aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/sysfs-interface57
-rw-r--r--Documentation/vm/hwpoison.txt136
-rw-r--r--MAINTAINERS150
-rw-r--r--arch/arm/configs/n8x0_defconfig2
-rw-r--r--arch/arm/configs/u300_defconfig94
-rw-r--r--arch/arm/include/asm/elf.h3
-rw-r--r--arch/arm/include/asm/tlbflush.h3
-rw-r--r--arch/arm/kernel/entry-armv.S28
-rw-r--r--arch/arm/kernel/entry-header.S15
-rw-r--r--arch/arm/kernel/process.c9
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c2
-rw-r--r--arch/arm/mach-ep93xx/core.c1
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c2
-rw-r--r--arch/arm/mach-ep93xx/include/mach/platform.h1
-rw-r--r--arch/arm/mach-mx2/clock_imx27.c8
-rw-r--r--arch/arm/mach-mx2/pcm038.c96
-rw-r--r--arch/arm/mach-mx2/pcm970-baseboard.c2
-rw-r--r--arch/arm/mach-mx25/devices.c19
-rw-r--r--arch/arm/mach-mx25/mx25pdk.c25
-rw-r--r--arch/arm/mach-mx3/clock-imx35.c2
-rw-r--r--arch/arm/mach-mx3/clock.c2
-rw-r--r--arch/arm/mach-mx3/devices.c24
-rw-r--r--arch/arm/mach-mx3/devices.h6
-rw-r--r--arch/arm/mach-mx3/mm.c2
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c6
-rw-r--r--arch/arm/mach-omap1/board-generic.c8
-rw-r--r--arch/arm/mach-omap1/board-innovator.c20
-rw-r--r--arch/arm/mach-omap1/board-palmte.c8
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c8
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c8
-rw-r--r--arch/arm/mach-omap1/board-sx1.c8
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c8
-rw-r--r--arch/arm/mach-omap1/serial.c26
-rw-r--r--arch/arm/mach-omap2/Kconfig12
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c2
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c4
-rw-r--r--arch/arm/mach-omap2/board-ldp.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51.c1
-rw-r--r--arch/arm/mach-omap2/board-zoom2.c2
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/pm34xx.c7
-rw-r--r--arch/arm/mach-omap2/serial.c10
-rw-r--r--arch/arm/mach-pxa/cm-x300.c38
-rw-r--r--arch/arm/mach-pxa/spitz.c39
-rw-r--r--arch/arm/mm/Kconfig5
-rw-r--r--arch/arm/oprofile/op_model_v6.c3
-rw-r--r--arch/arm/plat-omap/dma.c18
-rw-r--r--arch/arm/plat-omap/include/mach/keypad.h5
-rw-r--r--arch/arm/plat-omap/iommu.c2
-rw-r--r--arch/frv/kernel/signal.c2
-rw-r--r--arch/x86/boot/setup.ld3
-rw-r--r--arch/x86/include/asm/topology.h1
-rw-r--r--arch/x86/include/asm/uv/uv_hub.h23
-rw-r--r--arch/x86/kernel/acpi/realmode/wakeup.lds.S3
-rw-r--r--arch/x86/kernel/apic/x2apic_uv_x.c8
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce.c3
-rw-r--r--arch/x86/kernel/tlb_uv.c9
-rw-r--r--arch/x86/kernel/vmlinux.lds.S3
-rw-r--r--drivers/block/loop.c2
-rw-r--r--drivers/cpuidle/cpuidle.c5
-rw-r--r--drivers/edac/i5000_edac.c7
-rw-r--r--drivers/edac/i5400_edac.c89
-rw-r--r--drivers/edac/mpc85xx_edac.c2
-rw-r--r--drivers/gpio/twl4030-gpio.c5
-rw-r--r--drivers/hwmon/dme1737.c29
-rw-r--r--drivers/hwmon/fschmd.c2
-rw-r--r--drivers/hwmon/hp_accel.c5
-rw-r--r--drivers/hwmon/it87.c5
-rw-r--r--drivers/mfd/twl4030-core.c2
-rw-r--r--drivers/mfd/wm831x-irq.c3
-rw-r--r--drivers/mmc/host/omap_hsmmc.c2
-rw-r--r--drivers/mtd/ubi/build.c3
-rw-r--r--drivers/mtd/ubi/scan.c7
-rw-r--r--drivers/mtd/ubi/scan.h2
-rw-r--r--drivers/pcmcia/cistpl.c20
-rw-r--r--drivers/pcmcia/cs_internal.h3
-rw-r--r--drivers/pcmcia/ds.c8
-rw-r--r--drivers/pcmcia/i82365.c4
-rw-r--r--drivers/pcmcia/m32r_cfc.c10
-rw-r--r--drivers/pcmcia/m32r_pcc.c10
-rw-r--r--drivers/pcmcia/m8xx_pcmcia.c15
-rw-r--r--drivers/pcmcia/pcmcia_ioctl.c2
-rw-r--r--drivers/pcmcia/pd6729.c6
-rw-r--r--drivers/pcmcia/rsrc_nonstatic.c3
-rw-r--r--drivers/pcmcia/soc_common.c5
-rw-r--r--drivers/pcmcia/socket_sysfs.c2
-rw-r--r--drivers/pcmcia/tcic.c4
-rw-r--r--drivers/serial/8250_pci.c78
-rw-r--r--drivers/serial/atmel_serial.c2
-rw-r--r--drivers/usb/gadget/Kconfig1
-rw-r--r--fs/hfs/btree.c5
-rw-r--r--fs/hfsplus/wrapper.c4
-rw-r--r--fs/proc/meminfo.c2
-rw-r--r--fs/xfs/quota/xfs_qm_syscalls.c1
-rw-r--r--include/linux/cpufreq.h7
-rw-r--r--include/linux/pci_ids.h7
-rw-r--r--include/linux/prctl.h12
-rw-r--r--include/linux/rcutree.h6
-rw-r--r--include/linux/string.h2
-rw-r--r--include/linux/topology.h4
-rw-r--r--kernel/cgroup.c8
-rw-r--r--kernel/exit.c4
-rw-r--r--kernel/futex.c24
-rw-r--r--kernel/perf_event.c2
-rw-r--r--kernel/rcutree.c44
-rw-r--r--kernel/rcutree.h10
-rw-r--r--kernel/rcutree_plugin.h46
-rw-r--r--kernel/sched_fair.c27
-rw-r--r--kernel/sys.c25
-rw-r--r--kernel/sysctl_check.c2
-rw-r--r--kernel/workqueue.c21
-rw-r--r--mm/Kconfig2
-rw-r--r--mm/memory-failure.c59
-rw-r--r--mm/memory.c14
-rw-r--r--mm/mempolicy.c13
-rw-r--r--mm/page_alloc.c3
-rw-r--r--mm/vmscan.c14
-rwxr-xr-xscripts/checkpatch.pl84
-rwxr-xr-xscripts/get_maintainer.pl37
-rw-r--r--tools/perf/builtin-timechart.c28
-rw-r--r--tools/perf/builtin-top.c2
-rwxr-xr-xtools/perf/util/PERF-VERSION-GEN2
-rw-r--r--tools/perf/util/svghelper.c2
126 files changed, 1361 insertions, 507 deletions
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index dcbd502c879..82def883361 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -353,10 +353,20 @@ power[1-*]_average Average power use
Unit: microWatt
RO
-power[1-*]_average_interval Power use averaging interval
+power[1-*]_average_interval Power use averaging interval. A poll
+ notification is sent to this file if the
+ hardware changes the averaging interval.
Unit: milliseconds
RW
+power[1-*]_average_interval_max Maximum power use averaging interval
+ Unit: milliseconds
+ RO
+
+power[1-*]_average_interval_min Minimum power use averaging interval
+ Unit: milliseconds
+ RO
+
power[1-*]_average_highest Historical average maximum power use
Unit: microWatt
RO
@@ -365,6 +375,18 @@ power[1-*]_average_lowest Historical average minimum power use
Unit: microWatt
RO
+power[1-*]_average_max A poll notification is sent to
+ power[1-*]_average when power use
+ rises above this value.
+ Unit: microWatt
+ RW
+
+power[1-*]_average_min A poll notification is sent to
+ power[1-*]_average when power use
+ sinks below this value.
+ Unit: microWatt
+ RW
+
power[1-*]_input Instantaneous power use
Unit: microWatt
RO
@@ -381,6 +403,39 @@ power[1-*]_reset_history Reset input_highest, input_lowest,
average_highest and average_lowest.
WO
+power[1-*]_accuracy Accuracy of the power meter.
+ Unit: Percent
+ RO
+
+power[1-*]_alarm 1 if the system is drawing more power than the
+ cap allows; 0 otherwise. A poll notification is
+ sent to this file when the power use exceeds the
+ cap. This file only appears if the cap is known
+ to be enforced by hardware.
+ RO
+
+power[1-*]_cap If power use rises above this limit, the
+ system should take action to reduce power use.
+ A poll notification is sent to this file if the
+ cap is changed by the hardware. The *_cap
+ files only appear if the cap is known to be
+ enforced by hardware.
+ Unit: microWatt
+ RW
+
+power[1-*]_cap_hyst Margin of hysteresis built around capping and
+ notification.
+ Unit: microWatt
+ RW
+
+power[1-*]_cap_max Maximum cap that can be set.
+ Unit: microWatt
+ RO
+
+power[1-*]_cap_min Minimum cap that can be set.
+ Unit: microWatt
+ RO
+
**********
* Energy *
**********
diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt
new file mode 100644
index 00000000000..3ffadf8da61
--- /dev/null
+++ b/Documentation/vm/hwpoison.txt
@@ -0,0 +1,136 @@
+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+ All memory failures cause a panic. Do not attempt recovery.
+ (on x86 this can be also affected by the tolerant level of the
+ MCE subsystem)
+
+early kill
+ (can be controlled globally and per process)
+ Send SIGBUS to the application as soon as the error is detected
+ This allows applications who can process memory errors in a gentle
+ way (e.g. drop affected object)
+ This is the mode used by KVM qemu.
+
+late kill
+ Send SIGBUS when the application runs into the corrupted page.
+ This is best for memory error unaware applications and default
+ Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+ See sysctl.txt
+
+vm.memory_failure_early_kill
+ Enable early kill mode globally
+
+PR_MCE_KILL
+ Set early/late kill mode/revert to system default
+ arg1: PR_MCE_KILL_CLEAR: Revert to system default
+ arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+ PR_MCE_KILL_EARLY: Early kill
+ PR_MCE_KILL_LATE: Late kill
+ PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+ return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+ (as root)
+ Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+ /sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+ Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+ Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+ x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 88241154f4c..a1a2aceca5b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -65,43 +65,51 @@ trivial patch so apply some common sense.
8. Happy hacking.
- -----------------------------------
-
-Maintainers List (try to look for most precise areas first)
+Descriptions of section entries:
+
+ P: Person (obsolete)
+ M: Mail patches to: FullName <address@domain>
+ L: Mailing list that is relevant to this area
+ W: Web-page with status/info
+ T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
+ S: Status, one of the following:
+ Supported: Someone is actually paid to look after this.
+ Maintained: Someone actually looks after it.
+ Odd Fixes: It has a maintainer but they don't have time to do
+ much other than throw the odd patch in. See below..
+ Orphan: No current maintainer [but maybe you could take the
+ role as you write your new code].
+ Obsolete: Old code. Something tagged obsolete generally means
+ it has been replaced by a better system and you
+ should be using that.
+ F: Files and directories with wildcard patterns.
+ A trailing slash includes all files and subdirectory files.
+ F: drivers/net/ all files in and below drivers/net
+ F: drivers/net/* all files in drivers/net, but not below
+ F: */net/* all files in "any top level directory"/net
+ One pattern per line. Multiple F: lines acceptable.
+ X: Files and directories that are NOT maintained, same rules as F:
+ Files exclusions are tested before file matches.
+ Can be useful for excluding a specific subdirectory, for instance:
+ F: net/
+ X: net/ipv6/
+ matches all files in and below net excluding net/ipv6/
+ K: Keyword perl extended regex pattern to match content in a
+ patch or file. For instance:
+ K: of_get_profile
+ matches patches or files that contain "of_get_profile"
+ K: \b(printk|pr_(info|err))\b
+ matches patches or files that contain one or more of the words
+ printk, pr_info or pr_err
+ One regex pattern per line. Multiple K: lines acceptable.
Note: For the hard of thinking, this list is meant to remain in alphabetical
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
-P: Person (obsolete)
-M: Mail patches to: FullName <address@domain>
-L: Mailing list that is relevant to this area
-W: Web-page with status/info
-T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
-S: Status, one of the following:
-
- Supported: Someone is actually paid to look after this.
- Maintained: Someone actually looks after it.
- Odd Fixes: It has a maintainer but they don't have time to do
- much other than throw the odd patch in. See below..
- Orphan: No current maintainer [but maybe you could take the
- role as you write your new code].
- Obsolete: Old code. Something tagged obsolete generally means
- it has been replaced by a better system and you
- should be using that.
+Maintainers List (try to look for most precise areas first)
-F: Files and directories with wildcard patterns.
- A trailing slash includes all files and subdirectory files.
- F: drivers/net/ all files in and below drivers/net
- F: drivers/net/* all files in drivers/net, but not below
- F: */net/* all files in "any top level directory"/net
- One pattern per line. Multiple F: lines acceptable.
-X: Files and directories that are NOT maintained, same rules as F:
- Files exclusions are tested before file matches.
- Can be useful for excluding a specific subdirectory, for instance:
- F: net/
- X: net/ipv6/
- matches all files in and below net excluding net/ipv6/
+ -----------------------------------
3C505 NETWORK DRIVER
M: Philip Blundell <philb@gnu.org>
@@ -992,7 +1000,7 @@ F: drivers/net/atlx/
ATM
M: Chas Williams <chas@cmf.nrl.navy.mil>
-L: linux-atm-general@lists.sourceforge.net (subscribers-only)
+L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
S: Maintained
@@ -1480,6 +1488,7 @@ F: mm/*cgroup*
CORETEMP HARDWARE MONITORING DRIVER
M: Rudolf Marek <r.marek@assembler.cz>
+M: Huaxu Wan <huaxu.wan@intel.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/coretemp
@@ -2151,7 +2160,7 @@ S: Supported
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
-FREESCALE USB PERIPHERIAL DRIVERS
+FREESCALE USB PERIPHERAL DRIVERS
M: Li Yang <leoli@freescale.com>
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
@@ -2202,18 +2211,6 @@ F: Documentation/filesystems/caching/
F: fs/fscache/
F: include/linux/fscache*.h
-TRACING
-M: Steven Rostedt <rostedt@goodmis.org>
-M: Frederic Weisbecker <fweisbec@gmail.com>
-M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
-S: Maintained
-F: Documentation/trace/ftrace.txt
-F: arch/*/*/*/ftrace.h
-F: arch/*/kernel/ftrace.c
-F: include/*/ftrace.h include/trace/ include/linux/trace*.h
-F: kernel/trace/
-
FUJITSU FR-V (FRV) PORT
M: David Howells <dhowells@redhat.com>
S: Maintained
@@ -2272,9 +2269,8 @@ S: Maintained
F: include/asm-generic
GENERIC UIO DRIVER FOR PCI DEVICES
-M: Michael S. Tsirkin <mst@redhat.com>
+M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/uio/uio_pci_generic.c
@@ -3004,8 +3000,8 @@ F: scripts/Makefile.*
KERNEL JANITORS
L: kernel-janitors@vger.kernel.org
-W: http://www.kerneljanitors.org/
-S: Maintained
+W: http://janitor.kernelnewbies.org/
+S: Odd Fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
M: "J. Bruce Fields" <bfields@fieldses.org>
@@ -3785,7 +3781,7 @@ F: drivers/video/riva/
F: drivers/video/nvidia/
OMAP SUPPORT
-M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
+M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
@@ -3890,6 +3886,15 @@ S: Maintained
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
+OPEN FIRMWARE AND FLATTENED DEVICE TREE
+M: Grant Likely <grant.likely@secretlab.ca>
+L: devicetree-discuss@lists.ozlabs.org
+W: http://fdt.secretlab.ca
+S: Maintained
+F: drivers/of
+F: include/linux/of*.h
+K: of_get_property
+
OPROFILE
M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
@@ -4325,7 +4330,7 @@ F: drivers/video/aty/aty128fb.c
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
L: linux-wireless@vger.kernel.org
-L: users@rt2x00.serialmonkey.com
+L: users@rt2x00.serialmonkey.com (moderated for non-subscribers)
W: http://rt2x00.serialmonkey.com/
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
@@ -4534,12 +4539,11 @@ F: kernel/sched*
F: include/linux/sched.h
SCORE ARCHITECTURE
-P: Chen Liqin
-M: liqin.chen@sunplusct.com
-P: Lennox Wu
-M: lennox.wu@gmail.com
+M: Chen Liqin <liqin.chen@sunplusct.com>
+M: Lennox Wu <lennox.wu@gmail.com>
W: http://www.sunplusct.com
S: Supported
+F: arch/score/
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
@@ -4612,20 +4616,20 @@ S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S: Orphan
-L: linux-mmc@vger.kernel.org
-F: drivers/mmc/host/sdhci.*
+S: Orphan
+L: linux-mmc@vger.kernel.org
+F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
M: Anton Vorontsov <avorontsov@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
-L: linux-mmc@vger.kernel.org
+L: linux-mmc@vger.kernel.org
S: Maintained
-F: drivers/mmc/host/sdhci-of.*
+F: drivers/mmc/host/sdhci-of.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
M: Ben Dooks <ben-linux@fluff.org>
-L: linux-mmc@vger.kernel.org
+L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
@@ -4728,8 +4732,7 @@ F: drivers/usb/gadget/lh7a40*
F: drivers/usb/host/ohci-lh7a40*
SIMPLE FIRMWARE INTERFACE (SFI)
-P: Len Brown
-M: lenb@kernel.org
+M: Len Brown <lenb@kernel.org>
L: sfi-devel@simplefirmware.org
W: http://simplefirmware.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
@@ -5177,6 +5180,20 @@ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/char/tpm/
+TRACING
+M: Steven Rostedt <rostedt@goodmis.org>
+M: Frederic Weisbecker <fweisbec@gmail.com>
+M: Ingo Molnar <mingo@redhat.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+S: Maintained
+F: Documentation/trace/ftrace.txt
+F: arch/*/*/*/ftrace.h
+F: arch/*/kernel/ftrace.c
+F: include/*/ftrace.h
+F: include/linux/trace*.h
+F: include/trace/
+F: kernel/trace/
+
TRIVIAL PATCHES
M: Jiri Kosina <trivial@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
@@ -5743,8 +5760,7 @@ S: Maintained
F: drivers/scsi/wd7000.c
WINBOND CIR DRIVER
-P: David Härdeman
-M: david@hardeman.nu
+M: David Härdeman <david@hardeman.nu>
S: Maintained
F: drivers/input/misc/winbond-cir.c
@@ -5801,9 +5817,7 @@ F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS PMIC DRIVERS
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
-L: linux-kernel@vger.kernel.org
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
S: Supported
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 8da75dede52..264f52b5c52 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
CONFIG_ZBOOT_ROM_BSS=0x10200000
# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 7d61ae6e75d..953ba0297fc 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
# CONFIG_AIO is not set
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_U300=y
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
#
# All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
#
CONFIG_MMC_ARMMMCI=y
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c3b911ee915..6aac3f5bb2f 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a45ab5dd825..c2f1605de35 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
if (tlb_flag(TLB_WB))
dsb();
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+ if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
if (tlb_flag(TLB_V4_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
}
+ put_cpu();
if (tlb_flag(TLB_V6_U_ASID))
asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 322410be573..0022b4d57f8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -608,33 +608,33 @@ call_fpe:
THUMB( add pc, r8 )
nop
- W(mov) pc, lr @ CP#0
+ movw_pc lr @ CP#0
W(b) do_fpe @ CP#1 (FPE)
W(b) do_fpe @ CP#2 (FPE)
- W(mov) pc, lr @ CP#3
+ movw_pc lr @ CP#3
#ifdef CONFIG_CRUNCH
b crunch_task_enable @ CP#4 (MaverickCrunch)
b crunch_task_enable @ CP#5 (MaverickCrunch)
b crunch_task_enable @ CP#6 (MaverickCrunch)
#else
- W(mov) pc, lr @ CP#4
- W(mov) pc, lr @ CP#5
- W(mov) pc, lr @ CP#6
+ movw_pc lr @ CP#4
+ movw_pc lr @ CP#5
+ movw_pc lr @ CP#6
#endif
- W(mov) pc, lr @ CP#7
- W(mov) pc, lr @ CP#8
- W(mov) pc, lr @ CP#9
+ movw_pc lr @ CP#7
+ movw_pc lr @ CP#8
+ movw_pc lr @ CP#9
#ifdef CONFIG_VFP
W(b) do_vfp @ CP#10 (VFP)
W(b) do_vfp @ CP#11 (VFP)
#else
- W(mov) pc, lr @ CP#10 (VFP)
- W(mov) pc, lr @ CP#11 (VFP)
+ movw_pc lr @ CP#10 (VFP)
+ movw_pc lr @ CP#11 (VFP)
#endif
- W(mov) pc, lr @ CP#12
- W(mov) pc, lr @ CP#13
- W(mov) pc, lr @ CP#14 (Debug)
- W(mov) pc, lr @ CP#15 (Control)
+ movw_pc lr @ CP#12
+ movw_pc lr @ CP#13
+ movw_pc lr @ CP#14 (Debug)
+ movw_pc lr @ CP#15 (Control)
#ifdef CONFIG_NEON
.align 6
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ac34c0d9384..7e9ed1eea40 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -110,6 +110,13 @@
mov \rd, sp, lsr #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ .endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
clrex @ clear the exclusive monitor
@@ -146,6 +153,14 @@
lsr \rd, \rd, #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ nop
+ .endm
#endif /* !CONFIG_THUMB2_KERNEL */
/*
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 790fbee92ec..0d96d0171c0 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
}
/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
+ return 1;
+}
+
+/*
* fill in the fpe structure for a core dump...
*/
int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d581cff80c4..332b784050b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void)
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f95dc160c34..b4357c388d2 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- desc = irq_desc + gpio_irq;
generic_handle_irq(gpio_irq);
}
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index ca71cf1a72a..a4a7be30800 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void)
ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xx_i2c_board_info,
ARRAY_SIZE(edb93xx_i2c_board_info));
}
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index a3ec33fd79d..469fd968d51 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,6 @@ struct ep93xx_eth_data
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
/* EP93xx System Controller software locked register write */
void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4089951acb4..ff5e3329891 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
- _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
- _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ee65dda584c..906d59b0a7a 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -23,6 +23,10 @@
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
#include <mach/iomux.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
PC6_PF_I2C2_SCL,
/* SPI1 */
PD25_PF_CSPI1_RDY,
- PD27_PF_CSPI1_SS1,
- PD28_PF_CSPI1_SS0,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
}
};
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+ .chipselect = pcm038_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+ {
+ .dev = &mxc_sdhc_device1.dev,
+ .supply = "sdhc_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc1_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+ .consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = NULL,
+ .supply = "imx_cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_data,
+ }, {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc1_data,
+ },
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+ .regulators = pcm038_regulators,
+ .num_regulators = ARRAY_SIZE(pcm038_regulators),
+ .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+ MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IRQ_GPIOB(23),
+ .max_speed_hz = 300000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &pcm038_pmic,
+ .mode = SPI_CS_HIGH,
+ }
+};
+
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
/* PE18 for user-LED D40 */
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+ /* MC13783 IRQ */
+ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+ mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+ spi_register_board_info(pcm038_spi_board_info,
+ ARRAY_SIZE(pcm038_spi_board_info));
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index c261f59b0b4..3cb7f457e5d 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
- GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
"PCM970");
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index eb12de1da42..63511de3a55 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/mx25.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 92aa4fd19d9..d23ae571c03 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
static void __init mx25pdk_init(void)
{
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
- mxc_register_device(&mxc_nand_device, &nand_board_info);
}
-
static void __init mx25pdk_timer_init(void)
{
mx25_clocks_init(26000000);
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index fe5c4217322..c595260ec1f 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 06bd6180bfc..b2a3bcf8266 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "epit", epit1_clk)
_REGISTER_CLOCK(NULL, "epit", epit2_clk)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 8a577f36725..e6abe181b96 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
* SPI master controller
* 3 channels
*/
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
{
.start = CSPI1_BASE_ADDR,
.end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
},
};
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
{
.start = CSPI2_BASE_ADDR,
.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
},
};
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
{
.start = CSPI3_BASE_ADDR,
.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
},
};
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
.name = "spi_imx",
.id = 0,
- .num_resources = ARRAY_SIZE(imx_spi_0_resources),
- .resource = imx_spi_0_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+ .resource = mxc_spi_0_resources,
};
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
.name = "spi_imx",
.id = 1,
- .num_resources = ARRAY_SIZE(imx_spi_1_resources),
- .resource = imx_spi_1_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+ .resource = mxc_spi_1_resources,
};
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
.name = "spi_imx",
.id = 2,
- .num_resources = ARRAY_SIZE(imx_spi_2_resources),
- .resource = imx_spi_2_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+ .resource = mxc_spi_2_resources,
};
#ifdef CONFIG_ARCH_MX35
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 79f2be45d13..ab87419dc9a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index ad5a1122d76..bedf5b8d976 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#ifdef CONFIG_ARCH_MX35
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#endif
void __init mx31_init_irq(void)
{
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 42920f9c1a1..8ad5cc3e83e 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
static void __init ams_delta_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+ omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239da72..6c8a41f20e5 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_usb_init(&generic1510_usb_config);
}
#endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cc2abbb2d0f..cd6c3951482 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -376,6 +376,26 @@ static void __init innovator_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
+ unsigned char reg;
+
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM1_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM2_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
spi_register_board_info(innovator1510_boardinfo,
ARRAY_SIZE(innovator1510_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 90dd0431b0d..4de258420f3 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
static void __init omap_palmte_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_board_config = palmte_config;
omap_board_config_size = ARRAY_SIZE(palmte_config);
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8256139891f..d972cf941b7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
static void __init omap_palmtt_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_mpu_wdt_mode(0);
omap_board_config = palmtt_config;
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 81b6bde1c5a..986bd4df0e9 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
static void __init
omap_palmz71_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
palmz71_gpio_setup(1);
omap_mpu_wdt_mode(0);
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 02c85ca2e1d..056ae64e0f5 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
static void __init omap_sx1_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
omap_board_config = sx1_config;
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c06e7a55347..07b07522d5b 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
static void __init voiceblue_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
/* Watchdog */
gpio_request(0, "Watchdog");
/* smc91x reset */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d496e50fec4..d23979bc0fd 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
}
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- unsigned char reg;
-
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
if (cpu_is_omap15xx())
clk_set_rate(uart1_ck, 12000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
- if (machine_is_omap_innovator()) {
- reg = fpga_read(OMAP1510_FPGA_POWER);
- reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
- udelay(10);
- }
- }
break;
case 1:
uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
else
clk_set_rate(uart2_ck, 48000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
- if (machine_is_omap_innovator()) {
- reg = fpga_read(OMAP1510_FPGA_POWER);
- reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
- udelay(10);
- }
- }
break;
case 2:
uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
if (cpu_is_omap15xx())
clk_set_rate(uart3_ck, 12000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
- }
break;
}
omap_serial_reset(&serial_platform_data[i]);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 75b1c7efae7..aad194f61a3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_NOKIA_N800
+ bool
+
+config MACH_NOKIA_N810
+ bool
+
+config MACH_NOKIA_N810_WIMAX
+ bool
+
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on ARCH_OMAP2420
+ select MACH_NOKIA_N800
+ select MACH_NOKIA_N810
+ select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index efaf053eba8..0acb5560229 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
#include <mach/gpmc.h>
#include <mach/control.h>
-#include <mach/keypad.h>
#include <mach/gpmc-smc91x.h>
#include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40ea83..609a5a4a7e2 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
static void __init omap_4430sdp_init_irq(void)
{
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
static void __init omap_4430sdp_init(void)
{
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
- omap_board_config = sdp4430_config;
- omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap_serial_init();
}
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d110a7fdfbd..d57ec2f4d0a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
@@ -41,7 +42,6 @@
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index e4ec0c59121..4c4d7f8dbd7 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
#include <mach/usb.h>
#include <mach/common.h>
#include <mach/mcspi.h>
-#include <mach/keypad.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f6bf8772af..5326e0d6159 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -27,6 +27,7 @@
#include <linux/i2c/twl4030.h>
#include <linux/leds.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include <mach/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 2b0eb1ba5d7..e34d96a825e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
#include <mach/common.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
-#include <mach/keypad.h>
#include <mach/onenand.h>
#include <mach/gpmc-smc91x.h>
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f9196c3b1a7..78869a9a1cc 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/common.h>
-#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index fd3369d5e5c..ea00486a5e5 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
@@ -22,7 +23,6 @@
#include <mach/common.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include "mmc-twl4030.h"
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e3a3bad1d84..56be87d13ed 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
+#endif
omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
omap_hwmod_late_init();
omap_pm_if_init();
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 378c2f61835..89463190923 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void)
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- /* Enable GPIO wakeups in PER */
+ /* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+ OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_GRPSEL_GPIO6,
+ OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index ae2186892c8..54dfeb5d566 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
-#ifdef CONFIG_ARCH_OMAP4
- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
- .mapbase = OMAP_UART4_BASE,
- .irq = 70,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
-#endif
.flags = 0
}
};
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda60e0..102916f1e46 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
#define CM_X300_ETH_PHYS 0x08000010
-#define GPIO82_MMC2_IRQ (82)
-#define GPIO85_MMC2_WP (85)
+#define GPIO82_MMC_IRQ (82)
+#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
@@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {}
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC_IRQ,
+ .gpio_card_ro = GPIO85_MMC_WP,
+ .gpio_power = -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
- irq_handler_t cm_x300_detect_int,
- void *data)
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
{
return 0;
}
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
{
}
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci_init,
- .exit = cm_x300_mci_exit,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = GPIO82_MMC2_IRQ,
- .gpio_card_ro = GPIO85_MMC2_WP,
- .gpio_power = -1,
-};
-
static void __init cm_x300_init_mmc(void)
{
pxa_set_mci_info(&cm_x300_mci_platform_data);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d6038ce8..82ff5733e4d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
};
+static struct gpio_keys_button spitz_gpio_keys[] = {
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = SPITZ_GPIO_ON_KEY,
+ .desc = "On/Off",
+ .wakeup = 1,
+ },
+ /* Two buttons detecting the lid state */
+ {
+ .type = EV_SW,
+ .code = 0,
+ .gpio = SPITZ_GPIO_SWA,
+ .desc = "Display Down",
+ },
+ {
+ .type = EV_SW,
+ .code = 1,
+ .gpio = SPITZ_GPIO_SWB,
+ .desc = "Lid Closed",
+ },
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+ .buttons = spitz_gpio_keys,
+ .nbuttons = ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_keys_platform_data,
+ },
+};
+
+
/*
* Spitz LEDs
*/
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
+ &spitz_gpio_keys_device,
&spitzled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e993140edd8..9264d814cd7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -122,10 +122,7 @@ config CPU_ARM920T
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
- and is used in the Maverick EP9312 and the Samsung S3C2410.
-
- More information on the Maverick EP9312 at
- <http://linuxdevices.com/products/PD2382866068.html>.
+ and is used in the Cirrus EP93xx and the Samsung S3C2410.
Say Y if you want support for the ARM920T processor.
Otherwise, say N.
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index fe581383d3e..f7d2ec5ee9a 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -33,6 +33,9 @@ static int irqs[] = {
#ifdef CONFIG_ARCH_OMAP2
3,
#endif
+#ifdef CONFIG_ARCH_BCMRING
+ IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
};
static void armv6_pmu_stop(void)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 0eb676d7e80..b53125f4129 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -978,6 +978,14 @@ void omap_stop_dma(int lch)
{
u32 l;
+ /* Disable all interrupts on the channel */
+ if (cpu_class_is_omap1())
+ dma_write(0, CICR(lch));
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -995,18 +1003,8 @@ void omap_stop_dma(int lch)
next_lch = dma_chan[cur_lch].next_lch;
cur_lch = next_lch;
} while (next_lch != -1);
-
- return;
}
- /* Disable all interrupts on the channel */
- if (cpu_class_is_omap1())
- dma_write(0, CICR(lch));
-
- l = dma_read(CCR(lch));
- l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
-
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
EXPORT_SYMBOL(omap_stop_dma);
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index d91b9be334f..3ae52ccc793 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,7 +10,7 @@
#ifndef ASMARM_ARCH_KEYPAD_H
#define ASMARM_ARCH_KEYPAD_H
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
struct omap_kp_platform_data {
int rows;
@@ -37,6 +37,9 @@ struct omap_kp_platform_data {
#define KEY_PERSISTENT 0x00800000
#define KEYNUM_MASK 0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+ KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4b601270730..94584f167a8 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
nent = 1; /* for the next L1 entry */
} else {
bytes = IOPGD_SIZE;
- if (*iopgd & IOPGD_SUPER) {
+ if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
nent *= 16;
/* rewind to the 1st entry */
iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 6b0a2b6fed6..0974c0ecc59 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -527,7 +527,7 @@ static void do_signal(void)
no_signal:
/* Did we come from a system call? */
- if (__frame->syscallno >= 0) {
+ if (__frame->syscallno != -1) {
/* Restart the system call - no handlers present */
switch (__frame->gr8) {
case -ERESTARTNOHAND:
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index 0f6ec455a2b..03c0683636b 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -53,6 +53,9 @@ SECTIONS
/DISCARD/ : { *(.note*) }
+ /*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT(_end <= 0x8000, "Setup too big!");
. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
/* Necessary for the very-old-loader check to work... */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 25a92842dd9..d823c245f63 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -143,6 +143,7 @@ extern unsigned long node_remap_size[];
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
+ | 1*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 04eb6c958b9..d1414af9855 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -19,6 +19,8 @@
#include <asm/types.h>
#include <asm/percpu.h>
#include <asm/uv/uv_mmrs.h>
+#include <asm/irq_vectors.h>
+#include <asm/io_apic.h>
/*
@@ -114,7 +116,7 @@
/*
* The largest possible NASID of a C or M brick (+ 2)
*/
-#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2)
+#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2)
struct uv_scir_s {
struct timer_list timer;
@@ -230,6 +232,20 @@ static inline unsigned long uv_gpa(void *v)
return uv_soc_phys_ram_to_gpa(__pa(v));
}
+/* gnode -> pnode */
+static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
+{
+ return gpa >> uv_hub_info->m_val;
+}
+
+/* gpa -> pnode */
+static inline int uv_gpa_to_pnode(unsigned long gpa)
+{
+ unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1;
+
+ return uv_gpa_to_gnode(gpa) & n_mask;
+}
+
/* pnode, offset --> socket virtual */
static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
{
@@ -421,9 +437,14 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
{
unsigned long val;
+ unsigned long dmode = dest_Fixed;
+
+ if (vector == NMI_VECTOR)
+ dmode = dest_NMI;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
+ (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
(vector << UVH_IPI_INT_VECTOR_SHFT);
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 7da00b799cd..060fff8f5c5 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -57,5 +57,8 @@ SECTIONS
*(.note*)
}
+ /*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
}
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index f5f5886a6b5..326c25477d3 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -352,14 +352,14 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
alias.v = uv_read_local_mmr(redir_addrs[i].alias);
- if (alias.s.base == 0) {
+ if (alias.s.enable && alias.s.base == 0) {
*size = (1UL << alias.s.m_alias);
redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
return;
}
}
- BUG();
+ *base = *size = 0;
}
enum map_type {map_wb, map_uc};
@@ -619,12 +619,12 @@ void __init uv_system_init(void)
uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
- uv_cpu_hub_info(cpu)->n_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = n_val;
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_cpu_hub_info(cpu)->pnode = pnode;
uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
- uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+ uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index b1598a9436d..721a77ca811 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1214,7 +1214,8 @@ static int __cpuinit mce_cap_init(void)
rdmsrl(MSR_IA32_MCG_CAP, cap);
b = cap & MCG_BANKCNT_MASK;
- printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+ if (!banks)
+ printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
if (b > MAX_NR_BANKS) {
printk(KERN_WARNING
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 503c1f2e883..1740c85e24b 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -23,8 +23,6 @@
static struct bau_control **uv_bau_table_bases __read_mostly;
static int uv_bau_retry_limit __read_mostly;
-/* position of pnode (which is nasid>>1): */
-static int uv_nshift __read_mostly;
/* base pnode in this partition */
static int uv_partition_base_pnode __read_mostly;
@@ -723,7 +721,7 @@ uv_activation_descriptor_init(int node, int pnode)
BUG_ON(!adp);
pa = uv_gpa(adp); /* need the real nasid*/
- n = pa >> uv_nshift;
+ n = uv_gpa_to_pnode(pa);
m = pa & uv_mmask;
uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
@@ -778,7 +776,7 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
* need the pnode of where the memory was really allocated
*/
pa = uv_gpa(pqp);
- pn = pa >> uv_nshift;
+ pn = uv_gpa_to_pnode(pa);
uv_write_global_mmr64(pnode,
UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
@@ -843,8 +841,7 @@ static int __init uv_bau_init(void)
GFP_KERNEL, cpu_to_node(cur_cpu));
uv_bau_retry_limit = 1;
- uv_nshift = uv_hub_info->n_val;
- uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+ uv_mmask = (1UL << uv_hub_info->m_val) - 1;
nblades = uv_num_possible_blades();
uv_bau_table_bases = (struct bau_control **)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 92929fb3f9f..3c68fe2d46c 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -305,6 +305,9 @@ SECTIONS
#ifdef CONFIG_X86_32
+/*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
"kernel image bigger than KERNEL_IMAGE_SIZE");
#else
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edda9ea7c62..bd112c8c7bc 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -949,7 +949,7 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- if (max_part > 0)
+ if (max_part > 0 && bdev)
ioctl_by_bdev(bdev, BLKRRPART, 0);
mutex_unlock(&lo->lo_ctl_mutex);
/*
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index ad41f19b8e3..12fdd3987a3 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -76,8 +76,11 @@ static void cpuidle_idle_call(void)
#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
- if (need_resched())
+ if (need_resched()) {
+ local_irq_enable();
return;
+ }
+
target_state = &dev->states[next_state];
/* enter the state and update stats */
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index d335086f4a2..77a9579d716 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1173,7 +1173,7 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci)
pci_read_config_word(pvt->branch_1, where,
&pvt->b1_mtr[slot_row]);
debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row,
- where, pvt->b0_mtr[slot_row]);
+ where, pvt->b1_mtr[slot_row]);
} else {
pvt->b1_mtr[slot_row] = 0;
}
@@ -1232,7 +1232,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
struct csrow_info *p_csrow;
int empty, channel_count;
int max_csrows;
- int mtr;
+ int mtr, mtr1;
int csrow_megs;
int channel;
int csrow;
@@ -1251,9 +1251,10 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
/* use branch 0 for the basis */
mtr = pvt->b0_mtr[csrow >> 1];
+ mtr1 = pvt->b1_mtr[csrow >> 1];
/* if no DIMMS on this row, continue */
- if (!MTR_DIMMS_PRESENT(mtr))
+ if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1))
continue;
/* FAKE OUT VALUES, FIXME */
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index b08b6d8e2dc..f99d10655ed 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -46,9 +46,10 @@
/* Limits for i5400 */
#define NUM_MTRS_PER_BRANCH 4
#define CHANNELS_PER_BRANCH 2
+#define MAX_DIMMS_PER_CHANNEL NUM_MTRS_PER_BRANCH
#define MAX_CHANNELS 4
-#define MAX_DIMMS (MAX_CHANNELS * 4) /* Up to 4 DIMM's per channel */
-#define MAX_CSROWS (MAX_DIMMS * 2) /* max possible csrows per channel */
+/* max possible csrows per channel */
+#define MAX_CSROWS (MAX_DIMMS_PER_CHANNEL)
/* Device 16,
* Function 0: System Address
@@ -331,7 +332,6 @@ static const struct i5400_dev_info i5400_devs[] = {
struct i5400_dimm_info {
int megabytes; /* size, 0 means not present */
- int dual_rank;
};
/* driver private data structure */
@@ -849,11 +849,9 @@ static int determine_mtr(struct i5400_pvt *pvt, int csrow, int channel)
int n;
/* There is one MTR for each slot pair of FB-DIMMs,
- Each slot may have one or two ranks (2 csrows),
Each slot pair may be at branch 0 or branch 1.
- So, csrow should be divided by eight
*/
- n = csrow >> 3;
+ n = csrow;
if (n >= NUM_MTRS_PER_BRANCH) {
debugf0("ERROR: trying to access an invalid csrow: %d\n",
@@ -905,25 +903,22 @@ static void handle_channel(struct i5400_pvt *pvt, int csrow, int channel,
amb_present_reg = determine_amb_present_reg(pvt, channel);
/* Determine if there is a DIMM present in this DIMM slot */
- if (amb_present_reg & (1 << (csrow >> 1))) {
- dinfo->dual_rank = MTR_DIMM_RANK(mtr);
-
- if (!((dinfo->dual_rank == 0) &&
- ((csrow & 0x1) == 0x1))) {
- /* Start with the number of bits for a Bank
- * on the DRAM */
- addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
- /* Add thenumber of ROW bits */
- addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
- /* add the number of COLUMN bits */
- addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
-
- addrBits += 6; /* add 64 bits per DIMM */
- addrBits -= 20; /* divide by 2^^20 */
- addrBits -= 3; /* 8 bits per bytes */
-
- dinfo->megabytes = 1 << addrBits;
- }
+ if (amb_present_reg & (1 << csrow)) {
+ /* Start with the number of bits for a Bank
+ * on the DRAM */
+ addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+ /* Add thenumber of ROW bits */
+ addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+ /* add the number of COLUMN bits */
+ addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+ /* add the number of RANK bits */
+ addrBits += MTR_DIMM_RANK(mtr);
+
+ addrBits += 6; /* add 64 bits per DIMM */
+ addrBits -= 20; /* divide by 2^^20 */
+ addrBits -= 3; /* 8 bits per bytes */
+
+ dinfo->megabytes = 1 << addrBits;
}
}
}
@@ -951,12 +946,12 @@ static void calculate_dimm_size(struct i5400_pvt *pvt)
return;
}
- /* Scan all the actual CSROWS (which is # of DIMMS * 2)
+ /* Scan all the actual CSROWS
* and calculate the information for each DIMM
* Start with the highest csrow first, to display it first
* and work toward the 0th csrow
*/
- max_csrows = pvt->maxdimmperch * 2;
+ max_csrows = pvt->maxdimmperch;
for (csrow = max_csrows - 1; csrow >= 0; csrow--) {
/* on an odd csrow, first output a 'boundary' marker,
@@ -1064,7 +1059,7 @@ static void i5400_get_mc_regs(struct mem_ctl_info *mci)
/* Get the set of MTR[0-3] regs by each branch */
for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) {
- int where = MTR0 + (slot_row * sizeof(u32));
+ int where = MTR0 + (slot_row * sizeof(u16));
/* Branch 0 set of MTR registers */
pci_read_config_word(pvt->branch_0, where,
@@ -1146,7 +1141,7 @@ static int i5400_init_csrows(struct mem_ctl_info *mci)
pvt = mci->pvt_info;
channel_count = pvt->maxch;
- max_csrows = pvt->maxdimmperch * 2;
+ max_csrows = pvt->maxdimmperch;
empty = 1; /* Assume NO memory */
@@ -1215,28 +1210,6 @@ static void i5400_enable_error_reporting(struct mem_ctl_info *mci)
}
/*
- * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels)
- *
- * ask the device how many channels are present and how many CSROWS
- * as well
- */
-static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev,
- int *num_dimms_per_channel,
- int *num_channels)
-{
- u8 value;
-
- /* Need to retrieve just how many channels and dimms per channel are
- * supported on this memory controller
- */
- pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
- *num_dimms_per_channel = (int)value * 2;
-
- pci_read_config_byte(pdev, MAXCH, &value);
- *num_channels = (int)value;
-}
-
-/*
* i5400_probe1 Probe for ONE instance of device to see if it is
* present.
* return:
@@ -1263,22 +1236,16 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
if (PCI_FUNC(pdev->devfn) != 0)
return -ENODEV;
- /* Ask the devices for the number of CSROWS and CHANNELS so
- * that we can calculate the memory resources, etc
- *
- * The Chipset will report what it can handle which will be greater
- * or equal to what the motherboard manufacturer will implement.
- *
- * As we don't have a motherboard identification routine to determine
+ /* As we don't have a motherboard identification routine to determine
* actual number of slots/dimms per channel, we thus utilize the
* resource as specified by the chipset. Thus, we might have
* have more DIMMs per channel than actually on the mobo, but this
* allows the driver to support upto the chipset max, without
* some fancy mobo determination.
*/
- i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
- &num_channels);
- num_csrows = num_dimms_per_channel * 2;
+ num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
+ num_channels = MAX_CHANNELS;
+ num_csrows = num_dimms_per_channel;
debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n",
__func__, num_channels, num_dimms_per_channel, num_csrows);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 157f6504f25..cf27402af97 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -26,7 +26,9 @@
#include "mpc85xx_edac.h"
static int edac_dev_idx;
+#ifdef CONFIG_PCI
static int edac_pci_idx;
+#endif
static int edac_mc_idx;
static u32 orig_ddr_err_disable;
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index afad1479214..49384a7c549 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -460,7 +460,8 @@ no_irqs:
return ret;
}
-static int __devexit gpio_twl4030_remove(struct platform_device *pdev)
+/* Cannot use __devexit as gpio_twl4030_probe() calls us */
+static int gpio_twl4030_remove(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
int status;
@@ -493,7 +494,7 @@ static struct platform_driver gpio_twl4030_driver = {
.driver.name = "twl4030_gpio",
.driver.owner = THIS_MODULE,
.probe = gpio_twl4030_probe,
- .remove = __devexit_p(gpio_twl4030_remove),
+ .remove = gpio_twl4030_remove,
};
static int __init gpio_twl4030_init(void)
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 2c2cb1ec94c..27d62574284 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -572,7 +572,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
/* Sample register contents every 1 sec */
if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
- if (data->type != sch5027) {
+ if (data->type == dme1737) {
data->vid = dme1737_read(data, DME1737_REG_VID) &
0x3f;
}
@@ -1621,9 +1621,6 @@ static struct attribute *dme1737_misc_attr[] = {
&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
- /* Misc */
- &dev_attr_vrm.attr,
- &dev_attr_cpu0_vid.attr,
NULL
};
@@ -1631,6 +1628,18 @@ static const struct attribute_group dme1737_misc_group = {
.attrs = dme1737_misc_attr,
};
+/* The following struct holds VID-related attributes. Their creation
+ depends on the chip type which is determined during module load. */
+static struct attribute *dme1737_vid_attr[] = {
+ &dev_attr_vrm.attr,
+ &dev_attr_cpu0_vid.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_vid_group = {
+ .attrs = dme1737_vid_attr,
+};
+
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
@@ -1902,6 +1911,9 @@ static void dme1737_remove_files(struct device *dev)
if (data->type != sch5027) {
sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
}
+ if (data->type == dme1737) {
+ sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
+ }
sysfs_remove_group(&dev->kobj, &dme1737_group);
@@ -1933,6 +1945,13 @@ static int dme1737_create_files(struct device *dev)
goto exit_remove;
}
+ /* Create VID-related sysfs attributes */
+ if ((data->type == dme1737) &&
+ (err = sysfs_create_group(&dev->kobj,
+ &dme1737_vid_group))) {
+ goto exit_remove;
+ }
+
/* Create fan sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
if (data->has_fan & (1 << ix)) {
@@ -2127,7 +2146,7 @@ static int dme1737_init_device(struct device *dev)
data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
/* Set VRM */
- if (data->type != sch5027) {
+ if (data->type == dme1737) {
data->vrm = vid_which_vrm();
}
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 2a7a85a6dc3..da1b1f9488a 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -819,7 +819,7 @@ static int watchdog_release(struct inode *inode, struct file *filp)
static ssize_t watchdog_write(struct file *filp, const char __user *buf,
size_t count, loff_t *offset)
{
- size_t ret;
+ int ret;
struct fschmd_data *data = filp->private_data;
if (count) {
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 6679854c85b..be475e844c2 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -197,11 +197,13 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
- AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
+ AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
@@ -214,6 +216,7 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
y_inverted),
AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
+ AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index ffeb2a10e1a..a3749cb0f18 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1028,12 +1028,11 @@ static int __init it87_find(unsigned short *address,
chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (chip_type != IT8705F_DEVID) {
+ if (sio_data->type != it87) {
int reg;
superio_select(GPIO);
- if ((chip_type == it8718) ||
- (chip_type == it8720))
+ if (sio_data->type == it8718 || sio_data->type == it8720)
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e832e975da6..a1c47ee95c0 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -795,7 +795,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
twl->client = i2c_new_dummy(client->adapter,
twl->address);
if (!twl->client) {
- dev_err(&twl->client->dev,
+ dev_err(&client->dev,
"can't attach client %d\n", i);
status = -ENOMEM;
goto fail;
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index d3015dfb913..ac056ea6b66 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -507,6 +507,8 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
{
int i, ret;
+ mutex_init(&wm831x->irq_lock);
+
if (!irq) {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
@@ -521,7 +523,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
}
wm831x->irq = irq;
- mutex_init(&wm831x->irq_lock);
INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
/* Mask the individual interrupt sources */
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4487cc09791..0aecaaebef3 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = {
static int __init omap_hsmmc_init(void)
{
/* Register the MMC driver */
- return platform_driver_register(&omap_hsmmc_driver);
+ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
}
static void __exit omap_hsmmc_cleanup(void)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index e1f7d0a78b9..14cec04c34f 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -42,6 +42,7 @@
#include <linux/log2.h>
#include <linux/kthread.h>
#include <linux/reboot.h>
+#include <linux/kernel.h>
#include "ubi.h"
/* Maximum length of the 'mtd=' parameter */
@@ -1257,7 +1258,7 @@ static int __init bytes_str_to_int(const char *str)
unsigned long result;
result = simple_strtoul(str, &endp, 0);
- if (str == endp || result < 0) {
+ if (str == endp || result >= INT_MAX) {
printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
str);
return -EINVAL;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index e7161adc419..90af61a2c3e 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -794,16 +794,15 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
* number.
*/
image_seq = be32_to_cpu(ech->image_seq);
- if (!si->image_seq_set) {
+ if (!ubi->image_seq && image_seq)
ubi->image_seq = image_seq;
- si->image_seq_set = 1;
- } else if (ubi->image_seq && ubi->image_seq != image_seq) {
+ if (ubi->image_seq && image_seq &&
+ ubi->image_seq != image_seq) {
ubi_err("bad image sequence number %d in PEB %d, "
"expected %d", image_seq, pnum, ubi->image_seq);
ubi_dbg_dump_ec_hdr(ech);
return -EINVAL;
}
-
}
/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index bab31695dac..ff179ad7ca5 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -103,7 +103,6 @@ struct ubi_scan_volume {
* @ec_sum: a temporary variable used when calculating @mean_ec
* @ec_count: a temporary variable used when calculating @mean_ec
* @corr_count: count of corrupted PEBs
- * @image_seq_set: indicates @ubi->image_seq is known
*
* This data structure contains the result of scanning and may be used by other
* UBI sub-systems to build final UBI data structures, further error-recovery
@@ -127,7 +126,6 @@ struct ubi_scan_info {
uint64_t ec_sum;
int ec_count;
int corr_count;
- int image_seq_set;
};
struct ubi_device;
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 4a110b7b267..6c4a4fc8363 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -1463,7 +1463,9 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t
return -ENOMEM;
}
tuple.DesiredTuple = code;
- tuple.Attributes = TUPLE_RETURN_COMMON;
+ tuple.Attributes = 0;
+ if (function == BIND_FN_ALL)
+ tuple.Attributes = TUPLE_RETURN_COMMON;
ret = pccard_get_first_tuple(s, function, &tuple);
if (ret != 0)
goto done;
@@ -1490,7 +1492,7 @@ EXPORT_SYMBOL(pccard_read_tuple);
======================================================================*/
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info)
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info)
{
tuple_t *tuple;
cisparse_t *p;
@@ -1515,30 +1517,30 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
count = reserved = 0;
tuple->DesiredTuple = RETURN_FIRST_TUPLE;
tuple->Attributes = TUPLE_RETURN_COMMON;
- ret = pccard_get_first_tuple(s, function, tuple);
+ ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple);
if (ret != 0)
goto done;
/* First tuple should be DEVICE; we should really have either that
or a CFTABLE_ENTRY of some sort */
if ((tuple->TupleCode == CISTPL_DEVICE) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
dev_ok++;
/* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2
tuple, for card identification. Certain old D-Link and Linksys
cards have only a broken VERS_2 tuple; hence the bogus test. */
- if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC))
+ if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC))
ident_ok++;
if (!dev_ok && !ident_ok)
goto done;
for (count = 1; count < MAX_TUPLES; count++) {
- ret = pccard_get_next_tuple(s, function, tuple);
+ ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple);
if (ret != 0)
break;
if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) ||
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 79615e6d540..1f4098f1354 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -197,8 +197,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
cisdata_t code, void *parse);
int pcmcia_replace_cis(struct pcmcia_socket *s,
const u8 *data, const size_t len);
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function,
- unsigned int *count);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count);
/* rsrc_mgr.c */
int pcmcia_validate_mem(struct pcmcia_socket *s);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 9f300d3cb12..f5b7079f13d 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -547,7 +547,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev)
if (!vers1)
return -ENOMEM;
- if (!pccard_read_tuple(p_dev->socket, p_dev->func,
+ if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL,
CISTPL_MANFID, &manf_id)) {
p_dev->manf_id = manf_id.manf;
p_dev->card_id = manf_id.card;
@@ -581,9 +581,9 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev)
kfree(devgeo);
}
- if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1,
+ if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1,
vers1)) {
- for (i=0; i < vers1->ns; i++) {
+ for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) {
char *tmp;
unsigned int length;
@@ -733,7 +733,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s)
return -EAGAIN; /* try again, but later... */
}
- ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains);
+ ret = pccard_validate_cis(s, &no_chains);
if (ret || !no_chains) {
ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index b906abe26ad..a4aacb830b8 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1053,8 +1053,8 @@ static int i365_set_io_map(u_short sock, struct pccard_io_map *io)
u_char map, ioctl;
debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed,
+ (unsigned long long)io->start, (unsigned long long)io->stop);
map = io->map;
if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
(io->stop < io->start)) return -EINVAL;
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index d1d89c4491a..7dfbee1dcd7 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -537,8 +537,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io)
u_char map;
debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#lx-%#lx)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
map = io->map;
return 0;
@@ -554,8 +555,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem)
pcc_socket_t *t = &socket[sock];
debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#lx, %#x)\n", sock, map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#llx, %#x)\n", sock, map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/*
* sanity check
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index a0655839c8d..c6524f99ccc 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -492,8 +492,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io)
u_char map;
debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
map = io->map;
return 0;
@@ -515,8 +516,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem)
#endif
debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#lx, %#x)\n", sock, map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#llx, %#x)\n", sock, map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/*
* sanity check
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index c69f2c4fe52..403559ba49d 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -975,8 +975,9 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
|| (io->stop > 0xffff) || (io->stop < io->start))
@@ -1055,8 +1056,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock,
pcmconf8xx_t *pcmcia = s->pcmcia;
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
if ((mem->map >= PCMCIA_MEM_WIN_NO)
// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
@@ -1107,8 +1109,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock,
}
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/* copy the struct and modify the copy */
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 32c44040c1e..30cf71d2ee2 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -881,7 +881,7 @@ static int ds_ioctl(struct inode * inode, struct file * file,
mutex_lock(&s->skt_mutex);
pcmcia_validate_mem(s);
mutex_unlock(&s->skt_mutex);
- ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains);
+ ret = pccard_validate_cis(s, &buf->cisinfo.Chains);
break;
case DS_SUSPEND_CARD:
ret = pcmcia_suspend_card(s);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 1c39d3438f2..70a33468bcd 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -641,6 +641,12 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev,
if ((ret = pci_enable_device(dev)))
goto err_out_free_mem;
+ if (!pci_resource_start(dev, 0)) {
+ printk(KERN_INFO "pd6729: refusing to load the driver "
+ "as the io_base is 0.\n");
+ goto err_out_free_mem;
+ }
+
printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge "
"at 0x%llx on irq %d\n",
(unsigned long long)pci_resource_start(dev, 0), dev->irq);
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9ca22c7aafb..7039f3cf5b7 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -206,6 +206,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
+ printk("\n");
dev_printk(KERN_ERR, &s->dev,
"do_io_probe: unable to kmalloc 256 bytes");
return;
@@ -275,7 +276,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res,
s->cis_mem.res = res;
s->cis_virt = ioremap(res->start, s->map_size);
if (s->cis_virt) {
- ret = pccard_validate_cis(s, BIND_FN_ALL, count);
+ ret = pccard_validate_cis(s, count);
/* invalidate mapping and CIS cache */
iounmap(s->cis_virt);
s->cis_virt = NULL;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 163cf98e238..ef7e9e58782 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -336,8 +336,9 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
unsigned short speed = map->speed;
- debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
- map->map, map->speed, map->start, map->stop);
+ debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n",
+ map->map, map->speed, (unsigned long long)map->start,
+ (unsigned long long)map->stop);
debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
(map->flags==0)?"<NONE>":"",
(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index ff9a3bb3c88..78d5aab542f 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -300,7 +300,7 @@ static ssize_t pccard_show_cis(struct kobject *kobj,
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- if (pccard_validate_cis(s, BIND_FN_ALL, &chains))
+ if (pccard_validate_cis(s, &chains))
return -EIO;
if (!chains)
return -ENODATA;
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 582413fcb62..6918849d511 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -732,8 +732,8 @@ static int tcic_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
u_short base, len, ioctl;
debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", psock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed,
+ (unsigned long long)io->start, (unsigned long long)io->stop);
if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
(io->stop < io->start)) return -EINVAL;
tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT));
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index e7108e75653..42e8550cd2b 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1561,11 +1561,16 @@ enum pci_board_num_t {
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
+ pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
+ pbn_ADDIDATA_PCIe_1_3906250,
+ pbn_ADDIDATA_PCIe_2_3906250,
+ pbn_ADDIDATA_PCIe_4_3906250,
+ pbn_ADDIDATA_PCIe_8_3906250,
};
/*
@@ -2146,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.base_baud = 921600,
.uart_offset = 0x200,
},
+ [pbn_exar_ibm_saturn] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+
/*
* PA Semi PWRficient PA6T-1682M on-chip UART
*/
@@ -2185,6 +2197,37 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.uart_offset = 0x10,
.first_offset = 0x800,
},
+ /*
+ * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
+ */
+ [pbn_ADDIDATA_PCIe_1_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_2_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_4_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_8_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
@@ -2649,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
+ 0, 0, pbn_exar_ibm_saturn },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -3556,6 +3602,38 @@ static struct pci_device_id serial_pci_tbl[] = {
0,
pbn_b0_8_115200 },
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_4_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_2_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_1_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_8_3906250 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3551c5cb709..9d948bccafa 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
void *data;
int ret;
- BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+ BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
port = &atmel_ports[pdev->id];
port->backup_imr = 0;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 33351312327..a18e3c5dd82 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -223,6 +223,7 @@ config USB_OTG
config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+ select USB_OTG_UTILS
help
Intel's PXA 25x series XScale ARM-5TE processors include
an integrated full speed USB 1.1 device controller. The
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 9b9d6395bad..052f214ea6f 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -58,6 +58,11 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke
}
unlock_new_inode(tree->inode);
+ if (!HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n");
+ goto free_inode;
+ }
+
mapping = tree->inode->i_mapping;
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 175d08eacc8..bed78ac8f6d 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -99,6 +99,10 @@ int hfsplus_read_wrapper(struct super_block *sb)
if (hfsplus_get_last_session(sb, &part_start, &part_size))
return -EINVAL;
+ if ((u64)part_start + part_size > 0x100000000ULL) {
+ pr_err("hfs: volumes larger than 2TB are not supported yet\n");
+ return -EINVAL;
+ }
while (1) {
bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
if (!bh)
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index c7bff4f603f..a65239cfd97 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -99,7 +99,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
"VmallocUsed: %8lu kB\n"
"VmallocChunk: %8lu kB\n"
#ifdef CONFIG_MEMORY_FAILURE
- "HardwareCorrupted: %8lu kB\n"
+ "HardwareCorrupted: %5lu kB\n"
#endif
,
K(i.totalram),
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 4e4276b956e..5d1a3b98a6e 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -876,7 +876,6 @@ xfs_dqrele_inode(
ip->i_gdquot = NULL;
}
xfs_iput(ip, XFS_ILOCK_EXCL);
- IRELE(ip);
return 0;
}
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 44717eb4763..79a2340d83c 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -291,8 +291,15 @@ struct global_attr {
int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
int cpufreq_update_policy(unsigned int cpu);
+#ifdef CONFIG_CPU_FREQ
/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
unsigned int cpufreq_get(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_get(unsigned int cpu)
+{
+ return 0;
+}
+#endif
/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
#ifdef CONFIG_CPU_FREQ
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 86257a41273..b0f0f3851cd 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -482,6 +482,9 @@
#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
+#define PCI_SUBVENDOR_ID_IBM 0x1014
+#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4
+
#define PCI_VENDOR_ID_UNISYS 0x1018
#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
@@ -2160,6 +2163,10 @@
#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D
#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E
#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013
#define PCI_VENDOR_ID_PDC 0x15e9
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 931150566ad..a3baeb2c216 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -88,6 +88,18 @@
#define PR_TASK_PERF_EVENTS_DISABLE 31
#define PR_TASK_PERF_EVENTS_ENABLE 32
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
#define PR_MCE_KILL 33
+# define PR_MCE_KILL_CLEAR 0
+# define PR_MCE_KILL_SET 1
+
+# define PR_MCE_KILL_LATE 0
+# define PR_MCE_KILL_EARLY 1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 46e9ab3ee6e..9642c6bcb39 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -76,11 +76,7 @@ static inline void __rcu_read_unlock_bh(void)
extern void call_rcu_sched(struct rcu_head *head,
void (*func)(struct rcu_head *rcu));
-
-static inline void synchronize_rcu_expedited(void)
-{
- synchronize_sched_expedited();
-}
+extern void synchronize_rcu_expedited(void);
static inline void synchronize_rcu_bh_expedited(void)
{
diff --git a/include/linux/string.h b/include/linux/string.h
index 489019ef169..b8508868d5a 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -62,7 +62,7 @@ extern char * strnchr(const char *, size_t, int);
#ifndef __HAVE_ARCH_STRRCHR
extern char * strrchr(const char *,int);
#endif
-extern char * strstrip(char *);
+extern char * __must_check strstrip(char *);
#ifndef __HAVE_ARCH_STRSTR
extern char * strstr(const char *,const char *);
#endif
diff --git a/include/linux/topology.h b/include/linux/topology.h
index fc0bf3edeb6..57e63579bfd 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -129,7 +129,7 @@ int arch_update_cpu_topology(void);
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
@@ -162,7 +162,7 @@ int arch_update_cpu_topology(void);
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index ca83b73fba1..0249f4be9b5 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1710,14 +1710,13 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
return -EFAULT;
buffer[nbytes] = 0; /* nul-terminate */
- strstrip(buffer);
if (cft->write_u64) {
- u64 val = simple_strtoull(buffer, &end, 0);
+ u64 val = simple_strtoull(strstrip(buffer), &end, 0);
if (*end)
return -EINVAL;
retval = cft->write_u64(cgrp, cft, val);
} else {
- s64 val = simple_strtoll(buffer, &end, 0);
+ s64 val = simple_strtoll(strstrip(buffer), &end, 0);
if (*end)
return -EINVAL;
retval = cft->write_s64(cgrp, cft, val);
@@ -1753,8 +1752,7 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
}
buffer[nbytes] = 0; /* nul-terminate */
- strstrip(buffer);
- retval = cft->write_string(cgrp, cft, buffer);
+ retval = cft->write_string(cgrp, cft, strstrip(buffer));
if (!retval)
retval = nbytes;
out:
diff --git a/kernel/exit.c b/kernel/exit.c
index e61891f8012..f7864ac2ecc 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -359,10 +359,8 @@ void __set_special_pids(struct pid *pid)
{
struct task_struct *curr = current->group_leader;
- if (task_session(curr) != pid) {
+ if (task_session(curr) != pid)
change_pid(curr, PIDTYPE_SID, pid);
- proc_sid_connector(curr);
- }
if (task_pgrp(curr) != pid)
change_pid(curr, PIDTYPE_PGID, pid);
diff --git a/kernel/futex.c b/kernel/futex.c
index 4949d336d88..642f3bbaacc 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -150,7 +150,8 @@ static struct futex_hash_bucket *hash_futex(union futex_key *key)
*/
static inline int match_futex(union futex_key *key1, union futex_key *key2)
{
- return (key1->both.word == key2->both.word
+ return (key1 && key2
+ && key1->both.word == key2->both.word
&& key1->both.ptr == key2->both.ptr
&& key1->both.offset == key2->both.offset);
}
@@ -1028,7 +1029,6 @@ static inline
void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
struct futex_hash_bucket *hb)
{
- drop_futex_key_refs(&q->key);
get_futex_key_refs(key);
q->key = *key;
@@ -1226,6 +1226,7 @@ retry_private:
*/
if (ret == 1) {
WARN_ON(pi_state);
+ drop_count++;
task_count++;
ret = get_futex_value_locked(&curval2, uaddr2);
if (!ret)
@@ -1304,6 +1305,7 @@ retry_private:
if (ret == 1) {
/* We got the lock. */
requeue_pi_wake_futex(this, &key2, hb2);
+ drop_count++;
continue;
} else if (ret) {
/* -EDEADLK */
@@ -1791,6 +1793,7 @@ static int futex_wait(u32 __user *uaddr, int fshared,
current->timer_slack_ns);
}
+retry:
/* Prepare to wait on uaddr. */
ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
if (ret)
@@ -1808,9 +1811,14 @@ static int futex_wait(u32 __user *uaddr, int fshared,
goto out_put_key;
/*
- * We expect signal_pending(current), but another thread may
- * have handled it for us already.
+ * We expect signal_pending(current), but we might be the
+ * victim of a spurious wakeup as well.
*/
+ if (!signal_pending(current)) {
+ put_futex_key(fshared, &q.key);
+ goto retry;
+ }
+
ret = -ERESTARTSYS;
if (!abs_time)
goto out_put_key;
@@ -2118,9 +2126,11 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
*/
plist_del(&q->list, &q->list.plist);
+ /* Handle spurious wakeups gracefully */
+ ret = -EAGAIN;
if (timeout && !timeout->task)
ret = -ETIMEDOUT;
- else
+ else if (signal_pending(current))
ret = -ERESTARTNOINTR;
}
return ret;
@@ -2198,6 +2208,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
debug_rt_mutex_init_waiter(&rt_waiter);
rt_waiter.task = NULL;
+retry:
key2 = FUTEX_KEY_INIT;
ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
@@ -2292,6 +2303,9 @@ out_put_keys:
out_key2:
put_futex_key(fshared, &key2);
+ /* Spurious wakeup ? */
+ if (ret == -EAGAIN)
+ goto retry;
out:
if (to) {
hrtimer_cancel(&to->timer);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 9d0b5c66588..afb7ef3dbc4 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -1355,7 +1355,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx)
u64 interrupts, freq;
spin_lock(&ctx->lock);
- list_for_each_entry(event, &ctx->group_list, group_entry) {
+ list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->state != PERF_EVENT_STATE_ACTIVE)
continue;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 705f02ac743..0536125b049 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -913,7 +913,20 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
spin_unlock(&rnp->lock); /* irqs remain disabled. */
break;
}
- rcu_preempt_offline_tasks(rsp, rnp, rdp);
+
+ /*
+ * If there was a task blocking the current grace period,
+ * and if all CPUs have checked in, we need to propagate
+ * the quiescent state up the rcu_node hierarchy. But that
+ * is inconvenient at the moment due to deadlock issues if
+ * this should end the current grace period. So set the
+ * offlined CPU's bit in ->qsmask in order to force the
+ * next force_quiescent_state() invocation to clean up this
+ * mess in a deadlock-free manner.
+ */
+ if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask)
+ rnp->qsmask |= mask;
+
mask = rnp->grpmask;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
rnp = rnp->parent;
@@ -958,7 +971,7 @@ static void rcu_offline_cpu(int cpu)
* Invoke any RCU callbacks that have made it to the end of their grace
* period. Thottle as specified by rdp->blimit.
*/
-static void rcu_do_batch(struct rcu_data *rdp)
+static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
{
unsigned long flags;
struct rcu_head *next, *list, **tail;
@@ -1011,6 +1024,13 @@ static void rcu_do_batch(struct rcu_data *rdp)
if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark)
rdp->blimit = blimit;
+ /* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
+ if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) {
+ rdp->qlen_last_fqs_check = 0;
+ rdp->n_force_qs_snap = rsp->n_force_qs;
+ } else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark)
+ rdp->qlen_last_fqs_check = rdp->qlen;
+
local_irq_restore(flags);
/* Re-raise the RCU softirq if there are callbacks remaining. */
@@ -1224,7 +1244,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
}
/* If there are callbacks ready, invoke them. */
- rcu_do_batch(rdp);
+ rcu_do_batch(rsp, rdp);
}
/*
@@ -1288,10 +1308,20 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */
}
- /* Force the grace period if too many callbacks or too long waiting. */
- if (unlikely(++rdp->qlen > qhimark)) {
+ /*
+ * Force the grace period if too many callbacks or too long waiting.
+ * Enforce hysteresis, and don't invoke force_quiescent_state()
+ * if some other CPU has recently done so. Also, don't bother
+ * invoking force_quiescent_state() if the newly enqueued callback
+ * is the only one waiting for a grace period to complete.
+ */
+ if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
rdp->blimit = LONG_MAX;
- force_quiescent_state(rsp, 0);
+ if (rsp->n_force_qs == rdp->n_force_qs_snap &&
+ *rdp->nxttail[RCU_DONE_TAIL] != head)
+ force_quiescent_state(rsp, 0);
+ rdp->n_force_qs_snap = rsp->n_force_qs;
+ rdp->qlen_last_fqs_check = rdp->qlen;
} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
local_irq_restore(flags);
@@ -1523,6 +1553,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
rdp->beenonline = 1; /* We have now been online. */
rdp->preemptable = preemptable;
rdp->passed_quiesc_completed = lastcomp - 1;
+ rdp->qlen_last_fqs_check = 0;
+ rdp->n_force_qs_snap = rsp->n_force_qs;
rdp->blimit = blimit;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index b40ac570604..1823c6e2060 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -167,6 +167,10 @@ struct rcu_data {
struct rcu_head *nxtlist;
struct rcu_head **nxttail[RCU_NEXT_SIZE];
long qlen; /* # of queued callbacks */
+ long qlen_last_fqs_check;
+ /* qlen at last check for QS forcing */
+ unsigned long n_force_qs_snap;
+ /* did other CPU force QS recently? */
long blimit; /* Upper limit on a processed batch */
#ifdef CONFIG_NO_HZ
@@ -302,9 +306,9 @@ static void rcu_print_task_stall(struct rcu_node *rnp);
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp);
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp);
static void rcu_preempt_offline_cpu(int cpu);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_preempt_check_callbacks(int cpu);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index c0cb783aa16..ef2a58c2b9d 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -304,21 +304,25 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
* parent is to remove the need for rcu_read_unlock_special() to
* make more than two attempts to acquire the target rcu_node's lock.
*
+ * Returns 1 if there was previously a task blocking the current grace
+ * period on the specified rcu_node structure.
+ *
* The caller must hold rnp->lock with irqs disabled.
*/
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp)
{
int i;
struct list_head *lp;
struct list_head *lp_root;
+ int retval = rcu_preempted_readers(rnp);
struct rcu_node *rnp_root = rcu_get_root(rsp);
struct task_struct *tp;
if (rnp == rnp_root) {
WARN_ONCE(1, "Last CPU thought to be offlined?");
- return; /* Shouldn't happen: at least one CPU online. */
+ return 0; /* Shouldn't happen: at least one CPU online. */
}
WARN_ON_ONCE(rnp != rdp->mynode &&
(!list_empty(&rnp->blocked_tasks[0]) ||
@@ -342,6 +346,8 @@ static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
spin_unlock(&rnp_root->lock); /* irqs remain disabled */
}
}
+
+ return retval;
}
/*
@@ -393,6 +399,17 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
EXPORT_SYMBOL_GPL(call_rcu);
/*
+ * Wait for an rcu-preempt grace period. We are supposed to expedite the
+ * grace period, but this is the crude slow compatability hack, so just
+ * invoke synchronize_rcu().
+ */
+void synchronize_rcu_expedited(void)
+{
+ synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
+/*
* Check to see if there is any immediate preemptable-RCU-related work
* to be done.
*/
@@ -521,12 +538,15 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
/*
* Because preemptable RCU does not exist, it never needs to migrate
- * tasks that were blocked within RCU read-side critical sections.
+ * tasks that were blocked within RCU read-side critical sections, and
+ * such non-existent tasks cannot possibly have been blocking the current
+ * grace period.
*/
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp)
{
+ return 0;
}
/*
@@ -565,6 +585,16 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
EXPORT_SYMBOL_GPL(call_rcu);
/*
+ * Wait for an rcu-preempt grace period, but make it happen quickly.
+ * But because preemptable RCU does not exist, map to rcu-sched.
+ */
+void synchronize_rcu_expedited(void)
+{
+ synchronize_sched_expedited();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
+/*
* Because preemptable RCU does not exist, it never has any work to do.
*/
static int rcu_preempt_pending(int cpu)
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 4e777b47eed..c32c3e643da 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -861,12 +861,21 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se);
static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq)
{
struct sched_entity *se = __pick_next_entity(cfs_rq);
+ struct sched_entity *buddy;
- if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1)
- return cfs_rq->next;
+ if (cfs_rq->next) {
+ buddy = cfs_rq->next;
+ cfs_rq->next = NULL;
+ if (wakeup_preempt_entity(buddy, se) < 1)
+ return buddy;
+ }
- if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1)
- return cfs_rq->last;
+ if (cfs_rq->last) {
+ buddy = cfs_rq->last;
+ cfs_rq->last = NULL;
+ if (wakeup_preempt_entity(buddy, se) < 1)
+ return buddy;
+ }
return se;
}
@@ -1654,16 +1663,6 @@ static struct task_struct *pick_next_task_fair(struct rq *rq)
do {
se = pick_next_entity(cfs_rq);
- /*
- * If se was a buddy, clear it so that it will have to earn
- * the favour again.
- *
- * If se was not a buddy, clear the buddies because neither
- * was elegible to run, let them earn it again.
- *
- * IOW. unconditionally clear buddies.
- */
- __clear_buddies(cfs_rq, NULL);
set_next_entity(cfs_rq, se);
cfs_rq = group_cfs_rq(se);
} while (cfs_rq);
diff --git a/kernel/sys.c b/kernel/sys.c
index 255475d163e..ce17760d9c5 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1110,6 +1110,8 @@ SYSCALL_DEFINE0(setsid)
err = session;
out:
write_unlock_irq(&tasklist_lock);
+ if (err > 0)
+ proc_sid_connector(group_leader);
return err;
}
@@ -1546,24 +1548,37 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
if (arg4 | arg5)
return -EINVAL;
switch (arg2) {
- case 0:
+ case PR_MCE_KILL_CLEAR:
if (arg3 != 0)
return -EINVAL;
current->flags &= ~PF_MCE_PROCESS;
break;
- case 1:
+ case PR_MCE_KILL_SET:
current->flags |= PF_MCE_PROCESS;
- if (arg3 != 0)
+ if (arg3 == PR_MCE_KILL_EARLY)
current->flags |= PF_MCE_EARLY;
- else
+ else if (arg3 == PR_MCE_KILL_LATE)
current->flags &= ~PF_MCE_EARLY;
+ else if (arg3 == PR_MCE_KILL_DEFAULT)
+ current->flags &=
+ ~(PF_MCE_EARLY|PF_MCE_PROCESS);
+ else
+ return -EINVAL;
break;
default:
return -EINVAL;
}
error = 0;
break;
-
+ case PR_MCE_KILL_GET:
+ if (arg2 | arg3 | arg4 | arg5)
+ return -EINVAL;
+ if (current->flags & PF_MCE_PROCESS)
+ error = (current->flags & PF_MCE_EARLY) ?
+ PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
+ else
+ error = PR_MCE_KILL_DEFAULT;
+ break;
default:
error = -EINVAL;
break;
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index b38423ca711..b6e7aaea460 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -1521,7 +1521,7 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table)
if (!table->ctl_name && table->strategy)
set_fail(&fail, table, "Strategy without ctl_name");
#endif
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
if (table->procname && !table->proc_handler)
set_fail(&fail, table, "No proc_handler");
#endif
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 47cdd7e76f2..12328147132 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -685,21 +685,38 @@ EXPORT_SYMBOL(schedule_delayed_work_on);
int schedule_on_each_cpu(work_func_t func)
{
int cpu;
+ int orig = -1;
struct work_struct *works;
works = alloc_percpu(struct work_struct);
if (!works)
return -ENOMEM;
+ /*
+ * when running in keventd don't schedule a work item on itself.
+ * Can just call directly because the work queue is already bound.
+ * This also is faster.
+ * Make this a generic parameter for other workqueues?
+ */
+ if (current_is_keventd()) {
+ orig = raw_smp_processor_id();
+ INIT_WORK(per_cpu_ptr(works, orig), func);
+ func(per_cpu_ptr(works, orig));
+ }
+
get_online_cpus();
for_each_online_cpu(cpu) {
struct work_struct *work = per_cpu_ptr(works, cpu);
+ if (cpu == orig)
+ continue;
INIT_WORK(work, func);
schedule_work_on(cpu, work);
}
- for_each_online_cpu(cpu)
- flush_work(per_cpu_ptr(works, cpu));
+ for_each_online_cpu(cpu) {
+ if (cpu != orig)
+ flush_work(per_cpu_ptr(works, cpu));
+ }
put_online_cpus();
free_percpu(works);
return 0;
diff --git a/mm/Kconfig b/mm/Kconfig
index 7ca3777bded..fd3386242cf 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -67,7 +67,7 @@ config DISCONTIGMEM
config SPARSEMEM
def_bool y
- depends on SPARSEMEM_MANUAL
+ depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
config FLATMEM
def_bool y
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 729d4b15b64..dacc6418387 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -35,6 +35,7 @@
#include <linux/mm.h>
#include <linux/page-flags.h>
#include <linux/sched.h>
+#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
@@ -370,9 +371,6 @@ static int me_pagecache_clean(struct page *p, unsigned long pfn)
int ret = FAILED;
struct address_space *mapping;
- if (!isolate_lru_page(p))
- page_cache_release(p);
-
/*
* For anonymous pages we're done the only reference left
* should be the one m_f() holds.
@@ -498,30 +496,18 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn)
*/
static int me_swapcache_dirty(struct page *p, unsigned long pfn)
{
- int ret = FAILED;
-
ClearPageDirty(p);
/* Trigger EIO in shmem: */
ClearPageUptodate(p);
- if (!isolate_lru_page(p)) {
- page_cache_release(p);
- ret = DELAYED;
- }
-
- return ret;
+ return DELAYED;
}
static int me_swapcache_clean(struct page *p, unsigned long pfn)
{
- int ret = FAILED;
-
- if (!isolate_lru_page(p)) {
- page_cache_release(p);
- ret = RECOVERED;
- }
delete_from_swap_cache(p);
- return ret;
+
+ return RECOVERED;
}
/*
@@ -611,8 +597,6 @@ static struct page_state {
{ 0, 0, "unknown page state", me_unknown },
};
-#undef lru
-
static void action_result(unsigned long pfn, char *msg, int result)
{
struct page *page = NULL;
@@ -629,13 +613,16 @@ static int page_action(struct page_state *ps, struct page *p,
unsigned long pfn, int ref)
{
int result;
+ int count;
result = ps->action(p, pfn);
action_result(pfn, ps->msg, result);
- if (page_count(p) != 1 + ref)
+
+ count = page_count(p) - 1 - ref;
+ if (count != 0)
printk(KERN_ERR
"MCE %#lx: %s page still referenced by %d users\n",
- pfn, ps->msg, page_count(p) - 1);
+ pfn, ps->msg, count);
/* Could do more checks here if page looks ok */
/*
@@ -661,12 +648,9 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn,
int i;
int kill = 1;
- if (PageReserved(p) || PageCompound(p) || PageSlab(p))
+ if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p))
return;
- if (!PageLRU(p))
- lru_add_drain_all();
-
/*
* This check implies we don't kill processes if their pages
* are in the swap cache early. Those are always late kills.
@@ -738,6 +722,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn,
int __memory_failure(unsigned long pfn, int trapno, int ref)
{
+ unsigned long lru_flag;
struct page_state *ps;
struct page *p;
int res;
@@ -775,6 +760,24 @@ int __memory_failure(unsigned long pfn, int trapno, int ref)
}
/*
+ * We ignore non-LRU pages for good reasons.
+ * - PG_locked is only well defined for LRU pages and a few others
+ * - to avoid races with __set_page_locked()
+ * - to avoid races with __SetPageSlab*() (and more non-atomic ops)
+ * The check (unnecessarily) ignores LRU pages being isolated and
+ * walked by the page reclaim code, however that's not a big loss.
+ */
+ if (!PageLRU(p))
+ lru_add_drain_all();
+ lru_flag = p->flags & lru;
+ if (isolate_lru_page(p)) {
+ action_result(pfn, "non LRU", IGNORED);
+ put_page(p);
+ return -EBUSY;
+ }
+ page_cache_release(p);
+
+ /*
* Lock the page and wait for writeback to finish.
* It's very difficult to mess with pages currently under IO
* and in many cases impossible, so we just avoid it here.
@@ -790,7 +793,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref)
/*
* Torn down by someone else?
*/
- if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) {
+ if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) {
action_result(pfn, "already truncated LRU", IGNORED);
res = 0;
goto out;
@@ -798,7 +801,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref)
res = -EBUSY;
for (ps = error_states;; ps++) {
- if ((p->flags & ps->mask) == ps->res) {
+ if (((p->flags | lru_flag)& ps->mask) == ps->res) {
res = page_action(ps, p, pfn, ref);
break;
}
diff --git a/mm/memory.c b/mm/memory.c
index 7e91b5f9f69..6ab19dd4a19 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -641,6 +641,7 @@ static int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma,
unsigned long addr, unsigned long end)
{
+ pte_t *orig_src_pte, *orig_dst_pte;
pte_t *src_pte, *dst_pte;
spinlock_t *src_ptl, *dst_ptl;
int progress = 0;
@@ -654,6 +655,8 @@ again:
src_pte = pte_offset_map_nested(src_pmd, addr);
src_ptl = pte_lockptr(src_mm, src_pmd);
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
+ orig_src_pte = src_pte;
+ orig_dst_pte = dst_pte;
arch_enter_lazy_mmu_mode();
do {
@@ -677,9 +680,9 @@ again:
arch_leave_lazy_mmu_mode();
spin_unlock(src_ptl);
- pte_unmap_nested(src_pte - 1);
+ pte_unmap_nested(orig_src_pte);
add_mm_rss(dst_mm, rss[0], rss[1]);
- pte_unmap_unlock(dst_pte - 1, dst_ptl);
+ pte_unmap_unlock(orig_dst_pte, dst_ptl);
cond_resched();
if (addr != end)
goto again;
@@ -1820,10 +1823,10 @@ static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd,
token = pmd_pgtable(*pmd);
do {
- err = fn(pte, token, addr, data);
+ err = fn(pte++, token, addr, data);
if (err)
break;
- } while (pte++, addr += PAGE_SIZE, addr != end);
+ } while (addr += PAGE_SIZE, addr != end);
arch_leave_lazy_mmu_mode();
@@ -2539,7 +2542,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
} else if (PageHWPoison(page)) {
ret = VM_FAULT_HWPOISON;
delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
- goto out;
+ goto out_release;
}
lock_page(page);
@@ -2611,6 +2614,7 @@ out_nomap:
pte_unmap_unlock(page_table, ptl);
out_page:
unlock_page(page);
+out_release:
page_cache_release(page);
return ret;
}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 7dd9d9f8069..4545d594424 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1024,7 +1024,7 @@ static long do_mbind(unsigned long start, unsigned long len,
err = migrate_prep();
if (err)
- return err;
+ goto mpol_out;
}
{
NODEMASK_SCRATCH(scratch);
@@ -1039,10 +1039,9 @@ static long do_mbind(unsigned long start, unsigned long len,
err = -ENOMEM;
NODEMASK_SCRATCH_FREE(scratch);
}
- if (err) {
- mpol_put(new);
- return err;
- }
+ if (err)
+ goto mpol_out;
+
vma = check_range(mm, start, end, nmask,
flags | MPOL_MF_INVERT, &pagelist);
@@ -1058,9 +1057,11 @@ static long do_mbind(unsigned long start, unsigned long len,
if (!err && nr_failed && (flags & MPOL_MF_STRICT))
err = -EIO;
- }
+ } else
+ putback_lru_pages(&pagelist);
up_write(&mm->mmap_sem);
+ mpol_out:
mpol_put(new);
return err;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index bf720550b44..cdcedf66161 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2183,7 +2183,7 @@ void show_free_areas(void)
printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n"
" active_file:%lu inactive_file:%lu isolated_file:%lu\n"
" unevictable:%lu"
- " dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n"
+ " dirty:%lu writeback:%lu unstable:%lu\n"
" free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n"
" mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n",
global_page_state(NR_ACTIVE_ANON),
@@ -2196,7 +2196,6 @@ void show_free_areas(void)
global_page_state(NR_FILE_DIRTY),
global_page_state(NR_WRITEBACK),
global_page_state(NR_UNSTABLE_NFS),
- nr_blockdev_pages(),
global_page_state(NR_FREE_PAGES),
global_page_state(NR_SLAB_RECLAIMABLE),
global_page_state(NR_SLAB_UNRECLAIMABLE),
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 64e43889883..777af57fd8c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -544,6 +544,16 @@ redo:
*/
lru = LRU_UNEVICTABLE;
add_page_to_unevictable_list(page);
+ /*
+ * When racing with an mlock clearing (page is
+ * unlocked), make sure that if the other thread does
+ * not observe our setting of PG_lru and fails
+ * isolation, we see PG_mlocked cleared below and move
+ * the page back to the evictable list.
+ *
+ * The other side is TestClearPageMlocked().
+ */
+ smp_mb();
}
/*
@@ -1088,7 +1098,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
int lumpy_reclaim = 0;
while (unlikely(too_many_isolated(zone, file, sc))) {
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/* We are about to die and free our memory. Return now. */
if (fatal_signal_pending(current))
@@ -1356,7 +1366,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
* IO, plus JVM can create lots of anon VM_EXEC pages,
* so we ignore them here.
*/
- if ((vm_flags & VM_EXEC) && !PageAnon(page)) {
+ if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
list_add(&page->lru, &l_active);
continue;
}
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 87bbb8bce9b..bc4114f1ab3 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2,7 +2,7 @@
# (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
# (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
# (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
-# (c) 2008, Andy Whitcroft <apw@canonical.com>
+# (c) 2008,2009, Andy Whitcroft <apw@canonical.com>
# Licensed under the terms of the GNU GPL License version 2
use strict;
@@ -10,7 +10,7 @@ use strict;
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.29';
+my $V = '0.30';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -130,7 +130,10 @@ if ($tree) {
my $emitted_corrupt = 0;
-our $Ident = qr{[A-Za-z_][A-Za-z\d_]*};
+our $Ident = qr{
+ [A-Za-z_][A-Za-z\d_]*
+ (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)*
+ }x;
our $Storage = qr{extern|static|asmlinkage};
our $Sparse = qr{
__user|
@@ -997,23 +1000,25 @@ sub annotate_values {
sub possible {
my ($possible, $line) = @_;
-
- print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
- if ($possible !~ /(?:
+ my $notPermitted = qr{(?:
^(?:
$Modifier|
$Storage|
$Type|
- DEFINE_\S+|
+ DEFINE_\S+
+ )$|
+ ^(?:
goto|
return|
case|
else|
asm|__asm__|
do
- )$|
+ )(?:\s|$)|
^(?:typedef|struct|enum)\b
- )/x) {
+ )}x;
+ warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
+ if ($possible !~ $notPermitted) {
# Check for modifiers.
$possible =~ s/\s*$Storage\s*//g;
$possible =~ s/\s*$Sparse\s*//g;
@@ -1022,8 +1027,10 @@ sub possible {
} elsif ($possible =~ /\s/) {
$possible =~ s/\s*$Type\s*//g;
for my $modifier (split(' ', $possible)) {
- warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
- push(@modifierList, $modifier);
+ if ($modifier !~ $notPermitted) {
+ warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+ push(@modifierList, $modifier);
+ }
}
} else {
@@ -1138,6 +1145,7 @@ sub process {
# suppression flags
my %suppress_ifbraces;
my %suppress_whiletrailers;
+ my %suppress_export;
# Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
@@ -1230,7 +1238,6 @@ sub process {
$linenr++;
my $rawline = $rawlines[$linenr - 1];
- my $hunk_line = ($realcnt != 0);
#extract the line range in the file after the patch is applied
if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
@@ -1247,6 +1254,7 @@ sub process {
%suppress_ifbraces = ();
%suppress_whiletrailers = ();
+ %suppress_export = ();
next;
# track the line number as we move through the hunk, note that
@@ -1270,6 +1278,8 @@ sub process {
$realcnt--;
}
+ my $hunk_line = ($realcnt != 0);
+
#make up the handle for any error we report on this line
$prefix = "$filename:$realline: " if ($emacs && $file);
$prefix = "$filename:$linenr: " if ($emacs && !$file);
@@ -1420,13 +1430,22 @@ sub process {
}
# Check for potential 'bare' types
- my ($stat, $cond, $line_nr_next, $remain_next, $off_next);
+ my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
+ $realline_next);
if ($realcnt && $line =~ /.\s*\S/) {
($stat, $cond, $line_nr_next, $remain_next, $off_next) =
ctx_statement_block($linenr, $realcnt, 0);
$stat =~ s/\n./\n /g;
$cond =~ s/\n./\n /g;
+ # Find the real next line.
+ $realline_next = $line_nr_next;
+ if (defined $realline_next &&
+ (!defined $lines[$realline_next - 1] ||
+ substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) {
+ $realline_next++;
+ }
+
my $s = $stat;
$s =~ s/{.*$//s;
@@ -1661,8 +1680,8 @@ sub process {
}
# check for initialisation to aggregates open brace on the next line
- if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
- $line =~ /^.\s*{/) {
+ if ($line =~ /^.\s*{/ &&
+ $prevline =~ /(?:^|[^=])=\s*$/) {
ERROR("that open brace { should be on the previous line\n" . $hereprev);
}
@@ -1687,21 +1706,40 @@ sub process {
$line =~ s@//.*@@;
$opline =~ s@//.*@@;
-#EXPORT_SYMBOL should immediately follow its function closing }.
- if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) ||
- ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider
+# the whole statement.
+#print "APW <$lines[$realline_next - 1]>\n";
+ if (defined $realline_next &&
+ exists $lines[$realline_next - 1] &&
+ !defined $suppress_export{$realline_next} &&
+ ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+ $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
my $name = $1;
- if ($prevline !~ /(?:
- ^.}|
+ if ($stat !~ /(?:
+ \n.}\s*$|
^.DEFINE_$Ident\(\Q$name\E\)|
^.DECLARE_$Ident\(\Q$name\E\)|
^.LIST_HEAD\(\Q$name\E\)|
- ^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
- \b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)
+ ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
+ \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\()
)/x) {
- WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n";
+ $suppress_export{$realline_next} = 2;
+ } else {
+ $suppress_export{$realline_next} = 1;
}
}
+ if (!defined $suppress_export{$linenr} &&
+ $prevline =~ /^.\s*$/ &&
+ ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+ $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+#print "FOO B <$lines[$linenr - 1]>\n";
+ $suppress_export{$linenr} = 2;
+ }
+ if (defined $suppress_export{$linenr} &&
+ $suppress_export{$linenr} == 2) {
+ WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+ }
# check for external initialisers.
if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index cdb44b63342..102b76608f3 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
use strict;
my $P = $0;
-my $V = '0.20';
+my $V = '0.21';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -37,6 +37,7 @@ my $scm = 0;
my $web = 0;
my $subsystem = 0;
my $status = 0;
+my $keywords = 1;
my $from_filename = 0;
my $pattern_depth = 0;
my $version = 0;
@@ -84,6 +85,7 @@ if (!GetOptions(
'scm!' => \$scm,
'web!' => \$web,
'pattern-depth=i' => \$pattern_depth,
+ 'k|keywords!' => \$keywords,
'f|file' => \$from_filename,
'v|version' => \$version,
'h|help' => \$help,
@@ -132,6 +134,8 @@ if (!top_of_kernel_tree($lk_path)) {
## Read MAINTAINERS for type/value pairs
my @typevalue = ();
+my %keyword_hash;
+
open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n";
while (<MAINT>) {
my $line = $_;
@@ -149,6 +153,8 @@ while (<MAINT>) {
if ((-d $value)) {
$value =~ s@([^/])$@$1/@;
}
+ } elsif ($type eq "K") {
+ $keyword_hash{@typevalue} = $value;
}
push(@typevalue, "$type:$value");
} elsif (!/^(\s)*$/) {
@@ -188,6 +194,7 @@ if ($email_remove_duplicates) {
my @files = ();
my @range = ();
+my @keyword_tvi = ();
foreach my $file (@ARGV) {
##if $file is a directory and it lacks a trailing slash, add one
@@ -198,11 +205,24 @@ foreach my $file (@ARGV) {
}
if ($from_filename) {
push(@files, $file);
+ if (-f $file && $keywords) {
+ open(FILE, "<$file") or die "$P: Can't open ${file}\n";
+ while (<FILE>) {
+ my $patch_line = $_;
+ foreach my $line (keys %keyword_hash) {
+ if ($patch_line =~ m/^.*$keyword_hash{$line}/x) {
+ push(@keyword_tvi, $line);
+ }
+ }
+ }
+ close(FILE);
+ }
} else {
my $file_cnt = @files;
my $lastfile;
open(PATCH, "<$file") or die "$P: Can't open ${file}\n";
while (<PATCH>) {
+ my $patch_line = $_;
if (m/^\+\+\+\s+(\S+)/) {
my $filename = $1;
$filename =~ s@^[^/]*/@@;
@@ -213,6 +233,12 @@ foreach my $file (@ARGV) {
if ($email_git_blame) {
push(@range, "$lastfile:$1:$2");
}
+ } elsif ($keywords) {
+ foreach my $line (keys %keyword_hash) {
+ if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) {
+ push(@keyword_tvi, $line);
+ }
+ }
}
}
close(PATCH);
@@ -286,6 +312,13 @@ foreach my $file (@files) {
}
}
+if ($keywords) {
+ @keyword_tvi = sort_and_uniq(@keyword_tvi);
+ foreach my $line (@keyword_tvi) {
+ add_categories($line);
+ }
+}
+
if ($email) {
foreach my $chief (@penguin_chief) {
if ($chief =~ m/^(.*):(.*)/) {
@@ -384,6 +417,7 @@ Output type options:
Other options:
--pattern-depth => Number of pattern directory traversals (default: 0 (all))
+ --keywords => scan patch for keywords (default: 1 (on))
--version => show version
--help => show this help information
@@ -486,7 +520,6 @@ sub format_email {
}
sub find_starting_index {
-
my ($index) = @_;
while ($index > 0) {
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 702d8fe58fb..e8a510d935e 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -765,19 +765,40 @@ static void draw_wakeups(void)
if (c->Y && c->start_time <= we->time && c->end_time >= we->time) {
if (p->pid == we->waker) {
from = c->Y;
- task_from = c->comm;
+ task_from = strdup(c->comm);
}
if (p->pid == we->wakee) {
to = c->Y;
- task_to = c->comm;
+ task_to = strdup(c->comm);
}
}
c = c->next;
}
+ c = p->all;
+ while (c) {
+ if (p->pid == we->waker && !from) {
+ from = c->Y;
+ task_from = strdup(c->comm);
+ }
+ if (p->pid == we->wakee && !to) {
+ to = c->Y;
+ task_to = strdup(c->comm);
+ }
+ c = c->next;
+ }
}
p = p->next;
}
+ if (!task_from) {
+ task_from = malloc(40);
+ sprintf(task_from, "[%i]", we->waker);
+ }
+ if (!task_to) {
+ task_to = malloc(40);
+ sprintf(task_to, "[%i]", we->wakee);
+ }
+
if (we->waker == -1)
svg_interrupt(we->time, to);
else if (from && to && abs(from - to) == 1)
@@ -785,6 +806,9 @@ static void draw_wakeups(void)
else
svg_partial_wakeline(we->time, from, task_from, to, task_to);
we = we->next;
+
+ free(task_from);
+ free(task_to);
}
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 37512e93623..a1b1d10912d 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -686,6 +686,8 @@ static void handle_keypress(int c)
switch (c) {
case 'd':
prompt_integer(&delay_secs, "Enter display delay");
+ if (delay_secs < 1)
+ delay_secs = 1;
break;
case 'e':
prompt_integer(&print_entries, "Enter display entries (lines)");
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index c561d1538c0..54552a00a11 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -1,7 +1,7 @@
#!/bin/sh
GVF=PERF-VERSION-FILE
-DEF_VER=v0.0.1.PERF
+DEF_VER=v0.0.2.PERF
LF='
'
diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c
index 856655d8b0b..b3637db025a 100644
--- a/tools/perf/util/svghelper.c
+++ b/tools/perf/util/svghelper.c
@@ -103,7 +103,7 @@ void open_svg(const char *filename, int cpus, int rows, u64 start, u64 end)
fprintf(svgfile, " rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.sample { fill:rgb( 0, 0,255); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.blocked { fill:rgb(255, 0, 0); fill-opacity:0.5; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
- fprintf(svgfile, " rect.waiting { fill:rgb(214,214, 0); fill-opacity:0.3; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
+ fprintf(svgfile, " rect.waiting { fill:rgb(224,214, 0); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.WAITING { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.cpu { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n");
fprintf(svgfile, " rect.pstate { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n");