aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c2
-rw-r--r--drivers/infiniband/hw/ipath/ipath_driver.c6
-rw-r--r--include/linux/timer.h22
-rw-r--r--include/linux/timex.h2
-rw-r--r--kernel/posix-cpu-timers.c3
-rw-r--r--kernel/relay.c2
-rw-r--r--kernel/time/ntp.c444
-rw-r--r--kernel/timer.c110
8 files changed, 357 insertions, 234 deletions
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 6a0ad196aeb..f085369301b 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -508,7 +508,7 @@ static void __spu_add_to_rq(struct spu_context *ctx)
list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]);
set_bit(ctx->prio, spu_prio->bitmap);
if (!spu_prio->nr_waiting++)
- __mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
+ mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
}
}
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 69c0ce321b4..cb9daa6ac02 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -2715,7 +2715,7 @@ static void ipath_hol_signal_up(struct ipath_devdata *dd)
* to prevent HoL blocking, then start the HoL timer that
* periodically continues, then stop procs, so they can detect
* link down if they want, and do something about it.
- * Timer may already be running, so use __mod_timer, not add_timer.
+ * Timer may already be running, so use mod_timer, not add_timer.
*/
void ipath_hol_down(struct ipath_devdata *dd)
{
@@ -2724,7 +2724,7 @@ void ipath_hol_down(struct ipath_devdata *dd)
dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
dd->ipath_hol_timer.expires = jiffies +
msecs_to_jiffies(ipath_hol_timeout_ms);
- __mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
+ mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
}
/*
@@ -2763,7 +2763,7 @@ void ipath_hol_event(unsigned long opaque)
else {
dd->ipath_hol_timer.expires = jiffies +
msecs_to_jiffies(ipath_hol_timeout_ms);
- __mod_timer(&dd->ipath_hol_timer,
+ mod_timer(&dd->ipath_hol_timer,
dd->ipath_hol_timer.expires);
}
}
diff --git a/include/linux/timer.h b/include/linux/timer.h
index daf9685b861..e2d662e3416 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -86,8 +86,8 @@ static inline int timer_pending(const struct timer_list * timer)
extern void add_timer_on(struct timer_list *timer, int cpu);
extern int del_timer(struct timer_list * timer);
-extern int __mod_timer(struct timer_list *timer, unsigned long expires);
extern int mod_timer(struct timer_list *timer, unsigned long expires);
+extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);
/*
* The jiffies value which is added to now, when there is no timer
@@ -146,25 +146,7 @@ static inline void timer_stats_timer_clear_start_info(struct timer_list *timer)
}
#endif
-/**
- * add_timer - start a timer
- * @timer: the timer to be added
- *
- * The kernel will do a ->function(->data) callback from the
- * timer interrupt at the ->expires point in the future. The
- * current time is 'jiffies'.
- *
- * The timer's ->expires, ->function (and if the handler uses it, ->data)
- * fields must be set prior calling this function.
- *
- * Timers with an ->expires field in the past will be executed in the next
- * timer tick.
- */
-static inline void add_timer(struct timer_list *timer)
-{
- BUG_ON(timer_pending(timer));
- __mod_timer(timer, timer->expires);
-}
+extern void add_timer(struct timer_list *timer);
#ifdef CONFIG_SMP
extern int try_to_del_timer_sync(struct timer_list *timer);
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 998a55d80ac..aa3475fcff6 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -190,7 +190,7 @@ struct timex {
* offset and maximum frequency tolerance.
*/
#define SHIFT_USEC 16 /* frequency offset scale (shift) */
-#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
+#define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
#define PPM_SCALE_INV_SHIFT 19
#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
PPM_SCALE + 1)
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index e976e505648..8e5d9a68b02 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1370,7 +1370,8 @@ static inline int fastpath_timer_check(struct task_struct *tsk)
if (task_cputime_expired(&group_sample, &sig->cputime_expires))
return 1;
}
- return 0;
+
+ return sig->rlim[RLIMIT_CPU].rlim_cur != RLIM_INFINITY;
}
/*
diff --git a/kernel/relay.c b/kernel/relay.c
index 9d79b7854fa..8f2179c8056 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -750,7 +750,7 @@ size_t relay_switch_subbuf(struct rchan_buf *buf, size_t length)
* from the scheduler (trying to re-grab
* rq->lock), so defer it.
*/
- __mod_timer(&buf->timer, jiffies + 1);
+ mod_timer(&buf->timer, jiffies + 1);
}
old = buf->data;
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index f5f793d9241..7fc64375ff4 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -1,71 +1,129 @@
/*
- * linux/kernel/time/ntp.c
- *
* NTP state machine interfaces and logic.
*
* This code was mainly moved from kernel/timer.c and kernel/time.c
* Please see those files for relevant copyright info and historical
* changelogs.
*/
-
-#include <linux/mm.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/jiffies.h>
-#include <linux/hrtimer.h>
#include <linux/capability.h>
-#include <linux/math64.h>
#include <linux/clocksource.h>
#include <linux/workqueue.h>
-#include <asm/timex.h>
+#include <linux/hrtimer.h>
+#include <linux/jiffies.h>
+#include <linux/math64.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/mm.h>
/*
- * Timekeeping variables
+ * NTP timekeeping variables:
*/
-unsigned long tick_usec = TICK_USEC; /* USER_HZ period (usec) */
-unsigned long tick_nsec; /* ACTHZ period (nsec) */
-u64 tick_length;
-static u64 tick_length_base;
-static struct hrtimer leap_timer;
+/* USER_HZ period (usecs): */
+unsigned long tick_usec = TICK_USEC;
-#define MAX_TICKADJ 500 /* microsecs */
-#define MAX_TICKADJ_SCALED (((u64)(MAX_TICKADJ * NSEC_PER_USEC) << \
- NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ)
+/* ACTHZ period (nsecs): */
+unsigned long tick_nsec;
+
+u64 tick_length;
+static u64 tick_length_base;
+
+static struct hrtimer leap_timer;
+
+#define MAX_TICKADJ 500LL /* usecs */
+#define MAX_TICKADJ_SCALED \
+ (((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ)
/*
* phase-lock loop variables
*/
-/* TIME_ERROR prevents overwriting the CMOS clock */
-static int time_state = TIME_OK; /* clock synchronization status */
-int time_status = STA_UNSYNC; /* clock status bits */
-static long time_tai; /* TAI offset (s) */
-static s64 time_offset; /* time adjustment (ns) */
-static long time_constant = 2; /* pll time constant */
-long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */
-long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
-static s64 time_freq; /* frequency offset (scaled ns/s)*/
-static long time_reftime; /* time at last adjustment (s) */
-long time_adjust;
-static long ntp_tick_adj;
+/*
+ * clock synchronization status
+ *
+ * (TIME_ERROR prevents overwriting the CMOS clock)
+ */
+static int time_state = TIME_OK;
+
+/* clock status bits: */
+int time_status = STA_UNSYNC;
+
+/* TAI offset (secs): */
+static long time_tai;
+
+/* time adjustment (nsecs): */
+static s64 time_offset;
+
+/* pll time constant: */
+static long time_constant = 2;
+
+/* maximum error (usecs): */
+long time_maxerror = NTP_PHASE_LIMIT;
+
+/* estimated error (usecs): */
+long time_esterror = NTP_PHASE_LIMIT;
+
+/* frequency offset (scaled nsecs/secs): */
+static s64 time_freq;
+
+/* time at last adjustment (secs): */
+static long time_reftime;
+
+long time_adjust;
+
+/* constant (boot-param configurable) NTP tick adjustment (upscaled) */
+static s64 ntp_tick_adj;
+
+/*
+ * NTP methods:
+ */
+
+/*
+ * Update (tick_length, tick_length_base, tick_nsec), based
+ * on (tick_usec, ntp_tick_adj, time_freq):
+ */
static void ntp_update_frequency(void)
{
- u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
- << NTP_SCALE_SHIFT;
- second_length += (s64)ntp_tick_adj << NTP_SCALE_SHIFT;
- second_length += time_freq;
+ u64 second_length;
+ u64 new_base;
+
+ second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
+ << NTP_SCALE_SHIFT;
+
+ second_length += ntp_tick_adj;
+ second_length += time_freq;
- tick_length_base = second_length;
+ tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT;
+ new_base = div_u64(second_length, NTP_INTERVAL_FREQ);
- tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT;
- tick_length_base = div_u64(tick_length_base, NTP_INTERVAL_FREQ);
+ /*
+ * Don't wait for the next second_overflow, apply
+ * the change to the tick length immediately:
+ */
+ tick_length += new_base - tick_length_base;
+ tick_length_base = new_base;
+}
+
+static inline s64 ntp_update_offset_fll(s64 offset64, long secs)
+{
+ time_status &= ~STA_MODE;
+
+ if (secs < MINSEC)
+ return 0;
+
+ if (!(time_status & STA_FLL) && (secs <= MAXSEC))
+ return 0;
+
+ time_status |= STA_MODE;
+
+ return div_s64(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);
}
static void ntp_update_offset(long offset)
{
- long mtemp;
s64 freq_adj;
+ s64 offset64;
+ long secs;
if (!(time_status & STA_PLL))
return;
@@ -84,24 +142,23 @@ static void ntp_update_offset(long offset)
* Select how the frequency is to be controlled
* and in which mode (PLL or FLL).
*/
- if (time_status & STA_FREQHOLD || time_reftime == 0)
- time_reftime = xtime.tv_sec;
- mtemp = xtime.tv_sec - time_reftime;
+ secs = xtime.tv_sec - time_reftime;
+ if (unlikely(time_status & STA_FREQHOLD))
+ secs = 0;
+
time_reftime = xtime.tv_sec;
- freq_adj = (s64)offset * mtemp;
- freq_adj <<= NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant);
- time_status &= ~STA_MODE;
- if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
- freq_adj += div_s64((s64)offset << (NTP_SCALE_SHIFT - SHIFT_FLL),
- mtemp);
- time_status |= STA_MODE;
- }
- freq_adj += time_freq;
- freq_adj = min(freq_adj, MAXFREQ_SCALED);
- time_freq = max(freq_adj, -MAXFREQ_SCALED);
+ offset64 = offset;
+ freq_adj = (offset64 * secs) <<
+ (NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant));
- time_offset = div_s64((s64)offset << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);
+ freq_adj += ntp_update_offset_fll(offset64, secs);
+
+ freq_adj = min(freq_adj + time_freq, MAXFREQ_SCALED);
+
+ time_freq = max(freq_adj, -MAXFREQ_SCALED);
+
+ time_offset = div_s64(offset64 << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);
}
/**
@@ -111,15 +168,15 @@ static void ntp_update_offset(long offset)
*/
void ntp_clear(void)
{
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
ntp_update_frequency();
- tick_length = tick_length_base;
- time_offset = 0;
+ tick_length = tick_length_base;
+ time_offset = 0;
}
/*
@@ -140,8 +197,8 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
xtime.tv_sec--;
wall_to_monotonic.tv_sec++;
time_state = TIME_OOP;
- printk(KERN_NOTICE "Clock: "
- "inserting leap second 23:59:60 UTC\n");
+ printk(KERN_NOTICE
+ "Clock: inserting leap second 23:59:60 UTC\n");
hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC);
res = HRTIMER_RESTART;
break;
@@ -150,8 +207,8 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
time_tai--;
wall_to_monotonic.tv_sec--;
time_state = TIME_WAIT;
- printk(KERN_NOTICE "Clock: "
- "deleting leap second 23:59:59 UTC\n");
+ printk(KERN_NOTICE
+ "Clock: deleting leap second 23:59:59 UTC\n");
break;
case TIME_OOP:
time_tai++;
@@ -179,7 +236,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
*/
void second_overflow(void)
{
- s64 time_adj;
+ s64 delta;
/* Bump the maxerror field */
time_maxerror += MAXFREQ / NSEC_PER_USEC;
@@ -192,24 +249,30 @@ void second_overflow(void)
* Compute the phase adjustment for the next second. The offset is
* reduced by a fixed factor times the time constant.
*/
- tick_length = tick_length_base;
- time_adj = shift_right(time_offset, SHIFT_PLL + time_constant);
- time_offset -= time_adj;
- tick_length += time_adj;
-
- if (unlikely(time_adjust)) {
- if (time_adjust > MAX_TICKADJ) {
- time_adjust -= MAX_TICKADJ;
- tick_length += MAX_TICKADJ_SCALED;
- } else if (time_adjust < -MAX_TICKADJ) {
- time_adjust += MAX_TICKADJ;
- tick_length -= MAX_TICKADJ_SCALED;
- } else {
- tick_length += (s64)(time_adjust * NSEC_PER_USEC /
- NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT;
- time_adjust = 0;
- }
+ tick_length = tick_length_base;
+
+ delta = shift_right(time_offset, SHIFT_PLL + time_constant);
+ time_offset -= delta;
+ tick_length += delta;
+
+ if (!time_adjust)
+ return;
+
+ if (time_adjust > MAX_TICKADJ) {
+ time_adjust -= MAX_TICKADJ;
+ tick_length += MAX_TICKADJ_SCALED;
+ return;
}
+
+ if (time_adjust < -MAX_TICKADJ) {
+ time_adjust += MAX_TICKADJ;
+ tick_length -= MAX_TICKADJ_SCALED;
+ return;
+ }
+
+ tick_length += (s64)(time_adjust * NSEC_PER_USEC / NTP_INTERVAL_FREQ)
+ << NTP_SCALE_SHIFT;
+ time_adjust = 0;
}
#ifdef CONFIG_GENERIC_CMOS_UPDATE
@@ -233,12 +296,13 @@ static void sync_cmos_clock(struct work_struct *work)
* This code is run on a timer. If the clock is set, that timer
* may not expire at the correct time. Thus, we adjust...
*/
- if (!ntp_synced())
+ if (!ntp_synced()) {
/*
* Not synced, exit, do not restart a timer (if one is
* running, let it run out).
*/
return;
+ }
getnstimeofday(&now);
if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
@@ -270,7 +334,116 @@ static void notify_cmos_timer(void)
static inline void notify_cmos_timer(void) { }
#endif
-/* adjtimex mainly allows reading (and writing, if superuser) of
+/*
+ * Start the leap seconds timer:
+ */
+static inline void ntp_start_leap_timer(struct timespec *ts)
+{
+ long now = ts->tv_sec;
+
+ if (time_status & STA_INS) {
+ time_state = TIME_INS;
+ now += 86400 - now % 86400;
+ hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS);
+
+ return;
+ }
+
+ if (time_status & STA_DEL) {
+ time_state = TIME_DEL;
+ now += 86400 - (now + 1) % 86400;
+ hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS);
+ }
+}
+
+/*
+ * Propagate a new txc->status value into the NTP state:
+ */
+static inline void process_adj_status(struct timex *txc, struct timespec *ts)
+{
+ if ((time_status & STA_PLL) && !(txc->status & STA_PLL)) {
+ time_state = TIME_OK;
+ time_status = STA_UNSYNC;
+ }
+
+ /*
+ * If we turn on PLL adjustments then reset the
+ * reference time to current time.
+ */
+ if (!(time_status & STA_PLL) && (txc->status & STA_PLL))
+ time_reftime = xtime.tv_sec;
+
+ /* only set allowed bits */
+ time_status &= STA_RONLY;
+ time_status |= txc->status & ~STA_RONLY;
+
+ switch (time_state) {
+ case TIME_OK:
+ ntp_start_leap_timer(ts);
+ break;
+ case TIME_INS:
+ case TIME_DEL:
+ time_state = TIME_OK;
+ ntp_start_leap_timer(ts);
+ case TIME_WAIT:
+ if (!(time_status & (STA_INS | STA_DEL)))
+ time_state = TIME_OK;
+ break;
+ case TIME_OOP:
+ hrtimer_restart(&leap_timer);
+ break;
+ }
+}
+/*
+ * Called with the xtime lock held, so we can access and modify
+ * all the global NTP state:
+ */
+static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts)
+{
+ if (txc->modes & ADJ_STATUS)
+ process_adj_status(txc, ts);
+
+ if (txc->modes & ADJ_NANO)
+ time_status |= STA_NANO;
+
+ if (txc->modes & ADJ_MICRO)
+ time_status &= ~STA_NANO;
+
+ if (txc->modes & ADJ_FREQUENCY) {
+ time_freq = txc->freq * PPM_SCALE;
+ time_freq = min(time_freq, MAXFREQ_SCALED);
+ time_freq = max(time_freq, -MAXFREQ_SCALED);
+ }
+
+ if (txc->modes & ADJ_MAXERROR)
+ time_maxerror = txc->maxerror;
+
+ if (txc->modes & ADJ_ESTERROR)
+ time_esterror = txc->esterror;
+
+ if (txc->modes & ADJ_TIMECONST) {
+ time_constant = txc->constant;
+ if (!(time_status & STA_NANO))
+ time_constant += 4;
+ time_constant = min(time_constant, (long)MAXTC);
+ time_constant = max(time_constant, 0l);
+ }
+
+ if (txc->modes & ADJ_TAI && txc->constant > 0)
+ time_tai = txc->constant;
+
+ if (txc->modes & ADJ_OFFSET)
+ ntp_update_offset(txc->offset);
+
+ if (txc->modes & ADJ_TICK)
+ tick_usec = txc->tick;
+
+ if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
+ ntp_update_frequency();
+}
+
+/*
+ * adjtimex mainly allows reading (and writing, if superuser) of
* kernel time-keeping variables. used by xntpd.
*/
int do_adjtimex(struct timex *txc)
@@ -291,11 +464,14 @@ int do_adjtimex(struct timex *txc)
if (txc->modes && !capable(CAP_SYS_TIME))
return -EPERM;
- /* if the quartz is off by more than 10% something is VERY wrong! */
+ /*
+ * if the quartz is off by more than 10% then
+ * something is VERY wrong!
+ */
if (txc->modes & ADJ_TICK &&
(txc->tick < 900000/USER_HZ ||
txc->tick > 1100000/USER_HZ))
- return -EINVAL;
+ return -EINVAL;
if (txc->modes & ADJ_STATUS && time_state != TIME_OK)
hrtimer_cancel(&leap_timer);
@@ -305,7 +481,6 @@ int do_adjtimex(struct timex *txc)
write_seqlock_irq(&xtime_lock);
- /* If there are input parameters, then process them */
if (txc->modes & ADJ_ADJTIME) {
long save_adjust = time_adjust;
@@ -315,98 +490,24 @@ int do_adjtimex(struct timex *txc)
ntp_update_frequency();
}
txc->offset = save_adjust;
- goto adj_done;
- }
- if (txc->modes) {
- long sec;
-
- if (txc->modes & ADJ_STATUS) {
- if ((time_status & STA_PLL) &&
- !(txc->status & STA_PLL)) {
- time_state = TIME_OK;
- time_status = STA_UNSYNC;
- }
- /* only set allowed bits */
- time_status &= STA_RONLY;
- time_status |= txc->status & ~STA_RONLY;
-
- switch (time_state) {
- case TIME_OK:
- start_timer:
- sec = ts.tv_sec;
- if (time_status & STA_INS) {
- time_state = TIME_INS;
- sec += 86400 - sec % 86400;
- hrtimer_start(&leap_timer, ktime_set(sec, 0), HRTIMER_MODE_ABS);
- } else if (time_status & STA_DEL) {
- time_state = TIME_DEL;
- sec += 86400 - (sec + 1) % 86400;
- hrtimer_start(&leap_timer, ktime_set(sec, 0), HRTIMER_MODE_ABS);
- }
- break;
- case TIME_INS:
- case TIME_DEL:
- time_state = TIME_OK;
- goto start_timer;
- break;
- case TIME_WAIT:
- if (!(time_status & (STA_INS | STA_DEL)))
- time_state = TIME_OK;
- break;
- case TIME_OOP:
- hrtimer_restart(&leap_timer);
- break;
- }
- }
-
- if (txc->modes & ADJ_NANO)
- time_status |= STA_NANO;
- if (txc->modes & ADJ_MICRO)
- time_status &= ~STA_NANO;
-
- if (txc->modes & ADJ_FREQUENCY) {
- time_freq = (s64)txc->freq * PPM_SCALE;
- time_freq = min(time_freq, MAXFREQ_SCALED);
- time_freq = max(time_freq, -MAXFREQ_SCALED);
- }
-
- if (txc->modes & ADJ_MAXERROR)
- time_maxerror = txc->maxerror;
- if (txc->modes & ADJ_ESTERROR)
- time_esterror = txc->esterror;
-
- if (txc->modes & ADJ_TIMECONST) {
- time_constant = txc->constant;
- if (!(time_status & STA_NANO))
- time_constant += 4;
- time_constant = min(time_constant, (long)MAXTC);
- time_constant = max(time_constant, 0l);
- }
-
- if (txc->modes & ADJ_TAI && txc->constant > 0)
- time_tai = txc->constant;
-
- if (txc->modes & ADJ_OFFSET)
- ntp_update_offset(txc->offset);
- if (txc->modes & ADJ_TICK)
- tick_usec = txc->tick;
+ } else {
- if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
- ntp_update_frequency();
- }
+ /* If there are input parameters, then process them: */
+ if (txc->modes)
+ process_adjtimex_modes(txc, &ts);
- txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
+ txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
NTP_SCALE_SHIFT);
- if (!(time_status & STA_NANO))
- txc->offset /= NSEC_PER_USEC;
+ if (!(time_status & STA_NANO))
+ txc->offset /= NSEC_PER_USEC;
+ }
-adj_done:
result = time_state; /* mostly `TIME_OK' */
if (time_status & (STA_UNSYNC|STA_CLOCKERR))
result = TIME_ERROR;
txc->freq = shift_right((time_freq >> PPM_SCALE_INV_SHIFT) *
- (s64)PPM_SCALE_INV, NTP_SCALE_SHIFT);
+ PPM_SCALE_INV, NTP_SCALE_SHIFT);
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
@@ -425,6 +526,7 @@ adj_done:
txc->calcnt = 0;
txc->errcnt = 0;
txc->stbcnt = 0;
+
write_sequnlock_irq(&xtime_lock);
txc->time.tv_sec = ts.tv_sec;
@@ -440,6 +542,8 @@ adj_done:
static int __init ntp_tick_adj_setup(char *str)
{
ntp_tick_adj = simple_strtol(str, NULL, 0);
+ ntp_tick_adj <<= NTP_SCALE_SHIFT;
+
return 1;
}
diff --git a/kernel/timer.c b/kernel/timer.c
index 13dd64fe143..9b77fc9a9ac 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -589,11 +589,14 @@ static struct tvec_base *lock_timer_base(struct timer_list *timer,
}
}
-int __mod_timer(struct timer_list *timer, unsigned long expires)
+static inline int
+__mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
{
struct tvec_base *base, *new_base;
unsigned long flags;
- int ret = 0;
+ int ret;
+
+ ret = 0;
timer_stats_timer_set_start_info(timer);
BUG_ON(!timer->function);
@@ -603,6 +606,9 @@ int __mod_timer(struct timer_list *timer, unsigned long expires)
if (timer_pending(timer)) {
detach_timer(timer, 0);
ret = 1;
+ } else {
+ if (pending_only)
+ goto out_unlock;
}
debug_timer_activate(timer);
@@ -629,42 +635,28 @@ int __mod_timer(struct timer_list *timer, unsigned long expires)
timer->expires = expires;
internal_add_timer(base, timer);
+
+out_unlock:
spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
-EXPORT_SYMBOL(__mod_timer);
-
/**
- * add_timer_on - start a timer on a particular CPU
- * @timer: the timer to be added
- * @cpu: the CPU to start it on
+ * mod_timer_pending - modify a pending timer's timeout
+ * @timer: the pending timer to be modified
+ * @expires: new timeout in jiffies
*
- * This is not very scalable on SMP. Double adds are not possible.
+ * mod_timer_pending() is the same for pending timers as mod_timer(),
+ * but will not re-activate and modify already deleted timers.
+ *
+ * It is useful for unserialized use of timers.
*/
-void add_timer_on(struct timer_list *timer, int cpu)
+int mod_timer_pending(struct timer_list *timer, unsigned long expires)
{
- struct tvec_base *base = per_cpu(tvec_bases, cpu);
- unsigned long flags;
-
- timer_stats_timer_set_start_info(timer);
- BUG_ON(timer_pending(timer) || !timer->function);
- spin_lock_irqsave(&base->lock, flags);
- timer_set_base(timer, base);
- debug_timer_activate(timer);
- internal_add_timer(base, timer);
- /*
- * Check whether the other CPU is idle and needs to be
- * triggered to reevaluate the timer wheel when nohz is
- * active. We are protected against the other CPU fiddling
- * with the timer by holding the timer base lock. This also
- * makes sure that a CPU on the way to idle can not evaluate
- * the timer wheel.
- */
- wake_up_idle_cpu(cpu);
- spin_unlock_irqrestore(&base->lock, flags);
+ return __mod_timer(timer, expires, true);
}
+EXPORT_SYMBOL(mod_timer_pending);
/**
* mod_timer - modify a timer's timeout
@@ -688,9 +680,6 @@ void add_timer_on(struct timer_list *timer, int cpu)
*/
int mod_timer(struct timer_list *timer, unsigned long expires)
{
- BUG_ON(!timer->function);
-
- timer_stats_timer_set_start_info(timer);
/*
* This is a common optimization triggered by the
* networking code - if the timer is re-modified
@@ -699,12 +688,62 @@ int mod_timer(struct timer_list *timer, unsigned long expires)
if (timer->expires == expires && timer_pending(timer))
return 1;
- return __mod_timer(timer, expires);
+ return __mod_timer(timer, expires, false);
}
-
EXPORT_SYMBOL(mod_timer);
/**
+ * add_timer - start a timer
+ * @timer: the timer to be added
+ *
+ * The kernel will do a ->function(->data) callback from the
+ * timer interrupt at the ->expires point in the future. The
+ * current time is 'jiffies'.
+ *
+ * The timer's ->expires, ->function (and if the handler uses it, ->data)
+ * fields must be set prior calling this function.
+ *
+ * Timers with an ->expires field in the past will be executed in the next
+ * timer tick.
+ */
+void add_timer(struct timer_list *timer)
+{
+ BUG_ON(timer_pending(timer));
+ mod_timer(timer, timer->expires);
+}
+EXPORT_SYMBOL(add_timer);
+
+/**
+ * add_timer_on - start a timer on a particular CPU
+ * @timer: the timer to be added
+ * @cpu: the CPU to start it on
+ *
+ * This is not very scalable on SMP. Double adds are not possible.
+ */
+void add_timer_on(struct timer_list *timer, int cpu)
+{
+ struct tvec_base *base = per_cpu(tvec_bases, cpu);
+ unsigned long flags;
+
+ timer_stats_timer_set_start_info(timer);
+ BUG_ON(timer_pending(timer) || !timer->function);
+ spin_lock_irqsave(&base->lock, flags);
+ timer_set_base(timer, base);
+ debug_timer_activate(timer);
+ internal_add_timer(base, timer);
+ /*
+ * Check whether the other CPU is idle and needs to be
+ * triggered to reevaluate the timer wheel when nohz is
+ * active. We are protected against the other CPU fiddling
+ * with the timer by holding the timer base lock. This also
+ * makes sure that a CPU on the way to idle can not evaluate
+ * the timer wheel.
+ */
+ wake_up_idle_cpu(cpu);
+ spin_unlock_irqrestore(&base->lock, flags);
+}
+
+/**
* del_timer - deactive a timer.
* @timer: the timer to be deactivated
*
@@ -733,7 +772,6 @@ int del_timer(struct timer_list *timer)
return ret;
}
-
EXPORT_SYMBOL(del_timer);
#ifdef CONFIG_SMP
@@ -767,7 +805,6 @@ out:
return ret;
}
-
EXPORT_SYMBOL(try_to_del_timer_sync);
/**
@@ -796,7 +833,6 @@ int del_timer_sync(struct timer_list *timer)
cpu_relax();
}
}
-
EXPORT_SYMBOL(del_timer_sync);
#endif
@@ -1268,7 +1304,7 @@ signed long __sched schedule_timeout(signed long timeout)
expire = timeout + jiffies;
setup_timer_on_stack(&timer, process_timeout, (unsigned long)current);
- __mod_timer(&timer, expire);
+ __mod_timer(&timer, expire, false);
schedule();
del_singleshot_timer_sync(&timer);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 12:48:01 +0000