aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/powerpc/dts-bindings/mtd-physmap.txt42
-rw-r--r--arch/arm/mach-omap2/board-apollon.c4
-rw-r--r--arch/arm/mach-omap2/gpmc.c63
-rw-r--r--arch/arm/plat-omap/include/mach/gpmc.h4
-rw-r--r--drivers/Makefile4
-rw-r--r--drivers/mtd/Kconfig16
-rw-r--r--drivers/mtd/afs.c2
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c11
-rwxr-xr-x[-rw-r--r--]drivers/mtd/chips/cfi_util.c4
-rw-r--r--drivers/mtd/chips/jedec_probe.c22
-rw-r--r--drivers/mtd/devices/Kconfig10
-rw-r--r--drivers/mtd/devices/Makefile1
-rw-r--r--drivers/mtd/devices/lart.c6
-rw-r--r--drivers/mtd/devices/m25p80.c137
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c4
-rw-r--r--drivers/mtd/devices/phram.c25
-rw-r--r--drivers/mtd/devices/slram.c2
-rw-r--r--drivers/mtd/devices/sst25l.c512
-rwxr-xr-x[-rw-r--r--]drivers/mtd/inftlcore.c2
-rw-r--r--drivers/mtd/maps/Kconfig12
-rw-r--r--drivers/mtd/maps/Makefile3
-rw-r--r--drivers/mtd/maps/gpio-addr-flash.c311
-rw-r--r--drivers/mtd/maps/physmap_of.c24
-rw-r--r--drivers/mtd/maps/plat-ram.c2
-rw-r--r--drivers/mtd/maps/pmcmsp-flash.c76
-rw-r--r--drivers/mtd/maps/uclinux.c8
-rw-r--r--drivers/mtd/mtdblock.c2
-rw-r--r--drivers/mtd/mtdconcat.c6
-rw-r--r--drivers/mtd/mtdcore.c4
-rw-r--r--drivers/mtd/mtdpart.c3
-rw-r--r--drivers/mtd/nand/Kconfig24
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/atmel_nand.c2
-rw-r--r--drivers/mtd/nand/cafe_nand.c2
-rw-r--r--drivers/mtd/nand/davinci_nand.c45
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c3
-rw-r--r--drivers/mtd/nand/mxc_nand.c16
-rw-r--r--drivers/mtd/nand/nand_base.c167
-rw-r--r--drivers/mtd/nand/nand_ecc.c31
-rw-r--r--drivers/mtd/nand/ndfc.c4
-rw-r--r--drivers/mtd/nand/omap2.c347
-rw-r--r--drivers/mtd/nand/orion_nand.c3
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c17
-rw-r--r--drivers/mtd/nand/sh_flctl.c5
-rw-r--r--drivers/mtd/nand/tmio_nand.c17
-rw-r--r--drivers/mtd/nand/txx9ndfmc.c52
-rw-r--r--drivers/mtd/nand/w90p910_nand.c382
-rw-r--r--drivers/mtd/ofpart.c21
-rw-r--r--drivers/mtd/onenand/Kconfig3
-rw-r--r--drivers/mtd/onenand/generic.c24
-rw-r--r--drivers/mtd/onenand/onenand_base.c20
-rw-r--r--drivers/mtd/tests/mtd_oobtest.c2
-rw-r--r--drivers/mtd/tests/mtd_pagetest.c12
-rw-r--r--fs/jffs2/background.c20
-rw-r--r--fs/jffs2/malloc.c4
-rw-r--r--include/linux/mtd/nand.h5
-rw-r--r--include/linux/mtd/nand_ecc.h6
-rw-r--r--include/linux/mtd/onenand.h8
-rw-r--r--include/linux/mtd/onenand_regs.h3
59 files changed, 2318 insertions, 250 deletions
diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
index 667c9bde869..80152cb567d 100644
--- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -1,18 +1,19 @@
-CFI or JEDEC memory-mapped NOR flash
+CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
Flash chips (Memory Technology Devices) are often used for solid state
file systems on embedded devices.
- - compatible : should contain the specific model of flash chip(s)
- used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range(s) of the flash chip(s)
+ - compatible : should contain the specific model of mtd chip(s)
+ used, if known, followed by either "cfi-flash", "jedec-flash"
+ or "mtd-ram".
+ - reg : Address range(s) of the mtd chip(s)
It's possible to (optionally) define multiple "reg" tuples so that
- non-identical NOR chips can be described in one flash node.
- - bank-width : Width (in bytes) of the flash bank. Equal to the
+ non-identical chips can be described in one node.
+ - bank-width : Width (in bytes) of the bank. Equal to the
device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip. If
+ - device-width : (optional) Width of a single mtd chip. If
omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
+ - #address-cells, #size-cells : Must be present if the device has
sub-nodes representing partitions (see below). In this case
both #address-cells and #size-cells must be equal to 1.
@@ -22,24 +23,24 @@ are defined:
- vendor-id : Contains the flash chip's vendor id (1 byte).
- device-id : Contains the flash chip's device id (1 byte).
-In addition to the information on the flash bank itself, the
+In addition to the information on the mtd bank itself, the
device tree may optionally contain additional information
-describing partitions of the flash address space. This can be
+describing partitions of the address space. This can be
used on platforms which have strong conventions about which
-portions of the flash are used for what purposes, but which don't
+portions of a flash are used for what purposes, but which don't
use an on-flash partition table such as RedBoot.
-Each partition is represented as a sub-node of the flash device.
+Each partition is represented as a sub-node of the mtd device.
Each node's name represents the name of the corresponding
-partition of the flash device.
+partition of the mtd device.
Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
+ - reg : The partition's offset and size within the mtd bank.
+ - label : (optional) The label / name for this partition.
If omitted, the label is taken from the node name (excluding
the unit address).
- read-only : (optional) This parameter, if present, is a hint to
- Linux that this flash partition should only be mounted
+ Linux that this partition should only be mounted
read-only. This is usually used for flash partitions
containing early-boot firmware images or data which should not
be clobbered.
@@ -78,3 +79,12 @@ Here an example with multiple "reg" tuples:
reg = <0 0x04000000>;
};
};
+
+An example using SRAM:
+
+ sram@2,0 {
+ compatible = "samsung,k6f1616u6a", "mtd-ram";
+ reg = <2 0 0x00200000>;
+ bank-width = <2>;
+ };
+
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7a2b54c7291..a1132288c70 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -87,7 +87,7 @@ static struct mtd_partition apollon_partitions[] = {
},
};
-static struct flash_platform_data apollon_flash_data = {
+static struct onenand_platform_data apollon_flash_data = {
.parts = apollon_partitions,
.nr_parts = ARRAY_SIZE(apollon_partitions),
};
@@ -99,7 +99,7 @@ static struct resource apollon_flash_resource[] = {
};
static struct platform_device apollon_onenand_device = {
- .name = "onenand",
+ .name = "onenand-flash",
.id = -1,
.dev = {
.platform_data = &apollon_flash_data,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f91934b2b09..15876828db2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -57,6 +57,11 @@
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
+#define PREFETCH_FIFOTHRESHOLD (0x40 << 8)
+#define CS_NUM_SHIFT 24
+#define ENABLE_PREFETCH (0x1 << 7)
+#define DMA_MPU_MODE 2
+
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -386,6 +391,63 @@ void gpmc_cs_free(int cs)
}
EXPORT_SYMBOL(gpmc_cs_free);
+/**
+ * gpmc_prefetch_enable - configures and starts prefetch transfer
+ * @cs: nand cs (chip select) number
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+int gpmc_prefetch_enable(int cs, int dma_mode,
+ unsigned int u32_count, int is_write)
+{
+ uint32_t prefetch_config1;
+
+ if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+ /* Set the amount of bytes to be prefetched */
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
+
+ /* Set dma/mpu mode, the prefetch read / post write and
+ * enable the engine. Set which cs is has requested for.
+ */
+ prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+ PREFETCH_FIFOTHRESHOLD |
+ ENABLE_PREFETCH |
+ (dma_mode << DMA_MPU_MODE) |
+ (0x1 & is_write));
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+ } else {
+ return -EBUSY;
+ }
+ /* Start the prefetch engine */
+ gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpmc_prefetch_enable);
+
+/**
+ * gpmc_prefetch_reset - disables and stops the prefetch engine
+ */
+void gpmc_prefetch_reset(void)
+{
+ /* Stop the PFPW engine */
+ gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
+
+ /* Reset/disable the PFPW engine */
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
+}
+EXPORT_SYMBOL(gpmc_prefetch_reset);
+
+/**
+ * gpmc_prefetch_status - reads prefetch status of engine
+ */
+int gpmc_prefetch_status(void)
+{
+ return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+}
+EXPORT_SYMBOL(gpmc_prefetch_status);
+
static void __init gpmc_mem_init(void)
{
int cs;
@@ -452,6 +514,5 @@ void __init gpmc_init(void)
l &= 0x03 << 3;
l |= (0x02 << 3) | (1 << 0);
gpmc_write_reg(GPMC_SYSCONFIG, l);
-
gpmc_mem_init();
}
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 921b16532ff..9c99cda77ba 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,10 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int dma_mode,
+ unsigned int u32_count, int is_write);
+extern void gpmc_prefetch_reset(void);
+extern int gpmc_prefetch_status(void);
extern void __init gpmc_init(void);
#endif
diff --git a/drivers/Makefile b/drivers/Makefile
index bc4205d2fc3..2a1d41f0500 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -42,6 +42,8 @@ obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
+obj-$(CONFIG_MTD) += mtd/
+obj-$(CONFIG_SPI) += spi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
@@ -50,8 +52,6 @@ obj-y += ieee1394/
obj-$(CONFIG_UIO) += uio/
obj-y += cdrom/
obj-y += auxdisplay/
-obj-$(CONFIG_MTD) += mtd/
-obj-$(CONFIG_SPI) += spi/
obj-$(CONFIG_PCCARD) += pcmcia/
obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index b8e35a0b4d7..e4ec3659759 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -25,6 +25,14 @@ config MTD_DEBUG_VERBOSE
help
Determines the verbosity level of the MTD debugging messages.
+config MTD_TESTS
+ tristate "MTD tests support"
+ depends on m
+ help
+ This option includes various MTD tests into compilation. The tests
+ should normally be compiled as kernel modules. The modules perform
+ various checks and verifications when loaded.
+
config MTD_CONCAT
tristate "MTD concatenating support"
help
@@ -45,14 +53,6 @@ config MTD_PARTITIONS
devices. Partitioning on NFTL 'devices' is a different - that's the
'normal' form of partitioning used on a block device.
-config MTD_TESTS
- tristate "MTD tests support"
- depends on m
- help
- This option includes various MTD tests into compilation. The tests
- should normally be compiled as kernel modules. The modules perform
- various checks and verifications when loaded.
-
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index d072ca5be68..cec7ab98b2a 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -239,7 +239,7 @@ static int parse_afs_partitions(struct mtd_info *mtd,
parts[idx].offset = img_ptr;
parts[idx].mask_flags = 0;
- printk(" mtd%d: at 0x%08x, %5dKB, %8u, %s\n",
+ printk(" mtd%d: at 0x%08x, %5lluKiB, %8u, %s\n",
idx, img_ptr, parts[idx].size / 1024,
iis.imageNumber, str);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 61ea833e090..94bb61e1904 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -282,16 +282,6 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param)
}
}
-static void fixup_M29W128G_write_buffer(struct mtd_info *mtd, void *param)
-{
- struct map_info *map = mtd->priv;
- struct cfi_private *cfi = map->fldrv_priv;
- if (cfi->cfiq->BufWriteTimeoutTyp) {
- pr_warning("Don't use write buffer on ST flash M29W128G\n");
- cfi->cfiq->BufWriteTimeoutTyp = 0;
- }
-}
-
static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
@@ -308,7 +298,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, },
{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, },
{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, },
- { CFI_MFR_ST, 0x227E, fixup_M29W128G_write_buffer, NULL, },
#if !FORCE_WORD_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 34d40e25d31..c5a84fda541 100644..100755
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
{
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+ /* M29W128G flashes require an additional reset command
+ when exit qry mode */
+ if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
}
EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index ccc4cfc7e4b..16bc2fa8128 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -111,6 +111,11 @@
#define I28F320B3B 0x8897
#define I28F640B3T 0x8898
#define I28F640B3B 0x8899
+#define I28F640C3B 0x88CD
+#define I28F160F3T 0x88F3
+#define I28F160F3B 0x88F4
+#define I28F160C3T 0x88C2
+#define I28F160C3B 0x88C3
#define I82802AB 0x00ad
#define I82802AC 0x00ac
@@ -1103,6 +1108,19 @@ static const struct amd_flash_info jedec_table[] = {
}
}, {
.mfr_id = MANUFACTURER_INTEL,
+ .dev_id = I28F640C3B,
+ .name = "Intel 28F640C3B",
+ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_UNNECESSARY,
+ .dev_size = SIZE_8MiB,
+ .cmd_set = P_ID_INTEL_STD,
+ .nr_regions = 2,
+ .regions = {
+ ERASEINFO(0x02000, 8),
+ ERASEINFO(0x10000, 127),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_INTEL,
.dev_id = I82802AB,
.name = "Intel 82802AB",
.devtypes = CFI_DEVICETYPE_X8,
@@ -1156,8 +1174,8 @@ static const struct amd_flash_info jedec_table[] = {
.mfr_id = MANUFACTURER_NEC,
.dev_id = UPD29F064115,
.name = "NEC uPD29F064115",
- .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
- .uaddr = MTD_UADDR_0x0555_0x02AA, /* ???? */
+ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
.dev_size = SIZE_8MiB,
.cmd_set = P_ID_AMD_STD,
.nr_regions = 3,
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 325fab92a62..c222514bb70 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ
help
This option enables FAST_READ access supported by ST M25Pxx.
+config MTD_SST25L
+ tristate "Support SST25L (non JEDEC) SPI Flash chips"
+ depends on SPI_MASTER
+ help
+ This enables access to the non JEDEC SST25L SPI flash chips, used
+ for program and data storage.
+
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning.
+
config MTD_SLRAM
tristate "Uncached system RAM"
help
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0993d5cf392..ab5c9b92ac8 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_SST25L) += sst25l.o
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 578de1c67bf..f4359fe7150 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -393,7 +393,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
* erase range is aligned with the erase size which is in
* effect here.
*/
- if (instr->addr & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+ if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1)))
+ return -EINVAL;
/* Remember the erase region we start on */
first = i;
@@ -409,7 +410,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
i--;
/* is the end aligned on a block boundary? */
- if ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+ if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)))
+ return -EINVAL;
addr = instr->addr;
len = instr->len;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 10ed195c0c1..00355862eba 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -44,6 +44,11 @@
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
+/* Used for SST flashes only. */
+#define OPCODE_BP 0x02 /* Byte program */
+#define OPCODE_WRDI 0x04 /* Write disable */
+#define OPCODE_AAI_WP 0xad /* Auto address increment word program */
+
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
@@ -132,6 +137,15 @@ static inline int write_enable(struct m25p *flash)
return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
}
+/*
+ * Send write disble instruction to the chip.
+ */
+static inline int write_disable(struct m25p *flash)
+{
+ u8 code = OPCODE_WRDI;
+
+ return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
+}
/*
* Service routine to read status register until ready, or timeout occurs.
@@ -454,6 +468,111 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
return 0;
}
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ struct spi_transfer t[2];
+ struct spi_message m;
+ size_t actual;
+ int cmd_sz, ret;
+
+ if (retlen)
+ *retlen = 0;
+
+ /* sanity checks */
+ if (!len)
+ return 0;
+
+ if (to + len > flash->mtd.size)
+ return -EINVAL;
+
+ spi_message_init(&m);
+ memset(t, 0, (sizeof t));
+
+ t[0].tx_buf = flash->command;
+ t[0].len = CMD_SIZE;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&flash->lock);
+
+ /* Wait until finished previous write command. */
+ ret = wait_till_ready(flash);
+ if (ret)
+ goto time_out;
+
+ write_enable(flash);
+
+ actual = to % 2;
+ /* Start write from odd address. */
+ if (actual) {
+ flash->command[0] = OPCODE_BP;
+ flash->command[1] = to >> 16;
+ flash->command[2] = to >> 8;
+ flash->command[3] = to;
+
+ /* write one byte. */
+ t[1].len = 1;
+ spi_sync(flash->spi, &m);
+ ret = wait_till_ready(flash);
+ if (ret)
+ goto time_out;
+ *retlen += m.actual_length - CMD_SIZE;
+ }
+ to += actual;
+
+ flash->command[0] = OPCODE_AAI_WP;
+ flash->command[1] = to >> 16;
+ flash->command[2] = to >> 8;
+ flash->command[3] = to;
+
+ /* Write out most of the data here. */
+ cmd_sz = CMD_SIZE;
+ for (; actual < len - 1; actual += 2) {
+ t[0].len = cmd_sz;
+ /* write two bytes. */
+ t[1].len = 2;
+ t[1].tx_buf = buf + actual;
+
+ spi_sync(flash->spi, &m);
+ ret = wait_till_ready(flash);
+ if (ret)
+ goto time_out;
+ *retlen += m.actual_length - cmd_sz;
+ cmd_sz = 1;
+ to += 2;
+ }
+ write_disable(flash);
+ ret = wait_till_ready(flash);
+ if (ret)
+ goto time_out;
+
+ /* Write out trailing byte if it exists. */
+ if (actual != len) {
+ write_enable(flash);
+ flash->command[0] = OPCODE_BP;
+ flash->command[1] = to >> 16;
+ flash->command[2] = to >> 8;
+ flash->command[3] = to;
+ t[0].len = CMD_SIZE;
+ t[1].len = 1;
+ t[1].tx_buf = buf + actual;
+
+ spi_sync(flash->spi, &m);
+ ret = wait_till_ready(flash);
+ if (ret)
+ goto time_out;
+ *retlen += m.actual_length - CMD_SIZE;
+ write_disable(flash);
+ }
+
+time_out:
+ mutex_unlock(&flash->lock);
+ return ret;
+}
/****************************************************************************/
@@ -501,7 +620,10 @@ static struct flash_info __devinitdata m25p_data [] = {
{ "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
/* Macronix */
+ { "mx25l3205d", 0xc22016, 0, 64 * 1024, 64, },
+ { "mx25l6405d", 0xc22017, 0, 64 * 1024, 128, },
{ "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+ { "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, },
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
@@ -511,14 +633,20 @@ static struct flash_info __devinitdata m25p_data [] = {
{ "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
{ "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
{ "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
- { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
+ { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
{ "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
+ { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, },
+ { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
{ "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
{ "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
{ "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
+ { "sst25wf512", 0xbf2501, 0, 64 * 1024, 1, SECT_4K, },
+ { "sst25wf010", 0xbf2502, 0, 64 * 1024, 2, SECT_4K, },
+ { "sst25wf020", 0xbf2503, 0, 64 * 1024, 4, SECT_4K, },
+ { "sst25wf040", 0xbf2504, 0, 64 * 1024, 8, SECT_4K, },
/* ST Microelectronics -- newer production may have feature updates */
{ "m25p05", 0x202010, 0, 32 * 1024, 2, },
@@ -667,7 +795,12 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.size = info->sector_size * info->n_sectors;
flash->mtd.erase = m25p80_erase;
flash->mtd.read = m25p80_read;
- flash->mtd.write = m25p80_write;
+
+ /* sst flash chips use AAI word program */
+ if (info->jedec_id >> 16 == 0xbf)
+ flash->mtd.write = sst_write;
+ else
+ flash->mtd.write = m25p80_write;
/* prefer "small sector" erase if possible */
if (info->flags & SECT_4K) {
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 43976aa4dbb..70a7369d321 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -401,7 +401,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
(void) dataflash_waitready(priv->spi);
-#ifdef CONFIG_MTD_DATAFLASH_VERIFY_WRITE
+#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY
/* (3) Compare to Buffer1 */
addr = pageaddr << priv->page_offset;
@@ -430,7 +430,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
} else
status = 0;
-#endif /* CONFIG_MTD_DATAFLASH_VERIFY_WRITE */
+#endif /* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */
remaining = remaining - writelen;
pageaddr++;
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 088fbb7595b..1696bbecaa7 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -14,6 +14,9 @@
* Example:
* phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
*/
+
+#define pr_fmt(fmt) "phram: " fmt
+
#include <asm/io.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -23,8 +26,6 @@
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
-#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args)
-
struct phram_mtd_list {
struct mtd_info mtd;
struct list_head list;
@@ -132,7 +133,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
ret = -EIO;
new->mtd.priv = ioremap(start, len);
if (!new->mtd.priv) {
- ERROR("ioremap failed\n");
+ pr_err("ioremap failed\n");
goto out1;
}
@@ -152,7 +153,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
ret = -EAGAIN;
if (add_mtd_device(&new->mtd)) {
- ERROR("Failed to register new device\n");
+ pr_err("Failed to register new device\n");
goto out2;
}
@@ -227,8 +228,8 @@ static inline void kill_final_newline(char *str)
#define parse_err(fmt, args...) do { \
- ERROR(fmt , ## args); \
- return 0; \
+ pr_err(fmt , ## args); \
+ return 1; \
} while (0)
static int phram_setup(const char *val, struct kernel_param *kp)
@@ -256,12 +257,8 @@ static int phram_setup(const char *val, struct kernel_param *kp)
parse_err("not enough arguments\n");
ret = parse_name(&name, token[0]);
- if (ret == -ENOMEM)
- parse_err("out of memory\n");
- if (ret == -ENOSPC)
- parse_err("name too long\n");
if (ret)
- return 0;
+ return ret;
ret = parse_num32(&start, token[1]);
if (ret) {
@@ -275,9 +272,11 @@ static int phram_setup(const char *val, struct kernel_param *kp)
parse_err("illegal device length\n");
}
- register_device(name, start, len);
+ ret = register_device(name, start, len);
+ if (!ret)
+ pr_info("%s device: %#x at %#x\n", name, len, start);
- return 0;
+ return ret;
}
module_param_call(phram, phram_setup, NULL, NULL, 000);
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 00248e81ecd..239500b0b75 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -341,7 +341,7 @@ static int init_slram(void)
#else
int count;
- for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS);
+ for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count];
count++) {
}
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
new file mode 100644
index 00000000000..c2baf3353f8
--- /dev/null
+++ b/drivers/mtd/devices/sst25l.c
@@ -0,0 +1,512 @@
+/*
+ * sst25l.c
+ *
+ * Driver for SST25L SPI Flash chips
+ *
+ * Copyright © 2009 Bluewater Systems Ltd
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+/* Erases can take up to 3 seconds! */
+#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
+
+#define SST25L_CMD_WRSR 0x01 /* Write status register */
+#define SST25L_CMD_WRDI 0x04 /* Write disable */
+#define SST25L_CMD_RDSR 0x05 /* Read status register */
+#define SST25L_CMD_WREN 0x06 /* Write enable */
+#define SST25L_CMD_READ 0x03 /* High speed read */
+
+#define SST25L_CMD_EWSR 0x50 /* Enable write status register */
+#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */
+#define SST25L_CMD_READ_ID 0x90 /* Read device ID */
+#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */
+
+#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */
+#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */
+#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */
+#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */
+
+struct sst25l_flash {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct mtd_info mtd;
+
+ int partitioned;
+};
+
+struct flash_info {
+ const char *name;
+ uint16_t device_id;
+ unsigned page_size;
+ unsigned nr_pages;
+ unsigned erase_size;
+};
+
+#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
+
+static struct flash_info __initdata sst25l_flash_info[] = {
+ {"sst25lf020a", 0xbf43, 256, 1024, 4096},
+ {"sst25lf040a", 0xbf44, 256, 2048, 4096},
+};
+
+static int sst25l_status(struct sst25l_flash *flash, int *status)
+{
+ unsigned char command, response;
+ int err;
+
+ command = SST25L_CMD_RDSR;
+ err = spi_write_then_read(flash->spi, &command, 1, &response, 1);
+ if (err < 0)
+ return err;
+
+ *status = response;
+ return 0;
+}
+
+static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
+{
+ unsigned char command[2];
+ int status, err;
+
+ command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
+ err = spi_write(flash->spi, command, 1);
+ if (err)
+ return err;
+
+ command[0] = SST25L_CMD_EWSR;
+ err = spi_write(flash->spi, command, 1);
+ if (err)
+ return err;
+
+ command[0] = SST25L_CMD_WRSR;
+ command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
+ err = spi_write(flash->spi, command, 2);
+ if (err)
+ return err;
+
+ if (enable) {
+ err = sst25l_status(flash, &status);
+ if (err)
+ return err;
+ if (!(status & SST25L_STATUS_WREN))
+ return -EROFS;
+ }
+
+ return 0;
+}
+
+static int sst25l_wait_till_ready(struct sst25l_flash *flash)
+{
+ unsigned long deadline;
+ int status, err;
+
+ deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+ do {
+ err = sst25l_status(flash, &status);
+ if (err)
+ return err;
+ if (!(status & SST25L_STATUS_BUSY))
+ return 0;
+
+ cond_resched();
+ } while (!time_after_eq(jiffies, deadline));
+
+ return -ETIMEDOUT;
+}
+
+static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
+{
+ unsigned char command[4];
+ int err;
+
+ err = sst25l_write_enable(flash, 1);
+ if (err)
+ return err;
+
+ command[0] = SST25L_CMD_SECTOR_ERASE;
+ command[1] = offset >> 16;
+ command[2] = offset >> 8;
+ command[3] = offset;
+ err = spi_write(flash->spi, command, 4);
+ if (err)
+ return err;
+
+ err = sst25l_wait_till_ready(flash);
+ if (err)
+ return err;
+
+ return sst25l_write_enable(flash, 0);
+}
+
+static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct sst25l_flash *flash = to_sst25l_flash(mtd);
+ uint32_t addr, end;
+ int err;
+
+ /* Sanity checks */
+ if (instr->addr + instr->len > flash->mtd.size)
+ return -EINVAL;
+
+ if ((uint32_t)instr->len % mtd->erasesize)
+ return -EINVAL;
+
+ if ((uint32_t)instr->addr % mtd->erasesize)
+ return -EINVAL;
+
+ addr = instr->addr;
+ end = addr + instr->len;
+
+ mutex_lock(&flash->lock);
+
+ err = sst25l_wait_till_ready(flash);
+ if (err) {
+ mutex_unlock(&flash->lock);
+ return err;
+ }
+
+ while (addr < end) {
+ err = sst25l_erase_sector(flash, addr);
+ if (err) {
+ mutex_unlock(&flash->lock);
+ instr->state = MTD_ERASE_FAILED;
+ dev_err(&flash->spi->dev, "Erase failed\n");
+ return err;
+ }
+
+ addr += mtd->erasesize;
+ }
+
+ mutex_unlock(&flash->lock);
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+}
+
+static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, unsigned char *buf)
+{
+ struct sst25l_flash *flash = to_sst25l_flash(mtd);
+ struct spi_transfer transfer[2];
+ struct spi_message message;
+ unsigned char command[4];
+ int ret;
+
+ /* Sanity checking */
+ if (len == 0)
+ return 0;
+
+ if (from + len > flash->mtd.size)
+ return -EINVAL;
+
+ if (retlen)
+ *retlen = 0;
+
+ spi_message_init(&message);
+ memset(&transfer, 0, sizeof(transfer));
+
+ command[0] = SST25L_CMD_READ;
+ command[1] = from >> 16;
+ command[2] = from >> 8;
+ command[3] = from;
+
+ transfer[0].tx_buf = command;
+ transfer[0].len = sizeof(command);
+ spi_message_add_tail(&transfer[0], &message);
+
+ transfer[1].rx_buf = buf;
+ transfer[1].len = len;
+ spi_message_add_tail(&transfer[1], &message);
+
+ mutex_lock(&flash->lock);
+
+ /* Wait for previous write/erase to complete */
+ ret = sst25l_wait_till_ready(flash);
+ if (ret) {
+ mutex_unlock(&flash->lock);
+ return ret;
+ }
+
+ spi_sync(flash->spi, &message);
+
+ if (retlen && message.actual_length > sizeof(command))
+ *retlen += message.actual_length - sizeof(command);
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const unsigned char *buf)
+{
+ struct sst25l_flash *flash = to_sst25l_flash(mtd);
+ int i, j, ret, bytes, copied = 0;
+ unsigned char command[5];
+
+ /* Sanity checks */
+ if (!len)
+ return 0;
+
+ if (to + len > flash->mtd.size)
+ return -EINVAL;
+
+ if ((uint32_t)to % mtd->writesize)
+ return -EINVAL;
+
+ mutex_lock(&flash->lock);
+
+ ret = sst25l_write_enable(flash, 1);
+ if (ret)
+ goto out;
+
+ for (i = 0; i < len; i += mtd->writesize) {
+ ret = sst25l_wait_till_ready(flash);
+ if (ret)
+ goto out;
+
+ /* Write the first byte of the page */
+ command[0] = SST25L_CMD_AAI_PROGRAM;
+ command[1] = (to + i) >> 16;
+ command[2] = (to + i) >> 8;
+ command[3] = (to + i);
+ command[4] = buf[i];
+ ret = spi_write(flash->spi, command, 5);
+ if (ret < 0)
+ goto out;
+ copied++;
+
+ /*
+ * Write the remaining bytes using auto address
+ * increment mode
+ */
+ bytes = min_t(uint32_t, mtd->writesize, len - i);
+ for (j = 1; j < bytes; j++, copied++) {
+ ret = sst25l_wait_till_ready(flash);
+ if (ret)
+ goto out;
+
+ command[1] = buf[i + j];
+ ret = spi_write(flash->spi, command, 2);
+ if (ret)
+ goto out;
+ }
+ }
+
+out:
+ ret = sst25l_write_enable(flash, 0);
+
+ if (retlen)
+ *retlen = copied;
+
+ mutex_unlock(&flash->lock);
+ return ret;
+}
+
+static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
+{
+ struct flash_info *flash_info = NULL;
+ unsigned char command[4], response;
+ int i, err;
+ uint16_t id;
+
+ command[0] = SST25L_CMD_READ_ID;
+ command[1] = 0;
+ command[2] = 0;
+ command[3] = 0;
+ err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+ if (err < 0) {
+ dev_err(&spi->dev, "error reading device id msb\n");
+ return NULL;
+ }
+
+ id = response << 8;
+
+ command[0] = SST25L_CMD_READ_ID;
+ command[1] = 0;
+ command[2] = 0;
+ command[3] = 1;
+ err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+ if (err < 0) {
+ dev_err(&spi->dev, "error reading device id lsb\n");
+ return NULL;
+ }
+
+ id |= response;
+
+ for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
+ if (sst25l_flash_info[i].device_id == id)
+ flash_info = &sst25l_flash_info[i];
+
+ if (!flash_info)
+ dev_err(&spi->dev, "unknown id %.4x\n", id);
+
+ return flash_info;
+}
+
+static int __init sst25l_probe(struct spi_device *spi)
+{
+ struct flash_info *flash_info;
+ struct sst25l_flash *flash;
+ struct flash_platform_data *data;
+ int ret, i;
+
+ flash_info = sst25l_match_device(spi);
+ if (!flash_info)
+ return -ENODEV;
+
+ flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ flash->spi = spi;
+ mutex_init(&flash->lock);
+ dev_set_drvdata(&spi->dev, flash);
+
+ data = spi->dev.platform_data;
+ if (data && data->name)
+ flash->mtd.name = data->name;
+ else
+ flash->mtd.name = dev_name(&spi->dev);
+
+ flash->mtd.type = MTD_NORFLASH;
+ flash->mtd.flags = MTD_CAP_NORFLASH;
+ flash->mtd.erasesize = flash_info->erase_size;
+ flash->mtd.writesize = flash_info->page_size;
+ flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
+ flash->mtd.erase = sst25l_erase;
+ flash->mtd.read = sst25l_read;
+ flash->mtd.write = sst25l_write;
+
+ dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
+ (long long)flash->mtd.size >> 10);
+
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+ flash->mtd.name,
+ (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
+ flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+ flash->mtd.numeraseregions);
+
+ if (flash->mtd.numeraseregions)
+ for (i = 0; i < flash->mtd.numeraseregions; i++)
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+ ".erasesize = 0x%.8x (%uKiB), "
+ ".numblocks = %d }\n",
+ i, (long long)flash->mtd.eraseregions[i].offset,
+ flash->mtd.eraseregions[i].erasesize,
+ flash->mtd.eraseregions[i].erasesize / 1024,
+ flash->mtd.eraseregions[i].numblocks);
+
+ if (mtd_has_partitions()) {
+ struct mtd_partition *parts = NULL;
+ int nr_parts = 0;
+
+ if (mtd_has_cmdlinepart()) {
+ static const char *part_probes[] =
+ {"cmdlinepart", NULL};
+
+ nr_parts = parse_mtd_partitions(&flash->mtd,
+ part_probes,
+ &parts, 0);
+ }
+
+ if (nr_parts <= 0 && data && data->parts) {
+ parts = data->parts;
+ nr_parts = data->nr_parts;
+ }
+
+ if (nr_parts > 0) {
+ for (i = 0; i < nr_parts; i++) {
+ DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
+ "{.name = %s, .offset = 0x%llx, "
+ ".size = 0x%llx (%lldKiB) }\n",
+ i, parts[i].name,
+ (long long)parts[i].offset,
+ (long long)parts[i].size,
+ (long long)(parts[i].size >> 10));
+ }
+
+ flash->partitioned = 1;
+ return add_mtd_partitions(&flash->mtd,
+ parts, nr_parts);
+ }
+
+ } else if (data->nr_parts) {
+ dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
+ data->nr_parts, data->name);
+ }
+
+ ret = add_mtd_device(&flash->mtd);
+ if (ret == 1) {
+ kfree(flash);
+ dev_set_drvdata(&spi->dev, NULL);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int __exit sst25l_remove(struct spi_device *spi)
+{
+ struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
+ int ret;
+
+ if (mtd_has_partitions() && flash->partitioned)
+ ret = del_mtd_partitions(&flash->mtd);
+ else
+ ret = del_mtd_device(&flash->mtd);
+ if (ret == 0)
+ kfree(flash);
+ return ret;
+}
+
+static struct spi_driver sst25l_driver = {
+ .driver = {
+ .name = "sst25l",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = sst25l_probe,
+ .remove = __exit_p(sst25l_remove),
+};
+
+static int __init sst25l_init(void)
+{
+ return spi_register_driver(&sst25l_driver);
+}
+
+static void __exit sst25l_exit(void)
+{
+ spi_unregister_driver(&sst25l_driver);
+}
+
+module_init(sst25l_init);
+module_exit(sst25l_exit);
+
+MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
+MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
+ "Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index d8cf29c01cc..8aca5523a33 100644..100755
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -550,7 +550,7 @@ hitused:
* waiting to be picked up. We're going to have to fold
* a chain to make room.
*/
- thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL);
+ thisEUN = INFTL_makefreeblock(inftl, block);
/*
* Hopefully we free something, lets try again.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7a58bd5522f..3a9a960644b 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -484,9 +484,19 @@ config MTD_BFIN_ASYNC
If compiled as a module, it will be called bfin-async-flash.
+config MTD_GPIO_ADDR
+ tristate "GPIO-assisted Flash Chip Support"
+ depends on MTD_COMPLEX_MAPPINGS
+ select MTD_PARTITIONS
+ help
+ Map driver which allows flashes to be partially physically addressed
+ and assisted by GPIOs.
+
+ If compiled as a module, it will be called gpio-addr-flash.
+
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
- depends on MTD_PARTITIONS && MTD_RAM && !MMU
+ depends on MTD_PARTITIONS && MTD_RAM=y && !MMU
help
Map driver to support image based filesystems for uClinux.
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 5beb0662d72..1d5cf863672 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,5 +58,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
-obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
-obj-$(CONFIG_MTD_VMU) += vmu-flash.o
+obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
new file mode 100644
index 00000000000..44ef9a49a86
--- /dev/null
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -0,0 +1,311 @@
+/*
+ * drivers/mtd/maps/gpio-addr-flash.c
+ *
+ * Handle the case where a flash device is mostly addressed using physical
+ * line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
+ * to a 2MiB memory range and use the GPIOs to select a particular range.
+ *
+ * Copyright © 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright © 2005-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "gpio-addr-flash"
+#define PFX DRIVER_NAME ": "
+
+/**
+ * struct async_state - keep GPIO flash state
+ * @mtd: MTD state for this mapping
+ * @map: MTD map state for this flash
+ * @gpio_count: number of GPIOs used to address
+ * @gpio_addrs: array of GPIOs to twiddle
+ * @gpio_values: cached GPIO values
+ * @win_size: dedicated memory size (if no GPIOs)
+ */
+struct async_state {
+ struct mtd_info *mtd;
+ struct map_info map;
+ size_t gpio_count;
+ unsigned *gpio_addrs;
+ int *gpio_values;
+ unsigned long win_size;
+};
+#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
+
+/**
+ * gf_set_gpios() - set GPIO address lines to access specified flash offset
+ * @state: GPIO flash state
+ * @ofs: desired offset to access
+ *
+ * Rather than call the GPIO framework every time, cache the last-programmed
+ * value. This speeds up sequential accesses (which are by far the most common
+ * type). We rely on the GPIO framework to treat non-zero value as high so
+ * that we don't have to normalize the bits.
+ */
+static void gf_set_gpios(struct async_state *state, unsigned long ofs)
+{
+ size_t i = 0;
+ int value;
+ ofs /= state->win_size;
+ do {
+ value = ofs & (1 << i);
+ if (state->gpio_values[i] != value) {
+ gpio_set_value(state->gpio_addrs[i], value);
+ state->gpio_values[i] = value;
+ }
+ } while (++i < state->gpio_count);
+}
+
+/**
+ * gf_read() - read a word at the specified offset
+ * @map: MTD map state
+ * @ofs: desired offset to read
+ */
+static map_word gf_read(struct map_info *map, unsigned long ofs)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+ uint16_t word;
+ map_word test;
+
+ gf_set_gpios(state, ofs);
+
+ word = readw(map->virt + (ofs % state->win_size));
+ test.x[0] = word;
+ return test;
+}
+
+/**
+ * gf_copy_from() - copy a chunk of data from the flash
+ * @map: MTD map state
+ * @to: memory to copy to
+ * @from: flash offset to copy from
+ * @len: how much to copy
+ *
+ * We rely on the MTD layer to chunk up copies such that a single request here
+ * will not cross a window size. This allows us to only wiggle the GPIOs once
+ * before falling back to a normal memcpy. Reading the higher layer code shows
+ * that this is indeed the case, but add a BUG_ON() to future proof.
+ */
+static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+
+ gf_set_gpios(state, from);
+
+ /* BUG if operation crosses the win_size */
+ BUG_ON(!((from + len) % state->win_size <= (from + len)));
+
+ /* operation does not cross the win_size, so one shot it */
+ memcpy_fromio(to, map->virt + (from % state->win_size), len);
+}
+
+/**
+ * gf_write() - write a word at the specified offset
+ * @map: MTD map state
+ * @ofs: desired offset to write
+ */
+static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+ uint16_t d;
+
+ gf_set_gpios(state, ofs);
+
+ d = d1.x[0];
+ writew(d, map->virt + (ofs % state->win_size));
+}
+
+/**
+ * gf_copy_to() - copy a chunk of data to the flash
+ * @map: MTD map state
+ * @to: flash offset to copy to
+ * @from: memory to copy from
+ * @len: how much to copy
+ *
+ * See gf_copy_from() caveat.
+ */
+static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+
+ gf_set_gpios(state, to);
+
+ /* BUG if operation crosses the win_size */
+ BUG_ON(!((to + len) % state->win_size <= (to + len)));
+
+ /* operation does not cross the win_size, so one shot it */
+ memcpy_toio(map->virt + (to % state->win_size), from, len);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+/**
+ * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
+ * @pdev: platform device
+ *
+ * The platform resource layout expected looks something like:
+ * struct mtd_partition partitions[] = { ... };
+ * struct physmap_flash_data flash_data = { ... };
+ * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... };
+ * struct resource flash_resource[] = {
+ * {
+ * .name = "cfi_probe",
+ * .start = 0x20000000,
+ * .end = 0x201fffff,
+ * .flags = IORESOURCE_MEM,
+ * }, {
+ * .start = (unsigned long)flash_gpios,
+ * .end = ARRAY_SIZE(flash_gpios),
+ * .flags = IORESOURCE_IRQ,
+ * }
+ * };
+ * struct platform_device flash_device = {
+ * .name = "gpio-addr-flash",
+ * .dev = { .platform_data = &flash_data, },
+ * .num_resources = ARRAY_SIZE(flash_resource),
+ * .resource = flash_resource,
+ * ...
+ * };
+ */
+static int __devinit gpio_flash_probe(struct platform_device *pdev)
+{
+ int ret;
+ size_t i, arr_size;
+ struct physmap_flash_data *pdata;
+ struct resource *memory;
+ struct resource *gpios;
+ struct async_state *state;
+
+ pdata = pdev->dev.platform_data;
+ memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (!memory || !gpios || !gpios->end)
+ return -EINVAL;
+
+ arr_size = sizeof(int) * gpios->end;
+ state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ state->gpio_count = gpios->end;
+ state->gpio_addrs = (void *)gpios->start;
+ state->gpio_values = (void *)(state + 1);
+ state->win_size = memory->end - memory->start + 1;
+ memset(state->gpio_values, 0xff, arr_size);
+
+ state->map.name = DRIVER_NAME;
+ state->map.read = gf_read;
+ state->map.copy_from = gf_copy_from;
+ state->map.write = gf_write;
+ state->map.copy_to = gf_copy_to;
+ state->map.bankwidth = pdata->width;
+ state->map.size = state->win_size * (1 << state->gpio_count);
+ state->map.virt = (void __iomem *)memory->start;
+ state->map.phys = NO_XIP;
+ state->map.map_priv_1 = (unsigned long)state;
+
+ platform_set_drvdata(pdev, state);
+
+ i = 0;
+ do {
+ if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) {
+ pr_devinit(KERN_ERR PFX "failed to request gpio %d\n",
+ state->gpio_addrs[i]);
+ while (i--)
+ gpio_free(state->gpio_addrs[i]);
+ kfree(state);
+ return -EBUSY;
+ }
+ gpio_direction_output(state->gpio_addrs[i], 0);
+ } while (++i < state->gpio_count);
+
+ pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n",
+ state->map.bankwidth * 8);
+ state->mtd = do_map_probe(memory->name, &state->map);
+ if (!state->mtd) {
+ for (i = 0; i < state->gpio_count; ++i)
+ gpio_free(state->gpio_addrs[i]);
+ kfree(state);
+ return -ENXIO;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+ if (ret > 0) {
+ pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
+ add_mtd_partitions(state->mtd, pdata->parts, ret);
+ kfree(pdata->parts);
+
+ } else if (pdata->nr_parts) {
+ pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
+ add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+ } else
+#endif
+ {
+ pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
+ add_mtd_device(state->mtd);
+ }
+
+ return 0;
+}
+
+static int __devexit gpio_flash_remove(struct platform_device *pdev)
+{
+ struct async_state *state = platform_get_drvdata(pdev);
+ size_t i = 0;
+ do {
+ gpio_free(state->gpio_addrs[i]);
+ } while (++i < state->gpio_count);
+#ifdef CONFIG_MTD_PARTITIONS
+ del_mtd_partitions(state->mtd);
+#endif
+ map_destroy(state->mtd);
+ kfree(state);
+ return 0;
+}
+
+static struct platform_driver gpio_flash_driver = {
+ .probe = gpio_flash_probe,
+ .remove = __devexit_p(gpio_flash_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init gpio_flash_init(void)
+{
+ return platform_driver_register(&gpio_flash_driver);
+}
+module_init(gpio_flash_init);
+
+static void __exit gpio_flash_exit(void)
+{
+ platform_driver_unregister(&gpio_flash_driver);
+}
+module_exit(gpio_flash_exit);
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 39d357b2eb4..61e4eb48bb2 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -190,6 +190,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
const u32 *p;
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
+ resource_size_t res_size;
reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
@@ -204,7 +205,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
dev_err(&dev->dev, "Malformed reg property on %s\n",
dev->node->full_name);
err = -EINVAL;
- goto err_out;
+ goto err_flash_remove;
}
count /= reg_tuple_size;
@@ -212,14 +213,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
info = kzalloc(sizeof(struct of_flash) +
sizeof(struct of_flash_list) * count, GFP_KERNEL);
if (!info)
- goto err_out;
-
- mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
- if (!info)
- goto err_out;
+ goto err_flash_remove;
dev_set_drvdata(&dev->dev, info);
+ mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
+ if (!mtd_list)
+ goto err_flash_remove;
+
for (i = 0; i < count; i++) {
err = -ENXIO;
if (of_address_to_resource(dp, i, &res)) {
@@ -233,8 +234,8 @@ static int __devinit of_flash_probe(struct of_device *dev,
(unsigned long long)res.end);
err = -EBUSY;
- info->list[i].res = request_mem_region(res.start, res.end -
- res.start + 1,
+ res_size = resource_size(&res);
+ info->list[i].res = request_mem_region(res.start, res_size,
dev_name(&dev->dev));
if (!info->list[i].res)
goto err_out;
@@ -249,7 +250,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
info->list[i].map.name = dev_name(&dev->dev);
info->list[i].map.phys = res.start;
- info->list[i].map.size = res.end - res.start + 1;
+ info->list[i].map.size = res_size;
info->list[i].map.bankwidth = *width;
err = -ENOMEM;
@@ -338,6 +339,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
err_out:
kfree(mtd_list);
+err_flash_remove:
of_flash_remove(dev);
return err;
@@ -360,6 +362,10 @@ static struct of_device_id of_flash_match[] = {
.data = (void *)"jedec_probe",
},
{
+ .compatible = "mtd-ram",
+ .data = (void *)"map_ram",
+ },
+ {
.type = "rom",
.compatible = "direct-mapped"
},
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 49c9ece7647..dafb91944e7 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -175,7 +175,7 @@ static int platram_probe(struct platform_device *pdev)
/* setup map parameters */
info->map.phys = res->start;
- info->map.size = (res->end - res->start) + 1;
+ info->map.size = resource_size(res);
info->map.name = pdata->mapname != NULL ?
(char *)pdata->mapname : (char *)pdev->name;
info->map.bankwidth = pdata->bankwidth;
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index 4768bd5459d..c8fd8da4bc8 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -50,7 +50,7 @@ static int fcnt;
static int __init init_msp_flash(void)
{
- int i, j;
+ int i, j, ret = -ENOMEM;
int offset, coff;
char *env;
int pcnt;
@@ -75,14 +75,16 @@ static int __init init_msp_flash(void)
printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL);
+ if (!msp_flash)
+ return -ENOMEM;
+
msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
+ if (!msp_parts)
+ goto free_msp_flash;
+
msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL);
- if (!msp_flash || !msp_parts || !msp_maps) {
- kfree(msp_maps);
- kfree(msp_parts);
- kfree(msp_flash);
- return -ENOMEM;
- }
+ if (!msp_maps)
+ goto free_msp_parts;
/* loop over the flash devices, initializing each */
for (i = 0; i < fcnt; i++) {
@@ -100,13 +102,18 @@ static int __init init_msp_flash(void)
msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition),
GFP_KERNEL);
+ if (!msp_parts[i])
+ goto cleanup_loop;
/* now initialize the devices proper */
flash_name[5] = '0' + i;
env = prom_getenv(flash_name);
- if (sscanf(env, "%x:%x", &addr, &size) < 2)
- return -ENXIO;
+ if (sscanf(env, "%x:%x", &addr, &size) < 2) {
+ ret = -ENXIO;
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
addr = CPHYSADDR(addr);
printk(KERN_NOTICE
@@ -122,13 +129,23 @@ static int __init init_msp_flash(void)
*/
if (size > CONFIG_MSP_FLASH_MAP_LIMIT)
size = CONFIG_MSP_FLASH_MAP_LIMIT;
+
msp_maps[i].virt = ioremap(addr, size);
+ if (msp_maps[i].virt == NULL) {
+ ret = -ENXIO;
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
+
msp_maps[i].bankwidth = 1;
- msp_maps[i].name = strncpy(kmalloc(7, GFP_KERNEL),
- flash_name, 7);
+ msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+ if (!msp_maps[i].name) {
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
- if (msp_maps[i].virt == NULL)
- return -ENXIO;
+ msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
for (j = 0; j < pcnt; j++) {
part_name[5] = '0' + i;
@@ -136,8 +153,14 @@ static int __init init_msp_flash(void)
env = prom_getenv(part_name);
- if (sscanf(env, "%x:%x:%n", &offset, &size, &coff) < 2)
- return -ENXIO;
+ if (sscanf(env, "%x:%x:%n", &offset, &size,
+ &coff) < 2) {
+ ret = -ENXIO;
+ kfree(msp_maps[i].name);
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
msp_parts[i][j].size = size;
msp_parts[i][j].offset = offset;
@@ -152,18 +175,37 @@ static int __init init_msp_flash(void)
add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt);
} else {
printk(KERN_ERR "map probe failed for flash\n");
- return -ENXIO;
+ ret = -ENXIO;
+ kfree(msp_maps[i].name);
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
}
}
return 0;
+
+cleanup_loop:
+ while (i--) {
+ del_mtd_partitions(msp_flash[i]);
+ map_destroy(msp_flash[i]);
+ kfree(msp_maps[i].name);
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ }
+ kfree(msp_maps);
+free_msp_parts:
+ kfree(msp_parts);
+free_msp_flash:
+ kfree(msp_flash);
+ return ret;
}
static void __exit cleanup_msp_flash(void)
{
int i;
- for (i = 0; i < sizeof(msp_flash) / sizeof(struct mtd_info **); i++) {
+ for (i = 0; i < fcnt; i++) {
del_mtd_partitions(msp_flash[i]);
map_destroy(msp_flash[i]);
iounmap((void *)msp_maps[i].virt);
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index d4314fb8821..35009294b43 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -89,7 +89,11 @@ static int __init uclinux_mtd_init(void)
mtd->priv = mapp;
uclinux_ram_mtdinfo = mtd;
+#ifdef CONFIG_MTD_PARTITIONS
add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS);
+#else
+ add_mtd_device(mtd);
+#endif
return(0);
}
@@ -99,7 +103,11 @@ static int __init uclinux_mtd_init(void)
static void __exit uclinux_mtd_cleanup(void)
{
if (uclinux_ram_mtdinfo) {
+#ifdef CONFIG_MTD_PARTITIONS
del_mtd_partitions(uclinux_ram_mtdinfo);
+#else
+ del_mtd_device(uclinux_ram_mtdinfo);
+#endif
map_destroy(uclinux_ram_mtdinfo);
uclinux_ram_mtdinfo = NULL;
}
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 2d70295a5fa..9f41b1a853c 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -84,7 +84,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
remove_wait_queue(&wait_q, &wait);
/*
- * Next, writhe data to flash.
+ * Next, write the data to flash.
*/
ret = mtd->write(mtd, pos, len, &retlen, buf);
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 792b547786b..db6de74082a 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -427,7 +427,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
* to-be-erased area begins. Verify that the starting
* offset is aligned to this region's erase size:
*/
- if (instr->addr & (erase_regions[i].erasesize - 1))
+ if (i < 0 || instr->addr & (erase_regions[i].erasesize - 1))
return -EINVAL;
/*
@@ -440,8 +440,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
/*
* check if the ending offset is aligned to this region's erase size
*/
- if ((instr->addr + instr->len) & (erase_regions[i].erasesize -
- 1))
+ if (i < 0 || ((instr->addr + instr->len) &
+ (erase_regions[i].erasesize - 1)))
return -EINVAL;
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 69007a6eff5..467a4f177bf 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -213,11 +213,11 @@ static struct attribute *mtd_attrs[] = {
NULL,
};
-struct attribute_group mtd_group = {
+static struct attribute_group mtd_group = {
.attrs = mtd_attrs,
};
-const struct attribute_group *mtd_groups[] = {
+static const struct attribute_group *mtd_groups[] = {
&mtd_group,
NULL,
};
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 742504ea96f..b8043a9ba32 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -453,7 +453,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
;
/* The loop searched for the region _behind_ the first one */
- i--;
+ if (i > 0)
+ i--;
/* Pick biggest erasesize */
for (; i < max && regions[i].offset < end; i++) {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ce96c091f01..2c9a0ed4aed 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -80,6 +80,23 @@ config MTD_NAND_OMAP2
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+config MTD_NAND_OMAP_PREFETCH
+ bool "GPMC prefetch support for NAND Flash device"
+ depends on MTD_NAND && MTD_NAND_OMAP2
+ default y
+ help
+ The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
+ to improve the performance.
+
+config MTD_NAND_OMAP_PREFETCH_DMA
+ depends on MTD_NAND_OMAP_PREFETCH
+ bool "DMA mode"
+ default n
+ help
+ The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
+ or in DMA interrupt mode.
+ Say y for DMA mode or MPU mode will be used
+
config MTD_NAND_TS7250
tristate "NAND Flash device on TS-7250 board"
depends on MACH_TS72XX
@@ -452,4 +469,11 @@ config MTD_NAND_SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
+config MTD_NAND_W90P910
+ tristate "Support for NAND on w90p910 evaluation board."
+ depends on ARCH_W90X900 && MTD_PARTITIONS
+ help
+ This enables the driver for the NAND Flash on evaluation board based
+ on w90p910.
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f3a786b3cff..4f7b1890f83 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -40,5 +40,6 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 20c828ba940..f8e9975c86e 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -218,7 +218,7 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
* buf: buffer to store read data
*/
static int atmel_nand_read_page(struct mtd_info *mtd,
- struct nand_chip *chip, uint8_t *buf)
+ struct nand_chip *chip, uint8_t *buf, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 29acd06b1c3..a70f40e161d 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -381,7 +381,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
* we need a special oob layout and handling.
*/
static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
struct cafe_priv *cafe = mtd->priv;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 0fad6487e6f..f13f5b9afaf 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -348,6 +348,12 @@ compare:
if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
return 0;
+ /*
+ * Clear any previous address calculation by doing a dummy read of an
+ * error address register.
+ */
+ davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET);
+
/* Start address calculation, and wait for it to complete.
* We _could_ start reading more data while this is working,
* to speed up the overall page read.
@@ -359,8 +365,10 @@ compare:
switch ((fsr >> 8) & 0x0f) {
case 0: /* no error, should not happen */
+ davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return 0;
case 1: /* five or more errors detected */
+ davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return -EIO;
case 2: /* error addresses computed */
case 3:
@@ -500,6 +508,26 @@ static struct nand_ecclayout hwecc4_small __initconst = {
},
};
+/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_2048 __initconst = {
+ .eccbytes = 40,
+ .eccpos = {
+ /* at the end of spare sector */
+ 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
+ 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
+ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ },
+ .oobfree = {
+ /* 2 bytes at offset 0 hold manufacturer badblock markers */
+ {.offset = 2, .length = 22, },
+ /* 5 bytes at offset 8 hold BBT markers */
+ /* 8 bytes at offset 16 hold JFFS2 clean markers */
+ },
+};
static int __init nand_davinci_probe(struct platform_device *pdev)
{
@@ -690,15 +718,20 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->mtd.oobsize - 16;
goto syndrome_done;
}
+ if (chunks == 4) {
+ info->ecclayout = hwecc4_2048;
+ info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ goto syndrome_done;
+ }
- /* For large page chips we'll be wanting to use a
- * not-yet-implemented mode that reads OOB data
- * before reading the body of the page, to avoid
- * the "infix OOB" model of NAND_ECC_HW_SYNDROME
- * (and preserve manufacturer badblock markings).
+ /* 4KiB page chips are not yet supported. The eccpos from
+ * nand_ecclayout cannot hold 80 bytes and change to eccpos[]
+ * breaks userspace ioctl interface with mtd-utils. Once we
+ * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
+ * for the 4KiB page chips.
*/
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
- "for large page NAND\n");
+ "for 4KiB-page NAND\n");
ret = -EIO;
goto err_scan;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 1f6eb257871..ddd37d2554e 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -739,7 +739,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
static int fsl_elbc_read_page(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf,
+ int page)
{
fsl_elbc_read_buf(mtd, buf, mtd->writesize);
fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 76beea40d2c..65b26d5a5c0 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -857,6 +857,17 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
}
}
+/* Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks. */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr smallpage_memorybased = {
+ .options = NAND_BBT_SCAN2NDPAGE,
+ .offs = 5,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
static int __init mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
@@ -973,7 +984,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
goto escan;
}
- host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0;
+ if (mtd->writesize == 2048) {
+ host->pagesize_2k = 1;
+ this->badblock_pattern = &smallpage_memorybased;
+ }
if (this->ecc.mode == NAND_ECC_HW) {
switch (mtd->oobsize) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8c21b89d2d0..22113865438 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -688,8 +688,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
retry:
spin_lock(lock);
- /* Hardware controller shared among independend devices */
- /* Hardware controller shared among independend devices */
+ /* Hardware controller shared among independent devices */
if (!chip->controller->active)
chip->controller->active = chip;
@@ -766,7 +765,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
* Not for syndrome calculating ecc controllers, which use a special oob layout
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -782,7 +781,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
* We need a special oob layout and handling even when OOB isn't used.
*/
static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -821,7 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c
* @buf: buffer to store read data
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -831,7 +830,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- chip->ecc.read_page_raw(mtd, chip, buf);
+ chip->ecc.read_page_raw(mtd, chip, buf, page);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -944,7 +943,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -980,6 +979,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * Hardware ECC for large page chips, require OOB to be read first.
+ * For this ECC mode, the write_page method is re-used from ECC_HW.
+ * These methods read/write ECC from the OOB area, unlike the
+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
+ * "infix ECC" scheme and reads/writes ECC from the data area, by
+ * overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+ /* Read the OOB area first */
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ }
+ return 0;
+}
+
+/**
* nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -989,7 +1036,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* we need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1131,11 +1178,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Now read the page into the buffer */
if (unlikely(ops->mode == MTD_OOB_RAW))
- ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+ ret = chip->ecc.read_page_raw(mtd, chip,
+ bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
else
- ret = chip->ecc.read_page(mtd, chip, bufpoi);
+ ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ page);
if (ret < 0)
break;
@@ -1413,8 +1462,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
int len;
uint8_t *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
- (unsigned long long)from, readlen);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+ __func__, (unsigned long long)from, readlen);
if (ops->mode == MTD_OOB_AUTO)
len = chip->ecc.layout->oobavail;
@@ -1422,8 +1471,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
len = mtd->oobsize;
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
- "Attempt to start read outside oob\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
+ "outside oob\n", __func__);
return -EINVAL;
}
@@ -1431,8 +1480,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
if (unlikely(from >= mtd->size ||
ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
(from >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
- "Attempt read beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
+ "of device\n", __func__);
return -EINVAL;
}
@@ -1506,8 +1555,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
/* Do not allow reads past end of device */
if (ops->datbuf && (from + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
- "Attempt read beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
+ "beyond end of device\n", __func__);
return -EINVAL;
}
@@ -1816,8 +1865,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
/* reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "nand_write: "
- "Attempt to write not page aligned data\n");
+ printk(KERN_NOTICE "%s: Attempt to write not "
+ "page aligned data\n", __func__);
return -EINVAL;
}
@@ -1944,8 +1993,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
- (unsigned int)to, (int)ops->ooblen);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+ __func__, (unsigned int)to, (int)ops->ooblen);
if (ops->mode == MTD_OOB_AUTO)
len = chip->ecc.layout->oobavail;
@@ -1954,14 +2003,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "Attempt to write past end of page\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
+ "past end of page\n", __func__);
return -EINVAL;
}
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
- "Attempt to start write outside oob\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
+ "write outside oob\n", __func__);
return -EINVAL;
}
@@ -1970,8 +2019,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
ops->ooboffs + ops->ooblen >
((mtd->size >> chip->page_shift) -
(to >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
- "Attempt write beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+ "end of device\n", __func__);
return -EINVAL;
}
@@ -2026,8 +2075,8 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
/* Do not allow writes past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
- "Attempt write beyond end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+ "end of device\n", __func__);
return -EINVAL;
}
@@ -2117,26 +2166,27 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, len = %llu\n",
- (unsigned long long)instr->addr, (unsigned long long)instr->len);
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
/* Start address must align on block boundary */
if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
return -EINVAL;
}
/* Length must align on block boundary */
if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Length not block aligned\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
+ __func__);
return -EINVAL;
}
/* Do not allow erase past end of device */
if ((instr->len + instr->addr) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Erase past end of device\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n",
+ __func__);
return -EINVAL;
}
@@ -2157,8 +2207,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Device is write protected!!!\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ __func__);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
@@ -2183,8 +2233,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
*/
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "nand_erase: attempt to erase a "
- "bad block at page 0x%08x\n", page);
+ printk(KERN_WARNING "%s: attempt to erase a bad block "
+ "at page 0x%08x\n", __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
@@ -2211,8 +2261,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
- "Failed erase, page 0x%08x\n", page);
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
+ "page 0x%08x\n", __func__, page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
@@ -2272,9 +2322,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
if (!rewrite_bbt[chipnr])
continue;
/* update the BBT for chip */
- DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
- "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
- chip->bbt_td->pages[chipnr]);
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
+ "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
+ rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
@@ -2292,7 +2342,7 @@ static void nand_sync(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_SYNCING);
@@ -2356,8 +2406,8 @@ static void nand_resume(struct mtd_info *mtd)
if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "nand_resume() called for a chip which is not "
- "in suspended state\n");
+ printk(KERN_ERR "%s called for a chip which is not "
+ "in suspended state\n", __func__);
}
/*
@@ -2671,6 +2721,17 @@ int nand_scan_tail(struct mtd_info *mtd)
*/
switch (chip->ecc.mode) {
+ case NAND_ECC_HW_OOB_FIRST:
+ /* Similar to NAND_ECC_HW, but a separate read_page handle */
+ if (!chip->ecc.calculate || !chip->ecc.correct ||
+ !chip->ecc.hwctl) {
+ printk(KERN_WARNING "No ECC functions supplied; "
+ "Hardware ECC not possible\n");
+ BUG();
+ }
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
case NAND_ECC_HW:
/* Use standard hwecc read page function ? */
if (!chip->ecc.read_page)
@@ -2693,7 +2754,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied, "
+ printk(KERN_WARNING "No ECC functions supplied; "
"Hardware ECC not possible\n");
BUG();
}
@@ -2728,7 +2789,8 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
chip->ecc.write_oob = nand_write_oob_std;
- chip->ecc.size = 256;
+ if (!chip->ecc.size)
+ chip->ecc.size = 256;
chip->ecc.bytes = 3;
break;
@@ -2858,7 +2920,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
/* Many callers got this wrong, so check for it for a while... */
if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+ printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
+ __func__);
BUG();
}
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index c0cb87d6d16..db7ae9d6a29 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -417,22 +417,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
EXPORT_SYMBOL(nand_calculate_ecc);
/**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd: MTD block structure
+ * __nand_correct_data - [NAND Interface] Detect and correct bit error(s)
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
+ * @eccsize: data bytes per ecc step (256 or 512)
*
- * Detect and correct a 1 bit error for 256/512 byte block
+ * Detect and correct a 1 bit error for eccsize byte block
*/
-int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
+int __nand_correct_data(unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc,
+ unsigned int eccsize)
{
unsigned char b0, b1, b2, bit_addr;
unsigned int byte_addr;
/* 256 or 512 bytes/ecc */
- const uint32_t eccsize_mult =
- (((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+ const uint32_t eccsize_mult = eccsize >> 8;
/*
* b0 to b2 indicate which bit is faulty (if any)
@@ -495,6 +495,23 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
printk(KERN_ERR "uncorrectable error : ");
return -1;
}
+EXPORT_SYMBOL(__nand_correct_data);
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd: MTD block structure
+ * @buf: raw data read from the chip
+ * @read_ecc: ECC from the chip
+ * @calc_ecc: the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ return __nand_correct_data(buf, read_ecc, calc_ecc,
+ ((struct nand_chip *)mtd->priv)->ecc.size);
+}
EXPORT_SYMBOL(nand_correct_data);
MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 89bf85af642..40b5658bdbe 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd,
wmb();
ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
/* The NDFC uses Smart Media (SMC) bytes order */
- ecc_code[0] = p[2];
- ecc_code[1] = p[1];
+ ecc_code[0] = p[1];
+ ecc_code[1] = p[2];
ecc_code[2] = p[3];
return 0;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ebd07e95b81..090ab87086b 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -18,8 +18,7 @@
#include <linux/mtd/partitions.h>
#include <linux/io.h>
-#include <asm/dma.h>
-
+#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/nand.h>
@@ -112,6 +111,27 @@
static const char *part_probes[] = { "cmdlinepart", NULL };
#endif
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
+static int use_prefetch = 1;
+
+/* "modprobe ... use_prefetch=0" etc */
+module_param(use_prefetch, bool, 0);
+MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+static int use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+#else
+const int use_dma;
+#endif
+#else
+const int use_prefetch;
+const int use_dma;
+#endif
+
struct omap_nand_info {
struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
@@ -124,6 +144,9 @@ struct omap_nand_info {
unsigned long phys_base;
void __iomem *gpmc_cs_baseaddr;
void __iomem *gpmc_baseaddr;
+ void __iomem *nand_pref_fifo_add;
+ struct completion comp;
+ int dma_ch;
};
/**
@@ -189,6 +212,38 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
}
/**
+ * omap_read_buf8 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+
+ ioread8_rep(nand->IO_ADDR_R, buf, len);
+}
+
+/**
+ * omap_write_buf8 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ u_char *p = (u_char *)buf;
+
+ while (len--) {
+ iowrite8(*p++, info->nand.IO_ADDR_W);
+ while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
+ GPMC_STATUS) & GPMC_BUF_FULL));
+ }
+}
+
+/**
* omap_read_buf16 - read data from NAND controller into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
@@ -198,7 +253,7 @@ static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *nand = mtd->priv;
- __raw_readsw(nand->IO_ADDR_R, buf, len / 2);
+ ioread16_rep(nand->IO_ADDR_R, buf, len / 2);
}
/**
@@ -217,13 +272,242 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
len >>= 1;
while (len--) {
- writew(*p++, info->nand.IO_ADDR_W);
+ iowrite16(*p++, info->nand.IO_ADDR_W);
while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
GPMC_STATUS) & GPMC_BUF_FULL))
;
}
}
+
+/**
+ * omap_read_buf_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t pfpw_status = 0, r_count = 0;
+ int ret = 0;
+ u32 *p = (u32 *)buf;
+
+ /* take care of subpage reads */
+ for (; len % 4 != 0; ) {
+ *buf++ = __raw_readb(info->nand.IO_ADDR_R);
+ len--;
+ }
+ p = (u32 *) buf;
+
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, buf, len);
+ else
+ omap_read_buf8(mtd, buf, len);
+ } else {
+ do {
+ pfpw_status = gpmc_prefetch_status();
+ r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
+ ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+ p += r_count;
+ len -= r_count << 2;
+ } while (len);
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset();
+ }
+}
+
+/**
+ * omap_write_buf_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t pfpw_status = 0, w_count = 0;
+ int i = 0, ret = 0;
+ u16 *p = (u16 *) buf;
+
+ /* take care of subpage writes */
+ if (len % 2 != 0) {
+ writeb(*buf, info->nand.IO_ADDR_R);
+ p = (u16 *)(buf + 1);
+ len--;
+ }
+
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_write_buf16(mtd, buf, len);
+ else
+ omap_write_buf8(mtd, buf, len);
+ } else {
+ pfpw_status = gpmc_prefetch_status();
+ while (pfpw_status & 0x3FFF) {
+ w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+ for (i = 0; (i < w_count) && len; i++, len -= 2)
+ iowrite16(*p++, info->nand_pref_fifo_add);
+ pfpw_status = gpmc_prefetch_status();
+ }
+
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset();
+ }
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+/*
+ * omap_nand_dma_cb: callback on the completion of dma transfer
+ * @lch: logical channel
+ * @ch_satuts: channel status
+ * @data: pointer to completion data structure
+ */
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
+{
+ complete((struct completion *) data);
+}
+
+/*
+ * omap_nand_dma_transfer: configer and start dma transfer
+ * @mtd: MTD device structure
+ * @addr: virtual address in RAM of source/destination
+ * @len: number of data bytes to be transferred
+ * @is_write: flag for read/write operation
+ */
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+ unsigned int len, int is_write)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t prefetch_status = 0;
+ enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE;
+ dma_addr_t dma_addr;
+ int ret;
+
+ /* The fifo depth is 64 bytes. We have a sync at each frame and frame
+ * length is 64 bytes.
+ */
+ int buf_len = len >> 6;
+
+ if (addr >= high_memory) {
+ struct page *p1;
+
+ if (((size_t)addr & PAGE_MASK) !=
+ ((size_t)(addr + len - 1) & PAGE_MASK))
+ goto out_copy;
+ p1 = vmalloc_to_page(addr);
+ if (!p1)
+ goto out_copy;
+ addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
+ }
+
+ dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
+ if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
+ dev_err(&info->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n", len);
+ goto out_copy;
+ }
+
+ if (is_write) {
+ omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+ info->phys_base, 0, 0);
+ omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_addr, 0, 0);
+ omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+ 0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+ OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC);
+ } else {
+ omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+ info->phys_base, 0, 0);
+ omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+ dma_addr, 0, 0);
+ omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+ 0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+ OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
+ }
+ /* configure and start prefetch transfer */
+ ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy methode */
+ goto out_copy;
+
+ init_completion(&info->comp);
+
+ omap_start_dma(info->dma_ch);
+
+ /* setup and start DMA using dma_addr */
+ wait_for_completion(&info->comp);
+
+ while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
+ ;
+ /* disable and stop the PFPW engine */
+ gpmc_prefetch_reset();
+
+ dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
+ return 0;
+
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
+ : omap_write_buf16(mtd, (u_char *) addr, len);
+ else
+ is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len)
+ : omap_write_buf8(mtd, (u_char *) addr, len);
+ return 0;
+}
+#else
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+ unsigned int len, int is_write)
+{
+ return 0;
+}
+#endif
+
+/**
+ * omap_read_buf_dma_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ if (len <= mtd->oobsize)
+ omap_read_buf_pref(mtd, buf, len);
+ else
+ /* start transfer in DMA mode */
+ omap_nand_dma_transfer(mtd, buf, len, 0x0);
+}
+
+/**
+ * omap_write_buf_dma_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_dma_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ if (len <= mtd->oobsize)
+ omap_write_buf_pref(mtd, buf, len);
+ else
+ /* start transfer in DMA mode */
+ omap_nand_dma_transfer(mtd, buf, len, 0x1);
+}
+
/**
* omap_verify_buf - Verify chip data against buffer
* @mtd: MTD device structure
@@ -658,17 +942,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
err = -ENOMEM;
goto out_release_mem_region;
}
+
info->nand.controller = &info->controller;
info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
info->nand.cmd_ctrl = omap_hwcontrol;
- /* REVISIT: only supports 16-bit NAND flash */
-
- info->nand.read_buf = omap_read_buf16;
- info->nand.write_buf = omap_write_buf16;
- info->nand.verify_buf = omap_verify_buf;
-
/*
* If RDY/BSY line is connected to OMAP then use the omap ready
* funcrtion and the generic nand_wait function which reads the status
@@ -689,6 +968,40 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
== 0x1000)
info->nand.options |= NAND_BUSWIDTH_16;
+ if (use_prefetch) {
+ /* copy the virtual address of nand base for fifo access */
+ info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
+
+ info->nand.read_buf = omap_read_buf_pref;
+ info->nand.write_buf = omap_write_buf_pref;
+ if (use_dma) {
+ err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
+ omap_nand_dma_cb, &info->comp, &info->dma_ch);
+ if (err < 0) {
+ info->dma_ch = -1;
+ printk(KERN_WARNING "DMA request failed."
+ " Non-dma data transfer mode\n");
+ } else {
+ omap_set_dma_dest_burst_mode(info->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_src_burst_mode(info->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+
+ info->nand.read_buf = omap_read_buf_dma_pref;
+ info->nand.write_buf = omap_write_buf_dma_pref;
+ }
+ }
+ } else {
+ if (info->nand.options & NAND_BUSWIDTH_16) {
+ info->nand.read_buf = omap_read_buf16;
+ info->nand.write_buf = omap_write_buf16;
+ } else {
+ info->nand.read_buf = omap_read_buf8;
+ info->nand.write_buf = omap_write_buf8;
+ }
+ }
+ info->nand.verify_buf = omap_verify_buf;
+
#ifdef CONFIG_MTD_NAND_OMAP_HWECC
info->nand.ecc.bytes = 3;
info->nand.ecc.size = 512;
@@ -744,9 +1057,12 @@ static int omap_nand_remove(struct platform_device *pdev)
struct omap_nand_info *info = mtd->priv;
platform_set_drvdata(pdev, NULL);
+ if (use_dma)
+ omap_free_dma(info->dma_ch);
+
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
- iounmap(info->nand.IO_ADDR_R);
+ iounmap(info->nand_pref_fifo_add);
kfree(&info->mtd);
return 0;
}
@@ -763,6 +1079,15 @@ static struct platform_driver omap_nand_driver = {
static int __init omap_nand_init(void)
{
printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+
+ /* This check is required if driver is being
+ * loaded run time as a module
+ */
+ if ((1 == use_dma) && (0 == use_prefetch)) {
+ printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
+ "without use_prefetch'. Prefetch will not be"
+ " used in either mode (mpu or dma)\n");
+ }
return platform_driver_register(&omap_nand_driver);
}
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 0d9d4bc9c76..f59c07427af 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -171,7 +171,6 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
}
static struct platform_driver orion_nand_driver = {
- .probe = orion_nand_probe,
.remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
@@ -181,7 +180,7 @@ static struct platform_driver orion_nand_driver = {
static int __init orion_nand_init(void)
{
- return platform_driver_register(&orion_nand_driver);
+ return platform_driver_probe(&orion_nand_driver, orion_nand_probe);
}
static void __exit orion_nand_exit(void)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 30a8ce6d3e6..6ea520ae241 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -102,6 +102,7 @@ enum {
ERR_SENDCMD = -2,
ERR_DBERR = -3,
ERR_BBERR = -4,
+ ERR_SBERR = -5,
};
enum {
@@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
status = nand_readl(info, NDSR);
- if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
+ if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) {
if (status & NDSR_DBERR)
info->retcode = ERR_DBERR;
+ else if (status & NDSR_SBERR)
+ info->retcode = ERR_SBERR;
- disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
+ disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
if (info->use_dma) {
info->state = STATE_DMA_READING;
@@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
break;
- pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+ pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
/* We only are OOB, so if the data has error, does not matter */
if (info->retcode == ERR_DBERR)
@@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
break;
- pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+ pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
if (info->retcode == ERR_DBERR) {
/* for blank page (all 0xff), HW will calculate its ECC as
@@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
* consider it as a ecc error which will tell the caller the
* read fail We have distinguish all the errors, but the
* nand_read_ecc only check this function return value
+ *
+ * Corrected (single-bit) errors must also be noted.
*/
- if (info->retcode != ERR_NONE)
+ if (info->retcode == ERR_SBERR)
+ return 1;
+ else if (info->retcode != ERR_NONE)
return -1;
return 0;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 2bc896623e2..02bef21f2e4 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -329,7 +329,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
}
static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -857,7 +857,6 @@ static int __exit flctl_remove(struct platform_device *pdev)
}
static struct platform_driver flctl_driver = {
- .probe = flctl_probe,
.remove = flctl_remove,
.driver = {
.name = "sh_flctl",
@@ -867,7 +866,7 @@ static struct platform_driver flctl_driver = {
static int __init flctl_nand_init(void)
{
- return platform_driver_register(&flctl_driver);
+ return platform_driver_probe(&flctl_driver, flctl_probe);
}
static void __exit flctl_nand_cleanup(void)
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index daa6a4c3b8c..92c73344a66 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -301,6 +301,21 @@ static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
return 0;
}
+static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ int r0, r1;
+
+ /* assume ecc.size = 512 and ecc.bytes = 6 */
+ r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+ if (r0 < 0)
+ return r0;
+ r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256);
+ if (r1 < 0)
+ return r1;
+ return r0 + r1;
+}
+
static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
{
struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
@@ -424,7 +439,7 @@ static int tmio_probe(struct platform_device *dev)
nand_chip->ecc.bytes = 6;
nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
- nand_chip->ecc.correct = nand_correct_data;
+ nand_chip->ecc.correct = tmio_nand_correct_data;
if (data)
nand_chip->badblock_pattern = data->badblock_pattern;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 488088eff2c..73af8324d0d 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -189,18 +189,43 @@ static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
struct platform_device *dev = mtd_to_platdev(mtd);
+ struct nand_chip *chip = mtd->priv;
+ int eccbytes;
u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
mcr &= ~TXX9_NDFMCR_ECC_ALL;
txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR);
- ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
- ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
- ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) {
+ ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code += 3;
+ }
txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
return 0;
}
+static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ struct nand_chip *chip = mtd->priv;
+ int eccsize;
+ int corrected = 0;
+ int stat;
+
+ for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
+ stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+ if (stat < 0)
+ return stat;
+ corrected += stat;
+ buf += 256;
+ read_ecc += 3;
+ calc_ecc += 3;
+ }
+ return corrected;
+}
+
static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct platform_device *dev = mtd_to_platdev(mtd);
@@ -244,6 +269,22 @@ static void txx9ndfmc_initialize(struct platform_device *dev)
#define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
+static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = nand_scan_ident(mtd, 1);
+ if (!ret) {
+ if (mtd->writesize >= 512) {
+ chip->ecc.size = mtd->writesize;
+ chip->ecc.bytes = 3 * (mtd->writesize / 256);
+ }
+ ret = nand_scan_tail(mtd);
+ }
+ return ret;
+}
+
static int __init txx9ndfmc_probe(struct platform_device *dev)
{
struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
@@ -321,9 +362,10 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
chip->cmd_ctrl = txx9ndfmc_cmd_ctrl;
chip->dev_ready = txx9ndfmc_dev_ready;
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
- chip->ecc.correct = nand_correct_data;
+ chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
chip->ecc.mode = NAND_ECC_HW;
+ /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->chip_delay = 100;
@@ -349,7 +391,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
if (plat->wide_mask & (1 << i))
chip->options |= NAND_BUSWIDTH_16;
- if (nand_scan(mtd, 1)) {
+ if (txx9ndfmc_nand_scan(mtd)) {
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
continue;
diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/w90p910_nand.c
new file mode 100644
index 00000000000..7680e731348
--- /dev/null
+++ b/drivers/mtd/nand/w90p910_nand.c
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#define REG_FMICSR 0x00
+#define REG_SMCSR 0xa0
+#define REG_SMISR 0xac
+#define REG_SMCMD 0xb0
+#define REG_SMADDR 0xb4
+#define REG_SMDATA 0xb8
+
+#define RESET_FMI 0x01
+#define NAND_EN 0x08
+#define READYBUSY (0x01 << 18)
+
+#define SWRST 0x01
+#define PSIZE (0x01 << 3)
+#define DMARWEN (0x03 << 1)
+#define BUSWID (0x01 << 4)
+#define ECC4EN (0x01 << 5)
+#define WP (0x01 << 24)
+#define NANDCS (0x01 << 25)
+#define ENDADDR (0x01 << 31)
+
+#define read_data_reg(dev) \
+ __raw_readl((dev)->reg + REG_SMDATA)
+
+#define write_data_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMDATA)
+
+#define write_cmd_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMCMD)
+
+#define write_addr_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMADDR)
+
+struct w90p910_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ void __iomem *reg;
+ struct clk *clk;
+ spinlock_t lock;
+};
+
+static const struct mtd_partition partitions[] = {
+ {
+ .name = "NAND FS 0",
+ .offset = 0,
+ .size = 8 * 1024 * 1024
+ },
+ {
+ .name = "NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ }
+};
+
+static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd)
+{
+ unsigned char ret;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ ret = (unsigned char)read_data_reg(nand);
+
+ return ret;
+}
+
+static void w90p910_nand_read_buf(struct mtd_info *mtd,
+ unsigned char *buf, int len)
+{
+ int i;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ for (i = 0; i < len; i++)
+ buf[i] = (unsigned char)read_data_reg(nand);
+}
+
+static void w90p910_nand_write_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
+{
+ int i;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ for (i = 0; i < len; i++)
+ write_data_reg(nand, buf[i]);
+}
+
+static int w90p910_verify_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
+{
+ int i;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ for (i = 0; i < len; i++) {
+ if (buf[i] != (unsigned char)read_data_reg(nand))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int w90p910_check_rb(struct w90p910_nand *nand)
+{
+ unsigned int val;
+ spin_lock(&nand->lock);
+ val = __raw_readl(REG_SMISR);
+ val &= READYBUSY;
+ spin_unlock(&nand->lock);
+
+ return val;
+}
+
+static int w90p910_nand_devready(struct mtd_info *mtd)
+{
+ struct w90p910_nand *nand;
+ int ready;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ ready = (w90p910_check_rb(nand)) ? 1 : 0;
+ return ready;
+}
+
+static void w90p910_nand_command_lp(struct mtd_info *mtd,
+ unsigned int command, int column, int page_addr)
+{
+ register struct nand_chip *chip = mtd->priv;
+ struct w90p910_nand *nand;
+
+ nand = container_of(mtd, struct w90p910_nand, mtd);
+
+ if (command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ write_cmd_reg(nand, command & 0xff);
+
+ if (column != -1 || page_addr != -1) {
+
+ if (column != -1) {
+ if (chip->options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ write_addr_reg(nand, column);
+ write_addr_reg(nand, column >> 8 | ENDADDR);
+ }
+ if (page_addr != -1) {
+ write_addr_reg(nand, page_addr);
+
+ if (chip->chipsize > (128 << 20)) {
+ write_addr_reg(nand, page_addr >> 8);
+ write_addr_reg(nand, page_addr >> 16 | ENDADDR);
+ } else {
+ write_addr_reg(nand, page_addr >> 8 | ENDADDR);
+ }
+ }
+ }
+
+ switch (command) {
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_DEPLETE1:
+ return;
+
+ case NAND_CMD_STATUS_ERROR:
+ case NAND_CMD_STATUS_ERROR0:
+ case NAND_CMD_STATUS_ERROR1:
+ case NAND_CMD_STATUS_ERROR2:
+ case NAND_CMD_STATUS_ERROR3:
+ udelay(chip->chip_delay);
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->dev_ready)
+ break;
+ udelay(chip->chip_delay);
+
+ write_cmd_reg(nand, NAND_CMD_STATUS);
+ write_cmd_reg(nand, command);
+
+ while (!w90p910_check_rb(nand))
+ ;
+
+ return;
+
+ case NAND_CMD_RNDOUT:
+ write_cmd_reg(nand, NAND_CMD_RNDOUTSTART);
+ return;
+
+ case NAND_CMD_READ0:
+
+ write_cmd_reg(nand, NAND_CMD_READSTART);
+ default:
+
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
+ return;
+ }
+ }
+
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ while (!chip->dev_ready(mtd))
+ ;
+}
+
+
+static void w90p910_nand_enable(struct w90p910_nand *nand)
+{
+ unsigned int val;
+ spin_lock(&nand->lock);
+ __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR));
+
+ val = __raw_readl(nand->reg + REG_FMICSR);
+
+ if (!(val & NAND_EN))
+ __raw_writel(val | NAND_EN, REG_FMICSR);
+
+ val = __raw_readl(nand->reg + REG_SMCSR);
+
+ val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS);
+ val |= WP;
+
+ __raw_writel(val, nand->reg + REG_SMCSR);
+
+ spin_unlock(&nand->lock);
+}
+
+static int __devinit w90p910_nand_probe(struct platform_device *pdev)
+{
+ struct w90p910_nand *w90p910_nand;
+ struct nand_chip *chip;
+ int retval;
+ struct resource *res;
+
+ retval = 0;
+
+ w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL);
+ if (!w90p910_nand)
+ return -ENOMEM;
+ chip = &(w90p910_nand->chip);
+
+ w90p910_nand->mtd.priv = chip;
+ w90p910_nand->mtd.owner = THIS_MODULE;
+ spin_lock_init(&w90p910_nand->lock);
+
+ w90p910_nand->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(w90p910_nand->clk)) {
+ retval = -ENOENT;
+ goto fail1;
+ }
+ clk_enable(w90p910_nand->clk);
+
+ chip->cmdfunc = w90p910_nand_command_lp;
+ chip->dev_ready = w90p910_nand_devready;
+ chip->read_byte = w90p910_nand_read_byte;
+ chip->write_buf = w90p910_nand_write_buf;
+ chip->read_buf = w90p910_nand_read_buf;
+ chip->verify_buf = w90p910_verify_buf;
+ chip->chip_delay = 50;
+ chip->options = 0;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ retval = -ENXIO;
+ goto fail1;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ retval = -EBUSY;
+ goto fail1;
+ }
+
+ w90p910_nand->reg = ioremap(res->start, resource_size(res));
+ if (!w90p910_nand->reg) {
+ retval = -ENOMEM;
+ goto fail2;
+ }
+
+ w90p910_nand_enable(w90p910_nand);
+
+ if (nand_scan(&(w90p910_nand->mtd), 1)) {
+ retval = -ENXIO;
+ goto fail3;
+ }
+
+ add_mtd_partitions(&(w90p910_nand->mtd), partitions,
+ ARRAY_SIZE(partitions));
+
+ platform_set_drvdata(pdev, w90p910_nand);
+
+ return retval;
+
+fail3: iounmap(w90p910_nand->reg);
+fail2: release_mem_region(res->start, resource_size(res));
+fail1: kfree(w90p910_nand);
+ return retval;
+}
+
+static int __devexit w90p910_nand_remove(struct platform_device *pdev)
+{
+ struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ iounmap(w90p910_nand->reg);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(w90p910_nand->clk);
+ clk_put(w90p910_nand->clk);
+
+ kfree(w90p910_nand);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver w90p910_nand_driver = {
+ .probe = w90p910_nand_probe,
+ .remove = __devexit_p(w90p910_nand_remove),
+ .driver = {
+ .name = "w90p910-fmi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init w90p910_nand_init(void)
+{
+ return platform_driver_register(&w90p910_nand_driver);
+}
+
+static void __exit w90p910_nand_exit(void)
+{
+ platform_driver_unregister(&w90p910_nand_driver);
+}
+
+module_init(w90p910_nand_init);
+module_exit(w90p910_nand_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 nand driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-fmi");
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 3e164f0c929..62d6a78c4ee 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -46,21 +46,12 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
const u32 *reg;
int len;
- /* check if this is a partition node */
- partname = of_get_property(pp, "name", &len);
- if (strcmp(partname, "partition") != 0) {
+ reg = of_get_property(pp, "reg", &len);
+ if (!reg) {
nr_parts--;
continue;
}
- reg = of_get_property(pp, "reg", &len);
- if (!reg || (len != 2 * sizeof(u32))) {
- of_node_put(pp);
- dev_err(dev, "Invalid 'reg' on %s\n", node->full_name);
- kfree(*pparts);
- *pparts = NULL;
- return -EINVAL;
- }
(*pparts)[i].offset = reg[0];
(*pparts)[i].size = reg[1];
@@ -75,6 +66,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
i++;
}
+ if (!i) {
+ of_node_put(pp);
+ dev_err(dev, "No valid partition found on %s\n", node->full_name);
+ kfree(*pparts);
+ *pparts = NULL;
+ return -EINVAL;
+ }
+
return nr_parts;
}
EXPORT_SYMBOL(of_mtd_parse_partitions);
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 79fa79e8f8d..a38f580c2bb 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -5,6 +5,7 @@
menuconfig MTD_ONENAND
tristate "OneNAND Device Support"
depends on MTD
+ select MTD_PARTITIONS
help
This enables support for accessing all type of OneNAND flash
devices. For further information see
@@ -23,7 +24,6 @@ config MTD_ONENAND_VERIFY_WRITE
config MTD_ONENAND_GENERIC
tristate "OneNAND Flash device via platform device driver"
- depends on ARM
help
Support for OneNAND flash via platform device driver.
@@ -66,7 +66,6 @@ config MTD_ONENAND_2X_PROGRAM
config MTD_ONENAND_SIM
tristate "OneNAND simulator support"
- depends on MTD_PARTITIONS
help
The simulator may simulate various OneNAND flash chips for the
OneNAND MTD layer.
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3a496c33fb5..e78914938c5 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -19,12 +19,16 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
-
#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#define DRIVER_NAME "onenand"
+/*
+ * Note: Driver name and platform data format have been updated!
+ *
+ * This version of the driver is named "onenand-flash" and takes struct
+ * onenand_platform_data as platform data. The old ARM-specific version
+ * with the name "onenand" used to take struct flash_platform_data.
+ */
+#define DRIVER_NAME "onenand-flash"
#ifdef CONFIG_MTD_PARTITIONS
static const char *part_probes[] = { "cmdlinepart", NULL, };
@@ -39,16 +43,16 @@ struct onenand_info {
static int __devinit generic_onenand_probe(struct platform_device *pdev)
{
struct onenand_info *info;
- struct flash_platform_data *pdata = pdev->dev.platform_data;
+ struct onenand_platform_data *pdata = pdev->dev.platform_data;
struct resource *res = pdev->resource;
- unsigned long size = res->end - res->start + 1;
+ unsigned long size = resource_size(res);
int err;
info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
- if (!request_mem_region(res->start, size, pdev->dev.driver->name)) {
+ if (!request_mem_region(res->start, size, dev_name(&pdev->dev))) {
err = -EBUSY;
goto out_free_info;
}
@@ -59,7 +63,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
goto out_release_mem_region;
}
- info->onenand.mmcontrol = pdata->mmcontrol;
+ info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0;
info->onenand.irq = platform_get_irq(pdev, 0);
info->mtd.name = dev_name(&pdev->dev);
@@ -75,7 +79,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(&info->mtd, info->parts, err);
- else if (err <= 0 && pdata->parts)
+ else if (err <= 0 && pdata && pdata->parts)
add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
@@ -99,7 +103,7 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev)
{
struct onenand_info *info = platform_get_drvdata(pdev);
struct resource *res = pdev->resource;
- unsigned long size = res->end - res->start + 1;
+ unsigned long size = resource_size(res);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 6e829095ea9..ff66e4330aa 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1191,7 +1191,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
/*
* Chip boundary handling in DDP
* Now we issued chip 1 read and pointed chip 1
- * bufferam so we have to point chip 0 bufferam.
+ * bufferram so we have to point chip 0 bufferram.
*/
if (ONENAND_IS_DDP(this) &&
unlikely(from == (this->chipsize >> 1))) {
@@ -1867,8 +1867,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
ONENAND_SET_NEXT_BUFFERRAM(this);
/*
- * 2 PLANE, MLC, and Flex-OneNAND doesn't support
- * write-while-programe feature.
+ * 2 PLANE, MLC, and Flex-OneNAND do not support
+ * write-while-program feature.
*/
if (!ONENAND_IS_2PLANE(this) && !first) {
ONENAND_SET_PREV_BUFFERRAM(this);
@@ -1879,7 +1879,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
if (ret) {
written -= prevlen;
- printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+ printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
break;
}
@@ -1905,7 +1905,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, to, !ret && !subpage);
if (ret) {
- printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+ printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
break;
}
@@ -2201,7 +2201,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_ERASING);
- /* Loop throught the pages */
+ /* Loop through the blocks */
instr->state = MTD_ERASING;
while (len) {
@@ -2328,7 +2328,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
if (bbm->bbt)
bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* We write two bytes, so we dont have to mess with 16 bit access */
+ /* We write two bytes, so we don't have to mess with 16-bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
/* FIXME : What to do when marking SLC block in partition
* with MLC erasesize? For now, it is not advisable to
@@ -2557,7 +2557,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
#ifdef CONFIG_MTD_ONENAND_OTP
-/* Interal OTP operation */
+/* Internal OTP operation */
typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
size_t *retlen, u_char *buf);
@@ -2921,7 +2921,7 @@ static void onenand_check_features(struct mtd_info *mtd)
this->options |= ONENAND_HAS_2PLANE;
case ONENAND_DEVICE_DENSITY_2Gb:
- /* 2Gb DDP don't have 2 plane */
+ /* 2Gb DDP does not have 2 plane */
if (!ONENAND_IS_DDP(this))
this->options |= ONENAND_HAS_2PLANE;
this->options |= ONENAND_HAS_UNLOCK_ALL;
@@ -3364,7 +3364,7 @@ static int onenand_probe(struct mtd_info *mtd)
/* It's real page size */
this->writesize = mtd->writesize;
- /* REVIST: Multichip handling */
+ /* REVISIT: Multichip handling */
if (FLEXONENAND(this))
flexonenand_get_size(mtd);
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index a18e8d2f255..5553cd4eab2 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -512,7 +512,7 @@ static int __init mtd_oobtest_init(void)
goto out;
addr0 = 0;
- for (i = 0; bbt[i] && i < ebcnt; ++i)
+ for (i = 0; i < ebcnt && bbt[i]; ++i)
addr0 += mtd->erasesize;
/* Attempt to write off end of OOB */
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 9648818b9e2..103cac480fe 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -116,11 +116,11 @@ static int verify_eraseblock(int ebnum)
loff_t addr = ebnum * mtd->erasesize;
addr0 = 0;
- for (i = 0; bbt[i] && i < ebcnt; ++i)
+ for (i = 0; i < ebcnt && bbt[i]; ++i)
addr0 += mtd->erasesize;
addrn = mtd->size;
- for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i)
+ for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
addrn -= mtd->erasesize;
set_random_data(writebuf, mtd->erasesize);
@@ -219,11 +219,11 @@ static int crosstest(void)
memset(pp1, 0, pgsize * 4);
addr0 = 0;
- for (i = 0; bbt[i] && i < ebcnt; ++i)
+ for (i = 0; i < ebcnt && bbt[i]; ++i)
addr0 += mtd->erasesize;
addrn = mtd->size;
- for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i)
+ for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
addrn -= mtd->erasesize;
/* Read 2nd-to-last page to pp1 */
@@ -317,7 +317,7 @@ static int erasecrosstest(void)
ebnum = 0;
addr0 = 0;
- for (i = 0; bbt[i] && i < ebcnt; ++i) {
+ for (i = 0; i < ebcnt && bbt[i]; ++i) {
addr0 += mtd->erasesize;
ebnum += 1;
}
@@ -413,7 +413,7 @@ static int erasetest(void)
ebnum = 0;
addr0 = 0;
- for (i = 0; bbt[i] && i < ebcnt; ++i) {
+ for (i = 0; i < ebcnt && bbt[i]; ++i) {
addr0 += mtd->erasesize;
ebnum += 1;
}
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index e9580104b6b..3ff50da9478 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -15,6 +15,7 @@
#include <linux/completion.h>
#include <linux/sched.h>
#include <linux/freezer.h>
+#include <linux/kthread.h>
#include "nodelist.h"
@@ -31,7 +32,7 @@ void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
/* This must only ever be called when no GC thread is currently running */
int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c)
{
- pid_t pid;
+ struct task_struct *tsk;
int ret = 0;
BUG_ON(c->gc_task);
@@ -39,15 +40,16 @@ int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c)
init_completion(&c->gc_thread_start);
init_completion(&c->gc_thread_exit);
- pid = kernel_thread(jffs2_garbage_collect_thread, c, CLONE_FS|CLONE_FILES);
- if (pid < 0) {
- printk(KERN_WARNING "fork failed for JFFS2 garbage collect thread: %d\n", -pid);
+ tsk = kthread_run(jffs2_garbage_collect_thread, c, "jffs2_gcd_mtd%d", c->mtd->index);
+ if (IS_ERR(tsk)) {
+ printk(KERN_WARNING "fork failed for JFFS2 garbage collect thread: %ld\n", -PTR_ERR(tsk));
complete(&c->gc_thread_exit);
- ret = pid;
+ ret = PTR_ERR(tsk);
} else {
/* Wait for it... */
- D1(printk(KERN_DEBUG "JFFS2: Garbage collect thread is pid %d\n", pid));
+ D1(printk(KERN_DEBUG "JFFS2: Garbage collect thread is pid %d\n", tsk->pid));
wait_for_completion(&c->gc_thread_start);
+ ret = tsk->pid;
}
return ret;
@@ -71,7 +73,6 @@ static int jffs2_garbage_collect_thread(void *_c)
{
struct jffs2_sb_info *c = _c;
- daemonize("jffs2_gcd_mtd%d", c->mtd->index);
allow_signal(SIGKILL);
allow_signal(SIGSTOP);
allow_signal(SIGCONT);
@@ -107,6 +108,11 @@ static int jffs2_garbage_collect_thread(void *_c)
* the GC thread get there first. */
schedule_timeout_interruptible(msecs_to_jiffies(50));
+ if (kthread_should_stop()) {
+ D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): kthread_stop() called.\n"));
+ goto die;
+ }
+
/* Put_super will send a SIGKILL and then wait on the sem.
*/
while (signal_pending(current) || freezing(current)) {
diff --git a/fs/jffs2/malloc.c b/fs/jffs2/malloc.c
index 9eff2bdae8a..c082868910f 100644
--- a/fs/jffs2/malloc.c
+++ b/fs/jffs2/malloc.c
@@ -39,13 +39,13 @@ int __init jffs2_create_slab_caches(void)
raw_dirent_slab = kmem_cache_create("jffs2_raw_dirent",
sizeof(struct jffs2_raw_dirent),
- 0, 0, NULL);
+ 0, SLAB_HWCACHE_ALIGN, NULL);
if (!raw_dirent_slab)
goto err;
raw_inode_slab = kmem_cache_create("jffs2_raw_inode",
sizeof(struct jffs2_raw_inode),
- 0, 0, NULL);
+ 0, SLAB_HWCACHE_ALIGN, NULL);
if (!raw_inode_slab)
goto err;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4030ebada49..7a232a9bdd6 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -121,6 +121,7 @@ typedef enum {
NAND_ECC_SOFT,
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
+ NAND_ECC_HW_OOB_FIRST,
} nand_ecc_modes_t;
/*
@@ -271,13 +272,13 @@ struct nand_ecc_ctrl {
uint8_t *calc_ecc);
int (*read_page_raw)(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf);
+ uint8_t *buf, int page);
void (*write_page_raw)(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf);
int (*read_page)(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf);
+ uint8_t *buf, int page);
int (*read_subpage)(struct mtd_info *mtd,
struct nand_chip *chip,
uint32_t offs, uint32_t len,
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 090da505425..052ea8ca243 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -21,6 +21,12 @@ struct mtd_info;
int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
/*
+ * Detect and correct a 1 bit error for eccsize byte block
+ */
+int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
+ unsigned int eccsize);
+
+/*
* Detect and correct a 1 bit error for 256 byte block
*/
int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 8ed87337438..4e49f335067 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -214,4 +214,12 @@ unsigned onenand_block(struct onenand_chip *this, loff_t addr);
loff_t onenand_addr(struct onenand_chip *this, int block);
int flexonenand_region(struct mtd_info *mtd, loff_t addr);
+struct mtd_partition;
+
+struct onenand_platform_data {
+ void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
+ struct mtd_partition *parts;
+ unsigned int nr_parts;
+};
+
#endif /* __LINUX_MTD_ONENAND_H */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index 86a6bbef646..acadbf53a69 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -207,6 +207,9 @@
#define ONENAND_ECC_2BIT (1 << 1)
#define ONENAND_ECC_2BIT_ALL (0xAAAA)
#define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010)
+#define ONENAND_ECC_3BIT (1 << 2)
+#define ONENAND_ECC_4BIT (1 << 3)
+#define ONENAND_ECC_4BIT_UNCORRECTABLE (0x1010)
/*
* One-Time Programmable (OTP)