diff options
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 32 |
1 files changed, 19 insertions, 13 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8a8a6b9fb05..a63c0aac0d0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -294,7 +294,7 @@ struct ftdi_private { __u16 interface; /* FT2232C port interface (0 for FT232/245) */ - int force_baud; /* if non-zero, force the baud rate to this value */ + speed_t force_baud; /* if non-zero, force the baud rate to this value */ int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ spinlock_t tx_lock; /* spinlock for transmit state */ @@ -878,6 +878,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (div_value == 0) { dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); div_value = ftdi_sio_b9600; + baud = 9600; div_okay = 0; } break; @@ -886,6 +887,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) div_value = ftdi_232am_baud_to_divisor(baud); } else { dbg("%s - Baud rate too high!", __FUNCTION__); + baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; } @@ -899,6 +901,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) dbg("%s - Baud rate too high!", __FUNCTION__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; + baud = 9600; } break; } /* priv->chip_type */ @@ -909,6 +912,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) ftdi_chip_name[priv->chip_type]); } + tty_encode_baud_rate(port->tty, baud, baud); return(div_value); } @@ -1263,7 +1267,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; - priv->force_baud = B38400; + priv->force_baud = 38400; } /* ftdi_USB_UIRT_setup */ /* Setup for the HE-TIRA1 device, which requires hardwired @@ -1274,7 +1278,7 @@ static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv) priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; - priv->force_baud = B38400; + priv->force_baud = 38400; priv->force_rtscts = 1; } /* ftdi_HE_TIRA1_setup */ @@ -1363,7 +1367,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) /* ftdi_set_termios will send usb control messages */ if (port->tty) - ftdi_set_termios(port, NULL); + ftdi_set_termios(port, port->tty->termios); /* FIXME: Flow control might be enabled, so it should be checked - we have no control of defaults! */ @@ -1933,32 +1937,32 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { /* ftdi_termios */ struct usb_device *dev = port->serial->dev; - unsigned int cflag = port->tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); + struct ktermios *termios = port->tty->termios; + unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ char buf[1]; /* Perhaps I should dynamically alloc this? */ // Added for xon/xoff support - unsigned int iflag = port->tty->termios->c_iflag; + unsigned int iflag = termios->c_iflag; unsigned char vstop; unsigned char vstart; dbg("%s", __FUNCTION__); /* Force baud rate if this device requires it, unless it is set to B0. */ - if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) { + if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { dbg("%s: forcing baud rate for this device", __FUNCTION__); - port->tty->termios->c_cflag &= ~CBAUD; - port->tty->termios->c_cflag |= priv->force_baud; + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); } /* Force RTS-CTS if this device requires it. */ if (priv->force_rtscts) { dbg("%s: forcing rtscts for this device", __FUNCTION__); - port->tty->termios->c_cflag |= CRTSCTS; + termios->c_cflag |= CRTSCTS; } - cflag = port->tty->termios->c_cflag; + cflag = termios->c_cflag; /* FIXME -For this cut I don't care if the line is really changing or not - so just do the change regardless - should be able to @@ -1969,6 +1973,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old /* Set number of data bits, parity, stop bits */ + termios->c_cflag &= ~CMSPAR; + urb_value = 0; urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : FTDI_SIO_SET_DATA_STOP_BITS_1); @@ -2048,8 +2054,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old // Set the vstart and vstop -- could have been done up above where // a lot of other dereferencing is done but that would be very // inefficient as vstart and vstop are not always needed - vstart=port->tty->termios->c_cc[VSTART]; - vstop=port->tty->termios->c_cc[VSTOP]; + vstart = termios->c_cc[VSTART]; + vstop = termios->c_cc[VSTOP]; urb_value=(vstop << 8) | (vstart); if (usb_control_msg(dev, |