aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig9
-rw-r--r--arch/arm/kernel/armksyms.c7
-rw-r--r--arch/arm/kernel/vmlinux.lds.S8
-rw-r--r--arch/arm/lib/Makefile13
-rw-r--r--arch/arm/lib/backtrace.S5
-rw-r--r--arch/arm/mm/Kconfig67
-rw-r--r--arch/arm/mm/Makefile10
-rw-r--r--arch/arm/mm/init.c2
-rw-r--r--arch/arm/mm/iomap.c55
-rw-r--r--arch/arm/mm/ioremap.c47
-rw-r--r--arch/arm/mm/nommu.c39
-rw-r--r--arch/arm/mm/proc-arm1020.S9
-rw-r--r--arch/arm/mm/proc-arm1020e.S9
-rw-r--r--arch/arm/mm/proc-arm1022.S9
-rw-r--r--arch/arm/mm/proc-arm1026.S9
-rw-r--r--arch/arm/mm/proc-arm6_7.S15
-rw-r--r--arch/arm/mm/proc-arm720.S12
-rw-r--r--arch/arm/mm/proc-arm920.S9
-rw-r--r--arch/arm/mm/proc-arm922.S9
-rw-r--r--arch/arm/mm/proc-arm925.S10
-rw-r--r--arch/arm/mm/proc-arm926.S9
-rw-r--r--arch/arm/mm/proc-sa110.S11
-rw-r--r--arch/arm/mm/proc-sa1100.S11
-rw-r--r--arch/arm/mm/proc-v6.S7
-rw-r--r--include/asm-arm/bugs.h4
-rw-r--r--include/asm-arm/domain.h7
-rw-r--r--include/asm-arm/mach/map.h9
-rw-r--r--include/asm-arm/memory.h75
-rw-r--r--include/asm-arm/mmu.h16
-rw-r--r--include/asm-arm/mmu_context.h2
-rw-r--r--include/asm-arm/page-nommu.h51
-rw-r--r--include/asm-arm/page.h8
-rw-r--r--include/asm-arm/pgalloc.h8
-rw-r--r--include/asm-arm/pgtable-nommu.h123
-rw-r--r--include/asm-arm/pgtable.h10
-rw-r--r--include/asm-arm/proc-fns.h4
-rw-r--r--include/asm-arm/uaccess.h139
37 files changed, 675 insertions, 172 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3d1a3fb7d5f..f123c7c9fc9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -188,23 +188,27 @@ config ARCH_IMX
config ARCH_IOP3XX
bool "IOP3xx-based"
+ depends on MMU
select PCI
help
Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
+ depends on MMU
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
+ depends on MMU
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_IXP23XX
bool "IXP23XX-based"
+ depends on MMU
select PCI
help
Support for Intel's IXP23xx (XScale) family of processors.
@@ -229,6 +233,7 @@ config ARCH_PNX4008
config ARCH_PXA
bool "PXA2xx-based"
+ depends on MMU
select ARCH_MTD_XIP
help
Support for Intel's PXA2XX processor line.
@@ -339,6 +344,10 @@ config XSCALE_PMU
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
+if !MMU
+source "arch/arm/Kconfig-nommu"
+endif
+
endmenu
source "arch/arm/common/Kconfig"
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index f8bb7abd3e9..da69e660574 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -109,11 +109,13 @@ EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
/* user mem (segment) */
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+
+#ifdef CONFIG_MMU
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
@@ -123,6 +125,7 @@ EXPORT_SYMBOL(__put_user_1);
EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
+#endif
/* crypto hash */
EXPORT_SYMBOL(sha_transform);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 2b254e88595..2df9688a702 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -80,6 +80,10 @@ SECTIONS
*(.exit.text)
*(.exit.data)
*(.exitcall.exit)
+#ifndef CONFIG_MMU
+ *(.fixup)
+ *(__ex_table)
+#endif
}
.text : { /* Real text segment */
@@ -87,7 +91,9 @@ SECTIONS
*(.text)
SCHED_TEXT
LOCK_TEXT
+#ifdef CONFIG_MMU
*(.fixup)
+#endif
*(.gnu.warning)
*(.rodata)
*(.rodata.*)
@@ -142,7 +148,9 @@ SECTIONS
*/
. = ALIGN(32);
__start___ex_table = .;
+#ifdef CONFIG_MMU
*(__ex_table)
+#endif
__stop___ex_table = .;
/*
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 7b726b627ea..30351cd4560 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -6,28 +6,31 @@
lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
- copy_page.o delay.o findbit.o memchr.o memcpy.o \
+ delay.o findbit.o memchr.o memcpy.o \
memmove.o memset.o memzero.o setbit.o \
strncpy_from_user.o strnlen_user.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
- getuser.o putuser.o clear_user.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
+mmu-y := clear_user.o copy_page.o getuser.o putuser.o
+
# the code in uaccess.S is not preemption safe and
# probably faster on ARMv3 only
ifeq ($(CONFIG_PREEMPT),y)
- lib-y += copy_from_user.o copy_to_user.o
+ mmu-y += copy_from_user.o copy_to_user.o
else
ifneq ($(CONFIG_CPU_32v3),y)
- lib-y += copy_from_user.o copy_to_user.o
+ mmu-y += copy_from_user.o copy_to_user.o
else
- lib-y += uaccess.o
+ mmu-y += uaccess.o
endif
endif
+lib-$(CONFIG_MMU) += $(mmu-y)
+
ifeq ($(CONFIG_CPU_32v3),y)
lib-y += io-readsw-armv3.o io-writesw-armv3.o
else
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 058b80d72aa..91f993f2e9d 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -97,16 +97,13 @@ ENTRY(c_backtrace)
b 1007f
/*
- * Fixup for LDMDB
+ * Fixup for LDMDB. Note that this must not be in the fixup section.
*/
- .section .fixup,"ax"
- .align 0
1007: ldr r0, =.Lbad
mov r1, frame
bl printk
ldmfd sp!, {r4 - r8, pc}
.ltorg
- .previous
.section __ex_table,"a"
.align 3
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ecf5e232a6f..c4bca753165 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -15,8 +15,8 @@ config CPU_ARM610
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
- select CPU_COPY_V3
- select CPU_TLB_V3
+ select CPU_COPY_V3 if MMU
+ select CPU_TLB_V3 if MMU
help
The ARM610 is the successor to the ARM3 processor
and was produced by VLSI Technology Inc.
@@ -31,8 +31,8 @@ config CPU_ARM710
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
- select CPU_COPY_V3
- select CPU_TLB_V3
+ select CPU_COPY_V3 if MMU
+ select CPU_TLB_V3 if MMU
help
A 32-bit RISC microprocessor based on the ARM7 processor core
designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -50,8 +50,8 @@ config CPU_ARM720T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
select CPU_CACHE_VIVT
- select CPU_COPY_V4WT
- select CPU_TLB_V4WT
+ select CPU_COPY_V4WT if MMU
+ select CPU_TLB_V4WT if MMU
help
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
MMU built around an ARM7TDMI core.
@@ -68,8 +68,8 @@ config CPU_ARM920T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
and is used in the Maverick EP9312 and the Samsung S3C2410.
@@ -89,8 +89,8 @@ config CPU_ARM922T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
help
The ARM922T is a version of the ARM920T, but with smaller
instruction and data caches. It is used in Altera's
@@ -108,8 +108,8 @@ config CPU_ARM925T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
help
The ARM925T is a mix between the ARM920T and ARM926T, but with
different instruction and data caches. It is used in TI's OMAP
@@ -126,8 +126,8 @@ config CPU_ARM926T
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
help
This is a variant of the ARM920. It has slightly different
instruction sequences for cache and TLB operations. Curiously,
@@ -144,8 +144,8 @@ config CPU_ARM1020
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
help
The ARM1020 is the 32K cached version of the ARM10 processor,
with an addition of a floating-point unit.
@@ -161,8 +161,8 @@ config CPU_ARM1020E
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
depends on n
# ARM1022E
@@ -172,8 +172,8 @@ config CPU_ARM1022
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB # can probably do better
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU # can probably do better
+ select CPU_TLB_V4WBI if MMU
help
The ARM1022E is an implementation of the ARMv5TE architecture
based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
@@ -189,8 +189,8 @@ config CPU_ARM1026
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB # can probably do better
- select CPU_TLB_V4WBI
+ select CPU_COPY_V4WB if MMU # can probably do better
+ select CPU_TLB_V4WBI if MMU
help
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
based upon the ARM10 integer core.
@@ -207,8 +207,8 @@ config CPU_SA110
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
- select CPU_COPY_V4WB
- select CPU_TLB_V4WB
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WB if MMU
help
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
is available at five speeds ranging from 100 MHz to 233 MHz.
@@ -227,7 +227,7 @@ config CPU_SA1100
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
- select CPU_TLB_V4WB
+ select CPU_TLB_V4WB if MMU
# XScale
config CPU_XSCALE
@@ -237,7 +237,7 @@ config CPU_XSCALE
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
- select CPU_TLB_V4WBI
+ select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
config CPU_XSC3
@@ -247,7 +247,7 @@ config CPU_XSC3
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
- select CPU_TLB_V4WBI
+ select CPU_TLB_V4WBI if MMU
select IO_36
# ARMv6
@@ -258,8 +258,8 @@ config CPU_V6
select CPU_ABRT_EV6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
- select CPU_COPY_V6
- select CPU_TLB_V6
+ select CPU_COPY_V6 if MMU
+ select CPU_TLB_V6 if MMU
# ARMv6k
config CPU_32v6K
@@ -277,17 +277,17 @@ config CPU_32v6K
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
bool
- select TLS_REG_EMUL if SMP
+ select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
config CPU_32v4
bool
- select TLS_REG_EMUL if SMP
+ select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
config CPU_32v5
bool
- select TLS_REG_EMUL if SMP
+ select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
config CPU_32v6
@@ -334,6 +334,7 @@ config CPU_CACHE_VIVT
config CPU_CACHE_VIPT
bool
+if MMU
# The copy-page model
config CPU_COPY_V3
bool
@@ -372,6 +373,8 @@ config CPU_TLB_V4WBI
config CPU_TLB_V6
bool
+endif
+
#
# CPU supports 36-bit I/O
#
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 07a53850578..21a2770226e 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -2,10 +2,16 @@
# Makefile for the linux arm-specific parts of the memory manager.
#
-obj-y := consistent.o extable.o fault-armv.o \
- fault.o flush.o init.o ioremap.o mmap.o \
+obj-y := consistent.o extable.o fault.o init.o \
+ iomap.o
+
+obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
mm-armv.o
+ifneq ($(CONFIG_MMU),y)
+obj-y += nommu.o
+endif
+
obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 9ea1f87a707..989fd681c82 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -26,8 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#define TABLE_SIZE (2 * PTRS_PER_PTE * sizeof(pte_t))
-
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c
new file mode 100644
index 00000000000..62066f3020c
--- /dev/null
+++ b/arch/arm/mm/iomap.c
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/mm/iomap.c
+ *
+ * Map IO port and PCI memory spaces so that {read,write}[bwl] can
+ * be used to access this memory.
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+
+#ifdef __io
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return __io(port);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif
+
+#ifdef CONFIG_PCI
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len || !start)
+ return NULL;
+ if (maxlen && len > maxlen)
+ len = maxlen;
+ if (flags & IORESOURCE_IO)
+ return ioport_map(start, len);
+ if (flags & IORESOURCE_MEM) {
+ if (flags & IORESOURCE_CACHEABLE)
+ return ioremap(start, len);
+ return ioremap_nocache(start, len);
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ if ((unsigned long)addr >= VMALLOC_START &&
+ (unsigned long)addr < VMALLOC_END)
+ iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
+#endif
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index c1f7180c7be..7691cfdba56 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -176,50 +176,3 @@ void __iounmap(void __iomem *addr)
vunmap((void *)(PAGE_MASK & (unsigned long)addr));
}
EXPORT_SYMBOL(__iounmap);
-
-#ifdef __io
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- return __io(port);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-}
-EXPORT_SYMBOL(ioport_unmap);
-#endif
-
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#include <linux/ioport.h>
-
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
-{
- unsigned long start = pci_resource_start(dev, bar);
- unsigned long len = pci_resource_len(dev, bar);
- unsigned long flags = pci_resource_flags(dev, bar);
-
- if (!len || !start)
- return NULL;
- if (maxlen && len > maxlen)
- len = maxlen;
- if (flags & IORESOURCE_IO)
- return ioport_map(start, len);
- if (flags & IORESOURCE_MEM) {
- if (flags & IORESOURCE_CACHEABLE)
- return ioremap(start, len);
- return ioremap_nocache(start, len);
- }
- return NULL;
-}
-EXPORT_SYMBOL(pci_iomap);
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
- if ((unsigned long)addr >= VMALLOC_START &&
- (unsigned long)addr < VMALLOC_END)
- iounmap(addr);
-}
-EXPORT_SYMBOL(pci_iounmap);
-#endif
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
new file mode 100644
index 00000000000..1464ed817b5
--- /dev/null
+++ b/arch/arm/mm/nommu.c
@@ -0,0 +1,39 @@
+/*
+ * linux/arch/arm/mm/nommu.c
+ *
+ * ARM uCLinux supporting functions.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/page.h>
+
+void flush_dcache_page(struct page *page)
+{
+ __cpuc_flush_dcache_page(page_address(page));
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void __iomem *__ioremap_pfn(unsigned long pfn, unsigned long offset,
+ size_t size, unsigned long flags)
+{
+ if (pfn >= (0x100000000ULL >> PAGE_SHIFT))
+ return NULL;
+ return (void __iomem *) (offset + (pfn << PAGE_SHIFT));
+}
+EXPORT_SYMBOL(__ioremap_pfn);
+
+void __iomem *__ioremap(unsigned long phys_addr, size_t size,
+ unsigned long flags)
+{
+ return (void __iomem *)phys_addr;
+}
+EXPORT_SYMBOL(__ioremap);
+
+void __iounmap(void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 959588884fa..b9abbafca81 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -359,6 +362,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1020_switch_mm)
+#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r3, c7, c10, 4
mov r1, #0xF @ 16 segments
@@ -383,6 +387,7 @@ ENTRY(cpu_arm1020_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+#endif /* CONFIG_MMU */
mov pc, lr
/*
@@ -392,6 +397,7 @@ ENTRY(cpu_arm1020_switch_mm)
*/
.align 5
ENTRY(cpu_arm1020_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -421,6 +427,7 @@ ENTRY(cpu_arm1020_set_pte)
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif /* CONFIG_MMU */
mov pc, lr
__INIT
@@ -430,7 +437,9 @@ __arm1020_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm1020_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index be6d081ff2b..bcd5ee022e0 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020e_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -344,6 +347,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1020e_switch_mm)
+#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r3, c7, c10, 4
mov r1, #0xF @ 16 segments
@@ -367,6 +371,7 @@ ENTRY(cpu_arm1020e_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -376,6 +381,7 @@ ENTRY(cpu_arm1020e_switch_mm)
*/
.align 5
ENTRY(cpu_arm1020e_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -403,6 +409,7 @@ ENTRY(cpu_arm1020e_set_pte)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
+#endif /* CONFIG_MMU */
mov pc, lr
__INIT
@@ -412,7 +419,9 @@ __arm1020e_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm1020e_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index f778545d57a..b0ccff4fadd 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -90,7 +91,9 @@ ENTRY(cpu_arm1022_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -333,6 +336,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1022_switch_mm)
+#ifdef CONFIG_MMU
#ifndef CONFIG_CPU_DCACHE_DISABLE
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -349,6 +353,7 @@ ENTRY(cpu_arm1022_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -358,6 +363,7 @@ ENTRY(cpu_arm1022_switch_mm)
*/
.align 5
ENTRY(cpu_arm1022_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -385,6 +391,7 @@ ENTRY(cpu_arm1022_set_pte)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
+#endif /* CONFIG_MMU */
mov pc, lr
__INIT
@@ -394,7 +401,9 @@ __arm1022_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm1022_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 148c111fde7..abe850c9a64 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -3,6 +3,7 @@
*
* Copyright (C) 2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -90,7 +91,9 @@ ENTRY(cpu_arm1026_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -327,6 +330,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm1026_switch_mm)
+#ifdef CONFIG_MMU
mov r1, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
1: mrc p15, 0, r15, c7, c14, 3 @ test, clean, invalidate
@@ -338,6 +342,7 @@ ENTRY(cpu_arm1026_switch_mm)
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -347,6 +352,7 @@ ENTRY(cpu_arm1026_switch_mm)
*/
.align 5
ENTRY(cpu_arm1026_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -374,6 +380,7 @@ ENTRY(cpu_arm1026_set_pte)
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
+#endif /* CONFIG_MMU */
mov pc, lr
@@ -384,8 +391,10 @@ __arm1026_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
mcr p15, 0, r4, c2, c0 @ load page table pointer
+#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #4 @ explicitly disable writeback
mcr p15, 7, r0, c15, c0, 0
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 540359b475d..7a705edfa4b 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-arm6,7.S
*
* Copyright (C) 1997-2000 Russell King
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -199,10 +200,12 @@ ENTRY(cpu_arm7_do_idle)
*/
ENTRY(cpu_arm6_switch_mm)
ENTRY(cpu_arm7_switch_mm)
+#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
+#endif
mov pc, lr
/*
@@ -214,6 +217,7 @@ ENTRY(cpu_arm7_switch_mm)
.align 5
ENTRY(cpu_arm6_set_pte)
ENTRY(cpu_arm7_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -232,6 +236,7 @@ ENTRY(cpu_arm7_set_pte)
movne r2, #0
str r2, [r0] @ hardware version
+#endif /* CONFIG_MMU */
mov pc, lr
/*
@@ -243,7 +248,9 @@ ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
+#ifdef CONFIG_MMU
mcr p15, 0, r1, c5, c0, 0 @ flush TLB
+#endif
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
@@ -253,19 +260,27 @@ ENTRY(cpu_arm7_reset)
.type __arm6_setup, #function
__arm6_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mov r0, #0x3d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0011 1101
+#else
+ mov r0, #0x3c @ . ..RS BLDP WCA.
+#endif
mov pc, lr
.size __arm6_setup, . - __arm6_setup
.type __arm7_setup, #function
__arm7_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mcr p15, 0, r0, c3, c0 @ load domain access register
mov r0, #0x7d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0111 1101
+#else
+ mov r0, #0x7c @ . ..RS BLDP WCA.
+#endif
mov pc, lr
.size __arm7_setup, . - __arm7_setup
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 26f00ee2ad9..86102467d37 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -4,6 +4,7 @@
* Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
* Rob Scott (rscott@mtrob.fdns.net)
* Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2004.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,6 +30,7 @@
* out of 'proc-arm6,7.S' per RMK discussion
* 07-25-2000 SJH Added idle function.
* 08-25-2000 DBS Updated for integration of ARM Ltd version.
+ * 04-20-2004 HSC modified for non-paged memory management mode.
*/
#include <linux/linkage.h>
#include <linux/init.h>
@@ -75,10 +77,12 @@ ENTRY(cpu_arm720_do_idle)
* the new.
*/
ENTRY(cpu_arm720_switch_mm)
+#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
+#endif
mov pc, lr
/*
@@ -89,6 +93,7 @@ ENTRY(cpu_arm720_switch_mm)
*/
.align 5
ENTRY(cpu_arm720_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -107,6 +112,7 @@ ENTRY(cpu_arm720_set_pte)
movne r2, #0
str r2, [r0] @ hardware version
+#endif
mov pc, lr
/*
@@ -117,7 +123,9 @@ ENTRY(cpu_arm720_set_pte)
ENTRY(cpu_arm720_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
+#endif
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x2100 @ ..v....s........
@@ -130,7 +138,9 @@ ENTRY(cpu_arm720_reset)
__arm710_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
+#endif
mrc p15, 0, r0, c1, c0 @ get control register
ldr r5, arm710_cr1_clear
bic r0, r0, r5
@@ -156,7 +166,9 @@ arm710_cr1_set:
__arm720_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
+#endif
mrc p15, 0, r0, c1, c0 @ get control register
ldr r5, arm720_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index a17f79e0199..31dc839ba07 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -3,6 +3,7 @@
*
* Copyright (C) 1999,2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -97,7 +98,9 @@ ENTRY(cpu_arm920_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -317,6 +320,7 @@ ENTRY(cpu_arm920_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm920_switch_mm)
+#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
@@ -337,6 +341,7 @@ ENTRY(cpu_arm920_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -346,6 +351,7 @@ ENTRY(cpu_arm920_switch_mm)
*/
.align 5
ENTRY(cpu_arm920_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -372,6 +378,7 @@ ENTRY(cpu_arm920_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif /* CONFIG_MMU */
mov pc, lr
__INIT
@@ -381,7 +388,9 @@ __arm920_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm920_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index bbde4a024a4..9e57c34f5c0 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -4,6 +4,7 @@
* Copyright (C) 1999,2000 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* Copyright (C) 2001 Altera Corporation
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -99,7 +100,9 @@ ENTRY(cpu_arm922_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -321,6 +324,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm922_switch_mm)
+#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
@@ -341,6 +345,7 @@ ENTRY(cpu_arm922_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -350,6 +355,7 @@ ENTRY(cpu_arm922_switch_mm)
*/
.align 5
ENTRY(cpu_arm922_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -376,6 +382,7 @@ ENTRY(cpu_arm922_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif /* CONFIG_MMU */
mov pc, lr
__INIT
@@ -385,7 +392,9 @@ __arm922_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, arm922_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 224ce226a01..8d47c9f3f93 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -9,6 +9,8 @@
* Update for Linux-2.6 and cache flush improvements
* Copyright (C) 2004 Nokia Corporation by Tony Lindgren <tony@atomide.com>
*
+ * hacked for non-paged-MM by Hyok S. Choi, 2004.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -122,7 +124,9 @@ ENTRY(cpu_arm925_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -369,6 +373,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm925_switch_mm)
+#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
@@ -383,6 +388,7 @@ ENTRY(cpu_arm925_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -392,6 +398,7 @@ ENTRY(cpu_arm925_switch_mm)
*/
.align 5
ENTRY(cpu_arm925_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -420,6 +427,7 @@ ENTRY(cpu_arm925_set_pte)
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif /* CONFIG_MMU */
mov pc, lr
__INIT
@@ -438,7 +446,9 @@ __arm925_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #4 @ disable write-back on caches explicitly
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 4e2a087cf38..cb4d8f33d2a 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -3,6 +3,7 @@
*
* Copyright (C) 1999-2001 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -85,7 +86,9 @@ ENTRY(cpu_arm926_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -329,6 +332,7 @@ ENTRY(cpu_arm926_dcache_clean_area)
*/
.align 5
ENTRY(cpu_arm926_switch_mm)
+#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
@@ -341,6 +345,7 @@ ENTRY(cpu_arm926_switch_mm)
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mov pc, lr
/*
@@ -350,6 +355,7 @@ ENTRY(cpu_arm926_switch_mm)
*/
.align 5
ENTRY(cpu_arm926_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -378,6 +384,7 @@ ENTRY(cpu_arm926_set_pte)
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
mov pc, lr
__INIT
@@ -387,7 +394,9 @@ __arm926_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index a2dd5ae1077..5a760a2c629 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-sa110.S
*
* Copyright (C) 1997-2002 Russell King
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -67,7 +68,9 @@ ENTRY(cpu_sa110_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -130,11 +133,15 @@ ENTRY(cpu_sa110_dcache_clean_area)
*/
.align 5
ENTRY(cpu_sa110_switch_mm)
+#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ldr pc, [sp], #4
+#else
+ mov pc, lr
+#endif
/*
* cpu_sa110_set_pte(ptep, pte)
@@ -143,6 +150,7 @@ ENTRY(cpu_sa110_switch_mm)
*/
.align 5
ENTRY(cpu_sa110_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -164,6 +172,7 @@ ENTRY(cpu_sa110_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
mov pc, lr
__INIT
@@ -173,7 +182,9 @@ __sa110_setup:
mov r10, #0
mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, sa110_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 777ad99c143..0a2107ad4c3 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-sa1100.S
*
* Copyright (C) 1997-2002 Russell King
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -77,7 +78,9 @@ ENTRY(cpu_sa1100_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
@@ -142,12 +145,16 @@ ENTRY(cpu_sa1100_dcache_clean_area)
*/
.align 5
ENTRY(cpu_sa1100_switch_mm)
+#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ldr pc, [sp], #4
+#else
+ mov pc, lr
+#endif
/*
* cpu_sa1100_set_pte(ptep, pte)
@@ -156,6 +163,7 @@ ENTRY(cpu_sa1100_switch_mm)
*/
.align 5
ENTRY(cpu_sa1100_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -177,6 +185,7 @@ ENTRY(cpu_sa1100_set_pte)
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
mov pc, lr
__INIT
@@ -186,7 +195,9 @@ __sa1100_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, sa1100_cr1_clear
bic r0, r0, r5
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 09b1a41a6de..ca13d4d05f6 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -2,6 +2,7 @@
* linux/arch/arm/mm/proc-v6.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Modified by Catalin Marinas for noMMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -88,6 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area)
* - we are not using split page tables
*/
ENTRY(cpu_v6_switch_mm)
+#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
#ifdef CONFIG_SMP
@@ -97,6 +99,7 @@ ENTRY(cpu_v6_switch_mm)
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
mcr p15, 0, r1, c13, c0, 1 @ set context ID
+#endif
mov pc, lr
/*
@@ -119,6 +122,7 @@ ENTRY(cpu_v6_switch_mm)
* 1111 0 1 1 r/w r/w
*/
ENTRY(cpu_v6_set_pte)
+#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0x000003f0
@@ -145,6 +149,7 @@ ENTRY(cpu_v6_set_pte)
str r2, [r0]
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
mov pc, lr
@@ -194,12 +199,14 @@ __v6_setup:
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
#ifdef CONFIG_SMP
orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable
#endif
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
+#endif /* CONFIG_MMU */
#ifdef CONFIG_VFP
mrc p15, 0, r0, c1, c0, 2
orr r0, r0, #(0xf << 20)
diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h
index 4c80ec519d4..ca54eb0f12d 100644
--- a/include/asm-arm/bugs.h
+++ b/include/asm-arm/bugs.h
@@ -10,8 +10,12 @@
#ifndef __ASM_BUGS_H
#define __ASM_BUGS_H
+#ifdef CONFIG_MMU
extern void check_writebuffer_bugs(void);
#define check_bugs() check_writebuffer_bugs()
+#else
+#define check_bugs() do { } while (0)
+#endif
#endif
diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
index f8ea2de4848..4c2885abbe6 100644
--- a/include/asm-arm/domain.h
+++ b/include/asm-arm/domain.h
@@ -50,6 +50,8 @@
#define domain_val(dom,type) ((type) << (2*(dom)))
#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
#define set_domain(x) \
do { \
__asm__ __volatile__( \
@@ -66,5 +68,10 @@
set_domain(thread->cpu_domain); \
} while (0)
+#else
+#define set_domain(x) do { } while (0)
+#define modify_domain(dom,type) do { } while (0)
+#endif
+
#endif
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index e8ea67c97c7..cef5364ed5f 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -16,8 +16,6 @@ struct map_desc {
unsigned int type;
};
-struct meminfo;
-
#define MT_DEVICE 0
#define MT_CACHECLEAN 1
#define MT_MINICLEAN 2
@@ -28,7 +26,8 @@ struct meminfo;
#define MT_IXP2000_DEVICE 7
#define MT_NONSHARED_DEVICE 8
-extern void create_memmap_holes(struct meminfo *);
-extern void memtable_init(struct meminfo *);
+#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
-extern void setup_io_desc(void);
+#else
+#define iotable_init(map,num) do { } while (0)
+#endif
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index 731e321a57d..94f973b704f 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -2,6 +2,7 @@
* linux/include/asm-arm/memory.h
*
* Copyright (C) 2000-2002 Russell King
+ * modification for nommu, Hyok S. Choi, 2004
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -26,6 +27,8 @@
#include <asm/arch/memory.h>
#include <asm/sizes.h>
+#ifdef CONFIG_MMU
+
#ifndef TASK_SIZE
/*
* TASK_SIZE - the maximum size of a user space task.
@@ -48,6 +51,60 @@
#endif
/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULE_END (PAGE_OFFSET)
+#define MODULE_START (MODULE_END - 16*1048576)
+
+#if TASK_SIZE > MODULE_START
+#error Top of user space clashes with start of module space
+#endif
+
+/*
+ * The XIP kernel gets mapped at the bottom of the module vm area.
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
+
+#else /* CONFIG_MMU */
+
+/*
+ * The limitation of user task size can grow up to the end of free ram region.
+ * It is difficult to define and perhaps will never meet the original meaning
+ * of this define that was meant to.
+ * Fortunately, there is no reference for this in noMMU mode, for now.
+ */
+#ifndef TASK_SIZE
+#define TASK_SIZE (CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef TASK_UNMAPPED_BASE
+#define TASK_UNMAPPED_BASE UL(0x00000000)
+#endif
+
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET (CONFIG_DRAM_BASE)
+#endif
+
+#ifndef END_MEM
+#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET (PHYS_OFFSET)
+#endif
+
+/*
+ * The module can be at any place in ram in nommu mode.
+ */
+#define MODULE_END (END_MEM)
+#define MODULE_START (PHYS_OFFSET)
+
+#endif /* !CONFIG_MMU */
+
+/*
* Size of DMA-consistent memory region. Must be multiple of 2M,
* between 2MB and 14MB inclusive.
*/
@@ -71,24 +128,6 @@
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#define MODULE_END (PAGE_OFFSET)
-#define MODULE_START (MODULE_END - 16*1048576)
-
-#if TASK_SIZE > MODULE_START
-#error Top of user space clashes with start of module space
-#endif
-
-/*
- * The XIP kernel gets mapped at the bottom of the module vm area.
- * Since we use sections to map it, this macro replaces the physical address
- * with its virtual address while keeping offset from the base section.
- */
-#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
-
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h
index a457cb71984..23dde52e094 100644
--- a/include/asm-arm/mmu.h
+++ b/include/asm-arm/mmu.h
@@ -1,6 +1,8 @@
#ifndef __ARM_MMU_H
#define __ARM_MMU_H
+#ifdef CONFIG_MMU
+
typedef struct {
#if __LINUX_ARM_ARCH__ >= 6
unsigned int id;
@@ -13,4 +15,18 @@ typedef struct {
#define ASID(mm) (0)
#endif
+#else
+
+/*
+ * From nommu.h:
+ * Copyright (C) 2002, David McCullough <davidm@snapgear.com>
+ * modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
+ */
+typedef struct {
+ struct vm_list_struct *vmlist;
+ unsigned long end_brk;
+} mm_context_t;
+
+#endif
+
#endif
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
index 81c59facea3..9fadb01e030 100644
--- a/include/asm-arm/mmu_context.h
+++ b/include/asm-arm/mmu_context.h
@@ -82,6 +82,7 @@ static inline void
switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
+#ifdef CONFIG_MMU
unsigned int cpu = smp_processor_id();
if (prev != next) {
@@ -91,6 +92,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
if (cache_is_vivt())
cpu_clear(cpu, prev->cpu_vm_mask);
}
+#endif
}
#define deactivate_mm(tsk,mm) do { } while (0)
diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h
new file mode 100644
index 00000000000..a1bcad06048
--- /dev/null
+++ b/include/asm-arm/page-nommu.h
@@ -0,0 +1,51 @@
+/*
+ * linux/include/asm-arm/page-nommu.h
+ *
+ * Copyright (C) 2004 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PAGE_NOMMU_H
+#define _ASMARM_PAGE_NOMMU_H
+
+#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
+#define KTHREAD_SIZE (8192)
+#else
+#define KTHREAD_SIZE PAGE_SIZE
+#endif
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x) (x)
+#define pmd_val(x) (x)
+#define pgd_val(x) ((x)[0])
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pmd(x) (x)
+#define __pgprot(x) (x)
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 66cfeb5290e..63d12f0244c 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -23,6 +23,12 @@
#ifndef __ASSEMBLY__
+#ifndef CONFIG_MMU
+
+#include "page-nommu.h"
+
+#else
+
#include <asm/glue.h>
/*
@@ -171,6 +177,8 @@ typedef unsigned long pgprot_t;
/* the upper-most page table pointer */
extern pmd_t *top_pmd;
+#endif /* CONFIG_MMU */
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h
index c4ac2e67768..4d439455291 100644
--- a/include/asm-arm/pgalloc.h
+++ b/include/asm-arm/pgalloc.h
@@ -16,6 +16,10 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#define check_pgt_cache() do { } while (0)
+
+#ifdef CONFIG_MMU
+
#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
@@ -32,8 +36,6 @@ extern void free_pgd_slow(pgd_t *pgd);
#define pgd_alloc(mm) get_pgd_slow(mm)
#define pgd_free(pgd) free_pgd_slow(pgd)
-#define check_pgt_cache() do { } while (0)
-
/*
* Allocate one PTE table.
*
@@ -126,4 +128,6 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep)
__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
}
+#endif /* CONFIG_MMU */
+
#endif
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
new file mode 100644
index 00000000000..b13322dccf4
--- /dev/null
+++ b/include/asm-arm/pgtable-nommu.h
@@ -0,0 +1,123 @@
+/*
+ * linux/include/asm-arm/pgtable-nommu.h
+ *
+ * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 2004 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_NOMMU_H
+#define _ASMARM_PGTABLE_NOMMU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd) (1)
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *)0)
+/* FIXME */
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGDIR_SHIFT 21
+
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+/* FIXME */
+
+#define PAGE_NONE __pgprot(0)
+#define PAGE_SHARED __pgprot(0)
+#define PAGE_COPY __pgprot(0)
+#define PAGE_READONLY __pgprot(0)
+#define PAGE_KERNEL __pgprot(0)
+
+//extern void paging_init(struct meminfo *, struct machine_desc *);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+
+typedef pte_t *pte_addr_t;
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot) __pgprot(0)
+#define pgprot_writecombine(prot) __pgprot(0)
+
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init() do { } while (0)
+#define io_remap_page_range remap_page_range
+#define io_remap_pfn_range remap_pfn_range
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#define FIRST_USER_ADDRESS (0)
+
+#else
+
+/*
+ * dummy tlb and user structures.
+ */
+#define v3_tlb_fns (0)
+#define v4_tlb_fns (0)
+#define v4wb_tlb_fns (0)
+#define v4wbi_tlb_fns (0)
+#define v6_tlb_fns (0)
+
+#define v3_user_fns (0)
+#define v4_user_fns (0)
+#define v4_mc_user_fns (0)
+#define v4wb_user_fns (0)
+#define v4wt_user_fns (0)
+#define v6_user_fns (0)
+#define xscale_mc_user_fns (0)
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index e85c08d78dd..8d3919c6458 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -11,9 +11,15 @@
#define _ASMARM_PGTABLE_H
#include <asm-generic/4level-fixup.h>
+#include <asm/proc-fns.h>
+
+#ifndef CONFIG_MMU
+
+#include "pgtable-nommu.h"
+
+#else
#include <asm/memory.h>
-#include <asm/proc-fns.h>
#include <asm/arch/vmalloc.h>
/*
@@ -378,4 +384,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
#endif /* !__ASSEMBLY__ */
+#endif /* CONFIG_MMU */
+
#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h
index e9310895e79..1bde92cdaeb 100644
--- a/include/asm-arm/proc-fns.h
+++ b/include/asm-arm/proc-fns.h
@@ -165,6 +165,8 @@
#include <asm/memory.h>
+#ifdef CONFIG_MMU
+
#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
#define cpu_get_pgd() \
@@ -176,6 +178,8 @@
(pgd_t *)phys_to_virt(pg); \
})
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_PROCFNS_H */
diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h
index f909dc75301..87aba57a66c 100644
--- a/include/asm-arm/uaccess.h
+++ b/include/asm-arm/uaccess.h
@@ -41,15 +41,24 @@ struct exception_table_entry
extern int fixup_exception(struct pt_regs *regs);
/*
+ * These two are intentionally not defined anywhere - if the kernel
+ * code generates any references to them, that's a bug.
+ */
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
+/*
* Note that this is actually 0x1,0000,0000
*/
#define KERNEL_DS 0x00000000
-#define USER_DS TASK_SIZE
-
#define get_ds() (KERNEL_DS)
+
+#ifdef CONFIG_MMU
+
+#define USER_DS TASK_SIZE
#define get_fs() (current_thread_info()->addr_limit)
-static inline void set_fs (mm_segment_t fs)
+static inline void set_fs(mm_segment_t fs)
{
current_thread_info()->addr_limit = fs;
modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
@@ -75,8 +84,6 @@ static inline void set_fs (mm_segment_t fs)
: "cc"); \
flag; })
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-
/*
* Single-value transfer routines. They automatically use the right
* size if we just have the right pointer type. Note that the functions
@@ -87,20 +94,10 @@ static inline void set_fs (mm_segment_t fs)
* fixup code, but there are a few places where it intrudes on the
* main code path. When we only write to user space, there is no
* problem.
- *
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success. Note that these
- * versions are void (ie, don't return a value as such).
*/
-
extern int __get_user_1(void *);
extern int __get_user_2(void *);
extern int __get_user_4(void *);
-extern int __get_user_bad(void);
#define __get_user_x(__r2,__p,__e,__s,__i...) \
__asm__ __volatile__ ( \
@@ -131,6 +128,74 @@ extern int __get_user_bad(void);
__e; \
})
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+
+#define __put_user_x(__r2,__p,__e,__s) \
+ __asm__ __volatile__ ( \
+ __asmeq("%0", "r0") __asmeq("%2", "r2") \
+ "bl __put_user_" #__s \
+ : "=&r" (__e) \
+ : "0" (__p), "r" (__r2) \
+ : "ip", "lr", "cc")
+
+#define put_user(x,p) \
+ ({ \
+ const register typeof(*(p)) __r2 asm("r2") = (x); \
+ const register typeof(*(p)) __user *__p asm("r0") = (p);\
+ register int __e asm("r0"); \
+ switch (sizeof(*(__p))) { \
+ case 1: \
+ __put_user_x(__r2, __p, __e, 1); \
+ break; \
+ case 2: \
+ __put_user_x(__r2, __p, __e, 2); \
+ break; \
+ case 4: \
+ __put_user_x(__r2, __p, __e, 4); \
+ break; \
+ case 8: \
+ __put_user_x(__r2, __p, __e, 8); \
+ break; \
+ default: __e = __put_user_bad(); break; \
+ } \
+ __e; \
+ })
+
+#else /* CONFIG_MMU */
+
+/*
+ * uClinux has only one addr space, so has simplified address limits.
+ */
+#define USER_DS KERNEL_DS
+
+#define segment_eq(a,b) (1)
+#define __addr_ok(addr) (1)
+#define __range_ok(addr,size) (0)
+#define get_fs() (KERNEL_DS)
+
+static inline void set_fs(mm_segment_t fs)
+{
+}
+
+#define get_user(x,p) __get_user(x,p)
+#define put_user(x,p) __put_user(x,p)
+
+#endif /* CONFIG_MMU */
+
+#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success. Note that these
+ * versions are void (ie, don't return a value as such).
+ */
#define __get_user(x,ptr) \
({ \
long __gu_err = 0; \
@@ -212,43 +277,6 @@ do { \
: "r" (addr), "i" (-EFAULT) \
: "cc")
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-extern int __put_user_bad(void);
-
-#define __put_user_x(__r2,__p,__e,__s) \
- __asm__ __volatile__ ( \
- __asmeq("%0", "r0") __asmeq("%2", "r2") \
- "bl __put_user_" #__s \
- : "=&r" (__e) \
- : "0" (__p), "r" (__r2) \
- : "ip", "lr", "cc")
-
-#define put_user(x,p) \
- ({ \
- const register typeof(*(p)) __r2 asm("r2") = (x); \
- const register typeof(*(p)) __user *__p asm("r0") = (p);\
- register int __e asm("r0"); \
- switch (sizeof(*(__p))) { \
- case 1: \
- __put_user_x(__r2, __p, __e, 1); \
- break; \
- case 2: \
- __put_user_x(__r2, __p, __e, 2); \
- break; \
- case 4: \
- __put_user_x(__r2, __p, __e, 4); \
- break; \
- case 8: \
- __put_user_x(__r2, __p, __e, 8); \
- break; \
- default: __e = __put_user_bad(); break; \
- } \
- __e; \
- })
-
#define __put_user(x,ptr) \
({ \
long __pu_err = 0; \
@@ -354,9 +382,16 @@ do { \
: "cc")
+#ifdef CONFIG_MMU
extern unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n);
extern unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n);
extern unsigned long __clear_user(void __user *addr, unsigned long n);
+#else
+#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0)
+#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0)
+#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
+#endif
+
extern unsigned long __strncpy_from_user(char *to, const char __user *from, unsigned long count);
extern unsigned long __strnlen_user(const char __user *s, long n);