aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/md/raid5.c267
-rw-r--r--drivers/md/raid5.h5
2 files changed, 157 insertions, 115 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index edbc80c4d34..d019a85547b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4164,95 +4164,49 @@ static struct attribute_group raid5_attrs_group = {
.attrs = raid5_attrs,
};
-static int run(mddev_t *mddev)
+static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- int working_disks = 0;
- if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
+ if (mddev->new_level != 5
+ && mddev->new_level != 4
+ && mddev->new_level != 6) {
printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
- mdname(mddev), mddev->level);
- return -EIO;
+ mdname(mddev), mddev->new_level);
+ return ERR_PTR(-EIO);
}
- if ((mddev->level == 5 && !algorithm_valid_raid5(mddev->layout)) ||
- (mddev->level == 6 && !algorithm_valid_raid6(mddev->layout))) {
+ if ((mddev->new_level == 5
+ && !algorithm_valid_raid5(mddev->new_layout)) ||
+ (mddev->new_level == 6
+ && !algorithm_valid_raid6(mddev->new_layout))) {
printk(KERN_ERR "raid5: %s: layout %d not supported\n",
- mdname(mddev), mddev->layout);
- return -EIO;
+ mdname(mddev), mddev->new_layout);
+ return ERR_PTR(-EIO);
}
-
- if (mddev->chunk_size < PAGE_SIZE) {
- printk(KERN_ERR "md/raid5: chunk_size must be at least "
- "PAGE_SIZE but %d < %ld\n",
- mddev->chunk_size, PAGE_SIZE);
- return -EINVAL;
+ if (mddev->new_level == 6 && mddev->raid_disks < 4) {
+ printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
+ mdname(mddev), mddev->raid_disks);
+ return ERR_PTR(-EINVAL);
}
- if (mddev->reshape_position != MaxSector) {
- /* Check that we can continue the reshape.
- * Currently only disks can change, it must
- * increase, and we must be past the point where
- * a stripe over-writes itself
- */
- sector_t here_new, here_old;
- int old_disks;
- int max_degraded = (mddev->level == 5 ? 1 : 2);
-
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- if (mddev->delta_disks <= 0) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "(reduce disks) required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- old_disks = mddev->raid_disks - mddev->delta_disks;
- /* reshape_position must be on a new-stripe boundary, and one
- * further up in new geometry must map after here in old
- * geometry.
- */
- here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->chunk_size>>9)*
- (mddev->raid_disks - max_degraded))) {
- printk(KERN_ERR "raid5: reshape_position not "
- "on a stripe boundary\n");
- return -EINVAL;
- }
- /* here_new is the stripe we will write to */
- here_old = mddev->reshape_position;
- sector_div(here_old, (mddev->chunk_size>>9)*
- (old_disks-max_degraded));
- /* here_old is the first stripe that we might need to read
- * from */
- if (here_new >= here_old) {
- /* Reading from the same stripe as writing to - bad */
- printk(KERN_ERR "raid5: reshape_position too early for "
- "auto-recovery - aborting.\n");
- return -EINVAL;
- }
- printk(KERN_INFO "raid5: reshape will continue\n");
- /* OK, we should be able to continue; */
+ if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+ printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
+ mddev->new_chunk, mdname(mddev));
+ return ERR_PTR(-EINVAL);
}
-
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
- if ((conf = mddev->private) == NULL)
+ conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
+ if (conf == NULL)
goto abort;
- if (mddev->reshape_position == MaxSector) {
- conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
- } else {
- conf->raid_disks = mddev->raid_disks;
+
+ conf->raid_disks = mddev->raid_disks;
+ if (mddev->reshape_position == MaxSector)
+ conf->previous_raid_disks = mddev->raid_disks;
+ else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
- }
conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
@@ -4264,13 +4218,12 @@ static int run(mddev_t *mddev)
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->level == 6) {
+ if (mddev->new_level == 6) {
conf->spare_page = alloc_page(GFP_KERNEL);
if (!conf->spare_page)
goto abort;
}
spin_lock_init(&conf->device_lock);
- mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
@@ -4299,41 +4252,136 @@ static int run(mddev_t *mddev)
printk(KERN_INFO "raid5: device %s operational as raid"
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
- working_disks++;
} else
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
- /*
- * 0 for a fully functional array, 1 or 2 for a degraded array.
- */
- mddev->degraded = conf->raid_disks - working_disks;
- conf->mddev = mddev;
- conf->chunk_size = mddev->chunk_size;
- conf->level = mddev->level;
+ conf->chunk_size = mddev->new_chunk;
+ conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
else
conf->max_degraded = 1;
- conf->algorithm = mddev->layout;
+ conf->algorithm = mddev->new_layout;
conf->max_nr_stripes = NR_STRIPES;
conf->expand_progress = mddev->reshape_position;
- /* device size must be a multiple of chunk size */
- mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
- mddev->resync_max_sectors = mddev->dev_sectors;
+ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
+ conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ if (grow_stripes(conf, conf->max_nr_stripes)) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate %dkB for buffers\n", memory);
+ goto abort;
+ } else
+ printk(KERN_INFO "raid5: allocated %dkB for %s\n",
+ memory, mdname(mddev));
- if (conf->level == 6 && conf->raid_disks < 4) {
- printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
- mdname(mddev), conf->raid_disks);
+ conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ if (!conf->thread) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate thread for %s\n",
+ mdname(mddev));
goto abort;
}
- if (!conf->chunk_size || conf->chunk_size % 4) {
- printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- conf->chunk_size, mdname(mddev));
- goto abort;
+
+ return conf;
+
+ abort:
+ if (conf) {
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+ return ERR_PTR(-EIO);
+ } else
+ return ERR_PTR(-ENOMEM);
+}
+
+static int run(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int working_disks = 0;
+ mdk_rdev_t *rdev;
+
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+ int max_degraded = (mddev->level == 5 ? 1 : 2);
+
+ if (mddev->new_level != mddev->level ||
+ mddev->new_layout != mddev->layout ||
+ mddev->new_chunk != mddev->chunk_size) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ if (mddev->delta_disks <= 0) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "(reduce disks) required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old
+ * geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->chunk_size>>9)*
+ (mddev->raid_disks - max_degraded))) {
+ printk(KERN_ERR "raid5: reshape_position not "
+ "on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*
+ (old_disks-max_degraded));
+ /* here_old is the first stripe that we might need to read
+ * from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for "
+ "auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
+ conf = setup_conf(mddev);
+
+ if (conf == NULL)
+ return -EIO;
+ if (IS_ERR(conf))
+ return PTR_ERR(conf);
+
+ mddev->thread = conf->thread;
+ conf->thread = NULL;
+ mddev->private = conf;
+
+ /*
+ * 0 for a fully functional array, 1 or 2 for a degraded array.
+ */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags))
+ working_disks++;
+
+ mddev->degraded = conf->raid_disks - working_disks;
+
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
" (%d/%d failed)\n",
@@ -4341,6 +4389,10 @@ static int run(mddev_t *mddev)
goto abort;
}
+ /* device size must be a multiple of chunk size */
+ mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+ mddev->resync_max_sectors = mddev->dev_sectors;
+
if (mddev->degraded > 0 &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
@@ -4356,27 +4408,6 @@ static int run(mddev_t *mddev)
}
}
- {
- mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5");
- if (!mddev->thread) {
- printk(KERN_ERR
- "raid5: couldn't allocate thread for %s\n",
- mdname(mddev));
- goto abort;
- }
- }
- memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
- if (grow_stripes(conf, conf->max_nr_stripes)) {
- printk(KERN_ERR
- "raid5: couldn't allocate %dkB for buffers\n", memory);
- shrink_stripes(conf);
- md_unregister_thread(mddev->thread);
- goto abort;
- } else
- printk(KERN_INFO "raid5: allocated %dkB for %s\n",
- memory, mdname(mddev));
-
if (mddev->degraded == 0)
printk("raid5: raid level %d set %s active with %d out of %d"
" devices, algorithm %d\n", conf->level, mdname(mddev),
@@ -4419,6 +4450,8 @@ static int run(mddev_t *mddev)
"raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ mddev->queue->queue_lock = &conf->device_lock;
+
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
@@ -4430,7 +4463,11 @@ static int run(mddev_t *mddev)
return 0;
abort:
+ if (mddev->thread)
+ md_unregister_thread(mddev->thread);
+ mddev->thread = NULL;
if (conf) {
+ shrink_stripes(conf);
print_raid5_conf(conf);
safe_put_page(conf->spare_page);
kfree(conf->disks);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 84456b1af20..c172371481c 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -386,6 +386,11 @@ struct raid5_private_data {
int pool_size; /* number of disks in stripeheads in pool */
spinlock_t device_lock;
struct disk_info *disks;
+
+ /* When taking over an array from a different personality, we store
+ * the new thread here until we fully activate the array.
+ */
+ struct mdk_thread_s *thread;
};
typedef struct raid5_private_data raid5_conf_t;
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-25 16:35:25 +0000