diff options
222 files changed, 3465 insertions, 3963 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 8b056363344..43e89b1537d 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -134,8 +134,6 @@ dvb/ - info on Linux Digital Video Broadcast (DVB) subsystem. early-userspace/ - info about initramfs, klibc, and userspace early during boot. -ecryptfs.txt - - docs on eCryptfs: stacked cryptographic filesystem for Linux. eisa.txt - info on EISA bus support. exception.txt diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 397575880dc..a30dd4480ad 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -126,7 +126,7 @@ the reviewers time and will get your patch rejected, probably without even being read. At a minimum you should check your patches with the patch style -checker prior to submission (scripts/patchcheck.pl). You should +checker prior to submission (scripts/checkpatch.pl). You should be able to justify all violations that remain in your patch. diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 571785887a4..59db1bca702 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -32,6 +32,8 @@ directory-locking - info about the locking scheme used for directory operations. dlmfs.txt - info on the userspace interface to the OCFS2 DLM. +ecryptfs.txt + - docs on eCryptfs: stacked cryptographic filesystem for Linux. ext2.txt - info, mount options and specifications for the Ext2 filesystem. ext3.txt diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 8ccf0c1b58e..ed55238023a 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -28,11 +28,7 @@ Manish Singh <manish.singh@oracle.com> Caveats ======= Features which OCFS2 does not support yet: - - sparse files - extended attributes - - shared writable mmap - - loopback is supported, but data written will not - be cluster coherent. - quotas - cluster aware flock - cluster aware lockf @@ -57,3 +53,12 @@ nointr Do not allow signals to interrupt cluster atime_quantum=60(*) OCFS2 will not update atime unless this number of seconds has passed since the last update. Set to zero to always update atime. +data=ordered (*) All data are forced directly out to the main file + system prior to its metadata being committed to the + journal. +data=writeback Data ordering is not preserved, data may be written + into the main file system after its metadata has been + committed to the journal. +preferred_slot=0(*) During mount, try to use this filesystem slot first. If + it is in use by another node, the first empty one found + will be chosen. Invalid values will be ignored. diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt index 00b60cce222..ea5a42e8f79 100644 --- a/Documentation/networking/multiqueue.txt +++ b/Documentation/networking/multiqueue.txt @@ -58,9 +58,13 @@ software, so it's a straight round-robin qdisc. It uses the same syntax and classification priomap that sch_prio uses, so it should be intuitive to configure for people who've used sch_prio. -The PRIO qdisc naturally plugs into a multiqueue device. If PRIO has been -built with NET_SCH_PRIO_MQ, then upon load, it will make sure the number of -bands requested is equal to the number of queues on the hardware. If they +In order to utilitize the multiqueue features of the qdiscs, the network +device layer needs to enable multiple queue support. This can be done by +selecting NETDEVICES_MULTIQUEUE under Drivers. + +The PRIO qdisc naturally plugs into a multiqueue device. If +NETDEVICES_MULTIQUEUE is selected, then on qdisc load, the number of +bands requested is compared to the number of queues on the hardware. If they are equal, it sets a one-to-one mapping up between the queues and bands. If they're not equal, it will not load the qdisc. This is the same behavior for RR. Once the association is made, any skb that is classified will have @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 23 -EXTRAVERSION =-rc5 +EXTRAVERSION =-rc6 NAME = Pink Farting Weasel # *DOCUMENTATION* diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug index 554efe604a0..996d97e953b 100644 --- a/arch/h8300/Kconfig.debug +++ b/arch/h8300/Kconfig.debug @@ -59,7 +59,7 @@ config BLKDEV_RESERVE help Reserved BLKDEV area. -config CONFIG_BLKDEV_RESERVE_ADDRESS +config BLKDEV_RESERVE_ADDRESS hex 'start address' depends on BLKDEV_RESERVE help diff --git a/arch/i386/boot/pm.c b/arch/i386/boot/pm.c index 6be9ca811d1..09fb342cc62 100644 --- a/arch/i386/boot/pm.c +++ b/arch/i386/boot/pm.c @@ -122,7 +122,11 @@ static void setup_gdt(void) /* DS: data, read/write, 4 GB, base 0 */ [GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff), }; - struct gdt_ptr gdt; + /* Xen HVM incorrectly stores a pointer to the gdt_ptr, instead + of the gdt_ptr contents. Thus, make it static so it will + stay in memory, at least long enough that we switch to the + proper kernel GDT. */ + static struct gdt_ptr gdt; gdt.len = sizeof(boot_gdt)-1; gdt.ptr = (u32)&boot_gdt + (ds() << 4); diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c index 9f4ac8b02de..bd72d94e713 100644 --- a/arch/i386/kernel/alternative.c +++ b/arch/i386/kernel/alternative.c @@ -445,8 +445,6 @@ void __kprobes text_poke(void *addr, unsigned char *opcode, int len) { memcpy(addr, opcode, len); sync_core(); - /* Not strictly needed, but can speed CPU recovery up. Ignore cross cacheline - case. */ - if (cpu_has_clflush) - asm("clflush (%0) " :: "r" (addr) : "memory"); + /* Could also do a CLFLUSH here to speed up CPU recovery; but + that causes hangs on some VIA CPUs. */ } diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index d5a456d27d8..db6c25aa577 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -515,7 +515,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu) cpuid4_info[cpu] = kzalloc( sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL); - if (unlikely(cpuid4_info[cpu] == NULL)) + if (cpuid4_info[cpu] == NULL) return -ENOMEM; oldmask = current->cpus_allowed; @@ -748,6 +748,8 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) unsigned int cpu = sys_dev->id; unsigned long i; + if (cpuid4_info[cpu] == NULL) + return; for (i = 0; i < num_cache_leaves; i++) { cache_remove_shared_cpu_map(cpu, i); kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); diff --git a/arch/i386/kernel/cpu/perfctr-watchdog.c b/arch/i386/kernel/cpu/perfctr-watchdog.c index 4be488e73be..93fecd4b03d 100644 --- a/arch/i386/kernel/cpu/perfctr-watchdog.c +++ b/arch/i386/kernel/cpu/perfctr-watchdog.c @@ -263,8 +263,8 @@ static int setup_k7_watchdog(unsigned nmi_hz) unsigned int evntsel; struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - perfctr_msr = MSR_K7_PERFCTR0; - evntsel_msr = MSR_K7_EVNTSEL0; + perfctr_msr = wd_ops->perfctr; + evntsel_msr = wd_ops->evntsel; wrmsrl(perfctr_msr, 0UL); @@ -343,8 +343,8 @@ static int setup_p6_watchdog(unsigned nmi_hz) unsigned int evntsel; struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - perfctr_msr = MSR_P6_PERFCTR0; - evntsel_msr = MSR_P6_EVNTSEL0; + perfctr_msr = wd_ops->perfctr; + evntsel_msr = wd_ops->evntsel; /* KVM doesn't implement this MSR */ if (wrmsr_safe(perfctr_msr, 0, 0) < 0) @@ -569,8 +569,8 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz) (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) return 0; - perfctr_msr = MSR_ARCH_PERFMON_PERFCTR1; - evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL1; + perfctr_msr = wd_ops->perfctr; + evntsel_msr = wd_ops->evntsel; wrmsrl(perfctr_msr, 0UL); @@ -605,6 +605,16 @@ static struct wd_ops intel_arch_wd_ops = { .evntsel = MSR_ARCH_PERFMON_EVENTSEL1, }; +static struct wd_ops coreduo_wd_ops = { + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_intel_arch_watchdog, + .rearm = p6_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_ARCH_PERFMON_PERFCTR0, + .evntsel = MSR_ARCH_PERFMON_EVENTSEL0, +}; + static void probe_nmi_watchdog(void) { switch (boot_cpu_data.x86_vendor) { @@ -615,6 +625,12 @@ static void probe_nmi_watchdog(void) wd_ops = &k7_wd_ops; break; case X86_VENDOR_INTEL: + /* Work around Core Duo (Yonah) errata AE49 where perfctr1 + doesn't have a working enable bit. */ + if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) { + wd_ops = &coreduo_wd_ops; + break; + } if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { wd_ops = &intel_arch_wd_ops; break; diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 8c1c965eb2a..c7227e2180f 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -115,12 +115,12 @@ static int __init check_nmi_watchdog(void) atomic_dec(&nmi_active); } } + endflag = 1; if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); return -1; } - endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 0c8f00e69c4..7c1b92522e9 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -274,7 +274,6 @@ static void clear_singlestep(struct task_struct *child) void ptrace_disable(struct task_struct *child) { clear_singlestep(child); - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); } diff --git a/arch/i386/mach-generic/Makefile b/arch/i386/mach-generic/Makefile index 77fbc9f64fb..6914485c0d8 100644 --- a/arch/i386/mach-generic/Makefile +++ b/arch/i386/mach-generic/Makefile @@ -2,6 +2,6 @@ # Makefile for the generic architecture # -EXTRA_CFLAGS += -I../kernel +EXTRA_CFLAGS := -Iarch/i386/kernel obj-y := probe.o summit.o bigsmp.o es7000.o default.o ../mach-es7000/ diff --git a/arch/i386/mach-voyager/Makefile b/arch/i386/mach-voyager/Makefile index f24d2965131..33b74cf0dd2 100644 --- a/arch/i386/mach-voyager/Makefile +++ b/arch/i386/mach-voyager/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -EXTRA_CFLAGS += -I../kernel +EXTRA_CFLAGS := -Iarch/i386/kernel obj-y := setup.o voyager_basic.o voyager_thread.o obj-$(CONFIG_SMP) += voyager_smp.o voyager_cat.o diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c index ad8d86cc683..1c3bf95f735 100644 --- a/arch/i386/mm/highmem.c +++ b/arch/i386/mm/highmem.c @@ -34,17 +34,16 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ pagefault_disable(); - idx = type + KM_TYPE_NR*smp_processor_id(); - BUG_ON(!pte_none(*(kmap_pte-idx))); - if (!PageHighMem(page)) return page_address(page); + idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + BUG_ON(!pte_none(*(kmap_pte-idx))); set_pte(kmap_pte-idx, mk_pte(page, prot)); arch_flush_lazy_mmu_mode(); - return (void*) vaddr; + return (void *)vaddr; } void *kmap_atomic(struct page *page, enum km_type type) diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 665db063a40..8434f2323b8 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -550,6 +550,7 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH9_3: case PCI_DEVICE_ID_INTEL_ICH9_4: case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_TOLAPAI_0: r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c index 5f5193401be..10ac8c316c4 100644 --- a/arch/i386/pci/pcbios.c +++ b/arch/i386/pci/pcbios.c @@ -412,7 +412,7 @@ struct irq_routing_options { u16 segment; } __attribute__((packed)); -struct irq_routing_table * __devinit pcibios_get_irq_routing_table(void) +struct irq_routing_table * pcibios_get_irq_routing_table(void) { struct irq_routing_options opt; struct irq_routing_table *rt = NULL; diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 122444a9789..2e96f17b2f3 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -1577,7 +1577,6 @@ sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data) case PTRACE_DETACH: /* detach a process that was attached. */ - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); ret = ptrace_detach(child, data); goto out_tsk; diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 8ccf3e47bff..bd5fe76401f 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -57,9 +57,13 @@ config PLAT_MAPPI config PLAT_USRV bool "uServer" + select PLAT_HAS_INT1ICU config PLAT_M32700UT bool "M32700UT" + select PLAT_HAS_INT0ICU + select PLAT_HAS_INT1ICU + select PLAT_HAS_INT2ICU help The M3T-M32700UT is an evaluation board based on uT-Engine specification. This board has an M32700 (Chaos) evaluation chip. @@ -68,6 +72,9 @@ config PLAT_M32700UT config PLAT_OPSPUT bool "OPSPUT" + select PLAT_HAS_INT0ICU + select PLAT_HAS_INT1ICU + select PLAT_HAS_INT2ICU help The OPSPUT is an evaluation board based on uT-Engine specification. This board has a OPSP-REP chip. @@ -89,6 +96,7 @@ config PLAT_MAPPI3 config PLAT_M32104UT bool "M32104UT" + select PLAT_HAS_INT1ICU help The M3T-M32104UT is an reference board based on uT-Engine specification. This board has a M32104 chip. @@ -149,6 +157,18 @@ config ISA_DUAL_ISSUE depends on CHIP_M32700 || CHIP_OPSP default y +config PLAT_HAS_INT0ICU + bool + default n + +config PLAT_HAS_INT1ICU + bool + default n + +config PLAT_HAS_INT2ICU + bool + default n + config BUS_CLOCK int "Bus Clock [Hz] (integer)" default "70000000" if PLAT_MAPPI diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index cdf63b210c5..60e12f31265 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -36,7 +36,8 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) libs-y += arch/m32r/lib/ $(LIBGCC) core-y += arch/m32r/kernel/ \ arch/m32r/mm/ \ - arch/m32r/boot/ + arch/m32r/boot/ \ + arch/m32r/platforms/ drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/ diff --git a/arch/m32r/m32104ut/defconfig.m32104ut b/arch/m32r/configs/m32104ut_defconfig index 1f88f493a9e..9b5af6cd2e0 100644 --- a/arch/m32r/m32104ut/defconfig.m32104ut +++ b/arch/m32r/configs/m32104ut_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:22:20 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,17 +26,18 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set @@ -46,29 +50,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -117,13 +121,18 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00700000 CONFIG_IRAM_SIZE=0x00010000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -131,6 +140,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ISA=y # @@ -139,10 +149,6 @@ CONFIG_ISA=y # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # # CONFIG_BINFMT_FLAT is not set @@ -156,13 +162,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -187,10 +193,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set @@ -206,12 +208,15 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set @@ -229,6 +234,7 @@ CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # @@ -248,7 +254,6 @@ CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -257,20 +262,8 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -297,7 +290,17 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -310,28 +313,12 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# CONFIG_PARPORT=m # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y - -# -# Plug and Play support -# CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set @@ -339,29 +326,19 @@ CONFIG_PNP=y # Protocols # CONFIG_ISAPNP=y - -# -# Block devices -# +# CONFIG_PNPACPI is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -376,16 +353,17 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_IDEPNP is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -393,6 +371,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -413,6 +393,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -420,12 +402,8 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AIC7XXX_OLD is not set @@ -441,19 +419,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set @@ -470,43 +435,17 @@ CONFIG_DM_SNAPSHOT=m # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# +# CONFIG_DM_DELAY is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_NET_VENDOR_3COM=y @@ -536,28 +475,15 @@ CONFIG_NET_PCI=y # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set @@ -566,15 +492,7 @@ CONFIG_NET_PCI=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -582,6 +500,7 @@ CONFIG_NET_PCI=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -607,12 +526,19 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -657,35 +583,17 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # @@ -702,6 +610,8 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set @@ -710,11 +620,13 @@ CONFIG_I2C_ELEKTOR=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -725,21 +637,17 @@ CONFIG_I2C_ELEKTOR=m # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set CONFIG_SENSORS_ADM1031=m # CONFIG_SENSORS_ADM9240 is not set CONFIG_SENSORS_ASB100=m @@ -761,8 +669,12 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=m # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set CONFIG_SENSORS_MAX1619=m +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=m # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -770,29 +682,27 @@ CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_W83781D=m # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_PMS is not set CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m @@ -801,11 +711,9 @@ CONFIG_VIDEO_CQCAM=m # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set +# CONFIG_TUNER_TEA5761 is not set # CONFIG_VIDEO_M32R_AR is not set - -# -# Radio Adapters -# +CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set @@ -817,16 +725,20 @@ CONFIG_VIDEO_CQCAM=m # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # @@ -836,16 +748,15 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -858,50 +769,19 @@ CONFIG_DUMMY_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1000,6 +880,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1007,7 +888,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1060,6 +940,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -1072,29 +957,24 @@ CONFIG_OPROFILE=m CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m @@ -1103,9 +983,14 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m @@ -1120,21 +1005,23 @@ CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/configs/m32700ut.smp_defconfig index 13579917afe..af3b9817911 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.smp +++ b/arch/m32r/configs/m32700ut.smp_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 17:52:38 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,19 +26,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -47,17 +51,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -65,12 +70,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -123,13 +127,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y CONFIG_SMP=y # CONFIG_CHIP_M32700_TS1 is not set @@ -139,6 +149,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -147,10 +158,6 @@ CONFIG_NODES_SHIFT=1 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -164,13 +171,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -203,20 +210,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -242,7 +237,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -255,15 +260,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -278,6 +275,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -314,7 +312,6 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -337,29 +334,15 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -368,18 +351,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -395,14 +370,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -410,6 +386,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -430,6 +408,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -437,79 +417,31 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -517,15 +449,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -533,6 +457,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -549,6 +474,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -587,35 +513,14 @@ CONFIG_SERIAL_M32R_PLDSIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set CONFIG_DS1302=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -623,65 +528,76 @@ CONFIG_DS1302=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_M32R_AR=m CONFIG_VIDEO_M32R_AR_M64278=m +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set @@ -691,29 +607,25 @@ CONFIG_FB_S1D13XXX=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_M32R_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -726,35 +638,20 @@ CONFIG_LOGO_M32R_CLUT224=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# CONFIG_MMC=y CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_MMC_UNSAFE_RESUME is not set # -# LED Triggers -# - -# -# InfiniBand support +# MMC/SD Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD Host Controller Drivers # +# CONFIG_NEW_LEDS is not set # # Real Time Clock @@ -762,17 +659,9 @@ CONFIG_MMC_BLOCK=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -849,7 +738,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -872,6 +760,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -879,7 +768,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -932,6 +820,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -944,29 +837,27 @@ CONFIG_OPROFILE=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/configs/m32700ut.up_defconfig index 190f961d33e..a31823ffe29 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.up +++ b/arch/m32r/configs/m32700ut.up_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 12:07:08 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -24,18 +27,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -47,29 +51,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -122,13 +126,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -136,6 +146,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -144,10 +155,6 @@ CONFIG_NODES_SHIFT=1 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -161,13 +168,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -200,20 +207,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -239,7 +234,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -252,15 +257,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -275,6 +272,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -311,7 +309,6 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -334,29 +331,15 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -365,18 +348,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -392,14 +367,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -407,6 +383,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -427,6 +405,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -434,79 +414,31 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -514,15 +446,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -530,6 +454,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -546,6 +471,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -584,35 +510,14 @@ CONFIG_SERIAL_M32R_PLDSIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set CONFIG_DS1302=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -620,65 +525,76 @@ CONFIG_DS1302=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_M32R_AR=m CONFIG_VIDEO_M32R_AR_M64278=m +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set @@ -688,29 +604,25 @@ CONFIG_FB_S1D13XXX=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_M32R_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -723,35 +635,20 @@ CONFIG_LOGO_M32R_CLUT224=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# CONFIG_MMC=y CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_MMC_UNSAFE_RESUME is not set # -# LED Triggers -# - -# -# InfiniBand support +# MMC/SD Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD Host Controller Drivers # +# CONFIG_NEW_LEDS is not set # # Real Time Clock @@ -759,17 +656,9 @@ CONFIG_MMC_BLOCK=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -846,7 +735,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -869,6 +757,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -876,7 +765,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -929,6 +817,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -941,29 +834,27 @@ CONFIG_OPROFILE=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/mappi/defconfig.nommu b/arch/m32r/configs/mappi.nommu_defconfig index fbf6c384c9d..e3379de1f0c 100644 --- a/arch/m32r/mappi/defconfig.nommu +++ b/arch/m32r/configs/mappi.nommu_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:57:45 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:36 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -27,13 +30,14 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -45,28 +49,28 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -119,13 +123,18 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -133,6 +142,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -151,10 +161,6 @@ CONFIG_M32R_PCC=y CONFIG_PCCARD_NONSTATIC=y # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_FLAT=y @@ -170,13 +176,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -209,20 +215,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -248,7 +242,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -261,29 +265,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -292,18 +277,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -311,74 +288,26 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -386,15 +315,7 @@ CONFIG_NE2000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -402,6 +323,7 @@ CONFIG_NE2000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -418,6 +340,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -452,41 +375,20 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -494,47 +396,56 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -547,50 +458,18 @@ CONFIG_FIRMWARE_EDID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -676,6 +555,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -683,7 +563,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -736,6 +615,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -747,29 +631,27 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/mappi/defconfig.smp b/arch/m32r/configs/mappi.smp_defconfig index 168669202b9..b86fb37fc6c 100644 --- a/arch/m32r/mappi/defconfig.smp +++ b/arch/m32r/configs/mappi.smp_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:50:59 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,17 +26,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -46,17 +51,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -64,12 +70,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -122,13 +127,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y CONFIG_SMP=y CONFIG_CHIP_M32700_TS1=y @@ -138,6 +149,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -156,10 +168,6 @@ CONFIG_M32R_PCC=y CONFIG_PCCARD_NONSTATIC=y # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -173,12 +181,12 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -211,20 +219,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -250,7 +246,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -263,15 +269,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -286,6 +284,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -311,7 +310,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -333,29 +331,15 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -364,18 +348,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=m CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m @@ -391,14 +367,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -406,74 +383,26 @@ CONFIG_IDE_GENERIC=m # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -481,15 +410,7 @@ CONFIG_NE2000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -497,6 +418,7 @@ CONFIG_NE2000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -516,6 +438,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -550,41 +473,20 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -592,47 +494,56 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -645,50 +556,18 @@ CONFIG_FIRMWARE_EDID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -761,9 +640,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -794,6 +670,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -801,7 +678,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -854,6 +730,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -865,31 +746,29 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/mappi/defconfig.up b/arch/m32r/configs/mappi.up_defconfig index 5ba00603c1a..114a6c9b60e 100644 --- a/arch/m32r/mappi/defconfig.up +++ b/arch/m32r/configs/mappi.up_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:51:20 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -24,16 +27,18 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -46,29 +51,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -121,13 +126,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -135,6 +146,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -153,10 +165,6 @@ CONFIG_M32R_PCC=y CONFIG_PCCARD_NONSTATIC=y # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -170,12 +178,12 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -208,20 +216,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -247,7 +243,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -260,15 +266,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -283,6 +281,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -308,7 +307,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -330,29 +328,15 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -361,18 +345,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=m CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m @@ -388,14 +364,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -403,74 +380,26 @@ CONFIG_IDE_GENERIC=m # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -478,15 +407,7 @@ CONFIG_NE2000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -494,6 +415,7 @@ CONFIG_NE2000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -513,6 +435,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -547,41 +470,20 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -589,47 +491,56 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -642,50 +553,18 @@ CONFIG_FIRMWARE_EDID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -758,9 +637,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -791,6 +667,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -798,7 +675,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -851,6 +727,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -862,31 +743,29 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/mappi2/defconfig.opsp b/arch/m32r/configs/mappi2.opsp_defconfig index b379ae96e6a..54bb6e25d39 100644 --- a/arch/m32r/mappi2/defconfig.opsp +++ b/arch/m32r/configs/mappi2.opsp_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 19:40:30 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:36 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -24,18 +27,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -47,29 +51,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -122,13 +126,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00008000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -136,6 +146,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -153,10 +164,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_M32R_CFC is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -170,13 +177,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -209,20 +216,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -248,7 +243,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -261,29 +266,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -292,18 +278,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -320,14 +298,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -335,6 +314,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -355,6 +336,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -362,93 +345,33 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -456,15 +379,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -472,6 +387,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -488,6 +404,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -525,41 +442,20 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -567,56 +463,55 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_M32R_AR is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # @@ -624,16 +519,15 @@ CONFIG_FIRMWARE_EDID=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -646,50 +540,18 @@ CONFIG_DUMMY_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -784,6 +646,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -791,7 +654,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -844,6 +706,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -855,29 +722,27 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/mappi2/defconfig.vdec2 b/arch/m32r/configs/mappi2.vdec2_defconfig index fe5b2a63cd6..42247ae4fc5 100644 --- a/arch/m32r/mappi2/defconfig.vdec2 +++ b/arch/m32r/configs/mappi2.vdec2_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 19:31:44 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:36 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -24,18 +27,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -47,29 +51,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -120,13 +124,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00008000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -134,6 +144,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -151,10 +162,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_M32R_CFC is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -168,13 +175,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -207,20 +214,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -246,7 +241,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -259,29 +264,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -290,18 +276,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -318,14 +296,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -333,6 +312,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -353,6 +334,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -360,93 +343,33 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -454,15 +377,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -470,6 +385,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -486,6 +402,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -523,41 +440,20 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -565,56 +461,55 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_M32R_AR is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # @@ -622,16 +517,15 @@ CONFIG_FIRMWARE_EDID=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -644,50 +538,18 @@ CONFIG_DUMMY_CONSOLE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -782,6 +644,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -789,7 +652,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -842,6 +704,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -853,29 +720,27 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/mappi3/defconfig.smp b/arch/m32r/configs/mappi3.smp_defconfig index 2f352267a6d..18c564f4ea9 100644 --- a/arch/m32r/mappi3/defconfig.smp +++ b/arch/m32r/configs/mappi3.smp_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Mon Dec 11 19:57:33 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:36 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,17 +26,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -46,17 +51,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -64,12 +70,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -122,13 +127,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y CONFIG_SMP=y # CONFIG_CHIP_M32700_TS1 is not set @@ -138,6 +149,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -156,10 +168,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_M32R_CFC is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -173,12 +181,12 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -211,20 +219,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -250,7 +246,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -263,15 +269,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -286,6 +284,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -311,7 +310,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -333,29 +331,15 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -364,18 +348,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -391,14 +367,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -406,77 +383,30 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -484,15 +414,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -500,6 +422,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -519,6 +442,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -553,41 +477,20 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -595,47 +498,56 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -648,50 +560,18 @@ CONFIG_FIRMWARE_EDID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -764,9 +644,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -797,6 +674,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -804,7 +682,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -857,6 +734,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -868,31 +750,29 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/oaks32r/defconfig.nommu b/arch/m32r/configs/oaks32r_defconfig index aaa00828e0d..cc0f99a5929 100644 --- a/arch/m32r/oaks32r/defconfig.nommu +++ b/arch/m32r/configs/oaks32r_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 12:09:17 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:36 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -27,12 +30,13 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -44,28 +48,28 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set -CONFIG_SLAB=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -114,13 +118,18 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00010000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -128,6 +137,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -136,10 +146,6 @@ CONFIG_NODES_SHIFT=1 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_FLAT=y @@ -155,13 +161,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -194,20 +200,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -233,7 +227,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -246,29 +250,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -277,18 +262,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -296,69 +273,25 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -366,15 +299,7 @@ CONFIG_NE2000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -382,6 +307,7 @@ CONFIG_NE2000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -398,6 +324,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -432,34 +359,13 @@ CONFIG_SERIAL_M32R_SIO_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -467,47 +373,56 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -520,50 +435,18 @@ CONFIG_FIRMWARE_EDID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -643,6 +526,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -650,7 +534,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -703,6 +586,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -714,29 +602,27 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/opsput/defconfig.opsput b/arch/m32r/configs/opsput_defconfig index 461f95e72d1..39f5c1a5064 100644 --- a/arch/m32r/opsput/defconfig.opsput +++ b/arch/m32r/configs/opsput_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 18:34:36 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:37 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,18 +26,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -46,29 +50,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -121,13 +125,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00010000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_PREEMPT is not set # CONFIG_SMP is not set CONFIG_NODES_SHIFT=1 @@ -135,6 +145,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -154,10 +165,6 @@ CONFIG_M32R_CFC_NUM=1 CONFIG_PCCARD_NONSTATIC=y # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -171,13 +178,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -210,20 +217,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -249,7 +244,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -262,30 +267,12 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -294,18 +281,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -313,6 +292,8 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -333,6 +314,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -340,93 +323,33 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -434,15 +357,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -450,6 +365,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -466,6 +382,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -501,42 +418,21 @@ CONFIG_SERIAL_M32R_PLDSIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set CONFIG_DS1302=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -544,47 +440,56 @@ CONFIG_DS1302=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -597,50 +502,18 @@ CONFIG_FIRMWARE_EDID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set # -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# # Real Time Clock # # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -735,6 +608,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -742,7 +616,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -795,6 +668,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -806,27 +684,28 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -835,16 +714,16 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/configs/usrv_defconfig b/arch/m32r/configs/usrv_defconfig new file mode 100644 index 00000000000..62e813e30ce --- /dev/null +++ b/arch/m32r/configs/usrv_defconfig @@ -0,0 +1,774 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:37 2007 +# +CONFIG_M32R=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# Processor type and features +# +# CONFIG_PLAT_MAPPI is not set +CONFIG_PLAT_USRV=y +# CONFIG_PLAT_M32700UT is not set +# CONFIG_PLAT_OPSPUT is not set +# CONFIG_PLAT_OAKS32R is not set +# CONFIG_PLAT_MAPPI2 is not set +# CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set +CONFIG_CHIP_M32700=y +# CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set +# CONFIG_CHIP_VDEC2 is not set +# CONFIG_CHIP_OPSP is not set +CONFIG_MMU=y +CONFIG_TLB_ENTRIES=32 +CONFIG_ISA_M32R2=y +CONFIG_ISA_DSP_LEVEL2=y +CONFIG_ISA_DUAL_ISSUE=y +CONFIG_BUS_CLOCK=50000000 +CONFIG_TIMER_DIVIDE=128 +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_NOHIGHMEM=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PREEMPT is not set +CONFIG_SMP=y +# CONFIG_CHIP_M32700_TS1 is not set +CONFIG_NR_CPUS=2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_ISA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_M32R_PCC is not set +CONFIG_M32R_CFC=y +CONFIG_M32R_CFC_NUM=2 +CONFIG_PCCARD_NONSTATIC=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=y +CONFIG_IEEE80211_DEBUG=y +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=y +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_M32R_SIO is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_RTC is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig index 13579917afe..af3b9817911 100644 --- a/arch/m32r/defconfig +++ b/arch/m32r/defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 17:52:38 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,19 +26,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -47,17 +51,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -65,12 +70,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -123,13 +127,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y CONFIG_SMP=y # CONFIG_CHIP_M32700_TS1 is not set @@ -139,6 +149,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -147,10 +158,6 @@ CONFIG_NODES_SHIFT=1 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -164,13 +171,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -203,20 +210,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -242,7 +237,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -255,15 +260,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -278,6 +275,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -314,7 +312,6 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -337,29 +334,15 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -368,18 +351,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -395,14 +370,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -410,6 +386,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -430,6 +408,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -437,79 +417,31 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -517,15 +449,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -533,6 +457,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -549,6 +474,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -587,35 +513,14 @@ CONFIG_SERIAL_M32R_PLDSIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set CONFIG_DS1302=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -623,65 +528,76 @@ CONFIG_DS1302=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_M32R_AR=m CONFIG_VIDEO_M32R_AR_M64278=m +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set @@ -691,29 +607,25 @@ CONFIG_FB_S1D13XXX=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_M32R_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -726,35 +638,20 @@ CONFIG_LOGO_M32R_CLUT224=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# CONFIG_MMC=y CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_MMC_UNSAFE_RESUME is not set # -# LED Triggers -# - -# -# InfiniBand support +# MMC/SD Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD Host Controller Drivers # +# CONFIG_NEW_LEDS is not set # # Real Time Clock @@ -762,17 +659,9 @@ CONFIG_MMC_BLOCK=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -849,7 +738,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -872,6 +760,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -879,7 +768,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -932,6 +820,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -944,29 +837,27 @@ CONFIG_OPROFILE=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index 5a2fa886906..e97e26e87c9 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -8,14 +8,6 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o obj-$(CONFIG_SMP) += smp.o smpboot.o -obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o -obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o -obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o -obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o -obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o -obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o -obj-$(CONFIG_PLAT_M32104UT) += setup_m32104ut.o io_m32104ut.o EXTRA_AFLAGS := -traditional diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index a2c472c0549..d4eaa2fd181 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -109,15 +109,10 @@ #define SP(reg) @(0x68,reg) #define ORIG_R0(reg) @(0x6C,reg) -CF_MASK = 0x00000001 -TF_MASK = 0x00000100 -IF_MASK = 0x00000200 -DF_MASK = 0x00000400 -NT_MASK = 0x00004000 -VM_MASK = 0x00020000 +#define nr_syscalls ((syscall_table_size)/4) #ifdef CONFIG_PREEMPT -#define preempt_stop(x) CLI(x) +#define preempt_stop(x) DISABLE_INTERRUPTS(x) #else #define preempt_stop(x) #define resume_kernel restore_all @@ -149,7 +144,7 @@ ret_from_intr: #endif beqz r4, resume_kernel ENTRY(resume_userspace) - CLI(r4) ; make sure we don't miss an interrupt + DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret GET_THREAD_INFO(r8) @@ -173,11 +168,11 @@ need_resched: beqz r4, restore_all LDIMM (r4, PREEMPT_ACTIVE) st r4, @(TI_PRE_COUNT, r8) - STI(r4) + ENABLE_INTERRUPTS(r4) bl schedule ldi r4, #0 st r4, @(TI_PRE_COUNT, r8) - CLI(r4) + DISABLE_INTERRUPTS(r4) bra need_resched #endif @@ -185,7 +180,7 @@ need_resched: ENTRY(system_call) SWITCH_TO_KERNEL_STACK SAVE_ALL - STI(r4) ; Enable interrupt + ENABLE_INTERRUPTS(r4) ; Enable interrupt st sp, PTREGS(sp) ; implicit pt_regs parameter cmpui r7, #NR_syscalls bnc syscall_badsys @@ -203,7 +198,7 @@ syscall_call: jl r7 ; execute system call st r0, R0(sp) ; save the return value syscall_exit: - CLI(r4) ; make sure we don't miss an interrupt + DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret ld r9, @(TI_FLAGS, r8) @@ -220,7 +215,7 @@ work_pending: beqz r4, work_notifysig work_resched: bl schedule - CLI(r4) ; make sure we don't miss an interrupt + DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret ld r9, @(TI_FLAGS, r8) @@ -262,7 +257,7 @@ syscall_exit_work: ld r9, @(TI_FLAGS, r8) and3 r4, r9, #_TIF_SYSCALL_TRACE beqz r4, work_pending - STI(r4) ; could let do_syscall_trace() call + ENABLE_INTERRUPTS(r4) ; could let do_syscall_trace() call ; schedule() instead bl do_syscall_trace bra resume_userspace @@ -290,16 +285,12 @@ syscall_badsys: */ ENTRY(ei_handler) #if defined(CONFIG_CHIP_M32700) - SWITCH_TO_KERNEL_STACK ; WORKAROUND: force to clear SM bit and use the kernel stack (SPI). + SWITCH_TO_KERNEL_STACK #endif SAVE_ALL mv r1, sp ; arg1(regs) -#if defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \ - || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \ - || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) - -; GET_ICU_STATUS; + ; get ICU status seth r0, #shigh(M32R_ICU_ISTS_ADDR) ld r0, @(low(M32R_ICU_ISTS_ADDR),r0) push r0 @@ -314,10 +305,15 @@ ENTRY(ei_handler) ;; IRQ exist check #if defined(CONFIG_CHIP_M32700) /* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */ - beqz r0, 3f ; if (!irq_num) goto exit -#else + bnez r0, 0f + ld24 r14, #0x00070000 + seth r0, #shigh(M32R_ICU_IMASK_ADDR) + st r14, @(low(M32R_ICU_IMASK_ADDR),r0) + bra 1f + .fillinsn +0: +#endif /* CONFIG_CHIP_M32700 */ beqz r0, 1f ; if (!irq_num) goto exit -#endif /* WORKAROUND */ ;; IPI check cmpi r0, #(M32R_IRQ_IPI0<<2) ; ISN < IPI0 check bc 2f @@ -332,220 +328,56 @@ ENTRY(ei_handler) .fillinsn 1: addi sp, #4 - bra ret_to_intr -#if defined(CONFIG_CHIP_M32700) - /* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */ - .fillinsn -3: - ld24 r14, #0x00070000 - seth r0, #shigh(M32R_ICU_IMASK_ADDR) - st r14, @(low(M32R_ICU_IMASK_ADDR), r0) - addi sp, #4 - bra ret_to_intr -#endif /* WORKAROUND */ - ;; do_IRQ + bra restore_all .fillinsn 2: srli r0, #2 -#if defined(CONFIG_PLAT_USRV) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, 9f - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - .fillinsn -9: -#elif defined(CONFIG_PLAT_M32700UT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(M32700UT_LAN_ICUISTS) - or3 r0, r0, #low(M32700UT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(M32700UT_LCD_ICUISTS) - or3 r0, r0, #low(M32700UT_LCD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_end: -#elif defined(CONFIG_PLAT_OPSPUT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(OPSPUT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(OPSPUT_LAN_ICUISTS) - or3 r0, r0, #low(OPSPUT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(OPSPUT_LCD_ICUISTS) - or3 r0, r0, #low(OPSPUT_LCD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_end: -#endif /* CONFIG_PLAT_OPSPUT */ - bl do_IRQ ; r0(irq), r1(regs) -#else /* not CONFIG_SMP */ +#else /* not CONFIG_SMP */ srli r0, #22 ; r0(irq) -#if defined(CONFIG_PLAT_USRV) +#endif /* not CONFIG_SMP */ + +#if defined(CONFIG_PLAT_HAS_INT1ICU) add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, 1f - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 + bnez r2, 3f + seth r0, #shigh(M32R_INT1ICU_ISTS) + lduh r0, @(low(M32R_INT1ICU_ISTS),r0) ; bit10-6 : ISN slli r0, #21 srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - .fillinsn -1: -#elif defined(CONFIG_PLAT_M32700UT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(M32700UT_LAN_ICUISTS) - or3 r0, r0, #low(M32700UT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(M32700UT_LCD_ICUISTS) - or3 r0, r0, #low(M32700UT_LCD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_end: -#elif defined(CONFIG_PLAT_OPSPUT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(OPSPUT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(OPSPUT_LAN_ICUISTS) - or3 r0, r0, #low(OPSPUT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE) + addi r0, #(M32R_INT1ICU_IRQ_BASE) bra check_end .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(OPSPUT_LCD_ICUISTS) - or3 r0, r0, #low(OPSPUT_LCD_ICUISTS) - lduh r0, @r0 +3: +#endif /* CONFIG_PLAT_HAS_INT1ICU */ +#if defined(CONFIG_PLAT_HAS_INT0ICU) + add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt + bnez r2, 4f + seth r0, #shigh(M32R_INT0ICU_ISTS) + lduh r0, @(low(M32R_INT0ICU_ISTS),r0) ; bit10-6 : ISN slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE) + srli r0, #27 ; ISN + add3 r0, r0, #(M32R_INT0ICU_IRQ_BASE) bra check_end .fillinsn -check_end: -#elif defined(CONFIG_PLAT_M32104UT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_end - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 +4: +#endif /* CONFIG_PLAT_HAS_INT0ICU */ +#if defined(CONFIG_PLAT_HAS_INT2ICU) + add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt + bnez r2, 5f + seth r0, #shigh(M32R_INT2ICU_ISTS) + lduh r0, @(low(M32R_INT2ICU_ISTS),r0) ; bit10-6 : ISN slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32104UT_PLD_IRQ_BASE) - bra check_end + srli r0, #27 ; ISN + add3 r0, r0, #(M32R_INT2ICU_IRQ_BASE) + ; bra check_end .fillinsn +5: +#endif /* CONFIG_PLAT_HAS_INT2ICU */ + check_end: -#endif /* CONFIG_PLAT_M32104UT */ bl do_IRQ -#endif /* CONFIG_SMP */ pop r14 seth r0, #shigh(M32R_ICU_IMASK_ADDR) st r14, @(low(M32R_ICU_IMASK_ADDR),r0) -#else -#error no chip configuration -#endif -ret_to_intr: bra ret_from_intr /* @@ -631,7 +463,7 @@ inst: ENTRY(alignment_check) -/* void alignment_check(int error_code) */ + /* void alignment_check(int error_code) */ SWITCH_TO_KERNEL_STACK SAVE_ALL ldi r1, #0x30 ; error_code @@ -641,7 +473,7 @@ error_code: bra ret_from_exception ENTRY(rie_handler) -/* void rie_handler(int error_code) */ + /* void rie_handler(int error_code) */ SWITCH_TO_KERNEL_STACK SAVE_ALL ldi r1, #0x20 ; error_code @@ -650,7 +482,7 @@ ENTRY(rie_handler) bra error_code ENTRY(pie_handler) -/* void pie_handler(int error_code) */ + /* void pie_handler(int error_code) */ SWITCH_TO_KERNEL_STACK SAVE_ALL ldi r1, #0 ; error_code ; FIXME @@ -659,8 +491,8 @@ ENTRY(pie_handler) bra error_code ENTRY(debug_trap) - .global withdraw_debug_trap /* void debug_trap(void) */ + .global withdraw_debug_trap SWITCH_TO_KERNEL_STACK SAVE_ALL mv r0, sp ; pt_regs @@ -679,11 +511,9 @@ ENTRY(ill_trap) bl do_ill_trap bra error_code - -/* Cache flushing handler */ ENTRY(cache_flushing_handler) - .global _flush_cache_all /* void _flush_cache_all(void); */ + .global _flush_cache_all SWITCH_TO_KERNEL_STACK push r0 push r1 @@ -706,292 +536,7 @@ ENTRY(cache_flushing_handler) pop r0 rte -.data -ENTRY(sys_call_table) - .long sys_restart_syscall /* 0 - old "setup()" system call*/ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_ni_syscall /* lchown16 syscall holder */ - .long sys_ni_syscall /* old break syscall holder */ - .long sys_ni_syscall /* old stat syscall holder */ - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_ni_syscall /* setuid16 syscall holder */ - .long sys_ni_syscall /* getuid16 syscall holder */ - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_ni_syscall /* old fstat syscall holder */ - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_cachectl /* for M32R */ /* old gtty syscall holder */ - .long sys_access - .long sys_ni_syscall /* nice syscall holder */ - .long sys_ni_syscall /* 35 - old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_ni_syscall /* setgid16 syscall holder */ - .long sys_getgid /* will be unused */ - .long sys_ni_syscall /* signal syscall holder */ - .long sys_ni_syscall /* geteuid16 syscall holder */ - .long sys_ni_syscall /* 50 - getegid16 syscall holder */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 - will be unused */ - .long sys_ni_syscall /* mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_ni_syscall /* sigaction syscall holder */ - .long sys_ni_syscall /* sgetmask syscall holder */ - .long sys_ni_syscall /* ssetmask syscall holder */ - .long sys_ni_syscall /* 70 - setreuid16 syscall holder */ - .long sys_ni_syscall /* setregid16 syscall holder */ - .long sys_ni_syscall /* sigsuspend syscall holder */ - .long sys_ni_syscall /* sigpending syscall holder */ - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_getrlimit/*will be unused*/ - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_ni_syscall /* 80 - getgroups16 syscall holder */ - .long sys_ni_syscall /* setgroups16 syscall holder */ - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_ni_syscall /* old lstat syscall holder */ - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long sys_ni_syscall /* readdir syscall holder */ - .long sys_ni_syscall /* 90 - old_mmap syscall holder */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_ni_syscall /* 95 - fchwon16 syscall holder */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm syscall holder */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_ni_syscall /* old uname syscall holder */ - .long sys_ni_syscall /* 110 - iopl syscall holder */ - .long sys_vhangup - .long sys_ni_syscall /* idle syscall holder */ - .long sys_ni_syscall /* vm86old syscall holder */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_ni_syscall /* sigreturn syscall holder */ - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* modify_ldt syscall holder */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_ni_syscall /* sigprocmask syscall holder */ - .long sys_ni_syscall /* create_module syscall holder */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130 - get_kernel_syms */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* afs_syscall syscall holder */ - .long sys_ni_syscall /* setfsuid16 syscall holder */ - .long sys_ni_syscall /* setfsgid16 syscall holder */ - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_ni_syscall /* setresuid16 syscall holder */ - .long sys_ni_syscall /* 165 - getresuid16 syscall holder */ - .long sys_tas /* vm86 syscall holder */ - .long sys_ni_syscall /* query_module syscall holder */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid /* 170 */ - .long sys_getresgid - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_ni_syscall /* chown16 syscall holder */ - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall /* reserved for "set_thread_area" system call */ - .long sys_ni_syscall /* reserved for "get_thread_area" system call */ - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64 - .long sys_ni_syscall /* Reserved for sys_vserver */ - .long sys_ni_syscall /* Reserved for sys_mbind */ - .long sys_ni_syscall /* Reserved for sys_get_mempolicy */ - .long sys_ni_syscall /* Reserved for sys_set_mempolicy */ - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ - .long sys_waitid + .section .rodata,"a" +#include "syscall_table.S" syscall_table_size=(.-sys_call_table) diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S new file mode 100644 index 00000000000..751ac2a3d12 --- /dev/null +++ b/arch/m32r/kernel/syscall_table.S @@ -0,0 +1,286 @@ +ENTRY(sys_call_table) + .long sys_restart_syscall /* 0 - old "setup()" system call*/ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_ni_syscall /* lchown16 syscall holder */ + .long sys_ni_syscall /* old break syscall holder */ + .long sys_ni_syscall /* old stat syscall holder */ + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_ni_syscall /* setuid16 syscall holder */ + .long sys_ni_syscall /* getuid16 syscall holder */ + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_ni_syscall /* old fstat syscall holder */ + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_cachectl /* for M32R */ /* old gtty syscall holder */ + .long sys_access + .long sys_ni_syscall /* nice syscall holder */ + .long sys_ni_syscall /* 35 - old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_ni_syscall /* setgid16 syscall holder */ + .long sys_getgid /* will be unused */ + .long sys_ni_syscall /* signal syscall holder */ + .long sys_ni_syscall /* geteuid16 syscall holder */ + .long sys_ni_syscall /* 50 - getegid16 syscall holder */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 - will be unused */ + .long sys_ni_syscall /* mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* sys_olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_ni_syscall /* sigaction syscall holder */ + .long sys_ni_syscall /* sgetmask syscall holder */ + .long sys_ni_syscall /* ssetmask syscall holder */ + .long sys_ni_syscall /* 70 - setreuid16 syscall holder */ + .long sys_ni_syscall /* setregid16 syscall holder */ + .long sys_ni_syscall /* sigsuspend syscall holder */ + .long sys_ni_syscall /* sigpending syscall holder */ + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_getrlimit/*will be unused*/ + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_ni_syscall /* 80 - getgroups16 syscall holder */ + .long sys_ni_syscall /* setgroups16 syscall holder */ + .long sys_ni_syscall /* sys_oldselect */ + .long sys_symlink + .long sys_ni_syscall /* old lstat syscall holder */ + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long sys_ni_syscall /* readdir syscall holder */ + .long sys_ni_syscall /* 90 - old_mmap syscall holder */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_ni_syscall /* 95 - fchwon16 syscall holder */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm syscall holder */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_ni_syscall /* old uname syscall holder */ + .long sys_ni_syscall /* 110 - iopl syscall holder */ + .long sys_vhangup + .long sys_ni_syscall /* idle syscall holder */ + .long sys_ni_syscall /* vm86old syscall holder */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_ni_syscall /* sigreturn syscall holder */ + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* modify_ldt syscall holder */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_ni_syscall /* sigprocmask syscall holder */ + .long sys_ni_syscall /* create_module syscall holder */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130 - get_kernel_syms */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* afs_syscall syscall holder */ + .long sys_ni_syscall /* setfsuid16 syscall holder */ + .long sys_ni_syscall /* setfsgid16 syscall holder */ + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_ni_syscall /* setresuid16 syscall holder */ + .long sys_ni_syscall /* 165 - getresuid16 syscall holder */ + .long sys_tas /* vm86 syscall holder */ + .long sys_ni_syscall /* query_module syscall holder */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid /* 170 */ + .long sys_getresgid + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_ni_syscall /* chown16 syscall holder */ + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall /* Reserved for Security */ + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall /* reserved for "set_thread_area" system call */ + .long sys_ni_syscall /* reserved for "get_thread_area" system call */ + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_ni_syscall /* Reserved for sys_vserver */ + .long sys_ni_syscall /* Reserved for sys_mbind */ + .long sys_ni_syscall /* Reserved for sys_get_mempolicy */ + .long sys_ni_syscall /* Reserved for sys_set_mempolicy */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_ni_syscall /* reserved for kexec */ + .long sys_waitid diff --git a/arch/m32r/platforms/Makefile b/arch/m32r/platforms/Makefile new file mode 100644 index 00000000000..da03e1a8fe9 --- /dev/null +++ b/arch/m32r/platforms/Makefile @@ -0,0 +1,9 @@ +# arch/m32r/platforms/Makefile +obj-$(CONFIG_PLAT_M32104UT) += m32104ut/ +obj-$(CONFIG_PLAT_M32700UT) += m32700ut/ +obj-$(CONFIG_PLAT_MAPPI) += mappi/ +obj-$(CONFIG_PLAT_MAPPI2) += mappi2/ +obj-$(CONFIG_PLAT_MAPPI3) += mappi3/ +obj-$(CONFIG_PLAT_OAKS32R) += oaks32r/ +obj-$(CONFIG_PLAT_OPSPUT) += opsput/ +obj-$(CONFIG_PLAT_USRV) += usrv/ diff --git a/arch/m32r/platforms/m32104ut/Makefile b/arch/m32r/platforms/m32104ut/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/m32104ut/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/kernel/io_m32104ut.c b/arch/m32r/platforms/m32104ut/io.c index 2189eca30b5..e5d8be6fbb2 100644 --- a/arch/m32r/kernel/io_m32104ut.c +++ b/arch/m32r/platforms/m32104ut/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_m32104ut.c + * linux/arch/m32r/platforms/m32104ut/io.c * * Typical I/O routines for M32104UT board. * diff --git a/arch/m32r/kernel/setup_m32104ut.c b/arch/m32r/platforms/m32104ut/setup.c index 1692b321f47..98138b4e922 100644 --- a/arch/m32r/kernel/setup_m32104ut.c +++ b/arch/m32r/platforms/m32104ut/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_m32104ut.c + * linux/arch/m32r/platforms/m32104ut/setup.c * * Setup routines for M32104UT Board * diff --git a/arch/m32r/platforms/m32700ut/Makefile b/arch/m32r/platforms/m32700ut/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB index 525dab46982..525dab46982 100644 --- a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB diff --git a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB index aa503657a49..aa503657a49 100644 --- a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB diff --git a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB index adc608aab2f..adc608aab2f 100644 --- a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/platforms/m32700ut/io.c index 5898f4031a0..6862586e58d 100644 --- a/arch/m32r/kernel/io_m32700ut.c +++ b/arch/m32r/platforms/m32700ut/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_m32700ut.c + * linux/arch/m32r/platforms/m32700ut/io.c * * Typical I/O routines for M32700UT board. * diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/platforms/m32700ut/setup.c index 7efc145c74c..77b0ae9379e 100644 --- a/arch/m32r/kernel/setup_m32700ut.c +++ b/arch/m32r/platforms/m32700ut/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_m32700ut.c + * linux/arch/m32r/platforms/m32700ut/setup.c * * Setup routines for Renesas M32700UT Board * diff --git a/arch/m32r/platforms/mappi/Makefile b/arch/m32r/platforms/mappi/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/mappi/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/mappi/dot.gdbinit b/arch/m32r/platforms/mappi/dot.gdbinit index 7a1d293863e..7a1d293863e 100644 --- a/arch/m32r/mappi/dot.gdbinit +++ b/arch/m32r/platforms/mappi/dot.gdbinit diff --git a/arch/m32r/mappi/dot.gdbinit.nommu b/arch/m32r/platforms/mappi/dot.gdbinit.nommu index 297536cf67c..297536cf67c 100644 --- a/arch/m32r/mappi/dot.gdbinit.nommu +++ b/arch/m32r/platforms/mappi/dot.gdbinit.nommu diff --git a/arch/m32r/mappi/dot.gdbinit.smp b/arch/m32r/platforms/mappi/dot.gdbinit.smp index 171489a440d..171489a440d 100644 --- a/arch/m32r/mappi/dot.gdbinit.smp +++ b/arch/m32r/platforms/mappi/dot.gdbinit.smp diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/platforms/mappi/io.c index 31396789ab1..ac1c396d477 100644 --- a/arch/m32r/kernel/io_mappi.c +++ b/arch/m32r/platforms/mappi/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_mappi.c + * linux/arch/m32r/platforms/mappi/io.c * * Typical I/O routines for Mappi board. * diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/platforms/mappi/setup.c index fe73c9ec611..3ec087ff221 100644 --- a/arch/m32r/kernel/setup_mappi.c +++ b/arch/m32r/platforms/mappi/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_mappi.c + * linux/arch/m32r/platforms/mappi/setup.c * * Setup routines for Renesas MAPPI Board * diff --git a/arch/m32r/platforms/mappi2/Makefile b/arch/m32r/platforms/mappi2/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/mappi2/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/mappi2/dot.gdbinit.vdec2 b/arch/m32r/platforms/mappi2/dot.gdbinit.vdec2 index 797a830bd4b..797a830bd4b 100644 --- a/arch/m32r/mappi2/dot.gdbinit.vdec2 +++ b/arch/m32r/platforms/mappi2/dot.gdbinit.vdec2 diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/platforms/mappi2/io.c index ecc6aa88f9a..da58960b3f8 100644 --- a/arch/m32r/kernel/io_mappi2.c +++ b/arch/m32r/platforms/mappi2/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_mappi2.c + * linux/arch/m32r/platforms/mappi2/io.c * * Typical I/O routines for Mappi2 board. * diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/platforms/mappi2/setup.c index 55abb210275..d87969c6356 100644 --- a/arch/m32r/kernel/setup_mappi2.c +++ b/arch/m32r/platforms/mappi2/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_mappi2.c + * linux/arch/m32r/platforms/mappi2/setup.c * * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board * diff --git a/arch/m32r/platforms/mappi3/Makefile b/arch/m32r/platforms/mappi3/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/mappi3/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/mappi3/dot.gdbinit b/arch/m32r/platforms/mappi3/dot.gdbinit index 89c22184e13..89c22184e13 100644 --- a/arch/m32r/mappi3/dot.gdbinit +++ b/arch/m32r/platforms/mappi3/dot.gdbinit diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/platforms/mappi3/io.c index a13b5f6b07e..1bc3f90fdc5 100644 --- a/arch/m32r/kernel/io_mappi3.c +++ b/arch/m32r/platforms/mappi3/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_mappi3.c + * linux/arch/m32r/platforms/mappi3/io.c * * Typical I/O routines for Mappi3 board. * diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/platforms/mappi3/setup.c index 93dc010c7fc..785b4bd6d9f 100644 --- a/arch/m32r/kernel/setup_mappi3.c +++ b/arch/m32r/platforms/mappi3/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_mappi3.c + * linux/arch/m32r/platforms/mappi3/setup.c * * Setup routines for Renesas MAPPI-III(M3A-2170) Board * diff --git a/arch/m32r/platforms/oaks32r/Makefile b/arch/m32r/platforms/oaks32r/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/oaks32r/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/oaks32r/dot.gdbinit.nommu b/arch/m32r/platforms/oaks32r/dot.gdbinit.nommu index d481d972b80..d481d972b80 100644 --- a/arch/m32r/oaks32r/dot.gdbinit.nommu +++ b/arch/m32r/platforms/oaks32r/dot.gdbinit.nommu diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/platforms/oaks32r/io.c index 068bf47060f..364a3b2e890 100644 --- a/arch/m32r/kernel/io_oaks32r.c +++ b/arch/m32r/platforms/oaks32r/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_oaks32r.c + * linux/arch/m32r/platforms/oaks32r/io.c * * Typical I/O routines for OAKS32R board. * diff --git a/arch/m32r/kernel/setup_oaks32r.c b/arch/m32r/platforms/oaks32r/setup.c index cd62598e3ce..6faa5db68e9 100644 --- a/arch/m32r/kernel/setup_oaks32r.c +++ b/arch/m32r/platforms/oaks32r/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_oaks32r.c + * linux/arch/m32r/platforms/oaks32r/setup.c * * Setup routines for OAKS32R Board * diff --git a/arch/m32r/platforms/opsput/Makefile b/arch/m32r/platforms/opsput/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/opsput/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/opsput/dot.gdbinit b/arch/m32r/platforms/opsput/dot.gdbinit index b7e6c664085..b7e6c664085 100644 --- a/arch/m32r/opsput/dot.gdbinit +++ b/arch/m32r/platforms/opsput/dot.gdbinit diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/platforms/opsput/io.c index 3cbb1f717e5..379efb77123 100644 --- a/arch/m32r/kernel/io_opsput.c +++ b/arch/m32r/platforms/opsput/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_opsput.c + * linux/arch/m32r/platforms/opsput/io.c * * Typical I/O routines for OPSPUT board. * diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/platforms/opsput/setup.c index 62d6b71de45..fab13fd8542 100644 --- a/arch/m32r/kernel/setup_opsput.c +++ b/arch/m32r/platforms/opsput/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_opsput.c + * linux/arch/m32r/platforms/opsput/setup.c * * Setup routines for Renesas OPSPUT Board * diff --git a/arch/m32r/platforms/usrv/Makefile b/arch/m32r/platforms/usrv/Makefile new file mode 100644 index 00000000000..0de59084f21 --- /dev/null +++ b/arch/m32r/platforms/usrv/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/platforms/usrv/io.c index a8c0e2eceb4..f5e50d37bad 100644 --- a/arch/m32r/kernel/io_usrv.c +++ b/arch/m32r/platforms/usrv/io.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/io_usrv.c + * linux/arch/m32r/platforms/usrv/io.c * * Typical I/O routines for uServer board. * @@ -17,7 +17,7 @@ #include <asm/io.h> #include <linux/types.h> -#include "../drivers/m32r_cfc.h" +#include "../../../../drivers/pcmcia/m32r_cfc.h" extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); diff --git a/arch/m32r/kernel/setup_usrv.c b/arch/m32r/platforms/usrv/setup.c index f5b4b5ac31e..89588d649eb 100644 --- a/arch/m32r/kernel/setup_usrv.c +++ b/arch/m32r/platforms/usrv/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_usrv.c + * linux/arch/m32r/platforms/usrv/setup.c * * Setup routines for MITSUBISHI uServer * @@ -198,7 +198,7 @@ void __init init_IRQ(void) #endif /* CONFIG_SERIAL_M32R_SIO */ /* INT#67-#71: CFC#0 IREQ on PLD */ - for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) { + for (i = 0 ; i < CONFIG_M32R_CFC_NUM ; i++ ) { irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED; irq_desc[PLD_IRQ_CF0 + i].chip = &m32700ut_pld_irq_type; irq_desc[PLD_IRQ_CF0 + i].action = 0; @@ -246,4 +246,3 @@ void __init init_IRQ(void) icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11; enable_mappi_irq(M32R_IRQ_INT1); } - diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index e162ee685d2..918f5dbeaef 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -735,4 +735,14 @@ sys_call_table: .long sys_tee .long sys_vmsplice .long sys_move_pages /* 310 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_kexec_load + .long sys_getcpu + .long sys_epoll_pwait /* 315 */ + .long sys_utimensat + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd + .long sys_fallocate /* 320 */ diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index 2cf0690b788..e792d3cba4c 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -116,7 +116,6 @@ static inline void singlestep_disable(struct task_struct *child) void ptrace_disable(struct task_struct *child) { singlestep_disable(child); - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 4603f4f3c93..9620093514b 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -329,6 +329,16 @@ ENTRY(sys_call_table) .long sys_tee .long sys_vmsplice .long sys_move_pages /* 310 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_kexec_load + .long sys_getcpu + .long sys_epoll_pwait /* 315 */ + .long sys_utimensat + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd + .long sys_fallocate /* 320 */ .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 04797b289c2..3b807b4bc7c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -80,10 +80,10 @@ config MACH_DECSTATION If you have one of the following DECstation Models you definitely want to choose R4xx0 for the CPU Type: - DECstation 5000/50 - DECstation 5000/150 - DECstation 5000/260 - DECsystem 5900/260 + DECstation 5000/50 + DECstation 5000/150 + DECstation 5000/260 + DECsystem 5900/260 otherwise choose R3000. @@ -818,20 +818,6 @@ config EMMA2RH config SERIAL_RM9000 bool -# -# Unfortunately not all GT64120 systems run the chip at the same clock. -# As the user for the clock rate and try to minimize the available options. -# -choice - prompt "Galileo Chip Clock" - depends on MOMENCO_OCELOT - default SYSCLK_100 if MOMENCO_OCELOT - -config SYSCLK_100 - bool "100" if MOMENCO_OCELOT - -endchoice - config ARC32 bool diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 2345160e63f..b6c30800c66 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -36,6 +36,7 @@ void mask_and_ack_8259A(unsigned int); static struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, + .disable = disable_8259A_irq, .unmask = enable_8259A_irq, .mask_ack = mask_and_ack_8259A, }; diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 76903c72764..f60b3dc0fc6 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -35,7 +35,7 @@ static inline unsigned long dma_addr_to_virt(dma_addr_t dma_addr) static inline int cpu_is_noncoherent_r10000(struct device *dev) { return !plat_device_is_coherent(dev) && - (current_cpu_data.cputype == CPU_R10000 && + (current_cpu_data.cputype == CPU_R10000 || current_cpu_data.cputype == CPU_R12000); } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 09d91505b90..5240432e6d1 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -8,6 +8,7 @@ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. */ +#include <linux/bug.h> #include <linux/init.h> #include <linux/module.h> #include <linux/signal.h> @@ -132,6 +133,8 @@ void *kmap_coherent(struct page *page, unsigned long addr) pte_t pte; int tlbidx; + BUG_ON(Page_dcache_dirty(page)); + inc_preempt_count(); idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1); #ifdef CONFIG_MIPS_MT_SMTC @@ -208,7 +211,7 @@ void copy_user_highpage(struct page *to, struct page *from, void *vfrom, *vto; vto = kmap_atomic(to, KM_USER1); - if (cpu_has_dc_aliases) { + if (cpu_has_dc_aliases && !Page_dcache_dirty(from)) { vfrom = kmap_coherent(from, vaddr); copy_page(vto, vfrom); kunmap_coherent(); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 4ec0964b839..9cb39644b6f 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -78,7 +78,7 @@ enum fields SET = 0x200 }; -#define OP_MASK 0x2f +#define OP_MASK 0x3f #define OP_SH 26 #define RS_MASK 0x1f #define RS_SH 21 @@ -92,7 +92,7 @@ enum fields #define IMM_SH 0 #define JIMM_MASK 0x3ffffff #define JIMM_SH 0 -#define FUNC_MASK 0x2f +#define FUNC_MASK 0x3f #define FUNC_SH 0 #define SET_MASK 0x7 #define SET_SH 0 diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 6c5c684d142..589b745d822 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -141,6 +141,7 @@ static int __init pcibios_init(void) bus = pci_scan_bus(next_busno, hose->pci_ops, hose); hose->bus = bus; + need_domain_info = need_domain_info || hose->index; hose->need_domain_info = need_domain_info; if (bus) { next_busno = bus->subordinate + 1; diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index 78b608d2d4e..28ffec8e5d1 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -150,8 +150,8 @@ static int __init sgiseeq_devinit(void) return res; /* Second HPC is missing? */ - if (ip22_is_fullhouse() || - !get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) + if (!ip22_is_fullhouse() || + get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) return 0; sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 | diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 8e88a442b22..de3d01823ad 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -114,8 +114,8 @@ static unsigned long dosample(void) } while (msb); /* Stop the counter. */ - writeb(sgint->tcword, (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | - SGINT_TCWORD_MSWST)); + writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | SGINT_TCWORD_MSWST, + &sgint->tcword); /* * Return the difference, this is how far the r4k counter increments * for every 1/HZ seconds. We round off the nearest 1 MHz of master diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index e6b003ec671..fdd7bd98fb4 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -48,7 +48,6 @@ config SIBYTE_BCM1x55 config SIBYTE_SB1xxx_SOC bool - depends on EXPERIMENTAL select DMA_COHERENT select SIBYTE_CFE select SWAP_IO_SPACE diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 79ae6ef979b..e729b5f3026 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -100,8 +100,8 @@ DEFINE_SPINLOCK(bcm1480_imr_lock); void bcm1480_mask_irq(int cpu, int irq) { - unsigned long flags; - u64 cur_ints,hl_spacing; + unsigned long flags, hl_spacing; + u64 cur_ints; spin_lock_irqsave(&bcm1480_imr_lock, flags); hl_spacing = 0; @@ -117,8 +117,8 @@ void bcm1480_mask_irq(int cpu, int irq) void bcm1480_unmask_irq(int cpu, int irq) { - unsigned long flags; - u64 cur_ints,hl_spacing; + unsigned long flags, hl_spacing; + u64 cur_ints; spin_lock_irqsave(&bcm1480_imr_lock, flags); hl_spacing = 0; diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 9a8c9af43b2..d6a38cd5018 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -188,33 +188,21 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node( struct device_node *dn) { struct ibmebus_dev *dev; - const char *loc_code; - int length; - - loc_code = of_get_property(dn, "ibm,loc-code", NULL); - if (!loc_code) { - printk(KERN_WARNING "%s: node %s missing 'ibm,loc-code'\n", - __FUNCTION__, dn->name ? dn->name : "<unknown>"); - return ERR_PTR(-EINVAL); - } - - if (strlen(loc_code) == 0) { - printk(KERN_WARNING "%s: 'ibm,loc-code' is invalid\n", - __FUNCTION__); - return ERR_PTR(-EINVAL); - } + int i, len, bus_len; dev = kzalloc(sizeof(struct ibmebus_dev), GFP_KERNEL); - if (!dev) { + if (!dev) return ERR_PTR(-ENOMEM); - } dev->ofdev.node = of_node_get(dn); - length = strlen(loc_code); - memcpy(dev->ofdev.dev.bus_id, loc_code - + (length - min(length, BUS_ID_SIZE - 1)), - min(length, BUS_ID_SIZE - 1)); + len = strlen(dn->full_name + 1); + bus_len = min(len, BUS_ID_SIZE - 1); + memcpy(dev->ofdev.dev.bus_id, dn->full_name + 1 + + (len - bus_len), bus_len); + for (i = 0; i < bus_len; i++) + if (dev->ofdev.dev.bus_id[i] == '/') + dev->ofdev.dev.bus_id[i] = '_'; /* Register with generic device framework. */ if (ibmebus_register_device_common(dev, dn->name) != 0) { diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 095a30304c5..106d2921e2d 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -236,27 +236,34 @@ static irqreturn_t spu_irq_class_0(int irq, void *data) { struct spu *spu; + unsigned long stat, mask; spu = data; - spu->class_0_pending = 1; + + mask = spu_int_mask_get(spu, 0); + stat = spu_int_stat_get(spu, 0); + stat &= mask; + + spin_lock(&spu->register_lock); + spu->class_0_pending |= stat; + spin_unlock(&spu->register_lock); + spu->stop_callback(spu); + spu_int_stat_clear(spu, 0, stat); + return IRQ_HANDLED; } int spu_irq_class_0_bottom(struct spu *spu) { - unsigned long stat, mask; unsigned long flags; - - spu->class_0_pending = 0; + unsigned long stat; spin_lock_irqsave(&spu->register_lock, flags); - mask = spu_int_mask_get(spu, 0); - stat = spu_int_stat_get(spu, 0); - - stat &= mask; + stat = spu->class_0_pending; + spu->class_0_pending = 0; if (stat & 1) /* invalid DMA alignment */ __spu_trap_dma_align(spu); @@ -267,7 +274,6 @@ spu_irq_class_0_bottom(struct spu *spu) if (stat & 4) /* error on SPU */ __spu_trap_error(spu); - spu_int_stat_clear(spu, 0, stat); spin_unlock_irqrestore(&spu->register_lock, flags); return (stat & 0x7) ? -EIO : 0; diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h index 87d52060fec..2eb8f92704b 100644 --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -83,6 +83,7 @@ enum ps3_dev_type { PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ PS3_DEV_TYPE_SB_GPIO = 6, PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ + PS3_DEV_TYPE_STOR_DUMMY = 32, PS3_DEV_TYPE_NOACCESS = 255, }; diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 8cc37cfea0f..1c94824f7b6 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -349,6 +349,35 @@ int ps3_repository_find_device(struct ps3_repository_device *repo) return result; } + if (tmp.bus_type == PS3_BUS_TYPE_STORAGE) { + /* + * A storage device may show up in the repository before the + * hypervisor has finished probing its type and regions + */ + unsigned int num_regions; + + if (tmp.dev_type == PS3_DEV_TYPE_STOR_DUMMY) { + pr_debug("%s:%u storage device not ready\n", __func__, + __LINE__); + return -ENODEV; + } + + result = ps3_repository_read_stor_dev_num_regions(tmp.bus_index, + tmp.dev_index, + &num_regions); + if (result) { + pr_debug("%s:%d read_stor_dev_num_regions failed\n", + __func__, __LINE__); + return result; + } + + if (!num_regions) { + pr_debug("%s:%u storage device has no regions yet\n", + __func__, __LINE__); + return -ENODEV; + } + } + result = ps3_repository_read_dev_id(tmp.bus_index, tmp.dev_index, &tmp.dev_id); diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index ac2a4b8a4c1..d1630a074ac 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -505,6 +505,8 @@ static void mfc_sr1_set(struct spu *spu, u64 sr1) static const u64 allowed = ~(MFC_STATE1_LOCAL_STORAGE_DECODE_MASK | MFC_STATE1_PROBLEM_STATE_MASK); + sr1 |= MFC_STATE1_MASTER_RUN_CONTROL_MASK; + BUG_ON((sr1 & allowed) != (spu_pdata(spu)->cache.sr1 & allowed)); spu_pdata(spu)->cache.sr1 = sr1; diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 139b4cff801..e8dac81d8a0 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -744,7 +744,7 @@ static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, { struct device_node *child; const u32 *reg; - int reglen, devfn; + int reglen, devfn, prev_devfn; struct pci_dev *dev; if (ofpci_verbose) @@ -752,14 +752,25 @@ static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, node->full_name, bus->number); child = NULL; + prev_devfn = -1; while ((child = of_get_next_child(node, child)) != NULL) { if (ofpci_verbose) printk(" * %s\n", child->full_name); reg = of_get_property(child, "reg", ®len); if (reg == NULL || reglen < 20) continue; + devfn = (reg[0] >> 8) & 0xff; + /* This is a workaround for some device trees + * which list PCI devices twice. On the V100 + * for example, device number 3 is listed twice. + * Once as "pm" and once again as "lomp". + */ + if (devfn == prev_devfn) + continue; + prev_devfn = devfn; + /* create a new pci_dev for this device */ dev = of_create_pci_dev(pbm, child, bus, devfn, 0); if (!dev) diff --git a/arch/x86_64/vdso/vclock_gettime.c b/arch/x86_64/vdso/vclock_gettime.c index 17f6a00de71..5b54cdfb2b0 100644 --- a/arch/x86_64/vdso/vclock_gettime.c +++ b/arch/x86_64/vdso/vclock_gettime.c @@ -34,10 +34,11 @@ static long vdso_fallback_gettime(long clock, struct timespec *ts) static inline long vgetns(void) { + long v; cycles_t (*vread)(void); vread = gtod->clock.vread; - return ((vread() - gtod->clock.cycle_last) * gtod->clock.mult) >> - gtod->clock.shift; + v = (vread() - gtod->clock.cycle_last) & gtod->clock.mask; + return (v * gtod->clock.mult) >> gtod->clock.shift; } static noinline int do_realtime(struct timespec *ts) diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index 7755834b884..d8f8ec32021 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -59,11 +59,13 @@ static inline void blkcipher_unmap_dst(struct blkcipher_walk *walk) scatterwalk_unmap(walk->dst.virt.addr, 1); } +/* Get a spot of the specified length that does not straddle a page. + * The caller needs to ensure that there is enough space for this operation. + */ static inline u8 *blkcipher_get_spot(u8 *start, unsigned int len) { - if (offset_in_page(start + len) < len) - return (u8 *)((unsigned long)(start + len) & PAGE_MASK); - return start; + u8 *end_page = (u8 *)(((unsigned long)(start + len - 1)) & PAGE_MASK); + return start > end_page ? start : end_page; } static inline unsigned int blkcipher_done_slow(struct crypto_blkcipher *tfm, @@ -155,7 +157,8 @@ static inline int blkcipher_next_slow(struct blkcipher_desc *desc, if (walk->buffer) goto ok; - n = bsize * 2 + (alignmask & ~(crypto_tfm_ctx_alignment() - 1)); + n = bsize * 3 - (alignmask + 1) + + (alignmask & ~(crypto_tfm_ctx_alignment() - 1)); walk->buffer = kmalloc(n, GFP_ATOMIC); if (!walk->buffer) return blkcipher_walk_done(desc, walk, -ENOMEM); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a3ee087223d..c43de9a710d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6035,6 +6035,7 @@ void ata_dev_init(struct ata_device *dev) */ spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_INIT_MASK; + dev->horkage = 0; spin_unlock_irqrestore(ap->lock, flags); memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 94e5edc12ac..71bdc3b3189 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -48,6 +48,13 @@ static struct dmi_system_id cable_dmi_table[] = { DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), }, }, + { + .ident = "Toshiba Satelite S1800-814", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), + }, + }, { } }; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index ed637ae33ec..5d8b91e70ec 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -533,6 +533,10 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct it821x_dev *itdev = ap->private_data; + /* Only use dma for transfers to/from the media. */ + if (qc->nbytes < 2048) + return -EOPNOTSUPP; + /* No ATAPI DMA in smart mode */ if (itdev->smart) return -EOPNOTSUPP; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index ea18e33f50e..636c4f1a0b2 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -97,6 +97,7 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -243,7 +244,6 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo int ut; int offset = 3 - (2*ap->port_no) - adev->devno; - /* Calculate the timing values we require */ ata_timing_compute(adev, mode, &t, T, UT); @@ -290,9 +290,17 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; break; } + /* Set UDMA unless device is not UDMA capable */ - if (udma_type) - pci_write_config_byte(pdev, 0x50 + offset, ut); + if (udma_type) { + u8 cable80_status; + + /* Get 80-wire cable detection bit */ + pci_read_config_byte(pdev, 0x50 + offset, &cable80_status); + cable80_status &= 0x10; + + pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status); + } } static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 92bf868ca05..504a95d888b 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -17,8 +17,8 @@ */ -#define DAC960_DriverVersion "2.5.48" -#define DAC960_DriverDate "14 May 2006" +#define DAC960_DriverVersion "2.5.49" +#define DAC960_DriverDate "21 Aug 2007" #include <linux/module.h> @@ -1165,9 +1165,9 @@ static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T int i; - if (pci_set_dma_mask(Controller->PCIDevice, DAC690_V1_PciDmaMask)) + if (pci_set_dma_mask(Controller->PCIDevice, DMA_32BIT_MASK)) return DAC960_Failure(Controller, "DMA mask out of range"); - Controller->BounceBufferLimit = DAC690_V1_PciDmaMask; + Controller->BounceBufferLimit = DMA_32BIT_MASK; if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) { CommandMailboxesSize = 0; @@ -1368,9 +1368,12 @@ static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T dma_addr_t CommandMailboxDMA; DAC960_V2_CommandStatus_T CommandStatus; - if (pci_set_dma_mask(Controller->PCIDevice, DAC690_V2_PciDmaMask)) - return DAC960_Failure(Controller, "DMA mask out of range"); - Controller->BounceBufferLimit = DAC690_V2_PciDmaMask; + if (!pci_set_dma_mask(Controller->PCIDevice, DMA_64BIT_MASK)) + Controller->BounceBufferLimit = DMA_64BIT_MASK; + else if (!pci_set_dma_mask(Controller->PCIDevice, DMA_32BIT_MASK)) + Controller->BounceBufferLimit = DMA_32BIT_MASK; + else + return DAC960_Failure(Controller, "DMA mask out of range"); /* This is a temporary dma mapping, used only in the scope of this function */ CommandMailbox = pci_alloc_consistent(PCI_Device, diff --git a/drivers/block/DAC960.h b/drivers/block/DAC960.h index f5e2436c39a..85fa9bb6375 100644 --- a/drivers/block/DAC960.h +++ b/drivers/block/DAC960.h @@ -61,13 +61,6 @@ #define DAC960_V2_MaxPhysicalDevices 272 /* - Define the pci dma mask supported by DAC960 V1 and V2 Firmware Controlers - */ - -#define DAC690_V1_PciDmaMask 0xffffffff -#define DAC690_V2_PciDmaMask 0xffffffffffffffffULL - -/* Define a 32/64 bit I/O Address data type. */ diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 59b054810ed..98a9cdeaffb 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -691,15 +691,18 @@ static void hci_usb_rx_complete(struct urb *urb) urb->iso_frame_desc[i].offset, urb->iso_frame_desc[i].actual_length); - if (!urb->iso_frame_desc[i].status) + if (!urb->iso_frame_desc[i].status) { + husb->hdev->stat.byte_rx += urb->iso_frame_desc[i].actual_length; hci_recv_fragment(husb->hdev, _urb->type, urb->transfer_buffer + urb->iso_frame_desc[i].offset, urb->iso_frame_desc[i].actual_length); + } } #else ; #endif } else { + husb->hdev->stat.byte_rx += count; err = hci_recv_fragment(husb->hdev, _urb->type, urb->transfer_buffer, count); if (err < 0) { BT_ERR("%s corrupted packet: type %d count %d", diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 2c9ca2c6462..7c69bf259ca 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -506,6 +506,11 @@ static void intel_i830_init_gtt_entries(void) break; } } else { + /* G33's GTT stolen memory is separate from gfx data + * stolen memory. + */ + if (IS_G33) + size = 0; switch (gmch_ctrl & I830_GMCH_GMS_MASK) { case I855_GMCH_GMS_STOLEN_1M: gtt_entries = MB(1) - KB(size); @@ -914,6 +919,7 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) struct aper_size_info_fixed *size; int num_entries; u32 temp, temp2; + int gtt_map_size = 256 * 1024; size = agp_bridge->current_size; page_order = size->page_order; @@ -923,7 +929,9 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); pci_read_config_dword(intel_private.pcidev, I915_PTEADDR,&temp2); - intel_private.gtt = ioremap(temp2, 256 * 1024); + if (IS_G33) + gtt_map_size = 1024 * 1024; /* 1M on G33 */ + intel_private.gtt = ioremap(temp2, gtt_map_size); if (!intel_private.gtt) return -ENOMEM; diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 3423e9ee648..4a8969cef31 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -796,14 +796,14 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, retval = inq_canon(tty); return put_user(retval, (unsigned int __user *) arg); case TIOCGLCKTRMIOS: - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) return -EFAULT; return 0; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg)) + if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg)) return -EFAULT; return 0; diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c index 3bba224cb55..6eb434749cd 100644 --- a/drivers/edac/e752x_edac.c +++ b/drivers/edac/e752x_edac.c @@ -967,7 +967,7 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx) if (!force_function_unhide && !(stat8 & (1 << 5))) { printk(KERN_INFO "Contact your BIOS vendor to see if the " "E752x error registers can be safely un-hidden\n"); - return -ENOMEM; + return -ENODEV; } stat8 |= (1 << 5); pci_write_config_byte(pdev, E752X_DEVPRES1, stat8); diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 4e6bad15c4b..e80af67664c 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -75,7 +75,7 @@ extern int edac_debug_level; #define edac_debug_printk(level, fmt, arg...) \ do { \ if (level <= edac_debug_level) \ - edac_printk(KERN_EMERG, EDAC_DEBUG, fmt, ##arg); \ + edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \ } while(0) #define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ ) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 7e427b4c74b..e14c1ca7813 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1945,10 +1945,8 @@ static int pci_suspend(struct pci_dev *pdev, pm_message_t state) return err; } err = pci_set_power_state(pdev, pci_choose_state(pdev, state)); - if (err) { - fw_error("pci_set_power_state failed\n"); - return err; - } + if (err) + fw_error("pci_set_power_state failed with %d\n", err); return 0; } diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 565c4e679b8..6eea3476b90 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -882,7 +882,7 @@ static int __init lm78_isa_device_add(unsigned short address) { struct resource res = { .start = address, - .end = address + LM78_EXTENT, + .end = address + LM78_EXTENT - 1, .name = "lm78", .flags = IORESOURCE_IO, }; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index c95909cc1d2..dcc941a5aaf 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1746,7 +1746,7 @@ w83781d_isa_device_add(unsigned short address) { struct resource res = { .start = address, - .end = address + W83781D_EXTENT, + .end = address + W83781D_EXTENT - 1, .name = "w83781d", .flags = IORESOURCE_IO, }; diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 8a5f5825bb7..7f0a0a62cf6 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -357,13 +357,29 @@ static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) return wrcount; } +static int acknak(struct i2c_adapter *i2c_adap, int is_ack) +{ + struct i2c_algo_bit_data *adap = i2c_adap->algo_data; + + /* assert: sda is high */ + if (is_ack) /* send ack */ + setsda(adap, 0); + udelay((adap->udelay + 1) / 2); + if (sclhi(adap) < 0) { /* timeout */ + dev_err(&i2c_adap->dev, "readbytes: ack/nak timeout\n"); + return -ETIMEDOUT; + } + scllo(adap); + return 0; +} + static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) { int inval; int rdcount=0; /* counts bytes read */ - struct i2c_algo_bit_data *adap = i2c_adap->algo_data; unsigned char *temp = msg->buf; int count = msg->len; + const unsigned flags = msg->flags; while (count > 0) { inval = i2c_inb(i2c_adap); @@ -377,28 +393,12 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) temp++; count--; - if (msg->flags & I2C_M_NO_RD_ACK) { - bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x\n", - inval); - continue; - } - - /* assert: sda is high */ - if (count) /* send ack */ - setsda(adap, 0); - udelay((adap->udelay + 1) / 2); - bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x %s\n", inval, - count ? "A" : "NA"); - if (sclhi(adap)<0) { /* timeout */ - dev_err(&i2c_adap->dev, "readbytes: timeout at ack\n"); - return -ETIMEDOUT; - }; - scllo(adap); - /* Some SMBus transactions require that we receive the transaction length as the first read byte. */ - if (rdcount == 1 && (msg->flags & I2C_M_RECV_LEN)) { + if (rdcount == 1 && (flags & I2C_M_RECV_LEN)) { if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) { + if (!(flags & I2C_M_NO_RD_ACK)) + acknak(i2c_adap, 0); dev_err(&i2c_adap->dev, "readbytes: invalid " "block length (%d)\n", inval); return -EREMOTEIO; @@ -409,6 +409,18 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) count += inval; msg->len += inval; } + + bit_dbg(2, &i2c_adap->dev, "readbytes: 0x%02x %s\n", + inval, + (flags & I2C_M_NO_RD_ACK) + ? "(no ack/nak)" + : (count ? "A" : "NA")); + + if (!(flags & I2C_M_NO_RD_ACK)) { + inval = acknak(i2c_adap, count); + if (inval < 0) + return inval; + } } return rdcount; } diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 025f19423fa..44e1cd21bb0 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -147,7 +147,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev) * The reason to do so is to avoid sysfs names that only make * sense when there are multiple adapters. */ - adap->nr = pdev->id >= 0 ? pdev->id : 0; + adap->nr = (pdev->id != -1) ? pdev->id : 0; ret = i2c_bit_add_numbered_bus(adap); if (ret) goto err_add_bus; diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 9d6b790d432..bb5466b27b5 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -926,7 +926,7 @@ static int i2c_pxa_probe(struct platform_device *dev) * The reason to do so is to avoid sysfs names that only make * sense when there are multiple adapters. */ - i2c->adap.nr = dev->id >= 0 ? dev->id : 0; + i2c->adap.nr = dev->id != -1 ? dev->id : 0; ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 7adb61bad6a..4200251ff63 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -781,7 +781,7 @@ endif config BLK_DEV_IDE_PMAC bool "Builtin PowerMac IDE support" - depends on PPC_PMAC && IDE=y + depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y help This driver provides support for the built-in IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -946,7 +946,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_MPC8xx_IDE bool "MPC8xx IDE support" - depends on 8xx && IDE=y && BLK_DEV_IDE=y + depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE select IDE_GENERIC help This option provides support for IDE on Motorola MPC8xx Systems. diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index f4cd2700cae..646a54e233d 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -615,8 +615,7 @@ u8 eighty_ninty_three (ide_drive_t *drive) if (hwif->cbl != ATA_CBL_PATA80 && !ivb) goto no_80w; - /* Check for SATA but only if we are ATA5 or higher */ - if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0)) + if (ide_dev_is_sata(id)) return 1; /* diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 025689de50e..11ecb618007 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -596,6 +596,13 @@ static struct dmi_system_id cable_dmi_table[] = { DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), }, }, + { + .ident = "Toshiba Satellite S1800-814", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), + }, + }, { } }; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 2cd74c345a6..39f1c89f7c8 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.10 Jun 29, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.12 Aug 19, 2007 * * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -68,7 +68,8 @@ * HPT37x chip family; save space by introducing the separate transfer mode * table in which the mode lookup is done * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives - * the wrong PCI frequency since DPLL has already been calibrated by BIOS + * the wrong PCI frequency since DPLL has already been calibrated by BIOS; + * read it only from the function 0 of HPT374 chips * - fix the hotswap code: it caused RESET- to glitch when tristating the bus, * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead * - pass to init_chipset() handlers a copy of the IDE PCI device structure as @@ -113,6 +114,7 @@ * unify HPT36x/37x timing setup code and the speedproc handlers by joining * the register setting lists into the table indexed by the clock selected * - set the correct hwif->ultra_mask for each individual chip + * - add UltraDMA mode filtering for the HPT37[24] based SATA cards * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com> */ @@ -517,42 +519,44 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) } /* - * Note for the future; the SATA hpt37x we must set - * either PIO or UDMA modes 0,4,5 + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... */ static u8 hpt3xx_udma_filter(ide_drive_t *drive) { - struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); - u8 mask; + ide_hwif_t *hwif = HWIF(drive); + struct hpt_info *info = pci_get_drvdata(hwif->pci_dev); + u8 mask = hwif->ultra_mask; switch (info->chip_type) { - case HPT370A: - if (!HPT370_ALLOW_ATA100_5 || - check_in_drive_list(drive, bad_ata100_5)) - return 0x1f; - else - return 0x3f; - case HPT370: - if (!HPT370_ALLOW_ATA100_5 || - check_in_drive_list(drive, bad_ata100_5)) - mask = 0x1f; - else - mask = 0x3f; - break; case HPT36x: if (!HPT366_ALLOW_ATA66_4 || check_in_drive_list(drive, bad_ata66_4)) - mask = 0x0f; - else - mask = 0x1f; + mask = ATA_UDMA3; if (!HPT366_ALLOW_ATA66_3 || check_in_drive_list(drive, bad_ata66_3)) - mask = 0x07; + mask = ATA_UDMA2; + break; + case HPT370: + if (!HPT370_ALLOW_ATA100_5 || + check_in_drive_list(drive, bad_ata100_5)) + mask = ATA_UDMA4; break; + case HPT370A: + if (!HPT370_ALLOW_ATA100_5 || + check_in_drive_list(drive, bad_ata100_5)) + return ATA_UDMA4; + case HPT372 : + case HPT372A: + case HPT372N: + case HPT374 : + if (ide_dev_is_sata(drive->id)) + mask &= ~0x0e; + /* Fall thru */ default: - return 0x7f; + return mask; } return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask; @@ -981,6 +985,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha struct hpt_info *info = kmalloc(sizeof(struct hpt_info), GFP_KERNEL); unsigned long io_base = pci_resource_start(dev, 4); u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ + u8 chip_type; enum ata_clock clock; if (info == NULL) { @@ -992,7 +997,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * Copy everything from a static "template" structure * to just allocated per-chip hpt_info structure. */ - *info = *(struct hpt_info *)pci_get_drvdata(dev); + memcpy(info, pci_get_drvdata(dev), sizeof(struct hpt_info)); + chip_type = info->chip_type; pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); @@ -1002,7 +1008,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha /* * First, try to estimate the PCI clock frequency... */ - if (info->chip_type >= HPT370) { + if (chip_type >= HPT370) { u8 scr1 = 0; u16 f_cnt = 0; u32 temp = 0; @@ -1016,7 +1022,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * HighPoint does this for HPT372A. * NOTE: This register is only writeable via I/O space. */ - if (info->chip_type == HPT372A) + if (chip_type == HPT372A) outb(0x0e, io_base + 0x9c); /* @@ -1034,13 +1040,28 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * First try reading the register in which the HighPoint BIOS * saves f_CNT value before reprogramming the DPLL from its * default setting (which differs for the various chips). - * NOTE: This register is only accessible via I/O space. * - * In case the signature check fails, we'll have to resort to - * reading the f_CNT register itself in hopes that nobody has - * touched the DPLL yet... + * NOTE: This register is only accessible via I/O space; + * HPT374 BIOS only saves it for the function 0, so we have to + * always read it from there -- no need to check the result of + * pci_get_slot() for the function 0 as the whole device has + * been already "pinned" (via function 1) in init_setup_hpt374() + */ + if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { + struct pci_dev *dev1 = pci_get_slot(dev->bus, + dev->devfn - 1); + unsigned long io_base = pci_resource_start(dev1, 4); + + temp = inl(io_base + 0x90); + pci_dev_put(dev1); + } else + temp = inl(io_base + 0x90); + + /* + * In case the signature check fails, we'll have to + * resort to reading the f_CNT register itself in hopes + * that nobody has touched the DPLL yet... */ - temp = inl(io_base + 0x90); if ((temp & 0xFFFFF000) != 0xABCDE000) { int i; @@ -1120,7 +1141,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * We also don't like using the DPLL because this causes glitches * on PRST-/SRST- when the state engine gets reset... */ - if (info->chip_type >= HPT374 || info->settings[clock] == NULL) { + if (chip_type >= HPT374 || info->settings[clock] == NULL) { u16 f_low, delta = pci_clk < 50 ? 2 : 4; int adjust; @@ -1190,7 +1211,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha /* Point to this chip's own instance of the hpt_info structure. */ pci_set_drvdata(dev, info); - if (info->chip_type >= HPT370) { + if (chip_type >= HPT370) { u8 mcr1, mcr4; /* @@ -1209,7 +1230,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * the MISC. register to stretch the UltraDMA Tss timing. * NOTE: This register is only writeable via I/O space. */ - if (info->chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) + if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c); @@ -1218,25 +1239,24 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = pci_get_drvdata(dev); - int serialize = HPT_SERIALIZE_IO; - u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; - u8 chip_type = info->chip_type; - u8 new_mcr, old_mcr = 0; + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = pci_get_drvdata(dev); + int serialize = HPT_SERIALIZE_IO; + u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; + u8 chip_type = info->chip_type; + u8 new_mcr, old_mcr = 0; /* Cache the channel's MISC. control registers' offset */ - hwif->select_data = hwif->channel ? 0x54 : 0x50; + hwif->select_data = hwif->channel ? 0x54 : 0x50; - hwif->tuneproc = &hpt3xx_tune_drive; - hwif->speedproc = &hpt3xx_tune_chipset; - hwif->quirkproc = &hpt3xx_quirkproc; - hwif->intrproc = &hpt3xx_intrproc; - hwif->maskproc = &hpt3xx_maskproc; - hwif->busproc = &hpt3xx_busproc; + hwif->tuneproc = &hpt3xx_tune_drive; + hwif->speedproc = &hpt3xx_tune_chipset; + hwif->quirkproc = &hpt3xx_quirkproc; + hwif->intrproc = &hpt3xx_intrproc; + hwif->maskproc = &hpt3xx_maskproc; + hwif->busproc = &hpt3xx_busproc; - if (chip_type <= HPT370A) - hwif->udma_filter = &hpt3xx_udma_filter; + hwif->udma_filter = &hpt3xx_udma_filter; /* * HPT3xxN chips have some complications: @@ -1486,19 +1506,19 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) d->host_flags |= IDE_HFLAG_SINGLE; d->enablebits[0].mask = d->enablebits[0].val = 0x10; - d->udma_mask = HPT366_ALLOW_ATA66_3 ? - (HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07; + d->udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? + ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2; break; case 3: case 4: - d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f; + d->udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4; break; default: rev = 6; /* fall thru */ case 5: case 6: - d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f; + d->udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5; break; } @@ -1559,7 +1579,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f, + .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .bootable = OFF_BOARD, .extra = 240, .pio_mask = ATA_PIO4, @@ -1571,7 +1591,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .udma_mask = HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f, + .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .bootable = OFF_BOARD, .extra = 240, .pio_mask = ATA_PIO4, @@ -1583,7 +1603,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .udma_mask = HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f, + .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .bootable = OFF_BOARD, .extra = 240, .pio_mask = ATA_PIO4, @@ -1595,7 +1615,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .udma_mask = 0x3f, + .udma_mask = ATA_UDMA5, .bootable = OFF_BOARD, .extra = 240, .pio_mask = ATA_PIO4, @@ -1607,7 +1627,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .autodma = AUTODMA, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f, + .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .bootable = OFF_BOARD, .extra = 240, .pio_mask = ATA_PIO4, diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index f6db2f37efa..7b0e479c355 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -9,7 +9,7 @@ * Split from: * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2005-2006 MontaVista Software, Inc. + * Copyright (C) 2005-2007 MontaVista Software, Inc. * Portions Copyright (C) 1999 Promise Technology, Inc. * Author: Frank Tiernan (frankt@promise.com) * Released under terms of General Public License @@ -341,7 +341,7 @@ static long __devinit detect_pll_input_clock(unsigned long dma_base) */ usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + (end_time.tv_usec - start_time.tv_usec); - pll_input = ((start_count - end_count) & 0x3ffffff) / 10 * + pll_input = ((start_count - end_count) & 0x3fffffff) / 10 * (10000000 / usec_elapsed); DBG("start[%ld] end[%ld]\n", start_count, end_count); @@ -535,7 +535,7 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev, (dev->bus->self->device == PCI_DEVICE_ID_DEC_21150)) { if (PCI_SLOT(dev->devfn) & 2) return -ENODEV; - d->extra = 0; + while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { if ((findev->vendor == dev->vendor) && (findev->device == dev->device) && @@ -544,7 +544,8 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev, findev->irq = dev->irq; } ret = ide_setup_pci_devices(dev, findev, d); - pci_dev_put(findev); + if (ret < 0) + pci_dev_put(findev); return ret; } } diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 581316f9581..a7be7795e6a 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -1,6 +1,6 @@ /* * - * Version 3.46 + * Version 3.47 * * VIA IDE driver for Linux. Supported southbridges: * @@ -74,6 +74,7 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -429,19 +430,26 @@ static struct dmi_system_id cable_dmi_table[] = { { } }; -static int via_cable_override(void) +static int via_cable_override(struct pci_dev *pdev) { /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; + + /* Arima W730-K8/Targa Visionary 811/... */ + if (pdev->subsystem_vendor == 0x161F && + pdev->subsystem_device == 0x2032) + return 1; + return 0; } static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif) { - struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); + struct pci_dev *pdev = hwif->pci_dev; + struct via82cxxx_dev *vdev = pci_get_drvdata(pdev); - if (via_cable_override()) + if (via_cable_override(pdev)) return ATA_CBL_PATA40_SHORT; if ((vdev->via_80w >> hwif->channel) & 1) diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 8859fe2f5ac..dab79afa9b2 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -32,7 +32,6 @@ #include <asm/mpc8xx.h> #include <asm/mmu.h> #include <asm/processor.h> -#include <asm/residual.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/ide.h> diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 30e596c0f12..1129f8c3084 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -816,19 +816,15 @@ static int __init ide_scan_pcidev(struct pci_dev *dev) struct list_head *l; struct pci_driver *d; - list_for_each(l, &ide_pci_drivers) - { + list_for_each(l, &ide_pci_drivers) { d = list_entry(l, struct pci_driver, node); - if(d->id_table) - { - const struct pci_device_id *id = pci_match_id(d->id_table, dev); - if(id != NULL) - { - if(d->probe(dev, id) >= 0) - { - dev->driver = d; - return 1; - } + if (d->id_table) { + const struct pci_device_id *id = pci_match_id(d->id_table, + dev); + if (id != NULL && d->probe(dev, id) >= 0) { + dev->driver = d; + pci_dev_get(dev); + return 1; } } } @@ -851,15 +847,13 @@ void __init ide_scan_pcibus (int scan_direction) struct list_head *l, *n; pre_init = 0; - if (!scan_direction) { - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + if (!scan_direction) + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) ide_scan_pcidev(dev); - } - } else { - while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + else + while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) + != NULL) ide_scan_pcidev(dev); - } - } /* * Hand the drivers over to the PCI layer now we @@ -869,12 +863,9 @@ void __init ide_scan_pcibus (int scan_direction) list_for_each_safe(l, n, &ide_pci_drivers) { list_del(l); d = list_entry(l, struct pci_driver, node); - if (__pci_register_driver(d, d->driver.owner, - d->driver.mod_name)) { - printk(KERN_ERR "%s: failed to register driver " - "for %s\n", __FUNCTION__, - d->driver.mod_name); - } + if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name)) + printk(KERN_ERR "%s: failed to register driver for %s\n", + __FUNCTION__, d->driver.mod_name); } } #endif diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 702a526cf45..f8fe4214809 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -211,6 +211,16 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + /* + * Like DV4017EA does not raise AUXERR for errors on MUX ports. + */ + .ident = "HP Pavilion DV4270ca", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"), + }, + }, + { .ident = "Toshiba P10", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 06b05dd2248..c2eea2767e1 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1040,7 +1040,7 @@ static void __devinit i8042_register_ports(void) } } -static void __devinit i8042_unregister_ports(void) +static void __devexit i8042_unregister_ports(void) { int i; diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index b407028ffc5..741f6c6f1e5 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -767,7 +767,7 @@ static int usbtouch_probe(struct usb_interface *intf, le16_to_cpu(udev->descriptor.idProduct)); usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); - strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); + strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); input_dev->name = usbtouch->name; input_dev->phys = usbtouch->phys; diff --git a/drivers/lguest/lguest.c b/drivers/lguest/lguest.c index 6e135ac0834..ee1c6d05c3d 100644 --- a/drivers/lguest/lguest.c +++ b/drivers/lguest/lguest.c @@ -964,11 +964,12 @@ __init void lguest_init(void *boot) { /* Copy boot parameters first: the Launcher put the physical location * in %esi, and head.S converted that to a virtual address and handed - * it to us. */ - memcpy(&boot_params, boot, PARAM_SIZE); + * it to us. We use "__memcpy" because "memcpy" sometimes tries to do + * tricky things to go faster, and we're not ready for that. */ + __memcpy(&boot_params, boot, PARAM_SIZE); /* The boot parameters also tell us where the command-line is: save * that, too. */ - memcpy(boot_command_line, __va(boot_params.hdr.cmd_line_ptr), + __memcpy(boot_command_line, __va(boot_params.hdr.cmd_line_ptr), COMMAND_LINE_SIZE); /* We're under lguest, paravirt is enabled, and we're running at diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 2aff4be35dc..4d63773ee73 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2541,7 +2541,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, struct dma_async_tx_descriptor *tx = NULL; clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); for (i = 0; i < sh->disks; i++) - if (i != sh->pd_idx && (r6s && i != r6s->qd_idx)) { + if (i != sh->pd_idx && (!r6s || i != r6s->qd_idx)) { int dd_idx, pd_idx, j; struct stripe_head *sh2; @@ -2574,7 +2574,8 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags); for (j = 0; j < conf->raid_disks; j++) if (j != sh2->pd_idx && - (r6s && j != r6s->qd_idx) && + (!r6s || j != raid6_next_disk(sh2->pd_idx, + sh2->disks)) && !test_bit(R5_Expanded, &sh2->dev[j].flags)) break; if (j == conf->raid_disks) { @@ -2583,12 +2584,12 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, } release_stripe(sh2); - /* done submitting copies, wait for them to complete */ - if (i + 1 >= sh->disks) { - async_tx_ack(tx); - dma_wait_for_async_tx(tx); - } } + /* done submitting copies, wait for them to complete */ + if (tx) { + async_tx_ack(tx); + dma_wait_for_async_tx(tx); + } } /* @@ -2855,7 +2856,7 @@ static void handle_stripe5(struct stripe_head *sh) sh->disks = conf->raid_disks; sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks); - s.locked += handle_write_operations5(sh, 0, 1); + s.locked += handle_write_operations5(sh, 1, 1); } else if (s.expanded && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { clear_bit(STRIPE_EXPAND_READY, &sh->state); diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index bfebd2fa7ad..955ea60583b 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -941,7 +941,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev) host = mmc_priv(mmc); - if (host->present != -1) { + if (host->board->det_pin) { device_init_wakeup(&pdev->dev, 0); free_irq(host->board->det_pin, host); cancel_delayed_work(&host->mmc->detect); @@ -972,7 +972,7 @@ static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) struct at91mci_host *host = mmc_priv(mmc); int ret = 0; - if (device_may_wakeup(&pdev->dev)) + if (host->board->det_pin && device_may_wakeup(&pdev->dev)) enable_irq_wake(host->board->det_pin); if (mmc) @@ -987,7 +987,7 @@ static int at91_mci_resume(struct platform_device *pdev) struct at91mci_host *host = mmc_priv(mmc); int ret = 0; - if (device_may_wakeup(&pdev->dev)) + if (host->board->det_pin && device_may_wakeup(&pdev->dev)) disable_irq_wake(host->board->det_pin); if (mmc) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 58740428dd0..9034a05734e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -64,8 +64,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.80" -#define DRV_MODULE_RELDATE "August 2, 2007" +#define DRV_MODULE_VERSION "3.81" +#define DRV_MODULE_RELDATE "September 5, 2007" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -7127,6 +7127,10 @@ static int tg3_open(struct net_device *dev) } else if (pci_enable_msi(tp->pdev) == 0) { u32 msi_mode; + /* Hardware bug - MSI won't work if INTX disabled. */ + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) + pci_intx(tp->pdev, 1); + msi_mode = tr32(MSGINT_MODE); tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE); tp->tg3_flags2 |= TG3_FLG2_USING_MSI; @@ -12172,6 +12176,11 @@ static int tg3_resume(struct pci_dev *pdev) if (err) return err; + /* Hardware bug - MSI won't work if INTX disabled. */ + if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) && + (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) + pci_intx(tp->pdev, 1); + netif_device_attach(dev); tg3_full_lock(tp, 0); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 27e00b2d7b5..171ca712e52 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -285,7 +285,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } } -void __devinit pci_read_bridge_bases(struct pci_bus *child) +void pci_read_bridge_bases(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2d40f437b9f..7dcaa09b3c2 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -972,8 +972,8 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho * * The SMBus PCI Device can be activated by setting a bit in the ICH LPC * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it - * becomes necessary to do this tweak in two steps -- I've chosen the Host - * bridge as trigger. + * becomes necessary to do this tweak in two steps -- the chosen trigger + * is either the Host bridge (preferred) or on-board VGA controller. * * Note that we used to unhide the SMBus that way on Toshiba laptops * (Satellite A40 and Tecra M2) but then found that the thermal management @@ -1070,6 +1070,14 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x0058: /* Compaq Evo N620c */ asus_hides_smbus = 1; } + else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) + switch(dev->subsystem_device) { + case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ + /* Motherboard doesn't have Host bridge + * subvendor/subdevice IDs, therefore checking + * its on-board VGA controller */ + asus_hides_smbus = 1; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge ); @@ -1082,6 +1090,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, as DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge ); + static void asus_hides_smbus_lpc(struct pci_dev *dev) { u16 val; @@ -1099,12 +1109,14 @@ static void asus_hides_smbus_lpc(struct pci_dev *dev) printk(KERN_INFO "PCI: Enabled i801 SMBus device\n"); } } +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc ); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc ); diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 90755d4cdb9..6b0cf0c2a08 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -107,108 +107,6 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) "pnp: SB audio device quirk - increasing port range\n"); } -static int quirk_smc_fir_enabled(struct pnp_dev *dev) -{ - unsigned long firbase; - u8 bank, high, low, chip; - - if (!pnp_port_valid(dev, 1)) - return 0; - - firbase = pnp_port_start(dev, 1); - - /* Select register bank 3 */ - bank = inb(firbase + 7); - bank &= 0xf0; - bank |= 3; - outb(bank, firbase + 7); - - high = inb(firbase + 0); - low = inb(firbase + 1); - chip = inb(firbase + 2); - - /* This corresponds to the check in smsc_ircc_present() */ - if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2)) - return 1; - - return 0; -} - -static void quirk_smc_enable(struct pnp_dev *dev) -{ - struct resource fir, sir, irq; - - pnp_activate_dev(dev); - if (quirk_smc_fir_enabled(dev)) - return; - - /* - * Sometimes the BIOS claims the device is enabled, but it reports - * the wrong FIR resources or doesn't properly configure ISA or LPC - * bridges on the way to the device. - * - * HP nc6000 and nc8000/nw8000 laptops have known problems like - * this. Fortunately, they do fix things up if we auto-configure - * the device using its _PRS and _SRS methods. - */ - dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; " - "auto-configuring\n", dev->id->id, - (unsigned long)pnp_port_start(dev, 0), - (unsigned long)pnp_port_start(dev, 1)); - - pnp_disable_dev(dev); - pnp_init_resource_table(&dev->res); - pnp_auto_config_dev(dev); - pnp_activate_dev(dev); - if (quirk_smc_fir_enabled(dev)) { - dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", - (unsigned long)pnp_port_start(dev, 0), - (unsigned long)pnp_port_start(dev, 1)); - return; - } - - /* - * The Toshiba Portege 4000 _CRS reports the FIR region first, - * followed by the SIR region. The BIOS will configure the bridge, - * but only if we call _SRS with SIR first, then FIR. It also - * reports the IRQ as active high, when it is really active low. - */ - dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; " - "swapping SIR/FIR and reconfiguring\n", - (unsigned long)pnp_port_start(dev, 0), - (unsigned long)pnp_port_start(dev, 1)); - - /* - * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign - * these resources any more. - */ - fir = dev->res.port_resource[0]; - sir = dev->res.port_resource[1]; - fir.flags &= ~IORESOURCE_AUTO; - sir.flags &= ~IORESOURCE_AUTO; - - irq = dev->res.irq_resource[0]; - irq.flags &= ~IORESOURCE_AUTO; - irq.flags &= ~IORESOURCE_BITS; - irq.flags |= IORESOURCE_IRQ_LOWEDGE; - - pnp_disable_dev(dev); - dev->res.port_resource[0] = sir; - dev->res.port_resource[1] = fir; - dev->res.irq_resource[0] = irq; - pnp_activate_dev(dev); - - if (quirk_smc_fir_enabled(dev)) { - dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", - (unsigned long)pnp_port_start(dev, 0), - (unsigned long)pnp_port_start(dev, 1)); - return; - } - - dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and " - "email bjorn.helgaas@hp.com\n"); -} - /* * PnP Quirks * Cards or devices that need some tweaking due to incomplete resource info @@ -229,7 +127,6 @@ static struct pnp_fixup pnp_fixups[] = { {"CTL0043", quirk_sb16audio_resources}, {"CTL0044", quirk_sb16audio_resources}, {"CTL0045", quirk_sb16audio_resources}, - {"SMCf010", quirk_smc_enable}, {""} }; diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index 3b58d3d5d38..a6b572978dc 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -26,6 +26,7 @@ #include <linux/types.h> #include <linux/bcd.h> #include <linux/rtc-v3020.h> +#include <linux/delay.h> #include <asm/io.h> @@ -47,6 +48,7 @@ static void v3020_set_reg(struct v3020 *chip, unsigned char address, for (i = 0; i < 4; i++) { writel((tmp & 1) << chip->leftshift, chip->ioaddress); tmp >>= 1; + udelay(1); } /* Commands dont have data */ @@ -54,6 +56,7 @@ static void v3020_set_reg(struct v3020 *chip, unsigned char address, for (i = 0; i < 8; i++) { writel((data & 1) << chip->leftshift, chip->ioaddress); data >>= 1; + udelay(1); } } } @@ -66,12 +69,14 @@ static unsigned char v3020_get_reg(struct v3020 *chip, unsigned char address) for (i = 0; i < 4; i++) { writel((address & 1) << chip->leftshift, chip->ioaddress); address >>= 1; + udelay(1); } for (i = 0; i < 8; i++) { data >>= 1; if (readl(chip->ioaddress) & (1 << chip->leftshift)) data |= 0x80; + udelay(1); } return data; @@ -95,7 +100,7 @@ static int v3020_read_time(struct device *dev, struct rtc_time *dt) tmp = v3020_get_reg(chip, V3020_MONTH_DAY); dt->tm_mday = BCD2BIN(tmp); tmp = v3020_get_reg(chip, V3020_MONTH); - dt->tm_mon = BCD2BIN(tmp); + dt->tm_mon = BCD2BIN(tmp) - 1; tmp = v3020_get_reg(chip, V3020_WEEK_DAY); dt->tm_wday = BCD2BIN(tmp); tmp = v3020_get_reg(chip, V3020_YEAR); @@ -135,7 +140,7 @@ static int v3020_set_time(struct device *dev, struct rtc_time *dt) v3020_set_reg(chip, V3020_MINUTES, BIN2BCD(dt->tm_min)); v3020_set_reg(chip, V3020_HOURS, BIN2BCD(dt->tm_hour)); v3020_set_reg(chip, V3020_MONTH_DAY, BIN2BCD(dt->tm_mday)); - v3020_set_reg(chip, V3020_MONTH, BIN2BCD(dt->tm_mon)); + v3020_set_reg(chip, V3020_MONTH, BIN2BCD(dt->tm_mon + 1)); v3020_set_reg(chip, V3020_WEEK_DAY, BIN2BCD(dt->tm_wday)); v3020_set_reg(chip, V3020_YEAR, BIN2BCD(dt->tm_year % 100)); diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index ab5ec1feaf4..90aa53fc4f3 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -1503,7 +1503,7 @@ zfcp_gid_pn_buffers_alloc(struct zfcp_gid_pn_data **gid_pn, mempool_t *pool) data->ct.pool = pool; } } else { - data = kmalloc(sizeof(struct zfcp_gid_pn_data), GFP_ATOMIC); + data = kmem_cache_alloc(zfcp_data.gid_pn_cache, GFP_ATOMIC); } if (NULL == data) @@ -1531,7 +1531,7 @@ static void zfcp_gid_pn_buffers_free(struct zfcp_gid_pn_data *gid_pn) if (gid_pn->ct.pool) mempool_free(gid_pn, gid_pn->ct.pool); else - kfree(gid_pn); + kmem_cache_free(zfcp_data.gid_pn_cache, gid_pn); } /** diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 81daa8204bf..c6899efdc8f 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -640,13 +640,9 @@ int zfcp_qdio_sbals_from_scsicmnd(struct zfcp_fsf_req *fsf_req, unsigned long sbtype, struct scsi_cmnd *scsi_cmnd) { - if (scsi_sg_count(scsi_cmnd)) - return zfcp_qdio_sbals_from_sg(fsf_req, sbtype, - scsi_sglist(scsi_cmnd), - scsi_sg_count(scsi_cmnd), - ZFCP_MAX_SBALS_PER_REQ); - else - return 0; + return zfcp_qdio_sbals_from_sg(fsf_req, sbtype, scsi_sglist(scsi_cmnd), + scsi_sg_count(scsi_cmnd), + ZFCP_MAX_SBALS_PER_REQ); } /** diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 0acf6db0a08..ad7eb4a9261 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -764,7 +764,9 @@ zfcp_reset_fc_host_stats(struct Scsi_Host *shost) return; ret = zfcp_fsf_exchange_port_data(NULL, adapter, data); - if (ret == 0) { + if (ret) { + kfree(data); + } else { adapter->stats_reset = jiffies/HZ; old_data = adapter->stats_reset_data; adapter->stats_reset_data = data; /* finally freed in diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 5606d1e6297..efceed451b4 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -737,12 +737,19 @@ check_mgmt: */ conn->ctask = list_entry(conn->xmitqueue.next, struct iscsi_cmd_task, running); - if (conn->ctask->state == ISCSI_TASK_PENDING) { + switch (conn->ctask->state) { + case ISCSI_TASK_ABORTING: + break; + case ISCSI_TASK_PENDING: iscsi_prep_scsi_cmd_pdu(conn->ctask); conn->session->tt->init_cmd_task(conn->ctask); + /* fall through */ + default: + conn->ctask->state = ISCSI_TASK_RUNNING; + break; } - conn->ctask->state = ISCSI_TASK_RUNNING; list_move_tail(conn->xmitqueue.next, &conn->run_list); + rc = iscsi_xmit_ctask(conn); if (rc) goto again; @@ -1049,7 +1056,9 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, ctask->mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0); if (!ctask->mtask) { + spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + spin_lock_bh(&session->lock) debug_scsi("abort sent failure [itt 0x%x]\n", ctask->itt); return -EPERM; } @@ -1066,6 +1075,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, debug_scsi("abort set timeout [itt 0x%x]\n", ctask->itt); } spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); scsi_queue_work(session->host, &conn->xmitwork); /* @@ -1083,6 +1093,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, if (signal_pending(current)) flush_signals(current); del_timer_sync(&conn->tmabort_timer); + mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); return 0; } @@ -1158,31 +1169,45 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, __iscsi_put_ctask(ctask); } +static void iscsi_suspend_tx(struct iscsi_conn *conn) +{ + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); + scsi_flush_work(conn->session->host); +} + +static void iscsi_start_tx(struct iscsi_conn *conn) +{ + clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); + scsi_queue_work(conn->session->host, &conn->xmitwork); +} + int iscsi_eh_abort(struct scsi_cmnd *sc) { + struct Scsi_Host *host = sc->device->host; + struct iscsi_session *session = iscsi_hostdata(host->hostdata); struct iscsi_cmd_task *ctask; struct iscsi_conn *conn; - struct iscsi_session *session; int rc; + mutex_lock(&session->eh_mutex); + spin_lock_bh(&session->lock); /* * if session was ISCSI_STATE_IN_RECOVERY then we may not have * got the command. */ if (!sc->SCp.ptr) { debug_scsi("sc never reached iscsi layer or it completed.\n"); + spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); return SUCCESS; } ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; conn = ctask->conn; - session = conn->session; conn->eh_abort_cnt++; debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt); - spin_lock_bh(&session->lock); - /* * If we are not logged in or we have started a new session * then let the host reset code handle this @@ -1219,6 +1244,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) switch (conn->tmabort_state) { case TMABORT_SUCCESS: spin_unlock_bh(&session->lock); + iscsi_suspend_tx(conn); /* * clean up task if aborted. grab the recv lock as a writer */ @@ -1227,11 +1253,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) fail_command(conn, ctask, DID_ABORT << 16); spin_unlock(&session->lock); write_unlock_bh(conn->recv_lock); - /* - * make sure xmit thread is not still touching the - * ctask/scsi_cmnd - */ - scsi_flush_work(session->host); + iscsi_start_tx(conn); goto success_unlocked; case TMABORT_NOT_FOUND: if (!ctask->sc) { @@ -1251,12 +1273,14 @@ success: spin_unlock_bh(&session->lock); success_unlocked: debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt); + mutex_unlock(&session->eh_mutex); return SUCCESS; failed: spin_unlock_bh(&session->lock); failed_unlocked: debug_scsi("abort failed [sc %lx itt 0x%x]\n", (long)sc, ctask->itt); + mutex_unlock(&session->eh_mutex); return FAILED; } EXPORT_SYMBOL_GPL(iscsi_eh_abort); @@ -1403,6 +1427,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, session->max_cmdsn = initial_cmdsn + 1; session->max_r2t = 1; session->tt = iscsit; + mutex_init(&session->eh_mutex); /* initialize SCSI PDU commands pool */ if (iscsi_pool_init(&session->cmdpool, session->cmds_max, @@ -1736,9 +1761,22 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, { int old_stop_stage; + mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); if (conn->stop_stage == STOP_CONN_TERM) { spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); + return; + } + + /* + * The LLD either freed/unset the lock on us, or userspace called + * stop but did not create a proper connection (connection was never + * bound or it was unbound then stop was called). + */ + if (!conn->recv_lock) { + spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); return; } @@ -1755,9 +1793,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, old_stop_stage = conn->stop_stage; conn->stop_stage = flag; conn->c_stage = ISCSI_CONN_STOPPED; - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); spin_unlock_bh(&session->lock); - scsi_flush_work(session->host); + + iscsi_suspend_tx(conn); write_lock_bh(conn->recv_lock); set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); @@ -1786,6 +1824,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, fail_all_commands(conn); flush_control_queues(session, conn); spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); } void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 563d18f4ff5..c6680348b64 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -2050,21 +2050,18 @@ qla25xx_fw_dump_failed: void qla2x00_dump_regs(scsi_qla_host_t *ha) { + int i; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24; + uint16_t __iomem *mbx_reg; + + mbx_reg = IS_FWI2_CAPABLE(ha) ? ®24->mailbox0: + MAILBOX_REG(ha, reg, 0); printk("Mailbox registers:\n"); - printk("scsi(%ld): mbox 0 0x%04x \n", - ha->host_no, RD_MAILBOX_REG(ha, reg, 0)); - printk("scsi(%ld): mbox 1 0x%04x \n", - ha->host_no, RD_MAILBOX_REG(ha, reg, 1)); - printk("scsi(%ld): mbox 2 0x%04x \n", - ha->host_no, RD_MAILBOX_REG(ha, reg, 2)); - printk("scsi(%ld): mbox 3 0x%04x \n", - ha->host_no, RD_MAILBOX_REG(ha, reg, 3)); - printk("scsi(%ld): mbox 4 0x%04x \n", - ha->host_no, RD_MAILBOX_REG(ha, reg, 4)); - printk("scsi(%ld): mbox 5 0x%04x \n", - ha->host_no, RD_MAILBOX_REG(ha, reg, 5)); + for (i = 0; i < 6; i++) + printk("scsi(%ld): mbox %d 0x%04x \n", ha->host_no, i, + RD_REG_WORD(mbx_reg++)); } diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 27ae3a532a5..c1964866a42 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1502,7 +1502,6 @@ typedef struct { uint8_t node_name[WWN_SIZE]; uint8_t port_name[WWN_SIZE]; uint8_t fabric_port_name[WWN_SIZE]; - uint16_t fp_speeds; uint16_t fp_speed; } sw_info_t; diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index b06cbb8580d..a7e23583f89 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -295,6 +295,8 @@ qla2x00_gid_pt(scsi_qla_host_t *ha, sw_info_t *list) list[i].d_id.b.domain = gid_data->port_id[0]; list[i].d_id.b.area = gid_data->port_id[1]; list[i].d_id.b.al_pa = gid_data->port_id[2]; + memset(list[i].fabric_port_name, 0, WWN_SIZE); + list[i].fp_speed = PORT_SPEED_UNKNOWN; /* Last one exit. */ if (gid_data->control_byte & BIT_7) { @@ -1707,8 +1709,6 @@ qla2x00_gfpn_id(scsi_qla_host_t *ha, sw_info_t *list) for (i = 0; i < MAX_FIBRE_DEVICES; i++) { /* Issue GFPN_ID */ - memset(list[i].fabric_port_name, 0, WWN_SIZE); - /* Prepare common MS IOCB */ ms_pkt = ha->isp_ops->prep_ms_iocb(ha, GFPN_ID_REQ_SIZE, GFPN_ID_RSP_SIZE); @@ -1821,8 +1821,6 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list) for (i = 0; i < MAX_FIBRE_DEVICES; i++) { /* Issue GFPN_ID */ - list[i].fp_speeds = list[i].fp_speed = 0; - /* Prepare common MS IOCB */ ms_pkt = qla24xx_prep_ms_fm_iocb(ha, GPSC_REQ_SIZE, GPSC_RSP_SIZE); @@ -1858,9 +1856,21 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list) } rval = QLA_FUNCTION_FAILED; } else { - /* Save portname */ - list[i].fp_speeds = ct_rsp->rsp.gpsc.speeds; - list[i].fp_speed = ct_rsp->rsp.gpsc.speed; + /* Save port-speed */ + switch (be16_to_cpu(ct_rsp->rsp.gpsc.speed)) { + case BIT_15: + list[i].fp_speed = PORT_SPEED_1GB; + break; + case BIT_14: + list[i].fp_speed = PORT_SPEED_2GB; + break; + case BIT_13: + list[i].fp_speed = PORT_SPEED_4GB; + break; + case BIT_11: + list[i].fp_speed = PORT_SPEED_8GB; + break; + } DEBUG2_3(printk("scsi(%ld): GPSC ext entry - " "fpn %02x%02x%02x%02x%02x%02x%02x%02x speeds=%04x " @@ -1873,8 +1883,8 @@ qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list) list[i].fabric_port_name[5], list[i].fabric_port_name[6], list[i].fabric_port_name[7], - be16_to_cpu(list[i].fp_speeds), - be16_to_cpu(list[i].fp_speed))); + be16_to_cpu(ct_rsp->rsp.gpsc.speeds), + be16_to_cpu(ct_rsp->rsp.gpsc.speed))); } /* Last device exit. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 374abe19b54..1a058ec9bd0 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2079,17 +2079,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) } /* Base iIDMA settings on HBA port speed. */ - switch (ha->link_data_rate) { - case PORT_SPEED_1GB: - fcport->fp_speed = cpu_to_be16(BIT_15); - break; - case PORT_SPEED_2GB: - fcport->fp_speed = cpu_to_be16(BIT_14); - break; - case PORT_SPEED_4GB: - fcport->fp_speed = cpu_to_be16(BIT_13); - break; - } + fcport->fp_speed = ha->link_data_rate; qla2x00_update_fcport(ha, fcport); @@ -2130,38 +2120,25 @@ static void qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) { #define LS_UNKNOWN 2 - static char *link_speeds[5] = { "1", "2", "?", "4" }; + static char *link_speeds[5] = { "1", "2", "?", "4", "8" }; int rval; - uint16_t port_speed, mb[6]; + uint16_t mb[6]; if (!IS_IIDMA_CAPABLE(ha)) return; - switch (be16_to_cpu(fcport->fp_speed)) { - case BIT_15: - port_speed = PORT_SPEED_1GB; - break; - case BIT_14: - port_speed = PORT_SPEED_2GB; - break; - case BIT_13: - port_speed = PORT_SPEED_4GB; - break; - default: + if (fcport->fp_speed == PORT_SPEED_UNKNOWN) { DEBUG2(printk("scsi(%ld): %02x%02x%02x%02x%02x%02x%02x%02x -- " - "unsupported FM port operating speed (%04x).\n", + "unsupported FM port operating speed.\n", ha->host_no, fcport->port_name[0], fcport->port_name[1], fcport->port_name[2], fcport->port_name[3], fcport->port_name[4], fcport->port_name[5], - fcport->port_name[6], fcport->port_name[7], - be16_to_cpu(fcport->fp_speed))); - port_speed = PORT_SPEED_UNKNOWN; - break; - } - if (port_speed == PORT_SPEED_UNKNOWN) + fcport->port_name[6], fcport->port_name[7])); return; + } - rval = qla2x00_set_idma_speed(ha, fcport->loop_id, port_speed, mb); + rval = qla2x00_set_idma_speed(ha, fcport->loop_id, fcport->fp_speed, + mb); if (rval != QLA_SUCCESS) { DEBUG2(printk("scsi(%ld): Unable to adjust iIDMA " "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n", @@ -2169,12 +2146,12 @@ qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) fcport->port_name[2], fcport->port_name[3], fcport->port_name[4], fcport->port_name[5], fcport->port_name[6], fcport->port_name[7], rval, - port_speed, mb[0], mb[1])); + fcport->fp_speed, mb[0], mb[1])); } else { DEBUG2(qla_printk(KERN_INFO, ha, "iIDMA adjusted to %s GB/s on " "%02x%02x%02x%02x%02x%02x%02x%02x.\n", - link_speeds[port_speed], fcport->port_name[0], + link_speeds[fcport->fp_speed], fcport->port_name[0], fcport->port_name[1], fcport->port_name[2], fcport->port_name[3], fcport->port_name[4], fcport->port_name[5], fcport->port_name[6], @@ -3354,7 +3331,8 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) spin_lock_irqsave(&ha->hardware_lock, flags); - if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) { + if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha) && + !IS_QLA25XX(ha)) { /* * Disable SRAM, Instruction RAM and GP RAM * parity. @@ -3370,7 +3348,8 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) spin_lock_irqsave(&ha->hardware_lock, flags); - if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) { + if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha) && + !IS_QLA25XX(ha)) { /* Enable proper parity */ if (IS_QLA2300(ha)) /* SRAM parity */ diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 50539da467b..eecae9905ec 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -490,6 +490,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); ha->flags.gpsc_supported = 1; + ha->flags.management_server_logged_in = 0; break; case MBA_CHG_IN_CONNECTION: /* Change in connection mode */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 93c0c7e4f08..acca898ce0a 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1564,7 +1564,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) struct Scsi_Host *host; scsi_qla_host_t *ha; unsigned long flags = 0; - char pci_info[20]; + char pci_info[30]; char fw_str[30]; struct scsi_host_template *sht; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index dd1f8ceb79c..18095b9b76f 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.00-k2" +#define QLA2XXX_VERSION "8.02.00-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 64ff6a5f6af..81b52b7cca2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -611,7 +611,7 @@ config SERIAL_BFIN config SERIAL_BFIN_CONSOLE bool "Console on Blackfin serial port" - depends on SERIAL_BFIN + depends on SERIAL_BFIN=y select SERIAL_CORE_CONSOLE choice @@ -832,10 +832,10 @@ config SERIAL_MUX 4. Change the kernel command console parameter to: console=ttyB0 config SERIAL_MUX_CONSOLE - bool "Support for console on serial MUX" - depends on SERIAL_MUX + bool "Support for console on serial MUX" + depends on SERIAL_MUX=y select SERIAL_CORE_CONSOLE - default y + default y config PDC_CONSOLE bool "PDC software console support" diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c index 20125375501..2d6c08b3dbc 100644 --- a/drivers/serial/sb1250-duart.c +++ b/drivers/serial/sb1250-duart.c @@ -58,6 +58,12 @@ #define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) #define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) +#define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING + +#define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) +#define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) +#define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) + #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) #include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_int.h> diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index fcbf1b8a526..32cda77b31c 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -384,11 +384,8 @@ irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data) mpc83xx_spi->count -= 1; if (mpc83xx_spi->count) { - if (mpc83xx_spi->tx) { - u32 word = mpc83xx_spi->get_tx(mpc83xx_spi); - mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, - word); - } + u32 word = mpc83xx_spi->get_tx(mpc83xx_spi); + mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word); } else { complete(&mpc83xx_spi->done); } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index a1ad11d0c47..63b1243a913 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -60,7 +60,7 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids, dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE; spin_lock(&dynids->lock); - list_add_tail(&dynids->list, &dynid->node); + list_add_tail(&dynid->node, &dynids->list); spin_unlock(&dynids->lock); if (get_driver(driver)) { diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 9e467118dc9..7f17d0fd76c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -28,10 +28,16 @@ * devices is broken... */ static const struct usb_device_id usb_quirk_list[] = { + /* CBM - Flash disk */ + { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, /* Hewlett-Packard PhotoSmart 720 / PhotoSmart 935 (storage) */ { USB_DEVICE(0x03f0, 0x4002), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + /* SGS Thomson Microelectronics 4in1 card reader */ + { USB_DEVICE(0x0483, 0x0321), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */ { USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Benq S2W 3300U */ @@ -66,6 +72,19 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Ultima Electronics Corp.*/ { USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + /* Genesys USB-to-IDE */ + { USB_DEVICE(0x0503, 0x0702), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + /* USB Graphical LCD - EEH Datalink GmbH */ + { USB_DEVICE(0x060c, 0x04eb), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* M-Systems Flash Disk Pioneers */ + { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Agfa Snapscan1212u */ { USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Seagate RSS LLC */ @@ -87,6 +106,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, { USB_DEVICE(0x0fca, 0x0006), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Apple iPhone */ + { USB_DEVICE(0x05ac, 0x1290), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + /* SKYMEDI USB_DRIVE */ + { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ }; diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 9cd98e73dc1..ce4d2e09633 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -1691,14 +1691,12 @@ static int gs_setup_class(struct usb_gadget *gadget, switch (ctrl->bRequest) { case USB_CDC_REQ_SET_LINE_CODING: - ret = min(wLength, - (u16)sizeof(struct usb_cdc_line_coding)); - if (port) { - spin_lock(&port->port_lock); - memcpy(&port->port_line_coding, req->buf, ret); - spin_unlock(&port->port_lock); - } - ret = 0; + /* FIXME Submit req to read the data; have its completion + * handler copy that data to port->port_line_coding (iff + * it's valid) and maybe pass it on. Until then, fail. + */ + printk(KERN_WARNING "gs_setup: set_line_coding " + "unuspported\n"); break; case USB_CDC_REQ_GET_LINE_CODING: @@ -1713,11 +1711,18 @@ static int gs_setup_class(struct usb_gadget *gadget, break; case USB_CDC_REQ_SET_CONTROL_LINE_STATE: - ret = 0; + /* FIXME Submit req to read the data; have its completion + * handler use that to set the state (iff it's valid) and + * maybe pass it on. Until then, fail. + */ + printk(KERN_WARNING "gs_setup: set_control_line_state " + "unuspported\n"); break; default: - printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + printk(KERN_ERR "gs_setup: unknown class request, " + "type=%02x, request=%02x, value=%04x, " + "index=%04x, length=%d\n", ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); break; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 9f37ba44c13..b64ca91d9b0 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3404,6 +3404,7 @@ static void sisusb_disconnect(struct usb_interface *intf) } static struct usb_device_id sisusb_table [] = { + { USB_DEVICE(0x0711, 0x0550) }, { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index c08a38402b9..a47a24f8820 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -138,7 +138,7 @@ static void free_dynids(struct usb_serial_driver *drv) static struct driver_attribute drv_attrs[] = { __ATTR_NULL, }; -static inline void free_dynids(struct usb_driver *drv) +static inline void free_dynids(struct usb_serial_driver *drv) { } #endif diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1370c423d7c..2d045857b18 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -568,6 +568,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, + { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_olimex_quirk }, { }, /* Optional parameter entry */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index c70e1de6389..b57b90ae9f9 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -534,6 +534,14 @@ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4cb3c165742..a18659e0700 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -108,6 +108,7 @@ static int option_send_setup(struct usb_serial_port *port); #define HUAWEI_VENDOR_ID 0x12D1 #define HUAWEI_PRODUCT_E600 0x1001 #define HUAWEI_PRODUCT_E220 0x1003 +#define HUAWEI_PRODUCT_E220BIS 0x1004 #define NOVATELWIRELESS_VENDOR_ID 0x1410 #define DELL_VENDOR_ID 0x413C @@ -158,6 +159,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */ @@ -176,6 +178,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 833ada47fc5..64f3f66a7a3 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -817,21 +817,6 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, __FUNCTION__, port->number, cmd, arg); switch (cmd) { - case TCGETS: - if (kernel_termios_to_user_termios((struct ktermios __user *)arg, - port->tty->termios)) - return -EFAULT; - return 0; - - case TCSETS: - case TCSETSW: /* FIXME: this is not the same! */ - case TCSETSF: /* FIXME: this is not the same! */ - if (user_termios_to_kernel_termios(port->tty->termios, - (struct ktermios __user *)arg)) - return -EFAULT; - oti6858_set_termios(port, NULL); - return 0; - case TCFLSH: /* FIXME */ return 0; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2d92ce31018..c6b78ba815e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -348,6 +348,13 @@ UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Ortwin Glueck <odi@odi.ch> */ +UNUSUAL_DEV( 0x04b0, 0x0413, 0x0110, 0x0110, + "NIKON", + "NIKON DSC D40", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* BENQ DC5330 * Reported by Manuel Fombuena <mfombuena@ya.com> and * Frank Copeland <fjc@thingy.apana.org.au> */ @@ -897,6 +904,22 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> + * This USB MP3/AVI player device fails and disconnects if more than 128 + * sectors (64kB) are read/written in a single command, and may be present + * at least in the following products: + * "Magnex Digital Video Panel DVP 1800" + * "MP4 AIGO 4GB SLOT SD" + * "Teclast TL-C260 MP3" + * "i.Meizu PMP MP3/MP4" + * "Speed MV8 MP4 Audio Player" + */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100, + "RockChip", + "ROCK MP3", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + /* Reported by Olivier Blondeau <zeitoun@gmail.com> */ UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, "ATMEL", @@ -1393,6 +1416,13 @@ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), +/* Reported by Ricardo Barberis <ricardo@dattatec.com> */ +UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000, + "Sony Ericsson", + "P1i", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c index 16bc8d75e36..b21d0dec928 100644 --- a/drivers/video/intelfb/intelfbhw.c +++ b/drivers/video/intelfb/intelfbhw.c @@ -924,10 +924,10 @@ calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2, u32 *retn, u32 *re if (m > pll->max_m) m = pll->max_m - 1; for (testm = m - 1; testm <= m; testm++) { - f_out = calc_vclock3(index, m, n, p); + f_out = calc_vclock3(index, testm, n, p); if (splitm(index, testm, &m1, &m2)) { - WRN_MSG("cannot split m = %d\n", m); - n++; + WRN_MSG("cannot split m = %d\n", + testm); continue; } if (clock > f_out) diff --git a/fs/Kconfig b/fs/Kconfig index 58a0650293e..f9eed6d7906 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -441,9 +441,6 @@ config OCFS2_FS Note: Features which OCFS2 does not support yet: - extended attributes - - shared writeable mmap - - loopback is supported, but data written will not - be cluster coherent. - quotas - cluster aware flock - Directory change notification (F_NOTIFY) diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c index a3684dcc76e..6f8c96fb29e 100644 --- a/fs/afs/mntpt.c +++ b/fs/afs/mntpt.c @@ -235,8 +235,8 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd) err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts); switch (err) { case 0: - mntput(nd->mnt); dput(nd->dentry); + mntput(nd->mnt); nd->mnt = newmnt; nd->dentry = dget(newmnt->mnt_root); schedule_delayed_work(&afs_mntpt_expiry_timer, diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 22cfdd61c06..9537316a071 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2578,8 +2578,11 @@ static int ext3_release_dquot(struct dquot *dquot) handle = ext3_journal_start(dquot_to_inode(dquot), EXT3_QUOTA_DEL_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) + if (IS_ERR(handle)) { + /* Release dquot anyway to avoid endless cycle in dqput() */ + dquot_release(dquot); return PTR_ERR(handle); + } ret = dquot_release(dquot); err = ext3_journal_stop(handle); if (!ret) @@ -2712,6 +2715,12 @@ static ssize_t ext3_quota_write(struct super_block *sb, int type, struct buffer_head *bh; handle_t *handle = journal_current_handle(); + if (!handle) { + printk(KERN_WARNING "EXT3-fs: Quota write (off=%Lu, len=%Lu)" + " cancelled because transaction is not started.\n", + (unsigned long long)off, (unsigned long long)len); + return -EIO; + } mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); while (towrite > 0) { tocopy = sb->s_blocksize - offset < towrite ? diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4550b83ab1c..3c1397fa83d 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2698,8 +2698,11 @@ static int ext4_release_dquot(struct dquot *dquot) handle = ext4_journal_start(dquot_to_inode(dquot), EXT4_QUOTA_DEL_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) + if (IS_ERR(handle)) { + /* Release dquot anyway to avoid endless cycle in dqput() */ + dquot_release(dquot); return PTR_ERR(handle); + } ret = dquot_release(dquot); err = ext4_journal_stop(handle); if (!ret) @@ -2832,6 +2835,12 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type, struct buffer_head *bh; handle_t *handle = journal_current_handle(); + if (!handle) { + printk(KERN_WARNING "EXT4-fs: Quota write (off=%Lu, len=%Lu)" + " cancelled because transaction is not started.\n", + (unsigned long long)off, (unsigned long long)len); + return -EIO; + } mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); while (towrite > 0) { tocopy = sb->s_blocksize - offset < towrite ? diff --git a/fs/locks.c b/fs/locks.c index 50857d2d340..c795eaaf6c4 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -782,7 +782,7 @@ find_conflict: if (request->fl_flags & FL_ACCESS) goto out; locks_copy_lock(new_fl, request); - locks_insert_lock(&inode->i_flock, new_fl); + locks_insert_lock(before, new_fl); new_fl = NULL; error = 0; diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c index 0eb464a39aa..7011d62acfc 100644 --- a/fs/nfsd/nfsfh.c +++ b/fs/nfsd/nfsfh.c @@ -566,13 +566,23 @@ enum fsid_source fsid_source(struct svc_fh *fhp) case FSID_DEV: case FSID_ENCODE_DEV: case FSID_MAJOR_MINOR: - return FSIDSOURCE_DEV; + if (fhp->fh_export->ex_dentry->d_inode->i_sb->s_type->fs_flags + & FS_REQUIRES_DEV) + return FSIDSOURCE_DEV; + break; case FSID_NUM: - return FSIDSOURCE_FSID; - default: if (fhp->fh_export->ex_flags & NFSEXP_FSID) return FSIDSOURCE_FSID; - else - return FSIDSOURCE_UUID; + break; + default: + break; } + /* either a UUID type filehandle, or the filehandle doesn't + * match the export. + */ + if (fhp->fh_export->ex_flags & NFSEXP_FSID) + return FSIDSOURCE_FSID; + if (fhp->fh_export->ex_uuid) + return FSIDSOURCE_UUID; + return FSIDSOURCE_DEV; } diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index a0c2b253818..7867151ebb8 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -115,7 +115,8 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp, exp2 = rqst_exp_get_by_name(rqstp, mnt, mounts); if (IS_ERR(exp2)) { - err = PTR_ERR(exp2); + if (PTR_ERR(exp2) != -ENOENT) + err = PTR_ERR(exp2); dput(mounts); mntput(mnt); goto out; diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 4f517665c9a..778a850b463 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -5602,6 +5602,7 @@ static int ocfs2_do_truncate(struct ocfs2_super *osb, clusters_to_del; spin_unlock(&OCFS2_I(inode)->ip_lock); le32_add_cpu(&fe->i_clusters, -clusters_to_del); + inode->i_blocks = ocfs2_inode_sector_count(inode); status = ocfs2_trim_tree(inode, path, handle, tc, clusters_to_del, &delete_blk); diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 460d440310f..50cd8a20901 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -855,6 +855,7 @@ static int ocfs2_alloc_write_ctxt(struct ocfs2_write_ctxt **wcp, struct ocfs2_super *osb, loff_t pos, unsigned len, struct buffer_head *di_bh) { + u32 cend; struct ocfs2_write_ctxt *wc; wc = kzalloc(sizeof(struct ocfs2_write_ctxt), GFP_NOFS); @@ -862,7 +863,8 @@ static int ocfs2_alloc_write_ctxt(struct ocfs2_write_ctxt **wcp, return -ENOMEM; wc->w_cpos = pos >> osb->s_clustersize_bits; - wc->w_clen = ocfs2_clusters_for_bytes(osb->sb, len); + cend = (pos + len - 1) >> osb->s_clustersize_bits; + wc->w_clen = cend - wc->w_cpos + 1; get_bh(di_bh); wc->w_di_bh = di_bh; diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 4ffa715be09..7e34e66159c 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -314,7 +314,6 @@ static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb, } i_size_write(inode, new_i_size); - inode->i_blocks = ocfs2_align_bytes_to_sectors(new_i_size); inode->i_ctime = inode->i_mtime = CURRENT_TIME; di = (struct ocfs2_dinode *) fe_bh->b_data; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index f2fc9a795de..c034b5129c1 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -81,8 +81,15 @@ static struct dentry *ocfs2_debugfs_root = NULL; MODULE_AUTHOR("Oracle"); MODULE_LICENSE("GPL"); +struct mount_options +{ + unsigned long mount_opt; + unsigned int atime_quantum; + signed short slot; +}; + static int ocfs2_parse_options(struct super_block *sb, char *options, - unsigned long *mount_opt, s16 *slot, + struct mount_options *mopt, int is_remount); static void ocfs2_put_super(struct super_block *sb); static int ocfs2_mount_volume(struct super_block *sb); @@ -367,24 +374,23 @@ static int ocfs2_remount(struct super_block *sb, int *flags, char *data) { int incompat_features; int ret = 0; - unsigned long parsed_options; - s16 slot; + struct mount_options parsed_options; struct ocfs2_super *osb = OCFS2_SB(sb); - if (!ocfs2_parse_options(sb, data, &parsed_options, &slot, 1)) { + if (!ocfs2_parse_options(sb, data, &parsed_options, 1)) { ret = -EINVAL; goto out; } if ((osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) != - (parsed_options & OCFS2_MOUNT_HB_LOCAL)) { + (parsed_options.mount_opt & OCFS2_MOUNT_HB_LOCAL)) { ret = -EINVAL; mlog(ML_ERROR, "Cannot change heartbeat mode on remount\n"); goto out; } if ((osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK) != - (parsed_options & OCFS2_MOUNT_DATA_WRITEBACK)) { + (parsed_options.mount_opt & OCFS2_MOUNT_DATA_WRITEBACK)) { ret = -EINVAL; mlog(ML_ERROR, "Cannot change data mode on remount\n"); goto out; @@ -435,7 +441,9 @@ unlock_osb: /* Only save off the new mount options in case of a successful * remount. */ - osb->s_mount_opt = parsed_options; + osb->s_mount_opt = parsed_options.mount_opt; + osb->s_atime_quantum = parsed_options.atime_quantum; + osb->preferred_slot = parsed_options.slot; } out: return ret; @@ -547,8 +555,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) { struct dentry *root; int status, sector_size; - unsigned long parsed_opt; - s16 slot; + struct mount_options parsed_options; struct inode *inode = NULL; struct ocfs2_super *osb = NULL; struct buffer_head *bh = NULL; @@ -556,14 +563,14 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) mlog_entry("%p, %p, %i", sb, data, silent); - if (!ocfs2_parse_options(sb, data, &parsed_opt, &slot, 0)) { + if (!ocfs2_parse_options(sb, data, &parsed_options, 0)) { status = -EINVAL; goto read_super_error; } /* for now we only have one cluster/node, make sure we see it * in the heartbeat universe */ - if (parsed_opt & OCFS2_MOUNT_HB_LOCAL) { + if (parsed_options.mount_opt & OCFS2_MOUNT_HB_LOCAL) { if (!o2hb_check_local_node_heartbeating()) { status = -EINVAL; goto read_super_error; @@ -585,8 +592,9 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) } brelse(bh); bh = NULL; - osb->s_mount_opt = parsed_opt; - osb->preferred_slot = slot; + osb->s_mount_opt = parsed_options.mount_opt; + osb->s_atime_quantum = parsed_options.atime_quantum; + osb->preferred_slot = parsed_options.slot; sb->s_magic = OCFS2_SUPER_MAGIC; @@ -728,8 +736,7 @@ static struct file_system_type ocfs2_fs_type = { static int ocfs2_parse_options(struct super_block *sb, char *options, - unsigned long *mount_opt, - s16 *slot, + struct mount_options *mopt, int is_remount) { int status; @@ -738,8 +745,9 @@ static int ocfs2_parse_options(struct super_block *sb, mlog_entry("remount: %d, options: \"%s\"\n", is_remount, options ? options : "(none)"); - *mount_opt = 0; - *slot = OCFS2_INVALID_SLOT; + mopt->mount_opt = 0; + mopt->atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM; + mopt->slot = OCFS2_INVALID_SLOT; if (!options) { status = 1; @@ -749,7 +757,6 @@ static int ocfs2_parse_options(struct super_block *sb, while ((p = strsep(&options, ",")) != NULL) { int token, option; substring_t args[MAX_OPT_ARGS]; - struct ocfs2_super * osb = OCFS2_SB(sb); if (!*p) continue; @@ -757,10 +764,10 @@ static int ocfs2_parse_options(struct super_block *sb, token = match_token(p, tokens, args); switch (token) { case Opt_hb_local: - *mount_opt |= OCFS2_MOUNT_HB_LOCAL; + mopt->mount_opt |= OCFS2_MOUNT_HB_LOCAL; break; case Opt_hb_none: - *mount_opt &= ~OCFS2_MOUNT_HB_LOCAL; + mopt->mount_opt &= ~OCFS2_MOUNT_HB_LOCAL; break; case Opt_barrier: if (match_int(&args[0], &option)) { @@ -768,27 +775,27 @@ static int ocfs2_parse_options(struct super_block *sb, goto bail; } if (option) - *mount_opt |= OCFS2_MOUNT_BARRIER; + mopt->mount_opt |= OCFS2_MOUNT_BARRIER; else - *mount_opt &= ~OCFS2_MOUNT_BARRIER; + mopt->mount_opt &= ~OCFS2_MOUNT_BARRIER; break; case Opt_intr: - *mount_opt &= ~OCFS2_MOUNT_NOINTR; + mopt->mount_opt &= ~OCFS2_MOUNT_NOINTR; break; case Opt_nointr: - *mount_opt |= OCFS2_MOUNT_NOINTR; + mopt->mount_opt |= OCFS2_MOUNT_NOINTR; break; case Opt_err_panic: - *mount_opt |= OCFS2_MOUNT_ERRORS_PANIC; + mopt->mount_opt |= OCFS2_MOUNT_ERRORS_PANIC; break; case Opt_err_ro: - *mount_opt &= ~OCFS2_MOUNT_ERRORS_PANIC; + mopt->mount_opt &= ~OCFS2_MOUNT_ERRORS_PANIC; break; case Opt_data_ordered: - *mount_opt &= ~OCFS2_MOUNT_DATA_WRITEBACK; + mopt->mount_opt &= ~OCFS2_MOUNT_DATA_WRITEBACK; break; case Opt_data_writeback: - *mount_opt |= OCFS2_MOUNT_DATA_WRITEBACK; + mopt->mount_opt |= OCFS2_MOUNT_DATA_WRITEBACK; break; case Opt_atime_quantum: if (match_int(&args[0], &option)) { @@ -796,9 +803,7 @@ static int ocfs2_parse_options(struct super_block *sb, goto bail; } if (option >= 0) - osb->s_atime_quantum = option; - else - osb->s_atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM; + mopt->atime_quantum = option; break; case Opt_slot: option = 0; @@ -807,7 +812,7 @@ static int ocfs2_parse_options(struct super_block *sb, goto bail; } if (option) - *slot = (s16)option; + mopt->slot = (s16)option; break; default: mlog(ML_ERROR, diff --git a/fs/proc/inode.c b/fs/proc/inode.c index a5b0dfd89a1..0e4d37c93ee 100644 --- a/fs/proc/inode.c +++ b/fs/proc/inode.c @@ -11,6 +11,7 @@ #include <linux/string.h> #include <linux/stat.h> #include <linux/completion.h> +#include <linux/poll.h> #include <linux/file.h> #include <linux/limits.h> #include <linux/init.h> @@ -232,7 +233,7 @@ static ssize_t proc_reg_write(struct file *file, const char __user *buf, size_t static unsigned int proc_reg_poll(struct file *file, struct poll_table_struct *pts) { struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); - unsigned int rv = 0; + unsigned int rv = DEFAULT_POLLMASK; unsigned int (*poll)(struct file *, struct poll_table_struct *); spin_lock(&pde->pde_unload_lock); diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 5b68dd3f191..a005451930b 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -1915,8 +1915,11 @@ static int reiserfs_release_dquot(struct dquot *dquot) ret = journal_begin(&th, dquot->dq_sb, REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb)); - if (ret) + if (ret) { + /* Release dquot anyway to avoid endless cycle in dqput() */ + dquot_release(dquot); goto out; + } ret = dquot_release(dquot); err = journal_end(&th, dquot->dq_sb, @@ -2067,6 +2070,12 @@ static ssize_t reiserfs_quota_write(struct super_block *sb, int type, size_t towrite = len; struct buffer_head tmp_bh, *bh; + if (!current->journal_info) { + printk(KERN_WARNING "reiserfs: Quota write (off=%Lu, len=%Lu)" + " cancelled because transaction is not started.\n", + (unsigned long long)off, (unsigned long long)len); + return -EIO; + } mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); while (towrite > 0) { tocopy = sb->s_blocksize - offset < towrite ? @@ -2098,7 +2107,7 @@ static ssize_t reiserfs_quota_write(struct super_block *sb, int type, data += tocopy; blk++; } - out: +out: if (len == towrite) return err; if (inode->i_size < off + len - towrite) diff --git a/fs/select.c b/fs/select.c index a974082b082..46dca31c607 100644 --- a/fs/select.c +++ b/fs/select.c @@ -26,8 +26,6 @@ #include <asm/uaccess.h> -#define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM) - struct poll_table_page { struct poll_table_page * next; struct poll_table_entry * entry; diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index b4acc7f3c37..e6ea293f303 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -103,7 +103,7 @@ extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast); static inline int kmem_shake_allow(gfp_t gfp_mask) { - return (gfp_mask & __GFP_WAIT); + return (gfp_mask & __GFP_WAIT) != 0; } #endif /* __XFS_SUPPORT_KMEM_H__ */ diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index fd4105d662e..d9c40fe6419 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -652,7 +652,7 @@ xfs_probe_cluster( for (i = 0; i < pagevec_count(&pvec); i++) { struct page *page = pvec.pages[i]; - size_t pg_offset, len = 0; + size_t pg_offset, pg_len = 0; if (tindex == tlast) { pg_offset = @@ -665,16 +665,16 @@ xfs_probe_cluster( pg_offset = PAGE_CACHE_SIZE; if (page->index == tindex && !TestSetPageLocked(page)) { - len = xfs_probe_page(page, pg_offset, mapped); + pg_len = xfs_probe_page(page, pg_offset, mapped); unlock_page(page); } - if (!len) { + if (!pg_len) { done = 1; break; } - total += len; + total += pg_len; tindex++; } diff --git a/fs/xfs/linux-2.6/xfs_globals.c b/fs/xfs/linux-2.6/xfs_globals.c index bb72c3d4141..81565dea9af 100644 --- a/fs/xfs/linux-2.6/xfs_globals.c +++ b/fs/xfs/linux-2.6/xfs_globals.c @@ -46,7 +46,7 @@ xfs_param_t xfs_params = { .inherit_nosym = { 0, 0, 1 }, .rotorstep = { 1, 1, 255 }, .inherit_nodfrg = { 0, 1, 1 }, - .fstrm_timer = { 1, 50, 3600*100}, + .fstrm_timer = { 1, 30*100, 3600*100}, }; /* diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 2d274b23ade..6ff0f4de163 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -120,7 +120,8 @@ xfs_Gqm_init(void) * Initialize the dquot hash tables. */ udqhash = kmem_zalloc_greedy(&hsize, - XFS_QM_HASHSIZE_LOW, XFS_QM_HASHSIZE_HIGH, + XFS_QM_HASHSIZE_LOW * sizeof(xfs_dqhash_t), + XFS_QM_HASHSIZE_HIGH * sizeof(xfs_dqhash_t), KM_SLEEP | KM_MAYFAIL | KM_LARGE); gdqhash = kmem_zalloc(hsize, KM_SLEEP | KM_LARGE); hsize /= sizeof(xfs_dqhash_t); diff --git a/fs/xfs/support/debug.h b/fs/xfs/support/debug.h index a27a7c8c052..855da040864 100644 --- a/fs/xfs/support/debug.h +++ b/fs/xfs/support/debug.h @@ -34,10 +34,10 @@ extern void cmn_err(int, char *, ...) extern void assfail(char *expr, char *f, int l); #define ASSERT_ALWAYS(expr) \ - (unlikely((expr) != 0) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) + (unlikely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) #ifndef DEBUG -# define ASSERT(expr) ((void)0) +#define ASSERT(expr) ((void)0) #ifndef STATIC # define STATIC static noinline @@ -49,8 +49,10 @@ extern void assfail(char *expr, char *f, int l); #else /* DEBUG */ -# define ASSERT(expr) ASSERT_ALWAYS(expr) -# include <linux/random.h> +#include <linux/random.h> + +#define ASSERT(expr) \ + (unlikely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) #ifndef STATIC # define STATIC noinline diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index aea37df4aa6..26d09e2e1a7 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1975,7 +1975,6 @@ xfs_da_do_buf( error = mappedbno == -2 ? 0 : XFS_ERROR(EFSCORRUPTED); if (unlikely(error == EFSCORRUPTED)) { if (xfs_error_level >= XFS_ERRLEVEL_LOW) { - int i; cmn_err(CE_ALERT, "xfs_da_do_buf: bno %lld\n", (long long)bno); cmn_err(CE_ALERT, "dir: inode %lld\n", diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 9d4c4fbeb3e..9bfb69e1e88 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -2185,13 +2185,13 @@ xlog_state_do_callback( } cb = iclog->ic_callback; - while (cb != 0) { + while (cb) { iclog->ic_callback_tail = &(iclog->ic_callback); iclog->ic_callback = NULL; LOG_UNLOCK(log, s); /* perform callbacks in the order given */ - for (; cb != 0; cb = cb_next) { + for (; cb; cb = cb_next) { cb_next = cb->cb_next; cb->cb_func(cb->cb_arg, aborted); } @@ -2202,7 +2202,7 @@ xlog_state_do_callback( loopdidcallbacks++; funcdidcallbacks++; - ASSERT(iclog->ic_callback == 0); + ASSERT(iclog->ic_callback == NULL); if (!(iclog->ic_state & XLOG_STATE_IOERROR)) iclog->ic_state = XLOG_STATE_DIRTY; @@ -3242,10 +3242,10 @@ xlog_ticket_put(xlog_t *log, #else /* When we debug, it is easier if tickets are cycled */ ticket->t_next = NULL; - if (log->l_tail != 0) { + if (log->l_tail) { log->l_tail->t_next = ticket; } else { - ASSERT(log->l_freelist == 0); + ASSERT(log->l_freelist == NULL); log->l_freelist = ticket; } log->l_tail = ticket; @@ -3463,7 +3463,7 @@ xlog_verify_iclog(xlog_t *log, s = LOG_LOCK(log); icptr = log->l_iclog; for (i=0; i < log->l_iclog_bufs; i++) { - if (icptr == 0) + if (icptr == NULL) xlog_panic("xlog_verify_iclog: invalid ptr"); icptr = icptr->ic_next; } diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index fddbb091a86..8ae6e8e5f3d 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1366,7 +1366,7 @@ xlog_recover_add_to_cont_trans( int old_len; item = trans->r_itemq; - if (item == 0) { + if (item == NULL) { /* finish copying rest of trans header */ xlog_recover_add_item(&trans->r_itemq); ptr = (xfs_caddr_t) &trans->r_theader + @@ -1412,7 +1412,7 @@ xlog_recover_add_to_trans( if (!len) return 0; item = trans->r_itemq; - if (item == 0) { + if (item == NULL) { ASSERT(*(uint *)dp == XFS_TRANS_HEADER_MAGIC); if (len == sizeof(xfs_trans_header_t)) xlog_recover_add_item(&trans->r_itemq); @@ -1467,12 +1467,12 @@ xlog_recover_unlink_tid( xlog_recover_t *tp; int found = 0; - ASSERT(trans != 0); + ASSERT(trans != NULL); if (trans == *q) { *q = (*q)->r_next; } else { tp = *q; - while (tp != 0) { + while (tp) { if (tp->r_next == trans) { found = 1; break; @@ -1495,7 +1495,7 @@ xlog_recover_insert_item_backq( xlog_recover_item_t **q, xlog_recover_item_t *item) { - if (*q == 0) { + if (*q == NULL) { item->ri_prev = item->ri_next = item; *q = item; } else { @@ -1899,7 +1899,7 @@ xlog_recover_do_reg_buffer( break; nbits = xfs_contig_bits(data_map, map_size, bit); ASSERT(nbits > 0); - ASSERT(item->ri_buf[i].i_addr != 0); + ASSERT(item->ri_buf[i].i_addr != NULL); ASSERT(item->ri_buf[i].i_len % XFS_BLI_CHUNK == 0); ASSERT(XFS_BUF_COUNT(bp) >= ((uint)bit << XFS_BLI_SHIFT)+(nbits<<XFS_BLI_SHIFT)); diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h index 3769e6bd63b..33dca30a3c4 100644 --- a/include/asm-generic/termios.h +++ b/include/asm-generic/termios.h @@ -63,6 +63,8 @@ static inline int kernel_termios_to_user_termio(struct termio __user *termio, #define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) #endif /* __ARCH_TERMIO_GETPUT */ diff --git a/include/asm-m32r/assembler.h b/include/asm-m32r/assembler.h index 47041d19d4a..26351539b5f 100644 --- a/include/asm-m32r/assembler.h +++ b/include/asm-m32r/assembler.h @@ -52,27 +52,27 @@ .endm #if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104)) -#define STI(reg) STI_M reg - .macro STI_M reg +#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg + .macro ENABLE_INTERRUPTS reg setpsw #0x40 -> nop ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). .endm -#define CLI(reg) CLI_M reg - .macro CLI_M reg +#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg + .macro DISABLE_INTERRUPTS reg clrpsw #0x40 -> nop ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1). .endm #else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */ -#define STI(reg) STI_M reg - .macro STI_M reg +#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg + .macro ENABLE_INTERRUPTS reg mvfc \reg, psw or3 \reg, \reg, #0x0040 mvtc \reg, psw .endm -#define CLI(reg) CLI_M reg - .macro CLI_M reg +#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg + .macro DISABLE_INTERRUPTS reg mvfc \reg, psw and3 \reg, \reg, #0xffbf mvtc \reg, psw diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h index decfc59907c..214b44b4075 100644 --- a/include/asm-m32r/m32r.h +++ b/include/asm-m32r/m32r.h @@ -22,12 +22,26 @@ #include <asm/m32700ut/m32700ut_pld.h> #include <asm/m32700ut/m32700ut_lan.h> #include <asm/m32700ut/m32700ut_lcd.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE +#define M32R_INT0ICU_ISTS M32700UT_LAN_ICUISTS +#define M32R_INT0ICU_IRQ_BASE M32700UT_LAN_PLD_IRQ_BASE +#define M32R_INT2ICU_ISTS M32700UT_LCD_ICUISTS +#define M32R_INT2ICU_IRQ_BASE M32700UT_LCD_PLD_IRQ_BASE #endif /* CONFIG_PLAT_M32700UT */ #if defined(CONFIG_PLAT_OPSPUT) #include <asm/opsput/opsput_pld.h> #include <asm/opsput/opsput_lan.h> #include <asm/opsput/opsput_lcd.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE OPSPUT_PLD_IRQ_BASE +#define M32R_INT0ICU_ISTS OPSPUT_LAN_ICUISTS +#define M32R_INT0ICU_IRQ_BASE OPSPUT_LAN_PLD_IRQ_BASE +#define M32R_INT2ICU_ISTS OPSPUT_LCD_ICUISTS +#define M32R_INT2ICU_IRQ_BASE OPSPUT_LCD_PLD_IRQ_BASE #endif /* CONFIG_PLAT_OPSPUT */ #if defined(CONFIG_PLAT_MAPPI2) @@ -40,10 +54,16 @@ #if defined(CONFIG_PLAT_USRV) #include <asm/m32700ut/m32700ut_pld.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE #endif #if defined(CONFIG_PLAT_M32104UT) #include <asm/m32104ut/m32104ut_pld.h> +/* for ei_handler:linux/arch/m32r/kernel/entry.S */ +#define M32R_INT1ICU_ISTS PLD_ICUISTS +#define M32R_INT1ICU_IRQ_BASE M32104UT_PLD_IRQ_BASE #endif /* CONFIG_PLAT_M32104 */ /* diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h index fdbb60e6a0d..a30fe9c6414 100644 --- a/include/asm-m68k/unistd.h +++ b/include/asm-m68k/unistd.h @@ -313,10 +313,20 @@ #define __NR_tee 308 #define __NR_vmsplice 309 #define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 #ifdef __KERNEL__ -#define NR_syscalls 311 +#define NR_syscalls 321 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h index 82e03195f32..eb1b566793f 100644 --- a/include/asm-m68knommu/unistd.h +++ b/include/asm-m68knommu/unistd.h @@ -314,10 +314,20 @@ #define __NR_tee 308 #define __NR_vmsplice 309 #define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 #ifdef __KERNEL__ -#define NR_syscalls 311 +#define NR_syscalls 321 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index 918a4894b58..6a5fa32f615 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -172,6 +172,7 @@ ASMMACRO(tlb_probe_hazard, nop; nop; nop ) ASMMACRO(irq_enable_hazard, + _ssnop; _ssnop; _ssnop; ) ASMMACRO(irq_disable_hazard, nop; nop; nop diff --git a/include/asm-mips/ioctls.h b/include/asm-mips/ioctls.h index 92f6c36aac4..5097cbf183a 100644 --- a/include/asm-mips/ioctls.h +++ b/include/asm-mips/ioctls.h @@ -77,6 +77,10 @@ #define TIOCSBRK 0x5427 /* BSD compatibility */ #define TIOCCBRK 0x5428 /* BSD compatibility */ #define TIOCGSID 0x7416 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ diff --git a/include/asm-mips/mach-ocelot/mach-gt64120.h b/include/asm-mips/mach-ocelot/mach-gt64120.h deleted file mode 100644 index a62ecb53c75..00000000000 --- a/include/asm-mips/mach-ocelot/mach-gt64120.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H -#define _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H - -/* - * PCI address allocation - */ -#define GT_PCI_MEM_BASE (0x22000000UL) -#define GT_PCI_MEM_SIZE GT_DEF_PCI0_MEM0_SIZE -#define GT_PCI_IO_BASE (0x20000000UL) -#define GT_PCI_IO_SIZE GT_DEF_PCI0_IO_SIZE - -extern unsigned long gt64120_base; - -#define GT64120_BASE (gt64120_base) - -/* - * GT timer irq - */ -#define GT_TIMER 6 - -#endif /* _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H */ diff --git a/include/asm-mips/sibyte/bcm1480_regs.h b/include/asm-mips/sibyte/bcm1480_regs.h index 2738c1366f6..c34d36b6b8c 100644 --- a/include/asm-mips/sibyte/bcm1480_regs.h +++ b/include/asm-mips/sibyte/bcm1480_regs.h @@ -227,10 +227,15 @@ (A_BCM1480_DUART(chan) + \ BCM1480_DUART_CHANREG_SPACING * 3 + (reg)) +#define DUART_IMRISR_SPACING 0x20 +#define DUART_INCHNG_SPACING 0x10 + #define R_BCM1480_DUART_IMRREG(chan) \ (R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING) #define R_BCM1480_DUART_ISRREG(chan) \ (R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING) +#define R_BCM1480_DUART_INCHREG(chan) \ + (R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING) #define A_BCM1480_DUART_IMRREG(chan) \ (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan))) diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h index 5bfdc3b6451..c83c68444e8 100644 --- a/include/asm-mips/termbits.h +++ b/include/asm-mips/termbits.h @@ -164,6 +164,7 @@ struct ktermios { #define HUPCL 0002000 /* Hang up on last close. */ #define CLOCAL 0004000 /* Ignore modem status lines. */ #define CBAUDEX 0010000 +#define BOTHER 0010000 #define B57600 0010001 #define B115200 0010002 #define B230400 0010003 @@ -179,9 +180,11 @@ struct ktermios { #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CIBAUD 002003600000 /* input baud rate */ #define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ /* c_lflag bits */ #define ISIG 0000001 /* Enable signals. */ diff --git a/include/asm-mips/termios.h b/include/asm-mips/termios.h index 2ce07f4be36..a275661fa7e 100644 --- a/include/asm-mips/termios.h +++ b/include/asm-mips/termios.h @@ -122,8 +122,10 @@ struct termio { copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ }) -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) #endif /* defined(__KERNEL__) */ diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 8836c0f1f2f..5bde3980bf4 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -130,6 +130,7 @@ struct spu { u64 flags; u64 dar; u64 dsisr; + u64 class_0_pending; size_t ls_size; unsigned int slb_replace; struct mm_struct *mm; @@ -138,7 +139,6 @@ struct spu { unsigned long long timestamp; pid_t pid; pid_t tgid; - int class_0_pending; spinlock_t register_lock; void (* wbox_callback)(struct spu *spu); diff --git a/include/asm-um/elf-x86_64.h b/include/asm-um/elf-x86_64.h index bfe27aa2c9c..857471c49da 100644 --- a/include/asm-um/elf-x86_64.h +++ b/include/asm-um/elf-x86_64.h @@ -67,27 +67,27 @@ typedef struct { } elf_fpregset_t; } while (0) #define ELF_CORE_COPY_REGS(pr_reg, regs) \ - (pr_reg)[0] = (regs)->regs.gp[0]; \ - (pr_reg)[1] = (regs)->regs.gp[1]; \ - (pr_reg)[2] = (regs)->regs.gp[2]; \ - (pr_reg)[3] = (regs)->regs.gp[3]; \ - (pr_reg)[4] = (regs)->regs.gp[4]; \ - (pr_reg)[5] = (regs)->regs.gp[5]; \ - (pr_reg)[6] = (regs)->regs.gp[6]; \ - (pr_reg)[7] = (regs)->regs.gp[7]; \ - (pr_reg)[8] = (regs)->regs.gp[8]; \ - (pr_reg)[9] = (regs)->regs.gp[9]; \ - (pr_reg)[10] = (regs)->regs.gp[10]; \ - (pr_reg)[11] = (regs)->regs.gp[11]; \ - (pr_reg)[12] = (regs)->regs.gp[12]; \ - (pr_reg)[13] = (regs)->regs.gp[13]; \ - (pr_reg)[14] = (regs)->regs.gp[14]; \ - (pr_reg)[15] = (regs)->regs.gp[15]; \ - (pr_reg)[16] = (regs)->regs.gp[16]; \ - (pr_reg)[17] = (regs)->regs.gp[17]; \ - (pr_reg)[18] = (regs)->regs.gp[18]; \ - (pr_reg)[19] = (regs)->regs.gp[19]; \ - (pr_reg)[20] = (regs)->regs.gp[20]; \ + (pr_reg)[0] = (regs)->regs.skas.regs[0]; \ + (pr_reg)[1] = (regs)->regs.skas.regs[1]; \ + (pr_reg)[2] = (regs)->regs.skas.regs[2]; \ + (pr_reg)[3] = (regs)->regs.skas.regs[3]; \ + (pr_reg)[4] = (regs)->regs.skas.regs[4]; \ + (pr_reg)[5] = (regs)->regs.skas.regs[5]; \ + (pr_reg)[6] = (regs)->regs.skas.regs[6]; \ + (pr_reg)[7] = (regs)->regs.skas.regs[7]; \ + (pr_reg)[8] = (regs)->regs.skas.regs[8]; \ + (pr_reg)[9] = (regs)->regs.skas.regs[9]; \ + (pr_reg)[10] = (regs)->regs.skas.regs[10]; \ + (pr_reg)[11] = (regs)->regs.skas.regs[11]; \ + (pr_reg)[12] = (regs)->regs.skas.regs[12]; \ + (pr_reg)[13] = (regs)->regs.skas.regs[13]; \ + (pr_reg)[14] = (regs)->regs.skas.regs[14]; \ + (pr_reg)[15] = (regs)->regs.skas.regs[15]; \ + (pr_reg)[16] = (regs)->regs.skas.regs[16]; \ + (pr_reg)[17] = (regs)->regs.skas.regs[17]; \ + (pr_reg)[18] = (regs)->regs.skas.regs[18]; \ + (pr_reg)[19] = (regs)->regs.skas.regs[19]; \ + (pr_reg)[20] = (regs)->regs.skas.regs[20]; \ (pr_reg)[21] = current->thread.arch.fs; \ (pr_reg)[22] = 0; \ (pr_reg)[23] = 0; \ diff --git a/include/linux/aer.h b/include/linux/aer.h index 509656286e5..bcf236d825e 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -15,11 +15,26 @@ extern int pci_disable_pcie_error_reporting(struct pci_dev *dev); extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev); extern int pci_cleanup_aer_correct_error_status(struct pci_dev *dev); #else -#define pci_enable_pcie_error_reporting(dev) (-EINVAL) -#define pci_find_aer_capability(dev) (0) -#define pci_disable_pcie_error_reporting(dev) (-EINVAL) -#define pci_cleanup_aer_uncorrect_error_status(dev) (-EINVAL) -#define pci_cleanup_aer_correct_error_status(dev) (-EINVAL) +static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) +{ + return -EINVAL; +} +static inline int pci_find_aer_capability(struct pci_dev *dev) +{ + return 0; +} +static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev) +{ + return -EINVAL; +} +static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) +{ + return -EINVAL; +} +static inline int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) +{ + return -EINVAL; +} #endif #endif //_AER_H_ diff --git a/include/linux/ide.h b/include/linux/ide.h index c792b4fd158..b9f66c10caa 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1378,6 +1378,19 @@ static inline int ide_dev_has_iordy(struct hd_driveid *id) return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0; } +static inline int ide_dev_is_sata(struct hd_driveid *id) +{ + /* + * See if word 93 is 0 AND drive is at least ATA-5 compatible + * verifying that word 80 by casting it to a signed type -- + * this trick allows us to filter out the reserved values of + * 0x0000 and 0xffff along with the earlier ATA revisions... + */ + if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020) + return 1; + return 0; +} + u8 ide_dump_status(ide_drive_t *, const char *, u8); typedef struct ide_pio_timings_s { diff --git a/include/linux/input.h b/include/linux/input.h index cf2b5619aa1..36e00aa6f03 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -558,6 +558,8 @@ struct input_absinfo { #define KEY_BRL_DOT6 0x1f6 #define KEY_BRL_DOT7 0x1f7 #define KEY_BRL_DOT8 0x1f8 +#define KEY_BRL_DOT9 0x1f9 +#define KEY_BRL_DOT10 0x1fa /* We avoid low common keys in module aliases so they don't get huge. */ #define KEY_MIN_INTERESTING KEY_MUTE diff --git a/include/linux/kernel.h b/include/linux/kernel.h index f592df74b3c..47160fe378c 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -34,6 +34,7 @@ extern const char linux_proc_banner[]; #define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1) #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h index de76843bbe8..7ddbc30aa8e 100644 --- a/include/linux/keyboard.h +++ b/include/linux/keyboard.h @@ -437,8 +437,10 @@ extern unsigned short plain_map[NR_KEYS]; #define K_BRL_DOT6 K(KT_BRL, 6) #define K_BRL_DOT7 K(KT_BRL, 7) #define K_BRL_DOT8 K(KT_BRL, 8) +#define K_BRL_DOT9 K(KT_BRL, 9) +#define K_BRL_DOT10 K(KT_BRL, 10) -#define NR_BRL 9 +#define NR_BRL 11 #define MAX_DIACR 256 #endif diff --git a/include/linux/leds.h b/include/linux/leds.h index 421175092ee..dc1178f6184 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -13,6 +13,7 @@ #define __LINUX_LEDS_H_INCLUDED #include <linux/list.h> +#include <linux/spinlock.h> struct device; /* diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 0eed0b7ab2d..1dd075eda59 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -88,9 +88,8 @@ struct nf_sockopt_ops int (*compat_get)(struct sock *sk, int optval, void __user *user, int *len); - /* Number of users inside set() or get(). */ - unsigned int use; - struct task_struct *cleanup_task; + /* Use the module struct to lock set/get code in place */ + struct module *owner; }; /* Each queued (to userspace) skbuff has one of these. */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 17168f3cc73..55f307ffbf9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1343,6 +1343,7 @@ #define PCI_DEVICE_ID_VIA_8231_4 0x8235 #define PCI_DEVICE_ID_VIA_8365_1 0x8305 #define PCI_DEVICE_ID_VIA_CX700 0x8324 +#define PCI_DEVICE_ID_VIA_VX800 0x8353 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 @@ -2292,6 +2293,8 @@ #define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599 #define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a #define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e +#define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031 +#define PCI_DEVICE_ID_INTEL_TOLAPAI_1 0x5032 #define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 #define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 #define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020 diff --git a/include/linux/poll.h b/include/linux/poll.h index 27690798623..16d813b364e 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -21,6 +21,8 @@ #define WQUEUES_STACK_ALLOC (MAX_STACK_ALLOC - FRONTEND_STACK_ALLOC) #define N_INLINE_POLL_ENTRIES (WQUEUES_STACK_ALLOC / sizeof(struct poll_table_entry)) +#define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM) + struct poll_table_struct; /* diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 007d442412e..b4b31132618 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -205,6 +205,13 @@ struct iscsi_queue { }; struct iscsi_session { + /* + * Syncs up the scsi eh thread with the iscsi eh thread when sending + * task management functions. This must be taken before the session + * and recv lock. + */ + struct mutex eh_mutex; + /* iSCSI session-wide sequencing */ uint32_t cmdsn; uint32_t exp_cmdsn; diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c index f7921360efa..7e52eb051f2 100644 --- a/kernel/futex_compat.c +++ b/kernel/futex_compat.c @@ -61,10 +61,10 @@ void compat_exit_robust_list(struct task_struct *curr) if (fetch_robust_entry(&upending, &pending, &head->list_op_pending, &pip)) return; - if (upending) + if (pending) handle_futex_death((void __user *)pending + futex_offset, curr, pip); - while (compat_ptr(uentry) != &head->list) { + while (entry != (struct robust_list __user *) &head->list) { /* * A pending lock might already be on the list, so * dont process it twice: diff --git a/kernel/kmod.c b/kernel/kmod.c index 9809cc1f33d..c6a4f8aebeb 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -505,7 +505,7 @@ int call_usermodehelper_pipe(char *path, char **argv, char **envp, if (ret < 0) goto out; - return call_usermodehelper_exec(sub_info, 1); + return call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); out: call_usermodehelper_freeinfo(sub_info); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 82a558b655d..3eca7a55f2e 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -233,6 +233,7 @@ int ptrace_detach(struct task_struct *child, unsigned int data) /* Architecture-specific hardware disable .. */ ptrace_disable(child); + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); write_lock_irq(&tasklist_lock); /* protect against de_thread()->release_task() */ diff --git a/kernel/sched.c b/kernel/sched.c index b533d6db78a..deeb1f8e0c3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -668,7 +668,7 @@ static u64 div64_likely32(u64 divident, unsigned long divisor) /* * Shift right and round: */ -#define RSR(x, y) (((x) + (1UL << ((y) - 1))) >> (y)) +#define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y)) static unsigned long calc_delta_mine(unsigned long delta_exec, unsigned long weight, @@ -684,10 +684,10 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight, * Check whether we'd overflow the 64-bit multiplication: */ if (unlikely(tmp > WMULT_CONST)) - tmp = RSR(RSR(tmp, WMULT_SHIFT/2) * lw->inv_weight, + tmp = SRR(SRR(tmp, WMULT_SHIFT/2) * lw->inv_weight, WMULT_SHIFT/2); else - tmp = RSR(tmp * lw->inv_weight, WMULT_SHIFT); + tmp = SRR(tmp * lw->inv_weight, WMULT_SHIFT); return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX); } @@ -858,7 +858,6 @@ static void dec_nr_running(struct task_struct *p, struct rq *rq) static void set_load_weight(struct task_struct *p) { - task_rq(p)->cfs.wait_runtime -= p->se.wait_runtime; p->se.wait_runtime = 0; if (task_has_rt_policy(p)) { @@ -2512,7 +2511,7 @@ group_next: * a think about bumping its value to force at least one task to be * moved */ - if (*imbalance + SCHED_LOAD_SCALE_FUZZ < busiest_load_per_task) { + if (*imbalance < busiest_load_per_task) { unsigned long tmp, pwr_now, pwr_move; unsigned int imbn; @@ -2564,10 +2563,8 @@ small_imbalance: pwr_move /= SCHED_LOAD_SCALE; /* Move if we gain throughput */ - if (pwr_move <= pwr_now) - goto out_balanced; - - *imbalance = busiest_load_per_task; + if (pwr_move > pwr_now) + *imbalance = busiest_load_per_task; } return busiest; diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index ab18f45f2ab..c3ee38bd342 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -283,4 +283,5 @@ void proc_sched_set_task(struct task_struct *p) p->se.wait_runtime_overruns = p->se.wait_runtime_underruns = 0; #endif p->se.sum_exec_runtime = 0; + p->se.prev_sum_exec_runtime = 0; } diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ce39282d9c0..892616bf2c7 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -194,6 +194,8 @@ __enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) update_load_add(&cfs_rq->load, se->load.weight); cfs_rq->nr_running++; se->on_rq = 1; + + schedstat_add(cfs_rq, wait_runtime, se->wait_runtime); } static inline void @@ -205,6 +207,8 @@ __dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) update_load_sub(&cfs_rq->load, se->load.weight); cfs_rq->nr_running--; se->on_rq = 0; + + schedstat_add(cfs_rq, wait_runtime, -se->wait_runtime); } static inline struct rb_node *first_fair(struct cfs_rq *cfs_rq) @@ -291,7 +295,7 @@ niced_granularity(struct sched_entity *curr, unsigned long granularity) /* * It will always fit into 'long': */ - return (long) (tmp >> WMULT_SHIFT); + return (long) (tmp >> (WMULT_SHIFT-NICE_0_SHIFT)); } static inline void @@ -574,7 +578,6 @@ static void __enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se) prev_runtime = se->wait_runtime; __add_wait_runtime(cfs_rq, se, delta_fair); - schedstat_add(cfs_rq, wait_runtime, se->wait_runtime); delta_fair = se->wait_runtime - prev_runtime; /* @@ -662,7 +665,6 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) if (tsk->state & TASK_UNINTERRUPTIBLE) se->block_start = rq_of(cfs_rq)->clock; } - cfs_rq->wait_runtime -= se->wait_runtime; #endif } __dequeue_entity(cfs_rq, se); @@ -671,22 +673,39 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) /* * Preempt the current task with a newly woken task if needed: */ -static int +static void __check_preempt_curr_fair(struct cfs_rq *cfs_rq, struct sched_entity *se, struct sched_entity *curr, unsigned long granularity) { s64 __delta = curr->fair_key - se->fair_key; + unsigned long ideal_runtime, delta_exec; + + /* + * ideal_runtime is compared against sum_exec_runtime, which is + * walltime, hence do not scale. + */ + ideal_runtime = max(sysctl_sched_latency / cfs_rq->nr_running, + (unsigned long)sysctl_sched_min_granularity); + + /* + * If we executed more than what the latency constraint suggests, + * reduce the rescheduling granularity. This way the total latency + * of how much a task is not scheduled converges to + * sysctl_sched_latency: + */ + delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime; + if (delta_exec > ideal_runtime) + granularity = 0; /* * Take scheduling granularity into account - do not * preempt the current task unless the best task has * a larger than sched_granularity fairness advantage: + * + * scale granularity as key space is in fair_clock. */ - if (__delta > niced_granularity(curr, granularity)) { + if (__delta > niced_granularity(curr, granularity)) resched_task(rq_of(cfs_rq)->curr); - return 1; - } - return 0; } static inline void @@ -702,6 +721,7 @@ set_next_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) update_stats_wait_end(cfs_rq, se); update_stats_curr_start(cfs_rq, se); set_cfs_rq_curr(cfs_rq, se); + se->prev_sum_exec_runtime = se->sum_exec_runtime; } static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) @@ -731,7 +751,6 @@ static void put_prev_entity(struct cfs_rq *cfs_rq, struct sched_entity *prev) static void entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) { - unsigned long gran, ideal_runtime, delta_exec; struct sched_entity *next; /* @@ -748,22 +767,8 @@ static void entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) if (next == curr) return; - gran = sched_granularity(cfs_rq); - ideal_runtime = niced_granularity(curr, - max(sysctl_sched_latency / cfs_rq->nr_running, - (unsigned long)sysctl_sched_min_granularity)); - /* - * If we executed more than what the latency constraint suggests, - * reduce the rescheduling granularity. This way the total latency - * of how much a task is not scheduled converges to - * sysctl_sched_latency: - */ - delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime; - if (delta_exec > ideal_runtime) - gran = 0; - - if (__check_preempt_curr_fair(cfs_rq, next, curr, gran)) - curr->prev_sum_exec_runtime = curr->sum_exec_runtime; + __check_preempt_curr_fair(cfs_rq, next, curr, + sched_granularity(cfs_rq)); } /************************************************** @@ -1121,10 +1126,8 @@ static void task_new_fair(struct rq *rq, struct task_struct *p) * The statistical average of wait_runtime is about * -granularity/2, so initialize the task with that: */ - if (sysctl_sched_features & SCHED_FEAT_START_DEBIT) { + if (sysctl_sched_features & SCHED_FEAT_START_DEBIT) se->wait_runtime = -(sched_granularity(cfs_rq) / 2); - schedstat_add(cfs_rq, wait_runtime, se->wait_runtime); - } __enqueue_entity(cfs_rq, se); } diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index cd91237dbfe..de6a2d6b3eb 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -226,7 +226,7 @@ static void sync_cmos_clock(unsigned long dummy) static void notify_cmos_timer(void) { - if (no_sync_cmos_clock) + if (!no_sync_cmos_clock) mod_timer(&sync_cmos_timer, jiffies + 1); } diff --git a/mm/slub.c b/mm/slub.c index 7defe84e6bd..addb20a6d67 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -986,7 +986,9 @@ out: __setup("slub_debug", setup_slub_debug); -static void kmem_cache_open_debug_check(struct kmem_cache *s) +static unsigned long kmem_cache_flags(unsigned long objsize, + unsigned long flags, const char *name, + void (*ctor)(void *, struct kmem_cache *, unsigned long)) { /* * The page->offset field is only 16 bit wide. This is an offset @@ -1000,19 +1002,21 @@ static void kmem_cache_open_debug_check(struct kmem_cache *s) * Debugging or ctor may create a need to move the free * pointer. Fail if this happens. */ - if (s->objsize >= 65535 * sizeof(void *)) { - BUG_ON(s->flags & (SLAB_RED_ZONE | SLAB_POISON | + if (objsize >= 65535 * sizeof(void *)) { + BUG_ON(flags & (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | SLAB_DESTROY_BY_RCU)); - BUG_ON(s->ctor); - } - else + BUG_ON(ctor); + } else { /* * Enable debugging if selected on the kernel commandline. */ if (slub_debug && (!slub_debug_slabs || - strncmp(slub_debug_slabs, s->name, + strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs)) == 0)) - s->flags |= slub_debug; + flags |= slub_debug; + } + + return flags; } #else static inline void setup_object_debug(struct kmem_cache *s, @@ -1029,7 +1033,12 @@ static inline int slab_pad_check(struct kmem_cache *s, struct page *page) static inline int check_object(struct kmem_cache *s, struct page *page, void *object, int active) { return 1; } static inline void add_full(struct kmem_cache_node *n, struct page *page) {} -static inline void kmem_cache_open_debug_check(struct kmem_cache *s) {} +static inline unsigned long kmem_cache_flags(unsigned long objsize, + unsigned long flags, const char *name, + void (*ctor)(void *, struct kmem_cache *, unsigned long)) +{ + return flags; +} #define slub_debug 0 #endif /* @@ -2088,9 +2097,8 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags, s->name = name; s->ctor = ctor; s->objsize = size; - s->flags = flags; s->align = align; - kmem_cache_open_debug_check(s); + s->flags = kmem_cache_flags(size, flags, name, ctor); if (!calculate_sizes(s)) goto error; @@ -2660,7 +2668,7 @@ static int slab_unmergeable(struct kmem_cache *s) } static struct kmem_cache *find_mergeable(size_t size, - size_t align, unsigned long flags, + size_t align, unsigned long flags, const char *name, void (*ctor)(void *, struct kmem_cache *, unsigned long)) { struct kmem_cache *s; @@ -2674,6 +2682,7 @@ static struct kmem_cache *find_mergeable(size_t size, size = ALIGN(size, sizeof(void *)); align = calculate_alignment(flags, align, size); size = ALIGN(size, align); + flags = kmem_cache_flags(size, flags, name, NULL); list_for_each_entry(s, &slab_caches, list) { if (slab_unmergeable(s)) @@ -2682,8 +2691,7 @@ static struct kmem_cache *find_mergeable(size_t size, if (size > s->size) continue; - if (((flags | slub_debug) & SLUB_MERGE_SAME) != - (s->flags & SLUB_MERGE_SAME)) + if ((flags & SLUB_MERGE_SAME) != (s->flags & SLUB_MERGE_SAME)) continue; /* * Check if alignment is compatible. @@ -2707,7 +2715,7 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, struct kmem_cache *s; down_write(&slub_lock); - s = find_mergeable(size, align, flags, ctor); + s = find_mergeable(size, align, flags, name, ctor); if (s) { s->refcount++; /* diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 63caa414945..18e3afc964d 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -183,6 +183,7 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt) { struct sk_buff *skb; __le16 param; + __u8 flt_type; BT_DBG("%s %ld", hdev->name, opt); @@ -233,11 +234,8 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt) /* Optional initialization */ /* Clear Event Filters */ - { - struct hci_cp_set_event_flt cp; - cp.flt_type = HCI_FLT_CLEAR_ALL; - hci_send_cmd(hdev, OGF_HOST_CTL, OCF_SET_EVENT_FLT, sizeof(cp), &cp); - } + flt_type = HCI_FLT_CLEAR_ALL; + hci_send_cmd(hdev, OGF_HOST_CTL, OCF_SET_EVENT_FLT, 1, &flt_type); /* Page timeout ~20 secs */ param = cpu_to_le16(0x8000); diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 1dae3dfc66a..5ccea5fbd23 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -37,6 +37,7 @@ #include <linux/skbuff.h> #include <linux/workqueue.h> #include <linux/interrupt.h> +#include <linux/compat.h> #include <linux/socket.h> #include <linux/ioctl.h> #include <net/sock.h> @@ -70,15 +71,15 @@ static struct hci_sec_filter hci_sec_filter = { { { 0x0 }, /* OGF_LINK_CTL */ - { 0xbe000006, 0x00000001, 0x000000, 0x00 }, + { 0xbe000006, 0x00000001, 0x00000000, 0x00 }, /* OGF_LINK_POLICY */ - { 0x00005200, 0x00000000, 0x000000, 0x00 }, + { 0x00005200, 0x00000000, 0x00000000, 0x00 }, /* OGF_HOST_CTL */ - { 0xaab00200, 0x2b402aaa, 0x020154, 0x00 }, + { 0xaab00200, 0x2b402aaa, 0x05220154, 0x00 }, /* OGF_INFO_PARAM */ - { 0x000002be, 0x00000000, 0x000000, 0x00 }, + { 0x000002be, 0x00000000, 0x00000000, 0x00 }, /* OGF_STATUS_PARAM */ - { 0x000000ea, 0x00000000, 0x000000, 0x00 } + { 0x000000ea, 0x00000000, 0x00000000, 0x00 } } }; @@ -342,9 +343,24 @@ static inline void hci_sock_cmsg(struct sock *sk, struct msghdr *msg, struct sk_ if (mask & HCI_CMSG_TSTAMP) { struct timeval tv; + void *data; + int len; skb_get_timestamp(skb, &tv); - put_cmsg(msg, SOL_HCI, HCI_CMSG_TSTAMP, sizeof(tv), &tv); + + data = &tv; + len = sizeof(tv); +#ifdef CONFIG_COMPAT + if (msg->msg_flags & MSG_CMSG_COMPAT) { + struct compat_timeval ctv; + ctv.tv_sec = tv.tv_sec; + ctv.tv_usec = tv.tv_usec; + data = &ctv; + len = sizeof(ctv); + } +#endif + + put_cmsg(msg, SOL_HCI, HCI_CMSG_TSTAMP, len, data); } } diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 4169a2a89a3..6018d0e5193 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1513,6 +1513,7 @@ static struct nf_sockopt_ops ebt_sockopts = .get_optmin = EBT_BASE_CTL, .get_optmax = EBT_SO_GET_MAX + 1, .get = do_ebt_get_ctl, + .owner = THIS_MODULE, }; static int __init ebtables_init(void) diff --git a/net/core/datagram.c b/net/core/datagram.c index cb056f47612..029b93e246b 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -450,6 +450,9 @@ int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb, __wsum csum; int chunk = skb->len - hlen; + if (!chunk) + return 0; + /* Skip filled elements. * Pretty silly, look at memcpy_toiovec, though 8) */ diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c index fa6604fcf0e..8def68209ed 100644 --- a/net/decnet/dn_dev.c +++ b/net/decnet/dn_dev.c @@ -814,7 +814,7 @@ static int dn_nl_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) for (ifa = dn_db->ifa_list, dn_idx = 0; ifa; ifa = ifa->ifa_next, dn_idx++) { if (dn_idx < skip_naddr) - goto cont; + continue; if (dn_nl_fill_ifaddr(skb, ifa, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, RTM_NEWADDR, diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 5b77bdaa57d..5dbe5803b7d 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1193,7 +1193,7 @@ static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) for (ifa = in_dev->ifa_list, ip_idx = 0; ifa; ifa = ifa->ifa_next, ip_idx++) { if (ip_idx < s_ip_idx) - goto cont; + continue; if (inet_fill_ifaddr(skb, ifa, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, RTM_NEWADDR, NLM_F_MULTI) <= 0) diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index dbeacd8b0f9..def007ec1d6 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -836,12 +836,16 @@ static int inet_diag_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) return inet_diag_get_exact(skb, nlh); } +static DEFINE_MUTEX(inet_diag_mutex); + static void inet_diag_rcv(struct sock *sk, int len) { unsigned int qlen = 0; do { + mutex_lock(&inet_diag_mutex); netlink_run_queue(sk, &qlen, &inet_diag_rcv_msg); + mutex_unlock(&inet_diag_mutex); } while (qlen); } diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c index 902fd578aa3..f656d41d8d4 100644 --- a/net/ipv4/ipvs/ip_vs_ctl.c +++ b/net/ipv4/ipvs/ip_vs_ctl.c @@ -2339,6 +2339,7 @@ static struct nf_sockopt_ops ip_vs_sockopts = { .get_optmin = IP_VS_BASE_CTL, .get_optmax = IP_VS_SO_GET_MAX+1, .get = do_ip_vs_get_ctl, + .owner = THIS_MODULE, }; diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c index d1149aba935..29114a9ccd1 100644 --- a/net/ipv4/netfilter/arp_tables.c +++ b/net/ipv4/netfilter/arp_tables.c @@ -1161,6 +1161,7 @@ static struct nf_sockopt_ops arpt_sockopts = { .get_optmin = ARPT_BASE_CTL, .get_optmax = ARPT_SO_GET_MAX+1, .get = do_arpt_get_ctl, + .owner = THIS_MODULE, }; static int __init arp_tables_init(void) diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index e1b402c6b85..6486894f450 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -2296,6 +2296,7 @@ static struct nf_sockopt_ops ipt_sockopts = { #ifdef CONFIG_COMPAT .compat_get = compat_do_ipt_get_ctl, #endif + .owner = THIS_MODULE, }; static struct xt_match icmp_matchstruct __read_mostly = { diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index d9b5177989c..f813e02aab3 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -87,14 +87,10 @@ static int ipv4_get_l4proto(const struct sk_buff *skb, unsigned int nhoff, if (iph == NULL) return -NF_DROP; - /* Never happen */ - if (iph->frag_off & htons(IP_OFFSET)) { - if (net_ratelimit()) { - printk(KERN_ERR "ipv4_get_l4proto: Frag of proto %u\n", - iph->protocol); - } + /* Conntrack defragments packets, we might still see fragments + * inside ICMP packets though. */ + if (iph->frag_off & htons(IP_OFFSET)) return -NF_DROP; - } *dataoff = nhoff + (iph->ihl << 2); *protonum = iph->protocol; @@ -403,6 +399,7 @@ static struct nf_sockopt_ops so_getorigdst = { .get_optmin = SO_ORIGINAL_DST, .get_optmax = SO_ORIGINAL_DST+1, .get = &getorigdst, + .owner = THIS_MODULE, }; struct nf_conntrack_l3proto nf_conntrack_l3proto_ipv4 __read_mostly = { diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 5dead399fe6..26de3c0ea31 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1427,8 +1427,9 @@ void ip6_flush_pending_frames(struct sock *sk) struct sk_buff *skb; while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) { - IP6_INC_STATS(ip6_dst_idev(skb->dst), - IPSTATS_MIB_OUTDISCARDS); + if (skb->dst) + IP6_INC_STATS(ip6_dst_idev(skb->dst), + IPSTATS_MIB_OUTDISCARDS); kfree_skb(skb); } diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 0358e6066a4..73a894a2152 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -736,7 +736,7 @@ static void ndisc_recv_ns(struct sk_buff *skb) * so fail our DAD process */ addrconf_dad_failure(ifp); - goto out; + return; } else { /* * This is not a dad solicitation. diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index aeda617246b..cd9df02bb85 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1462,6 +1462,7 @@ static struct nf_sockopt_ops ip6t_sockopts = { .get_optmin = IP6T_BASE_CTL, .get_optmax = IP6T_SO_GET_MAX+1, .get = do_ip6t_get_ctl, + .owner = THIS_MODULE, }; static struct xt_match icmp6_matchstruct __read_mostly = { diff --git a/net/netfilter/nf_sockopt.c b/net/netfilter/nf_sockopt.c index 8b8ece75031..e32761ce260 100644 --- a/net/netfilter/nf_sockopt.c +++ b/net/netfilter/nf_sockopt.c @@ -55,18 +55,7 @@ EXPORT_SYMBOL(nf_register_sockopt); void nf_unregister_sockopt(struct nf_sockopt_ops *reg) { - /* No point being interruptible: we're probably in cleanup_module() */ - restart: mutex_lock(&nf_sockopt_mutex); - if (reg->use != 0) { - /* To be woken by nf_sockopt call... */ - /* FIXME: Stuart Young's name appears gratuitously. */ - set_current_state(TASK_UNINTERRUPTIBLE); - reg->cleanup_task = current; - mutex_unlock(&nf_sockopt_mutex); - schedule(); - goto restart; - } list_del(®->list); mutex_unlock(&nf_sockopt_mutex); } @@ -86,10 +75,11 @@ static int nf_sockopt(struct sock *sk, int pf, int val, list_for_each(i, &nf_sockopts) { ops = (struct nf_sockopt_ops *)i; if (ops->pf == pf) { + if (!try_module_get(ops->owner)) + goto out_nosup; if (get) { if (val >= ops->get_optmin && val < ops->get_optmax) { - ops->use++; mutex_unlock(&nf_sockopt_mutex); ret = ops->get(sk, val, opt, len); goto out; @@ -97,23 +87,20 @@ static int nf_sockopt(struct sock *sk, int pf, int val, } else { if (val >= ops->set_optmin && val < ops->set_optmax) { - ops->use++; mutex_unlock(&nf_sockopt_mutex); ret = ops->set(sk, val, opt, *len); goto out; } } + module_put(ops->owner); } } + out_nosup: mutex_unlock(&nf_sockopt_mutex); return -ENOPROTOOPT; out: - mutex_lock(&nf_sockopt_mutex); - ops->use--; - if (ops->cleanup_task) - wake_up_process(ops->cleanup_task); - mutex_unlock(&nf_sockopt_mutex); + module_put(ops->owner); return ret; } @@ -144,10 +131,12 @@ static int compat_nf_sockopt(struct sock *sk, int pf, int val, list_for_each(i, &nf_sockopts) { ops = (struct nf_sockopt_ops *)i; if (ops->pf == pf) { + if (!try_module_get(ops->owner)) + goto out_nosup; + if (get) { if (val >= ops->get_optmin && val < ops->get_optmax) { - ops->use++; mutex_unlock(&nf_sockopt_mutex); if (ops->compat_get) ret = ops->compat_get(sk, @@ -160,7 +149,6 @@ static int compat_nf_sockopt(struct sock *sk, int pf, int val, } else { if (val >= ops->set_optmin && val < ops->set_optmax) { - ops->use++; mutex_unlock(&nf_sockopt_mutex); if (ops->compat_set) ret = ops->compat_set(sk, @@ -171,17 +159,15 @@ static int compat_nf_sockopt(struct sock *sk, int pf, int val, goto out; } } + module_put(ops->owner); } } + out_nosup: mutex_unlock(&nf_sockopt_mutex); return -ENOPROTOOPT; out: - mutex_lock(&nf_sockopt_mutex); - ops->use--; - if (ops->cleanup_task) - wake_up_process(ops->cleanup_task); - mutex_unlock(&nf_sockopt_mutex); + module_put(ops->owner); return ret; } |