diff options
| -rw-r--r-- | arch/powerpc/platforms/pseries/hotplug-cpu.c | 201 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/smp.c | 200 |
2 files changed, 199 insertions, 202 deletions
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 9e9b6b159fa..12864d75126 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -1,11 +1,14 @@ /* * pseries CPU Hotplug infrastructure. * - * Split out from arch/powerpc/platforms/pseries/setup.c and - * arch/powerpc/kernel/rtas.c + * Split out from arch/powerpc/platforms/pseries/setup.c + * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c * * Peter Bergner, IBM March 2001. * Copyright (C) 2001 IBM. + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * Plus various changes from other IBM teams... * * Copyright (C) 2006 Michael Ellerman, IBM Corporation * @@ -61,12 +64,206 @@ static void pSeries_mach_cpu_die(void) for(;;); } +/* Get state of physical CPU. + * Return codes: + * 0 - The processor is in the RTAS stopped state + * 1 - stop-self is in progress + * 2 - The processor is not in the RTAS stopped state + * -1 - Hardware Error + * -2 - Hardware Busy, Try again later. + */ +static int query_cpu_stopped(unsigned int pcpu) +{ + int cpu_status; + int status, qcss_tok; + + qcss_tok = rtas_token("query-cpu-stopped-state"); + if (qcss_tok == RTAS_UNKNOWN_SERVICE) + return -1; + status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu); + if (status != 0) { + printk(KERN_ERR + "RTAS query-cpu-stopped-state failed: %i\n", status); + return status; + } + + return cpu_status; +} + +static int pSeries_cpu_disable(void) +{ + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_online_map); + vdso_data->processorCount--; + + /*fix boot_cpuid here*/ + if (cpu == boot_cpuid) + boot_cpuid = any_online_cpu(cpu_online_map); + + /* FIXME: abstract this to not be platform specific later on */ + xics_migrate_irqs_away(); + return 0; +} + +static void pSeries_cpu_die(unsigned int cpu) +{ + int tries; + int cpu_status; + unsigned int pcpu = get_hard_smp_processor_id(cpu); + + for (tries = 0; tries < 25; tries++) { + cpu_status = query_cpu_stopped(pcpu); + if (cpu_status == 0 || cpu_status == -1) + break; + msleep(200); + } + if (cpu_status != 0) { + printk("Querying DEAD? cpu %i (%i) shows %i\n", + cpu, pcpu, cpu_status); + } + + /* Isolation and deallocation are definatly done by + * drslot_chrp_cpu. If they were not they would be + * done here. Change isolate state to Isolate and + * change allocation-state to Unusable. + */ + paca[cpu].cpu_start = 0; +} + +/* + * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle + * here is that a cpu device node may represent up to two logical cpus + * in the SMT case. We must honor the assumption in other code that + * the logical ids for sibling SMT threads x and y are adjacent, such + * that x^1 == y and y^1 == x. + */ +static int pSeries_add_processor(struct device_node *np) +{ + unsigned int cpu; + cpumask_t candidate_map, tmp = CPU_MASK_NONE; + int err = -ENOSPC, len, nthreads, i; + const u32 *intserv; + + intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return 0; + + nthreads = len / sizeof(u32); + for (i = 0; i < nthreads; i++) + cpu_set(i, tmp); + + lock_cpu_hotplug(); + + BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map)); + + /* Get a bitmap of unoccupied slots. */ + cpus_xor(candidate_map, cpu_possible_map, cpu_present_map); + if (cpus_empty(candidate_map)) { + /* If we get here, it most likely means that NR_CPUS is + * less than the partition's max processors setting. + */ + printk(KERN_ERR "Cannot add cpu %s; this system configuration" + " supports %d logical cpus.\n", np->full_name, + cpus_weight(cpu_possible_map)); + goto out_unlock; + } + + while (!cpus_empty(tmp)) + if (cpus_subset(tmp, candidate_map)) + /* Found a range where we can insert the new cpu(s) */ + break; + else + cpus_shift_left(tmp, tmp, nthreads); + + if (cpus_empty(tmp)) { + printk(KERN_ERR "Unable to find space in cpu_present_map for" + " processor %s with %d thread(s)\n", np->name, + nthreads); + goto out_unlock; + } + + for_each_cpu_mask(cpu, tmp) { + BUG_ON(cpu_isset(cpu, cpu_present_map)); + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, *intserv++); + } + err = 0; +out_unlock: + unlock_cpu_hotplug(); + return err; +} + +/* + * Update the present map for a cpu node which is going away, and set + * the hard id in the paca(s) to -1 to be consistent with boot time + * convention for non-present cpus. + */ +static void pSeries_remove_processor(struct device_node *np) +{ + unsigned int cpu; + int len, nthreads, i; + const u32 *intserv; + + intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return; + + nthreads = len / sizeof(u32); + + lock_cpu_hotplug(); + for (i = 0; i < nthreads; i++) { + for_each_present_cpu(cpu) { + if (get_hard_smp_processor_id(cpu) != intserv[i]) + continue; + BUG_ON(cpu_online(cpu)); + cpu_clear(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, -1); + break; + } + if (cpu == NR_CPUS) + printk(KERN_WARNING "Could not find cpu to remove " + "with physical id 0x%x\n", intserv[i]); + } + unlock_cpu_hotplug(); +} + +static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node) +{ + int err = NOTIFY_OK; + + switch (action) { + case PSERIES_RECONFIG_ADD: + if (pSeries_add_processor(node)) + err = NOTIFY_BAD; + break; + case PSERIES_RECONFIG_REMOVE: + pSeries_remove_processor(node); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pSeries_smp_nb = { + .notifier_call = pSeries_smp_notifier, +}; + static int __init pseries_cpu_hotplug_init(void) { rtas_stop_self_args.token = rtas_token("stop-self"); ppc_md.cpu_die = pSeries_mach_cpu_die; + smp_ops->cpu_disable = pSeries_cpu_disable; + smp_ops->cpu_die = pSeries_cpu_die; + + /* Processors can be added/removed only on LPAR */ + if (firmware_has_feature(FW_FEATURE_LPAR)) + pSeries_reconfig_notifier_register(&pSeries_smp_nb); + return 0; } arch_initcall(pseries_cpu_hotplug_init); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index c6624b8a0e7..4408518eaeb 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -64,197 +64,6 @@ static cpumask_t of_spin_map; extern void generic_secondary_smp_init(unsigned long); -#ifdef CONFIG_HOTPLUG_CPU - -/* Get state of physical CPU. - * Return codes: - * 0 - The processor is in the RTAS stopped state - * 1 - stop-self is in progress - * 2 - The processor is not in the RTAS stopped state - * -1 - Hardware Error - * -2 - Hardware Busy, Try again later. - */ -static int query_cpu_stopped(unsigned int pcpu) -{ - int cpu_status; - int status, qcss_tok; - - qcss_tok = rtas_token("query-cpu-stopped-state"); - if (qcss_tok == RTAS_UNKNOWN_SERVICE) - return -1; - status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu); - if (status != 0) { - printk(KERN_ERR - "RTAS query-cpu-stopped-state failed: %i\n", status); - return status; - } - - return cpu_status; -} - -static int pSeries_cpu_disable(void) -{ - int cpu = smp_processor_id(); - - cpu_clear(cpu, cpu_online_map); - vdso_data->processorCount--; - - /*fix boot_cpuid here*/ - if (cpu == boot_cpuid) - boot_cpuid = any_online_cpu(cpu_online_map); - - /* FIXME: abstract this to not be platform specific later on */ - xics_migrate_irqs_away(); - return 0; -} - -static void pSeries_cpu_die(unsigned int cpu) -{ - int tries; - int cpu_status; - unsigned int pcpu = get_hard_smp_processor_id(cpu); - - for (tries = 0; tries < 25; tries++) { - cpu_status = query_cpu_stopped(pcpu); - if (cpu_status == 0 || cpu_status == -1) - break; - msleep(200); - } - if (cpu_status != 0) { - printk("Querying DEAD? cpu %i (%i) shows %i\n", - cpu, pcpu, cpu_status); - } - - /* Isolation and deallocation are definatly done by - * drslot_chrp_cpu. If they were not they would be - * done here. Change isolate state to Isolate and - * change allocation-state to Unusable. - */ - paca[cpu].cpu_start = 0; -} - -/* - * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle - * here is that a cpu device node may represent up to two logical cpus - * in the SMT case. We must honor the assumption in other code that - * the logical ids for sibling SMT threads x and y are adjacent, such - * that x^1 == y and y^1 == x. - */ -static int pSeries_add_processor(struct device_node *np) -{ - unsigned int cpu; - cpumask_t candidate_map, tmp = CPU_MASK_NONE; - int err = -ENOSPC, len, nthreads, i; - const u32 *intserv; - - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); - if (!intserv) - return 0; - - nthreads = len / sizeof(u32); - for (i = 0; i < nthreads; i++) - cpu_set(i, tmp); - - lock_cpu_hotplug(); - - BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map)); - - /* Get a bitmap of unoccupied slots. */ - cpus_xor(candidate_map, cpu_possible_map, cpu_present_map); - if (cpus_empty(candidate_map)) { - /* If we get here, it most likely means that NR_CPUS is - * less than the partition's max processors setting. - */ - printk(KERN_ERR "Cannot add cpu %s; this system configuration" - " supports %d logical cpus.\n", np->full_name, - cpus_weight(cpu_possible_map)); - goto out_unlock; - } - - while (!cpus_empty(tmp)) - if (cpus_subset(tmp, candidate_map)) - /* Found a range where we can insert the new cpu(s) */ - break; - else - cpus_shift_left(tmp, tmp, nthreads); - - if (cpus_empty(tmp)) { - printk(KERN_ERR "Unable to find space in cpu_present_map for" - " processor %s with %d thread(s)\n", np->name, - nthreads); - goto out_unlock; - } - - for_each_cpu_mask(cpu, tmp) { - BUG_ON(cpu_isset(cpu, cpu_present_map)); - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, *intserv++); - } - err = 0; -out_unlock: - unlock_cpu_hotplug(); - return err; -} - -/* - * Update the present map for a cpu node which is going away, and set - * the hard id in the paca(s) to -1 to be consistent with boot time - * convention for non-present cpus. - */ -static void pSeries_remove_processor(struct device_node *np) -{ - unsigned int cpu; - int len, nthreads, i; - const u32 *intserv; - - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); - if (!intserv) - return; - - nthreads = len / sizeof(u32); - - lock_cpu_hotplug(); - for (i = 0; i < nthreads; i++) { - for_each_present_cpu(cpu) { - if (get_hard_smp_processor_id(cpu) != intserv[i]) - continue; - BUG_ON(cpu_online(cpu)); - cpu_clear(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, -1); - break; - } - if (cpu == NR_CPUS) - printk(KERN_WARNING "Could not find cpu to remove " - "with physical id 0x%x\n", intserv[i]); - } - unlock_cpu_hotplug(); -} - -static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - int err = NOTIFY_OK; - - switch (action) { - case PSERIES_RECONFIG_ADD: - if (pSeries_add_processor(node)) - err = NOTIFY_BAD; - break; - case PSERIES_RECONFIG_REMOVE: - pSeries_remove_processor(node); - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block pSeries_smp_nb = { - .notifier_call = pSeries_smp_notifier, -}; - -#endif /* CONFIG_HOTPLUG_CPU */ - /** * smp_startup_cpu() - start the given cpu * @@ -422,15 +231,6 @@ static void __init smp_init_pseries(void) DBG(" -> smp_init_pSeries()\n"); -#ifdef CONFIG_HOTPLUG_CPU - smp_ops->cpu_disable = pSeries_cpu_disable; - smp_ops->cpu_die = pSeries_cpu_die; - - /* Processors can be added/removed only on LPAR */ - if (firmware_has_feature(FW_FEATURE_LPAR)) - pSeries_reconfig_notifier_register(&pSeries_smp_nb); -#endif - /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { for_each_present_cpu(i) { |