aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/panel/Kconfig290
-rw-r--r--drivers/staging/panel/Makefile1
-rw-r--r--drivers/staging/panel/TODO9
-rw-r--r--drivers/staging/panel/lcd-panel-cgram.txt24
-rw-r--r--drivers/staging/panel/panel.c2343
7 files changed, 2670 insertions, 0 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index a3e361db69f..11d003d37ad 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -77,5 +77,7 @@ source "drivers/staging/comedi/Kconfig"
source "drivers/staging/asus_oled/Kconfig"
+source "drivers/staging/panel/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 06613bb0508..a738bb34c8a 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_RT2860) += rt2860/
obj-$(CONFIG_BENET) += benet/
obj-$(CONFIG_COMEDI) += comedi/
obj-$(CONFIG_ASUS_OLED) += asus_oled/
+obj-$(CONFIG_PANEL) += panel/
diff --git a/drivers/staging/panel/Kconfig b/drivers/staging/panel/Kconfig
new file mode 100644
index 00000000000..7cf65575774
--- /dev/null
+++ b/drivers/staging/panel/Kconfig
@@ -0,0 +1,290 @@
+config PANEL
+ tristate "Parallel port LCD/Keypad Panel support"
+ depends on PARPORT
+ ---help---
+ Say Y here if you have an HD44780 or KS-0074 LCD connected to your
+ parallel port. This driver also features 4 and 6-key keypads, and a
+ 'smartcard' reader. The LCD is accessible through the /dev/lcd char
+ device (10, 156), the keypad through /dev/keypad (10, 185), and the
+ smartcard through /dev/smartcard (10, 186). Both require misc device
+ to be enabled. This code can either be compiled as a module, or linked
+ into the kernel and started at boot. If you don't understand what all
+ this is about, say N.
+
+config PANEL_PARPORT
+ int "Default parallel port number (0=LPT1)"
+ depends on PANEL
+ range 0 255
+ default "0"
+ ---help---
+ This is the index of the parallel port the panel is connected to. One
+ driver instance only supports one parallel port, so if your keypad
+ and LCD are connected to two separate ports, you have to start two
+ modules with different arguments. Numbering starts with '0' for LPT1,
+ and so on.
+
+config PANEL_PROFILE
+ int "Default panel profile (0-5, 0=custom)"
+ depends on PANEL
+ range 0 5
+ default "5"
+ ---help---
+ To ease configuration, the driver supports different configuration
+ profiles for past and recent wirings. These profiles can also be
+ used to define an approximative configuration, completed by a few
+ other options. Here are the profiles :
+
+ 0 = custom (see further)
+ 1 = 2x16 parallel LCD, old keypad
+ 2 = 2x16 serial LCD (KS-0074), new keypad
+ 3 = 2x16 parallel LCD (Hantronix), no keypad
+ 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad
+ 5 = 2x40 parallel LCD (old one), with old keypad
+
+ Custom configurations allow you to define how your display is
+ wired to the parallel port, and how it works. This is only intended
+ for experts.
+
+config PANEL_SMARTCARD
+ depends on PANEL && PANEL_PROFILE="0"
+ bool "Enable smartcard reader (read help!)"
+ default "n"
+ ---help---
+ This enables the 'smartcard' reader as installed on the server at
+ 'www.ant-computing.com'. It was not really a smartcard reader, just
+ a telephone-card reader. It is left here for demonstration and
+ experimentation. If you enable this driver, it will be accessible
+ through character device 10,186.
+
+config PANEL_KEYPAD
+ depends on PANEL && PANEL_PROFILE="0"
+ int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"
+ range 0 4
+ default 0
+ ---help---
+ This enables and configures a keypad connected to the parallel port.
+ The keys will be read from character device 10,185. Valid values are :
+
+ 0 : do not enable this driver
+ 1 : old 6 keys keypad
+ 2 : new 6 keys keypad, as used on the server at www.ant-computing.com
+ 3 : Nexcom NSA1045's 4 keys keypad
+
+ New profiles can be described in the driver source. The driver also
+ supports simultaneous keys pressed when the keypad supports them.
+
+config PANEL_LCD
+ depends on PANEL && PANEL_PROFILE="0"
+ int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"
+ range 0 5
+ default 0
+ ---help---
+ This enables and configures an LCD connected to the parallel port.
+ The driver includes an interpreter for escape codes starting with
+ '\e[L' which are specific to the LCD, and a few ANSI codes. The
+ driver will be registered as character device 10,156, usually
+ under the name '/dev/lcd'. There are a total of 6 supported types :
+
+ 0 : do not enable the driver
+ 1 : custom configuration and wiring (see further)
+ 2 : 2x16 & 2x40 parallel LCD (old wiring)
+ 3 : 2x16 serial LCD (KS-0074 based)
+ 4 : 2x16 parallel LCD (Hantronix wiring)
+ 5 : 2x16 parallel LCD (Nexcom wiring)
+
+ When type '1' is specified, other options will appear to configure
+ more precise aspects (wiring, dimensions, protocol, ...). Please note
+ that those values changed from the 2.4 driver for better consistency.
+
+config PANEL_LCD_HEIGHT
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Number of lines on the LCD (1-2)"
+ range 1 2
+ default 2
+ ---help---
+ This is the number of visible character lines on the LCD in custom profile.
+ It can either be 1 or 2.
+
+config PANEL_LCD_WIDTH
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Number of characters per line on the LCD (1-40)"
+ range 1 40
+ default 40
+ ---help---
+ This is the number of characters per line on the LCD in custom profile.
+ Common values are 16,20,24,40.
+
+config PANEL_LCD_BWIDTH
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Internal LCD line width (1-40, 40 by default)"
+ range 1 40
+ default 40
+ ---help---
+ Most LCDs use a standard controller which supports hardware lines of 40
+ characters, although sometimes only 16, 20 or 24 of them are really wired
+ to the terminal. This results in some non-visible but adressable characters,
+ and is the case for most parallel LCDs. Other LCDs, and some serial ones,
+ however, use the same line width internally as what is visible. The KS0074
+ for example, uses 16 characters per line for 16 visible characters per line.
+
+ This option lets you configure the value used by your LCD in 'custom' profile.
+ If you don't know, put '40' here.
+
+config PANEL_LCD_HWIDTH
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Hardware LCD line width (1-64, 64 by default)"
+ range 1 64
+ default 64
+ ---help---
+ Most LCDs use a single address bit to differentiate line 0 and line 1. Since
+ some of them need to be able to address 40 chars with the lower bits, they
+ often use the immediately superior power of 2, which is 64, to address the
+ next line.
+
+ If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and
+ 64 here for a 2x40.
+
+config PANEL_LCD_CHARSET
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "LCD character set (0=normal, 1=KS0074)"
+ range 0 1
+ default 0
+ ---help---
+ Some controllers such as the KS0074 use a somewhat strange character set
+ where many symbols are at unusual places. The driver knows how to map
+ 'standard' ASCII characters to the character sets used by these controllers.
+ Valid values are :
+
+ 0 : normal (untranslated) character set
+ 1 : KS0074 character set
+
+ If you don't know, use the normal one (0).
+
+config PANEL_LCD_PROTO
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "LCD communication mode (0=parallel 8 bits, 1=serial)"
+ range 0 1
+ default 0
+ ---help---
+ This driver now supports any serial or parallel LCD wired to a parallel
+ port. But before assigning signals, the driver needs to know if it will
+ be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
+ (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals
+ (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits
+ parallel LCD, and 1 for a serial LCD.
+
+config PANEL_LCD_PIN_E
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
+ range -17 17
+ default 14
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'E'
+ signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'E' pin in custom profile is '14' (AUTOFEED).
+
+config PANEL_LCD_PIN_RS
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
+ range -17 17
+ default 17
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'RS'
+ signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'RS' pin in custom profile is '17' (SELECT IN).
+
+config PANEL_LCD_PIN_RW
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
+ range -17 17
+ default 16
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'RW'
+ signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'RW' pin in custom profile is '16' (INIT).
+
+config PANEL_LCD_PIN_SCL
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
+ int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
+ range -17 17
+ default 1
+ ---help---
+ This describes the number of the parallel port pin to which the serial
+ LCD 'SCL' signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'SCL' pin in custom profile is '1' (STROBE).
+
+config PANEL_LCD_PIN_SDA
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
+ int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
+ range -17 17
+ default 2
+ ---help---
+ This describes the number of the parallel port pin to which the serial
+ LCD 'SDA' signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'SDA' pin in custom profile is '2' (D0).
+
+config PANEL_LCD_PIN_BL
+ depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
+ range -17 17
+ default 0
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'BL' signal
+ has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'BL' pin in custom profile is '0' (uncontrolled).
+
+config PANEL_CHANGE_MESSAGE
+ depends on PANEL
+ bool "Change LCD initialization message ?"
+ default "n"
+ ---help---
+ This allows you to replace the boot message indicating the kernel version
+ and the driver version with a custom message. This is useful on appliances
+ where a simple 'Starting system' message can be enough to stop a customer
+ from worrying.
+
+ If you say 'Y' here, you'll be able to choose a message yourself. Otherwise,
+ say 'N' and keep the default message with the version.
+
+config PANEL_BOOT_MESSAGE
+ depends on PANEL && PANEL_CHANGE_MESSAGE="y"
+ string "New initialization message"
+ default ""
+ ---help---
+ This allows you to replace the boot message indicating the kernel version
+ and the driver version with a custom message. This is useful on appliances
+ where a simple 'Starting system' message can be enough to stop a customer
+ from worrying.
+
+ An empty message will only clear the display at driver init time. Any other
+ printf()-formatted message is valid with newline and escape codes.
diff --git a/drivers/staging/panel/Makefile b/drivers/staging/panel/Makefile
new file mode 100644
index 00000000000..747c238b82f
--- /dev/null
+++ b/drivers/staging/panel/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PANEL) += panel.o
diff --git a/drivers/staging/panel/TODO b/drivers/staging/panel/TODO
new file mode 100644
index 00000000000..a4be749bcdf
--- /dev/null
+++ b/drivers/staging/panel/TODO
@@ -0,0 +1,9 @@
+TODO:
+ - checkpatch.pl cleanups
+ - Lindent
+ - review major/minor usages
+ - review userspace api
+ - see if all of this could be easier done in userspace instead.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
+Willy Tarreau <willy@meta-x.org>
diff --git a/drivers/staging/panel/lcd-panel-cgram.txt b/drivers/staging/panel/lcd-panel-cgram.txt
new file mode 100644
index 00000000000..f9ceef4322a
--- /dev/null
+++ b/drivers/staging/panel/lcd-panel-cgram.txt
@@ -0,0 +1,24 @@
+Some LCDs allow you to define up to 8 characters, mapped to ASCII
+characters 0 to 7. The escape code to define a new character is
+'\e[LG' followed by one digit from 0 to 7, representing the character
+number, and up to 8 couples of hex digits terminated by a semi-colon
+(';'). Each couple of digits represents a line, with 1-bits for each
+illuminated pixel with LSB on the right. Lines are numberred from the
+top of the character to the bottom. On a 5x7 matrix, only the 5 lower
+bits of the 7 first bytes are used for each character. If the string
+is incomplete, only complete lines will be redefined. Here are some
+examples :
+
+ printf "\e[LG0010101050D1F0C04;" => 0 = [enter]
+ printf "\e[LG1040E1F0000000000;" => 1 = [up]
+ printf "\e[LG2000000001F0E0400;" => 2 = [down]
+ printf "\e[LG3040E1F001F0E0400;" => 3 = [up-down]
+ printf "\e[LG40002060E1E0E0602;" => 4 = [left]
+ printf "\e[LG500080C0E0F0E0C08;" => 5 = [right]
+ printf "\e[LG60016051516141400;" => 6 = "IP"
+
+ printf "\e[LG00103071F1F070301;" => big speaker
+ printf "\e[LG00002061E1E060200;" => small speaker
+
+Willy
+
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
new file mode 100644
index 00000000000..e021f5c4e07
--- /dev/null
+++ b/drivers/staging/panel/panel.c
@@ -0,0 +1,2343 @@
+/*
+ * Front panel driver for Linux - 20000810 - Willy Tarreau - willy@meta-x.org.
+ * It includes and LCD display (/dev/lcd), a 4-key keypad (/dev/keypad), and a
+ * smart card reader (/dev/smartcard).
+ *
+ * Updates for this driver may be found here :
+ *
+ * http://w.ods.org/linux/kernel/lcdpanel/
+ *
+ * the driver skeleton has been stolen from nvram.c which was clearly written.
+ *
+ * Changes:
+ * 2000/08/10
+ * - keypad now scrolls LCD when not opened
+ * - released 0.5.1
+ * 2000/08/10
+ * - bug fixes
+ * - released 0.5.2
+ * 2000/08/10
+ * - Reposition LCD when opening /dev/keypad (WIP)
+ * - Released 0.5.3
+ * 2001/02/04
+ * - Start of port to kernel 2.4.1
+ * 2001/03/11
+ * - implementation of a 24-key keyboard scanner with less electronics
+ * around, thus allowing to release the IRQ line.
+ * 2001/03/25
+ * - the driver now compiles and works with both 2.4.2 and 2.2.18 kernels
+ * 2001/04/22
+ * - implementation of KS0074-based serial LCD (load with lcd_enabled=2 and lcd_hwidth=16)
+ * 2001/04/29
+ * - added back-light support, released 0.7.1
+ * 2001/05/01
+ * - added charset conversion table for ks0074, released 0.7.2
+ * 2001/05/08
+ * - start of rewriting towards v0.8
+ * 2001/10/21
+ * - replaced linux/malloc.h with linux/slab.h to be 2.4 compliant
+ * - definition of the multi-layer input system with its naming scheme
+ * - profile support for simplified configuration
+ * 2001/10/28
+ * - smartcard now works for telecards. /dev/smartcard returns the card serial number
+ * 2001/11/10
+ * - fix too short sleep for lcd_clear
+ * 2004/05/09
+ * - add support for hantronix LCD modules (RS on SELECTIN instead of AUTOLF)
+ * (load with lcd_enabled=3 or profile=3)
+ * 2004/06/04
+ * - changed all parallel LCD functions to be more generic. Now any
+ * connection of control signal is allowed with lcd_*_pin.
+ * 2004/07/23
+ * - cleaned up some code
+ * - added support for keypads with inverted inputs
+ * - added support for Nexcom's LCD/Keypad on profile 4
+ * - added character generator for chars 0-7 : "\e[LG{0-7}{8*2 hexdigits};"
+ * 2004/07/29 : 0.9.0
+ * - deprecated lcd_enabled and keypad_enabled in profit of *_type
+ * - changed configuration so that the user can choose everything at
+ * kernel compilation time
+ * 2004/07/31 : 0.9.2
+ * - fixed a stupid copy-paste bug affecting only the serial LCD
+ * - moved display geometries to lcd_init() to avoid problems with custom profiles.
+ * 2004/08/06 : 0.9.3
+ * - added a system notifier callback to print the system state on the LCD
+ * during reboots or halts.
+ *
+ * 2005/05/20 : 0.9.4
+ * - first working port on kernel 2.6
+ *
+ * 2006/12/18 : 0.9.5
+ * - fixed a long standing bug in 2.6 causing panics during reboot/kexec
+ * if the LCD was enabled but not initialized due to lack of parport.
+ *
+ * FIXME:
+ * - the initialization/deinitialization process is very dirty and should
+ * be rewritten. It may even be buggy.
+ *
+ * TODO:
+ * - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs)
+ * - make the LCD a part of a virtual screen of Vx*Vy
+ * - make the inputs list smp-safe
+ * - change the keyboard to a double mapping : signals -> key_id -> values
+ * so that applications can change values without knowing signals
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h> // previously <linux/malloc.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/parport.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/utsrelease.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+/* smartcard length */
+#define SMARTCARD_BYTES 64
+#define LCD_MINOR 156
+#define KEYPAD_MINOR 185
+#define SMARTCARD_MINOR 186
+
+#define PANEL_VERSION "0.9.5"
+
+#define LCD_MAXBYTES 256 /* max burst write */
+
+#define SMARTCARD_LOGICAL_DETECTOR "S6" /* D6 wired to SELECT = card inserted */
+
+#define KEYPAD_BUFFER 64
+#define INPUT_POLL_TIME (HZ/50) /* poll the keyboard this every second */
+#define KEYPAD_REP_START (10) /* a key starts to repeat after this times INPUT_POLL_TIME */
+#define KEYPAD_REP_DELAY (2) /* a key repeats this times INPUT_POLL_TIME */
+
+#define FLASH_LIGHT_TEMPO (200) /* keep the light on this times INPUT_POLL_TIME for each flash */
+
+/* converts an r_str() input to an active high, bits string : 000BAOSE */
+#define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3)
+
+#define PNL_PBUSY 0x80 /* inverted input, active low */
+#define PNL_PACK 0x40 /* direct input, active low */
+#define PNL_POUTPA 0x20 /* direct input, active high */
+#define PNL_PSELECD 0x10 /* direct input, active high */
+#define PNL_PERRORP 0x08 /* direct input, active low */
+
+#define PNL_PBIDIR 0x20 /* bi-directional ports */
+#define PNL_PINTEN 0x10 /* high to read data in or-ed with data out */
+#define PNL_PSELECP 0x08 /* inverted output, active low */
+#define PNL_PINITP 0x04 /* direct output, active low */
+#define PNL_PAUTOLF 0x02 /* inverted output, active low */
+#define PNL_PSTROBE 0x01 /* inverted output */
+
+#define PNL_PD0 0x01
+#define PNL_PD1 0x02
+#define PNL_PD2 0x04
+#define PNL_PD3 0x08
+#define PNL_PD4 0x10
+#define PNL_PD5 0x20
+#define PNL_PD6 0x40
+#define PNL_PD7 0x80
+
+#define PIN_NONE 0
+#define PIN_STROBE 1
+#define PIN_D0 2
+#define PIN_D1 3
+#define PIN_D2 4
+#define PIN_D3 5
+#define PIN_D4 6
+#define PIN_D5 7
+#define PIN_D6 8
+#define PIN_D7 9
+#define PIN_AUTOLF 14
+#define PIN_INITP 16
+#define PIN_SELECP 17
+#define PIN_NOT_SET 127
+
+/* some smartcard-specific signals */
+#define PNL_SC_IO PNL_PD1 /* Warning! inverted output, 0=highZ */
+#define PNL_SC_RST PNL_PD2
+#define PNL_SC_CLK PNL_PD3
+#define PNL_SC_RW PNL_PD4
+#define PNL_SC_ENA PNL_PINITP
+#define PNL_SC_IOR PNL_PACK
+#define PNL_SC_BITS (PNL_SC_IO | PNL_SC_RST | PNL_SC_CLK | PNL_SC_RW)
+
+#define LCD_FLAG_S 0x0001
+#define LCD_FLAG_ID 0x0002
+#define LCD_FLAG_B 0x0004 /* blink on */
+#define LCD_FLAG_C 0x0008 /* cursor on */
+#define LCD_FLAG_D 0x0010 /* display on */
+#define LCD_FLAG_F 0x0020 /* large font mode */
+#define LCD_FLAG_N 0x0040 /* 2-rows mode */
+#define LCD_FLAG_L 0x0080 /* backlight enabled */
+
+#define LCD_ESCAPE_LEN 24 /* 24 chars max for an LCD escape command */
+#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */
+
+/* macros to simplify use of the parallel port */
+#define r_ctr(x) (parport_read_control((x)->port))
+#define r_dtr(x) (parport_read_data((x)->port))
+#define r_str(x) (parport_read_status((x)->port))
+#define w_ctr(x,y) do { parport_write_control((x)->port, (y)); } while (0)
+#define w_dtr(x,y) do { parport_write_data((x)->port, (y)); } while (0)
+
+/* this defines which bits are to be used and which ones to be ignored */
+static __u8 scan_mask_o = 0; /* logical or of the output bits involved in the scan matrix */
+static __u8 scan_mask_i = 0; /* logical or of the input bits involved in the scan matrix */
+
+typedef __u64 pmask_t;
+
+enum input_type {
+ INPUT_TYPE_STD,
+ INPUT_TYPE_KBD,
+};
+
+enum input_state {
+ INPUT_ST_LOW,
+ INPUT_ST_RISING,
+ INPUT_ST_HIGH,
+ INPUT_ST_FALLING,
+};
+
+struct logical_input {
+ struct list_head list;
+ pmask_t mask;
+ pmask_t value;
+ enum input_type type;
+ enum input_state state;
+ __u8 rise_time, fall_time;
+ __u8 rise_timer, fall_timer, high_timer;
+
+ union {
+ struct { /* this structure is valid when type == INPUT_TYPE_STD */
+ void(*press_fct)(int);
+ void(*release_fct)(int);
+ int press_data;
+ int release_data;
+ } std;
+ struct { /* this structure is valid when type == INPUT_TYPE_KBD */
+ /* strings can be full-length (ie. non null-terminated) */
+ char press_str[sizeof(void *) + sizeof (int)];
+ char repeat_str[sizeof(void *) + sizeof (int)];
+ char release_str[sizeof(void *) + sizeof (int)];
+ } kbd;
+ } u;
+};
+
+LIST_HEAD(logical_inputs); /* list of all defined logical inputs */
+
+/* physical contacts history
+ * Physical contacts are a 45 bits string of 9 groups of 5 bits each.
+ * The 8 lower groups correspond to output bits 0 to 7, and the 9th group
+ * corresponds to the ground.
+ * Within each group, bits are stored in the same order as read on the port :
+ * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0).
+ * So, each __u64 (or pmask_t) is represented like this :
+ * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE
+ * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00>
+ */
+static pmask_t phys_read; /* what has just been read from the I/O ports */
+static pmask_t phys_read_prev; /* previous phys_read */
+static pmask_t phys_curr; /* stabilized phys_read (phys_read|phys_read_prev) */
+static pmask_t phys_prev; /* previous phys_curr */
+static char inputs_stable = 0; /* 0 means that at least one logical signal needs be computed */
+
+/* these variables are specific to the smartcard */
+static __u8 smartcard_data[SMARTCARD_BYTES];
+static int smartcard_ptr = 0; /* pointer to half bytes in smartcard_data */
+
+/* these variables are specific to the keypad */
+static char keypad_buffer[KEYPAD_BUFFER];
+static int keypad_buflen = 0;
+static int keypad_start = 0;
+static char keypressed = 0;
+static wait_queue_head_t keypad_read_wait;
+static wait_queue_head_t smartcard_read_wait;
+
+/* lcd-specific variables */
+static unsigned long int lcd_flags = 0; /* contains the LCD config state */
+static unsigned long int lcd_addr_x = 0; /* contains the LCD X offset */
+static unsigned long int lcd_addr_y = 0; /* contains the LCD Y offset */
+static char lcd_escape[LCD_ESCAPE_LEN+1]; /* current escape sequence, 0 terminated */
+static int lcd_escape_len = -1; /* not in escape state. >=0 = escape cmd len */
+
+static int lcd_height = -1;
+static int lcd_width = -1;
+static int lcd_hwidth = -1; /* hardware buffer width (usually 64) */
+static int lcd_bwidth = -1; /* internal buffer width (usually 40) */
+
+/*
+ * These are the parallel port pins the LCD control signals are connected to.
+ * Set this to 0 if the signal is not used. Set it to its opposite value
+ * (negative) if the signal is negated. -MAXINT is used to indicate that the
+ * pin has not been explicitly specified.
+ *
+ * WARNING! no check will be performed about collisions with keypad/smartcard !
+ */
+static int lcd_e_pin = PIN_NOT_SET;
+static int lcd_rs_pin = PIN_NOT_SET;
+static int lcd_rw_pin = PIN_NOT_SET;
+static int lcd_bl_pin = PIN_NOT_SET;
+static int lcd_cl_pin = PIN_NOT_SET;
+static int lcd_da_pin = PIN_NOT_SET;
+
+/*
+ * Bit masks to convert LCD signals to parallel port outputs.
+ * _d_ are values for data port, _c_ are for control port.
+ * [0] = signal OFF, [1] = signal ON, [2] = mask
+ */
+#define BIT_CLR 0
+#define BIT_SET 1
+#define BIT_MSK 2
+#define BIT_STATES 3
+/*
+ * one entry for each bit on the LCD
+ */
+#define LCD_BIT_E 0
+#define LCD_BIT_RS 1
+#define LCD_BIT_RW 2
+#define LCD_BIT_BL 3
+#define LCD_BIT_CL 4
+#define LCD_BIT_DA 5
+#define LCD_BITS 6
+
+/*
+ * each bit can be either connected to a DATA or CTRL port
+ */
+#define LCD_PORT_C 0
+#define LCD_PORT_D 1
+#define LCD_PORTS 2
+
+static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];
+
+/*
+ * LCD protocols
+ */
+#define LCD_PROTO_PARALLEL 0
+#define LCD_PROTO_SERIAL 1
+
+/*
+ * LCD character sets
+ */
+#define LCD_CHARSET_NORMAL 0
+#define LCD_CHARSET_KS0074 1
+
+/*
+ * LCD types
+ */
+#define LCD_TYPE_NONE 0
+#define LCD_TYPE_OLD 1
+#define LCD_TYPE_KS0074 2
+#define LCD_TYPE_HANTRONIX 3
+#define LCD_TYPE_NEXCOM 4
+#define LCD_TYPE_CUSTOM 5
+
+/*
+ * keypad types
+ */
+#define KEYPAD_TYPE_NONE 0
+#define KEYPAD_TYPE_OLD 1
+#define KEYPAD_TYPE_NEW 2
+#define KEYPAD_TYPE_NEXCOM 3
+
+/*
+ * panel profiles
+ */
+#define PANEL_PROFILE_CUSTOM 0
+#define PANEL_PROFILE_OLD 1
+#define PANEL_PROFILE_NEW 2
+#define PANEL_PROFILE_HANTRONIX 3
+#define PANEL_PROFILE_NEXCOM 4
+#define PANEL_PROFILE_LARGE 5
+
+/*
+ * Construct custom config from the kernel's configuration
+ */
+#define DEFAULT_PROFILE PANEL_PROFILE_LARGE
+#define DEFAULT_PARPORT 0
+#define DEFAULT_LCD LCD_TYPE_OLD
+#define DEFAULT_KEYPAD KEYPAD_TYPE_OLD
+#define DEFAULT_SMARTCARD 0
+#define DEFAULT_LCD_WIDTH 40
+#define DEFAULT_LCD_BWIDTH 40
+#define DEFAULT_LCD_HWIDTH 64
+#define DEFAULT_LCD_HEIGHT 2
+#define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL
+
+#define DEFAULT_LCD_PIN_E PIN_AUTOLF
+#define DEFAULT_LCD_PIN_RS PIN_SELECP
+#define DEFAULT_LCD_PIN_RW PIN_INITP
+#define DEFAULT_LCD_PIN_SCL PIN_STROBE
+#define DEFAULT_LCD_PIN_SDA PIN_D0
+#define DEFAULT_LCD_PIN_BL PIN_NOT_SET
+#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL
+
+#ifdef CONFIG_PANEL_PROFILE
+#undef DEFAULT_PROFILE
+#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
+#endif
+
+#ifdef CONFIG_PANEL_PARPORT
+#undef DEFAULT_PARPORT
+#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT
+#endif
+
+#if DEFAULT_PROFILE==0 /* custom */
+#ifdef CONFIG_PANEL_KEYPAD
+#undef DEFAULT_KEYPAD
+#define DEFAULT_KEYPAD CONFIG_PANEL_KEYPAD
+#endif
+
+#ifdef CONFIG_PANEL_SMARTCARD
+#undef DEFAULT_SMARTCARD
+#define DEFAULT_SMARTCARD 1
+#endif
+
+#ifdef CONFIG_PANEL_LCD
+#undef DEFAULT_LCD
+#define DEFAULT_LCD CONFIG_PANEL_LCD
+#endif
+
+#ifdef CONFIG_PANEL_LCD_WIDTH
+#undef DEFAULT_LCD_WIDTH
+#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH
+#endif
+
+#ifdef CONFIG_PANEL_LCD_BWIDTH
+#undef DEFAULT_LCD_BWIDTH
+#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH
+#endif
+
+#ifdef CONFIG_PANEL_LCD_HWIDTH
+#undef DEFAULT_LCD_HWIDTH
+#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH
+#endif
+
+#ifdef CONFIG_PANEL_LCD_HEIGHT
+#undef DEFAULT_LCD_HEIGHT
+#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PROTO
+#undef DEFAULT_LCD_PROTO
+#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_E
+#undef DEFAULT_LCD_PIN_E
+#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_RS
+#undef DEFAULT_LCD_PIN_RS
+#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_RW
+#undef DEFAULT_LCD_PIN_RW
+#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_SCL
+#undef DEFAULT_LCD_PIN_SCL
+#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_SDA
+#undef DEFAULT_LCD_PIN_SDA
+#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_BL
+#undef DEFAULT_LCD_PIN_BL
+#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL
+#endif
+
+#ifdef CONFIG_PANEL_LCD_CHARSET
+#undef DEFAULT_LCD_CHARSET
+#define DEFAULT_LCD_CHARSET
+#endif
+
+#endif /* DEFAULT_PROFILE == 0 */
+
+/* global variables */
+static int smartcard_open_cnt = 0; /* #times opened */
+static int keypad_open_cnt = 0; /* #times opened */
+static int lcd_open_cnt = 0; /* #times opened */
+
+static int profile = DEFAULT_PROFILE;
+static struct pardevice *pprt = NULL;
+static int parport = -1;
+static int lcd_enabled = -1;
+static int lcd_type = -1;
+static int lcd_proto = -1;
+static int lcd_charset = -1;
+static int keypad_enabled = -1;
+static int keypad_type = -1;
+static int smartcard_enabled = -1;
+
+static int lcd_initialized, keypad_initialized, smartcard_initialized;
+
+static int light_tempo = 0;
+
+static char lcd_must_clear = 0;
+static char lcd_left_shift = 0;
+static char init_in_progress = 0;
+
+static void(*lcd_write_cmd)(int) = NULL;
+static void(*lcd_write_data)(int) = NULL;
+static void(*lcd_clear_fast)(void) = NULL;
+
+static spinlock_t pprt_lock = SPIN_LOCK_UNLOCKED;
+static struct timer_list scan_timer;
+
+#ifdef MODULE
+
+MODULE_DESCRIPTION("Generic parallel port LCD/Keypad/Smartcard driver");
+module_param(parport, int, 0000);MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)");
+module_param(lcd_height, int, 0000);MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD");
+module_param(lcd_width, int, 0000);MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD");
+module_param(lcd_bwidth, int, 0000);MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)");
+module_param(lcd_hwidth, int, 0000);MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)");
+module_param(lcd_enabled, int, 0000);MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");
+module_param(keypad_enabled, int, 0000);MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
+module_param(lcd_type, int, 0000);MODULE_PARM_DESC(lcd_type, "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");
+module_param(lcd_proto, int, 0000);MODULE_PARM_DESC(lcd_proto, "LCD communication: 0=parallel (//), 1=serial");
+module_param(lcd_charset, int, 0000);MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
+module_param(keypad_type, int, 0000);MODULE_PARM_DESC(keypad_type, "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
+module_param(smartcard_enabled, int, 0000);MODULE_PARM_DESC(smartcard_enabled, "Smartcard reader: 0=disabled (default), 1=enabled");
+module_param(profile, int, 0000); MODULE_PARM_DESC(profile, "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; 4=16x2 nexcom; default=40x2, old kp");
+
+module_param(lcd_e_pin, int, 0000); MODULE_PARM_DESC(lcd_e_pin, "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");
+module_param(lcd_rs_pin, int, 0000);MODULE_PARM_DESC(lcd_rs_pin, "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)");
+module_param(lcd_rw_pin, int, 0000);MODULE_PARM_DESC(lcd_rw_pin, "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");
+module_param(lcd_bl_pin, int, 0000);MODULE_PARM_DESC(lcd_bl_pin, "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+module_param(lcd_da_pin, int, 0000);MODULE_PARM_DESC(lcd_da_pin, "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");
+module_param(lcd_cl_pin, int, 0000);MODULE_PARM_DESC(lcd_cl_pin, "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
+
+#endif
+
+static unsigned char *lcd_char_conv = NULL;
+
+/* for some LCD drivers (ks0074) we need a charset conversion table. */
+static unsigned char lcd_char_conv_ks0074[256] = {
+ /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */
+ /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4,
+ /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+ /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20,
+ /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
+ /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
+ /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f, 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96,
+ /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd, 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60,
+ /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9, 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3,
+ /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78, 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe,
+ /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8, 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69,
+ /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25, 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79,
+};
+
+char old_keypad_profile[][4][9] = {
+ {"S0", "Left\n", "Left\n", ""},
+ {"S1", "Down\n", "Down\n", ""},
+ {"S2", "Up\n", "Up\n", ""},
+ {"S3", "Right\n", "Right\n", ""},
+ {"S4", "Esc\n", "Esc\n", ""},
+ {"S5", "Ret\n", "Ret\n", ""},
+ {"","","",""}
+};
+
+/* signals, press, repeat, release */
+char new_keypad_profile[][4][9] = {
+ {"S0", "Left\n", "Left\n", ""},
+ {"S1", "Down\n", "Down\n", ""},
+ {"S2", "Up\n", "Up\n", ""},
+ {"S3", "Right\n", "Right\n", ""},
+ {"S4s5", "", "Esc\n", "Esc\n"},
+ {"s4S5", "", "Ret\n", "Ret\n"},
+ {"S4S5", "Help\n", "", ""},
+ /* add new signals above this line */
+ {"","","",""}
+};
+
+/* signals, press, repeat, release */
+char nexcom_keypad_profile[][4][9] = {
+ {"a-p-e-", "Down\n", "Down\n", ""}, // Down
+ {"a-p-E-", "Ret\n", "Ret\n", ""}, // Enter
+ {"a-P-E-", "Esc\n", "Esc\n", ""}, // Esc
+ {"a-P-e-", "Up\n", "Up\n", ""}, // Up
+ /* add new signals above this line */
+ {"","","",""}
+};
+
+static char (*keypad_profile)[4][9] = old_keypad_profile;
+
+/* FIXME: this should be converted to a bit array containing signals states */
+static struct {
+ unsigned char e; /* parallel LCD E (data latch on falling edge) */
+ unsigned char rs; /* parallel LCD RS (0 = cmd, 1 = data) */
+ unsigned char rw; /* parallel LCD R/W (0 = W, 1 = R) */
+ unsigned char bl; /* parallel LCD backlight (0 = off, 1 = on) */
+ unsigned char cl; /* serial LCD clock (latch on rising edge) */
+ unsigned char da; /* serial LCD data */
+} bits;
+
+static void init_scan_timer(void);
+
+/* sets data port bits according to current signals values */
+static int set_data_bits(void) {
+ int val, bit;
+
+ val = r_dtr(pprt);
+ for (bit = 0; bit < LCD_BITS; bit++)
+ val &= lcd_bits[LCD_PORT_D][bit][BIT_MSK];
+
+ val |= lcd_bits[LCD_PORT_D][LCD_BIT_E][bits.e]
+ | lcd_bits[LCD_PORT_D][LCD_BIT_RS][bits.rs]
+ | lcd_bits[LCD_PORT_D][LCD_BIT_RW][bits.rw]
+ | lcd_bits[LCD_PORT_D][LCD_BIT_BL][bits.bl]
+ | lcd_bits[LCD_PORT_D][LCD_BIT_CL][bits.cl]
+ | lcd_bits[LCD_PORT_D][LCD_BIT_DA][bits.da];
+
+ w_dtr(pprt, val);
+ return val;
+}
+
+/* sets ctrl port bits according to current signals values */
+static int set_ctrl_bits(void) {
+ int val, bit;
+
+ val = r_ctr(pprt);
+ for (bit = 0; bit < LCD_BITS; bit++)
+ val &= lcd_bits[LCD_PORT_C][bit][BIT_MSK];
+
+ val |= lcd_bits[LCD_PORT_C][LCD_BIT_E][bits.e]
+ | lcd_bits[LCD_PORT_C][LCD_BIT_RS][bits.rs]
+ | lcd_bits[LCD_PORT_C][LCD_BIT_RW][bits.rw]
+ | lcd_bits[LCD_PORT_C][LCD_BIT_BL][bits.bl]
+ | lcd_bits[LCD_PORT_C][LCD_BIT_CL][bits.cl]
+ | lcd_bits[LCD_PORT_C][LCD_BIT_DA][bits.da];
+
+ w_ctr(pprt, val);
+ return val;
+}
+
+/* sets ctrl & data port bits according to current signals values */
+static void set_bits(void) {
+ set_data_bits();
+ set_ctrl_bits();
+}
+
+/*
+ * Converts a parallel port pin (from -25 to 25) to data and control ports
+ * masks, and data and control port bits. The signal will be considered
+ * unconnected if it's on pin 0 or an invalid pin (<-25 or >25).
+ *
+ * Result will be used this way :
+ * out(dport, in(dport) & d_val[2] | d_val[signal_state])
+ * out(cport, in(cport) & c_val[2] | c_val[signal_state])
+ */
+void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val) {
+ int d_bit, c_bit, inv;
+
+ d_val[0] = c_val[0] = d_val[1] = c_val[1] = 0;
+ d_val[2] = c_val[2] = 0xFF;
+
+ if (pin == 0)
+ return;
+
+ inv = (pin < 0);
+ if (inv)
+ pin = -pin;
+
+ d_bit = c_bit = 0;
+
+ switch (pin) {
+ case PIN_STROBE: /* strobe, inverted */
+ c_bit = PNL_PSTROBE;
+ inv = !inv;
+ break;
+ case PIN_D0 ... PIN_D7: /* D0 - D7 = 2 - 9 */
+ d_bit = 1 << (pin - 2);
+ break;
+ case PIN_AUTOLF: /* autofeed, inverted */
+ c_bit = PNL_PAUTOLF;
+ inv = !inv;
+ break;
+ case PIN_INITP: /* init, direct */
+ c_bit = PNL_PINITP;
+ break;
+ case PIN_SELECP: /* select_in, inverted */
+ c_bit = PNL_PSELECP;
+ inv = !inv;
+ break;
+ default: /* unknown pin, ignore */
+ break;
+ }
+
+ if (c_bit) {
+ c_val[2] &= ~c_bit;
+ c_val[!inv] = c_bit;
+ } else if (d_bit) {
+ d_val[2] &= ~d_bit;
+ d_val[!inv] = d_bit;
+ }
+}
+
+/* sleeps that many milliseconds with a reschedule */
+static void long_sleep(int ms) {
+
+ if (in_interrupt())
+ mdelay(ms);
+ else {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout((ms*HZ+999)/1000);
+ }
+}
+
+
+/* send a serial byte to the LCD panel. The caller is responsible for locking if needed. */
+static void lcd_send_serial(int byte) {
+ int bit;
+
+ /* the data bit is set on D0, and the clock on STROBE.
+ * LCD reads D0 on STROBE's rising edge.
+ */
+ for (bit = 0; bit < 8; bit++) {
+ bits.cl = BIT_CLR; /* CLK low */
+ set_bits();
+ bits.da = byte & 1;
+ set_bits();
+ udelay(2); /* maintain the data during 2 us before CLK up */
+ bits.cl = BIT_SET; /* CLK high */
+ set_bits();
+ udelay(1); /* maintain the strobe during 1 us */
+ byte >>= 1;
+ }
+}
+
+/* turn the backlight on or off */
+static void lcd_backlight(int on) {
+ if (lcd_bl_pin == PIN_NONE)
+ return;
+
+ /* The backlight is activated by seting the AUTOFEED line to +5V */
+ spin_lock(&pprt_lock);
+ bits.bl = on;
+ set_bits();
+ spin_unlock(&pprt_lock);
+}
+
+/* send a command to the LCD panel in serial mode */
+static void lcd_write_cmd_s(int cmd) {
+ spin_lock(&pprt_lock);
+ lcd_send_serial(0x1F); /* R/W=W, RS=0 */
+ lcd_send_serial(cmd & 0x0F);
+ lcd_send_serial((cmd >> 4) & 0x0F);
+ udelay(40); /* the shortest command takes at least 40 us */
+ spin_unlock(&pprt_lock);
+}
+
+/* send data to the LCD panel in serial mode */
+static void lcd_write_data_s(int data) {
+ spin_lock(&pprt_lock);
+ lcd_send_serial(0x5F); /* R/W=W, RS=1 */
+ lcd_send_serial(data & 0x0F);
+ lcd_send_serial((data >> 4) & 0x0F);
+ udelay(40); /* the shortest data takes at least 40 us */
+ spin_unlock(&pprt_lock);
+}
+
+/* send a command to the LCD panel in 8 bits parallel mode */
+static void lcd_write_cmd_p8(int cmd) {
+ spin_lock(&pprt_lock);
+ /* present the data to the data port */
+ w_dtr(pprt, cmd);
+ udelay(20); /* maintain the data during 20 us before the strobe */
+
+ bits.e = BIT_SET ; bits.rs = BIT_CLR ; bits.rw = BIT_CLR;
+ set_ctrl_bits();
+
+ udelay(40); /* maintain the strobe during 40 us */
+
+ bits.e = BIT_CLR;
+ set_ctrl_bits();
+
+ udelay(120); /* the shortest command takes at least 120 us */
+ spin_unlock(&pprt_lock);
+}
+
+/* send data to the LCD panel in 8 bits parallel mode */
+static void lcd_write_data_p8(int data) {
+ spin_lock(&pprt_lock);
+ /* present the data to the data port */
+ w_dtr(pprt, data);
+ udelay(20); /* maintain the data during 20 us before the strobe */
+
+ bits.e = BIT_SET ; bits.rs = BIT_SET ; bits.rw = BIT_CLR;
+ set_ctrl_bits();
+
+ udelay(40); /* maintain the strobe during 40 us */
+
+ bits.e = BIT_CLR;
+ set_ctrl_bits();
+
+ udelay(45); /* the shortest data takes at least 45 us */
+ spin_unlock(&pprt_lock);
+}
+
+static void lcd_gotoxy(void) {
+ lcd_write_cmd(0x80 /* set DDRAM address */
+ | (lcd_addr_y ? lcd_hwidth : 0)
+ /* we force the cursor to stay at the end of the line if it wants to go farther */
+ | ((lcd_addr_x < lcd_bwidth) ? lcd_addr_x & (lcd_hwidth-1) : lcd_bwidth - 1));
+}
+
+static void lcd_print(char c) {
+ if (lcd_addr_x < lcd_bwidth) {
+ if (lcd_char_conv != NULL)
+ c = lcd_char_conv[(unsigned char)c];
+ lcd_write_data(c);
+ lcd_addr_x++;
+ }
+ /* prevents the cursor from wrapping onto the next line */
+ if (lcd_addr_x == lcd_bwidth) {
+ lcd_gotoxy();
+ }
+}
+
+/* fills the display with spaces and resets X/Y */
+static void lcd_clear_fast_s(void) {
+ int pos;
+ lcd_addr_x = lcd_addr_y = 0;
+ lcd_gotoxy();
+
+ spin_lock(&pprt_lock);
+ for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ lcd_send_serial(0x5F); /* R/W=W, RS=1 */
+ lcd_send_serial(' ' & 0x0F);
+ lcd_send_serial((' ' >> 4) & 0x0F);
+ udelay(40); /* the shortest data takes at least 40 us */
+ }
+ spin_unlock(&pprt_lock);
+
+ lcd_addr_x = lcd_addr_y = 0;
+ lcd_gotoxy();
+}
+
+/* fills the display with spaces and resets X/Y */
+static void lcd_clear_fast_p8(void) {
+ int pos;
+ lcd_addr_x = lcd_addr_y = 0;
+ lcd_gotoxy();
+
+ spin_lock(&pprt_lock);
+ for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ /* present the data to the data port */
+ w_dtr(pprt, ' ');
+ udelay(20); /* maintain the data during 20 us before the strobe */
+
+ bits.e = BIT_SET ; bits.rs = BIT_SET ; bits.rw = BIT_CLR;
+ set_ctrl_bits();
+
+ udelay(40); /* maintain the strobe during 40 us */
+
+ bits.e = BIT_CLR;
+ set_ctrl_bits();
+
+ udelay(45); /* the shortest data takes at least 45 us */
+ }
+ spin_unlock(&pprt_lock);
+
+ lcd_addr_x = lcd_addr_y = 0;
+ lcd_gotoxy();
+}
+
+/* clears the display and resets X/Y */
+static void lcd_clear_display(void) {
+ lcd_write_cmd(0x01); /* clear display */
+ lcd_addr_x = lcd_addr_y = 0;
+ /* we must wait a few milliseconds (15) */
+ long_sleep(15);
+}
+
+static void lcd_init_display(void) {
+
+ lcd_flags = ((lcd_height > 1) ? LCD_FLAG_N : 0)
+ | LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B;
+
+ long_sleep(20); /* wait 20 ms after power-up for the paranoid */
+
+ lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */
+ long_sleep(10);
+ lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */
+ long_sleep(10);
+ lcd_write_cmd(0x30); /* 8bits, 1 line, small fonts */
+ long_sleep(10);
+
+ lcd_write_cmd(0x30 /* set font height and lines number */
+ | ((lcd_flags & LCD_FLAG_F)?4:0)
+ | ((lcd_flags & LCD_FLAG_N)?8:0)
+ );
+ long_sleep(10);
+
+ lcd_write_cmd(0x08); /* display off, cursor off, blink off */
+ long_sleep(10);
+
+ lcd_write_cmd(0x08 /* set display mode */
+ | ((lcd_flags & LCD_FLAG_D)?4:0)
+ | ((lcd_flags & LCD_FLAG_C)?2:0)
+ | ((lcd_flags & LCD_FLAG_B)?1:0)
+ );
+
+ lcd_backlight((lcd_flags & LCD_FLAG_L) ? 1 : 0);
+
+ long_sleep(10);
+
+ lcd_write_cmd(0x06); /* entry mode set : increment, cursor shifting */
+
+ lcd_clear_display();
+}
+
+/*
+ * These are the file operation function for user access to /dev/lcd
+ * This function can also be called from inside the kernel, by
+ * setting file and ppos to NULL.
+ *
+ */
+
+static ssize_t lcd_write(struct file * file,
+ const char * buf, size_t count, loff_t *ppos ) {
+
+ const char *tmp = buf;
+ char c;
+
+ for( ; count-- > 0; (ppos ? (*ppos)++ : 0), ++tmp ) {
+ if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) {
+ schedule(); /* let's be a little nice with other processes that need some CPU */
+ }
+ if (ppos == NULL && file == NULL)
+ c = *tmp; /* let's not use get_user() from the kernel ! */
+ else if (get_user( c, tmp ))
+ return -EFAULT;
+
+ /* first, we'll test if we're in escape mode */
+ if ((c != '\n') && lcd_escape_len >= 0) { /* yes, let's add this char to the buffer */
+ lcd_escape[lcd_escape_len++] = c;
+ lcd_escape[lcd_escape_len] = 0;
+ }
+ else {
+ lcd_escape_len = -1; /* aborts any previous escape sequence */
+
+ switch (c) {
+ case LCD_ESCAPE_CHAR: /* start of an escape sequence */
+ lcd_escape_len = 0;
+ lcd_escape[lcd_escape_len] = 0;
+ break;
+ case '\b': /* go back one char and clear it */
+ if (lcd_addr_x > 0) {
+ if (lcd_addr_x < lcd_bwidth) /* check if we're not at the end of the line */
+ lcd_write_cmd(0x10); /* back one char */
+ lcd_addr_x--;
+ }
+ lcd_write_data(' '); /* replace with a space */
+ lcd_write_cmd(0x10); /* back one char again */
+ break;
+ case '\014': /* quickly clear the display */
+ lcd_clear_fast();
+ break;
+ case '\n': /* flush the remainder of the current line and go to the
+ beginning of the next line */
+ for (; lcd_addr_x<lcd_bwidth; lcd_addr_x++)
+ lcd_write_data(' ');
+ lcd_addr_x = 0;
+ lcd_addr_y = (lcd_addr_y + 1) % lcd_height;
+ lcd_gotoxy();
+ break;
+ case '\r': /* go to the beginning of the same line */
+ lcd_addr_x = 0;
+ lcd_gotoxy();
+ break;
+ case '\t': /* print a space instead of the tab */
+ lcd_print(' ');
+ break;
+ default : /* simply print this char */
+ lcd_print(c);
+ break;
+ }
+ }
+
+ /* now we'll see if we're in an escape mode and if the current
+ escape sequence can be understood.
+ */
+ if (lcd_escape_len >= 2) { /* minimal length for an escape command */
+ int processed = 0; /* 1 means the command has been processed */
+
+ if (!strcmp(lcd_escape,"[2J")) { /* Clear the display */
+ lcd_clear_fast(); /* clear display */
+ processed = 1;
+ }
+ else if (!strcmp(lcd_escape,"[H")) { /* Cursor to home */
+ lcd_addr_x = lcd_addr_y = 0;
+ lcd_gotoxy();
+ processed = 1;
+ }
+ /* codes starting with ^[[L */
+ else if ((lcd_escape_len >= 3) &&
+ (lcd_escape[0]=='[') && (lcd_escape[1]=='L')) { /* LCD special codes */
+
+ char *esc = lcd_escape + 2;
+ int oldflags = lcd_flags;
+
+ /* check for display mode flags */
+ switch (*esc) {
+ case 'D' : /* Display ON */
+ lcd_flags |= LCD_FLAG_D;
+ processed = 1;
+ break;
+ case 'd' : /* Display OFF */
+ lcd_flags &= ~LCD_FLAG_D;
+ processed = 1;
+ break;
+ case 'C' : /* Cursor ON */
+ lcd_flags |= LCD_FLAG_C;
+ processed = 1;
+ break;
+ case 'c' : /* Cursor OFF */
+ lcd_flags &= ~LCD_FLAG_C;
+ processed = 1;
+ break;
+ case 'B' : /* Blink ON */
+ lcd_flags |= LCD_FLAG_B;
+ processed = 1;
+ break;
+ case 'b' : /* Blink OFF */
+ lcd_flags &= ~LCD_FLAG_B;
+ processed = 1;
+ break;
+ case '+' : /* Back light ON */
+ lcd_flags |= LCD_FLAG_L;
+ processed = 1;
+ break;
+ case '-' : /* Back light OFF */
+ lcd_flags &= ~LCD_FLAG_L;
+ processed = 1;
+ break;
+ case '*' : /* flash back light using the keypad timer */
+ if (scan_timer.function != NULL) {
+ if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+ lcd_backlight(1);
+ light_tempo = FLASH_LIGHT_TEMPO;
+ }
+ processed = 1;
+ break;
+ case 'f' : /* Small Font */
+ lcd_flags &= ~LCD_FLAG_F;
+ processed = 1;
+ break;
+ case 'F' : /* Large Font */
+ lcd_flags |= LCD_FLAG_F;
+ processed = 1;
+ break;
+ case 'n' : /* One Line */
+ lcd_flags &= ~LCD_FLAG_N;
+ processed = 1;
+ break;
+ case 'N' : /* Two Lines */
+ lcd_flags |= LCD_FLAG_N;
+ break;
+
+ case 'l' : /* Shift Cursor Left */
+ if (lcd_addr_x > 0) {
+ if (lcd_addr_x < lcd_bwidth)
+ lcd_write_cmd(0x10); /* back one char if not at end of line */
+ lcd_addr_x--;
+ }
+ processed = 1;
+ break;
+
+ case 'r' : /* shift cursor right */
+ if (lcd_addr_x < lcd_width) {
+ if (lcd_addr_x < (lcd_bwidth - 1))
+ lcd_write_cmd(0x14); /* allow the cursor to pass the end of the line */
+ lcd_addr_x++;
+ }
+ processed = 1;
+ break;
+
+ case 'L' : /* shift display left */
+ lcd_left_shift++;
+ lcd_write_cmd(0x18);
+ processed = 1;
+ break;
+
+ case 'R' : /* shift display right */
+ lcd_left_shift--;
+ lcd_write_cmd(0x1C);
+ processed = 1;
+ break;
+
+ case 'k' : { /* kill end of line */
+ int x;
+ for (x=lcd_addr_x; x<lcd_bwidth; x++)
+ lcd_write_data(' ');
+ lcd_gotoxy(); /* restore cursor position */
+ processed = 1;
+ break;
+ }
+ case 'I' : /* reinitialize display */
+ lcd_init_display();
+ lcd_left_shift = 0;
+ processed = 1;
+ break;
+
+ case 'G' : /* Generator : LGcxxxxx...xx; */ {
+ /* must have <c> between '0' and '7', representing the numerical
+ * ASCII code of the redefined character, and <xx...xx> a sequence
+ * of 16 hex digits representing 8 bytes for each character. Most
+ * LCDs will only use 5 lower bits of the 7 first bytes.
+ */
+
+ unsigned char cgbytes[8];
+ unsigned char cgaddr;
+ int cgoffset;
+ int shift;
+ char value;
+ int addr;
+
+ if (strchr(esc, ';') == NULL)
+ break;
+
+ esc++;
+
+ cgaddr = *(esc++) - '0';
+ if (cgaddr > 7) {
+ processed = 1;
+ break;
+ }
+
+ cgoffset = 0;
+ shift = 0;
+ value = 0;
+ while (*esc && cgoffset < 8) {
+ shift ^= 4;
+ if (*esc >= '0' && *esc <='9')
+ value |= (*esc - '0') << shift;
+ else if (*esc >= 'A' && *esc <='Z')
+ value |= (*esc - 'A' + 10) << shift;
+ else if (*esc >= 'a' && *esc <='z')
+ value |= (*esc - 'a' + 10) << shift;
+ else {
+ esc++;
+ continue;
+ }
+
+ if (shift == 0) {
+ cgbytes[cgoffset++] = value;
+ value = 0;
+ }
+
+ esc++;
+ }
+
+ lcd_write_cmd(0x40 | (cgaddr * 8));
+ for (addr = 0; addr < cgoffset; addr++) {
+ lcd_write_data(cgbytes[addr]);
+ }
+
+ lcd_gotoxy(); /* ensures that we stop writing to CGRAM */
+ processed = 1;
+ break;
+ }
+ case 'x' : /* gotoxy : LxXXX[yYYY]; */
+ case 'y' : /* gotoxy : LyYYY[xXXX]; */
+ if (strchr(esc, ';') == NULL)
+ break;
+
+ while (*esc) {
+ if (*esc == 'x') {
+ esc++;
+ lcd_addr_x = 0;
+ while (isdigit(*esc)) {
+ lcd_addr_x = lcd_addr_x*10 + (*esc - '0');
+ esc++;
+ }
+ }
+ else if (*esc == 'y') {
+ esc++;
+ lcd_addr_y = 0;
+ while (isdigit(*esc)) {
+ lcd_addr_y = lcd_addr_y*10 + (*esc - '0');
+ esc++;
+ }
+ }
+ else break;
+ }
+
+ lcd_gotoxy();
+ processed = 1;
+ break;
+ } /* end of switch */
+
+ /* Check wether one flag was changed */
+ if (oldflags != lcd_flags) {
+ /* check wether one of B,C,D flags was changed */
+ if ((oldflags ^ lcd_flags) & (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
+ lcd_write_cmd(0x08 /* set display mode */
+ | ((lcd_flags & LCD_FLAG_D)?4:0)
+ | ((lcd_flags & LCD_FLAG_C)?2:0)
+ | ((lcd_flags & LCD_FLAG_B)?1:0)
+ );
+ /* check wether one of F,N flags was changed */
+ else if ((oldflags ^ lcd_flags) & (LCD_FLAG_F | LCD_FLAG_N))
+ lcd_write_cmd(0x30
+ | ((lcd_flags & LCD_FLAG_F)?4:0)
+ | ((lcd_flags & LCD_FLAG_N)?8:0)
+ );
+ /* check wether L flag was changed */
+ else if ((oldflags ^ lcd_flags) & (LCD_FLAG_L)) {
+ if (lcd_flags & (LCD_FLAG_L))
+ lcd_backlight(1);
+ else if (light_tempo == 0) /* switch off the light only when the tempo lighting is gone */
+ lcd_backlight(0);
+ }
+ }
+ } /* LCD special escape codes */
+
+ /* flush the escape sequence if it's been processed or if it is
+ getting too long. */
+ if (processed || (lcd_escape_len >= LCD_ESCAPE_LEN))
+ lcd_escape_len = -1;
+ } /* escape codes */
+ }
+
+ return( tmp - buf );
+}
+
+static int lcd_open( struct inode *inode, struct file *file ) {
+ if (lcd_open_cnt)
+ return( -EBUSY ); /* open only once at a time */
+
+ if (file->f_mode & FMODE_READ) /* device is write-only */
+ return ( -EPERM );
+
+ if (lcd_must_clear) {
+ lcd_clear_display();
+ lcd_must_clear = 0;
+ }
+ lcd_open_cnt++;
+ return( 0 );
+}
+
+static int lcd_release( struct inode *inode, struct file *file ) {
+ lcd_open_cnt--;
+ return( 0 );
+}
+
+
+static struct file_operations lcd_fops = {
+ write: lcd_write,
+ open: lcd_open,
+ release: lcd_release,
+};
+
+static struct miscdevice lcd_dev = {
+ LCD_MINOR,
+ "lcd",
+ &lcd_fops
+};
+
+
+
+/* public function usable from the kernel for any purpose */
+void panel_lcd_print(char *s) {
+ if (lcd_enabled && lcd_initialized)
+ lcd_write(NULL, s, strlen(s), NULL);
+}
+
+
+/* initialize the LCD driver */
+void lcd_init(void) {
+ switch (lcd_type) {
+ case LCD_TYPE_OLD : /* parallel mode, 8 bits */
+ if (lcd_proto < 0) lcd_proto = LCD_PROTO_PARALLEL;
+ if (lcd_charset < 0) lcd_charset = LCD_CHARSET_NORMAL;
+ if (lcd_e_pin == PIN_NOT_SET) lcd_e_pin = PIN_STROBE;
+ if (lcd_rs_pin == PIN_NOT_SET) lcd_rs_pin = PIN_AUTOLF;
+
+ if (lcd_width < 0) lcd_width = 40;
+ if (lcd_bwidth < 0) lcd_bwidth = 40;
+ if (lcd_hwidth < 0) lcd_hwidth = 64;
+ if (lcd_height < 0) lcd_height = 2;
+ break;
+ case LCD_TYPE_KS0074 : /* serial mode, ks0074 */
+ if (lcd_proto < 0) lcd_proto = LCD_PROTO_SERIAL;
+ if (lcd_charset < 0) lcd_charset = LCD_CHARSET_KS0074;
+ if (lcd_bl_pin == PIN_NOT_SET) lcd_bl_pin = PIN_AUTOLF;
+ if (lcd_cl_pin == PIN_NOT_SET) lcd_cl_pin = PIN_STROBE;
+ if (lcd_da_pin == PIN_NOT_SET) lcd_da_pin = PIN_D0;
+
+ if (lcd_width < 0) lcd_width = 16;
+ if (lcd_bwidth < 0) lcd_bwidth = 40;
+ if (lcd_hwidth < 0) lcd_hwidth = 16;
+ if (lcd_height < 0) lcd_height = 2;
+ break;
+ case LCD_TYPE_NEXCOM : /* parallel mode, 8 bits, generic */
+ if (lcd_proto < 0) lcd_proto = LCD_PROTO_PARALLEL;
+ if (lcd_charset < 0) lcd_charset = LCD_CHARSET_NORMAL;
+ if (lcd_e_pin == PIN_NOT_SET) lcd_e_pin = PIN_AUTOLF;
+ if (lcd_rs_pin == PIN_NOT_SET) lcd_rs_pin = PIN_SELECP;
+ if (lcd_rw_pin == PIN_NOT_SET) lcd_rw_pin = PIN_INITP;
+
+ if (lcd_width < 0) lcd_width = 16;
+ if (lcd_bwidth < 0) lcd_bwidth = 40;
+ if (lcd_hwidth < 0) lcd_hwidth = 64;
+ if (lcd_height < 0) lcd_height = 2;
+ break;
+ case LCD_TYPE_CUSTOM : /* customer-defined */
+ if (lcd_proto < 0) lcd_proto = DEFAULT_LCD_PROTO;
+ if (lcd_charset < 0) lcd_charset = DEFAULT_LCD_CHARSET;
+ /* default geometry will be set later */
+ break;
+ case LCD_TYPE_HANTRONIX : /* parallel mode, 8 bits, hantronix-like */
+ default :
+ if (lcd_proto < 0) lcd_proto = LCD_PROTO_PARALLEL;
+ if (lcd_charset < 0) lcd_charset = LCD_CHARSET_NORMAL;
+ if (lcd_e_pin == PIN_NOT_SET) lcd_e_pin = PIN_STROBE;
+ if (lcd_rs_pin == PIN_NOT_SET) lcd_rs_pin = PIN_SELECP;
+
+ if (lcd_width < 0) lcd_width = 16;
+ if (lcd_bwidth < 0) lcd_bwidth = 40;
+ if (lcd_hwidth < 0) lcd_hwidth = 64;
+ if (lcd_height < 0) lcd_height = 2;
+ break;
+ }
+
+ /* this is used to catch wrong and default values */
+ if (lcd_width <= 0) lcd_width = DEFAULT_LCD_WIDTH;
+ if (lcd_bwidth <= 0) lcd_bwidth = DEFAULT_LCD_BWIDTH;
+ if (lcd_hwidth <= 0) lcd_hwidth = DEFAULT_LCD_HWIDTH;
+ if (lcd_height <= 0) lcd_height = DEFAULT_LCD_HEIGHT;
+
+ if (lcd_proto == LCD_PROTO_SERIAL) { /* SERIAL */
+ lcd_write_cmd = lcd_write_cmd_s;
+ lcd_write_data = lcd_write_data_s;
+ lcd_clear_fast = lcd_clear_fast_s;
+
+ if (lcd_cl_pin == PIN_NOT_SET)
+ lcd_cl_pin = DEFAULT_LCD_PIN_SCL;
+ if (lcd_da_pin == PIN_NOT_SET)
+ lcd_da_pin = DEFAULT_LCD_PIN_SDA;
+
+ } else { /* PARALLEL */
+ lcd_write_cmd = lcd_write_cmd_p8;
+ lcd_write_data = lcd_write_data_p8;
+ lcd_clear_fast = lcd_clear_fast_p8;
+
+ if (lcd_e_pin == PIN_NOT_SET)
+ lcd_e_pin = DEFAULT_LCD_PIN_E;
+ if (lcd_rs_pin == PIN_NOT_SET)
+ lcd_rs_pin = DEFAULT_LCD_PIN_RS;
+ if (lcd_rw_pin == PIN_NOT_SET)
+ lcd_rw_pin = DEFAULT_LCD_PIN_RW;
+ }
+
+ if (lcd_bl_pin == PIN_NOT_SET)
+ lcd_bl_pin = DEFAULT_LCD_PIN_BL;
+
+ if (lcd_e_pin == PIN_NOT_SET) lcd_e_pin = PIN_NONE;
+ if (lcd_rs_pin == PIN_NOT_SET) lcd_rs_pin = PIN_NONE;
+ if (lcd_rw_pin == PIN_NOT_SET) lcd_rw_pin = PIN_NONE;
+ if (lcd_bl_pin == PIN_NOT_SET) lcd_bl_pin = PIN_NONE;
+ if (lcd_cl_pin == PIN_NOT_SET) lcd_cl_pin = PIN_NONE;
+ if (lcd_da_pin == PIN_NOT_SET) lcd_da_pin = PIN_NONE;
+
+ if (lcd_charset < 0)
+ lcd_charset = DEFAULT_LCD_CHARSET;
+
+ if (lcd_charset == LCD_CHARSET_KS0074)
+ lcd_char_conv = lcd_char_conv_ks0074;
+ else
+ lcd_char_conv = NULL;
+
+ if (lcd_bl_pin != PIN_NONE)
+ init_scan_timer();
+
+ pin_to_bits(lcd_e_pin, lcd_bits[LCD_PORT_D][LCD_BIT_E], lcd_bits[LCD_PORT_C][LCD_BIT_E]);
+ pin_to_bits(lcd_rs_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RS], lcd_bits[LCD_PORT_C][LCD_BIT_RS]);
+ pin_to_bits(lcd_rw_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RW], lcd_bits[LCD_PORT_C][LCD_BIT_RW]);
+ pin_to_bits(lcd_bl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_BL], lcd_bits[LCD_PORT_C][LCD_BIT_BL]);
+ pin_to_bits(lcd_cl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_CL], lcd_bits[LCD_PORT_C][LCD_BIT_CL]);
+ pin_to_bits(lcd_da_pin, lcd_bits[LCD_PORT_D][LCD_BIT_DA], lcd_bits[LCD_PORT_C][LCD_BIT_DA]);
+
+ /* before this line, we must NOT send anything to the display.
+ * Since lcd_init_display() needs to write data, we have to
+ * enable mark the LCD initialized just before.
+ */
+ lcd_initialized = 1;
+ lcd_init_display();
+
+ /* display a short message */
+#ifdef CONFIG_PANEL_CHANGE_MESSAGE
+#ifdef CONFIG_PANEL_BOOT_MESSAGE
+ panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE);
+#endif
+#else
+ panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE "\nPanel-" PANEL_VERSION);
+#endif
+ lcd_addr_x = lcd_addr_y = 0;
+ lcd_must_clear = 1; /* clear the display on the next device opening */
+ lcd_gotoxy();
+}
+
+
+/*
+ * These are the file operation function for user access to /dev/keypad
+ */
+
+static ssize_t keypad_read(struct file * file,
+ char * buf, size_t count, loff_t *ppos ) {
+
+ unsigned i = *ppos;
+ char *tmp = buf;
+
+ if (keypad_buflen == 0) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ //printk(KERN_ERR "keypad_read():1 len=%d", keypad_buflen);
+ interruptible_sleep_on(&keypad_read_wait);
+ //printk(KERN_ERR "keypad_read():2 len=%d", keypad_buflen);
+ if (signal_pending(current))
+ return -EINTR;
+ }
+
+ //printk(KERN_ERR "keypad_read():3 len=%d", keypad_buflen);
+ for( ; count-- > 0 && (keypad_buflen > 0); ++i, ++tmp, --keypad_buflen ) {
+ put_user( keypad_buffer[keypad_start], tmp );
+ keypad_start = (keypad_start + 1) % KEYPAD_BUFFER;
+ }
+ *ppos = i;
+ //printk(KERN_ERR "keypad_read():4 len=%d", keypad_buflen);
+
+ return( tmp - buf );
+}
+
+
+static int keypad_open( struct inode *inode, struct file *file ) {
+
+ if (keypad_open_cnt)
+ return( -EBUSY ); /* open only once at a time */
+
+ if (file->f_mode & FMODE_WRITE) /* device is read-only */
+ return ( -EPERM );
+
+ keypad_buflen = 0; /* flush the buffer on opening */
+ keypad_open_cnt++;
+ return( 0 );
+}
+
+static int keypad_release( struct inode *inode, struct file *file ) {
+ keypad_open_cnt--;
+ return( 0 );
+}
+
+static struct file_operations keypad_fops = {
+ read: keypad_read, /* read */
+ open: keypad_open, /* open */
+ release: keypad_release, /* close */
+};
+
+static struct miscdevice keypad_dev = {
+ KEYPAD_MINOR,
+ "keypad",
+ &keypad_fops
+};
+
+static void keypad_send_key(char *string, int max_len) {
+ //printk(KERN_ERR "keypad_send_key(%c,%d):1\n", *string,max_len);
+ if (init_in_progress)
+ return;
+ //printk(KERN_ERR "keypad_send_key(%c,%d):2\n", *string,max_len);
+
+ /* send the key to the device only if a process is attached to it. */
+ if (keypad_open_cnt > 0) {
+ //printk(KERN_ERR "keypad_send_key(%c,%d):3\n", *string,max_len);
+ while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) {
+ keypad_buffer[(keypad_start + keypad_buflen++) % KEYPAD_BUFFER] = *string++;
+ }
+ //printk(KERN_ERR "keypad_send_key(%d):4\n", *string,max_len);
+ wake_up_interruptible(&keypad_read_wait);
+ }
+ //printk(KERN_ERR "keypad_send_key(%d):5\n", *string,max_len);
+}
+
+
+/* this function scans all the bits involving at least one logical signal, and puts the
+ * results in the bitfield "phys_read" (one bit per established contact), and sets
+ * "phys_read_prev" to "phys_read".
+ *
+ * Note: to debounce input signals, we will only consider as switched a signal which is
+ * stable across 2 measures. Signals which are different between two reads will be kept
+ * as they previously were in their logical form (phys_prev). A signal which has just
+ * switched will have a 1 in (phys_read ^ phys_read_prev).
+ */
+static void phys_scan_contacts(void) {
+ int bit, bitval;
+ char oldval;
+ char bitmask;
+ char gndmask;
+
+ phys_prev = phys_curr;
+ phys_read_prev = phys_read;
+ phys_read = 0; /* flush all signals */
+
+ oldval = r_dtr(pprt) | scan_mask_o; /* keep track of old value, with all outputs disabled */
+ w_dtr(pprt, oldval & ~scan_mask_o); /* activate all keyboard outputs (active low) */
+ bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; /* will have a 1 for each bit set to gnd */
+ w_dtr(pprt, oldval); /* disable all matrix signals */
+
+ /* now that all outputs are cleared, the only active input bits are
+ * directly connected to the ground
+ */
+ gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; /* 1 for each grounded input */
+
+ phys_read |= (pmask_t)gndmask << 40; /* grounded inputs are signals 40-44 */
+
+ if (bitmask != gndmask) {
+ /* since clearing the outputs changed some inputs, we know that some
+ * input signals are currently tied to some outputs. So we'll scan them.
+ */
+ for (bit = 0; bit < 8; bit ++) {
+ bitval = 1 << bit;
+
+ if (!(scan_mask_o & bitval)) /* skip unused bits */
+ continue;
+
+ w_dtr(pprt, oldval & ~bitval); /* enable this output */
+ bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask;
+ phys_read |= (pmask_t) bitmask << (5*bit);
+ }
+ w_dtr(pprt, oldval); /* disable all outputs */
+ }
+ /* this is easy: use old bits when they are flapping, use new ones when stable */
+ phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) | (phys_read & ~(phys_read ^ phys_read_prev));
+}
+
+static void panel_process_inputs(void) {
+ struct list_head *item;
+ struct logical_input *input;
+
+#if 0
+ printk(KERN_DEBUG "entering panel_process_inputs with pp=%016Lx & pc=%016Lx\n",
+ phys_prev, phys_curr);
+#endif
+
+ keypressed = 0;
+ inputs_stable = 1;
+ list_for_each(item, &logical_inputs) {
+ input = list_entry(item, struct logical_input, list);
+
+ switch (input->state) {
+ case INPUT_ST_LOW:
+ if ((phys_curr & input->mask) != input->value)
+ break;
+ /* if all needed ones were already set previously, this means that
+ * this logical signal has been activated by the releasing of
+ * another combined signal, so we don't want to match.
+ * eg: AB -(release B)-> A -(release A)-> 0 : don't match A.
+ */
+ if ((phys_prev & input->mask) == input->value)
+ break;
+ input->rise_timer = 0;
+ input->state = INPUT_ST_RISING;
+ /* no break here, fall through */
+ case INPUT_ST_RISING:
+ if ((phys_curr & input->mask) != input->value) {
+ input->state = INPUT_ST_LOW;
+ break;
+ }
+ if (input->rise_timer < input->rise_time) {
+ inputs_stable = 0;
+ input->rise_timer++;
+ break;
+ }
+ input->high_timer = 0;
+ input->state = INPUT_ST_HIGH;
+ /* no break here, fall through */
+ case INPUT_ST_HIGH:
+#if 0
+ /* FIXME:
+ * this is an invalid test. It tries to catch transitions from single-key
+ * to multiple-key, but doesn't take into account the contacts polarity.
+ * The only solution to the problem is to parse keys from the most complex
+ * to the simplest combinations, and mark them as 'caught' once a combination
+ * matches, then unmatch it for all other ones.
+ */
+
+ /* try to catch dangerous transitions cases :
+ * someone adds a bit, so this signal was a false
+ * positive resulting from a transition. We should invalidate
+ * the signal immediately and not call the release function.
+ * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
+ */
+ if (((phys_prev & input->mask) == input->value)
+ && ((phys_curr & input->mask) > input->value)) {
+ input->state = INPUT_ST_LOW; /* invalidate */
+ break;
+ }
+ //else
+#endif
+
+ if ((phys_curr & input->mask) == input->value) {
+ if ((input->type == INPUT_TYPE_STD) && (input->high_timer == 0)) {
+ input->high_timer++;
+ if (input->u.std.press_fct != NULL)
+ input->u.std.press_fct(input->u.std.press_data);
+ }
+ else if (input->type == INPUT_TYPE_KBD) {
+ keypressed = 1; /* will turn on the light */
+
+ if (input->high_timer == 0) {
+ if (input->u.kbd.press_str[0])
+ keypad_send_key(input->u.kbd.press_str, sizeof(input->u.kbd.press_str));
+ }
+
+ if (input->u.kbd.repeat_str[0]) {
+ if (input->high_timer >= KEYPAD_REP_START) {
+ input->high_timer -= KEYPAD_REP_DELAY;
+ keypad_send_key(input->u.kbd.repeat_str, sizeof(input->u.kbd.repeat_str));
+ }
+ inputs_stable = 0; /* we will need to come back here soon */
+ }
+
+ if (input->high_timer < 255) {
+ input->high_timer++;
+ }
+ }
+ break;
+ }
+ else {
+ /* else signal falling down. Let's fall through. */
+ input->state = INPUT_ST_FALLING;
+ input->fall_timer = 0;
+ }
+ /* no break here, fall through */
+ case INPUT_ST_FALLING:
+#if 0
+ /* FIXME !!! same comment as above */
+ if (((phys_prev & input->mask) == input->value)
+ && ((phys_curr & input->mask) > input->value)) {
+ input->state = INPUT_ST_LOW; /* invalidate */
+ break;
+ }
+ //else
+#endif
+
+ if ((phys_curr & input->mask) == input->value) {
+ if (input->type == INPUT_TYPE_KBD) {
+ keypressed = 1; /* will turn on the light */
+
+ if (input->u.kbd.repeat_str[0]) {
+ if (input->high_timer >= KEYPAD_REP_START)
+ input->high_timer -= KEYPAD_REP_DELAY;
+ keypad_send_key(input->u.kbd.repeat_str, sizeof(input->u.kbd.repeat_str));
+ inputs_stable = 0; /* we will need to come back here soon */
+ }
+
+ if (input->high_timer < 255) {
+ input->high_timer++;
+ }
+ }
+ input->state = INPUT_ST_HIGH;
+ break;
+ }
+ else if (input->fall_timer >= input->fall_time) {
+ /* call release event */
+ if (input->type == INPUT_TYPE_STD) {
+ if (input->u.std.release_fct != NULL)
+ input->u.std.release_fct(input->u.std.release_data);
+ }
+ else if (input->type == INPUT_TYPE_KBD) {
+ if (input->u.kbd.release_str[0])
+ keypad_send_key(input->u.kbd.release_str, sizeof(input->u.kbd.release_str));
+ }
+
+ input->state = INPUT_ST_LOW;
+ break;
+ }
+ else {
+ input->fall_timer++;
+ inputs_stable = 0;
+ break;
+ }
+ }
+ }
+}
+
+static void panel_scan_timer(void) {
+ if ((keypad_enabled && keypad_initialized)
+ || (smartcard_enabled && smartcard_enabled)) {
+
+ if (spin_trylock(&pprt_lock)) {
+ phys_scan_contacts();
+ spin_unlock(&pprt_lock); /* no need for the parport anymore */
+ }
+
+ if (!inputs_stable || phys_curr != phys_prev) {
+ panel_process_inputs();
+ }
+ }
+
+ if (lcd_enabled && lcd_initialized) {
+ if (keypressed) {
+ if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+ lcd_backlight(1);
+ light_tempo = FLASH_LIGHT_TEMPO;
+ }
+ else if (light_tempo > 0) {
+ light_tempo--;
+ if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+ lcd_backlight(0);
+ }
+ }
+
+ mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME);
+}
+
+/* send a high / low clock impulse of <duration> microseconds high and low */
+static void smartcard_send_clock(int duration) {
+ int old;
+
+ w_dtr(pprt, (old = r_dtr(pprt)) | PNL_SC_CLK);
+ udelay(duration);
+ w_dtr(pprt, (old & ~PNL_SC_CLK));
+ udelay(duration);
+}
+
+static void smartcard_insert(int dummy) {
+ int ofs;
+
+ spin_lock(&pprt_lock);
+ w_dtr(pprt, (r_dtr(pprt) & ~PNL_SC_BITS));
+ w_ctr(pprt, (r_ctr(pprt) | PNL_SC_ENA));
+
+ udelay(30); /* ensure the rst is low at least 30 us */
+
+ smartcard_send_clock(100); /* reset address counter */
+
+ w_dtr(pprt, r_dtr(pprt) | PNL_SC_RST);
+ udelay(30); /* ensure the rst is high at least 30 us */
+
+ for (ofs = 0; ofs < SMARTCARD_BYTES; ofs++) {
+ int bit, byte;
+ byte = 0;
+ for (bit = 128; bit > 0; bit >>= 1) {
+ if (!(r_str(pprt) & PNL_SC_IOR))
+ byte |= bit;
+ smartcard_send_clock(15); /* 15 us are enough for data */
+ }
+ smartcard_data[ofs] = byte;
+ }
+
+ w_dtr(pprt, (r_dtr(pprt) & ~PNL_SC_BITS));
+ w_ctr(pprt, (r_ctr(pprt) & ~PNL_SC_ENA));
+
+ spin_unlock(&pprt_lock);
+
+ printk(KERN_INFO "Panel: smart card inserted : %02x%02x%02x%02x%1x\n",
+ smartcard_data[2], smartcard_data[3], smartcard_data[4],
+ smartcard_data[5], smartcard_data[6] >> 4);
+ keypad_send_key("CardIn\n", 7);
+}
+
+static void smartcard_remove(int dummy) {
+ printk(KERN_INFO "Panel: smart card removed : %02x%02x%02x%02x%1x\n",
+ smartcard_data[2], smartcard_data[3], smartcard_data[4],
+ smartcard_data[5], smartcard_data[6] >> 4);
+ memset(smartcard_data, 0, sizeof(smartcard_data));
+ keypad_send_key("CardOut\n", 8);
+}
+
+/*
+ * These are the file operation function for user access to /dev/smartcard
+ */
+
+static ssize_t smartcard_read(struct file * file,
+ char * buf, size_t count, loff_t *ppos ) {
+
+ unsigned i = *ppos;
+ char *tmp = buf;
+
+ for( ; count-- > 0 && (smartcard_ptr < 9); ++i, ++tmp, ++smartcard_ptr ) {
+ if (smartcard_ptr & 1)
+ put_user( '0' + (smartcard_data[2 + (smartcard_ptr >> 1)] & 0xF), tmp );
+ else
+ put_user( '0' + (smartcard_data[2 + (smartcard_ptr >> 1)] >> 4), tmp );
+ }
+ *ppos = i;
+
+ return( tmp - buf );
+}
+
+
+static int smartcard_open( struct inode *inode, struct file *file ) {
+
+ if (smartcard_open_cnt)
+ return( -EBUSY ); /* open only once at a time */
+
+ if (file->f_mode & FMODE_WRITE) /* device is read-only */
+ return ( -EPERM );
+
+ smartcard_ptr = 0; /* flush the buffer on opening */
+ smartcard_open_cnt++;
+ return( 0 );
+}
+
+static int smartcard_release( struct inode *inode, struct file *file ) {
+ smartcard_open_cnt--;
+ return( 0 );
+}
+
+static struct file_operations smartcard_fops = {
+ read: smartcard_read, /* read */
+ open: smartcard_open, /* open */
+ release: smartcard_release, /* close */
+};
+
+static struct miscdevice smartcard_dev = {
+ SMARTCARD_MINOR,
+ "smartcard",
+ &smartcard_fops
+};
+
+static void init_scan_timer(void) {
+ if (scan_timer.function != NULL)
+ return; /* already started */
+
+ init_timer(&scan_timer);
+ scan_timer.expires = jiffies + INPUT_POLL_TIME;
+ scan_timer.data = 0;
+ scan_timer.function = (void *)&panel_scan_timer;
+ add_timer(&scan_timer);
+}
+
+/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits.
+ * if <omask> or <imask> are non-null, they will be or'ed with the bits corresponding
+ * to out and in bits respectively.
+ * returns 1 if ok, 0 if error (in which case, nothing is written).
+ */
+static int input_name2mask(char *name, pmask_t *mask, pmask_t *value, char *imask, char *omask) {
+ static char sigtab[10]="EeSsPpAaBb";
+ char im, om;
+ pmask_t m, v;
+
+ om = im = m = v = 0ULL;
+ while (*name) {
+ int in, out, bit, neg;
+ for (in = 0; (in < sizeof(sigtab)) && (sigtab[in] != *name); in++);
+ if (in >= sizeof(sigtab))
+ return 0; /* input name not found */
+ neg = (in & 1); /* odd (lower) names are negated */
+ in >>= 1;
+ im |= (1 << in);
+
+ name++;
+ if (isdigit(*name)) {
+ out = *name - '0';
+ om |= (1 << out);
+ }
+ else if (*name == '-')
+ out = 8;
+ else
+ return 0; /* unknown bit name */
+
+ bit = (out * 5) + in;
+
+ m |= 1ULL << bit;
+ if (!neg)
+ v |= 1ULL << bit;
+ name++;
+ }
+ *mask = m;
+ *value = v;
+ if (imask)
+ *imask |= im;
+ if (omask)
+ *omask |= om;
+ return 1;
+}
+
+/* tries to bind a key to the signal name <name>. The key will send the
+ * strings <press>, <repeat>, <release> for these respective events.
+ * Returns the pointer to the new key if ok, NULL if the key could not be bound.
+ */
+static struct logical_input *panel_bind_key(char *name, char *press, char *repeat, char *release) {
+ struct logical_input *key;
+
+ key = (struct logical_input*)kmalloc(sizeof(struct logical_input), GFP_KERNEL);
+ if (!key) {
+ printk(KERN_ERR "panel: not enough memory\n");
+ return NULL;
+ }
+ memset(key, 0, sizeof(struct logical_input));
+ if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i, &scan_mask_o))
+ return NULL;
+ key->type = INPUT_TYPE_KBD;
+ key->state = INPUT_ST_LOW;
+ key->rise_time = 1;
+ key->fall_time = 1;
+
+#if 0
+ printk(KERN_DEBUG "bind: <%s> : m=%016Lx v=%016Lx\n", name, key->mask, key->value);
+#endif
+ strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str));
+ strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str));
+ strncpy(key->u.kbd.release_str, release, sizeof(key->u.kbd.release_str));
+ list_add(&key->list, &logical_inputs);
+ return key;
+}
+
+/* tries to bind a callback function to the signal name <name>. The function
+ * <press_fct> will be called with the <press_data> arg when the signal is
+ * activated, and so on for <release_fct>/<release_data>
+ * Returns the pointer to the new signal if ok, NULL if the signal could not be bound.
+ */
+static struct logical_input *panel_bind_callback(char *name,
+ void (*press_fct)(int), int press_data,
+ void (*release_fct)(int), int release_data) {
+ struct logical_input *callback;
+
+ callback = (struct logical_input*)kmalloc(sizeof(struct logical_input), GFP_KERNEL);
+ if (!callback) {
+ printk(KERN_ERR "panel: not enough memory\n");
+ return NULL;
+ }
+ memset(callback, 0, sizeof(struct logical_input));
+ if (!input_name2mask(name, &callback->mask, &callback->value, &scan_mask_i, &scan_mask_o))
+ return NULL;
+ callback->type = INPUT_TYPE_STD;
+ callback->state = INPUT_ST_LOW;
+ callback->rise_time = 1;
+ callback->fall_time = 1;
+ callback->u.std.press_fct = press_fct;
+ callback->u.std.press_data = press_data;
+ callback->u.std.release_fct = release_fct;
+ callback->u.std.release_data = release_data;
+ list_add(&callback->list, &logical_inputs);
+ return callback;
+}
+
+static void keypad_init(void) {
+ int keynum;
+ init_waitqueue_head(&keypad_read_wait);
+ keypad_buflen = 0; /* flushes any eventual noisy keystroke */
+
+ /* Let's create all known keys */
+
+ for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) {
+ panel_bind_key(keypad_profile[keynum][0],
+ keypad_profile[keynum][1],
+ keypad_profile[keynum][2],
+ keypad_profile[keynum][3]);
+ }
+
+ init_scan_timer();
+ keypad_initialized = 1;
+}
+
+
+static void smartcard_init(void) {
+ init_waitqueue_head(&smartcard_read_wait);
+
+ panel_bind_callback(SMARTCARD_LOGICAL_DETECTOR, &smartcard_insert, 0, &smartcard_remove, 0);
+ init_scan_timer();
+ smartcard_enabled = 1;
+}
+
+
+/**************************************************/
+/* device initialization */
+/**************************************************/
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#define INIT_FUNC static int __init panel_init_module
+#define CLEANUP_FUNC static void __exit panel_cleanup_module
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
+#define INIT_FUNC static int __init panel_init_module
+#define CLEANUP_FUNC static void panel_cleanup_module
+#else
+#define INIT_FUNC int init_module
+#define CLEANUP_FUNC int cleanup_module
+#endif
+
+#ifndef MODULE
+/* called when compiled into the kernel */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
+static int __init panel_setup(char *str)
+#else
+__initfunc(void panel_setup(char *str, int *ints))
+#endif
+{
+ int dummy;
+ int *where;
+ int helpdisplayed = 0;
+
+ if (!str)
+ return 0;
+
+ while (*str) {
+ where = NULL;
+
+ /* let's parse each of the command line parameters of the following form :
+ panel=[parport:x],[lcd_height:x],[lcd_width:x],[lcd_bwidth:x],[lcd_hwidth:x]
+ */
+ if (!strncmp(str, "parport:", 8)) {
+ str += 8;
+ where = &parport;
+ }
+ else if (!strncmp(str, "disabled", 8)) {
+ return 0;
+ }
+ else if (!strncmp(str, "lcd_height:", 11)) {
+ str += 11;
+ where = &lcd_height;
+ }
+ else if (!strncmp(str, "lcd_width:", 10)) {
+ str += 10;
+ where = &lcd_width;
+ }
+ else if (!strncmp(str, "lcd_bwidth:", 11)) {
+ str += 11;
+ where = &lcd_bwidth;
+ }
+ else if (!strncmp(str, "lcd_hwidth:", 11)) {
+ str += 11;
+ where = &lcd_hwidth;
+ }
+ else if (!strncmp(str, "lcd_enabled:", 12)) {
+ str += 12;
+ where = &lcd_enabled;
+ }
+ else if (!strncmp(str, "keypad_enabled:", 15)) {
+ str += 15;
+ where = &keypad_enabled;
+ }
+ else if (!strncmp(str, "smartcard_enabled:", 18)) {
+ str += 18;
+ where = &smartcard_enabled;
+ }
+ else if (!strncmp(str, "profile:", 8)) {
+ str += 8;
+ where = &profile;
+ }
+ else if (!helpdisplayed) {
+ helpdisplayed = 1;
+ printk(KERN_ERR "Panel version " PANEL_VERSION ": invalid argument. Known arguments are :\n"
+ " parport:, lcd_{height,width,bwidth,enabled}:, keypad_enabled:\n");
+ }
+
+ /* see if we need to read a number */
+ if (where != NULL) {
+ dummy = 0;
+ while (isdigit(*str)) {
+ dummy = (dummy*10) + (*str - '0');
+ str++;
+ }
+ *where = dummy;
+ }
+
+ /* look for next arg */
+ while (*str && (*str != ','))
+ str++;
+ while (*str == ',')
+ str++;
+ }
+ return 1;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
+__setup("panel=", panel_setup );
+#else
+__setup("panel", panel_setup );
+#endif
+
+#endif /* !MODULE */
+
+static int panel_notify_sys(struct notifier_block *this, unsigned long code, void *unused) {
+ if (lcd_enabled && lcd_initialized) {
+ switch(code) {
+ case SYS_DOWN:
+ panel_lcd_print("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+");
+ break;
+ case SYS_HALT:
+ panel_lcd_print("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+");
+ break;
+ case SYS_POWER_OFF:
+ panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+");
+ break;
+ default:
+ break;
+ }
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block panel_notifier = {
+ panel_notify_sys,
+ NULL,
+ 0
+};
+
+
+static void panel_attach (struct parport *port)
+{
+ if (port->number != parport)
+ return;
+
+ if (pprt) {
+ printk(KERN_ERR "panel_attach(): port->number=%d parport=%d, already registered !\n", port->number, parport);
+ return;
+ }
+
+ pprt = parport_register_device(port, "panel",
+ NULL, NULL, /* pf, kf */
+ NULL,
+ /*PARPORT_DEV_EXCL*/
+ 0,
+ (void *)&pprt);
+
+ if (parport_claim(pprt)) {
+ printk(KERN_ERR "Panel: could not claim access to parport%d. Aborting.\n", parport);
+ //parport_unregister_device(pprt);
+ //parport_unregister_driver(&panel_driver);
+ //return -EIO;
+ return;
+ }
+
+ /* turns IRQ off */
+ // port->ops->disable_irq(port);
+
+ /* must init LCD first, just in case an IRQ from the keypad is generated at keypad init */
+ if (lcd_enabled) {
+ lcd_init();
+ misc_register( &lcd_dev );
+ }
+
+ if (keypad_enabled) {
+ keypad_init();
+ misc_register( &keypad_dev );
+ }
+
+ if (smartcard_enabled) {
+ smartcard_init();
+ misc_register( &smartcard_dev );
+ }
+}
+
+static void panel_detach (struct parport *port)
+{
+ if (port->number != parport)
+ return;
+
+ if (!pprt) {
+ printk(KERN_ERR "panel_detach(): port->number=%d parport=%d, nothing to unregister.\n",
+ port->number, parport);
+ return;
+ }
+
+ if (smartcard_enabled && smartcard_initialized) {
+ misc_deregister( &smartcard_dev );
+ }
+
+ if (keypad_enabled && keypad_initialized) {
+ misc_deregister( &keypad_dev );
+ }
+
+ if (lcd_enabled && lcd_initialized) {
+ misc_deregister( &lcd_dev );
+ }
+
+ parport_release(pprt);
+ parport_unregister_device(pprt);
+ pprt = NULL;
+}
+
+static struct parport_driver panel_driver = {
+ .name = "panel",
+ .attach = panel_attach,
+ .detach = panel_detach,
+};
+
+/* init function */
+int panel_init (void) {
+ /* for backwards compatibility */
+ if (keypad_type < 0)
+ keypad_type = keypad_enabled;
+
+ if (lcd_type < 0)
+ lcd_type = lcd_enabled;
+
+ if (parport < 0)
+ parport = DEFAULT_PARPORT;
+
+ /* take care of an eventual profile */
+ switch (profile) {
+ case PANEL_PROFILE_CUSTOM: /* custom profile */
+ if (keypad_type < 0) keypad_type = DEFAULT_KEYPAD;
+ if (smartcard_enabled < 0) smartcard_enabled = DEFAULT_SMARTCARD;
+ if (lcd_type < 0) lcd_type = DEFAULT_LCD;
+ break;
+ case PANEL_PROFILE_OLD: /* 8 bits, 2*16, old keypad */
+ if (keypad_type < 0) keypad_type = KEYPAD_TYPE_OLD;
+ if (smartcard_enabled < 0) smartcard_enabled = 0;
+ if (lcd_type < 0) lcd_type = LCD_TYPE_OLD;
+ if (lcd_width < 0) lcd_width = 16;
+ if (lcd_hwidth < 0) lcd_hwidth = 16;
+ break;
+ case PANEL_PROFILE_NEW: /* serial, 2*16, new keypad */
+ if (keypad_type < 0) keypad_type = KEYPAD_TYPE_NEW;
+ if (smartcard_enabled < 0) smartcard_enabled = 1;
+ if (lcd_type < 0) lcd_type = LCD_TYPE_KS0074;
+ break;
+ case PANEL_PROFILE_HANTRONIX: /* 8 bits, 2*16 hantronix-like, no keypad */
+ if (keypad_type < 0) keypad_type = KEYPAD_TYPE_NONE;
+ if (smartcard_enabled < 0) smartcard_enabled = 0;
+ if (lcd_type < 0) lcd_type = LCD_TYPE_HANTRONIX;
+ break;
+ case PANEL_PROFILE_NEXCOM: /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
+ if (keypad_type < 0) keypad_type = KEYPAD_TYPE_NEXCOM;
+ if (smartcard_enabled < 0) smartcard_enabled = 0;
+ if (lcd_type < 0) lcd_type = LCD_TYPE_NEXCOM;
+ break;
+ case PANEL_PROFILE_LARGE: /* 8 bits, 2*40, old keypad */
+ if (keypad_type < 0) keypad_type = KEYPAD_TYPE_OLD;
+ if (smartcard_enabled < 0) smartcard_enabled = 0;
+ if (lcd_type < 0) lcd_type = LCD_TYPE_OLD;
+ break;
+ }
+
+ lcd_enabled = (lcd_type > 0);
+ keypad_enabled = (keypad_type > 0);
+
+ switch (keypad_type) {
+ case KEYPAD_TYPE_OLD:
+ keypad_profile = old_keypad_profile;
+ break;
+ case KEYPAD_TYPE_NEW:
+ keypad_profile = new_keypad_profile;
+ break;
+ case KEYPAD_TYPE_NEXCOM:
+ keypad_profile = nexcom_keypad_profile;
+ break;
+ default:
+ keypad_profile = NULL;
+ break;
+ }
+
+ /* tells various subsystems about the fact that we are initializing */
+ init_in_progress = 1;
+
+ if (parport_register_driver(&panel_driver)) {
+ printk(KERN_ERR "Panel: could not register with parport. Aborting.\n");
+ return -EIO;
+ }
+
+ // The parport can be asynchronously registered later.
+ //if (pprt == NULL) {
+ // printk(KERN_ERR "Panel: could not register parport%d. Aborting.\n", parport);
+ // parport_unregister_driver(&panel_driver);
+ // return -ENODEV; /* port not found */
+ //}
+
+
+ if (!lcd_enabled && !keypad_enabled && !smartcard_enabled) { /* no device enabled, let's release the parport */
+ if (pprt) {
+ parport_release(pprt);
+ parport_unregister_device(pprt);
+ }
+ parport_unregister_driver(&panel_driver);
+ printk(KERN_ERR "Panel driver version " PANEL_VERSION " disabled.\n");
+ return -ENODEV;
+ }
+
+ register_reboot_notifier(&panel_notifier);
+
+ if (pprt)
+ printk(KERN_INFO "Panel driver version " PANEL_VERSION " registered on parport%d (io=0x%lx).\n",
+ parport, pprt->port->base);
+ else
+ printk(KERN_INFO "Panel driver version " PANEL_VERSION " not yet registered\n");
+ /* tells various subsystems about the fact that initialization is finished */
+ init_in_progress = 0;
+ return 0;
+}
+
+
+#if defined(MODULE) || (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0))
+INIT_FUNC (void) {
+ return panel_init();
+}
+
+CLEANUP_FUNC (void) {
+ unregister_reboot_notifier(&panel_notifier);
+
+ if (scan_timer.function != NULL) {
+ del_timer(&scan_timer);
+ }
+
+ if (keypad_enabled) {
+ misc_deregister( &keypad_dev );
+ }
+
+ if (smartcard_enabled) {
+ misc_deregister( &smartcard_dev );
+ }
+
+ if (lcd_enabled) {
+ panel_lcd_print("\x0cLCD driver " PANEL_VERSION "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
+ misc_deregister( &lcd_dev );
+ }
+
+ /* TODO: free all input signals */
+
+ parport_release(pprt);
+ parport_unregister_device(pprt);
+ parport_unregister_driver(&panel_driver);
+}
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
+module_init(panel_init_module);
+module_exit(panel_cleanup_module);
+MODULE_AUTHOR("Willy Tarreau");
+MODULE_LICENSE("GPL");
+#endif
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * tab-width: 8
+ * End:
+ */
+