diff options
66 files changed, 3319 insertions, 568 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5c10af66fb5..ad6b1c084fe 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -313,7 +313,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL + depends on BOOK3S && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 08f7cc0a195..22091bbfdc9 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -129,7 +129,7 @@ config BDI_SWITCH config BOOTX_TEXT bool "Support for early boot text console (BootX or OpenFirmware only)" - depends on PPC_OF && PPC_MULTIPLATFORM + depends on PPC_OF && PPC_BOOK3S help Say Y here to see progress messages from the boot firmware in text mode. Requires either BootX or Open Firmware. diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 72d17f50e54..551fc58c05c 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -147,8 +147,8 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ - arch/powerpc/platforms/ -core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ + arch/powerpc/platforms/ \ + arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_KVM) += arch/powerpc/kvm/ diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts new file mode 100644 index 00000000000..0ddfdfc7ab5 --- /dev/null +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -0,0 +1,364 @@ +/* + * GE Fanuc PPC9A Device Tree Source + * + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts + */ + +/dts-v1/; + +/ { + model = "GEF_PPC9A"; + compatible = "gef,ppc9a"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,ppc9a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + fpga@4,0 { + compatible = "gef,ppc9a-fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8641-soc", "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + reg = <0xfef00000 0x100000>; // CCSRBAR 1M + bus-frequency = <33333333>; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + }; + + enet0: ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@26000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts index 15d9e35eb58..32178bfa77d 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -227,7 +227,7 @@ device_type = "open-pic"; protected-sources = < 31 32 33 37 38 39 /* enet2 enet3 */ - 76 77 78 79 27 42 /* dma2 pci2 serial*/ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ 0xe0 0xe1 0xe2 0xe3 /* msi */ 0xe4 0xe5 0xe6 0xe7 >; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts index eace811d27e..159cb3a875f 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -186,7 +186,7 @@ protected-sources = < 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ 29 30 34 35 36 40 /* enet0 enet1 */ - 24 26 20 21 22 23 /* pcie0 pcie1 dma1 */ + 24 25 20 21 22 23 /* pci0 pci1 dma1 */ 43 /* i2c */ 0x1 0x2 0x3 0x4 /* pci slot */ 0x9 0xa 0xb 0xc /* usb */ diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig new file mode 100644 index 00000000000..df2c1633779 --- /dev/null +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -0,0 +1,1889 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc7 +# Fri Mar 13 15:36:11 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y +# CONFIG_MPC8641_HPCN is not set +# CONFIG_SBC8641D is not set +# CONFIG_MPC8610_HPCD is not set +CONFIG_GEF_PPC9A=y +# CONFIG_GEF_SBC310 is not set +# CONFIG_GEF_SBC610 is not set +CONFIG_MPC8641=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_IRQ_ALL_CPUS=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_MH is not set +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_REJECT is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m +# CONFIG_IP6_NF_SECURITY is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_MULTIQ is not set +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E is not set +# CONFIG_ATM_HE is not set +# CONFIG_ATM_SOLOS is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_PPPOL2TP is not set +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_DS1682=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM92=y +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +CONFIG_GEF_WDT=y +# CONFIG_8xxx_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +CONFIG_RTC_DRV_RX8581=y + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PPC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index f75a5fc64d2..b7e034b0a6d 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -129,7 +129,7 @@ static inline int irqs_disabled_flags(unsigned long flags) * interrupt-retrigger: should we handle this via lost interrupts and IPIs * or should we not care like we do now ? --BenH. */ -struct hw_interrupt_type; +struct irq_chip; #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index 98bd7c5fcd0..67ceffc01b4 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -19,55 +19,6 @@ extern int icache_44x_need_flush; #endif /* __ASSEMBLY__ */ /* - * The PowerPC MMU uses a hash table containing PTEs, together with - * a set of 16 segment registers (on 32-bit implementations), to define - * the virtual to physical address mapping. - * - * We use the hash table as an extended TLB, i.e. a cache of currently - * active mappings. We maintain a two-level page table tree, much - * like that used by the i386, for the sake of the Linux memory - * management code. Low-level assembler code in hashtable.S - * (procedure hash_page) is responsible for extracting ptes from the - * tree and putting them into the hash table when necessary, and - * updating the accessed and modified bits in the page table tree. - */ - -/* - * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. - * We also use the two level tables, but we can put the real bits in them - * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, - * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has - * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit - * based upon user/super access. The TLB does not have accessed nor write - * protect. We assume that if the TLB get loaded with an entry it is - * accessed, and overload the changed bit for write protect. We use - * two bits in the software pte that are supposed to be set to zero in - * the TLB entry (24 and 25) for these indicators. Although the level 1 - * descriptor contains the guarded and writethrough/copyback bits, we can - * set these at the page level since they get copied from the Mx_TWC - * register when the TLB entry is loaded. We will use bit 27 for guard, since - * that is where it exists in the MD_TWC, and bit 26 for writethrough. - * These will get masked from the level 2 descriptor at TLB load time, and - * copied to the MD_TWC before it gets loaded. - * Large page sizes added. We currently support two sizes, 4K and 8M. - * This also allows a TLB hander optimization because we can directly - * load the PMD into MD_TWC. The 8M pages are only used for kernel - * mapping of well known areas. The PMD (PGD) entries contain control - * flags in addition to the address, so care must be taken that the - * software no longer assumes these are only pointers. - */ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - */ - -/* * The normal case is that PTEs are 32-bits and we have a 1-page * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus * @@ -135,261 +86,25 @@ extern int icache_44x_need_flush; */ #if defined(CONFIG_40x) - -/* There are several potential gotchas here. The 40x hardware TLBLO - field looks like this: - - 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - RPN..................... 0 0 EX WR ZSEL....... W I M G - - Where possible we make the Linux PTE bits match up with this - - - bits 20 and 21 must be cleared, because we use 4k pages (40x can - support down to 1k pages), this is done in the TLBMiss exception - handler. - - We use only zones 0 (for kernel pages) and 1 (for user pages) - of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - miss handler. Bit 27 is PAGE_USER, thus selecting the correct - zone. - - PRESENT *must* be in the bottom two bits because swap cache - entries use the top 30 bits. Because 40x doesn't support SMP - anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - is cleared in the TLB miss handler before the TLB entry is loaded. - - All other bits of the PTE are loaded into TLBLO without - modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - software PTE bits. We actually use use bits 21, 24, 25, and - 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - PRESENT. -*/ - -/* Definitions for 40x embedded chips. */ -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ -#define _PAGE_RW 0x040 /* software: Writes permitted */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_BAD 0x802 -#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) - -/* Until my rework is finished, 40x still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - +#include <asm/pte-40x.h> #elif defined(CONFIG_44x) -/* - * Definitions for PPC440 - * - * Because of the 3 word TLB entries to support 36-bit addressing, - * the attribute are difficult to map in such a fashion that they - * are easily loaded during exception processing. I decided to - * organize the entry so the ERPN is the only portion in the - * upper word of the PTE and the attribute bits below are packed - * in as sensibly as they can be in the area below a 4KB page size - * oriented RPN. This at least makes it easy to load the RPN and - * ERPN fields in the TLB. -Matt - * - * Note that these bits preclude future use of a page size - * less than 4KB. - * - * - * PPC 440 core has following TLB attribute fields; - * - * TLB1: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN................................. - - - - - - ERPN....... - * - * TLB2: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR - * - * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional - * TLB2 storage attibute fields. Those are: - * - * TLB2: - * 0...10 11 12 13 14 15 16...31 - * no change WL1 IL1I IL1D IL2I IL2D no change - * - * There are some constrains and options, to decide mapping software bits - * into TLB entry. - * - * - PRESENT *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - FILE *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - CACHE COHERENT bit (M) has no effect on original PPC440 cores, - * because it doesn't support SMP. However, some later 460 variants - * have -some- form of SMP support and so I keep the bit there for - * future use - * - * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used - * for memory protection related functions (see PTE structure in - * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the - * above bits. Note that the bit values are CPU specific, not architecture - * specific. - * - * The kernel PTE entry holds an arch-dependent swp_entry structure under - * certain situations. In other words, in such situations some portion of - * the PTE bits are used as a swp_entry. In the PPC implementation, the - * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still - * hold protection values. That means the three protection bits are - * reserved for both PTE and SWAP entry at the most significant three - * LSBs. - * - * There are three protection bits available for SWAP entry: - * _PAGE_PRESENT - * _PAGE_FILE - * _PAGE_HASHPTE (if HW has) - * - * So those three bits have to be inside of 0-2nd LSB of PTE. - * - */ - -#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ -#define _PAGE_RW 0x00000002 /* S: Write permission */ -#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ -#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ -#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ -#define _PAGE_SPECIAL 0x00000020 /* S: Special page */ -#define _PAGE_USER 0x00000040 /* S: User page */ -#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ -#define _PAGE_GUARDED 0x00000100 /* H: G bit */ -#define _PAGE_COHERENT 0x00000200 /* H: M bit */ -#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ - -/* TODO: Add large page lowmem mapping support */ -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffff00000000ULL - -#define __HAVE_ARCH_PTE_SPECIAL - +#include <asm/pte-44x.h> #elif defined(CONFIG_FSL_BOOKE) -/* - MMU Assist Register 3: - - 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 - RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR - - - PRESENT *must* be in the bottom three bits because swap cache - entries use the top 29 bits. - - - FILE *must* be in the bottom three bits because swap cache - entries use the top 29 bits. -*/ - -/* Definitions for FSL Book-E Cores */ -#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ -#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ -#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ -#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ -#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ -#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ -#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ - -#define _PAGE_ENDIAN 0x00040 /* H: E bit */ -#define _PAGE_GUARDED 0x00080 /* H: G bit */ -#define _PAGE_COHERENT 0x00100 /* H: M bit */ -#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ -#define _PAGE_SPECIAL 0x00800 /* S: Special page */ - -#ifdef CONFIG_PTE_64BIT -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffffffff0000ULL -#endif - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -#define __HAVE_ARCH_PTE_SPECIAL - +#include <asm/pte-fsl-booke.h> #elif defined(CONFIG_8xx) -/* Definitions for 8xx embedded chips. */ -#define _PAGE_PRESENT 0x0001 /* Page is valid */ -#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ -#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ -#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ - -/* These five software bits must be masked out when the entry is loaded - * into the TLB. - */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ -#define _PAGE_GUARDED 0x0010 /* software: guarded access */ -#define _PAGE_DIRTY 0x0020 /* software: page changed */ -#define _PAGE_RW 0x0040 /* software: user write access allowed */ -#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ - -/* Setting any bits in the nibble with the follow two controls will - * require a TLB exception handler change. It is assumed unused bits - * are always zero. - */ -#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ -#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ - -#define _PMD_PRESENT 0x0001 -#define _PMD_BAD 0x0ff0 -#define _PMD_PAGE_MASK 0x000c -#define _PMD_PAGE_8M 0x000c - -#define _PTE_NONE_MASK _PAGE_ACCESSED - -/* Until my rework is finished, 8xx still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - +#include <asm/pte-8xx.h> #else /* CONFIG_6xx */ -/* Definitions for 60x, 740/750, etc. */ -#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ -#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ -#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ -#define _PAGE_USER 0x004 /* usermode access allowed */ -#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ -#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x080 /* C: page changed */ -#define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ -#define _PAGE_RW 0x400 /* software: user write access allowed */ -#define _PAGE_SPECIAL 0x800 /* software: Special page */ - -#ifdef CONFIG_PTE_64BIT -/* We never clear the high word of the pte */ -#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE) -#else -#define _PTE_NONE_MASK _PAGE_HASHPTE +#include <asm/pte-hash32.h> #endif -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* Hash table based platforms need atomic updates of the linux PTE */ -#define PTE_ATOMIC_UPDATES 1 - +/* If _PAGE_SPECIAL is defined, then we advertise our support for it */ +#ifdef _PAGE_SPECIAL #define __HAVE_ARCH_PTE_SPECIAL - #endif /* - * Some bits are only used on some cpu families... + * Some bits are only used on some cpu families... Make sure that all + * the undefined gets defined as 0 */ #ifndef _PAGE_HASHPTE #define _PAGE_HASHPTE 0 @@ -431,9 +146,29 @@ extern int icache_44x_need_flush; #define _PAGE_HPTEFLAGS _PAGE_HASHPTE -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SPECIAL) +/* Location of the PFN in the PTE. Most platforms use the same as _PAGE_SHIFT + * here (ie, naturally aligned). Platform who don't just pre-define the + * value so we don't override it here + */ +#ifndef PTE_RPN_SHIFT +#define PTE_RPN_SHIFT (PAGE_SHIFT) +#endif + +#ifdef CONFIG_PTE_64BIT +#define PTE_RPN_MAX (1ULL << (64 - PTE_RPN_SHIFT)) +#define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1)) +#else +#define PTE_RPN_MAX (1UL << (32 - PTE_RPN_SHIFT)) +#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) +#endif + +/* _PAGE_CHG_MASK masks of bits that are to be preserved accross + * pgprot changes + */ +#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_SPECIAL) +/* Mask of bits returned by pte_pgprot() */ #define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ _PAGE_WRITETHRU | _PAGE_ENDIAN | \ _PAGE_USER | _PAGE_ACCESSED | \ @@ -521,18 +256,10 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); * Conversions between PTE values and page frame numbers. */ -/* in some case we want to additionaly adjust where the pfn is in the pte to - * allow room for more flags */ -#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) -#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8) -#else -#define PFN_SHIFT_OFFSET (PAGE_SHIFT) -#endif - -#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) +#define pte_pfn(x) (pte_val(x) >> PTE_RPN_SHIFT) #define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ +#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |\ pgprot_val(prot)) #define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) #endif /* __ASSEMBLY__ */ @@ -600,11 +327,19 @@ extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long address); /* - * Atomic PTE updates. + * PTE updates. This function is called whenever an existing + * valid PTE is updated. This does -not- include set_pte_at() + * which nowadays only sets a new PTE. + * + * Depending on the type of MMU, we may need to use atomic updates + * and the PTE may be either 32 or 64 bit wide. In the later case, + * when using atomic updates, only the low part of the PTE is + * accessed atomically. * - * pte_update clears and sets bit atomically, and returns - * the old pte value. In the 64-bit PTE case we lock around the - * low PTE word since we expect ALL flag bits to be there + * In addition, on 44x, we also maintain a global flag indicating + * that an executable user mapping was modified, which is needed + * to properly flush the virtually tagged instruction cache of + * those implementations. */ #ifndef CONFIG_PTE_64BIT static inline unsigned long pte_update(pte_t *p, diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-ppc64-4k.h index 1dbca4e7de6..6eefdcffa35 100644 --- a/arch/powerpc/include/asm/pgtable-4k.h +++ b/arch/powerpc/include/asm/pgtable-ppc64-4k.h @@ -1,5 +1,5 @@ -#ifndef _ASM_POWERPC_PGTABLE_4K_H -#define _ASM_POWERPC_PGTABLE_4K_H +#ifndef _ASM_POWERPC_PGTABLE_PPC64_4K_H +#define _ASM_POWERPC_PGTABLE_PPC64_4K_H /* * Entries per page directory level. The PTE level must use a 64b record * for each page table entry. The PMD and PGD level use a 32b record for @@ -40,28 +40,6 @@ #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) -/* PTE bits */ -#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ -#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ -#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ -#define _PAGE_F_SECOND _PAGE_SECONDARY -#define _PAGE_F_GIX _PAGE_GROUP_IX -#define _PAGE_SPECIAL 0x10000 /* software: special page */ -#define __HAVE_ARCH_PTE_SPECIAL - -/* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ - _PAGE_SECONDARY | _PAGE_GROUP_IX) - -/* There is no 4K PFN hack on 4K pages */ -#define _PAGE_4K_PFN 0 - -/* PAGE_MASK gives the right answer below, but only by accident */ -/* It should be preserving the high 48 bits and then specifically */ -/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_HPTEFLAGS | _PAGE_SPECIAL) - /* Bits to mask out from a PMD to get to the PTE page */ #define PMD_MASKED_BITS 0 /* Bits to mask out from a PUD to get to the PMD page */ @@ -69,30 +47,6 @@ /* Bits to mask out from a PGD to get to the PUD page */ #define PGD_MASKED_BITS 0 -/* shift to put page number into pte */ -#define PTE_RPN_SHIFT (17) - -#ifdef STRICT_MM_TYPECHECKS -#define __real_pte(e,p) ((real_pte_t){(e)}) -#define __rpte_to_pte(r) ((r).pte) -#else -#define __real_pte(e,p) (e) -#define __rpte_to_pte(r) (__pte(r)) -#endif -#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12) - -#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ - do { \ - index = 0; \ - shift = mmu_psize_defs[psize].shift; \ - -#define pte_iterate_hashed_end() } while(0) - -#ifdef CONFIG_PPC_HAS_HASH_64K -#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr) -#else -#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K -#endif /* * 4-level page tables related bits @@ -112,6 +66,9 @@ #define pud_ERROR(e) \ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) +/* + * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */ #define remap_4k_pfn(vma, addr, pfn, prot) \ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) -#endif /* _ASM_POWERPC_PGTABLE_4K_H */ + +#endif /* _ASM_POWERPC_PGTABLE_PPC64_4K_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h new file mode 100644 index 00000000000..6cc085b945a --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h @@ -0,0 +1,42 @@ +#ifndef _ASM_POWERPC_PGTABLE_PPC64_64K_H +#define _ASM_POWERPC_PGTABLE_PPC64_64K_H + +#include <asm-generic/pgtable-nopud.h> + + +#define PTE_INDEX_SIZE 12 +#define PMD_INDEX_SIZE 12 +#define PUD_INDEX_SIZE 0 +#define PGD_INDEX_SIZE 4 + +#ifndef __ASSEMBLY__ + +#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* With 4k base page size, hugepage PTEs go at the PMD level */ +#define MIN_HUGEPTE_SHIFT PAGE_SHIFT + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +#endif /* __ASSEMBLY__ */ + +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS 0x1ff +/* Bits to mask out from a PGD/PUD to get to the PMD page */ +#define PUD_MASKED_BITS 0x1ff + +#endif /* _ASM_POWERPC_PGTABLE_PPC64_64K_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index c627877fcf1..542073836b2 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -11,9 +11,9 @@ #endif /* __ASSEMBLY__ */ #ifdef CONFIG_PPC_64K_PAGES -#include <asm/pgtable-64k.h> +#include <asm/pgtable-ppc64-64k.h> #else -#include <asm/pgtable-4k.h> +#include <asm/pgtable-ppc64-4k.h> #endif #define FIRST_USER_ADDRESS 0 @@ -25,6 +25,8 @@ PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT) #define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE) + +/* Some sanity checking */ #if TASK_SIZE_USER64 > PGTABLE_RANGE #error TASK_SIZE_USER64 exceeds pagetable range #endif @@ -33,7 +35,6 @@ #error TASK_SIZE_USER64 exceeds user VSID range #endif - /* * Define the address range of the vmalloc VM area. */ @@ -76,29 +77,26 @@ /* - * Common bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. Additional - * bits may be defined in pgtable-*.h + * Include the PTE bits definitions */ -#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ -#define _PAGE_USER 0x0002 /* matches one of the PP bits */ -#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ -#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ -#define _PAGE_GUARDED 0x0008 -#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x0080 /* C: page changed */ -#define _PAGE_ACCESSED 0x0100 /* R: page referenced */ -#define _PAGE_RW 0x0200 /* software: user write access allowed */ -#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ - -/* Strong Access Ordering */ -#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) - -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) - -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) +#include <asm/pte-hash64.h> + +/* To make some generic powerpc code happy */ +#ifndef _PAGE_HWEXEC +#define _PAGE_HWEXEC 0 +#endif + +/* Some other useful definitions */ +#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT)) +#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) + +/* _PAGE_CHG_MASK masks of bits that are to be preserved accross + * pgprot changes + */ +#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_SPECIAL) + + /* __pgprot defined in arch/powerpc/include/asm/page.h */ #define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) @@ -117,16 +115,9 @@ #define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE) #define HAVE_PAGE_AGP -#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | \ - _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ - _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ - _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) -/* PTEIDX nibble */ -#define _PTEIDX_SECONDARY 0x8 -#define _PTEIDX_GROUP_IX 0x7 +/* We always have _PAGE_SPECIAL on 64 bit */ +#define __HAVE_ARCH_PTE_SPECIAL -/* To make some generic powerpc code happy */ -#define _PAGE_HWEXEC 0 /* * POWER4 and newer have per page execute protection, older chips can only @@ -163,6 +154,38 @@ #ifndef __ASSEMBLY__ /* + * This is the default implementation of various PTE accessors, it's + * used in all cases except Book3S with 64K pages where we have a + * concept of sub-pages + */ +#ifndef __real_pte + +#ifdef STRICT_MM_TYPECHECKS +#define __real_pte(e,p) ((real_pte_t){(e)}) +#define __rpte_to_pte(r) ((r).pte) +#else +#define __real_pte(e,p) (e) +#define __rpte_to_pte(r) (__pte(r)) +#endif +#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12) + +#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ + do { \ + index = 0; \ + shift = mmu_psize_defs[psize].shift; \ + +#define pte_iterate_hashed_end() } while(0) + +#ifdef CONFIG_PPC_HAS_HASH_64K +#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr) +#else +#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K +#endif + +#endif /* __real_pte */ + + +/* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. * diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h new file mode 100644 index 00000000000..07630faae02 --- /dev/null +++ b/arch/powerpc/include/asm/pte-40x.h @@ -0,0 +1,64 @@ +#ifndef _ASM_POWERPC_PTE_40x_H +#define _ASM_POWERPC_PTE_40x_H +#ifdef __KERNEL__ + +/* + * At present, all PowerPC 400-class processors share a similar TLB + * architecture. The instruction and data sides share a unified, + * 64-entry, fully-associative TLB which is maintained totally under + * software control. In addition, the instruction side has a + * hardware-managed, 4-entry, fully-associative TLB which serves as a + * first level to the shared TLB. These two TLBs are known as the UTLB + * and ITLB, respectively (see "mmu.h" for definitions). + * + * There are several potential gotchas here. The 40x hardware TLBLO + * field looks like this: + * + * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * RPN..................... 0 0 EX WR ZSEL....... W I M G + * + * Where possible we make the Linux PTE bits match up with this + * + * - bits 20 and 21 must be cleared, because we use 4k pages (40x can + * support down to 1k pages), this is done in the TLBMiss exception + * handler. + * - We use only zones 0 (for kernel pages) and 1 (for user pages) + * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB + * miss handler. Bit 27 is PAGE_USER, thus selecting the correct + * zone. + * - PRESENT *must* be in the bottom two bits because swap cache + * entries use the top 30 bits. Because 40x doesn't support SMP + * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 + * is cleared in the TLB miss handler before the TLB entry is loaded. + * - All other bits of the PTE are loaded into TLBLO without + * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for + * software PTE bits. We actually use use bits 21, 24, 25, and + * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and + * PRESENT. + */ + +#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ +#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ +#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ +#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ +#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ +#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ +#define _PAGE_RW 0x040 /* software: Writes permitted */ +#define _PAGE_DIRTY 0x080 /* software: dirty page */ +#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ +#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ +#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ + +#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ +#define _PMD_BAD 0x802 +#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ +#define _PMD_SIZE_4M 0x0c0 +#define _PMD_SIZE_16M 0x0e0 + +#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) + +/* Until my rework is finished, 40x still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_40x_H */ diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h new file mode 100644 index 00000000000..37e98bcf83e --- /dev/null +++ b/arch/powerpc/include/asm/pte-44x.h @@ -0,0 +1,102 @@ +#ifndef _ASM_POWERPC_PTE_44x_H +#define _ASM_POWERPC_PTE_44x_H +#ifdef __KERNEL__ + +/* + * Definitions for PPC440 + * + * Because of the 3 word TLB entries to support 36-bit addressing, + * the attribute are difficult to map in such a fashion that they + * are easily loaded during exception processing. I decided to + * organize the entry so the ERPN is the only portion in the + * upper word of the PTE and the attribute bits below are packed + * in as sensibly as they can be in the area below a 4KB page size + * oriented RPN. This at least makes it easy to load the RPN and + * ERPN fields in the TLB. -Matt + * + * This isn't entirely true anymore, at least some bits are now + * easier to move into the TLB from the PTE. -BenH. + * + * Note that these bits preclude future use of a page size + * less than 4KB. + * + * + * PPC 440 core has following TLB attribute fields; + * + * TLB1: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * RPN................................. - - - - - - ERPN....... + * + * TLB2: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR + * + * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional + * TLB2 storage attibute fields. Those are: + * + * TLB2: + * 0...10 11 12 13 14 15 16...31 + * no change WL1 IL1I IL1D IL2I IL2D no change + * + * There are some constrains and options, to decide mapping software bits + * into TLB entry. + * + * - PRESENT *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - FILE *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - CACHE COHERENT bit (M) has no effect on original PPC440 cores, + * because it doesn't support SMP. However, some later 460 variants + * have -some- form of SMP support and so I keep the bit there for + * future use + * + * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used + * for memory protection related functions (see PTE structure in + * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the + * above bits. Note that the bit values are CPU specific, not architecture + * specific. + * + * The kernel PTE entry holds an arch-dependent swp_entry structure under + * certain situations. In other words, in such situations some portion of + * the PTE bits are used as a swp_entry. In the PPC implementation, the + * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still + * hold protection values. That means the three protection bits are + * reserved for both PTE and SWAP entry at the most significant three + * LSBs. + * + * There are three protection bits available for SWAP entry: + * _PAGE_PRESENT + * _PAGE_FILE + * _PAGE_HASHPTE (if HW has) + * + * So those three bits have to be inside of 0-2nd LSB of PTE. + * + */ + +#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ +#define _PAGE_RW 0x00000002 /* S: Write permission */ +#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ +#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ +#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ +#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ +#define _PAGE_SPECIAL 0x00000020 /* S: Special page */ +#define _PAGE_USER 0x00000040 /* S: User page */ +#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ +#define _PAGE_GUARDED 0x00000100 /* H: G bit */ +#define _PAGE_COHERENT 0x00000200 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ + +/* TODO: Add large page lowmem mapping support */ +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffff00000000ULL + + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_44x_H */ diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h new file mode 100644 index 00000000000..b07acfd330b --- /dev/null +++ b/arch/powerpc/include/asm/pte-8xx.h @@ -0,0 +1,64 @@ +#ifndef _ASM_POWERPC_PTE_8xx_H +#define _ASM_POWERPC_PTE_8xx_H +#ifdef __KERNEL__ + +/* + * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. + * We also use the two level tables, but we can put the real bits in them + * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, + * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has + * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit + * based upon user/super access. The TLB does not have accessed nor write + * protect. We assume that if the TLB get loaded with an entry it is + * accessed, and overload the changed bit for write protect. We use + * two bits in the software pte that are supposed to be set to zero in + * the TLB entry (24 and 25) for these indicators. Although the level 1 + * descriptor contains the guarded and writethrough/copyback bits, we can + * set these at the page level since they get copied from the Mx_TWC + * register when the TLB entry is loaded. We will use bit 27 for guard, since + * that is where it exists in the MD_TWC, and bit 26 for writethrough. + * These will get masked from the level 2 descriptor at TLB load time, and + * copied to the MD_TWC before it gets loaded. + * Large page sizes added. We currently support two sizes, 4K and 8M. + * This also allows a TLB hander optimization because we can directly + * load the PMD into MD_TWC. The 8M pages are only used for kernel + * mapping of well known areas. The PMD (PGD) entries contain control + * flags in addition to the address, so care must be taken that the + * software no longer assumes these are only pointers. + */ + +/* Definitions for 8xx embedded chips. */ +#define _PAGE_PRESENT 0x0001 /* Page is valid */ +#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ +#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ +#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ + +/* These five software bits must be masked out when the entry is loaded + * into the TLB. + */ +#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ +#define _PAGE_GUARDED 0x0010 /* software: guarded access */ +#define _PAGE_DIRTY 0x0020 /* software: page changed */ +#define _PAGE_RW 0x0040 /* software: user write access allowed */ +#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ + +/* Setting any bits in the nibble with the follow two controls will + * require a TLB exception handler change. It is assumed unused bits + * are always zero. + */ +#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ +#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ + +#define _PMD_PRESENT 0x0001 +#define _PMD_BAD 0x0ff0 +#define _PMD_PAGE_MASK 0x000c +#define _PMD_PAGE_8M 0x000c + +#define _PTE_NONE_MASK _PAGE_ACCESSED + +/* Until my rework is finished, 8xx still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_8xx_H */ diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h new file mode 100644 index 00000000000..10820f58acf --- /dev/null +++ b/arch/powerpc/include/asm/pte-fsl-booke.h @@ -0,0 +1,48 @@ +#ifndef _ASM_POWERPC_PTE_FSL_BOOKE_H +#define _ASM_POWERPC_PTE_FSL_BOOKE_H +#ifdef __KERNEL__ + +/* PTE bit definitions for Freescale BookE SW loaded TLB MMU based + * processors + * + MMU Assist Register 3: + + 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 + RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR + + - PRESENT *must* be in the bottom three bits because swap cache + entries use the top 29 bits. + + - FILE *must* be in the bottom three bits because swap cache + entries use the top 29 bits. +*/ + +/* Definitions for FSL Book-E Cores */ +#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ +#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ +#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ +#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ +#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ +#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ +#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ + +#define _PAGE_ENDIAN 0x00040 /* H: E bit */ +#define _PAGE_GUARDED 0x00080 /* H: G bit */ +#define _PAGE_COHERENT 0x00100 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ +#define _PAGE_SPECIAL 0x00800 /* S: Special page */ + +#ifdef CONFIG_PTE_64BIT +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffffffff0000ULL +/* We extend the size of the PTE flags area when using 64-bit PTEs */ +#define PTE_RPN_SHIFT (PAGE_SHIFT + 8) +#endif + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */ diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h new file mode 100644 index 00000000000..6afe22b02f2 --- /dev/null +++ b/arch/powerpc/include/asm/pte-hash32.h @@ -0,0 +1,49 @@ +#ifndef _ASM_POWERPC_PTE_HASH32_H +#define _ASM_POWERPC_PTE_HASH32_H +#ifdef __KERNEL__ + +/* + * The "classic" 32-bit implementation of the PowerPC MMU uses a hash + * table containing PTEs, together with a set of 16 segment registers, + * to define the virtual to physical address mapping. + * + * We use the hash table as an extended TLB, i.e. a cache of currently + * active mappings. We maintain a two-level page table tree, much + * like that used by the i386, for the sake of the Linux memory + * management code. Low-level assembler code in hash_low_32.S + * (procedure hash_page) is responsible for extracting ptes from the + * tree and putting them into the hash table when necessary, and + * updating the accessed and modified bits in the page table tree. + */ + +#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ +#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ +#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ +#define _PAGE_USER 0x004 /* usermode access allowed */ +#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ +#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x080 /* C: page changed */ +#define _PAGE_ACCESSED 0x100 /* R: page referenced */ +#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ +#define _PAGE_RW 0x400 /* software: user write access allowed */ +#define _PAGE_SPECIAL 0x800 /* software: Special page */ + +#ifdef CONFIG_PTE_64BIT +/* We never clear the high word of the pte */ +#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE) +#else +#define _PTE_NONE_MASK _PAGE_HASHPTE +#endif + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +/* Hash table based platforms need atomic updates of the linux PTE */ +#define PTE_ATOMIC_UPDATES 1 + + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_HASH32_H */ diff --git a/arch/powerpc/include/asm/pte-hash64-4k.h b/arch/powerpc/include/asm/pte-hash64-4k.h new file mode 100644 index 00000000000..29fdc158fe3 --- /dev/null +++ b/arch/powerpc/include/asm/pte-hash64-4k.h @@ -0,0 +1,20 @@ +/* To be include by pgtable-hash64.h only */ + +/* PTE bits */ +#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ +#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ +#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ +#define _PAGE_F_SECOND _PAGE_SECONDARY +#define _PAGE_F_GIX _PAGE_GROUP_IX +#define _PAGE_SPECIAL 0x10000 /* software: special page */ + +/* There is no 4K PFN hack on 4K pages */ +#define _PAGE_4K_PFN 0 + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ + _PAGE_SECONDARY | _PAGE_GROUP_IX) + +/* shift to put page number into pte */ +#define PTE_RPN_SHIFT (17) + diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index 7389003349a..e05d26fa372 100644 --- a/arch/powerpc/include/asm/pgtable-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -1,76 +1,6 @@ -#ifndef _ASM_POWERPC_PGTABLE_64K_H -#define _ASM_POWERPC_PGTABLE_64K_H - -#include <asm-generic/pgtable-nopud.h> - - -#define PTE_INDEX_SIZE 12 -#define PMD_INDEX_SIZE 12 -#define PUD_INDEX_SIZE 0 -#define PGD_INDEX_SIZE 4 - -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) -#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) - -#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) -#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) - -#ifdef CONFIG_PPC_SUBPAGE_PROT -/* - * For the sub-page protection option, we extend the PGD with one of - * these. Basically we have a 3-level tree, with the top level being - * the protptrs array. To optimize speed and memory consumption when - * only addresses < 4GB are being protected, pointers to the first - * four pages of sub-page protection words are stored in the low_prot - * array. - * Each page of sub-page protection words protects 1GB (4 bytes - * protects 64k). For the 3-level tree, each page of pointers then - * protects 8TB. - */ -struct subpage_prot_table { - unsigned long maxaddr; /* only addresses < this are protected */ - unsigned int **protptrs[2]; - unsigned int *low_prot[4]; -}; - -#undef PGD_TABLE_SIZE -#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ - sizeof(struct subpage_prot_table)) - -#define SBP_L1_BITS (PAGE_SHIFT - 2) -#define SBP_L2_BITS (PAGE_SHIFT - 3) -#define SBP_L1_COUNT (1 << SBP_L1_BITS) -#define SBP_L2_COUNT (1 << SBP_L2_BITS) -#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) -#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) - -extern void subpage_prot_free(pgd_t *pgd); - -static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) -{ - return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); -} -#endif /* CONFIG_PPC_SUBPAGE_PROT */ -#endif /* __ASSEMBLY__ */ - -/* With 4k base page size, hugepage PTEs go at the PMD level */ -#define MIN_HUGEPTE_SHIFT PAGE_SHIFT - -/* PMD_SHIFT determines what a second-level page table entry can map */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) +/* To be include by pgtable-hash64.h only */ /* Additional PTE bits (don't change without checking asm in hash_low.S) */ -#define __HAVE_ARCH_PTE_SPECIAL #define _PAGE_SPECIAL 0x00000400 /* software: special page */ #define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */ #define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */ @@ -107,21 +37,15 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) * of addressable physical space, or 46 bits for the special 4k PFNs. */ #define PTE_RPN_SHIFT (30) -#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT)) -#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) - -/* _PAGE_CHG_MASK masks of bits that are to be preserved accross - * pgprot changes - */ -#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_SPECIAL) -/* Bits to mask out from a PMD to get to the PTE page */ -#define PMD_MASKED_BITS 0x1ff -/* Bits to mask out from a PGD/PUD to get to the PMD page */ -#define PUD_MASKED_BITS 0x1ff +#ifndef __ASSEMBLY__ -/* Manipulate "rpte" values */ +/* + * With 64K pages on hash table, we have a special PTE format that + * uses a second "half" of the page table to encode sub-page information + * in order to deal with 64K made of 4K HW pages. Thus we override the + * generic accessors and iterators here + */ #define __real_pte(e,p) ((real_pte_t) { \ (e), pte_val(*((p) + PTRS_PER_PTE)) }) #define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \ @@ -130,7 +54,6 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) #define __rpte_sub_valid(rpte, index) \ (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index))) - /* Trick: we set __end to va + 64k, which happens works for * a 16M page as well as we want only one iteration */ @@ -152,4 +75,41 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) -#endif /* _ASM_POWERPC_PGTABLE_64K_H */ + +#ifdef CONFIG_PPC_SUBPAGE_PROT +/* + * For the sub-page protection option, we extend the PGD with one of + * these. Basically we have a 3-level tree, with the top level being + * the protptrs array. To optimize speed and memory consumption when + * only addresses < 4GB are being protected, pointers to the first + * four pages of sub-page protection words are stored in the low_prot + * array. + * Each page of sub-page protection words protects 1GB (4 bytes + * protects 64k). For the 3-level tree, each page of pointers then + * protects 8TB. + */ +struct subpage_prot_table { + unsigned long maxaddr; /* only addresses < this are protected */ + unsigned int **protptrs[2]; + unsigned int *low_prot[4]; +}; + +#undef PGD_TABLE_SIZE +#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ + sizeof(struct subpage_prot_table)) + +#define SBP_L1_BITS (PAGE_SHIFT - 2) +#define SBP_L2_BITS (PAGE_SHIFT - 3) +#define SBP_L1_COUNT (1 << SBP_L1_BITS) +#define SBP_L2_COUNT (1 << SBP_L2_BITS) +#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) +#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) + +extern void subpage_prot_free(pgd_t *pgd); + +static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) +{ + return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); +} +#endif /* CONFIG_PPC_SUBPAGE_PROT */ +#endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h new file mode 100644 index 00000000000..62766636cc1 --- /dev/null +++ b/arch/powerpc/include/asm/pte-hash64.h @@ -0,0 +1,47 @@ +#ifndef _ASM_POWERPC_PTE_HASH64_H +#define _ASM_POWERPC_PTE_HASH64_H +#ifdef __KERNEL__ + +/* + * Common bits between 4K and 64K pages in a linux-style PTE. + * These match the bits in the (hardware-defined) PowerPC PTE as closely + * as possible. Additional bits may be defined in pgtable-hash64-*.h + */ +#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ +#define _PAGE_USER 0x0002 /* matches one of the PP bits */ +#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ +#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ +#define _PAGE_GUARDED 0x0008 +#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x0080 /* C: page changed */ +#define _PAGE_ACCESSED 0x0100 /* R: page referenced */ +#define _PAGE_RW 0x0200 /* software: user write access allowed */ +#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ + +/* Strong Access Ordering */ +#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) + +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) + +#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) + +/* PTEIDX nibble */ +#define _PTEIDX_SECONDARY 0x8 +#define _PTEIDX_GROUP_IX 0x7 + +#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | \ + _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ + _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) + + +#ifdef CONFIG_PPC_64K_PAGES +#include <asm/pte-hash64-64k.h> +#else +#include <asm/pte-hash64-4k.h> +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PTE_HASH64_H */ diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 6418ceea44b..cd21e5e6b04 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -15,6 +15,7 @@ #include <linux/init.h> extern void (*udbg_putc)(char c); +extern void (*udbg_flush)(void); extern int (*udbg_getc)(void); extern int (*udbg_getc_poll)(void); diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index dfec3d2790b..71901fbda4a 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -75,7 +75,7 @@ obj-y += time.o prom.o traps.o setup-common.o \ obj-$(CONFIG_PPC32) += entry_32.o setup_32.o obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o +obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 638838691b2..ccea2431ddf 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -731,6 +731,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_750, .machine_check = machine_check_generic, .platform = "ppc750", + .oprofile_cpu_type = "ppc/750", + .oprofile_type = PPC_OPROFILE_G4, }, { /* 750FX rev 2.0 must disable HID0[DPM] */ .pvr_mask = 0xffffffff, @@ -746,6 +748,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_750, .machine_check = machine_check_generic, .platform = "ppc750", + .oprofile_cpu_type = "ppc/750", + .oprofile_type = PPC_OPROFILE_G4, }, { /* 750FX (All revs except 2.0) */ .pvr_mask = 0xffff0000, @@ -761,6 +765,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_750fx, .machine_check = machine_check_generic, .platform = "ppc750", + .oprofile_cpu_type = "ppc/750", + .oprofile_type = PPC_OPROFILE_G4, }, { /* 750GX */ .pvr_mask = 0xffff0000, @@ -776,6 +782,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_750fx, .machine_check = machine_check_generic, .platform = "ppc750", + .oprofile_cpu_type = "ppc/750", + .oprofile_type = PPC_OPROFILE_G4, }, { /* 740/750 (L2CR bit need fixup for 740) */ .pvr_mask = 0xffff0000, diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index a1c4cfd25de..f8c2e6b6f45 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -108,18 +108,21 @@ __start: * because OF may have I/O devices mapped into that area * (particularly on CHRP). */ -#ifdef CONFIG_PPC_MULTIPLATFORM cmpwi 0,r5,0 beq 1f +#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE /* find out where we are now */ bcl 20,31,$+4 0: mflr r8 /* r8 = runtime addr here */ addis r8,r8,(_stext - 0b)@ha addi r8,r8,(_stext - 0b)@l /* current runtime base addr */ bl prom_init +#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */ + + /* We never return. We also hit that trap if trying to boot + * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */ trap -#endif /* * Check for BootX signature when supporting PowerMac and branch to diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index ebaedafc8e6..50ef505b8fb 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1360,6 +1360,7 @@ _GLOBAL(__start_initialization_multiplatform) b .__after_prom_start _INIT_STATIC(__boot_from_prom) +#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE /* Save parameters */ mr r31,r3 mr r30,r4 @@ -1390,7 +1391,10 @@ _INIT_STATIC(__boot_from_prom) /* Do all of the interaction with OF client interface */ mr r8,r26 bl .prom_init - /* We never return */ +#endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */ + + /* We never return. We also hit that trap if trying to boot + * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */ trap _STATIC(__after_prom_start) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 23b8b5e36f9..48ea2008b20 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -171,7 +171,7 @@ int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *)v, j; struct irqaction *action; - irq_desc_t *desc; + struct irq_desc *desc; unsigned long flags; if (i == 0) { @@ -1038,7 +1038,7 @@ arch_initcall(irq_late_init); static int virq_debug_show(struct seq_file *m, void *private) { unsigned long flags; - irq_desc_t *desc; + struct irq_desc *desc; const char *p; char none[] = "none"; int i; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 2ad17315fc8..2603f20984c 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1482,7 +1482,7 @@ void __init pcibios_resource_survey(void) * we proceed to assigning things that were left unassigned */ if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) { - pr_debug("PCI: Assigning unassigned resouces...\n"); + pr_debug("PCI: Assigning unassigned resources...\n"); pci_assign_unassigned_resources(); } diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7f1b33d5e30..4d5ebb46b2c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2283,6 +2283,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_init_stdout(); + prom_printf("Preparing to boot %s", PTRRELOC((char *)linux_banner)); + /* * Get default machine type. At this point, we do not differentiate * between pSeries SMP and pSeries LPAR diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index ea3a2ec03ff..1ac136b128f 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -20,7 +20,7 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush _end enter_prom memcpy memset reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 -reloc_got2 kernstart_addr memstart_addr" +reloc_got2 kernstart_addr memstart_addr linux_banner" NM="$1" OBJ="$2" diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 7d6c9bb8c77..fc9af47e212 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -18,6 +18,7 @@ #include <asm/udbg.h> void (*udbg_putc)(char c); +void (*udbg_flush)(void); int (*udbg_getc)(void); int (*udbg_getc_poll)(void); @@ -76,6 +77,9 @@ void udbg_puts(const char *s) while ((c = *s++) != '\0') udbg_putc(c); } + + if (udbg_flush) + udbg_flush(); } #if 0 else { @@ -98,6 +102,9 @@ int udbg_write(const char *s, int n) } } + if (udbg_flush) + udbg_flush(); + return n - remain; } diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 7b7da8cfd5e..0362a891e54 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -48,14 +48,21 @@ struct NS16550 { static struct NS16550 __iomem *udbg_comport; -static void udbg_550_putc(char c) +static void udbg_550_flush(void) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) /* wait for idle */; - out_8(&udbg_comport->thr, c); + } +} + +static void udbg_550_putc(char c) +{ + if (udbg_comport) { if (c == '\n') udbg_550_putc('\r'); + udbg_550_flush(); + out_8(&udbg_comport->thr, c); } } @@ -108,6 +115,7 @@ void udbg_init_uart(void __iomem *comport, unsigned int speed, /* Clear & enable FIFOs */ out_8(&udbg_comport->fcr ,0x07); udbg_putc = udbg_550_putc; + udbg_flush = udbg_550_flush; udbg_getc = udbg_550_getc; udbg_getc_poll = udbg_550_getc_poll; } @@ -149,14 +157,21 @@ unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock) } #ifdef CONFIG_PPC_MAPLE -void udbg_maple_real_putc(char c) +void udbg_maple_real_flush(void) { if (udbg_comport) { while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) /* wait for idle */; - real_writeb(c, &udbg_comport->thr); eieio(); + } +} + +void udbg_maple_real_putc(char c) +{ + if (udbg_comport) { if (c == '\n') udbg_maple_real_putc('\r'); + udbg_maple_real_flush(); + real_writeb(c, &udbg_comport->thr); eieio(); } } @@ -165,20 +180,28 @@ void __init udbg_init_maple_realmode(void) udbg_comport = (struct NS16550 __iomem *)0xf40003f8; udbg_putc = udbg_maple_real_putc; + udbg_flush = udbg_maple_real_flush; udbg_getc = NULL; udbg_getc_poll = NULL; } #endif /* CONFIG_PPC_MAPLE */ #ifdef CONFIG_PPC_PASEMI -void udbg_pas_real_putc(char c) +void udbg_pas_real_flush(void) { if (udbg_comport) { while ((real_205_readb(&udbg_comport->lsr) & LSR_THRE) == 0) /* wait for idle */; - real_205_writeb(c, &udbg_comport->thr); eieio(); + } +} + +void udbg_pas_real_putc(char c) +{ + if (udbg_comport) { if (c == '\n') udbg_pas_real_putc('\r'); + udbg_pas_real_flush(); + real_205_writeb(c, &udbg_comport->thr); eieio(); } } @@ -187,6 +210,7 @@ void udbg_init_pas_realmode(void) udbg_comport = (struct NS16550 __iomem *)0xfcff03f8UL; udbg_putc = udbg_pas_real_putc; + udbg_flush = udbg_pas_real_flush; udbg_getc = NULL; udbg_getc_poll = NULL; } @@ -195,14 +219,21 @@ void udbg_init_pas_realmode(void) #ifdef CONFIG_PPC_EARLY_DEBUG_44x #include <platforms/44x/44x.h> -static void udbg_44x_as1_putc(char c) +static int udbg_44x_as1_flush(void) { if (udbg_comport) { while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0) /* wait for idle */; - as1_writeb(c, &udbg_comport->thr); eieio(); + } +} + +static void udbg_44x_as1_putc(char c) +{ + if (udbg_comport) { if (c == '\n') udbg_44x_as1_putc('\r'); + udbg_44x_as1_flush(); + as1_writeb(c, &udbg_comport->thr); eieio(); } } @@ -222,19 +253,27 @@ void __init udbg_init_44x_as1(void) (struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR; udbg_putc = udbg_44x_as1_putc; + udbg_flush = udbg_44x_as1_flush; udbg_getc = udbg_44x_as1_getc; } #endif /* CONFIG_PPC_EARLY_DEBUG_44x */ #ifdef CONFIG_PPC_EARLY_DEBUG_40x -static void udbg_40x_real_putc(char c) +static void udbg_40x_real_flush(void) { if (udbg_comport) { while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) /* wait for idle */; - real_writeb(c, &udbg_comport->thr); eieio(); + } +} + +static void udbg_40x_real_putc(char c) +{ + if (udbg_comport) { if (c == '\n') udbg_40x_real_putc('\r'); + udbg_40x_real_flush(); + real_writeb(c, &udbg_comport->thr); eieio(); } } @@ -254,6 +293,7 @@ void __init udbg_init_40x_realmode(void) CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR; udbg_putc = udbg_40x_real_putc; + udbg_flush = udbg_40x_real_flush; udbg_getc = udbg_40x_real_getc; udbg_getc_poll = NULL; } diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile index f9e506a735a..0c16ab947f1 100644 --- a/arch/powerpc/math-emu/Makefile +++ b/arch/powerpc/math-emu/Makefile @@ -1,6 +1,4 @@ -obj-y := math.o fmr.o lfd.o stfd.o - obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ fctiw.o fctiwz.o fdiv.o fdivs.o \ fmadd.o fmadds.o fmsub.o fmsubs.o \ @@ -9,7 +7,8 @@ obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ fres.o frsp.o frsqrte.o fsel.o lfs.o \ fsqrt.o fsqrts.o fsub.o fsubs.o \ mcrfs.o mffs.o mtfsb0.o mtfsb1.o \ - mtfsf.o mtfsfi.o stfiwx.o stfs.o + mtfsf.o mtfsfi.o stfiwx.o stfs.o \ + math.o fmr.o lfd.o stfd.o obj-$(CONFIG_SPE) += math_efp.o diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 953cc4a1cde..6d2838fc879 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -6,7 +6,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -obj-y := fault.o mem.o pgtable.o \ +obj-y := fault.o mem.o pgtable.o gup.o \ init_$(CONFIG_WORD_SIZE).o \ pgtable_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ @@ -14,7 +14,7 @@ obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC64) += hash_utils_64.o \ slb_low.o slb.o stab.o \ - gup.o mmap.o $(hash-y) + mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_hash$(CONFIG_WORD_SIZE).o \ diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c index 28a114db3ba..bc400c78c97 100644 --- a/arch/powerpc/mm/gup.c +++ b/arch/powerpc/mm/gup.c @@ -14,6 +14,8 @@ #include <linux/rwsem.h> #include <asm/pgtable.h> +#ifdef __HAVE_ARCH_PTE_SPECIAL + /* * The performance critical leaf functions are made noinline otherwise gcc * inlines everything into a single function which results in too much @@ -151,8 +153,11 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, unsigned long addr, len, end; unsigned long next; pgd_t *pgdp; - int psize, nr = 0; + int nr = 0; +#ifdef CONFIG_PPC64 unsigned int shift; + int psize; +#endif pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); @@ -205,8 +210,13 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, */ local_irq_disable(); +#ifdef CONFIG_PPC64 + /* Those bits are related to hugetlbfs implementation and only exist + * on 64-bit for now + */ psize = get_slice_psize(mm, addr); shift = mmu_psize_defs[psize].shift; +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_HUGETLB_PAGE if (unlikely(mmu_huge_psizes[psize])) { @@ -236,7 +246,9 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, do { pgd_t pgd = *pgdp; +#ifdef CONFIG_PPC64 VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); +#endif pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd_val(pgd)); next = pgd_addr_end(addr, end); @@ -279,3 +291,5 @@ slow_irqon: return ret; } } + +#endif /* __HAVE_ARCH_PTE_SPECIAL */ diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 326852c78b8..4dac9b0525a 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -12,7 +12,7 @@ config PPC_MPC5121 config MPC5121_ADS bool "Freescale MPC5121E ADS" - depends on PPC_MULTIPLATFORM && PPC32 + depends on 6xx select DEFAULT_UIMAGE select PPC_MPC5121 select MPC5121_ADS_CPLD @@ -21,7 +21,7 @@ config MPC5121_ADS config MPC5121_GENERIC bool "Generic support for simple MPC5121 based boards" - depends on PPC_MULTIPLATFORM && PPC32 + depends on 6xx select DEFAULT_UIMAGE select PPC_MPC5121 help diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 75f82ab0616..8b8e9560a31 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -1,6 +1,6 @@ config PPC_MPC52xx bool "52xx-based boards" - depends on PPC_MULTIPLATFORM && PPC32 + depends on 6xx select PPC_CLOCK select PPC_PCI_CHOICE diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 30f008b2f92..7c7df400382 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -1,6 +1,6 @@ menuconfig PPC_82xx bool "82xx-based boards (PQ II)" - depends on 6xx && PPC_MULTIPLATFORM + depends on 6xx if PPC_82xx diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 83c664afc89..437d29a59d7 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -1,6 +1,6 @@ menuconfig PPC_83xx bool "83xx-based boards" - depends on 6xx && PPC_MULTIPLATFORM + depends on 6xx select PPC_UDBG_16550 select PPC_PCI_CHOICE select FSL_PCI if PCI diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 81cee7bbf2d..66f29235ff0 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -106,8 +106,6 @@ static void __init ksi8560_pic_init(void) cpm2_pic_init(np); of_node_put(np); set_irq_chained_handler(irq, cpm2_cascade); - - setup_irq(0, NULL); #endif } diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 79a0df17078..cc0b0db8a6f 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -21,6 +21,7 @@ #include <asm/page.h> #include <asm/mpic.h> #include <asm/cacheflush.h> +#include <asm/dbell.h> #include <sysdev/fsl_soc.h> @@ -80,10 +81,8 @@ smp_85xx_kick_cpu(int nr) } static void __init -smp_85xx_setup_cpu(int cpu_nr) +smp_85xx_basic_setup(int cpu_nr) { - mpic_setup_this_cpu(); - /* Clear any pending timer interrupts */ mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); @@ -91,15 +90,43 @@ smp_85xx_setup_cpu(int cpu_nr) mtspr(SPRN_TCR, TCR_DIE); } +static void __init +smp_85xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); + + smp_85xx_basic_setup(cpu_nr); +} + struct smp_ops_t smp_85xx_ops = { - .message_pass = smp_mpic_message_pass, - .probe = smp_mpic_probe, .kick_cpu = smp_85xx_kick_cpu, - .setup_cpu = smp_85xx_setup_cpu, }; -void __init -mpc85xx_smp_init(void) +static int __init smp_dummy_probe(void) { + return NR_CPUS; +} + +void __init mpc85xx_smp_init(void) +{ + struct device_node *np; + + smp_85xx_ops.message_pass = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np) { + smp_85xx_ops.probe = smp_mpic_probe; + smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; + smp_85xx_ops.message_pass = smp_mpic_message_pass; + } else { + smp_85xx_ops.probe = smp_dummy_probe; + smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; + } + + if (cpu_has_feature(CPU_FTR_DBELL)) + smp_85xx_ops.message_pass = smp_dbell_message_pass; + + BUG_ON(!smp_85xx_ops.message_pass); + smp_ops = &smp_85xx_ops; } diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index fa276c689cf..fdaf4ddaa95 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -1,7 +1,7 @@ config PPC_86xx menuconfig PPC_86xx bool "86xx-based boards" - depends on 6xx && PPC_MULTIPLATFORM + depends on 6xx select FSL_SOC select ALTIVEC help @@ -31,6 +31,14 @@ config MPC8610_HPCD help This option enables support for the MPC8610 HPCD board. +config GEF_PPC9A + bool "GE Fanuc PPC9A" + select DEFAULT_UIMAGE + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + This option enables support for GE Fanuc's PPC9A. + config GEF_SBC310 bool "GE Fanuc SBC310" select DEFAULT_UIMAGE @@ -56,7 +64,7 @@ config MPC8641 select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC - default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 + default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A config MPC8610 bool diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 7c080da4523..4b0d7b1aa00 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y) obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y) +obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y) diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c new file mode 100644 index 00000000000..830fd9a23b5 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -0,0 +1,223 @@ +/* + * GE Fanuc PPC9A board support + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) + * Copyright 2006 Freescale Semiconductor Inc. + * + * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpc86xx.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <asm/mpic.h> + +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" +#include "gef_pic.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0) +#else +#define DBG (fmt...) do { } while (0) +#endif + +void __iomem *ppc9a_regs; + +static void __init gef_ppc9a_init_irq(void) +{ + struct device_node *cascade_node = NULL; + + mpc86xx_init_irq(); + + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic-1.00"); + if (!cascade_node) { + printk(KERN_WARNING "PPC9A: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + +static void __init gef_ppc9a_setup_arch(void) +{ + struct device_node *regs; +#ifdef CONFIG_PCI + struct device_node *np; + + for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") { + fsl_add_bridge(np, 1); + } +#endif + + printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n"); + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs"); + if (regs) { + ppc9a_regs = of_iomap(regs, 0); + if (ppc9a_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } +} + +/* Return the PCB revision */ +static unsigned int gef_ppc9a_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread32(ppc9a_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int gef_ppc9a_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread32(ppc9a_regs); + return (reg >> 16) & 0xff; +} + +/* Return the FPGA revision */ +static unsigned int gef_ppc9a_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread32(ppc9a_regs); + return (reg >> 24) & 0xf; +} + +static void gef_ppc9a_show_cpuinfo(struct seq_file *m) +{ + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + + seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(), + ('A' + gef_ppc9a_get_board_rev() - 1)); + seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev()); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); +} + +static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Do not do the fixup on other platforms! */ + if (!machine_is(gef_ppc9a)) + return; + + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); + + /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); + + /* System clock is 48-MHz Oscillator and EHCI Enabled. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + gef_ppc9a_nec_fixup); + +/* + * Called very early, device-tree isn't unflattened + * + * This function is called to determine whether the BSP is compatible with the + * supplied device-tree, which is assumed to be the correct one for the actual + * board. It is expected thati, in the future, a kernel may support multiple + * boards. + */ +static int __init gef_ppc9a_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "gef,ppc9a")) + return 1; + + return 0; +} + +static long __init mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + printk(KERN_DEBUG "Probe platform devices\n"); + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(gef_ppc9a, declare_of_platform_devices); + +define_machine(gef_ppc9a) { + .name = "GE Fanuc PPC9A", + .probe = gef_ppc9a_probe, + .setup_arch = gef_ppc9a_setup_arch, + .init_IRQ = gef_ppc9a_init_irq, + .show_cpuinfo = gef_ppc9a_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 0f20172af84..ba3ce438161 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -153,6 +153,10 @@ static void __init gef_sbc310_nec_fixup(struct pci_dev *pdev) { unsigned int val; + /* Do not do the fixup on other platforms! */ + if (!machine_is(gef_sbc310)) + return; + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); /* Ensure only ports 1 & 2 are enabled */ diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index b4ab3728653..68b9b8fd9f8 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -1,14 +1,5 @@ menu "Platform support" -config PPC_MULTIPLATFORM - bool - depends on PPC64 || 6xx - default y - -config CLASSIC32 - def_bool y - depends on 6xx && PPC_MULTIPLATFORM - source "arch/powerpc/platforms/pseries/Kconfig" source "arch/powerpc/platforms/iseries/Kconfig" source "arch/powerpc/platforms/chrp/Kconfig" @@ -32,12 +23,24 @@ source "arch/powerpc/platforms/amigaone/Kconfig" config PPC_NATIVE bool - depends on PPC_MULTIPLATFORM + depends on 6xx || PPC64 help Support for running natively on the hardware, i.e. without a hypervisor. This option is not user-selectable but should be selected by all platforms that need it. +config PPC_OF_BOOT_TRAMPOLINE + bool "Support booting from Open Firmware or yaboot" + depends on 6xx || PPC64 + default y + help + Support from booting from Open Firmware or yaboot using an + Open Firmware client interface. This enables the kernel to + communicate with open firmware to retrieve system informations + such as the device tree. + + In case of doubt, say Y + config UDBG_RTAS_CONSOLE bool "RTAS based debug console" depends on PPC_RTAS @@ -71,7 +74,7 @@ config PPC_I8259 config U3_DART bool - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 default n config PPC_RTAS @@ -188,7 +191,7 @@ config PPC601_SYNC_FIX config TAU bool "On-chip CPU temperature sensor support" - depends on CLASSIC32 + depends on 6xx help G3 and G4 processors have an on-chip temperature sensor called the 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 9428c0e11b2..9da795e4933 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -57,9 +57,17 @@ config E200 endchoice +# Until we have a choice of exclusive CPU types on 64-bit, we always +# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is +# "classic" MMU + +config PPC_BOOK3S + def_bool y + depends on PPC64 || 6xx + config POWER4_ONLY bool "Optimize for POWER4" - depends on PPC64 + depends on PPC64 && PPC_BOOK3S default n ---help--- Cause the compiler to optimize for POWER4/POWER5/PPC970 processors. @@ -68,16 +76,16 @@ config POWER4_ONLY config POWER3 bool - depends on PPC64 + depends on PPC64 && PPC_BOOK3S default y if !POWER4_ONLY config POWER4 - depends on PPC64 + depends on PPC64 && PPC_BOOK3S def_bool y config TUNE_CELL bool "Optimize for Cell Broadband Engine" - depends on PPC64 + depends on PPC64 && PPC_BOOK3S help Cause the compiler to optimize for the PPE of the Cell Broadband Engine. This will make the code run considerably faster on Cell @@ -147,7 +155,7 @@ config PHYS_64BIT config ALTIVEC bool "AltiVec Support" - depends on CLASSIC32 || POWER4 + depends on 6xx || POWER4 ---help--- This option enables kernel support for the Altivec extensions to the PowerPC processor. The kernel currently supports saving and restoring diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig index 9276a96cede..02247671771 100644 --- a/arch/powerpc/platforms/amigaone/Kconfig +++ b/arch/powerpc/platforms/amigaone/Kconfig @@ -1,6 +1,6 @@ config AMIGAONE bool "Eyetech AmigaOne/MAI Teron" - depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM + depends on 6xx && BROKEN_ON_SMP select PPC_I8259 select PPC_INDIRECT_PCI select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 037f59a4bfe..40e24c39ad0 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -23,7 +23,7 @@ config PPC_CELL_NATIVE config PPC_IBM_CELL_BLADE bool "IBM Cell Blade" - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE select MMIO_NVRAM select PPC_UDBG_16550 @@ -31,7 +31,7 @@ config PPC_IBM_CELL_BLADE config PPC_CELLEB bool "Toshiba's Cell Reference Set 'Celleb' Architecture" - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE select HAS_TXX9_SERIAL select PPC_UDBG_BEAT @@ -40,9 +40,14 @@ config PPC_CELLEB config PPC_CELL_QPACE bool "IBM Cell - QPACE" - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S select PPC_CELL_COMMON +config AXON_MSI + bool + depends on PPC_IBM_CELL_BLADE && PCI_MSI + default y + menu "Cell Broadband Engine options" depends on PPC_CELL diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 43eccb27030..83fafe92264 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \ $(spu-manage-y) \ spufs/ -obj-$(CONFIG_PCI_MSI) += axon_msi.o +obj-$(CONFIG_AXON_MSI) += axon_msi.o # qpace setup obj-$(CONFIG_PPC_CELL_QPACE) += qpace_setup.o diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 9e4f2739341..d6a519e6e1c 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -568,16 +568,17 @@ spufs_regs_write(struct file *file, const char __user *buffer, struct spu_lscsa *lscsa = ctx->csa.lscsa; int ret; - size = min_t(ssize_t, sizeof lscsa->gprs - *pos, size); - if (size <= 0) + if (*pos >= sizeof(lscsa->gprs)) return -EFBIG; + + size = min_t(ssize_t, sizeof(lscsa->gprs) - *pos, size); *pos += size; ret = spu_acquire_saved(ctx); if (ret) return ret; - ret = copy_from_user(lscsa->gprs + *pos - size, + ret = copy_from_user((char *)lscsa->gprs + *pos - size, buffer, size) ? -EFAULT : size; spu_release_saved(ctx); @@ -623,10 +624,11 @@ spufs_fpcr_write(struct file *file, const char __user * buffer, struct spu_lscsa *lscsa = ctx->csa.lscsa; int ret; - size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size); - if (size <= 0) + if (*pos >= sizeof(lscsa->fpcr)) return -EFBIG; + size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size); + ret = spu_acquire_saved(ctx); if (ret) return ret; diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig index 22b4b4e3b6f..37d438bd5b7 100644 --- a/arch/powerpc/platforms/chrp/Kconfig +++ b/arch/powerpc/platforms/chrp/Kconfig @@ -1,6 +1,6 @@ config PPC_CHRP bool "Common Hardware Reference Platform (CHRP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 + depends on 6xx select MPIC select PPC_I8259 select PPC_INDIRECT_PCI diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 4f9f8184d16..291ac9d8cbe 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -1,6 +1,6 @@ config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based boards" - depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM + depends on 6xx && BROKEN_ON_SMP config LINKSTATION bool "Linkstation / Kurobox(HG) from Buffalo" diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index 7ddd0a2c802..647e8778743 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -1,6 +1,6 @@ config PPC_ISERIES bool "IBM Legacy iSeries" - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S select PPC_INDIRECT_IO select PPC_PCI_CHOICE if EMBEDDED diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 701d9297c20..94f44475883 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -214,7 +214,7 @@ void __init iSeries_activate_IRQs() unsigned long flags; for_each_irq (irq) { - irq_desc_t *desc = get_irq_desc(irq); + struct irq_desc *desc = get_irq_desc(irq); if (desc && desc->chip && desc->chip->startup) { spin_lock_irqsave(&desc->lock, flags); diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig index a6467a5591f..1ea621a94c3 100644 --- a/arch/powerpc/platforms/maple/Kconfig +++ b/arch/powerpc/platforms/maple/Kconfig @@ -1,5 +1,5 @@ config PPC_MAPLE - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S bool "Maple 970FX Evaluation Board" select PCI select MPIC diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index 348e0619e3e..a2aeb327d18 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -1,5 +1,5 @@ config PPC_PASEMI - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S bool "PA Semi SoC-based platforms" default n select MPIC diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig index 055990ca8ce..1e1a0873e1d 100644 --- a/arch/powerpc/platforms/powermac/Kconfig +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -1,6 +1,6 @@ config PPC_PMAC bool "Apple PowerMac based machines" - depends on PPC_MULTIPLATFORM + depends on PPC_BOOK3S select MPIC select PCI select PPC_INDIRECT_PCI if PPC32 diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h index c44c89f5e53..d622a8345aa 100644 --- a/arch/powerpc/platforms/powermac/pic.h +++ b/arch/powerpc/platforms/powermac/pic.h @@ -3,7 +3,7 @@ #include <linux/irq.h> -extern struct hw_interrupt_type pmac_pic; +extern struct irq_chip pmac_pic; extern void pmac_pic_init(void); extern int pmac_get_irq(void); diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig index 29d411279b0..bf8330ef2e7 100644 --- a/arch/powerpc/platforms/prep/Kconfig +++ b/arch/powerpc/platforms/prep/Kconfig @@ -1,6 +1,6 @@ config PPC_PREP bool "PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 && BROKEN + depends on 6xx && BROKEN select MPIC select PPC_I8259 select PPC_INDIRECT_PCI diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 920cf7a454b..204ae5c402f 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -1,6 +1,6 @@ config PPC_PS3 bool "Sony PS3" - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S select PPC_CELL select USB_ARCH_HAS_OHCI select USB_OHCI_LITTLE_ENDIAN diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index ddc2a307cd5..c0e6ec240f4 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -1,5 +1,5 @@ config PPC_PSERIES - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC64 && PPC_BOOK3S bool "IBM pSeries & new (POWER5-based) iSeries" select MPIC select PPC_I8259 @@ -25,6 +25,11 @@ config EEH depends on PPC_PSERIES && PCI default y if !EMBEDDED +config PSERIES_MSI + bool + depends on PCI_MSI && EEH + default y + config SCANLOG tristate "Scanlog dump interface" depends on RTAS_PROC && PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index dfe574af2dc..0ce691df595 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_PCI) += pci.o pci_dlpar.o -obj-$(CONFIG_PCI_MSI) += msi.o +obj-$(CONFIG_PSERIES_MSI) += msi.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 3e0d6ef3eca..bf2e1ac4130 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -356,6 +356,27 @@ static int rtas_msi_check_device(struct pci_dev *pdev, int nvec, int type) return 0; } +static int check_msix_entries(struct pci_dev *pdev) +{ + struct msi_desc *entry; + int expected; + + /* There's no way for us to express to firmware that we want + * a discontiguous, or non-zero based, range of MSI-X entries. + * So we must reject such requests. */ + + expected = 0; + list_for_each_entry(entry, &pdev->msi_list, list) { + if (entry->msi_attrib.entry_nr != expected) { + pr_debug("rtas_msi: bad MSI-X entries.\n"); + return -EINVAL; + } + expected++; + } + + return 0; +} + static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) { struct pci_dn *pdn; @@ -367,6 +388,9 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) if (!pdn) return -ENODEV; + if (type == PCI_CAP_ID_MSIX && check_msix_entries(pdev)) + return -EINVAL; + /* * Try the new more explicit firmware interface, if that fails fall * back to the old interface. The old interface is known to never diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 474d176a6ec..fd969f0e312 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -52,6 +52,7 @@ cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */ * the communication processor devices. */ cpm2_map_t __iomem *cpm2_immr; +EXPORT_SYMBOL(cpm2_immr); #define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount of space for CPM as it is larger diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index eacfb13998b..9aa4fe100a0 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -143,7 +143,7 @@ config HOTPLUG_PCI_SHPC config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" - depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE + depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE help Say Y here if you have a RPA system that supports PCI Hotplug. diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c7352f7195e..ecf52e4b80f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -772,7 +772,7 @@ config TXX9_WDT config GEF_WDT tristate "GE Fanuc Watchdog Timer" - depends on GEF_SBC610 || GEF_SBC310 + depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A ---help--- Watchdog timer found in a number of GE Fanuc single board computers. |