diff options
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 2 | ||||
| -rw-r--r-- | sound/pci/hda/hda_intel.c | 23 |
2 files changed, 21 insertions, 4 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index d49325ed706..587eddcad91 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -615,7 +615,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-hda-intel -------------------- - Module for Intel HD Audio (ICH6, ICH6M, ICH7) + Module for Intel HD Audio (ICH6, ICH6M, ICH7), ATI SB450 model - force the model name position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 104593fa08e..d8329a79bcd 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -68,7 +68,8 @@ MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{Intel, ICH6M}," "{Intel, ICH7}," - "{Intel, ESB2}}"); + "{Intel, ESB2}," + "{ATI, SB450}}"); MODULE_DESCRIPTION("Intel HDA driver"); #define SFX "hda-intel: " @@ -153,7 +154,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; /* STATESTS int mask: SD2,SD1,SD0 */ #define STATESTS_INT_MASK 0x07 -#define AZX_MAX_CODECS 3 +#define AZX_MAX_CODECS 4 /* SD_CTL bits */ #define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ @@ -193,6 +194,12 @@ enum { POS_FIX_POSBUF }; +/* Defines for ATI HD Audio support in SB450 south bridge */ +#define ATI_SB450_HDAUDIO_PCI_DEVICE_ID 0x437b +#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 +#define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 + + /* * Use CORB/RIRB for communication from/to codecs. * This is the way recommended by Intel (see below). @@ -644,7 +651,7 @@ static void azx_stream_stop(azx_t *chip, azx_dev_t *azx_dev) */ static void azx_init_chip(azx_t *chip) { - unsigned char tcsel_reg; + unsigned char tcsel_reg, ati_misc_cntl2; /* Clear bits 0-2 of PCI register TCSEL (at offset 0x44) * TCSEL == Traffic Class Select Register, which sets PCI express QOS @@ -668,6 +675,15 @@ static void azx_init_chip(azx_t *chip) azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); azx_writel(chip, DPUBASE, upper_32bit(chip->posbuf.addr)); } + + /* For ATI SB450 azalia HD audio, we need to enable snoop */ + if (chip->pci->vendor == PCI_VENDOR_ID_ATI && + chip->pci->device == ATI_SB450_HDAUDIO_PCI_DEVICE_ID) { + pci_read_config_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, + &ati_misc_cntl2); + pci_write_config_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, + (ati_misc_cntl2 & 0xf8) | ATI_SB450_HDAUDIO_ENABLE_SNOOP); + } } @@ -1435,6 +1451,7 @@ static struct pci_device_id azx_ids[] = { { 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICH6 */ { 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICH7 */ { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */ + { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */ { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); |