aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/sound/alsa/soc/dapm.txt12
-rw-r--r--MAINTAINERS14
-rw-r--r--arch/arm/Kconfig74
-rw-r--r--arch/arm/Makefile3
-rw-r--r--arch/arm/boot/compressed/Makefile2
-rw-r--r--arch/arm/boot/compressed/head.S3
-rw-r--r--arch/arm/common/Kconfig3
-rw-r--r--arch/arm/common/dmabounce.c287
-rw-r--r--arch/arm/common/gic.c2
-rw-r--r--arch/arm/common/it8152.c14
-rw-r--r--arch/arm/common/locomo.c28
-rw-r--r--arch/arm/common/sa1111.c2
-rw-r--r--arch/arm/common/scoop.c2
-rw-r--r--arch/arm/common/sharpsl_param.c2
-rw-r--r--arch/arm/common/time-acorn.c2
-rw-r--r--arch/arm/common/uengine.c2
-rw-r--r--arch/arm/common/via82c505.c2
-rw-r--r--arch/arm/common/vic.c2
-rw-r--r--arch/arm/configs/afeb9260_defconfig1259
-rw-r--r--arch/arm/configs/at91sam9rlek_defconfig1
-rw-r--r--arch/arm/configs/cm_x300_defconfig1466
-rw-r--r--arch/arm/configs/jornada720_defconfig1057
-rw-r--r--arch/arm/configs/omap3_beagle_defconfig1321
-rw-r--r--arch/arm/configs/omap_ldp_defconfig1044
-rw-r--r--arch/arm/configs/orion5x_defconfig3
-rw-r--r--arch/arm/configs/overo_defconfig1885
-rw-r--r--arch/arm/configs/palmz72_defconfig951
-rw-r--r--arch/arm/configs/viper_defconfig1678
-rw-r--r--arch/arm/configs/xm_x2xx_defconfig (renamed from arch/arm/configs/xm_x270_defconfig)237
-rw-r--r--arch/arm/include/asm/bug.h2
-rw-r--r--arch/arm/include/asm/cacheflush.h90
-rw-r--r--arch/arm/include/asm/cachetype.h52
-rw-r--r--arch/arm/include/asm/cputype.h64
-rw-r--r--arch/arm/include/asm/dma-mapping.h378
-rw-r--r--arch/arm/include/asm/elf.h72
-rw-r--r--arch/arm/include/asm/futex.h124
-rw-r--r--arch/arm/include/asm/io.h5
-rw-r--r--arch/arm/include/asm/irq.h4
-rw-r--r--arch/arm/include/asm/kprobes.h1
-rw-r--r--arch/arm/include/asm/mach/map.h17
-rw-r--r--arch/arm/include/asm/mach/udc_pxa2xx.h3
-rw-r--r--arch/arm/include/asm/mc146818rtc.h2
-rw-r--r--arch/arm/include/asm/memory.h40
-rw-r--r--arch/arm/include/asm/mmu_context.h1
-rw-r--r--arch/arm/include/asm/page.h5
-rw-r--r--arch/arm/include/asm/pgtable.h88
-rw-r--r--arch/arm/include/asm/ptrace.h7
-rw-r--r--arch/arm/include/asm/setup.h11
-rw-r--r--arch/arm/include/asm/sparsemem.h20
-rw-r--r--arch/arm/include/asm/system.h58
-rw-r--r--arch/arm/include/asm/thread_info.h2
-rw-r--r--arch/arm/include/asm/uaccess.h10
-rw-r--r--arch/arm/include/asm/vga.h2
-rw-r--r--arch/arm/kernel/Makefile2
-rw-r--r--arch/arm/kernel/armksyms.c4
-rw-r--r--arch/arm/kernel/bios32.c2
-rw-r--r--arch/arm/kernel/crunch.c2
-rw-r--r--arch/arm/kernel/debug.S5
-rw-r--r--arch/arm/kernel/dma-isa.c3
-rw-r--r--arch/arm/kernel/ecard.c6
-rw-r--r--arch/arm/kernel/elf.c79
-rw-r--r--arch/arm/kernel/entry-armv.S16
-rw-r--r--arch/arm/kernel/entry-common.S25
-rw-r--r--arch/arm/kernel/fiq.c1
-rw-r--r--arch/arm/kernel/head-common.S19
-rw-r--r--arch/arm/kernel/head-nommu.S4
-rw-r--r--arch/arm/kernel/head.S12
-rw-r--r--arch/arm/kernel/init_task.c2
-rw-r--r--arch/arm/kernel/io.c3
-rw-r--r--arch/arm/kernel/irq.c11
-rw-r--r--arch/arm/kernel/kprobes-decode.c4
-rw-r--r--arch/arm/kernel/kprobes.c5
-rw-r--r--arch/arm/kernel/machine_kexec.c2
-rw-r--r--arch/arm/kernel/module.c2
-rw-r--r--arch/arm/kernel/process.c33
-rw-r--r--arch/arm/kernel/ptrace.c10
-rw-r--r--arch/arm/kernel/setup.c279
-rw-r--r--arch/arm/kernel/signal.c2
-rw-r--r--arch/arm/kernel/sys_arm.c3
-rw-r--r--arch/arm/kernel/sys_oabi-compat.c2
-rw-r--r--arch/arm/kernel/time.c2
-rw-r--r--arch/arm/kernel/traps.c18
-rw-r--r--arch/arm/kernel/xscale-cp0.c2
-rw-r--r--arch/arm/lib/ashldi3.S2
-rw-r--r--arch/arm/lib/ashrdi3.S2
-rw-r--r--arch/arm/lib/backtrace.S4
-rw-r--r--arch/arm/lib/changebit.S2
-rw-r--r--arch/arm/lib/clear_user.S3
-rw-r--r--arch/arm/lib/clearbit.S2
-rw-r--r--arch/arm/lib/copy_from_user.S2
-rw-r--r--arch/arm/lib/copy_page.S1
-rw-r--r--arch/arm/lib/copy_to_user.S2
-rw-r--r--arch/arm/lib/csumipv6.S1
-rw-r--r--arch/arm/lib/csumpartial.S1
-rw-r--r--arch/arm/lib/csumpartialcopy.S7
-rw-r--r--arch/arm/lib/csumpartialcopygeneric.S1
-rw-r--r--arch/arm/lib/csumpartialcopyuser.S7
-rw-r--r--arch/arm/lib/delay.S3
-rw-r--r--arch/arm/lib/div64.S1
-rw-r--r--arch/arm/lib/findbit.S8
-rw-r--r--arch/arm/lib/getuser.S14
-rw-r--r--arch/arm/lib/io-readsb.S1
-rw-r--r--arch/arm/lib/io-readsl.S1
-rw-r--r--arch/arm/lib/io-readsw-armv4.S1
-rw-r--r--arch/arm/lib/io-writesb.S1
-rw-r--r--arch/arm/lib/io-writesl.S1
-rw-r--r--arch/arm/lib/io-writesw-armv4.S1
-rw-r--r--arch/arm/lib/lib1funcs.S11
-rw-r--r--arch/arm/lib/lshrdi3.S2
-rw-r--r--arch/arm/lib/memchr.S1
-rw-r--r--arch/arm/lib/memcpy.S1
-rw-r--r--arch/arm/lib/memmove.S1
-rw-r--r--arch/arm/lib/memset.S1
-rw-r--r--arch/arm/lib/memzero.S1
-rw-r--r--arch/arm/lib/muldi3.S2
-rw-r--r--arch/arm/lib/putuser.S18
-rw-r--r--arch/arm/lib/setbit.S2
-rw-r--r--arch/arm/lib/sha1.S3
-rw-r--r--arch/arm/lib/strchr.S1
-rw-r--r--arch/arm/lib/strncpy_from_user.S1
-rw-r--r--arch/arm/lib/strnlen_user.S1
-rw-r--r--arch/arm/lib/strrchr.S1
-rw-r--r--arch/arm/lib/testchangebit.S2
-rw-r--r--arch/arm/lib/testclearbit.S2
-rw-r--r--arch/arm/lib/testsetbit.S2
-rw-r--r--arch/arm/lib/uaccess.S2
-rw-r--r--arch/arm/lib/ucmpdi2.S4
-rw-r--r--arch/arm/mach-at91/Kconfig22
-rw-r--r--arch/arm/mach-at91/Makefile2
-rw-r--r--arch/arm/mach-at91/at91cap9.c6
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c54
-rw-r--r--arch/arm/mach-at91/at91sam9263.c6
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c53
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c6
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c98
-rw-r--r--arch/arm/mach-at91/at91x40_time.c2
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c210
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c2
-rw-r--r--arch/arm/mach-at91/board-carmeva.c28
-rw-r--r--arch/arm/mach-at91/board-csb337.c12
-rw-r--r--arch/arm/mach-at91/board-csb637.c4
-rw-r--r--arch/arm/mach-at91/board-dk.c4
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c2
-rw-r--r--arch/arm/mach-at91/board-ek.c4
-rw-r--r--arch/arm/mach-at91/board-picotux200.c2
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c14
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c4
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c80
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c18
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c64
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c8
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c8
-rw-r--r--arch/arm/mach-at91/board-usb-a9260.c14
-rw-r--r--arch/arm/mach-at91/board-usb-a9263.c14
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c50
-rw-r--r--arch/arm/mach-at91/clock.c3
-rw-r--r--arch/arm/mach-at91/gpio.c5
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pit.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91_rstc.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91_rtt.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91_shdwc.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91_wdt.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260_matrix.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261_matrix.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_sdramc.h3
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_smc.h3
-rw-r--r--arch/arm/mach-at91/include/mach/board.h14
-rw-r--r--arch/arm/mach-at91/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-at91/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-at91/leds.c45
-rw-r--r--arch/arm/mach-at91/pm.c2
-rw-r--r--arch/arm/mach-at91/pm_slowclock.S283
-rw-r--r--arch/arm/mach-clps711x/autcpu12.c2
-rw-r--r--arch/arm/mach-clps711x/cdb89712.c2
-rw-r--r--arch/arm/mach-clps711x/include/mach/system.h2
-rw-r--r--arch/arm/mach-clps711x/irq.c2
-rw-r--r--arch/arm/mach-clps711x/p720t-leds.c2
-rw-r--r--arch/arm/mach-clps711x/p720t.c2
-rw-r--r--arch/arm/mach-clps711x/time.c2
-rw-r--r--arch/arm/mach-clps7500/core.c2
-rw-r--r--arch/arm/mach-clps7500/include/mach/irq.h2
-rw-r--r--arch/arm/mach-clps7500/include/mach/memory.h8
-rw-r--r--arch/arm/mach-clps7500/include/mach/system.h2
-rw-r--r--arch/arm/mach-davinci/Makefile2
-rw-r--r--arch/arm/mach-davinci/board-evm.c341
-rw-r--r--arch/arm/mach-davinci/clock.c2
-rw-r--r--arch/arm/mach-davinci/devices.c48
-rw-r--r--arch/arm/mach-davinci/gpio.c138
-rw-r--r--arch/arm/mach-davinci/id.c3
-rw-r--r--arch/arm/mach-davinci/include/mach/common.h3
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h73
-rw-r--r--arch/arm/mach-davinci/include/mach/i2c.h7
-rw-r--r--arch/arm/mach-davinci/include/mach/io.h43
-rw-r--r--arch/arm/mach-davinci/include/mach/system.h2
-rw-r--r--arch/arm/mach-davinci/io.c2
-rw-r--r--arch/arm/mach-davinci/irq.c2
-rw-r--r--arch/arm/mach-davinci/psc.c2
-rw-r--r--arch/arm/mach-davinci/serial.c2
-rw-r--r--arch/arm/mach-davinci/time.c2
-rw-r--r--arch/arm/mach-davinci/usb.c116
-rw-r--r--arch/arm/mach-ebsa110/core.c2
-rw-r--r--arch/arm/mach-ebsa110/io.c2
-rw-r--r--arch/arm/mach-ep93xx/Kconfig14
-rw-r--r--arch/arm/mach-ep93xx/adssphere.c28
-rw-r--r--arch/arm/mach-ep93xx/clock.c2
-rw-r--r--arch/arm/mach-ep93xx/core.c46
-rw-r--r--arch/arm/mach-ep93xx/edb9302.c8
-rw-r--r--arch/arm/mach-ep93xx/edb9302a.c28
-rw-r--r--arch/arm/mach-ep93xx/edb9307.c28
-rw-r--r--arch/arm/mach-ep93xx/edb9312.c8
-rw-r--r--arch/arm/mach-ep93xx/edb9315.c8
-rw-r--r--arch/arm/mach-ep93xx/edb9315a.c28
-rw-r--r--arch/arm/mach-ep93xx/gesbc9312.c29
-rw-r--r--arch/arm/mach-ep93xx/gpio.c6
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h34
-rw-r--r--arch/arm/mach-ep93xx/include/mach/platform.h12
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ts72xx.h2
-rw-r--r--arch/arm/mach-ep93xx/include/mach/uncompress.h21
-rw-r--r--arch/arm/mach-ep93xx/micro9.c34
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c28
-rw-r--r--arch/arm/mach-footbridge/cats-hw.c2
-rw-r--r--arch/arm/mach-footbridge/common.c2
-rw-r--r--arch/arm/mach-footbridge/dc21285.c2
-rw-r--r--arch/arm/mach-footbridge/dma.c2
-rw-r--r--arch/arm/mach-footbridge/include/mach/memory.h10
-rw-r--r--arch/arm/mach-footbridge/include/mach/system.h2
-rw-r--r--arch/arm/mach-footbridge/isa-irq.c5
-rw-r--r--arch/arm/mach-footbridge/isa-timer.c2
-rw-r--r--arch/arm/mach-footbridge/netwinder-hw.c2
-rw-r--r--arch/arm/mach-footbridge/time.c2
-rw-r--r--arch/arm/mach-h720x/common.c6
-rw-r--r--arch/arm/mach-h720x/cpu-h7202.c4
-rw-r--r--arch/arm/mach-imx/clock.c2
-rw-r--r--arch/arm/mach-imx/include/mach/irqs.h5
-rw-r--r--arch/arm/mach-imx/irq.c38
-rw-r--r--arch/arm/mach-imx/leds-mx1ads.c2
-rw-r--r--arch/arm/mach-imx/time.c2
-rw-r--r--arch/arm/mach-integrator/core.c2
-rw-r--r--arch/arm/mach-integrator/cpu.c2
-rw-r--r--arch/arm/mach-integrator/impd1.c2
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c5
-rw-r--r--arch/arm/mach-integrator/leds.c2
-rw-r--r--arch/arm/mach-integrator/pci_v3.c2
-rw-r--r--arch/arm/mach-iop13xx/include/mach/memory.h61
-rw-r--r--arch/arm/mach-iop13xx/include/mach/pci.h2
-rw-r--r--arch/arm/mach-iop13xx/io.c2
-rw-r--r--arch/arm/mach-iop13xx/msi.c3
-rw-r--r--arch/arm/mach-iop13xx/setup.c2
-rw-r--r--arch/arm/mach-iop13xx/tpmi.c2
-rw-r--r--arch/arm/mach-iop32x/glantank.c2
-rw-r--r--arch/arm/mach-iop32x/iq31244.c6
-rw-r--r--arch/arm/mach-iop32x/iq80321.c2
-rw-r--r--arch/arm/mach-iop32x/n2100.c2
-rw-r--r--arch/arm/mach-iop33x/iq80331.c2
-rw-r--r--arch/arm/mach-iop33x/iq80332.c2
-rw-r--r--arch/arm/mach-iop33x/uart.c2
-rw-r--r--arch/arm/mach-ixp2000/core.c33
-rw-r--r--arch/arm/mach-ixp2000/enp2611.c8
-rw-r--r--arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h8
-rw-r--r--arch/arm/mach-ixp2000/ixdp2400.c2
-rw-r--r--arch/arm/mach-ixp2000/ixdp2800.c2
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x00.c6
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x01.c6
-rw-r--r--arch/arm/mach-ixp2000/pci.c2
-rw-r--r--arch/arm/mach-ixp23xx/core.c4
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c8
-rw-r--r--arch/arm/mach-ixp23xx/pci.c2
-rw-r--r--arch/arm/mach-ixp4xx/common-pci.c9
-rw-r--r--arch/arm/mach-ixp4xx/common.c2
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/cpu.h9
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c8
-rw-r--r--arch/arm/mach-kirkwood/common.c84
-rw-r--r--arch/arm/mach-kirkwood/common.h7
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/include/mach/irqs.h1
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h14
-rw-r--r--arch/arm/mach-kirkwood/include/mach/timex.h1
-rw-r--r--arch/arm/mach-kirkwood/pcie.c6
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c1
-rw-r--r--arch/arm/mach-ks8695/cpu.c2
-rw-r--r--arch/arm/mach-ks8695/gpio.c22
-rw-r--r--arch/arm/mach-ks8695/include/mach/memory.h4
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-gpio.h4
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-lan.h4
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-wan.h4
-rw-r--r--arch/arm/mach-ks8695/include/mach/system.h2
-rw-r--r--arch/arm/mach-ks8695/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-ks8695/irq.c2
-rw-r--r--arch/arm/mach-ks8695/pci.c4
-rw-r--r--arch/arm/mach-ks8695/time.c2
-rw-r--r--arch/arm/mach-lh7a40x/Kconfig13
-rw-r--r--arch/arm/mach-lh7a40x/arch-kev7a400.c2
-rw-r--r--arch/arm/mach-lh7a40x/arch-lpd7a40x.c4
-rw-r--r--arch/arm/mach-lh7a40x/common.h1
-rw-r--r--arch/arm/mach-lh7a40x/include/mach/memory.h6
-rw-r--r--arch/arm/mach-lh7a40x/irq-lpd7a40x.c4
-rw-r--r--arch/arm/mach-lh7a40x/ssp-cpld.c2
-rw-r--r--arch/arm/mach-lh7a40x/time.c2
-rw-r--r--arch/arm/mach-loki/addr-map.c2
-rw-r--r--arch/arm/mach-loki/irq.c2
-rw-r--r--arch/arm/mach-msm/board-halibut.c5
-rw-r--r--arch/arm/mach-msm/common.c2
-rw-r--r--arch/arm/mach-msm/dma.c2
-rw-r--r--arch/arm/mach-msm/io.c2
-rw-r--r--arch/arm/mach-msm/irq.c5
-rw-r--r--arch/arm/mach-msm/timer.c3
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c2
-rw-r--r--arch/arm/mach-mv78xx0/common.c7
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/entry-macro.S18
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/irqs.h7
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/mv78xx0.h2
-rw-r--r--arch/arm/mach-mv78xx0/irq.c1
-rw-r--r--arch/arm/mach-mx2/devices.h15
-rw-r--r--arch/arm/mach-mx2/mx27ads.c12
-rw-r--r--arch/arm/mach-mx2/pcm038.c8
-rw-r--r--arch/arm/mach-mx2/serial.c51
-rw-r--r--arch/arm/mach-mx3/devices.c43
-rw-r--r--arch/arm/mach-mx3/devices.h6
-rw-r--r--arch/arm/mach-mx3/iomux.c6
-rw-r--r--arch/arm/mach-mx3/mm.c2
-rw-r--r--arch/arm/mach-mx3/mx31ads.c120
-rw-r--r--arch/arm/mach-mx3/mx31lite.c6
-rw-r--r--arch/arm/mach-mx3/pcm037.c6
-rw-r--r--arch/arm/mach-netx/generic.c7
-rw-r--r--arch/arm/mach-netx/include/mach/system.h2
-rw-r--r--arch/arm/mach-netx/pfifo.c2
-rw-r--r--arch/arm/mach-netx/time.c2
-rw-r--r--arch/arm/mach-netx/xc.c2
-rw-r--r--arch/arm/mach-ns9xxx/board-a9m9750dev.c5
-rw-r--r--arch/arm/mach-ns9xxx/gpio.c2
-rw-r--r--arch/arm/mach-ns9xxx/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-ns9xxx/irq.c2
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c1
-rw-r--r--arch/arm/mach-omap1/clock.c12
-rw-r--r--arch/arm/mach-omap1/clock.h6
-rw-r--r--arch/arm/mach-omap1/devices.c4
-rw-r--r--arch/arm/mach-omap1/fpga.c6
-rw-r--r--arch/arm/mach-omap1/id.c3
-rw-r--r--arch/arm/mach-omap1/io.c2
-rw-r--r--arch/arm/mach-omap1/irq.c3
-rw-r--r--arch/arm/mach-omap1/leds-h2p2-debug.c2
-rw-r--r--arch/arm/mach-omap1/mailbox.c2
-rw-r--r--arch/arm/mach-omap1/mcbsp.c45
-rw-r--r--arch/arm/mach-omap1/mux.c5
-rw-r--r--arch/arm/mach-omap1/pm.c2
-rw-r--r--arch/arm/mach-omap1/serial.c14
-rw-r--r--arch/arm/mach-omap1/time.c2
-rw-r--r--arch/arm/mach-omap1/timer32k.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig22
-rw-r--r--arch/arm/mach-omap2/Makefile12
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c3
-rw-r--r--arch/arm/mach-omap2/board-h4.c3
-rw-r--r--arch/arm/mach-omap2/board-ldp.c86
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c244
-rw-r--r--arch/arm/mach-omap2/board-overo.c242
-rw-r--r--arch/arm/mach-omap2/clock.c69
-rw-r--r--arch/arm/mach-omap2/clock.h2
-rw-r--r--arch/arm/mach-omap2/clock24xx.c3
-rw-r--r--arch/arm/mach-omap2/clock24xx.h238
-rw-r--r--arch/arm/mach-omap2/clock34xx.c33
-rw-r--r--arch/arm/mach-omap2/clock34xx.h248
-rw-r--r--arch/arm/mach-omap2/clockdomain.c623
-rw-r--r--arch/arm/mach-omap2/clockdomains.h305
-rw-r--r--arch/arm/mach-omap2/cm-regbits-24xx.h24
-rw-r--r--arch/arm/mach-omap2/cm-regbits-34xx.h42
-rw-r--r--arch/arm/mach-omap2/cm.h2
-rw-r--r--arch/arm/mach-omap2/devices.c227
-rw-r--r--arch/arm/mach-omap2/gpmc.c90
-rw-r--r--arch/arm/mach-omap2/id.c42
-rw-r--r--arch/arm/mach-omap2/io.c154
-rw-r--r--arch/arm/mach-omap2/irq.c83
-rw-r--r--arch/arm/mach-omap2/mailbox.c2
-rw-r--r--arch/arm/mach-omap2/mcbsp.c151
-rw-r--r--arch/arm/mach-omap2/memory.c17
-rw-r--r--arch/arm/mach-omap2/memory.h7
-rw-r--r--arch/arm/mach-omap2/mux.c250
-rw-r--r--arch/arm/mach-omap2/pm.c2
-rw-r--r--arch/arm/mach-omap2/powerdomain.c1113
-rw-r--r--arch/arm/mach-omap2/powerdomains.h187
-rw-r--r--arch/arm/mach-omap2/powerdomains24xx.h200
-rw-r--r--arch/arm/mach-omap2/powerdomains34xx.h327
-rw-r--r--arch/arm/mach-omap2/prcm-common.h3
-rw-r--r--arch/arm/mach-omap2/prm-regbits-24xx.h12
-rw-r--r--arch/arm/mach-omap2/prm-regbits-34xx.h11
-rw-r--r--arch/arm/mach-omap2/prm.h5
-rw-r--r--arch/arm/mach-omap2/serial.c119
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S (renamed from arch/arm/mach-omap2/sleep.S)32
-rw-r--r--arch/arm/mach-omap2/sram34xx.S179
-rw-r--r--arch/arm/mach-orion5x/Kconfig26
-rw-r--r--arch/arm/mach-orion5x/Makefile4
-rw-r--r--arch/arm/mach-orion5x/addr-map.c2
-rw-r--r--arch/arm/mach-orion5x/common.c74
-rw-r--r--arch/arm/mach-orion5x/common.h2
-rw-r--r--arch/arm/mach-orion5x/edmini_v2-setup.c262
-rw-r--r--arch/arm/mach-orion5x/gpio.c2
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h6
-rw-r--r--arch/arm/mach-orion5x/include/mach/timex.h2
-rw-r--r--arch/arm/mach-orion5x/irq.c4
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c2
-rw-r--r--arch/arm/mach-orion5x/lsmini-setup.c279
-rw-r--r--arch/arm/mach-orion5x/mpp.c2
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c117
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c369
-rw-r--r--arch/arm/mach-orion5x/tsx09-common.c3
-rw-r--r--arch/arm/mach-pnx4008/clock.c2
-rw-r--r--arch/arm/mach-pnx4008/core.c2
-rw-r--r--arch/arm/mach-pnx4008/dma.c2
-rw-r--r--arch/arm/mach-pnx4008/gpio.c2
-rw-r--r--arch/arm/mach-pnx4008/include/mach/system.h2
-rw-r--r--arch/arm/mach-pnx4008/include/mach/timex.h2
-rw-r--r--arch/arm/mach-pnx4008/irq.c2
-rw-r--r--arch/arm/mach-pnx4008/pm.c2
-rw-r--r--arch/arm/mach-pnx4008/serial.c3
-rw-r--r--arch/arm/mach-pnx4008/time.c2
-rw-r--r--arch/arm/mach-pxa/Kconfig94
-rw-r--r--arch/arm/mach-pxa/Makefile37
-rw-r--r--arch/arm/mach-pxa/akita-ioexp.c222
-rw-r--r--arch/arm/mach-pxa/am200epd.c374
-rw-r--r--arch/arm/mach-pxa/cm-x255.c258
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.h13
-rw-r--r--arch/arm/mach-pxa/cm-x270.c472
-rw-r--r--arch/arm/mach-pxa/cm-x2xx-pci.c (renamed from arch/arm/mach-pxa/cm-x270-pci.c)56
-rw-r--r--arch/arm/mach-pxa/cm-x2xx-pci.h13
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c531
-rw-r--r--arch/arm/mach-pxa/cm-x300.c465
-rw-r--r--arch/arm/mach-pxa/colibri.c11
-rw-r--r--arch/arm/mach-pxa/corgi.c478
-rw-r--r--arch/arm/mach-pxa/corgi_lcd.c290
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c1
-rw-r--r--arch/arm/mach-pxa/corgi_ssp.c276
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c (renamed from arch/arm/mach-pxa/cpu-pxa.c)2
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa3xx.c258
-rw-r--r--arch/arm/mach-pxa/devices.h1
-rw-r--r--arch/arm/mach-pxa/e330.c43
-rw-r--r--arch/arm/mach-pxa/e350.c43
-rw-r--r--arch/arm/mach-pxa/e400.c94
-rw-r--r--arch/arm/mach-pxa/e400_lcd.c56
-rw-r--r--arch/arm/mach-pxa/e740.c169
-rw-r--r--arch/arm/mach-pxa/e740_lcd.c123
-rw-r--r--arch/arm/mach-pxa/e750.c (renamed from arch/arm/mach-pxa/e750_lcd.c)67
-rw-r--r--arch/arm/mach-pxa/e800.c (renamed from arch/arm/mach-pxa/e800_lcd.c)79
-rw-r--r--arch/arm/mach-pxa/em-x270.c5
-rw-r--r--arch/arm/mach-pxa/eseries.c157
-rw-r--r--arch/arm/mach-pxa/eseries.h4
-rw-r--r--arch/arm/mach-pxa/eseries_udc.c57
-rw-r--r--arch/arm/mach-pxa/generic.c9
-rw-r--r--arch/arm/mach-pxa/generic.h1
-rw-r--r--arch/arm/mach-pxa/gpio.c4
-rw-r--r--arch/arm/mach-pxa/gumstix.c100
-rw-r--r--arch/arm/mach-pxa/idp.c78
-rw-r--r--arch/arm/mach-pxa/include/mach/akita.h32
-rw-r--r--arch/arm/mach-pxa/include/mach/corgi.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/entry-macro.S4
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h81
-rw-r--r--arch/arm/mach-pxa/include/mach/i2c.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h19
-rw-r--r--arch/arm/mach-pxa/include/mach/littleton.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/memory.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa25x.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa320.h8
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp.h5
-rw-r--r--arch/arm/mach-pxa/include/mach/mioa701.h67
-rw-r--r--arch/arm/mach-pxa/include/mach/ohci.h16
-rw-r--r--arch/arm/mach-pxa/include/mach/palmz72.h80
-rw-r--r--arch/arm/mach-pxa/include/mach/pm.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/poodle.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa-regs.h320
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa3xx-regs.h22
-rw-r--r--arch/arm/mach-pxa/include/mach/spitz.h42
-rw-r--r--arch/arm/mach-pxa/include/mach/ssp.h24
-rw-r--r--arch/arm/mach-pxa/include/mach/trizeps4.h84
-rw-r--r--arch/arm/mach-pxa/include/mach/viper.h96
-rw-r--r--arch/arm/mach-pxa/irq.c2
-rw-r--r--arch/arm/mach-pxa/leds-trizeps4.c134
-rw-r--r--arch/arm/mach-pxa/leds.c2
-rw-r--r--arch/arm/mach-pxa/littleton.c205
-rw-r--r--arch/arm/mach-pxa/lpd270.c99
-rw-r--r--arch/arm/mach-pxa/lubbock.c26
-rw-r--r--arch/arm/mach-pxa/magician.c16
-rw-r--r--arch/arm/mach-pxa/mainstone.c15
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c225
-rw-r--r--arch/arm/mach-pxa/mioa701.c905
-rw-r--r--arch/arm/mach-pxa/mioa701_bootresume.S36
-rw-r--r--arch/arm/mach-pxa/mp900.c100
-rw-r--r--arch/arm/mach-pxa/palmtx.c20
-rw-r--r--arch/arm/mach-pxa/palmz72.c554
-rw-r--r--arch/arm/mach-pxa/pcm027.c32
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c33
-rw-r--r--arch/arm/mach-pxa/pm.c18
-rw-r--r--arch/arm/mach-pxa/poodle.c353
-rw-r--r--arch/arm/mach-pxa/pxa25x.c66
-rw-r--r--arch/arm/mach-pxa/pxa27x.c66
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c45
-rw-r--r--arch/arm/mach-pxa/reset.c2
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c16
-rw-r--r--arch/arm/mach-pxa/spitz.c535
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c28
-rw-r--r--arch/arm/mach-pxa/ssp.c2
-rw-r--r--arch/arm/mach-pxa/time.c2
-rw-r--r--arch/arm/mach-pxa/trizeps4.c551
-rw-r--r--arch/arm/mach-pxa/viper.c951
-rw-r--r--arch/arm/mach-pxa/zylonite.c17
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c12
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c10
-rw-r--r--arch/arm/mach-realview/core.c2
-rw-r--r--arch/arm/mach-realview/core.h2
-rw-r--r--arch/arm/mach-realview/include/mach/system.h2
-rw-r--r--arch/arm/mach-realview/localtimer.c2
-rw-r--r--arch/arm/mach-realview/platsmp.c2
-rw-r--r--arch/arm/mach-realview/realview_eb.c2
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c2
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c2
-rw-r--r--arch/arm/mach-rpc/dma.c2
-rw-r--r--arch/arm/mach-rpc/include/mach/memory.h8
-rw-r--r--arch/arm/mach-rpc/include/mach/system.h2
-rw-r--r--arch/arm/mach-rpc/include/mach/uncompress.h2
-rw-r--r--arch/arm/mach-rpc/irq.c2
-rw-r--r--arch/arm/mach-rpc/riscpc.c2
-rw-r--r--arch/arm/mach-s3c2400/gpio.c2
-rw-r--r--arch/arm/mach-s3c2410/bast-irq.c5
-rw-r--r--arch/arm/mach-s3c2410/clock.c2
-rw-r--r--arch/arm/mach-s3c2410/gpio.c2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/system-reset.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/system.h2
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-otom.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-qt2410.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2410.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-tct_hammer.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c2
-rw-r--r--arch/arm/mach-s3c2410/pm.c2
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c2
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c2
-rw-r--r--arch/arm/mach-s3c2412/clock.c2
-rw-r--r--arch/arm/mach-s3c2412/dma.c2
-rw-r--r--arch/arm/mach-s3c2412/irq.c6
-rw-r--r--arch/arm/mach-s3c2412/mach-smdk2413.c2
-rw-r--r--arch/arm/mach-s3c2412/mach-vstms.c3
-rw-r--r--arch/arm/mach-s3c2412/pm.c2
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c2
-rw-r--r--arch/arm/mach-s3c2440/clock.c2
-rw-r--r--arch/arm/mach-s3c2440/dsc.c2
-rw-r--r--arch/arm/mach-s3c2440/irq.c9
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c3
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-rx3715.c3
-rw-r--r--arch/arm/mach-s3c2440/mach-smdk2440.c2
-rw-r--r--arch/arm/mach-s3c2440/s3c2440.c2
-rw-r--r--arch/arm/mach-s3c2442/clock.c2
-rw-r--r--arch/arm/mach-s3c2443/clock.c2
-rw-r--r--arch/arm/mach-s3c2443/dma.c2
-rw-r--r--arch/arm/mach-s3c2443/irq.c7
-rw-r--r--arch/arm/mach-s3c2443/mach-smdk2443.c2
-rw-r--r--arch/arm/mach-s3c2443/s3c2443.c2
-rw-r--r--arch/arm/mach-sa1100/badge4.c44
-rw-r--r--arch/arm/mach-sa1100/cpu-sa1100.c4
-rw-r--r--arch/arm/mach-sa1100/cpu-sa1110.c3
-rw-r--r--arch/arm/mach-sa1100/generic.c14
-rw-r--r--arch/arm/mach-sa1100/include/mach/SA-1100.h16
-rw-r--r--arch/arm/mach-sa1100/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-sa1100/include/mach/memory.h16
-rw-r--r--arch/arm/mach-sa1100/irq.c4
-rw-r--r--arch/arm/mach-sa1100/neponset.c11
-rw-r--r--arch/arm/mach-sa1100/pleb.c13
-rw-r--r--arch/arm/mach-sa1100/simpad.c2
-rw-r--r--arch/arm/mach-sa1100/ssp.c2
-rw-r--r--arch/arm/mach-shark/core.c2
-rw-r--r--arch/arm/mach-shark/include/mach/system.h2
-rw-r--r--arch/arm/mach-shark/irq.c2
-rw-r--r--arch/arm/mach-shark/leds.c2
-rw-r--r--arch/arm/mach-versatile/core.c5
-rw-r--r--arch/arm/mach-versatile/include/mach/system.h2
-rw-r--r--arch/arm/mach-versatile/pci.c2
-rw-r--r--arch/arm/mach-versatile/versatile_ab.c2
-rw-r--r--arch/arm/mach-versatile/versatile_pb.c2
-rw-r--r--arch/arm/mm/Kconfig10
-rw-r--r--arch/arm/mm/Makefile2
-rw-r--r--arch/arm/mm/abort-ev7.S1
-rw-r--r--arch/arm/mm/abort-nommu.S1
-rw-r--r--arch/arm/mm/alignment.c2
-rw-r--r--arch/arm/mm/cache-feroceon-l2.c42
-rw-r--r--arch/arm/mm/cache-l2x0.c2
-rw-r--r--arch/arm/mm/cache-v7.S10
-rw-r--r--arch/arm/mm/cache-xsc3l2.c3
-rw-r--r--arch/arm/mm/copypage-v4mc.c2
-rw-r--r--arch/arm/mm/copypage-v6.c1
-rw-r--r--arch/arm/mm/copypage-xscale.c2
-rw-r--r--arch/arm/mm/dma-mapping.c (renamed from arch/arm/mm/consistent.c)104
-rw-r--r--arch/arm/mm/extable.c2
-rw-r--r--arch/arm/mm/fault-armv.c13
-rw-r--r--arch/arm/mm/fault.c7
-rw-r--r--arch/arm/mm/flush.c1
-rw-r--r--arch/arm/mm/init.c193
-rw-r--r--arch/arm/mm/iomap.c3
-rw-r--r--arch/arm/mm/ioremap.c15
-rw-r--r--arch/arm/mm/mm.h3
-rw-r--r--arch/arm/mm/mmap.c6
-rw-r--r--arch/arm/mm/mmu.c106
-rw-r--r--arch/arm/mm/nommu.c18
-rw-r--r--arch/arm/mm/proc-arm1020.S26
-rw-r--r--arch/arm/mm/proc-arm1020e.S26
-rw-r--r--arch/arm/mm/proc-arm1022.S26
-rw-r--r--arch/arm/mm/proc-arm1026.S26
-rw-r--r--arch/arm/mm/proc-arm6_7.S27
-rw-r--r--arch/arm/mm/proc-arm720.S25
-rw-r--r--arch/arm/mm/proc-arm740.S2
-rw-r--r--arch/arm/mm/proc-arm7tdmi.S2
-rw-r--r--arch/arm/mm/proc-arm920.S28
-rw-r--r--arch/arm/mm/proc-arm922.S26
-rw-r--r--arch/arm/mm/proc-arm925.S26
-rw-r--r--arch/arm/mm/proc-arm926.S26
-rw-r--r--arch/arm/mm/proc-arm940.S2
-rw-r--r--arch/arm/mm/proc-arm946.S2
-rw-r--r--arch/arm/mm/proc-arm9tdmi.S2
-rw-r--r--arch/arm/mm/proc-feroceon.S33
-rw-r--r--arch/arm/mm/proc-macros.S170
-rw-r--r--arch/arm/mm/proc-sa110.S21
-rw-r--r--arch/arm/mm/proc-sa1100.S21
-rw-r--r--arch/arm/mm/proc-v6.S42
-rw-r--r--arch/arm/mm/proc-v7.S39
-rw-r--r--arch/arm/mm/proc-xsc3.S56
-rw-r--r--arch/arm/mm/proc-xscale.S76
-rw-r--r--arch/arm/mm/tlb-v7.S2
-rw-r--r--arch/arm/nwfpe/fpa11_cpdt.c2
-rw-r--r--arch/arm/oprofile/Makefile1
-rw-r--r--arch/arm/oprofile/backtrace.c2
-rw-r--r--arch/arm/oprofile/common.c4
-rw-r--r--arch/arm/oprofile/op_arm_model.h1
-rw-r--r--arch/arm/oprofile/op_model_mpcore.c2
-rw-r--r--arch/arm/oprofile/op_model_v7.c411
-rw-r--r--arch/arm/oprofile/op_model_v7.h103
-rw-r--r--arch/arm/oprofile/op_model_xscale.c2
-rw-r--r--arch/arm/plat-iop/i2c.c2
-rw-r--r--arch/arm/plat-iop/io.c2
-rw-r--r--arch/arm/plat-iop/pci.c2
-rw-r--r--arch/arm/plat-iop/time.c2
-rw-r--r--arch/arm/plat-mxc/Kconfig11
-rw-r--r--arch/arm/plat-mxc/Makefile4
-rw-r--r--arch/arm/plat-mxc/devices.c36
-rw-r--r--arch/arm/plat-mxc/dma-mx1-mx2.c840
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31ads.h3
-rw-r--r--arch/arm/plat-mxc/include/mach/clock.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h3
-rw-r--r--arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h89
-rw-r--r--arch/arm/plat-mxc/include/mach/entry-macro.S12
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h24
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx3.h20
-rw-r--r--arch/arm/plat-mxc/include/mach/irqs.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/mx27.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/mx31.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc.h6
-rw-r--r--arch/arm/plat-mxc/irq.c36
-rw-r--r--arch/arm/plat-omap/Kconfig33
-rw-r--r--arch/arm/plat-omap/Makefile2
-rw-r--r--arch/arm/plat-omap/clock.c3
-rw-r--r--arch/arm/plat-omap/common.c42
-rw-r--r--arch/arm/plat-omap/cpu-omap.c2
-rw-r--r--arch/arm/plat-omap/debug-devices.c2
-rw-r--r--arch/arm/plat-omap/debug-leds.c2
-rw-r--r--arch/arm/plat-omap/devices.c24
-rw-r--r--arch/arm/plat-omap/dma.c8
-rw-r--r--arch/arm/plat-omap/dmtimer.c4
-rw-r--r--arch/arm/plat-omap/fb.c2
-rw-r--r--arch/arm/plat-omap/gpio.c78
-rw-r--r--arch/arm/plat-omap/include/mach/board-2430sdp.h6
-rw-r--r--arch/arm/plat-omap/include/mach/board-apollon.h6
-rw-r--r--arch/arm/plat-omap/include/mach/board-h4.h5
-rw-r--r--arch/arm/plat-omap/include/mach/board-ldp.h36
-rw-r--r--arch/arm/plat-omap/include/mach/board-omap3beagle.h33
-rw-r--r--arch/arm/plat-omap/include/mach/board-overo.h26
-rw-r--r--arch/arm/plat-omap/include/mach/board.h2
-rw-r--r--arch/arm/plat-omap/include/mach/clock.h3
-rw-r--r--arch/arm/plat-omap/include/mach/clockdomain.h106
-rw-r--r--arch/arm/plat-omap/include/mach/common.h3
-rw-r--r--arch/arm/plat-omap/include/mach/control.h23
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h5
-rw-r--r--arch/arm/plat-omap/include/mach/debug-macro.S12
-rw-r--r--arch/arm/plat-omap/include/mach/entry-macro.S12
-rw-r--r--arch/arm/plat-omap/include/mach/fpga.h12
-rw-r--r--arch/arm/plat-omap/include/mach/gpio.h6
-rw-r--r--arch/arm/plat-omap/include/mach/gpmc.h12
-rw-r--r--arch/arm/plat-omap/include/mach/hardware.h12
-rw-r--r--arch/arm/plat-omap/include/mach/io.h59
-rw-r--r--arch/arm/plat-omap/include/mach/irqs.h61
-rw-r--r--arch/arm/plat-omap/include/mach/mcbsp.h44
-rw-r--r--arch/arm/plat-omap/include/mach/memory.h2
-rw-r--r--arch/arm/plat-omap/include/mach/mux.h180
-rw-r--r--arch/arm/plat-omap/include/mach/omap1510.h2
-rw-r--r--arch/arm/plat-omap/include/mach/omap16xx.h7
-rw-r--r--arch/arm/plat-omap/include/mach/omap24xx.h2
-rw-r--r--arch/arm/plat-omap/include/mach/omapfb.h3
-rw-r--r--arch/arm/plat-omap/include/mach/pm.h7
-rw-r--r--arch/arm/plat-omap/include/mach/powerdomain.h166
-rw-r--r--arch/arm/plat-omap/include/mach/sdrc.h8
-rw-r--r--arch/arm/plat-omap/include/mach/serial.h18
-rw-r--r--arch/arm/plat-omap/include/mach/sram.h10
-rw-r--r--arch/arm/plat-omap/include/mach/system.h2
-rw-r--r--arch/arm/plat-omap/io.c107
-rw-r--r--arch/arm/plat-omap/mailbox.c2
-rw-r--r--arch/arm/plat-omap/mcbsp.c431
-rw-r--r--arch/arm/plat-omap/mux.c2
-rw-r--r--arch/arm/plat-omap/ocpi.c2
-rw-r--r--arch/arm/plat-omap/sram.c55
-rw-r--r--arch/arm/plat-omap/usb.c2
-rw-r--r--arch/arm/plat-s3c24xx/clock.c2
-rw-r--r--arch/arm/plat-s3c24xx/common-smdk.c2
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c4
-rw-r--r--arch/arm/plat-s3c24xx/devs.c2
-rw-r--r--arch/arm/plat-s3c24xx/dma.c2
-rw-r--r--arch/arm/plat-s3c24xx/gpio.c2
-rw-r--r--arch/arm/plat-s3c24xx/irq.c26
-rw-r--r--arch/arm/plat-s3c24xx/pm-simtec.c2
-rw-r--r--arch/arm/plat-s3c24xx/pm.c2
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x-clock.c2
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x-irq.c9
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x.c2
-rw-r--r--arch/arm/plat-s3c24xx/time.c2
-rw-r--r--arch/arm/tools/mach-types44
-rw-r--r--arch/arm/vfp/entry.S8
-rw-r--r--arch/arm/vfp/vfphw.S25
-rw-r--r--drivers/char/hw_random/omap-rng.c33
-rw-r--r--drivers/hwmon/Kconfig9
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/max1111.c244
-rw-r--r--drivers/i2c/busses/i2c-omap.c12
-rw-r--r--drivers/i2c/busses/i2c-pxa.c94
-rw-r--r--drivers/input/keyboard/corgikbd.c6
-rw-r--r--drivers/input/keyboard/omap-keypad.c2
-rw-r--r--drivers/input/keyboard/spitzkbd.c6
-rw-r--r--drivers/input/keyboard/tosakbd.c6
-rw-r--r--drivers/input/touchscreen/Kconfig1
-rw-r--r--drivers/input/touchscreen/ads7846.c68
-rw-r--r--drivers/input/touchscreen/ucb1400_ts.c382
-rw-r--r--drivers/leds/Kconfig14
-rw-r--r--drivers/leds/Makefile2
-rw-r--r--drivers/leds/leds-corgi.c124
-rw-r--r--drivers/leds/leds-spitz.c131
-rw-r--r--drivers/media/video/pxa_camera.c12
-rw-r--r--drivers/mfd/Kconfig9
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/ucb1400_core.c106
-rw-r--r--drivers/mmc/host/omap.c11
-rw-r--r--drivers/mmc/host/pxamci.c4
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h3
-rw-r--r--drivers/mtd/nand/cmx270_nand.c2
-rw-r--r--drivers/net/Kconfig8
-rw-r--r--drivers/net/cs89x0.c12
-rw-r--r--drivers/net/irda/pxaficp_ir.c8
-rw-r--r--drivers/net/smc91x.c9
-rw-r--r--drivers/net/smc91x.h13
-rw-r--r--drivers/pcmcia/Kconfig3
-rw-r--r--drivers/pcmcia/Makefile16
-rw-r--r--drivers/pcmcia/pxa2xx_base.c44
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x255.c154
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c14
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x2xx.c49
-rw-r--r--drivers/pcmcia/pxa2xx_palmld.c151
-rw-r--r--drivers/pcmcia/pxa2xx_trizeps4.c256
-rw-r--r--drivers/pcmcia/pxa2xx_viper.c179
-rw-r--r--drivers/power/Kconfig8
-rw-r--r--drivers/power/Makefile2
-rw-r--r--drivers/power/palmtx_battery.c198
-rw-r--r--drivers/power/wm97xx_battery.c272
-rw-r--r--drivers/serial/8250.c23
-rw-r--r--drivers/serial/pxa.c5
-rw-r--r--drivers/serial/serial_ks8695.c61
-rw-r--r--drivers/spi/omap2_mcspi.c18
-rw-r--r--drivers/spi/omap_uwire.c23
-rw-r--r--drivers/usb/host/ohci-omap.c14
-rw-r--r--drivers/usb/host/ohci-pxa27x.c259
-rw-r--r--drivers/video/Kconfig31
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/am200epd.c295
-rw-r--r--drivers/video/atmel_lcdfb.c4
-rw-r--r--drivers/video/backlight/Kconfig15
-rw-r--r--drivers/video/backlight/Makefile2
-rw-r--r--drivers/video/backlight/corgi_lcd.c641
-rw-r--r--drivers/video/backlight/lcd.c18
-rw-r--r--drivers/video/backlight/tdo24m.c396
-rw-r--r--drivers/video/fbmem.c1
-rw-r--r--drivers/video/metronomefb.c288
-rw-r--r--drivers/video/omap/dispc.c21
-rw-r--r--drivers/video/omap/dispc.h2
-rw-r--r--drivers/video/omap/lcd_h4.c4
-rw-r--r--drivers/video/omap/lcdc.c2
-rw-r--r--drivers/video/omap/lcdc.h2
-rw-r--r--drivers/video/omap/omapfb_main.c15
-rw-r--r--drivers/video/omap/rfbi.c9
-rw-r--r--drivers/video/omap/sossi.c8
-rw-r--r--drivers/watchdog/ixp4xx_wdt.c4
-rw-r--r--include/linux/lcd.h3
-rw-r--r--include/linux/smc91x.h11
-rw-r--r--include/linux/spi/ads7846.h3
-rw-r--r--include/linux/spi/corgi_lcd.h20
-rw-r--r--include/linux/ucb1400.h161
-rw-r--r--include/linux/wm97xx_batt.h26
-rw-r--r--include/video/atmel_lcdc.h1
-rw-r--r--include/video/metronomefb.h31
-rw-r--r--sound/arm/pxa2xx-ac97.c4
-rw-r--r--sound/soc/pxa/corgi.c34
-rw-r--r--sound/soc/pxa/pxa2xx-ac97.c18
-rw-r--r--sound/soc/pxa/pxa2xx-i2s.c44
-rw-r--r--sound/soc/pxa/spitz.c46
813 files changed, 34828 insertions, 9456 deletions
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index b2ed6983f40..46f9684d0b2 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -135,11 +135,7 @@ when the Mic is inserted:-
static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
{
- if(SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
-
+ gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
@@ -269,11 +265,7 @@ powered only when the spk is in use.
/* turn speaker amplifier on/off depending on use */
static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+ gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
diff --git a/MAINTAINERS b/MAINTAINERS
index 8dae4555f10..4d7de2b44c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -466,6 +466,12 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/AFEB9260 MACHINE SUPPORT
+P: Sergey Lapin
+M: slapin@ossfans.org
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/AJECO 1ARM MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
@@ -491,7 +497,7 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
-ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
+ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -623,6 +629,12 @@ M: marek.vasut@gmail.com
W: http://hackndev.com
S: Maintained
+ARM/PALMZ72 SUPPORT
+P: Sergey Lapin
+M: slapin@ossfans.org
+W: http://hackndev.com
+S: Maintained
+
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 70dba166890..efeed65b4a6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -148,7 +148,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
bool
- default y
config GENERIC_ISA_DMA
bool
@@ -178,6 +177,11 @@ config OPROFILE_MPCORE
config OPROFILE_ARM11_CORE
bool
+config OPROFILE_ARMV7
+ def_bool y
+ depends on CPU_V7 && !SMP
+ bool
+
endif
config VECTORS_BASE
@@ -245,6 +249,7 @@ config ARCH_CLPS7500
select TIMER_ACORN
select ISA
select NO_IOPORT
+ select ARCH_SPARSEMEM_ENABLE
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
@@ -306,6 +311,7 @@ config ARCH_IOP13XX
select PLAT_IOP
select PCI
select ARCH_SUPPORTS_MSI
+ select VMSPLIT_1G
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -350,6 +356,7 @@ config ARCH_IXP4XX
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ZONE_DMA if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
@@ -434,7 +441,7 @@ config ARCH_ORION5X
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
- Orion-2 (5281).
+ Orion-2 (5281), Orion-1-90 (6183).
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
@@ -464,6 +471,7 @@ config ARCH_RPC
select HAVE_PATA_PLATFORM
select ISA_DMA_API
select NO_IOPORT
+ select ARCH_SPARSEMEM_ENABLE
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -471,9 +479,7 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ISA
- select ARCH_DISCONTIGMEM_ENABLE
select ARCH_SPARSEMEM_ENABLE
- select ARCH_SELECT_MEMORY_MODEL
select ARCH_MTD_XIP
select GENERIC_GPIO
select GENERIC_TIME
@@ -497,6 +503,7 @@ config ARCH_SHARK
bool "Shark"
select ISA
select ISA_DMA
+ select ZONE_DMA
select PCI
help
Support for the StrongARM based Digital DNARD machine, also known
@@ -504,6 +511,8 @@ config ARCH_SHARK
config ARCH_LH7A40X
bool "Sharp LH7A40X"
+ select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
+ select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
@@ -515,7 +524,9 @@ config ARCH_DAVINCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select ZONE_DMA
help
Support for TI's DaVinci platform.
@@ -734,6 +745,29 @@ config SMP
If you don't know what to do here, say N.
+choice
+ prompt "Memory split"
+ default VMSPLIT_3G
+ help
+ Select the desired split between kernel and user memory.
+
+ If you are not absolutely sure what you are doing, leave this
+ option alone!
+
+ config VMSPLIT_3G
+ bool "3G/1G user/kernel split"
+ config VMSPLIT_2G
+ bool "2G/2G user/kernel split"
+ config VMSPLIT_1G
+ bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+ hex
+ default 0x40000000 if VMSPLIT_1G
+ default 0x80000000 if VMSPLIT_2G
+ default 0xC0000000
+
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
@@ -815,20 +849,18 @@ config ARCH_FLATMEM_HAS_HOLES
default y
depends on FLATMEM
+# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
bool
- default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
config ARCH_SPARSEMEM_ENABLE
bool
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool ARCH_SPARSEMEM_ENABLE
+
config ARCH_SELECT_MEMORY_MODEL
- bool
+ def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
config NODES_SHIFT
int
@@ -845,7 +877,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_AT91 || ARCH_DAVINCI || \
ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
@@ -1005,9 +1037,9 @@ config ATAGS_PROC
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+menu "CPU Power Management"
-menu "CPU Frequency scaling"
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
@@ -1047,10 +1079,12 @@ config CPU_FREQ_PXA
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
-endmenu
-
endif
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
menu "Floating point emulation"
comment "At least one emulation must be selected"
@@ -1202,6 +1236,8 @@ source "drivers/power/Kconfig"
source "drivers/hwmon/Kconfig"
+source "drivers/thermal/Kconfig"
+
source "drivers/watchdog/Kconfig"
source "drivers/ssb/Kconfig"
@@ -1222,6 +1258,10 @@ source "drivers/usb/Kconfig"
source "drivers/mmc/Kconfig"
+source "drivers/memstick/Kconfig"
+
+source "drivers/accessibility/Kconfig"
+
source "drivers/leds/Kconfig"
source "drivers/rtc/Kconfig"
@@ -1230,6 +1270,8 @@ source "drivers/dma/Kconfig"
source "drivers/dca/Kconfig"
+source "drivers/auxdisplay/Kconfig"
+
source "drivers/regulator/Kconfig"
source "drivers/uio/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0e97f5cc541..7d5121260fd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -47,7 +47,7 @@ comma = ,
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
+arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
@@ -118,6 +118,7 @@ endif
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
+ machine-$(CONFIG_ARCH_OMAP3) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 94462a097f8..7a03f200788 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -76,7 +76,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
EXTRA_CFLAGS := -fpic -fno-builtin
-EXTRA_AFLAGS :=
+EXTRA_AFLAGS := -Wa,-march=all
# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
# linker symbols. We only define initrd_phys and params_phys if the
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d42f89b7760..84a1e0496a3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -421,6 +421,7 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
add r1, r1, #1048576
str r1, [r0]
mov pc, lr
+ENDPROC(__setup_mmu)
__armv4_mmu_cache_on:
mov r12, lr
@@ -801,7 +802,7 @@ loop1:
add r2, r2, #4 @ add 4 (line length offset)
ldr r4, =0x3ff
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
- .word 0xe16f5f14 @ clz r5, r4 - find bit position of way size increment
+ clz r5, r4 @ find bit position of way size increment
ldr r7, =0x7fff
ands r7, r7, r1, lsr #13 @ extract max number of the index size
loop2:
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 3e073467cac..2e32acca02f 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -12,7 +12,8 @@ config ICST307
config SA1111
bool
- select DMABOUNCE
+ select DMABOUNCE if !ARCH_PXA
+ select ZONE_DMA if !ARCH_PXA
config DMABOUNCE
bool
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index aecc6c3f908..f030f0775be 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -154,9 +154,7 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
#endif
write_lock_irqsave(&device_info->lock, flags);
-
list_add(&buf->node, &device_info->safe_buffers);
-
write_unlock_irqrestore(&device_info->lock, flags);
return buf;
@@ -205,8 +203,22 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
/* ************************************************** */
-static inline dma_addr_t
-map_single(struct device *dev, void *ptr, size_t size,
+static struct safe_buffer *find_safe_buffer_dev(struct device *dev,
+ dma_addr_t dma_addr, const char *where)
+{
+ if (!dev || !dev->archdata.dmabounce)
+ return NULL;
+ if (dma_mapping_error(dev, dma_addr)) {
+ if (dev)
+ dev_err(dev, "Trying to %s invalid mapping\n", where);
+ else
+ pr_err("unknown device: Trying to %s invalid mapping\n", where);
+ return NULL;
+ }
+ return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
+}
+
+static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
@@ -270,33 +282,21 @@ map_single(struct device *dev, void *ptr, size_t size,
return dma_addr;
}
-static inline void
-unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
- struct safe_buffer *buf = NULL;
-
- /*
- * Trying to unmap an invalid mapping
- */
- if (dma_mapping_error(dev, dma_addr)) {
- dev_err(dev, "Trying to unmap invalid mapping\n");
- return;
- }
-
- if (device_info)
- buf = find_safe_buffer(device_info, dma_addr);
+ struct safe_buffer *buf = find_safe_buffer_dev(dev, dma_addr, "unmap");
if (buf) {
BUG_ON(buf->size != size);
+ BUG_ON(buf->direction != dir);
dev_dbg(dev,
"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
buf->safe, buf->safe_dma_addr);
- DO_STATS ( device_info->bounce_count++ );
+ DO_STATS(dev->archdata.dmabounce->bounce_count++);
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
void *ptr = buf->ptr;
@@ -317,74 +317,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
dmac_clean_range(ptr, ptr + size);
outer_clean_range(__pa(ptr), __pa(ptr) + size);
}
- free_safe_buffer(device_info, buf);
- }
-}
-
-static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
-{
- struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
- struct safe_buffer *buf = NULL;
-
- if (device_info)
- buf = find_safe_buffer(device_info, dma_addr);
-
- if (buf) {
- /*
- * Both of these checks from original code need to be
- * commented out b/c some drivers rely on the following:
- *
- * 1) Drivers may map a large chunk of memory into DMA space
- * but only sync a small portion of it. Good example is
- * allocating a large buffer, mapping it, and then
- * breaking it up into small descriptors. No point
- * in syncing the whole buffer if you only have to
- * touch one descriptor.
- *
- * 2) Buffers that are mapped as DMA_BIDIRECTIONAL are
- * usually only synced in one dir at a time.
- *
- * See drivers/net/eepro100.c for examples of both cases.
- *
- * -ds
- *
- * BUG_ON(buf->size != size);
- * BUG_ON(buf->direction != dir);
- */
-
- dev_dbg(dev,
- "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
- buf->safe, buf->safe_dma_addr);
-
- DO_STATS ( device_info->bounce_count++ );
-
- switch (dir) {
- case DMA_FROM_DEVICE:
- dev_dbg(dev,
- "%s: copy back safe %p to unsafe %p size %d\n",
- __func__, buf->safe, buf->ptr, size);
- memcpy(buf->ptr, buf->safe, size);
- break;
- case DMA_TO_DEVICE:
- dev_dbg(dev,
- "%s: copy out unsafe %p to safe %p, size %d\n",
- __func__,buf->ptr, buf->safe, size);
- memcpy(buf->safe, buf->ptr, size);
- break;
- case DMA_BIDIRECTIONAL:
- BUG(); /* is this allowed? what does it mean? */
- default:
- BUG();
- }
- /*
- * No need to sync the safe buffer - it was allocated
- * via the coherent allocators.
- */
- return 0;
- } else {
- return 1;
+ free_safe_buffer(dev->archdata.dmabounce, buf);
}
}
@@ -396,21 +329,29 @@ static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
* substitute the safe buffer for the unsafe one.
* (basically move the buffer from an unsafe area to a safe one)
*/
-dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
- dma_addr_t dma_addr;
-
dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
__func__, ptr, size, dir);
- BUG_ON(dir == DMA_NONE);
+ BUG_ON(!valid_dma_direction(dir));
- dma_addr = map_single(dev, ptr, size, dir);
+ return map_single(dev, ptr, size, dir);
+}
+EXPORT_SYMBOL(dma_map_single);
- return dma_addr;
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size, enum dma_data_direction dir)
+{
+ dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
+ __func__, page, offset, size, dir);
+
+ BUG_ON(!valid_dma_direction(dir));
+
+ return map_single(dev, page_address(page) + offset, size, dir);
}
+EXPORT_SYMBOL(dma_map_page);
/*
* see if a mapped address was really a "safe" buffer and if so, copy
@@ -419,126 +360,76 @@ dma_map_single(struct device *dev, void *ptr, size_t size,
* should be)
*/
-void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction dir)
{
dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
__func__, (void *) dma_addr, size, dir);
- BUG_ON(dir == DMA_NONE);
-
unmap_single(dev, dma_addr, size, dir);
}
+EXPORT_SYMBOL(dma_unmap_single);
-int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
+int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
+ unsigned long off, size_t sz, enum dma_data_direction dir)
{
- int i;
-
- dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
- __func__, sg, nents, dir);
-
- BUG_ON(dir == DMA_NONE);
-
- for (i = 0; i < nents; i++, sg++) {
- struct page *page = sg_page(sg);
- unsigned int offset = sg->offset;
- unsigned int length = sg->length;
- void *ptr = page_address(page) + offset;
+ struct safe_buffer *buf;
- sg->dma_address =
- map_single(dev, ptr, length, dir);
- }
+ dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
+ __func__, addr, off, sz, dir);
- return nents;
-}
-
-void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
- int i;
+ buf = find_safe_buffer_dev(dev, addr, __func__);
+ if (!buf)
+ return 1;
- dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
- __func__, sg, nents, dir);
+ BUG_ON(buf->direction != dir);
- BUG_ON(dir == DMA_NONE);
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
- for (i = 0; i < nents; i++, sg++) {
- dma_addr_t dma_addr = sg->dma_address;
- unsigned int length = sg->length;
+ DO_STATS(dev->archdata.dmabounce->bounce_count++);
- unmap_single(dev, dma_addr, length, dir);
+ if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
+ dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
+ __func__, buf->safe + off, buf->ptr + off, sz);
+ memcpy(buf->ptr + off, buf->safe + off, sz);
}
+ return 0;
}
+EXPORT_SYMBOL(dmabounce_sync_for_cpu);
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
-{
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
- __func__, dma_addr, offset, size, dir);
-
- if (sync_single(dev, dma_addr, offset + size, dir))
- dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
-
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
-{
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
- __func__, dma_addr, offset, size, dir);
-
- if (sync_single(dev, dma_addr, offset + size, dir))
- dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_device);
-
-void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
+int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
+ unsigned long off, size_t sz, enum dma_data_direction dir)
{
- int i;
-
- dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
- __func__, sg, nents, dir);
-
- BUG_ON(dir == DMA_NONE);
+ struct safe_buffer *buf;
- for (i = 0; i < nents; i++, sg++) {
- dma_addr_t dma_addr = sg->dma_address;
- unsigned int length = sg->length;
+ dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
+ __func__, addr, off, sz, dir);
- sync_single(dev, dma_addr, length, dir);
- }
-}
-
-void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
- int i;
+ buf = find_safe_buffer_dev(dev, addr, __func__);
+ if (!buf)
+ return 1;
- dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
- __func__, sg, nents, dir);
+ BUG_ON(buf->direction != dir);
- BUG_ON(dir == DMA_NONE);
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
- for (i = 0; i < nents; i++, sg++) {
- dma_addr_t dma_addr = sg->dma_address;
- unsigned int length = sg->length;
+ DO_STATS(dev->archdata.dmabounce->bounce_count++);
- sync_single(dev, dma_addr, length, dir);
+ if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
+ dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n",
+ __func__,buf->ptr + off, buf->safe + off, sz);
+ memcpy(buf->safe + off, buf->ptr + off, sz);
}
+ return 0;
}
+EXPORT_SYMBOL(dmabounce_sync_for_device);
-static int
-dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
- unsigned long size)
+static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
+ const char *name, unsigned long size)
{
pool->size = size;
DO_STATS(pool->allocs = 0);
@@ -549,9 +440,8 @@ dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char
return pool->pool ? 0 : -ENOMEM;
}
-int
-dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
- unsigned long large_buffer_size)
+int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
+ unsigned long large_buffer_size)
{
struct dmabounce_device_info *device_info;
int ret;
@@ -607,9 +497,9 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
kfree(device_info);
return ret;
}
+EXPORT_SYMBOL(dmabounce_register_dev);
-void
-dmabounce_unregister_dev(struct device *dev)
+void dmabounce_unregister_dev(struct device *dev)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
@@ -642,15 +532,6 @@ dmabounce_unregister_dev(struct device *dev)
dev_info(dev, "dmabounce: device unregistered\n");
}
-
-
-EXPORT_SYMBOL(dma_map_single);
-EXPORT_SYMBOL(dma_unmap_single);
-EXPORT_SYMBOL(dma_map_sg);
-EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(dma_sync_sg_for_device);
-EXPORT_SYMBOL(dmabounce_register_dev);
EXPORT_SYMBOL(dmabounce_unregister_dev);
MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0c89bd35e06..7fc9860a97d 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -27,9 +27,9 @@
#include <linux/list.h>
#include <linux/smp.h>
#include <linux/cpumask.h>
+#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5fe9588db07..2793447621c 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -66,14 +66,6 @@ static void it8152_unmask_irq(unsigned int irq)
}
}
-static inline void it8152_irq(int irq)
-{
- struct irq_desc *desc;
-
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
-}
-
static struct irq_chip it8152_irq_chip = {
.name = "it8152",
.ack = it8152_mask_irq,
@@ -128,21 +120,21 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
while (bits_pd) {
i = __ffs(bits_pd);
- it8152_irq(IT8152_PD_IRQ(i));
+ generic_handle_irq(IT8152_PD_IRQ(i));
bits_pd &= ~(1 << i);
}
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
i = __ffs(bits_lp);
- it8152_irq(IT8152_LP_IRQ(i));
+ generic_handle_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
i = __ffs(bits_ld);
- it8152_irq(IT8152_LD_IRQ(i));
+ generic_handle_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
}
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 283051eaf93..7c6b4b99a2d 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -24,9 +24,9 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -169,7 +169,6 @@ static struct locomo_dev_info locomo_devices[] = {
static void locomo_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
/* Acknowledge the parent IRQ */
@@ -181,10 +180,9 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
if (req) {
/* generate the next interrupt(s) */
irq = LOCOMO_IRQ_START;
- d = irq_desc + irq;
- for (i = 0; i <= 3; i++, d++, irq++) {
+ for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0100 << i)) {
- desc_handle_irq(irq, d);
+ generic_handle_irq(irq);
}
}
@@ -222,12 +220,10 @@ static struct irq_chip locomo_chip = {
static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
{
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
- d = irq_desc + LOCOMO_IRQ_KEY_START;
- desc_handle_irq(LOCOMO_IRQ_KEY_START, d);
+ generic_handle_irq(LOCOMO_IRQ_KEY_START);
}
}
@@ -268,7 +264,6 @@ static struct irq_chip locomo_key_chip = {
static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_GIR) &
@@ -277,10 +272,9 @@ static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
if (req) {
irq = LOCOMO_IRQ_GPIO_START;
- d = irq_desc + LOCOMO_IRQ_GPIO_START;
- for (i = 0; i <= 15; i++, irq++, d++) {
+ for (i = 0; i <= 15; i++, irq++) {
if (req & (0x0001 << i)) {
- desc_handle_irq(irq, d);
+ generic_handle_irq(irq);
}
}
}
@@ -361,12 +355,10 @@ static struct irq_chip locomo_gpio_chip = {
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
{
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
- d = irq_desc + LOCOMO_IRQ_LT_START;
- desc_handle_irq(LOCOMO_IRQ_LT_START, d);
+ generic_handle_irq(LOCOMO_IRQ_LT_START);
}
}
@@ -407,17 +399,15 @@ static struct irq_chip locomo_lt_chip = {
static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
if (req) {
irq = LOCOMO_IRQ_SPI_START;
- d = irq_desc + irq;
- for (i = 0; i <= 3; i++, irq++, d++) {
+ for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0001 << i)) {
- desc_handle_irq(irq, d);
+ generic_handle_irq(irq);
}
}
}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ec8a5471bf0..fb86f248aab 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -25,10 +25,10 @@
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/sizes.h>
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index ae39553589d..697c6491399 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -15,7 +15,7 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/gpio.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index aad4d94ba8f..d56c932580e 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -12,6 +12,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <asm/mach/sharpsl_param.h>
@@ -36,6 +37,7 @@
#define PHAD_MAGIC MAGIC_CHG('P','H','A','D')
struct sharpsl_param_info sharpsl_param;
+EXPORT_SYMBOL(sharpsl_param);
void sharpsl_save_param(void)
{
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index df0983aafe6..deeed561b16 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -17,9 +17,9 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 7ecd3c0ab01..b520e56216a 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,9 +16,9 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/hardware/uengine.h>
-#include <asm/io.h>
#if defined(CONFIG_ARCH_IXP2000)
#define IXP_UENGINE_CSR_VIRT_BASE IXP2000_UENGINE_CSR_VIRT_BASE
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
index 79a8206e62a..8421d39109b 100644
--- a/arch/arm/common/via82c505.c
+++ b/arch/arm/common/via82c505.c
@@ -4,8 +4,8 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index c026fa2214a..f1e4b8f60ca 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -20,8 +20,8 @@
*/
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
new file mode 100644
index 00000000000..ce909586a34
--- /dev/null
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -0,0 +1,1259 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc2
+# Tue Aug 12 22:30:16 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+CONFIG_MACH_AFEB9260=y
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_DEBUG=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 1c76642272a..811bebbdc78 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -496,6 +496,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_INPUT_MISC is not set
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
new file mode 100644
index 00000000000..46f1c9dc350
--- /dev/null
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -0,0 +1,1466 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc3
+# Tue Aug 19 11:26:54 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-cm-x300"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=0
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 0c556289a3f..81fadafae02 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,84 +1,174 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:10:35 2005
+# Linux kernel version: 2.6.27-rc6
+# Tue Sep 16 18:56:58 2008
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_MSM7X00A is not set
+CONFIG_DMABOUNCE=y
#
# SA11x0 Implementations
@@ -91,12 +181,21 @@ CONFIG_ARCH_SA1100=y
# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
CONFIG_SA1100_JORNADA720=y
+CONFIG_SA1100_JORNADA720_SSP=y
# CONFIG_SA1100_HACKKIT is not set
# CONFIG_SA1100_LART is not set
# CONFIG_SA1100_PLEB is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
+CONFIG_SA1100_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
#
# Processor Type
@@ -105,44 +204,71 @@ CONFIG_CPU_32=y
CONFIG_CPU_SA1100=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
CONFIG_FORCE_MAX_ZONEORDER=9
#
# Bus support
#
CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
-CONFIG_I82365=y
+# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
# CONFIG_PCMCIA_SA1111 is not set
-CONFIG_PCCARD_NONSTATIC=y
#
# Kernel Features
#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_NODES_SHIFT=2
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@@ -151,8 +277,9 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd mem=32M"
+CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
# CPU Frequency scaling
@@ -174,7 +301,7 @@ CONFIG_FPE_FASTFPE=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -182,188 +309,12 @@ CONFIG_BINFMT_AOUT=m
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
@@ -371,12 +322,17 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
@@ -386,31 +342,42 @@ CONFIG_IP_MULTICAST=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -420,30 +387,22 @@ CONFIG_NETFILTER=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
@@ -468,89 +427,105 @@ CONFIG_IRCOMM=m
#
#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
# FIR device drivers
#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (1000 Mbit)
+# Wireless
#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
+# Device Drivers
#
-CONFIG_NET_RADIO=y
#
-# Obsolete Wireless cards support (pre-802.11)
+# Generic Driver Options
#
-# CONFIG_STRIP is not set
-CONFIG_ARLAN=m
-CONFIG_WAVELAN=m
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
#
-# Wireless 802.11 Frequency Hopping cards support
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
-# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
-# Wireless 802.11b ISA/PCI cards support
+# IDE chipset support/bugfixes
#
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
-# Wireless 802.11b Pcmcia/Cardbus cards support
+# SCSI device support
#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_AIRO_CS=m
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
#
-# PCMCIA network device support
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
@@ -560,32 +535,20 @@ CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -595,7 +558,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -603,20 +565,31 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HP7XX=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HP7XX=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -625,17 +598,18 @@ CONFIG_MOUSE_PS2=y
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_SA1111 is not set
-CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -652,69 +626,120 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
#
-# IPMI
+# PCMCIA character devices
#
-# CONFIG_IPMI_HANDLER is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# Watchdog Cards
+# I2C GPIO expanders:
#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
#
-# CONFIG_DRM is not set
#
-# PCMCIA character devices
+# SPI GPIO expanders:
#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# TPM devices
+# Sonics Silicon Backplane
#
-# CONFIG_TCG_TPM is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# I2C support
+# Multifunction device drivers
#
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
#
-# Misc devices
+# Multimedia Capabilities Port drivers
#
+# CONFIG_MCP_SA11X0 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_SA1100 is not set
+CONFIG_FB_S1D13XXX=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -722,94 +747,110 @@ CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# Advanced Linux Sound Architecture
+# RTC interfaces
#
-# CONFIG_SND is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# Open Sound System
+# SPI RTC drivers
#
-# CONFIG_SOUND_PRIME is not set
#
-# USB support
+# Platform RTC drivers
#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# USB Gadget Support
+# on-CPU RTC drivers
#
-# CONFIG_USB_GADGET is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
#
-# MMC/SD Card support
+# Voltage and Current regulators
#
-# CONFIG_MMC is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-CONFIG_DEVFS_DEBUG=y
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -821,75 +862,122 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=2
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -898,21 +986,100 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
#
-# Cryptographic options
+# Ciphers
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Hardware crypto devices
+# Compression
#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
new file mode 100644
index 00000000000..e042d27eae1
--- /dev/null
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -0,0 +1,1321 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Wed Oct 1 17:14:22 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
new file mode 100644
index 00000000000..948a212fb1c
--- /dev/null
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -0,0 +1,1044 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_OMAP_LDP=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 4017d83c9d2..b2456ca544c 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -176,14 +176,17 @@ CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
+CONFIG_MACH_EDMINI_V2=y
CONFIG_MACH_MSS2=y
CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
+CONFIG_MACH_RD88F6183AP_GE=y
#
# Boot options
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
new file mode 100644
index 00000000000..49200967a15
--- /dev/null
+++ b/arch/arm/configs/overo_defconfig
@@ -0,0 +1,1885 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Fri Oct 3 11:50:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_OVERO=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_93CX6=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_AU0828 is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+# CONFIG_DVB_CINERGYT2_TUNING is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
new file mode 100644
index 00000000000..3245f8f33e0
--- /dev/null
+++ b/arch/arm/configs/palmz72_defconfig
@@ -0,0 +1,951 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Sun Aug 24 02:29:27 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_ARCH_PXA_PALM=y
+# CONFIG_MACH_PALMTX is not set
+CONFIG_MACH_PALMZ72=y
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
new file mode 100644
index 00000000000..d01fecb8673
--- /dev/null
+++ b/arch/arm/configs/viper_defconfig
@@ -0,0 +1,1678 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 17:12:07 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=13
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_VIPER=y
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
+CONFIG_PXA_PWM=m
+CONFIG_PXA_HAVE_ISA_IRQS=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCMCIA_PROBE=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_PXA=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+CONFIG_MTD_SPARSE_RAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_LEGACY is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_FUJITSU=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=5
+CONFIG_SERIAL_8250_RUNTIME_UARTS=5
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=m
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_ISP116X_HCD=m
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=m
+# CONFIG_USB_PXA25X_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xm_x270_defconfig b/arch/arm/configs/xm_x2xx_defconfig
index aa40d91ce59..f891364dece 100644
--- a/arch/arm/configs/xm_x270_defconfig
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun May 11 15:12:52 2008
+# Linux kernel version: 2.6.27-rc8
+# Sun Oct 5 11:05:36 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -24,6 +25,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -62,7 +64,6 @@ CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -88,14 +89,21 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -106,6 +114,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -131,7 +140,6 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@@ -145,8 +153,11 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
@@ -164,26 +175,32 @@ CONFIG_DMABOUNCE=y
#
# Intel PXA2xx/PXA3xx Implementations
#
-
-#
-# Select target boards
-#
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
CONFIG_MACH_EM_X270=y
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
#
@@ -253,11 +270,17 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -284,9 +307,10 @@ CONFIG_CMDLINE="root=1f03 mem=32M"
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -316,10 +340,6 @@ CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -402,6 +422,7 @@ CONFIG_BT_HIDP=m
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
@@ -419,6 +440,7 @@ CONFIG_BT_HCIUSB_SCO=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -435,6 +457,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -527,6 +551,7 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
@@ -636,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
@@ -696,17 +722,21 @@ CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -725,6 +755,7 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -780,7 +811,6 @@ CONFIG_LIBERTAS_SDIO=m
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
@@ -853,17 +883,18 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -880,6 +911,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -922,45 +954,66 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
@@ -970,25 +1023,31 @@ CONFIG_I2C_PXA=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -1000,10 +1059,16 @@ CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
@@ -1014,6 +1079,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
@@ -1038,7 +1104,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -1071,12 +1136,14 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -1099,15 +1166,7 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1121,19 +1180,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -1193,42 +1248,16 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
@@ -1261,12 +1290,15 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1274,12 +1306,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1309,7 +1343,6 @@ CONFIG_USB_STORAGE=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -1322,7 +1355,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1338,6 +1370,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -1349,6 +1382,7 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
@@ -1356,14 +1390,19 @@ CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_CM_X270=y
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
@@ -1401,6 +1440,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1422,6 +1462,15 @@ CONFIG_RTC_DRV_V3020=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
@@ -1501,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1511,13 +1561,12 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1626,6 +1675,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
@@ -1633,7 +1683,17 @@ CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1689,6 +1749,10 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1729,6 +1793,7 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 7b62351f097..4d88425a416 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -12,7 +12,7 @@ extern void __bug(const char *file, int line) __attribute__((noreturn));
#else
/* this just causes an oops */
-#define BUG() (*(int *)0 = 0)
+#define BUG() do { *(int *)0 = 0; } while (1)
#endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 9073d9c6567..de6c59f814a 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -444,94 +444,4 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
dmac_inv_range(start, start + size);
}
-#define __cacheid_present(val) (val != read_cpuid(CPUID_ID))
-#define __cacheid_type_v7(val) ((val & (7 << 29)) == (4 << 29))
-
-#define __cacheid_vivt_prev7(val) ((val & (15 << 25)) != (14 << 25))
-#define __cacheid_vipt_prev7(val) ((val & (15 << 25)) == (14 << 25))
-#define __cacheid_vipt_nonaliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25))
-#define __cacheid_vipt_aliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
-
-#define __cacheid_vivt(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
-#define __cacheid_vipt(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
-#define __cacheid_vipt_nonaliasing(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
-#define __cacheid_vipt_aliasing(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
-#define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
-
-#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
-/*
- * VIVT caches only
- */
-#define cache_is_vivt() 1
-#define cache_is_vipt() 0
-#define cache_is_vipt_nonaliasing() 0
-#define cache_is_vipt_aliasing() 0
-#define icache_is_vivt_asid_tagged() 0
-
-#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
-/*
- * VIPT caches only
- */
-#define cache_is_vivt() 0
-#define cache_is_vipt() 1
-#define cache_is_vipt_nonaliasing() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_vipt_nonaliasing(__val); \
- })
-
-#define cache_is_vipt_aliasing() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_vipt_aliasing(__val); \
- })
-
-#define icache_is_vivt_asid_tagged() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_vivt_asid_tagged_instr(__val); \
- })
-
-#else
-/*
- * VIVT or VIPT caches. Note that this is unreliable since ARM926
- * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
- * There's no way to tell from the CacheType register what type (!)
- * the cache is.
- */
-#define cache_is_vivt() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- (!__cacheid_present(__val)) || __cacheid_vivt(__val); \
- })
-
-#define cache_is_vipt() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_present(__val) && __cacheid_vipt(__val); \
- })
-
-#define cache_is_vipt_nonaliasing() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_present(__val) && \
- __cacheid_vipt_nonaliasing(__val); \
- })
-
-#define cache_is_vipt_aliasing() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_present(__val) && \
- __cacheid_vipt_aliasing(__val); \
- })
-
-#define icache_is_vivt_asid_tagged() \
- ({ \
- unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
- __cacheid_present(__val) && \
- __cacheid_vivt_asid_tagged_instr(__val); \
- })
-
-#endif
-
#endif
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
new file mode 100644
index 00000000000..d3a4c2cb9f2
--- /dev/null
+++ b/arch/arm/include/asm/cachetype.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARM_CACHETYPE_H
+#define __ASM_ARM_CACHETYPE_H
+
+#define CACHEID_VIVT (1 << 0)
+#define CACHEID_VIPT_NONALIASING (1 << 1)
+#define CACHEID_VIPT_ALIASING (1 << 2)
+#define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
+#define CACHEID_ASID_TAGGED (1 << 3)
+
+extern unsigned int cacheid;
+
+#define cache_is_vivt() cacheid_is(CACHEID_VIVT)
+#define cache_is_vipt() cacheid_is(CACHEID_VIPT)
+#define cache_is_vipt_nonaliasing() cacheid_is(CACHEID_VIPT_NONALIASING)
+#define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING)
+#define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED)
+
+/*
+ * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
+ * Mask out support which will never be present on newer CPUs.
+ * - v6+ is never VIVT
+ * - v7+ VIPT never aliases
+ */
+#if __LINUX_ARM_ARCH__ >= 7
+#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED)
+#elif __LINUX_ARM_ARCH__ >= 6
+#define __CACHEID_ARCH_MIN (~CACHEID_VIVT)
+#else
+#define __CACHEID_ARCH_MIN (~0)
+#endif
+
+/*
+ * Mask out support which isn't configured
+ */
+#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
+#define __CACHEID_ALWAYS (CACHEID_VIVT)
+#define __CACHEID_NEVER (~CACHEID_VIVT)
+#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
+#define __CACHEID_ALWAYS (0)
+#define __CACHEID_NEVER (CACHEID_VIVT)
+#else
+#define __CACHEID_ALWAYS (0)
+#define __CACHEID_NEVER (0)
+#endif
+
+static inline unsigned int __attribute__((pure)) cacheid_is(unsigned int mask)
+{
+ return (__CACHEID_ALWAYS & mask) |
+ (~__CACHEID_NEVER & __CACHEID_ARCH_MIN & mask & cacheid);
+}
+
+#endif
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
new file mode 100644
index 00000000000..7b9d27e749b
--- /dev/null
+++ b/arch/arm/include/asm/cputype.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARM_CPUTYPE_H
+#define __ASM_ARM_CPUTYPE_H
+
+#include <linux/stringify.h>
+
+#define CPUID_ID 0
+#define CPUID_CACHETYPE 1
+#define CPUID_TCM 2
+#define CPUID_TLBTYPE 3
+
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant. Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline unsigned int __attribute_const__ read_cpuid_id(void)
+{
+ return read_cpuid(CPUID_ID);
+}
+
+static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
+{
+ return read_cpuid(CPUID_CACHETYPE);
+}
+
+/*
+ * Intel's XScale3 core supports some v6 features (supersections, L2)
+ * but advertises itself as v5 as it does not support the v6 ISA. For
+ * this reason, we need a way to explicitly test for this type of CPU.
+ */
+#ifndef CONFIG_CPU_XSC3
+#define cpu_is_xsc3() 0
+#else
+static inline int cpu_is_xsc3(void)
+{
+ if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+ return 1;
+
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define cpu_is_xscale() 0
+#else
+#define cpu_is_xscale() 1
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7b95d205839..1cb8602dd9d 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -104,15 +104,14 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
* Dummy noncoherent implementation. We don't provide a dma_cache_sync
* function so drivers using this API are highlighted with build warnings.
*/
-static inline void *
-dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t gfp)
{
return NULL;
}
-static inline void
-dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t handle)
+static inline void dma_free_noncoherent(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t handle)
{
}
@@ -127,8 +126,7 @@ dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
* return the CPU-viewed address, and sets @handle to be the
* device-viewed address.
*/
-extern void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
/**
* dma_free_coherent - free memory allocated by dma_alloc_coherent
@@ -143,9 +141,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
* References to memory and mappings associated with cpu_addr/handle
* during and after this call executing are illegal.
*/
-extern void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t handle);
+extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
/**
* dma_mmap_coherent - map a coherent DMA allocation into user space
@@ -159,8 +155,8 @@ dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
* into user space. The coherent DMA buffer must not be freed by the
* driver until the user space mapping has been released.
*/
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t handle, size_t size);
+int dma_mmap_coherent(struct device *, struct vm_area_struct *,
+ void *, dma_addr_t, size_t);
/**
@@ -174,14 +170,94 @@ int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
* return the CPU-viewed address, and sets @handle to be the
* device-viewed address.
*/
-extern void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *,
+ gfp_t);
#define dma_free_writecombine(dev,size,cpu_addr,handle) \
dma_free_coherent(dev,size,cpu_addr,handle)
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t handle, size_t size);
+int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
+ void *, dma_addr_t, size_t);
+
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
+ * and utilize bounce buffers as needed to work around limited DMA windows.
+ *
+ * On the SA-1111, a bug limits DMA to only certain regions of RAM.
+ * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
+ * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
+ *
+ * The following are helper functions used by the dmabounce subystem
+ *
+ */
+
+/**
+ * dmabounce_register_dev
+ *
+ * @dev: valid struct device pointer
+ * @small_buf_size: size of buffers to use with small buffer pool
+ * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ *
+ * This function should be called by low-level platform code to register
+ * a device as requireing DMA buffer bouncing. The function will allocate
+ * appropriate DMA pools for the device.
+ *
+ */
+extern int dmabounce_register_dev(struct device *, unsigned long,
+ unsigned long);
+
+/**
+ * dmabounce_unregister_dev
+ *
+ * @dev: valid struct device pointer
+ *
+ * This function should be called by low-level platform code when device
+ * that was previously registered with dmabounce_register_dev is removed
+ * from the system.
+ *
+ */
+extern void dmabounce_unregister_dev(struct device *);
+
+/**
+ * dma_needs_bounce
+ *
+ * @dev: valid struct device pointer
+ * @dma_handle: dma_handle of unbounced buffer
+ * @size: size of region being mapped
+ *
+ * Platforms that utilize the dmabounce mechanism must implement
+ * this function.
+ *
+ * The dmabounce routines call this function whenever a dma-mapping
+ * is requested to determine whether a given buffer needs to be bounced
+ * or not. The function must return 0 if the buffer is OK for
+ * DMA access and 1 if the buffer needs to be bounced.
+ *
+ */
+extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+
+/*
+ * The DMA API, implemented by dmabounce.c. See below for descriptions.
+ */
+extern dma_addr_t dma_map_single(struct device *, void *, size_t,
+ enum dma_data_direction);
+extern dma_addr_t dma_map_page(struct device *, struct page *,
+ unsigned long, size_t, enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+ enum dma_data_direction);
+
+/*
+ * Private functions
+ */
+int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long,
+ size_t, enum dma_data_direction);
+int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long,
+ size_t, enum dma_data_direction);
+#else
+#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir) (1)
+#define dmabounce_sync_for_device(dev,dma,off,sz,dir) (1)
/**
@@ -198,19 +274,16 @@ int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
* can regain ownership by calling dma_unmap_single() or
* dma_sync_single_for_cpu().
*/
-#ifndef CONFIG_DMABOUNCE
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
- enum dma_data_direction dir)
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+ size_t size, enum dma_data_direction dir)
{
+ BUG_ON(!valid_dma_direction(dir));
+
if (!arch_is_coherent())
dma_cache_maint(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
-#else
-extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
-#endif
/**
* dma_map_page - map a portion of a page for streaming DMA
@@ -224,23 +297,25 @@ extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_d
* or written back.
*
* The device owns this memory once this call has completed. The CPU
- * can regain ownership by calling dma_unmap_page() or
- * dma_sync_single_for_cpu().
+ * can regain ownership by calling dma_unmap_page().
*/
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size, enum dma_data_direction dir)
{
- return dma_map_single(dev, page_address(page) + offset, size, dir);
+ BUG_ON(!valid_dma_direction(dir));
+
+ if (!arch_is_coherent())
+ dma_cache_maint(page_address(page) + offset, size, dir);
+
+ return page_to_dma(dev, page) + offset;
}
/**
* dma_unmap_single - unmap a single buffer previously mapped
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @size: size of buffer (same as passed to dma_map_single)
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
*
* Unmap a single streaming mode DMA translation. The handle and size
* must match what was provided in the previous dma_map_single() call.
@@ -249,108 +324,34 @@ dma_map_page(struct device *dev, struct page *page,
* After this call, reads by the CPU to the buffer are guaranteed to see
* whatever the device wrote there.
*/
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
{
/* nothing to do */
}
-#else
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
-#endif
+#endif /* CONFIG_DMABOUNCE */
/**
* dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @size: size of buffer (same as passed to dma_map_page)
+ * @dir: DMA transfer direction (same as passed to dma_map_page)
*
- * Unmap a single streaming mode DMA translation. The handle and size
- * must match what was provided in the previous dma_map_single() call.
+ * Unmap a page streaming mode DMA translation. The handle and size
+ * must match what was provided in the previous dma_map_page() call.
* All other usages are undefined.
*
* After this call, reads by the CPU to the buffer are guaranteed to see
* whatever the device wrote there.
*/
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
{
dma_unmap_single(dev, handle, size, dir);
}
/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA. This is the scatter-gather version of the
- * above dma_map_single interface. Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length. They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- * DMA address/length pairs than there are SG table elements.
- * (for example via virtual mapping capabilities)
- * The routine returns the number of addr/length pairs actually
- * used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
- int i;
-
- for (i = 0; i < nents; i++, sg++) {
- char *virt;
-
- sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
- virt = sg_virt(sg);
-
- if (!arch_is_coherent())
- dma_cache_maint(virt, sg->length, dir);
- }
-
- return nents;
-}
-#else
-extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * dma_unmap_single() above.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
-
- /* nothing to do */
-}
-#else
-extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-
-/**
* dma_sync_single_range_for_cpu
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
@@ -368,145 +369,52 @@ extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_da
* must first the perform a dma_sync_for_device, and then the
* device again owns the buffer.
*/
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t handle, unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
- if (!arch_is_coherent())
- dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+ BUG_ON(!valid_dma_direction(dir));
+
+ dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
}
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t handle, unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
+ BUG_ON(!valid_dma_direction(dir));
+
+ if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
+ return;
+
if (!arch_is_coherent())
dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
-#else
-extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
-extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
-#endif
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+static inline void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t handle, size_t size, enum dma_data_direction dir)
{
dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
}
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+static inline void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t handle, size_t size, enum dma_data_direction dir)
{
dma_sync_single_range_for_device(dev, handle, 0, size, dir);
}
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
- int i;
-
- for (i = 0; i < nents; i++, sg++) {
- char *virt = sg_virt(sg);
- if (!arch_is_coherent())
- dma_cache_maint(virt, sg->length, dir);
- }
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction dir)
-{
- int i;
-
- for (i = 0; i < nents; i++, sg++) {
- char *virt = sg_virt(sg);
- if (!arch_is_coherent())
- dma_cache_maint(virt, sg->length, dir);
- }
-}
-#else
-extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
-#endif
-
-#ifdef CONFIG_DMABOUNCE
/*
- * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- *
- */
-extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
+ * The scatter list versions of the above methods.
*/
-extern void dmabounce_unregister_dev(struct device *);
+extern int dma_map_sg(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+extern void dma_unmap_sg(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
-/**
- * dma_needs_bounce
- *
- * @dev: valid struct device pointer
- * @dma_handle: dma_handle of unbounced buffer
- * @size: size of region being mapped
- *
- * Platforms that utilize the dmabounce mechanism must implement
- * this function.
- *
- * The dmabounce routines call this function whenever a dma-mapping
- * is requested to determine whether a given buffer needs to be bounced
- * or not. The function must return 0 if the buffer is OK for
- * DMA access and 1 if the buffer needs to be bounced.
- *
- */
-extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#endif /* CONFIG_DMABOUNCE */
#endif /* __KERNEL__ */
#endif
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 4ca75162748..5be016980c1 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -3,7 +3,6 @@
#include <asm/hwcap.h>
-#ifndef __ASSEMBLY__
/*
* ELF register definitions..
*/
@@ -17,12 +16,34 @@ typedef unsigned long elf_freg_t[3];
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct user_fp elf_fpregset_t;
-#endif
#define EM_ARM 40
-#define EF_ARM_APCS26 0x08
-#define EF_ARM_SOFT_FLOAT 0x200
-#define EF_ARM_EABI_MASK 0xFF000000
+
+#define EF_ARM_EABI_MASK 0xff000000
+#define EF_ARM_EABI_UNKNOWN 0x00000000
+#define EF_ARM_EABI_VER1 0x01000000
+#define EF_ARM_EABI_VER2 0x02000000
+#define EF_ARM_EABI_VER3 0x03000000
+#define EF_ARM_EABI_VER4 0x04000000
+#define EF_ARM_EABI_VER5 0x05000000
+
+#define EF_ARM_BE8 0x00800000 /* ABI 4,5 */
+#define EF_ARM_LE8 0x00400000 /* ABI 4,5 */
+#define EF_ARM_MAVERICK_FLOAT 0x00000800 /* ABI 0 */
+#define EF_ARM_VFP_FLOAT 0x00000400 /* ABI 0 */
+#define EF_ARM_SOFT_FLOAT 0x00000200 /* ABI 0 */
+#define EF_ARM_OLD_ABI 0x00000100 /* ABI 0 */
+#define EF_ARM_NEW_ABI 0x00000080 /* ABI 0 */
+#define EF_ARM_ALIGN8 0x00000040 /* ABI 0 */
+#define EF_ARM_PIC 0x00000020 /* ABI 0 */
+#define EF_ARM_MAPSYMSFIRST 0x00000010 /* ABI 2 */
+#define EF_ARM_APCS_FLOAT 0x00000010 /* ABI 0, floats in fp regs */
+#define EF_ARM_DYNSYMSUSESEGIDX 0x00000008 /* ABI 2 */
+#define EF_ARM_APCS_26 0x00000008 /* ABI 0 */
+#define EF_ARM_SYMSARESORTED 0x00000004 /* ABI 1,2 */
+#define EF_ARM_INTERWORK 0x00000004 /* ABI 0 */
+#define EF_ARM_HASENTRY 0x00000002 /* All */
+#define EF_ARM_RELEXEC 0x00000001 /* All */
#define R_ARM_NONE 0
#define R_ARM_PC24 1
@@ -41,7 +62,6 @@ typedef struct user_fp elf_fpregset_t;
#endif
#define ELF_ARCH EM_ARM
-#ifndef __ASSEMBLY__
/*
* This yields a string that ld.so will use to load implementation
* specific libraries for optimization. This is more specific in
@@ -59,25 +79,17 @@ typedef struct user_fp elf_fpregset_t;
#define ELF_PLATFORM (elf_platform)
extern char elf_platform[];
-#endif
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
+struct elf32_hdr;
/*
- * 32-bit code is always OK. Some cpus can do 26-bit, some can't.
+ * This is used to ensure we don't load something for the wrong architecture.
*/
-#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
-
-#define ELF_THUMB_OK(x) \
- ((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
- ((x)->e_entry & 3) == 0)
+extern int elf_check_arch(const struct elf32_hdr *);
+#define elf_check_arch elf_check_arch
-#define ELF_26BIT_OK(x) \
- ((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
- ((x)->e_flags & EF_ARM_APCS26) == 0)
+extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
+#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
@@ -94,23 +106,7 @@ extern char elf_platform[];
have no such handler. */
#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
-/*
- * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
- * and CP1, we only enable access to the iWMMXt coprocessor if the
- * binary is EABI or softfloat (and thus, guaranteed not to use
- * FPA instructions.)
- */
-#define SET_PERSONALITY(ex, ibcs2) \
- do { \
- if ((ex).e_flags & EF_ARM_APCS26) { \
- set_personality(PER_LINUX); \
- } else { \
- set_personality(PER_LINUX_32BIT); \
- if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
- set_thread_flag(TIF_USING_IWMMXT); \
- else \
- clear_thread_flag(TIF_USING_IWMMXT); \
- } \
- } while (0)
+extern void elf_set_personality(const struct elf32_hdr *);
+#define SET_PERSONALITY(ex, ibcs2) elf_set_personality(&(ex))
#endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 6a332a9f099..9ee743b95de 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -1,6 +1,124 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ARM_FUTEX_H
+#define _ASM_ARM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SMP
#include <asm-generic/futex.h>
-#endif
+#else /* !SMP, we can work around lack of atomic ops by disabling preemption */
+
+#include <linux/futex.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ "1: ldrt %1, [%2]\n" \
+ " " insn "\n" \
+ "2: strt %0, [%2]\n" \
+ " mov %0, #0\n" \
+ "3:\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 4f, 2b, 4f\n" \
+ " .previous\n" \
+ " .section .fixup,\"ax\"\n" \
+ "4: mov %0, %4\n" \
+ " b 3b\n" \
+ " .previous" \
+ : "=&r" (ret), "=&r" (oldval) \
+ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
+ : "cc", "memory")
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable(); /* implies preempt_disable() */
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable(); /* subsumes preempt_enable() */
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int val;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable(); /* implies preempt_disable() */
+
+ __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+ "1: ldrt %0, [%3]\n"
+ " teq %0, %1\n"
+ "2: streqt %2, [%3]\n"
+ "3:\n"
+ " .section __ex_table,\"a\"\n"
+ " .align 3\n"
+ " .long 1b, 4f, 2b, 4f\n"
+ " .previous\n"
+ " .section .fixup,\"ax\"\n"
+ "4: mov %0, %4\n"
+ " b 3b\n"
+ " .previous"
+ : "=&r" (val)
+ : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+ : "cc", "memory");
+
+ pagefault_enable(); /* subsumes preempt_enable() */
+
+ return val;
+}
+
+#endif /* !SMP */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ARM_FUTEX_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 71934856fc2..a8094451be5 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -60,10 +60,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
#define MT_DEVICE 0
#define MT_DEVICE_NONSHARED 1
#define MT_DEVICE_CACHED 2
-#define MT_DEVICE_IXP2000 3
-#define MT_DEVICE_WC 4
+#define MT_DEVICE_WC 3
/*
- * types 5 onwards can be found in asm/mach/map.h and are undefined
+ * types 4 onwards can be found in asm/mach/map.h and are undefined
* for ioremap
*/
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index d6786090d02..a0009aa5d15 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -22,6 +22,10 @@
#ifndef __ASSEMBLY__
struct irqaction;
extern void migrate_irqs(void);
+
+extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+void init_IRQ(void);
+
#endif
#endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index a5d0d99ad38..bb8a19bd582 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -61,7 +61,6 @@ struct kprobe_ctlblk {
void arch_remove_kprobe(struct kprobe *);
void kretprobe_trampoline(void);
-int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 9eb936e49cc..cb1139ac194 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -18,16 +18,13 @@ struct map_desc {
unsigned int type;
};
-/* types 0-4 are defined in asm/io.h */
-#define MT_CACHECLEAN 5
-#define MT_MINICLEAN 6
-#define MT_LOW_VECTORS 7
-#define MT_HIGH_VECTORS 8
-#define MT_MEMORY 9
-#define MT_ROM 10
-
-#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED
-#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000
+/* types 0-3 are defined in asm/io.h */
+#define MT_CACHECLEAN 4
+#define MT_MINICLEAN 5
+#define MT_LOW_VECTORS 6
+#define MT_HIGH_VECTORS 7
+#define MT_MEMORY 8
+#define MT_ROM 9
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 270902c353f..f3eabf1ecec 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -18,8 +18,7 @@ struct pxa2xx_udc_mach_info {
/* Boards following the design guidelines in the developer's manual,
* with on-chip GPIOs not Lubbock's weird hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
- * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
- * Note that sometimes the signals go through inverters...
+ * here. Note that sometimes the signals go through inverters...
*/
bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
index e1ca48a9e97..6b884d2b0b6 100644
--- a/arch/arm/include/asm/mc146818rtc.h
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -4,8 +4,8 @@
#ifndef _ASM_MC146818RTC_H
#define _ASM_MC146818RTC_H
+#include <linux/io.h>
#include <mach/irqs.h>
-#include <asm/io.h>
#ifndef RTC_PORT
#define RTC_PORT(x) (0x70 + (x))
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index bf7c737c922..809ff9ab853 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -13,30 +13,27 @@
#ifndef __ASM_ARM_MEMORY_H
#define __ASM_ARM_MEMORY_H
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <mach/memory.h>
+#include <asm/sizes.h>
+
/*
* Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation.
*/
-#ifndef __ASSEMBLY__
-#define UL(x) (x##UL)
-#else
-#define UL(x) (x)
-#endif
-
-#include <linux/compiler.h>
-#include <mach/memory.h>
-#include <asm/sizes.h>
+#define UL(x) _AC(x, UL)
#ifdef CONFIG_MMU
-#ifndef TASK_SIZE
/*
+ * PAGE_OFFSET - the virtual address of the start of the kernel image
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
-#define TASK_SIZE UL(0xbf000000)
-#define TASK_UNMAPPED_BASE UL(0x40000000)
-#endif
+#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
+#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
+#define TASK_UNMAPPED_BASE (UL(CONFIG_PAGE_OFFSET) / 3)
/*
* The maximum size of a 26-bit user space task.
@@ -44,13 +41,6 @@
#define TASK_SIZE_26 UL(0x04000000)
/*
- * Page offset: 3GB
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET UL(0xc0000000)
-#endif
-
-/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
@@ -147,17 +137,11 @@
#ifndef arch_adjust_zones
#define arch_adjust_zones(node,size,holes) do { } while (0)
+#elif !defined(CONFIG_ZONE_DMA)
+#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
#endif
/*
- * Amount of memory reserved for the vmalloc() area, and minimum
- * address for vmalloc mappings.
- */
-extern unsigned long vmalloc_reserve;
-
-#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
-
-/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
*
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a301e446007..0559f37c2a2 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -15,6 +15,7 @@
#include <linux/compiler.h>
#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
#include <asm/proc-fns.h>
#include <asm-generic/mm_hooks.h>
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index cf2e2680daa..bed1c0a0036 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -184,8 +184,9 @@ typedef struct page *pgtable_t;
#endif /* !__ASSEMBLY__ */
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS \
+ (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+ VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
/*
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8e21ef15bd7..110295c5461 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -164,14 +164,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define L_PTE_PRESENT (1 << 0)
#define L_PTE_FILE (1 << 1) /* only when !PRESENT */
#define L_PTE_YOUNG (1 << 1)
-#define L_PTE_BUFFERABLE (1 << 2) /* matches PTE */
-#define L_PTE_CACHEABLE (1 << 3) /* matches PTE */
-#define L_PTE_USER (1 << 4)
-#define L_PTE_WRITE (1 << 5)
-#define L_PTE_EXEC (1 << 6)
-#define L_PTE_DIRTY (1 << 7)
+#define L_PTE_BUFFERABLE (1 << 2) /* obsolete, matches PTE */
+#define L_PTE_CACHEABLE (1 << 3) /* obsolete, matches PTE */
+#define L_PTE_DIRTY (1 << 6)
+#define L_PTE_WRITE (1 << 7)
+#define L_PTE_USER (1 << 8)
+#define L_PTE_EXEC (1 << 9)
#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */
+/*
+ * These are the memory types, defined to be compatible with
+ * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB
+ */
+#define L_PTE_MT_UNCACHED (0x00 << 2) /* 0000 */
+#define L_PTE_MT_BUFFERABLE (0x01 << 2) /* 0001 */
+#define L_PTE_MT_WRITETHROUGH (0x02 << 2) /* 0010 */
+#define L_PTE_MT_WRITEBACK (0x03 << 2) /* 0011 */
+#define L_PTE_MT_MINICACHE (0x06 << 2) /* 0110 (sa1100, xscale) */
+#define L_PTE_MT_WRITEALLOC (0x07 << 2) /* 0111 */
+#define L_PTE_MT_DEV_SHARED (0x04 << 2) /* 0100 */
+#define L_PTE_MT_DEV_NONSHARED (0x0c << 2) /* 1100 */
+#define L_PTE_MT_DEV_WC (0x09 << 2) /* 1001 */
+#define L_PTE_MT_DEV_CACHED (0x0b << 2) /* 1011 */
+#define L_PTE_MT_MASK (0x0f << 2)
+
#ifndef __ASSEMBLY__
/*
@@ -180,23 +196,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
* as well as any architecture dependent bits like global/ASID and SMP
* shared mapping bits.
*/
-#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
-#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC
+#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG
extern pgprot_t pgprot_user;
extern pgprot_t pgprot_kernel;
-#define PAGE_NONE pgprot_user
-#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
- L_PTE_WRITE)
-#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_KERNEL pgprot_kernel
-
-#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT)
-#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
-#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
+
+#define PAGE_NONE pgprot_user
+#define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE)
+#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
+#define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER)
+#define PAGE_COPY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
+#define PAGE_READONLY _MOD_PROT(pgprot_user, L_PTE_USER)
+#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
+#define PAGE_KERNEL pgprot_kernel
+#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_kernel, L_PTE_EXEC)
+
+#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT)
+#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE)
+#define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
+#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
+#define __PAGE_COPY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
+#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
+#define __PAGE_READONLY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
#endif /* __ASSEMBLY__ */
@@ -212,19 +235,19 @@ extern pgprot_t pgprot_kernel;
#define __P001 __PAGE_READONLY
#define __P010 __PAGE_COPY
#define __P011 __PAGE_COPY
-#define __P100 __PAGE_READONLY
-#define __P101 __PAGE_READONLY
-#define __P110 __PAGE_COPY
-#define __P111 __PAGE_COPY
+#define __P100 __PAGE_READONLY_EXEC
+#define __P101 __PAGE_READONLY_EXEC
+#define __P110 __PAGE_COPY_EXEC
+#define __P111 __PAGE_COPY_EXEC
#define __S000 __PAGE_NONE
#define __S001 __PAGE_READONLY
#define __S010 __PAGE_SHARED
#define __S011 __PAGE_SHARED
-#define __S100 __PAGE_READONLY
-#define __S101 __PAGE_READONLY
-#define __S110 __PAGE_SHARED
-#define __S111 __PAGE_SHARED
+#define __S100 __PAGE_READONLY_EXEC
+#define __S101 __PAGE_READONLY_EXEC
+#define __S110 __PAGE_SHARED_EXEC
+#define __S111 __PAGE_SHARED_EXEC
#ifndef __ASSEMBLY__
/*
@@ -286,8 +309,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
/*
* Mark the prot value as uncacheable and unbufferable.
*/
-#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
+#define pgprot_noncached(prot) \
+ __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+#define pgprot_writecombine(prot) \
+ __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))
@@ -320,11 +345,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
/*
- * Permanent address of a page. We never have highmem, so this is trivial.
- */
-#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
-
-/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index b415c0e8545..73192618f1c 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -54,7 +54,6 @@
#define PSR_C_BIT 0x20000000
#define PSR_Z_BIT 0x40000000
#define PSR_N_BIT 0x80000000
-#define PCMASK 0
/*
* Groups of PSR bits
@@ -139,11 +138,7 @@ static inline int valid_user_regs(struct pt_regs *regs)
return 0;
}
-#define pc_pointer(v) \
- ((v) & ~PCMASK)
-
-#define instruction_pointer(regs) \
- (pc_pointer((regs)->ARM_pc))
+#define instruction_pointer(regs) (regs)->ARM_pc
#ifdef CONFIG_SMP
extern unsigned long profile_pc(struct pt_regs *regs);
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 7bbf105463f..a65413ba121 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -209,6 +209,17 @@ struct meminfo {
struct membank bank[NR_BANKS];
};
+#define for_each_nodebank(iter,mi,no) \
+ for (iter = 0; iter < mi->nr_banks; iter++) \
+ if (mi->bank[iter].node == no)
+
+#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
+#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
+#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT)
+#define bank_phys_start(bank) (bank)->start
+#define bank_phys_end(bank) ((bank)->start + (bank)->size)
+#define bank_phys_size(bank) (bank)->size
+
/*
* Early command line parameters.
*/
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 277158191a0..00098615c6f 100644
--- a/arch/arm/include/asm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
@@ -3,8 +3,22 @@
#include <asm/memory.h>
-#define MAX_PHYSADDR_BITS 32
-#define MAX_PHYSMEM_BITS 32
-#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS
+/*
+ * Two definitions are required for sparsemem:
+ *
+ * MAX_PHYSMEM_BITS: The number of physical address bits required
+ * to address the last byte of memory.
+ *
+ * SECTION_SIZE_BITS: The number of physical address bits to cover
+ * the maximum amount of memory in a section.
+ *
+ * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
+ * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
+ *
+ * Define these in your mach/memory.h.
+ */
+#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
+#error Sparsemem is not supported on this platform
+#endif
#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 514af792a59..7aad78420f1 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -43,11 +43,6 @@
#define CR_XP (1 << 23) /* Extended page tables */
#define CR_VE (1 << 24) /* Vectored interrupts */
-#define CPUID_ID 0
-#define CPUID_CACHETYPE 1
-#define CPUID_TCM 2
-#define CPUID_TLBTYPE 3
-
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@@ -61,36 +56,8 @@
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
-#include <linux/stringify.h>
#include <linux/irqflags.h>
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg) \
- ({ \
- unsigned int __val; \
- asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
- : "=r" (__val) \
- : \
- : "cc"); \
- __val; \
- })
-#else
-extern unsigned int processor_id;
-#define read_cpuid(reg) (processor_id)
-#endif
-
-/*
- * The CPU ID never changes at run time, so we might as well tell the
- * compiler that it's constant. Use this function to read the CPU ID
- * rather than directly reading processor_id or read_cpuid() directly.
- */
-static inline unsigned int read_cpuid_id(void) __attribute_const__;
-
-static inline unsigned int read_cpuid_id(void)
-{
- return read_cpuid(CPUID_ID);
-}
-
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
@@ -131,31 +98,6 @@ extern void cpu_init(void);
void arm_machine_restart(char mode);
extern void (*arm_pm_restart)(char str);
-/*
- * Intel's XScale3 core supports some v6 features (supersections, L2)
- * but advertises itself as v5 as it does not support the v6 ISA. For
- * this reason, we need a way to explicitly test for this type of CPU.
- */
-#ifndef CONFIG_CPU_XSC3
-#define cpu_is_xsc3() 0
-#else
-static inline int cpu_is_xsc3(void)
-{
- extern unsigned int processor_id;
-
- if ((processor_id & 0xffffe000) == 0x69056000)
- return 1;
-
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define cpu_is_xscale() 0
-#else
-#define cpu_is_xscale() 1
-#endif
-
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define UDBG_BADABORT (1 << 2)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index e56fa48e4ae..68b9ec82a37 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -98,7 +98,7 @@ static inline struct thread_info *current_thread_info(void)
}
#define thread_saved_pc(tsk) \
- ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index d0f51ff900b..e98ec60b340 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -225,7 +225,7 @@ do { \
#define __get_user_asm_byte(x,addr,err) \
__asm__ __volatile__( \
- "1: ldrbt %1,[%2],#0\n" \
+ "1: ldrbt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -261,7 +261,7 @@ do { \
#define __get_user_asm_word(x,addr,err) \
__asm__ __volatile__( \
- "1: ldrt %1,[%2],#0\n" \
+ "1: ldrt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -306,7 +306,7 @@ do { \
#define __put_user_asm_byte(x,__pu_addr,err) \
__asm__ __volatile__( \
- "1: strbt %1,[%2],#0\n" \
+ "1: strbt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -339,7 +339,7 @@ do { \
#define __put_user_asm_word(x,__pu_addr,err) \
__asm__ __volatile__( \
- "1: strt %1,[%2],#0\n" \
+ "1: strt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -365,7 +365,7 @@ do { \
#define __put_user_asm_dword(x,__pu_addr,err) \
__asm__ __volatile__( \
"1: strt " __reg_oper1 ", [%1], #4\n" \
- "2: strt " __reg_oper0 ", [%1], #0\n" \
+ "2: strt " __reg_oper0 ", [%1]\n" \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
index 6a3cd2a2f67..250a4dd0063 100644
--- a/arch/arm/include/asm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -1,8 +1,8 @@
#ifndef ASMARM_VGA_H
#define ASMARM_VGA_H
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x))
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1d296fc8494..4305345987d 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -10,7 +10,7 @@ endif
# Object file lists.
-obj-y := compat.o entry-armv.o entry-common.o irq.o \
+obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index cc7b246e965..2357b1cf1cf 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -13,11 +13,11 @@
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <asm/checksum.h>
-#include <asm/io.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
#include <asm/ftrace.h>
/*
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index e5747547b44..17a59b6e521 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -10,8 +10,8 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 3b6a1c293ee..99995c2b231 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,9 +15,9 @@
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/ep93xx-regs.h>
#include <asm/thread_notify.h>
-#include <asm/io.h>
struct crunch_state *crunch_owner;
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 9550ff0ddde..f53c5829054 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -89,10 +89,12 @@
ENTRY(printhex8)
mov r1, #8
b printhex
+ENDPROC(printhex8)
ENTRY(printhex4)
mov r1, #4
b printhex
+ENDPROC(printhex4)
ENTRY(printhex2)
mov r1, #2
@@ -110,6 +112,7 @@ printhex: adr r2, hexbuf
bne 1b
mov r0, r2
b printascii
+ENDPROC(printhex2)
.ltorg
@@ -127,11 +130,13 @@ ENTRY(printascii)
teqne r1, #0
bne 1b
mov pc, lr
+ENDPROC(printascii)
ENTRY(printch)
addruart r3
mov r1, r0
mov r0, #0
b 1b
+ENDPROC(printch)
hexbuf: .space 16
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 2f080a35a2d..4a3a50495c6 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -19,10 +19,9 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <asm/dma.h>
-#include <asm/io.h>
-
#include <asm/mach/dma.h>
#define ISA_DMA_MODE_READ 0x44
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 7a50575a8d4..60c079d8535 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -587,8 +587,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
pending = ecard_default_ops.irqpending(ec);
if (pending) {
- struct irq_desc *d = irq_desc + ec->irq;
- desc_handle_irq(ec->irq, d);
+ generic_handle_irq(ec->irq);
called ++;
}
}
@@ -622,7 +621,6 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
ecard_t *ec = slot_to_ecard(slot);
if (ec->claimed) {
- struct irq_desc *d = irq_desc + ec->irq;
/*
* this ugly code is so that we can operate a
* prioritorising system:
@@ -635,7 +633,7 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
* Serial cards should go in 0/1, ethernet/scsi in 2/3
* otherwise you will lose serial data at high speeds!
*/
- desc_handle_irq(ec->irq, d);
+ generic_handle_irq(ec->irq);
} else {
printk(KERN_WARNING "card%d: interrupt from unclaimed "
"card???\n", slot);
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
new file mode 100644
index 00000000000..513f332f040
--- /dev/null
+++ b/arch/arm/kernel/elf.c
@@ -0,0 +1,79 @@
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+
+int elf_check_arch(const struct elf32_hdr *x)
+{
+ unsigned int eflags;
+
+ /* Make sure it's an ARM executable */
+ if (x->e_machine != EM_ARM)
+ return 0;
+
+ /* Make sure the entry address is reasonable */
+ if (x->e_entry & 1) {
+ if (!(elf_hwcap & HWCAP_THUMB))
+ return 0;
+ } else if (x->e_entry & 3)
+ return 0;
+
+ eflags = x->e_flags;
+ if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
+ /* APCS26 is only allowed if the CPU supports it */
+ if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT))
+ return 0;
+
+ /* VFP requires the supporting code */
+ if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP))
+ return 0;
+ }
+ return 1;
+}
+EXPORT_SYMBOL(elf_check_arch);
+
+void elf_set_personality(const struct elf32_hdr *x)
+{
+ unsigned int eflags = x->e_flags;
+ unsigned int personality = PER_LINUX_32BIT;
+
+ /*
+ * APCS-26 is only valid for OABI executables
+ */
+ if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
+ if (eflags & EF_ARM_APCS_26)
+ personality = PER_LINUX;
+ }
+
+ set_personality(personality);
+
+ /*
+ * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
+ * and CP1, we only enable access to the iWMMXt coprocessor if the
+ * binary is EABI or softfloat (and thus, guaranteed not to use
+ * FPA instructions.)
+ */
+ if (elf_hwcap & HWCAP_IWMMXT &&
+ eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
+ set_thread_flag(TIF_USING_IWMMXT);
+ } else {
+ clear_thread_flag(TIF_USING_IWMMXT);
+ }
+}
+EXPORT_SYMBOL(elf_set_personality);
+
+/*
+ * Set READ_IMPLIES_EXEC if:
+ * - the binary requires an executable stack
+ * - we're running on a CPU which doesn't support NX.
+ */
+int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
+{
+ if (executable_stack != EXSTACK_ENABLE_X)
+ return 1;
+ if (cpu_architecture() <= CPU_ARCH_ARMv6)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 617e509d60d..77b04747553 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -76,14 +76,17 @@
__pabt_invalid:
inv_entry BAD_PREFETCH
b common_invalid
+ENDPROC(__pabt_invalid)
__dabt_invalid:
inv_entry BAD_DATA
b common_invalid
+ENDPROC(__dabt_invalid)
__irq_invalid:
inv_entry BAD_IRQ
b common_invalid
+ENDPROC(__irq_invalid)
__und_invalid:
inv_entry BAD_UNDEFINSTR
@@ -107,6 +110,7 @@ common_invalid:
mov r0, sp
b bad_mode
+ENDPROC(__und_invalid)
/*
* SVC mode handlers
@@ -192,6 +196,7 @@ __dabt_svc:
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ENDPROC(__dabt_svc)
.align 5
__irq_svc:
@@ -223,6 +228,7 @@ __irq_svc:
bleq trace_hardirqs_on
#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ENDPROC(__irq_svc)
.ltorg
@@ -272,6 +278,7 @@ __und_svc:
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ENDPROC(__und_svc)
.align 5
__pabt_svc:
@@ -313,6 +320,7 @@ __pabt_svc:
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ENDPROC(__pabt_svc)
.align 5
.LCcralign:
@@ -412,6 +420,7 @@ __dabt_usr:
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
+ENDPROC(__dabt_usr)
.align 5
__irq_usr:
@@ -441,6 +450,7 @@ __irq_usr:
mov why, #0
b ret_to_user
+ENDPROC(__irq_usr)
.ltorg
@@ -474,6 +484,7 @@ __und_usr:
#else
b __und_usr_unknown
#endif
+ENDPROC(__und_usr)
@
@ fallthrough to call_fpe
@@ -642,6 +653,7 @@ __und_usr_unknown:
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
+ENDPROC(__und_usr_unknown)
.align 5
__pabt_usr:
@@ -666,6 +678,8 @@ ENTRY(ret_from_exception)
get_thread_info tsk
mov why, #0
b ret_to_user
+ENDPROC(__pabt_usr)
+ENDPROC(ret_from_exception)
/*
* Register switch for ARMv3 and ARMv4 processors
@@ -702,6 +716,7 @@ ENTRY(__switch_to)
bl atomic_notifier_call_chain
mov r0, r5
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ENDPROC(__switch_to)
__INIT
@@ -1029,6 +1044,7 @@ vector_\name:
mov r0, sp
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ branch to handler in SVC mode
+ENDPROC(vector_\name)
.endm
.globl __stubs_start
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 060d7e2e9f6..3aa14dcc5ba 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -77,6 +77,7 @@ no_work_pending:
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
+ENDPROC(ret_to_user)
/*
* This is how we return from a fork.
@@ -92,7 +93,7 @@ ENTRY(ret_from_fork)
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
-
+ENDPROC(ret_from_fork)
.equ NR_syscalls,0
#define CALL(x) .equ NR_syscalls,NR_syscalls+1
@@ -269,6 +270,7 @@ ENTRY(vector_swi)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
+ENDPROC(vector_swi)
/*
* This is the really slow path. We're going to be doing
@@ -326,7 +328,6 @@ ENTRY(sys_call_table)
*/
@ r0 = syscall number
@ r8 = syscall table
- .type sys_syscall, #function
sys_syscall:
bic scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
@@ -338,53 +339,65 @@ sys_syscall:
movlo r3, r4
ldrlo pc, [tbl, scno, lsl #2]
b sys_ni_syscall
+ENDPROC(sys_syscall)
sys_fork_wrapper:
add r0, sp, #S_OFF
b sys_fork
+ENDPROC(sys_fork_wrapper)
sys_vfork_wrapper:
add r0, sp, #S_OFF
b sys_vfork
+ENDPROC(sys_vfork_wrapper)
sys_execve_wrapper:
add r3, sp, #S_OFF
b sys_execve
+ENDPROC(sys_execve_wrapper)
sys_clone_wrapper:
add ip, sp, #S_OFF
str ip, [sp, #4]
b sys_clone
+ENDPROC(sys_clone_wrapper)
sys_sigsuspend_wrapper:
add r3, sp, #S_OFF
b sys_sigsuspend
+ENDPROC(sys_sigsuspend_wrapper)
sys_rt_sigsuspend_wrapper:
add r2, sp, #S_OFF
b sys_rt_sigsuspend
+ENDPROC(sys_rt_sigsuspend_wrapper)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
+ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_rt_sigreturn
+ENDPROC(sys_rt_sigreturn_wrapper)
sys_sigaltstack_wrapper:
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
+ENDPROC(sys_sigaltstack_wrapper)
sys_statfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_statfs64
+ENDPROC(sys_statfs64_wrapper)
sys_fstatfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_fstatfs64
+ENDPROC(sys_fstatfs64_wrapper)
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
@@ -402,11 +415,14 @@ sys_mmap2:
str r5, [sp, #4]
b do_mmap2
#endif
+ENDPROC(sys_mmap2)
ENTRY(pabort_ifar)
mrc p15, 0, r0, cr6, cr0, 2
ENTRY(pabort_noifar)
mov pc, lr
+ENDPROC(pabort_ifar)
+ENDPROC(pabort_noifar)
#ifdef CONFIG_OABI_COMPAT
@@ -417,26 +433,31 @@ ENTRY(pabort_noifar)
sys_oabi_pread64:
stmia sp, {r3, r4}
b sys_pread64
+ENDPROC(sys_oabi_pread64)
sys_oabi_pwrite64:
stmia sp, {r3, r4}
b sys_pwrite64
+ENDPROC(sys_oabi_pwrite64)
sys_oabi_truncate64:
mov r3, r2
mov r2, r1
b sys_truncate64
+ENDPROC(sys_oabi_truncate64)
sys_oabi_ftruncate64:
mov r3, r2
mov r2, r1
b sys_ftruncate64
+ENDPROC(sys_oabi_ftruncate64)
sys_oabi_readahead:
str r3, [sp]
mov r3, r2
mov r2, r1
b sys_readahead
+ENDPROC(sys_oabi_readahead)
/*
* Let's declare a second syscall table for old ABI binaries
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index e8e90346f11..36f81d96797 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -45,7 +45,6 @@
#include <asm/fiq.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
static unsigned long no_fiq_insn;
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 1c3c6ea5f9e..bde52df1c66 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -36,7 +36,6 @@ __switch_data:
* r2 = atags pointer
* r9 = processor ID
*/
- .type __mmap_switched, %function
__mmap_switched:
adr r3, __switch_data + 4
@@ -59,6 +58,7 @@ __mmap_switched:
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r7, {r0, r4} @ Save control register values
b start_kernel
+ENDPROC(__mmap_switched)
/*
* Exception handling. Something went wrong and we can't proceed. We
@@ -69,8 +69,6 @@ __mmap_switched:
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
-
- .type __error_p, %function
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
@@ -84,8 +82,8 @@ str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x"
str_p2: .asciz ").\n"
.align
#endif
+ENDPROC(__error_p)
- .type __error_a, %function
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
@@ -115,13 +113,14 @@ __error_a:
adr r0, str_a3
bl printascii
b __error
+ENDPROC(__error_a)
+
str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
.align
#endif
- .type __error, %function
__error:
#ifdef CONFIG_ARCH_RPC
/*
@@ -138,6 +137,7 @@ __error:
#endif
1: mov r0, r0
b 1b
+ENDPROC(__error)
/*
@@ -153,7 +153,6 @@ __error:
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
- .type __lookup_processor_type, %function
__lookup_processor_type:
adr r3, 3f
ldmda r3, {r5 - r7}
@@ -169,6 +168,7 @@ __lookup_processor_type:
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
+ENDPROC(__lookup_processor_type)
/*
* This provides a C-API version of the above function.
@@ -179,6 +179,7 @@ ENTRY(lookup_processor_type)
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r7, r9, pc}
+ENDPROC(lookup_processor_type)
/*
* Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
@@ -201,7 +202,6 @@ ENTRY(lookup_processor_type)
* r3, r4, r6 corrupted
* r5 = mach_info pointer in physical address space
*/
- .type __lookup_machine_type, %function
__lookup_machine_type:
adr r3, 3b
ldmia r3, {r4, r5, r6}
@@ -216,6 +216,7 @@ __lookup_machine_type:
blo 1b
mov r5, #0 @ unknown machine
2: mov pc, lr
+ENDPROC(__lookup_machine_type)
/*
* This provides a C-API version of the above function.
@@ -226,6 +227,7 @@ ENTRY(lookup_machine_type)
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
+ENDPROC(lookup_machine_type)
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
@@ -239,8 +241,6 @@ ENTRY(lookup_machine_type)
* r2 either valid atags pointer, or zero
* r5, r6 corrupted
*/
-
- .type __vet_atags, %function
__vet_atags:
tst r2, #0x3 @ aligned?
bne 1f
@@ -257,3 +257,4 @@ __vet_atags:
1: mov r2, #0
mov pc, lr
+ENDPROC(__vet_atags)
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 27329bd3203..cc87e1765ed 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -33,7 +33,6 @@
*
*/
.section ".text.head", "ax"
- .type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
@@ -53,11 +52,11 @@ ENTRY(stext)
@ the initialization is done
adr lr, __after_proc_init @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
+ENDPROC(stext)
/*
* Set the Control Register and Read the process ID.
*/
- .type __after_proc_init, %function
__after_proc_init:
#ifdef CONFIG_CPU_CP15
mrc p15, 0, r0, c1, c0, 0 @ read control reg
@@ -85,6 +84,7 @@ __after_proc_init:
mov pc, r13 @ clear the BSS and jump
@ to start_kernel
+ENDPROC(__after_proc_init)
.ltorg
#include "head-common.S"
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index bff4c6e90dd..21e17dc94cb 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -75,7 +75,6 @@
* circumstances, zImage) is for.
*/
.section ".text.head", "ax"
- .type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
@@ -100,9 +99,9 @@ ENTRY(stext)
@ mmu has been enabled
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
+ENDPROC(stext)
#if defined(CONFIG_SMP)
- .type secondary_startup, #function
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
@@ -128,6 +127,7 @@ ENTRY(secondary_startup)
adr lr, __enable_mmu @ return address
add pc, r10, #PROCINFO_INITFUNC @ initialise processor
@ (return control reg)
+ENDPROC(secondary_startup)
/*
* r6 = &secondary_data
@@ -136,6 +136,7 @@ ENTRY(__secondary_switched)
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
+ENDPROC(__secondary_switched)
.type __secondary_data, %object
__secondary_data:
@@ -151,7 +152,6 @@ __secondary_data:
* this is just loading the page table pointer and domain access
* registers.
*/
- .type __enable_mmu, %function
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
@@ -174,6 +174,7 @@ __enable_mmu:
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
b __turn_mmu_on
+ENDPROC(__enable_mmu)
/*
* Enable the MMU. This completely changes the structure of the visible
@@ -187,7 +188,6 @@ __enable_mmu:
* other registers depend on the function called upon completion
*/
.align 5
- .type __turn_mmu_on, %function
__turn_mmu_on:
mov r0, r0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
@@ -195,7 +195,7 @@ __turn_mmu_on:
mov r3, r3
mov r3, r3
mov pc, r13
-
+ENDPROC(__turn_mmu_on)
/*
@@ -211,7 +211,6 @@ __turn_mmu_on:
* r0, r3, r6, r7 corrupted
* r4 = physical page table address
*/
- .type __create_page_tables, %function
__create_page_tables:
pgtbl r4 @ page table address
@@ -325,6 +324,7 @@ __create_page_tables:
#endif
#endif
mov pc, lr
+ENDPROC(__create_page_tables)
.ltorg
#include "head-common.S"
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index 8b8c9d38a76..0bbf8062539 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -8,8 +8,8 @@
#include <linux/init.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index 1f6822dfae7..f4470307edb 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -1,7 +1,6 @@
#include <linux/module.h>
#include <linux/types.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
/*
* Copy data from IO memory space to "real" memory space.
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index f88efb135b7..2f3eb795fa6 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -112,18 +112,17 @@ static struct irq_desc bad_irq_desc = {
asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
- struct irq_desc *desc = irq_desc + irq;
+
+ irq_enter();
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (irq >= NR_IRQS)
- desc = &bad_irq_desc;
-
- irq_enter();
-
- desc_handle_irq(irq, desc);
+ handle_bad_irq(irq, &bad_irq_desc);
+ else
+ generic_handle_irq(irq);
/* AT91 specific workaround */
irq_finish(irq);
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index b4565bb133c..da1f94906a4 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -488,7 +488,7 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
if (!ubit)
addr -= reg_count;
- addr += (!pbit ^ !ubit);
+ addr += (!pbit == !ubit);
reg_bit_vector = insn & 0xffff;
while (reg_bit_vector) {
@@ -503,7 +503,7 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
if (wbit) {
if (!ubit)
addr -= reg_count;
- addr -= (!pbit ^ !ubit);
+ addr -= (!pbit == !ubit);
regs->uregs[rn] = (long)addr;
}
}
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index d28513f14d0..3f9abe0e9af 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -200,9 +200,12 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
}
}
-int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
{
+ unsigned long flags;
+ local_irq_save(flags);
kprobe_handler(regs);
+ local_irq_restore(flags);
return 0;
}
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index fae5beb3c3d..440dc62cdc3 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -6,10 +6,10 @@
#include <linux/kexec.h>
#include <linux/delay.h>
#include <linux/reboot.h>
+#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
-#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index a68259a0ccc..9203ba7d58e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -47,7 +47,7 @@ void *module_alloc(unsigned long size)
if (!area)
return NULL;
- return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
}
#else /* CONFIG_MMU */
void *module_alloc(unsigned long size)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 3fd88233706..d3ea6fa8952 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -28,12 +28,12 @@
#include <linux/pm.h>
#include <linux/tick.h>
#include <linux/utsname.h>
+#include <linux/uaccess.h>
#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
-#include <asm/uaccess.h>
#include <asm/mach/time.h>
static const char *processor_modes[] = {
@@ -267,35 +267,6 @@ void show_regs(struct pt_regs * regs)
__backtrace();
}
-void show_fpregs(struct user_fp *regs)
-{
- int i;
-
- for (i = 0; i < 8; i++) {
- unsigned long *p;
- char type;
-
- p = (unsigned long *)(regs->fpregs + i);
-
- switch (regs->ftype[i]) {
- case 1: type = 'f'; break;
- case 2: type = 'd'; break;
- case 3: type = 'e'; break;
- default: type = '?'; break;
- }
- if (regs->init_flag)
- type = '?';
-
- printk(" f%d(%c): %08lx %08lx %08lx%c",
- i, type, p[0], p[1], p[2], i & 1 ? '\n' : ' ');
- }
-
-
- printk("FPSR: %08lx FPCR: %08lx\n",
- (unsigned long)regs->fpsr,
- (unsigned long)regs->fpcr);
-}
-
/*
* Free current thread data structures etc..
*/
@@ -414,7 +385,7 @@ unsigned long get_wchan(struct task_struct *p)
do {
if (fp < stack_start || fp > stack_end)
return 0;
- lr = pc_pointer (((unsigned long *)fp)[-1]);
+ lr = ((unsigned long *)fp)[-1];
if (!in_sched_functions(lr))
return lr;
fp = *(unsigned long *) (fp - 12);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 4b05dc5c102..df653ea5925 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -18,8 +18,8 @@
#include <linux/security.h>
#include <linux/init.h>
#include <linux/signal.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/traps.h>
@@ -126,7 +126,7 @@ ptrace_getrn(struct task_struct *child, unsigned long insn)
val = get_user_reg(child, reg);
if (reg == 15)
- val = pc_pointer(val + 8);
+ val += 8;
return val;
}
@@ -278,8 +278,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
else
base -= aluop2;
}
- if (read_u32(child, base, &alt) == 0)
- alt = pc_pointer(alt);
+ read_u32(child, base, &alt);
}
break;
@@ -305,8 +304,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
base = ptrace_getrn(child, insn);
- if (read_u32(child, base + nr_regs, &alt) == 0)
- alt = pc_pointer(alt);
+ read_u32(child, base + nr_regs, &alt);
break;
}
break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 2ca7038b67a..1f1eecca7f5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -26,11 +26,13 @@
#include <linux/fs.h>
#include <asm/cpu.h>
+#include <asm/cputype.h>
#include <asm/elf.h>
#include <asm/procinfo.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
#include <asm/tlbflush.h>
#include <asm/mach/arch.h>
@@ -59,13 +61,14 @@ __setup("fpe=", fpe_setup);
extern void paging_init(struct meminfo *, struct machine_desc *desc);
extern void reboot_setup(char *str);
-extern int root_mountflags;
-extern void _stext, _text, _etext, __data_start, _edata, _end;
+extern void _text, _etext, __data_start, _edata, _end;
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
unsigned int __machine_arch_type;
EXPORT_SYMBOL(__machine_arch_type);
+unsigned int cacheid;
+EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
@@ -81,8 +84,6 @@ EXPORT_SYMBOL(system_serial_high);
unsigned int elf_hwcap;
EXPORT_SYMBOL(elf_hwcap);
-unsigned long __initdata vmalloc_reserve = 128 << 20;
-
#ifdef MULTI_CPU
struct processor processor;
@@ -111,9 +112,6 @@ static struct stack stacks[NR_CPUS];
char elf_platform[ELF_PLATFORM_SIZE];
EXPORT_SYMBOL(elf_platform);
-unsigned long phys_initrd_start __initdata = 0;
-unsigned long phys_initrd_size __initdata = 0;
-
static struct meminfo meminfo __initdata = { 0, };
static const char *cpu_name;
static const char *machine_name;
@@ -178,63 +176,6 @@ static struct resource io_res[] = {
#define lp1 io_res[1]
#define lp2 io_res[2]
-static const char *cache_types[16] = {
- "write-through",
- "write-back",
- "write-back",
- "undefined 3",
- "undefined 4",
- "undefined 5",
- "write-back",
- "write-back",
- "undefined 8",
- "undefined 9",
- "undefined 10",
- "undefined 11",
- "undefined 12",
- "undefined 13",
- "write-back",
- "undefined 15",
-};
-
-static const char *cache_clean[16] = {
- "not required",
- "read-block",
- "cp15 c7 ops",
- "undefined 3",
- "undefined 4",
- "undefined 5",
- "cp15 c7 ops",
- "cp15 c7 ops",
- "undefined 8",
- "undefined 9",
- "undefined 10",
- "undefined 11",
- "undefined 12",
- "undefined 13",
- "cp15 c7 ops",
- "undefined 15",
-};
-
-static const char *cache_lockdown[16] = {
- "not supported",
- "not supported",
- "not supported",
- "undefined 3",
- "undefined 4",
- "undefined 5",
- "format A",
- "format B",
- "undefined 8",
- "undefined 9",
- "undefined 10",
- "undefined 11",
- "undefined 12",
- "undefined 13",
- "format C",
- "undefined 15",
-};
-
static const char *proc_arch[] = {
"undefined/unknown",
"3",
@@ -255,61 +196,19 @@ static const char *proc_arch[] = {
"?(17)",
};
-#define CACHE_TYPE(x) (((x) >> 25) & 15)
-#define CACHE_S(x) ((x) & (1 << 24))
-#define CACHE_DSIZE(x) (((x) >> 12) & 4095) /* only if S=1 */
-#define CACHE_ISIZE(x) ((x) & 4095)
-
-#define CACHE_SIZE(y) (((y) >> 6) & 7)
-#define CACHE_ASSOC(y) (((y) >> 3) & 7)
-#define CACHE_M(y) ((y) & (1 << 2))
-#define CACHE_LINE(y) ((y) & 3)
-
-static inline void dump_cache(const char *prefix, int cpu, unsigned int cache)
-{
- unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
-
- printk("CPU%u: %s: %d bytes, associativity %d, %d byte lines, %d sets\n",
- cpu, prefix,
- mult << (8 + CACHE_SIZE(cache)),
- (mult << CACHE_ASSOC(cache)) >> 1,
- 8 << CACHE_LINE(cache),
- 1 << (6 + CACHE_SIZE(cache) - CACHE_ASSOC(cache) -
- CACHE_LINE(cache)));
-}
-
-static void __init dump_cpu_info(int cpu)
-{
- unsigned int info = read_cpuid(CPUID_CACHETYPE);
-
- if (info != processor_id) {
- printk("CPU%u: D %s %s cache\n", cpu, cache_is_vivt() ? "VIVT" : "VIPT",
- cache_types[CACHE_TYPE(info)]);
- if (CACHE_S(info)) {
- dump_cache("I cache", cpu, CACHE_ISIZE(info));
- dump_cache("D cache", cpu, CACHE_DSIZE(info));
- } else {
- dump_cache("cache", cpu, CACHE_ISIZE(info));
- }
- }
-
- if (arch_is_coherent())
- printk("Cache coherency enabled\n");
-}
-
int cpu_architecture(void)
{
int cpu_arch;
- if ((processor_id & 0x0008f000) == 0) {
+ if ((read_cpuid_id() & 0x0008f000) == 0) {
cpu_arch = CPU_ARCH_UNKNOWN;
- } else if ((processor_id & 0x0008f000) == 0x00007000) {
- cpu_arch = (processor_id & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
- } else if ((processor_id & 0x00080000) == 0x00000000) {
- cpu_arch = (processor_id >> 16) & 7;
+ } else if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
+ cpu_arch = (read_cpuid_id() & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
+ } else if ((read_cpuid_id() & 0x00080000) == 0x00000000) {
+ cpu_arch = (read_cpuid_id() >> 16) & 7;
if (cpu_arch)
cpu_arch += CPU_ARCH_ARMv3;
- } else if ((processor_id & 0x000f0000) == 0x000f0000) {
+ } else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
unsigned int mmfr0;
/* Revised CPUID format. Read the Memory Model Feature
@@ -330,6 +229,34 @@ int cpu_architecture(void)
return cpu_arch;
}
+static void __init cacheid_init(void)
+{
+ unsigned int cachetype = read_cpuid_cachetype();
+ unsigned int arch = cpu_architecture();
+
+ if (arch >= CPU_ARCH_ARMv7) {
+ cacheid = CACHEID_VIPT_NONALIASING;
+ if ((cachetype & (3 << 14)) == 1 << 14)
+ cacheid |= CACHEID_ASID_TAGGED;
+ } else if (arch >= CPU_ARCH_ARMv6) {
+ if (cachetype & (1 << 23))
+ cacheid = CACHEID_VIPT_ALIASING;
+ else
+ cacheid = CACHEID_VIPT_NONALIASING;
+ } else {
+ cacheid = CACHEID_VIVT;
+ }
+
+ printk("CPU: %s data cache, %s instruction cache\n",
+ cache_is_vivt() ? "VIVT" :
+ cache_is_vipt_aliasing() ? "VIPT aliasing" :
+ cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown",
+ cache_is_vivt() ? "VIVT" :
+ icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
+ cache_is_vipt_aliasing() ? "VIPT aliasing" :
+ cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
+}
+
/*
* These functions re-use the assembly code in head.S, which
* already provide the required functionality.
@@ -346,10 +273,10 @@ static void __init setup_processor(void)
* types. The linker builds this table for us from the
* entries in arch/arm/mm/proc-*.S
*/
- list = lookup_processor_type(processor_id);
+ list = lookup_processor_type(read_cpuid_id());
if (!list) {
printk("CPU configuration botched (ID %08x), unable "
- "to continue.\n", processor_id);
+ "to continue.\n", read_cpuid_id());
while (1);
}
@@ -369,7 +296,7 @@ static void __init setup_processor(void)
#endif
printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
- cpu_name, processor_id, (int)processor_id & 15,
+ cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
@@ -379,14 +306,14 @@ static void __init setup_processor(void)
elf_hwcap &= ~HWCAP_THUMB;
#endif
+ cacheid_init();
cpu_proc_init();
}
/*
* cpu_init - initialise one CPU.
*
- * cpu_init dumps the cache information, initialises SMP specific
- * information, and sets up the per-CPU stacks.
+ * cpu_init sets up the per-CPU stacks.
*/
void cpu_init(void)
{
@@ -398,9 +325,6 @@ void cpu_init(void)
BUG();
}
- if (system_state == SYSTEM_BOOTING)
- dump_cpu_info(cpu);
-
/*
* setup stacks for re-entrant exception handlers
*/
@@ -443,20 +367,6 @@ static struct machine_desc * __init setup_machine(unsigned int nr)
return list;
}
-static void __init early_initrd(char **p)
-{
- unsigned long start, size;
-
- start = memparse(*p, p);
- if (**p == ',') {
- size = memparse((*p) + 1, p);
-
- phys_initrd_start = start;
- phys_initrd_size = size;
- }
-}
-__early_param("initrd=", early_initrd);
-
static void __init arm_add_memory(unsigned long start, unsigned long size)
{
struct membank *bank;
@@ -503,17 +413,6 @@ static void __init early_mem(char **p)
__early_param("mem=", early_mem);
/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
- */
-static void __init early_vmalloc(char **arg)
-{
- vmalloc_reserve = memparse(*arg, arg);
-}
-__early_param("vmalloc=", early_vmalloc);
-
-/*
* Initial parsing of the command line.
*/
static void __init parse_cmdline(char **cmdline_p, char *from)
@@ -527,12 +426,12 @@ static void __init parse_cmdline(char **cmdline_p, char *from)
struct early_params *p;
for (p = &__early_begin; p < &__early_end; p++) {
- int len = strlen(p->arg);
+ int arglen = strlen(p->arg);
- if (memcmp(from, p->arg, len) == 0) {
+ if (memcmp(from, p->arg, arglen) == 0) {
if (to != command_line)
to -= 1;
- from += len;
+ from += arglen;
p->fn(&from);
while (*from != ' ' && *from != '\0')
@@ -579,18 +478,13 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
kernel_data.end = virt_to_phys(&_end - 1);
for (i = 0; i < mi->nr_banks; i++) {
- unsigned long virt_start, virt_end;
-
if (mi->bank[i].size == 0)
continue;
- virt_start = __phys_to_virt(mi->bank[i].start);
- virt_end = virt_start + mi->bank[i].size - 1;
-
res = alloc_bootmem_low(sizeof(*res));
res->name = "System RAM";
- res->start = __virt_to_phys(virt_start);
- res->end = __virt_to_phys(virt_end);
+ res->start = mi->bank[i].start;
+ res->end = mi->bank[i].start + mi->bank[i].size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
request_resource(&iomem_resource, res);
@@ -694,26 +588,6 @@ static int __init parse_tag_ramdisk(const struct tag *tag)
__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
-static int __init parse_tag_initrd(const struct tag *tag)
-{
- printk(KERN_WARNING "ATAG_INITRD is deprecated; "
- "please update your bootloader.\n");
- phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
- phys_initrd_size = tag->u.initrd.size;
- return 0;
-}
-
-__tagtable(ATAG_INITRD, parse_tag_initrd);
-
-static int __init parse_tag_initrd2(const struct tag *tag)
-{
- phys_initrd_start = tag->u.initrd.start;
- phys_initrd_size = tag->u.initrd.size;
- return 0;
-}
-
-__tagtable(ATAG_INITRD2, parse_tag_initrd2);
-
static int __init parse_tag_serialnr(const struct tag *tag)
{
system_serial_low = tag->u.serialnr.low;
@@ -901,28 +775,12 @@ static const char *hwcap_str[] = {
NULL
};
-static void
-c_show_cache(struct seq_file *m, const char *type, unsigned int cache)
-{
- unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
-
- seq_printf(m, "%s size\t\t: %d\n"
- "%s assoc\t\t: %d\n"
- "%s line length\t: %d\n"
- "%s sets\t\t: %d\n",
- type, mult << (8 + CACHE_SIZE(cache)),
- type, (mult << CACHE_ASSOC(cache)) >> 1,
- type, 8 << CACHE_LINE(cache),
- type, 1 << (6 + CACHE_SIZE(cache) - CACHE_ASSOC(cache) -
- CACHE_LINE(cache)));
-}
-
static int c_show(struct seq_file *m, void *v)
{
int i;
seq_printf(m, "Processor\t: %s rev %d (%s)\n",
- cpu_name, (int)processor_id & 15, elf_platform);
+ cpu_name, read_cpuid_id() & 15, elf_platform);
#if defined(CONFIG_SMP)
for_each_online_cpu(i) {
@@ -949,47 +807,26 @@ static int c_show(struct seq_file *m, void *v)
if (elf_hwcap & (1 << i))
seq_printf(m, "%s ", hwcap_str[i]);
- seq_printf(m, "\nCPU implementer\t: 0x%02x\n", processor_id >> 24);
+ seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
- if ((processor_id & 0x0008f000) == 0x00000000) {
+ if ((read_cpuid_id() & 0x0008f000) == 0x00000000) {
/* pre-ARM7 */
- seq_printf(m, "CPU part\t: %07x\n", processor_id >> 4);
+ seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4);
} else {
- if ((processor_id & 0x0008f000) == 0x00007000) {
+ if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
/* ARM7 */
seq_printf(m, "CPU variant\t: 0x%02x\n",
- (processor_id >> 16) & 127);
+ (read_cpuid_id() >> 16) & 127);
} else {
/* post-ARM7 */
seq_printf(m, "CPU variant\t: 0x%x\n",
- (processor_id >> 20) & 15);
+ (read_cpuid_id() >> 20) & 15);
}
seq_printf(m, "CPU part\t: 0x%03x\n",
- (processor_id >> 4) & 0xfff);
- }
- seq_printf(m, "CPU revision\t: %d\n", processor_id & 15);
-
- {
- unsigned int cache_info = read_cpuid(CPUID_CACHETYPE);
- if (cache_info != processor_id) {
- seq_printf(m, "Cache type\t: %s\n"
- "Cache clean\t: %s\n"
- "Cache lockdown\t: %s\n"
- "Cache format\t: %s\n",
- cache_types[CACHE_TYPE(cache_info)],
- cache_clean[CACHE_TYPE(cache_info)],
- cache_lockdown[CACHE_TYPE(cache_info)],
- CACHE_S(cache_info) ? "Harvard" : "Unified");
-
- if (CACHE_S(cache_info)) {
- c_show_cache(m, "I", CACHE_ISIZE(cache_info));
- c_show_cache(m, "D", CACHE_DSIZE(cache_info));
- } else {
- c_show_cache(m, "Cache", CACHE_ISIZE(cache_info));
- }
- }
+ (read_cpuid_id() >> 4) & 0xfff);
}
+ seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
seq_puts(m, "\n");
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ef2f86a5e78..80b8b5c7e07 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -11,11 +11,11 @@
#include <linux/signal.h>
#include <linux/personality.h>
#include <linux/freezer.h>
+#include <linux/uaccess.h>
#include <asm/elf.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
-#include <asm/uaccess.h>
#include <asm/unistd.h>
#include "ptrace.h"
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 0128687ba0f..b3ec641b5cf 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -27,8 +27,7 @@
#include <linux/file.h>
#include <linux/utsname.h>
#include <linux/ipc.h>
-
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
unsigned long new_len, unsigned long flags,
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 96ab5f52949..42623db7f87 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -82,7 +82,7 @@
#include <linux/socket.h>
#include <linux/net.h>
#include <linux/ipc.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
struct oldabi_stat64 {
unsigned long long st_dev;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 368d171754c..c68b44aa88d 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -59,7 +59,7 @@ unsigned long profile_pc(struct pt_regs *regs)
if (in_lock_functions(pc)) {
fp = regs->ARM_fp;
- pc = pc_pointer(((unsigned long *)fp)[-1]);
+ pc = ((unsigned long *)fp)[-1];
}
return pc;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 872f1f8fbb5..57e6874d0b8 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -19,15 +19,13 @@
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/kprobes.h>
+#include <linux/uaccess.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/traps.h>
-#include <asm/io.h>
#include "ptrace.h"
#include "signal.h"
@@ -69,7 +67,8 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
*/
static int verify_stack(unsigned long sp)
{
- if (sp < PAGE_OFFSET || (sp > (unsigned long)high_memory && high_memory != 0))
+ if (sp < PAGE_OFFSET ||
+ (sp > (unsigned long)high_memory && high_memory != NULL))
return -EFAULT;
return 0;
@@ -328,17 +327,6 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
get_user(instr, (u32 __user *)pc);
}
-#ifdef CONFIG_KPROBES
- /*
- * It is possible to have recursive kprobes, so we can't call
- * the kprobe trap handler with the undef_lock held.
- */
- if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) {
- kprobe_trap_handler(regs, instr);
- return;
- }
-#endif
-
if (call_undef_hook(regs, instr) == 0)
return;
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index 180000bfdc8..17127db906f 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -14,8 +14,8 @@
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/thread_notify.h>
-#include <asm/io.h>
static inline void dsp_save_state(u32 *state)
{
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 55e57a1c2e6..1154d924080 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -47,3 +47,5 @@ ENTRY(__aeabi_llsl)
mov al, al, lsl r2
mov pc, lr
+ENDPROC(__ashldi3)
+ENDPROC(__aeabi_llsl)
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 0b31398f89b..9f8b35572f8 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -47,3 +47,5 @@ ENTRY(__aeabi_lasr)
mov ah, ah, asr r2
mov pc, lr
+ENDPROC(__ashrdi3)
+ENDPROC(__aeabi_lasr)
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 84dc890d2bf..b0951d0e8b2 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -30,6 +30,8 @@ ENTRY(c_backtrace)
#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
mov pc, lr
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
#else
stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location...
movs frame, r0 @ if frame pointer is zero
@@ -103,6 +105,8 @@ for_each_frame: tst frame, mask @ Check for address exceptions
mov r1, frame
bl printk
no_frame: ldmfd sp!, {r4 - r8, pc}
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
.section __ex_table,"a"
.align 3
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 389567c2409..80f3115cbee 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -19,3 +19,5 @@ ENTRY(_change_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_change_bit_le)
bitop eor
+ENDPROC(_change_bit_be)
+ENDPROC(_change_bit_le)
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index ecb28dcdaf7..4d6bc71231f 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -41,9 +41,10 @@ USER( strplt r2, [r0], #4)
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
-USER( strnebt r2, [r0], #1)
+USER( strnebt r2, [r0])
mov r0, #0
ldmfd sp!, {r1, pc}
+ENDPROC(__clear_user)
.section .fixup,"ax"
.align 0
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 34751653302..1a63e43a1df 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -20,3 +20,5 @@ ENTRY(_clear_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_clear_bit_le)
bitop bic
+ENDPROC(_clear_bit_be)
+ENDPROC(_clear_bit_le)
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 6b7363ce749..56799a165cc 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -87,6 +87,8 @@ ENTRY(__copy_from_user)
#include "copy_template.S"
+ENDPROC(__copy_from_user)
+
.section .fixup,"ax"
.align 0
copy_abort_preamble
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 666c99cc074..6ae04db1ca4 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -44,3 +44,4 @@ ENTRY(copy_page)
PLD( ldmeqia r1!, {r3, r4, ip, lr} )
PLD( beq 2b )
ldmfd sp!, {r4, pc} @ 3
+ENDPROC(copy_page)
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 5224d94688d..22f968bbdff 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -90,6 +90,8 @@ ENTRY(__copy_to_user)
#include "copy_template.S"
+ENDPROC(__copy_to_user)
+
.section .fixup,"ax"
.align 0
copy_abort_preamble
diff --git a/arch/arm/lib/csumipv6.S b/arch/arm/lib/csumipv6.S
index 9621469beec..3ac6ef01bc4 100644
--- a/arch/arm/lib/csumipv6.S
+++ b/arch/arm/lib/csumipv6.S
@@ -29,4 +29,5 @@ ENTRY(__csum_ipv6_magic)
adcs r0, r0, r2
adcs r0, r0, #0
ldmfd sp!, {pc}
+ENDPROC(__csum_ipv6_magic)
diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S
index a78dae5a7b2..31d3cb34740 100644
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@@ -139,3 +139,4 @@ ENTRY(csum_partial)
tst len, #0x1c
bne 4b
b .Lless4
+ENDPROC(csum_partial)
diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S
index 21effe0dbf9..d03fc71fc88 100644
--- a/arch/arm/lib/csumpartialcopy.S
+++ b/arch/arm/lib/csumpartialcopy.S
@@ -18,13 +18,11 @@
*/
.macro save_regs
- mov ip, sp
- stmfd sp!, {r1, r4 - r8, fp, ip, lr, pc}
- sub fp, ip, #4
+ stmfd sp!, {r1, r4 - r8, lr}
.endm
.macro load_regs
- ldmfd sp, {r1, r4 - r8, fp, sp, pc}
+ ldmfd sp!, {r1, r4 - r8, pc}
.endm
.macro load1b, reg1
@@ -50,5 +48,6 @@
.endm
#define FN_ENTRY ENTRY(csum_partial_copy_nocheck)
+#define FN_EXIT ENDPROC(csum_partial_copy_nocheck)
#include "csumpartialcopygeneric.S"
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index c50e8f5285d..d620a5f22a0 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -329,3 +329,4 @@ FN_ENTRY
adcs sum, sum, r4, push #24
mov r5, r4, get_byte_1
b .Lexit
+FN_EXIT
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index c3b93e22ea2..14677fb4b0c 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -18,13 +18,11 @@
.text
.macro save_regs
- mov ip, sp
- stmfd sp!, {r1 - r2, r4 - r8, fp, ip, lr, pc}
- sub fp, ip, #4
+ stmfd sp!, {r1, r2, r4 - r8, lr}
.endm
.macro load_regs
- ldmfd sp, {r1, r2, r4-r8, fp, sp, pc}
+ ldmfd sp!, {r1, r2, r4 - r8, pc}
.endm
.macro load1b, reg1
@@ -82,6 +80,7 @@
*/
#define FN_ENTRY ENTRY(csum_partial_copy_from_user)
+#define FN_EXIT ENDPROC(csum_partial_copy_from_user)
#include "csumpartialcopygeneric.S"
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index 930a7025922..8d6a8762ab8 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -60,3 +60,6 @@ ENTRY(__delay)
#endif
bhi __delay
mov pc, lr
+ENDPROC(__udelay)
+ENDPROC(__const_udelay)
+ENDPROC(__delay)
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 58eef660762..1425e789ba8 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -198,3 +198,4 @@ ENTRY(__do_div64)
mov xh, #0
ldr pc, [sp], #8
+ENDPROC(__do_div64)
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index a5ca0248aa4..8c4defc4f3c 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -33,6 +33,7 @@ ENTRY(_find_first_zero_bit_le)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_zero_bit_le)
/*
* Purpose : Find next 'zero' bit
@@ -50,6 +51,7 @@ ENTRY(_find_next_zero_bit_le)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_zero_bit_le)
/*
* Purpose : Find a 'one' bit
@@ -67,6 +69,7 @@ ENTRY(_find_first_bit_le)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_bit_le)
/*
* Purpose : Find next 'one' bit
@@ -83,6 +86,7 @@ ENTRY(_find_next_bit_le)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_bit_le)
#ifdef __ARMEB__
@@ -99,6 +103,7 @@ ENTRY(_find_first_zero_bit_be)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_zero_bit_be)
ENTRY(_find_next_zero_bit_be)
teq r1, #0
@@ -113,6 +118,7 @@ ENTRY(_find_next_zero_bit_be)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_zero_bit_be)
ENTRY(_find_first_bit_be)
teq r1, #0
@@ -127,6 +133,7 @@ ENTRY(_find_first_bit_be)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(_find_first_bit_be)
ENTRY(_find_next_bit_be)
teq r1, #0
@@ -140,6 +147,7 @@ ENTRY(_find_next_bit_be)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
+ENDPROC(_find_next_bit_be)
#endif
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 2034d4dbe6a..6763088b760 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -26,16 +26,16 @@
* Note that ADDR_LIMIT is either 0 or 0xc0000000.
* Note also that it is intended that __get_user_bad is not global.
*/
+#include <linux/linkage.h>
#include <asm/errno.h>
- .global __get_user_1
-__get_user_1:
+ENTRY(__get_user_1)
1: ldrbt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__get_user_1)
- .global __get_user_2
-__get_user_2:
+ENTRY(__get_user_2)
2: ldrbt r2, [r0], #1
3: ldrbt r3, [r0]
#ifndef __ARMEB__
@@ -45,17 +45,19 @@ __get_user_2:
#endif
mov r0, #0
mov pc, lr
+ENDPROC(__get_user_2)
- .global __get_user_4
-__get_user_4:
+ENTRY(__get_user_4)
4: ldrt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__get_user_4)
__get_user_bad:
mov r2, #0
mov r0, #-EFAULT
mov pc, lr
+ENDPROC(__get_user_bad)
.section __ex_table, "a"
.long 1b, __get_user_bad
diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S
index fb966ad0276..9f4238987fe 100644
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@@ -120,3 +120,4 @@ ENTRY(__raw_readsb)
strgtb r3, [r1]
ldmfd sp!, {r4 - r6, pc}
+ENDPROC(__raw_readsb)
diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S
index 75a9121cb23..5fb97e7f9f4 100644
--- a/arch/arm/lib/io-readsl.S
+++ b/arch/arm/lib/io-readsl.S
@@ -76,3 +76,4 @@ ENTRY(__raw_readsl)
8: mov r3, ip, get_byte_0
strb r3, [r1, #0]
mov pc, lr
+ENDPROC(__raw_readsl)
diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S
index 4db1c5f0b21..1f393d42593 100644
--- a/arch/arm/lib/io-readsw-armv4.S
+++ b/arch/arm/lib/io-readsw-armv4.S
@@ -128,3 +128,4 @@ ENTRY(__raw_readsw)
_BE_ONLY_( movne ip, ip, lsr #24 )
strneb ip, [r1]
ldmfd sp!, {r4, pc}
+ENDPROC(__raw_readsw)
diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S
index 7eba2b6cc69..68b92f4acae 100644
--- a/arch/arm/lib/io-writesb.S
+++ b/arch/arm/lib/io-writesb.S
@@ -91,3 +91,4 @@ ENTRY(__raw_writesb)
strgtb r3, [r0]
ldmfd sp!, {r4, r5, pc}
+ENDPROC(__raw_writesb)
diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S
index f8f14dd227c..8d3b7813725 100644
--- a/arch/arm/lib/io-writesl.S
+++ b/arch/arm/lib/io-writesl.S
@@ -64,3 +64,4 @@ ENTRY(__raw_writesl)
str ip, [r0]
bne 6b
mov pc, lr
+ENDPROC(__raw_writesl)
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index c8e85bd653b..d6585612c86 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -94,3 +94,4 @@ ENTRY(__raw_writesw)
3: movne ip, r3, lsr #8
strneh ip, [r0]
mov pc, lr
+ENDPROC(__raw_writesw)
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index 4e492f4b3f0..67964bcfc85 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -230,6 +230,8 @@ ENTRY(__aeabi_uidiv)
mov r0, r0, lsr r2
mov pc, lr
+ENDPROC(__udivsi3)
+ENDPROC(__aeabi_uidiv)
ENTRY(__umodsi3)
@@ -245,6 +247,7 @@ ENTRY(__umodsi3)
mov pc, lr
+ENDPROC(__umodsi3)
ENTRY(__divsi3)
ENTRY(__aeabi_idiv)
@@ -284,6 +287,8 @@ ENTRY(__aeabi_idiv)
rsbmi r0, r0, #0
mov pc, lr
+ENDPROC(__divsi3)
+ENDPROC(__aeabi_idiv)
ENTRY(__modsi3)
@@ -305,6 +310,8 @@ ENTRY(__modsi3)
rsbmi r0, r0, #0
mov pc, lr
+ENDPROC(__modsi3)
+
#ifdef CONFIG_AEABI
ENTRY(__aeabi_uidivmod)
@@ -316,6 +323,8 @@ ENTRY(__aeabi_uidivmod)
sub r1, r1, r3
mov pc, lr
+ENDPROC(__aeabi_uidivmod)
+
ENTRY(__aeabi_idivmod)
stmfd sp!, {r0, r1, ip, lr}
@@ -325,6 +334,8 @@ ENTRY(__aeabi_idivmod)
sub r1, r1, r3
mov pc, lr
+ENDPROC(__aeabi_idivmod)
+
#endif
Ldiv0:
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index a86dbdd59cc..99ea338bf87 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -47,3 +47,5 @@ ENTRY(__aeabi_llsr)
mov ah, ah, lsr r2
mov pc, lr
+ENDPROC(__lshrdi3)
+ENDPROC(__aeabi_llsr)
diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S
index e7ab1ea8eba..1da86991d70 100644
--- a/arch/arm/lib/memchr.S
+++ b/arch/arm/lib/memchr.S
@@ -23,3 +23,4 @@ ENTRY(memchr)
sub r0, r0, #1
2: movne r0, #0
mov pc, lr
+ENDPROC(memchr)
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index 7e71d6708a8..e0d002641d3 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -57,3 +57,4 @@ ENTRY(memcpy)
#include "copy_template.S"
+ENDPROC(memcpy)
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 2e301b7bd8f..12549187088 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -196,3 +196,4 @@ ENTRY(memmove)
18: backward_copy_shift push=24 pull=8
+ENDPROC(memmove)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index b477d4ac88e..761eefa7624 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -124,3 +124,4 @@ ENTRY(memset)
tst r2, #1
strneb r1, [r0], #1
mov pc, lr
+ENDPROC(memset)
diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S
index b8f79d80ee9..3fbdef5f802 100644
--- a/arch/arm/lib/memzero.S
+++ b/arch/arm/lib/memzero.S
@@ -122,3 +122,4 @@ ENTRY(__memzero)
tst r1, #1 @ 1 a byte left over
strneb r2, [r0], #1 @ 1
mov pc, lr @ 1
+ENDPROC(__memzero)
diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S
index d89c6061579..36c91b4957e 100644
--- a/arch/arm/lib/muldi3.S
+++ b/arch/arm/lib/muldi3.S
@@ -43,3 +43,5 @@ ENTRY(__aeabi_lmul)
adc xh, xh, ip, lsr #16
mov pc, lr
+ENDPROC(__muldi3)
+ENDPROC(__aeabi_lmul)
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 08ec7dffa52..864f3c1c4f1 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -26,16 +26,16 @@
* Note that ADDR_LIMIT is either 0 or 0xc0000000
* Note also that it is intended that __put_user_bad is not global.
*/
+#include <linux/linkage.h>
#include <asm/errno.h>
- .global __put_user_1
-__put_user_1:
+ENTRY(__put_user_1)
1: strbt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_1)
- .global __put_user_2
-__put_user_2:
+ENTRY(__put_user_2)
mov ip, r2, lsr #8
#ifndef __ARMEB__
2: strbt r2, [r0], #1
@@ -46,23 +46,25 @@ __put_user_2:
#endif
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_2)
- .global __put_user_4
-__put_user_4:
+ENTRY(__put_user_4)
4: strt r2, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_4)
- .global __put_user_8
-__put_user_8:
+ENTRY(__put_user_8)
5: strt r2, [r0], #4
6: strt r3, [r0]
mov r0, #0
mov pc, lr
+ENDPROC(__put_user_8)
__put_user_bad:
mov r0, #-EFAULT
mov pc, lr
+ENDPROC(__put_user_bad)
.section __ex_table, "a"
.long 1b, __put_user_bad
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index 83bc23d5b03..1dd7176c4b2 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -20,3 +20,5 @@ ENTRY(_set_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_set_bit_le)
bitop orr
+ENDPROC(_set_bit_be)
+ENDPROC(_set_bit_le)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index 67c2bf4774b..a16fb208c84 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -185,6 +185,8 @@ ENTRY(sha_transform)
ldmfd sp!, {r4 - r8, pc}
+ENDPROC(sha_transform)
+
.L_sha_K:
.word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
@@ -204,3 +206,4 @@ ENTRY(sha_init)
stmia r0, {r1, r2, r3, ip, lr}
ldr pc, [sp], #4
+ENDPROC(sha_init)
diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S
index 9f18d6fdee6..d8f2a1c1aea 100644
--- a/arch/arm/lib/strchr.S
+++ b/arch/arm/lib/strchr.S
@@ -24,3 +24,4 @@ ENTRY(strchr)
movne r0, #0
subeq r0, r0, #1
mov pc, lr
+ENDPROC(strchr)
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 36e3741a377..330373c26dd 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -31,6 +31,7 @@ USER( ldrplbt r3, [r1], #1)
sub r1, r1, #1 @ take NUL character out of count
2: sub r0, r1, ip
mov pc, lr
+ENDPROC(__strncpy_from_user)
.section .fixup,"ax"
.align 0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 18d8fa4f925..90bb9d02083 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -31,6 +31,7 @@ USER( ldrbt r3, [r0], #1)
add r0, r0, #1
2: sub r0, r0, r2
mov pc, lr
+ENDPROC(__strnlen_user)
.section .fixup,"ax"
.align 0
diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S
index 538df220aa4..302f20cd242 100644
--- a/arch/arm/lib/strrchr.S
+++ b/arch/arm/lib/strrchr.S
@@ -23,3 +23,4 @@ ENTRY(strrchr)
bne 1b
mov r0, r3
mov pc, lr
+ENDPROC(strrchr)
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index b25dcd2be53..5c98dc567f0 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -16,3 +16,5 @@ ENTRY(_test_and_change_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_test_and_change_bit_le)
testop eor, strb
+ENDPROC(_test_and_change_bit_be)
+ENDPROC(_test_and_change_bit_le)
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 2dcc4b16b68..543d7094d18 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -16,3 +16,5 @@ ENTRY(_test_and_clear_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_test_and_clear_bit_le)
testop bicne, strneb
+ENDPROC(_test_and_clear_bit_be)
+ENDPROC(_test_and_clear_bit_le)
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 9011c969761..0b3f390401c 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -16,3 +16,5 @@ ENTRY(_test_and_set_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_test_and_set_bit_le)
testop orreq, streqb
+ENDPROC(_test_and_set_bit_be)
+ENDPROC(_test_and_set_bit_le)
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index b48bd6d5fd8..ffdd27498ce 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -277,6 +277,7 @@ USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
b .Lc2u_finished
+ENDPROC(__copy_to_user)
.section .fixup,"ax"
.align 0
@@ -542,6 +543,7 @@ USER( ldrgebt r3, [r1], #1) @ May fault
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
+ENDPROC(__copy_from_user)
.section .fixup,"ax"
.align 0
diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S
index f76de07ac18..f0df6a91db0 100644
--- a/arch/arm/lib/ucmpdi2.S
+++ b/arch/arm/lib/ucmpdi2.S
@@ -33,6 +33,8 @@ ENTRY(__ucmpdi2)
movhi r0, #2
mov pc, lr
+ENDPROC(__ucmpdi2)
+
#ifdef CONFIG_AEABI
ENTRY(__aeabi_ulcmp)
@@ -44,5 +46,7 @@ ENTRY(__aeabi_ulcmp)
movhi r0, #1
mov pc, lr
+ENDPROC(__aeabi_ulcmp)
+
#endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a048b92cb40..5aafb2e2ca7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -175,6 +175,15 @@ config MACH_SAM9_L9260
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
+config MACH_AFEB9260
+ bool "Custom afeb9260 board v1"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using custom afeb9260 board based on
+ open hardware design. Select this for revision 1 of the board.
+ <svn://194.85.238.22/home/users/george/svn/arm9eb>
+ <http://groups.google.com/group/arm9fpga-evolution-board>
+
config MACH_USB_A9260
bool "CALAO USB-A9260"
depends on ARCH_AT91SAM9260
@@ -314,6 +323,19 @@ config AT91_PROGRAMMABLE_CLOCKS
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
+config AT91_SLOW_CLOCK
+ bool "Suspend-to-RAM disables main oscillator"
+ depends on SUSPEND
+ help
+ Select this if you want Suspend-to-RAM to save the most power
+ possible (without powering off the CPU) by disabling the PLLs
+ and main oscillator so that only the 32 KiHz clock is available.
+
+ When only that slow-clock is available, some peripherals lose
+ functionality. Many can't issue wakeup events unless faster
+ clocks are available. Some lose their operating state and
+ need to be completely re-initialized.
+
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 7d641f97516..cca612d97ca 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
+obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -64,6 +65,7 @@ obj-y += leds.o
# Power Management
obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 638948c1677..0fc0adaebd5 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -141,8 +141,8 @@ static struct clk tcb_clk = {
.pmc_mask = 1 << AT91CAP9_ID_TCB,
.type = CLK_TYPE_PERIPHERAL,
};
-static struct clk pwmc_clk = {
- .name = "pwmc_clk",
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
.pmc_mask = 1 << AT91CAP9_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -207,7 +207,7 @@ static struct clk *periph_clocks[] __initdata = {
&ssc1_clk,
&ac97_clk,
&tcb_clk,
- &pwmc_clk,
+ &pwm_clk,
&macb_clk,
&aestdes_clk,
&adc_clk,
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index abb4aac8fa9..5ebd4273d35 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -719,6 +719,60 @@ static void __init at91_add_device_watchdog(void) {}
/* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_PWMC,
+ .end = AT91CAP9_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_PWMC,
+ .end = AT91CAP9_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+ if (mask & (1 << AT91_PWM0))
+ at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91cap9_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+
+/* --------------------------------------------------------------------
* AC97
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 80bfab5680e..ada4b676910 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -129,8 +129,8 @@ static struct clk tcb_clk = {
.pmc_mask = 1 << AT91SAM9263_ID_TCB,
.type = CLK_TYPE_PERIPHERAL,
};
-static struct clk pwmc_clk = {
- .name = "pwmc_clk",
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
.pmc_mask = 1 << AT91SAM9263_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -187,7 +187,7 @@ static struct clk *periph_clocks[] __initdata = {
&ssc1_clk,
&ac97_clk,
&tcb_clk,
- &pwmc_clk,
+ &pwm_clk,
&macb_clk,
&twodge_clk,
&udc_clk,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index c93992f55dc..8b884083f76 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -886,6 +886,59 @@ static void __init at91_add_device_watchdog(void) {}
/* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_PWMC,
+ .end = AT91SAM9263_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_PWMC,
+ .end = AT91SAM9263_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+ if (mask & (1 << AT91_PWM0))
+ at91_set_B_periph(AT91_PIN_PB7, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91sam9263_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 556bddf35b4..252e954b49f 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -131,8 +131,8 @@ static struct clk tc2_clk = {
.pmc_mask = 1 << AT91SAM9RL_ID_TC2,
.type = CLK_TYPE_PERIPHERAL,
};
-static struct clk pwmc_clk = {
- .name = "pwmc_clk",
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -180,7 +180,7 @@ static struct clk *periph_clocks[] __initdata = {
&tc0_clk,
&tc1_clk,
&tc2_clk,
- &pwmc_clk,
+ &pwm_clk,
&tsc_clk,
&dma_clk,
&udphs_clk,
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 620886341fb..87deb1e1b52 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -527,6 +527,51 @@ static void __init at91_add_device_tc(void) { }
/* --------------------------------------------------------------------
+ * Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource tsadcc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_TSC,
+ .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_TSC,
+ .end = AT91SAM9RL_ID_TSC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device at91sam9rl_tsadcc_device = {
+ .name = "atmel_tsadcc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &tsadcc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = tsadcc_resources,
+ .num_resources = ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(void)
+{
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */
+
+ platform_device_register(&at91sam9rl_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
@@ -592,6 +637,59 @@ static void __init at91_add_device_watchdog(void) {}
/* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_PWMC,
+ .end = AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_PWMC,
+ .end = AT91SAM9RL_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+ if (mask & (1 << AT91_PWM0))
+ at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PB9, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PD5, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PD8, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91sam9rl_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 869b5e28d19..dfff2895f4b 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,8 +23,8 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/time.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/time.h>
#include <mach/at91_tc.h>
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
new file mode 100644
index 00000000000..9c040c78889
--- /dev/null
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -0,0 +1,210 @@
+/*
+ * linux/arch/arm/mach-at91/board-afeb-9260v1.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2008 Sergey Lapin
+ *
+ * A custom board designed as open hardware; PCBs and various information
+ * is available at http://groups.google.com/group/arm9fpga-evolution-board/
+ * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+
+static void __init afeb9260_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init afeb9260_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata afeb9260_usbh_data = {
+ .ports = 1,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata afeb9260_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info afeb9260_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata afeb9260_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA9,
+ .is_rmii = 0,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata afeb9260_nand_partition[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = (640 * SZ_1K),
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
+ return afeb9260_nand_partition;
+}
+
+static struct atmel_nand_data __initdata afeb9260_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+ .bus_width_16 = 0,
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+ .slot_b = 1,
+ .wire4 = 1,
+};
+
+
+
+static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("fm3130", 0x68),
+ I2C_BOARD_INFO("24c64", 0x50),
+ },
+};
+
+static void __init afeb9260_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&afeb9260_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&afeb9260_udc_data);
+ /* SPI */
+ at91_add_device_spi(afeb9260_spi_devices,
+ ARRAY_SIZE(afeb9260_spi_devices));
+ /* NAND */
+ at91_add_device_nand(&afeb9260_nand_data);
+ /* Ethernet */
+ at91_add_device_eth(&afeb9260_macb_data);
+
+ /* Standard function's pin assignments are not
+ * appropriate for us and generic code provide
+ * no API to configure these pins any other way */
+ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
+ /* MMC */
+ at91_add_device_mmc(0, &afeb9260_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(afeb9260_i2c_devices,
+ ARRAY_SIZE(afeb9260_i2c_devices));
+}
+
+MACHINE_START(AFEB9260, "Custom afeb9260 board")
+ /* Maintainer: Sergey Lapin <slapin@ossfans.org> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = afeb9260_map_io,
+ .init_irq = afeb9260_init_irq,
+ .init_machine = afeb9260_board_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 196199552eb..201b89392dc 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -214,7 +214,7 @@ static struct physmap_flash_data cap9adk_nor_data = {
};
#define NOR_BASE AT91_CHIPSELECT_0
-#define NOR_SIZE 0x800000
+#define NOR_SIZE SZ_8M
static struct resource nor_flash_resources[] = {
{
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index afa1ff0e957..db1f9544d2e 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -34,6 +33,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -114,6 +114,30 @@ static struct spi_board_info carmeva_spi_devices[] = {
},
};
+static struct gpio_led carmeva_leds[] = {
+ { /* "user led 1", LED9 */
+ .name = "led9",
+ .gpio = AT91_PIN_PA21,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 2", LED10 */
+ .name = "led10",
+ .gpio = AT91_PIN_PA25,
+ .active_low = 1,
+ },
+ { /* "user led 3", LED11 */
+ .name = "led11",
+ .gpio = AT91_PIN_PA26,
+ .active_low = 1,
+ },
+ { /* "user led 4", LED12 */
+ .name = "led12",
+ .gpio = AT91_PIN_PA18,
+ .active_low = 1,
+ }
+};
+
static void __init carmeva_board_init(void)
{
/* Serial */
@@ -132,6 +156,8 @@ static void __init carmeva_board_init(void)
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
at91_add_device_mmc(0, &carmeva_mmc_data);
+ /* LEDs */
+ at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
}
MACHINE_START(CARMEVA, "Carmeva")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index cb7c9a8fa48..fea2529ebcf 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,6 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -37,6 +36,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -114,7 +114,7 @@ static struct spi_board_info csb337_spi_devices[] = {
};
#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE 0x800000
+#define CSB_FLASH_SIZE SZ_8M
static struct mtd_partition csb_flash_partitions[] = {
{
@@ -193,11 +193,11 @@ static struct platform_device csb300_button_device = {
static void __init csb300_add_device_buttons(void)
{
- at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
+ at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
at91_set_deglitch(AT91_PIN_PB29, 1);
- at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
+ at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
at91_set_deglitch(AT91_PIN_PB28, 1);
- at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
+ at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
at91_set_deglitch(AT91_PIN_PA21, 1);
platform_device_register(&csb300_button_device);
@@ -224,7 +224,7 @@ static struct gpio_led csb_leds[] = {
.gpio = AT91_PIN_PB0,
.active_low = 1,
.default_trigger = "ide-disk",
- },
+ }
};
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 8db8bd8babd..cfa3f04b220 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,6 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -34,6 +33,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -72,7 +72,7 @@ static struct at91_udc_data __initdata csb637_udc_data = {
};
#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE 0x1000000
+#define CSB_FLASH_SIZE SZ_16M
static struct mtd_partition csb_flash_partitions[] = {
{
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 43e1aa7ecef..0fd0f5bc77e 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,6 @@
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -38,6 +37,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
@@ -157,7 +157,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
};
#define DK_FLASH_BASE AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE 0x200000
+#define DK_FLASH_SIZE SZ_2M
static struct physmap_flash_data dk_flash_data = {
.width = 2,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index bfeee8a2af2..1d69908617f 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -86,7 +86,7 @@ static struct mtd_partition __initdata my_flash0_partitions[] =
{ /* 0x8400 */
.name = "Darrell-loader",
.offset = 0,
- .size = 12* 1056,
+ .size = 12 * 1056,
},
{
.name = "U-boot",
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 60626e7a349..4cdfaac8e59 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,6 @@
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -38,6 +37,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
@@ -116,7 +116,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE 0x200000
+#define EK_FLASH_SIZE SZ_2M
static struct physmap_flash_data ek_flash_data = {
.width = 2,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index dbc912d633c..859727e7ea3 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -105,7 +105,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
// };
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE 0x400000
+#define PICOTUX200_FLASH_SIZE SZ_4M
static struct physmap_flash_data picotux200_flash_data = {
.width = 2,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 4c28413426c..cfb4571a2e2 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,6 @@
#include <linux/input.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -39,6 +38,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91_shdwc.h>
@@ -119,18 +119,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Uboot & Kernel",
- .offset = 0x00000000,
- .size = 16 * 1024 * 1024,
+ .offset = 0,
+ .size = SZ_16M,
},
{
.name = "Root FS",
- .offset = 0x01000000,
- .size = 120 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
},
{
.name = "FS",
- .offset = 0x08800000,
- .size = 120 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
},
};
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e4910cb26c1..99bb4cc23a0 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -126,11 +126,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Bootloader Area",
.offset = 0,
- .size = 10 * 1024 * 1024,
+ .size = 10 * SZ_1M,
},
{
.name = "User Area",
- .offset = 10 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index cb20e70b3b0..b49eb6e4918 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -27,8 +27,10 @@
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
#include <linux/clk.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -37,6 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -163,11 +166,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
- .size = 256 * 1024,
+ .size = SZ_256K,
},
{
.name = "Partition 2",
- .offset = 256 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
@@ -222,6 +225,73 @@ static struct gpio_led ek_leds[] = {
}
};
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+ .byte_len = SZ_512K / 8,
+ .page_size = 128,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c512", 0x50),
+ .platform_data = &at24c512,
+ },
+ /* more devices can be added using expansion connectors */
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA30,
+ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA31,
+ .code = BTN_4,
+ .desc = "Button 4",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA30, 1);
+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
+ at91_set_deglitch(AT91_PIN_PA31, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -239,12 +309,14 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SSC (to AT73C213) */
at73c213_set_clk(&at73c213_data);
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 1a9963b811c..4977409d4fc 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,6 @@
#include <video/atmel_lcdc.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -44,6 +43,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
@@ -168,11 +168,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
- .size = 256 * 1024,
+ .size = SZ_256K,
},
{
.name = "Partition 2",
- .offset = 256 * 1024 ,
+ .offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
@@ -435,24 +435,28 @@ static struct gpio_keys_button ek_buttons[] = {
.code = BTN_0,
.desc = "Button 0",
.active_low = 1,
+ .wakeup = 1,
},
{
.gpio = AT91_PIN_PA26,
.code = BTN_1,
.desc = "Button 1",
.active_low = 1,
+ .wakeup = 1,
},
{
.gpio = AT91_PIN_PA25,
.code = BTN_2,
.desc = "Button 2",
.active_low = 1,
+ .wakeup = 1,
},
{
.gpio = AT91_PIN_PA24,
.code = BTN_3,
.desc = "Button 3",
.active_low = 1,
+ .wakeup = 1,
}
};
@@ -472,13 +476,13 @@ static struct platform_device ek_button_device = {
static void __init ek_add_device_buttons(void)
{
- at91_set_gpio_input(AT91_PIN_PA27, 0); /* btn0 */
+ at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */
at91_set_deglitch(AT91_PIN_PA27, 1);
- at91_set_gpio_input(AT91_PIN_PA26, 0); /* btn1 */
+ at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */
at91_set_deglitch(AT91_PIN_PA26, 1);
- at91_set_gpio_input(AT91_PIN_PA25, 0); /* btn2 */
+ at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */
at91_set_deglitch(AT91_PIN_PA25, 1);
- at91_set_gpio_input(AT91_PIN_PA24, 0); /* btn3 */
+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */
at91_set_deglitch(AT91_PIN_PA24, 1);
platform_device_register(&ek_button_device);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b1d11960a73..8354015c6a2 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,13 +26,14 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/i2c/at24.h>
#include <linux/fb.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/leds.h>
#include <video/atmel_lcdc.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -41,6 +42,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
@@ -172,11 +174,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
- .size = 64 * 1024 * 1024,
+ .size = SZ_64M,
},
{
.name = "Partition 2",
- .offset = 64 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
@@ -203,12 +205,30 @@ static struct atmel_nand_data __initdata ek_nand_data = {
/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+ .byte_len = SZ_512K / 8,
+ .page_size = 128,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c512", 0x50),
+ .platform_data = &at24c512,
+ },
+ /* more devices can be added using expansion connectors */
+};
+
+/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static struct fb_videomode at91_tft_vga_modes[] = {
{
- .name = "TX09D50VM1CCA @ 60",
+ .name = "TX09D50VM1CCA @ 60",
.refresh = 60,
.xres = 240, .yres = 320,
.pixclock = KHZ2PICOS(4965),
@@ -224,7 +244,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
static struct fb_monspecs at91fb_default_monspecs = {
.manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
+ .monitor = "TX09D70VM1CCA",
.modedb = at91_tft_vga_modes,
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
@@ -235,7 +255,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
};
#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
static void at91_lcdc_power_control(int on)
@@ -277,7 +297,7 @@ static struct gpio_keys_button ek_buttons[] = {
.active_low = 1,
.desc = "right_click",
.wakeup = 1,
- },
+ }
};
static struct gpio_keys_platform_data ek_button_data = {
@@ -296,9 +316,9 @@ static struct platform_device ek_button_device = {
static void __init ek_add_device_buttons(void)
{
- at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
+ at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */
at91_set_deglitch(AT91_PIN_PC5, 1);
- at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
+ at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */
at91_set_deglitch(AT91_PIN_PC4, 1);
platform_device_register(&ek_button_device);
@@ -320,25 +340,32 @@ static struct atmel_ac97_data ek_ac97_data = {
* LEDs ... these could all be PWM-driven, for variable brightness
*/
static struct gpio_led ek_leds[] = {
- { /* "left" led, green, userled1, pwm1 */
- .name = "ds1",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "right" led, green, userled2, pwm2 */
+ { /* "right" led, green, userled2 (could be driven by pwm2) */
.name = "ds2",
.gpio = AT91_PIN_PC29,
.active_low = 1,
.default_trigger = "nand-disk",
},
- { /* "power" led, yellow, pwm0 */
+ { /* "power" led, yellow (could be driven by pwm0) */
.name = "ds3",
.gpio = AT91_PIN_PB7,
.default_trigger = "heartbeat",
}
};
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+ /* For now only DS1 is PWM-driven (by pwm1) */
+ {
+ .name = "ds1",
+ .gpio = 1, /* is PWM channel number */
+ .active_low = 1,
+ .default_trigger = "none",
+ }
+};
+
static void __init ek_board_init(void)
{
@@ -360,7 +387,7 @@ static void __init ek_board_init(void)
/* NAND */
at91_add_device_nand(&ek_nand_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
@@ -369,6 +396,7 @@ static void __init ek_board_init(void)
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index d4eba5c0ce0..b588ead14d6 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -122,16 +122,16 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Bootstrap",
.offset = 0,
- .size = 4 * 1024 * 1024,
+ .size = 4 * SZ_1M,
},
{
.name = "Partition 1",
- .offset = 4 * 1024 * 1024,
- .size = 60 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 60 * SZ_1M,
},
{
.name = "Partition 2",
- .offset = 64 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c6dce49c388..27085186430 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,6 @@
#include <video/atmel_lcdc.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -27,6 +26,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
@@ -81,11 +81,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
- .size = 256 * 1024,
+ .size = SZ_256K,
},
{
.name = "Partition 2",
- .offset = 256 * 1024 ,
+ .offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
@@ -195,6 +195,8 @@ static void __init ek_board_init(void)
at91_add_device_mmc(0, &ek_mmc_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* Touch Screen Controller */
+ at91_add_device_tsadcc();
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index f9d0b65da40..7c350357333 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,6 @@
#include <linux/input.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -39,6 +38,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91_shdwc.h>
@@ -93,18 +93,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Uboot & Kernel",
- .offset = 0x00000000,
- .size = 16 * 1024 * 1024,
+ .offset = 0,
+ .size = SZ_16M,
},
{
.name = "Root FS",
- .offset = 0x01000000,
- .size = 120 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
},
{
.name = "FS",
- .offset = 0x08800000,
- .size = 120 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
}
};
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 673e5c27214..391b566c457 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,6 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -38,6 +37,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91_shdwc.h>
@@ -106,18 +106,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Linux Kernel",
- .offset = 0x00000000,
- .size = 16 * 1024 * 1024,
+ .offset = 0,
+ .size = SZ_16M,
},
{
.name = "Root FS",
- .offset = 0x01000000,
- .size = 120 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
},
{
.name = "FS",
- .offset = 0x08800000,
- .size = 120 * 1024 * 1024,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
}
};
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 36b380aad00..e22bf051f83 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,6 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -42,6 +41,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
@@ -150,27 +150,27 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
{
.name = "AT91 NAND partition 1, boot",
.offset = 0,
- .size = 1 * SZ_256K
+ .size = SZ_256K
},
{
.name = "AT91 NAND partition 2, kernel",
- .offset = 1 * SZ_256K,
- .size = 2 * SZ_1M - 1 * SZ_256K
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = (2 * SZ_1M) - SZ_256K
},
{
.name = "AT91 NAND partition 3, filesystem",
- .offset = 2 * SZ_1M,
+ .offset = MTDPART_OFS_NXTBLK,
.size = 14 * SZ_1M
},
{
.name = "AT91 NAND partition 4, storage",
- .offset = 16 * SZ_1M,
- .size = 16 * SZ_1M
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_16M
},
{
.name = "AT91 NAND partition 5, ext-fs",
- .offset = 32 * SZ_1M,
- .size = 32 * SZ_1M
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M
}
};
@@ -193,24 +193,24 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
* NOR Flash
*/
#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE 0x1000000
+#define YL9200_FLASH_SIZE SZ_16M
static struct mtd_partition yl9200_flash_partitions[] = {
{
.name = "Bootloader",
- .size = 0x00040000,
.offset = 0,
+ .size = SZ_256K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "Kernel",
- .size = 0x001C0000,
- .offset = 0x00040000,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = (2 * SZ_1M) - SZ_256K
},
{
.name = "Filesystem",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00200000
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
}
};
@@ -390,10 +390,6 @@ static struct spi_board_info yl9200_spi_devices[] = {
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
-#define AT91_FB_REG_BASE 0x80000000L
-#define AT91_FB_REG_SIZE 0x200
-#define AT91_FB_VMEM_BASE 0x80200000L
-#define AT91_FB_VMEM_SIZE 0x200000L
static void __init yl9200_init_video(void)
{
@@ -516,29 +512,33 @@ static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
{S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
};
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
.initregs = yl9200_s1dfb_initregs,
.initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
.platform_init_video = yl9200_init_video,
};
+#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
+#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
+#define YL9200_FB_VMEM_SIZE SZ_2M
+
static struct resource yl9200_s1dfb_resource[] = {
[0] = { /* video mem */
.name = "s1d13xxxfb memory",
- .start = AT91_FB_VMEM_BASE,
- .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+ .start = YL9200_FB_VMEM_BASE,
+ .end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
.flags = IORESOURCE_MEM,
},
[1] = { /* video registers */
.name = "s1d13xxxfb registers",
- .start = AT91_FB_REG_BASE,
- .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+ .start = YL9200_FB_REG_BASE,
+ .end = YL9200_FB_REG_BASE + SZ_512 -1,
.flags = IORESOURCE_MEM,
},
};
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device yl9200_s1dfb_device = {
.name = "s1d13806fb",
.id = -1,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index f5c2847161f..e4345106ee5 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -22,8 +22,7 @@
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 8392d5b517f..7e5ebb5bdd1 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -18,8 +18,8 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <mach/at91_pio.h>
#include <mach/gpio.h>
@@ -404,7 +404,6 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
pin = bank->chipbase;
- gpio = &irq_desc[pin];
while (isr) {
if (isr & 1) {
@@ -417,7 +416,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
gpio_irq_mask(pin);
}
else
- desc_handle_irq(pin, gpio);
+ generic_handle_irq(pin);
}
pin++;
gpio++;
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 0448ac36ead..974d0bd05b5 100644
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91_pit.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Periodic Interval Timer (PIT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index 7cd1b39aaa4..cbd2bf052c1 100644
--- a/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91_rstc.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Reset Controller (RSTC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
index 71782e5d215..7ec75de8bbb 100644
--- a/arch/arm/mach-at91/include/mach/at91_rtt.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91_rtt.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Real-time Timer (RTT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 60be5ae624f..c4ce07e8a8f 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91_shdwc.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Shutdown Controller (SHDWC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
index 973b4526a98..fecc2e9f0ca 100644
--- a/arch/arm/mach-at91/include/mach/at91_wdt.h
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91_wdt.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index bca878f3bd8..1499b1cbffd 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -1,6 +1,8 @@
/*
* arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
*
+ * (C) 2008 Andrew Victor
+ *
* DDR/SDR Controller (DDRSDRC) - System peripherals registers.
* Based on AT91CAP9 datasheet revision B.
*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index f027de5df95..020f02ed921 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -1,6 +1,8 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
*
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index db62b1f1830..69c6501915d 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -1,6 +1,8 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
*
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 1921181c63c..b7260389f7c 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* SDRAM Controllers (SDRAMC) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index ec6ad1338b5..57de6207e57 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -1,6 +1,9 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9_smc.h
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* Static Memory Controllers (SMC) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index acd60f2a072..fb51f0e0a83 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -133,6 +133,16 @@ struct atmel_uart_data {
extern void __init at91_add_device_serial(void);
/*
+ * PWM
+ */
+#define AT91_PWM0 0
+#define AT91_PWM1 1
+#define AT91_PWM2 2
+#define AT91_PWM3 3
+
+extern void __init at91_add_device_pwm(u32 mask);
+
+/*
* SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
* platform devices. Their SSC ID is part of their configuration data,
* along with information about which SSC signals they should use.
@@ -162,9 +172,13 @@ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
/* ISI */
extern void __init at91_add_device_isi(void);
+ /* Touchscreen Controller */
+extern void __init at91_add_device_tsadcc(void);
+
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index bda29ccbcd9..36bd55f3fc6 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/at91_aic.h>
#define NR_AIC_IRQS 32
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 0410d548e9b..18bdcdeb474 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/atmel_serial.h>
#if defined(CONFIG_AT91_EARLY_DBGU)
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index fec03c59ff9..0415a839e1a 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -21,15 +22,13 @@
#if defined(CONFIG_NEW_LEDS)
-#include <linux/platform_device.h>
-
/*
* New cross-platform LED support.
*/
static struct gpio_led_platform_data led_data;
-static struct platform_device at91_leds = {
+static struct platform_device at91_gpio_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &led_data,
@@ -47,7 +46,7 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr)
led_data.leds = leds;
led_data.num_leds = nr;
- platform_device_register(&at91_leds);
+ platform_device_register(&at91_gpio_leds_device);
}
#else
@@ -57,6 +56,44 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
/* ------------------------------------------------------------------------- */
+#if defined (CONFIG_LEDS_ATMEL_PWM)
+
+/*
+ * PWM Leds
+ */
+
+static struct gpio_led_platform_data pwm_led_data;
+
+static struct platform_device at91_pwm_leds_device = {
+ .name = "leds-atmel-pwm",
+ .id = -1,
+ .dev.platform_data = &pwm_led_data,
+};
+
+void __init at91_pwm_leds(struct gpio_led *leds, int nr)
+{
+ int i;
+ u32 pwm_mask = 0;
+
+ if (!nr)
+ return;
+
+ for (i = 0; i < nr; i++)
+ pwm_mask |= (1 << leds[i].gpio);
+
+ pwm_led_data.leds = leds;
+ pwm_led_data.num_leds = nr;
+
+ at91_add_device_pwm(pwm_mask);
+ platform_device_register(&at91_pwm_leds_device);
+}
+#else
+void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
#if defined(CONFIG_LEDS)
#include <asm/leds.h>
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index ec2fe4ca1e2..9bb4f043aa2 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -17,8 +17,8 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
new file mode 100644
index 00000000000..987fab3d846
--- /dev/null
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ * Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+#else
+#include <mach/at91sam9_sdramc.h>
+#endif
+
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+/*
+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
+ * clock during suspend by adjusting its prescalar and divisor.
+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
+ * are errata regarding adjusting the prescalar and divisor.
+ */
+#undef SLOWDOWN_MASTER_CLOCK
+
+#define MCKRDY_TIMEOUT 1000
+#define MOSCRDY_TIMEOUT 1000
+#define PLLALOCK_TIMEOUT 1000
+#define PLLBLOCK_TIMEOUT 1000
+
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+ .macro wait_mckrdy
+ mov r4, #MCKRDY_TIMEOUT
+1: sub r4, r4, #1
+ cmp r4, #0
+ beq 2f
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+ tst r3, #AT91_PMC_MCKRDY
+ beq 1b
+2:
+ .endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+ .macro wait_moscrdy
+ mov r4, #MOSCRDY_TIMEOUT
+1: sub r4, r4, #1
+ cmp r4, #0
+ beq 2f
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+ tst r3, #AT91_PMC_MOSCS
+ beq 1b
+2:
+ .endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+ .macro wait_pllalock
+ mov r4, #PLLALOCK_TIMEOUT
+1: sub r4, r4, #1
+ cmp r4, #0
+ beq 2f
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+ tst r3, #AT91_PMC_LOCKA
+ beq 1b
+2:
+ .endm
+
+/*
+ * Wait until PLLB has locked.
+ */
+ .macro wait_pllblock
+ mov r4, #PLLBLOCK_TIMEOUT
+1: sub r4, r4, #1
+ cmp r4, #0
+ beq 2f
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+ tst r3, #AT91_PMC_LOCKB
+ beq 1b
+2:
+ .endm
+
+ .text
+
+ENTRY(at91_slow_clock)
+ /* Save registers on stack */
+ stmfd sp!, {r0 - r12, lr}
+
+ /*
+ * Register usage:
+ * R1 = Base address of AT91_PMC
+ * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+ * R3 = temporary register
+ * R4 = temporary register
+ */
+ ldr r1, .at91_va_base_pmc
+ ldr r2, .at91_va_base_sdramc
+
+ /* Drain write buffer */
+ mcr p15, 0, r0, c7, c10, 4
+
+#ifdef CONFIG_ARCH_AT91RM9200
+ /* Put SDRAM in self-refresh mode */
+ mov r3, #1
+ str r3, [r2, #AT91_SDRAMC_SRR]
+#elif defined(CONFIG_ARCH_AT91CAP9)
+ /* Enable SDRAM self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+ str r3, .saved_sam9_lpr
+
+ mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+ /* Enable SDRAM self-refresh mode */
+ ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ str r3, .saved_sam9_lpr
+
+ mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+ /* Save Master clock setting */
+ ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ str r3, .saved_mckr
+
+ /*
+ * Set the Master clock source to slow clock
+ */
+ bic r3, r3, #AT91_PMC_CSS
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+ wait_mckrdy
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+ /*
+ * Set the Master Clock PRES and MDIV fields.
+ *
+ * See AT91RM9200 errata #27 and #28 for details.
+ */
+ mov r3, #0
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+ wait_mckrdy
+#endif
+
+ /* Save PLLA setting and disable it */
+ ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ str r3, .saved_pllar
+
+ mov r3, #AT91_PMC_PLLCOUNT
+ orr r3, r3, #(1 << 29) /* bit 29 always set */
+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+ wait_pllalock
+
+ /* Save PLLB setting and disable it */
+ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ str r3, .saved_pllbr
+
+ mov r3, #AT91_PMC_PLLCOUNT
+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+ wait_pllblock
+
+ /* Turn off the main oscillator */
+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+ bic r3, r3, #AT91_PMC_MOSCEN
+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+ /* Wait for interrupt */
+ mcr p15, 0, r0, c7, c0, 4
+
+ /* Turn on the main oscillator */
+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+ orr r3, r3, #AT91_PMC_MOSCEN
+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+ wait_moscrdy
+
+ /* Restore PLLB setting */
+ ldr r3, .saved_pllbr
+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+ wait_pllblock
+
+ /* Restore PLLA setting */
+ ldr r3, .saved_pllar
+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+ wait_pllalock
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+ /*
+ * First set PRES if it was not 0,
+ * than set CSS and MDIV fields.
+ *
+ * See AT91RM9200 errata #27 and #28 for details.
+ */
+ ldr r3, .saved_mckr
+ tst r3, #AT91_PMC_PRES
+ beq 2f
+ and r3, r3, #AT91_PMC_PRES
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+ wait_mckrdy
+#endif
+
+ /*
+ * Restore master clock setting
+ */
+2: ldr r3, .saved_mckr
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+ wait_mckrdy
+
+#ifdef CONFIG_ARCH_AT91RM9200
+ /* Do nothing - self-refresh is automatically disabled. */
+#elif defined(CONFIG_ARCH_AT91CAP9)
+ /* Restore LPR on AT91CAP9 */
+ ldr r3, .saved_sam9_lpr
+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+ /* Restore LPR on AT91SAM9 */
+ ldr r3, .saved_sam9_lpr
+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+ /* Restore registers, and return */
+ ldmfd sp!, {r0 - r12, pc}
+
+
+.saved_mckr:
+ .word 0
+
+.saved_pllar:
+ .word 0
+
+.saved_pllbr:
+ .word 0
+
+.saved_sam9_lpr:
+ .word 0
+
+.at91_va_base_pmc:
+ .word AT91_VA_BASE_SYS + AT91_PMC
+
+#ifdef CONFIG_ARCH_AT91RM9200
+.at91_va_base_sdramc:
+ .word AT91_VA_BASE_SYS
+#elif defined(CONFIG_ARCH_AT91CAP9)
+.at91_va_base_sdramc:
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC
+#else
+.at91_va_base_sdramc:
+ .word AT91_VA_BASE_SYS + AT91_SDRAMC
+#endif
+
+ENTRY(at91_slow_clock_sz)
+ .word .-at91_slow_clock
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 474616dcd7a..5f18eccdc72 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -22,10 +22,10 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index aa02aa5a01f..71a80b5b8ad 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -22,9 +22,9 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index a8eade40317..24e96159e3e 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -20,9 +20,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
-#include <asm/io.h>
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index 38623cfcac5..9a12d856228 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -19,10 +19,10 @@
*/
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/io.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/clps7111.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index 262c3c36145..15121446efc 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -21,9 +21,9 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index f51f97d4f21..0d94a30fd6f 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -22,9 +22,9 @@
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index ef1fcd17189..d581ef0bcd2 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -21,11 +21,11 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/sched.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
-#include <asm/io.h>
#include <asm/hardware/clps7111.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index cc1b82179e8..c3a33b8a5aa 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_8250.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -23,7 +24,6 @@
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
index e8da3c58df7..d02fcf28ee0 100644
--- a/arch/arm/mach-clps7500/include/mach/irq.h
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -10,8 +10,8 @@
* 11-08-1999 PJB Created ARM7500 version, derived from RiscPC code
*/
+#include <linux/io.h>
#include <asm/hardware/iomd.h>
-#include <asm/io.h>
static inline int fixup_irq(unsigned int irq)
{
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
index 3326aa99d3e..87b32db470c 100644
--- a/arch/arm/mach-clps7500/include/mach/memory.h
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -32,4 +32,12 @@
#define FLUSH_BASE_PHYS 0x00000000
#define FLUSH_BASE 0xdf000000
+/*
+ * Sparsemem support. Each section is a maximum of 64MB. The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS 29
+#define SECTION_SIZE_BITS 26
+
#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
index 624fc2830ae..6d325fbe8b0 100644
--- a/arch/arm/mach-clps7500/include/mach/system.h
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -6,8 +6,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
+#include <linux/io.h>
#include <asm/hardware/iomd.h>
-#include <asm/io.h>
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 99ac2e55774..4dc458597f4 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o mux.o
+ gpio.o mux.o devices.o usb.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 13435578781..a957d239a68 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -13,20 +13,28 @@
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/io.h>
#include <asm/setup.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/i2c.h>
/* other misc. init functions */
void __init davinci_psc_init(void);
@@ -34,10 +42,10 @@ void __init davinci_irq_init(void);
void __init davinci_map_common_io(void);
void __init davinci_init_common_hw(void);
-/* NOR Flash base address set to CS0 by default */
-#define NOR_FLASH_PHYS 0x02000000
+#if defined(CONFIG_MTD_PHYSMAP) || \
+ defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition davinci_evm_partitions[] = {
+static struct mtd_partition davinci_evm_norflash_partitions[] = {
/* bootloader (U-Boot, etc) in first 4 sectors */
{
.name = "bootloader",
@@ -68,32 +76,323 @@ static struct mtd_partition davinci_evm_partitions[] = {
}
};
-static struct physmap_flash_data davinci_evm_flash_data = {
+static struct physmap_flash_data davinci_evm_norflash_data = {
.width = 2,
- .parts = davinci_evm_partitions,
- .nr_parts = ARRAY_SIZE(davinci_evm_partitions),
+ .parts = davinci_evm_norflash_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
};
/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
* limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_flash_resource = {
- .start = NOR_FLASH_PHYS,
- .end = NOR_FLASH_PHYS + SZ_16M - 1,
+static struct resource davinci_evm_norflash_resource = {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device davinci_evm_flash_device = {
+static struct platform_device davinci_evm_norflash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &davinci_evm_flash_data,
+ .platform_data = &davinci_evm_norflash_data,
},
.num_resources = 1,
- .resource = &davinci_evm_flash_resource,
+ .resource = &davinci_evm_norflash_resource,
+};
+
+#endif
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+
+static struct resource ide_resources[] = {
+ {
+ .start = DAVINCI_CFC_ATA_BASE,
+ .end = DAVINCI_CFC_ATA_BASE + 0x7ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_IDE,
+ .end = IRQ_IDE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ide_dma_mask = DMA_32BIT_MASK;
+
+static struct platform_device ide_dev = {
+ .name = "palm_bk3710",
+ .id = -1,
+ .resource = ide_resources,
+ .num_resources = ARRAY_SIZE(ide_resources),
+ .dev = {
+ .dma_mask = &ide_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ },
+};
+
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * I2C GPIO expanders
+ */
+
+#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
+
+
+/* U2 -- LEDs */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS8", .active_low = 1,
+ .default_trigger = "heartbeat", },
+ { .name = "DS7", .active_low = 1, },
+ { .name = "DS6", .active_low = 1, },
+ { .name = "DS5", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS2", .active_low = 1,
+ .default_trigger = "mmc0", },
+ { .name = "DS1", .active_low = 1,
+ .default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int
+evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ }
+
+ /* what an extremely annoying way to be forced to handle
+ * device unregistration ...
+ */
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev,
+ &evm_led_data, sizeof evm_led_data);
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int
+evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u2 = {
+ .gpio_base = PCF_Uxx_BASE(0),
+ .setup = evm_led_setup,
+ .teardown = evm_led_teardown,
+};
+
+
+/* U18 - A/V clock generator and user switch */
+
+static int sw_gpio;
+
+static ssize_t
+sw_show(struct device *d, struct device_attribute *a, char *buf)
+{
+ char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
+
+ strcpy(buf, s);
+ return strlen(s);
+}
+
+static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
+
+static int
+evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ int status;
+
+ /* export dip switch option */
+ sw_gpio = gpio + 7;
+ status = gpio_request(sw_gpio, "user_sw");
+ if (status == 0)
+ status = gpio_direction_input(sw_gpio);
+ if (status == 0)
+ status = device_create_file(&client->dev, &dev_attr_user_sw);
+ else
+ gpio_free(sw_gpio);
+ if (status != 0)
+ sw_gpio = -EINVAL;
+
+ /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
+ gpio_request(gpio + 3, "pll_fs2");
+ gpio_direction_output(gpio + 3, 0);
+
+ gpio_request(gpio + 2, "pll_fs1");
+ gpio_direction_output(gpio + 2, 0);
+
+ gpio_request(gpio + 1, "pll_sr");
+ gpio_direction_output(gpio + 1, 0);
+
+ return 0;
+}
+
+static int
+evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 3);
+
+ if (sw_gpio > 0) {
+ device_remove_file(&client->dev, &dev_attr_user_sw);
+ gpio_free(sw_gpio);
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u18 = {
+ .gpio_base = PCF_Uxx_BASE(1),
+ .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
+ .setup = evm_u18_setup,
+ .teardown = evm_u18_teardown,
};
+
+/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
+
+static int
+evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ /* p0 = nDRV_VBUS (initial: don't supply it) */
+ gpio_request(gpio + 0, "nDRV_VBUS");
+ gpio_direction_output(gpio + 0, 1);
+
+ /* p1 = VDDIMX_EN */
+ gpio_request(gpio + 1, "VDDIMX_EN");
+ gpio_direction_output(gpio + 1, 1);
+
+ /* p2 = VLYNQ_EN */
+ gpio_request(gpio + 2, "VLYNQ_EN");
+ gpio_direction_output(gpio + 2, 1);
+
+ /* p3 = n3V3_CF_RESET (initial: stay in reset) */
+ gpio_request(gpio + 3, "nCF_RESET");
+ gpio_direction_output(gpio + 3, 0);
+
+ /* (p4 unused) */
+
+ /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
+ gpio_request(gpio + 5, "WLAN_RESET");
+ gpio_direction_output(gpio + 5, 1);
+
+ /* p6 = nATA_SEL (initial: select) */
+ gpio_request(gpio + 6, "nATA_SEL");
+ gpio_direction_output(gpio + 6, 0);
+
+ /* p7 = nCF_SEL (initial: deselect) */
+ gpio_request(gpio + 7, "nCF_SEL");
+ gpio_direction_output(gpio + 7, 1);
+
+ return 0;
+}
+
+static int
+evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 7);
+ gpio_free(gpio + 6);
+ gpio_free(gpio + 5);
+ gpio_free(gpio + 3);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 0);
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u35 = {
+ .gpio_base = PCF_Uxx_BASE(2),
+ .setup = evm_u35_setup,
+ .teardown = evm_u35_teardown,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
+ * - ... newer boards may have more
+ */
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("pcf8574", 0x38),
+ .platform_data = &pcf_data_u2,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x39),
+ .platform_data = &pcf_data_u18,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x3a),
+ .platform_data = &pcf_data_u35,
+ },
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ /* ALSO:
+ * - tvl320aic33 audio codec (0x1b)
+ * - msp430 microcontroller (0x23)
+ * - tvp5146 video decoder (0x5d)
+ */
+};
+
+/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
+ * which requires 100 usec of idle bus after i2c writes sent to it.
+ */
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
static struct platform_device *davinci_evm_devices[] __initdata = {
- &davinci_evm_flash_device,
+#if defined(CONFIG_MTD_PHYSMAP) || \
+ defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &davinci_evm_norflash_device,
+#endif
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+ &ide_dev,
+#endif
};
static void __init
@@ -106,13 +405,21 @@ static __init void davinci_evm_init(void)
{
davinci_psc_init();
-#if defined(CONFIG_BLK_DEV_DAVINCI) || defined(CONFIG_BLK_DEV_DAVINCI_MODULE)
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#if defined(CONFIG_MTD_PHYSMAP) || \
+ defined(CONFIG_MTD_PHYSMAP_MODULE)
printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
"but share pins.\n\t Disable IDE for NOR support.\n");
#endif
+#endif
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+
+ /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+ setup_usb(500, 8);
}
static __init void davinci_evm_irq_init(void)
@@ -124,7 +431,7 @@ static __init void davinci_evm_irq_init(void)
MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.phys_io = IO_PHYS,
- .io_pg_offst = (io_p2v(IO_PHYS) >> 18) & 0xfffc,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DAVINCI_DDR_BASE + 0x100),
.map_io = davinci_evm_map_io,
.init_irq = davinci_evm_irq_init,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index d46c69b55aa..28f6dbc95bd 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -16,9 +16,9 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/psc.h>
#include "clock.h"
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
new file mode 100644
index 00000000000..3d4b1de8f89
--- /dev/null
+++ b/arch/arm/mach-davinci/devices.c
@@ -0,0 +1,48 @@
+/*
+ * mach-davinci/devices.c
+ *
+ * DaVinci platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+
+static struct resource i2c_resources[] = {
+ {
+ .start = DAVINCI_I2C_BASE,
+ .end = DAVINCI_I2C_BASE + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device davinci_i2c_device = {
+ .name = "i2c_davinci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(i2c_resources),
+ .resource = i2c_resources,
+};
+
+void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
+{
+ davinci_i2c_device.dev.platform_data = pdata;
+ (void) platform_device_register(&davinci_i2c_device);
+}
+
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index c9cb4f09b18..b49e9d092aa 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -1,7 +1,7 @@
/*
* TI DaVinci GPIO Support
*
- * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2006-2007 David Brownell
* Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -26,47 +26,45 @@
#include <asm/mach/irq.h>
-static DEFINE_SPINLOCK(gpio_lock);
-static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO);
-int gpio_request(unsigned gpio, const char *tag)
-{
- if (gpio >= DAVINCI_N_GPIO)
- return -EINVAL;
+static DEFINE_SPINLOCK(gpio_lock);
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
+struct davinci_gpio {
+ struct gpio_chip chip;
+ struct gpio_controller *__iomem regs;
+};
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
+static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-void gpio_free(unsigned gpio)
-{
- if (gpio >= DAVINCI_N_GPIO)
- return;
-
- clear_bit(gpio, gpio_in_use);
-}
-EXPORT_SYMBOL(gpio_free);
/* create a non-inlined version */
-static struct gpio_controller *__iomem gpio2controller(unsigned gpio)
+static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
+
+/*--------------------------------------------------------------------------*/
+
/*
- * Assuming the pin is muxed as a gpio output, set its output value.
+ * board setup code *MUST* set PINMUX0 and PINMUX1 as
+ * needed, and enable the GPIO clock.
*/
-void __gpio_set(unsigned gpio, int value)
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
+ u32 temp;
- __raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data);
-}
-EXPORT_SYMBOL(__gpio_set);
+ spin_lock(&gpio_lock);
+ temp = __raw_readl(&g->dir);
+ temp |= (1 << offset);
+ __raw_writel(temp, &g->dir);
+ spin_unlock(&gpio_lock);
+ return 0;
+}
/*
* Read the pin's value (works even if it's set up as output);
@@ -75,61 +73,72 @@ EXPORT_SYMBOL(__gpio_set);
* Note that changes are synched to the GPIO clock, so reading values back
* right after you've set them may give old values.
*/
-int __gpio_get(unsigned gpio)
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
- return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+ return (1 << offset) & __raw_readl(&g->in_data);
}
-EXPORT_SYMBOL(__gpio_get);
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * board setup code *MUST* set PINMUX0 and PINMUX1 as
- * needed, and enable the GPIO clock.
- */
-
-int gpio_direction_input(unsigned gpio)
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
u32 temp;
- u32 mask;
-
- if (!g)
- return -EINVAL;
+ u32 mask = 1 << offset;
spin_lock(&gpio_lock);
- mask = __gpio_mask(gpio);
temp = __raw_readl(&g->dir);
- temp |= mask;
+ temp &= ~mask;
+ __raw_writel(mask, value ? &g->set_data : &g->clr_data);
__raw_writel(temp, &g->dir);
spin_unlock(&gpio_lock);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- struct gpio_controller *__iomem g = gpio2controller(gpio);
- u32 temp;
- u32 mask;
+ struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+ struct gpio_controller *__iomem g = d->regs;
- if (!g)
- return -EINVAL;
+ __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+ int i, base;
+
+ for (i = 0, base = 0;
+ i < ARRAY_SIZE(chips);
+ i++, base += 32) {
+ chips[i].chip.label = "DaVinci";
+
+ chips[i].chip.direction_input = davinci_direction_in;
+ chips[i].chip.get = davinci_gpio_get;
+ chips[i].chip.direction_output = davinci_direction_out;
+ chips[i].chip.set = davinci_gpio_set;
+
+ chips[i].chip.base = base;
+ chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ if (chips[i].chip.ngpio > 32)
+ chips[i].chip.ngpio = 32;
+
+ chips[i].regs = gpio2controller(base);
+
+ gpiochip_add(&chips[i].chip);
+ }
- spin_lock(&gpio_lock);
- mask = __gpio_mask(gpio);
- temp = __raw_readl(&g->dir);
- temp &= ~mask;
- __raw_writel(mask, value ? &g->set_data : &g->clr_data);
- __raw_writel(temp, &g->dir);
- spin_unlock(&gpio_lock);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
+pure_initcall(davinci_gpio_setup);
+/*--------------------------------------------------------------------------*/
/*
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
@@ -201,7 +210,6 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
desc->chip->ack(irq);
while (1) {
u32 status;
- struct irq_desc *gpio;
int n;
int res;
@@ -215,12 +223,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
/* now demux them to the right lowlevel handler */
n = (int)get_irq_data(irq);
- gpio = &irq_desc[n];
while (status) {
res = ffs(status);
n += res;
- gpio += res;
- desc_handle_irq(n - 1, gpio - 1);
+ generic_handle_irq(n - 1);
status >>= res;
}
}
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
index 70608f76aed..bf067d60491 100644
--- a/arch/arm/mach-davinci/id.c
+++ b/arch/arm/mach-davinci/id.c
@@ -13,8 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#define JTAG_ID_BASE 0x01c40028
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a97dfbb15e5..4b522e5c70e 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -16,4 +16,7 @@ struct sys_timer;
extern struct sys_timer davinci_timer;
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ec151ccf1e8..b3a2961f0f4 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -14,6 +14,7 @@
#define __DAVINCI_GPIO_H
#include <linux/io.h>
+#include <asm-generic/gpio.h>
#include <mach/hardware.h>
/*
@@ -27,13 +28,16 @@
* need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
* used as gpios, not with other peripherals.
*
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code should write GPIO(N) or:
* - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
* - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
*
* For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
* for now, that's != GPIO(N)
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
#define GPIO(X) (X) /* 0 <= X <= 70 */
#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
@@ -67,11 +71,11 @@ __gpio_to_controller(unsigned gpio)
void *__iomem ptr;
if (gpio < 32)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
else if (gpio < 64)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
else if (gpio < DAVINCI_N_GPIO)
- ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
else
ptr = NULL;
return ptr;
@@ -83,25 +87,17 @@ static inline u32 __gpio_mask(unsigned gpio)
}
/* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging. Illegal constant parameters
- * cause link-time errors.
+ * parameters referencing built-in GPIOs, for low-overhead bitbanging.
*
- * Otherwise, calls with variable parameters use outlined functions.
+ * Otherwise, calls with variable parameters or referencing external
+ * GPIOs (e.g. on GPIO expander chips) use outlined functions.
*/
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
static inline void gpio_set_value(unsigned gpio, int value)
{
- if (__builtin_constant_p(value)) {
+ if (__builtin_constant_p(value) && gpio < DAVINCI_N_GPIO) {
struct gpio_controller *__iomem g;
u32 mask;
- if (gpio >= DAVINCI_N_GPIO)
- __error_inval_gpio();
-
g = __gpio_to_controller(gpio);
mask = __gpio_mask(gpio);
if (value)
@@ -111,48 +107,47 @@ static inline void gpio_set_value(unsigned gpio, int value)
return;
}
- __gpio_set(gpio, value);
+ __gpio_set_value(gpio, value);
}
/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
+ * as outputs, at least for built-in GPIOs.
*
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
+ * NOTE: for built-in GPIOs, changes in reported values are synchronized
+ * to the GPIO clock. This is easily seen after calling gpio_set_value()
+ * and then immediately gpio_get_value(), where the gpio_get_value() will
+ * return the old value until the GPIO clock ticks and the new value gets
+ * latched.
*/
-
static inline int gpio_get_value(unsigned gpio)
{
- struct gpio_controller *__iomem g;
-
- if (!__builtin_constant_p(gpio))
- return __gpio_get(gpio);
+ struct gpio_controller *__iomem g;
- if (gpio >= DAVINCI_N_GPIO)
- return __error_inval_gpio();
+ if (!__builtin_constant_p(gpio) || gpio >= DAVINCI_N_GPIO)
+ return __gpio_get_value(gpio);
g = __gpio_to_controller(gpio);
- return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+ return __gpio_mask(gpio) & __raw_readl(&g->in_data);
}
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
+static inline int gpio_cansleep(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && gpio < DAVINCI_N_GPIO)
+ return 0;
+ else
+ return __gpio_cansleep(gpio);
+}
static inline int gpio_to_irq(unsigned gpio)
{
+ if (gpio >= DAVINCI_N_GPIO)
+ return -EINVAL;
return DAVINCI_N_AINTC_IRQ + gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
+ /* caller guarantees gpio_to_irq() succeeded */
return irq - DAVINCI_N_AINTC_IRQ;
}
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index e2f54168abd..c248e9b7e82 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -14,8 +14,11 @@
/* All frequencies are expressed in kHz */
struct davinci_i2c_platform_data {
- unsigned int bus_freq; /* standard bus frequency */
- unsigned int bus_delay; /* transaction delay */
+ unsigned int bus_freq; /* standard bus frequency (kHz) */
+ unsigned int bus_delay; /* post-transaction delay (usec) */
};
+/* for board setup code */
+void davinci_init_i2c(struct davinci_i2c_platform_data *);
+
#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index e7accb91086..b78ee914049 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -22,9 +22,8 @@
#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
#define IO_SIZE 0x00400000
#define IO_VIRT (IO_PHYS + IO_OFFSET)
-#define io_p2v(pa) ((pa) + IO_OFFSET)
#define io_v2p(va) ((va) - IO_OFFSET)
-#define IO_ADDRESS(x) io_p2v(x)
+#define __IO_ADDRESS(x) ((x) + IO_OFFSET)
/*
* We don't actually have real ISA nor PCI buses, but there is so many
@@ -35,7 +34,12 @@
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
-#ifndef __ASSEMBLER__
+#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
/*
* Functions to access the DaVinci IO region
@@ -46,34 +50,13 @@
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
*/
-#define davinci_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
-#define davinci_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
-#define davinci_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
-
-#define davinci_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
-#define davinci_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define davinci_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
-
-/* 16 bit uses LDRH/STRH, base +/- offset_8 */
-typedef struct { volatile u16 offset[256]; } __regbase16;
-#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \
- ->offset[((vaddr)&0xff)>>1]
-#define __REG16(paddr) __REGV16(io_p2v(paddr))
-
-/* 8/32 bit uses LDR/STR, base +/- offset_12 */
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \
- ->offset[((vaddr)&4095)>>0]
-#define __REG8(paddr) __REGV8(io_p2v(paddr))
-
-typedef struct { volatile u32 offset[4096]; } __regbase32;
-#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \
- ->offset[((vaddr)&4095)>>2]
-
-#define __REG(paddr) __REGV32(io_p2v(paddr))
-#else
+#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
+#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
+#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
-#define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
+#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
+#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 84ff77aeb73..17ca41dc2c5 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -11,7 +11,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
extern void davinci_watchdog_reset(void);
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 5bb66b61c1a..299515f70b8 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -11,9 +11,9 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/io.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 12ca9f29f84..38021af8359 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -22,9 +22,9 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index aa2fc375a32..58754f066d5 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -21,8 +21,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index caf101e2cc6..3010f997125 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -26,8 +26,8 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/serial.h>
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 206e80d4171..3b9a296b5c4 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -15,8 +15,8 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
new file mode 100644
index 00000000000..fe182a85159
--- /dev/null
+++ b/arch/arm/mach-davinci/usb.c
@@ -0,0 +1,116 @@
+/*
+ * USB
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/musb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct musb_hdrc_eps_bits musb_eps[] = {
+ { "ep1_tx", 8, },
+ { "ep1_rx", 8, },
+ { "ep2_tx", 8, },
+ { "ep2_rx", 8, },
+ { "ep3_tx", 5, },
+ { "ep3_rx", 5, },
+ { "ep4_tx", 5, },
+ { "ep4_rx", 5, },
+};
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = true,
+ .dyn_fifo = true,
+ .soft_con = true,
+ .dma = true,
+
+ .num_eps = 5,
+ .dma_channels = 8,
+ .ram_bits = 10,
+ .eps_bits = musb_eps,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+ /* OTG requires a Mini-AB connector */
+ .mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+ .mode = MUSB_PERIPHERAL,
+#elif defined(CONFIG_USB_MUSB_HOST)
+ .mode = MUSB_HOST,
+#endif
+ .config = &musb_config,
+};
+
+static struct resource usb_resources[] = {
+ {
+ /* physical address */
+ .start = DAVINCI_USB_OTG_BASE,
+ .end = DAVINCI_USB_OTG_BASE + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_USBINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 usb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device usb_dev = {
+ .name = "musb_hdrc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usb_data,
+ .dma_mask = &usb_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ },
+ .resource = usb_resources,
+ .num_resources = ARRAY_SIZE(usb_resources),
+};
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+static struct otg_transceiver *xceiv;
+
+struct otg_transceiver *otg_get_transceiver(void)
+{
+ if (xceiv)
+ get_device(xceiv->dev);
+ return xceiv;
+}
+EXPORT_SYMBOL(otg_get_transceiver);
+
+int otg_set_transceiver(struct otg_transceiver *x)
+{
+ if (xceiv && x)
+ return -EBUSY;
+ xceiv = x;
+ return 0;
+}
+EXPORT_SYMBOL(otg_set_transceiver);
+
+#endif
+
+void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+{
+ usb_data.power = mA / 2;
+ usb_data.potpgt = potpgt_msec / 2;
+ platform_device_register(&usb_dev);
+}
+
+#else
+
+void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+{
+}
+
+#endif /* CONFIG_USB_MUSB_HDRC */
+
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 65cc7c27191..c7bc7fbb11a 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -14,10 +14,10 @@
#include <linux/interrupt.h>
#include <linux/serial_8250.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index 53748f5462e..c52e3047a7e 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -23,9 +23,9 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/page.h>
static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index ea8549bfbef..5a1b8c05c95 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -88,6 +88,20 @@ config MACH_TS72XX
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
+choice
+ prompt "Select a UART for early kernel messages"
+
+config EP93XX_EARLY_UART1
+ bool "UART1"
+
+config EP93XX_EARLY_UART2
+ bool "UART2"
+
+config EP93XX_EARLY_UART3
+ bool "UART3"
+
+endchoice
+
endmenu
endif
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index aa1fb352fb8..561db73ec1a 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data adssphere_eth_data = {
.phy_id = 1,
};
-static struct resource adssphere_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device adssphere_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &adssphere_eth_data,
- },
- .num_resources = 2,
- .resource = adssphere_eth_resource,
-};
-
static void __init adssphere_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&adssphere_flash);
- memcpy(adssphere_eth_data.dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- platform_device_register(&adssphere_eth_device);
+ ep93xx_register_eth(&adssphere_eth_data, 1);
}
MACHINE_START(ADSSPHERE, "ADS Sphere board")
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6062e47f204..8c9f2491dcc 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -15,9 +15,9 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/string.h>
+#include <linux/io.h>
#include <asm/div64.h>
#include <mach/hardware.h>
-#include <asm/io.h>
struct clk {
char *name;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f99f4366939..de53f0be71b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -32,6 +32,7 @@
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
+#include <linux/io.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -41,7 +42,6 @@
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/pgtable.h>
-#include <asm/io.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -157,7 +157,7 @@ static unsigned char gpio_int_type2[3];
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
void ep93xx_gpio_update_int_params(unsigned port)
{
@@ -192,8 +192,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- desc = irq_desc + gpio_irq;
- desc_handle_irq(gpio_irq, desc);
+ generic_handle_irq(gpio_irq);
}
}
@@ -202,7 +201,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
desc = irq_desc + gpio_irq;
- desc_handle_irq(gpio_irq, desc);
+ generic_handle_irq(gpio_irq);
}
}
}
@@ -217,7 +216,7 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
- desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+ generic_handle_irq(gpio_irq);
}
static void ep93xx_gpio_irq_ack(unsigned int irq)
@@ -461,6 +460,41 @@ static struct platform_device ep93xx_ohci_device = {
.resource = ep93xx_ohci_resources,
};
+static struct ep93xx_eth_data ep93xx_eth_data;
+
+static struct resource ep93xx_eth_resource[] = {
+ {
+ .start = EP93XX_ETHERNET_PHYS_BASE,
+ .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_ETHERNET,
+ .end = IRQ_EP93XX_ETHERNET,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device ep93xx_eth_device = {
+ .name = "ep93xx-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_eth_data,
+ },
+ .num_resources = ARRAY_SIZE(ep93xx_eth_resource),
+ .resource = ep93xx_eth_resource,
+};
+
+void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
+{
+ if (copy_addr) {
+ memcpy(data->dev_addr,
+ (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+ }
+
+ ep93xx_eth_data = *data;
+ platform_device_register(&ep93xx_eth_device);
+}
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 97550c0ad7b..e4add5bdccf 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -43,10 +43,16 @@ static struct platform_device edb9302_flash = {
.resource = &edb9302_flash_resource,
};
+static struct ep93xx_eth_data edb9302_eth_data = {
+ .phy_id = 1,
+};
+
static void __init edb9302_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9302_flash);
+
+ ep93xx_register_eth(&edb9302_eth_data, 1);
}
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 99b01d44bf1..02c4405afed 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data edb9302a_eth_data = {
.phy_id = 1,
};
-static struct resource edb9302a_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device edb9302a_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &edb9302a_eth_data,
- },
- .num_resources = 2,
- .resource = edb9302a_eth_resource,
-};
-
static void __init edb9302a_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9302a_flash);
- memcpy(edb9302a_eth_data.dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- platform_device_register(&edb9302a_eth_device);
+ ep93xx_register_eth(&edb9302a_eth_data, 1);
}
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index 9fb72d01a36..040edbd2ea0 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data edb9307_eth_data = {
.phy_id = 1,
};
-static struct resource edb9307_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device edb9307_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &edb9307_eth_data,
- },
- .num_resources = 2,
- .resource = edb9307_eth_resource,
-};
-
static void __init edb9307_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9307_flash);
- memcpy(edb9307_eth_data.dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- platform_device_register(&edb9307_eth_device);
+ ep93xx_register_eth(&edb9307_eth_data, 1);
}
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index 87267a574f5..6853e302bc3 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -19,7 +19,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -44,10 +44,16 @@ static struct platform_device edb9312_flash = {
.resource = &edb9312_flash_resource,
};
+static struct ep93xx_eth_data edb9312_eth_data = {
+ .phy_id = 1,
+};
+
static void __init edb9312_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9312_flash);
+
+ ep93xx_register_eth(&edb9312_eth_data, 1);
}
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 7e373950be4..9469b350d25 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -43,10 +43,16 @@ static struct platform_device edb9315_flash = {
.resource = &edb9315_flash_resource,
};
+static struct ep93xx_eth_data edb9315_eth_data = {
+ .phy_id = 1,
+};
+
static void __init edb9315_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9315_flash);
+
+ ep93xx_register_eth(&edb9315_eth_data, 1);
}
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 08a7c9bfb68..584457ce7c8 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -47,36 +47,12 @@ static struct ep93xx_eth_data edb9315a_eth_data = {
.phy_id = 1,
};
-static struct resource edb9315a_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device edb9315a_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &edb9315a_eth_data,
- },
- .num_resources = 2,
- .resource = edb9315a_eth_resource,
-};
-
static void __init edb9315a_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9315a_flash);
- memcpy(edb9315a_eth_data.dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- platform_device_register(&edb9315a_eth_device);
+ ep93xx_register_eth(&edb9315a_eth_data, 1);
}
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9b41ec1f089..035b24e31b6 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -18,7 +18,7 @@
#include <linux/ioport.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -44,36 +44,15 @@ static struct platform_device gesbc9312_flash = {
};
static struct ep93xx_eth_data gesbc9312_eth_data = {
- .phy_id = 1,
-};
-
-static struct resource gesbc9312_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device gesbc9312_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &gesbc9312_eth_data,
- },
- .num_resources = 2,
- .resource = gesbc9312_eth_resource,
+ .phy_id = 1,
};
static void __init gesbc9312_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&gesbc9312_flash);
- platform_device_register(&gesbc9312_eth_device);
+
+ ep93xx_register_eth(&gesbc9312_eth_data, 0);
}
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 0f3fb87ca4b..482cf3d2fbc 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -16,9 +16,9 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/seq_file.h>
+#include <linux/io.h>
#include <mach/ep93xx-regs.h>
-#include <asm/io.h>
#include <asm/gpio.h>
struct ep93xx_gpio_chip {
@@ -141,10 +141,10 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
- EP93XX_GPIO_BANK("C", 0x30, 0x34, 40),
+ EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
- EP93XX_GPIO_BANK("F", 0x08, 0x18, 16),
+ EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
};
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 9f4458c8e07..22d6c9a6e4c 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -6,6 +6,40 @@
#define __ASM_ARCH_EP93XX_REGS_H
/*
+ * EP93xx Physical Memory Map:
+ *
+ * The ASDO pin is sampled at system reset to select a synchronous or
+ * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
+ * the synchronous boot mode is selected. When ASDO is "0" (i.e
+ * pulled-down) the asynchronous boot mode is selected.
+ *
+ * In synchronous boot mode nSDCE3 is decoded starting at physical address
+ * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
+ * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
+ * decoded at 0xf0000000.
+ *
+ * There is known errata for the EP93xx dealing with External Memory
+ * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
+ * Guidelines" for more information. This document can be found at:
+ *
+ * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+
+#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
+#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
+#define EP93XX_CS1_PHYS_BASE 0x10000000
+#define EP93XX_CS2_PHYS_BASE 0x20000000
+#define EP93XX_CS3_PHYS_BASE 0x30000000
+#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
+#define EP93XX_CS6_PHYS_BASE 0x60000000
+#define EP93XX_CS7_PHYS_BASE 0x70000000
+#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
+#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
+#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
+#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
+#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
+
+/*
* EP93xx linux memory map:
*
* virt phys size
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index b5c182473f5..db2489d3bda 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,17 +4,17 @@
#ifndef __ASSEMBLY__
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
struct ep93xx_eth_data
{
unsigned char dev_addr[6];
unsigned char phy_id;
};
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 30b318aa1a1..34ddec081c4 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,7 @@
#ifndef __ASSEMBLY__
-#include <asm/io.h>
+#include <linux/io.h>
static inline int board_is_ts7200(void)
{
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index 1fd2f17de32..16026c2b1c8 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -31,10 +31,19 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
*((volatile unsigned int *)ptr) = value;
}
-
-#define PHYS_UART1_DATA 0x808c0000
-#define PHYS_UART1_FLAG 0x808c0018
-#define UART1_FLAG_TXFF 0x20
+#if defined(CONFIG_EP93XX_EARLY_UART1)
+#define UART_BASE EP93XX_UART1_PHYS_BASE
+#elif defined(CONFIG_EP93XX_EARLY_UART2)
+#define UART_BASE EP93XX_UART2_PHYS_BASE
+#elif defined(CONFIG_EP93XX_EARLY_UART3)
+#define UART_BASE EP93XX_UART3_PHYS_BASE
+#else
+#define UART_BASE EP93XX_UART1_PHYS_BASE
+#endif
+
+#define PHYS_UART_DATA (UART_BASE + 0x00)
+#define PHYS_UART_FLAG (UART_BASE + 0x18)
+#define UART_FLAG_TXFF 0x20
static inline void putc(int c)
{
@@ -42,11 +51,11 @@ static inline void putc(int c)
for (i = 0; i < 1000; i++) {
/* Transmit fifo not full? */
- if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+ if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
break;
}
- __raw_writeb(c, PHYS_UART1_DATA);
+ __raw_writeb(c, PHYS_UART_DATA);
}
static inline void flush(void)
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index de047a5c811..c2197236b63 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -16,10 +16,9 @@
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
-
+#include <linux/io.h>
#include <linux/mtd/physmap.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
@@ -29,38 +28,9 @@ static struct ep93xx_eth_data micro9_eth_data = {
.phy_id = 0x1f,
};
-static struct resource micro9_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device micro9_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &micro9_eth_data,
- },
- .num_resources = ARRAY_SIZE(micro9_eth_resource),
- .resource = micro9_eth_resource,
-};
-
-static void __init micro9_eth_init(void)
-{
- memcpy(micro9_eth_data.dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- platform_device_register(&micro9_eth_device);
-}
-
static void __init micro9_init(void)
{
- micro9_eth_init();
+ ep93xx_register_eth(&micro9_eth_data, 1);
}
/*
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c3cbff126d0..b4aa4c05427 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -19,7 +19,7 @@
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/m48t86.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -161,28 +161,6 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
.phy_id = 1,
};
-static struct resource ts72xx_eth_resource[] = {
- {
- .start = EP93XX_ETHERNET_PHYS_BASE,
- .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_EP93XX_ETHERNET,
- .end = IRQ_EP93XX_ETHERNET,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device ts72xx_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &ts72xx_eth_data,
- },
- .num_resources = 2,
- .resource = ts72xx_eth_resource,
-};
-
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
@@ -190,9 +168,7 @@ static void __init ts72xx_init_machine(void)
platform_device_register(&ts72xx_flash);
platform_device_register(&ts72xx_rtc_device);
- memcpy(ts72xx_eth_data.dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- platform_device_register(&ts72xx_eth_device);
+ ep93xx_register_eth(&ts72xx_eth_data, 1);
}
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index c261472208c..6a5b437ab86 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -9,9 +9,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/screen_info.h>
+#include <linux/io.h>
#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index b08ab507c05..818014e09f4 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -13,11 +13,11 @@
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/hardware/dec21285.h>
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index d0dc51e8133..d4c1e526f59 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -16,8 +16,8 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index 1f9b09b8ed8..b653e9cfa3f 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -11,9 +11,9 @@
* ISA DMA controllers.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/dma.h>
-#include <asm/io.h>
#include <asm/scatterlist.h>
#include <asm/mach/dma.h>
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index e9cae99dd1f..6ae2f1a07ab 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -42,10 +42,6 @@ extern unsigned long __bus_to_virt(unsigned long);
#endif
-/* Task size and page offset at 3GB */
-#define TASK_SIZE UL(0xbf000000)
-#define PAGE_OFFSET UL(0xc0000000)
-
/*
* Cache flushing area.
*/
@@ -56,12 +52,6 @@ extern unsigned long __bus_to_virt(unsigned long);
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
#define FLUSH_BASE_PHYS 0x50000000
#endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 01c9f407f49..2db7f36bd6c 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -7,8 +7,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 7132e522c36..54fec9ae28b 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -18,13 +18,13 @@
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/dec21285.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
static void isa_mask_pic_lo_irq(unsigned int irq)
@@ -94,8 +94,7 @@ isa_irq_handler(unsigned int irq, struct irq_desc *desc)
return;
}
- desc = irq_desc + isa_irq;
- desc_handle_irq(isa_irq, desc);
+ generic_handle_irq(isa_irq);
}
static struct irqaction irq_cascade = {
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index a764e01d357..0c8390082fa 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -7,8 +7,8 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index a1f381c64a3..00b0ddcac28 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -10,9 +10,9 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index 004819ea85c..cd1b54ff9fe 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -22,9 +22,9 @@
#include <linux/sched.h>
#include <linux/mc146818rtc.h>
#include <linux/bcd.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/time.h>
#include "common.h"
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index b5f9741ae13..7a261482821 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -18,11 +18,11 @@
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/dma.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -104,14 +104,12 @@ h720x_gpio_handler(unsigned int mask, unsigned int irq,
struct irq_desc *desc)
{
IRQDBG("%s irq: %d\n", __func__, irq);
- desc = irq_desc + irq;
while (mask) {
if (mask & 1) {
IRQDBG("handling irq %d\n", irq);
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
irq++;
- desc++;
mask >>= 1;
}
}
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 53e1f62f2e7..fd33a19c813 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -120,12 +120,10 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
mask >>= 1;
irq = IRQ_TIMER1;
- desc = irq_desc + irq;
while (mask) {
if (mask & 1)
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
irq++;
- desc++;
mask >>= 1;
}
}
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 4b4230db376..7ec60fc9156 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -21,8 +21,8 @@
#include <linux/list.h>
#include <linux/math64.h>
#include <linux/err.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/imx-regs.h>
/*
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
index eb8d5bd05d5..67812c5ac1f 100644
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -111,6 +111,11 @@
/* decode irq number to use with IMR(x), ISR(x) and friends */
#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+/* all normal IRQs can be FIQs */
+#define FIQ_START 0
+/* switch betwean IRQ and FIQ */
+extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
+
#define NR_IRQS (IRQ_GPIOD(32) + 1)
#define IRQ_GPIO(x)
#endif
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 798f221eb3b..531b95deadc 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -26,20 +26,17 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/timer.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
/*
*
* We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts. FIXME- We should
- * also add support for the accelerated interrupt controller
- * by putting offets to irq jump code in the appropriate
- * places.
+ * to turn on/off specific interrupts.
*
*/
@@ -102,6 +99,28 @@ imx_unmask_irq(unsigned int irq)
__raw_writel(irq, IMX_AITC_INTENNUM);
}
+#ifdef CONFIG_FIQ
+int imx_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+ unsigned int irqt;
+
+ if (irq >= IMX_IRQS)
+ return -EINVAL;
+
+ if (irq < IMX_IRQS / 2) {
+ irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
+ } else {
+ irq -= IMX_IRQS / 2;
+ irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_set_irq_fiq);
+#endif /* CONFIG_FIQ */
+
static int
imx_gpio_irq_type(unsigned int _irq, unsigned int type)
{
@@ -182,14 +201,12 @@ static void
imx_gpio_handler(unsigned int mask, unsigned int irq,
struct irq_desc *desc)
{
- desc = irq_desc + irq;
while (mask) {
if (mask & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
irq++;
- desc++;
mask >>= 1;
}
}
@@ -286,4 +303,9 @@ imx_init_irq(void)
/* Release masking of interrupts according to priority */
__raw_writel(-1, IMX_AITC_NIMASK);
+
+#ifdef CONFIG_FIQ
+ /* Initialize FIQ */
+ init_FIQ();
+#endif
}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index af81621f689..1d48f2762cb 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,9 +13,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/system.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include "leds.h"
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 08be3875c59..a11765f5f23 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -18,9 +18,9 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 8bacf6d4d09..595b7392ee4 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -19,10 +19,10 @@
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/hardware/arm_timer.h>
#include <mach/cm.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 7c49d55e6b2..e4f72d202cc 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -17,9 +17,9 @@
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 3c8383dbe9e..172299a7830 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -20,8 +20,8 @@
#include <linux/mm.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/hardware/icst525.h>
#include <mach/lm.h>
#include <mach/impd1.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 6e472b5f8f2..8138a7e2456 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -27,9 +27,9 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 6b99e9c258b..88026ccd5ac 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -19,9 +19,9 @@
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -217,8 +217,7 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc)
irq += IRQ_SIC_START;
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
} while (status);
}
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 7bc6881434e..8dcc823f413 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -24,9 +24,9 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 9f2b1ea8fb2..f1d72b22545 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,9 +27,9 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index e8b59d8f1bb..b82602d529b 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -7,9 +7,6 @@
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
-#define TASK_SIZE UL(0x3f000000)
-#define PAGE_OFFSET UL(0x40000000)
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
#ifndef __ASSEMBLY__
@@ -29,32 +26,52 @@
/* RAM has 1:1 mapping on the PCIe/x Busses */
#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
+#define __bus_to_virt(x) (__phys_to_virt(x))
-#define virt_to_lbus(x) \
-(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \
-((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \
-((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
-((x) - PAGE_OFFSET + PHYS_OFFSET))
+static inline dma_addr_t __virt_to_lbus(unsigned long x)
+{
+ return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
+}
-#define lbus_to_virt(x) \
-(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
-((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
-((x) - PHYS_OFFSET + PAGE_OFFSET))
+static inline unsigned long __lbus_to_virt(dma_addr_t x)
+{
+ return x + IOP13XX_PMMR_VIRT_MEM_BASE - IOP13XX_PMMR_PHYS_MEM_BASE;
+}
+
+#define __is_lbus_dma(a) \
+ ((a) >= IOP13XX_PMMR_P_START && (a) < IOP13XX_PMMR_P_END)
+
+#define __is_lbus_virt(a) \
+ ((a) >= IOP13XX_PMMR_V_START && (a) < IOP13XX_PMMR_V_END)
/* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) (dev &&\
- (strncmp(dev->bus->name, "platform", 8) == 0))
+#define is_lbus_device(dev) \
+ (dev && strncmp(dev->bus->name, "platform", 8) == 0)
-#define __arch_page_to_dma(dev, page) \
-({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
-(dma_addr_t)__virt_to_bus(page_address(page));})
+#define __arch_dma_to_virt(dev, addr) \
+ ({ \
+ unsigned long __virt; \
+ dma_addr_t __dma = addr; \
+ if (is_lbus_device(dev) && __is_lbus_dma(__dma)) \
+ __virt = __lbus_to_virt(__dma); \
+ else \
+ __virt = __bus_to_virt(__dma); \
+ (void *)__virt; \
+ })
-#define __arch_dma_to_virt(dev, addr) \
-({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+#define __arch_virt_to_dma(dev, addr) \
+ ({ \
+ unsigned long __virt = (unsigned long)addr; \
+ dma_addr_t __dma; \
+ if (is_lbus_device(dev) && __is_lbus_virt(__virt)) \
+ __dma = __virt_to_lbus(__virt); \
+ else \
+ __dma = __virt_to_bus(__virt); \
+ __dma; \
+ })
-#define __arch_virt_to_dma(dev, addr) \
-({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+#define __arch_page_to_dma(dev, page) \
+ __arch_virt_to_dma(dev, page_address(page))
#endif /* CONFIG_ARCH_IOP13XX */
#endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 17b5515af8b..59f42b53557 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -1,7 +1,7 @@
#ifndef _IOP13XX_PCI_H_
#define _IOP13XX_PCI_H_
+#include <linux/io.h>
#include <mach/irqs.h>
-#include <asm/io.h>
struct pci_sys_data;
struct hw_pci;
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 26cfa318142..52958099781 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,8 +18,8 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
void * __iomem __iop13xx_io(unsigned long io_addr)
{
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index 63ef1124ca5..f34b0ed8063 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -110,8 +110,7 @@ static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
do {
j = find_first_bit(&status, 32);
(write_imipr[i])(1 << j); /* write back to clear bit */
- desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
- desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i), desc);
+ generic_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i));
status = (read_imipr[i])();
} while (status);
}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index b17ccc8cb47..cfd4d2e6dac 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -18,13 +18,13 @@
*/
#include <linux/serial_8250.h>
+#include <linux/io.h>
#ifdef CONFIG_MTD_PHYSMAP
#include <linux/mtd/physmap.h>
#endif
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/hardware/iop_adma.h>
#define IOP13XX_UART_XTAL 33334000
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index 2476347ea62..c6af1e1bee3 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -21,7 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 45d61276d23..a9c2dfdb250 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,8 +25,8 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 082818aaa20..dd1cd990451 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,8 +26,9 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
+#include <asm/cputype.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -49,8 +50,7 @@ static int force_ep80219;
static int is_80219(void)
{
- extern int processor_id;
- return !!((processor_id & 0xffffffe0) == 0x69052e20);
+ return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
}
static int is_ep80219(void)
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index d735539808b..fbe27798759 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,8 +23,8 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 3173f9c5835..d2e42789972 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -30,8 +30,8 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c7d99f9fafe..d51e10cddf2 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,8 +22,8 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index af616c5f4fb..92fb44cdbca 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,8 +22,8 @@
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index 8c21870fa80..cdae24e46ee 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -17,7 +17,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index a6a4f93085f..babb2259716 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -84,64 +84,57 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
.virtual = IXP2000_CAP_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
.length = IXP2000_CAP_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_INTCTL_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
.length = IXP2000_INTCTL_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
.length = IXP2000_PCI_CREG_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
.length = IXP2000_PCI_CSR_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_MSF_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
.length = IXP2000_MSF_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_SCRATCH_RING_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
.length = IXP2000_SCRATCH_RING_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_SRAM0_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
.length = IXP2000_SRAM0_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_IO_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
.length = IXP2000_PCI_IO_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
.length = IXP2000_PCI_CFG0_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
.length = IXP2000_PCI_CFG1_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}
};
void __init ixp2000_map_io(void)
{
- /*
- * On IXP2400 CPUs we need to use MT_DEVICE_IXP2000 so that
- * XCB=101 (to avoid triggering erratum #66), and given that
- * this mode speeds up I/O accesses and we have write buffer
- * flushes in the right places anyway, it doesn't hurt to use
- * XCB=101 for all IXP2000s.
- */
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
/* Set slowport to 8-bit mode. */
@@ -311,8 +304,7 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i <= 7; i++) {
if (status & (1<<i)) {
- desc = irq_desc + i + IRQ_IXP2000_GPIO0;
- desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc);
+ generic_handle_irq(i + IRQ_IXP2000_GPIO0);
}
}
}
@@ -404,8 +396,7 @@ static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
for(i = 31; i >= 0; i--) {
if(status & (1 << i)) {
- desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
- desc_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc);
+ generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
}
}
}
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index c62ed655c1a..c84dfac1388 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -32,8 +32,8 @@
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -70,17 +70,17 @@ static struct map_desc enp2611_io_desc[] __initdata = {
.virtual = ENP2611_CALEB_VIRT_BASE,
.pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
.length = ENP2611_CALEB_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = ENP2611_PM3386_0_VIRT_BASE,
.pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
.length = ENP2611_PM3386_0_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = ENP2611_PM3386_1_VIRT_BASE,
.pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
.length = ENP2611_PM3386_1_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}
};
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
index 19d80379a3e..822f63f2f4a 100644
--- a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -41,13 +41,7 @@
* Most of the registers are clumped in 4K regions spread throughout
* the 0xc0000000 -> 0xc0100000 address range, but we just map in
* the whole range using a single 1 MB section instead of small
- * 4K pages. This has two advantages for us:
- *
- * 1) We use only one TLB entry for large number of on-chip I/O devices.
- *
- * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
- * as required per erratum #66. We accomplish this by using a
- * new MT_IXP2000_DEVICE memory type with the bits set as required.
+ * 4K pages.
*
* CAP stands for CSR Access Proxy.
*
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index c673b9ef9f6..4467c4224d7 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -25,8 +25,8 @@
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 6715b50829a..94f68ba9ea5 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -25,8 +25,8 @@
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 5a781fd9757..b0653a87159 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -25,8 +25,8 @@
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -129,10 +129,8 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
for(i = 0; i < board_irq_count; i++) {
if(ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 78a2341dee2..4a12327a09a 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -30,8 +30,8 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -79,10 +79,8 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
if (ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 03d916fbe53..60e9fd08ab8 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -24,8 +24,8 @@
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 68b4ac5b248..aa4c4420ff3 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -253,7 +253,6 @@ static void pci_handler(unsigned int irq, struct irq_desc *desc)
{
u32 pci_interrupt;
unsigned int irqno;
- struct irq_desc *int_desc;
pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
@@ -268,8 +267,7 @@ static void pci_handler(unsigned int irq, struct irq_desc *desc)
BUG();
}
- int_desc = irq_desc + irqno;
- desc_handle_irq(irqno, int_desc);
+ generic_handle_irq(irqno);
desc->chip->unmask(irq);
}
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b6e0bfa44df..f1b124a709a 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -68,11 +68,9 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
if (ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
@@ -105,11 +103,9 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
if (ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 701d60aa0ef..59022becb13 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -25,8 +25,8 @@
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 192538a0457..d816c51320c 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -25,9 +25,10 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <asm/dma-mapping.h>
-#include <asm/io.h>
+#include <asm/cputype.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/system.h>
@@ -366,15 +367,13 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
void __init ixp4xx_pci_preinit(void)
{
- unsigned long processor_id;
-
- asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
+ unsigned long cpuid = read_cpuid_id();
/*
* Determine which PCI read method to use.
* Rev 0 IXP425 requires workaround.
*/
- if (!(processor_id & 0xf) && cpu_is_ixp42x()) {
+ if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
printk("PCI: IXP42x A0 silicon detected - "
"PCI Non-Prefetch Workaround Enabled\n");
ixp4xx_pci_read = ixp4xx_pci_read_errata;
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 58bd2842a6f..7766f469456 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -28,11 +28,11 @@
#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/io.h>
#include <mach/udc.h>
#include <mach/hardware.h>
#include <asm/uaccess.h>
-#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 501dfdcc39f..e7c6386782e 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -23,11 +23,11 @@
#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/io.h>
#include <asm/gpio.h>
static struct flash_platform_data fsg_flash_data = {
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index ff8aa2393bf..51bd69c46d9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -14,18 +14,19 @@
#ifndef __ASM_ARCH_CPU_H__
#define __ASM_ARCH_CPU_H__
-extern unsigned int processor_id;
+#include <asm/cputype.h>
+
/* Processor id value in CP15 Register 0 */
#define IXP425_PROCESSOR_ID_VALUE 0x690541c0
#define IXP435_PROCESSOR_ID_VALUE 0x69054040
#define IXP465_PROCESSOR_ID_VALUE 0x69054200
#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0
-#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+#define cpu_is_ixp42x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+#define cpu_is_ixp43x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+#define cpu_is_ixp46x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
IXP465_PROCESSOR_ID_VALUE)
static inline u32 ixp4xx_read_feature_bits(void)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 9b2d2ec14c8..f4a0c1bc133 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -29,7 +30,6 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/delay.h>
static struct flash_platform_data ixdp425_flash_data = {
.map_name = "cfi_probe",
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 84b5e62a9c0..0acd95ecf27 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -28,11 +28,11 @@
#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/io.h>
#include <asm/gpio.h>
static struct flash_platform_data nas100d_flash_data = {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index a48a6655b88..bc9d920ae54 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -25,12 +25,12 @@
#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/io.h>
#include <asm/gpio.h>
static struct flash_platform_data nslu2_flash_data = {
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index c79f492072f..5db4f0bbe5e 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -48,6 +48,7 @@
struct mbus_dram_target_info kirkwood_mbus_dram_info;
+static int __initdata win_alloc_count;
static int __init cpu_win_can_remap(int win)
{
@@ -111,6 +112,8 @@ void __init kirkwood_setup_cpu_mbus(void)
setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+ win_alloc_count = 3;
+
/*
* Setup MBUS dram target info.
*/
@@ -137,3 +140,8 @@ void __init kirkwood_setup_cpu_mbus(void)
}
kirkwood_mbus_dram_info.num_cs = cs;
}
+
+void __init kirkwood_setup_sram_win(u32 base, u32 size)
+{
+ setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 189f16f3619..85cad05d8c5 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -98,7 +98,6 @@ void __init kirkwood_ehci_init(void)
* GE00
****************************************************************************/
struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
- .t_clk = KIRKWOOD_TCLK,
.dram = &kirkwood_mbus_dram_info,
};
@@ -108,6 +107,11 @@ static struct resource kirkwood_ge00_shared_resources[] = {
.start = GE00_PHYS_BASE + 0x2000,
.end = GE00_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
+ }, {
+ .name = "ge00 err irq",
+ .start = IRQ_KIRKWOOD_GE00_ERR,
+ .end = IRQ_KIRKWOOD_GE00_ERR,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -117,7 +121,7 @@ static struct platform_device kirkwood_ge00_shared = {
.dev = {
.platform_data = &kirkwood_ge00_shared_data,
},
- .num_resources = 1,
+ .num_resources = ARRAY_SIZE(kirkwood_ge00_shared_resources),
.resource = kirkwood_ge00_shared_resources,
};
@@ -201,7 +205,6 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
* SPI
****************************************************************************/
static struct orion_spi_info kirkwood_spi_plat_data = {
- .tclk = KIRKWOOD_TCLK,
};
static struct resource kirkwood_spi_resources[] = {
@@ -239,7 +242,7 @@ static struct plat_serial8250_port kirkwood_uart0_data[] = {
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = KIRKWOOD_TCLK,
+ .uartclk = 0,
}, {
},
};
@@ -283,7 +286,7 @@ static struct plat_serial8250_port kirkwood_uart1_data[] = {
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = KIRKWOOD_TCLK,
+ .uartclk = 0,
}, {
},
};
@@ -525,9 +528,23 @@ void __init kirkwood_xor1_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
+int kirkwood_tclk;
+
+int __init kirkwood_find_tclk(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+ return 200000000;
+
+ return 166666667;
+}
+
static void kirkwood_timer_init(void)
{
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
+ kirkwood_tclk = kirkwood_find_tclk();
+ orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
struct sys_timer kirkwood_timer = {
@@ -538,33 +555,62 @@ struct sys_timer kirkwood_timer = {
/*****************************************************************************
* General
****************************************************************************/
+/*
+ * Identify device ID and revision.
+ */
static char * __init kirkwood_id(void)
{
- switch (readl(DEVICE_ID) & 0x3) {
- case 0:
- return "88F6180";
- case 1:
- return "88F6192";
- case 2:
- return "88F6281";
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6281_DEV_ID) {
+ if (rev == MV88F6281_REV_Z0)
+ return "MV88F6281-Z0";
+ else if (rev == MV88F6281_REV_A0)
+ return "MV88F6281-A0";
+ else
+ return "MV88F6281-Rev-Unsupported";
+ } else if (dev == MV88F6192_DEV_ID) {
+ if (rev == MV88F6192_REV_Z0)
+ return "MV88F6192-Z0";
+ else if (rev == MV88F6192_REV_A0)
+ return "MV88F6192-A0";
+ else
+ return "MV88F6192-Rev-Unsupported";
+ } else if (dev == MV88F6180_DEV_ID) {
+ if (rev == MV88F6180_REV_A0)
+ return "MV88F6180-Rev-A0";
+ else
+ return "MV88F6180-Rev-Unsupported";
+ } else {
+ return "Device-Unknown";
}
-
- return "unknown 88F6000 variant";
}
-static int __init is_l2_writethrough(void)
+static void __init kirkwood_l2_init(void)
{
- return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH);
+#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
+ writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
+ feroceon_l2_init(1);
+#else
+ writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
+ feroceon_l2_init(0);
+#endif
}
void __init kirkwood_init(void)
{
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
- kirkwood_id(), KIRKWOOD_TCLK);
+ kirkwood_id(), kirkwood_tclk);
+ kirkwood_ge00_shared_data.t_clk = kirkwood_tclk;
+ kirkwood_spi_plat_data.tclk = kirkwood_tclk;
+ kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
+ kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
kirkwood_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
- feroceon_l2_init(is_l2_writethrough());
+ kirkwood_l2_init();
#endif
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 69cd113af03..8fa0f6a2763 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -23,10 +23,9 @@ void kirkwood_init_irq(void);
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
- int maj, int min);
-void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
- int maj, int min);
+void kirkwood_setup_sram_win(u32 base, u32 size);
+
+void kirkwood_pcie_id(u32 *dev, u32 *rev);
void kirkwood_ehci_init(void);
void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 610fb24d8ae..89d746d13fd 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -44,7 +44,6 @@ static void __init db88f6281_init(void)
kirkwood_rtc_init();
kirkwood_sata_init(&db88f6281_sata_data);
kirkwood_uart0_init();
- kirkwood_uart1_init();
}
static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index 6fd05838c72..ffab89f21c1 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -50,6 +50,7 @@
#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39
#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40
#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41
+#define IRQ_KIRKWOOD_GE00_ERR 46
/*
* KIRKWOOD General Purpose Pins
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 5c69992295e..eae42406fd8 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -68,6 +68,20 @@
#define L2_WRITETHROUGH 0x00000010
/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
+
+/*
* Register Map
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
index f77ef4a32c5..c923cd169b9 100644
--- a/arch/arm/mach-kirkwood/include/mach/timex.h
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -8,4 +8,3 @@
#define CLOCK_TICK_RATE (100 * HZ)
-#define KIRKWOOD_TCLK 166666667
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 2195fa31f6b..f6b08f207c8 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -18,6 +18,12 @@
#define PCIE_BASE ((void __iomem *)PCIE_VIRT_BASE)
+void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+{
+ *dev = orion_pcie_dev_id(PCIE_BASE);
+ *rev = orion_pcie_rev(PCIE_BASE);
+}
+
static int pcie_valid_config(int bus, int dev)
{
/*
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index d96487a0f18..fb8990f9770 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -90,7 +90,6 @@ static void __init rd88f6281_init(void)
kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6281_sata_data);
kirkwood_uart0_init();
- kirkwood_uart1_init();
platform_device_register(&rd88f6281_nand_flash);
}
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index c6c08e80023..7f3f24053a0 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -24,9 +24,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 3624e65cd89..9aecf0c4b8b 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -23,8 +23,8 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
@@ -72,7 +72,7 @@ int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
/* set pin as input */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- x &= ~IOPM_(pin);
+ x &= ~IOPM(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
local_irq_restore(flags);
@@ -108,7 +108,7 @@ int __init_or_module gpio_direction_input(unsigned int pin)
/* set pin as input */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- x &= ~IOPM_(pin);
+ x &= ~IOPM(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
local_irq_restore(flags);
@@ -136,14 +136,14 @@ int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
/* set line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
if (state)
- x |= (1 << pin);
+ x |= IOPD(pin);
else
- x &= ~(1 << pin);
+ x &= ~IOPD(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
/* set pin as output */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
- x |= IOPM_(pin);
+ x |= IOPM(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
local_irq_restore(flags);
@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, unsigned int state)
/* set output line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
if (state)
- x |= (1 << pin);
+ x |= IOPD(pin);
else
- x &= ~(1 << pin);
+ x &= ~IOPD(pin);
__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
local_irq_restore(flags);
@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
return -EINVAL;
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
- return (x & (1 << pin)) != 0;
+ return (x & IOPD(pin)) != 0;
}
EXPORT_SYMBOL(gpio_get_value);
@@ -240,7 +240,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
seq_printf(s, "%i:\t", i);
- seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+ seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
if (i <= KS8695_GPIO_3) {
if (ctrl & enable[i]) {
@@ -273,7 +273,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
seq_printf(s, "\t");
- seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+ seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
}
return 0;
}
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index dadbe66cb75..8fbc4c76c38 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -31,8 +31,8 @@
/* Platform-bus mapping */
extern struct bus_type platform_bus_type;
#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \
- __phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \
+ __phys_to_virt(x) : __bus_to_virt(x)); })
#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
index 0df6fe61d1c..90614a7d054 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -24,7 +24,7 @@
/* Port Mode Register */
-#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */
+#define IOPM(x) (1 << (x)) /* Mode for GPIO Pin x */
/* Port Control Register */
#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
@@ -50,6 +50,6 @@
#define IOPC_TM_EDGE (6) /* Both Edge Detection */
/* Port Data Register */
-#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
+#define IOPD(x) (1 << (x)) /* Signal Level of GPIO Pin x */
#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
index 9ef409901e7..82c5f3791af 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-lan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -29,8 +29,8 @@
#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
#define KS8695_LMAL (0x18) /* MAC Station Address Low */
#define KS8695_LMAH (0x1c) /* MAC Station Address High */
-#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+#define KS8695_LMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
/* DMA Transmit Control Register */
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
index eb494ec6e95..c475bed22b8 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-wan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -29,8 +29,8 @@
#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
#define KS8695_WMAL (0x18) /* MAC Station Address Low */
#define KS8695_WMAH (0x1c) /* MAC Station Address High */
-#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+#define KS8695_WMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
/* DMA Transmit Control Register */
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index 2a6f9186905..5a9b032bdbe 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/regs-timer.h>
static void arch_idle(void)
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 0eee37a6907..9495cb4d701 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/regs-uart.h>
static void putc(char c)
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index e5e71f4dbb8..e375c1d53f8 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -24,10 +24,10 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 1746c67af17..f5ebcc0fcab 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -27,8 +27,8 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/signal.h>
#include <asm/mach/pci.h>
#include <mach/hardware.h>
@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = {
.write = ks8695_pci_writeconfig,
};
-static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
+static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
}
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 940888dffc1..69c072c2c0f 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -24,8 +24,8 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach/time.h>
#include <mach/regs-timer.h>
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 6f4c6a1798c..9be7466e346 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -40,23 +40,22 @@ config LPD7A40X_CPLD_SSP
bool
config LH7A40X_CONTIGMEM
- bool "Disable NUMA Support"
- depends on ARCH_LH7A40X
+ bool "Disable NUMA/SparseMEM Support"
help
Say Y here if your bootloader sets the SROMLL bit(s) in
the SDRAM controller, organizing memory as a contiguous
- array. This option will disable CONFIG_DISCONTIGMEM and
- force the kernel to manage all memory in one node.
+ array. This option will disable sparse memory support
+ and force the kernel to manage all memory in one node.
- Setting this option incorrectly may prevent the kernel from
- booting. It is OK to leave it N.
+ Setting this option incorrectly may prevent the kernel
+ from booting. It is OK to leave it N.
For more information, consult
<file:Documentation/arm/Sharp-LH/SDRAM>.
config LH7A40X_ONE_BANK_PER_NODE
bool "Optimize NUMA Node Tables for Size"
- depends on ARCH_LH7A40X && !LH7A40X_CONTIGMEM
+ depends on !LH7A40X_CONTIGMEM
help
Say Y here to produce compact memory node tables. By
default pairs of adjacent physical RAM banks are managed
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 551b9726182..3d7bd50b909 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -77,7 +77,7 @@ static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
irq = IRQ_KEV7A400_CPLD;
for (; mask; mask >>= 1, ++irq)
if (mask & 1)
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
void __init lh7a40x_init_board_irq (void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index e373fb8e269..cb15e5d3212 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -214,11 +214,11 @@ static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
desc->chip->ack (irq);
if ((mask & (1<<0)) == 0) /* WLAN */
- IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+ generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
#if defined (IRQ_TOUCH)
if ((mask & (1<<1)) == 0) /* Touch */
- IRQ_DISPATCH (IRQ_TOUCH);
+ generic_handle_irq(IRQ_TOUCH);
#endif
desc->chip->unmask (irq); /* Level-triggered need this */
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index 0ca20c6c83b..6ed3f6b6db7 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -15,4 +15,3 @@ extern void lh7a404_init_irq (void);
extern void lh7a40x_clcd_init (void);
extern void lh7a40x_init_board_irq (void);
-#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq))
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index f7107b4c197..1da14ff66c9 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -73,4 +73,10 @@
#endif
+/*
+ * Sparsemem version of the above
+ */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 24
+
#endif
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 0d5063ebda1..fd033bb4342 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -63,10 +63,10 @@ static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
desc->chip->ack (irq);
if ((mask & 0x1) == 0) /* WLAN */
- IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+ generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
if ((mask & 0x2) == 0) /* Touch */
- IRQ_DISPATCH (IRQ_LPD7A400_TS);
+ generic_handle_irq(IRQ_LPD7A400_TS);
desc->chip->unmask (irq); /* Level-triggered need this */
}
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index 51fbef9601b..2901d49d148 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -43,8 +43,8 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index 7fe9e06cf66..4601e425bae 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -13,9 +13,9 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/time.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index 70ca56bb6f3..0332d8f5c18 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,8 +11,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include "common.h"
/*
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index 5a487930cb2..e1f97338d5b 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 995afc4ade4..a24259133e0 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -18,6 +18,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -28,9 +30,6 @@
#include <mach/board.h>
#include <mach/msm_iomap.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3a511368a5d..604f8ade958 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -19,9 +19,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/flash.h>
-#include <asm/io.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 9de08265d97..0c8f252637e 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -13,7 +13,7 @@
*
*/
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/interrupt.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 5976200de99..7999e4ba8e2 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -18,9 +18,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/page.h>
#include <mach/msm_iomap.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 66901baf8c8..04b8d182ff8 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -19,11 +19,10 @@
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/timer.h>
-
#include <linux/irq.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
#include <mach/msm_iomap.h>
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 9f02d7dca98..2bffe9b7e9f 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -20,12 +20,11 @@
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <asm/mach/time.h>
#include <mach/msm_iomap.h>
-#include <asm/io.h>
-
#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
#define MSM_DGT_SHIFT (5)
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 4004b672a2e..311d5b0e9bc 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include "common.h"
/*
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 953a26c469c..d56a05e8356 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -285,6 +285,11 @@ static struct resource mv78xx0_ge00_shared_resources[] = {
.start = GE00_PHYS_BASE + 0x2000,
.end = GE00_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
+ }, {
+ .name = "ge err irq",
+ .start = IRQ_MV78XX0_GE_ERR,
+ .end = IRQ_MV78XX0_GE_ERR,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -294,7 +299,7 @@ static struct platform_device mv78xx0_ge00_shared = {
.dev = {
.platform_data = &mv78xx0_ge00_shared_data,
},
- .num_resources = 1,
+ .num_resources = ARRAY_SIZE(mv78xx0_ge00_shared_resources),
.resource = mv78xx0_ge00_shared_resources,
};
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index ed4a46bcd3b..fbfb2693ce6 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -26,14 +26,22 @@
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
+ bne 1001f
@ if no low interrupts set, check high interrupts
- ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- moveq \irqnr, #63
- andeqs \irqstat, \irqstat, \tmp
+ ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ mov \irqnr, #63
+ ands \irqstat, \irqstat, \tmp
+ bne 1001f
+
+ @ if no high interrupts set, check error interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_ERR_OFF]
+ mov \irqnr, #95
+ ands \irqstat, \irqstat, \tmp
@ find first active interrupt source
- clzne \irqstat, \irqstat
+1001: clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
index 995d7fb8d06..bebc330281e 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -80,9 +80,14 @@
#define IRQ_MV78XX0_DB_OUT 61
/*
+ * MV78xx0 Error Interrupt Controller
+ */
+#define IRQ_MV78XX0_GE_ERR 70
+
+/*
* MV78XX0 General Purpose Pins
*/
-#define IRQ_MV78XX0_GPIO_START 64
+#define IRQ_MV78XX0_GPIO_START 96
#define NR_GPIO_IRQS GPIO_MAX
#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index ad664178d6e..ee9c5593ee9 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -71,8 +71,10 @@
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF 0x0000
#define IRQ_CAUSE_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_ERR_OFF 0x000c
#define IRQ_MASK_LOW_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 28248d37b99..503e5d195ae 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -19,4 +19,5 @@ void __init mv78xx0_init_irq(void)
{
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
}
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
new file mode 100644
index 00000000000..c77a4b8f73b
--- /dev/null
+++ b/arch/arm/mach-mx2/devices.h
@@ -0,0 +1,15 @@
+
+extern struct platform_device mxc_gpt1;
+extern struct platform_device mxc_gpt2;
+extern struct platform_device mxc_gpt3;
+extern struct platform_device mxc_gpt4;
+extern struct platform_device mxc_gpt5;
+extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_irda_device;
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_uart_device5;
+
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4ce56ef4d8d..56e22d3ca07 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -34,6 +34,8 @@
#include <mach/iomux-mx1-mx2.h>
#include <mach/board-mx27ads.h>
+#include "devices.h"
+
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
@@ -251,12 +253,14 @@ static struct imxuart_platform_data uart_pdata[] = {
static void __init mx27ads_board_init(void)
{
- int i;
-
gpio_fec_active();
- for (i = 0; i < 6; i++)
- imx_init_uart(i, &uart_pdata[i]);
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+ mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+ mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 1028f453cfc..7f55746e259 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -28,6 +28,8 @@
#include <mach/imx-uart.h>
#include <mach/board-pcm038.h>
+#include "devices.h"
+
/*
* Phytec's phyCORE-i.MX27 comes with 32MiB flash,
* 16 bit width
@@ -170,11 +172,11 @@ static struct platform_device *platform_devices[] __initdata = {
static void __init pcm038_init(void)
{
- int i;
gpio_fec_active();
- for (i = 0; i < 3; i++)
- imx_init_uart(i, &uart_pdata[i]);
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index e31fd44f794..16debc296da 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -35,7 +35,7 @@ static struct resource uart0[] = {
},
};
-static struct platform_device mxc_uart_device0 = {
+struct platform_device mxc_uart_device0 = {
.name = "imx-uart",
.id = 0,
.resource = uart0,
@@ -54,7 +54,7 @@ static struct resource uart1[] = {
},
};
-static struct platform_device mxc_uart_device1 = {
+struct platform_device mxc_uart_device1 = {
.name = "imx-uart",
.id = 1,
.resource = uart1,
@@ -73,7 +73,7 @@ static struct resource uart2[] = {
},
};
-static struct platform_device mxc_uart_device2 = {
+struct platform_device mxc_uart_device2 = {
.name = "imx-uart",
.id = 2,
.resource = uart2,
@@ -92,7 +92,7 @@ static struct resource uart3[] = {
},
};
-static struct platform_device mxc_uart_device3 = {
+struct platform_device mxc_uart_device3 = {
.name = "imx-uart",
.id = 3,
.resource = uart3,
@@ -111,7 +111,7 @@ static struct resource uart4[] = {
},
};
-static struct platform_device mxc_uart_device4 = {
+struct platform_device mxc_uart_device4 = {
.name = "imx-uart",
.id = 4,
.resource = uart4,
@@ -130,48 +130,9 @@ static struct resource uart5[] = {
},
};
-static struct platform_device mxc_uart_device5 = {
+struct platform_device mxc_uart_device5 = {
.name = "imx-uart",
.id = 5,
.resource = uart5,
.num_resources = ARRAY_SIZE(uart5),
};
-
-/*
- * Register only those UARTs that physically exists
- */
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
-{
- switch (uart_no) {
- case 0:
- mxc_uart_device0.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device0);
- break;
- case 1:
- mxc_uart_device1.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device1);
- break;
-#ifndef CONFIG_MXC_IRDA
- case 2:
- mxc_uart_device2.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device2);
- break;
-#endif
- case 3:
- mxc_uart_device3.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device3);
- break;
- case 4:
- mxc_uart_device4.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device4);
- break;
- case 5:
- mxc_uart_device5.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device5);
- break;
- default:
- return -ENODEV;
- }
-
- return 0;
-}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index e08c6a8ac56..a6bdcc07f3c 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -36,7 +36,7 @@ static struct resource uart0[] = {
},
};
-static struct platform_device mxc_uart_device0 = {
+struct platform_device mxc_uart_device0 = {
.name = "imx-uart",
.id = 0,
.resource = uart0,
@@ -55,7 +55,7 @@ static struct resource uart1[] = {
},
};
-static struct platform_device mxc_uart_device1 = {
+struct platform_device mxc_uart_device1 = {
.name = "imx-uart",
.id = 1,
.resource = uart1,
@@ -74,7 +74,7 @@ static struct resource uart2[] = {
},
};
-static struct platform_device mxc_uart_device2 = {
+struct platform_device mxc_uart_device2 = {
.name = "imx-uart",
.id = 2,
.resource = uart2,
@@ -93,7 +93,7 @@ static struct resource uart3[] = {
},
};
-static struct platform_device mxc_uart_device3 = {
+struct platform_device mxc_uart_device3 = {
.name = "imx-uart",
.id = 3,
.resource = uart3,
@@ -112,46 +112,13 @@ static struct resource uart4[] = {
},
};
-static struct platform_device mxc_uart_device4 = {
+struct platform_device mxc_uart_device4 = {
.name = "imx-uart",
.id = 4,
.resource = uart4,
.num_resources = ARRAY_SIZE(uart4),
};
-/*
- * Register only those UARTs that physically exist
- */
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
-{
- switch (uart_no) {
- case 0:
- mxc_uart_device0.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device0);
- break;
- case 1:
- mxc_uart_device1.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device1);
- break;
- case 2:
- mxc_uart_device2.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device2);
- break;
- case 3:
- mxc_uart_device3.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device3);
- break;
- case 4:
- mxc_uart_device4.dev.platform_data = pdata;
- platform_device_register(&mxc_uart_device4);
- break;
- default:
- return -ENODEV;
- }
-
- return 0;
-}
-
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
new file mode 100644
index 00000000000..4dc03f9e600
--- /dev/null
+++ b/arch/arm/mach-mx3/devices.h
@@ -0,0 +1,6 @@
+
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 3dda1fe23cb..6e664be8cc1 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -43,7 +43,8 @@ static DEFINE_SPINLOCK(gpio_mux_lock);
*/
int mxc_iomux_mode(unsigned int pin_mode)
{
- u32 reg, field, l, mode, ret = 0;
+ u32 field, l, mode, ret = 0;
+ void __iomem *reg;
reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
field = pin_mode & 0x3;
@@ -70,7 +71,8 @@ EXPORT_SYMBOL(mxc_iomux_mode);
*/
void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
{
- u32 reg, field, l;
+ u32 field, l;
+ void __iomem *reg;
reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
field = (pin + 2) % 3;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 30d842bd4d6..0589b5cd33c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -49,7 +49,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
.virtual = AVIC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AVIC_BASE_ADDR),
.length = AVIC_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
},
};
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 60fb4e0d5ac..1be4a390c63 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -31,6 +32,8 @@
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/board-mx31ads.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
/*!
* @file mx31ads.c
@@ -84,6 +87,108 @@ static inline int mxc_init_extuart(void)
}
#endif
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+ mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+ mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+ mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* !SERIAL_IMX */
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 imr_val;
+ u32 int_valid;
+ u32 expio_irq;
+
+ imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+ int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+ u32 expio = MXC_IRQ_TO_EXPIO(irq);
+ /* mask the interrupt */
+ __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+ __raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(u32 irq)
+{
+ u32 expio = MXC_IRQ_TO_EXPIO(irq);
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(u32 irq)
+{
+ u32 expio = MXC_IRQ_TO_EXPIO(irq);
+ /* unmask the interrupt */
+ __raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+ int i;
+
+ printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+
+ /* disable the interrupt and clear the status */
+ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+ __raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+ for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
@@ -92,17 +197,17 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
.virtual = AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
.length = AIPS1_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = AIPS2_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
@@ -120,12 +225,19 @@ void __init mx31ads_map_io(void)
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
+void __init mx31ads_init_irq(void)
+{
+ mxc_init_irq();
+ mx31ads_init_expio();
+}
+
/*!
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
mxc_init_extuart();
+ mxc_init_imx_uart();
}
static void __init mx31ads_timer_init(void)
@@ -148,7 +260,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31ads_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31ads_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index d363a6e79f8..c4344007014 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -45,17 +45,17 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
.virtual = AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
.length = AIPS1_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = AIPS2_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
- .type = MT_NONSHARED_DEVICE
+ .type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index df8582a6231..11fda95c86a 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -33,6 +33,8 @@
#include <mach/iomux-mx3.h>
#include <mach/board-pcm037.h>
+#include "devices.h"
+
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
@@ -73,12 +75,12 @@ static void __init mxc_board_init(void)
mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
- imx_init_uart(0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
- imx_init_uart(2, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
}
/*
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 1b40483ea75..79df60c20e7 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,10 +22,10 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <asm/hardware/vic.h>
-#include <asm/io.h>
#include <mach/netx-regs.h>
#include <asm/mach/irq.h>
@@ -77,15 +77,12 @@ netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
stat = ((readl(NETX_DPMAS_INT_EN) &
readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
- desc = irq_desc + NETX_IRQ_HIF_CHAINED(0);
-
while (stat) {
if (stat & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
irq++;
- desc++;
stat >>= 1;
}
}
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index 27d8ef8e8e2..6c1023b8a9a 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include "netx-regs.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index 19ae0a72bea..03984943e16 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -20,8 +20,8 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <mach/netx-regs.h>
#include <mach/pfifo.h>
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index ac8e5bfed69..7c540c1f01f 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -21,9 +21,9 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/time.h>
#include <mach/netx-regs.h>
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 04c34e82fe6..32eabf5dfa4 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -21,8 +21,8 @@
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <mach/netx-regs.h>
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a22a608a7ab..b45bb3b802f 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -86,13 +86,10 @@ static void a9m9750dev_fpga_demux_handler(unsigned int irq,
while (stat != 0) {
int irqno = fls(stat) - 1;
- struct irq_desc *fpgadesc;
stat &= ~(1 << irqno);
- fpgadesc = irq_desc + FPGA_IRQ(irqno);
-
- desc_handle_irq(FPGA_IRQ(irqno), fpgadesc);
+ generic_handle_irq(FPGA_IRQ(irqno));
}
desc->chip->unmask(irq);
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index 804c3007596..5241e6a286c 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -12,13 +12,13 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/module.h>
+#include <linux/bitops.h>
#include <mach/gpio.h>
#include <mach/processor.h>
#include <mach/processor-ns9360.h>
#include <asm/bug.h>
#include <asm/types.h>
-#include <asm/bitops.h>
#include "gpio-ns9360.h"
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 5dbc3c5167c..1b12d324b08 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -11,7 +11,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
-#include <asm/io.h>
+#include <linux/io.h>
#define __REG(x) ((void __iomem __force *)(x))
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 38260d5f849..22e0eb6e9ec 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -10,7 +10,7 @@
*/
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/mach/irq.h>
#include <mach/regs-sys-common.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 213b4878710..45a01311669 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -21,6 +21,7 @@
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 5965cf09f8c..5fba2073171 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -17,8 +17,8 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/cpu.h>
@@ -201,7 +201,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
return -EINVAL;
parent = clk->parent;
- if (unlikely(parent == 0))
+ if (unlikely(parent == NULL))
return -EIO;
realrate = parent->rate;
@@ -499,7 +499,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
if (clk->flags & ALWAYS_ENABLED)
return 0;
- if (unlikely(clk->enable_reg == 0)) {
+ if (unlikely(clk->enable_reg == NULL)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
return -EINVAL;
@@ -535,7 +535,7 @@ static void omap1_clk_disable_generic(struct clk *clk)
__u16 regval16;
__u32 regval32;
- if (clk->enable_reg == 0)
+ if (clk->enable_reg == NULL)
return;
if (clk->flags & ENABLE_REG_32BIT) {
@@ -577,7 +577,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
return clk->parent->rate / (1 << dsor_exp);
}
- if(clk->round_rate != 0)
+ if (clk->round_rate != NULL)
return clk->round_rate(clk, rate);
return clk->rate;
@@ -625,7 +625,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
/* Clocks in the DSP domain need api_ck. Just assume bootloader
* has not enabled any DSP clocks */
- if ((u32)clk->enable_reg == DSP_IDLECT2) {
+ if (clk->enable_reg == DSP_IDLECT2) {
printk(KERN_INFO "Skipping reset check for DSP domain "
"clock \"%s\"\n", clk->name);
return;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 6eadf72828d..5635b511ab6 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -324,7 +324,7 @@ static struct clk dspper_ck = {
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | VIRTUAL_IO_ADDRESS,
- .enable_reg = (void __iomem *)DSP_IDLECT2,
+ .enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
@@ -338,7 +338,7 @@ static struct clk dspxor_ck = {
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_IO_ADDRESS,
- .enable_reg = (void __iomem *)DSP_IDLECT2,
+ .enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_dsp_domain,
@@ -350,7 +350,7 @@ static struct clk dsptim_ck = {
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_IO_ADDRESS,
- .enable_reg = (void __iomem *)DSP_IDLECT2,
+ .enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_dsp_domain,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ab708d4c597..e382b438c64 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -13,9 +13,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE 0xfffea000
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 4449d86095f..04995381aa5 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -21,9 +21,9 @@
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -86,7 +86,6 @@ static void fpga_mask_ack_irq(unsigned int irq)
void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
{
- struct irq_desc *d;
u32 stat;
int fpga_irq;
@@ -99,8 +98,7 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
(fpga_irq < OMAP_FPGA_IRQ_END) && stat;
fpga_irq++, stat >>= 1) {
if (stat & 1) {
- d = irq_desc + fpga_irq;
- desc_handle_irq(fpga_irq, d);
+ generic_handle_irq(fpga_irq);
}
}
}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index da13c3e8285..13083d7e692 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -14,8 +14,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 2b9750b200c..b3bd8ca8511 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -11,10 +11,10 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <asm/io.h>
#include <mach/mux.h>
#include <mach/tc.h>
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 0ec6c1ec425..9ad5197075f 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -47,8 +48,6 @@
#include <mach/gpio.h>
#include <mach/cpu.h>
-#include <asm/io.h>
-
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 610f51f1874..71fe2cc7f7c 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -12,8 +12,8 @@
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index af44eab1ed2..59abbf331a9 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,9 +13,9 @@
#include <linux/resource.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/mailbox.h>
#include <mach/irqs.h>
-#include <asm/io.h>
#define MAILBOX_ARM2DSP1 0x00
#define MAILBOX_ARM2DSP1b 0x04
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2baeaeb0c90..7de7c691558 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -103,30 +103,6 @@ static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{ }
#endif
-static int omap1_mcbsp_check(unsigned int id)
-{
- /* REVISIT: Check correctly for number of registered McBSPs */
- if (cpu_is_omap730()) {
- if (id > OMAP_MAX_MCBSP_COUNT - 2) {
- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
- id + 1);
- return -ENODEV;
- }
- return 0;
- }
-
- if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
- if (id > OMAP_MAX_MCBSP_COUNT - 1) {
- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
- id + 1);
- return -ENODEV;
- }
- return 0;
- }
-
- return -ENODEV;
-}
-
static void omap1_mcbsp_request(unsigned int id)
{
/*
@@ -151,7 +127,6 @@ static void omap1_mcbsp_free(unsigned int id)
}
static struct omap_mcbsp_ops omap1_mcbsp_ops = {
- .check = omap1_mcbsp_check,
.request = omap1_mcbsp_request,
.free = omap1_mcbsp_free,
};
@@ -160,7 +135,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
{
.phys_base = OMAP730_MCBSP1_BASE,
- .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.rx_irq = INT_730_McBSP1RX,
@@ -169,7 +143,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
},
{
.phys_base = OMAP730_MCBSP2_BASE,
- .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
.rx_irq = INT_730_McBSP2RX,
@@ -187,7 +160,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
{
.phys_base = OMAP1510_MCBSP1_BASE,
- .virt_base = OMAP1510_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.rx_irq = INT_McBSP1RX,
@@ -197,7 +169,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
},
{
.phys_base = OMAP1510_MCBSP2_BASE,
- .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
.rx_irq = INT_1510_SPI_RX,
@@ -206,7 +177,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
},
{
.phys_base = OMAP1510_MCBSP3_BASE,
- .virt_base = OMAP1510_MCBSP3_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
.rx_irq = INT_McBSP3RX,
@@ -225,7 +195,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
{
.phys_base = OMAP1610_MCBSP1_BASE,
- .virt_base = OMAP1610_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.rx_irq = INT_McBSP1RX,
@@ -235,7 +204,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
},
{
.phys_base = OMAP1610_MCBSP2_BASE,
- .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
.rx_irq = INT_1610_McBSP2_RX,
@@ -244,7 +212,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
},
{
.phys_base = OMAP1610_MCBSP3_BASE,
- .virt_base = OMAP1610_MCBSP3_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
.rx_irq = INT_McBSP3RX,
@@ -271,6 +238,18 @@ int __init omap1_mcbsp_init(void)
}
if (cpu_is_omap730())
+ omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+ if (cpu_is_omap15xx())
+ omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
+ if (cpu_is_omap16xx())
+ omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+
+ mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+ GFP_KERNEL);
+ if (!mcbsp_ptr)
+ return -ENOMEM;
+
+ if (cpu_is_omap730())
omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
OMAP730_MCBSP_PDATA_SZ);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 898516e362e..062c905c2ba 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -24,10 +24,11 @@
*/
#include <linux/module.h>
#include <linux/init.h>
-#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/spinlock.h>
+#include <asm/system.h>
+
#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 63c4ea18b1c..770d256c790 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -41,8 +41,8 @@
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0e25a996bb4..528691d5cb5 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -18,8 +18,8 @@
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/board.h>
@@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE),
- .mapbase = (unsigned long)OMAP_UART1_BASE,
+ .membase = IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = OMAP_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
- .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE),
- .mapbase = (unsigned long)OMAP_UART2_BASE,
+ .membase = IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = OMAP_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
- .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE),
- .mapbase = (unsigned long)OMAP_UART3_BASE,
+ .membase = IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = OMAP_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index e54708595ec..2cf7e32bd29 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -43,10 +43,10 @@
#include <linux/err.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index e67760189d1..705367ece17 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -44,10 +44,10 @@
#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 7069c9d536f..4832fcc7d04 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,8 +15,17 @@ config ARCH_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP24XX
+config ARCH_OMAP34XX
+ bool "OMAP34xx Based System"
+ depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+ bool "OMAP3430 support"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select ARCH_OMAP_OTG
+
comment "OMAP Board Type"
- depends on ARCH_OMAP2
+ depends on ARCH_OMAP2 || ARCH_OMAP3
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
@@ -35,3 +44,14 @@ config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
+config MACH_OMAP3_BEAGLE
+ bool "OMAP3 BEAGLE board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_LDP
+ bool "OMAP3 LDP board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OVERO
+ bool "Gumstix Overo board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 93ee990618e..c69392372c9 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,16 +4,21 @@
# Common support
obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
- devices.o serial.o gpmc.o timer-gp.o
+ devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
+ clockdomain.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
+obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
@@ -24,4 +29,7 @@ obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
+obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
+obj-$(CONFIG_MACH_OVERO) += board-overo.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index b72ca13b3ac..24688efaa44 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -34,8 +35,6 @@
#include <mach/common.h>
#include <mach/gpmc.h>
-#include <asm/io.h>
-
#define SDP2430_FLASH_CS 0
#define SDP2430_SMC91X_CS 5
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 9e2624ca70a..d4e3b6fc470 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -21,6 +21,7 @@
#include <linux/input.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -41,8 +42,6 @@
#include <mach/dma.h>
#include <mach/gpmc.h>
-#include <asm/io.h>
-
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
new file mode 100644
index 00000000000..1ea59986aa7
--- /dev/null
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -0,0 +1,86 @@
+/*
+ * linux/arch/arm/mach-omap2/board-ldp.c
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ * Nishant Kamat <nskamat@ti.com>
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-ldp.h>
+#include <mach/mcspi.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <mach/control.h>
+
+static void __init omap_ldp_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_uart_config ldp_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel ldp_config[] __initdata = {
+ { OMAP_TAG_UART, &ldp_uart_config },
+};
+
+static int __init omap_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static void __init omap_ldp_init(void)
+{
+ omap_i2c_init();
+ omap_board_config = ldp_config;
+ omap_board_config_size = ARRAY_SIZE(ldp_config);
+ omap_serial_init();
+}
+
+static void __init omap_ldp_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_LDP, "OMAP LDP board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_ldp_map_io,
+ .init_irq = omap_ldp_init_irq,
+ .init_machine = omap_ldp_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
new file mode 100644
index 00000000000..baa79674e9d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -0,0 +1,244 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3beagle.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+
+
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition omap3beagle_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data omap3beagle_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = omap3beagle_nand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .nand_setup = NULL,
+ .dev_ready = NULL,
+};
+
+static struct resource omap3beagle_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device omap3beagle_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3beagle_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3beagle_nand_resource,
+};
+
+static struct omap_uart_config omap3_beagle_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static void __init omap3_beagle_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "beagleboard::usr0",
+ .default_trigger = "heartbeat",
+ .gpio = 150,
+ },
+ {
+ .name = "beagleboard::usr1",
+ .default_trigger = "mmc0",
+ .gpio = 149,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 7,
+ .desc = "user",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_beagle_uart_config },
+ { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
+};
+
+static struct platform_device *omap3_beagle_devices[] __initdata = {
+ &omap3_beagle_lcd_device,
+ &leds_gpio,
+ &keys_gpio,
+};
+
+static void __init omap3beagle_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ omap3beagle_nand_data.cs = nandcs;
+ omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&omap3beagle_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+
+static void __init omap3_beagle_init(void)
+{
+ platform_add_devices(omap3_beagle_devices,
+ ARRAY_SIZE(omap3_beagle_devices));
+ omap_board_config = omap3_beagle_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+ omap_serial_init();
+ omap3beagle_flash_init();
+}
+
+static void __init omap3_beagle_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+ /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_beagle_map_io,
+ .init_irq = omap3_beagle_init_irq,
+ .init_machine = omap3_beagle_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
new file mode 100644
index 00000000000..e09aa59a399
--- /dev/null
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -0,0 +1,242 @@
+/*
+ * board-overo.c (Gumstix Overo)
+ *
+ * Initial code: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-overo.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/gpmc.h>
+#include <mach/hardware.h>
+#include <mach/nand.h>
+
+#define NAND_BLOCK_SIZE SZ_128K
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+static struct mtd_partition overo_nand_partitions[] = {
+ {
+ .name = "xloader",
+ .offset = 0, /* Offset = 0x00000 */
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "uboot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 14 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "uboot environment",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
+ .size = 2 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "linux",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data overo_nand_data = {
+ .parts = overo_nand_partitions,
+ .nr_parts = ARRAY_SIZE(overo_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+};
+
+static struct resource overo_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device overo_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &overo_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &overo_nand_resource,
+};
+
+
+static void __init overo_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ overo_nand_data.cs = nandcs;
+ overo_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&overo_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+static struct omap_uart_config overo_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static int __init overo_i2c_init(void)
+{
+ /* i2c2 pins are used for gpio */
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static void __init overo_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct platform_device overo_lcd_device = {
+ .name = "overo_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config overo_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel overo_config[] __initdata = {
+ { OMAP_TAG_UART, &overo_uart_config },
+ { OMAP_TAG_LCD, &overo_lcd_config },
+};
+
+static struct platform_device *overo_devices[] __initdata = {
+ &overo_lcd_device,
+};
+
+static void __init overo_init(void)
+{
+ overo_i2c_init();
+ platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
+ omap_board_config = overo_config;
+ omap_board_config_size = ARRAY_SIZE(overo_config);
+ omap_serial_init();
+ overo_flash_init();
+
+ if ((gpio_request(OVERO_GPIO_W2W_NRESET,
+ "OVERO_GPIO_W2W_NRESET") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
+ gpio_export(OVERO_GPIO_W2W_NRESET, 0);
+ gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
+ udelay(10);
+ gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
+ } else {
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_W2W_NRESET\n");
+ }
+
+ if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0))
+ gpio_export(OVERO_GPIO_BT_XGATE, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n");
+
+ if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) {
+ gpio_export(OVERO_GPIO_BT_NRESET, 0);
+ gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
+ mdelay(6);
+ gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
+ } else {
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_BT_NRESET\n");
+ }
+
+ if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0))
+ gpio_export(OVERO_GPIO_USBH_CPEN, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_USBH_CPEN\n");
+
+ if ((gpio_request(OVERO_GPIO_USBH_NRESET,
+ "OVERO_GPIO_USBH_NRESET") == 0) &&
+ (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
+ gpio_export(OVERO_GPIO_USBH_NRESET, 0);
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_USBH_NRESET\n");
+}
+
+static void __init overo_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OVERO, "Gumstix Overo")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = overo_map_io,
+ .init_irq = overo_init_irq,
+ .init_machine = overo_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1d891e4a693..ad721e0cbf7 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -21,11 +21,11 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include <asm/bitops.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
#include <mach/clock.h>
+#include <mach/clockdomain.h>
#include <mach/sram.h>
#include <mach/cpu.h>
#include <asm/div64.h>
@@ -62,10 +62,36 @@
u8 cpu_mask;
/*-------------------------------------------------------------------------
- * Omap2 specific clock functions
+ * OMAP2/3 specific clock functions
*-------------------------------------------------------------------------*/
/**
+ * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Convert a clockdomain name stored in a struct clk 'clk' into a
+ * clockdomain pointer, and save it into the struct clk. Intended to be
+ * called during clk_register(). No return value.
+ */
+void omap2_init_clk_clkdm(struct clk *clk)
+{
+ struct clockdomain *clkdm;
+
+ if (!clk->clkdm_name)
+ return;
+
+ clkdm = clkdm_lookup(clk->clkdm_name);
+ if (clkdm) {
+ pr_debug("clock: associated clk %s to clkdm %s\n",
+ clk->name, clk->clkdm_name);
+ clk->clkdm = clkdm;
+ } else {
+ pr_debug("clock: could not associate clk %s to "
+ "clkdm %s\n", clk->name, clk->clkdm_name);
+ }
+}
+
+/**
* omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
* @clk: OMAP clock struct ptr to use
*
@@ -251,7 +277,7 @@ int _omap2_clk_enable(struct clk *clk)
if (clk->enable)
return clk->enable(clk);
- if (unlikely(clk->enable_reg == 0)) {
+ if (unlikely(clk->enable_reg == NULL)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
return 0; /* REVISIT: -EINVAL */
@@ -283,7 +309,7 @@ void _omap2_clk_disable(struct clk *clk)
return;
}
- if (clk->enable_reg == 0) {
+ if (clk->enable_reg == NULL) {
/*
* 'Independent' here refers to a clock which is not
* controlled by its parent.
@@ -308,6 +334,9 @@ void omap2_clk_disable(struct clk *clk)
_omap2_clk_disable(clk);
if (likely((u32)clk->parent))
omap2_clk_disable(clk->parent);
+ if (clk->clkdm)
+ omap2_clkdm_clk_disable(clk->clkdm, clk);
+
}
}
@@ -324,11 +353,19 @@ int omap2_clk_enable(struct clk *clk)
return ret;
}
+ if (clk->clkdm)
+ omap2_clkdm_clk_enable(clk->clkdm, clk);
+
ret = _omap2_clk_enable(clk);
- if (unlikely(ret != 0) && clk->parent) {
- omap2_clk_disable(clk->parent);
- clk->usecount--;
+ if (unlikely(ret != 0)) {
+ if (clk->clkdm)
+ omap2_clkdm_clk_disable(clk->clkdm, clk);
+
+ if (clk->parent) {
+ omap2_clk_disable(clk->parent);
+ clk->usecount--;
+ }
}
}
@@ -477,7 +514,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
/* Given a clock and a rate apply a clock specific rounding function */
long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
{
- if (clk->round_rate != 0)
+ if (clk->round_rate != NULL)
return clk->round_rate(clk, rate);
if (clk->flags & RATE_FIXED)
@@ -566,7 +603,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
*/
void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
{
- if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0)))
+ if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
return NULL;
*field_mask = clk->clksel_mask;
@@ -586,7 +623,7 @@ u32 omap2_clksel_get_divisor(struct clk *clk)
void __iomem *div_addr;
div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == 0)
+ if (div_addr == NULL)
return 0;
field_val = __raw_readl(div_addr) & field_mask;
@@ -605,7 +642,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == 0)
+ if (div_addr == NULL)
return -EINVAL;
field_val = omap2_divisor_to_clksel(clk, new_div);
@@ -643,7 +680,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
- if (clk->set_rate != 0)
+ if (clk->set_rate != NULL)
ret = clk->set_rate(clk, rate);
if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
@@ -664,7 +701,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
const struct clksel_rate *clkr;
*parent_div = 0;
- *src_addr = 0;
+ *src_addr = NULL;
clks = omap2_get_clksel_by_parent(clk, src_clk);
if (clks == NULL)
@@ -705,7 +742,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
&field_mask, clk, &parent_div);
- if (src_addr == 0)
+ if (src_addr == NULL)
return -EINVAL;
if (clk->usecount > 0)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 626e5fa93b6..1fb330e0847 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,7 @@
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
@@ -36,6 +37,7 @@ void omap2_clk_disable_unused(struct clk *clk);
#endif
void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clk_clkdm(struct clk *clk);
void omap2_init_clksel_parent(struct clk *clk);
u32 omap2_clksel_get_divisor(struct clk *clk);
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 295e671e9cf..d382eb0184a 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -24,14 +24,13 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
-
#include <linux/io.h>
#include <linux/cpufreq.h>
+#include <linux/bitops.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
-#include <asm/bitops.h>
#include "memory.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index be4e25554e0..242a19d86cc 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -626,6 +626,7 @@ static struct clk func_32k_ck = {
.rate = 32000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.recalc = &propagate_rate,
};
@@ -634,17 +635,19 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.enable = &omap2_enable_osc_ck,
.disable = &omap2_disable_osc_ck,
.recalc = &omap2_osc_clk_recalc,
};
-/* With out modem likely 12MHz, with modem likely 13MHz */
+/* Without modem likely 12MHz, with modem likely 13MHz */
static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
.name = "sys_ck", /* ~ ref_clk also */
.parent = &osc_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
ALWAYS_ENABLED | RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.recalc = &omap2_sys_clk_recalc,
};
@@ -653,6 +656,7 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.recalc = &propagate_rate,
};
@@ -684,6 +688,7 @@ static struct clk dpll_ck = {
.dpll_data = &dpll_dd,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
.set_rate = &omap2_reprogram_dpllcore,
};
@@ -694,6 +699,7 @@ static struct clk apll96_ck = {
.rate = 96000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
.enable = &omap2_clk_fixed_enable,
@@ -707,6 +713,7 @@ static struct clk apll54_ck = {
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
.enable = &omap2_clk_fixed_enable,
@@ -741,6 +748,7 @@ static struct clk func_54m_ck = {
.parent = &apll54_ck, /* can also be alt_clk */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_54M_SOURCE,
@@ -753,6 +761,7 @@ static struct clk core_ck = {
.parent = &dpll_ck, /* can also be 32k */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
ALWAYS_ENABLED | RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -779,6 +788,7 @@ static struct clk func_96m_ck = {
.parent = &apll96_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP2430_96M_SOURCE,
@@ -811,6 +821,7 @@ static struct clk func_48m_ck = {
.parent = &apll96_ck, /* 96M or Alt */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_48M_SOURCE,
@@ -826,6 +837,7 @@ static struct clk func_12m_ck = {
.fixed_div = 4,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "wkup_clkdm",
.recalc = &omap2_fixed_divisor_recalc,
};
@@ -878,6 +890,7 @@ static struct clk sys_clkout_src = {
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -908,6 +921,7 @@ static struct clk sys_clkout = {
.parent = &sys_clkout_src,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "wkup_clkdm",
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
.clksel = sys_clkout_clksel,
@@ -921,6 +935,7 @@ static struct clk sys_clkout2_src = {
.name = "sys_clkout2_src",
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -942,6 +957,7 @@ static struct clk sys_clkout2 = {
.name = "sys_clkout2",
.parent = &sys_clkout2_src,
.flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "wkup_clkdm",
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
.clksel = sys_clkout2_clksel,
@@ -954,6 +970,7 @@ static struct clk emul_ck = {
.name = "emul_ck",
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
.enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
.recalc = &followparent_recalc,
@@ -990,12 +1007,13 @@ static struct clk mpu_ck = { /* Control cpu */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
ALWAYS_ENABLED | DELAYED_APP |
CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .clkdm_name = "mpu_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
.clksel = mpu_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
+ .round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate
};
@@ -1031,6 +1049,7 @@ static struct clk dsp_fck = {
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .clkdm_name = "dsp_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
@@ -1054,10 +1073,7 @@ static const struct clksel dsp_irate_ick_clksel[] = {
{ .parent = NULL }
};
-/*
- * This clock does not exist as such in the TRM, but is added to
- * separate source selection from XXX
- */
+/* This clock does not exist as such in the TRM. */
static struct clk dsp_irate_ick = {
.name = "dsp_irate_ick",
.parent = &dsp_fck,
@@ -1089,11 +1105,17 @@ static struct clk iva2_1_ick = {
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
};
+/*
+ * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
+ * the C54x, but which is contained in the DSP powerdomain. Does not
+ * exist on later OMAPs.
+ */
static struct clk iva1_ifck = {
.name = "iva1_ifck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
RATE_PROPAGATES | DELAYED_APP,
+ .clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
@@ -1109,6 +1131,7 @@ static struct clk iva1_mpu_int_ifck = {
.name = "iva1_mpu_int_ifck",
.parent = &iva1_ifck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
.fixed_div = 2,
@@ -1156,6 +1179,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
ALWAYS_ENABLED | DELAYED_APP |
CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .clkdm_name = "core_l3_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
.clksel = core_l3_clksel,
@@ -1177,11 +1201,13 @@ static const struct clksel usb_l4_ick_clksel[] = {
{ .parent = NULL },
};
+/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
static struct clk usb_l4_ick = { /* FS-USB interface clock */
.name = "usb_l4_ick",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
DELAYED_APP | CONFIG_PARTICIPANT,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
@@ -1193,10 +1219,42 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */
};
/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks. Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_24XX },
+ { .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+ { .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+ { .parent = NULL }
+};
+
+static struct clk l4_ck = { /* used both as an ick and fck */
+ .name = "l4_ck",
+ .parent = &core_l3_ck,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+ .clkdm_name = "core_l4_clkdm",
+ .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+ .clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
+ .clksel = l4_clksel,
+ .recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate
+};
+
+/*
* SSI is in L3 management domain, its direct parent is core not l3,
* many core power domain entities are grouped into the L3 clock
* domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
*
* ssr = core/1/2/3/4/5, sst = 1/2 ssr.
*/
@@ -1221,6 +1279,7 @@ static struct clk ssi_ssr_sst_fck = {
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
DELAYED_APP,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_SSI_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
@@ -1231,6 +1290,7 @@ static struct clk ssi_ssr_sst_fck = {
.set_rate = &omap2_clksel_set_rate
};
+
/*
* GFX clock domain
* Clocks:
@@ -1254,6 +1314,7 @@ static struct clk gfx_3d_fck = {
.name = "gfx_3d_fck",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_3D_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
@@ -1268,6 +1329,7 @@ static struct clk gfx_2d_fck = {
.name = "gfx_2d_fck",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_2D_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
@@ -1282,6 +1344,7 @@ static struct clk gfx_ick = {
.name = "gfx_ick", /* From l3 */
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
.recalc = &followparent_recalc,
@@ -1311,6 +1374,7 @@ static struct clk mdm_ick = { /* used both as a ick and fck */
.name = "mdm_ick",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
@@ -1325,52 +1389,13 @@ static struct clk mdm_osc_ck = {
.name = "mdm_osc_ck",
.parent = &osc_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
.enable_bit = OMAP2430_EN_OSC_SHIFT,
.recalc = &followparent_recalc,
};
/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks. Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static const struct clksel_rate l4_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel l4_clksel[] = {
- { .parent = &core_l3_ck, .rates = l4_core_l3_rates },
- { .parent = NULL }
-};
-
-static struct clk l4_ck = { /* used both as an ick and fck */
- .name = "l4_ck",
- .parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
- .clksel = l4_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk ssi_l4_ick = {
- .name = "ssi_l4_ick",
- .parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_SSI_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
* DSS clock domain
* CLOCKs:
* DSS_L4_ICLK, DSS_L3_ICLK,
@@ -1409,6 +1434,7 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
.name = "dss_ick",
.parent = &l4_ck, /* really both l3 and l4 */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
.recalc = &followparent_recalc,
@@ -1419,6 +1445,7 @@ static struct clk dss1_fck = {
.parent = &core_ck, /* Core or sys */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
DELAYED_APP,
+ .clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1451,6 +1478,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
DELAYED_APP,
+ .clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS2_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1464,6 +1492,7 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */
.name = "dss_54m_fck", /* 54m tv clk */
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_TV_SHIFT,
.recalc = &followparent_recalc,
@@ -1491,6 +1520,7 @@ static struct clk gpt1_ick = {
.name = "gpt1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
.recalc = &followparent_recalc,
@@ -1500,6 +1530,7 @@ static struct clk gpt1_fck = {
.name = "gpt1_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1515,6 +1546,7 @@ static struct clk gpt2_ick = {
.name = "gpt2_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
.recalc = &followparent_recalc,
@@ -1524,6 +1556,7 @@ static struct clk gpt2_fck = {
.name = "gpt2_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1537,6 +1570,7 @@ static struct clk gpt3_ick = {
.name = "gpt3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
.recalc = &followparent_recalc,
@@ -1546,6 +1580,7 @@ static struct clk gpt3_fck = {
.name = "gpt3_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1559,6 +1594,7 @@ static struct clk gpt4_ick = {
.name = "gpt4_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
.recalc = &followparent_recalc,
@@ -1568,6 +1604,7 @@ static struct clk gpt4_fck = {
.name = "gpt4_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1581,6 +1618,7 @@ static struct clk gpt5_ick = {
.name = "gpt5_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
.recalc = &followparent_recalc,
@@ -1590,6 +1628,7 @@ static struct clk gpt5_fck = {
.name = "gpt5_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1603,6 +1642,7 @@ static struct clk gpt6_ick = {
.name = "gpt6_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
.recalc = &followparent_recalc,
@@ -1612,6 +1652,7 @@ static struct clk gpt6_fck = {
.name = "gpt6_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1634,6 +1675,7 @@ static struct clk gpt7_fck = {
.name = "gpt7_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1647,6 +1689,7 @@ static struct clk gpt8_ick = {
.name = "gpt8_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
.recalc = &followparent_recalc,
@@ -1656,6 +1699,7 @@ static struct clk gpt8_fck = {
.name = "gpt8_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1669,6 +1713,7 @@ static struct clk gpt9_ick = {
.name = "gpt9_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
.recalc = &followparent_recalc,
@@ -1678,6 +1723,7 @@ static struct clk gpt9_fck = {
.name = "gpt9_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1691,6 +1737,7 @@ static struct clk gpt10_ick = {
.name = "gpt10_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
.recalc = &followparent_recalc,
@@ -1700,6 +1747,7 @@ static struct clk gpt10_fck = {
.name = "gpt10_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1713,6 +1761,7 @@ static struct clk gpt11_ick = {
.name = "gpt11_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
.recalc = &followparent_recalc,
@@ -1722,6 +1771,7 @@ static struct clk gpt11_fck = {
.name = "gpt11_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1735,6 +1785,7 @@ static struct clk gpt12_ick = {
.name = "gpt12_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
.recalc = &followparent_recalc,
@@ -1744,6 +1795,7 @@ static struct clk gpt12_fck = {
.name = "gpt12_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -1758,6 +1810,7 @@ static struct clk mcbsp1_ick = {
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
.recalc = &followparent_recalc,
@@ -1768,6 +1821,7 @@ static struct clk mcbsp1_fck = {
.id = 1,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
.recalc = &followparent_recalc,
@@ -1778,6 +1832,7 @@ static struct clk mcbsp2_ick = {
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
.recalc = &followparent_recalc,
@@ -1788,6 +1843,7 @@ static struct clk mcbsp2_fck = {
.id = 2,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
.recalc = &followparent_recalc,
@@ -1798,6 +1854,7 @@ static struct clk mcbsp3_ick = {
.id = 3,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
.recalc = &followparent_recalc,
@@ -1808,6 +1865,7 @@ static struct clk mcbsp3_fck = {
.id = 3,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
.recalc = &followparent_recalc,
@@ -1818,6 +1876,7 @@ static struct clk mcbsp4_ick = {
.id = 4,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
.recalc = &followparent_recalc,
@@ -1828,6 +1887,7 @@ static struct clk mcbsp4_fck = {
.id = 4,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
.recalc = &followparent_recalc,
@@ -1838,6 +1898,7 @@ static struct clk mcbsp5_ick = {
.id = 5,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
.recalc = &followparent_recalc,
@@ -1848,6 +1909,7 @@ static struct clk mcbsp5_fck = {
.id = 5,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
.recalc = &followparent_recalc,
@@ -1857,6 +1919,7 @@ static struct clk mcspi1_ick = {
.name = "mcspi_ick",
.id = 1,
.parent = &l4_ck,
+ .clkdm_name = "core_l4_clkdm",
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
@@ -1868,6 +1931,7 @@ static struct clk mcspi1_fck = {
.id = 1,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
.recalc = &followparent_recalc,
@@ -1878,6 +1942,7 @@ static struct clk mcspi2_ick = {
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
.recalc = &followparent_recalc,
@@ -1888,6 +1953,7 @@ static struct clk mcspi2_fck = {
.id = 2,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
.recalc = &followparent_recalc,
@@ -1898,6 +1964,7 @@ static struct clk mcspi3_ick = {
.id = 3,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
.recalc = &followparent_recalc,
@@ -1908,6 +1975,7 @@ static struct clk mcspi3_fck = {
.id = 3,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
.recalc = &followparent_recalc,
@@ -1917,6 +1985,7 @@ static struct clk uart1_ick = {
.name = "uart1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
.recalc = &followparent_recalc,
@@ -1926,6 +1995,7 @@ static struct clk uart1_fck = {
.name = "uart1_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
.recalc = &followparent_recalc,
@@ -1935,6 +2005,7 @@ static struct clk uart2_ick = {
.name = "uart2_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
.recalc = &followparent_recalc,
@@ -1944,6 +2015,7 @@ static struct clk uart2_fck = {
.name = "uart2_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
.recalc = &followparent_recalc,
@@ -1953,6 +2025,7 @@ static struct clk uart3_ick = {
.name = "uart3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
.recalc = &followparent_recalc,
@@ -1962,6 +2035,7 @@ static struct clk uart3_fck = {
.name = "uart3_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
.recalc = &followparent_recalc,
@@ -1971,6 +2045,7 @@ static struct clk gpios_ick = {
.name = "gpios_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
.recalc = &followparent_recalc,
@@ -1980,6 +2055,7 @@ static struct clk gpios_fck = {
.name = "gpios_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
.recalc = &followparent_recalc,
@@ -1989,6 +2065,7 @@ static struct clk mpu_wdt_ick = {
.name = "mpu_wdt_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
.recalc = &followparent_recalc,
@@ -1998,6 +2075,7 @@ static struct clk mpu_wdt_fck = {
.name = "mpu_wdt_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
.recalc = &followparent_recalc,
@@ -2006,31 +2084,40 @@ static struct clk mpu_wdt_fck = {
static struct clk sync_32k_ick = {
.name = "sync_32k_ick",
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ ENABLE_ON_INIT,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
.recalc = &followparent_recalc,
};
+
static struct clk wdt1_ick = {
.name = "wdt1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_WDT1_SHIFT,
.recalc = &followparent_recalc,
};
+
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ ENABLE_ON_INIT,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
.recalc = &followparent_recalc,
};
+
static struct clk icr_ick = {
.name = "icr_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_EN_ICR_SHIFT,
.recalc = &followparent_recalc,
@@ -2040,15 +2127,22 @@ static struct clk cam_ick = {
.name = "cam_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
.recalc = &followparent_recalc,
};
+/*
+ * cam_fck controls both CAM_MCLK and CAM_FCLK. It should probably be
+ * split into two separate clocks, since the parent clocks are different
+ * and the clockdomains are also different.
+ */
static struct clk cam_fck = {
.name = "cam_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
.recalc = &followparent_recalc,
@@ -2058,6 +2152,7 @@ static struct clk mailboxes_ick = {
.name = "mailboxes_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
.recalc = &followparent_recalc,
@@ -2067,6 +2162,7 @@ static struct clk wdt4_ick = {
.name = "wdt4_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
.recalc = &followparent_recalc,
@@ -2076,6 +2172,7 @@ static struct clk wdt4_fck = {
.name = "wdt4_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
.recalc = &followparent_recalc,
@@ -2085,6 +2182,7 @@ static struct clk wdt3_ick = {
.name = "wdt3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
.recalc = &followparent_recalc,
@@ -2094,6 +2192,7 @@ static struct clk wdt3_fck = {
.name = "wdt3_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
.recalc = &followparent_recalc,
@@ -2103,6 +2202,7 @@ static struct clk mspro_ick = {
.name = "mspro_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
.recalc = &followparent_recalc,
@@ -2112,6 +2212,7 @@ static struct clk mspro_fck = {
.name = "mspro_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
.recalc = &followparent_recalc,
@@ -2121,6 +2222,7 @@ static struct clk mmc_ick = {
.name = "mmc_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_MMC_SHIFT,
.recalc = &followparent_recalc,
@@ -2130,6 +2232,7 @@ static struct clk mmc_fck = {
.name = "mmc_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_MMC_SHIFT,
.recalc = &followparent_recalc,
@@ -2139,6 +2242,7 @@ static struct clk fac_ick = {
.name = "fac_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
.recalc = &followparent_recalc,
@@ -2148,6 +2252,7 @@ static struct clk fac_fck = {
.name = "fac_fck",
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
.recalc = &followparent_recalc,
@@ -2157,6 +2262,7 @@ static struct clk eac_ick = {
.name = "eac_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_EAC_SHIFT,
.recalc = &followparent_recalc,
@@ -2166,6 +2272,7 @@ static struct clk eac_fck = {
.name = "eac_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_EAC_SHIFT,
.recalc = &followparent_recalc,
@@ -2175,6 +2282,7 @@ static struct clk hdq_ick = {
.name = "hdq_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
.recalc = &followparent_recalc,
@@ -2184,6 +2292,7 @@ static struct clk hdq_fck = {
.name = "hdq_fck",
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
.recalc = &followparent_recalc,
@@ -2194,6 +2303,7 @@ static struct clk i2c2_ick = {
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
.recalc = &followparent_recalc,
@@ -2204,6 +2314,7 @@ static struct clk i2c2_fck = {
.id = 2,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
.recalc = &followparent_recalc,
@@ -2214,6 +2325,7 @@ static struct clk i2chs2_fck = {
.id = 2,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
.recalc = &followparent_recalc,
@@ -2224,6 +2336,7 @@ static struct clk i2c1_ick = {
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
.recalc = &followparent_recalc,
@@ -2234,6 +2347,7 @@ static struct clk i2c1_fck = {
.id = 1,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
.recalc = &followparent_recalc,
@@ -2244,6 +2358,7 @@ static struct clk i2chs1_fck = {
.id = 1,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
.recalc = &followparent_recalc,
@@ -2252,7 +2367,9 @@ static struct clk i2chs1_fck = {
static struct clk gpmc_fck = {
.name = "gpmc_fck",
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+ ENABLE_ON_INIT,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -2260,6 +2377,7 @@ static struct clk sdma_fck = {
.name = "sdma_fck",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -2267,6 +2385,7 @@ static struct clk sdma_ick = {
.name = "sdma_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -2274,6 +2393,7 @@ static struct clk vlynq_ick = {
.name = "vlynq_ick",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
.recalc = &followparent_recalc,
@@ -2308,6 +2428,7 @@ static struct clk vlynq_fck = {
.name = "vlynq_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | DELAYED_APP,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
.init = &omap2_init_clksel_parent,
@@ -2323,6 +2444,7 @@ static struct clk sdrc_ick = {
.name = "sdrc_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP2430_EN_SDRC_SHIFT,
.recalc = &followparent_recalc,
@@ -2332,6 +2454,7 @@ static struct clk des_ick = {
.name = "des_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_DES_SHIFT,
.recalc = &followparent_recalc,
@@ -2341,6 +2464,7 @@ static struct clk sha_ick = {
.name = "sha_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_SHA_SHIFT,
.recalc = &followparent_recalc,
@@ -2350,6 +2474,7 @@ static struct clk rng_ick = {
.name = "rng_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_RNG_SHIFT,
.recalc = &followparent_recalc,
@@ -2359,6 +2484,7 @@ static struct clk aes_ick = {
.name = "aes_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_AES_SHIFT,
.recalc = &followparent_recalc,
@@ -2368,6 +2494,7 @@ static struct clk pka_ick = {
.name = "pka_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_PKA_SHIFT,
.recalc = &followparent_recalc,
@@ -2377,6 +2504,7 @@ static struct clk usb_fck = {
.name = "usb_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
.recalc = &followparent_recalc,
@@ -2386,6 +2514,7 @@ static struct clk usbhs_ick = {
.name = "usbhs_ick",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_USBHS_SHIFT,
.recalc = &followparent_recalc,
@@ -2396,6 +2525,7 @@ static struct clk mmchs1_ick = {
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
.recalc = &followparent_recalc,
@@ -2406,6 +2536,7 @@ static struct clk mmchs1_fck = {
.id = 1,
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
.recalc = &followparent_recalc,
@@ -2416,6 +2547,7 @@ static struct clk mmchs2_ick = {
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
.recalc = &followparent_recalc,
@@ -2435,6 +2567,7 @@ static struct clk gpio5_ick = {
.name = "gpio5_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
.recalc = &followparent_recalc,
@@ -2444,6 +2577,7 @@ static struct clk gpio5_fck = {
.name = "gpio5_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
.recalc = &followparent_recalc,
@@ -2453,6 +2587,7 @@ static struct clk mdm_intc_ick = {
.name = "mdm_intc_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
.recalc = &followparent_recalc,
@@ -2463,6 +2598,7 @@ static struct clk mmchsdb1_fck = {
.id = 1,
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
.recalc = &followparent_recalc,
@@ -2473,6 +2609,7 @@ static struct clk mmchsdb2_fck = {
.id = 2,
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP243X,
+ .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
.recalc = &followparent_recalc,
@@ -2551,7 +2688,6 @@ static struct clk *onchip_24xx_clks[] __initdata = {
&usb_l4_ick,
/* L4 domain clocks */
&l4_ck, /* used as both core_l4 and wu_l4 */
- &ssi_l4_ick,
/* virtual meta-group clock */
&virt_prcm_set,
/* general l4 interface ck, multi-parent functional clk */
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 3ff74952f83..084e11082f8 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -25,11 +25,11 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/limits.h>
+#include <linux/bitops.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
-#include <asm/bitops.h>
#include "memory.h"
#include "clock.h"
@@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk)
static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
{
const struct dpll_data *dd;
+ u32 v;
dd = clk->dpll_data;
- cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
- dd->control_reg);
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ __raw_writel(v, dd->control_reg);
}
/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
state <<= dd->idlest_bit;
idlest_mask = 1 << dd->idlest_bit;
- while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+ while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
i < MAX_DPLL_WAIT_TRIES) {
i++;
udelay(1);
@@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
dd = clk->dpll_data;
- v = cm_read_reg(dd->autoidle_reg);
+ v = __raw_readl(dd->autoidle_reg);
v &= dd->autoidle_mask;
v >>= __ffs(dd->autoidle_mask);
@@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
static void omap3_dpll_allow_idle(struct clk *clk)
{
const struct dpll_data *dd;
+ u32 v;
if (!clk || !clk->dpll_data)
return;
@@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk)
* by writing 0x5 instead of 0x1. Add some mechanism to
* optionally enter this mode.
*/
- cm_rmw_reg_bits(dd->autoidle_mask,
- DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
- dd->autoidle_reg);
+ v = __raw_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ __raw_writel(v, dd->autoidle_reg);
}
/**
@@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk)
static void omap3_dpll_deny_idle(struct clk *clk)
{
const struct dpll_data *dd;
+ u32 v;
if (!clk || !clk->dpll_data)
return;
dd = clk->dpll_data;
- cm_rmw_reg_bits(dd->autoidle_mask,
- DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
- dd->autoidle_reg);
+ v = __raw_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ __raw_writel(v, dd->autoidle_reg);
}
/* Clock control for DPLL outputs */
@@ -482,8 +489,10 @@ int __init omap2_clk_init(void)
for (clkp = onchip_34xx_clks;
clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
clkp++) {
- if ((*clkp)->flags & cpu_clkflg)
+ if ((*clkp)->flags & cpu_clkflg) {
clk_register(*clkp);
+ omap2_init_clk_clkdm(*clkp);
+ }
}
/* REVISIT: Not yet ready for OMAP3 */
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index ec664457a11..c38a8a09692 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -478,7 +478,7 @@ static struct clk dpll3_m2_ck = {
};
static const struct clksel core_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -495,7 +495,7 @@ static struct clk core_ck = {
};
static const struct clksel dpll3_m2x2_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -541,7 +541,7 @@ static struct clk dpll3_m3x2_ck = {
};
static const struct clksel emu_core_alwon_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -633,7 +633,7 @@ static struct clk dpll4_m2x2_ck = {
};
static const struct clksel omap_96m_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -659,7 +659,7 @@ static struct clk omap_96m_fck = {
};
static const struct clksel cm_96m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -701,7 +701,7 @@ static struct clk dpll4_m3x2_ck = {
};
static const struct clksel virt_omap_54m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -911,7 +911,7 @@ static struct clk dpll5_m2_ck = {
};
static const struct clksel omap_120m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -919,13 +919,13 @@ static const struct clksel omap_120m_fck_clksel[] = {
static struct clk omap_120m_fck = {
.name = "omap_120m_fck",
.parent = &dpll5_m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
- .clksel = omap_120m_fck_clksel,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+ .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+ .clksel = omap_120m_fck_clksel,
.flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
+ .recalc = &omap2_clksel_recalc,
};
/* CM EXTERNAL CLOCK OUTPUTS */
@@ -1034,7 +1034,7 @@ static struct clk dpll1_fck = {
* called 'dpll1_fck'
*/
static const struct clksel mpu_clksel[] = {
- { .parent = &dpll1_fck, .rates = dpll_bypass_rates },
+ { .parent = &dpll1_fck, .rates = dpll_bypass_rates },
{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -1048,6 +1048,7 @@ static struct clk mpu_ck = {
.clksel = mpu_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "mpu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1075,6 +1076,8 @@ static struct clk arm_fck = {
.recalc = &omap2_clksel_recalc,
};
+/* XXX What about neon_clkdm ? */
+
/*
* REVISIT: This clock is never specifically defined in the 3430 TRM,
* although it is referenced - so this is a guess
@@ -1107,7 +1110,7 @@ static struct clk dpll2_fck = {
*/
static const struct clksel iva2_clksel[] = {
- { .parent = &dpll2_fck, .rates = dpll_bypass_rates },
+ { .parent = &dpll2_fck, .rates = dpll_bypass_rates },
{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -1123,6 +1126,7 @@ static struct clk iva2_ck = {
.clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
.clksel = iva2_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .clkdm_name = "iva2_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1137,6 +1141,7 @@ static struct clk l3_ick = {
.clksel = div2_core_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1154,6 +1159,7 @@ static struct clk l4_ick = {
.clksel = div2_l3_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1183,43 +1189,57 @@ static const struct clksel gfx_l3_clksel[] = {
{ .parent = NULL }
};
-static struct clk gfx_l3_fck = {
- .name = "gfx_l3_fck",
+/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
+static struct clk gfx_l3_ck = {
+ .name = "gfx_l3_ck",
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
+ .flags = CLOCK_IN_OMAP3430ES1,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk gfx_l3_fck = {
+ .name = "gfx_l3_fck",
+ .parent = &gfx_l3_ck,
+ .init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_l3_clksel,
- .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "gfx_3430es1_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gfx_l3_ick = {
.name = "gfx_l3_ick",
- .parent = &l3_ick,
- .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
- .enable_bit = OMAP_EN_GFX_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
+ .parent = &gfx_l3_ck,
+ .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gfx_cg1_ck = {
.name = "gfx_cg1_ck",
.parent = &gfx_l3_fck, /* REVISIT: correct? */
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_2D_SHIFT,
.flags = CLOCK_IN_OMAP3430ES1,
+ .clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gfx_cg2_ck = {
.name = "gfx_cg2_ck",
.parent = &gfx_l3_fck, /* REVISIT: correct? */
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_3D_SHIFT,
.flags = CLOCK_IN_OMAP3430ES1,
+ .clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
@@ -1252,15 +1272,18 @@ static struct clk sgx_fck = {
.clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK,
.clksel = sgx_clksel,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "sgx_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk sgx_ick = {
.name = "sgx_ick",
.parent = &l3_ick,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_SGX_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "sgx_clkdm",
.recalc = &followparent_recalc,
};
@@ -1269,9 +1292,11 @@ static struct clk sgx_ick = {
static struct clk d2d_26m_fck = {
.name = "d2d_26m_fck",
.parent = &sys_ck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_D2D_SHIFT,
.flags = CLOCK_IN_OMAP3430ES1,
+ .clkdm_name = "d2d_clkdm",
.recalc = &followparent_recalc,
};
@@ -1291,6 +1316,7 @@ static struct clk gpt10_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT10_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1304,6 +1330,7 @@ static struct clk gpt11_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT11_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1341,6 +1368,7 @@ static struct clk core_96m_fck = {
.parent = &omap_96m_fck,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1351,6 +1379,7 @@ static struct clk mmchs3_fck = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1361,6 +1390,7 @@ static struct clk mmchs2_fck = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1370,6 +1400,7 @@ static struct clk mspro_fck = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MSPRO_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1380,6 +1411,7 @@ static struct clk mmchs1_fck = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1390,16 +1422,18 @@ static struct clk i2c3_fck = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c2_fck = {
.name = "i2c_fck",
- .id = 2,
+ .id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1410,6 +1444,7 @@ static struct clk i2c1_fck = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1443,6 +1478,7 @@ static struct clk mcbsp5_fck = {
.clksel_mask = OMAP2_MCBSP5_CLKS_MASK,
.clksel = mcbsp_15_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1456,6 +1492,7 @@ static struct clk mcbsp1_fck = {
.clksel_mask = OMAP2_MCBSP1_CLKS_MASK,
.clksel = mcbsp_15_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1466,6 +1503,7 @@ static struct clk core_48m_fck = {
.parent = &omap_48m_fck,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1543,6 +1581,7 @@ static struct clk core_12m_fck = {
.parent = &omap_12m_fck,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1581,6 +1620,7 @@ static struct clk ssi_ssr_fck = {
.clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
.clksel = ssi_ssr_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1596,11 +1636,17 @@ static struct clk ssi_sst_fck = {
/* CORE_L3_ICK based clocks */
+/*
+ * XXX must add clk_enable/clk_disable for these if standard code won't
+ * handle it
+ */
static struct clk core_l3_ick = {
.name = "core_l3_ick",
.parent = &l3_ick,
+ .init = &omap2_init_clk_clkdm,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -1610,6 +1656,7 @@ static struct clk hsotgusb_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -1619,6 +1666,7 @@ static struct clk sdrc_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SDRC_SHIFT,
.flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -1627,6 +1675,7 @@ static struct clk gpmc_fck = {
.parent = &core_l3_ick,
.flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
ENABLE_ON_INIT,
+ .clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -1654,8 +1703,10 @@ static struct clk pka_ick = {
static struct clk core_l4_ick = {
.name = "core_l4_ick",
.parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1665,6 +1716,7 @@ static struct clk usbtll_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1675,6 +1727,7 @@ static struct clk mmchs3_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1685,6 +1738,7 @@ static struct clk icr_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_ICR_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1694,6 +1748,7 @@ static struct clk aes2_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_AES2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1703,6 +1758,7 @@ static struct clk sha12_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SHA12_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1712,6 +1768,7 @@ static struct clk des2_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_DES2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1722,6 +1779,7 @@ static struct clk mmchs2_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1732,6 +1790,7 @@ static struct clk mmchs1_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1741,6 +1800,7 @@ static struct clk mspro_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MSPRO_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1750,6 +1810,7 @@ static struct clk hdq_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HDQ_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1760,6 +1821,7 @@ static struct clk mcspi4_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1770,6 +1832,7 @@ static struct clk mcspi3_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1780,6 +1843,7 @@ static struct clk mcspi2_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1790,6 +1854,7 @@ static struct clk mcspi1_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1800,6 +1865,7 @@ static struct clk i2c3_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1810,6 +1876,7 @@ static struct clk i2c2_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1820,6 +1887,7 @@ static struct clk i2c1_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1829,6 +1897,7 @@ static struct clk uart2_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1838,6 +1907,7 @@ static struct clk uart1_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1847,6 +1917,7 @@ static struct clk gpt11_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_GPT11_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1856,6 +1927,7 @@ static struct clk gpt10_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_GPT10_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1866,6 +1938,7 @@ static struct clk mcbsp5_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1876,6 +1949,7 @@ static struct clk mcbsp1_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1885,6 +1959,7 @@ static struct clk fac_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES1_EN_FAC_SHIFT,
.flags = CLOCK_IN_OMAP3430ES1,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1894,6 +1969,7 @@ static struct clk mailboxes_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MAILBOXES_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1913,6 +1989,7 @@ static struct clk ssi_l4_ick = {
.parent = &l4_ick,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1922,6 +1999,7 @@ static struct clk ssi_ick = {
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SSI_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1996,7 +2074,7 @@ static struct clk des1_ick = {
/* DSS */
static const struct clksel dss1_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -2011,33 +2089,40 @@ static struct clk dss1_alwon_fck = {
.clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.clksel = dss1_alwon_fck_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "dss_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
.parent = &omap_54m_fck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss_96m_fck = {
.name = "dss_96m_fck",
.parent = &omap_96m_fck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss2_alwon_fck = {
.name = "dss2_alwon_fck",
.parent = &sys_ck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
@@ -2045,16 +2130,18 @@ static struct clk dss_ick = {
/* Handles both L3 and L4 clocks */
.name = "dss_ick",
.parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
/* CAM */
static const struct clksel cam_mclk_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
+ { .parent = &sys_ck, .rates = dpll_bypass_rates },
{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
{ .parent = NULL }
};
@@ -2069,24 +2156,19 @@ static struct clk cam_mclk = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "cam_clkdm",
.recalc = &omap2_clksel_recalc,
};
-static struct clk cam_l3_ick = {
- .name = "cam_l3_ick",
- .parent = &l3_ick,
- .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
- .enable_bit = OMAP3430_EN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
- .recalc = &followparent_recalc,
-};
-
-static struct clk cam_l4_ick = {
- .name = "cam_l4_ick",
+static struct clk cam_ick = {
+ /* Handles both L3 and L4 clocks */
+ .name = "cam_ick",
.parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "cam_clkdm",
.recalc = &followparent_recalc,
};
@@ -2095,45 +2177,45 @@ static struct clk cam_l4_ick = {
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
.parent = &omap_120m_fck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
.parent = &omap_48m_fck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
-static struct clk usbhost_l3_ick = {
- .name = "usbhost_l3_ick",
- .parent = &l3_ick,
- .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
- .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
- .recalc = &followparent_recalc,
-};
-
-static struct clk usbhost_l4_ick = {
- .name = "usbhost_l4_ick",
+static struct clk usbhost_ick = {
+ /* Handles both L3 and L4 clocks */
+ .name = "usbhost_ick",
.parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbhost_sar_fck = {
.name = "usbhost_sar_fck",
.parent = &osc_sys_ck,
+ .init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
.enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
@@ -2175,6 +2257,7 @@ static struct clk usim_fck = {
.recalc = &omap2_clksel_recalc,
};
+/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
static struct clk gpt1_fck = {
.name = "gpt1_fck",
.init = &omap2_init_clksel_parent,
@@ -2184,13 +2267,16 @@ static struct clk gpt1_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT1_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk wkup_32k_fck = {
.name = "wkup_32k_fck",
+ .init = &omap2_init_clk_clkdm,
.parent = &omap_32k_fck,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2200,6 +2286,7 @@ static struct clk gpio1_fck = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2209,6 +2296,7 @@ static struct clk wdt2_fck = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_WDT2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2216,6 +2304,7 @@ static struct clk wkup_l4_ick = {
.name = "wkup_l4_ick",
.parent = &sys_ck,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2227,6 +2316,7 @@ static struct clk usim_ick = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT,
.flags = CLOCK_IN_OMAP3430ES2,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2236,6 +2326,7 @@ static struct clk wdt2_ick = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2245,6 +2336,7 @@ static struct clk wdt1_ick = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2254,6 +2346,7 @@ static struct clk gpio1_ick = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2263,15 +2356,18 @@ static struct clk omap_32ksync_ick = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_32KSYNC_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
+/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_ick = {
.name = "gpt12_ick",
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT12_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2281,6 +2377,7 @@ static struct clk gpt1_ick = {
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT1_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2291,16 +2388,20 @@ static struct clk gpt1_ick = {
static struct clk per_96m_fck = {
.name = "per_96m_fck",
.parent = &omap_96m_alwon_fck,
+ .init = &omap2_init_clk_clkdm,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk per_48m_fck = {
.name = "per_48m_fck",
.parent = &omap_48m_fck,
+ .init = &omap2_init_clk_clkdm,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2310,6 +2411,7 @@ static struct clk uart3_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_UART3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2322,6 +2424,7 @@ static struct clk gpt2_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT2_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2334,6 +2437,7 @@ static struct clk gpt3_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT3_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2346,6 +2450,7 @@ static struct clk gpt4_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT4_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2358,6 +2463,7 @@ static struct clk gpt5_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT5_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2370,6 +2476,7 @@ static struct clk gpt6_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT6_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2382,6 +2489,7 @@ static struct clk gpt7_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT7_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2394,6 +2502,7 @@ static struct clk gpt8_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT8_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2406,12 +2515,14 @@ static struct clk gpt9_fck = {
.clksel_mask = OMAP3430_CLKSEL_GPT9_MASK,
.clksel = omap343x_gpt_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk per_32k_alwon_fck = {
.name = "per_32k_alwon_fck",
.parent = &omap_32k_fck,
+ .clkdm_name = "per_clkdm",
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
};
@@ -2422,6 +2533,7 @@ static struct clk gpio6_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2431,6 +2543,7 @@ static struct clk gpio5_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2440,6 +2553,7 @@ static struct clk gpio4_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2449,6 +2563,7 @@ static struct clk gpio3_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2458,6 +2573,7 @@ static struct clk gpio2_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2467,6 +2583,7 @@ static struct clk wdt3_fck = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_WDT3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2475,6 +2592,7 @@ static struct clk per_l4_ick = {
.parent = &l4_ick,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2484,6 +2602,7 @@ static struct clk gpio6_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2493,6 +2612,7 @@ static struct clk gpio5_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2502,6 +2622,7 @@ static struct clk gpio4_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2511,6 +2632,7 @@ static struct clk gpio3_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2520,6 +2642,7 @@ static struct clk gpio2_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2529,6 +2652,7 @@ static struct clk wdt3_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2538,6 +2662,7 @@ static struct clk uart3_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_UART3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2547,6 +2672,7 @@ static struct clk gpt9_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT9_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2556,6 +2682,7 @@ static struct clk gpt8_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT8_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2565,6 +2692,7 @@ static struct clk gpt7_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT7_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2574,6 +2702,7 @@ static struct clk gpt6_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2583,6 +2712,7 @@ static struct clk gpt5_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2592,6 +2722,7 @@ static struct clk gpt4_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2601,6 +2732,7 @@ static struct clk gpt3_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2610,6 +2742,7 @@ static struct clk gpt2_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2620,6 +2753,7 @@ static struct clk mcbsp2_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2630,6 +2764,7 @@ static struct clk mcbsp3_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@@ -2640,12 +2775,13 @@ static struct clk mcbsp4_ick = {
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static const struct clksel mcbsp_234_clksel[] = {
{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
- { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
+ { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};
@@ -2659,6 +2795,7 @@ static struct clk mcbsp2_fck = {
.clksel_mask = OMAP2_MCBSP2_CLKS_MASK,
.clksel = mcbsp_234_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2672,6 +2809,7 @@ static struct clk mcbsp3_fck = {
.clksel_mask = OMAP2_MCBSP3_CLKS_MASK,
.clksel = mcbsp_234_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2685,6 +2823,7 @@ static struct clk mcbsp4_fck = {
.clksel_mask = OMAP2_MCBSP4_CLKS_MASK,
.clksel = mcbsp_234_clksel,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2732,6 +2871,7 @@ static struct clk emu_src_ck = {
.clksel_mask = OMAP3430_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2755,6 +2895,7 @@ static struct clk pclk_fck = {
.clksel_mask = OMAP3430_CLKSEL_PCLK_MASK,
.clksel = pclk_emu_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2777,6 +2918,7 @@ static struct clk pclkx2_fck = {
.clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK,
.clksel = pclkx2_emu_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2792,6 +2934,7 @@ static struct clk atclk_fck = {
.clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK,
.clksel = atclk_emu_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2802,6 +2945,7 @@ static struct clk traceclk_src_fck = {
.clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+ .clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2824,6 +2968,7 @@ static struct clk traceclk_fck = {
.clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK,
.clksel = traceclk_clksel,
.flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+ .clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2853,11 +2998,13 @@ static struct clk sr_l4_ick = {
.name = "sr_l4_ick",
.parent = &l4_ick,
.flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
/* SECURE_32K_FCK clocks */
+/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.parent = &secure_32k_fck,
@@ -2933,6 +3080,7 @@ static struct clk *onchip_34xx_clks[] __initdata = {
&l3_ick,
&l4_ick,
&rm_ick,
+ &gfx_l3_ck,
&gfx_l3_fck,
&gfx_l3_ick,
&gfx_cg1_ck,
@@ -3014,12 +3162,10 @@ static struct clk *onchip_34xx_clks[] __initdata = {
&dss2_alwon_fck,
&dss_ick,
&cam_mclk,
- &cam_l3_ick,
- &cam_l4_ick,
+ &cam_ick,
&usbhost_120m_fck,
&usbhost_48m_fck,
- &usbhost_l3_ick,
- &usbhost_l4_ick,
+ &usbhost_ick,
&usbhost_sar_fck,
&usim_fck,
&gpt1_fck,
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
new file mode 100644
index 00000000000..4c3ce9cfd94
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -0,0 +1,623 @@
+/*
+ * OMAP2/3 clockdomain framework functions
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley and Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN
+# define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/limits.h>
+
+#include <linux/io.h>
+
+#include <linux/bitops.h>
+
+#include <mach/clock.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+/* clkdm_list contains all registered struct clockdomains */
+static LIST_HEAD(clkdm_list);
+
+/* clkdm_mutex protects clkdm_list add and del ops */
+static DEFINE_MUTEX(clkdm_mutex);
+
+/* array of powerdomain deps to be added/removed when clkdm in hwsup mode */
+static struct clkdm_pwrdm_autodep *autodeps;
+
+
+/* Private functions */
+
+/*
+ * _autodep_lookup - resolve autodep pwrdm names to pwrdm pointers; store
+ * @autodep: struct clkdm_pwrdm_autodep * to resolve
+ *
+ * Resolve autodep powerdomain names to powerdomain pointers via
+ * pwrdm_lookup() and store the pointers in the autodep structure. An
+ * "autodep" is a powerdomain sleep/wakeup dependency that is
+ * automatically added and removed whenever clocks in the associated
+ * clockdomain are enabled or disabled (respectively) when the
+ * clockdomain is in hardware-supervised mode. Meant to be called
+ * once at clockdomain layer initialization, since these should remain
+ * fixed for a particular architecture. No return value.
+ */
+static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
+{
+ struct powerdomain *pwrdm;
+
+ if (!autodep)
+ return;
+
+ if (!omap_chip_is(autodep->omap_chip))
+ return;
+
+ pwrdm = pwrdm_lookup(autodep->pwrdm_name);
+ if (!pwrdm) {
+ pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
+ "does not exist\n", autodep->pwrdm_name);
+ WARN_ON(1);
+ return;
+ }
+ autodep->pwrdm = pwrdm;
+
+ return;
+}
+
+/*
+ * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
+ * @clkdm: struct clockdomain *
+ *
+ * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
+ * in hardware-supervised mode. Meant to be called from clock framework
+ * when a clock inside clockdomain 'clkdm' is enabled. No return value.
+ */
+static void _clkdm_add_autodeps(struct clockdomain *clkdm)
+{
+ struct clkdm_pwrdm_autodep *autodep;
+
+ for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
+ if (!autodep->pwrdm)
+ continue;
+
+ pr_debug("clockdomain: adding %s sleepdep/wkdep for "
+ "pwrdm %s\n", autodep->pwrdm_name,
+ clkdm->pwrdm->name);
+
+ pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm);
+ pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm);
+ }
+}
+
+/*
+ * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
+ * in hardware-supervised mode. Meant to be called from clock framework
+ * when a clock inside clockdomain 'clkdm' is disabled. No return value.
+ */
+static void _clkdm_del_autodeps(struct clockdomain *clkdm)
+{
+ struct clkdm_pwrdm_autodep *autodep;
+
+ for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
+ if (!autodep->pwrdm)
+ continue;
+
+ pr_debug("clockdomain: removing %s sleepdep/wkdep for "
+ "pwrdm %s\n", autodep->pwrdm_name,
+ clkdm->pwrdm->name);
+
+ pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm);
+ pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm);
+ }
+}
+
+
+static struct clockdomain *_clkdm_lookup(const char *name)
+{
+ struct clockdomain *clkdm, *temp_clkdm;
+
+ if (!name)
+ return NULL;
+
+ clkdm = NULL;
+
+ list_for_each_entry(temp_clkdm, &clkdm_list, node) {
+ if (!strcmp(name, temp_clkdm->name)) {
+ clkdm = temp_clkdm;
+ break;
+ }
+ }
+
+ return clkdm;
+}
+
+
+/* Public functions */
+
+/**
+ * clkdm_init - set up the clockdomain layer
+ * @clkdms: optional pointer to an array of clockdomains to register
+ * @init_autodeps: optional pointer to an array of autodeps to register
+ *
+ * Set up internal state. If a pointer to an array of clockdomains
+ * was supplied, loop through the list of clockdomains, register all
+ * that are available on the current platform. Similarly, if a
+ * pointer to an array of clockdomain-powerdomain autodependencies was
+ * provided, register those. No return value.
+ */
+void clkdm_init(struct clockdomain **clkdms,
+ struct clkdm_pwrdm_autodep *init_autodeps)
+{
+ struct clockdomain **c = NULL;
+ struct clkdm_pwrdm_autodep *autodep = NULL;
+
+ if (clkdms)
+ for (c = clkdms; *c; c++)
+ clkdm_register(*c);
+
+ autodeps = init_autodeps;
+ if (autodeps)
+ for (autodep = autodeps; autodep->pwrdm_name; autodep++)
+ _autodep_lookup(autodep);
+}
+
+/**
+ * clkdm_register - register a clockdomain
+ * @clkdm: struct clockdomain * to register
+ *
+ * Adds a clockdomain to the internal clockdomain list.
+ * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+int clkdm_register(struct clockdomain *clkdm)
+{
+ int ret = -EINVAL;
+ struct powerdomain *pwrdm;
+
+ if (!clkdm || !clkdm->name)
+ return -EINVAL;
+
+ if (!omap_chip_is(clkdm->omap_chip))
+ return -EINVAL;
+
+ pwrdm = pwrdm_lookup(clkdm->pwrdm_name);
+ if (!pwrdm) {
+ pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
+ "does not exist\n", clkdm->name, clkdm->pwrdm_name);
+ return -EINVAL;
+ }
+ clkdm->pwrdm = pwrdm;
+
+ mutex_lock(&clkdm_mutex);
+ /* Verify that the clockdomain is not already registered */
+ if (_clkdm_lookup(clkdm->name)) {
+ ret = -EEXIST;
+ goto cr_unlock;
+ };
+
+ list_add(&clkdm->node, &clkdm_list);
+
+ pwrdm_add_clkdm(pwrdm, clkdm);
+
+ pr_debug("clockdomain: registered %s\n", clkdm->name);
+ ret = 0;
+
+cr_unlock:
+ mutex_unlock(&clkdm_mutex);
+
+ return ret;
+}
+
+/**
+ * clkdm_unregister - unregister a clockdomain
+ * @clkdm: struct clockdomain * to unregister
+ *
+ * Removes a clockdomain from the internal clockdomain list. Returns
+ * -EINVAL if clkdm argument is NULL.
+ */
+int clkdm_unregister(struct clockdomain *clkdm)
+{
+ if (!clkdm)
+ return -EINVAL;
+
+ pwrdm_del_clkdm(clkdm->pwrdm, clkdm);
+
+ mutex_lock(&clkdm_mutex);
+ list_del(&clkdm->node);
+ mutex_unlock(&clkdm_mutex);
+
+ pr_debug("clockdomain: unregistered %s\n", clkdm->name);
+
+ return 0;
+}
+
+/**
+ * clkdm_lookup - look up a clockdomain by name, return a pointer
+ * @name: name of clockdomain
+ *
+ * Find a registered clockdomain by its name. Returns a pointer to the
+ * struct clockdomain if found, or NULL otherwise.
+ */
+struct clockdomain *clkdm_lookup(const char *name)
+{
+ struct clockdomain *clkdm, *temp_clkdm;
+
+ if (!name)
+ return NULL;
+
+ clkdm = NULL;
+
+ mutex_lock(&clkdm_mutex);
+ list_for_each_entry(temp_clkdm, &clkdm_list, node) {
+ if (!strcmp(name, temp_clkdm->name)) {
+ clkdm = temp_clkdm;
+ break;
+ }
+ }
+ mutex_unlock(&clkdm_mutex);
+
+ return clkdm;
+}
+
+/**
+ * clkdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * Call the supplied function for each registered clockdomain.
+ * The callback function can return anything but 0 to bail
+ * out early from the iterator. The callback function is called with
+ * the clkdm_mutex held, so no clockdomain structure manipulation
+ * functions should be called from the callback, although hardware
+ * clockdomain control functions are fine. Returns the last return
+ * value of the callback function, which should be 0 for success or
+ * anything else to indicate failure; or -EINVAL if the function pointer
+ * is null.
+ */
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
+{
+ struct clockdomain *clkdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ mutex_lock(&clkdm_mutex);
+ list_for_each_entry(clkdm, &clkdm_list, node) {
+ ret = (*fn)(clkdm);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&clkdm_mutex);
+
+ return ret;
+}
+
+
+/**
+ * clkdm_get_pwrdm - return a ptr to the pwrdm that this clkdm resides in
+ * @clkdm: struct clockdomain *
+ *
+ * Return a pointer to the struct powerdomain that the specified clockdomain
+ * 'clkdm' exists in, or returns NULL if clkdm argument is NULL.
+ */
+struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
+{
+ if (!clkdm)
+ return NULL;
+
+ return clkdm->pwrdm;
+}
+
+
+/* Hardware clockdomain control */
+
+/**
+ * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode
+ * @clk: struct clk * of a clockdomain
+ *
+ * Return the clockdomain's current state transition mode from the
+ * corresponding domain CM_CLKSTCTRL register. Returns -EINVAL if clk
+ * is NULL or the current mode upon success.
+ */
+static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
+{
+ u32 v;
+
+ if (!clkdm)
+ return -EINVAL;
+
+ v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ v &= clkdm->clktrctrl_mask;
+ v >>= __ffs(clkdm->clktrctrl_mask);
+
+ return v;
+}
+
+/**
+ * omap2_clkdm_sleep - force clockdomain sleep transition
+ * @clkdm: struct clockdomain *
+ *
+ * Instruct the CM to force a sleep transition on the specified
+ * clockdomain 'clkdm'. Returns -EINVAL if clk is NULL or if
+ * clockdomain does not support software-initiated sleep; 0 upon
+ * success.
+ */
+int omap2_clkdm_sleep(struct clockdomain *clkdm)
+{
+ if (!clkdm)
+ return -EINVAL;
+
+ if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ pr_debug("clockdomain: %s does not support forcing "
+ "sleep via software\n", clkdm->name);
+ return -EINVAL;
+ }
+
+ pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
+
+ if (cpu_is_omap24xx()) {
+
+ cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
+ clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ } else if (cpu_is_omap34xx()) {
+
+ u32 v = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
+ __ffs(clkdm->clktrctrl_mask));
+
+ cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
+ clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+
+ } else {
+ BUG();
+ };
+
+ return 0;
+}
+
+/**
+ * omap2_clkdm_wakeup - force clockdomain wakeup transition
+ * @clkdm: struct clockdomain *
+ *
+ * Instruct the CM to force a wakeup transition on the specified
+ * clockdomain 'clkdm'. Returns -EINVAL if clkdm is NULL or if the
+ * clockdomain does not support software-controlled wakeup; 0 upon
+ * success.
+ */
+int omap2_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ if (!clkdm)
+ return -EINVAL;
+
+ if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+ pr_debug("clockdomain: %s does not support forcing "
+ "wakeup via software\n", clkdm->name);
+ return -EINVAL;
+ }
+
+ pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
+
+ if (cpu_is_omap24xx()) {
+
+ cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
+ clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ } else if (cpu_is_omap34xx()) {
+
+ u32 v = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
+ __ffs(clkdm->clktrctrl_mask));
+
+ cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
+ clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+
+ } else {
+ BUG();
+ };
+
+ return 0;
+}
+
+/**
+ * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Allow the hardware to automatically switch the clockdomain into
+ * active or idle states, as needed by downstream clocks. If the
+ * clockdomain has any downstream clocks enabled in the clock
+ * framework, wkdep/sleepdep autodependencies are added; this is so
+ * device drivers can read and write to the device. No return value.
+ */
+void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ u32 v;
+
+ if (!clkdm)
+ return;
+
+ if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
+ pr_debug("clock: automatic idle transitions cannot be enabled "
+ "on clockdomain %s\n", clkdm->name);
+ return;
+ }
+
+ pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
+ clkdm->name);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+
+ if (cpu_is_omap24xx())
+ v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+ else if (cpu_is_omap34xx())
+ v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ BUG();
+
+
+ cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+ v << __ffs(clkdm->clktrctrl_mask),
+ clkdm->pwrdm->prcm_offs,
+ CM_CLKSTCTRL);
+}
+
+/**
+ * omap2_clkdm_deny_idle - disable hwsup idle transitions for clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Prevent the hardware from automatically switching the clockdomain
+ * into inactive or idle states. If the clockdomain has downstream
+ * clocks enabled in the clock framework, wkdep/sleepdep
+ * autodependencies are removed. No return value.
+ */
+void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ u32 v;
+
+ if (!clkdm)
+ return;
+
+ if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
+ pr_debug("clockdomain: automatic idle transitions cannot be "
+ "disabled on %s\n", clkdm->name);
+ return;
+ }
+
+ pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
+ clkdm->name);
+
+ if (cpu_is_omap24xx())
+ v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+ else if (cpu_is_omap34xx())
+ v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+ else
+ BUG();
+
+ cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+ v << __ffs(clkdm->clktrctrl_mask),
+ clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
+
+
+/* Clockdomain-to-clock framework interface code */
+
+/**
+ * omap2_clkdm_clk_enable - add an enabled downstream clock to this clkdm
+ * @clkdm: struct clockdomain *
+ * @clk: struct clk * of the enabled downstream clock
+ *
+ * Increment the usecount of this clockdomain 'clkdm' and ensure that
+ * it is awake. Intended to be called by clk_enable() code. If the
+ * clockdomain is in software-supervised idle mode, force the
+ * clockdomain to wake. If the clockdomain is in hardware-supervised
+ * idle mode, add clkdm-pwrdm autodependencies, to ensure that devices
+ * in the clockdomain can be read from/written to by on-chip processors.
+ * Returns -EINVAL if passed null pointers; returns 0 upon success or
+ * if the clockdomain is in hwsup idle mode.
+ */
+int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
+{
+ int v;
+
+ /*
+ * XXX Rewrite this code to maintain a list of enabled
+ * downstream clocks for debugging purposes?
+ */
+
+ if (!clkdm || !clk)
+ return -EINVAL;
+
+ if (atomic_inc_return(&clkdm->usecount) > 1)
+ return 0;
+
+ /* Clockdomain now has one enabled downstream clock */
+
+ pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
+ clk->name);
+
+ v = omap2_clkdm_clktrctrl_read(clkdm);
+
+ if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
+ (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+ _clkdm_add_autodeps(clkdm);
+ else
+ omap2_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+/**
+ * omap2_clkdm_clk_disable - remove an enabled downstream clock from this clkdm
+ * @clkdm: struct clockdomain *
+ * @clk: struct clk * of the disabled downstream clock
+ *
+ * Decrement the usecount of this clockdomain 'clkdm'. Intended to be
+ * called by clk_disable() code. If the usecount goes to 0, put the
+ * clockdomain to sleep (software-supervised mode) or remove the
+ * clkdm-pwrdm autodependencies (hardware-supervised mode). Returns
+ * -EINVAL if passed null pointers; -ERANGE if the clkdm usecount
+ * underflows and debugging is enabled; or returns 0 upon success or
+ * if the clockdomain is in hwsup idle mode.
+ */
+int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
+{
+ int v;
+
+ /*
+ * XXX Rewrite this code to maintain a list of enabled
+ * downstream clocks for debugging purposes?
+ */
+
+ if (!clkdm || !clk)
+ return -EINVAL;
+
+#ifdef DEBUG
+ if (atomic_read(&clkdm->usecount) == 0) {
+ WARN_ON(1); /* underflow */
+ return -ERANGE;
+ }
+#endif
+
+ if (atomic_dec_return(&clkdm->usecount) > 0)
+ return 0;
+
+ /* All downstream clocks of this clockdomain are now disabled */
+
+ pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
+ clk->name);
+
+ v = omap2_clkdm_clktrctrl_read(clkdm);
+
+ if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
+ (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+ _clkdm_del_autodeps(clkdm);
+ else
+ omap2_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
new file mode 100644
index 00000000000..cd86dcc7b42
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -0,0 +1,305 @@
+/*
+ * OMAP2/3 clockdomains
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
+
+#include <mach/clockdomain.h>
+
+/*
+ * OMAP2/3-common clockdomains
+ */
+
+/* This is an implicit clockdomain - it is never defined as such in TRM */
+static struct clockdomain wkup_clkdm = {
+ .name = "wkup_clkdm",
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+static struct clockdomain mpu_2420_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm_name = "mpu_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+ .name = "iva1_clkdm",
+ .pwrdm_name = "dsp_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+#endif /* CONFIG_ARCH_OMAP2420 */
+
+
+/*
+ * 2430-only clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP2430)
+
+static struct clockdomain mpu_2430_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm_name = "mpu_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static struct clockdomain mdm_clkdm = {
+ .name = "mdm_clkdm",
+ .pwrdm_name = "mdm_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+#endif /* CONFIG_ARCH_OMAP2430 */
+
+
+/*
+ * 24XX-only clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+
+static struct clockdomain dsp_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm_name = "dsp_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain gfx_24xx_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm_name = "gfx_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain core_l3_24xx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm_name = "core_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain core_l4_24xx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm_name = "core_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+static struct clockdomain dss_24xx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm_name = "core_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+};
+
+#endif /* CONFIG_ARCH_OMAP24XX */
+
+
+/*
+ * 34xx clockdomains
+ */
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+
+static struct clockdomain mpu_34xx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm_name = "mpu_pwrdm",
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain neon_clkdm = {
+ .name = "neon_clkdm",
+ .pwrdm_name = "neon_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain iva2_clkdm = {
+ .name = "iva2_clkdm",
+ .pwrdm_name = "iva2_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm_name = "gfx_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
+};
+
+static struct clockdomain sgx_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm_name = "sgx_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM. It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+ .name = "d2d_clkdm",
+ .pwrdm_name = "core_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain core_l3_34xx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm_name = "core_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain core_l4_34xx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm_name = "core_pwrdm",
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dss_34xx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm_name = "dss_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cam_clkdm = {
+ .name = "cam_clkdm",
+ .pwrdm_name = "cam_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain usbhost_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm_name = "usbhost_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+};
+
+static struct clockdomain per_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm_name = "per_pwrdm",
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain emu_clkdm = {
+ .name = "emu_clkdm",
+ .pwrdm_name = "emu_pwrdm",
+ .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+#endif /* CONFIG_ARCH_OMAP34XX */
+
+/*
+ * Clockdomain-powerdomain hwsup dependencies (34XX only)
+ */
+
+static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "iva2_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap[] = {
+
+ &wkup_clkdm,
+
+#ifdef CONFIG_ARCH_OMAP2420
+ &mpu_2420_clkdm,
+ &iva1_2420_clkdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+ &mpu_2430_clkdm,
+ &mdm_clkdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP24XX
+ &dsp_clkdm,
+ &gfx_24xx_clkdm,
+ &core_l3_24xx_clkdm,
+ &core_l4_24xx_clkdm,
+ &dss_24xx_clkdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+ &mpu_34xx_clkdm,
+ &neon_clkdm,
+ &iva2_clkdm,
+ &gfx_3430es1_clkdm,
+ &sgx_clkdm,
+ &d2d_clkdm,
+ &core_l3_34xx_clkdm,
+ &core_l4_34xx_clkdm,
+ &dss_34xx_clkdm,
+ &cam_clkdm,
+ &usbhost_clkdm,
+ &per_clkdm,
+ &emu_clkdm,
+#endif
+
+ NULL,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 20ac3810067..1098ecfab86 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -63,7 +63,8 @@
#define OMAP24XX_CLKSEL_MPU_MASK (0x1f << 0)
/* CM_CLKSTCTRL_MPU */
-#define OMAP24XX_AUTOSTATE_MPU (1 << 0)
+#define OMAP24XX_AUTOSTATE_MPU_SHIFT 0
+#define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits*/
#define OMAP24XX_EN_TV_SHIFT 2
@@ -238,9 +239,12 @@
#define OMAP24XX_CLKSEL_GPT2_MASK (0x3 << 2)
/* CM_CLKSTCTRL_CORE */
-#define OMAP24XX_AUTOSTATE_DSS (1 << 2)
-#define OMAP24XX_AUTOSTATE_L4 (1 << 1)
-#define OMAP24XX_AUTOSTATE_L3 (1 << 0)
+#define OMAP24XX_AUTOSTATE_DSS_SHIFT 2
+#define OMAP24XX_AUTOSTATE_DSS_MASK (1 << 2)
+#define OMAP24XX_AUTOSTATE_L4_SHIFT 1
+#define OMAP24XX_AUTOSTATE_L4_MASK (1 << 1)
+#define OMAP24XX_AUTOSTATE_L3_SHIFT 0
+#define OMAP24XX_AUTOSTATE_L3_MASK (1 << 0)
/* CM_FCLKEN_GFX */
#define OMAP24XX_EN_3D_SHIFT 2
@@ -255,7 +259,8 @@
/* CM_CLKSEL_GFX specific bits */
/* CM_CLKSTCTRL_GFX */
-#define OMAP24XX_AUTOSTATE_GFX (1 << 0)
+#define OMAP24XX_AUTOSTATE_GFX_SHIFT 0
+#define OMAP24XX_AUTOSTATE_GFX_MASK (1 << 0)
/* CM_FCLKEN_WKUP specific bits */
@@ -367,8 +372,10 @@
#define OMAP24XX_CLKSEL_DSP_MASK (0x1f << 0)
/* CM_CLKSTCTRL_DSP */
-#define OMAP2420_AUTOSTATE_IVA (1 << 8)
-#define OMAP24XX_AUTOSTATE_DSP (1 << 0)
+#define OMAP2420_AUTOSTATE_IVA_SHIFT 8
+#define OMAP2420_AUTOSTATE_IVA_MASK (1 << 8)
+#define OMAP24XX_AUTOSTATE_DSP_SHIFT 0
+#define OMAP24XX_AUTOSTATE_DSP_MASK (1 << 0)
/* CM_FCLKEN_MDM */
/* 2430 only */
@@ -396,6 +403,7 @@
/* CM_CLKSTCTRL_MDM */
/* 2430 only */
-#define OMAP2430_AUTOSTATE_MDM (1 << 0)
+#define OMAP2430_AUTOSTATE_MDM_SHIFT 0
+#define OMAP2430_AUTOSTATE_MDM_MASK (1 << 0)
#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index ee4c0ca1a70..219f5c8d965 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -96,7 +96,8 @@
#define OMAP3430_CLKTRCTRL_IVA2_MASK (0x3 << 0)
/* CM_CLKSTST_IVA2 */
-#define OMAP3430_CLKACTIVITY_IVA2 (1 << 0)
+#define OMAP3430_CLKACTIVITY_IVA2_SHIFT 0
+#define OMAP3430_CLKACTIVITY_IVA2_MASK (1 << 0)
/* CM_REVISION specific bits */
@@ -140,7 +141,8 @@
#define OMAP3430_CLKTRCTRL_MPU_MASK (0x3 << 0)
/* CM_CLKSTST_MPU */
-#define OMAP3430_CLKACTIVITY_MPU (1 << 0)
+#define OMAP3430_CLKACTIVITY_MPU_SHIFT 0
+#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits */
@@ -300,9 +302,12 @@
#define OMAP3430_CLKTRCTRL_L3_MASK (0x3 << 0)
/* CM_CLKSTST_CORE */
-#define OMAP3430ES1_CLKACTIVITY_D2D (1 << 2)
-#define OMAP3430_CLKACTIVITY_L4 (1 << 1)
-#define OMAP3430_CLKACTIVITY_L3 (1 << 0)
+#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT 2
+#define OMAP3430ES1_CLKACTIVITY_D2D_MASK (1 << 2)
+#define OMAP3430_CLKACTIVITY_L4_SHIFT 1
+#define OMAP3430_CLKACTIVITY_L4_MASK (1 << 1)
+#define OMAP3430_CLKACTIVITY_L3_SHIFT 0
+#define OMAP3430_CLKACTIVITY_L3_MASK (1 << 0)
/* CM_FCLKEN_GFX */
#define OMAP3430ES1_EN_3D (1 << 2)
@@ -323,7 +328,8 @@
#define OMAP3430ES1_CLKTRCTRL_GFX_MASK (0x3 << 0)
/* CM_CLKSTST_GFX */
-#define OMAP3430ES1_CLKACTIVITY_GFX (1 << 0)
+#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT 0
+#define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0)
/* CM_FCLKEN_SGX */
#define OMAP3430ES2_EN_SGX_SHIFT 1
@@ -333,6 +339,14 @@
#define OMAP3430ES2_CLKSEL_SGX_SHIFT 0
#define OMAP3430ES2_CLKSEL_SGX_MASK (0x7 << 0)
+/* CM_CLKSTCTRL_SGX */
+#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT 0
+#define OMAP3430ES2_CLKTRCTRL_SGX_MASK (0x3 << 0)
+
+/* CM_CLKSTST_SGX */
+#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT 0
+#define OMAP3430ES2_CLKACTIVITY_SGX_MASK (1 << 0)
+
/* CM_FCLKEN_WKUP specific bits */
#define OMAP3430ES2_EN_USIMOCP_SHIFT 9
@@ -498,7 +512,8 @@
#define OMAP3430_CLKTRCTRL_DSS_MASK (0x3 << 0)
/* CM_CLKSTST_DSS */
-#define OMAP3430_CLKACTIVITY_DSS (1 << 0)
+#define OMAP3430_CLKACTIVITY_DSS_SHIFT 0
+#define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0)
/* CM_FCLKEN_CAM specific bits */
@@ -522,7 +537,8 @@
#define OMAP3430_CLKTRCTRL_CAM_MASK (0x3 << 0)
/* CM_CLKSTST_CAM */
-#define OMAP3430_CLKACTIVITY_CAM (1 << 0)
+#define OMAP3430_CLKACTIVITY_CAM_SHIFT 0
+#define OMAP3430_CLKACTIVITY_CAM_MASK (1 << 0)
/* CM_FCLKEN_PER specific bits */
@@ -598,7 +614,8 @@
#define OMAP3430_CLKTRCTRL_PER_MASK (0x3 << 0)
/* CM_CLKSTST_PER */
-#define OMAP3430_CLKACTIVITY_PER (1 << 0)
+#define OMAP3430_CLKACTIVITY_PER_SHIFT 0
+#define OMAP3430_CLKACTIVITY_PER_MASK (1 << 0)
/* CM_CLKSEL1_EMU */
#define OMAP3430_DIV_DPLL4_SHIFT 24
@@ -623,7 +640,8 @@
#define OMAP3430_CLKTRCTRL_EMU_MASK (0x3 << 0)
/* CM_CLKSTST_EMU */
-#define OMAP3430_CLKACTIVITY_EMU (1 << 0)
+#define OMAP3430_CLKACTIVITY_EMU_SHIFT 0
+#define OMAP3430_CLKACTIVITY_EMU_MASK (1 << 0)
/* CM_CLKSEL2_EMU specific bits */
#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT 8
@@ -673,6 +691,8 @@
#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT 0
#define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK (3 << 0)
-
+/* CM_CLKSTST_USBHOST */
+#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT 0
+#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK (1 << 0)
#endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 87a44c715aa..65fdf78c91e 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -18,7 +18,7 @@
#ifndef __ASSEMBLER__
#define OMAP_CM_REGADDR(module, reg) \
- (void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+ IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7a7f0255907..90af2ac469a 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -13,9 +13,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -23,50 +23,7 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_INT2 57
-
-static struct resource i2c_resources2[] = {
- {
- .start = OMAP2_I2C_BASE2,
- .end = OMAP2_I2C_BASE2 + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP2_I2C_INT2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device omap_i2c_device2 = {
- .name = "i2c_omap",
- .id = 2,
- .num_resources = ARRAY_SIZE(i2c_resources2),
- .resource = i2c_resources2,
-};
-
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
-{
- /* REVISIT: Second I2C not in use on H4? */
- if (machine_is_omap_h4())
- return;
-
- if (!cpu_is_omap2430()) {
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
- }
- (void) platform_device_register(&omap_i2c_device2);
-}
-
-#else
-
-static void omap_init_i2c(void) {}
-
-#endif
+#include <mach/eac.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
@@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { }
#if defined(CONFIG_OMAP_STI)
-#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE 0x48068000
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
@@ -124,6 +83,25 @@ static struct resource sti_resources[] = {
.flags = IORESOURCE_IRQ,
}
};
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE 0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
+
+static struct resource sti_resources[] = {
+ {
+ .start = OMAP3_SDTI_BASE,
+ .end = OMAP3_SDTI_BASE + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3_SDTI_CHANNEL_BASE,
+ .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+#endif
static struct platform_device sti_device = {
.name = "sti",
@@ -140,12 +118,14 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
+#define OMAP2_MCSPI3_BASE 0x480b8000
+#define OMAP2_MCSPI4_BASE 0x480ba000
static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
.num_cs = 4,
@@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = {
},
};
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
.name = "omap2_mcspi",
.id = 1,
.num_resources = ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = {
},
};
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
.name = "omap2_mcspi",
.id = 2,
.num_resources = ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = {
},
};
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+ .num_cs = 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+ {
+ .start = OMAP2_MCSPI3_BASE,
+ .end = OMAP2_MCSPI3_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi3 = {
+ .name = "omap2_mcspi",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(omap2_mcspi3_resources),
+ .resource = omap2_mcspi3_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi3_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+ .num_cs = 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+ {
+ .start = OMAP2_MCSPI4_BASE,
+ .end = OMAP2_MCSPI4_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi4 = {
+ .name = "omap2_mcspi",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(omap2_mcspi4_resources),
+ .resource = omap2_mcspi4_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi4_config,
+ },
+};
+#endif
+
static void omap_init_mcspi(void)
{
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ platform_device_register(&omap2_mcspi4);
+#endif
}
#else
static inline void omap_init_mcspi(void) {}
#endif
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE 0x48090000
+
+static struct resource omap2_eac_resources[] = {
+ {
+ .start = OMAP2_EAC_BASE,
+ .end = OMAP2_EAC_BASE + 0x109,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_eac_device = {
+ .name = "omap24xx-eac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap2_eac_resources),
+ .resource = omap2_eac_resources,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+ omap2_eac_device.dev.platform_data = pdata;
+ platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+ {
+ .start = OMAP24XX_SEC_SHA1MD5_BASE,
+ .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_SHA1MD5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device sha1_md5_device = {
+ .name = "OMAP SHA1/MD5",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sha1_md5_resources),
+ .resource = sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+ platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE 0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+ {
+ .start = OMAP_HDQ_BASE,
+ .end = OMAP_HDQ_BASE + 0x1C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_HDQ_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct platform_device omap_hdq_dev = {
+ .name = "omap_hdq",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(omap_hdq_resources),
+ .resource = omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+ (void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -208,10 +334,11 @@ static int __init omap2_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
omap_init_mbox();
omap_init_mcspi();
+ omap_hdq_init();
omap_init_sti();
+ omap_init_sha1_md5();
return 0;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f51d69bc457..763bdbeaf68 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -9,27 +9,23 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#undef DEBUG
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#undef DEBUG
-
-#ifdef CONFIG_ARCH_OMAP2420
-#define GPMC_BASE 0x6800a000
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define GPMC_BASE 0x6E000000
-#endif
+#include <mach/sdrc.h>
+/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
#define GPMC_SYSSTATUS 0x14
@@ -51,7 +47,6 @@
#define GPMC_CS0 0x60
#define GPMC_CS_SIZE 0x30
-#define GPMC_CS_NUM 8
#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
#define BOOT_ROM_SPACE 0x100000 /* 1MB */
@@ -64,12 +59,9 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned gpmc_cs_map;
-static void __iomem *gpmc_base =
- (void __iomem *) IO_ADDRESS(GPMC_BASE);
-static void __iomem *gpmc_cs_base =
- (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+static void __iomem *gpmc_base;
-static struct clk *gpmc_fck;
+static struct clk *gpmc_l3_clk;
static void gpmc_write_reg(int idx, u32 val)
{
@@ -85,19 +77,32 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
- reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+ reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
__raw_writel(val, reg_addr);
}
u32 gpmc_cs_read_reg(int cs, int idx)
{
- return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+ return __raw_readl(reg_addr);
}
+/* TODO: Add support for gpmc_fck to clock framework and use it */
unsigned long gpmc_get_fclk_period(void)
{
- /* In picoseconds */
- return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
+ unsigned long rate = clk_get_rate(gpmc_l3_clk);
+
+ if (rate == 0) {
+ printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
+ return 0;
+ }
+
+ rate /= 1000;
+ rate = 1000000000 / rate; /* In picoseconds */
+
+ return rate;
}
unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -110,6 +115,11 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
+unsigned int gpmc_ticks_to_ns(unsigned int ticks)
+{
+ return ticks * gpmc_get_fclk_period() / 1000;
+}
+
unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
{
unsigned long ticks = gpmc_ns_to_ticks(time_ns);
@@ -210,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+ if (cpu_is_omap34xx()) {
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+ }
+
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
*/
@@ -350,6 +365,7 @@ out:
spin_unlock(&gpmc_mem_lock);
return r;
}
+EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
@@ -365,8 +381,9 @@ void gpmc_cs_free(int cs)
gpmc_cs_set_reserved(cs, 0);
spin_unlock(&gpmc_mem_lock);
}
+EXPORT_SYMBOL(gpmc_cs_free);
-void __init gpmc_mem_init(void)
+static void __init gpmc_mem_init(void)
{
int cs;
unsigned long boot_rom_space = 0;
@@ -396,12 +413,33 @@ void __init gpmc_mem_init(void)
void __init gpmc_init(void)
{
u32 l;
+ char *ck;
+
+ if (cpu_is_omap24xx()) {
+ ck = "core_l3_ck";
+ if (cpu_is_omap2420())
+ l = OMAP2420_GPMC_BASE;
+ else
+ l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap34xx()) {
+ ck = "gpmc_fck";
+ l = OMAP34XX_GPMC_BASE;
+ }
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck))
- WARN_ON(1);
- else
- clk_enable(gpmc_fck);
+ gpmc_l3_clk = clk_get(NULL, ck);
+ if (IS_ERR(gpmc_l3_clk)) {
+ printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
+ return -ENODEV;
+ }
+
+ gpmc_base = ioremap(l, SZ_4K);
+ if (!gpmc_base) {
+ clk_put(gpmc_l3_clk);
+ printk(KERN_ERR "Could not get GPMC register memory\n");
+ return -ENOMEM;
+ }
+
+ BUG_ON(IS_ERR(gpmc_l3_clk));
l = gpmc_read_reg(GPMC_REVISION);
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a5d4526ac4d..bf45ff39a7b 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -14,27 +14,19 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
-#include <asm/io.h>
+#include <asm/cputype.h>
+#include <mach/common.h>
#include <mach/control.h>
#include <mach/cpu.h>
-#if defined(CONFIG_ARCH_OMAP2420)
-#define TAP_BASE io_p2v(0x48014000)
-#elif defined(CONFIG_ARCH_OMAP2430)
-#define TAP_BASE io_p2v(0x4900A000)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define TAP_BASE io_p2v(0x4830A000)
-#endif
+static u32 class;
+static void __iomem *tap_base;
+static u16 tap_prod_id;
#define OMAP_TAP_IDCODE 0x0204
-#if defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP_TAP_PROD_ID 0x0210
-#else
-#define OMAP_TAP_PROD_ID 0x0208
-#endif
-
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
@@ -93,18 +85,24 @@ static u32 __init read_tap_reg(int reg)
* it means its Cortex r0p0 which is 3430 ES1
*/
if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+
+ if (reg == tap_prod_id) {
+ regval = 0x000F00F0;
+ goto out;
+ }
+
switch (reg) {
case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break;
/* Making DevType as 0xF in ES1 to differ from ES2 */
- case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
}
} else
- regval = __raw_readl(TAP_BASE + reg);
+ regval = __raw_readl(tap_base + reg);
+out:
return regval;
}
@@ -203,7 +201,7 @@ void __init omap2_check_revision(void)
u8 rev;
idcode = read_tap_reg(OMAP_TAP_IDCODE);
- prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+ prod_id = read_tap_reg(tap_prod_id);
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0x0f;
dev_type = (prod_id >> 16) & 0x0f;
@@ -268,3 +266,13 @@ void __init omap2_check_revision(void)
}
+void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+{
+ class = omap2_globals->class;
+ tap_base = omap2_globals->tap;
+
+ if (class == 0x3430)
+ tap_prod_id = 0x0210;
+ else
+ tap_prod_id = 0x0208;
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 987351f07d7..5ea64f926ed 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,8 +4,11 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ * Juha Yrjola <juha.yrjola@nokia.com>
+ * Syed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,27 +18,34 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/io.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
+
+#include <mach/powerdomain.h>
+
+#include "powerdomains.h"
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
+#include <mach/clockdomain.h>
+#include "clockdomains.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
-static struct map_desc omap2_io_desc[] __initdata = {
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
@@ -43,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = {
.type = MT_DEVICE
},
{
- .virtual = L4_24XX_VIRT,
- .pfn = __phys_to_pfn(L4_24XX_PHYS),
- .length = L4_24XX_SIZE,
- .type = MT_DEVICE
+ .virtual = L4_24XX_VIRT,
+ .pfn = __phys_to_pfn(L4_24XX_PHYS),
+ .length = L4_24XX_SIZE,
+ .type = MT_DEVICE
},
+};
+
+#ifdef CONFIG_ARCH_OMAP2420
+static struct map_desc omap242x_io_desc[] __initdata = {
+ {
+ .virtual = DSP_MEM_24XX_VIRT,
+ .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
+ .length = DSP_MEM_24XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = DSP_IPI_24XX_VIRT,
+ .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
+ .length = DSP_IPI_24XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = DSP_MMU_24XX_VIRT,
+ .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
+ .length = DSP_MMU_24XX_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+#endif
+
#ifdef CONFIG_ARCH_OMAP2430
+static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
@@ -61,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = {
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
+ {
+ .virtual = OMAP243X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
+ .length = OMAP243X_SDRC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP243X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
+ .length = OMAP243X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+};
+#endif
#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
{
- .virtual = DSP_MEM_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
- .length = DSP_MEM_24XX_SIZE,
+ .virtual = L3_34XX_VIRT,
+ .pfn = __phys_to_pfn(L3_34XX_PHYS),
+ .length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_IPI_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
- .length = DSP_IPI_24XX_SIZE,
+ .virtual = L4_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_34XX_PHYS),
+ .length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_MMU_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
- .length = DSP_MMU_24XX_SIZE,
+ .virtual = L4_WK_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
+ .length = L4_WK_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP34XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+ .length = OMAP34XX_GPMC_SIZE,
.type = MT_DEVICE
- }
+ },
+ {
+ .virtual = OMAP343X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
+ .length = OMAP343X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
+ .length = OMAP343X_SDRC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_PER_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
+ .length = L4_PER_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_EMU_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
+ .length = L4_EMU_34XX_SIZE,
+ .type = MT_DEVICE
+ },
};
+#endif
void __init omap2_map_common_io(void)
{
- iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+#if defined(CONFIG_ARCH_OMAP2420)
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+ iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
@@ -101,12 +198,9 @@ void __init omap2_map_common_io(void)
void __init omap2_init_common_hw(void)
{
omap2_mux_init();
+ pwrdm_init(powerdomains_omap);
+ clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
omap2_init_memory();
-#endif
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ef15b31d8f..d354e0fe447 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,17 +13,23 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#define INTC_REVISION 0x0000
-#define INTC_SYSCONFIG 0x0010
-#define INTC_SYSSTATUS 0x0014
-#define INTC_CONTROL 0x0048
-#define INTC_MIR_CLEAR0 0x0088
-#define INTC_MIR_SET0 0x008c
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION 0x0000
+#define INTC_SYSCONFIG 0x0010
+#define INTC_SYSSTATUS 0x0014
+#define INTC_CONTROL 0x0048
+#define INTC_MIR_CLEAR0 0x0088
+#define INTC_MIR_SET0 0x008c
+#define INTC_PENDING_IRQ0 0x0098
+
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG 32
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
@@ -32,48 +38,50 @@
* for each bank.. when in doubt, consult the TRM.
*/
static struct omap_irq_bank {
- unsigned long base_reg;
+ void __iomem *base_reg;
unsigned int nr_irqs;
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+ __raw_writel(val, bank->base_reg + reg);
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+ return __raw_readl(bank->base_reg + reg);
+}
+
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
static void omap_ack_irq(unsigned int irq)
{
- __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+ intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
}
static void omap_mask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
}
static void omap_unmask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
}
static void omap_mask_ack_irq(unsigned int irq)
@@ -93,20 +101,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
{
unsigned long tmp;
- tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
- printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+ tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
+ printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
"(revision %ld.%ld) with %d interrupts\n",
bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
- tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG);
+ tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
- __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
- while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+ while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
/* Wait for reset to complete */;
/* Enable autoidle */
- __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
void __init omap_init_irq(void)
@@ -118,9 +126,10 @@ void __init omap_init_irq(void)
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
+ if (cpu_is_omap24xx())
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+ else if (cpu_is_omap34xx())
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
omap_irq_bank_init_one(bank);
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index a480b96948e..32b7af3c610 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,9 +14,9 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/mailbox.h>
#include <mach/irqs.h>
-#include <asm/io.h>
#define MAILBOX_REVISION 0x00
#define MAILBOX_SYSCONFIG 0x10
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b261f1f80b5..cae3ebe249b 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -89,6 +89,30 @@ static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
.disable = omap_mcbsp_clk_disable,
},
},
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 3,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 4,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
+ {
+ .clk = {
+ .name = "mcbsp_clk",
+ .id = 5,
+ .enable = omap_mcbsp_clk_enable,
+ .disable = omap_mcbsp_clk_disable,
+ },
+ },
};
#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
@@ -117,25 +141,14 @@ static void omap2_mcbsp_request(unsigned int id)
omap2_mcbsp2_mux_setup();
}
-static int omap2_mcbsp_check(unsigned int id)
-{
- if (id > OMAP_MAX_MCBSP_COUNT - 1) {
- printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
- return -ENODEV;
- }
- return 0;
-}
-
static struct omap_mcbsp_ops omap2_mcbsp_ops = {
.request = omap2_mcbsp_request,
- .check = omap2_mcbsp_check,
};
-#ifdef CONFIG_ARCH_OMAP24XX
-static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+#ifdef CONFIG_ARCH_OMAP2420
+static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
{
.phys_base = OMAP24XX_MCBSP1_BASE,
- .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
@@ -145,7 +158,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
- .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
@@ -154,17 +166,70 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
.clk_name = "mcbsp_clk",
},
};
-#define OMAP24XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
#else
-#define omap24xx_mcbsp_pdata NULL
-#define OMAP24XX_MCBSP_PDATA_SZ 0
+#define omap2420_mcbsp_pdata NULL
+#define OMAP2420_MCBSP_PDATA_SZ 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
+ {
+ .phys_base = OMAP24XX_MCBSP1_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
+ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .phys_base = OMAP24XX_MCBSP2_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
+ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .phys_base = OMAP2430_MCBSP3_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
+ .rx_irq = INT_24XX_MCBSP3_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP3_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .phys_base = OMAP2430_MCBSP4_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
+ .rx_irq = INT_24XX_MCBSP4_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP4_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .phys_base = OMAP2430_MCBSP5_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
+ .rx_irq = INT_24XX_MCBSP5_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP5_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+};
+#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
+#else
+#define omap2430_mcbsp_pdata NULL
+#define OMAP2430_MCBSP_PDATA_SZ 0
#endif
#ifdef CONFIG_ARCH_OMAP34XX
static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
{
.phys_base = OMAP34XX_MCBSP1_BASE,
- .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
@@ -174,7 +239,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
- .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
@@ -182,6 +246,33 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
+ {
+ .phys_base = OMAP34XX_MCBSP3_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
+ .rx_irq = INT_24XX_MCBSP3_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP3_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .phys_base = OMAP34XX_MCBSP4_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
+ .rx_irq = INT_24XX_MCBSP4_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP4_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
+ {
+ .phys_base = OMAP34XX_MCBSP5_BASE,
+ .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX,
+ .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
+ .rx_irq = INT_24XX_MCBSP5_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP5_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ .clk_name = "mcbsp_clk",
+ },
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
#else
@@ -189,7 +280,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
#define OMAP34XX_MCBSP_PDATA_SZ 0
#endif
-int __init omap2_mcbsp_init(void)
+static int __init omap2_mcbsp_init(void)
{
int i;
@@ -199,10 +290,24 @@ int __init omap2_mcbsp_init(void)
clk_register(&omap_mcbsp_clks[i].clk);
}
- if (cpu_is_omap24xx())
- omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
- OMAP24XX_MCBSP_PDATA_SZ);
+ if (cpu_is_omap2420())
+ omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
+ if (cpu_is_omap2430())
+ omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
+ if (cpu_is_omap34xx())
+ omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+
+ mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+ GFP_KERNEL);
+ if (!mcbsp_ptr)
+ return -ENOMEM;
+ if (cpu_is_omap2420())
+ omap_mcbsp_register_board_cfg(omap2420_mcbsp_pdata,
+ OMAP2420_MCBSP_PDATA_SZ);
+ if (cpu_is_omap2430())
+ omap_mcbsp_register_board_cfg(omap2430_mcbsp_pdata,
+ OMAP2430_MCBSP_PDATA_SZ);
if (cpu_is_omap34xx())
omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
OMAP34XX_MCBSP_PDATA_SZ);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 6b49cc9cbdc..882c7022429 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -21,8 +21,7 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/common.h>
#include <mach/clock.h>
@@ -102,6 +101,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
return prev;
}
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type)
+{
+}
+#endif
+
void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
@@ -166,6 +176,9 @@ void __init omap2_init_memory(void)
{
u32 l;
+ if (!cpu_is_omap2420())
+ return;
+
l = sms_read_reg(SMS_SYSCONFIG);
l &= ~(0x3 << 3);
l |= (0x2 << 3);
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index 9a280b50a89..bb3db80a7c4 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -14,6 +14,9 @@
* published by the Free Software Foundation.
*/
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);
u32 omap2_dll_force_needed(void);
u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 443d07fef7f..b1393673d95 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-omap2/mux.c
*
- * OMAP2 pin multiplexing configurations
+ * OMAP2 and OMAP3 pin multiplexing configurations
*
* Copyright (C) 2004 - 2008 Texas Instruments Inc.
* Copyright (C) 2003 - 2008 Nokia Corporation
@@ -25,10 +25,11 @@
*/
#include <linux/module.h>
#include <linux/init.h>
-#include <asm/system.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/spinlock.h>
+#include <asm/system.h>
+
#include <mach/control.h>
#include <mach/mux.h>
@@ -219,16 +220,222 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1)
#define OMAP24XX_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP24XX */
-#define OMAP24XX_PULL_ENA (1 << 3)
-#define OMAP24XX_PULL_UP (1 << 4)
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct pin_config __initdata_or_module omap34xx_pins[] = {
+/*
+ * Name, reg-offset,
+ * mux-mode | [active-mode | off-mode]
+ */
+
+/* 34xx I2C */
+MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 3*/
+MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+
+};
+
+#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
+
+#else
+#define omap34xx_pins NULL
+#define OMAP34XX_PINS_SZ 0
+#endif /* CONFIG_ARCH_OMAP34XX */
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
+static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
{
u16 orig;
u8 warn = 0, debug = 0;
- orig = omap_ctrl_readb(cfg->mux_reg);
+ if (cpu_is_omap24xx())
+ orig = omap_ctrl_readb(cfg->mux_reg);
+ else
+ orig = omap_ctrl_readw(cfg->mux_reg);
#ifdef CONFIG_OMAP_MUX_DEBUG
debug = cfg->debug;
@@ -254,9 +461,9 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
spin_lock_irqsave(&mux_spin_lock, flags);
reg |= cfg->mask & 0x7;
if (cfg->pull_val)
- reg |= OMAP24XX_PULL_ENA;
+ reg |= OMAP2_PULL_ENA;
if (cfg->pu_pd_val)
- reg |= OMAP24XX_PULL_UP;
+ reg |= OMAP2_PULL_UP;
omap2_cfg_debug(cfg, reg);
omap_ctrl_writeb(reg, cfg->mux_reg);
spin_unlock_irqrestore(&mux_spin_lock, flags);
@@ -264,7 +471,26 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
return 0;
}
#else
-#define omap24xx_cfg_reg 0
+#define omap24xx_cfg_reg NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
+{
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ unsigned long flags;
+ u16 reg = 0;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg |= cfg->mux_val;
+ omap2_cfg_debug(cfg, reg);
+ omap_ctrl_writew(reg, cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+
+ return 0;
+}
+#else
+#define omap34xx_cfg_reg NULL
#endif
int __init omap2_mux_init(void)
@@ -273,6 +499,10 @@ int __init omap2_mux_init(void)
arch_mux_cfg.pins = omap24xx_pins;
arch_mux_cfg.size = OMAP24XX_PINS_SZ;
arch_mux_cfg.cfg_reg = omap24xx_cfg_reg;
+ } else if (cpu_is_omap34xx()) {
+ arch_mux_cfg.pins = omap34xx_pins;
+ arch_mux_cfg.size = OMAP34XX_PINS_SZ;
+ arch_mux_cfg.cfg_reg = omap34xx_cfg_reg;
}
return omap_mux_register(&arch_mux_cfg);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 8671e1079ab..55361c16c9d 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -24,8 +24,8 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
new file mode 100644
index 00000000000..73e2971b175
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -0,0 +1,1113 @@
+/*
+ * OMAP powerdomain control
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN
+# define DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+#include <mach/cpu.h>
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+/* pwrdm_list contains all registered struct powerdomains */
+static LIST_HEAD(pwrdm_list);
+
+/*
+ * pwrdm_rwlock protects pwrdm_list add and del ops - also reused to
+ * protect pwrdm_clkdms[] during clkdm add/del ops
+ */
+static DEFINE_RWLOCK(pwrdm_rwlock);
+
+
+/* Private functions */
+
+static u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static struct powerdomain *_pwrdm_lookup(const char *name)
+{
+ struct powerdomain *pwrdm, *temp_pwrdm;
+
+ pwrdm = NULL;
+
+ list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
+ if (!strcmp(name, temp_pwrdm->name)) {
+ pwrdm = temp_pwrdm;
+ break;
+ }
+ }
+
+ return pwrdm;
+}
+
+/* _pwrdm_deps_lookup - look up the specified powerdomain in a pwrdm list */
+static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
+ struct pwrdm_dep *deps)
+{
+ struct pwrdm_dep *pd;
+
+ if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
+ return ERR_PTR(-EINVAL);
+
+ for (pd = deps; pd; pd++) {
+
+ if (!omap_chip_is(pd->omap_chip))
+ continue;
+
+ if (!pd->pwrdm && pd->pwrdm_name)
+ pd->pwrdm = pwrdm_lookup(pd->pwrdm_name);
+
+ if (pd->pwrdm == pwrdm)
+ break;
+
+ }
+
+ if (!pd)
+ return ERR_PTR(-ENOENT);
+
+ return pd->pwrdm;
+}
+
+
+/* Public functions */
+
+/**
+ * pwrdm_init - set up the powerdomain layer
+ *
+ * Loop through the list of powerdomains, registering all that are
+ * available on the current CPU. If pwrdm_list is supplied and not
+ * null, all of the referenced powerdomains will be registered. No
+ * return value.
+ */
+void pwrdm_init(struct powerdomain **pwrdm_list)
+{
+ struct powerdomain **p = NULL;
+
+ if (pwrdm_list)
+ for (p = pwrdm_list; *p; p++)
+ pwrdm_register(*p);
+}
+
+/**
+ * pwrdm_register - register a powerdomain
+ * @pwrdm: struct powerdomain * to register
+ *
+ * Adds a powerdomain to the internal powerdomain list. Returns
+ * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+int pwrdm_register(struct powerdomain *pwrdm)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (!omap_chip_is(pwrdm->omap_chip))
+ return -EINVAL;
+
+ write_lock_irqsave(&pwrdm_rwlock, flags);
+ if (_pwrdm_lookup(pwrdm->name)) {
+ ret = -EEXIST;
+ goto pr_unlock;
+ }
+
+ list_add(&pwrdm->node, &pwrdm_list);
+
+ pr_debug("powerdomain: registered %s\n", pwrdm->name);
+ ret = 0;
+
+pr_unlock:
+ write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ return ret;
+}
+
+/**
+ * pwrdm_unregister - unregister a powerdomain
+ * @pwrdm: struct powerdomain * to unregister
+ *
+ * Removes a powerdomain from the internal powerdomain list. Returns
+ * -EINVAL if pwrdm argument is NULL.
+ */
+int pwrdm_unregister(struct powerdomain *pwrdm)
+{
+ unsigned long flags;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ write_lock_irqsave(&pwrdm_rwlock, flags);
+ list_del(&pwrdm->node);
+ write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ pr_debug("powerdomain: unregistered %s\n", pwrdm->name);
+
+ return 0;
+}
+
+/**
+ * pwrdm_lookup - look up a powerdomain by name, return a pointer
+ * @name: name of powerdomain
+ *
+ * Find a registered powerdomain by its name. Returns a pointer to the
+ * struct powerdomain if found, or NULL otherwise.
+ */
+struct powerdomain *pwrdm_lookup(const char *name)
+{
+ struct powerdomain *pwrdm;
+ unsigned long flags;
+
+ if (!name)
+ return NULL;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+ pwrdm = _pwrdm_lookup(name);
+ read_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ return pwrdm;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * Call the supplied function for each registered powerdomain. The
+ * callback function can return anything but 0 to bail out early from
+ * the iterator. The callback function is called with the pwrdm_rwlock
+ * held for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware
+ * powerdomain control functions are fine. Returns the last return
+ * value of the callback function, which should be 0 for success or
+ * anything else to indicate failure; or -EINVAL if the function
+ * pointer is null.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
+{
+ struct powerdomain *temp_pwrdm;
+ unsigned long flags;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+ list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
+ ret = (*fn)(temp_pwrdm);
+ if (ret)
+ break;
+ }
+ read_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ return ret;
+}
+
+/**
+ * pwrdm_add_clkdm - add a clockdomain to a powerdomain
+ * @pwrdm: struct powerdomain * to add the clockdomain to
+ * @clkdm: struct clockdomain * to associate with a powerdomain
+ *
+ * Associate the clockdomain 'clkdm' with a powerdomain 'pwrdm'. This
+ * enables the use of pwrdm_for_each_clkdm(). Returns -EINVAL if
+ * presented with invalid pointers; -ENOMEM if memory could not be allocated;
+ * or 0 upon success.
+ */
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
+{
+ unsigned long flags;
+ int i;
+ int ret = -EINVAL;
+
+ if (!pwrdm || !clkdm)
+ return -EINVAL;
+
+ pr_debug("powerdomain: associating clockdomain %s with powerdomain "
+ "%s\n", clkdm->name, pwrdm->name);
+
+ write_lock_irqsave(&pwrdm_rwlock, flags);
+
+ for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
+ if (!pwrdm->pwrdm_clkdms[i])
+ break;
+#ifdef DEBUG
+ if (pwrdm->pwrdm_clkdms[i] == clkdm) {
+ ret = -EINVAL;
+ goto pac_exit;
+ }
+#endif
+ }
+
+ if (i == PWRDM_MAX_CLKDMS) {
+ pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
+ "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
+ WARN_ON(1);
+ ret = -ENOMEM;
+ goto pac_exit;
+ }
+
+ pwrdm->pwrdm_clkdms[i] = clkdm;
+
+ ret = 0;
+
+pac_exit:
+ write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ return ret;
+}
+
+/**
+ * pwrdm_del_clkdm - remove a clockdomain from a powerdomain
+ * @pwrdm: struct powerdomain * to add the clockdomain to
+ * @clkdm: struct clockdomain * to associate with a powerdomain
+ *
+ * Dissociate the clockdomain 'clkdm' from the powerdomain
+ * 'pwrdm'. Returns -EINVAL if presented with invalid pointers;
+ * -ENOENT if the clkdm was not associated with the powerdomain, or 0
+ * upon success.
+ */
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+ int i;
+
+ if (!pwrdm || !clkdm)
+ return -EINVAL;
+
+ pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
+ "%s\n", clkdm->name, pwrdm->name);
+
+ write_lock_irqsave(&pwrdm_rwlock, flags);
+
+ for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
+ if (pwrdm->pwrdm_clkdms[i] == clkdm)
+ break;
+
+ if (i == PWRDM_MAX_CLKDMS) {
+ pr_debug("powerdomain: clkdm %s not associated with pwrdm "
+ "%s ?!\n", clkdm->name, pwrdm->name);
+ ret = -ENOENT;
+ goto pdc_exit;
+ }
+
+ pwrdm->pwrdm_clkdms[i] = NULL;
+
+ ret = 0;
+
+pdc_exit:
+ write_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ return ret;
+}
+
+/**
+ * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm
+ * @pwrdm: struct powerdomain * to iterate over
+ * @fn: callback function *
+ *
+ * Call the supplied function for each clockdomain in the powerdomain
+ * 'pwrdm'. The callback function can return anything but 0 to bail
+ * out early from the iterator. The callback function is called with
+ * the pwrdm_rwlock held for reading, so no powerdomain structure
+ * manipulation functions should be called from the callback, although
+ * hardware powerdomain control functions are fine. Returns -EINVAL
+ * if presented with invalid pointers; or passes along the last return
+ * value of the callback function, which should be 0 for success or
+ * anything else to indicate failure.
+ */
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+ int (*fn)(struct powerdomain *pwrdm,
+ struct clockdomain *clkdm))
+{
+ unsigned long flags;
+ int ret = 0;
+ int i;
+
+ if (!fn)
+ return -EINVAL;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+
+ for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
+ ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
+
+ read_unlock_irqrestore(&pwrdm_rwlock, flags);
+
+ return ret;
+}
+
+
+/**
+ * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: wake this struct powerdomain * up (dependent)
+ * @pwrdm2: when this struct powerdomain * wakes up (source)
+ *
+ * When the powerdomain represented by pwrdm2 wakes up (due to an
+ * interrupt), wake up pwrdm1. Implemented in hardware on the OMAP,
+ * this feature is designed to reduce wakeup latency of the dependent
+ * powerdomain. Returns -EINVAL if presented with invalid powerdomain
+ * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+ struct powerdomain *p;
+
+ if (!pwrdm1)
+ return -EINVAL;
+
+ p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
+ if (IS_ERR(p)) {
+ pr_debug("powerdomain: hardware cannot set/clear wake up of "
+ "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
+ return IS_ERR(p);
+ }
+
+ pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n",
+ pwrdm1->name, pwrdm2->name);
+
+ prm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
+ pwrdm1->prcm_offs, PM_WKDEP);
+
+ return 0;
+}
+
+/**
+ * pwrdm_del_wkdep - remove a wakeup dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: wake this struct powerdomain * up (dependent)
+ * @pwrdm2: when this struct powerdomain * wakes up (source)
+ *
+ * Remove a wakeup dependency that causes pwrdm1 to wake up when pwrdm2
+ * wakes up. Returns -EINVAL if presented with invalid powerdomain
+ * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+ struct powerdomain *p;
+
+ if (!pwrdm1)
+ return -EINVAL;
+
+ p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
+ if (IS_ERR(p)) {
+ pr_debug("powerdomain: hardware cannot set/clear wake up of "
+ "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
+ return IS_ERR(p);
+ }
+
+ pr_debug("powerdomain: hardware will no longer wake up %s after %s "
+ "wakes up\n", pwrdm1->name, pwrdm2->name);
+
+ prm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
+ pwrdm1->prcm_offs, PM_WKDEP);
+
+ return 0;
+}
+
+/**
+ * pwrdm_read_wkdep - read wakeup dependency state from pwrdm2 to pwrdm1
+ * @pwrdm1: wake this struct powerdomain * up (dependent)
+ * @pwrdm2: when this struct powerdomain * wakes up (source)
+ *
+ * Return 1 if a hardware wakeup dependency exists wherein pwrdm1 will be
+ * awoken when pwrdm2 wakes up; 0 if dependency is not set; -EINVAL
+ * if either powerdomain pointer is invalid; or -ENOENT if the hardware
+ * is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * wakeup dependencies. Wakeup dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+ struct powerdomain *p;
+
+ if (!pwrdm1)
+ return -EINVAL;
+
+ p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
+ if (IS_ERR(p)) {
+ pr_debug("powerdomain: hardware cannot set/clear wake up of "
+ "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
+ return IS_ERR(p);
+ }
+
+ return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP,
+ (1 << pwrdm2->dep_bit));
+}
+
+/**
+ * pwrdm_add_sleepdep - add a sleep dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
+ * @pwrdm2: when this struct powerdomain * is active (source)
+ *
+ * Prevent pwrdm1 from automatically going inactive (and then to
+ * retention or off) if pwrdm2 is still active. Returns -EINVAL if
+ * presented with invalid powerdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep dependencies,
+ * -ENOENT if the specified dependency cannot be set in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+ struct powerdomain *p;
+
+ if (!pwrdm1)
+ return -EINVAL;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
+ if (IS_ERR(p)) {
+ pr_debug("powerdomain: hardware cannot set/clear sleep "
+ "dependency affecting %s from %s\n", pwrdm1->name,
+ pwrdm2->name);
+ return IS_ERR(p);
+ }
+
+ pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n",
+ pwrdm1->name, pwrdm2->name);
+
+ cm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
+ pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
+
+ return 0;
+}
+
+/**
+ * pwrdm_del_sleepdep - remove a sleep dependency from pwrdm2 to pwrdm1
+ * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
+ * @pwrdm2: when this struct powerdomain * is active (source)
+ *
+ * Allow pwrdm1 to automatically go inactive (and then to retention or
+ * off), independent of the activity state of pwrdm2. Returns -EINVAL
+ * if presented with invalid powerdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep dependencies,
+ * -ENOENT if the specified dependency cannot be cleared in hardware, or
+ * 0 upon success.
+ */
+int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+ struct powerdomain *p;
+
+ if (!pwrdm1)
+ return -EINVAL;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
+ if (IS_ERR(p)) {
+ pr_debug("powerdomain: hardware cannot set/clear sleep "
+ "dependency affecting %s from %s\n", pwrdm1->name,
+ pwrdm2->name);
+ return IS_ERR(p);
+ }
+
+ pr_debug("powerdomain: will no longer prevent %s from sleeping if "
+ "%s is active\n", pwrdm1->name, pwrdm2->name);
+
+ cm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
+ pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
+
+ return 0;
+}
+
+/**
+ * pwrdm_read_sleepdep - read sleep dependency state from pwrdm2 to pwrdm1
+ * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
+ * @pwrdm2: when this struct powerdomain * is active (source)
+ *
+ * Return 1 if a hardware sleep dependency exists wherein pwrdm1 will
+ * not be allowed to automatically go inactive if pwrdm2 is active;
+ * 0 if pwrdm1's automatic power state inactivity transition is independent
+ * of pwrdm2's; -EINVAL if either powerdomain pointer is invalid or called
+ * on a machine that does not support software-configurable hardware sleep
+ * dependencies; or -ENOENT if the hardware is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * sleep dependencies. Sleep dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
+{
+ struct powerdomain *p;
+
+ if (!pwrdm1)
+ return -EINVAL;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
+ if (IS_ERR(p)) {
+ pr_debug("powerdomain: hardware cannot set/clear sleep "
+ "dependency affecting %s from %s\n", pwrdm1->name,
+ pwrdm2->name);
+ return IS_ERR(p);
+ }
+
+ return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP,
+ (1 << pwrdm2->dep_bit));
+}
+
+/**
+ * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
+ * @pwrdm: struct powerdomain *
+ *
+ * Return the number of controllable memory banks in powerdomain pwrdm,
+ * starting with 1. Returns -EINVAL if the powerdomain pointer is null.
+ */
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ return pwrdm->banks;
+}
+
+/**
+ * pwrdm_set_next_pwrst - set next powerdomain power state
+ * @pwrdm: struct powerdomain * to set
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the powerdomain pwrdm's next power state to pwrst. The powerdomain
+ * may not enter this state immediately if the preconditions for this state
+ * have not been satisfied. Returns -EINVAL if the powerdomain pointer is
+ * null or if the power state is invalid for the powerdomin, or returns 0
+ * upon success.
+ */
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (!(pwrdm->pwrsts & (1 << pwrst)))
+ return -EINVAL;
+
+ pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
+ pwrdm->name, pwrst);
+
+ prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ return 0;
+}
+
+/**
+ * pwrdm_read_next_pwrst - get next powerdomain power state
+ * @pwrdm: struct powerdomain * to get power state
+ *
+ * Return the powerdomain pwrdm's next power state. Returns -EINVAL
+ * if the powerdomain pointer is null or returns the next power state
+ * upon success.
+ */
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTCTRL,
+ OMAP_POWERSTATE_MASK);
+}
+
+/**
+ * pwrdm_read_pwrst - get current powerdomain power state
+ * @pwrdm: struct powerdomain * to get power state
+ *
+ * Return the powerdomain pwrdm's current power state. Returns -EINVAL
+ * if the powerdomain pointer is null or returns the current power state
+ * upon success.
+ */
+int pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
+ OMAP_POWERSTATEST_MASK);
+}
+
+/**
+ * pwrdm_read_prev_pwrst - get previous powerdomain power state
+ * @pwrdm: struct powerdomain * to get previous power state
+ *
+ * Return the powerdomain pwrdm's previous power state. Returns -EINVAL
+ * if the powerdomain pointer is null or returns the previous power state
+ * upon success.
+ */
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+/**
+ * pwrdm_set_logic_retst - set powerdomain logic power state upon retention
+ * @pwrdm: struct powerdomain * to set
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the next power state that the logic portion of the powerdomain
+ * pwrdm will enter when the powerdomain enters retention. This will
+ * be either RETENTION or OFF, if supported. Returns -EINVAL if the
+ * powerdomain pointer is null or the target power state is not not
+ * supported, or returns 0 upon success.
+ */
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
+ return -EINVAL;
+
+ pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
+ pwrdm->name, pwrst);
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE,
+ (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)),
+ pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ return 0;
+}
+
+/**
+ * pwrdm_set_mem_onst - set memory power state while powerdomain ON
+ * @pwrdm: struct powerdomain * to set
+ * @bank: memory bank number to set (0-3)
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the next power state that memory bank x of the powerdomain
+ * pwrdm will enter when the powerdomain enters the ON state. Bank
+ * will be a number from 0 to 3, and represents different types of
+ * memory, depending on the powerdomain. Returns -EINVAL if the
+ * powerdomain pointer is null or the target power state is not not
+ * supported for this memory bank, -EEXIST if the target memory bank
+ * does not exist or is not controllable, or returns 0 upon success.
+ */
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
+{
+ u32 m;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (pwrdm->banks < (bank + 1))
+ return -EEXIST;
+
+ if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
+ return -EINVAL;
+
+ pr_debug("powerdomain: setting next memory powerstate for domain %s "
+ "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ switch (bank) {
+ case 0:
+ m = OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK;
+ break;
+ case 1:
+ m = OMAP3430_L1FLATMEMONSTATE_MASK;
+ break;
+ case 2:
+ m = OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK;
+ break;
+ case 3:
+ m = OMAP3430_L2FLATMEMONSTATE_MASK;
+ break;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+
+ prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ return 0;
+}
+
+/**
+ * pwrdm_set_mem_retst - set memory power state while powerdomain in RET
+ * @pwrdm: struct powerdomain * to set
+ * @bank: memory bank number to set (0-3)
+ * @pwrst: one of the PWRDM_POWER_* macros
+ *
+ * Set the next power state that memory bank x of the powerdomain
+ * pwrdm will enter when the powerdomain enters the RETENTION state.
+ * Bank will be a number from 0 to 3, and represents different types
+ * of memory, depending on the powerdomain. pwrst will be either
+ * RETENTION or OFF, if supported. Returns -EINVAL if the powerdomain
+ * pointer is null or the target power state is not not supported for
+ * this memory bank, -EEXIST if the target memory bank does not exist
+ * or is not controllable, or returns 0 upon success.
+ */
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
+{
+ u32 m;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (pwrdm->banks < (bank + 1))
+ return -EEXIST;
+
+ if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
+ return -EINVAL;
+
+ pr_debug("powerdomain: setting next memory powerstate for domain %s "
+ "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ switch (bank) {
+ case 0:
+ m = OMAP3430_SHAREDL1CACHEFLATRETSTATE;
+ break;
+ case 1:
+ m = OMAP3430_L1FLATMEMRETSTATE;
+ break;
+ case 2:
+ m = OMAP3430_SHAREDL2CACHEFLATRETSTATE;
+ break;
+ case 3:
+ m = OMAP3430_L2FLATMEMRETSTATE;
+ break;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+
+ prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ PM_PWSTCTRL);
+
+ return 0;
+}
+
+/**
+ * pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
+ * @pwrdm: struct powerdomain * to get current logic retention power state
+ *
+ * Return the current power state that the logic portion of
+ * powerdomain pwrdm will enter
+ * Returns -EINVAL if the powerdomain pointer is null or returns the
+ * current logic retention power state upon success.
+ */
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
+ OMAP3430_LOGICSTATEST);
+}
+
+/**
+ * pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
+ * @pwrdm: struct powerdomain * to get previous logic power state
+ *
+ * Return the powerdomain pwrdm's logic power state. Returns -EINVAL
+ * if the powerdomain pointer is null or returns the previous logic
+ * power state upon success.
+ */
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTLOGICSTATEENTERED);
+}
+
+/**
+ * pwrdm_read_mem_pwrst - get current memory bank power state
+ * @pwrdm: struct powerdomain * to get current memory bank power state
+ * @bank: memory bank number (0-3)
+ *
+ * Return the powerdomain pwrdm's current memory power state for bank
+ * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * the target memory bank does not exist or is not controllable, or
+ * returns the current memory power state upon success.
+ */
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (pwrdm->banks < (bank + 1))
+ return -EEXIST;
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ switch (bank) {
+ case 0:
+ m = OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK;
+ break;
+ case 1:
+ m = OMAP3430_L1FLATMEMSTATEST_MASK;
+ break;
+ case 2:
+ m = OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK;
+ break;
+ case 3:
+ m = OMAP3430_L2FLATMEMSTATEST_MASK;
+ break;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, m);
+}
+
+/**
+ * pwrdm_read_prev_mem_pwrst - get previous memory bank power state
+ * @pwrdm: struct powerdomain * to get previous memory bank power state
+ * @bank: memory bank number (0-3)
+ *
+ * Return the powerdomain pwrdm's previous memory power state for bank
+ * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * the target memory bank does not exist or is not controllable, or
+ * returns the previous memory power state upon success.
+ */
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (pwrdm->banks < (bank + 1))
+ return -EEXIST;
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ switch (bank) {
+ case 0:
+ m = OMAP3430_LASTMEM1STATEENTERED_MASK;
+ break;
+ case 1:
+ m = OMAP3430_LASTMEM2STATEENTERED_MASK;
+ break;
+ case 2:
+ m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+ break;
+ case 3:
+ m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+ break;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST, m);
+}
+
+/**
+ * pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
+ * @pwrdm: struct powerdomain * to clear
+ *
+ * Clear the powerdomain's previous power state register. Clears the
+ * entire register, including logic and memory bank previous power states.
+ * Returns -EINVAL if the powerdomain pointer is null, or returns 0 upon
+ * success.
+ */
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ /*
+ * XXX should get the powerdomain's current state here;
+ * warn & fail if it is not ON.
+ */
+
+ pr_debug("powerdomain: clearing previous power state reg for %s\n",
+ pwrdm->name);
+
+ prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+
+ return 0;
+}
+
+/**
+ * pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm
+ * @pwrdm: struct powerdomain *
+ *
+ * Enable automatic context save-and-restore upon power state change
+ * for some devices in a powerdomain. Warning: this only affects a
+ * subset of devices in a powerdomain; check the TRM closely. Returns
+ * -EINVAL if the powerdomain pointer is null or if the powerdomain
+ * does not support automatic save-and-restore, or returns 0 upon
+ * success.
+ */
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
+ return -EINVAL;
+
+ pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
+ pwrdm->name);
+
+ prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ return 0;
+}
+
+/**
+ * pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm
+ * @pwrdm: struct powerdomain *
+ *
+ * Disable automatic context save-and-restore upon power state change
+ * for some devices in a powerdomain. Warning: this only affects a
+ * subset of devices in a powerdomain; check the TRM closely. Returns
+ * -EINVAL if the powerdomain pointer is null or if the powerdomain
+ * does not support automatic save-and-restore, or returns 0 upon
+ * success.
+ */
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
+ return -EINVAL;
+
+ pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
+ pwrdm->name);
+
+ prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
+ pwrdm->prcm_offs, PM_PWSTCTRL);
+
+ return 0;
+}
+
+/**
+ * pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
+ * @pwrdm: struct powerdomain *
+ *
+ * Returns 1 if powerdomain 'pwrdm' supports hardware save-and-restore
+ * for some devices, or 0 if it does not.
+ */
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
+}
+
+/**
+ * pwrdm_wait_transition - wait for powerdomain power transition to finish
+ * @pwrdm: struct powerdomain * to wait for
+ *
+ * If the powerdomain pwrdm is in the process of a state transition,
+ * spin until it completes the power transition, or until an iteration
+ * bailout value is reached. Returns -EINVAL if the powerdomain
+ * pointer is null, -EAGAIN if the bailout value was reached, or
+ * returns 0 upon success.
+ */
+int pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((prm_read_mod_reg(pwrdm->prcm_offs, PM_PWSTST) &
+ OMAP_INTRANSITION) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c >= PWRDM_TRANSITION_BAILOUT) {
+ printk(KERN_ERR "powerdomain: waited too long for "
+ "powerdomain %s to complete transition\n", pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
new file mode 100644
index 00000000000..1e151faebbd
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -0,0 +1,187 @@
+/*
+ * OMAP2/3 common powerdomain definitions
+ *
+ * Copyright (C) 2007-8 Texas Instruments, Inc.
+ * Copyright (C) 2007-8 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Debugging and integration fixes by Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS
+#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS
+
+/*
+ * This file contains all of the powerdomains that have some element
+ * of software control for the OMAP24xx and OMAP34XX chips.
+ *
+ * A few notes:
+ *
+ * This is not an exhaustive listing of powerdomains on the chips; only
+ * powerdomains that can be controlled in software.
+ *
+ * A useful validation rule for struct powerdomain:
+ * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array
+ * must have a dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really
+ * just software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ */
+
+/*
+ * The names for the DSP/IVA2 powerdomains are confusing.
+ *
+ * Most OMAP chips have an on-board DSP.
+ *
+ * On the 2420, this is a 'C55 DSP called, simply, the DSP. Its
+ * powerdomain is called the "DSP power domain." On the 2430, the
+ * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1. Its
+ * powerdomain is still called the "DSP power domain." On the 3430,
+ * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but
+ * its powerdomain is now called the "IVA2 power domain."
+ *
+ * The 2420 also has something called the IVA, which is a separate ARM
+ * core, and has nothing to do with the DSP/IVA2.
+ *
+ * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
+ * address offset is different between the C55 and C64 DSPs.
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ */
+
+/*
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+#include <mach/powerdomain.h>
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "cm.h"
+
+/* OMAP2/3-common powerdomains and wakeup dependencies */
+
+/*
+ * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct pwrdm_dep gfx_sgx_wkdeps[] = {
+ {
+ .pwrdm_name = "core_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "iva2_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+ CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+ CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/*
+ * 3430: CM_SLEEPDEP_CAM: MPU
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ */
+static struct pwrdm_dep cam_gfx_sleepdeps[] = {
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+#include "powerdomains24xx.h"
+#include "powerdomains34xx.h"
+
+
+/*
+ * OMAP2/3 common powerdomains
+ */
+
+/*
+ * The GFX powerdomain is not present on 3430ES2, but currently we do not
+ * have a macro to filter it out at compile-time.
+ */
+static struct powerdomain gfx_pwrdm = {
+ .name = "gfx_pwrdm",
+ .prcm_offs = GFX_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+ CHIP_IS_OMAP3430ES1),
+ .wkdep_srcs = gfx_sgx_wkdeps,
+ .sleepdep_srcs = cam_gfx_sleepdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+static struct powerdomain wkup_pwrdm = {
+ .name = "wkup_pwrdm",
+ .prcm_offs = WKUP_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+ .dep_bit = OMAP_EN_WKUP_SHIFT,
+};
+
+
+
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_omap[] __initdata = {
+
+ &gfx_pwrdm,
+ &wkup_pwrdm,
+
+#ifdef CONFIG_ARCH_OMAP24XX
+ &dsp_pwrdm,
+ &mpu_24xx_pwrdm,
+ &core_24xx_pwrdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+ &mdm_pwrdm,
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+ &iva2_pwrdm,
+ &mpu_34xx_pwrdm,
+ &neon_pwrdm,
+ &core_34xx_pwrdm,
+ &cam_pwrdm,
+ &dss_pwrdm,
+ &per_pwrdm,
+ &emu_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+#endif
+
+ NULL
+};
+
+
+#endif
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
new file mode 100644
index 00000000000..9f08dc3f7fd
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -0,0 +1,200 @@
+/*
+ * OMAP24XX powerdomain definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Debugging and integration fixes by Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX
+#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX
+
+/*
+ * N.B. If powerdomains are added or removed from this file, update
+ * the array in mach-omap2/powerdomains.h.
+ */
+
+#include <mach/powerdomain.h>
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* 24XX powerdomains and dependencies */
+
+#ifdef CONFIG_ARCH_OMAP24XX
+
+
+/* Wakeup dependency source arrays */
+
+/*
+ * 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP
+ * 2430 PM_WKDEP_MDM: same as above
+ */
+static struct pwrdm_dep dsp_mdm_24xx_wkdeps[] = {
+ {
+ .pwrdm_name = "core_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ { NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
+ * 2430 adds MDM
+ */
+static struct pwrdm_dep mpu_24xx_wkdeps[] = {
+ {
+ .pwrdm_name = "core_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "dsp_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "mdm_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ },
+ { NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
+ * 2430 adds MDM
+ */
+static struct pwrdm_dep core_24xx_wkdeps[] = {
+ {
+ .pwrdm_name = "dsp_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "gfx_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .pwrdm_name = "mdm_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ },
+ { NULL },
+};
+
+
+/* Powerdomains */
+
+static struct powerdomain dsp_pwrdm = {
+ .name = "dsp_pwrdm",
+ .prcm_offs = OMAP24XX_DSP_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_mdm_24xx_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET,
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON,
+ },
+};
+
+static struct powerdomain mpu_24xx_pwrdm = {
+ .name = "mpu_pwrdm",
+ .prcm_offs = MPU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+ .dep_bit = OMAP24XX_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_24xx_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET,
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON,
+ },
+};
+
+static struct powerdomain core_24xx_pwrdm = {
+ .name = "core_pwrdm",
+ .prcm_offs = CORE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+ .wkdep_srcs = core_24xx_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .banks = 3,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
+ [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */
+ [2] = PWRSTS_OFF_RET, /* MEM3RETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+ [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
+ },
+};
+
+#endif /* CONFIG_ARCH_OMAP24XX */
+
+
+
+/*
+ * 2430-specific powerdomains
+ */
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct powerdomain mdm_pwrdm = {
+ .name = "mdm_pwrdm",
+ .prcm_offs = OMAP2430_MDM_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = dsp_mdm_24xx_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+#endif /* CONFIG_ARCH_OMAP2430 */
+
+
+#endif
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
new file mode 100644
index 00000000000..f573f710839
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -0,0 +1,327 @@
+/*
+ * OMAP34XX powerdomain definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Debugging and integration fixes by Jouni Högander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX
+#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX
+
+/*
+ * N.B. If powerdomains are added or removed from this file, update
+ * the array in mach-omap2/powerdomains.h.
+ */
+
+#include <mach/powerdomain.h>
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * 34XX-specific powerdomains, dependencies
+ */
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+/*
+ * 3430: PM_WKDEP_{PER,USBHOST}: CORE, IVA2, MPU, WKUP
+ * (USBHOST is ES2 only)
+ */
+static struct pwrdm_dep per_usbhost_wkdeps[] = {
+ {
+ .pwrdm_name = "core_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "iva2_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/*
+ * 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER
+ */
+static struct pwrdm_dep mpu_34xx_wkdeps[] = {
+ {
+ .pwrdm_name = "core_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "iva2_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "dss_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "per_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/*
+ * 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER
+ */
+static struct pwrdm_dep iva2_wkdeps[] = {
+ {
+ .pwrdm_name = "core_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "dss_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "per_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+/* 3430 PM_WKDEP_{CAM,DSS}: IVA2, MPU, WKUP */
+static struct pwrdm_dep cam_dss_wkdeps[] = {
+ {
+ .pwrdm_name = "iva2_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "wkup_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct pwrdm_dep neon_wkdeps[] = {
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+/* Sleep dependency source arrays for 34xx-specific pwrdms - 34XX only */
+
+/*
+ * 3430: CM_SLEEPDEP_{DSS,PER}: MPU, IVA
+ * 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA
+ */
+static struct pwrdm_dep dss_per_usbhost_sleepdeps[] = {
+ {
+ .pwrdm_name = "mpu_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .pwrdm_name = "iva2_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+/*
+ * Powerdomains
+ */
+
+static struct powerdomain iva2_pwrdm = {
+ .name = "iva2_pwrdm",
+ .prcm_offs = OMAP3430_IVA2_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 4,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET,
+ [1] = PWRSTS_OFF_RET,
+ [2] = PWRSTS_OFF_RET,
+ [3] = PWRSTS_OFF_RET,
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON,
+ [1] = PWRDM_POWER_ON,
+ [2] = PWRSTS_OFF_ON,
+ [3] = PWRDM_POWER_ON,
+ },
+};
+
+static struct powerdomain mpu_34xx_pwrdm = {
+ .name = "mpu_pwrdm",
+ .prcm_offs = MPU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_34xx_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET,
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_OFF_ON,
+ },
+};
+
+/* No wkdeps or sleepdeps for 34xx core apparently */
+static struct powerdomain core_34xx_pwrdm = {
+ .name = "core_pwrdm",
+ .prcm_offs = CORE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .banks = 2,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
+ [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+ },
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct powerdomain dss_pwrdm = {
+ .name = "dss_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .prcm_offs = OMAP3430_DSS_MOD,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = cam_dss_wkdeps,
+ .sleepdep_srcs = dss_per_usbhost_sleepdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+static struct powerdomain sgx_pwrdm = {
+ .name = "sgx_pwrdm",
+ .prcm_offs = OMAP3430ES2_SGX_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .wkdep_srcs = gfx_sgx_wkdeps,
+ .sleepdep_srcs = cam_gfx_sleepdeps,
+ /* XXX This is accurate for 3430 SGX, but what about GFX? */
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+static struct powerdomain cam_pwrdm = {
+ .name = "cam_pwrdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .prcm_offs = OMAP3430_CAM_MOD,
+ .wkdep_srcs = cam_dss_wkdeps,
+ .sleepdep_srcs = cam_gfx_sleepdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+static struct powerdomain per_pwrdm = {
+ .name = "per_pwrdm",
+ .prcm_offs = OMAP3430_PER_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_usbhost_wkdeps,
+ .sleepdep_srcs = dss_per_usbhost_sleepdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+static struct powerdomain emu_pwrdm = {
+ .name = "emu_pwrdm",
+ .prcm_offs = OMAP3430_EMU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain neon_pwrdm = {
+ .name = "neon_pwrdm",
+ .prcm_offs = OMAP3430_NEON_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .wkdep_srcs = neon_wkdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+};
+
+static struct powerdomain usbhost_pwrdm = {
+ .name = "usbhost_pwrdm",
+ .prcm_offs = OMAP3430ES2_USBHOST_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .wkdep_srcs = per_usbhost_wkdeps,
+ .sleepdep_srcs = dss_per_usbhost_sleepdeps,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* MEMRETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* MEMONSTATE */
+ },
+};
+
+#endif /* CONFIG_ARCH_OMAP34XX */
+
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 54c32f48213..4a32822ff3f 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -312,7 +312,8 @@
#define OMAP3430_ST_GPT2 (1 << 3)
/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
-#define OMAP3430_EN_CORE (1 << 0)
+#define OMAP3430_EN_CORE_SHIFT 0
+#define OMAP3430_EN_CORE_MASK (1 << 0)
#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index c6d17a3378e..4002051c20b 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -29,8 +29,10 @@
#define OMAP24XX_WKUP1_EN (1 << 0)
/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
-#define OMAP24XX_EN_MPU (1 << 1)
-#define OMAP24XX_EN_CORE (1 << 0)
+#define OMAP24XX_EN_MPU_SHIFT 1
+#define OMAP24XX_EN_MPU_MASK (1 << 1)
+#define OMAP24XX_EN_CORE_SHIFT 0
+#define OMAP24XX_EN_CORE_MASK (1 << 0)
/*
* PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
@@ -140,8 +142,10 @@
/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
/* PM_WKDEP_MPU specific bits */
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM (1 << 5)
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP (1 << 2)
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT 5
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK (1 << 5)
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT 2
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK (1 << 2)
/* PM_EVGENCTRL_MPU specific bits */
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index b4686bc345c..5b5ecfe6c99 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -68,7 +68,8 @@
#define OMAP3430_VPINIDLE (1 << 0)
/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
-#define OMAP3430_EN_PER (1 << 7)
+#define OMAP3430_EN_PER_SHIFT 7
+#define OMAP3430_EN_PER_MASK (1 << 7)
/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
#define OMAP3430_MEMORYCHANGE (1 << 3)
@@ -77,7 +78,7 @@
#define OMAP3430_LOGICSTATEST (1 << 2)
/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
-#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2)
+#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2)
/*
* PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
@@ -278,8 +279,10 @@
#define OMAP3430_EMULATION_MPU_RST (1 << 11)
/* PM_WKDEP_MPU specific bits */
-#define OMAP3430_PM_WKDEP_MPU_EN_DSS (1 << 5)
-#define OMAP3430_PM_WKDEP_MPU_EN_IVA2 (1 << 2)
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT 5
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK (1 << 5)
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT 2
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK (1 << 2)
/* PM_EVGENCTRL_MPU */
#define OMAP3430_OFFLOADMODE_SHIFT 3
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index bbf41fc8e9a..e4dc4b17881 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,7 +18,7 @@
#ifndef __ASSEMBLER__
#define OMAP_PRM_REGADDR(module, reg) \
- (void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+ IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
#else
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
@@ -305,7 +305,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
* 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
* PM_WKDEP_PER
*/
-#define OMAP_EN_WKUP (1 << 4)
+#define OMAP_EN_WKUP_SHIFT 4
+#define OMAP_EN_WKUP_MASK (1 << 4)
/*
* 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index adc8a26a8fb..4dcf39c285b 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -3,7 +3,7 @@
*
* OMAP2 serial support.
*
- * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Based off of arch/arm/mach-omap/omap1/serial.c
@@ -17,44 +17,39 @@
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/common.h>
#include <mach/board.h>
-static struct clk * uart1_ick = NULL;
-static struct clk * uart1_fck = NULL;
-static struct clk * uart2_ick = NULL;
-static struct clk * uart2_fck = NULL;
-static struct clk * uart3_ick = NULL;
-static struct clk * uart3_fck = NULL;
+static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
+static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE),
- .mapbase = (unsigned long)OMAP_UART1_BASE,
+ .membase = IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
- .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE),
- .mapbase = (unsigned long)OMAP_UART2_BASE,
+ .membase = IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
- .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE),
- .mapbase = (unsigned long)OMAP_UART3_BASE,
+ .membase = IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
@@ -71,7 +66,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
offset <<= p->regshift;
- __raw_writeb(value, (unsigned long)(p->membase + offset));
+ __raw_writeb(value, p->membase + offset);
}
/*
@@ -87,10 +82,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void __init omap_serial_init()
+void omap_serial_enable_clocks(int enable)
+{
+ int i;
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+ if (uart_ick[i] && uart_fck[i]) {
+ if (enable) {
+ clk_enable(uart_ick[i]);
+ clk_enable(uart_fck[i]);
+ } else {
+ clk_disable(uart_ick[i]);
+ clk_disable(uart_fck[i]);
+ }
+ }
+ }
+}
+
+void __init omap_serial_init(void)
{
int i;
const struct omap_uart_config *info;
+ char name[16];
/*
* Make sure the serial ports are muxed on at this point.
@@ -98,8 +110,7 @@ void __init omap_serial_init()
* if not needed.
*/
- info = omap_get_config(OMAP_TAG_UART,
- struct omap_uart_config);
+ info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
@@ -108,58 +119,26 @@ void __init omap_serial_init()
struct plat_serial8250_port *p = serial_platform_data + i;
if (!(info->enabled_uarts & (1 << i))) {
- p->membase = 0;
+ p->membase = NULL;
p->mapbase = 0;
continue;
}
- switch (i) {
- case 0:
- uart1_ick = clk_get(NULL, "uart1_ick");
- if (IS_ERR(uart1_ick))
- printk("Could not get uart1_ick\n");
- else {
- clk_enable(uart1_ick);
- }
-
- uart1_fck = clk_get(NULL, "uart1_fck");
- if (IS_ERR(uart1_fck))
- printk("Could not get uart1_fck\n");
- else {
- clk_enable(uart1_fck);
- }
- break;
- case 1:
- uart2_ick = clk_get(NULL, "uart2_ick");
- if (IS_ERR(uart2_ick))
- printk("Could not get uart2_ick\n");
- else {
- clk_enable(uart2_ick);
- }
-
- uart2_fck = clk_get(NULL, "uart2_fck");
- if (IS_ERR(uart2_fck))
- printk("Could not get uart2_fck\n");
- else {
- clk_enable(uart2_fck);
- }
- break;
- case 2:
- uart3_ick = clk_get(NULL, "uart3_ick");
- if (IS_ERR(uart3_ick))
- printk("Could not get uart3_ick\n");
- else {
- clk_enable(uart3_ick);
- }
-
- uart3_fck = clk_get(NULL, "uart3_fck");
- if (IS_ERR(uart3_fck))
- printk("Could not get uart3_fck\n");
- else {
- clk_enable(uart3_fck);
- }
- break;
- }
+ sprintf(name, "uart%d_ick", i+1);
+ uart_ick[i] = clk_get(NULL, name);
+ if (IS_ERR(uart_ick[i])) {
+ printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+ uart_ick[i] = NULL;
+ } else
+ clk_enable(uart_ick[i]);
+
+ sprintf(name, "uart%d_fck", i+1);
+ uart_fck[i] = clk_get(NULL, name);
+ if (IS_ERR(uart_fck[i])) {
+ printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+ uart_fck[i] = NULL;
+ } else
+ clk_enable(uart_fck[i]);
omap_serial_reset(p);
}
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep24xx.S
index 87a706fd5f8..43336b93b21 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -5,6 +5,10 @@
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -26,6 +30,8 @@
#include <mach/io.h>
#include <mach/pm.h>
+#include <mach/omap24xx.h>
+
#include "sdrc.h"
/* First address of reserved address space? apparently valid for OMAP2 & 3 */
@@ -52,15 +58,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
.word . - omap24xx_idle_loop_suspend
/*
- * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
* SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
* SDRC.
*
* Input:
* R0 : DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
+ * R1 : SDRC_DLLA_CTRL
+ * R2 : SDRC_POWER
*
* The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
* when we get called, but the DLL probably isn't. We will wait a bit more in
@@ -80,15 +85,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
*/
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mrc call
+ mov r3, #0x0 @ clear for mcr call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
nop
nop
- ldr r3, A_SDRC_POWER @ addr of sdrc power
- ldr r4, [r3] @ value of sdrc power
+ ldr r4, [r2] @ read SDRC_POWER
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
- str r4, [r3] @ make it so
+ str r4, [r2] @ make it so
mov r2, #0
nop
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
@@ -97,14 +101,13 @@ loop:
subs r5, r5, #0x1 @ awake, wait just a bit
bne loop
- /* The DPLL has on before we take the DDR out of self refresh */
+ /* The DPLL has to be on before we take the DDR out of self refresh */
bic r4, r4, #0x40 @ now clear self refresh bit.
- str r4, [r3] @ put vlaue back.
+ str r4, [r2] @ write to SDRC_POWER
ldr r4, A_SDRC0 @ make a clock happen
- ldr r4, [r4]
+ ldr r4, [r4] @ read A_SDRC0
nop @ start auto refresh only after clk ok
movs r0, r0 @ see if DDR or SDR
- ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl
strne r0, [r1] @ rewrite DLLA to force DLL reload
addne r1, r1, #0x8 @ move to DLLB
strne r0, [r1] @ rewrite DLLB to force DLL reload
@@ -116,13 +119,8 @@ loop2:
/* resume*/
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-A_SDRC_POWER:
- .word OMAP242X_SDRC_REGADDR(SDRC_POWER)
A_SDRC0:
.word A_SDRC0_V
-A_SDRC_DLLA_CTRL_S:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
ENTRY(omap24xx_cpu_suspend_sz)
.word . - omap24xx_cpu_suspend
-
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
new file mode 100644
index 00000000000..2c714613634
--- /dev/null
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+ .text
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap3_sram_configure_core_dpll)
+ stmfd sp!, {r1-r12, lr} @ store regs to stack
+ cmp r3, #0x2
+ blne configure_sdrc
+ cmp r3, #0x2
+ blne lock_dll
+ cmp r3, #0x1
+ blne unlock_dll
+ bl sdram_in_selfrefresh @ put the SDRAM in self refresh
+ bl configure_core_dpll
+ bl enable_sdrc
+ cmp r3, #0x1
+ blne wait_dll_unlock
+ cmp r3, #0x2
+ blne wait_dll_lock
+ cmp r3, #0x1
+ blne configure_sdrc
+ mov r0, #0 @ return value
+ ldmfd sp!, {r1-r12, pc} @ restore regs and return
+unlock_dll:
+ ldr r4, omap3_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ orr r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+lock_dll:
+ ldr r4, omap3_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ bic r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+sdram_in_selfrefresh:
+ mov r5, #0x0 @ Move 0 to R5
+ mcr p15, 0, r5, c7, c10, 5 @ memory barrier
+ ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+ ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r5, [r4]
+ bic r5, r5, #0x2 @ disable iclk bit for SRDC
+ str r5, [r4]
+wait_sdrc_idle:
+ ldr r4, omap3_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2 @ check for SDRC idle
+ cmp r5, #2
+ bne wait_sdrc_idle
+ bx lr
+configure_core_dpll:
+ ldr r4, omap3_cm_clksel1_pll
+ ldr r5, [r4]
+ ldr r6, core_m2_mask_val @ modify m2 for core dpll
+ and r5, r5, r6
+ orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
+ str r5, [r4]
+ mov r5, #0x800 @ wait for the clock to stabilise
+ cmp r3, #2
+ bne wait_clk_stable
+ bx lr
+wait_clk_stable:
+ subs r5, r5, #1
+ bne wait_clk_stable
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bx lr
+enable_sdrc:
+ ldr r4, omap3_cm_iclken1_core
+ ldr r5, [r4]
+ orr r5, r5, #0x2 @ enable iclk bit for SDRC
+ str r5, [r4]
+wait_sdrc_idle1:
+ ldr r4, omap3_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2
+ cmp r5, #0
+ bne wait_sdrc_idle1
+ ldr r4, omap3_sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+wait_dll_lock:
+ ldr r4, omap3_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ bx lr
+wait_dll_unlock:
+ ldr r4, omap3_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x0
+ bne wait_dll_unlock
+ bx lr
+configure_sdrc:
+ ldr r4, omap3_sdrc_rfr_ctrl
+ str r0, [r4]
+ ldr r4, omap3_sdrc_actim_ctrla
+ str r1, [r4]
+ ldr r4, omap3_sdrc_actim_ctrlb
+ str r2, [r4]
+ bx lr
+
+omap3_sdrc_power:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap3_cm_clksel1_pll:
+ .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap3_cm_idlest1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap3_cm_iclken1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap3_sdrc_rfr_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap3_sdrc_actim_ctrla:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
+omap3_sdrc_actim_ctrlb:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_dlla_status:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap3_sdrc_dlla_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+ .word 0x07FFFFFF
+
+ENTRY(omap3_sram_configure_core_dpll_sz)
+ .word . - omap3_sram_configure_core_dpll
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index ddcd41b15d1..f59a8d0e082 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -36,6 +36,12 @@ config MACH_TS209
Say 'Y' here if you want your kernel to support the
QNAP TS-109/TS-209 platform.
+config MACH_TERASTATION_PRO2
+ bool "Buffalo Terastation Pro II/Live"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Terastation Pro II/Live platform.
+
config MACH_LINKSTATION_PRO
bool "Buffalo Linkstation Pro/Live"
select I2C_BOARDINFO
@@ -44,6 +50,13 @@ config MACH_LINKSTATION_PRO
Buffalo Linkstation Pro/Live platform. Both v1 and
v2 devices are supported.
+config MACH_LINKSTATION_MINI
+ bool "Buffalo Linkstation Mini"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation Mini platform.
+
config MACH_TS409
bool "QNAP TS-409"
help
@@ -68,6 +81,13 @@ config MACH_MV2120
Say 'Y' here if you want your kernel to support the
HP Media Vault mv2120 or mv5100.
+config MACH_EDMINI_V2
+ bool "LaCie Ethernet Disk mini V2"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Ethernet Disk mini V2.
+
config MACH_MSS2
bool "Maxtor Shared Storage II"
help
@@ -92,6 +112,12 @@ config MACH_RD88F5181L_FXO
Say 'Y' here if you want your kernel to support the
Marvell Orion-VoIP FXO (88F5181L) RD.
+config MACH_RD88F6183AP_GE
+ bool "Marvell Orion-1-90 AP GE Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-1-90 (88F6183) AP GE RD.
+
endmenu
endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index fcc48a8864f..3d4a1bc1235 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -2,14 +2,18 @@ obj-y += common.o addr-map.o pci.o gpio.o irq.o mpp.o
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
+obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o
obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
+obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index bea37972120..719957e05d9 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,8 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include "common.h"
/*
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 7b11e552bc5..9625ef5975d 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/timex.h>
@@ -146,7 +147,6 @@ void __init orion5x_ehci1_init(void)
****************************************************************************/
struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
.dram = &orion5x_mbus_dram_info,
- .t_clk = ORION5X_TCLK,
};
static struct resource orion5x_eth_shared_resources[] = {
@@ -154,6 +154,10 @@ static struct resource orion5x_eth_shared_resources[] = {
.start = ORION5X_ETH_PHYS_BASE + 0x2000,
.end = ORION5X_ETH_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_ORION5X_ETH_ERR,
+ .end = IRQ_ORION5X_ETH_ERR,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -163,7 +167,7 @@ static struct platform_device orion5x_eth_shared = {
.dev = {
.platform_data = &orion5x_eth_shared_data,
},
- .num_resources = 1,
+ .num_resources = ARRAY_SIZE(orion5x_eth_shared_resources),
.resource = orion5x_eth_shared_resources,
};
@@ -268,6 +272,38 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
/*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info orion5x_spi_plat_data = {
+ .tclk = 0,
+};
+
+static struct resource orion5x_spi_resources[] = {
+ {
+ .name = "spi base",
+ .start = SPI_PHYS_BASE,
+ .end = SPI_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device orion5x_spi = {
+ .name = "orion_spi",
+ .id = 0,
+ .dev = {
+ .platform_data = &orion5x_spi_plat_data,
+ },
+ .num_resources = ARRAY_SIZE(orion5x_spi_resources),
+ .resource = orion5x_spi_resources,
+};
+
+void __init orion5x_spi_init()
+{
+ platform_device_register(&orion5x_spi);
+}
+
+
+/*****************************************************************************
* UART0
****************************************************************************/
static struct plat_serial8250_port orion5x_uart0_data[] = {
@@ -278,7 +314,7 @@ static struct plat_serial8250_port orion5x_uart0_data[] = {
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = ORION5X_TCLK,
+ .uartclk = 0,
}, {
},
};
@@ -322,7 +358,7 @@ static struct plat_serial8250_port orion5x_uart1_data[] = {
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = ORION5X_TCLK,
+ .uartclk = 0,
}, {
},
};
@@ -455,9 +491,24 @@ void __init orion5x_xor_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
+int orion5x_tclk;
+
+int __init orion5x_find_tclk(void)
+{
+ u32 dev, rev;
+
+ orion5x_pcie_id(&dev, &rev);
+ if (dev == MV88F6183_DEV_ID &&
+ (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0)
+ return 133333333;
+
+ return 166666667;
+}
+
static void orion5x_timer_init(void)
{
- orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
+ orion5x_tclk = orion5x_find_tclk();
+ orion_time_init(IRQ_ORION5X_BRIDGE, orion5x_tclk);
}
struct sys_timer orion5x_timer = {
@@ -499,6 +550,12 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
} else {
*dev_name = "MV88F5181(L)-Rev-Unsupported";
}
+ } else if (*dev == MV88F6183_DEV_ID) {
+ if (*rev == MV88F6183_REV_B0) {
+ *dev_name = "MV88F6183-Rev-B0";
+ } else {
+ *dev_name = "MV88F6183-Rev-Unsupported";
+ }
} else {
*dev_name = "Device-Unknown";
}
@@ -510,7 +567,12 @@ void __init orion5x_init(void)
u32 dev, rev;
orion5x_id(&dev, &rev, &dev_name);
- printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK);
+ printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+
+ orion5x_eth_shared_data.t_clk = orion5x_tclk;
+ orion5x_spi_plat_data.tclk = orion5x_tclk;
+ orion5x_uart0_data[0].uartclk = orion5x_tclk;
+ orion5x_uart1_data[0].uartclk = orion5x_tclk;
/*
* Setup Orion address map
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 0bd195551a2..1f8b2da676a 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -10,6 +10,7 @@ struct mv_sata_platform_data;
void orion5x_map_io(void);
void orion5x_init_irq(void);
void orion5x_init(void);
+extern int orion5x_tclk;
extern struct sys_timer orion5x_timer;
/*
@@ -30,6 +31,7 @@ void orion5x_ehci1_init(void);
void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
void orion5x_i2c_init(void);
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_spi_init(void);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
new file mode 100644
index 00000000000..b24ee0c2cd6
--- /dev/null
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -0,0 +1,262 @@
+/*
+ * arch/arm/mach-orion5x/edmini_v2-setup.c
+ *
+ * LaCie Ethernet Disk mini V2 Setup
+ *
+ * Copyright (C) 2008 Christopher Moore <moore@free.fr>
+ * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * EDMINI_V2 Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000
+#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+/*
+ * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
+ * -type device. This could cause risks of accidentally erasing critical
+ * flash sectors. We thus define a single, write-protected partition covering
+ * the whole flash.
+ * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
+ * code, break this into at least three partitions: 'u-boot code', 'u-boot
+ * environment' and 'whatever is left'.
+ */
+
+static struct mtd_partition edmini_v2_partitions[] = {
+ {
+ .name = "Full512kb",
+ .size = 0x00080000,
+ .offset = 0x00000000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data edmini_v2_nor_flash_data = {
+ .width = 1,
+ .parts = edmini_v2_partitions,
+ .nr_parts = ARRAY_SIZE(edmini_v2_partitions),
+};
+
+static struct resource edmini_v2_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = EDMINI_V2_NOR_BOOT_BASE,
+ .end = EDMINI_V2_NOR_BOOT_BASE
+ + EDMINI_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device edmini_v2_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edmini_v2_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edmini_v2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
+ .phy_addr = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define EDMINIV2_RTC_GPIO 3
+
+static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+ .irq = 0,
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+
+static struct mv_sata_platform_data edmini_v2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * GPIO LED (simple - doesn't use hardware blinking support)
+ ****************************************************************************/
+
+#define EDMINI_V2_GPIO_LED_POWER 16
+
+static struct gpio_led edmini_v2_leds[] = {
+ {
+ .name = "power:blue",
+ .gpio = EDMINI_V2_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data edmini_v2_led_data = {
+ .num_leds = ARRAY_SIZE(edmini_v2_leds),
+ .leds = edmini_v2_leds,
+};
+
+static struct platform_device edmini_v2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &edmini_v2_led_data,
+ },
+};
+
+/****************************************************************************
+ * GPIO key
+ ****************************************************************************/
+
+#define EDMINI_V2_GPIO_KEY_POWER 18
+
+static struct gpio_keys_button edmini_v2_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = EDMINI_V2_GPIO_KEY_POWER,
+ .desc = "Power Button",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data edmini_v2_button_data = {
+ .buttons = edmini_v2_buttons,
+ .nbuttons = ARRAY_SIZE(edmini_v2_buttons),
+};
+
+static struct platform_device edmini_v2_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &edmini_v2_button_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED },
+ { 1, MPP_UNUSED },
+ { 2, MPP_UNUSED },
+ { 3, MPP_GPIO }, /* RTC interrupt */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_UNUSED },
+ { 7, MPP_UNUSED },
+ { 8, MPP_UNUSED },
+ { 9, MPP_UNUSED },
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED }, /* SATA 0 presence */
+ { 13, MPP_SATA_LED }, /* SATA 1 presence */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ /* 16: Power LED control (0 = On, 1 = Off) */
+ { 16, MPP_GPIO },
+ /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
+ { 17, MPP_GPIO },
+ /* 18: Power button status (0 = Released, 1 = Pressed) */
+ { 18, MPP_GPIO },
+ { 19, MPP_UNUSED },
+ { -1 }
+};
+
+static void __init edmini_v2_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(edminiv2_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&edmini_v2_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&edmini_v2_sata_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
+ EDMINI_V2_NOR_BOOT_SIZE);
+ platform_device_register(&edmini_v2_nor_flash);
+ platform_device_register(&edmini_v2_gpio_leds);
+ platform_device_register(&edmini_v2_gpio_buttons);
+
+ pr_notice("edmini_v2: USB device port, flash write and power-off "
+ "are not yet supported.\n");
+
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
+ edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
+ else
+ gpio_free(EDMINIV2_RTC_GPIO);
+ }
+
+ if (edmini_v2_i2c_rtc.irq == 0)
+ pr_warning("edmini_v2: failed to get RTC IRQ\n");
+
+ i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
+ /* Maintainer: Christopher Moore <moore@free.fr> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = edmini_v2_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index cd8a16f67d2..fc419868e39 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -15,8 +15,8 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
+#include <linux/io.h>
#include <asm/gpio.h>
-#include <asm/io.h>
#include <mach/orion5x.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 61eb74a8886..e67c843baa0 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -2,7 +2,7 @@
* arch/arm/mach-orion5x/include/mach/orion5x.h
*
* Generic definitions of Orion SoC flavors:
- * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ * Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
@@ -76,6 +76,9 @@
#define MV88F5281_REV_D0 4
#define MV88F5281_REV_D1 5
#define MV88F5281_REV_D2 6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID 0x6183
+#define MV88F6183_REV_B0 3
/*******************************************************************************
* Orion Registers Map
@@ -86,6 +89,7 @@
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
index e82e44db762..4c69820e081 100644
--- a/arch/arm/mach-orion5x/include/mach/timex.h
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -9,5 +9,3 @@
*/
#define CLOCK_TICK_RATE (100 * HZ)
-
-#define ORION5X_TCLK 166666667
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 2545ff9e583..632a36f5cf1 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -13,8 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/gpio.h>
-#include <asm/io.h>
#include <mach/orion5x.h>
#include <plat/irq.h>
#include "common.h"
@@ -162,7 +162,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
polarity ^= 1 << pin;
writel(polarity, GPIO_IN_POL);
}
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
}
}
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index e321ec33183..c5bd54d8aa0 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -293,7 +293,7 @@ static void kurobox_pro_power_off(void)
const unsigned char shutdownwait[] = {0x00, 0x0c};
const unsigned char poweroff[] = {0x00, 0x06};
/* 38400 baud divisor */
- const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
+ const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
pr_info("%s: triggering power-off...\n", __func__);
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
new file mode 100644
index 00000000000..e0c43b8beb7
--- /dev/null
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -0,0 +1,279 @@
+/*
+ * arch/arm/mach-orion5x/lsmini-setup.c
+ *
+ * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "include/mach/system.h"
+
+/*****************************************************************************
+ * Linkstation Mini Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LSMINI_NOR_BOOT_BASE 0xf4000000
+#define LSMINI_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data lsmini_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource lsmini_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = LSMINI_NOR_BOOT_BASE,
+ .end = LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lsmini_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lsmini_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &lsmini_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data lsmini_eth_data = {
+ .phy_addr = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata lsmini_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LSMINI_GPIO_LED_ALARM 2
+#define LSMINI_GPIO_LED_INFO 3
+#define LSMINI_GPIO_LED_FUNC 9
+#define LSMINI_GPIO_LED_PWR 14
+
+static struct gpio_led lsmini_led_pins[] = {
+ {
+ .name = "alarm:red",
+ .gpio = LSMINI_GPIO_LED_ALARM,
+ .active_low = 1,
+ }, {
+ .name = "info:amber",
+ .gpio = LSMINI_GPIO_LED_INFO,
+ .active_low = 1,
+ }, {
+ .name = "func:blue:top",
+ .gpio = LSMINI_GPIO_LED_FUNC,
+ .active_low = 1,
+ }, {
+ .name = "power:blue:bottom",
+ .gpio = LSMINI_GPIO_LED_PWR,
+ },
+};
+
+static struct gpio_led_platform_data lsmini_led_data = {
+ .leds = lsmini_led_pins,
+ .num_leds = ARRAY_SIZE(lsmini_led_pins),
+};
+
+static struct platform_device lsmini_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lsmini_led_data,
+ },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+
+#define LSMINI_GPIO_KEY_FUNC 15
+#define LSMINI_GPIO_KEY_POWER 18
+#define LSMINI_GPIO_KEY_AUTOPOWER 17
+
+#define LSMINI_SW_POWER 0x00
+#define LSMINI_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button lsmini_buttons[] = {
+ {
+ .code = KEY_OPTION,
+ .gpio = LSMINI_GPIO_KEY_FUNC,
+ .desc = "Function Button",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LSMINI_SW_POWER,
+ .gpio = LSMINI_GPIO_KEY_POWER,
+ .desc = "Power-on Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LSMINI_SW_AUTOPOWER,
+ .gpio = LSMINI_GPIO_KEY_AUTOPOWER,
+ .desc = "Power-auto Switch",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data lsmini_button_data = {
+ .buttons = lsmini_buttons,
+ .nbuttons = ARRAY_SIZE(lsmini_buttons),
+};
+
+static struct platform_device lsmini_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &lsmini_button_data,
+ },
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data lsmini_sata_data = {
+ .n_ports = 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation Mini specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation Mini, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ */
+
+static void lsmini_power_off(void)
+{
+ arch_reset(0);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LSMINI_GPIO_USB_POWER 16
+#define LSMINI_GPIO_AUTO_POWER 17
+#define LSMINI_GPIO_POWER 18
+
+#define LSMINI_GPIO_HDD_POWER0 1
+#define LSMINI_GPIO_HDD_POWER1 19
+
+static struct orion5x_mpp_mode lsmini_mpp_modes[] __initdata = {
+ { 0, MPP_UNUSED }, /* LED_RESERVE1 (unused) */
+ { 1, MPP_GPIO }, /* HDD_PWR */
+ { 2, MPP_GPIO }, /* LED_ALARM */
+ { 3, MPP_GPIO }, /* LED_INFO */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_UNUSED },
+ { 7, MPP_UNUSED },
+ { 8, MPP_UNUSED },
+ { 9, MPP_GPIO }, /* LED_FUNC */
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_GPIO }, /* LED_PWR */
+ { 15, MPP_GPIO }, /* FUNC */
+ { 16, MPP_GPIO }, /* USB_PWR */
+ { 17, MPP_GPIO }, /* AUTO_POWER */
+ { 18, MPP_GPIO }, /* POWER */
+ { 19, MPP_GPIO }, /* HDD_PWR1 */
+ { -1 },
+};
+
+static void __init lsmini_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(lsmini_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&lsmini_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&lsmini_sata_data);
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE,
+ LSMINI_NOR_BOOT_SIZE);
+ platform_device_register(&lsmini_nor_flash);
+
+ platform_device_register(&lsmini_button_device);
+
+ platform_device_register(&lsmini_leds);
+
+ i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
+
+ /* enable USB power */
+ gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
+
+ /* register power-off method */
+ pm_power_off = lsmini_power_off;
+
+ pr_info("%s: finished\n", __func__);
+}
+
+#ifdef CONFIG_MACH_LINKSTATION_MINI
+MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
+ /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = lsmini_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index c04ab0e16ea..640ea2a3fc6 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,8 +11,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
new file mode 100644
index 00000000000..40e04953909
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
+ *
+ * Marvell Orion-1-90 AP GE Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/ethtool.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
+ .phy_addr = -1,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct mtd_partition rd88f6183ap_ge_partitions[] = {
+ {
+ .name = "kernel",
+ .offset = 0x00000000,
+ .size = 0x00200000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x00200000,
+ .size = 0x00500000,
+ }, {
+ .name = "nvram",
+ .offset = 0x00700000,
+ .size = 0x00080000,
+ },
+};
+
+static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
+ .type = "m25p64",
+ .nr_parts = ARRAY_SIZE(rd88f6183ap_ge_partitions),
+ .parts = rd88f6183ap_ge_partitions,
+};
+
+static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &rd88f6183ap_ge_spi_slave_data,
+ .irq = NO_IRQ,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static void __init rd88f6183ap_ge_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&rd88f6183ap_ge_eth_data);
+ spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
+ ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
+ orion5x_spi_init();
+ orion5x_uart0_init();
+}
+
+static struct hw_pci rd88f6183ap_ge_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = orion5x_pci_map_irq,
+};
+
+static int __init rd88f6183ap_ge_pci_init(void)
+{
+ if (machine_is_rd88f6183ap_ge()) {
+ orion5x_pci_disable();
+ pci_common_init(&rd88f6183ap_ge_pci);
+ }
+
+ return 0;
+}
+subsys_initcall(rd88f6183ap_ge_pci_init);
+
+MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f6183ap_ge_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
new file mode 100644
index 00000000000..0b101d7d41c
--- /dev/null
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -0,0 +1,369 @@
+/*
+ * Buffalo Terastation Pro II/Live Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Terastation Pro 2/Live Info
+ ****************************************************************************/
+
+/*
+ * Terastation Pro 2 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX6042 SATA controller (PCI)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - 256KB NOR flash
+ * - 128MB of DDR RAM
+ * - PCIe port (not equipped)
+ */
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define TSP2_NOR_BOOT_BASE 0xf4000000
+#define TSP2_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data tsp2_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource tsp2_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = TSP2_NOR_BOOT_BASE,
+ .end = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device tsp2_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &tsp2_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &tsp2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+#define TSP2_PCI_SLOT0_OFFS 7
+#define TSP2_PCI_SLOT0_IRQ_PIN 11
+
+void __init tsp2_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = TSP2_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "tsp2_pci_preinit failed "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "tsp2_pci_preinit failed to "
+ "gpio_request %d\n", pin);
+ }
+}
+
+static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI IRQs are connected via GPIOs.
+ */
+ if (slot == TSP2_PCI_SLOT0_OFFS)
+ return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN);
+
+ return -1;
+}
+
+static struct hw_pci tsp2_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = tsp2_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = tsp2_pci_map_irq,
+};
+
+static int __init tsp2_pci_init(void)
+{
+ if (machine_is_terastation_pro2())
+ pci_common_init(&tsp2_pci);
+
+ return 0;
+}
+
+subsys_initcall(tsp2_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data tsp2_eth_data = {
+ .phy_addr = 0,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define TSP2_RTC_GPIO 9
+
+static struct i2c_board_info __initdata tsp2_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * Terastation Pro II specific power off method via UART1-attached
+ * microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int tsp2_miconread(unsigned char *buf, int count)
+{
+ int i;
+ int timeout;
+
+ for (i = 0; i < count; i++) {
+ timeout = 10;
+
+ while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+ if (--timeout == 0)
+ break;
+ udelay(1000);
+ }
+
+ if (timeout == 0)
+ break;
+ buf[i] = readl(UART1_REG(RX));
+ }
+
+ /* return read bytes */
+ return i;
+}
+
+static int tsp2_miconwrite(const unsigned char *buf, int count)
+{
+ int i = 0;
+
+ while (count--) {
+ while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+ barrier();
+ writel(buf[i++], UART1_REG(TX));
+ }
+
+ return 0;
+}
+
+static int tsp2_miconsend(const unsigned char *data, int count)
+{
+ int i;
+ unsigned char checksum = 0;
+ unsigned char recv_buf[40];
+ unsigned char send_buf[40];
+ unsigned char correct_ack[3];
+ int retry = 2;
+
+ /* Generate checksum */
+ for (i = 0; i < count; i++)
+ checksum -= data[i];
+
+ do {
+ /* Send data */
+ tsp2_miconwrite(data, count);
+
+ /* send checksum */
+ tsp2_miconwrite(&checksum, 1);
+
+ if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+ printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+ /* send preamble to clear the receive buffer */
+ memset(&send_buf, 0xff, sizeof(send_buf));
+ tsp2_miconwrite(send_buf, sizeof(send_buf));
+
+ /* make dummy reads */
+ mdelay(100);
+ tsp2_miconread(recv_buf, sizeof(recv_buf));
+ } else {
+ /* Generate expected ack */
+ correct_ack[0] = 0x01;
+ correct_ack[1] = data[1];
+ correct_ack[2] = 0x00;
+
+ /* checksum Check */
+ if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+ recv_buf[3]) & 0xFF) {
+ printk(KERN_ERR ">%s: Checksum Error : "
+ "Received data[%02x, %02x, %02x, %02x]"
+ "\n", __func__, recv_buf[0],
+ recv_buf[1], recv_buf[2], recv_buf[3]);
+ } else {
+ /* Check Received Data */
+ if (correct_ack[0] == recv_buf[0] &&
+ correct_ack[1] == recv_buf[1] &&
+ correct_ack[2] == recv_buf[2]) {
+ /* Interval for next command */
+ mdelay(10);
+
+ /* Receive ACK */
+ return 0;
+ }
+ }
+ /* Received NAK or illegal Data */
+ printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+ "Received\n", __func__);
+ }
+ } while (retry--);
+
+ /* Interval for next command */
+ mdelay(10);
+
+ return -1;
+}
+
+static void tsp2_power_off(void)
+{
+ const unsigned char watchdogkill[] = {0x01, 0x35, 0x00};
+ const unsigned char shutdownwait[] = {0x00, 0x0c};
+ const unsigned char poweroff[] = {0x00, 0x06};
+ /* 38400 baud divisor */
+ const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x1b, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x07, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* Send the commands to shutdown the Terastation Pro II */
+ tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+ tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+ tsp2_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = {
+ { 0, MPP_PCIE_RST_OUTn },
+ { 1, MPP_UNUSED },
+ { 2, MPP_UNUSED },
+ { 3, MPP_UNUSED },
+ { 4, MPP_NAND }, /* BOOT NAND Flash REn */
+ { 5, MPP_NAND }, /* BOOT NAND Flash WEn */
+ { 6, MPP_NAND }, /* BOOT NAND Flash HREn[0] */
+ { 7, MPP_NAND }, /* BOOT NAND Flash WEn[0] */
+ { 8, MPP_GPIO }, /* MICON int */
+ { 9, MPP_GPIO }, /* RTC int */
+ { 10, MPP_UNUSED },
+ { 11, MPP_GPIO }, /* PCI Int A */
+ { 12, MPP_UNUSED },
+ { 13, MPP_GPIO }, /* UPS on UART0 enable */
+ { 14, MPP_GPIO }, /* UPS low battery detection */
+ { 15, MPP_UNUSED },
+ { 16, MPP_UART }, /* UART1 RXD */
+ { 17, MPP_UART }, /* UART1 TXD */
+ { 18, MPP_UART }, /* UART1 CTSn */
+ { 19, MPP_UART }, /* UART1 RTSn */
+ { -1 },
+};
+
+static void __init tsp2_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(tsp2_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
+ TSP2_NOR_BOOT_SIZE);
+ platform_device_register(&tsp2_nor_flash);
+
+ orion5x_ehci0_init();
+ orion5x_eth_init(&tsp2_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+ orion5x_uart1_init();
+
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(TSP2_RTC_GPIO) == 0)
+ tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO);
+ else
+ gpio_free(TSP2_RTC_GPIO);
+ }
+ if (tsp2_i2c_rtc.irq == 0)
+ pr_warning("tsp2_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
+
+ /* register Terastation Pro II specific power-off method */
+ pm_power_off = tsp2_power_off;
+}
+
+MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
+ /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = tsp2_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
index 83feac3147a..5128da1101b 100644
--- a/arch/arm/mach-orion5x/tsx09-common.c
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -16,6 +16,7 @@
#include <linux/timex.h>
#include <linux/serial_reg.h>
#include "tsx09-common.h"
+#include "common.h"
/*****************************************************************************
* QNAP TS-x09 specific power off method via UART1-attached PIC
@@ -26,7 +27,7 @@
void qnap_tsx09_power_off(void)
{
/* 19200 baud divisor */
- const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 24d036a24a7..898c0e88acb 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -20,9 +20,9 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/clock.h>
#include "clock.h"
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 3ba46ede9bb..45734bb880a 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -25,9 +25,9 @@
#include <linux/serial_8250.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index 833c56be734..ac2f70eddb9 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -21,12 +21,12 @@
#include <linux/err.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/dma.h>
#include <asm/dma-mapping.h>
-#include <asm/io.h>
#include <asm/mach/dma.h>
#include <mach/clock.h>
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index fb51f7279e9..015cc21d5f5 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -17,7 +17,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/platform.h>
#include <mach/gpio.h>
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index 8985a4622b8..e12e7abfcbc 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -21,8 +21,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/platform.h>
static void arch_idle(void)
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
index 956fbd8e977..5ff0196c0f1 100644
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -14,8 +14,8 @@
#ifndef __PNX4008_TIMEX_H
#define __PNX4008_TIMEX_H
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#define CLOCK_TICK_RATE 1000000
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 5c4f55af5d4..a9ce02b4bf1 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,8 +23,8 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index f970906d884..b3d8d53e32e 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -18,8 +18,8 @@
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/cacheflush.h>
#include <mach/pm.h>
#include <mach/clock.h>
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 9be84bbb30e..f40961e5191 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -12,8 +12,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/platform.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 180975244f9..fc0ba183fe1 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -22,10 +22,10 @@
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e8ee7ec9ff6..f27f6b3d6e6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -38,16 +38,23 @@ config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
select SA1111
+ select PXA_HAVE_BOARD_IRQS
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
select PXA27x
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MP900C
+ bool "Nec Mobilepro 900/c"
+ select PXA25x
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
@@ -114,10 +121,21 @@ config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
+ select PXA_HAVE_BOARD_IRQS
+
+config ARCH_VIPER
+ bool "Arcom/Eurotech VIPER SBC"
+ select PXA25x
+ select ISA
+ select I2C_GPIO
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+ select PXA_HAVE_ISA_IRQS
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
+ select PXA_HAVE_BOARD_IRQS
config MACH_E330
bool "Toshiba e330"
@@ -170,13 +188,41 @@ config MACH_E800
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
+config TRIZEPS_PXA
+ bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
select PXA27x
-config MACH_TRIZEPS4_CONXS
+config MACH_TRIZEPS4WL
+ bool "Keith und Koep Trizeps4-WL DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+ select PXA_SSP
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
- depends on MACH_TRIZEPS4
+
+config MACH_TRIZEPS_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+ bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
@@ -189,6 +235,7 @@ config MACH_COLIBRI
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
+ select PXA_SSP
select HAVE_PWM
config MACH_LITTLETON
@@ -207,20 +254,42 @@ config MACH_SAAR
select PXA930
config MACH_ARMCORE
- bool "CompuLab CM-X270 modules"
+ bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
+ select ZONE_DMA if PCI
+ select PXA25x
+ select PXA_SSP
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select PXA3xx
+ select CPU_PXA300
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+ bool "Mitac Mio A701 Support"
+ select PXA27x
+ select IWMMXT
+ select LEDS_GPIO
+ select HAVE_PWM
+ select GPIO_SYSFS
+ help
+ Say Y here if you intend to run this kernel on a
+ MIO A701. Currently there is only basic support
+ for this PDA.
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
+ select PXA_HAVE_BOARD_IRQS
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
@@ -236,6 +305,16 @@ config MACH_PALMTX
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
+config MACH_PALMZ72
+ bool "Palm Zire 72"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on Palm Zire 72
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
@@ -256,6 +335,9 @@ config PCM990_DISPLAY_NONE
endchoice
+config MACH_AM200EPD
+ depends on MACH_GUMSTIX_F
+ bool "Enable AM200EPD board support"
config PXA_EZX
bool "Motorola EZX Platform"
@@ -343,4 +425,10 @@ config TOSA_BT
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
+config PXA_HAVE_BOARD_IRQS
+ bool
+
+config PXA_HAVE_ISA_IRQS
+ bool
+
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 99ecbe7f850..d31c9979cfa 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -6,7 +6,12 @@
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
+
+ifeq ($(CONFIG_CPU_FREQ),y)
+obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o
+endif
# Generic drivers that other drivers may depend upon
obj-$(CONFIG_PXA_SSP) += ssp.o
@@ -22,27 +27,33 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
+obj-$(CONFIG_MACH_AM200EPD) += am200epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
-obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
-obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o
-obj-$(CONFIG_MACH_E740) += e740_lcd.o
-obj-$(CONFIG_MACH_E750) += e750_lcd.o
-obj-$(CONFIG_MACH_E400) += e400_lcd.o
-obj-$(CONFIG_MACH_E800) += e800_lcd.o
+obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
+obj-$(CONFIG_MACH_E330) += e330.o
+obj-$(CONFIG_MACH_E350) += e350.o
+obj-$(CONFIG_MACH_E740) += e740.o
+obj-$(CONFIG_MACH_E750) += e750.o
+obj-$(CONFIG_MACH_E400) += e400.o
+obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
+obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
@@ -53,7 +64,8 @@ obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
+obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
# Support for blinky lights
@@ -61,12 +73,11 @@ led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
deleted file mode 100644
index 5c67b188a3b..00000000000
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita)
- * (uses a Maxim MAX7310 8 Port IO Expander)
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <richard@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <mach/akita.h>
-
-/* MAX7310 Regiser Map */
-#define MAX7310_INPUT 0x00
-#define MAX7310_OUTPUT 0x01
-#define MAX7310_POLINV 0x02
-#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */
-#define MAX7310_TIMEOUT 0x04
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
-
-/* I2C Magic */
-I2C_CLIENT_INSMOD;
-
-static int max7310_write(struct i2c_client *client, int address, int data);
-static struct i2c_client max7310_template;
-static void akita_ioexp_work(struct work_struct *private_);
-
-static struct device *akita_ioexp_device;
-static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
-DECLARE_WORK(akita_ioexp, akita_ioexp_work);
-
-
-/*
- * MAX7310 Access
- */
-static int max7310_config(struct device *dev, int iomode, int polarity)
-{
- int ret;
- struct i2c_client *client = to_i2c_client(dev);
-
- ret = max7310_write(client, MAX7310_POLINV, polarity);
- if (ret < 0)
- return ret;
- ret = max7310_write(client, MAX7310_IODIR, iomode);
- return ret;
-}
-
-static int max7310_set_ouputs(struct device *dev, int outputs)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- return max7310_write(client, MAX7310_OUTPUT, outputs);
-}
-
-/*
- * I2C Functions
- */
-static int max7310_write(struct i2c_client *client, int address, int value)
-{
- u8 data[2];
-
- data[0] = address & 0xff;
- data[1] = value & 0xff;
-
- if (i2c_master_send(client, data, 2) == 2)
- return 0;
- return -1;
-}
-
-static int max7310_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- int err;
-
- if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
- return -ENOMEM;
-
- max7310_template.adapter = adapter;
- max7310_template.addr = address;
-
- memcpy(new_client, &max7310_template, sizeof(struct i2c_client));
-
- if ((err = i2c_attach_client(new_client))) {
- kfree(new_client);
- return err;
- }
-
- max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0);
- akita_ioexp_device = &new_client->dev;
- schedule_work(&akita_ioexp);
-
- return 0;
-}
-
-static int max7310_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, max7310_detect);
-}
-
-static int max7310_detach_client(struct i2c_client *client)
-{
- int err;
-
- akita_ioexp_device = NULL;
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(client);
- return 0;
-}
-
-static struct i2c_driver max7310_i2c_driver = {
- .driver = {
- .name = "akita-max7310",
- },
- .id = I2C_DRIVERID_AKITAIOEXP,
- .attach_adapter = max7310_attach_adapter,
- .detach_client = max7310_detach_client,
-};
-
-static struct i2c_client max7310_template = {
- name: "akita-max7310",
- driver: &max7310_i2c_driver,
-};
-
-void akita_set_ioexp(struct device *dev, unsigned char bit)
-{
- ioexp_output_value |= bit;
-
- if (akita_ioexp_device)
- schedule_work(&akita_ioexp);
- return;
-}
-
-void akita_reset_ioexp(struct device *dev, unsigned char bit)
-{
- ioexp_output_value &= ~bit;
-
- if (akita_ioexp_device)
- schedule_work(&akita_ioexp);
- return;
-}
-
-EXPORT_SYMBOL(akita_set_ioexp);
-EXPORT_SYMBOL(akita_reset_ioexp);
-
-static void akita_ioexp_work(struct work_struct *private_)
-{
- if (akita_ioexp_device)
- max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);
-}
-
-
-#ifdef CONFIG_PM
-static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state)
-{
- flush_scheduled_work();
- return 0;
-}
-
-static int akita_ioexp_resume(struct platform_device *pdev)
-{
- schedule_work(&akita_ioexp);
- return 0;
-}
-#else
-#define akita_ioexp_suspend NULL
-#define akita_ioexp_resume NULL
-#endif
-
-static int __init akita_ioexp_probe(struct platform_device *pdev)
-{
- return i2c_add_driver(&max7310_i2c_driver);
-}
-
-static int akita_ioexp_remove(struct platform_device *pdev)
-{
- i2c_del_driver(&max7310_i2c_driver);
- return 0;
-}
-
-static struct platform_driver akita_ioexp_driver = {
- .probe = akita_ioexp_probe,
- .remove = akita_ioexp_remove,
- .suspend = akita_ioexp_suspend,
- .resume = akita_ioexp_resume,
- .driver = {
- .name = "akita-ioexp",
- },
-};
-
-static int __init akita_ioexp_init(void)
-{
- return platform_driver_register(&akita_ioexp_driver);
-}
-
-static void __exit akita_ioexp_exit(void)
-{
- platform_driver_unregister(&akita_ioexp_driver);
-}
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Akita IO-Expander driver");
-MODULE_LICENSE("GPL");
-
-fs_initcall(akita_ioexp_init);
-module_exit(akita_ioexp_exit);
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
new file mode 100644
index 00000000000..b965085a37b
--- /dev/null
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -0,0 +1,374 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/pxafb.h>
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+ .pixclock = 40000,
+ .xres = 1200,
+ .yres = 842,
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 2,
+ .right_margin = 2,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 25,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+ .pixclock = 40000,
+ .xres = 1088,
+ .yres = 791,
+ .bpp = 16,
+ .hsync_len = 28,
+ .left_margin = 8,
+ .right_margin = 30,
+ .vsync_len = 8,
+ .upper_margin = 10,
+ .lower_margin = 8,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+ .pixclock = 40189,
+ .xres = 832,
+ .yres = 622,
+ .bpp = 16,
+ .hsync_len = 28,
+ .left_margin = 34,
+ .right_margin = 34,
+ .vsync_len = 25,
+ .upper_margin = 0,
+ .lower_margin = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+ .modes = &am200_fb_mode_6inch,
+ .num_modes = 1,
+ .lcd_conn = LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+ RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+ int i;
+ int err;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am200_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ gpio_direction_output(LED_GPIO_PIN, 0);
+ gpio_direction_output(STDBY_GPIO_PIN, 0);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(ERR_GPIO_PIN);
+
+ gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+ return 0;
+
+err_req_gpio:
+ while (i > 0)
+ gpio_free(gpios[i--]);
+
+ return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+ int i;
+
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+ /* rough check if this is our desired fb and not something else */
+ if ((info->var.xres != am200_fb_info.modes->xres)
+ || (info->var.yres != am200_fb_info.modes->yres))
+ return 0;
+
+ /* we've now been notified that we have our new fb */
+ am200_board.metromem = info->screen_base;
+ am200_board.host_fbinfo = info;
+
+ /* try to refcount host drv since we are the consumer after this */
+ if (!try_module_get(info->fbops->owner))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+ dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+ if (info != am200_board.host_fbinfo)
+ return 0;
+
+ module_put(am200_board.host_fbinfo->fbops->owner);
+ return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct fb_event *evdata = data;
+ struct fb_info *info = evdata->info;
+
+ dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+ if (event == FB_EVENT_FB_REGISTERED)
+ return am200_share_video_mem(info);
+ else if (event == FB_EVENT_FB_UNREGISTERED)
+ return am200_unshare_video_mem(info);
+
+ return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+ .notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use set_pxa_fb_info */
+static void __init am200_presetup_fb(void)
+{
+ int fw;
+ int fh;
+ int padding_size;
+ int totalsize;
+
+ switch (panel_type) {
+ case 6:
+ am200_fb_info.modes = &am200_fb_mode_6inch;
+ break;
+ case 8:
+ am200_fb_info.modes = &am200_fb_mode_8inch;
+ break;
+ case 97:
+ am200_fb_info.modes = &am200_fb_mode_9inch7;
+ break;
+ default:
+ dev_err(&am200_device->dev, "invalid panel_type selection,"
+ " setting to 6\n");
+ am200_fb_info.modes = &am200_fb_mode_6inch;
+ break;
+ }
+
+ /* the frame buffer is divided as follows:
+ command | CRC | padding
+ 16kb waveform data | CRC | padding
+ image data | CRC
+ */
+
+ fw = am200_fb_info.modes->xres;
+ fh = am200_fb_info.modes->yres;
+
+ /* waveform must be 16k + 2 for checksum */
+ am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+ padding_size = PAGE_SIZE + (4 * fw);
+
+ /* total is 1 cmd , 1 wfm, padding and image */
+ totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+ /* save this off because we're manipulating fw after this and
+ * we'll need it when we're ready to setup the framebuffer */
+ am200_board.fw = fw;
+ am200_board.fh = fh;
+
+ /* the reason we do this adjustment is because we want to acquire
+ * more framebuffer memory without imposing custom awareness on the
+ * underlying pxafb driver */
+ am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+ /* we divide since we told the LCD controller we're 16bpp */
+ am200_fb_info.modes->xres /= 2;
+
+ set_pxa_fb_info(&am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+ int fw;
+ int fh;
+
+ fw = am200_board.fw;
+ fh = am200_board.fh;
+
+ /* metromem was set up by the notifier in share_video_mem so now
+ * we can use its value to calculate the other entries */
+ par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+ par->metromem_wfm = am200_board.metromem + fw;
+ par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+ par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+ par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+ return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+ struct metronomefb_par *par = dev_id;
+
+ wake_up_interruptible(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+ IRQF_DISABLED|IRQF_TRIGGER_FALLING,
+ "AM200", info->par);
+ if (ret)
+ dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+ gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+ gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+ return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+ return wait_event_interruptible_timeout(par->waitq,
+ gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+ .owner = THIS_MODULE,
+ .setup_irq = am200_setup_irq,
+ .setup_io = am200_init_gpio_regs,
+ .setup_fb = am200_setup_fb,
+ .set_rst = am200_set_rst,
+ .set_stdby = am200_set_stdby,
+ .met_wait_event = am200_wait_event,
+ .met_wait_event_intr = am200_wait_event_intr,
+ .get_panel_type = am200_get_panel_type,
+ .cleanup = am200_cleanup,
+};
+
+static int __init am200_init(void)
+{
+ int ret;
+
+ /* before anything else, we request notification for any fb
+ * creation events */
+ fb_register_client(&am200_fb_notif);
+
+ /* request our platform independent driver */
+ request_module("metronomefb");
+
+ am200_device = platform_device_alloc("metronomefb", -1);
+ if (!am200_device)
+ return -ENOMEM;
+
+ /* the am200_board that will be seen by metronomefb is a copy */
+ platform_device_add_data(am200_device, &am200_board,
+ sizeof(am200_board));
+
+ /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+ ret = platform_device_add(am200_device);
+
+ if (ret) {
+ platform_device_put(am200_device);
+ fb_unregister_client(&am200_fb_notif);
+ return ret;
+ }
+
+ am200_presetup_fb();
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+module_init(am200_init);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 00000000000..83a4cdf0817
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/bitfield.h>
+
+#include "generic.h"
+
+#define GPIO_NAND_CS (5)
+#define GPIO_NAND_ALE (4)
+#define GPIO_NAND_CLE (3)
+#define GPIO_NAND_RB (10)
+
+static unsigned long cmx255_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP2 */
+ GPIO81_SSP2_CLK_OUT,
+ GPIO82_SSP2_FRM_OUT,
+ GPIO83_SSP2_TXD,
+ GPIO84_SSP2_RXD,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO9_GPIO, /* PC card reset */
+
+ /* NAND controls */
+ GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */
+ GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */
+ GPIO10_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO22_GPIO, /* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "rtc-max6902",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
+static void __init cmx255_init_rtc(void)
+{
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+ spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+ {
+ .name = "ARMmon",
+ .size = 0x00030000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "ARMmon setup block",
+ .size = 0x00010000,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "kernel",
+ .size = 0x00160000,
+ .offset = MTDPART_OFS_APPEND,
+ } , {
+ .name = "ramdisk",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND
+ }
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = cmx255_nor_partitions,
+ .nr_parts = ARRAY_SIZE(cmx255_nor_partitions)
+ }
+};
+
+static struct resource cmx255_nor_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = cmx255_nor_flash_data,
+ },
+ .resource = &cmx255_nor_resource,
+ .num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+ platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+static struct resource cmx255_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + 11,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS5_PHYS,
+ .end = PXA_CS5_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+ [0] = {
+ .name = "cmx255-nand",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ },
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+ .gpio_nce = GPIO_NAND_CS,
+ .gpio_cle = GPIO_NAND_CLE,
+ .gpio_ale = GPIO_NAND_ALE,
+ .gpio_rdy = GPIO_NAND_RB,
+ .gpio_nwp = -1,
+ .parts = cmx255_nand_parts,
+ .num_parts = ARRAY_SIZE(cmx255_nand_parts),
+ .chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+ .name = "gpio-nand",
+ .num_resources = ARRAY_SIZE(cmx255_nand_resource),
+ .resource = cmx255_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx255_nand_platdata,
+ }
+};
+
+static void __init cmx255_init_nand(void)
+{
+ platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+ cmx255_init_rtc();
+ cmx255_init_nor();
+ cmx255_init_nand();
+}
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
deleted file mode 100644
index 48f532f4cb5..00000000000
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx270_pci_init_irq(int irq_gpio);
-extern void __cmx270_pci_suspend(void);
-extern void __cmx270_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
-#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
-#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
-#else
-#define cmx270_pci_init_irq(x) do {} while (0)
-#define cmx270_pci_suspend(x) do {} while (0)
-#define cmx270_pci_resume(x) do {} while (0)
-#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index af003a26953..a82dad1a8cc 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,46 +14,22 @@
#include <linux/irq.h>
#include <linux/gpio.h>
-#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
-#include <linux/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
-#include <mach/bitfield.h>
-
-#include <asm/hardware/it8152.h>
#include "generic.h"
-#include "cm-x270-pci.h"
-
-/* virtual addresses for statically mapped regions */
-#define CMX270_VIRT_BASE (0xe8000000)
-#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
+/* physical address if local-bus attached devices */
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
/* GPIO IRQ usage */
-#define GPIO10_ETHIRQ (10)
-#define GPIO22_IT8152_IRQ (22)
#define GPIO83_MMC_IRQ (83)
-#define GPIO95_GFXIRQ (95)
-#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
-#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
-#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
@@ -157,62 +133,6 @@ static unsigned long cmx270_pin_config[] = {
GPIO83_GPIO, /* MMC card detect */
};
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx270_dm9000_resource[] = {
- [0] = {
- .start = DM9000_PHYS_BASE,
- .end = DM9000_PHYS_BASE + 4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DM9000_PHYS_BASE + 8,
- .end = DM9000_PHYS_BASE + 8 + 500,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = CMX270_ETHIRQ,
- .end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device cmx270_dm9000_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
- .resource = cmx270_dm9000_resource,
- .dev = {
- .platform_data = &cmx270_dm9000_platdata,
- }
-};
-
-static void __init cmx270_init_dm9000(void)
-{
- platform_device_register(&cmx270_dm9000_device);
-}
-#else
-static inline void cmx270_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx270_ts_device = {
- .name = "ucb1400_ts",
- .id = -1,
-};
-
-static void __init cmx270_init_touchscreen(void)
-{
- platform_device_register(&cmx270_ts_device);
-}
-#else
-static inline void cmx270_init_touchscreen(void) {}
-#endif
-
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
@@ -242,45 +162,7 @@ static void __init cmx270_init_rtc(void)
platform_device_register(&cmx270_rtc_device);
}
#else
-static inline void cmx270_init_rtc(void) {}
-#endif
-
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx270_leds[] = {
- [0] = {
- .name = "cm-x270:red",
- .default_trigger = "nand-disk",
- .gpio = 93,
- .active_low = 1,
- },
- [1] = {
- .name = "cm-x270:green",
- .default_trigger = "heartbeat",
- .gpio = 94,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
- .num_leds = ARRAY_SIZE(cmx270_leds),
- .leds = cmx270_leds,
-};
-
-static struct platform_device cmx270_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &cmx270_gpio_led_pdata,
- },
-};
-
-static void __init cmx270_init_leds(void)
-{
- platform_device_register(&cmx270_led_device);
-}
-#else
-static inline void cmx270_init_leds(void) {}
+static inline void cmx2xx_init_rtc(void) {}
#endif
/* 2700G graphics */
@@ -373,238 +255,11 @@ static void __init cmx270_init_2700G(void)
static inline void cmx270_init_2700G(void) {}
#endif
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
- Display definitions
- keep these for backwards compatibility, although symbolic names (as
- e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240 0
-#define MTYPE_TFT640x480 1
-#define MTYPE_CRT640x480 2
-#define MTYPE_CRT800x600 3
-#define MTYPE_TFT320x240 6
-#define MTYPE_STN640x480 7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
- .pixclock = 76923,
- .bpp = 8,
- .xres = 320,
- .yres = 240,
- .hsync_len = 3,
- .vsync_len = 2,
- .left_margin = 3,
- .upper_margin = 0,
- .right_margin = 3,
- .lower_margin = 0,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
- .modes = &generic_stn_320x240_mode,
- .num_modes = 1,
- .lccr0 = 0,
- .lccr3 = (LCCR3_PixClkDiv(0x03) |
- LCCR3_Acb(0xff) |
- LCCR3_PCP),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
- .pixclock = 38461,
- .bpp = 8,
- .xres = 640,
- .yres = 480,
- .hsync_len = 60,
- .vsync_len = 2,
- .left_margin = 70,
- .upper_margin = 10,
- .right_margin = 70,
- .lower_margin = 5,
- .sync = 0,
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
- .modes = &generic_tft_640x480_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x01) |
- LCCR3_Acb(0xff) |
- LCCR3_PCP),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
- .pixclock = 38461,
- .bpp = 8,
- .xres = 640,
- .yres = 480,
- .hsync_len = 63,
- .vsync_len = 2,
- .left_margin = 81,
- .upper_margin = 33,
- .right_margin = 16,
- .lower_margin = 10,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
- .modes = &generic_crt_640x480_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x01) |
- LCCR3_Acb(0xff)),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
- .pixclock = 28846,
- .bpp = 8,
- .xres = 800,
- .yres = 600,
- .hsync_len = 63,
- .vsync_len = 2,
- .left_margin = 26,
- .upper_margin = 21,
- .right_margin = 26,
- .lower_margin = 11,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
- .modes = &generic_crt_800x600_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x02) |
- LCCR3_Acb(0xff)),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
- .pixclock = 134615,
- .bpp = 16,
- .xres = 320,
- .yres = 240,
- .hsync_len = 63,
- .vsync_len = 7,
- .left_margin = 75,
- .upper_margin = 0,
- .right_margin = 15,
- .lower_margin = 15,
- .sync = 0,
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
- .modes = &generic_tft_320x240_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x06) |
- LCCR3_Acb(0xff) |
- LCCR3_PCP),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
- .pixclock = 57692,
- .bpp = 8,
- .xres = 640,
- .yres = 480,
- .hsync_len = 4,
- .vsync_len = 2,
- .left_margin = 10,
- .upper_margin = 5,
- .right_margin = 10,
- .lower_margin = 5,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
- .modes = &generic_stn_640x480_mode,
- .num_modes = 1,
- .lccr0 = 0,
- .lccr3 = (LCCR3_PixClkDiv(0x02) |
- LCCR3_Acb(0xff)),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-
-static int __init cmx270_set_display(char *str)
-{
- int disp_type = simple_strtol(str, NULL, 0);
- switch (disp_type) {
- case MTYPE_STN320x240:
- cmx270_display = &generic_stn_320x240;
- break;
- case MTYPE_TFT640x480:
- cmx270_display = &generic_tft_640x480;
- break;
- case MTYPE_CRT640x480:
- cmx270_display = &generic_crt_640x480;
- break;
- case MTYPE_CRT800x600:
- cmx270_display = &generic_crt_800x600;
- break;
- case MTYPE_TFT320x240:
- cmx270_display = &generic_tft_320x240;
- break;
- case MTYPE_STN640x480:
- cmx270_display = &generic_stn_640x480;
- break;
- default: /* fallback to CRT 640x480 */
- cmx270_display = &generic_crt_640x480;
- break;
- }
- return 1;
-}
-
-/*
- This should be done really early to get proper configuration for
- frame buffer.
- Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
- has limitied line length for kernel command line, and also it will
- break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx270_set_display);
-
-static void __init cmx270_init_display(void)
-{
- set_pxa_fb_info(cmx270_display);
-}
-#else
-static inline void cmx270_init_display(void) {}
-#endif
-
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cmx270_ohci_init(struct device *dev)
-{
- /* Set the Power Control Polarity Low */
- UHCHR = (UHCHR | UHCHR_PCPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = cmx270_ohci_init,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
};
static void __init cmx270_init_ohci(void)
@@ -676,131 +331,12 @@ static void __init cmx270_init_mmc(void)
static inline void cmx270_init_mmc(void) {}
#endif
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-{
- cmx270_pci_suspend();
-
- /* save MSC registers */
- sleep_save_msc[0] = MSC0;
- sleep_save_msc[1] = MSC1;
- sleep_save_msc[2] = MSC2;
-
- /* setup power saving mode registers */
- PCFR = 0x0;
- PSLR = 0xff400000;
- PMCR = 0x00000005;
- PWER = 0x80000000;
- PFER = 0x00000000;
- PRER = 0x00000000;
- PGSR0 = 0xC0018800;
- PGSR1 = 0x004F0002;
- PGSR2 = 0x6021C000;
- PGSR3 = 0x00020000;
-
- return 0;
-}
-
-static int cmx270_resume(struct sys_device *dev)
-{
- cmx270_pci_resume();
-
- /* restore MSC registers */
- MSC0 = sleep_save_msc[0];
- MSC1 = sleep_save_msc[1];
- MSC2 = sleep_save_msc[2];
-
- return 0;
-}
-
-static struct sysdev_class cmx270_pm_sysclass = {
- .name = "pm",
- .resume = cmx270_resume,
- .suspend = cmx270_suspend,
-};
-
-static struct sys_device cmx270_pm_device = {
- .cls = &cmx270_pm_sysclass,
-};
-
-static int __init cmx270_pm_init(void)
-{
- int error;
- error = sysdev_class_register(&cmx270_pm_sysclass);
- if (error == 0)
- error = sysdev_register(&cmx270_pm_device);
- return error;
-}
-#else
-static int __init cmx270_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx270_init_ac97(void)
-{
- pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx270_init_ac97(void) {}
-#endif
-
-static void __init cmx270_init(void)
+void __init cmx270_init(void)
{
- cmx270_pm_init();
-
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
- cmx270_init_dm9000();
cmx270_init_rtc();
- cmx270_init_display();
cmx270_init_mmc();
cmx270_init_ohci();
- cmx270_init_ac97();
- cmx270_init_touchscreen();
- cmx270_init_leds();
cmx270_init_2700G();
}
-
-static void __init cmx270_init_irq(void)
-{
- pxa27x_init_irq();
-
- cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
- [0] = { /* PCI bridge */
- .virtual = CMX270_IT8152_VIRT,
- .pfn = __phys_to_pfn(PXA_CS4_PHYS),
- .length = SZ_64M,
- .type = MT_DEVICE
- },
-};
-
-static void __init cmx270_map_io(void)
-{
- pxa_map_io();
- iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-
- it8152_base_address = CMX270_IT8152_VIRT;
-}
-#else
-static void __init cmx270_map_io(void)
-{
- pxa_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-x270")
- .boot_params = 0xa0000100,
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .map_io = cmx270_map_io,
- .init_irq = cmx270_init_irq,
- .timer = &pxa_timer,
- .init_machine = cmx270_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 2d5bcea1e52..3156b25f6e9 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
*
* PCI bios-type initialisation for PCI machines
*
@@ -28,7 +28,7 @@
#include <asm/hardware/it8152.h>
unsigned long it8152_base_address;
-static int cmx270_it8152_irq_gpio;
+static int cmx2xx_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
@@ -36,13 +36,13 @@ static int cmx270_it8152_irq_gpio;
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
-void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
- pr_info("Adjusting zones for CM-X270\n");
+ pr_info("Adjusting zones for CM-X2XX\n");
/*
* Only adjust if > 64M on current system
@@ -57,29 +57,29 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
}
}
-static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
- GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
+ GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
-void __cmx270_pci_init_irq(int irq_gpio)
+void __cmx2xx_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
- cmx270_it8152_irq_gpio = irq_gpio;
+ cmx2xx_it8152_irq_gpio = irq_gpio;
set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
- set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
+ set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
}
#ifdef CONFIG_PM
static unsigned long sleep_save_ite[10];
-void __cmx270_pci_suspend(void)
+void __cmx2xx_pci_suspend(void)
{
/* save ITE state */
sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
@@ -91,7 +91,7 @@ void __cmx270_pci_suspend(void)
__raw_writel((0), IT8152_INTC_LPCNIRR);
}
-void __cmx270_pci_resume(void)
+void __cmx2xx_pci_resume(void)
{
/* restore IT8152 state */
__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
@@ -99,12 +99,12 @@ void __cmx270_pci_resume(void)
__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
}
#else
-void cmx270_pci_suspend(void) {}
-void cmx270_pci_resume(void) {}
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
#endif
/* PCI IRQ mapping*/
-static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
@@ -116,14 +116,14 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
- but defining a platform for each possible base of CM-X270 is
- unrealistic. Here we keep mapping for ATXBase and SB-X270.
+ but defining a platform for each possible base of CM-X2XX is
+ unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
*/
/* ATXBASE PCI slot */
if (slot == 7)
return IT8152_PCI_INTA;
- /* ATXBase/SB-x270 CardBus */
+ /* ATXBase/SB-X2XX CardBus */
if (slot == 8 || slot == 0)
return IT8152_PCI_INTB;
@@ -131,7 +131,11 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (slot == 9)
return IT8152_PCI_INTA;
- /* SB-x270 Ethernet */
+ /* CM-x255 Onboard Ethernet */
+ if (slot == 15)
+ return IT8152_PCI_INTC;
+
+ /* SB-x2xx Ethernet */
if (slot == 16)
return IT8152_PCI_INTA;
@@ -144,9 +148,9 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
return(0);
}
-static void cmx270_pci_preinit(void)
+static void cmx2xx_pci_preinit(void)
{
- pr_info("Initializing CM-X270 PCI subsystem\n");
+ pr_info("Initializing CM-X2XX PCI subsystem\n");
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
@@ -200,21 +204,21 @@ static void cmx270_pci_preinit(void)
}
}
-static struct hw_pci cmx270_pci __initdata = {
+static struct hw_pci cmx2xx_pci __initdata = {
.swizzle = pci_std_swizzle,
- .map_irq = cmx270_pci_map_irq,
+ .map_irq = cmx2xx_pci_map_irq,
.nr_controllers = 1,
.setup = it8152_pci_setup,
.scan = it8152_pci_scan_bus,
- .preinit = cmx270_pci_preinit,
+ .preinit = cmx2xx_pci_preinit,
};
-static int __init cmx270_init_pci(void)
+static int __init cmx2xx_init_pci(void)
{
if (machine_is_armcore())
- pci_common_init(&cmx270_pci);
+ pci_common_init(&cmx2xx_pci);
return 0;
}
-subsys_initcall(cmx270_init_pci);
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
new file mode 100644
index 00000000000..e24aad2e3ad
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -0,0 +1,13 @@
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
new file mode 100644
index 00000000000..0b3ce3b6d89
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -0,0 +1,531 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
+ *
+ * Copyright (C) 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x2xx-pci.h"
+
+extern void cmx255_init(void);
+extern void cmx270_init(void);
+
+/* virtual addresses for statically mapped regions */
+#define CMX2XX_VIRT_BASE (0xe8000000)
+#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
+
+/* physical address if local-bus attached devices */
+#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
+#define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX255_GPIO_RED (27)
+#define CMX255_GPIO_GREEN (32)
+#define CMX270_GPIO_RED (93)
+#define CMX270_GPIO_GREEN (94)
+
+/* GPIO IRQ usage */
+#define GPIO22_ETHIRQ (22)
+#define GPIO10_ETHIRQ (10)
+#define CMX255_GPIO_IT8152_IRQ (0)
+#define CMX270_GPIO_IT8152_IRQ (22)
+
+#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx255_dm9000_resource[] = {
+ [0] = {
+ .start = CMX255_DM9000_PHYS_BASE,
+ .end = CMX255_DM9000_PHYS_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CMX255_DM9000_PHYS_BASE + 4,
+ .end = CMX255_DM9000_PHYS_BASE + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = CMX255_ETHIRQ,
+ .end = CMX255_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct resource cmx270_dm9000_resource[] = {
+ [0] = {
+ .start = CMX270_DM9000_PHYS_BASE,
+ .end = CMX270_DM9000_PHYS_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CMX270_DM9000_PHYS_BASE + 8,
+ .end = CMX270_DM9000_PHYS_BASE + 8 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = CMX270_ETHIRQ,
+ .end = CMX270_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device cmx2xx_dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
+ .dev = {
+ .platform_data = &cmx270_dm9000_platdata,
+ }
+};
+
+static void __init cmx2xx_init_dm9000(void)
+{
+ if (cpu_is_pxa25x())
+ cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
+ else
+ cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
+ platform_device_register(&cmx2xx_dm9000_device);
+}
+#else
+static inline void cmx2xx_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device cmx2xx_ts_device = {
+ .name = "ucb1400_ts",
+ .id = -1,
+};
+
+static void __init cmx2xx_init_touchscreen(void)
+{
+ platform_device_register(&cmx2xx_ts_device);
+}
+#else
+static inline void cmx2xx_init_touchscreen(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx2xx_leds[] = {
+ [0] = {
+ .name = "cm-x2xx:red",
+ .default_trigger = "nand-disk",
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "cm-x2xx:green",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cmx2xx_leds),
+ .leds = cmx2xx_leds,
+};
+
+static struct platform_device cmx2xx_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx2xx_gpio_led_pdata,
+ },
+};
+
+static void __init cmx2xx_init_leds(void)
+{
+ if (cpu_is_pxa25x()) {
+ cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
+ cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
+ } else {
+ cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+ cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+ }
+ platform_device_register(&cmx2xx_led_device);
+}
+#else
+static inline void cmx2xx_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+/*
+ Display definitions
+ keep these for backwards compatibility, although symbolic names (as
+ e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240 0
+#define MTYPE_TFT640x480 1
+#define MTYPE_CRT640x480 2
+#define MTYPE_CRT800x600 3
+#define MTYPE_TFT320x240 6
+#define MTYPE_STN640x480 7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+ .pixclock = 76923,
+ .bpp = 8,
+ .xres = 320,
+ .yres = 240,
+ .hsync_len = 3,
+ .vsync_len = 2,
+ .left_margin = 3,
+ .upper_margin = 0,
+ .right_margin = 3,
+ .lower_margin = 0,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+ .modes = &generic_stn_320x240_mode,
+ .num_modes = 1,
+ .lccr0 = 0,
+ .lccr3 = (LCCR3_PixClkDiv(0x03) |
+ LCCR3_Acb(0xff) |
+ LCCR3_PCP),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+ .pixclock = 38461,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 60,
+ .vsync_len = 2,
+ .left_margin = 70,
+ .upper_margin = 10,
+ .right_margin = 70,
+ .lower_margin = 5,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+ .modes = &generic_tft_640x480_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x01) |
+ LCCR3_Acb(0xff) |
+ LCCR3_PCP),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+ .pixclock = 38461,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 63,
+ .vsync_len = 2,
+ .left_margin = 81,
+ .upper_margin = 33,
+ .right_margin = 16,
+ .lower_margin = 10,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+ .modes = &generic_crt_640x480_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x01) |
+ LCCR3_Acb(0xff)),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+ .pixclock = 28846,
+ .bpp = 8,
+ .xres = 800,
+ .yres = 600,
+ .hsync_len = 63,
+ .vsync_len = 2,
+ .left_margin = 26,
+ .upper_margin = 21,
+ .right_margin = 26,
+ .lower_margin = 11,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+ .modes = &generic_crt_800x600_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x02) |
+ LCCR3_Acb(0xff)),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+ .pixclock = 134615,
+ .bpp = 16,
+ .xres = 320,
+ .yres = 240,
+ .hsync_len = 63,
+ .vsync_len = 7,
+ .left_margin = 75,
+ .upper_margin = 0,
+ .right_margin = 15,
+ .lower_margin = 15,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+ .modes = &generic_tft_320x240_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x06) |
+ LCCR3_Acb(0xff) |
+ LCCR3_PCP),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+ .pixclock = 57692,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 10,
+ .upper_margin = 5,
+ .right_margin = 10,
+ .lower_margin = 5,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+ .modes = &generic_stn_640x480_mode,
+ .num_modes = 1,
+ .lccr0 = 0,
+ .lccr3 = (LCCR3_PixClkDiv(0x02) |
+ LCCR3_Acb(0xff)),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
+
+static int __init cmx2xx_set_display(char *str)
+{
+ int disp_type = simple_strtol(str, NULL, 0);
+ switch (disp_type) {
+ case MTYPE_STN320x240:
+ cmx2xx_display = &generic_stn_320x240;
+ break;
+ case MTYPE_TFT640x480:
+ cmx2xx_display = &generic_tft_640x480;
+ break;
+ case MTYPE_CRT640x480:
+ cmx2xx_display = &generic_crt_640x480;
+ break;
+ case MTYPE_CRT800x600:
+ cmx2xx_display = &generic_crt_800x600;
+ break;
+ case MTYPE_TFT320x240:
+ cmx2xx_display = &generic_tft_320x240;
+ break;
+ case MTYPE_STN640x480:
+ cmx2xx_display = &generic_stn_640x480;
+ break;
+ default: /* fallback to CRT 640x480 */
+ cmx2xx_display = &generic_crt_640x480;
+ break;
+ }
+ return 1;
+}
+
+/*
+ This should be done really early to get proper configuration for
+ frame buffer.
+ Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
+ has limitied line length for kernel command line, and also it will
+ break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx2xx_set_display);
+
+static void __init cmx2xx_init_display(void)
+{
+ set_pxa_fb_info(cmx2xx_display);
+}
+#else
+static inline void cmx2xx_init_display(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+{
+ cmx2xx_pci_suspend();
+
+ /* save MSC registers */
+ sleep_save_msc[0] = MSC0;
+ sleep_save_msc[1] = MSC1;
+ sleep_save_msc[2] = MSC2;
+
+ /* setup power saving mode registers */
+ PCFR = 0x0;
+ PSLR = 0xff400000;
+ PMCR = 0x00000005;
+ PWER = 0x80000000;
+ PFER = 0x00000000;
+ PRER = 0x00000000;
+ PGSR0 = 0xC0018800;
+ PGSR1 = 0x004F0002;
+ PGSR2 = 0x6021C000;
+ PGSR3 = 0x00020000;
+
+ return 0;
+}
+
+static int cmx2xx_resume(struct sys_device *dev)
+{
+ cmx2xx_pci_resume();
+
+ /* restore MSC registers */
+ MSC0 = sleep_save_msc[0];
+ MSC1 = sleep_save_msc[1];
+ MSC2 = sleep_save_msc[2];
+
+ return 0;
+}
+
+static struct sysdev_class cmx2xx_pm_sysclass = {
+ .name = "pm",
+ .resume = cmx2xx_resume,
+ .suspend = cmx2xx_suspend,
+};
+
+static struct sys_device cmx2xx_pm_device = {
+ .cls = &cmx2xx_pm_sysclass,
+};
+
+static int __init cmx2xx_pm_init(void)
+{
+ int error;
+ error = sysdev_class_register(&cmx2xx_pm_sysclass);
+ if (error == 0)
+ error = sysdev_register(&cmx2xx_pm_device);
+ return error;
+}
+#else
+static int __init cmx2xx_pm_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx2xx_init_ac97(void)
+{
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx2xx_init_ac97(void) {}
+#endif
+
+static void __init cmx2xx_init(void)
+{
+ cmx2xx_pm_init();
+
+ if (cpu_is_pxa25x())
+ cmx255_init();
+ else
+ cmx270_init();
+
+ cmx2xx_init_dm9000();
+ cmx2xx_init_display();
+ cmx2xx_init_ac97();
+ cmx2xx_init_touchscreen();
+ cmx2xx_init_leds();
+}
+
+static void __init cmx2xx_init_irq(void)
+{
+ pxa27x_init_irq();
+
+ if (cpu_is_pxa25x()) {
+ pxa25x_init_irq();
+ cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
+ } else {
+ pxa27x_init_irq();
+ cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
+ }
+}
+
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx2xx_io_desc[] __initdata = {
+ [0] = { /* PCI bridge */
+ .virtual = CMX2XX_IT8152_VIRT,
+ .pfn = __phys_to_pfn(PXA_CS4_PHYS),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init cmx2xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
+
+ it8152_base_address = CMX2XX_IT8152_VIRT;
+}
+#else
+static void __init cmx2xx_map_io(void)
+{
+ pxa_map_io();
+}
+#endif
+
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = cmx2xx_map_io,
+ .init_irq = cmx2xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = cmx2xx_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
new file mode 100644
index 00000000000..deb46cd144b
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa300.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+#include <mach/pxa3xx_nand.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+
+#define CM_X300_ETH_PHYS 0x08000010
+
+#define GPIO82_MMC2_IRQ (82)
+#define GPIO85_MMC2_WP (85)
+
+#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+
+static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+
+ /* BTUART */
+ GPIO111_UART2_RTS,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+ GPIO113_UART2_TXD,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+ /* STUART */
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+ /* AC97 */
+ GPIO23_AC97_nACRESET,
+ GPIO24_AC97_SYSCLK,
+ GPIO29_AC97_BITCLK,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+
+ /* Keypad */
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO4_2_KP_MKOUT_5,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+
+ /* MMC2 */
+ GPIO9_MMC2_DAT0,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO11_MMC2_DAT2,
+ GPIO12_MMC2_DAT3,
+ GPIO13_MMC2_CLK,
+ GPIO14_MMC2_CMD,
+
+ /* FFUART */
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+ GPIO31_UART1_TXD,
+ GPIO32_UART1_CTS,
+ GPIO37_UART1_RTS,
+ GPIO33_UART1_DCD,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+ GPIO35_UART1_RI,
+ GPIO36_UART1_DTR,
+
+ /* GPIOs */
+ GPIO79_GPIO, /* LED */
+ GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
+ GPIO85_GPIO, /* MMC WP */
+ GPIO99_GPIO, /* Ethernet IRQ */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = CM_X300_ETH_PHYS,
+ .end = CM_X300_ETH_PHYS + 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CM_X300_ETH_PHYS + 0x4,
+ .end = CM_X300_ETH_PHYS + 0x4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+ .dev = {
+ .platform_data = &cm_x300_dm9000_platdata,
+ }
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+ platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38000,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 0,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .cmap_greyscale = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .cmap_greyscale = 0,
+ },
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+ .modes = cm_x300_lcd_modes,
+ .num_modes = 2,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+ set_pxa_fb_info(&cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+ [0] = {
+ .name = "OBM",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ },
+ [3] = {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K + SZ_1M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [4] = {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ [5] = {
+ .name = "fs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+ .enable_arbiter = 1,
+ .parts = cm_x300_nand_partitions,
+ .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+ pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+ no detection/ro pins */
+static int cm_x300_mci_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
+{
+ return 0;
+}
+
+static void cm_x300_mci_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci_init,
+ .exit = cm_x300_mci_exit,
+};
+
+static int cm_x300_mci2_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO85_MMC2_WP);
+}
+
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
+{
+ int err;
+
+ /*
+ * setup GPIO for CM-X300 MMC controller
+ */
+ err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(GPIO82_MMC2_IRQ);
+
+ err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(GPIO85_MMC2_WP);
+
+ err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+err_request_irq:
+ gpio_free(GPIO85_MMC2_WP);
+err_request_wp:
+ gpio_free(GPIO82_MMC2_IRQ);
+err_request_cd:
+ return err;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+ free_irq(CM_X300_MMC2_IRQ, data);
+ gpio_free(GPIO82_MMC2_IRQ);
+ gpio_free(GPIO85_MMC2_WP);
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
+ .get_ro = cm_x300_mci2_ro,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+ pxa_set_mci_info(&cm_x300_mci_platform_data);
+ pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+ pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+ [0] = {
+ .name = "cm-x300:green",
+ .default_trigger = "heartbeat",
+ .gpio = 79,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cm_x300_leds),
+ .leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_x300_gpio_led_pdata,
+ },
+};
+
+static void __init cm_x300_init_leds(void)
+{
+ platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+ .gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+ .gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+ [0] = {
+ I2C_BOARD_INFO("pca9555", 0x24),
+ .platform_data = &cm_x300_gpio_ext_pdata_0,
+ },
+ [1] = {
+ I2C_BOARD_INFO("pca9555", 0x25),
+ .platform_data = &cm_x300_gpio_ext_pdata_1,
+ },
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, cm_x300_gpio_ext_info,
+ ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+static void __init cm_x300_init(void)
+{
+ /* board-processor specific GPIO initialization */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+
+ cm_x300_init_dm9000();
+ cm_x300_init_lcd();
+ cm_x300_init_ohci();
+ cm_x300_init_mmc();
+ cm_x300_init_nand();
+ cm_x300_init_leds();
+ cm_x300_init_i2c();
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = cm_x300_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index abce13c846c..e8473624427 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -29,12 +29,17 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/colibri.h>
#include "generic.h"
#include "devices.h"
+static unsigned long colibri_pin_config[] __initdata = {
+ GPIO78_nCS_2, /* Ethernet CS */
+ GPIO114_GPIO, /* Ethernet IRQ */
+};
+
/*
* Flash
*/
@@ -116,9 +121,7 @@ static struct platform_device *colibri_devices[] __initdata = {
static void __init colibri_init(void)
{
- /* DM9000 LAN */
- pxa_gpio_mode(GPIO78_nCS_2_MD);
- pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
}
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index e703a8d209e..65558d6aa22 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -20,7 +20,12 @@
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>
+#include <linux/gpio.h>
#include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
#include <video/w100fb.h>
#include <asm/setup.h>
@@ -28,7 +33,6 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
@@ -37,11 +41,12 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
#include <mach/sharpsl.h>
@@ -52,6 +57,61 @@
#include "devices.h"
#include "sharpsl.h"
+static unsigned long corgi_pin_config[] __initdata = {
+ /* Static Memory I/O */
+ GPIO78_nCS_2, /* w100fb */
+ GPIO80_nCS_4, /* scoop */
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+
+ /* Infra-Red */
+ GPIO47_FICP_TXD,
+ GPIO46_FICP_RXD,
+
+ /* FFUART */
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+ GPIO39_FFUART_TXD,
+ GPIO37_FFUART_DSR,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* GPIO */
+ GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
+ GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
+ GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
+ GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
/*
* Corgi SCOOP Device
@@ -67,6 +127,7 @@ static struct resource corgi_scoop_resources[] = {
static struct scoop_config corgi_scoop_setup = {
.io_dir = CORGI_SCOOP_IO_DIR,
.io_out = CORGI_SCOOP_IO_OUT,
+ .gpio_base = CORGI_SCOOP_GPIO_BASE,
};
struct platform_device corgiscoop_device = {
@@ -79,27 +140,6 @@ struct platform_device corgiscoop_device = {
.resource = corgi_scoop_resources,
};
-static void corgi_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
@@ -112,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
static struct scoop_pcmcia_config corgi_pcmcia_config = {
.devs = &corgi_pcmcia_scoop[0],
.num_devs = 1,
- .pcmcia_init = corgi_pcmcia_init,
};
EXPORT_SYMBOL(corgiscoop_device);
-
-/*
- * Corgi SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
- */
-struct platform_device corgissp_device = {
- .name = "corgi-ssp",
- .dev = {
- .parent = &corgiscoop_device.dev,
- },
- .id = -1,
-};
-
-struct corgissp_machinfo corgi_ssp_machinfo = {
- .port = 1,
- .cs_lcdcon = CORGI_GPIO_LCDCON_CS,
- .cs_ads7846 = CORGI_GPIO_ADS7846_CS,
- .cs_max1111 = CORGI_GPIO_MAX1111_CS,
- .clk_lcdcon = 76,
- .clk_ads7846 = 2,
- .clk_max1111 = 8,
-};
-
-
-/*
- * LCD/Framebuffer
- */
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
- corgi_lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
- corgi_lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
- .change = w100_lcdtg_init,
- .suspend = w100_lcdtg_suspend,
- .resume = w100_lcdtg_init,
-};
-
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
@@ -242,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = {
};
static struct w100fb_mach_info corgi_fb_info = {
- .tg = &corgi_lcdtg_info,
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
@@ -268,60 +259,10 @@ static struct platform_device corgifb_device = {
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
- .parent = &corgissp_device.dev,
},
};
-
-/*
- * Corgi Backlight Device
- */
-static void corgi_bl_kick_battery(void)
-{
- void (*kick_batt)(void);
-
- kick_batt = symbol_get(sharpsl_battery_kick);
- if (kick_batt) {
- kick_batt();
- symbol_put(sharpsl_battery_kick);
- }
-}
-
-static void corgi_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-
-static struct generic_bl_info corgi_bl_machinfo = {
- .name = "corgi-bl",
- .max_intensity = 0x2f,
- .default_intensity = 0x1f,
- .limit_mask = 0x0b,
- .set_bl_intensity = corgi_bl_set_intensity,
- .kick_battery = corgi_bl_kick_battery,
-};
-
-static struct platform_device corgibl_device = {
- .name = "generic-bl",
- .dev = {
- .parent = &corgifb_device.dev,
- .platform_data = &corgi_bl_machinfo,
- },
- .id = -1,
-};
-
-
/*
* Corgi Keyboard Device
*/
@@ -330,75 +271,35 @@ static struct platform_device corgikbd_device = {
.id = -1,
};
-
/*
* Corgi LEDs
*/
-static struct platform_device corgiled_device = {
- .name = "corgi-led",
- .id = -1,
-};
-
-
-/*
- * Corgi Touch Screen Device
- */
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
- while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
- while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-static unsigned long corgi_get_hsync_invperiod(void)
-{
- if (!get_hsync_invperiod)
- get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
- if (!get_hsync_invperiod)
- return 0;
-
- return get_hsync_invperiod(&corgifb_device.dev);
-}
-
-static void corgi_put_hsync(void)
-{
- if (get_hsync_invperiod)
- symbol_put(w100fb_get_hsynclen);
- get_hsync_invperiod = NULL;
-}
-
-static void corgi_wait_hsync(void)
-{
- sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-
-static struct resource corgits_resources[] = {
- [0] = {
- .start = CORGI_IRQ_GPIO_TP_INT,
- .end = CORGI_IRQ_GPIO_TP_INT,
- .flags = IORESOURCE_IRQ,
+static struct gpio_led corgi_gpio_leds[] = {
+ {
+ .name = "corgi:amber:charge",
+ .default_trigger = "sharpsl-charge",
+ .gpio = CORGI_GPIO_LED_ORANGE,
+ },
+ {
+ .name = "corgi:green:mail",
+ .default_trigger = "nand-disk",
+ .gpio = CORGI_GPIO_LED_GREEN,
},
};
-static struct corgits_machinfo corgi_ts_machinfo = {
- .get_hsync_invperiod = corgi_get_hsync_invperiod,
- .put_hsync = corgi_put_hsync,
- .wait_hsync = corgi_wait_hsync,
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+ .leds = corgi_gpio_leds,
+ .num_leds = ARRAY_SIZE(corgi_gpio_leds),
};
-static struct platform_device corgits_device = {
- .name = "corgi-ts",
+static struct platform_device corgiled_device = {
+ .name = "leds-gpio",
+ .id = -1,
.dev = {
- .parent = &corgissp_device.dev,
- .platform_data = &corgi_ts_machinfo,
+ .platform_data = &corgi_gpio_leds_info,
},
- .id = -1,
- .num_resources = ARRAY_SIZE(corgits_resources),
- .resource = corgits_resources,
};
-
/*
* MMC/SD Device
*
@@ -411,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
{
int err;
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
- pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
- pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+ err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
+ if (err)
+ goto err_out;
- corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+ err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
+ if (err)
+ goto err_free_1;
- err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
+ err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
if (err)
- printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ goto err_free_2;
+ gpio_direction_input(CORGI_GPIO_nSD_DETECT);
+ gpio_direction_input(CORGI_GPIO_nSD_WP);
+ gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
+
+ corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+ err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+ __func__);
+ goto err_free_3;
+ }
+ return 0;
+
+err_free_3:
+ gpio_free(CORGI_GPIO_SD_PWR);
+err_free_2:
+ gpio_free(CORGI_GPIO_nSD_WP);
+err_free_1:
+ gpio_free(CORGI_GPIO_nSD_DETECT);
+err_out:
return err;
}
@@ -432,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask)
- GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
- else
- GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+ gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
}
static int corgi_mci_get_ro(struct device *dev)
{
- return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+ return gpio_get_value(CORGI_GPIO_nSD_WP);
}
static void corgi_mci_exit(struct device *dev, void *data)
{
free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(CORGI_GPIO_SD_PWR);
+ gpio_free(CORGI_GPIO_nSD_WP);
+ gpio_free(CORGI_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data corgi_mci_platform_data = {
@@ -462,16 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
*/
static void corgi_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF)
- GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
- else
- GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+ gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
+static int corgi_irda_startup(struct device *dev)
+{
+ int err;
+
+ err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
+ if (err)
+ return err;
+
+ gpio_direction_output(CORGI_GPIO_IR_ON, 1);
+ return 0;
+}
+
+static void corgi_irda_shutdown(struct device *dev)
+{
+ gpio_free(CORGI_GPIO_IR_ON);
+}
+
static struct pxaficp_platform_data corgi_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = corgi_irda_transceiver_mode,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = corgi_irda_transceiver_mode,
+ .startup = corgi_irda_startup,
+ .shutdown = corgi_irda_shutdown,
};
@@ -483,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+ .num_chipselect = 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+ .cs_control = corgi_ads7846_cs,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT,
+ .gpio_backlight_on = -1,
+ .kick_battery = corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+ .cs_control = corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+ .cs_control = corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &corgi_ads7846_info,
+ .controller_data= &corgi_ads7846_chip,
+ .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 1,
+ .chip_select = 1,
+ .platform_data = &corgi_lcdcon_info,
+ .controller_data= &corgi_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &corgi_max1111_chip,
+ },
+};
+
+static void __init corgi_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+ if (err)
+ goto err_free_2;
+
+ gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+ gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+ gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+ pxa2xx_set_spi_info(1, &corgi_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+ return;
+
+err_free_2:
+ gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+ gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
- &corgissp_device,
&corgifb_device,
&corgikbd_device,
- &corgibl_device,
- &corgits_device,
&corgiled_device,
};
@@ -498,7 +552,8 @@ static void corgi_poweroff(void)
{
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
arm_machine_restart('h');
}
@@ -506,7 +561,8 @@ static void corgi_restart(char mode)
{
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
arm_machine_restart('h');
}
@@ -515,20 +571,12 @@ static void __init corgi_init(void)
pm_power_off = corgi_poweroff;
arm_pm_restart = corgi_restart;
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x0158C000;
- PGSR1 = 0x00FF0080;
- PGSR2 = 0x0001C004;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
- corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
- pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
- pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+ corgi_init_spi();
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
deleted file mode 100644
index 311baf149b0..00000000000
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/corgi_lcd.c
- *
- * Corgi/Spitz LCD Specific Code
- *
- * Copyright (C) 2005 Richard Purdie
- *
- * Connectivity:
- * Corgi - LCD to ATI Imageon w100 (Wallaby)
- * Spitz - LCD to PXA Framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/akita.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/sharpsl.h>
-#include <mach/spitz.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include "generic.h"
-
-/* Register Addresses */
-#define RESCTL_ADRS 0x00
-#define PHACTRL_ADRS 0x01
-#define DUTYCTRL_ADRS 0x02
-#define POWERREG0_ADRS 0x03
-#define POWERREG1_ADRS 0x04
-#define GPOR3_ADRS 0x05
-#define PICTRL_ADRS 0x06
-#define POLCTRL_ADRS 0x07
-
-/* Register Bit Definitions */
-#define RESCTL_QVGA 0x01
-#define RESCTL_VGA 0x00
-
-#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
-#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
-#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
-#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
-#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
-#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
-#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE 0x01
-#define PICTRL_INIOFF 0x02
-#define PICTRL_POWER_DOWN 0x04
-#define PICTRL_COM_SIGNAL_OFF 0x08
-#define PICTRL_DAC_SIGNAL_OFF 0x10
-
-#define POLCTRL_SYNC_POL_FALL 0x01
-#define POLCTRL_EN_POL_FALL 0x02
-#define POLCTRL_DATA_POL_FALL 0x04
-#define POLCTRL_SYNC_ACT_H 0x08
-#define POLCTRL_EN_ACT_L 0x10
-
-#define POLCTRL_SYNC_POL_RISE 0x00
-#define POLCTRL_EN_POL_RISE 0x00
-#define POLCTRL_DATA_POL_RISE 0x00
-#define POLCTRL_SYNC_ACT_L 0x00
-#define POLCTRL_EN_ACT_H 0x00
-
-#define PHACTRL_PHASE_MANUAL 0x01
-#define DEFAULT_PHAD_QVGA (9)
-#define DEFAULT_COMADJ (125)
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
- udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
- lcdtg_ssp_i2c_send(data);
- lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
- lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
- lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
- lcdtg_ssp_i2c_send(base);
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
- int i;
- for (i = 0; i < 8; i++) {
- if (data & 0x80)
- lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
- else
- lcdtg_i2c_send_bit(base);
- data <<= 1;
- }
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
- lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
- /* Set Common Voltage to M62332FP via I2C */
- lcdtg_i2c_send_start(base_data);
- lcdtg_i2c_send_byte(base_data, 0x9c);
- lcdtg_i2c_wait_ack(base_data);
- lcdtg_i2c_send_byte(base_data, 0x00);
- lcdtg_i2c_wait_ack(base_data);
- lcdtg_i2c_send_byte(base_data, data);
- lcdtg_i2c_wait_ack(base_data);
- lcdtg_i2c_send_stop(base_data);
-}
-
-/* Set Phase Adjust */
-static void lcdtg_set_phadadj(int mode)
-{
- int adj;
- switch(mode) {
- case 480:
- case 640:
- /* Setting for VGA */
- adj = sharpsl_param.phadadj;
- if (adj < 0) {
- adj = PHACTRL_PHASE_MANUAL;
- } else {
- adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
- }
- break;
- case 240:
- case 320:
- default:
- /* Setting for QVGA */
- adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
- break;
- }
-
- corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
-}
-
-static int lcd_inited;
-
-void corgi_lcdtg_hw_init(int mode)
-{
- if (!lcd_inited) {
- int comadj;
-
- /* Initialize Internal Logic & Port */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
- | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
-
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
- | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
- /* VDD(+8V), SVSS(-4V) ON */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
- mdelay(3);
-
- /* DAC ON */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
- | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- /* INIB = H, INI = L */
- /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
-
- /* Set Common Voltage */
- comadj = sharpsl_param.comadj;
- if (comadj < 0)
- comadj = DEFAULT_COMADJ;
- lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-
- /* VCC5 ON, DAC ON */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
- POWER0_COM_OFF | POWER0_VCC5_ON);
-
- /* GVSS(-8V) ON, VDD ON */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
- mdelay(2);
-
- /* COM SIGNAL ON (PICTL[3] = L) */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
-
- /* COM ON, DAC ON, VCC5_ON */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
- | POWER0_COM_ON | POWER0_VCC5_ON);
-
- /* VW ON, GVSS ON, VDD ON */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
-
- /* Signals output enable */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
-
- /* Set Phase Adjust */
- lcdtg_set_phadadj(mode);
-
- /* Initialize for Input Signals from ATI */
- corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
- | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
- udelay(1000);
-
- lcd_inited=1;
- } else {
- lcdtg_set_phadadj(mode);
- }
-
- switch(mode) {
- case 480:
- case 640:
- /* Set Lcd Resolution (VGA) */
- corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
- break;
- case 240:
- case 320:
- default:
- /* Set Lcd Resolution (QVGA) */
- corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
- break;
- }
-}
-
-void corgi_lcdtg_suspend(void)
-{
- /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
- mdelay(34);
-
- /* (1)VW OFF */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
- /* (2)COM OFF */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
- /* (3)Set Common Voltage Bias 0V */
- lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
- /* (4)GVSS OFF */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
- /* (5)VCC5 OFF */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- /* (6)Set PDWN, INIOFF, DACOFF */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
- PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
- /* (7)DAC OFF */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- /* (8)VDD OFF */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
- lcd_inited = 0;
-}
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 35bbfccd2df..eb7d6c94aa4 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -21,7 +21,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
#include <mach/sharpsl.h>
#include <mach/corgi.h>
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
deleted file mode 100644
index 8e2f2215c4b..00000000000
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * SSP control code for Sharp Corgi devices
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/regs-ssp.h>
-#include "sharpsl.h"
-
-static DEFINE_SPINLOCK(corgi_ssp_lock);
-static struct ssp_dev corgi_ssp_dev;
-static struct ssp_state corgi_ssp_state;
-static struct corgissp_machinfo *ssp_machinfo;
-
-/*
- * There are three devices connected to the SSP interface:
- * 1. A touchscreen controller (TI ADS7846 compatible)
- * 2. An LCD controller (with some Backlight functionality)
- * 3. A battery monitoring IC (Maxim MAX1111)
- *
- * Each device uses a different speed/mode of communication.
- *
- * The touchscreen is very sensitive and the most frequently used
- * so the port is left configured for this.
- *
- * Devices are selected using Chip Selects on GPIOs.
- */
-
-/*
- * ADS7846 Routines
- */
-unsigned long corgi_ssp_ads7846_putget(ulong data)
-{
- unsigned long flag;
- u32 ret = 0;
-
- spin_lock_irqsave(&corgi_ssp_lock, flag);
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-
- ssp_write_word(&corgi_ssp_dev,data);
- ssp_read_word(&corgi_ssp_dev, &ret);
-
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
- spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
- return ret;
-}
-
-/*
- * NOTE: These functions should always be called in interrupt context
- * and use the _lock and _unlock functions. They are very time sensitive.
- */
-void corgi_ssp_ads7846_lock(void)
-{
- spin_lock(&corgi_ssp_lock);
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-}
-
-void corgi_ssp_ads7846_unlock(void)
-{
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
- spin_unlock(&corgi_ssp_lock);
-}
-
-void corgi_ssp_ads7846_put(ulong data)
-{
- ssp_write_word(&corgi_ssp_dev,data);
-}
-
-unsigned long corgi_ssp_ads7846_get(void)
-{
- u32 ret = 0;
- ssp_read_word(&corgi_ssp_dev, &ret);
- return ret;
-}
-
-EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
-EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_put);
-EXPORT_SYMBOL(corgi_ssp_ads7846_get);
-
-
-/*
- * LCD/Backlight Routines
- */
-unsigned long corgi_ssp_dac_put(ulong data)
-{
- unsigned long flag, sscr1 = SSCR1_SPH;
- u32 tmp;
-
- spin_lock_irqsave(&corgi_ssp_lock, flag);
-
- if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
- sscr1 = 0;
-
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
- ssp_enable(&corgi_ssp_dev);
-
- if (ssp_machinfo->cs_lcdcon >= 0)
- GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
- ssp_write_word(&corgi_ssp_dev,data);
- /* Read null data back from device to prevent SSP overflow */
- ssp_read_word(&corgi_ssp_dev, &tmp);
- if (ssp_machinfo->cs_lcdcon >= 0)
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
- ssp_enable(&corgi_ssp_dev);
-
- spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
- return 0;
-}
-
-void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
-{
- corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
-}
-
-void corgi_ssp_blduty_set(int duty)
-{
- corgi_ssp_lcdtg_send(0x02,duty);
-}
-
-EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
-EXPORT_SYMBOL(corgi_ssp_blduty_set);
-
-/*
- * Max1111 Routines
- */
-int corgi_ssp_max1111_get(ulong data)
-{
- unsigned long flag;
- long voltage = 0, voltage1 = 0, voltage2 = 0;
-
- spin_lock_irqsave(&corgi_ssp_lock, flag);
- if (ssp_machinfo->cs_max1111 >= 0)
- GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
- ssp_enable(&corgi_ssp_dev);
-
- udelay(1);
-
- /* TB1/RB1 */
- ssp_write_word(&corgi_ssp_dev,data);
- ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
-
- /* TB12/RB2 */
- ssp_write_word(&corgi_ssp_dev,0);
- ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
-
- /* TB13/RB3*/
- ssp_write_word(&corgi_ssp_dev,0);
- ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
-
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
- ssp_enable(&corgi_ssp_dev);
- if (ssp_machinfo->cs_max1111 >= 0)
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
- spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
- if (voltage1 & 0xc0 || voltage2 & 0x3f)
- voltage = -1;
- else
- voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
-
- return voltage;
-}
-
-EXPORT_SYMBOL(corgi_ssp_max1111_get);
-
-/*
- * Support Routines
- */
-
-void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
-{
- ssp_machinfo = machinfo;
-}
-
-static int __init corgi_ssp_probe(struct platform_device *dev)
-{
- int ret;
-
- /* Chip Select - Disable All */
- if (ssp_machinfo->cs_lcdcon >= 0)
- pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH);
- if (ssp_machinfo->cs_max1111 >= 0)
- pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
- if (ssp_machinfo->cs_ads7846 >= 0)
- pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
-
- ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
-
- if (ret)
- printk(KERN_ERR "Unable to register SSP handler!\n");
- else {
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
- ssp_enable(&corgi_ssp_dev);
- }
-
- return ret;
-}
-
-static int corgi_ssp_remove(struct platform_device *dev)
-{
- ssp_exit(&corgi_ssp_dev);
- return 0;
-}
-
-static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
-{
- ssp_flush(&corgi_ssp_dev);
- ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-
- return 0;
-}
-
-static int corgi_ssp_resume(struct platform_device *dev)
-{
- if (ssp_machinfo->cs_lcdcon >= 0)
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
- if (ssp_machinfo->cs_max1111 >= 0)
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
- ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
- ssp_enable(&corgi_ssp_dev);
-
- return 0;
-}
-
-static struct platform_driver corgissp_driver = {
- .probe = corgi_ssp_probe,
- .remove = corgi_ssp_remove,
- .suspend = corgi_ssp_suspend,
- .resume = corgi_ssp_resume,
- .driver = {
- .name = "corgi-ssp",
- },
-};
-
-int __init corgi_ssp_init(void)
-{
- return platform_driver_register(&corgissp_driver);
-}
-
-arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 6f5569bac13..d82528e74bd 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-pxa/cpu-pxa.c
+ * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
*
* Copyright (C) 2002,2003 Intrinsyc Software
*
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
new file mode 100644
index 00000000000..1ea0c9c0ada
--- /dev/null
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+
+#define HSS_104M (0)
+#define HSS_156M (1)
+#define HSS_208M (2)
+#define HSS_312M (3)
+
+#define SMCFS_78M (0)
+#define SMCFS_104M (2)
+#define SMCFS_208M (5)
+
+#define SFLFS_104M (0)
+#define SFLFS_156M (1)
+#define SFLFS_208M (2)
+#define SFLFS_312M (3)
+
+#define XSPCLK_156M (0)
+#define XSPCLK_NONE (3)
+
+#define DMCFS_26M (0)
+#define DMCFS_260M (3)
+
+struct pxa3xx_freq_info {
+ unsigned int cpufreq_mhz;
+ unsigned int core_xl : 5;
+ unsigned int core_xn : 3;
+ unsigned int hss : 2;
+ unsigned int dmcfs : 2;
+ unsigned int smcfs : 3;
+ unsigned int sflfs : 2;
+ unsigned int df_clkdiv : 3;
+
+ int vcc_core; /* in mV */
+ int vcc_sram; /* in mV */
+};
+
+#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
+{ \
+ .cpufreq_mhz = cpufreq, \
+ .core_xl = _xl, \
+ .core_xn = _xn, \
+ .hss = HSS_##_hss##M, \
+ .dmcfs = DMCFS_##_dmc##M, \
+ .smcfs = SMCFS_##_smc##M, \
+ .sflfs = SFLFS_##_sfl##M, \
+ .df_clkdiv = _dfi, \
+ .vcc_core = vcore, \
+ .vcc_sram = vsram, \
+}
+
+static struct pxa3xx_freq_info pxa300_freqs[] = {
+ /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+ OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */
+ OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+ OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+ OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+};
+
+static struct pxa3xx_freq_info pxa320_freqs[] = {
+ /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+ OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */
+ OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+ OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+ OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+ OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
+};
+
+static unsigned int pxa3xx_freqs_num;
+static struct pxa3xx_freq_info *pxa3xx_freqs;
+static struct cpufreq_frequency_table *pxa3xx_freqs_table;
+
+static int setup_freqs_table(struct cpufreq_policy *policy,
+ struct pxa3xx_freq_info *freqs, int num)
+{
+ struct cpufreq_frequency_table *table;
+ int i;
+
+ table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
+ if (table == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++) {
+ table[i].index = i;
+ table[i].frequency = freqs[i].cpufreq_mhz * 1000;
+ }
+ table[num].frequency = i;
+ table[num].frequency = CPUFREQ_TABLE_END;
+
+ pxa3xx_freqs = freqs;
+ pxa3xx_freqs_num = num;
+ pxa3xx_freqs_table = table;
+
+ return cpufreq_frequency_table_cpuinfo(policy, table);
+}
+
+static void __update_core_freq(struct pxa3xx_freq_info *info)
+{
+ uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
+ uint32_t accr = ACCR;
+ uint32_t xclkcfg;
+
+ accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
+ accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+
+ /* No clock until core PLL is re-locked */
+ accr |= ACCR_XSPCLK(XSPCLK_NONE);
+
+ xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */
+
+ ACCR = accr;
+ __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+ while ((ACSR & mask) != (accr & mask))
+ cpu_relax();
+}
+
+static void __update_bus_freq(struct pxa3xx_freq_info *info)
+{
+ uint32_t mask;
+ uint32_t accr = ACCR;
+
+ mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+ ACCR_DMCFS_MASK;
+
+ accr &= ~mask;
+ accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+ ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+
+ ACCR = accr;
+
+ while ((ACSR & mask) != (accr & mask))
+ cpu_relax();
+}
+
+static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
+}
+
+static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
+{
+ return get_clk_frequency_khz(0);
+}
+
+static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct pxa3xx_freq_info *next;
+ struct cpufreq_freqs freqs;
+ unsigned long flags;
+ int idx;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ /* Lookup the next frequency */
+ if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
+ target_freq, relation, &idx))
+ return -EINVAL;
+
+ next = &pxa3xx_freqs[idx];
+
+ freqs.old = policy->cur;
+ freqs.new = next->cpufreq_mhz * 1000;
+ freqs.cpu = policy->cpu;
+
+ pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
+ freqs.old / 1000, freqs.new / 1000,
+ (freqs.old == freqs.new) ? " (skipped)" : "");
+
+ if (freqs.old == target_freq)
+ return 0;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ local_irq_save(flags);
+ __update_core_freq(next);
+ __update_bus_freq(next);
+ local_irq_restore(flags);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret = -EINVAL;
+
+ /* set default policy and cpuinfo */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.min_freq = 104000;
+ policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
+ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+ policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+
+ if (cpu_is_pxa300() || cpu_is_pxa310())
+ ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
+
+ if (cpu_is_pxa320())
+ ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
+
+ if (ret) {
+ pr_err("failed to setup frequency table\n");
+ return ret;
+ }
+
+ pr_info("CPUFREQ support for PXA3xx initialized\n");
+ return 0;
+}
+
+static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+ .verify = pxa3xx_cpufreq_verify,
+ .target = pxa3xx_cpufreq_set,
+ .init = pxa3xx_cpufreq_init,
+ .get = pxa3xx_cpufreq_get,
+ .name = "pxa3xx-cpufreq",
+};
+
+static int __init cpufreq_init(void)
+{
+ if (cpu_is_pxa3xx())
+ return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
+
+ return 0;
+}
+module_init(cpufreq_init);
+
+static void __exit cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
+}
+module_exit(cpufreq_exit);
+
+MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 887c738f591..bb04af4b0aa 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -32,5 +32,6 @@ extern struct platform_device pxa27x_device_pwm0;
extern struct platform_device pxa27x_device_pwm1;
extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
new file mode 100644
index 00000000000..d488eded205
--- /dev/null
+++ b/arch/arm/mach-pxa/e330.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e330_init(void)
+{
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e330_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
new file mode 100644
index 00000000000..8ecbc547982
--- /dev/null
+++ b/arch/arm/mach-pxa/e350.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e350_init(void)
+{
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e350_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
new file mode 100644
index 00000000000..544bbaa2062
--- /dev/null
+++ b/arch/arm/mach-pxa/e400.c
@@ -0,0 +1,94 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include <mach/pxafb.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ set_pxa_fb_info(&e400_pxafb_mach_info);
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
deleted file mode 100644
index 263884165f5..00000000000
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * e400_lcd.c
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxafb.h>
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
- .pixclock = 140703,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .hsync_len = 4,
- .left_margin = 28,
- .right_margin = 8,
- .vsync_len = 3,
- .upper_margin = 5,
- .lower_margin = 6,
- .sync = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
- .modes = &e400_pxafb_mode_info,
- .num_modes = 1,
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = 0,
- .pxafb_backlight_power = NULL,
-};
-
-static int __init e400_lcd_init(void)
-{
- if (!machine_is_e400())
- return -ENODEV;
-
- set_pxa_fb_info(&e400_pxafb_mach_info);
- return 0;
-}
-
-module_init(e400_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e400 lcd driver");
-MODULE_LICENSE("GPLv2");
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
new file mode 100644
index 00000000000..c57a15b37f0
--- /dev/null
+++ b/arch/arm/mach-pxa/e740.c
@@ -0,0 +1,169 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &e740_fb_device,
+};
+
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
deleted file mode 100644
index 26bd599af17..00000000000
--- a/arch/arm/mach-pxa/e740_lcd.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* e740_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-/*
-**potential** shutdown routine - to be investigated
-devmem2 0x0c010528 w 0xff3fff00
-devmem2 0x0c010190 w 0x7FFF8000
-devmem2 0x0c0101b0 w 0x00FF0000
-devmem2 0x0c01008c w 0x00000000
-devmem2 0x0c010080 w 0x000000bf
-devmem2 0x0c010098 w 0x00000015
-devmem2 0x0c010088 w 0x4b000204
-devmem2 0x0c010098 w 0x0000001d
-*/
-
-static struct w100_gen_regs e740_lcd_regs = {
- .lcd_format = 0x00008023,
- .lcdd_cntl1 = 0x0f000000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x00ffff03,
- .genlcd_cntl2 = 0x003c0f03,
- .genlcd_cntl3 = 0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
- .xres = 240,
- .yres = 320,
- .left_margin = 20,
- .right_margin = 28,
- .upper_margin = 9,
- .lower_margin = 8,
- .crtc_ss = 0x80140013,
- .crtc_ls = 0x81150110,
- .crtc_gs = 0x80050005,
- .crtc_vpos_gs = 0x000a0009,
- .crtc_rev = 0x0040010a,
- .crtc_dclk = 0xa906000a,
- .crtc_gclk = 0x80050108,
- .crtc_goe = 0x80050108,
- .pll_freq = 57,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 4,
- .pixclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 1,
- .sysclk_src = CLK_SRC_PLL,
- .crtc_ps1_active = 0x41060010,
-};
-
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
- .init_data1 = 0x21002103,
- .gpio_dir1 = 0xffffdeff,
- .gpio_oe1 = 0x03c00643,
- .init_data2 = 0x003f003f,
- .gpio_dir2 = 0xffffffff,
- .gpio_oe2 = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
- .modelist = &e740_lcd_mode,
- .num_modes = 1,
- .regs = &e740_lcd_regs,
- .gpio = &e740_w100_gpio_info,
- .xtal_freq = 14318000,
- .xtal_dbl = 1,
-};
-
-static struct resource e740_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e740_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e740_fb_info,
- },
- .num_resources = ARRAY_SIZE(e740_fb_resources),
- .resource = e740_fb_resources,
-};
-
-static int e740_lcd_init(void)
-{
- int ret;
-
- if (!machine_is_e740())
- return -ENODEV;
-
- return platform_device_register(&e740_fb_device);
-}
-
-module_init(e740_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e740 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750.c
index 75edc3b5390..640e738b85d 100644
--- a/arch/arm/mach-pxa/e750_lcd.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -1,25 +1,35 @@
-/* e750_lcd.c
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
*
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
*
*/
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <video/w100fb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ---------------------- E750 LCD definitions -------------------- */
static struct w100_gen_regs e750_lcd_regs = {
.lcd_format = 0x00008003,
@@ -54,7 +64,6 @@ static struct w100_mode e750_lcd_mode = {
.sysclk_src = CLK_SRC_PLL,
};
-
static struct w100_gpio_regs e750_w100_gpio_info = {
.init_data1 = 0x01192f1b,
.gpio_dir1 = 0xd5ffdeff,
@@ -81,9 +90,6 @@ static struct resource e750_fb_resources[] = {
},
};
-/* ----------------------- device declarations -------------------------- */
-
-
static struct platform_device e750_fb_device = {
.name = "w100fb",
.id = -1,
@@ -94,16 +100,27 @@ static struct platform_device e750_fb_device = {
.resource = e750_fb_resources,
};
-static int e750_lcd_init(void)
-{
- if (!machine_is_e750())
- return -ENODEV;
+/* ----------------------------------------------------------------------- */
- return platform_device_register(&e750_fb_device);
+static struct platform_device *devices[] __initdata = {
+ &e750_fb_device,
+};
+
+static void __init e750_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
}
-module_init(e750_lcd_init);
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e750_init,
+ .timer = &pxa_timer,
+MACHINE_END
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e750 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800.c
index e6aeab0ebc2..a293e09bfe2 100644
--- a/arch/arm/mach-pxa/e800_lcd.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -1,25 +1,36 @@
-/* e800_lcd.c
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
*
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
*
*/
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <video/w100fb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ e800 LCD definitions ------------------------- */
static struct w100_gen_regs e800_lcd_regs = {
.lcd_format = 0x00008003,
@@ -71,8 +82,8 @@ static struct w100_mode e800_lcd_mode[2] = {
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x00000000,
.pll_freq = 100,
- .pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */
- .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+ .pixclk_divider = 6, /* Wince uses 14 which gives a */
+ .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
@@ -131,9 +142,6 @@ static struct resource e800_fb_resources[] = {
},
};
-/* ----------------------- device declarations -------------------------- */
-
-
static struct platform_device e800_fb_device = {
.name = "w100fb",
.id = -1,
@@ -144,16 +152,35 @@ static struct platform_device e800_fb_device = {
.resource = e800_fb_resources,
};
-static int e800_lcd_init(void)
-{
- if (!machine_is_e800())
- return -ENODEV;
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
- return platform_device_register(&e800_fb_device);
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &e800_fb_device,
+};
+
+static void __init e800_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_udc_info(&e800_udc_mach_info);
}
-module_init(e800_lcd_init);
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e800_init,
+ .timer = &pxa_timer,
+MACHINE_END
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e800 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 7a0a681a584..f5ed8038ede 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -373,10 +373,6 @@ static inline void em_x270_init_nand(void) {}
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
- /* Set the Power Control Polarity Low */
- UHCHR = (UHCHR | UHCHR_PCPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
/* enable port 2 transiever */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
@@ -385,6 +381,7 @@ static int em_x270_ohci_init(struct device *dev)
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.init = em_x270_ohci_init,
};
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 001a252bd51..d28849b50a1 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -19,68 +19,13 @@
#include <mach/mfp-pxa25x.h>
#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
#include "generic.h"
-static unsigned long e740_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-static unsigned long e400_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
/* Only e800 has 128MB RAM */
-static void __init eseries_fixup(struct machine_desc *desc,
+void __init eseries_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
mi->nr_banks=1;
@@ -92,95 +37,9 @@ static void __init eseries_fixup(struct machine_desc *desc,
mi->bank[0].size = (64*1024*1024);
}
-static void __init e740_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-}
-
-static void __init e400_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-}
-
-/* e-series machine definitions */
-
-#ifdef CONFIG_MACH_E330
-MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-MACHINE_START(E350, "Toshiba e350")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e740_init,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e400_init,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
+struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+ .gpio_vbus = GPIO_E7XX_USB_DISC,
+ .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
new file mode 100644
index 00000000000..a83f88d4b6a
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.h
@@ -0,0 +1,4 @@
+void __init eseries_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi);
+
+extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
deleted file mode 100644
index d622c04c0d4..00000000000
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * UDC functions for the Toshiba e-series PDAs
- *
- * Copyright (c) Ian Molton 2003
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <mach/udc.h>
-#include <mach/eseries-gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/domain.h>
-
-/* local PXA generic code */
-#include "generic.h"
-
-static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
- .gpio_vbus = GPIO_E7XX_USB_DISC,
- .gpio_pullup = GPIO_E7XX_USB_PULLUP,
- .gpio_pullup_inverted = 1
-};
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
- .gpio_vbus = GPIO_E800_USB_DISC,
- .gpio_pullup = GPIO_E800_USB_PULLUP,
- .gpio_pullup_inverted = 1
-};
-
-static int __init eseries_udc_init(void)
-{
- if (machine_is_e330() || machine_is_e350() ||
- machine_is_e740() || machine_is_e750() ||
- machine_is_e400())
- pxa_set_udc_info(&e7xx_udc_mach_info);
- else if (machine_is_e800())
- pxa_set_udc_info(&e800_udc_mach_info);
-
- return 0;
-}
-
-module_init(eseries_udc_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("eseries UDC support");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ceaed007636..85ed0b33331 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -46,7 +46,7 @@ void clear_reset_status(unsigned int mask)
*/
unsigned int get_clk_frequency_khz(int info)
{
- if (cpu_is_pxa21x() || cpu_is_pxa25x())
+ if (cpu_is_pxa25x())
return pxa25x_get_clk_frequency_khz(info);
else if (cpu_is_pxa27x())
return pxa27x_get_clk_frequency_khz(info);
@@ -60,7 +60,7 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
*/
unsigned int get_memclk_frequency_10khz(void)
{
- if (cpu_is_pxa21x() || cpu_is_pxa25x())
+ if (cpu_is_pxa25x())
return pxa25x_get_memclk_frequency_10khz();
else if (cpu_is_pxa27x())
return pxa27x_get_memclk_frequency_10khz();
@@ -88,11 +88,6 @@ static struct map_desc standard_io_desc[] __initdata = {
.pfn = __phys_to_pfn(0x48000000),
.length = 0x00200000,
.type = MT_DEVICE
- }, { /* USB host */
- .virtual = 0xf8000000,
- .pfn = __phys_to_pfn(0x4c000000),
- .length = 0x00100000,
- .type = MT_DEVICE
}, { /* Camera */
.virtual = 0xfa000000,
.pfn = __phys_to_pfn(0x50000000),
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 041c048320e..dc876a8e666 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -65,4 +65,5 @@ static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
extern struct sysdev_class pxa_irq_sysclass;
extern struct sysdev_class pxa_gpio_sysclass;
+extern struct sysdev_class pxa2xx_mfp_sysclass;
extern struct sysdev_class pxa3xx_mfp_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 07acc1b2385..14930cf8be7 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -16,10 +16,10 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <asm/gpio.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
@@ -275,7 +275,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
n = PXA_GPIO_IRQ_BASE + bit;
- desc_handle_irq(n, irq_desc + n);
+ generic_handle_irq(n);
bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index c0092472fa5..d8962a0fb98 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,8 +20,12 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -40,7 +44,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include "generic.h"
@@ -85,21 +89,8 @@ static struct platform_device *devices[] __initdata = {
};
#ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data;
-
-static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int,
- void *data)
-{
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO53_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
- return 0;
-}
-
static struct pxamci_platform_data gumstix_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = gumstix_mci_init,
};
static void __init gumstix_mmc_init(void)
@@ -109,11 +100,11 @@ static void __init gumstix_mmc_init(void)
#else
static void __init gumstix_mmc_init(void)
{
- printk(KERN_INFO "Gumstix mmc disabled\n");
+ pr_debug("Gumstix mmc disabled\n");
}
#endif
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
@@ -126,12 +117,87 @@ static void __init gumstix_udc_init(void)
#else
static void gumstix_udc_init(void)
{
- printk(KERN_INFO "Gumstix udc is disabled\n");
+ pr_debug("Gumstix udc is disabled\n");
}
#endif
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+ int timeout = 500;
+
+ if (!(OSCC & OSCC_OOK))
+ pr_warning("32kHz clock was not on. Bootloader may need to "
+ "be updated\n");
+ else
+ return;
+
+ OSCC |= OSCC_OON;
+ do {
+ if (OSCC & OSCC_OOK)
+ break;
+ udelay(1);
+ } while (--timeout);
+ if (!timeout)
+ pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+ int err;
+
+ gumstix_setup_bt_clock();
+
+ err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+ if (err) {
+ pr_err("gumstix: failed request gpio for bluetooth reset\n");
+ return;
+ }
+
+ err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+ if (err) {
+ pr_err("gumstix: can't reset bluetooth\n");
+ return;
+ }
+ gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+ udelay(100);
+ gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+ pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+ GPIO12_32KHz,
+ /* BTUART */
+ GPIO42_HWUART_RXD,
+ GPIO43_HWUART_TXD,
+ GPIO44_HWUART_CTS,
+ GPIO45_HWUART_RTS,
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO53_MMC_CLK,
+ GPIO8_MMC_CS0,
+ /* these are used by AM200EPD */
+ GPIO51_GPIO,
+ GPIO49_GPIO,
+ GPIO48_GPIO,
+ GPIO32_GPIO,
+ GPIO17_GPIO,
+ GPIO16_GPIO,
+};
+
static void __init gumstix_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+ gumstix_bluetooth_init();
gumstix_udc_init();
gumstix_mmc_init();
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5aa0270d560..013b15baa03 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -32,7 +32,7 @@
#include <asm/mach/map.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
@@ -46,6 +46,47 @@
* - Ethernet interrupt
*/
+static unsigned long idp_pin_config[] __initdata = {
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* Ethernet */
+ GPIO33_nCS_5, /* Ethernet CS */
+ GPIO4_GPIO, /* Ethernet IRQ */
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = (IDP_ETH_PHYS + 0x300),
@@ -121,44 +162,28 @@ static struct pxafb_mach_info sharp_lm8v31 = {
.num_modes = 1,
.cmap_inverse = 0,
.cmap_static = 0,
- .lccr0 = LCCR0_SDS,
- .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(255),
.pxafb_backlight_power = &idp_backlight_power,
.pxafb_lcd_power = &idp_lcd_power
};
-static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data)
-{
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
- return 0;
-}
-
static struct pxamci_platform_data idp_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = idp_mci_init,
};
static void __init idp_init(void)
{
printk("idp_init()\n");
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&idp_mci_platform_data);
}
-static void __init idp_init_irq(void)
-{
-
- pxa25x_init_irq();
-
- set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
-}
-
static struct map_desc idp_io_desc[] __initdata = {
{
.virtual = IDP_COREVOLT_VIRT,
@@ -177,15 +202,6 @@ static void __init idp_map_io(void)
{
pxa_map_io();
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-
- // serial ports 2 & 3
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
-
}
@@ -194,7 +210,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = idp_map_io,
- .init_irq = idp_init_irq,
+ .init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
deleted file mode 100644
index 5d8cc1d9cb1..00000000000
--- a/arch/arm/mach-pxa/include/mach/akita.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardware specific definitions for SL-C1000 (Akita)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/* Akita IO Expander GPIOs */
-
-#define AKITA_IOEXP_RESERVED_7 (1 << 7)
-#define AKITA_IOEXP_IR_ON (1 << 6)
-#define AKITA_IOEXP_AKIN_PULLUP (1 << 5)
-#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4)
-#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3)
-#define AKITA_IOEXP_MIC_BIAS (1 << 2)
-#define AKITA_IOEXP_RESERVED_1 (1 << 1)
-#define AKITA_IOEXP_RESERVED_0 (1 << 0)
-
-/* Direction Bitfield 0=output 1=input */
-#define AKITA_IOEXP_IO_DIR 0
-/* Default Values */
-#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
-
-extern struct platform_device akitaioexp_device;
-
-void akita_set_ioexp(struct device *dev, unsigned char bitmask);
-void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
-
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index bf856503baf..585970ef08c 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -98,12 +98,21 @@
CORGI_SCP_MIC_BIAS )
#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0)
+#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */
+#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */
+#define CORGI_GPIO_MUTE_L (CORGI_SCOOP_GPIO_BASE + 3)
+#define CORGI_GPIO_MUTE_R (CORGI_SCOOP_GPIO_BASE + 4)
+#define CORGI_GPIO_AKIN_PULLUP (CORGI_SCOOP_GPIO_BASE + 5)
+#define CORGI_GPIO_APM_ON (CORGI_SCOOP_GPIO_BASE + 6)
+#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7)
+#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8)
/*
* Shared data structures
*/
extern struct platform_device corgiscoop_device;
-extern struct platform_device corgissp_device;
#endif /* __ASM_ARCH_CORGI_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index de16c12d523..f6b4bf3e73d 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #31
- add \irqnr, \irqnr, #32
+ add \irqnr, \irqnr, #(32 + PXA_IRQ(0))
b 1001f
1003:
mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
@@ -52,6 +52,6 @@
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
+ rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
1001:
.endm
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e89df4d0d23..a582a6d9b92 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -62,26 +62,74 @@
#ifndef __ASSEMBLY__
+#include <asm/cputype.h>
+
+/*
+ * CPU Stepping CPU_ID JTAG_ID
+ *
+ * PXA210 B0 0x69052922 0x2926C013
+ * PXA210 B1 0x69052923 0x3926C013
+ * PXA210 B2 0x69052924 0x4926C013
+ * PXA210 C0 0x69052D25 0x5926C013
+ *
+ * PXA250 A0 0x69052100 0x09264013
+ * PXA250 A1 0x69052101 0x19264013
+ * PXA250 B0 0x69052902 0x29264013
+ * PXA250 B1 0x69052903 0x39264013
+ * PXA250 B2 0x69052904 0x49264013
+ * PXA250 C0 0x69052D05 0x59264013
+ *
+ * PXA255 A0 0x69052D06 0x69264013
+ *
+ * PXA26x A0 0x69052903 0x39264013
+ * PXA26x B0 0x69052D05 0x59264013
+ *
+ * PXA27x A0 0x69054110 0x09265013
+ * PXA27x A1 0x69054111 0x19265013
+ * PXA27x B0 0x69054112 0x29265013
+ * PXA27x B1 0x69054113 0x39265013
+ * PXA27x C0 0x69054114 0x49265013
+ * PXA27x C5 0x69054117 0x79265013
+ *
+ * PXA30x A0 0x69056880 0x0E648013
+ * PXA30x A1 0x69056881 0x1E648013
+ * PXA31x A0 0x69056890 0x0E649013
+ * PXA31x A1 0x69056891 0x1E649013
+ * PXA31x A2 0x69056892 0x2E649013
+ * PXA32x B1 0x69056825 0x5E642013
+ * PXA32x B2 0x69056826 0x6E642013
+ *
+ * PXA930 B0 0x69056835 0x5E643013
+ * PXA930 B1 0x69056837 0x7E643013
+ * PXA930 B2 0x69056838 0x8E643013
+ */
#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id) \
+#define __cpu_is_pxa210(id) \
({ \
- unsigned int _id = (id) >> 4 & 0xf3f; \
- _id == 0x212; \
+ unsigned int _id = (id) & 0xf3f0; \
+ _id == 0x2120; \
})
-#define __cpu_is_pxa255(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x2d0; \
- })
+#define __cpu_is_pxa250(id) \
+ ({ \
+ unsigned int _id = (id) & 0xf3ff; \
+ _id <= 0x2105; \
+ })
+
+#define __cpu_is_pxa255(id) \
+ ({ \
+ unsigned int _id = (id) & 0xffff; \
+ _id == 0x2d06; \
+ })
#define __cpu_is_pxa25x(id) \
({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x2d0 || _id == 0x290; \
+ unsigned int _id = (id) & 0xf300; \
+ _id == 0x2100; \
})
#else
-#define __cpu_is_pxa21x(id) (0)
+#define __cpu_is_pxa210(id) (0)
+#define __cpu_is_pxa250(id) (0)
#define __cpu_is_pxa255(id) (0)
#define __cpu_is_pxa25x(id) (0)
#endif
@@ -136,9 +184,14 @@
#define __cpu_is_pxa930(id) (0)
#endif
-#define cpu_is_pxa21x() \
+#define cpu_is_pxa210() \
({ \
- __cpu_is_pxa21x(read_cpuid_id()); \
+ __cpu_is_pxa210(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa250() \
+ ({ \
+ __cpu_is_pxa250(read_cpuid_id()); \
})
#define cpu_is_pxa255() \
@@ -151,6 +204,8 @@
__cpu_is_pxa25x(read_cpuid_id()); \
})
+extern int cpu_is_pxa26x(void);
+
#define cpu_is_pxa27x() \
({ \
__cpu_is_pxa27x(read_cpuid_id()); \
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 80596b01344..1a9f65e6ec0 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -65,13 +65,18 @@ struct i2c_pxa_platform_data {
unsigned int slave_addr;
struct i2c_slave_client *slave;
unsigned int class;
- int use_pio;
+ unsigned int use_pio :1;
+ unsigned int fast_mode :1;
};
extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
#ifdef CONFIG_PXA27x
-extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
#endif
#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 108b5db9b2a..9c163e19ada 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -11,7 +11,14 @@
*/
-#define PXA_IRQ(x) (x)
+#ifdef CONFIG_PXA_HAVE_ISA_IRQS
+#define PXA_ISA_IRQ(x) (x)
+#define PXA_ISA_IRQ_NUM (16)
+#else
+#define PXA_ISA_IRQ_NUM (0)
+#endif
+
+#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x))
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
@@ -73,7 +80,7 @@
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
#endif
-#define PXA_GPIO_IRQ_BASE (64)
+#define PXA_GPIO_IRQ_BASE PXA_IRQ(64)
#define PXA_GPIO_IRQ_NUM (128)
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
@@ -178,13 +185,7 @@
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
- defined(CONFIG_MACH_LOGICPD_PXA270) || \
- defined(CONFIG_MACH_TOSA) || \
- defined(CONFIG_MACH_MAINSTONE) || \
- defined(CONFIG_MACH_PCM027) || \
- defined(CONFIG_ARCH_PXA_ESERIES) || \
- defined(CONFIG_MACH_MAGICIAN)
+#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_MACH_ZYLONITE)
#define NR_IRQS (IRQ_BOARD_START + 32)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 79d209b826f..5c4e320c143 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -3,4 +3,6 @@
#define LITTLETON_ETH_PHYS 0x30000000
+#define LITTLETON_GPIO_LCD_CS (17)
+
#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 552eb7fa657..59aef89808d 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -40,11 +40,11 @@
#define NODE_MEM_SIZE_BITS 26
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
+void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
unsigned long *holes);
#define arch_adjust_zones(node, size, holes) \
- cmx270_pci_adjust_zones(node, size, holes)
+ cmx2xx_pci_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 6c8e72238bf..617cab2cc8d 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -17,7 +17,7 @@
/* Crystal and Clock Signals */
#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO70_RTCCLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
@@ -156,6 +156,6 @@
#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 74990510cf3..67f8385ea54 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -257,10 +257,10 @@
#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2)
#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5)
-#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO69_SSP3_SCLK MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 8769567b389..482185053a9 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -274,12 +274,13 @@ typedef unsigned long mfp_cfg_t;
#define MFP_DS_MASK (0x7 << 13)
#define MFP_DS(x) (((x) >> 13) & 0x7)
-#define MFP_LPM_INPUT (0x0 << 16)
+#define MFP_LPM_DEFAULT (0x0 << 16)
#define MFP_LPM_DRIVE_LOW (0x1 << 16)
#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
#define MFP_LPM_PULL_LOW (0x3 << 16)
#define MFP_LPM_PULL_HIGH (0x4 << 16)
#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_INPUT (0x6 << 16)
#define MFP_LPM_STATE_MASK (0x7 << 16)
#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
@@ -297,7 +298,7 @@ typedef unsigned long mfp_cfg_t;
#define MFP_PULL_MASK (0x3 << 21)
#define MFP_PULL(x) (((x) >> 21) & 0x3)
-#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
#define MFP_CFG(pin, af) \
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
new file mode 100644
index 00000000000..8483cb51183
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -0,0 +1,67 @@
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_nEN 9
+#define GPIO18_POWEROFF 18
+#define GPIO87_LCD_POWER 87
+
+/* USB */
+#define GPIO13_USB_DETECT 13
+#define GPIO22_USB_ENABLE 22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO 78
+#define GPIO15_SDIO_INSERT 15
+#define GPIO91_SDIO_EN 91
+
+/* Bluetooth */
+#define GPIO83_BT_ON 83
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1 23
+#define GPIO26_GPS_ON 26
+#define GPIO27_GPS_RESET 27
+#define GPIO106_GPS_UNKNOWN2 106
+#define GPIO107_GPS_UNKNOWN3 107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD 24
+#define GPIO88_GSM_nMOD_ON_CMD 88
+#define GPIO90_GSM_nMOD_OFF_CMD 90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 114
+#define GPIO25_GSM_MOD_ON_STATE 25
+#define GPIO113_GSM_EVENT 113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT 12
+
+/* LEDS */
+#define GPIO10_LED_nCharging 10
+#define GPIO97_LED_nBlue 97
+#define GPIO98_LED_nOrange 98
+#define GPIO82_LED_nVibra 82
+#define GPIO115_LED_nKeyboard 115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER 0
+#define GPIO93_KEY_VOLUME_UP 93
+#define GPIO94_KEY_VOLUME_DOWN 94
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
index e848a47128c..95b6e2a6e51 100644
--- a/arch/arm/mach-pxa/include/mach/ohci.h
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -7,6 +7,22 @@ struct pxaohci_platform_data {
int (*init)(struct device *);
void (*exit)(struct device *);
+ unsigned long flags;
+#define ENABLE_PORT1 (1 << 0)
+#define ENABLE_PORT2 (1 << 1)
+#define ENABLE_PORT3 (1 << 2)
+#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW (1 << 3)
+#define POWER_CONTROL_LOW (1 << 4)
+#define NO_OC_PROTECTION (1 << 5)
+#define OC_MODE_GLOBAL (0 << 6)
+#define OC_MODE_PERPORT (1 << 6)
+
+ int power_on_delay; /* Power On to Power Good time - in ms
+ * HCD must wait for this duration before
+ * accessing a powered on port
+ */
int port_mode;
#define PMM_NPS_MODE 1
#define PMM_GLOBAL_MODE 2
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
new file mode 100644
index 00000000000..5032307ebf7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -0,0 +1,80 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors: Alex Osborne <bobofdoom@gmail.com>
+ * Jan Herman <2hp@seznam.cz>
+ * Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET 1
+#define GPIO_NR_PALMZ72_POWER_DETECT 0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N 14
+#define GPIO_NR_PALMZ72_SD_POWER_N 98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE 49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N 15
+#define GPIO_NR_PALMZ72_USB_POWER 95
+#define GPIO_NR_PALMZ72_USB_PULLUP 12
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER 20
+#define GPIO_NR_PALMZ72_LCD_POWER 96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN 88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER 17
+#define GPIO_NR_PALMZ72_BT_RESET 83
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMZ72_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY 0xFE
+#define PALMZ72_DEFAULT_INTENSITY 0x7E
+#define PALMZ72_LIMIT_MASK 0x7F
+#define PALMZ72_PRESCALER 0x3F
+#define PALMZ72_PERIOD_NS 3500
+
+#ifdef CONFIG_PM
+struct palmz72_resume_info {
+ u32 magic0; /* 0x0 */
+ u32 magic1; /* 0x4 */
+ u32 resume_addr; /* 0x8 */
+ u32 pad[11]; /* 0xc..0x37 */
+ u32 arm_control; /* 0x38 */
+ u32 aux_control; /* 0x3c */
+ u32 ttb; /* 0x40 */
+ u32 domain_access; /* 0x44 */
+ u32 process_id; /* 0x48 */
+};
+#endif
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 261e5bc958d..83342469aca 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -15,6 +15,8 @@ struct pxa_cpu_pm_fns {
void (*restore)(unsigned long *);
int (*valid)(suspend_state_t state);
void (*enter)(suspend_state_t state);
+ int (*prepare)(void);
+ void (*finish)(void);
};
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 67debc47e8c..0b3e6d051c6 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -23,6 +23,7 @@
#define POODLE_GPIO_AC_IN (1)
#define POODLE_GPIO_CO 16
#define POODLE_GPIO_TP_INT (5)
+#define POODLE_GPIO_TP_CS (24)
#define POODLE_GPIO_WAKEUP (11) /* change battery */
#define POODLE_GPIO_GA_INT (10)
#define POODLE_GPIO_IR_ON (22)
@@ -70,6 +71,14 @@
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
+#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
+#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
+#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
+#define POODLE_GPIO_L_PCLK (POODLE_SCOOP_GPIO_BASE + 9)
+#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10)
+#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11)
+
#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 12288ca3cbb..15295d96000 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -69,30 +69,18 @@
/*
* DMA Controller
*/
-
-#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
-#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
-#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
-#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
-#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
-#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
-#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
-#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
-#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
-#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
-#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
-#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
-#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
-#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
-#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
-#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
-
#define DCSR(x) __REG2(0x40000000, (x) << 2)
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
@@ -101,11 +89,6 @@
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
@@ -114,145 +97,9 @@
&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
&__REG2(0x40001100, ((n) & 0x3f) << 2)))
-#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23 __REG(0x4000015c) /* Reserved */
-#define DRCMR24 __REG(0x40000160) /* Reserved */
-#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29 __REG(0x40000174) /* Reserved */
-#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34 __REG(0x40000188) /* Reserved */
-#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39 __REG(0x4000019C) /* Reserved */
-#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR DRCMR2
-#define DRCMRTXSADR DRCMR3
-#define DRCMRRXBTRBR DRCMR4
-#define DRCMRTXBTTHR DRCMR5
-#define DRCMRRXFFRBR DRCMR6
-#define DRCMRTXFFTHR DRCMR7
-#define DRCMRRXMCDR DRCMR8
-#define DRCMRRXMODR DRCMR9
-#define DRCMRTXMODR DRCMR10
-#define DRCMRRXPCDR DRCMR11
-#define DRCMRTXPCDR DRCMR12
-#define DRCMRRXSSDR DRCMR13
-#define DRCMRTXSSDR DRCMR14
-#define DRCMRRXSS2DR DRCMR15
-#define DRCMRTXSS2DR DRCMR16
-#define DRCMRRXICDR DRCMR17
-#define DRCMRTXICDR DRCMR18
-#define DRCMRRXSTRBR DRCMR19
-#define DRCMRTXSTTHR DRCMR20
-#define DRCMRRXMMC DRCMR21
-#define DRCMRTXMMC DRCMR22
-#define DRCMRRXSS3DR DRCMR66
-#define DRCMRTXSS3DR DRCMR67
-#define DRCMRUDC(x) DRCMR((x) + 24)
-
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
-#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
-#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
-#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
-#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
-#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
-#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
-#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
-#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
-#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
-#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
-#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
-#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
-#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
-#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
-#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
-#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
-#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
-#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
-#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
-#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
-#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
-#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
-#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
-#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
-#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
-#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
-#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
-#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
-#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
-#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
-#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
-#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
-#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
-#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
-#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
-#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
-#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
-#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
-#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
-#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
-#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
-#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
-#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
-#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
-#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
-#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
-#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
-
#define DDADR(x) __REG2(0x40000200, (x) << 4)
#define DSADR(x) __REG2(0x40000204, (x) << 4)
#define DTADR(x) __REG2(0x40000208, (x) << 4)
@@ -418,91 +265,13 @@
/*
- * I2C registers
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
*/
-#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
-#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
-#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
-#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
-#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
-#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START (1 << 0) /* start bit */
-#define ICR_STOP (1 << 1) /* stop bit */
-#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
-#define ICR_TB (1 << 3) /* transfer byte bit */
-#define ICR_MA (1 << 4) /* master abort */
-#define ICR_SCLE (1 << 5) /* master clock enable */
-#define ICR_IUE (1 << 6) /* unit enable */
-#define ICR_GCD (1 << 7) /* general call disable */
-#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
-#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
-#define ICR_BEIE (1 << 10) /* enable bus error ints */
-#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
-#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
-#define ICR_SADIE (1 << 13) /* slave address detected int enable */
-#define ICR_UR (1 << 14) /* unit reset */
-
-#define ISR_RWM (1 << 0) /* read/write mode */
-#define ISR_ACKNAK (1 << 1) /* ack/nak status */
-#define ISR_UB (1 << 2) /* unit busy */
-#define ISR_IBB (1 << 3) /* bus busy */
-#define ISR_SSD (1 << 4) /* slave stop detected */
-#define ISR_ALD (1 << 5) /* arbitration loss detected */
-#define ISR_ITE (1 << 6) /* tx buffer empty */
-#define ISR_IRF (1 << 7) /* rx buffer full */
-#define ISR_GCAD (1 << 8) /* general call address detected */
-#define ISR_SAD (1 << 9) /* slave address detected */
-#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
-
-
/*
- * Serial Audio Controller
+ * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
*/
-#define SACR0 __REG(0x40400000) /* Global Control Register */
-#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
-#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
-#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
-#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
-#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
-#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
-#define SACR0_ENB (1 << 0) /* Enable I2S Link */
-#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
-#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
-#define SACR1_DREC (1 << 3) /* Disable Recording Function */
-#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
-
-#define SASR0_I2SOFF (1 << 7) /* Controller Status */
-#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
-#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
-#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
-#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
-#define SASR0_BSY (1 << 2) /* I2S Busy */
-#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
-#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
-
-#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
-
/*
* AC97 Controller registers
*/
@@ -989,77 +758,6 @@
#endif
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS (0x4C000000)
-#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
-
-#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
-#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
-#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
-#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
-
-#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
-#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
-#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
-#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
-#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
-#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
-#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
-#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
-
-#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
-#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
- Interrupt Enable*/
-#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
-
-#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
/* PWRMODE register M field values */
#define PWRMODE_IDLE 0x1
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 39eb68319e2..b1fcd10ab6c 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,28 @@
#define CKENB __REG(0x41340010) /* B Clock Enable Register */
#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
+#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */
+#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */
+#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x) (((x) & 0x7) << 23)
+#define ACCR_SFLFS(x) (((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x) (((x) & 0x3) << 16)
+#define ACCR_HSS(x) (((x) & 0x3) << 14)
+#define ACCR_DMCFS(x) (((x) & 0x3) << 12)
+#define ACCR_XN(x) (((x) & 0x7) << 8)
+#define ACCR_XL(x) ((x) & 0x1f)
+
/*
* Clock Enable Bit
*/
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index bd14365f7ed..31ac26b55bc 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -16,6 +16,7 @@
#endif
#include <linux/fb.h>
+#include <linux/gpio.h>
/* Spitz/Akita GPIOs */
@@ -100,13 +101,24 @@
#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */
#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */
-#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
- SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_SUS_SET 0
+#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8)
+
/* Spitz Scoop Device (No. 2) GPIOs */
/* Suspend States in comments */
#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */
@@ -119,15 +131,36 @@
#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */
#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7)
/* Spitz IRQ Definitions */
@@ -154,5 +187,4 @@
*/
extern struct platform_device spitzscoop_device;
extern struct platform_device spitzscoop2_device;
-extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index a012882c9ee..cb5cb766f0f 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -20,6 +20,7 @@
#define __ASM_ARCH_SSP_H
#include <linux/list.h>
+#include <linux/io.h>
enum pxa_ssp_type {
SSP_UNDEFINED = 0,
@@ -78,6 +79,29 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
void ssp_exit(struct ssp_dev *dev);
+/**
+ * ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+ __raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+ return __raw_readl(dev->mmio_base + reg);
+}
+
struct ssp_device *ssp_request(int port, const char *label);
void ssp_free(struct ssp_device *);
#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 641d0ec110b..903e1a2e664 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -17,11 +17,16 @@
#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */
#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */
-#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */
-#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */
-#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/
-#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/
-#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/
+ /* Logic on ConXS-board CSFR register*/
+#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS)
+ /* Logic on ConXS-board BOCR register*/
+#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000)
+ /* Logic on ConXS-board IRCR register*/
+#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000)
+ /* Logic on ConXS-board UPSR register*/
+#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000)
+ /* Logic on ConXS-board DICR register*/
+#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000)
/* virtual memory regions */
#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */
@@ -54,6 +59,15 @@
#define GPIO_MMC_DET 12
#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET)
+/* DOC NAND chip */
+#define GPIO_DOC_LOCK 94
+#define GPIO_DOC_IRQ 93
+#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ)
+
+/* SPI interface */
+#define GPIO_SPI 53
+#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI)
+
/* LEDS using tx2 / rx2 */
#define GPIO_SYS_BUSY_LED 46
#define GPIO_HEARTBEAT_LED 47
@@ -62,24 +76,66 @@
#define GPIO_PIC 0
#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC)
-#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+/* for CONXS base board define these registers */
+#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#define IRCR_P2V(x) ((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
+#define IRCR_V2P(x) ((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
#ifndef __ASSEMBLY__
-#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
-#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000)))
-#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+static inline unsigned short CFSR_readw(void)
+{
+ /* [Compact Flash Status Register] is read only */
+ return *((unsigned short *)CFSR_P2V(0x0C000000));
+}
+static inline void BCR_writew(unsigned short value)
+{
+ /* [Board Control Regsiter] is write only */
+ *((unsigned short *)BCR_P2V(0x0E000000)) = value;
+}
+static inline void DCR_writew(unsigned short value)
+{
+ /* [Display Control Register] is write only */
+ *((unsigned short *)DCR_P2V(0x0E000000)) = value;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+ /* [InfraRed data Control Register] is write only */
+ *((unsigned short *)IRCR_P2V(0x0E000000)) = value;
+}
#else
#define ConXS_CFSR CFSR_P2V(0x0C000000)
#define ConXS_BCR BCR_P2V(0x0E000000)
#define ConXS_DCR DCR_P2V(0x0F800000)
+#define ConXS_IRCR IRCR_P2V(0x0F800000)
#endif
+#else
+/* for whatever baseboard define function registers */
+static inline unsigned short CFSR_readw(void)
+{
+ return 0;
+}
+static inline void BCR_writew(unsigned short value)
+{
+ ;
+}
+static inline void DCR_writew(unsigned short value)
+{
+ ;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+ ;
+}
+#endif /* CONFIG_MACH_TRIZEPS_CONXS */
#define ConXS_CFSR_BVD_MASK 0x0003
#define ConXS_CFSR_BVD1 (1 << 0)
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
new file mode 100644
index 00000000000..10988c270ca
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-pxa/include/mach/viper.h
+ *
+ * Author: Ian Campbell
+ * Created: Feb 03, 2003
+ * Copyright: Arcom Control Systems.
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Created based on lubbock.h:
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_VIPER_H
+#define ARCH_VIPER_H
+
+#define VIPER_BOOT_PHYS PXA_CS0_PHYS
+#define VIPER_FLASH_PHYS PXA_CS1_PHYS
+#define VIPER_ETH_PHYS PXA_CS2_PHYS
+#define VIPER_USB_PHYS PXA_CS3_PHYS
+#define VIPER_ETH_DATA_PHYS PXA_CS4_PHYS
+#define VIPER_CPLD_PHYS PXA_CS5_PHYS
+
+#define VIPER_CPLD_BASE (0xf0000000)
+#define VIPER_PC104IO_BASE (0xf1000000)
+#define VIPER_USB_BASE (0xf1800000)
+
+#define VIPER_ETH_GPIO (0)
+#define VIPER_CPLD_GPIO (1)
+#define VIPER_USB_GPIO (2)
+#define VIPER_UARTA_GPIO (4)
+#define VIPER_UARTB_GPIO (3)
+#define VIPER_CF_CD_GPIO (32)
+#define VIPER_CF_RDY_GPIO (8)
+#define VIPER_BCKLIGHT_EN_GPIO (9)
+#define VIPER_LCD_EN_GPIO (10)
+#define VIPER_PSU_DATA_GPIO (6)
+#define VIPER_PSU_CLK_GPIO (11)
+#define VIPER_UART_SHDN_GPIO (12)
+#define VIPER_BRIGHTNESS_GPIO (16)
+#define VIPER_PSU_nCS_LD_GPIO (19)
+#define VIPER_UPS_GPIO (20)
+#define VIPER_CF_POWER_GPIO (82)
+#define VIPER_TPM_I2C_SDA_GPIO (26)
+#define VIPER_TPM_I2C_SCL_GPIO (27)
+#define VIPER_RTC_I2C_SDA_GPIO (83)
+#define VIPER_RTC_I2C_SCL_GPIO (84)
+
+#define VIPER_CPLD_P2V(x) ((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
+#define VIPER_CPLD_V2P(x) ((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __VIPER_CPLD_REG(x) (*((volatile u16 *)VIPER_CPLD_P2V(x)))
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
+
+/* ... Physical addresses */
+#define _VIPER_LO_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100000)
+#define _VIPER_ICR_PHYS (VIPER_CPLD_PHYS + 0x100002)
+#define _VIPER_HI_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100004)
+#define _VIPER_VERSION_PHYS (VIPER_CPLD_PHYS + 0x100006)
+#define VIPER_UARTA_PHYS (VIPER_CPLD_PHYS + 0x300010)
+#define VIPER_UARTB_PHYS (VIPER_CPLD_PHYS + 0x300000)
+#define _VIPER_SRAM_BASE (VIPER_CPLD_PHYS + 0x800000)
+
+/* ... Virtual addresses */
+#define VIPER_LO_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
+#define VIPER_HI_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
+#define VIPER_VERSION __VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
+#define VIPER_ICR __VIPER_CPLD_REG(_VIPER_ICR_PHYS)
+
+/* Decode VIPER_VERSION register */
+#define VIPER_CPLD_REVISION(x) (((x) >> 5) & 0x7)
+#define VIPER_BOARD_VERSION(x) (((x) >> 3) & 0x3)
+#define VIPER_BOARD_ISSUE(x) (((x) >> 0) & 0x7)
+
+/* Interrupt and Configuration Register (VIPER_ICR) */
+/* This is a write only register. Only CF_RST is used under Linux */
+
+extern void viper_cf_rst(int state);
+
+#define VIPER_ICR_RETRIG (1 << 0)
+#define VIPER_ICR_AUTO_CLR (1 << 1)
+#define VIPER_ICR_R_DIS (1 << 2)
+#define VIPER_ICR_CF_RST (1 << 3)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5e95c5372fe..fa69c3a6a38 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -57,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
pxa_internal_irq_nr = irq_nr;
- for (irq = 0; irq < irq_nr; irq += 32) {
+ for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
_ICMR(irq) = 0; /* disable all IRQs */
_ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
}
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
deleted file mode 100644
index 3bc29007df3..00000000000
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-trizeps4.c
- *
- * Author: Jürgen Schindele
- * Created: 20 02, 2006
- * Copyright: Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/types.h>
-#include <asm/leds.h>
-
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/trizeps4.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-#define SYS_BUSY 0x01
-#define HEARTBEAT 0x02
-#define BLINK 0x04
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void trizeps4_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
- pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= HEARTBEAT;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~SYS_BUSY;
- break;
-
- case led_idle_end:
- hw_led_state |= SYS_BUSY;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= BLINK;
- break;
-
- case led_green_off:
- hw_led_state &= ~BLINK;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- break;
-
- case led_red_off:
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- switch (hw_led_state) {
- case 0:
- GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- case 1:
- GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- case 2:
- GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- case 3:
- GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- }
- }
- else {
- /* turn all off */
- GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index e13eb841e48..bbe4d5f6afa 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,8 +24,6 @@ pxa_leds_init(void)
leds_event = mainstone_leds_event;
if (machine_is_pxa_idp())
leds_event = idp_leds_event;
- if (machine_is_trizeps4())
- leds_event = trizeps4_leds_event;
leds_event(led_start);
return 0;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 58f3402a037..b4d00aba0e3 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/spi/spi.h>
#include <linux/smc91x.h>
#include <asm/types.h>
@@ -38,6 +39,7 @@
#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
@@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* SSP2 */
GPIO25_SSP2_SCLK,
- GPIO17_SSP2_FRM,
GPIO27_SSP2_TXD,
+ GPIO17_GPIO, /* SFRM as chip-select */
/* Debug Ethernet */
GPIO90_GPIO,
@@ -123,160 +125,6 @@ static struct platform_device smc91x_device = {
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x) ((0x00000000) | ((x) << 9))
-#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\
- ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
- CMD0(0x1), /* reset */
- CMD0(0x0), /* nop */
- CMD0(0x0), /* nop */
- CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
- CMD0(0x29), /* Display ON */
- CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
- CMD0(0x11), /* Sleep out */
- CMD1(0xB0, 0x16), /* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
- CMD0(0x28), /* Display OFF */
- CMD2(0xB8, 0x80, 0x02), /* Output Control */
- CMD0(0x10), /* Sleep in */
- CMD1(0xB0, 0x00), /* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
- CMD1(0xB0, 0x16),
- CMD1(0xBC, 0x80),
- CMD1(0xE1, 0x00),
- CMD1(0x36, 0x50),
- CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
- CMD1(0xB0, 0x16),
- CMD1(0xBC, 0x81),
- CMD1(0xE1, 0x00),
- CMD1(0x36, 0x50),
- CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
- CMD1(0xcf, 0x02), /* Blanking period control (1) */
- CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
- CMD1(0xd1, 0x01), /* CKV timing control on/off */
- CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
- CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
- CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
- CMD1(0xd5, 0x14), /* ASW timing control (2) */
- CMD0(0x21), /* Invert for normally black display */
- CMD0(0x29), /* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
- CMD1(0xd6, 0x02), /* Blanking period control (1) */
- CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
- CMD1(0xd8, 0x01), /* CKV timing control on/off */
- CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
- CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
- CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
- CMD1(0xe0, 0x0a), /* ASW timing control (2) */
- CMD0(0x21), /* Invert for normally black display */
- CMD0(0x29), /* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
- CMD2(0xb8, 0xff, 0xf9), /* Output control */
- CMD0(0x11), /* sleep out */
- CMD1(0xba, 0x01), /* Display mode (1) */
- CMD1(0xbb, 0x00), /* Display mode (2) */
- CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
- CMD1(0xbf, 0x10), /* Drive system change control */
- CMD1(0xb1, 0x56), /* Booster operation setup */
- CMD1(0xb2, 0x33), /* Booster mode setup */
- CMD1(0xb3, 0x11), /* Booster frequency setup */
- CMD1(0xb4, 0x02), /* Op amp/system clock */
- CMD1(0xb5, 0x35), /* VCS voltage */
- CMD1(0xb6, 0x40), /* VCOM voltage */
- CMD1(0xb7, 0x03), /* External display signal */
- CMD1(0xbd, 0x00), /* ASW slew rate */
- CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
- CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
- CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
- CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
- CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
- CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
- CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
- CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
- CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
- CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
- CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
- CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
- CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
- static int last_nparam = -1;
-
- /* check if it is necessary to re-config SSP */
- if (nparam == last_nparam)
- return;
-
- ssp_disable(dev);
- ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
- last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
- static int ssp_initialized;
- static struct ssp_dev ssp2;
-
- int i;
-
- if (!ssp_initialized) {
- ssp_init(&ssp2, 2, SSP_NO_IRQ);
- ssp_initialized = 1;
- }
-
- clk_enable(ssp2.ssp->clk);
- for (i = 0; i < num; i++, cmd++) {
- ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
- ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
- /* FIXME: ssp_flush() is mandatory here to work */
- ssp_flush(&ssp2);
- }
- clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
- if (on) {
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
- if (var->xres > 240) {
- /* VGA */
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
- } else {
- /* QVGA */
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
- }
- } else
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
[0] = {
/* VGA */
@@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
.modes = tpo_tdo24mtea1_modes,
.num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
- .pxafb_lcd_power = littleton_lcd_power,
};
static void littleton_init_lcd(void)
@@ -323,6 +170,51 @@ static void littleton_init_lcd(void)
static inline void littleton_init_lcd(void) {};
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+ .num_chipselect = 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+ gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .cs_control = littleton_tdo24m_cs,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .controller_data= &littleton_tdo24m_chip,
+ },
+};
+
+static void __init littleton_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+ if (err) {
+ pr_warning("failed to request GPIO for LCS CS\n");
+ return;
+ }
+
+ gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+ pxa2xx_set_spi_info(2, &littleton_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int littleton_matrix_key_map[] = {
/* KEY(row, col, key_code) */
@@ -433,6 +325,7 @@ static void __init littleton_init(void)
*/
platform_device_register(&smc91x_device);
+ littleton_init_spi();
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index b7038948d1d..de3f67daaac 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -40,7 +40,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -51,6 +51,43 @@
#include "generic.h"
#include "devices.h"
+static unsigned long lpd270_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* Mainboard Flash */
+ GPIO78_nCS_2, /* CPLD + Ethernet */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO16_PWM0_OUT, /* Backlight */
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* AC97 */
+ GPIO45_AC97_SYSCLK,
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
static unsigned int lpd270_irq_enabled;
@@ -88,8 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
if (likely(pending)) {
irq = LPD270_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
pending = __raw_readw(LPD270_INT_STATUS) &
lpd270_irq_enabled;
@@ -265,8 +301,8 @@ static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
static struct pxafb_mach_info sharp_lq057q3dc02 = {
.modes = &sharp_lq057q3dc02_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 12.1" TFT SVGA (LoLo display number 2) */
@@ -287,8 +323,8 @@ static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
static struct pxafb_mach_info sharp_lq121s1dg31 = {
.modes = &sharp_lq121s1dg31_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 3.6" TFT QVGA (LoLo display number 3) */
@@ -309,8 +345,8 @@ static struct pxafb_mode_info sharp_lq036q1da01_mode = {
static struct pxafb_mach_info sharp_lq036q1da01 = {
.modes = &sharp_lq036q1da01_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 6.4" TFT VGA (LoLo display number 5) */
@@ -331,8 +367,8 @@ static struct pxafb_mode_info sharp_lq64d343_mode = {
static struct pxafb_mach_info sharp_lq64d343 = {
.modes = &sharp_lq64d343_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 10.4" TFT VGA (LoLo display number 7) */
@@ -353,8 +389,8 @@ static struct pxafb_mode_info sharp_lq10d368_mode = {
static struct pxafb_mach_info sharp_lq10d368 = {
.modes = &sharp_lq10d368_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 3.5" TFT QVGA (LoLo display number 8) */
@@ -375,8 +411,8 @@ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
static struct pxafb_mach_info sharp_lq035q7db02_20 = {
.modes = &sharp_lq035q7db02_20_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -411,27 +447,15 @@ static struct platform_device *platform_devices[] __initdata = {
&lpd270_flash_device[1],
};
-static int lpd270_ohci_init(struct device *dev)
-{
- /* setup Port1 GPIO pin. */
- pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
- pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data lpd270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = lpd270_ohci_init,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static void __init lpd270_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
@@ -442,12 +466,6 @@ static void __init lpd270_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
- /*
- * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
- */
- pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
- pxa_gpio_mode(GPIO16_PWM0_MD);
-
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
@@ -473,15 +491,6 @@ static void __init lpd270_map_io(void)
pxa_map_io();
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
- /* initialize sleep mode regs (wake-up sources, etc) */
- PGSR0 = 0x00008800;
- PGSR1 = 0x00000002;
- PGSR2 = 0x0001FC00;
- PGSR3 = 0x00001F81;
- PWER = 0xC0000002;
- PRER = 0x00000002;
- PFER = 0x00000002;
-
/* for use I SRAM as framebuffer. */
PSLR |= 0x00000F04;
PCFR = 0x00000066;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 4ffdff2d9ff..bff704354c1 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -57,13 +57,36 @@
static unsigned long lubbock_pin_config[] __initdata = {
GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
GPIO79_nCS_3, /* CS3 - SMC ethernet */
+ GPIO80_nCS_4, /* CS4 - SA1111 */
/* SSP data pins */
GPIO23_SSP1_SCLK,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
+ /* LCD - 16bpp DSTN */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
@@ -132,8 +155,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
GEDR(0) = GPIO_bit(0); /* clear our parent irq */
if (likely(pending)) {
irq = LUBBOCK_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
} while (pending);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 143f28adaf9..519138bc5f8 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -409,7 +409,7 @@ static struct platform_device backlight = {
* LEDs
*/
-struct gpio_led gpio_leds[] = {
+static struct gpio_led gpio_leds[] = {
{
.name = "magician::vibra",
.default_trigger = "none",
@@ -669,18 +669,10 @@ static struct pxamci_platform_data magician_mci_info = {
* USB OHCI
*/
-static int magician_ohci_init(struct device *dev)
-{
- UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data magician_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .init = magician_ohci_init,
- .power_budget = 0,
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+ .power_budget = 0,
};
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d44af761564..f2c7ad8f2b6 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -162,8 +162,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
if (likely(pending)) {
irq = MAINSTONE_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = MST_INTSETCLR & mainstone_irq_enabled;
} while (pending);
@@ -508,19 +507,9 @@ static struct platform_device *platform_devices[] __initdata = {
&mst_gpio_keys_device,
};
-static int mainstone_ohci_init(struct device *dev)
-{
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = mainstone_ohci_init,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 925575f10ac..2061c00c8ea 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -25,7 +25,12 @@
#include "generic.h"
-#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3)
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#define PGSR(x) __REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x) __GAFR(0, x)
+#define GAFR_U(x) __GAFR(1, x)
#define PWER_WE35 (1 << 24)
@@ -38,49 +43,59 @@ struct gpio_desc {
};
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+static int gpio_nr;
-static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
-{
- unsigned mask = GPIO_bit(gpio);
-
- /* low power state */
- switch (lpm) {
- case MFP_LPM_DRIVE_HIGH:
- PGSR(gpio) |= mask;
- break;
- case MFP_LPM_DRIVE_LOW:
- PGSR(gpio) &= ~mask;
- break;
- case MFP_LPM_INPUT:
- break;
- default:
- pr_warning("%s: invalid low power state for GPIO%d\n",
- __func__, gpio);
- return -EINVAL;
- }
- return 0;
-}
+static unsigned long gpdr_lpm[4];
static int __mfp_config_gpio(unsigned gpio, unsigned long c)
{
unsigned long gafr, mask = GPIO_bit(gpio);
- int fn;
+ int bank = gpio_to_bank(gpio);
+ int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+ int shft = (gpio & 0xf) << 1;
+ int fn = MFP_AF(c);
+ int dir = c & MFP_DIR_OUT;
- fn = MFP_AF(c);
if (fn > 3)
return -EINVAL;
- /* alternate function and direction */
- gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
- GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2));
+ /* alternate function and direction at run-time */
+ gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+ gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
- if (c & MFP_DIR_OUT)
+ if (uorl == 0)
+ GAFR_L(bank) = gafr;
+ else
+ GAFR_U(bank) = gafr;
+
+ if (dir == MFP_DIR_OUT)
GPDR(gpio) |= mask;
else
GPDR(gpio) &= ~mask;
- if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
- return -EINVAL;
+ /* alternate function and direction at low power mode */
+ switch (c & MFP_LPM_STATE_MASK) {
+ case MFP_LPM_DRIVE_HIGH:
+ PGSR(bank) |= mask;
+ dir = MFP_DIR_OUT;
+ break;
+ case MFP_LPM_DRIVE_LOW:
+ PGSR(bank) &= ~mask;
+ dir = MFP_DIR_OUT;
+ break;
+ case MFP_LPM_DEFAULT:
+ break;
+ default:
+ /* warning and fall through, treat as MFP_LPM_DEFAULT */
+ pr_warning("%s: GPIO%d: unsupported low power mode\n",
+ __func__, gpio);
+ break;
+ }
+
+ if (dir == MFP_DIR_OUT)
+ gpdr_lpm[bank] |= mask;
+ else
+ gpdr_lpm[bank] &= ~mask;
/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
* configurations of those pins not able to wakeup
@@ -91,7 +106,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
return -EINVAL;
}
- if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
+ if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio);
return -EINVAL;
@@ -135,7 +150,7 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
{
- unsigned long flags;
+ unsigned long flags, c;
int gpio;
gpio = __mfp_validate(mfp);
@@ -143,7 +158,11 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
return;
local_irq_save(flags);
- __mfp_config_lpm(gpio, lpm);
+
+ c = gpio_desc[gpio].config;
+ c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+ __mfp_config_gpio(gpio, c);
+
local_irq_restore(flags);
}
@@ -187,23 +206,22 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
}
#ifdef CONFIG_PXA25x
-static int __init pxa25x_mfp_init(void)
+static void __init pxa25x_mfp_init(void)
{
int i;
- if (cpu_is_pxa25x()) {
- for (i = 0; i <= 84; i++)
- gpio_desc[i].valid = 1;
+ for (i = 0; i <= 84; i++)
+ gpio_desc[i].valid = 1;
- for (i = 0; i <= 15; i++) {
- gpio_desc[i].can_wakeup = 1;
- gpio_desc[i].mask = GPIO_bit(i);
- }
+ for (i = 0; i <= 15; i++) {
+ gpio_desc[i].can_wakeup = 1;
+ gpio_desc[i].mask = GPIO_bit(i);
}
- return 0;
+ gpio_nr = 85;
}
-postcore_initcall(pxa25x_mfp_init);
+#else
+static inline void pxa25x_mfp_init(void) {}
#endif /* CONFIG_PXA25x */
#ifdef CONFIG_PXA27x
@@ -233,45 +251,106 @@ int keypad_set_wake(unsigned int on)
return 0;
}
-static int __init pxa27x_mfp_init(void)
+static void __init pxa27x_mfp_init(void)
{
int i, gpio;
- if (cpu_is_pxa27x()) {
- for (i = 0; i <= 120; i++) {
- /* skip GPIO2, 5, 6, 7, 8, they are not
- * valid pins allow configuration
- */
- if (i == 2 || i == 5 || i == 6 ||
- i == 7 || i == 8)
- continue;
+ for (i = 0; i <= 120; i++) {
+ /* skip GPIO2, 5, 6, 7, 8, they are not
+ * valid pins allow configuration
+ */
+ if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+ continue;
- gpio_desc[i].valid = 1;
- }
+ gpio_desc[i].valid = 1;
+ }
- /* Keypad GPIOs */
- for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
- gpio = pxa27x_pkwr_gpio[i];
- gpio_desc[gpio].can_wakeup = 1;
- gpio_desc[gpio].keypad_gpio = 1;
- gpio_desc[gpio].mask = 1 << i;
- }
+ /* Keypad GPIOs */
+ for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+ gpio = pxa27x_pkwr_gpio[i];
+ gpio_desc[gpio].can_wakeup = 1;
+ gpio_desc[gpio].keypad_gpio = 1;
+ gpio_desc[gpio].mask = 1 << i;
+ }
- /* Overwrite GPIO13 as a PWER wakeup source */
- for (i = 0; i <= 15; i++) {
- /* skip GPIO2, 5, 6, 7, 8 */
- if (GPIO_bit(i) & 0x1e4)
- continue;
+ /* Overwrite GPIO13 as a PWER wakeup source */
+ for (i = 0; i <= 15; i++) {
+ /* skip GPIO2, 5, 6, 7, 8 */
+ if (GPIO_bit(i) & 0x1e4)
+ continue;
- gpio_desc[i].can_wakeup = 1;
- gpio_desc[i].mask = GPIO_bit(i);
- }
+ gpio_desc[i].can_wakeup = 1;
+ gpio_desc[i].mask = GPIO_bit(i);
+ }
+
+ gpio_desc[35].can_wakeup = 1;
+ gpio_desc[35].mask = PWER_WE35;
+
+ gpio_nr = 121;
+}
+#else
+static inline void pxa27x_mfp_init(void) {}
+#endif /* CONFIG_PXA27x */
+
+#ifdef CONFIG_PM
+static unsigned long saved_gafr[2][4];
+static unsigned long saved_gpdr[4];
- gpio_desc[35].can_wakeup = 1;
- gpio_desc[35].mask = PWER_WE35;
+static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+
+ saved_gafr[0][i] = GAFR_L(i);
+ saved_gafr[1][i] = GAFR_U(i);
+ saved_gpdr[i] = GPDR(i * 32);
+
+ GPDR(i * 32) = gpdr_lpm[i];
}
+ return 0;
+}
+static int pxa2xx_mfp_resume(struct sys_device *d)
+{
+ int i;
+
+ for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+ GAFR_L(i) = saved_gafr[0][i];
+ GAFR_U(i) = saved_gafr[1][i];
+ GPDR(i * 32) = saved_gpdr[i];
+ }
+ PSSR = PSSR_RDH | PSSR_PH;
return 0;
}
-postcore_initcall(pxa27x_mfp_init);
-#endif /* CONFIG_PXA27x */
+#else
+#define pxa2xx_mfp_suspend NULL
+#define pxa2xx_mfp_resume NULL
+#endif
+
+struct sysdev_class pxa2xx_mfp_sysclass = {
+ .name = "mfp",
+ .suspend = pxa2xx_mfp_suspend,
+ .resume = pxa2xx_mfp_resume,
+};
+
+static int __init pxa2xx_mfp_init(void)
+{
+ int i;
+
+ if (!cpu_is_pxa2xx())
+ return 0;
+
+ if (cpu_is_pxa25x())
+ pxa25x_mfp_init();
+
+ if (cpu_is_pxa27x())
+ pxa27x_mfp_init();
+
+ /* initialize gafr_run[], pgsr_lpm[] from existing values */
+ for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+ gpdr_lpm[i] = GPDR(i * 32);
+
+ return sysdev_class_register(&pxa2xx_mfp_sysclass);
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
new file mode 100644
index 00000000000..0842c531ee4
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -0,0 +1,905 @@
+/*
+ * Handles the Mitac Mio A701 Board
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/rtc.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
+#include <mach/mioa701.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mioa701_pin_config[] = {
+ /* Mio global */
+ MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+ MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+
+ /* Backlight PWM 0 */
+ GPIO16_PWM0_OUT,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+ MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+ MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+ /* USB */
+ MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+ MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* Bluetooth */
+ GPIO44_BTUART_CTS,
+ GPIO42_BTUART_RXD,
+ GPIO45_BTUART_RTS,
+ GPIO43_BTUART_TXD,
+ MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+
+ /* GPS */
+ MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* GSM */
+ MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+ MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* Sound */
+ GPIO89_AC97_SYSCLK,
+ MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+ /* Leds */
+ MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+ /* Keyboard */
+ MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+ MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+ MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* Unknown */
+ MFP_CFG_IN(GPIO14, AF0),
+ MFP_CFG_IN(GPIO20, AF0),
+ MFP_CFG_IN(GPIO21, AF0),
+ MFP_CFG_IN(GPIO33, AF0),
+ MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
+ MFP_CFG_IN(GPIO80, AF0),
+ MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
+ MFP_CFG_IN(GPIO96, AF0),
+ MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+#define MIO_GPIO_IN(num, _desc) \
+ { .gpio = (num), .dir = 0, .desc = (_desc) }
+#define MIO_GPIO_OUT(num, _init, _desc) \
+ { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+ unsigned gpio : 8;
+ unsigned dir : 1;
+ unsigned init : 1;
+ char *desc;
+};
+
+static int mio_gpio_request(struct gpio_ress *gpios, int size)
+{
+ int i, rc = 0;
+ int gpio;
+ int dir;
+
+ for (i = 0; (!rc) && (i < size); i++) {
+ gpio = gpios[i].gpio;
+ dir = gpios[i].dir;
+ rc = gpio_request(gpio, gpios[i].desc);
+ if (rc) {
+ printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
+ gpio, gpios[i].desc, rc);
+ continue;
+ }
+ if (dir)
+ gpio_direction_output(gpio, gpios[i].init);
+ else
+ gpio_direction_input(gpio);
+ }
+ while ((rc) && (--i >= 0))
+ gpio_free(gpios[i].gpio);
+ return rc;
+}
+
+static void mio_gpio_free(struct gpio_ress *gpios, int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ gpio_free(gpios[i].gpio);
+}
+
+/* LCD Screen and Backlight */
+static struct platform_pwm_backlight_data mioa701_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 50,
+ .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
+};
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ * - the LTM0305A776C datasheet,
+ * - and the PXA27x Programmers' manual
+ */
+static struct pxafb_mode_info mioa701_ltm0305a776c = {
+ .pixclock = 220000, /* CLK=4.545 MHz */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 4,
+ .upper_margin = 5,
+ .lower_margin = 3,
+};
+
+static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static struct pxafb_mach_info mioa701_pxafb_info = {
+ .modes = &mioa701_ltm0305a776c,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = mioa701_lcd_power,
+};
+
+/*
+ * Keyboard configuration
+ */
+static unsigned int mioa701_matrix_keys[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_MEDIA),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_ENTER),
+ KEY(1, 2, KEY_CONNECT), /* GPS key */
+ KEY(2, 0, KEY_LEFT),
+ KEY(2, 1, KEY_PHONE), /* Phone Green key */
+ KEY(2, 2, KEY_CAMERA) /* Camera key */
+};
+static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 3,
+ .matrix_key_map = mioa701_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+};
+
+/*
+ * GPIO Key Configuration
+ */
+#define MIO_KEY(key, _gpio, _desc, _wakeup) \
+ { .code = (key), .gpio = (_gpio), .active_low = 0, \
+ .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
+static struct gpio_keys_button mioa701_button_table[] = {
+ MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
+ MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
+ MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
+ MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
+};
+
+static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
+ .buttons = mioa701_button_table,
+ .nbuttons = ARRAY_SIZE(mioa701_button_table),
+};
+
+/*
+ * Leds and vibrator
+ */
+#define ONE_LED(_gpio, _name) \
+{ .gpio = (_gpio), .name = (_name), .active_low = true }
+static struct gpio_led gpio_leds[] = {
+ ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
+ ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
+ ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
+ ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
+ ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+/*
+ * GSM Sagem XS200 chip
+ *
+ * GSM handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
+ * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
+ * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
+ * GPIO24_GSM_MOD_RESET_CMD = 0
+ * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
+ * GPIO88_GSM_nMOD_ON_CMD = 1
+ * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
+ * GPIO90_GSM_nMOD_OFF_CMD = 1
+ */
+static int is_gsm_on(void)
+{
+ int is_on;
+
+ is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
+ return is_on;
+}
+
+irqreturn_t gsm_on_irq(int irq, void *p)
+{
+ printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
+ is_gsm_on() ? "on" : "off");
+ return IRQ_HANDLED;
+}
+
+struct gpio_ress gsm_gpios[] = {
+ MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
+ MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+};
+
+static int __init gsm_init(void)
+{
+ int rc;
+
+ rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+ if (rc)
+ goto err_gpio;
+ rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "GSM XS200 Power Irq", NULL);
+ if (rc)
+ goto err_irq;
+
+ gpio_set_wake(GPIO113_GSM_EVENT, 1);
+ return 0;
+
+err_irq:
+ printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
+ mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+err_gpio:
+ printk(KERN_ERR "Mioa701: gsm not available\n");
+ return rc;
+}
+
+static void gsm_exit(void)
+{
+ free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+ mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+}
+
+/*
+ * Bluetooth BRF6150 chip
+ *
+ * BT handling was purged from kernel. For history, this is the way to go :
+ * - turn on : GPIO83_BT_ON = 1
+ * - turn off : GPIO83_BT_ON = 0
+ */
+
+/*
+ * GPS Sirf Star III chip
+ *
+ * GPS handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
+ * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
+ * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ */
+
+/*
+ * USB UDC
+ */
+static void udc_power_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ gpio_set_value(GPIO22_USB_ENABLE, 0);
+ break;
+ case PXA2XX_UDC_CMD_CONNECT:
+ gpio_set_value(GPIO22_USB_ENABLE, 1);
+ break;
+ default:
+ printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
+ break;
+ }
+}
+
+static int is_usb_connected(void)
+{
+ return !!gpio_get_value(GPIO13_USB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+ .udc_is_connected = is_usb_connected,
+ .udc_command = udc_power_command,
+};
+
+struct gpio_ress udc_gpios[] = {
+ MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+};
+
+static int __init udc_init(void)
+{
+ pxa_set_udc_info(&mioa701_udc_info);
+ return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
+}
+
+static void udc_exit(void)
+{
+ mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
+}
+
+/*
+ * SDIO/MMC Card controller
+ */
+static void mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask)
+ gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */
+ else
+ gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */
+}
+
+static int mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO78_SDIO_RO);
+}
+
+struct gpio_ress mci_gpios[] = {
+ MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"),
+ MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"),
+ MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable")
+};
+
+static void mci_exit(struct device *dev, void *data)
+{
+ mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+ free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
+}
+
+static struct pxamci_platform_data mioa701_mci_info;
+
+/**
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
+{
+ int rc;
+ int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
+
+ rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
+ if (rc)
+ goto err_gpio;
+ /* enable RE/FE interrupt on card insertion and removal */
+ rc = request_irq(irq, detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (rc)
+ goto err_irq;
+
+ mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
+ return 0;
+
+err_irq:
+ dev_err(dev, "mioa701_mci_init: MMC/SD:"
+ " can't request MMC card detect IRQ\n");
+ mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+err_gpio:
+ return rc;
+}
+
+static struct pxamci_platform_data mioa701_mci_info = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = mci_init,
+ .get_ro = mci_get_ro,
+ .setpower = mci_setpower,
+ .exit = mci_exit,
+};
+
+/* FlashRAM */
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 2,
+ /* .set_vpp = mioa701_set_vpp, */
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * Suspend/Resume bootstrap management
+ *
+ * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * this sequence is as follows :
+ * - disables interrupts
+ * - initialize SDRAM (self refresh RAM into active RAM)
+ * - initialize GPIOs (depends on value at 0xa020b020)
+ * - initialize coprossessors
+ * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
+ * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
+ * - else do a resume, ie. jump to addr 0xa0100000
+ */
+#define RESUME_ENABLE_ADDR 0xa020b000
+#define RESUME_ENABLE_VAL 0x0f0f0f0f
+#define RESUME_BT_ADDR 0xa020b020
+#define RESUME_UNKNOWN_ADDR 0xa020b024
+#define RESUME_VECTOR_ADDR 0xa0100000
+#define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4
+
+static u32 *save_buffer;
+
+static void install_bootstrap(void)
+{
+ int i;
+ u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *src = &mioa701_bootstrap;
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ rom_bootstrap[i] = src[i];
+}
+
+
+static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ int i = 0, is_bt_on;
+ u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+ u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
+ u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+ /* Devices prepare suspend */
+ is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
+ is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ save_buffer[i] = mem_resume_vector[i];
+ save_buffer[i++] = *mem_resume_enabler;
+ save_buffer[i++] = *mem_resume_bt;
+ save_buffer[i++] = *mem_resume_unknown;
+
+ *mem_resume_enabler = RESUME_ENABLE_VAL;
+ *mem_resume_bt = is_bt_on;
+
+ install_bootstrap();
+ return 0;
+}
+
+static int mioa701_sys_resume(struct sys_device *sysdev)
+{
+ int i = 0;
+ u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+ u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
+ u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ mem_resume_vector[i] = save_buffer[i];
+ *mem_resume_enabler = save_buffer[i++];
+ *mem_resume_bt = save_buffer[i++];
+ *mem_resume_unknown = save_buffer[i++];
+
+ return 0;
+}
+
+static struct sysdev_class mioa701_sysclass = {
+ .name = "mioa701",
+};
+
+static struct sys_device sysdev_bootstrap = {
+ .cls = &mioa701_sysclass,
+};
+
+static struct sysdev_driver driver_bootstrap = {
+ .suspend = &mioa701_sys_suspend,
+ .resume = &mioa701_sys_resume,
+};
+
+static int __init bootstrap_init(void)
+{
+ int rc;
+ int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
+
+ rc = sysdev_class_register(&mioa701_sysclass);
+ if (rc) {
+ printk(KERN_ERR "Failed registering mioa701 sys class\n");
+ return -ENODEV;
+ }
+ rc = sysdev_register(&sysdev_bootstrap);
+ if (rc) {
+ printk(KERN_ERR "Failed registering mioa701 sys device\n");
+ return -ENODEV;
+ }
+ rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
+ if (rc) {
+ printk(KERN_ERR "Failed registering PMU sys driver\n");
+ return -ENODEV;
+ }
+
+ save_buffer = kmalloc(save_size, GFP_KERNEL);
+ if (!save_buffer)
+ return -ENOMEM;
+ printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
+ save_size);
+ return 0;
+}
+
+static void bootstrap_exit(void)
+{
+ kfree(save_buffer);
+ sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
+ sysdev_unregister(&sysdev_bootstrap);
+ sysdev_class_unregister(&mioa701_sysclass);
+
+ printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
+ "resume !!!\n");
+}
+
+/*
+ * Power Supply
+ */
+static char *supplicants[] = {
+ "mioa701_battery"
+};
+
+static void mioa701_set_charge(int flags)
+{
+ gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+}
+
+static struct pda_power_pdata power_pdata = {
+ .is_ac_online = is_usb_connected,
+ .set_charge = mioa701_set_charge,
+ .supplied_to = supplicants,
+ .num_supplicants = ARRAY_SIZE(supplicants),
+};
+
+static struct resource power_resources[] = {
+ [0] = {
+ .name = "ac",
+ .start = gpio_to_irq(GPIO13_USB_DETECT),
+ .end = gpio_to_irq(GPIO13_USB_DETECT),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device power_dev = {
+ .name = "pda-power",
+ .id = -1,
+ .resource = power_resources,
+ .num_resources = ARRAY_SIZE(power_resources),
+ .dev = {
+ .platform_data = &power_pdata,
+ },
+};
+
+#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
+static struct wm97xx *battery_wm;
+
+static enum power_supply_property battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, /* Necessary for apm */
+};
+
+static int get_battery_voltage(void)
+{
+ int adc = -1;
+
+ if (battery_wm)
+ adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
+ return adc;
+}
+
+static int get_battery_status(struct power_supply *b)
+{
+ int status;
+
+ if (is_usb_connected())
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return status;
+}
+
+static int get_property(struct power_supply *b,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int rc = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = get_battery_status(b);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = 0xfd0;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = 0xc00;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = get_battery_voltage();
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = 100;
+ break;
+ default:
+ val->intval = -1;
+ rc = -1;
+ }
+
+ return rc;
+};
+
+static struct power_supply battery_ps = {
+ .name = "mioa701_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = get_property,
+ .properties = battery_props,
+ .num_properties = ARRAY_SIZE(battery_props),
+};
+
+static int battery_probe(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+ int rc;
+
+ battery_wm = wm;
+
+ rc = power_supply_register(NULL, &battery_ps);
+ if (rc)
+ dev_err(&pdev->dev,
+ "Could not register mioa701 battery -> %d\n", rc);
+ return rc;
+}
+
+static int battery_remove(struct platform_device *pdev)
+{
+ battery_wm = NULL;
+ return 0;
+}
+
+static struct platform_driver mioa701_battery_driver = {
+ .driver = {
+ .name = "wm97xx-battery",
+ },
+ .probe = battery_probe,
+ .remove = battery_remove
+};
+
+static int __init mioa701_battery_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&mioa701_battery_driver);
+ if (rc)
+ printk(KERN_ERR "Could not register mioa701 battery driver\n");
+ return rc;
+}
+
+#else
+static int __init mioa701_battery_init(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Mio global
+ */
+
+/* Devices */
+#define MIO_PARENT_DEV(var, strname, tparent, pdata) \
+static struct platform_device var = { \
+ .name = strname, \
+ .id = -1, \
+ .dev = { \
+ .platform_data = pdata, \
+ .parent = tparent, \
+ }, \
+};
+#define MIO_SIMPLE_DEV(var, strname, pdata) \
+ MIO_PARENT_DEV(var, strname, NULL, pdata)
+
+MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data)
+MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
+ &mioa701_backlight_data);
+MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
+MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
+MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL)
+MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
+MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
+MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+
+static struct platform_device *devices[] __initdata = {
+ &mioa701_gpio_keys,
+ &mioa701_backlight,
+ &mioa701_led,
+ &pxa2xx_pcm,
+ &pxa2xx_ac97,
+ &mio_wm9713_codec,
+ &mioa701_sound,
+ &power_dev,
+ &strataflash,
+ &mioa701_board
+};
+
+static void mioa701_machine_exit(void);
+
+static void mioa701_poweroff(void)
+{
+ mioa701_machine_exit();
+ gpio_set_value(GPIO18_POWEROFF, 1);
+}
+
+static void mioa701_restart(char c)
+{
+ mioa701_machine_exit();
+ arm_machine_restart(c);
+}
+
+struct gpio_ress global_gpios[] = {
+ MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+ MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
+ MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+};
+
+static void __init mioa701_machine_init(void)
+{
+ PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
+ PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
+ RTTR = 32768 - 1; /* Reset crazy WinCE value */
+ UP2OCR = UP2OCR_HXOE;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+ mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+ bootstrap_init();
+ set_pxa_fb_info(&mioa701_pxafb_info);
+ pxa_set_mci_info(&mioa701_mci_info);
+ pxa_set_keypad_info(&mioa701_keypad_info);
+ udc_init();
+ pm_power_off = mioa701_poweroff;
+ arm_pm_restart = mioa701_restart;
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ gsm_init();
+ mioa701_battery_init();
+}
+
+static void mioa701_machine_exit(void)
+{
+ udc_exit();
+ bootstrap_exit();
+ gsm_exit();
+}
+
+MACHINE_START(MIOA701, "MIO A701")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = &pxa_map_io,
+ .init_irq = &pxa27x_init_irq,
+ .init_machine = mioa701_machine_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
new file mode 100644
index 00000000000..a647693d985
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -0,0 +1,36 @@
+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow jumpaddr to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+ .data
+ENTRY(mioa701_bootstrap)
+0:
+ b 1f
+ENTRY(mioa701_jumpaddr)
+ .word 0x40f00008 @ PSPR in no-MMU mode
+1:
+ mov r0, #0xa0000000 @ Don't suppose memory access works
+ orr r0, r0, #0x00200000 @ even if it's supposed to
+ mov r1, #0
+ str r1, [r0] @ Early disable resume for next boot
+ ldr r0, mioa701_jumpaddr @ (Murphy's Law)
+ ldr r0, [r0]
+ mov pc, r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+ .data
+ .word 2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
new file mode 100644
index 00000000000..8a73814126b
--- /dev/null
+++ b/arch/arm/mach-pxa/mp900.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-pxa/mp900.c
+ *
+ * Support for the NEC MobilePro900/C platform
+ *
+ * Based on mach-pxa/gumstix.c
+ *
+ * 2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ * 2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/usb/isp116x.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+
+static void isp116x_pfm_delay(struct device *dev, int delay)
+{
+
+ /* 400Mhz PXA2 = 2.5ns / instruction */
+
+ int cyc = delay / 10;
+
+ /* 4 Instructions = 4 x 2.5ns = 10ns */
+ __asm__ volatile ("0:\n"
+ "subs %0, %1, #1\n"
+ "bge 0b\n"
+ :"=r" (cyc)
+ :"0"(cyc)
+ );
+}
+
+static struct isp116x_platform_data isp116x_pfm_data = {
+ .remote_wakeup_enable = 1,
+ .delay = isp116x_pfm_delay,
+};
+
+static struct resource isp116x_pfm_resources[] = {
+ [0] = {
+ .start = 0x0d000000,
+ .end = 0x0d000000 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0d000000 + 4,
+ .end = 0x0d000000 + 5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 61,
+ .end = 61,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mp900c_dummy_device = {
+ .name = "mp900c_dummy",
+ .id = -1,
+};
+
+static struct platform_device mp900c_usb = {
+ .name = "isp116x-hcd",
+ .num_resources = ARRAY_SIZE(isp116x_pfm_resources),
+ .resource = isp116x_pfm_resources,
+ .dev.platform_data = &isp116x_pfm_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mp900c_dummy_device,
+ &mp900c_usb,
+};
+
+static void __init mp900c_init(void)
+{
+ printk(KERN_INFO "MobilePro 900/C machine init\n");
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
+MACHINE_START(NEC_MP900, "MobilePro900/C")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0220100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .timer = &pxa_timer,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .init_machine = mp900c_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fe924a23deb..4447711c9fc 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,6 +25,8 @@
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -340,6 +342,23 @@ static struct platform_device power_supply = {
};
/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMTX_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMTX_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -401,6 +420,7 @@ static void __init palmtx_init(void)
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 00000000000..2f730da3bba
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,554 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ * Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ * Sergey Lapin <slapin@ossfans.org>
+ * Alex Osborne <bobofdoom@gmail.com>
+ * Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmz72.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/pm.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO115_GPIO, /* SD RO */
+ GPIO98_GPIO, /* SD power */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO49_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO12_GPIO, /* usb pullup */
+ GPIO95_GPIO, /* usb power */
+
+ /* Matrix keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO20_GPIO, /* bl power */
+ GPIO21_GPIO, /* LCD border switch */
+ GPIO22_GPIO, /* LCD border color */
+ GPIO96_GPIO, /* lcd power */
+
+ /* Misc. */
+ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */
+ GPIO88_GPIO, /* green led */
+ GPIO27_GPIO, /* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmz72_mci_init(struct device *dev,
+ irq_handler_t palmz72_detect_int, void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
+ palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ /* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
+
+ err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+ if (err)
+ goto err4;
+ err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMZ72_SD_RO);
+err4:
+ gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmz72_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+ free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+ gpio_free(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static void palmz72_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ if (p_d->ocr_mask & (1 << vdd))
+ gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+ else
+ gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
+}
+
+static int palmz72_mci_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static struct pxamci_platform_data palmz72_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmz72_mci_power,
+ .get_ro = palmz72_mci_ro,
+ .init = palmz72_mci_init,
+ .exit = palmz72_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmz72_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmz72_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmz72_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmz72_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmz72_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmz72_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+ gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmz72_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMZ72_MAX_INTENSITY,
+ .dft_brightness = PALMZ72_MAX_INTENSITY,
+ .pwm_period_ns = PALMZ72_PERIOD_NS,
+ .init = palmz72_backlight_init,
+ .notify = palmz72_backlight_notify,
+ .exit = palmz72_backlight_exit,
+};
+
+static struct platform_device palmz72_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmz72_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmz72_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmz72_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+}
+
+static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmz72_ficp_platform_data = {
+ .startup = palmz72_irda_startup,
+ .shutdown = palmz72_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = palmz72_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "palmz72:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMZ72_LED_GREEN,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+err2:
+ gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmz72_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static int palmz72_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static char *palmz72_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmz72_is_ac_online,
+ .is_usb_online = palmz72_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmz72_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmz72_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmz72_lcd_modes[] = {
+{
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmz72_lcd_screen = {
+ .modes = palmz72_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmz72_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+#ifdef CONFIG_PM
+
+/* We have some black magic here
+ * PalmOS ROM on recover expects special struct physical address
+ * to be transferred via PSPR. Using this struct PalmOS restores
+ * its state after sleep. As for Linux, we need to setup it the
+ * same way. More than that, PalmOS ROM changes some values in memory.
+ * For now only one location is found, which needs special treatment.
+ * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
+ * for reading backtraces for me :)
+ */
+
+#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
+
+static struct palmz72_resume_info palmz72_resume_info = {
+ .magic0 = 0xb4e6,
+ .magic1 = 1,
+
+ /* reset state, MMU off etc */
+ .arm_control = 0,
+ .aux_control = 0,
+ .ttb = 0,
+ .domain_access = 0,
+ .process_id = 0,
+};
+
+static unsigned long store_ptr;
+
+/* sys_device for Palm Zire 72 PM */
+
+static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+{
+ /* setup the resume_info struct for the original bootloader */
+ palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+
+ /* Storing memory touched by ROM */
+ store_ptr = *PALMZ72_SAVE_DWORD;
+
+ /* Setting PSPR to a proper value */
+ PSPR = virt_to_phys(&palmz72_resume_info);
+
+ return 0;
+}
+
+static int palmz72_pm_resume(struct sys_device *dev)
+{
+ *PALMZ72_SAVE_DWORD = store_ptr;
+ return 0;
+}
+
+static struct sysdev_class palmz72_pm_sysclass = {
+ .name = "palmz72_pm",
+ .suspend = palmz72_pm_suspend,
+ .resume = palmz72_pm_resume,
+};
+
+static struct sys_device palmz72_pm_device = {
+ .cls = &palmz72_pm_sysclass,
+};
+
+static int __init palmz72_pm_init(void)
+{
+ int ret = -ENODEV;
+ if (machine_is_palmz72()) {
+ ret = sysdev_class_register(&palmz72_pm_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&palmz72_pm_device);
+ }
+ return ret;
+}
+
+device_initcall(palmz72_pm_init);
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+ &palmz72_backlight,
+ &palmz72_leds,
+ &power_supply,
+};
+
+static void __init palmz72_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+ set_pxa_fb_info(&palmz72_lcd_screen);
+ pxa_set_mci_info(&palmz72_mci_platform_data);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmz72_ficp_platform_data);
+ pxa_set_keypad_info(&palmz72_keypad_platform_data);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+ .phys_io = 0x40000000,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmz72_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 730b9f6ede1..36135a02fdc 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -31,7 +31,7 @@
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
@@ -86,6 +86,28 @@
* *) CPU internal use only
*/
+static unsigned long pcm027_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5, /* Ethernet */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GPIO */
+ GPIO52_GPIO, /* IRQ from network controller */
+#ifdef CONFIG_LEDS_GPIO
+ GPIO90_GPIO, /* PCM027_LED_CPU */
+ GPIO91_GPIO, /* PCM027_LED_HEART_BEAT */
+#endif
+ GPIO114_GPIO, /* IRQ from CAN controller */
+};
+
/*
* SMC91x network controller specific stuff
*/
@@ -206,13 +228,9 @@ static void __init pcm027_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
- /* LEDs (on demand only) */
-#ifdef CONFIG_LEDS_GPIO
- pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
- pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
-#endif /* CONFIG_LEDS_GPIO */
+ platform_add_devices(devices, ARRAY_SIZE(devices));
/* at last call the baseboard to initialize itself */
#ifdef CONFIG_MACH_PCM990_BASEBOARD
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 420c9b3813f..f601425f1b1 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -262,8 +262,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
if (likely(pending)) {
irq = PCM027_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
} while (pending);
@@ -328,36 +327,10 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
.exit = pcm990_mci_exit,
};
-/*
- * init OHCI hardware to work with
- *
- * Note: Only USB port 1 (host only) is connected
- *
- * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
- * GPIO89 (USBHPEN#1): power-on out, on when low
- */
-static int pcm990_ohci_init(struct device *dev)
-{
- /*
- * disable USB port 2 and 3
- * power sense is active low
- */
- UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
- UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
- /*
- * wait 10ms after Power on
- * overcurrent per port
- * power switch per port
- */
- UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */
-
- return 0;
-}
-
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = pcm990_ohci_init,
- .exit = NULL,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .power_on_delay = 10,
};
/*
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 1b539e67557..164eb0bb632 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -86,9 +86,27 @@ static int pxa_pm_valid(suspend_state_t state)
return -EINVAL;
}
+static int pxa_pm_prepare(void)
+{
+ int ret = 0;
+
+ if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
+ ret = pxa_cpu_pm_fns->prepare();
+
+ return ret;
+}
+
+static void pxa_pm_finish(void)
+{
+ if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
+ pxa_cpu_pm_fns->finish();
+}
+
static struct platform_suspend_ops pxa_pm_ops = {
.valid = pxa_pm_valid,
.enter = pxa_pm_enter,
+ .prepare = pxa_pm_prepare,
+ .finish = pxa_pm_finish,
};
static int __init pxa_pm_init(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3f5f484549b..2e3bd8b1523 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,6 +20,9 @@
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -33,7 +36,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
@@ -42,6 +45,7 @@
#include <mach/pxafb.h>
#include <mach/sharpsl.h>
#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
@@ -51,6 +55,88 @@
#include "devices.h"
#include "sharpsl.h"
+static unsigned long poodle_pin_config[] __initdata = {
+ /* I/O */
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO18_RDY,
+
+ /* Clock */
+ GPIO12_32KHz,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+
+ /* Infra-Red */
+ GPIO47_FICP_TXD,
+ GPIO46_FICP_RXD,
+
+ /* FFUART */
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+ GPIO39_FFUART_TXD,
+ GPIO37_FFUART_DSR,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* GPIO */
+ GPIO9_GPIO, /* POODLE_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* POODLE_GPIO_nSD_WP */
+ GPIO3_GPIO, /* POODLE_GPIO_SD_PWR */
+ GPIO33_GPIO, /* POODLE_GPIO_SD_PWR1 */
+
+ GPIO20_GPIO, /* POODLE_GPIO_USB_PULLUP */
+ GPIO22_GPIO, /* POODLE_GPIO_IR_ON */
+};
+
static struct resource poodle_scoop_resources[] = {
[0] = {
.start = 0x10800000,
@@ -62,6 +148,7 @@ static struct resource poodle_scoop_resources[] = {
static struct scoop_config poodle_scoop_setup = {
.io_dir = POODLE_SCOOP_IO_DIR,
.io_out = POODLE_SCOOP_IO_OUT,
+ .gpio_base = POODLE_SCOOP_GPIO_BASE,
};
struct platform_device poodle_scoop_device = {
@@ -74,27 +161,6 @@ struct platform_device poodle_scoop_device = {
.resource = poodle_scoop_resources,
};
-static void poodle_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
.dev = &poodle_scoop_device.dev,
@@ -107,7 +173,6 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
static struct scoop_pcmcia_config poodle_pcmcia_config = {
.devs = &poodle_pcmcia_scoop[0],
.num_devs = 1,
- .pcmcia_init = poodle_pcmcia_init,
};
EXPORT_SYMBOL(poodle_scoop_device);
@@ -136,62 +201,55 @@ struct platform_device poodle_locomo_device = {
EXPORT_SYMBOL(poodle_locomo_device);
-/*
- * Poodle SSP Device
- */
-
-struct platform_device poodle_ssp_device = {
- .name = "corgi-ssp",
- .id = -1,
-};
-
-struct corgissp_machinfo poodle_ssp_machinfo = {
- .port = 1,
- .cs_lcdcon = -1,
- .cs_ads7846 = -1,
- .cs_max1111 = -1,
- .clk_lcdcon = 2,
- .clk_ads7846 = 36,
- .clk_max1111 = 2,
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master poodle_spi_info = {
+ .num_chipselect = 1,
};
-
-/*
- * Poodle Touch Screen Device
- */
-static struct resource poodlets_resources[] = {
- [0] = {
- .start = POODLE_IRQ_GPIO_TP_INT,
- .end = POODLE_IRQ_GPIO_TP_INT,
- .flags = IORESOURCE_IRQ,
- },
+static struct ads7846_platform_data poodle_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = POODLE_GPIO_TP_INT,
};
-static unsigned long poodle_get_hsync_invperiod(void)
+static void ads7846_cs(u32 command)
{
- return 0;
+ gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
}
-static void poodle_null_hsync(void)
-{
-}
-
-static struct corgits_machinfo poodle_ts_machinfo = {
- .get_hsync_invperiod = poodle_get_hsync_invperiod,
- .put_hsync = poodle_null_hsync,
- .wait_hsync = poodle_null_hsync,
+static struct pxa2xx_spi_chip poodle_ads7846_chip = {
+ .cs_control = ads7846_cs,
};
-static struct platform_device poodle_ts_device = {
- .name = "corgi-ts",
- .dev = {
- .platform_data = &poodle_ts_machinfo,
+static struct spi_board_info poodle_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 10000,
+ .bus_num = 1,
+ .platform_data = &poodle_ads7846_info,
+ .controller_data= &poodle_ads7846_chip,
+ .irq = gpio_to_irq(POODLE_GPIO_TP_INT),
},
- .id = -1,
- .num_resources = ARRAY_SIZE(poodlets_resources),
- .resource = poodlets_resources,
};
+static void __init poodle_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ gpio_direction_output(POODLE_GPIO_TP_CS, 1);
+
+ pxa2xx_set_spi_info(1, &poodle_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
/*
* MMC/SD Device
@@ -205,22 +263,50 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
{
int err;
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
- pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
- pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
- pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
- pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
+ err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
+ if (err)
+ goto err_out;
+
+ err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+ if (err)
+ goto err_free_2;
+
+ err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+ if (err)
+ goto err_free_3;
+
+ gpio_direction_input(POODLE_GPIO_nSD_DETECT);
+ gpio_direction_input(POODLE_GPIO_nSD_WP);
+
+ gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+ gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err)
- printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ if (err) {
+ pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+ __func__);
+ goto err_free_4;
+ }
+
+ return 0;
+err_free_4:
+ gpio_free(POODLE_GPIO_SD_PWR1);
+err_free_3:
+ gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+ gpio_free(POODLE_GPIO_nSD_WP);
+err_free_1:
+ gpio_free(POODLE_GPIO_nSD_DETECT);
+err_out:
return err;
}
@@ -228,18 +314,19 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask) {
- GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+ if ((1 << vdd) & p_d->ocr_mask) {
+ gpio_set_value(POODLE_GPIO_SD_PWR, 1);
mdelay(2);
- GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+ gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
} else {
- GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
- GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+ gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+ gpio_set_value(POODLE_GPIO_SD_PWR, 0);
}
}
static int poodle_mci_get_ro(struct device *dev)
{
+ return !!gpio_get_value(POODLE_GPIO_nSD_WP);
return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
}
@@ -247,6 +334,10 @@ static int poodle_mci_get_ro(struct device *dev)
static void poodle_mci_exit(struct device *dev, void *data)
{
free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(POODLE_GPIO_SD_PWR1);
+ gpio_free(POODLE_GPIO_SD_PWR);
+ gpio_free(POODLE_GPIO_nSD_WP);
+ gpio_free(POODLE_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data poodle_mci_platform_data = {
@@ -263,38 +354,41 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
*/
static void poodle_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF) {
- GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
- } else {
- GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
- }
+ gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
+static int poodle_irda_startup(struct device *dev)
+{
+ int err;
+
+ err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
+ if (err)
+ return err;
+
+ gpio_direction_output(POODLE_GPIO_IR_ON, 1);
+ return 0;
+}
+
+static void poodle_irda_shutdown(struct device *dev)
+{
+ gpio_free(POODLE_GPIO_IR_ON);
+}
+
static struct pxaficp_platform_data poodle_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = poodle_irda_transceiver_mode,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = poodle_irda_transceiver_mode,
+ .startup = poodle_irda_startup,
+ .shutdown = poodle_irda_shutdown,
};
/*
* USB Device Controller
*/
-static void poodle_udc_command(int cmd)
-{
- switch(cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
- break;
- }
-}
-
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; poodle can't tell connection status */
- .udc_command = poodle_udc_command,
+ .gpio_pullup = POODLE_GPIO_USB_PULLUP,
};
@@ -316,15 +410,12 @@ static struct pxafb_mode_info poodle_fb_mode = {
static struct pxafb_mach_info poodle_fb_info = {
.modes = &poodle_fb_mode,
.num_modes = 1,
- .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
- .lccr3 = 0,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
};
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
- &poodle_ssp_device,
- &poodle_ts_device,
};
static void poodle_poweroff(void)
@@ -344,59 +435,23 @@ static void __init poodle_init(void)
pm_power_off = poodle_poweroff;
arm_pm_restart = poodle_restart;
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x00008000;
- PGSR1 = 0x003F0202;
- PGSR2 = 0x0001C000;
PCFR |= PCFR_OPDE;
- /* cpu initialize */
- /* Pgsr Register */
- PGSR0 = 0x0146dd80;
- PGSR1 = 0x03bf0890;
- PGSR2 = 0x0001c000;
-
- /* Alternate Register */
- GAFR0_L = 0x01001000;
- GAFR0_U = 0x591a8010;
- GAFR1_L = 0x900a8451;
- GAFR1_U = 0xaaa5aaaa;
- GAFR2_L = 0x8aaaaaaa;
- GAFR2_U = 0x00000002;
-
- /* Direction Register */
- GPDR0 = 0xd3f0904c;
- GPDR1 = 0xfcffb7d3;
- GPDR2 = 0x0001ffff;
-
- /* Output Register */
- GPCR0 = 0x00000000;
- GPCR1 = 0x00000000;
- GPCR2 = 0x00000000;
-
- GPSR0 = 0x00400000;
- GPSR1 = 0x00000000;
- GPSR2 = 0x00000000;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+ platform_scoop_config = &poodle_pcmcia_config;
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ pr_warning("poodle: Unable to register LoCoMo device\n");
set_pxa_fb_parent(&poodle_locomo_device.dev);
set_pxa_fb_info(&poodle_fb_info);
- pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
- pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
-
- platform_scoop_config = &poodle_pcmcia_config;
-
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- if (ret) {
- printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
- }
- corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
+ poodle_init_spi();
}
static void __init fixup_poodle(struct machine_desc *desc,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 305452b56e9..25d17a1dab7 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -36,6 +36,12 @@
#include "devices.h"
#include "clock.h"
+int cpu_is_pxa26x(void)
+{
+ return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
+}
+EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
+
/*
* Various clock factors driven by the CCCR register.
*/
@@ -203,48 +209,21 @@ static struct clk pxa25x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
-
- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-
+enum {
SLEEP_SAVE_PSTR,
-
SLEEP_SAVE_CKEN,
-
SLEEP_SAVE_COUNT
};
static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
- SAVE(GAFR0_L); SAVE(GAFR0_U);
- SAVE(GAFR1_L); SAVE(GAFR1_U);
- SAVE(GAFR2_L); SAVE(GAFR2_U);
-
SAVE(CKEN);
SAVE(PSTR);
-
- /* Clear GPIO transition detect bits */
- GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
}
static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
- /* ensure not to come back here if it wasn't intended */
- PSPR = 0;
-
- /* restore registers */
- RESTORE(GAFR0_L); RESTORE(GAFR0_U);
- RESTORE(GAFR1_L); RESTORE(GAFR1_U);
- RESTORE(GAFR2_L); RESTORE(GAFR2_U);
- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
- PSSR = PSSR_RDH | PSSR_PH;
-
RESTORE(CKEN);
RESTORE(PSTR);
}
@@ -256,19 +235,32 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
pxa25x_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
+static int pxa25x_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ return 0;
+}
+
+static void pxa25x_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+}
+
static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
.save_count = SLEEP_SAVE_COUNT,
.valid = suspend_valid_only_mem,
.save = pxa25x_cpu_pm_save,
.restore = pxa25x_cpu_pm_restore,
.enter = pxa25x_cpu_pm_enter,
+ .prepare = pxa25x_cpu_pm_prepare,
+ .finish = pxa25x_cpu_pm_finish,
};
static void __init pxa25x_init_pm(void)
@@ -330,6 +322,8 @@ static struct sys_device pxa25x_sysdev[] = {
{
.cls = &pxa_irq_sysclass,
}, {
+ .cls = &pxa2xx_mfp_sysclass,
+ }, {
.cls = &pxa_gpio_sysclass,
},
};
@@ -338,11 +332,7 @@ static int __init pxa25x_init(void)
{
int i, ret = 0;
- /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- if (cpu_is_pxa255())
- clks_register(&pxa25x_hwuart_clk, 1);
-
- if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+ if (cpu_is_pxa25x()) {
reset_status = RCSR;
@@ -365,9 +355,11 @@ static int __init pxa25x_init(void)
return ret;
}
- /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- if (cpu_is_pxa255())
+ /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
+ if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+ clks_register(&pxa25x_hwuart_clk, 1);
ret = platform_device_register(&pxa_device_hwuart);
+ }
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f9f6a9c31f4..3e4ab2279c9 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -34,6 +34,13 @@
#include "devices.h"
#include "clock.h"
+void pxa27x_clear_otgph(void)
+{
+ if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
+ PSSR |= PSSR_OTGPH;
+}
+EXPORT_SYMBOL(pxa27x_clear_otgph);
+
/* Crystal clock: 13MHz */
#define BASE_CLK 13000000
@@ -183,36 +190,18 @@ static struct clk pxa27x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
- SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-
+enum {
SLEEP_SAVE_PSTR,
-
SLEEP_SAVE_CKEN,
-
SLEEP_SAVE_MDREFR,
- SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
- SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-
+ SLEEP_SAVE_PCFR,
SLEEP_SAVE_COUNT
};
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
-
- SAVE(GAFR0_L); SAVE(GAFR0_U);
- SAVE(GAFR1_L); SAVE(GAFR1_U);
- SAVE(GAFR2_L); SAVE(GAFR2_U);
- SAVE(GAFR3_L); SAVE(GAFR3_U);
-
SAVE(MDREFR);
- SAVE(PWER); SAVE(PCFR); SAVE(PRER);
- SAVE(PFER); SAVE(PKWR);
+ SAVE(PCFR);
SAVE(CKEN);
SAVE(PSTR);
@@ -220,24 +209,12 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
- /* ensure not to come back here if it wasn't intended */
- PSPR = 0;
-
- /* restore registers */
- RESTORE(GAFR0_L); RESTORE(GAFR0_U);
- RESTORE(GAFR1_L); RESTORE(GAFR1_U);
- RESTORE(GAFR2_L); RESTORE(GAFR2_U);
- RESTORE(GAFR3_L); RESTORE(GAFR3_U);
- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
-
RESTORE(MDREFR);
- RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
- RESTORE(PFER); RESTORE(PKWR);
+ RESTORE(PCFR);
PSSR = PSSR_RDH | PSSR_PH;
RESTORE(CKEN);
-
RESTORE(PSTR);
}
@@ -259,8 +236,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
pxa27x_cpu_suspend(PWRMODE_SLEEP);
break;
}
@@ -271,12 +246,27 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
}
+static int pxa27x_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ return 0;
+}
+
+static void pxa27x_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+}
+
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
.save_count = SLEEP_SAVE_COUNT,
.save = pxa27x_cpu_pm_save,
.restore = pxa27x_cpu_pm_restore,
.valid = pxa27x_cpu_pm_valid,
.enter = pxa27x_cpu_pm_enter,
+ .prepare = pxa27x_cpu_pm_prepare,
+ .finish = pxa27x_cpu_pm_finish,
};
static void __init pxa27x_init_pm(void)
@@ -349,7 +339,7 @@ struct platform_device pxa27x_device_i2c_power = {
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
-void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
local_irq_disable();
PCFR |= PCFR_PI2CEN;
@@ -376,6 +366,8 @@ static struct sys_device pxa27x_sysdev[] = {
{
.cls = &pxa_irq_sysclass,
}, {
+ .cls = &pxa2xx_mfp_sysclass,
+ }, {
.cls = &pxa_gpio_sysclass,
},
};
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 03cbc38103e..b3cd5d0b0f3 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -203,6 +203,19 @@ static const struct clkops clk_pout_ops = {
.disable = clk_pout_disable,
};
+static void clk_dummy_enable(struct clk *clk)
+{
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clk_dummy_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+};
+
static struct clk pxa3xx_clks[] = {
{
.name = "CLK_POUT",
@@ -211,6 +224,13 @@ static struct clk pxa3xx_clks[] = {
.delay = 70,
},
+ /* Power I2C clock is always on */
+ {
+ .name = "I2CCLK",
+ .ops = &clk_dummy_ops,
+ .dev = &pxa3xx_device_i2c_power.dev,
+ },
+
PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
PXA3xx_CK("AC97CLK", AC97, &clk_pxa3xx_ac97_ops, NULL),
@@ -509,6 +529,30 @@ void __init pxa3xx_init_irq(void)
* device registration specific to PXA3xx.
*/
+static struct resource i2c_power_resources[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = i2c_power_resources,
+ .num_resources = ARRAY_SIZE(i2c_power_resources),
+};
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa3xx_device_i2c_power.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
/* &pxa_device_udc, The UDC driver is PXA25x only */
&pxa_device_ffuart,
@@ -522,6 +566,7 @@ static struct platform_device *devices[] __initdata = {
&pxa3xx_device_ssp4,
&pxa27x_device_pwm0,
&pxa27x_device_pwm1,
+ &pxa3xx_device_i2c_power,
};
static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 9996c612c3d..31d78855aac 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -7,7 +7,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/proc-fns.h>
#include <mach/pxa-regs.h>
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index e804ae09370..15c2f1a8623 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -116,24 +116,20 @@ struct battery_thresh spitz_battery_levels_noac[] = {
{ 0, 0},
};
-/* MAX1111 Commands */
-#define MAXCTRL_PD0 1u << 0
-#define MAXCTRL_PD1 1u << 1
-#define MAXCTRL_SGL 1u << 2
-#define MAXCTRL_UNI 1u << 3
-#define MAXCTRL_SEL_SH 4
-#define MAXCTRL_STR 1u << 7
-
/*
* Read MAX1111 ADC
*/
+extern int max1111_read_channel(int);
+
int sharpsl_pm_pxa_read_max1111(int channel)
{
if (machine_is_tosa()) // Ugly, better move this function into another module
return 0;
- return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
- | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+ /* max1111 accepts channels from 0-3, however,
+ * it is encoded from 0-7 here in the code.
+ */
+ return max1111_read_channel(channel >> 1);
}
void sharpsl_pm_pxa_init(void)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b569f3b4cf3..9b4f24c7c05 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,16 +19,23 @@
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
@@ -37,7 +44,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
#include <mach/i2c.h>
@@ -46,7 +53,7 @@
#include <mach/ohci.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
-#include <mach/akita.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl.h>
@@ -57,6 +64,66 @@
#include "devices.h"
#include "sharpsl.h"
+static unsigned long spitz_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO78_nCS_2, /* SCOOP #2 */
+ GPIO80_nCS_4, /* SCOOP #1 */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* GPIOs */
+ GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */
+ GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */
+ GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */
+ GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */
+ GPIO35_GPIO, /* SPITZ_GPIO_USB_DEVICE */
+ GPIO22_GPIO, /* SPITZ_GPIO_HSYNC */
+ GPIO94_GPIO, /* SPITZ_GPIO_CF_CD */
+ GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
+ GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
/*
* Spitz SCOOP Device #1
*/
@@ -69,10 +136,11 @@ static struct resource spitz_scoop_resources[] = {
};
static struct scoop_config spitz_scoop_setup = {
- .io_dir = SPITZ_SCP_IO_DIR,
+ .io_dir = SPITZ_SCP_IO_DIR,
.io_out = SPITZ_SCP_IO_OUT,
- .suspend_clr = SPITZ_SCP_SUS_CLR,
- .suspend_set = SPITZ_SCP_SUS_SET,
+ .suspend_clr = SPITZ_SCP_SUS_CLR,
+ .suspend_set = SPITZ_SCP_SUS_SET,
+ .gpio_base = SPITZ_SCP_GPIO_BASE,
};
struct platform_device spitzscoop_device = {
@@ -97,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = {
};
static struct scoop_config spitz_scoop2_setup = {
- .io_dir = SPITZ_SCP2_IO_DIR,
+ .io_dir = SPITZ_SCP2_IO_DIR,
.io_out = SPITZ_SCP2_IO_OUT,
- .suspend_clr = SPITZ_SCP2_SUS_CLR,
- .suspend_set = SPITZ_SCP2_SUS_SET,
+ .suspend_clr = SPITZ_SCP2_SUS_CLR,
+ .suspend_set = SPITZ_SCP2_SUS_SET,
+ .gpio_base = SPITZ_SCP2_GPIO_BASE,
};
struct platform_device spitzscoop2_device = {
@@ -122,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
if (new_cpr & 0x0007) {
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
if (!(cpr & 0x0002) && !(cpr & 0x0004))
mdelay(5);
if (device == SPITZ_PWR_CF)
@@ -138,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
mdelay(1);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
} else {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
}
}
}
-static void spitz_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
- GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO85_nPCE_1_MD);
- pxa_gpio_mode(GPIO54_nPCE_2_MD);
- pxa_gpio_mode(GPIO104_pSKTSEL_MD);
-}
-
static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
{
/* Only need to override behaviour for slot 0 */
@@ -191,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
static struct scoop_pcmcia_config spitz_pcmcia_config = {
.devs = &spitz_pcmcia_scoop[0],
.num_devs = 2,
- .pcmcia_init = spitz_pcmcia_init,
.power_ctrl = spitz_pcmcia_pwr,
};
EXPORT_SYMBOL(spitzscoop_device);
EXPORT_SYMBOL(spitzscoop2_device);
-
/*
- * Spitz SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
+ * Spitz Keyboard Device
*/
-struct platform_device spitzssp_device = {
- .name = "corgi-ssp",
- .dev = {
- .parent = &spitzscoop_device.dev,
- },
+static struct platform_device spitzkbd_device = {
+ .name = "spitz-keyboard",
.id = -1,
};
-struct corgissp_machinfo spitz_ssp_machinfo = {
- .port = 2,
- .cs_lcdcon = SPITZ_GPIO_LCDCON_CS,
- .cs_ads7846 = SPITZ_GPIO_ADS7846_CS,
- .cs_max1111 = SPITZ_GPIO_MAX1111_CS,
- .clk_lcdcon = 520,
- .clk_ads7846 = 14,
- .clk_max1111 = 56,
-};
-
/*
- * Spitz Backlight Device
+ * Spitz LEDs
*/
-static void spitz_bl_kick_battery(void)
-{
- void (*kick_batt)(void);
-
- kick_batt = symbol_get(sharpsl_battery_kick);
- if (kick_batt) {
- kick_batt();
- symbol_put(sharpsl_battery_kick);
- }
-}
-
-static struct generic_bl_info spitz_bl_machinfo = {
- .name = "corgi-bl",
- .default_intensity = 0x1f,
- .limit_mask = 0x0b,
- .max_intensity = 0x2f,
- .kick_battery = spitz_bl_kick_battery,
-};
-
-static struct platform_device spitzbl_device = {
- .name = "generic-bl",
- .dev = {
- .platform_data = &spitz_bl_machinfo,
+static struct gpio_led spitz_gpio_leds[] = {
+ {
+ .name = "spitz:amber:charge",
+ .default_trigger = "sharpsl-charge",
+ .gpio = SPITZ_GPIO_LED_ORANGE,
+ },
+ {
+ .name = "spitz:green:hddactivity",
+ .default_trigger = "ide-disk",
+ .gpio = SPITZ_GPIO_LED_GREEN,
},
- .id = -1,
};
-
-/*
- * Spitz Keyboard Device
- */
-static struct platform_device spitzkbd_device = {
- .name = "spitz-keyboard",
- .id = -1,
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+ .leds = spitz_gpio_leds,
+ .num_leds = ARRAY_SIZE(spitz_gpio_leds),
};
-
-/*
- * Spitz LEDs
- */
static struct platform_device spitzled_device = {
- .name = "spitz-led",
+ .name = "leds-gpio",
.id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_leds_info,
+ },
};
-/*
- * Spitz Touch Screen Device
- */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master spitz_spi_info = {
+ .num_chipselect = 3,
+};
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
+static struct ads7846_platform_data spitz_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = SPITZ_GPIO_TP_INT,
+};
-static void inline sharpsl_wait_sync(int gpio)
+static void spitz_ads7846_cs(u32 command)
{
- while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
- while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+ gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
}
-static struct device *spitz_pxafb_dev;
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+ .cs_control = spitz_ads7846_cs,
+};
-static int is_pxafb_device(struct device * dev, void * data)
+static void spitz_bl_kick_battery(void)
{
- struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
- return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
+ void (*kick_batt)(void);
-static unsigned long spitz_get_hsync_invperiod(void)
-{
-#ifdef CONFIG_FB_PXA
- if (!spitz_pxafb_dev) {
- spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
- if (!spitz_pxafb_dev)
- return 0;
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
}
- if (!get_hsync_invperiod)
- get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
- if (!get_hsync_invperiod)
-#endif
- return 0;
-
- return get_hsync_invperiod(spitz_pxafb_dev);
}
-static void spitz_put_hsync(void)
-{
- put_device(spitz_pxafb_dev);
- if (get_hsync_invperiod)
- symbol_put(pxafb_get_hsync_time);
- spitz_pxafb_dev = NULL;
- get_hsync_invperiod = NULL;
-}
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT,
+ .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON,
+ .kick_battery = spitz_bl_kick_battery,
+};
-static void spitz_wait_hsync(void)
+static void spitz_lcdcon_cs(u32 command)
{
- sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+ gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
}
-static struct resource spitzts_resources[] = {
- [0] = {
- .start = SPITZ_IRQ_GPIO_TP_INT,
- .end = SPITZ_IRQ_GPIO_TP_INT,
- .flags = IORESOURCE_IRQ,
- },
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+ .cs_control = spitz_lcdcon_cs,
};
-static struct corgits_machinfo spitz_ts_machinfo = {
- .get_hsync_invperiod = spitz_get_hsync_invperiod,
- .put_hsync = spitz_put_hsync,
- .wait_hsync = spitz_wait_hsync,
+static void spitz_max1111_cs(u32 command)
+{
+ gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+ .cs_control = spitz_max1111_cs,
};
-static struct platform_device spitzts_device = {
- .name = "corgi-ts",
- .dev = {
- .parent = &spitzssp_device.dev,
- .platform_data = &spitz_ts_machinfo,
+static struct spi_board_info spitz_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spitz_ads7846_info,
+ .controller_data= &spitz_ads7846_chip,
+ .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 2,
+ .chip_select = 1,
+ .platform_data = &spitz_lcdcon_info,
+ .controller_data= &spitz_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 2,
+ .chip_select = 2,
+ .controller_data= &spitz_max1111_chip,
},
- .id = -1,
- .num_resources = ARRAY_SIZE(spitzts_resources),
- .resource = spitzts_resources,
};
+static void __init spitz_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
+ if (err)
+ goto err_free_2;
+
+ if (machine_is_akita()) {
+ spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+ spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+ }
+
+ pxa2xx_set_spi_info(2, &spitz_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+ return;
+
+err_free_2:
+ gpio_free(SPITZ_GPIO_LCDCON_CS);
+err_free_1:
+ gpio_free(SPITZ_GPIO_ADS7846_CS);
+}
+#else
+static inline void spitz_init_spi(void) {}
+#endif
/*
* MMC/SD Device
@@ -364,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
{
int err;
- /* setup GPIO for PXA27x MMC controller */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
- pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
- pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+ err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+ if (err)
+ goto err_out;
+
+ err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+ if (err)
+ goto err_free_1;
+
+ gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+ gpio_direction_input(SPITZ_GPIO_nSD_WP);
spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err)
- printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ if (err) {
+ pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+ __func__);
+ goto err_free_2;
+ }
+ return 0;
+err_free_2:
+ gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+ gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
return err;
}
@@ -397,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
static int spitz_mci_get_ro(struct device *dev)
{
- return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+ return gpio_get_value(SPITZ_GPIO_nSD_WP);
}
static void spitz_mci_exit(struct device *dev, void *data)
{
free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(SPITZ_GPIO_nSD_WP);
+ gpio_free(SPITZ_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -419,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
*/
static int spitz_ohci_init(struct device *dev)
{
- /* Only Port 2 is connected */
- pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
- pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
- pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
-
- /* Setup USB Port 2 Output Control Register */
- UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
- GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+ int err;
- UHCHR = (UHCHR) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+ err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+ if (err)
+ return err;
- UHCRHDA |= UHCRHDA_NOCP;
+ /* Only Port 2 is connected
+ * Setup USB Port 2 Output Control Register
+ */
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
- return 0;
+ return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
+ .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
@@ -447,29 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
/*
* Irda
*/
+static int spitz_irda_startup(struct device *dev)
+{
+ int rc;
+
+ rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+ if (rc)
+ goto err;
+
+ rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+ if (rc)
+ goto err_dir;
+
+ return 0;
+
+err_dir:
+ gpio_free(SPITZ_GPIO_IR_ON);
+err:
+ return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_IR_ON);
+}
+
static void spitz_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF)
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+ gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
#ifdef CONFIG_MACH_AKITA
static void akita_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF)
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
- else
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+ gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
#endif
static struct pxaficp_platform_data spitz_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = spitz_irda_transceiver_mode,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = spitz_irda_transceiver_mode,
+ .startup = spitz_irda_startup,
+ .shutdown = spitz_irda_shutdown,
};
@@ -477,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
* Spitz PXA Framebuffer
*/
-static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
- if (on)
- corgi_lcdtg_hw_init(var->xres);
- else
- corgi_lcdtg_suspend();
-}
-
static struct pxafb_mode_info spitz_pxafb_modes[] = {
{
.pixclock = 19231,
@@ -517,18 +592,13 @@ static struct pxafb_mach_info spitz_pxafb_info = {
.modes = &spitz_pxafb_modes[0],
.num_modes = 2,
.fixed_modes = 1,
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
- .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH,
- .pxafb_lcd_power = spitz_lcd_power,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
};
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
- &spitzssp_device,
&spitzkbd_device,
- &spitzts_device,
- &spitzbl_device,
&spitzled_device,
};
@@ -554,57 +624,26 @@ static void __init common_init(void)
PMCR = 0x00;
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x0158C000;
- PGSR1 = 0x00FF0080;
- PGSR2 = 0x0001C004;
-
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
- corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
- pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
+ spitz_init_spi();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&spitz_mci_platform_data);
pxa_set_ohci_info(&spitz_ohci_platform_data);
pxa_set_ficp_info(&spitz_ficp_platform_data);
- set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
pxa_set_i2c_info(NULL);
}
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void spitz_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
- else
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
- if (intensity)
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-
static void __init spitz_init(void)
{
platform_scoop_config = &spitz_pcmcia_config;
- spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
-
common_init();
platform_device_register(&spitzscoop2_device);
@@ -615,32 +654,17 @@ static void __init spitz_init(void)
/*
* Akita IO Expander
*/
-struct platform_device akitaioexp_device = {
- .name = "akita-ioexp",
- .id = -1,
+static struct pca953x_platform_data akita_ioexp = {
+ .gpio_base = AKITA_IOEXP_GPIO_BASE,
};
-EXPORT_SYMBOL_GPL(akitaioexp_device);
-
-static void akita_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via IO-Expander */
- if (intensity & 0x0020)
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
- else
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
- if (intensity)
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
- else
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
+static struct i2c_board_info akita_i2c_board_info[] = {
+ {
+ .type = "max7310",
+ .addr = 0x18,
+ .platform_data = &akita_ioexp,
+ },
+};
static void __init akita_init(void)
{
@@ -649,11 +673,10 @@ static void __init akita_init(void)
/* We just pretend the second element of the array doesn't exist */
spitz_pcmcia_config.num_devs = 1;
platform_scoop_config = &spitz_pcmcia_config;
- spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
- platform_device_register(&akitaioexp_device);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
- spitzscoop_device.dev.parent = &akitaioexp_device.dev;
common_init();
}
#endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8a40505dfd2..53018db106a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -21,7 +21,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
@@ -48,44 +47,35 @@ static void spitz_charger_init(void)
static void spitz_measure_temp(int on)
{
- if (on)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+ gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
}
static void spitz_charge(int on)
{
if (on) {
if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+ gpio_set_value(SPITZ_GPIO_JK_B, 1);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
} else {
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+ gpio_set_value(SPITZ_GPIO_JK_B, 0);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
}
} else {
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+ gpio_set_value(SPITZ_GPIO_JK_B, 0);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
}
}
static void spitz_discharge(int on)
{
- if (on)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+ gpio_set_value(SPITZ_GPIO_JK_A, on);
}
/* HACK - For unknown reasons, accurate voltage readings are only made with a load
on the power bus which the green led on spitz provides */
static void spitz_discharge1(int on)
{
- if (on)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+ gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
}
static void spitz_presuspend(void)
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9bd93c5f28b..2c31ec72568 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -28,8 +28,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/ssp.h>
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index b0d6b32654c..f8a9a62959e 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -155,7 +155,7 @@ static void __init pxa_timer_init(void)
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- if (cpu_is_pxa21x() || cpu_is_pxa25x())
+ if (cpu_is_pxa25x())
clock_tick_rate = 3686400;
else if (machine_is_mainstone())
clock_tick_rate = 3249600;
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3ed757e6bcc..a13dbf3c2c0 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -22,8 +22,8 @@
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -31,7 +31,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -40,41 +39,148 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/i2c.h>
#include "generic.h"
#include "devices.h"
-/********************************************************************************************
+/* comment out the following line if you want to use the
+ * Standard UART from PXA for serial / irda transmission
+ * and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* DiskOnChip CS */
+ GPIO93_GPIO, /* TRIZEPS4_DOC_IRQ */
+ GPIO94_GPIO, /* DOC lock */
+
+ GPIO78_nCS_2, /* DM9000 CS */
+ GPIO101_GPIO, /* TRIZEPS4_ETH_IRQ */
+
+ GPIO79_nCS_3, /* Logic CS */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* UART */
+ GPIO9_FFUART_CTS,
+ GPIO10_FFUART_DCD,
+ GPIO16_FFUART_TXD,
+ GPIO33_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO82_FFUART_DTR,
+ GPIO83_FFUART_RTS,
+ GPIO96_FFUART_RXD,
+
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+#else
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+#endif
+ /* PCMCIA */
+ GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */
+ GPIO13_GPIO, /* TRIZEPS4_READY_NINT */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO102_nPCE_1,
+ GPIO104_PSKTSEL,
+
+ /* MultiMediaCard */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO12_GPIO, /* TRIZEPS4_MMC_IRQ */
+
+ /* USB OHCI */
+ GPIO88_USBH1_PWR, /* USBHPWR1 */
+ GPIO89_USBH1_PEN, /* USBHPEN1 */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+ /* SSP 2 */
+ GPIO14_SSP2_SFRM,
+ GPIO19_SSP2_SCLK,
+ GPIO53_GPIO, /* TRIZEPS4_SPI_IRQ */
+ GPIO86_SSP2_RXD,
+ GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
* ONBOARD FLASH
- ********************************************************************************************/
+ ****************************************************************************/
static struct mtd_partition trizeps4_partitions[] = {
{
.name = "Bootloader",
.offset = 0x00000000,
.size = 0x00040000,
.mask_flags = MTD_WRITEABLE /* force read-only */
- },{
+ }, {
.name = "Backup",
.offset = 0x00040000,
.size = 0x00040000,
- },{
+ }, {
.name = "Image",
.offset = 0x00080000,
.size = 0x01080000,
- },{
+ }, {
.name = "IPSM",
.offset = 0x01100000,
.size = 0x00e00000,
- },{
+ }, {
.name = "Registry",
.offset = 0x01f00000,
.size = MTDPART_SIZ_FULL,
@@ -105,9 +211,9 @@ static struct platform_device flash_device = {
.num_resources = 1,
};
-/********************************************************************************************
+/****************************************************************************
* DAVICOM DM9000 Ethernet
- ********************************************************************************************/
+ ****************************************************************************/
static struct resource dm9000_resources[] = {
[0] = {
.start = TRIZEPS4_ETH_PHYS+0x300,
@@ -122,67 +228,68 @@ static struct resource dm9000_resources[] = {
[2] = {
.start = TRIZEPS4_ETH_IRQ,
.end = TRIZEPS4_ETH_IRQ,
- .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
+static struct dm9000_plat_data tri_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
static struct platform_device dm9000_device = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
+ .dev = {
+ .platform_data = &tri_dm9000_platdata,
+ }
};
-/********************************************************************************************
- * PXA270 serial ports
- ********************************************************************************************/
-static struct plat_serial8250_port tri_serial_ports[] = {
-#ifdef CONFIG_SERIAL_PXA
- /* this uses the own PXA driver */
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
{
- 0,
- },
-#else
- /* this uses the generic 8520 driver */
- [0] = {
- .membase = (void *)&FFUART,
- .irq = IRQ_FFUART,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- .uartclk = (921600*16),
- },
- [1] = {
- .membase = (void *)&BTUART,
- .irq = IRQ_BTUART,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- .uartclk = (921600*16),
+ .name = "led0:orange:heartbeat", /* */
+ .default_trigger = "heartbeat",
+ .gpio = GPIO_HEARTBEAT_LED,
+ .active_low = 1,
},
{
- 0,
+ .name = "led1:yellow:cpubusy", /* */
+ .default_trigger = "cpu-busy",
+ .gpio = GPIO_SYS_BUSY_LED,
+ .active_low = 1,
},
#endif
};
-static struct platform_device uart_devices = {
- .name = "serial8250",
- .id = 0,
+static struct gpio_led_platform_data trizeps4_led_data = {
+ .leds = trizeps4_led,
+ .num_leds = ARRAY_SIZE(trizeps4_led),
+};
+
+static struct platform_device leds_devices = {
+ .name = "leds-gpio",
+ .id = -1,
.dev = {
- .platform_data = tri_serial_ports,
+ .platform_data = &trizeps4_led_data,
},
- .num_resources = 0,
- .resource = NULL,
};
-static struct platform_device * trizeps4_devices[] __initdata = {
+static struct platform_device *trizeps4_devices[] __initdata = {
&flash_device,
- &uart_devices,
&dm9000_device,
+ &leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+ &flash_device,
+ &leds_devices,
};
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
static short trizeps_conxs_bcr;
/* PCCARD power switching supports only 3,3V */
@@ -192,108 +299,63 @@ void board_pcmcia_power(int power)
/* switch power on, put in reset and enable buffers */
trizeps_conxs_bcr |= power;
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
- trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
- ConXS_BCR = trizeps_conxs_bcr;
+ trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+ BCR_writew(trizeps_conxs_bcr);
/* wait a little */
udelay(2000);
/* take reset away */
- trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
- ConXS_BCR = trizeps_conxs_bcr;
+ trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+ BCR_writew(trizeps_conxs_bcr);
udelay(2000);
} else {
/* put in reset */
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
- ConXS_BCR = trizeps_conxs_bcr;
+ BCR_writew(trizeps_conxs_bcr);
udelay(1000);
/* switch power off */
- trizeps_conxs_bcr &= ~(0xf);
- ConXS_BCR = trizeps_conxs_bcr;
-
+ trizeps_conxs_bcr &= ~0xf;
+ BCR_writew(trizeps_conxs_bcr);
}
- pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
+ pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+ trizeps_conxs_bcr);
}
+EXPORT_SYMBOL(board_pcmcia_power);
/* backlight power switching for LCD panel */
static void board_backlight_power(int on)
{
- if (on) {
+ if (on)
trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
- } else {
+ else
trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
- }
- pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
- ConXS_BCR = trizeps_conxs_bcr;
-}
-/* Powersupply for MMC/SD cardslot */
-static void board_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
-
- if (( 1 << vdd) & p_d->ocr_mask) {
- pr_debug("%s: on\n", __func__);
- /* FIXME fill in values here */
- } else {
- pr_debug("%s: off\n", __func__);
- /* FIXME fill in values here */
- }
-}
-
-static short trizeps_conxs_ircr;
-
-/* Switch modes and Power for IRDA receiver */
-static void board_irda_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (mode & IR_SIRMODE) {
- /* Slow mode */
- trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
- } else if (mode & IR_FIRMODE) {
- /* Fast mode */
- trizeps_conxs_ircr |= ConXS_IRCR_MODE;
- }
- pxa2xx_transceiver_mode(dev, mode);
- if (mode & IR_OFF) {
- trizeps_conxs_ircr |= ConXS_IRCR_SD;
- } else {
- trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
- }
- /* FIXME write values to register */
- local_irq_restore(flags);
+ pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+ trizeps_conxs_bcr);
+ BCR_writew(trizeps_conxs_bcr);
}
-#else
-/* for other baseboards define dummies */
-void board_pcmcia_power(int power) {;}
-#define board_backlight_power NULL
-#define board_mci_power NULL
-#define board_irda_mode NULL
-
-#endif /* CONFIG_MACH_TRIZEPS4_CONXS */
-EXPORT_SYMBOL(board_pcmcia_power);
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+ { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+ void *data)
{
int err;
- /* setup GPIO for PXA27x MMC controller */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
- pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
- "MMC card detect", data);
- if (err)
- printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
- return err;
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+ "MMC card detect IRQ\n");
+ return -1;
+ }
+ return 0;
}
static void trizeps4_mci_exit(struct device *dev, void *data)
@@ -303,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
static struct pxamci_platform_data trizeps4_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay = 1,
.init = trizeps4_mci_init,
.exit = trizeps4_mci_exit,
- .setpower = board_mci_power,
+ .get_ro = NULL, /* write-protection not supported */
+ .setpower = NULL, /* power-switching not supported */
};
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = board_irda_mode,
-};
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
-static int trizeps4_ohci_init(struct device *dev)
+static int trizeps4_irda_startup(struct device *dev)
{
- /* setup Port1 GPIO pin. */
- pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
- pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+ IRCR_writew(trizeps_conxs_ircr);
return 0;
}
-static void trizeps4_ohci_exit(struct device *dev)
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
{
- ;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /* Switch mode */
+ if (mode & IR_SIRMODE)
+ trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
+ else if (mode & IR_FIRMODE) {
+ trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */
+
+ /* Switch power */
+ if (mode & IR_OFF)
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ else
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+ IRCR_writew(trizeps_conxs_ircr);
+ local_irq_restore(flags);
+
+ pxa2xx_transceiver_mode(dev, mode);
}
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = trizeps4_irda_transceiver_mode,
+ .startup = trizeps4_irda_startup,
+ .shutdown = trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = trizeps4_ohci_init,
- .exit = trizeps4_ohci_exit,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static struct map_desc trizeps4_io_desc[] __initdata = {
@@ -372,105 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = {
};
static struct pxafb_mode_info sharp_lcd_mode = {
- .pixclock = 78000,
- .xres = 640,
- .yres = 480,
- .bpp = 8,
- .hsync_len = 4,
- .left_margin = 4,
- .right_margin = 4,
- .vsync_len = 2,
- .upper_margin = 0,
- .lower_margin = 0,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .cmap_greyscale = 0,
+ .pixclock = 78000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 4,
+ .left_margin = 4,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
};
static struct pxafb_mach_info sharp_lcd = {
- .modes = &sharp_lcd_mode,
- .num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
- .lccr3 = 0x0340ff02,
- .pxafb_backlight_power = board_backlight_power,
+ .modes = &sharp_lcd_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pxafb_backlight_power = board_backlight_power,
};
static struct pxafb_mode_info toshiba_lcd_mode = {
- .pixclock = 39720,
- .xres = 640,
- .yres = 480,
- .bpp = 8,
- .hsync_len = 63,
- .left_margin = 12,
- .right_margin = 12,
- .vsync_len = 4,
- .upper_margin = 32,
- .lower_margin = 10,
- .sync = 0,
- .cmap_greyscale = 0,
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 63,
+ .left_margin = 12,
+ .right_margin = 12,
+ .vsync_len = 4,
+ .upper_margin = 32,
+ .lower_margin = 10,
+ .sync = 0,
+ .cmap_greyscale = 0,
};
static struct pxafb_mach_info toshiba_lcd = {
- .modes = &toshiba_lcd_mode,
- .num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .lccr0 = LCCR0_Color | LCCR0_Act,
- .lccr3 = 0x03400002,
- .pxafb_backlight_power = board_backlight_power,
+ .modes = &toshiba_lcd_mode,
+ .num_modes = 1,
+ .lcd_conn = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pxafb_backlight_power = board_backlight_power,
};
static void __init trizeps4_init(void)
{
- platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+ if (machine_is_trizeps4wl()) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+ platform_add_devices(trizeps4wl_devices,
+ ARRAY_SIZE(trizeps4wl_devices));
+ } else {
+ platform_add_devices(trizeps4_devices,
+ ARRAY_SIZE(trizeps4_devices));
+ }
-/* set_pxa_fb_info(&sharp_lcd); */
- set_pxa_fb_info(&toshiba_lcd);
+ if (0) /* dont know how to determine LCD */
+ set_pxa_fb_info(&sharp_lcd);
+ else
+ set_pxa_fb_info(&toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
pxa_set_ac97_info(NULL);
-}
-
-static void __init trizeps4_map_io(void)
-{
- pxa_map_io();
- iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
- /* for DiskOnChip */
- pxa_gpio_mode(GPIO15_nCS_1_MD);
-
- /* for off-module PIC on ConXS board */
- pxa_gpio_mode(GPIO_PIC | GPIO_IN);
-
- /* UCB1400 irq */
- pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
-
- /* for DM9000 LAN */
- pxa_gpio_mode(GPIO78_nCS_2_MD);
- pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-
- /* for PCMCIA device */
- pxa_gpio_mode(GPIO_PCD | GPIO_IN);
- pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
-
- /* for I2C adapter */
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, trizeps4_i2c_devices,
+ ARRAY_SIZE(trizeps4_i2c_devices));
- /* MMC_DET s.o. */
- pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
-
- /* whats that for ??? */
- pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-#ifdef CONFIG_LEDS
- pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
- pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
-#endif
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
#ifdef CONFIG_IDE_PXA_CF
/* if boot direct from compact flash dont disable power */
trizeps_conxs_bcr = 0x0009;
@@ -478,18 +545,24 @@ static void __init trizeps4_map_io(void)
/* this is the reset value */
trizeps_conxs_bcr = 0x00A0;
#endif
- ConXS_BCR = trizeps_conxs_bcr;
-#endif
+ BCR_writew(trizeps_conxs_bcr);
+ board_backlight_power(1);
+}
+
+static void __init trizeps4_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-#warning FIXME - accessing PM registers directly is deprecated
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x0158C000;
- PGSR1 = 0x00FF0080;
- PGSR2 = 0x0001C004;
- /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
- PCFR |= PCFR_OPDE;
+ if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+ /* if flash is 16 bit wide its a Trizeps4 WL */
+ __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+ trizeps4_flash_data[0].width = 2;
+ } else {
+ /* if flash is 32 bit wide its a Trizeps4 */
+ __machine_arch_type = MACH_TYPE_TRIZEPS4;
+ trizeps4_flash_data[0].width = 4;
+ }
}
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
@@ -503,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.timer = &pxa_timer,
MACHINE_END
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+ /* MAINTAINER("Jürgen Schindele") */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .init_machine = trizeps4_init,
+ .map_io = trizeps4_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 00000000000..d7632f63603
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,951 @@
+/*
+ * linux/arch/arm/mach-pxa/viper.c
+ *
+ * Support for the Arcom VIPER SBC.
+ *
+ * Author: Ian Campbell
+ * Created: Feb 03, 2003
+ * Copyright: Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Based on lubbock.c:
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/memory.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
+#include <linux/usb/isp116x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/bitfield.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/i2c.h>
+#include <mach/viper.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned int icr;
+
+static void viper_icr_set_bit(unsigned int bit)
+{
+ icr |= bit;
+ VIPER_ICR = icr;
+}
+
+static void viper_icr_clear_bit(unsigned int bit)
+{
+ icr &= ~bit;
+ VIPER_ICR = icr;
+}
+
+/* This function is used from the pcmcia module to reset the CF */
+void viper_cf_rst(int state)
+{
+ if (state)
+ viper_icr_set_bit(VIPER_ICR_CF_RST);
+ else
+ viper_icr_clear_bit(VIPER_ICR_CF_RST);
+}
+EXPORT_SYMBOL(viper_cf_rst);
+
+/*
+ * The CPLD version register was not present on VIPER boards prior to
+ * v2i1. On v1 boards where the version register is not present we
+ * will just read back the previous value from the databus.
+ *
+ * Therefore we do two reads. The first time we write 0 to the
+ * (read-only) register before reading and the second time we write
+ * 0xff first. If the two reads do not match or they read back as 0xff
+ * or 0x00 then we have version 1 hardware.
+ */
+static u8 viper_hw_version(void)
+{
+ u8 v1, v2;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ VIPER_VERSION = 0;
+ v1 = VIPER_VERSION;
+ VIPER_VERSION = 0xff;
+ v2 = VIPER_VERSION;
+
+ v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
+
+ local_irq_restore(flags);
+ return v1;
+}
+
+/* CPU sysdev */
+static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ viper_icr_set_bit(VIPER_ICR_R_DIS);
+ return 0;
+}
+
+static int viper_cpu_resume(struct sys_device *sysdev)
+{
+ viper_icr_clear_bit(VIPER_ICR_R_DIS);
+ return 0;
+}
+
+static struct sysdev_driver viper_cpu_sysdev_driver = {
+ .suspend = viper_cpu_suspend,
+ .resume = viper_cpu_resume,
+};
+
+static unsigned int current_voltage_divisor;
+
+/*
+ * If force is not true then step from existing to new divisor. If
+ * force is true then jump straight to the new divisor. Stepping is
+ * used because if the jump in voltage is too large, the VCC can dip
+ * too low and the regulator cuts out.
+ *
+ * force can be used to initialize the divisor to a know state by
+ * setting the value for the current clock speed, since we are already
+ * running at that speed we know the voltage should be pretty close so
+ * the jump won't be too large
+ */
+static void viper_set_core_cpu_voltage(unsigned long khz, int force)
+{
+ int i = 0;
+ unsigned int divisor = 0;
+ const char *v;
+
+ if (khz < 200000) {
+ v = "1.0"; divisor = 0xfff;
+ } else if (khz < 300000) {
+ v = "1.1"; divisor = 0xde5;
+ } else {
+ v = "1.3"; divisor = 0x325;
+ }
+
+ pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
+ v, (int)khz / 1000, (int)khz % 1000);
+
+#define STEP 0x100
+ do {
+ int step;
+
+ if (force)
+ step = divisor;
+ else if (current_voltage_divisor < divisor - STEP)
+ step = current_voltage_divisor + STEP;
+ else if (current_voltage_divisor > divisor + STEP)
+ step = current_voltage_divisor - STEP;
+ else
+ step = divisor;
+ force = 0;
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+ for (i = 1 << 11 ; i > 0 ; i >>= 1) {
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+ }
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+ current_voltage_divisor = step;
+ } while (current_voltage_divisor != divisor);
+}
+
+/* Interrupt handling */
+static unsigned long viper_irq_enabled_mask;
+
+static void viper_ack_irq(unsigned int irq)
+{
+ int viper_irq = irq - PXA_ISA_IRQ(0);
+
+ if (viper_irq < 8)
+ VIPER_LO_IRQ_STATUS = 1 << viper_irq;
+ else
+ VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8);
+}
+
+static void viper_mask_irq(unsigned int irq)
+{
+ viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0)));
+}
+
+static void viper_unmask_irq(unsigned int irq)
+{
+ viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0)));
+}
+
+static inline unsigned long viper_irq_pending(void)
+{
+ return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
+ viper_irq_enabled_mask;
+}
+
+static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending;
+
+ pending = viper_irq_pending();
+ do {
+ if (likely(pending)) {
+ irq = PXA_ISA_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ }
+ pending = viper_irq_pending();
+ } while (pending);
+}
+
+static struct irq_chip viper_irq_chip = {
+ .name = "ISA",
+ .ack = viper_ack_irq,
+ .mask = viper_mask_irq,
+ .unmask = viper_unmask_irq
+};
+
+static void __init viper_init_irq(void)
+{
+ const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+ int irq;
+ int isa_irq;
+
+ pxa25x_init_irq();
+
+ /* setup ISA IRQs */
+ for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) {
+ isa_irq = isa_irqs[irq];
+ set_irq_chip(isa_irq, &viper_irq_chip);
+ set_irq_handler(isa_irq, handle_edge_irq);
+ set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+ viper_irq_handler);
+ set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+
+#ifndef CONFIG_SERIAL_PXA
+ /*
+ * 8250 doesn't support IRQ_TYPE being passed as part
+ * of the plat_serial8250_port structure...
+ */
+ set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
+ set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
+#endif
+}
+
+/* Flat Panel */
+static struct pxafb_mode_info fb_mode_info[] = {
+ {
+ .pixclock = 157500,
+
+ .xres = 320,
+ .yres = 240,
+
+ .bpp = 16,
+
+ .hsync_len = 63,
+ .left_margin = 7,
+ .right_margin = 13,
+
+ .vsync_len = 20,
+ .upper_margin = 0,
+ .lower_margin = 0,
+
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info fb_info = {
+ .modes = fb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int viper_backlight_init(struct device *dev)
+{
+ int ret;
+
+ /* GPIO9 and 10 control FB backlight. Initialise to off */
+ ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
+ if (ret)
+ goto err_request_bckl;
+
+ ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
+ if (ret)
+ goto err_request_lcd;
+
+ ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
+ if (ret)
+ goto err_dir;
+
+ ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
+ if (ret)
+ goto err_dir;
+
+ return 0;
+
+err_dir:
+ gpio_free(VIPER_LCD_EN_GPIO);
+err_request_lcd:
+ gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+err_request_bckl:
+ dev_err(dev, "Failed to setup LCD GPIOs\n");
+
+ return ret;
+}
+
+static int viper_backlight_notify(int brightness)
+{
+ gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
+ gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
+
+ return brightness;
+}
+
+static void viper_backlight_exit(struct device *dev)
+{
+ gpio_free(VIPER_LCD_EN_GPIO);
+ gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+}
+
+static struct platform_pwm_backlight_data viper_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 1000000,
+ .init = viper_backlight_init,
+ .notify = viper_backlight_notify,
+ .exit = viper_backlight_exit,
+};
+
+static struct platform_device viper_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &viper_backlight_data,
+ },
+};
+
+/* Ethernet */
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = VIPER_ETH_PHYS + 0x300,
+ .end = VIPER_ETH_PHYS + 0x30f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(VIPER_ETH_GPIO),
+ .end = gpio_to_irq(VIPER_ETH_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+ [2] = {
+ .name = "smc91x-data32",
+ .start = VIPER_ETH_DATA_PHYS,
+ .end = VIPER_ETH_DATA_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata viper_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &viper_smc91x_info,
+ },
+};
+
+/* i2c */
+static struct i2c_gpio_platform_data i2c_bus_data = {
+ .sda_pin = VIPER_RTC_I2C_SDA_GPIO,
+ .scl_pin = VIPER_RTC_I2C_SCL_GPIO,
+ .udelay = 10,
+ .timeout = 100,
+};
+
+static struct platform_device i2c_bus_device = {
+ .name = "i2c-gpio",
+ .id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
+ .dev = {
+ .platform_data = &i2c_bus_data,
+ }
+};
+
+static struct i2c_board_info __initdata viper_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1338", 0x68),
+ },
+};
+
+/*
+ * Serial configuration:
+ * You can either have the standard PXA ports driven by the PXA driver,
+ * or all the ports (PXA + 16850) driven by the 8250 driver.
+ * Choose your poison.
+ */
+
+static struct resource viper_serial_resources[] = {
+#ifndef CONFIG_SERIAL_PXA
+ {
+ .start = 0x40100000,
+ .end = 0x4010001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40200000,
+ .end = 0x4020001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40700000,
+ .end = 0x4070001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = VIPER_UARTA_PHYS,
+ .end = VIPER_UARTA_PHYS + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = VIPER_UARTB_PHYS,
+ .end = VIPER_UARTB_PHYS + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+#else
+ {
+ 0,
+ },
+#endif
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+#ifndef CONFIG_SERIAL_PXA
+ /* Internal UARTs */
+ {
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ {
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ {
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ /* External UARTs */
+ {
+ .mapbase = VIPER_UARTA_PHYS,
+ .irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .uartclk = 1843200,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_SKIP_TEST,
+ },
+ {
+ .mapbase = VIPER_UARTB_PHYS,
+ .irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .uartclk = 1843200,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_SKIP_TEST,
+ },
+#endif
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(viper_serial_resources),
+ .resource = viper_serial_resources,
+};
+
+/* USB */
+static void isp116x_delay(struct device *dev, int delay)
+{
+ ndelay(delay);
+}
+
+static struct resource isp116x_resources[] = {
+ [0] = { /* DATA */
+ .start = VIPER_USB_PHYS + 0,
+ .end = VIPER_USB_PHYS + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* ADDR */
+ .start = VIPER_USB_PHYS + 2,
+ .end = VIPER_USB_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = gpio_to_irq(VIPER_USB_GPIO),
+ .end = gpio_to_irq(VIPER_USB_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp116x_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp116x_delay,
+};
+
+static struct platform_device isp116x_device = {
+ .name = "isp116x-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(isp116x_resources),
+ .resource = isp116x_resources,
+ .dev = {
+ .platform_data = &isp116x_platform_data,
+ },
+
+};
+
+/* MTD */
+static struct resource mtd_resources[] = {
+ [0] = { /* RedBoot config + filesystem flash */
+ .start = VIPER_FLASH_PHYS,
+ .end = VIPER_FLASH_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* Boot flash */
+ .start = VIPER_BOOT_PHYS,
+ .end = VIPER_BOOT_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = { /*
+ * SRAM size is actually 256KB, 8bits, with a sparse mapping
+ * (each byte is on a 16bit boundary).
+ */
+ .start = _VIPER_SRAM_BASE,
+ .end = _VIPER_SRAM_BASE + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition viper_boot_flash_partition = {
+ .name = "RedBoot",
+ .size = SZ_1M,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force R/O */
+};
+
+static struct physmap_flash_data viper_flash_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+ [1] = {
+ .width = 2,
+ .parts = &viper_boot_flash_partition,
+ .nr_parts = 1,
+ },
+};
+
+static struct platform_device viper_mtd_devices[] = {
+ [0] = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &viper_flash_data[0],
+ },
+ .resource = &mtd_resources[0],
+ .num_resources = 1,
+ },
+ [1] = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &viper_flash_data[1],
+ },
+ .resource = &mtd_resources[1],
+ .num_resources = 1,
+ },
+};
+
+static struct platform_device *viper_devs[] __initdata = {
+ &smc91x_device,
+ &i2c_bus_device,
+ &serial_device,
+ &isp116x_device,
+ &viper_mtd_devices[0],
+ &viper_mtd_devices[1],
+ &viper_backlight_device,
+};
+
+static mfp_cfg_t viper_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+
+ /* FP Backlight */
+ GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
+ GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
+ GPIO16_PWM0_OUT,
+
+ /* Ethernet PHY Ready */
+ GPIO18_RDY,
+
+ /* Serial shutdown */
+ GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */
+
+ /* Compact-Flash / PC104 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */
+ GPIO32_GPIO, /* VIPER_CF_CD_GPIO */
+ GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */
+
+ /* Integrated UPS control */
+ GPIO20_GPIO, /* VIPER_UPS_GPIO */
+
+ /* Vcc regulator control */
+ GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */
+ GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */
+ GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */
+
+ /* i2c busses */
+ GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */
+ GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */
+ GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */
+ GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */
+
+ /* PC/104 Interrupt */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */
+};
+
+static unsigned long viper_tpm;
+
+static int __init viper_tpm_setup(char *str)
+{
+ strict_strtoul(str, 10, &viper_tpm);
+ return 1;
+}
+
+__setup("tpm=", viper_tpm_setup);
+
+static void __init viper_tpm_init(void)
+{
+ struct platform_device *tpm_device;
+ struct i2c_gpio_platform_data i2c_tpm_data = {
+ .sda_pin = VIPER_TPM_I2C_SDA_GPIO,
+ .scl_pin = VIPER_TPM_I2C_SCL_GPIO,
+ .udelay = 10,
+ .timeout = 100,
+ };
+ char *errstr;
+
+ /* Allocate TPM i2c bus if requested */
+ if (!viper_tpm)
+ return;
+
+ tpm_device = platform_device_alloc("i2c-gpio", 2);
+ if (tpm_device) {
+ if (!platform_device_add_data(tpm_device,
+ &i2c_tpm_data,
+ sizeof(i2c_tpm_data))) {
+ if (platform_device_add(tpm_device)) {
+ errstr = "register TPM i2c bus";
+ goto error_free_tpm;
+ }
+ } else {
+ errstr = "allocate TPM i2c bus data";
+ goto error_free_tpm;
+ }
+ } else {
+ errstr = "allocate TPM i2c device";
+ goto error_tpm;
+ }
+
+ return;
+
+error_free_tpm:
+ kfree(tpm_device);
+error_tpm:
+ pr_err("viper: Couldn't %s, giving up\n", errstr);
+}
+
+static void __init viper_init_vcore_gpios(void)
+{
+ if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
+ goto err_request_data;
+
+ if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
+ goto err_request_clk;
+
+ if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
+ goto err_request_cs;
+
+ if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
+ gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
+ gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
+ goto err_dir;
+
+ /* c/should assume redboot set the correct level ??? */
+ viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+
+ return;
+
+err_dir:
+ gpio_free(VIPER_PSU_nCS_LD_GPIO);
+err_request_cs:
+ gpio_free(VIPER_PSU_CLK_GPIO);
+err_request_clk:
+ gpio_free(VIPER_PSU_DATA_GPIO);
+err_request_data:
+ pr_err("viper: Failed to setup vcore control GPIOs\n");
+}
+
+static void __init viper_init_serial_gpio(void)
+{
+ if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
+ goto err_request;
+
+ if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
+ goto err_dir;
+
+ return;
+
+err_dir:
+ gpio_free(VIPER_UART_SHDN_GPIO);
+err_request:
+ pr_err("viper: Failed to setup UART shutdown GPIO\n");
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int viper_cpufreq_notifier(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ /* TODO: Adjust timings??? */
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if (freq->old < freq->new) {
+ /* we are getting faster so raise the voltage
+ * before we change freq */
+ viper_set_core_cpu_voltage(freq->new, 0);
+ }
+ break;
+ case CPUFREQ_POSTCHANGE:
+ if (freq->old > freq->new) {
+ /* we are slowing down so drop the power
+ * after we change freq */
+ viper_set_core_cpu_voltage(freq->new, 0);
+ }
+ break;
+ case CPUFREQ_RESUMECHANGE:
+ viper_set_core_cpu_voltage(freq->new, 0);
+ break;
+ default:
+ /* ignore */
+ break;
+ }
+
+ return 0;
+}
+
+static struct notifier_block viper_cpufreq_notifier_block = {
+ .notifier_call = viper_cpufreq_notifier
+};
+
+static void __init viper_init_cpufreq(void)
+{
+ if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER))
+ pr_err("viper: Failed to setup cpufreq notifier\n");
+}
+#else
+static inline void viper_init_cpufreq(void) {}
+#endif
+
+static void viper_power_off(void)
+{
+ pr_notice("Shutting off UPS\n");
+ gpio_set_value(VIPER_UPS_GPIO, 1);
+ /* Spin to death... */
+ while (1);
+}
+
+static void __init viper_init(void)
+{
+ u8 version;
+
+ pm_power_off = viper_power_off;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+
+ /* Wake-up serial console */
+ viper_init_serial_gpio();
+
+ set_pxa_fb_info(&fb_info);
+
+ /* v1 hardware cannot use the datacs line */
+ version = viper_hw_version();
+ if (version == 0)
+ smc91x_device.num_resources--;
+
+ pxa_set_i2c_info(NULL);
+ platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
+
+ viper_init_vcore_gpios();
+ viper_init_cpufreq();
+
+ sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+
+ if (version) {
+ pr_info("viper: hardware v%di%d detected. "
+ "CPLD revision %d.\n",
+ VIPER_BOARD_VERSION(version),
+ VIPER_BOARD_ISSUE(version),
+ VIPER_CPLD_REVISION(version));
+ system_rev = (VIPER_BOARD_VERSION(version) << 8) |
+ (VIPER_BOARD_ISSUE(version) << 4) |
+ VIPER_CPLD_REVISION(version);
+ } else {
+ pr_info("viper: No version register.\n");
+ }
+
+ i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
+
+ viper_tpm_init();
+ pxa_set_ac97_info(NULL);
+}
+
+static struct map_desc viper_io_desc[] __initdata = {
+ {
+ .virtual = VIPER_CPLD_BASE,
+ .pfn = __phys_to_pfn(VIPER_CPLD_PHYS),
+ .length = 0x00300000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = VIPER_PC104IO_BASE,
+ .pfn = __phys_to_pfn(_PCMCIA1IO),
+ .length = 0x00800000,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init viper_map_io(void)
+{
+ pxa_map_io();
+
+ iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
+
+ PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
+ /* Maintainer: Marc Zyngier <maz@misterjones.org> */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = viper_map_io,
+ .init_irq = viper_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = viper_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 0cb65b5772f..81380443346 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -29,6 +29,7 @@
#include <mach/pxafb.h>
#include <mach/zylonite.h>
#include <mach/mmc.h>
+#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
@@ -423,6 +424,21 @@ static void __init zylonite_init_nand(void)
static inline void zylonite_init_nand(void) {}
#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+ pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
static void __init zylonite_init(void)
{
/* board-processor specific initialization */
@@ -443,6 +459,7 @@ static void __init zylonite_init(void)
zylonite_init_keypad();
zylonite_init_nand();
zylonite_init_leds();
+ zylonite_init_ohci();
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 095f5c64823..46538885a58 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -73,6 +73,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ /* SSP3 */
+ GPIO91_SSP3_SCLK,
+ GPIO92_SSP3_FRM,
+ GPIO93_SSP3_TXD,
+ GPIO94_SSP3_RXD,
+
/* WM9713 IRQ */
GPIO26_GPIO,
@@ -113,6 +119,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO13_MMC2_CLK,
GPIO14_MMC2_CMD,
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
@@ -209,7 +219,7 @@ static struct pca953x_platform_data gpio_exp[] = {
},
};
-struct i2c_board_info zylonite_i2c_board_info[] = {
+static struct i2c_board_info zylonite_i2c_board_info[] = {
{
.type = "pca9539",
.addr = 0x74,
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 9879d7da2df..0f244744daa 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -69,6 +69,12 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ /* SSP3 */
+ GPIO89_SSP3_SCLK,
+ GPIO90_SSP3_FRM,
+ GPIO91_SSP3_TXD,
+ GPIO92_SSP3_RXD,
+
/* WM9713 IRQ */
GPIO15_GPIO,
@@ -117,6 +123,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO28_MMC2_CLK,
GPIO29_MMC2_CMD,
+ /* USB Host */
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+
/* Debug LEDs */
GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 4f9c84ab781..2f04d54711e 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -27,10 +27,10 @@
#include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/hardware/arm_timer.h>
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 33dbbb41a66..3cea92c70d8 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -23,9 +23,9 @@
#define __ASM_ARCH_REALVIEW_H
#include <linux/amba/bus.h>
+#include <linux/io.h>
#include <asm/leds.h>
-#include <asm/io.h>
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 4d3c8f3f805..a2f61c78adb 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -21,8 +21,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/platform.h>
static inline void arch_idle(void)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 82fa1f26e02..44d178cd573 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -17,11 +17,11 @@
#include <linux/percpu.h>
#include <linux/clockchips.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/hardware/arm_twd.h>
#include <asm/hardware/gic.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 1907d22f4fe..e102aeb0f76 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -13,10 +13,10 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/smp.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/board-eb.h>
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 19a9968fc5b..eb829eb1ebe 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,9 +23,9 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 0986cbd1594..cccdb3eb90f 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,9 +23,9 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f4e7135e3eb..8b863148ec1 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,9 +23,9 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 4b19fe48419..7958a30f893 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -14,11 +14,11 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/fiq.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/uaccess.h>
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 05425d558ee..9bf7e43e286 100644
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -36,4 +36,12 @@
#define FLUSH_BASE_PHYS 0x00000000
#define FLUSH_BASE 0xdf000000
+/*
+ * Sparsemem support. Each section is a maximum of 64MB. The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS 29
+#define SECTION_SIZE_BITS 26
+
#endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index 54d6e3f2d31..bd7268ba17e 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -7,9 +7,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
-#include <asm/io.h>
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index baa9c866d7b..d5862368c4f 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -9,8 +9,8 @@
*/
#define VIDMEM ((char *)SCREEN_START)
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 7a029621db4..9dd15d679c5 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -1,10 +1,10 @@
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/iomd.h>
#include <asm/irq.h>
-#include <asm/io.h>
static void iomd_ack_irq_a(unsigned int irq)
{
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index ce8470fea88..e88d417736a 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -18,9 +18,9 @@
#include <linux/device.h>
#include <linux/serial_8250.h>
#include <linux/ata_platform.h>
+#include <linux/io.h>
#include <asm/elf.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 148d0ddef3e..7a7ed4174c8 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -24,10 +24,10 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index cfa8da5f4e1..9a37c87152b 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -25,12 +25,12 @@
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
@@ -130,8 +130,7 @@ bast_irq_pc104_demux(unsigned int irq,
for (i = 0; stat != 0; i++, stat >>= 1) {
if (stat & 1) {
irqno = bast_pc104_irqs[i];
- desc = irq_desc + irqno;
- desc_handle_irq(irqno, desc);
+ generic_handle_irq(irqno);
}
}
}
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index c9ac206f349..4e07943c1e2 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -31,11 +31,11 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index c6eefb1d590..36a3132f39e 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -25,10 +25,10 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index ec2defebf0d..43535a0e718 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/plat-s3c/regs-watchdog.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
index e9f676bc011..a8cbca6701e 100644
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -10,8 +10,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/map.h>
#include <mach/idle.h>
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index c7936c15ec2..d061fea0190 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -36,6 +36,7 @@
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -43,7 +44,6 @@
#include <asm/mach/flash.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/fb.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 599c0c227b9..8db9c700e3c 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -22,6 +22,7 @@
#include <linux/dm9000.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
+#include <linux/io.h>
#include <net/ax88796.h>
@@ -34,7 +35,6 @@
#include <mach/bast-cpld.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 21b36573943..98716d0108e 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -20,13 +20,13 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index b0534ad5bc1..82505517846 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -25,9 +25,9 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/timer.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 3a32e1636aa..d8255cf87e4 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -25,7 +26,6 @@
#include <mach/otom-map.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 53ad949ef6c..661807e14e8 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -32,7 +32,7 @@
#include <linux/serial_core.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -43,7 +43,6 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 406cba871c6..152527bb287 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -36,13 +36,13 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 773abd43998..309dcf4c870 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -33,6 +33,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -40,7 +41,6 @@
#include <asm/mach/flash.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 99c82079335..941353af16d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -25,6 +25,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -36,7 +37,6 @@
#include <mach/vr1000-cpld.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index b026cc8dcba..a6970f61319 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,9 +25,9 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index e84c166a6f6..ac79b536c4c 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -19,13 +19,13 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index a8a2c28722b..6078f09b7df 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -21,6 +21,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,7 +33,6 @@
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 8be4cd67738..96d9eb15424 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -31,11 +31,11 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 6038e9f30ad..ba0591e71f3 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -16,10 +16,10 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <mach/dma.h>
-#include <asm/io.h>
#include <plat/dma.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index 936fac7600e..6000ca9d181 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -24,10 +24,10 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
@@ -123,10 +123,10 @@ static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
subsrc &= ~submsk;
if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- desc_handle_irq(IRQ_S3C2412_SDI, irq_desc + IRQ_S3C2412_SDI);
+ generic_handle_irq(IRQ_S3C2412_SDI);
if (subsrc & INTBIT(IRQ_S3C2412_CF))
- desc_handle_irq(IRQ_S3C2412_CF, irq_desc + IRQ_S3C2412_CF);
+ generic_handle_irq(IRQ_S3C2412_CF);
}
#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index cd20dbbf9c2..c719b5a740a 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -27,7 +28,6 @@
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/setup.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 70463ccdb5f..4cfa19ad9be 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
-
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <asm/setup.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 4c988a44d28..217e9e4ed45 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -18,9 +18,9 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 4f18dfc0422..313759c3da6 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -20,6 +20,7 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -27,7 +28,6 @@
#include <mach/hardware.h>
#include <asm/proc-fns.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/reset.h>
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 70aba1e9f7d..d1c29b2537c 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -33,11 +33,11 @@
#include <linux/ioport.h>
#include <linux/mutex.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index a0d49a98209..55404427277 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -15,13 +15,13 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index a23cffbfcce..63c5ab65727 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -24,10 +24,10 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
@@ -44,7 +44,6 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
struct irq_desc *desc)
{
unsigned int subsrc, submsk;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -58,12 +57,10 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
- mydesc = irq_desc + IRQ_S3C2440_WDT;
- desc_handle_irq(IRQ_S3C2440_WDT, mydesc);
+ generic_handle_irq(IRQ_S3C2440_WDT);
}
if (subsrc & 2) {
- mydesc = irq_desc + IRQ_S3C2440_AC97;
- desc_handle_irq(IRQ_S3C2440_AC97, mydesc);
+ generic_handle_irq(IRQ_S3C2440_AC97);
}
}
}
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 1309fbe5854..e2beca47048 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
-
+#include <linux/io.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
@@ -32,7 +32,6 @@
#include <mach/anubis-cpld.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 76b8991dc23..a546307fd53 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -21,6 +21,7 @@
#include <linux/string.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <linux/mtd/map.h>
@@ -30,7 +31,6 @@
#include <asm/setup.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 6de08f935a8..2361d606abc 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/clk.h>
#include <linux/i2c.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -29,7 +30,6 @@
#include <mach/osiris-cpld.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1c91c586f64..4d14c7cff89 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
-
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -34,7 +34,6 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 2bd14a3778d..fefeaaa4155 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -21,13 +21,13 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 52e527eebee..ac1f7ea5f40 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -20,13 +20,13 @@
#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <plat/s3c2440.h>
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 6bd81790c16..ea1aa1f5157 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -33,11 +33,11 @@
#include <linux/ioport.h>
#include <linux/mutex.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 0e849063de7..2f60bf6b8d4 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -31,11 +31,11 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/regs-s3c2443-clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 438a0196088..f73ccb25ff9 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -16,10 +16,10 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <mach/dma.h>
-#include <asm/io.h>
#include <plat/dma.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 0e00809c1e6..0e0d693f397 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -24,10 +24,10 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
@@ -44,7 +44,6 @@ static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
{
unsigned int subsrc, submsk;
unsigned int end;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -57,13 +56,11 @@ static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
subsrc &= (1 << len)-1;
end = len + irq;
- mydesc = irq_desc + irq;
for (; irq < end && subsrc; irq++) {
if (subsrc & 1)
- desc_handle_irq(irq, mydesc);
+ generic_handle_irq(irq);
- mydesc++;
subsrc >>= 1;
}
}
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 4ea77bfb8b0..a7fe65f3dcc 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -21,13 +21,13 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index f1d1f8e158c..bbeddf9ddcb 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -20,13 +20,13 @@
#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/regs-s3c2443-clock.h>
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 3efefbdd252..ab5883b39dd 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -95,19 +95,19 @@ static int __init badge4_sa1111_init(void)
* One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
*/
static struct mtd_partition badge4_partitions[] = {
- {
- .name = "BLOB boot loader",
- .offset = 0,
- .size = 0x0000A000
- }, {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x00006000
- }, {
- .name = "root",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL
- }
+ {
+ .name = "BLOB boot loader",
+ .offset = 0,
+ .size = 0x0000A000
+ }, {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x00006000
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ }
};
static struct flash_platform_data badge4_flash_data = {
@@ -126,7 +126,7 @@ static int five_v_on __initdata = 0;
static int __init five_v_on_setup(char *ignore)
{
- five_v_on = 1;
+ five_v_on = 1;
return 1;
}
__setup("five_v_on", five_v_on_setup);
@@ -171,15 +171,15 @@ static int __init badge4_init(void)
GPCR = BADGE4_GPIO_TESTPT_J7;
GPDR |= BADGE4_GPIO_TESTPT_J7;
- /* 5V supply rail. */
- GPCR = BADGE4_GPIO_PCMEN5V; /* initially off */
- GPDR |= BADGE4_GPIO_PCMEN5V;
+ /* 5V supply rail. */
+ GPCR = BADGE4_GPIO_PCMEN5V; /* initially off */
+ GPDR |= BADGE4_GPIO_PCMEN5V;
/* CPLD sdram type inputs; set up by blob */
//GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
- !!(GPLR & BADGE4_GPIO_SDTYP1),
- !!(GPLR & BADGE4_GPIO_SDTYP0));
+ !!(GPLR & BADGE4_GPIO_SDTYP1),
+ !!(GPLR & BADGE4_GPIO_SDTYP0));
/* SA1111 reset pin; set up by blob */
//GPSR = BADGE4_GPIO_SA1111_NRST;
@@ -205,8 +205,8 @@ static int __init badge4_init(void)
ret = badge4_sa1111_init();
if (ret < 0)
printk(KERN_ERR
- "%s: SA-1111 initialization failed (%d)\n",
- __func__, ret);
+ "%s: SA-1111 initialization failed (%d)\n",
+ __func__, ret);
/* maybe turn on 5v0 from the start */
@@ -254,7 +254,7 @@ EXPORT_SYMBOL(badge4_set_5V);
static struct map_desc badge4_io_desc[] __initdata = {
- { /* SRAM bank 1 */
+ { /* SRAM bank 1 */
.virtual = 0xf1000000,
.pfn = __phys_to_pfn(0x08000000),
.length = 0x00100000,
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index da3a898a6d6..f7fa03478ef 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,6 +88,8 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <asm/cputype.h>
+
#include <mach/hardware.h>
#include "generic.h"
@@ -240,7 +242,7 @@ static struct cpufreq_driver sa1100_driver = {
static int __init sa1100_dram_init(void)
{
- if ((processor_id & CPU_SA1100_MASK) == CPU_SA1100_ID)
+ if (cpu_is_sa1100())
return cpufreq_register_driver(&sa1100_driver);
else
return -ENODEV;
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 029dbfbbafc..3e4fb214ead 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -23,10 +23,11 @@
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/cputype.h>
#include <asm/mach-types.h>
-#include <asm/io.h>
#include <asm/system.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index b422526f6d8..c1fbd5b5f9c 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -42,7 +42,7 @@ EXPORT_SYMBOL(reset_status);
static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
590, /* 59.0 MHz */
737, /* 73.7 MHz */
- 885, /* 88.5 MHz */
+ 885, /* 88.5 MHz */
1032, /* 103.2 MHz */
1180, /* 118.0 MHz */
1327, /* 132.7 MHz */
@@ -52,10 +52,10 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
1917, /* 191.7 MHz */
2064, /* 206.4 MHz */
2212, /* 221.2 MHz */
- 2359, /* 235.9 MHz */
- 2507, /* 250.7 MHz */
- 2654, /* 265.4 MHz */
- 2802 /* 280.2 MHz */
+ 2359, /* 235.9 MHz */
+ 2507, /* 250.7 MHz */
+ 2654, /* 265.4 MHz */
+ 2802 /* 280.2 MHz */
};
#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
@@ -113,7 +113,7 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
#else
/*
* We still need to provide this so building without cpufreq works.
- */
+ */
unsigned int cpufreq_get(unsigned int cpu)
{
return cclk_frequency_100khz[PPCR & 0xf] * 100;
@@ -389,7 +389,7 @@ EXPORT_SYMBOL(sa1100fb_lcd_power);
*/
static struct map_desc standard_io_desc[] __initdata = {
- { /* PCM */
+ { /* PCM */
.virtual = 0xf8000000,
.pfn = __phys_to_pfn(0x80000000),
.length = 0x00100000,
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 62aaf04a390..4f7ea012e1e 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -2054,19 +2054,3 @@
/* active display mode) */
#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
-
-#ifndef __ASSEMBLY__
-extern unsigned int processor_id;
-#endif
-
-#define CPU_REVISION (processor_id & 15)
-#define CPU_SA1110_A0 (0)
-#define CPU_SA1110_B0 (4)
-#define CPU_SA1110_B1 (5)
-#define CPU_SA1110_B2 (6)
-#define CPU_SA1110_B4 (8)
-
-#define CPU_SA1100_ID (0x4401a110)
-#define CPU_SA1100_MASK (0xfffffff0)
-#define CPU_SA1110_ID (0x6901b110)
-#define CPU_SA1110_MASK (0xfffffff0)
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 5976435f42c..b70846c096a 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -36,8 +36,26 @@
#define io_v2p( x ) \
( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+#define CPU_SA1110_A0 (0)
+#define CPU_SA1110_B0 (4)
+#define CPU_SA1110_B1 (5)
+#define CPU_SA1110_B2 (6)
+#define CPU_SA1110_B4 (8)
+
+#define CPU_SA1100_ID (0x4401a110)
+#define CPU_SA1100_MASK (0xfffffff0)
+#define CPU_SA1110_ID (0x6901b110)
+#define CPU_SA1110_MASK (0xfffffff0)
+
#ifndef __ASSEMBLY__
+#include <asm/cputype.h>
+
+#define CPU_REVISION (read_cpuid_id() & 15)
+
+#define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
+#define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
+
# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
# define __PREG(x) (io_v2p((unsigned long)&(x)))
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 29f639e2afc..1c127b68581 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -40,23 +40,21 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
#define __bus_to_virt(x) __phys_to_virt(x)
/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much convenient to use Linux's NUMA support to implement our
- * memory map representation. Assuming all memory nodes have equal access
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much convenient to use Linux's SparseMEM support to implement
+ * our memory map representation. Assuming all memory nodes have equal access
* characteristics, we then have generic discontiguous memory support.
*
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are
- * incidentally the same as virtual addresses.
+ * The sparsemem banks are matched with the physical memory bank addresses
+ * which are incidentally the same as virtual addresses.
*
* node 0: 0xc0000000 - 0xc7ffffff
* node 1: 0xc8000000 - 0xcfffffff
* node 2: 0xd0000000 - 0xd7ffffff
* node 3: 0xd8000000 - 0xdfffffff
*/
-#define NODE_MEM_SIZE_BITS 27
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 27
/*
* Cache flushing area - SA1100 zero bank
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 86369a8f0ce..3093d46a9c6 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -122,14 +122,12 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
GEDR = mask;
irq = IRQ_GPIO11;
- desc = irq_desc + irq;
mask >>= 11;
do {
if (mask & 1)
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
mask >>= 1;
irq++;
- desc++;
} while (mask);
mask = GEDR & 0xfffff800;
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 4856a6bd248..6ccd175bc4c 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -33,8 +33,6 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
unsigned int irr;
while (1) {
- struct irq_desc *d;
-
/*
* Acknowledge the parent IRQ.
*/
@@ -67,21 +65,18 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
desc->chip->ack(irq);
if (irr & IRR_ETHERNET) {
- d = irq_desc + IRQ_NEPONSET_SMC9196;
- desc_handle_irq(IRQ_NEPONSET_SMC9196, d);
+ generic_handle_irq(IRQ_NEPONSET_SMC9196);
}
if (irr & IRR_USAR) {
- d = irq_desc + IRQ_NEPONSET_USAR;
- desc_handle_irq(IRQ_NEPONSET_USAR, d);
+ generic_handle_irq(IRQ_NEPONSET_USAR);
}
desc->chip->unmask(irq);
}
if (irr & IRR_SA1111) {
- d = irq_desc + IRQ_NEPONSET_SA1111;
- desc_handle_irq(IRQ_NEPONSET_SA1111, d);
+ generic_handle_irq(IRQ_NEPONSET_SA1111);
}
}
}
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 83be1c6c5f8..e45d3a1890b 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -8,11 +8,10 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
-
+#include <linux/io.h>
#include <linux/mtd/partitions.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -39,8 +38,8 @@
static struct resource smc91x_resources[] = {
[0] = {
- .start = PLEB_ETH0_P,
- .end = PLEB_ETH0_P | 0x03ffffff,
+ .start = PLEB_ETH0_P,
+ .end = PLEB_ETH0_P | 0x03ffffff,
.flags = IORESOURCE_MEM,
},
#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
@@ -87,15 +86,15 @@ static struct resource pleb_flash_resources[] = {
static struct mtd_partition pleb_partitions[] = {
{
.name = "blob",
- .offset = 0,
+ .offset = 0,
.size = 0x00020000,
}, {
.name = "kernel",
- .offset = MTDPART_OFS_APPEND,
+ .offset = MTDPART_OFS_APPEND,
.size = 0x000e0000,
}, {
.name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
+ .offset = MTDPART_OFS_APPEND,
.size = 0x00300000,
}
};
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 8dd63531795..3c74534f7fe 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -27,7 +28,6 @@
#include <linux/serial_core.h>
#include <linux/ioport.h>
-#include <asm/io.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 641f361c56f..b20ff93b84a 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -17,8 +17,8 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/ssp.h>
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 09d9f33d407..a9400d98445 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -9,10 +9,10 @@
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/serial_8250.h>
+#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/io.h>
#include <asm/leds.h>
#include <asm/param.h>
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index 85aceef6f87..e45bd734a03 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,7 +6,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <asm/io.h>
+#include <linux/io.h>
static void arch_reset(char mode)
{
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 44b0811b400..c04eb6a1e2b 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -11,9 +11,9 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
/*
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index b1896471aa3..8bd8d6bb4d9 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -20,10 +20,10 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/ioport.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
-#include <asm/io.h>
#include <asm/system.h>
#define LED_STATE_ENABLED 1
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index b638f10411e..1553d986dcb 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,11 +28,11 @@
#include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/io.h>
#include <linux/cnt32_to_63.h>
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/hardware/arm_timer.h>
@@ -95,8 +95,7 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc)
irq += IRQ_SIC_START;
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
} while (status);
}
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index 91fa559c7cc..c59e6100c7e 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -21,8 +21,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/platform.h>
static inline void arch_idle(void)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 36f23f89650..7161ba23b58 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -21,9 +21,9 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 76375c64413..bb8ec7724f7 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -23,9 +23,9 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 1725f019fc8..aa051c0884f 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,9 +23,9 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ed15f876c72..d1193884d76 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -428,7 +428,7 @@ config CPU_32v6K
# ARMv7
config CPU_V7
bool "Support ARM V7 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
@@ -735,6 +735,14 @@ config CACHE_FEROCEON_L2
help
This option enables the Feroceon L2 cache controller.
+config CACHE_FEROCEON_L2_WRITETHROUGH
+ bool "Force Feroceon L2 cache write through"
+ depends on CACHE_FEROCEON_L2
+ default n
+ help
+ Say Y here to use the Feroceon L2 cache in writethrough mode.
+ Unless you specifically require this, say N for writeback mode.
+
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 2e27a8c8372..480f78a3611 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux arm-specific parts of the memory manager.
#
-obj-y := consistent.o extable.o fault.o init.o \
+obj-y := dma-mapping.o extable.o fault.o init.o \
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index eb90bce38e1..2e6dc040c65 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -30,3 +30,4 @@ ENTRY(v7_early_abort)
* New designs should not need to patch up faults.
*/
mov pc, lr
+ENDPROC(v7_early_abort)
diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S
index a7cc7f9ee45..625e580945b 100644
--- a/arch/arm/mm/abort-nommu.S
+++ b/arch/arm/mm/abort-nommu.S
@@ -17,3 +17,4 @@ ENTRY(nommu_early_abort)
mov r0, #0 @ clear r0, r1 (no FSR/FAR)
mov r1, #0
mov pc, lr
+ENDPROC(nommu_early_abort)
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index e162cca5917..133e65d166b 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -17,8 +17,8 @@
#include <linux/string.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include "fault.h"
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 7b5a25d8157..13cdae8b0d4 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -48,11 +48,12 @@ static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
* L2 is PIPT and range operations only do a TLB lookup on
* the start address.
*/
- BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+ BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
- __asm__("mcr p15, 1, %0, c15, c9, 4" : : "r" (start));
- __asm__("mcr p15, 1, %0, c15, c9, 5" : : "r" (end));
+ __asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
+ "mcr p15, 1, %1, c15, c9, 5"
+ : : "r" (start), "r" (end));
raw_local_irq_restore(flags);
}
@@ -80,11 +81,12 @@ static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
* L2 is PIPT and range operations only do a TLB lookup on
* the start address.
*/
- BUG_ON((start ^ end) & ~(PAGE_SIZE - 1));
+ BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
- __asm__("mcr p15, 1, %0, c15, c11, 4" : : "r" (start));
- __asm__("mcr p15, 1, %0, c15, c11, 5" : : "r" (end));
+ __asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
+ "mcr p15, 1, %1, c15, c11, 5"
+ : : "r" (start), "r" (end));
raw_local_irq_restore(flags);
}
@@ -205,7 +207,7 @@ static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
* time. These are necessary because the L2 cache can only be enabled
* or disabled while the L1 Dcache and Icache are both disabled.
*/
-static void __init invalidate_and_disable_dcache(void)
+static int __init flush_and_disable_dcache(void)
{
u32 cr;
@@ -217,7 +219,9 @@ static void __init invalidate_and_disable_dcache(void)
flush_cache_all();
set_cr(cr & ~CR_C);
raw_local_irq_restore(flags);
+ return 1;
}
+ return 0;
}
static void __init enable_dcache(void)
@@ -225,18 +229,17 @@ static void __init enable_dcache(void)
u32 cr;
cr = get_cr();
- if (!(cr & CR_C))
- set_cr(cr | CR_C);
+ set_cr(cr | CR_C);
}
static void __init __invalidate_icache(void)
{
int dummy;
- __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0\n" : "=r" (dummy));
+ __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0" : "=r" (dummy));
}
-static void __init invalidate_and_disable_icache(void)
+static int __init invalidate_and_disable_icache(void)
{
u32 cr;
@@ -244,7 +247,9 @@ static void __init invalidate_and_disable_icache(void)
if (cr & CR_I) {
set_cr(cr & ~CR_I);
__invalidate_icache();
+ return 1;
}
+ return 0;
}
static void __init enable_icache(void)
@@ -252,8 +257,7 @@ static void __init enable_icache(void)
u32 cr;
cr = get_cr();
- if (!(cr & CR_I))
- set_cr(cr | CR_I);
+ set_cr(cr | CR_I);
}
static inline u32 read_extra_features(void)
@@ -291,13 +295,17 @@ static void __init enable_l2(void)
u = read_extra_features();
if (!(u & 0x00400000)) {
+ int i, d;
+
printk(KERN_INFO "Feroceon L2: Enabling L2\n");
- invalidate_and_disable_dcache();
- invalidate_and_disable_icache();
+ d = flush_and_disable_dcache();
+ i = invalidate_and_disable_icache();
write_extra_features(u | 0x00400000);
- enable_icache();
- enable_dcache();
+ if (i)
+ enable_icache();
+ if (d)
+ enable_dcache();
}
}
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 76b800a9519..b480f1d3591 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -18,9 +18,9 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#include <asm/hardware/cache-l2x0.h>
#define CACHE_LINE_SIZE 32
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 35ffc4d9599..d19c2bec2b1 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -66,6 +66,7 @@ finished:
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb
mov pc, lr
+ENDPROC(v7_flush_dcache_all)
/*
* v7_flush_cache_all()
@@ -85,6 +86,7 @@ ENTRY(v7_flush_kern_cache_all)
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
ldmfd sp!, {r4-r5, r7, r9-r11, lr}
mov pc, lr
+ENDPROC(v7_flush_kern_cache_all)
/*
* v7_flush_cache_all()
@@ -110,6 +112,8 @@ ENTRY(v7_flush_user_cache_all)
*/
ENTRY(v7_flush_user_cache_range)
mov pc, lr
+ENDPROC(v7_flush_user_cache_all)
+ENDPROC(v7_flush_user_cache_range)
/*
* v7_coherent_kern_range(start,end)
@@ -155,6 +159,8 @@ ENTRY(v7_coherent_user_range)
dsb
isb
mov pc, lr
+ENDPROC(v7_coherent_kern_range)
+ENDPROC(v7_coherent_user_range)
/*
* v7_flush_kern_dcache_page(kaddr)
@@ -174,6 +180,7 @@ ENTRY(v7_flush_kern_dcache_page)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_flush_kern_dcache_page)
/*
* v7_dma_inv_range(start,end)
@@ -202,6 +209,7 @@ ENTRY(v7_dma_inv_range)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_dma_inv_range)
/*
* v7_dma_clean_range(start,end)
@@ -219,6 +227,7 @@ ENTRY(v7_dma_clean_range)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_dma_clean_range)
/*
* v7_dma_flush_range(start,end)
@@ -236,6 +245,7 @@ ENTRY(v7_dma_flush_range)
blo 1b
dsb
mov pc, lr
+ENDPROC(v7_dma_flush_range)
__INITDATA
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 158bd96763d..10b1bae1a25 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -18,10 +18,11 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <asm/system.h>
+#include <asm/cputype.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#define CR_L2 (1 << 26)
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index ded0e96d069..8d33e254934 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -28,7 +28,7 @@
* specific hacks for copying pages efficiently.
*/
#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
- L_PTE_CACHEABLE)
+ L_PTE_MT_MINICACHE)
static DEFINE_SPINLOCK(minicache_lock);
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 3adb79257f4..0e21c076758 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -16,6 +16,7 @@
#include <asm/shmparam.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
#include "mm.h"
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 2e455f82a4d..bad49331bbf 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -30,7 +30,7 @@
#define COPYPAGE_MINICACHE 0xffff8000
#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
- L_PTE_CACHEABLE)
+ L_PTE_MT_MINICACHE)
static DEFINE_SPINLOCK(minicache_lock);
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/dma-mapping.c
index db7b3e38ef1..67960017dc8 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mm/consistent.c
+ * linux/arch/arm/mm/dma-mapping.c
*
* Copyright (C) 2000-2004 Russell King
*
@@ -512,3 +512,105 @@ void dma_cache_maint(const void *start, size_t size, int direction)
}
}
EXPORT_SYMBOL(dma_cache_maint);
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scatter-gather version of the dma_map_single interface.
+ * Here the scatter gather list elements are each tagged with the
+ * appropriate dma address and length. They are obtained via
+ * sg_dma_{address,length}.
+ *
+ * Device ownership issues as mentioned for dma_map_single are the same
+ * here.
+ */
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction dir)
+{
+ struct scatterlist *s;
+ int i, j;
+
+ for_each_sg(sg, s, nents, i) {
+ s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+ s->length, dir);
+ if (dma_mapping_error(dev, s->dma_address))
+ goto bad_mapping;
+ }
+ return nents;
+
+ bad_mapping:
+ for_each_sg(sg, s, i, j)
+ dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+ return 0;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to unmap (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ *
+ * Unmap a set of streaming mode DMA translations. Again, CPU access
+ * rules concerning calls here are the same as for dma_unmap_single().
+ */
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction dir)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i)
+ dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ */
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i) {
+ dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+ sg_dma_len(s), dir);
+ }
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+/**
+ * dma_sync_sg_for_device
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ */
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i) {
+ if (!dmabounce_sync_for_device(dev, sg_dma_address(s), 0,
+ sg_dma_len(s), dir))
+ continue;
+
+ if (!arch_is_coherent())
+ dma_cache_maint(sg_virt(s), s->length, dir);
+ }
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/extable.c b/arch/arm/mm/extable.c
index 9592c3ee4cb..9d285626bc7 100644
--- a/arch/arm/mm/extable.c
+++ b/arch/arm/mm/extable.c
@@ -2,7 +2,7 @@
* linux/arch/arm/mm/extable.c
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
int fixup_exception(struct pt_regs *regs)
{
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index a8ec97b4752..81d0b8772de 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -17,11 +17,13 @@
#include <linux/init.h>
#include <linux/pagemap.h>
+#include <asm/bugs.h>
#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
-static unsigned long shared_pte_mask = L_PTE_CACHEABLE;
+static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
/*
* We take the easy way out of this problem - we make the
@@ -63,9 +65,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
* If this page isn't present, or is already setup to
* fault (ie, is old), we can safely ignore any issues.
*/
- if (ret && pte_val(entry) & shared_pte_mask) {
+ if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
flush_cache_page(vma, address, pte_pfn(entry));
- pte_val(entry) &= ~shared_pte_mask;
+ pte_val(entry) &= ~L_PTE_MT_MASK;
+ pte_val(entry) |= shared_pte_mask;
set_pte_at(vma->vm_mm, address, pte, entry);
flush_tlb_page(vma, address);
}
@@ -197,7 +200,7 @@ void __init check_writebuffer_bugs(void)
unsigned long *p1, *p2;
pgprot_t prot = __pgprot(L_PTE_PRESENT|L_PTE_YOUNG|
L_PTE_DIRTY|L_PTE_WRITE|
- L_PTE_BUFFERABLE);
+ L_PTE_MT_BUFFERABLE);
p1 = vmap(&page, 1, VM_IOREMAP, prot);
p2 = vmap(&page, 1, VM_IOREMAP, prot);
@@ -218,7 +221,7 @@ void __init check_writebuffer_bugs(void)
if (v) {
printk("failed, %s\n", reason);
- shared_pte_mask |= L_PTE_BUFFERABLE;
+ shared_pte_mask = L_PTE_MT_UNCACHED;
} else {
printk("ok\n");
}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 28ad7ab1c0c..2df8d9facf5 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -13,11 +13,11 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/kprobes.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
-#include <asm/uaccess.h>
#include "fault.h"
@@ -72,9 +72,8 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
}
pmd = pmd_offset(pgd, addr);
-#if PTRS_PER_PMD != 1
- printk(", *pmd=%08lx", pmd_val(*pmd));
-#endif
+ if (PTRS_PER_PMD != 1)
+ printk(", *pmd=%08lx", pmd_val(*pmd));
if (pmd_none(*pmd))
break;
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 029ee65fda2..0fa9bf388f0 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -12,6 +12,7 @@
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 30a69d67d67..82c4b421798 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -26,9 +26,42 @@
#include "mm.h"
-extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
-extern unsigned long phys_initrd_start;
-extern unsigned long phys_initrd_size;
+static unsigned long phys_initrd_start __initdata = 0;
+static unsigned long phys_initrd_size __initdata = 0;
+
+static void __init early_initrd(char **p)
+{
+ unsigned long start, size;
+
+ start = memparse(*p, p);
+ if (**p == ',') {
+ size = memparse((*p) + 1, p);
+
+ phys_initrd_start = start;
+ phys_initrd_size = size;
+ }
+}
+__early_param("initrd=", early_initrd);
+
+static int __init parse_tag_initrd(const struct tag *tag)
+{
+ printk(KERN_WARNING "ATAG_INITRD is deprecated; "
+ "please update your bootloader.\n");
+ phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
+ phys_initrd_size = tag->u.initrd.size;
+ return 0;
+}
+
+__tagtable(ATAG_INITRD, parse_tag_initrd);
+
+static int __init parse_tag_initrd2(const struct tag *tag)
+{
+ phys_initrd_start = tag->u.initrd.start;
+ phys_initrd_size = tag->u.initrd.size;
+ return 0;
+}
+
+__tagtable(ATAG_INITRD2, parse_tag_initrd2);
/*
* This is used to pass memory configuration data from paging_init
@@ -36,10 +69,6 @@ extern unsigned long phys_initrd_size;
*/
static struct meminfo meminfo = { 0, };
-#define for_each_nodebank(iter,mi,no) \
- for (iter = 0; iter < mi->nr_banks; iter++) \
- if (mi->bank[iter].node == no)
-
void show_mem(void)
{
int free = 0, total = 0, reserved = 0;
@@ -50,14 +79,15 @@ void show_mem(void)
show_free_areas();
for_each_online_node(node) {
pg_data_t *n = NODE_DATA(node);
- struct page *map = n->node_mem_map - n->node_start_pfn;
+ struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
for_each_nodebank (i,mi,node) {
+ struct membank *bank = &mi->bank[i];
unsigned int pfn1, pfn2;
struct page *page, *end;
- pfn1 = __phys_to_pfn(mi->bank[i].start);
- pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start);
+ pfn1 = bank_pfn_start(bank);
+ pfn2 = bank_pfn_end(bank);
page = map + pfn1;
end = map + pfn2;
@@ -96,17 +126,17 @@ void show_mem(void)
static unsigned int __init
find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
{
- unsigned int start_pfn, bank, bootmap_pfn;
+ unsigned int start_pfn, i, bootmap_pfn;
start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
bootmap_pfn = 0;
- for_each_nodebank(bank, mi, node) {
+ for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
unsigned int start, end;
- start = mi->bank[bank].start >> PAGE_SHIFT;
- end = (mi->bank[bank].size +
- mi->bank[bank].start) >> PAGE_SHIFT;
+ start = bank_pfn_start(bank);
+ end = bank_pfn_end(bank);
if (end < start_pfn)
continue;
@@ -145,13 +175,10 @@ static int __init check_initrd(struct meminfo *mi)
initrd_node = -1;
for (i = 0; i < mi->nr_banks; i++) {
- unsigned long bank_end;
-
- bank_end = mi->bank[i].start + mi->bank[i].size;
-
- if (mi->bank[i].start <= phys_initrd_start &&
- end <= bank_end)
- initrd_node = mi->bank[i].node;
+ struct membank *bank = &mi->bank[i];
+ if (bank_phys_start(bank) <= phys_initrd_start &&
+ end <= bank_phys_end(bank))
+ initrd_node = bank->node;
}
}
@@ -171,19 +198,17 @@ static inline void map_memory_bank(struct membank *bank)
#ifdef CONFIG_MMU
struct map_desc map;
- map.pfn = __phys_to_pfn(bank->start);
- map.virtual = __phys_to_virt(bank->start);
- map.length = bank->size;
+ map.pfn = bank_pfn_start(bank);
+ map.virtual = __phys_to_virt(bank_phys_start(bank));
+ map.length = bank_phys_size(bank);
map.type = MT_MEMORY;
create_mapping(&map);
#endif
}
-static unsigned long __init
-bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
+static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
{
- unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
unsigned long start_pfn, end_pfn, boot_pfn;
unsigned int boot_pages;
pg_data_t *pgdat;
@@ -199,8 +224,8 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
struct membank *bank = &mi->bank[i];
unsigned long start, end;
- start = bank->start >> PAGE_SHIFT;
- end = (bank->start + bank->size) >> PAGE_SHIFT;
+ start = bank_pfn_start(bank);
+ end = bank_pfn_end(bank);
if (start_pfn > start)
start_pfn = start;
@@ -230,8 +255,11 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
pgdat = NODE_DATA(node);
init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
- for_each_nodebank(i, mi, node)
- free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
+ for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
+ free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+ memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
+ }
/*
* Reserve the bootmem bitmap for this node.
@@ -239,31 +267,39 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
- /*
- * Reserve any special node zero regions.
- */
- if (node == 0)
- reserve_node_zero(pgdat);
+ return end_pfn;
+}
+static void __init bootmem_reserve_initrd(int node)
+{
#ifdef CONFIG_BLK_DEV_INITRD
- /*
- * If the initrd is in this node, reserve its memory.
- */
- if (node == initrd_node) {
- int res = reserve_bootmem_node(pgdat, phys_initrd_start,
- phys_initrd_size, BOOTMEM_EXCLUSIVE);
-
- if (res == 0) {
- initrd_start = __phys_to_virt(phys_initrd_start);
- initrd_end = initrd_start + phys_initrd_size;
- } else {
- printk(KERN_ERR
- "INITRD: 0x%08lx+0x%08lx overlaps in-use "
- "memory region - disabling initrd\n",
- phys_initrd_start, phys_initrd_size);
- }
+ pg_data_t *pgdat = NODE_DATA(node);
+ int res;
+
+ res = reserve_bootmem_node(pgdat, phys_initrd_start,
+ phys_initrd_size, BOOTMEM_EXCLUSIVE);
+
+ if (res == 0) {
+ initrd_start = __phys_to_virt(phys_initrd_start);
+ initrd_end = initrd_start + phys_initrd_size;
+ } else {
+ printk(KERN_ERR
+ "INITRD: 0x%08lx+0x%08lx overlaps in-use "
+ "memory region - disabling initrd\n",
+ phys_initrd_start, phys_initrd_size);
}
#endif
+}
+
+static void __init bootmem_free_node(int node, struct meminfo *mi)
+{
+ unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+ unsigned long start_pfn, end_pfn;
+ pg_data_t *pgdat = NODE_DATA(node);
+ int i;
+
+ start_pfn = pgdat->bdata->node_min_pfn;
+ end_pfn = pgdat->bdata->node_low_pfn;
/*
* initialise the zones within this node.
@@ -284,7 +320,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
*/
zhole_size[0] = zone_size[0];
for_each_nodebank(i, mi, node)
- zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+ zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
/*
* Adjust the sizes according to any special requirements for
@@ -293,21 +329,12 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
arch_adjust_zones(node, zone_size, zhole_size);
free_area_init_node(node, zone_size, start_pfn, zhole_size);
-
- return end_pfn;
}
void __init bootmem_init(struct meminfo *mi)
{
unsigned long memend_pfn = 0;
- int node, initrd_node, i;
-
- /*
- * Invalidate the node number for empty or invalid memory banks
- */
- for (i = 0; i < mi->nr_banks; i++)
- if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
- mi->bank[i].node = -1;
+ int node, initrd_node;
memcpy(&meminfo, mi, sizeof(meminfo));
@@ -320,9 +347,19 @@ void __init bootmem_init(struct meminfo *mi)
* Run through each node initialising the bootmem allocator.
*/
for_each_node(node) {
- unsigned long end_pfn;
+ unsigned long end_pfn = bootmem_init_node(node, mi);
- end_pfn = bootmem_init_node(node, initrd_node, mi);
+ /*
+ * Reserve any special node zero regions.
+ */
+ if (node == 0)
+ reserve_node_zero(NODE_DATA(node));
+
+ /*
+ * If the initrd is in this node, reserve its memory.
+ */
+ if (node == initrd_node)
+ bootmem_reserve_initrd(node);
/*
* Remember the highest memory PFN.
@@ -331,6 +368,19 @@ void __init bootmem_init(struct meminfo *mi)
memend_pfn = end_pfn;
}
+ /*
+ * sparse_init() needs the bootmem allocator up and running.
+ */
+ sparse_init();
+
+ /*
+ * Now free memory in each node - free_area_init_node needs
+ * the sparse mem_map arrays initialized by sparse_init()
+ * for memmap_init_zone(), otherwise all PFNs are invalid.
+ */
+ for_each_node(node)
+ bootmem_free_node(node, mi);
+
high_memory = __va(memend_pfn << PAGE_SHIFT);
/*
@@ -401,7 +451,9 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
* information on the command line.
*/
for_each_nodebank(i, mi, node) {
- bank_start = mi->bank[i].start >> PAGE_SHIFT;
+ struct membank *bank = &mi->bank[i];
+
+ bank_start = bank_pfn_start(bank);
if (bank_start < prev_bank_end) {
printk(KERN_ERR "MEM: unordered memory banks. "
"Not freeing memmap.\n");
@@ -415,8 +467,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
if (prev_bank_end && prev_bank_end != bank_start)
free_memmap(node, prev_bank_end, bank_start);
- prev_bank_end = (mi->bank[i].start +
- mi->bank[i].size) >> PAGE_SHIFT;
+ prev_bank_end = bank_pfn_end(bank);
}
}
@@ -461,8 +512,8 @@ void __init mem_init(void)
num_physpages = 0;
for (i = 0; i < meminfo.nr_banks; i++) {
- num_physpages += meminfo.bank[i].size >> PAGE_SHIFT;
- printk(" %ldMB", meminfo.bank[i].size >> 20);
+ num_physpages += bank_pfn_size(&meminfo.bank[i]);
+ printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
}
printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c
index 7429f8c0101..ffad039cbb7 100644
--- a/arch/arm/mm/iomap.c
+++ b/arch/arm/mm/iomap.c
@@ -7,8 +7,7 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#ifdef __io
void __iomem *ioport_map(unsigned long port, unsigned int nr)
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index b81dbf9ffb7..18373f73f2f 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -24,9 +24,10 @@
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
+#include <linux/io.h>
+#include <asm/cputype.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
@@ -55,8 +56,7 @@ static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end,
if (!pte_none(*pte))
goto bad;
- set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot),
- type->prot_pte_ext);
+ set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0);
phys_addr += PAGE_SIZE;
} while (pte++, addr += PAGE_SIZE, addr != end);
return 0;
@@ -332,15 +332,14 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
}
EXPORT_SYMBOL(__arm_ioremap);
-void __iounmap(volatile void __iomem *addr)
+void __iounmap(volatile void __iomem *io_addr)
{
+ void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
#ifndef CONFIG_SMP
struct vm_struct **p, *tmp;
#endif
unsigned int section_mapping = 0;
- addr = (volatile void __iomem *)(PAGE_MASK & (unsigned long)addr);
-
#ifndef CONFIG_SMP
/*
* If this is a section based mapping we need to handle it
@@ -351,7 +350,7 @@ void __iounmap(volatile void __iomem *addr)
*/
write_lock(&vmlist_lock);
for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
- if((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+ if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
if (tmp->flags & VM_ARM_SECTION_MAPPING) {
*p = tmp->next;
unmap_area_sections((unsigned long)tmp->addr,
@@ -366,6 +365,6 @@ void __iounmap(volatile void __iomem *addr)
#endif
if (!section_mapping)
- vunmap((void __force *)addr);
+ vunmap(addr);
}
EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 7647c597fc5..5d9f53907b4 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -18,7 +18,6 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
struct mem_type {
unsigned int prot_pte;
- unsigned int prot_pte_ext;
unsigned int prot_l1;
unsigned int prot_sect;
unsigned int domain;
@@ -35,3 +34,5 @@ struct pglist_data;
void __init create_mapping(struct map_desc *md);
void __init bootmem_init(struct meminfo *mi);
void reserve_node_zero(struct pglist_data *pgdat);
+
+extern void _text, _stext, _etext, __data_start, _end, __init_begin, __init_end;
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 3f6dc40b835..5358fcc7f61 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -6,6 +6,8 @@
#include <linux/mman.h>
#include <linux/shm.h>
#include <linux/sched.h>
+#include <linux/io.h>
+#include <asm/cputype.h>
#include <asm/system.h>
#define COLOUR_ALIGN(addr,pgoff) \
@@ -37,8 +39,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
* caches alias. This is indicated by bits 9 and 21 of the
* cache type register.
*/
- cache_type = read_cpuid(CPUID_CACHETYPE);
- if (cache_type != read_cpuid(CPUID_ID)) {
+ cache_type = read_cpuid_cachetype();
+ if (cache_type != read_cpuid_id()) {
aliasing = (cache_type | cache_type >> 12) & (1 << 11);
if (aliasing)
do_align = filp || flags & MAP_SHARED;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a713e40e1f1..8ba75406455 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
#include <linux/mman.h>
#include <linux/nodemask.h>
+#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/sizes.h>
@@ -27,9 +28,6 @@
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-extern void _stext, _etext, __data_start, _end;
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
@@ -68,27 +66,27 @@ static struct cachepolicy cache_policies[] __initdata = {
.policy = "uncached",
.cr_mask = CR_W|CR_C,
.pmd = PMD_SECT_UNCACHED,
- .pte = 0,
+ .pte = L_PTE_MT_UNCACHED,
}, {
.policy = "buffered",
.cr_mask = CR_C,
.pmd = PMD_SECT_BUFFERED,
- .pte = PTE_BUFFERABLE,
+ .pte = L_PTE_MT_BUFFERABLE,
}, {
.policy = "writethrough",
.cr_mask = 0,
.pmd = PMD_SECT_WT,
- .pte = PTE_CACHEABLE,
+ .pte = L_PTE_MT_WRITETHROUGH,
}, {
.policy = "writeback",
.cr_mask = 0,
.pmd = PMD_SECT_WB,
- .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
+ .pte = L_PTE_MT_WRITEBACK,
}, {
.policy = "writealloc",
.cr_mask = 0,
.pmd = PMD_SECT_WBWA,
- .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
+ .pte = L_PTE_MT_WRITEALLOC,
}
};
@@ -186,35 +184,28 @@ void adjust_cr(unsigned long mask, unsigned long set)
static struct mem_type mem_types[] = {
[MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */
- .prot_pte = PROT_PTE_DEVICE,
+ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
+ L_PTE_SHARED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_UNCACHED,
.domain = DOMAIN_IO,
},
[MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
- .prot_pte = PROT_PTE_DEVICE,
- .prot_pte_ext = PTE_EXT_TEX(2),
+ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_TEX(2),
.domain = DOMAIN_IO,
},
[MT_DEVICE_CACHED] = { /* ioremap_cached */
- .prot_pte = PROT_PTE_DEVICE | L_PTE_CACHEABLE | L_PTE_BUFFERABLE,
+ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB,
.domain = DOMAIN_IO,
},
- [MT_DEVICE_IXP2000] = { /* IXP2400 requires XCB=101 for on-chip I/O */
- .prot_pte = PROT_PTE_DEVICE,
- .prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE |
- PMD_SECT_TEX(1),
- .domain = DOMAIN_IO,
- },
[MT_DEVICE_WC] = { /* ioremap_wc */
- .prot_pte = PROT_PTE_DEVICE,
+ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PROT_SECT_DEVICE,
+ .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE,
.domain = DOMAIN_IO,
},
[MT_CACHECLEAN] = {
@@ -259,7 +250,7 @@ static void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
- unsigned int user_pgprot, kern_pgprot;
+ unsigned int user_pgprot, kern_pgprot, vecs_pgprot;
int cpu_arch = cpu_architecture();
int i;
@@ -277,6 +268,9 @@ static void __init build_mem_type_table(void)
cachepolicy = CPOLICY_WRITEBACK;
ecc_mask = 0;
}
+#ifdef CONFIG_SMP
+ cachepolicy = CPOLICY_WRITEALLOC;
+#endif
/*
* On non-Xscale3 ARMv5-and-older systems, use CB=01
@@ -285,11 +279,8 @@ static void __init build_mem_type_table(void)
* in xsc3 parlance, Uncached Normal in ARMv6 parlance).
*/
if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
- mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
- } else {
- mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
- mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+ mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE;
}
/*
@@ -312,7 +303,15 @@ static void __init build_mem_type_table(void)
}
cp = &cache_policies[cachepolicy];
- kern_pgprot = user_pgprot = cp->pte;
+ vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
+
+#ifndef CONFIG_SMP
+ /*
+ * Only use write-through for non-SMP systems
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
+ vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
+#endif
/*
* Enable CPU-specific coherency if supported.
@@ -340,7 +339,6 @@ static void __init build_mem_type_table(void)
/*
* Mark the device area as "shared device"
*/
- mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
#ifdef CONFIG_SMP
@@ -349,30 +347,21 @@ static void __init build_mem_type_table(void)
*/
user_pgprot |= L_PTE_SHARED;
kern_pgprot |= L_PTE_SHARED;
+ vecs_pgprot |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
#endif
}
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
- v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
- protection_map[i] = __pgprot(v);
+ protection_map[i] = __pgprot(v | user_pgprot);
}
- mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
- mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
+ mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
+ mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
- if (cpu_arch >= CPU_ARCH_ARMv5) {
-#ifndef CONFIG_SMP
- /*
- * Only use write-through for non-SMP systems
- */
- mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
- mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
-#endif
- } else {
+ if (cpu_arch < CPU_ARCH_ARMv5)
mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
- }
pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
@@ -420,8 +409,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
pte = pte_offset_kernel(pmd, addr);
do {
- set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
- type->prot_pte_ext);
+ set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
pfn++;
} while (pte++, addr += PAGE_SIZE, addr != end);
}
@@ -588,12 +576,35 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
create_mapping(io_desc + i);
}
+static unsigned long __initdata vmalloc_reserve = SZ_128M;
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+ vmalloc_reserve = memparse(*arg, arg);
+
+ if (vmalloc_reserve < SZ_16M) {
+ vmalloc_reserve = SZ_16M;
+ printk(KERN_WARNING
+ "vmalloc area too small, limiting to %luMB\n",
+ vmalloc_reserve >> 20);
+ }
+}
+__early_param("vmalloc=", early_vmalloc);
+
+#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
+
static int __init check_membank_valid(struct membank *mb)
{
/*
- * Check whether this memory region has non-zero size.
+ * Check whether this memory region has non-zero size or
+ * invalid node number.
*/
- if (mb->size == 0)
+ if (mb->size == 0 || mb->node >= MAX_NUMNODES)
return 0;
/*
@@ -627,8 +638,7 @@ static int __init check_membank_valid(struct membank *mb)
static void __init sanity_check_meminfo(struct meminfo *mi)
{
- int i;
- int j;
+ int i, j;
for (i = 0, j = 0; i < mi->nr_banks; i++) {
if (check_membank_valid(&mi->bank[i]))
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 63c62fdea52..07b62b23897 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -7,16 +7,14 @@
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#include <asm/page.h>
#include <asm/mach/arch.h>
#include "mm.h"
-extern void _stext, __data_start, _end;
-
/*
* Reserve the various regions of node 0
*/
@@ -43,12 +41,26 @@ void __init reserve_node_zero(pg_data_t *pgdat)
BOOTMEM_DEFAULT);
}
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+ int i, j;
+
+ for (i = 0, j = 0; i < mi->nr_banks; i++) {
+ struct membank *mb = &mi->bank[i];
+
+ if (mb->size != 0 && mb->node < MAX_NUMNODES)
+ mi->bank[j++] = mi->bank[i];
+ }
+ mi->nr_banks = j;
+}
+
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
{
+ sanity_check_meminfo(mi);
bootmem_init(mi);
}
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 5673f4d6113..b5551bf010a 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -29,7 +29,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -399,29 +399,7 @@ ENTRY(cpu_arm1020_switch_mm)
.align 5
ENTRY(cpu_arm1020_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r1, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 4
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 4343fdb0e9e..8bc6740c29e 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -29,7 +29,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -383,29 +383,7 @@ ENTRY(cpu_arm1020e_switch_mm)
.align 5
ENTRY(cpu_arm1020e_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r1, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 2a4ea1659e9..2cd03e66c0a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -365,29 +365,7 @@ ENTRY(cpu_arm1022_switch_mm)
.align 5
ENTRY(cpu_arm1022_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r1, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 77a1babd421..ad961a897f6 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -354,29 +354,7 @@ ENTRY(cpu_arm1026_switch_mm)
.align 5
ENTRY(cpu_arm1026_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r1, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
#ifndef CONFIG_CPU_DCACHE_DISABLE
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index c371fc87776..80d6e1de069 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -15,11 +15,13 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
+
ENTRY(cpu_arm6_dcache_clean_area)
ENTRY(cpu_arm7_dcache_clean_area)
mov pc, lr
@@ -214,30 +216,13 @@ ENTRY(cpu_arm7_switch_mm)
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
- .align 5
+ .align 5
ENTRY(cpu_arm6_set_pte_ext)
ENTRY(cpu_arm7_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young
- movne r2, #0
-
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext wc_disable=0
#endif /* CONFIG_MMU */
- mov pc, lr
+ mov pc, lr
/*
* Function: _arm6_7_reset
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index eda733d3045..85ae18695f1 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -36,7 +36,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
@@ -93,29 +93,12 @@ ENTRY(cpu_arm720_switch_mm)
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
- .align 5
+ .align 5
ENTRY(cpu_arm720_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young
- movne r2, #0
-
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext wc_disable=0
#endif
- mov pc, lr
+ mov pc, lr
/*
* Function: arm720_reset
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 3a57376c8bc..4f95bee63e9 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 7b3ecdeb537..93e05fa7bed 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 28cdb060df4..914d688394f 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -28,7 +28,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -351,33 +351,11 @@ ENTRY(cpu_arm920_switch_mm)
.align 5
ENTRY(cpu_arm920_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r2, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
-#endif /* CONFIG_MMU */
+#endif
mov pc, lr
__INIT
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 94ddcb4a4b7..51c9c9859e5 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -29,7 +29,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -355,29 +355,7 @@ ENTRY(cpu_arm922_switch_mm)
.align 5
ENTRY(cpu_arm922_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r2, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index d045812f339..2724526d89c 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -52,7 +52,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -398,29 +398,7 @@ ENTRY(cpu_arm925_switch_mm)
.align 5
ENTRY(cpu_arm925_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r2, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 4cd33169a7c..54466937bff 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -28,7 +28,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -359,29 +359,7 @@ ENTRY(cpu_arm926_switch_mm)
.align 5
ENTRY(cpu_arm926_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- eor r3, r2, #0x0a @ C & small page?
- tst r3, #0x0b
- biceq r2, r2, #4
-#endif
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext
mov r0, r0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 551244d5ca1..f595117caf5 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -11,7 +11,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 6168c6160de..e03f6ff1fb2 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -13,7 +13,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index c85c1f50e39..be6c11d2b3f 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index f2e5884c513..0fe1f8fc348 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -22,7 +22,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -80,7 +80,8 @@ ENTRY(cpu_feroceon_proc_fin)
msr cpsr_c, ip
bl feroceon_flush_kern_cache_all
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
mov r0, #0
mcr p15, 1, r0, c15, c9, 0 @ clean L2
mcr p15, 0, r0, c7, c10, 4 @ drain WB
@@ -389,7 +390,8 @@ ENTRY(feroceon_range_cache_fns)
.align 5
ENTRY(cpu_feroceon_dcache_clean_area)
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
mov r2, r0
mov r3, r1
#endif
@@ -397,7 +399,8 @@ ENTRY(cpu_feroceon_dcache_clean_area)
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
1: mcr p15, 1, r2, c15, c9, 1 @ clean L2 entry
add r2, r2, #CACHE_DLINESIZE
subs r3, r3, #CACHE_DLINESIZE
@@ -446,27 +449,11 @@ ENTRY(cpu_feroceon_switch_mm)
.align 5
ENTRY(cpu_feroceon_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext wc_disable=0
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
-#if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)
+#if defined(CONFIG_CACHE_FEROCEON_L2) && \
+ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
mcr p15, 1, r0, c15, c9, 1 @ clean L2 entry
#endif
mcr p15, 0, r0, c7, c10, 4 @ drain WB
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index b13150052a7..54b1f721dec 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -71,3 +71,173 @@
mov \reg, #16 @ size offset
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
+
+
+/*
+ * Sanity check the PTE configuration for the code below - which makes
+ * certain assumptions about how these bits are layed out.
+ */
+#if L_PTE_SHARED != PTE_EXT_SHARED
+#error PTE shared bit mismatch
+#endif
+#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
+#error PTE bufferable bit mismatch
+#endif
+#if L_PTE_CACHEABLE != PTE_CACHEABLE
+#error PTE cacheable bit mismatch
+#endif
+#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
+ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#error Invalid Linux PTE bit settings
+#endif
+
+/*
+ * The ARMv6 and ARMv7 set_pte_ext translation function.
+ *
+ * Permission translation:
+ * YUWD APX AP1 AP0 SVC User
+ * 0xxx 0 0 0 no acc no acc
+ * 100x 1 0 1 r/o no acc
+ * 10x0 1 0 1 r/o no acc
+ * 1011 0 0 1 r/w no acc
+ * 110x 0 1 0 r/w r/o
+ * 11x0 0 1 0 r/w r/o
+ * 1111 0 1 1 r/w r/w
+ */
+ .macro armv6_mt_table pfx
+\pfx\()_mt_table:
+ .long 0x00 @ L_PTE_MT_UNCACHED
+ .long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE
+ .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
+ .long PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
+ .long 0x00 @ unused
+ .long 0x00 @ L_PTE_MT_MINICACHE (not present)
+ .long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
+ .long 0x00 @ unused
+ .long PTE_EXT_TEX(1) @ L_PTE_MT_DEV_WC
+ .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
+ .long PTE_EXT_TEX(2) @ L_PTE_MT_DEV_NONSHARED
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+ .endm
+
+ .macro armv6_set_pte_ext pfx
+ str r1, [r0], #-2048 @ linux version
+
+ bic r3, r1, #0x000003fc
+ bic r3, r3, #PTE_TYPE_MASK
+ orr r3, r3, r2
+ orr r3, r3, #PTE_EXT_AP0 | 2
+
+ adr ip, \pfx\()_mt_table
+ and r2, r1, #L_PTE_MT_MASK
+ ldr r2, [ip, r2]
+
+ tst r1, #L_PTE_WRITE
+ tstne r1, #L_PTE_DIRTY
+ orreq r3, r3, #PTE_EXT_APX
+
+ tst r1, #L_PTE_USER
+ orrne r3, r3, #PTE_EXT_AP1
+ tstne r3, #PTE_EXT_APX
+ bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+
+ tst r1, #L_PTE_EXEC
+ orreq r3, r3, #PTE_EXT_XN
+
+ orr r3, r3, r2
+
+ tst r1, #L_PTE_YOUNG
+ tstne r1, #L_PTE_PRESENT
+ moveq r3, #0
+
+ str r3, [r0]
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+ .endm
+
+
+/*
+ * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
+ * covering most CPUs except Xscale and Xscale 3.
+ *
+ * Permission translation:
+ * YUWD AP SVC User
+ * 0xxx 0x00 no acc no acc
+ * 100x 0x00 r/o no acc
+ * 10x0 0x00 r/o no acc
+ * 1011 0x55 r/w no acc
+ * 110x 0xaa r/w r/o
+ * 11x0 0xaa r/w r/o
+ * 1111 0xff r/w r/w
+ */
+ .macro armv3_set_pte_ext wc_disable=1
+ str r1, [r0], #-2048 @ linux version
+
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r3, #L_PTE_USER @ user?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
+ movne r2, #0
+
+ .if \wc_disable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r2, #PTE_CACHEABLE
+ bicne r2, r2, #PTE_BUFFERABLE
+#endif
+ .endif
+ str r2, [r0] @ hardware version
+ .endm
+
+
+/*
+ * Xscale set_pte_ext translation, split into two halves to cope
+ * with work-arounds. r3 must be preserved by code between these
+ * two macros.
+ *
+ * Permission translation:
+ * YUWD AP SVC User
+ * 0xxx 00 no acc no acc
+ * 100x 00 r/o no acc
+ * 10x0 00 r/o no acc
+ * 1011 01 r/w no acc
+ * 110x 10 r/w r/o
+ * 11x0 10 r/w r/o
+ * 1111 11 r/w r/w
+ */
+ .macro xscale_set_pte_ext_prologue
+ str r1, [r0], #-2048 @ linux version
+
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
+ orr r2, r2, #PTE_TYPE_EXT @ extended page
+
+ tst r3, #L_PTE_USER @ user?
+ orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
+
+ tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
+ orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
+ @ combined with user -> user r/w
+ .endm
+
+ .macro xscale_set_pte_ext_epilogue
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
+ movne r2, #0 @ no -> fault
+
+ str r2, [r0] @ hardware version
+ mov ip, #0
+ mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ .endm
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index bbe10576c86..90a7e5279f2 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <mach/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
@@ -153,24 +153,7 @@ ENTRY(cpu_sa110_switch_mm)
.align 5
ENTRY(cpu_sa110_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext wc_disable=0
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 871ba018252..451e2d953e2 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -22,7 +22,7 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <mach/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
@@ -166,24 +166,7 @@ ENTRY(cpu_sa1100_switch_mm)
.align 5
ENTRY(cpu_sa1100_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- bic r2, r1, #PTE_SMALL_AP_MASK
- bic r2, r2, #PTE_TYPE_MASK
- orr r2, r2, #PTE_TYPE_SMALL
-
- tst r1, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-
- tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-
- tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0
-
- str r2, [r0] @ hardware version
+ armv3_set_pte_ext wc_disable=0
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 5702ec58b2a..294943b8597 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -13,7 +13,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
@@ -114,46 +114,12 @@ ENTRY(cpu_v6_switch_mm)
* (hardware version is stored at -1024 bytes)
* - pte - PTE value to store
* - ext - value for extended PTE bits
- *
- * Permissions:
- * YUWD APX AP1 AP0 SVC User
- * 0xxx 0 0 0 no acc no acc
- * 100x 1 0 1 r/o no acc
- * 10x0 1 0 1 r/o no acc
- * 1011 0 0 1 r/w no acc
- * 110x 0 1 0 r/w r/o
- * 11x0 0 1 0 r/w r/o
- * 1111 0 1 1 r/w r/w
*/
+ armv6_mt_table cpu_v6
+
ENTRY(cpu_v6_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
-
- bic r3, r1, #0x000003f0
- bic r3, r3, #0x00000003
- orr r3, r3, r2
- orr r3, r3, #PTE_EXT_AP0 | 2
-
- tst r1, #L_PTE_WRITE
- tstne r1, #L_PTE_DIRTY
- orreq r3, r3, #PTE_EXT_APX
-
- tst r1, #L_PTE_USER
- orrne r3, r3, #PTE_EXT_AP1
- tstne r3, #PTE_EXT_APX
- bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-
- tst r1, #L_PTE_YOUNG
- biceq r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
-
- tst r1, #L_PTE_EXEC
- orreq r3, r3, #PTE_EXT_XN
-
- tst r1, #L_PTE_PRESENT
- moveq r3, #0
-
- str r3, [r0]
- mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+ armv6_set_pte_ext cpu_v6
#endif
mov pc, lr
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index b49f9a4c82c..34e42404192 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -12,7 +12,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
@@ -25,9 +25,11 @@
ENTRY(cpu_v7_proc_init)
mov pc, lr
+ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
mov pc, lr
+ENDPROC(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc)
@@ -43,6 +45,7 @@ ENTRY(cpu_v7_proc_fin)
.align 5
ENTRY(cpu_v7_reset)
mov pc, r0
+ENDPROC(cpu_v7_reset)
/*
* cpu_v7_do_idle()
@@ -52,8 +55,9 @@ ENTRY(cpu_v7_reset)
* IRQs are already disabled.
*/
ENTRY(cpu_v7_do_idle)
- .long 0xe320f003 @ ARM V7 WFI instruction
+ wfi
mov pc, lr
+ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
#ifndef TLB_CAN_READ_FROM_L1_CACHE
@@ -65,6 +69,7 @@ ENTRY(cpu_v7_dcache_clean_area)
dsb
#endif
mov pc, lr
+ENDPROC(cpu_v7_dcache_clean_area)
/*
* cpu_v7_switch_mm(pgd_phys, tsk)
@@ -89,6 +94,7 @@ ENTRY(cpu_v7_switch_mm)
isb
#endif
mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
/*
* cpu_v7_set_pte_ext(ptep, pte)
@@ -99,26 +105,19 @@ ENTRY(cpu_v7_switch_mm)
* (hardware version is stored at -1024 bytes)
* - pte - PTE value to store
* - ext - value for extended PTE bits
- *
- * Permissions:
- * YUWD APX AP1 AP0 SVC User
- * 0xxx 0 0 0 no acc no acc
- * 100x 1 0 1 r/o no acc
- * 10x0 1 0 1 r/o no acc
- * 1011 0 0 1 r/w no acc
- * 110x 0 1 0 r/w r/o
- * 11x0 0 1 0 r/w r/o
- * 1111 0 1 1 r/w r/w
*/
ENTRY(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
bic r3, r1, #0x000003f0
- bic r3, r3, #0x00000003
+ bic r3, r3, #PTE_TYPE_MASK
orr r3, r3, r2
orr r3, r3, #PTE_EXT_AP0 | 2
+ tst r2, #1 << 4
+ orrne r3, r3, #PTE_EXT_TEX(1)
+
tst r1, #L_PTE_WRITE
tstne r1, #L_PTE_DIRTY
orreq r3, r3, #PTE_EXT_APX
@@ -128,19 +127,18 @@ ENTRY(cpu_v7_set_pte_ext)
tstne r3, #PTE_EXT_APX
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
- tst r1, #L_PTE_YOUNG
- biceq r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
-
tst r1, #L_PTE_EXEC
orreq r3, r3, #PTE_EXT_XN
- tst r1, #L_PTE_PRESENT
+ tst r1, #L_PTE_YOUNG
+ tstne r1, #L_PTE_PRESENT
moveq r3, #0
str r3, [r0]
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
#endif
mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
cpu_v7_name:
.ascii "ARMv7 Processor"
@@ -182,12 +180,17 @@ __v7_setup:
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
#endif
+ ldr r5, =0x40e040e0
+ ldr r6, =0xff0aa1a8
+ mcr p15, 0, r5, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r6, c10, c2, 1 @ write NMRR
adr r5, v7_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
mov pc, lr @ return to head.S:__ret
+ENDPROC(__v7_setup)
/*
* V X F I D LR
@@ -197,7 +200,7 @@ __v7_setup:
*/
.type v7_crval, #object
v7_crval:
- crval clear=0x0120c302, mmuset=0x00c0387d, ucset=0x00c0187c
+ crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
__v7_setup_stack:
.space 4 * 11 @ 11 registers
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 7bd9e7197f6..04dc8b65401 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -27,7 +27,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <mach/hardware.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
@@ -345,38 +345,38 @@ ENTRY(cpu_xsc3_switch_mm)
* cpu_xsc3_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
- *
*/
+cpu_xsc3_mt_table:
+ .long 0x00 @ L_PTE_MT_UNCACHED
+ .long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE
+ .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
+ .long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
+ .long 0x00 @ unused
+ .long 0x00 @ L_PTE_MT_MINICACHE (not present)
+ .long PTE_EXT_TEX(5) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC (not present?)
+ .long 0x00 @ unused
+ .long PTE_EXT_TEX(1) @ L_PTE_MT_DEV_WC
+ .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
+ .long PTE_EXT_TEX(2) @ L_PTE_MT_DEV_NONSHARED
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+
.align 5
ENTRY(cpu_xsc3_set_pte_ext)
- str r1, [r0], #-2048 @ linux version
+ xscale_set_pte_ext_prologue
- bic r2, r1, #0xff0 @ keep C, B bits
- orr r2, r2, #PTE_TYPE_EXT @ extended page
tst r1, #L_PTE_SHARED @ shared?
- orrne r2, r2, #0x200
-
- eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- tst r3, #L_PTE_USER @ user?
- orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
-
- tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
- orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
- @ combined with user -> user r/w
-
- @ If it's cacheable, it needs to be in L2 also.
- eor ip, r1, #L_PTE_CACHEABLE
- tst ip, #L_PTE_CACHEABLE
- orreq r2, r2, #PTE_EXT_TEX(0x5)
-
- tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
- movne r2, #0 @ no -> fault
-
- str r2, [r0] @ hardware version
- mov ip, #0
- mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
- mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ and r1, r1, #L_PTE_MT_MASK
+ adr ip, cpu_xsc3_mt_table
+ ldr ip, [ip, r1]
+ orrne r2, r2, #PTE_EXT_COHERENT @ interlock: mask in coherent bit
+ bic r2, r2, #0x0c @ clear old C,B bits
+ orr r2, r2, ip
+
+ xscale_set_pte_ext_epilogue
mov pc, lr
.ltorg
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2dd85273976..0cce37b9393 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -23,7 +23,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/elf.h>
+#include <asm/hwcap.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
@@ -406,8 +406,6 @@ ENTRY(cpu_xscale_dcache_clean_area)
/* =============================== PageTable ============================== */
-#define PTE_CACHE_WRITE_ALLOCATE 0
-
/*
* cpu_xscale_switch_mm(pgd)
*
@@ -431,56 +429,42 @@ ENTRY(cpu_xscale_switch_mm)
*
* Errata 40: must set memory to write-through for user read-only pages.
*/
+cpu_xscale_mt_table:
+ .long 0x00 @ L_PTE_MT_UNCACHED
+ .long PTE_BUFFERABLE @ L_PTE_MT_BUFFERABLE
+ .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
+ .long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
+ .long 0x00 @ unused
+ .long PTE_EXT_TEX(1) | PTE_CACHEABLE @ L_PTE_MT_MINICACHE
+ .long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
+ .long 0x00 @ unused
+ .long PTE_BUFFERABLE @ L_PTE_MT_DEV_WC
+ .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
+ .long 0x00 @ L_PTE_MT_DEV_NONSHARED
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+
.align 5
ENTRY(cpu_xscale_set_pte_ext)
- str r1, [r0], #-2048 @ linux version
-
- bic r2, r1, #0xff0
- orr r2, r2, #PTE_TYPE_EXT @ extended page
-
- eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
- tst r3, #L_PTE_USER @ User?
- orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
-
- tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
- orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
- @ combined with user -> user r/w
-
- @
- @ Handle the X bit. We want to set this bit for the minicache
- @ (U = E = B = W = 0, C = 1) or when write allocate is enabled,
- @ and we have a writeable, cacheable region. If we ignore the
- @ U and E bits, we can allow user space to use the minicache as
- @ well.
- @
- @ X = (C & ~W & ~B) | (C & W & B & write_allocate)
- @
- eor ip, r1, #L_PTE_CACHEABLE
- tst ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
-#if PTE_CACHE_WRITE_ALLOCATE
- eorne ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
- tstne ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
-#endif
- orreq r2, r2, #PTE_EXT_TEX(1)
+ xscale_set_pte_ext_prologue
@
- @ Erratum 40: The B bit must be cleared for a user read-only
- @ cacheable page.
- @
- @ B = B & ~(U & C & ~W)
+ @ Erratum 40: must set memory to write-through for user read-only pages
@
- and ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE
- teq ip, #L_PTE_USER | L_PTE_CACHEABLE
- biceq r2, r2, #PTE_BUFFERABLE
+ and ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_WRITE) & ~(4 << 2)
+ teq ip, #L_PTE_MT_WRITEBACK | L_PTE_USER
- tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
- movne r2, #0 @ no -> fault
+ moveq r1, #L_PTE_MT_WRITETHROUGH
+ and r1, r1, #L_PTE_MT_MASK
+ adr ip, cpu_xscale_mt_table
+ ldr ip, [ip, r1]
+ bic r2, r2, #0x0c
+ orr r2, r2, ip
- str r2, [r0] @ hardware version
- mov ip, #0
- mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ xscale_set_pte_ext_epilogue
mov pc, lr
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b56dda8052f..24ba5109f2e 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -51,6 +51,7 @@ ENTRY(v7wbi_flush_user_tlb_range)
mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
dsb
mov pc, lr
+ENDPROC(v7wbi_flush_user_tlb_range)
/*
* v7wbi_flush_kern_tlb_range(start,end)
@@ -77,6 +78,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
dsb
isb
mov pc, lr
+ENDPROC(v7wbi_flush_kern_tlb_range)
.section ".text.init", #alloc, #execinstr
diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c
index 79f8e67cc6c..d31c49f953b 100644
--- a/arch/arm/nwfpe/fpa11_cpdt.c
+++ b/arch/arm/nwfpe/fpa11_cpdt.c
@@ -26,7 +26,7 @@
#include "fpmodule.h"
#include "fpmodule.inl"
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
static inline void loadSingle(const unsigned int Fn, const unsigned int __user *pMem)
{
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index e61d0cc520b..88e31f549f5 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -11,3 +11,4 @@ oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o
oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o
oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o
+oprofile-$(CONFIG_OPROFILE_ARMV7) += op_model_v7.o
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index f5ebf30151f..cefc21c2eee 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -16,8 +16,8 @@
#include <linux/oprofile.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/uaccess.h>
#include <asm/ptrace.h>
-#include <asm/uaccess.h>
#include "../kernel/stacktrace.h"
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 0a5cf3a6438..3fcd752d614 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -145,6 +145,10 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
spec = &op_mpcore_spec;
#endif
+#ifdef CONFIG_OPROFILE_ARMV7
+ spec = &op_armv7_spec;
+#endif
+
if (spec) {
ret = spec->init();
if (ret < 0)
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 4899c629aa0..8c4e4f6a1de 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,7 @@ extern struct op_arm_model_spec op_xscale_spec;
extern struct op_arm_model_spec op_armv6_spec;
extern struct op_arm_model_spec op_mpcore_spec;
+extern struct op_arm_model_spec op_armv7_spec;
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 92db6e035c6..4de366e8b4c 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -36,8 +36,8 @@
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
new file mode 100644
index 00000000000..f20295f14ad
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v7.c
@@ -0,0 +1,411 @@
+/**
+ * op_model_v7.c
+ * ARM V7 (Cortex A8) Event Monitor Driver
+ *
+ * Copyright 2008 Jean Pihet <jpihet@mvista.com>
+ * Copyright 2004 ARM SMP Development Team
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_v7.h"
+
+/* #define DEBUG */
+
+
+/*
+ * ARM V7 PMNC support
+ */
+
+static u32 cnt_en[CNTMAX];
+
+static inline void armv7_pmnc_write(u32 val)
+{
+ val &= PMNC_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
+}
+
+static inline u32 armv7_pmnc_read(void)
+{
+ u32 val;
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+ return val;
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
+{
+ u32 val;
+
+ if (cnt >= CNTMAX) {
+ printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), cnt);
+ return -1;
+ }
+
+ if (cnt == CCNT)
+ val = CNTENS_C;
+ else
+ val = (1 << (cnt - CNT0));
+
+ val &= CNTENS_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+ return cnt;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
+{
+ u32 val;
+
+ if (cnt >= CNTMAX) {
+ printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), cnt);
+ return -1;
+ }
+
+ if (cnt == CCNT)
+ val = CNTENC_C;
+ else
+ val = (1 << (cnt - CNT0));
+
+ val &= CNTENC_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+ return cnt;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
+{
+ u32 val;
+
+ if (cnt >= CNTMAX) {
+ printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), cnt);
+ return -1;
+ }
+
+ if (cnt == CCNT)
+ val = INTENS_C;
+ else
+ val = (1 << (cnt - CNT0));
+
+ val &= INTENS_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+ return cnt;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+ u32 val;
+
+ /* Read */
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+ /* Write to clear flags */
+ val &= FLAG_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+ return val;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int cnt)
+{
+ u32 val;
+
+ if ((cnt == CCNT) || (cnt >= CNTMAX)) {
+ printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
+ " %d\n", smp_processor_id(), cnt);
+ return -1;
+ }
+
+ val = (cnt - CNT0) & SELECT_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+ return cnt;
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
+{
+ if (armv7_pmnc_select_counter(cnt) == cnt) {
+ val &= EVTSEL_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+ }
+}
+
+static void armv7_pmnc_reset_counter(unsigned int cnt)
+{
+ u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
+ u32 val = -(u32)counter_config[cpu_cnt].count;
+
+ switch (cnt) {
+ case CCNT:
+ armv7_pmnc_disable_counter(cnt);
+
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
+
+ if (cnt_en[cnt] != 0)
+ armv7_pmnc_enable_counter(cnt);
+
+ break;
+
+ case CNT0:
+ case CNT1:
+ case CNT2:
+ case CNT3:
+ armv7_pmnc_disable_counter(cnt);
+
+ if (armv7_pmnc_select_counter(cnt) == cnt)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
+
+ if (cnt_en[cnt] != 0)
+ armv7_pmnc_enable_counter(cnt);
+
+ break;
+
+ default:
+ printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
+ " %d\n", smp_processor_id(), cnt);
+ break;
+ }
+}
+
+int armv7_setup_pmnc(void)
+{
+ unsigned int cnt;
+
+ if (armv7_pmnc_read() & PMNC_E) {
+ printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
+ " new event counter.\n", smp_processor_id());
+ return -EBUSY;
+ }
+
+ /*
+ * Initialize & Reset PMNC: C bit, D bit and P bit.
+ * Note: Using a slower count for CCNT (D bit: divide by 64) results
+ * in a more stable system
+ */
+ armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D);
+
+
+ for (cnt = CCNT; cnt < CNTMAX; cnt++) {
+ unsigned long event;
+ u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(cnt);
+ cnt_en[cnt] = 0;
+
+ if (!counter_config[cpu_cnt].enabled)
+ continue;
+
+ event = counter_config[cpu_cnt].event & 255;
+
+ /*
+ * Set event (if destined for PMNx counters)
+ * We don't need to set the event if it's a cycle count
+ */
+ if (cnt != CCNT)
+ armv7_pmnc_write_evtsel(cnt, event);
+
+ /*
+ * Enable interrupt for this counter
+ */
+ armv7_pmnc_enable_intens(cnt);
+
+ /*
+ * Reset counter
+ */
+ armv7_pmnc_reset_counter(cnt);
+
+ /*
+ * Enable counter
+ */
+ armv7_pmnc_enable_counter(cnt);
+ cnt_en[cnt] = 1;
+ }
+
+ return 0;
+}
+
+static inline void armv7_start_pmnc(void)
+{
+ armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
+}
+
+static inline void armv7_stop_pmnc(void)
+{
+ armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
+}
+
+/*
+ * CPU counters' IRQ handler (one IRQ per CPU)
+ */
+static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned int cnt;
+ u32 flags;
+
+
+ /*
+ * Stop IRQ generation
+ */
+ armv7_stop_pmnc();
+
+ /*
+ * Get and reset overflow status flags
+ */
+ flags = armv7_pmnc_getreset_flags();
+
+ /*
+ * Cycle counter
+ */
+ if (flags & FLAG_C) {
+ u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
+ armv7_pmnc_reset_counter(CCNT);
+ oprofile_add_sample(regs, cpu_cnt);
+ }
+
+ /*
+ * PMNC counters 0:3
+ */
+ for (cnt = CNT0; cnt < CNTMAX; cnt++) {
+ if (flags & (1 << (cnt - CNT0))) {
+ u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
+ armv7_pmnc_reset_counter(cnt);
+ oprofile_add_sample(regs, cpu_cnt);
+ }
+ }
+
+ /*
+ * Allow IRQ generation
+ */
+ armv7_start_pmnc();
+
+ return IRQ_HANDLED;
+}
+
+int armv7_request_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for (i = 0; i < nr; i++) {
+ ret = request_irq(irqs[i], armv7_pmnc_interrupt,
+ IRQF_DISABLED, "CP15 PMNC", NULL);
+ if (ret != 0) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u"
+ " for ARMv7\n",
+ irqs[i]);
+ break;
+ }
+ }
+
+ if (i != nr)
+ while (i-- != 0)
+ free_irq(irqs[i], NULL);
+
+ return ret;
+}
+
+void armv7_release_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+
+ for (i = 0; i < nr; i++)
+ free_irq(irqs[i], NULL);
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+ u32 val;
+ unsigned int cnt;
+
+ printk(KERN_INFO "PMNC registers dump:\n");
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+ printk(KERN_INFO "PMNC =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+ printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+ printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+ printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+ printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+ printk(KERN_INFO "CCNT =0x%08x\n", val);
+
+ for (cnt = CNT0; cnt < CNTMAX; cnt++) {
+ armv7_pmnc_select_counter(cnt);
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
+ asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
+ }
+}
+#endif
+
+
+static int irqs[] = {
+#ifdef CONFIG_ARCH_OMAP3
+ INT_34XX_BENCH_MPU_EMUL,
+#endif
+};
+
+static void armv7_pmnc_stop(void)
+{
+#ifdef DEBUG
+ armv7_pmnc_dump_regs();
+#endif
+ armv7_stop_pmnc();
+ armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
+}
+
+static int armv7_pmnc_start(void)
+{
+ int ret;
+
+#ifdef DEBUG
+ armv7_pmnc_dump_regs();
+#endif
+ ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
+ if (ret >= 0)
+ armv7_start_pmnc();
+
+ return ret;
+}
+
+static int armv7_detect_pmnc(void)
+{
+ return 0;
+}
+
+struct op_arm_model_spec op_armv7_spec = {
+ .init = armv7_detect_pmnc,
+ .num_counters = 5,
+ .setup_ctrs = armv7_setup_pmnc,
+ .start = armv7_pmnc_start,
+ .stop = armv7_pmnc_stop,
+ .name = "arm/armv7",
+};
diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
new file mode 100644
index 00000000000..0e19bcc2e10
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v7.h
@@ -0,0 +1,103 @@
+/**
+ * op_model_v7.h
+ * ARM v7 (Cortex A8) Event Monitor Driver
+ *
+ * Copyright 2008 Jean Pihet <jpihet@mvista.com>
+ * Copyright 2004 ARM SMP Development Team
+ * Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * Copyright 2000-2004 MontaVista Software Inc
+ * Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * Copyright 2004 Intel Corporation
+ * Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * Copyright 2004 Oprofile Authors
+ *
+ * Read the file COPYING
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OP_MODEL_V7_H
+#define OP_MODEL_V7_H
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define PMNC_E (1 << 0) /* Enable all counters */
+#define PMNC_P (1 << 1) /* Reset all counters */
+#define PMNC_C (1 << 2) /* Cycle counter reset */
+#define PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
+#define PMNC_X (1 << 4) /* Export to ETM */
+#define PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
+#define PMNC_MASK 0x3f /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define CCNT 0
+#define CNT0 1
+#define CNT1 2
+#define CNT2 3
+#define CNT3 4
+#define CNTMAX 5
+
+#define CPU_COUNTER(cpu, counter) ((cpu) * CNTMAX + (counter))
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define CNTENS_P0 (1 << 0)
+#define CNTENS_P1 (1 << 1)
+#define CNTENS_P2 (1 << 2)
+#define CNTENS_P3 (1 << 3)
+#define CNTENS_C (1 << 31)
+#define CNTENS_MASK 0x8000000f /* Mask for writable bits */
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define CNTENC_P0 (1 << 0)
+#define CNTENC_P1 (1 << 1)
+#define CNTENC_P2 (1 << 2)
+#define CNTENC_P3 (1 << 3)
+#define CNTENC_C (1 << 31)
+#define CNTENC_MASK 0x8000000f /* Mask for writable bits */
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define INTENS_P0 (1 << 0)
+#define INTENS_P1 (1 << 1)
+#define INTENS_P2 (1 << 2)
+#define INTENS_P3 (1 << 3)
+#define INTENS_C (1 << 31)
+#define INTENS_MASK 0x8000000f /* Mask for writable bits */
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define EVTSEL_MASK 0x7f /* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define SELECT_MASK 0x1f /* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define FLAG_P0 (1 << 0)
+#define FLAG_P1 (1 << 1)
+#define FLAG_P2 (1 << 2)
+#define FLAG_P3 (1 << 3)
+#define FLAG_C (1 << 31)
+#define FLAG_MASK 0x8000000f /* Mask for writable bits */
+
+
+int armv7_setup_pmu(void);
+int armv7_start_pmu(void);
+int armv7_stop_pmu(void);
+int armv7_request_interrupts(int *, int);
+void armv7_release_interrupts(int *, int);
+
+#endif
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
index 7c3289c2acd..724ab9ce252 100644
--- a/arch/arm/oprofile/op_model_xscale.c
+++ b/arch/arm/oprofile/op_model_xscale.c
@@ -22,7 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <asm/system.h>
+#include <asm/cputype.h>
#include "op_counter.h"
#include "op_arm_model.h"
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index 6dcbcc4ad41..4efe392859e 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -18,7 +18,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index 39dcfb4bdc7..ed0bbece0d6 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,8 +18,8 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
unsigned int mtype)
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 54708bf9cb1..77fa7cc7d16 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -17,7 +17,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <asm/signal.h>
#include <asm/system.h>
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index c53fefb6aac..3695bbe3ee2 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,8 +18,8 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index e14eaad11dd..b2a7e3fad11 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -23,4 +23,15 @@ source "arch/arm/mach-mx3/Kconfig"
endmenu
+config MXC_IRQ_PRIOR
+ bool "Use IRQ priority"
+ depends on ARCH_MXC
+ help
+ Select this if you want to use prioritized IRQ handling.
+ This feature prevents higher priority ISR to be interrupted
+ by lower priority IRQ even IRQF_DISABLED flag is not set.
+ This may be useful in embedded applications, where are strong
+ requirements for timing.
+ Say N here, unless you have a specialized requirement.
+
endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index db66e9ae841..067556f7c91 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := irq.o clock.o gpio.o time.o
+obj-y := irq.o clock.o gpio.o time.o devices.o
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
new file mode 100644
index 00000000000..c66748267c4
--- /dev/null
+++ b/arch/arm/plat-mxc/devices.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+int __init mxc_register_device(struct platform_device *pdev, void *data)
+{
+ int ret;
+
+ pdev->dev.platform_data = data;
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ pr_debug("Unable to register platform device '%s': %d\n",
+ pdev->name, ret);
+
+ return ret;
+}
+
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
new file mode 100644
index 00000000000..b296f19fd89
--- /dev/null
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -0,0 +1,840 @@
+/*
+ * linux/arch/arm/plat-mxc/dma-mx1-mx2.c
+ *
+ * i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/dma.h>
+#include <mach/dma-mx1-mx2.h>
+
+#define DMA_DCR 0x00 /* Control Register */
+#define DMA_DISR 0x04 /* Interrupt status Register */
+#define DMA_DIMR 0x08 /* Interrupt mask Register */
+#define DMA_DBTOSR 0x0c /* Burst timeout status Register */
+#define DMA_DRTOSR 0x10 /* Request timeout Register */
+#define DMA_DSESR 0x14 /* Transfer Error Status Register */
+#define DMA_DBOSR 0x18 /* Buffer overflow status Register */
+#define DMA_DBTOCR 0x1c /* Burst timeout control Register */
+#define DMA_WSRA 0x40 /* W-Size Register A */
+#define DMA_XSRA 0x44 /* X-Size Register A */
+#define DMA_YSRA 0x48 /* Y-Size Register A */
+#define DMA_WSRB 0x4c /* W-Size Register B */
+#define DMA_XSRB 0x50 /* X-Size Register B */
+#define DMA_YSRB 0x54 /* Y-Size Register B */
+#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */
+#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */
+#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */
+#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */
+#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */
+#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */
+#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */
+#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */
+#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */
+
+#define DCR_DRST (1<<1)
+#define DCR_DEN (1<<0)
+#define DBTOCR_EN (1<<15)
+#define DBTOCR_CNT(x) ((x) & 0x7fff)
+#define CNTR_CNT(x) ((x) & 0xffffff)
+#define CCR_ACRPT (1<<14)
+#define CCR_DMOD_LINEAR (0x0 << 12)
+#define CCR_DMOD_2D (0x1 << 12)
+#define CCR_DMOD_FIFO (0x2 << 12)
+#define CCR_DMOD_EOBFIFO (0x3 << 12)
+#define CCR_SMOD_LINEAR (0x0 << 10)
+#define CCR_SMOD_2D (0x1 << 10)
+#define CCR_SMOD_FIFO (0x2 << 10)
+#define CCR_SMOD_EOBFIFO (0x3 << 10)
+#define CCR_MDIR_DEC (1<<9)
+#define CCR_MSEL_B (1<<8)
+#define CCR_DSIZ_32 (0x0 << 6)
+#define CCR_DSIZ_8 (0x1 << 6)
+#define CCR_DSIZ_16 (0x2 << 6)
+#define CCR_SSIZ_32 (0x0 << 4)
+#define CCR_SSIZ_8 (0x1 << 4)
+#define CCR_SSIZ_16 (0x2 << 4)
+#define CCR_REN (1<<3)
+#define CCR_RPT (1<<2)
+#define CCR_FRC (1<<1)
+#define CCR_CEN (1<<0)
+#define RTOR_EN (1<<15)
+#define RTOR_CLK (1<<14)
+#define RTOR_PSC (1<<13)
+
+/*
+ * struct imx_dma_channel - i.MX specific DMA extension
+ * @name: name specified by DMA client
+ * @irq_handler: client callback for end of transfer
+ * @err_handler: client callback for error condition
+ * @data: clients context data for callbacks
+ * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
+ * @sg: pointer to the actual read/written chunk for scatter-gather emulation
+ * @resbytes: total residual number of bytes to transfer
+ * (it can be lower or same as sum of SG mapped chunk sizes)
+ * @sgcount: number of chunks to be read/written
+ *
+ * Structure is used for IMX DMA processing. It would be probably good
+ * @struct dma_struct in the future for external interfacing and use
+ * @struct imx_dma_channel only as extension to it.
+ */
+
+struct imx_dma_channel {
+ const char *name;
+ void (*irq_handler) (int, void *);
+ void (*err_handler) (int, void *, int errcode);
+ void (*prog_handler) (int, void *, struct scatterlist *);
+ void *data;
+ dmamode_t dma_mode;
+ struct scatterlist *sg;
+ unsigned int resbytes;
+ int dma_num;
+
+ int in_use;
+
+ u32 ccr_from_device;
+ u32 ccr_to_device;
+
+ struct timer_list watchdog;
+
+ int hw_chaining;
+};
+
+static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
+
+static struct clk *dma_clk;
+
+static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
+{
+ if (cpu_is_mx27())
+ return imxdma->hw_chaining;
+ else
+ return 0;
+}
+
+
+/*
+ * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
+ */
+static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ unsigned long now;
+
+ if (!imxdma->name) {
+ printk(KERN_CRIT "%s: called for not allocated channel %d\n",
+ __func__, channel);
+ return 0;
+ }
+
+ now = min(imxdma->resbytes, sg->length);
+ imxdma->resbytes -= now;
+
+ if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
+ __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+ else
+ __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+
+ __raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+
+ pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
+ "size 0x%08x\n", channel,
+ __raw_readl(DMA_BASE + DMA_DAR(channel)),
+ __raw_readl(DMA_BASE + DMA_SAR(channel)),
+ __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+
+ return now;
+}
+
+/**
+ * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
+ * device transfer
+ *
+ * @channel: i.MX DMA channel number
+ * @dma_address: the DMA/physical memory address of the linear data block
+ * to transfer
+ * @dma_length: length of the data block in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ * or %DMA_MODE_WRITE from memory to the device
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ * Zero indicates success.
+ */
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+ unsigned int dma_length, unsigned int dev_addr,
+ dmamode_t dmamode)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+ imxdma->sg = NULL;
+ imxdma->dma_mode = dmamode;
+
+ if (!dma_address) {
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
+ channel);
+ return -EINVAL;
+ }
+
+ if (!dma_length) {
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
+ channel);
+ return -EINVAL;
+ }
+
+ if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+ pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+ "dev_addr=0x%08x for read\n",
+ channel, __func__, (unsigned int)dma_address,
+ dma_length, dev_addr);
+
+ __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
+ __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
+ __raw_writel(imxdma->ccr_from_device,
+ DMA_BASE + DMA_CCR(channel));
+ } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+ pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+ "dev_addr=0x%08x for write\n",
+ channel, __func__, (unsigned int)dma_address,
+ dma_length, dev_addr);
+
+ __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
+ __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
+ __raw_writel(imxdma->ccr_to_device,
+ DMA_BASE + DMA_CCR(channel));
+ } else {
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
+ channel);
+ return -EINVAL;
+ }
+
+ __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_single);
+
+/**
+ * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
+ * @channel: i.MX DMA channel number
+ * @sg: pointer to the scatter-gather list/vector
+ * @sgcount: scatter-gather list hungs count
+ * @dma_length: total length of the transfer request in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ * or %DMA_MODE_WRITE from memory to the device
+ *
+ * The function sets up DMA channel state and registers to be ready for
+ * transfer specified by provided parameters. The scatter-gather emulation
+ * is set up according to the parameters.
+ *
+ * The full preparation of the transfer requires setup of more register
+ * by the caller before imx_dma_enable() can be called.
+ *
+ * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
+ *
+ * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
+ *
+ * %CCR(channel) has to specify transfer parameters, the next settings is
+ * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
+ * specified
+ *
+ * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
+ *
+ * The typical setup for %DMA_MODE_WRITE is specified by next options
+ * combination
+ *
+ * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
+ *
+ * Be careful here and do not mistakenly mix source and target device
+ * port sizes constants, they are really different:
+ * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
+ * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ * Zero indicates success.
+ */
+int
+imx_dma_setup_sg(int channel,
+ struct scatterlist *sg, unsigned int sgcount,
+ unsigned int dma_length, unsigned int dev_addr,
+ dmamode_t dmamode)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+ if (imxdma->in_use)
+ return -EBUSY;
+
+ imxdma->sg = sg;
+ imxdma->dma_mode = dmamode;
+ imxdma->resbytes = dma_length;
+
+ if (!sg || !sgcount) {
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+ channel);
+ return -EINVAL;
+ }
+
+ if (!sg->length) {
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
+ channel);
+ return -EINVAL;
+ }
+
+ if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+ pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+ "dev_addr=0x%08x for read\n",
+ channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+ __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
+ __raw_writel(imxdma->ccr_from_device,
+ DMA_BASE + DMA_CCR(channel));
+ } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+ pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+ "dev_addr=0x%08x for write\n",
+ channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+ __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
+ __raw_writel(imxdma->ccr_to_device,
+ DMA_BASE + DMA_CCR(channel));
+ } else {
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
+ channel);
+ return -EINVAL;
+ }
+
+ imx_dma_sg_next(channel, sg);
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_sg);
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+ unsigned int config_mem, unsigned int dmareq, int hw_chaining)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ u32 dreq = 0;
+
+ imxdma->hw_chaining = 0;
+
+ if (hw_chaining) {
+ imxdma->hw_chaining = 1;
+ if (!imx_dma_hw_chain(imxdma))
+ return -EINVAL;
+ }
+
+ if (dmareq)
+ dreq = CCR_REN;
+
+ imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
+ imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
+
+ __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_dma_config_channel);
+
+void imx_dma_config_burstlen(int channel, unsigned int burstlen)
+{
+ __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+}
+EXPORT_SYMBOL(imx_dma_config_burstlen);
+
+/**
+ * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @irq_handler: the pointer to the function called if the transfer
+ * ends successfully
+ * @err_handler: the pointer to the function called if the premature
+ * end caused by error occurs
+ * @data: user specified value to be passed to the handlers
+ */
+int
+imx_dma_setup_handlers(int channel,
+ void (*irq_handler) (int, void *),
+ void (*err_handler) (int, void *, int),
+ void *data)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ unsigned long flags;
+
+ if (!imxdma->name) {
+ printk(KERN_CRIT "%s: called for not allocated channel %d\n",
+ __func__, channel);
+ return -ENODEV;
+ }
+
+ local_irq_save(flags);
+ __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+ imxdma->irq_handler = irq_handler;
+ imxdma->err_handler = err_handler;
+ imxdma->data = data;
+ local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_handlers);
+
+/**
+ * imx_dma_setup_progression_handler - setup i.MX DMA channel progression
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @prog_handler: the pointer to the function called if the transfer progresses
+ */
+int
+imx_dma_setup_progression_handler(int channel,
+ void (*prog_handler) (int, void*, struct scatterlist*))
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ unsigned long flags;
+
+ if (!imxdma->name) {
+ printk(KERN_CRIT "%s: called for not allocated channel %d\n",
+ __func__, channel);
+ return -ENODEV;
+ }
+
+ local_irq_save(flags);
+ imxdma->prog_handler = prog_handler;
+ local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_progression_handler);
+
+/**
+ * imx_dma_enable - function to start i.MX DMA channel operation
+ * @channel: i.MX DMA channel number
+ *
+ * The channel has to be allocated by driver through imx_dma_request()
+ * or imx_dma_request_by_prio() function.
+ * The transfer parameters has to be set to the channel registers through
+ * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
+ * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
+ * be set prior this function call by the channel user.
+ */
+void imx_dma_enable(int channel)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ unsigned long flags;
+
+ pr_debug("imxdma%d: imx_dma_enable\n", channel);
+
+ if (!imxdma->name) {
+ printk(KERN_CRIT "%s: called for not allocated channel %d\n",
+ __func__, channel);
+ return;
+ }
+
+ if (imxdma->in_use)
+ return;
+
+ local_irq_save(flags);
+
+ __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+ __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
+ DMA_BASE + DMA_DIMR);
+ __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
+ CCR_ACRPT,
+ DMA_BASE + DMA_CCR(channel));
+
+#ifdef CONFIG_ARCH_MX2
+ if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+ imxdma->sg = sg_next(imxdma->sg);
+ if (imxdma->sg) {
+ u32 tmp;
+ imx_dma_sg_next(channel, imxdma->sg);
+ tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
+ __raw_writel(tmp | CCR_RPT | CCR_ACRPT,
+ DMA_BASE + DMA_CCR(channel));
+ }
+ }
+#endif
+ imxdma->in_use = 1;
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_enable);
+
+/**
+ * imx_dma_disable - stop, finish i.MX DMA channel operatin
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_disable(int channel)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ unsigned long flags;
+
+ pr_debug("imxdma%d: imx_dma_disable\n", channel);
+
+ if (imx_dma_hw_chain(imxdma))
+ del_timer(&imxdma->watchdog);
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
+ DMA_BASE + DMA_DIMR);
+ __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
+ DMA_BASE + DMA_CCR(channel));
+ __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+ imxdma->in_use = 0;
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_disable);
+
+static void imx_dma_watchdog(unsigned long chno)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+ __raw_writel(0, DMA_BASE + DMA_CCR(chno));
+ imxdma->in_use = 0;
+ imxdma->sg = NULL;
+
+ if (imxdma->err_handler)
+ imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
+}
+
+static irqreturn_t dma_err_handler(int irq, void *dev_id)
+{
+ int i, disr;
+ struct imx_dma_channel *imxdma;
+ unsigned int err_mask;
+ int errcode;
+
+ disr = __raw_readl(DMA_BASE + DMA_DISR);
+
+ err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
+ __raw_readl(DMA_BASE + DMA_DRTOSR) |
+ __raw_readl(DMA_BASE + DMA_DSESR) |
+ __raw_readl(DMA_BASE + DMA_DBOSR);
+
+ if (!err_mask)
+ return IRQ_HANDLED;
+
+ __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+
+ for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+ if (!(err_mask & (1 << i)))
+ continue;
+ imxdma = &imx_dma_channels[i];
+ errcode = 0;
+
+ if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
+ __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+ errcode |= IMX_DMA_ERR_BURST;
+ }
+ if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
+ __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+ errcode |= IMX_DMA_ERR_REQUEST;
+ }
+ if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
+ __raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+ errcode |= IMX_DMA_ERR_TRANSFER;
+ }
+ if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
+ __raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+ errcode |= IMX_DMA_ERR_BUFFER;
+ }
+ if (imxdma->name && imxdma->err_handler) {
+ imxdma->err_handler(i, imxdma->data, errcode);
+ continue;
+ }
+
+ imx_dma_channels[i].sg = NULL;
+
+ printk(KERN_WARNING
+ "DMA timeout on channel %d (%s) -%s%s%s%s\n",
+ i, imxdma->name,
+ errcode & IMX_DMA_ERR_BURST ? " burst" : "",
+ errcode & IMX_DMA_ERR_REQUEST ? " request" : "",
+ errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
+ errcode & IMX_DMA_ERR_BUFFER ? " buffer" : "");
+ }
+ return IRQ_HANDLED;
+}
+
+static void dma_irq_handle_channel(int chno)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+ if (!imxdma->name) {
+ /*
+ * IRQ for an unregistered DMA channel:
+ * let's clear the interrupts and disable it.
+ */
+ printk(KERN_WARNING
+ "spurious IRQ for DMA channel %d\n", chno);
+ return;
+ }
+
+ if (imxdma->sg) {
+ u32 tmp;
+ struct scatterlist *current_sg = imxdma->sg;
+ imxdma->sg = sg_next(imxdma->sg);
+
+ if (imxdma->sg) {
+ imx_dma_sg_next(chno, imxdma->sg);
+
+ tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+
+ if (imx_dma_hw_chain(imxdma)) {
+ /* FIXME: The timeout should probably be
+ * configurable
+ */
+ mod_timer(&imxdma->watchdog,
+ jiffies + msecs_to_jiffies(500));
+
+ tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
+ __raw_writel(tmp, DMA_BASE +
+ DMA_CCR(chno));
+ } else {
+ __raw_writel(tmp & ~CCR_CEN, DMA_BASE +
+ DMA_CCR(chno));
+ tmp |= CCR_CEN;
+ }
+
+ __raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+
+ if (imxdma->prog_handler)
+ imxdma->prog_handler(chno, imxdma->data,
+ current_sg);
+
+ return;
+ }
+
+ if (imx_dma_hw_chain(imxdma)) {
+ del_timer(&imxdma->watchdog);
+ return;
+ }
+ }
+
+ __raw_writel(0, DMA_BASE + DMA_CCR(chno));
+ imxdma->in_use = 0;
+ if (imxdma->irq_handler)
+ imxdma->irq_handler(chno, imxdma->data);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+ int i, disr;
+
+#ifdef CONFIG_ARCH_MX2
+ dma_err_handler(irq, dev_id);
+#endif
+
+ disr = __raw_readl(DMA_BASE + DMA_DISR);
+
+ pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
+ disr);
+
+ __raw_writel(disr, DMA_BASE + DMA_DISR);
+ for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+ if (disr & (1 << i))
+ dma_irq_handle_channel(i);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * imx_dma_request - request/allocate specified channel number
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ */
+int imx_dma_request(int channel, const char *name)
+{
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+ unsigned long flags;
+ int ret;
+
+ /* basic sanity checks */
+ if (!name)
+ return -EINVAL;
+
+ if (channel >= IMX_DMA_CHANNELS) {
+ printk(KERN_CRIT "%s: called for non-existed channel %d\n",
+ __func__, channel);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+ if (imxdma->name) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+#ifdef CONFIG_ARCH_MX2
+ ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
+ NULL);
+ if (ret) {
+ printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
+ MXC_INT_DMACH0 + channel, channel);
+ return ret;
+ }
+ init_timer(&imxdma->watchdog);
+ imxdma->watchdog.function = &imx_dma_watchdog;
+ imxdma->watchdog.data = channel;
+#endif
+
+ imxdma->name = name;
+ imxdma->irq_handler = NULL;
+ imxdma->err_handler = NULL;
+ imxdma->data = NULL;
+ imxdma->sg = NULL;
+
+ local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(imx_dma_request);
+
+/**
+ * imx_dma_free - release previously acquired channel
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_free(int channel)
+{
+ unsigned long flags;
+ struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+ if (!imxdma->name) {
+ printk(KERN_CRIT
+ "%s: trying to free free channel %d\n",
+ __func__, channel);
+ return;
+ }
+
+ local_irq_save(flags);
+ /* Disable interrupts */
+ __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
+ DMA_BASE + DMA_DIMR);
+ __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
+ DMA_BASE + DMA_CCR(channel));
+ imxdma->name = NULL;
+
+#ifdef CONFIG_ARCH_MX2
+ free_irq(MXC_INT_DMACH0 + channel, NULL);
+#endif
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_free);
+
+/**
+ * imx_dma_request_by_prio - find and request some of free channels best
+ * suiting requested priority
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ *
+ * This function tries to find a free channel in the specified priority group
+ * This function tries to find a free channel in the specified priority group
+ * if the priority cannot be achieved it tries to look for free channel
+ * in the higher and then even lower priority groups.
+ *
+ * Return value: If there is no free channel to allocate, -%ENODEV is returned.
+ * On successful allocation channel is returned.
+ */
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
+{
+ int i;
+ int best;
+
+ switch (prio) {
+ case (DMA_PRIO_HIGH):
+ best = 8;
+ break;
+ case (DMA_PRIO_MEDIUM):
+ best = 4;
+ break;
+ case (DMA_PRIO_LOW):
+ default:
+ best = 0;
+ break;
+ }
+
+ for (i = best; i < IMX_DMA_CHANNELS; i++)
+ if (!imx_dma_request(i, name))
+ return i;
+
+ for (i = best - 1; i >= 0; i--)
+ if (!imx_dma_request(i, name))
+ return i;
+
+ printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL(imx_dma_request_by_prio);
+
+static int __init imx_dma_init(void)
+{
+ int ret = 0;
+ int i;
+
+ dma_clk = clk_get(NULL, "dma_clk");
+ clk_enable(dma_clk);
+
+ /* reset DMA module */
+ __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+
+#ifdef CONFIG_ARCH_MX1
+ ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+ if (ret) {
+ printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
+ return ret;
+ }
+
+ ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+ if (ret) {
+ printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
+ free_irq(DMA_INT, NULL);
+ return ret;
+ }
+#endif
+ /* enable DMA module */
+ __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+
+ /* clear all interrupts */
+ __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+
+ /* disable interrupts */
+ __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+
+ for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+ imx_dma_channels[i].sg = NULL;
+ imx_dma_channels[i].dma_num = i;
+ }
+
+ return ret;
+}
+
+arch_initcall(imx_dma_init);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 1bc6fb0f9a8..745b48864f9 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -90,6 +90,9 @@
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+#define MXC_EXP_IO_BASE (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0)
#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1)
#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 24caa2b7c91..d21f78e7881 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -39,7 +39,7 @@ struct clk {
/* Register bit position for clock's enable/disable control. */
u8 enable_shift;
/* Register address for clock's enable/disable control. */
- u32 enable_reg;
+ void __iomem *enable_reg;
u32 flags;
/* get the current clock rate (always a fresh value) */
unsigned long (*get_rate) (struct clk *);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index a6d2e24aab1..6350287a59b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -11,10 +11,13 @@
#ifndef __ASM_ARCH_MXC_COMMON_H__
#define __ASM_ARCH_MXC_COMMON_H__
+struct platform_device;
+
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
extern void mxc_timer_init(const char *clk_timer);
extern int mxc_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
+extern int mxc_register_device(struct platform_device *pdev, void *data);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
new file mode 100644
index 00000000000..e85fd946116
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+ *
+ * i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <asm/dma.h>
+
+#ifndef __ASM_ARCH_MXC_DMA_H
+#define __ASM_ARCH_MXC_DMA_H
+
+#define IMX_DMA_CHANNELS 16
+
+#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+
+#define IMX_DMA_MEMSIZE_32 (0 << 4)
+#define IMX_DMA_MEMSIZE_8 (1 << 4)
+#define IMX_DMA_MEMSIZE_16 (2 << 4)
+#define IMX_DMA_TYPE_LINEAR (0 << 10)
+#define IMX_DMA_TYPE_2D (1 << 10)
+#define IMX_DMA_TYPE_FIFO (2 << 10)
+
+#define IMX_DMA_ERR_BURST (1 << 0)
+#define IMX_DMA_ERR_REQUEST (1 << 1)
+#define IMX_DMA_ERR_TRANSFER (1 << 2)
+#define IMX_DMA_ERR_BUFFER (1 << 3)
+#define IMX_DMA_ERR_TIMEOUT (1 << 4)
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+ unsigned int config_mem, unsigned int dmareq, int hw_chaining);
+
+void
+imx_dma_config_burstlen(int channel, unsigned int burstlen);
+
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+ unsigned int dma_length, unsigned int dev_addr,
+ dmamode_t dmamode);
+
+int
+imx_dma_setup_sg(int channel, struct scatterlist *sg,
+ unsigned int sgcount, unsigned int dma_length,
+ unsigned int dev_addr, dmamode_t dmamode);
+
+int
+imx_dma_setup_handlers(int channel,
+ void (*irq_handler) (int, void *),
+ void (*err_handler) (int, void *, int), void *data);
+
+int
+imx_dma_setup_progression_handler(int channel,
+ void (*prog_handler) (int, void*, struct scatterlist*));
+
+void imx_dma_enable(int channel);
+
+void imx_dma_disable(int channel);
+
+int imx_dma_request(int channel, const char *name);
+
+void imx_dma_free(int channel);
+
+enum imx_dma_prio {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+};
+
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
+
+#endif /* _ASM_ARCH_MXC_DMA_H */
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index b542433afb1..11632028f7d 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,11 +9,17 @@
* published by the Free Software Foundation.
*/
+#define AVIC_NIMASK 0x04
+
@ this macro disables fast irq (not implemented)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+#ifdef CONFIG_MXC_IRQ_PRIOR
+ ldr r4, [\base, #AVIC_NIMASK]
+#endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -23,7 +29,6 @@
@ and returns its number in irqnr
@ and returns if an interrupt occured in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
@ Load offset & priority of the highest priority
@ interrupt pending from AVIC_NIVECSR
ldr \irqstat, [\base, #0x40]
@@ -32,6 +37,11 @@
mov \irqnr, \irqstat, asr #16
@ set zero flag if IRQ + 1 == 0
adds \tmp, \irqnr, #1
+#ifdef CONFIG_MXC_IRQ_PRIOR
+ bicne \tmp, \irqstat, #0xFFFFFFE0
+ strne \tmp, [\base, #AVIC_NIMASK]
+ streq r4, [\base, #AVIC_NIMASK]
+#endif
.endm
@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 076d37b38eb..3d09bfd6c53 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -247,6 +247,11 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#endif
#ifdef CONFIG_ARCH_MX2
+#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
@@ -294,6 +299,16 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21)
+#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC_B (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE_B (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26)
#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
@@ -335,8 +350,15 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
@@ -355,6 +377,8 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13)
#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
+#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
+#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 7509e7692f0..c9f39c2fb8c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -491,6 +491,26 @@ enum iomux_pins {
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
+/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
+ * cspi1_ss1*/
/*
* This function configures the pad value for a IOMUX pin.
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 228c4f68ccd..b55bba35e18 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,5 +12,6 @@
#define __ASM_ARCH_MXC_IRQS_H__
#include <mach/hardware.h>
+extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 212ecc24662..a86db64744a 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -128,6 +128,7 @@
* it returns 0xDEADBEEF
*/
#define IO_ADDRESS(x) \
+ (void __iomem *) \
(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
AIPI_IO_ADDRESS(x) : \
((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index a7373e4a56c..0536f8917bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -198,6 +198,7 @@
* it returns 0xDEADBEEF
*/
#define IO_ADDRESS(x) \
+ (void __iomem *) \
(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 332eda4dbd3..f6caab06213 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -33,4 +33,10 @@
# define cpu_is_mx27() (0)
#endif
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+#endif
+
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1053b666c67..d862c9e5f8d 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -18,7 +18,7 @@
*/
#include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/common.h>
#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
@@ -30,14 +30,7 @@
#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */
-#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */
-#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */
-#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */
-#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */
-#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */
-#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */
-#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */
+#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
@@ -54,6 +47,24 @@
#define IIM_PROD_REV_SH 3
#define IIM_PROD_REV_LEN 5
+#ifdef CONFIG_MXC_IRQ_PRIOR
+void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+ unsigned int temp;
+ unsigned int mask = 0x0F << irq % 8 * 4;
+
+ if (irq > 63)
+ return;
+
+ temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+ temp &= ~mask;
+ temp |= prio & mask;
+
+ __raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+}
+EXPORT_SYMBOL(imx_irq_set_priority);
+#endif
+
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
@@ -101,10 +112,9 @@ void __init mxc_init_irq(void)
set_irq_flags(i, IRQF_VALID);
}
- /* Set WDOG2's interrupt the highest priority level (bit 28-31) */
- reg = __raw_readl(AVIC_NIPRIORITY6);
- reg |= (0xF << 28);
- __raw_writel(reg, AVIC_NIPRIORITY6);
+ /* Set default priority value (0) for all IRQ's */
+ for (i = 0; i < 8; i++)
+ __raw_writel(0, AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index b917206ee90..a94f0c44ebc 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,9 @@ config ARCH_OMAP1
config ARCH_OMAP2
bool "TI OMAP2"
+config ARCH_OMAP3
+ bool "TI OMAP3"
+
endchoice
comment "OMAP Feature Selections"
@@ -29,6 +32,30 @@ config OMAP_DEBUG_LEDS
depends on OMAP_DEBUG_DEVICES
default y if LEDS || LEDS_OMAP_DEBUG
+config OMAP_DEBUG_POWERDOMAIN
+ bool "Emit debug messages from powerdomain layer"
+ depends on ARCH_OMAP2 || ARCH_OMAP3
+ default n
+ help
+ Say Y here if you want to compile in powerdomain layer
+ debugging messages for OMAP2/3. These messages can
+ provide more detail as to why some powerdomain calls
+ may be failing, and will also emit a descriptive message
+ for every powerdomain register write. However, the
+ extra detail costs some memory.
+
+config OMAP_DEBUG_CLOCKDOMAIN
+ bool "Emit debug messages from clockdomain layer"
+ depends on ARCH_OMAP2 || ARCH_OMAP3
+ default n
+ help
+ Say Y here if you want to compile in clockdomain layer
+ debugging messages for OMAP2/3. These messages can
+ provide more detail as to why some clockdomain calls
+ may be failing, and will also emit a descriptive message
+ for every clockdomain register write. However, the
+ extra detail costs some memory.
+
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_OMAP
@@ -88,13 +115,13 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX and 24XX.
+ currently only available for OMAP16XX, 24XX and 34XX.
endchoice
@@ -109,7 +136,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to use OMAP Dual-Mode timers.
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 2c4051cc79a..deaff58878a 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
- usb.o fb.o
+ usb.o fb.o io.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 197974defbe..bf6a10c5fc4 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -22,8 +22,7 @@
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <linux/debugfs.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/clock.h>
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f4dff423ae7..0843b8882f9 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -18,12 +18,12 @@
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <asm/io.h>
#include <asm/setup.h>
#include <mach/common.h>
@@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals;
static void __init __omap2_set_globals(void)
{
+ omap2_set_globals_tap(omap2_globals);
omap2_set_globals_memory(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
@@ -258,12 +259,13 @@ static void __init __omap2_set_globals(void)
#if defined(CONFIG_ARCH_OMAP2420)
static struct omap_globals omap242x_globals = {
- .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
- .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
- .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
- .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
- .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
- .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+ .class = OMAP242X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x48014000),
+ .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
};
void __init omap2_set_globals_242x(void)
@@ -276,12 +278,13 @@ void __init omap2_set_globals_242x(void)
#if defined(CONFIG_ARCH_OMAP2430)
static struct omap_globals omap243x_globals = {
- .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
- .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
- .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
- .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
- .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
- .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+ .class = OMAP243X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4900a000),
+ .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
};
void __init omap2_set_globals_243x(void)
@@ -294,12 +297,13 @@ void __init omap2_set_globals_243x(void)
#if defined(CONFIG_ARCH_OMAP3430)
static struct omap_globals omap343x_globals = {
- .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
- .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
- .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
- .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
- .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
- .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+ .class = OMAP343X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4830A000),
+ .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
};
void __init omap2_set_globals_343x(void)
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index ae1de308aaa..b2690242a39 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -20,9 +20,9 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/system.h>
#define VERY_HI_RATE 900000000
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 5b73bb27445..e31154b15d9 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -12,9 +12,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/board.h>
#include <mach/gpio.h>
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9422dee7de8..2f4c0cabfd3 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -11,8 +11,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 01da719a745..ed94dee326c 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -13,24 +13,24 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
@@ -76,7 +76,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -95,6 +95,10 @@ static inline void omap_init_dsp(void) { }
static void omap_init_kp(void)
{
+ /* 2430 and 34xx keypad is on TWL4030 */
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
+ return;
+
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
@@ -156,13 +160,6 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
{
int i;
- if (size > OMAP_MAX_MCBSP_COUNT) {
- printk(KERN_WARNING "Registered too many McBSPs platform_data."
- " Using maximum (%d) available.\n",
- OMAP_MAX_MCBSP_COUNT);
- size = OMAP_MAX_MCBSP_COUNT;
- }
-
omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
GFP_KERNEL);
if (!omap_mcbsp_devices) {
@@ -525,10 +522,6 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -538,7 +531,6 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index a63b644ad30..50f8b4ad9a0 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1233,7 +1233,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
/* request and reserve DMA channels for the chain */
for (i = 0; i < no_of_chans; i++) {
err = omap_request_dma(dev_id, dev_name,
- callback, 0, &channels[i]);
+ callback, NULL, &channels[i]);
if (err < 0) {
int j;
for (j = 0; j < i; j++)
@@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void)
int ch, r;
if (cpu_class_is_omap1()) {
- omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
+ omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap24xx()) {
- omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
+ omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap34xx()) {
- omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
+ omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 743a4abcd85..963c31cd154 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,9 +32,9 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/dmtimer.h>
-#include <asm/io.h>
#include <mach/irqs.h>
/* register offsets */
@@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
- timer->io_base = (void __iomem *)io_p2v(timer->phys_base);
+ timer->io_base = IO_ADDRESS(timer->phys_base);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (cpu_class_is_omap2()) {
char clk_name[16];
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 17a92a31e74..ce6b4baeede 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -27,9 +27,9 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach/map.h>
#include <mach/board.h>
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9e1341ebc14..8679fbca6bb 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -17,6 +17,7 @@
#include <linux/sysdev.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -24,12 +25,10 @@
#include <mach/gpio.h>
#include <asm/mach/irq.h>
-#include <asm/io.h>
-
/*
* OMAP1510 GPIO registers
*/
-#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000
+#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000)
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
@@ -43,10 +42,10 @@
/*
* OMAP1610 specific GPIO registers
*/
-#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400
-#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00
-#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400
-#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00
+#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00)
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
@@ -68,12 +67,12 @@
/*
* OMAP730 specific GPIO registers
*/
-#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000
-#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800
-#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000
-#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800
-#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000
-#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800
+#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800)
#define OMAP730_GPIO_DATA_INPUT 0x00
#define OMAP730_GPIO_DATA_OUTPUT 0x04
#define OMAP730_GPIO_DIR_CONTROL 0x08
@@ -84,16 +83,16 @@
/*
* omap24xx specific GPIO registers
*/
-#define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000
-#define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000
-#define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000
-#define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000
+#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000)
-#define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000
-#define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000
-#define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000
-#define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000
-#define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000
+#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000)
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
@@ -123,13 +122,14 @@
* omap34xx specific GPIO registers
*/
-#define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000
-#define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000
-#define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000
-#define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000
-#define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000
-#define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000
+#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
struct gpio_bank {
void __iomem *base;
@@ -161,7 +161,7 @@ struct gpio_bank {
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
- { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
+ { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -171,14 +171,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
#ifdef CONFIG_ARCH_OMAP15XX
static struct gpio_bank gpio_bank_1510[2] = {
- { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
};
#endif
#ifdef CONFIG_ARCH_OMAP730
static struct gpio_bank gpio_bank_730[7] = {
- { OMAP_MPUIO_BASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
{ OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
{ OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
@@ -1051,13 +1051,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
- struct irq_desc *d;
-
if (!(isr & 1))
continue;
- d = irq_desc + gpio_irq;
- desc_handle_irq(gpio_irq, d);
+ generic_handle_irq(gpio_irq);
}
}
/* if bank has any level sensitive GPIO pin interrupt
@@ -1393,7 +1390,7 @@ static int __init _omap_gpio_init(void)
gpio_bank_count = 5;
gpio_bank = gpio_bank_1610;
- rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+ rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
@@ -1412,7 +1409,7 @@ static int __init _omap_gpio_init(void)
gpio_bank_count = 4;
gpio_bank = gpio_bank_242x;
- rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
@@ -1421,7 +1418,7 @@ static int __init _omap_gpio_init(void)
gpio_bank_count = 5;
gpio_bank = gpio_bank_243x;
- rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
@@ -1432,7 +1429,7 @@ static int __init _omap_gpio_init(void)
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_34xx;
- rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
@@ -1441,10 +1438,9 @@ static int __init _omap_gpio_init(void)
int j, gpio_count = 16;
bank = &gpio_bank[i];
- bank->base = IO_ADDRESS(bank->base);
spin_lock_init(&bank->lock);
if (bank_is_mpuio(bank))
- omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
+ __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc022394..10d449ea7ed 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e963d..731c858cf3f 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3e519..7c3fa0f0a65 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
@@ -29,6 +29,9 @@
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
new file mode 100644
index 00000000000..66e2746c04c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ldp.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ldp.h
+ *
+ * Hardware definitions for TI OMAP3 LDP.
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_LDP_H
+#define __ASM_ARCH_OMAP_LDP_H
+
+extern void twl4030_bci_battery_init(void);
+
+#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
new file mode 100644
index 00000000000..3080d52d877
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-omap3beagle.h
+ *
+ * Hardware definitions for TI OMAP3 BEAGLE.
+ *
+ * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP3_BEAGLE_H
+#define __ASM_ARCH_OMAP3_BEAGLE_H
+
+#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h
new file mode 100644
index 00000000000..7ecae66966d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-overo.h
@@ -0,0 +1,26 @@
+/*
+ * board-overo.h (Gumstix Overo)
+ *
+ * Initial code: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OVERO_H
+#define __ASM_ARCH_OVERO_H
+
+#define OVERO_GPIO_BT_XGATE 15
+#define OVERO_GPIO_W2W_NRESET 16
+#define OVERO_GPIO_BT_NRESET 164
+#define OVERO_GPIO_USBH_CPEN 168
+#define OVERO_GPIO_USBH_NRESET 183
+
+#endif /* ____ASM_ARCH_OVERO_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 54445642f35..c23c12ccb35 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@ struct omap_mmc_conf {
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 92f7c7238fc..719298554ed 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -15,6 +15,7 @@
struct module;
struct clk;
+struct clockdomain;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
@@ -79,6 +80,8 @@ struct clk {
u32 clksel_mask;
const struct clksel *clksel;
struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
#else
__u8 rate_offset;
__u8 src_offset;
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
new file mode 100644
index 00000000000..1f51f017378
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -0,0 +1,106 @@
+/*
+ * linux/include/asm-arm/arch-omap/clockdomain.h
+ *
+ * OMAP2/3 clockdomain framework functions
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+
+#include <mach/powerdomain.h>
+#include <mach/clock.h>
+#include <mach/cpu.h>
+
+/* Clockdomain capability flags */
+#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
+#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
+#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
+#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
+
+#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
+#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
+#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
+
+/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
+#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0
+#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1
+
+/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
+#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0
+#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1
+#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2
+#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3
+
+/*
+ * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps
+ * and sleepdeps added when a powerdomain should stay active in hwsup mode;
+ * and conversely, removed when the powerdomain should be allowed to go
+ * inactive in hwsup mode.
+ */
+struct clkdm_pwrdm_autodep {
+
+ /* Name of the powerdomain to add a wkdep/sleepdep on */
+ const char *pwrdm_name;
+
+ /* Powerdomain pointer (looked up at clkdm_init() time) */
+ struct powerdomain *pwrdm;
+
+ /* OMAP chip types that this clockdomain dep is valid on */
+ const struct omap_chip_id omap_chip;
+
+};
+
+struct clockdomain {
+
+ /* Clockdomain name */
+ const char *name;
+
+ /* Powerdomain enclosing this clockdomain */
+ const char *pwrdm_name;
+
+ /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
+ const u16 clktrctrl_mask;
+
+ /* Clockdomain capability flags */
+ const u8 flags;
+
+ /* OMAP chip types that this clockdomain is valid on */
+ const struct omap_chip_id omap_chip;
+
+ /* Usecount tracking */
+ atomic_t usecount;
+
+ /* Powerdomain pointer assigned at clkdm_register() */
+ struct powerdomain *pwrdm;
+
+ struct list_head node;
+
+};
+
+void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps);
+int clkdm_register(struct clockdomain *clkdm);
+int clkdm_unregister(struct clockdomain *clkdm);
+struct clockdomain *clkdm_lookup(const char *name);
+
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
+struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
+
+void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
+void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
+
+int omap2_clkdm_wakeup(struct clockdomain *clkdm);
+int omap2_clkdm_sleep(struct clockdomain *clkdm);
+
+int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
+int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 06093112b66..ef70e2b0f05 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -34,6 +34,7 @@ struct sys_timer;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
extern void omap_serial_init(void);
+extern void omap_serial_enable_clocks(int enable);
#ifdef CONFIG_I2C_OMAP
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
@@ -49,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
/* IO bases for various OMAP processors */
struct omap_globals {
+ u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
void __iomem *sdrc; /* SDRAM Controller */
void __iomem *sms; /* SDRAM Memory Scheduler */
@@ -62,6 +64,7 @@ void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
void omap2_set_globals_memory(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index e3fd62d9a99..dc988676057 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -16,14 +13,23 @@
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+ IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+ IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
- (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+ IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 05aee0eda34..e0464187209 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430)
get_sil_revision(system_rev)
/* Various silicon macros defined here */
+#define OMAP242X_CLASS 0x24200000
#define OMAP2420_REV_ES1_0 0x24200000
#define OMAP2420_REV_ES2_0 0x24201000
+
+#define OMAP243X_CLASS 0x24300000
#define OMAP2430_REV_ES1_0 0x24300000
+
+#define OMAP343X_CLASS 0x34300000
#define OMAP3430_REV_ES1_0 0x34300000
#define OMAP3430_REV_ES2_0 0x34301000
#define OMAP3430_REV_ES2_1 0x34302000
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b0039bdeb4..1b11f5c6a2d 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -35,6 +35,18 @@
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00004000 @ UART 3
#endif
+
+#elif CONFIG_ARCH_OMAP3
+ moveq \rx, #0x48000000 @ physical base address
+ movne \rx, #0xd8000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ add \rx, \rx, #0x00fb0000 @ UART 3
+ add \rx, \rx, #0x00006000
+#endif
#endif
.endm
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index d4e9043bf20..030118ee204 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -55,9 +55,17 @@
1510:
.endm
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */
.macro disable_fiq
.endm
@@ -79,7 +87,7 @@
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
2222:
- ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
+ ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
.endm
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
index c92e4b42b28..f1864a652f7 100644
--- a/arch/arm/plat-omap/include/mach/fpga.h
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -34,9 +34,9 @@ extern void omap1510_fpga_init_irq(void);
* ---------------------------------------------------------------------------
*/
/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
-#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
-#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
@@ -85,9 +85,9 @@ struct h2p2_dbg_fpga {
* OMAP-1510 FPGA
* ---------------------------------------------------------------------------
*/
-#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */
-#define OMAP1510_FPGA_SIZE SZ_4K
-#define OMAP1510_FPGA_START 0x08000000 /* Physical */
+#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* PA */
/* Revision */
#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0)
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 94ce2780e8e..98e9008b7e9 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -26,10 +26,10 @@
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
+#include <linux/io.h>
#include <mach/irqs.h>
-#include <asm/io.h>
-#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000
+#define OMAP_MPUIO_BASE 0xfffb5000
#ifdef CONFIG_ARCH_OMAP730
#define OMAP_MPUIO_INPUT_LATCH 0x00
@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 6a8e07ffc2d..45b678439bb 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -11,6 +11,9 @@
#ifndef __OMAP2_GPMC_H
#define __OMAP2_GPMC_H
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM 8
+
#define GPMC_CS_CONFIG1 0x00
#define GPMC_CS_CONFIG2 0x04
#define GPMC_CS_CONFIG3 0x08
@@ -22,6 +25,9 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
@@ -78,9 +84,14 @@ struct gpmc_timings {
u16 access; /* Start-cycle to first data valid delay */
u16 rd_cycle; /* Total read cycle time */
u16 wr_cycle; /* Total write cycle time */
+
+ /* The following are only on OMAP3430 */
+ u16 wr_access; /* WRACCESSTIME */
+ u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
extern unsigned long gpmc_get_fclk_period(void);
@@ -92,5 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
+extern void gpmc_init(void);
#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 07f5d7f2152..6589ddbb63b 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -89,7 +89,7 @@
#define DPLL_CTL (0xfffecf00)
/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE (0xe1008000)
+#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
@@ -282,8 +282,8 @@
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
@@ -322,6 +322,14 @@
#include "board-2430sdp.h"
#endif
+#ifdef CONFIG_MACH_OMAP3_BEAGLE
+#include "board-omap3beagle.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_LDP
+#include "board-ldp.h"
+#endif
+
#ifdef CONFIG_MACH_OMAP_APOLLON
#include "board-apollon.h"
#endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 2a30b7d88cd..adc83b7b820 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -55,14 +55,13 @@
#if defined(CONFIG_ARCH_OMAP1)
-#define IO_PHYS 0xFFFB0000
-#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define IO_SIZE 0x40000
-#define IO_VIRT (IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define io_p2v(pa) ((pa) - IO_OFFSET)
-#define io_v2p(va) ((va) + IO_OFFSET)
+#define IO_PHYS 0xFFFB0000
+#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define IO_SIZE 0x40000
+#define IO_VIRT (IO_PHYS - IO_OFFSET)
+#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define io_v2p(va) ((va) + IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
@@ -74,7 +73,6 @@
#define L4_24XX_VIRT 0xd8000000
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-#ifdef CONFIG_ARCH_OMAP2430
#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
#define L4_WK_243X_VIRT 0xd9000000
#define L4_WK_243X_SIZE SZ_1M
@@ -88,13 +86,10 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
-#endif
-
-#define IO_OFFSET 0x90000000
-#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
-#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
+#define IO_OFFSET 0x90000000
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
/* DSP */
#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
@@ -149,9 +144,8 @@
#define IO_OFFSET 0x90000000
-#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
/* DSP */
@@ -167,7 +161,14 @@
#endif
-#ifndef __ASSEMBLER__
+#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
+#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa))
+#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
/*
* Functions to access the OMAP IO region
@@ -178,13 +179,13 @@
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
*/
-#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
-#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
+#define omap_readb(a) __raw_readb(IO_ADDRESS(a))
+#define omap_readw(a) __raw_readw(IO_ADDRESS(a))
+#define omap_readl(a) __raw_readl(IO_ADDRESS(a))
-#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
+#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a))
+#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
+#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
@@ -192,6 +193,12 @@ extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
extern void omap2_init_common_hw(void);
+#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
+#define __arch_iounmap(v) omap_iounmap(v)
+
+void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
+void omap_iounmap(volatile void __iomem *addr);
+
#endif
#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 17248bbf3f2..a2929ac8c68 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
@@ -176,6 +177,7 @@
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,18 @@
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
+#define INT_24XX_MCBSP4_IRQ_TX 54
+#define INT_24XX_MCBSP4_IRQ_RX 55
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
@@ -278,7 +286,60 @@
#define INT_24XX_USB_IRQ_HGEN 78
#define INT_24XX_USB_IRQ_HSOF 79
#define INT_24XX_USB_IRQ_OTG 80
+#define INT_24XX_MCBSP5_IRQ_TX 81
+#define INT_24XX_MCBSP5_IRQ_RX 82
#define INT_24XX_MMC_IRQ 83
+#define INT_24XX_MMC2_IRQ 86
+#define INT_24XX_MCBSP3_IRQ_TX 89
+#define INT_24XX_MCBSP3_IRQ_RX 90
+#define INT_24XX_SPI3_IRQ 91
+
+#define INT_243X_MCBSP2_IRQ 16
+#define INT_243X_MCBSP3_IRQ 17
+#define INT_243X_MCBSP4_IRQ 18
+#define INT_243X_MCBSP5_IRQ 19
+#define INT_243X_MCBSP1_IRQ 64
+#define INT_243X_HS_USB_MC 92
+#define INT_243X_HS_USB_DMA 93
+#define INT_243X_CARKIT_IRQ 94
+
+#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_34XX_ST_MCBSP2_IRQ 4
+#define INT_34XX_ST_MCBSP3_IRQ 5
+#define INT_34XX_SSM_ABORT_IRQ 6
+#define INT_34XX_SYS_NIRQ 7
+#define INT_34XX_D2D_FW_IRQ 8
+#define INT_34XX_PRCM_MPU_IRQ 11
+#define INT_34XX_MCBSP1_IRQ 16
+#define INT_34XX_MCBSP2_IRQ 17
+#define INT_34XX_MCBSP3_IRQ 22
+#define INT_34XX_MCBSP4_IRQ 23
+#define INT_34XX_CAM_IRQ 24
+#define INT_34XX_MCBSP5_IRQ 27
+#define INT_34XX_GPIO_BANK1 29
+#define INT_34XX_GPIO_BANK2 30
+#define INT_34XX_GPIO_BANK3 31
+#define INT_34XX_GPIO_BANK4 32
+#define INT_34XX_GPIO_BANK5 33
+#define INT_34XX_GPIO_BANK6 34
+#define INT_34XX_USIM_IRQ 35
+#define INT_34XX_WDT3_IRQ 36
+#define INT_34XX_SPI4_IRQ 48
+#define INT_34XX_SHA1MD52_IRQ 49
+#define INT_34XX_FPKA_READY_IRQ 50
+#define INT_34XX_SHA1MD51_IRQ 51
+#define INT_34XX_RNG_IRQ 52
+#define INT_34XX_I2C3_IRQ 61
+#define INT_34XX_FPKA_ERROR_IRQ 64
+#define INT_34XX_PBIAS_IRQ 75
+#define INT_34XX_OHCI_IRQ 76
+#define INT_34XX_EHCI_IRQ 77
+#define INT_34XX_TLL_IRQ 78
+#define INT_34XX_PARTHASH_IRQ 79
+#define INT_34XX_MMC3_IRQ 94
+#define INT_34XX_GPT12_IRQ 95
+
+#define INT_34XX_BENCH_MPU_EMUL 3
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 8fdb95e26fc..6a0d1a0a24a 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -43,9 +43,15 @@
#define OMAP24XX_MCBSP1_BASE 0x48074000
#define OMAP24XX_MCBSP2_BASE 0x48076000
+#define OMAP2430_MCBSP3_BASE 0x4808c000
+#define OMAP2430_MCBSP4_BASE 0x4808e000
+#define OMAP2430_MCBSP5_BASE 0x48096000
#define OMAP34XX_MCBSP1_BASE 0x48074000
#define OMAP34XX_MCBSP2_BASE 0x49022000
+#define OMAP34XX_MCBSP3_BASE 0x49024000
+#define OMAP34XX_MCBSP4_BASE 0x49026000
+#define OMAP34XX_MCBSP5_BASE 0x48096000
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
@@ -81,9 +87,6 @@
#define OMAP_MCBSP_REG_XCERG 0x3A
#define OMAP_MCBSP_REG_XCERH 0x3C
-#define OMAP_MAX_MCBSP_COUNT 3
-#define MAX_MCBSP_CLOCKS 3
-
#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
@@ -91,12 +94,14 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
#define OMAP_MCBSP_REG_DXR2 0x08
#define OMAP_MCBSP_REG_DXR1 0x0C
+#define OMAP_MCBSP_REG_DRR 0x00
+#define OMAP_MCBSP_REG_DXR 0x08
#define OMAP_MCBSP_REG_SPCR2 0x10
#define OMAP_MCBSP_REG_SPCR1 0x14
#define OMAP_MCBSP_REG_RCR2 0x18
@@ -124,9 +129,9 @@
#define OMAP_MCBSP_REG_RCERH 0x70
#define OMAP_MCBSP_REG_XCERG 0x74
#define OMAP_MCBSP_REG_XCERH 0x78
-
-#define OMAP_MAX_MCBSP_COUNT 2
-#define MAX_MCBSP_CLOCKS 2
+#define OMAP_MCBSP_REG_SYSCON 0x8C
+#define OMAP_MCBSP_REG_XCCR 0xAC
+#define OMAP_MCBSP_REG_RCCR 0xB0
#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -137,10 +142,6 @@
#endif
-#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
-
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -151,6 +152,7 @@
#define DXENA 0x0080
#define CLKSTP(value) ((value)<<11) /* bits 11:12 */
#define RJUST(value) ((value)<<13) /* bits 13:14 */
+#define ALB 0x8000
#define DLB 0x8000
/************************** McBSP SPCR2 bit definitions ***********************/
@@ -228,6 +230,17 @@
#define XPABLK(value) ((value)<<5) /* Bits 5:6 */
#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */
+/*********************** McBSP XCCR bit definitions *************************/
+#define DILB 0x0020
+#define XDMAEN 0x0008
+#define XDISABLE 0x0001
+
+/********************** McBSP RCCR bit definitions *************************/
+#define RDMAEN 0x0008
+#define RDISABLE 0x0001
+
+/********************** McBSP SYSCONFIG bit definitions ********************/
+#define SOFTRST 0x0002
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
@@ -260,6 +273,8 @@ typedef enum {
OMAP_MCBSP1 = 0,
OMAP_MCBSP2,
OMAP_MCBSP3,
+ OMAP_MCBSP4,
+ OMAP_MCBSP5
} omap_mcbsp_id;
typedef int __bitwise omap_mcbsp_io_type_t;
@@ -311,12 +326,10 @@ struct omap_mcbsp_spi_cfg {
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void (*free)(unsigned int);
- int (*check)(unsigned int);
};
struct omap_mcbsp_platform_data {
unsigned long phys_base;
- u32 virt_base;
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
@@ -326,7 +339,7 @@ struct omap_mcbsp_platform_data {
struct omap_mcbsp {
struct device *dev;
unsigned long phys_base;
- u32 io_base;
+ void __iomem *io_base;
u8 id;
u8 free;
omap_mcbsp_word_length rx_word_length;
@@ -354,6 +367,8 @@ struct omap_mcbsp {
struct omap_mcbsp_platform_data *pdata;
struct clk *clk;
};
+extern struct omap_mcbsp **mcbsp_ptr;
+extern int omap_mcbsp_count;
int omap_mcbsp_init(void);
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
@@ -378,5 +393,6 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
/* Polled read/write functions */
int omap_mcbsp_pollread(unsigned int id, u16 * buf);
int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index a325caf80d0..d40cac60b95 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,7 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 614b2c1327c..6bbf1789bed 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -125,20 +125,64 @@
.pu_pd_val = pull_mode, \
},
-
-#define PULL_DISABLED 0
-#define PULL_ENABLED 1
-
-#define PULL_DOWN 0
-#define PULL_UP 1
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA (1 << 3)
+#define OMAP2_PULL_UP (1 << 4)
+#define OMAP2_ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN (1 << 8)
+#define OMAP3_OFF_EN (1 << 9)
+#define OMAP3_OFFOUT_EN (1 << 10)
+#define OMAP3_OFFOUT_VAL (1 << 11)
+#define OMAP3_OFF_PULL_EN (1 << 12)
+#define OMAP3_OFF_PULL_UP (1 << 13)
+#define OMAP3_WAKEUP_EN (1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP34XX_MUX_MODE0 0
+#define OMAP34XX_MUX_MODE1 1
+#define OMAP34XX_MUX_MODE2 2
+#define OMAP34XX_MUX_MODE3 3
+#define OMAP34XX_MUX_MODE4 4
+#define OMAP34XX_MUX_MODE5 5
+#define OMAP34XX_MUX_MODE6 6
+#define OMAP34XX_MUX_MODE7 7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT 0
+#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+ | OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE 0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+ | OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+ | OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
+ .name = desc, \
+ .debug = 0, \
+ .mux_reg = reg_offset, \
+ .mux_val = mux_value \
+},
struct pin_config {
- char *name;
- unsigned char busy;
- unsigned char debug;
+ char *name;
+ const unsigned int mux_reg;
+ unsigned char debug;
- const char *mux_reg_name;
- const unsigned int mux_reg;
+#if defined(CONFIG_ARCH_OMAP34XX)
+ u16 mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
@@ -150,6 +194,12 @@ struct pin_config {
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
+#endif
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ const char *mux_reg_name;
+#endif
+
};
enum omap730_index {
@@ -593,6 +643,114 @@ enum omap24xx_index {
};
+enum omap34xx_index {
+ /* 34xx I2C */
+ K21_34XX_I2C1_SCL,
+ J21_34XX_I2C1_SDA,
+ AF15_34XX_I2C2_SCL,
+ AE15_34XX_I2C2_SDA,
+ AF14_34XX_I2C3_SCL,
+ AG14_34XX_I2C3_SDA,
+ AD26_34XX_I2C4_SCL,
+ AE26_34XX_I2C4_SDA,
+
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+ Y8_3430_USB1HS_PHY_CLK,
+ Y9_3430_USB1HS_PHY_STP,
+ AA14_3430_USB1HS_PHY_DIR,
+ AA11_3430_USB1HS_PHY_NXT,
+ W13_3430_USB1HS_PHY_DATA0,
+ W12_3430_USB1HS_PHY_DATA1,
+ W11_3430_USB1HS_PHY_DATA2,
+ Y11_3430_USB1HS_PHY_DATA3,
+ W9_3430_USB1HS_PHY_DATA4,
+ Y12_3430_USB1HS_PHY_DATA5,
+ W8_3430_USB1HS_PHY_DATA6,
+ Y13_3430_USB1HS_PHY_DATA7,
+
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+ AA8_3430_USB2HS_PHY_CLK,
+ AA10_3430_USB2HS_PHY_STP,
+ AA9_3430_USB2HS_PHY_DIR,
+ AB11_3430_USB2HS_PHY_NXT,
+ AB10_3430_USB2HS_PHY_DATA0,
+ AB9_3430_USB2HS_PHY_DATA1,
+ W3_3430_USB2HS_PHY_DATA2,
+ T4_3430_USB2HS_PHY_DATA3,
+ T3_3430_USB2HS_PHY_DATA4,
+ R3_3430_USB2HS_PHY_DATA5,
+ R4_3430_USB2HS_PHY_DATA6,
+ T2_3430_USB2HS_PHY_DATA7,
+
+
+ /* TLL - HSUSB: 12-pin TLL Port 1*/
+ Y8_3430_USB1HS_TLL_CLK,
+ Y9_3430_USB1HS_TLL_STP,
+ AA14_3430_USB1HS_TLL_DIR,
+ AA11_3430_USB1HS_TLL_NXT,
+ W13_3430_USB1HS_TLL_DATA0,
+ W12_3430_USB1HS_TLL_DATA1,
+ W11_3430_USB1HS_TLL_DATA2,
+ Y11_3430_USB1HS_TLL_DATA3,
+ W9_3430_USB1HS_TLL_DATA4,
+ Y12_3430_USB1HS_TLL_DATA5,
+ W8_3430_USB1HS_TLL_DATA6,
+ Y13_3430_USB1HS_TLL_DATA7,
+
+ /* TLL - HSUSB: 12-pin TLL Port 2*/
+ AA8_3430_USB2HS_TLL_CLK,
+ AA10_3430_USB2HS_TLL_STP,
+ AA9_3430_USB2HS_TLL_DIR,
+ AB11_3430_USB2HS_TLL_NXT,
+ AB10_3430_USB2HS_TLL_DATA0,
+ AB9_3430_USB2HS_TLL_DATA1,
+ W3_3430_USB2HS_TLL_DATA2,
+ T4_3430_USB2HS_TLL_DATA3,
+ T3_3430_USB2HS_TLL_DATA4,
+ R3_3430_USB2HS_TLL_DATA5,
+ R4_3430_USB2HS_TLL_DATA6,
+ T2_3430_USB2HS_TLL_DATA7,
+
+ /* TLL - HSUSB: 12-pin TLL Port 3*/
+ AA6_3430_USB3HS_TLL_CLK,
+ AB3_3430_USB3HS_TLL_STP,
+ AA3_3430_USB3HS_TLL_DIR,
+ Y3_3430_USB3HS_TLL_NXT,
+ AA5_3430_USB3HS_TLL_DATA0,
+ Y4_3430_USB3HS_TLL_DATA1,
+ Y5_3430_USB3HS_TLL_DATA2,
+ W5_3430_USB3HS_TLL_DATA3,
+ AB12_3430_USB3HS_TLL_DATA4,
+ AB13_3430_USB3HS_TLL_DATA5,
+ AA13_3430_USB3HS_TLL_DATA6,
+ AA12_3430_USB3HS_TLL_DATA7,
+
+ /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+ AF10_3430_USB1FS_PHY_MM1_RXDP,
+ AG9_3430_USB1FS_PHY_MM1_RXDM,
+ W13_3430_USB1FS_PHY_MM1_RXRCV,
+ W12_3430_USB1FS_PHY_MM1_TXSE0,
+ W11_3430_USB1FS_PHY_MM1_TXDAT,
+ Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+ AF7_3430_USB2FS_PHY_MM2_RXDP,
+ AH7_3430_USB2FS_PHY_MM2_RXDM,
+ AB10_3430_USB2FS_PHY_MM2_RXRCV,
+ AB9_3430_USB2FS_PHY_MM2_TXSE0,
+ W3_3430_USB2FS_PHY_MM2_TXDAT,
+ T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+ AH3_3430_USB3FS_PHY_MM3_RXDP,
+ AE3_3430_USB3FS_PHY_MM3_RXDM,
+ AD1_3430_USB3FS_PHY_MM3_RXRCV,
+ AE1_3430_USB3FS_PHY_MM3_TXSE0,
+ AD2_3430_USB3FS_PHY_MM3_TXDAT,
+ AC1_3430_USB3FS_PHY_MM3_TXEN_N,
+
+};
+
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38af8b2..d2400466813 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93afb278..0e69b504c25 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
@@ -190,7 +195,7 @@
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index bb8319d66e9..24335d4932f 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -39,7 +39,6 @@
/* interrupt controller */
#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
#define OMAP24XX_IVA_INTC_BASE 0x40000000
-#define IRQ_SIR_IRQ 0x0040
#define OMAP2420_CTRL_BASE L4_24XX_BASE
#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
@@ -48,6 +47,7 @@
#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
#define OMAP2420_SMS_BASE 0x68008000
+#define OMAP2420_GPMC_BASE 0x6800a000
#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d1307..ec67fb42860 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index bfa09325a5f..768eb6e7abc 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -39,11 +39,11 @@
* Register and offset definitions to be used in PM assembler code
* ----------------------------------------------------------------------------
*/
-#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00)
+#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00)
#define ARM_IDLECT1_ASM_OFFSET 0x04
#define ARM_IDLECT2_ASM_OFFSET 0x08
-#define TCMIF_ASM_BASE io_p2v(0xfffecc00)
+#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00)
#define EMIFS_CONFIG_ASM_OFFSET 0x0c
#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20
@@ -135,7 +135,8 @@ extern void omap_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
new file mode 100644
index 00000000000..2806a9c8e4d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -0,0 +1,166 @@
+/*
+ * OMAP2/3 powerdomain control
+ *
+ * Copyright (C) 2007-8 Texas Instruments, Inc.
+ * Copyright (C) 2007-8 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN
+#define ASM_ARM_ARCH_OMAP_POWERDOMAIN
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+#include <asm/atomic.h>
+
+#include <mach/cpu.h>
+
+
+/* Powerdomain basic power states */
+#define PWRDM_POWER_OFF 0x0
+#define PWRDM_POWER_RET 0x1
+#define PWRDM_POWER_INACTIVE 0x2
+#define PWRDM_POWER_ON 0x3
+
+/* Powerdomain allowable state bitfields */
+#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \
+ (1 << PWRDM_POWER_ON))
+
+#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \
+ (1 << PWRDM_POWER_RET))
+
+#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
+
+
+/* Powerdomain flags */
+#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */
+
+
+/*
+ * Number of memory banks that are power-controllable. On OMAP3430, the
+ * maximum is 4.
+ */
+#define PWRDM_MAX_MEM_BANKS 4
+
+/*
+ * Maximum number of clockdomains that can be associated with a powerdomain.
+ * CORE powerdomain is probably the worst case.
+ */
+#define PWRDM_MAX_CLKDMS 3
+
+/* XXX A completely arbitrary number. What is reasonable here? */
+#define PWRDM_TRANSITION_BAILOUT 100000
+
+struct clockdomain;
+struct powerdomain;
+
+/* Encodes dependencies between powerdomains - statically defined */
+struct pwrdm_dep {
+
+ /* Powerdomain name */
+ const char *pwrdm_name;
+
+ /* Powerdomain pointer - resolved by the powerdomain code */
+ struct powerdomain *pwrdm;
+
+ /* Flags to mark OMAP chip restrictions, etc. */
+ const struct omap_chip_id omap_chip;
+
+};
+
+struct powerdomain {
+
+ /* Powerdomain name */
+ const char *name;
+
+ /* the address offset from CM_BASE/PRM_BASE */
+ const s16 prcm_offs;
+
+ /* Used to represent the OMAP chip types containing this pwrdm */
+ const struct omap_chip_id omap_chip;
+
+ /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
+ const u8 dep_bit;
+
+ /* Powerdomains that can be told to wake this powerdomain up */
+ struct pwrdm_dep *wkdep_srcs;
+
+ /* Powerdomains that can be told to keep this pwrdm from inactivity */
+ struct pwrdm_dep *sleepdep_srcs;
+
+ /* Possible powerdomain power states */
+ const u8 pwrsts;
+
+ /* Possible logic power states when pwrdm in RETENTION */
+ const u8 pwrsts_logic_ret;
+
+ /* Powerdomain flags */
+ const u8 flags;
+
+ /* Number of software-controllable memory banks in this powerdomain */
+ const u8 banks;
+
+ /* Possible memory bank pwrstates when pwrdm in RETENTION */
+ const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
+
+ /* Possible memory bank pwrstates when pwrdm is ON */
+ const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
+
+ /* Clockdomains in this powerdomain */
+ struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
+
+ struct list_head node;
+
+};
+
+
+void pwrdm_init(struct powerdomain **pwrdm_list);
+
+int pwrdm_register(struct powerdomain *pwrdm);
+int pwrdm_unregister(struct powerdomain *pwrdm);
+struct powerdomain *pwrdm_lookup(const char *name);
+
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
+
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+ int (*fn)(struct powerdomain *pwrdm,
+ struct clockdomain *clkdm));
+
+int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
+
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
+
+int pwrdm_wait_transition(struct powerdomain *pwrdm);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 787b7acec54..a98c6c3beb2 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
@@ -63,9 +65,9 @@
*/
-#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index cc6bfa51ccb..8a676a04be4 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -20,18 +20,24 @@
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#elif defined(CONFIG_ARCH_OMAP3)
+/* OMAP3 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x49020000
#endif
#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
+#define OMAP24XX_BASE_BAUD (48000000/16)
-#define is_omap_port(p) ({int __ret = 0; \
- if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
- p == IO_ADDRESS(OMAP_UART2_BASE) || \
- p == IO_ADDRESS(OMAP_UART3_BASE)) \
- __ret = 1; \
- __ret; \
+#define is_omap_port(pt) ({int __ret = 0; \
+ if ((pt)->port.mapbase == OMAP_UART1_BASE || \
+ (pt)->port.mapbase == OMAP_UART2_BASE || \
+ (pt)->port.mapbase == OMAP_UART3_BASE) \
+ __ret = 1; \
+ __ret; \
})
#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index e0932344998..ab35d622dcf 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2);
+
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
@@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06a28c7b98d..06923f26154 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode)
static inline void arch_reset(char mode)
{
- if (!cpu_is_omap24xx())
+ if (!cpu_class_is_omap2())
omap1_arch_reset(mode);
else
omap_prcm_arch_reset(mode);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
new file mode 100644
index 00000000000..af326efc1ad
--- /dev/null
+++ b/arch/arm/plat-omap/io.c
@@ -0,0 +1,107 @@
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
+#include <mach/omap730.h>
+#include <mach/omap1510.h>
+#include <mach/omap16xx.h>
+#include <mach/omap24xx.h>
+#include <mach/omap34xx.h>
+
+#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+#ifdef CONFIG_ARCH_OMAP1
+ if (cpu_class_is_omap1()) {
+ if (BETWEEN(p, IO_PHYS, IO_SIZE))
+ return XLATE(p, IO_PHYS, IO_VIRT);
+ }
+ if (cpu_is_omap730()) {
+ if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
+ return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+
+ if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
+ return XLATE(p, OMAP730_DSPREG_BASE,
+ OMAP730_DSPREG_START);
+ }
+ if (cpu_is_omap15xx()) {
+ if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
+ return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);
+
+ if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
+ return XLATE(p, OMAP1510_DSPREG_BASE,
+ OMAP1510_DSPREG_START);
+ }
+ if (cpu_is_omap16xx()) {
+ if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
+ return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);
+
+ if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
+ return XLATE(p, OMAP16XX_DSPREG_BASE,
+ OMAP16XX_DSPREG_START);
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP2
+ if (cpu_is_omap24xx()) {
+ if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
+ return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
+ if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
+ return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
+ }
+ if (cpu_is_omap2420()) {
+ if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
+ return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
+ if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
+ return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
+ if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
+ return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+ }
+ if (cpu_is_omap2430()) {
+ if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
+ return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
+ if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
+ return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+ if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
+ return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
+ if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
+ return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ if (cpu_is_omap34xx()) {
+ if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
+ return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
+ if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+ return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+ if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
+ return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
+ if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
+ return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
+ if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
+ return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
+ if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
+ return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
+ if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
+ return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
+ if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
+ return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
+ }
+#endif
+
+ return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(omap_ioremap);
+
+void omap_iounmap(volatile void __iomem *addr)
+{
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
+}
+EXPORT_SYMBOL(omap_iounmap);
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 1d7aec1a691..b52ce053e6f 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -30,7 +30,7 @@
#include <linux/blkdev.h>
#include <linux/err.h>
#include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/mailbox.h>
#include "mailbox.h"
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 014d26574bb..af33fc713e1 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -27,43 +27,65 @@
#include <mach/dma.h>
#include <mach/mcbsp.h>
-static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
+struct omap_mcbsp **mcbsp_ptr;
+int omap_mcbsp_count;
-#define omap_mcbsp_check_valid_id(id) (mcbsp[id].pdata && \
- mcbsp[id].pdata->ops && \
- mcbsp[id].pdata->ops->check && \
- (mcbsp[id].pdata->ops->check(id) == 0))
+void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val)
+{
+ if (cpu_class_is_omap1() || cpu_is_omap2420())
+ __raw_writew((u16)val, io_base + reg);
+ else
+ __raw_writel(val, io_base + reg);
+}
+
+int omap_mcbsp_read(void __iomem *io_base, u16 reg)
+{
+ if (cpu_class_is_omap1() || cpu_is_omap2420())
+ return __raw_readw(io_base + reg);
+ else
+ return __raw_readl(io_base + reg);
+}
+
+#define OMAP_MCBSP_READ(base, reg) \
+ omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val) \
+ omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val)
+
+#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
static void omap_mcbsp_dump_reg(u8 id)
{
- dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id);
- dev_dbg(mcbsp[id].dev, "DRR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
- dev_dbg(mcbsp[id].dev, "DRR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
- dev_dbg(mcbsp[id].dev, "DXR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
- dev_dbg(mcbsp[id].dev, "DXR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
- dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
- dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
- dev_dbg(mcbsp[id].dev, "RCR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
- dev_dbg(mcbsp[id].dev, "RCR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
- dev_dbg(mcbsp[id].dev, "XCR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
- dev_dbg(mcbsp[id].dev, "XCR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
- dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
- dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
- dev_dbg(mcbsp[id].dev, "PCR0: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
- dev_dbg(mcbsp[id].dev, "***********************\n");
+ struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
+
+ dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
+ dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, DRR2));
+ dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, DRR1));
+ dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, DXR2));
+ dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, DXR1));
+ dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, SPCR2));
+ dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, SPCR1));
+ dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, RCR2));
+ dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, RCR1));
+ dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, XCR2));
+ dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, XCR1));
+ dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, SRGR2));
+ dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, SRGR1));
+ dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n",
+ OMAP_MCBSP_READ(mcbsp->io_base, PCR0));
+ dev_dbg(mcbsp->dev, "***********************\n");
}
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
@@ -126,16 +148,18 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
*/
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
{
- u32 io_base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp[id].io_base;
- dev_dbg(mcbsp[id].dev, "Configuring McBSP%d io_base: 0x%8x\n",
- mcbsp[id].id, io_base);
+ io_base = mcbsp->io_base;
+ dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n",
+ mcbsp->id, mcbsp->phys_base);
/* We write the given config */
OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
@@ -158,23 +182,26 @@ EXPORT_SYMBOL(omap_mcbsp_config);
*/
int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
{
+ struct omap_mcbsp *mcbsp;
+
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- spin_lock(&mcbsp[id].lock);
+ spin_lock(&mcbsp->lock);
- if (!mcbsp[id].free) {
- dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
- mcbsp[id].id);
- spin_unlock(&mcbsp[id].lock);
+ if (!mcbsp->free) {
+ dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
+ mcbsp->id);
+ spin_unlock(&mcbsp->lock);
return -EINVAL;
}
- mcbsp[id].io_type = io_type;
+ mcbsp->io_type = io_type;
- spin_unlock(&mcbsp[id].lock);
+ spin_unlock(&mcbsp->lock);
return 0;
}
@@ -182,53 +209,60 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
int omap_mcbsp_request(unsigned int id)
{
+ struct omap_mcbsp *mcbsp;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp[id].pdata->ops->request)
- mcbsp[id].pdata->ops->request(id);
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+ mcbsp->pdata->ops->request(id);
- clk_enable(mcbsp[id].clk);
+ clk_enable(mcbsp->clk);
- spin_lock(&mcbsp[id].lock);
- if (!mcbsp[id].free) {
- dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n",
- mcbsp[id].id);
- spin_unlock(&mcbsp[id].lock);
+ spin_lock(&mcbsp->lock);
+ if (!mcbsp->free) {
+ dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
+ mcbsp->id);
+ spin_unlock(&mcbsp->lock);
return -1;
}
- mcbsp[id].free = 0;
- spin_unlock(&mcbsp[id].lock);
+ mcbsp->free = 0;
+ spin_unlock(&mcbsp->lock);
+
+ /*
+ * Make sure that transmitter, receiver and sample-rate generator are
+ * not running before activating IRQs.
+ */
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0);
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0);
- if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
+ if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
/* We need to get IRQs here */
- err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler,
- 0, "McBSP", (void *) (&mcbsp[id]));
+ init_completion(&mcbsp->tx_irq_completion);
+ err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
+ 0, "McBSP", (void *)mcbsp);
if (err != 0) {
- dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d "
- "for McBSP%d\n", mcbsp[id].tx_irq,
- mcbsp[id].id);
+ dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
+ "for McBSP%d\n", mcbsp->tx_irq,
+ mcbsp->id);
return err;
}
- init_completion(&(mcbsp[id].tx_irq_completion));
-
- err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler,
- 0, "McBSP", (void *) (&mcbsp[id]));
+ init_completion(&mcbsp->rx_irq_completion);
+ err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler,
+ 0, "McBSP", (void *)mcbsp);
if (err != 0) {
- dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d "
- "for McBSP%d\n", mcbsp[id].rx_irq,
- mcbsp[id].id);
- free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+ dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
+ "for McBSP%d\n", mcbsp->rx_irq,
+ mcbsp->id);
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
return err;
}
-
- init_completion(&(mcbsp[id].rx_irq_completion));
}
return 0;
@@ -237,31 +271,34 @@ EXPORT_SYMBOL(omap_mcbsp_request);
void omap_mcbsp_free(unsigned int id)
{
+ struct omap_mcbsp *mcbsp;
+
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp[id].pdata->ops->free)
- mcbsp[id].pdata->ops->free(id);
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+ mcbsp->pdata->ops->free(id);
- clk_disable(mcbsp[id].clk);
+ clk_disable(mcbsp->clk);
- spin_lock(&mcbsp[id].lock);
- if (mcbsp[id].free) {
- dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n",
- mcbsp[id].id);
- spin_unlock(&mcbsp[id].lock);
+ spin_lock(&mcbsp->lock);
+ if (mcbsp->free) {
+ dev_err(mcbsp->dev, "McBSP%d was not reserved\n",
+ mcbsp->id);
+ spin_unlock(&mcbsp->lock);
return;
}
- mcbsp[id].free = 1;
- spin_unlock(&mcbsp[id].lock);
+ mcbsp->free = 1;
+ spin_unlock(&mcbsp->lock);
- if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) {
+ if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
/* Free IRQs */
- free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id]));
- free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+ free_irq(mcbsp->rx_irq, (void *)mcbsp);
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
}
}
EXPORT_SYMBOL(omap_mcbsp_free);
@@ -273,18 +310,19 @@ EXPORT_SYMBOL(omap_mcbsp_free);
*/
void omap_mcbsp_start(unsigned int id)
{
- u32 io_base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
- io_base = mcbsp[id].io_base;
-
- mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
- mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
+ mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
+ mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
/* Start the sample generator */
w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -310,7 +348,8 @@ EXPORT_SYMBOL(omap_mcbsp_start);
void omap_mcbsp_stop(unsigned int id)
{
- u32 io_base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -318,7 +357,8 @@ void omap_mcbsp_stop(unsigned int id)
return;
}
- io_base = mcbsp[id].io_base;
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
/* Reset transmitter */
w = OMAP_MCBSP_READ(io_base, SPCR2);
@@ -337,14 +377,17 @@ EXPORT_SYMBOL(omap_mcbsp_stop);
/* polled mcbsp i/o operations */
int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
{
- u32 base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *base;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
- base = mcbsp[id].io_base;
+ mcbsp = id_to_mcbsp_ptr(id);
+ base = mcbsp->io_base;
+
writew(buf, base + OMAP_MCBSP_REG_DXR1);
/* if frame sync error - clear the error */
if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
@@ -366,8 +409,8 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
(XRST),
base + OMAP_MCBSP_REG_SPCR2);
udelay(10);
- dev_err(mcbsp[id].dev, "Could not write to"
- " McBSP%d Register\n", mcbsp[id].id);
+ dev_err(mcbsp->dev, "Could not write to"
+ " McBSP%d Register\n", mcbsp->id);
return -2;
}
}
@@ -379,14 +422,16 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite);
int omap_mcbsp_pollread(unsigned int id, u16 *buf)
{
- u32 base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *base;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- base = mcbsp[id].io_base;
+ base = mcbsp->io_base;
/* if frame sync error - clear the error */
if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
/* clear error */
@@ -407,8 +452,8 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
(RRST),
base + OMAP_MCBSP_REG_SPCR1);
udelay(10);
- dev_err(mcbsp[id].dev, "Could not read from"
- " McBSP%d Register\n", mcbsp[id].id);
+ dev_err(mcbsp->dev, "Could not read from"
+ " McBSP%d Register\n", mcbsp->id);
return -2;
}
}
@@ -424,7 +469,8 @@ EXPORT_SYMBOL(omap_mcbsp_pollread);
*/
void omap_mcbsp_xmit_word(unsigned int id, u32 word)
{
- u32 io_base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
omap_mcbsp_word_length word_length;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -432,10 +478,11 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
return;
}
- io_base = mcbsp[id].io_base;
- word_length = mcbsp[id].tx_word_length;
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+ word_length = mcbsp->tx_word_length;
- wait_for_completion(&(mcbsp[id].tx_irq_completion));
+ wait_for_completion(&mcbsp->tx_irq_completion);
if (word_length > OMAP_MCBSP_WORD_16)
OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
@@ -445,7 +492,8 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word);
u32 omap_mcbsp_recv_word(unsigned int id)
{
- u32 io_base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
u16 word_lsb, word_msb = 0;
omap_mcbsp_word_length word_length;
@@ -453,11 +501,12 @@ u32 omap_mcbsp_recv_word(unsigned int id)
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- word_length = mcbsp[id].rx_word_length;
- io_base = mcbsp[id].io_base;
+ word_length = mcbsp->rx_word_length;
+ io_base = mcbsp->io_base;
- wait_for_completion(&(mcbsp[id].rx_irq_completion));
+ wait_for_completion(&mcbsp->rx_irq_completion);
if (word_length > OMAP_MCBSP_WORD_16)
word_msb = OMAP_MCBSP_READ(io_base, DRR2);
@@ -469,7 +518,8 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word);
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
{
- u32 io_base;
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
omap_mcbsp_word_length tx_word_length;
omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -478,10 +528,10 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
-
- io_base = mcbsp[id].io_base;
- tx_word_length = mcbsp[id].tx_word_length;
- rx_word_length = mcbsp[id].rx_word_length;
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+ tx_word_length = mcbsp->tx_word_length;
+ rx_word_length = mcbsp->rx_word_length;
if (tx_word_length != rx_word_length)
return -EINVAL;
@@ -496,8 +546,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
udelay(10);
- dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
- "ready\n", mcbsp[id].id);
+ dev_err(mcbsp->dev, "McBSP%d transmitter not "
+ "ready\n", mcbsp->id);
return -EAGAIN;
}
}
@@ -517,8 +567,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
udelay(10);
- dev_err(mcbsp[id].dev, "McBSP%d receiver not "
- "ready\n", mcbsp[id].id);
+ dev_err(mcbsp->dev, "McBSP%d receiver not "
+ "ready\n", mcbsp->id);
return -EAGAIN;
}
}
@@ -534,7 +584,9 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
{
- u32 io_base, clock_word = 0;
+ struct omap_mcbsp *mcbsp;
+ u32 clock_word = 0;
+ void __iomem *io_base;
omap_mcbsp_word_length tx_word_length;
omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -544,9 +596,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
return -ENODEV;
}
- io_base = mcbsp[id].io_base;
- tx_word_length = mcbsp[id].tx_word_length;
- rx_word_length = mcbsp[id].rx_word_length;
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+
+ tx_word_length = mcbsp->tx_word_length;
+ rx_word_length = mcbsp->rx_word_length;
if (tx_word_length != rx_word_length)
return -EINVAL;
@@ -561,8 +615,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
udelay(10);
- dev_err(mcbsp[id].dev, "McBSP%d transmitter not "
- "ready\n", mcbsp[id].id);
+ dev_err(mcbsp->dev, "McBSP%d transmitter not "
+ "ready\n", mcbsp->id);
return -EAGAIN;
}
}
@@ -582,8 +636,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
udelay(10);
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
udelay(10);
- dev_err(mcbsp[id].dev, "McBSP%d receiver not "
- "ready\n", mcbsp[id].id);
+ dev_err(mcbsp->dev, "McBSP%d receiver not "
+ "ready\n", mcbsp->id);
return -EAGAIN;
}
}
@@ -609,6 +663,7 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
unsigned int length)
{
+ struct omap_mcbsp *mcbsp;
int dma_tx_ch;
int src_port = 0;
int dest_port = 0;
@@ -618,50 +673,51 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
+ if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX",
omap_mcbsp_tx_dma_callback,
- &mcbsp[id],
+ mcbsp,
&dma_tx_ch)) {
- dev_err(mcbsp[id].dev, " Unable to request DMA channel for "
+ dev_err(mcbsp->dev, " Unable to request DMA channel for "
"McBSP%d TX. Trying IRQ based TX\n",
- mcbsp[id].id);
+ mcbsp->id);
return -EAGAIN;
}
- mcbsp[id].dma_tx_lch = dma_tx_ch;
+ mcbsp->dma_tx_lch = dma_tx_ch;
- dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id,
+ dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id,
dma_tx_ch);
- init_completion(&(mcbsp[id].tx_dma_completion));
+ init_completion(&mcbsp->tx_dma_completion);
if (cpu_class_is_omap1()) {
src_port = OMAP_DMA_PORT_TIPB;
dest_port = OMAP_DMA_PORT_EMIFF;
}
if (cpu_class_is_omap2())
- sync_dev = mcbsp[id].dma_tx_sync;
+ sync_dev = mcbsp->dma_tx_sync;
- omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
+ omap_set_dma_transfer_params(mcbsp->dma_tx_lch,
OMAP_DMA_DATA_TYPE_S16,
length >> 1, 1,
OMAP_DMA_SYNC_ELEMENT,
sync_dev, 0);
- omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
+ omap_set_dma_dest_params(mcbsp->dma_tx_lch,
src_port,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
+ mcbsp->phys_base + OMAP_MCBSP_REG_DXR1,
0, 0);
- omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
+ omap_set_dma_src_params(mcbsp->dma_tx_lch,
dest_port,
OMAP_DMA_AMODE_POST_INC,
buffer,
0, 0);
- omap_start_dma(mcbsp[id].dma_tx_lch);
- wait_for_completion(&(mcbsp[id].tx_dma_completion));
+ omap_start_dma(mcbsp->dma_tx_lch);
+ wait_for_completion(&mcbsp->tx_dma_completion);
return 0;
}
@@ -670,6 +726,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
unsigned int length)
{
+ struct omap_mcbsp *mcbsp;
int dma_rx_ch;
int src_port = 0;
int dest_port = 0;
@@ -679,50 +736,51 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
+ mcbsp = id_to_mcbsp_ptr(id);
- if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
+ if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX",
omap_mcbsp_rx_dma_callback,
- &mcbsp[id],
+ mcbsp,
&dma_rx_ch)) {
- dev_err(mcbsp[id].dev, "Unable to request DMA channel for "
+ dev_err(mcbsp->dev, "Unable to request DMA channel for "
"McBSP%d RX. Trying IRQ based RX\n",
- mcbsp[id].id);
+ mcbsp->id);
return -EAGAIN;
}
- mcbsp[id].dma_rx_lch = dma_rx_ch;
+ mcbsp->dma_rx_lch = dma_rx_ch;
- dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id,
+ dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id,
dma_rx_ch);
- init_completion(&(mcbsp[id].rx_dma_completion));
+ init_completion(&mcbsp->rx_dma_completion);
if (cpu_class_is_omap1()) {
src_port = OMAP_DMA_PORT_TIPB;
dest_port = OMAP_DMA_PORT_EMIFF;
}
if (cpu_class_is_omap2())
- sync_dev = mcbsp[id].dma_rx_sync;
+ sync_dev = mcbsp->dma_rx_sync;
- omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
+ omap_set_dma_transfer_params(mcbsp->dma_rx_lch,
OMAP_DMA_DATA_TYPE_S16,
length >> 1, 1,
OMAP_DMA_SYNC_ELEMENT,
sync_dev, 0);
- omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
+ omap_set_dma_src_params(mcbsp->dma_rx_lch,
src_port,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
+ mcbsp->phys_base + OMAP_MCBSP_REG_DRR1,
0, 0);
- omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
+ omap_set_dma_dest_params(mcbsp->dma_rx_lch,
dest_port,
OMAP_DMA_AMODE_POST_INC,
buffer,
0, 0);
- omap_start_dma(mcbsp[id].dma_rx_lch);
- wait_for_completion(&(mcbsp[id].rx_dma_completion));
+ omap_start_dma(mcbsp->dma_rx_lch);
+ wait_for_completion(&mcbsp->rx_dma_completion);
return 0;
}
@@ -737,12 +795,14 @@ EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
void omap_mcbsp_set_spi_mode(unsigned int id,
const struct omap_mcbsp_spi_cfg *spi_cfg)
{
+ struct omap_mcbsp *mcbsp;
struct omap_mcbsp_reg_cfg mcbsp_cfg;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
+ mcbsp = id_to_mcbsp_ptr(id);
memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
@@ -803,9 +863,10 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
*/
-static int __init omap_mcbsp_probe(struct platform_device *pdev)
+static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
{
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
+ struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
int ret = 0;
@@ -818,47 +879,63 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
- if (id >= OMAP_MAX_MCBSP_COUNT) {
+ if (id >= omap_mcbsp_count) {
dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
ret = -EINVAL;
goto exit;
}
- spin_lock_init(&mcbsp[id].lock);
- mcbsp[id].id = id + 1;
- mcbsp[id].free = 1;
- mcbsp[id].dma_tx_lch = -1;
- mcbsp[id].dma_rx_lch = -1;
+ mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL);
+ if (!mcbsp) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+ mcbsp_ptr[id] = mcbsp;
+
+ spin_lock_init(&mcbsp->lock);
+ mcbsp->id = id + 1;
+ mcbsp->free = 1;
+ mcbsp->dma_tx_lch = -1;
+ mcbsp->dma_rx_lch = -1;
+
+ mcbsp->phys_base = pdata->phys_base;
+ mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K);
+ if (!mcbsp->io_base) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
- mcbsp[id].phys_base = pdata->phys_base;
- mcbsp[id].io_base = pdata->virt_base;
/* Default I/O is IRQ based */
- mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
- mcbsp[id].tx_irq = pdata->tx_irq;
- mcbsp[id].rx_irq = pdata->rx_irq;
- mcbsp[id].dma_rx_sync = pdata->dma_rx_sync;
- mcbsp[id].dma_tx_sync = pdata->dma_tx_sync;
+ mcbsp->io_type = OMAP_MCBSP_IRQ_IO;
+ mcbsp->tx_irq = pdata->tx_irq;
+ mcbsp->rx_irq = pdata->rx_irq;
+ mcbsp->dma_rx_sync = pdata->dma_rx_sync;
+ mcbsp->dma_tx_sync = pdata->dma_tx_sync;
if (pdata->clk_name)
- mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name);
- if (IS_ERR(mcbsp[id].clk)) {
- mcbsp[id].free = 0;
+ mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(mcbsp->clk)) {
dev_err(&pdev->dev,
"Invalid clock configuration for McBSP%d.\n",
- mcbsp[id].id);
- ret = -EINVAL;
- goto exit;
+ mcbsp->id);
+ ret = PTR_ERR(mcbsp->clk);
+ goto err_clk;
}
- mcbsp[id].pdata = pdata;
- mcbsp[id].dev = &pdev->dev;
- platform_set_drvdata(pdev, &mcbsp[id]);
+ mcbsp->pdata = pdata;
+ mcbsp->dev = &pdev->dev;
+ platform_set_drvdata(pdev, mcbsp);
+ return 0;
+err_clk:
+ iounmap(mcbsp->io_base);
+err_ioremap:
+ mcbsp->free = 0;
exit:
return ret;
}
-static int omap_mcbsp_remove(struct platform_device *pdev)
+static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
{
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
@@ -872,6 +949,8 @@ static int omap_mcbsp_remove(struct platform_device *pdev)
clk_disable(mcbsp->clk);
clk_put(mcbsp->clk);
+ iounmap(mcbsp->io_base);
+
mcbsp->clk = NULL;
mcbsp->free = 0;
mcbsp->dev = NULL;
@@ -882,7 +961,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev)
static struct platform_driver omap_mcbsp_driver = {
.probe = omap_mcbsp_probe,
- .remove = omap_mcbsp_remove,
+ .remove = __devexit_p(omap_mcbsp_remove),
.driver = {
.name = "omap-mcbsp",
},
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 847df208c46..80b040fd5ca 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -25,8 +25,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/io.h>
#include <linux/spinlock.h>
#include <mach/mux.h>
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 8bdbf979a25..ebe0c73c890 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -31,8 +31,8 @@
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/hardware.h>
#define OCPI_BASE 0xfffec320
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index ac67eeb6ca6..9f9a921829c 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -15,9 +15,9 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
@@ -271,7 +271,7 @@ int __init omap1_sram_init(void)
#define omap1_sram_init() do {} while (0)
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
@@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void)
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
-u32 omap2_sram_reprogram_gpmc(u32 perf_level)
-{
- if (!_omap2_sram_reprogram_gpmc)
- omap_sram_error();
-
- return _omap2_sram_reprogram_gpmc(perf_level);
-}
-
-static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
- u32 freqsel, u32 m2);
-u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb,
+ u32 m2);
+u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2)
{
- if (!_omap2_sram_configure_core_dpll)
+ if (!_omap3_sram_configure_core_dpll)
omap_sram_error();
- return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+ return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
+ sdrc_actim_ctrla,
+ sdrc_actim_ctrlb, m2);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -376,31 +372,16 @@ void restore_sram_functions(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
- _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
- omap34xx_sram_reprogram_gpmc_sz);
-
- _omap2_sram_configure_core_dpll =
- omap_sram_push(omap34xx_sram_configure_core_dpll,
- omap34xx_sram_configure_core_dpll_sz);
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
}
int __init omap34xx_sram_init(void)
{
- _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
- omap34xx_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
- omap34xx_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
- omap34xx_sram_set_prcm_sz);
-
- _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
- omap34xx_sram_reprogram_gpmc_sz);
-
- _omap2_sram_configure_core_dpll =
- omap_sram_push(omap34xx_sram_configure_core_dpll,
- omap34xx_sram_configure_core_dpll_sz);
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
return 0;
}
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 777485e0636..67ca1e216df 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -27,8 +27,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <mach/hardware.h>
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index f333b64512b..a005ddbd9ef 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -39,10 +39,10 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index ebdf6cd832a..3098736c65d 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -25,6 +25,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,7 +33,6 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 51aea671075..22a329513c0 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -29,11 +29,11 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/delay.h>
#include <asm/cacheflush.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 8cf4b1b32b0..e93f8bf6d33 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -19,13 +19,13 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/fb.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 390ff9f478b..1baf941d193 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -26,11 +26,11 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/dma.h>
#include <asm/mach/dma.h>
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index dd27334e3d7..4a899c279eb 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -26,10 +26,10 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 25d532490b4..963f7a4f26f 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -55,10 +55,10 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
@@ -468,7 +468,6 @@ static void s3c_irq_demux_adc(unsigned int irq,
{
unsigned int subsrc, submsk;
unsigned int offset = 9;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -482,12 +481,10 @@ static void s3c_irq_demux_adc(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
- mydesc = irq_desc + IRQ_TC;
- desc_handle_irq(IRQ_TC, mydesc);
+ generic_handle_irq(IRQ_TC);
}
if (subsrc & 2) {
- mydesc = irq_desc + IRQ_ADC;
- desc_handle_irq(IRQ_ADC, mydesc);
+ generic_handle_irq(IRQ_ADC);
}
}
}
@@ -496,7 +493,6 @@ static void s3c_irq_demux_uart(unsigned int start)
{
unsigned int subsrc, submsk;
unsigned int offset = start - IRQ_S3CUART_RX0;
- struct irq_desc *desc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -512,20 +508,14 @@ static void s3c_irq_demux_uart(unsigned int start)
subsrc &= 7;
if (subsrc != 0) {
- desc = irq_desc + start;
-
if (subsrc & 1)
- desc_handle_irq(start, desc);
-
- desc++;
+ generic_handle_irq(start);
if (subsrc & 2)
- desc_handle_irq(start+1, desc);
-
- desc++;
+ generic_handle_irq(start+1);
if (subsrc & 4)
- desc_handle_irq(start+2, desc);
+ generic_handle_irq(start+2);
}
}
@@ -572,7 +562,7 @@ s3c_irq_demux_extint8(unsigned int irq,
eintpnd &= ~(1<<irq);
irq += (IRQ_EINT4 - 4);
- desc_handle_irq(irq, irq_desc + irq);
+ generic_handle_irq(irq);
}
}
@@ -595,7 +585,7 @@ s3c_irq_demux_extint4t7(unsigned int irq,
irq += (IRQ_EINT4 - 4);
- desc_handle_irq(irq, irq_desc + irq);
+ generic_handle_irq(irq);
}
}
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index ef602971041..21dfa74773d 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -20,12 +20,12 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index d937ff1a9ac..8efb57ad501 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -35,10 +35,10 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index b998ee62447..7c09773ff9f 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -33,11 +33,11 @@
#include <linux/ioport.h>
#include <linux/mutex.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 3520a093ef8..0902afd227c 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -24,10 +24,10 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/mach/irq.h>
@@ -44,7 +44,6 @@ static void s3c_irq_demux_cam(unsigned int irq,
struct irq_desc *desc)
{
unsigned int subsrc, submsk;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -58,12 +57,10 @@ static void s3c_irq_demux_cam(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
- mydesc = irq_desc + IRQ_S3C2440_CAM_C;
- desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc);
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
}
if (subsrc & 2) {
- mydesc = irq_desc + IRQ_S3C2440_CAM_P;
- desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc);
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
}
}
}
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index e94721fad41..c0344fac4a9 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -20,13 +20,13 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 0bba4bf25a9..c51916236ac 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -25,12 +25,12 @@
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 56281c030a7..43aa2020f85 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Wed Aug 13 21:56:02 2008
+# Last update: Thu Sep 25 10:10:50 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1810,7 +1810,7 @@ kriss_sensor MACH_KRISS_SENSOR KRISS_SENSOR 1819
pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820
jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
-gprisc3 MACH_GPRISC4 GPRISC4 1823
+gprisc3 MACH_GPRISC3 GPRISC3 1823
stamp9260 MACH_STAMP9260 STAMP9260 1824
smdk6430 MACH_SMDK6430 SMDK6430 1825
smdkc100 MACH_SMDKC100 SMDKC100 1826
@@ -1859,5 +1859,43 @@ kbio9260 MACH_KBIO9260 KBIO9260 1868
ginza MACH_GINZA GINZA 1869
a636n MACH_A636N A636N 1870
imx27ipcam MACH_IMX27IPCAM IMX27IPCAM 1871
-nenoc MACH_NEMOC NEMOC 1872
+nemoc MACH_NEMOC NEMOC 1872
geneva MACH_GENEVA GENEVA 1873
+htcpharos MACH_HTCPHAROS HTCPHAROS 1874
+neonc MACH_NEONC NEONC 1875
+nas7100 MACH_NAS7100 NAS7100 1876
+teuphone MACH_TEUPHONE TEUPHONE 1877
+annax_eth2 MACH_ANNAX_ETH2 ANNAX_ETH2 1878
+csb733 MACH_CSB733 CSB733 1879
+bk3 MACH_BK3 BK3 1880
+omap_em32 MACH_OMAP_EM32 OMAP_EM32 1881
+et9261cp MACH_ET9261CP ET9261CP 1882
+jasperc MACH_JASPERC JASPERC 1883
+issi_arm9 MACH_ISSI_ARM9 ISSI_ARM9 1884
+ued MACH_UED UED 1885
+esiblade MACH_ESIBLADE ESIBLADE 1886
+eye02 MACH_EYE02 EYE02 1887
+imx27kbd MACH_IMX27KBD IMX27KBD 1888
+sst61vc010_fpga MACH_SST61VC010_FPGA SST61VC010_FPGA 1889
+kixvp435 MACH_KIXVP435 KIXVP435 1890
+kixnp435 MACH_KIXNP435 KIXNP435 1891
+africa MACH_AFRICA AFRICA 1892
+nh233 MACH_NH233 NH233 1893
+rd88f6183ap_ge MACH_RD88F6183AP_GE RD88F6183AP_GE 1894
+bcm4760 MACH_BCM4760 BCM4760 1895
+eddy_v2 MACH_EDDY_V2 EDDY_V2 1896
+realview_pba8 MACH_REALVIEW_PBA8 REALVIEW_PBA8 1897
+hid_a7 MACH_HID_A7 HID_A7 1898
+hero MACH_HERO HERO 1899
+omap_poseidon MACH_OMAP_POSEIDON OMAP_POSEIDON 1900
+realview_pbx MACH_REALVIEW_PBX REALVIEW_PBX 1901
+micro9s MACH_MICRO9S MICRO9S 1902
+mako MACH_MAKO MAKO 1903
+xdaflame MACH_XDAFLAME XDAFLAME 1904
+phidget_sbc2 MACH_PHIDGET_SBC2 PHIDGET_SBC2 1905
+limestone MACH_LIMESTONE LIMESTONE 1906
+iprobe_c32 MACH_IPROBE_C32 IPROBE_C32 1907
+rut100 MACH_RUT100 RUT100 1908
+asusp535 MACH_ASUSP535 ASUSP535 1909
+htcraphael MACH_HTCRAPHAEL HTCRAPHAEL 1910
+sygdg1 MACH_SYGDG1 SYGDG1 1911
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 806ce26d524..ba592a9e6fb 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -21,13 +21,13 @@
#include <asm/assembler.h>
#include <asm/vfpmacros.h>
- .globl do_vfp
-do_vfp:
+ENTRY(do_vfp)
enable_irq
ldr r4, .LCvfp
ldr r11, [r10, #TI_CPU] @ CPU number
add r10, r10, #TI_VFPSTATE @ r10 = workspace
ldr pc, [r4] @ call VFP entry point
+ENDPROC(do_vfp)
ENTRY(vfp_null_entry)
mov pc, lr
@@ -40,11 +40,11 @@ ENDPROC(vfp_null_entry)
@ failure to the VFP initialisation code.
__INIT
- .globl vfp_testing_entry
-vfp_testing_entry:
+ENTRY(vfp_testing_entry)
ldr r0, VFP_arch_address
str r5, [r0] @ known non-zero value
mov pc, r9 @ we have handled the fault
+ENDPROC(vfp_testing_entry)
VFP_arch_address:
.word VFP_arch
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 353f9e5c791..a62dcf7098b 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -68,8 +68,7 @@
@ r11 = CPU number
@ lr = failure return
- .globl vfp_support_entry
-vfp_support_entry:
+ENTRY(vfp_support_entry)
DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
VFPFMRX r1, FPEXC @ Is the VFP enabled?
@@ -165,11 +164,10 @@ process_exception:
@ code will raise an exception if
@ required. If not, the user code will
@ retry the faulted instruction
+ENDPROC(vfp_support_entry)
#ifdef CONFIG_SMP
- .globl vfp_save_state
- .type vfp_save_state, %function
-vfp_save_state:
+ENTRY(vfp_save_state)
@ Save the current VFP state
@ r0 - save location
@ r1 - FPEXC
@@ -182,13 +180,13 @@ vfp_save_state:
VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present)
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
+ENDPROC(vfp_save_state)
#endif
last_VFP_context_address:
.word last_VFP_context
- .globl vfp_get_float
-vfp_get_float:
+ENTRY(vfp_get_float)
add pc, pc, r0, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -197,9 +195,9 @@ vfp_get_float:
mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
mov pc, lr
.endr
+ENDPROC(vfp_get_float)
- .globl vfp_put_float
-vfp_put_float:
+ENTRY(vfp_put_float)
add pc, pc, r1, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -208,9 +206,9 @@ vfp_put_float:
mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
mov pc, lr
.endr
+ENDPROC(vfp_put_float)
- .globl vfp_get_double
-vfp_get_double:
+ENTRY(vfp_get_double)
add pc, pc, r0, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -229,9 +227,9 @@ vfp_get_double:
mov r0, #0
mov r1, #0
mov pc, lr
+ENDPROC(vfp_get_double)
- .globl vfp_put_double
-vfp_put_double:
+ENTRY(vfp_put_double)
add pc, pc, r2, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
@@ -245,3 +243,4 @@ vfp_put_double:
mov pc, lr
.endr
#endif
+ENDPROC(vfp_put_double)
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 51738bdd834..d4e7dca06e4 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -118,18 +118,21 @@ static int __init omap_rng_probe(struct platform_device *pdev)
mem = request_mem_region(res->start, res->end - res->start + 1,
pdev->name);
- if (mem == NULL)
- return -EBUSY;
+ if (mem == NULL) {
+ ret = -EBUSY;
+ goto err_region;
+ }
dev_set_drvdata(&pdev->dev, mem);
- rng_base = (u32 __force __iomem *)io_p2v(res->start);
+ rng_base = ioremap(res->start, res->end - res->start + 1);
+ if (!rng_base) {
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
ret = hwrng_register(&omap_rng_ops);
- if (ret) {
- release_resource(mem);
- rng_base = NULL;
- return ret;
- }
+ if (ret)
+ goto err_register;
dev_info(&pdev->dev, "OMAP Random Number Generator ver. %02x\n",
omap_rng_read_reg(RNG_REV_REG));
@@ -138,6 +141,18 @@ static int __init omap_rng_probe(struct platform_device *pdev)
rng_dev = pdev;
return 0;
+
+err_register:
+ iounmap(rng_base);
+ rng_base = NULL;
+err_ioremap:
+ release_resource(mem);
+err_region:
+ if (cpu_is_omap24xx()) {
+ clk_disable(rng_ick);
+ clk_put(rng_ick);
+ }
+ return ret;
}
static int __exit omap_rng_remove(struct platform_device *pdev)
@@ -148,6 +163,8 @@ static int __exit omap_rng_remove(struct platform_device *pdev)
omap_rng_write_reg(RNG_MASK_REG, 0x0);
+ iounmap(rng_base);
+
if (cpu_is_omap24xx()) {
clk_disable(rng_ick);
clk_put(rng_ick);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d402e8d813c..3309e862f31 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -540,6 +540,15 @@ config SENSORS_LM93
This driver can also be built as a module. If so, the module
will be called lm93.
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+ depends on SPI_MASTER
+ help
+ Say y here to support Maxim's MAX1111 ADC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1111.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 950134ab842..6babc801b34 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_SENSORS_LM87) += lm87.o
obj-$(CONFIG_SENSORS_LM90) += lm90.o
obj-$(CONFIG_SENSORS_LM92) += lm92.o
obj-$(CONFIG_SENSORS_LM93) += lm93.o
+obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
new file mode 100644
index 00000000000..bfaa665ccf3
--- /dev/null
+++ b/drivers/hwmon/max1111.c
@@ -0,0 +1,244 @@
+/*
+ * max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs
+ *
+ * Based on arch/arm/mach-pxa/corgi_ssp.c
+ *
+ * Copyright (C) 2004-2005 Richard Purdie
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/spi/spi.h>
+
+#define MAX1111_TX_BUF_SIZE 1
+#define MAX1111_RX_BUF_SIZE 2
+
+/* MAX1111 Commands */
+#define MAX1111_CTRL_PD0 (1u << 0)
+#define MAX1111_CTRL_PD1 (1u << 1)
+#define MAX1111_CTRL_SGL (1u << 2)
+#define MAX1111_CTRL_UNI (1u << 3)
+#define MAX1111_CTRL_SEL_SH (5) /* NOTE: bit 4 is ignored */
+#define MAX1111_CTRL_STR (1u << 7)
+
+struct max1111_data {
+ struct spi_device *spi;
+ struct device *hwmon_dev;
+ struct spi_message msg;
+ struct spi_transfer xfer[2];
+ uint8_t *tx_buf;
+ uint8_t *rx_buf;
+};
+
+static int max1111_read(struct device *dev, int channel)
+{
+ struct max1111_data *data = dev_get_drvdata(dev);
+ uint8_t v1, v2;
+ int err;
+
+ data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) |
+ MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
+ MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
+
+ err = spi_sync(data->spi, &data->msg);
+ if (err < 0) {
+ dev_err(dev, "spi_sync failed with %d\n", err);
+ return err;
+ }
+
+ v1 = data->rx_buf[0];
+ v2 = data->rx_buf[1];
+
+ if ((v1 & 0xc0) || (v2 & 0x3f))
+ return -EINVAL;
+
+ return (v1 << 2) | (v2 >> 6);
+}
+
+#ifdef CONFIG_SHARPSL_PM
+static struct max1111_data *the_max1111;
+
+int max1111_read_channel(int channel)
+{
+ return max1111_read(&the_max1111->spi->dev, channel);
+}
+EXPORT_SYMBOL(max1111_read_channel);
+#endif
+
+/*
+ * NOTE: SPI devices do not have a default 'name' attribute, which is
+ * likely to be used by hwmon applications to distinguish between
+ * different devices, explicitly add a name attribute here.
+ */
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "max1111\n");
+}
+
+static ssize_t show_adc(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = max1111_read(dev, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+#define MAX1111_ADC_ATTR(_id) \
+ SENSOR_DEVICE_ATTR(adc##_id##_in, S_IRUGO, show_adc, NULL, _id)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static MAX1111_ADC_ATTR(0);
+static MAX1111_ADC_ATTR(1);
+static MAX1111_ADC_ATTR(2);
+static MAX1111_ADC_ATTR(3);
+
+static struct attribute *max1111_attributes[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_adc0_in.dev_attr.attr,
+ &sensor_dev_attr_adc1_in.dev_attr.attr,
+ &sensor_dev_attr_adc2_in.dev_attr.attr,
+ &sensor_dev_attr_adc3_in.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group max1111_attr_group = {
+ .attrs = max1111_attributes,
+};
+
+static int setup_transfer(struct max1111_data *data)
+{
+ struct spi_message *m;
+ struct spi_transfer *x;
+
+ data->tx_buf = kmalloc(MAX1111_TX_BUF_SIZE, GFP_KERNEL);
+ if (!data->tx_buf)
+ return -ENOMEM;
+
+ data->rx_buf = kmalloc(MAX1111_RX_BUF_SIZE, GFP_KERNEL);
+ if (!data->rx_buf) {
+ kfree(data->tx_buf);
+ return -ENOMEM;
+ }
+
+ m = &data->msg;
+ x = &data->xfer[0];
+
+ spi_message_init(m);
+
+ x->tx_buf = &data->tx_buf[0];
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+ x->rx_buf = &data->rx_buf[0];
+ x->len = 2;
+ spi_message_add_tail(x, m);
+
+ return 0;
+}
+
+static int __devinit max1111_probe(struct spi_device *spi)
+{
+ struct max1111_data *data;
+ int err;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ err = spi_setup(spi);
+ if (err < 0)
+ return err;
+
+ data = kzalloc(sizeof(struct max1111_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&spi->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ err = setup_transfer(data);
+ if (err)
+ goto err_free_data;
+
+ data->spi = spi;
+ spi_set_drvdata(spi, data);
+
+ err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
+ if (err) {
+ dev_err(&spi->dev, "failed to create attribute group\n");
+ goto err_free_all;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&spi->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&spi->dev, "failed to create hwmon device\n");
+ err = PTR_ERR(data->hwmon_dev);
+ goto err_remove;
+ }
+
+#ifdef CONFIG_SHARPSL_PM
+ the_max1111 = data;
+#endif
+ return 0;
+
+err_remove:
+ sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+err_free_all:
+ kfree(data->rx_buf);
+ kfree(data->tx_buf);
+err_free_data:
+ kfree(data);
+ return err;
+}
+
+static int __devexit max1111_remove(struct spi_device *spi)
+{
+ struct max1111_data *data = spi_get_drvdata(spi);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+ kfree(data->rx_buf);
+ kfree(data->tx_buf);
+ kfree(data);
+ return 0;
+}
+
+static struct spi_driver max1111_driver = {
+ .driver = {
+ .name = "max1111",
+ .owner = THIS_MODULE,
+ },
+ .probe = max1111_probe,
+ .remove = __devexit_p(max1111_remove),
+};
+
+static int __init max1111_init(void)
+{
+ return spi_register_driver(&max1111_driver);
+}
+module_init(max1111_init);
+
+static void __exit max1111_exit(void)
+{
+ spi_unregister_driver(&max1111_driver);
+}
+module_exit(max1111_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("MAX1111 ADC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e7eb7bf9dde..608038d64f8 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -589,11 +589,16 @@ omap_i2c_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->irq = irq->start;
- dev->base = (void __iomem *) IO_ADDRESS(mem->start);
+ dev->base = ioremap(mem->start, mem->end - mem->start + 1);
+ if (!dev->base) {
+ r = -ENOMEM;
+ goto err_free_mem;
+ }
+
platform_set_drvdata(pdev, dev);
if ((r = omap_i2c_get_clocks(dev)) != 0)
- goto err_free_mem;
+ goto err_iounmap;
omap_i2c_unidle(dev);
@@ -640,6 +645,8 @@ err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_idle(dev);
omap_i2c_put_clocks(dev);
+err_iounmap:
+ iounmap(dev->base);
err_free_mem:
platform_set_drvdata(pdev, NULL);
kfree(dev);
@@ -661,6 +668,7 @@ omap_i2c_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_put_clocks(dev);
+ iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, (mem->end - mem->start) + 1);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 44d838410f1..906f9b9d715 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -38,7 +38,44 @@
#include <asm/irq.h>
#include <asm/io.h>
#include <mach/i2c.h>
-#include <mach/pxa-regs.h>
+
+/*
+ * I2C registers and bit definitions
+ */
+#define IBMR (0x00)
+#define IDBR (0x08)
+#define ICR (0x10)
+#define ISR (0x18)
+#define ISAR (0x20)
+
+#define ICR_START (1 << 0) /* start bit */
+#define ICR_STOP (1 << 1) /* stop bit */
+#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
+#define ICR_TB (1 << 3) /* transfer byte bit */
+#define ICR_MA (1 << 4) /* master abort */
+#define ICR_SCLE (1 << 5) /* master clock enable */
+#define ICR_IUE (1 << 6) /* unit enable */
+#define ICR_GCD (1 << 7) /* general call disable */
+#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
+#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
+#define ICR_BEIE (1 << 10) /* enable bus error ints */
+#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
+#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
+#define ICR_SADIE (1 << 13) /* slave address detected int enable */
+#define ICR_UR (1 << 14) /* unit reset */
+#define ICR_FM (1 << 15) /* fast mode */
+
+#define ISR_RWM (1 << 0) /* read/write mode */
+#define ISR_ACKNAK (1 << 1) /* ack/nak status */
+#define ISR_UB (1 << 2) /* unit busy */
+#define ISR_IBB (1 << 3) /* bus busy */
+#define ISR_SSD (1 << 4) /* slave stop detected */
+#define ISR_ALD (1 << 5) /* arbitration loss detected */
+#define ISR_ITE (1 << 6) /* tx buffer empty */
+#define ISR_IRF (1 << 7) /* rx buffer full */
+#define ISR_GCAD (1 << 8) /* general call address detected */
+#define ISR_SAD (1 << 9) /* slave address detected */
+#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
struct pxa_i2c {
spinlock_t lock;
@@ -60,19 +97,21 @@ struct pxa_i2c {
u32 icrlog[32];
void __iomem *reg_base;
+ unsigned int reg_shift;
unsigned long iobase;
unsigned long iosize;
int irq;
- int use_pio;
+ unsigned int use_pio :1;
+ unsigned int fast_mode :1;
};
-#define _IBMR(i2c) ((i2c)->reg_base + 0)
-#define _IDBR(i2c) ((i2c)->reg_base + 8)
-#define _ICR(i2c) ((i2c)->reg_base + 0x10)
-#define _ISR(i2c) ((i2c)->reg_base + 0x18)
-#define _ISAR(i2c) ((i2c)->reg_base + 0x20)
+#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
+#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift))
+#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift))
+#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift))
+#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift))
/*
* I2C Slave mode address
@@ -188,14 +227,14 @@ static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
static void i2c_pxa_abort(struct pxa_i2c *i2c)
{
- unsigned long timeout = jiffies + HZ/4;
+ int i = 250;
if (i2c_pxa_is_slavemode(i2c)) {
dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
return;
}
- while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+ while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
unsigned long icr = readl(_ICR(i2c));
icr &= ~ICR_START;
@@ -205,7 +244,8 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
show_state(i2c);
- msleep(1);
+ mdelay(1);
+ i --;
}
writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
@@ -364,7 +404,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
- writel(I2C_ICR_INIT, _ICR(i2c));
+ writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -907,12 +947,6 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
struct pxa_i2c *i2c = adap->algo_data;
int ret, i;
- /* If the I2C controller is disabled we need to reset it (probably due
- to a suspend/resume destroying state). We do this here as we can then
- avoid worrying about resuming the controller before its users. */
- if (!(readl(_ICR(i2c)) & ICR_IUE))
- i2c_pxa_reset(i2c);
-
for (i = adap->retries; i >= 0; i--) {
ret = i2c_pxa_do_xfer(i2c, msgs, num);
if (ret != I2C_RETRY)
@@ -993,6 +1027,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = -EIO;
goto eremap;
}
+ i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
i2c->iobase = res->start;
i2c->iosize = res_len(res);
@@ -1013,6 +1048,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
if (plat) {
i2c->adap.class = plat->class;
i2c->use_pio = plat->use_pio;
+ i2c->fast_mode = plat->fast_mode;
}
if (i2c->use_pio) {
@@ -1082,9 +1118,33 @@ static int __exit i2c_pxa_remove(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_PM
+static int i2c_pxa_suspend_late(struct platform_device *dev, pm_message_t state)
+{
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
+ clk_disable(i2c->clk);
+ return 0;
+}
+
+static int i2c_pxa_resume_early(struct platform_device *dev)
+{
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
+
+ clk_enable(i2c->clk);
+ i2c_pxa_reset(i2c);
+
+ return 0;
+}
+#else
+#define i2c_pxa_suspend_late NULL
+#define i2c_pxa_resume_early NULL
+#endif
+
static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
.remove = __exit_p(i2c_pxa_remove),
+ .suspend_late = i2c_pxa_suspend_late,
+ .resume_early = i2c_pxa_resume_early,
.driver = {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 134e67bf6a9..c8ed065ea0c 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -80,9 +80,9 @@ struct corgikbd {
#define KB_ACTIVATE_DELAY 10
/* Helper functions for reading the keyboard matrix
- * Note: We should really be using pxa_gpio_mode to alter GPDR but it
- * requires a function call per GPIO bit which is excessive
- * when we need to access 12 bits at once multiple times.
+ * Note: We should really be using the generic gpio functions to alter
+ * GPDR but it requires a function call per GPIO bit which is
+ * excessive when we need to access 12 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index dcea87a0bc5..039787f81ed 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -62,7 +62,7 @@ struct omap_kp {
unsigned int debounce;
};
-DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
+static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
static int *keymap;
static unsigned int *row_gpios;
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index de67b8e0a79..c48b76a46a5 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -101,9 +101,9 @@ struct spitzkbd {
#define KB_ACTIVATE_DELAY 10
/* Helper functions for reading the keyboard matrix
- * Note: We should really be using pxa_gpio_mode to alter GPDR but it
- * requires a function call per GPIO bit which is excessive
- * when we need to access 11 bits at once, multiple times.
+ * Note: We should really be using the generic gpio functions to alter
+ * GPDR but it requires a function call per GPIO bit which is
+ * excessive when we need to access 11 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index 44cb50af3ce..677276b1202 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -59,9 +59,9 @@ struct tosakbd {
/* Helper functions for reading the keyboard matrix
- * Note: We should really be using pxa_gpio_mode to alter GPDR but it
- * requires a function call per GPIO bit which is excessive
- * when we need to access 12 bits at once, multiple times.
+ * Note: We should really be using the generic gpio functions to alter
+ * GPDR but it requires a function call per GPIO bit which is
+ * excessive when we need to access 12 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 25287e80e23..6e1e8c624f9 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -220,6 +220,7 @@ config TOUCHSCREEN_ATMEL_TSADCC
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
select AC97_BUS
+ depends on UCB1400_CORE
help
This enables support for the Philips UCB1400 touchscreen interface.
The UCB1400 is an AC97 audio codec. The touchscreen interface
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index ce6f48c695f..8583c766d56 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/irq.h>
@@ -116,6 +117,7 @@ struct ads7846 {
void *filter_data;
void (*filter_cleanup)(void *data);
int (*get_pendown_state)(void);
+ int gpio_pendown;
};
/* leave chip selected when we're done, for quicker re-select? */
@@ -491,6 +493,14 @@ static struct attribute_group ads784x_attr_group = {
/*--------------------------------------------------------------------------*/
+static int get_pendown_state(struct ads7846 *ts)
+{
+ if (ts->get_pendown_state)
+ return ts->get_pendown_state();
+
+ return !gpio_get_value(ts->gpio_pendown);
+}
+
/*
* PENIRQ only kicks the timer. The timer only reissues the SPI transfer,
* to retrieve touchscreen status.
@@ -550,7 +560,7 @@ static void ads7846_rx(void *ads)
*/
if (ts->penirq_recheck_delay_usecs) {
udelay(ts->penirq_recheck_delay_usecs);
- if (!ts->get_pendown_state())
+ if (!get_pendown_state(ts))
Rt = 0;
}
@@ -677,7 +687,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
spin_lock_irq(&ts->lock);
- if (unlikely(!ts->get_pendown_state() ||
+ if (unlikely(!get_pendown_state(ts) ||
device_suspended(&ts->spi->dev))) {
if (ts->pendown) {
struct input_dev *input = ts->input;
@@ -716,7 +726,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
unsigned long flags;
spin_lock_irqsave(&ts->lock, flags);
- if (likely(ts->get_pendown_state())) {
+ if (likely(get_pendown_state(ts))) {
if (!ts->irq_disabled) {
/* The ARM do_simple_IRQ() dispatcher doesn't act
* like the other dispatchers: it will report IRQs
@@ -806,6 +816,36 @@ static int ads7846_resume(struct spi_device *spi)
return 0;
}
+static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+{
+ struct ads7846_platform_data *pdata = spi->dev.platform_data;
+ int err;
+
+ /* REVISIT when the irq can be triggered active-low, or if for some
+ * reason the touchscreen isn't hooked up, we don't need to access
+ * the pendown state.
+ */
+ if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
+ dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+ return -EINVAL;
+ }
+
+ if (pdata->get_pendown_state) {
+ ts->get_pendown_state = pdata->get_pendown_state;
+ return 0;
+ }
+
+ err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+ if (err) {
+ dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+ pdata->gpio_pendown);
+ return err;
+ }
+
+ ts->gpio_pendown = pdata->gpio_pendown;
+ return 0;
+}
+
static int __devinit ads7846_probe(struct spi_device *spi)
{
struct ads7846 *ts;
@@ -833,15 +873,6 @@ static int __devinit ads7846_probe(struct spi_device *spi)
return -EINVAL;
}
- /* REVISIT when the irq can be triggered active-low, or if for some
- * reason the touchscreen isn't hooked up, we don't need to access
- * the pendown state.
- */
- if (pdata->get_pendown_state == NULL) {
- dev_dbg(&spi->dev, "no get_pendown_state function?\n");
- return -EINVAL;
- }
-
/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
* that even if the hardware can do that, the SPI controller driver
* may not. So we stick to very-portable 8 bit words, both RX and TX.
@@ -893,7 +924,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ts->filter_data = ts;
} else
ts->filter = ads7846_no_filter;
- ts->get_pendown_state = pdata->get_pendown_state;
+
+ err = setup_pendown(spi, ts);
+ if (err)
+ goto err_cleanup_filter;
if (pdata->penirq_recheck_delay_usecs)
ts->penirq_recheck_delay_usecs =
@@ -1085,7 +1119,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi->dev.driver->name, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
err = -EBUSY;
- goto err_cleanup_filter;
+ goto err_free_gpio;
}
err = ads784x_hwmon_register(spi, ts);
@@ -1116,6 +1150,9 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ads784x_hwmon_unregister(spi, ts);
err_free_irq:
free_irq(spi->irq, ts);
+ err_free_gpio:
+ if (ts->gpio_pendown != -1)
+ gpio_free(ts->gpio_pendown);
err_cleanup_filter:
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
@@ -1140,6 +1177,9 @@ static int __devexit ads7846_remove(struct spi_device *spi)
/* suspend left the IRQ disabled */
enable_irq(ts->spi->irq);
+ if (ts->gpio_pendown != -1)
+ gpio_free(ts->gpio_pendown);
+
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index bce018e45bc..54986627def 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -5,6 +5,10 @@
* Created: September 25, 2006
* Copyright: MontaVista Software, Inc.
*
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -25,124 +29,16 @@
#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
-
-#include <sound/core.h>
-#include <sound/ac97_codec.h>
-
-
-/*
- * Interesting UCB1400 AC-link registers
- */
-
-#define UCB_IE_RIS 0x5e
-#define UCB_IE_FAL 0x60
-#define UCB_IE_STATUS 0x62
-#define UCB_IE_CLEAR 0x62
-#define UCB_IE_ADC (1 << 11)
-#define UCB_IE_TSPX (1 << 12)
-
-#define UCB_TS_CR 0x64
-#define UCB_TS_CR_TSMX_POW (1 << 0)
-#define UCB_TS_CR_TSPX_POW (1 << 1)
-#define UCB_TS_CR_TSMY_POW (1 << 2)
-#define UCB_TS_CR_TSPY_POW (1 << 3)
-#define UCB_TS_CR_TSMX_GND (1 << 4)
-#define UCB_TS_CR_TSPX_GND (1 << 5)
-#define UCB_TS_CR_TSMY_GND (1 << 6)
-#define UCB_TS_CR_TSPY_GND (1 << 7)
-#define UCB_TS_CR_MODE_INT (0 << 8)
-#define UCB_TS_CR_MODE_PRES (1 << 8)
-#define UCB_TS_CR_MODE_POS (2 << 8)
-#define UCB_TS_CR_BIAS_ENA (1 << 11)
-#define UCB_TS_CR_TSPX_LOW (1 << 12)
-#define UCB_TS_CR_TSMX_LOW (1 << 13)
-
-#define UCB_ADC_CR 0x66
-#define UCB_ADC_SYNC_ENA (1 << 0)
-#define UCB_ADC_VREFBYP_CON (1 << 1)
-#define UCB_ADC_INP_TSPX (0 << 2)
-#define UCB_ADC_INP_TSMX (1 << 2)
-#define UCB_ADC_INP_TSPY (2 << 2)
-#define UCB_ADC_INP_TSMY (3 << 2)
-#define UCB_ADC_INP_AD0 (4 << 2)
-#define UCB_ADC_INP_AD1 (5 << 2)
-#define UCB_ADC_INP_AD2 (6 << 2)
-#define UCB_ADC_INP_AD3 (7 << 2)
-#define UCB_ADC_EXT_REF (1 << 5)
-#define UCB_ADC_START (1 << 7)
-#define UCB_ADC_ENA (1 << 15)
-
-#define UCB_ADC_DATA 0x68
-#define UCB_ADC_DAT_VALID (1 << 15)
-#define UCB_ADC_DAT_VALUE(x) ((x) & 0x3ff)
-
-#define UCB_ID 0x7e
-#define UCB_ID_1400 0x4304
-
-
-struct ucb1400 {
- struct snd_ac97 *ac97;
- struct input_dev *ts_idev;
-
- int irq;
-
- wait_queue_head_t ts_wait;
- struct task_struct *ts_task;
-
- unsigned int irq_pending; /* not bit field shared */
- unsigned int ts_restart:1;
- unsigned int adcsync:1;
-};
+#include <linux/ucb1400.h>
static int adcsync;
static int ts_delay = 55; /* us */
static int ts_delay_pressure; /* us */
-static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
-{
- return ucb->ac97->bus->ops->read(ucb->ac97, reg);
-}
-
-static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
-{
- ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
-}
-
-static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
-{
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-}
-
-static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
-{
- unsigned int val;
-
- if (ucb->adcsync)
- adc_channel |= UCB_ADC_SYNC_ENA;
-
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
-
- for (;;) {
- val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
- if (val & UCB_ADC_DAT_VALID)
- break;
- /* yield to other processes */
- schedule_timeout_uninterruptible(1);
- }
-
- return UCB_ADC_DAT_VALUE(val);
-}
-
-static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
-{
- ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
-}
-
/* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
+static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_INT);
@@ -152,14 +48,14 @@ static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
* Switch to pressure mode, and read pressure. We don't need to wait
* here, since both plates are being driven.
*/
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
udelay(ts_delay_pressure);
- return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+ return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
}
/*
@@ -168,21 +64,21 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(ts_delay);
- return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+ return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
}
/*
@@ -191,63 +87,63 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(ts_delay);
- return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
+ return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
}
/*
* Switch to X plate resistance mode. Set MX to ground, PX to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- return ucb1400_adc_read(ucb, 0);
+ return ucb1400_adc_read(ucb->ac97, 0, adcsync);
}
/*
* Switch to Y plate resistance mode. Set MY to ground, PY to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- return ucb1400_adc_read(ucb, 0);
+ return ucb1400_adc_read(ucb->ac97, 0, adcsync);
}
-static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
+static inline int ucb1400_ts_pen_down(struct snd_ac97 *ac97)
{
- unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
- return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+ unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
+ return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
}
-static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
{
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
- ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
+ ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+ ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
}
-static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
{
- ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+ ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
}
static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
@@ -264,25 +160,24 @@ static void ucb1400_ts_event_release(struct input_dev *idev)
input_sync(idev);
}
-static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
+static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
{
unsigned int isr;
- isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
- if (isr & UCB_IE_TSPX)
- ucb1400_ts_irq_disable(ucb);
- else
+ if (isr & UCB_IE_TSPX) {
+ ucb1400_ts_irq_disable(ucb->ac97);
+ enable_irq(ucb->irq);
+ } else
printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
-
- enable_irq(ucb->irq);
}
static int ucb1400_ts_thread(void *_ucb)
{
- struct ucb1400 *ucb = _ucb;
+ struct ucb1400_ts *ucb = _ucb;
struct task_struct *tsk = current;
int valid = 0;
struct sched_param param = { .sched_priority = 1 };
@@ -301,19 +196,19 @@ static int ucb1400_ts_thread(void *_ucb)
ucb1400_handle_pending_irq(ucb);
}
- ucb1400_adc_enable(ucb);
+ ucb1400_adc_enable(ucb->ac97);
x = ucb1400_ts_read_xpos(ucb);
y = ucb1400_ts_read_ypos(ucb);
p = ucb1400_ts_read_pressure(ucb);
- ucb1400_adc_disable(ucb);
+ ucb1400_adc_disable(ucb->ac97);
/* Switch back to interrupt mode. */
- ucb1400_ts_mode_int(ucb);
+ ucb1400_ts_mode_int(ucb->ac97);
msleep(10);
- if (ucb1400_ts_pen_down(ucb)) {
- ucb1400_ts_irq_enable(ucb);
+ if (ucb1400_ts_pen_down(ucb->ac97)) {
+ ucb1400_ts_irq_enable(ucb->ac97);
/*
* If we spat out a valid sample set last time,
@@ -332,8 +227,8 @@ static int ucb1400_ts_thread(void *_ucb)
}
wait_event_freezable_timeout(ucb->ts_wait,
- ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
- timeout);
+ ucb->irq_pending || ucb->ts_restart ||
+ kthread_should_stop(), timeout);
}
/* Send the "pen off" if we are stopping with the pen still active */
@@ -356,7 +251,7 @@ static int ucb1400_ts_thread(void *_ucb)
*/
static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
{
- struct ucb1400 *ucb = devid;
+ struct ucb1400_ts *ucb = devid;
if (irqnr == ucb->irq) {
disable_irq(ucb->irq);
@@ -369,7 +264,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
static int ucb1400_ts_open(struct input_dev *idev)
{
- struct ucb1400 *ucb = input_get_drvdata(idev);
+ struct ucb1400_ts *ucb = input_get_drvdata(idev);
int ret = 0;
BUG_ON(ucb->ts_task);
@@ -385,34 +280,14 @@ static int ucb1400_ts_open(struct input_dev *idev)
static void ucb1400_ts_close(struct input_dev *idev)
{
- struct ucb1400 *ucb = input_get_drvdata(idev);
+ struct ucb1400_ts *ucb = input_get_drvdata(idev);
if (ucb->ts_task)
kthread_stop(ucb->ts_task);
- ucb1400_ts_irq_disable(ucb);
- ucb1400_reg_write(ucb, UCB_TS_CR, 0);
-}
-
-#ifdef CONFIG_PM
-static int ucb1400_ts_resume(struct device *dev)
-{
- struct ucb1400 *ucb = dev_get_drvdata(dev);
-
- if (ucb->ts_task) {
- /*
- * Restart the TS thread to ensure the
- * TS interrupt mode is set up again
- * after sleep.
- */
- ucb->ts_restart = 1;
- wake_up(&ucb->ts_wait);
- }
- return 0;
+ ucb1400_ts_irq_disable(ucb->ac97);
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
}
-#else
-#define ucb1400_ts_resume NULL
-#endif
#ifndef NO_IRQ
#define NO_IRQ 0
@@ -422,25 +297,26 @@ static int ucb1400_ts_resume(struct device *dev)
* Try to probe our interrupt, rather than relying on lots of
* hard-coded machine dependencies.
*/
-static int ucb1400_detect_irq(struct ucb1400 *ucb)
+static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
{
unsigned long mask, timeout;
mask = probe_irq_on();
/* Enable the ADC interrupt. */
- ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
- ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
/* Cause an ADC interrupt. */
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+ ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
+ ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
/* Wait for the conversion to complete. */
timeout = jiffies + HZ/2;
- while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
+ while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
+ UCB_ADC_DAT_VALID)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
@@ -448,13 +324,13 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
return -ENODEV;
}
}
- ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
/* Disable and clear interrupt. */
- ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
- ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
/* Read triggered interrupt. */
ucb->irq = probe_irq_off(mask);
@@ -464,36 +340,25 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
return 0;
}
-static int ucb1400_ts_probe(struct device *dev)
+static int ucb1400_ts_probe(struct platform_device *dev)
{
- struct ucb1400 *ucb;
- struct input_dev *idev;
- int error, id, x_res, y_res;
+ int error, x_res, y_res;
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
- ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
- idev = input_allocate_device();
- if (!ucb || !idev) {
+ ucb->ts_idev = input_allocate_device();
+ if (!ucb->ts_idev) {
error = -ENOMEM;
- goto err_free_devs;
+ goto err;
}
- ucb->ts_idev = idev;
- ucb->adcsync = adcsync;
- ucb->ac97 = to_ac97_t(dev);
- init_waitqueue_head(&ucb->ts_wait);
-
- id = ucb1400_reg_read(ucb, UCB_ID);
- if (id != UCB_ID_1400) {
- error = -ENODEV;
- goto err_free_devs;
- }
-
- error = ucb1400_detect_irq(ucb);
+ error = ucb1400_ts_detect_irq(ucb);
if (error) {
printk(KERN_ERR "UCB1400: IRQ probe failed\n");
goto err_free_devs;
}
+ init_waitqueue_head(&ucb->ts_wait);
+
error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
"UCB1400", ucb);
if (error) {
@@ -503,80 +368,101 @@ static int ucb1400_ts_probe(struct device *dev)
}
printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
- input_set_drvdata(idev, ucb);
+ input_set_drvdata(ucb->ts_idev, ucb);
- idev->dev.parent = dev;
- idev->name = "UCB1400 touchscreen interface";
- idev->id.vendor = ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
- idev->id.product = id;
- idev->open = ucb1400_ts_open;
- idev->close = ucb1400_ts_close;
- idev->evbit[0] = BIT_MASK(EV_ABS);
+ ucb->ts_idev->dev.parent = &dev->dev;
+ ucb->ts_idev->name = "UCB1400 touchscreen interface";
+ ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
+ AC97_VENDOR_ID1);
+ ucb->ts_idev->id.product = ucb->id;
+ ucb->ts_idev->open = ucb1400_ts_open;
+ ucb->ts_idev->close = ucb1400_ts_close;
+ ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS);
- ucb1400_adc_enable(ucb);
+ ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
- ucb1400_adc_disable(ucb);
+ ucb1400_adc_disable(ucb->ac97);
printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
- input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
- input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
- input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
+ input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
+ input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
+ input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
- error = input_register_device(idev);
+ error = input_register_device(ucb->ts_idev);
if (error)
goto err_free_irq;
- dev_set_drvdata(dev, ucb);
return 0;
- err_free_irq:
+err_free_irq:
free_irq(ucb->irq, ucb);
- err_free_devs:
- input_free_device(idev);
- kfree(ucb);
+err_free_devs:
+ input_free_device(ucb->ts_idev);
+err:
return error;
+
}
-static int ucb1400_ts_remove(struct device *dev)
+static int ucb1400_ts_remove(struct platform_device *dev)
{
- struct ucb1400 *ucb = dev_get_drvdata(dev);
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
free_irq(ucb->irq, ucb);
input_unregister_device(ucb->ts_idev);
- dev_set_drvdata(dev, NULL);
- kfree(ucb);
return 0;
}
-static struct device_driver ucb1400_ts_driver = {
- .name = "ucb1400_ts",
- .owner = THIS_MODULE,
- .bus = &ac97_bus_type,
- .probe = ucb1400_ts_probe,
- .remove = ucb1400_ts_remove,
- .resume = ucb1400_ts_resume,
+#ifdef CONFIG_PM
+static int ucb1400_ts_resume(struct platform_device *dev)
+{
+ struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+
+ if (ucb->ts_task) {
+ /*
+ * Restart the TS thread to ensure the
+ * TS interrupt mode is set up again
+ * after sleep.
+ */
+ ucb->ts_restart = 1;
+ wake_up(&ucb->ts_wait);
+ }
+ return 0;
+}
+#else
+#define ucb1400_ts_resume NULL
+#endif
+
+static struct platform_driver ucb1400_ts_driver = {
+ .probe = ucb1400_ts_probe,
+ .remove = ucb1400_ts_remove,
+ .resume = ucb1400_ts_resume,
+ .driver = {
+ .name = "ucb1400_ts",
+ },
};
static int __init ucb1400_ts_init(void)
{
- return driver_register(&ucb1400_ts_driver);
+ return platform_driver_register(&ucb1400_ts_driver);
}
static void __exit ucb1400_ts_exit(void)
{
- driver_unregister(&ucb1400_ts_driver);
+ platform_driver_unregister(&ucb1400_ts_driver);
}
module_param(adcsync, bool, 0444);
MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
module_param(ts_delay, int, 0444);
-MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us.");
+MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
+ " position read. Default = 55us.");
module_param(ts_delay_pressure, int, 0444);
MODULE_PARM_DESC(ts_delay_pressure,
- "delay between panel setup and pressure read. Default = 0us.");
+ "delay between panel setup and pressure read."
+ " Default = 0us.");
module_init(ucb1400_ts_init);
module_exit(ucb1400_ts_exit);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9556262dda5..5b14262af01 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -24,13 +24,6 @@ config LEDS_ATMEL_PWM
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
-config LEDS_CORGI
- tristate "LED Support for the Sharp SL-C7x0 series"
- depends on LEDS_CLASS && PXA_SHARP_C7xx
- help
- This option enables support for the LEDs on Sharp Zaurus
- SL-C7x0 series (C700, C750, C760, C860).
-
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
depends on LEDS_CLASS && SHARP_LOCOMO
@@ -38,13 +31,6 @@ config LEDS_LOCOMO
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
-config LEDS_SPITZ
- tristate "LED Support for the Sharp SL-Cxx00 series"
- depends on LEDS_CLASS && PXA_SHARP_Cxx00
- help
- This option enables support for the LEDs on Sharp Zaurus
- SL-Cxx00 series (C1000, C3000, C3100).
-
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index ff7982b4456..3a8e6a04363 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -6,9 +6,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
-obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
-obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
deleted file mode 100644
index bc2dcd89f63..00000000000
--- a/drivers/leds/leds-corgi.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * LED Triggers Core
- *
- * Copyright 2005-2006 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/hardware/scoop.h>
-
-static void corgiled_amber_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
- else
- GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
-}
-
-static void corgiled_green_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
-}
-
-static struct led_classdev corgi_amber_led = {
- .name = "corgi:amber:charge",
- .default_trigger = "sharpsl-charge",
- .brightness_set = corgiled_amber_set,
-};
-
-static struct led_classdev corgi_green_led = {
- .name = "corgi:green:mail",
- .default_trigger = "nand-disk",
- .brightness_set = corgiled_green_set,
-};
-
-#ifdef CONFIG_PM
-static int corgiled_suspend(struct platform_device *dev, pm_message_t state)
-{
-#ifdef CONFIG_LEDS_TRIGGERS
- if (corgi_amber_led.trigger &&
- strcmp(corgi_amber_led.trigger->name, "sharpsl-charge"))
-#endif
- led_classdev_suspend(&corgi_amber_led);
- led_classdev_suspend(&corgi_green_led);
- return 0;
-}
-
-static int corgiled_resume(struct platform_device *dev)
-{
- led_classdev_resume(&corgi_amber_led);
- led_classdev_resume(&corgi_green_led);
- return 0;
-}
-#endif
-
-static int corgiled_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &corgi_amber_led);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &corgi_green_led);
- if (ret < 0)
- led_classdev_unregister(&corgi_amber_led);
-
- return ret;
-}
-
-static int corgiled_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&corgi_amber_led);
- led_classdev_unregister(&corgi_green_led);
- return 0;
-}
-
-static struct platform_driver corgiled_driver = {
- .probe = corgiled_probe,
- .remove = corgiled_remove,
-#ifdef CONFIG_PM
- .suspend = corgiled_suspend,
- .resume = corgiled_resume,
-#endif
- .driver = {
- .name = "corgi-led",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init corgiled_init(void)
-{
- return platform_driver_register(&corgiled_driver);
-}
-
-static void __exit corgiled_exit(void)
-{
- platform_driver_unregister(&corgiled_driver);
-}
-
-module_init(corgiled_init);
-module_exit(corgiled_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Corgi LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:corgi-led");
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
deleted file mode 100644
index 178831c64bf..00000000000
--- a/drivers/leds/leds-spitz.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * LED Triggers Core
- *
- * Copyright 2005-2006 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/spitz.h>
-
-static void spitzled_amber_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
-}
-
-static void spitzled_green_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
-}
-
-static struct led_classdev spitz_amber_led = {
- .name = "spitz:amber:charge",
- .default_trigger = "sharpsl-charge",
- .brightness_set = spitzled_amber_set,
-};
-
-static struct led_classdev spitz_green_led = {
- .name = "spitz:green:hddactivity",
- .default_trigger = "ide-disk",
- .brightness_set = spitzled_green_set,
-};
-
-#ifdef CONFIG_PM
-static int spitzled_suspend(struct platform_device *dev, pm_message_t state)
-{
-#ifdef CONFIG_LEDS_TRIGGERS
- if (spitz_amber_led.trigger &&
- strcmp(spitz_amber_led.trigger->name, "sharpsl-charge"))
-#endif
- led_classdev_suspend(&spitz_amber_led);
- led_classdev_suspend(&spitz_green_led);
- return 0;
-}
-
-static int spitzled_resume(struct platform_device *dev)
-{
- led_classdev_resume(&spitz_amber_led);
- led_classdev_resume(&spitz_green_led);
- return 0;
-}
-#endif
-
-static int spitzled_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (machine_is_akita()) {
- spitz_green_led.name = "spitz:green:mail";
- spitz_green_led.default_trigger = "nand-disk";
- }
-
- ret = led_classdev_register(&pdev->dev, &spitz_amber_led);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &spitz_green_led);
- if (ret < 0)
- led_classdev_unregister(&spitz_amber_led);
-
- return ret;
-}
-
-static int spitzled_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&spitz_amber_led);
- led_classdev_unregister(&spitz_green_led);
-
- return 0;
-}
-
-static struct platform_driver spitzled_driver = {
- .probe = spitzled_probe,
- .remove = spitzled_remove,
-#ifdef CONFIG_PM
- .suspend = spitzled_suspend,
- .resume = spitzled_resume,
-#endif
- .driver = {
- .name = "spitz-led",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init spitzled_init(void)
-{
- return platform_driver_register(&spitzled_driver);
-}
-
-static void __exit spitzled_exit(void)
-{
- platform_driver_unregister(&spitzled_driver);
-}
-
-module_init(spitzled_init);
-module_exit(spitzled_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Spitz LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:spitz-led");
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 388cf94055d..cf96b2cc4f1 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1025,9 +1025,9 @@ static int pxa_camera_resume(struct soc_camera_device *icd)
struct pxa_camera_dev *pcdev = ici->priv;
int i = 0, ret = 0;
- DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+ DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+ DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+ DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB;
CICR1 = pcdev->save_cicr[i++];
@@ -1171,9 +1171,9 @@ static int pxa_camera_probe(struct platform_device *pdev)
}
dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]);
- DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+ DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+ DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+ DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
/* request irq */
err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 68dc8d9eb24..0dae245c625 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -50,6 +50,15 @@ config HTC_PASIC3
HTC Magician devices, respectively. Actual functionality is
handled by the leds-pasic3 and ds1wm drivers.
+config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ help
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
+
config MFD_TMIO
bool
default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 03ad239ecef..6abebe36441 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
ifeq ($(CONFIG_SA1100_ASSABET),y)
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
+obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
new file mode 100644
index 00000000000..178159e264c
--- /dev/null
+++ b/drivers/mfd/ucb1400_core.c
@@ -0,0 +1,106 @@
+/*
+ * Core functions for:
+ * Philips UCB1400 multifunction chip
+ *
+ * Based on ucb1400_ts.c:
+ * Author: Nicolas Pitre
+ * Created: September 25, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#include <linux/module.h>
+#include <linux/ucb1400.h>
+
+static int ucb1400_core_probe(struct device *dev)
+{
+ int err;
+ struct ucb1400 *ucb;
+ struct ucb1400_ts ucb_ts;
+ struct snd_ac97 *ac97;
+
+ memset(&ucb_ts, 0, sizeof(ucb_ts));
+
+ ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
+ if (!ucb) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ dev_set_drvdata(dev, ucb);
+
+ ac97 = to_ac97_t(dev);
+
+ ucb_ts.id = ucb1400_reg_read(ac97, UCB_ID);
+ if (ucb_ts.id != UCB_ID_1400) {
+ err = -ENODEV;
+ goto err0;
+ }
+
+ /* TOUCHSCREEN */
+ ucb_ts.ac97 = ac97;
+ ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1);
+ if (!ucb->ucb1400_ts) {
+ err = -ENOMEM;
+ goto err0;
+ }
+ err = platform_device_add_data(ucb->ucb1400_ts, &ucb_ts,
+ sizeof(ucb_ts));
+ if (err)
+ goto err1;
+ err = platform_device_add(ucb->ucb1400_ts);
+ if (err)
+ goto err1;
+
+ return 0;
+
+err1:
+ platform_device_put(ucb->ucb1400_ts);
+err0:
+ kfree(ucb);
+err:
+ return err;
+}
+
+static int ucb1400_core_remove(struct device *dev)
+{
+ struct ucb1400 *ucb = dev_get_drvdata(dev);
+
+ platform_device_unregister(ucb->ucb1400_ts);
+ kfree(ucb);
+ return 0;
+}
+
+static struct device_driver ucb1400_core_driver = {
+ .name = "ucb1400_core",
+ .bus = &ac97_bus_type,
+ .probe = ucb1400_core_probe,
+ .remove = ucb1400_core_remove,
+};
+
+static int __init ucb1400_core_init(void)
+{
+ return driver_register(&ucb1400_core_driver);
+}
+
+static void __exit ucb1400_core_exit(void)
+{
+ driver_unregister(&ucb1400_core_driver);
+}
+
+module_init(ucb1400_core_init);
+module_exit(ucb1400_core_exit);
+
+MODULE_DESCRIPTION("Philips UCB1400 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index c16028872bb..1b9fc3c6b87 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -172,7 +172,7 @@ struct mmc_omap_host {
struct omap_mmc_platform_data *pdata;
};
-void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot)
+static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot)
{
unsigned long tick_ns;
@@ -182,7 +182,7 @@ void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot)
}
}
-void mmc_omap_fclk_enable(struct mmc_omap_host *host, unsigned int enable)
+static void mmc_omap_fclk_enable(struct mmc_omap_host *host, unsigned int enable)
{
unsigned long flags;
@@ -1455,7 +1455,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
host->irq = irq;
host->phys_base = host->mem_res->start;
- host->virt_base = (void __iomem *) IO_ADDRESS(host->phys_base);
+ host->virt_base = ioremap(res->start, res->end - res->start + 1);
+ if (!host->virt_base)
+ goto err_ioremap;
if (cpu_is_omap24xx()) {
host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1510,6 +1512,8 @@ err_free_iclk:
clk_put(host->iclk);
}
err_free_mmc_host:
+ iounmap(host->virt_base);
+err_ioremap:
kfree(host);
err_free_mem_region:
release_mem_region(res->start, res->end - res->start + 1);
@@ -1536,6 +1540,7 @@ static int mmc_omap_remove(struct platform_device *pdev)
if (host->fclk && !IS_ERR(host->fclk))
clk_put(host->fclk);
+ iounmap(host->virt_base);
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 55093ad132c..ebfaa996093 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -520,7 +520,7 @@ static int pxamci_probe(struct platform_device *pdev)
/*
* Block length register is only 10 bits before PXA27x.
*/
- mmc->max_blk_size = (cpu_is_pxa21x() || cpu_is_pxa25x()) ? 1023 : 2048;
+ mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
/*
* Block count register is 16 bits.
@@ -554,7 +554,7 @@ static int pxamci_probe(struct platform_device *pdev)
MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = 0;
host->cmdat = 0;
- if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
+ if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
if (cpu_is_pxa300() || cpu_is_pxa310())
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 1ee7f993db1..578c776e135 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -2,6 +2,9 @@
* Error Corrected Code Controller (ECC) - System peripherals regsters.
* Based on AT91SAM9260 datasheet revision B.
*
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 9eba3f04783..fa129c09bca 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -156,7 +156,7 @@ static int cmx270_init(void)
int mtd_parts_nb = 0;
int ret;
- if (!machine_is_armcore())
+ if (!(machine_is_armcore() && cpu_is_pxa27x()))
return -ENODEV;
ret = gpio_request(GPIO_NAND_CS, "NAND CS");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4a11296a951..9df7bb93edc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1386,7 +1386,8 @@ config FORCEDETH_NAPI
config CS89x0
tristate "CS89x0 support"
- depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
+ depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
+ || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1397,6 +1398,11 @@ config CS89x0
To compile this driver as a module, choose M here. The module
will be called cs89x0.
+config CS89x0_NONISA_IRQ
+ def_bool y
+ depends on CS89x0 != n
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
+
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on NET_PCI && PCI && MIPS
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index ea6144a9565..5890a917a62 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -194,6 +194,12 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
+#elif defined(CONFIG_MACH_MX31ADS)
+#include <mach/board-mx31ads.h>
+static unsigned int netcard_portlist[] __used __initdata = {
+ PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
+};
+static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
#else
static unsigned int netcard_portlist[] __used __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -802,7 +808,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
} else {
i = lp->isa_config & INT_NO_MASK;
if (lp->chip_type == CS8900) {
-#if defined(CONFIG_MACH_IXDP2351) || defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X)
+#ifdef CONFIG_CS89x0_NONISA_IRQ
i = cs8900_irq_map[0];
#else
/* Translate the IRQ using the IRQ mapping table. */
@@ -1029,6 +1035,7 @@ skip_this_frame:
void __init reset_chip(struct net_device *dev)
{
+#if !defined(CONFIG_MACH_MX31ADS)
#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -1057,6 +1064,7 @@ void __init reset_chip(struct net_device *dev)
reset_start_time = jiffies;
while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
;
+#endif /* !CONFIG_MACH_MX31ADS */
}
@@ -1304,7 +1312,7 @@ net_open(struct net_device *dev)
else
#endif
{
-#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
+#ifndef CONFIG_CS89x0_NONISA_IRQ
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 4aa61a1a3d5..c5b02b66f75 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -572,8 +572,8 @@ static void pxa_irda_startup(struct pxa_irda *si)
ICCR2 = ICCR2_TXP | ICCR2_TRIG_32;
/* configure DMAC */
- DRCMR17 = si->rxdma | DRCMR_MAPVLD;
- DRCMR18 = si->txdma | DRCMR_MAPVLD;
+ DRCMR(17) = si->rxdma | DRCMR_MAPVLD;
+ DRCMR(18) = si->txdma | DRCMR_MAPVLD;
/* force SIR reinitialization */
si->speed = 4000000;
@@ -602,8 +602,8 @@ static void pxa_irda_shutdown(struct pxa_irda *si)
/* disable the STUART or FICP clocks */
pxa_irda_disable_clk(si);
- DRCMR17 = 0;
- DRCMR18 = 0;
+ DRCMR(17) = 0;
+ DRCMR(18) = 0;
local_irq_restore(flags);
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 24768c10cad..e332a518efe 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1520,7 +1520,9 @@ smc_open(struct net_device *dev)
/* Setup the default Register Modes */
lp->tcr_cur_mode = TCR_DEFAULT;
lp->rcr_cur_mode = RCR_DEFAULT;
- lp->rpc_cur_mode = RPC_DEFAULT;
+ lp->rpc_cur_mode = RPC_DEFAULT |
+ lp->cfg.leda << RPC_LSXA_SHFT |
+ lp->cfg.ledb << RPC_LSXB_SHFT;
/*
* If we are not using a MII interface, we need to
@@ -2157,6 +2159,11 @@ static int smc_drv_probe(struct platform_device *pdev)
lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
}
+ if (!lp->cfg.leda && !lp->cfg.ledb) {
+ lp->cfg.leda = RPC_LSA_DEFAULT;
+ lp->cfg.ledb = RPC_LSB_DEFAULT;
+ }
+
ndev->dma = (unsigned char)-1;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 997e7f1d5c6..160873f0a81 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -43,7 +43,8 @@
#if defined(CONFIG_ARCH_LUBBOCK) ||\
defined(CONFIG_MACH_MAINSTONE) ||\
defined(CONFIG_MACH_ZYLONITE) ||\
- defined(CONFIG_MACH_LITTLETON)
+ defined(CONFIG_MACH_LITTLETON) ||\
+ defined(CONFIG_ARCH_VIPER)
#include <asm/mach-types.h>
@@ -778,14 +779,6 @@ smc_pxa_dma_irq(int dma, void *dummy)
#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
-#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
-#define RPC_LED_RES (0x01) // LED = Reserved
-#define RPC_LED_10 (0x02) // LED = 10Mbps link detect
-#define RPC_LED_FD (0x03) // LED = Full Duplex Mode
-#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
-#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
-#define RPC_LED_TX (0x06) // LED = TX packet occurred
-#define RPC_LED_RX (0x07) // LED = RX packet occurred
#ifndef RPC_LSA_DEFAULT
#define RPC_LSA_DEFAULT RPC_LED_100
@@ -794,7 +787,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
#define RPC_LSB_DEFAULT RPC_LED_FD
#endif
-#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
+#define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX)
/* Bank 0 0x0C is reserved */
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index e0f884034c9..f57eeae3830 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -220,7 +220,8 @@ config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
- || MACH_ARMCORE || ARCH_PXA_PALM)
+ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCH_VIPER)
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 269a9e913ba..a87902de8d3 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o
obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o
obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
-obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o pxa2xx_cs.o
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
@@ -68,9 +67,14 @@ sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
-pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
-pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
-pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
-pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o
-pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
+pxa2xx_lubbock_cs-y += pxa2xx_lubbock.o sa1111_generic.o
+pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o
+pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
+pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
+pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
+pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
+pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps.o
+pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
+pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
+obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 1b07af5a2ed..13f1e0fd3f3 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -30,6 +30,7 @@
#include <asm/system.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
+#include <asm/mach-types.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
@@ -166,18 +167,32 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
}
#endif
+static void pxa2xx_configure_sockets(struct device *dev)
+{
+ struct pcmcia_low_level *ops = dev->platform_data;
+
+ /*
+ * We have at least one socket, so set MECR:CIT
+ * (Card Is There)
+ */
+ MECR |= MECR_CIT;
+
+ /* Set MECR:NOS (Number Of Sockets) */
+ if (ops->nr > 1 || machine_is_viper())
+ MECR |= MECR_NOS;
+ else
+ MECR &= ~MECR_NOS;
+}
+
int __pxa2xx_drv_pcmcia_probe(struct device *dev)
{
int ret;
struct pcmcia_low_level *ops;
- int first, nr;
if (!dev || !dev->platform_data)
return -ENODEV;
ops = (struct pcmcia_low_level *)dev->platform_data;
- first = ops->first;
- nr = ops->nr;
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
@@ -185,21 +200,10 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev)
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
- ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+ ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
- if (ret == 0) {
- /*
- * We have at least one socket, so set MECR:CIT
- * (Card Is There)
- */
- MECR |= MECR_CIT;
-
- /* Set MECR:NOS (Number Of Sockets) */
- if (nr > 1)
- MECR |= MECR_NOS;
- else
- MECR &= ~MECR_NOS;
- }
+ if (!ret)
+ pxa2xx_configure_sockets(dev);
return ret;
}
@@ -223,11 +227,7 @@ static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t s
static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
{
- struct pcmcia_low_level *ops = dev->dev.platform_data;
- int nr = ops ? ops->nr : 0;
-
- MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
-
+ pxa2xx_configure_sockets(&dev->dev);
return pcmcia_socket_dev_resume(&dev->dev);
}
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
new file mode 100644
index 00000000000..7c8bcb47662
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -0,0 +1,154 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x255.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007, 2008
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/pxa-regs.h>
+
+#include "soc_common.h"
+
+#define GPIO_PCMCIA_SKTSEL (54)
+#define GPIO_PCMCIA_S0_CD_VALID (16)
+#define GPIO_PCMCIA_S1_CD_VALID (17)
+#define GPIO_PCMCIA_S0_RDYINT (6)
+#define GPIO_PCMCIA_S1_RDYINT (8)
+#define GPIO_PCMCIA_RESET (9)
+
+#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S1_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S1_CD_VALID)
+#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S1_RDYINT IRQ_GPIO(GPIO_PCMCIA_S1_RDYINT)
+
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+ { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+};
+
+static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(GPIO_PCMCIA_RESET, 0);
+
+ skt->irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+ ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (!ret)
+ gpio_free(GPIO_PCMCIA_RESET);
+
+ return ret;
+}
+
+static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ gpio_free(GPIO_PCMCIA_RESET);
+}
+
+
+static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ int cd = skt->nr ? GPIO_PCMCIA_S1_CD_VALID : GPIO_PCMCIA_S0_CD_VALID;
+ int rdy = skt->nr ? GPIO_PCMCIA_S0_RDYINT : GPIO_PCMCIA_S1_RDYINT;
+
+ state->detect = !gpio_get_value(cd);
+ state->ready = !!gpio_get_value(rdy);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->vs_3v = 0;
+ state->vs_Xv = 0;
+ state->wrprot = 0; /* not available */
+}
+
+
+static int cmx255_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ switch (skt->nr) {
+ case 0:
+ if (state->flags & SS_RESET) {
+ gpio_set_value(GPIO_PCMCIA_SKTSEL, 0);
+ udelay(1);
+ gpio_set_value(GPIO_PCMCIA_RESET, 1);
+ udelay(10);
+ gpio_set_value(GPIO_PCMCIA_RESET, 0);
+ }
+ break;
+ case 1:
+ if (state->flags & SS_RESET) {
+ gpio_set_value(GPIO_PCMCIA_SKTSEL, 1);
+ udelay(1);
+ gpio_set_value(GPIO_PCMCIA_RESET, 1);
+ udelay(10);
+ gpio_set_value(GPIO_PCMCIA_RESET, 0);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static void cmx255_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void cmx255_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+
+static struct pcmcia_low_level cmx255_pcmcia_ops __initdata = {
+ .owner = THIS_MODULE,
+ .hw_init = cmx255_pcmcia_hw_init,
+ .hw_shutdown = cmx255_pcmcia_shutdown,
+ .socket_state = cmx255_pcmcia_socket_state,
+ .configure_socket = cmx255_pcmcia_configure_socket,
+ .socket_init = cmx255_pcmcia_socket_init,
+ .socket_suspend = cmx255_pcmcia_socket_suspend,
+ .nr = 1,
+};
+
+static struct platform_device *cmx255_pcmcia_device;
+
+int __init cmx255_pcmcia_init(void)
+{
+ int ret;
+
+ cmx255_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+
+ if (!cmx255_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(cmx255_pcmcia_device, &cmx255_pcmcia_ops,
+ sizeof(cmx255_pcmcia_ops));
+
+ if (ret == 0) {
+ printk(KERN_INFO "Registering cm-x255 PCMCIA interface.\n");
+ ret = platform_device_add(cmx255_pcmcia_device);
+ }
+
+ if (ret)
+ platform_device_put(cmx255_pcmcia_device);
+
+ return ret;
+}
+
+void __exit cmx255_pcmcia_exit(void)
+{
+ platform_device_unregister(cmx255_pcmcia_device);
+}
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bcff5cfed05..6c3aac37712 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -105,13 +105,10 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
static struct platform_device *cmx270_pcmcia_device;
-static int __init cmx270_pcmcia_init(void)
+int __init cmx270_pcmcia_init(void)
{
int ret;
- if (!machine_is_armcore())
- return -ENODEV;
-
cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!cmx270_pcmcia_device)
@@ -131,14 +128,7 @@ static int __init cmx270_pcmcia_init(void)
return ret;
}
-static void __exit cmx270_pcmcia_exit(void)
+void __exit cmx270_pcmcia_exit(void)
{
platform_device_unregister(cmx270_pcmcia_device);
}
-
-module_init(cmx270_pcmcia_init);
-module_exit(cmx270_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
-MODULE_DESCRIPTION("CM-x270 PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_cm_x2xx.c b/drivers/pcmcia/pxa2xx_cm_x2xx.c
new file mode 100644
index 00000000000..4f09506ad8d
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x2xx.c
@@ -0,0 +1,49 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007, 2008
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <mach/system.h>
+
+int cmx255_pcmcia_init(void);
+int cmx270_pcmcia_init(void);
+void cmx255_pcmcia_exit(void);
+void cmx270_pcmcia_exit(void);
+
+static int __init cmx2xx_pcmcia_init(void)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_armcore() && cpu_is_pxa25x())
+ ret = cmx255_pcmcia_init();
+ else if (machine_is_armcore() && cpu_is_pxa27x())
+ ret = cmx270_pcmcia_init();
+
+ return ret;
+}
+
+static void __exit cmx2xx_pcmcia_exit(void)
+{
+ if (machine_is_armcore() && cpu_is_pxa25x())
+ cmx255_pcmcia_exit();
+ else if (machine_is_armcore() && cpu_is_pxa27x())
+ cmx270_pcmcia_exit();
+}
+
+module_init(cmx2xx_pcmcia_init);
+module_exit(cmx2xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x2xx PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
new file mode 100644
index 00000000000..1736c67e547
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -0,0 +1,151 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmld.c
+ *
+ * Driver for Palm LifeDrive PCMCIA
+ *
+ * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmld.h>
+#include "soc_common.h"
+
+static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
+ if (ret)
+ goto err4;
+
+ skt->irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
+ return 0;
+
+err4:
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
+err3:
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
+err2:
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+err1:
+ return ret;
+}
+
+static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+}
+
+static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = 1; /* always inserted */
+ state->ready = !!gpio_get_value(GPIO_NR_PALMLD_PCMCIA_READY);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
+ gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
+ !!(state->flags & SS_RESET));
+
+ return 0;
+}
+
+static void palmld_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmld_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmld_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .first = 0,
+ .nr = 2,
+
+ .hw_init = palmld_pcmcia_hw_init,
+ .hw_shutdown = palmld_pcmcia_hw_shutdown,
+
+ .socket_state = palmld_pcmcia_socket_state,
+ .configure_socket = palmld_pcmcia_configure_socket,
+
+ .socket_init = palmld_pcmcia_socket_init,
+ .socket_suspend = palmld_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmld_pcmcia_device;
+
+static int __init palmld_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_palmld())
+ return -ENODEV;
+
+ palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!palmld_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
+ sizeof(palmld_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(palmld_pcmcia_device);
+
+ if (ret)
+ platform_device_put(palmld_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit palmld_pcmcia_exit(void)
+{
+ platform_device_unregister(palmld_pcmcia_device);
+}
+
+module_init(palmld_pcmcia_init);
+module_exit(palmld_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+ " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
new file mode 100644
index 00000000000..36c7a0b324d
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -0,0 +1,256 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_trizeps4.c
+ *
+ * TRIZEPS PCMCIA specific routines.
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/trizeps4.h>
+
+#include "soc_common.h"
+
+extern void board_pcmcia_power(int power);
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" }
+ /* on other baseboards we can have more inputs */
+};
+
+static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret, i;
+ /* we dont have voltage/card/ready detection
+ * so we dont need interrupts for it
+ */
+ switch (skt->nr) {
+ case 0:
+ if (gpio_request(GPIO_PRDY, "cf_irq") < 0) {
+ pr_err("%s: sock %d unable to request gpio %d\n", __func__,
+ skt->nr, GPIO_PRDY);
+ return -EBUSY;
+ }
+ if (gpio_direction_input(GPIO_PRDY) < 0) {
+ pr_err("%s: sock %d unable to set input gpio %d\n", __func__,
+ skt->nr, GPIO_PRDY);
+ gpio_free(GPIO_PRDY);
+ return -EINVAL;
+ }
+ skt->irq = IRQ_GPIO(GPIO_PRDY);
+ break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+ case 1:
+#endif
+ default:
+ break;
+ }
+ /* release the reset of this card */
+ pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->irq);
+
+ /* supplementory irqs for the socket */
+ for (i = 0; i < ARRAY_SIZE(irqs); i++) {
+ if (irqs[i].sock != skt->nr)
+ continue;
+ if (gpio_request(IRQ_TO_GPIO(irqs[i].irq), irqs[i].str) < 0) {
+ pr_err("%s: sock %d unable to request gpio %d\n",
+ __func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+ ret = -EBUSY;
+ goto error;
+ }
+ if (gpio_direction_input(IRQ_TO_GPIO(irqs[i].irq)) < 0) {
+ pr_err("%s: sock %d unable to set input gpio %d\n",
+ __func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+ ret = -EINVAL;
+ goto error;
+ }
+ }
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+error:
+ for (; i >= 0; i--) {
+ gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+ }
+ return (ret);
+}
+
+static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ int i;
+ /* free allocated gpio's */
+ gpio_free(GPIO_PRDY);
+ for (i = 0; i < ARRAY_SIZE(irqs); i++)
+ gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+}
+
+static unsigned long trizeps_pcmcia_status[2];
+
+static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ unsigned short status = 0, change;
+ status = CFSR_readw();
+ change = (status ^ trizeps_pcmcia_status[skt->nr]) &
+ ConXS_CFSR_BVD_MASK;
+ if (change) {
+ trizeps_pcmcia_status[skt->nr] = status;
+ if (status & ConXS_CFSR_BVD1) {
+ /* enable_irq empty */
+ } else {
+ /* disable_irq empty */
+ }
+ }
+
+ switch (skt->nr) {
+ case 0:
+ /* just fill in fix states */
+ state->detect = gpio_get_value(GPIO_PCD) ? 0 : 1;
+ state->ready = gpio_get_value(GPIO_PRDY) ? 1 : 0;
+ state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0;
+ state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0;
+ state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1;
+ state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1;
+ state->wrprot = 0; /* not available */
+ break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+ /* on ConXS we only have one slot. Second is inactive */
+ case 1:
+ state->detect = 0;
+ state->ready = 0;
+ state->bvd1 = 0;
+ state->bvd2 = 0;
+ state->vs_3v = 0;
+ state->vs_Xv = 0;
+ state->wrprot = 0;
+ break;
+
+#endif
+ }
+}
+
+static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ int ret = 0;
+ unsigned short power = 0;
+
+ /* we do nothing here just check a bit */
+ switch (state->Vcc) {
+ case 0: power &= 0xfc; break;
+ case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
+ case 50:
+ pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
+ break;
+ default:
+ pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
+ ret = -1;
+ }
+
+ switch (state->Vpp) {
+ case 0: power &= 0xf3; break;
+ case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
+ case 120:
+ pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
+ break;
+ default:
+ if (state->Vpp != state->Vcc) {
+ pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
+ ret = -1;
+ }
+ }
+
+ switch (skt->nr) {
+ case 0: /* we only have 3.3V */
+ board_pcmcia_power(power);
+ break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+ /* on ConXS we only have one slot. Second is inactive */
+ case 1:
+#endif
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+ /* default is on */
+ board_pcmcia_power(0x9);
+}
+
+static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+ board_pcmcia_power(0x0);
+}
+
+static struct pcmcia_low_level trizeps_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = trizeps_pcmcia_hw_init,
+ .hw_shutdown = trizeps_pcmcia_hw_shutdown,
+ .socket_state = trizeps_pcmcia_socket_state,
+ .configure_socket = trizeps_pcmcia_configure_socket,
+ .socket_init = trizeps_pcmcia_socket_init,
+ .socket_suspend = trizeps_pcmcia_socket_suspend,
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+ .nr = 1,
+#else
+ .nr = 2,
+#endif
+ .first = 0,
+};
+
+static struct platform_device *trizeps_pcmcia_device;
+
+static int __init trizeps_pcmcia_init(void)
+{
+ int ret;
+
+ trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!trizeps_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(trizeps_pcmcia_device,
+ &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
+
+ if (ret == 0)
+ ret = platform_device_add(trizeps_pcmcia_device);
+
+ if (ret)
+ platform_device_put(trizeps_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit trizeps_pcmcia_exit(void)
+{
+ platform_device_unregister(trizeps_pcmcia_device);
+}
+
+fs_initcall(trizeps_pcmcia_init);
+module_exit(trizeps_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juergen Schindele");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
new file mode 100644
index 00000000000..dd10481be7b
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -0,0 +1,179 @@
+/*
+ * VIPER PCMCIA support
+ * Copyright 2004 Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Based on:
+ * iPAQ h2200 PCMCIA support
+ * Copyright 2004 Koen Kooi <koen@vestingbar.nl>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/viper.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+#include "pxa2xx_base.h"
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" }
+};
+
+static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ unsigned long flags;
+
+ skt->irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
+
+ if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
+ goto err_request_cd;
+
+ if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready"))
+ goto err_request_rdy;
+
+ if (gpio_request(VIPER_CF_POWER_GPIO, "CF power"))
+ goto err_request_pwr;
+
+ local_irq_save(flags);
+
+ /* GPIO 82 is the CF power enable line. initially off */
+ if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) ||
+ gpio_direction_input(VIPER_CF_CD_GPIO) ||
+ gpio_direction_input(VIPER_CF_RDY_GPIO)) {
+ local_irq_restore(flags);
+ goto err_dir;
+ }
+
+ local_irq_restore(flags);
+
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+err_dir:
+ gpio_free(VIPER_CF_POWER_GPIO);
+err_request_pwr:
+ gpio_free(VIPER_CF_RDY_GPIO);
+err_request_rdy:
+ gpio_free(VIPER_CF_CD_GPIO);
+err_request_cd:
+ printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n");
+ return -1;
+}
+
+/*
+ * Release all resources.
+ */
+static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ gpio_free(VIPER_CF_POWER_GPIO);
+ gpio_free(VIPER_CF_RDY_GPIO);
+ gpio_free(VIPER_CF_CD_GPIO);
+}
+
+static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1;
+ state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1; /* Can only apply 3.3V */
+ state->vs_Xv = 0;
+}
+
+static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ /* Silently ignore Vpp, output enable, speaker enable. */
+ viper_cf_rst(state->flags & SS_RESET);
+
+ /* Apply socket voltage */
+ switch (state->Vcc) {
+ case 0:
+ gpio_set_value(VIPER_CF_POWER_GPIO, 0);
+ break;
+ case 33:
+ gpio_set_value(VIPER_CF_POWER_GPIO, 1);
+ break;
+ default:
+ printk(KERN_ERR "%s: Unsupported Vcc:%d\n",
+ __func__, state->Vcc);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void viper_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
+ .owner = THIS_MODULE,
+ .hw_init = viper_pcmcia_hw_init,
+ .hw_shutdown = viper_pcmcia_hw_shutdown,
+ .socket_state = viper_pcmcia_socket_state,
+ .configure_socket = viper_pcmcia_configure_socket,
+ .socket_init = viper_pcmcia_socket_init,
+ .socket_suspend = viper_pcmcia_socket_suspend,
+ .nr = 1,
+};
+
+static struct platform_device *viper_pcmcia_device;
+
+static int __init viper_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_viper())
+ return -ENODEV;
+
+ viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!viper_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(viper_pcmcia_device,
+ &viper_pcmcia_ops,
+ sizeof(viper_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(viper_pcmcia_device);
+
+ if (ret)
+ platform_device_put(viper_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit viper_pcmcia_exit(void)
+{
+ platform_device_unregister(viper_pcmcia_device);
+}
+
+module_init(viper_pcmcia_init);
+module_exit(viper_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9ce55850271..1982f8b4278 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -56,10 +56,10 @@ config BATTERY_TOSA
Say Y to enable support for the battery on the Sharp Zaurus
SL-6000 (tosa) models.
-config BATTERY_PALMTX
- tristate "Palm T|X battery"
- depends on MACH_PALMTX
+config BATTERY_WM97XX
+ bool "WM97xx generic battery driver"
+ depends on TOUCHSCREEN_WM97XX
help
- Say Y to enable support for the battery in Palm T|X.
+ Say Y to enable support for battery measured by WM97xx aux port.
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 4706bf8ff45..4e20026cc45 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -21,4 +21,4 @@ obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
-obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
+obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o \ No newline at end of file
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
deleted file mode 100644
index 7035bfa41c6..00000000000
--- a/drivers/power/palmtx_battery.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * linux/drivers/power/palmtx_battery.c
- *
- * Battery measurement code for Palm T|X Handheld computer
- *
- * based on tosa_battery.c
- *
- * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtx.h>
-
-static DEFINE_MUTEX(bat_lock);
-static struct work_struct bat_work;
-struct mutex work_lock;
-int bat_status = POWER_SUPPLY_STATUS_DISCHARGING;
-
-static unsigned long palmtx_read_bat(struct power_supply *bat_ps)
-{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
- WM97XX_AUX_ID3) * 1000 / 414;
-}
-
-static unsigned long palmtx_read_temp(struct power_supply *bat_ps)
-{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
- WM97XX_AUX_ID2);
-}
-
-static int palmtx_bat_get_property(struct power_supply *bat_ps,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- val->intval = bat_status;
- break;
- case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = palmtx_read_bat(bat_ps);
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MAX:
- case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- val->intval = PALMTX_BAT_MAX_VOLTAGE;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = PALMTX_BAT_MIN_VOLTAGE;
- break;
- case POWER_SUPPLY_PROP_TEMP:
- val->intval = palmtx_read_temp(bat_ps);
- break;
- case POWER_SUPPLY_PROP_PRESENT:
- val->intval = 1;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static void palmtx_bat_external_power_changed(struct power_supply *bat_ps)
-{
- schedule_work(&bat_work);
-}
-
-static char *status_text[] = {
- [POWER_SUPPLY_STATUS_UNKNOWN] = "Unknown",
- [POWER_SUPPLY_STATUS_CHARGING] = "Charging",
- [POWER_SUPPLY_STATUS_DISCHARGING] = "Discharging",
-};
-
-static void palmtx_bat_update(struct power_supply *bat_ps)
-{
- int old_status = bat_status;
-
- mutex_lock(&work_lock);
-
- bat_status = gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT) ?
- POWER_SUPPLY_STATUS_CHARGING :
- POWER_SUPPLY_STATUS_DISCHARGING;
-
- if (old_status != bat_status) {
- pr_debug("%s %s -> %s\n", bat_ps->name,
- status_text[old_status],
- status_text[bat_status]);
- power_supply_changed(bat_ps);
- }
-
- mutex_unlock(&work_lock);
-}
-
-static enum power_supply_property palmtx_bat_main_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_VOLTAGE_MAX,
- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_PRESENT,
-};
-
-struct power_supply bat_ps = {
- .name = "main-battery",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .properties = palmtx_bat_main_props,
- .num_properties = ARRAY_SIZE(palmtx_bat_main_props),
- .get_property = palmtx_bat_get_property,
- .external_power_changed = palmtx_bat_external_power_changed,
- .use_for_apm = 1,
-};
-
-static void palmtx_bat_work(struct work_struct *work)
-{
- palmtx_bat_update(&bat_ps);
-}
-
-#ifdef CONFIG_PM
-static int palmtx_bat_suspend(struct platform_device *dev, pm_message_t state)
-{
- flush_scheduled_work();
- return 0;
-}
-
-static int palmtx_bat_resume(struct platform_device *dev)
-{
- schedule_work(&bat_work);
- return 0;
-}
-#else
-#define palmtx_bat_suspend NULL
-#define palmtx_bat_resume NULL
-#endif
-
-static int __devinit palmtx_bat_probe(struct platform_device *dev)
-{
- int ret = 0;
-
- if (!machine_is_palmtx())
- return -ENODEV;
-
- mutex_init(&work_lock);
-
- INIT_WORK(&bat_work, palmtx_bat_work);
-
- ret = power_supply_register(&dev->dev, &bat_ps);
- if (!ret)
- schedule_work(&bat_work);
-
- return ret;
-}
-
-static int __devexit palmtx_bat_remove(struct platform_device *dev)
-{
- power_supply_unregister(&bat_ps);
- return 0;
-}
-
-static struct platform_driver palmtx_bat_driver = {
- .driver.name = "wm97xx-battery",
- .driver.owner = THIS_MODULE,
- .probe = palmtx_bat_probe,
- .remove = __devexit_p(palmtx_bat_remove),
- .suspend = palmtx_bat_suspend,
- .resume = palmtx_bat_resume,
-};
-
-static int __init palmtx_bat_init(void)
-{
- return platform_driver_register(&palmtx_bat_driver);
-}
-
-static void __exit palmtx_bat_exit(void)
-{
- platform_driver_unregister(&palmtx_bat_driver);
-}
-
-module_init(palmtx_bat_init);
-module_exit(palmtx_bat_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("Palm T|X battery driver");
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
new file mode 100644
index 00000000000..8bde92126d3
--- /dev/null
+++ b/drivers/power/wm97xx_battery.c
@@ -0,0 +1,272 @@
+/*
+ * linux/drivers/power/wm97xx_battery.c
+ *
+ * Battery measurement code for WM97xx
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+
+static DEFINE_MUTEX(bat_lock);
+static struct work_struct bat_work;
+struct mutex work_lock;
+static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+static struct wm97xx_batt_info *pdata;
+static enum power_supply_property *prop;
+
+static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
+{
+ return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ pdata->batt_aux) * pdata->batt_mult /
+ pdata->batt_div;
+}
+
+static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
+{
+ return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ pdata->temp_aux) * pdata->temp_mult /
+ pdata->temp_div;
+}
+
+static int wm97xx_bat_get_property(struct power_supply *bat_ps,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat_status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = pdata->batt_tech;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (pdata->batt_aux >= 0)
+ val->intval = wm97xx_read_bat(bat_ps);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (pdata->temp_aux >= 0)
+ val->intval = wm97xx_read_temp(bat_ps);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (pdata->max_voltage >= 0)
+ val->intval = pdata->max_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ if (pdata->min_voltage >= 0)
+ val->intval = pdata->min_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
+{
+ schedule_work(&bat_work);
+}
+
+static void wm97xx_bat_update(struct power_supply *bat_ps)
+{
+ int old_status = bat_status;
+
+ mutex_lock(&work_lock);
+
+ bat_status = (pdata->charge_gpio >= 0) ?
+ (gpio_get_value(pdata->charge_gpio) ?
+ POWER_SUPPLY_STATUS_DISCHARGING :
+ POWER_SUPPLY_STATUS_CHARGING) :
+ POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (old_status != bat_status) {
+ pr_debug("%s: %i -> %i\n", bat_ps->name, old_status,
+ bat_status);
+ power_supply_changed(bat_ps);
+ }
+
+ mutex_unlock(&work_lock);
+}
+
+static struct power_supply bat_ps = {
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = wm97xx_bat_get_property,
+ .external_power_changed = wm97xx_bat_external_power_changed,
+ .use_for_apm = 1,
+};
+
+static void wm97xx_bat_work(struct work_struct *work)
+{
+ wm97xx_bat_update(&bat_ps);
+}
+
+#ifdef CONFIG_PM
+static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+ flush_scheduled_work();
+ return 0;
+}
+
+static int wm97xx_bat_resume(struct platform_device *dev)
+{
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define wm97xx_bat_suspend NULL
+#define wm97xx_bat_resume NULL
+#endif
+
+static int __devinit wm97xx_bat_probe(struct platform_device *dev)
+{
+ int ret = 0;
+ int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
+ int i = 0;
+
+ if (dev->id != -1)
+ return -EINVAL;
+
+ mutex_init(&work_lock);
+
+ if (!pdata) {
+ dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
+ return -EINVAL;
+ }
+
+ if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) {
+ ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
+ if (ret)
+ goto err;
+ ret = gpio_direction_input(pdata->charge_gpio);
+ if (ret)
+ goto err2;
+ props++; /* POWER_SUPPLY_PROP_STATUS */
+ }
+
+ if (pdata->batt_tech >= 0)
+ props++; /* POWER_SUPPLY_PROP_TECHNOLOGY */
+ if (pdata->temp_aux >= 0)
+ props++; /* POWER_SUPPLY_PROP_TEMP */
+ if (pdata->batt_aux >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+ if (pdata->max_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+ if (pdata->min_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+ prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ goto err2;
+
+ prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+ if (pdata->charge_gpio >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_STATUS;
+ if (pdata->batt_tech >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+ if (pdata->temp_aux >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TEMP;
+ if (pdata->batt_aux >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ if (pdata->max_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ if (pdata->min_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+ INIT_WORK(&bat_work, wm97xx_bat_work);
+
+ if (!pdata->batt_name) {
+ dev_info(&dev->dev, "Please consider setting proper battery "
+ "name in platform definition file, falling "
+ "back to name \"wm97xx-batt\"\n");
+ bat_ps.name = "wm97xx-batt";
+ } else
+ bat_ps.name = pdata->batt_name;
+
+ bat_ps.properties = prop;
+ bat_ps.num_properties = props;
+
+ ret = power_supply_register(&dev->dev, &bat_ps);
+ if (!ret)
+ schedule_work(&bat_work);
+ else
+ goto err3;
+
+ return 0;
+err3:
+ kfree(prop);
+err2:
+ gpio_free(pdata->charge_gpio);
+err:
+ return ret;
+}
+
+static int __devexit wm97xx_bat_remove(struct platform_device *dev)
+{
+ if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0)
+ gpio_free(pdata->charge_gpio);
+ flush_scheduled_work();
+ power_supply_unregister(&bat_ps);
+ kfree(prop);
+ return 0;
+}
+
+static struct platform_driver wm97xx_bat_driver = {
+ .driver = {
+ .name = "wm97xx-battery",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm97xx_bat_probe,
+ .remove = __devexit_p(wm97xx_bat_remove),
+ .suspend = wm97xx_bat_suspend,
+ .resume = wm97xx_bat_resume,
+};
+
+static int __init wm97xx_bat_init(void)
+{
+ return platform_driver_register(&wm97xx_bat_driver);
+}
+
+static void __exit wm97xx_bat_exit(void)
+{
+ platform_driver_unregister(&wm97xx_bat_driver);
+}
+
+void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
+{
+ pdata = data;
+}
+EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
+
+module_init(wm97xx_bat_init);
+module_exit(wm97xx_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("WM97xx battery driver");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563d873..8058533f841 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2211,9 +2211,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
serial_outp(up, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP15XX
+#ifdef CONFIG_ARCH_OMAP
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) {
+ if (cpu_is_omap1510() && is_omap_port(up)) {
if (baud == 115200) {
quot = 1;
serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
@@ -2266,18 +2266,27 @@ serial8250_pm(struct uart_port *port, unsigned int state,
p->pm(port, state, oldstate);
}
+static unsigned int serial8250_port_size(struct uart_8250_port *pt)
+{
+ if (pt->port.iotype == UPIO_AU)
+ return 0x100000;
+#ifdef CONFIG_ARCH_OMAP
+ if (is_omap_port(pt))
+ return 0x16 << pt->port.regshift;
+#endif
+ return 8 << pt->port.regshift;
+}
+
/*
* Resource handling.
*/
static int serial8250_request_std_resource(struct uart_8250_port *up)
{
- unsigned int size = 8 << up->port.regshift;
+ unsigned int size = serial8250_port_size(up);
int ret = 0;
switch (up->port.iotype) {
case UPIO_AU:
- size = 0x100000;
- /* fall thru */
case UPIO_TSI:
case UPIO_MEM32:
case UPIO_MEM:
@@ -2311,12 +2320,10 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
static void serial8250_release_std_resource(struct uart_8250_port *up)
{
- unsigned int size = 8 << up->port.regshift;
+ unsigned int size = serial8250_port_size(up);
switch (up->port.iotype) {
case UPIO_AU:
- size = 0x100000;
- /* fall thru */
case UPIO_TSI:
case UPIO_MEM32:
case UPIO_MEM:
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f7a0d37c422..abc00be5543 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -534,6 +534,11 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_IER, up->ier);
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ else
+ up->mcr &= ~UART_MCR_AFE;
+
serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index b9cbfc87f61..998e89dc5aa 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -63,8 +63,44 @@
#define UART_DUMMY_LSR_RX 0x100
#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
+static inline int tx_enabled(struct uart_port *port)
+{
+ return port->unused[0] & 1;
+}
+
+static inline int rx_enabled(struct uart_port *port)
+{
+ return port->unused[0] & 2;
+}
+
+static inline int ms_enabled(struct uart_port *port)
+{
+ return port->unused[0] & 4;
+}
+
+static inline void ms_enable(struct uart_port *port, int enabled)
+{
+ if(enabled)
+ port->unused[0] |= 4;
+ else
+ port->unused[0] &= ~4;
+}
+
+static inline void rx_enable(struct uart_port *port, int enabled)
+{
+ if(enabled)
+ port->unused[0] |= 2;
+ else
+ port->unused[0] &= ~2;
+}
+
+static inline void tx_enable(struct uart_port *port, int enabled)
+{
+ if(enabled)
+ port->unused[0] |= 1;
+ else
+ port->unused[0] &= ~1;
+}
#ifdef SUPPORT_SYSRQ
@@ -75,7 +111,7 @@ static void ks8695uart_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
disable_irq(KS8695_IRQ_UART_TX);
- tx_enabled(port) = 0;
+ tx_enable(port, 0);
}
}
@@ -83,7 +119,7 @@ static void ks8695uart_start_tx(struct uart_port *port)
{
if (!tx_enabled(port)) {
enable_irq(KS8695_IRQ_UART_TX);
- tx_enabled(port) = 1;
+ tx_enable(port, 1);
}
}
@@ -91,18 +127,24 @@ static void ks8695uart_stop_rx(struct uart_port *port)
{
if (rx_enabled(port)) {
disable_irq(KS8695_IRQ_UART_RX);
- rx_enabled(port) = 0;
+ rx_enable(port, 0);
}
}
static void ks8695uart_enable_ms(struct uart_port *port)
{
- enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ if (!ms_enabled(port)) {
+ enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ ms_enable(port,1);
+ }
}
static void ks8695uart_disable_ms(struct uart_port *port)
{
- disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ if (ms_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+ ms_enable(port,0);
+ }
}
static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
@@ -285,8 +327,9 @@ static int ks8695uart_startup(struct uart_port *port)
int retval;
set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
- tx_enabled(port) = 0;
- rx_enabled(port) = 1;
+ tx_enable(port, 0);
+ rx_enable(port, 1);
+ ms_enable(port, 1);
/*
* Allocate the IRQ
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 9d2186fd74a..454a2712e62 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -119,12 +119,14 @@ struct omap2_mcspi {
struct clk *fck;
/* Virtual base address of the controller */
void __iomem *base;
+ unsigned long phys;
/* SPI1 has 4 channels, while SPI2 has 2 */
struct omap2_mcspi_dma *dma_channels;
};
struct omap2_mcspi_cs {
void __iomem *base;
+ unsigned long phys;
int word_len;
};
@@ -233,7 +235,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
c = count;
word_len = cs->word_len;
- base = (unsigned long) io_v2p(cs->base);
+ base = cs->phys;
tx_reg = base + OMAP2_MCSPI_TX0;
rx_reg = base + OMAP2_MCSPI_RX0;
rx = xfer->rx_buf;
@@ -633,6 +635,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
if (!cs)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
+ cs->phys = mcspi->phys + spi->chip_select * 0x14;
spi->controller_state = cs;
}
@@ -1005,7 +1008,13 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
goto err1;
}
- mcspi->base = (void __iomem *) io_p2v(r->start);
+ mcspi->phys = r->start;
+ mcspi->base = ioremap(r->start, r->end - r->start + 1);
+ if (!mcspi->base) {
+ dev_dbg(&pdev->dev, "can't ioremap MCSPI\n");
+ status = -ENOMEM;
+ goto err1aa;
+ }
INIT_WORK(&mcspi->work, omap2_mcspi_work);
@@ -1055,6 +1064,8 @@ err3:
err2:
clk_put(mcspi->ick);
err1a:
+ iounmap(mcspi->base);
+err1aa:
release_mem_region(r->start, (r->end - r->start) + 1);
err1:
spi_master_put(master);
@@ -1067,6 +1078,7 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev)
struct omap2_mcspi *mcspi;
struct omap2_mcspi_dma *dma_channels;
struct resource *r;
+ void __iomem *base;
master = dev_get_drvdata(&pdev->dev);
mcspi = spi_master_get_devdata(master);
@@ -1078,7 +1090,9 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(r->start, (r->end - r->start) + 1);
+ base = mcspi->base;
spi_unregister_master(master);
+ iounmap(base);
kfree(dma_channels);
return 0;
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 5515eb97d7c..bab6ff061e9 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -59,7 +59,6 @@
* and irqs should show there too...
*/
#define UWIRE_BASE_PHYS 0xFFFB3000
-#define UWIRE_BASE ((void *__iomem)IO_ADDRESS(UWIRE_BASE_PHYS))
/* uWire Registers: */
#define UWIRE_IO_SIZE 0x20
@@ -103,16 +102,21 @@ struct uwire_state {
};
/* REVISIT compile time constant for idx_shift? */
+/*
+ * Or, put it in a structure which is used throughout the driver;
+ * that avoids having to issue two loads for each bit of static data.
+ */
static unsigned int uwire_idx_shift;
+static void __iomem *uwire_base;
static inline void uwire_write_reg(int idx, u16 val)
{
- __raw_writew(val, UWIRE_BASE + (idx << uwire_idx_shift));
+ __raw_writew(val, uwire_base + (idx << uwire_idx_shift));
}
static inline u16 uwire_read_reg(int idx)
{
- return __raw_readw(UWIRE_BASE + (idx << uwire_idx_shift));
+ return __raw_readw(uwire_base + (idx << uwire_idx_shift));
}
static inline void omap_uwire_configure_mode(u8 cs, unsigned long flags)
@@ -492,6 +496,14 @@ static int __init uwire_probe(struct platform_device *pdev)
return -ENODEV;
uwire = spi_master_get_devdata(master);
+
+ uwire_base = ioremap(UWIRE_BASE_PHYS, UWIRE_IO_SIZE);
+ if (!uwire_base) {
+ dev_dbg(&pdev->dev, "can't ioremap UWIRE\n");
+ spi_master_put(master);
+ return -ENOMEM;
+ }
+
dev_set_drvdata(&pdev->dev, uwire);
uwire->ck = clk_get(&pdev->dev, "armxor_ck");
@@ -520,8 +532,10 @@ static int __init uwire_probe(struct platform_device *pdev)
uwire->bitbang.txrx_bufs = uwire_txrx;
status = spi_bitbang_start(&uwire->bitbang);
- if (status < 0)
+ if (status < 0) {
uwire_off(uwire);
+ iounmap(uwire_base);
+ }
return status;
}
@@ -534,6 +548,7 @@ static int __exit uwire_remove(struct platform_device *pdev)
status = spi_bitbang_stop(&uwire->bitbang);
uwire_off(uwire);
+ iounmap(uwire_base);
return status;
}
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 95b3ec89c12..52218562962 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -344,7 +344,12 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
goto err1;
}
- hcd->regs = (void __iomem *) (int) IO_ADDRESS(hcd->rsrc_start);
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "can't ioremap OHCI HCD\n");
+ retval = -ENOMEM;
+ goto err2;
+ }
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
@@ -355,11 +360,11 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
retval = -ENXIO;
- goto err2;
+ goto err3;
}
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval)
- goto err2;
+ goto err3;
host_initialized = 1;
@@ -367,6 +372,8 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
omap_ohci_clock_power(0);
return 0;
+err3:
+ iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
@@ -401,6 +408,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
}
if (machine_is_omap_osk())
omap_free_gpio(9);
+ iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
clk_put(usb_dc_ck);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 7f0f35c7818..e294d430733 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -23,17 +23,90 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <mach/ohci.h>
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHCREV (0x0000) /* UHC HCI Spec Revision */
+#define UHCHCON (0x0004) /* UHC Host Control Register */
+#define UHCCOMS (0x0008) /* UHC Command Status Register */
+#define UHCINTS (0x000C) /* UHC Interrupt Status Register */
+#define UHCINTE (0x0010) /* UHC Interrupt Enable */
+#define UHCINTD (0x0014) /* UHC Interrupt Disable */
+#define UHCHCCA (0x0018) /* UHC Host Controller Comm. Area */
+#define UHCPCED (0x001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED (0x0020) /* UHC Control Head Endpt Descr */
+#define UHCCCED (0x0024) /* UHC Control Current Endpt Descr */
+#define UHCBHED (0x0028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED (0x002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD (0x0030) /* UHC Done Head */
+#define UHCFMI (0x0034) /* UHC Frame Interval */
+#define UHCFMR (0x0038) /* UHC Frame Remaining */
+#define UHCFMN (0x003C) /* UHC Frame Number */
+#define UHCPERS (0x0040) /* UHC Periodic Start */
+#define UHCLS (0x0044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA (0x0048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
+#define UHCRHDA_OCPM (1 << 11) /* Over Current Protection Mode */
+#define UHCRHDA_POTPGT(x) \
+ (((x) & 0xff) << 24) /* Power On To Power Good Time */
+
+#define UHCRHDB (0x004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS (0x0050) /* UHC Root Hub Status */
+#define UHCRHPS1 (0x0054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2 (0x0058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3 (0x005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT (0x0060) /* UHC Status Register */
+#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
+#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
+#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
+
+#define UHCHR (0x0064) /* UHC Reset Register */
+#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
+#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
+#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
+#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
+#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
+#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
+#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
+#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
+
+#define UHCHIE (0x0068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
+#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
+ Interrupt Enable*/
+#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
+
+#define UHCHIT (0x006C) /* UHC Interrupt Test register */
+
#define PXA_UHC_MAX_PORTNUM 3
-#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 )
+struct pxa27x_ohci {
+ /* must be 1st member here for hcd_to_ohci() to work */
+ struct ohci_hcd ohci;
+
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *mmio_base;
+};
-static struct clk *usb_clk;
+#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd)
/*
PMM_NPS_MODE -- PMM Non-power switching mode
@@ -45,30 +118,35 @@ static struct clk *usb_clk;
PMM_PERPORT_MODE -- PMM per port switching mode
Ports are powered individually.
*/
-static int pxa27x_ohci_select_pmm( int mode )
+static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode)
{
- switch ( mode ) {
+ uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+ uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB);
+
+ switch (mode) {
case PMM_NPS_MODE:
- UHCRHDA |= RH_A_NPS;
+ uhcrhda |= RH_A_NPS;
break;
case PMM_GLOBAL_MODE:
- UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
+ uhcrhda &= ~(RH_A_NPS & RH_A_PSM);
break;
case PMM_PERPORT_MODE:
- UHCRHDA &= ~(RH_A_NPS);
- UHCRHDA |= RH_A_PSM;
+ uhcrhda &= ~(RH_A_NPS);
+ uhcrhda |= RH_A_PSM;
/* Set port power control mask bits, only 3 ports. */
- UHCRHDB |= (0x7<<17);
+ uhcrhdb |= (0x7<<17);
break;
default:
printk( KERN_ERR
"Invalid mode %d, set to non-power switch mode.\n",
mode );
- UHCRHDA |= RH_A_NPS;
+ uhcrhda |= RH_A_NPS;
}
+ __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+ __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB);
return 0;
}
@@ -76,57 +154,110 @@ extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
-static int pxa27x_start_hc(struct device *dev)
+static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci,
+ struct pxaohci_platform_data *inf)
+{
+ uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+ uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+
+ if (inf->flags & ENABLE_PORT1)
+ uhchr &= ~UHCHR_SSEP1;
+
+ if (inf->flags & ENABLE_PORT2)
+ uhchr &= ~UHCHR_SSEP2;
+
+ if (inf->flags & ENABLE_PORT3)
+ uhchr &= ~UHCHR_SSEP3;
+
+ if (inf->flags & POWER_CONTROL_LOW)
+ uhchr |= UHCHR_PCPL;
+
+ if (inf->flags & POWER_SENSE_LOW)
+ uhchr |= UHCHR_PSPL;
+
+ if (inf->flags & NO_OC_PROTECTION)
+ uhcrhda |= UHCRHDA_NOCP;
+
+ if (inf->flags & OC_MODE_PERPORT)
+ uhcrhda |= UHCRHDA_OCPM;
+
+ if (inf->power_on_delay) {
+ uhcrhda &= ~UHCRHDA_POTPGT(0xff);
+ uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2);
+ }
+
+ __raw_writel(uhchr, ohci->mmio_base + UHCHR);
+ __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+}
+
+static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
+{
+ uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+
+ __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR);
+ udelay(11);
+ __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
+}
+
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph() do {} while (0)
+#endif
+
+static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
{
int retval = 0;
struct pxaohci_platform_data *inf;
+ uint32_t uhchr;
inf = dev->platform_data;
- clk_enable(usb_clk);
+ clk_enable(ohci->clk);
- UHCHR |= UHCHR_FHR;
- udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ pxa27x_reset_hc(ohci);
+
+ uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
+ __raw_writel(uhchr, ohci->mmio_base + UHCHR);
- UHCHR |= UHCHR_FSBIR;
- while (UHCHR & UHCHR_FSBIR)
+ while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
cpu_relax();
+ pxa27x_setup_hc(ohci, inf);
+
if (inf->init)
retval = inf->init(dev);
if (retval < 0)
return retval;
- UHCHR &= ~UHCHR_SSE;
-
- UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+ uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
+ __raw_writel(uhchr, ohci->mmio_base + UHCHR);
+ __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
/* Clear any OTG Pin Hold */
- if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
- PSSR |= PSSR_OTGPH;
-
+ pxa27x_clear_otgph();
return 0;
}
-static void pxa27x_stop_hc(struct device *dev)
+static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
{
struct pxaohci_platform_data *inf;
+ uint32_t uhccoms;
inf = dev->platform_data;
if (inf->exit)
inf->exit(dev);
- UHCHR |= UHCHR_FHR;
- udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ pxa27x_reset_hc(ohci);
- UHCCOMS |= 1;
+ /* Host Controller Reset */
+ uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01;
+ __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS);
udelay(10);
- clk_disable(usb_clk);
+ clk_disable(ohci->clk);
}
@@ -147,18 +278,22 @@ static void pxa27x_stop_hc(struct device *dev)
*/
int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
{
- int retval;
+ int retval, irq;
struct usb_hcd *hcd;
struct pxaohci_platform_data *inf;
+ struct pxa27x_ohci *ohci;
+ struct resource *r;
+ struct clk *usb_clk;
inf = pdev->dev.platform_data;
if (!inf)
return -ENODEV;
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug ("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ pr_err("no resource of IORESOURCE_IRQ");
+ return -ENXIO;
}
usb_clk = clk_get(&pdev->dev, "USBCLK");
@@ -168,8 +303,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
if (!hcd)
return -ENOMEM;
- hcd->rsrc_start = pdev->resource[0].start;
- hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ pr_err("no resource of IORESOURCE_MEM");
+ retval = -ENXIO;
+ goto err1;
+ }
+
+ hcd->rsrc_start = r->start;
+ hcd->rsrc_len = resource_size(r);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed");
@@ -184,24 +327,30 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
goto err2;
}
- if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) {
+ /* initialize "struct pxa27x_ohci" */
+ ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd);
+ ohci->dev = &pdev->dev;
+ ohci->clk = usb_clk;
+ ohci->mmio_base = (void __iomem *)hcd->regs;
+
+ if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) {
pr_debug("pxa27x_start_hc failed");
goto err3;
}
/* Select Power Management Mode */
- pxa27x_ohci_select_pmm(inf->port_mode);
+ pxa27x_ohci_select_pmm(ohci, inf->port_mode);
if (inf->power_budget)
hcd->power_budget = inf->power_budget;
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval == 0)
return retval;
- pxa27x_stop_hc(&pdev->dev);
+ pxa27x_stop_hc(ohci, &pdev->dev);
err3:
iounmap(hcd->regs);
err2:
@@ -228,12 +377,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
*/
void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
+ struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+
usb_remove_hcd(hcd);
- pxa27x_stop_hc(&pdev->dev);
+ pxa27x_stop_hc(ohci, &pdev->dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- clk_put(usb_clk);
+ clk_put(ohci->clk);
}
/*-------------------------------------------------------------------------*/
@@ -266,7 +417,7 @@ ohci_pxa27x_start (struct usb_hcd *hcd)
static const struct hc_driver ohci_pxa27x_hc_driver = {
.description = hcd_name,
.product_desc = "PXA27x OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
+ .hcd_priv_size = sizeof(struct pxa27x_ohci),
/*
* generic hardware linkage
@@ -330,13 +481,13 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
- if (time_before(jiffies, ohci->next_statechange))
+ if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
- ohci->next_statechange = jiffies;
+ ohci->ohci.next_statechange = jiffies;
- pxa27x_stop_hc(&pdev->dev);
+ pxa27x_stop_hc(ohci, &pdev->dev);
hcd->state = HC_STATE_SUSPENDED;
return 0;
@@ -345,14 +496,14 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_
static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
int status;
- if (time_before(jiffies, ohci->next_statechange))
+ if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
- ohci->next_statechange = jiffies;
+ ohci->ohci.next_statechange = jiffies;
- if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
+ if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
return status;
ohci_finish_controller_resume(hcd);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 70d135e0cc4..d85a74c64b5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -172,11 +172,6 @@ config FB_DEFERRED_IO
bool
depends on FB
-config FB_METRONOME
- tristate
- depends on FB
- depends on FB_DEFERRED_IO
-
config FB_HECUBA
tristate
depends on FB
@@ -1974,19 +1969,6 @@ config FB_XILINX
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
-config FB_AM200EPD
- tristate "AM-200 E-Ink EPD devkit support"
- depends on FB && ARCH_PXA && MMU
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select FB_METRONOME
- help
- This enables support for the Metronome display controller used on
- the E-Ink AM-200 EPD devkit.
-
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
@@ -2041,6 +2023,19 @@ config XEN_FBDEV_FRONTEND
frame buffer driver. It communicates with a back-end
in another domain.
+config FB_METRONOME
+ tristate "E-Ink Metronome/8track controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Metronome
+ controller. The pre-release name for this device was 8track
+ and could also have been called by some vendors as PVI-nnnn.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a6b55297a7f..ad0330bf9be 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
# Hardware specific drivers go first
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
-obj-$(CONFIG_FB_AM200EPD) += am200epd.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
deleted file mode 100644
index 0c35b8b0160..00000000000
--- a/drivers/video/am200epd.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * linux/drivers/video/am200epd.c -- Platform device for AM200 EPD kit
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
- *
- * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
- *
- * This driver is written to be used with the Metronome display controller.
- * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
- * Vizplex EPD on a Gumstix board using the Lyre interface board.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/list.h>
-#include <linux/uaccess.h>
-#include <linux/irq.h>
-
-#include <video/metronomefb.h>
-
-#include <mach/pxa-regs.h>
-
-/* register offsets for gpio control */
-#define LED_GPIO_PIN 51
-#define STDBY_GPIO_PIN 48
-#define RST_GPIO_PIN 49
-#define RDY_GPIO_PIN 32
-#define ERR_GPIO_PIN 17
-#define PCBPWR_GPIO_PIN 16
-
-#define AF_SEL_GPIO_N 0x3
-#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
-#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
-#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
-#define GPDR1_OFFSET(pin) (pin - 32)
-#define GPCR1_OFFSET(pin) (pin - 32)
-#define GPSR1_OFFSET(pin) (pin - 32)
-#define GPCR0_OFFSET(pin) (pin)
-#define GPSR0_OFFSET(pin) (pin)
-
-static void am200_set_gpio_output(int pin, int val)
-{
- u8 index;
-
- index = pin >> 4;
-
- switch (index) {
- case 1:
- if (val)
- GPSR0 |= (1 << GPSR0_OFFSET(pin));
- else
- GPCR0 |= (1 << GPCR0_OFFSET(pin));
- break;
- case 2:
- break;
- case 3:
- if (val)
- GPSR1 |= (1 << GPSR1_OFFSET(pin));
- else
- GPCR1 |= (1 << GPCR1_OFFSET(pin));
- break;
- default:
- printk(KERN_ERR "unimplemented\n");
- }
-}
-
-static void __devinit am200_init_gpio_pin(int pin, int dir)
-{
- u8 index;
- /* dir 0 is output, 1 is input
- - do 2 things here:
- - set gpio alternate function to standard gpio
- - set gpio direction to input or output */
-
- index = pin >> 4;
- switch (index) {
- case 1:
- GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
-
- if (dir)
- GPDR0 &= ~(1 << pin);
- else
- GPDR0 |= (1 << pin);
- break;
- case 2:
- GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
-
- if (dir)
- GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
- else
- GPDR1 |= (1 << GPDR1_OFFSET(pin));
- break;
- case 3:
- GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
-
- if (dir)
- GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
- else
- GPDR1 |= (1 << GPDR1_OFFSET(pin));
- break;
- default:
- printk(KERN_ERR "unimplemented\n");
- }
-}
-
-static void am200_init_gpio_regs(struct metronomefb_par *par)
-{
- am200_init_gpio_pin(LED_GPIO_PIN, 0);
- am200_set_gpio_output(LED_GPIO_PIN, 0);
-
- am200_init_gpio_pin(STDBY_GPIO_PIN, 0);
- am200_set_gpio_output(STDBY_GPIO_PIN, 0);
-
- am200_init_gpio_pin(RST_GPIO_PIN, 0);
- am200_set_gpio_output(RST_GPIO_PIN, 0);
-
- am200_init_gpio_pin(RDY_GPIO_PIN, 1);
-
- am200_init_gpio_pin(ERR_GPIO_PIN, 1);
-
- am200_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
- am200_set_gpio_output(PCBPWR_GPIO_PIN, 0);
-}
-
-static void am200_disable_lcd_controller(struct metronomefb_par *par)
-{
- LCSR = 0xffffffff; /* Clear LCD Status Register */
- LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
-
- /* we reset and just wait for things to settle */
- msleep(200);
-}
-
-static void am200_enable_lcd_controller(struct metronomefb_par *par)
-{
- LCSR = 0xffffffff;
- FDADR0 = par->metromem_desc_dma;
- LCCR0 |= LCCR0_ENB;
-}
-
-static void am200_init_lcdc_regs(struct metronomefb_par *par)
-{
- /* here we do:
- - disable the lcd controller
- - setup lcd control registers
- - setup dma descriptor
- - reenable lcd controller
- */
-
- /* disable the lcd controller */
- am200_disable_lcd_controller(par);
-
- /* setup lcd control registers */
- LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
- | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
-
- LCCR1 = (par->info->var.xres/2 - 1) /* pixels per line */
- | (27 << 10) /* hsync pulse width - 1 */
- | (33 << 16) /* eol pixel count */
- | (33 << 24); /* bol pixel count */
-
- LCCR2 = (par->info->var.yres - 1) /* lines per panel */
- | (24 << 10) /* vsync pulse width - 1 */
- | (2 << 16) /* eof pixel count */
- | (0 << 24); /* bof pixel count */
-
- LCCR3 = 2 /* pixel clock divisor */
- | (24 << 8) /* AC Bias pin freq */
- | LCCR3_16BPP /* BPP */
- | LCCR3_PCP; /* PCP falling edge */
-
-}
-
-static void am200_post_dma_setup(struct metronomefb_par *par)
-{
- par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
- par->metromem_desc->mFSADR0 = par->metromem_dma;
- par->metromem_desc->mFIDR0 = 0;
- par->metromem_desc->mLDCMD0 = par->info->var.xres
- * par->info->var.yres;
- am200_enable_lcd_controller(par);
-}
-
-static void am200_free_irq(struct fb_info *info)
-{
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
-}
-
-static irqreturn_t am200_handle_irq(int irq, void *dev_id)
-{
- struct fb_info *info = dev_id;
- struct metronomefb_par *par = info->par;
-
- wake_up_interruptible(&par->waitq);
- return IRQ_HANDLED;
-}
-
-static int am200_setup_irq(struct fb_info *info)
-{
- int retval;
-
- retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
- IRQF_DISABLED, "AM200", info);
- if (retval) {
- printk(KERN_ERR "am200epd: request_irq failed: %d\n", retval);
- return retval;
- }
-
- return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING);
-}
-
-static void am200_set_rst(struct metronomefb_par *par, int state)
-{
- am200_set_gpio_output(RST_GPIO_PIN, state);
-}
-
-static void am200_set_stdby(struct metronomefb_par *par, int state)
-{
- am200_set_gpio_output(STDBY_GPIO_PIN, state);
-}
-
-static int am200_wait_event(struct metronomefb_par *par)
-{
- return wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-}
-
-static int am200_wait_event_intr(struct metronomefb_par *par)
-{
- return wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-}
-
-static struct metronome_board am200_board = {
- .owner = THIS_MODULE,
- .free_irq = am200_free_irq,
- .setup_irq = am200_setup_irq,
- .init_gpio_regs = am200_init_gpio_regs,
- .init_lcdc_regs = am200_init_lcdc_regs,
- .post_dma_setup = am200_post_dma_setup,
- .set_rst = am200_set_rst,
- .set_stdby = am200_set_stdby,
- .met_wait_event = am200_wait_event,
- .met_wait_event_intr = am200_wait_event_intr,
-};
-
-static struct platform_device *am200_device;
-
-static int __init am200_init(void)
-{
- int ret;
-
- /* request our platform independent driver */
- request_module("metronomefb");
-
- am200_device = platform_device_alloc("metronomefb", -1);
- if (!am200_device)
- return -ENOMEM;
-
- platform_device_add_data(am200_device, &am200_board,
- sizeof(am200_board));
-
- /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
- ret = platform_device_add(am200_device);
-
- if (ret)
- platform_device_put(am200_device);
-
- return ret;
-}
-
-static void __exit am200_exit(void)
-{
- platform_device_unregister(am200_device);
-}
-
-module_init(am200_init);
-module_exit(am200_exit);
-
-MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 75dac578104..d38fd521742 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -408,6 +408,10 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
var->red.offset = 11;
var->blue.offset = 0;
var->green.length = 6;
+ } else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) {
+ var->red.offset = 10;
+ var->blue.offset = 0;
+ var->green.length = 5;
} else {
/* BGR:555 mode */
var->red.offset = 0;
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 452b770d8cc..c72a1356295 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -24,6 +24,13 @@ config LCD_CLASS_DEVICE
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
+config LCD_CORGI
+ tristate "LCD Panel support for SHARP corgi/spitz model"
+ depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
+ help
+ Say y here to support the LCD panels usually found on SHARP
+ corgi (C7x0) and spitz (Cxx00) models.
+
config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel"
depends on LCD_CLASS_DEVICE && SPI_MASTER
@@ -44,6 +51,14 @@ config LCD_ILI9320
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
+config LCD_TDO24M
+ tristate "Toppoly TDO24M LCD Panels support"
+ depends on LCD_CLASS_DEVICE && SPI_MASTER
+ default n
+ help
+ If you have a Toppoly TDO24M series LCD panel, say y here to
+ include the support for it.
+
config LCD_VGG2432A4
tristate "VGG2432A4 LCM device support"
depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b405aace803..3ec551eb472 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -1,10 +1,12 @@
# Backlight & LCD drivers
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
+obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
+obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
new file mode 100644
index 00000000000..2afd47eefe7
--- /dev/null
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -0,0 +1,641 @@
+/*
+ * LCD/Backlight Driver for Sharp Zaurus Handhelds (various models)
+ *
+ * Copyright (c) 2004-2006 Richard Purdie
+ *
+ * Based on Sharp's 2.4 Backlight Driver
+ *
+ * Copyright (c) 2008 Marvell International Ltd.
+ * Converted to SPI device based LCD/Backlight device driver
+ * by Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/corgi_lcd.h>
+#include <asm/mach/sharpsl_param.h>
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+/* Register Addresses */
+#define RESCTL_ADRS 0x00
+#define PHACTRL_ADRS 0x01
+#define DUTYCTRL_ADRS 0x02
+#define POWERREG0_ADRS 0x03
+#define POWERREG1_ADRS 0x04
+#define GPOR3_ADRS 0x05
+#define PICTRL_ADRS 0x06
+#define POLCTRL_ADRS 0x07
+
+/* Register Bit Definitions */
+#define RESCTL_QVGA 0x01
+#define RESCTL_VGA 0x00
+
+#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
+#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
+#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
+
+#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
+#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
+#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
+
+#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
+#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
+#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
+#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
+#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
+
+#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
+#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
+#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
+
+#define PICTRL_INIT_STATE 0x01
+#define PICTRL_INIOFF 0x02
+#define PICTRL_POWER_DOWN 0x04
+#define PICTRL_COM_SIGNAL_OFF 0x08
+#define PICTRL_DAC_SIGNAL_OFF 0x10
+
+#define POLCTRL_SYNC_POL_FALL 0x01
+#define POLCTRL_EN_POL_FALL 0x02
+#define POLCTRL_DATA_POL_FALL 0x04
+#define POLCTRL_SYNC_ACT_H 0x08
+#define POLCTRL_EN_ACT_L 0x10
+
+#define POLCTRL_SYNC_POL_RISE 0x00
+#define POLCTRL_EN_POL_RISE 0x00
+#define POLCTRL_DATA_POL_RISE 0x00
+#define POLCTRL_SYNC_ACT_L 0x00
+#define POLCTRL_EN_ACT_H 0x00
+
+#define PHACTRL_PHASE_MANUAL 0x01
+#define DEFAULT_PHAD_QVGA (9)
+#define DEFAULT_COMADJ (125)
+
+struct corgi_lcd {
+ struct spi_device *spi_dev;
+ struct lcd_device *lcd_dev;
+ struct backlight_device *bl_dev;
+
+ int limit_mask;
+ int intensity;
+ int power;
+ int mode;
+ char buf[2];
+
+ int gpio_backlight_on;
+ int gpio_backlight_cont;
+ int gpio_backlight_cont_inverted;
+
+ void (*kick_battery)(void);
+};
+
+static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val);
+
+static struct corgi_lcd *the_corgi_lcd;
+static unsigned long corgibl_flags;
+#define CORGIBL_SUSPENDED 0x01
+#define CORGIBL_BATTLOW 0x02
+
+/*
+ * This is only a psuedo I2C interface. We can't use the standard kernel
+ * routines as the interface is write only. We just assume the data is acked...
+ */
+static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
+{
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data);
+ udelay(10);
+}
+
+static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data)
+{
+ lcdtg_ssp_i2c_send(lcd, data);
+ lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK);
+ lcdtg_ssp_i2c_send(lcd, data);
+}
+
+static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base)
+{
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
+ lcdtg_ssp_i2c_send(lcd, base);
+}
+
+static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base)
+{
+ lcdtg_ssp_i2c_send(lcd, base);
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+}
+
+static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd,
+ uint8_t base, uint8_t data)
+{
+ int i;
+ for (i = 0; i < 8; i++) {
+ if (data & 0x80)
+ lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT);
+ else
+ lcdtg_i2c_send_bit(lcd, base);
+ data <<= 1;
+ }
+}
+
+static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base)
+{
+ lcdtg_i2c_send_bit(lcd, base);
+}
+
+static void lcdtg_set_common_voltage(struct corgi_lcd *lcd,
+ uint8_t base_data, uint8_t data)
+{
+ /* Set Common Voltage to M62332FP via I2C */
+ lcdtg_i2c_send_start(lcd, base_data);
+ lcdtg_i2c_send_byte(lcd, base_data, 0x9c);
+ lcdtg_i2c_wait_ack(lcd, base_data);
+ lcdtg_i2c_send_byte(lcd, base_data, 0x00);
+ lcdtg_i2c_wait_ack(lcd, base_data);
+ lcdtg_i2c_send_byte(lcd, base_data, data);
+ lcdtg_i2c_wait_ack(lcd, base_data);
+ lcdtg_i2c_send_stop(lcd, base_data);
+}
+
+static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
+{
+ struct spi_message msg;
+ struct spi_transfer xfer = {
+ .len = 1,
+ .cs_change = 1,
+ .tx_buf = lcd->buf,
+ };
+
+ lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(lcd->spi_dev, &msg);
+}
+
+/* Set Phase Adjust */
+static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode)
+{
+ int adj;
+
+ switch(mode) {
+ case CORGI_LCD_MODE_VGA:
+ /* Setting for VGA */
+ adj = sharpsl_param.phadadj;
+ adj = (adj < 0) ? PHACTRL_PHASE_MANUAL :
+ PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1);
+ break;
+ case CORGI_LCD_MODE_QVGA:
+ default:
+ /* Setting for QVGA */
+ adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
+ break;
+ }
+
+ corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj);
+}
+
+static void corgi_lcd_power_on(struct corgi_lcd *lcd)
+{
+ int comadj;
+
+ /* Initialize Internal Logic & Port */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+ PICTRL_POWER_DOWN | PICTRL_INIOFF |
+ PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF |
+ PICTRL_DAC_SIGNAL_OFF);
+
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
+ POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+ /* VDD(+8V), SVSS(-4V) ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+ mdelay(3);
+
+ /* DAC ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+ POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ /* INIB = H, INI = L */
+ /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+ PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
+
+ /* Set Common Voltage */
+ comadj = sharpsl_param.comadj;
+ if (comadj < 0)
+ comadj = DEFAULT_COMADJ;
+
+ lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
+ POWER0_VCC5_OFF, comadj);
+
+ /* VCC5 ON, DAC ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+ POWER0_COM_OFF | POWER0_VCC5_ON);
+
+ /* GVSS(-8V) ON, VDD ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+ mdelay(2);
+
+ /* COM SIGNAL ON (PICTL[3] = L) */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE);
+
+ /* COM ON, DAC ON, VCC5_ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+ POWER0_COM_ON | POWER0_VCC5_ON);
+
+ /* VW ON, GVSS ON, VDD ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+ /* Signals output enable */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0);
+
+ /* Set Phase Adjust */
+ lcdtg_set_phadadj(lcd, lcd->mode);
+
+ /* Initialize for Input Signals from ATI */
+ corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS,
+ POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
+ POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L |
+ POLCTRL_EN_ACT_H);
+ udelay(1000);
+
+ switch (lcd->mode) {
+ case CORGI_LCD_MODE_VGA:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
+ break;
+ case CORGI_LCD_MODE_QVGA:
+ default:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
+ break;
+ }
+}
+
+static void corgi_lcd_power_off(struct corgi_lcd *lcd)
+{
+ /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
+ msleep(34);
+
+ /* (1)VW OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+ /* (2)COM OFF */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
+
+ /* (3)Set Common Voltage Bias 0V */
+ lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
+ POWER0_VCC5_ON, 0);
+
+ /* (4)GVSS OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+
+ /* (5)VCC5 OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ /* (6)Set PDWN, INIOFF, DACOFF */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+ PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
+ PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
+
+ /* (7)DAC OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ /* (8)VDD OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+}
+
+static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+ int mode = CORGI_LCD_MODE_QVGA;
+
+ if (m->xres == 640 || m->xres == 480)
+ mode = CORGI_LCD_MODE_VGA;
+
+ if (lcd->mode == mode)
+ return 0;
+
+ lcdtg_set_phadadj(lcd, mode);
+
+ switch (mode) {
+ case CORGI_LCD_MODE_VGA:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
+ break;
+ case CORGI_LCD_MODE_QVGA:
+ default:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
+ break;
+ }
+
+ lcd->mode = mode;
+ return 0;
+}
+
+static int corgi_lcd_set_power(struct lcd_device *ld, int power)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ corgi_lcd_power_on(lcd);
+
+ if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ corgi_lcd_power_off(lcd);
+
+ lcd->power = power;
+ return 0;
+}
+
+static int corgi_lcd_get_power(struct lcd_device *ld)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+
+ return lcd->power;
+}
+
+static struct lcd_ops corgi_lcd_ops = {
+ .get_power = corgi_lcd_get_power,
+ .set_power = corgi_lcd_set_power,
+ .set_mode = corgi_lcd_set_mode,
+};
+
+static int corgi_bl_get_intensity(struct backlight_device *bd)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
+
+ return lcd->intensity;
+}
+
+static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
+{
+ int cont;
+
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
+
+ /* Bit 5 via GPIO_BACKLIGHT_CONT */
+ cont = !!(intensity & 0x20) ^ lcd->gpio_backlight_cont_inverted;
+
+ if (gpio_is_valid(lcd->gpio_backlight_cont))
+ gpio_set_value(lcd->gpio_backlight_cont, cont);
+
+ if (gpio_is_valid(lcd->gpio_backlight_on))
+ gpio_set_value(lcd->gpio_backlight_on, intensity);
+
+ if (lcd->kick_battery)
+ lcd->kick_battery();
+
+ lcd->intensity = intensity;
+ return 0;
+}
+
+static int corgi_bl_update_status(struct backlight_device *bd)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
+ int intensity = bd->props.brightness;
+
+ if (bd->props.power != FB_BLANK_UNBLANK)
+ intensity = 0;
+
+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+
+ if (corgibl_flags & CORGIBL_SUSPENDED)
+ intensity = 0;
+ if (corgibl_flags & CORGIBL_BATTLOW)
+ intensity &= lcd->limit_mask;
+
+ return corgi_bl_set_intensity(lcd, intensity);
+}
+
+void corgibl_limit_intensity(int limit)
+{
+ if (limit)
+ corgibl_flags |= CORGIBL_BATTLOW;
+ else
+ corgibl_flags &= ~CORGIBL_BATTLOW;
+
+ backlight_update_status(the_corgi_lcd->bl_dev);
+}
+EXPORT_SYMBOL(corgibl_limit_intensity);
+
+static struct backlight_ops corgi_bl_ops = {
+ .get_brightness = corgi_bl_get_intensity,
+ .update_status = corgi_bl_update_status,
+};
+
+#ifdef CONFIG_PM
+static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+ corgibl_flags |= CORGIBL_SUSPENDED;
+ corgi_bl_set_intensity(lcd, 0);
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
+ return 0;
+}
+
+static int corgi_lcd_resume(struct spi_device *spi)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+ corgibl_flags &= ~CORGIBL_SUSPENDED;
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
+ backlight_update_status(lcd->bl_dev);
+ return 0;
+}
+#else
+#define corgi_lcd_suspend NULL
+#define corgi_lcd_resume NULL
+#endif
+
+static int setup_gpio_backlight(struct corgi_lcd *lcd,
+ struct corgi_lcd_platform_data *pdata)
+{
+ struct spi_device *spi = lcd->spi_dev;
+ int err;
+
+ lcd->gpio_backlight_on = -1;
+ lcd->gpio_backlight_cont = -1;
+
+ if (gpio_is_valid(pdata->gpio_backlight_on)) {
+ err = gpio_request(pdata->gpio_backlight_on, "BL_ON");
+ if (err) {
+ dev_err(&spi->dev, "failed to request GPIO%d for "
+ "backlight_on\n", pdata->gpio_backlight_on);
+ return err;
+ }
+
+ lcd->gpio_backlight_on = pdata->gpio_backlight_on;
+ gpio_direction_output(lcd->gpio_backlight_on, 0);
+ }
+
+ if (gpio_is_valid(pdata->gpio_backlight_cont)) {
+ err = gpio_request(pdata->gpio_backlight_cont, "BL_CONT");
+ if (err) {
+ dev_err(&spi->dev, "failed to request GPIO%d for "
+ "backlight_cont\n", pdata->gpio_backlight_cont);
+ goto err_free_backlight_on;
+ }
+
+ lcd->gpio_backlight_cont = pdata->gpio_backlight_cont;
+
+ /* spitz and akita use both GPIOs for backlight, and
+ * have inverted polarity of GPIO_BACKLIGHT_CONT
+ */
+ if (gpio_is_valid(lcd->gpio_backlight_on)) {
+ lcd->gpio_backlight_cont_inverted = 1;
+ gpio_direction_output(lcd->gpio_backlight_cont, 1);
+ } else {
+ lcd->gpio_backlight_cont_inverted = 0;
+ gpio_direction_output(lcd->gpio_backlight_cont, 0);
+ }
+ }
+ return 0;
+
+err_free_backlight_on:
+ if (gpio_is_valid(lcd->gpio_backlight_on))
+ gpio_free(lcd->gpio_backlight_on);
+ return err;
+}
+
+static int __devinit corgi_lcd_probe(struct spi_device *spi)
+{
+ struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
+ struct corgi_lcd *lcd;
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&spi->dev, "platform data not available\n");
+ return -EINVAL;
+ }
+
+ lcd = kzalloc(sizeof(struct corgi_lcd), GFP_KERNEL);
+ if (!lcd) {
+ dev_err(&spi->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ lcd->spi_dev = spi;
+
+ lcd->lcd_dev = lcd_device_register("corgi_lcd", &spi->dev,
+ lcd, &corgi_lcd_ops);
+ if (IS_ERR(lcd->lcd_dev)) {
+ ret = PTR_ERR(lcd->lcd_dev);
+ goto err_free_lcd;
+ }
+ lcd->power = FB_BLANK_POWERDOWN;
+ lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
+
+ lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev,
+ lcd, &corgi_bl_ops);
+ if (IS_ERR(lcd->bl_dev)) {
+ ret = PTR_ERR(lcd->bl_dev);
+ goto err_unregister_lcd;
+ }
+ lcd->bl_dev->props.max_brightness = pdata->max_intensity;
+ lcd->bl_dev->props.brightness = pdata->default_intensity;
+ lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+ ret = setup_gpio_backlight(lcd, pdata);
+ if (ret)
+ goto err_unregister_bl;
+
+ lcd->kick_battery = pdata->kick_battery;
+
+ dev_set_drvdata(&spi->dev, lcd);
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
+ backlight_update_status(lcd->bl_dev);
+
+ lcd->limit_mask = pdata->limit_mask;
+ the_corgi_lcd = lcd;
+ return 0;
+
+err_unregister_bl:
+ backlight_device_unregister(lcd->bl_dev);
+err_unregister_lcd:
+ lcd_device_unregister(lcd->lcd_dev);
+err_free_lcd:
+ kfree(lcd);
+ return ret;
+}
+
+static int __devexit corgi_lcd_remove(struct spi_device *spi)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+ lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+ lcd->bl_dev->props.brightness = 0;
+ backlight_update_status(lcd->bl_dev);
+ backlight_device_unregister(lcd->bl_dev);
+
+ if (gpio_is_valid(lcd->gpio_backlight_on))
+ gpio_free(lcd->gpio_backlight_on);
+
+ if (gpio_is_valid(lcd->gpio_backlight_cont))
+ gpio_free(lcd->gpio_backlight_cont);
+
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
+ lcd_device_unregister(lcd->lcd_dev);
+ kfree(lcd);
+
+ return 0;
+}
+
+static struct spi_driver corgi_lcd_driver = {
+ .driver = {
+ .name = "corgi-lcd",
+ .owner = THIS_MODULE,
+ },
+ .probe = corgi_lcd_probe,
+ .remove = __devexit_p(corgi_lcd_remove),
+ .suspend = corgi_lcd_suspend,
+ .resume = corgi_lcd_resume,
+};
+
+static int __init corgi_lcd_init(void)
+{
+ return spi_register_driver(&corgi_lcd_driver);
+}
+module_init(corgi_lcd_init);
+
+static void __exit corgi_lcd_exit(void)
+{
+ spi_unregister_driver(&corgi_lcd_driver);
+}
+module_exit(corgi_lcd_exit);
+
+MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index b15b2b84a6f..8e1731d3b22 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -27,14 +27,26 @@ static int fb_notifier_callback(struct notifier_block *self,
struct fb_event *evdata = data;
/* If we aren't interested in this event, skip it immediately ... */
- if (event != FB_EVENT_BLANK)
+ switch (event) {
+ case FB_EVENT_BLANK:
+ case FB_EVENT_MODE_CHANGE:
+ case FB_EVENT_MODE_CHANGE_ALL:
+ break;
+ default:
return 0;
+ }
ld = container_of(self, struct lcd_device, fb_notif);
+ if (!ld->ops)
+ return 0;
+
mutex_lock(&ld->ops_lock);
- if (ld->ops)
- if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info))
+ if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
+ if (event == FB_EVENT_BLANK)
ld->ops->set_power(ld, *(int *)evdata->data);
+ else
+ ld->ops->set_mode(ld, evdata->data);
+ }
mutex_unlock(&ld->ops_lock);
return 0;
}
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
new file mode 100644
index 00000000000..8427669162e
--- /dev/null
+++ b/drivers/video/backlight/tdo24m.c
@@ -0,0 +1,396 @@
+/*
+ * tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+#define TDO24M_SPI_BUFF_SIZE (4)
+#define MODE_QVGA 0
+#define MODE_VGA 1
+
+struct tdo24m {
+ struct spi_device *spi_dev;
+ struct lcd_device *lcd_dev;
+
+ struct spi_message msg;
+ struct spi_transfer xfer;
+ uint8_t *buf;
+
+ int power;
+ int mode;
+};
+
+/* use bit 30, 31 as the indicator of command parameter number */
+#define CMD0(x) ((0 << 30) | (x))
+#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1))
+#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\
+ ((x1) << 9) | 0x100 | (x2))
+#define CMD_NULL (-1)
+
+static uint32_t lcd_panel_reset[] = {
+ CMD0(0x1), /* reset */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+ CMD_NULL,
+};
+
+static uint32_t lcd_panel_on[] = {
+ CMD0(0x29), /* Display ON */
+ CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
+ CMD0(0x11), /* Sleep out */
+ CMD1(0xB0, 0x16), /* Wake */
+ CMD_NULL,
+};
+
+static uint32_t lcd_panel_off[] = {
+ CMD0(0x28), /* Display OFF */
+ CMD2(0xB8, 0x80, 0x02), /* Output Control */
+ CMD0(0x10), /* Sleep in */
+ CMD1(0xB0, 0x00), /* Deep stand by in */
+ CMD_NULL,
+};
+
+static uint32_t lcd_vga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x80),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x00),
+ CMD_NULL,
+};
+
+static uint32_t lcd_qvga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x81),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x22),
+ CMD_NULL,
+};
+
+static uint32_t lcd_vga_transfer[] = {
+ CMD1(0xcf, 0x02), /* Blanking period control (1) */
+ CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd1, 0x01), /* CKV timing control on/off */
+ CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
+ CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
+ CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
+ CMD1(0xd5, 0x14), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+ CMD_NULL,
+};
+
+static uint32_t lcd_qvga_transfer[] = {
+ CMD1(0xd6, 0x02), /* Blanking period control (1) */
+ CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd8, 0x01), /* CKV timing control on/off */
+ CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
+ CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
+ CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
+ CMD1(0xe0, 0x0a), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+ CMD_NULL,
+};
+
+static uint32_t lcd_panel_config[] = {
+ CMD2(0xb8, 0xff, 0xf9), /* Output control */
+ CMD0(0x11), /* sleep out */
+ CMD1(0xba, 0x01), /* Display mode (1) */
+ CMD1(0xbb, 0x00), /* Display mode (2) */
+ CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
+ CMD1(0xbf, 0x10), /* Drive system change control */
+ CMD1(0xb1, 0x56), /* Booster operation setup */
+ CMD1(0xb2, 0x33), /* Booster mode setup */
+ CMD1(0xb3, 0x11), /* Booster frequency setup */
+ CMD1(0xb4, 0x02), /* Op amp/system clock */
+ CMD1(0xb5, 0x35), /* VCS voltage */
+ CMD1(0xb6, 0x40), /* VCOM voltage */
+ CMD1(0xb7, 0x03), /* External display signal */
+ CMD1(0xbd, 0x00), /* ASW slew rate */
+ CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
+ CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
+ CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
+ CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
+ CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
+ CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
+ CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
+ CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
+ CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
+ CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
+ CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
+ CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
+ CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
+ CMD_NULL,
+};
+
+static int tdo24m_writes(struct tdo24m *lcd, uint32_t *array)
+{
+ struct spi_transfer *x = &lcd->xfer;
+ uint32_t data, *p = array;
+ int nparams, err = 0;
+
+ for (; *p != CMD_NULL; p++) {
+
+ nparams = (*p >> 30) & 0x3;
+
+ data = *p << (7 - nparams);
+ switch (nparams) {
+ case 0:
+ lcd->buf[0] = (data >> 8) & 0xff;
+ lcd->buf[1] = data & 0xff;
+ break;
+ case 1:
+ lcd->buf[0] = (data >> 16) & 0xff;
+ lcd->buf[1] = (data >> 8) & 0xff;
+ lcd->buf[2] = data & 0xff;
+ break;
+ case 2:
+ lcd->buf[0] = (data >> 24) & 0xff;
+ lcd->buf[1] = (data >> 16) & 0xff;
+ lcd->buf[2] = (data >> 8) & 0xff;
+ lcd->buf[3] = data & 0xff;
+ break;
+ default:
+ continue;
+ }
+ x->len = nparams + 2;
+ err = spi_sync(lcd->spi_dev, &lcd->msg);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
+{
+ switch (mode) {
+ case MODE_VGA:
+ tdo24m_writes(lcd, lcd_vga_pass_through);
+ tdo24m_writes(lcd, lcd_panel_config);
+ tdo24m_writes(lcd, lcd_vga_transfer);
+ break;
+ case MODE_QVGA:
+ tdo24m_writes(lcd, lcd_qvga_pass_through);
+ tdo24m_writes(lcd, lcd_panel_config);
+ tdo24m_writes(lcd, lcd_qvga_transfer);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ lcd->mode = mode;
+ return 0;
+}
+
+static int tdo24m_power_on(struct tdo24m *lcd)
+{
+ int err;
+
+ err = tdo24m_writes(lcd, lcd_panel_on);
+ if (err)
+ goto out;
+
+ err = tdo24m_writes(lcd, lcd_panel_reset);
+ if (err)
+ goto out;
+
+ err = tdo24m_adj_mode(lcd, lcd->mode);
+out:
+ return err;
+}
+
+static int tdo24m_power_off(struct tdo24m *lcd)
+{
+ return tdo24m_writes(lcd, lcd_panel_off);
+}
+
+static int tdo24m_power(struct tdo24m *lcd, int power)
+{
+ int ret = 0;
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ ret = tdo24m_power_on(lcd);
+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ ret = tdo24m_power_off(lcd);
+
+ if (!ret)
+ lcd->power = power;
+
+ return ret;
+}
+
+
+static int tdo24m_set_power(struct lcd_device *ld, int power)
+{
+ struct tdo24m *lcd = lcd_get_data(ld);
+ return tdo24m_power(lcd, power);
+}
+
+static int tdo24m_get_power(struct lcd_device *ld)
+{
+ struct tdo24m *lcd = lcd_get_data(ld);
+ return lcd->power;
+}
+
+static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+ struct tdo24m *lcd = lcd_get_data(ld);
+ int mode = MODE_QVGA;
+
+ if (m->xres == 640 || m->xres == 480)
+ mode = MODE_VGA;
+
+ if (lcd->mode == mode)
+ return 0;
+
+ return tdo24m_adj_mode(lcd, mode);
+}
+
+static struct lcd_ops tdo24m_ops = {
+ .get_power = tdo24m_get_power,
+ .set_power = tdo24m_set_power,
+ .set_mode = tdo24m_set_mode,
+};
+
+static int __devinit tdo24m_probe(struct spi_device *spi)
+{
+ struct tdo24m *lcd;
+ struct spi_message *m;
+ struct spi_transfer *x;
+ int err;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_3;
+ err = spi_setup(spi);
+ if (err)
+ return err;
+
+ lcd = kzalloc(sizeof(struct tdo24m), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ lcd->spi_dev = spi;
+ lcd->power = FB_BLANK_POWERDOWN;
+ lcd->mode = MODE_VGA; /* default to VGA */
+
+ lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
+ if (lcd->buf == NULL) {
+ kfree(lcd);
+ return -ENOMEM;
+ }
+
+ m = &lcd->msg;
+ x = &lcd->xfer;
+
+ spi_message_init(m);
+
+ x->tx_buf = &lcd->buf[0];
+ spi_message_add_tail(x, m);
+
+ lcd->lcd_dev = lcd_device_register("tdo24m", &spi->dev,
+ lcd, &tdo24m_ops);
+ if (IS_ERR(lcd->lcd_dev)) {
+ err = PTR_ERR(lcd->lcd_dev);
+ goto out_free;
+ }
+
+ dev_set_drvdata(&spi->dev, lcd);
+ err = tdo24m_power(lcd, FB_BLANK_UNBLANK);
+ if (err)
+ goto out_unregister;
+
+ return 0;
+
+out_unregister:
+ lcd_device_unregister(lcd->lcd_dev);
+out_free:
+ kfree(lcd->buf);
+ kfree(lcd);
+ return err;
+}
+
+static int __devexit tdo24m_remove(struct spi_device *spi)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ tdo24m_power(lcd, FB_BLANK_POWERDOWN);
+ lcd_device_unregister(lcd->lcd_dev);
+ kfree(lcd->buf);
+ kfree(lcd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tdo24m_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ return tdo24m_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static int tdo24m_resume(struct spi_device *spi)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ return tdo24m_power(lcd, FB_BLANK_UNBLANK);
+}
+#else
+#define tdo24m_suspend NULL
+#define tdo24m_resume NULL
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+static void tdo24m_shutdown(struct spi_device *spi)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ tdo24m_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static struct spi_driver tdo24m_driver = {
+ .driver = {
+ .name = "tdo24m",
+ .owner = THIS_MODULE,
+ },
+ .probe = tdo24m_probe,
+ .remove = __devexit_p(tdo24m_remove),
+ .shutdown = tdo24m_shutdown,
+ .suspend = tdo24m_suspend,
+ .resume = tdo24m_resume,
+};
+
+static int __init tdo24m_init(void)
+{
+ return spi_register_driver(&tdo24m_driver);
+}
+module_init(tdo24m_init);
+
+static void __exit tdo24m_exit(void)
+{
+ spi_unregister_driver(&tdo24m_driver);
+}
+module_exit(tdo24m_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 98843c2ecf7..0737570030f 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -979,6 +979,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
info->flags &= ~FBINFO_MISC_USEREVENT;
event.info = info;
+ event.data = &mode;
fb_notifier_call_chain(evnt, &event);
}
}
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index cc4c038a1b3..afeed0611e3 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -40,29 +40,63 @@
#include <asm/unaligned.h>
-
-#define DEBUG 1
-#ifdef DEBUG
-#define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
-#else
-#define DPRINTK(f, a...)
-#endif
-
-
/* Display specific information */
#define DPY_W 832
#define DPY_H 622
+static int user_wfm_size;
+
/* frame differs from image. frame includes non-visible pixels */
struct epd_frame {
int fw; /* frame width */
int fh; /* frame height */
+ u16 config[4];
+ int wfm_size;
};
static struct epd_frame epd_frame_table[] = {
{
- .fw = 832,
- .fh = 622
+ .fw = 832,
+ .fh = 622,
+ .config = {
+ 15 /* sdlew */
+ | 2 << 8 /* sdosz */
+ | 0 << 11 /* sdor */
+ | 0 << 12 /* sdces */
+ | 0 << 15, /* sdcer */
+ 42 /* gdspl */
+ | 1 << 8 /* gdr1 */
+ | 1 << 9 /* sdshr */
+ | 0 << 15, /* gdspp */
+ 18 /* gdspw */
+ | 0 << 15, /* dispc */
+ 599 /* vdlc */
+ | 0 << 11 /* dsi */
+ | 0 << 12, /* dsic */
+ },
+ .wfm_size = 47001,
+ },
+ {
+ .fw = 1088,
+ .fh = 791,
+ .config = {
+ 0x0104,
+ 0x031f,
+ 0x0088,
+ 0x02ff,
+ },
+ .wfm_size = 46770,
+ },
+ {
+ .fw = 1200,
+ .fh = 842,
+ .config = {
+ 0x0101,
+ 0x030e,
+ 0x0012,
+ 0x0280,
+ },
+ .wfm_size = 46770,
},
};
@@ -134,9 +168,8 @@ static u16 calc_img_cksum(u16 *start, int length)
}
/* here we decode the incoming waveform file and populate metromem */
-#define EXP_WFORM_SIZE 47001
-static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
- u8 *frame_count)
+static int __devinit load_waveform(u8 *mem, size_t size, int m, int t,
+ struct metronomefb_par *par)
{
int tta;
int wmta;
@@ -148,26 +181,31 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
int wfm_idx, owfm_idx;
int mem_idx = 0;
struct waveform_hdr *wfm_hdr;
+ u8 *metromem = par->metromem_wfm;
+ struct device *dev = par->info->dev;
- if (size != EXP_WFORM_SIZE) {
- printk(KERN_ERR "Error: unexpected size %d != %d\n", size,
- EXP_WFORM_SIZE);
+ if (user_wfm_size)
+ epd_frame_table[par->dt].wfm_size = user_wfm_size;
+
+ if (size != epd_frame_table[par->dt].wfm_size) {
+ dev_err(dev, "Error: unexpected size %d != %d\n", size,
+ epd_frame_table[par->dt].wfm_size);
return -EINVAL;
}
wfm_hdr = (struct waveform_hdr *) mem;
if (wfm_hdr->fvsn != 1) {
- printk(KERN_ERR "Error: bad fvsn %x\n", wfm_hdr->fvsn);
+ dev_err(dev, "Error: bad fvsn %x\n", wfm_hdr->fvsn);
return -EINVAL;
}
if (wfm_hdr->luts != 0) {
- printk(KERN_ERR "Error: bad luts %x\n", wfm_hdr->luts);
+ dev_err(dev, "Error: bad luts %x\n", wfm_hdr->luts);
return -EINVAL;
}
cksum = calc_cksum(32, 47, mem);
if (cksum != wfm_hdr->wfm_cs) {
- printk(KERN_ERR "Error: bad cksum %x != %x\n", cksum,
+ dev_err(dev, "Error: bad cksum %x != %x\n", cksum,
wfm_hdr->wfm_cs);
return -EINVAL;
}
@@ -175,7 +213,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
wfm_hdr->trc += 1;
for (i = 0; i < 5; i++) {
if (*(wfm_hdr->stuff2a + i) != 0) {
- printk(KERN_ERR "Error: unexpected value in padding\n");
+ dev_err(dev, "Error: unexpected value in padding\n");
return -EINVAL;
}
}
@@ -200,7 +238,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad temperature range table cksum"
+ dev_err(dev, "Error: bad temperature range table cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
@@ -212,7 +250,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad mode table address cksum"
+ dev_err(dev, "Error: bad mode table address cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
@@ -224,7 +262,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad temperature table address cksum"
+ dev_err(dev, "Error: bad temperature table address cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
@@ -259,11 +297,11 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(owfm_idx, cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad waveform data cksum"
+ dev_err(dev, "Error: bad waveform data cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
- *frame_count = (mem_idx/64);
+ par->frame_count = (mem_idx/64);
return 0;
}
@@ -274,15 +312,12 @@ static int metronome_display_cmd(struct metronomefb_par *par)
u16 cs;
u16 opcode;
static u8 borderval;
- u8 *ptr;
/* setup display command
we can't immediately set the opcode since the controller
will try parse the command before we've set it all up
so we just set cs here and set the opcode at the end */
- ptr = par->metromem;
-
if (par->metromem_cmd->opcode == 0xCC40)
opcode = cs = 0xCC41;
else
@@ -335,44 +370,17 @@ static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
static int __devinit metronome_config_cmd(struct metronomefb_par *par)
{
- int i;
- u16 cs;
-
/* setup config command
we can't immediately set the opcode since the controller
- will try parse the command before we've set it all up
- so we just set cs here and set the opcode at the end */
-
- cs = 0xCC10;
-
- /* set the 12 args ( 8 bytes ) for config. see spec for meanings */
- i = 0;
- par->metromem_cmd->args[i] = 15 /* sdlew */
- | 2 << 8 /* sdosz */
- | 0 << 11 /* sdor */
- | 0 << 12 /* sdces */
- | 0 << 15; /* sdcer */
- cs += par->metromem_cmd->args[i++];
-
- par->metromem_cmd->args[i] = 42 /* gdspl */
- | 1 << 8 /* gdr1 */
- | 1 << 9 /* sdshr */
- | 0 << 15; /* gdspp */
- cs += par->metromem_cmd->args[i++];
-
- par->metromem_cmd->args[i] = 18 /* gdspw */
- | 0 << 15; /* dispc */
- cs += par->metromem_cmd->args[i++];
-
- par->metromem_cmd->args[i] = 599 /* vdlc */
- | 0 << 11 /* dsi */
- | 0 << 12; /* dsic */
- cs += par->metromem_cmd->args[i++];
+ will try parse the command before we've set it all up */
+ memcpy(par->metromem_cmd->args, epd_frame_table[par->dt].config,
+ sizeof(epd_frame_table[par->dt].config));
/* the rest are 0 */
- memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+ memset((u8 *) (par->metromem_cmd->args + 4), 0, (32-4)*2);
- par->metromem_cmd->csum = cs;
+ par->metromem_cmd->csum = 0xCC10;
+ par->metromem_cmd->csum += calc_img_cksum(par->metromem_cmd->args, 4);
par->metromem_cmd->opcode = 0xCC10; /* config cmd */
return par->board->met_wait_event(par);
@@ -408,12 +416,9 @@ static int __devinit metronome_init_regs(struct metronomefb_par *par)
{
int res;
- par->board->init_gpio_regs(par);
-
- par->board->init_lcdc_regs(par);
-
- /* now that lcd is setup, setup dma descriptor */
- par->board->post_dma_setup(par);
+ res = par->board->setup_io(par);
+ if (res)
+ return res;
res = metronome_powerup_cmd(par);
if (res)
@@ -430,16 +435,16 @@ static int __devinit metronome_init_regs(struct metronomefb_par *par)
static void metronomefb_dpy_update(struct metronomefb_par *par)
{
+ int fbsize;
u16 cksum;
unsigned char *buf = (unsigned char __force *)par->info->screen_base;
+ fbsize = par->info->fix.smem_len;
/* copy from vm to metromem */
- memcpy(par->metromem_img, buf, DPY_W*DPY_H);
+ memcpy(par->metromem_img, buf, fbsize);
- cksum = calc_img_cksum((u16 *) par->metromem_img,
- (epd_frame_table[0].fw * DPY_H)/2);
- *((u16 *)(par->metromem_img) +
- (epd_frame_table[0].fw * DPY_H)/2) = cksum;
+ cksum = calc_img_cksum((u16 *) par->metromem_img, fbsize/2);
+ *((u16 *)(par->metromem_img) + fbsize/2) = cksum;
metronome_display_cmd(par);
}
@@ -574,8 +579,10 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
unsigned char *videomemory;
struct metronomefb_par *par;
const struct firmware *fw_entry;
- int cmd_size, wfm_size, img_size, padding_size, totalsize;
int i;
+ int panel_type;
+ int fw, fh;
+ int epd_dt_index;
/* pick up board specific routines */
board = dev->dev.platform_data;
@@ -586,96 +593,108 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
if (!try_module_get(board->owner))
return -ENODEV;
+ info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
+ if (!info)
+ goto err;
+
/* we have two blocks of memory.
info->screen_base which is vm, and is the fb used by apps.
par->metromem which is physically contiguous memory and
contains the display controller commands, waveform,
processed image data and padding. this is the data pulled
- by the device's LCD controller and pushed to Metronome */
+ by the device's LCD controller and pushed to Metronome.
+ the metromem memory is allocated by the board driver and
+ is provided to us */
+
+ panel_type = board->get_panel_type();
+ switch (panel_type) {
+ case 6:
+ epd_dt_index = 0;
+ break;
+ case 8:
+ epd_dt_index = 1;
+ break;
+ case 97:
+ epd_dt_index = 2;
+ break;
+ default:
+ dev_err(&dev->dev, "Unexpected panel type. Defaulting to 6\n");
+ epd_dt_index = 0;
+ break;
+ }
+
+ fw = epd_frame_table[epd_dt_index].fw;
+ fh = epd_frame_table[epd_dt_index].fh;
- videomemorysize = (DPY_W*DPY_H);
+ /* we need to add a spare page because our csum caching scheme walks
+ * to the end of the page */
+ videomemorysize = PAGE_SIZE + (fw * fh);
videomemory = vmalloc(videomemorysize);
if (!videomemory)
- return -ENOMEM;
+ goto err_fb_rel;
memset(videomemory, 0, videomemorysize);
- info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
- if (!info)
- goto err_vfree;
-
info->screen_base = (char __force __iomem *)videomemory;
info->fbops = &metronomefb_ops;
+ metronomefb_fix.line_length = fw;
+ metronomefb_var.xres = fw;
+ metronomefb_var.yres = fh;
+ metronomefb_var.xres_virtual = fw;
+ metronomefb_var.yres_virtual = fh;
info->var = metronomefb_var;
info->fix = metronomefb_fix;
info->fix.smem_len = videomemorysize;
par = info->par;
par->info = info;
par->board = board;
+ par->dt = epd_dt_index;
init_waitqueue_head(&par->waitq);
/* this table caches per page csum values. */
par->csum_table = vmalloc(videomemorysize/PAGE_SIZE);
if (!par->csum_table)
+ goto err_vfree;
+
+ /* the physical framebuffer that we use is setup by
+ * the platform device driver. It will provide us
+ * with cmd, wfm and image memory in a contiguous area. */
+ retval = board->setup_fb(par);
+ if (retval) {
+ dev_err(&dev->dev, "Failed to setup fb\n");
goto err_csum_table;
+ }
- /* the metromem buffer is divided as follows:
- command | CRC | padding
- 16kb waveform data | CRC | padding
- image data | CRC
- and an extra 256 bytes for dma descriptors
- eg: IW=832 IH=622 WS=128
- */
-
- cmd_size = 1 * epd_frame_table[0].fw;
- wfm_size = ((16*1024 + 2 + epd_frame_table[0].fw - 1)
- / epd_frame_table[0].fw) * epd_frame_table[0].fw;
- img_size = epd_frame_table[0].fh * epd_frame_table[0].fw;
- padding_size = 4 * epd_frame_table[0].fw;
- totalsize = cmd_size + wfm_size + img_size + padding_size;
- par->metromemsize = PAGE_ALIGN(totalsize + 256);
- DPRINTK("desired memory size = %d\n", par->metromemsize);
- dev->dev.coherent_dma_mask = 0xffffffffull;
- par->metromem = dma_alloc_writecombine(&dev->dev, par->metromemsize,
- &par->metromem_dma, GFP_KERNEL);
- if (!par->metromem) {
- printk(KERN_ERR
- "metronomefb: unable to allocate dma buffer\n");
- goto err_vfree;
+ /* after this point we should have a framebuffer */
+ if ((!par->metromem_wfm) || (!par->metromem_img) ||
+ (!par->metromem_dma)) {
+ dev_err(&dev->dev, "fb access failure\n");
+ retval = -EINVAL;
+ goto err_csum_table;
}
info->fix.smem_start = par->metromem_dma;
- par->metromem_cmd = (struct metromem_cmd *) par->metromem;
- par->metromem_wfm = par->metromem + cmd_size;
- par->metromem_img = par->metromem + cmd_size + wfm_size;
- par->metromem_img_csum = (u16 *) (par->metromem_img +
- (epd_frame_table[0].fw * DPY_H));
- DPRINTK("img offset=0x%x\n", cmd_size + wfm_size);
- par->metromem_desc = (struct metromem_desc *) (par->metromem + cmd_size
- + wfm_size + img_size + padding_size);
- par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size
- + img_size + padding_size;
/* load the waveform in. assume mode 3, temp 31 for now
a) request the waveform file from userspace
b) process waveform and decode into metromem */
retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev);
if (retval < 0) {
- printk(KERN_ERR "metronomefb: couldn't get waveform\n");
- goto err_dma_free;
+ dev_err(&dev->dev, "Failed to get waveform\n");
+ goto err_csum_table;
}
- retval = load_waveform((u8 *) fw_entry->data, fw_entry->size,
- par->metromem_wfm, 3, 31, &par->frame_count);
+ retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31,
+ par);
release_firmware(fw_entry);
if (retval < 0) {
- printk(KERN_ERR "metronomefb: couldn't process waveform\n");
- goto err_dma_free;
+ dev_err(&dev->dev, "Failed processing waveform\n");
+ goto err_csum_table;
}
if (board->setup_irq(info))
- goto err_dma_free;
+ goto err_csum_table;
retval = metronome_init_regs(par);
if (retval < 0)
@@ -688,8 +707,8 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
retval = fb_alloc_cmap(&info->cmap, 8, 0);
if (retval < 0) {
- printk(KERN_ERR "Failed to allocate colormap\n");
- goto err_fb_rel;
+ dev_err(&dev->dev, "Failed to allocate colormap\n");
+ goto err_free_irq;
}
/* set cmap */
@@ -704,7 +723,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
- printk(KERN_INFO
+ dev_dbg(&dev->dev,
"fb%d: Metronome frame buffer device, using %dK of video"
" memory\n", info->node, videomemorysize >> 10);
@@ -712,17 +731,15 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
err_cmap:
fb_dealloc_cmap(&info->cmap);
-err_fb_rel:
- framebuffer_release(info);
err_free_irq:
- board->free_irq(info);
-err_dma_free:
- dma_free_writecombine(&dev->dev, par->metromemsize, par->metromem,
- par->metromem_dma);
+ board->cleanup(par);
err_csum_table:
vfree(par->csum_table);
err_vfree:
vfree(videomemory);
+err_fb_rel:
+ framebuffer_release(info);
+err:
module_put(board->owner);
return retval;
}
@@ -733,15 +750,15 @@ static int __devexit metronomefb_remove(struct platform_device *dev)
if (info) {
struct metronomefb_par *par = info->par;
+
+ unregister_framebuffer(info);
fb_deferred_io_cleanup(info);
- dma_free_writecombine(&dev->dev, par->metromemsize,
- par->metromem, par->metromem_dma);
fb_dealloc_cmap(&info->cmap);
+ par->board->cleanup(par);
vfree(par->csum_table);
- unregister_framebuffer(info);
vfree((void __force *)info->screen_base);
- par->board->free_irq(info);
module_put(par->board->owner);
+ dev_dbg(&dev->dev, "calling release\n");
framebuffer_release(info);
}
return 0;
@@ -766,6 +783,9 @@ static void __exit metronomefb_exit(void)
platform_driver_unregister(&metronomefb_driver);
}
+module_param(user_wfm_size, uint, 0);
+MODULE_PARM_DESC(user_wfm_size, "Set custom waveform size");
+
module_init(metronomefb_init);
module_exit(metronomefb_exit);
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 6efcf89e7fb..dfb72f5e4c9 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -156,7 +156,7 @@ struct resmap {
};
static struct {
- u32 base;
+ void __iomem *base;
struct omapfb_mem_desc mem_desc;
struct resmap *res_map[DISPC_MEMTYPE_NUM];
@@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable)
dispc_write_reg(DISPC_CONTROL, l);
/* Set bypass mode in RFBI module */
- l = __raw_readl(io_p2v(RFBI_CONTROL));
+ l = __raw_readl(IO_ADDRESS(RFBI_CONTROL));
l |= enable ? 0 : (1 << 1);
- __raw_writel(l, io_p2v(RFBI_CONTROL));
+ __raw_writel(l, IO_ADDRESS(RFBI_CONTROL));
}
static void set_lcd_data_lines(int data_lines)
@@ -1349,14 +1349,19 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
memset(&dispc, 0, sizeof(dispc));
- dispc.base = io_p2v(DISPC_BASE);
+ dispc.base = ioremap(DISPC_BASE, SZ_1K);
+ if (!dispc.base) {
+ dev_err(fbdev->dev, "can't ioremap DISPC\n");
+ return -ENOMEM;
+ }
+
dispc.fbdev = fbdev;
dispc.ext_mode = ext_mode;
init_completion(&dispc.frame_done);
if ((r = get_dss_clocks()) < 0)
- return r;
+ goto fail0;
enable_interface_clocks(1);
enable_lcd_clocks(1);
@@ -1414,7 +1419,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
}
/* L3 firewall setting: enable access to OCM RAM */
- __raw_writel(0x402000b0, io_p2v(0x680050a0));
+ __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
if ((r = alloc_palette_ram()) < 0)
goto fail2;
@@ -1464,7 +1469,8 @@ fail1:
enable_lcd_clocks(0);
enable_interface_clocks(0);
put_dss_clocks();
-
+fail0:
+ iounmap(dispc.base);
return r;
}
@@ -1481,6 +1487,7 @@ static void omap_dispc_cleanup(void)
free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
enable_interface_clocks(0);
put_dss_clocks();
+ iounmap(dispc.base);
}
const struct lcd_ctrl omap2_int_ctrl = {
diff --git a/drivers/video/omap/dispc.h b/drivers/video/omap/dispc.h
index eb1512b56ce..ef720a78f6d 100644
--- a/drivers/video/omap/dispc.h
+++ b/drivers/video/omap/dispc.h
@@ -40,4 +40,6 @@ extern void omap_dispc_enable_digit_out(int enable);
extern int omap_dispc_request_irq(void (*callback)(void *data), void *data);
extern void omap_dispc_free_irq(void);
+extern const struct lcd_ctrl omap2_int_ctrl;
+
#endif
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
index 88c19d424ef..6ff56430341 100644
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -47,7 +47,7 @@ static unsigned long h4_panel_get_caps(struct lcd_panel *panel)
return 0;
}
-struct lcd_panel h4_panel = {
+static struct lcd_panel h4_panel = {
.name = "h4",
.config = OMAP_LCDC_PANEL_TFT,
@@ -91,7 +91,7 @@ static int h4_panel_resume(struct platform_device *pdev)
return 0;
}
-struct platform_driver h4_panel_driver = {
+static struct platform_driver h4_panel_driver = {
.probe = h4_panel_probe,
.remove = h4_panel_remove,
.suspend = h4_panel_suspend,
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 83514f06671..6e2ea751876 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -34,6 +34,8 @@
#include <asm/mach-types.h>
+#include "lcdc.h"
+
#define MODULE_NAME "lcdc"
#define OMAP_LCDC_BASE 0xfffec000
diff --git a/drivers/video/omap/lcdc.h b/drivers/video/omap/lcdc.h
index adb731e5314..845222270db 100644
--- a/drivers/video/omap/lcdc.h
+++ b/drivers/video/omap/lcdc.h
@@ -4,4 +4,6 @@
int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data);
void omap_lcdc_free_dma_callback(void);
+extern const struct lcd_ctrl omap1_int_ctrl;
+
#endif
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 51a138bd113..5a5e407dc45 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -31,11 +31,14 @@
#include <mach/dma.h>
#include <mach/omapfb.h>
+#include "lcdc.h"
+#include "dispc.h"
+
#define MODULE_NAME "omapfb"
static unsigned int def_accel;
static unsigned long def_vram[OMAPFB_PLANE_NUM];
-static int def_vram_cnt;
+static unsigned int def_vram_cnt;
static unsigned long def_vxres;
static unsigned long def_vyres;
static unsigned int def_rotate;
@@ -84,12 +87,10 @@ static struct caps_table_struct color_caps[] = {
* LCD panel
* ---------------------------------------------------------------------------
*/
-extern struct lcd_ctrl omap1_int_ctrl;
-extern struct lcd_ctrl omap2_int_ctrl;
extern struct lcd_ctrl hwa742_ctrl;
extern struct lcd_ctrl blizzard_ctrl;
-static struct lcd_ctrl *ctrls[] = {
+static const struct lcd_ctrl *ctrls[] = {
#ifdef CONFIG_ARCH_OMAP1
&omap1_int_ctrl,
#else
@@ -740,7 +741,7 @@ static int omapfb_update_win(struct fb_info *fbi,
int ret;
omapfb_rqueue_lock(plane->fbdev);
- ret = omapfb_update_window_async(fbi, win, NULL, 0);
+ ret = omapfb_update_window_async(fbi, win, NULL, NULL);
omapfb_rqueue_unlock(plane->fbdev);
return ret;
@@ -768,7 +769,7 @@ static int omapfb_update_full_screen(struct fb_info *fbi)
win.format = 0;
omapfb_rqueue_lock(fbdev);
- r = fbdev->ctrl->update_window(fbi, &win, NULL, 0);
+ r = fbdev->ctrl->update_window(fbi, &win, NULL, NULL);
omapfb_rqueue_unlock(fbdev);
return r;
@@ -1047,7 +1048,7 @@ void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval)
win.height = 2;
win.out_width = 2;
win.out_height = 2;
- fbdev->ctrl->update_window(fbdev->fb_info[0], &win, NULL, 0);
+ fbdev->ctrl->update_window(fbdev->fb_info[0], &win, NULL, NULL);
}
omapfb_rqueue_unlock(fbdev);
}
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 4a6f13d3fac..a13c8dcad2a 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -59,7 +59,7 @@
#define DISPC_CONTROL 0x0040
static struct {
- u32 base;
+ void __iomem *base;
void (*lcdc_callback)(void *data);
void *lcdc_callback_data;
unsigned long l4_khz;
@@ -518,7 +518,11 @@ static int rfbi_init(struct omapfb_device *fbdev)
int r;
rfbi.fbdev = fbdev;
- rfbi.base = io_p2v(RFBI_BASE);
+ rfbi.base = ioremap(RFBI_BASE, SZ_1K);
+ if (!rfbi.base) {
+ dev_err(fbdev->dev, "can't ioremap RFBI\n");
+ return -ENOMEM;
+ }
if ((r = rfbi_get_clocks()) < 0)
return r;
@@ -566,6 +570,7 @@ static void rfbi_cleanup(void)
{
omap_dispc_free_irq();
rfbi_put_clocks();
+ iounmap(rfbi.base);
}
const struct lcd_ctrl_extif omap2_ext_if = {
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index 6359353c2c6..a7694622024 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -574,7 +574,12 @@ static int sossi_init(struct omapfb_device *fbdev)
struct clk *dpll1out_ck;
int r;
- sossi.base = (void __iomem *)IO_ADDRESS(OMAP_SOSSI_BASE);
+ sossi.base = ioremap(OMAP_SOSSI_BASE, SZ_1K);
+ if (!sossi.base) {
+ dev_err(fbdev->dev, "can't ioremap SoSSI\n");
+ return -ENOMEM;
+ }
+
sossi.fbdev = fbdev;
spin_lock_init(&sossi.lock);
@@ -665,6 +670,7 @@ static void sossi_cleanup(void)
{
omap_lcdc_free_dma_callback();
clk_put(sossi.fck);
+ iounmap(sossi.base);
}
struct lcd_ctrl_extif omap1_ext_if = {
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 8302ef005be..147b4d5c63b 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -174,10 +174,8 @@ static struct miscdevice ixp4xx_wdt_miscdev = {
static int __init ixp4xx_wdt_init(void)
{
int ret;
- unsigned long processor_id;
- asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
- if (!(processor_id & 0xf) && !cpu_is_ixp46x()) {
+ if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) {
printk(KERN_ERR "IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected"
" - watchdog disabled\n");
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index 173febac665..c67fecafff9 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
+#include <linux/fb.h>
/* Notes on locking:
*
@@ -45,6 +46,8 @@ struct lcd_ops {
int (*get_contrast)(struct lcd_device *);
/* Set LCD panel contrast */
int (*set_contrast)(struct lcd_device *, int contrast);
+ /* Set LCD panel mode (resolutions ...) */
+ int (*set_mode)(struct lcd_device *, struct fb_videomode *);
/* Check if given framebuffer device is the one LCD is bound to;
return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
int (*check_fb)(struct lcd_device *, struct fb_info *);
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 3827b922ba1..bc21db598c0 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -16,8 +16,19 @@
#define SMC91X_USE_DMA (1 << 6)
+#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
+#define RPC_LED_RES (0x01) /* LED = Reserved */
+#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
+#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
+#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
+#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
+#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
+#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
+
struct smc91x_platdata {
unsigned long flags;
+ unsigned char leda;
+ unsigned char ledb;
};
#endif /* __SMC91X_H__ */
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index daf744017a3..05eab2f11e6 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -43,6 +43,9 @@ struct ads7846_platform_data {
u16 debounce_tol; /* tolerance used for filtering */
u16 debounce_rep; /* additional consecutive good readings
* required after the first two */
+ int gpio_pendown; /* the GPIO used to decide the pendown
+ * state if get_pendown_state == NULL
+ */
int (*get_pendown_state)(void);
int (*filter_init) (struct ads7846_platform_data *pdata,
void **filter_data);
diff --git a/include/linux/spi/corgi_lcd.h b/include/linux/spi/corgi_lcd.h
new file mode 100644
index 00000000000..6692b3418cc
--- /dev/null
+++ b/include/linux/spi/corgi_lcd.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_SPI_CORGI_LCD_H
+#define __LINUX_SPI_CORGI_LCD_H
+
+#define CORGI_LCD_MODE_QVGA 1
+#define CORGI_LCD_MODE_VGA 2
+
+struct corgi_lcd_platform_data {
+ int init_mode;
+ int max_intensity;
+ int default_intensity;
+ int limit_mask;
+
+ int gpio_backlight_on; /* -1 if n/a */
+ int gpio_backlight_cont; /* -1 if n/a */
+
+ void (*notify)(int intensity);
+ void (*kick_battery)(void);
+};
+
+#endif /* __LINUX_SPI_CORGI_LCD_H */
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
new file mode 100644
index 00000000000..970473bf8d5
--- /dev/null
+++ b/include/linux/ucb1400.h
@@ -0,0 +1,161 @@
+/*
+ * Register definitions and functions for:
+ * Philips UCB1400 driver
+ *
+ * Based on ucb1400_ts:
+ * Author: Nicolas Pitre
+ * Created: September 25, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#ifndef _LINUX__UCB1400_H
+#define _LINUX__UCB1400_H
+
+#include <sound/ac97_codec.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+/*
+ * UCB1400 AC-link registers
+ */
+
+#define UCB_IO_DATA 0x5a
+#define UCB_IO_DIR 0x5c
+#define UCB_IE_RIS 0x5e
+#define UCB_IE_FAL 0x60
+#define UCB_IE_STATUS 0x62
+#define UCB_IE_CLEAR 0x62
+#define UCB_IE_ADC (1 << 11)
+#define UCB_IE_TSPX (1 << 12)
+
+#define UCB_TS_CR 0x64
+#define UCB_TS_CR_TSMX_POW (1 << 0)
+#define UCB_TS_CR_TSPX_POW (1 << 1)
+#define UCB_TS_CR_TSMY_POW (1 << 2)
+#define UCB_TS_CR_TSPY_POW (1 << 3)
+#define UCB_TS_CR_TSMX_GND (1 << 4)
+#define UCB_TS_CR_TSPX_GND (1 << 5)
+#define UCB_TS_CR_TSMY_GND (1 << 6)
+#define UCB_TS_CR_TSPY_GND (1 << 7)
+#define UCB_TS_CR_MODE_INT (0 << 8)
+#define UCB_TS_CR_MODE_PRES (1 << 8)
+#define UCB_TS_CR_MODE_POS (2 << 8)
+#define UCB_TS_CR_BIAS_ENA (1 << 11)
+#define UCB_TS_CR_TSPX_LOW (1 << 12)
+#define UCB_TS_CR_TSMX_LOW (1 << 13)
+
+#define UCB_ADC_CR 0x66
+#define UCB_ADC_SYNC_ENA (1 << 0)
+#define UCB_ADC_VREFBYP_CON (1 << 1)
+#define UCB_ADC_INP_TSPX (0 << 2)
+#define UCB_ADC_INP_TSMX (1 << 2)
+#define UCB_ADC_INP_TSPY (2 << 2)
+#define UCB_ADC_INP_TSMY (3 << 2)
+#define UCB_ADC_INP_AD0 (4 << 2)
+#define UCB_ADC_INP_AD1 (5 << 2)
+#define UCB_ADC_INP_AD2 (6 << 2)
+#define UCB_ADC_INP_AD3 (7 << 2)
+#define UCB_ADC_EXT_REF (1 << 5)
+#define UCB_ADC_START (1 << 7)
+#define UCB_ADC_ENA (1 << 15)
+
+#define UCB_ADC_DATA 0x68
+#define UCB_ADC_DAT_VALID (1 << 15)
+#define UCB_ADC_DAT_MASK 0x3ff
+
+#define UCB_ID 0x7e
+#define UCB_ID_1400 0x4304
+
+struct ucb1400_ts {
+ struct input_dev *ts_idev;
+ struct task_struct *ts_task;
+ int id;
+ wait_queue_head_t ts_wait;
+ unsigned int ts_restart:1;
+ int irq;
+ unsigned int irq_pending; /* not bit field shared */
+ struct snd_ac97 *ac97;
+};
+
+struct ucb1400 {
+ struct platform_device *ucb1400_ts;
+};
+
+static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
+{
+ return ac97->bus->ops->read(ac97, reg);
+}
+
+static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
+{
+ ac97->bus->ops->write(ac97, reg, val);
+}
+
+static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
+{
+ return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
+ u16 val)
+{
+ ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
+ ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
+ ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
+}
+
+static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
+{
+ return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
+ u16 dir)
+{
+ ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
+ ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
+ ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
+}
+
+static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
+{
+ ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
+}
+
+static unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
+ int adcsync)
+{
+ unsigned int val;
+
+ if (adcsync)
+ adc_channel |= UCB_ADC_SYNC_ENA;
+
+ ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
+ ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel |
+ UCB_ADC_START);
+
+ while (!((val = ucb1400_reg_read(ac97, UCB_ADC_DATA))
+ & UCB_ADC_DAT_VALID))
+ schedule_timeout_uninterruptible(1);
+
+ return val & UCB_ADC_DAT_MASK;
+}
+
+static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
+{
+ ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
+}
+
+#endif
diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h
new file mode 100644
index 00000000000..9681d1ab0e4
--- /dev/null
+++ b/include/linux/wm97xx_batt.h
@@ -0,0 +1,26 @@
+#ifndef _LINUX_WM97XX_BAT_H
+#define _LINUX_WM97XX_BAT_H
+
+#include <linux/wm97xx.h>
+
+struct wm97xx_batt_info {
+ int batt_aux;
+ int temp_aux;
+ int charge_gpio;
+ int min_voltage;
+ int max_voltage;
+ int batt_div;
+ int batt_mult;
+ int temp_div;
+ int temp_mult;
+ int batt_tech;
+ char *batt_name;
+};
+
+#ifdef CONFIG_BATTERY_WM97XX
+void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
+#else
+static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
+#endif
+
+#endif
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 920c4e9cb93..6ad87f48599 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -30,6 +30,7 @@
*/
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
+#define ATMEL_LCDC_WIRING_RGB555 2
/* LCD Controller info data structure, stored in device platform_data */
diff --git a/include/video/metronomefb.h b/include/video/metronomefb.h
index dab04b4fad7..9863f4b6d41 100644
--- a/include/video/metronomefb.h
+++ b/include/video/metronomefb.h
@@ -12,14 +12,6 @@
#ifndef _LINUX_METRONOMEFB_H_
#define _LINUX_METRONOMEFB_H_
-/* address and control descriptors used by metronome controller */
-struct metromem_desc {
- u32 mFDADR0;
- u32 mFSADR0;
- u32 mFIDR0;
- u32 mLDCMD0;
-};
-
/* command structure used by metronome controller */
struct metromem_cmd {
u16 opcode;
@@ -29,34 +21,37 @@ struct metromem_cmd {
/* struct used by metronome. board specific stuff comes from *board */
struct metronomefb_par {
- unsigned char *metromem;
- struct metromem_desc *metromem_desc;
struct metromem_cmd *metromem_cmd;
unsigned char *metromem_wfm;
unsigned char *metromem_img;
u16 *metromem_img_csum;
u16 *csum_table;
- int metromemsize;
dma_addr_t metromem_dma;
- dma_addr_t metromem_desc_dma;
struct fb_info *info;
struct metronome_board *board;
wait_queue_head_t waitq;
u8 frame_count;
+ int extra_size;
+ int dt;
};
-/* board specific routines */
+/* board specific routines and data */
struct metronome_board {
- struct module *owner;
- void (*free_irq)(struct fb_info *);
- void (*init_gpio_regs)(struct metronomefb_par *);
- void (*init_lcdc_regs)(struct metronomefb_par *);
- void (*post_dma_setup)(struct metronomefb_par *);
+ struct module *owner; /* the platform device */
void (*set_rst)(struct metronomefb_par *, int);
void (*set_stdby)(struct metronomefb_par *, int);
+ void (*cleanup)(struct metronomefb_par *);
int (*met_wait_event)(struct metronomefb_par *);
int (*met_wait_event_intr)(struct metronomefb_par *);
int (*setup_irq)(struct fb_info *);
+ int (*setup_fb)(struct metronomefb_par *);
+ int (*setup_io)(struct metronomefb_par *);
+ int (*get_panel_type)(void);
+ unsigned char *metromem;
+ int fw;
+ int fh;
+ int wfm_size;
+ struct fb_info *host_fbinfo; /* the host LCD controller's fbi */
};
#endif
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 199cca3366d..714b3baa4be 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -215,7 +215,7 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out = {
.name = "AC97 PCM out",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRTXPCDR,
+ .drcmr = &DRCMR(12),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -223,7 +223,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_in = {
.name = "AC97 PCM in",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRRXPCDR,
+ .drcmr = &DRCMR(11),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 0a53f72077f..fa69faa886e 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -18,13 +18,13 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/corgi.h>
@@ -54,8 +54,8 @@ static void corgi_ext_control(struct snd_soc_codec *codec)
switch (corgi_jack_func) {
case CORGI_HP:
/* set = unmute headphone */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 1);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
@@ -63,24 +63,24 @@ static void corgi_ext_control(struct snd_soc_codec *codec)
break;
case CORGI_MIC:
/* reset = mute headphone */
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
snd_soc_dapm_disable_pin(codec, "Headset Jack");
break;
case CORGI_LINE:
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_enable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
snd_soc_dapm_disable_pin(codec, "Headset Jack");
break;
case CORGI_HEADSET:
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
@@ -114,8 +114,8 @@ static int corgi_shutdown(struct snd_pcm_substream *substream)
struct snd_soc_codec *codec = rtd->socdev->codec;
/* set = unmute headphone */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 1);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
return 0;
}
@@ -218,22 +218,14 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol,
static int corgi_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+ gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
static int corgi_mic_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
-
+ gpio_set_value(CORGI_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index d94a495bd6b..ac8f227bab0 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -244,7 +244,7 @@ struct snd_ac97_bus_ops soc_ac97_ops = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
.name = "AC97 PCM Stereo out",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRTXPCDR,
+ .drcmr = &DRCMR(12),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -252,7 +252,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
.name = "AC97 PCM Stereo in",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRRXPCDR,
+ .drcmr = &DRCMR(11),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -260,7 +260,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
.name = "AC97 Aux PCM (Slot 5) Mono out",
.dev_addr = __PREG(MODR),
- .drcmr = &DRCMRTXMODR,
+ .drcmr = &DRCMR(10),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -268,7 +268,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
.name = "AC97 Aux PCM (Slot 5) Mono in",
.dev_addr = __PREG(MODR),
- .drcmr = &DRCMRRXMODR,
+ .drcmr = &DRCMR(9),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -276,7 +276,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
.name = "AC97 Mic PCM (Slot 6) Mono in",
.dev_addr = __PREG(MCDR),
- .drcmr = &DRCMRRXMCDR,
+ .drcmr = &DRCMR(8),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -293,14 +293,6 @@ static int pxa2xx_ac97_suspend(struct platform_device *pdev,
static int pxa2xx_ac97_resume(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
- pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
- pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
- pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-#ifdef CONFIG_PXA27x
- /* Use GPIO 113 as AC97 Reset on Bulverde */
- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-#endif
clk_enable(ac97_clk);
return 0;
}
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index c796b188277..ad4c31ddb3d 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -30,6 +30,46 @@
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
+/*
+ * I2S Controller Register and Bit Definitions
+ */
+#define SACR0 __REG(0x40400000) /* Global Control Register */
+#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
+#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
+#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
+#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
+#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
+#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
+#define SACR0_ENB (1 << 0) /* Enable I2S Link */
+#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
+#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
+#define SACR1_DREC (1 << 3) /* Disable Recording Function */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
+
+#define SASR0_I2SOFF (1 << 7) /* Controller Status */
+#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
+#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
+#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
+#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
+#define SASR0_BSY (1 << 2) /* I2S Busy */
+#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
+#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
+
+#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
+
struct pxa_i2s_port {
u32 sadiv;
u32 sacr0;
@@ -44,7 +84,7 @@ static struct clk *clk_i2s;
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
.name = "I2S PCM Stereo out",
.dev_addr = __PREG(SADR),
- .drcmr = &DRCMRTXSADR,
+ .drcmr = &DRCMR(3),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -52,7 +92,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_in = {
.name = "I2S PCM Stereo in",
.dev_addr = __PREG(SADR),
- .drcmr = &DRCMRRXSADR,
+ .drcmr = &DRCMR(2),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 37cb768fc93..b89a3edd218 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -19,16 +19,15 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
-#include <mach/akita.h>
#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
@@ -63,8 +62,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 1);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
break;
case SPITZ_MIC:
/* enable mic jack and bias, mute hp */
@@ -72,8 +71,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Mic Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
case SPITZ_LINE:
/* enable line jack, disable mic bias and mute hp */
@@ -81,8 +80,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_enable_pin(codec, "Line Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
case SPITZ_HEADSET:
/* enable and unmute headset jack enable mic bias, mute L hp */
@@ -90,8 +89,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headset Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
break;
case SPITZ_HP_OFF:
@@ -100,8 +99,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
}
snd_soc_dapm_sync(codec);
@@ -215,23 +214,14 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol,
static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (machine_is_borzoi() || machine_is_spitz()) {
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&spitzscoop2_device.dev,
- SPITZ_SCP2_MIC_BIAS);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev,
- SPITZ_SCP2_MIC_BIAS);
- }
+ if (machine_is_borzoi() || machine_is_spitz())
+ gpio_set_value(SPITZ_GPIO_MIC_BIAS,
+ SND_SOC_DAPM_EVENT_ON(event));
+
+ if (machine_is_akita())
+ gpio_set_value(AKITA_GPIO_MIC_BIAS,
+ SND_SOC_DAPM_EVENT_ON(event));
- if (machine_is_akita()) {
- if (SND_SOC_DAPM_EVENT_ON(event))
- akita_set_ioexp(&akitaioexp_device.dev,
- AKITA_IOEXP_MIC_BIAS);
- else
- akita_reset_ioexp(&akitaioexp_device.dev,
- AKITA_IOEXP_MIC_BIAS);
- }
return 0;
}