diff options
| -rw-r--r-- | drivers/ssb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ssb/driver_chipcommon.c | 14 | ||||
| -rw-r--r-- | drivers/ssb/driver_chipcommon_pmu.c | 508 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_driver_chipcommon.h | 224 |
4 files changed, 734 insertions, 13 deletions
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index 6f255e9c5af..cfbb74f2982 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o # built-in drivers ssb-y += driver_chipcommon.o +ssb-y += driver_chipcommon_pmu.o ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 571f4fd5523..9681536163c 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -26,19 +26,6 @@ enum ssb_clksrc { }; -static inline u32 chipco_read32(struct ssb_chipcommon *cc, - u16 offset) -{ - return ssb_read32(cc->dev, offset); -} - -static inline void chipco_write32(struct ssb_chipcommon *cc, - u16 offset, - u32 value) -{ - ssb_write32(cc->dev, offset, value); -} - static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset, u32 mask, u32 value) { @@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) return; /* We don't have a ChipCommon */ + ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); calc_fast_powerup_delay(cc); diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c new file mode 100644 index 00000000000..4aaddeec55a --- /dev/null +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -0,0 +1,508 @@ +/* + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * + * Copyright 2009, Michael Buesch <mb@bu3sch.de> + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include <linux/ssb/ssb.h> +#include <linux/ssb/ssb_regs.h> +#include <linux/ssb/ssb_driver_chipcommon.h> +#include <linux/delay.h> + +#include "ssb_private.h" + +static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset) +{ + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); + return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA); +} + +static void ssb_chipco_pll_write(struct ssb_chipcommon *cc, + u32 offset, u32 value) +{ + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset); + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); +} + +struct pmu0_plltab_entry { + u16 freq; /* Crystal frequency in kHz.*/ + u8 xf; /* Crystal frequency value for PMU control */ + u8 wb_int; + u32 wb_frac; +}; + +static const struct pmu0_plltab_entry pmu0_plltab[] = { + { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, }, + { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, }, + { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, }, + { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, }, + { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, }, + { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, }, + { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, }, + { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, }, + { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, }, + { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, }, + { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, }, + { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, }, + { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, }, + { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, }, +}; +#define SSB_PMU0_DEFAULT_XTALFREQ 20000 + +static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq) +{ + const struct pmu0_plltab_entry *e; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) { + e = &pmu0_plltab[i]; + if (e->freq == crystalfreq) + return e; + } + + return NULL; +} + +/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ +static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc, + u32 crystalfreq) +{ + struct ssb_bus *bus = cc->dev->bus; + const struct pmu0_plltab_entry *e = NULL; + u32 pmuctl, tmp, pllctl; + unsigned int i; + + if ((bus->chip_id == 0x5354) && !crystalfreq) { + /* The 5354 crystal freq is 25MHz */ + crystalfreq = 25000; + } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) + e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ); + BUG_ON(!e); + crystalfreq = e->freq; + cc->pmu.crystalfreq = e->freq; + + /* Check if the PLL already is programmed to this frequency. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { + /* We're already there... */ + return; + } + + ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", + (crystalfreq / 1000), (crystalfreq % 1000)); + + /* First turn the PLL off. */ + switch (bus->chip_id) { + case 0x4328: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, + ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, + ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + break; + case 0x5354: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, + ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, + ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + break; + default: + SSB_WARN_ON(1); + } + for (i = 1500; i; i--) { + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) + break; + udelay(10); + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) + ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); + + /* Set PDIV in PLL control 0. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); + if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ) + pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK; + else + pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK; + ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl); + + /* Set WILD in PLL control 1. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1); + pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD; + pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK); + pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK; + pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK; + if (e->wb_frac == 0) + pllctl |= SSB_PMU0_PLLCTL1_STOPMOD; + ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl); + + /* Set WILD in PLL control 2. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2); + pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI; + pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI; + ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl); + + /* Set the crystalfrequency and the divisor. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV; + pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) + & SSB_CHIPCO_PMU_CTL_ILP_DIV; + pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ; + pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; + chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); +} + +struct pmu1_plltab_entry { + u16 freq; /* Crystal frequency in kHz.*/ + u8 xf; /* Crystal frequency value for PMU control */ + u8 ndiv_int; + u32 ndiv_frac; + u8 p1div; + u8 p2div; +}; + +static const struct pmu1_plltab_entry pmu1_plltab[] = { + { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, }, + { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, }, + { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, }, + { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, }, + { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, }, + { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, }, + { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, }, + { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, }, + { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, }, + { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, }, + { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, }, + { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, }, + { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, }, + { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, }, + { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, }, +}; + +#define SSB_PMU1_DEFAULT_XTALFREQ 15360 + +static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq) +{ + const struct pmu1_plltab_entry *e; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) { + e = &pmu1_plltab[i]; + if (e->freq == crystalfreq) + return e; + } + + return NULL; +} + +/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ +static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc, + u32 crystalfreq) +{ + struct ssb_bus *bus = cc->dev->bus; + const struct pmu1_plltab_entry *e = NULL; + u32 buffer_strength = 0; + u32 tmp, pllctl, pmuctl; + unsigned int i; + + if (bus->chip_id == 0x4312) { + /* We do not touch the BCM4312 PLL and assume + * the default crystal settings work out-of-the-box. */ + cc->pmu.crystalfreq = 20000; + return; + } + + if (crystalfreq) + e = pmu1_plltab_find_entry(crystalfreq); + if (!e) + e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ); + BUG_ON(!e); + crystalfreq = e->freq; + cc->pmu.crystalfreq = e->freq; + + /* Check if the PLL already is programmed to this frequency. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { + /* We're already there... */ + return; + } + + ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", + (crystalfreq / 1000), (crystalfreq % 1000)); + + /* First turn the PLL off. */ + switch (bus->chip_id) { + case 0x4325: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, + ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | + (1 << SSB_PMURES_4325_HT_AVAIL))); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, + ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | + (1 << SSB_PMURES_4325_HT_AVAIL))); + /* Adjust the BBPLL to 2 on all channels later. */ + buffer_strength = 0x222222; + break; + default: + SSB_WARN_ON(1); + } + for (i = 1500; i; i--) { + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) + break; + udelay(10); + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) + ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); + + /* Set p1div and p2div. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); + pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV); + pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV; + pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl); + + /* Set ndiv int and ndiv mode */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2); + pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE); + pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT; + pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl); + + /* Set ndiv frac */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3); + pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC; + pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl); + + /* Change the drive strength, if required. */ + if (buffer_strength) { + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5); + pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV; + pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV; + ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl); + } + + /* Tune the crystalfreq and the divisor. */ + pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); + pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ); + pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) + & SSB_CHIPCO_PMU_CTL_ILP_DIV; + pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; + chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); +} + +static void ssb_pmu_pll_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { + /* TODO: The user may override the crystal frequency. */ + } + + switch (bus->chip_id) { + case 0x4312: + case 0x4325: + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: + case 0x5354: + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PLL init unknown for device %04X\n", + bus->chip_id); + } +} + +struct pmu_res_updown_tab_entry { + u8 resource; /* The resource number */ + u16 updown; /* The updown value */ +}; + +enum pmu_res_depend_tab_task { + PMU_RES_DEP_SET = 1, + PMU_RES_DEP_ADD, + PMU_RES_DEP_REMOVE, +}; + +struct pmu_res_depend_tab_entry { + u8 resource; /* The resource number */ + u8 task; /* SET | ADD | REMOVE */ + u32 depend; /* The depend mask */ +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = { + { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, + { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, + { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, }, + { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, }, + { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, }, + { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, + { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = { + { + /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */ + .resource = SSB_PMURES_4328_ILP_REQUEST, + .task = PMU_RES_DEP_SET, + .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | + (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)), + }, +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = { + { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = { + { + /* Adjust HT-Available dependencies. */ + .resource = SSB_PMURES_4325_HT_AVAIL, + .task = PMU_RES_DEP_ADD, + .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) | + (1 << SSB_PMURES_4325_TX_PWRSW_PU) | + (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) | + (1 << SSB_PMURES_4325_AFE_PWRSW_PU)), + }, +}; + +static void ssb_pmu_resources_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 min_msk = 0, max_msk = 0; + unsigned int i; + const struct pmu_res_updown_tab_entry *updown_tab = NULL; + unsigned int updown_tab_size; + const struct pmu_res_depend_tab_entry *depend_tab = NULL; + unsigned int depend_tab_size; + + switch (bus->chip_id) { + case 0x4312: + /* We keep the default settings: + * min_msk = 0xCBB + * max_msk = 0x7FFFF + */ + break; + case 0x4325: + /* Power OTP down later. */ + min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) | + (1 << SSB_PMURES_4325_LNLDO2_PU); + if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) & + SSB_CHIPCO_CHST_4325_PMUTOP_2B) + min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4325a0; + updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0); + depend_tab = pmu_res_depend_tab_4325a0; + depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0); + break; + case 0x4328: + min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | + (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) | + (1 << SSB_PMURES_4328_XTAL_EN); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4328a0; + updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0); + depend_tab = pmu_res_depend_tab_4328a0; + depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0); + break; + case 0x5354: + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + break; + default: + ssb_printk(KERN_ERR PFX + "ERROR: PMU resource config unknown for device %04X\n", + bus->chip_id); + } + + if (updown_tab) { + for (i = 0; i < updown_tab_size; i++) { + chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, + updown_tab[i].resource); + chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM, + updown_tab[i].updown); + } + } + if (depend_tab) { + for (i = 0; i < depend_tab_size; i++) { + chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL, + depend_tab[i].resource); + switch (depend_tab[i].task) { + case PMU_RES_DEP_SET: + chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, + depend_tab[i].depend); + break; + case PMU_RES_DEP_ADD: + chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, + depend_tab[i].depend); + break; + case PMU_RES_DEP_REMOVE: + chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK, + ~(depend_tab[i].depend)); + break; + default: + SSB_WARN_ON(1); + } + } + } + + /* Set the resource masks. */ + if (min_msk) + chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk); + if (max_msk) + chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); +} + +void ssb_pmu_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 pmucap; + + if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) + return; + + pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); + cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); + + ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", + cc->pmu.rev, pmucap); + + if (cc->pmu.rev >= 1) { + if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, + ~SSB_CHIPCO_PMU_CTL_NOILPONW); + } else { + chipco_set32(cc, SSB_CHIPCO_PMU_CTL, + SSB_CHIPCO_PMU_CTL_NOILPONW); + } + } + ssb_pmu_pll_init(cc); + ssb_pmu_resources_init(cc); +} diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 7d7e03dcf77..d3b1d18922f 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -181,6 +181,16 @@ #define SSB_CHIPCO_PROG_WAITCNT 0x0124 #define SSB_CHIPCO_FLASH_CFG 0x0128 #define SSB_CHIPCO_FLASH_WAITCNT 0x012C +#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ +#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 #define SSB_CHIPCO_UART0_FCR 0x0308 @@ -197,6 +207,196 @@ #define SSB_CHIPCO_UART1_LSR 0x0414 #define SSB_CHIPCO_UART1_MSR 0x0418 #define SSB_CHIPCO_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ +#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 +#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2 +#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */ +#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */ +#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */ +#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */ +#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650 +#define SSB_CHIPCO_CHIPCTL_DATA 0x0654 +#define SSB_CHIPCO_REGCTL_ADDR 0x0658 +#define SSB_CHIPCO_REGCTL_DATA 0x065C +#define SSB_CHIPCO_PLLCTL_ADDR 0x0660 +#define SSB_CHIPCO_PLLCTL_DATA 0x0664 + + + +/** PMU PLL registers */ + +/* PMU rev 0 PLL registers */ +#define SSB_PMU0_PLLCTL0 0 +#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001 +#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */ +#define SSB_PMU0_PLLCTL1 1 +#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */ +#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28 +#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */ +#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8 +#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */ +#define SSB_PMU0_PLLCTL2 2 +#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */ +#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0 + +/* PMU rev 1 PLL registers */ +#define SSB_PMU1_PLLCTL0 0 +#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */ +#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20 +#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */ +#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL1 1 +#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */ +#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0 +#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */ +#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8 +#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */ +#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16 +#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */ +#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL2 2 +#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */ +#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0 +#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */ +#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8 +#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */ +#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17 +#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */ +#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20 +#define SSB_PMU1_PLLCTL3 3 +#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */ +#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0 +#define SSB_PMU1_PLLCTL4 4 +#define SSB_PMU1_PLLCTL5 5 +#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */ +#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8 + +/* BCM4312 PLL resource numbers. */ +#define SSB_PMURES_4312_SWITCHER_BURST 0 +#define SSB_PMURES_4312_SWITCHER_PWM 1 +#define SSB_PMURES_4312_PA_REF_LDO 2 +#define SSB_PMURES_4312_CORE_LDO_BURST 3 +#define SSB_PMURES_4312_CORE_LDO_PWM 4 +#define SSB_PMURES_4312_RADIO_LDO 5 +#define SSB_PMURES_4312_ILP_REQUEST 6 +#define SSB_PMURES_4312_BG_FILTBYP 7 +#define SSB_PMURES_4312_TX_FILTBYP 8 +#define SSB_PMURES_4312_RX_FILTBYP 9 +#define SSB_PMURES_4312_XTAL_PU 10 +#define SSB_PMURES_4312_ALP_AVAIL 11 +#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 +#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 +#define SSB_PMURES_4312_HT_AVAIL 14 + +/* BCM4325 PLL resource numbers. */ +#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 +#define SSB_PMURES_4325_CBUCK_BURST 1 +#define SSB_PMURES_4325_CBUCK_PWM 2 +#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 +#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 +#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 +#define SSB_PMURES_4325_ILP_REQUEST 6 +#define SSB_PMURES_4325_ABUCK_BURST 7 +#define SSB_PMURES_4325_ABUCK_PWM 8 +#define SSB_PMURES_4325_LNLDO1_PU 9 +#define SSB_PMURES_4325_LNLDO2_PU 10 +#define SSB_PMURES_4325_LNLDO3_PU 11 +#define SSB_PMURES_4325_LNLDO4_PU 12 +#define SSB_PMURES_4325_XTAL_PU 13 +#define SSB_PMURES_4325_ALP_AVAIL 14 +#define SSB_PMURES_4325_RX_PWRSW_PU 15 +#define SSB_PMURES_4325_TX_PWRSW_PU 16 +#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 +#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 +#define SSB_PMURES_4325_AFE_PWRSW_PU 19 +#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 +#define SSB_PMURES_4325_HT_AVAIL 21 + +/* BCM4328 PLL resource numbers. */ +#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 +#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 +#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 +#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 +#define SSB_PMURES_4328_ILP_REQUEST 4 +#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 +#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 +#define SSB_PMURES_4328_ROM_SWITCH 7 +#define SSB_PMURES_4328_PA_REF_LDO 8 +#define SSB_PMURES_4328_RADIO_LDO 9 +#define SSB_PMURES_4328_AFE_LDO 10 +#define SSB_PMURES_4328_PLL_LDO 11 +#define SSB_PMURES_4328_BG_FILTBYP 12 +#define SSB_PMURES_4328_TX_FILTBYP 13 +#define SSB_PMURES_4328_RX_FILTBYP 14 +#define SSB_PMURES_4328_XTAL_PU 15 +#define SSB_PMURES_4328_XTAL_EN 16 +#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 +#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 +#define SSB_PMURES_4328_BB_PLL_PU 19 + +/* BCM5354 PLL resource numbers. */ +#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 +#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 +#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 +#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 +#define SSB_PMURES_5354_ILP_REQUEST 4 +#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 +#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 +#define SSB_PMURES_5354_ROM_SWITCH 7 +#define SSB_PMURES_5354_PA_REF_LDO 8 +#define SSB_PMURES_5354_RADIO_LDO 9 +#define SSB_PMURES_5354_AFE_LDO 10 +#define SSB_PMURES_5354_PLL_LDO 11 +#define SSB_PMURES_5354_BG_FILTBYP 12 +#define SSB_PMURES_5354_TX_FILTBYP 13 +#define SSB_PMURES_5354_RX_FILTBYP 14 +#define SSB_PMURES_5354_XTAL_PU 15 +#define SSB_PMURES_5354_XTAL_EN 16 +#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 +#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 +#define SSB_PMURES_5354_BB_PLL_PU 19 + + + +/** Chip specific Chip-Status register contents. */ +#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 +#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ +#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */ +#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ +#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004 +#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2 +#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008 +#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3 +#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0 +#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 +#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ @@ -353,11 +553,20 @@ struct ssb_device; struct ssb_serial_port; +/* Data for the PMU, if available. + * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU) + */ +struct ssb_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + struct ssb_chipcommon { struct ssb_device *dev; u32 capabilities; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; }; static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) @@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) return (cc->dev != NULL); } +/* Register access */ +#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset) +#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val) + +#define chipco_mask32(cc, offset, mask) \ + chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask)) +#define chipco_set32(cc, offset, set) \ + chipco_write32(cc, offset, chipco_read32(cc, offset) | (set)) +#define chipco_maskset32(cc, offset, mask, set) \ + chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set)) + extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); @@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, struct ssb_serial_port *ports); #endif /* CONFIG_SSB_SERIAL */ +/* PMU support */ +extern void ssb_pmu_init(struct ssb_chipcommon *cc); + + #endif /* LINUX_SSB_CHIPCO_H_ */ |