aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/spi/spidev_test.c2
-rw-r--r--drivers/gpio/gpiolib.c3
-rw-r--r--drivers/of/of_mdio.c2
-rw-r--r--drivers/serial/mpc52xx_uart.c33
-rw-r--r--drivers/spi/omap2_mcspi.c5
-rw-r--r--drivers/spi/spi.c8
6 files changed, 12 insertions, 41 deletions
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index 10abd3773e4..16feda90146 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -58,7 +58,7 @@ static void transfer(int fd)
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
- if (ret == 1)
+ if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 76be229c814..eb0c3fe44b2 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -416,7 +416,8 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
return 0;
free_sd:
- sysfs_put(pdesc->value_sd);
+ if (pdesc)
+ sysfs_put(pdesc->value_sd);
free_id:
idr_remove(&pdesc_idr, id);
desc->flags &= GPIO_FLAGS_MASK;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 18ecae4a437..b4748337223 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -69,7 +69,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
}
phy = get_phy_device(mdio, be32_to_cpup(addr));
- if (!phy) {
+ if (!phy || IS_ERR(phy)) {
dev_err(&mdio->dev, "error probing PHY at address %i\n",
*addr);
continue;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3119fddaedb..a176ab4bd65 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -29,39 +29,6 @@
* kind, whether express or implied.
*/
-/* Platform device Usage :
- *
- * Since PSCs can have multiple function, the correct driver for each one
- * is selected by calling mpc52xx_match_psc_function(...). The function
- * handled by this driver is "uart".
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- *
- * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
- * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
- * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
- * will be mapped to.
- */
-
-/* OF Platform device Usage :
- *
- * This driver is only used for PSCs configured in uart mode. The device
- * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
- * list.
- *
- * By default, PSC devices are enumerated in the order they are found. However
- * a particular PSC number can be forces by adding 'device_no = <port#>'
- * to the device node.
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- */
-
#undef DEBUG
#include <linux/device.h>
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index d8356af118a..e0de0d0eede 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -204,6 +204,7 @@ static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val)
cs->chconf0 = val;
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
}
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
@@ -532,7 +533,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
goto out;
}
#ifdef VERBOSE
- dev_dbg(&spi->dev, "write-%d %04x\n",
+ dev_dbg(&spi->dev, "write-%d %08x\n",
word_len, *tx);
#endif
__raw_writel(*tx++, tx_reg);
@@ -550,7 +551,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
mcspi_write_chconf0(spi, l);
*rx++ = __raw_readl(rx_reg);
#ifdef VERBOSE
- dev_dbg(&spi->dev, "read-%d %04x\n",
+ dev_dbg(&spi->dev, "read-%d %08x\n",
word_len, *(rx - 1));
#endif
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 9ffb0fdbd6f..b3a1f9259b6 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -41,7 +41,7 @@ static void spidev_release(struct device *dev)
spi->master->cleanup(spi);
spi_master_put(spi->master);
- kfree(dev);
+ kfree(spi);
}
static ssize_t
@@ -257,6 +257,7 @@ int spi_add_device(struct spi_device *spi)
{
static DEFINE_MUTEX(spi_add_lock);
struct device *dev = spi->master->dev.parent;
+ struct device *d;
int status;
/* Chipselects are numbered 0..max; validate. */
@@ -278,10 +279,11 @@ int spi_add_device(struct spi_device *spi)
*/
mutex_lock(&spi_add_lock);
- if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev))
- != NULL) {
+ d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev));
+ if (d != NULL) {
dev_err(dev, "chipselect %d already in use\n",
spi->chip_select);
+ put_device(d);
status = -EBUSY;
goto done;
}