aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/sparc64/kernel/etrap.S4
-rw-r--r--arch/sparc64/kernel/rtrap.S2
-rw-r--r--arch/sparc64/kernel/winfixup.S6
-rw-r--r--include/asm-sparc64/cpudata.h19
4 files changed, 18 insertions, 13 deletions
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index db768101729..d974d18b15b 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -100,7 +100,7 @@ etrap_irq:
stx %i7, [%sp + PTREGS_OFF + PT_V9_I7]
wrpr %g0, ETRAP_PSTATE2, %pstate
mov %l6, %g6
- LOAD_PER_CPU_BASE(%g4, %g3)
+ LOAD_PER_CPU_BASE(%g4, %g3, %l1)
jmpl %l2 + 0x4, %g0
ldx [%g6 + TI_TASK], %g4
@@ -250,7 +250,7 @@ scetrap:
stx %i6, [%sp + PTREGS_OFF + PT_V9_I6]
mov %l6, %g6
stx %i7, [%sp + PTREGS_OFF + PT_V9_I7]
- LOAD_PER_CPU_BASE(%g4, %g3)
+ LOAD_PER_CPU_BASE(%g4, %g3, %l1)
ldx [%g6 + TI_TASK], %g4
done
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index 89794ebdcbc..64bc03610bc 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -226,7 +226,7 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1
brz,pt %l3, 1f
nop
/* Must do this before thread reg is clobbered below. */
- LOAD_PER_CPU_BASE(%g6, %g7)
+ LOAD_PER_CPU_BASE(%i0, %i1, %i2)
1:
ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6
ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7
diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S
index c0545d089c9..ade991b7d07 100644
--- a/arch/sparc64/kernel/winfixup.S
+++ b/arch/sparc64/kernel/winfixup.S
@@ -86,7 +86,7 @@ fill_fixup:
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6
ldx [%g6 + TI_TASK], %g4
- LOAD_PER_CPU_BASE(%g1, %g2)
+ LOAD_PER_CPU_BASE(%g1, %g2, %g3)
/* This is the same as below, except we handle this a bit special
* since we must preserve %l5 and %l6, see comment above.
@@ -209,7 +209,7 @@ fill_fixup_mna:
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
- LOAD_PER_CPU_BASE(%g1, %g2)
+ LOAD_PER_CPU_BASE(%g1, %g2, %g3)
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
@@ -312,7 +312,7 @@ fill_fixup_dax:
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
- LOAD_PER_CPU_BASE(%g1, %g2)
+ LOAD_PER_CPU_BASE(%g1, %g2, %g3)
call spitfire_data_access_exception
add %sp, PTREGS_OFF, %o0
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
index 16d62891383..f83768883e9 100644
--- a/include/asm-sparc64/cpudata.h
+++ b/include/asm-sparc64/cpudata.h
@@ -101,20 +101,25 @@ extern void setup_tba(void);
ldx [%g1 + %g6], %g6;
/* Given the current thread info pointer in %g6, load the per-cpu
- * area base of the current processor into %g5. REG1 and REG2 are
+ * area base of the current processor into %g5. REG1, REG2, and REG3 are
* clobbered.
+ *
+ * You absolutely cannot use %g5 as a temporary in this code. The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved %g5 per-cpu base. This can corrupt
+ * the calculations done by the macro mid-stream.
*/
#ifdef CONFIG_SMP
-#define LOAD_PER_CPU_BASE(REG1, REG2) \
+#define LOAD_PER_CPU_BASE(REG1, REG2, REG3) \
ldub [%g6 + TI_CPU], REG1; \
- sethi %hi(__per_cpu_shift), %g5; \
+ sethi %hi(__per_cpu_shift), REG3; \
sethi %hi(__per_cpu_base), REG2; \
- ldx [%g5 + %lo(__per_cpu_shift)], %g5; \
+ ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
ldx [REG2 + %lo(__per_cpu_base)], REG2; \
- sllx REG1, %g5, %g5; \
- add %g5, REG2, %g5;
+ sllx REG1, REG3, REG3; \
+ add REG3, REG2, %g5;
#else
-#define LOAD_PER_CPU_BASE(REG1, REG2)
+#define LOAD_PER_CPU_BASE(REG1, REG2, REG3)
#endif
#endif /* _SPARC64_CPUDATA_H */