diff options
84 files changed, 4260 insertions, 2084 deletions
@@ -2247,6 +2247,12 @@ S: 249 Nichols Avenue S: Syracuse, New York 13206 S: USA +N: Kyle McMartin +E: kyle@parisc-linux.org +D: Linux/PARISC hacker +D: AD1889 sound driver +S: Ottawa, Canada + N: Dirk Melchers E: dirk@merlin.nbg.sub.org D: 8 bit XT hard disk driver for OMTI5520 diff --git a/MAINTAINERS b/MAINTAINERS index 767fb610963..248b93b32fc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -197,6 +197,15 @@ M: Thorsten Knabe <linux@thorsten-knabe.de> W: http://linux.thorsten-knabe.de S: Maintained +AD1889 SOUND DRIVER +P: Kyle McMartin +M: kyle@parisc-linux.org +P: Thibaut Varene +M: T-Bone@parisc-linux.org +W: http://wiki.parisc-linux.org/AD1889 +L: parisc-linux@lists.parisc-linux.org +S: Maintained + ADM1025 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 0b07922a2ac..874a283edb9 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,10 +47,10 @@ config PM config ISA_DMA_API bool - default y config ARCH_MAY_HAVE_PC_FDC bool + depends on BROKEN default y source "init/Kconfig" @@ -154,13 +154,14 @@ config HOTPLUG_CPU config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous memory support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on 64BIT && EXPERIMENTAL help Say Y to support efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "kernel/Kconfig.hz" source "mm/Kconfig" config PREEMPT diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 3b339b1cce1..9b7e42490dd 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -20,7 +20,8 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 ifdef CONFIG_64BIT -CROSS_COMPILE := hppa64-linux- +CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \ + echo hppa64-linux-gnu-; else echo hppa64-linux-; fi) UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 else @@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align OBJCOPY_FLAGS =-O binary -R .note -R .comment -S +GCC_VERSION := $(call cc-version) +ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),) +$(error Sorry, couldn't find ($(cc-version)).) +endif +ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),) +$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.) +endif + cflags-y := -pipe # These flags should be implied by an hppa-linux configuration, but they @@ -43,7 +52,7 @@ cflags-y += -mno-space-regs -mfast-indirect-calls # Currently we save and restore fpregs on all kernel entry/interruption paths. # If that gets optimized, we might need to disable the use of fpregs in the # kernel. -#cflags-y += -mdisable-fpregs +cflags-y += -mdisable-fpregs # Without this, "ld -r" results in .text sections that are too big # (> 0x40000) for branches to reach stubs. diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 6efaa9293ee..3e013f55df6 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:20:32 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:34 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,9 +74,18 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y # CONFIG_GSC_WAX is not set # CONFIG_EISA is not set # CONFIG_PCI is not set -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # # -# PCI Hotplug Support +# PA-RISC specific drivers # +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y -CONFIG_53C700_LE_ON_BE=y -# CONFIG_SCSI_ZALON is not set -CONFIG_SCSI_DEBUG=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -243,12 +132,14 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -262,8 +153,10 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration @@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -279,11 +173,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_CT_ACCT is not set CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -# CONFIG_IP_NF_NAT_LOCAL is not set CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m @@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_XFRM=y -CONFIG_XFRM_USER=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) @@ -362,10 +263,6 @@ CONFIG_LLC2=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -373,17 +270,162 @@ CONFIG_LLC2=m # Network testing # CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_ZALON is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -391,6 +433,7 @@ CONFIG_TUN=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y # # CONFIG_STRIP is not set # CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Wan interfaces @@ -431,6 +475,8 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -460,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y @@ -494,6 +528,19 @@ CONFIG_MOUSE_HIL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -546,12 +592,14 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -562,10 +610,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=128 CONFIG_DUMMY_CONSOLE_ROWS=48 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -610,6 +676,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -657,10 +724,6 @@ CONFIG_SND_HARMONY=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -671,10 +734,20 @@ CONFIG_SND_HARMONY=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -682,20 +755,24 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -# CONFIG_TMPFS_SECURITY is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -754,16 +828,19 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -778,6 +855,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -838,13 +916,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -882,9 +967,14 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index 30fc03ed0cf..955ef5084f3 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4-pa1 -# Wed Feb 16 11:32:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:54 2005 # CONFIG_PARISC=y CONFIG_MMU=y @@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -74,7 +82,19 @@ CONFIG_PREFETCH=y CONFIG_64BIT=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y @@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -104,7 +126,6 @@ CONFIG_CARDBUS=y CONFIG_YENTA=m CONFIG_PD6729=m CONFIG_I82092=m -CONFIG_TCIC=m CONFIG_PCCARD_NONSTATIC=m # @@ -127,6 +148,203 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +# CONFIG_IP6_NF_MATCH_OWNER is not set +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +# CONFIG_IP6_NF_MATCH_LENGTH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -139,6 +357,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers @@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set @@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA22XX is not set CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -303,153 +529,13 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration +# Network device support # -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -457,12 +543,18 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m @@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set CONFIG_PCMCIA_XIRCOM=m # CONFIG_PCMCIA_XIRTULIP is not set CONFIG_HP100=m @@ -489,48 +582,43 @@ CONFIG_PCNET32=m # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m +# CONFIG_EEPRO100 is not set CONFIG_E100=m -CONFIG_E100_NAPI=y # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set -CONFIG_EPIC100=m +# CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m +# CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=m -CONFIG_IXGB_NAPI=y -CONFIG_S2IO=m -CONFIG_S2IO_NAPI=y -# CONFIG_2BUFF_MODE is not set +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices @@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=m # CONFIG_ATMEL is not set @@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m @@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -633,13 +726,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -649,6 +735,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set @@ -708,6 +800,11 @@ CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -718,10 +815,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 +# CONFIG_STI_CONSOLE is not set # # Sound @@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # InfiniBand support # -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -794,22 +899,20 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -867,15 +968,18 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -890,6 +994,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m +# CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set -CONFIG_NLS_CODEPAGE_863=m +# CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set -CONFIG_NLS_CODEPAGE_865=m +# CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set @@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set @@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_IOREMAP is not set @@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m @@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 46c9511f322..8819e7e6ae3 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:35:54 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:10 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options @@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_EXPERIMENTAL is not set CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -60,8 +69,14 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# PA-RISC specific drivers +# CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -91,6 +120,64 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -99,9 +186,15 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -111,10 +204,8 @@ CONFIG_STANDALONE=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=y # # ATA/ATAPI/MFM/RLL support @@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set @@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -347,6 +388,11 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_LASI_82596 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -369,6 +415,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set @@ -384,12 +431,15 @@ CONFIG_TULIP=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -435,6 +485,8 @@ CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -464,23 +516,12 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -# CONFIG_HP_SDC is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set @@ -502,6 +543,19 @@ CONFIG_INPUT_MISC=y # CONFIG_HP_SDC_RTC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +# CONFIG_HP_SDC is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -555,11 +613,14 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -570,10 +631,20 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -595,6 +671,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -606,18 +683,19 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -658,23 +733,36 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -697,11 +785,10 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -719,15 +806,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -815,6 +912,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -832,8 +930,13 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_TEST is not set # +# Hardware crypto devices +# + +# # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index 67aca6ccc9b..9d86b6b1ebd 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:26:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:31 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -66,10 +76,19 @@ CONFIG_KMOD=y CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y -# CONFIG_PARISC64 is not set # CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -79,13 +98,10 @@ CONFIG_PREFETCH=y # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y -CONFIG_SUPERIO=y -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # +# CONFIG_HOTPLUG_PCI is not set # -# PCI Hotplug Support +# PA-RISC specific drivers # -# CONFIG_HOTPLUG_PCI is not set +CONFIG_SUPERIO=y +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -108,6 +128,186 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +CONFIG_NETFILTER_DEBUG=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +CONFIG_IP6_NF_MATCH_OWNER=m +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +CONFIG_IP6_NF_MATCH_LENGTH=m +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_RAW is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -120,6 +320,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=m +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set CONFIG_SCSI_SATA_PROMISE=m +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=m # CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set -CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA6322=m +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set -CONFIG_MD_MULTIPATH=y +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -342,151 +556,13 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_DEBUG=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -494,12 +570,18 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m -CONFIG_HAPPYMEAL=m +# CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y -CONFIG_PCNET32=m +# CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set -CONFIG_ADAPTEC_STARFIRE=m -# CONFIG_ADAPTEC_STARFIRE_NAPI is not set -CONFIG_B44=m +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set +# CONFIG_EEPRO100 is not set CONFIG_E100=m -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -554,15 +630,18 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=y -CONFIG_IXGB_NAPI=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set # CONFIG_S2IO is not set # @@ -593,6 +672,8 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -622,16 +703,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -649,6 +720,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,12 +779,16 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -714,10 +799,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -739,6 +839,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -751,18 +852,20 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -775,6 +878,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -784,7 +888,78 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set # # Open Sound System @@ -794,6 +969,8 @@ CONFIG_SOUND=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m @@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y +CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y @@ -846,21 +1022,25 @@ CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -CONFIG_USB_KBTAB=m +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices @@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m @@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -920,27 +1102,41 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -996,16 +1190,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_HMAC is not set CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set @@ -1117,9 +1322,14 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index fdae21c503d..f38a4620d24 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,38 +1,56 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:01:33 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y CONFIG_PA7000=y # CONFIG_PA7100LC is not set # CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# PA-RISC specific drivers +# CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y CONFIG_PDC_CHASSIS=y +CONFIG_PDC_STABLE=y # # Executable file formats @@ -81,15 +125,97 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set CONFIG_SCSI_ZALON=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_LASI_82596=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set @@ -336,6 +430,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -361,30 +456,37 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # -# CONFIG_ACENIC is not set -CONFIG_DL2K=y +CONFIG_ACENIC=y +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -CONFIG_AIRO=y # CONFIG_HERMES is not set # CONFIG_ATMEL is not set -CONFIG_NET_WIRELESS=y # -# Token Ring devices +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -460,51 +554,67 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_PCIPS2 is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_HIL is not set CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDDLER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set -# CONFIG_INPUT_JOYDUMP is not set +# CONFIG_JOYSTICK_JOYDUMP is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_UINPUT is not set CONFIG_HP_SDC_RTC=y # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_MUX is not set -# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_MUX=y +CONFIG_SERIAL_MUX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -541,12 +651,6 @@ CONFIG_PRINTER=y # CONFIG_TIPAR is not set # -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# # IPMI # # CONFIG_IPMI_HANDLER is not set @@ -555,7 +659,6 @@ CONFIG_PRINTER=y # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -565,21 +668,40 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set # +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y # Logo configuration # # CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -638,17 +772,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# GSC devices +# +CONFIG_SND_HARMONY=y # # Open Sound System # # CONFIG_SOUND_PRIME is not set -# CONFIG_SOUND_HARMONY is not set # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# # CONFIG_USB_STORAGE is not set # -# USB Human Interface Devices (HID) +# USB Input Devices # # CONFIG_USB_HID is not set @@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y # # -# USB Network adaptors +# USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y # # USB port drivers @@ -732,12 +962,21 @@ CONFIG_USB_OHCI_HCD=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# # # USB Gadget Support @@ -745,22 +984,41 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -773,7 +1031,8 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -781,11 +1040,11 @@ CONFIG_JOLIET=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -809,23 +1068,28 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_RWLOCK is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # +# Hardware crypto devices +# + +# # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index f46a07a7921..e15f09eaed1 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -27,6 +27,7 @@ #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/processor.h> +#include <asm/sections.h> int split_tlb; int dcache_stride; @@ -207,6 +208,9 @@ parisc_cache_init(void) /* "New and Improved" version from Jim Hull * (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift)) + * The following CAFL_STRIDE is an optimized version, see + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html */ #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift)) dcache_stride = CAFL_STRIDE(cache_info.dc_conf); @@ -339,17 +343,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD; void parisc_setup_cache_timing(void) { unsigned long rangetime, alltime; - extern char _text; /* start of kernel code, defined by linker */ - extern char _end; /* end of BSS, defined by linker */ unsigned long size; alltime = mfctl(16); flush_data_cache(); alltime = mfctl(16) - alltime; - size = (unsigned long)(&_end - _text); + size = (unsigned long)(_end - _text); rangetime = mfctl(16); - flush_kernel_dcache_range((unsigned long)&_text, size); + flush_kernel_dcache_range((unsigned long)_text, size); rangetime = mfctl(16) - rangetime; printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n", diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index d34bbe7ae0e..988844a169e 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -46,36 +46,51 @@ static struct device root = { .bus_id = "parisc", }; -#define for_each_padev(padev) \ - for (padev = next_dev(&root); padev != NULL; \ - padev = next_dev(&padev->dev)) +static inline int check_dev(struct device *dev) +{ + if (dev->bus == &parisc_bus_type) { + struct parisc_device *pdev; + pdev = to_parisc_device(dev); + return pdev->id.hw_type != HPHW_FAULTY; + } + return 1; +} + +static struct device * +parse_tree_node(struct device *parent, int index, struct hardware_path *modpath); -#define check_dev(padev) \ - (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev) +struct recurse_struct { + void * obj; + int (*fn)(struct device *, void *); +}; + +static int descend_children(struct device * dev, void * data) +{ + struct recurse_struct * recurse_data = (struct recurse_struct *)data; + + if (recurse_data->fn(dev, recurse_data->obj)) + return 1; + else + return device_for_each_child(dev, recurse_data, descend_children); +} /** - * next_dev - enumerates registered devices - * @dev: the previous device returned from next_dev + * for_each_padev - Iterate over all devices in the tree + * @fn: Function to call for each device. + * @data: Data to pass to the called function. * - * next_dev does a depth-first search of the tree, returning parents - * before children. Returns NULL when there are no more devices. + * This performs a depth-first traversal of the tree, calling the + * function passed for each node. It calls the function for parents + * before children. */ -static struct parisc_device *next_dev(struct device *dev) -{ - if (!list_empty(&dev->children)) { - dev = list_to_dev(dev->children.next); - return check_dev(to_parisc_device(dev)); - } - while (dev != &root) { - if (dev->node.next != &dev->parent->children) { - dev = list_to_dev(dev->node.next); - return to_parisc_device(dev); - } - dev = dev->parent; - } - - return NULL; +static int for_each_padev(int (*fn)(struct device *, void *), void * data) +{ + struct recurse_struct recurse_data = { + .obj = data, + .fn = fn, + }; + return device_for_each_child(&root, &recurse_data, descend_children); } /** @@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev) return 0; } -static void claim_device(struct parisc_driver *driver, struct parisc_device *dev) -{ - dev->driver = driver; - request_mem_region(dev->hpa, 0x1000, driver->name); -} - static int parisc_driver_probe(struct device *dev) { int rc; @@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev) rc = pa_drv->probe(pa_dev); - if(!rc) - claim_device(pa_drv, pa_dev); + if (!rc) + pa_dev->driver = pa_drv; return rc; } @@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev) struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); if (pa_drv->remove) pa_drv->remove(pa_dev); - release_mem_region(pa_dev->hpa, 0x1000); return 0; } @@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(register_parisc_driver); + +struct match_count { + struct parisc_driver * driver; + int count; +}; + +static int match_and_count(struct device * dev, void * data) +{ + struct match_count * m = data; + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) { + if (match_device(m->driver, pdev)) + m->count++; + } + return 0; +} + /** * count_parisc_driver - count # of devices this driver would match * @driver: the PA-RISC driver to try @@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver); */ int count_parisc_driver(struct parisc_driver *driver) { - struct parisc_device *device; - int cnt = 0; + struct match_count m = { + .driver = driver, + .count = 0, + }; - for_each_padev(device) { - if (match_device(driver, device)) - cnt++; - } + for_each_padev(match_and_count, &m); - return cnt; + return m.count; } @@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(unregister_parisc_driver); -static struct parisc_device *find_device_by_addr(unsigned long hpa) +struct find_data { + unsigned long hpa; + struct parisc_device * dev; +}; + +static int find_device(struct device * dev, void * data) { - struct parisc_device *dev; - for_each_padev(dev) { - if (dev->hpa == hpa) - return dev; + struct parisc_device * pdev = to_parisc_device(dev); + struct find_data * d = (struct find_data*)data; + + if (check_dev(dev)) { + if (pdev->hpa.start == d->hpa) { + d->dev = pdev; + return 1; + } } - return NULL; + return 0; +} + +static struct parisc_device *find_device_by_addr(unsigned long hpa) +{ + struct find_data d = { + .hpa = hpa, + }; + int ret; + + ret = for_each_padev(find_device, &d); + return ret ? d.dev : NULL; } /** @@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent) return dev; } +struct match_id_data { + char id; + struct parisc_device * dev; +}; + +static int match_by_id(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + struct match_id_data * d = data; + + if (pdev->hw_path == d->id) { + d->dev = pdev; + return 1; + } + return 0; +} + /** * alloc_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent) */ static struct parisc_device * alloc_tree_node(struct device *parent, char id) { - struct device *dev; - - list_for_each_entry(dev, &parent->children, node) { - struct parisc_device *padev = to_parisc_device(dev); - if (padev->hw_path == id) - return padev; - } - - return create_tree_node(id, parent); + struct match_id_data d = { + .id = id, + }; + if (device_for_each_child(parent, &d, match_by_id)) + return d.dev; + else + return create_tree_node(id, parent); } static struct parisc_device *create_parisc_device(struct hardware_path *modpath) @@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - char p[64]; - print_pa_hwpath(dev, p); printk("Two devices have hardware path %s. Please file a bug with HP.\n" - "In the meantime, you could try rearranging your cards.\n", p); + "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev)); return NULL; } @@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev->id.hversion_rev = iodc_data[1] & 0x0f; dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) | (iodc_data[5] << 8) | iodc_data[6]; - dev->hpa = hpa; + dev->hpa.name = parisc_pathname(dev); + dev->hpa.start = hpa; + if (hpa == 0xf4000000 || hpa == 0xf6000000 || + hpa == 0xf8000000 || hpa == 0xfa000000) { + dev->hpa.end = hpa + 0x01ffffff; + } else { + dev->hpa.end = hpa + 0xfff; + } + dev->hpa.flags = IORESOURCE_MEM; name = parisc_hardware_description(&dev->id); if (name) { strlcpy(dev->name, name, sizeof(dev->name)); } + /* Silently fail things like mouse ports which are subsumed within + * the keyboard controller + */ + if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) + printk("Unable to claim HPA %lx for device %s\n", + hpa, name); + return dev; } @@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index, return (curr->hw_path == id); } +struct parse_tree_data { + int index; + struct hardware_path * modpath; + struct device * dev; +}; + +static int check_parent(struct device * dev, void * data) +{ + struct parse_tree_data * d = data; + + if (check_dev(dev)) { + if (dev->bus == &parisc_bus_type) { + if (match_parisc_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (is_pci_dev(dev)) { + if (match_pci_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (dev->bus == NULL) { + /* we are on a bus bridge */ + struct device *new = parse_tree_node(dev, d->index, d->modpath); + if (new) + d->dev = new; + } + } + return d->dev != NULL; +} + /** * parse_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index, static struct device * parse_tree_node(struct device *parent, int index, struct hardware_path *modpath) { - struct device *device; - - list_for_each_entry(device, &parent->children, node) { - if (device->bus == &parisc_bus_type) { - if (match_parisc_device(device, index, modpath)) - return device; - } else if (is_pci_dev(device)) { - if (match_pci_device(device, index, modpath)) - return device; - } else if (device->bus == NULL) { - /* we are on a bus bridge */ - struct device *new = parse_tree_node(device, index, modpath); - if (new) - return new; - } - } + struct parse_tree_data d = { + .index = index, + .modpath = modpath, + }; - return NULL; + struct recurse_struct recurse_data = { + .obj = &d, + .fn = check_parent, + }; + + device_for_each_child(parent, &recurse_data, descend_children); + return d.dev; } /** @@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath); ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT)) #define IS_LOWER_PORT(dev) \ - ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \ + ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \ & BC_PORT_MASK) == BC_LOWER_PORT) #define MAX_NATIVE_DEVICES 64 @@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath); #define FLEX_MASK F_EXTEND(0xfffc0000) #define IO_IO_LOW offsetof(struct bc_module, io_io_low) #define IO_IO_HIGH offsetof(struct bc_module, io_io_high) -#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW) -#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH) +#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW) +#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH) static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, struct device *parent); @@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev) { unsigned long io_io_low, io_io_high; - if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) + if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) return; - if(dev->id.hw_type == HPHW_IOA) { + if (dev->id.hw_type == HPHW_IOA) { io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16); io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET; } else { @@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev) print_pa_hwpath(dev, hw_path); printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", - ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type, + ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); if (dev->num_addrs) { @@ -753,13 +847,20 @@ void init_parisc_bus(void) get_device(&root); } + +static int print_one_device(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) + print_parisc_device(pdev); + return 0; +} + /** * print_parisc_devices - Print out a list of devices found in this system */ void print_parisc_devices(void) { - struct parisc_device *dev; - for_each_padev(dev) { - print_parisc_device(dev); - } + for_each_padev(print_one_device, NULL); } diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index be0f07f2fa5..c7e66ee5b08 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -30,14 +30,14 @@ * - save registers to kernel stack and handle in assembly or C */ +#include <asm/psw.h> #include <asm/assembly.h> /* for LDREG/STREG defines */ #include <asm/pgtable.h> -#include <asm/psw.h> #include <asm/signal.h> #include <asm/unistd.h> #include <asm/thread_info.h> -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define CMPIB cmpib,* #define CMPB cmpb,* #define COND(x) *x @@ -67,19 +67,22 @@ /* Switch to virtual mapping, trashing only %r1 */ .macro virt_map - rsm PSW_SM_Q,%r0 - tovirt_r1 %r29 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 + mfsp %sr7, %r1 + or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ + mtsp %r1, %sr3 + tovirt_r1 %r29 + load32 KERNEL_PSW, %r1 + + rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ mtsp %r0, %sr6 mtsp %r0, %sr7 - load32 KERNEL_PSW, %r1 - mtctl %r1, %cr22 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ + mtctl %r1, %ipsw load32 4f, %r1 mtctl %r1, %cr18 /* Set IIAOQ tail */ ldo 4(%r1), %r1 @@ -214,7 +217,7 @@ va = r8 /* virtual address for which the trap occured */ spc = r24 /* space for which the trap occured */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * itlb miss interruption handler (parisc 1.1 - 32 bit) @@ -236,7 +239,7 @@ .macro itlb_20 code mfctl %pcsq, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -246,7 +249,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * naitlb miss interruption handler (parisc 1.1 - 32 bit) * @@ -283,7 +286,7 @@ .macro naitlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -296,7 +299,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dtlb miss interruption handler (parisc 1.1 - 32 bit) */ @@ -318,7 +321,7 @@ .macro dtlb_20 code mfctl %isr, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dtlb_miss_20w #else b dtlb_miss_20 @@ -328,7 +331,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */ .macro nadtlb_11 code @@ -346,7 +349,7 @@ .macro nadtlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b nadtlb_miss_20w #else b nadtlb_miss_20 @@ -356,7 +359,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dirty bit trap interruption handler (parisc 1.1 - 32 bit) */ @@ -378,7 +381,7 @@ .macro dbit_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dbit_trap_20w #else b dbit_trap_20 @@ -391,7 +394,7 @@ /* The following are simple 32 vs 64 bit instruction * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \reg1,32+\start,\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 @@ -399,7 +402,7 @@ .endm .macro DEP reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depd \reg1,32+\start,\length,\reg2 #else depw \reg1,\start,\length,\reg2 @@ -407,7 +410,7 @@ .endm .macro DEPI val,start,length,reg -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi \val,32+\start,\length,\reg #else depwi \val,\start,\length,\reg @@ -418,7 +421,7 @@ * fault. We have to extract this and place it in the va, * zeroing the corresponding bits in the space register */ .macro space_adjust spc,va,tmp -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \spc,63,SPACEID_SHIFT,\tmp depd %r0,63,SPACEID_SHIFT,\spc depd \tmp,31,SPACEID_SHIFT,\va @@ -476,7 +479,7 @@ bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ copy \pmd,%r9 -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r9,PxD_VALUE_SHIFT,\pmd #else shlw %r9,PxD_VALUE_SHIFT,\pmd @@ -607,7 +610,7 @@ .macro do_alias spc,tmp,tmp1,va,pte,prot,fault cmpib,COND(<>),n 0,\spc,\fault ldil L%(TMPALIAS_MAP_START),\tmp -#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000) +#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000) /* on LP64, ldi will sign extend into the upper 32 bits, * which is behaviour we don't want */ depdi 0,31,32,\tmp @@ -621,7 +624,7 @@ * OK, it is in the temp alias region, check whether "from" or "to". * Check "subtle" note in pacache.S re: r23/r26. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u,*= \va,41,1,%r0 #else extrw,u,= \va,9,1,%r0 @@ -688,7 +691,7 @@ fault_vector_20: def 30 def 31 -#ifndef __LP64__ +#ifndef CONFIG_64BIT .export fault_vector_11 @@ -761,7 +764,7 @@ __kernel_thread: copy %r30, %r1 ldo PT_SZ_ALGN(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Yo, function pointers in wide mode are little structs... -PB */ ldd 24(%r26), %r2 STREG %r2, PT_GR27(%r1) /* Store childs %dp */ @@ -777,7 +780,7 @@ __kernel_thread: or %r26, %r24, %r26 /* will have kernel mappings. */ ldi 1, %r25 /* stack_start, signals kernel thread */ stw %r0, -52(%r30) /* user_tid */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_fork, %r2 @@ -806,7 +809,7 @@ ret_from_kernel_thread: LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1 LDREG TASK_PT_GR25(%r1), %r26 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR27(%r1), %r27 LDREG TASK_PT_GR22(%r1), %r22 #endif @@ -814,11 +817,16 @@ ret_from_kernel_thread: ble 0(%sr7, %r1) copy %r31, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ loadgp /* Thread could have been in a module */ #endif +#ifndef CONFIG_64BIT b sys_exit +#else + load32 sys_exit, %r1 + bv %r0(%r1) +#endif ldi 0, %r26 .import sys_execve, code @@ -830,7 +838,7 @@ __execve: STREG %r26, PT_GR26(%r16) STREG %r25, PT_GR25(%r16) STREG %r24, PT_GR24(%r16) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL sys_execve, %r2 @@ -855,6 +863,7 @@ __execve: _switch_to: STREG %r2, -RP_OFFSET(%r30) + callee_save_float callee_save load32 _switch_to_ret, %r2 @@ -871,6 +880,7 @@ _switch_to: _switch_to_ret: mtctl %r0, %cr0 /* Needed for single stepping */ callee_rest + callee_rest_float LDREG -RP_OFFSET(%r30), %r2 bv %r0(%r2) @@ -888,9 +898,6 @@ _switch_to_ret: * this way, then we will need to copy %sr3 in to PT_SR[3..7], and * adjust IASQ[0..1]. * - * Note that the following code uses a "relied upon translation". - * See the parisc ACD for details. The ssm is necessary due to a - * PCXT bug. */ .align 4096 @@ -911,7 +918,7 @@ syscall_exit_rfi: STREG %r19,PT_IAOQ1(%r16) LDREG PT_PSW(%r16),%r19 load32 USER_PSW_MASK,%r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT load32 USER_PSW_HI_MASK,%r20 depd %r20,31,32,%r1 #endif @@ -955,7 +962,7 @@ intr_return: /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount ** irq_stat[] is defined using ____cacheline_aligned. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r1, 6, %r20 #else shlw %r1, 5, %r20 @@ -963,9 +970,6 @@ intr_return: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,intr_do_softirq /* forward */ - intr_check_resched: /* check for reschedule */ @@ -985,24 +989,19 @@ intr_restore: rest_fp %r1 rest_general %r29 - /* Create a "relied upon translation" PA 2.0 Arch. F-5 */ - ssm 0,%r0 - nop - nop - nop - nop - nop - nop - nop + /* inverse of virt_map */ + pcxt_ssm_bug + rsm PSW_SM_QUIET,%r0 /* prepare for rfi */ tophys_r1 %r29 - rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0 /* Restore space id's and special cr's from PT_REGS - * structure pointed to by r29 */ + * structure pointed to by r29 + */ rest_specials %r29 - /* Important: Note that rest_stack restores r29 - * last (we are using it)! It also restores r1 and r30. */ + /* IMPORTANT: rest_stack restores r29 last (we are using it)! + * It also restores r1 and r30. + */ rest_stack rfi @@ -1015,17 +1014,6 @@ intr_restore: nop nop - .import do_softirq,code -intr_do_softirq: - bl do_softirq,%r2 -#ifdef __LP64__ - ldo -16(%r30),%r29 /* Reference param save area */ -#else - nop -#endif - b intr_check_resched - nop - .import schedule,code intr_do_resched: /* Only do reschedule if we are returning to user space */ @@ -1036,12 +1024,17 @@ intr_do_resched: CMPIB= 0,%r20,intr_restore /* backward */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif ldil L%intr_check_sig, %r2 +#ifndef CONFIG_64BIT b schedule +#else + load32 schedule, %r20 + bv %r0(%r20) +#endif ldo R%intr_check_sig(%r2), %r2 @@ -1064,7 +1057,7 @@ intr_do_signal: copy %r0, %r24 /* unsigned long in_syscall */ copy %r16, %r25 /* struct pt_regs *regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1088,7 +1081,7 @@ intr_extint: mfctl %cr31,%r1 copy %r30,%r17 /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi 0,63,15,%r17 #else depi 0,31,15,%r17 @@ -1115,7 +1108,7 @@ intr_extint: ldil L%intr_return, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1153,15 +1146,17 @@ intr_save: CMPIB=,n 6,%r26,skip_save_ior - /* save_specials left ipsw value in r8 for us to test */ mfctl %cr20, %r16 /* isr */ + nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */ mfctl %cr21, %r17 /* ior */ -#ifdef __LP64__ + +#ifdef CONFIG_64BIT /* * If the interrupted code was running with W bit off (32 bit), * clear the b bits (bits 0 & 1) in the ior. + * save_specials left ipsw value in r8 for us to test. */ extrd,u,*<> %r8,PSW_W_BIT,1,%r0 depdi 0,1,2,%r17 @@ -1192,7 +1187,7 @@ skip_save_ior: loadgp copy %r29, %r25 /* arg1 is pt_regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1230,7 +1225,7 @@ skip_save_ior: spc = r24 /* space for which the trap occured */ ptp = r25 /* page directory/page table pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT dtlb_miss_20w: space_adjust spc,va,t0 @@ -1487,10 +1482,10 @@ nadtlb_emulate: add,l %r1,%r24,%r1 /* doesn't affect c/b bits */ nadtlb_nullify: - mfctl %cr22,%r8 /* Get ipsw */ + mfctl %ipsw,%r8 ldil L%PSW_N,%r9 or %r8,%r9,%r8 /* Set PSW_N */ - mtctl %r8,%cr22 + mtctl %r8,%ipsw rfir nop @@ -1521,7 +1516,7 @@ nadtlb_probe_check: nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT itlb_miss_20w: /* @@ -1588,7 +1583,7 @@ itlb_miss_20: #endif -#ifdef __LP64__ +#ifdef CONFIG_64BIT dbit_trap_20w: space_adjust spc,va,t0 @@ -1797,7 +1792,7 @@ sys_fork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1847,7 +1842,7 @@ sys_clone_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1869,7 +1864,7 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1897,10 +1892,10 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif - bl \execve,%r2 + BL \execve,%r2 copy %r1,%arg0 ldo -FRAME_SIZE(%r30),%r30 @@ -1923,7 +1918,7 @@ error_\execve: sys_execve_wrapper: execve_wrapper sys_execve -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_execve_wrapper .import sys32_execve @@ -1937,7 +1932,7 @@ sys_rt_sigreturn_wrapper: ldo TASK_REGS(%r26),%r26 /* get pt regs */ /* Don't save regs, we are going to restore them from sigcontext. */ STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 BL sys_rt_sigreturn,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1968,7 +1963,7 @@ sys_sigaltstack_wrapper: ldo TASK_REGS(%r1),%r24 /* get pt regs */ LDREG TASK_PT_GR30(%r24),%r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l do_sigaltstack,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1982,7 +1977,7 @@ sys_sigaltstack_wrapper: bv %r0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_sigaltstack_wrapper sys32_sigaltstack_wrapper: /* Get the user stack pointer */ @@ -2006,7 +2001,7 @@ sys_rt_sigsuspend_wrapper: reg_save %r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l sys_rt_sigsuspend,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -2079,7 +2074,7 @@ syscall_check_bh: ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */ /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r26, 6, %r20 #else shlw %r26, 5, %r20 @@ -2087,9 +2082,6 @@ syscall_check_bh: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */ - syscall_check_resched: /* check for reschedule */ @@ -2144,7 +2136,7 @@ syscall_restore: depi 3,31,2,%r31 /* ensure return to user mode. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -2227,20 +2219,10 @@ pt_regs_ok: b intr_restore nop - .import do_softirq,code -syscall_do_softirq: - bl do_softirq,%r2 - nop - /* NOTE: We enable I-bit incase we schedule later, - * and we might be going back to userspace if we were - * traced. */ - b syscall_check_resched - ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */ - .import schedule,code syscall_do_resched: BL schedule,%r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #else nop @@ -2260,7 +2242,7 @@ syscall_do_signal: ldi 1, %r24 /* unsigned long in_syscall */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_signal,%r2 diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index f244fb200db..553f8fe0322 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8))); int parisc_narrow_firmware = 1; #endif -/* on all currently-supported platforms, IODC I/O calls are always - * 32-bit calls, and MEM_PDC calls are always the same width as the OS. - * This means Cxxx boxes can't run wide kernels right now. -PB +/* On most currently-supported platforms, IODC I/O calls are 32-bit calls + * and MEM_PDC calls are always the same width as the OS. + * Some PAT boxes may have 64-bit IODC I/O. * - * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on - * systems with 32-bit MEM_PDC calls. This will allow wide kernels to - * run on Cxxx boxes now. -RB - * - * Note that some PAT boxes may have 64-bit IODC I/O... + * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow + * 64-bit kernels to run on systems with 32-bit MEM_PDC calls. + * This allowed wide kernels to run on Cxxx boxes. + * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode + * when running a 64-bit kernel on such boxes (e.g. C200 or C360). */ #ifdef __LP64__ diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 28405edf844..0b47afc2069 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -12,7 +12,7 @@ * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de> */ -#include <linux/autoconf.h> /* for CONFIG_SMP */ +#include <linux/config.h> /* for CONFIG_SMP */ #include <asm/asm-offsets.h> #include <asm/psw.h> @@ -36,10 +36,10 @@ boot_args: .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ .export stext .export _stext,data /* Kernel want it this way! */ _stext: @@ -76,7 +76,7 @@ $bss_loop: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 @@ -99,7 +99,7 @@ $bss_loop: stw %r3,0(%r4) ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 @@ -170,7 +170,7 @@ common_stext: stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ #endif /*CONFIG_SMP*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT tophys_r1 %sp /* Save the rfi target address */ @@ -224,8 +224,6 @@ stext_pdc_ret: mtctl %r0,%cr12 mtctl %r0,%cr13 - /* Prepare to RFI! Man all the cannons! */ - /* Initialize the global data pointer */ loadgp @@ -235,7 +233,7 @@ stext_pdc_ret: * following short sequence of instructions can determine this * (without being illegal on a PA1.1 machine). */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT ldi 32,%r10 mtctl %r10,%cr11 .level 2.0 @@ -248,52 +246,22 @@ stext_pdc_ret: $is_pa20: .level LEVEL /* restore 1.1 || 2.0w */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ load32 PA(fault_vector_20),%r10 $install_iva: mtctl %r10,%cr14 -#ifdef __LP64__ - b aligned_rfi + b aligned_rfi /* Prepare to RFI! Man all the cannons! */ nop - .align 256 + .align 128 aligned_rfi: - ssm 0,0 - nop /* 1 */ - nop /* 2 */ - nop /* 3 */ - nop /* 4 */ - nop /* 5 */ - nop /* 6 */ - nop /* 7 */ - nop /* 8 */ -#endif + pcxt_ssm_bug -#ifdef __LP64__ /* move to psw.h? */ -#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R -#else -#define PSW_BITS PSW_SM_Q -#endif + rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ + /* Don't need NOPs, have 8 compliant insn before rfi */ -$rfi: - /* turn off troublesome PSW bits */ - rsm PSW_BITS,%r0 - - /* kernel PSW: - * - no interruptions except HPMC and TOC (which are handled by PDC) - * - Q bit set (IODC / PDC interruptions) - * - big-endian - * - virtually mapped - */ - load32 KERNEL_PSW,%r10 - mtctl %r10,%ipsw - - /* Set the space pointers for the post-RFI world - ** Clear the two-level IIA Space Queue, effectively setting - ** Kernel space. - */ mtctl %r0,%cr17 /* Clear IIASQ tail */ mtctl %r0,%cr17 /* Clear IIASQ head */ @@ -301,8 +269,11 @@ $rfi: mtctl %r11,%cr18 /* IIAOQ head */ ldo 4(%r11),%r11 mtctl %r11,%cr18 /* IIAOQ tail */ + + load32 KERNEL_PSW,%r10 + mtctl %r10,%ipsw - /* Jump to hyperspace */ + /* Jump through hyperspace to Virt Mode */ rfi nop @@ -313,7 +284,7 @@ $rfi: .import smp_init_current_idle_task,data .import smp_callin,code -#ifndef __LP64__ +#ifndef CONFIG_64BIT smp_callin_rtn: .proc .callinfo @@ -321,7 +292,7 @@ smp_callin_rtn: nop nop .procend -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ /*************************************************************************** * smp_slave_stext is executed by all non-monarch Processors when the Monarch @@ -356,7 +327,7 @@ smp_slave_stext: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Setup PDCE_PROC entry */ copy %arg0,%r3 #else @@ -373,7 +344,7 @@ smp_slave_stext: .procend #endif /* CONFIG_SMP */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .data .align 4 @@ -383,4 +354,4 @@ smp_slave_stext: .size $global$,4 $global$: .word 0 -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c index 1d3824b670d..8cad8f004f0 100644 --- a/arch/parisc/kernel/ioctl32.c +++ b/arch/parisc/kernel/ioctl32.c @@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (kversion.name) - kfree(kversion.name); - if (kversion.date) - kfree(kversion.date); - if (kversion.desc) - kfree(kversion.desc); + kfree(kversion.name); + kfree(kversion.date); + kfree(kversion.desc); return ret; } @@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a ret = -EFAULT; } - if (karg.unique != NULL) - kfree(karg.unique); - + kfree(karg.unique); return ret; } @@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) } kfree(karg.list); - return ret; } @@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) out: kfree(karg.list); - return ret; } @@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (karg.send_indices) - kfree(karg.send_indices); - if (karg.send_sizes) - kfree(karg.send_sizes); - if (karg.request_indices) - kfree(karg.request_indices); - if (karg.request_sizes) - kfree(karg.request_sizes); - + kfree(karg.send_indices); + kfree(karg.send_sizes); + kfree(karg.request_indices); + kfree(karg.request_sizes); return ret; } @@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) ret = -EFAULT; } - if (karg.contexts) - kfree(karg.contexts); - + kfree(karg.contexts); return ret; } diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 77e03bc0f93..9534ee17b9b 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -26,7 +26,7 @@ * can be used. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define ADDIB addib,* #define CMPB cmpb,* #define ANDCM andcm,* @@ -40,8 +40,10 @@ .level 2.0 #endif -#include <asm/assembly.h> +#include <linux/config.h> + #include <asm/psw.h> +#include <asm/assembly.h> #include <asm/pgtable.h> #include <asm/cache.h> @@ -62,32 +64,23 @@ flush_tlb_all_local: * to happen in real mode with all interruptions disabled. */ - /* - * Once again, we do the rfi dance ... some day we need examine - * all of our uses of this type of code and see what can be - * consolidated. - */ - - rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */ + /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */ + rsm PSW_SM_I, %r19 /* save I-bit state */ + load32 PA(1f), %r1 nop nop nop nop nop - nop - nop - - rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -178,29 +171,36 @@ fdtonemiddle: /* Loop if LOOP = 1 */ ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */ add %r21, %r20, %r20 /* increment space */ -fdtdone: - /* Switch back to virtual mode */ +fdtdone: + /* + * Switch back to virtual mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - or %r1, %r19, %r1 /* Set I bit if set on entry */ - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + or %r1, %r19, %r1 /* I-bit to state on entry */ + mtctl %r1, %ipsw /* restore I-bit (entire PSW) */ rfi nop 2: bv %r0(%r2) nop - .exit + .exit .procend .export flush_instruction_cache_local,code @@ -227,7 +227,7 @@ flush_instruction_cache_local: fimanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */ - fice 0(%sr1, %arg0) + fice %r0(%sr1, %arg0) fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */ movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */ @@ -238,7 +238,7 @@ fioneloop: /* Loop if LOOP = 1 */ fisync: sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -269,7 +269,7 @@ flush_data_cache_local: fdmanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */ - fdce 0(%sr1, %arg0) + fdce %r0(%sr1, %arg0) fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */ movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */ @@ -281,7 +281,7 @@ fdoneloop: /* Loop if LOOP = 1 */ fdsync: syncdma sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -296,7 +296,7 @@ copy_user_page_asm: .callinfo NO_CALLS .entry -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* PA8x00 CPUs can consume 2 loads or 1 store per cycle. * Unroll the loop by hand and arrange insn appropriately. * GCC probably can do this just as well. @@ -351,7 +351,11 @@ copy_user_page_asm: std %r22, 120(%r26) ldo 128(%r26), %r26 - ADDIB> -1, %r1, 1b /* bundle 10 */ + /* conditional branches nullify on forward taken branch, and on + * non-taken backward branch. Note that .+4 is a backwards branch. + * The ldd should only get executed if the branch is taken. + */ + ADDIB>,n -1, %r1, 1b /* bundle 10 */ ldd 0(%r25), %r19 /* start next loads */ #else @@ -363,10 +367,10 @@ copy_user_page_asm: * the full 64 bit register values on interrupt, we can't * use ldd/std on a 32 bit kernel. */ + ldw 0(%r25), %r19 ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ 1: - ldw 0(%r25), %r19 ldw 4(%r25), %r20 ldw 8(%r25), %r21 ldw 12(%r25), %r22 @@ -396,11 +400,12 @@ copy_user_page_asm: ldw 60(%r25), %r22 stw %r19, 48(%r26) stw %r20, 52(%r26) + ldo 64(%r25), %r25 stw %r21, 56(%r26) stw %r22, 60(%r26) ldo 64(%r26), %r26 - ADDIB> -1, %r1, 1b - ldo 64(%r25), %r25 + ADDIB>,n -1, %r1, 1b + ldw 0(%r25), %r19 #endif bv %r0(%r2) nop @@ -456,7 +461,7 @@ copy_user_page_asm: sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ @@ -543,7 +548,7 @@ __clear_user_page_asm: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ #endif @@ -560,7 +565,7 @@ __clear_user_page_asm: pdtlb 0(%r28) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ /* PREFETCH (Write) has not (yet) been proven to help here */ @@ -585,7 +590,7 @@ __clear_user_page_asm: ADDIB> -1, %r1, 1b ldo 128(%r28), %r28 -#else /* ! __LP64 */ +#else /* ! CONFIG_64BIT */ ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ @@ -608,7 +613,7 @@ __clear_user_page_asm: stw %r0, 60(%r28) ADDIB> -1, %r1, 1b ldo 64(%r28), %r28 -#endif /* __LP64 */ +#endif /* CONFIG_64BIT */ bv %r0(%r2) nop @@ -626,7 +631,7 @@ flush_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -670,7 +675,7 @@ flush_user_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1,63-PAGE_SHIFT,1, %r25 #else depwi,z 1,31-PAGE_SHIFT,1, %r25 @@ -714,7 +719,7 @@ flush_user_icache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -759,7 +764,7 @@ purge_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -807,7 +812,7 @@ flush_alias_page: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ depdi 0, 63,12, %r28 /* Clear any offset bits */ @@ -824,7 +829,7 @@ flush_alias_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r29 #else depwi,z 1, 31-PAGE_SHIFT,1, %r29 @@ -935,7 +940,7 @@ flush_kernel_icache_page: ldil L%icache_stride, %r1 ldw R%icache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -944,23 +949,23 @@ flush_kernel_icache_page: sub %r25, %r23, %r25 -1: fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) +1: fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) CMPB<< %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) @@ -982,17 +987,18 @@ flush_kernel_icache_range_asm: ANDCM %r26, %r21, %r26 1: CMPB<<,n %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) nop .exit - .procend - .align 128 - + /* align should cover use of rfi in disable_sr_hashing_asm and + * srdis_done. + */ + .align 256 .export disable_sr_hashing_asm,code disable_sr_hashing_asm: @@ -1000,28 +1006,26 @@ disable_sr_hashing_asm: .callinfo NO_CALLS .entry - /* Switch to real mode */ - - ssm 0, %r0 /* relied upon translation! */ - nop - nop + /* + * Switch to real mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 PA(1f), %r1 nop nop nop nop nop - - rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -1053,27 +1057,31 @@ srdis_pcxl: srdis_pa20: - /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */ + /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */ .word 0x144008bc /* mfdiag %dr2, %r28 */ depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */ .word 0x145c1840 /* mtdiag %r28, %dr2 */ -srdis_done: +srdis_done: /* Switch back to virtual mode */ + rsm PSW_SM_I, %r0 /* prep to load iia queue */ + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + mtctl %r1, %ipsw rfi nop diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 844c2877a2e..ae6213d7167 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -31,7 +31,7 @@ #include <asm/page.h> /* get_order */ #include <asm/pgalloc.h> #include <asm/uaccess.h> - +#include <asm/tlbflush.h> /* for purge_tlb_*() macros */ static struct proc_dir_entry * proc_gsc_root = NULL; static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length); @@ -333,18 +333,28 @@ pcxl_free_range(unsigned long vaddr, size_t size) static int __init pcxl_dma_init(void) { - if (pcxl_dma_start == 0) - return 0; + if (pcxl_dma_start == 0) + return 0; - spin_lock_init(&pcxl_res_lock); - pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); - pcxl_res_hint = 0; - pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, + spin_lock_init(&pcxl_res_lock); + pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); + pcxl_res_hint = 0; + pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, get_order(pcxl_res_size)); - memset(pcxl_res_map, 0, pcxl_res_size); - proc_gsc_root = proc_mkdir("gsc", 0); - create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info); - return 0; + memset(pcxl_res_map, 0, pcxl_res_size); + proc_gsc_root = proc_mkdir("gsc", 0); + if (!proc_gsc_root) + printk(KERN_WARNING + "pcxl_dma_init: Unable to create gsc /proc dir entry\n"); + else { + struct proc_dir_entry* ent; + ent = create_proc_info_entry("pcxl_dma", 0, + proc_gsc_root, pcxl_proc_info); + if (!ent) + printk(KERN_WARNING + "pci-dma.c: Unable to create pcxl_dma /proc entry.\n"); + } + return 0; } __initcall(pcxl_dma_init); @@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = { static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) { +#if 0 u_long i = 0; unsigned long *res_ptr = (u_long *)pcxl_res_map; - unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ +#endif + unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ - sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n", - PCXL_DMA_MAP_SIZE, - (pcxl_res_size << 3) ); /* 1 bit per page */ + sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n", + PCXL_DMA_MAP_SIZE, total_pages); - sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", - buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */ + sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size); strcat(buf, " total: free: used: % used:\n"); sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size, @@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages, total_pages - pcxl_used_pages, pcxl_used_pages, (pcxl_used_pages * 100 / total_pages)); - + +#if 0 strcat(buf, "\nResource bitmap:"); for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) { @@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) strcat(buf,"\n "); sprintf(buf, "%s %08lx", buf, *res_ptr); } +#endif strcat(buf, "\n"); return strlen(buf); } diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index e6a891a0cad..88cba49c530 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -202,7 +202,8 @@ static void pcibios_link_hba_resources( struct resource *hba_res, struct resource *r) { if (!r->parent) { - printk(KERN_EMERG "PCI: Tell willy he's wrong\n"); + printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n", + r->start, r->end); r->parent = hba_res; /* reverse link is harder *sigh* */ diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 01f676d1673..215d78c87bc 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -41,7 +41,7 @@ /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */ -#undef EARLY_BOOTUP_DEBUG +#define EARLY_BOOTUP_DEBUG #include <linux/config.h> @@ -49,14 +49,8 @@ #include <linux/console.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/interrupt.h> #include <linux/major.h> #include <linux/tty.h> -#include <asm/page.h> -#include <asm/types.h> -#include <asm/system.h> #include <asm/pdc.h> /* for iodc_call() proto and friends */ @@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options) } #if defined(CONFIG_PDC_CONSOLE) -#define PDC_CONSOLE_DEVICE pdc_console_device static struct tty_driver * pdc_console_device (struct console *c, int *index) { extern struct tty_driver console_driver; @@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index) return &console_driver; } #else -#define PDC_CONSOLE_DEVICE NULL +#define pdc_console_device NULL #endif static struct console pdc_cons = { .name = "ttyB", .write = pdc_console_write, - .device = PDC_CONSOLE_DEVICE, + .device = pdc_console_device, .setup = pdc_console_setup, - .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED, + .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED, .index = -1, }; static int pdc_console_initialized; -extern unsigned long con_start; /* kernel/printk.c */ -extern unsigned long log_end; /* kernel/printk.c */ - static void pdc_console_init_force(void) { @@ -146,27 +136,11 @@ void __init pdc_console_init(void) } -/* Unregister the pdc console with the printk console layer */ -void pdc_console_die(void) -{ - if (!pdc_console_initialized) - return; - --pdc_console_initialized; - - printk(KERN_INFO "Switching from PDC console\n"); - - /* Don't repeat what we've already printed */ - con_start = log_end; - - unregister_console(&pdc_cons); -} - - /* * Used for emergencies. Currently only used if an HPMC occurs. If an * HPMC occurs, it is possible that the current console may not be - * properly initialed after the PDC IO reset. This routine unregisters all - * of the current consoles, reinitializes the pdc console and + * properly initialised after the PDC IO reset. This routine unregisters + * all of the current consoles, reinitializes the pdc console and * registers it. */ @@ -177,13 +151,13 @@ void pdc_console_restart(void) if (pdc_console_initialized) return; + /* If we've already seen the output, don't bother to print it again */ + if (console_drivers != NULL) + pdc_cons.flags &= ~CON_PRINTBUFFER; + while ((console = console_drivers) != NULL) unregister_console(console_drivers); - /* Don't repeat what we've already printed */ - con_start = log_end; - /* force registering the pdc console */ pdc_console_init_force(); } - diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index b3ad0a505b8..44670d6e06f 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr) uint64_t *bptr; uint32_t dwords; uint32_t *intrigue_rdr; - uint64_t *intrigue_bitmask, tmp64, proc_hpa; + uint64_t *intrigue_bitmask, tmp64; + void __iomem *runway; struct rdr_tbl_ent *tentry; int i; @@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr) return -1; } - proc_hpa = cpu_device->hpa; + runway = ioremap(cpu_device->hpa.start, 4096); /* Merge intrigue bits into Runway STATUS 0 */ - tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; - __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), + runway + RUNWAY_STATUS); /* Write RUNWAY DEBUG registers */ for (i = 0; i < 8; i++) { - __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG); } return 0; diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 46b75938511..7fdca87ef64 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -9,7 +9,7 @@ * Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org> * Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org> * Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com> - * Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org> + * Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org> * Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org> * Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org> * Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org> @@ -245,7 +245,17 @@ int sys_clone(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs) { - int __user *user_tid = (int __user *)regs->gr[26]; + /* Arugments from userspace are: + r26 = Clone flags. + r25 = Child stack. + r24 = parent_tidptr. + r23 = Is the TLS storage descriptor + r22 = child_tidptr + + However, these last 3 args are only examined + if the proper flags are set. */ + int __user *child_tidptr; + int __user *parent_tidptr; /* usp must be word aligned. This also prevents users from * passing in the value 1 (which is the signal for a special @@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp, usp = ALIGN(usp, 4); /* A zero value for usp means use the current stack */ - if(usp == 0) - usp = regs->gr[30]; + if (usp == 0) + usp = regs->gr[30]; - return do_fork(clone_flags, usp, regs, 0, user_tid, NULL); + if (clone_flags & CLONE_PARENT_SETTID) + parent_tidptr = (int __user *)regs->gr[24]; + else + parent_tidptr = NULL; + + if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) + child_tidptr = (int __user *)regs->gr[22]; + else + child_tidptr = NULL; + + return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr); } int @@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } else { cregs->kpc = (unsigned long) &child_return; } + /* Setup thread TLS area from the 4th parameter in clone */ + if (clone_flags & CLONE_SETTLS) + cregs->cr27 = pregs->gr[23]; + } return 0; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 13b721cb9f5..4f5bbcf1f5a 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev) * May get overwritten by PAT code. */ cpuid = boot_cpu_data.cpu_count; - txn_addr = dev->hpa; /* for legacy PDC */ + txn_addr = dev->hpa.start; /* for legacy PDC */ #ifdef __LP64__ if (is_pdc_pat()) { @@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev) * boot time (ie shutdown a CPU from an OS perspective). */ /* get the cpu number */ - status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start); BUG_ON(PDC_OK != status); @@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev) printk(KERN_WARNING "IGNORING CPU at 0x%x," " cpu_slot_id > NR_CPUS" " (%ld > %d)\n", - dev->hpa, cpu_info.cpu_num, NR_CPUS); + dev->hpa.start, cpu_info.cpu_num, NR_CPUS); /* Ignore CPU since it will only crash */ boot_cpu_data.cpu_count--; return 1; @@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev) p->loops_per_jiffy = loops_per_jiffy; p->dev = dev; /* Save IODC data in case we need it */ - p->hpa = dev->hpa; /* save CPU hpa */ + p->hpa = dev->hpa.start; /* save CPU hpa */ p->cpuid = cpuid; /* save CPU id */ p->txn_addr = txn_addr; /* save CPU IRQ address */ #ifdef CONFIG_SMP diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 8dd5defb731..8c2859cca77 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -7,8 +7,10 @@ * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com) * */ -#include <asm/assembly.h> +#include <linux/config.h> + #include <asm/psw.h> +#include <asm/assembly.h> .section .bss .export real_stack @@ -20,7 +22,7 @@ real32_stack: real64_stack: .block 8192 -#ifdef __LP64__ +#ifdef CONFIG_64BIT # define REG_SZ 8 #else # define REG_SZ 4 @@ -50,7 +52,7 @@ save_cr_end: real32_call_asm: STREG %rp, -RP_OFFSET(%sp) /* save RP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT callee_save ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */ STREG %r27, -1*REG_SZ(%sp) @@ -77,7 +79,7 @@ real32_call_asm: b,l save_control_regs,%r2 /* modifies r1, r2, r28 */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT rsm PSW_SM_W, %r0 /* go narrow */ #endif @@ -85,7 +87,7 @@ real32_call_asm: bv 0(%r31) nop ric_ret: -#ifdef __LP64__ +#ifdef CONFIG_64BIT ssm PSW_SM_W, %r0 /* go wide */ #endif /* restore CRs before going virtual in case we page fault */ @@ -97,7 +99,7 @@ ric_ret: tovirt_r1 %sp LDREG -REG_SZ(%sp), %sp /* restore SP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG -1*REG_SZ(%sp), %r27 LDREG -2*REG_SZ(%sp), %r29 ldo -2*REG_SZ(%sp), %sp @@ -143,24 +145,21 @@ restore_control_regs: /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ - .align 128 .text + .align 128 rfi_virt2real: /* switch to real mode... */ - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 PA(rfi_v2r_1), %r1 nop nop nop nop nop - rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */ + rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 PA(rfi_v2r_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -184,10 +183,8 @@ rfi_v2r_1: .text .align 128 rfi_real2virt: - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 (rfi_r2v_1), %r1 nop nop nop @@ -197,7 +194,6 @@ rfi_real2virt: rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 (rfi_r2v_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -218,7 +214,7 @@ rfi_r2v_1: bv 0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT /************************ 64-bit real-mode calls ***********************/ /* This is only usable in wide kernels right now and will probably stay so */ @@ -296,7 +292,7 @@ pc_in_user_space: ** comparing function pointers. */ __canonicalize_funcptr_for_compare: -#ifdef __LP64__ +#ifdef CONFIG_64BIT bve (%r2) #else bv %r0(%r2) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 0224651fd8f..82c24e62ab6 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, give_sigsegv: DBG(1,"setup_rt_frame: sending SIGSEGV\n"); - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = current->pid; - si.si_uid = current->uid; - si.si_addr = frame; - force_sig_info(SIGSEGV, &si, current); + force_sigsegv(sig, current); return 0; } @@ -633,10 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) put_user(0xe0008200, &usp[3]); put_user(0x34140000, &usp[4]); - /* Stack is 64-byte aligned, and we only - * need to flush 1 cache line */ - asm("fdc 0(%%sr3, %0)\n" - "fic 0(%%sr3, %0)\n" + /* Stack is 64-byte aligned, and we only need + * to flush 1 cache line. + * Flushing one cacheline is cheap. + * "sync" on bigger (> 4 way) boxes is not. + */ + asm("fdc %%r0(%%sr3, %0)\n" + "sync\n" + "fic %%r0(%%sr3, %0)\n" "sync\n" : : "r"(regs->gr[30])); diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index bcc7e83f514..5db3be4e270 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -18,7 +18,7 @@ */ #undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */ -#include <linux/autoconf.h> +#include <linux/config.h> #include <linux/types.h> #include <linux/spinlock.h> diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 8c7a7185cd3..b29b76b42bb 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -6,6 +6,7 @@ * thanks to Philipp Rumpf, Mike Shaver and various others * sorry about the wall, puffin.. */ +#include <linux/config.h> /* for CONFIG_SMP */ #include <asm/asm-offsets.h> #include <asm/unistd.h> @@ -22,15 +23,13 @@ */ #define KILL_INSN break 0,0 -#include <linux/config.h> /* for CONFIG_SMP */ - -#ifdef __LP64__ +#ifdef CONFIG_64BIT .level 2.0w #else .level 1.1 #endif -#ifndef __LP64__ +#ifndef CONFIG_64BIT .macro fixup_branch,lbl b \lbl .endm @@ -103,7 +102,7 @@ linux_gateway_entry: mfsp %sr7,%r1 /* save user sr7 */ mtsp %r1,%sr3 /* and store it in sr3 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* for now we can *always* set the W bit on entry to the syscall * since we don't support wide userland processes. We could * also save the current SM other than in r0 and restore it on @@ -155,7 +154,7 @@ linux_gateway_entry: STREG %r19, TASK_PT_GR19(%r1) LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */ #if 0 xor %r19,%r2,%r2 /* clear bottom bit */ @@ -186,7 +185,7 @@ linux_gateway_entry: loadgp -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ copy %r19,%r2 /* W bit back to r2 */ #else @@ -205,7 +204,7 @@ linux_gateway_entry: /* Note! We cannot use the syscall table that is mapped nearby since the gateway page is mapped execute-only. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldil L%sys_call_table, %r1 or,= %r2,%r2,%r2 addil L%(sys_call_table64-sys_call_table), %r1 @@ -321,7 +320,7 @@ tracesys_next: LDREG TASK_PT_GR25(%r1), %r25 LDREG TASK_PT_GR24(%r1), %r24 LDREG TASK_PT_GR23(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR22(%r1), %r22 LDREG TASK_PT_GR21(%r1), %r21 ldo -16(%r30),%r29 /* Reference param save area */ @@ -350,7 +349,7 @@ tracesys_next: tracesys_exit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG TI_TASK(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -371,7 +370,7 @@ tracesys_exit: tracesys_sigexit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG 0(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -404,7 +403,7 @@ lws_start: gate .+8, %r0 depi 3, 31, 2, %r31 /* Ensure we return to userspace */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: If we are a 64-bit kernel just * turn this on unconditionally. */ @@ -440,7 +439,7 @@ lws_exit_nosys: /* Fall through: Return to userspace */ lws_exit: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -486,7 +485,7 @@ lws_exit: /* ELF64 Process entry path */ lws_compare_and_swap64: -#ifdef __LP64__ +#ifdef CONFIG_64BIT b,n lws_compare_and_swap #else /* If we are not a 64-bit kernel, then we don't @@ -497,7 +496,7 @@ lws_compare_and_swap64: /* ELF32 Process entry path */ lws_compare_and_swap32: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Clip all the input registers */ depdi 0, 31, 32, %r26 depdi 0, 31, 32, %r25 @@ -608,7 +607,7 @@ cas_action: the other for the store. Either return -EFAULT. Each of the entries must be relocated. */ .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(2b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -619,7 +618,7 @@ cas_action: .previous .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(1b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -638,7 +637,7 @@ end_linux_gateway_page: /* Relocate symbols assuming linux_gateway_page is mapped to virtual address 0x0 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: The code will always be on the gateay page and thus it will be on the first 4k, the assembler seems to think that the final @@ -666,7 +665,7 @@ lws_table: sys_call_table: #include "syscall_table.S" -#ifdef __LP64__ +#ifdef CONFIG_64BIT .align 4096 .export sys_call_table64 .Lsys_call_table64: diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index dcfa4d3d0e7..32cbc048932 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -35,7 +35,7 @@ #undef ENTRY_UHOH #undef ENTRY_COMP #undef ENTRY_OURS -#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT) +#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT) /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific * implementation is required on wide palinux. Use ENTRY_COMP where @@ -46,7 +46,7 @@ #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented #define ENTRY_OURS(_name_) .dword parisc_##_name_ #define ENTRY_COMP(_name_) .dword compat_sys_##_name_ -#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT) +#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT) #define ENTRY_SAME(_name_) .dword sys_##_name_ #define ENTRY_DIFF(_name_) .dword sys_##_name_ #define ENTRY_UHOH(_name_) .dword sys_##_name_ @@ -368,5 +368,11 @@ ENTRY_COMP(mbind) /* 260 */ ENTRY_COMP(get_mempolicy) ENTRY_COMP(set_mempolicy) + ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */ + ENTRY_SAME(add_key) + ENTRY_SAME(request_key) /* 265 */ + ENTRY_SAME(keyctl) + ENTRY_SAME(ioprio_set) + ENTRY_SAME(ioprio_get) /* Nothing yet */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 7ff67f8e9f8..bc979e1abde 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -89,14 +89,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } -#ifdef CONFIG_CHASSIS_LCD_LED - /* Only schedule the led tasklet on cpu 0, and only if it - * is enabled. - */ - if (cpu == 0 && !atomic_read(&led_tasklet.count)) - tasklet_schedule(&led_tasklet); -#endif - /* check soft power switch status */ if (cpu == 0 && !atomic_read(&power_tasklet.count)) tasklet_schedule(&power_tasklet); @@ -104,6 +96,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (regs->gr[0] & PSW_N) + pc -= 4; + +#ifdef CONFIG_SMP + if (in_lock_functions(pc)) + pc = regs->gr[2]; +#endif + + return pc; +} +EXPORT_SYMBOL(profile_pc); + + /*** converted from ia64 ***/ /* * Return the number of micro-seconds that elapsed since the last diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index d2e5b229a2f..15914f0235a 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs) char *level; unsigned long cr30; unsigned long cr31; - + /* carlos says that gcc understands better memory in a struct, + * and it makes our life easier with fpregs -- T-Bone */ + struct { u32 sw[2]; } s; + level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; printk("%s\n", level); /* don't want to have that pretty register dump messed up */ @@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs) printk("%s\n", buf); } -#if RIDICULOUSLY_VERBOSE - for (i = 0; i < 32; i += 2) - printk("%sFR%02d : %016lx FR%2d : %016lx", level, i, - regs->fr[i], i+1, regs->fr[i+1]); -#endif + /* FR are 64bit everywhere. Need to use asm to get the content + * of fpsr/fper1, and we assume that we won't have a FP Identify + * in our way, otherwise we're screwed. + * The fldd is used to restore the T-bit if there was one, as the + * store clears it anyway. + * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ + __asm__ ( + "fstd %%fr0,0(%1) \n\t" + "fldd 0(%1),%%fr0 \n\t" + : "=m" (s) : "r" (&s) : "%r0" + ); + + printk("%s\n", level); + printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level); + printbinary(buf, s.sw[0], 32); + printk("%sFPSR: %s\n", level, buf); + printk("%sFPER1: %08x\n", level, s.sw[1]); + + /* here we'll print fr0 again, tho it'll be meaningless */ + for (i = 0; i < 32; i += 4) { + int j; + p = buf; + p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3); + for (j = 0; j < 4; j++) + p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]); + printk("%s\n", buf); + } cr30 = mfctl(30); cr31 = mfctl(31); diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 62eea35bcd6..eaae8a021f9 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs) register int flop=0; /* true if this is a flop */ /* log a message with pacing */ - if (user_mode(regs)) - { - if (unaligned_count > 5 && jiffies - last_time > 5*HZ) - { + if (user_mode(regs)) { + if (current->thread.flags & PARISC_UAC_SIGBUS) { + goto force_sigbus; + } + + if (unaligned_count > 5 && jiffies - last_time > 5*HZ) { unaligned_count = 0; last_time = jiffies; } - if (++unaligned_count < 5) - { + + if (!(current->thread.flags & PARISC_UAC_NOPRINT) + && ++unaligned_count < 5) { char buf[256]; sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n", current->comm, current->pid, regs->ior, regs->iaoq[0]); @@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs) show_regs(regs); #endif } + if (!unaligned_enabled) goto force_sigbus; } diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 1b91612ed96..e0661c2978e 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -35,7 +35,7 @@ extrd,u \t2,63,32,\t2 #endif /* t2 = &__per_cpu_offset[smp_processor_id()]; */ - LDREG,s \t2(\t1),\t2 + LDREGX \t2(\t1),\t2 addil LT%per_cpu__exception_data,%r27 LDREG RT%per_cpu__exception_data(%r1),\t1 /* t1 = &__get_cpu_var(exception_data) */ @@ -53,6 +53,8 @@ .endm #endif + .level LEVEL + .text .section .fixup, "ax" diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index feb1b9f42c2..b7098035321 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) pds = (double *)pcs; pdd = (double *)pcd; +#if 0 /* Copy 8 doubles at a time */ while (len >= 8*sizeof(double)) { register double r1, r2, r3, r4, r5, r6, r7, r8; @@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) fstdma(d_space, r8, pdd, pmc_store_exc); len -= 8*sizeof(double); } +#endif pws = (unsigned int *)pds; pwd = (unsigned int *)pdd; diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index ef78bffed5e..0a90962c38e 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -204,7 +204,7 @@ static irqreturn_t hil_kbd_interrupt(struct serio *serio, hil_packet packet; int idx; - kbd = (struct hil_kbd *)serio->private; + kbd = serio_get_drvdata(serio); if (kbd == NULL) { BUG(); return IRQ_HANDLED; @@ -234,7 +234,7 @@ static void hil_kbd_disconnect(struct serio *serio) { struct hil_kbd *kbd; - kbd = (struct hil_kbd *)serio->private; + kbd = serio_get_drvdata(serio); if (kbd == NULL) { BUG(); return; @@ -245,20 +245,20 @@ static void hil_kbd_disconnect(struct serio *serio) kfree(kbd); } -static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv) +static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) { struct hil_kbd *kbd; uint8_t did, *idd; int i; - if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return; - - if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return; + kbd = kmalloc(sizeof(*kbd), GFP_KERNEL); + if (!kbd) + return -ENOMEM; memset(kbd, 0, sizeof(struct hil_kbd)); if (serio_open(serio, drv)) goto bail0; - serio->private = kbd; + serio_set_drvdata(serio, kbd); kbd->serio = serio; kbd->dev.private = kbd; @@ -342,19 +342,31 @@ static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv) down(&(kbd->sem)); up(&(kbd->sem)); - return; + return 0; bail1: serio_close(serio); bail0: kfree(kbd); + serio_set_drvdata(serio, NULL); + return -EIO; } +static struct serio_device_id hil_kbd_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; struct serio_driver hil_kbd_serio_drv = { .driver = { .name = "hil_kbd", }, .description = "HP HIL keyboard driver", + .id_table = hil_kbd_ids, .connect = hil_kbd_connect, .disconnect = hil_kbd_disconnect, .interrupt = hil_kbd_interrupt diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index eecb77db084..e95bc052e32 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -22,7 +22,7 @@ #include <linux/errno.h> #include <linux/input.h> #include <linux/init.h> -#include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/hil.h> #include <linux/spinlock.h> @@ -278,11 +278,11 @@ static int __init hil_init_chip(struct parisc_device *dev) { if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); return -ENODEV; } - hil_base = dev->hpa; + hil_base = dev->hpa.start; hil_irq = dev->irq; hil_dev.dev_id = dev; @@ -299,7 +299,7 @@ static struct parisc_device_id hil_tbl[] = { MODULE_DEVICE_TABLE(parisc, hil_tbl); static struct parisc_driver hil_driver = { - .name = "HIL", + .name = "hil", .id_table = hil_tbl, .probe = hil_init_chip, }; diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c index bc22849c6c7..c2bf2ed07dc 100644 --- a/drivers/input/mouse/hil_ptr.c +++ b/drivers/input/mouse/hil_ptr.c @@ -196,7 +196,7 @@ static irqreturn_t hil_ptr_interrupt(struct serio *serio, hil_packet packet; int idx; - ptr = (struct hil_ptr *)serio->private; + ptr = serio_get_drvdata(serio); if (ptr == NULL) { BUG(); return IRQ_HANDLED; @@ -227,7 +227,7 @@ static void hil_ptr_disconnect(struct serio *serio) { struct hil_ptr *ptr; - ptr = (struct hil_ptr *)serio->private; + ptr = serio_get_drvdata(serio); if (ptr == NULL) { BUG(); return; @@ -238,21 +238,19 @@ static void hil_ptr_disconnect(struct serio *serio) kfree(ptr); } -static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver) +static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) { struct hil_ptr *ptr; char *txt; unsigned int i, naxsets, btntype; uint8_t did, *idd; - if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return; - - if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return; + if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM; memset(ptr, 0, sizeof(struct hil_ptr)); if (serio_open(serio, driver)) goto bail0; - serio->private = ptr; + serio_set_drvdata(serio, ptr); ptr->serio = serio; ptr->dev.private = ptr; @@ -380,23 +378,34 @@ static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver) (btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad", did); - return; + return 0; bail1: serio_close(serio); bail0: kfree(ptr); - return; + serio_set_drvdata(serio, NULL); + return -ENODEV; } +static struct serio_device_id hil_ptr_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; static struct serio_driver hil_ptr_serio_driver = { .driver = { .name = "hil_ptr", }, .description = "HP HIL mouse/tablet driver", - .connect = hil_ptr_connect, - .disconnect = hil_ptr_disconnect, - .interrupt = hil_ptr_interrupt + .id_table = hil_ptr_ids, + .connect = hil_ptr_connect, + .disconnect = hil_ptr_disconnect, + .interrupt = hil_ptr_interrupt }; static int __init hil_ptr_init(void) diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 897e4c12b64..a7b0de0f92b 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -211,9 +211,6 @@ static void gscps2_reset(struct gscps2port *ps2port) writeb(0xff, addr+GSC_RESET); gscps2_flush(ps2port); spin_unlock_irqrestore(&ps2port->lock, flags); - - /* enable it */ - gscps2_enable(ps2port, ENABLE); } static LIST_HEAD(ps2port_list); @@ -307,6 +304,9 @@ static int gscps2_open(struct serio *port) gscps2_reset(ps2port); + /* enable it */ + gscps2_enable(ps2port, ENABLE); + gscps2_interrupt(0, NULL, NULL); return 0; @@ -331,7 +331,7 @@ static int __init gscps2_probe(struct parisc_device *dev) { struct gscps2port *ps2port; struct serio *serio; - unsigned long hpa = dev->hpa; + unsigned long hpa = dev->hpa.start; int ret; if (!dev->irq) @@ -370,8 +370,6 @@ static int __init gscps2_probe(struct parisc_device *dev) serio->port_data = ps2port; serio->dev.parent = &dev->dev; - list_add_tail(&ps2port->node, &ps2port_list); - ret = -EBUSY; if (request_irq(dev->irq, gscps2_interrupt, SA_SHIRQ, ps2port->port->name, ps2port)) goto fail_miserably; @@ -396,15 +394,16 @@ static int __init gscps2_probe(struct parisc_device *dev) serio_register_port(ps2port->port); + list_add_tail(&ps2port->node, &ps2port_list); + return 0; fail: free_irq(dev->irq, ps2port); fail_miserably: - list_del(&ps2port->node); iounmap(ps2port->addr); - release_mem_region(dev->hpa, GSC_STATUS + 4); + release_mem_region(dev->hpa.start, GSC_STATUS + 4); fail_nomem: kfree(ps2port); @@ -444,7 +443,7 @@ static struct parisc_device_id gscps2_device_tbl[] = { }; static struct parisc_driver parisc_ps2_driver = { - .name = "GSC PS2", + .name = "gsc_ps2", .id_table = gscps2_device_tbl, .probe = gscps2_probe, .remove = gscps2_remove, diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c index c243cb6fdfc..5704204964a 100644 --- a/drivers/input/serio/hil_mlc.c +++ b/drivers/input/serio/hil_mlc.c @@ -801,7 +801,8 @@ static int hil_mlc_serio_open(struct serio *serio) { struct hil_mlc_serio_map *map; struct hil_mlc *mlc; - if (serio->private != NULL) return -EBUSY; + if (serio_get_drvdata(serio) != NULL) + return -EBUSY; map = serio->port_data; if (map == NULL) { @@ -832,11 +833,18 @@ static void hil_mlc_serio_close(struct serio *serio) { return; } - serio->private = NULL; + serio_set_drvdata(serio, NULL); serio->drv = NULL; /* TODO wake up interruptable */ } +static struct serio_device_id hil_mlc_serio_id = { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .extra = SERIO_ANY, + .id = SERIO_ANY, +}; + int hil_mlc_register(hil_mlc *mlc) { int i; unsigned long flags; @@ -867,7 +875,7 @@ int hil_mlc_register(hil_mlc *mlc) { mlc_serio = kmalloc(sizeof(*mlc_serio), GFP_KERNEL); mlc->serio[i] = mlc_serio; memset(mlc_serio, 0, sizeof(*mlc_serio)); - mlc_serio->type = SERIO_HIL | SERIO_HIL_MLC; + mlc_serio->id = hil_mlc_serio_id; mlc_serio->write = hil_mlc_serio_write; mlc_serio->open = hil_mlc_serio_open; mlc_serio->close = hil_mlc_serio_close; diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 7629452dd64..a10348bb25e 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -764,7 +764,7 @@ MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl); static int __init hp_sdc_init_hppa(struct parisc_device *d); static struct parisc_driver hp_sdc_driver = { - .name = "HP SDC", + .name = "hp_sdc", .id_table = hp_sdc_tbl, .probe = hp_sdc_init_hppa, }; @@ -875,9 +875,9 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.dev = d; hp_sdc.irq = d->irq; hp_sdc.nmi = d->aux_irq; - hp_sdc.base_io = d->hpa; - hp_sdc.data_io = d->hpa + 0x800; - hp_sdc.status_io = d->hpa + 0x801; + hp_sdc.base_io = d->hpa.start; + hp_sdc.data_io = d->hpa.start + 0x800; + hp_sdc.status_io = d->hpa.start + 0x801; return hp_sdc_init(); } diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index 41bad07ac1a..f7b7238d835 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -415,6 +415,10 @@ static int rx_ring_size = RX_RING_SIZE; static int ticks_limit = 100; static int max_cmd_backlog = TX_RING_SIZE-1; +#ifdef CONFIG_NET_POLL_CONTROLLER +static void i596_poll_controller(struct net_device *dev); +#endif + static inline void CA(struct net_device *dev) { @@ -636,11 +640,11 @@ static int init_i596_mem(struct net_device *dev) disable_irq(dev->irq); /* disable IRQs from LAN */ DEB(DEB_INIT, - printk("RESET 82596 port: %p (with IRQ %d disabled)\n", - (void*)(dev->base_addr + PA_I82596_RESET), + printk("RESET 82596 port: %lx (with IRQ %d disabled)\n", + (dev->base_addr + PA_I82596_RESET), dev->irq)); - gsc_writel(0, (void*)(dev->base_addr + PA_I82596_RESET)); /* Hard Reset */ + gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */ udelay(100); /* Wait 100us - seems to help */ /* change the scp address */ @@ -1209,6 +1213,9 @@ static int __devinit i82596_probe(struct net_device *dev, dev->set_multicast_list = set_multicast_list; dev->tx_timeout = i596_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = i596_poll_controller; +#endif dev->priv = (void *)(dev->mem_start); @@ -1242,6 +1249,14 @@ static int __devinit i82596_probe(struct net_device *dev, return 0; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void i596_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + i596_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -1528,17 +1543,18 @@ lan_init_chip(struct parisc_device *dev) if (!dev->irq) { printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n", - __FILE__, dev->hpa); + __FILE__, dev->hpa.start); return -ENODEV; } - printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq); + printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start, + dev->irq); netdevice = alloc_etherdev(0); if (!netdevice) return -ENOMEM; - netdevice->base_addr = dev->hpa; + netdevice->base_addr = dev->hpa.start; netdevice->irq = dev->irq; retval = i82596_probe(netdevice, &dev->dev); @@ -1566,7 +1582,7 @@ static struct parisc_device_id lan_tbl[] = { MODULE_DEVICE_TABLE(parisc, lan_tbl); static struct parisc_driver lan_driver = { - .name = "Apricot", + .name = "lasi_82596", .id_table = lan_tbl, .probe = lan_init_chip, }; diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c index 38860996713..558420bc9f8 100644 --- a/drivers/parisc/asp.c +++ b/drivers/parisc/asp.c @@ -77,12 +77,12 @@ asp_init_chip(struct parisc_device *dev) struct gsc_irq gsc_irq; int ret; - asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf; + asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf; asp.name = (asp.version == 1) ? "Asp" : "Cutoff"; asp.hpa = ASP_INTERRUPT_ADDR; printk(KERN_INFO "%s version %d at 0x%lx found.\n", - asp.name, asp.version, dev->hpa); + asp.name, asp.version, dev->hpa.start); /* the IRQ ASP should use */ ret = -EBUSY; @@ -126,7 +126,7 @@ static struct parisc_device_id asp_tbl[] = { }; struct parisc_driver asp_driver = { - .name = "Asp", + .name = "asp", .id_table = asp_tbl, .probe = asp_init_chip, }; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index a3bd91a6182..9e0229f7e25 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -100,9 +100,9 @@ #define DBG_RUN_SG(x...) #endif -#define CCIO_INLINE /* inline */ -#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr)) -#define READ_U32(addr) gsc_readl((u32 *)(addr)) +#define CCIO_INLINE inline +#define WRITE_U32(value, addr) __raw_writel(value, addr) +#define READ_U32(addr) __raw_readl(addr) #define U2_IOA_RUNWAY 0x580 #define U2_BC_GSC 0x501 @@ -115,28 +115,28 @@ struct ioa_registers { /* Runway Supervisory Set */ - volatile int32_t unused1[12]; - volatile uint32_t io_command; /* Offset 12 */ - volatile uint32_t io_status; /* Offset 13 */ - volatile uint32_t io_control; /* Offset 14 */ - volatile int32_t unused2[1]; + int32_t unused1[12]; + uint32_t io_command; /* Offset 12 */ + uint32_t io_status; /* Offset 13 */ + uint32_t io_control; /* Offset 14 */ + int32_t unused2[1]; /* Runway Auxiliary Register Set */ - volatile uint32_t io_err_resp; /* Offset 0 */ - volatile uint32_t io_err_info; /* Offset 1 */ - volatile uint32_t io_err_req; /* Offset 2 */ - volatile uint32_t io_err_resp_hi; /* Offset 3 */ - volatile uint32_t io_tlb_entry_m; /* Offset 4 */ - volatile uint32_t io_tlb_entry_l; /* Offset 5 */ - volatile uint32_t unused3[1]; - volatile uint32_t io_pdir_base; /* Offset 7 */ - volatile uint32_t io_io_low_hv; /* Offset 8 */ - volatile uint32_t io_io_high_hv; /* Offset 9 */ - volatile uint32_t unused4[1]; - volatile uint32_t io_chain_id_mask; /* Offset 11 */ - volatile uint32_t unused5[2]; - volatile uint32_t io_io_low; /* Offset 14 */ - volatile uint32_t io_io_high; /* Offset 15 */ + uint32_t io_err_resp; /* Offset 0 */ + uint32_t io_err_info; /* Offset 1 */ + uint32_t io_err_req; /* Offset 2 */ + uint32_t io_err_resp_hi; /* Offset 3 */ + uint32_t io_tlb_entry_m; /* Offset 4 */ + uint32_t io_tlb_entry_l; /* Offset 5 */ + uint32_t unused3[1]; + uint32_t io_pdir_base; /* Offset 7 */ + uint32_t io_io_low_hv; /* Offset 8 */ + uint32_t io_io_high_hv; /* Offset 9 */ + uint32_t unused4[1]; + uint32_t io_chain_id_mask; /* Offset 11 */ + uint32_t unused5[2]; + uint32_t io_io_low; /* Offset 14 */ + uint32_t io_io_high; /* Offset 15 */ }; /* @@ -226,7 +226,7 @@ struct ioa_registers { */ struct ioc { - struct ioa_registers *ioc_hpa; /* I/O MMU base address */ + struct ioa_registers __iomem *ioc_regs; /* I/O MMU base address */ u8 *res_map; /* resource map, bit == pdir entry */ u64 *pdir_base; /* physical base address */ u32 pdir_size; /* bytes, function of IOV Space size */ @@ -595,7 +595,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, ** Grab virtual index [0:11] ** Deposit virt_idx bits into I/O PDIR word */ - asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba)); + asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba)); asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci)); asm volatile ("depw %1,15,12,%0" : "+r" (pa) : "r" (ci)); @@ -613,7 +613,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, ** the real mode coherence index generation of U2, the PDIR entry ** must be flushed to memory to retain coherence." */ - asm volatile("fdc 0(%0)" : : "r" (pdir_ptr)); + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); asm volatile("sync"); } @@ -636,7 +636,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt) byte_cnt += chain_size; while(byte_cnt > chain_size) { - WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command); + WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_regs->io_command); iovp += chain_size; byte_cnt -= chain_size; } @@ -684,7 +684,7 @@ ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) ** Hopefully someone figures out how to patch (NOP) the ** FDC/SYNC out at boot time. */ - asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7])); + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr[7])); iovp += IOVP_SIZE; byte_cnt -= IOVP_SIZE; @@ -1251,7 +1251,7 @@ static struct parisc_device_id ccio_tbl[] = { static int ccio_probe(struct parisc_device *dev); static struct parisc_driver ccio_driver = { - .name = "U2:Uturn", + .name = "ccio", .id_table = ccio_tbl, .probe = ccio_probe, }; @@ -1314,14 +1314,13 @@ ccio_ioc_init(struct ioc *ioc) ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64); - BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */ + BUG_ON(ioc->pdir_size > 8 * 1024 * 1024); /* max pdir size <= 8MB */ /* Verify it's a power of two */ BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT)); - DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n", - __FUNCTION__, - ioc->ioc_hpa, + DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n", + __FUNCTION__, ioc->ioc_regs, (unsigned long) num_physpages >> (20 - PAGE_SHIFT), iova_space_size>>20, iov_order + PAGE_SHIFT); @@ -1329,13 +1328,12 @@ ccio_ioc_init(struct ioc *ioc) ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL, get_order(ioc->pdir_size)); if(NULL == ioc->pdir_base) { - panic("%s:%s() could not allocate I/O Page Table\n", __FILE__, - __FUNCTION__); + panic("%s() could not allocate I/O Page Table\n", __FUNCTION__); } memset(ioc->pdir_base, 0, ioc->pdir_size); BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base); - DBG_INIT(" base %p", ioc->pdir_base); + DBG_INIT(" base %p\n", ioc->pdir_base); /* resource map size dictated by pdir_size */ ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3; @@ -1344,8 +1342,7 @@ ccio_ioc_init(struct ioc *ioc) ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL, get_order(ioc->res_size)); if(NULL == ioc->res_map) { - panic("%s:%s() could not allocate resource map\n", __FILE__, - __FUNCTION__); + panic("%s() could not allocate resource map\n", __FUNCTION__); } memset(ioc->res_map, 0, ioc->res_size); @@ -1366,44 +1363,58 @@ ccio_ioc_init(struct ioc *ioc) ** Initialize IOA hardware */ WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift, - &ioc->ioc_hpa->io_chain_id_mask); + &ioc->ioc_regs->io_chain_id_mask); WRITE_U32(virt_to_phys(ioc->pdir_base), - &ioc->ioc_hpa->io_pdir_base); + &ioc->ioc_regs->io_pdir_base); /* ** Go to "Virtual Mode" */ - WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control); + WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_regs->io_control); /* ** Initialize all I/O TLB entries to 0 (Valid bit off). */ - WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m); - WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l); + WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_m); + WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_l); for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) { WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)), - &ioc->ioc_hpa->io_command); + &ioc->ioc_regs->io_command); } } static void -ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr) +ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr) { int result; res->parent = NULL; res->flags = IORESOURCE_MEM; - res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16; - res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1; + /* + * bracing ((signed) ...) are required for 64bit kernel because + * we only want to sign extend the lower 16 bits of the register. + * The upper 16-bits of range registers are hardcoded to 0xffff. + */ + res->start = (unsigned long)((signed) READ_U32(ioaddr) << 16); + res->end = (unsigned long)((signed) (READ_U32(ioaddr + 4) << 16) - 1); res->name = name; + /* + * Check if this MMIO range is disable + */ if (res->end + 1 == res->start) return; - result = request_resource(&iomem_resource, res); + + /* On some platforms (e.g. K-Class), we have already registered + * resources for devices reported by firmware. Some are children + * of ccio. + * "insert" ccio ranges in the mmio hierarchy (/proc/iomem). + */ + result = insert_resource(&iomem_resource, res); if (result < 0) { - printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n", - __FILE__, res->start, res->end); + printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n", + __FUNCTION__, res->start, res->end); } } @@ -1414,9 +1425,8 @@ static void __init ccio_init_resources(struct ioc *ioc) sprintf(name, "GSC Bus [%d/]", ioc->hw_path); - ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low); - ccio_init_resource(res + 1, name, - (unsigned long)&ioc->ioc_hpa->io_io_low_hv); + ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low); + ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv); } static int new_ioc_area(struct resource *res, unsigned long size, @@ -1427,7 +1437,12 @@ static int new_ioc_area(struct resource *res, unsigned long size, res->start = (max - size + 1) &~ (align - 1); res->end = res->start + size; - if (!request_resource(&iomem_resource, res)) + + /* We might be trying to expand the MMIO range to include + * a child device that has already registered it's MMIO space. + * Use "insert" instead of request_resource(). + */ + if (!insert_resource(&iomem_resource, res)) return 0; return new_ioc_area(res, size, min, max - size, align); @@ -1486,15 +1501,15 @@ int ccio_allocate_resource(const struct parisc_device *dev, if (!expand_ioc_area(parent, size, min, max, align)) { __raw_writel(((parent->start)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_low)); + &ioc->ioc_regs->io_io_low); __raw_writel(((parent->end)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_high)); + &ioc->ioc_regs->io_io_high); } else if (!expand_ioc_area(parent + 1, size, min, max, align)) { parent++; __raw_writel(((parent->start)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_low_hv)); + &ioc->ioc_regs->io_io_low_hv); __raw_writel(((parent->end)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_high_hv)); + &ioc->ioc_regs->io_io_high_hv); } else { return -EBUSY; } @@ -1521,7 +1536,12 @@ int ccio_request_resource(const struct parisc_device *dev, return -EBUSY; } - return request_resource(parent, res); + /* "transparent" bus bridges need to register MMIO resources + * firmware assigned them. e.g. children of hppb.c (e.g. K-class) + * registered their resources in the PDC "bus walk" (See + * arch/parisc/kernel/inventory.c). + */ + return insert_resource(parent, res); } /** @@ -1546,7 +1566,7 @@ static int ccio_probe(struct parisc_device *dev) ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn"; - printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa); + printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start); for (i = 0; i < ioc_count; i++) { ioc_p = &(*ioc_p)->next; @@ -1554,7 +1574,7 @@ static int ccio_probe(struct parisc_device *dev) *ioc_p = ioc; ioc->hw_path = dev->hw_path; - ioc->ioc_hpa = (struct ioa_registers *)dev->hpa; + ioc->ioc_regs = ioremap(dev->hpa.start, 4096); ccio_ioc_init(ioc); ccio_init_resources(ioc); hppa_dma_ops = &ccio_ops; diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c index 57e6385976e..356b8357bcc 100644 --- a/drivers/parisc/ccio-rm-dma.c +++ b/drivers/parisc/ccio-rm-dma.c @@ -167,7 +167,7 @@ ccio_probe(struct parisc_device *dev) { printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME, dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn", - dev->hpa); + dev->hpa.start); /* ** FIXME - should check U2 registers to verify it's really running diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 2f2dbef2c3b..5ab75334c57 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -178,6 +178,8 @@ static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base_addr = d->hba.base_addr; unsigned long flags; + DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where, + size); spin_lock_irqsave(&d->dinosaur_pen, flags); /* tell HW which CFG address */ @@ -211,6 +213,8 @@ static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base_addr = d->hba.base_addr; unsigned long flags; + DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where, + size); spin_lock_irqsave(&d->dinosaur_pen, flags); /* avoid address stepping feature */ @@ -295,7 +299,7 @@ static void dino_disable_irq(unsigned int irq) struct dino_device *dino_dev = irq_desc[irq].handler_data; int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq); - DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq); + DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); /* Clear the matching bit in the IMR register */ dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq)); @@ -308,7 +312,7 @@ static void dino_enable_irq(unsigned int irq) int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq); u32 tmp; - DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq); + DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); /* ** clear pending IRQ bits @@ -490,7 +494,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr) if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB))) break; } - DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n", + DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n", i, res->start, base_addr + DINO_IO_ADDR_EN); __raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN); } @@ -683,6 +687,14 @@ static void __init dino_card_init(struct dino_device *dino_dev) { u32 brdg_feat = 0x00784e05; + unsigned long status; + + status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS); + if (status & 0x0000ff80) { + __raw_writel(0x00000005, + dino_dev->hba.base_addr+DINO_IO_COMMAND); + udelay(1); + } __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK); __raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN); @@ -902,15 +914,15 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp); ** If so, initialize the chip appropriately (card-mode vs bridge mode). ** Much of the initialization is common though. */ -static int __init -dino_driver_callback(struct parisc_device *dev) +static int __init dino_probe(struct parisc_device *dev) { struct dino_device *dino_dev; // Dino specific control struct const char *version = "unknown"; char *name; int is_cujo = 0; struct pci_bus *bus; - + unsigned long hpa = dev->hpa.start; + name = "Dino"; if (is_card_dino(&dev->id)) { version = "3.x (card mode)"; @@ -928,11 +940,11 @@ dino_driver_callback(struct parisc_device *dev) } } - printk("%s version %s found at 0x%lx\n", name, version, dev->hpa); + printk("%s version %s found at 0x%lx\n", name, version, hpa); - if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) { + if (!request_mem_region(hpa, PAGE_SIZE, name)) { printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n", - dev->hpa); + hpa); return 1; } @@ -940,12 +952,12 @@ dino_driver_callback(struct parisc_device *dev) if (is_cujo && dev->id.hversion_rev == 1) { #ifdef CONFIG_IOMMU_CCIO printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n"); - if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) { + if (hpa == (unsigned long)CUJO_RAVEN_ADDR) { ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE); - } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) { + } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) { ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE); } else { - printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa); + printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa); } #endif } else if (!is_cujo && !is_card_dino(&dev->id) && @@ -970,7 +982,7 @@ dino_driver_callback(struct parisc_device *dev) memset(dino_dev, 0, sizeof(struct dino_device)); dino_dev->hba.dev = dev; - dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */ + dino_dev->hba.base_addr = ioremap(hpa, 4096); dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */ spin_lock_init(&dino_dev->dinosaur_pen); dino_dev->hba.iommu = ccio_get_iommu(dev); @@ -1027,9 +1039,9 @@ static struct parisc_device_id dino_tbl[] = { }; static struct parisc_driver dino_driver = { - .name = "Dino", + .name = "dino", .id_table = dino_tbl, - .probe = dino_driver_callback, + .probe = dino_probe, }; /* diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 043d47aea75..6362bf99eff 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -315,7 +315,7 @@ static int __devinit eisa_probe(struct parisc_device *dev) char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", - name, dev->hpa); + name, dev->hpa.start); eisa_dev.hba.dev = dev; eisa_dev.hba.iommu = ccio_get_iommu(dev); @@ -397,7 +397,7 @@ static struct parisc_device_id eisa_tbl[] = { MODULE_DEVICE_TABLE(parisc, eisa_tbl); static struct parisc_driver eisa_driver = { - .name = "EISA Bus Adapter", + .name = "eisa_ba", .id_table = eisa_tbl, .probe = eisa_probe, }; diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index af5e02526a1..16d40f95978 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -183,12 +183,20 @@ void gsc_asic_assign_irq(struct gsc_asic *asic, int local_irq, int *irqp) *irqp = irq; } +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, void (*choose_irq)(struct parisc_device *, void *)) { struct device *dev; + struct klist_iter i; - list_for_each_entry(dev, &parent->dev.children, node) { + klist_iter_init(&parent->dev.klist_children, &i); + while ((dev = next_device(&i))) { struct parisc_device *padev = to_parisc_device(dev); /* work-around for 715/64 and others which have parent @@ -197,6 +205,7 @@ void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, return gsc_fixup_irqs(padev, ctrl, choose_irq); choose_irq(padev, ctrl); } + klist_iter_exit(&i); } int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic) diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index e869c602037..5edf93f8075 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -68,14 +68,14 @@ static int hppb_probe(struct parisc_device *dev) memset(card->next, '\0', sizeof(struct hppb_card)); card = card->next; } - printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa); + printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start); - card->hpa = dev->hpa; + card->hpa = dev->hpa.start; card->mmio_region.name = "HP-PB Bus"; card->mmio_region.flags = IORESOURCE_MEM; - card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW); - card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1; + card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW); + card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1; status = ccio_request_resource(dev, &card->mmio_region); if(status < 0) { @@ -93,7 +93,7 @@ static struct parisc_device_id hppb_tbl[] = { }; static struct parisc_driver hppb_driver = { - .name = "Gecko Boa", + .name = "gecko_boa", .id_table = hppb_tbl, .probe = hppb_probe, }; diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 7a57c1b8373..a39fbfef789 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -244,7 +244,7 @@ static struct irt_entry *iosapic_alloc_irt(int num_entries) * 4-byte alignment on 32-bit kernels */ a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL); - a = (a + 7) & ~7; + a = (a + 7UL) & ~7UL; return (struct irt_entry *)a; } diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c index cb84a4e84a2..a8c20396ffb 100644 --- a/drivers/parisc/lasi.c +++ b/drivers/parisc/lasi.c @@ -175,7 +175,7 @@ lasi_init_chip(struct parisc_device *dev) return -ENOMEM; lasi->name = "Lasi"; - lasi->hpa = dev->hpa; + lasi->hpa = dev->hpa.start; /* Check the 4-bit (yes, only 4) version register */ lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf; @@ -233,7 +233,7 @@ static struct parisc_device_id lasi_tbl[] = { }; struct parisc_driver lasi_driver = { - .name = "Lasi", + .name = "lasi", .id_table = lasi_tbl, .probe = lasi_init_chip, }; diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 7fdd80b7eb4..5e495dcbc58 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1288,7 +1288,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) ** Adjust "window" for this rope. */ rsize /= ROPES_PER_IOC; - r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa); + r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start); r->end = r->start + rsize; } else { r->end = r->start = 0; /* Not enabled. */ @@ -1458,7 +1458,7 @@ lba_driver_probe(struct parisc_device *dev) u32 func_class; void *tmp_obj; char *version; - void __iomem *addr = ioremap(dev->hpa, 4096); + void __iomem *addr = ioremap(dev->hpa.start, 4096); /* Read HW Rev First */ func_class = READ_REG32(addr + LBA_FCLASS); @@ -1476,7 +1476,7 @@ lba_driver_probe(struct parisc_device *dev) } printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xf, dev->hpa); + MODULE_NAME, version, func_class & 0xf, dev->hpa.start); if (func_class < 2) { printk(KERN_WARNING "Can't support LBA older than " @@ -1503,17 +1503,17 @@ lba_driver_probe(struct parisc_device *dev) * but for the mask for func_class. */ printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xff, dev->hpa); + MODULE_NAME, version, func_class & 0xff, dev->hpa.start); cfg_ops = &mercury_cfg_ops; } else { - printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa); + printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start); return -ENODEV; } /* ** Tell I/O SAPIC driver we have a IRQ handler/region. */ - tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE); + tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't ** have an IRT entry will get NULL back from iosapic code. @@ -1635,7 +1635,7 @@ void __init lba_init(void) */ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) { - void __iomem * base_addr = ioremap(lba->hpa, 4096); + void __iomem * base_addr = ioremap(lba->hpa.start, 4096); imask <<= 2; /* adjust for hints - 2 more bits */ diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c index 286902298e3..95bd07b8b61 100644 --- a/drivers/parisc/led.c +++ b/drivers/parisc/led.c @@ -18,6 +18,9 @@ * Changes: * - Audit copy_from_user in led_proc_write. * Daniele Bellucci <bellucda@tiscali.it> + * - Switch from using a tasklet to a work queue, so the led_LCD_driver + * can sleep. + * David Pye <dmp@davidmpye.dyndns.org> */ #include <linux/config.h> @@ -37,6 +40,7 @@ #include <linux/proc_fs.h> #include <linux/ctype.h> #include <linux/blkdev.h> +#include <linux/workqueue.h> #include <linux/rcupdate.h> #include <asm/io.h> #include <asm/processor.h> @@ -47,25 +51,30 @@ #include <asm/uaccess.h> /* The control of the LEDs and LCDs on PARISC-machines have to be done - completely in software. The necessary calculations are done in a tasklet - which is scheduled at every timer interrupt and since the calculations - may consume relatively much CPU-time some of the calculations can be + completely in software. The necessary calculations are done in a work queue + task which is scheduled regularly, and since the calculations may consume a + relatively large amount of CPU time, some of the calculations can be turned off with the following variables (controlled via procfs) */ static int led_type = -1; -static int led_heartbeat = 1; -static int led_diskio = 1; -static int led_lanrxtx = 1; +static unsigned char lastleds; /* LED state from most recent update */ +static unsigned int led_heartbeat = 1; +static unsigned int led_diskio = 1; +static unsigned int led_lanrxtx = 1; static char lcd_text[32]; static char lcd_text_default[32]; + +static struct workqueue_struct *led_wq; +static void led_work_func(void *); +static DECLARE_WORK(led_task, led_work_func, NULL); + #if 0 #define DPRINTK(x) printk x #else #define DPRINTK(x) #endif - struct lcd_block { unsigned char command; /* stores the command byte */ unsigned char on; /* value for turning LED on */ @@ -116,12 +125,27 @@ lcd_info __attribute__((aligned(8))) = #define LCD_DATA_REG lcd_info.lcd_data_reg_addr #define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */ +#define LED_HASLCD 1 +#define LED_NOLCD 0 + +/* The workqueue must be created at init-time */ +static int start_task(void) +{ + /* Display the default text now */ + if (led_type == LED_HASLCD) lcd_print( lcd_text_default ); + + /* Create the work queue and queue the LED task */ + led_wq = create_singlethread_workqueue("led_wq"); + queue_work(led_wq, &led_task); + + return 0; +} + +device_initcall(start_task); /* ptr to LCD/LED-specific function */ static void (*led_func_ptr) (unsigned char); -#define LED_HASLCD 1 -#define LED_NOLCD 0 #ifdef CONFIG_PROC_FS static int led_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data) @@ -286,52 +310,35 @@ static void led_LASI_driver(unsigned char leds) /* ** ** led_LCD_driver() - ** - ** The logic of the LCD driver is, that we write at every scheduled call - ** only to one of LCD_CMD_REG _or_ LCD_DATA_REG - registers. - ** That way we don't need to let this tasklet busywait for min_cmd_delay - ** milliseconds. - ** - ** TODO: check the value of "min_cmd_delay" against the value of HZ. ** */ static void led_LCD_driver(unsigned char leds) { - static int last_index; /* 0:heartbeat, 1:disk, 2:lan_in, 3:lan_out */ - static int last_was_cmd;/* 0: CMD was written last, 1: DATA was last */ - struct lcd_block *block_ptr; - int value; - - switch (last_index) { - case 0: block_ptr = &lcd_info.heartbeat; - value = leds & LED_HEARTBEAT; - break; - case 1: block_ptr = &lcd_info.disk_io; - value = leds & LED_DISK_IO; - break; - case 2: block_ptr = &lcd_info.lan_rcv; - value = leds & LED_LAN_RCV; - break; - case 3: block_ptr = &lcd_info.lan_tx; - value = leds & LED_LAN_TX; - break; - default: /* should never happen: */ - return; - } - - if (last_was_cmd) { - /* write the value to the LCD data port */ - gsc_writeb( value ? block_ptr->on : block_ptr->off, LCD_DATA_REG ); - } else { - /* write the command-byte to the LCD command register */ - gsc_writeb( block_ptr->command, LCD_CMD_REG ); - } + static int i; + static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO, + LED_LAN_RCV, LED_LAN_TX }; - /* now update the vars for the next interrupt iteration */ - if (++last_was_cmd == 2) { /* switch between cmd & data */ - last_was_cmd = 0; - if (++last_index == 4) - last_index = 0; /* switch back to heartbeat index */ + static struct lcd_block * blockp[4] = { + &lcd_info.heartbeat, + &lcd_info.disk_io, + &lcd_info.lan_rcv, + &lcd_info.lan_tx + }; + + /* Convert min_cmd_delay to milliseconds */ + unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000); + + for (i=0; i<4; ++i) + { + if ((leds & mask[i]) != (lastleds & mask[i])) + { + gsc_writeb( blockp[i]->command, LCD_CMD_REG ); + msleep(msec_cmd_delay); + + gsc_writeb( leds & mask[i] ? blockp[i]->on : + blockp[i]->off, LCD_DATA_REG ); + msleep(msec_cmd_delay); + } } } @@ -356,7 +363,7 @@ static __inline__ int led_get_net_activity(void) rx_total = tx_total = 0; - /* we are running as tasklet, so locking dev_base + /* we are running as a workqueue task, so locking dev_base * for reading should be OK */ read_lock(&dev_base_lock); rcu_read_lock(); @@ -405,7 +412,7 @@ static __inline__ int led_get_diskio_activity(void) static unsigned long last_pgpgin, last_pgpgout; struct page_state pgstat; int changed; - + get_full_page_state(&pgstat); /* get no of sectors in & out */ /* Just use a very simple calculation here. Do not care about overflow, @@ -413,86 +420,70 @@ static __inline__ int led_get_diskio_activity(void) changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout); last_pgpgin = pgstat.pgpgin; last_pgpgout = pgstat.pgpgout; - + return (changed ? LED_DISK_IO : 0); } /* - ** led_tasklet_func() + ** led_work_func() ** - ** is scheduled at every timer interrupt from time.c and - ** updates the chassis LCD/LED + ** manages when and which chassis LCD/LED gets updated TODO: - display load average (older machines like 715/64 have 4 "free" LED's for that) - optimizations */ -#define HEARTBEAT_LEN (HZ*6/100) -#define HEARTBEAT_2ND_RANGE_START (HZ*22/100) +#define HEARTBEAT_LEN (HZ*10/100) +#define HEARTBEAT_2ND_RANGE_START (HZ*28/100) #define HEARTBEAT_2ND_RANGE_END (HEARTBEAT_2ND_RANGE_START + HEARTBEAT_LEN) -#define NORMALIZED_COUNT(count) (count/(HZ/100)) +#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000)) -static void led_tasklet_func(unsigned long unused) +static void led_work_func (void *unused) { - static unsigned char lastleds; - unsigned char currentleds; /* stores current value of the LEDs */ - static unsigned long count; /* static incremented value, not wrapped */ + static unsigned long last_jiffies; static unsigned long count_HZ; /* counter in range 0..HZ */ + unsigned char currentleds = 0; /* stores current value of the LEDs */ /* exit if not initialized */ if (!led_func_ptr) return; - /* increment the local counters */ - ++count; - if (++count_HZ == HZ) + /* increment the heartbeat timekeeper */ + count_HZ += jiffies - last_jiffies; + last_jiffies = jiffies; + if (count_HZ >= HZ) count_HZ = 0; - currentleds = lastleds; - - if (led_heartbeat) - { - /* flash heartbeat-LED like a real heart (2 x short then a long delay) */ - if (count_HZ<HEARTBEAT_LEN || - (count_HZ>=HEARTBEAT_2ND_RANGE_START && count_HZ<HEARTBEAT_2ND_RANGE_END)) - currentleds |= LED_HEARTBEAT; - else - currentleds &= ~LED_HEARTBEAT; - } - - /* look for network activity and flash LEDs respectively */ - if (led_lanrxtx && ((NORMALIZED_COUNT(count)+(8/2)) & 7) == 0) + if (likely(led_heartbeat)) { - currentleds &= ~(LED_LAN_RCV | LED_LAN_TX); - currentleds |= led_get_net_activity(); + /* flash heartbeat-LED like a real heart + * (2 x short then a long delay) + */ + if (count_HZ < HEARTBEAT_LEN || + (count_HZ >= HEARTBEAT_2ND_RANGE_START && + count_HZ < HEARTBEAT_2ND_RANGE_END)) + currentleds |= LED_HEARTBEAT; } - /* avoid to calculate diskio-stats at same irq as netio-stats */ - if (led_diskio && (NORMALIZED_COUNT(count) & 7) == 0) - { - currentleds &= ~LED_DISK_IO; - currentleds |= led_get_diskio_activity(); - } + if (likely(led_lanrxtx)) currentleds |= led_get_net_activity(); + if (likely(led_diskio)) currentleds |= led_get_diskio_activity(); /* blink all LEDs twice a second if we got an Oops (HPMC) */ - if (oops_in_progress) { + if (unlikely(oops_in_progress)) currentleds = (count_HZ<=(HZ/2)) ? 0 : 0xff; - } - - /* update the LCD/LEDs */ - if (currentleds != lastleds) { - led_func_ptr(currentleds); - lastleds = currentleds; - } -} -/* main led tasklet struct (scheduled from time.c) */ -DECLARE_TASKLET_DISABLED(led_tasklet, led_tasklet_func, 0); + if (currentleds != lastleds) + { + led_func_ptr(currentleds); /* Update the LCD/LEDs */ + lastleds = currentleds; + } + queue_delayed_work(led_wq, &led_task, LED_UPDATE_INTERVAL); +} /* ** led_halt() @@ -522,9 +513,13 @@ static int led_halt(struct notifier_block *nb, unsigned long event, void *buf) default: return NOTIFY_DONE; } - /* completely stop the LED/LCD tasklet */ - tasklet_disable(&led_tasklet); - + /* Cancel the work item and delete the queue */ + if (led_wq) { + cancel_rearming_delayed_workqueue(led_wq, &led_task); + destroy_workqueue(led_wq); + led_wq = NULL; + } + if (lcd_info.model == DISPLAY_MODEL_LCD) lcd_print(txt); else @@ -559,7 +554,6 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d printk(KERN_INFO "LCD display at %lx,%lx registered\n", LCD_CMD_REG , LCD_DATA_REG); led_func_ptr = led_LCD_driver; - lcd_print( lcd_text_default ); led_type = LED_HASLCD; break; @@ -589,9 +583,11 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d initialized++; register_reboot_notifier(&led_notifier); - /* start the led tasklet for the first time */ - tasklet_enable(&led_tasklet); - + /* Ensure the work is queued */ + if (led_wq) { + queue_work(led_wq, &led_task); + } + return 0; } @@ -626,8 +622,8 @@ void __init register_led_regions(void) ** lcd_print() ** ** Displays the given string on the LCD-Display of newer machines. - ** lcd_print() disables the timer-based led tasklet during its - ** execution and enables it afterwards again. + ** lcd_print() disables/enables the timer-based led work queue to + ** avoid a race condition while writing the CMD/DATA register pair. ** */ int lcd_print( char *str ) @@ -637,12 +633,13 @@ int lcd_print( char *str ) if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD) return 0; - /* temporarily disable the led tasklet */ - tasklet_disable(&led_tasklet); + /* temporarily disable the led work task */ + if (led_wq) + cancel_rearming_delayed_workqueue(led_wq, &led_task); /* copy display string to buffer for procfs */ strlcpy(lcd_text, str, sizeof(lcd_text)); - + /* Set LCD Cursor to 1st character */ gsc_writeb(lcd_info.reset_cmd1, LCD_CMD_REG); udelay(lcd_info.min_cmd_delay); @@ -656,8 +653,10 @@ int lcd_print( char *str ) udelay(lcd_info.min_cmd_delay); } - /* re-enable the led tasklet */ - tasklet_enable(&led_tasklet); + /* re-queue the work */ + if (led_wq) { + queue_work(led_wq, &led_task); + } return lcd_info.lcd_width; } diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 67c8f3b4484..273a7417972 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -536,7 +536,7 @@ pdcs_info_read(struct subsystem *entry, char *buf) out += sprintf(out, "Memory tested: "); if ((result & 0x0F) < 0x0E) - out += sprintf(out, "%.3f MB", 0.256*(1<<(result & 0x0F))); + out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256); else out += sprintf(out, "All"); out += sprintf(out, "\n"); diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index bd8b3e5a5cd..c85653f315a 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -91,8 +91,8 @@ extern struct proc_dir_entry * proc_mckinley_root; #define DBG_RES(x...) #endif -#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW) -/* "low end" PA8800 machines use ZX1 chipset */ +#if defined(CONFIG_64BIT) +/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */ #define ZX1_SUPPORT #endif @@ -231,7 +231,7 @@ struct ioc { spinlock_t res_lock; unsigned int res_bitshift; /* from the LEFT! */ unsigned int res_size; /* size of resource map in bytes */ -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT /* FIXME : DMA HINTs not used */ unsigned long hint_mask_pdir; /* bits used for DMA hints */ unsigned int hint_shift_pdir; @@ -294,7 +294,7 @@ static unsigned long piranha_bad_128k = 0; /* Looks nice and keeps the compiler happy */ #define SBA_DEV(d) ((struct sba_device *) (d)) -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT static int reserve_sba_gart = 1; #endif @@ -314,7 +314,7 @@ static int reserve_sba_gart = 1; #define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr) #define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr) -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define READ_REG(addr) READ_REG64(addr) #define WRITE_REG(value, addr) WRITE_REG64(value, addr) #else @@ -324,7 +324,7 @@ static int reserve_sba_gart = 1; #ifdef DEBUG_SBA_INIT -/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */ +/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */ /** * sba_dump_ranges - debugging only - print ranges assigned to this IOA @@ -364,7 +364,7 @@ static void sba_dump_tlb(void __iomem *hpa) #else #define sba_dump_ranges(x) #define sba_dump_tlb(x) -#endif +#endif /* DEBUG_SBA_INIT */ #ifdef ASSERT_PDIR_SANITY @@ -674,7 +674,7 @@ sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size) * ***************************************************************/ -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT #define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir) #endif @@ -743,9 +743,8 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, * (bit #61, big endian), we have to flush and sync every time * IO-PDIR is changed in Ike/Astro. */ - if (ioc_needs_fdc) { - asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr)); - } + if (ioc_needs_fdc) + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); } @@ -769,42 +768,57 @@ static SBA_INLINE void sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) { u32 iovp = (u32) SBA_IOVP(ioc,iova); - - /* Even though this is a big-endian machine, the entries - ** in the iopdir are little endian. That's why we clear the byte - ** at +7 instead of at +0. - */ - int off = PDIR_INDEX(iovp)*sizeof(u64)+7; + u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)]; #ifdef ASSERT_PDIR_SANITY - /* Assert first pdir entry is set */ - if (0x80 != (((u8 *) ioc->pdir_base)[off])) { + /* Assert first pdir entry is set. + ** + ** Even though this is a big-endian machine, the entries + ** in the iopdir are little endian. That's why we look at + ** the byte at +7 instead of at +0. + */ + if (0x80 != (((u8 *) pdir_ptr)[7])) { sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp)); } #endif - if (byte_cnt <= IOVP_SIZE) + if (byte_cnt > IOVP_SIZE) { - iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ +#if 0 + unsigned long entries_per_cacheline = ioc_needs_fdc ? + L1_CACHE_ALIGN(((unsigned long) pdir_ptr)) + - (unsigned long) pdir_ptr; + : 262144; +#endif - /* - ** clear I/O PDIR entry "valid" bit - ** Do NOT clear the rest - save it for debugging. - ** We should only clear bits that have previously - ** been enabled. - */ - ((u8 *)(ioc->pdir_base))[off] = 0; - } else { - u32 t = get_order(byte_cnt) + PAGE_SHIFT; + /* set "size" field for PCOM */ + iovp |= get_order(byte_cnt) + PAGE_SHIFT; - iovp |= t; do { /* clear I/O Pdir entry "valid" bit first */ - ((u8 *)(ioc->pdir_base))[off] = 0; - off += sizeof(u64); + ((u8 *) pdir_ptr)[7] = 0; + if (ioc_needs_fdc) { + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); +#if 0 + entries_per_cacheline = L1_CACHE_SHIFT - 3; +#endif + } + pdir_ptr++; byte_cnt -= IOVP_SIZE; - } while (byte_cnt > 0); - } + } while (byte_cnt > IOVP_SIZE); + } else + iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ + + /* + ** clear I/O PDIR entry "valid" bit. + ** We have to R/M/W the cacheline regardless how much of the + ** pdir entry that we clobber. + ** The rest of the entry would be useful for debugging if we + ** could dump core on HPMC. + */ + ((u8 *) pdir_ptr)[7] = 0; + if (ioc_needs_fdc) + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM); } @@ -819,18 +833,29 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) static int sba_dma_supported( struct device *dev, u64 mask) { struct ioc *ioc; + if (dev == NULL) { printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); BUG(); return(0); } - ioc = GET_IOC(dev); + /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, + * then fall back to 32-bit if that fails. + * We are just "encouraging" 32-bit DMA masks here since we can + * never allow IOMMU bypass unless we add special support for ZX1. + */ + if (mask > ~0U) + return 0; - /* check if mask is > than the largest IO Virt Address */ + ioc = GET_IOC(dev); - return((int) (mask >= (ioc->ibase + - (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); + /* + * check if mask is >= than the current max IO Virt Address + * The max IO Virt address will *always* < 30 bits. + */ + return((int)(mask >= (ioc->ibase - 1 + + (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); } @@ -898,11 +923,17 @@ sba_map_single(struct device *dev, void *addr, size_t size, size -= IOVP_SIZE; pdir_start++; } - /* form complete address */ + + /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + #ifdef ASSERT_PDIR_SANITY sba_check_pdir(ioc,"Check after sba_map_single()"); #endif spin_unlock_irqrestore(&ioc->res_lock, flags); + + /* form complete address */ return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG); } @@ -958,12 +989,19 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, d--; } ioc->saved_cnt = 0; + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ } #else /* DELAYED_RESOURCE_CNT == 0 */ sba_free_range(ioc, iova, size); + + /* If fdc's were issued, force fdc's to be visible now */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ #endif /* DELAYED_RESOURCE_CNT == 0 */ + spin_unlock_irqrestore(&ioc->res_lock, flags); /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support. @@ -1106,6 +1144,10 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, */ filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry); + /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + #ifdef ASSERT_PDIR_SANITY if (sba_check_pdir(ioc,"Check after sba_map_sg()")) { @@ -1234,8 +1276,10 @@ sba_alloc_pdir(unsigned int pdir_size) unsigned long pdir_order = get_order(pdir_size); pdir_base = __get_free_pages(GFP_KERNEL, pdir_order); - if (NULL == (void *) pdir_base) - panic("sba_ioc_init() could not allocate I/O Page Table\n"); + if (NULL == (void *) pdir_base) { + panic("%s() could not allocate I/O Page Table\n", + __FUNCTION__); + } /* If this is not PA8700 (PCX-W2) ** OR newer than ver 2.2 @@ -1322,19 +1366,29 @@ sba_alloc_pdir(unsigned int pdir_size) return (void *) pdir_base; } +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + /* setup Mercury or Elroy IBASE/IMASK registers. */ -static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) +static void +setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) { - /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ + /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ extern void lba_set_iregs(struct parisc_device *, u32, u32); struct device *dev; + struct klist_iter i; - list_for_each_entry(dev, &sba->dev.children, node) { + klist_iter_init(&sba->dev.klist_children, &i); + while ((dev = next_device(&i))) { struct parisc_device *lba = to_parisc_device(dev); - int rope_num = (lba->hpa >> 13) & 0xf; + int rope_num = (lba->hpa.start >> 13) & 0xf; if (rope_num >> 3 == ioc_num) lba_set_iregs(lba, ioc->ibase, ioc->imask); } + klist_iter_exit(&i); } static void @@ -1343,7 +1397,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) u32 iova_space_mask; u32 iova_space_size; int iov_order, tcnfg; -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT int agp_found = 0; #endif /* @@ -1380,7 +1434,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) DBG_INIT("%s() pdir %p size %x\n", __FUNCTION__, ioc->pdir_base, ioc->pdir_size); -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); @@ -1404,7 +1458,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK); -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* ** Setting the upper bits makes checking for bypass addresses ** a little faster later on. @@ -1437,7 +1491,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) */ WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM); -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT /* ** If an AGP device is present, only use half of the IOV space ** for PCI DMA. Unfortunately we can't know ahead of time @@ -1489,11 +1543,9 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) if (iova_space_size < (1 << (20 - PAGE_SHIFT))) { iova_space_size = 1 << (20 - PAGE_SHIFT); } -#ifdef __LP64__ else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) { iova_space_size = 1 << (30 - PAGE_SHIFT); } -#endif /* ** iova space must be log2() in size. @@ -1519,7 +1571,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) DBG_INIT("%s() pdir %p size %x\n", __FUNCTION__, ioc->pdir_base, pdir_size); -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT /* FIXME : DMA HINTs not used */ ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); @@ -1590,7 +1642,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset) { - return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE); + return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE); } static void sba_hw_init(struct sba_device *sba_dev) @@ -1968,7 +2020,7 @@ sba_driver_callback(struct parisc_device *dev) u32 func_class; int i; char *version; - void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE); + void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE); sba_dump_ranges(sba_addr); @@ -2010,7 +2062,7 @@ sba_driver_callback(struct parisc_device *dev) } printk(KERN_INFO "%s found %s at 0x%lx\n", - MODULE_NAME, version, dev->hpa); + MODULE_NAME, version, dev->hpa.start); sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL); if (!sba_dev) { diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index e0efed796b9..bab3bcabcb6 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -11,6 +11,7 @@ * (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca> * (C) Copyright 2001 John Marvin <jsm fc hp com> * (C) Copyright 2003 Grant Grundler <grundler parisc-linux org> + * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -405,6 +406,7 @@ static void __devinit superio_serial_init(void) serial[0].iobase = sio_dev.sp1_base; serial[0].irq = SP1_IRQ; + spin_lock_init(&serial[0].lock); retval = early_serial_setup(&serial[0]); if (retval < 0) { @@ -414,6 +416,7 @@ static void __devinit superio_serial_init(void) serial[1].iobase = sio_dev.sp2_base; serial[1].irq = SP2_IRQ; + spin_lock_init(&serial[1].lock); retval = early_serial_setup(&serial[1]); if (retval < 0) diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c index e547d7d024d..17dce2adf7f 100644 --- a/drivers/parisc/wax.c +++ b/drivers/parisc/wax.c @@ -81,7 +81,7 @@ wax_init_chip(struct parisc_device *dev) return -ENOMEM; wax->name = "wax"; - wax->hpa = dev->hpa; + wax->hpa = dev->hpa.start; wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */ printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 02d72acd1c8..fde29a75f88 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -359,11 +359,12 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", + dev->hpa.start); return -ENODEV; } - port = dev->hpa + PARPORT_GSC_OFFSET; + port = dev->hpa.start + PARPORT_GSC_OFFSET; /* some older machines with ASP-chip don't support * the enhanced parport modes. diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 4cbb6187cc4..459a4daebec 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -98,7 +98,7 @@ MODULE_DEVICE_TABLE(parisc, lasi700_ids); static int __init lasi700_probe(struct parisc_device *dev) { - unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET; + unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET; struct NCR_700_Host_Parameters *hostdata; struct Scsi_Host *host; @@ -125,8 +125,6 @@ lasi700_probe(struct parisc_device *dev) hostdata->dmode_extra = DMODE_FC2; } - NCR_700_set_mem_mapped(hostdata); - host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev); if (!host) goto out_kfree; @@ -168,7 +166,7 @@ lasi700_driver_remove(struct parisc_device *dev) } static struct parisc_driver lasi700_driver = { - .name = "Lasi SCSI", + .name = "lasi_scsi", .id_table = lasi700_ids, .probe = lasi700_probe, .remove = __devexit_p(lasi700_driver_remove), diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 5a51051e31f..b131432c677 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -88,7 +88,7 @@ zalon_probe(struct parisc_device *dev) struct gsc_irq gsc_irq; u32 zalon_vers; int error = -ENODEV; - void __iomem *zalon = ioremap(dev->hpa, 4096); + void __iomem *zalon = ioremap(dev->hpa.start, 4096); void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET; static int unit = 0; struct Scsi_Host *host; @@ -127,7 +127,7 @@ zalon_probe(struct parisc_device *dev) device.chip = zalon720_chip; device.host_id = 7; device.dev = &dev->dev; - device.slot.base = dev->hpa + GSC_SCSI_ZALON_OFFSET; + device.slot.base = dev->hpa.start + GSC_SCSI_ZALON_OFFSET; device.slot.base_v = io_port; device.slot.irq = dev->irq; device.differential = 2; diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 431aa5761a7..8b4947933d9 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -29,7 +29,6 @@ static int __init serial_init_chip(struct parisc_device *dev) { - static int serial_line_nr; struct uart_port port; unsigned long address; int err; @@ -42,12 +41,13 @@ serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) { printk(KERN_INFO "Serial: device 0x%lx not configured.\n" - "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa); + "Enable support for Wax, Lasi, Asp or Dino.\n", + dev->hpa.start); } return -ENODEV; } - address = dev->hpa; + address = dev->hpa.start; if (dev->id.sversion != 0x8d) { address += 0x800; } diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 18906460770..660bae5ba17 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -27,6 +27,7 @@ #include <linux/delay.h> /* for udelay */ #include <linux/device.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/parisc-device.h> #ifdef CONFIG_MAGIC_SYSRQ @@ -444,7 +445,7 @@ static int __init mux_probe(struct parisc_device *dev) unsigned long bytecnt; struct uart_port *port; - status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32); + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); if(status != PDC_OK) { printk(KERN_ERR "Serial mux: Unable to read IODC.\n"); return 1; @@ -469,16 +470,18 @@ static int __init mux_probe(struct parisc_device *dev) for(i = 0; i < ports; ++i, ++port_cnt) { port = &mux_ports[port_cnt]; port->iobase = 0; - port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET); + port->mapbase = dev->hpa.start + MUX_OFFSET + + (i * MUX_LINE_OFFSET); port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); port->iotype = SERIAL_IO_MEM; port->type = PORT_MUX; - port->irq = SERIAL_IRQ_NONE; + port->irq = NO_IRQ; port->uartclk = 0; port->fifosize = MUX_FIFO_SIZE; port->ops = &mux_pops; port->flags = UPF_BOOT_AUTOCONF; port->line = port_cnt; + spin_lock_init(&port->lock); status = uart_add_one_port(&mux_driver, port); BUG_ON(status); } @@ -497,7 +500,7 @@ static struct parisc_device_id mux_tbl[] = { MODULE_DEVICE_TABLE(parisc, mux_tbl); static struct parisc_driver serial_mux_driver = { - .name = "Serial MUX", + .name = "serial_mux", .id_table = mux_tbl, .probe = mux_probe, }; diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index eb83a7874c7..7e731691e2a 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -110,7 +110,7 @@ config STI_CONSOLE config FONTS bool "Select compiled-in fonts" - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE help Say Y here if you would like to use fonts other than the default your frame buffer console usually use. @@ -123,7 +123,7 @@ config FONTS config FONT_8x8 bool "VGA 8x8 font" if FONTS - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one @@ -137,7 +137,7 @@ config FONT_8x8 config FONT_8x16 bool "VGA 8x16 font" if FONTS - depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON + depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one @@ -147,7 +147,7 @@ config FONT_8x16 config FONT_6x11 bool "Mac console 6x11 font (not supported by all drivers)" if FONTS - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS && MAC help Small console font with Macintosh-style high-half glyphs. Some Mac diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index d940f605acb..a7bcd17112c 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -511,12 +511,12 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) struct sti_cooked_font *cooked_font; if (!fbfont_name || !strlen(fbfont_name)) - return NULL; + return NULL; fbfont = find_font(fbfont_name); if (!fbfont) - fbfont = get_default_font(1024,768); + fbfont = get_default_font(1024,768); if (!fbfont) - return NULL; + return NULL; DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n", fbfont->width, fbfont->height, fbfont->name)); @@ -527,7 +527,7 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) nf = kmalloc(size, GFP_KERNEL); if (!nf) - return NULL; + return NULL; memset(nf, 0, size); nf->first_char = 0; @@ -546,8 +546,8 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL); if (!cooked_font) { - kfree(nf); - return NULL; + kfree(nf); + return NULL; } cooked_font->raw = nf; @@ -595,7 +595,7 @@ sti_select_font(struct sti_cooked_rom *rom, static void __init sti_dump_rom(struct sti_rom *rom) { - printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", + printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", rom->graphics_id[0], rom->graphics_id[1], rom->revno[0] >> 4, @@ -651,15 +651,16 @@ sti_search_font(struct sti_cooked_rom *rom, int height, int width) struct sti_cooked_font *font; int i = 0; - for(font = rom->font_start; font; font = font->next_font, i++) { - if((font->raw->width == width) && (font->raw->height == height)) + for (font = rom->font_start; font; font = font->next_font, i++) { + if ((font->raw->width == width) && + (font->raw->height == height)) return i; } return 0; } -#define BMODE_RELOCATE(offset) offset = (offset) / 4; -#define BMODE_LAST_ADDR_OFFS 0x50 +#define BMODE_RELOCATE(offset) offset = (offset) / 4; +#define BMODE_LAST_ADDR_OFFS 0x50 static void * __init sti_bmode_font_raw(struct sti_cooked_font *f) @@ -700,35 +701,35 @@ sti_get_bmode_rom (unsigned long address) { struct sti_rom *raw; u32 size; - struct sti_rom_font *raw_font, *font_start; - + struct sti_rom_font *raw_font, *font_start; + sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size); - - size = (size+3) / 4; + + size = (size+3) / 4; raw = kmalloc(size, GFP_KERNEL); if (raw) { - sti_bmode_rom_copy(address, size, raw); - memmove (&raw->res004, &raw->type[0], 0x3c); - raw->type[3] = raw->res004; + sti_bmode_rom_copy(address, size, raw); + memmove (&raw->res004, &raw->type[0], 0x3c); + raw->type[3] = raw->res004; - BMODE_RELOCATE (raw->region_list); - BMODE_RELOCATE (raw->font_start); + BMODE_RELOCATE (raw->region_list); + BMODE_RELOCATE (raw->font_start); - BMODE_RELOCATE (raw->init_graph); - BMODE_RELOCATE (raw->state_mgmt); - BMODE_RELOCATE (raw->font_unpmv); - BMODE_RELOCATE (raw->block_move); - BMODE_RELOCATE (raw->inq_conf); + BMODE_RELOCATE (raw->init_graph); + BMODE_RELOCATE (raw->state_mgmt); + BMODE_RELOCATE (raw->font_unpmv); + BMODE_RELOCATE (raw->block_move); + BMODE_RELOCATE (raw->inq_conf); - raw_font = ((void *)raw) + raw->font_start; - font_start = raw_font; + raw_font = ((void *)raw) + raw->font_start; + font_start = raw_font; - while (raw_font->next_font) { - BMODE_RELOCATE (raw_font->next_font); - raw_font = ((void *)font_start) + raw_font->next_font; - } + while (raw_font->next_font) { + BMODE_RELOCATE (raw_font->next_font); + raw_font = ((void *)font_start) + raw_font->next_font; + } } - return raw; + return raw; } struct sti_rom * __init @@ -736,15 +737,15 @@ sti_get_wmode_rom (unsigned long address) { struct sti_rom *raw; unsigned long size; - + /* read the ROM size directly from the struct in ROM */ size = gsc_readl(address + offsetof(struct sti_rom,last_addr)); raw = kmalloc(size, GFP_KERNEL); - if(raw) - sti_rom_copy(address, size, raw); + if (raw) + sti_rom_copy(address, size, raw); - return raw; + return raw; } int __init @@ -757,14 +758,14 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address) if (!cooked) goto out_err; - if (wordmode) - raw = sti_get_wmode_rom (address); - else - raw = sti_get_bmode_rom (address); + if (wordmode) + raw = sti_get_wmode_rom (address); + else + raw = sti_get_bmode_rom (address); + + if (!raw) + goto out_err; - if (!raw) - goto out_err; - if (!sti_cook_fonts(cooked, raw)) { printk(KERN_ERR "No font found for STI at %08lx\n", address); goto out_err; @@ -787,7 +788,7 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address) sti->font_width = sti->font->raw->width; sti->font_height = sti->font->raw->height; if (!wordmode) - sti->font->raw = sti_bmode_font_raw(sti->font); + sti->font->raw = sti_bmode_font_raw(sti->font); sti->sti_mem_request = raw->sti_mem_req; sti->graphics_id[0] = raw->graphics_id[0]; @@ -811,16 +812,16 @@ sti_try_rom_generic(unsigned long address, unsigned long hpa, struct pci_dev *pd u32 sig; if (num_sti_roms >= MAX_STI_ROMS) { - printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); - return NULL; + printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); + return NULL; } sti = kmalloc(sizeof(*sti), GFP_KERNEL); if (!sti) { - printk(KERN_ERR "Not enough memory !\n"); - return NULL; + printk(KERN_ERR "Not enough memory !\n"); + return NULL; } - + memset(sti, 0, sizeof(*sti)); spin_lock_init(&sti->lock); @@ -932,28 +933,21 @@ static void __init sticore_check_for_default_sti(struct sti_struct *sti, char *p */ static int __init sticore_pa_init(struct parisc_device *dev) { - unsigned long rom = 0; char pa_path[21]; struct sti_struct *sti = NULL; - - if(dev->num_addrs) { - rom = dev->addr[0]; - } - if (!rom) { - rom = dev->hpa; - DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa)); - sti = sti_try_rom_generic(rom, dev->hpa, NULL); - rom = PAGE0->proc_sti; - } - if (!sti) { - DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa)); - sti = sti_try_rom_generic(rom, dev->hpa, NULL); - } + int hpa = dev->hpa.start; + + if (dev->num_addrs && dev->addr[0]) + sti = sti_try_rom_generic(dev->addr[0], hpa, NULL); + if (!sti) + sti = sti_try_rom_generic(hpa, hpa, NULL); + if (!sti) + sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL); if (!sti) return 1; - + print_pa_hwpath(dev, pa_path); - sticore_check_for_default_sti (sti, pa_path); + sticore_check_for_default_sti(sti, pa_path); return 0; } diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h index 30b023411fe..3ce3440d1b0 100644 --- a/include/asm-parisc/assembly.h +++ b/include/asm-parisc/assembly.h @@ -21,7 +21,9 @@ #ifndef _PARISC_ASSEMBLY_H #define _PARISC_ASSEMBLY_H -#ifdef __LP64__ +#define CALLEE_FLOAT_FRAME_SIZE 80 + +#ifdef CONFIG_64BIT #define LDREG ldd #define STREG std #define LDREGX ldd,s @@ -30,8 +32,8 @@ #define SHRREG shrd #define RP_OFFSET 16 #define FRAME_SIZE 128 -#define CALLEE_SAVE_FRAME_SIZE 144 -#else +#define CALLEE_REG_FRAME_SIZE 144 +#else /* CONFIG_64BIT */ #define LDREG ldw #define STREG stw #define LDREGX ldwx,s @@ -40,9 +42,11 @@ #define SHRREG shr #define RP_OFFSET 20 #define FRAME_SIZE 64 -#define CALLEE_SAVE_FRAME_SIZE 128 +#define CALLEE_REG_FRAME_SIZE 128 #endif +#define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE) + #ifdef CONFIG_PA20 #define BL b,l # ifdef CONFIG_64BIT @@ -300,9 +304,35 @@ fldd,mb -8(\regs), %fr0 .endm + .macro callee_save_float + fstd,ma %fr12, 8(%r30) + fstd,ma %fr13, 8(%r30) + fstd,ma %fr14, 8(%r30) + fstd,ma %fr15, 8(%r30) + fstd,ma %fr16, 8(%r30) + fstd,ma %fr17, 8(%r30) + fstd,ma %fr18, 8(%r30) + fstd,ma %fr19, 8(%r30) + fstd,ma %fr20, 8(%r30) + fstd,ma %fr21, 8(%r30) + .endm + + .macro callee_rest_float + fldd,mb -8(%r30), %fr21 + fldd,mb -8(%r30), %fr20 + fldd,mb -8(%r30), %fr19 + fldd,mb -8(%r30), %fr18 + fldd,mb -8(%r30), %fr17 + fldd,mb -8(%r30), %fr16 + fldd,mb -8(%r30), %fr15 + fldd,mb -8(%r30), %fr14 + fldd,mb -8(%r30), %fr13 + fldd,mb -8(%r30), %fr12 + .endm + #ifdef __LP64__ .macro callee_save - std,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30) + std,ma %r3, CALLEE_REG_FRAME_SIZE(%r30) mfctl %cr27, %r3 std %r4, -136(%r30) std %r5, -128(%r30) @@ -340,13 +370,13 @@ ldd -128(%r30), %r5 ldd -136(%r30), %r4 mtctl %r3, %cr27 - ldd,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3 + ldd,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3 .endm #else /* ! __LP64__ */ .macro callee_save - stw,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30) + stw,ma %r3, CALLEE_REG_FRAME_SIZE(%r30) mfctl %cr27, %r3 stw %r4, -124(%r30) stw %r5, -120(%r30) @@ -384,7 +414,7 @@ ldw -120(%r30), %r5 ldw -124(%r30), %r4 mtctl %r3, %cr27 - ldw,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3 + ldw,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3 .endm #endif /* ! __LP64__ */ @@ -450,5 +480,30 @@ REST_CR (%cr22, PT_PSW (\regs)) .endm + + /* First step to create a "relied upon translation" + * See PA 2.0 Arch. page F-4 and F-5. + * + * The ssm was originally necessary due to a "PCxT bug". + * But someone decided it needed to be added to the architecture + * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual. + * It's been carried forward into PA 2.0 Arch as well. :^( + * + * "ssm 0,%r0" is a NOP with side effects (prefetch barrier). + * rsm/ssm prevents the ifetch unit from speculatively fetching + * instructions past this line in the code stream. + * PA 2.0 processor will single step all insn in the same QUAD (4 insn). + */ + .macro pcxt_ssm_bug + rsm PSW_SM_I,%r0 + nop /* 1 */ + nop /* 2 */ + nop /* 3 */ + nop /* 4 */ + nop /* 5 */ + nop /* 6 */ + nop /* 7 */ + .endm + #endif /* __ASSEMBLY__ */ #endif diff --git a/include/asm-parisc/bitops.h b/include/asm-parisc/bitops.h index af7db694b22..55b98c67fd8 100644 --- a/include/asm-parisc/bitops.h +++ b/include/asm-parisc/bitops.h @@ -2,7 +2,7 @@ #define _PARISC_BITOPS_H #include <linux/compiler.h> -#include <asm/spinlock.h> +#include <asm/types.h> /* for BITS_PER_LONG/SHIFT_PER_LONG */ #include <asm/byteorder.h> #include <asm/atomic.h> @@ -12,193 +12,157 @@ * to include/asm-i386/bitops.h or kerneldoc */ -#ifdef __LP64__ -# define SHIFT_PER_LONG 6 -#ifndef BITS_PER_LONG -# define BITS_PER_LONG 64 -#endif -#else -# define SHIFT_PER_LONG 5 -#ifndef BITS_PER_LONG -# define BITS_PER_LONG 32 -#endif -#endif - -#define CHOP_SHIFTCOUNT(x) ((x) & (BITS_PER_LONG - 1)) +#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1)) #define smp_mb__before_clear_bit() smp_mb() #define smp_mb__after_clear_bit() smp_mb() -static __inline__ void set_bit(int nr, volatile unsigned long * address) +/* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion + * on use of volatile and __*_bit() (set/clear/change): + * *_bit() want use of volatile. + * __*_bit() are "relaxed" and don't use spinlock or volatile. + */ + +static __inline__ void set_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); *addr |= mask; _atomic_spin_unlock_irqrestore(addr, flags); } -static __inline__ void __set_bit(int nr, volatile unsigned long * address) +static __inline__ void __set_bit(unsigned long nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - *addr |= mask; + *m |= 1UL << CHOP_SHIFTCOUNT(nr); } -static __inline__ void clear_bit(int nr, volatile unsigned long * address) +static __inline__ void clear_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr)); unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - *addr &= ~mask; + *addr &= mask; _atomic_spin_unlock_irqrestore(addr, flags); } -static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * address) +static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - *addr &= ~mask; + *m &= ~(1UL << CHOP_SHIFTCOUNT(nr)); } -static __inline__ void change_bit(int nr, volatile unsigned long * address) +static __inline__ void change_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); *addr ^= mask; _atomic_spin_unlock_irqrestore(addr, flags); } -static __inline__ void __change_bit(int nr, volatile unsigned long * address) +static __inline__ void __change_bit(unsigned long nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - *addr ^= mask; + *m ^= 1UL << CHOP_SHIFTCOUNT(nr); } -static __inline__ int test_and_set_bit(int nr, volatile unsigned long * address) +static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - oldbit = (*addr & mask) ? 1 : 0; - *addr |= mask; + oldbit = *addr; + *addr = oldbit | mask; _atomic_spin_unlock_irqrestore(addr, flags); - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * address) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; + unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - oldbit = (*addr & mask) ? 1 : 0; - *addr |= mask; + oldbit = *addr; + *addr = oldbit | mask; - return oldbit; + return (oldbit & mask) ? 1 : 0; } -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * address) +static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - oldbit = (*addr & mask) ? 1 : 0; - *addr &= ~mask; + oldbit = *addr; + *addr = oldbit & ~mask; _atomic_spin_unlock_irqrestore(addr, flags); - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long * address) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG); + unsigned long oldbit; - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - oldbit = (*addr & mask) ? 1 : 0; - *addr &= ~mask; + oldbit = *addr; + *addr = oldbit & ~mask; - return oldbit; + return (oldbit & mask) ? 1 : 0; } -static __inline__ int test_and_change_bit(int nr, volatile unsigned long * address) +static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - oldbit = (*addr & mask) ? 1 : 0; - *addr ^= mask; + oldbit = *addr; + *addr = oldbit ^ mask; _atomic_spin_unlock_irqrestore(addr, flags); - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int __test_and_change_bit(int nr, volatile unsigned long * address) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG); + unsigned long oldbit; - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - oldbit = (*addr & mask) ? 1 : 0; - *addr ^= mask; + oldbit = *addr; + *addr = oldbit ^ mask; - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int test_bit(int nr, const volatile unsigned long *address) { - unsigned long mask; - const unsigned long *addr = (const unsigned long *)address; - - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + const unsigned long *addr = (const unsigned long *)address + (nr >> SHIFT_PER_LONG); return !!(*addr & mask); } @@ -229,7 +193,7 @@ static __inline__ unsigned long __ffs(unsigned long x) unsigned long ret; __asm__( -#if BITS_PER_LONG > 32 +#ifdef __LP64__ " ldi 63,%1\n" " extrd,u,*<> %0,63,32,%%r0\n" " extrd,u,*TR %0,31,32,%0\n" /* move top 32-bits down */ @@ -304,14 +268,7 @@ static __inline__ int fls(int x) * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word */ -#define hweight64(x) \ -({ \ - unsigned long __x = (x); \ - unsigned int __w; \ - __w = generic_hweight32((unsigned int) __x); \ - __w += generic_hweight32((unsigned int) (__x>>32)); \ - __w; \ -}) +#define hweight64(x) generic_hweight64(x) #define hweight32(x) generic_hweight32(x) #define hweight16(x) generic_hweight16(x) #define hweight8(x) generic_hweight8(x) @@ -324,7 +281,13 @@ static __inline__ int fls(int x) */ static inline int sched_find_first_bit(const unsigned long *b) { -#ifndef __LP64__ +#ifdef __LP64__ + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 64; + return __ffs(b[2]) + 128; +#else if (unlikely(b[0])) return __ffs(b[0]); if (unlikely(b[1])) @@ -334,14 +297,6 @@ static inline int sched_find_first_bit(const unsigned long *b) if (b[3]) return __ffs(b[3]) + 96; return __ffs(b[4]) + 128; -#else - if (unlikely(b[0])) - return __ffs(b[0]); - if (unlikely(((unsigned int)b[1]))) - return __ffs(b[1]) + 64; - if (b[1] >> 32) - return __ffs(b[1] >> 32) + 96; - return __ffs(b[2]) + 128; #endif } @@ -391,7 +346,7 @@ found_middle: static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); + const unsigned long *p = addr + (offset >> SHIFT_PER_LONG); unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; @@ -445,71 +400,90 @@ found_middle: * test_and_{set,clear}_bit guarantee atomicity without * disabling interrupts. */ -#ifdef __LP64__ -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr) -#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr) -#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr) -#else -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr) -#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr) -#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr) -#endif -#endif /* __KERNEL__ */ +/* '3' is bits per byte */ +#define LE_BYTE_ADDR ((sizeof(unsigned long) - 1) << 3) -static __inline__ int ext2_test_bit(int nr, __const__ void * addr) -{ - __const__ unsigned char *ADDR = (__const__ unsigned char *) addr; +#define ext2_test_bit(nr, addr) \ + test_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) +#define ext2_set_bit(nr, addr) \ + __test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) - return (ADDR[nr >> 3] >> (nr & 7)) & 1; -} +#define ext2_set_bit_atomic(l,nr,addr) \ + test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) +#define ext2_clear_bit_atomic(l,nr,addr) \ + test_and_clear_bit( (nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) + +#endif /* __KERNEL__ */ -/* - * This implementation of ext2_find_{first,next}_zero_bit was stolen from - * Linus' asm-alpha/bitops.h and modified for a big-endian machine. - */ #define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) + ext2_find_next_zero_bit((addr), (size), 0) -extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, - unsigned long size, unsigned long offset) +/* include/linux/byteorder does not support "unsigned long" type */ +static inline unsigned long ext2_swabp(unsigned long * x) { - unsigned int *p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; +#ifdef __LP64__ + return (unsigned long) __swab64p((u64 *) x); +#else + return (unsigned long) __swab32p((u32 *) x); +#endif +} + +/* include/linux/byteorder doesn't support "unsigned long" type */ +static inline unsigned long ext2_swab(unsigned long y) +{ +#ifdef __LP64__ + return (unsigned long) __swab64((u64) y); +#else + return (unsigned long) __swab32((u32) y); +#endif +} + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +{ + unsigned long *p = (unsigned long *) addr + (offset >> SHIFT_PER_LONG); + unsigned long result = offset & ~(BITS_PER_LONG - 1); + unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 31UL; + offset &= (BITS_PER_LONG - 1UL); if (offset) { - tmp = cpu_to_le32p(p++); - tmp |= ~0UL >> (32-offset); - if (size < 32) + tmp = ext2_swabp(p++); + tmp |= (~0UL >> (BITS_PER_LONG - offset)); + if (size < BITS_PER_LONG) goto found_first; - if (tmp != ~0U) + if (~tmp) goto found_middle; - size -= 32; - result += 32; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size >= 32) { - if ((tmp = cpu_to_le32p(p++)) != ~0U) - goto found_middle; - result += 32; - size -= 32; + + while (size & ~(BITS_PER_LONG - 1)) { + if (~(tmp = *(p++))) + goto found_middle_swap; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; - tmp = cpu_to_le32p(p); + tmp = ext2_swabp(p); found_first: - tmp |= ~0U << size; + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ + return result + size; /* Nope. Skip ffz */ found_middle: return result + ffz(tmp); + +found_middle_swap: + return result + ffz(ext2_swab(tmp)); } + /* Bitmap functions for the minix filesystem. */ #define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr) #define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr)) diff --git a/include/asm-parisc/errno.h b/include/asm-parisc/errno.h index 08464c40547..e2f3ddc796b 100644 --- a/include/asm-parisc/errno.h +++ b/include/asm-parisc/errno.h @@ -114,6 +114,7 @@ #define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */ #define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ +#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ /* for robust mutexes */ #define EOWNERDEAD 254 /* Owner died */ diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h index d3cfc0168fb..6a910311b56 100644 --- a/include/asm-parisc/grfioctl.h +++ b/include/asm-parisc/grfioctl.h @@ -69,6 +69,8 @@ #define CRT_ID_TVRX S9000_ID_98765 /* TVRX (gto/falcon) */ #define CRT_ID_ARTIST S9000_ID_ARTIST /* Artist */ #define CRT_ID_SUMMIT 0x2FC1066B /* Summit FX2, FX4, FX6 ... */ +#define CRT_ID_LEGO 0x35ACDA30 /* Lego FX5, FX10 ... */ +#define CRT_ID_PINNACLE 0x35ACDA16 /* Pinnacle FXe */ /* structure for ioctl(GCDESCRIBE) */ diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h index 1ac8ab6c580..efadfd543ec 100644 --- a/include/asm-parisc/led.h +++ b/include/asm-parisc/led.h @@ -23,9 +23,6 @@ #define LED_CMD_REG_NONE 0 /* NULL == no addr for the cmd register */ -/* led tasklet struct */ -extern struct tasklet_struct led_tasklet; - /* register_led_driver() */ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg); diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h index ef69ab4b17a..1d247e32a60 100644 --- a/include/asm-parisc/parisc-device.h +++ b/include/asm-parisc/parisc-device.h @@ -1,7 +1,7 @@ #include <linux/device.h> struct parisc_device { - unsigned long hpa; /* Hard Physical Address */ + struct resource hpa; /* Hard Physical Address */ struct parisc_device_id id; struct parisc_driver *driver; /* Driver for this device */ char name[80]; /* The hardware description */ @@ -39,6 +39,11 @@ struct parisc_driver { #define to_parisc_driver(d) container_of(d, struct parisc_driver, drv) #define parisc_parent(d) to_parisc_device(d->dev.parent) +static inline char *parisc_pathname(struct parisc_device *d) +{ + return d->dev.bus_id; +} + static inline void parisc_set_drvdata(struct parisc_device *d, void *p) { diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h index d0b761f690b..fa39d07d49e 100644 --- a/include/asm-parisc/pci.h +++ b/include/asm-parisc/pci.h @@ -69,7 +69,7 @@ struct pci_hba_data { #define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS) #define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1)) -#if CONFIG_64BIT +#ifdef CONFIG_64BIT #define PCI_F_EXTEND 0xffffffff00000000UL #define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a) diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h index 820c6e712cd..c28fb6f48c6 100644 --- a/include/asm-parisc/pgtable.h +++ b/include/asm-parisc/pgtable.h @@ -501,6 +501,8 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE) + #define MK_IOSPACE_PFN(space, pfn) (pfn) #define GET_IOSPACE(pfn) 0 #define GET_PFN(pfn) (pfn) diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h index a9dfadd0565..aae40e8c3aa 100644 --- a/include/asm-parisc/processor.h +++ b/include/asm-parisc/processor.h @@ -122,8 +122,27 @@ struct thread_struct { }; /* Thread struct flags. */ +#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */ +#define PARISC_UAC_SIGBUS (1UL << 1) #define PARISC_KERNEL_DEATH (1UL << 31) /* see die_if_kernel()... */ +#define PARISC_UAC_SHIFT 0 +#define PARISC_UAC_MASK (PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS) + +#define SET_UNALIGN_CTL(task,value) \ + ({ \ + (task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \ + | (((value) << PARISC_UAC_SHIFT) & \ + PARISC_UAC_MASK)); \ + 0; \ + }) + +#define GET_UNALIGN_CTL(task,addr) \ + ({ \ + put_user(((task)->thread.flags & PARISC_UAC_MASK) \ + >> PARISC_UAC_SHIFT, (int __user *) (addr)); \ + }) + #define INIT_THREAD { \ regs: { gr: { 0, }, \ fr: { 0, }, \ diff --git a/include/asm-parisc/psw.h b/include/asm-parisc/psw.h index 51323029f37..4334d6ca2ad 100644 --- a/include/asm-parisc/psw.h +++ b/include/asm-parisc/psw.h @@ -1,4 +1,7 @@ #ifndef _PARISC_PSW_H + +#include <linux/config.h> + #define PSW_I 0x00000001 #define PSW_D 0x00000002 #define PSW_P 0x00000004 @@ -9,6 +12,16 @@ #define PSW_G 0x00000040 /* PA1.x only */ #define PSW_O 0x00000080 /* PA2.0 only */ +/* ssm/rsm instructions number PSW_W and PSW_E differently */ +#define PSW_SM_I PSW_I /* Enable External Interrupts */ +#define PSW_SM_D PSW_D +#define PSW_SM_P PSW_P +#define PSW_SM_Q PSW_Q /* Enable Interrupt State Collection */ +#define PSW_SM_R PSW_R /* Enable Recover Counter Trap */ +#define PSW_SM_W 0x200 /* PA2.0 only : Enable Wide Mode */ + +#define PSW_SM_QUIET PSW_SM_R+PSW_SM_Q+PSW_SM_P+PSW_SM_D+PSW_SM_I + #define PSW_CB 0x0000ff00 #define PSW_M 0x00010000 @@ -30,33 +43,21 @@ #define PSW_Z 0x40000000 /* PA1.x only */ #define PSW_Y 0x80000000 /* PA1.x only */ -#ifdef __LP64__ -#define PSW_HI_CB 0x000000ff /* PA2.0 only */ +#ifdef CONFIG_64BIT +# define PSW_HI_CB 0x000000ff /* PA2.0 only */ #endif -/* PSW bits to be used with ssm/rsm */ -#define PSW_SM_I 0x1 -#define PSW_SM_D 0x2 -#define PSW_SM_P 0x4 -#define PSW_SM_Q 0x8 -#define PSW_SM_R 0x10 -#define PSW_SM_F 0x20 -#define PSW_SM_G 0x40 -#define PSW_SM_O 0x80 -#define PSW_SM_E 0x100 -#define PSW_SM_W 0x200 - -#ifdef __LP64__ -# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I) -# define KERNEL_PSW (PSW_W | PSW_C | PSW_Q | PSW_P | PSW_D) -# define REAL_MODE_PSW (PSW_W | PSW_Q) -# define USER_PSW_MASK (PSW_W | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB) -# define USER_PSW_HI_MASK (PSW_HI_CB) -#else -# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I) -# define KERNEL_PSW (PSW_C | PSW_Q | PSW_P | PSW_D) -# define REAL_MODE_PSW (PSW_Q) -# define USER_PSW_MASK (PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB) +#ifdef CONFIG_64BIT +# define USER_PSW_HI_MASK PSW_HI_CB +# define WIDE_PSW PSW_W +#else +# define WIDE_PSW 0 #endif +/* Used when setting up for rfi */ +#define KERNEL_PSW (WIDE_PSW | PSW_C | PSW_Q | PSW_P | PSW_D) +#define REAL_MODE_PSW (WIDE_PSW | PSW_Q) +#define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB) +#define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I) + #endif diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h index 3f428aa371a..93f990e418f 100644 --- a/include/asm-parisc/ptrace.h +++ b/include/asm-parisc/ptrace.h @@ -49,7 +49,7 @@ struct pt_regs { #define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0) #define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0) #define instruction_pointer(regs) ((regs)->iaoq[0] & ~3) -#define profile_pc(regs) instruction_pointer(regs) +unsigned long profile_pc(struct pt_regs *); extern void show_regs(struct pt_regs *); #endif diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h index 43eaa6e742e..7c3f406a746 100644 --- a/include/asm-parisc/spinlock.h +++ b/include/asm-parisc/spinlock.h @@ -5,11 +5,6 @@ #include <asm/processor.h> #include <asm/spinlock_types.h> -/* Note that PA-RISC has to use `1' to mean unlocked and `0' to mean locked - * since it only has load-and-zero. Moreover, at least on some PA processors, - * the semaphore address has to be 16-byte aligned. - */ - static inline int __raw_spin_is_locked(raw_spinlock_t *x) { volatile unsigned int *a = __ldcw_align(x); diff --git a/include/asm-parisc/spinlock_types.h b/include/asm-parisc/spinlock_types.h index 785bba822fb..d6b479bdb88 100644 --- a/include/asm-parisc/spinlock_types.h +++ b/include/asm-parisc/spinlock_types.h @@ -6,11 +6,15 @@ #endif typedef struct { +#ifdef CONFIG_PA20 + volatile unsigned int slock; +# define __RAW_SPIN_LOCK_UNLOCKED { 1 } +#else volatile unsigned int lock[4]; +# define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } } +#endif } raw_spinlock_t; -#define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } } - typedef struct { raw_spinlock_t lock; volatile int counter; diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h index 26ff844a21c..f3928d3a80c 100644 --- a/include/asm-parisc/system.h +++ b/include/asm-parisc/system.h @@ -138,13 +138,7 @@ static inline void set_eiem(unsigned long val) #define set_wmb(var, value) do { var = value; wmb(); } while (0) -/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ -#define __ldcw(a) ({ \ - unsigned __ret; \ - __asm__ __volatile__("ldcw 0(%1),%0" : "=r" (__ret) : "r" (a)); \ - __ret; \ -}) - +#ifndef CONFIG_PA20 /* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data, and GCC only guarantees 8-byte alignment for stack locals, we can't be assured of 16-byte alignment for atomic lock data even if we @@ -152,37 +146,41 @@ static inline void set_eiem(unsigned long val) we use a struct containing an array of four ints for the atomic lock type and dynamically select the 16-byte aligned int from the array for the semaphore. */ + #define __PA_LDCW_ALIGNMENT 16 #define __ldcw_align(a) ({ \ unsigned long __ret = (unsigned long) &(a)->lock[0]; \ __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) & ~(__PA_LDCW_ALIGNMENT - 1); \ (volatile unsigned int *) __ret; \ }) +#define LDCW "ldcw" -#ifdef CONFIG_SMP -# define __lock_aligned __attribute__((__section__(".data.lock_aligned"))) -#endif +#else /*CONFIG_PA20*/ +/* From: "Jim Hull" <jim.hull of hp.com> + I've attached a summary of the change, but basically, for PA 2.0, as + long as the ",CO" (coherent operation) completer is specified, then the + 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead + they only require "natural" alignment (4-byte for ldcw, 8-byte for + ldcd). */ -#define KERNEL_START (0x10100000 - 0x1000) +#define __PA_LDCW_ALIGNMENT 4 +#define __ldcw_align(a) ((volatile unsigned int *)a) +#define LDCW "ldcw,co" -/* This is for the serialisation of PxTLB broadcasts. At least on the - * N class systems, only one PxTLB inter processor broadcast can be - * active at any one time on the Merced bus. This tlb purge - * synchronisation is fairly lightweight and harmless so we activate - * it on all SMP systems not just the N class. */ -#ifdef CONFIG_SMP -extern spinlock_t pa_tlb_lock; +#endif /*!CONFIG_PA20*/ -#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) -#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) - -#else - -#define purge_tlb_start(x) do { } while(0) -#define purge_tlb_end(x) do { } while (0) +/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ +#define __ldcw(a) ({ \ + unsigned __ret; \ + __asm__ __volatile__(LDCW " 0(%1),%0" : "=r" (__ret) : "r" (a)); \ + __ret; \ +}) +#ifdef CONFIG_SMP +# define __lock_aligned __attribute__((__section__(".data.lock_aligned"))) #endif +#define KERNEL_START (0x10100000 - 0x1000) #define arch_align_stack(x) (x) #endif diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h index eb27b78930e..84af4ab1fe5 100644 --- a/include/asm-parisc/tlbflush.h +++ b/include/asm-parisc/tlbflush.h @@ -7,6 +7,26 @@ #include <linux/mm.h> #include <asm/mmu_context.h> + +/* This is for the serialisation of PxTLB broadcasts. At least on the + * N class systems, only one PxTLB inter processor broadcast can be + * active at any one time on the Merced bus. This tlb purge + * synchronisation is fairly lightweight and harmless so we activate + * it on all SMP systems not just the N class. */ +#ifdef CONFIG_SMP +extern spinlock_t pa_tlb_lock; + +#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) +#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) + +#else + +#define purge_tlb_start(x) do { } while(0) +#define purge_tlb_end(x) do { } while (0) + +#endif + + extern void flush_tlb_all(void); /* @@ -64,29 +84,26 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, { unsigned long npages; - npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - if (npages >= 512) /* XXX arbitrary, should be tuned */ + if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */ flush_tlb_all(); else { mtsp(vma->vm_mm->context,1); + purge_tlb_start(); if (split_tlb) { - purge_tlb_start(); while (npages--) { pdtlb(start); pitlb(start); start += PAGE_SIZE; } - purge_tlb_end(); } else { - purge_tlb_start(); while (npages--) { pdtlb(start); start += PAGE_SIZE; } - purge_tlb_end(); } + purge_tlb_end(); } } diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h index d21b9d0d63e..34fdce361a5 100644 --- a/include/asm-parisc/types.h +++ b/include/asm-parisc/types.h @@ -33,8 +33,10 @@ typedef unsigned long long __u64; #ifdef __LP64__ #define BITS_PER_LONG 64 +#define SHIFT_PER_LONG 6 #else #define BITS_PER_LONG 32 +#define SHIFT_PER_LONG 5 #endif #ifndef __ASSEMBLY__ diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h index 6a9f0cadff5..e7a620c5c5e 100644 --- a/include/asm-parisc/unistd.h +++ b/include/asm-parisc/unistd.h @@ -687,8 +687,8 @@ #define __NR_shmget (__NR_Linux + 194) #define __NR_shmctl (__NR_Linux + 195) -#define __NR_getpmsg (__NR_Linux + 196) /* some people actually want streams */ -#define __NR_putpmsg (__NR_Linux + 197) /* some people actually want streams */ +#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */ +#define __NR_putpmsg (__NR_Linux + 197) #define __NR_lstat64 (__NR_Linux + 198) #define __NR_truncate64 (__NR_Linux + 199) @@ -755,8 +755,14 @@ #define __NR_mbind (__NR_Linux + 260) #define __NR_get_mempolicy (__NR_Linux + 261) #define __NR_set_mempolicy (__NR_Linux + 262) +#define __NR_vserver (__NR_Linux + 263) +#define __NR_add_key (__NR_Linux + 264) +#define __NR_request_key (__NR_Linux + 265) +#define __NR_keyctl (__NR_Linux + 266) +#define __NR_ioprio_set (__NR_Linux + 267) +#define __NR_ioprio_get (__NR_Linux + 268) -#define __NR_Linux_syscalls 263 +#define __NR_Linux_syscalls 269 #define HPUX_GATEWAY_ADDR 0xC0000004 #define LINUX_GATEWAY_ADDR 0x100 @@ -807,10 +813,10 @@ #define K_INLINE_SYSCALL(name, nr, args...) ({ \ long __sys_res; \ { \ - register unsigned long __res asm("r28"); \ + register unsigned long __res __asm__("r28"); \ K_LOAD_ARGS_##nr(args) \ /* FIXME: HACK stw/ldw r19 around syscall */ \ - asm volatile( \ + __asm__ volatile( \ K_STW_ASM_PIC \ " ble 0x100(%%sr2, %%r0)\n" \ " ldi %1, %%r20\n" \ diff --git a/include/linux/hil.h b/include/linux/hil.h new file mode 100644 index 00000000000..13352d7d0ca --- /dev/null +++ b/include/linux/hil.h @@ -0,0 +1,483 @@ +#ifndef _HIL_H_ +#define _HIL_H_ + +/* + * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * A note of thanks to HP for providing and shipping reference materials + * free of charge to help in the development of HIL support for Linux. + * + */ + +#include <asm/types.h> + +/* Physical constants relevant to raw loop/device timing. + */ + +#define HIL_CLOCK 8MHZ +#define HIL_EK1_CLOCK 30HZ +#define HIL_EK2_CLOCK 60HZ + +#define HIL_TIMEOUT_DEV 5 /* ms */ +#define HIL_TIMEOUT_DEVS 10 /* ms */ +#define HIL_TIMEOUT_NORESP 10 /* ms */ +#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */ +#define HIL_TIMEOUT_SELFTEST 200 /* ms */ + + +/* Actual wire line coding. These will only be useful if someone is + * implementing a software MLC to run HIL devices on a non-parisc machine. + */ + +#define HIL_WIRE_PACKET_LEN 15 +enum hil_wire_bitpos { + HIL_WIRE_START = 0, + HIL_WIRE_ADDR2, + HIL_WIRE_ADDR1, + HIL_WIRE_ADDR0, + HIL_WIRE_COMMAND, + HIL_WIRE_DATA7, + HIL_WIRE_DATA6, + HIL_WIRE_DATA5, + HIL_WIRE_DATA4, + HIL_WIRE_DATA3, + HIL_WIRE_DATA2, + HIL_WIRE_DATA1, + HIL_WIRE_DATA0, + HIL_WIRE_PARITY, + HIL_WIRE_STOP +}; + +/* HP documentation uses these bit positions to refer to commands; + * we will call these "packets". + */ +enum hil_pkt_bitpos { + HIL_PKT_CMD = 0x00000800, + HIL_PKT_ADDR2 = 0x00000400, + HIL_PKT_ADDR1 = 0x00000200, + HIL_PKT_ADDR0 = 0x00000100, + HIL_PKT_ADDR_MASK = 0x00000700, + HIL_PKT_ADDR_SHIFT = 8, + HIL_PKT_DATA7 = 0x00000080, + HIL_PKT_DATA6 = 0x00000040, + HIL_PKT_DATA5 = 0x00000020, + HIL_PKT_DATA4 = 0x00000010, + HIL_PKT_DATA3 = 0x00000008, + HIL_PKT_DATA2 = 0x00000004, + HIL_PKT_DATA1 = 0x00000002, + HIL_PKT_DATA0 = 0x00000001, + HIL_PKT_DATA_MASK = 0x000000FF, + HIL_PKT_DATA_SHIFT = 0 +}; + +/* The HIL MLC also has several error/status/control bits. We extend the + * "packet" to include these when direct access to the MLC is available, + * or emulate them in cases where they are not available. + * + * This way the device driver knows that the underlying MLC driver + * has had to deal with loop errors. + */ +enum hil_error_bitpos { + HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll, + or we have filled up the output + buffer and must wait. */ + HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */ + HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */ + HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */ + HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */ + HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */ + HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */ +}; + +enum hil_control_bitpos { + HIL_CTRL_TEST = 0x00010000, + HIL_CTRL_IPF = 0x00040000, + HIL_CTRL_APE = 0x02000000 +}; + +/* Bits 30,31 are unused, we use them to control write behavior. */ +#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control + before writing LSW to loop */ +#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */ + +/* This gives us a 32-bit "packet" + */ +typedef u32 hil_packet; + + +/* HIL Loop commands + */ +enum hil_command { + HIL_CMD_IFC = 0x00, /* Interface Clear */ + HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */ + HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */ + HIL_CMD_IDD = 0x03, /* Identify and Describe */ + HIL_CMD_DSR = 0x04, /* Device Soft Reset */ + HIL_CMD_PST = 0x05, /* Perform Self Test */ + HIL_CMD_RRG = 0x06, /* Read Register */ + HIL_CMD_WRG = 0x07, /* Write Register */ + HIL_CMD_ACF = 0x08, /* Auto Configure */ + HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */ + HIL_CMD_POL = 0x10, /* Poll */ + HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */ + HIL_CMD_RPL = 0x20, /* RePoll */ + HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */ + HIL_CMD_RNM = 0x30, /* Report Name */ + HIL_CMD_RST = 0x31, /* Report Status */ + HIL_CMD_EXD = 0x32, /* Extended Describe */ + HIL_CMD_RSC = 0x33, /* Report Security Code */ + + /* 0x34 to 0x3c reserved for future use */ + + HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */ + HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */ + HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */ + HIL_CMD_PR1 = 0x40, /* Prompt1 */ + HIL_CMD_PR2 = 0x41, /* Prompt2 */ + HIL_CMD_PR3 = 0x42, /* Prompt3 */ + HIL_CMD_PR4 = 0x43, /* Prompt4 */ + HIL_CMD_PR5 = 0x44, /* Prompt5 */ + HIL_CMD_PR6 = 0x45, /* Prompt6 */ + HIL_CMD_PR7 = 0x46, /* Prompt7 */ + HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ + HIL_CMD_AK1 = 0x48, /* Acknowlege1 */ + HIL_CMD_AK2 = 0x49, /* Acknowlege2 */ + HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */ + HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */ + HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */ + HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */ + HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */ + HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */ + + /* 0x50 to 0x78 reserved for future use */ + /* 0x80 to 0xEF device-specific commands */ + /* 0xf0 to 0xf9 reserved for future use */ + + HIL_CMD_RIO = 0xfa, /* Register I/O Error */ + HIL_CMD_SHR = 0xfb, /* System Hard Reset */ + HIL_CMD_TER = 0xfc, /* Transmission Error */ + HIL_CMD_CAE = 0xfd, /* Configuration Address Error */ + HIL_CMD_DHR = 0xfe, /* Device Hard Reset */ + + /* 0xff is prohibited from use. */ +}; + + +/* + * Response "records" to HIL commands + */ + +/* Device ID byte + */ +#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */ +#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */ +#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */ +#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */ +#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */ +#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */ +#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */ +#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD1 0x98 +#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */ +#define HIL_IDD_DID_ABS_TABLET 0x90 +#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */ +#define HIL_IDD_DID_ABS_TSCREEN 0x8c +#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD2 0x88 +#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD3 0x80 +#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */ +#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_REL_RSVD1 0x70 +#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_REL_RSVD2 0x6c +#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */ +#define HIL_IDD_DID_REL_MOUSE 0x68 +#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */ +#define HIL_IDD_DID_REL_QUAD 0x60 +#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */ +#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */ +#define HIL_IDD_DID_CHAR_BARCODE 0x5c +#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD1 0x58 +#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD2 0x50 +#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD3 0x40 +#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */ +#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD1 0x30 +#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */ +#define HIL_IDD_DID_OTHER_BARCODE 0x2c +#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD2 0x28 +#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD3 0x20 +#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */ + +/* IDD record header + */ +#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */ +#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */ +#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */ +#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */ +#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */ +#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */ +#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */ + +/* I/O Descriptor + */ +#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */ +#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */ +#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */ +#define HIL_IDD_IOD_PROMPT_SHIFT 4 +#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */ + +#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \ +((header_packet) & HIL_IDD_HEADER_AXSET_MASK) + +#define HIL_IDD_NUM_AXSETS(header_packet) \ +(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS)) + +#define HIL_IDD_LEN(header_packet) \ +((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \ + 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \ + 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \ + !!((header_packet) & HIL_IDD_HEADER_ABS)) + +/* The following HIL_IDD_* macros assume you have an array of + * packets and/or unpacked 8-bit data in the order that they + * were received. + */ + +#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \ +(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \ +(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \ +* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1))) + +#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \ +((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \ + (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8))) + +#define HIL_IDD_IOD(header_ptr) \ +(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1)) + +#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT)) + +#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY)) + +#define HIL_IDD_NUM_BUTTONS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0) + +#define HIL_IDD_NUM_PROMPTS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \ + >> HIL_IDD_IOD_PROMPT_SHIFT) : 0) + +/* The response to HIL EXD commands -- the "extended describe record" */ +#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */ +#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */ +#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */ +#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */ + +#define HIL_EXD_NUM_RRG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_RRG) ? \ + (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_NUM_WWG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_WRG) ? \ + (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \ + HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_LEN(header_ptr) \ +(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_WRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \ + 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1) + +#define HIL_EXD_LOCALE(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK)) + +#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8)) + +/* Device locale codes. */ + +/* Last defined locale code. Everything above this is "Reserved", + and note that this same table applies to the Device ID Byte where + keyboards may have a nationality code which is only 5 bits. */ +#define HIL_LOCALE_MAX 0x1f + +/* Map to hopefully useful strings. I was trying to make these look + like locale.aliases strings do; maybe that isn't the right table to + emulate. In either case, I didn't have much to work on. */ +#define HIL_LOCALE_MAP \ +"", /* 0x00 Reserved */ \ +"", /* 0x01 Reserved */ \ +"", /* 0x02 Reserved */ \ +"swiss.french", /* 0x03 Swiss/French */ \ +"portuguese", /* 0x04 Portuguese */ \ +"arabic", /* 0x05 Arabic */ \ +"hebrew", /* 0x06 Hebrew */ \ +"english.canadian", /* 0x07 Canadian English */ \ +"turkish", /* 0x08 Turkish */ \ +"greek", /* 0x09 Greek */ \ +"thai", /* 0x0a Thai (Thailand) */ \ +"italian", /* 0x0b Italian */ \ +"korean", /* 0x0c Hangul (Korea) */ \ +"dutch", /* 0x0d Dutch */ \ +"swedish", /* 0x0e Swedish */ \ +"german", /* 0x0f German */ \ +"chinese", /* 0x10 Chinese-PRC */ \ +"chinese", /* 0x11 Chinese-ROC */ \ +"swiss.french", /* 0x12 Swiss/French II */ \ +"spanish", /* 0x13 Spanish */ \ +"swiss.german", /* 0x14 Swiss/German II */ \ +"flemish", /* 0x15 Belgian (Flemish) */ \ +"finnish", /* 0x16 Finnish */ \ +"english.uk", /* 0x17 United Kingdom */ \ +"french.canadian", /* 0x18 French/Canadian */ \ +"swiss.german", /* 0x19 Swiss/German */ \ +"norwegian", /* 0x1a Norwegian */ \ +"french", /* 0x1b French */ \ +"danish", /* 0x1c Danish */ \ +"japanese", /* 0x1d Katakana */ \ +"spanish", /* 0x1e Latin American/Spanish*/\ +"english.us" /* 0x1f United States */ \ + + +/* HIL keycodes */ +#define HIL_KEYCODES_SET1_TBLSIZE 128 +#define HIL_KEYCODES_SET1 \ + KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \ + KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \ + KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \ + KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \ + KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \ + KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \ + KEY_B, KEY_V, KEY_C, KEY_X, \ + KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \ + KEY_6, KEY_F10, KEY_3, KEY_F11, \ + KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \ + KEY_H, KEY_G, KEY_F, KEY_D, \ + KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \ + KEY_U, KEY_Y, KEY_T, KEY_R, \ + KEY_E, KEY_W, KEY_Q, KEY_TAB, \ + KEY_7, KEY_6, KEY_5, KEY_4, \ + KEY_3, KEY_2, KEY_1, KEY_GRAVE, \ + KEY_F13, KEY_F14, KEY_F15, KEY_F16, \ + KEY_F17, KEY_F18, KEY_F19, KEY_F20, \ + KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \ + KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \ + KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \ + KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \ + KEY_8, KEY_9, KEY_0, KEY_MINUS, \ + KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \ + KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \ + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \ + KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \ + KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \ + KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \ + KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT + + +#define HIL_KEYCODES_SET3_TBLSIZE 128 +#define HIL_KEYCODES_SET3 \ + KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \ + KEY_3, KEY_4, KEY_5, KEY_6, \ + KEY_7, KEY_8, KEY_9, KEY_0, \ + KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \ + KEY_Q, KEY_W, KEY_E, KEY_R, \ + KEY_T, KEY_Y, KEY_U, KEY_I, \ + KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \ + KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \ + KEY_D, KEY_F, KEY_G, KEY_H, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \ + KEY_Z, KEY_X, KEY_C, KEY_V, \ + KEY_B, KEY_N, KEY_M, KEY_COMMA, \ + KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \ + KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \ + KEY_F2, KEY_F3, KEY_F4, KEY_F5, \ + KEY_F6, KEY_F7, KEY_F8, KEY_F9, \ + KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \ + KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \ + KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \ + KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \ + KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \ + KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \ + KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_F1, KEY_F2, KEY_F3, KEY_F4, \ + KEY_F5, KEY_F6, KEY_F7, KEY_F8, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + + +/* Response to POL command, the "poll record header" */ + +#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */ +#define HIL_POL_CTS 0x04 /* Device ready to receive data */ +#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */ +#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */ +#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */ +#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */ +#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */ +#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */ +#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */ +#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */ +#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */ +#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */ +#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */ + + +#endif /* _HIL_H_ */ diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h new file mode 100644 index 00000000000..8df29ca48a1 --- /dev/null +++ b/include/linux/hil_mlc.h @@ -0,0 +1,168 @@ +/* + * HP Human Interface Loop Master Link Controller driver. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + */ + +#include <linux/hil.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <asm/semaphore.h> +#include <linux/serio.h> +#include <linux/list.h> + +typedef struct hil_mlc hil_mlc; + +/* The HIL has a complicated state engine. + * We define the structure of nodes in the state engine here. + */ +enum hilse_act { + /* HILSE_OUT prepares to receive input if the next node + * is an IN or EXPECT, and then sends the given packet. + */ + HILSE_OUT = 0, + + /* HILSE_CTS checks if the loop is busy. */ + HILSE_CTS, + + /* HILSE_OUT_LAST sends the given command packet to + * the last configured/running device on the loop. + */ + HILSE_OUT_LAST, + + /* HILSE_OUT_DISC sends the given command packet to + * the next device past the last configured/running one. + */ + HILSE_OUT_DISC, + + /* HILSE_FUNC runs a callback function with given arguments. + * a positive return value causes the "ugly" branch to be taken. + */ + HILSE_FUNC, + + /* HILSE_IN simply expects any non-errored packet to arrive + * within arg usecs. + */ + HILSE_IN = 0x100, + + /* HILSE_EXPECT expects a particular packet to arrive + * within arg usecs, any other packet is considered an error. + */ + HILSE_EXPECT, + + /* HILSE_EXPECT_LAST as above but dev field should be last + * discovered/operational device. + */ + HILSE_EXPECT_LAST, + + /* HILSE_EXPECT_LAST as above but dev field should be first + * undiscovered/inoperational device. + */ + HILSE_EXPECT_DISC +}; + +typedef int (hilse_func) (hil_mlc *mlc, int arg); +struct hilse_node { + enum hilse_act act; /* How to process this node */ + union { + hilse_func *func; /* Function to call if HILSE_FUNC */ + hil_packet packet; /* Packet to send or to compare */ + } object; + int arg; /* Timeout in usec or parm for func */ + int good; /* Node to jump to on success */ + int bad; /* Node to jump to on error */ + int ugly; /* Node to jump to on timeout */ +}; + +/* Methods for back-end drivers, e.g. hp_sdc_mlc */ +typedef int (hil_mlc_cts) (hil_mlc *mlc); +typedef void (hil_mlc_out) (hil_mlc *mlc); +typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout); + +struct hil_mlc_devinfo { + uint8_t idd[16]; /* Device ID Byte and Describe Record */ + uint8_t rsc[16]; /* Security Code Header and Record */ + uint8_t exd[16]; /* Extended Describe Record */ + uint8_t rnm[16]; /* Device name as returned by RNM command */ +}; + +struct hil_mlc_serio_map { + hil_mlc *mlc; + int di_revmap; + int didx; +}; + +/* How many (possibly old/detached) devices the we try to keep track of */ +#define HIL_MLC_DEVMEM 16 + +struct hil_mlc { + struct list_head list; /* hil_mlc is organized as linked list */ + + rwlock_t lock; + + void *priv; /* Data specific to a particular type of MLC */ + + int seidx; /* Current node in state engine */ + int istarted, ostarted; + + hil_mlc_cts *cts; + struct semaphore csem; /* Raised when loop idle */ + + hil_mlc_out *out; + struct semaphore osem; /* Raised when outpacket dispatched */ + hil_packet opacket; + + hil_mlc_in *in; + struct semaphore isem; /* Raised when a packet arrives */ + hil_packet ipacket[16]; + hil_packet imatch; + int icount; + struct timeval instart; + suseconds_t intimeout; + + int ddi; /* Last operational device id */ + int lcv; /* LCV to throttle loops */ + struct timeval lcv_tv; /* Time loop was started */ + + int di_map[7]; /* Maps below items to live devs */ + struct hil_mlc_devinfo di[HIL_MLC_DEVMEM]; + struct serio *serio[HIL_MLC_DEVMEM]; + struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM]; + hil_packet serio_opacket[HIL_MLC_DEVMEM]; + int serio_oidx[HIL_MLC_DEVMEM]; + struct hil_mlc_devinfo di_scratch; /* Temporary area */ + + int opercnt; + + struct tasklet_struct *tasklet; +}; + +int hil_mlc_register(hil_mlc *mlc); +int hil_mlc_unregister(hil_mlc *mlc); diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h new file mode 100644 index 00000000000..debd7151531 --- /dev/null +++ b/include/linux/hp_sdc.h @@ -0,0 +1,300 @@ +/* + * HP i8042 System Device Controller -- header + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * System Device Controller Microprocessor Firmware Theory of Operation + * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2 + * + */ + +#ifndef _LINUX_HP_SDC_H +#define _LINUX_HP_SDC_H + +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/time.h> +#include <linux/timer.h> +#if defined(__hppa__) +#include <asm/hardware.h> +#endif + + +/* No 4X status reads take longer than this (in usec). + */ +#define HP_SDC_MAX_REG_DELAY 20000 + +typedef void (hp_sdc_irqhook) (int irq, void *dev_id, + uint8_t status, uint8_t data); + +int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback); +int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback); +int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback); + +typedef struct { + int actidx; /* Start of act. Acts are atomic WRT I/O to SDC */ + int idx; /* Index within the act */ + int endidx; /* transaction is over and done if idx == endidx */ + uint8_t *seq; /* commands/data for the transaction */ + union { + hp_sdc_irqhook *irqhook; /* Callback, isr or tasklet context */ + struct semaphore *semaphore; /* Semaphore to sleep on. */ + } act; +} hp_sdc_transaction; +int hp_sdc_enqueue_transaction(hp_sdc_transaction *this); +int hp_sdc_dequeue_transaction(hp_sdc_transaction *this); + +/* The HP_SDC_ACT* values are peculiar to this driver. + * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another + * act to perform the dealloc. + */ +#define HP_SDC_ACT_PRECMD 0x01 /* Send a command first */ +#define HP_SDC_ACT_DATAREG 0x02 /* Set data registers */ +#define HP_SDC_ACT_DATAOUT 0x04 /* Send data bytes */ +#define HP_SDC_ACT_POSTCMD 0x08 /* Send command after */ +#define HP_SDC_ACT_DATAIN 0x10 /* Collect data after */ +#define HP_SDC_ACT_DURING 0x1f +#define HP_SDC_ACT_SEMAPHORE 0x20 /* Raise semaphore after */ +#define HP_SDC_ACT_CALLBACK 0x40 /* Pass data to IRQ handler */ +#define HP_SDC_ACT_DEALLOC 0x80 /* Destroy transaction after */ +#define HP_SDC_ACT_AFTER 0xe0 +#define HP_SDC_ACT_DEAD 0x60 /* Act timed out. */ + +/* Rest of the flags are straightforward representation of the SDC interface */ +#define HP_SDC_STATUS_IBF 0x02 /* Input buffer full */ + +#define HP_SDC_STATUS_IRQMASK 0xf0 /* Bits containing "level 1" irq */ +#define HP_SDC_STATUS_PERIODIC 0x10 /* Periodic 10ms timer */ +#define HP_SDC_STATUS_USERTIMER 0x20 /* "Special purpose" timer */ +#define HP_SDC_STATUS_TIMER 0x30 /* Both PERIODIC and USERTIMER */ +#define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */ +#define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */ +#define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */ +#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */ +#define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */ +#define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */ +#define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */ +#define HP_SDC_STATUS_KMOD_CUP 0x20 /* Control key is up */ + +#define HP_SDC_NMISTATUS_FHS 0x40 /* NMI is a fast handshake irq */ + +/* Internal i8042 registers (there are more, but they are not too useful). */ + +#define HP_SDC_USE 0x02 /* Resource usage (including OB bit) */ +#define HP_SDC_IM 0x04 /* Interrupt mask */ +#define HP_SDC_CFG 0x11 /* Configuration register */ +#define HP_SDC_KBLANGUAGE 0x12 /* Keyboard language */ + +#define HP_SDC_D0 0x70 /* General purpose data buffer 0 */ +#define HP_SDC_D1 0x71 /* General purpose data buffer 1 */ +#define HP_SDC_D2 0x72 /* General purpose data buffer 2 */ +#define HP_SDC_D3 0x73 /* General purpose data buffer 3 */ +#define HP_SDC_VT1 0x74 /* Timer for voice 1 */ +#define HP_SDC_VT2 0x75 /* Timer for voice 2 */ +#define HP_SDC_VT3 0x76 /* Timer for voice 3 */ +#define HP_SDC_VT4 0x77 /* Timer for voice 4 */ +#define HP_SDC_KBN 0x78 /* Which HIL devs are Nimitz */ +#define HP_SDC_KBC 0x79 /* Which HIL devs are cooked kbds */ +#define HP_SDC_LPS 0x7a /* i8042's view of HIL status */ +#define HP_SDC_LPC 0x7b /* i8042's view of HIL "control" */ +#define HP_SDC_RSV 0x7c /* Reserved "for testing" */ +#define HP_SDC_LPR 0x7d /* i8042 count of HIL reconfigs */ +#define HP_SDC_XTD 0x7e /* "Extended Configuration" register */ +#define HP_SDC_STR 0x7f /* i8042 self-test result */ + +/* Bitfields for above registers */ +#define HP_SDC_USE_LOOP 0x04 /* Command is currently on the loop. */ + +#define HP_SDC_IM_MASK 0x1f /* these bits not part of cmd/status */ +#define HP_SDC_IM_FH 0x10 /* Mask the fast handshake irq */ +#define HP_SDC_IM_PT 0x08 /* Mask the periodic timer irq */ +#define HP_SDC_IM_TIMERS 0x04 /* Mask the MT/DT/CT irq */ +#define HP_SDC_IM_RESET 0x02 /* Mask the reset key irq */ +#define HP_SDC_IM_HIL 0x01 /* Mask the HIL MLC irq */ + +#define HP_SDC_CFG_ROLLOVER 0x08 /* WTF is "N-key rollover"? */ +#define HP_SDC_CFG_KBD 0x10 /* There is a keyboard */ +#define HP_SDC_CFG_NEW 0x20 /* Supports/uses HIL MLC */ +#define HP_SDC_CFG_KBD_OLD 0x03 /* keyboard code for non-HIL */ +#define HP_SDC_CFG_KBD_NEW 0x07 /* keyboard code from HIL autoconfig */ +#define HP_SDC_CFG_REV 0x40 /* Code revision bit */ +#define HP_SDC_CFG_IDPROM 0x80 /* IDPROM present in kbd (not HIL) */ + +#define HP_SDC_LPS_NDEV 0x07 /* # devices autoconfigured on HIL */ +#define HP_SDC_LPS_ACSUCC 0x08 /* loop autoconfigured successfully */ +#define HP_SDC_LPS_ACFAIL 0x80 /* last loop autoconfigure failed */ + +#define HP_SDC_LPC_APE_IPF 0x01 /* HIL MLC APE/IPF (autopoll) set */ +#define HP_SDC_LPC_ARCONERR 0x02 /* i8042 autoreconfigs loop on err */ +#define HP_SDC_LPC_ARCQUIET 0x03 /* i8042 doesn't report autoreconfigs*/ +#define HP_SDC_LPC_COOK 0x10 /* i8042 cooks devices in _KBN */ +#define HP_SDC_LPC_RC 0x80 /* causes autoreconfig */ + +#define HP_SDC_XTD_REV 0x07 /* contains revision code */ +#define HP_SDC_XTD_REV_STRINGS(val, str) \ +switch (val) { \ + case 0x1: str = "1820-3712"; break; \ + case 0x2: str = "1820-4379"; break; \ + case 0x3: str = "1820-4784"; break; \ + default: str = "unknown"; \ +}; +#define HP_SDC_XTD_BEEPER 0x08 /* TI SN76494 beeper available */ +#define HP_SDC_XTD_BBRTC 0x20 /* OKI MSM-58321 BBRTC present */ + +#define HP_SDC_CMD_LOAD_RT 0x31 /* Load real time (from 8042) */ +#define HP_SDC_CMD_LOAD_FHS 0x36 /* Load the fast handshake timer */ +#define HP_SDC_CMD_LOAD_MT 0x38 /* Load the match timer */ +#define HP_SDC_CMD_LOAD_DT 0x3B /* Load the delay timer */ +#define HP_SDC_CMD_LOAD_CT 0x3E /* Load the cycle timer */ + +#define HP_SDC_CMD_SET_IM 0x40 /* 010xxxxx == set irq mask */ + +/* The documents provided do not explicitly state that all registers betweem + * 0x01 and 0x1f inclusive can be read by sending their register index as a + * command, but this is implied and appears to be the case. + */ +#define HP_SDC_CMD_READ_RAM 0x00 /* Load from i8042 RAM (autoinc) */ +#define HP_SDC_CMD_READ_USE 0x02 /* Undocumented! Load from usage reg */ +#define HP_SDC_CMD_READ_IM 0x04 /* Load current interrupt mask */ +#define HP_SDC_CMD_READ_KCC 0x11 /* Load primary kbd config code */ +#define HP_SDC_CMD_READ_KLC 0x12 /* Load primary kbd language code */ +#define HP_SDC_CMD_READ_T1 0x13 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T2 0x14 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T3 0x15 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T4 0x16 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T5 0x17 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_D0 0xf0 /* Load from i8042 RAM location 0x70 */ +#define HP_SDC_CMD_READ_D1 0xf1 /* Load from i8042 RAM location 0x71 */ +#define HP_SDC_CMD_READ_D2 0xf2 /* Load from i8042 RAM location 0x72 */ +#define HP_SDC_CMD_READ_D3 0xf3 /* Load from i8042 RAM location 0x73 */ +#define HP_SDC_CMD_READ_VT1 0xf4 /* Load from i8042 RAM location 0x74 */ +#define HP_SDC_CMD_READ_VT2 0xf5 /* Load from i8042 RAM location 0x75 */ +#define HP_SDC_CMD_READ_VT3 0xf6 /* Load from i8042 RAM location 0x76 */ +#define HP_SDC_CMD_READ_VT4 0xf7 /* Load from i8042 RAM location 0x77 */ +#define HP_SDC_CMD_READ_KBN 0xf8 /* Load from i8042 RAM location 0x78 */ +#define HP_SDC_CMD_READ_KBC 0xf9 /* Load from i8042 RAM location 0x79 */ +#define HP_SDC_CMD_READ_LPS 0xfa /* Load from i8042 RAM location 0x7a */ +#define HP_SDC_CMD_READ_LPC 0xfb /* Load from i8042 RAM location 0x7b */ +#define HP_SDC_CMD_READ_RSV 0xfc /* Load from i8042 RAM location 0x7c */ +#define HP_SDC_CMD_READ_LPR 0xfd /* Load from i8042 RAM location 0x7d */ +#define HP_SDC_CMD_READ_XTD 0xfe /* Load from i8042 RAM location 0x7e */ +#define HP_SDC_CMD_READ_STR 0xff /* Load from i8042 RAM location 0x7f */ + +#define HP_SDC_CMD_SET_ARD 0xA0 /* Set emulated autorepeat delay */ +#define HP_SDC_CMD_SET_ARR 0xA2 /* Set emulated autorepeat rate */ +#define HP_SDC_CMD_SET_BELL 0xA3 /* Set voice 3 params for "beep" cmd */ +#define HP_SDC_CMD_SET_RPGR 0xA6 /* Set "RPG" irq rate (doesn't work) */ +#define HP_SDC_CMD_SET_RTMS 0xAD /* Set the RTC time (milliseconds) */ +#define HP_SDC_CMD_SET_RTD 0xAF /* Set the RTC time (days) */ +#define HP_SDC_CMD_SET_FHS 0xB2 /* Set fast handshake timer */ +#define HP_SDC_CMD_SET_MT 0xB4 /* Set match timer */ +#define HP_SDC_CMD_SET_DT 0xB7 /* Set delay timer */ +#define HP_SDC_CMD_SET_CT 0xBA /* Set cycle timer */ +#define HP_SDC_CMD_SET_RAMP 0xC1 /* Reset READ_RAM autoinc counter */ +#define HP_SDC_CMD_SET_D0 0xe0 /* Load to i8042 RAM location 0x70 */ +#define HP_SDC_CMD_SET_D1 0xe1 /* Load to i8042 RAM location 0x71 */ +#define HP_SDC_CMD_SET_D2 0xe2 /* Load to i8042 RAM location 0x72 */ +#define HP_SDC_CMD_SET_D3 0xe3 /* Load to i8042 RAM location 0x73 */ +#define HP_SDC_CMD_SET_VT1 0xe4 /* Load to i8042 RAM location 0x74 */ +#define HP_SDC_CMD_SET_VT2 0xe5 /* Load to i8042 RAM location 0x75 */ +#define HP_SDC_CMD_SET_VT3 0xe6 /* Load to i8042 RAM location 0x76 */ +#define HP_SDC_CMD_SET_VT4 0xe7 /* Load to i8042 RAM location 0x77 */ +#define HP_SDC_CMD_SET_KBN 0xe8 /* Load to i8042 RAM location 0x78 */ +#define HP_SDC_CMD_SET_KBC 0xe9 /* Load to i8042 RAM location 0x79 */ +#define HP_SDC_CMD_SET_LPS 0xea /* Load to i8042 RAM location 0x7a */ +#define HP_SDC_CMD_SET_LPC 0xeb /* Load to i8042 RAM location 0x7b */ +#define HP_SDC_CMD_SET_RSV 0xec /* Load to i8042 RAM location 0x7c */ +#define HP_SDC_CMD_SET_LPR 0xed /* Load to i8042 RAM location 0x7d */ +#define HP_SDC_CMD_SET_XTD 0xee /* Load to i8042 RAM location 0x7e */ +#define HP_SDC_CMD_SET_STR 0xef /* Load to i8042 RAM location 0x7f */ + +#define HP_SDC_CMD_DO_RTCW 0xc2 /* i8042 RAM 0x70 --> RTC */ +#define HP_SDC_CMD_DO_RTCR 0xc3 /* RTC[0x70 0:3] --> irq/status/data */ +#define HP_SDC_CMD_DO_BEEP 0xc4 /* i8042 RAM 0x70-74 --> beeper,VT3 */ +#define HP_SDC_CMD_DO_HIL 0xc5 /* i8042 RAM 0x70-73 --> + HIL MLC R0,R1 i8042 HIL watchdog */ + +/* Values used to (de)mangle input/output to/from the HIL MLC */ +#define HP_SDC_DATA 0x40 /* Data from an 8042 register */ +#define HP_SDC_HIL_CMD 0x50 /* Data from HIL MLC R1/8042 */ +#define HP_SDC_HIL_R1MASK 0x0f /* Contents of HIL MLC R1 0:3 */ +#define HP_SDC_HIL_AUTO 0x10 /* Set if POL results from i8042 */ +#define HP_SDC_HIL_ISERR 0x80 /* Has meaning as in next 4 values */ +#define HP_SDC_HIL_RC_DONE 0x80 /* i8042 auto-configured loop */ +#define HP_SDC_HIL_ERR 0x81 /* HIL MLC R2 had a bit set */ +#define HP_SDC_HIL_TO 0x82 /* i8042 HIL watchdog expired */ +#define HP_SDC_HIL_RC 0x84 /* i8042 is auto-configuring loop */ +#define HP_SDC_HIL_DAT 0x60 /* Data from HIL MLC R0 */ + + +typedef struct { + rwlock_t ibf_lock; + rwlock_t lock; /* user/tasklet lock */ + rwlock_t rtq_lock; /* isr/tasklet lock */ + rwlock_t hook_lock; /* isr/user lock for handler add/del */ + + unsigned int irq, nmi; /* Our IRQ lines */ + unsigned long base_io, status_io, data_io; /* Our IO ports */ + + uint8_t im; /* Interrupt mask */ + int set_im; /* Interrupt mask needs to be set. */ + + int ibf; /* Last known status of IBF flag */ + uint8_t wi; /* current i8042 write index */ + uint8_t r7[4]; /* current i8042[0x70 - 0x74] values */ + uint8_t r11, r7e; /* Values from version/revision regs */ + + hp_sdc_irqhook *timer, *reg, *hil, *pup, *cooked; + +#define HP_SDC_QUEUE_LEN 16 + hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */ + + int rcurr, rqty; /* Current read transact in process */ + struct timeval rtv; /* Time when current read started */ + int wcurr; /* Current write transact in process */ + + int dev_err; /* carries status from registration */ +#if defined(__hppa__) + struct parisc_device *dev; +#elif defined(__mc68000__) + void *dev; +#else +#error No support for device registration on this arch yet. +#endif + + struct timer_list kicker; /* Keeps below task alive */ + struct tasklet_struct task; + +} hp_i8042_sdc; + +#endif /* _LINUX_HP_SDC_H */ diff --git a/include/linux/input.h b/include/linux/input.h index e8c296ff625..d7836311ada 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -644,6 +644,7 @@ struct input_absinfo { #define BUS_ADB 0x17 #define BUS_I2C 0x18 #define BUS_HOST 0x19 +#define BUS_GSC 0x1A /* * Values describing the status of an effect diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index f560dd8cdb9..d833349ed51 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -197,7 +197,7 @@ snd_harmony_interrupt(int irq, void *dev, struct pt_regs *regs) spin_unlock(&h->lock); if (dstatus & HARMONY_DSTATUS_PN) { - if (h->psubs) { + if (h->psubs && h->st.playing) { spin_lock(&h->lock); h->pbuf.buf += h->pbuf.count; /* PAGE_SIZE */ h->pbuf.buf %= h->pbuf.size; /* MAX_BUFS*PAGE_SIZE */ @@ -216,7 +216,7 @@ snd_harmony_interrupt(int irq, void *dev, struct pt_regs *regs) } if (dstatus & HARMONY_DSTATUS_RN) { - if (h->csubs) { + if (h->csubs && h->st.capturing) { spin_lock(&h->lock); h->cbuf.buf += h->cbuf.count; h->cbuf.buf %= h->cbuf.size; @@ -316,6 +316,7 @@ snd_harmony_playback_trigger(snd_pcm_substream_t *ss, int cmd) case SNDRV_PCM_TRIGGER_STOP: h->st.playing = 0; harmony_mute(h); + harmony_write(h, HARMONY_PNXTADD, h->sdma.addr); harmony_disable_interrupts(h); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -351,8 +352,9 @@ snd_harmony_capture_trigger(snd_pcm_substream_t *ss, int cmd) break; case SNDRV_PCM_TRIGGER_STOP: h->st.capturing = 0; - harmony_mute(h); - harmony_disable_interrupts(h); + harmony_mute(h); + harmony_write(h, HARMONY_RNXTADD, h->gdma.addr); + harmony_disable_interrupts(h); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: @@ -408,7 +410,8 @@ snd_harmony_playback_prepare(snd_pcm_substream_t *ss) h->pbuf.size = snd_pcm_lib_buffer_bytes(ss); h->pbuf.count = snd_pcm_lib_period_bytes(ss); - h->pbuf.buf = 0; + if (h->pbuf.buf >= h->pbuf.size) + h->pbuf.buf = 0; h->st.playing = 0; h->st.rate = snd_harmony_rate_bits(rt->rate); @@ -437,7 +440,8 @@ snd_harmony_capture_prepare(snd_pcm_substream_t *ss) h->cbuf.size = snd_pcm_lib_buffer_bytes(ss); h->cbuf.count = snd_pcm_lib_period_bytes(ss); - h->cbuf.buf = 0; + if (h->cbuf.buf >= h->cbuf.size) + h->cbuf.buf = 0; h->st.capturing = 0; h->st.rate = snd_harmony_rate_bits(rt->rate); @@ -712,13 +716,14 @@ snd_harmony_volume_get(snd_kcontrol_t *kc, left = (h->st.gain >> shift_left) & mask; right = (h->st.gain >> shift_right) & mask; - if (invert) { left = mask - left; right = mask - right; } + ucontrol->value.integer.value[0] = left; - ucontrol->value.integer.value[1] = right; + if (shift_left != shift_right) + ucontrol->value.integer.value[1] = right; spin_unlock_irqrestore(&h->mixer_lock, flags); @@ -738,22 +743,82 @@ snd_harmony_volume_put(snd_kcontrol_t *kc, int old_gain = h->st.gain; unsigned long flags; + spin_lock_irqsave(&h->mixer_lock, flags); + left = ucontrol->value.integer.value[0] & mask; - right = ucontrol->value.integer.value[1] & mask; - if (invert) { + if (invert) left = mask - left; - right = mask - right; + h->st.gain &= ~( (mask << shift_left ) ); + h->st.gain |= (left << shift_left); + + if (shift_left != shift_right) { + right = ucontrol->value.integer.value[1] & mask; + if (invert) + right = mask - right; + h->st.gain &= ~( (mask << shift_right) ); + h->st.gain |= (right << shift_right); } + + snd_harmony_set_new_gain(h); + + spin_unlock_irqrestore(&h->mixer_lock, flags); + + return h->st.gain != old_gain; +} + +static int +snd_harmony_captureroute_info(snd_kcontrol_t *kc, + snd_ctl_elem_info_t *uinfo) +{ + static char *texts[2] = { "Line", "Mic" }; + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int +snd_harmony_captureroute_get(snd_kcontrol_t *kc, + snd_ctl_elem_value_t *ucontrol) +{ + harmony_t *h = snd_kcontrol_chip(kc); + int value; + unsigned long flags; + + spin_lock_irqsave(&h->mixer_lock, flags); + + value = (h->st.gain >> HARMONY_GAIN_IS_SHIFT) & 1; + ucontrol->value.enumerated.item[0] = value; + + spin_unlock_irqrestore(&h->mixer_lock, flags); + + return 0; +} + +static int +snd_harmony_captureroute_put(snd_kcontrol_t *kc, + snd_ctl_elem_value_t *ucontrol) +{ + harmony_t *h = snd_kcontrol_chip(kc); + int value; + int old_gain = h->st.gain; + unsigned long flags; spin_lock_irqsave(&h->mixer_lock, flags); - h->st.gain &= ~( (mask << shift_right) | (mask << shift_left) ); - h->st.gain |= ( (left << shift_left) | (right << shift_right) ); + value = ucontrol->value.enumerated.item[0] & 1; + h->st.gain &= ~HARMONY_GAIN_IS_MASK; + h->st.gain |= value << HARMONY_GAIN_IS_SHIFT; + snd_harmony_set_new_gain(h); spin_unlock_irqrestore(&h->mixer_lock, flags); - return (old_gain - h->st.gain); + return h->st.gain != old_gain; } #define HARMONY_CONTROLS (sizeof(snd_harmony_controls)/ \ @@ -767,10 +832,25 @@ snd_harmony_volume_put(snd_kcontrol_t *kc, ((mask) << 16) | ((invert) << 24)) } static snd_kcontrol_new_t snd_harmony_controls[] = { - HARMONY_VOLUME("Playback Volume", HARMONY_GAIN_LO_SHIFT, + HARMONY_VOLUME("Master Playback Volume", HARMONY_GAIN_LO_SHIFT, HARMONY_GAIN_RO_SHIFT, HARMONY_GAIN_OUT, 1), HARMONY_VOLUME("Capture Volume", HARMONY_GAIN_LI_SHIFT, HARMONY_GAIN_RI_SHIFT, HARMONY_GAIN_IN, 0), + HARMONY_VOLUME("Monitor Volume", HARMONY_GAIN_MA_SHIFT, + HARMONY_GAIN_MA_SHIFT, HARMONY_GAIN_MA, 1), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Input Route", + .info = snd_harmony_captureroute_info, + .get = snd_harmony_captureroute_get, + .put = snd_harmony_captureroute_put + }, + HARMONY_VOLUME("Internal Speaker Switch", HARMONY_GAIN_SE_SHIFT, + HARMONY_GAIN_SE_SHIFT, 1, 0), + HARMONY_VOLUME("Line-Out Switch", HARMONY_GAIN_LE_SHIFT, + HARMONY_GAIN_LE_SHIFT, 1, 0), + HARMONY_VOLUME("Headphones Switch", HARMONY_GAIN_HE_SHIFT, + HARMONY_GAIN_HE_SHIFT, 1, 0), }; static void __init @@ -852,14 +932,14 @@ snd_harmony_create(snd_card_t *card, memset(&h->pbuf, 0, sizeof(h->pbuf)); memset(&h->cbuf, 0, sizeof(h->cbuf)); - h->hpa = padev->hpa; + h->hpa = padev->hpa.start; h->card = card; h->dev = padev; h->irq = padev->irq; - h->iobase = ioremap_nocache(padev->hpa, HARMONY_SIZE); + h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE); if (h->iobase == NULL) { printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n", - padev->hpa); + padev->hpa.start); err = -EBUSY; goto free_and_ret; } diff --git a/sound/parisc/harmony.h b/sound/parisc/harmony.h index ef77f9a577d..526c52389de 100644 --- a/sound/parisc/harmony.h +++ b/sound/parisc/harmony.h @@ -61,7 +61,7 @@ typedef struct snd_card_harmony { #define HARMONY_SIZE 64 #define BUF_SIZE PAGE_SIZE -#define MAX_BUFS 10 +#define MAX_BUFS 16 #define MAX_BUF_SIZE (MAX_BUFS * BUF_SIZE) #define PLAYBACK_BUFS MAX_BUFS @@ -101,28 +101,31 @@ typedef struct snd_card_harmony { #define HARMONY_SS_MONO 0x00000000 #define HARMONY_SS_STEREO 0x00000001 -#define HARMONY_GAIN_SILENCE 0x00F00FFF -#define HARMONY_GAIN_DEFAULT 0x0FF00000 +#define HARMONY_GAIN_SILENCE 0x01F00FFF +#define HARMONY_GAIN_DEFAULT 0x01F00FFF -#define HARMONY_GAIN_HE_SHIFT 27 +#define HARMONY_GAIN_HE_SHIFT 27 /* headphones enabled */ #define HARMONY_GAIN_HE_MASK (1 << HARMONY_GAIN_HE_SHIFT) -#define HARMONY_GAIN_LE_SHIFT 26 +#define HARMONY_GAIN_LE_SHIFT 26 /* line-out enabled */ #define HARMONY_GAIN_LE_MASK (1 << HARMONY_GAIN_LE_SHIFT) -#define HARMONY_GAIN_SE_SHIFT 25 +#define HARMONY_GAIN_SE_SHIFT 25 /* internal-speaker enabled */ #define HARMONY_GAIN_SE_MASK (1 << HARMONY_GAIN_SE_SHIFT) -#define HARMONY_GAIN_IS_SHIFT 24 +#define HARMONY_GAIN_IS_SHIFT 24 /* input select - 0 for line, 1 for mic */ #define HARMONY_GAIN_IS_MASK (1 << HARMONY_GAIN_IS_SHIFT) +/* monitor attenuation */ #define HARMONY_GAIN_MA 0x0f #define HARMONY_GAIN_MA_SHIFT 20 #define HARMONY_GAIN_MA_MASK (HARMONY_GAIN_MA << HARMONY_GAIN_MA_SHIFT) +/* input gain */ #define HARMONY_GAIN_IN 0x0f #define HARMONY_GAIN_LI_SHIFT 16 #define HARMONY_GAIN_LI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_LI_SHIFT) #define HARMONY_GAIN_RI_SHIFT 12 #define HARMONY_GAIN_RI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_RI_SHIFT) +/* output gain (master volume) */ #define HARMONY_GAIN_OUT 0x3f #define HARMONY_GAIN_LO_SHIFT 6 #define HARMONY_GAIN_LO_MASK (HARMONY_GAIN_OUT << HARMONY_GAIN_LO_SHIFT) |