aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/watchdog/watchdog-api.txt3
-rw-r--r--arch/arm/mach-pxa/mainstone.c5
-rw-r--r--arch/arm/mach-s3c2410/sleep.S6
-rw-r--r--drivers/char/watchdog/i8xx_tco.c16
-rw-r--r--drivers/char/watchdog/s3c2410_wdt.c6
-rw-r--r--drivers/char/watchdog/sc1200wdt.c2
-rw-r--r--drivers/mmc/au1xmmc.c6
-rw-r--r--drivers/mmc/imxmmc.c24
-rw-r--r--drivers/mmc/mmc.c1
-rw-r--r--drivers/mmc/mmc_block.c1
-rw-r--r--drivers/mmc/pxamci.c4
-rw-r--r--drivers/mmc/wbsd.c8
-rw-r--r--include/asm-arm/spinlock.h6
-rw-r--r--include/linux/mmc/mmc.h1
14 files changed, 53 insertions, 36 deletions
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt
index c5beb548cfc..21ed5117366 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@@ -36,6 +36,9 @@ timeout or margin. The simplest way to ping the watchdog is to write
some data to the device. So a very simple watchdog daemon would look
like this:
+#include <stdlib.h>
+#include <fcntl.h>
+
int main(int argc, const char *argv[]) {
int fd=open("/dev/watchdog",O_WRONLY);
if (fd==-1) {
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 98356f81000..02e188d98e7 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -95,7 +95,10 @@ static void __init mainstone_init_irq(void)
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
set_irq_chip(irq, &mainstone_irq_chip);
set_irq_handler(irq, do_level_IRQ);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+ else
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_flags(MAINSTONE_IRQ(8), 0);
set_irq_flags(MAINSTONE_IRQ(12), 0);
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 832fb86a03b..73de2eaca22 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
mrc p15, 0, r5, c13, c0, 0 @ PID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ translation table base address
- mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register
- mrc p15, 0, r9, c1, c0, 0 @ control register
+ mrc p15, 0, r8, c1, c0, 0 @ control register
stmia r0, { r4 - r13 }
@@ -165,7 +164,6 @@ ENTRY(s3c2410_cpu_resume)
mcr p15, 0, r5, c13, c0, 0 @ PID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ translation table base
- mcr p15, 0, r8, c1, c1, 0 @ auxilliary control
#ifdef CONFIG_DEBUG_RESUME
mov r3, #'R'
@@ -173,7 +171,7 @@ ENTRY(s3c2410_cpu_resume)
#endif
ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
+ mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc
nop @ second-to-last before mmu
mov pc, r2 @ go back to virtual address
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index a13395e2c37..fa2ba9ebe42 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -33,11 +33,6 @@
* 82801E (C-ICH) : document number 273599-001, 273645-002,
* 82801EB (ICH5) : document number 252516-001, 252517-003,
* 82801ER (ICH5R) : document number 252516-001, 252517-003,
- * 82801FB (ICH6) : document number 301473-002, 301474-007,
- * 82801FR (ICH6R) : document number 301473-002, 301474-007,
- * 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- * 82801FW (ICH6W) : document number 301473-001, 301474-007,
- * 82801FRW (ICH6RW) : document number 301473-001, 301474-007
*
* 20000710 Nils Faerber
* Initial Version 0.01
@@ -66,6 +61,10 @@
* 20050807 Wim Van Sebroeck <wim@iguana.be>
* 0.08 Make sure that the watchdog is only "armed" when started.
* (Kernel Bug 4251)
+ * 20060416 Wim Van Sebroeck <wim@iguana.be>
+ * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ * chipsets)
*/
/*
@@ -90,7 +89,7 @@
#include "i8xx_tco.h"
/* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
#define TCO_MODULE_NAME "i8xx TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
#define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* End of list */
};
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 9dc54736e4e..1ea04e9b2b0 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
if (tmr_atboot && started == 0) {
printk(KERN_INFO PFX "Starting Watchdog Timer\n");
s3c2410wdt_start();
+ } else if (!tmr_atboot) {
+ /* if we're not enabling the watchdog, then ensure it is
+ * disabled if it has been left running from the bootloader
+ * or other source */
+
+ s3c2410wdt_stop();
}
return 0;
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index 515ce757204..20b88f9b7be 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
{
int ret;
- printk(banner);
+ printk("%s\n", banner);
spin_lock_init(&sc1200wdt_lock);
sema_init(&open_sem, 1);
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 914d62b2406..5dc4bee7abe 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
}
else
data->bytes_xfered =
- (data->blocks * (1 << data->blksz_bits)) -
+ (data->blocks * data->blksz) -
host->pio.len;
}
@@ -575,7 +575,7 @@ static int
au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
{
- int datalen = data->blocks * (1 << data->blksz_bits);
+ int datalen = data->blocks * data->blksz;
if (dma != 0)
host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
if (host->dma.len == 0)
return MMC_ERR_TIMEOUT;
- au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+ au_writel(data->blksz - 1, HOST_BLKSIZE(host));
if (host->flags & HOST_F_DMA) {
int i;
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index 79358e223f5..a4eb1d0e7a7 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host,
if(!loops)
return 0;
- dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
- loops, where, *pstat, stat_mask);
+ /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+ if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+ dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+ loops, where, *pstat, stat_mask);
return loops;
}
@@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
+ /* Ensure, that clock are stopped else command programming and start fails */
+ imxmci_stop_clock(host);
+
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMD_DAT_CONT_BUSY;
@@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
int trans_done = 0;
unsigned int stat = *pstat;
- if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ if(host->actual_bus_width != MMC_BUS_WIDTH_4)
burst_len = 16;
else
burst_len = 64;
@@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
stat = MMC_STATUS;
/* Flush extra bytes from FIFO */
- while(flush_len >= 2){
- flush_len -= 2;
+ while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
i = MMC_BUFFER_ACCESS;
stat = MMC_STATUS;
stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data)
data_dir_mask = STATUS_DATA_TRANS_DONE;
}
- imxmci_busy_wait_for_status(host, &stat,
- data_dir_mask,
- 50, "imxmci_tasklet_fnc data");
-
if(stat & data_dir_mask) {
clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
imxmci_data_done(host, stat);
@@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
imxmci_stop_clock(host);
MMC_CLK_RATE = (prescaler<<3) | clk;
- imxmci_start_clock(host);
+ /*
+ * Under my understanding, clock should not be started there, because it would
+ * initiate SDHC sequencer and send last or random command into card
+ */
+ /*imxmci_start_clock(host);*/
dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 1ca2c8b9c9b..6201f3086a0 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host)
data.timeout_ns = card->csd.tacc_ns * 10;
data.timeout_clks = card->csd.tacc_clks * 10;
data.blksz_bits = 3;
+ data.blksz = 1 << 3;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 06bd1f4cb9b..e39cc05c64c 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
+ brq.data.blksz = 1 << md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index f97b472085c..b49368fd96b 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
nob = 0xffff;
writel(nob, host->base + MMC_NOB);
- writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+ writel(data->blksz, host->base + MMC_BLKLEN);
clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
do_div(clks, 1000000000UL);
@@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
* data blocks as being in error.
*/
if (data->error == MMC_ERR_NONE)
- data->bytes_xfered = data->blocks << data->blksz_bits;
+ data->bytes_xfered = data->blocks * data->blksz;
else
data->bytes_xfered = 0;
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 39b3d97f891..8167332d401 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
unsigned long dmaflags;
DBGF("blksz %04x blks %04x flags %08x\n",
- 1 << data->blksz_bits, data->blocks, data->flags);
+ data->blksz, data->blocks, data->flags);
DBGF("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
/*
* Calculate size.
*/
- host->size = data->blocks << data->blksz_bits;
+ host->size = data->blocks * data->blksz;
/*
* Check timeout values for overflow.
@@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
* Two bytes are needed for each data line.
*/
if (host->bus_width == MMC_BUS_WIDTH_1) {
- blksize = (1 << data->blksz_bits) + 2;
+ blksize = data->blksz + 2;
wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
} else if (host->bus_width == MMC_BUS_WIDTH_4) {
- blksize = (1 << data->blksz_bits) + 2 * 4;
+ blksize = data->blksz + 2 * 4;
wbsd_write_index(host, WBSD_IDX_PBSMSB,
((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 43ad4e55878..406ca97a8ab 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,6 +142,9 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
: "cc");
}
+/* write_can_lock - would write_trylock() succeed? */
+#define __raw_write_can_lock(x) ((x)->lock == 0x80000000)
+
/*
* Read locks are a bit more hairy:
* - Exclusively load the lock value.
@@ -198,4 +201,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw)
#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
+/* read_can_lock - would read_trylock() succeed? */
+#define __raw_read_can_lock(x) ((x)->lock < 0x80000000)
+
#endif /* __ASM_SPINLOCK_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index bdc556d8849..03a14a30c46 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@ struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz_bits; /* data block size */
+ unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int error; /* data error */
unsigned int flags;
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 23:23:40 +0000