aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/input/yealink.txt203
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/block/ub.c273
-rw-r--r--drivers/net/irda/irda-usb.c13
-rw-r--r--drivers/usb/atm/cxacru.c2
-rw-r--r--drivers/usb/class/Kconfig21
-rw-r--r--drivers/usb/class/usblp.c9
-rw-r--r--drivers/usb/core/Makefile4
-rw-r--r--drivers/usb/core/devio.c102
-rw-r--r--drivers/usb/core/hcd.h8
-rw-r--r--drivers/usb/core/hub.c115
-rw-r--r--drivers/usb/core/hub.h7
-rw-r--r--drivers/usb/core/inode.c9
-rw-r--r--drivers/usb/core/message.c8
-rw-r--r--drivers/usb/core/urb.c26
-rw-r--r--drivers/usb/core/usb.c35
-rw-r--r--drivers/usb/core/usb.h5
-rw-r--r--drivers/usb/gadget/ether.c33
-rw-r--r--drivers/usb/gadget/file_storage.c33
-rw-r--r--drivers/usb/gadget/gadget_chips.h55
-rw-r--r--drivers/usb/gadget/serial.c51
-rw-r--r--drivers/usb/gadget/zero.c48
-rw-r--r--drivers/usb/host/ehci-q.c7
-rw-r--r--drivers/usb/host/ehci-sched.c4
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/isp116x-hcd.c88
-rw-r--r--drivers/usb/host/ohci-ppc-soc.c24
-rw-r--r--drivers/usb/host/ohci-s3c2410.c4
-rw-r--r--drivers/usb/input/Kconfig14
-rw-r--r--drivers/usb/input/Makefile1
-rw-r--r--drivers/usb/input/hid-core.c9
-rw-r--r--drivers/usb/input/keyspan_remote.c5
-rw-r--r--drivers/usb/input/map_to_7segment.h189
-rw-r--r--drivers/usb/input/yealink.c1013
-rw-r--r--drivers/usb/input/yealink.h220
-rw-r--r--drivers/usb/misc/auerswald.c3
-rw-r--r--drivers/usb/misc/ldusb.c6
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c4
-rw-r--r--drivers/usb/misc/usbtest.c2
-rw-r--r--drivers/usb/mon/Makefile2
-rw-r--r--drivers/usb/mon/mon_dma.c55
-rw-r--r--drivers/usb/mon/mon_text.c35
-rw-r--r--drivers/usb/mon/usb_mon.h4
-rw-r--r--drivers/usb/net/Kconfig208
-rw-r--r--drivers/usb/net/Makefile8
-rw-r--r--drivers/usb/net/asix.c948
-rw-r--r--drivers/usb/net/catc.c2
-rw-r--r--drivers/usb/net/cdc_ether.c509
-rw-r--r--drivers/usb/net/cdc_subset.c335
-rw-r--r--drivers/usb/net/gl620a.c407
-rw-r--r--drivers/usb/net/kaweth.c1
-rw-r--r--drivers/usb/net/net1080.c622
-rw-r--r--drivers/usb/net/pegasus.c1
-rw-r--r--drivers/usb/net/plusb.c156
-rw-r--r--drivers/usb/net/rndis_host.c615
-rw-r--r--drivers/usb/net/rtl8150.c1
-rw-r--r--drivers/usb/net/usbnet.c3226
-rw-r--r--drivers/usb/net/usbnet.h193
-rw-r--r--drivers/usb/net/zaurus.c386
-rw-r--r--drivers/usb/net/zd1201.c1
-rw-r--r--drivers/usb/serial/cypress_m8.c251
-rw-r--r--drivers/usb/serial/ftdi_sio.c56
-rw-r--r--drivers/usb/serial/ftdi_sio.h54
-rw-r--r--drivers/usb/serial/keyspan.c8
-rw-r--r--drivers/usb/serial/option.c203
-rw-r--r--drivers/usb/serial/pl2303.c6
-rw-r--r--drivers/usb/serial/usb-serial.c24
-rw-r--r--drivers/usb/storage/Kconfig12
-rw-r--r--drivers/usb/storage/Makefile1
-rw-r--r--drivers/usb/storage/onetouch.c210
-rw-r--r--drivers/usb/storage/onetouch.h9
-rw-r--r--drivers/usb/storage/scsiglue.c8
-rw-r--r--drivers/usb/storage/shuttle_usbat.c97
-rw-r--r--drivers/usb/storage/transport.c17
-rw-r--r--drivers/usb/storage/unusual_devs.h19
-rw-r--r--drivers/usb/storage/usb.c79
-rw-r--r--drivers/usb/storage/usb.h1
-rw-r--r--include/linux/usb.h11
-rw-r--r--include/linux/usb_isp116x.h30
-rw-r--r--sound/usb/usbaudio.c10
80 files changed, 7406 insertions, 4076 deletions
diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt
new file mode 100644
index 00000000000..85f095a7ad0
--- /dev/null
+++ b/Documentation/input/yealink.txt
@@ -0,0 +1,203 @@
+Driver documentation for yealink usb-p1k phones
+
+0. Status
+~~~~~~~~~
+
+The p1k is a relatively cheap usb 1.1 phone with:
+ - keyboard full support, yealink.ko / input event API
+ - LCD full support, yealink.ko / sysfs API
+ - LED full support, yealink.ko / sysfs API
+ - dialtone full support, yealink.ko / sysfs API
+ - ringtone full support, yealink.ko / sysfs API
+ - audio playback full support, snd_usb_audio.ko / alsa API
+ - audio record full support, snd_usb_audio.ko / alsa API
+
+For vendor documentation see http://www.yealink.com
+
+
+1. Compilation (stand alone version)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Currently only kernel 2.6.x.y versions are supported.
+In order to build the yealink.ko module do:
+
+ make
+
+If you encounter problems please check if in the MAKE_OPTS variable in
+the Makefile is pointing to the location where your kernel sources
+are located, default /usr/src/linux.
+
+
+
+2. keyboard features
+~~~~~~~~~~~~~~~~~~~~
+The current mapping in the kernel is provided by the map_p1k_to_key
+function:
+
+ Physical USB-P1K button layout input events
+
+
+ up up
+ IN OUT left, right
+ down down
+
+ pickup C hangup enter, backspace, escape
+ 1 2 3 1, 2, 3
+ 4 5 6 4, 5, 6,
+ 7 8 9 7, 8, 9,
+ * 0 # *, 0, #,
+
+ The "up" and "down" keys, are symbolised by arrows on the button.
+ The "pickup" and "hangup" keys are symbolised by a green and red phone
+ on the button.
+
+
+3. LCD features
+~~~~~~~~~~~~~~~
+The LCD is divided and organised as a 3 line display:
+
+ |[] [][] [][] [][] in |[][]
+ |[] M [][] D [][] : [][] out |[][]
+ store
+
+ NEW REP SU MO TU WE TH FR SA
+
+ [] [] [] [] [] [] [] [] [] [] [] []
+ [] [] [] [] [] [] [] [] [] [] [] []
+
+
+Line 1 Format (see below) : 18.e8.M8.88...188
+ Icon names : M D : IN OUT STORE
+Line 2 Format : .........
+ Icon name : NEW REP SU MO TU WE TH FR SA
+Line 3 Format : 888888888888
+
+
+Format description:
+ From a user space perspective the world is seperated in "digits" and "icons".
+ A digit can have a character set, an icon can only be ON or OFF.
+
+ Format specifier
+ '8' : Generic 7 segment digit with individual addressable segments
+
+ Reduced capabillity 7 segm digit, when segments are hard wired together.
+ '1' : 2 segments digit only able to produce a 1.
+ 'e' : Most significant day of the month digit,
+ able to produce at least 1 2 3.
+ 'M' : Most significant minute digit,
+ able to produce at least 0 1 2 3 4 5.
+
+ Icons or pictograms:
+ '.' : For example like AM, PM, SU, a 'dot' .. or other single segment
+ elements.
+
+
+4. Driver usage
+~~~~~~~~~~~~~~~
+For userland the following interfaces are available using the sysfs interface:
+ /sys/.../
+ line1 Read/Write, lcd line1
+ line2 Read/Write, lcd line2
+ line3 Read/Write, lcd line3
+
+ get_icons Read, returns a set of available icons.
+ hide_icon Write, hide the element by writing the icon name.
+ show_icon Write, display the element by writing the icon name.
+
+ map_seg7 Read/Write, the 7 segments char set, common for all
+ yealink phones. (see map_to_7segment.h)
+
+ ringtone Write, upload binary representation of a ringtone,
+ see yealink.c. status EXPERIMENTAL due to potential
+ races between async. and sync usb calls.
+
+
+4.1 lineX
+~~~~~~~~~
+Reading /sys/../lineX will return the format string with its current value:
+
+ Example:
+ cat ./line3
+ 888888888888
+ Linux Rocks!
+
+Writing to /sys/../lineX will set the coresponding LCD line.
+ - Excess characters are ignored.
+ - If less characters are written than allowed, the remaining digits are
+ unchanged.
+ - The tab '\t'and '\n' char does not overwrite the original content.
+ - Writing a space to an icon will always hide its content.
+
+ Example:
+ date +"%m.%e.%k:%M" | sed 's/^0/ /' > ./line1
+
+ Will update the LCD with the current date & time.
+
+
+4.2 get_icons
+~~~~~~~~~~~~~
+Reading will return all available icon names and its current settings:
+
+ cat ./get_icons
+ on M
+ on D
+ on :
+ IN
+ OUT
+ STORE
+ NEW
+ REP
+ SU
+ MO
+ TU
+ WE
+ TH
+ FR
+ SA
+ LED
+ DIALTONE
+ RINGTONE
+
+
+4.3 show/hide icons
+~~~~~~~~~~~~~~~~~~~
+Writing to these files will update the state of the icon.
+Only one icon at a time can be updated.
+
+If an icon is also on a ./lineX the corresponding value is
+updated with the first letter of the icon.
+
+ Example - light up the store icon:
+ echo -n "STORE" > ./show_icon
+
+ cat ./line1
+ 18.e8.M8.88...188
+ S
+
+ Example - sound the ringtone for 10 seconds:
+ echo -n RINGTONE > /sys/..../show_icon
+ sleep 10
+ echo -n RINGTONE > /sys/..../hide_icon
+
+
+5. Sound features
+~~~~~~~~~~~~~~~~~
+Sound is supported by the ALSA driver: snd_usb_audio
+
+One 16-bit channel with sample and playback rates of 8000 Hz is the practical
+limit of the device.
+
+ Example - recording test:
+ arecord -v -d 10 -r 8000 -f S16_LE -t wav foobar.wav
+
+ Example - playback test:
+ aplay foobar.wav
+
+
+6. Credits & Acknowledgments
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ - Olivier Vandorpe, for starting the usbb2k-api project doing much of
+ the reverse engineering.
+ - Martin Diehl, for pointing out how to handle USB memory allocation.
+ - Dmitry Torokhov, for the numerous code reviews and suggestions.
+
diff --git a/MAINTAINERS b/MAINTAINERS
index cb389067cf6..eaa46594f02 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -116,6 +116,12 @@ M: ajk@iehk.rwth-aachen.de
L: linux-hams@vger.kernel.org
S: Maintained
+YEALINK PHONE DRIVER
+P: Henk Vergonet
+M: Henk.Vergonet@gmail.com
+L: usbb2k-api-dev@nongnu.org
+S: Maintained
+
8139CP 10/100 FAST ETHERNET DRIVER
P: Jeff Garzik
M: jgarzik@pobox.com
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index a026567f5d1..aa0bf7ee008 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -16,9 +16,10 @@
* -- verify the 13 conditions and do bulk resets
* -- kill last_pipe and simply do two-state clearing on both pipes
* -- verify protocol (bulk) from USB descriptors (maybe...)
- * -- highmem and sg
+ * -- highmem
* -- move top_sense and work_bcs into separate allocations (if they survive)
* for cache purists and esoteric architectures.
+ * -- Allocate structure for LUN 0 before the first ub_sync_tur, avoid NULL. ?
* -- prune comments, they are too volumnous
* -- Exterminate P3 printks
* -- Resove XXX's
@@ -171,7 +172,7 @@ struct bulk_cs_wrap {
*/
struct ub_dev;
-#define UB_MAX_REQ_SG 1
+#define UB_MAX_REQ_SG 4
#define UB_MAX_SECTORS 64
/*
@@ -234,13 +235,10 @@ struct ub_scsi_cmd {
int stat_count; /* Retries getting status. */
- /*
- * We do not support transfers from highmem pages
- * because the underlying USB framework does not do what we need.
- */
- char *data; /* Requested buffer */
unsigned int len; /* Requested length */
- // struct scatterlist sgv[UB_MAX_REQ_SG];
+ unsigned int current_sg;
+ unsigned int nsg; /* sgv[nsg] */
+ struct scatterlist sgv[UB_MAX_REQ_SG];
struct ub_lun *lun;
void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
@@ -389,17 +387,18 @@ struct ub_dev {
struct bulk_cs_wrap work_bcs;
struct usb_ctrlrequest work_cr;
+ int sg_stat[UB_MAX_REQ_SG+1];
struct ub_scsi_trace tr;
};
/*
*/
static void ub_cleanup(struct ub_dev *sc);
-static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq);
+static int ub_request_fn_1(struct ub_lun *lun, struct request *rq);
static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct request *rq);
-static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq);
+static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
static void ub_end_rq(struct request *rq, int uptodate);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -407,6 +406,7 @@ static void ub_urb_complete(struct urb *urb, struct pt_regs *pt);
static void ub_scsi_action(unsigned long _dev);
static void ub_scsi_dispatch(struct ub_dev *sc);
static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
+static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc);
static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -500,7 +500,8 @@ static void ub_cmdtr_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
}
}
-static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr, char *page)
+static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
+ char *page)
{
struct usb_interface *intf;
struct ub_dev *sc;
@@ -523,6 +524,13 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr, c
cnt += sprintf(page + cnt,
"qlen %d qmax %d\n",
sc->cmd_queue.qlen, sc->cmd_queue.qmax);
+ cnt += sprintf(page + cnt,
+ "sg %d %d %d %d %d\n",
+ sc->sg_stat[0],
+ sc->sg_stat[1],
+ sc->sg_stat[2],
+ sc->sg_stat[3],
+ sc->sg_stat[4]);
list_for_each (p, &sc->luns) {
lun = list_entry(p, struct ub_lun, link);
@@ -744,20 +752,20 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
* The request function is our main entry point
*/
-static void ub_bd_rq_fn(request_queue_t *q)
+static void ub_request_fn(request_queue_t *q)
{
struct ub_lun *lun = q->queuedata;
struct request *rq;
while ((rq = elv_next_request(q)) != NULL) {
- if (ub_bd_rq_fn_1(lun, rq) != 0) {
+ if (ub_request_fn_1(lun, rq) != 0) {
blk_stop_queue(q);
break;
}
}
}
-static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
+static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
{
struct ub_dev *sc = lun->udev;
struct ub_scsi_cmd *cmd;
@@ -774,9 +782,8 @@ static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
memset(cmd, 0, sizeof(struct ub_scsi_cmd));
blkdev_dequeue_request(rq);
-
if (blk_pc_request(rq)) {
- rc = ub_cmd_build_packet(sc, cmd, rq);
+ rc = ub_cmd_build_packet(sc, lun, cmd, rq);
} else {
rc = ub_cmd_build_block(sc, lun, cmd, rq);
}
@@ -791,7 +798,7 @@ static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
cmd->back = rq;
cmd->tag = sc->tagcnt++;
- if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
+ if (ub_submit_scsi(sc, cmd) != 0) {
ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
return 0;
@@ -804,58 +811,31 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct request *rq)
{
int ub_dir;
-#if 0 /* We use rq->buffer for now */
- struct scatterlist *sg;
int n_elem;
-#endif
unsigned int block, nblks;
if (rq_data_dir(rq) == WRITE)
ub_dir = UB_DIR_WRITE;
else
ub_dir = UB_DIR_READ;
+ cmd->dir = ub_dir;
/*
* get scatterlist from block layer
*/
-#if 0 /* We use rq->buffer for now */
- sg = &cmd->sgv[0];
- n_elem = blk_rq_map_sg(q, rq, sg);
+ n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]);
if (n_elem <= 0) {
- ub_put_cmd(lun, cmd);
- ub_end_rq(rq, 0);
- blk_start_queue(q);
- return 0; /* request with no s/g entries? */
+ printk(KERN_INFO "%s: failed request map (%d)\n",
+ sc->name, n_elem); /* P3 */
+ return -1; /* request with no s/g entries? */
}
-
- if (n_elem != 1) { /* Paranoia */
+ if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */
printk(KERN_WARNING "%s: request with %d segments\n",
sc->name, n_elem);
- ub_put_cmd(lun, cmd);
- ub_end_rq(rq, 0);
- blk_start_queue(q);
- return 0;
- }
-#endif
-
- /*
- * XXX Unfortunately, this check does not work. It is quite possible
- * to get bogus non-null rq->buffer if you allow sg by mistake.
- */
- if (rq->buffer == NULL) {
- /*
- * This must not happen if we set the queue right.
- * The block level must create bounce buffers for us.
- */
- static int do_print = 1;
- if (do_print) {
- printk(KERN_WARNING "%s: unmapped block request"
- " flags 0x%lx sectors %lu\n",
- sc->name, rq->flags, rq->nr_sectors);
- do_print = 0;
- }
return -1;
}
+ cmd->nsg = n_elem;
+ sc->sg_stat[n_elem]++;
/*
* build the command
@@ -876,30 +856,15 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
cmd->cdb[8] = nblks;
cmd->cdb_len = 10;
- cmd->dir = ub_dir;
- cmd->data = rq->buffer;
cmd->len = rq->nr_sectors * 512;
return 0;
}
-static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq)
+static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq)
{
-
- if (rq->data_len != 0 && rq->data == NULL) {
- static int do_print = 1;
- if (do_print) {
- printk(KERN_WARNING "%s: unmapped packet request"
- " flags 0x%lx length %d\n",
- sc->name, rq->flags, rq->data_len);
- do_print = 0;
- }
- return -1;
- }
-
- memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
- cmd->cdb_len = rq->cmd_len;
+ int n_elem;
if (rq->data_len == 0) {
cmd->dir = UB_DIR_NONE;
@@ -908,8 +873,29 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
cmd->dir = UB_DIR_WRITE;
else
cmd->dir = UB_DIR_READ;
+
+ }
+
+ /*
+ * get scatterlist from block layer
+ */
+ n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]);
+ if (n_elem < 0) {
+ printk(KERN_INFO "%s: failed request map (%d)\n",
+ sc->name, n_elem); /* P3 */
+ return -1;
}
- cmd->data = rq->data;
+ if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */
+ printk(KERN_WARNING "%s: request with %d segments\n",
+ sc->name, n_elem);
+ return -1;
+ }
+ cmd->nsg = n_elem;
+ sc->sg_stat[n_elem]++;
+
+ memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
+ cmd->cdb_len = rq->cmd_len;
+
cmd->len = rq->data_len;
return 0;
@@ -919,24 +905,34 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct request *rq = cmd->back;
struct ub_lun *lun = cmd->lun;
- struct gendisk *disk = lun->disk;
- request_queue_t *q = disk->queue;
int uptodate;
- if (blk_pc_request(rq)) {
- /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
- memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
- rq->sense_len = UB_SENSE_SIZE;
- }
-
- if (cmd->error == 0)
+ if (cmd->error == 0) {
uptodate = 1;
- else
+
+ if (blk_pc_request(rq)) {
+ if (cmd->act_len >= rq->data_len)
+ rq->data_len = 0;
+ else
+ rq->data_len -= cmd->act_len;
+ }
+ } else {
uptodate = 0;
+ if (blk_pc_request(rq)) {
+ /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
+ memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
+ rq->sense_len = UB_SENSE_SIZE;
+ if (sc->top_sense[0] != 0)
+ rq->errors = SAM_STAT_CHECK_CONDITION;
+ else
+ rq->errors = DID_ERROR << 16;
+ }
+ }
+
ub_put_cmd(lun, cmd);
ub_end_rq(rq, uptodate);
- blk_start_queue(q);
+ blk_start_queue(lun->disk->queue);
}
static void ub_end_rq(struct request *rq, int uptodate)
@@ -1014,7 +1010,7 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
sc->last_pipe = sc->send_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
+ sc->work_urb.transfer_flags = 0;
/* Fill what we shouldn't be filling, because usb-storage did so. */
sc->work_urb.actual_length = 0;
@@ -1103,7 +1099,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct urb *urb = &sc->work_urb;
struct bulk_cs_wrap *bcs;
- int pipe;
int rc;
if (atomic_read(&sc->poison)) {
@@ -1204,38 +1199,13 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
goto Bad_End;
}
- if (cmd->dir == UB_DIR_NONE) {
+ if (cmd->dir == UB_DIR_NONE || cmd->nsg < 1) {
ub_state_stat(sc, cmd);
return;
}
- UB_INIT_COMPLETION(sc->work_done);
-
- if (cmd->dir == UB_DIR_READ)
- pipe = sc->recv_bulk_pipe;
- else
- pipe = sc->send_bulk_pipe;
- sc->last_pipe = pipe;
- usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
- cmd->data, cmd->len, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
- sc->work_urb.actual_length = 0;
- sc->work_urb.error_count = 0;
- sc->work_urb.status = 0;
-
- if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
- /* XXX Clear stalls */
- printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
- ub_complete(&sc->work_done);
- ub_state_done(sc, cmd, rc);
- return;
- }
-
- sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
- add_timer(&sc->work_timer);
-
- cmd->state = UB_CMDST_DATA;
- ub_cmdtr_state(sc, cmd);
+ // udelay(125); // usb-storage has this
+ ub_data_start(sc, cmd);
} else if (cmd->state == UB_CMDST_DATA) {
if (urb->status == -EPIPE) {
@@ -1257,16 +1227,22 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (urb->status == -EOVERFLOW) {
/*
* A babble? Failure, but we must transfer CSW now.
+ * XXX This is going to end in perpetual babble. Reset.
*/
cmd->error = -EOVERFLOW; /* A cheap trick... */
- } else {
- if (urb->status != 0)
- goto Bad_End;
+ ub_state_stat(sc, cmd);
+ return;
}
+ if (urb->status != 0)
+ goto Bad_End;
- cmd->act_len = urb->actual_length;
+ cmd->act_len += urb->actual_length;
ub_cmdtr_act_len(sc, cmd);
+ if (++cmd->current_sg < cmd->nsg) {
+ ub_data_start(sc, cmd);
+ return;
+ }
ub_state_stat(sc, cmd);
} else if (cmd->state == UB_CMDST_STAT) {
@@ -1401,6 +1377,46 @@ Bad_End: /* Little Excel is dead */
/*
* Factorization helper for the command state machine:
+ * Initiate a data segment transfer.
+ */
+static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
+{
+ struct scatterlist *sg = &cmd->sgv[cmd->current_sg];
+ int pipe;
+ int rc;
+
+ UB_INIT_COMPLETION(sc->work_done);
+
+ if (cmd->dir == UB_DIR_READ)
+ pipe = sc->recv_bulk_pipe;
+ else
+ pipe = sc->send_bulk_pipe;
+ sc->last_pipe = pipe;
+ usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
+ page_address(sg->page) + sg->offset, sg->length,
+ ub_urb_complete, sc);
+ sc->work_urb.transfer_flags = 0;
+ sc->work_urb.actual_length = 0;
+ sc->work_urb.error_count = 0;
+ sc->work_urb.status = 0;
+
+ if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
+ /* XXX Clear stalls */
+ printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
+ ub_complete(&sc->work_done);
+ ub_state_done(sc, cmd, rc);
+ return;
+ }
+
+ sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
+ add_timer(&sc->work_timer);
+
+ cmd->state = UB_CMDST_DATA;
+ ub_cmdtr_state(sc, cmd);
+}
+
+/*
+ * Factorization helper for the command state machine:
* Finish the command.
*/
static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
@@ -1426,7 +1442,7 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
sc->last_pipe = sc->recv_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
&sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
+ sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -1484,6 +1500,7 @@ static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct ub_scsi_cmd *scmd;
+ struct scatterlist *sg;
int rc;
if (cmd->cdb[0] == REQUEST_SENSE) {
@@ -1492,12 +1509,17 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
}
scmd = &sc->top_rqs_cmd;
+ memset(scmd, 0, sizeof(struct ub_scsi_cmd));
scmd->cdb[0] = REQUEST_SENSE;
scmd->cdb[4] = UB_SENSE_SIZE;
scmd->cdb_len = 6;
scmd->dir = UB_DIR_READ;
scmd->state = UB_CMDST_INIT;
- scmd->data = sc->top_sense;
+ scmd->nsg = 1;
+ sg = &scmd->sgv[0];
+ sg->page = virt_to_page(sc->top_sense);
+ sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1);
+ sg->length = UB_SENSE_SIZE;
scmd->len = UB_SENSE_SIZE;
scmd->lun = cmd->lun;
scmd->done = ub_top_sense_done;
@@ -1541,7 +1563,7 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = URB_ASYNC_UNLINK;
+ sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -1560,7 +1582,7 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
*/
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
{
- unsigned char *sense = scmd->data;
+ unsigned char *sense = sc->top_sense;
struct ub_scsi_cmd *cmd;
/*
@@ -1852,6 +1874,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
struct ub_capacity *ret)
{
struct ub_scsi_cmd *cmd;
+ struct scatterlist *sg;
char *p;
enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) + 8 };
unsigned long flags;
@@ -1872,7 +1895,11 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
cmd->cdb_len = 10;
cmd->dir = UB_DIR_READ;
cmd->state = UB_CMDST_INIT;
- cmd->data = p;
+ cmd->nsg = 1;
+ sg = &cmd->sgv[0];
+ sg->page = virt_to_page(p);
+ sg->offset = (unsigned int)p & (PAGE_SIZE-1);
+ sg->length = 8;
cmd->len = 8;
cmd->lun = lun;
cmd->done = ub_probe_done;
@@ -2289,7 +2316,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
rc = -ENOMEM;
- if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL)
+ if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
goto err_blkqinit;
disk->queue = q;
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 46e0022d325..6c766fdc51a 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -267,7 +267,7 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
frame, IRDA_USB_SPEED_MTU,
speed_bulk_callback, self);
urb->transfer_buffer_length = USB_IRDA_HEADER;
- urb->transfer_flags = URB_ASYNC_UNLINK;
+ urb->transfer_flags = 0;
/* Irq disabled -> GFP_ATOMIC */
if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
@@ -401,15 +401,12 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
skb->data, IRDA_SKB_MAX_MTU,
write_bulk_callback, skb);
urb->transfer_buffer_length = skb->len;
- /* Note : unlink *must* be Asynchronous because of the code in
- * irda_usb_net_timeout() -> call in irq - Jean II */
- urb->transfer_flags = URB_ASYNC_UNLINK;
/* This flag (URB_ZERO_PACKET) indicates that what we send is not
* a continuous stream of data but separate packets.
* In this case, the USB layer will insert an empty USB frame (TD)
* after each of our packets that is exact multiple of the frame size.
* This is how the dongle will detect the end of packet - Jean II */
- urb->transfer_flags |= URB_ZERO_PACKET;
+ urb->transfer_flags = URB_ZERO_PACKET;
/* Generate min turn time. FIXME: can we do better than this? */
/* Trying to a turnaround time at this level is trying to measure
@@ -630,8 +627,6 @@ static void irda_usb_net_timeout(struct net_device *netdev)
* in completion handler, because urb->status will
* be -ENOENT. We will fix that at the next watchdog,
* leaving more time to USB to recover...
- * Also, we are in interrupt, so we need to have
- * URB_ASYNC_UNLINK to work properly...
* Jean II */
done = 1;
break;
@@ -1008,9 +1003,7 @@ static int irda_usb_net_close(struct net_device *netdev)
}
}
/* Cancel Tx and speed URB - need to be synchronous to avoid races */
- self->tx_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
usb_kill_urb(self->tx_urb);
- self->speed_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
usb_kill_urb(self->speed_urb);
/* Stop and remove instance of IrLAP */
@@ -1521,9 +1514,7 @@ static void irda_usb_disconnect(struct usb_interface *intf)
usb_kill_urb(self->rx_urb[i]);
/* Cancel Tx and speed URB.
* Toggle flags to make sure it's synchronous. */
- self->tx_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
usb_kill_urb(self->tx_urb);
- self->speed_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
usb_kill_urb(self->speed_urb);
}
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 8e184e2641c..79861ee12a2 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -715,13 +715,11 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
instance->rcv_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->rcv_done, 1);
- instance->rcv_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_fill_int_urb(instance->snd_urb,
usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
instance->snd_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->snd_done, 4);
- instance->snd_urb->transfer_flags |= URB_ASYNC_UNLINK;
init_MUTEX(&instance->cm_serialize);
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 0561d0234f2..333e39bb105 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -4,9 +4,22 @@
comment "USB Device Class drivers"
depends on USB
+config OBSOLETE_OSS_USB_DRIVER
+ bool "Obsolete OSS USB drivers"
+ depends on USB && SOUND
+ help
+ This option enables support for the obsolete USB Audio and Midi
+ drivers that are scheduled for removal in the near future since
+ there are ALSA drivers for the same hardware.
+
+ Please contact Adrian Bunk <bunk@stusta.de> if you had to
+ say Y here because of missing support in the ALSA drivers.
+
+ If unsure, say N.
+
config USB_AUDIO
tristate "USB Audio support"
- depends on USB && SOUND
+ depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
help
Say Y here if you want to connect USB audio equipment such as
speakers to your computer's USB port. You only need this if you use
@@ -40,10 +53,12 @@ config USB_BLUETOOTH_TTY
config USB_MIDI
tristate "USB MIDI support"
- depends on USB && SOUND
+ depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
---help---
Say Y here if you want to connect a USB MIDI device to your
- computer's USB port. This driver is for devices that comply with
+ computer's USB port. You only need this if you use the OSS
+ sound system; USB MIDI devices are supported by ALSA's USB
+ audio driver. This driver is for devices that comply with
'Universal Serial Bus Device Class Definition for MIDI Device'.
The following devices are known to work:
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 7ce43fb8118..e195709c9c7 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -310,8 +310,9 @@ static int usblp_check_status(struct usblp *usblp, int err)
error = usblp_read_status (usblp, usblp->statusbuf);
if (error < 0) {
- err("usblp%d: error %d reading printer status",
- usblp->minor, error);
+ if (printk_ratelimit())
+ err("usblp%d: error %d reading printer status",
+ usblp->minor, error);
return 0;
}
@@ -604,7 +605,9 @@ static int usblp_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
case LPGETSTATUS:
if (usblp_read_status(usblp, usblp->statusbuf)) {
- err("usblp%d: failed reading printer status", usblp->minor);
+ if (printk_ratelimit())
+ err("usblp%d: failed reading printer status",
+ usblp->minor);
retval = -EIO;
goto done;
}
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index 9e8c377b816..d5503cf0bf7 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -3,14 +3,14 @@
#
usbcore-objs := usb.o hub.o hcd.o urb.o message.o \
- config.o file.o buffer.o sysfs.o
+ config.o file.o buffer.o sysfs.o devio.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
endif
ifeq ($(CONFIG_USB_DEVICEFS),y)
- usbcore-objs += devio.o inode.o devices.o
+ usbcore-objs += inode.o devices.o
endif
obj-$(CONFIG_USB) += usbcore.o
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f86bf1454e2..b4265aa7d45 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -43,6 +43,7 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
+#include <linux/cdev.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include <linux/moduleparam.h>
@@ -50,6 +51,10 @@
#include "hcd.h" /* for usbcore internals */
#include "usb.h"
+#define USB_MAXBUS 64
+#define USB_DEVICE_MAX USB_MAXBUS * 128
+static struct class *usb_device_class;
+
struct async {
struct list_head asynclist;
struct dev_state *ps;
@@ -71,6 +76,8 @@ MODULE_PARM_DESC (usbfs_snoop, "true to log all usbfs traffic");
dev_info( dev , format , ## arg); \
} while (0)
+#define USB_DEVICE_DEV MKDEV(USB_DEVICE_MAJOR, 0)
+
#define MAX_USBFS_BUFFER_SIZE 16384
@@ -487,7 +494,7 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
*/
static int usbdev_open(struct inode *inode, struct file *file)
{
- struct usb_device *dev;
+ struct usb_device *dev = NULL;
struct dev_state *ps;
int ret;
@@ -501,11 +508,16 @@ static int usbdev_open(struct inode *inode, struct file *file)
lock_kernel();
ret = -ENOENT;
- dev = usb_get_dev(inode->u.generic_ip);
+ /* check if we are called from a real node or usbfs */
+ if (imajor(inode) == USB_DEVICE_MAJOR)
+ dev = usbdev_lookup_minor(iminor(inode));
+ if (!dev)
+ dev = inode->u.generic_ip;
if (!dev) {
kfree(ps);
goto out;
}
+ usb_get_dev(dev);
ret = 0;
ps->dev = dev;
ps->file = file;
@@ -1226,7 +1238,6 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
int retval = 0;
struct usb_interface *intf = NULL;
struct usb_driver *driver = NULL;
- int i;
/* get input parameters and alloc buffer */
if (copy_from_user(&ctrl, arg, sizeof (ctrl)))
@@ -1258,15 +1269,6 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
/* disconnect kernel driver from interface */
case USBDEVFS_DISCONNECT:
- /* don't allow the user to unbind the hub driver from
- * a hub with children to manage */
- for (i = 0; i < ps->dev->maxchild; ++i) {
- if (ps->dev->children[i])
- retval = -EBUSY;
- }
- if (retval)
- break;
-
down_write(&usb_bus_type.subsys.rwsem);
if (intf->dev.driver) {
driver = to_usb_driver(intf->dev.driver);
@@ -1477,3 +1479,79 @@ struct file_operations usbfs_device_file_operations = {
.open = usbdev_open,
.release = usbdev_release,
};
+
+struct usb_device *usbdev_lookup_minor(int minor)
+{
+ struct class_device *class_dev;
+ struct usb_device *dev = NULL;
+
+ down(&usb_device_class->sem);
+ list_for_each_entry(class_dev, &usb_device_class->children, node) {
+ if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+ dev = class_dev->class_data;
+ break;
+ }
+ }
+ up(&usb_device_class->sem);
+
+ return dev;
+};
+
+void usbdev_add(struct usb_device *dev)
+{
+ int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
+
+ dev->class_dev = class_device_create(usb_device_class,
+ MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
+ "usbdev%d.%d", dev->bus->busnum, dev->devnum);
+
+ dev->class_dev->class_data = dev;
+}
+
+void usbdev_remove(struct usb_device *dev)
+{
+ class_device_unregister(dev->class_dev);
+}
+
+static struct cdev usb_device_cdev = {
+ .kobj = {.name = "usb_device", },
+ .owner = THIS_MODULE,
+};
+
+int __init usbdev_init(void)
+{
+ int retval;
+
+ retval = register_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX,
+ "usb_device");
+ if (retval) {
+ err("unable to register minors for usb_device");
+ goto out;
+ }
+ cdev_init(&usb_device_cdev, &usbfs_device_file_operations);
+ retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
+ if (retval) {
+ err("unable to get usb_device major %d", USB_DEVICE_MAJOR);
+ unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+ goto out;
+ }
+ usb_device_class = class_create(THIS_MODULE, "usb_device");
+ if (IS_ERR(usb_device_class)) {
+ err("unable to register usb_device class");
+ retval = PTR_ERR(usb_device_class);
+ usb_device_class = NULL;
+ cdev_del(&usb_device_cdev);
+ unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+ }
+
+out:
+ return retval;
+}
+
+void usbdev_cleanup(void)
+{
+ class_destroy(usb_device_class);
+ cdev_del(&usb_device_cdev);
+ unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+}
+
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 28055f95645..ac451fa7e4d 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -339,11 +339,11 @@ extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
* to preallocate bandwidth)
*/
#define USB2_HOST_DELAY 5 /* nsec, guess */
-#define HS_NSECS(bytes) ( ((55 * 8 * 2083)/1000) \
- + ((2083UL * (3167 + BitTime (bytes)))/1000) \
+#define HS_NSECS(bytes) ( ((55 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ USB2_HOST_DELAY)
-#define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083)/1000) \
- + ((2083UL * (3167 + BitTime (bytes)))/1000) \
+#define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ USB2_HOST_DELAY)
#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c9412daff68..758c7f0ed15 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -492,6 +492,23 @@ static int hub_hub_status(struct usb_hub *hub,
return ret;
}
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_device *hdev = hub->hdev;
+ int ret;
+
+ if (hdev->children[port1-1] && set_state) {
+ usb_set_device_state(hdev->children[port1-1],
+ USB_STATE_NOTATTACHED);
+ }
+ ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+ if (ret)
+ dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+ port1, ret);
+
+ return ret;
+}
+
static int hub_configure(struct usb_hub *hub,
struct usb_endpoint_descriptor *endpoint)
{
@@ -610,19 +627,33 @@ static int hub_configure(struct usb_hub *hub,
break;
}
+ /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) {
- case 0x00:
- if (hdev->descriptor.bDeviceProtocol != 0)
- dev_dbg(hub_dev, "TT requires at most 8 FS bit times\n");
+ case HUB_TTTT_8_BITS:
+ if (hdev->descriptor.bDeviceProtocol != 0) {
+ hub->tt.think_time = 666;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 8, hub->tt.think_time);
+ }
break;
- case 0x20:
- dev_dbg(hub_dev, "TT requires at most 16 FS bit times\n");
+ case HUB_TTTT_16_BITS:
+ hub->tt.think_time = 666 * 2;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 16, hub->tt.think_time);
break;
- case 0x40:
- dev_dbg(hub_dev, "TT requires at most 24 FS bit times\n");
+ case HUB_TTTT_24_BITS:
+ hub->tt.think_time = 666 * 3;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 24, hub->tt.think_time);
break;
- case 0x60:
- dev_dbg(hub_dev, "TT requires at most 32 FS bit times\n");
+ case HUB_TTTT_32_BITS:
+ hub->tt.think_time = 666 * 4;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 32, hub->tt.think_time);
break;
}
@@ -712,20 +743,36 @@ fail:
static unsigned highspeed_hubs;
+/* Called after the hub driver is unbound from a hub with children */
+static void hub_remove_children_work(void *__hub)
+{
+ struct usb_hub *hub = __hub;
+ struct usb_device *hdev = hub->hdev;
+ int i;
+
+ kfree(hub);
+
+ usb_lock_device(hdev);
+ for (i = 0; i < hdev->maxchild; ++i) {
+ if (hdev->children[i])
+ usb_disconnect(&hdev->children[i]);
+ }
+ usb_unlock_device(hdev);
+ usb_put_dev(hdev);
+}
+
static void hub_disconnect(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev;
+ int n, port1;
- if (!hub)
- return;
+ usb_set_intfdata (intf, NULL);
hdev = hub->hdev;
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
- usb_set_intfdata (intf, NULL);
-
hub_quiesce(hub);
usb_free_urb(hub->urb);
hub->urb = NULL;
@@ -746,8 +793,27 @@ static void hub_disconnect(struct usb_interface *intf)
hub->buffer = NULL;
}
- /* Free the memory */
- kfree(hub);
+ /* If there are any children then this is an unbind only, not a
+ * physical disconnection. The active ports must be disabled
+ * and later on we must call usb_disconnect(). We can't call
+ * it now because we may not hold the hub's device lock.
+ */
+ n = 0;
+ for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+ if (hdev->children[port1 - 1]) {
+ ++n;
+ hub_port_disable(hub, port1, 1);
+ }
+ }
+
+ if (n == 0)
+ kfree(hub);
+ else {
+ /* Reuse the hub->leds work_struct for our own purposes */
+ INIT_WORK(&hub->leds, hub_remove_children_work, hub);
+ schedule_work(&hub->leds);
+ usb_get_dev(hdev);
+ }
}
static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -1051,6 +1117,7 @@ void usb_disconnect(struct usb_device **pdev)
dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
usbfs_remove_device(udev);
+ usbdev_remove(udev);
usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
@@ -1290,6 +1357,7 @@ int usb_new_device(struct usb_device *udev)
/* USB device state == configured ... usable */
/* add a /proc/bus/usb entry */
+ usbdev_add(udev);
usbfs_add_device(udev);
return 0;
@@ -1428,23 +1496,6 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
return status;
}
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
- struct usb_device *hdev = hub->hdev;
- int ret;
-
- if (hdev->children[port1-1] && set_state) {
- usb_set_device_state(hdev->children[port1-1],
- USB_STATE_NOTATTACHED);
- }
- ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
- if (ret)
- dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
- port1, ret);
-
- return ret;
-}
-
/*
* Disable a port and mark a logical connnect-change event, so that some
* time later khubd will disconnect() any existing usb_device on the port
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 53bf5649621..e7fa9b5a521 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -157,6 +157,12 @@ enum hub_led_mode {
struct usb_device;
+/* Transaction Translator Think Times, in bits */
+#define HUB_TTTT_8_BITS 0x00
+#define HUB_TTTT_16_BITS 0x20
+#define HUB_TTTT_24_BITS 0x40
+#define HUB_TTTT_32_BITS 0x60
+
/*
* As of USB 2.0, full/low speed devices are segregated into trees.
* One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
@@ -170,6 +176,7 @@ struct usb_device;
struct usb_tt {
struct usb_device *hub; /* upstream highspeed hub */
int multi; /* true means one TT per port */
+ unsigned think_time; /* think time in ns */
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
spinlock_t lock;
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index c3e3a95d380..640f41e4702 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -728,15 +728,9 @@ int __init usbfs_init(void)
{
int retval;
- retval = usb_register(&usbfs_driver);
- if (retval)
- return retval;
-
retval = register_filesystem(&usb_fs_type);
- if (retval) {
- usb_deregister(&usbfs_driver);
+ if (retval)
return retval;
- }
/* create mount point for usbfs */
usbdir = proc_mkdir("usb", proc_bus);
@@ -746,7 +740,6 @@ int __init usbfs_init(void)
void usbfs_cleanup(void)
{
- usb_deregister(&usbfs_driver);
unregister_filesystem(&usb_fs_type);
if (usbdir)
remove_proc_entry("usb", proc_bus);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 88d1b376f67..c47c8052b48 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -48,7 +48,6 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
init_completion(&done);
urb->context = &done;
- urb->transfer_flags |= URB_ASYNC_UNLINK;
urb->actual_length = 0;
status = usb_submit_urb(urb, GFP_NOIO);
@@ -266,7 +265,9 @@ static void sg_complete (struct urb *urb, struct pt_regs *regs)
continue;
if (found) {
status = usb_unlink_urb (io->urbs [i]);
- if (status != -EINPROGRESS && status != -EBUSY)
+ if (status != -EINPROGRESS
+ && status != -ENODEV
+ && status != -EBUSY)
dev_err (&io->dev->dev,
"%s, unlink --> %d\n",
__FUNCTION__, status);
@@ -357,8 +358,7 @@ int usb_sg_init (
if (!io->urbs)
goto nomem;
- urb_flags = URB_ASYNC_UNLINK | URB_NO_TRANSFER_DMA_MAP
- | URB_NO_INTERRUPT;
+ urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
if (usb_pipein (pipe))
urb_flags |= URB_SHORT_NOT_OK;
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c0feee25ff0..c846fefb738 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -309,9 +309,8 @@ int usb_submit_urb(struct urb *urb, unsigned mem_flags)
unsigned int allowed;
/* enforce simple/standard policy */
- allowed = URB_ASYNC_UNLINK; // affects later unlinks
- allowed |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
- allowed |= URB_NO_INTERRUPT;
+ allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
+ URB_NO_INTERRUPT);
switch (temp) {
case PIPE_BULK:
if (is_out)
@@ -400,14 +399,8 @@ int usb_submit_urb(struct urb *urb, unsigned mem_flags)
* canceled (rather than any other code) and will quickly be removed
* from host controller data structures.
*
- * In the past, clearing the URB_ASYNC_UNLINK transfer flag for the
- * URB indicated that the request was synchronous. This usage is now
- * deprecated; if the flag is clear the call will be forwarded to
- * usb_kill_urb() and the return value will be 0. In the future, drivers
- * should call usb_kill_urb() directly for synchronous unlinking.
- *
- * When the URB_ASYNC_UNLINK transfer flag for the URB is set, this
- * request is asynchronous. Success is indicated by returning -EINPROGRESS,
+ * This request is always asynchronous.
+ * Success is indicated by returning -EINPROGRESS,
* at which time the URB will normally have been unlinked but not yet
* given back to the device driver. When it is called, the completion
* function will see urb->status == -ECONNRESET. Failure is indicated
@@ -453,17 +446,6 @@ int usb_unlink_urb(struct urb *urb)
{
if (!urb)
return -EINVAL;
- if (!(urb->transfer_flags & URB_ASYNC_UNLINK)) {
-#ifdef CONFIG_DEBUG_KERNEL
- if (printk_ratelimit()) {
- printk(KERN_NOTICE "usb_unlink_urb() is deprecated for "
- "synchronous unlinks. Use usb_kill_urb() instead.\n");
- WARN_ON(1);
- }
-#endif
- usb_kill_urb(urb);
- return 0;
- }
if (!(urb->dev && urb->dev->bus && urb->dev->bus->op))
return -ENODEV;
return urb->dev->bus->op->unlink_urb(urb, -ECONNRESET);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2cddd8a0043..087af73a59d 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -65,6 +65,16 @@ static int generic_probe (struct device *dev)
}
static int generic_remove (struct device *dev)
{
+ struct usb_device *udev = to_usb_device(dev);
+
+ /* if this is only an unbind, not a physical disconnect, then
+ * unconfigure the device */
+ if (udev->state == USB_STATE_CONFIGURED)
+ usb_set_configuration(udev, 0);
+
+ /* in case the call failed or the device was suspended */
+ if (udev->state >= USB_STATE_CONFIGURED)
+ usb_disable_device(udev, 0);
return 0;
}
@@ -912,7 +922,7 @@ int usb_trylock_device(struct usb_device *udev)
* is neither BINDING nor BOUND. Rather than sleeping to wait for the
* lock, the routine polls repeatedly. This is to prevent deadlock with
* disconnect; in some drivers (such as usb-storage) the disconnect()
- * callback will block waiting for a device reset to complete.
+ * or suspend() method will block waiting for a device reset to complete.
*
* Returns a negative error code for failure, otherwise 1 or 0 to indicate
* that the device will or will not have to be unlocked. (0 can be
@@ -922,6 +932,8 @@ int usb_trylock_device(struct usb_device *udev)
int usb_lock_device_for_reset(struct usb_device *udev,
struct usb_interface *iface)
{
+ unsigned long jiffies_expire = jiffies + HZ;
+
if (udev->state == USB_STATE_NOTATTACHED)
return -ENODEV;
if (udev->state == USB_STATE_SUSPENDED)
@@ -938,6 +950,12 @@ int usb_lock_device_for_reset(struct usb_device *udev,
}
while (!usb_trylock_device(udev)) {
+
+ /* If we can't acquire the lock after waiting one second,
+ * we're probably deadlocked */
+ if (time_after(jiffies, jiffies_expire))
+ return -EBUSY;
+
msleep(15);
if (udev->state == USB_STATE_NOTATTACHED)
return -ENODEV;
@@ -1478,13 +1496,18 @@ static int __init usb_init(void)
retval = usb_major_init();
if (retval)
goto major_init_failed;
+ retval = usb_register(&usbfs_driver);
+ if (retval)
+ goto driver_register_failed;
+ retval = usbdev_init();
+ if (retval)
+ goto usbdevice_init_failed;
retval = usbfs_init();
if (retval)
goto fs_init_failed;
retval = usb_hub_init();
if (retval)
goto hub_init_failed;
-
retval = driver_register(&usb_generic_driver);
if (!retval)
goto out;
@@ -1493,7 +1516,11 @@ static int __init usb_init(void)
hub_init_failed:
usbfs_cleanup();
fs_init_failed:
- usb_major_cleanup();
+ usbdev_cleanup();
+usbdevice_init_failed:
+ usb_deregister(&usbfs_driver);
+driver_register_failed:
+ usb_major_cleanup();
major_init_failed:
usb_host_cleanup();
host_init_failed:
@@ -1514,6 +1541,8 @@ static void __exit usb_exit(void)
driver_unregister(&usb_generic_driver);
usb_major_cleanup();
usbfs_cleanup();
+ usb_deregister(&usbfs_driver);
+ usbdev_cleanup();
usb_hub_cleanup();
usb_host_cleanup();
bus_unregister(&usb_bus_type);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 2c690f6d4c1..83d48c8133a 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -37,6 +37,11 @@ extern struct file_operations usbfs_devices_fops;
extern struct file_operations usbfs_device_file_operations;
extern void usbfs_conn_disc_event(void);
+extern int usbdev_init(void);
+extern void usbdev_cleanup(void);
+extern void usbdev_add(struct usb_device *dev);
+extern void usbdev_remove(struct usb_device *dev);
+extern struct usb_device *usbdev_lookup_minor(int minor);
struct dev_state {
struct list_head list; /* state list */
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8509e955007..49459e33e95 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2181,6 +2181,7 @@ eth_bind (struct usb_gadget *gadget)
u8 cdc = 1, zlp = 1, rndis = 1;
struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
int status = -ENOMEM;
+ int gcnum;
/* these flags are only ever cleared; compiler take note */
#ifndef DEV_CONFIG_CDC
@@ -2194,44 +2195,26 @@ eth_bind (struct usb_gadget *gadget)
* standard protocol is _strongly_ preferred for interop purposes.
* (By everyone except Microsoft.)
*/
- if (gadget_is_net2280 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
- } else if (gadget_is_dummy (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0202);
- } else if (gadget_is_pxa (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
+ if (gadget_is_pxa (gadget)) {
/* pxa doesn't support altsettings */
cdc = 0;
} else if (gadget_is_sh(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
/* sh doesn't support multiple interfaces or configs */
cdc = 0;
rndis = 0;
} else if (gadget_is_sa1100 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
/* hardware can't write zlps */
zlp = 0;
/* sa1100 CAN do CDC, without status endpoint ... we use
* non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
*/
cdc = 0;
- } else if (gadget_is_goku (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
- } else if (gadget_is_mq11xx (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
- } else if (gadget_is_omap (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
- } else if (gadget_is_lh7a40x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
- } else if (gadget_is_n9604(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
- } else if (gadget_is_pxa27x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
- } else if (gadget_is_s3c2410(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
- } else if (gadget_is_at91(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
- } else {
+ }
+
+ gcnum = usb_gadget_controller_number (gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ else {
/* can't assume CDC works. don't want to default to
* anything less functional on CDC-capable hardware,
* so we fail in this case.
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4f57085619b..a41d9d4baee 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3713,6 +3713,7 @@ static void fsg_unbind(struct usb_gadget *gadget)
static int __init check_parameters(struct fsg_dev *fsg)
{
int prot;
+ int gcnum;
/* Store the default values */
mod_data.transport_type = USB_PR_BULK;
@@ -3724,33 +3725,13 @@ static int __init check_parameters(struct fsg_dev *fsg)
mod_data.can_stall = 0;
if (mod_data.release == 0xffff) { // Parameter wasn't set
- if (gadget_is_net2280(fsg->gadget))
- mod_data.release = 0x0301;
- else if (gadget_is_dummy(fsg->gadget))
- mod_data.release = 0x0302;
- else if (gadget_is_pxa(fsg->gadget))
- mod_data.release = 0x0303;
- else if (gadget_is_sh(fsg->gadget))
- mod_data.release = 0x0304;
-
/* The sa1100 controller is not supported */
-
- else if (gadget_is_goku(fsg->gadget))
- mod_data.release = 0x0306;
- else if (gadget_is_mq11xx(fsg->gadget))
- mod_data.release = 0x0307;
- else if (gadget_is_omap(fsg->gadget))
- mod_data.release = 0x0308;
- else if (gadget_is_lh7a40x(fsg->gadget))
- mod_data.release = 0x0309;
- else if (gadget_is_n9604(fsg->gadget))
- mod_data.release = 0x0310;
- else if (gadget_is_pxa27x(fsg->gadget))
- mod_data.release = 0x0311;
- else if (gadget_is_s3c2410(gadget))
- mod_data.release = 0x0312;
- else if (gadget_is_at91(fsg->gadget))
- mod_data.release = 0x0313;
+ if (gadget_is_sa1100(fsg->gadget))
+ gcnum = -1;
+ else
+ gcnum = usb_gadget_controller_number(fsg->gadget);
+ if (gcnum >= 0)
+ mod_data.release = 0x0300 + gcnum;
else {
WARN(fsg, "controller '%s' not recognized\n",
fsg->gadget->name);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ea2eb52c766..8cbae21d84b 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -5,6 +5,7 @@
*
* This could eventually work like the ARM mach_is_*() stuff, driven by
* some config file that gets updated as new hardware is supported.
+ * (And avoiding the runtime comparisons in typical one-choice cases.)
*
* NOTE: some of these controller drivers may not be available yet.
*/
@@ -86,7 +87,61 @@
#define gadget_is_at91(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_IMX
+#define gadget_is_imx(g) !strcmp("imx_udc", (g)->name)
+#else
+#define gadget_is_imx(g) 0
+#endif
+
// CONFIG_USB_GADGET_SX2
// CONFIG_USB_GADGET_AU1X00
// ...
+
+/**
+ * usb_gadget_controller_number - support bcdDevice id convention
+ * @gadget: the controller being driven
+ *
+ * Return a 2-digit BCD value associated with the peripheral controller,
+ * suitable for use as part of a bcdDevice value, or a negative error code.
+ *
+ * NOTE: this convention is purely optional, and has no meaning in terms of
+ * any USB specification. If you want to use a different convention in your
+ * gadget driver firmware -- maybe a more formal revision ID -- feel free.
+ *
+ * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
+ * to change their behavior accordingly. For example it might help avoiding
+ * some chip bug.
+ */
+static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
+{
+ if (gadget_is_net2280(gadget))
+ return 0x01;
+ else if (gadget_is_dummy(gadget))
+ return 0x02;
+ else if (gadget_is_pxa(gadget))
+ return 0x03;
+ else if (gadget_is_sh(gadget))
+ return 0x04;
+ else if (gadget_is_sa1100(gadget))
+ return 0x05;
+ else if (gadget_is_goku(gadget))
+ return 0x06;
+ else if (gadget_is_mq11xx(gadget))
+ return 0x07;
+ else if (gadget_is_omap(gadget))
+ return 0x08;
+ else if (gadget_is_lh7a40x(gadget))
+ return 0x09;
+ else if (gadget_is_n9604(gadget))
+ return 0x10;
+ else if (gadget_is_pxa27x(gadget))
+ return 0x11;
+ else if (gadget_is_s3c2410(gadget))
+ return 0x12;
+ else if (gadget_is_at91(gadget))
+ return 0x13;
+ else if (gadget_is_imx(gadget))
+ return 0x14;
+ return -ENOENT;
+}
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 9e4f1c6935a..c925d9222f5 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1422,49 +1422,20 @@ static int gs_bind(struct usb_gadget *gadget)
int ret;
struct usb_ep *ep;
struct gs_dev *dev;
+ int gcnum;
- /* device specific */
- if (gadget_is_net2280(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0001);
- } else if (gadget_is_pxa(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0002);
- } else if (gadget_is_sh(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0003);
- /* sh doesn't support multiple interfaces or configs */
+ /* Some controllers can't support CDC ACM:
+ * - sh doesn't support multiple interfaces or configs;
+ * - sa1100 doesn't have a third interrupt endpoint
+ */
+ if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
use_acm = 0;
- } else if (gadget_is_sa1100(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0004);
- /* sa1100 doesn't support necessary endpoints */
- use_acm = 0;
- } else if (gadget_is_goku(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0005);
- } else if (gadget_is_mq11xx(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0006);
- } else if (gadget_is_omap(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0007);
- } else if (gadget_is_lh7a40x(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0008);
- } else if (gadget_is_n9604(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0009);
- } else if (gadget_is_pxa27x(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0011);
- } else if (gadget_is_s3c2410(gadget)) {
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0012);
- } else if (gadget_is_at91(gadget)) {
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0)
gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0013);
- } else {
+ cpu_to_le16(GS_VERSION_NUM | gcnum);
+ else {
printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
gadget->name);
/* unrecognized, but safe unless bulk is REALLY quirky */
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index bb9b2d94eed..6890e773b2a 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1139,6 +1139,13 @@ zero_bind (struct usb_gadget *gadget)
{
struct zero_dev *dev;
struct usb_ep *ep;
+ int gcnum;
+
+ /* FIXME this can't yet work right with SH ... it has only
+ * one configuration, numbered one.
+ */
+ if (gadget_is_sh(gadget))
+ return -ENODEV;
/* Bulk-only drivers like this one SHOULD be able to
* autoconfigure on any sane usb controller driver,
@@ -1161,43 +1168,10 @@ autoconf_fail:
EP_OUT_NAME = ep->name;
ep->driver_data = ep; /* claim */
-
- /*
- * DRIVER POLICY CHOICE: you may want to do this differently.
- * One thing to avoid is reusing a bcdDevice revision code
- * with different host-visible configurations or behavior
- * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
- */
- if (gadget_is_net2280 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
- } else if (gadget_is_pxa (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
-#if 0
- } else if (gadget_is_sh(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
- /* SH has only one configuration; see "loopdefault" */
- device_desc.bNumConfigurations = 1;
- /* FIXME make 1 == default.bConfigurationValue */
-#endif
- } else if (gadget_is_sa1100 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
- } else if (gadget_is_goku (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
- } else if (gadget_is_mq11xx (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
- } else if (gadget_is_omap (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
- } else if (gadget_is_lh7a40x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
- } else if (gadget_is_n9604(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
- } else if (gadget_is_pxa27x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
- } else if (gadget_is_s3c2410(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
- } else if (gadget_is_at91(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
- } else {
+ gcnum = usb_gadget_controller_number (gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
* so warn about unrcognized controllers, don't panic.
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 20df01a79b2..940d38ca7d9 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -677,6 +677,9 @@ qh_make (
goto done;
}
} else {
+ struct usb_tt *tt = urb->dev->tt;
+ int think_time;
+
/* gap is f(FS/LS transfer times) */
qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
is_input, 0, maxp) / (125 * 1000);
@@ -690,6 +693,10 @@ qh_make (
qh->c_usecs = HS_USECS (0);
}
+ think_time = tt ? tt->think_time : 0;
+ qh->tt_usecs = NS_TO_US (think_time +
+ usb_calc_bus_time (urb->dev->speed,
+ is_input, 0, max_packet (maxp)));
qh->period = urb->interval;
}
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 4c972b57c7c..ccc7300baa6 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -700,6 +700,7 @@ iso_stream_init (
} else {
u32 addr;
+ int think_time;
addr = dev->ttport << 24;
if (!ehci_is_TDI(ehci)
@@ -709,6 +710,9 @@ iso_stream_init (
addr |= epnum << 8;
addr |= dev->devnum;
stream->usecs = HS_USECS_ISO (maxp);
+ think_time = dev->tt ? dev->tt->think_time : 0;
+ stream->tt_usecs = NS_TO_US (think_time + usb_calc_bus_time (
+ dev->speed, is_input, 1, maxp));
if (is_input) {
u32 tmp;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index a7542157534..20c9b550097 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -421,6 +421,7 @@ struct ehci_qh {
u8 usecs; /* intr bandwidth */
u8 gap_uf; /* uframes split/csplit gap */
u8 c_usecs; /* ... split completion bw */
+ u16 tt_usecs; /* tt downstream bandwidth */
unsigned short period; /* polling interval */
unsigned short start; /* where polling starts */
#define NO_FRAME ((unsigned short)~0) /* pick new start */
@@ -479,6 +480,7 @@ struct ehci_iso_stream {
*/
u8 interval;
u8 usecs, c_usecs;
+ u16 tt_usecs;
u16 maxp;
u16 raw_mask;
unsigned bandwidth;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 75128c37180..41bbae83fc7 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -83,7 +83,7 @@
#include "../core/hcd.h"
#include "isp116x.h"
-#define DRIVER_VERSION "08 Apr 2005"
+#define DRIVER_VERSION "05 Aug 2005"
#define DRIVER_DESC "ISP116x USB Host Controller Driver"
MODULE_DESCRIPTION(DRIVER_DESC);
@@ -629,14 +629,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
ERR("Unrecoverable error\n");
/* What should we do here? Reset? */
}
- if (intstat & HCINT_RHSC) {
- isp116x->rhstatus =
- isp116x_read_reg32(isp116x, HCRHSTATUS);
- isp116x->rhport[0] =
- isp116x_read_reg32(isp116x, HCRHPORT1);
- isp116x->rhport[1] =
- isp116x_read_reg32(isp116x, HCRHPORT2);
- }
+ if (intstat & HCINT_RHSC)
+ /* When root hub or any of its ports is going
+ to come out of suspend, it may take more
+ than 10ms for status bits to stabilize. */
+ mod_timer(&hcd->rh_timer, jiffies
+ + msecs_to_jiffies(20) + 1);
if (intstat & HCINT_RD) {
DBG("---- remote wakeup\n");
schedule_work(&isp116x->rh_resume);
@@ -925,20 +923,27 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
int ports, i, changed = 0;
+ unsigned long flags;
if (!HC_IS_RUNNING(hcd->state))
return -ESHUTDOWN;
- ports = isp116x->rhdesca & RH_A_NDP;
+ /* Report no status change now, if we are scheduled to be
+ called later */
+ if (timer_pending(&hcd->rh_timer))
+ return 0;
- /* init status */
+ ports = isp116x->rhdesca & RH_A_NDP;
+ spin_lock_irqsave(&isp116x->lock, flags);
+ isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
buf[0] = changed = 1;
else
buf[0] = 0;
for (i = 0; i < ports; i++) {
- u32 status = isp116x->rhport[i];
+ u32 status = isp116x->rhport[i] =
+ isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
@@ -947,6 +952,7 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
continue;
}
}
+ spin_unlock_irqrestore(&isp116x->lock, flags);
return changed;
}
@@ -1463,10 +1469,6 @@ static int isp116x_sw_reset(struct isp116x *isp116x)
return ret;
}
-/*
- Reset. Tries to perform platform-specific hardware
- reset first; falls back to software reset.
-*/
static int isp116x_reset(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
@@ -1474,17 +1476,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
u16 clkrdy = 0;
int ret = 0, timeout = 15 /* ms */ ;
- if (isp116x->board && isp116x->board->reset) {
- /* Hardware reset */
- isp116x->board->reset(hcd->self.controller, 1);
- msleep(10);
- if (isp116x->board->clock)
- isp116x->board->clock(hcd->self.controller, 1);
- msleep(1);
- isp116x->board->reset(hcd->self.controller, 0);
- } else
- ret = isp116x_sw_reset(isp116x);
-
+ ret = isp116x_sw_reset(isp116x);
if (ret)
return ret;
@@ -1501,10 +1493,7 @@ static int isp116x_reset(struct usb_hcd *hcd)
ERR("Clock not ready after 20ms\n");
/* After sw_reset the clock won't report to be ready, if
H_WAKEUP pin is high. */
- if (!isp116x->board || !isp116x->board->reset)
- ERR("The driver does not support hardware wakeup.\n");
- ERR("Please make sure that the H_WAKEUP pin "
- "is pulled low!\n");
+ ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
ret = -ENODEV;
}
return ret;
@@ -1527,15 +1516,7 @@ static void isp116x_stop(struct usb_hcd *hcd)
isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
spin_unlock_irqrestore(&isp116x->lock, flags);
- /* Put the chip into reset state */
- if (isp116x->board && isp116x->board->reset)
- isp116x->board->reset(hcd->self.controller, 0);
- else
- isp116x_sw_reset(isp116x);
-
- /* Stop the clock */
- if (isp116x->board && isp116x->board->clock)
- isp116x->board->clock(hcd->self.controller, 0);
+ isp116x_sw_reset(isp116x);
}
/*
@@ -1561,6 +1542,9 @@ static int isp116x_start(struct usb_hcd *hcd)
return -ENODEV;
}
+ /* To be removed in future */
+ hcd->uses_new_polling = 1;
+
isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
@@ -1569,7 +1553,7 @@ static int isp116x_start(struct usb_hcd *hcd)
if (board->sel15Kres)
val |= HCHWCFG_15KRSEL;
/* Remote wakeup won't work without working clock */
- if (board->clknotstop || board->remote_wakeup_enable)
+ if (board->remote_wakeup_enable)
val |= HCHWCFG_CLKNOTSTOP;
if (board->oc_enable)
val |= HCHWCFG_ANALOG_OC;
@@ -1580,16 +1564,13 @@ static int isp116x_start(struct usb_hcd *hcd)
isp116x_write_reg16(isp116x, HCHWCFG, val);
/* ----- Root hub conf */
- val = 0;
- /* AN10003_1.pdf recommends NPS to be always 1 */
- if (board->no_power_switching)
- val |= RH_A_NPS;
- if (board->power_switching_mode)
- val |= RH_A_PSM;
- if (board->potpg)
- val |= (board->potpg << 24) & RH_A_POTPGT;
- else
- val |= (25 << 24) & RH_A_POTPGT;
+ val = (25 << 24) & RH_A_POTPGT;
+ /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+ be always set. Yet, instead, we request individual port
+ power switching. */
+ val |= RH_A_PSM;
+ /* Report overcurrent per port */
+ val |= RH_A_OCPM;
isp116x_write_reg32(isp116x, HCRHDESCA, val);
isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
@@ -1619,9 +1600,6 @@ static int isp116x_start(struct usb_hcd *hcd)
/* Go operational */
val = HCCONTROL_USB_OPER;
- /* Remote wakeup connected - NOT SUPPORTED */
- /* if (board->remote_wakeup_connected)
- val |= HCCONTROL_RWC; */
if (board->remote_wakeup_enable)
val |= HCCONTROL_RWE;
isp116x_write_reg32(isp116x, HCCONTROL, val);
@@ -1670,7 +1648,7 @@ static int __init_or_module isp116x_remove(struct device *dev)
struct platform_device *pdev;
struct resource *res;
- if(!hcd)
+ if (!hcd)
return 0;
isp116x = hcd_to_isp116x(hcd);
pdev = container_of(dev, struct platform_device, dev);
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 17964c39d06..25153336302 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -14,8 +14,6 @@
* This file is licenced under the GPL.
*/
-#include <asm/usb.h>
-
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -23,9 +21,7 @@
* usb_hcd_ppc_soc_probe - initialize On-Chip HCDs
* Context: !in_interrupt()
*
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
+ * Allocates basic resources for this USB host controller.
*
* Store this function in the HCD's struct pci_driver as probe().
*/
@@ -37,7 +33,6 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
struct ohci_hcd *ohci;
struct resource *res;
int irq;
- struct usb_hcd_platform_data *pd = pdev->dev.platform_data;
pr_debug("initializing PPC-SOC USB Controller\n");
@@ -73,9 +68,6 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
goto err2;
}
- if (pd->start && (retval = pd->start(pdev)))
- goto err3;
-
ohci = hcd_to_ohci(hcd);
ohci->flags |= OHCI_BIG_ENDIAN;
ohci_hcd_init(ohci);
@@ -85,9 +77,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
return retval;
pr_debug("Removing PPC-SOC USB Controller\n");
- if (pd && pd->stop)
- pd->stop(pdev);
- err3:
+
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -105,25 +95,21 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
* @pdev: USB Host Controller being removed
* Context: !in_interrupt()
*
- * Reverses the effect of usb_hcd_ppc_soc_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
+ * Reverses the effect of usb_hcd_ppc_soc_probe().
+ * It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
- struct usb_hcd_platform_data *pd = pdev->dev.platform_data;
-
usb_remove_hcd(hcd);
pr_debug("stopping PPC-SOC USB Controller\n");
- if (pd && pd->stop)
- pd->stop(pdev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_hcd_put(hcd);
+ usb_put_hcd(hcd);
}
static int __devinit
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index e9401662503..3d9bcf78a9a 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -129,7 +129,7 @@ static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
if (info->power_control != NULL) {
info->port[port-1].power = to;
- (info->power_control)(port, to);
+ (info->power_control)(port-1, to);
}
}
@@ -339,8 +339,8 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
struct usb_hcd *hcd = NULL;
int retval;
- s3c2410_usb_set_power(dev->dev.platform_data, 0, 1);
s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
+ s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
if (hcd == NULL)
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 298e4a25e3d..482c4be521f 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -230,6 +230,20 @@ config USB_EGALAX
To compile this driver as a module, choose M here: the
module will be called touchkitusb.
+config USB_YEALINK
+ tristate "Yealink usb-p1k voip phone"
+ depends on USB && INPUT && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to enable keyboard and LCD functions of the
+ Yealink usb-p1k usb phones. The audio part is enabled by the generic
+ usb sound driver, so you might want to enable that as well.
+
+ For information about how to use these additional functions, see
+ <file:Documentation/input/yealink.txt>.
+
+ To compile this driver as a module, choose M here: the module will be
+ called yealink.
+
config USB_XPAD
tristate "X-Box gamepad support"
depends on USB && INPUT
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index f1547be632d..43b2f999edf 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
obj-$(CONFIG_USB_ACECAD) += acecad.o
+obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index b2cb2b35892..1ab95d24c5e 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1444,6 +1444,8 @@ void hid_init_reports(struct hid_device *hid)
#define USB_DEVICE_ID_NETWORKANALYSER 0x2020
#define USB_DEVICE_ID_POWERCONTROL 0x2030
+#define USB_VENDOR_ID_APPLE 0x05ac
+#define USB_DEVICE_ID_APPLE_BLUETOOTH 0x1000
/*
* Alphabetically sorted blacklist by quirk type.
@@ -1462,6 +1464,7 @@ static struct hid_blacklist {
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_BLUETOOTH, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24, HID_QUIRK_IGNORE },
@@ -1685,7 +1688,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0,
hid_irq_in, hid, interval);
hid->urbin->transfer_dma = hid->inbuf_dma;
- hid->urbin->transfer_flags |=(URB_NO_TRANSFER_DMA_MAP | URB_ASYNC_UNLINK);
+ hid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
} else {
if (hid->urbout)
continue;
@@ -1695,7 +1698,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
usb_fill_int_urb(hid->urbout, dev, pipe, hid->outbuf, 0,
hid_irq_out, hid, interval);
hid->urbout->transfer_dma = hid->outbuf_dma;
- hid->urbout->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_ASYNC_UNLINK);
+ hid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
}
}
@@ -1747,7 +1750,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
hid->ctrlbuf, 1, hid_ctrl, hid);
hid->urbctrl->setup_dma = hid->cr_dma;
hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
- hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP | URB_ASYNC_UNLINK);
+ hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
return hid;
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 67dc9368520..99de1b33c07 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -431,11 +431,6 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
- /* See if the offered device matches what we can accept */
- if ((udev->descriptor.idVendor != USB_KEYSPAN_VENDOR_ID) ||
- (udev->descriptor.idProduct != USB_KEYSPAN_PRODUCT_UIA11) )
- return -ENODEV;
-
/* allocate memory for our device state and initialize it */
remote = kmalloc(sizeof(*remote), GFP_KERNEL);
if (remote == NULL) {
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h
new file mode 100644
index 00000000000..52ff27f1512
--- /dev/null
+++ b/drivers/usb/input/map_to_7segment.h
@@ -0,0 +1,189 @@
+/*
+ * drivers/usb/input/map_to_7segment.h
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MAP_TO_7SEGMENT_H
+#define MAP_TO_7SEGMENT_H
+
+/* This file provides translation primitives and tables for the conversion
+ * of (ASCII) characters to a 7-segments notation.
+ *
+ * The 7 segment's wikipedia notation below is used as standard.
+ * See: http://en.wikipedia.org/wiki/Seven_segment_display
+ *
+ * Notation: +-a-+
+ * f b
+ * +-g-+
+ * e c
+ * +-d-+
+ *
+ * Usage:
+ *
+ * Register a map variable, and fill it with a character set:
+ * static SEG7_DEFAULT_MAP(map_seg7);
+ *
+ *
+ * Then use for conversion:
+ * seg7 = map_to_seg7(&map_seg7, some_char);
+ * ...
+ *
+ * In device drivers it is recommended, if required, to make the char map
+ * accessible via the sysfs interface using the following scheme:
+ *
+ * static ssize_t show_map(struct device *dev, char *buf) {
+ * memcpy(buf, &map_seg7, sizeof(map_seg7));
+ * return sizeof(map_seg7);
+ * }
+ * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
+ * if(cnt != sizeof(map_seg7))
+ * return -EINVAL;
+ * memcpy(&map_seg7, buf, cnt);
+ * return cnt;
+ * }
+ * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
+ *
+ * History:
+ * 2005-05-31 RFC linux-kernel@vger.kernel.org
+ */
+#include <linux/errno.h>
+
+
+#define BIT_SEG7_A 0
+#define BIT_SEG7_B 1
+#define BIT_SEG7_C 2
+#define BIT_SEG7_D 3
+#define BIT_SEG7_E 4
+#define BIT_SEG7_F 5
+#define BIT_SEG7_G 6
+#define BIT_SEG7_RESERVED 7
+
+struct seg7_conversion_map {
+ unsigned char table[128];
+};
+
+static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
+{
+ return c & 0x7f ? map->table[c] : -EINVAL;
+}
+
+#define SEG7_CONVERSION_MAP(_name, _map) \
+ struct seg7_conversion_map _name = { .table = { _map } }
+
+/*
+ * It is recommended to use a facility that allows user space to redefine
+ * custom character sets for LCD devices. Please use a sysfs interface
+ * as described above.
+ */
+#define MAP_TO_SEG7_SYSFS_FILE "map_seg7"
+
+/*******************************************************************************
+ * ASCII conversion table
+ ******************************************************************************/
+
+#define _SEG7(l,a,b,c,d,e,f,g) \
+ ( a<<BIT_SEG7_A | b<<BIT_SEG7_B | c<<BIT_SEG7_C | d<<BIT_SEG7_D | \
+ e<<BIT_SEG7_E | f<<BIT_SEG7_F | g<<BIT_SEG7_G )
+
+#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+
+#define _MAP_33_47_ASCII_SEG7_SYMBOL \
+ _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
+ _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
+ _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
+ _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
+ _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
+
+#define _MAP_48_57_ASCII_SEG7_NUMERIC \
+ _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
+ _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
+ _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
+ _SEG7('9',1,1,1,1,0,1,1),
+
+#define _MAP_58_64_ASCII_SEG7_SYMBOL \
+ _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
+ _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
+ _SEG7('@',1,1,0,1,1,1,1),
+
+#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
+ _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
+ _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
+ _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_91_96_ASCII_SEG7_SYMBOL \
+ _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
+ _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
+
+#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
+ _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
+ _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
+ _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_123_126_ASCII_SEG7_SYMBOL \
+ _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
+ _SEG7('~',1,0,0,0,0,0,0),
+
+/* Maps */
+
+/* This set tries to map as close as possible to the visible characteristics
+ * of the ASCII symbol, lowercase and uppercase letters may differ in
+ * presentation on the display.
+ */
+#define MAP_ASCII7SEG_ALPHANUM \
+ _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
+ _MAP_33_47_ASCII_SEG7_SYMBOL \
+ _MAP_48_57_ASCII_SEG7_NUMERIC \
+ _MAP_58_64_ASCII_SEG7_SYMBOL \
+ _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
+ _MAP_91_96_ASCII_SEG7_SYMBOL \
+ _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _MAP_123_126_ASCII_SEG7_SYMBOL
+
+/* This set tries to map as close as possible to the symbolic characteristics
+ * of the ASCII character for maximum discrimination.
+ * For now this means all alpha chars are in lower case representations.
+ * (This for example facilitates the use of hex numbers with uppercase input.)
+ */
+#define MAP_ASCII7SEG_ALPHANUM_LC \
+ _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
+ _MAP_33_47_ASCII_SEG7_SYMBOL \
+ _MAP_48_57_ASCII_SEG7_NUMERIC \
+ _MAP_58_64_ASCII_SEG7_SYMBOL \
+ _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _MAP_91_96_ASCII_SEG7_SYMBOL \
+ _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
+ _MAP_123_126_ASCII_SEG7_SYMBOL
+
+#define SEG7_DEFAULT_MAP(_name) \
+ SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
+
+#endif /* MAP_TO_7SEGMENT_H */
+
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
new file mode 100644
index 00000000000..58a176ef96a
--- /dev/null
+++ b/drivers/usb/input/yealink.c
@@ -0,0 +1,1013 @@
+/*
+ * drivers/usb/input/yealink.c
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/*
+ * Description:
+ * Driver for the USB-P1K voip usb phone.
+ * This device is produced by Yealink Network Technology Co Ltd
+ * but may be branded under several names:
+ * - Yealink usb-p1k
+ * - Tiptel 115
+ * - ...
+ *
+ * This driver is based on:
+ * - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/
+ * - information from http://memeteau.free.fr/usbb2k
+ * - the xpad-driver drivers/usb/input/xpad.c
+ *
+ * Thanks to:
+ * - Olivier Vandorpe, for providing the usbb2k-api.
+ * - Martin Diehl, for spotting my memory allocation bug.
+ *
+ * History:
+ * 20050527 henk First version, functional keyboard. Keyboard events
+ * will pop-up on the ../input/eventX bus.
+ * 20050531 henk Added led, LCD, dialtone and sysfs interface.
+ * 20050610 henk Cleanups, make it ready for public consumption.
+ * 20050630 henk Cleanups, fixes in response to comments.
+ * 20050701 henk sysfs write serialisation, fix potential unload races
+ * 20050801 henk Added ringtone, restructure USB
+ * 20050816 henk Merge 2.6.13-rc6
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/rwsem.h>
+#include <linux/usb.h>
+
+#include "map_to_7segment.h"
+#include "yealink.h"
+
+#define DRIVER_VERSION "yld-20050816"
+#define DRIVER_AUTHOR "Henk Vergonet"
+#define DRIVER_DESC "Yealink phone driver"
+
+#define YEALINK_POLLING_FREQUENCY 10 /* in [Hz] */
+
+struct yld_status {
+ u8 lcd[24];
+ u8 led;
+ u8 dialtone;
+ u8 ringtone;
+ u8 keynum;
+} __attribute__ ((packed));
+
+/*
+ * Register the LCD segment and icon map
+ */
+#define _LOC(k,l) { .a = (k), .m = (l) }
+#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm) \
+ { .type = (t), \
+ .u = { .s = { _LOC(a, am), _LOC(b, bm), _LOC(c, cm), \
+ _LOC(d, dm), _LOC(e, em), _LOC(g, gm), \
+ _LOC(f, fm) } } }
+#define _PIC(t, h, hm, n) \
+ { .type = (t), \
+ .u = { .p = { .name = (n), .a = (h), .m = (hm) } } }
+
+static const struct lcd_segment_map {
+ char type;
+ union {
+ struct pictogram_map {
+ u8 a,m;
+ char name[10];
+ } p;
+ struct segment_map {
+ u8 a,m;
+ } s[7];
+ } u;
+} lcdMap[] = {
+#include "yealink.h"
+};
+
+struct yealink_dev {
+ struct input_dev idev; /* input device */
+ struct usb_device *udev; /* usb device */
+
+ /* irq input channel */
+ struct yld_ctl_packet *irq_data;
+ dma_addr_t irq_dma;
+ struct urb *urb_irq;
+
+ /* control output channel */
+ struct yld_ctl_packet *ctl_data;
+ dma_addr_t ctl_dma;
+ struct usb_ctrlrequest *ctl_req;
+ dma_addr_t ctl_req_dma;
+ struct urb *urb_ctl;
+
+ char phys[64]; /* physical device path */
+
+ u8 lcdMap[ARRAY_SIZE(lcdMap)]; /* state of LCD, LED ... */
+ int key_code; /* last reported key */
+
+ int stat_ix;
+ union {
+ struct yld_status s;
+ u8 b[sizeof(struct yld_status)];
+ } master, copy;
+};
+
+
+/*******************************************************************************
+ * Yealink lcd interface
+ ******************************************************************************/
+
+/*
+ * Register a default 7 segment character set
+ */
+static SEG7_DEFAULT_MAP(map_seg7);
+
+ /* Display a char,
+ * char '\9' and '\n' are placeholders and do not overwrite the original text.
+ * A space will always hide an icon.
+ */
+static int setChar(struct yealink_dev *yld, int el, int chr)
+{
+ int i, a, m, val;
+
+ if (el >= ARRAY_SIZE(lcdMap))
+ return -EINVAL;
+
+ if (chr == '\t' || chr == '\n')
+ return 0;
+
+ yld->lcdMap[el] = chr;
+
+ if (lcdMap[el].type == '.') {
+ a = lcdMap[el].u.p.a;
+ m = lcdMap[el].u.p.m;
+ if (chr != ' ')
+ yld->master.b[a] |= m;
+ else
+ yld->master.b[a] &= ~m;
+ return 0;
+ }
+
+ val = map_to_seg7(&map_seg7, chr);
+ for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) {
+ m = lcdMap[el].u.s[i].m;
+
+ if (m == 0)
+ continue;
+
+ a = lcdMap[el].u.s[i].a;
+ if (val & 1)
+ yld->master.b[a] |= m;
+ else
+ yld->master.b[a] &= ~m;
+ val = val >> 1;
+ }
+ return 0;
+};
+
+/*******************************************************************************
+ * Yealink key interface
+ ******************************************************************************/
+
+/* Map device buttons to internal key events.
+ *
+ * USB-P1K button layout:
+ *
+ * up
+ * IN OUT
+ * down
+ *
+ * pickup C hangup
+ * 1 2 3
+ * 4 5 6
+ * 7 8 9
+ * * 0 #
+ *
+ * The "up" and "down" keys, are symbolised by arrows on the button.
+ * The "pickup" and "hangup" keys are symbolised by a green and red phone
+ * on the button.
+ */
+static int map_p1k_to_key(int scancode)
+{
+ switch(scancode) { /* phone key: */
+ case 0x23: return KEY_LEFT; /* IN */
+ case 0x33: return KEY_UP; /* up */
+ case 0x04: return KEY_RIGHT; /* OUT */
+ case 0x24: return KEY_DOWN; /* down */
+ case 0x03: return KEY_ENTER; /* pickup */
+ case 0x14: return KEY_BACKSPACE; /* C */
+ case 0x13: return KEY_ESC; /* hangup */
+ case 0x00: return KEY_1; /* 1 */
+ case 0x01: return KEY_2; /* 2 */
+ case 0x02: return KEY_3; /* 3 */
+ case 0x10: return KEY_4; /* 4 */
+ case 0x11: return KEY_5; /* 5 */
+ case 0x12: return KEY_6; /* 6 */
+ case 0x20: return KEY_7; /* 7 */
+ case 0x21: return KEY_8; /* 8 */
+ case 0x22: return KEY_9; /* 9 */
+ case 0x30: return KEY_KPASTERISK; /* * */
+ case 0x31: return KEY_0; /* 0 */
+ case 0x32: return KEY_LEFTSHIFT |
+ KEY_3 << 8; /* # */
+ }
+ return -EINVAL;
+}
+
+/* Completes a request by converting the data into events for the
+ * input subsystem.
+ *
+ * The key parameter can be cascaded: key2 << 8 | key1
+ */
+static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs)
+{
+ struct input_dev *idev = &yld->idev;
+
+ input_regs(idev, regs);
+ if (yld->key_code >= 0) {
+ /* old key up */
+ input_report_key(idev, yld->key_code & 0xff, 0);
+ if (yld->key_code >> 8)
+ input_report_key(idev, yld->key_code >> 8, 0);
+ }
+
+ yld->key_code = key;
+ if (key >= 0) {
+ /* new valid key */
+ input_report_key(idev, key & 0xff, 1);
+ if (key >> 8)
+ input_report_key(idev, key >> 8, 1);
+ }
+ input_sync(idev);
+}
+
+/*******************************************************************************
+ * Yealink usb communication interface
+ ******************************************************************************/
+
+static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p)
+{
+ u8 *buf = (u8 *)p;
+ int i;
+ u8 sum = 0;
+
+ for(i=0; i<USB_PKT_LEN-1; i++)
+ sum -= buf[i];
+ p->sum = sum;
+ return usb_control_msg(yld->udev,
+ usb_sndctrlpipe(yld->udev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0x200, 3,
+ p, sizeof(*p),
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static u8 default_ringtone[] = {
+ 0xEF, /* volume [0-255] */
+ 0xFB, 0x1E, 0x00, 0x0C, /* 1250 [hz], 12/100 [s] */
+ 0xFC, 0x18, 0x00, 0x0C, /* 1000 [hz], 12/100 [s] */
+ 0xFB, 0x1E, 0x00, 0x0C,
+ 0xFC, 0x18, 0x00, 0x0C,
+ 0xFB, 0x1E, 0x00, 0x0C,
+ 0xFC, 0x18, 0x00, 0x0C,
+ 0xFB, 0x1E, 0x00, 0x0C,
+ 0xFC, 0x18, 0x00, 0x0C,
+ 0xFF, 0xFF, 0x01, 0x90, /* silent, 400/100 [s] */
+ 0x00, 0x00 /* end of sequence */
+};
+
+static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size)
+{
+ struct yld_ctl_packet *p = yld->ctl_data;
+ int ix, len;
+
+ if (size <= 0)
+ return -EINVAL;
+
+ /* Set the ringtone volume */
+ memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+ yld->ctl_data->cmd = CMD_RING_VOLUME;
+ yld->ctl_data->size = 1;
+ yld->ctl_data->data[0] = buf[0];
+ yealink_cmd(yld, p);
+
+ buf++;
+ size--;
+
+ p->cmd = CMD_RING_NOTE;
+ ix = 0;
+ while (size != ix) {
+ len = size - ix;
+ if (len > sizeof(p->data))
+ len = sizeof(p->data);
+ p->size = len;
+ p->offset = cpu_to_be16(ix);
+ memcpy(p->data, &buf[ix], len);
+ yealink_cmd(yld, p);
+ ix += len;
+ }
+ return 0;
+}
+
+/* keep stat_master & stat_copy in sync.
+ */
+static int yealink_do_idle_tasks(struct yealink_dev *yld)
+{
+ u8 val;
+ int i, ix, len;
+
+ ix = yld->stat_ix;
+
+ memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+ yld->ctl_data->cmd = CMD_KEYPRESS;
+ yld->ctl_data->size = 1;
+ yld->ctl_data->sum = 0xff - CMD_KEYPRESS;
+
+ /* If state update pointer wraps do a KEYPRESS first. */
+ if (ix >= sizeof(yld->master)) {
+ yld->stat_ix = 0;
+ return 0;
+ }
+
+ /* find update candidates: copy != master */
+ do {
+ val = yld->master.b[ix];
+ if (val != yld->copy.b[ix])
+ goto send_update;
+ } while (++ix < sizeof(yld->master));
+
+ /* nothing todo, wait a bit and poll for a KEYPRESS */
+ yld->stat_ix = 0;
+ /* TODO how can we wait abit. ??
+ * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY);
+ */
+ return 0;
+
+send_update:
+
+ /* Setup an appropriate update request */
+ yld->copy.b[ix] = val;
+ yld->ctl_data->data[0] = val;
+
+ switch(ix) {
+ case offsetof(struct yld_status, led):
+ yld->ctl_data->cmd = CMD_LED;
+ yld->ctl_data->sum = -1 - CMD_LED - val;
+ break;
+ case offsetof(struct yld_status, dialtone):
+ yld->ctl_data->cmd = CMD_DIALTONE;
+ yld->ctl_data->sum = -1 - CMD_DIALTONE - val;
+ break;
+ case offsetof(struct yld_status, ringtone):
+ yld->ctl_data->cmd = CMD_RINGTONE;
+ yld->ctl_data->sum = -1 - CMD_RINGTONE - val;
+ break;
+ case offsetof(struct yld_status, keynum):
+ val--;
+ val &= 0x1f;
+ yld->ctl_data->cmd = CMD_SCANCODE;
+ yld->ctl_data->offset = cpu_to_be16(val);
+ yld->ctl_data->data[0] = 0;
+ yld->ctl_data->sum = -1 - CMD_SCANCODE - val;
+ break;
+ default:
+ len = sizeof(yld->master.s.lcd) - ix;
+ if (len > sizeof(yld->ctl_data->data))
+ len = sizeof(yld->ctl_data->data);
+
+ /* Combine up to <len> consecutive LCD bytes in a singe request
+ */
+ yld->ctl_data->cmd = CMD_LCD;
+ yld->ctl_data->offset = cpu_to_be16(ix);
+ yld->ctl_data->size = len;
+ yld->ctl_data->sum = -CMD_LCD - ix - val - len;
+ for(i=1; i<len; i++) {
+ ix++;
+ val = yld->master.b[ix];
+ yld->copy.b[ix] = val;
+ yld->ctl_data->data[i] = val;
+ yld->ctl_data->sum -= val;
+ }
+ }
+ yld->stat_ix = ix + 1;
+ return 1;
+}
+
+/* Decide on how to handle responses
+ *
+ * The state transition diagram is somethhing like:
+ *
+ * syncState<--+
+ * | |
+ * | idle
+ * \|/ |
+ * init --ok--> waitForKey --ok--> getKey
+ * ^ ^ |
+ * | +-------ok-------+
+ * error,start
+ *
+ */
+static void urb_irq_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct yealink_dev *yld = urb->context;
+ int ret;
+
+ if (urb->status)
+ err("%s - urb status %d", __FUNCTION__, urb->status);
+
+ switch (yld->irq_data->cmd) {
+ case CMD_KEYPRESS:
+
+ yld->master.s.keynum = yld->irq_data->data[0];
+ break;
+
+ case CMD_SCANCODE:
+ dbg("get scancode %x", yld->irq_data->data[0]);
+
+ report_key(yld, map_p1k_to_key(yld->irq_data->data[0]), regs);
+ break;
+
+ default:
+ err("unexpected response %x", yld->irq_data->cmd);
+ }
+
+ yealink_do_idle_tasks(yld);
+
+ ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+ if (ret)
+ err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+}
+
+static void urb_ctl_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct yealink_dev *yld = urb->context;
+ int ret;
+
+ if (urb->status)
+ err("%s - urb status %d", __FUNCTION__, urb->status);
+
+ switch (yld->ctl_data->cmd) {
+ case CMD_KEYPRESS:
+ case CMD_SCANCODE:
+ /* ask for a response */
+ ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
+ break;
+ default:
+ /* send new command */
+ yealink_do_idle_tasks(yld);
+ ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+ }
+
+ if (ret)
+ err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+}
+
+/*******************************************************************************
+ * input event interface
+ ******************************************************************************/
+
+/* TODO should we issue a ringtone on a SND_BELL event?
+static int input_ev(struct input_dev *dev, unsigned int type,
+ unsigned int code, int value)
+{
+
+ if (type != EV_SND)
+ return -EINVAL;
+
+ switch (code) {
+ case SND_BELL:
+ case SND_TONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+*/
+
+static int input_open(struct input_dev *dev)
+{
+ struct yealink_dev *yld = dev->private;
+ int i, ret;
+
+ dbg("%s", __FUNCTION__);
+
+ /* force updates to device */
+ for (i = 0; i<sizeof(yld->master); i++)
+ yld->copy.b[i] = ~yld->master.b[i];
+ yld->key_code = -1; /* no keys pressed */
+
+ yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone));
+
+ /* issue INIT */
+ memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data)));
+ yld->ctl_data->cmd = CMD_INIT;
+ yld->ctl_data->size = 10;
+ yld->ctl_data->sum = 0x100-CMD_INIT-10;
+ if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
+ dbg("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static void input_close(struct input_dev *dev)
+{
+ struct yealink_dev *yld = dev->private;
+
+ usb_kill_urb(yld->urb_ctl);
+ usb_kill_urb(yld->urb_irq);
+}
+
+/*******************************************************************************
+ * sysfs interface
+ ******************************************************************************/
+
+static DECLARE_RWSEM(sysfs_rwsema);
+
+/* Interface to the 7-segments translation table aka. char set.
+ */
+static ssize_t show_map(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ memcpy(buf, &map_seg7, sizeof(map_seg7));
+ return sizeof(map_seg7);
+}
+
+static ssize_t store_map(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t cnt)
+{
+ if (cnt != sizeof(map_seg7))
+ return -EINVAL;
+ memcpy(&map_seg7, buf, sizeof(map_seg7));
+ return sizeof(map_seg7);
+}
+
+/* Interface to the LCD.
+ */
+
+/* Reading /sys/../lineX will return the format string with its settings:
+ *
+ * Example:
+ * cat ./line3
+ * 888888888888
+ * Linux Rocks!
+ */
+static ssize_t show_line(struct device *dev, char *buf, int a, int b)
+{
+ struct yealink_dev *yld;
+ int i;
+
+ down_read(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_read(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ for (i = a; i < b; i++)
+ *buf++ = lcdMap[i].type;
+ *buf++ = '\n';
+ for (i = a; i < b; i++)
+ *buf++ = yld->lcdMap[i];
+ *buf++ = '\n';
+ *buf = 0;
+
+ up_read(&sysfs_rwsema);
+ return 3 + ((b - a) << 1);
+}
+
+static ssize_t show_line1(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET);
+}
+
+static ssize_t show_line2(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET);
+}
+
+static ssize_t show_line3(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET);
+}
+
+/* Writing to /sys/../lineX will set the coresponding LCD line.
+ * - Excess characters are ignored.
+ * - If less characters are written than allowed, the remaining digits are
+ * unchanged.
+ * - The '\n' or '\t' char is a placeholder, it does not overwrite the
+ * original content.
+ */
+static ssize_t store_line(struct device *dev, const char *buf, size_t count,
+ int el, size_t len)
+{
+ struct yealink_dev *yld;
+ int i;
+
+ down_write(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_write(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ if (len > count)
+ len = count;
+ for (i = 0; i < len; i++)
+ setChar(yld, el++, buf[i]);
+
+ up_write(&sysfs_rwsema);
+ return count;
+}
+
+static ssize_t store_line1(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE);
+}
+
+static ssize_t store_line2(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE);
+}
+
+static ssize_t store_line3(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE);
+}
+
+/* Interface to visible and audible "icons", these include:
+ * pictures on the LCD, the LED, and the dialtone signal.
+ */
+
+/* Get a list of "switchable elements" with their current state. */
+static ssize_t get_icons(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct yealink_dev *yld;
+ int i, ret = 1;
+
+ down_read(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_read(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
+ if (lcdMap[i].type != '.')
+ continue;
+ ret += sprintf(&buf[ret], "%s %s\n",
+ yld->lcdMap[i] == ' ' ? " " : "on",
+ lcdMap[i].u.p.name);
+ }
+ up_read(&sysfs_rwsema);
+ return ret;
+}
+
+/* Change the visibility of a particular element. */
+static ssize_t set_icon(struct device *dev, const char *buf, size_t count,
+ int chr)
+{
+ struct yealink_dev *yld;
+ int i;
+
+ down_write(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_write(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++) {
+ if (lcdMap[i].type != '.')
+ continue;
+ if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) {
+ setChar(yld, i, chr);
+ break;
+ }
+ }
+
+ up_write(&sysfs_rwsema);
+ return count;
+}
+
+static ssize_t show_icon(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return set_icon(dev, buf, count, buf[0]);
+}
+
+static ssize_t hide_icon(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return set_icon(dev, buf, count, ' ');
+}
+
+/* Upload a ringtone to the device.
+ */
+
+/* Stores raw ringtone data in the phone */
+static ssize_t store_ringtone(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct yealink_dev *yld;
+
+ down_write(&sysfs_rwsema);
+ yld = dev_get_drvdata(dev);
+ if (yld == NULL) {
+ up_write(&sysfs_rwsema);
+ return -ENODEV;
+ }
+
+ /* TODO locking with async usb control interface??? */
+ yealink_set_ringtone(yld, (char *)buf, count);
+ up_write(&sysfs_rwsema);
+ return count;
+}
+
+#define _M444 S_IRUGO
+#define _M664 S_IRUGO|S_IWUSR|S_IWGRP
+#define _M220 S_IWUSR|S_IWGRP
+
+static DEVICE_ATTR(map_seg7 , _M664, show_map , store_map );
+static DEVICE_ATTR(line1 , _M664, show_line1 , store_line1 );
+static DEVICE_ATTR(line2 , _M664, show_line2 , store_line2 );
+static DEVICE_ATTR(line3 , _M664, show_line3 , store_line3 );
+static DEVICE_ATTR(get_icons , _M444, get_icons , NULL );
+static DEVICE_ATTR(show_icon , _M220, NULL , show_icon );
+static DEVICE_ATTR(hide_icon , _M220, NULL , hide_icon );
+static DEVICE_ATTR(ringtone , _M220, NULL , store_ringtone);
+
+static struct attribute *yld_attributes[] = {
+ &dev_attr_line1.attr,
+ &dev_attr_line2.attr,
+ &dev_attr_line3.attr,
+ &dev_attr_get_icons.attr,
+ &dev_attr_show_icon.attr,
+ &dev_attr_hide_icon.attr,
+ &dev_attr_map_seg7.attr,
+ &dev_attr_ringtone.attr,
+ NULL
+};
+
+static struct attribute_group yld_attr_group = {
+ .attrs = yld_attributes
+};
+
+/*******************************************************************************
+ * Linux interface and usb initialisation
+ ******************************************************************************/
+
+static const struct yld_device {
+ u16 idVendor;
+ u16 idProduct;
+ char *name;
+} yld_device[] = {
+ { 0x6993, 0xb001, "Yealink usb-p1k" },
+};
+
+static struct usb_device_id usb_table [] = {
+ { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
+ { }
+};
+
+static int usb_cleanup(struct yealink_dev *yld, int err)
+{
+ if (yld == NULL)
+ return err;
+
+ if (yld->urb_irq) {
+ usb_kill_urb(yld->urb_irq);
+ usb_free_urb(yld->urb_irq);
+ }
+ if (yld->urb_ctl)
+ usb_free_urb(yld->urb_ctl);
+ if (yld->idev.dev)
+ input_unregister_device(&yld->idev);
+ if (yld->ctl_req)
+ usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
+ yld->ctl_req, yld->ctl_req_dma);
+ if (yld->ctl_data)
+ usb_buffer_free(yld->udev, USB_PKT_LEN,
+ yld->ctl_data, yld->ctl_dma);
+ if (yld->irq_data)
+ usb_buffer_free(yld->udev, USB_PKT_LEN,
+ yld->irq_data, yld->irq_dma);
+ kfree(yld);
+ return err;
+}
+
+static void usb_disconnect(struct usb_interface *intf)
+{
+ struct yealink_dev *yld;
+
+ down_write(&sysfs_rwsema);
+ yld = usb_get_intfdata(intf);
+ sysfs_remove_group(&intf->dev.kobj, &yld_attr_group);
+ usb_set_intfdata(intf, NULL);
+ up_write(&sysfs_rwsema);
+
+ usb_cleanup(yld, 0);
+}
+
+static int usb_match(struct usb_device *udev)
+{
+ int i;
+ u16 idVendor = le16_to_cpu(udev->descriptor.idVendor);
+ u16 idProduct = le16_to_cpu(udev->descriptor.idProduct);
+
+ for (i = 0; i < ARRAY_SIZE(yld_device); i++) {
+ if ((idVendor == yld_device[i].idVendor) &&
+ (idProduct == yld_device[i].idProduct))
+ return i;
+ }
+ return -ENODEV;
+}
+
+static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev (intf);
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct yealink_dev *yld;
+ char path[64];
+ int ret, pipe, i;
+
+ i = usb_match(udev);
+ if (i < 0)
+ return -ENODEV;
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+ if (!(endpoint->bEndpointAddress & 0x80))
+ return -EIO;
+ if ((endpoint->bmAttributes & 3) != 3)
+ return -EIO;
+
+ if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ memset(yld, 0, sizeof(*yld));
+ yld->udev = udev;
+
+ /* allocate usb buffers */
+ yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+ SLAB_ATOMIC, &yld->irq_dma);
+ if (yld->irq_data == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
+ SLAB_ATOMIC, &yld->ctl_dma);
+ if (!yld->ctl_data)
+ return usb_cleanup(yld, -ENOMEM);
+
+ yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
+ SLAB_ATOMIC, &yld->ctl_req_dma);
+ if (yld->ctl_req == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ /* allocate urb structures */
+ yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (yld->urb_irq == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
+ if (yld->urb_ctl == NULL)
+ return usb_cleanup(yld, -ENOMEM);
+
+ /* get a handle to the interrupt data pipe */
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ if (ret != USB_PKT_LEN)
+ err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+
+ /* initialise irq urb */
+ usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
+ USB_PKT_LEN,
+ urb_irq_callback,
+ yld, endpoint->bInterval);
+ yld->urb_irq->transfer_dma = yld->irq_dma;
+ yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ yld->urb_irq->dev = udev;
+
+ /* initialise ctl urb */
+ yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_OUT;
+ yld->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
+ yld->ctl_req->wValue = cpu_to_le16(0x200);
+ yld->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
+ yld->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
+
+ usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
+ (void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN,
+ urb_ctl_callback, yld);
+ yld->urb_ctl->setup_dma = yld->ctl_req_dma;
+ yld->urb_ctl->transfer_dma = yld->ctl_dma;
+ yld->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP |
+ URB_NO_TRANSFER_DMA_MAP;
+ yld->urb_ctl->dev = udev;
+
+ /* find out the physical bus location */
+ if (usb_make_path(udev, path, sizeof(path)) > 0)
+ snprintf(yld->phys, sizeof(yld->phys)-1, "%s/input0", path);
+
+ /* register settings for the input device */
+ init_input_dev(&yld->idev);
+ yld->idev.private = yld;
+ yld->idev.id.bustype = BUS_USB;
+ yld->idev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
+ yld->idev.id.product = le16_to_cpu(udev->descriptor.idProduct);
+ yld->idev.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+ yld->idev.dev = &intf->dev;
+ yld->idev.name = yld_device[i].name;
+ yld->idev.phys = yld->phys;
+ /* yld->idev.event = input_ev; TODO */
+ yld->idev.open = input_open;
+ yld->idev.close = input_close;
+
+ /* register available key events */
+ yld->idev.evbit[0] = BIT(EV_KEY);
+ for (i = 0; i < 256; i++) {
+ int k = map_p1k_to_key(i);
+ if (k >= 0) {
+ set_bit(k & 0xff, yld->idev.keybit);
+ if (k >> 8)
+ set_bit(k >> 8, yld->idev.keybit);
+ }
+ }
+
+ printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path);
+
+ input_register_device(&yld->idev);
+
+ usb_set_intfdata(intf, yld);
+
+ /* clear visible elements */
+ for (i=0; i<ARRAY_SIZE(lcdMap); i++)
+ setChar(yld, i, ' ');
+
+ /* display driver version on LCD line 3 */
+ store_line3(&intf->dev, NULL,
+ DRIVER_VERSION, sizeof(DRIVER_VERSION));
+
+ /* Register sysfs hooks (don't care about failure) */
+ sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
+ return 0;
+}
+
+static struct usb_driver yealink_driver = {
+ .owner = THIS_MODULE,
+ .name = "yealink",
+ .probe = usb_probe,
+ .disconnect = usb_disconnect,
+ .id_table = usb_table,
+};
+
+static int __init yealink_dev_init(void)
+{
+ int ret = usb_register(&yealink_driver);
+ if (ret == 0)
+ info(DRIVER_DESC ":" DRIVER_VERSION);
+ return ret;
+}
+
+static void __exit yealink_dev_exit(void)
+{
+ usb_deregister(&yealink_driver);
+}
+
+module_init(yealink_dev_init);
+module_exit(yealink_dev_exit);
+
+MODULE_DEVICE_TABLE (usb, usb_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/yealink.h b/drivers/usb/input/yealink.h
new file mode 100644
index 00000000000..48af0be9cbd
--- /dev/null
+++ b/drivers/usb/input/yealink.h
@@ -0,0 +1,220 @@
+/*
+ * drivers/usb/input/yealink.h
+ *
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef INPUT_YEALINK_H
+#define INPUT_YEALINK_H
+
+/* Using the control channel on interface 3 various aspects of the phone
+ * can be controlled like LCD, LED, dialtone and the ringtone.
+ */
+
+struct yld_ctl_packet {
+ u8 cmd; /* command code, see below */
+ u8 size; /* 1-11, size of used data bytes. */
+ u16 offset; /* internal packet offset */
+ u8 data[11];
+ s8 sum; /* negative sum of 15 preceding bytes */
+} __attribute__ ((packed));
+
+#define USB_PKT_LEN sizeof(struct yld_ctl_packet)
+
+/* The following yld_ctl_packet's are available: */
+
+/* Init registers
+ *
+ * cmd 0x8e
+ * size 10
+ * offset 0
+ * data 0,0,0,0....
+ */
+#define CMD_INIT 0x8e
+
+/* Request key scan
+ *
+ * cmd 0x80
+ * size 1
+ * offset 0
+ * data[0] on return returns the key number, if it changes there's a new
+ * key pressed.
+ */
+#define CMD_KEYPRESS 0x80
+
+/* Request scancode
+ *
+ * cmd 0x81
+ * size 1
+ * offset key number [0-1f]
+ * data[0] on return returns the scancode
+ */
+#define CMD_SCANCODE 0x81
+
+/* Set LCD
+ *
+ * cmd 0x04
+ * size 1-11
+ * offset 0-23
+ * data segment bits
+ */
+#define CMD_LCD 0x04
+
+/* Set led
+ *
+ * cmd 0x05
+ * size 1
+ * offset 0
+ * data[0] 0 OFF / 1 ON
+ */
+#define CMD_LED 0x05
+
+/* Set ringtone volume
+ *
+ * cmd 0x11
+ * size 1
+ * offset 0
+ * data[0] 0-0xff volume
+ */
+#define CMD_RING_VOLUME 0x11
+
+/* Set ringtone notes
+ *
+ * cmd 0x02
+ * size 1-11
+ * offset 0->
+ * data binary representation LE16(-freq), LE16(duration) ....
+ */
+#define CMD_RING_NOTE 0x02
+
+/* Sound ringtone via the speaker on the back
+ *
+ * cmd 0x03
+ * size 1
+ * offset 0
+ * data[0] 0 OFF / 0x24 ON
+ */
+#define CMD_RINGTONE 0x03
+
+/* Sound dial tone via the ear speaker
+ *
+ * cmd 0x09
+ * size 1
+ * offset 0
+ * data[0] 0 OFF / 1 ON
+ */
+#define CMD_DIALTONE 0x09
+
+#endif /* INPUT_YEALINK_H */
+
+
+#if defined(_SEG) && defined(_PIC)
+/* This table maps the LCD segments onto individual bit positions in the
+ * yld_status struct.
+ */
+
+/* LCD, each segment must be driven seperately.
+ *
+ * Layout:
+ *
+ * |[] [][] [][] [][] in |[][]
+ * |[] M [][] D [][] : [][] out |[][]
+ * store
+ *
+ * NEW REP SU MO TU WE TH FR SA
+ *
+ * [] [] [] [] [] [] [] [] [] [] [] []
+ * [] [] [] [] [] [] [] [] [] [] [] []
+ */
+
+/* Line 1
+ * Format : 18.e8.M8.88...188
+ * Icon names : M D : IN OUT STORE
+ */
+#define LCD_LINE1_OFFSET 0
+#define LCD_LINE1_SIZE 17
+
+/* Note: first g then f => ! ! */
+/* _SEG( type a b c d e g f ) */
+ _SEG('1', 0,0 , 22,2 , 22,2 , 0,0 , 0,0 , 0,0 , 0,0 ),
+ _SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1 ),
+ _PIC('.', 22,1 , "M" ),
+ _SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1 ),
+ _SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1 ),
+ _PIC('.', 15,8 , "D" ),
+ _SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1 ),
+ _SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1 ),
+ _PIC('.', 11,8 , ":" ),
+ _SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1 ),
+ _SEG('8', 8,1 , 8,2 , 8,4 , 8,8 , 9,4 , 9,2 , 9,1 ),
+ _PIC('.', 7,1 , "IN" ),
+ _PIC('.', 7,2 , "OUT" ),
+ _PIC('.', 7,4 , "STORE" ),
+ _SEG('1', 0,0 , 5,1 , 5,1 , 0,0 , 0,0 , 0,0 , 0,0 ),
+ _SEG('8', 4,1 , 4,2 , 4,4 , 4,8 , 5,8 , 5,4 , 5,2 ),
+ _SEG('8', 2,1 , 2,2 , 2,4 , 2,8 , 3,4 , 3,2 , 3,1 ),
+
+/* Line 2
+ * Format : .........
+ * Pict. name : NEW REP SU MO TU WE TH FR SA
+ */
+#define LCD_LINE2_OFFSET LCD_LINE1_OFFSET + LCD_LINE1_SIZE
+#define LCD_LINE2_SIZE 9
+
+ _PIC('.', 23,2 , "NEW" ),
+ _PIC('.', 23,4 , "REP" ),
+ _PIC('.', 1,8 , "SU" ),
+ _PIC('.', 1,4 , "MO" ),
+ _PIC('.', 1,2 , "TU" ),
+ _PIC('.', 1,1 , "WE" ),
+ _PIC('.', 0,1 , "TH" ),
+ _PIC('.', 0,2 , "FR" ),
+ _PIC('.', 0,4 , "SA" ),
+
+/* Line 3
+ * Format : 888888888888
+ */
+#define LCD_LINE3_OFFSET LCD_LINE2_OFFSET + LCD_LINE2_SIZE
+#define LCD_LINE3_SIZE 12
+
+ _SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32 ),
+ _SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32 ),
+ _SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32 ),
+ _SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32 ),
+ _SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32 ),
+ _SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32 ),
+ _SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32 ),
+ _SEG('8', 8,16, 8,32, 8,64, 8,128, 9,128, 9,64, 9,32 ),
+ _SEG('8', 6,16, 6,32, 6,64, 6,128, 7,128, 7,64, 7,32 ),
+ _SEG('8', 4,16, 4,32, 4,64, 4,128, 5,128, 5,64, 5,32 ),
+ _SEG('8', 2,16, 2,32, 2,64, 2,128, 3,128, 3,64, 3,32 ),
+ _SEG('8', 0,16, 0,32, 0,64, 0,128, 1,128, 1,64, 1,32 ),
+
+/* Line 4
+ *
+ * The LED, DIALTONE and RINGTONE are implemented as icons and use the same
+ * sysfs interface.
+ */
+#define LCD_LINE4_OFFSET LCD_LINE3_OFFSET + LCD_LINE3_SIZE
+
+ _PIC('.', offsetof(struct yld_status, led) , 0x01, "LED" ),
+ _PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ),
+ _PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ),
+
+#undef _SEG
+#undef _PIC
+#endif /* _SEG && _PIC */
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 6f7994f5a71..ae4681f9f0e 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -426,7 +426,7 @@ static int auerchain_submit_urb (pauerchain_t acp, struct urb * urb)
/* cancel an urb which is submitted to the chain
the result is 0 if the urb is cancelled, or -EINPROGRESS if
- URB_ASYNC_UNLINK is set and the function is successfully started.
+ the function is successfully started.
*/
static int auerchain_unlink_urb (pauerchain_t acp, struct urb * urb)
{
@@ -515,7 +515,6 @@ static void auerchain_unlink_all (pauerchain_t acp)
acep = acp->active;
if (acep) {
urbp = acep->urbp;
- urbp->transfer_flags &= ~URB_ASYNC_UNLINK;
dbg ("unlink active urb");
usb_kill_urb (urbp);
}
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index ad17892aac9..7e93ac96490 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -464,7 +464,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_tail*(sizeof(size_t)+dev->interrupt_in_endpoint_size));
bytes_to_read = min(count, *actual_buffer);
if (bytes_to_read < *actual_buffer)
- dev_warn(&dev->intf->dev, "Read buffer overflow, %d bytes dropped\n",
+ dev_warn(&dev->intf->dev, "Read buffer overflow, %zd bytes dropped\n",
*actual_buffer-bytes_to_read);
/* copy one interrupt_in_buffer from ring_buffer into userspace */
@@ -528,8 +528,8 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
/* write the data into interrupt_out_buffer from userspace */
bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
if (bytes_to_write < count)
- dev_warn(&dev->intf->dev, "Write buffer overflow, %d bytes dropped\n",count-bytes_to_write);
- dbg_info(&dev->intf->dev, "%s: count = %d, bytes_to_write = %d\n", __FUNCTION__, count, bytes_to_write);
+ dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write);
+ dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __FUNCTION__, count, bytes_to_write);
if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
retval = -EFAULT;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 2fd12264fd5..d63ce6c030f 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -229,7 +229,7 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe,
usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
sisusb_bulk_completeout, &sisusb->urbout_context[index]);
- urb->transfer_flags |= (tflags | URB_ASYNC_UNLINK);
+ urb->transfer_flags |= tflags;
urb->actual_length = 0;
if ((urb->transfer_dma = transfer_dma))
@@ -295,7 +295,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
sisusb_bulk_completein, sisusb);
- urb->transfer_flags |= (tflags | URB_ASYNC_UNLINK);
+ urb->transfer_flags |= tflags;
urb->actual_length = 0;
if ((urb->transfer_dma = transfer_dma))
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index fd7fb98e4b2..54799eb0bc6 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -986,7 +986,6 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
u->context = &context;
u->complete = ctrl_complete;
- u->transfer_flags |= URB_ASYNC_UNLINK;
}
/* queue the urbs */
@@ -1052,7 +1051,6 @@ static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
urb = simple_alloc_urb (testdev_to_usbdev (dev), pipe, size);
if (!urb)
return -ENOMEM;
- urb->transfer_flags |= URB_ASYNC_UNLINK;
urb->context = &completion;
urb->complete = unlink1_callback;
diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile
index b0015b8a1d1..3cf3ea3a88e 100644
--- a/drivers/usb/mon/Makefile
+++ b/drivers/usb/mon/Makefile
@@ -2,7 +2,7 @@
# Makefile for USB Core files and filesystem
#
-usbmon-objs := mon_main.o mon_stat.o mon_text.o
+usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_dma.o
# This does not use CONFIG_USB_MON because we want this to use a tristate.
obj-$(CONFIG_USB) += usbmon.o
diff --git a/drivers/usb/mon/mon_dma.c b/drivers/usb/mon/mon_dma.c
new file mode 100644
index 00000000000..0a1367b760a
--- /dev/null
+++ b/drivers/usb/mon/mon_dma.c
@@ -0,0 +1,55 @@
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * mon_dma.c: Library which snoops on DMA areas.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/highmem.h>
+#include <asm/page.h>
+
+#include <linux/usb.h> /* Only needed for declarations in usb_mon.h */
+#include "usb_mon.h"
+
+#ifdef __i386__ /* CONFIG_ARCH_I386 does not exit */
+#define MON_HAS_UNMAP 1
+
+#define phys_to_page(phys) pfn_to_page((phys) >> PAGE_SHIFT)
+
+char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len)
+{
+ struct page *pg;
+ unsigned long flags;
+ unsigned char *map;
+ unsigned char *ptr;
+
+ /*
+ * On i386, a DMA handle is the "physical" address of a page.
+ * In other words, the bus address is equal to physical address.
+ * There is no IOMMU.
+ */
+ pg = phys_to_page(dma_addr);
+
+ /*
+ * We are called from hardware IRQs in case of callbacks.
+ * But we can be called from softirq or process context in case
+ * of submissions. In such case, we need to protect KM_IRQ0.
+ */
+ local_irq_save(flags);
+ map = kmap_atomic(pg, KM_IRQ0);
+ ptr = map + (dma_addr & (PAGE_SIZE-1));
+ memcpy(dst, ptr, len);
+ kunmap_atomic(map, KM_IRQ0);
+ local_irq_restore(flags);
+ return 0;
+}
+#endif /* __i386__ */
+
+#ifndef MON_HAS_UNMAP
+char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len)
+{
+ return 'D';
+}
+#endif
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 26266b30028..417464dea9f 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -91,25 +91,11 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
int len, char ev_type)
{
int pipe = urb->pipe;
- unsigned char *data;
-
- /*
- * The check to see if it's safe to poke at data has an enormous
- * number of corner cases, but it seems that the following is
- * more or less safe.
- *
- * We do not even try to look transfer_buffer, because it can
- * contain non-NULL garbage in case the upper level promised to
- * set DMA for the HCD.
- */
- if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
- return 'D';
if (len <= 0)
return 'L';
-
- if ((data = urb->transfer_buffer) == NULL)
- return 'Z'; /* '0' would be not as pretty. */
+ if (len >= DATA_MAX)
+ len = DATA_MAX;
/*
* Bulk is easy to shortcut reliably.
@@ -126,8 +112,21 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
}
}
- if (len >= DATA_MAX)
- len = DATA_MAX;
+ /*
+ * The check to see if it's safe to poke at data has an enormous
+ * number of corner cases, but it seems that the following is
+ * more or less safe.
+ *
+ * We do not even try to look transfer_buffer, because it can
+ * contain non-NULL garbage in case the upper level promised to
+ * set DMA for the HCD.
+ */
+ if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+ return mon_dmapeek(ep->data, urb->transfer_dma, len);
+
+ if (urb->transfer_buffer == NULL)
+ return 'Z'; /* '0' would be not as pretty. */
+
memcpy(ep->data, urb->transfer_buffer, len);
return 0;
}
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index 9b06784d2c4..4be0f934607 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -45,6 +45,10 @@ struct mon_reader {
void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r);
void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r);
+/*
+ */
+extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len);
+
extern struct semaphore mon_lock;
extern struct file_operations mon_fops_text;
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index b104430e2c6..8c010bb44eb 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -99,7 +99,7 @@ config USB_USBNET
with "minidrivers" built around a common network driver core
that supports deep queues for efficient transfers. (This gives
better performance with small packets and at high speeds).
-
+
The USB host runs "usbnet", and the other end of the link might be:
- Another USB host, when using USB "network" or "data transfer"
@@ -125,38 +125,63 @@ config USB_USBNET
To compile this driver as a module, choose M here: the
module will be called usbnet.
-comment "USB Host-to-Host Cables"
- depends on USB_USBNET
-
-config USB_ALI_M5632
- boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
- depends on USB_USBNET
+config USB_NET_AX8817X
+ tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
+ depends on USB_USBNET && NET_ETHERNET
+ select CRC32
+ select MII
default y
help
- Choose this option if you're using a host-to-host cable
- based on this design, which supports USB 2.0 high speed.
+ This option adds support for ASIX AX88xxx based USB 2.0
+ 10/100 Ethernet adapters.
-config USB_AN2720
- boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
- depends on USB_USBNET
- default y
- help
- Choose this option if you're using a host-to-host cable
- based on this design. Note that AnchorChips is now a
- Cypress brand.
+ This driver should work with at least the following devices:
+ * Aten UC210T
+ * ASIX AX88172
+ * Billionton Systems, USB2AR
+ * Buffalo LUA-U2-KTX
+ * Corega FEther USB2-TX
+ * D-Link DUB-E100
+ * Hawking UF200
+ * Linksys USB200M
+ * Netgear FA120
+ * Sitecom LN-029
+ * Intellinet USB 2.0 Ethernet
+ * ST Lab USB 2.0 Ethernet
+ * TrendNet TU2-ET100
-config USB_BELKIN
- boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use.
+
+
+config USB_NET_CDCETHER
+ tristate "CDC Ethernet support (smart devices such as cable modems)"
depends on USB_USBNET
default y
help
- Choose this option if you're using a host-to-host cable
- based on this design: two NetChip 2890 chips and an Atmel
- microcontroller, with LEDs that indicate traffic.
+ This option supports devices conforming to the Communication Device
+ Class (CDC) Ethernet Control Model, a specification that's easy to
+ implement in device firmware. The CDC specifications are available
+ from <http://www.usb.org/>.
-config USB_GENESYS
- boolean "GeneSys GL620USB-A based cables"
- default y
+ CDC Ethernet is an implementation option for DOCSIS cable modems
+ that support USB connectivity, used for non-Microsoft USB hosts.
+ The Linux-USB CDC Ethernet Gadget driver is an open implementation.
+ This driver should work with at least the following devices:
+
+ * Ericsson PipeRider (all variants)
+ * Motorola (DM100 and SB4100)
+ * Broadcom Cable Modem (reference design)
+ * Toshiba PCX1100U
+ * ...
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use. However, if the
+ IEEE 802 "local assignment" bit is set in the address, a "usbX"
+ name is used instead.
+
+config USB_NET_GL620A
+ tristate "GeneSys GL620USB-A based cables"
depends on USB_USBNET
help
Choose this option if you're using a host-to-host cable,
@@ -164,38 +189,78 @@ config USB_GENESYS
Note that the half-duplex "GL620USB" is not supported.
-config USB_NET1080
- boolean "NetChip 1080 based cables (Laplink, ...)"
+config USB_NET_NET1080
+ tristate "NetChip 1080 based cables (Laplink, ...)"
default y
depends on USB_USBNET
help
Choose this option if you're using a host-to-host cable based
- on this design: one NetChip 1080 chips and supporting logic,
- supporting LEDs that indicate traffic
+ on this design: one NetChip 1080 chip and supporting logic,
+ optionally with LEDs that indicate traffic
-config USB_PL2301
- boolean "Prolific PL-2301/2302 based cables"
- default y
- # handshake/init/reset problems, from original 'plusb' driver
+config USB_NET_PLUSB
+ tristate "Prolific PL-2301/2302 based cables"
+ # if the handshake/init/reset problems, from original 'plusb',
+ # are ever resolved ... then remove "experimental"
depends on USB_USBNET && EXPERIMENTAL
help
Choose this option if you're using a host-to-host cable
with one of these chips.
-config USB_KC2190
- boolean "KT Technology KC2190 based cables (InstaNet)"
- default y
+config USB_NET_RNDIS_HOST
+ tristate "Host for RNDIS devices (EXPERIMENTAL)"
depends on USB_USBNET && EXPERIMENTAL
+ select USB_NET_CDCETHER
help
- Choose this option if you're using a host-to-host cable
- with one of these chips.
+ This option enables hosting "Remote NDIS" USB networking links,
+ as encouraged by Microsoft (instead of CDC Ethernet!) for use in
+ various devices that may only support this protocol.
-comment "Intelligent USB Devices/Gadgets"
+ Avoid using this protocol unless you have no better options.
+ The protocol specification is incomplete, and is controlled by
+ (and for) Microsoft; it isn't an "Open" ecosystem or market.
+
+config USB_NET_CDC_SUBSET
+ tristate "Simple USB Network Links (CDC Ethernet subset)"
depends on USB_USBNET
+ help
+ This driver module supports USB network devices that can work
+ without any device-specific information. Select it if you have
+ one of these drivers.
+
+ Note that while many USB host-to-host cables can work in this mode,
+ that may mean not being able to talk to Win32 systems or more
+ commonly not being able to handle certain events (like replugging
+ the host on the other end) very well. Also, these devices will
+ not generally have permanently assigned Ethernet addresses.
+
+config USB_ALI_M5632
+ boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+ depends on USB_NET_CDC_SUBSET
+ help
+ Choose this option if you're using a host-to-host cable
+ based on this design, which supports USB 2.0 high speed.
+
+config USB_AN2720
+ boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+ depends on USB_NET_CDC_SUBSET
+ help
+ Choose this option if you're using a host-to-host cable
+ based on this design. Note that AnchorChips is now a
+ Cypress brand.
+
+config USB_BELKIN
+ boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+ depends on USB_NET_CDC_SUBSET
+ default y
+ help
+ Choose this option if you're using a host-to-host cable
+ based on this design: two NetChip 2890 chips and an Atmel
+ microcontroller, with LEDs that indicate traffic.
config USB_ARMLINUX
boolean "Embedded ARM Linux links (iPaq, ...)"
- depends on USB_USBNET
+ depends on USB_NET_CDC_SUBSET
default y
help
Choose this option to support the "usb-eth" networking driver
@@ -212,15 +277,15 @@ config USB_ARMLINUX
config USB_EPSON2888
boolean "Epson 2888 based firmware (DEVELOPMENT)"
- depends on USB_USBNET
- default y
+ depends on USB_NET_CDC_SUBSET
help
Choose this option to support the usb networking links used
by some sample firmware from Epson.
-config USB_ZAURUS
- boolean "Sharp Zaurus (stock ROMs) and compatible"
+config USB_NET_ZAURUS
+ tristate "Sharp Zaurus (stock ROMs) and compatible"
depends on USB_USBNET
+ select USB_NET_CDCETHER
select CRC32
default y
help
@@ -235,61 +300,6 @@ config USB_ZAURUS
really need this non-conformant variant of CDC Ethernet (or in
some cases CDC MDLM) protocol, not "g_ether".
-config USB_CDCETHER
- boolean "CDC Ethernet support (smart devices such as cable modems)"
- depends on USB_USBNET
- default y
- help
- This option supports devices conforming to the Communication Device
- Class (CDC) Ethernet Control Model, a specification that's easy to
- implement in device firmware. The CDC specifications are available
- from <http://www.usb.org/>.
-
- CDC Ethernet is an implementation option for DOCSIS cable modems
- that support USB connectivity, used for non-Microsoft USB hosts.
- This driver should work with at least the following devices:
-
- * Ericsson PipeRider (all variants)
- * Motorola (DM100 and SB4100)
- * Broadcom Cable Modem (reference design)
- * Toshiba PCX1100U
- * ...
-
- This driver creates an interface named "ethX", where X depends on
- what other networking devices you have in use. However, if the
- IEEE 802 "local assignment" bit is set in the address, a "usbX"
- name is used instead.
-
-comment "USB Network Adapters"
- depends on USB_USBNET
-
-config USB_AX8817X
- boolean "ASIX AX88xxx Based USB 2.0 Ethernet Devices"
- depends on USB_USBNET && NET_ETHERNET
- select CRC32
- select MII
- default y
- help
- This option adds support for ASIX AX88xxx based USB 2.0
- 10/100 Ethernet devices.
-
- This driver should work with at least the following devices:
- * Aten UC210T
- * ASIX AX88172
- * Billionton Systems, USB2AR
- * Buffalo LUA-U2-KTX
- * Corega FEther USB2-TX
- * D-Link DUB-E100
- * Hawking UF200
- * Linksys USB200M
- * Netgear FA120
- * Sitecom LN-029
- * Intellinet USB 2.0 Ethernet
- * ST Lab USB 2.0 Ethernet
- * TrendNet TU2-ET100
-
- This driver creates an interface named "ethX", where X depends on
- what other networking devices you have in use.
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile
index fe3fd4115e1..222c0495f79 100644
--- a/drivers/usb/net/Makefile
+++ b/drivers/usb/net/Makefile
@@ -6,5 +6,13 @@ obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
+obj-$(CONFIG_USB_NET_AX8817X) += asix.o
+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
+obj-$(CONFIG_USB_NET_NET1080) += net1080.o
+obj-$(CONFIG_USB_NET_PLUSB) += plusb.o
+obj-$(CONFIG_USB_NET_RNDIS_HOST) += rndis_host.o
+obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
+obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
new file mode 100644
index 00000000000..861f00a4375
--- /dev/null
+++ b/drivers/usb/net/asix.c
@@ -0,0 +1,948 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+
+#include "usbnet.h"
+
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII 0x06
+#define AX_CMD_READ_MII_REG 0x07
+#define AX_CMD_WRITE_MII_REG 0x08
+#define AX_CMD_SET_HW_MII 0x0a
+#define AX_CMD_READ_EEPROM 0x0b
+#define AX_CMD_WRITE_EEPROM 0x0c
+#define AX_CMD_WRITE_ENABLE 0x0d
+#define AX_CMD_WRITE_DISABLE 0x0e
+#define AX_CMD_WRITE_RX_CTL 0x10
+#define AX_CMD_READ_IPG012 0x11
+#define AX_CMD_WRITE_IPG0 0x12
+#define AX_CMD_WRITE_IPG1 0x13
+#define AX_CMD_WRITE_IPG2 0x14
+#define AX_CMD_WRITE_MULTI_FILTER 0x16
+#define AX_CMD_READ_NODE_ID 0x17
+#define AX_CMD_READ_PHY_ID 0x19
+#define AX_CMD_READ_MEDIUM_STATUS 0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
+#define AX_CMD_READ_MONITOR_MODE 0x1c
+#define AX_CMD_WRITE_MONITOR_MODE 0x1d
+#define AX_CMD_WRITE_GPIOS 0x1f
+#define AX_CMD_SW_RESET 0x20
+#define AX_CMD_SW_PHY_STATUS 0x21
+#define AX_CMD_SW_PHY_SELECT 0x22
+#define AX88772_CMD_READ_NODE_ID 0x13
+
+#define AX_MONITOR_MODE 0x01
+#define AX_MONITOR_LINK 0x02
+#define AX_MONITOR_MAGIC 0x04
+#define AX_MONITOR_HSFS 0x10
+
+/* AX88172 Medium Status Register values */
+#define AX_MEDIUM_FULL_DUPLEX 0x02
+#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
+#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
+
+#define AX_MCAST_FILTER_SIZE 8
+#define AX_MAX_MCAST 64
+
+#define AX_EEPROM_LEN 0x40
+
+#define AX_SWRESET_CLEAR 0x00
+#define AX_SWRESET_RR 0x01
+#define AX_SWRESET_RT 0x02
+#define AX_SWRESET_PRTE 0x04
+#define AX_SWRESET_PRL 0x08
+#define AX_SWRESET_BZ 0x10
+#define AX_SWRESET_IPRL 0x20
+#define AX_SWRESET_IPPD 0x40
+
+#define AX88772_IPG0_DEFAULT 0x15
+#define AX88772_IPG1_DEFAULT 0x0c
+#define AX88772_IPG2_DEFAULT 0x12
+
+#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
+#define AX88772_MEDIUM_RESERVED 0x0004
+#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
+#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
+#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
+#define AX88772_MEDIUM_RX_ENABLE 0x0100
+#define AX88772_MEDIUM_100MB 0x0200
+#define AX88772_MEDIUM_DEFAULT \
+ (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
+ AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
+ AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
+
+#define AX_EEPROM_MAGIC 0xdeadbeef
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct ax8817x_data {
+ u8 multi_filter[AX_MCAST_FILTER_SIZE];
+};
+
+struct ax88172_int_data {
+ u16 res1;
+ u8 link;
+ u16 res2;
+ u8 status;
+ u16 res3;
+} __attribute__ ((packed));
+
+static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ return usb_control_msg(
+ dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ return usb_control_msg(
+ dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+
+ if (urb->status < 0)
+ printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
+ urb->status);
+
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static void ax8817x_status(struct usbnet *dev, struct urb *urb)
+{
+ struct ax88172_int_data *event;
+ int link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link) {
+ netif_carrier_on(dev->net);
+ usbnet_defer_kevent (dev, EVENT_LINK_RESET );
+ } else
+ netif_carrier_off(dev->net);
+ devdbg(dev, "ax8817x - Link Status is: %d", link);
+ }
+}
+
+static void
+ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ struct usb_ctrlrequest *req;
+ int status;
+ struct urb *urb;
+
+ if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
+ devdbg(dev, "Error allocating URB in write_cmd_async!");
+ return;
+ }
+
+ if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = cmd;
+ req->wValue = cpu_to_le16(value);
+ req->wIndex = cpu_to_le16(index);
+ req->wLength = cpu_to_le16(size);
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, size,
+ ax8817x_async_cmd_callback, req);
+
+ if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
+}
+
+static void ax8817x_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+ u8 rx_ctl = 0x8c;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x01;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > AX_MAX_MCAST) {
+ rx_ctl |= 0x02;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits =
+ ether_crc(ETH_ALEN,
+ mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= 0x10;
+ }
+
+ ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res;
+ u8 buf[1];
+
+ ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
+ ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+
+ return res & 0xffff;
+}
+
+/* same as above, but converts resulting value to cpu byte order */
+static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
+{
+ return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
+}
+
+static void
+ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res = val;
+ u8 buf[1];
+
+ ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+}
+
+/* same as above, but converts new value to le16 byte order before writing */
+static void
+ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 adv;
+ u16 res;
+ u8 mode;
+
+ mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
+ lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ res = mii_nway_result(lpa|adv);
+ if (res & LPA_DUPLEX)
+ mode |= AX_MEDIUM_FULL_DUPLEX;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
+static void
+ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & AX_MONITOR_MODE) {
+ if (opt & AX_MONITOR_LINK)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & AX_MONITOR_MAGIC)
+ wolinfo->wolopts |= WAKE_MAGIC;
+ }
+}
+
+static int
+ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+ u8 buf[1];
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= AX_MONITOR_LINK;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= AX_MONITOR_MAGIC;
+ if (opt != 0)
+ opt |= AX_MONITOR_MODE;
+
+ if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+ opt, 0, 0, &buf) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ax8817x_get_eeprom_len(struct net_device *net)
+{
+ return AX_EEPROM_LEN;
+}
+
+static int ax8817x_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *ebuf = (u16 *)data;
+ int i;
+
+ /* Crude hack to ensure that we don't overwrite memory
+ * if an odd length is supplied
+ */
+ if (eeprom->len % 2)
+ return -EINVAL;
+
+ eeprom->magic = AX_EEPROM_MAGIC;
+
+ /* ax8817x returns 2 bytes from eeprom on read */
+ for (i=0; i < eeprom->len / 2; i++) {
+ if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
+ eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void ax8817x_get_drvinfo (struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ info->eedump_len = 0x3e;
+}
+
+static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_ethtool_gset(&dev->mii,cmd);
+}
+
+static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_ethtool_sset(&dev->mii,cmd);
+}
+
+/* We need to override some ethtool_ops so we require our
+ own structure so we don't interfere with other usbnet
+ devices that may be connected at the same time. */
+static struct ethtool_ops ax8817x_ethtool_ops = {
+ .get_drvinfo = ax8817x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax8817x_get_wol,
+ .set_wol = ax8817x_set_wol,
+ .get_eeprom_len = ax8817x_get_eeprom_len,
+ .get_eeprom = ax8817x_get_eeprom,
+ .get_settings = ax8817x_get_settings,
+ .set_settings = ax8817x_set_settings,
+};
+
+static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret = 0;
+ void *buf;
+ int i;
+ unsigned long gpio_bits = dev->driver_info->data;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(ETH_ALEN, GFP_KERNEL);
+ if(!buf) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Toggle the GPIOs in a manufacturer/model specific way */
+ for (i = 2; i >= 0; i--) {
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ (gpio_bits >> (i * 8)) & 0xff, 0, 0,
+ buf)) < 0)
+ goto out2;
+ msleep(5);
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
+ 0x80, 0, 0, buf)) < 0) {
+ dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
+ goto out2;
+ }
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ 0, 0, 6, buf)) < 0) {
+ dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Get the PHY id */
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 0) {
+ dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
+ goto out2;
+ } else if (ret < 2) {
+ /* this should always return 2 bytes */
+ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
+ ret);
+ ret = -EIO;
+ goto out2;
+ }
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax8817x_mdio_read;
+ dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.phy_id_mask = 0x3f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = *((u8 *)buf + 1);
+ dev->net->do_ioctl = ax8817x_ioctl;
+
+ dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->ethtool_ops = &ax8817x_ethtool_ops;
+
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ mii_nway_restart(&dev->mii);
+
+ return 0;
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static struct ethtool_ops ax88772_ethtool_ops = {
+ .get_drvinfo = ax8817x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax8817x_get_wol,
+ .set_wol = ax8817x_set_wol,
+ .get_eeprom_len = ax8817x_get_eeprom_len,
+ .get_eeprom = ax8817x_get_eeprom,
+ .get_settings = ax8817x_get_settings,
+ .set_settings = ax8817x_set_settings,
+};
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+ void *buf;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(6, GFP_KERNEL);
+ if(!buf) {
+ dbg ("Cannot allocate memory for buffer");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ 0x00B0, 0, 0, buf)) < 0)
+ goto out2;
+
+ msleep(5);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+ 0x0001, 0, 0, buf)) < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to power down internal PHY: %d", ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to perform software reset: %d", ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
+ AX_SWRESET_IPRL | AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to set Internal/External PHY reset control: %d",
+ ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
+ 0x0000, 0, 0, buf)) < 0) {
+ dbg("Failed to reset RX_CTL: %d", ret);
+ goto out2;
+ }
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+ 0, 0, ETH_ALEN, buf)) < 0) {
+ dbg("Failed to read MAC address: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
+ 0, 0, 0, buf)) < 0) {
+ dbg("Enabling software MII failed: %d", ret);
+ goto out2;
+ }
+
+ if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
+ 0x0010, 2, 2, buf)) < 0)
+ || (*((u16 *)buf) != 0x003b)) {
+ dbg("Read PHY register 2 must be 0x3b00: %d", ret);
+ goto out2;
+ }
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax8817x_mdio_read;
+ dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.phy_id_mask = 0xff;
+ dev->mii.reg_num_mask = 0xff;
+ dev->net->do_ioctl = ax8817x_ioctl;
+
+ /* Get the PHY id */
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 0) {
+ dbg("Error reading PHY ID: %02x", ret);
+ goto out2;
+ } else if (ret < 2) {
+ /* this should always return 2 bytes */
+ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
+ ret);
+ ret = -EIO;
+ goto out2;
+ }
+ dev->mii.phy_id = *((u8 *)buf + 1);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Set external PHY reset pin level: %d", ret);
+ goto out2;
+ }
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
+ AX_SWRESET_IPRL | AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Set Internal/External PHY reset control: %d", ret);
+ goto out2;
+ }
+ msleep(150);
+
+
+ dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->ethtool_ops = &ax88772_ethtool_ops;
+
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(&dev->mii);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+ AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
+ dbg("Write medium mode register: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
+ AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+ AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
+ dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
+ goto out2;
+ }
+ if ((ret =
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
+ dbg("Failed to set hardware MII: %02x", ret);
+ goto out2;
+ }
+
+ /* Set RX_CTL to default values with 2k buffer, and enable cactus */
+ if ((ret =
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
+ buf)) < 0) {
+ dbg("Reset RX_CTL failed: %d", ret);
+ goto out2;
+ }
+
+ kfree(buf);
+
+ /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+ if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+ /* hard_mtu is still the default - the device does not support
+ jumbo eth frames */
+ dev->rx_urb_size = 2048;
+ }
+
+ return 0;
+
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 *head;
+ u32 header;
+ char *packet;
+ struct sk_buff *ax_skb;
+ u16 size;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+
+ skb_pull(skb, 4);
+
+ while (skb->len > 0) {
+ if ((short)(header & 0x0000ffff) !=
+ ~((short)((header & 0xffff0000) >> 16))) {
+ devdbg(dev,"header length data is error");
+ }
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+ if ((skb->len) - ((size + 1) & 0xfffe) == 0)
+ return 2;
+ if (size > ETH_FRAME_LEN) {
+ devdbg(dev,"invalid rx length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ ax_skb->tail = packet + size;
+ usbnet_skb_return(dev, ax_skb);
+ } else {
+ return 0;
+ }
+
+ skb_pull(skb, (size + 1) & 0xfffe);
+
+ if (skb->len == 0)
+ break;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+ skb_pull(skb, 4);
+ }
+
+ if (skb->len < 0) {
+ devdbg(dev,"invalid rx length %d", skb->len);
+ return 0;
+ }
+ return 1;
+}
+
+static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ unsigned flags)
+{
+ int padlen;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 packet_len;
+ u32 padbytes = 0xffff0000;
+
+ padlen = ((skb->len + 4) % 512) ? 0 : 4;
+
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data, skb->len);
+ skb->tail = skb->data + skb->len;
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ memcpy(skb->data, &packet_len, sizeof(packet_len));
+
+ if ((skb->len % 512) == 0) {
+ memcpy( skb->tail, &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+ return skb;
+}
+
+static int ax88772_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 adv;
+ u16 res;
+ u16 mode;
+
+ mode = AX88772_MEDIUM_DEFAULT;
+ lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ res = mii_nway_result(lpa|adv);
+
+ if ((res & LPA_DUPLEX) == 0)
+ mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
+ if ((res & LPA_100) == 0)
+ mode &= ~AX88772_MEDIUM_100MB;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
+static const struct driver_info ax8817x_info = {
+ .description = "ASIX AX8817x USB 2.0 Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+ .description = "DLink DUB-E100 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+ .description = "Netgear FA-120 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+ .description = "Hawking UF200 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+ .description = "ASIX AX88772 USB 2.0 Ethernet",
+ .bind = ax88772_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88772_link_reset,
+ .reset = ax88772_link_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88772_rx_fixup,
+ .tx_fixup = ax88772_tx_fixup,
+ .data = 0x00130103,
+};
+
+static const struct usb_device_id products [] = {
+{
+ // Linksys USB200M
+ USB_DEVICE (0x077b, 0x2226),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Netgear FA120
+ USB_DEVICE (0x0846, 0x1040),
+ .driver_info = (unsigned long) &netgear_fa120_info,
+}, {
+ // DLink DUB-E100
+ USB_DEVICE (0x2001, 0x1a00),
+ .driver_info = (unsigned long) &dlink_dub_e100_info,
+}, {
+ // Intellinet, ST Lab USB Ethernet
+ USB_DEVICE (0x0b95, 0x1720),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Hawking UF200, TrendNet TU2-ET100
+ USB_DEVICE (0x07b8, 0x420a),
+ .driver_info = (unsigned long) &hawking_uf200_info,
+}, {
+ // Billionton Systems, USB2AR
+ USB_DEVICE (0x08dd, 0x90ff),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ATEN UC210T
+ USB_DEVICE (0x0557, 0x2009),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Buffalo LUA-U2-KTX
+ USB_DEVICE (0x0411, 0x003d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+ USB_DEVICE (0x6189, 0x182d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // corega FEther USB2-TX
+ USB_DEVICE (0x07aa, 0x0017),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Surecom EP-1427X-2
+ USB_DEVICE (0x1189, 0x0893),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // goodway corp usb gwusb2e
+ USB_DEVICE (0x1631, 0x6200),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ASIX AX88772 10/100
+ USB_DEVICE (0x0b95, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+ .owner = THIS_MODULE,
+ .name = "asix",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+};
+
+static int __init asix_init(void)
+{
+ return usb_register(&asix_driver);
+}
+module_init(asix_init);
+
+static void __exit asix_exit(void)
+{
+ usb_deregister(&asix_driver);
+}
+module_exit(asix_exit);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c
index c8be912f24e..37ef365a247 100644
--- a/drivers/usb/net/catc.c
+++ b/drivers/usb/net/catc.c
@@ -383,7 +383,6 @@ static void catc_tx_done(struct urb *urb, struct pt_regs *regs)
if (urb->status == -ECONNRESET) {
dbg("Tx Reset.");
- urb->transfer_flags &= ~URB_ASYNC_UNLINK;
urb->status = 0;
catc->netdev->trans_start = jiffies;
catc->stats.tx_errors++;
@@ -445,7 +444,6 @@ static void catc_tx_timeout(struct net_device *netdev)
struct catc *catc = netdev_priv(netdev);
warn("Transmit timed out.");
- catc->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(catc->tx_urb);
}
diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c
new file mode 100644
index 00000000000..652b04bbf6a
--- /dev/null
+++ b/drivers/usb/net/cdc_ether.c
@@ -0,0 +1,509 @@
+/*
+ * CDC Ethernet based networking peripherals
+ * Copyright (C) 2003-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb_cdc.h>
+
+#include "usbnet.h"
+
+
+/*
+ * probes control interface, claims data interface, collects the bulk
+ * endpoints, activates data interface (if needed), maybe sets MTU.
+ * all pure cdc, except for certain firmware workarounds, and knowing
+ * that rndis uses one different rule.
+ */
+int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
+ struct usb_interface_descriptor *d;
+ struct cdc_state *info = (void *) &dev->data;
+ int status;
+ int rndis;
+ struct usb_driver *driver = driver_of(intf);
+
+ if (sizeof dev->data < sizeof *info)
+ return -EDOM;
+
+ /* expect strict spec conformance for the descriptors, but
+ * cope with firmware which stores them in the wrong place
+ */
+ if (len == 0 && dev->udev->actconfig->extralen) {
+ /* Motorola SB4100 (and others: Brad Hards says it's
+ * from a Broadcom design) put CDC descriptors here
+ */
+ buf = dev->udev->actconfig->extra;
+ len = dev->udev->actconfig->extralen;
+ if (len)
+ dev_dbg(&intf->dev,
+ "CDC descriptors on config\n");
+ }
+
+ /* this assumes that if there's a non-RNDIS vendor variant
+ * of cdc-acm, it'll fail RNDIS requests cleanly.
+ */
+ rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
+
+ memset(info, 0, sizeof *info);
+ info->control = intf;
+ while (len > 3) {
+ if (buf [1] != USB_DT_CS_INTERFACE)
+ goto next_desc;
+
+ /* use bDescriptorSubType to identify the CDC descriptors.
+ * We expect devices with CDC header and union descriptors.
+ * For CDC Ethernet we need the ethernet descriptor.
+ * For RNDIS, ignore two (pointless) CDC modem descriptors
+ * in favor of a complicated OID-based RPC scheme doing what
+ * CDC Ethernet achieves with a simple descriptor.
+ */
+ switch (buf [2]) {
+ case USB_CDC_HEADER_TYPE:
+ if (info->header) {
+ dev_dbg(&intf->dev, "extra CDC header\n");
+ goto bad_desc;
+ }
+ info->header = (void *) buf;
+ if (info->header->bLength != sizeof *info->header) {
+ dev_dbg(&intf->dev, "CDC header len %u\n",
+ info->header->bLength);
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_UNION_TYPE:
+ if (info->u) {
+ dev_dbg(&intf->dev, "extra CDC union\n");
+ goto bad_desc;
+ }
+ info->u = (void *) buf;
+ if (info->u->bLength != sizeof *info->u) {
+ dev_dbg(&intf->dev, "CDC union len %u\n",
+ info->u->bLength);
+ goto bad_desc;
+ }
+
+ /* we need a master/control interface (what we're
+ * probed with) and a slave/data interface; union
+ * descriptors sort this all out.
+ */
+ info->control = usb_ifnum_to_if(dev->udev,
+ info->u->bMasterInterface0);
+ info->data = usb_ifnum_to_if(dev->udev,
+ info->u->bSlaveInterface0);
+ if (!info->control || !info->data) {
+ dev_dbg(&intf->dev,
+ "master #%u/%p slave #%u/%p\n",
+ info->u->bMasterInterface0,
+ info->control,
+ info->u->bSlaveInterface0,
+ info->data);
+ goto bad_desc;
+ }
+ if (info->control != intf) {
+ dev_dbg(&intf->dev, "bogus CDC Union\n");
+ /* Ambit USB Cable Modem (and maybe others)
+ * interchanges master and slave interface.
+ */
+ if (info->data == intf) {
+ info->data = info->control;
+ info->control = intf;
+ } else
+ goto bad_desc;
+ }
+
+ /* a data interface altsetting does the real i/o */
+ d = &info->data->cur_altsetting->desc;
+ if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "slave class %u\n",
+ d->bInterfaceClass);
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_ETHERNET_TYPE:
+ if (info->ether) {
+ dev_dbg(&intf->dev, "extra CDC ether\n");
+ goto bad_desc;
+ }
+ info->ether = (void *) buf;
+ if (info->ether->bLength != sizeof *info->ether) {
+ dev_dbg(&intf->dev, "CDC ether len %u\n",
+ info->ether->bLength);
+ goto bad_desc;
+ }
+ dev->hard_mtu = le16_to_cpu(
+ info->ether->wMaxSegmentSize);
+ /* because of Zaurus, we may be ignoring the host
+ * side link address we were given.
+ */
+ break;
+ }
+next_desc:
+ len -= buf [0]; /* bLength */
+ buf += buf [0];
+ }
+
+ if (!info->header || !info->u || (!rndis && !info->ether)) {
+ dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
+ info->header ? "" : "header ",
+ info->u ? "" : "union ",
+ info->ether ? "" : "ether ");
+ goto bad_desc;
+ }
+
+ /* claim data interface and set it up ... with side effects.
+ * network traffic can't flow until an altsetting is enabled.
+ */
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ return status;
+ status = usbnet_get_endpoints(dev, info->data);
+ if (status < 0) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return status;
+ }
+
+ /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
+ dev->status = NULL;
+ if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
+ struct usb_endpoint_descriptor *desc;
+
+ dev->status = &info->control->cur_altsetting->endpoint [0];
+ desc = &dev->status->desc;
+ if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
+ || !(desc->bEndpointAddress & USB_DIR_IN)
+ || (le16_to_cpu(desc->wMaxPacketSize)
+ < sizeof(struct usb_cdc_notification))
+ || !desc->bInterval) {
+ dev_dbg(&intf->dev, "bad notification endpoint\n");
+ dev->status = NULL;
+ }
+ }
+ if (rndis && !dev->status) {
+ dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return -ENODEV;
+ }
+ return 0;
+
+bad_desc:
+ dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_driver *driver = driver_of(intf);
+
+ /* disconnect master --> disconnect slave */
+ if (intf == info->control && info->data) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ info->data = NULL;
+ }
+
+ /* and vice versa (just in case) */
+ else if (intf == info->data && info->control) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->control, NULL);
+ usb_driver_release_interface(driver, info->control);
+ info->control = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces. The DATA interface is inactive till an altsetting
+ * is selected. Configuration data includes class descriptors. There's
+ * an optional status endpoint on the control interface.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with, with more functionality.
+ *
+ *-------------------------------------------------------------------------*/
+
+static void dumpspeed(struct usbnet *dev, __le32 *speeds)
+{
+ if (netif_msg_timer(dev))
+ devinfo(dev, "link speeds: %u kbps up, %u kbps down",
+ __le32_to_cpu(speeds[0]) / 1000,
+ __le32_to_cpu(speeds[1]) / 1000);
+}
+
+static void cdc_status(struct usbnet *dev, struct urb *urb)
+{
+ struct usb_cdc_notification *event;
+
+ if (urb->actual_length < sizeof *event)
+ return;
+
+ /* SPEED_CHANGE can get split into two 8-byte packets */
+ if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+ dumpspeed(dev, (__le32 *) urb->transfer_buffer);
+ return;
+ }
+
+ event = urb->transfer_buffer;
+ switch (event->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ if (netif_msg_timer(dev))
+ devdbg(dev, "CDC: carrier %s",
+ event->wValue ? "on" : "off");
+ if (event->wValue)
+ netif_carrier_on(dev->net);
+ else
+ netif_carrier_off(dev->net);
+ break;
+ case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
+ if (netif_msg_timer(dev))
+ devdbg(dev, "CDC: speed change (len %d)",
+ urb->actual_length);
+ if (urb->actual_length != (sizeof *event + 8))
+ set_bit(EVENT_STS_SPLIT, &dev->flags);
+ else
+ dumpspeed(dev, (__le32 *) &event[1]);
+ break;
+ /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
+ * but there are no standard formats for the response data.
+ */
+ default:
+ deverr(dev, "CDC: unexpected notification %02x!",
+ event->bNotificationType);
+ break;
+ }
+}
+
+static u8 nibble(unsigned char c)
+{
+ if (likely(isdigit(c)))
+ return c - '0';
+ c = toupper(c);
+ if (likely(isxdigit(c)))
+ return 10 + c - 'A';
+ return 0;
+}
+
+static inline int
+get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e)
+{
+ int tmp, i;
+ unsigned char buf [13];
+
+ tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf);
+ if (tmp != 12) {
+ dev_dbg(&dev->udev->dev,
+ "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
+ if (tmp >= 0)
+ tmp = -EINVAL;
+ return tmp;
+ }
+ for (i = tmp = 0; i < 6; i++, tmp += 2)
+ dev->net->dev_addr [i] =
+ (nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
+ return 0;
+}
+
+static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status;
+ struct cdc_state *info = (void *) &dev->data;
+
+ status = usbnet_generic_cdc_bind(dev, intf);
+ if (status < 0)
+ return status;
+
+ status = get_ethernet_addr(dev, info->ether);
+ if (status < 0) {
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver_of(intf), info->data);
+ return status;
+ }
+
+ /* FIXME cdc-ether has some multicast code too, though it complains
+ * in routine cases. info->ether describes the multicast support.
+ * Implement that here, manipulating the cdc filter as needed.
+ */
+ return 0;
+}
+
+static const struct driver_info cdc_info = {
+ .description = "CDC Ethernet Device",
+ .flags = FLAG_ETHER,
+ // .check_connect = cdc_check_connect,
+ .bind = cdc_bind,
+ .unbind = usbnet_cdc_unbind,
+ .status = cdc_status,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+static const struct usb_device_id products [] = {
+/*
+ * BLACKLIST !!
+ *
+ * First blacklist any products that are egregiously nonconformant
+ * with the CDC Ethernet specs. Minor braindamage we cope with; when
+ * they're not even trying, needing a separate driver is only the first
+ * of the differences to show up.
+ */
+
+#define ZAURUS_MASTER_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
+ * wire-incompatible with true CDC Ethernet implementations.
+ * (And, it seems, needlessly so...)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8004,
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* PXA-25x based Sharp Zaurii. Note that it seems some of these
+ * (later models especially) may have shipped only with firmware
+ * advertising false "CDC MDLM" compatibility ... but we're not
+ * clear which models did that, so for now let's assume the worst.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8005, /* A-300 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8006, /* B-500/SL-5600 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8007, /* C-700 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9031, /* C-750 C-760 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ /* reported with some C860 units */
+ .idProduct = 0x9050, /* C-860 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/*
+ * WHITELIST!!!
+ *
+ * CDC Ether uses two interfaces, not necessarily consecutive.
+ * We match the main interface, ignoring the optional device
+ * class so we could handle devices that aren't exclusively
+ * CDC ether.
+ *
+ * NOTE: this match must come AFTER entries blacklisting devices
+ * because of bugs/quirks in a given product (like Zaurus, above).
+ */
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cdc_driver = {
+ .owner = THIS_MODULE,
+ .name = "cdc_ether",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+
+static int __init cdc_init(void)
+{
+ BUG_ON((sizeof(((struct usbnet *)0)->data)
+ < sizeof(struct cdc_state)));
+
+ return usb_register(&cdc_driver);
+}
+module_init(cdc_init);
+
+static void __exit cdc_exit(void)
+{
+ usb_deregister(&cdc_driver);
+}
+module_exit(cdc_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB CDC Ethernet devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c
new file mode 100644
index 00000000000..f1730b685fd
--- /dev/null
+++ b/drivers/usb/net/cdc_subset.c
@@ -0,0 +1,335 @@
+/*
+ * Simple "CDC Subset" USB Networking Links
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * This supports simple USB network links that don't require any special
+ * framing or hardware control operations. The protocol used here is a
+ * strict subset of CDC Ethernet, with three basic differences reflecting
+ * the goal that almost any hardware should run it:
+ *
+ * - Minimal runtime control: one interface, no altsettings, and
+ * no vendor or class specific control requests. If a device is
+ * configured, it is allowed to exchange packets with the host.
+ * Fancier models would mean not working on some hardware.
+ *
+ * - Minimal manufacturing control: no IEEE "Organizationally
+ * Unique ID" required, or an EEPROMs to store one. Each host uses
+ * one random "locally assigned" Ethernet address instead, which can
+ * of course be overridden using standard tools like "ifconfig".
+ * (With 2^46 such addresses, same-net collisions are quite rare.)
+ *
+ * - There is no additional framing data for USB. Packets are written
+ * exactly as in CDC Ethernet, starting with an Ethernet header and
+ * terminated by a short packet. However, the host will never send a
+ * zero length packet; some systems can't handle those robustly.
+ *
+ * Anything that can transmit and receive USB bulk packets can implement
+ * this protocol. That includes both smart peripherals and quite a lot
+ * of "host-to-host" USB cables (which embed two devices back-to-back).
+ *
+ * Note that although Linux may use many of those host-to-host links
+ * with this "cdc_subset" framing, that doesn't mean there may not be a
+ * better approach. Handling the "other end unplugs/replugs" scenario
+ * well tends to require chip-specific vendor requests. Also, Windows
+ * peers at the other end of host-to-host cables may expect their own
+ * framing to be used rather than this "cdc_subset" model.
+ */
+
+#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_ALI_M5632
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * ALi M5632 driver ... does high speed
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info ali_m5632_info = {
+ .description = "ALi M5632",
+};
+
+
+#endif
+
+
+#ifdef CONFIG_USB_AN2720
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * AnchorChips 2720 driver ... http://www.cypress.com
+ *
+ * This doesn't seem to have a way to detect whether the peer is
+ * connected, or need any reset handshaking. It's got pretty big
+ * internal buffers (handles most of a frame's worth of data).
+ * Chip data sheets don't describe any vendor control messages.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info an2720_info = {
+ .description = "AnchorChips/Cypress 2720",
+ // no reset available!
+ // no check_connect available!
+
+ .in = 2, .out = 2, // direction distinguishes these
+};
+
+#endif /* CONFIG_USB_AN2720 */
+
+
+#ifdef CONFIG_USB_BELKIN
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
+ *
+ * ... also two eTEK designs, including one sold as "Advance USBNET"
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info belkin_info = {
+ .description = "Belkin, eTEK, or compatible",
+};
+
+#endif /* CONFIG_USB_BELKIN */
+
+
+
+#ifdef CONFIG_USB_EPSON2888
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * EPSON USB clients
+ *
+ * This is the same idea as Linux PDAs (below) except the firmware in the
+ * device might not be Tux-powered. Epson provides reference firmware that
+ * implements this interface. Product developers can reuse or modify that
+ * code, such as by using their own product and vendor codes.
+ *
+ * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info epson2888_info = {
+ .description = "Epson USB Device",
+ .check_connect = always_connected,
+
+ .in = 4, .out = 3,
+};
+
+#endif /* CONFIG_USB_EPSON2888 */
+
+
+#ifdef CONFIG_USB_KC2190
+#define HAVE_HARDWARE
+static const struct driver_info kc2190_info = {
+ .description = "KC Technology KC-190",
+};
+#endif /* CONFIG_USB_KC2190 */
+
+
+#ifdef CONFIG_USB_ARMLINUX
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Intel's SA-1100 chip integrates basic USB support, and is used
+ * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
+ * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
+ * network using minimal USB framing data.
+ *
+ * This describes the driver currently in standard ARM Linux kernels.
+ * The Zaurus uses a different driver (see later).
+ *
+ * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
+ * and different USB endpoint numbering than the SA1100 devices. The
+ * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
+ * so we rely on the endpoint descriptors.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info linuxdev_info = {
+ .description = "Linux Device",
+ .check_connect = always_connected,
+};
+
+static const struct driver_info yopy_info = {
+ .description = "Yopy",
+ .check_connect = always_connected,
+};
+
+static const struct driver_info blob_info = {
+ .description = "Boot Loader OBject",
+ .check_connect = always_connected,
+};
+
+#endif /* CONFIG_USB_ARMLINUX */
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef HAVE_HARDWARE
+#error You need to configure some hardware for this driver
+#endif
+
+/*
+ * chip vendor names won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id products [] = {
+
+#ifdef CONFIG_USB_ALI_M5632
+{
+ USB_DEVICE (0x0402, 0x5632), // ALi defaults
+ .driver_info = (unsigned long) &ali_m5632_info,
+},
+#endif
+
+#ifdef CONFIG_USB_AN2720
+{
+ USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults
+ .driver_info = (unsigned long) &an2720_info,
+}, {
+ USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET
+ .driver_info = (unsigned long) &an2720_info,
+},
+#endif
+
+#ifdef CONFIG_USB_BELKIN
+{
+ USB_DEVICE (0x050d, 0x0004), // Belkin
+ .driver_info = (unsigned long) &belkin_info,
+}, {
+ USB_DEVICE (0x056c, 0x8100), // eTEK
+ .driver_info = (unsigned long) &belkin_info,
+}, {
+ USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK)
+ .driver_info = (unsigned long) &belkin_info,
+},
+#endif
+
+#ifdef CONFIG_USB_EPSON2888
+{
+ USB_DEVICE (0x0525, 0x2888), // EPSON USB client
+ .driver_info = (unsigned long) &epson2888_info,
+},
+#endif
+
+#ifdef CONFIG_USB_KC2190
+{
+ USB_DEVICE (0x050f, 0x0190), // KC-190
+ .driver_info = (unsigned long) &kc2190_info,
+},
+#endif
+
+#ifdef CONFIG_USB_ARMLINUX
+/*
+ * SA-1100 using standard ARM Linux kernels, or compatible.
+ * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
+ * The sa-1100 "usb-eth" driver handles the basic framing.
+ *
+ * PXA25x or PXA210 ... these use a "usb-eth" driver much like
+ * the sa1100 one, but hardware uses different endpoint numbers.
+ *
+ * Or the Linux "Ethernet" gadget on hardware that can't talk
+ * CDC Ethernet (e.g., no altsettings), in either of two modes:
+ * - acting just like the old "usb-eth" firmware, though
+ * the implementation is different
+ * - supporting RNDIS as the first/default configuration for
+ * MS-Windows interop; Linux needs to use the other config
+ */
+{
+ // 1183 = 0x049F, both used as hex values?
+ // Compaq "Itsy" vendor/product id
+ USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible
+ .driver_info = (unsigned long) &linuxdev_info,
+}, {
+ USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy"
+ .driver_info = (unsigned long) &yopy_info,
+}, {
+ USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
+ .driver_info = (unsigned long) &blob_info,
+}, {
+ // Linux Ethernet/RNDIS gadget on pxa210/25x/26x, second config
+ // e.g. Gumstix, current OpenZaurus, ...
+ USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
+ .driver_info = (unsigned long) &linuxdev_info,
+},
+#endif
+
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_driver cdc_subset_driver = {
+ .owner = THIS_MODULE,
+ .name = "cdc_subset",
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+ .id_table = products,
+};
+
+static int __init cdc_subset_init(void)
+{
+ return usb_register(&cdc_subset_driver);
+}
+module_init(cdc_subset_init);
+
+static void __exit cdc_subset_exit(void)
+{
+ usb_deregister(&cdc_subset_driver);
+}
+module_exit(cdc_subset_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c
new file mode 100644
index 00000000000..c8763ae33c7
--- /dev/null
+++ b/drivers/usb/net/gl620a.c
@@ -0,0 +1,407 @@
+/*
+ * GeneSys GL620USB-A based links
+ * Copyright (C) 2001 by Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * Copyright (C) 2001 by Stanislav Brabec <utx@penguin.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * GeneSys GL620USB-A (www.genesyslogic.com.tw)
+ *
+ * ... should partially interop with the Win32 driver for this hardware.
+ * The GeneSys docs imply there's some NDIS issue motivating this framing.
+ *
+ * Some info from GeneSys:
+ * - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
+ * (Some cables, like the BAFO-100c, use the half duplex version.)
+ * - For the full duplex model, the low bit of the version code says
+ * which side is which ("left/right").
+ * - For the half duplex type, a control/interrupt handshake settles
+ * the transfer direction. (That's disabled here, partially coded.)
+ * A control URB would block until other side writes an interrupt.
+ *
+ * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
+ */
+
+// control msg write command
+#define GENELINK_CONNECT_WRITE 0xF0
+// interrupt pipe index
+#define GENELINK_INTERRUPT_PIPE 0x03
+// interrupt read buffer size
+#define INTERRUPT_BUFSIZE 0x08
+// interrupt pipe interval value
+#define GENELINK_INTERRUPT_INTERVAL 0x10
+// max transmit packet number per transmit
+#define GL_MAX_TRANSMIT_PACKETS 32
+// max packet length
+#define GL_MAX_PACKET_LEN 1514
+// max receive buffer size
+#define GL_RCV_BUF_SIZE \
+ (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
+
+struct gl_packet {
+ u32 packet_length;
+ char packet_data [1];
+};
+
+struct gl_header {
+ u32 packet_count;
+ struct gl_packet packets;
+};
+
+#ifdef GENELINK_ACK
+
+// FIXME: this code is incomplete, not debugged; it doesn't
+// handle interrupts correctly; it should use the generic
+// status IRQ code (which didn't exist back in 2001).
+
+struct gl_priv {
+ struct urb *irq_urb;
+ char irq_buf [INTERRUPT_BUFSIZE];
+};
+
+static inline int gl_control_write(struct usbnet *dev, u8 request, u16 value)
+{
+ int retval;
+
+ retval = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ request,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ value,
+ 0, // index
+ 0, // data buffer
+ 0, // size
+ USB_CTRL_SET_TIMEOUT);
+ return retval;
+}
+
+static void gl_interrupt_complete(struct urb *urb, struct pt_regs *regs)
+{
+ int status = urb->status;
+
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ }
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status)
+ err("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, status);
+}
+
+static int gl_interrupt_read(struct usbnet *dev)
+{
+ struct gl_priv *priv = dev->priv_data;
+ int retval;
+
+ // issue usb interrupt read
+ if (priv && priv->irq_urb) {
+ // submit urb
+ if ((retval = usb_submit_urb(priv->irq_urb, GFP_KERNEL)) != 0)
+ dbg("gl_interrupt_read: submit fail - %X...", retval);
+ else
+ dbg("gl_interrupt_read: submit success...");
+ }
+
+ return 0;
+}
+
+// check whether another side is connected
+static int genelink_check_connect(struct usbnet *dev)
+{
+ int retval;
+
+ dbg("genelink_check_connect...");
+
+ // detect whether another side is connected
+ if ((retval = gl_control_write(dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
+ dbg("%s: genelink_check_connect write fail - %X",
+ dev->net->name, retval);
+ return retval;
+ }
+
+ // usb interrupt read to ack another side
+ if ((retval = gl_interrupt_read(dev)) != 0) {
+ dbg("%s: genelink_check_connect read fail - %X",
+ dev->net->name, retval);
+ return retval;
+ }
+
+ dbg("%s: genelink_check_connect read success", dev->net->name);
+ return 0;
+}
+
+// allocate and initialize the private data for genelink
+static int genelink_init(struct usbnet *dev)
+{
+ struct gl_priv *priv;
+
+ // allocate the private data structure
+ if ((priv = kmalloc(sizeof *priv, GFP_KERNEL)) == 0) {
+ dbg("%s: cannot allocate private data per device",
+ dev->net->name);
+ return -ENOMEM;
+ }
+
+ // allocate irq urb
+ if ((priv->irq_urb = usb_alloc_urb(0, GFP_KERNEL)) == 0) {
+ dbg("%s: cannot allocate private irq urb per device",
+ dev->net->name);
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ // fill irq urb
+ usb_fill_int_urb(priv->irq_urb, dev->udev,
+ usb_rcvintpipe(dev->udev, GENELINK_INTERRUPT_PIPE),
+ priv->irq_buf, INTERRUPT_BUFSIZE,
+ gl_interrupt_complete, 0,
+ GENELINK_INTERRUPT_INTERVAL);
+
+ // set private data pointer
+ dev->priv_data = priv;
+
+ return 0;
+}
+
+// release the private data
+static int genelink_free(struct usbnet *dev)
+{
+ struct gl_priv *priv = dev->priv_data;
+
+ if (!priv)
+ return 0;
+
+// FIXME: can't cancel here; it's synchronous, and
+// should have happened earlier in any case (interrupt
+// handling needs to be generic)
+
+ // cancel irq urb first
+ usb_kill_urb(priv->irq_urb);
+
+ // free irq urb
+ usb_free_urb(priv->irq_urb);
+
+ // free the private data structure
+ kfree(priv);
+
+ return 0;
+}
+
+#endif
+
+static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct gl_header *header;
+ struct gl_packet *packet;
+ struct sk_buff *gl_skb;
+ u32 size;
+
+ header = (struct gl_header *) skb->data;
+
+ // get the packet count of the received skb
+ le32_to_cpus(&header->packet_count);
+ if ((header->packet_count > GL_MAX_TRANSMIT_PACKETS)
+ || (header->packet_count < 0)) {
+ dbg("genelink: invalid received packet count %d",
+ header->packet_count);
+ return 0;
+ }
+
+ // set the current packet pointer to the first packet
+ packet = &header->packets;
+
+ // decrement the length for the packet count size 4 bytes
+ skb_pull(skb, 4);
+
+ while (header->packet_count > 1) {
+ // get the packet length
+ size = le32_to_cpu(packet->packet_length);
+
+ // this may be a broken packet
+ if (size > GL_MAX_PACKET_LEN) {
+ dbg("genelink: invalid rx length %d", size);
+ return 0;
+ }
+
+ // allocate the skb for the individual packet
+ gl_skb = alloc_skb(size, GFP_ATOMIC);
+ if (gl_skb) {
+
+ // copy the packet data to the new skb
+ memcpy(skb_put(gl_skb, size),
+ packet->packet_data, size);
+ usbnet_skb_return(dev, gl_skb);
+ }
+
+ // advance to the next packet
+ packet = (struct gl_packet *)
+ &packet->packet_data [size];
+ header->packet_count--;
+
+ // shift the data pointer to the next gl_packet
+ skb_pull(skb, size + 4);
+ }
+
+ // skip the packet length field 4 bytes
+ skb_pull(skb, 4);
+
+ if (skb->len > GL_MAX_PACKET_LEN) {
+ dbg("genelink: invalid rx length %d", skb->len);
+ return 0;
+ }
+ return 1;
+}
+
+static struct sk_buff *
+genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+{
+ int padlen;
+ int length = skb->len;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 *packet_count;
+ u32 *packet_len;
+
+ // FIXME: magic numbers, bleech
+ padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
+
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
+ if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + (4 + 4*1),
+ skb->data, skb->len);
+ skb->tail = skb->data + skb->len;
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ // attach the packet count to the header
+ packet_count = (u32 *) skb_push(skb, (4 + 4*1));
+ packet_len = packet_count + 1;
+
+ *packet_count = cpu_to_le32(1);
+ *packet_len = cpu_to_le32(length);
+
+ // add padding byte
+ if ((skb->len % dev->maxpacket) == 0)
+ skb_put(skb, 1);
+
+ return skb;
+}
+
+static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ dev->hard_mtu = GL_RCV_BUF_SIZE;
+ dev->net->hard_header_len += 4;
+ dev->in = usb_rcvbulkpipe(dev->udev, dev->driver_info->in);
+ dev->out = usb_sndbulkpipe(dev->udev, dev->driver_info->out);
+ return 0;
+}
+
+static const struct driver_info genelink_info = {
+ .description = "Genesys GeneLink",
+ .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT,
+ .bind = genelink_bind,
+ .rx_fixup = genelink_rx_fixup,
+ .tx_fixup = genelink_tx_fixup,
+
+ .in = 1, .out = 2,
+
+#ifdef GENELINK_ACK
+ .check_connect =genelink_check_connect,
+#endif
+};
+
+static const struct usb_device_id products [] = {
+
+{
+ USB_DEVICE(0x05e3, 0x0502), // GL620USB-A
+ .driver_info = (unsigned long) &genelink_info,
+},
+ /* NOT: USB_DEVICE(0x05e3, 0x0501), // GL620USB
+ * that's half duplex, not currently supported
+ */
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver gl620a_driver = {
+ .owner = THIS_MODULE,
+ .name = "gl620a",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init usbnet_init(void)
+{
+ return usb_register(&gl620a_driver);
+}
+module_init(usbnet_init);
+
+static void __exit usbnet_exit(void)
+{
+ usb_deregister(&gl620a_driver);
+}
+module_exit(usbnet_exit);
+
+MODULE_AUTHOR("Jiun-Jie Huang");
+MODULE_DESCRIPTION("GL620-USB-A Host-to-Host Link cables");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index 7ffa99b9760..e04b0ce3611 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -787,7 +787,6 @@ static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
kaweth_usb_transmit_complete,
kaweth);
kaweth->end = 0;
- kaweth->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
if((res = usb_submit_urb(kaweth->tx_urb, GFP_ATOMIC)))
{
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
new file mode 100644
index 00000000000..a4309c4a491
--- /dev/null
+++ b/drivers/usb/net/net1080.c
@@ -0,0 +1,622 @@
+/*
+ * Net1080 based USB host-to-host cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include <asm/unaligned.h>
+
+#include "usbnet.h"
+
+
+/*
+ * Netchip 1080 driver ... http://www.netchip.com
+ * (Sept 2004: End-of-life announcement has been sent.)
+ * Used in (some) LapLink cables
+ */
+
+#define frame_errors data[1]
+
+/*
+ * NetChip framing of ethernet packets, supporting additional error
+ * checks for links that may drop bulk packets from inside messages.
+ * Odd USB length == always short read for last usb packet.
+ * - nc_header
+ * - Ethernet header (14 bytes)
+ * - payload
+ * - (optional padding byte, if needed so length becomes odd)
+ * - nc_trailer
+ *
+ * This framing is to be avoided for non-NetChip devices.
+ */
+
+struct nc_header { // packed:
+ __le16 hdr_len; // sizeof nc_header (LE, all)
+ __le16 packet_len; // payload size (including ethhdr)
+ __le16 packet_id; // detects dropped packets
+#define MIN_HEADER 6
+
+ // all else is optional, and must start with:
+ // __le16 vendorId; // from usb-if
+ // __le16 productId;
+} __attribute__((__packed__));
+
+#define PAD_BYTE ((unsigned char)0xAC)
+
+struct nc_trailer {
+ __le16 packet_id;
+} __attribute__((__packed__));
+
+// packets may use FLAG_FRAMING_NC and optional pad
+#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
+ + sizeof (struct ethhdr) \
+ + (mtu) \
+ + 1 \
+ + sizeof (struct nc_trailer))
+
+#define MIN_FRAMED FRAMED_SIZE(0)
+
+/* packets _could_ be up to 64KB... */
+#define NC_MAX_PACKET 32767
+
+
+/*
+ * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
+ * before the hardware drops it. If that's done, the driver will need to
+ * frame network packets to guard against the dropped USB packets. The win32
+ * driver sets this for both sides of the link.
+ */
+#define NC_READ_TTL_MS ((u8)255) // ms
+
+/*
+ * We ignore most registers and EEPROM contents.
+ */
+#define REG_USBCTL ((u8)0x04)
+#define REG_TTL ((u8)0x10)
+#define REG_STATUS ((u8)0x11)
+
+/*
+ * Vendor specific requests to read/write data
+ */
+#define REQUEST_REGISTER ((u8)0x10)
+#define REQUEST_EEPROM ((u8)0x11)
+
+static int
+nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
+{
+ int status = usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ req,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, regnum,
+ retval_ptr, sizeof *retval_ptr,
+ USB_CTRL_GET_TIMEOUT);
+ if (status > 0)
+ status = 0;
+ if (!status)
+ le16_to_cpus(retval_ptr);
+ return status;
+}
+
+static inline int
+nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
+{
+ return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
+}
+
+// no retval ... can become async, usable in_interrupt()
+static void
+nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
+{
+ usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ req,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, regnum,
+ NULL, 0, // data is in setup packet
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static inline void
+nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
+{
+ nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
+}
+
+
+#if 0
+static void nc_dump_registers(struct usbnet *dev)
+{
+ u8 reg;
+ u16 *vp = kmalloc(sizeof (u16));
+
+ if (!vp) {
+ dbg("no memory?");
+ return;
+ }
+
+ dbg("%s registers:", dev->net->name);
+ for (reg = 0; reg < 0x20; reg++) {
+ int retval;
+
+ // reading some registers is trouble
+ if (reg >= 0x08 && reg <= 0xf)
+ continue;
+ if (reg >= 0x12 && reg <= 0x1e)
+ continue;
+
+ retval = nc_register_read(dev, reg, vp);
+ if (retval < 0)
+ dbg("%s reg [0x%x] ==> error %d",
+ dev->net->name, reg, retval);
+ else
+ dbg("%s reg [0x%x] = 0x%x",
+ dev->net->name, reg, *vp);
+ }
+ kfree(vp);
+}
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Control register
+ */
+
+#define USBCTL_WRITABLE_MASK 0x1f0f
+// bits 15-13 reserved, r/o
+#define USBCTL_ENABLE_LANG (1 << 12)
+#define USBCTL_ENABLE_MFGR (1 << 11)
+#define USBCTL_ENABLE_PROD (1 << 10)
+#define USBCTL_ENABLE_SERIAL (1 << 9)
+#define USBCTL_ENABLE_DEFAULTS (1 << 8)
+// bits 7-4 reserved, r/o
+#define USBCTL_FLUSH_OTHER (1 << 3)
+#define USBCTL_FLUSH_THIS (1 << 2)
+#define USBCTL_DISCONN_OTHER (1 << 1)
+#define USBCTL_DISCONN_THIS (1 << 0)
+
+static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
+{
+ if (!netif_msg_link(dev))
+ return;
+ devdbg(dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
+ " this%s%s;"
+ " other%s%s; r/o 0x%x",
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ usbctl,
+ (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
+ (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
+ (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
+ (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
+ (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
+
+ (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
+ (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
+ (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
+ (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
+ usbctl & ~USBCTL_WRITABLE_MASK
+ );
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Status register
+ */
+
+#define STATUS_PORT_A (1 << 15)
+
+#define STATUS_CONN_OTHER (1 << 14)
+#define STATUS_SUSPEND_OTHER (1 << 13)
+#define STATUS_MAILBOX_OTHER (1 << 12)
+#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03)
+
+#define STATUS_CONN_THIS (1 << 6)
+#define STATUS_SUSPEND_THIS (1 << 5)
+#define STATUS_MAILBOX_THIS (1 << 4)
+#define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03)
+
+#define STATUS_UNSPEC_MASK 0x0c8c
+#define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK))
+
+
+static inline void nc_dump_status(struct usbnet *dev, u16 status)
+{
+ if (!netif_msg_link(dev))
+ return;
+ devdbg(dev, "net1080 %s-%s status 0x%x:"
+ " this (%c) PKT=%d%s%s%s;"
+ " other PKT=%d%s%s%s; unspec 0x%x",
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ status,
+
+ // XXX the packet counts don't seem right
+ // (1 at reset, not 0); maybe UNSPEC too
+
+ (status & STATUS_PORT_A) ? 'A' : 'B',
+ STATUS_PACKETS_THIS(status),
+ (status & STATUS_CONN_THIS) ? " CON" : "",
+ (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
+ (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
+
+ STATUS_PACKETS_OTHER(status),
+ (status & STATUS_CONN_OTHER) ? " CON" : "",
+ (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
+ (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
+
+ status & STATUS_UNSPEC_MASK
+ );
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * TTL register
+ */
+
+#define TTL_THIS(ttl) (0x00ff & ttl)
+#define TTL_OTHER(ttl) (0x00ff & (ttl >> 8))
+#define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this))))
+
+static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
+{
+ if (netif_msg_link(dev))
+ devdbg(dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int net1080_reset(struct usbnet *dev)
+{
+ u16 usbctl, status, ttl;
+ u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL);
+ int retval;
+
+ if (!vp)
+ return -ENOMEM;
+
+ // nc_dump_registers(dev);
+
+ if ((retval = nc_register_read(dev, REG_STATUS, vp)) < 0) {
+ dbg("can't read %s-%s status: %d",
+ dev->udev->bus->bus_name, dev->udev->devpath, retval);
+ goto done;
+ }
+ status = *vp;
+ nc_dump_status(dev, status);
+
+ if ((retval = nc_register_read(dev, REG_USBCTL, vp)) < 0) {
+ dbg("can't read USBCTL, %d", retval);
+ goto done;
+ }
+ usbctl = *vp;
+ nc_dump_usbctl(dev, usbctl);
+
+ nc_register_write(dev, REG_USBCTL,
+ USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
+
+ if ((retval = nc_register_read(dev, REG_TTL, vp)) < 0) {
+ dbg("can't read TTL, %d", retval);
+ goto done;
+ }
+ ttl = *vp;
+ // nc_dump_ttl(dev, ttl);
+
+ nc_register_write(dev, REG_TTL,
+ MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
+ dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
+
+ if (netif_msg_link(dev))
+ devinfo(dev, "port %c, peer %sconnected",
+ (status & STATUS_PORT_A) ? 'A' : 'B',
+ (status & STATUS_CONN_OTHER) ? "" : "dis"
+ );
+ retval = 0;
+
+done:
+ kfree(vp);
+ return retval;
+}
+
+static int net1080_check_connect(struct usbnet *dev)
+{
+ int retval;
+ u16 status;
+ u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL);
+
+ if (!vp)
+ return -ENOMEM;
+ retval = nc_register_read(dev, REG_STATUS, vp);
+ status = *vp;
+ kfree(vp);
+ if (retval != 0) {
+ dbg("%s net1080_check_conn read - %d", dev->net->name, retval);
+ return retval;
+ }
+ if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
+ return -ENOLINK;
+ return 0;
+}
+
+static void nc_flush_complete(struct urb *urb, struct pt_regs *regs)
+{
+ kfree(urb->context);
+ usb_free_urb(urb);
+}
+
+static void nc_ensure_sync(struct usbnet *dev)
+{
+ dev->frame_errors++;
+ if (dev->frame_errors > 5) {
+ struct urb *urb;
+ struct usb_ctrlrequest *req;
+ int status;
+
+ /* Send a flush */
+ urb = usb_alloc_urb(0, SLAB_ATOMIC);
+ if (!urb)
+ return;
+
+ req = kmalloc(sizeof *req, GFP_ATOMIC);
+ if (!req) {
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT
+ | USB_TYPE_VENDOR
+ | USB_RECIP_DEVICE;
+ req->bRequest = REQUEST_REGISTER;
+ req->wValue = cpu_to_le16(USBCTL_FLUSH_THIS
+ | USBCTL_FLUSH_OTHER);
+ req->wIndex = cpu_to_le16(REG_USBCTL);
+ req->wLength = cpu_to_le16(0);
+
+ /* queue an async control request, we don't need
+ * to do anything when it finishes except clean up.
+ */
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (unsigned char *) req,
+ NULL, 0,
+ nc_flush_complete, req);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ kfree(req);
+ usb_free_urb(urb);
+ return;
+ }
+
+ if (netif_msg_rx_err(dev))
+ devdbg(dev, "flush net1080; too many framing errors");
+ dev->frame_errors = 0;
+ }
+}
+
+static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct nc_header *header;
+ struct nc_trailer *trailer;
+ u16 hdr_len, packet_len;
+
+ if (!(skb->len & 0x01)) {
+#ifdef DEBUG
+ struct net_device *net = dev->net;
+ dbg("rx framesize %d range %d..%d mtu %d", skb->len,
+ net->hard_header_len, dev->hard_mtu, net->mtu);
+#endif
+ dev->stats.rx_frame_errors++;
+ nc_ensure_sync(dev);
+ return 0;
+ }
+
+ header = (struct nc_header *) skb->data;
+ hdr_len = le16_to_cpup(&header->hdr_len);
+ packet_len = le16_to_cpup(&header->packet_len);
+ if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
+ dev->stats.rx_frame_errors++;
+ dbg("packet too big, %d", packet_len);
+ nc_ensure_sync(dev);
+ return 0;
+ } else if (hdr_len < MIN_HEADER) {
+ dev->stats.rx_frame_errors++;
+ dbg("header too short, %d", hdr_len);
+ nc_ensure_sync(dev);
+ return 0;
+ } else if (hdr_len > MIN_HEADER) {
+ // out of band data for us?
+ dbg("header OOB, %d bytes", hdr_len - MIN_HEADER);
+ nc_ensure_sync(dev);
+ // switch (vendor/product ids) { ... }
+ }
+ skb_pull(skb, hdr_len);
+
+ trailer = (struct nc_trailer *)
+ (skb->data + skb->len - sizeof *trailer);
+ skb_trim(skb, skb->len - sizeof *trailer);
+
+ if ((packet_len & 0x01) == 0) {
+ if (skb->data [packet_len] != PAD_BYTE) {
+ dev->stats.rx_frame_errors++;
+ dbg("bad pad");
+ return 0;
+ }
+ skb_trim(skb, skb->len - 1);
+ }
+ if (skb->len != packet_len) {
+ dev->stats.rx_frame_errors++;
+ dbg("bad packet len %d (expected %d)",
+ skb->len, packet_len);
+ nc_ensure_sync(dev);
+ return 0;
+ }
+ if (header->packet_id != get_unaligned(&trailer->packet_id)) {
+ dev->stats.rx_fifo_errors++;
+ dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
+ le16_to_cpu(header->packet_id),
+ le16_to_cpu(trailer->packet_id));
+ return 0;
+ }
+#if 0
+ devdbg(dev, "frame <rx h %d p %d id %d", header->hdr_len,
+ header->packet_len, header->packet_id);
+#endif
+ dev->frame_errors = 0;
+ return 1;
+}
+
+static struct sk_buff *
+net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+{
+ int padlen;
+ struct sk_buff *skb2;
+ struct nc_header *header = NULL;
+ struct nc_trailer *trailer = NULL;
+ int len = skb->len;
+
+ padlen = ((len + sizeof (struct nc_header)
+ + sizeof (struct nc_trailer)) & 0x01) ? 0 : 1;
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((padlen + sizeof (struct nc_trailer)) <= tailroom
+ && sizeof (struct nc_header) <= headroom)
+ /* There's enough head and tail room */
+ goto encapsulate;
+
+ if ((sizeof (struct nc_header) + padlen
+ + sizeof (struct nc_trailer)) <
+ (headroom + tailroom)) {
+ /* There's enough total room, so just readjust */
+ skb->data = memmove(skb->head
+ + sizeof (struct nc_header),
+ skb->data, skb->len);
+ skb->tail = skb->data + len;
+ goto encapsulate;
+ }
+ }
+
+ /* Create a new skb to use with the correct size */
+ skb2 = skb_copy_expand(skb,
+ sizeof (struct nc_header),
+ sizeof (struct nc_trailer) + padlen,
+ flags);
+ dev_kfree_skb_any(skb);
+ if (!skb2)
+ return skb2;
+ skb = skb2;
+
+encapsulate:
+ /* header first */
+ header = (struct nc_header *) skb_push(skb, sizeof *header);
+ header->hdr_len = cpu_to_le16(sizeof (*header));
+ header->packet_len = cpu_to_le16(len);
+ header->packet_id = cpu_to_le16((u16)dev->xid++);
+
+ /* maybe pad; then trailer */
+ if (!((skb->len + sizeof *trailer) & 0x01))
+ *skb_put(skb, 1) = PAD_BYTE;
+ trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
+ put_unaligned(header->packet_id, &trailer->packet_id);
+#if 0
+ devdbg(dev, "frame >tx h %d p %d id %d",
+ header->hdr_len, header->packet_len,
+ header->packet_id);
+#endif
+ return skb;
+}
+
+static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ unsigned extra = sizeof (struct nc_header)
+ + 1
+ + sizeof (struct nc_trailer);
+
+ dev->net->hard_header_len += extra;
+ dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+ dev->hard_mtu = NC_MAX_PACKET;
+ return usbnet_get_endpoints (dev, intf);
+}
+
+static const struct driver_info net1080_info = {
+ .description = "NetChip TurboCONNECT",
+ .flags = FLAG_FRAMING_NC,
+ .bind = net1080_bind,
+ .reset = net1080_reset,
+ .check_connect = net1080_check_connect,
+ .rx_fixup = net1080_rx_fixup,
+ .tx_fixup = net1080_tx_fixup,
+};
+
+static const struct usb_device_id products [] = {
+{
+ USB_DEVICE(0x0525, 0x1080), // NetChip ref design
+ .driver_info = (unsigned long) &net1080_info,
+}, {
+ USB_DEVICE(0x06D0, 0x0622), // Laplink Gold
+ .driver_info = (unsigned long) &net1080_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver net1080_driver = {
+ .owner = THIS_MODULE,
+ .name = "net1080",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init net1080_init(void)
+{
+ return usb_register(&net1080_driver);
+}
+module_init(net1080_init);
+
+static void __exit net1080_exit(void)
+{
+ usb_deregister(&net1080_driver);
+}
+module_exit(net1080_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index fcd6d3ccef4..7484d34780f 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -825,7 +825,6 @@ static void pegasus_tx_timeout(struct net_device *net)
pegasus_t *pegasus = netdev_priv(net);
if (netif_msg_timer(pegasus))
printk(KERN_WARNING "%s: tx timeout\n", net->name);
- pegasus->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(pegasus->tx_urb);
pegasus->stats.tx_errors++;
}
diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c
new file mode 100644
index 00000000000..74c2b3581c7
--- /dev/null
+++ b/drivers/usb/net/plusb.c
@@ -0,0 +1,156 @@
+/*
+ * PL-2301/2302 USB host-to-host link cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ *
+ * The protocol and handshaking used here should be bug-compatible
+ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
+ *
+ * HEADS UP: this handshaking isn't all that robust. This driver
+ * gets confused easily if you unplug one end of the cable then
+ * try to connect it again; you'll need to restart both ends. The
+ * "naplink" software (used by some PlayStation/2 deveopers) does
+ * the handshaking much better! Also, sometimes this hardware
+ * seems to get wedged under load. Prolific docs are weak, and
+ * don't identify differences between PL2301 and PL2302, much less
+ * anything to explain the different PL2302 versions observed.
+ */
+
+/*
+ * Bits 0-4 can be used for software handshaking; they're set from
+ * one end, cleared from the other, "read" with the interrupt byte.
+ */
+#define PL_S_EN (1<<7) /* (feature only) suspend enable */
+/* reserved bit -- rx ready (6) ? */
+#define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */
+#define PL_RESET_OUT (1<<4) /* reset output pipe */
+#define PL_RESET_IN (1<<3) /* reset input pipe */
+#define PL_TX_C (1<<2) /* transmission complete */
+#define PL_TX_REQ (1<<1) /* transmission received */
+#define PL_PEER_E (1<<0) /* peer exists */
+
+static inline int
+pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
+{
+ return usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ req,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ val, index,
+ NULL, 0,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static inline int
+pl_clear_QuickLink_features(struct usbnet *dev, int val)
+{
+ return pl_vendor_req(dev, 1, (u8) val, 0);
+}
+
+static inline int
+pl_set_QuickLink_features(struct usbnet *dev, int val)
+{
+ return pl_vendor_req(dev, 3, (u8) val, 0);
+}
+
+static int pl_reset(struct usbnet *dev)
+{
+ /* some units seem to need this reset, others reject it utterly.
+ * FIXME be more like "naplink" or windows drivers.
+ */
+ (void) pl_set_QuickLink_features(dev,
+ PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+ return 0;
+}
+
+static const struct driver_info prolific_info = {
+ .description = "Prolific PL-2301/PL-2302",
+ .flags = FLAG_NO_SETINT,
+ /* some PL-2302 versions seem to fail usb_set_interface() */
+ .reset = pl_reset,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Proilific's name won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id products [] = {
+
+{
+ USB_DEVICE(0x067b, 0x0000), // PL-2301
+ .driver_info = (unsigned long) &prolific_info,
+}, {
+ USB_DEVICE(0x067b, 0x0001), // PL-2302
+ .driver_info = (unsigned long) &prolific_info,
+},
+
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver plusb_driver = {
+ .owner = THIS_MODULE,
+ .name = "plusb",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init plusb_init(void)
+{
+ return usb_register(&plusb_driver);
+}
+module_init(plusb_init);
+
+static void __exit plusb_exit(void)
+{
+ usb_deregister(&plusb_driver);
+}
+module_exit(plusb_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
new file mode 100644
index 00000000000..2ed2e5fb777
--- /dev/null
+++ b/drivers/usb/net/rndis_host.c
@@ -0,0 +1,615 @@
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb_cdc.h>
+
+#include "usbnet.h"
+
+
+/*
+ * RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of
+ * course ACM was intended for modems, not Ethernet links! USB's standard
+ * for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ */
+
+/*
+ * CONTROL uses CDC "encapsulated commands" with funky notifications.
+ * - control-out: SEND_ENCAPSULATED
+ * - interrupt-in: RESPONSE_AVAILABLE
+ * - control-in: GET_ENCAPSULATED
+ *
+ * We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ */
+struct rndis_msg_hdr {
+ __le32 msg_type; /* RNDIS_MSG_* */
+ __le32 msg_len;
+ // followed by data that varies between messages
+ __le32 request_id;
+ __le32 status;
+ // ... and more
+} __attribute__ ((packed));
+
+/* RNDIS defines this (absurdly huge) control timeout */
+#define RNDIS_CONTROL_TIMEOUT_MS (10 * 1000)
+
+
+#define ccpu2 __constant_cpu_to_le32
+
+#define RNDIS_MSG_COMPLETION ccpu2(0x80000000)
+
+/* codes for "msg_type" field of rndis messages;
+ * only the data channel uses packet messages (maybe batched);
+ * everything else goes on the control channel.
+ */
+#define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */
+#define RNDIS_MSG_INIT ccpu2(0x00000002)
+#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_HALT ccpu2(0x00000003)
+#define RNDIS_MSG_QUERY ccpu2(0x00000004)
+#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET ccpu2(0x00000005)
+#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET ccpu2(0x00000006)
+#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INDICATE ccpu2(0x00000007)
+#define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008)
+#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+
+/* codes for "status" field of completion messages */
+#define RNDIS_STATUS_SUCCESS ccpu2(0x00000000)
+#define RNDIS_STATUS_FAILURE ccpu2(0xc0000001)
+#define RNDIS_STATUS_INVALID_DATA ccpu2(0xc0010015)
+#define RNDIS_STATUS_NOT_SUPPORTED ccpu2(0xc00000bb)
+#define RNDIS_STATUS_MEDIA_CONNECT ccpu2(0x4001000b)
+#define RNDIS_STATUS_MEDIA_DISCONNECT ccpu2(0x4001000c)
+
+
+struct rndis_data_hdr {
+ __le32 msg_type; /* RNDIS_MSG_PACKET */
+ __le32 msg_len; // rndis_data_hdr + data_len + pad
+ __le32 data_offset; // 36 -- right after header
+ __le32 data_len; // ... real packet size
+
+ __le32 oob_data_offset; // zero
+ __le32 oob_data_len; // zero
+ __le32 num_oob; // zero
+ __le32 packet_data_offset; // zero
+
+ __le32 packet_data_len; // zero
+ __le32 vc_handle; // zero
+ __le32 reserved; // zero
+} __attribute__ ((packed));
+
+struct rndis_init { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_INIT */
+ __le32 msg_len; // 24
+ __le32 request_id;
+ __le32 major_version; // of rndis (1.0)
+ __le32 minor_version;
+ __le32 max_transfer_size;
+} __attribute__ ((packed));
+
+struct rndis_init_c { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_INIT_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 major_version; // of rndis (1.0)
+ __le32 minor_version;
+ __le32 device_flags;
+ __le32 medium; // zero == 802.3
+ __le32 max_packets_per_message;
+ __le32 max_transfer_size;
+ __le32 packet_alignment; // max 7; (1<<n) bytes
+ __le32 af_list_offset; // zero
+ __le32 af_list_size; // zero
+} __attribute__ ((packed));
+
+struct rndis_halt { /* OUT (no reply) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_HALT */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_query { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_QUERY */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; // zero
+} __attribute__ ((packed));
+
+struct rndis_query_c { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_QUERY_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 len;
+ __le32 offset;
+} __attribute__ ((packed));
+
+struct rndis_set { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_SET */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; // zero
+} __attribute__ ((packed));
+
+struct rndis_set_c { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_SET_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+struct rndis_reset { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_RESET */
+ __le32 msg_len;
+ __le32 reserved;
+} __attribute__ ((packed));
+
+struct rndis_reset_c { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_RESET_C */
+ __le32 msg_len;
+ __le32 status;
+ __le32 addressing_lost;
+} __attribute__ ((packed));
+
+struct rndis_indicate { /* IN (unrequested) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_INDICATE */
+ __le32 msg_len;
+ __le32 status;
+ __le32 length;
+ __le32 offset;
+/**/ __le32 diag_status;
+ __le32 error_offset;
+/**/ __le32 message;
+} __attribute__ ((packed));
+
+struct rndis_keepalive { /* OUT (optionally IN) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_keepalive_c { /* IN (optionally OUT) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+/* NOTE: about 30 OIDs are "mandatory" for peripherals to support ... and
+ * there are gobs more that may optionally be supported. We'll avoid as much
+ * of that mess as possible.
+ */
+#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101)
+#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e)
+
+/*
+ * RNDIS notifications from device: command completion; "reverse"
+ * keepalives; etc
+ */
+static void rndis_status(struct usbnet *dev, struct urb *urb)
+{
+ devdbg(dev, "rndis status urb, len %d stat %d",
+ urb->actual_length, urb->status);
+ // FIXME for keepalives, respond immediately (asynchronously)
+ // if not an RNDIS status, do like cdc_status(dev,urb) does
+}
+
+/*
+ * RPC done RNDIS-style. Caller guarantees:
+ * - message is properly byteswapped
+ * - there's no other request pending
+ * - buf can hold up to 1KB response (required by RNDIS spec)
+ * On return, the first few entries are already byteswapped.
+ *
+ * Call context is likely probe(), before interface name is known,
+ * which is why we won't try to use it in the diagnostics.
+ */
+static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ int retval;
+ unsigned count;
+ __le32 rsp;
+ u32 xid = 0, msg_len, request_id;
+
+ /* REVISIT when this gets called from contexts other than probe() or
+ * disconnect(): either serialize, or dispatch responses on xid
+ */
+
+ /* Issue the request; don't bother byteswapping our xid */
+ if (likely(buf->msg_type != RNDIS_MSG_HALT
+ && buf->msg_type != RNDIS_MSG_RESET)) {
+ xid = dev->xid++;
+ if (!xid)
+ xid = dev->xid++;
+ buf->request_id = (__force __le32) xid;
+ }
+ retval = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SEND_ENCAPSULATED_COMMAND,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, info->u->bMasterInterface0,
+ buf, le32_to_cpu(buf->msg_len),
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (unlikely(retval < 0 || xid == 0))
+ return retval;
+
+ // FIXME Seems like some devices discard responses when
+ // we time out and cancel our "get response" requests...
+ // so, this is fragile. Probably need to poll for status.
+
+ /* ignore status endpoint, just poll the control channel;
+ * the request probably completed immediately
+ */
+ rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
+ for (count = 0; count < 10; count++) {
+ memset(buf, 0, 1024);
+ retval = usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ USB_CDC_GET_ENCAPSULATED_RESPONSE,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, info->u->bMasterInterface0,
+ buf, 1024,
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (likely(retval >= 8)) {
+ msg_len = le32_to_cpu(buf->msg_len);
+ request_id = (__force u32) buf->request_id;
+ if (likely(buf->msg_type == rsp)) {
+ if (likely(request_id == xid)) {
+ if (unlikely(rsp == RNDIS_MSG_RESET_C))
+ return 0;
+ if (likely(RNDIS_STATUS_SUCCESS
+ == buf->status))
+ return 0;
+ dev_dbg(&info->control->dev,
+ "rndis reply status %08x\n",
+ le32_to_cpu(buf->status));
+ return -EL3RST;
+ }
+ dev_dbg(&info->control->dev,
+ "rndis reply id %d expected %d\n",
+ request_id, xid);
+ /* then likely retry */
+ } else switch (buf->msg_type) {
+ case RNDIS_MSG_INDICATE: { /* fault */
+ // struct rndis_indicate *msg = (void *)buf;
+ dev_info(&info->control->dev,
+ "rndis fault indication\n");
+ }
+ break;
+ case RNDIS_MSG_KEEPALIVE: { /* ping */
+ struct rndis_keepalive_c *msg = (void *)buf;
+
+ msg->msg_type = RNDIS_MSG_KEEPALIVE_C;
+ msg->msg_len = ccpu2(sizeof *msg);
+ msg->status = RNDIS_STATUS_SUCCESS;
+ retval = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SEND_ENCAPSULATED_COMMAND,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, info->u->bMasterInterface0,
+ msg, sizeof *msg,
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (unlikely(retval < 0))
+ dev_dbg(&info->control->dev,
+ "rndis keepalive err %d\n",
+ retval);
+ }
+ break;
+ default:
+ dev_dbg(&info->control->dev,
+ "unexpected rndis msg %08x len %d\n",
+ le32_to_cpu(buf->msg_type), msg_len);
+ }
+ } else {
+ /* device probably issued a protocol stall; ignore */
+ dev_dbg(&info->control->dev,
+ "rndis response error, code %d\n", retval);
+ }
+ msleep(2);
+ }
+ dev_dbg(&info->control->dev, "rndis response timeout\n");
+ return -ETIMEDOUT;
+}
+
+static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int retval;
+ struct net_device *net = dev->net;
+ union {
+ void *buf;
+ struct rndis_msg_hdr *header;
+ struct rndis_init *init;
+ struct rndis_init_c *init_c;
+ struct rndis_query *get;
+ struct rndis_query_c *get_c;
+ struct rndis_set *set;
+ struct rndis_set_c *set_c;
+ } u;
+ u32 tmp;
+
+ /* we can't rely on i/o from stack working, or stack allocation */
+ u.buf = kmalloc(1024, GFP_KERNEL);
+ if (!u.buf)
+ return -ENOMEM;
+ retval = usbnet_generic_cdc_bind(dev, intf);
+ if (retval < 0)
+ goto done;
+
+ net->hard_header_len += sizeof (struct rndis_data_hdr);
+
+ /* initialize; max transfer is 16KB at full speed */
+ u.init->msg_type = RNDIS_MSG_INIT;
+ u.init->msg_len = ccpu2(sizeof *u.init);
+ u.init->major_version = ccpu2(1);
+ u.init->minor_version = ccpu2(0);
+ u.init->max_transfer_size = ccpu2(net->mtu + net->hard_header_len);
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ /* it might not even be an RNDIS device!! */
+ dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
+fail:
+ usb_driver_release_interface(driver_of(intf),
+ ((struct cdc_state *)&(dev->data))->data);
+ goto done;
+ }
+ dev->hard_mtu = le32_to_cpu(u.init_c->max_transfer_size);
+ /* REVISIT: peripheral "alignment" request is ignored ... */
+ dev_dbg(&intf->dev, "hard mtu %u, align %d\n", dev->hard_mtu,
+ 1 << le32_to_cpu(u.init_c->packet_alignment));
+
+ /* get designated host ethernet address */
+ memset(u.get, 0, sizeof *u.get);
+ u.get->msg_type = RNDIS_MSG_QUERY;
+ u.get->msg_len = ccpu2(sizeof *u.get);
+ u.get->oid = OID_802_3_PERMANENT_ADDRESS;
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
+ goto fail;
+ }
+ tmp = le32_to_cpu(u.get_c->offset);
+ if (unlikely((tmp + 8) > (1024 - ETH_ALEN)
+ || u.get_c->len != ccpu2(ETH_ALEN))) {
+ dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
+ tmp, le32_to_cpu(u.get_c->len));
+ retval = -EDOM;
+ goto fail;
+ }
+ memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
+
+ /* set a nonzero filter to enable data transfers */
+ memset(u.set, 0, sizeof *u.set);
+ u.set->msg_type = RNDIS_MSG_SET;
+ u.set->msg_len = ccpu2(4 + sizeof *u.set);
+ u.set->oid = OID_GEN_CURRENT_PACKET_FILTER;
+ u.set->len = ccpu2(4);
+ u.set->offset = ccpu2((sizeof *u.set) - 8);
+ *(__le32 *)(u.buf + sizeof *u.set) = ccpu2(DEFAULT_FILTER);
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
+ goto fail;
+ }
+
+ retval = 0;
+done:
+ kfree(u.buf);
+ return retval;
+}
+
+static void rndis_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct rndis_halt *halt;
+
+ /* try to clear any rndis state/activity (no i/o from stack!) */
+ halt = kcalloc(1, sizeof *halt, SLAB_KERNEL);
+ if (halt) {
+ halt->msg_type = RNDIS_MSG_HALT;
+ halt->msg_len = ccpu2(sizeof *halt);
+ (void) rndis_command(dev, (void *)halt);
+ kfree(halt);
+ }
+
+ return usbnet_cdc_unbind(dev, intf);
+}
+
+/*
+ * DATA -- host must not write zlps
+ */
+static int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /* peripheral may have batched packets to us... */
+ while (likely(skb->len)) {
+ struct rndis_data_hdr *hdr = (void *)skb->data;
+ struct sk_buff *skb2;
+ u32 msg_len, data_offset, data_len;
+
+ msg_len = le32_to_cpu(hdr->msg_len);
+ data_offset = le32_to_cpu(hdr->data_offset);
+ data_len = le32_to_cpu(hdr->data_len);
+
+ /* don't choke if we see oob, per-packet data, etc */
+ if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
+ || skb->len < msg_len
+ || (data_offset + data_len + 8) > msg_len)) {
+ dev->stats.rx_frame_errors++;
+ devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
+ le32_to_cpu(hdr->msg_type),
+ msg_len, data_offset, data_len, skb->len);
+ return 0;
+ }
+ skb_pull(skb, 8 + data_offset);
+
+ /* at most one packet left? */
+ if (likely((data_len - skb->len) <= sizeof *hdr)) {
+ skb_trim(skb, data_len);
+ break;
+ }
+
+ /* try to return all the packets in the batch */
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ break;
+ skb_pull(skb, msg_len - sizeof *hdr);
+ skb_trim(skb2, data_len);
+ usbnet_skb_return(dev, skb2);
+ }
+
+ /* caller will usbnet_skb_return the remaining packet */
+ return 1;
+}
+
+static struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+{
+ struct rndis_data_hdr *hdr;
+ struct sk_buff *skb2;
+ unsigned len = skb->len;
+
+ if (likely(!skb_cloned(skb))) {
+ int room = skb_headroom(skb);
+
+ /* enough head room as-is? */
+ if (unlikely((sizeof *hdr) <= room))
+ goto fill;
+
+ /* enough room, but needs to be readjusted? */
+ room += skb_tailroom(skb);
+ if (likely((sizeof *hdr) <= room)) {
+ skb->data = memmove(skb->head + sizeof *hdr,
+ skb->data, len);
+ skb->tail = skb->data + len;
+ goto fill;
+ }
+ }
+
+ /* create a new skb, with the correct size (and tailpad) */
+ skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags);
+ dev_kfree_skb_any(skb);
+ if (unlikely(!skb2))
+ return skb2;
+ skb = skb2;
+
+ /* fill out the RNDIS header. we won't bother trying to batch
+ * packets; Linux minimizes wasted bandwidth through tx queues.
+ */
+fill:
+ hdr = (void *) __skb_push(skb, sizeof *hdr);
+ memset(hdr, 0, sizeof *hdr);
+ hdr->msg_type = RNDIS_MSG_PACKET;
+ hdr->msg_len = cpu_to_le32(skb->len);
+ hdr->data_offset = ccpu2(sizeof(*hdr) - 8);
+ hdr->data_len = cpu_to_le32(len);
+
+ /* FIXME make the last packet always be short ... */
+ return skb;
+}
+
+
+static const struct driver_info rndis_info = {
+ .description = "RNDIS device",
+ .flags = FLAG_ETHER | FLAG_FRAMING_RN,
+ .bind = rndis_bind,
+ .unbind = rndis_unbind,
+ .status = rndis_status,
+ .rx_fixup = rndis_rx_fixup,
+ .tx_fixup = rndis_tx_fixup,
+};
+
+#undef ccpu2
+
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products [] = {
+{
+ /* RNDIS is MSFT's un-official variant of CDC ACM */
+ USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+ .driver_info = (unsigned long) &rndis_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver rndis_driver = {
+ .owner = THIS_MODULE,
+ .name = "rndis_host",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init rndis_init(void)
+{
+ return usb_register(&rndis_driver);
+}
+module_init(rndis_init);
+
+static void __exit rndis_exit(void)
+{
+ usb_deregister(&rndis_driver);
+}
+module_exit(rndis_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB Host side RNDIS driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index 59ab40ebb39..c3d4e3589e3 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -653,7 +653,6 @@ static void rtl8150_tx_timeout(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
warn("%s: Tx timeout.", netdev->name);
- dev->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(dev->tx_urb);
dev->stats.tx_errors++;
}
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index a2f67245f6d..6c460918d54 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1,10 +1,7 @@
/*
- * USB Networking Links
- * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
- * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
+ * USB Network driver infrastructure
+ * Copyright (C) 2000-2005 by David Brownell
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
- * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
- * Copyright (c) 2002-2003 TiVo Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,95 +20,15 @@
/*
* This is a generic "USB networking" framework that works with several
- * kinds of full and high speed networking devices:
- *
- * + USB host-to-host "network cables", used for IP-over-USB links.
- * These are often used for Laplink style connectivity products.
- * - AnchorChip 2720
- * - Belkin, eTEK (interops with Win32 drivers)
- * - GeneSys GL620USB-A
- * - NetChip 1080 (interoperates with NetChip Win32 drivers)
- * - Prolific PL-2301/2302 (replaces "plusb" driver)
- * - KC Technology KC2190
- *
- * + Smart USB devices can support such links directly, using Internet
- * standard protocols instead of proprietary host-to-device links.
- * - Linux PDAs like iPaq, Yopy, and Zaurus
- * - The BLOB boot loader (for diskless booting)
- * - Linux "gadgets", perhaps using PXA-2xx or Net2280 controllers
- * - Devices using EPSON's sample USB firmware
- * - CDC-Ethernet class devices, such as many cable modems
- *
- * + Adapters to networks such as Ethernet.
- * - AX8817X based USB 2.0 products
- *
- * Links to these devices can be bridged using Linux Ethernet bridging.
- * With minor exceptions, these all use similar USB framing for network
- * traffic, but need different protocols for control traffic.
- *
- * USB devices can implement their side of this protocol at the cost
- * of two bulk endpoints; it's not restricted to "cable" applications.
- * See the SA1110, Zaurus, or EPSON device/client support in this driver;
- * slave/target drivers such as "usb-eth" (on most SA-1100 PDAs) or
- * "g_ether" (in the Linux "gadget" framework) implement that behavior
- * within devices.
- *
- *
- * CHANGELOG:
- *
- * 13-sep-2000 experimental, new
- * 10-oct-2000 usb_device_id table created.
- * 28-oct-2000 misc fixes; mostly, discard more TTL-mangled rx packets.
- * 01-nov-2000 usb_device_id table and probing api update by
- * Adam J. Richter <adam@yggdrasil.com>.
- * 18-dec-2000 (db) tx watchdog, "net1080" renaming to "usbnet", device_info
- * and prolific support, isolate net1080-specific bits, cleanup.
- * fix unlink_urbs oops in D3 PM resume code path.
- *
- * 02-feb-2001 (db) fix tx skb sharing, packet length, match_flags, ...
- * 08-feb-2001 stubbed in "linuxdev", maybe the SA-1100 folk can use it;
- * AnchorChips 2720 support (from spec) for testing;
- * fix bit-ordering problem with ethernet multicast addr
- * 19-feb-2001 Support for clearing halt conditions. SA1100 UDC support
- * updates. Oleg Drokin (green@iXcelerator.com)
- * 25-mar-2001 More SA-1100 updates, including workaround for ip problem
- * expecting cleared skb->cb and framing change to match latest
- * handhelds.org version (Oleg). Enable device IDs from the
- * Win32 Belkin driver; other cleanups (db).
- * 16-jul-2001 Bugfixes for uhci oops-on-unplug, Belkin support, various
- * cleanups for problems not yet seen in the field. (db)
- * 17-oct-2001 Handle "Advance USBNET" product, like Belkin/eTEK devices,
- * from Ioannis Mavroukakis <i.mavroukakis@btinternet.com>;
- * rx unlinks somehow weren't async; minor cleanup.
- * 03-nov-2001 Merged GeneSys driver; original code from Jiun-Jie Huang
- * <huangjj@genesyslogic.com.tw>, updated by Stanislav Brabec
- * <utx@penguin.cz>. Made framing options (NetChip/GeneSys)
- * tie mostly to (sub)driver info. Workaround some PL-2302
- * chips that seem to reject SET_INTERFACE requests.
- *
- * 06-apr-2002 Added ethtool support, based on a patch from Brad Hards.
- * Level of diagnostics is more configurable; they use device
- * location (usb_device->devpath) instead of address (2.5).
- * For tx_fixup, memflags can't be NOIO.
- * 07-may-2002 Generalize/cleanup keventd support, handling rx stalls (mostly
- * for USB 2.0 TTs) and memory shortages (potential) too. (db)
- * Use "locally assigned" IEEE802 address space. (Brad Hards)
- * 18-oct-2002 Support for Zaurus (Pavel Machek), related cleanup (db).
- * 14-dec-2002 Remove Zaurus-private crc32 code (Pavel); 2.5 oops fix,
- * cleanups and stubbed PXA-250 support (db), fix for framing
- * issues on Z, net1080, and gl620a (Toby Milne)
- *
- * 31-mar-2003 Use endpoint descriptors: high speed support, simpler sa1100
- * vs pxa25x, and CDC Ethernet. Throttle down log floods on
- * disconnect; other cleanups. (db) Flush net1080 fifos
- * after several sequential framing errors. (Johannes Erdfelt)
- * 22-aug-2003 AX8817X support (Dave Hollis).
- * 14-jun-2004 Trivial patch for AX8817X based Buffalo LUA-U2-KTX in Japan
- * (Neil Bortnak)
- * 03-nov-2004 Trivial patch for KC2190 (KC-190) chip. (Jonathan McDowell)
- *
- * 01-feb-2005 AX88772 support (Phil Chang & Dave Hollis)
- *-------------------------------------------------------------------------*/
+ * kinds of full and high speed networking devices: host-to-host cables,
+ * smart usb peripherals, and actual Ethernet adapters.
+ *
+ * These devices usually differ in terms of control protocols (if they
+ * even have one!) and sometimes they define new framing to wrap or batch
+ * Ethernet packets. Otherwise, they talk to USB pretty much the same,
+ * so interface (un)binding, endpoint I/O queues, fault handling, and other
+ * issues can usefully be addressed by this framework.
+ */
// #define DEBUG // error path messages, extra info
// #define VERBOSE // more; success messages
@@ -121,24 +38,18 @@
# define DEBUG
#endif
#include <linux/module.h>
-#include <linux/kmod.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/random.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
#include <linux/usb.h>
-#include <asm/io.h>
-#include <asm/scatterlist.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#define DRIVER_VERSION "03-Nov-2004"
+#include "usbnet.h"
+
+#define DRIVER_VERSION "22-Aug-2005"
/*-------------------------------------------------------------------------*/
@@ -149,15 +60,14 @@
* One maximum size Ethernet packet takes twenty four of them.
* For high speed, each frame comfortably fits almost 36 max size
* Ethernet packets (so queues should be bigger).
+ *
+ * REVISIT qlens should be members of 'struct usbnet'; the goal is to
+ * let the USB host controller be busy for 5msec or more before an irq
+ * is required, under load. Jumbograms change the equation.
*/
#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
-// packets are always ethernet inside
-// ... except they can be bigger (limit of 64K with NetChip framing)
-#define MIN_PACKET sizeof(struct ethhdr)
-#define MAX_PACKET 32768
-
// reawaken network queue this soon after stopping; else watchdog barks
#define TX_TIMEOUT_JIFFIES (5*HZ)
@@ -165,9 +75,6 @@
// us (it polls at HZ/4 usually) before we report too many false errors.
#define THROTTLE_JIFFIES (HZ/8)
-// for vendor-specific control operations
-#define CONTROL_TIMEOUT_MS 500
-
// between wakeups
#define UNLINK_TIMEOUT_MS 3
@@ -176,109 +83,6 @@
// randomly generated ethernet address
static u8 node_id [ETH_ALEN];
-// state we keep for each device we handle
-struct usbnet {
- // housekeeping
- struct usb_device *udev;
- struct driver_info *driver_info;
- wait_queue_head_t *wait;
-
- // i/o info: pipes etc
- unsigned in, out;
- struct usb_host_endpoint *status;
- unsigned maxpacket;
- struct timer_list delay;
-
- // protocol/interface state
- struct net_device *net;
- struct net_device_stats stats;
- int msg_enable;
- unsigned long data [5];
-
- struct mii_if_info mii;
-
- // various kinds of pending driver work
- struct sk_buff_head rxq;
- struct sk_buff_head txq;
- struct sk_buff_head done;
- struct urb *interrupt;
- struct tasklet_struct bh;
-
- struct work_struct kevent;
- unsigned long flags;
-# define EVENT_TX_HALT 0
-# define EVENT_RX_HALT 1
-# define EVENT_RX_MEMORY 2
-# define EVENT_STS_SPLIT 3
-# define EVENT_LINK_RESET 4
-};
-
-// device-specific info used by the driver
-struct driver_info {
- char *description;
-
- int flags;
-/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
-#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */
-#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */
-#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */
-#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */
-
-#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */
-#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */
-
-#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
-
- /* init device ... can sleep, or cause probe() failure */
- int (*bind)(struct usbnet *, struct usb_interface *);
-
- /* cleanup device ... can sleep, but can't fail */
- void (*unbind)(struct usbnet *, struct usb_interface *);
-
- /* reset device ... can sleep */
- int (*reset)(struct usbnet *);
-
- /* see if peer is connected ... can sleep */
- int (*check_connect)(struct usbnet *);
-
- /* for status polling */
- void (*status)(struct usbnet *, struct urb *);
-
- /* link reset handling, called from defer_kevent */
- int (*link_reset)(struct usbnet *);
-
- /* fixup rx packet (strip framing) */
- int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
-
- /* fixup tx packet (add framing) */
- struct sk_buff *(*tx_fixup)(struct usbnet *dev,
- struct sk_buff *skb, int flags);
-
- // FIXME -- also an interrupt mechanism
- // useful for at least PL2301/2302 and GL620USB-A
- // and CDC use them to report 'is it connected' changes
-
- /* for new devices, use the descriptor-reading code instead */
- int in; /* rx endpoint */
- int out; /* tx endpoint */
-
- unsigned long data; /* Misc driver specific data */
-};
-
-// we record the state for each of our queued skbs
-enum skb_state {
- illegal = 0,
- tx_start, tx_done,
- rx_start, rx_done, rx_cleanup
-};
-
-struct skb_data { // skb->cb is one of these
- struct urb *urb;
- struct usbnet *dev;
- enum skb_state state;
- size_t length;
-};
-
static const char driver_name [] = "usbnet";
/* use ethtool to change the level for any given device */
@@ -286,39 +90,10 @@ static int msg_level = -1;
module_param (msg_level, int, 0);
MODULE_PARM_DESC (msg_level, "Override default message level");
-
-#ifdef DEBUG
-#define devdbg(usbnet, fmt, arg...) \
- printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-#else
-#define devdbg(usbnet, fmt, arg...) do {} while(0)
-#endif
-
-#define deverr(usbnet, fmt, arg...) \
- printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-#define devwarn(usbnet, fmt, arg...) \
- printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-
-#define devinfo(usbnet, fmt, arg...) \
- printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
-
/*-------------------------------------------------------------------------*/
-static void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
-static u32 usbnet_get_link (struct net_device *);
-static u32 usbnet_get_msglevel (struct net_device *);
-static void usbnet_set_msglevel (struct net_device *, u32);
-static void defer_kevent (struct usbnet *, int);
-
-/* mostly for PDA style devices, which are always connected if present */
-static int always_connected (struct usbnet *dev)
-{
- return 0;
-}
-
/* handles CDC Ethernet and many other network "bulk data" interfaces */
-static int
-get_endpoints (struct usbnet *dev, struct usb_interface *intf)
+int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
{
int tmp;
struct usb_host_interface *alt = NULL;
@@ -382,6 +157,7 @@ get_endpoints (struct usbnet *dev, struct usb_interface *intf)
dev->status = status;
return 0;
}
+EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
static void intr_complete (struct urb *urb, struct pt_regs *regs);
@@ -421,7 +197,11 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf)
return 0;
}
-static void skb_return (struct usbnet *dev, struct sk_buff *skb)
+/* Passes this packet up the stack, updating its accounting.
+ * Some link protocols batch packets, so their rx_fixup paths
+ * can return clones as well as just modify the original skb.
+ */
+void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
{
int status;
@@ -438,2425 +218,7 @@ static void skb_return (struct usbnet *dev, struct sk_buff *skb)
if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
devdbg (dev, "netif_rx status %d", status);
}
-
-
-#ifdef CONFIG_USB_ALI_M5632
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * ALi M5632 driver ... does high speed
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info ali_m5632_info = {
- .description = "ALi M5632",
-};
-
-
-#endif
-
-
-#ifdef CONFIG_USB_AN2720
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * AnchorChips 2720 driver ... http://www.cypress.com
- *
- * This doesn't seem to have a way to detect whether the peer is
- * connected, or need any reset handshaking. It's got pretty big
- * internal buffers (handles most of a frame's worth of data).
- * Chip data sheets don't describe any vendor control messages.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info an2720_info = {
- .description = "AnchorChips/Cypress 2720",
- // no reset available!
- // no check_connect available!
-
- .in = 2, .out = 2, // direction distinguishes these
-};
-
-#endif /* CONFIG_USB_AN2720 */
-
-
-#ifdef CONFIG_USB_AX8817X
-/* ASIX AX8817X based USB 2.0 Ethernet Devices */
-
-#define HAVE_HARDWARE
-#define NEED_MII
-
-#include <linux/crc32.h>
-
-#define AX_CMD_SET_SW_MII 0x06
-#define AX_CMD_READ_MII_REG 0x07
-#define AX_CMD_WRITE_MII_REG 0x08
-#define AX_CMD_SET_HW_MII 0x0a
-#define AX_CMD_READ_EEPROM 0x0b
-#define AX_CMD_WRITE_EEPROM 0x0c
-#define AX_CMD_WRITE_ENABLE 0x0d
-#define AX_CMD_WRITE_DISABLE 0x0e
-#define AX_CMD_WRITE_RX_CTL 0x10
-#define AX_CMD_READ_IPG012 0x11
-#define AX_CMD_WRITE_IPG0 0x12
-#define AX_CMD_WRITE_IPG1 0x13
-#define AX_CMD_WRITE_IPG2 0x14
-#define AX_CMD_WRITE_MULTI_FILTER 0x16
-#define AX_CMD_READ_NODE_ID 0x17
-#define AX_CMD_READ_PHY_ID 0x19
-#define AX_CMD_READ_MEDIUM_STATUS 0x1a
-#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
-#define AX_CMD_READ_MONITOR_MODE 0x1c
-#define AX_CMD_WRITE_MONITOR_MODE 0x1d
-#define AX_CMD_WRITE_GPIOS 0x1f
-#define AX_CMD_SW_RESET 0x20
-#define AX_CMD_SW_PHY_STATUS 0x21
-#define AX_CMD_SW_PHY_SELECT 0x22
-#define AX88772_CMD_READ_NODE_ID 0x13
-
-#define AX_MONITOR_MODE 0x01
-#define AX_MONITOR_LINK 0x02
-#define AX_MONITOR_MAGIC 0x04
-#define AX_MONITOR_HSFS 0x10
-
-/* AX88172 Medium Status Register values */
-#define AX_MEDIUM_FULL_DUPLEX 0x02
-#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
-#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
-
-#define AX_MCAST_FILTER_SIZE 8
-#define AX_MAX_MCAST 64
-
-#define AX_EEPROM_LEN 0x40
-
-#define AX_SWRESET_CLEAR 0x00
-#define AX_SWRESET_RR 0x01
-#define AX_SWRESET_RT 0x02
-#define AX_SWRESET_PRTE 0x04
-#define AX_SWRESET_PRL 0x08
-#define AX_SWRESET_BZ 0x10
-#define AX_SWRESET_IPRL 0x20
-#define AX_SWRESET_IPPD 0x40
-
-#define AX88772_IPG0_DEFAULT 0x15
-#define AX88772_IPG1_DEFAULT 0x0c
-#define AX88772_IPG2_DEFAULT 0x12
-
-#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
-#define AX88772_MEDIUM_RESERVED 0x0004
-#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
-#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
-#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
-#define AX88772_MEDIUM_RX_ENABLE 0x0100
-#define AX88772_MEDIUM_100MB 0x0200
-#define AX88772_MEDIUM_DEFAULT \
- (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
- AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
- AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
-
-#define AX_EEPROM_MAGIC 0xdeadbeef
-
-/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct ax8817x_data {
- u8 multi_filter[AX_MCAST_FILTER_SIZE];
-};
-
-struct ax88172_int_data {
- u16 res1;
- u8 link;
- u16 res2;
- u8 status;
- u16 res3;
-} __attribute__ ((packed));
-
-static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- return usb_control_msg(
- dev->udev,
- usb_rcvctrlpipe(dev->udev, 0),
- cmd,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- index,
- data,
- size,
- CONTROL_TIMEOUT_MS);
-}
-
-static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- return usb_control_msg(
- dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- cmd,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- index,
- data,
- size,
- CONTROL_TIMEOUT_MS);
-}
-
-static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
-{
- struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
-
- if (urb->status < 0)
- printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
- urb->status);
-
- kfree(req);
- usb_free_urb(urb);
-}
-
-static void ax8817x_status(struct usbnet *dev, struct urb *urb)
-{
- struct ax88172_int_data *event;
- int link;
-
- if (urb->actual_length < 8)
- return;
-
- event = urb->transfer_buffer;
- link = event->link & 0x01;
- if (netif_carrier_ok(dev->net) != link) {
- if (link) {
- netif_carrier_on(dev->net);
- defer_kevent (dev, EVENT_LINK_RESET );
- } else
- netif_carrier_off(dev->net);
- devdbg(dev, "ax8817x - Link Status is: %d", link);
- }
-}
-
-static void ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- struct usb_ctrlrequest *req;
- int status;
- struct urb *urb;
-
- if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
- devdbg(dev, "Error allocating URB in write_cmd_async!");
- return;
- }
-
- if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
- deverr(dev, "Failed to allocate memory for control request");
- usb_free_urb(urb);
- return;
- }
-
- req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- req->bRequest = cmd;
- req->wValue = cpu_to_le16(value);
- req->wIndex = cpu_to_le16(index);
- req->wLength = cpu_to_le16(size);
-
- usb_fill_control_urb(urb, dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- (void *)req, data, size,
- ax8817x_async_cmd_callback, req);
-
- if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- deverr(dev, "Error submitting the control message: status=%d", status);
- kfree(req);
- usb_free_urb(urb);
- }
-}
-
-static void ax8817x_set_multicast(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
- struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
- u8 rx_ctl = 0x8c;
-
- if (net->flags & IFF_PROMISC) {
- rx_ctl |= 0x01;
- } else if (net->flags & IFF_ALLMULTI
- || net->mc_count > AX_MAX_MCAST) {
- rx_ctl |= 0x02;
- } else if (net->mc_count == 0) {
- /* just broadcast and directed */
- } else {
- /* We use the 20 byte dev->data
- * for our 8 byte filter buffer
- * to avoid allocating memory that
- * is tricky to free later */
- struct dev_mc_list *mc_list = net->mc_list;
- u32 crc_bits;
- int i;
-
- memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
-
- /* Build the multicast hash filter. */
- for (i = 0; i < net->mc_count; i++) {
- crc_bits =
- ether_crc(ETH_ALEN,
- mc_list->dmi_addr) >> 26;
- data->multi_filter[crc_bits >> 3] |=
- 1 << (crc_bits & 7);
- mc_list = mc_list->next;
- }
-
- ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
- AX_MCAST_FILTER_SIZE, data->multi_filter);
-
- rx_ctl |= 0x10;
- }
-
- ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
-}
-
-static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
-{
- struct usbnet *dev = netdev_priv(netdev);
- u16 res;
- u8 buf[1];
-
- ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
- ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res);
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
-
- return res & 0xffff;
-}
-
-static void ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
-{
- struct usbnet *dev = netdev_priv(netdev);
- u16 res = val;
- u8 buf[1];
-
- ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res);
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
-}
-
-static int ax88172_link_reset(struct usbnet *dev)
-{
- u16 lpa;
- u8 mode;
-
- mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
- lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA);
- if (lpa & LPA_DUPLEX)
- mode |= AX_MEDIUM_FULL_DUPLEX;
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-
- return 0;
-}
-
-static void ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
- struct usbnet *dev = netdev_priv(net);
- u8 opt;
-
- if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
- wolinfo->supported = 0;
- wolinfo->wolopts = 0;
- return;
- }
- wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
- wolinfo->wolopts = 0;
- if (opt & AX_MONITOR_MODE) {
- if (opt & AX_MONITOR_LINK)
- wolinfo->wolopts |= WAKE_PHY;
- if (opt & AX_MONITOR_MAGIC)
- wolinfo->wolopts |= WAKE_MAGIC;
- }
-}
-
-static int ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
- struct usbnet *dev = netdev_priv(net);
- u8 opt = 0;
- u8 buf[1];
-
- if (wolinfo->wolopts & WAKE_PHY)
- opt |= AX_MONITOR_LINK;
- if (wolinfo->wolopts & WAKE_MAGIC)
- opt |= AX_MONITOR_MAGIC;
- if (opt != 0)
- opt |= AX_MONITOR_MODE;
-
- if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
- opt, 0, 0, &buf) < 0)
- return -EINVAL;
-
- return 0;
-}
-
-static int ax8817x_get_eeprom_len(struct net_device *net)
-{
- return AX_EEPROM_LEN;
-}
-
-static int ax8817x_get_eeprom(struct net_device *net,
- struct ethtool_eeprom *eeprom, u8 *data)
-{
- struct usbnet *dev = netdev_priv(net);
- u16 *ebuf = (u16 *)data;
- int i;
-
- /* Crude hack to ensure that we don't overwrite memory
- * if an odd length is supplied
- */
- if (eeprom->len % 2)
- return -EINVAL;
-
- eeprom->magic = AX_EEPROM_MAGIC;
-
- /* ax8817x returns 2 bytes from eeprom on read */
- for (i=0; i < eeprom->len / 2; i++) {
- if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
- eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
- return -EINVAL;
- }
- return 0;
-}
-
-static void ax8817x_get_drvinfo (struct net_device *net,
- struct ethtool_drvinfo *info)
-{
- /* Inherit standard device info */
- usbnet_get_drvinfo(net, info);
- info->eedump_len = 0x3e;
-}
-
-static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
-{
- struct usbnet *dev = netdev_priv(net);
-
- return mii_ethtool_gset(&dev->mii,cmd);
-}
-
-static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
-{
- struct usbnet *dev = netdev_priv(net);
-
- return mii_ethtool_sset(&dev->mii,cmd);
-}
-
-/* We need to override some ethtool_ops so we require our
- own structure so we don't interfere with other usbnet
- devices that may be connected at the same time. */
-static struct ethtool_ops ax8817x_ethtool_ops = {
- .get_drvinfo = ax8817x_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_msglevel = usbnet_get_msglevel,
- .set_msglevel = usbnet_set_msglevel,
- .get_wol = ax8817x_get_wol,
- .set_wol = ax8817x_set_wol,
- .get_eeprom_len = ax8817x_get_eeprom_len,
- .get_eeprom = ax8817x_get_eeprom,
- .get_settings = ax8817x_get_settings,
- .set_settings = ax8817x_set_settings,
-};
-
-static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
-{
- int ret = 0;
- void *buf;
- int i;
- unsigned long gpio_bits = dev->driver_info->data;
-
- get_endpoints(dev,intf);
-
- buf = kmalloc(ETH_ALEN, GFP_KERNEL);
- if(!buf) {
- ret = -ENOMEM;
- goto out1;
- }
-
- /* Toggle the GPIOs in a manufacturer/model specific way */
- for (i = 2; i >= 0; i--) {
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
- (gpio_bits >> (i * 8)) & 0xff, 0, 0,
- buf)) < 0)
- goto out2;
- msleep(5);
- }
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf)) < 0) {
- dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
- goto out2;
- }
-
- /* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, 6, buf)) < 0) {
- dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
- goto out2;
- }
- memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
- /* Get the PHY id */
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
- dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
- goto out2;
- } else if (ret < 2) {
- /* this should always return 2 bytes */
- dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", ret);
- ret = -EIO;
- goto out2;
- }
-
- /* Initialize MII structure */
- dev->mii.dev = dev->net;
- dev->mii.mdio_read = ax8817x_mdio_read;
- dev->mii.mdio_write = ax8817x_mdio_write;
- dev->mii.phy_id_mask = 0x3f;
- dev->mii.reg_num_mask = 0x1f;
- dev->mii.phy_id = *((u8 *)buf + 1);
-
- dev->net->set_multicast_list = ax8817x_set_multicast;
- dev->net->ethtool_ops = &ax8817x_ethtool_ops;
-
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
- mii_nway_restart(&dev->mii);
-
- return 0;
-out2:
- kfree(buf);
-out1:
- return ret;
-}
-
-static struct ethtool_ops ax88772_ethtool_ops = {
- .get_drvinfo = ax8817x_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_msglevel = usbnet_get_msglevel,
- .set_msglevel = usbnet_set_msglevel,
- .get_wol = ax8817x_get_wol,
- .set_wol = ax8817x_set_wol,
- .get_eeprom_len = ax8817x_get_eeprom_len,
- .get_eeprom = ax8817x_get_eeprom,
- .get_settings = ax8817x_get_settings,
- .set_settings = ax8817x_set_settings,
-};
-
-static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
-{
- int ret;
- void *buf;
-
- get_endpoints(dev,intf);
-
- buf = kmalloc(6, GFP_KERNEL);
- if(!buf) {
- dbg ("Cannot allocate memory for buffer");
- ret = -ENOMEM;
- goto out1;
- }
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
- 0x00B0, 0, 0, buf)) < 0)
- goto out2;
-
- msleep(5);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0x0001, 0, 0, buf)) < 0) {
- dbg("Select PHY #1 failed: %d", ret);
- goto out2;
- }
-
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD, 0, 0, buf)) < 0) {
- dbg("Failed to power down internal PHY: %d", ret);
- goto out2;
- }
-
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR, 0, 0, buf)) < 0) {
- dbg("Failed to perform software reset: %d", ret);
- goto out2;
- }
-
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) {
- dbg("Failed to set Internal/External PHY reset control: %d", ret);
- goto out2;
- }
-
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0000, 0, 0,
- buf)) < 0) {
- dbg("Failed to reset RX_CTL: %d", ret);
- goto out2;
- }
-
- /* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
- if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)) < 0) {
- dbg("Failed to read MAC address: %d", ret);
- goto out2;
- }
- memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, buf)) < 0) {
- dbg("Enabling software MII failed: %d", ret);
- goto out2;
- }
-
- if (((ret =
- ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, 0x0010, 2, 2, buf)) < 0)
- || (*((u16 *)buf) != 0x003b)) {
- dbg("Read PHY register 2 must be 0x3b00: %d", ret);
- goto out2;
- }
-
- /* Initialize MII structure */
- dev->mii.dev = dev->net;
- dev->mii.mdio_read = ax8817x_mdio_read;
- dev->mii.mdio_write = ax8817x_mdio_write;
- dev->mii.phy_id_mask = 0xff;
- dev->mii.reg_num_mask = 0xff;
-
- /* Get the PHY id */
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
- dbg("Error reading PHY ID: %02x", ret);
- goto out2;
- } else if (ret < 2) {
- /* this should always return 2 bytes */
- dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
- ret);
- ret = -EIO;
- goto out2;
- }
- dev->mii.phy_id = *((u8 *)buf + 1);
-
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL, 0, 0, buf)) < 0) {
- dbg("Set external PHY reset pin level: %d", ret);
- goto out2;
- }
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) {
- dbg("Set Internal/External PHY reset control: %d", ret);
- goto out2;
- }
- msleep(150);
-
-
- dev->net->set_multicast_list = ax8817x_set_multicast;
- dev->net->ethtool_ops = &ax88772_ethtool_ops;
-
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_CSMA);
- mii_nway_restart(&dev->mii);
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
- dbg("Write medium mode register: %d", ret);
- goto out2;
- }
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
- dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
- goto out2;
- }
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
- dbg("Failed to set hardware MII: %02x", ret);
- goto out2;
- }
-
- /* Set RX_CTL to default values with 2k buffer, and enable cactus */
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
- buf)) < 0) {
- dbg("Reset RX_CTL failed: %d", ret);
- goto out2;
- }
-
- kfree(buf);
-
- return 0;
-
-out2:
- kfree(buf);
-out1:
- return ret;
-}
-
-static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
- u32 *header;
- char *packet;
- struct sk_buff *ax_skb;
- u16 size;
-
- header = (u32 *) skb->data;
- le32_to_cpus(header);
- packet = (char *)(header + 1);
-
- skb_pull(skb, 4);
-
- while (skb->len > 0) {
- if ((short)(*header & 0x0000ffff) !=
- ~((short)((*header & 0xffff0000) >> 16))) {
- devdbg(dev,"header length data is error");
- }
- /* get the packet length */
- size = (u16) (*header & 0x0000ffff);
-
- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
- return 2;
- if (size > ETH_FRAME_LEN) {
- devdbg(dev,"invalid rx length %d", size);
- return 0;
- }
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (ax_skb) {
- ax_skb->len = size;
- ax_skb->data = packet;
- ax_skb->tail = packet + size;
- skb_return(dev, ax_skb);
- } else {
- return 0;
- }
-
- skb_pull(skb, (size + 1) & 0xfffe);
-
- if (skb->len == 0)
- break;
-
- header = (u32 *) skb->data;
- le32_to_cpus(header);
- packet = (char *)(header + 1);
- skb_pull(skb, 4);
- }
-
- if (skb->len < 0) {
- devdbg(dev,"invalid rx length %d", skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
- int flags)
-{
- int padlen;
- int headroom = skb_headroom(skb);
- int tailroom = skb_tailroom(skb);
- u32 *packet_len;
- u32 *padbytes_ptr;
-
- padlen = ((skb->len + 4) % 512) ? 0 : 4;
-
- if ((!skb_cloned(skb))
- && ((headroom + tailroom) >= (4 + padlen))) {
- if ((headroom < 4) || (tailroom < padlen)) {
- skb->data = memmove(skb->head + 4, skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- }
- } else {
- struct sk_buff *skb2;
- skb2 = skb_copy_expand(skb, 4, padlen, flags);
- dev_kfree_skb_any(skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- packet_len = (u32 *) skb_push(skb, 4);
-
- packet_len = (u32 *) skb->data;
- *packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
-
- if ((skb->len % 512) == 0) {
- padbytes_ptr = (u32 *) skb->tail;
- *padbytes_ptr = 0xffff0000;
- skb_put(skb, padlen);
- }
- return skb;
-}
-
-static int ax88772_link_reset(struct usbnet *dev)
-{
- u16 lpa;
- u16 mode;
-
- mode = AX88772_MEDIUM_DEFAULT;
- lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA);
-
- if ((lpa & LPA_DUPLEX) == 0)
- mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
- if ((lpa & LPA_100) == 0)
- mode &= ~AX88772_MEDIUM_100MB;
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-
- return 0;
-}
-
-static const struct driver_info ax8817x_info = {
- .description = "ASIX AX8817x USB 2.0 Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x00130103,
-};
-
-static const struct driver_info dlink_dub_e100_info = {
- .description = "DLink DUB-E100 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x009f9d9f,
-};
-
-static const struct driver_info netgear_fa120_info = {
- .description = "Netgear FA-120 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x00130103,
-};
-
-static const struct driver_info hawking_uf200_info = {
- .description = "Hawking UF200 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x001f1d1f,
-};
-
-static const struct driver_info ax88772_info = {
- .description = "ASIX AX88772 USB 2.0 Ethernet",
- .bind = ax88772_bind,
- .status = ax8817x_status,
- .link_reset = ax88772_link_reset,
- .reset = ax88772_link_reset,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX,
- .rx_fixup = ax88772_rx_fixup,
- .tx_fixup = ax88772_tx_fixup,
- .data = 0x00130103,
-};
-
-#endif /* CONFIG_USB_AX8817X */
-
-
-
-#ifdef CONFIG_USB_BELKIN
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Belkin F5U104 ... two NetChip 2280 devices + Atmel microcontroller
- *
- * ... also two eTEK designs, including one sold as "Advance USBNET"
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info belkin_info = {
- .description = "Belkin, eTEK, or compatible",
-};
-
-#endif /* CONFIG_USB_BELKIN */
-
-
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class declarations.
- * Used by CDC Ethernet, and some CDC variants
- *
- *-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_CDCETHER
-#define NEED_GENERIC_CDC
-#endif
-
-#ifdef CONFIG_USB_ZAURUS
-/* Ethernet variant uses funky framing, broken ethernet addressing */
-#define NEED_GENERIC_CDC
-#endif
-
-#ifdef CONFIG_USB_RNDIS
-/* ACM variant uses even funkier framing, complex control RPC scheme */
-#define NEED_GENERIC_CDC
-#endif
-
-
-#ifdef NEED_GENERIC_CDC
-
-#include <linux/usb_cdc.h>
-
-struct cdc_state {
- struct usb_cdc_header_desc *header;
- struct usb_cdc_union_desc *u;
- struct usb_cdc_ether_desc *ether;
- struct usb_interface *control;
- struct usb_interface *data;
-};
-
-static struct usb_driver usbnet_driver;
-
-/*
- * probes control interface, claims data interface, collects the bulk
- * endpoints, activates data interface (if needed), maybe sets MTU.
- * all pure cdc, except for certain firmware workarounds.
- */
-static int generic_cdc_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- u8 *buf = intf->cur_altsetting->extra;
- int len = intf->cur_altsetting->extralen;
- struct usb_interface_descriptor *d;
- struct cdc_state *info = (void *) &dev->data;
- int status;
- int rndis;
-
- if (sizeof dev->data < sizeof *info)
- return -EDOM;
-
- /* expect strict spec conformance for the descriptors, but
- * cope with firmware which stores them in the wrong place
- */
- if (len == 0 && dev->udev->actconfig->extralen) {
- /* Motorola SB4100 (and others: Brad Hards says it's
- * from a Broadcom design) put CDC descriptors here
- */
- buf = dev->udev->actconfig->extra;
- len = dev->udev->actconfig->extralen;
- if (len)
- dev_dbg (&intf->dev,
- "CDC descriptors on config\n");
- }
-
- /* this assumes that if there's a non-RNDIS vendor variant
- * of cdc-acm, it'll fail RNDIS requests cleanly.
- */
- rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
-
- memset (info, 0, sizeof *info);
- info->control = intf;
- while (len > 3) {
- if (buf [1] != USB_DT_CS_INTERFACE)
- goto next_desc;
-
- /* use bDescriptorSubType to identify the CDC descriptors.
- * We expect devices with CDC header and union descriptors.
- * For CDC Ethernet we need the ethernet descriptor.
- * For RNDIS, ignore two (pointless) CDC modem descriptors
- * in favor of a complicated OID-based RPC scheme doing what
- * CDC Ethernet achieves with a simple descriptor.
- */
- switch (buf [2]) {
- case USB_CDC_HEADER_TYPE:
- if (info->header) {
- dev_dbg (&intf->dev, "extra CDC header\n");
- goto bad_desc;
- }
- info->header = (void *) buf;
- if (info->header->bLength != sizeof *info->header) {
- dev_dbg (&intf->dev, "CDC header len %u\n",
- info->header->bLength);
- goto bad_desc;
- }
- break;
- case USB_CDC_UNION_TYPE:
- if (info->u) {
- dev_dbg (&intf->dev, "extra CDC union\n");
- goto bad_desc;
- }
- info->u = (void *) buf;
- if (info->u->bLength != sizeof *info->u) {
- dev_dbg (&intf->dev, "CDC union len %u\n",
- info->u->bLength);
- goto bad_desc;
- }
-
- /* we need a master/control interface (what we're
- * probed with) and a slave/data interface; union
- * descriptors sort this all out.
- */
- info->control = usb_ifnum_to_if(dev->udev,
- info->u->bMasterInterface0);
- info->data = usb_ifnum_to_if(dev->udev,
- info->u->bSlaveInterface0);
- if (!info->control || !info->data) {
- dev_dbg (&intf->dev,
- "master #%u/%p slave #%u/%p\n",
- info->u->bMasterInterface0,
- info->control,
- info->u->bSlaveInterface0,
- info->data);
- goto bad_desc;
- }
- if (info->control != intf) {
- dev_dbg (&intf->dev, "bogus CDC Union\n");
- /* Ambit USB Cable Modem (and maybe others)
- * interchanges master and slave interface.
- */
- if (info->data == intf) {
- info->data = info->control;
- info->control = intf;
- } else
- goto bad_desc;
- }
-
- /* a data interface altsetting does the real i/o */
- d = &info->data->cur_altsetting->desc;
- if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
- dev_dbg (&intf->dev, "slave class %u\n",
- d->bInterfaceClass);
- goto bad_desc;
- }
- break;
- case USB_CDC_ETHERNET_TYPE:
- if (info->ether) {
- dev_dbg (&intf->dev, "extra CDC ether\n");
- goto bad_desc;
- }
- info->ether = (void *) buf;
- if (info->ether->bLength != sizeof *info->ether) {
- dev_dbg (&intf->dev, "CDC ether len %u\n",
- info->ether->bLength);
- goto bad_desc;
- }
- dev->net->mtu = le16_to_cpup (
- &info->ether->wMaxSegmentSize)
- - ETH_HLEN;
- /* because of Zaurus, we may be ignoring the host
- * side link address we were given.
- */
- break;
- }
-next_desc:
- len -= buf [0]; /* bLength */
- buf += buf [0];
- }
-
- if (!info->header || !info->u || (!rndis && !info->ether)) {
- dev_dbg (&intf->dev, "missing cdc %s%s%sdescriptor\n",
- info->header ? "" : "header ",
- info->u ? "" : "union ",
- info->ether ? "" : "ether ");
- goto bad_desc;
- }
-
- /* claim data interface and set it up ... with side effects.
- * network traffic can't flow until an altsetting is enabled.
- */
- status = usb_driver_claim_interface (&usbnet_driver, info->data, dev);
- if (status < 0)
- return status;
- status = get_endpoints (dev, info->data);
- if (status < 0) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return status;
- }
-
- /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
- dev->status = NULL;
- if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
- struct usb_endpoint_descriptor *desc;
-
- dev->status = &info->control->cur_altsetting->endpoint [0];
- desc = &dev->status->desc;
- if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
- || !(desc->bEndpointAddress & USB_DIR_IN)
- || (le16_to_cpu(desc->wMaxPacketSize)
- < sizeof (struct usb_cdc_notification))
- || !desc->bInterval) {
- dev_dbg (&intf->dev, "bad notification endpoint\n");
- dev->status = NULL;
- }
- }
- if (rndis && !dev->status) {
- dev_dbg (&intf->dev, "missing RNDIS status endpoint\n");
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return -ENODEV;
- }
- return 0;
-
-bad_desc:
- dev_info (&dev->udev->dev, "bad CDC descriptors\n");
- return -ENODEV;
-}
-
-static void cdc_unbind (struct usbnet *dev, struct usb_interface *intf)
-{
- struct cdc_state *info = (void *) &dev->data;
-
- /* disconnect master --> disconnect slave */
- if (intf == info->control && info->data) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- info->data = NULL;
- }
-
- /* and vice versa (just in case) */
- else if (intf == info->data && info->control) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->control, NULL);
- usb_driver_release_interface (&usbnet_driver, info->control);
- info->control = NULL;
- }
-}
-
-#endif /* NEED_GENERIC_CDC */
-
-
-#ifdef CONFIG_USB_CDCETHER
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class, Ethernet Control model
- *
- * Takes two interfaces. The DATA interface is inactive till an altsetting
- * is selected. Configuration data includes class descriptors.
- *
- * This should interop with whatever the 2.4 "CDCEther.c" driver
- * (by Brad Hards) talked with.
- *
- *-------------------------------------------------------------------------*/
-
-#include <linux/ctype.h>
-
-
-static void dumpspeed (struct usbnet *dev, __le32 *speeds)
-{
- if (netif_msg_timer (dev))
- devinfo (dev, "link speeds: %u kbps up, %u kbps down",
- __le32_to_cpu(speeds[0]) / 1000,
- __le32_to_cpu(speeds[1]) / 1000);
-}
-
-static void cdc_status (struct usbnet *dev, struct urb *urb)
-{
- struct usb_cdc_notification *event;
-
- if (urb->actual_length < sizeof *event)
- return;
-
- /* SPEED_CHANGE can get split into two 8-byte packets */
- if (test_and_clear_bit (EVENT_STS_SPLIT, &dev->flags)) {
- dumpspeed (dev, (__le32 *) urb->transfer_buffer);
- return;
- }
-
- event = urb->transfer_buffer;
- switch (event->bNotificationType) {
- case USB_CDC_NOTIFY_NETWORK_CONNECTION:
- if (netif_msg_timer (dev))
- devdbg (dev, "CDC: carrier %s",
- event->wValue ? "on" : "off");
- if (event->wValue)
- netif_carrier_on(dev->net);
- else
- netif_carrier_off(dev->net);
- break;
- case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
- if (netif_msg_timer (dev))
- devdbg (dev, "CDC: speed change (len %d)",
- urb->actual_length);
- if (urb->actual_length != (sizeof *event + 8))
- set_bit (EVENT_STS_SPLIT, &dev->flags);
- else
- dumpspeed (dev, (__le32 *) &event[1]);
- break;
- // case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: /* RNDIS; or unsolicited */
- default:
- deverr (dev, "CDC: unexpected notification %02x!",
- event->bNotificationType);
- break;
- }
-}
-
-static u8 nibble (unsigned char c)
-{
- if (likely (isdigit (c)))
- return c - '0';
- c = toupper (c);
- if (likely (isxdigit (c)))
- return 10 + c - 'A';
- return 0;
-}
-
-static inline int
-get_ethernet_addr (struct usbnet *dev, struct usb_cdc_ether_desc *e)
-{
- int tmp, i;
- unsigned char buf [13];
-
- tmp = usb_string (dev->udev, e->iMACAddress, buf, sizeof buf);
- if (tmp != 12) {
- dev_dbg (&dev->udev->dev,
- "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
- if (tmp >= 0)
- tmp = -EINVAL;
- return tmp;
- }
- for (i = tmp = 0; i < 6; i++, tmp += 2)
- dev->net->dev_addr [i] =
- (nibble (buf [tmp]) << 4) + nibble (buf [tmp + 1]);
- return 0;
-}
-
-static int cdc_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- int status;
- struct cdc_state *info = (void *) &dev->data;
-
- status = generic_cdc_bind (dev, intf);
- if (status < 0)
- return status;
-
- status = get_ethernet_addr (dev, info->ether);
- if (status < 0) {
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return status;
- }
-
- /* FIXME cdc-ether has some multicast code too, though it complains
- * in routine cases. info->ether describes the multicast support.
- */
- return 0;
-}
-
-static const struct driver_info cdc_info = {
- .description = "CDC Ethernet Device",
- .flags = FLAG_ETHER,
- // .check_connect = cdc_check_connect,
- .bind = cdc_bind,
- .unbind = cdc_unbind,
- .status = cdc_status,
-};
-
-#endif /* CONFIG_USB_CDCETHER */
-
-
-
-#ifdef CONFIG_USB_EPSON2888
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * EPSON USB clients
- *
- * This is the same idea as Linux PDAs (below) except the firmware in the
- * device might not be Tux-powered. Epson provides reference firmware that
- * implements this interface. Product developers can reuse or modify that
- * code, such as by using their own product and vendor codes.
- *
- * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info epson2888_info = {
- .description = "Epson USB Device",
- .check_connect = always_connected,
-
- .in = 4, .out = 3,
-};
-
-#endif /* CONFIG_USB_EPSON2888 */
-
-
-#ifdef CONFIG_USB_GENESYS
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * GeneSys GL620USB-A (www.genesyslogic.com.tw)
- *
- * ... should partially interop with the Win32 driver for this hardware
- * The GeneSys docs imply there's some NDIS issue motivating this framing.
- *
- * Some info from GeneSys:
- * - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
- * (Some cables, like the BAFO-100c, use the half duplex version.)
- * - For the full duplex model, the low bit of the version code says
- * which side is which ("left/right").
- * - For the half duplex type, a control/interrupt handshake settles
- * the transfer direction. (That's disabled here, partially coded.)
- * A control URB would block until other side writes an interrupt.
- *
- * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
- * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
- *
- *-------------------------------------------------------------------------*/
-
-// control msg write command
-#define GENELINK_CONNECT_WRITE 0xF0
-// interrupt pipe index
-#define GENELINK_INTERRUPT_PIPE 0x03
-// interrupt read buffer size
-#define INTERRUPT_BUFSIZE 0x08
-// interrupt pipe interval value
-#define GENELINK_INTERRUPT_INTERVAL 0x10
-// max transmit packet number per transmit
-#define GL_MAX_TRANSMIT_PACKETS 32
-// max packet length
-#define GL_MAX_PACKET_LEN 1514
-// max receive buffer size
-#define GL_RCV_BUF_SIZE \
- (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
-
-struct gl_packet {
- u32 packet_length;
- char packet_data [1];
-};
-
-struct gl_header {
- u32 packet_count;
- struct gl_packet packets;
-};
-
-#ifdef GENELINK_ACK
-
-// FIXME: this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly. interrupts should be generic
-// code like all other device I/O, anyway.
-
-struct gl_priv {
- struct urb *irq_urb;
- char irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write (struct usbnet *dev, u8 request, u16 value)
-{
- int retval;
-
- retval = usb_control_msg (dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- value,
- 0, // index
- 0, // data buffer
- 0, // size
- CONTROL_TIMEOUT_MS);
- return retval;
-}
-
-static void gl_interrupt_complete (struct urb *urb, struct pt_regs *regs)
-{
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- }
-
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-static int gl_interrupt_read (struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
- int retval;
-
- // issue usb interrupt read
- if (priv && priv->irq_urb) {
- // submit urb
- if ((retval = usb_submit_urb (priv->irq_urb, GFP_KERNEL)) != 0)
- dbg ("gl_interrupt_read: submit fail - %X...", retval);
- else
- dbg ("gl_interrupt_read: submit success...");
- }
-
- return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect (struct usbnet *dev)
-{
- int retval;
-
- dbg ("genelink_check_connect...");
-
- // detect whether another side is connected
- if ((retval = gl_control_write (dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
- dbg ("%s: genelink_check_connect write fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- // usb interrupt read to ack another side
- if ((retval = gl_interrupt_read (dev)) != 0) {
- dbg ("%s: genelink_check_connect read fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- dbg ("%s: genelink_check_connect read success", dev->net->name);
- return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init (struct usbnet *dev)
-{
- struct gl_priv *priv;
-
- // allocate the private data structure
- if ((priv = kmalloc (sizeof *priv, GFP_KERNEL)) == 0) {
- dbg ("%s: cannot allocate private data per device",
- dev->net->name);
- return -ENOMEM;
- }
-
- // allocate irq urb
- if ((priv->irq_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) {
- dbg ("%s: cannot allocate private irq urb per device",
- dev->net->name);
- kfree (priv);
- return -ENOMEM;
- }
-
- // fill irq urb
- usb_fill_int_urb (priv->irq_urb, dev->udev,
- usb_rcvintpipe (dev->udev, GENELINK_INTERRUPT_PIPE),
- priv->irq_buf, INTERRUPT_BUFSIZE,
- gl_interrupt_complete, 0,
- GENELINK_INTERRUPT_INTERVAL);
-
- // set private data pointer
- dev->priv_data = priv;
-
- return 0;
-}
-
-// release the private data
-static int genelink_free (struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
-
- if (!priv)
- return 0;
-
-// FIXME: can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
- // cancel irq urb first
- usb_kill_urb (priv->irq_urb);
-
- // free irq urb
- usb_free_urb (priv->irq_urb);
-
- // free the private data structure
- kfree (priv);
-
- return 0;
-}
-
-#endif
-
-static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
-{
- struct gl_header *header;
- struct gl_packet *packet;
- struct sk_buff *gl_skb;
- u32 size;
-
- header = (struct gl_header *) skb->data;
-
- // get the packet count of the received skb
- le32_to_cpus (&header->packet_count);
- if ((header->packet_count > GL_MAX_TRANSMIT_PACKETS)
- || (header->packet_count < 0)) {
- dbg ("genelink: invalid received packet count %d",
- header->packet_count);
- return 0;
- }
-
- // set the current packet pointer to the first packet
- packet = &header->packets;
-
- // decrement the length for the packet count size 4 bytes
- skb_pull (skb, 4);
-
- while (header->packet_count > 1) {
- // get the packet length
- size = packet->packet_length;
-
- // this may be a broken packet
- if (size > GL_MAX_PACKET_LEN) {
- dbg ("genelink: invalid rx length %d", size);
- return 0;
- }
-
- // allocate the skb for the individual packet
- gl_skb = alloc_skb (size, GFP_ATOMIC);
- if (gl_skb) {
-
- // copy the packet data to the new skb
- memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- skb_return (dev, gl_skb);
- }
-
- // advance to the next packet
- packet = (struct gl_packet *)
- &packet->packet_data [size];
- header->packet_count--;
-
- // shift the data pointer to the next gl_packet
- skb_pull (skb, size + 4);
- }
-
- // skip the packet length field 4 bytes
- skb_pull (skb, 4);
-
- if (skb->len > GL_MAX_PACKET_LEN) {
- dbg ("genelink: invalid rx length %d", skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *
-genelink_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags)
-{
- int padlen;
- int length = skb->len;
- int headroom = skb_headroom (skb);
- int tailroom = skb_tailroom (skb);
- u32 *packet_count;
- u32 *packet_len;
-
- // FIXME: magic numbers, bleech
- padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
-
- if ((!skb_cloned (skb))
- && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
- if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
- skb->data = memmove (skb->head + (4 + 4*1),
- skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- }
- } else {
- struct sk_buff *skb2;
- skb2 = skb_copy_expand (skb, (4 + 4*1) , padlen, flags);
- dev_kfree_skb_any (skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- // attach the packet count to the header
- packet_count = (u32 *) skb_push (skb, (4 + 4*1));
- packet_len = packet_count + 1;
-
- // FIXME little endian?
- *packet_count = 1;
- *packet_len = length;
-
- // add padding byte
- if ((skb->len % dev->maxpacket) == 0)
- skb_put (skb, 1);
-
- return skb;
-}
-
-static const struct driver_info genelink_info = {
- .description = "Genesys GeneLink",
- .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT,
- .rx_fixup = genelink_rx_fixup,
- .tx_fixup = genelink_tx_fixup,
-
- .in = 1, .out = 2,
-
-#ifdef GENELINK_ACK
- .check_connect =genelink_check_connect,
-#endif
-};
-
-#endif /* CONFIG_USB_GENESYS */
-
-
-
-#ifdef CONFIG_USB_NET1080
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Netchip 1080 driver ... http://www.netchip.com
- * Used in LapLink cables
- *
- *-------------------------------------------------------------------------*/
-
-#define dev_packet_id data[0]
-#define frame_errors data[1]
-
-/*
- * NetChip framing of ethernet packets, supporting additional error
- * checks for links that may drop bulk packets from inside messages.
- * Odd USB length == always short read for last usb packet.
- * - nc_header
- * - Ethernet header (14 bytes)
- * - payload
- * - (optional padding byte, if needed so length becomes odd)
- * - nc_trailer
- *
- * This framing is to be avoided for non-NetChip devices.
- */
-
-struct nc_header { // packed:
- __le16 hdr_len; // sizeof nc_header (LE, all)
- __le16 packet_len; // payload size (including ethhdr)
- __le16 packet_id; // detects dropped packets
-#define MIN_HEADER 6
-
- // all else is optional, and must start with:
- // u16 vendorId; // from usb-if
- // u16 productId;
-} __attribute__((__packed__));
-
-#define PAD_BYTE ((unsigned char)0xAC)
-
-struct nc_trailer {
- __le16 packet_id;
-} __attribute__((__packed__));
-
-// packets may use FLAG_FRAMING_NC and optional pad
-#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
- + sizeof (struct ethhdr) \
- + (mtu) \
- + 1 \
- + sizeof (struct nc_trailer))
-
-#define MIN_FRAMED FRAMED_SIZE(0)
-
-
-/*
- * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
- * before the hardware drops it. If that's done, the driver will need to
- * frame network packets to guard against the dropped USB packets. The win32
- * driver sets this for both sides of the link.
- */
-#define NC_READ_TTL_MS ((u8)255) // ms
-
-/*
- * We ignore most registers and EEPROM contents.
- */
-#define REG_USBCTL ((u8)0x04)
-#define REG_TTL ((u8)0x10)
-#define REG_STATUS ((u8)0x11)
-
-/*
- * Vendor specific requests to read/write data
- */
-#define REQUEST_REGISTER ((u8)0x10)
-#define REQUEST_EEPROM ((u8)0x11)
-
-static int
-nc_vendor_read (struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
-{
- int status = usb_control_msg (dev->udev,
- usb_rcvctrlpipe (dev->udev, 0),
- req,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, regnum,
- retval_ptr, sizeof *retval_ptr,
- CONTROL_TIMEOUT_MS);
- if (status > 0)
- status = 0;
- if (!status)
- le16_to_cpus (retval_ptr);
- return status;
-}
-
-static inline int
-nc_register_read (struct usbnet *dev, u8 regnum, u16 *retval_ptr)
-{
- return nc_vendor_read (dev, REQUEST_REGISTER, regnum, retval_ptr);
-}
-
-// no retval ... can become async, usable in_interrupt()
-static void
-nc_vendor_write (struct usbnet *dev, u8 req, u8 regnum, u16 value)
-{
- usb_control_msg (dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- req,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, regnum,
- NULL, 0, // data is in setup packet
- CONTROL_TIMEOUT_MS);
-}
-
-static inline void
-nc_register_write (struct usbnet *dev, u8 regnum, u16 value)
-{
- nc_vendor_write (dev, REQUEST_REGISTER, regnum, value);
-}
-
-
-#if 0
-static void nc_dump_registers (struct usbnet *dev)
-{
- u8 reg;
- u16 *vp = kmalloc (sizeof (u16));
-
- if (!vp) {
- dbg ("no memory?");
- return;
- }
-
- dbg ("%s registers:", dev->net->name);
- for (reg = 0; reg < 0x20; reg++) {
- int retval;
-
- // reading some registers is trouble
- if (reg >= 0x08 && reg <= 0xf)
- continue;
- if (reg >= 0x12 && reg <= 0x1e)
- continue;
-
- retval = nc_register_read (dev, reg, vp);
- if (retval < 0)
- dbg ("%s reg [0x%x] ==> error %d",
- dev->net->name, reg, retval);
- else
- dbg ("%s reg [0x%x] = 0x%x",
- dev->net->name, reg, *vp);
- }
- kfree (vp);
-}
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Control register
- */
-
-#define USBCTL_WRITABLE_MASK 0x1f0f
-// bits 15-13 reserved, r/o
-#define USBCTL_ENABLE_LANG (1 << 12)
-#define USBCTL_ENABLE_MFGR (1 << 11)
-#define USBCTL_ENABLE_PROD (1 << 10)
-#define USBCTL_ENABLE_SERIAL (1 << 9)
-#define USBCTL_ENABLE_DEFAULTS (1 << 8)
-// bits 7-4 reserved, r/o
-#define USBCTL_FLUSH_OTHER (1 << 3)
-#define USBCTL_FLUSH_THIS (1 << 2)
-#define USBCTL_DISCONN_OTHER (1 << 1)
-#define USBCTL_DISCONN_THIS (1 << 0)
-
-static inline void nc_dump_usbctl (struct usbnet *dev, u16 usbctl)
-{
- if (!netif_msg_link (dev))
- return;
- devdbg (dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
- " this%s%s;"
- " other%s%s; r/o 0x%x",
- dev->udev->bus->bus_name, dev->udev->devpath,
- usbctl,
- (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
- (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
- (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
- (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
- (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
-
- (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
- (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
- (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
- (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
- usbctl & ~USBCTL_WRITABLE_MASK
- );
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Status register
- */
-
-#define STATUS_PORT_A (1 << 15)
-
-#define STATUS_CONN_OTHER (1 << 14)
-#define STATUS_SUSPEND_OTHER (1 << 13)
-#define STATUS_MAILBOX_OTHER (1 << 12)
-#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03)
-
-#define STATUS_CONN_THIS (1 << 6)
-#define STATUS_SUSPEND_THIS (1 << 5)
-#define STATUS_MAILBOX_THIS (1 << 4)
-#define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03)
-
-#define STATUS_UNSPEC_MASK 0x0c8c
-#define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK))
-
-
-static inline void nc_dump_status (struct usbnet *dev, u16 status)
-{
- if (!netif_msg_link (dev))
- return;
- devdbg (dev, "net1080 %s-%s status 0x%x:"
- " this (%c) PKT=%d%s%s%s;"
- " other PKT=%d%s%s%s; unspec 0x%x",
- dev->udev->bus->bus_name, dev->udev->devpath,
- status,
-
- // XXX the packet counts don't seem right
- // (1 at reset, not 0); maybe UNSPEC too
-
- (status & STATUS_PORT_A) ? 'A' : 'B',
- STATUS_PACKETS_THIS (status),
- (status & STATUS_CONN_THIS) ? " CON" : "",
- (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
- (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
-
- STATUS_PACKETS_OTHER (status),
- (status & STATUS_CONN_OTHER) ? " CON" : "",
- (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
- (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
-
- status & STATUS_UNSPEC_MASK
- );
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * TTL register
- */
-
-#define TTL_THIS(ttl) (0x00ff & ttl)
-#define TTL_OTHER(ttl) (0x00ff & (ttl >> 8))
-#define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this))))
-
-static inline void nc_dump_ttl (struct usbnet *dev, u16 ttl)
-{
- if (netif_msg_link (dev))
- devdbg (dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
- dev->udev->bus->bus_name, dev->udev->devpath,
- ttl, TTL_THIS (ttl), TTL_OTHER (ttl));
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int net1080_reset (struct usbnet *dev)
-{
- u16 usbctl, status, ttl;
- u16 *vp = kmalloc (sizeof (u16), GFP_KERNEL);
- int retval;
-
- if (!vp)
- return -ENOMEM;
-
- // nc_dump_registers (dev);
-
- if ((retval = nc_register_read (dev, REG_STATUS, vp)) < 0) {
- dbg ("can't read %s-%s status: %d",
- dev->udev->bus->bus_name, dev->udev->devpath, retval);
- goto done;
- }
- status = *vp;
- nc_dump_status (dev, status);
-
- if ((retval = nc_register_read (dev, REG_USBCTL, vp)) < 0) {
- dbg ("can't read USBCTL, %d", retval);
- goto done;
- }
- usbctl = *vp;
- nc_dump_usbctl (dev, usbctl);
-
- nc_register_write (dev, REG_USBCTL,
- USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
-
- if ((retval = nc_register_read (dev, REG_TTL, vp)) < 0) {
- dbg ("can't read TTL, %d", retval);
- goto done;
- }
- ttl = *vp;
- // nc_dump_ttl (dev, ttl);
-
- nc_register_write (dev, REG_TTL,
- MK_TTL (NC_READ_TTL_MS, TTL_OTHER (ttl)) );
- dbg ("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
-
- if (netif_msg_link (dev))
- devinfo (dev, "port %c, peer %sconnected",
- (status & STATUS_PORT_A) ? 'A' : 'B',
- (status & STATUS_CONN_OTHER) ? "" : "dis"
- );
- retval = 0;
-
-done:
- kfree (vp);
- return retval;
-}
-
-static int net1080_check_connect (struct usbnet *dev)
-{
- int retval;
- u16 status;
- u16 *vp = kmalloc (sizeof (u16), GFP_KERNEL);
-
- if (!vp)
- return -ENOMEM;
- retval = nc_register_read (dev, REG_STATUS, vp);
- status = *vp;
- kfree (vp);
- if (retval != 0) {
- dbg ("%s net1080_check_conn read - %d", dev->net->name, retval);
- return retval;
- }
- if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
- return -ENOLINK;
- return 0;
-}
-
-static void nc_flush_complete (struct urb *urb, struct pt_regs *regs)
-{
- kfree (urb->context);
- usb_free_urb(urb);
-}
-
-static void nc_ensure_sync (struct usbnet *dev)
-{
- dev->frame_errors++;
- if (dev->frame_errors > 5) {
- struct urb *urb;
- struct usb_ctrlrequest *req;
- int status;
-
- /* Send a flush */
- urb = usb_alloc_urb (0, SLAB_ATOMIC);
- if (!urb)
- return;
-
- req = kmalloc (sizeof *req, GFP_ATOMIC);
- if (!req) {
- usb_free_urb (urb);
- return;
- }
-
- req->bRequestType = USB_DIR_OUT
- | USB_TYPE_VENDOR
- | USB_RECIP_DEVICE;
- req->bRequest = REQUEST_REGISTER;
- req->wValue = cpu_to_le16 (USBCTL_FLUSH_THIS
- | USBCTL_FLUSH_OTHER);
- req->wIndex = cpu_to_le16 (REG_USBCTL);
- req->wLength = cpu_to_le16 (0);
-
- /* queue an async control request, we don't need
- * to do anything when it finishes except clean up.
- */
- usb_fill_control_urb (urb, dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- (unsigned char *) req,
- NULL, 0,
- nc_flush_complete, req);
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status) {
- kfree (req);
- usb_free_urb (urb);
- return;
- }
-
- if (netif_msg_rx_err (dev))
- devdbg (dev, "flush net1080; too many framing errors");
- dev->frame_errors = 0;
- }
-}
-
-static int net1080_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
-{
- struct nc_header *header;
- struct nc_trailer *trailer;
- u16 hdr_len, packet_len;
-
- if (!(skb->len & 0x01)
- || MIN_FRAMED > skb->len
- || skb->len > FRAMED_SIZE (dev->net->mtu)) {
- dev->stats.rx_frame_errors++;
- dbg ("rx framesize %d range %d..%d mtu %d", skb->len,
- (int)MIN_FRAMED, (int)FRAMED_SIZE (dev->net->mtu),
- dev->net->mtu);
- nc_ensure_sync (dev);
- return 0;
- }
-
- header = (struct nc_header *) skb->data;
- hdr_len = le16_to_cpup (&header->hdr_len);
- packet_len = le16_to_cpup (&header->packet_len);
- if (FRAMED_SIZE (packet_len) > MAX_PACKET) {
- dev->stats.rx_frame_errors++;
- dbg ("packet too big, %d", packet_len);
- nc_ensure_sync (dev);
- return 0;
- } else if (hdr_len < MIN_HEADER) {
- dev->stats.rx_frame_errors++;
- dbg ("header too short, %d", hdr_len);
- nc_ensure_sync (dev);
- return 0;
- } else if (hdr_len > MIN_HEADER) {
- // out of band data for us?
- dbg ("header OOB, %d bytes", hdr_len - MIN_HEADER);
- nc_ensure_sync (dev);
- // switch (vendor/product ids) { ... }
- }
- skb_pull (skb, hdr_len);
-
- trailer = (struct nc_trailer *)
- (skb->data + skb->len - sizeof *trailer);
- skb_trim (skb, skb->len - sizeof *trailer);
-
- if ((packet_len & 0x01) == 0) {
- if (skb->data [packet_len] != PAD_BYTE) {
- dev->stats.rx_frame_errors++;
- dbg ("bad pad");
- return 0;
- }
- skb_trim (skb, skb->len - 1);
- }
- if (skb->len != packet_len) {
- dev->stats.rx_frame_errors++;
- dbg ("bad packet len %d (expected %d)",
- skb->len, packet_len);
- nc_ensure_sync (dev);
- return 0;
- }
- if (header->packet_id != get_unaligned (&trailer->packet_id)) {
- dev->stats.rx_fifo_errors++;
- dbg ("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
- le16_to_cpu (header->packet_id),
- le16_to_cpu (trailer->packet_id));
- return 0;
- }
-#if 0
- devdbg (dev, "frame <rx h %d p %d id %d", header->hdr_len,
- header->packet_len, header->packet_id);
-#endif
- dev->frame_errors = 0;
- return 1;
-}
-
-static struct sk_buff *
-net1080_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags)
-{
- int padlen;
- struct sk_buff *skb2;
-
- padlen = ((skb->len + sizeof (struct nc_header)
- + sizeof (struct nc_trailer)) & 0x01) ? 0 : 1;
- if (!skb_cloned (skb)) {
- int headroom = skb_headroom (skb);
- int tailroom = skb_tailroom (skb);
-
- if ((padlen + sizeof (struct nc_trailer)) <= tailroom
- && sizeof (struct nc_header) <= headroom)
- /* There's enough head and tail room */
- return skb;
-
- if ((sizeof (struct nc_header) + padlen
- + sizeof (struct nc_trailer)) <
- (headroom + tailroom)) {
- /* There's enough total room, so just readjust */
- skb->data = memmove (skb->head
- + sizeof (struct nc_header),
- skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- return skb;
- }
- }
-
- /* Create a new skb to use with the correct size */
- skb2 = skb_copy_expand (skb,
- sizeof (struct nc_header),
- sizeof (struct nc_trailer) + padlen,
- flags);
- dev_kfree_skb_any (skb);
- return skb2;
-}
-
-static const struct driver_info net1080_info = {
- .description = "NetChip TurboCONNECT",
- .flags = FLAG_FRAMING_NC,
- .reset = net1080_reset,
- .check_connect =net1080_check_connect,
- .rx_fixup = net1080_rx_fixup,
- .tx_fixup = net1080_tx_fixup,
-};
-
-#endif /* CONFIG_USB_NET1080 */
-
-
-
-#ifdef CONFIG_USB_PL2301
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
- *
- * The protocol and handshaking used here should be bug-compatible
- * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
- *
- *-------------------------------------------------------------------------*/
-
-/*
- * Bits 0-4 can be used for software handshaking; they're set from
- * one end, cleared from the other, "read" with the interrupt byte.
- */
-#define PL_S_EN (1<<7) /* (feature only) suspend enable */
-/* reserved bit -- rx ready (6) ? */
-#define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */
-#define PL_RESET_OUT (1<<4) /* reset output pipe */
-#define PL_RESET_IN (1<<3) /* reset input pipe */
-#define PL_TX_C (1<<2) /* transmission complete */
-#define PL_TX_REQ (1<<1) /* transmission received */
-#define PL_PEER_E (1<<0) /* peer exists */
-
-static inline int
-pl_vendor_req (struct usbnet *dev, u8 req, u8 val, u8 index)
-{
- return usb_control_msg (dev->udev,
- usb_rcvctrlpipe (dev->udev, 0),
- req,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- val, index,
- NULL, 0,
- CONTROL_TIMEOUT_MS);
-}
-
-static inline int
-pl_clear_QuickLink_features (struct usbnet *dev, int val)
-{
- return pl_vendor_req (dev, 1, (u8) val, 0);
-}
-
-static inline int
-pl_set_QuickLink_features (struct usbnet *dev, int val)
-{
- return pl_vendor_req (dev, 3, (u8) val, 0);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int pl_reset (struct usbnet *dev)
-{
- /* some units seem to need this reset, others reject it utterly.
- * FIXME be more like "naplink" or windows drivers.
- */
- (void) pl_set_QuickLink_features (dev,
- PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
- return 0;
-}
-
-static const struct driver_info prolific_info = {
- .description = "Prolific PL-2301/PL-2302",
- .flags = FLAG_NO_SETINT,
- /* some PL-2302 versions seem to fail usb_set_interface() */
- .reset = pl_reset,
-};
-
-#endif /* CONFIG_USB_PL2301 */
-
-
-#ifdef CONFIG_USB_KC2190
-#define HAVE_HARDWARE
-static const struct driver_info kc2190_info = {
- .description = "KC Technology KC-190",
-};
-#endif /* CONFIG_USB_KC2190 */
-
-
-#ifdef CONFIG_USB_ARMLINUX
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Intel's SA-1100 chip integrates basic USB support, and is used
- * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
- * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
- * network using minimal USB framing data.
- *
- * This describes the driver currently in standard ARM Linux kernels.
- * The Zaurus uses a different driver (see later).
- *
- * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
- * and different USB endpoint numbering than the SA1100 devices. The
- * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
- * so we rely on the endpoint descriptors.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info linuxdev_info = {
- .description = "Linux Device",
- .check_connect = always_connected,
-};
-
-static const struct driver_info yopy_info = {
- .description = "Yopy",
- .check_connect = always_connected,
-};
-
-static const struct driver_info blob_info = {
- .description = "Boot Loader OBject",
- .check_connect = always_connected,
-};
-
-#endif /* CONFIG_USB_ARMLINUX */
-
-
-#ifdef CONFIG_USB_ZAURUS
-#define HAVE_HARDWARE
-
-#include <linux/crc32.h>
-
-/*-------------------------------------------------------------------------
- *
- * Zaurus is also a SA-1110 based PDA, but one using a different driver
- * (and framing) for its USB slave/gadget controller than the case above.
- *
- * For the current version of that driver, the main way that framing is
- * nonstandard (also from perspective of the CDC ethernet model!) is a
- * crc32, added to help detect when some sa1100 usb-to-memory DMA errata
- * haven't been fully worked around. Also, all Zaurii use the same
- * default Ethernet address.
- *
- * PXA based models use the same framing, and also can't implement
- * set_interface properly.
- *
- * All known Zaurii lie about their standards conformance. Most lie by
- * saying they support CDC Ethernet. Some lie and say they support CDC
- * MDLM (as if for access to cell phone modems). Someone, please beat
- * on Sharp (and other such vendors) for a while with a cluestick.
- *
- *-------------------------------------------------------------------------*/
-
-static struct sk_buff *
-zaurus_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags)
-{
- int padlen;
- struct sk_buff *skb2;
-
- padlen = 2;
- if (!skb_cloned (skb)) {
- int tailroom = skb_tailroom (skb);
- if ((padlen + 4) <= tailroom)
- goto done;
- }
- skb2 = skb_copy_expand (skb, 0, 4 + padlen, flags);
- dev_kfree_skb_any (skb);
- skb = skb2;
- if (skb) {
- u32 fcs;
-done:
- fcs = crc32_le (~0, skb->data, skb->len);
- fcs = ~fcs;
-
- *skb_put (skb, 1) = fcs & 0xff;
- *skb_put (skb, 1) = (fcs>> 8) & 0xff;
- *skb_put (skb, 1) = (fcs>>16) & 0xff;
- *skb_put (skb, 1) = (fcs>>24) & 0xff;
- }
- return skb;
-}
-
-static const struct driver_info zaurus_sl5x00_info = {
- .description = "Sharp Zaurus SL-5x00",
- .flags = FLAG_FRAMING_Z,
- .check_connect = always_connected,
- .bind = generic_cdc_bind,
- .unbind = cdc_unbind,
- .tx_fixup = zaurus_tx_fixup,
-};
-#define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info)
-
-static const struct driver_info zaurus_pxa_info = {
- .description = "Sharp Zaurus, PXA-2xx based",
- .flags = FLAG_FRAMING_Z,
- .check_connect = always_connected,
- .bind = generic_cdc_bind,
- .unbind = cdc_unbind,
- .tx_fixup = zaurus_tx_fixup,
-};
-#define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info)
-
-static const struct driver_info olympus_mxl_info = {
- .description = "Olympus R1000",
- .flags = FLAG_FRAMING_Z,
- .check_connect = always_connected,
- .bind = generic_cdc_bind,
- .unbind = cdc_unbind,
- .tx_fixup = zaurus_tx_fixup,
-};
-#define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info)
-
-
-/* Some more recent products using Lineo/Belcarra code will wrongly claim
- * CDC MDLM conformance. They aren't conformant: data endpoints live
- * in the control interface, there's no data interface, and it's not used
- * to talk to a cell phone radio. But at least we can detect these two
- * pseudo-classes, rather than growing this product list with entries for
- * each new nonconformant product (sigh).
- */
-static const u8 safe_guid[16] = {
- 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
- 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
-};
-static const u8 blan_guid[16] = {
- 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
- 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
-};
-
-static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- u8 *buf = intf->cur_altsetting->extra;
- int len = intf->cur_altsetting->extralen;
- struct usb_cdc_mdlm_desc *desc = NULL;
- struct usb_cdc_mdlm_detail_desc *detail = NULL;
-
- while (len > 3) {
- if (buf [1] != USB_DT_CS_INTERFACE)
- goto next_desc;
-
- /* use bDescriptorSubType, and just verify that we get a
- * "BLAN" (or "SAFE") descriptor.
- */
- switch (buf [2]) {
- case USB_CDC_MDLM_TYPE:
- if (desc) {
- dev_dbg (&intf->dev, "extra MDLM\n");
- goto bad_desc;
- }
- desc = (void *) buf;
- if (desc->bLength != sizeof *desc) {
- dev_dbg (&intf->dev, "MDLM len %u\n",
- desc->bLength);
- goto bad_desc;
- }
- /* expect bcdVersion 1.0, ignore */
- if (memcmp(&desc->bGUID, blan_guid, 16)
- && memcmp(&desc->bGUID, safe_guid, 16) ) {
- /* hey, this one might _really_ be MDLM! */
- dev_dbg (&intf->dev, "MDLM guid\n");
- goto bad_desc;
- }
- break;
- case USB_CDC_MDLM_DETAIL_TYPE:
- if (detail) {
- dev_dbg (&intf->dev, "extra MDLM detail\n");
- goto bad_desc;
- }
- detail = (void *) buf;
- switch (detail->bGuidDescriptorType) {
- case 0: /* "SAFE" */
- if (detail->bLength != (sizeof *detail + 2))
- goto bad_detail;
- break;
- case 1: /* "BLAN" */
- if (detail->bLength != (sizeof *detail + 3))
- goto bad_detail;
- break;
- default:
- goto bad_detail;
- }
-
- /* assuming we either noticed BLAN already, or will
- * find it soon, there are some data bytes here:
- * - bmNetworkCapabilities (unused)
- * - bmDataCapabilities (bits, see below)
- * - bPad (ignored, for PADAFTER -- BLAN-only)
- * bits are:
- * - 0x01 -- Zaurus framing (add CRC)
- * - 0x02 -- PADBEFORE (CRC includes some padding)
- * - 0x04 -- PADAFTER (some padding after CRC)
- * - 0x08 -- "fermat" packet mangling (for hw bugs)
- * the PADBEFORE appears not to matter; we interop
- * with devices that use it and those that don't.
- */
- if ((detail->bDetailData[1] & ~02) != 0x01) {
- /* bmDataCapabilites == 0 would be fine too,
- * but framing is minidriver-coupled for now.
- */
-bad_detail:
- dev_dbg (&intf->dev,
- "bad MDLM detail, %d %d %d\n",
- detail->bLength,
- detail->bDetailData[0],
- detail->bDetailData[2]);
- goto bad_desc;
- }
- break;
- }
-next_desc:
- len -= buf [0]; /* bLength */
- buf += buf [0];
- }
-
- if (!desc || !detail) {
- dev_dbg (&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
- desc ? "" : "func ",
- detail ? "" : "detail ");
- goto bad_desc;
- }
-
- /* There's probably a CDC Ethernet descriptor there, but we can't
- * rely on the Ethernet address it provides since not all vendors
- * bother to make it unique. Likewise there's no point in tracking
- * of the CDC event notifications.
- */
- return get_endpoints (dev, intf);
-
-bad_desc:
- dev_info (&dev->udev->dev, "unsupported MDLM descriptors\n");
- return -ENODEV;
-}
-
-static const struct driver_info bogus_mdlm_info = {
- .description = "pseudo-MDLM (BLAN) device",
- .flags = FLAG_FRAMING_Z,
- .check_connect = always_connected,
- .tx_fixup = zaurus_tx_fixup,
- .bind = blan_mdlm_bind,
-};
-
-#else
-
-/* blacklist all those devices */
-#define ZAURUS_STRONGARM_INFO 0
-#define ZAURUS_PXA_INFO 0
-#define OLYMPUS_MXL_INFO 0
-
-#endif
+EXPORT_SYMBOL_GPL(usbnet_skb_return);
/*-------------------------------------------------------------------------
@@ -2868,22 +230,12 @@ static const struct driver_info bogus_mdlm_info = {
static int usbnet_change_mtu (struct net_device *net, int new_mtu)
{
struct usbnet *dev = netdev_priv(net);
+ int ll_mtu = new_mtu + net->hard_header_len;
- if (new_mtu <= MIN_PACKET || new_mtu > MAX_PACKET)
+ if (new_mtu <= 0 || ll_mtu > dev->hard_mtu)
return -EINVAL;
-#ifdef CONFIG_USB_NET1080
- if (((dev->driver_info->flags) & FLAG_FRAMING_NC)) {
- if (FRAMED_SIZE (new_mtu) > MAX_PACKET)
- return -EINVAL;
- }
-#endif
-#ifdef CONFIG_USB_GENESYS
- if (((dev->driver_info->flags) & FLAG_FRAMING_GL)
- && new_mtu > GL_MAX_PACKET_LEN)
- return -EINVAL;
-#endif
// no second zero-length packet read wanted after mtu-sized packets
- if (((new_mtu + sizeof (struct ethhdr)) % dev->maxpacket) == 0)
+ if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
net->mtu = new_mtu;
return 0;
@@ -2922,7 +274,7 @@ static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_hea
* NOTE: annoying asymmetry: if it's active, schedule_work() fails,
* but tasklet_schedule() doesn't. hope the failure is rare.
*/
-static void defer_kevent (struct usbnet *dev, int work)
+void usbnet_defer_kevent (struct usbnet *dev, int work)
{
set_bit (work, &dev->flags);
if (!schedule_work (&dev->kevent))
@@ -2930,50 +282,24 @@ static void defer_kevent (struct usbnet *dev, int work)
else
devdbg (dev, "kevent %d scheduled", work);
}
+EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
/*-------------------------------------------------------------------------*/
static void rx_complete (struct urb *urb, struct pt_regs *regs);
-static void rx_submit (struct usbnet *dev, struct urb *urb, int flags)
+static void rx_submit (struct usbnet *dev, struct urb *urb, unsigned flags)
{
struct sk_buff *skb;
struct skb_data *entry;
int retval = 0;
unsigned long lockflags;
- size_t size;
-
-#ifdef CONFIG_USB_NET1080
- if (dev->driver_info->flags & FLAG_FRAMING_NC)
- size = FRAMED_SIZE (dev->net->mtu);
- else
-#endif
-#ifdef CONFIG_USB_GENESYS
- if (dev->driver_info->flags & FLAG_FRAMING_GL)
- size = GL_RCV_BUF_SIZE;
- else
-#endif
-#ifdef CONFIG_USB_ZAURUS
- if (dev->driver_info->flags & FLAG_FRAMING_Z)
- size = 6 + (sizeof (struct ethhdr) + dev->net->mtu);
- else
-#endif
-#ifdef CONFIG_USB_RNDIS
- if (dev->driver_info->flags & FLAG_FRAMING_RN)
- size = RNDIS_MAX_TRANSFER;
- else
-#endif
-#ifdef CONFIG_USB_AX8817X
- if (dev->driver_info->flags & FLAG_FRAMING_AX)
- size = 2048;
- else
-#endif
- size = (sizeof (struct ethhdr) + dev->net->mtu);
+ size_t size = dev->rx_urb_size;
if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
if (netif_msg_rx_err (dev))
devdbg (dev, "no rx skb");
- defer_kevent (dev, EVENT_RX_MEMORY);
+ usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
usb_free_urb (urb);
return;
}
@@ -2987,7 +313,6 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, int flags)
usb_fill_bulk_urb (urb, dev->udev, dev->in,
skb->data, size, rx_complete, skb);
- urb->transfer_flags |= URB_ASYNC_UNLINK;
spin_lock_irqsave (&dev->rxq.lock, lockflags);
@@ -2996,10 +321,10 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, int flags)
&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
case -EPIPE:
- defer_kevent (dev, EVENT_RX_HALT);
+ usbnet_defer_kevent (dev, EVENT_RX_HALT);
break;
case -ENOMEM:
- defer_kevent (dev, EVENT_RX_MEMORY);
+ usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
break;
case -ENODEV:
if (netif_msg_ifdown (dev))
@@ -3037,7 +362,7 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
// else network stack removes extra byte if we forced a short packet
if (skb->len)
- skb_return (dev, skb);
+ usbnet_skb_return (dev, skb);
else {
if (netif_msg_rx_err (dev))
devdbg (dev, "drop");
@@ -3063,7 +388,7 @@ static void rx_complete (struct urb *urb, struct pt_regs *regs)
switch (urb_status) {
// success
case 0:
- if (MIN_PACKET > skb->len || skb->len > MAX_PACKET) {
+ if (skb->len < dev->net->hard_header_len) {
entry->state = rx_cleanup;
dev->stats.rx_errors++;
dev->stats.rx_length_errors++;
@@ -3078,7 +403,7 @@ static void rx_complete (struct urb *urb, struct pt_regs *regs)
// storm, recovering as needed.
case -EPIPE:
dev->stats.rx_errors++;
- defer_kevent (dev, EVENT_RX_HALT);
+ usbnet_defer_kevent (dev, EVENT_RX_HALT);
// FALLTHROUGH
// software-driven interface shutdown
@@ -3320,55 +645,58 @@ done:
/*-------------------------------------------------------------------------*/
-static void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+/* ethtool methods; minidrivers may need to add some more, but
+ * they'll probably want to use this base set.
+ */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
{
struct usbnet *dev = netdev_priv(net);
+ /* REVISIT don't always return "usbnet" */
strncpy (info->driver, driver_name, sizeof info->driver);
strncpy (info->version, DRIVER_VERSION, sizeof info->version);
strncpy (info->fw_version, dev->driver_info->description,
sizeof info->fw_version);
usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
static u32 usbnet_get_link (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
- /* If a check_connect is defined, return it's results */
+ /* If a check_connect is defined, return its result */
if (dev->driver_info->check_connect)
return dev->driver_info->check_connect (dev) == 0;
- /* Otherwise, we're up to avoid breaking scripts */
+ /* Otherwise, say we're up (to avoid breaking scripts) */
return 1;
}
-static u32 usbnet_get_msglevel (struct net_device *net)
+u32 usbnet_get_msglevel (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
return dev->msg_enable;
}
+EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
-static void usbnet_set_msglevel (struct net_device *net, u32 level)
+void usbnet_set_msglevel (struct net_device *net, u32 level)
{
struct usbnet *dev = netdev_priv(net);
dev->msg_enable = level;
}
+EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
-static int usbnet_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
-{
-#ifdef NEED_MII
- {
- struct usbnet *dev = netdev_priv(net);
-
- if (dev->mii.mdio_read != NULL && dev->mii.mdio_write != NULL)
- return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
- }
-#endif
- return -EOPNOTSUPP;
-}
+/* drivers may override default ethtool_ops in their bind() routine */
+static struct ethtool_ops usbnet_ethtool_ops = {
+ .get_drvinfo = usbnet_get_drvinfo,
+ .get_link = usbnet_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+};
/*-------------------------------------------------------------------------*/
@@ -3387,19 +715,24 @@ kevent (void *data)
if (test_bit (EVENT_TX_HALT, &dev->flags)) {
unlink_urbs (dev, &dev->txq);
status = usb_clear_halt (dev->udev, dev->out);
- if (status < 0 && status != -EPIPE) {
+ if (status < 0
+ && status != -EPIPE
+ && status != -ESHUTDOWN) {
if (netif_msg_tx_err (dev))
deverr (dev, "can't clear tx halt, status %d",
status);
} else {
clear_bit (EVENT_TX_HALT, &dev->flags);
- netif_wake_queue (dev->net);
+ if (status != -ESHUTDOWN)
+ netif_wake_queue (dev->net);
}
}
if (test_bit (EVENT_RX_HALT, &dev->flags)) {
unlink_urbs (dev, &dev->rxq);
status = usb_clear_halt (dev->udev, dev->in);
- if (status < 0 && status != -EPIPE) {
+ if (status < 0
+ && status != -EPIPE
+ && status != -ESHUTDOWN) {
if (netif_msg_rx_err (dev))
deverr (dev, "can't clear rx halt, status %d",
status);
@@ -3458,7 +791,7 @@ static void tx_complete (struct urb *urb, struct pt_regs *regs)
switch (urb->status) {
case -EPIPE:
- defer_kevent (dev, EVENT_TX_HALT);
+ usbnet_defer_kevent (dev, EVENT_TX_HALT);
break;
/* software-driven interface shutdown */
@@ -3515,10 +848,6 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
struct skb_data *entry;
struct driver_info *info = dev->driver_info;
unsigned long flags;
-#ifdef CONFIG_USB_NET1080
- struct nc_header *header = NULL;
- struct nc_trailer *trailer = NULL;
-#endif /* CONFIG_USB_NET1080 */
// some devices want funky USB-level framing, for
// win32 driver (usually) and/or hardware quirks
@@ -3544,24 +873,8 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
entry->state = tx_start;
entry->length = length;
- // FIXME: reorganize a bit, so that fixup() fills out NetChip
- // framing too. (Packet ID update needs the spinlock...)
- // [ BETTER: we already own net->xmit_lock, that's enough ]
-
-#ifdef CONFIG_USB_NET1080
- if (info->flags & FLAG_FRAMING_NC) {
- header = (struct nc_header *) skb_push (skb, sizeof *header);
- header->hdr_len = cpu_to_le16 (sizeof (*header));
- header->packet_len = cpu_to_le16 (length);
- if (!((skb->len + sizeof *trailer) & 0x01))
- *skb_put (skb, 1) = PAD_BYTE;
- trailer = (struct nc_trailer *) skb_put (skb, sizeof *trailer);
- }
-#endif /* CONFIG_USB_NET1080 */
-
usb_fill_bulk_urb (urb, dev->udev, dev->out,
skb->data, skb->len, tx_complete, skb);
- urb->transfer_flags |= URB_ASYNC_UNLINK;
/* don't assume the hardware handles USB_ZERO_PACKET
* NOTE: strictly conforming cdc-ether devices should expect
@@ -3574,22 +887,10 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
spin_lock_irqsave (&dev->txq.lock, flags);
-#ifdef CONFIG_USB_NET1080
- if (info->flags & FLAG_FRAMING_NC) {
- header->packet_id = cpu_to_le16 ((u16)dev->dev_packet_id++);
- put_unaligned (header->packet_id, &trailer->packet_id);
-#if 0
- devdbg (dev, "frame >tx h %d p %d id %d",
- header->hdr_len, header->packet_len,
- header->packet_id);
-#endif
- }
-#endif /* CONFIG_USB_NET1080 */
-
switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
case -EPIPE:
netif_stop_queue (net);
- defer_kevent (dev, EVENT_TX_HALT);
+ usbnet_defer_kevent (dev, EVENT_TX_HALT);
break;
default:
if (netif_msg_tx_err (dev))
@@ -3692,7 +993,7 @@ static void usbnet_bh (unsigned long param)
// precondition: never called in_interrupt
-static void usbnet_disconnect (struct usb_interface *intf)
+void usbnet_disconnect (struct usb_interface *intf)
{
struct usbnet *dev;
struct usb_device *xdev;
@@ -3706,7 +1007,8 @@ static void usbnet_disconnect (struct usb_interface *intf)
xdev = interface_to_usbdev (intf);
if (netif_msg_probe (dev))
- devinfo (dev, "unregister usbnet usb-%s-%s, %s",
+ devinfo (dev, "unregister '%s' usb-%s-%s, %s",
+ intf->dev.driver->name,
xdev->bus->bus_name, xdev->devpath,
dev->driver_info->description);
@@ -3722,15 +1024,14 @@ static void usbnet_disconnect (struct usb_interface *intf)
free_netdev(net);
usb_put_dev (xdev);
}
+EXPORT_SYMBOL_GPL(usbnet_disconnect);
/*-------------------------------------------------------------------------*/
-static struct ethtool_ops usbnet_ethtool_ops;
-
// precondition: never called in_interrupt
-static int
+int
usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
{
struct usbnet *dev;
@@ -3779,6 +1080,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
strcpy (net->name, "usb%d");
memcpy (net->dev_addr, node_id, sizeof node_id);
+ /* rx and tx sides can use different message sizes;
+ * bind() should set rx_urb_size in that case.
+ */
+ dev->hard_mtu = net->mtu + net->hard_header_len;
#if 0
// dma_supported() is deeply broken on almost all architectures
// possible with some EHCI controllers
@@ -3793,7 +1098,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
net->stop = usbnet_stop;
net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
net->tx_timeout = usbnet_tx_timeout;
- net->do_ioctl = usbnet_ioctl;
net->ethtool_ops = &usbnet_ethtool_ops;
// allow device-specific bind/init procedures
@@ -3806,8 +1110,12 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
if ((dev->driver_info->flags & FLAG_ETHER) != 0
&& (net->dev_addr [0] & 0x02) == 0)
strcpy (net->name, "eth%d");
- } else if (!info->in || info->out)
- status = get_endpoints (dev, udev);
+
+ /* maybe the remote can't receive an Ethernet MTU */
+ if (net->mtu > (dev->hard_mtu - net->hard_header_len))
+ net->mtu = dev->hard_mtu - net->hard_header_len;
+ } else if (!info->in || !info->out)
+ status = usbnet_get_endpoints (dev, udev);
else {
dev->in = usb_rcvbulkpipe (xdev, info->in);
dev->out = usb_sndbulkpipe (xdev, info->out);
@@ -3819,12 +1127,13 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
status = 0;
}
-
if (status == 0 && dev->status)
status = init_status (dev, udev);
if (status < 0)
goto out1;
+ if (!dev->rx_urb_size)
+ dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
SET_NETDEV_DEV(net, &udev->dev);
@@ -3832,8 +1141,9 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
if (status)
goto out3;
if (netif_msg_probe (dev))
- devinfo (dev, "register usbnet at usb-%s-%s, %s, "
+ devinfo (dev, "register '%s' at usb-%s-%s, %s, "
"%02x:%02x:%02x:%02x:%02x:%02x",
+ udev->dev.driver->name,
xdev->bus->bus_name, xdev->devpath,
dev->driver_info->description,
net->dev_addr [0], net->dev_addr [1],
@@ -3857,12 +1167,15 @@ out:
usb_put_dev(xdev);
return status;
}
+EXPORT_SYMBOL_GPL(usbnet_probe);
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_PM
+/* FIXME these suspend/resume methods assume non-CDC style
+ * devices, with only one interface.
+ */
-static int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
+int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
@@ -3875,8 +1188,9 @@ static int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
intf->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
+EXPORT_SYMBOL_GPL(usbnet_suspend);
-static int usbnet_resume (struct usb_interface *intf)
+int usbnet_resume (struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
@@ -3885,357 +1199,27 @@ static int usbnet_resume (struct usb_interface *intf)
tasklet_schedule (&dev->bh);
return 0;
}
+EXPORT_SYMBOL_GPL(usbnet_resume);
-#else /* !CONFIG_PM */
-
-#define usbnet_suspend NULL
-#define usbnet_resume NULL
-
-#endif /* CONFIG_PM */
-
-/*-------------------------------------------------------------------------*/
-
-#ifndef HAVE_HARDWARE
-#error You need to configure some hardware for this driver
-#endif
-
-/*
- * chip vendor names won't normally be on the cables, and
- * may not be on the device.
- */
-
-static const struct usb_device_id products [] = {
-
-#ifdef CONFIG_USB_ALI_M5632
-{
- USB_DEVICE (0x0402, 0x5632), // ALi defaults
- .driver_info = (unsigned long) &ali_m5632_info,
-},
-#endif
-
-#ifdef CONFIG_USB_AN2720
-{
- USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults
- .driver_info = (unsigned long) &an2720_info,
-}, {
- USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET
- .driver_info = (unsigned long) &an2720_info,
-},
-#endif
-
-#ifdef CONFIG_USB_BELKIN
-{
- USB_DEVICE (0x050d, 0x0004), // Belkin
- .driver_info = (unsigned long) &belkin_info,
-}, {
- USB_DEVICE (0x056c, 0x8100), // eTEK
- .driver_info = (unsigned long) &belkin_info,
-}, {
- USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK)
- .driver_info = (unsigned long) &belkin_info,
-},
-#endif
-
-#ifdef CONFIG_USB_AX8817X
-{
- // Linksys USB200M
- USB_DEVICE (0x077b, 0x2226),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Netgear FA120
- USB_DEVICE (0x0846, 0x1040),
- .driver_info = (unsigned long) &netgear_fa120_info,
-}, {
- // DLink DUB-E100
- USB_DEVICE (0x2001, 0x1a00),
- .driver_info = (unsigned long) &dlink_dub_e100_info,
-}, {
- // Intellinet, ST Lab USB Ethernet
- USB_DEVICE (0x0b95, 0x1720),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Hawking UF200, TrendNet TU2-ET100
- USB_DEVICE (0x07b8, 0x420a),
- .driver_info = (unsigned long) &hawking_uf200_info,
-}, {
- // Billionton Systems, USB2AR
- USB_DEVICE (0x08dd, 0x90ff),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // ATEN UC210T
- USB_DEVICE (0x0557, 0x2009),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Buffalo LUA-U2-KTX
- USB_DEVICE (0x0411, 0x003d),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
- USB_DEVICE (0x6189, 0x182d),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // corega FEther USB2-TX
- USB_DEVICE (0x07aa, 0x0017),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Surecom EP-1427X-2
- USB_DEVICE (0x1189, 0x0893),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // goodway corp usb gwusb2e
- USB_DEVICE (0x1631, 0x6200),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // ASIX AX88772 10/100
- USB_DEVICE (0x0b95, 0x7720),
- .driver_info = (unsigned long) &ax88772_info,
-},
-#endif
-
-#ifdef CONFIG_USB_EPSON2888
-{
- USB_DEVICE (0x0525, 0x2888), // EPSON USB client
- .driver_info = (unsigned long) &epson2888_info,
-},
-#endif
-
-#ifdef CONFIG_USB_GENESYS
-{
- USB_DEVICE (0x05e3, 0x0502), // GL620USB-A
- .driver_info = (unsigned long) &genelink_info,
-},
- /* NOT: USB_DEVICE (0x05e3, 0x0501), // GL620USB
- * that's half duplex, not currently supported
- */
-#endif
-
-#ifdef CONFIG_USB_NET1080
-{
- USB_DEVICE (0x0525, 0x1080), // NetChip ref design
- .driver_info = (unsigned long) &net1080_info,
-}, {
- USB_DEVICE (0x06D0, 0x0622), // Laplink Gold
- .driver_info = (unsigned long) &net1080_info,
-},
-#endif
-
-#ifdef CONFIG_USB_PL2301
-{
- USB_DEVICE (0x067b, 0x0000), // PL-2301
- .driver_info = (unsigned long) &prolific_info,
-}, {
- USB_DEVICE (0x067b, 0x0001), // PL-2302
- .driver_info = (unsigned long) &prolific_info,
-},
-#endif
-
-#ifdef CONFIG_USB_KC2190
-{
- USB_DEVICE (0x050f, 0x0190), // KC-190
- .driver_info = (unsigned long) &kc2190_info,
-},
-#endif
-
-#ifdef CONFIG_USB_RNDIS
-{
- /* RNDIS is MSFT's un-official variant of CDC ACM */
- USB_INTERFACE_INFO (USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
- .driver_info = (unsigned long) &rndis_info,
-},
-#endif
-
-#ifdef CONFIG_USB_ARMLINUX
-/*
- * SA-1100 using standard ARM Linux kernels, or compatible.
- * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
- * The sa-1100 "usb-eth" driver handles the basic framing.
- *
- * PXA25x or PXA210 ... these use a "usb-eth" driver much like
- * the sa1100 one, but hardware uses different endpoint numbers.
- *
- * Or the Linux "Ethernet" gadget on hardware that can't talk
- * CDC Ethernet (e.g., no altsettings), in either of two modes:
- * - acting just like the old "usb-eth" firmware, though
- * the implementation is different
- * - supporting RNDIS as the first/default configuration for
- * MS-Windows interop; Linux needs to use the other config
- */
-{
- // 1183 = 0x049F, both used as hex values?
- // Compaq "Itsy" vendor/product id
- USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible
- .driver_info = (unsigned long) &linuxdev_info,
-}, {
- USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy"
- .driver_info = (unsigned long) &yopy_info,
-}, {
- USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
- .driver_info = (unsigned long) &blob_info,
-}, {
- // Linux Ethernet/RNDIS gadget on pxa210/25x/26x
- // e.g. Gumstix, current OpenZaurus, ...
- USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
- .driver_info = (unsigned long) &linuxdev_info,
-},
-#endif
-
-#if defined(CONFIG_USB_ZAURUS) || defined(CONFIG_USB_CDCETHER)
-/*
- * SA-1100 based Sharp Zaurus ("collie"), or compatible.
- * Same idea as above, but different framing.
- *
- * PXA-2xx based models are also lying-about-cdc.
- * Some models don't even tell the same lies ...
- *
- * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries,
- * unlike the older ones with 2.4 "embedix" kernels.
- *
- * NOTE: These entries do double-duty, serving as blacklist entries
- * whenever Zaurus support isn't enabled, but CDC Ethernet is.
- */
-#define ZAURUS_MASTER_INTERFACE \
- .bInterfaceClass = USB_CLASS_COMM, \
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
- .bInterfaceProtocol = USB_CDC_PROTO_NONE
-{
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- .idProduct = 0x8004,
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_STRONGARM_INFO,
-}, {
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- .idProduct = 0x8005, /* A-300 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_PXA_INFO,
-}, {
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- .idProduct = 0x8006, /* B-500/SL-5600 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_PXA_INFO,
-}, {
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- .idProduct = 0x8007, /* C-700 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_PXA_INFO,
-}, {
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- .idProduct = 0x9031, /* C-750 C-760 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_PXA_INFO,
-}, {
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- .idProduct = 0x9032, /* SL-6000 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_PXA_INFO,
-}, {
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x04DD,
- /* reported with some C860 units */
- .idProduct = 0x9050, /* C-860 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = ZAURUS_PXA_INFO,
-},
-
-#ifdef CONFIG_USB_ZAURUS
- /* At least some (reports vary) PXA units have very different lies
- * about their standards support: they claim to be cell phones with
- * direct access to their radios. (They don't conform to CDC MDLM.)
- */
-{
- USB_INTERFACE_INFO (USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
- USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &bogus_mdlm_info,
-},
-#endif
-
-/* Olympus has some models with a Zaurus-compatible option.
- * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
- */
-{
- .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
- | USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x07B4,
- .idProduct = 0x0F02, /* R-1000 */
- ZAURUS_MASTER_INTERFACE,
- .driver_info = OLYMPUS_MXL_INFO,
-},
-#endif
-
-#ifdef CONFIG_USB_CDCETHER
-{
- /* CDC Ether uses two interfaces, not necessarily consecutive.
- * We match the main interface, ignoring the optional device
- * class so we could handle devices that aren't exclusively
- * CDC ether.
- *
- * NOTE: this match must come AFTER entries working around
- * bugs/quirks in a given product (like Zaurus, above).
- */
- USB_INTERFACE_INFO (USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
- USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &cdc_info,
-},
-#endif
-
- { }, // END
-};
-MODULE_DEVICE_TABLE (usb, products);
-
-static struct usb_driver usbnet_driver = {
- .owner = THIS_MODULE,
- .name = driver_name,
- .id_table = products,
- .probe = usbnet_probe,
- .disconnect = usbnet_disconnect,
- .suspend = usbnet_suspend,
- .resume = usbnet_resume,
-};
-
-/* Default ethtool_ops assigned. Devices can override in their bind() routine */
-static struct ethtool_ops usbnet_ethtool_ops = {
- .get_drvinfo = usbnet_get_drvinfo,
- .get_link = usbnet_get_link,
- .get_msglevel = usbnet_get_msglevel,
- .set_msglevel = usbnet_set_msglevel,
-};
/*-------------------------------------------------------------------------*/
-static int __init usbnet_init (void)
+static int __init usbnet_init(void)
{
- // compiler should optimize these out
+ /* compiler should optimize this out */
BUG_ON (sizeof (((struct sk_buff *)0)->cb)
< sizeof (struct skb_data));
-#ifdef CONFIG_USB_CDCETHER
- BUG_ON ((sizeof (((struct usbnet *)0)->data)
- < sizeof (struct cdc_state)));
-#endif
random_ether_addr(node_id);
-
- return usb_register(&usbnet_driver);
+ return 0;
}
-module_init (usbnet_init);
+module_init(usbnet_init);
-static void __exit usbnet_exit (void)
+static void __exit usbnet_exit(void)
{
- usb_deregister (&usbnet_driver);
}
-module_exit (usbnet_exit);
+module_exit(usbnet_exit);
-MODULE_AUTHOR ("David Brownell <dbrownell@users.sourceforge.net>");
-MODULE_DESCRIPTION ("USB Host-to-Host Link Drivers (numerous vendors)");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB network driver framework");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
new file mode 100644
index 00000000000..7aa0abd1a9b
--- /dev/null
+++ b/drivers/usb/net/usbnet.h
@@ -0,0 +1,193 @@
+/*
+ * USB Networking Link Interface
+ *
+ * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef __USBNET_H
+#define __USBNET_H
+
+
+/* interface from usbnet core to each USB networking link we handle */
+struct usbnet {
+ /* housekeeping */
+ struct usb_device *udev;
+ struct driver_info *driver_info;
+ wait_queue_head_t *wait;
+
+ /* i/o info: pipes etc */
+ unsigned in, out;
+ struct usb_host_endpoint *status;
+ unsigned maxpacket;
+ struct timer_list delay;
+
+ /* protocol/interface state */
+ struct net_device *net;
+ struct net_device_stats stats;
+ int msg_enable;
+ unsigned long data [5];
+ u32 xid;
+ u32 hard_mtu; /* count any extra framing */
+ size_t rx_urb_size; /* size for rx urbs */
+ struct mii_if_info mii;
+
+ /* various kinds of pending driver work */
+ struct sk_buff_head rxq;
+ struct sk_buff_head txq;
+ struct sk_buff_head done;
+ struct urb *interrupt;
+ struct tasklet_struct bh;
+
+ struct work_struct kevent;
+ unsigned long flags;
+# define EVENT_TX_HALT 0
+# define EVENT_RX_HALT 1
+# define EVENT_RX_MEMORY 2
+# define EVENT_STS_SPLIT 3
+# define EVENT_LINK_RESET 4
+};
+
+static inline struct usb_driver *driver_of(struct usb_interface *intf)
+{
+ return to_usb_driver(intf->dev.driver);
+}
+
+/* interface from the device/framing level "minidriver" to core */
+struct driver_info {
+ char *description;
+
+ int flags;
+/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
+#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */
+#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */
+#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */
+#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */
+
+#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */
+#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */
+
+#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
+
+ /* init device ... can sleep, or cause probe() failure */
+ int (*bind)(struct usbnet *, struct usb_interface *);
+
+ /* cleanup device ... can sleep, but can't fail */
+ void (*unbind)(struct usbnet *, struct usb_interface *);
+
+ /* reset device ... can sleep */
+ int (*reset)(struct usbnet *);
+
+ /* see if peer is connected ... can sleep */
+ int (*check_connect)(struct usbnet *);
+
+ /* for status polling */
+ void (*status)(struct usbnet *, struct urb *);
+
+ /* link reset handling, called from defer_kevent */
+ int (*link_reset)(struct usbnet *);
+
+ /* fixup rx packet (strip framing) */
+ int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
+
+ /* fixup tx packet (add framing) */
+ struct sk_buff *(*tx_fixup)(struct usbnet *dev,
+ struct sk_buff *skb, unsigned flags);
+
+ /* for new devices, use the descriptor-reading code instead */
+ int in; /* rx endpoint */
+ int out; /* tx endpoint */
+
+ unsigned long data; /* Misc driver specific data */
+};
+
+/* Minidrivers are just drivers using the "usbnet" core as a powerful
+ * network-specific subroutine library ... that happens to do pretty
+ * much everything except custom framing and chip-specific stuff.
+ */
+extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
+extern int usbnet_suspend (struct usb_interface *, pm_message_t );
+extern int usbnet_resume (struct usb_interface *);
+extern void usbnet_disconnect(struct usb_interface *);
+
+
+/* Drivers that reuse some of the standard USB CDC infrastructure
+ * (notably, using multiple interfaces according to the the CDC
+ * union descriptor) get some helper code.
+ */
+struct cdc_state {
+ struct usb_cdc_header_desc *header;
+ struct usb_cdc_union_desc *u;
+ struct usb_cdc_ether_desc *ether;
+ struct usb_interface *control;
+ struct usb_interface *data;
+};
+
+extern int usbnet_generic_cdc_bind (struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind (struct usbnet *, struct usb_interface *);
+
+/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/* we record the state for each of our queued skbs */
+enum skb_state {
+ illegal = 0,
+ tx_start, tx_done,
+ rx_start, rx_done, rx_cleanup
+};
+
+struct skb_data { /* skb->cb is one of these */
+ struct urb *urb;
+ struct usbnet *dev;
+ enum skb_state state;
+ size_t length;
+};
+
+
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern void usbnet_defer_kevent (struct usbnet *, int);
+extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
+
+extern u32 usbnet_get_msglevel (struct net_device *);
+extern void usbnet_set_msglevel (struct net_device *, u32);
+extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
+
+/* messaging support includes the interface name, so it must not be
+ * used before it has one ... notably, in minidriver bind() calls.
+ */
+#ifdef DEBUG
+#define devdbg(usbnet, fmt, arg...) \
+ printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
+#else
+#define devdbg(usbnet, fmt, arg...) do {} while(0)
+#endif
+
+#define deverr(usbnet, fmt, arg...) \
+ printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
+#define devwarn(usbnet, fmt, arg...) \
+ printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
+
+#define devinfo(usbnet, fmt, arg...) \
+ printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
+
+
+#endif /* __USBNET_H */
diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c
new file mode 100644
index 00000000000..ee3b892aeab
--- /dev/null
+++ b/drivers/usb/net/zaurus.c
@@ -0,0 +1,386 @@
+/*
+ * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2002-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/usb_cdc.h>
+
+#include "usbnet.h"
+
+
+/*
+ * All known Zaurii lie about their standards conformance. At least
+ * the earliest SA-1100 models lie by saying they support CDC Ethernet.
+ * Some later models (especially PXA-25x and PXA-27x based ones) lie
+ * and say they support CDC MDLM (for access to cell phone modems).
+ *
+ * There are non-Zaurus products that use these same protocols too.
+ *
+ * The annoying thing is that at the same time Sharp was developing
+ * that annoying standards-breaking software, the Linux community had
+ * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
+ * That is, the same functionality but not violating standards.
+ *
+ * The CDC Ethernet nonconformance points are troublesome to hosts
+ * with a true CDC Ethernet implementation:
+ * - Framing appends a CRC, which the spec says drivers "must not" do;
+ * - Transfers data in altsetting zero, instead of altsetting 1;
+ * - All these peripherals use the same ethernet address.
+ *
+ * The CDC MDLM nonconformance is less immediately troublesome, since all
+ * MDLM implementations are quasi-proprietary anyway.
+ */
+
+static struct sk_buff *
+zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags)
+{
+ int padlen;
+ struct sk_buff *skb2;
+
+ padlen = 2;
+ if (!skb_cloned(skb)) {
+ int tailroom = skb_tailroom(skb);
+ if ((padlen + 4) <= tailroom)
+ goto done;
+ }
+ skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (skb) {
+ u32 fcs;
+done:
+ fcs = crc32_le(~0, skb->data, skb->len);
+ fcs = ~fcs;
+
+ *skb_put (skb, 1) = fcs & 0xff;
+ *skb_put (skb, 1) = (fcs>> 8) & 0xff;
+ *skb_put (skb, 1) = (fcs>>16) & 0xff;
+ *skb_put (skb, 1) = (fcs>>24) & 0xff;
+ }
+ return skb;
+}
+
+static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ /* Belcarra's funky framing has other options; mostly
+ * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
+ */
+ dev->net->hard_header_len += 6;
+ dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+ return usbnet_generic_cdc_bind(dev, intf);
+}
+
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+ return 0;
+}
+
+static const struct driver_info zaurus_sl5x00_info = {
+ .description = "Sharp Zaurus SL-5x00",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .bind = zaurus_bind,
+ .unbind = usbnet_cdc_unbind,
+ .tx_fixup = zaurus_tx_fixup,
+};
+#define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info)
+
+static const struct driver_info zaurus_pxa_info = {
+ .description = "Sharp Zaurus, PXA-2xx based",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .bind = zaurus_bind,
+ .unbind = usbnet_cdc_unbind,
+ .tx_fixup = zaurus_tx_fixup,
+};
+#define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info)
+
+static const struct driver_info olympus_mxl_info = {
+ .description = "Olympus R1000",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .bind = zaurus_bind,
+ .unbind = usbnet_cdc_unbind,
+ .tx_fixup = zaurus_tx_fixup,
+};
+#define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info)
+
+
+/* Some more recent products using Lineo/Belcarra code will wrongly claim
+ * CDC MDLM conformance. They aren't conformant: data endpoints live
+ * in the control interface, there's no data interface, and it's not used
+ * to talk to a cell phone radio. But at least we can detect these two
+ * pseudo-classes, rather than growing this product list with entries for
+ * each new nonconformant product (sigh).
+ */
+static const u8 safe_guid[16] = {
+ 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+ 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+};
+static const u8 blan_guid[16] = {
+ 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
+ 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
+};
+
+static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
+ struct usb_cdc_mdlm_desc *desc = NULL;
+ struct usb_cdc_mdlm_detail_desc *detail = NULL;
+
+ while (len > 3) {
+ if (buf [1] != USB_DT_CS_INTERFACE)
+ goto next_desc;
+
+ /* use bDescriptorSubType, and just verify that we get a
+ * "BLAN" (or "SAFE") descriptor.
+ */
+ switch (buf [2]) {
+ case USB_CDC_MDLM_TYPE:
+ if (desc) {
+ dev_dbg(&intf->dev, "extra MDLM\n");
+ goto bad_desc;
+ }
+ desc = (void *) buf;
+ if (desc->bLength != sizeof *desc) {
+ dev_dbg(&intf->dev, "MDLM len %u\n",
+ desc->bLength);
+ goto bad_desc;
+ }
+ /* expect bcdVersion 1.0, ignore */
+ if (memcmp(&desc->bGUID, blan_guid, 16)
+ && memcmp(&desc->bGUID, safe_guid, 16) ) {
+ /* hey, this one might _really_ be MDLM! */
+ dev_dbg(&intf->dev, "MDLM guid\n");
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_MDLM_DETAIL_TYPE:
+ if (detail) {
+ dev_dbg(&intf->dev, "extra MDLM detail\n");
+ goto bad_desc;
+ }
+ detail = (void *) buf;
+ switch (detail->bGuidDescriptorType) {
+ case 0: /* "SAFE" */
+ if (detail->bLength != (sizeof *detail + 2))
+ goto bad_detail;
+ break;
+ case 1: /* "BLAN" */
+ if (detail->bLength != (sizeof *detail + 3))
+ goto bad_detail;
+ break;
+ default:
+ goto bad_detail;
+ }
+
+ /* assuming we either noticed BLAN already, or will
+ * find it soon, there are some data bytes here:
+ * - bmNetworkCapabilities (unused)
+ * - bmDataCapabilities (bits, see below)
+ * - bPad (ignored, for PADAFTER -- BLAN-only)
+ * bits are:
+ * - 0x01 -- Zaurus framing (add CRC)
+ * - 0x02 -- PADBEFORE (CRC includes some padding)
+ * - 0x04 -- PADAFTER (some padding after CRC)
+ * - 0x08 -- "fermat" packet mangling (for hw bugs)
+ * the PADBEFORE appears not to matter; we interop
+ * with devices that use it and those that don't.
+ */
+ if ((detail->bDetailData[1] & ~0x02) != 0x01) {
+ /* bmDataCapabilites == 0 would be fine too,
+ * but framing is minidriver-coupled for now.
+ */
+bad_detail:
+ dev_dbg(&intf->dev,
+ "bad MDLM detail, %d %d %d\n",
+ detail->bLength,
+ detail->bDetailData[0],
+ detail->bDetailData[2]);
+ goto bad_desc;
+ }
+ break;
+ }
+next_desc:
+ len -= buf [0]; /* bLength */
+ buf += buf [0];
+ }
+
+ if (!desc || !detail) {
+ dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
+ desc ? "" : "func ",
+ detail ? "" : "detail ");
+ goto bad_desc;
+ }
+
+ /* There's probably a CDC Ethernet descriptor there, but we can't
+ * rely on the Ethernet address it provides since not all vendors
+ * bother to make it unique. Likewise there's no point in tracking
+ * of the CDC event notifications.
+ */
+ return usbnet_get_endpoints(dev, intf);
+
+bad_desc:
+ dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
+ return -ENODEV;
+}
+
+static const struct driver_info bogus_mdlm_info = {
+ .description = "pseudo-MDLM (BLAN) device",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .tx_fixup = zaurus_tx_fixup,
+ .bind = blan_mdlm_bind,
+};
+
+static const struct usb_device_id products [] = {
+#define ZAURUS_MASTER_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8004,
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_STRONGARM_INFO,
+},
+
+/* PXA-2xx based models are also lying-about-cdc. If you add any
+ * more devices that claim to be CDC Ethernet, make sure they get
+ * added to the blacklist in cdc_ether too.
+ *
+ * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries,
+ * unlike the older ones with 2.4 "embedix" kernels.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8005, /* A-300 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8006, /* B-500/SL-5600 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8007, /* C-700 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9031, /* C-750 C-760 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ /* reported with some C860 units */
+ .idProduct = 0x9050, /* C-860 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+},
+
+
+/* At least some of the newest PXA units have very different lies about
+ * their standards support: they claim to be cell phones offering
+ * direct access to their radios! (No, they don't conform to CDC MDLM.)
+ */
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x07B4,
+ .idProduct = 0x0F02, /* R-1000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = OLYMPUS_MXL_INFO,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver zaurus_driver = {
+ .owner = THIS_MODULE,
+ .name = "zaurus",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init zaurus_init(void)
+{
+ return usb_register(&zaurus_driver);
+}
+module_init(zaurus_init);
+
+static void __exit zaurus_exit(void)
+{
+ usb_deregister(&zaurus_driver);
+}
+module_exit(zaurus_exit);
+
+MODULE_AUTHOR("Pavel Machek, David Brownell");
+MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index fc013978837..c4e479ee926 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -847,7 +847,6 @@ static void zd1201_tx_timeout(struct net_device *dev)
return;
dev_warn(&zd->usb->dev, "%s: TX timeout, shooting down urb\n",
dev->name);
- zd->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(zd->tx_urb);
zd->stats.tx_errors++;
/* Restart the timeout to quiet the watchdog: */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 012e63e0580..05c44ae3ed3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -453,8 +453,8 @@ static int generic_startup (struct usb_serial *serial)
priv->cbr_mask = B300;
usb_set_serial_port_data(serial->port[0], priv);
- return (0);
-}
+ return 0;
+}
static int cypress_earthmate_startup (struct usb_serial *serial)
@@ -464,14 +464,15 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
return 1;
}
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_EARTHMATE;
-
- return (0);
+
+ return 0;
} /* cypress_earthmate_startup */
@@ -482,14 +483,15 @@ static int cypress_hidcom_startup (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
return 1;
}
priv = usb_get_serial_port_data(serial->port[0]);
priv->chiptype = CT_CYPHIDCOM;
- return (0);
+ return 0;
} /* cypress_hidcom_startup */
@@ -909,7 +911,8 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi
} /* cypress_ioctl */
-static void cypress_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void cypress_set_termios (struct usb_serial_port *port,
+ struct termios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
@@ -918,7 +921,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
unsigned long flags;
__u8 oldlines;
int linechange = 0;
-
+
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
@@ -931,10 +934,12 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
*(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+ CLOCAL;
} else if (priv->chiptype == CT_CYPHIDCOM) {
*(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
}
priv->termios_initialized = 1;
}
@@ -946,12 +951,15 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
/* check if there are new settings */
if (old_termios) {
if ((cflag != old_termios->c_cflag) ||
- (RELEVANT_IFLAG(iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s - attempting to set new termios settings", __FUNCTION__);
- /* should make a copy of this in case something goes wrong in the function, we can restore it */
+ (RELEVANT_IFLAG(iflag) !=
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s - attempting to set new termios settings",
+ __FUNCTION__);
+ /* should make a copy of this in case something goes
+ * wrong in the function, we can restore it */
spin_lock_irqsave(&priv->lock, flags);
priv->tmp_termios = *(tty->termios);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
} else {
dbg("%s - nothing to do, exiting", __FUNCTION__);
return;
@@ -962,21 +970,34 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
/* set number of data bits, parity, stop bits */
/* when parity is disabled the parity type bit is ignored */
- stop_bits = cflag & CSTOPB ? 1 : 0; /* 1 means 2 stop bits, 0 means 1 stop bit */
-
+ /* 1 means 2 stop bits, 0 means 1 stop bit */
+ stop_bits = cflag & CSTOPB ? 1 : 0;
+
if (cflag & PARENB) {
parity_enable = 1;
- parity_type = cflag & PARODD ? 1 : 0; /* 1 means odd parity, 0 means even parity */
+ /* 1 means odd parity, 0 means even parity */
+ parity_type = cflag & PARODD ? 1 : 0;
} else
parity_enable = parity_type = 0;
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5: data_bits = 0; break;
- case CS6: data_bits = 1; break;
- case CS7: data_bits = 2; break;
- case CS8: data_bits = 3; break;
- default: err("%s - CSIZE was set, but not CS5-CS8", __FUNCTION__); data_bits = 3;
+ case CS5:
+ data_bits = 0;
+ break;
+ case CS6:
+ data_bits = 1;
+ break;
+ case CS7:
+ data_bits = 2;
+ break;
+ case CS8:
+ data_bits = 3;
+ break;
+ default:
+ err("%s - CSIZE was set, but not CS5-CS8",
+ __FUNCTION__);
+ data_bits = 3;
}
} else
data_bits = 3;
@@ -991,63 +1012,85 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
} else {
baud_mask = (cflag & CBAUD);
switch(baud_mask) {
- case B300: dbg("%s - setting baud 300bps", __FUNCTION__); break;
- case B600: dbg("%s - setting baud 600bps", __FUNCTION__); break;
- case B1200: dbg("%s - setting baud 1200bps", __FUNCTION__); break;
- case B2400: dbg("%s - setting baud 2400bps", __FUNCTION__); break;
- case B4800: dbg("%s - setting baud 4800bps", __FUNCTION__); break;
- case B9600: dbg("%s - setting baud 9600bps", __FUNCTION__); break;
- case B19200: dbg("%s - setting baud 19200bps", __FUNCTION__); break;
- case B38400: dbg("%s - setting baud 38400bps", __FUNCTION__); break;
- case B57600: dbg("%s - setting baud 57600bps", __FUNCTION__); break;
- case B115200: dbg("%s - setting baud 115200bps", __FUNCTION__); break;
- default: dbg("%s - unknown masked baud rate", __FUNCTION__);
+ case B300:
+ dbg("%s - setting baud 300bps", __FUNCTION__);
+ break;
+ case B600:
+ dbg("%s - setting baud 600bps", __FUNCTION__);
+ break;
+ case B1200:
+ dbg("%s - setting baud 1200bps", __FUNCTION__);
+ break;
+ case B2400:
+ dbg("%s - setting baud 2400bps", __FUNCTION__);
+ break;
+ case B4800:
+ dbg("%s - setting baud 4800bps", __FUNCTION__);
+ break;
+ case B9600:
+ dbg("%s - setting baud 9600bps", __FUNCTION__);
+ break;
+ case B19200:
+ dbg("%s - setting baud 19200bps", __FUNCTION__);
+ break;
+ case B38400:
+ dbg("%s - setting baud 38400bps", __FUNCTION__);
+ break;
+ case B57600:
+ dbg("%s - setting baud 57600bps", __FUNCTION__);
+ break;
+ case B115200:
+ dbg("%s - setting baud 115200bps", __FUNCTION__);
+ break;
+ default:
+ dbg("%s - unknown masked baud rate", __FUNCTION__);
}
priv->line_control = (CONTROL_DTR | CONTROL_RTS);
}
spin_unlock_irqrestore(&priv->lock, flags);
-
- dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)", __FUNCTION__,
- stop_bits, parity_enable, parity_type, data_bits);
- cypress_serial_control(port, baud_mask, data_bits, stop_bits, parity_enable,
- parity_type, 0, CYPRESS_SET_CONFIG);
+ dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
+ "%d data_bits (+5)", __FUNCTION__, stop_bits,
+ parity_enable, parity_type, data_bits);
+
+ cypress_serial_control(port, baud_mask, data_bits, stop_bits,
+ parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
- /* we perform a CYPRESS_GET_CONFIG so that the current settings are filled into the private structure
- * this should confirm that all is working if it returns what we just set */
+ /* we perform a CYPRESS_GET_CONFIG so that the current settings are
+ * filled into the private structure this should confirm that all is
+ * working if it returns what we just set */
cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
- /* Here we can define custom tty settings for devices
- *
- * the main tty termios flag base comes from empeg.c
- */
+ /* Here we can define custom tty settings for devices; the main tty
+ * termios flag base comes from empeg.c */
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
-
- dbg("Using custom termios settings for a baud rate of 4800bps.");
+ dbg("Using custom termios settings for a baud rate of "
+ "4800bps.");
/* define custom termios settings for NMEA protocol */
tty->termios->c_iflag /* input modes - */
- &= ~(IGNBRK /* disable ignore break */
- | BRKINT /* disable break causes interrupt */
- | PARMRK /* disable mark parity errors */
- | ISTRIP /* disable clear high bit of input characters */
- | INLCR /* disable translate NL to CR */
- | IGNCR /* disable ignore CR */
- | ICRNL /* disable translate CR to NL */
- | IXON); /* disable enable XON/XOFF flow control */
-
+ &= ~(IGNBRK /* disable ignore break */
+ | BRKINT /* disable break causes interrupt */
+ | PARMRK /* disable mark parity errors */
+ | ISTRIP /* disable clear high bit of input char */
+ | INLCR /* disable translate NL to CR */
+ | IGNCR /* disable ignore CR */
+ | ICRNL /* disable translate CR to NL */
+ | IXON); /* disable enable XON/XOFF flow control */
+
tty->termios->c_oflag /* output modes */
- &= ~OPOST; /* disable postprocess output characters */
-
- tty->termios->c_lflag /* line discipline modes */
- &= ~(ECHO /* disable echo input characters */
- | ECHONL /* disable echo new line */
- | ICANON /* disable erase, kill, werase, and rprnt special characters */
- | ISIG /* disable interrupt, quit, and suspend special characters */
- | IEXTEN); /* disable non-POSIX special characters */
+ &= ~OPOST; /* disable postprocess output char */
+ tty->termios->c_lflag /* line discipline modes */
+ &= ~(ECHO /* disable echo input characters */
+ | ECHONL /* disable echo new line */
+ | ICANON /* disable erase, kill, werase, and rprnt
+ special characters */
+ | ISIG /* disable interrupt, quit, and suspend
+ special characters */
+ | IEXTEN); /* disable non-POSIX special characters */
} /* CT_CYPHIDCOM: Application should handle this for device */
linechange = (priv->line_control != oldlines);
@@ -1060,7 +1103,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
}
} /* cypress_set_termios */
-
+
/* returns amount of data still left in soft buffer */
static int cypress_chars_in_buffer(struct usb_serial_port *port)
{
@@ -1088,7 +1131,7 @@ static void cypress_throttle (struct usb_serial_port *port)
spin_lock_irqsave(&priv->lock, flags);
priv->rx_flags = THROTTLED;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -1110,7 +1153,8 @@ static void cypress_unthrottle (struct usb_serial_port *port)
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, "
+ "error %d\n", __FUNCTION__, result);
}
}
@@ -1122,7 +1166,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- char tty_flag = TTY_NORMAL;
+ char tty_flag = TTY_NORMAL;
int havedata = 0;
int bytes = 0;
int result;
@@ -1131,7 +1175,8 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
dbg("%s - port %d", __FUNCTION__, port->number);
if (urb->status) {
- dbg("%s - nonzero read status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero read status received: %d", __FUNCTION__,
+ urb->status);
return;
}
@@ -1155,51 +1200,55 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
case 32:
/* This is for the CY7C64013... */
priv->current_status = data[0] & 0xF8;
- bytes = data[1]+2;
- i=2;
+ bytes = data[1] + 2;
+ i = 2;
if (bytes > 2)
havedata = 1;
break;
case 8:
/* This is for the CY7C63743... */
priv->current_status = data[0] & 0xF8;
- bytes = (data[0] & 0x07)+1;
- i=1;
+ bytes = (data[0] & 0x07) + 1;
+ i = 1;
if (bytes > 1)
havedata = 1;
break;
default:
- dbg("%s - wrong packet size - received %d bytes", __FUNCTION__, urb->actual_length);
+ dbg("%s - wrong packet size - received %d bytes",
+ __FUNCTION__, urb->actual_length);
spin_unlock_irqrestore(&priv->lock, flags);
goto continue_read;
}
spin_unlock_irqrestore(&priv->lock, flags);
- usb_serial_debug_data (debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
+ urb->actual_length, data);
spin_lock_irqsave(&priv->lock, flags);
/* check to see if status has changed */
if (priv != NULL) {
if (priv->current_status != priv->prev_status) {
- priv->diff_status |= priv->current_status ^ priv->prev_status;
+ priv->diff_status |= priv->current_status ^
+ priv->prev_status;
wake_up_interruptible(&priv->delta_msr_wait);
priv->prev_status = priv->current_status;
}
}
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
- /* hangup, as defined in acm.c... this might be a bad place for it though */
- if (tty && !(tty->termios->c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) {
+ /* hangup, as defined in acm.c... this might be a bad place for it
+ * though */
+ if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+ !(priv->current_status & UART_CD)) {
dbg("%s - calling hangup", __FUNCTION__);
tty_hangup(tty);
goto continue_read;
}
- /* There is one error bit... I'm assuming it is a parity error indicator
- * as the generic firmware will set this bit to 1 if a parity error occurs.
- * I can not find reference to any other error events.
- *
- */
+ /* There is one error bit... I'm assuming it is a parity error
+ * indicator as the generic firmware will set this bit to 1 if a
+ * parity error occurs.
+ * I can not find reference to any other error events. */
spin_lock_irqsave(&priv->lock, flags);
if (priv->current_status & CYP_ERROR) {
spin_unlock_irqrestore(&priv->lock, flags);
@@ -1211,7 +1260,8 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
/* process read if there is data other than line status */
if (tty && (bytes > i)) {
for (; i < bytes ; ++i) {
- dbg("pushing byte number %d - %d - %c",i,data[i],data[i]);
+ dbg("pushing byte number %d - %d - %c", i, data[i],
+ data[i]);
if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
tty_flip_buffer_push(tty);
}
@@ -1221,25 +1271,28 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
}
spin_lock_irqsave(&priv->lock, flags);
- priv->bytes_in += bytes; /* control and status byte(s) are also counted */
+ /* control and status byte(s) are also counted */
+ priv->bytes_in += bytes;
spin_unlock_irqrestore(&priv->lock, flags);
continue_read:
-
- /* Continue trying to always read... unless the port has closed. */
+
+ /* Continue trying to always read... unless the port has closed. */
if (port->open_count > 0) {
- usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
- usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
- port->interrupt_in_urb->transfer_buffer,
- port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port,
- interval);
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
+ usb_rcvintpipe(port->serial->dev,
+ port->interrupt_in_endpointAddress),
+ port->interrupt_in_urb->transfer_buffer,
+ port->interrupt_in_urb->transfer_buffer_length,
+ cypress_read_int_callback, port, interval);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev, "%s - failed resubmitting "
+ "read urb, error %d\n", __FUNCTION__,
+ result);
}
-
+
return;
} /* cypress_read_int_callback */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d1964a0c416..0a6e8b474b1 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -269,6 +269,8 @@
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
+static __u16 vendor = FTDI_VID;
+static __u16 product;
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
@@ -407,6 +409,34 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ /*
+ * These will probably use user-space drivers. Uncomment them if
+ * you need them or use the user-specified vendor/product module
+ * parameters (see ftdi_sio.h for the numbers). Make a fuss if
+ * you think the driver should recognize any of them by default.
+ */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */
+ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -418,6 +448,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+ { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
@@ -427,12 +458,21 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
- { } /* Terminating entry */
+ { }, /* Optional parameter entry */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
@@ -2030,6 +2070,15 @@ static int __init ftdi_init (void)
int retval;
dbg("%s", __FUNCTION__);
+ if (vendor > 0 && product > 0) {
+ /* Add user specified VID/PID to reserved element of table. */
+ int i;
+ for (i = 0; id_table_combined[i].idVendor; i++)
+ ;
+ id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ id_table_combined[i].idVendor = vendor;
+ id_table_combined[i].idProduct = product;
+ }
retval = usb_serial_register(&ftdi_sio_device);
if (retval)
goto failed_sio_register;
@@ -2066,4 +2115,9 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
+module_param(vendor, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
+ __MODULE_STRING(FTDI_VID)")");
+module_param(product, ushort, 0);
+MODULE_PARM_DESC(vendor, "User specified product ID");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 9f4342093e8..2c35d74cc6d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -142,10 +142,43 @@
/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
-/* ELV USB Module UO100 (PID sent by Stefan Frings) */
-#define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */
-/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
-#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
+#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
+#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
+#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
/*
* Definitions for ID TECH (www.idt-net.com) devices
@@ -222,6 +255,7 @@
*/
#define FALCOM_VID 0x0F94 /* Vendor Id */
#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
/*
* SUUNTO product ids
@@ -277,6 +311,18 @@
#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID 0xD388
+#define XSENS_CONVERTER_1_PID 0xD389
+#define XSENS_CONVERTER_2_PID 0xD38A
+#define XSENS_CONVERTER_3_PID 0xD38B
+#define XSENS_CONVERTER_4_PID 0xD38C
+#define XSENS_CONVERTER_5_PID 0xD38D
+#define XSENS_CONVERTER_6_PID 0xD38E
+#define XSENS_CONVERTER_7_PID 0xD38F
+
+/*
* Evolution Robotics products (http://www.evolution.com/).
* Submitted by Shawn M. Lavelle.
*/
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index fb092629222..3b958e60f5e 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -383,11 +383,8 @@ static int keyspan_write(struct usb_serial_port *port,
dbg("%s - endpoint %d flip %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), flip);
if (this_urb->status == -EINPROGRESS) {
- if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
- break;
if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ))
break;
- this_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(this_urb);
break;
}
@@ -402,7 +399,6 @@ static int keyspan_write(struct usb_serial_port *port,
/* send the data out the bulk port */
this_urb->transfer_buffer_length = todo + dataOffset;
- this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
this_urb->dev = port->serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
dbg("usb_submit_urb(write bulk) failed (%d)", err);
@@ -1119,10 +1115,8 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp)
static inline void stop_urb(struct urb *urb)
{
- if (urb && urb->status == -EINPROGRESS) {
- urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ if (urb && urb->status == -EINPROGRESS)
usb_kill_urb(urb);
- }
}
static void keyspan_close(struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e9256408757..92d0f925d05 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,29 +45,29 @@
#include "usb-serial.h"
/* Function prototypes */
-static int option_open (struct usb_serial_port *port, struct file *filp);
-static void option_close (struct usb_serial_port *port, struct file *filp);
-static int option_startup (struct usb_serial *serial);
-static void option_shutdown (struct usb_serial *serial);
-static void option_rx_throttle (struct usb_serial_port *port);
-static void option_rx_unthrottle (struct usb_serial_port *port);
-static int option_write_room (struct usb_serial_port *port);
+static int option_open(struct usb_serial_port *port, struct file *filp);
+static void option_close(struct usb_serial_port *port, struct file *filp);
+static int option_startup(struct usb_serial *serial);
+static void option_shutdown(struct usb_serial *serial);
+static void option_rx_throttle(struct usb_serial_port *port);
+static void option_rx_unthrottle(struct usb_serial_port *port);
+static int option_write_room(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
-static int option_write (struct usb_serial_port *port,
- const unsigned char *buf, int count);
+static int option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count);
-static int option_chars_in_buffer (struct usb_serial_port *port);
-static int option_ioctl (struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg);
-static void option_set_termios (struct usb_serial_port *port,
- struct termios *old);
-static void option_break_ctl (struct usb_serial_port *port, int break_state);
-static int option_tiocmget (struct usb_serial_port *port, struct file *file);
-static int option_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear);
-static int option_send_setup (struct usb_serial_port *port);
+static int option_chars_in_buffer(struct usb_serial_port *port);
+static int option_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void option_set_termios(struct usb_serial_port *port,
+ struct termios *old);
+static void option_break_ctl(struct usb_serial_port *port, int break_state);
+static int option_tiocmget(struct usb_serial_port *port, struct file *file);
+static int option_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear);
+static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -76,7 +76,6 @@ static int option_send_setup (struct usb_serial_port *port);
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
-
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
@@ -129,7 +128,6 @@ static int debug;
#define debug 0
#endif
-
/* per port private data */
#define N_IN_URB 4
@@ -156,10 +154,8 @@ struct option_port_private {
unsigned long tx_start_time[N_OUT_URB];
};
-
/* Functions used by new usb-serial code. */
-static int __init
-option_init (void)
+static int __init option_init(void)
{
int retval;
retval = usb_serial_register(&option_3port_device);
@@ -179,8 +175,7 @@ failed_3port_device_register:
return retval;
}
-static void __exit
-option_exit (void)
+static void __exit option_exit(void)
{
usb_deregister (&option_driver);
usb_serial_deregister (&option_3port_device);
@@ -189,39 +184,31 @@ option_exit (void)
module_init(option_init);
module_exit(option_exit);
-static void
-option_rx_throttle (struct usb_serial_port *port)
+static void option_rx_throttle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
-
-static void
-option_rx_unthrottle (struct usb_serial_port *port)
+static void option_rx_unthrottle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
-
-static void
-option_break_ctl (struct usb_serial_port *port, int break_state)
+static void option_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
dbg("%s", __FUNCTION__);
}
-
-static void
-option_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+static void option_set_termios(struct usb_serial_port *port,
+ struct termios *old_termios)
{
dbg("%s", __FUNCTION__);
option_send_setup(port);
}
-static int
-option_tiocmget (struct usb_serial_port *port, struct file *file)
+static int option_tiocmget(struct usb_serial_port *port, struct file *file)
{
unsigned int value;
struct option_port_private *portdata;
@@ -238,9 +225,8 @@ option_tiocmget (struct usb_serial_port *port, struct file *file)
return value;
}
-static int
-option_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear)
+static int option_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
{
struct option_port_private *portdata;
@@ -258,17 +244,15 @@ option_tiocmset (struct usb_serial_port *port, struct file *file,
return option_send_setup(port);
}
-static int
-option_ioctl (struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int option_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* Write */
-static int
-option_write (struct usb_serial_port *port,
- const unsigned char *buf, int count)
+static int option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
struct option_port_private *portdata;
int i;
@@ -289,28 +273,29 @@ option_write (struct usb_serial_port *port,
this_urb = portdata->out_urbs[i];
if (this_urb->status == -EINPROGRESS) {
- if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
- continue;
- if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+ if (time_before(jiffies,
+ portdata->tx_start_time[i] + 10 * HZ))
continue;
- this_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(this_urb);
continue;
}
if (this_urb->status != 0)
- dbg("usb_write %p failed (err=%d)", this_urb, this_urb->status);
+ dbg("usb_write %p failed (err=%d)",
+ this_urb, this_urb->status);
- dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+ dbg("%s: endpoint %d buf %d", __FUNCTION__,
+ usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
memcpy (this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
- this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
- dbg("usb_submit_urb %p (write bulk) failed (%d, has %d)", this_urb, err, this_urb->status);
+ dbg("usb_submit_urb %p (write bulk) failed "
+ "(%d, has %d)", this_urb,
+ err, this_urb->status);
continue;
}
portdata->tx_start_time[i] = jiffies;
@@ -323,8 +308,7 @@ option_write (struct usb_serial_port *port,
return count;
}
-static void
-option_indat_callback (struct urb *urb, struct pt_regs *regs)
+static void option_indat_callback(struct urb *urb, struct pt_regs *regs)
{
int i, err;
int endpoint;
@@ -357,14 +341,14 @@ option_indat_callback (struct urb *urb, struct pt_regs *regs)
if (port->open_count && urb->status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
- printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+ printk(KERN_ERR "%s: resubmit read urb failed. "
+ "(%d)", __FUNCTION__, err);
}
}
return;
}
-static void
-option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+static void option_outdat_callback(struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port;
@@ -376,8 +360,7 @@ option_outdat_callback (struct urb *urb, struct pt_regs *regs)
schedule_work(&port->work);
}
-static void
-option_instat_callback (struct urb *urb, struct pt_regs *regs)
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs)
{
int err;
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
@@ -395,10 +378,12 @@ option_instat_callback (struct urb *urb, struct pt_regs *regs)
dbg("%s: NULL req_pkt\n", __FUNCTION__);
return;
}
- if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+ if ((req_pkt->bRequestType == 0xA1) &&
+ (req_pkt->bRequest == 0x20)) {
int old_dcd_state;
unsigned char signals = *((unsigned char *)
- urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+ urb->transfer_buffer +
+ sizeof(struct usb_ctrlrequest));
dbg("%s: signal x%x", __FUNCTION__, signals);
@@ -408,12 +393,13 @@ option_instat_callback (struct urb *urb, struct pt_regs *regs)
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
- if (port->tty && !C_CLOCAL(port->tty)
- && old_dcd_state && !portdata->dcd_state) {
+ if (port->tty && !C_CLOCAL(port->tty) &&
+ old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
- }
- } else
- dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+ } else {
+ dbg("%s: type %x req %x", __FUNCTION__,
+ req_pkt->bRequestType,req_pkt->bRequest);
+ }
} else
dbg("%s: error %d", __FUNCTION__, urb->status);
@@ -422,13 +408,12 @@ option_instat_callback (struct urb *urb, struct pt_regs *regs)
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
- dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s: resubmit intr urb failed. (%d)",
+ __FUNCTION__, err);
}
}
-
-static int
-option_write_room (struct usb_serial_port *port)
+static int option_write_room(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
@@ -447,9 +432,7 @@ option_write_room (struct usb_serial_port *port)
return data_len;
}
-
-static int
-option_chars_in_buffer (struct usb_serial_port *port)
+static int option_chars_in_buffer(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
@@ -467,9 +450,7 @@ option_chars_in_buffer (struct usb_serial_port *port)
return data_len;
}
-
-static int
-option_open (struct usb_serial_port *port, struct file *filp)
+static int option_open(struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
struct usb_serial *serial = port->serial;
@@ -490,17 +471,21 @@ option_open (struct usb_serial_port *port, struct file *filp)
if (! urb)
continue;
if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+ dbg("%s: dev %p != %p", __FUNCTION__,
+ urb->dev, serial->dev);
continue;
}
- /* make sure endpoint data toggle is synchronized with the device */
-
+ /*
+ * make sure endpoint data toggle is synchronized with the
+ * device
+ */
usb_clear_halt(urb->dev, urb->pipe);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
- dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+ dbg("%s: submit urb %d failed (%d) %d",
+ __FUNCTION__, i, err,
urb->transfer_buffer_length);
}
}
@@ -511,7 +496,8 @@ option_open (struct usb_serial_port *port, struct file *filp)
if (! urb)
continue;
urb->dev = serial->dev;
- /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+ /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 0); */
}
port->tty->low_latency = 1;
@@ -521,17 +507,13 @@ option_open (struct usb_serial_port *port, struct file *filp)
return (0);
}
-static inline void
-stop_urb (struct urb *urb)
+static inline void stop_urb(struct urb *urb)
{
- if (urb && urb->status == -EINPROGRESS) {
- urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ if (urb && urb->status == -EINPROGRESS)
usb_kill_urb(urb);
- }
}
-static void
-option_close (struct usb_serial_port *port, struct file *filp)
+static void option_close(struct usb_serial_port *port, struct file *filp)
{
int i;
struct usb_serial *serial = port->serial;
@@ -555,12 +537,10 @@ option_close (struct usb_serial_port *port, struct file *filp)
port->tty = NULL;
}
-
/* Helper functions used by option_setup_urbs */
-static struct urb *
-option_setup_urb (struct usb_serial *serial, int endpoint,
- int dir, void *ctx, char *buf, int len,
- void (*callback)(struct urb *, struct pt_regs *regs))
+static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback)(struct urb *, struct pt_regs *regs))
{
struct urb *urb;
@@ -582,8 +562,7 @@ option_setup_urb (struct usb_serial *serial, int endpoint,
}
/* Setup urbs */
-static void
-option_setup_urbs (struct usb_serial *serial)
+static void option_setup_urbs(struct usb_serial *serial)
{
int j;
struct usb_serial_port *port;
@@ -609,9 +588,7 @@ option_setup_urbs (struct usb_serial *serial)
}
}
-
-static int
-option_send_setup (struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
@@ -627,16 +604,15 @@ option_send_setup (struct usb_serial_port *port)
if (portdata->rts_state)
val |= 0x02;
- return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
}
return 0;
}
-
-static int
-option_startup (struct usb_serial *serial)
+static int option_startup(struct usb_serial *serial)
{
int i, err;
struct usb_serial_port *port;
@@ -647,9 +623,10 @@ option_startup (struct usb_serial *serial)
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
- portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+ portdata = kmalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
- dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+ dbg("%s: kmalloc for option_port_private (%d) failed!.",
+ __FUNCTION__, i);
return (1);
}
memset(portdata, 0, sizeof(struct option_port_private));
@@ -660,7 +637,8 @@ option_startup (struct usb_serial *serial)
continue;
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
- dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+ dbg("%s: submit irq_in urb failed %d",
+ __FUNCTION__, err);
}
option_setup_urbs(serial);
@@ -668,8 +646,7 @@ option_startup (struct usb_serial *serial)
return (0);
}
-static void
-option_shutdown (struct usb_serial *serial)
+static void option_shutdown(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 7eab5d4cf3a..461474176cf 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -538,8 +538,10 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp)
dbg("%s - port %d", __FUNCTION__, port->number);
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
+ if (priv->type != HX) {
+ usb_clear_halt(serial->dev, port->write_urb->pipe);
+ usb_clear_halt(serial->dev, port->read_urb->pipe);
+ }
buf = kmalloc(10, GFP_KERNEL);
if (buf==NULL)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 0267b26dde1..e77fbdfc782 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -531,7 +531,7 @@ bailout_kref_put:
static void serial_close(struct tty_struct *tty, struct file * filp)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
if (!port)
return;
@@ -561,7 +561,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -EINVAL;
dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
@@ -580,7 +580,7 @@ exit:
static int serial_write_room (struct tty_struct *tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -EINVAL;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -599,7 +599,7 @@ exit:
static int serial_chars_in_buffer (struct tty_struct *tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -EINVAL;
dbg("%s = port %d", __FUNCTION__, port->number);
@@ -618,7 +618,7 @@ exit:
static void serial_throttle (struct tty_struct * tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -634,7 +634,7 @@ static void serial_throttle (struct tty_struct * tty)
static void serial_unthrottle (struct tty_struct * tty)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -650,7 +650,7 @@ static void serial_unthrottle (struct tty_struct * tty)
static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
@@ -672,7 +672,7 @@ exit:
static void serial_set_termios (struct tty_struct *tty, struct termios * old)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -688,7 +688,7 @@ static void serial_set_termios (struct tty_struct *tty, struct termios * old)
static void serial_break (struct tty_struct *tty, int break_state)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -749,7 +749,7 @@ done:
static int serial_tiocmget (struct tty_struct *tty, struct file *file)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -768,7 +768,7 @@ exit:
static int serial_tiocmset (struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -786,7 +786,7 @@ exit:
void usb_serial_port_softint(void *private)
{
- struct usb_serial_port *port = (struct usb_serial_port *)private;
+ struct usb_serial_port *port = private;
struct tty_struct *tty;
dbg("%s - port %d", __FUNCTION__, port->number);
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index f1f1c0608c2..bb9819cc882 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -111,3 +111,15 @@ config USB_STORAGE_JUMPSHOT
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
+
+config USB_STORAGE_ONETOUCH
+ bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
+ depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL
+ help
+ Say Y here to include additional code to support the Maxtor OneTouch
+ USB hard drive's onetouch button.
+
+ This code registers the button on the front of Maxtor OneTouch USB
+ hard drive's as an input device. An action can be associated with
+ this input in any keybinding software. (e.g. gnome's keyboard short-
+ cuts)
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 56652ccc288..44ab8f9978f 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -18,6 +18,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
new file mode 100644
index 00000000000..2c9402dc702
--- /dev/null
+++ b/drivers/usb/storage/onetouch.c
@@ -0,0 +1,210 @@
+/*
+ * Support for the Maxtor OneTouch USB hard drive's button
+ *
+ * Current development and maintenance by:
+ * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
+ *
+ * Initial work by:
+ * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
+ *
+ * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_input.h>
+#include "usb.h"
+#include "onetouch.h"
+#include "debug.h"
+
+void onetouch_release_input(void *onetouch_);
+
+struct usb_onetouch {
+ char name[128];
+ char phys[64];
+ struct input_dev dev; /* input device interface */
+ struct usb_device *udev; /* usb device */
+
+ struct urb *irq; /* urb for interrupt in report */
+ unsigned char *data; /* input data */
+ dma_addr_t data_dma;
+};
+
+static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_onetouch *onetouch = urb->context;
+ signed char *data = onetouch->data;
+ struct input_dev *dev = &onetouch->dev;
+ int status;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ goto resubmit;
+ }
+
+ input_regs(dev, regs);
+
+ input_report_key(&onetouch->dev, ONETOUCH_BUTTON,
+ data[0] & 0x02);
+
+ input_sync(dev);
+resubmit:
+ status = usb_submit_urb (urb, SLAB_ATOMIC);
+ if (status)
+ err ("can't resubmit intr, %s-%s/input0, status %d",
+ onetouch->udev->bus->bus_name,
+ onetouch->udev->devpath, status);
+}
+
+static int usb_onetouch_open(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = dev->private;
+
+ onetouch->irq->dev = onetouch->udev;
+ if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
+ err("usb_submit_urb failed");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void usb_onetouch_close(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = dev->private;
+
+ usb_kill_urb(onetouch->irq);
+}
+
+int onetouch_connect_input(struct us_data *ss)
+{
+ struct usb_device *udev = ss->pusb_dev;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_onetouch *onetouch;
+ int pipe, maxp;
+ char path[64];
+
+ interface = ss->pusb_intf->cur_altsetting;
+
+ if (interface->desc.bNumEndpoints != 3)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[2].desc;
+ if(!(endpoint->bEndpointAddress & USB_DIR_IN))
+ return -ENODEV;
+ if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ != USB_ENDPOINT_XFER_INT)
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+ if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL)))
+ return -ENOMEM;
+
+ onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
+ SLAB_ATOMIC, &onetouch->data_dma);
+ if (!onetouch->data){
+ kfree(onetouch);
+ return -ENOMEM;
+ }
+
+ onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!onetouch->irq){
+ kfree(onetouch);
+ usb_buffer_free(udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ return -ENODEV;
+ }
+
+
+ onetouch->udev = udev;
+
+ set_bit(EV_KEY, onetouch->dev.evbit);
+ set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit);
+ clear_bit(0, onetouch->dev.keybit);
+
+ onetouch->dev.private = onetouch;
+ onetouch->dev.open = usb_onetouch_open;
+ onetouch->dev.close = usb_onetouch_close;
+
+ usb_make_path(udev, path, sizeof(path));
+ sprintf(onetouch->phys, "%s/input0", path);
+
+ onetouch->dev.name = onetouch->name;
+ onetouch->dev.phys = onetouch->phys;
+
+ usb_to_input_id(udev, &onetouch->dev.id);
+
+ onetouch->dev.dev = &udev->dev;
+
+ if (udev->manufacturer)
+ strcat(onetouch->name, udev->manufacturer);
+ if (udev->product)
+ sprintf(onetouch->name, "%s %s", onetouch->name,
+ udev->product);
+ if (!strlen(onetouch->name))
+ sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x",
+ onetouch->dev.id.vendor, onetouch->dev.id.product);
+
+ usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
+ (maxp > 8 ? 8 : maxp),
+ usb_onetouch_irq, onetouch, endpoint->bInterval);
+ onetouch->irq->transfer_dma = onetouch->data_dma;
+ onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ ss->extra_destructor = onetouch_release_input;
+ ss->extra = onetouch;
+
+ input_register_device(&onetouch->dev);
+ printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path);
+
+ return 0;
+}
+
+void onetouch_release_input(void *onetouch_)
+{
+ struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
+
+ if (onetouch) {
+ usb_kill_urb(onetouch->irq);
+ input_unregister_device(&onetouch->dev);
+ usb_free_urb(onetouch->irq);
+ usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ printk(KERN_INFO "usb-input: deregistering %s\n",
+ onetouch->dev.name);
+ }
+}
diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h
new file mode 100644
index 00000000000..41c7aa8f044
--- /dev/null
+++ b/drivers/usb/storage/onetouch.h
@@ -0,0 +1,9 @@
+#ifndef _ONETOUCH_H_
+#define _ONETOUCH_H_
+
+#define ONETOUCH_PKT_LEN 0x02
+#define ONETOUCH_BUTTON KEY_PROG1
+
+int onetouch_connect_input(struct us_data *ss);
+
+#endif
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index af294bb68c3..d34dc9f417f 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -156,6 +156,14 @@ static int slave_configure(struct scsi_device *sdev)
if (us->flags & US_FL_FIX_CAPACITY)
sdev->fix_capacity = 1;
+ /* Some devices report a SCSI revision level above 2 but are
+ * unable to handle the REPORT LUNS command (for which
+ * support is mandatory at level 3). Since we already have
+ * a Get-Max-LUN request, we won't lose much by setting the
+ * revision level down to 2. The only devices that would be
+ * affected are those with sparse LUNs. */
+ sdev->scsi_level = SCSI_2;
+
/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
* recoverable or not. Setting this flag tells the SCSI
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index f3b60288696..356342c6e7a 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -839,34 +839,31 @@ static int usbat_identify_device(struct us_data *us,
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
+ msleep(25);
/*
- * By examining the device signature after a reset, we can identify
- * whether the device supports the ATAPI packet interface.
- * The flash-devices do not support this, whereas the HP CDRW's obviously
- * do.
- *
- * This method is not ideal, but works because no other devices have been
- * produced based on the USBAT/USBAT02.
- *
- * Section 9.1 of the ATAPI-4 spec states (amongst other things) that
- * after a device reset, a Cylinder low of 0x14 indicates that the device
- * does support packet commands.
+ * In attempt to distinguish between HP CDRW's and Flash readers, we now
+ * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
+ * readers), this command should fail with error. On ATAPI devices (i.e.
+ * CDROM drives), it should succeed.
*/
- rc = usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, &status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
+ rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("usbat_identify_device: Cylinder low is %02X\n", status);
+ rc = usbat_get_status(us, &status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
- if (status == 0x14) {
+ // Check for error bit
+ if (status & 0x01) {
+ // Device is a CompactFlash reader/writer
+ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
+ } else {
// Device is HP 8200
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
- } else {
- // Device is a CompactFlash reader/writer
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
- info->devicetype = USBAT_DEV_FLASH;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -1239,16 +1236,10 @@ static int usbat_select_and_test_registers(struct us_data *us)
{
int selector;
unsigned char *status = us->iobuf;
- unsigned char max_selector = 0xB0;
- if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
- max_selector = 0xA0;
// try device = master, then device = slave.
-
- for (selector = 0xA0; selector <= max_selector; selector += 0x10) {
-
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200 &&
- usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
+ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1334,60 +1325,30 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 3\n");
- // At this point, we need to detect which device we are using
- if (usbat_set_transport(us, info))
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 4\n");
-
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200) {
- msleep(250);
-
- // Write 0x80 to ISA port 0x3F
- rc = usbat_write(us, USBAT_ISA, 0x3F, 0x80);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 5\n");
-
- // Read ISA port 0x27
- rc = usbat_read(us, USBAT_ISA, 0x27, status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 6\n");
-
- rc = usbat_read_user_io(us, status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 7\n");
- }
-
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 8\n");
+ US_DEBUGP("INIT 4\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 9\n");
+ US_DEBUGP("INIT 5\n");
// Enable peripheral control signals and card detect
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 10\n");
+ US_DEBUGP("INIT 6\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 11\n");
+ US_DEBUGP("INIT 7\n");
msleep(1400);
@@ -1395,13 +1356,19 @@ int init_usbat(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 12\n");
+ US_DEBUGP("INIT 8\n");
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 13\n");
+ US_DEBUGP("INIT 9\n");
+
+ // At this point, we need to detect which device we are using
+ if (usbat_set_transport(us, info))
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUGP("INIT 10\n");
if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
subcountH = 0x02;
@@ -1412,7 +1379,7 @@ int init_usbat(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 14\n");
+ US_DEBUGP("INIT 11\n");
return USB_STOR_TRANSPORT_GOOD;
}
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index e6b1c6cf07f..c1ba5301ebf 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -96,8 +96,8 @@
* or before the URB_ACTIVE bit was set. If so, it's essential to cancel
* the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit
* is still set). Either way, the function must then wait for the URB to
- * finish. Note that because the URB_ASYNC_UNLINK flag is set, the URB can
- * still be in progress even after a call to usb_unlink_urb() returns.
+ * finish. Note that the URB can still be in progress even after a call to
+ * usb_unlink_urb() returns.
*
* The idea is that (1) once the ABORTING or DISCONNECTING bit is set,
* either the stop_transport() function or the submitting function
@@ -158,8 +158,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
* hasn't been mapped for DMA. Yes, this is clunky, but it's
* easier than always having the caller tell us whether the
* transfer buffer has already been mapped. */
- us->current_urb->transfer_flags =
- URB_ASYNC_UNLINK | URB_NO_SETUP_DMA_MAP;
+ us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP;
if (us->current_urb->transfer_buffer == us->iobuf)
us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
us->current_urb->transfer_dma = us->iobuf_dma;
@@ -611,7 +610,6 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
unsigned char old_sc_data_direction;
unsigned char old_cmd_len;
unsigned char old_cmnd[MAX_COMMAND_SIZE];
- unsigned long old_serial_number;
int old_resid;
US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
@@ -648,10 +646,6 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
old_sg = srb->use_sg;
srb->use_sg = 0;
- /* change the serial number -- toggle the high bit*/
- old_serial_number = srb->serial_number;
- srb->serial_number ^= 0x80000000;
-
/* issue the auto-sense command */
old_resid = srb->resid;
srb->resid = 0;
@@ -662,7 +656,6 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
srb->request_buffer = old_request_buffer;
srb->request_bufflen = old_request_bufflen;
srb->use_sg = old_sg;
- srb->serial_number = old_serial_number;
srb->sc_data_direction = old_sc_data_direction;
srb->cmd_len = old_cmd_len;
memcpy(srb->cmnd, old_cmnd, MAX_COMMAND_SIZE);
@@ -985,7 +978,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = cpu_to_le32(transfer_length);
bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0;
- bcb->Tag = srb->serial_number;
+ bcb->Tag = ++us->tag;
bcb->Lun = srb->device->lun;
if (us->flags & US_FL_SCM_MULT_TARG)
bcb->Lun |= srb->device->id << 4;
@@ -1074,7 +1067,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
le32_to_cpu(bcs->Signature), bcs->Tag,
residue, bcs->Status);
- if (bcs->Tag != srb->serial_number || bcs->Status > US_BULK_STAT_PHASE) {
+ if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
US_DEBUGP("Bulk logical error\n");
return USB_STOR_TRANSPORT_ERROR;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index bd0ab3039bd..ad0cfd7a782 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -79,6 +79,13 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
#endif
+/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
+UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
+ "VIA Technologies Inc.",
+ "USB 2.0 Card Reader",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
@@ -929,6 +936,18 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
US_FL_SINGLE_LUN ),
#endif
+/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ *
+ */
+#ifdef CONFIG_USB_STORAGE_ONETOUCH
+ UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
+ "Maxtor",
+ "OneTouch External Harddrive",
+ US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+ 0),
+#endif
+
/* Submitted by Joris Struyve <joris@struyve.be> */
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
"Medion",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 77e7fc258aa..cb4c770baf3 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -90,7 +90,9 @@
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
-
+#ifdef CONFIG_USB_STORAGE_ONETOUCH
+#include "onetouch.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
@@ -786,6 +788,7 @@ static void usb_stor_release_resources(struct us_data *us)
* any more commands.
*/
US_DEBUGP("-- sending exit command to thread\n");
+ set_bit(US_FLIDX_DISCONNECTING, &us->flags);
up(&us->sema);
/* Call the destructor routine, if it exists */
@@ -816,6 +819,49 @@ static void dissociate_dev(struct us_data *us)
usb_set_intfdata(us->pusb_intf, NULL);
}
+/* First stage of disconnect processing: stop all commands and remove
+ * the host */
+static void quiesce_and_remove_host(struct us_data *us)
+{
+ /* Prevent new USB transfers, stop the current command, and
+ * interrupt a SCSI-scan or device-reset delay */
+ set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+ usb_stor_stop_transport(us);
+ wake_up(&us->delay_wait);
+
+ /* It doesn't matter if the SCSI-scanning thread is still running.
+ * The thread will exit when it sees the DISCONNECTING flag. */
+
+ /* Wait for the current command to finish, then remove the host */
+ down(&us->dev_semaphore);
+ up(&us->dev_semaphore);
+
+ /* queuecommand won't accept any new commands and the control
+ * thread won't execute a previously-queued command. If there
+ * is such a command pending, complete it with an error. */
+ if (us->srb) {
+ us->srb->result = DID_NO_CONNECT << 16;
+ scsi_lock(us_to_host(us));
+ us->srb->scsi_done(us->srb);
+ us->srb = NULL;
+ scsi_unlock(us_to_host(us));
+ }
+
+ /* Now we own no commands so it's safe to remove the SCSI host */
+ scsi_remove_host(us_to_host(us));
+}
+
+/* Second stage of disconnect processing: deallocate all resources */
+static void release_everything(struct us_data *us)
+{
+ usb_stor_release_resources(us);
+ dissociate_dev(us);
+
+ /* Drop our reference to the host; the SCSI core will free it
+ * (and "us" along with it) when the refcount becomes 0. */
+ scsi_host_put(us_to_host(us));
+}
+
/* Thread to carry out delayed SCSI-device scanning */
static int usb_stor_scan_thread(void * __us)
{
@@ -956,7 +1002,7 @@ static int storage_probe(struct usb_interface *intf,
if (result < 0) {
printk(KERN_WARNING USB_STORAGE
"Unable to start the device-scanning thread\n");
- scsi_remove_host(host);
+ quiesce_and_remove_host(us);
goto BadDevice;
}
atomic_inc(&total_threads);
@@ -969,10 +1015,7 @@ static int storage_probe(struct usb_interface *intf,
/* We come here if there are any problems */
BadDevice:
US_DEBUGP("storage_probe() failed\n");
- set_bit(US_FLIDX_DISCONNECTING, &us->flags);
- usb_stor_release_resources(us);
- dissociate_dev(us);
- scsi_host_put(host);
+ release_everything(us);
return result;
}
@@ -982,28 +1025,8 @@ static void storage_disconnect(struct usb_interface *intf)
struct us_data *us = usb_get_intfdata(intf);
US_DEBUGP("storage_disconnect() called\n");
-
- /* Prevent new USB transfers, stop the current command, and
- * interrupt a SCSI-scan or device-reset delay */
- set_bit(US_FLIDX_DISCONNECTING, &us->flags);
- usb_stor_stop_transport(us);
- wake_up(&us->delay_wait);
-
- /* It doesn't matter if the SCSI-scanning thread is still running.
- * The thread will exit when it sees the DISCONNECTING flag. */
-
- /* Wait for the current command to finish, then remove the host */
- down(&us->dev_semaphore);
- up(&us->dev_semaphore);
- scsi_remove_host(us_to_host(us));
-
- /* Wait for everything to become idle and release all our resources */
- usb_stor_release_resources(us);
- dissociate_dev(us);
-
- /* Drop our reference to the host; the SCSI core will free it
- * (and "us" along with it) when the refcount becomes 0. */
- scsi_host_put(us_to_host(us));
+ quiesce_and_remove_host(us);
+ release_everything(us);
}
/***********************************************************************
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 625b7aa9807..a195adae57b 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -158,6 +158,7 @@ struct us_data {
/* SCSI interfaces */
struct scsi_cmnd *srb; /* current srb */
+ unsigned int tag; /* current dCBWTag */
/* thread information */
int pid; /* control thread */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 72463779299..4dbe580f933 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -5,6 +5,7 @@
#include <linux/usb_ch9.h>
#define USB_MAJOR 180
+#define USB_DEVICE_MAJOR 189
#ifdef __KERNEL__
@@ -349,6 +350,7 @@ struct usb_device {
char *manufacturer;
char *serial; /* static strings from the device */
struct list_head filelist;
+ struct class_device *class_dev;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
/*
@@ -614,7 +616,6 @@ extern int usb_disabled(void);
#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */
#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */
#define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */
-#define URB_ASYNC_UNLINK 0x0010 /* usb_unlink_urb() returns asap */
#define URB_NO_FSBR 0x0020 /* UHCI-specific */
#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */
#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */
@@ -722,13 +723,7 @@ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *);
* Initialization:
*
* All URBs submitted must initialize the dev, pipe, transfer_flags (may be
- * zero), and complete fields.
- * The URB_ASYNC_UNLINK transfer flag affects later invocations of
- * the usb_unlink_urb() routine. Note: Failure to set URB_ASYNC_UNLINK
- * with usb_unlink_urb() is deprecated. For synchronous unlinks use
- * usb_kill_urb() instead.
- *
- * All URBs must also initialize
+ * zero), and complete fields. All URBs must also initialize
* transfer_buffer and transfer_buffer_length. They may provide the
* URB_SHORT_NOT_OK transfer flag, indicating that short reads are
* to be treated as errors; that flag is invalid for write requests.
diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h
index 5f5a9d9bd6c..436dd8a2b64 100644
--- a/include/linux/usb_isp116x.h
+++ b/include/linux/usb_isp116x.h
@@ -7,36 +7,18 @@
struct isp116x_platform_data {
/* Enable internal resistors on downstream ports */
unsigned sel15Kres:1;
- /* Chip's internal clock won't be stopped in suspended state.
- Setting/unsetting this bit takes effect only if
- 'remote_wakeup_enable' below is not set. */
- unsigned clknotstop:1;
- /* On-chip overcurrent protection */
+ /* On-chip overcurrent detection */
unsigned oc_enable:1;
/* INT output polarity */
unsigned int_act_high:1;
/* INT edge or level triggered */
unsigned int_edge_triggered:1;
- /* WAKEUP pin connected - NOT SUPPORTED */
- /* unsigned remote_wakeup_connected:1; */
- /* Wakeup by devices on usb bus enabled */
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
unsigned remote_wakeup_enable:1;
- /* Switch or not to switch (keep always powered) */
- unsigned no_power_switching:1;
- /* Ganged port power switching (0) or individual port
- power switching (1) */
- unsigned power_switching_mode:1;
- /* Given port_power, msec/2 after power on till power good */
- u8 potpg;
- /* Hardware reset set/clear. If implemented, this function must:
- if set == 0, deassert chip's HW reset pin
- otherwise, assert chip's HW reset pin */
- void (*reset) (struct device * dev, int set);
- /* Hardware clock start/stop. If implemented, this function must:
- if start == 0, stop the external clock
- otherwise, start the external clock
- */
- void (*clock) (struct device * dev, int start);
/* Inter-io delay (ns). The chip is picky about access timings; it
expects at least:
150ns delay between consecutive accesses to DATA_REG,
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 5aa5fe651a8..bfbec587665 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -735,10 +735,9 @@ static int deactivate_urbs(snd_usb_substream_t *subs, int force, int can_sleep)
if (test_bit(i, &subs->active_mask)) {
if (! test_and_set_bit(i, &subs->unlink_mask)) {
struct urb *u = subs->dataurb[i].urb;
- if (async) {
- u->transfer_flags |= URB_ASYNC_UNLINK;
+ if (async)
usb_unlink_urb(u);
- } else
+ else
usb_kill_urb(u);
}
}
@@ -748,10 +747,9 @@ static int deactivate_urbs(snd_usb_substream_t *subs, int force, int can_sleep)
if (test_bit(i+16, &subs->active_mask)) {
if (! test_and_set_bit(i+16, &subs->unlink_mask)) {
struct urb *u = subs->syncurb[i].urb;
- if (async) {
- u->transfer_flags |= URB_ASYNC_UNLINK;
+ if (async)
usb_unlink_urb(u);
- } else
+ else
usb_kill_urb(u);
}
}