diff options
-rw-r--r-- | drivers/video/aty/atyfb.h | 2 | ||||
-rw-r--r-- | drivers/video/aty/atyfb_base.c | 61 | ||||
-rw-r--r-- | drivers/video/aty/mach64_ct.c | 39 |
3 files changed, 68 insertions, 34 deletions
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h index c9b35c6b0b6..f72faff33c0 100644 --- a/drivers/video/aty/atyfb.h +++ b/drivers/video/aty/atyfb.h @@ -185,6 +185,7 @@ struct atyfb_par { int mtrr_aper; int mtrr_reg; #endif + u32 mem_cntl; }; /* @@ -314,6 +315,7 @@ struct aty_pll_ops { void (*set_pll) (const struct fb_info * info, const union aty_pll * pll); void (*get_pll) (const struct fb_info *info, union aty_pll * pll); int (*init_pll) (const struct fb_info * info, union aty_pll * pll); + void (*resume_pll)(const struct fb_info *info, union aty_pll *pll); }; extern const struct aty_pll_ops aty_pll_ati18818_1; /* ATI 18818 */ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index a9c73c257f3..176f9b85cdb 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -242,6 +242,7 @@ static int atyfb_sync(struct fb_info *info); */ static int aty_init(struct fb_info *info); +static void aty_resume_chip(struct fb_info *info); #ifdef CONFIG_ATARI static int store_video_par(char *videopar, unsigned char m64_num); #endif @@ -1971,6 +1972,7 @@ static void atyfb_palette(int enter) #if defined(CONFIG_PM) && defined(CONFIG_PCI) +#ifdef CONFIG_PPC_PMAC /* Power management routines. Those are used for PowerBook sleep. */ static int aty_power_mgmt(int sleep, struct atyfb_par *par) @@ -2027,21 +2029,13 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par) return timeout ? 0 : -EIO; } +#endif static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct fb_info *info = pci_get_drvdata(pdev); struct atyfb_par *par = (struct atyfb_par *) info->par; -#ifndef CONFIG_PPC_PMAC - /* HACK ALERT ! Once I find a proper way to say to each driver - * individually what will happen with it's PCI slot, I'll change - * that. On laptops, the AGP slot is just unclocked, so D2 is - * expected, while on desktops, the card is powered off - */ - return 0; -#endif /* CONFIG_PPC_PMAC */ - if (state.event == pdev->dev.power.power_state.event) return 0; @@ -2059,6 +2053,7 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) par->asleep = 1; par->lock_blank = 1; +#ifdef CONFIG_PPC_PMAC /* Set chip to "suspend" mode */ if (aty_power_mgmt(1, par)) { par->asleep = 0; @@ -2068,6 +2063,9 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) release_console_sem(); return -EIO; } +#else + pci_set_power_state(pdev, pci_choose_state(pdev, state)); +#endif release_console_sem(); @@ -2086,8 +2084,15 @@ static int atyfb_pci_resume(struct pci_dev *pdev) acquire_console_sem(); +#ifdef CONFIG_PPC_PMAC if (pdev->dev.power.power_state.event == 2) aty_power_mgmt(0, par); +#else + pci_set_power_state(pdev, PCI_D0); +#endif + + aty_resume_chip(info); + par->asleep = 0; /* Restore display */ @@ -2339,7 +2344,6 @@ static int __devinit aty_init(struct fb_info *info) const char *ramname = NULL, *xtal; int gtb_memsize, has_var = 0; struct fb_var_screeninfo var; - u32 i; init_waitqueue_head(&par->vblank.wait); spin_lock_init(&par->int_lock); @@ -2470,10 +2474,10 @@ static int __devinit aty_init(struct fb_info *info) if(par->pll_ops->get_pll) par->pll_ops->get_pll(info, &saved_pll); - i = aty_ld_le32(MEM_CNTL, par); + par->mem_cntl = aty_ld_le32(MEM_CNTL, par); gtb_memsize = M64_HAS(GTB_DSP); if (gtb_memsize) - switch (i & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */ + switch (par->mem_cntl & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */ case MEM_SIZE_512K: info->fix.smem_len = 0x80000; break; @@ -2495,7 +2499,7 @@ static int __devinit aty_init(struct fb_info *info) default: info->fix.smem_len = 0x80000; } else - switch (i & MEM_SIZE_ALIAS) { + switch (par->mem_cntl & MEM_SIZE_ALIAS) { case MEM_SIZE_512K: info->fix.smem_len = 0x80000; break; @@ -2525,20 +2529,20 @@ static int __devinit aty_init(struct fb_info *info) if (vram) { info->fix.smem_len = vram * 1024; - i = i & ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS); + par->mem_cntl &= ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS); if (info->fix.smem_len <= 0x80000) - i |= MEM_SIZE_512K; + par->mem_cntl |= MEM_SIZE_512K; else if (info->fix.smem_len <= 0x100000) - i |= MEM_SIZE_1M; + par->mem_cntl |= MEM_SIZE_1M; else if (info->fix.smem_len <= 0x200000) - i |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M; + par->mem_cntl |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M; else if (info->fix.smem_len <= 0x400000) - i |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M; + par->mem_cntl |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M; else if (info->fix.smem_len <= 0x600000) - i |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M; + par->mem_cntl |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M; else - i |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M; - aty_st_le32(MEM_CNTL, i, par); + par->mem_cntl |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M; + aty_st_le32(MEM_CNTL, par->mem_cntl, par); } /* @@ -2584,6 +2588,8 @@ static int __devinit aty_init(struct fb_info *info) #endif if(par->pll_ops->init_pll) par->pll_ops->init_pll(info, &par->pll); + if (par->pll_ops->resume_pll) + par->pll_ops->resume_pll(info, &par->pll); /* * Last page of 8 MB (4 MB on ISA) aperture is MMIO, @@ -2755,6 +2761,19 @@ aty_init_exit: return -1; } +static void aty_resume_chip(struct fb_info *info) +{ + struct atyfb_par *par = info->par; + + aty_st_le32(MEM_CNTL, par->mem_cntl, par); + + if (par->pll_ops->resume_pll) + par->pll_ops->resume_pll(info, &par->pll); + + if (par->aux_start) + aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par); +} + #ifdef CONFIG_ATARI static int __devinit store_video_par(char *video_str, unsigned char m64_num) { diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index 10232cc2dc7..f3b487b8710 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -398,8 +398,8 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, union aty_pll *pll) { struct atyfb_par *par = (struct atyfb_par *) info->par; - u8 mpost_div, xpost_div, sclk_post_div_real, sclk_fb_div, spll_cntl2; - u32 q, i, memcntl, trp; + u8 mpost_div, xpost_div, sclk_post_div_real; + u32 q, memcntl, trp; u32 dsp_config, dsp_on_off, vga_dsp_config, vga_dsp_on_off; #ifdef DEBUG int pllmclk, pllsclk; @@ -575,14 +575,30 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, mpost_div += (q < 32*8); } sclk_post_div_real = postdividers[mpost_div]; - sclk_fb_div = q * sclk_post_div_real / 8; - spll_cntl2 = mpost_div << 4; + pll->ct.sclk_fb_div = q * sclk_post_div_real / 8; + pll->ct.spll_cntl2 = mpost_div << 4; #ifdef DEBUG - pllsclk = (1000000 * 2 * sclk_fb_div) / + pllsclk = (1000000 * 2 * pll->ct.sclk_fb_div) / (par->ref_clk_per * pll->ct.pll_ref_div); printk("atyfb(%s): use sclk, pllsclk=%d MHz, sclk=mclk=%d MHz\n", __FUNCTION__, pllsclk, pllsclk / sclk_post_div_real); #endif + } + + /* Disable the extra precision pixel clock controls since we do not use them. */ + pll->ct.ext_vpll_cntl = aty_ld_pll_ct(EXT_VPLL_CNTL, par); + pll->ct.ext_vpll_cntl &= ~(EXT_VPLL_EN | EXT_VPLL_VGA_EN | EXT_VPLL_INSYNC); + + return 0; +} + +static void aty_resume_pll_ct(const struct fb_info *info, + union aty_pll *pll) +{ + struct atyfb_par *par = info->par; + + if (par->mclk_per != par->xclk_per) { + int i; /* * This disables the sclk, crashes the computer as reported: * aty_st_pll_ct(SPLL_CNTL2, 3, info); @@ -590,8 +606,8 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, * So it seems the sclk must be enabled before it is used; * so PLL_GEN_CNTL must be programmed *after* the sclk. */ - aty_st_pll_ct(SCLK_FB_DIV, sclk_fb_div, par); - aty_st_pll_ct(SPLL_CNTL2, spll_cntl2, par); + aty_st_pll_ct(SCLK_FB_DIV, pll->ct.sclk_fb_div, par); + aty_st_pll_ct(SPLL_CNTL2, pll->ct.spll_cntl2, par); /* * The sclk has been started. However, I believe the first clock * ticks it generates are not very stable. Hope this primitive loop @@ -605,11 +621,7 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, aty_st_pll_ct(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par); aty_st_pll_ct(MCLK_FB_DIV, pll->ct.mclk_fb_div, par); aty_st_pll_ct(PLL_EXT_CNTL, pll->ct.pll_ext_cntl, par); - /* Disable the extra precision pixel clock controls since we do not use them. */ - aty_st_pll_ct(EXT_VPLL_CNTL, aty_ld_pll_ct(EXT_VPLL_CNTL, par) & - ~(EXT_VPLL_EN | EXT_VPLL_VGA_EN | EXT_VPLL_INSYNC), par); - - return 0; + aty_st_pll_ct(EXT_VPLL_CNTL, pll->ct.ext_vpll_cntl, par); } static int dummy(void) @@ -626,5 +638,6 @@ const struct aty_pll_ops aty_pll_ct = { .pll_to_var = aty_pll_to_var_ct, .set_pll = aty_set_pll_ct, .get_pll = aty_get_pll_ct, - .init_pll = aty_init_pll_ct + .init_pll = aty_init_pll_ct, + .resume_pll = aty_resume_pll_ct, }; |