aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/via686a17
-rw-r--r--drivers/hwmon/via686a.c18
2 files changed, 26 insertions, 9 deletions
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index b82014cb7c5..a936fb3824b 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -18,8 +18,9 @@ Authors:
Module Parameters
-----------------
-force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
- that don't set the address in the BIOS. Does not do a
+force_addr=0xaddr Set the I/O base address. Useful for boards that
+ don't set the address in the BIOS. Look for a BIOS
+ upgrade before resorting to this. Does not do a
PCI force; the via686a must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
@@ -63,3 +64,15 @@ miss once-only alarms.
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
+
+Known Issues
+------------
+
+This driver handles sensors integrated in some VIA south bridges. It is
+possible that a motherboard maker used a VT82C686A/B chip as part of a
+product design but was not interested in its hardware monitoring features,
+in which case the sensor inputs will not be wired. This is the case of
+the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
+So, if you need the force_addr parameter, and end up with values which
+don't seem to make any sense, don't look any further: your chip is simply
+not wired for hardware monitoring.
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 60e94879f41..688ccf924c3 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -589,10 +589,8 @@ static int via686a_detect(struct i2c_adapter *adapter)
u16 val;
/* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr)
- address = force_addr & 0xFF00;
-
if (force_addr) {
+ address = force_addr & 0xFF00;
dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
address);
if (PCIBIOS_SUCCESSFUL !=
@@ -603,11 +601,17 @@ static int via686a_detect(struct i2c_adapter *adapter)
pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
return -ENODEV;
if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
+ if (force_addr) {
+ dev_info(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ } else {
+ dev_warn(&adapter->dev, "sensors disabled - enable "
+ "with force_addr=0x%x\n", address);
return -ENODEV;
+ }
}
/* Reserve the ISA region */