aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h98
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c20
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c12
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c8
5 files changed, 15 insertions, 127 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 421c6343e1c..757e31d6214 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -201,20 +201,7 @@ typedef struct srb {
/*
* SRB flag definitions
*/
-#define SRB_TIMEOUT BIT_0 /* Command timed out */
-#define SRB_DMA_VALID BIT_1 /* Command sent to ISP */
-#define SRB_WATCHDOG BIT_2 /* Command on watchdog list */
-#define SRB_ABORT_PENDING BIT_3 /* Command abort sent to device */
-
-#define SRB_ABORTED BIT_4 /* Command aborted command already */
-#define SRB_RETRY BIT_5 /* Command needs retrying */
-#define SRB_GOT_SENSE BIT_6 /* Command has sense data */
-#define SRB_FAILOVER BIT_7 /* Command in failover state */
-
-#define SRB_BUSY BIT_8 /* Command is in busy retry state */
-#define SRB_FO_CANCEL BIT_9 /* Command don't need to do failover */
-#define SRB_IOCTL BIT_10 /* IOCTL command. */
-#define SRB_TAPE BIT_11 /* FCP2 (Tape) command. */
+#define SRB_DMA_VALID BIT_0 /* Command sent to ISP */
/*
* ISP I/O Register Set structure definitions.
@@ -1570,39 +1557,13 @@ typedef struct fc_port {
#define FCS_DEVICE_DEAD 2
#define FCS_DEVICE_LOST 3
#define FCS_ONLINE 4
-#define FCS_NOT_SUPPORTED 5
-#define FCS_FAILOVER 6
-#define FCS_FAILOVER_FAILED 7
/*
* FC port flags.
*/
#define FCF_FABRIC_DEVICE BIT_0
#define FCF_LOGIN_NEEDED BIT_1
-#define FCF_FO_MASKED BIT_2
-#define FCF_FAILOVER_NEEDED BIT_3
-#define FCF_RESET_NEEDED BIT_4
-#define FCF_PERSISTENT_BOUND BIT_5
-#define FCF_TAPE_PRESENT BIT_6
-#define FCF_FARP_DONE BIT_7
-#define FCF_FARP_FAILED BIT_8
-#define FCF_FARP_REPLY_NEEDED BIT_9
-#define FCF_AUTH_REQ BIT_10
-#define FCF_SEND_AUTH_REQ BIT_11
-#define FCF_RECEIVE_AUTH_REQ BIT_12
-#define FCF_AUTH_SUCCESS BIT_13
-#define FCF_RLC_SUPPORT BIT_14
-#define FCF_CONFIG BIT_15 /* Needed? */
-#define FCF_RESCAN_NEEDED BIT_16
-#define FCF_XP_DEVICE BIT_17
-#define FCF_MSA_DEVICE BIT_18
-#define FCF_EVA_DEVICE BIT_19
-#define FCF_MSA_PORT_ACTIVE BIT_20
-#define FCF_FAILBACK_DISABLE BIT_21
-#define FCF_FAILOVER_DISABLE BIT_22
-#define FCF_DSXXX_DEVICE BIT_23
-#define FCF_AA_EVA_DEVICE BIT_24
-#define FCF_AA_MSA_DEVICE BIT_25
+#define FCF_TAPE_PRESENT BIT_2
/* No loop ID flag. */
#define FC_NO_LOOP_ID 0x1000
@@ -2257,7 +2218,6 @@ struct qla_hw_data {
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
- uint32_t vsan_enabled :1;
uint32_t npiv_supported :1;
uint32_t fce_enabled :1;
uint32_t fac_supported :1;
@@ -2302,7 +2262,6 @@ struct qla_hw_data {
uint16_t max_loop_id;
uint16_t fb_rev;
- uint16_t max_public_loop_ids;
uint16_t min_external_loopid; /* First external loop Id */
#define PORT_SPEED_UNKNOWN 0xFFFF
@@ -2458,15 +2417,6 @@ struct qla_hw_data {
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
- uint32_t mbx_flags;
-#define MBX_IN_PROGRESS BIT_0
-#define MBX_BUSY BIT_1 /* Got the Access */
-#define MBX_SLEEPING_ON_SEM BIT_2
-#define MBX_POLLING_FOR_COMP BIT_3
-#define MBX_COMPLETED BIT_4
-#define MBX_TIMEDOUT BIT_5
-#define MBX_ACCESS_TIMEDOUT BIT_6
-
/* Basic firmware related information. */
uint16_t fw_major_version;
uint16_t fw_minor_version;
@@ -2619,36 +2569,19 @@ typedef struct scsi_qla_host {
#define LOOP_RESYNC_ACTIVE 5
#define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
#define RSCN_UPDATE 7 /* Perform an RSCN update. */
-#define MAILBOX_RETRY 8
-#define ISP_RESET_NEEDED 9 /* Initiate a ISP reset. */
-#define FAILOVER_EVENT_NEEDED 10
-#define FAILOVER_EVENT 11
-#define FAILOVER_NEEDED 12
-#define SCSI_RESTART_NEEDED 13 /* Processes SCSI retry queue. */
-#define PORT_RESTART_NEEDED 14 /* Processes Retry queue. */
-#define RESTART_QUEUES_NEEDED 15 /* Restarts the Lun queue. */
-#define ABORT_QUEUES_NEEDED 16
-#define RELOGIN_NEEDED 17
-#define LOGIN_RETRY_NEEDED 18 /* Initiate required fabric logins. */
-#define REGISTER_FC4_NEEDED 19 /* SNS FC4 registration required. */
-#define ISP_ABORT_RETRY 20 /* ISP aborted. */
-#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */
-#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */
-#define IOCTL_ERROR_RECOVERY 23
-#define LOOP_RESET_NEEDED 24
-#define BEACON_BLINK_NEEDED 25
-#define REGISTER_FDMI_NEEDED 26
-#define FCPORT_UPDATE_NEEDED 27
-#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
-#define UNLOADING 29
-#define NPIV_CONFIG_NEEDED 30
+#define RELOGIN_NEEDED 8
+#define REGISTER_FC4_NEEDED 9 /* SNS FC4 registration required. */
+#define ISP_ABORT_RETRY 10 /* ISP aborted. */
+#define BEACON_BLINK_NEEDED 11
+#define REGISTER_FDMI_NEEDED 12
+#define FCPORT_UPDATE_NEEDED 13
+#define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */
+#define UNLOADING 15
+#define NPIV_CONFIG_NEEDED 16
uint32_t device_flags;
-#define DFLG_LOCAL_DEVICES BIT_0
-#define DFLG_RETRY_LOCAL_DEVICES BIT_1
-#define DFLG_FABRIC_DEVICES BIT_2
-#define SWITCH_FOUND BIT_3
-#define DFLG_NO_CABLE BIT_4
+#define SWITCH_FOUND BIT_0
+#define DFLG_NO_CABLE BIT_1
srb_t *status_srb; /* Status continuation entry. */
@@ -2761,10 +2694,5 @@ typedef struct scsi_qla_host {
#include "qla_inline.h"
#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
-#define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
-#define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
-#define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
-#define CMD_ACTUAL_SNSLEN(Cmnd) ((Cmnd)->SCp.Message)
-#define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
#endif
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a2747501fdd..d525808afc4 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -72,7 +72,6 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
vha->dpc_flags = 0;
vha->flags.management_server_logged_in = 0;
vha->marker_needed = 0;
- ha->mbx_flags = 0;
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
@@ -515,7 +514,6 @@ qla2x00_reset_chip(scsi_qla_host_t *vha)
static inline void
qla24xx_reset_risc(scsi_qla_host_t *vha)
{
- int hw_evt = 0;
unsigned long flags = 0;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
@@ -545,8 +543,6 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
barrier();
}
- if (cnt == 0)
- hw_evt = 1;
/* Wait for soft-reset to complete. */
d2 = RD_REG_DWORD(&reg->ctrl_status);
@@ -2011,7 +2007,6 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
fcport->port_type = FCT_UNKNOWN;
fcport->loop_id = FC_NO_LOOP_ID;
atomic_set(&fcport->state, FCS_UNCONFIGURED);
- fcport->flags = FCF_RLC_SUPPORT;
fcport->supported_classes = FC_COS_UNSPECIFIED;
return fcport;
@@ -2193,7 +2188,6 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
vha->host_no, fcport->loop_id));
atomic_set(&fcport->state, FCS_DEVICE_LOST);
- fcport->flags &= ~FCF_FARP_DONE;
}
}
@@ -2250,8 +2244,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
WWN_SIZE))
continue;
- fcport->flags &= ~(FCF_FABRIC_DEVICE |
- FCF_PERSISTENT_BOUND);
+ fcport->flags &= ~FCF_FABRIC_DEVICE;
fcport->loop_id = new_fcport->loop_id;
fcport->port_type = new_fcport->port_type;
fcport->d_id.b24 = new_fcport->d_id.b24;
@@ -2264,7 +2257,6 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
if (!found) {
/* New device, add to fcports list. */
- new_fcport->flags &= ~FCF_PERSISTENT_BOUND;
if (vha->vp_idx) {
new_fcport->vha = vha;
new_fcport->vp_idx = vha->vp_idx;
@@ -2297,11 +2289,6 @@ cleanup_allocation:
"rval=%x\n", vha->host_no, rval));
}
- if (found_devs) {
- vha->device_flags |= DFLG_LOCAL_DEVICES;
- vha->device_flags &= ~DFLG_RETRY_LOCAL_DEVICES;
- }
-
return (rval);
}
@@ -2787,7 +2774,6 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
fcport->loop_id = FC_NO_LOOP_ID;
fcport->flags |= (FCF_FABRIC_DEVICE |
FCF_LOGIN_NEEDED);
- fcport->flags &= ~FCF_PERSISTENT_BOUND;
break;
}
@@ -2830,9 +2816,6 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
kfree(swl);
kfree(new_fcport);
- if (!list_empty(new_fcports))
- vha->device_flags |= DFLG_FABRIC_DEVICES;
-
return (rval);
}
@@ -3015,7 +2998,6 @@ qla2x00_device_resync(scsi_qla_host_t *vha)
0, 0);
}
}
- fcport->flags &= ~FCF_FARP_DONE;
}
}
return (rval);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 8e91f4aec97..0f03812861b 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -852,9 +852,6 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
/* Free outstanding command slot. */
req->outstanding_cmds[index] = NULL;
- CMD_COMPL_STATUS(sp->cmd) = 0L;
- CMD_SCSI_STATUS(sp->cmd) = 0L;
-
/* Save ISP completion status */
sp->cmd->result = DID_OK << 16;
@@ -955,7 +952,6 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
if (sense_len >= SCSI_SENSE_BUFFERSIZE)
sense_len = SCSI_SENSE_BUFFERSIZE;
- CMD_ACTUAL_SNSLEN(cp) = sense_len;
sp->request_sense_length = sense_len;
sp->request_sense_ptr = cp->sense_buffer;
if (sp->request_sense_length > 32)
@@ -973,8 +969,7 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
cp->device->channel, cp->device->id, cp->device->lun, cp,
cp->serial_number));
if (sense_len)
- DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
- CMD_ACTUAL_SNSLEN(cp)));
+ DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, sense_len));
}
/**
@@ -1043,9 +1038,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
}
lscsi_status = scsi_status & STATUS_MASK;
- CMD_ENTRY_STATUS(cp) = sts->entry_status;
- CMD_COMPL_STATUS(cp) = comp_status;
- CMD_SCSI_STATUS(cp) = scsi_status;
fcport = sp->fcport;
@@ -1104,7 +1096,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
resid = resid_len;
scsi_set_resid(cp, resid);
- CMD_RESID_LEN(cp) = resid;
if (!lscsi_status &&
((unsigned)(scsi_bufflen(cp) - resid) <
@@ -1160,7 +1151,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
if (scsi_status & SS_RESIDUAL_UNDER) {
scsi_set_resid(cp, resid);
- CMD_RESID_LEN(cp) = resid;
} else {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d) UNDERRUN status detected "
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index dc5e5d9530c..7af9bd73a10 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1197,10 +1197,6 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
fcport->d_id.b.al_pa = pd->port_id[2];
fcport->d_id.b.rsvd_1 = 0;
- /* Check for device require authentication. */
- pd->common_features & BIT_5 ? (fcport->flags |= FCF_AUTH_REQ) :
- (fcport->flags &= ~FCF_AUTH_REQ);
-
/* If not target must be initiator or unknown type. */
if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0)
fcport->port_type = FCT_INITIATOR;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1c3d165c035..ba3309f8556 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2856,19 +2856,11 @@ qla2x00_timer(scsi_qla_host_t *vha)
spin_unlock_irqrestore(&ha->hardware_lock,
cpu_flags);
}
- set_bit(ABORT_QUEUES_NEEDED, &vha->dpc_flags);
start_dpc++;
}
/* if the loop has been down for 4 minutes, reinit adapter */
if (atomic_dec_and_test(&vha->loop_down_timer) != 0) {
- DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
- "restarting queues.\n",
- vha->host_no));
-
- set_bit(RESTART_QUEUES_NEEDED, &vha->dpc_flags);
- start_dpc++;
-
if (!(vha->device_flags & DFLG_NO_CABLE) &&
!vha->vp_idx) {
DEBUG(printk("scsi(%ld): Loop down - "