aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/libertas/README516
-rw-r--r--drivers/net/wireless/libertas/ioctl.c1349
-rw-r--r--drivers/net/wireless/libertas/join.c135
-rw-r--r--drivers/net/wireless/libertas/join.h4
-rw-r--r--drivers/net/wireless/libertas/wext.c274
-rw-r--r--drivers/net/wireless/libertas/wext.h85
6 files changed, 0 insertions, 2363 deletions
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 688da4c784b..378577200b5 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -40,64 +40,11 @@ NAME
SYNOPSIS
iwpriv <ethX> <command> [sub-command] ...
- iwpriv ethX version
- iwpriv ethX scantype [sub-command]
- iwpriv ethX getSNR <n>
- iwpriv ethX getNF <n>
- iwpriv ethX getRSSI <n>
- iwpriv ethX setrxant <n>
- iwpriv ethX getrxant
- iwpriv ethX settxant <n>
- iwpriv ethX gettxant
- iwpriv ethX authalgs <n>
- iwpriv ethX pre-TBTT <n>
- iwpriv ethX 8021xauthalgs <n>
- iwpriv ethX encryptionmode <n>
iwpriv ethX setregioncode <n>
iwpriv ethX getregioncode
- iwpriv ethX setbcnavg <n>
- iwpriv ethX getbcnavg
- iwpriv ethX setdataavg <n>
- iwpriv ethX setlisteninter <n>
- iwpriv ethX getlisteninter
- iwpriv ethX setmultipledtim <n>
- iwpriv ethX getmultipledtim
- iwpriv ethX atimwindow <n>
- iwpriv ethX deauth
- iwpriv ethX adhocstop
- iwpriv ethX radioon
- iwpriv ethX radiooff
- iwpriv ethX reasso-on
- iwpriv ethX reasso-off
- iwpriv ethX scanmode [sub-command]
- iwpriv ethX setwpaie <n>
- iwpriv ethX wlanidle-off
- iwpriv ethX wlanidle-on
- iwpriv ethX getcis
- iwpriv ethX getlog
- iwpriv ethX getadhocstatus
- iwpriv ethX adhocgrate <n>
-
-Version 4 Command:
- iwpriv ethX inactvityto <n>
- iwpriv ethX sleeppd <n>
- iwpriv ethX enable11d <n>
- iwpriv ethX tpccfg <n>
- iwpriv ethX powercfg <n>
- iwpriv ethX setafc <n>
- iwpriv ethX getafc
Version 5 Command:
iwpriv ethX ledgpio <n>
- iwpriv ethX scanprobes <n>
- iwpriv ethX lolisteninter <n>
- iwpriv ethX rateadapt <n> <m>
- iwpriv ethX txcontrol <n>
- iwpriv ethX psnullinterval <n>
- iwpriv ethX prescan <n>
- iwpriv ethX getrxinfo
- iwpriv ethX gettxrate
- iwpriv ethX beaconinterval
BT Commands:
The blinding table (BT) contains a list of mac addresses that should be
@@ -150,114 +97,6 @@ DESCRIPTION
The ethX parameter specifies the network device that is to be used to
perform this command on. it could be eth0, eth1 etc.
-version
- This is used to get the current version of the driver and the firmware.
-
-scantype
- This command is used to set the scan type to be used by the driver in
- the scan command. This setting will not be used while performing a scan
- for a specific SSID, as it is always done with scan type being active.
-
- where the sub-commands are: -
- active -- to set the scan type to active
- passive -- to set the scan type to passive
- get -- to get the scan type set in the driver
-
-getSNR
- This command gets the average and non average value of Signal to Noise
- Ratio of Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- If no value is given, all four values are returned in the order mentioned
- above.
-
- Note: This command is available only when STA is connected.
-
-getRSSI
- This command gets the average and non average value os Receive Signal
- Strength of Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- Note: This command is available only when STA is connected.
-
-getNF
- This command gets the average and non average value of Noise Floor of
- Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- Note: This command is available only when STA is connected.
-
-setrxant
- This command is used to set the mode for Rx antenna.
-
- The options that can be sent are:-
- 1 -- Antenna 1.
- 2 -- Antenna 2.
- 0xFFFF -- Diversity.
-
- Usage:
- iwpriv ethX setrxant 0x01: select Antenna 1.
-
-getrxant
- This command is used to get the mode for Rx antenna.
-
-
-settxant
- This command is used to set the mode for Tx antenna.
- The options that can be sent are:-
- 1 -- Antenna 1.
- 2 -- Antenna 2.
- 0xFFFF -- Diversity.
- Usage:
- iwpriv ethX settxant 0x01: select Antenna 1.
-
-gettxant
- This command is used to get the mode for Tx antenna.
-
-authalgs
- This command is used by the WPA supplicant to set the authentication
- algorithms in the station.
-
-8021xauthalgs
- This command is used by the WPA supplicant to set the 8021.x authentication algorithm type
- station.
-
- where values can be:-
- 1 -- None
- 2 -- LEAP
- 4 -- TLS
- 8 -- TTLs
- 16 -- MD5
-
-
-encryptionmode
- This command is used by the WPA supplicant to set the encryption algorithm.
-
- where values can be:-
- 0 -- NONE
- 1 -- WEP40
- 2 -- TKIP
- 3 -- CCMP
- 4 -- WEP104
-
-pre-TBTT
- This command is used to set pre-TBTT time period where value is in microseconds.
-
setregioncode
This command is used to set the region code in the station.
where value is 'region code' for various regions like
@@ -270,114 +109,6 @@ getregioncode
This command is used to get the region code information set in the
station.
-setbcnavg
- Set the weighting factor for calculating RSSI.
-
-getbcnavg
- Get weighting factor for calculating RSSI.
-
-setdataavg
- Set the weighting factor for calculating SNR.
-
-setlisteninter
- This command is used to set the listen interval in the
- station.
-
- where the value ranges between 1 - 255
-
-getlisteninter
- This command is used to get the listen interval value set in the
- station.
-
-setmultipledtim
- This command is used to set the multiple dtim value in the
- station.
- where the value is 1,2,3,4,5,0xfffe
- 0xfffe means the firmware will use listen interval in association
- command for waking up
-
-getmultipledtim
- This command is used to get the multiple dtim value set in the station.
-
-atimwindow
- This command is used to set the atim value in the
- station.
-
- where the value ranges between 0 - 50
-
-deauth
- This command is used to send the de-authentication to the AP with which
- the station is associated. This command is valid only when
- station is in Infrastructure mode.
-
- Note: This command is available only when STA is connected.
-
-adhocstop
- This command is used to stop beacon transmission from the station and
- go into idle state in ad-hoc mode.
-
- Note: This command is available only when STA is connected.
-
-radioon
- This command is used to turn on the RF antenna.
-
-radiooff
- This command is sued to turn off the RF antenna.
-
-scanmode
- This command is used to set the station to scan for either IBSS
- networks or BSS networks or both BSS and IBSS networks. This
- command can be used with sub commands,
-
- where the value for
- bss -- Scan All the BSS networks.
- ibss -- Scan All the IBSS networks.
- any -- Scan both BSS and IBSS networks.
-
-
-
-setwpaie
- This command is used by WPA supplicant to send the WPA-IE to the driver.
-
-wlanidle-off
- This command is used to get into idle state.
-
- Note: This command is available only when STA is connected.
-
-wlanidle-on
- This command is used to get off the idle state.
-
- Note: This command is available only when STA is connected.
-
-
-getlog
- This command is used to get the 802.11 statistics available in the
- station.
-
- Note: This command is available only when STA is connected.
-
-getadhocstatus
- This command is used to get the ad-hoc Network Status.
-
- The various status codes are:
- AdhocStarted
- AdhocJoined
- AdhocIdle
- InfraMode
- AutoUnknownMode
-
- Note: This command is available only when STA is connected.
-
-adhocgrate
- This command is used to enable(1) g_rate, Disable(0) g_rate
- and request(2) the status which g_rate is disabled/enabled,
- for Ad-hoc creator.
-
- where value is:-
- 0 -- Disabled
- 1 -- Enabled
- 2 -- Get
-
ledgpio
This command is used to set/get LEDs.
@@ -400,253 +131,6 @@ ledgpio
Note: LED0 is invalid
Note: Maximum Number of LEDs are 16.
-inactivityto
- This command is used by the host to set/get the inactivity timeout value,
- which specifies when WLAN device is put to sleep.
-
- Usage:
- iwpriv ethX inactivityto [<timeout>]
-
- where the parameter are:
- timeout: timeout value in milliseconds.
-
- Example:
- iwpriv eth1 inactivityto
- "get the timeout value"
-
- iwpriv eth1 inactivityto X
- "set timeout value to X ms"
-
-
-sleeppd
- This command is used to configure the sleep period of the WLAN device.
-
- Usage:
- iwpriv ethX sleeppd [<sleep period>]
-
- where the parameter are:
- Period: sleep period in milliseconds. Range 10~60.
-
- Example:
- iwpriv eth1 sleeppd 10
- "set period as 10 ms"
- iwpriv eth1 sleeppd
- "get the sleep period configuration"
-
-enable11d
- This command is used to control 11d
- where value is:-
- 1 -- Enabled
- 0 -- Disabled
- 2 -- Get
-
-
-
-
-tpccfg
- Enables or disables automatic transmit power control.
-
- The first parameter turns this feature on (1) or off (0). When turning
- on, the user must also supply four more parameters in the following
- order:
- -UseSNR (Use SNR (in addition to PER) for TPC algorithm),
- -P0 (P0 power level for TPC),
- -P1 (P1 power level for TPC),
- -P2 (P2 power level for TPC).
-
- Usage:
- iwpriv ethX tpccfg: Get current configuration
- iwpriv ethX tpccfg 0: disable auto TPC
- iwpriv ethX tpccfg 0x01 0x00 0x05 0x0a 0x0d: enable auto TPC; do not use SNR;
- P0=0x05; P1=0x0a; P2=0x0d;
- iwpriv ethX tpccfg 0x01 0x01 0x05 0x0a 0x0d: enable auto TPC; use SNR;
- P0=0x05; P1=0x0a; P2=0x0d.
-
-powercfg
- Enables or disables power adaptation.
-
- The first parameter turns this feature on (1) or off (0). When turning
- on, the user must also supply three more parameters in the following
- order:
- -P0 (P0 power level for Power Adaptation),
- -P1 (P1 power level for Power Adaptation),
- -P2 (P2 power level for Power Adaptation).
-
- Usage:
- iwpriv ethX powercfg: Get current configuration
- iwpriv ethX powercfg 0: disable power adaptation
- iwpriv ethX powercfg 1 0x0d 0x0f 0x12: enable power adaptation;
- P0=0x0d; P1=0x0f; P2=0x12.
-
-getafc
- This command returns automatic frequency control parameters. It returns
- three integers:
- -P0: automatic is on (1), or off (0),
- -P1: current timing offset in PPM (part per million), and
- -P2: current frequency offset in PPM.
-
-setafc
- Set automatic frequency control options.
-
- The first parameter turns automatic on (1) or off (0).
- The user must supply two more parameters in either case, in the following
- order:
-
- When auto is on:
-
- -P0 (automatic adjustment frequency threshold in PPM),
- -P1 (automatic adjustment period in beacon period),
-
- When auto is off:
-
- -P0 (manual adjustment timing offset in PPM), and
- -P1 (manual adjustment frequency offset in PPM).
-
- Usage:
- iwpriv ethX setafc 0 10 10: manual adjustment, both timing and frequcncy
- offset are 10 PPM.
-
- iwpriv ethX setafc 1 10 10 enable afc, automatic adjustment,
- frequency threshold 10 PPM, for every 10 beacon periods.
-
-
-
-scanprobes
- This command sets number of probe requests per channel.
-
- Usage:
- iwpriv ethX scanprobes 3 (set scan probes to 3)
- iwpriv ethX scanprobes (get scan probes)
-
-lolisteninter
- This command sets the value of listen interval.
-
- Usage:
- iwpriv ethX lolisteninter 234 (set the lolisteninter to 234)
- iwpriv ethX lolisteninter (get the lolisteninter value)
-
-rateadapt
- This command sets the data rates bitmap.
- Where <n>
- 0: Disable auto rate adapt
- 1: Enable auto rate adapt
-
- <m>
- data rate bitmap
- Bit Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 12-15 Reserved
-
- Usage:
- iwpriv ethX rateadapt
- read the currect data rate setting
- iwpriv ethX rateadapt 1 0x07
- enable auto data rate adapt and
- data rates are 1Mbps, 2Mbsp and 5.5Mbps
-
-
-txcontrol
- This command is used to set the Tx rate, ack policy, and retry limit on a per packet basis.
-
- Where value <n> is:
- if bit[4] == 1:
- bit[3:0] -- 0 1 2 3 4 5 6 7 8 9 10 11 12 13-16
- Data Rate(Mbps) -- 1 2 5.5 11 Rsv 6 9 12 18 24 36 48 54 Rsv
-
- bit[12:8]
- if bit[12] == 1, bit[11:8] specifies the Tx retry limit.
-
- bit[14:13] specifies per packet ack policy:
- bit[14:13]
- 1 0 use immediate ack policy for this packet
- 1 1 use no ack policy for this packet
- 0 x use the per-packet ack policy setting
-
- Usage:
- iwpriv ethX txcontrol 0x7513
- Use no-ack policy, 5 retires for Tx, 11Mbps rate
-
-
-
-psnullinterval
- This command is used to set/request NULL package interval for Power Save
- under infrastructure mode.
-
- where value is:-
- -1 -- Disabled
- n>0 -- Set interval as n (seconds)
-
-prescan
- This command is used to enable (1)/disable(0) auto prescan before assoicate to the ap
-
- where value is:-
- 0 -- Disabled
- 1 -- Enabled
- 2 -- Get
-
-getrxinfo
- This command gets non average value of Signal to Noise Ratio of Data and rate index.
-
- The following table shows RateIndex and Rate
-
- RateIndex Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 13-15 Reserved
-
-gettxrate
- This command gets current Tx rate index of the first packet associated with Rate Adaptation.
-
- The following table shows RateIndex and Rate
-
- RateIndex Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 13-15 Reserved
-
-bcninterval
- This command is used to sets beacon interval in adhoc mode when an argument is given, and gets current adhoc
- beacon interval when no argument is given. The valid beacon interval is between 20 - 1000,
- default beacon interval is 100.
-
- Usage:
- iwpriv ethX bcninterval 100 (set adhoc beacon interval to 100)
- iwpriv ethX bcninterval (get adhoc beacon interval)
-
fwt_add
This command is used to insert an entry into the FWT table. The list of
parameters must follow the following structure:
diff --git a/drivers/net/wireless/libertas/ioctl.c b/drivers/net/wireless/libertas/ioctl.c
index 636a0897150..42dfd45890c 100644
--- a/drivers/net/wireless/libertas/ioctl.c
+++ b/drivers/net/wireless/libertas/ioctl.c
@@ -27,95 +27,6 @@
#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ)
-static int setrxantenna(wlan_private * priv, int mode)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if (mode != RF_ANTENNA_1 && mode != RF_ANTENNA_2
- && mode != RF_ANTENNA_AUTO) {
- return -EINVAL;
- }
-
- adapter->rxantennamode = mode;
-
- lbs_pr_debug(1, "SET RX Antenna mode to 0x%04x\n", adapter->rxantennamode);
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_set_rx,
- cmd_option_waitforrsp, 0,
- &adapter->rxantennamode);
- return ret;
-}
-
-static int settxantenna(wlan_private * priv, int mode)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if ((mode != RF_ANTENNA_1) && (mode != RF_ANTENNA_2)
- && (mode != RF_ANTENNA_AUTO)) {
- return -EINVAL;
- }
-
- adapter->txantennamode = mode;
-
- lbs_pr_debug(1, "SET TX Antenna mode to 0x%04x\n", adapter->txantennamode);
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_set_tx,
- cmd_option_waitforrsp, 0,
- &adapter->txantennamode);
-
- return ret;
-}
-
-static int getrxantenna(wlan_private * priv, char *buf)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- // clear it, so we will know if the value
- // returned below is correct or not.
- adapter->rxantennamode = 0;
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_get_rx,
- cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
-
- lbs_pr_debug(1, "Get Rx Antenna mode:0x%04x\n", adapter->rxantennamode);
-
- return sprintf(buf, "0x%04x", adapter->rxantennamode) + 1;
-}
-
-static int gettxantenna(wlan_private * priv, char *buf)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- // clear it, so we will know if the value
- // returned below is correct or not.
- adapter->txantennamode = 0;
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_get_tx,
- cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
-
- lbs_pr_debug(1, "Get Tx Antenna mode:0x%04x\n", adapter->txantennamode);
-
- return sprintf(buf, "0x%04x", adapter->txantennamode) + 1;
-}
-
static int wlan_set_region(wlan_private * priv, u16 region_code)
{
int i;
@@ -144,852 +55,6 @@ static int wlan_set_region(wlan_private * priv, u16 region_code)
return 0;
}
-/**
- * @brief Get/Set Firmware wakeup method
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_txcontrol(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data;
- ENTER();
-
- if ((int)wrq->u.data.length == 0) {
- if (copy_to_user
- (wrq->u.data.pointer, &adapter->pkttxctrl, sizeof(u32))) {
- lbs_pr_alert("copy_to_user failed!\n");
- return -EFAULT;
- }
- } else {
- if ((int)wrq->u.data.length > 1) {
- lbs_pr_alert("ioctl too many args!\n");
- return -EFAULT;
- }
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_alert("Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->pkttxctrl = (u32) data;
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return 0;
-}
-
-/**
- * @brief Get/Set NULL Package generation interval
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_null_pkt_interval(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data;
- ENTER();
-
- if ((int)wrq->u.data.length == 0) {
- data = adapter->nullpktinterval;
-
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) {
- lbs_pr_alert( "copy_to_user failed!\n");
- return -EFAULT;
- }
- } else {
- if ((int)wrq->u.data.length > 1) {
- lbs_pr_alert( "ioctl too many args!\n");
- return -EFAULT;
- }
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->nullpktinterval = data;
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_get_rxinfo(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data[2];
- ENTER();
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- data[1] = adapter->rxpd_rate;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- wrq->u.data.length = 2;
- LEAVE();
- return 0;
-}
-
-static int wlan_get_snr(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int data[4];
-
- ENTER();
- memset(data, 0, sizeof(data));
- if (wrq->u.data.length) {
- if (copy_from_user(data, wrq->u.data.pointer,
- min_t(size_t, wrq->u.data.length, 4) * sizeof(int)))
- return -EFAULT;
- }
- if ((wrq->u.data.length == 0) || (data[0] == 0) || (data[0] == 1)) {
- if (adapter->connect_status == libertas_connected) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0,
- cmd_option_waitforrsp,
- 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
- }
- }
-
- if (wrq->u.data.length == 0) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG];
- data[1] = adapter->SNR[TYPE_BEACON][TYPE_AVG];
- data[2] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- data[3] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 4))
- return -EFAULT;
- wrq->u.data.length = 4;
- } else if (data[0] == 0) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 1) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_AVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 2) {
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 3) {
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else
- return -ENOTSUPP;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_beacon_interval(wlan_private * priv, struct iwreq *wrq)
-{
- int data;
- wlan_adapter *adapter = priv->adapter;
-
- if (wrq->u.data.length > 0) {
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int)))
- return -EFAULT;
-
- lbs_pr_debug(1, "WLAN SET BEACON INTERVAL: %d\n", data);
- if ((data > MRVDRV_MAX_BEACON_INTERVAL)
- || (data < MRVDRV_MIN_BEACON_INTERVAL))
- return -ENOTSUPP;
- adapter->beaconperiod = data;
- }
- data = adapter->beaconperiod;
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int)))
- return -EFAULT;
-
- wrq->u.data.length = 1;
-
- return 0;
-}
-
-static int wlan_get_rssi(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int temp;
- int data = 0;
- int *val;
-
- ENTER();
- data = SUBCMD_DATA(wrq);
- if ((data == 0) || (data == 1)) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0, cmd_option_waitforrsp,
- 0, NULL);
- if (ret) {
- LEAVE();
- return ret;
- }
- }
-
- switch (data) {
- case 0:
-
- temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_NOAVG],
- adapter->NF[TYPE_BEACON][TYPE_NOAVG]);
- break;
- case 1:
- temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_AVG],
- adapter->NF[TYPE_BEACON][TYPE_AVG]);
- break;
- case 2:
- temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_NOAVG],
- adapter->NF[TYPE_RXPD][TYPE_NOAVG]);
- break;
- case 3:
- temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE,
- adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE);
- break;
- default:
- return -ENOTSUPP;
- }
- val = (int *)wrq->u.name;
- *val = temp;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_get_nf(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int temp;
- int data = 0;
- int *val;
-
- data = SUBCMD_DATA(wrq);
- if ((data == 0) || (data == 1)) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0, cmd_option_waitforrsp,
- 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
- }
-
- switch (data) {
- case 0:
- temp = adapter->NF[TYPE_BEACON][TYPE_NOAVG];
- break;
- case 1:
- temp = adapter->NF[TYPE_BEACON][TYPE_AVG];
- break;
- case 2:
- temp = adapter->NF[TYPE_RXPD][TYPE_NOAVG];
- break;
- case 3:
- temp = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- break;
- default:
- return -ENOTSUPP;
- }
-
- temp = CAL_NF(temp);
-
- lbs_pr_debug(1, "%s: temp = %d\n", __FUNCTION__, temp);
- val = (int *)wrq->u.name;
- *val = temp;
- return 0;
-}
-
-static int wlan_get_txrate_ioctl(wlan_private * priv, struct ifreq *req)
-{
- wlan_adapter *adapter = priv->adapter;
- int *pdata;
- struct iwreq *wrq = (struct iwreq *)req;
- int ret = 0;
- adapter->txrate = 0;
- lbs_pr_debug(1, "wlan_get_txrate_ioctl\n");
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_tx_rate_query,
- cmd_act_get, cmd_option_waitforrsp,
- 0, NULL);
- if (ret)
- return ret;
-
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->txrate;
- return 0;
-}
-
-static int wlan_get_adhoc_status_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- char status[64];
- wlan_adapter *adapter = priv->adapter;
-
- memset(status, 0, sizeof(status));
-
- switch (adapter->mode) {
- case IW_MODE_ADHOC:
- if (adapter->connect_status == libertas_connected) {
- if (adapter->adhoccreate)
- memcpy(&status, "AdhocStarted", sizeof(status));
- else
- memcpy(&status, "AdhocJoined", sizeof(status));
- } else {
- memcpy(&status, "AdhocIdle", sizeof(status));
- }
- break;
- case IW_MODE_INFRA:
- memcpy(&status, "Inframode", sizeof(status));
- break;
- default:
- memcpy(&status, "AutoUnknownmode", sizeof(status));
- break;
- }
-
- lbs_pr_debug(1, "status = %s\n", status);
- wrq->u.data.length = strlen(status) + 1;
-
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer,
- &status, wrq->u.data.length))
- return -EFAULT;
- }
-
- LEAVE();
- return 0;
-}
-
-/**
- * @brief Set Auto prescan
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_subcmd_setprescan_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- int data;
- wlan_adapter *adapter = priv->adapter;
- int *val;
-
- data = SUBCMD_DATA(wrq);
- lbs_pr_debug(1, "WLAN_SUBCMD_SET_PRESCAN %d\n", data);
- adapter->prescan = data;
-
- val = (int *)wrq->u.name;
- *val = data;
- return 0;
-}
-
-static int wlan_set_multiple_dtim_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- u32 mdtim;
- int idata;
- int ret = -EINVAL;
-
- ENTER();
-
- idata = SUBCMD_DATA(wrq);
- mdtim = (u32) idata;
- if (((mdtim >= MRVDRV_MIN_MULTIPLE_DTIM)
- && (mdtim <= MRVDRV_MAX_MULTIPLE_DTIM))
- || (mdtim == MRVDRV_IGNORE_MULTIPLE_DTIM)) {
- priv->adapter->multipledtim = mdtim;
- ret = 0;
- }
- if (ret)
- lbs_pr_debug(1, "Invalid parameter, multipledtim not changed.\n");
-
- LEAVE();
- return ret;
-}
-
-static void adjust_mtu(wlan_private * priv)
-{
- int mtu_increment = 0;
-
- if (priv->adapter->linkmode == WLAN_LINKMODE_802_11)
- mtu_increment += sizeof(struct ieee80211_hdr_4addr);
-
- if (priv->adapter->radiomode == WLAN_RADIOMODE_RADIOTAP)
- mtu_increment += max(sizeof(struct tx_radiotap_hdr),
- sizeof(struct rx_radiotap_hdr));
- priv->wlan_dev.netdev->mtu = ETH_FRAME_LEN
- - sizeof(struct ethhdr)
- + mtu_increment;
-}
-
-/**
- * @brief Set Link-Layer Layer mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_linkmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
-
- mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data;
-
- switch (mode) {
- case WLAN_LINKMODE_802_3:
- priv->adapter->linkmode = mode;
- break;
- case WLAN_LINKMODE_802_11:
- priv->adapter->linkmode = mode;
- break;
- default:
- lbs_pr_info("usb8388-5: invalid link-layer mode (%#x)\n",
- mode);
- return -EINVAL;
- break;
- }
- lbs_pr_debug(1, "usb8388-5: link-layer mode is %#x\n", mode);
-
- adjust_mtu(priv);
-
- return 0;
-}
-
-/**
- * @brief Set Radio header mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_radiomode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
-
- mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data;
-
- switch (mode) {
- case WLAN_RADIOMODE_NONE:
- priv->adapter->radiomode = mode;
- break;
- case WLAN_RADIOMODE_RADIOTAP:
- priv->adapter->radiomode = mode;
- break;
- default:
- lbs_pr_debug(1, "usb8388-5: invalid radio header mode (%#x)\n",
- mode);
- return -EINVAL;
- }
- lbs_pr_debug(1, "usb8388-5: radio-header mode is %#x\n", mode);
-
- adjust_mtu(priv);
- return 0;
-}
-
-/**
- * @brief Set Debug header mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_debugmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- priv->adapter->debugmode = (int)((struct ifreq *)
- ((u8 *) req + 4))->ifr_data;
- return 0;
-}
-
-static int wlan_subcmd_getrxantenna_ioctl(wlan_private * priv,
- struct ifreq *req)
-{
- int len;
- char buf[8];
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_pr_debug(1, "WLAN_SUBCMD_GETRXANTENNA\n");
- len = getrxantenna(priv, buf);
-
- wrq->u.data.length = len;
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer, &buf, len)) {
- lbs_pr_debug(1, "CopyToUser failed\n");
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int wlan_subcmd_gettxantenna_ioctl(wlan_private * priv,
- struct ifreq *req)
-{
- int len;
- char buf[8];
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_pr_debug(1, "WLAN_SUBCMD_GETTXANTENNA\n");
- len = gettxantenna(priv, buf);
-
- wrq->u.data.length = len;
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer, &buf, len)) {
- lbs_pr_debug(1, "CopyToUser failed\n");
- return -EFAULT;
- }
- }
- return 0;
-}
-
-/**
- * @brief Get the MAC TSF value from the firmware
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure containing buffer
- * space to store a TSF value retrieved from the firmware
- *
- * @return 0 if successful; IOCTL error code otherwise
- */
-static int wlan_get_tsf_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- u64 tsfval;
- int ret;
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_get_tsf,
- 0, cmd_option_waitforrsp, 0, &tsfval);
-
- lbs_pr_debug(1, "IOCTL: Get TSF = 0x%016llx\n", tsfval);
-
- if (ret != 0) {
- lbs_pr_debug(1, "IOCTL: Get TSF; command exec failed\n");
- ret = -EFAULT;
- } else {
- if (copy_to_user(wrq->u.data.pointer,
- &tsfval,
- min_t(size_t, wrq->u.data.length,
- sizeof(tsfval))) != 0) {
-
- lbs_pr_debug(1, "IOCTL: Get TSF; Copy to user failed\n");
- ret = -EFAULT;
- } else {
- ret = 0;
- }
- }
- return ret;
-}
-
-/**
- * @brief Get/Set adapt rate
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_adapt_rateset(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- wlan_adapter *adapter = priv->adapter;
- int data[2];
-
- memset(data, 0, sizeof(data));
- if (!wrq->u.data.length) {
- lbs_pr_debug(1, "Get ADAPT RATE SET\n");
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rate_adapt_rateset,
- cmd_act_get,
- cmd_option_waitforrsp, 0, NULL);
- data[0] = adapter->enablehwauto;
- data[1] = adapter->ratebitmap;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-#define GET_TWO_INT 2
- wrq->u.data.length = GET_TWO_INT;
- } else {
- lbs_pr_debug(1, "Set ADAPT RATE SET\n");
- if (wrq->u.data.length > 2)
- return -EINVAL;
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->enablehwauto = data[0];
- adapter->ratebitmap = data[1];
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rate_adapt_rateset,
- cmd_act_set,
- cmd_option_waitforrsp, 0, NULL);
- }
- return ret;
-}
-
-/**
- * @brief Get/Set inactivity timeout
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_inactivity_timeout(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- int data = 0;
- u16 timeout = 0;
-
- ENTER();
- if (wrq->u.data.length > 1)
- return -ENOTSUPP;
-
- if (wrq->u.data.length == 0) {
- /* Get */
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_inactivity_timeout,
- cmd_act_get,
- cmd_option_waitforrsp, 0,
- &timeout);
- data = timeout;
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- } else {
- /* Set */
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- timeout = data;
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_inactivity_timeout,
- cmd_act_set,
- cmd_option_waitforrsp, 0,
- &timeout);
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return ret;
-}
-
-static int wlan_do_getlog_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- char buf[GETLOG_BUFSIZE - 1];
- wlan_adapter *adapter = priv->adapter;
-
- lbs_pr_debug(1, " GET STATS\n");
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_get_log,
- 0, cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- return ret;
- }
-
- if (wrq->u.data.pointer) {
- sprintf(buf, "\n mcasttxframe %u failed %u retry %u "
- "multiretry %u framedup %u "
- "rtssuccess %u rtsfailure %u ackfailure %u\n"
- "rxfrag %u mcastrxframe %u fcserror %u "
- "txframe %u wepundecryptable %u ",
- adapter->logmsg.mcasttxframe,
- adapter->logmsg.failed,
- adapter->logmsg.retry,
- adapter->logmsg.multiretry,
- adapter->logmsg.framedup,
- adapter->logmsg.rtssuccess,
- adapter->logmsg.rtsfailure,
- adapter->logmsg.ackfailure,
- adapter->logmsg.rxfrag,
- adapter->logmsg.mcastrxframe,
- adapter->logmsg.fcserror,
- adapter->logmsg.txframe,
- adapter->logmsg.wepundecryptable);
- wrq->u.data.length = strlen(buf) + 1;
- if (copy_to_user(wrq->u.data.pointer, buf, wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int wlan_scan_type_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- u8 buf[12];
- u8 *option[] = { "active", "passive", "get", };
- int i, max_options = (sizeof(option) / sizeof(option[0]));
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if (priv->adapter->enable11d) {
- lbs_pr_debug(1, "11D: Cannot set scantype when 11D enabled\n");
- return -EFAULT;
- }
-
- memset(buf, 0, sizeof(buf));
-
- if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf),
- wrq->u.data.length)))
- return -EFAULT;
-
- lbs_pr_debug(1, "Scan type Option = %s\n", buf);
-
- buf[sizeof(buf) - 1] = '\0';
-
- for (i = 0; i < max_options; i++) {
- if (!strcmp(buf, option[i]))
- break;
- }
-
- switch (i) {
- case 0:
- adapter->scantype = cmd_scan_type_active;
- break;
- case 1:
- adapter->scantype = cmd_scan_type_passive;
- break;
- case 2:
- wrq->u.data.length = strlen(option[adapter->scantype]) + 1;
-
- if (copy_to_user(wrq->u.data.pointer,
- option[adapter->scantype],
- wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- ret = -EFAULT;
- }
-
- break;
- default:
- lbs_pr_debug(1, "Invalid Scan type Ioctl Option\n");
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
-static int wlan_scan_mode_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- u8 buf[12];
- u8 *option[] = { "bss", "ibss", "any", "get" };
- int i, max_options = (sizeof(option) / sizeof(option[0]));
- int ret = 0;
-
- ENTER();
-
- memset(buf, 0, sizeof(buf));
-
- if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf),
- wrq->u.data.length))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- lbs_pr_debug(1, "Scan mode Option = %s\n", buf);
-
- buf[sizeof(buf) - 1] = '\0';
-
- for (i = 0; i < max_options; i++) {
- if (!strcmp(buf, option[i]))
- break;
- }
-
- switch (i) {
-
- case 0:
- adapter->scanmode = cmd_bss_type_bss;
- break;
- case 1:
- adapter->scanmode = cmd_bss_type_ibss;
- break;
- case 2:
- adapter->scanmode = cmd_bss_type_any;
- break;
- case 3:
-
- wrq->u.data.length = strlen(option[adapter->scanmode - 1]) + 1;
-
- lbs_pr_debug(1, "Get Scan mode Option = %s\n",
- option[adapter->scanmode - 1]);
-
- lbs_pr_debug(1, "Scan mode length %d\n", wrq->u.data.length);
-
- if (copy_to_user(wrq->u.data.pointer,
- option[adapter->scanmode - 1],
- wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- ret = -EFAULT;
- }
- lbs_pr_debug(1, "GET Scan type Option after copy = %s\n",
- (char *)wrq->u.data.pointer);
-
- break;
-
- default:
- lbs_pr_debug(1, "Invalid Scan mode Ioctl Option\n");
- ret = -EINVAL;
- break;
- }
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Get/Set Adhoc G Rate
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_do_set_grate_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data, data1;
- int *val;
-
- ENTER();
-
- data1 = SUBCMD_DATA(wrq);
- switch (data1) {
- case 0:
- adapter->adhoc_grate_enabled = 0;
- break;
- case 1:
- adapter->adhoc_grate_enabled = 1;
- break;
- case 2:
- break;
- default:
- return -EINVAL;
- }
- data = adapter->adhoc_grate_enabled;
- val = (int *)wrq->u.name;
- *val = data;
- LEAVE();
- return 0;
-}
-
static inline int hex2int(char c)
{
if (c >= '0' && c <= '9')
@@ -1752,36 +817,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
lbs_pr_debug(1, "libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd);
switch (cmd) {
- case WLANSCAN_TYPE:
- lbs_pr_debug(1, "Scan type Ioctl\n");
- ret = wlan_scan_type_ioctl(priv, wrq);
- break;
-
case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */
switch (wrq->u.data.flags) {
- case WLANDEAUTH:
- lbs_pr_debug(1, "Deauth\n");
- libertas_send_deauth(priv);
- break;
-
- case WLANADHOCSTOP:
- lbs_pr_debug(1, "Adhoc stop\n");
- ret = libertas_do_adhocstop_ioctl(priv);
- break;
-
- case WLANRADIOON:
- wlan_radio_ioctl(priv, 1);
- break;
-
- case WLANRADIOOFF:
- wlan_radio_ioctl(priv, 0);
- break;
- case WLANWLANIDLEON:
- libertas_idle_on(priv);
- break;
- case WLANWLANIDLEOFF:
- libertas_idle_off(priv);
- break;
case WLAN_SUBCMD_BT_RESET: /* bt_reset */
wlan_bt_reset_ioctl(priv);
break;
@@ -1791,81 +828,6 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
} /* End of switch */
break;
- case WLAN_SETINT_GETINT:
- /* The first 4 bytes of req->ifr_data is sub-ioctl number
- * after 4 bytes sits the payload.
- */
- subcmd = (int)req->ifr_data; //from iwpriv subcmd
- switch (subcmd) {
- case WLANNF:
- ret = wlan_get_nf(priv, wrq);
- break;
- case WLANRSSI:
- ret = wlan_get_rssi(priv, wrq);
- break;
- case WLANENABLE11D:
- ret = libertas_cmd_enable_11d(priv, wrq);
- break;
- case WLANADHOCGRATE:
- ret = wlan_do_set_grate_ioctl(priv, wrq);
- break;
- case WLAN_SUBCMD_SET_PRESCAN:
- ret = wlan_subcmd_setprescan_ioctl(priv, wrq);
- break;
- }
- break;
-
- case WLAN_SETONEINT_GETONEINT:
- switch (wrq->u.data.flags) {
- case WLAN_BEACON_INTERVAL:
- ret = wlan_beacon_interval(priv, wrq);
- break;
-
- case WLAN_LISTENINTRVL:
- if (!wrq->u.data.length) {
- int data;
- lbs_pr_debug(1, "Get locallisteninterval value\n");
-#define GET_ONE_INT 1
- data = adapter->locallisteninterval;
- if (copy_to_user(wrq->u.data.pointer,
- &data, sizeof(int))) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = GET_ONE_INT;
- } else {
- int data;
- if (copy_from_user
- (&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- lbs_pr_debug(1, "Set locallisteninterval = %d\n",
- data);
-#define MAX_U16_VAL 65535
- if (data > MAX_U16_VAL) {
- lbs_pr_debug(1, "Exceeds U16 value\n");
- return -EINVAL;
- }
- adapter->locallisteninterval = data;
- }
- break;
- case WLAN_TXCONTROL:
- ret = wlan_txcontrol(priv, wrq); //adds for txcontrol ioctl
- break;
-
- case WLAN_NULLPKTINTERVAL:
- ret = wlan_null_pkt_interval(priv, wrq);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- break;
- }
- break;
-
case WLAN_SETONEINT_GETNONE:
/* The first 4 bytes of req->ifr_data is sub-ioctl number
* after 4 bytes sits the payload.
@@ -1876,62 +838,10 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
subcmd = (int)req->ifr_data; //from iwpriv subcmd
switch (subcmd) {
- case WLAN_SUBCMD_SETRXANTENNA: /* SETRXANTENNA */
- idata = SUBCMD_DATA(wrq);
- ret = setrxantenna(priv, idata);
- break;
- case WLAN_SUBCMD_SETTXANTENNA: /* SETTXANTENNA */
- idata = SUBCMD_DATA(wrq);
- ret = settxantenna(priv, idata);
- break;
- case WLAN_SET_ATIM_WINDOW:
- adapter->atimwindow = SUBCMD_DATA(wrq);
- adapter->atimwindow = min_t(__u16, adapter->atimwindow, 50);
- break;
- case WLANSETBCNAVG:
- adapter->bcn_avg_factor = SUBCMD_DATA(wrq);
- if (adapter->bcn_avg_factor == 0)
- adapter->bcn_avg_factor =
- DEFAULT_BCN_AVG_FACTOR;
- if (adapter->bcn_avg_factor > DEFAULT_BCN_AVG_FACTOR)
- adapter->bcn_avg_factor =
- DEFAULT_BCN_AVG_FACTOR;
- break;
- case WLANSETDATAAVG:
- adapter->data_avg_factor = SUBCMD_DATA(wrq);
- if (adapter->data_avg_factor == 0)
- adapter->data_avg_factor =
- DEFAULT_DATA_AVG_FACTOR;
- if (adapter->data_avg_factor > DEFAULT_DATA_AVG_FACTOR)
- adapter->data_avg_factor =
- DEFAULT_DATA_AVG_FACTOR;
- break;
case WLANSETREGION:
idata = SUBCMD_DATA(wrq);
ret = wlan_set_region(priv, (u16) idata);
break;
-
- case WLAN_SET_LISTEN_INTERVAL:
- idata = SUBCMD_DATA(wrq);
- adapter->listeninterval = (u16) idata;
- break;
-
- case WLAN_SET_MULTIPLE_DTIM:
- ret = wlan_set_multiple_dtim_ioctl(priv, req);
- break;
-
- case WLAN_SET_LINKMODE:
- ret = wlan_set_linkmode_ioctl(priv, req);
- break;
-
- case WLAN_SET_RADIOMODE:
- ret = wlan_set_radiomode_ioctl(priv, req);
- break;
-
- case WLAN_SET_DEBUGMODE:
- ret = wlan_set_debugmode_ioctl(priv, req);
- break;
-
case WLAN_SUBCMD_MESH_SET_TTL:
idata = SUBCMD_DATA(wrq);
ret = wlan_mesh_set_ttl_ioctl(priv, idata);
@@ -1944,38 +854,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
break;
- case WLAN_SETNONE_GETTWELVE_CHAR: /* Get Antenna settings */
- /*
- * We've not used IW_PRIV_TYPE_FIXED so sub-ioctl number is
- * in flags of iwreq structure, otherwise it will be in
- * mode member of iwreq structure.
- */
- switch ((int)wrq->u.data.flags) {
- case WLAN_SUBCMD_GETRXANTENNA: /* Get Rx Antenna */
- ret = wlan_subcmd_getrxantenna_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_GETTXANTENNA: /* Get Tx Antenna */
- ret = wlan_subcmd_gettxantenna_ioctl(priv, req);
- break;
-
- case WLAN_GET_TSF:
- ret = wlan_get_tsf_ioctl(priv, wrq);
- break;
- }
- break;
-
case WLAN_SET128CHAR_GET128CHAR:
switch ((int)wrq->u.data.flags) {
-
- case WLANSCAN_MODE:
- lbs_pr_debug(1, "Scan mode Ioctl\n");
- ret = wlan_scan_mode_ioctl(priv, wrq);
- break;
-
- case WLAN_GET_ADHOC_STATUS:
- ret = wlan_get_adhoc_status_ioctl(priv, wrq);
- break;
case WLAN_SUBCMD_BT_ADD:
ret = wlan_bt_add_ioctl(priv, req);
break;
@@ -2008,40 +888,10 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
case WLAN_SETNONE_GETONEINT:
switch ((int)req->ifr_data) {
- case WLANGETBCNAVG:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->bcn_avg_factor;
- break;
-
case WLANGETREGION:
pdata = (int *)wrq->u.name;
*pdata = (int)adapter->regioncode;
break;
-
- case WLAN_GET_LISTEN_INTERVAL:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->listeninterval;
- break;
-
- case WLAN_GET_LINKMODE:
- req->ifr_data = (char *)((u32) adapter->linkmode);
- break;
-
- case WLAN_GET_RADIOMODE:
- req->ifr_data = (char *)((u32) adapter->radiomode);
- break;
-
- case WLAN_GET_DEBUGMODE:
- req->ifr_data = (char *)((u32) adapter->debugmode);
- break;
-
- case WLAN_GET_MULTIPLE_DTIM:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->multipledtim;
- break;
- case WLAN_GET_TX_RATE:
- ret = wlan_get_txrate_ioctl(priv, req);
- break;
case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */
ret = wlan_fwt_cleanup_ioctl(priv, req);
break;
@@ -2061,196 +911,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
break;
- case WLANGETLOG:
- ret = wlan_do_getlog_ioctl(priv, wrq);
- break;
-
case WLAN_SET_GET_SIXTEEN_INT:
switch ((int)wrq->u.data.flags) {
- case WLAN_TPCCFG:
- {
- int data[5];
- struct cmd_ds_802_11_tpc_cfg cfg;
- memset(&cfg, 0, sizeof(cfg));
- if ((wrq->u.data.length > 1)
- && (wrq->u.data.length != 5))
- return -1;
-
- if (wrq->u.data.length == 0) {
- cfg.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 5)) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- cfg.action =
- cpu_to_le16
- (cmd_act_set);
- cfg.enable = data[0];
- cfg.usesnr = data[1];
- cfg.P0 = data[2];
- cfg.P1 = data[3];
- cfg.P2 = data[4];
- }
-
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_tpc_cfg,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&cfg);
-
- data[0] = cfg.enable;
- data[1] = cfg.usesnr;
- data[2] = cfg.P0;
- data[3] = cfg.P1;
- data[4] = cfg.P2;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 5)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 5;
- }
- break;
-
- case WLAN_POWERCFG:
- {
- int data[4];
- struct cmd_ds_802_11_pwr_cfg cfg;
- memset(&cfg, 0, sizeof(cfg));
- if ((wrq->u.data.length > 1)
- && (wrq->u.data.length != 4))
- return -1;
- if (wrq->u.data.length == 0) {
- cfg.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 4)) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- cfg.action =
- cpu_to_le16
- (cmd_act_set);
- cfg.enable = data[0];
- cfg.PA_P0 = data[1];
- cfg.PA_P1 = data[2];
- cfg.PA_P2 = data[3];
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_pwr_cfg,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&cfg);
- data[0] = cfg.enable;
- data[1] = cfg.PA_P0;
- data[2] = cfg.PA_P1;
- data[3] = cfg.PA_P2;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 4)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 4;
- }
- break;
- case WLAN_AUTO_FREQ_SET:
- {
- int data[3];
- struct cmd_ds_802_11_afc afc;
- memset(&afc, 0, sizeof(afc));
- if (wrq->u.data.length != 3)
- return -1;
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 3)) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- afc.afc_auto = data[0];
-
- if (afc.afc_auto != 0) {
- afc.threshold = data[1];
- afc.period = data[2];
- } else {
- afc.timing_offset = data[1];
- afc.carrier_offset = data[2];
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_set_afc,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&afc);
- }
- break;
- case WLAN_AUTO_FREQ_GET:
- {
- int data[3];
- struct cmd_ds_802_11_afc afc;
- memset(&afc, 0, sizeof(afc));
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_get_afc,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&afc);
- data[0] = afc.afc_auto;
- data[1] = afc.timing_offset;
- data[2] = afc.carrier_offset;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 3)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 3;
- }
- break;
- case WLAN_SCANPROBES:
- {
- int data;
- if (wrq->u.data.length > 0) {
- if (copy_from_user
- (&data, wrq->u.data.pointer,
- sizeof(int))) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->scanprobes = data;
- } else {
- data = adapter->scanprobes;
- if (copy_to_user
- (wrq->u.data.pointer, &data,
- sizeof(int))) {
- lbs_pr_debug(1,
- "Copy to user failed\n");
- return -EFAULT;
- }
- }
- wrq->u.data.length = 1;
- }
- break;
case WLAN_LED_GPIO_CTRL:
{
int i;
@@ -2314,17 +976,6 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
wrq->u.data.length = gpio->header.len;
}
break;
- case WLAN_ADAPT_RATESET:
- ret = wlan_adapt_rateset(priv, wrq);
- break;
- case WLAN_INACTIVITY_TIMEOUT:
- ret = wlan_inactivity_timeout(priv, wrq);
- break;
- case WLANSNR:
- ret = wlan_get_snr(priv, wrq);
- break;
- case WLAN_GET_RXINFO:
- ret = wlan_get_rxinfo(priv, wrq);
}
break;
diff --git a/drivers/net/wireless/libertas/join.c b/drivers/net/wireless/libertas/join.c
index 2292c14a153..ec40d32183e 100644
--- a/drivers/net/wireless/libertas/join.c
+++ b/drivers/net/wireless/libertas/join.c
@@ -96,20 +96,6 @@ int libertas_send_deauth(wlan_private * priv)
return ret;
}
-int libertas_do_adhocstop_ioctl(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- if (adapter->mode == IW_MODE_ADHOC &&
- adapter->connect_status == libertas_connected)
- ret = libertas_stop_adhoc_network(priv);
- else
- ret = -ENOTSUPP;
-
- return ret;
-}
-
/**
* @brief Associate to a specific BSS discovered in a scan
*
@@ -262,127 +248,6 @@ int libertas_send_deauthentication(wlan_private * priv)
}
/**
- * @brief Set Idle Off
- *
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-int libertas_idle_off(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
- const u8 zeromac[] = { 0, 0, 0, 0, 0, 0 };
- int i;
-
- ENTER();
-
- if (adapter->connect_status == libertas_disconnected) {
- if (adapter->mode == IW_MODE_INFRA) {
- if (memcmp(adapter->previousbssid, zeromac,
- sizeof(zeromac)) != 0) {
-
- lbs_pr_debug(1, "Previous SSID = %s\n",
- adapter->previousssid.ssid);
- lbs_pr_debug(1, "Previous BSSID = "
- "%02x:%02x:%02x:%02x:%02x:%02x:\n",
- adapter->previousbssid[0],
- adapter->previousbssid[1],
- adapter->previousbssid[2],
- adapter->previousbssid[3],
- adapter->previousbssid[4],
- adapter->previousbssid[5]);
-
- i = libertas_find_SSID_in_list(adapter,
- &adapter->previousssid,
- adapter->previousbssid,
- adapter->mode);
-
- if (i < 0) {
- libertas_send_specific_BSSID_scan(priv,
- adapter->
- previousbssid,
- 1);
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid,
- adapter->
- previousbssid,
- adapter->mode);
- }
-
- if (i < 0) {
- /* If the BSSID could not be found, try just the SSID */
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid, NULL,
- adapter->mode);
- }
-
- if (i < 0) {
- libertas_send_specific_SSID_scan(priv,
- &adapter->
- previousssid,
- 1);
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid, NULL,
- adapter->mode);
- }
-
- if (i >= 0) {
- ret =
- wlan_associate(priv,
- &adapter->
- scantable[i]);
- }
- }
- } else if (adapter->mode == IW_MODE_ADHOC) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_ad_hoc_start,
- 0,
- cmd_option_waitforrsp,
- 0, &adapter->previousssid);
- }
- }
- /* else it is connected */
-
- lbs_pr_debug(1, "\nwlanidle is off");
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set Idle On
- *
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-int libertas_idle_on(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- if (adapter->connect_status == libertas_connected) {
- if (adapter->mode == IW_MODE_INFRA) {
- lbs_pr_debug(1, "Previous SSID = %s\n",
- adapter->previousssid.ssid);
- memmove(&adapter->previousssid,
- &adapter->curbssparams.ssid,
- sizeof(struct WLAN_802_11_SSID));
- libertas_send_deauth(priv);
-
- } else if (adapter->mode == IW_MODE_ADHOC) {
- ret = libertas_stop_adhoc_network(priv);
- }
-
- }
-
- lbs_pr_debug(1, "\nwlanidle is on");
-
- return ret;
-}
-
-/**
* @brief This function prepares command of authenticate.
*
* @param priv A pointer to wlan_private structure
diff --git a/drivers/net/wireless/libertas/join.h b/drivers/net/wireless/libertas/join.h
index 0e6d9288506..115f5a8ba34 100644
--- a/drivers/net/wireless/libertas/join.h
+++ b/drivers/net/wireless/libertas/join.h
@@ -37,10 +37,6 @@ extern int libertas_ret_80211_disassociate(wlan_private * priv,
extern int libertas_ret_80211_associate(wlan_private * priv,
struct cmd_ds_command *resp);
-extern int libertas_idle_on(wlan_private * priv);
-extern int libertas_idle_off(wlan_private * priv);
-
-extern int libertas_do_adhocstop_ioctl(wlan_private * priv);
extern int libertas_reassociation_thread(void *data);
struct WLAN_802_11_SSID;
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index c62ffcd214c..69f52b6e59c 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -986,137 +986,18 @@ static const struct iw_priv_args wlan_private_args[] = {
/*
* { cmd, set_args, get_args, name }
*/
- {
- WLANSCAN_TYPE,
- IW_PRIV_TYPE_CHAR | 8,
- IW_PRIV_TYPE_CHAR | 8,
- "scantype"},
-
- {
- WLAN_SETINT_GETINT,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- ""},
- {
- WLANNF,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getNF"},
- {
- WLANRSSI,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getRSSI"},
- {
- WLANENABLE11D,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "enable11d"},
- {
- WLANADHOCGRATE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "adhocgrate"},
-
- {
- WLAN_SUBCMD_SET_PRESCAN,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "prescan"},
- {
- WLAN_SETONEINT_GETONEINT,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- ""},
- {
- WLAN_BEACON_INTERVAL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "bcninterval"},
- {
- WLAN_LISTENINTRVL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "lolisteninter"},
- {
- WLAN_TXCONTROL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "txcontrol"},
- {
- WLAN_NULLPKTINTERVAL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "psnullinterval"},
/* Using iwpriv sub-command feature */
{
WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
""},
-
- {
- WLAN_SUBCMD_SETRXANTENNA,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setrxant"},
- {
- WLAN_SUBCMD_SETTXANTENNA,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "settxant"},
- {
- WLANSETENCRYPTIONMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "encryptionmode",
- },
{
WLANSETREGION,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
"setregioncode"},
{
- WLAN_SET_LISTEN_INTERVAL,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setlisteninter"},
- {
- WLAN_SET_MULTIPLE_DTIM,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setmultipledtim"},
- {
- WLAN_SET_ATIM_WINDOW,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "atimwindow"},
- {
- WLANSETBCNAVG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setbcnavg"},
- {
- WLANSETDATAAVG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setdataavg"},
- {
- WLAN_SET_LINKMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "linkmode"},
- {
- WLAN_SET_RADIOMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "radiomode"},
- {
- WLAN_SET_DEBUGMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "debugmode"},
- {
WLAN_SUBCMD_MESH_SET_TTL,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
@@ -1132,41 +1013,6 @@ static const struct iw_priv_args wlan_private_args[] = {
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"getregioncode"},
{
- WLAN_GET_LISTEN_INTERVAL,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getlisteninter"},
- {
- WLAN_GET_MULTIPLE_DTIM,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getmultipledtim"},
- {
- WLAN_GET_TX_RATE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "gettxrate"},
- {
- WLANGETBCNAVG,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getbcnavg"},
- {
- WLAN_GET_LINKMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_linkmode"},
- {
- WLAN_GET_RADIOMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_radiomode"},
- {
- WLAN_GET_DEBUGMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_debugmode"},
- {
WLAN_SUBCMD_FWT_CLEANUP,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
@@ -1182,61 +1028,11 @@ static const struct iw_priv_args wlan_private_args[] = {
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"mesh_get_ttl"},
{
- WLAN_SETNONE_GETTWELVE_CHAR,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- ""},
- {
- WLAN_SUBCMD_GETRXANTENNA,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "getrxant"},
- {
- WLAN_SUBCMD_GETTXANTENNA,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "gettxant"},
- {
- WLAN_GET_TSF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "gettsf"},
- {
WLAN_SETNONE_GETNONE,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
""},
{
- WLANDEAUTH,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "deauth"},
- {
- WLANADHOCSTOP,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "adhocstop"},
- {
- WLANRADIOON,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "radioon"},
- {
- WLANRADIOOFF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "radiooff"},
- {
- WLANWLANIDLEON,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "wlanidle-on"},
- {
- WLANWLANIDLEOFF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "wlanidle-off"},
- {
WLAN_SUBCMD_FWT_RESET,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
@@ -1299,85 +1095,15 @@ static const struct iw_priv_args wlan_private_args[] = {
IW_PRIV_TYPE_CHAR | 128,
"fwt_list_route"},
{
- WLANSCAN_MODE,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "scanmode"},
- {
- WLAN_GET_ADHOC_STATUS,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "getadhocstatus"},
- {
- WLAN_SETNONE_GETWORDCHAR,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 128,
- ""},
- {
- WLANGETLOG,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | GETLOG_BUFSIZE,
- "getlog"},
- {
WLAN_SET_GET_SIXTEEN_INT,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
""},
{
- WLAN_TPCCFG,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "tpccfg"},
- {
- WLAN_POWERCFG,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "powercfg"},
- {
- WLAN_AUTO_FREQ_SET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "setafc"},
- {
- WLAN_AUTO_FREQ_GET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getafc"},
- {
- WLAN_SCANPROBES,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "scanprobes"},
- {
WLAN_LED_GPIO_CTRL,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
"ledgpio"},
- {
- WLAN_ADAPT_RATESET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "rateadapt"},
- {
- WLAN_INACTIVITY_TIMEOUT,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "inactivityto"},
- {
- WLANSNR,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getSNR"},
- {
- WLAN_GET_RATE,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getrate"},
- {
- WLAN_GET_RXINFO,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getrxinfo"},
};
static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
index 39f367c38d9..15cfaaf0797 100644
--- a/drivers/net/wireless/libertas/wext.h
+++ b/drivers/net/wireless/libertas/wext.h
@@ -10,88 +10,22 @@
/** PRIVATE CMD ID */
#define WLANIOCTL SIOCIWFIRSTPRIV
-#define WLANSETWPAIE (WLANIOCTL + 0)
-
-#define WLAN_SETINT_GETINT (WLANIOCTL + 7)
-#define WLANNF 1
-#define WLANRSSI 2
-#define WLANENABLE11D 5
-#define WLANADHOCGRATE 6
-#define WLAN_SUBCMD_SET_PRESCAN 11
-
#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8)
-#define WLANDEAUTH 1
-#define WLANRADIOON 2
-#define WLANRADIOOFF 3
-#define WLANREMOVEADHOCAES 4
-#define WLANADHOCSTOP 5
-#define WLANCIPHERTEST 6
-#define WLANCRYPTOTEST 7
-
-#define WLANWLANIDLEON 10
-#define WLANWLANIDLEOFF 11
#define WLAN_SUBCMD_BT_RESET 13
#define WLAN_SUBCMD_FWT_RESET 14
-#define WLANGETLOG (WLANIOCTL + 9)
-#define GETLOG_BUFSIZE 300
-
-#define WLANSCAN_TYPE (WLANIOCTL + 11)
-
#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15)
#define WLANGETREGION 1
-#define WLAN_GET_LISTEN_INTERVAL 2
-#define WLAN_GET_MULTIPLE_DTIM 3
-#define WLAN_GET_TX_RATE 4
-#define WLANGETBCNAVG 5
-#define WLAN_GET_LINKMODE 6
-#define WLAN_GET_RADIOMODE 7
-#define WLAN_GET_DEBUGMODE 8
#define WLAN_SUBCMD_FWT_CLEANUP 15
#define WLAN_SUBCMD_FWT_TIME 16
#define WLAN_SUBCMD_MESH_GET_TTL 17
-#define WLANREGCFRDWR (WLANIOCTL + 18)
-
-#define WLAN_SETNONE_GETTWELVE_CHAR (WLANIOCTL + 19)
-#define WLAN_SUBCMD_GETRXANTENNA 1
-#define WLAN_SUBCMD_GETTXANTENNA 2
-#define WLAN_GET_TSF 3
-
-#define WLAN_SETNONE_GETWORDCHAR (WLANIOCTL + 21)
-#define WLANGETADHOCAES 1
-
-#define WLAN_SETONEINT_GETONEINT (WLANIOCTL + 23)
-#define WLAN_BEACON_INTERVAL 1
-#define WLAN_LISTENINTRVL 4
-
-#define WLAN_TXCONTROL 6
-#define WLAN_NULLPKTINTERVAL 7
-
#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24)
-#define WLAN_SUBCMD_SETRXANTENNA 1
-#define WLAN_SUBCMD_SETTXANTENNA 2
-#define WLANSETAUTHALG 5
-#define WLANSET8021XAUTHALG 6
-#define WLANSETENCRYPTIONMODE 7
#define WLANSETREGION 8
-#define WLAN_SET_LISTEN_INTERVAL 9
-
-#define WLAN_SET_MULTIPLE_DTIM 10
-#define WLAN_SET_ATIM_WINDOW 11
-#define WLANSETBCNAVG 13
-#define WLANSETDATAAVG 14
-#define WLAN_SET_LINKMODE 15
-#define WLAN_SET_RADIOMODE 16
-#define WLAN_SET_DEBUGMODE 17
#define WLAN_SUBCMD_MESH_SET_TTL 18
#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25)
-#define WLANSCAN_MODE 6
-
-#define WLAN_GET_ADHOC_STATUS 9
-
#define WLAN_SUBCMD_BT_ADD 18
#define WLAN_SUBCMD_BT_DEL 19
#define WLAN_SUBCMD_BT_LIST 20
@@ -103,27 +37,8 @@
#define WLAN_SUBCMD_FWT_LIST_ROUTE 26
#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29)
-#define WLAN_TPCCFG 1
-#define WLAN_POWERCFG 2
-
-#define WLAN_AUTO_FREQ_SET 3
-#define WLAN_AUTO_FREQ_GET 4
#define WLAN_LED_GPIO_CTRL 5
-#define WLAN_SCANPROBES 6
-#define WLAN_ADAPT_RATESET 8
-#define WLAN_INACTIVITY_TIMEOUT 9
-#define WLANSNR 10
-#define WLAN_GET_RATE 11
-#define WLAN_GET_RXINFO 12
-
-#define WLANCMD52RDWR (WLANIOCTL + 30)
-#define WLANCMD53RDWR (WLANIOCTL + 31)
-#define CMD53BUFLEN 32
-#define REG_MAC 0x19
-#define REG_BBP 0x1a
-#define REG_RF 0x1b
-#define REG_EEPROM 0x59
#define WLAN_LINKMODE_802_3 0
#define WLAN_LINKMODE_802_11 2
#define WLAN_RADIOMODE_NONE 0