diff options
| -rw-r--r-- | drivers/net/wireless/bcm43xx/bcm43xx_leds.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/bcm43xx/bcm43xx_leds.h | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/bcm43xx/bcm43xx_main.c | 16 | ||||
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_plx.c | 4 | ||||
| -rw-r--r-- | net/ieee80211/ieee80211_rx.c | 12 |
5 files changed, 35 insertions, 10 deletions
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c index 2ddbec6bf15..7d383a27b92 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c @@ -189,20 +189,24 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) case BCM43xx_LED_INACTIVE: continue; case BCM43xx_LED_OFF: + case BCM43xx_LED_BCM4303_3: break; case BCM43xx_LED_ON: turn_on = 1; break; case BCM43xx_LED_ACTIVITY: + case BCM43xx_LED_BCM4303_0: turn_on = activity; break; case BCM43xx_LED_RADIO_ALL: turn_on = radio->enabled; break; case BCM43xx_LED_RADIO_A: + case BCM43xx_LED_BCM4303_2: turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A); break; case BCM43xx_LED_RADIO_B: + case BCM43xx_LED_BCM4303_1: turn_on = (radio->enabled && (phy->type == BCM43xx_PHYTYPE_B || phy->type == BCM43xx_PHYTYPE_G)); @@ -257,7 +261,8 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) continue; #endif /* CONFIG_BCM43XX_DEBUG */ default: - assert(0); + dprintkl(KERN_INFO PFX "Bad value in leds_update," + " led->behaviour: 0x%x\n", led->behaviour); }; if (led->activelow) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h index d3716cf3aeb..811e14a8119 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h @@ -46,6 +46,12 @@ enum { /* LED behaviour values */ BCM43xx_LED_TEST_BLINKSLOW, BCM43xx_LED_TEST_BLINKMEDIUM, BCM43xx_LED_TEST_BLINKFAST, + + /* Misc values for BCM4303 */ + BCM43xx_LED_BCM4303_0 = 0x2B, + BCM43xx_LED_BCM4303_1 = 0x78, + BCM43xx_LED_BCM4303_2 = 0x2E, + BCM43xx_LED_BCM4303_3 = 0x19, }; int bcm43xx_leds_init(struct bcm43xx_private *bcm); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index a94c6d8826f..65edb56107f 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3163,9 +3163,11 @@ static int estimate_periodic_work_badness(unsigned int state) static void bcm43xx_periodic_work_handler(void *d) { struct bcm43xx_private *bcm = d; + struct net_device *net_dev = bcm->net_dev; unsigned long flags; u32 savedirqs = 0; int badness; + unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); badness = estimate_periodic_work_badness(bcm->periodic_state); @@ -3173,7 +3175,18 @@ static void bcm43xx_periodic_work_handler(void *d) /* Periodic work will take a long time, so we want it to * be preemtible. */ - netif_tx_disable(bcm->net_dev); + + netif_tx_lock_bh(net_dev); + /* We must fake a started transmission here, as we are going to + * disable TX. If we wouldn't fake a TX, it would be possible to + * trigger the netdev watchdog, if the last real TX is already + * some time on the past (slightly less than 5secs) + */ + orig_trans_start = net_dev->trans_start; + net_dev->trans_start = jiffies; + netif_stop_queue(net_dev); + netif_tx_unlock_bh(net_dev); + spin_lock_irqsave(&bcm->irq_lock, flags); bcm43xx_mac_suspend(bcm); if (bcm43xx_using_pio(bcm)) @@ -3198,6 +3211,7 @@ static void bcm43xx_periodic_work_handler(void *d) bcm43xx_pio_thaw_txqueues(bcm); bcm43xx_mac_enable(bcm); netif_wake_queue(bcm->net_dev); + net_dev->trans_start = orig_trans_start; } mmiowb(); spin_unlock_irqrestore(&bcm->irq_lock, flags); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 6dfa041be66..bc81b13a5a2 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -364,7 +364,7 @@ static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, pos = 0; while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { - if (pos + cis[pos + 1] >= CIS_MAX_LEN) + if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN) goto cis_error; switch (cis[pos]) { @@ -391,7 +391,7 @@ static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, break; case CISTPL_MANFID: - if (cis[pos + 1] < 5) + if (cis[pos + 1] < 4) goto cis_error; manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 770704183a1..2759312a420 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1078,12 +1078,12 @@ static int ieee80211_parse_info_param(struct ieee80211_info_element while (length >= sizeof(*info_element)) { if (sizeof(*info_element) + info_element->len > length) { - IEEE80211_ERROR("Info elem: parse failed: " - "info_element->len + 2 > left : " - "info_element->len+2=%zd left=%d, id=%d.\n", - info_element->len + - sizeof(*info_element), - length, info_element->id); + IEEE80211_DEBUG_MGMT("Info elem: parse failed: " + "info_element->len + 2 > left : " + "info_element->len+2=%zd left=%d, id=%d.\n", + info_element->len + + sizeof(*info_element), + length, info_element->id); /* We stop processing but don't return an error here * because some misbehaviour APs break this rule. ie. * Orinoco AP1000. */ |