diff options
| -rw-r--r-- | fs/jffs2/wbuf.c | 272 |
1 files changed, 102 insertions, 170 deletions
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index 45e3573cf10..0442a5753d3 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -613,20 +613,30 @@ int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c) return ret; } -int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino) + +static size_t jffs2_fill_wbuf(struct jffs2_sb_info *c, const uint8_t *buf, + size_t len) { - struct kvec outvecs[3]; - uint32_t totlen = 0; - uint32_t split_ofs = 0; - uint32_t old_totlen; - int ret, splitvec = -1; - int invec, outvec; - size_t wbuf_retlen; - unsigned char *wbuf_ptr; - size_t donelen = 0; + if (len && !c->wbuf_len && (len >= c->wbuf_pagesize)) + return 0; + + if (len > (c->wbuf_pagesize - c->wbuf_len)) + len = c->wbuf_pagesize - c->wbuf_len; + memcpy(c->wbuf + c->wbuf_len, buf, len); + c->wbuf_len += (uint32_t) len; + return len; +} + +int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, + unsigned long count, loff_t to, size_t *retlen, + uint32_t ino) +{ + struct jffs2_eraseblock *jeb; + size_t wbuf_retlen, donelen = 0; uint32_t outvec_to = to; + int ret, invec; - /* If not NAND flash, don't bother */ + /* If not writebuffered flash, don't bother */ if (!jffs2_is_writebuffered(c)) return jffs2_flash_direct_writev(c, invecs, count, to, retlen); @@ -639,9 +649,11 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig memset(c->wbuf,0xff,c->wbuf_pagesize); } - /* Fixup the wbuf if we are moving to a new eraseblock. The checks below - fail for ECC'd NOR because cleanmarker == 16, so a block starts at - xxx0010. */ + /* + * Fixup the wbuf if we are moving to a new eraseblock. The + * checks below fail for ECC'd NOR because cleanmarker == 16, + * so a block starts at xxx0010. + */ if (jffs2_nor_ecc(c)) { if (((c->wbuf_ofs % c->sector_size) == 0) && !c->wbuf_len) { c->wbuf_ofs = PAGE_DIV(to); @@ -650,23 +662,22 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig } } - /* Sanity checks on target address. - It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs), - and it's permitted to write at the beginning of a new - erase block. Anything else, and you die. - New block starts at xxx000c (0-b = block header) - */ + /* + * Sanity checks on target address. It's permitted to write + * at PAD(c->wbuf_len+c->wbuf_ofs), and it's permitted to + * write at the beginning of a new erase block. Anything else, + * and you die. New block starts at xxx000c (0-b = block + * header) + */ if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) { /* It's a write to a new block */ if (c->wbuf_len) { - D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs)); + D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx " + "causes flush of wbuf at 0x%08x\n", + (unsigned long)to, c->wbuf_ofs)); ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT); - if (ret) { - /* the underlying layer has to check wbuf_len to do the cleanup */ - D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret)); - *retlen = 0; - goto exit; - } + if (ret) + goto outerr; } /* set pointer to new block */ c->wbuf_ofs = PAGE_DIV(to); @@ -675,165 +686,70 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig if (to != PAD(c->wbuf_ofs + c->wbuf_len)) { /* We're not writing immediately after the writebuffer. Bad. */ - printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write to %08lx\n", (unsigned long)to); + printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write " + "to %08lx\n", (unsigned long)to); if (c->wbuf_len) printk(KERN_CRIT "wbuf was previously %08x-%08x\n", - c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len); - BUG(); - } - - /* Note outvecs[3] above. We know count is never greater than 2 */ - if (count > 2) { - printk(KERN_CRIT "jffs2_flash_writev(): count is %ld\n", count); + c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len); BUG(); } - invec = 0; - outvec = 0; - - /* Fill writebuffer first, if already in use */ - if (c->wbuf_len) { - uint32_t invec_ofs = 0; - - /* adjust alignment offset */ - if (c->wbuf_len != PAGE_MOD(to)) { - c->wbuf_len = PAGE_MOD(to); - /* take care of alignment to next page */ - if (!c->wbuf_len) - c->wbuf_len = c->wbuf_pagesize; - } - - while(c->wbuf_len < c->wbuf_pagesize) { - uint32_t thislen; - - if (invec == count) - goto alldone; - - thislen = c->wbuf_pagesize - c->wbuf_len; - - if (thislen >= invecs[invec].iov_len) - thislen = invecs[invec].iov_len; - - invec_ofs = thislen; - - memcpy(c->wbuf + c->wbuf_len, invecs[invec].iov_base, thislen); - c->wbuf_len += thislen; - donelen += thislen; - /* Get next invec, if actual did not fill the buffer */ - if (c->wbuf_len < c->wbuf_pagesize) - invec++; - } - - /* write buffer is full, flush buffer */ - ret = __jffs2_flush_wbuf(c, NOPAD); - if (ret) { - /* the underlying layer has to check wbuf_len to do the cleanup */ - D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret)); - /* Retlen zero to make sure our caller doesn't mark the space dirty. - We've already done everything that's necessary */ - *retlen = 0; - goto exit; - } - outvec_to += donelen; - c->wbuf_ofs = outvec_to; - - /* All invecs done ? */ - if (invec == count) - goto alldone; - - /* Set up the first outvec, containing the remainder of the - invec we partially used */ - if (invecs[invec].iov_len > invec_ofs) { - outvecs[0].iov_base = invecs[invec].iov_base+invec_ofs; - totlen = outvecs[0].iov_len = invecs[invec].iov_len-invec_ofs; - if (totlen > c->wbuf_pagesize) { - splitvec = outvec; - split_ofs = outvecs[0].iov_len - PAGE_MOD(totlen); - } - outvec++; - } - invec++; - } - - /* OK, now we've flushed the wbuf and the start of the bits - we have been asked to write, now to write the rest.... */ - - /* totlen holds the amount of data still to be written */ - old_totlen = totlen; - for ( ; invec < count; invec++,outvec++ ) { - outvecs[outvec].iov_base = invecs[invec].iov_base; - totlen += outvecs[outvec].iov_len = invecs[invec].iov_len; - if (PAGE_DIV(totlen) != PAGE_DIV(old_totlen)) { - splitvec = outvec; - split_ofs = outvecs[outvec].iov_len - PAGE_MOD(totlen); - old_totlen = totlen; + /* adjust alignment offset */ + if (c->wbuf_len != PAGE_MOD(to)) { + c->wbuf_len = PAGE_MOD(to); + /* take care of alignment to next page */ + if (!c->wbuf_len) { + c->wbuf_len = c->wbuf_pagesize; + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) + goto outerr; } } - /* Now the outvecs array holds all the remaining data to write */ - /* Up to splitvec,split_ofs is to be written immediately. The rest - goes into the (now-empty) wbuf */ - - if (splitvec != -1) { - uint32_t remainder; - - remainder = outvecs[splitvec].iov_len - split_ofs; - outvecs[splitvec].iov_len = split_ofs; - - /* We did cross a page boundary, so we write some now */ - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo); - else - ret = jffs2_flash_direct_writev(c, outvecs, splitvec+1, outvec_to, &wbuf_retlen); - - if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) { - /* At this point we have no problem, - c->wbuf is empty. However refile nextblock to avoid - writing again to same address. - */ - struct jffs2_eraseblock *jeb; + for (invec = 0; invec < count; invec++) { + int vlen = invecs[invec].iov_len; + uint8_t *v = invecs[invec].iov_base; - spin_lock(&c->erase_completion_lock); + wbuf_retlen = jffs2_fill_wbuf(c, v, vlen); - jeb = &c->blocks[outvec_to / c->sector_size]; - jffs2_block_refile(c, jeb, REFILE_ANYWAY); - - *retlen = 0; - spin_unlock(&c->erase_completion_lock); - goto exit; + if (c->wbuf_len == c->wbuf_pagesize) { + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) + goto outerr; } - + vlen -= wbuf_retlen; + outvec_to += wbuf_retlen; donelen += wbuf_retlen; - c->wbuf_ofs = PAGE_DIV(outvec_to) + PAGE_DIV(totlen); - - if (remainder) { - outvecs[splitvec].iov_base += split_ofs; - outvecs[splitvec].iov_len = remainder; - } else { - splitvec++; + v += wbuf_retlen; + + if (vlen >= c->wbuf_pagesize) { + ret = c->mtd->write(c->mtd, outvec_to, PAGE_DIV(vlen), + &wbuf_retlen, v); + if (ret < 0 || wbuf_retlen != PAGE_DIV(vlen)) + goto outfile; + + vlen -= wbuf_retlen; + outvec_to += wbuf_retlen; + c->wbuf_ofs = outvec_to; + donelen += wbuf_retlen; + v += wbuf_retlen; } - } else { - splitvec = 0; - } - - /* Now splitvec points to the start of the bits we have to copy - into the wbuf */ - wbuf_ptr = c->wbuf; + wbuf_retlen = jffs2_fill_wbuf(c, v, vlen); + if (c->wbuf_len == c->wbuf_pagesize) { + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) + goto outerr; + } - for ( ; splitvec < outvec; splitvec++) { - /* Don't copy the wbuf into itself */ - if (outvecs[splitvec].iov_base == c->wbuf) - continue; - memcpy(wbuf_ptr, outvecs[splitvec].iov_base, outvecs[splitvec].iov_len); - wbuf_ptr += outvecs[splitvec].iov_len; - donelen += outvecs[splitvec].iov_len; + outvec_to += wbuf_retlen; + donelen += wbuf_retlen; } - c->wbuf_len = wbuf_ptr - c->wbuf; - /* If there's a remainder in the wbuf and it's a non-GC write, - remember that the wbuf affects this ino */ -alldone: + /* + * If there's a remainder in the wbuf and it's a non-GC write, + * remember that the wbuf affects this ino + */ *retlen = donelen; if (jffs2_sum_active()) { @@ -846,8 +762,24 @@ alldone: jffs2_wbuf_dirties_inode(c, ino); ret = 0; + up_write(&c->wbuf_sem); + return ret; -exit: +outfile: + /* + * At this point we have no problem, c->wbuf is empty. However + * refile nextblock to avoid writing again to same address. + */ + + spin_lock(&c->erase_completion_lock); + + jeb = &c->blocks[outvec_to / c->sector_size]; + jffs2_block_refile(c, jeb, REFILE_ANYWAY); + + spin_unlock(&c->erase_completion_lock); + +outerr: + *retlen = 0; up_write(&c->wbuf_sem); return ret; } |