aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/Samsung-S3C24XX/USB-Host.txt93
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c18
-rw-r--r--arch/arm/mm/mm-armv.c17
-rw-r--r--arch/arm/mm/proc-v6.S22
-rw-r--r--drivers/video/pxafb.c8
-rw-r--r--include/asm-arm/arch-s3c2410/usb-control.h3
-rw-r--r--include/asm-arm/pgtable.h14
7 files changed, 147 insertions, 28 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
new file mode 100644
index 00000000000..b93b68e2b14
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -0,0 +1,93 @@
+ S3C24XX USB Host support
+ ========================
+
+
+
+Introduction
+------------
+
+ This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+ Enable at least the following kernel options:
+
+ menuconfig:
+
+ Device Drivers --->
+ USB support --->
+ <*> Support for Host-side USB
+ <*> OHCI HCD support
+
+
+ .config:
+ CONFIG_USB
+ CONFIG_USB_OHCI_HCD
+
+
+ Once these options are configured, the standard set of USB device
+ drivers can be configured and used.
+
+
+Board Support
+-------------
+
+ The driver attaches to a platform device, which will need to be
+ added by the board specific support file in linux/arch/arm/mach-s3c2410,
+ such as mach-bast.c or mach-smdk2410.c
+
+ The platform device's platform_data field is only needed if the
+ board implements extra power control or over-current monitoring.
+
+ The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+ register, so if both ports are to be used for the host, then it is
+ the board support file's responsibility to ensure that the second
+ port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+ See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+ descriptions of the platform device data. An implementation
+ can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+
+ The `struct s3c2410_hcd_info` contains a pair of functions
+ that get called to enable over-current detection, and to
+ control the port power status.
+
+ The ports are numbered 0 and 1.
+
+ power_control:
+
+ Called to enable or disable the power on the port.
+
+ enable_oc:
+
+ Called to enable or disable the over-current monitoring.
+ This should claim or release the resources being used to
+ check the power condition on the port, such as an IRQ.
+
+ report_oc:
+
+ The OHCI driver fills this field in for the over-current code
+ to call when there is a change to the over-current state on
+ an port. The ports argument is a bitmask of 1 bit per port,
+ with bit X being 1 for an over-current on port X.
+
+ The function s3c2410_usb_report_oc() has been provided to
+ ensure this is called correctly.
+
+ port[x]:
+
+ This is struct describes each port, 0 or 1. The platform driver
+ should set the flags field of each port to S3C_HCDFLG_USED if
+ the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2005 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 7f2b6136297..f021fd82be5 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/usb-simtec.c
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -14,6 +14,8 @@
* Modifications:
* 14-Sep-2004 BJD Created
* 18-Oct-2004 BJD Cleanups, and added code to report OC cleared
+ * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc
+ * 09-Aug-2005 BJD Ports powered only if both are enabled
*/
#define DEBUG
@@ -47,13 +49,19 @@
* designed boards.
*/
+static unsigned int power_state[2];
+
static void
usb_simtec_powercontrol(int port, int to)
{
pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
- if (port == 1)
- s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1);
+ power_state[port] = to;
+
+ if (power_state[0] && power_state[1])
+ s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+ else
+ s3c2410_gpio_setpin(S3C2410_GPB4, 1);
}
static irqreturn_t
@@ -63,10 +71,10 @@ usb_simtec_ocirq(int irq, void *pw, struct pt_regs *regs)
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
- s3c2410_report_oc(info, 3);
+ s3c2410_usb_report_oc(info, 3);
} else {
pr_debug("usb_simtec: over-current irq (oc cleared)\n");
- s3c2410_report_oc(info, 0);
+ s3c2410_usb_report_oc(info, 0);
}
return IRQ_HANDLED;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index e33fe4229d0..3c655c54e23 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -383,6 +383,7 @@ static void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
+ unsigned int user_pgprot;
int cpu_arch = cpu_architecture();
int i;
@@ -408,6 +409,9 @@ static void __init build_mem_type_table(void)
}
}
+ cp = &cache_policies[cachepolicy];
+ user_pgprot = cp->pte;
+
/*
* ARMv6 and above have extended page tables.
*/
@@ -426,11 +430,18 @@ static void __init build_mem_type_table(void)
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ /*
+ * Mark the device area as "shared device"
+ */
mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
- }
- cp = &cache_policies[cachepolicy];
+ /*
+ * User pages need to be mapped with the ASID
+ * (iow, non-global)
+ */
+ user_pgprot |= L_PTE_ASID;
+ }
if (cpu_arch >= CPU_ARCH_ARMv5) {
mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
@@ -448,7 +459,7 @@ static void __init build_mem_type_table(void)
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
- v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
+ v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
protection_map[i] = __pgprot(v);
}
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 352db98ee26..3429ddcf65d 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -111,12 +111,6 @@ ENTRY(cpu_v6_switch_mm)
mcr p15, 0, r1, c13, c0, 1 @ set context ID
mov pc, lr
-#define nG (1 << 11)
-#define APX (1 << 9)
-#define AP1 (1 << 5)
-#define AP0 (1 << 4)
-#define XN (1 << 0)
-
/*
* cpu_v6_set_pte(ptep, pte)
*
@@ -139,24 +133,24 @@ ENTRY(cpu_v6_switch_mm)
ENTRY(cpu_v6_set_pte)
str r1, [r0], #-2048 @ linux version
- bic r2, r1, #0x00000ff0
+ bic r2, r1, #0x000007f0
bic r2, r2, #0x00000003
- orr r2, r2, #AP0 | 2
+ orr r2, r2, #PTE_EXT_AP0 | 2
tst r1, #L_PTE_WRITE
tstne r1, #L_PTE_DIRTY
- orreq r2, r2, #APX
+ orreq r2, r2, #PTE_EXT_APX
tst r1, #L_PTE_USER
- orrne r2, r2, #AP1 | nG
- tstne r2, #APX
- bicne r2, r2, #APX | AP0
+ orrne r2, r2, #PTE_EXT_AP1
+ tstne r2, #PTE_EXT_APX
+ bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
tst r1, #L_PTE_YOUNG
- biceq r2, r2, #APX | AP1 | AP0
+ biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
@ tst r1, #L_PTE_EXEC
-@ orreq r2, r2, #XN
+@ orreq r2, r2, #PTE_EXT_XN
tst r1, #L_PTE_PRESENT
moveq r2, #0
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 16e37a535d8..30112816420 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -717,6 +717,9 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
+ /* enable LCD controller clock */
+ pxa_set_cken(CKEN16_LCD, 1);
+
/* Sequence from 11.7.10 */
LCCR3 = fbi->reg_lccr3;
LCCR2 = fbi->reg_lccr2;
@@ -750,6 +753,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
schedule_timeout(20 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
+
+ /* disable LCD controller clock */
+ pxa_set_cken(CKEN16_LCD, 0);
}
/*
@@ -1299,8 +1305,6 @@ int __init pxafb_probe(struct device *dev)
ret = -ENOMEM;
goto failed;
}
- /* enable LCD controller clock */
- pxa_set_cken(CKEN16_LCD, 1);
ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
if (ret) {
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
index 1cc85a096b2..bd43b566db3 100644
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -12,6 +12,7 @@
* Changelog:
* 11-Sep-2004 BJD Created file
* 21-Sep-2004 BJD Updated port info
+ * 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc
*/
#ifndef __ASM_ARCH_USBCONTROL_H
@@ -35,7 +36,7 @@ struct s3c2410_hcd_info {
void (*report_oc)(struct s3c2410_hcd_info *, int ports);
};
-static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
{
if (info->report_oc != NULL) {
(info->report_oc)(info, ports);
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index a9892eb42a2..478c49b56e1 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -188,12 +188,18 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
/*
* - extended small page/tiny page
*/
+#define PTE_EXT_XN (1 << 0) /* v6 */
#define PTE_EXT_AP_MASK (3 << 4)
+#define PTE_EXT_AP0 (1 << 4)
+#define PTE_EXT_AP1 (2 << 4)
#define PTE_EXT_AP_UNO_SRO (0 << 4)
-#define PTE_EXT_AP_UNO_SRW (1 << 4)
-#define PTE_EXT_AP_URO_SRW (2 << 4)
-#define PTE_EXT_AP_URW_SRW (3 << 4)
+#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0)
+#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1)
+#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0)
#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */
+#define PTE_EXT_APX (1 << 9) /* v6 */
+#define PTE_EXT_SHARED (1 << 10) /* v6 */
+#define PTE_EXT_NG (1 << 11) /* v6 */
/*
* - small page
@@ -224,6 +230,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define L_PTE_WRITE (1 << 5)
#define L_PTE_EXEC (1 << 6)
#define L_PTE_DIRTY (1 << 7)
+#define L_PTE_SHARED (1 << 10) /* shared between CPUs (v6) */
+#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */
#ifndef __ASSEMBLY__