diff options
| -rw-r--r-- | drivers/acpi/sleep/main.c | 160 | ||||
| -rw-r--r-- | drivers/pci/pci-acpi.c | 28 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 8 | ||||
| -rw-r--r-- | drivers/pci/pci.h | 2 | ||||
| -rw-r--r-- | drivers/pnp/driver.c | 5 | ||||
| -rw-r--r-- | drivers/pnp/pnpacpi/core.c | 14 | ||||
| -rw-r--r-- | include/acpi/acpi_bus.h | 2 | ||||
| -rw-r--r-- | include/linux/pnp.h | 4 |
8 files changed, 181 insertions, 42 deletions
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 54c2dfcf865..ab21357c5c7 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -34,35 +34,55 @@ static u32 acpi_suspend_states[] = { static int init_8259A_after_S1; +extern int acpi_sleep_prepare(u32 acpi_state); +extern void acpi_power_off(void); + +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +/** + * acpi_pm_set_target - Set the target system sleep state to the state + * associated with given @pm_state, if supported. + */ + +static int acpi_pm_set_target(suspend_state_t pm_state) +{ + u32 acpi_state = acpi_suspend_states[pm_state]; + int error = 0; + + if (sleep_states[acpi_state]) { + acpi_target_sleep_state = acpi_state; + } else { + printk(KERN_ERR "ACPI does not support this state: %d\n", + pm_state); + error = -ENOSYS; + } + return error; +} + /** * acpi_pm_prepare - Do preliminary suspend work. - * @pm_state: suspend state we're entering. + * @pm_state: ignored * - * Make sure we support the state. If we do, and we need it, set the - * firmware waking vector and do arch-specific nastiness to get the - * wakeup code to the waking vector. + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. */ -extern int acpi_sleep_prepare(u32 acpi_state); -extern void acpi_power_off(void); - static int acpi_pm_prepare(suspend_state_t pm_state) { - u32 acpi_state = acpi_suspend_states[pm_state]; + int error = acpi_sleep_prepare(acpi_target_sleep_state); - if (!sleep_states[acpi_state]) { - printk("acpi_pm_prepare does not support %d \n", pm_state); - return -EPERM; - } - return acpi_sleep_prepare(acpi_state); + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + + return error; } /** * acpi_pm_enter - Actually enter a sleep state. - * @pm_state: State we're entering. + * @pm_state: ignored * - * Flush caches and go to sleep. For STR or STD, we have to call - * arch-specific assembly, which in turn call acpi_enter_sleep_state(). + * Flush caches and go to sleep. For STR we have to call arch-specific + * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ @@ -70,31 +90,31 @@ static int acpi_pm_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; unsigned long flags = 0; - u32 acpi_state = acpi_suspend_states[pm_state]; + u32 acpi_state = acpi_target_sleep_state; ACPI_FLUSH_CPU_CACHE(); /* Do arch specific saving of state. */ - if (pm_state > PM_SUSPEND_STANDBY) { + if (acpi_state == ACPI_STATE_S3) { int error = acpi_save_state_mem(); - if (error) + + if (error) { + acpi_target_sleep_state = ACPI_STATE_S0; return error; + } } local_irq_save(flags); acpi_enable_wakeup_device(acpi_state); - switch (pm_state) { - case PM_SUSPEND_STANDBY: + switch (acpi_state) { + case ACPI_STATE_S1: barrier(); status = acpi_enter_sleep_state(acpi_state); break; - case PM_SUSPEND_MEM: + case ACPI_STATE_S3: do_suspend_lowlevel(); break; - - default: - return -EINVAL; } /* ACPI 3.0 specs (P62) says that it's the responsabilty @@ -107,12 +127,8 @@ static int acpi_pm_enter(suspend_state_t pm_state) local_irq_restore(flags); printk(KERN_DEBUG "Back to C!\n"); - /* restore processor state - * We should only be here if we're coming back from STR or STD. - * And, in the case of the latter, the memory image should have already - * been loaded from disk. - */ - if (pm_state > PM_SUSPEND_STANDBY) + /* restore processor state */ + if (acpi_state == ACPI_STATE_S3) acpi_restore_state_mem(); return ACPI_SUCCESS(status) ? 0 : -EFAULT; @@ -120,7 +136,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) /** * acpi_pm_finish - Finish up suspend sequence. - * @pm_state: State we're coming out of. + * @pm_state: ignored * * This is called after we wake back up (or if entering the sleep state * failed). @@ -128,7 +144,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) static int acpi_pm_finish(suspend_state_t pm_state) { - u32 acpi_state = acpi_suspend_states[pm_state]; + u32 acpi_state = acpi_target_sleep_state; acpi_leave_sleep_state(acpi_state); acpi_disable_wakeup_device(acpi_state); @@ -136,6 +152,8 @@ static int acpi_pm_finish(suspend_state_t pm_state) /* reset firmware waking vector */ acpi_set_firmware_waking_vector((acpi_physical_address) 0); + acpi_target_sleep_state = ACPI_STATE_S0; + #ifdef CONFIG_X86 if (init_8259A_after_S1) { printk("Broken toshiba laptop -> kicking interrupts\n"); @@ -178,6 +196,7 @@ static int acpi_pm_state_valid(suspend_state_t pm_state) static struct pm_ops acpi_pm_ops = { .valid = acpi_pm_state_valid, + .set_target = acpi_pm_set_target, .prepare = acpi_pm_prepare, .enter = acpi_pm_enter, .finish = acpi_pm_finish, @@ -237,6 +256,81 @@ static struct hibernation_ops acpi_hibernation_ops = { }; #endif /* CONFIG_SOFTWARE_SUSPEND */ +/** + * acpi_pm_device_sleep_state - return preferred power state of ACPI device + * in the system sleep state given by %acpi_target_sleep_state + * @dev: device to examine + * @wake: if set, the device should be able to wake up the system + * @d_min_p: used to store the upper limit of allowed states range + * Return value: preferred power state of the device on success, -ENODEV on + * failure (ie. if there's no 'struct acpi_device' for @dev) + * + * Find the lowest power (highest number) ACPI device power state that + * device @dev can be in while the system is in the sleep state represented + * by %acpi_target_sleep_state. If @wake is nonzero, the device should be + * able to wake up the system from this sleep state. If @d_min_p is set, + * the highest power (lowest number) device power state of @dev allowed + * in this system sleep state is stored at the location pointed to by it. + * + * The caller must ensure that @dev is valid before using this function. + * The caller is also responsible for figuring out if the device is + * supposed to be able to wake up the system and passing this information + * via @wake. + */ + +int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(dev); + struct acpi_device *adev; + char acpi_method[] = "_SxD"; + unsigned long d_min, d_max; + + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_ERR "ACPI handle has no context!\n"); + return -ENODEV; + } + + acpi_method[2] = '0' + acpi_target_sleep_state; + /* + * If the sleep state is S0, we will return D3, but if the device has + * _S0W, we will use the value from _S0W + */ + d_min = ACPI_STATE_D0; + d_max = ACPI_STATE_D3; + + /* + * If present, _SxD methods return the minimum D-state (highest power + * state) we can use for the corresponding S-states. Otherwise, the + * minimum D-state is D0 (ACPI 3.x). + * + * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer + * provided -- that's our fault recovery, we ignore retval. + */ + if (acpi_target_sleep_state > ACPI_STATE_S0) + acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); + + /* + * If _PRW says we can wake up the system from the target sleep state, + * the D-state returned by _SxD is sufficient for that (we assume a + * wakeup-aware driver if wake is set). Still, if _SxW exists + * (ACPI 3.x), it should return the maximum (lowest power) D-state that + * can wake the system. _S0W may be valid, too. + */ + if (acpi_target_sleep_state == ACPI_STATE_S0 || + (wake && adev->wakeup.state.enabled && + adev->wakeup.sleep_state <= acpi_target_sleep_state)) { + acpi_method[3] = 'W'; + acpi_evaluate_integer(handle, acpi_method, NULL, &d_max); + /* Sanity check */ + if (d_max < d_min) + d_min = d_max; + } + + if (d_min_p) + *d_min_p = d_min; + return d_max; +} + /* * Toshiba fails to preserve interrupts over S1, reinitialization * of 8259 is needed after S1 resume. diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index c8062494009..67c63d1f158 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -245,16 +245,33 @@ EXPORT_SYMBOL(pci_osc_control_set); * currently we simply return _SxD, if present. */ -static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state) +static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, + pm_message_t state) { - /* TBD */ - - return -ENODEV; + int acpi_state; + + acpi_state = acpi_pm_device_sleep_state(&pdev->dev, + device_may_wakeup(&pdev->dev), NULL); + if (acpi_state < 0) + return PCI_POWER_ERROR; + + switch (acpi_state) { + case ACPI_STATE_D0: + return PCI_D0; + case ACPI_STATE_D1: + return PCI_D1; + case ACPI_STATE_D2: + return PCI_D2; + case ACPI_STATE_D3: + return PCI_D3hot; + } + return PCI_POWER_ERROR; } static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) { acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + acpi_handle tmp; static int state_conv[] = { [0] = 0, [1] = 1, @@ -266,6 +283,9 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (!handle) return -ENODEV; + /* If the ACPI device has _EJ0, ignore the device */ + if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) + return 0; return acpi_bus_set_power(handle, acpi_state); } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 03fd59e80fe..1458fd69e67 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -499,7 +499,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); +pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); /** * pci_choose_state - Choose the power state of a PCI device @@ -513,15 +513,15 @@ int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) { - int ret; + pci_power_t ret; if (!pci_find_capability(dev, PCI_CAP_ID_PM)) return PCI_D0; if (platform_pci_choose_state) { ret = platform_pci_choose_state(dev, state); - if (ret >= 0) - state.event = ret; + if (ret != PCI_POWER_ERROR) + return ret; } switch (state.event) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 3fec13d3add..c293ba1f274 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -13,7 +13,7 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t, resource_size_t), void *alignf_data); /* Firmware callbacks */ -extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); +extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index e161423b430..1432806451c 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -167,6 +167,8 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state) return error; } + if (pnp_dev->protocol && pnp_dev->protocol->suspend) + pnp_dev->protocol->suspend(pnp_dev, state); return 0; } @@ -179,6 +181,9 @@ static int pnp_bus_resume(struct device *dev) if (!pnp_drv) return 0; + if (pnp_dev->protocol && pnp_dev->protocol->resume) + pnp_dev->protocol->resume(pnp_dev); + if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) { error = pnp_start_dev(pnp_dev); if (error) diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index a00548799e9..c37a558ecd9 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -119,11 +119,25 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) return ACPI_FAILURE(status) ? -ENODEV : 0; } +static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state) +{ + return acpi_bus_set_power((acpi_handle)dev->data, + acpi_pm_device_sleep_state(&dev->dev, + device_may_wakeup(&dev->dev), NULL)); +} + +static int pnpacpi_resume(struct pnp_dev *dev) +{ + return acpi_bus_set_power((acpi_handle)dev->data, ACPI_STATE_D0); +} + static struct pnp_protocol pnpacpi_protocol = { .name = "Plug and Play ACPI", .get = pnpacpi_get_resources, .set = pnpacpi_set_resources, .disable = pnpacpi_disable_resources, + .suspend = pnpacpi_suspend, + .resume = pnpacpi_resume, }; static int __init pnpacpi_add_device(struct acpi_device *device) diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 5e3dcf3299b..a9f73efa01b 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -365,6 +365,8 @@ acpi_handle acpi_get_child(acpi_handle, acpi_integer); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle)) +int acpi_pm_device_sleep_state(struct device *, int, int *); + #endif /* CONFIG_ACPI */ #endif /*__ACPI_BUS_H__*/ diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 2a1897e6f93..66edb229318 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -335,6 +335,10 @@ struct pnp_protocol { int (*set)(struct pnp_dev *dev, struct pnp_resource_table *res); int (*disable)(struct pnp_dev *dev); + /* protocol specific suspend/resume */ + int (*suspend)(struct pnp_dev *dev, pm_message_t state); + int (*resume)(struct pnp_dev *dev); + /* used by pnp layer only (look but don't touch) */ unsigned char number; /* protocol number*/ struct device dev; /* link to driver model */ |