diff options
| -rw-r--r-- | drivers/video/omap2/displays/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/Makefile | 3 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 489 |
3 files changed, 497 insertions, 1 deletions
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig index 4d95ed52886..dfb57ee5086 100644 --- a/drivers/video/omap2/displays/Kconfig +++ b/drivers/video/omap2/displays/Kconfig @@ -31,4 +31,10 @@ config PANEL_TOPPOLY_TDO35S help LCD Panel used in CM-T35 +config PANEL_TPO_TD043MTEA1 + tristate "TPO TD043MTEA1 LCD Panel" + depends on OMAP2_DSS && I2C + help + LCD Panel used in OMAP3 Pandora + endmenu diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile index e75cc70415f..e2bb32168de 100644 --- a/drivers/video/omap2/displays/Makefile +++ b/drivers/video/omap2/displays/Makefile @@ -3,4 +3,5 @@ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o -obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
\ No newline at end of file +obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o +obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c new file mode 100644 index 00000000000..f297a46f2b1 --- /dev/null +++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c @@ -0,0 +1,489 @@ +/* + * LCD panel driver for TPO TD043MTEA1 + * + * Author: Gražvydas Ignotas <notasas@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio.h> +#include <linux/err.h> + +#include <plat/display.h> + +#define TPO_R02_MODE(x) ((x) & 7) +#define TPO_R02_MODE_800x480 7 +#define TPO_R02_NCLK_RISING BIT(3) +#define TPO_R02_HSYNC_HIGH BIT(4) +#define TPO_R02_VSYNC_HIGH BIT(5) + +#define TPO_R03_NSTANDBY BIT(0) +#define TPO_R03_EN_CP_CLK BIT(1) +#define TPO_R03_EN_VGL_PUMP BIT(2) +#define TPO_R03_EN_PWM BIT(3) +#define TPO_R03_DRIVING_CAP_100 BIT(4) +#define TPO_R03_EN_PRE_CHARGE BIT(6) +#define TPO_R03_SOFTWARE_CTL BIT(7) + +#define TPO_R04_NFLIP_H BIT(0) +#define TPO_R04_NFLIP_V BIT(1) +#define TPO_R04_CP_CLK_FREQ_1H BIT(2) +#define TPO_R04_VGL_FREQ_1H BIT(4) + +#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \ + TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \ + TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ + TPO_R03_SOFTWARE_CTL) + +#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \ + TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL) + +static const u16 tpo_td043_def_gamma[12] = { + 106, 200, 289, 375, 460, 543, 625, 705, 785, 864, 942, 1020 +}; + +struct tpo_td043_device { + struct spi_device *spi; + struct regulator *vcc_reg; + u16 gamma[12]; + u32 mode; + u32 hmirror:1; + u32 vmirror:1; +}; + +static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data) +{ + struct spi_message m; + struct spi_transfer xfer; + u16 w; + int r; + + spi_message_init(&m); + + memset(&xfer, 0, sizeof(xfer)); + + w = ((u16)addr << 10) | (1 << 8) | data; + xfer.tx_buf = &w; + xfer.bits_per_word = 16; + xfer.len = 2; + spi_message_add_tail(&xfer, &m); + + r = spi_sync(spi, &m); + if (r < 0) + dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r); + return r; +} + +static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12]) +{ + u8 i, val; + + /* gamma bits [9:8] */ + for (val = i = 0; i < 4; i++) + val |= (gamma[i] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x11, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x12, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x13, val); + + /* gamma bits [7:0] */ + for (val = i = 0; i < 12; i++) + tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff); +} + +static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v) +{ + u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \ + TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H; + if (h) + reg4 &= ~TPO_R04_NFLIP_H; + if (v) + reg4 &= ~TPO_R04_NFLIP_V; + + return tpo_td043_write(spi, 4, reg4); +} + +static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + + tpo_td043->hmirror = enable; + return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, + tpo_td043->vmirror); +} + +static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + + return tpo_td043->hmirror; +} + +static ssize_t tpo_td043_vmirror_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror); +} + +static ssize_t tpo_td043_vmirror_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + long val; + int ret; + + ret = strict_strtol(buf, 0, &val); + if (ret < 0) + return ret; + + ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val); + if (ret < 0) + return ret; + + tpo_td043->vmirror = val; + + return count; +} + +static ssize_t tpo_td043_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode); +} + +static ssize_t tpo_td043_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + long val; + int ret; + + ret = strict_strtol(buf, 0, &val); + if (ret != 0 || val & ~7) + return -EINVAL; + + tpo_td043->mode = val; + + val |= TPO_R02_NCLK_RISING; + tpo_td043_write(tpo_td043->spi, 2, val); + + return count; +} + +static ssize_t tpo_td043_gamma_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + ssize_t len = 0; + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) { + ret = snprintf(buf + len, PAGE_SIZE - len, "%u ", + tpo_td043->gamma[i]); + if (ret < 0) + return ret; + len += ret; + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t tpo_td043_gamma_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + unsigned int g[12]; + int ret; + int i; + + ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u", + &g[0], &g[1], &g[2], &g[3], &g[4], &g[5], + &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]); + + if (ret != 12) + return -EINVAL; + + for (i = 0; i < 12; i++) + tpo_td043->gamma[i] = g[i]; + + tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); + + return count; +} + +static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR, + tpo_td043_vmirror_show, tpo_td043_vmirror_store); +static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, + tpo_td043_mode_show, tpo_td043_mode_store); +static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR, + tpo_td043_gamma_show, tpo_td043_gamma_store); + +static struct attribute *tpo_td043_attrs[] = { + &dev_attr_vmirror.attr, + &dev_attr_mode.attr, + &dev_attr_gamma.attr, + NULL, +}; + +static struct attribute_group tpo_td043_attr_group = { + .attrs = tpo_td043_attrs, +}; + +static const struct omap_video_timings tpo_td043_timings = { + .x_res = 800, + .y_res = 480, + + .pixel_clock = 36000, + + .hsw = 1, + .hfp = 68, + .hbp = 214, + + .vsw = 1, + .vfp = 39, + .vbp = 34, +}; + +static int tpo_td043_enable(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + int ret; + + dev_dbg(&dssdev->dev, "enable\n"); + + if (dssdev->platform_enable) { + ret = dssdev->platform_enable(dssdev); + if (ret) + return ret; + } + + regulator_enable(tpo_td043->vcc_reg); + + /* wait for power up */ + msleep(160); + + if (gpio_is_valid(nreset_gpio)) + gpio_set_value(nreset_gpio, 1); + + tpo_td043_write(tpo_td043->spi, 2, + TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING); + tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL); + tpo_td043_write(tpo_td043->spi, 0x20, 0xf0); + tpo_td043_write(tpo_td043->spi, 0x21, 0xf0); + tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, + tpo_td043->vmirror); + tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); + + return 0; +} + +static void tpo_td043_disable(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + + dev_dbg(&dssdev->dev, "disable\n"); + + tpo_td043_write(tpo_td043->spi, 3, + TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM); + + if (gpio_is_valid(nreset_gpio)) + gpio_set_value(nreset_gpio, 0); + + /* wait for at least 2 vsyncs before cutting off power */ + msleep(50); + + tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY); + + regulator_disable(tpo_td043->vcc_reg); + + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); +} + +static int tpo_td043_suspend(struct omap_dss_device *dssdev) +{ + tpo_td043_disable(dssdev); + return 0; +} + +static int tpo_td043_resume(struct omap_dss_device *dssdev) +{ + return tpo_td043_enable(dssdev); +} + +static int tpo_td043_probe(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + int ret = 0; + + dev_dbg(&dssdev->dev, "probe\n"); + + if (tpo_td043 == NULL) { + dev_err(&dssdev->dev, "missing tpo_td043_device\n"); + return -ENODEV; + } + + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IHS | + OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IPC; + dssdev->panel.timings = tpo_td043_timings; + dssdev->ctrl.pixel_size = 24; + + tpo_td043->mode = TPO_R02_MODE_800x480; + memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma)); + + tpo_td043->vcc_reg = regulator_get(&dssdev->dev, "vcc"); + if (IS_ERR(tpo_td043->vcc_reg)) { + dev_err(&dssdev->dev, "failed to get LCD VCC regulator\n"); + ret = PTR_ERR(tpo_td043->vcc_reg); + goto fail_regulator; + } + + if (gpio_is_valid(nreset_gpio)) { + ret = gpio_request(nreset_gpio, "lcd reset"); + if (ret < 0) { + dev_err(&dssdev->dev, "couldn't request reset GPIO\n"); + goto fail_gpio_req; + } + + ret = gpio_direction_output(nreset_gpio, 0); + if (ret < 0) { + dev_err(&dssdev->dev, "couldn't set GPIO direction\n"); + goto fail_gpio_direction; + } + } + + ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group); + if (ret) + dev_warn(&dssdev->dev, "failed to create sysfs files\n"); + + return 0; + +fail_gpio_direction: + gpio_free(nreset_gpio); +fail_gpio_req: + regulator_put(tpo_td043->vcc_reg); +fail_regulator: + kfree(tpo_td043); + return ret; +} + +static void tpo_td043_remove(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + + dev_dbg(&dssdev->dev, "remove\n"); + + sysfs_remove_group(&dssdev->dev.kobj, &tpo_td043_attr_group); + regulator_put(tpo_td043->vcc_reg); + if (gpio_is_valid(nreset_gpio)) + gpio_free(nreset_gpio); +} + +static struct omap_dss_driver tpo_td043_driver = { + .probe = tpo_td043_probe, + .remove = tpo_td043_remove, + + .enable = tpo_td043_enable, + .disable = tpo_td043_disable, + .suspend = tpo_td043_suspend, + .resume = tpo_td043_resume, + .set_mirror = tpo_td043_set_hmirror, + .get_mirror = tpo_td043_get_hmirror, + + .driver = { + .name = "tpo_td043mtea1_panel", + .owner = THIS_MODULE, + }, +}; + +static int tpo_td043_spi_probe(struct spi_device *spi) +{ + struct omap_dss_device *dssdev = spi->dev.platform_data; + struct tpo_td043_device *tpo_td043; + int ret; + + if (dssdev == NULL) { + dev_err(&spi->dev, "missing dssdev\n"); + return -ENODEV; + } + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_0; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi_setup failed: %d\n", ret); + return ret; + } + + tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL); + if (tpo_td043 == NULL) + return -ENOMEM; + + tpo_td043->spi = spi; + dev_set_drvdata(&spi->dev, tpo_td043); + dev_set_drvdata(&dssdev->dev, tpo_td043); + + omap_dss_register_driver(&tpo_td043_driver); + + return 0; +} + +static int __devexit tpo_td043_spi_remove(struct spi_device *spi) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev); + + omap_dss_unregister_driver(&tpo_td043_driver); + kfree(tpo_td043); + + return 0; +} + +static struct spi_driver tpo_td043_spi_driver = { + .driver = { + .name = "tpo_td043mtea1_panel_spi", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = tpo_td043_spi_probe, + .remove = __devexit_p(tpo_td043_spi_remove), +}; + +static int __init tpo_td043_init(void) +{ + return spi_register_driver(&tpo_td043_spi_driver); +} + +static void __exit tpo_td043_exit(void) +{ + spi_unregister_driver(&tpo_td043_spi_driver); +} + +module_init(tpo_td043_init); +module_exit(tpo_td043_exit); + +MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>"); +MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver"); +MODULE_LICENSE("GPL"); |