diff options
860 files changed, 19714 insertions, 9660 deletions
diff --git a/.gitignore b/.gitignore index cecb3b040cc..b93fb7eff94 100644 --- a/.gitignore +++ b/.gitignore @@ -27,6 +27,7 @@ *.gz *.lzma *.patch +*.gcno # # Top-level generic files diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt index e8ca040ba2c..2d735b0ae38 100644 --- a/Documentation/block/data-integrity.txt +++ b/Documentation/block/data-integrity.txt @@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata scatter-gather lists. The controller will interleave the buffers on write and split them on -read. This means that the Linux can DMA the data buffers to and from +read. This means that Linux can DMA the data buffers to and from host memory without changes to the page cache. Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs @@ -66,7 +66,7 @@ software RAID5). The IP checksum is weaker than the CRC in terms of detecting bit errors. However, the strength is really in the separation of the data -buffers and the integrity metadata. These two distinct buffers much +buffers and the integrity metadata. These two distinct buffers must match up for an I/O to complete. The separation of the data and integrity metadata buffers as well as diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index f9ca389dddf..1d7e9784439 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -777,6 +777,18 @@ in cpuset directories: # /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4 # /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4 +To add a CPU to a cpuset, write the new list of CPUs including the +CPU to be added. To add 6 to the above cpuset: + +# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6 + +Similarly to remove a CPU from a cpuset, write the new list of CPUs +without the CPU to be removed. + +To remove all the CPUs: + +# /bin/echo "" > cpus -> clear cpus list + 2.3 Setting flags ----------------- diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index a52adfc9a57..3d1b0ab70c8 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -25,7 +25,7 @@ use IO::Handle; "tda10046lifeview", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", - "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" ); + "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" ); # Check args syntax() if (scalar(@ARGV) != 1); @@ -381,6 +381,57 @@ sub cx18 { $allfiles; } +sub mpc718 { + my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip'; + my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive"; + my $fwfile = "dvb-cx18-mpc718-mt352.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + wgetfile($archive, $url); + unzip($archive, $tmpdir); + + my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys"; + my $found = 0; + + open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n"; + binmode IN; + open OUT, '>', $fwfile; + binmode OUT; + { + # Block scope because we change the line terminator variable $/ + my $prevlen = 0; + my $currlen; + + # Buried in the data segment are 3 runs of almost identical + # register-value pairs that end in 0x5d 0x01 which is a "TUNER GO" + # command for the MT352. + # Pull out the middle run (because it's easy) of register-value + # pairs to make the "firmware" file. + + local $/ = "\x5d\x01"; # MT352 "TUNER GO" + + while (<IN>) { + $currlen = length($_); + if ($prevlen == $currlen && $currlen <= 64) { + chop; chop; # Get rid of "TUNER GO" + s/^\0\0//; # get rid of leading 00 00 if it's there + printf OUT "$_"; + $found = 1; + last; + } + $prevlen = $currlen; + } + } + close OUT; + close IN; + if (!$found) { + unlink $fwfile; + die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n"; + } + $fwfile; +} + sub cx23885 { my $url = "http://linuxtv.org/downloads/firmware/"; diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f8cd450be9a..09e031c5588 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -458,3 +458,13 @@ Why: Remove the old legacy 32bit machine check code. This has been but the old version has been kept around for easier testing. Note this doesn't impact the old P5 and WinChip machine check handlers. Who: Andi Kleen <andi@firstfloor.org> + +---------------------------- + +What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be + exported interface anymore. +When: 2.6.33 +Why: cpu_policy_rwsem has a new cleaner definition making it local to + cpufreq core and contained inside cpufreq.c. Other dependent + drivers should not use it in order to safely avoid lockdep issues. +Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt index e716aadb3a3..40ec6335276 100644 --- a/Documentation/gcov.txt +++ b/Documentation/gcov.txt @@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the corresponding Makefile. +Problem: Files copied from sysfs appear empty or incomplete. +Cause: Due to the way seq_file works, some tools such as cp or tar + may not correctly copy files from sysfs. +Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links. + Alternatively use the mechanism shown in Appendix B. + Appendix A: gather_on_build.sh ============================== Sample script to gather coverage meta files on the build machine (see 6a): - #!/bin/bash KSRC=$1 @@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh Sample script to gather coverage data files on the test machine (see 6b): -#!/bin/bash +#!/bin/bash -e DEST=$1 GCDA=/sys/kernel/debug/gcov @@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then exit 1 fi -find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T - +TEMPDIR=$(mktemp -d) +echo Collecting data.. +find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \; +find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \; +find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \; +tar czf $DEST -C $TEMPDIR sys +rm -rf $TEMPDIR -if [ $? -eq 0 ] ; then - echo "$DEST successfully created, copy to build system and unpack with:" - echo " tar xfz $DEST" -else - echo "Could not create file $DEST" -fi +echo "$DEST successfully created, copy to build system and unpack with:" +echo " tar xfz $DEST" diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d08759aa090..d77fbd8b79a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1915,6 +1915,12 @@ and is between 256 and 4096 characters. It is defined in the file Format: { 0 | 1 } See arch/parisc/kernel/pdc_chassis.c + percpu_alloc= [X86] Select which percpu first chunk allocator to use. + Allowed values are one of "lpage", "embed" and "4k". + See comments in arch/x86/kernel/setup_percpu.c for + details on each allocator. This parameter is primarily + for debugging and performance comparison. + pf. [PARIDE] See Documentation/blockdev/paride.txt. @@ -2467,7 +2473,8 @@ and is between 256 and 4096 characters. It is defined in the file tp720= [HW,PS2] - trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size. + trace_buf_size=nn[KMG] + [FTRACE] will set tracing buffer size. trix= [HW,OSS] MediaTrix AudioTrix Pro Format: diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index 0112da3b9ab..89068030b01 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -16,13 +16,17 @@ Usage ----- CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel -thread scans the memory every 10 minutes (by default) and prints any new -unreferenced objects found. To trigger an intermediate scan and display -all the possible memory leaks: +thread scans the memory every 10 minutes (by default) and prints the +number of new unreferenced objects found. To display the details of all +the possible memory leaks: # mount -t debugfs nodev /sys/kernel/debug/ # cat /sys/kernel/debug/kmemleak +To trigger an intermediate memory scan: + + # echo scan > /sys/kernel/debug/kmemleak + Note that the orphan objects are listed in the order they were allocated and one object at the beginning of the list may cause other subsequent objects to be reported as orphan. @@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the /sys/kernel/debug/kmemleak file. The following parameters are supported: off - disable kmemleak (irreversible) - stack=on - enable the task stacks scanning + stack=on - enable the task stacks scanning (default) stack=off - disable the tasks stacks scanning - scan=on - start the automatic memory scanning thread + scan=on - start the automatic memory scanning thread (default) scan=off - stop the automatic memory scanning thread - scan=<secs> - set the automatic memory scanning period in seconds (0 - to disable it) + scan=<secs> - set the automatic memory scanning period in seconds + (default 600, 0 to stop the automatic scanning) + scan - trigger a memory scan Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on the kernel command line. +Memory may be allocated or freed before kmemleak is initialised and +these actions are stored in an early log buffer. The size of this buffer +is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option. + Basic Algorithm --------------- diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt new file mode 100644 index 00000000000..c6eda18b15e --- /dev/null +++ b/Documentation/leds-lp3944.txt @@ -0,0 +1,50 @@ +Kernel driver lp3944 +==================== + + * National Semiconductor LP3944 Fun-light Chip + Prefix: 'lp3944' + Addresses scanned: None (see the Notes section below) + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/pf/LP/LP3944.html + +Authors: + Antonio Ospite <ospite@studenti.unina.it> + + +Description +----------- +The LP3944 is a helper chip that can drive up to 8 leds, with two programmable +DIM modes; it could even be used as a gpio expander but this driver assumes it +is used as a led controller. + +The DIM modes are used to set _blink_ patterns for leds, the pattern is +specified supplying two parameters: + - period: from 0s to 1.6s + - duty cycle: percentage of the period the led is on, from 0 to 100 + +Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern. +See the datasheet for details. + +LP3944 can be found on Motorola A910 smartphone, where it drives the rgb +leds, the camera flash light and the lcds power. + + +Notes +----- +The chip is used mainly in embedded contexts, so this driver expects it is +registered using the i2c_board_info mechanism. + +To register the chip at address 0x60 on adapter 0, set the platform data +according to include/linux/leds-lp3944.h, set the i2c board info: + + static struct i2c_board_info __initdata a910_i2c_board_info[] = { + { + I2C_BOARD_INFO("lp3944", 0x60), + .platform_data = &a910_lp3944_leds, + }, + }; + +and register it in the platform init function + + i2c_register_board_info(0, a910_i2c_board_info, + ARRAY_SIZE(a910_i2c_board_info)); diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 8d999d862d0..79f533f38c6 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1238,1122 +1238,7 @@ descriptions for the SOC devices for which new nodes have been defined; this list will expand as more and more SOC-containing platforms are moved over to use the flattened-device-tree model. - a) PHY nodes - - Required properties: - - - device_type : Should be "ethernet-phy" - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - reg : The ID number for the phy, usually a small integer - - linux,phandle : phandle for this node; likely referenced by an - ethernet controller node. - - - Example: - - ethernet-phy@0 { - linux,phandle = <2452000> - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - - - b) Interrupt controllers - - Some SOC devices contain interrupt controllers that are different - from the standard Open PIC specification. The SOC device nodes for - these types of controllers should be specified just like a standard - OpenPIC controller. Sense and level information should be encoded - as specified in section 2) of this chapter for each device that - specifies an interrupt. - - Example : - - pic@40000 { - linux,phandle = <40000>; - interrupt-controller; - #address-cells = <0>; - reg = <40000 40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - c) 4xx/Axon EMAC ethernet nodes - - The EMAC ethernet controller in IBM and AMCC 4xx chips, and also - the Axon bridge. To operate this needs to interact with a ths - special McMAL DMA controller, and sometimes an RGMII or ZMII - interface. In addition to the nodes and properties described - below, the node for the OPB bus on which the EMAC sits must have a - correct clock-frequency property. - - i) The EMAC node itself - - Required properties: - - device_type : "network" - - - compatible : compatible list, contains 2 entries, first is - "ibm,emac-CHIP" where CHIP is the host ASIC (440gx, - 405gp, Axon) and second is either "ibm,emac" or - "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon", - "ibm,emac4" - - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ> - - interrupt-parent : optional, if needed for interrupt mapping - - reg : <registers mapping> - - local-mac-address : 6 bytes, MAC address - - mal-device : phandle of the associated McMAL node - - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated - with this EMAC - - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated - with this EMAC - - cell-index : 1 cell, hardware index of the EMAC cell on a given - ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on - each Axon chip) - - max-frame-size : 1 cell, maximum frame size supported in bytes - - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec - operations. - For Axon, 2048 - - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec - operations. - For Axon, 2048. - - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate - thresholds). - For Axon, 0x00000010 - - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds) - in bytes. - For Axon, 0x00000100 (I think ...) - - phy-mode : string, mode of operations of the PHY interface. - Supported values are: "mii", "rmii", "smii", "rgmii", - "tbi", "gmii", rtbi", "sgmii". - For Axon on CAB, it is "rgmii" - - mdio-device : 1 cell, required iff using shared MDIO registers - (440EP). phandle of the EMAC to use to drive the - MDIO lines for the PHY used by this EMAC. - - zmii-device : 1 cell, required iff connected to a ZMII. phandle of - the ZMII device node - - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII - channel or 0xffffffff if ZMII is only used for MDIO. - - rgmii-device : 1 cell, required iff connected to an RGMII. phandle - of the RGMII device node. - For Axon: phandle of plb5/plb4/opb/rgmii - - rgmii-channel : 1 cell, required iff connected to an RGMII. Which - RGMII channel is used by this EMAC. - Fox Axon: present, whatever value is appropriate for each - EMAC, that is the content of the current (bogus) "phy-port" - property. - - Optional properties: - - phy-address : 1 cell, optional, MDIO address of the PHY. If absent, - a search is performed. - - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY - for, used if phy-address is absent. bit 0x00000001 is - MDIO address 0. - For Axon it can be absent, though my current driver - doesn't handle phy-address yet so for now, keep - 0x00ffffff in it. - - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec - operations (if absent the value is the same as - rx-fifo-size). For Axon, either absent or 2048. - - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec - operations (if absent the value is the same as - tx-fifo-size). For Axon, either absent or 2048. - - tah-device : 1 cell, optional. If connected to a TAH engine for - offload, phandle of the TAH device node. - - tah-channel : 1 cell, optional. If appropriate, channel used on the - TAH engine. - - Example: - - EMAC0: ethernet@40000800 { - device_type = "network"; - compatible = "ibm,emac-440gp", "ibm,emac"; - interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <40000800 70>; - local-mac-address = [00 04 AC E3 1B 1E]; - mal-device = <&MAL0>; - mal-tx-channel = <0 1>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; - phy-mode = "rmii"; - phy-map = <00000001>; - zmii-device = <&ZMII0>; - zmii-channel = <0>; - }; - - ii) McMAL node - - Required properties: - - device_type : "dma-controller" - - compatible : compatible list, containing 2 entries, first is - "ibm,mcmal-CHIP" where CHIP is the host ASIC (like - emac) and the second is either "ibm,mcmal" or - "ibm,mcmal2". - For Axon, "ibm,mcmal-axon","ibm,mcmal2" - - interrupts : <interrupt mapping for the MAL interrupts sources: - 5 sources: tx_eob, rx_eob, serr, txde, rxde>. - For Axon: This is _different_ from the current - firmware. We use the "delayed" interrupts for txeob - and rxeob. Thus we end up with mapping those 5 MPIC - interrupts, all level positive sensitive: 10, 11, 32, - 33, 34 (in decimal) - - dcr-reg : < DCR registers range > - - dcr-parent : if needed for dcr-reg - - num-tx-chans : 1 cell, number of Tx channels - - num-rx-chans : 1 cell, number of Rx channels - - iii) ZMII node - - Required properties: - - compatible : compatible list, containing 2 entries, first is - "ibm,zmii-CHIP" where CHIP is the host ASIC (like - EMAC) and the second is "ibm,zmii". - For Axon, there is no ZMII node. - - reg : <registers mapping> - - iv) RGMII node - - Required properties: - - compatible : compatible list, containing 2 entries, first is - "ibm,rgmii-CHIP" where CHIP is the host ASIC (like - EMAC) and the second is "ibm,rgmii". - For Axon, "ibm,rgmii-axon","ibm,rgmii" - - reg : <registers mapping> - - revision : as provided by the RGMII new version register if - available. - For Axon: 0x0000012a - - d) Xilinx IP cores - - The Xilinx EDK toolchain ships with a set of IP cores (devices) for use - in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range - of standard device types (network, serial, etc.) and miscellaneous - devices (gpio, LCD, spi, etc). Also, since these devices are - implemented within the fpga fabric every instance of the device can be - synthesised with different options that change the behaviour. - - Each IP-core has a set of parameters which the FPGA designer can use to - control how the core is synthesized. Historically, the EDK tool would - extract the device parameters relevant to device drivers and copy them - into an 'xparameters.h' in the form of #define symbols. This tells the - device drivers how the IP cores are configured, but it requres the kernel - to be recompiled every time the FPGA bitstream is resynthesized. - - The new approach is to export the parameters into the device tree and - generate a new device tree each time the FPGA bitstream changes. The - parameters which used to be exported as #defines will now become - properties of the device node. In general, device nodes for IP-cores - will take the following form: - - (name): (generic-name)@(base-address) { - compatible = "xlnx,(ip-core-name)-(HW_VER)" - [, (list of compatible devices), ...]; - reg = <(baseaddr) (size)>; - interrupt-parent = <&interrupt-controller-phandle>; - interrupts = < ... >; - xlnx,(parameter1) = "(string-value)"; - xlnx,(parameter2) = <(int-value)>; - }; - - (generic-name): an open firmware-style name that describes the - generic class of device. Preferably, this is one word, such - as 'serial' or 'ethernet'. - (ip-core-name): the name of the ip block (given after the BEGIN - directive in system.mhs). Should be in lowercase - and all underscores '_' converted to dashes '-'. - (name): is derived from the "PARAMETER INSTANCE" value. - (parameter#): C_* parameters from system.mhs. The C_ prefix is - dropped from the parameter name, the name is converted - to lowercase and all underscore '_' characters are - converted to dashes '-'. - (baseaddr): the baseaddr parameter value (often named C_BASEADDR). - (HW_VER): from the HW_VER parameter. - (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). - - Typically, the compatible list will include the exact IP core version - followed by an older IP core version which implements the same - interface or any other device with the same interface. - - 'reg', 'interrupt-parent' and 'interrupts' are all optional properties. - - For example, the following block from system.mhs: - - BEGIN opb_uartlite - PARAMETER INSTANCE = opb_uartlite_0 - PARAMETER HW_VER = 1.00.b - PARAMETER C_BAUDRATE = 115200 - PARAMETER C_DATA_BITS = 8 - PARAMETER C_ODD_PARITY = 0 - PARAMETER C_USE_PARITY = 0 - PARAMETER C_CLK_FREQ = 50000000 - PARAMETER C_BASEADDR = 0xEC100000 - PARAMETER C_HIGHADDR = 0xEC10FFFF - BUS_INTERFACE SOPB = opb_7 - PORT OPB_Clk = CLK_50MHz - PORT Interrupt = opb_uartlite_0_Interrupt - PORT RX = opb_uartlite_0_RX - PORT TX = opb_uartlite_0_TX - PORT OPB_Rst = sys_bus_reset_0 - END - - becomes the following device tree node: - - opb_uartlite_0: serial@ec100000 { - device_type = "serial"; - compatible = "xlnx,opb-uartlite-1.00.b"; - reg = <ec100000 10000>; - interrupt-parent = <&opb_intc_0>; - interrupts = <1 0>; // got this from the opb_intc parameters - current-speed = <d#115200>; // standard serial device prop - clock-frequency = <d#50000000>; // standard serial device prop - xlnx,data-bits = <8>; - xlnx,odd-parity = <0>; - xlnx,use-parity = <0>; - }; - - Some IP cores actually implement 2 or more logical devices. In - this case, the device should still describe the whole IP core with - a single node and add a child node for each logical device. The - ranges property can be used to translate from parent IP-core to the - registers of each device. In addition, the parent node should be - compatible with the bus type 'xlnx,compound', and should contain - #address-cells and #size-cells, as with any other bus. (Note: this - makes the assumption that both logical devices have the same bus - binding. If this is not true, then separate nodes should be used - for each logical device). The 'cell-index' property can be used to - enumerate logical devices within an IP core. For example, the - following is the system.mhs entry for the dual ps2 controller found - on the ml403 reference design. - - BEGIN opb_ps2_dual_ref - PARAMETER INSTANCE = opb_ps2_dual_ref_0 - PARAMETER HW_VER = 1.00.a - PARAMETER C_BASEADDR = 0xA9000000 - PARAMETER C_HIGHADDR = 0xA9001FFF - BUS_INTERFACE SOPB = opb_v20_0 - PORT Sys_Intr1 = ps2_1_intr - PORT Sys_Intr2 = ps2_2_intr - PORT Clkin1 = ps2_clk_rx_1 - PORT Clkin2 = ps2_clk_rx_2 - PORT Clkpd1 = ps2_clk_tx_1 - PORT Clkpd2 = ps2_clk_tx_2 - PORT Rx1 = ps2_d_rx_1 - PORT Rx2 = ps2_d_rx_2 - PORT Txpd1 = ps2_d_tx_1 - PORT Txpd2 = ps2_d_tx_2 - END - - It would result in the following device tree nodes: - - opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ranges = <0 a9000000 2000>; - // If this device had extra parameters, then they would - // go here. - ps2@0 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <0 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - ps2@1000 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <1000 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - }; - - Also, the system.mhs file defines bus attachments from the processor - to the devices. The device tree structure should reflect the bus - attachments. Again an example; this system.mhs fragment: - - BEGIN ppc405_virtex4 - PARAMETER INSTANCE = ppc405_0 - PARAMETER HW_VER = 1.01.a - BUS_INTERFACE DPLB = plb_v34_0 - BUS_INTERFACE IPLB = plb_v34_0 - END - - BEGIN opb_intc - PARAMETER INSTANCE = opb_intc_0 - PARAMETER HW_VER = 1.00.c - PARAMETER C_BASEADDR = 0xD1000FC0 - PARAMETER C_HIGHADDR = 0xD1000FDF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN opb_uart16550 - PARAMETER INSTANCE = opb_uart16550_0 - PARAMETER HW_VER = 1.00.d - PARAMETER C_BASEADDR = 0xa0000000 - PARAMETER C_HIGHADDR = 0xa0001FFF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN plb_v34 - PARAMETER INSTANCE = plb_v34_0 - PARAMETER HW_VER = 1.02.a - END - - BEGIN plb_bram_if_cntlr - PARAMETER INSTANCE = plb_bram_if_cntlr_0 - PARAMETER HW_VER = 1.00.b - PARAMETER C_BASEADDR = 0xFFFF0000 - PARAMETER C_HIGHADDR = 0xFFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - END - - BEGIN plb2opb_bridge - PARAMETER INSTANCE = plb2opb_bridge_0 - PARAMETER HW_VER = 1.01.a - PARAMETER C_RNG0_BASEADDR = 0x20000000 - PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF - PARAMETER C_RNG1_BASEADDR = 0x60000000 - PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF - PARAMETER C_RNG2_BASEADDR = 0x80000000 - PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF - PARAMETER C_RNG3_BASEADDR = 0xC0000000 - PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - BUS_INTERFACE MOPB = opb_v20_0 - END - - Gives this device tree (some properties removed for clarity): - - plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v34-1.02.a"; - device_type = "ibm,plb"; - ranges; // 1:1 translation - - plb_bram_if_cntrl_0: bram@ffff0000 { - reg = <ffff0000 10000>; - } - - opb@20000000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <20000000 20000000 20000000 - 60000000 60000000 20000000 - 80000000 80000000 40000000 - c0000000 c0000000 20000000>; - - opb_uart16550_0: serial@a0000000 { - reg = <a00000000 2000>; - }; - - opb_intc_0: interrupt-controller@d1000fc0 { - reg = <d1000fc0 20>; - }; - }; - }; - - That covers the general approach to binding xilinx IP cores into the - device tree. The following are bindings for specific devices: - - i) Xilinx ML300 Framebuffer - - Simple framebuffer device from the ML300 reference design (also on the - ML403 reference design as well as others). - - Optional properties: - - resolution = <xres yres> : pixel resolution of framebuffer. Some - implementations use a different resolution. - Default is <d#640 d#480> - - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory. - Default is <d#1024 d#480>. - - rotate-display (empty) : rotate display 180 degrees. - - ii) Xilinx SystemACE - - The Xilinx SystemACE device is used to program FPGAs from an FPGA - bitstream stored on a CF card. It can also be used as a generic CF - interface device. - - Optional properties: - - 8-bit (empty) : Set this property for SystemACE in 8 bit mode - - iii) Xilinx EMAC and Xilinx TEMAC - - Xilinx Ethernet devices. In addition to general xilinx properties - listed above, nodes for these devices should include a phy-handle - property, and may include other common network device properties - like local-mac-address. - - iv) Xilinx Uartlite - - Xilinx uartlite devices are simple fixed speed serial ports. - - Required properties: - - current-speed : Baud rate of uartlite - - v) Xilinx hwicap - - Xilinx hwicap devices provide access to the configuration logic - of the FPGA through the Internal Configuration Access Port - (ICAP). The ICAP enables partial reconfiguration of the FPGA, - readback of the configuration information, and some control over - 'warm boots' of the FPGA fabric. - - Required properties: - - xlnx,family : The family of the FPGA, necessary since the - capabilities of the underlying ICAP hardware - differ between different families. May be - 'virtex2p', 'virtex4', or 'virtex5'. - - vi) Xilinx Uart 16550 - - Xilinx UART 16550 devices are very similar to the NS16550 but with - different register spacing and an offset from the base address. - - Required properties: - - clock-frequency : Frequency of the clock input - - reg-offset : A value of 3 is required - - reg-shift : A value of 2 is required - - e) USB EHCI controllers - - Required properties: - - compatible : should be "usb-ehci". - - reg : should contain at least address and length of the standard EHCI - register set for the device. Optional platform-dependent registers - (debug-port or other) can be also specified here, but only after - definition of standard EHCI registers. - - interrupts : one EHCI interrupt should be described here. - If device registers are implemented in big endian mode, the device - node should have "big-endian-regs" property. - If controller implementation operates with big endian descriptors, - "big-endian-desc" property should be specified. - If both big endian registers and descriptors are used by the controller - implementation, "big-endian" property can be specified instead of having - both "big-endian-regs" and "big-endian-desc". - - Example (Sequoia 440EPx): - ehci@e0000300 { - compatible = "ibm,usb-ehci-440epx", "usb-ehci"; - interrupt-parent = <&UIC0>; - interrupts = <1a 4>; - reg = <0 e0000300 90 0 e0000390 70>; - big-endian; - }; - - f) MDIO on GPIOs - - Currently defined compatibles: - - virtual,gpio-mdio - - MDC and MDIO lines connected to GPIO controllers are listed in the - gpios property as described in section VIII.1 in the following order: - - MDC, MDIO. - - Example: - - mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qe_pio_a 11 - &qe_pio_c 6>; - }; - - g) SPI (Serial Peripheral Interface) busses - - SPI busses can be described with a node for the SPI master device - and a set of child nodes for each SPI slave on the bus. For this - discussion, it is assumed that the system's SPI controller is in - SPI master mode. This binding does not describe SPI controllers - in slave mode. - - The SPI master node requires the following properties: - - #address-cells - number of cells required to define a chip select - address on the SPI bus. - - #size-cells - should be zero. - - compatible - name of SPI bus controller following generic names - recommended practice. - No other properties are required in the SPI bus node. It is assumed - that a driver for an SPI bus device will understand that it is an SPI bus. - However, the binding does not attempt to define the specific method for - assigning chip select numbers. Since SPI chip select configuration is - flexible and non-standardized, it is left out of this binding with the - assumption that board specific platform code will be used to manage - chip selects. Individual drivers can define additional properties to - support describing the chip select layout. - - SPI slave nodes must be children of the SPI master node and can - contain the following properties. - - reg - (required) chip select address of device. - - compatible - (required) name of SPI device following generic names - recommended practice - - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz - - spi-cpol - (optional) Empty property indicating device requires - inverse clock polarity (CPOL) mode - - spi-cpha - (optional) Empty property indicating device requires - shifted clock phase (CPHA) mode - - spi-cs-high - (optional) Empty property indicating device requires - chip select active high - - SPI example for an MPC5200 SPI bus: - spi@f00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; - - ethernet-switch@0 { - compatible = "micrel,ks8995m"; - spi-max-frequency = <1000000>; - reg = <0>; - }; - - codec@1 { - compatible = "ti,tlv320aic26"; - spi-max-frequency = <100000>; - reg = <1>; - }; - }; - -VII - Marvell Discovery mv64[345]6x System Controller chips -=========================================================== - -The Marvell mv64[345]60 series of system controller chips contain -many of the peripherals needed to implement a complete computer -system. In this section, we define device tree nodes to describe -the system controller chip itself and each of the peripherals -which it contains. Compatible string values for each node are -prefixed with the string "marvell,", for Marvell Technology Group Ltd. - -1) The /system-controller node - - This node is used to represent the system-controller and must be - present when the system uses a system controller chip. The top-level - system-controller node contains information that is global to all - devices within the system controller chip. The node name begins - with "system-controller" followed by the unit address, which is - the base address of the memory-mapped register set for the system - controller chip. - - Required properties: - - - ranges : Describes the translation of system controller addresses - for memory mapped registers. - - clock-frequency: Contains the main clock frequency for the system - controller chip. - - reg : This property defines the address and size of the - memory-mapped registers contained within the system controller - chip. The address specified in the "reg" property should match - the unit address of the system-controller node. - - #address-cells : Address representation for system controller - devices. This field represents the number of cells needed to - represent the address of the memory-mapped registers of devices - within the system controller chip. - - #size-cells : Size representation for for the memory-mapped - registers within the system controller chip. - - #interrupt-cells : Defines the width of cells used to represent - interrupts. - - Optional properties: - - - model : The specific model of the system controller chip. Such - as, "mv64360", "mv64460", or "mv64560". - - compatible : A string identifying the compatibility identifiers - of the system controller chip. - - The system-controller node contains child nodes for each system - controller device that the platform uses. Nodes should not be created - for devices which exist on the system controller chip but are not used - - Example Marvell Discovery mv64360 system-controller node: - - system-controller@f1000000 { /* Marvell Discovery mv64360 */ - #address-cells = <1>; - #size-cells = <1>; - model = "mv64360"; /* Default */ - compatible = "marvell,mv64360"; - clock-frequency = <133333333>; - reg = <0xf1000000 0x10000>; - virtual-reg = <0xf1000000>; - ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ - 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ - 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ - 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ - 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ - - [ child node definitions... ] - } - -2) Child nodes of /system-controller - - a) Marvell Discovery MDIO bus - - The MDIO is a bus to which the PHY devices are connected. For each - device that exists on this bus, a child node should be created. See - the definition of the PHY node below for an example of how to define - a PHY. - - Required properties: - - #address-cells : Should be <1> - - #size-cells : Should be <0> - - device_type : Should be "mdio" - - compatible : Should be "marvell,mv64360-mdio" - - Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - device_type = "mdio"; - compatible = "marvell,mv64360-mdio"; - - ethernet-phy@0 { - ...... - }; - }; - - - b) Marvell Discovery ethernet controller - - The Discover ethernet controller is described with two levels - of nodes. The first level describes an ethernet silicon block - and the second level describes up to 3 ethernet nodes within - that block. The reason for the multiple levels is that the - registers for the node are interleaved within a single set - of registers. The "ethernet-block" level describes the - shared register set, and the "ethernet" nodes describe ethernet - port-specific properties. - - Ethernet block node - - Required properties: - - #address-cells : <1> - - #size-cells : <0> - - compatible : "marvell,mv64360-eth-block" - - reg : Offset and length of the register set for this block - - Example Discovery Ethernet block node: - ethernet-block@2000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,mv64360-eth-block"; - reg = <0x2000 0x2000>; - ethernet@0 { - ....... - }; - }; - - Ethernet port node - - Required properties: - - device_type : Should be "network". - - compatible : Should be "marvell,mv64360-eth". - - reg : Should be <0>, <1>, or <2>, according to which registers - within the silicon block the device uses. - - interrupts : <a> where a is the interrupt number for the port. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - phy : the phandle for the PHY connected to this ethernet - controller. - - local-mac-address : 6 bytes, MAC address - - Example Discovery Ethernet port node: - ethernet@0 { - device_type = "network"; - compatible = "marvell,mv64360-eth"; - reg = <0>; - interrupts = <32>; - interrupt-parent = <&PIC>; - phy = <&PHY0>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - - - - c) Marvell Discovery PHY nodes - - Required properties: - - device_type : Should be "ethernet-phy" - - interrupts : <a> where a is the interrupt number for this phy. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - reg : The ID number for the phy, usually a small integer - - Example Discovery PHY node: - ethernet-phy@1 { - device_type = "ethernet-phy"; - compatible = "broadcom,bcm5421"; - interrupts = <76>; /* GPP 12 */ - interrupt-parent = <&PIC>; - reg = <1>; - }; - - - d) Marvell Discovery SDMA nodes - - Represent DMA hardware associated with the MPSC (multiprotocol - serial controllers). - - Required properties: - - compatible : "marvell,mv64360-sdma" - - reg : Offset and length of the register set for this device - - interrupts : <a> where a is the interrupt number for the DMA - device. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery SDMA node: - sdma@4000 { - compatible = "marvell,mv64360-sdma"; - reg = <0x4000 0xc18>; - virtual-reg = <0xf1004000>; - interrupts = <36>; - interrupt-parent = <&PIC>; - }; - - - e) Marvell Discovery BRG nodes - - Represent baud rate generator hardware associated with the MPSC - (multiprotocol serial controllers). - - Required properties: - - compatible : "marvell,mv64360-brg" - - reg : Offset and length of the register set for this device - - clock-src : A value from 0 to 15 which selects the clock - source for the baud rate generator. This value corresponds - to the CLKS value in the BRGx configuration register. See - the mv64x60 User's Manual. - - clock-frequence : The frequency (in Hz) of the baud rate - generator's input clock. - - current-speed : The current speed setting (presumably by - firmware) of the baud rate generator. - - Example Discovery BRG node: - brg@b200 { - compatible = "marvell,mv64360-brg"; - reg = <0xb200 0x8>; - clock-src = <8>; - clock-frequency = <133333333>; - current-speed = <9600>; - }; - - - f) Marvell Discovery CUNIT nodes - - Represent the Serial Communications Unit device hardware. - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery CUNIT node: - cunit@f200 { - reg = <0xf200 0x200>; - }; - - - g) Marvell Discovery MPSCROUTING nodes - - Represent the Discovery's MPSC routing hardware - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery CUNIT node: - mpscrouting@b500 { - reg = <0xb400 0xc>; - }; - - - h) Marvell Discovery MPSCINTR nodes - - Represent the Discovery's MPSC DMA interrupt hardware registers - (SDMA cause and mask registers). - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery MPSCINTR node: - mpsintr@b800 { - reg = <0xb800 0x100>; - }; - - - i) Marvell Discovery MPSC nodes - - Represent the Discovery's MPSC (Multiprotocol Serial Controller) - serial port. - - Required properties: - - device_type : "serial" - - compatible : "marvell,mv64360-mpsc" - - reg : Offset and length of the register set for this device - - sdma : the phandle for the SDMA node used by this port - - brg : the phandle for the BRG node used by this port - - cunit : the phandle for the CUNIT node used by this port - - mpscrouting : the phandle for the MPSCROUTING node used by this port - - mpscintr : the phandle for the MPSCINTR node used by this port - - cell-index : the hardware index of this cell in the MPSC core - - max_idle : value needed for MPSC CHR3 (Maximum Frame Length) - register - - interrupts : <a> where a is the interrupt number for the MPSC. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery MPSCINTR node: - mpsc@8000 { - device_type = "serial"; - compatible = "marvell,mv64360-mpsc"; - reg = <0x8000 0x38>; - virtual-reg = <0xf1008000>; - sdma = <&SDMA0>; - brg = <&BRG0>; - cunit = <&CUNIT>; - mpscrouting = <&MPSCROUTING>; - mpscintr = <&MPSCINTR>; - cell-index = <0>; - max_idle = <40>; - interrupts = <40>; - interrupt-parent = <&PIC>; - }; - - - j) Marvell Discovery Watch Dog Timer nodes - - Represent the Discovery's watchdog timer hardware - - Required properties: - - compatible : "marvell,mv64360-wdt" - - reg : Offset and length of the register set for this device - - Example Discovery Watch Dog Timer node: - wdt@b410 { - compatible = "marvell,mv64360-wdt"; - reg = <0xb410 0x8>; - }; - - - k) Marvell Discovery I2C nodes - - Represent the Discovery's I2C hardware - - Required properties: - - device_type : "i2c" - - compatible : "marvell,mv64360-i2c" - - reg : Offset and length of the register set for this device - - interrupts : <a> where a is the interrupt number for the I2C. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery I2C node: - compatible = "marvell,mv64360-i2c"; - reg = <0xc000 0x20>; - virtual-reg = <0xf100c000>; - interrupts = <37>; - interrupt-parent = <&PIC>; - }; - - - l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes - - Represent the Discovery's PIC hardware - - Required properties: - - #interrupt-cells : <1> - - #address-cells : <0> - - compatible : "marvell,mv64360-pic" - - reg : Offset and length of the register set for this device - - interrupt-controller - - Example Discovery PIC node: - pic { - #interrupt-cells = <1>; - #address-cells = <0>; - compatible = "marvell,mv64360-pic"; - reg = <0x0 0x88>; - interrupt-controller; - }; - - - m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes - - Represent the Discovery's MPP hardware - - Required properties: - - compatible : "marvell,mv64360-mpp" - - reg : Offset and length of the register set for this device - - Example Discovery MPP node: - mpp@f000 { - compatible = "marvell,mv64360-mpp"; - reg = <0xf000 0x10>; - }; - - - n) Marvell Discovery GPP (General Purpose Pins) nodes - - Represent the Discovery's GPP hardware - - Required properties: - - compatible : "marvell,mv64360-gpp" - - reg : Offset and length of the register set for this device - - Example Discovery GPP node: - gpp@f000 { - compatible = "marvell,mv64360-gpp"; - reg = <0xf100 0x20>; - }; - - - o) Marvell Discovery PCI host bridge node - - Represents the Discovery's PCI host bridge device. The properties - for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE - 1275-1994. A typical value for the compatible property is - "marvell,mv64360-pci". - - Example Discovery PCI host bridge node - pci@80000000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "marvell,mv64360-pci"; - reg = <0xcf8 0x8>; - ranges = <0x01000000 0x0 0x0 - 0x88000000 0x0 0x01000000 - 0x02000000 0x0 0x80000000 - 0x80000000 0x0 0x08000000>; - bus-range = <0 255>; - clock-frequency = <66000000>; - interrupt-parent = <&PIC>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0a */ - 0x5000 0 0 1 &PIC 80 - 0x5000 0 0 2 &PIC 81 - 0x5000 0 0 3 &PIC 91 - 0x5000 0 0 4 &PIC 93 - - /* IDSEL 0x0b */ - 0x5800 0 0 1 &PIC 91 - 0x5800 0 0 2 &PIC 93 - 0x5800 0 0 3 &PIC 80 - 0x5800 0 0 4 &PIC 81 - - /* IDSEL 0x0c */ - 0x6000 0 0 1 &PIC 91 - 0x6000 0 0 2 &PIC 93 - 0x6000 0 0 3 &PIC 80 - 0x6000 0 0 4 &PIC 81 - - /* IDSEL 0x0d */ - 0x6800 0 0 1 &PIC 93 - 0x6800 0 0 2 &PIC 80 - 0x6800 0 0 3 &PIC 81 - 0x6800 0 0 4 &PIC 91 - >; - }; - - - p) Marvell Discovery CPU Error nodes - - Represent the Discovery's CPU error handler device. - - Required properties: - - compatible : "marvell,mv64360-cpu-error" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery CPU Error node: - cpu-error@0070 { - compatible = "marvell,mv64360-cpu-error"; - reg = <0x70 0x10 0x128 0x28>; - interrupts = <3>; - interrupt-parent = <&PIC>; - }; - - - q) Marvell Discovery SRAM Controller nodes - - Represent the Discovery's SRAM controller device. - - Required properties: - - compatible : "marvell,mv64360-sram-ctrl" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery SRAM Controller node: - sram-ctrl@0380 { - compatible = "marvell,mv64360-sram-ctrl"; - reg = <0x380 0x80>; - interrupts = <13>; - interrupt-parent = <&PIC>; - }; - - - r) Marvell Discovery PCI Error Handler nodes - - Represent the Discovery's PCI error handler device. - - Required properties: - - compatible : "marvell,mv64360-pci-error" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery PCI Error Handler node: - pci-error@1d40 { - compatible = "marvell,mv64360-pci-error"; - reg = <0x1d40 0x40 0xc28 0x4>; - interrupts = <12>; - interrupt-parent = <&PIC>; - }; - - - s) Marvell Discovery Memory Controller nodes - - Represent the Discovery's memory controller device. - - Required properties: - - compatible : "marvell,mv64360-mem-ctrl" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery Memory Controller node: - mem-ctrl@1400 { - compatible = "marvell,mv64360-mem-ctrl"; - reg = <0x1400 0x60>; - interrupts = <17>; - interrupt-parent = <&PIC>; - }; - - -VIII - Specifying interrupt information for devices +VII - Specifying interrupt information for devices =================================================== The device tree represents the busses and devices of a hardware @@ -2439,56 +1324,7 @@ encodings listed below: 2 = high to low edge sensitive type enabled 3 = low to high edge sensitive type enabled -IX - Specifying GPIO information for devices -============================================ - -1) gpios property ------------------ - -Nodes that makes use of GPIOs should define them using `gpios' property, -format of which is: <&gpio-controller1-phandle gpio1-specifier - &gpio-controller2-phandle gpio2-specifier - 0 /* holes are permitted, means no GPIO 3 */ - &gpio-controller4-phandle gpio4-specifier - ...>; - -Note that gpio-specifier length is controller dependent. - -gpio-specifier may encode: bank, pin position inside the bank, -whether pin is open-drain and whether pin is logically inverted. - -Example of the node using GPIOs: - - node { - gpios = <&qe_pio_e 18 0>; - }; - -In this example gpio-specifier is "18 0" and encodes GPIO pin number, -and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller. - -2) gpio-controller nodes ------------------------- - -Every GPIO controller node must have #gpio-cells property defined, -this information will be used to translate gpio-specifiers. - -Example of two SOC GPIO banks defined as gpio-controller nodes: - - qe_pio_a: gpio-controller@1400 { - #gpio-cells = <2>; - compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank"; - reg = <0x1400 0x18>; - gpio-controller; - }; - - qe_pio_e: gpio-controller@1460 { - #gpio-cells = <2>; - compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank"; - reg = <0x1460 0x18>; - gpio-controller; - }; - -X - Specifying Device Power Management Information (sleep property) +VIII - Specifying Device Power Management Information (sleep property) =================================================================== Devices on SOCs often have mechanisms for placing devices into low-power diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt new file mode 100644 index 00000000000..2161334a7ca --- /dev/null +++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt @@ -0,0 +1,148 @@ + 4xx/Axon EMAC ethernet nodes + + The EMAC ethernet controller in IBM and AMCC 4xx chips, and also + the Axon bridge. To operate this needs to interact with a ths + special McMAL DMA controller, and sometimes an RGMII or ZMII + interface. In addition to the nodes and properties described + below, the node for the OPB bus on which the EMAC sits must have a + correct clock-frequency property. + + i) The EMAC node itself + + Required properties: + - device_type : "network" + + - compatible : compatible list, contains 2 entries, first is + "ibm,emac-CHIP" where CHIP is the host ASIC (440gx, + 405gp, Axon) and second is either "ibm,emac" or + "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon", + "ibm,emac4" + - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ> + - interrupt-parent : optional, if needed for interrupt mapping + - reg : <registers mapping> + - local-mac-address : 6 bytes, MAC address + - mal-device : phandle of the associated McMAL node + - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated + with this EMAC + - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated + with this EMAC + - cell-index : 1 cell, hardware index of the EMAC cell on a given + ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on + each Axon chip) + - max-frame-size : 1 cell, maximum frame size supported in bytes + - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec + operations. + For Axon, 2048 + - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec + operations. + For Axon, 2048. + - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate + thresholds). + For Axon, 0x00000010 + - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds) + in bytes. + For Axon, 0x00000100 (I think ...) + - phy-mode : string, mode of operations of the PHY interface. + Supported values are: "mii", "rmii", "smii", "rgmii", + "tbi", "gmii", rtbi", "sgmii". + For Axon on CAB, it is "rgmii" + - mdio-device : 1 cell, required iff using shared MDIO registers + (440EP). phandle of the EMAC to use to drive the + MDIO lines for the PHY used by this EMAC. + - zmii-device : 1 cell, required iff connected to a ZMII. phandle of + the ZMII device node + - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII + channel or 0xffffffff if ZMII is only used for MDIO. + - rgmii-device : 1 cell, required iff connected to an RGMII. phandle + of the RGMII device node. + For Axon: phandle of plb5/plb4/opb/rgmii + - rgmii-channel : 1 cell, required iff connected to an RGMII. Which + RGMII channel is used by this EMAC. + Fox Axon: present, whatever value is appropriate for each + EMAC, that is the content of the current (bogus) "phy-port" + property. + + Optional properties: + - phy-address : 1 cell, optional, MDIO address of the PHY. If absent, + a search is performed. + - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY + for, used if phy-address is absent. bit 0x00000001 is + MDIO address 0. + For Axon it can be absent, though my current driver + doesn't handle phy-address yet so for now, keep + 0x00ffffff in it. + - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec + operations (if absent the value is the same as + rx-fifo-size). For Axon, either absent or 2048. + - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec + operations (if absent the value is the same as + tx-fifo-size). For Axon, either absent or 2048. + - tah-device : 1 cell, optional. If connected to a TAH engine for + offload, phandle of the TAH device node. + - tah-channel : 1 cell, optional. If appropriate, channel used on the + TAH engine. + + Example: + + EMAC0: ethernet@40000800 { + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <40000800 70>; + local-mac-address = [00 04 AC E3 1B 1E]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + ii) McMAL node + + Required properties: + - device_type : "dma-controller" + - compatible : compatible list, containing 2 entries, first is + "ibm,mcmal-CHIP" where CHIP is the host ASIC (like + emac) and the second is either "ibm,mcmal" or + "ibm,mcmal2". + For Axon, "ibm,mcmal-axon","ibm,mcmal2" + - interrupts : <interrupt mapping for the MAL interrupts sources: + 5 sources: tx_eob, rx_eob, serr, txde, rxde>. + For Axon: This is _different_ from the current + firmware. We use the "delayed" interrupts for txeob + and rxeob. Thus we end up with mapping those 5 MPIC + interrupts, all level positive sensitive: 10, 11, 32, + 33, 34 (in decimal) + - dcr-reg : < DCR registers range > + - dcr-parent : if needed for dcr-reg + - num-tx-chans : 1 cell, number of Tx channels + - num-rx-chans : 1 cell, number of Rx channels + + iii) ZMII node + + Required properties: + - compatible : compatible list, containing 2 entries, first is + "ibm,zmii-CHIP" where CHIP is the host ASIC (like + EMAC) and the second is "ibm,zmii". + For Axon, there is no ZMII node. + - reg : <registers mapping> + + iv) RGMII node + + Required properties: + - compatible : compatible list, containing 2 entries, first is + "ibm,rgmii-CHIP" where CHIP is the host ASIC (like + EMAC) and the second is "ibm,rgmii". + For Axon, "ibm,rgmii-axon","ibm,rgmii" + - reg : <registers mapping> + - revision : as provided by the RGMII new version register if + available. + For Axon: 0x0000012a + diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt new file mode 100644 index 00000000000..edaa84d288a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt @@ -0,0 +1,50 @@ +Specifying GPIO information for devices +============================================ + +1) gpios property +----------------- + +Nodes that makes use of GPIOs should define them using `gpios' property, +format of which is: <&gpio-controller1-phandle gpio1-specifier + &gpio-controller2-phandle gpio2-specifier + 0 /* holes are permitted, means no GPIO 3 */ + &gpio-controller4-phandle gpio4-specifier + ...>; + +Note that gpio-specifier length is controller dependent. + +gpio-specifier may encode: bank, pin position inside the bank, +whether pin is open-drain and whether pin is logically inverted. + +Example of the node using GPIOs: + + node { + gpios = <&qe_pio_e 18 0>; + }; + +In this example gpio-specifier is "18 0" and encodes GPIO pin number, +and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller. + +2) gpio-controller nodes +------------------------ + +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +Example of two SOC GPIO banks defined as gpio-controller nodes: + + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; + + diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt index 4fe14deedc0..064db928c3c 100644 --- a/Documentation/powerpc/dts-bindings/gpio/led.txt +++ b/Documentation/powerpc/dts-bindings/gpio/led.txt @@ -16,10 +16,17 @@ LED sub-node properties: string defining the trigger assigned to the LED. Current triggers are: "backlight" - LED will act as a back-light, controlled by the framebuffer system - "default-on" - LED will turn on + "default-on" - LED will turn on, but see "default-state" below "heartbeat" - LED "double" flashes at a load average based rate "ide-disk" - LED indicates disk activity "timer" - LED flashes at a fixed, configurable rate +- default-state: (optional) The initial state of the LED. Valid + values are "on", "off", and "keep". If the LED is already on or off + and the default-state property is set the to same value, then no + glitch should be produced where the LED momentarily turns off (or + on). The "keep" setting will keep the LED at whatever its current + state is, without producing a glitch. The default is off if this + property is not present. Examples: @@ -30,14 +37,22 @@ leds { gpios = <&mcu_pio 0 1>; /* Active low */ linux,default-trigger = "ide-disk"; }; + + fault { + gpios = <&mcu_pio 1 0>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + }; }; run-control { compatible = "gpio-leds"; red { gpios = <&mpc8572 6 0>; + default-state = "off"; }; green { gpios = <&mpc8572 7 0>; + default-state = "on"; }; } diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt new file mode 100644 index 00000000000..bc954952901 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt @@ -0,0 +1,19 @@ +MDIO on GPIOs + +Currently defined compatibles: +- virtual,gpio-mdio + +MDC and MDIO lines connected to GPIO controllers are listed in the +gpios property as described in section VIII.1 in the following order: + +MDC, MDIO. + +Example: + +mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qe_pio_a 11 + &qe_pio_c 6>; +}; diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt new file mode 100644 index 00000000000..3708a2fd474 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/marvell.txt @@ -0,0 +1,521 @@ +Marvell Discovery mv64[345]6x System Controller chips +=========================================================== + +The Marvell mv64[345]60 series of system controller chips contain +many of the peripherals needed to implement a complete computer +system. In this section, we define device tree nodes to describe +the system controller chip itself and each of the peripherals +which it contains. Compatible string values for each node are +prefixed with the string "marvell,", for Marvell Technology Group Ltd. + +1) The /system-controller node + + This node is used to represent the system-controller and must be + present when the system uses a system controller chip. The top-level + system-controller node contains information that is global to all + devices within the system controller chip. The node name begins + with "system-controller" followed by the unit address, which is + the base address of the memory-mapped register set for the system + controller chip. + + Required properties: + + - ranges : Describes the translation of system controller addresses + for memory mapped registers. + - clock-frequency: Contains the main clock frequency for the system + controller chip. + - reg : This property defines the address and size of the + memory-mapped registers contained within the system controller + chip. The address specified in the "reg" property should match + the unit address of the system-controller node. + - #address-cells : Address representation for system controller + devices. This field represents the number of cells needed to + represent the address of the memory-mapped registers of devices + within the system controller chip. + - #size-cells : Size representation for for the memory-mapped + registers within the system controller chip. + - #interrupt-cells : Defines the width of cells used to represent + interrupts. + + Optional properties: + + - model : The specific model of the system controller chip. Such + as, "mv64360", "mv64460", or "mv64560". + - compatible : A string identifying the compatibility identifiers + of the system controller chip. + + The system-controller node contains child nodes for each system + controller device that the platform uses. Nodes should not be created + for devices which exist on the system controller chip but are not used + + Example Marvell Discovery mv64360 system-controller node: + + system-controller@f1000000 { /* Marvell Discovery mv64360 */ + #address-cells = <1>; + #size-cells = <1>; + model = "mv64360"; /* Default */ + compatible = "marvell,mv64360"; + clock-frequency = <133333333>; + reg = <0xf1000000 0x10000>; + virtual-reg = <0xf1000000>; + ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ + 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ + 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ + 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ + + [ child node definitions... ] + } + +2) Child nodes of /system-controller + + a) Marvell Discovery MDIO bus + + The MDIO is a bus to which the PHY devices are connected. For each + device that exists on this bus, a child node should be created. See + the definition of the PHY node below for an example of how to define + a PHY. + + Required properties: + - #address-cells : Should be <1> + - #size-cells : Should be <0> + - device_type : Should be "mdio" + - compatible : Should be "marvell,mv64360-mdio" + + Example: + + mdio { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "marvell,mv64360-mdio"; + + ethernet-phy@0 { + ...... + }; + }; + + + b) Marvell Discovery ethernet controller + + The Discover ethernet controller is described with two levels + of nodes. The first level describes an ethernet silicon block + and the second level describes up to 3 ethernet nodes within + that block. The reason for the multiple levels is that the + registers for the node are interleaved within a single set + of registers. The "ethernet-block" level describes the + shared register set, and the "ethernet" nodes describe ethernet + port-specific properties. + + Ethernet block node + + Required properties: + - #address-cells : <1> + - #size-cells : <0> + - compatible : "marvell,mv64360-eth-block" + - reg : Offset and length of the register set for this block + + Example Discovery Ethernet block node: + ethernet-block@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-block"; + reg = <0x2000 0x2000>; + ethernet@0 { + ....... + }; + }; + + Ethernet port node + + Required properties: + - device_type : Should be "network". + - compatible : Should be "marvell,mv64360-eth". + - reg : Should be <0>, <1>, or <2>, according to which registers + within the silicon block the device uses. + - interrupts : <a> where a is the interrupt number for the port. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + - phy : the phandle for the PHY connected to this ethernet + controller. + - local-mac-address : 6 bytes, MAC address + + Example Discovery Ethernet port node: + ethernet@0 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + + + c) Marvell Discovery PHY nodes + + Required properties: + - device_type : Should be "ethernet-phy" + - interrupts : <a> where a is the interrupt number for this phy. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - reg : The ID number for the phy, usually a small integer + + Example Discovery PHY node: + ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "broadcom,bcm5421"; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <1>; + }; + + + d) Marvell Discovery SDMA nodes + + Represent DMA hardware associated with the MPSC (multiprotocol + serial controllers). + + Required properties: + - compatible : "marvell,mv64360-sdma" + - reg : Offset and length of the register set for this device + - interrupts : <a> where a is the interrupt number for the DMA + device. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery SDMA node: + sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xf1004000>; + interrupts = <36>; + interrupt-parent = <&PIC>; + }; + + + e) Marvell Discovery BRG nodes + + Represent baud rate generator hardware associated with the MPSC + (multiprotocol serial controllers). + + Required properties: + - compatible : "marvell,mv64360-brg" + - reg : Offset and length of the register set for this device + - clock-src : A value from 0 to 15 which selects the clock + source for the baud rate generator. This value corresponds + to the CLKS value in the BRGx configuration register. See + the mv64x60 User's Manual. + - clock-frequence : The frequency (in Hz) of the baud rate + generator's input clock. + - current-speed : The current speed setting (presumably by + firmware) of the baud rate generator. + + Example Discovery BRG node: + brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; + clock-src = <8>; + clock-frequency = <133333333>; + current-speed = <9600>; + }; + + + f) Marvell Discovery CUNIT nodes + + Represent the Serial Communications Unit device hardware. + + Required properties: + - reg : Offset and length of the register set for this device + + Example Discovery CUNIT node: + cunit@f200 { + reg = <0xf200 0x200>; + }; + + + g) Marvell Discovery MPSCROUTING nodes + + Represent the Discovery's MPSC routing hardware + + Required properties: + - reg : Offset and length of the register set for this device + + Example Discovery CUNIT node: + mpscrouting@b500 { + reg = <0xb400 0xc>; + }; + + + h) Marvell Discovery MPSCINTR nodes + + Represent the Discovery's MPSC DMA interrupt hardware registers + (SDMA cause and mask registers). + + Required properties: + - reg : Offset and length of the register set for this device + + Example Discovery MPSCINTR node: + mpsintr@b800 { + reg = <0xb800 0x100>; + }; + + + i) Marvell Discovery MPSC nodes + + Represent the Discovery's MPSC (Multiprotocol Serial Controller) + serial port. + + Required properties: + - device_type : "serial" + - compatible : "marvell,mv64360-mpsc" + - reg : Offset and length of the register set for this device + - sdma : the phandle for the SDMA node used by this port + - brg : the phandle for the BRG node used by this port + - cunit : the phandle for the CUNIT node used by this port + - mpscrouting : the phandle for the MPSCROUTING node used by this port + - mpscintr : the phandle for the MPSCINTR node used by this port + - cell-index : the hardware index of this cell in the MPSC core + - max_idle : value needed for MPSC CHR3 (Maximum Frame Length) + register + - interrupts : <a> where a is the interrupt number for the MPSC. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery MPSCINTR node: + mpsc@8000 { + device_type = "serial"; + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xf1008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + max_idle = <40>; + interrupts = <40>; + interrupt-parent = <&PIC>; + }; + + + j) Marvell Discovery Watch Dog Timer nodes + + Represent the Discovery's watchdog timer hardware + + Required properties: + - compatible : "marvell,mv64360-wdt" + - reg : Offset and length of the register set for this device + + Example Discovery Watch Dog Timer node: + wdt@b410 { + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; + }; + + + k) Marvell Discovery I2C nodes + + Represent the Discovery's I2C hardware + + Required properties: + - device_type : "i2c" + - compatible : "marvell,mv64360-i2c" + - reg : Offset and length of the register set for this device + - interrupts : <a> where a is the interrupt number for the I2C. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery I2C node: + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xf100c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; + }; + + + l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes + + Represent the Discovery's PIC hardware + + Required properties: + - #interrupt-cells : <1> + - #address-cells : <0> + - compatible : "marvell,mv64360-pic" + - reg : Offset and length of the register set for this device + - interrupt-controller + + Example Discovery PIC node: + pic { + #interrupt-cells = <1>; + #address-cells = <0>; + compatible = "marvell,mv64360-pic"; + reg = <0x0 0x88>; + interrupt-controller; + }; + + + m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes + + Represent the Discovery's MPP hardware + + Required properties: + - compatible : "marvell,mv64360-mpp" + - reg : Offset and length of the register set for this device + + Example Discovery MPP node: + mpp@f000 { + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; + }; + + + n) Marvell Discovery GPP (General Purpose Pins) nodes + + Represent the Discovery's GPP hardware + + Required properties: + - compatible : "marvell,mv64360-gpp" + - reg : Offset and length of the register set for this device + + Example Discovery GPP node: + gpp@f000 { + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; + }; + + + o) Marvell Discovery PCI host bridge node + + Represents the Discovery's PCI host bridge device. The properties + for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE + 1275-1994. A typical value for the compatible property is + "marvell,mv64360-pci". + + Example Discovery PCI host bridge node + pci@80000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "marvell,mv64360-pci"; + reg = <0xcf8 0x8>; + ranges = <0x01000000 0x0 0x0 + 0x88000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 + 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0a */ + 0x5000 0 0 1 &PIC 80 + 0x5000 0 0 2 &PIC 81 + 0x5000 0 0 3 &PIC 91 + 0x5000 0 0 4 &PIC 93 + + /* IDSEL 0x0b */ + 0x5800 0 0 1 &PIC 91 + 0x5800 0 0 2 &PIC 93 + 0x5800 0 0 3 &PIC 80 + 0x5800 0 0 4 &PIC 81 + + /* IDSEL 0x0c */ + 0x6000 0 0 1 &PIC 91 + 0x6000 0 0 2 &PIC 93 + 0x6000 0 0 3 &PIC 80 + 0x6000 0 0 4 &PIC 81 + + /* IDSEL 0x0d */ + 0x6800 0 0 1 &PIC 93 + 0x6800 0 0 2 &PIC 80 + 0x6800 0 0 3 &PIC 81 + 0x6800 0 0 4 &PIC 91 + >; + }; + + + p) Marvell Discovery CPU Error nodes + + Represent the Discovery's CPU error handler device. + + Required properties: + - compatible : "marvell,mv64360-cpu-error" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery CPU Error node: + cpu-error@0070 { + compatible = "marvell,mv64360-cpu-error"; + reg = <0x70 0x10 0x128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; + }; + + + q) Marvell Discovery SRAM Controller nodes + + Represent the Discovery's SRAM controller device. + + Required properties: + - compatible : "marvell,mv64360-sram-ctrl" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery SRAM Controller node: + sram-ctrl@0380 { + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; + }; + + + r) Marvell Discovery PCI Error Handler nodes + + Represent the Discovery's PCI error handler device. + + Required properties: + - compatible : "marvell,mv64360-pci-error" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery PCI Error Handler node: + pci-error@1d40 { + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0xc28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; + }; + + + s) Marvell Discovery Memory Controller nodes + + Represent the Discovery's memory controller device. + + Required properties: + - compatible : "marvell,mv64360-mem-ctrl" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery Memory Controller node: + mem-ctrl@1400 { + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; + }; + + diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt new file mode 100644 index 00000000000..bb8c742eb8c --- /dev/null +++ b/Documentation/powerpc/dts-bindings/phy.txt @@ -0,0 +1,25 @@ +PHY nodes + +Required properties: + + - device_type : Should be "ethernet-phy" + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - reg : The ID number for the phy, usually a small integer + - linux,phandle : phandle for this node; likely referenced by an + ethernet controller node. + +Example: + +ethernet-phy@0 { + linux,phandle = <2452000> + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; +}; diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt new file mode 100644 index 00000000000..e782add2e45 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/spi-bus.txt @@ -0,0 +1,57 @@ +SPI (Serial Peripheral Interface) busses + +SPI busses can be described with a node for the SPI master device +and a set of child nodes for each SPI slave on the bus. For this +discussion, it is assumed that the system's SPI controller is in +SPI master mode. This binding does not describe SPI controllers +in slave mode. + +The SPI master node requires the following properties: +- #address-cells - number of cells required to define a chip select + address on the SPI bus. +- #size-cells - should be zero. +- compatible - name of SPI bus controller following generic names + recommended practice. +No other properties are required in the SPI bus node. It is assumed +that a driver for an SPI bus device will understand that it is an SPI bus. +However, the binding does not attempt to define the specific method for +assigning chip select numbers. Since SPI chip select configuration is +flexible and non-standardized, it is left out of this binding with the +assumption that board specific platform code will be used to manage +chip selects. Individual drivers can define additional properties to +support describing the chip select layout. + +SPI slave nodes must be children of the SPI master node and can +contain the following properties. +- reg - (required) chip select address of device. +- compatible - (required) name of SPI device following generic names + recommended practice +- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz +- spi-cpol - (optional) Empty property indicating device requires + inverse clock polarity (CPOL) mode +- spi-cpha - (optional) Empty property indicating device requires + shifted clock phase (CPHA) mode +- spi-cs-high - (optional) Empty property indicating device requires + chip select active high + +SPI example for an MPC5200 SPI bus: + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt new file mode 100644 index 00000000000..fa18612f757 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt @@ -0,0 +1,25 @@ +USB EHCI controllers + +Required properties: + - compatible : should be "usb-ehci". + - reg : should contain at least address and length of the standard EHCI + register set for the device. Optional platform-dependent registers + (debug-port or other) can be also specified here, but only after + definition of standard EHCI registers. + - interrupts : one EHCI interrupt should be described here. +If device registers are implemented in big endian mode, the device +node should have "big-endian-regs" property. +If controller implementation operates with big endian descriptors, +"big-endian-desc" property should be specified. +If both big endian registers and descriptors are used by the controller +implementation, "big-endian" property can be specified instead of having +both "big-endian-regs" and "big-endian-desc". + +Example (Sequoia 440EPx): + ehci@e0000300 { + compatible = "ibm,usb-ehci-440epx", "usb-ehci"; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + reg = <0 e0000300 90 0 e0000390 70>; + big-endian; + }; diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt new file mode 100644 index 00000000000..80339fe4300 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/xilinx.txt @@ -0,0 +1,295 @@ + d) Xilinx IP cores + + The Xilinx EDK toolchain ships with a set of IP cores (devices) for use + in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range + of standard device types (network, serial, etc.) and miscellaneous + devices (gpio, LCD, spi, etc). Also, since these devices are + implemented within the fpga fabric every instance of the device can be + synthesised with different options that change the behaviour. + + Each IP-core has a set of parameters which the FPGA designer can use to + control how the core is synthesized. Historically, the EDK tool would + extract the device parameters relevant to device drivers and copy them + into an 'xparameters.h' in the form of #define symbols. This tells the + device drivers how the IP cores are configured, but it requres the kernel + to be recompiled every time the FPGA bitstream is resynthesized. + + The new approach is to export the parameters into the device tree and + generate a new device tree each time the FPGA bitstream changes. The + parameters which used to be exported as #defines will now become + properties of the device node. In general, device nodes for IP-cores + will take the following form: + + (name): (generic-name)@(base-address) { + compatible = "xlnx,(ip-core-name)-(HW_VER)" + [, (list of compatible devices), ...]; + reg = <(baseaddr) (size)>; + interrupt-parent = <&interrupt-controller-phandle>; + interrupts = < ... >; + xlnx,(parameter1) = "(string-value)"; + xlnx,(parameter2) = <(int-value)>; + }; + + (generic-name): an open firmware-style name that describes the + generic class of device. Preferably, this is one word, such + as 'serial' or 'ethernet'. + (ip-core-name): the name of the ip block (given after the BEGIN + directive in system.mhs). Should be in lowercase + and all underscores '_' converted to dashes '-'. + (name): is derived from the "PARAMETER INSTANCE" value. + (parameter#): C_* parameters from system.mhs. The C_ prefix is + dropped from the parameter name, the name is converted + to lowercase and all underscore '_' characters are + converted to dashes '-'. + (baseaddr): the baseaddr parameter value (often named C_BASEADDR). + (HW_VER): from the HW_VER parameter. + (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). + + Typically, the compatible list will include the exact IP core version + followed by an older IP core version which implements the same + interface or any other device with the same interface. + + 'reg', 'interrupt-parent' and 'interrupts' are all optional properties. + + For example, the following block from system.mhs: + + BEGIN opb_uartlite + PARAMETER INSTANCE = opb_uartlite_0 + PARAMETER HW_VER = 1.00.b + PARAMETER C_BAUDRATE = 115200 + PARAMETER C_DATA_BITS = 8 + PARAMETER C_ODD_PARITY = 0 + PARAMETER C_USE_PARITY = 0 + PARAMETER C_CLK_FREQ = 50000000 + PARAMETER C_BASEADDR = 0xEC100000 + PARAMETER C_HIGHADDR = 0xEC10FFFF + BUS_INTERFACE SOPB = opb_7 + PORT OPB_Clk = CLK_50MHz + PORT Interrupt = opb_uartlite_0_Interrupt + PORT RX = opb_uartlite_0_RX + PORT TX = opb_uartlite_0_TX + PORT OPB_Rst = sys_bus_reset_0 + END + + becomes the following device tree node: + + opb_uartlite_0: serial@ec100000 { + device_type = "serial"; + compatible = "xlnx,opb-uartlite-1.00.b"; + reg = <ec100000 10000>; + interrupt-parent = <&opb_intc_0>; + interrupts = <1 0>; // got this from the opb_intc parameters + current-speed = <d#115200>; // standard serial device prop + clock-frequency = <d#50000000>; // standard serial device prop + xlnx,data-bits = <8>; + xlnx,odd-parity = <0>; + xlnx,use-parity = <0>; + }; + + Some IP cores actually implement 2 or more logical devices. In + this case, the device should still describe the whole IP core with + a single node and add a child node for each logical device. The + ranges property can be used to translate from parent IP-core to the + registers of each device. In addition, the parent node should be + compatible with the bus type 'xlnx,compound', and should contain + #address-cells and #size-cells, as with any other bus. (Note: this + makes the assumption that both logical devices have the same bus + binding. If this is not true, then separate nodes should be used + for each logical device). The 'cell-index' property can be used to + enumerate logical devices within an IP core. For example, the + following is the system.mhs entry for the dual ps2 controller found + on the ml403 reference design. + + BEGIN opb_ps2_dual_ref + PARAMETER INSTANCE = opb_ps2_dual_ref_0 + PARAMETER HW_VER = 1.00.a + PARAMETER C_BASEADDR = 0xA9000000 + PARAMETER C_HIGHADDR = 0xA9001FFF + BUS_INTERFACE SOPB = opb_v20_0 + PORT Sys_Intr1 = ps2_1_intr + PORT Sys_Intr2 = ps2_2_intr + PORT Clkin1 = ps2_clk_rx_1 + PORT Clkin2 = ps2_clk_rx_2 + PORT Clkpd1 = ps2_clk_tx_1 + PORT Clkpd2 = ps2_clk_tx_2 + PORT Rx1 = ps2_d_rx_1 + PORT Rx2 = ps2_d_rx_2 + PORT Txpd1 = ps2_d_tx_1 + PORT Txpd2 = ps2_d_tx_2 + END + + It would result in the following device tree nodes: + + opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ranges = <0 a9000000 2000>; + // If this device had extra parameters, then they would + // go here. + ps2@0 { + compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; + reg = <0 40>; + interrupt-parent = <&opb_intc_0>; + interrupts = <3 0>; + cell-index = <0>; + }; + ps2@1000 { + compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; + reg = <1000 40>; + interrupt-parent = <&opb_intc_0>; + interrupts = <3 0>; + cell-index = <0>; + }; + }; + + Also, the system.mhs file defines bus attachments from the processor + to the devices. The device tree structure should reflect the bus + attachments. Again an example; this system.mhs fragment: + + BEGIN ppc405_virtex4 + PARAMETER INSTANCE = ppc405_0 + PARAMETER HW_VER = 1.01.a + BUS_INTERFACE DPLB = plb_v34_0 + BUS_INTERFACE IPLB = plb_v34_0 + END + + BEGIN opb_intc + PARAMETER INSTANCE = opb_intc_0 + PARAMETER HW_VER = 1.00.c + PARAMETER C_BASEADDR = 0xD1000FC0 + PARAMETER C_HIGHADDR = 0xD1000FDF + BUS_INTERFACE SOPB = opb_v20_0 + END + + BEGIN opb_uart16550 + PARAMETER INSTANCE = opb_uart16550_0 + PARAMETER HW_VER = 1.00.d + PARAMETER C_BASEADDR = 0xa0000000 + PARAMETER C_HIGHADDR = 0xa0001FFF + BUS_INTERFACE SOPB = opb_v20_0 + END + + BEGIN plb_v34 + PARAMETER INSTANCE = plb_v34_0 + PARAMETER HW_VER = 1.02.a + END + + BEGIN plb_bram_if_cntlr + PARAMETER INSTANCE = plb_bram_if_cntlr_0 + PARAMETER HW_VER = 1.00.b + PARAMETER C_BASEADDR = 0xFFFF0000 + PARAMETER C_HIGHADDR = 0xFFFFFFFF + BUS_INTERFACE SPLB = plb_v34_0 + END + + BEGIN plb2opb_bridge + PARAMETER INSTANCE = plb2opb_bridge_0 + PARAMETER HW_VER = 1.01.a + PARAMETER C_RNG0_BASEADDR = 0x20000000 + PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF + PARAMETER C_RNG1_BASEADDR = 0x60000000 + PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF + PARAMETER C_RNG2_BASEADDR = 0x80000000 + PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF + PARAMETER C_RNG3_BASEADDR = 0xC0000000 + PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF + BUS_INTERFACE SPLB = plb_v34_0 + BUS_INTERFACE MOPB = opb_v20_0 + END + + Gives this device tree (some properties removed for clarity): + + plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v34-1.02.a"; + device_type = "ibm,plb"; + ranges; // 1:1 translation + + plb_bram_if_cntrl_0: bram@ffff0000 { + reg = <ffff0000 10000>; + } + + opb@20000000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <20000000 20000000 20000000 + 60000000 60000000 20000000 + 80000000 80000000 40000000 + c0000000 c0000000 20000000>; + + opb_uart16550_0: serial@a0000000 { + reg = <a00000000 2000>; + }; + + opb_intc_0: interrupt-controller@d1000fc0 { + reg = <d1000fc0 20>; + }; + }; + }; + + That covers the general approach to binding xilinx IP cores into the + device tree. The following are bindings for specific devices: + + i) Xilinx ML300 Framebuffer + + Simple framebuffer device from the ML300 reference design (also on the + ML403 reference design as well as others). + + Optional properties: + - resolution = <xres yres> : pixel resolution of framebuffer. Some + implementations use a different resolution. + Default is <d#640 d#480> + - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory. + Default is <d#1024 d#480>. + - rotate-display (empty) : rotate display 180 degrees. + + ii) Xilinx SystemACE + + The Xilinx SystemACE device is used to program FPGAs from an FPGA + bitstream stored on a CF card. It can also be used as a generic CF + interface device. + + Optional properties: + - 8-bit (empty) : Set this property for SystemACE in 8 bit mode + + iii) Xilinx EMAC and Xilinx TEMAC + + Xilinx Ethernet devices. In addition to general xilinx properties + listed above, nodes for these devices should include a phy-handle + property, and may include other common network device properties + like local-mac-address. + + iv) Xilinx Uartlite + + Xilinx uartlite devices are simple fixed speed serial ports. + + Required properties: + - current-speed : Baud rate of uartlite + + v) Xilinx hwicap + + Xilinx hwicap devices provide access to the configuration logic + of the FPGA through the Internal Configuration Access Port + (ICAP). The ICAP enables partial reconfiguration of the FPGA, + readback of the configuration information, and some control over + 'warm boots' of the FPGA fabric. + + Required properties: + - xlnx,family : The family of the FPGA, necessary since the + capabilities of the underlying ICAP hardware + differ between different families. May be + 'virtex2p', 'virtex4', or 'virtex5'. + + vi) Xilinx Uart 16550 + + Xilinx UART 16550 devices are very similar to the NS16550 but with + different register spacing and an offset from the base address. + + Required properties: + - clock-frequency : Frequency of the clock input + - reg-offset : A value of 3 is required + - reg-shift : A value of 2 is required + + diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 0d8d23581c4..939a3dd5814 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -240,6 +240,7 @@ AD1986A laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) ultra 2-channel with EAPD (Samsung Ultra tablet PC) samsung 2-channel with EAPD (Samsung R65) + samsung-p50 2-channel with HP-automute (Samsung P50) AD1988/AD1988B/AD1989A/AD1989B ============================== diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index cf0e3ce0d52..c1a5aad3c75 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[]) { "lsb", 0, 0, 'L' }, { "cs-high", 0, 0, 'C' }, { "3wire", 0, 0, '3' }, + { "no-cs", 0, 0, 'N' }, + { "ready", 0, 0, 'R' }, { NULL, 0, 0, 0 }, }; int c; - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL); + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL); if (c == -1) break; @@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[]) case '3': mode |= SPI_3WIRE; break; + case 'N': + mode |= SPI_NO_CS; + break; + case 'R': + mode |= SPI_READY; + break; default: print_usage(argv[0]); break; diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 873630e7e53..014d255231f 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -66,3 +66,4 @@ 68 -> Terratec AV350 (em2860) [0ccd:0084] 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] 70 -> Evga inDtube (em2882) + 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) diff --git a/MAINTAINERS b/MAINTAINERS index 28c150e916a..e4b1a3d596c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -867,12 +867,22 @@ M: alex@shark-linux.de W: http://www.shark-linux.de/shark.html S: Maintained +ARM/SAMSUNG ARM ARCHITECTURES +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/plat-s3c/ +F: arch/arm/plat-s3c24xx/ + ARM/S3C2410 ARM ARCHITECTURE P: Ben Dooks M: ben-linux@fluff.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained +F: arch/arm/mach-s3c2410/ ARM/S3C2440 ARM ARCHITECTURE P: Ben Dooks @@ -880,6 +890,39 @@ M: ben-linux@fluff.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.fluff.org/ben/linux/ S: Maintained +F: arch/arm/mach-s3c2440/ + +ARM/S3C2442 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c2442/ + +ARM/S3C2443 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c2443/ + +ARM/S3C6400 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c6400/ + +ARM/S3C6410 ARM ARCHITECTURE +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.fluff.org/ben/linux/ +S: Maintained +F: arch/arm/mach-s3c6410/ ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT P: Lennert Buytenhek @@ -2087,9 +2130,9 @@ F: drivers/edac/i5400_edac.c EDAC-I82975X P: Ranganathan Desikan -M: rdesikan@jetzbroadband.com +M: ravi@jetztechnologies.com P: Arvind R. -M: arvind@acarlab.com +M: arvind@jetztechnologies.com L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net S: Maintained @@ -2808,7 +2851,9 @@ S: Maintained IA64 (Itanium) PLATFORM P: Tony Luck +P: Fenghua Yu M: tony.luck@intel.com +M: fenghua.yu@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git @@ -5533,8 +5578,8 @@ F: drivers/staging/ STARFIRE/DURALAN NETWORK DRIVER P: Ion Badulescu -M: ionut@cs.columbia.edu -S: Maintained +M: ionut@badula.org +S: Odd Fixes F: drivers/net/starfire* STARMODE RADIO IP (STRIP) PROTOCOL DRIVER @@ -5668,6 +5713,13 @@ F: drivers/misc/tifm* F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h +TI TWL4030 SERIES SOC CODEC DRIVER +P: Peter Ujfalusi +M: peter.ujfalusi@nokia.com +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: sound/soc/codecs/twl4030* + TIPC NETWORK LAYER P: Per Liden M: per.liden@ericsson.com @@ -5751,17 +5803,17 @@ P: Jiri Kosina M: trivial@kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git S: Maintained -F: drivers/char/tty_* -F: drivers/serial/serial_core.c -F: include/linux/serial_core.h -F: include/linux/serial.h -F: include/linux/tty.h TTY LAYER P: Alan Cox M: alan@lxorguk.ukuu.org.uk S: Maintained T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ +F: drivers/char/tty_* +F: drivers/serial/serial_core.c +F: include/linux/serial_core.h +F: include/linux/serial.h +F: include/linux/tty.h TULIP NETWORK DRIVERS P: Grant Grundler @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* @@ -140,15 +140,13 @@ _all: modules endif srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -TOPDIR := $(srctree) -# FIXME - TOPDIR is obsolete, use srctree/objtree objtree := $(CURDIR) src := $(srctree) obj := $(objtree) VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) -export srctree objtree VPATH TOPDIR +export srctree objtree VPATH # SUBARCH tells the usermode build what the underlying arch is. That is set @@ -344,7 +342,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common \ - -Werror-implicit-function-declaration + -Werror-implicit-function-declaration \ + -Wno-format-security KBUILD_AFLAGS := -D__ASSEMBLY__ # Read KERNELRELEASE from include/config/kernel.release (if it exists) diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 06c5c7a4afd..b663f1f10b6 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #ifndef MODULE #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) -#define PER_CPU_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES #else /* * To calculate addresses of locally defined variables, GCC uses 32-bit @@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; : "=&r"(__ptr), "=&r"(tmp_gp)); \ (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) -#define PER_CPU_ATTRIBUTES __used +#define PER_CPU_DEF_ATTRIBUTES __used #endif /* MODULE */ @@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #define __get_cpu_var(var) per_cpu_var(var) #define __raw_get_cpu_var(var) per_cpu_var(var) -#define PER_CPU_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES #endif /* SMP */ diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a71fd941ade..a89e4734b8f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2 output to the second serial port on these devices. Saying N will cause the debug messages to appear on the first serial port. -config DEBUG_S3C_PORT - depends on DEBUG_LL && PLAT_S3C - bool "Kernel low-level debugging messages via S3C UART" - help - Say Y here if you want debug print routines to go to one of the - S3C internal UARTs. The chosen UART must have been configured - before it is used. - config DEBUG_S3C_UART depends on PLAT_S3C int "S3C UART to use for low-level debug" diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 8e74c66f239..605a8462f17 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -1,109 +1,246 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Sun Aug 14 19:26:59 2005 +# Linux kernel version: 2.6.30-rc8 +# Wed Jun 3 13:52:33 2009 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # -# Loadable module support +# IO Schedulers # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # System Type # -# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Atmel AT91 System-on-Chip +# CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y # -# AT91RM9200 Implementations +# AT91RM9200 Board Type # +# CONFIG_MACH_ONEARM is not set # CONFIG_ARCH_AT91RM9200DK is not set # CONFIG_MACH_AT91RM9200EK is not set # CONFIG_MACH_CSB337 is not set # CONFIG_MACH_CSB637 is not set # CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_ATEB9200 is not set CONFIG_MACH_KB9200=y +# CONFIG_MACH_PICOTUX2XX is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_ECBAT91 is not set +# CONFIG_MACH_YL9200 is not set + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y +CONFIG_CPU_32v4T=y CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y -# CONFIG_ARTHUR is not set # # Power management options # # CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y # -# Device Drivers +# Networking options # +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # -# Generic Driver Options +# Network testing # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -CONFIG_DEBUG_DRIVER=y +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # -# Memory Technology Devices (MTD) +# Device Drivers # -# CONFIG_MTD is not set # -# Parallel port support +# Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set # -# IO Schedulers +# EEPROM support # -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set - -# -# ISDN subsystem -# +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# IPMI +# Memory mapped GPIO expanders: # -# CONFIG_IPMI_HANDLER is not set # -# Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_AT91RM9200_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver +# PCI GPIO expanders: # -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# SPI GPIO expanders: # -# CONFIG_AT91_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# I2C support +# Watchdog Device Drivers # -# CONFIG_I2C is not set +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91RM9200_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Misc devices +# Sonics Silicon Backplane # +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set # -# USB HID Boot Protocol drivers +# also be needed; see USB_STORAGE Help for more info # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices +# USB port drivers # -# CONFIG_USB_DABUSB is not set +# CONFIG_USB_SERIAL is not set # -# Video4Linux support is needed for USB Multimedia device support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB Network Adapters +# OTG and related infrastructure # -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# USB port drivers +# MMC/SD/SDIO Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Serial Converter support +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_SERIAL is not set +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# USB Miscellaneous drivers +# RTC interfaces # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# USB DSL modem support +# SPI RTC drivers # # -# USB Gadget Support +# Platform RTC drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# MMC/SD Card support +# on-CPU RTC drivers # -# CONFIG_MMC is not set +CONFIG_RTC_DRV_AT91RM9200=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # -# XFS support +# Caches # -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# +# CONFIG_BINARY_PRINTF is not set # # Library routines # +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2d58b8fe59b..b49810461e4 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y +CONFIG_MACH_MINI2440=y # # S3C2442 Machines @@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 2e8fa50e9a0..32860609e05 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 07dfb98df4f..9d32faef05f 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_S3C_PORT is not set CONFIG_DEBUG_S3C_UART=0 # diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 2d827e12114..4762d900129 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Mon Jun 1 09:18:22 2009 +# Linux kernel version: 2.6.31-rc1 +# Thu Jul 2 00:16:59 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -81,8 +79,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_AIO is not set + +# +# Performance Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y # @@ -243,7 +250,6 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072" +CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_STU300=y # # External I2C/SMBus adapter drivers @@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y # # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +CONFIG_SPI_PL022=y # # SPI Protocol Masters @@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_COH901327_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +CONFIG_AB3100_CORE=y +# CONFIG_EZX_PCAP is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -760,6 +761,11 @@ CONFIG_SND_JACK=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_DEBUG=y # CONFIG_MMC_UNSAFE_RESUME is not set # @@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -887,7 +894,10 @@ CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -900,16 +910,20 @@ CONFIG_REGULATOR=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set # # Caches @@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index be962c1349c..9c746af1bf6 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -12,7 +12,7 @@ /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1cd2d6416bd..c433c6c7311 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -285,15 +285,6 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) #define pte_special(pte) (0) -/* - * The following only works if pte_present() is not true. - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 2) -#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 30 - #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* Encode and decode a swap entry. +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: * - * We support up to 32GB of swap on 4k machines + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------------> <--- type --> 0 0 + * + * This gives us up to 127 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. */ -#define __swp_type(x) (((x).val >> 2) & 0x7f) -#define __swp_offset(x) ((x).val >> 9) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __SWP_TYPE_SHIFT 2 +#define __SWP_TYPE_BITS 7 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <------------------------ offset -------------------------> 1 0 + */ +#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE) + +#define PTE_FILE_MAX_BITS 30 + /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 096f600dc8d..b7c3490eaa2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -98,17 +98,6 @@ unlock: return 0; } -/* Handle bad interrupts */ -static struct irq_desc bad_irq_desc = { - .handle_irq = handle_bad_irq, - .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), -}; - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* We are not allocating bad_irq_desc.affinity or .pending_mask */ -#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." -#endif - /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (irq >= NR_IRQS) - handle_bad_irq(irq, &bad_irq_desc); - else + if (unlikely(irq >= NR_IRQS)) { + if (printk_ratelimit()) + printk(KERN_WARNING "Bad IRQ%u\n", irq); + ack_bad_irq(irq); + } else { generic_handle_irq(irq); + } /* AT91 specific workaround */ irq_finish(irq); @@ -165,10 +157,6 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; -#ifdef CONFIG_SMP - cpumask_setall(bad_irq_desc.affinity); - bad_irq_desc.node = smp_processor_id(); -#endif init_arch_irq(); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 4340bf3d2c8..69371028a20 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/page.h> OUTPUT_ARCH(arm) ENTRY(stext) @@ -63,7 +64,7 @@ SECTIONS usr/built-in.o(.init.ramfs) __initramfs_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __per_cpu_load = .; __per_cpu_start = .; *(.data.percpu.page_aligned) @@ -73,7 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif } @@ -118,7 +119,7 @@ SECTIONS *(.got) /* Global offset table */ } - RODATA + RO_DATA(PAGE_SIZE) _etext = .; /* End of text and rodata section */ @@ -158,17 +159,17 @@ SECTIONS *(.data.init_task) #ifdef CONFIG_XIP_KERNEL - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __init_end = .; #endif - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_begin = .; *(.data.nosave) - . = ALIGN(4096); + . = ALIGN(PAGE_SIZE); __nosave_end = .; /* diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index cc270beadd5..a55398ed121 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -24,6 +24,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/clk.h> #include <mach/hardware.h> @@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = { } }; + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { + .gpio = AT91_PIN_PA30, + .code = BTN_3, + .desc = "Button 3", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA31, + .code = BTN_4, + .desc = "Button 4", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ + at91_set_deglitch(AT91_PIN_PA30, 1); + at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ + at91_set_deglitch(AT91_PIN_PA31, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -245,6 +297,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); + /* Push Buttons */ + ek_add_device_buttons(); /* PCK0 provides MCLK to the WM8731 */ at91_set_B_periph(AT91_PIN_PC1, 0); /* SSC (for WM8731) */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 35e12a49d1a..f6b5672cabd 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { if (on) - at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ + at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */ else - at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */ } /* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .lcdcon_is_backlight = true, .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2, .default_monspecs = &at91fb_default_monspecs, .atmel_lcdfb_power_control = at91_lcdc_power_control, .guard_time = 1, + .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, }; #else diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e70fc7c66bb..ed2a48a9ce7 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -36,7 +36,6 @@ #include <mach/hwa742.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> -#include <mach/usb.h> #include <mach/clock.h> #define ADS7846_PENDOWN_GPIO 15 @@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot) static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .dma_mask = 0xffffffff, + .max_freq = 12000000, .slots[0] = { .set_power = nokia770_mmc_set_power, .get_cover_state = nokia770_mmc_get_cover_state, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 0af4d6c85b4..6810b4aeb02 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index da93b86234e..9a0bf6744a0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .gpio_irq = 65, .parts = onenand_partitions, .nr_parts = ARRAY_SIZE(onenand_partitions), + .flags = ONENAND_SYNC_READWRITE, }; static void __init board_onenand_init(void) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 2fd22f9c5f0..54fec53a48e 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = { static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) { struct gpmc_timings t; + u32 reg; + int err; const int t_cer = 15; const int t_avdp = 12; @@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - return gpmc_cs_set_timings(cs, &t); + err = gpmc_cs_set_timings(cs, &t); + if (err) + return err; + + /* Ensure sync read and sync write are disabled */ + reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); + + return 0; } static void set_onenand_cfg(void __iomem *onenand_base, int latency, @@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } else if (cfg->flags & ONENAND_SYNC_READWRITE) { sync_read = 1; sync_write = 1; - } + } else + return omap2_onenand_set_async_mode(cs, onenand_base); if (!freq) { /* Very first call freq is not known */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 458990e20c6..a98201cc265 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci) } EXPORT_SYMBOL(omap_chip_is); +int omap_type(void) +{ + u32 val = 0; + + if (cpu_is_omap24xx()) + val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + else if (cpu_is_omap34xx()) + val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); + else { + pr_err("Cannot detect omap type!\n"); + goto out; + } + + val &= OMAP2_DEVICETYPE_MASK; + val >>= 8; + +out: + return val; +} +EXPORT_SYMBOL(omap_type); + + /*----------------------------------------------------------------------------*/ #define OMAP_TAP_IDCODE 0x0204 diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index fd5b8a5925c..6f71f3730c9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) return -ENOMEM; /* DSP or IVA2 IRQ */ - mbox_dsp_info.irq = platform_get_irq(pdev, 0); - if (mbox_dsp_info.irq < 0) { + ret = platform_get_irq(pdev, 0); + if (ret < 0) { dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; goto err_dsp; } + mbox_dsp_info.irq = ret; ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); if (ret) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 9756a878fd9..1541fd4c8d0 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on, static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd) { int ret = 0; - struct twl_mmc_controller *c = &hsmmc[1]; + struct twl_mmc_controller *c = NULL; struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; + + for (i = 1; i < ARRAY_SIZE(hsmmc); i++) { + if (mmc == hsmmc[i].mmc) { + c = &hsmmc[i]; + break; + } + } + + if (c == NULL) + return -ENODEV; /* If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 6a5bc3021bd..ec71a696578 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -48,8 +48,6 @@ #include <plat/mci.h> #include <plat/udc.h> -#include <plat/regs-serial.h> - #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> @@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = { .nr_chips = 1, .nr_partitions = ARRAY_SIZE(mini2440_default_nand_part), .partitions = mini2440_default_nand_part, + .flash_bbt = 1, /* we use u-boot to create a BBT */ }, }; diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c index e23b581aa0e..0fb385bd9cd 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2442/mach-gta02.c @@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = { */ .name = "neo1973-nand", .nr_chips = 1, - .use_bbt = 1, - .force_soft_ecc = 1, + .flash_bbt = 1, }, }; diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5cd04d6751b..111f7ea32b3 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/timer.h> #include <linux/io.h> +#include <linux/seq_file.h> #include <asm/clkdev.h> #include <mach/hardware.h> @@ -702,6 +703,7 @@ static struct clk amba_clk = { .rate = 52000000, /* this varies! */ .hw_ctrld = true, .reset = false, + .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), }; /* @@ -720,6 +722,7 @@ static struct clk cpu_clk = { .set_rate = clk_set_rate_cpuclk, .get_rate = clk_get_rate_cpuclk, .round_rate = clk_round_rate_cpuclk, + .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), }; static struct clk nandif_clk = { @@ -732,6 +735,7 @@ static struct clk nandif_clk = { .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), }; static struct clk semi_clk = { @@ -744,6 +748,7 @@ static struct clk semi_clk = { .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -758,6 +763,7 @@ static struct clk isp_clk = { .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), }; static struct clk cds_clk = { @@ -771,6 +777,7 @@ static struct clk cds_clk = { .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), }; #endif @@ -785,6 +792,7 @@ static struct clk dma_clk = { .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), }; static struct clk aaif_clk = { @@ -798,6 +806,7 @@ static struct clk aaif_clk = { .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), }; static struct clk apex_clk = { @@ -811,6 +820,7 @@ static struct clk apex_clk = { .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), }; static struct clk video_enc_clk = { @@ -825,6 +835,7 @@ static struct clk video_enc_clk = { .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), }; static struct clk xgam_clk = { @@ -839,6 +850,7 @@ static struct clk xgam_clk = { .get_rate = clk_get_rate_xgamclk, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), }; /* This clock is used to activate the video encoder */ @@ -854,6 +866,7 @@ static struct clk ahb_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), }; @@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_ahb_clk, + .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), }; static struct clk intcon_clk = { @@ -882,6 +896,8 @@ static struct clk intcon_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, /* INTCON can be reset but not clock-gated */ + .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), + }; static struct clk mspro_clk = { @@ -895,6 +911,7 @@ static struct clk mspro_clk = { .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), }; static struct clk emif_clk = { @@ -909,6 +926,7 @@ static struct clk emif_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_emif_clk, + .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), }; @@ -926,6 +944,7 @@ static struct clk fast_clk = { .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), }; static struct clk mmcsd_clk = { @@ -942,6 +961,7 @@ static struct clk mmcsd_clk = { .round_rate = clk_round_rate_mclk, .disable = syscon_clk_disable, .enable = syscon_clk_enable, + .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), }; static struct clk i2s0_clk = { @@ -956,6 +976,7 @@ static struct clk i2s0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), }; static struct clk i2s1_clk = { @@ -970,6 +991,7 @@ static struct clk i2s1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), }; static struct clk i2c0_clk = { @@ -984,6 +1006,7 @@ static struct clk i2c0_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), }; static struct clk i2c1_clk = { @@ -998,6 +1021,7 @@ static struct clk i2c1_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), }; static struct clk spi_clk = { @@ -1012,6 +1036,7 @@ static struct clk spi_clk = { .enable = syscon_clk_enable, .disable = syscon_clk_disable, .get_rate = clk_get_rate_i2s_i2c_spi, + .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1026,6 +1051,7 @@ static struct clk uart1_clk = { .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), }; #endif @@ -1044,6 +1070,7 @@ static struct clk slow_clk = { .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), }; /* TODO: implement SYSCON clock? */ @@ -1055,6 +1082,7 @@ static struct clk wdog_clk = { .rate = 32768, .reset = false, /* This is always on, cannot be enabled/disabled or reset */ + .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), }; /* This one is hardwired to PLL13 */ @@ -1069,6 +1097,7 @@ static struct clk uart_clk = { .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock), }; static struct clk keypad_clk = { @@ -1082,6 +1111,7 @@ static struct clk keypad_clk = { .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), }; static struct clk gpio_clk = { @@ -1095,6 +1125,7 @@ static struct clk gpio_clk = { .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), }; static struct clk rtc_clk = { @@ -1106,6 +1137,7 @@ static struct clk rtc_clk = { .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, /* This clock is always on, cannot be enabled/disabled */ + .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), }; static struct clk bustr_clk = { @@ -1119,6 +1151,7 @@ static struct clk bustr_clk = { .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), }; static struct clk evhist_clk = { @@ -1132,6 +1165,7 @@ static struct clk evhist_clk = { .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), }; static struct clk timer_clk = { @@ -1145,6 +1179,7 @@ static struct clk timer_clk = { .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), }; static struct clk app_timer_clk = { @@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = { .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), }; #ifdef CONFIG_MACH_U300_BS335 @@ -1172,6 +1208,7 @@ static struct clk ppm_clk = { .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, .enable = syscon_clk_enable, .disable = syscon_clk_disable, + .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), }; #endif @@ -1187,53 +1224,53 @@ static struct clk ppm_clk = { */ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("nandif", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), + DEF_LOOKUP("amba", &amba_clk), + DEF_LOOKUP("cpu", &cpu_clk), + DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), + DEF_LOOKUP("isp", &isp_clk), + DEF_LOOKUP("cds", &cds_clk), #endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("aaif", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), + DEF_LOOKUP("dma", &dma_clk), + DEF_LOOKUP("msl", &aaif_clk), + DEF_LOOKUP("apex", &apex_clk), DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), + DEF_LOOKUP("xgam", &xgam_clk), + DEF_LOOKUP("ahb", &ahb_clk), /* AHB bridge clocks */ - DEF_LOOKUP("ahb", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), + DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), + DEF_LOOKUP("intcon", &intcon_clk), + DEF_LOOKUP("mspro", &mspro_clk), + DEF_LOOKUP("pl172", &emif_clk), /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), + DEF_LOOKUP("fast", &fast_clk), + DEF_LOOKUP("mmci", &mmcsd_clk), /* * The .0 and .1 identifiers on these comes from the platform device * .id field and are assigned when the platform devices are registered. */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stddci2c.0", &i2c0_clk), - DEF_LOOKUP("stddci2c.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), + DEF_LOOKUP("i2s.0", &i2s0_clk), + DEF_LOOKUP("i2s.1", &i2s1_clk), + DEF_LOOKUP("stu300.0", &i2c0_clk), + DEF_LOOKUP("stu300.1", &i2c1_clk), + DEF_LOOKUP("pl022", &spi_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), + DEF_LOOKUP("uart1", &uart1_clk), #endif /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart_clk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("keypad", &keypad_clk), + DEF_LOOKUP("slow", &slow_clk), + DEF_LOOKUP("coh901327_wdog", &wdog_clk), + DEF_LOOKUP("uart0", &uart_clk), + DEF_LOOKUP("apptimer", &app_timer_clk), + DEF_LOOKUP("coh901461-keypad", &keypad_clk), DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc0", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), + DEF_LOOKUP("rtc-coh901331", &rtc_clk), + DEF_LOOKUP("bustr", &bustr_clk), + DEF_LOOKUP("evhist", &evhist_clk), + DEF_LOOKUP("timer", &timer_clk), #ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), + DEF_LOOKUP("ppm", &ppm_clk), #endif }; @@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = { .release = single_release, }; -static void init_clk_read_procfs(void) +static int __init init_clk_read_debugfs(void) { /* Expose a simple debugfs interface to view all clocks */ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, &u300_clocks_operations); -} -#else -static inline void init_clk_read_procfs(void) -{ + NULL, NULL, + &u300_clocks_operations); + return 0; } +/* + * This needs to come in after the core_initcall() for the + * overall clocks, because debugfs is not available until + * the subsystems come up. + */ +module_init(init_clk_read_debugfs); #endif static int __init u300_clock_init(void) @@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void) clk_register(); - init_clk_read_procfs(); - /* * Some of these may be on when we boot the system so make sure they * are turned OFF. diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 195e48edd8c..ac5c80062b7 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all); EXPORT_SYMBOL(__cpuc_flush_user_all); EXPORT_SYMBOL(__cpuc_flush_user_range); EXPORT_SYMBOL(__cpuc_coherent_kern_range); +EXPORT_SYMBOL(__cpuc_flush_dcache_page); EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */ #else EXPORT_SYMBOL(cpu_cache); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index def14ec265b..7677a4a1cef 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } + /* Enable smartidle idlemodes and autoidle */ + if (cpu_is_omap34xx()) { + u32 v = dma_read(OCP_SYSCONFIG); + v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | + DMA_SYSCONFIG_SIDLEMODE_MASK | + DMA_SYSCONFIG_AUTOIDLE); + v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | + DMA_SYSCONFIG_AUTOIDLE); + dma_write(v , OCP_SYSCONFIG); + } + + /* FIXME: Update LCD DMA to work on 24xx */ if (cpu_class_is_omap1()) { r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7fd89ba8d3b..26b387c1242 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void) __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN); /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index fc60c4ebcc2..285eaa3a827 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -30,6 +30,17 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + struct omap_chip_id { u8 oc; u8 type; @@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); -int omap_type(void); - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - void omap2_check_revision(void); #endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h index 8c1eae88737..7b939cc0196 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -389,6 +389,21 @@ #define DMA_THREAD_FIFO_25 (0x02 << 14) #define DMA_THREAD_FIFO_50 (0x03 << 14) +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + /* Chaining modes*/ #ifndef CONFIG_ARCH_OMAP1 #define OMAP_DMA_STATIC_CHAIN 0x1 diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 3b281472056..73f483d56ca 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -201,7 +201,7 @@ #define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) #ifdef __ASSEMBLER__ -#define IOMEM(x) x +#define IOMEM(x) (x) #else #define IOMEM(x) ((void __force __iomem *)(x)) diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4cf449fa2cb..4a030139901 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); - + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 65006df3f1b..4ea73804d21 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -133,7 +133,12 @@ void __init omap_detect_sram(void) if (cpu_is_omap34xx()) { omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; - omap_sram_size = 0x8000; /* 32K */ + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + } else { + omap_sram_size = 0x8000; /* 32K */ + } } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 74bb7cb5da4..0761766b183 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index b5b9c4d46e9..2e170827e0b 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 636cb12711d..579a165c282 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_S3C24XX_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C24XX_ADC) += adc.o diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9edf7894eed..da7a61728c1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index f34d0fc69ad..86b9edc6741 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -12,8 +12,7 @@ */ #include <linux/kernel.h> - -#include <mach/hardware.h> +#include <linux/gpio.h> #include <mach/spi.h> #include <mach/regs-gpio.h> diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index 6e3d491184e..b91b2044af9 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err) spin_lock_irq(&die_lock); bust_spinlocks(1); - printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG, + printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); + + printk(KERN_EMERG); + #ifdef CONFIG_PREEMPT - printk("PREEMPT "); + printk(KERN_CONT "PREEMPT "); #endif #ifdef CONFIG_FRAME_POINTER - printk("FRAME_POINTER "); + printk(KERN_CONT "FRAME_POINTER "); #endif if (current_cpu_data.features & AVR32_FEATURE_OCD) { unsigned long did = ocd_read(DID); - printk("chip: 0x%03lx:0x%04lx rev %lu\n", + printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n", (did >> 1) & 0x7ff, (did >> 12) & 0x7fff, (did >> 28) & 0xf); } else { - printk("cpu: arch %u r%u / core %u r%u\n", + printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n", current_cpu_data.arch_type, current_cpu_data.arch_revision, current_cpu_data.cpu_type, diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 298f023bcc0..6136c33e919 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -408,13 +408,14 @@ static void __init print_memory_map(char *who) bfin_memmap.map[i].addr + bfin_memmap.map[i].size); switch (bfin_memmap.map[i].type) { case BFIN_MEMMAP_RAM: - printk("(usable)\n"); - break; + printk(KERN_CONT "(usable)\n"); + break; case BFIN_MEMMAP_RESERVED: - printk("(reserved)\n"); - break; - default: printk("type %lu\n", bfin_memmap.map[i].type); - break; + printk(KERN_CONT "(reserved)\n"); + break; + default: + printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type); + break; } } } @@ -614,19 +615,19 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" - KERN_INFO " fixedcode = 0x%p-0x%p\n" - KERN_INFO " text = 0x%p-0x%p\n" - KERN_INFO " rodata = 0x%p-0x%p\n" - KERN_INFO " bss = 0x%p-0x%p\n" - KERN_INFO " data = 0x%p-0x%p\n" - KERN_INFO " stack = 0x%p-0x%p\n" - KERN_INFO " init = 0x%p-0x%p\n" - KERN_INFO " available = 0x%p-0x%p\n" + " fixedcode = 0x%p-0x%p\n" + " text = 0x%p-0x%p\n" + " rodata = 0x%p-0x%p\n" + " bss = 0x%p-0x%p\n" + " data = 0x%p-0x%p\n" + " stack = 0x%p-0x%p\n" + " init = 0x%p-0x%p\n" + " available = 0x%p-0x%p\n" #ifdef CONFIG_MTD_UCLINUX - KERN_INFO " rootfs = 0x%p-0x%p\n" + " rootfs = 0x%p-0x%p\n" #endif #if DMA_UNCACHED_REGION > 0 - KERN_INFO " DMA Zone = 0x%p-0x%p\n" + " DMA Zone = 0x%p-0x%p\n" #endif , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, _stext, _etext, @@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p) #endif printk(KERN_INFO "Hardware Trace "); if (bfin_read_TBUFCTL() & 0x1) - printk("Active "); + printk(KERN_CONT "Active "); else - printk("Off "); + printk(KERN_CONT "Off "); if (bfin_read_TBUFCTL() & 0x2) - printk("and Enabled\n"); + printk(KERN_CONT "and Enabled\n"); else - printk("and Disabled\n"); + printk(KERN_CONT "and Disabled\n"); #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) /* we need to initialize the Flashrom device here since we might diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 8eeb457ce5d..8a1caf2bb5b 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) console_verbose(); oops_in_progress = 1; #ifdef CONFIG_DEBUG_VERBOSE - printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); + printk(KERN_EMERG "Double Fault\n"); #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { unsigned int cpu = smp_processor_id(); @@ -583,15 +583,14 @@ asmlinkage void trap_c(struct pt_regs *fp) #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M) verbose_printk(KERN_NOTICE "No trace since you do not have " - "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n" - KERN_NOTICE "\n"); + "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n"); else #endif dump_bfin_trace_buffer(); if (oops_in_progress) { /* Dump the current kernel stack */ - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n"); + verbose_printk(KERN_NOTICE "Kernel Stack\n"); show_stack(current, NULL); print_modules(); #ifndef CONFIG_ACCESS_CHECK @@ -906,7 +905,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) ret_addr = 0; if (!j && i % 8 == 0) - printk("\n" KERN_NOTICE "%p:",addr); + printk(KERN_NOTICE "%p:",addr); /* if it is an odd address, or zero, just skip it */ if (*addr & 0x1 || !*addr) @@ -996,9 +995,9 @@ void dump_bfin_process(struct pt_regs *fp) printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) - verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", + verbose_printk(KERN_NOTICE + "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", (void *)current->mm->start_code, (void *)current->mm->end_code, (void *)current->mm->start_data, @@ -1009,8 +1008,8 @@ void dump_bfin_process(struct pt_regs *fp) else verbose_printk(KERN_NOTICE "invalid mm\n"); } else - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE - "No Valid process in current context\n"); + verbose_printk(KERN_NOTICE + "No Valid process in current context\n"); #endif } @@ -1028,7 +1027,7 @@ void dump_bfin_mem(struct pt_regs *fp) addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; addr++) { if (!((unsigned long)addr & 0xF)) - verbose_printk("\n" KERN_NOTICE "0x%p: ", addr); + verbose_printk(KERN_NOTICE "0x%p: ", addr); if (!get_instruction(&val, addr)) { val = 0; @@ -1056,9 +1055,9 @@ void dump_bfin_mem(struct pt_regs *fp) oops_in_progress)){ verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n" - KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" - " better idea where it came from\n"); + verbose_printk(KERN_NOTICE +"The remaining message may be meaningless\n" +"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); #else /* If we are handling only one peripheral interrupt * and current mm and pid are valid, and the last error @@ -1114,9 +1113,10 @@ void show_regs(struct pt_regs *fp) verbose_printk(KERN_NOTICE "%s", linux_banner); - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); + verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", + print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", - (long)fp->seqstat, fp->ipend, fp->syscfg); + (long)fp->seqstat, fp->ipend, fp->syscfg); if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); @@ -1184,7 +1184,7 @@ unlock: verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); } - verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n"); + verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n"); verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", fp->r0, fp->r1, fp->r2, fp->r3); verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 8a5bd7a9c6f..b86e19c9b5b 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -7,6 +7,7 @@ config FRV default y select HAVE_IDE select HAVE_ARCH_TRACEHOOK + select HAVE_PERF_COUNTERS config ZONE_DMA bool diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index 0409d981fd3..00a57af79af 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v) #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) #define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) +/* + * 64-bit atomic ops + */ +typedef struct { + volatile long long counter; +} atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +static inline long long atomic64_read(atomic64_t *v) +{ + long long counter; + + asm("ldd%I1 %M1,%0" + : "=e"(counter) + : "m"(v->counter)); + return counter; +} + +static inline void atomic64_set(atomic64_t *v, long long i) +{ + asm volatile("std%I0 %1,%M0" + : "=m"(v->counter) + : "e"(i)); +} + +extern long long atomic64_inc_return(atomic64_t *v); +extern long long atomic64_dec_return(atomic64_t *v); +extern long long atomic64_add_return(long long i, atomic64_t *v); +extern long long atomic64_sub_return(long long i, atomic64_t *v); + +static inline long long atomic64_add_negative(long long i, atomic64_t *v) +{ + return atomic64_add_return(i, v) < 0; +} + +static inline void atomic64_add(long long i, atomic64_t *v) +{ + atomic64_add_return(i, v); +} + +static inline void atomic64_sub(long long i, atomic64_t *v) +{ + atomic64_sub_return(i, v); +} + +static inline void atomic64_inc(atomic64_t *v) +{ + atomic64_inc_return(v); +} + +static inline void atomic64_dec(atomic64_t *v) +{ + atomic64_dec_return(v); +} + +#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) +#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0) + /*****************************************************************************/ /* * exchange value with memory */ +extern uint64_t __xchg_64(uint64_t i, volatile void *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define xchg(ptr, x) \ @@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v); #define tas(ptr) (xchg((ptr), 1)) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new)) +#define atomic_xchg(v, new) (xchg(&(v)->counter, new)) +#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter)) +#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter)) static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) { diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h new file mode 100644 index 00000000000..ccf726e61b2 --- /dev/null +++ b/arch/frv/include/asm/perf_counter.h @@ -0,0 +1,17 @@ +/* FRV performance counter support + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PERF_COUNTER_H +#define _ASM_PERF_COUNTER_H + +#define PERF_COUNTER_INDEX_OFFSET 0 + +#endif /* _ASM_PERF_COUNTER_H */ diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h index 7742ec000cc..efd22d9077a 100644 --- a/arch/frv/include/asm/system.h +++ b/arch/frv/include/asm/system.h @@ -208,6 +208,8 @@ extern void free_initmem(void); * - if (*ptr == test) then orig = *ptr; *ptr = test; * - if (*ptr != test) then orig = *ptr; */ +extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v); + #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS #define cmpxchg(ptr, test, new) \ diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index 96d78d5d2c4..4a8fb427ce0 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -341,10 +341,12 @@ #define __NR_inotify_init1 332 #define __NR_preadv 333 #define __NR_pwritev 334 +#define __NR_rt_tgsigqueueinfo 335 +#define __NR_perf_counter_open 336 #ifdef __KERNEL__ -#define NR_syscalls 335 +#define NR_syscalls 337 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 356e0e327a8..fde1e446b44 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1524,5 +1524,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_rt_tgsigqueueinfo /* 335 */ + .long sys_perf_counter_open syscall_table_size = (. - sys_call_table) diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c index 0316b3c50ef..a89803b58b9 100644 --- a/arch/frv/kernel/frv_ksyms.c +++ b/arch/frv/kernel/frv_ksyms.c @@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return); EXPORT_SYMBOL(__xchg_32); EXPORT_SYMBOL(__cmpxchg_32); #endif +EXPORT_SYMBOL(atomic64_add_return); +EXPORT_SYMBOL(atomic64_sub_return); +EXPORT_SYMBOL(__xchg_64); +EXPORT_SYMBOL(__cmpxchg_64); EXPORT_SYMBOL(__debug_bug_printk); EXPORT_SYMBOL(__delay_loops_MHz); diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile index 08be305c9f4..0a377210c89 100644 --- a/arch/frv/lib/Makefile +++ b/arch/frv/lib/Makefile @@ -4,5 +4,5 @@ lib-y := \ __ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \ - checksum.o memcpy.o memset.o atomic-ops.o \ - outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o + checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \ + outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S index ee0ac905fb0..5e9e6ab5dd0 100644 --- a/arch/frv/lib/atomic-ops.S +++ b/arch/frv/lib/atomic-ops.S @@ -163,11 +163,10 @@ __cmpxchg_32: ld.p @(gr11,gr0),gr8 orcr cc7,cc7,cc3 subcc gr8,gr9,gr7,icc0 - bne icc0,#0,1f + bnelr icc0,#0 cst.p gr10,@(gr11,gr0) ,cc3,#1 corcc gr29,gr29,gr0 ,cc3,#1 beq icc3,#0,0b -1: bralr .size __cmpxchg_32, .-__cmpxchg_32 diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S new file mode 100644 index 00000000000..b6194eeac12 --- /dev/null +++ b/arch/frv/lib/atomic64-ops.S @@ -0,0 +1,162 @@ +/* kernel atomic64 operations + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/spr-regs.h> + + .text + .balign 4 + + +############################################################################### +# +# long long atomic64_inc_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_inc_return + .type atomic64_inc_return,@function +atomic64_inc_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addicc gr9,#1,gr9,icc0 + addxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_inc_return, .-atomic64_inc_return + +############################################################################### +# +# long long atomic64_dec_return(atomic64_t *v) +# +############################################################################### + .globl atomic64_dec_return + .type atomic64_dec_return,@function +atomic64_dec_return: + or.p gr8,gr8,gr10 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subicc gr9,#1,gr9,icc0 + subxi gr8,#0,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_dec_return, .-atomic64_dec_return + +############################################################################### +# +# long long atomic64_add_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_add_return + .type atomic64_add_return,@function +atomic64_add_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + addcc gr9,gr5,gr9,icc0 + addx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_add_return, .-atomic64_add_return + +############################################################################### +# +# long long atomic64_sub_return(long long i, atomic64_t *v) +# +############################################################################### + .globl atomic64_sub_return + .type atomic64_sub_return,@function +atomic64_sub_return: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + subcc gr9,gr5,gr9,icc0 + subx gr8,gr4,gr8,icc0 + cstd.p gr8,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size atomic64_sub_return, .-atomic64_sub_return + +############################################################################### +# +# uint64_t __xchg_64(uint64_t i, uint64_t *v) +# +############################################################################### + .globl __xchg_64 + .type __xchg_64,@function +__xchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 /* set CC3 to true */ + cstd.p gr4,@(gr10,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __xchg_64, .-__xchg_64 + +############################################################################### +# +# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v) +# +############################################################################### + .globl __cmpxchg_64 + .type __cmpxchg_64,@function +__cmpxchg_64: + or.p gr8,gr8,gr4 + or gr9,gr9,gr5 +0: + orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ + ckeq icc3,cc7 + ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */ + orcr cc7,cc7,cc3 + subcc gr8,gr4,gr0,icc0 + subcc.p gr9,gr5,gr0,icc1 + bnelr icc0,#0 + bnelr icc1,#0 + cstd.p gr10,@(gr12,gr0) ,cc3,#1 + corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ + beq icc3,#0,0b + bralr + + .size __cmpxchg_64, .-__cmpxchg_64 + diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c new file mode 100644 index 00000000000..2000feecd57 --- /dev/null +++ b/arch/frv/lib/perf_counter.c @@ -0,0 +1,19 @@ +/* Performance counter handling + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include <linux/perf_counter.h> + +/* + * mark the performance counter as pending + */ +void set_perf_counter_pending(void) +{ +} diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c index ebf4e988e78..d5764a3d74a 100644 --- a/arch/ia64/kernel/esi.c +++ b/arch/ia64/kernel/esi.c @@ -65,7 +65,7 @@ static int __init esi_init (void) } if (!esi) - return -ENODEV;; + return -ENODEV; systab = __va(esi); diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index abce2468a40..f1782705b1f 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg) * /proc/perfmon interface, for debug only */ -#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1) +#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1) static void * pfm_proc_start(struct seq_file *m, loff_t *pos) diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 7053c55b764..e6676fca482 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms { static void salinfo_work_to_do(struct salinfo_data *data) { - down_trylock(&data->mutex); + (void)(down_trylock(&data->mutex) ?: 0); up(&data->mutex); } diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c index a85cb611ecd..f1268b8e6f9 100644 --- a/arch/ia64/kvm/kvm_lib.c +++ b/arch/ia64/kvm/kvm_lib.c @@ -11,5 +11,11 @@ * */ #undef CONFIG_MODULES +#include <linux/module.h> +#undef CONFIG_KALLSYMS +#undef EXPORT_SYMBOL +#undef EXPORT_SYMBOL_GPL +#define EXPORT_SYMBOL(sym) +#define EXPORT_SYMBOL_GPL(sym) #include "../../../lib/vsprintf.c" #include "../../../lib/ctype.c" diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c index a8f84da04b4..bb862fb224f 100644 --- a/arch/ia64/kvm/process.c +++ b/arch/ia64/kvm/process.c @@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu) if (vdcr & IA64_DCR_PP) { vpsr |= IA64_PSR_PP; } else { - vpsr &= ~IA64_PSR_PP;; + vpsr &= ~IA64_PSR_PP; } vcpu_set_psr(vcpu, vpsr); @@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu) p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30); break; case PAL_BRAND_INFO: - p->u.pal_data.gr29 = gr29;; + p->u.pal_data.gr29 = gr29; p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30); break; default: - p->u.pal_data.gr29 = gr29;; + p->u.pal_data.gr29 = gr29; p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30); } p->u.pal_data.gr28 = gr28; diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c index a2c6c15e476..46b02cbcc87 100644 --- a/arch/ia64/kvm/vcpu.c +++ b/arch/ia64/kvm/vcpu.c @@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val, * Now look at registers in [0-31] range and init correct UNAT */ addr = (unsigned long)regs; - unat = ®s->eml_unat;; + unat = ®s->eml_unat; addr += gr_info[regnum]; diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c index 4290a429bf7..20b3852f7a6 100644 --- a/arch/ia64/kvm/vtlb.c +++ b/arch/ia64/kvm/vtlb.c @@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type) u64 rid; rid = vcpu_get_rr(vcpu, va); - rid = rid & RR_RID_MASK;; + rid = rid & RR_RID_MASK; if (type == D_TLB) { if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) { for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0; @@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data) struct thash_cb *hcb = &v->arch.vtlb; - cch = __vtr_lookup(v, va, is_data);; + cch = __vtr_lookup(v, va, is_data); if (cch) return cch; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 729298f4b23..7de76dd352f 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res, /* * PCI BIOS setup, always defaults to SAL interface */ -char * __devinit +char * __init pcibios_setup (char *str) { return str; diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 76645cf6ac5..25831c47c57 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address) bricktype = MODULE_GET_BTYPE(moduleid); if ((bricktype == L1_BRICKTYPE_191010) || (bricktype == L1_BRICKTYPE_1932)) - sprintf(address, "%s^%d", address, geo_slot(geoid)); + sprintf(address + strlen(address), "^%d", + geo_slot(geoid)); } void __devinit diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 1e96c6eb631..8f8f4abab2f 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -290,7 +290,7 @@ void dump(struct pt_regs *fp) unsigned char *tp; int i; - printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\nCURRENT PROCESS:\n\n"); printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid); if (current->mm) { @@ -301,8 +301,7 @@ void dump(struct pt_regs *fp) (int) current->mm->end_data, (int) current->mm->end_data, (int) current->mm->brk); - printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n" - KERN_EMERG "\n", + printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n", (int) current->mm->start_stack, (int)(((unsigned long) current) + THREAD_SIZE)); } @@ -313,35 +312,35 @@ void dump(struct pt_regs *fp) fp->d0, fp->d1, fp->d2, fp->d3); printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", fp->d4, fp->d5, fp->a0, fp->a1); - printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n", + printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n", (unsigned int) rdusp(), (unsigned int) fp); - printk(KERN_EMERG "\n" KERN_EMERG "CODE:"); + printk(KERN_EMERG "\nCODE:"); tp = ((unsigned char *) fp->pc) - 0x20; for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); printk(KERN_EMERG "KERNEL STACK:"); tp = ((unsigned char *) fp) - 0x40; for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); printk(KERN_EMERG "USER STACK:"); tp = (unsigned char *) (rdusp() - 0x10); for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) { if ((i % 0x10) == 0) - printk("\n" KERN_EMERG "%08x: ", (int) (tp + i)); + printk(KERN_EMERG "%08x: ", (int) (tp + i)); printk("%08x ", (int) *sp++); } - printk("\n" KERN_EMERG "\n"); + printk(KERN_EMERG "\n"); } /* diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index 51d325343ab..3739c8f657d 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i) if (i % 5) printk(KERN_CONT " [%08lx] ", addr); else - printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr); + printk(KERN_EMERG " [%08lx] ", addr); i++; #endif } @@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack) if (stack + 1 + i > endstack) break; if (i % 8 == 0) - printk("\n" KERN_EMERG " "); - printk(" %08lx", *(stack + i)); + printk(KERN_EMERG " "); + printk(KERN_CONT " %08lx", *(stack + i)); } printk("\n"); i = 0; diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index b50b845fdd5..2db722d80d4 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ config GENERIC_GPIO def_bool y +config GENERIC_CSUM + def_bool y + config PCI def_bool n diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h index 0de612ad7cb..6d2e1d418be 100644 --- a/arch/microblaze/include/asm/atomic.h +++ b/arch/microblaze/include/asm/atomic.h @@ -1,95 +1,7 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - #ifndef _ASM_MICROBLAZE_ATOMIC_H #define _ASM_MICROBLAZE_ATOMIC_H -#include <linux/types.h> -#include <linux/compiler.h> /* likely */ -#include <asm/system.h> /* local_irq_XXX and friends */ - -#define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = (i)) - -#define atomic_inc(v) (atomic_add_return(1, (v))) -#define atomic_dec(v) (atomic_sub_return(1, (v))) - -#define atomic_add(i, v) (atomic_add_return(i, (v))) -#define atomic_sub(i, v) (atomic_sub_return(i, (v))) - -#define atomic_inc_return(v) (atomic_add_return(1, (v))) -#define atomic_dec_return(v) (atomic_sub_return(1, (v))) - -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - - c = atomic_read(v); - while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) - c = old; - return c != u; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - local_irq_save(flags); - *addr &= ~mask; - local_irq_restore(flags); -} - -/** - * atomic_add_return - add and return - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and returns @i + @v - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int val; - - local_irq_save(flags); - val = v->counter; - v->counter = val += i; - local_irq_restore(flags); - - return val; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - return atomic_add_return(-i, v); -} +#include <asm-generic/atomic.h> /* * Atomically test *v and decrement if it is greater than 0. @@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v) return res; } -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include <asm-generic/atomic-long.h> - #endif /* _ASM_MICROBLAZE_ATOMIC_H */ diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h index d6df1fd4e1e..a72468f15c8 100644 --- a/arch/microblaze/include/asm/bitops.h +++ b/arch/microblaze/include/asm/bitops.h @@ -1,27 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BITOPS_H -#define _ASM_MICROBLAZE_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include <asm/byteorder.h> /* swab32 */ -#include <asm/system.h> /* save_flags */ - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() #include <asm-generic/bitops.h> -#include <asm-generic/bitops/__fls.h> - -#endif /* _ASM_MICROBLAZE_BITOPS_H */ diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h index 8eb2cdde11d..b12fd89e42e 100644 --- a/arch/microblaze/include/asm/bug.h +++ b/arch/microblaze/include/asm/bug.h @@ -1,15 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BUG_H -#define _ASM_MICROBLAZE_BUG_H - -#include <linux/kernel.h> #include <asm-generic/bug.h> - -#endif /* _ASM_MICROBLAZE_BUG_H */ diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h index f2c6593653f..61791e1ad9f 100644 --- a/arch/microblaze/include/asm/bugs.h +++ b/arch/microblaze/include/asm/bugs.h @@ -1,17 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BUGS_H -#define _ASM_MICROBLAZE_BUGS_H - -static inline void check_bugs(void) -{ - /* nothing to do */ -} - -#endif /* _ASM_MICROBLAZE_BUGS_H */ +#include <asm-generic/bugs.h> diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h index 97ea46b5cf8..128bf03b54b 100644 --- a/arch/microblaze/include/asm/checksum.h +++ b/arch/microblaze/include/asm/checksum.h @@ -10,12 +10,11 @@ #ifndef _ASM_MICROBLAZE_CHECKSUM_H #define _ASM_MICROBLAZE_CHECKSUM_H -#include <linux/in6.h> - /* * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ +#define csum_tcpudp_nofold csum_tcpudp_nofold static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) @@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, return sum; } -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy(const void *src, void *dst, int len, - __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy((src), (dst), (len), (sum)) - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); +#include <asm-generic/checksum.h> #endif /* _ASM_MICROBLAZE_CHECKSUM_H */ diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h new file mode 100644 index 00000000000..3a4988e8df4 --- /dev/null +++ b/arch/microblaze/include/asm/fb.h @@ -0,0 +1 @@ +#include <asm-generic/fb.h> diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h index 0f2d6b013e1..41e1e1aa36a 100644 --- a/arch/microblaze/include/asm/hardirq.h +++ b/arch/microblaze/include/asm/hardirq.h @@ -9,21 +9,11 @@ #ifndef _ASM_MICROBLAZE_HARDIRQ_H #define _ASM_MICROBLAZE_HARDIRQ_H -#include <linux/cache.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/current.h> -#include <linux/ptrace.h> - /* should be defined in each interrupt controller driver */ extern unsigned int get_irq(struct pt_regs *regs); -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - +#define ack_bad_irq ack_bad_irq void ack_bad_irq(unsigned int irq); - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ +#include <asm-generic/hardirq.h> #endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h index 03582b24920..ec34c760665 100644 --- a/arch/microblaze/include/asm/ioctls.h +++ b/arch/microblaze/include/asm/ioctls.h @@ -1,91 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_IOCTLS_H -#define _ASM_MICROBLAZE_IOCTLS_H - -#include <linux/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -/* Get Pty Number (of pty-mux device) */ -#define TIOCGPTN _IOR('T', 0x30, unsigned int) -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_MICROBLAZE_IOCTLS_H */ +#include <asm-generic/ioctls.h> diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h index b056fa42065..84c7e51cb6d 100644 --- a/arch/microblaze/include/asm/ipcbuf.h +++ b/arch/microblaze/include/asm/ipcbuf.h @@ -1,36 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_IPCBUF_H -#define _ASM_MICROBLAZE_IPCBUF_H - -/* - * The user_ipc_perm structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm { - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_MICROBLAZE_IPCBUF_H */ +#include <asm-generic/ipcbuf.h> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index db515deaa72..90f050535eb 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -10,6 +10,7 @@ #define _ASM_MICROBLAZE_IRQ_H #define NR_IRQS 32 +#include <asm-generic/irq.h> #include <linux/interrupt.h> @@ -17,11 +18,6 @@ extern unsigned int nr_irq; #define NO_IRQ (-1) -static inline int irq_canonicalize(int irq) -{ - return irq; -} - struct pt_regs; extern void do_IRQ(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h index 4914b132944..8eebf89f5ab 100644 --- a/arch/microblaze/include/asm/mman.h +++ b/arch/microblaze/include/asm/mman.h @@ -1,25 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MMAN_H -#define _ASM_MICROBLAZE_MMAN_H - #include <asm-generic/mman.h> - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* _ASM_MICROBLAZE_MMAN_H */ diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h index 66cad6a99d7..8d6a654ceff 100644 --- a/arch/microblaze/include/asm/mmu.h +++ b/arch/microblaze/include/asm/mmu.h @@ -12,12 +12,7 @@ #define _ASM_MICROBLAZE_MMU_H # ifndef CONFIG_MMU -# ifndef __ASSEMBLY__ -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; -# endif /* __ASSEMBLY__ */ +# include <asm-generic/mmu.h> # else /* CONFIG_MMU */ # ifdef __KERNEL__ # ifndef __ASSEMBLY__ diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h index 385fed16bbf..24eab1674d3 100644 --- a/arch/microblaze/include/asm/mmu_context.h +++ b/arch/microblaze/include/asm/mmu_context.h @@ -1,5 +1,5 @@ #ifdef CONFIG_MMU # include "mmu_context_mm.h" #else -# include "mmu_context_no.h" +# include <asm-generic/mmu_context.h> #endif diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h deleted file mode 100644 index ba556719015..00000000000 --- a/arch/microblaze/include/asm/mmu_context_no.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2008-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H -#define _ASM_MICROBLAZE_MMU_CONTEXT_H - -# define init_new_context(tsk, mm) ({ 0; }) - -# define enter_lazy_tlb(mm, tsk) do {} while (0) -# define change_mm_context(old, ctx, _pml4) do {} while (0) -# define destroy_context(mm) do {} while (0) -# define deactivate_mm(tsk, mm) do {} while (0) -# define switch_mm(prev, next, tsk) do {} while (0) -# define activate_mm(prev, next) do {} while (0) - -#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */ diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h index 914565a9031..7be1347fce4 100644 --- a/arch/microblaze/include/asm/module.h +++ b/arch/microblaze/include/asm/module.h @@ -9,6 +9,8 @@ #ifndef _ASM_MICROBLAZE_MODULE_H #define _ASM_MICROBLAZE_MODULE_H +#include <asm-generic/module.h> + /* Microblaze Relocations */ #define R_MICROBLAZE_NONE 0 #define R_MICROBLAZE_32 1 @@ -24,14 +26,6 @@ /* Keep this the last entry. */ #define R_MICROBLAZE_NUM 11 -struct mod_arch_specific { - int foo; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - typedef struct { volatile int counter; } module_t; #endif /* _ASM_MICROBLAZE_MODULE_H */ diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h index 09dd9709721..809134c644a 100644 --- a/arch/microblaze/include/asm/msgbuf.h +++ b/arch/microblaze/include/asm/msgbuf.h @@ -1,31 +1 @@ -#ifndef _ASM_MICROBLAZE_MSGBUF_H -#define _ASM_MICROBLAZE_MSGBUF_H - -/* - * The msqid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MICROBLAZE_MSGBUF_H */ +#include <asm-generic/msgbuf.h> diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h index 8c538a49616..965d4542797 100644 --- a/arch/microblaze/include/asm/param.h +++ b/arch/microblaze/include/asm/param.h @@ -1,30 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_PARAM_H -#define _ASM_MICROBLAZE_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* internal kernel timer frequency */ -#define USER_HZ 100 /* for user interfaces in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __KERNEL__ */ - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_MICROBLAZE_PARAM_H */ +#include <asm-generic/param.h> diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h new file mode 100644 index 00000000000..cf252af6459 --- /dev/null +++ b/arch/microblaze/include/asm/parport.h @@ -0,0 +1 @@ +#include <asm-generic/parport.h> diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index ca03794cf3f..9f0df5faf2c 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -1 +1 @@ -#include <linux/io.h> +#include <asm-generic/pci.h> diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h index 8c758b231f3..0e15039673e 100644 --- a/arch/microblaze/include/asm/posix_types.h +++ b/arch/microblaze/include/asm/posix_types.h @@ -1,73 +1,9 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H #define _ASM_MICROBLAZE_POSIX_TYPES_H -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; typedef unsigned short __kernel_mode_t; -typedef unsigned int __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char *__kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned int __kernel_old_uid_t; -typedef unsigned int __kernel_old_gid_t; -typedef unsigned int __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp))) +#define __kernel_mode_t __kernel_mode_t -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#include <asm-generic/posix_types.h> #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */ diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h index 08ff1d049b4..35d786fe93a 100644 --- a/arch/microblaze/include/asm/scatterlist.h +++ b/arch/microblaze/include/asm/scatterlist.h @@ -1,28 +1 @@ -/* - * Copyright (C) 2008 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SCATTERLIST_H -#define _ASM_MICROBLAZE_SCATTERLIST_H - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - dma_addr_t dma_address; - unsigned int offset; - unsigned int length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (~0UL) - -#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */ +#include <asm-generic/scatterlist.h> diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h index b804ed71a57..7673b83cfef 100644 --- a/arch/microblaze/include/asm/sembuf.h +++ b/arch/microblaze/include/asm/sembuf.h @@ -1,34 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SEMBUF_H -#define _ASM_MICROBLAZE_SEMBUF_H - -/* - * The semid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - - -#endif /* _ASM_MICROBLAZE_SEMBUF_H */ +#include <asm-generic/sembuf.h> diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h index 39bfc8ce6af..a0cb0caff15 100644 --- a/arch/microblaze/include/asm/serial.h +++ b/arch/microblaze/include/asm/serial.h @@ -1,14 +1 @@ -/* - * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SERIAL_H -#define _ASM_MICROBLAZE_SERIAL_H - -# define BASE_BAUD (1843200 / 16) - -#endif /* _ASM_MICROBLAZE_SERIAL_H */ +#include <asm-generic/serial.h> diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h index f829c584361..83c05fc2de3 100644 --- a/arch/microblaze/include/asm/shmbuf.h +++ b/arch/microblaze/include/asm/shmbuf.h @@ -1,42 +1 @@ -#ifndef _ASM_MICROBLAZE_SHMBUF_H -#define _ASM_MICROBLAZE_SHMBUF_H - -/* - * The shmid64_ds structure for microblaze architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_MICROBLAZE_SHMBUF_H */ +#include <asm-generic/shmbuf.h> diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h index 9f5fc2b3b6a..93f30deb95d 100644 --- a/arch/microblaze/include/asm/shmparam.h +++ b/arch/microblaze/include/asm/shmparam.h @@ -1,6 +1 @@ -#ifndef _ASM_MICROBLAZE_SHMPARAM_H -#define _ASM_MICROBLAZE_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_MICROBLAZE_SHMPARAM_H */ +#include <asm-generic/shmparam.h> diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h index f162911a8f5..0815d29d82e 100644 --- a/arch/microblaze/include/asm/siginfo.h +++ b/arch/microblaze/include/asm/siginfo.h @@ -1,15 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SIGINFO_H -#define _ASM_MICROBLAZE_SIGINFO_H - -#include <linux/types.h> #include <asm-generic/siginfo.h> - -#endif /* _ASM_MICROBLAZE_SIGINFO_H */ diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h index 46bc2267d94..7b1573ce19d 100644 --- a/arch/microblaze/include/asm/signal.h +++ b/arch/microblaze/include/asm/signal.h @@ -1,165 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * Yasushi SHOJI <yashi@atmark-techno.com> - * Tetsuya OHKAWA <tetsuya@atmark-techno.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SIGNAL_H -#define _ASM_MICROBLAZE_SIGNAL_H - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -# ifndef __ASSEMBLY__ -# include <linux/types.h> -# include <asm-generic/signal-defs.h> - -/* Avoid too many header ordering problems. */ -struct siginfo; - -# ifdef __KERNEL__ -/* - * Most things should be clean enough to redefine this at will, if care - * is taken to make libc match. - */ -# define _NSIG 64 -# define _NSIG_BPW 32 -# define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -# include <asm/sigcontext.h> -# undef __HAVE_ARCH_SIG_BITOPS - -# define ptrace_signal_deliver(regs, cookie) do { } while (0) - -# else /* !__KERNEL__ */ - -/* Here we must cater to libcs that poke about in kernel headers. */ - -# define NSIG 32 -typedef unsigned long sigset_t; - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -# define sa_handler _u._sa_handler -# define sa_sigaction _u._sa_sigaction - -# endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_SIGNAL_H */ +#include <asm-generic/signal.h> diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h index 82593686031..6b71384b9d8 100644 --- a/arch/microblaze/include/asm/socket.h +++ b/arch/microblaze/include/asm/socket.h @@ -1,69 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SOCKET_H -#define _ASM_MICROBLAZE_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 - -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#endif /* _ASM_MICROBLAZE_SOCKET_H */ +#include <asm-generic/socket.h> diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h index 9fff57a701e..def6d4746ee 100644 --- a/arch/microblaze/include/asm/sockios.h +++ b/arch/microblaze/include/asm/sockios.h @@ -1,23 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SOCKIOS_H -#define _ASM_MICROBLAZE_SOCKIOS_H - -#include <linux/ioctl.h> - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_MICROBLAZE_SOCKIOS_H */ +#include <asm-generic/sockios.h> diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h index a15f77520bf..3dc90fa92c7 100644 --- a/arch/microblaze/include/asm/stat.h +++ b/arch/microblaze/include/asm/stat.h @@ -1,68 +1 @@ -/* - * Microblaze stat structure - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef _ASM_MICROBLAZE_STAT_H -#define _ASM_MICROBLAZE_STAT_H - -#include <linux/posix_types.h> - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long st_rdev; - unsigned long __pad1; - long st_size; - int st_blksize; - int __pad2; - long st_blocks; - int st_atime; - unsigned int st_atime_nsec; - int st_mtime; - unsigned int st_mtime_nsec; - int st_ctime; - unsigned int st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned long long __pad1; - long long st_size; /* Size of file, in bytes. */ - int st_blksize; /* Optimal block size for I/O. */ - int __pad2; - long long st_blocks; /* Number 512-byte blocks allocated. */ - int st_atime; /* Time of last access. */ - unsigned int st_atime_nsec; - int st_mtime; /* Time of last modification. */ - unsigned int st_mtime_nsec; - int st_ctime; /* Time of last status change. */ - unsigned int st_ctime_nsec; - unsigned int __unused4; - unsigned int __unused5; -}; - -#endif /* _ASM_MICROBLAZE_STAT_H */ - +#include <asm-generic/stat.h> diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h index b375d7b65ad..7847e563ab6 100644 --- a/arch/microblaze/include/asm/swab.h +++ b/arch/microblaze/include/asm/swab.h @@ -1,8 +1 @@ -#ifndef _ASM_MICROBLAZE_SWAB_H -#define _ASM_MICROBLAZE_SWAB_H - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -#define __SWAB_64_THRU_32__ -#endif - -#endif /* _ASM_MICROBLAZE_SWAB_H */ +#include <asm-generic/swab.h> diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h index ddea9eb31f8..720761cc741 100644 --- a/arch/microblaze/include/asm/syscalls.h +++ b/arch/microblaze/include/asm/syscalls.h @@ -1,48 +1,8 @@ #ifndef __ASM_MICROBLAZE_SYSCALLS_H -#define __ASM_MICROBLAZE_SYSCALLS_H -#ifdef __KERNEL__ -#include <linux/compiler.h> -#include <linux/linkage.h> -#include <linux/types.h> -#include <linux/signal.h> +asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs); +#define sys_clone sys_clone -/* FIXME will be removed */ -asmlinkage int sys_ipc(uint call, int first, int second, - int third, void *ptr, long fifth); +#include <asm-generic/syscalls.h> -struct pt_regs; -asmlinkage int sys_vfork(struct pt_regs *regs); -asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs); -asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, - char __user *__user *envp, struct pt_regs *regs); - -asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); - -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset); - -/* from signal.c */ -asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs); - -asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, - struct pt_regs *regs); - -asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact); - -asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, size_t sigsetsize); - -asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - struct pt_regs *regs); - -asmlinkage int sys_sigreturn(struct pt_regs *regs); - -asmlinkage int sys_rt_sigreturn(struct pt_regs *regs); - -#endif /* __KERNEL__ */ #endif /* __ASM_MICROBLAZE_SYSCALLS_H */ diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index c4e308850b5..b1ed6159066 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -13,6 +13,9 @@ #include <asm/setup.h> #include <asm/irqflags.h> +#include <asm-generic/cmpxchg.h> +#include <asm-generic/cmpxchg-local.h> + struct task_struct; struct thread_info; diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h index a1b64bc4724..3935b106de7 100644 --- a/arch/microblaze/include/asm/termbits.h +++ b/arch/microblaze/include/asm/termbits.h @@ -1,203 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TERMBITS_H -#define _ASM_MICROBLAZE_TERMBITS_H - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define BOTHER 0010000 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_MICROBLAZE_TERMBITS_H */ +#include <asm-generic/termbits.h> diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h index 47a46d1fbe2..280d78a9d96 100644 --- a/arch/microblaze/include/asm/termios.h +++ b/arch/microblaze/include/asm/termios.h @@ -1,88 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TERMIOS_H -#define _ASM_MICROBLAZE_TERMIOS_H - -#include <linux/string.h> -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* Modem lines */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -/* Line disciplines */ - -#define N_TTY 0 -#define N_SLIP 1 -#define N_MOUSE 2 -#define N_PPP 3 -#define N_STRIP 4 -#define N_AX25 5 -#define N_X25 6 /* X.25 async */ -#define N_6PACK 7 -#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */ -#define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */ -#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ -#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards - about SMS messages */ -#define N_HDLC 13 /* synchronous HDLC */ -#define N_SYNC_PPP 14 -#define N_HCI 15 /* Bluetooth HCI UART */ - -#ifdef __KERNEL__ - -#include <asm-generic/termios-base.h> - -#endif /* __KERNEL__ */ - -#endif /* _ASM_MICROBLAZE_TERMIOS_H */ +#include <asm-generic/termios.h> diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h index 678525dc6d0..befcf3de553 100644 --- a/arch/microblaze/include/asm/timex.h +++ b/arch/microblaze/include/asm/timex.h @@ -9,10 +9,8 @@ #ifndef _ASM_MICROBLAZE_TIMEX_H #define _ASM_MICROBLAZE_TIMEX_H -#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ - -typedef unsigned long cycles_t; +#include <asm-generic/timex.h> -#define get_cycles() (0) +#define CLOCK_TICK_RATE 1000 /* Timer input freq. */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h index bebc018318f..b9e79bc580d 100644 --- a/arch/microblaze/include/asm/types.h +++ b/arch/microblaze/include/asm/types.h @@ -1,38 +1 @@ -/* - * Copyright (C) Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_TYPES_H -#define _ASM_MICROBLAZE_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ - -#include <asm-generic/int-ll64.h> - -# ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -# ifdef __KERNEL__ -# define BITS_PER_LONG 32 - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -# endif/* __KERNEL__ */ -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_TYPES_H */ +#include <asm-generic/types.h> diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h index 11f6bb3ae3a..9bc07b9f30f 100644 --- a/arch/microblaze/include/asm/ucontext.h +++ b/arch/microblaze/include/asm/ucontext.h @@ -1,22 +1 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_UCONTEXT_H -#define _ASM_MICROBLAZE_UCONTEXT_H - -#include <asm/sigcontext.h> - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_MICROBLAZE_UCONTEXT_H */ +#include <asm-generic/ucontext.h> diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index b5e2f5fa5c5..0b852327c0e 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -380,8 +380,10 @@ #define __NR_accept04 362 /* new */ #define __NR_preadv 363 /* new */ #define __NR_pwritev 364 /* new */ +#define __NR_rt_tgsigqueueinfo 365 /* new */ +#define __NR_perf_counter_open 366 /* new */ -#define __NR_syscalls 365 +#define __NR_syscalls 367 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -408,7 +410,7 @@ #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_RT_SIGACTION -/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */ +#define __ARCH_WANT_SYS_RT_SIGSUSPEND /* * "Conditional" syscalls diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h index 8b137891791..89d82fd8fcf 100644 --- a/arch/microblaze/include/asm/vga.h +++ b/arch/microblaze/include/asm/vga.h @@ -1 +1 @@ - +#include <asm-generic/vga.h> diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 1fce6b803f5..9083d85376a 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -551,30 +551,22 @@ no_work_pending: rtid r14, 0 nop -sys_vfork_wrapper: - brid sys_vfork +sys_vfork: + brid microblaze_vfork addk r5, r1, r0 -sys_clone_wrapper: - brid sys_clone +sys_clone: + brid microblaze_clone addk r7, r1, r0 -sys_execve_wrapper: - brid sys_execve +sys_execve: + brid microblaze_execve addk r8, r1, r0 -sys_sigreturn_wrapper: - brid sys_sigreturn - addk r5, r1, r0 - sys_rt_sigreturn_wrapper: brid sys_rt_sigreturn addk r5, r1, r0 -sys_sigsuspend_wrapper: - brid sys_rt_sigsuspend - addk r6, r1, r0 - sys_rt_sigsuspend_wrapper: brid sys_rt_sigsuspend addk r7, r1, r0 diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 91a0e7b185d..c7353e79f4a 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork): brid ret_from_trap; /* Do normal trap return */ nop; -C_ENTRY(sys_vfork_wrapper): +C_ENTRY(sys_vfork): + brid microblaze_vfork /* Do real work (tail-call) */ la r5, r1, PTO - brid sys_vfork /* Do real work (tail-call) */ - nop -C_ENTRY(sys_clone_wrapper): +C_ENTRY(sys_clone): bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */ 1: la r7, r1, PTO; /* Arg 2: parent context */ @@ -444,20 +443,9 @@ C_ENTRY(sys_clone_wrapper): brid do_fork /* Do real work (tail-call) */ nop; -C_ENTRY(sys_execve_wrapper): +C_ENTRY(sys_execve): la r8, r1, PTO; /* add user context as 4th arg */ - brid sys_execve; /* Do real work (tail-call).*/ - nop; - -C_ENTRY(sys_sigsuspend_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r6, r1, PTO; /* add user context as 2nd arg */ - bralid r15, sys_sigsuspend; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ + brid microblaze_execve; /* Do real work (tail-call).*/ nop; C_ENTRY(sys_rt_sigsuspend_wrapper): @@ -471,18 +459,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper): bri ret_from_trap /* fall through will not work here due to align */ nop; - -C_ENTRY(sys_sigreturn_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r5, r1, PTO; /* add user context as 1st arg */ - brlid r15, sys_sigreturn; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ - nop; - C_ENTRY(sys_rt_sigreturn_wrapper): swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ swi r4, r1, PTO+PT_R4; diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 4c0e6521b11..493819c25fb 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -45,91 +45,8 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); -/* - * Atomically swap in the new signal mask, and wait for a signal. - */ -asmlinkage int -sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs) -{ - sigset_t saveset; - - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r3 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset, 1)) - return -EINTR; - } -} - -asmlinkage int -sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, - struct pt_regs *regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->r3 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset, 1)) - return -EINTR; - } -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) - return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); - siginitset(&new_ka.sa.sa_mask, mask); - } - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) - return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); - } - - return ret; -} - -asmlinkage int +asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) { @@ -139,7 +56,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, /* * Do a signal return; undo the signal stack. */ - struct sigframe { struct sigcontext sc; unsigned long extramask[_NSIG_WORDS-1]; @@ -176,40 +92,7 @@ static int restore_sigcontext(struct pt_regs *regs, return err; } -asmlinkage int sys_sigreturn(struct pt_regs *regs) -{ - struct sigframe *frame = - (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); - - sigset_t set; - int rval; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__get_user(set.sig[0], &frame->sc.oldmask) - || (_NSIG_WORDS > 1 - && __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->sc, &rval)) - goto badframe; - return rval; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) +asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE); @@ -324,21 +207,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up to return from userspace. If provided, use a stub already in userspace. */ /* minus 8 is offset to cater for "rtsd r15,8" */ - if (ka->sa.sa_flags & SA_RESTORER) { - regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8; - } else { - /* addi r12, r0, __NR_sigreturn */ - err |= __put_user(0x31800000 | __NR_rt_sigreturn , - frame->tramp + 0); - /* brki r14, 0x8 */ - err |= __put_user(0xb9cc0008, frame->tramp + 1); - - /* Return from sighandler will jump to the tramp. - Negative 8 offset because return is rtsd r15, 8 */ - regs->r15 = ((unsigned long)frame->tramp)-8; - - __invalidate_cache_sigtramp((unsigned long)frame->tramp); - } + /* addi r12, r0, __NR_sigreturn */ + err |= __put_user(0x31800000 | __NR_rt_sigreturn , + frame->tramp + 0); + /* brki r14, 0x8 */ + err |= __put_user(0xb9cc0008, frame->tramp + 1); + + /* Return from sighandler will jump to the tramp. + Negative 8 offset because return is rtsd r15, 8 */ + regs->r15 = ((unsigned long)frame->tramp)-8; + + __invalidate_cache_sigtramp((unsigned long)frame->tramp); if (err) goto give_sigsegv; @@ -405,7 +284,7 @@ do_restart: * OK, we're invoking a handler */ -static void +static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) { @@ -426,6 +305,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } + return 1; } /* @@ -456,7 +336,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) if (kernel_mode(regs)) return 1; - if (!oldset) + if (current_thread_info()->status & TS_RESTORE_SIGMASK) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -464,13 +346,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) /* Whee! Actually deliver the signal. */ if (in_syscall) handle_restart(regs, &ka, 1); - handle_signal(signr, &ka, &info, oldset, regs); + if (handle_signal(signr, &ka, &info, oldset, regs)) { + /* + * A signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TS_RESTORE_SIGMASK flag. + */ + current_thread_info()->status &= + ~TS_RESTORE_SIGMASK; + } return 1; } if (in_syscall) handle_restart(regs, NULL, 0); + /* + * If there's no signal to deliver, we just put the saved sigmask + * back. + */ + if (current_thread_info()->status & TS_RESTORE_SIGMASK) { + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + /* Did we come from a system call? */ return 0; } diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 31905ff590b..8c9ebac5da1 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -39,7 +39,7 @@ * * This is really horribly ugly. This will be remove with new toolchain. */ -asmlinkage int +asmlinkage long sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) { int version, ret; @@ -134,20 +134,20 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) return ret; } -asmlinkage int sys_vfork(struct pt_regs *regs) +asmlinkage long microblaze_vfork(struct pt_regs *regs) { return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1, regs, 0, NULL, NULL); } -asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs) +asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs) { if (!stack) stack = regs->r1; return do_fork(flags, stack, regs, 0, NULL, NULL); } -asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv, +asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv, char __user *__user *envp, struct pt_regs *regs) { int error; @@ -163,8 +163,8 @@ out: return error; } -asmlinkage unsigned long -sys_mmap2(unsigned long addr, size_t len, +asmlinkage long +sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { @@ -189,18 +189,18 @@ out: return ret; } -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, +asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset) + unsigned long fd, off_t pgoff) { int err = -EINVAL; - if (offset & ~PAGE_MASK) { + if (pgoff & ~PAGE_MASK) { printk(KERN_INFO "no pagemask in mmap\r\n"); goto out; } - err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); out: return err; } diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 376d1789f7c..31b32a6c5f4 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -15,7 +15,7 @@ ENTRY(sys_call_table) .long sys_creat .long sys_link .long sys_unlink /* 10 */ - .long sys_execve_wrapper + .long sys_execve .long sys_chdir .long sys_time .long sys_mknod @@ -71,12 +71,12 @@ ENTRY(sys_call_table) .long sys_getppid .long sys_getpgrp /* 65 */ .long sys_setsid - .long sys_sigaction + .long sys_ni_syscall /* sys_sigaction */ .long sys_sgetmask .long sys_ssetmask .long sys_setreuid /* 70 */ .long sys_setregid - .long sys_sigsuspend_wrapper + .long sys_ni_syscall /* sys_sigsuspend_wrapper */ .long sys_sigpending .long sys_sethostname .long sys_setrlimit /* 75 */ @@ -123,8 +123,8 @@ ENTRY(sys_call_table) .long sys_sysinfo .long sys_ipc .long sys_fsync - .long sys_sigreturn_wrapper - .long sys_clone_wrapper /* 120 */ + .long sys_ni_syscall /* sys_sigreturn_wrapper */ + .long sys_clone /* 120 */ .long sys_setdomainname .long sys_newuname .long sys_ni_syscall /* modify_ldt */ @@ -194,7 +194,7 @@ ENTRY(sys_call_table) .long sys_sendfile .long sys_ni_syscall /* reserved for streams1 */ .long sys_ni_syscall /* reserved for streams2 */ - .long sys_vfork_wrapper /* 190 */ + .long sys_vfork /* 190 */ .long sys_getrlimit .long sys_mmap2 /* mmap2 */ .long sys_truncate64 @@ -369,3 +369,5 @@ ENTRY(sys_call_table) .long sys_ni_syscall .long sys_ni_syscall .long sys_ni_syscall + .long sys_rt_tgsigqueueinfo /* 365 */ + .long sys_perf_counter_open diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index 71c8cb6c9e4..b579db068c0 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -2,7 +2,7 @@ # Makefile # -lib-y := memset.o checksum.o +lib-y := memset.o ifeq ($(CONFIG_OPT_LIB_ASM),y) lib-y += fastcopy.o diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c deleted file mode 100644 index f08e7459141..00000000000 --- a/arch/microblaze/lib/checksum.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * IP/TCP/UDP checksumming routines - * - * Authors: Jorge Cwik, <jorge@laser.satlink.net> - * Arnt Gulbrandsen, <agulbra@nvg.unit.no> - * Tom May, <ftom@netcom.com> - * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> - * Lots of code moved from tcp.c and ip.c; see those files - * for more names. - * - * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: - * Fixed some nasty bugs, causing some horrible crashes. - * A: At some points, the sum (%0) was used as - * length-counter instead of the length counter - * (%1). Thanks to Roman Hodek for pointing this out. - * B: GCC seems to mess up if one uses too many - * data-registers to hold input values and one tries to - * specify d0 and d1 as scratch registers. Letting gcc - * choose these registers itself solves the problem. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access - kills, so most of the assembly has to go. */ - -#include <linux/module.h> -#include <net/checksum.h> - -#include <asm/byteorder.h> - -static inline unsigned short from32to16(unsigned long x) -{ - /* add up 16-bit and 16-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static unsigned int do_csum(const unsigned char *buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - count--; - buff += 4; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += (*buff << 8); - result = from32to16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -out: - return result; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph, ihl*4); -} -EXPORT_SYMBOL(ip_fast_csum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum wsum) -{ - unsigned int sum = (__force unsigned int)wsum; - unsigned int result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += sum; - if (sum > result) - result += 1; - return (__force __wsum)result; -} -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff, len); -} -EXPORT_SYMBOL(ip_compute_csum); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *csum_err) -{ - int missing; - - missing = __copy_from_user(dst, src, len); - if (missing) { - memset(dst + len - missing, 0, missing); - *csum_err = -EFAULT; - } else - *csum_err = 0; - - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} -EXPORT_SYMBOL(csum_partial_copy); diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index b5a701cd71e..8d92c4efe9a 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -80,15 +80,15 @@ void __init setup_memory(void) memory_size = memory_end - memory_start; PAGE_OFFSET = memory_start; printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, " - "size 0x%08x\n", __func__, memory_start, - memory_end, memory_size); + "size 0x%08x\n", __func__, (u32) memory_start, + (u32) memory_end, (u32) memory_size); break; } } if (!memory_start || !memory_end) { panic("%s: Missing memory setting 0x%08x-0x%08x\n", - __func__, memory_start, memory_end); + __func__, (u32) memory_start, (u32) memory_end); } /* reservation of region where is the kernel */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8c4be1f301c..3ca0fe1a912 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -22,6 +22,26 @@ choice config MACH_ALCHEMY bool "Alchemy processor based machines" +config AR7 + bool "Texas Instruments AR7" + select BOOT_ELF32 + select DMA_NONCOHERENT + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select NO_EXCEPT_FILL + select SWAP_IO_SPACE + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_GPIO + select GCD + select VLYNQ + help + Support for the Texas Instruments AR7 System-on-a-Chip + family: TNETD7100, 7200 and 7300. + config BASLER_EXCITE bool "Basler eXcite smart camera" select CEVT_R4K @@ -209,7 +229,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken + select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help @@ -247,6 +267,7 @@ config MACH_VR41XX select CEVT_R4K select CSRC_R4K select SYS_HAS_CPU_VR41XX + select ARCH_REQUIRE_GPIOLIB config NXP_STB220 bool "NXP STB220 board" @@ -1635,7 +1656,7 @@ config MIPS_APSP_KSPD config MIPS_CMP bool "MIPS CMP framework support" depends on SYS_SUPPORTS_MIPS_CMP - select SYNC_R4K if BROKEN + select SYNC_R4K select SYS_SUPPORTS_SMP select SYS_SUPPORTS_SCHED_SMT if SMP select WEAK_ORDERING @@ -2147,11 +2168,11 @@ menu "Power management options" config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on SYS_SUPPORTS_HOTPLUG_CPU + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP config ARCH_SUSPEND_POSSIBLE def_bool y - depends on SYS_SUPPORTS_HOTPLUG_CPU + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP source "kernel/power/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 807572a6a4d..861da514a46 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -173,6 +173,13 @@ libs-y += arch/mips/fw/lib/ # # +# Texas Instruments AR7 +# +core-$(CONFIG_AR7) += arch/mips/ar7/ +cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 +load-$(CONFIG_AR7) += 0xffffffff94100000 + +# # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile new file mode 100644 index 00000000000..7435e44b396 --- /dev/null +++ b/arch/mips/ar7/Makefile @@ -0,0 +1,10 @@ + +obj-y := \ + prom.o \ + setup.o \ + memory.o \ + irq.o \ + time.o \ + platform.o \ + gpio.o \ + clock.o diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c new file mode 100644 index 00000000000..27dc6663f2f --- /dev/null +++ b/arch/mips/ar7/clock.c @@ -0,0 +1,440 @@ +/* + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gcd.h> +#include <linux/io.h> + +#include <asm/addrspace.h> +#include <asm/mach-ar7/ar7.h> + +#define BOOT_PLL_SOURCE_MASK 0x3 +#define CPU_PLL_SOURCE_SHIFT 16 +#define BUS_PLL_SOURCE_SHIFT 14 +#define USB_PLL_SOURCE_SHIFT 18 +#define DSP_PLL_SOURCE_SHIFT 22 +#define BOOT_PLL_SOURCE_AFE 0 +#define BOOT_PLL_SOURCE_BUS 0 +#define BOOT_PLL_SOURCE_REF 1 +#define BOOT_PLL_SOURCE_XTAL 2 +#define BOOT_PLL_SOURCE_CPU 3 +#define BOOT_PLL_BYPASS 0x00000020 +#define BOOT_PLL_ASYNC_MODE 0x02000000 +#define BOOT_PLL_2TO1_MODE 0x00008000 + +#define TNETD7200_CLOCK_ID_CPU 0 +#define TNETD7200_CLOCK_ID_DSP 1 +#define TNETD7200_CLOCK_ID_USB 2 + +#define TNETD7200_DEF_CPU_CLK 211000000 +#define TNETD7200_DEF_DSP_CLK 125000000 +#define TNETD7200_DEF_USB_CLK 48000000 + +struct tnetd7300_clock { + u32 ctrl; +#define PREDIV_MASK 0x001f0000 +#define PREDIV_SHIFT 16 +#define POSTDIV_MASK 0x0000001f + u32 unused1[3]; + u32 pll; +#define MUL_MASK 0x0000f000 +#define MUL_SHIFT 12 +#define PLL_MODE_MASK 0x00000001 +#define PLL_NDIV 0x00000800 +#define PLL_DIV 0x00000002 +#define PLL_STATUS 0x00000001 + u32 unused2[3]; +}; + +struct tnetd7300_clocks { + struct tnetd7300_clock bus; + struct tnetd7300_clock cpu; + struct tnetd7300_clock usb; + struct tnetd7300_clock dsp; +}; + +struct tnetd7200_clock { + u32 ctrl; + u32 unused1[3]; +#define DIVISOR_ENABLE_MASK 0x00008000 + u32 mul; + u32 prediv; + u32 postdiv; + u32 postdiv2; + u32 unused2[6]; + u32 cmd; + u32 status; + u32 cmden; + u32 padding[15]; +}; + +struct tnetd7200_clocks { + struct tnetd7200_clock cpu; + struct tnetd7200_clock dsp; + struct tnetd7200_clock usb; +}; + +int ar7_cpu_clock = 150000000; +EXPORT_SYMBOL(ar7_cpu_clock); +int ar7_bus_clock = 125000000; +EXPORT_SYMBOL(ar7_bus_clock); +int ar7_dsp_clock; +EXPORT_SYMBOL(ar7_dsp_clock); + +static void approximate(int base, int target, int *prediv, + int *postdiv, int *mul) +{ + int i, j, k, freq, res = target; + for (i = 1; i <= 16; i++) + for (j = 1; j <= 32; j++) + for (k = 1; k <= 32; k++) { + freq = abs(base / j * i / k - target); + if (freq < res) { + res = freq; + *mul = i; + *prediv = j; + *postdiv = k; + } + } +} + +static void calculate(int base, int target, int *prediv, int *postdiv, + int *mul) +{ + int tmp_gcd, tmp_base, tmp_freq; + + for (*prediv = 1; *prediv <= 32; (*prediv)++) { + tmp_base = base / *prediv; + tmp_gcd = gcd(target, tmp_base); + *mul = target / tmp_gcd; + *postdiv = tmp_base / tmp_gcd; + if ((*mul < 1) || (*mul >= 16)) + continue; + if ((*postdiv > 0) & (*postdiv <= 32)) + break; + } + + if (base / *prediv * *mul / *postdiv != target) { + approximate(base, target, prediv, postdiv, mul); + tmp_freq = base / *prediv * *mul / *postdiv; + printk(KERN_WARNING + "Adjusted requested frequency %d to %d\n", + target, tmp_freq); + } + + printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", + *prediv, *postdiv, *mul); +} + +static int tnetd7300_dsp_clock(void) +{ + u32 didr1, didr2; + u8 rev = ar7_chip_rev(); + didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); + didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); + if (didr2 & (1 << 23)) + return 0; + if ((rev >= 0x23) && (rev != 0x57)) + return 250000000; + if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) + > 4208000) + return 250000000; + return 0; +} + +static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int product; + int base_clock = AR7_REF_CLOCK; + u32 ctrl = readl(&clock->ctrl); + u32 pll = readl(&clock->pll); + int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; + int postdiv = (ctrl & POSTDIV_MASK) + 1; + int divisor = prediv * postdiv; + int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + if (*bootcr & BOOT_PLL_BYPASS) + return base_clock / divisor; + + if ((pll & PLL_MODE_MASK) == 0) + return (base_clock >> (mul / 16 + 1)) / divisor; + + if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { + product = (mul & 1) ? + (base_clock * mul) >> 1 : + (base_clock * (mul - 1)) >> 2; + return product / divisor; + } + + if (mul == 16) + return base_clock / divisor; + + return base_clock * mul / divisor; +} + +static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 frequency) +{ + int prediv, postdiv, mul; + int base_clock = ar7_bus_clock; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = ar7_bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + calculate(base_clock, frequency, &prediv, &postdiv, &mul); + + writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); + msleep(1); + writel(4, &clock->pll); + while (readl(&clock->pll) & PLL_STATUS) + ; + writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); + msleep(75); +} + +static void __init tnetd7300_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7300_clocks *clocks = + ioremap_nocache(UR8_REGS_CLOCKS, + sizeof(struct tnetd7300_clocks)); + + ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, + &clocks->bus, bootcr, AR7_AFE_CLOCK); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) + ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, + &clocks->cpu, bootcr, AR7_AFE_CLOCK); + else + ar7_cpu_clock = ar7_bus_clock; + + if (ar7_dsp_clock == 250000000) + tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, + bootcr, ar7_dsp_clock); + + iounmap(clocks); + iounmap(bootcr); +} + +static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int divisor = ((readl(&clock->prediv) & 0x1f) + 1) * + ((readl(&clock->postdiv) & 0x1f) + 1); + + if (*bootcr & BOOT_PLL_BYPASS) + return base / divisor; + + return base * ((readl(&clock->mul) & 0xf) + 1) / divisor; +} + + +static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, + int prediv, int postdiv, int postdiv2, int mul, u32 frequency) +{ + printk(KERN_INFO + "Clocks: base = %d, frequency = %u, prediv = %d, " + "postdiv = %d, postdiv2 = %d, mul = %d\n", + base, frequency, prediv, postdiv, postdiv2, mul); + + writel(0, &clock->ctrl); + writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv); + writel((mul - 1) & 0xF, &clock->mul); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv); + + writel(readl(&clock->cmden) | 1, &clock->cmden); + writel(readl(&clock->cmd) | 1, &clock->cmd); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2); + + writel(readl(&clock->cmden) | 1, &clock->cmden); + writel(readl(&clock->cmd) | 1, &clock->cmd); + + while (readl(&clock->status) & 0x1) + ; /* nop */ + + writel(readl(&clock->ctrl) | 1, &clock->ctrl); +} + +static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) +{ + if (*bootcr & BOOT_PLL_ASYNC_MODE) + /* Async */ + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + else + /* Sync */ + if (*bootcr & BOOT_PLL_2TO1_MODE) + /* 2:1 */ + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + else + /* 1:1 */ + return AR7_REF_CLOCK; +} + + +static void __init tnetd7200_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7200_clocks *clocks = + ioremap_nocache(AR7_REGS_CLOCKS, + sizeof(struct tnetd7200_clocks)); + int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; + int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; + int usb_base, usb_mul, usb_prediv, usb_postdiv; + + cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); + dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) { + printk(KERN_INFO "Clocks: Async mode\n"); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, + &dsp_prediv, &dsp_postdiv, &dsp_mul); + ar7_bus_clock = + ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, + ar7_bus_clock); + + printk(KERN_INFO "Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, + &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = + ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + } else + if (*bootcr & BOOT_PLL_2TO1_MODE) { + printk(KERN_INFO "Clocks: Sync 2:1 mode\n"); + + printk(KERN_INFO "Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, + &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) + / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, + &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ar7_cpu_clock / 2; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, + dsp_mul * 2, ar7_bus_clock); + } else { + printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); + + printk(KERN_INFO "Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, + &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) + / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, + dsp_mul * 2, ar7_bus_clock); + + ar7_cpu_clock = ar7_bus_clock; + } + + printk(KERN_INFO "Clocks: Setting USB clock\n"); + usb_base = ar7_bus_clock; + calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, + &usb_postdiv, &usb_mul); + tnetd7200_set_clock(usb_base, &clocks->usb, + usb_prediv, usb_postdiv, -1, usb_mul, + TNETD7200_DEF_USB_CLK); + + ar7_dsp_clock = ar7_cpu_clock; + + iounmap(clocks); + iounmap(bootcr); +} + +int __init ar7_init_clocks(void) +{ + switch (ar7_chip_id()) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + tnetd7200_init_clocks(); + break; + case AR7_CHIP_7300: + ar7_dsp_clock = tnetd7300_dsp_clock(); + tnetd7300_init_clocks(); + break; + default: + break; + } + + return 0; +} +arch_initcall(ar7_init_clocks); diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c new file mode 100644 index 00000000000..74e14a3dbf4 --- /dev/null +++ b/arch/mips/ar7/gpio.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> + +#include <asm/mach-ar7/gpio.h> + +static const char *ar7_gpio_list[AR7_GPIO_MAX]; + +int gpio_request(unsigned gpio, const char *label) +{ + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + if (ar7_gpio_list[gpio]) + return -EBUSY; + + if (label) + ar7_gpio_list[gpio] = label; + else + ar7_gpio_list[gpio] = "busy"; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + BUG_ON(!ar7_gpio_list[gpio]); + ar7_gpio_list[gpio] = NULL; +} +EXPORT_SYMBOL(gpio_free); diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c new file mode 100644 index 00000000000..c781556c44e --- /dev/null +++ b/arch/mips/ar7/irq.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/mach-ar7/ar7.h> + +#define EXCEPT_OFFSET 0x80 +#define PACE_OFFSET 0xA0 +#define CHNLS_OFFSET 0x200 + +#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10) +#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8) +#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */ +#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */ +#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */ +#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */ +#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */ +#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */ +#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */ +#define PIR_OFFSET (0x40) +#define MSR_OFFSET (0x44) +#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */ +#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */ + +#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr)) + +#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4)) + +static int ar7_irq_base; + +static void ar7_unmask_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(ESR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_mask_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(ECR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_ack_irq(unsigned int irq) +{ + writel(1 << ((irq - ar7_irq_base) % 32), + REG(CR_OFFSET(irq - ar7_irq_base))); +} + +static void ar7_unmask_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET)); +} + +static void ar7_mask_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET)); +} + +static void ar7_ack_sec_irq(unsigned int irq) +{ + writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET)); +} + +static struct irq_chip ar7_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_irq, + .mask = ar7_mask_irq, + .ack = ar7_ack_irq +}; + +static struct irq_chip ar7_sec_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_sec_irq, + .mask = ar7_mask_sec_irq, + .ack = ar7_ack_sec_irq, +}; + +static struct irqaction ar7_cascade_action = { + .handler = no_action, + .name = "AR7 cascade interrupt" +}; + +static void __init ar7_irq_init(int base) +{ + int i; + /* + * Disable interrupts and clear pending + */ + writel(0xffffffff, REG(ECR_OFFSET(0))); + writel(0xff, REG(ECR_OFFSET(32))); + writel(0xffffffff, REG(SEC_ECR_OFFSET)); + writel(0xffffffff, REG(CR_OFFSET(0))); + writel(0xff, REG(CR_OFFSET(32))); + writel(0xffffffff, REG(SEC_CR_OFFSET)); + + ar7_irq_base = base; + + for (i = 0; i < 40; i++) { + writel(i, REG(CHNL_OFFSET(i))); + /* Primary IRQ's */ + set_irq_chip_and_handler(base + i, &ar7_irq_type, + handle_level_irq); + /* Secondary IRQ's */ + if (i < 32) + set_irq_chip_and_handler(base + i + 40, + &ar7_sec_irq_type, + handle_level_irq); + } + + setup_irq(2, &ar7_cascade_action); + setup_irq(ar7_irq_base, &ar7_cascade_action); + set_c0_status(IE_IRQ0); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ar7_irq_init(8); +} + +static void ar7_cascade(void) +{ + u32 status; + int i, irq; + + /* Primary IRQ's */ + irq = readl(REG(PIR_OFFSET)) & 0x3f; + if (irq) { + do_IRQ(ar7_irq_base + irq); + return; + } + + /* Secondary IRQ's are cascaded through primary '0' */ + writel(1, REG(CR_OFFSET(irq))); + status = readl(REG(SEC_SR_OFFSET)); + for (i = 0; i < 32; i++) { + if (status & 1) { + do_IRQ(ar7_irq_base + i + 40); + return; + } + status >>= 1; + } + + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7); + else if (pending & STATUSF_IP2) /* int0 hardware line */ + ar7_cascade(); + else + spurious_interrupt(); +} diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c new file mode 100644 index 00000000000..46fed44825a --- /dev/null +++ b/arch/mips/ar7/memory.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/bootmem.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pfn.h> +#include <linux/proc_fs.h> +#include <linux/string.h> +#include <linux/swap.h> + +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/sections.h> + +#include <asm/mach-ar7/ar7.h> +#include <asm/mips-boards/prom.h> + +static int __init memsize(void) +{ + u32 size = (64 << 20); + u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4); + u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); + u32 *tmpaddr = addr; + + while (tmpaddr > kernel_end) { + *tmpaddr = (u32)tmpaddr; + size >>= 1; + tmpaddr -= size >> 2; + } + + do { + tmpaddr += size >> 2; + if (*tmpaddr != (u32)tmpaddr) + break; + size <<= 1; + } while (size < (64 << 20)); + + writel(tmpaddr, &addr); + + return size; +} + +void __init prom_meminit(void) +{ + unsigned long pages; + + pages = memsize() >> PAGE_SHIFT; + add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, + BOOT_MEM_RAM); +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing to free */ +} diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c new file mode 100644 index 00000000000..54224496178 --- /dev/null +++ b/arch/mips/ar7/platform.c @@ -0,0 +1,555 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/version.h> +#include <linux/vlynq.h> +#include <linux/leds.h> +#include <linux/string.h> +#include <linux/etherdevice.h> + +#include <asm/addrspace.h> +#include <asm/mach-ar7/ar7.h> +#include <asm/mach-ar7/gpio.h> +#include <asm/mach-ar7/prom.h> + +struct plat_vlynq_data { + struct plat_vlynq_ops ops; + int gpio_bit; + int reset_bit; +}; + + +static int vlynq_on(struct vlynq_device *dev) +{ + int result; + struct plat_vlynq_data *pdata = dev->dev.platform_data; + + result = gpio_request(pdata->gpio_bit, "vlynq"); + if (result) + goto out; + + ar7_device_reset(pdata->reset_bit); + + result = ar7_gpio_disable(pdata->gpio_bit); + if (result) + goto out_enabled; + + result = ar7_gpio_enable(pdata->gpio_bit); + if (result) + goto out_enabled; + + result = gpio_direction_output(pdata->gpio_bit, 0); + if (result) + goto out_gpio_enabled; + + msleep(50); + + gpio_set_value(pdata->gpio_bit, 1); + msleep(50); + + return 0; + +out_gpio_enabled: + ar7_gpio_disable(pdata->gpio_bit); +out_enabled: + ar7_device_disable(pdata->reset_bit); + gpio_free(pdata->gpio_bit); +out: + return result; +} + +static void vlynq_off(struct vlynq_device *dev) +{ + struct plat_vlynq_data *pdata = dev->dev.platform_data; + ar7_gpio_disable(pdata->gpio_bit); + gpio_free(pdata->gpio_bit); + ar7_device_disable(pdata->reset_bit); +} + +static struct resource physmap_flash_resource = { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x10000000, + .end = 0x107fffff, +}; + +static struct resource cpmac_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC0, + .end = AR7_REGS_MAC0 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 27, + .end = 27, + }, +}; + +static struct resource cpmac_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC1, + .end = AR7_REGS_MAC1 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 41, + .end = 41, + }, +}; + +static struct resource vlynq_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ0, + .end = AR7_REGS_VLYNQ0 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 29, + .end = 29, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x04000000, + .end = 0x04ffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 80, + .end = 111, + }, +}; + +static struct resource vlynq_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ1, + .end = AR7_REGS_VLYNQ1 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 33, + .end = 33, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x0c000000, + .end = 0x0cffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 112, + .end = 143, + }, +}; + +static struct resource usb_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_USB, + .end = AR7_REGS_USB + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 32, + .end = 32, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x03400000, + .end = 0x034001fff, + }, +}; + +static struct physmap_flash_data physmap_flash_data = { + .width = 2, +}; + +static struct plat_cpmac_data cpmac_low_data = { + .reset_bit = 17, + .power_bit = 20, + .phy_mask = 0x80000000, +}; + +static struct plat_cpmac_data cpmac_high_data = { + .reset_bit = 21, + .power_bit = 22, + .phy_mask = 0x7fffffff, +}; + +static struct plat_vlynq_data vlynq_low_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 20, + .gpio_bit = 18, +}; + +static struct plat_vlynq_data vlynq_high_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 16, + .gpio_bit = 19, +}; + +static struct platform_device physmap_flash = { + .id = 0, + .name = "physmap-flash", + .dev.platform_data = &physmap_flash_data, + .resource = &physmap_flash_resource, + .num_resources = 1, +}; + +static u64 cpmac_dma_mask = DMA_32BIT_MASK; +static struct platform_device cpmac_low = { + .id = 0, + .name = "cpmac", + .dev = { + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &cpmac_low_data, + }, + .resource = cpmac_low_res, + .num_resources = ARRAY_SIZE(cpmac_low_res), +}; + +static struct platform_device cpmac_high = { + .id = 1, + .name = "cpmac", + .dev = { + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &cpmac_high_data, + }, + .resource = cpmac_high_res, + .num_resources = ARRAY_SIZE(cpmac_high_res), +}; + +static struct platform_device vlynq_low = { + .id = 0, + .name = "vlynq", + .dev.platform_data = &vlynq_low_data, + .resource = vlynq_low_res, + .num_resources = ARRAY_SIZE(vlynq_low_res), +}; + +static struct platform_device vlynq_high = { + .id = 1, + .name = "vlynq", + .dev.platform_data = &vlynq_high_data, + .resource = vlynq_high_res, + .num_resources = ARRAY_SIZE(vlynq_high_res), +}; + + +static struct gpio_led default_leds[] = { + { + .name = "status", + .gpio = 8, + .active_low = 1, + }, +}; + +static struct gpio_led dsl502t_leds[] = { + { + .name = "status", + .gpio = 9, + .active_low = 1, + }, + { + .name = "ethernet", + .gpio = 7, + .active_low = 1, + }, + { + .name = "usb", + .gpio = 12, + .active_low = 1, + }, +}; + +static struct gpio_led dg834g_leds[] = { + { + .name = "ppp", + .gpio = 6, + .active_low = 1, + }, + { + .name = "status", + .gpio = 7, + .active_low = 1, + }, + { + .name = "adsl", + .gpio = 8, + .active_low = 1, + }, + { + .name = "wifi", + .gpio = 12, + .active_low = 1, + }, + { + .name = "power", + .gpio = 14, + .active_low = 1, + .default_trigger = "default-on", + }, +}; + +static struct gpio_led fb_sl_leds[] = { + { + .name = "1", + .gpio = 7, + }, + { + .name = "2", + .gpio = 13, + .active_low = 1, + }, + { + .name = "3", + .gpio = 10, + .active_low = 1, + }, + { + .name = "4", + .gpio = 12, + .active_low = 1, + }, + { + .name = "5", + .gpio = 9, + .active_low = 1, + }, +}; + +static struct gpio_led fb_fon_leds[] = { + { + .name = "1", + .gpio = 8, + }, + { + .name = "2", + .gpio = 3, + .active_low = 1, + }, + { + .name = "3", + .gpio = 5, + }, + { + .name = "4", + .gpio = 4, + .active_low = 1, + }, + { + .name = "5", + .gpio = 11, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data ar7_led_data; + +static struct platform_device ar7_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ar7_led_data, + } +}; + +static struct platform_device ar7_udc = { + .id = -1, + .name = "ar7_udc", + .resource = usb_res, + .num_resources = ARRAY_SIZE(usb_res), +}; + +static inline unsigned char char2hex(char h) +{ + switch (h) { + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + return h - '0'; + case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': + return h - 'A' + 10; + case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': + return h - 'a' + 10; + default: + return 0; + } +} + +static void cpmac_get_mac(int instance, unsigned char *dev_addr) +{ + int i; + char name[5], default_mac[ETH_ALEN], *mac; + + mac = NULL; + sprintf(name, "mac%c", 'a' + instance); + mac = prom_getenv(name); + if (!mac) { + sprintf(name, "mac%c", 'a'); + mac = prom_getenv(name); + } + if (!mac) { + random_ether_addr(default_mac); + mac = default_mac; + } + for (i = 0; i < 6; i++) + dev_addr[i] = (char2hex(mac[i * 3]) << 4) + + char2hex(mac[i * 3 + 1]); +} + +static void __init detect_leds(void) +{ + char *prid, *usb_prod; + + /* Default LEDs */ + ar7_led_data.num_leds = ARRAY_SIZE(default_leds); + ar7_led_data.leds = default_leds; + + /* FIXME: the whole thing is unreliable */ + prid = prom_getenv("ProductID"); + usb_prod = prom_getenv("usb_prod"); + + /* If we can't get the product id from PROM, use the default LEDs */ + if (!prid) + return; + + if (strstr(prid, "Fritz_Box_FON")) { + ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds); + ar7_led_data.leds = fb_fon_leds; + } else if (strstr(prid, "Fritz_Box_")) { + ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds); + ar7_led_data.leds = fb_sl_leds; + } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB")) + && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) { + ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds); + ar7_led_data.leds = dsl502t_leds; + } else if (strstr(prid, "DG834")) { + ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); + ar7_led_data.leds = dg834g_leds; + } +} + +static int __init ar7_register_devices(void) +{ + int res; + static struct uart_port uart_port[2]; + + memset(uart_port, 0, sizeof(struct uart_port) * 2); + + uart_port[0].type = PORT_16550A; + uart_port[0].line = 0; + uart_port[0].irq = AR7_IRQ_UART0; + uart_port[0].uartclk = ar7_bus_freq() / 2; + uart_port[0].iotype = UPIO_MEM32; + uart_port[0].mapbase = AR7_REGS_UART0; + uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); + uart_port[0].regshift = 2; + res = early_serial_setup(&uart_port[0]); + if (res) + return res; + + + /* Only TNETD73xx have a second serial port */ + if (ar7_has_second_uart()) { + uart_port[1].type = PORT_16550A; + uart_port[1].line = 1; + uart_port[1].irq = AR7_IRQ_UART1; + uart_port[1].uartclk = ar7_bus_freq() / 2; + uart_port[1].iotype = UPIO_MEM32; + uart_port[1].mapbase = UR8_REGS_UART1; + uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); + uart_port[1].regshift = 2; + res = early_serial_setup(&uart_port[1]); + if (res) + return res; + } + + res = platform_device_register(&physmap_flash); + if (res) + return res; + + ar7_device_disable(vlynq_low_data.reset_bit); + res = platform_device_register(&vlynq_low); + if (res) + return res; + + if (ar7_has_high_vlynq()) { + ar7_device_disable(vlynq_high_data.reset_bit); + res = platform_device_register(&vlynq_high); + if (res) + return res; + } + + if (ar7_has_high_cpmac()) { + cpmac_get_mac(1, cpmac_high_data.dev_addr); + res = platform_device_register(&cpmac_high); + if (res) + return res; + } else { + cpmac_low_data.phy_mask = 0xffffffff; + } + + cpmac_get_mac(0, cpmac_low_data.dev_addr); + res = platform_device_register(&cpmac_low); + if (res) + return res; + + detect_leds(); + res = platform_device_register(&ar7_gpio_leds); + if (res) + return res; + + res = platform_device_register(&ar7_udc); + + return res; +} +arch_initcall(ar7_register_devices); diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c new file mode 100644 index 00000000000..a320bceb2f9 --- /dev/null +++ b/arch/mips/ar7/prom.c @@ -0,0 +1,297 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/serial_reg.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/io.h> +#include <asm/bootinfo.h> + +#include <asm/mach-ar7/ar7.h> +#include <asm/mach-ar7/prom.h> + +#define MAX_ENTRY 80 + +struct env_var { + char *name; + char *value; +}; + +static struct env_var adam2_env[MAX_ENTRY]; + +char *prom_getenv(const char *name) +{ + int i; + for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) + if (!strcmp(name, adam2_env[i].name)) + return adam2_env[i].value; + + return NULL; +} +EXPORT_SYMBOL(prom_getenv); + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +static void __init ar7_init_cmdline(int argc, char *argv[]) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while (actr < argc) { + strcpy(cp, argv[actr]); + cp += strlen(argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) { + /* get rid of trailing space */ + --cp; + *cp = '\0'; + } +} + +struct psbl_rec { + u32 psbl_size; + u32 env_base; + u32 env_size; + u32 ffs_base; + u32 ffs_size; +}; + +static __initdata char psp_env_version[] = "TIENV0.8"; + +struct psp_env_chunk { + u8 num; + u8 ctrl; + u16 csum; + u8 len; + char data[11]; +} __attribute__ ((packed)); + +struct psp_var_map_entry { + u8 num; + char *value; +}; + +static struct psp_var_map_entry psp_var_map[] = { + { 1, "cpufrequency" }, + { 2, "memsize" }, + { 3, "flashsize" }, + { 4, "modetty0" }, + { 5, "modetty1" }, + { 8, "maca" }, + { 9, "macb" }, + { 28, "sysfrequency" }, + { 38, "mipsfrequency" }, +}; + +/* + +Well-known variable (num is looked up in table above for matching variable name) +Example: cpufrequency=211968000 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Name=Value pair in a single chunk +Example: NAME=VALUE ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Name=Value pair in 2 chunks (len is the number of chunks) +Example: bootloaderVersion=1.3.7.15 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- +| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- + +Data is padded with 0xFF + +*/ + +#define PSP_ENV_SIZE 4096 + +static char psp_env_data[PSP_ENV_SIZE] = { 0, }; + +static char * __init lookup_psp_var_map(u8 num) +{ + int i; + + for (i = 0; i < sizeof(psp_var_map); i++) + if (psp_var_map[i].num == num) + return psp_var_map[i].value; + + return NULL; +} + +static void __init add_adam2_var(char *name, char *value) +{ + int i; + for (i = 0; i < MAX_ENTRY; i++) { + if (!adam2_env[i].name) { + adam2_env[i].name = name; + adam2_env[i].value = value; + return; + } else if (!strcmp(adam2_env[i].name, name)) { + adam2_env[i].value = value; + return; + } + } +} + +static int __init parse_psp_env(void *psp_env_base) +{ + int i, n; + char *name, *value; + struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; + + memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); + + i = 1; + n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); + while (i < n) { + if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) + break; + value = chunks[i].data; + if (chunks[i].num) { + name = lookup_psp_var_map(chunks[i].num); + } else { + name = value; + value += strlen(name) + 1; + } + if (name) + add_adam2_var(name, value); + i += chunks[i].len; + } + return 0; +} + +static void __init ar7_init_env(struct env_var *env) +{ + int i; + struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); + void *psp_env = (void *)KSEG1ADDR(psbl->env_base); + + if (strcmp(psp_env, psp_env_version) == 0) { + parse_psp_env(psp_env); + } else { + for (i = 0; i < MAX_ENTRY; i++, env++) + if (env->name) + add_adam2_var(env->name, env->value); + } +} + +static void __init console_config(void) +{ +#ifdef CONFIG_SERIAL_8250_CONSOLE + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s, *p; + + if (strstr(prom_getcmdline(), "console=")) + return; + +#ifdef CONFIG_KGDB + if (!strstr(prom_getcmdline(), "nokgdb")) { + strcat(prom_getcmdline(), " console=kgdb"); + kgdb_enabled = 1; + return; + } +#endif + + s = prom_getenv("modetty0"); + if (s) { + baud = simple_strtoul(s, &p, 10); + s = p; + if (*s == ',') + s++; + if (*s) + parity = *s++; + if (*s == ',') + s++; + if (*s) + bits = *s++; + if (*s == ',') + s++; + if (*s == 'h') + flow = 'r'; + } + + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + + if (flow == 'r') + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, + parity, bits, flow); + else + sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity, + bits); + strcat(prom_getcmdline(), console_string); +#endif +} + +void __init prom_init(void) +{ + ar7_init_cmdline(fw_arg0, (char **)fw_arg1); + ar7_init_env((struct env_var *)fw_arg2); + console_config(); +} + +#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) +static inline unsigned int serial_in(int offset) +{ + return readl((void *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + writel(value, (void *)PORT(offset)); +} + +char prom_getchar(void) +{ + while (!(serial_in(UART_LSR) & UART_LSR_DR)) + ; + return serial_in(UART_RX); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0) + ; + serial_out(UART_TX, c); + return 1; +} + diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c new file mode 100644 index 00000000000..6ebb5f16d96 --- /dev/null +++ b/arch/mips/ar7/setup.c @@ -0,0 +1,94 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/time.h> + +#include <asm/reboot.h> +#include <asm/mach-ar7/ar7.h> +#include <asm/mach-ar7/prom.h> + +static void ar7_machine_restart(char *command) +{ + u32 *softres_reg = ioremap(AR7_REGS_RESET + + AR7_RESET_SOFTWARE, 1); + writel(1, softres_reg); +} + +static void ar7_machine_halt(void) +{ + while (1) + ; +} + +static void ar7_machine_power_off(void) +{ + u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); + u32 power_state = readl(power_reg) | (3 << 30); + writel(power_state, power_reg); + ar7_machine_halt(); +} + +const char *get_system_type(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7300: + return "TI AR7 (TNETD7300)"; + case AR7_CHIP_7100: + return "TI AR7 (TNETD7100)"; + case AR7_CHIP_7200: + return "TI AR7 (TNETD7200)"; + default: + return "TI AR7 (Unknown)"; + } +} + +static int __init ar7_init_console(void) +{ + return 0; +} +console_initcall(ar7_init_console); + +/* + * Initializes basic routines and structures pointers, memory size (as + * given by the bios and saves the command line. + */ + +void __init plat_mem_setup(void) +{ + unsigned long io_base; + + _machine_restart = ar7_machine_restart; + _machine_halt = ar7_machine_halt; + pm_power_off = ar7_machine_power_off; + panic_timeout = 3; + + io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); + if (!io_base) + panic("Can't remap IO base!\n"); + set_io_port_base(io_base); + + prom_meminit(); + + printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n", + get_system_type(), + ar7_chip_id(), ar7_chip_rev()); +} diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c new file mode 100644 index 00000000000..a1fba894daa --- /dev/null +++ b/arch/mips/ar7/time.c @@ -0,0 +1,30 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include <linux/init.h> +#include <linux/time.h> + +#include <asm/time.h> +#include <asm/mach-ar7/ar7.h> + +void __init plat_time_init(void) +{ + mips_hpt_frequency = ar7_cpu_freq() / 2; +} diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 7c0528b0e34..d6903c3f3d5 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PCI) += pci-common.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_PCI) += pcie.o -obj-$(CONFIG_PCI_MSI) += msi.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index 627c162a615..4b92bfc662d 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -29,7 +29,7 @@ #include <dma-coherence.h> #ifdef CONFIG_PCI -#include "pci-common.h" +#include <asm/octeon/pci-octeon.h> #endif #define BAR2_PCI_ADDRESS 0x8000000000ul diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c deleted file mode 100644 index cd029f88da7..00000000000 --- a/arch/mips/cavium-octeon/pci-common.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2007 Cavium Networks - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/delay.h> -#include "pci-common.h" - -typeof(pcibios_map_irq) *octeon_pcibios_map_irq; -enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; - -/** - * Map a PCI device to the appropriate interrupt line - * - * @param dev The Linux PCI device structure for the device to map - * @param slot The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. - * @param pin The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. - * @return Interrupt number for the device - */ -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (octeon_pcibios_map_irq) - return octeon_pcibios_map_irq(dev, slot, pin); - else - panic("octeon_pcibios_map_irq doesn't point to a " - "pcibios_map_irq() function"); -} - - -/** - * Called to perform platform specific PCI setup - * - * @param dev - * @return - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - uint16_t config; - uint32_t dconfig; - int pos; - /* - * Force the Cache line setting to 64 bytes. The standard - * Linux bus scan doesn't seem to set it. Octeon really has - * 128 byte lines, but Intel bridges get really upset if you - * try and set values above 64 bytes. Value is specified in - * 32bit words. - */ - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); - /* Set latency timers for all devices */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); - - /* Enable reporting System errors and parity errors on all devices */ - /* Enable parity checking and error reporting */ - pci_read_config_word(dev, PCI_COMMAND, &config); - config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - pci_write_config_word(dev, PCI_COMMAND, config); - - if (dev->subordinate) { - /* Set latency timers on sub bridges */ - pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); - /* More bridge error detection */ - pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); - config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); - } - - /* Enable the PCIe normal error reporting */ - pos = pci_find_capability(dev, PCI_CAP_ID_EXP); - if (pos) { - /* Update Device Control */ - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); - /* Correctable Error Reporting */ - config |= PCI_EXP_DEVCTL_CERE; - /* Non-Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_NFERE; - /* Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_FERE; - /* Unsupported Request */ - config |= PCI_EXP_DEVCTL_URRE; - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); - } - - /* Find the Advanced Error Reporting capability */ - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); - if (pos) { - /* Clear Uncorrectable Error Status */ - pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, - &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, - dconfig); - /* Enable reporting of all uncorrectable errors */ - /* Uncorrectable Error Mask - turned on bits disable errors */ - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); - /* - * Leave severity at HW default. This only controls if - * errors are reported as uncorrectable or - * correctable, not if the error is reported. - */ - /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ - /* Clear Correctable Error Status */ - pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); - /* Enable reporting of all correctable errors */ - /* Correctable Error Mask - turned on bits disable errors */ - pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); - /* Advanced Error Capabilities */ - pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); - /* ECRC Generation Enable */ - if (config & PCI_ERR_CAP_ECRC_GENC) - config |= PCI_ERR_CAP_ECRC_GENE; - /* ECRC Check Enable */ - if (config & PCI_ERR_CAP_ECRC_CHKC) - config |= PCI_ERR_CAP_ECRC_CHKE; - pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); - /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ - /* Report all errors to the root complex */ - pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, - PCI_ERR_ROOT_CMD_COR_EN | - PCI_ERR_ROOT_CMD_NONFATAL_EN | - PCI_ERR_ROOT_CMD_FATAL_EN); - /* Clear the Root status register */ - pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); - pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); - } - - return 0; -} diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c index 9e143989c7b..4eaec8b46e0 100644 --- a/arch/mips/cobalt/buttons.c +++ b/arch/mips/cobalt/buttons.c @@ -1,7 +1,7 @@ /* * Cobalt buttons platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c index 0720e4fae31..0f1cd90f37e 100644 --- a/arch/mips/cobalt/lcd.c +++ b/arch/mips/cobalt/lcd.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LCD platform device. * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c index 1c6ebd468b0..d3ce6fa1dc7 100644 --- a/arch/mips/cobalt/led.c +++ b/arch/mips/cobalt/led.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LED platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c index 2b088ef3839..691d620b676 100644 --- a/arch/mips/cobalt/mtd.c +++ b/arch/mips/cobalt/mtd.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt MTD device. * - * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c index e70794b8bcb..3ab39898b4e 100644 --- a/arch/mips/cobalt/rtc.c +++ b/arch/mips/cobalt/rtc.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c index 53b8d0d6da9..7cb51f57275 100644 --- a/arch/mips/cobalt/serial.c +++ b/arch/mips/cobalt/serial.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c index 4a570e7145f..0162f9edc69 100644 --- a/arch/mips/cobalt/time.c +++ b/arch/mips/cobalt/time.c @@ -1,7 +1,7 @@ /* * Cobalt time initialization. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig new file mode 100644 index 00000000000..dad5b6769d7 --- /dev/null +++ b/arch/mips/configs/ar7_defconfig @@ -0,0 +1,1182 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Wed Jun 24 14:08:59 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +CONFIG_AR7=y +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_NO_EXCEPT_FILL=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +CONFIG_HZ_100=y +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_KEXEC=y +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_PROBE_INITRD_HEADER=y +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +CONFIG_TCP_CONG_WESTWOOD=y +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DEFAULT_WESTWOOD=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="westwood" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +# CONFIG_NF_CT_ACCT is not set +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=m +# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_SIP is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +CONFIG_ATM=m +# CONFIG_ATM_CLIP is not set +# CONFIG_ATM_LANE is not set +CONFIG_ATM_BR2684=m +CONFIG_ATM_BR2684_IPFILTER=y +CONFIG_STP=y +CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_ATM is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +CONFIG_CPMAC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_RT2X00 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AR7_WDT=y +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_SERIAL=y +CONFIG_SSB_DRIVER_MIPS=y +CONFIG_SSB_EMBEDDED=y +CONFIG_SSB_DRIVER_EXTIF=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_VLYNQ=y +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c index 5ec1c2ffd3a..6f9d0858f59 100644 --- a/arch/mips/gt64120/wrppmc/serial.c +++ b/arch/mips/gt64120/wrppmc/serial.c @@ -1,7 +1,7 @@ /* * Registration of WRPPMC UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h new file mode 100644 index 00000000000..c3dc1a68dd8 --- /dev/null +++ b/arch/mips/include/asm/amon.h @@ -0,0 +1,7 @@ +/* + * Amon support + */ + +int amon_cpu_avail(int); +void amon_cpu_start(int, unsigned long, unsigned long, + unsigned long, unsigned long); diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h index ba1702e8693..3af0b8fb3b8 100644 --- a/arch/mips/include/asm/ds1287.h +++ b/arch/mips/include/asm/ds1287.h @@ -1,7 +1,7 @@ /* * DS1287 timer functions. * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index d58f128aa74..7990694cda2 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); extern int dump_task_regs(struct task_struct *, elf_gregset_t *); extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); +#ifndef ELF_CORE_COPY_REGS #define ELF_CORE_COPY_REGS(elf_regs, regs) \ elf_dump_regs((elf_greg_t *)&(elf_regs), regs); +#endif +#ifndef ELF_CORE_COPY_TASK_REGS #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#endif #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ dump_task_fpu(tsk, elf_fpregs) diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h index d74a8a4ca86..36fd969d64d 100644 --- a/arch/mips/include/asm/gcmpregs.h +++ b/arch/mips/include/asm/gcmpregs.h @@ -114,4 +114,6 @@ #define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */ #define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ +extern int __init gcmp_probe(unsigned long, unsigned long); + #endif /* _ASM_GCMPREGS_H */ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 954807d9d66..10292e37c1f 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -20,7 +20,11 @@ #define GIC_TRIG_EDGE 1 #define GIC_TRIG_LEVEL 0 +#if CONFIG_SMP +#define GIC_NUM_INTRS (24 + NR_CPUS * 2) +#else #define GIC_NUM_INTRS 32 +#endif #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) @@ -483,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr, extern unsigned int gic_get_int(void); extern void gic_send_ipi(unsigned int intr); +extern unsigned int plat_ipi_call_int_xlate(unsigned int); +extern unsigned int plat_ipi_resched_int_xlate(unsigned int); #endif /* _ASM_GICREGS_H */ diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h index f9a7c3ac2e6..250a2407b59 100644 --- a/arch/mips/include/asm/irq_gt641xx.h +++ b/arch/mips/include/asm/irq_gt641xx.h @@ -1,7 +1,7 @@ /* * Galileo/Marvell GT641xx IRQ definitions. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h new file mode 100644 index 00000000000..de71694614d --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_H__ +#define __AR7_H__ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/errno.h> + +#include <asm/addrspace.h> + +#define AR7_SDRAM_BASE 0x14000000 + +#define AR7_REGS_BASE 0x08610000 + +#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) +#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) +/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ +#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) +#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) +#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) +#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) +#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) +#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) +#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) +#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) +#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) +#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) +#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) + +#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) +#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) +#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) + +#define AR7_RESET_PEREPHERIAL 0x0 +#define AR7_RESET_SOFTWARE 0x4 +#define AR7_RESET_STATUS 0x8 + +#define AR7_RESET_BIT_CPMAC_LO 17 +#define AR7_RESET_BIT_CPMAC_HI 21 +#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_EPHY 26 + +/* GPIO control registers */ +#define AR7_GPIO_INPUT 0x0 +#define AR7_GPIO_OUTPUT 0x4 +#define AR7_GPIO_DIR 0x8 +#define AR7_GPIO_ENABLE 0xc + +#define AR7_CHIP_7100 0x18 +#define AR7_CHIP_7200 0x2b +#define AR7_CHIP_7300 0x05 + +/* Interrupts */ +#define AR7_IRQ_UART0 15 +#define AR7_IRQ_UART1 16 + +/* Clocks */ +#define AR7_AFE_CLOCK 35328000 +#define AR7_REF_CLOCK 25000000 +#define AR7_XTAL_CLOCK 24000000 + +struct plat_cpmac_data { + int reset_bit; + int power_bit; + u32 phy_mask; + char dev_addr[6]; +}; + +struct plat_dsl_data { + int reset_bit_dsl; + int reset_bit_sar; +}; + +extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; + +static inline u16 ar7_chip_id(void) +{ + return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; +} + +static inline u8 ar7_chip_rev(void) +{ + return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; +} + +static inline int ar7_cpu_freq(void) +{ + return ar7_cpu_clock; +} + +static inline int ar7_bus_freq(void) +{ + return ar7_bus_clock; +} + +static inline int ar7_vbus_freq(void) +{ + return ar7_bus_clock / 2; +} +#define ar7_cpmac_freq ar7_vbus_freq + +static inline int ar7_dsp_freq(void) +{ + return ar7_dsp_clock; +} + +static inline int ar7_has_high_cpmac(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + return 0; + case AR7_CHIP_7300: + return 1; + default: + return -ENXIO; + } +} +#define ar7_has_high_vlynq ar7_has_high_cpmac +#define ar7_has_second_uart ar7_has_high_cpmac + +static inline void ar7_device_enable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) | (1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_disable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) & ~(1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_reset(u32 bit) +{ + ar7_device_disable(bit); + ar7_device_enable(bit); +} + +static inline void ar7_device_on(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) | (1 << bit), power_reg); + msleep(20); +} + +static inline void ar7_device_off(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) & ~(1 << bit), power_reg); + msleep(20); +} + +#endif /* __AR7_H__ */ diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h new file mode 100644 index 00000000000..cbe9c4f126d --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/gpio.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_GPIO_H__ +#define __AR7_GPIO_H__ + +#include <asm/mach-ar7/ar7.h> + +#define AR7_GPIO_MAX 32 + +extern int gpio_request(unsigned gpio, const char *label); +extern void gpio_free(unsigned gpio); + +/* Common GPIO layer */ +static inline int gpio_get_value(unsigned gpio) +{ + void __iomem *gpio_in = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); + + return readl(gpio_in) & (1 << gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + void __iomem *gpio_out = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); + unsigned tmp; + + tmp = readl(gpio_out) & ~(1 << gpio); + if (value) + tmp |= 1 << gpio; + writel(tmp, gpio_out); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + void __iomem *gpio_dir = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_dir) | (1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + void __iomem *gpio_dir = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + gpio_set_value(gpio, value); + writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +/* Board specific GPIO functions */ +static inline int ar7_gpio_enable(unsigned gpio) +{ + void __iomem *gpio_en = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + writel(readl(gpio_en) | (1 << gpio), gpio_en); + + return 0; +} + +static inline int ar7_gpio_disable(unsigned gpio) +{ + void __iomem *gpio_en = + (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + writel(readl(gpio_en) & ~(1 << gpio), gpio_en); + + return 0; +} + +#include <asm-generic/gpio.h> + +#endif diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h new file mode 100644 index 00000000000..39e9757e3d9 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/irq.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Shamelessly copied from asm-mips/mach-emma2rh/ + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_AR7_IRQ_H +#define __ASM_AR7_IRQ_H + +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif /* __ASM_AR7_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h new file mode 100644 index 00000000000..088f61fe85e --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/prom.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __PROM_H__ +#define __PROM_H__ + +extern char *prom_getenv(const char *name); +extern void prom_meminit(void); + +#endif /* __PROM_H__ */ diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h new file mode 100644 index 00000000000..ac28f273449 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/spaces.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_AR7_SPACES_H +#define _ASM_AR7_SPACES_H + +/* + * This handles the memory map. + * We handle pages at KSEG0 for kernels with 32 bit address space. + */ +#define PAGE_OFFSET 0x94000000UL +#define PHYS_OFFSET 0x14000000UL + +#include <asm/mach-generic/spaces.h> + +#endif /* __ASM_AR7_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h new file mode 100644 index 00000000000..f4862b56308 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_AR7_WAR_H +#define __ASM_MIPS_MACH_AR7_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_AR7_WAR_H */ diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h index 57c8c9ac585..9da9acf5dcb 100644 --- a/arch/mips/include/asm/mach-cobalt/irq.h +++ b/arch/mips/include/asm/mach-cobalt/irq.h @@ -8,7 +8,7 @@ * Copyright (C) 1997 Cobalt Microserver * Copyright (C) 1997, 2003 Ralf Baechle * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv) - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> */ #ifndef _ASM_COBALT_IRQ_H #define _ASM_COBALT_IRQ_H diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h index ae9c5523c7e..f8afec3f294 100644 --- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h +++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/include/asm/octeon/pci-octeon.h index 74ae79991e4..6ac5d3e3398 100644 --- a/arch/mips/cavium-octeon/pci-common.h +++ b/arch/mips/include/asm/octeon/pci-octeon.h @@ -3,23 +3,29 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2005-2007 Cavium Networks + * Copyright (C) 2005-2009 Cavium Networks */ -#ifndef __OCTEON_PCI_COMMON_H__ -#define __OCTEON_PCI_COMMON_H__ + +#ifndef __PCI_OCTEON_H__ +#define __PCI_OCTEON_H__ #include <linux/pci.h> /* Some PCI cards require delays when accessing config space. */ #define PCI_CONFIG_SPACE_DELAY 10000 -/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the - Octeon specific version pointed to by this variable. This function needs to - change for PCI or PCIe based hosts */ -extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq; +/* + * pcibios_map_irq() is defined inside pci-octeon.c. All it does is + * call the Octeon specific version pointed to by this variable. This + * function needs to change for PCI or PCIe based hosts. + */ +extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev, + u8 slot, u8 pin); -/* The following defines are only used when octeon_dma_bar_type = - OCTEON_DMA_BAR_TYPE_BIG */ +/* + * The following defines are used when octeon_dma_bar_type = + * OCTEON_DMA_BAR_TYPE_BIG + */ #define OCTEON_PCI_BAR1_HOLE_BITS 5 #define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3)) @@ -30,9 +36,9 @@ enum octeon_dma_bar_type { OCTEON_DMA_BAR_TYPE_PCIE }; -/** - * This is a variable to tell the DMA mapping system in dma-octeon.c - * how to map PCI DMA addresses. +/* + * This tells the DMA mapping system in dma-octeon.c how to map PCI + * DMA addresses. */ extern enum octeon_dma_bar_type octeon_dma_bar_type; diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index dc0eaa73128..96a14a426a7 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -165,7 +165,14 @@ typedef struct { unsigned long pgprot; } pgprot_t; #ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn); \ + /* avoid <linux/bootmem.h> include hell */ \ + extern unsigned long min_low_pfn; \ + \ + __pfn >= min_low_pfn && __pfn < max_mapnr; \ +}) #elif defined(CONFIG_SPARSEMEM) diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h index 634b55d7e7f..910e71a1246 100644 --- a/arch/mips/include/asm/reg.h +++ b/arch/mips/include/asm/reg.h @@ -69,7 +69,7 @@ #endif -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H) #define EF_R0 0 #define EF_R1 1 diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h index 99993c0d6c1..97c2f81b4b4 100644 --- a/arch/mips/include/asm/swab.h +++ b/arch/mips/include/asm/swab.h @@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) } #define __arch_swab32 __arch_swab32 -#ifdef CONFIG_CPU_MIPS64_R2 +/* + * Having already checked for CONFIG_CPU_MIPSR2, enable the + * optimized version for 64-bit kernel on r2 CPUs. + */ +#ifdef CONFIG_64BIT static inline __attribute_const__ __u64 __arch_swab64(__u64 x) { __asm__( @@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x) return x; } #define __arch_swab64 __arch_swab64 -#endif /* CONFIG_CPU_MIPS64_R2 */ +#endif /* CONFIG_64BIT */ #endif /* CONFIG_CPU_MIPSR2 */ #endif /* _ASM_SWAB_H */ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index 40005010827..b70c49fdda2 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -352,16 +352,18 @@ #define __NR_inotify_init1 (__NR_Linux + 329) #define __NR_preadv (__NR_Linux + 330) #define __NR_pwritev (__NR_Linux + 331) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332) +#define __NR_perf_counter_open (__NR_Linux + 333) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 331 +#define __NR_Linux_syscalls 333 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 331 +#define __NR_O32_Linux_syscalls 333 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -660,16 +662,18 @@ #define __NR_inotify_init1 (__NR_Linux + 288) #define __NR_preadv (__NR_Linux + 289) #define __NR_pwritev (__NR_Linux + 290) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291) +#define __NR_perf_counter_open (__NR_Linux + 292) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 290 +#define __NR_Linux_syscalls 292 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 290 +#define __NR_64_Linux_syscalls 292 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -972,16 +976,18 @@ #define __NR_inotify_init1 (__NR_Linux + 292) #define __NR_preadv (__NR_Linux + 293) #define __NR_pwritev (__NR_Linux + 294) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295) +#define __NR_perf_counter_open (__NR_Linux + 296) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 294 +#define __NR_Linux_syscalls 296 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 294 +#define __NR_N32_Linux_syscalls 296 #ifdef __KERNEL__ diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h index e0ee05a3dfc..fcc6569414f 100644 --- a/arch/mips/include/asm/vr41xx/capcella.h +++ b/arch/mips/include/asm/vr41xx/capcella.h @@ -1,7 +1,7 @@ /* * capcella.h, Include file for ZAO Networks Capcella. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h index 0bcdd3a5c25..6a90bc1d916 100644 --- a/arch/mips/include/asm/vr41xx/giu.h +++ b/arch/mips/include/asm/vr41xx/giu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series General-purpose I/O Unit. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2009 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,7 +41,8 @@ typedef enum { IRQ_SIGNAL_HOLD, } irq_signal_t; -extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal); +extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, + irq_signal_t signal); typedef enum { IRQ_LEVEL_LOW, @@ -51,23 +52,6 @@ typedef enum { extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level); typedef enum { - GPIO_DATA_LOW, - GPIO_DATA_HIGH, - GPIO_DATA_INVAL, -} gpio_data_t; - -extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin); -extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data); - -typedef enum { - GPIO_INPUT, - GPIO_OUTPUT, - GPIO_OUTPUT_DISABLE, -} gpio_direction_t; - -extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir); - -typedef enum { GPIO_PULL_DOWN, GPIO_PULL_UP, GPIO_PULL_DISABLE, diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h index d315dfbc08f..b07f7321751 100644 --- a/arch/mips/include/asm/vr41xx/irq.h +++ b/arch/mips/include/asm/vr41xx/irq.h @@ -7,7 +7,7 @@ * Copyright (C) 2001, 2002 Paul Mundt * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h index 1d67df843dc..130d09d8c8c 100644 --- a/arch/mips/include/asm/vr41xx/mpc30x.h +++ b/arch/mips/include/asm/vr41xx/mpc30x.h @@ -1,7 +1,7 @@ /* * mpc30x.h, Include file for Victor MP-C303/304. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h index 6fc01ce1977..c231a3d6cfd 100644 --- a/arch/mips/include/asm/vr41xx/pci.h +++ b/arch/mips/include/asm/vr41xx/pci.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series PCI Control Unit. * - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h index da9f6e37340..ca806bc4ddc 100644 --- a/arch/mips/include/asm/vr41xx/siu.h +++ b/arch/mips/include/asm/vr41xx/siu.h @@ -1,7 +1,7 @@ /* * Include file for NEC VR4100 series Serial Interface Unit. * - * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h index dc981b4be0a..c78e8243b44 100644 --- a/arch/mips/include/asm/vr41xx/tb0219.h +++ b/arch/mips/include/asm/vr41xx/tb0219.h @@ -1,7 +1,7 @@ /* * tb0219.h, Include file for TANBAC TB0219. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * Modified for TANBAC TB0219: * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h index de527dcfa5f..36f5f798e41 100644 --- a/arch/mips/include/asm/vr41xx/tb0226.h +++ b/arch/mips/include/asm/vr41xx/tb0226.h @@ -1,7 +1,7 @@ /* * tb0226.h, Include file for TANBAC TB0226. * - * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h index 22be64971cc..7b96a43b72b 100644 --- a/arch/mips/include/asm/vr41xx/vr41xx.h +++ b/arch/mips/include/asm/vr41xx/vr41xx.h @@ -7,7 +7,7 @@ * Copyright (C) 2001, 2002 Paul Mundt * Copyright (C) 2002 MontaVista Software, Inc. * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index e1333d7319e..ff448233dab 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) #include <asm/processor.h> + +/* + * When this file is selected, we are definitely running a 64bit kernel. + * So using the right regs define in asm/reg.h + */ +#define WANT_COMPAT_REG_H + +/* These MUST be defined before elf.h gets included */ +extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs); +#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs); +#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \ +({ \ + int __res = 1; \ + elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \ + __res; \ +}) + #include <linux/module.h> #include <linux/elfcore.h> #include <linux/compat.h> @@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) value->tv_usec = rem / NSEC_PER_USEC; } -#undef ELF_CORE_COPY_REGS -#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs); - void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs) { int i; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 1ada45ea070..6996da4d74a 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -1,7 +1,7 @@ /* * DS1287 clockevent driver * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index e9b787feedc..92351e00ae0 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx clockevent routines. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index b551f48d3a0..23da108506b 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -1,7 +1,7 @@ /* * DEC I/O ASIC's counter clocksource * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 39000f103f2..d2072cd3859 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_SET_INTR_MASK(irq, 1); return 0; } @@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq) #endif pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_CLR_INTR_MASK(irq, 1); if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) { if (!gic_wedgeb2bok) @@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_CLR_INTR_MASK(irq, 1); } static void gic_unmask_irq(unsigned int irq) { pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ - GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), - 1 << (irq % 32)); + GIC_SET_INTR_MASK(irq, 1); } #ifdef CONFIG_SMP @@ -254,6 +247,10 @@ static void __init gic_basic_init(void) if (cpu == X) continue; + if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 && + _intrmap[i].ipiflag == 0) + continue; + setup_intr(_intrmap[i].intrnum, _intrmap[i].cpunum, _intrmap[i].pin, diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c index 1b81b131f43..ebcc5f7ad9c 100644 --- a/arch/mips/kernel/irq-gt641xx.c +++ b/arch/mips/kernel/irq-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx IRQ routines. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 0b31b9bda04..20a86e08fd5 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -652,6 +652,8 @@ einval: li v0, -ENOSYS sys sys_inotify_init1 1 sys sys_preadv 6 /* 4330 */ sys sys_pwritev 6 + sys sys_rt_tgsigqueueinfo 4 + sys sys_perf_counter_open 5 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index c647fd6e722..b046130d4c5 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -489,4 +489,6 @@ sys_call_table: PTR sys_inotify_init1 PTR sys_preadv PTR sys_pwritev /* 5390 */ + PTR sys_rt_tgsigqueueinfo + PTR sys_perf_counter_open .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 93cc672f452..15874f9812c 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -415,4 +415,6 @@ EXPORT(sysn32_call_table) PTR sys_inotify_init1 PTR sys_preadv PTR sys_pwritev + PTR compat_sys_rt_tgsigqueueinfo /* 5295 */ + PTR sys_perf_counter_open .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index a5598b2339d..781e0f1e953 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -535,4 +535,6 @@ sys_call_table: PTR sys_inotify_init1 PTR compat_sys_preadv /* 4330 */ PTR compat_sys_pwritev + PTR compat_sys_rt_tgsigqueueinfo + PTR sys_perf_counter_open .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index 653be061b9e..ad0ff5dc4d5 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -37,80 +37,24 @@ #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> #include <asm/mips_mt.h> - -/* - * Crude manipulation of the CPU masks to control which - * which CPU's are brought online during initialisation - * - * Beware... this needs to be called after CPU discovery - * but before CPU bringup - */ -static int __init allowcpus(char *str) -{ - cpumask_t cpu_allow_map; - char buf[256]; - int len; - - cpus_clear(cpu_allow_map); - if (cpulist_parse(str, &cpu_allow_map) == 0) { - cpu_set(0, cpu_allow_map); - cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map); - len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map); - buf[len] = '\0'; - pr_debug("Allowable CPUs: %s\n", buf); - return 1; - } else - return 0; -} -__setup("allowcpus=", allowcpus); +#include <asm/amon.h> +#include <asm/gic.h> static void ipi_call_function(unsigned int cpu) { - unsigned int action = 0; - pr_debug("CPU%d: %s cpu %d status %08x\n", smp_processor_id(), __func__, cpu, read_c0_status()); - switch (cpu) { - case 0: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE0; - break; - case 1: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE1; - break; - case 2: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE2; - break; - case 3: - action = GIC_IPI_EXT_INTR_CALLFNC_VPE3; - break; - } - gic_send_ipi(action); + gic_send_ipi(plat_ipi_call_int_xlate(cpu)); } static void ipi_resched(unsigned int cpu) { - unsigned int action = 0; - pr_debug("CPU%d: %s cpu %d status %08x\n", smp_processor_id(), __func__, cpu, read_c0_status()); - switch (cpu) { - case 0: - action = GIC_IPI_EXT_INTR_RESCHED_VPE0; - break; - case 1: - action = GIC_IPI_EXT_INTR_RESCHED_VPE1; - break; - case 2: - action = GIC_IPI_EXT_INTR_RESCHED_VPE2; - break; - case 3: - action = GIC_IPI_EXT_INTR_RESCHED_VPE3; - break; - } - gic_send_ipi(action); + gic_send_ipi(plat_ipi_resched_int_xlate(cpu)); } /* @@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle) (unsigned long)(gp + sizeof(struct thread_info))); #endif - amon_cpu_start(cpu, pc, sp, gp, a0); + amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0); } /* diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 9021108eb9c..05dd170a83f 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -1,7 +1,7 @@ /* * Count register synchronisation. * - * All CPUs will have their count registers synchronised to the CPU0 expirelo + * All CPUs will have their count registers synchronised to the CPU0 next time * value. This can cause a small timewarp for CPU0. All other CPU's should * not have done anything significant (but they may have had interrupts * enabled briefly - prom_smp_finish() should not be responsible for enabling @@ -13,21 +13,22 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irqflags.h> -#include <linux/r4k-timer.h> +#include <linux/cpumask.h> +#include <asm/r4k-timer.h> #include <asm/atomic.h> #include <asm/barrier.h> -#include <asm/cpumask.h> #include <asm/mipsregs.h> -static atomic_t __initdata count_start_flag = ATOMIC_INIT(0); -static atomic_t __initdata count_count_start = ATOMIC_INIT(0); -static atomic_t __initdata count_count_stop = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0); +static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __init synchronise_count_master(void) +void __cpuinit synchronise_count_master(void) { int i; unsigned long flags; @@ -42,19 +43,20 @@ void __init synchronise_count_master(void) return; #endif - pr_info("Checking COUNT synchronization across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters across %u CPUs: ", + num_online_cpus()); local_irq_save(flags); /* * Notify the slaves that it's time to start */ + atomic_set(&count_reference, read_c0_count()); atomic_set(&count_start_flag, 1); smp_wmb(); - /* Count will be initialised to expirelo for all CPU's */ - initcount = expirelo; + /* Count will be initialised to current timer for all CPU's */ + initcount = read_c0_count(); /* * We loop a few times to get a primed instruction cache, @@ -106,7 +108,7 @@ void __init synchronise_count_master(void) printk("done.\n"); } -void __init synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(void) { int i; unsigned long flags; @@ -131,8 +133,8 @@ void __init synchronise_count_slave(void) while (!atomic_read(&count_start_flag)) mb(); - /* Count will be initialised to expirelo for all CPU's */ - initcount = expirelo; + /* Count will be initialised to next expire for all CPU's */ + initcount = atomic_read(&count_reference); ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { @@ -156,4 +158,3 @@ void __init synchronise_count_slave(void) local_irq_restore(flags); } #undef NR_LOOPS -#endif diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 3ca5f42e819..07b9ec2c6e3 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1387,7 +1387,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr, return len; out_einval: - return -EINVAL;; + return -EINVAL; } static struct device_attribute vpe_class_attributes[] = { diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 475038a141a..27c807b67fe 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -30,6 +30,7 @@ #include <asm/cacheflush.h> #include <asm/traps.h> +#include <asm/gcmpregs.h> #include <asm/mips-boards/prom.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/bonito64.h> @@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops; void __init prom_init(void) { + int result; + prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -358,12 +361,21 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif + /* Early detection of CMP support */ + result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + #ifdef CONFIG_MIPS_CMP - register_smp_ops(&cmp_smp_ops); + if (result) + register_smp_ops(&cmp_smp_ops); #endif #ifdef CONFIG_MIPS_MT_SMP +#ifdef CONFIG_MIPS_CMP + if (!result) + register_smp_ops(&vsmp_smp_ops); +#else register_smp_ops(&vsmp_smp_ops); #endif +#endif #ifdef CONFIG_MIPS_MT_SMTC register_smp_ops(&msmtc_smp_ops); #endif diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index b4eaf137e4a..a8756f82c31 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -331,6 +331,21 @@ static struct irqaction irq_call = { .flags = IRQF_DISABLED|IRQF_PERCPU, .name = "IPI_call" }; + +static int gic_resched_int_base; +static int gic_call_int_base; +#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) +#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) + +unsigned int plat_ipi_call_int_xlate(unsigned int cpu) +{ + return GIC_CALL_INT(cpu); +} + +unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) +{ + return GIC_RESCHED_INT(cpu); +} #endif /* CONFIG_MIPS_MT_SMP */ static struct irqaction i8259irq = { @@ -370,7 +385,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); * Interrupts and CPUs/Core Interrupts. The nature of the External * Interrupts is also defined here - polarity/trigger. */ -static struct gic_intr_map gic_intr_map[] = { +static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { GIC_EXT_INTR(0), X, X, X, X, 0 }, { GIC_EXT_INTR(1), X, X, X, X, 0 }, { GIC_EXT_INTR(2), X, X, X, X, 0 }, @@ -387,21 +402,14 @@ static struct gic_intr_map gic_intr_map[] = { { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, { GIC_EXT_INTR(15), X, X, X, X, 0 }, - { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, +/* This is the end of the general interrupts now we do IPI ones */ }; #endif /* * GCMP needs to be detected before any SMP initialisation */ -static int __init gcmp_probe(unsigned long addr, unsigned long size) +int __init gcmp_probe(unsigned long addr, unsigned long size) { if (gcmp_present >= 0) return gcmp_present; @@ -416,28 +424,36 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size) } #if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) +{ + int intr = baseintr + cpu; + gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr); + gic_intr_map[intr].cpunum = cpu; + gic_intr_map[intr].pin = cpupin; + gic_intr_map[intr].polarity = GIC_POL_POS; + gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; + gic_intr_map[intr].ipiflag = 1; + ipi_map[cpu] |= (1 << (cpupin + 2)); +} + static void __init fill_ipi_map(void) { - int i; + int cpu; - for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { - if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) - ipi_map[gic_intr_map[i].cpunum] |= - (1 << (gic_intr_map[i].pin + 2)); + for (cpu = 0; cpu < NR_CPUS; cpu++) { + fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1); + fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2); } } #endif void __init arch_init_irq(void) { - int gic_present, gcmp_present; - init_i8259_irqs(); if (!cpu_has_veic) mips_cpu_irq_init(); - gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); if (gcmp_present) { GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; gic_present = 1; @@ -514,24 +530,10 @@ void __init arch_init_irq(void) if (gic_present) { /* FIXME */ int i; - struct { - unsigned int resched; - unsigned int call; - } ipiirq[] = { - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 - } - }; + + gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; + gic_resched_int_base = gic_call_int_base - NR_CPUS; + fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { @@ -553,12 +555,15 @@ void __init arch_init_irq(void) printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); - - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); + for (i = 0; i < NR_CPUS; i++) { + setup_irq(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), &irq_call); + set_irq_handler(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), handle_percpu_irq); + set_irq_handler(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), handle_percpu_irq); } } else { /* set up ipi interrupts */ diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c index 42dee4da37b..f48d60e8429 100644 --- a/arch/mips/mti-malta/malta-reset.c +++ b/arch/mips/mti-malta/malta-reset.c @@ -28,9 +28,6 @@ #include <asm/reboot.h> #include <asm/mips-boards/generic.h> -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - static void mips_machine_restart(char *command) { unsigned int __iomem *softres_reg = diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index e8a97f59e06..63d8a297c58 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o + +ifdef CONFIG_PCI_MSI +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o +endif diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c index 1416bca6d1a..1c02f573736 100644 --- a/arch/mips/pci/fixup-capcella.c +++ b/arch/mips/pci/fixup-capcella.c @@ -1,7 +1,7 @@ /* * fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups. * - * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index 59115962572..e08f49cb687 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -1,7 +1,7 @@ /* * fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups. * - * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index ed87733f679..8084b17d440 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -2,7 +2,7 @@ * fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups. * * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c index e3eedf4bf9b..4196ccf3ea3 100644 --- a/arch/mips/pci/fixup-tb0226.c +++ b/arch/mips/pci/fixup-tb0226.c @@ -1,7 +1,7 @@ /* * fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups. * - * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c index 267ab3dc3d4..2fe29db4372 100644 --- a/arch/mips/pci/fixup-tb0287.c +++ b/arch/mips/pci/fixup-tb0287.c @@ -1,7 +1,7 @@ /* * fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c index 964b03b75a8..03742e64765 100644 --- a/arch/mips/cavium-octeon/msi.c +++ b/arch/mips/pci/msi-octeon.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2005-2007 Cavium Networks + * Copyright (C) 2005-2009 Cavium Networks */ #include <linux/kernel.h> #include <linux/init.h> @@ -16,8 +16,7 @@ #include <asm/octeon/cvmx-pci-defs.h> #include <asm/octeon/cvmx-npei-defs.h> #include <asm/octeon/cvmx-pexp-defs.h> - -#include "pci-common.h" +#include <asm/octeon/pci-octeon.h> /* * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is @@ -47,8 +46,8 @@ static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); * programming the MSI control bits [6:4] before calling * pci_enable_msi(). * - * @param dev Device requesting MSI interrupts - * @param desc MSI descriptor + * @dev: Device requesting MSI interrupts + * @desc: MSI descriptor * * Returns 0 on success. */ @@ -213,14 +212,9 @@ void arch_teardown_msi_irq(unsigned int irq) } -/** +/* * Called by the interrupt handling code when an MSI interrupt * occurs. - * - * @param cpl - * @param dev_id - * - * @return */ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) { @@ -256,31 +250,37 @@ static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id) } -/** +/* * Initializes the MSI interrupt handling code - * - * @return */ int octeon_msi_initialize(void) { - int r; if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { - r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, IRQF_SHARED, - "MSI[0:63]", octeon_msi_interrupt); + "MSI[0:63]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); } else if (octeon_is_pci_host()) { - r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, + if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt, IRQF_SHARED, - "MSI[0:15]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[16:31]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[32:47]", octeon_msi_interrupt); - r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, - IRQF_SHARED, - "MSI[48:63]", octeon_msi_interrupt); + "MSI[0:15]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[16:31]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[32:47]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); + + if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt, + IRQF_SHARED, + "MSI[48:63]", octeon_msi_interrupt)) + panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); + } return 0; } diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c index 900c6b32576..28962a7c660 100644 --- a/arch/mips/pci/ops-vr41xx.c +++ b/arch/mips/pci/ops-vr41xx.c @@ -2,8 +2,8 @@ * ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series. * * Copyright (C) 2001-2003 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,7 +21,7 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. */ #include <linux/pci.h> diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c index 67c0ff5e92f..9cb0c807f56 100644 --- a/arch/mips/cavium-octeon/pci.c +++ b/arch/mips/pci/pci-octeon.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2005-2007 Cavium Networks + * Copyright (C) 2005-2009 Cavium Networks */ #include <linux/kernel.h> #include <linux/init.h> @@ -17,8 +17,7 @@ #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-npi-defs.h> #include <asm/octeon/cvmx-pci-defs.h> - -#include "pci-common.h" +#include <asm/octeon/pci-octeon.h> #define USE_OCTEON_INTERNAL_ARBITER @@ -54,6 +53,126 @@ union octeon_pci_address { } s; }; +int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev, + u8 slot, u8 pin); +enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; + +/** + * Map a PCI device to the appropriate interrupt line + * + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. + * @pin: The PCI interrupt pin read from the device, then swizzled + * as it goes through each bridge. + * Returns Interrupt number for the device + */ +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (octeon_pcibios_map_irq) + return octeon_pcibios_map_irq(dev, slot, pin); + else + panic("octeon_pcibios_map_irq not set."); +} + + +/* + * Called to perform platform specific PCI setup + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + uint16_t config; + uint32_t dconfig; + int pos; + /* + * Force the Cache line setting to 64 bytes. The standard + * Linux bus scan doesn't seem to set it. Octeon really has + * 128 byte lines, but Intel bridges get really upset if you + * try and set values above 64 bytes. Value is specified in + * 32bit words. + */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4); + /* Set latency timers for all devices */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48); + + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48); + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, + dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (config & PCI_ERR_CAP_ECRC_GENC) + config |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (config & PCI_ERR_CAP_ECRC_CHKC) + config |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Report all errors to the root complex */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + + return 0; +} + /** * Return the mapping of PCI device number to IRQ line. Each * character in the return string represents the interrupt @@ -136,9 +255,8 @@ int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, } -/** +/* * Read a value from configuration space - * */ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) @@ -174,15 +292,8 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn, } -/** +/* * Write a value to PCI configuration space - * - * @bus: - * @devfn: - * @reg: - * @size: - * @val: - * Returns */ static int octeon_write_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) @@ -251,10 +362,8 @@ static struct pci_controller octeon_pci_controller = { }; -/** +/* * Low level initialize the Octeon PCI controller - * - * Returns */ static void octeon_pci_initialize(void) { @@ -398,7 +507,7 @@ static void octeon_pci_initialize(void) pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */ cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64); } -#endif /* USE_OCTEON_INTERNAL_ARBITER */ +#endif /* USE_OCTEON_INTERNAL_ARBITER */ /* * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, @@ -457,10 +566,8 @@ static void octeon_pci_initialize(void) } -/** +/* * Initialize the Octeon PCI controller - * - * Returns */ static int __init octeon_pci_setup(void) { diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index d1e049b55f3..56525711f8b 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -2,8 +2,8 @@ * pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2003 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org> * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -22,7 +22,7 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. */ #include <linux/init.h> diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h index 8a35e32b837..6b1ae2eb1c0 100644 --- a/arch/mips/pci/pci-vr41xx.h +++ b/arch/mips/pci/pci-vr41xx.h @@ -2,8 +2,8 @@ * pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series. * * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c index 49d14081b3b..75262247f3e 100644 --- a/arch/mips/cavium-octeon/pcie.c +++ b/arch/mips/pci/pcie-octeon.c @@ -18,8 +18,7 @@ #include <asm/octeon/cvmx-pescx-defs.h> #include <asm/octeon/cvmx-pexp-defs.h> #include <asm/octeon/cvmx-helper-errata.h> - -#include "pci-common.h" +#include <asm/octeon/pci-octeon.h> union cvmx_pcie_address { uint64_t u64; @@ -976,13 +975,13 @@ static int cvmx_pcie_rc_initialize(int pcie_port) /** * Map a PCI device to the appropriate interrupt line * - * @param dev The Linux PCI device structure for the device to map - * @param slot The slot number for this device on __BUS 0__. Linux + * @dev: The Linux PCI device structure for the device to map + * @slot: The slot number for this device on __BUS 0__. Linux * enumerates through all the bridges and figures out the * slot on Bus 0 where this device eventually hooks to. - * @param pin The PCI interrupt pin read from the device, then swizzled + * @pin: The PCI interrupt pin read from the device, then swizzled * as it goes through each bridge. - * @return Interrupt number for the device + * Returns Interrupt number for the device */ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) @@ -1025,12 +1024,12 @@ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, /** * Read a value from configuration space * - * @param bus - * @param devfn - * @param reg - * @param size - * @param val - * @return + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns */ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus, unsigned int devfn, int reg, int size, @@ -1156,12 +1155,12 @@ static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, /** * Write a value to PCI configuration space * - * @param bus - * @param devfn - * @param reg - * @param size - * @param val - * @return + * @bus: + * @devfn: + * @reg: + * @size: + * @val: + * Returns */ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus, unsigned int devfn, int reg, @@ -1254,7 +1253,7 @@ static struct pci_controller octeon_pcie1_controller = { /** * Initialize the Octeon PCIe controllers * - * @return + * Returns */ static int __init octeon_pcie_setup(void) { diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c index 6d9bab89058..719f4a5b984 100644 --- a/arch/mips/vr41xx/casio-e55/setup.c +++ b/arch/mips/vr41xx/casio-e55/setup.c @@ -1,7 +1,7 @@ /* * setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65. * - * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c index d77c330a0d5..6346c59c9f9 100644 --- a/arch/mips/vr41xx/common/bcu.c +++ b/arch/mips/vr41xx/common/bcu.c @@ -2,8 +2,8 @@ * bcu.c, Bus Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> - * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Yoichi Yuasa <yuasa@linux-mips.org> * - Added support for NEC VR4133. */ #include <linux/kernel.h> diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c index ad0e8e3409d..8ba7d04a5ec 100644 --- a/arch/mips/vr41xx/common/cmu.c +++ b/arch/mips/vr41xx/common/cmu.c @@ -2,8 +2,8 @@ * cmu.c, Clock Mask Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copuright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copuright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Yoichi Yuasa <yuasa@linux-mips.org> * - Added support for NEC VR4133. */ #include <linux/init.h> diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c index 2b272f1496f..22cc6f2100a 100644 --- a/arch/mips/vr41xx/common/giu.c +++ b/arch/mips/vr41xx/common/giu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series GIU platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 3f23d9fda66..6d39e222b17 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -2,8 +2,8 @@ * icu.c, Interrupt Control Unit routines for the NEC VR4100 series. * * Copyright (C) 2001-2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +21,11 @@ */ /* * Changes: - * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com> + * MontaVista Software Inc. <source@mvista.com> * - New creation, NEC VR4122 and VR4131 are supported. * - Added support for NEC VR4111 and VR4121. * - * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Yoichi Yuasa <yuasa@linux-mips.org> * - Coped with INTASSIGN of NEC VR4133. */ #include <linux/errno.h> diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index c64995342ba..1386e6f081c 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -1,7 +1,7 @@ /* * init.c, Common initialization routines for NEC VR4100 series. * - * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 9cc389109b1..bef06872f01 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -1,7 +1,7 @@ /* * Interrupt handing routines for NEC VR4100 series. * - * Copyright (C) 2005-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005-2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 028aaf75eb2..692b4e85b7f 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -1,7 +1,7 @@ /* * pmu.c, Power Management Unit routines for NEC VR4100 series. * - * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c index 9f26c14edca..ebc5dcf0ed8 100644 --- a/arch/mips/vr41xx/common/rtc.c +++ b/arch/mips/vr41xx/common/rtc.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c index 654dee6208b..54eae56108f 100644 --- a/arch/mips/vr41xx/common/siu.c +++ b/arch/mips/vr41xx/common/siu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series SIU platform device. * - * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c index e0c1ac5e988..ff841422b63 100644 --- a/arch/mips/vr41xx/common/type.c +++ b/arch/mips/vr41xx/common/type.c @@ -1,7 +1,7 @@ /* * type.c, System type for NEC VR4100 series. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c index 9eef297eca1..3982f378a3e 100644 --- a/arch/mips/vr41xx/ibm-workpad/setup.c +++ b/arch/mips/vr41xx/ibm-workpad/setup.c @@ -1,7 +1,7 @@ /* * setup.c, Setup for the IBM WorkPad z50. * - * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index e58b9a46e1b..35d2ed6396f 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -70,10 +70,6 @@ struct pci_dev; */ #define PCI_DMA_BUS_IS_PHYS (1) - -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (0) - /* Return the index of the PCI controller for device. */ static inline int pci_controller_num(struct pci_dev *dev) { diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index fef5b434dad..fad68616af3 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -346,10 +346,12 @@ #define __NR_inotify_init1 333 #define __NR_preadv 334 #define __NR_pwritev 335 +#define __NR_rt_tgsigqueueinfo 336 +#define __NR_perf_counter_open 337 #ifdef __KERNEL__ -#define NR_syscalls 326 +#define NR_syscalls 338 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 7408a27199f..e0d2563af4f 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -722,6 +722,8 @@ ENTRY(sys_call_table) .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 335 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 681ad8c9e4f..0dfdc500112 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -136,8 +136,7 @@ void show_trace(unsigned long *sp) unsigned long *stack, addr, module_start, module_end; int i; - printk(KERN_EMERG "\n" - KERN_EMERG "Call Trace:"); + printk(KERN_EMERG "\nCall Trace:"); stack = sp; i = 0; @@ -153,7 +152,7 @@ void show_trace(unsigned long *sp) printk("\n"); #else if ((i % 6) == 0) - printk("\n" KERN_EMERG " "); + printk(KERN_EMERG " "); printk("[<%08lx>] ", addr); i++; #endif @@ -180,7 +179,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) if (((long) stack & (THREAD_SIZE - 1)) == 0) break; if ((i % 8) == 0) - printk("\n" KERN_EMERG " "); + printk(KERN_EMERG " "); printk("%08lx ", *stack++); } @@ -264,8 +263,7 @@ void show_registers(struct pt_regs *regs) show_stack(current, (unsigned long *) sp); #if 0 - printk(KERN_EMERG "\n" - KERN_EMERG "Code: "); + printk(KERN_EMERG "\nCode: "); if (regs->pc < PAGE_OFFSET) goto bad; @@ -311,16 +309,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code) { console_verbose(); spin_lock_irq(&die_lock); - printk(KERN_EMERG "\n" - KERN_EMERG "%s: %04x\n", + printk(KERN_EMERG "\n%s: %04x\n", str, code & 0xffff); show_registers(regs); if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 && (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) { printk(KERN_EMERG "Exception in usermode interrupt handler\n"); - printk(KERN_EMERG "\n" - KERN_EMERG " Please connect to kernel debugger !!\n"); + printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n"); asm volatile ("0: bra 0b"); } @@ -429,9 +425,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs) { console_verbose(); - printk(KERN_EMERG "\n" - KERN_EMERG "Asynchronous I/O Bus Error\n" - KERN_EMERG "==========================\n"); + printk(KERN_EMERG "Asynchronous I/O Bus Error\n"); + printk(KERN_EMERG "==========================\n"); if (bcberr & BCBERR_BEME) printk(KERN_EMERG "- Multiple recorded errors\n"); diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index bcebcefb4ad..c96ba3da95a 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -61,7 +61,7 @@ SECTIONS _edata = .; /* End of data section */ } - .data.init_task : { INIT_TASK(THREAD_SIZE); } + .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); } /* might get freed after init */ . = ALIGN(PAGE_SIZE); diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 9038f39d9d7..06f8d5b5b0f 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -16,6 +16,8 @@ config PARISC select RTC_DRV_GENERIC select INIT_ALL_POSSIBLE select BUG + select HAVE_PERF_COUNTERS + select GENERIC_ATOMIC64 if !64BIT help The PA-RISC microprocessor is designed by Hewlett-Packard and used in many of their workstations & servers (HP9000 700 and 800 series, diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 7eeaff94436..8bc9e96699b 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v)))) -#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v)))) +#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v)))) +#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v)))) #define atomic_inc(v) ((void)(__atomic_add_return( 1,(v)))) #define atomic_dec(v) ((void)(__atomic_add_return( -1,(v)))) -#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v))) -#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v))) +#define atomic_add_return(i,v) (__atomic_add_return( (i),(v))) +#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v))) #define atomic_inc_return(v) (__atomic_add_return( 1,(v))) #define atomic_dec_return(v) (__atomic_add_return( -1,(v))) @@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) -#endif /* CONFIG_64BIT */ +#else /* CONFIG_64BIT */ + +#include <asm-generic/atomic64.h> + +#endif /* !CONFIG_64BIT */ #include <asm-generic/atomic-long.h> diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h index 31ad0f05af3..f7a18f96870 100644 --- a/arch/parisc/include/asm/dma.h +++ b/arch/parisc/include/asm/dma.h @@ -1,5 +1,4 @@ -/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. +/* asm/dma.h: Defines for using and allocating dma channels. * Written by Hennus Bergman, 1992. * High DMA channel support & info by Hannu Savolainen * and John Boyd, Nov. 1992. diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h new file mode 100644 index 00000000000..dc9e829f701 --- /dev/null +++ b/arch/parisc/include/asm/perf_counter.h @@ -0,0 +1,7 @@ +#ifndef __ASM_PARISC_PERF_COUNTER_H +#define __ASM_PARISC_PERF_COUNTER_H + +/* parisc only supports software counters through this interface. */ +static inline void set_perf_counter_pending(void) { } + +#endif /* __ASM_PARISC_PERF_COUNTER_H */ diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index 9d64df8754b..9ce66e9d1c2 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -18,6 +18,7 @@ #include <asm/types.h> #include <asm/system.h> #include <asm/percpu.h> + #endif /* __ASSEMBLY__ */ #define KERNEL_STACK_SIZE (4*PAGE_SIZE) @@ -127,6 +128,8 @@ struct thread_struct { unsigned long flags; }; +#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs)) + /* Thread struct flags. */ #define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */ #define PARISC_UAC_SIGBUS (1UL << 1) diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h index ee80c920b46..d91357bca5b 100644 --- a/arch/parisc/include/asm/system.h +++ b/arch/parisc/include/asm/system.h @@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val) /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ #define __ldcw(a) ({ \ unsigned __ret; \ - __asm__ __volatile__(__LDCW " 0(%1),%0" \ - : "=r" (__ret) : "r" (a)); \ + __asm__ __volatile__(__LDCW " 0(%2),%0" \ + : "=r" (__ret), "+m" (*(a)) : "r" (a)); \ __ret; \ }) diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h index 1f6fd4fc05b..8f1a8100bf2 100644 --- a/arch/parisc/include/asm/tlbflush.h +++ b/arch/parisc/include/asm/tlbflush.h @@ -12,14 +12,12 @@ * N class systems, only one PxTLB inter processor broadcast can be * active at any one time on the Merced bus. This tlb purge * synchronisation is fairly lightweight and harmless so we activate - * it on all SMP systems not just the N class. We also need to have - * preemption disabled on uniprocessor machines, and spin_lock does that - * nicely. + * it on all systems not just the N class. */ extern spinlock_t pa_tlb_lock; -#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) -#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) +#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags) +#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags) extern void flush_tlb_all(void); extern void flush_tlb_all_local(void *); @@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) { + unsigned long flags; + /* For one page, it's not worth testing the split_tlb variable */ mb(); mtsp(vma->vm_mm->context,1); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb(addr); pitlb(addr); - purge_tlb_end(); + purge_tlb_end(flags); } void __flush_tlb_range(unsigned long sid, diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index ef26b009dc5..f3d3b8b012c 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -807,8 +807,12 @@ #define __NR_dup3 (__NR_Linux + 312) #define __NR_pipe2 (__NR_Linux + 313) #define __NR_inotify_init1 (__NR_Linux + 314) +#define __NR_preadv (__NR_Linux + 315) +#define __NR_pwritev (__NR_Linux + 316) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) +#define __NR_perf_counter_open (__NR_Linux + 318) -#define __NR_Linux_syscalls (__NR_inotify_init1 + 1) +#define __NR_Linux_syscalls (__NR_perf_counter_open + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 837530ea32e..b6ed34de14e 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -1,5 +1,4 @@ -/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -398,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm); void clear_user_page_asm(void *page, unsigned long vaddr) { + unsigned long flags; /* This function is implemented in assembly in pacache.S */ extern void __clear_user_page_asm(void *page, unsigned long vaddr); - purge_tlb_start(); + purge_tlb_start(flags); __clear_user_page_asm(page, vaddr); - purge_tlb_end(); + purge_tlb_end(flags); } #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */ @@ -444,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { + unsigned long flags; + purge_kernel_dcache_page((unsigned long)page); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(page); - purge_tlb_end(); + purge_tlb_end(flags); clear_user_page_asm(page, vaddr); } EXPORT_SYMBOL(clear_user_page); void flush_kernel_dcache_page_addr(void *addr) { + unsigned long flags; + flush_kernel_dcache_page_asm(addr); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(addr); - purge_tlb_end(); + purge_tlb_end(flags); } EXPORT_SYMBOL(flush_kernel_dcache_page_addr); @@ -490,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start, if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */ flush_tlb_all(); else { + unsigned long flags; + mtsp(sid, 1); - purge_tlb_start(); + purge_tlb_start(flags); if (split_tlb) { while (npages--) { pdtlb(start); @@ -504,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start, start += PAGE_SIZE; } } - purge_tlb_end(); + purge_tlb_end(flags); } } diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c index bd1f7f1ff74..d228d823787 100644 --- a/arch/parisc/kernel/inventory.c +++ b/arch/parisc/kernel/inventory.c @@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void) static int __init pat_query_module(ulong pcell_loc, ulong mod_index) { - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; unsigned long bytecnt; unsigned long temp; /* 64-bit scratch value */ long status; /* PDC return value status */ struct parisc_device *dev; + pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL); + if (!pa_pdc_cell) + panic("couldn't allocate memory for PDC_PAT_CELL!"); + /* return cell module (PA or Processor view) */ status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, - PA_VIEW, &pa_pdc_cell); + PA_VIEW, pa_pdc_cell); if (status != PDC_OK) { /* no more cell modules or error */ return status; } - temp = pa_pdc_cell.cba; - dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path); + temp = pa_pdc_cell->cba; + dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path)); if (!dev) { return PDC_OK; } @@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index) /* save generic info returned from the call */ /* REVISIT: who is the consumer of this? not sure yet... */ - dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */ - dev->pmod_loc = pa_pdc_cell.mod_location; + dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */ + dev->pmod_loc = pa_pdc_cell->mod_location; register_parisc_device(dev); /* advertise device */ @@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index) case PAT_ENTITY_PROC: printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n", - pa_pdc_cell.mod[0]); + pa_pdc_cell->mod[0]); break; case PAT_ENTITY_MEM: printk(KERN_DEBUG "PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n", - pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], - pa_pdc_cell.mod[2]); + pa_pdc_cell->mod[0], pa_pdc_cell->mod[1], + pa_pdc_cell->mod[2]); break; case PAT_ENTITY_CA: printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc); @@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index) print_ranges: pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, IO_VIEW, &io_pdc_cell); - printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]); - for (i = 0; i < pa_pdc_cell.mod[1]; i++) { + printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]); + for (i = 0; i < pa_pdc_cell->mod[1]; i++) { printk(KERN_DEBUG " PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", - i, pa_pdc_cell.mod[2 + i * 3], /* type */ - pa_pdc_cell.mod[3 + i * 3], /* start */ - pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + i, pa_pdc_cell->mod[2 + i * 3], /* type */ + pa_pdc_cell->mod[3 + i * 3], /* start */ + pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */ printk(KERN_DEBUG " IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", - i, io_pdc_cell.mod[2 + i * 3], /* type */ - io_pdc_cell.mod[3 + i * 3], /* start */ - io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + i, io_pdc_cell->mod[2 + i * 3], /* type */ + io_pdc_cell->mod[3 + i * 3], /* start */ + io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */ } printk(KERN_DEBUG "\n"); break; } #endif /* DEBUG_PAT */ + + kfree(pa_pdc_cell); + return PDC_OK; } diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 8007f1e6572..330f536a932 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - cpumask_setall(&irq_desc[irq].affinity); + cpumask_setall(irq_desc[irq].affinity); return -EINVAL; } @@ -138,13 +138,13 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_dest < 0) return -1; - cpumask_copy(&irq_desc[irq].affinity, dest); + cpumask_copy(irq_desc[irq].affinity, dest); return 0; } #endif -static struct hw_interrupt_type cpu_interrupt_type = { +static struct irq_chip cpu_interrupt_type = { .typename = "CPU", .startup = cpu_startup_irq, .shutdown = cpu_disable_irq, @@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu)); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, &irq_desc[irq].affinity); + cpumask_copy(&dest, irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 7d927eac932..c07f618ff7d 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte, if (end > PMD_SIZE) end = PMD_SIZE; do { + unsigned long flags; + if (!pte_none(*pte)) printk(KERN_ERR "map_pte_uncached: page already exists\n"); set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC)); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(orig_vaddr); - purge_tlb_end(); + purge_tlb_end(flags); vaddr += PAGE_SIZE; orig_vaddr += PAGE_SIZE; (*paddr_ptr) += PAGE_SIZE; @@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr, if (end > PMD_SIZE) end = PMD_SIZE; do { + unsigned long flags; pte_t page = *pte; + pte_clear(&init_mm, vaddr, pte); - purge_tlb_start(); + purge_tlb_start(flags); pdtlb_kernel(orig_vaddr); - purge_tlb_end(); + purge_tlb_end(flags); vaddr += PAGE_SIZE; orig_vaddr += PAGE_SIZE; pte++; diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 6936386c986..f7064abc3bb 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -1,5 +1,4 @@ -/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 61c07078c07..1f3aa8db020 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -156,7 +156,7 @@ void machine_power_off(void) * software. The user has to press the button himself. */ printk(KERN_EMERG "System shut down completed.\n" - KERN_EMERG "Please power this system off now."); + "Please power this system off now."); } void (*pm_power_off)(void) = machine_power_off; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index e09d0f7fb6b..c8fb61ed32f 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -1,5 +1,4 @@ -/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $ - * +/* * Initial setup-routines for HP 9000 based hardware. * * Copyright (C) 1991, 1992, 1995 Linus Torvalds @@ -121,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev) if (is_pdc_pat()) { ulong status; unsigned long bytecnt; - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; #undef USE_PAT_CPUID #ifdef USE_PAT_CPUID struct pdc_pat_cpu_num cpu_info; #endif + pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL); + if (!pa_pdc_cell) + panic("couldn't allocate memory for PDC_PAT_CELL!"); + status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc, - dev->mod_index, PA_VIEW, &pa_pdc_cell); + dev->mod_index, PA_VIEW, pa_pdc_cell); BUG_ON(PDC_OK != status); /* verify it's the same as what do_pat_inventory() found */ - BUG_ON(dev->mod_info != pa_pdc_cell.mod_info); - BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location); + BUG_ON(dev->mod_info != pa_pdc_cell->mod_info); + BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location); + + txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */ - txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */ + kfree(pa_pdc_cell); #ifdef USE_PAT_CPUID /* We need contiguous numbers for cpuid. Firmware's notion diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 82131ca8e05..cb71f3dac99 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $ - * +/* * Initial setup-routines for HP 9000 based hardware. * * Copyright (C) 1991, 1992, 1995 Linus Torvalds diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 1adb40c8166..92a0acaa0d1 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid, return ret; } -/*** copied from mips64 ***/ -/* - * Ooo, nasty. We need here to frob 32-bit unsigned longs to - * 64-bit unsigned longs. - */ - -static inline int -get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) -{ - n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); - if (ufdset) { - unsigned long odd; - - if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32))) - return -EFAULT; - - odd = n & 1UL; - n &= ~1UL; - while (n) { - unsigned long h, l; - __get_user(l, ufdset); - __get_user(h, ufdset+1); - ufdset += 2; - *fdset++ = h << 32 | l; - n -= 2; - } - if (odd) - __get_user(*fdset, ufdset); - } else { - /* Tricky, must clear full unsigned long in the - * kernel fdset at the end, this makes sure that - * actually happens. - */ - memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32)); - } - return 0; -} - -static inline void -set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) -{ - unsigned long odd; - n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); - - if (!ufdset) - return; - - odd = n & 1UL; - n &= ~1UL; - while (n) { - unsigned long h, l; - l = *fdset++; - h = l >> 32; - __put_user(l, ufdset); - __put_user(h, ufdset+1); - ufdset += 2; - n -= 2; - } - if (odd) - __put_user(*fdset, ufdset); -} - struct msgbuf32 { int mtype; char mtext[1]; diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 03b9a01bc16..cf145eb026b 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -413,6 +413,10 @@ ENTRY_SAME(dup3) ENTRY_SAME(pipe2) ENTRY_SAME(inotify_init1) + ENTRY_COMP(preadv) /* 315 */ + ENTRY_COMP(pwritev) + ENTRY_COMP(rt_tgsigqueueinfo) + ENTRY_SAME(perf_counter_open) /* Nothing yet */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index d4dd05674c6..a79c6f9e7e2 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly; /* timer cycles per tick */ */ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) { - unsigned long now; + unsigned long now, now2; unsigned long next_tick; - unsigned long cycles_elapsed, ticks_elapsed; + unsigned long cycles_elapsed, ticks_elapsed = 1; unsigned long cycles_remainder; unsigned int cpu = smp_processor_id(); struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu); @@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) /* Initialize next_tick to the expected tick time. */ next_tick = cpuinfo->it_value; - /* Get current interval timer. - * CR16 reads as 64 bits in CPU wide mode. - * CR16 reads as 32 bits in CPU narrow mode. - */ + /* Get current cycle counter (Control Register 16). */ now = mfctl(16); cycles_elapsed = now - next_tick; - if ((cycles_elapsed >> 5) < cpt) { + if ((cycles_elapsed >> 6) < cpt) { /* use "cheap" math (add/subtract) instead * of the more expensive div/mul method */ cycles_remainder = cycles_elapsed; - ticks_elapsed = 1; while (cycles_remainder > cpt) { cycles_remainder -= cpt; ticks_elapsed++; } } else { + /* TODO: Reduce this to one fdiv op */ cycles_remainder = cycles_elapsed % cpt; - ticks_elapsed = 1 + cycles_elapsed / cpt; - } - - /* Can we differentiate between "early CR16" (aka Scenario 1) and - * "long delay" (aka Scenario 3)? I don't think so. - * - * We expected timer_interrupt to be delivered at least a few hundred - * cycles after the IT fires. But it's arbitrary how much time passes - * before we call it "late". I've picked one second. - */ - if (unlikely(ticks_elapsed > HZ)) { - /* Scenario 3: very long delay? bad in any case */ - printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" - " cycles %lX rem %lX " - " next/now %lX/%lX\n", - cpu, - cycles_elapsed, cycles_remainder, - next_tick, now ); + ticks_elapsed += cycles_elapsed / cpt; } /* convert from "division remainder" to "remainder of clock tick" */ @@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) cpuinfo->it_value = next_tick; - /* Skip one clocktick on purpose if we are likely to miss next_tick. - * We want to avoid the new next_tick being less than CR16. - * If that happened, itimer wouldn't fire until CR16 wrapped. - * We'll catch the tick we missed on the tick after that. + /* Program the IT when to deliver the next interrupt. + * Only bottom 32-bits of next_tick are writable in CR16! */ - if (!(cycles_remainder >> 13)) - next_tick += cpt; - - /* Program the IT when to deliver the next interrupt. */ - /* Only bottom 32-bits of next_tick are written to cr16. */ mtctl(next_tick, 16); + /* Skip one clocktick on purpose if we missed next_tick. + * The new CR16 must be "later" than current CR16 otherwise + * itimer would not fire until CR16 wrapped - e.g 4 seconds + * later on a 1Ghz processor. We'll account for the missed + * tick on the next timer interrupt. + * + * "next_tick - now" will always give the difference regardless + * if one or the other wrapped. If "now" is "bigger" we'll end up + * with a very large unsigned number. + */ + now2 = mfctl(16); + if (next_tick - now2 > cpt) + mtctl(next_tick+cpt, 16); + +#if 1 +/* + * GGG: DEBUG code for how many cycles programming CR16 used. + */ + if (unlikely(now2 - now > 0x3000)) /* 12K cycles */ + printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!" + " cyc %lX rem %lX " + " next/now %lX/%lX\n", + cpu, now2 - now, cycles_elapsed, cycles_remainder, + next_tick, now ); +#endif + + /* Can we differentiate between "early CR16" (aka Scenario 1) and + * "long delay" (aka Scenario 3)? I don't think so. + * + * Timer_interrupt will be delivered at least a few hundred cycles + * after the IT fires. But it's arbitrary how much time passes + * before we call it "late". I've picked one second. + * + * It's important NO printk's are between reading CR16 and + * setting up the next value. May introduce huge variance. + */ + if (unlikely(ticks_elapsed > HZ)) { + /* Scenario 3: very long delay? bad in any case */ + printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" + " cycles %lX rem %lX " + " next/now %lX/%lX\n", + cpu, + cycles_elapsed, cycles_remainder, + next_tick, now ); + } /* Done mucking with unreliable delivery of interrupts. * Go do system house keeping. @@ -173,7 +191,7 @@ EXPORT_SYMBOL(profile_pc); /* clock source code */ -static cycle_t read_cr16(void) +static cycle_t read_cr16(struct clocksource *cs) { return get_cycles(); } diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index c32f5d6d778..528f0ff9b27 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err) oops_enter(); /* Amuse the user in a SPARC fashion */ - if (err) printk( -KERN_CRIT " _______________________________ \n" -KERN_CRIT " < Your System ate a SPARC! Gah! >\n" -KERN_CRIT " ------------------------------- \n" -KERN_CRIT " \\ ^__^\n" -KERN_CRIT " \\ (xx)\\_______\n" -KERN_CRIT " (__)\\ )\\/\\\n" -KERN_CRIT " U ||----w |\n" -KERN_CRIT " || ||\n"); + if (err) printk(KERN_CRIT + " _______________________________ \n" + " < Your System ate a SPARC! Gah! >\n" + " ------------------------------- \n" + " \\ ^__^\n" + " (__)\\ )\\/\\\n" + " U ||----w |\n" + " || ||\n"); /* unlock the pdc lock if necessary */ pdc_emergency_unlock(); @@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs) else printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ", code); - printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm); + printk(KERN_CONT "pid=%d command='%s'\n", + task_pid_nr(current), current->comm); show_regs(regs); #endif si.si_signo = SIGSEGV; diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c index 462696d30d3..ae66d31f9ec 100644 --- a/arch/parisc/lib/checksum.c +++ b/arch/parisc/lib/checksum.c @@ -13,8 +13,6 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * - * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $ */ #include <linux/module.h> #include <linux/types.h> diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index bbda909c866..abf41f4632a 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -405,7 +405,7 @@ byte_copy: unaligned_copy: /* possibly we are aligned on a word, but not on a double... */ - if (likely(t1 & (sizeof(unsigned int)-1)) == 0) { + if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) { t2 = src & (sizeof(unsigned int) - 1); if (unlikely(t2 != 0)) { diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c index 66c8a9f6a27..3ca1c614921 100644 --- a/arch/parisc/math-emu/decode_exc.c +++ b/arch/parisc/math-emu/decode_exc.c @@ -40,7 +40,7 @@ * END_DESC */ - +#include <linux/kernel.h> #include "float.h" #include "sgl_float.h" #include "dbl_float.h" diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index bfb6dd6ab38..c6afbfc9577 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -1,5 +1,4 @@ -/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $ - * +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 4356ceb1e36..b0831d9e35c 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -370,34 +370,22 @@ static void __init setup_bootmem(void) void free_initmem(void) { - unsigned long addr, init_begin, init_end; - - printk(KERN_INFO "Freeing unused kernel memory: "); + unsigned long addr; + unsigned long init_begin = (unsigned long)__init_begin; + unsigned long init_end = (unsigned long)__init_end; #ifdef CONFIG_DEBUG_KERNEL /* Attempt to catch anyone trying to execute code here * by filling the page with BRK insns. - * - * If we disable interrupts for all CPUs, then IPI stops working. - * Kinda breaks the global cache flushing. */ - local_irq_disable(); - - memset(__init_begin, 0x00, - (unsigned long)__init_end - (unsigned long)__init_begin); - - flush_data_cache(); - asm volatile("sync" : : ); - flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end); - asm volatile("sync" : : ); - - local_irq_enable(); + memset((void *)init_begin, 0x00, init_end - init_begin); + flush_icache_range(init_begin, init_end); #endif /* align __init_begin and __init_end to page size, ignoring linker script where we might have tried to save RAM */ - init_begin = PAGE_ALIGN((unsigned long)(__init_begin)); - init_end = PAGE_ALIGN((unsigned long)(__init_end)); + init_begin = PAGE_ALIGN(init_begin); + init_end = PAGE_ALIGN(init_end); for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); @@ -409,7 +397,8 @@ void free_initmem(void) /* set up a new led state on systems shipped LED State panel */ pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE); - printk("%luk freed\n", (init_end - init_begin) >> 10); + printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n", + (init_end - init_begin) >> 10); } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bf6cedfa05d..d00131ca083 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT config TRACE_IRQFLAGS_SUPPORT bool - depends on PPC64 default y config LOCKDEP_SUPPORT diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 2f50acd11a6..3d80c3e9cf6 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -36,3 +36,13 @@ zImage.pseries zconf.h zlib.h zutil.h +fdt.c +fdt.h +fdt_ro.c +fdt_rw.c +fdt_strerror.c +fdt_sw.c +fdt_wip.c +libfdt.h +libfdt_internal.h + diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts index 26549fca2ed..49ac36b16dd 100644 --- a/arch/powerpc/boot/dts/amigaone.dts +++ b/arch/powerpc/boot/dts/amigaone.dts @@ -70,8 +70,8 @@ devsel-speed = <0x00000001>; min-grant = <0>; max-latency = <0>; - /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ - ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>; + /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; interrupt-parent = <&i8259>; #interrupt-cells = <2>; #address-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index a8dcb018c4a..a680165292f 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -253,6 +253,7 @@ /* Filled in by U-Boot */ clock-frequency = <0>; status = "disabled"; + sdhci,1-bit-only; }; crypto@30000 { diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 01bfb56bbe8..31605ee4afb 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -261,10 +261,11 @@ compatible = "gpio-leds"; green { gpios = <&GPIO1 0 0>; - default-state = "on"; + default-state = "keep"; }; red { gpios = <&GPIO1 1 0>; + default-state = "keep"; }; }; diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 3b77f092abe..787635f23d8 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Fri Jan 23 07:57:16 2009 +# Linux kernel version: 2.6.30 +# Tue Jun 9 23:35:36 2009 # # CONFIG_PPC64 is not set @@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y @@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,10 +125,13 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,10 +186,11 @@ CONFIG_WARP=y # CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set # CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set # CONFIG_YOSEMITE is not set # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set # CONFIG_PPC44x_SIMPLE is not set -# CONFIG_PPC4xx_GPIO is not set +CONFIG_PPC4xx_GPIO=y CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_STDBINUTILS=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # CONFIG_HAS_RAPIDIO is not set # @@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_XILINX_SYSACE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SCSI_WAIT_SCAN is not set # # SCSI Transports @@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_IBM_NEW_EMAC=y CONFIG_IBM_NEW_EMAC_RXB=128 CONFIG_IBM_NEW_EMAC_TXB=64 @@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set @@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set +CONFIG_MMC_PIKASD=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_GPIO_PLATFORM is not set +CONFIG_LEDS_GPIO_OF=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers # -# CONFIG_LEDS_TRIGGERS is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -993,6 +1078,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1130,16 +1227,19 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 @@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set -CONFIG_BDI_SWITCH=y +# CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PPC4XX is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index 2ff798744c1..7685ffde882 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -598,8 +598,6 @@ typedef struct risc_timer_pram { #define CICR_IEN ((uint)0x00000080) /* Int. enable */ #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -#define IMAP_ADDR (get_immrbase()) - #define CPM_PIN_INPUT 0 #define CPM_PIN_OUTPUT 1 #define CPM_PIN_PRIMARY 0 diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h index 1e2eb41fa05..52e4d54da2a 100644 --- a/arch/powerpc/include/asm/delay.h +++ b/arch/powerpc/include/asm/delay.h @@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs); udelay(delay); \ else \ cpu_relax(); \ + if (!__ret) \ + __ret = (condition); \ __ret; \ }) diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 3d9e887c3c0..b44aaabdd1a 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0, + + if (dma_ops->sync_single_range_for_cpu) + dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0, size, direction); } @@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_device(dev, dma_handle, + + if (dma_ops->sync_single_range_for_device) + dma_ops->sync_single_range_for_device(dev, dma_handle, 0, size, direction); } @@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction); + + if (dma_ops->sync_sg_for_cpu) + dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction); } static inline void dma_sync_sg_for_device(struct device *dev, @@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_sg_for_device(dev, sgl, nents, direction); + + if (dma_ops->sync_sg_for_device) + dma_ops->sync_sg_for_device(dev, sgl, nents, direction); } static inline void dma_sync_single_range_for_cpu(struct device *dev, @@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_cpu(dev, dma_handle, + + if (dma_ops->sync_single_range_for_cpu) + dma_ops->sync_single_range_for_cpu(dev, dma_handle, offset, size, direction); } @@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev, struct dma_mapping_ops *dma_ops = get_dma_ops(dev); BUG_ON(!dma_ops); - dma_ops->sync_single_range_for_device(dev, dma_handle, offset, + + if (dma_ops->sync_single_range_for_device) + dma_ops->sync_single_range_for_device(dev, dma_handle, offset, size, direction); } #else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */ diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h index 684a73f4324..a74c4ee6c02 100644 --- a/arch/powerpc/include/asm/highmem.h +++ b/arch/powerpc/include/asm/highmem.h @@ -22,9 +22,7 @@ #ifdef __KERNEL__ -#include <linux/init.h> #include <linux/interrupt.h> -#include <linux/highmem.h> #include <asm/kmap_types.h> #include <asm/tlbflush.h> #include <asm/page.h> @@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); +extern void *kmap_atomic_prot(struct page *page, enum km_type type, + pgprot_t prot); +extern void kunmap_atomic(void *kvaddr, enum km_type type); static inline void *kmap(struct page *page) { @@ -79,62 +80,11 @@ static inline void kunmap(struct page *page) kunmap_high(page); } -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) -{ - unsigned int idx; - unsigned long vaddr; - - /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - - debug_kmap_atomic(type); - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(*(kmap_pte-idx))); -#endif - __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1); - local_flush_tlb_page(NULL, vaddr); - - return (void*) vaddr; -} - static inline void *kmap_atomic(struct page *page, enum km_type type) { return kmap_atomic_prot(page, type, kmap_prot); } -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ -#ifdef CONFIG_DEBUG_HIGHMEM - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); - - if (vaddr < __fix_to_virt(FIX_KMAP_END)) { - pagefault_enable(); - return; - } - - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(&init_mm, vaddr, kmap_pte-idx); - local_flush_tlb_page(NULL, vaddr); -#endif - pagefault_enable(); -} - static inline struct page *kmap_atomic_to_page(void *ptr) { unsigned long idx, vaddr = (unsigned long) ptr; @@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr) return pte_page(*pte); } + #define flush_cache_kmaps() flush_cache_all() #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 867ab8ed69b..8b505eaaa38 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags) #if defined(CONFIG_BOOKE) #define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") +#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") #else #define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) mtmsr(flags) +#define raw_local_irq_restore(flags) mtmsr(flags) #endif -static inline void local_irq_disable(void) +static inline void raw_local_irq_disable(void) { #ifdef CONFIG_BOOKE __asm__ __volatile__("wrteei 0": : :"memory"); @@ -86,7 +86,7 @@ static inline void local_irq_disable(void) #endif } -static inline void local_irq_enable(void) +static inline void raw_local_irq_enable(void) { #ifdef CONFIG_BOOKE __asm__ __volatile__("wrteei 1": : :"memory"); @@ -98,7 +98,7 @@ static inline void local_irq_enable(void) #endif } -static inline void local_irq_save_ptr(unsigned long *flags) +static inline void raw_local_irq_save_ptr(unsigned long *flags) { unsigned long msr; msr = mfmsr(); @@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags) #endif } -#define local_save_flags(flags) ((flags) = mfmsr()) -#define local_irq_save(flags) local_irq_save_ptr(&flags) -#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) +#define raw_local_save_flags(flags) ((flags) = mfmsr()) +#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags) +#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0) +#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0) -#define hard_irq_enable() local_irq_enable() -#define hard_irq_disable() local_irq_disable() +#define hard_irq_disable() raw_local_irq_disable() static inline int irqs_disabled_flags(unsigned long flags) { diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h index 8ccd4e15576..0ea0639fcf7 100644 --- a/arch/powerpc/include/asm/perf_counter.h +++ b/arch/powerpc/include/asm/perf_counter.h @@ -61,6 +61,8 @@ struct pt_regs; extern unsigned long perf_misc_flags(struct pt_regs *regs); extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +#define PERF_COUNTER_INDEX_OFFSET 1 + /* * Only override the default definitions in include/linux/perf_counter.h * if we have hardware PMU support. diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index e05d26fa372..82b72207c51 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -47,7 +47,8 @@ * generic accessors and iterators here */ #define __real_pte(e,p) ((real_pte_t) { \ - (e), pte_val(*((p) + PTRS_PER_PTE)) }) + (e), ((e) & _PAGE_COMBO) ? \ + (pte_val(*((p) + PTRS_PER_PTE))) : 0 }) #define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \ (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) #define __rpte_to_pte(r) ((r).pte) diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 01c12339b30..168fce72620 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -58,7 +58,7 @@ struct rtas_t { unsigned long entry; /* physical address pointer */ unsigned long base; /* physical address pointer */ unsigned long size; - spinlock_t lock; + raw_spinlock_t lock; struct rtas_args args; struct device_node *dev; /* virtual address pointer */ }; @@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg) (devfn << 8) | (reg & 0xff); } +extern void __cpuinit rtas_give_timebase(void); +extern void __cpuinit rtas_take_timebase(void); + #endif /* __KERNEL__ */ #endif /* _POWERPC_RTAS_H */ diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4dd38f12915..3cadba60a4b 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -191,11 +191,49 @@ transfer_to_handler_cont: mflr r9 lwz r11,0(r9) /* virtual address of handler */ lwz r9,4(r9) /* where to go when done */ +#ifdef CONFIG_TRACE_IRQFLAGS + lis r12,reenable_mmu@h + ori r12,r12,reenable_mmu@l + mtspr SPRN_SRR0,r12 + mtspr SPRN_SRR1,r10 + SYNC + RFI +reenable_mmu: /* re-enable mmu so we can */ + mfmsr r10 + lwz r12,_MSR(r1) + xor r10,r10,r12 + andi. r10,r10,MSR_EE /* Did EE change? */ + beq 1f + + /* Save handler and return address into the 2 unused words + * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything + * else can be recovered from the pt_regs except r3 which for + * normal interrupts has been set to pt_regs and for syscalls + * is an argument, so we temporarily use ORIG_GPR3 to save it + */ + stw r9,8(r1) + stw r11,12(r1) + stw r3,ORIG_GPR3(r1) + bl trace_hardirqs_off + lwz r0,GPR0(r1) + lwz r3,ORIG_GPR3(r1) + lwz r4,GPR4(r1) + lwz r5,GPR5(r1) + lwz r6,GPR6(r1) + lwz r7,GPR7(r1) + lwz r8,GPR8(r1) + lwz r9,8(r1) + lwz r11,12(r1) +1: mtctr r11 + mtlr r9 + bctr /* jump to handler */ +#else /* CONFIG_TRACE_IRQFLAGS */ mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r10 mtlr r9 SYNC RFI /* jump to handler, enable MMU */ +#endif /* CONFIG_TRACE_IRQFLAGS */ #if defined (CONFIG_6xx) || defined(CONFIG_E500) 4: rlwinm r12,r12,0,~_TLF_NAPPING @@ -251,6 +289,31 @@ _GLOBAL(DoSyscall) #ifdef SHOW_SYSCALLS bl do_show_syscall #endif /* SHOW_SYSCALLS */ +#ifdef CONFIG_TRACE_IRQFLAGS + /* Return from syscalls can (and generally will) hard enable + * interrupts. You aren't supposed to call a syscall with + * interrupts disabled in the first place. However, to ensure + * that we get it right vs. lockdep if it happens, we force + * that hard enable here with appropriate tracing if we see + * that we have been called with interrupts off + */ + mfmsr r11 + andi. r12,r11,MSR_EE + bne+ 1f + /* We came in with interrupts disabled, we enable them now */ + bl trace_hardirqs_on + mfmsr r11 + lwz r0,GPR0(r1) + lwz r3,GPR3(r1) + lwz r4,GPR4(r1) + ori r11,r11,MSR_EE + lwz r5,GPR5(r1) + lwz r6,GPR6(r1) + lwz r7,GPR7(r1) + lwz r8,GPR8(r1) + mtmsr r11 +1: +#endif /* CONFIG_TRACE_IRQFLAGS */ rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ lwz r11,TI_FLAGS(r10) andi. r11,r11,_TIF_SYSCALL_T_OR_A @@ -275,6 +338,7 @@ ret_from_syscall: rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ /* disable interrupts so current_thread_info()->flags can't change */ LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + /* Note: We don't bother telling lockdep about it */ SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) @@ -288,6 +352,19 @@ ret_from_syscall: oris r11,r11,0x1000 /* Set SO bit in CR */ stw r11,_CCR(r1) syscall_exit_cont: + lwz r8,_MSR(r1) +#ifdef CONFIG_TRACE_IRQFLAGS + /* If we are going to return from the syscall with interrupts + * off, we trace that here. It shouldn't happen though but we + * want to catch the bugger if it does right ? + */ + andi. r10,r8,MSR_EE + bne+ 1f + stw r3,GPR3(r1) + bl trace_hardirqs_off + lwz r3,GPR3(r1) +1: +#endif /* CONFIG_TRACE_IRQFLAGS */ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ @@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) mtlr r4 mtcr r5 lwz r7,_NIP(r1) - lwz r8,_MSR(r1) FIX_SRR1(r8, r0) lwz r2,GPR2(r1) lwz r1,GPR1(r1) @@ -394,7 +470,9 @@ syscall_exit_work: andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) beq ret_from_except - /* Re-enable interrupts */ + /* Re-enable interrupts. There is no need to trace that with + * lockdep as we are supposed to have IRQs on at this point + */ ori r10,r10,MSR_EE SYNC MTMSRD(r10) @@ -705,6 +783,7 @@ ret_from_except: /* Hard-disable interrupts so that current_thread_info()->flags * can't change between when we test it and when we return * from the interrupt. */ + /* Note: We don't bother telling lockdep about it */ LOAD_MSR_KERNEL(r10,MSR_KERNEL) SYNC /* Some chip revs have problems here... */ MTMSRD(r10) /* disable interrupts */ @@ -744,11 +823,24 @@ resume_kernel: beq+ restore andi. r0,r3,MSR_EE /* interrupts off? */ beq restore /* don't schedule if so */ +#ifdef CONFIG_TRACE_IRQFLAGS + /* Lockdep thinks irqs are enabled, we need to call + * preempt_schedule_irq with IRQs off, so we inform lockdep + * now that we -did- turn them off already + */ + bl trace_hardirqs_off +#endif 1: bl preempt_schedule_irq rlwinm r9,r1,0,0,(31-THREAD_SHIFT) lwz r3,TI_FLAGS(r9) andi. r0,r3,_TIF_NEED_RESCHED bne- 1b +#ifdef CONFIG_TRACE_IRQFLAGS + /* And now, to properly rebalance the above, we tell lockdep they + * are being turned back on, which will happen when we return + */ + bl trace_hardirqs_on +#endif #else resume_kernel: #endif /* CONFIG_PREEMPT */ @@ -765,6 +857,28 @@ restore: stw r6,icache_44x_need_flush@l(r4) 1: #endif /* CONFIG_44x */ + + lwz r9,_MSR(r1) +#ifdef CONFIG_TRACE_IRQFLAGS + /* Lockdep doesn't know about the fact that IRQs are temporarily turned + * off in this assembly code while peeking at TI_FLAGS() and such. However + * we need to inform it if the exception turned interrupts off, and we + * are about to trun them back on. + * + * The problem here sadly is that we don't know whether the exceptions was + * one that turned interrupts off or not. So we always tell lockdep about + * turning them on here when we go back to wherever we came from with EE + * on, even if that may meen some redudant calls being tracked. Maybe later + * we could encode what the exception did somewhere or test the exception + * type in the pt_regs but that sounds overkill + */ + andi. r10,r9,MSR_EE + beq 1f + bl trace_hardirqs_on + lwz r9,_MSR(r1) +1: +#endif /* CONFIG_TRACE_IRQFLAGS */ + lwz r0,GPR0(r1) lwz r2,GPR2(r1) REST_4GPRS(3, r1) @@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) - lwz r9,_MSR(r1) andi. r10,r9,MSR_RI /* check if this exception occurred */ beql nonrecoverable /* at a bad place (MSR:RI = 0) */ @@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) MTMSRD(r10) /* clear the RI bit */ .globl exc_exit_restart exc_exit_restart: - lwz r9,_MSR(r1) lwz r12,_NIP(r1) FIX_SRR1(r9,r10) mtspr SPRN_SRR0,r12 @@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL here */ beq do_user_signal do_resched: /* r10 contains MSR_KERNEL here */ + /* Note: We don't need to inform lockdep that we are enabling + * interrupts here. As far as it knows, they are already enabled + */ ori r10,r10,MSR_EE SYNC MTMSRD(r10) /* hard-enable interrupts */ bl schedule recheck: + /* Note: And we don't tell it we are disabling them again + * neither. Those disable/enable cycles used to peek at + * TI_FLAGS aren't advertised. + */ LOAD_MSR_KERNEL(r10,MSR_KERNEL) SYNC MTMSRD(r10) /* disable interrupts */ diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 48469463f89..fc213294275 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -1124,9 +1124,8 @@ mmu_off: RFI /* - * Use the first pair of BAT registers to map the 1st 16MB - * of RAM to PAGE_OFFSET. From this point on we can't safely - * call OF any more. + * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET + * (we keep one for debugging) and on others, we use one 256M BAT. */ initial_bats: lis r11,PAGE_OFFSET@h @@ -1136,12 +1135,16 @@ initial_bats: bne 4f ori r11,r11,4 /* set up BAT registers for 601 */ li r8,0x7f /* valid, block length = 8MB */ - oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */ - oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */ mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */ mtspr SPRN_IBAT0L,r8 /* lower BAT register */ - mtspr SPRN_IBAT1U,r9 - mtspr SPRN_IBAT1L,r10 + addis r11,r11,0x800000@h + addis r8,r8,0x800000@h + mtspr SPRN_IBAT1U,r11 + mtspr SPRN_IBAT1L,r8 + addis r11,r11,0x800000@h + addis r8,r8,0x800000@h + mtspr SPRN_IBAT2U,r11 + mtspr SPRN_IBAT2L,r8 isync blr diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index 75ff47fed7b..c244133c67a 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -10,7 +10,6 @@ */ #include <linux/string.h> #include <linux/perf_counter.h> -#include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index fa983a59c4c..a359cb08e90 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np, dev->dev.archdata.of_node = np; if (bus_id) - dev_set_name(&dev->dev, bus_id); + dev_set_name(&dev->dev, "%s", bus_id); else of_device_make_bus_id(dev); diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 6637c87fe70..833097ac45d 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -10,7 +10,6 @@ */ #include <linux/string.h> #include <linux/perf_counter.h> -#include <linux/string.h> #include <asm/reg.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 3e7135bbe40..892a9f2e6d7 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs) for (i = 0; i < 32; i++) { if ((i % REGS_PER_LINE) == 0) - printk("\n" KERN_INFO "GPR%02d: ", i); + printk("\nGPR%02d: ", i); printk(REG " ", regs->gpr[i]); if (i == LAST_VOLATILE && !FULL_REGS(regs)) break; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index ee4c7609b64..c434823b8c8 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -38,9 +38,10 @@ #include <asm/syscalls.h> #include <asm/smp.h> #include <asm/atomic.h> +#include <asm/time.h> struct rtas_t rtas = { - .lock = SPIN_LOCK_UNLOCKED + .lock = __RAW_SPIN_LOCK_UNLOCKED }; EXPORT_SYMBOL(rtas); @@ -67,6 +68,28 @@ unsigned long rtas_rmo_buf; void (*rtas_flash_term_hook)(int); EXPORT_SYMBOL(rtas_flash_term_hook); +/* RTAS use home made raw locking instead of spin_lock_irqsave + * because those can be called from within really nasty contexts + * such as having the timebase stopped which would lockup with + * normal locks and spinlock debugging enabled + */ +static unsigned long lock_rtas(void) +{ + unsigned long flags; + + local_irq_save(flags); + preempt_disable(); + __raw_spin_lock_flags(&rtas.lock, flags); + return flags; +} + +static void unlock_rtas(unsigned long flags) +{ + __raw_spin_unlock(&rtas.lock); + local_irq_restore(flags); + preempt_enable(); +} + /* * call_rtas_display_status and call_rtas_display_status_delay * are designed only for very early low-level debugging, which @@ -79,7 +102,7 @@ static void call_rtas_display_status(char c) if (!rtas.base) return; - spin_lock_irqsave(&rtas.lock, s); + s = lock_rtas(); args->token = 10; args->nargs = 1; @@ -89,7 +112,7 @@ static void call_rtas_display_status(char c) enter_rtas(__pa(args)); - spin_unlock_irqrestore(&rtas.lock, s); + unlock_rtas(s); } static void call_rtas_display_status_delay(char c) @@ -411,8 +434,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE) return -1; - /* Gotta do something different here, use global lock for now... */ - spin_lock_irqsave(&rtas.lock, s); + s = lock_rtas(); rtas_args = &rtas.args; rtas_args->token = token; @@ -439,8 +461,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...) outputs[i] = rtas_args->rets[i+1]; ret = (nret > 0)? rtas_args->rets[0]: 0; - /* Gotta do something different here, use global lock for now... */ - spin_unlock_irqrestore(&rtas.lock, s); + unlock_rtas(s); if (buff_copy) { log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0); @@ -837,7 +858,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) buff_copy = get_errorlog_buffer(); - spin_lock_irqsave(&rtas.lock, flags); + flags = lock_rtas(); rtas.args = args; enter_rtas(__pa(&rtas.args)); @@ -848,7 +869,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) if (args.rets[0] == -1) errbuf = __fetch_rtas_last_error(buff_copy); - spin_unlock_irqrestore(&rtas.lock, flags); + unlock_rtas(flags); if (buff_copy) { if (errbuf) @@ -951,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node, /* break now */ return 1; } + +static raw_spinlock_t timebase_lock; +static u64 timebase = 0; + +void __cpuinit rtas_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + __raw_spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + __raw_spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); + local_irq_restore(flags); +} + +void __cpuinit rtas_take_timebase(void) +{ + while (!timebase) + barrier(); + __raw_spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + __raw_spin_unlock(&timebase_lock); +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 1d154248cf4..e1e3059cf34 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr) */ notrace void __init machine_init(unsigned long dt_ptr) { + lockdep_init(); + /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 65484b2200b..0b47de07302 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map); /* SMP operations for this machine */ struct smp_ops_t *smp_ops; -static volatile unsigned int cpu_callin_map[NR_CPUS]; +/* Can't be static due to PowerMac hackery */ +volatile unsigned int cpu_callin_map[NR_CPUS]; int smt_enabled_at_boot = 1; diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 0362a891e54..acb74a17bbb 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void) #ifdef CONFIG_PPC_EARLY_DEBUG_44x #include <platforms/44x/44x.h> -static int udbg_44x_as1_flush(void) +static void udbg_44x_as1_flush(void) { if (udbg_comport) { while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0) diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 2d2192e48de..3e68363405b 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o +obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c index bc400c78c97..bc122a120bf 100644 --- a/arch/powerpc/mm/gup.c +++ b/arch/powerpc/mm/gup.c @@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, int psize; #endif - pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); start &= PAGE_MASK; addr = start; @@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, start, len))) goto slow_irqon; - pr_debug(" aligned: %lx .. %lx\n", start, end); + pr_devel(" aligned: %lx .. %lx\n", start, end); #ifdef CONFIG_HUGETLB_PAGE /* We bail out on slice boundary crossing when hugetlb is @@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, do { VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); ptep = huge_pte_offset(mm, a); - pr_debug(" %016lx: huge ptep %p\n", a, ptep); + pr_devel(" %016lx: huge ptep %p\n", a, ptep); if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, &nr)) goto slow; @@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, #ifdef CONFIG_PPC64 VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); #endif - pr_debug(" %016lx: normal pgd %p\n", addr, + pr_devel(" %016lx: normal pgd %p\n", addr, (void *)pgd_val(pgd)); next = pgd_addr_end(addr, end); if (pgd_none(pgd)) @@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, slow: local_irq_enable(); slow_irqon: - pr_debug(" slow path ! nr = %d\n", nr); + pr_devel(" slow path ! nr = %d\n", nr); /* Try to get the remaining pages with get_user_pages */ start += nr << PAGE_SHIFT; diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c new file mode 100644 index 00000000000..c2186c74c85 --- /dev/null +++ b/arch/powerpc/mm/highmem.c @@ -0,0 +1,77 @@ +/* + * highmem.c: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + * + * Reworked for PowerPC by various contributors. Moved from + * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp. + */ + +#include <linux/highmem.h> +#include <linux/module.h> + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) +{ + unsigned int idx; + unsigned long vaddr; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + debug_kmap_atomic(type); + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(!pte_none(*(kmap_pte-idx))); +#endif + __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1); + local_flush_tlb_page(NULL, vaddr); + + return (void*) vaddr; +} +EXPORT_SYMBOL(kmap_atomic_prot); + +void kunmap_atomic(void *kvaddr, enum km_type type) +{ +#ifdef CONFIG_DEBUG_HIGHMEM + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); + + if (vaddr < __fix_to_virt(FIX_KMAP_END)) { + pagefault_enable(); + return; + } + + BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte-idx); + local_flush_tlb_page(NULL, vaddr); +#endif + pagefault_enable(); +} +EXPORT_SYMBOL(kunmap_atomic); diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 8343986809c..92a197117d5 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id) id = first_context; continue; } - pr_debug("[%d] steal context %d from mm @%p\n", + pr_devel("[%d] steal context %d from mm @%p\n", smp_processor_id(), id, mm); /* Mark this mm has having no context anymore */ @@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id) /* Pick up the victim mm */ mm = context_mm[id]; - pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm); + pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm); /* Flush the TLB for that context */ local_flush_tlb_mm(mm); @@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) spin_lock(&context_lock); #ifndef DEBUG_STEAL_ONLY - pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n", + pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n", cpu, next, next->context.active, next->context.id); #endif @@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next->context.active++; if (prev) { #ifndef DEBUG_STEAL_ONLY - pr_debug(" old context %p active was: %d\n", + pr_devel(" old context %p active was: %d\n", prev, prev->context.active); #endif WARN_ON(prev->context.active < 1); @@ -236,7 +236,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) next->context.id = id; #ifndef DEBUG_STEAL_ONLY - pr_debug("[%d] picked up new id %d, nrf is now %d\n", + pr_devel("[%d] picked up new id %d, nrf is now %d\n", cpu, id, nr_free_contexts); #endif @@ -247,7 +247,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) * local TLB for it and unmark it before we use it */ if (test_bit(id, stale_map[cpu])) { - pr_debug("[%d] flushing stale context %d for mm @%p !\n", + pr_devel("[%d] flushing stale context %d for mm @%p !\n", cpu, id, next); local_flush_tlb_mm(next); @@ -314,13 +314,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: - pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu); + pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu); stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: case CPU_DEAD_FROZEN: - pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu); + pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu); kfree(stale_map[cpu]); stale_map[cpu] = NULL; break; diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index ae1d67cc090..627767d6169 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte) page = pfn_to_page(pfn); if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - pr_debug("do_dcache_icache_coherency... flushing\n"); + pr_devel("do_dcache_icache_coherency... flushing\n"); flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } else - pr_debug("do_dcache_icache_coherency... already clean\n"); + pr_devel("do_dcache_icache_coherency... already clean\n"); return __pte(pte_val(pte) | _PAGE_HWEXEC); } diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 3b52c80e5e3..5b7038f248b 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -14,8 +14,6 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG - #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/mmu_context.h> @@ -27,11 +25,6 @@ #include <linux/compiler.h> #include <asm/udbg.h> -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG pr_debug -#endif extern void slb_allocate_realmode(unsigned long ea); extern void slb_allocate_user(unsigned long ea); @@ -285,13 +278,13 @@ void slb_initialize(void) patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); - DBG("SLB: linear LLP = %04lx\n", linear_llp); - DBG("SLB: io LLP = %04lx\n", io_llp); + pr_devel("SLB: linear LLP = %04lx\n", linear_llp); + pr_devel("SLB: io LLP = %04lx\n", io_llp); #ifdef CONFIG_SPARSEMEM_VMEMMAP patch_slb_encoding(slb_miss_kernel_load_vmemmap, SLB_VSID_KERNEL | vmemmap_llp); - DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); + pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); #endif } diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 1be1b5e5979..937eb90677d 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, */ if (huge) { #ifdef CONFIG_HUGETLB_PAGE - psize = get_slice_psize(mm, addr);; + psize = get_slice_psize(mm, addr); #else BUG(); psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */ diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c index 258fa4411e9..c591339daf5 100644 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, goto fail; if (shdr_str.sh_type != SHT_STRTAB) - goto fail;; + goto fail; for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { if (copy_from_user(&sym, spu_elf_start + diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 42e09a9f77e..e5c1b096c3e 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/of_gpio.h> +#include <linux/of_i2c.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -63,9 +64,6 @@ define_machine(warp) { }; -static u32 post_info; - -/* I am not sure this is the best place for this... */ static int __init warp_post_info(void) { struct device_node *np; @@ -87,10 +85,9 @@ static int __init warp_post_info(void) iounmap(fpga); - if (post1 || post2) { + if (post1 || post2) printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); - post_info = 1; - } else + else printk(KERN_INFO "Warp POST OK\n"); return 0; @@ -166,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context) value ^= 1; mdelay(500); } + + /* Not reached */ + return IRQ_HANDLED; } static int pika_setup_leds(void) @@ -179,24 +179,19 @@ static int pika_setup_leds(void) } for_each_child_of_node(np, child) - if (strcmp(child->name, "green") == 0) { + if (strcmp(child->name, "green") == 0) green_led = of_get_gpio(child, 0); - /* Turn back on the green LED */ - gpio_set_value(green_led, 1); - } else if (strcmp(child->name, "red") == 0) { + else if (strcmp(child->name, "red") == 0) red_led = of_get_gpio(child, 0); - /* Set based on post */ - gpio_set_value(red_led, post_info); - } of_node_put(np); return 0; } -static void pika_setup_critical_temp(struct i2c_client *client) +static void pika_setup_critical_temp(struct device_node *np, + struct i2c_client *client) { - struct device_node *np; int irq, rc; /* Do this before enabling critical temp interrupt since we @@ -208,14 +203,7 @@ static void pika_setup_critical_temp(struct i2c_client *client) i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ - np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); - if (np == NULL) { - printk(KERN_ERR __FILE__ ": Unable to find ad7414\n"); - return; - } - irq = irq_of_parse_and_map(np, 0); - of_node_put(np); if (irq == NO_IRQ) { printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n"); return; @@ -244,32 +232,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga) static int pika_dtm_thread(void __iomem *fpga) { - struct i2c_adapter *adap; + struct device_node *np; struct i2c_client *client; - /* We loop in case either driver was compiled as a module and - * has not been insmoded yet. - */ - while (!(adap = i2c_get_adapter(0))) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ); - } - - while (1) { - list_for_each_entry(client, &adap->clients, list) - if (client->addr == 0x4a) - goto found_it; + np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); + if (np == NULL) + return -ENOENT; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ); + client = of_find_i2c_device_by_node(np); + if (client == NULL) { + of_node_put(np); + return -ENOENT; } -found_it: - pika_setup_critical_temp(client); + pika_setup_critical_temp(np, client); - i2c_put_adapter(adap); + of_node_put(np); - printk(KERN_INFO "PIKA DTM thread running.\n"); + printk(KERN_INFO "Warp DTM thread running.\n"); while (!kthread_should_stop()) { int val; @@ -291,7 +271,6 @@ found_it: return 0; } - static int __init pika_dtm_start(void) { struct task_struct *dtm_thread; diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c index ddf0bdc0fc8..7ee979f323d 100644 --- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c +++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void) goto out; } - priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic)); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { of_node_put(np); ret = -ENOMEM; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 77f90b35635..60ed9c067b1 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = { { .type = "qe", }, { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, + { .compatible = "fsl,rapidio-delta", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index cc0b0db8a6f..62c592ede64 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr) pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); - local_irq_save(flags); - np = of_get_cpu_node(nr, NULL); cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL); if (cpu_rel_addr == NULL) { printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr); - local_irq_restore(flags); return; } /* Map the spin table */ bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); + local_irq_save(flags); + out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); @@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr) while ((__secondary_hold_acknowledge != nr) && (++n < 1000)) mdelay(1); - iounmap(bptr_vaddr); - local_irq_restore(flags); + iounmap(bptr_vaddr); + pr_debug("waited %d msecs for CPU #%d.\n", n, nr); } diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c index d0e8443b12c..747d8fb3ab8 100644 --- a/arch/powerpc/platforms/85xx/socrates.c +++ b/arch/powerpc/platforms/85xx/socrates.c @@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = { {}, }; -static void __init socrates_init(void) +static int __init socrates_publish_devices(void) { - of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL); + return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL); } +machine_device_initcall(socrates, socrates_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -124,7 +125,6 @@ define_machine(socrates) { .name = "Socrates", .probe = socrates_probe, .setup_arch = socrates_setup_arch, - .init = socrates_init, .init_IRQ = socrates_pic_init, .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c index ee01532786e..1b426050a2f 100644 --- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -32,7 +32,6 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -#include <linux/of_platform.h> /* A few bit definitions needed for fixups on some boards */ #define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index c71498dbf21..aca5741ddc6 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn, static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val) { - pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); + pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); dcr_write(msic->dcr_host, dcr_n, val); } @@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) int retry = 0; write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG); - pr_debug("axon_msi: original write_offset 0x%x\n", write_offset); + pr_devel("axon_msi: original write_offset 0x%x\n", write_offset); /* write_offset doesn't wrap properly, so we have to mask it */ write_offset &= MSIC_FIFO_SIZE_MASK; @@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) msi = le32_to_cpu(msic->fifo_virt[idx]); msi &= 0xFFFF; - pr_debug("axon_msi: woff %x roff %x msi %x\n", + pr_devel("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) { @@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) */ udelay(1); retry++; - pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + pr_devel("axon_msi: invalid irq 0x%x!\n", msi); continue; } if (retry) { - pr_debug("axon_msi: late irq 0x%x, retry %d\n", + pr_devel("axon_msi: late irq 0x%x, retry %d\n", msi, retry); retry = 0; } @@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device) struct axon_msic *msic = dev_get_drvdata(&device->dev); u32 tmp; - pr_debug("axon_msi: disabling %s\n", + pr_devel("axon_msi: disabling %s\n", msic->irq_host->of_node->full_name); tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG); tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE; @@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device, unsigned int virq; int dcr_base, dcr_len; - pr_debug("axon_msi: setting up dn %s\n", dn->full_name); + pr_devel("axon_msi: setting up dn %s\n", dn->full_name); msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL); if (!msic) { @@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device, set_irq_data(virq, msic); set_irq_chained_handler(virq, axon_msi_cascade); - pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq); + pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq); /* Enable the MSIC hardware */ msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32); @@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) addr = of_translate_address(dn, of_get_property(dn, "reg", NULL)); if (addr == OF_BAD_ADDR) { - pr_debug("axon_msi: couldn't translate reg property\n"); + pr_devel("axon_msi: couldn't translate reg property\n"); return; } msic->trigger = ioremap(addr, 0x4); if (!msic->trigger) { - pr_debug("axon_msi: ioremap failed\n"); + pr_devel("axon_msi: ioremap failed\n"); return; } @@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) if (!debugfs_create_file(name, 0600, powerpc_debugfs_root, msic, &fops_msic)) { - pr_debug("axon_msi: debugfs_create_file failed!\n"); + pr_devel("axon_msi: debugfs_create_file failed!\n"); return; } } diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index 9046803c827..bc97fada48c 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -36,7 +36,6 @@ #include <asm/prom.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/time.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/firmware.h> @@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu) mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); } -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase = 0; - -static void __devinit cell_give_timebase(void) -{ - spin_lock(&timebase_lock); - rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); -} - -static void __devinit cell_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - static void __devinit smp_cell_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -224,8 +198,8 @@ void __init smp_init_cell(void) /* Non-lpar has additional take/give timebase */ if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { - smp_ops->give_timebase = cell_give_timebase; - smp_ops->take_timebase = cell_take_timebase; + smp_ops->give_timebase = rtas_give_timebase; + smp_ops->take_timebase = rtas_take_timebase; } DBG(" <- smp_init_cell()\n"); diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 10a4a4d063b..02cafecc90e 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -26,7 +26,6 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/time.h> #include <asm/machdep.h> #include <asm/mpic.h> #include <asm/rtas.h> @@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr) mpic_setup_this_cpu(); } -static DEFINE_SPINLOCK(timebase_lock); -static unsigned int timebase_upper = 0, timebase_lower = 0; - -void __devinit smp_chrp_give_timebase(void) -{ - spin_lock(&timebase_lock); - rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); - timebase_upper = get_tbu(); - timebase_lower = get_tbl(); - spin_unlock(&timebase_lock); - - while (timebase_upper || timebase_lower) - barrier(); - rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); -} - -void __devinit smp_chrp_take_timebase(void) -{ - while (!(timebase_upper || timebase_lower)) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase_upper, timebase_lower); - timebase_upper = 0; - timebase_lower = 0; - spin_unlock(&timebase_lock); - printk("CPU %i taken timebase\n", smp_processor_id()); -} - /* CHRP with openpic */ struct smp_ops_t chrp_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, .kick_cpu = smp_chrp_kick_cpu, .setup_cpu = smp_chrp_setup_cpu, - .give_timebase = smp_chrp_give_timebase, - .take_timebase = smp_chrp_take_timebase, + .give_timebase = rtas_give_timebase, + .take_timebase = rtas_take_timebase, }; diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 153051eb6d9..a4619347aa7 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -71,20 +71,25 @@ static void pas_restart(char *cmd) } #ifdef CONFIG_SMP -static DEFINE_SPINLOCK(timebase_lock); +static raw_spinlock_t timebase_lock; static unsigned long timebase; static void __devinit pas_give_timebase(void) { - spin_lock(&timebase_lock); + unsigned long flags; + + local_irq_save(flags); + hard_irq_disable(); + __raw_spin_lock(&timebase_lock); mtspr(SPRN_TBCTL, TBCTL_FREEZE); isync(); timebase = get_tb(); - spin_unlock(&timebase_lock); + __raw_spin_unlock(&timebase_lock); while (timebase) barrier(); mtspr(SPRN_TBCTL, TBCTL_RESTART); + local_irq_restore(flags); } static void __devinit pas_take_timebase(void) @@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void) while (!timebase) smp_rmb(); - spin_lock(&timebase_lock); + __raw_spin_lock(&timebase_lock); set_tb(timebase >> 32, timebase & 0xffffffff); timebase = 0; - spin_unlock(&timebase_lock); + __raw_spin_unlock(&timebase_lock); } struct smp_ops_t pas_smp_ops = { diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 22ecfbe7183..708c7513337 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode) static struct pmf_function *pfunc_cpu_setfreq_high; static struct pmf_function *pfunc_cpu_setfreq_low; static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done;; +static struct pmf_function *pfunc_slewing_done; static int g5_pfunc_switch_freq(int speed_mode) { diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index dce73634910..d212006a5b3 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void) np = of_find_node_by_name(NULL, "via-pmu"); if (np == NULL) goto not_found; - viaint = irq_of_parse_and_map(np, 0);; + viaint = irq_of_parse_and_map(np, 0); not_found: #endif /* CONFIG_ADB_PMU */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 86f69a4eb49..c2052265636 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs; EXPORT_SYMBOL(smu_cmdbuf_abs); #endif -#ifdef CONFIG_SMP -extern struct smp_ops_t psurge_smp_ops; -extern struct smp_ops_t core99_smp_ops; -#endif /* CONFIG_SMP */ - static void pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; @@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void) ROOT_DEV = DEFAULT_ROOT_DEVICE; #endif -#ifdef CONFIG_SMP - /* Check for Core99 */ - ic = of_find_node_by_name(NULL, "uni-n"); - if (!ic) - ic = of_find_node_by_name(NULL, "u3"); - if (!ic) - ic = of_find_node_by_name(NULL, "u4"); - if (ic) { - of_node_put(ic); - smp_ops = &core99_smp_ops; - } -#ifdef CONFIG_PPC32 - else { - /* - * We have to set bits in cpu_possible_map here since the - * secondary CPU(s) aren't in the device tree, and - * setup_per_cpu_areas only allocates per-cpu data for - * CPUs in the cpu_possible_map. - */ - int cpu; - - for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) - cpu_set(cpu, cpu_possible_map); - smp_ops = &psurge_smp_ops; - } -#endif -#endif /* CONFIG_SMP */ - #ifdef CONFIG_ADB if (strstr(cmd_line, "adb_sync")) { extern int __adb_probe_sync; @@ -512,6 +479,14 @@ static void __init pmac_init_early(void) #ifdef CONFIG_PPC64 iommu_init_early_dart(); #endif + + /* SMP Init has to be done early as we need to patch up + * cpu_possible_map before interrupt stacks are allocated + * or kaboom... + */ +#ifdef CONFIG_SMP + pmac_setup_smp(); +#endif } static int __init pmac_declare_of_platform_devices(void) diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index cf1dbe75889..6d4da7b46b4 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -64,10 +64,11 @@ extern void __secondary_start_pmac_0(void); extern int pmac_pfunc_base_install(void); -#ifdef CONFIG_PPC32 +static void (*pmac_tb_freeze)(int freeze); +static u64 timebase; +static int tb_req; -/* Sync flag for HW tb sync */ -static volatile int sec_tb_reset = 0; +#ifdef CONFIG_PPC32 /* * Powersurge (old powermac SMP) support. @@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void) psurge_quad_init(); /* All released cards using this HW design have 4 CPUs */ ncpus = 4; + /* No sure how timebase sync works on those, let's use SW */ + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; } else { iounmap(quad_base); if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { @@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void) psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* - * This is necessary because OF doesn't know about the + /* This is necessary because OF doesn't know about the * secondary cpu(s), and thus there aren't nodes in the * device tree for them, and smp_setup_cpu_maps hasn't - * set their bits in cpu_possible_map and cpu_present_map. + * set their bits in cpu_present_map. */ if (ncpus > NR_CPUS) ncpus = NR_CPUS; - for (i = 1; i < ncpus ; ++i) { + for (i = 1; i < ncpus ; ++i) cpu_set(i, cpu_present_map); - set_hard_smp_processor_id(i, i); - } if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); @@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void) static void __init smp_psurge_kick_cpu(int nr) { unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; - unsigned long a; - int i; + unsigned long a, flags; + int i, j; + + /* Defining this here is evil ... but I prefer hiding that + * crap to avoid giving people ideas that they can do the + * same. + */ + extern volatile unsigned int cpu_callin_map[NR_CPUS]; /* may need to flush here if secondary bats aren't setup */ for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) @@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr) if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + /* This is going to freeze the timeebase, we disable interrupts */ + local_irq_save(flags); + out_be32(psurge_start, start); mb(); psurge_set_ipi(nr); + /* * We can't use udelay here because the timebase is now frozen. */ for (i = 0; i < 2000; ++i) - barrier(); + asm volatile("nop" : : : "memory"); psurge_clr_ipi(nr); - if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); -} - -/* - * With the dual-cpu powersurge board, the decrementers and timebases - * of both cpus are frozen after the secondary cpu is started up, - * until we give the secondary cpu another interrupt. This routine - * uses this to get the timebases synchronized. - * -- paulus. - */ -static void __init psurge_dual_sync_tb(int cpu_nr) -{ - int t; - - set_dec(tb_ticks_per_jiffy); - /* XXX fixme */ - set_tb(0, 0); - - if (cpu_nr > 0) { + /* + * Also, because the timebase is frozen, we must not return to the + * caller which will try to do udelay's etc... Instead, we wait -here- + * for the CPU to callin. + */ + for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) { + for (j = 1; j < 10000; j++) + asm volatile("nop" : : : "memory"); + asm volatile("sync" : : : "memory"); + } + if (!cpu_callin_map[nr]) + goto stuck; + + /* And we do the TB sync here too for standard dual CPU cards */ + if (psurge_type == PSURGE_DUAL) { + while(!tb_req) + barrier(); + tb_req = 0; + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); mb(); - sec_tb_reset = 1; - return; } + stuck: + /* now interrupt the secondary, restarting both TBs */ + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); - /* wait for the secondary to have reset its TB before proceeding */ - for (t = 10000000; t > 0 && !sec_tb_reset; --t) - ; - - /* now interrupt the secondary, starting both TBs */ - psurge_set_ipi(1); + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); } static struct irqaction psurge_irqaction = { @@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = { static void __init smp_psurge_setup_cpu(int cpu_nr) { + if (cpu_nr != 0) + return; - if (cpu_nr == 0) { - /* If we failed to start the second CPU, we should still - * send it an IPI to start the timebase & DEC or we might - * have them stuck. - */ - if (num_online_cpus() < 2) { - if (psurge_type == PSURGE_DUAL) - psurge_set_ipi(1); - return; - } - /* reset the entry point so if we get another intr we won't - * try to startup again */ - out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) - printk(KERN_ERR "Couldn't get primary IPI interrupt"); - } - - if (psurge_type == PSURGE_DUAL) - psurge_dual_sync_tb(cpu_nr); + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + if (setup_irq(30, &psurge_irqaction)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); } void __init smp_psurge_take_timebase(void) { - /* Dummy implementation */ + if (psurge_type != PSURGE_DUAL) + return; + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); } void __init smp_psurge_give_timebase(void) { - /* Dummy implementation */ + /* Nothing to do here */ } /* PowerSurge-style Macs */ @@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = { * Core 99 and later support */ -static void (*pmac_tb_freeze)(int freeze); -static u64 timebase; -static int tb_req; static void smp_core99_give_timebase(void) { @@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void) set_tb(timebase >> 32, timebase & 0xffffffff); timebase = 0; mb(); - set_dec(tb_ticks_per_jiffy/2); local_irq_restore(flags); } @@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = { # endif #endif }; + +void __init pmac_setup_smp(void) +{ + struct device_node *np; + + /* Check for Core99 */ + np = of_find_node_by_name(NULL, "uni-n"); + if (!np) + np = of_find_node_by_name(NULL, "u3"); + if (!np) + np = of_find_node_by_name(NULL, "u4"); + if (np) { + of_node_put(np); + smp_ops = &core99_smp_ops; + } +#ifdef CONFIG_PPC32 + else { + /* We have to set bits in cpu_possible_map here since the + * secondary CPU(s) aren't in the device tree. Various + * things won't be initialized for CPUs not in the possible + * map, so we really need to fix it up here. + */ + int cpu; + + for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) + cpu_set(cpu, cpu_possible_map); + smp_ops = &psurge_smp_ops; + } +#endif /* CONFIG_PPC32 */ +} + diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 9fead0faf38..3f763c5284a 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r) int result; dump_mmio_region(r); -; result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id, r->lpar_addr); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index e3139fa5e55..903eb9eec68 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long hpte_v, hpte_r; if (!(vflags & HPTE_V_BOLTED)) - pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " + pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " "rflags=%lx, vflags=%lx, psize=%d)\n", hpte_group, va, pa, rflags, vflags, psize); @@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, hpte_r = hpte_encode_r(pa, psize) | rflags; if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); + pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ @@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); if (unlikely(lpar_rc == H_PTEG_FULL)) { if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" full\n"); + pr_devel(" full\n"); return -1; } @@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, */ if (unlikely(lpar_rc != H_SUCCESS)) { if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" lpar err %lu\n", lpar_rc); + pr_devel(" lpar err %lu\n", lpar_rc); return -2; } if (!(vflags & HPTE_V_BOLTED)) - pr_debug(" -> slot: %lu\n", slot & 7); + pr_devel(" -> slot: %lu\n", slot & 7); /* Because of iSeries, we have to pass down the secondary * bucket bit here as well @@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot, want_v = hpte_encode_avpn(va, psize, ssize); - pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", + pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", want_v, slot, flags, psize); lpar_rc = plpar_pte_protect(flags, slot, want_v); if (lpar_rc == H_NOT_FOUND) { - pr_debug("not found !\n"); + pr_devel("not found !\n"); return -1; } - pr_debug("ok\n"); + pr_devel("ok\n"); BUG_ON(lpar_rc != H_SUCCESS); @@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, unsigned long lpar_rc; unsigned long dummy1, dummy2; - pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", + pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", slot, va, psize, local); want_v = hpte_encode_avpn(va, psize, ssize); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 1a231c389ba..1f8f6cfb94f 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -35,7 +35,6 @@ #include <asm/prom.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/time.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/firmware.h> @@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu) } #endif /* CONFIG_XICS */ -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase = 0; - -static void __devinit pSeries_give_timebase(void) -{ - spin_lock(&timebase_lock); - rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); -} - -static void __devinit pSeries_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - static void __devinit smp_pSeries_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -209,8 +183,8 @@ static void __init smp_init_pseries(void) /* Non-lpar has additional take/give timebase */ if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { - smp_ops->give_timebase = pSeries_give_timebase; - smp_ops->take_timebase = pSeries_take_timebase; + smp_ops->give_timebase = rtas_give_timebase; + smp_ops->take_timebase = rtas_take_timebase; } pr_debug(" <- smp_init_pSeries()\n"); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index be3581a8c29..419f8a637ff 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq) int call_status; int server; - pr_debug("xics: unmask virq %d\n", virq); + pr_devel("xics: unmask virq %d\n", virq); irq = (unsigned int)irq_map[virq].hwirq; - pr_debug(" -> map to hwirq 0x%x\n", irq); + pr_devel(" -> map to hwirq 0x%x\n", irq); if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) return; @@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq) { unsigned int irq; - pr_debug("xics: mask virq %d\n", virq); + pr_devel("xics: mask virq %d\n", virq); irq = (unsigned int)irq_map[virq].hwirq; if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) @@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node) static int xics_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw); + pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw); /* Insert the interrupt mapping into the radix tree for fast lookup */ irq_radix_revmap_insert(xics_host, virq, hw); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 39db9d1155d..cbb3bed75d3 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr) break; default: str = "Unknown"; - break;; + break; } dev_info(dev, "Hardware port width: %s\n", str); diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index a86d3ce01ea..69e2630c906 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) if (ret) return NULL; - ipic = alloc_bootmem(sizeof(struct ipic)); + ipic = kzalloc(sizeof(*ipic), GFP_KERNEL); if (ipic == NULL) return NULL; - memset(ipic, 0, sizeof(struct ipic)); - ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, &ipic_host_ops, 0); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9c3af504549..3981ae4cb58 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr, } #ifdef CONFIG_PPC_DCR -static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb, +static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node, + struct mpic_reg_bank *rb, unsigned int offset, unsigned int size) { const u32 *dbasep; - dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL); + dbasep = of_get_property(node, "dcr-reg", NULL); - rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size); + rb->dhost = dcr_map(node, *dbasep + offset, size); BUG_ON(!DCR_MAP_OK(rb->dhost)); } -static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr, - struct mpic_reg_bank *rb, unsigned int offset, - unsigned int size) +static inline void mpic_map(struct mpic *mpic, struct device_node *node, + phys_addr_t phys_addr, struct mpic_reg_bank *rb, + unsigned int offset, unsigned int size) { if (mpic->flags & MPIC_USES_DCR) - _mpic_map_dcr(mpic, rb, offset, size); + _mpic_map_dcr(mpic, node, rb, offset, size); else _mpic_map_mmio(mpic, phys_addr, rb, offset, size); } #else /* CONFIG_PPC_DCR */ -#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) +#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s) #endif /* !CONFIG_PPC_DCR */ @@ -507,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); /* Allocate fixups array */ - mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup)); + mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL); BUG_ON(mpic->fixups == NULL); - memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup)); /* Init spinlock */ spin_lock_init(&mpic->fixup_lock); @@ -1052,11 +1052,10 @@ struct mpic * __init mpic_alloc(struct device_node *node, int intvec_top; u64 paddr = phys_addr; - mpic = alloc_bootmem(sizeof(struct mpic)); + mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL); if (mpic == NULL) return NULL; - - memset(mpic, 0, sizeof(struct mpic)); + mpic->name = name; mpic->hc_irq = mpic_irq_chip; @@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, psize /= 4; bits = intvec_top + 1; mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long); - mpic->protected = alloc_bootmem(mapsize); + mpic->protected = kzalloc(mapsize, GFP_KERNEL); BUG_ON(mpic->protected == NULL); - memset(mpic->protected, 0, mapsize); for (i = 0; i < psize; i++) { if (psrc[i] > intvec_top) continue; @@ -1152,8 +1150,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, } /* Map the global registers */ - mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); - mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); + mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000); + mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); /* Reset */ if (flags & MPIC_WANTS_RESET) { @@ -1194,7 +1192,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { - mpic_map(mpic, paddr, &mpic->cpuregs[i], + mpic_map(mpic, node, paddr, &mpic->cpuregs[i], MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE), 0x1000); } @@ -1202,7 +1200,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic_map(mpic, paddr, &mpic->isus[0], + mpic_map(mpic, node, paddr, &mpic->isus[0], MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); @@ -1256,8 +1254,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic_map(mpic, paddr, &mpic->isus[isu_num], 0, + mpic_map(mpic, mpic->irqhost->of_node, + paddr, &mpic->isus[isu_num], 0, MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); + if ((isu_first + mpic->isu_size) > mpic->num_sources) mpic->num_sources = isu_first + mpic->isu_size; } @@ -1351,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic) #ifdef CONFIG_PM /* allocate memory to save mpic state */ - mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save)); + mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data), + GFP_KERNEL); BUG_ON(mpic->save_data == NULL); #endif } diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index daefc93ddff..6ff9d71b4c0 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, */ /* Calculate window size */ - sa = (0xffffffffffffffffull << ilog2(ep_size));; + sa = (0xffffffffffffffffull << ilog2(ep_size)); /* Setup BAR0 */ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); @@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr)); } else { /* Calculate window size */ - sa = (0xffffffffffffffffull << ilog2(size));; + sa = (0xffffffffffffffffull << ilog2(size)); if (res->flags & IORESOURCE_PREFETCH) sa |= 0x8; diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index b28b0e512d6..237e3654f48 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) { unsigned long flags; u8 mcn_shift = 0, dev_shift = 0; + u32 ret; spin_lock_irqsave(&qe_lock, flags); if (cmd == QE_RESET) { @@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) } /* wait for the QE_CR_FLG to clear */ - while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) - cpu_relax(); + ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0, + 100, 0); + /* On timeout (e.g. failure), the expression will be false (ret == 0), + otherwise it will be true (ret == 1). */ spin_unlock_irqrestore(&qe_lock, flags); - return 0; + return ret == 1; } EXPORT_SYMBOL(qe_issue_cmd); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 63cdf9887f3..074905c3ee5 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags, if (ret) return; - qe_ic = alloc_bootmem(sizeof(struct qe_ic)); + qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL); if (qe_ic == NULL) return; - memset(qe_ic, 0, sizeof(struct qe_ic)); - qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); if (qe_ic->irqhost == NULL) diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index d35405c5943..466ce9ace12 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node) BUG_ON(! of_device_is_compatible(node, "ibm,uic")); - uic = alloc_bootmem(sizeof(*uic)); + uic = kzalloc(sizeof(*uic), GFP_KERNEL); if (! uic) return NULL; /* FIXME: panic? */ - memset(uic, 0, sizeof(*uic)); spin_lock_init(&uic->lock); indexp = of_get_property(node, "cell-index", &len); if (!indexp || (len != sizeof(u32))) { diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index a27d0d5a6f8..1cd02f6073a 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -99,7 +99,9 @@ struct kvm_s390_sie_block { __u8 reservedd0[48]; /* 0x00d0 */ __u64 gcr[16]; /* 0x0100 */ __u64 gbea; /* 0x0180 */ - __u8 reserved188[120]; /* 0x0188 */ + __u8 reserved188[24]; /* 0x0188 */ + __u32 fac; /* 0x01a0 */ + __u8 reserved1a4[92]; /* 0x01a4 */ } __attribute__((packed)); struct kvm_vcpu_stat { diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index c18b21d6991..90d9d1ba258 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -25,6 +25,7 @@ #include <asm/lowcore.h> #include <asm/pgtable.h> #include <asm/nmi.h> +#include <asm/system.h> #include "kvm-s390.h" #include "gaccess.h" @@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { NULL } }; +static unsigned long long *facilities; /* Section: not file related */ void kvm_arch_hardware_enable(void *garbage) @@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin; vcpu->arch.sie_block->ecb = 2; vcpu->arch.sie_block->eca = 0xC1002001U; + vcpu->arch.sie_block->fac = (int) (long) facilities; hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet, (unsigned long) vcpu); @@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn) static int __init kvm_s390_init(void) { - return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE); + int ret; + ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE); + if (ret) + return ret; + + /* + * guests can ask for up to 255+1 double words, we need a full page + * to hold the maximum amount of facilites. On the other hand, we + * only set facilities that are known to work in KVM. + */ + facilities = (unsigned long long *) get_zeroed_page(GFP_DMA); + if (!facilities) { + kvm_exit(); + return -ENOMEM; + } + stfle(facilities, 1); + facilities[0] &= 0xff00fff3f0700000ULL; + return 0; } static void __exit kvm_s390_exit(void) { + free_page((unsigned long) facilities); kvm_exit(); } diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 93ecd06e1a7..d426aac8095 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu) vcpu->stat.instruction_stfl++; /* only pass the facility bits, which we can handle */ - facility_list &= 0xfe00fff3; + facility_list &= 0xff00fff3; rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list), &facility_list, sizeof(facility_list)); diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 8ece0b5bd02..39224b57c6e 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -61,10 +61,6 @@ config EARLY_PRINTK select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using the kernel command line option to toggle back and forth. -config DEBUG_BOOTMEM - depends on DEBUG_KERNEL - bool "Debug BOOTMEM initialization" - config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 9c3a33210d6..180455642a4 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port) unsigned short se7206_inw(unsigned long port) { - return *port2adr(port);; + return *port2adr(port); } void se7206_outb(unsigned char value, unsigned long port) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd558b..8fed45a2fb8 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -19,10 +19,13 @@ #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/usb/r8a66597.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <asm/io.h> #include <asm/heartbeat.h> +#include <asm/sh_eth.h> +#include <asm/clock.h> #include <asm/sh_keysc.h> #include <cpu/sh7724.h> #include <mach-se/mach/se7724.h> @@ -272,6 +275,62 @@ static struct platform_device keysc_device = { }, }; +/* SH Eth */ +static struct resource sh_eth_resources[] = { + [0] = { + .start = SH_ETH_ADDR, + .end = SH_ETH_ADDR + 0x1FC, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 91, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +struct sh_eth_plat_data sh_eth_plat = { + .phy = 0x1f, /* SMSC LAN8187 */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = &sh_eth_plat, + }, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .resource = sh_eth_resources, +}; + +static struct r8a66597_platdata sh7724_usb0_host_data = { +}; + +static struct resource sh7724_usb0_host_resources[] = { + [0] = { + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct platform_device sh7724_usb0_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh7724_usb0_host_data, + }, + .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources), + .resource = sh7724_usb0_host_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -280,11 +339,62 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &sh_eth_device, + &sh7724_usb0_host_device, }; +#define EEPROM_OP 0xBA206000 +#define EEPROM_ADR 0xBA206004 +#define EEPROM_DATA 0xBA20600C +#define EEPROM_STAT 0xBA206010 +#define EEPROM_STRT 0xBA206014 +static int __init sh_eth_is_eeprom_ready(void) +{ + int t = 10000; + + while (t--) { + if (!ctrl_inw(EEPROM_STAT)) + return 1; + cpu_relax(); + } + + printk(KERN_ERR "ms7724se can not access to eeprom\n"); + return 0; +} + +static void __init sh_eth_init(void) +{ + int i; + u16 mac[3]; + + /* check EEPROM status */ + if (!sh_eth_is_eeprom_ready()) + return; + + /* read MAC addr from EEPROM */ + for (i = 0 ; i < 3 ; i++) { + ctrl_outw(0x0, EEPROM_OP); /* read */ + ctrl_outw(i*2, EEPROM_ADR); + ctrl_outw(0x1, EEPROM_STRT); + if (!sh_eth_is_eeprom_ready()) + return; + + mac[i] = ctrl_inw(EEPROM_DATA); + mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + } + + /* reset sh-eth */ + ctrl_outl(0x1, SH_ETH_ADDR + 0x0); + + /* set MAC addr */ + ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); + ctrl_outl((mac[2]), SH_ETH_MALR); +} + #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 #define SW41_A 0x0100 #define SW41_B 0x0200 @@ -294,6 +404,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { #define SW41_F 0x2000 #define SW41_G 0x4000 #define SW41_H 0x8000 + static int __init devices_setup(void) { u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ @@ -302,9 +413,16 @@ static int __init devices_setup(void) ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ - (1 << 12)), /* USB0 */ + (1 << 12) | /* USB0 */ + (1 << 14)), /* RMII */ FPGA_OUT); + /* turn on USB clocks, use external clock */ + ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + + /* enable USB0 port */ + ctrl_outw(0x0600, 0xa40501d4); + /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); gpio_request(GPIO_FN_INTC_IRQ1, NULL); @@ -374,7 +492,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO0_CLK, NULL); gpio_request(GPIO_FN_VIO0_FLD, NULL); gpio_request(GPIO_FN_VIO0_HD, NULL); - platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20); /* enable CEU1 */ gpio_request(GPIO_FN_VIO1_D7, NULL); @@ -389,7 +507,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO1_HD, NULL); gpio_request(GPIO_FN_VIO1_VD, NULL); gpio_request(GPIO_FN_VIO1_CLK, NULL); - platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); @@ -404,6 +522,28 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT1, NULL); gpio_request(GPIO_FN_KEYOUT0, NULL); + /* + * enable SH-Eth + * + * please remove J33 pin from your board !! + * + * ms7724 board should not use GPIO_FN_LNKSTA pin + * So, This time PTX5 is set to input pin + */ + gpio_request(GPIO_FN_RMII_RXD0, NULL); + gpio_request(GPIO_FN_RMII_RXD1, NULL); + gpio_request(GPIO_FN_RMII_TXD0, NULL); + gpio_request(GPIO_FN_RMII_TXD1, NULL); + gpio_request(GPIO_FN_RMII_REF_CLK, NULL); + gpio_request(GPIO_FN_RMII_TX_EN, NULL); + gpio_request(GPIO_FN_RMII_RX_ER, NULL); + gpio_request(GPIO_FN_RMII_CRS_DV, NULL); + gpio_request(GPIO_FN_MDIO, NULL); + gpio_request(GPIO_FN_MDC, NULL); + gpio_request(GPIO_PTX5, NULL); + gpio_direction_input(GPIO_PTX5); + sh_eth_init(); + if (sw & SW41_B) { /* SVGA */ lcdc_info.ch[0].lcd_cfg.xres = 800; @@ -437,7 +577,7 @@ static int __init devices_setup(void) } return platform_add_devices(ms7724se_devices, - ARRAY_SIZE(ms7724se_devices)); + ARRAY_SIZE(ms7724se_devices)); } device_initcall(devices_setup); diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index da627d22c00..b18cfd39cac 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp" # # Bus options @@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +CONFIG_LOGO_SUPERH_VGA16=y +# CONFIG_LOGO_SUPERH_CLUT224 is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index 3840270283e..3ee783a0a07 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30 -# Thu Jun 18 16:09:05 2009 +# Mon Jun 29 16:28:43 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -88,10 +91,12 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y # # Performance Counters # +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y @@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set @@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -# CONFIG_SH_ETH is not set +CONFIG_SH_ETH=y CONFIG_SMC91X=y # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set @@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_FILE_LOCKING=y diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h index a8153c2aa6f..d8e6bb9c0cc 100644 --- a/arch/sh/include/asm/perf_counter.h +++ b/arch/sh/include/asm/perf_counter.h @@ -2,6 +2,8 @@ #define __ASM_SH_PERF_COUNTER_H /* SH only supports software counters through this interface. */ -#define set_perf_counter_pending() do { } while (0) +static inline void set_perf_counter_pending(void) {} + +#define PERF_COUNTER_INDEX_OFFSET 0 #endif /* __ASM_SH_PERF_COUNTER_H */ diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h index 5bc34681d99..6f83f2cc45c 100644 --- a/arch/sh/include/asm/syscall_32.h +++ b/arch/sh/include/asm/syscall_32.h @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/err.h> #include <asm/ptrace.h> /* The system call number is given by the user in R3 */ diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h index 74164b60d0d..29514a39d0f 100644 --- a/arch/sh/include/mach-se/mach/se7724.h +++ b/arch/sh/include/mach-se/mach/se7724.h @@ -20,6 +20,11 @@ */ #include <asm/addrspace.h> +/* SH Eth */ +#define SH_ETH_ADDR (0xA4600000) +#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0) +#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8) + #define PA_LED (0xba203000) /* 8bit LED */ #define IRQ_MODE (0xba200010) #define IRQ0_SR (0xba200014) diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index cc8ddbdf3d7..71925946f1e 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -15,12 +15,28 @@ #include <linux/mm.h> #include <linux/hardirq.h> #include <linux/kprobes.h> -#include <linux/marker.h> +#include <linux/perf_counter.h> #include <asm/io_trapped.h> #include <asm/system.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> +static inline int notify_page_fault(struct pt_regs *regs, int trap) +{ + int ret = 0; + +#ifdef CONFIG_KPROBES + if (!user_mode(regs)) { + preempt_disable(); + if (kprobe_running() && kprobe_fault_handler(regs, trap)) + ret = 1; + preempt_enable(); + } +#endif + + return ret; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + mm = tsk->mm; + + if (unlikely(notify_page_fault(regs, lookup_exception_vector()))) + return; + /* Only enable interrupts if they were on before the fault */ - if ((regs->sr & SR_IMASK) != SR_IMASK) { - trace_hardirqs_on(); + if ((regs->sr & SR_IMASK) != SR_IMASK) local_irq_enable(); - } - mm = tsk->mm; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* * If we're in an interrupt or have no user @@ -141,10 +160,15 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } up_read(&mm->mmap_sem); return; @@ -245,22 +269,6 @@ do_sigbus: goto no_context; } -static inline int notify_page_fault(struct pt_regs *regs, int trap) -{ - int ret = 0; - -#ifdef CONFIG_KPROBES - if (!user_mode(regs)) { - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, trap)) - ret = 1; - preempt_enable(); - } -#endif - - return ret; -} - /* * Called with interrupts disabled. */ @@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, pmd_t *pmd; pte_t *pte; pte_t entry; - int ret = 0; - - if (notify_page_fault(regs, lookup_exception_vector())) - goto out; - - ret = 1; + int ret = 1; /* * We don't take page faults for P1, P2, and parts of P4, these diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c index fcbb6e135ce..3ce40ea3482 100644 --- a/arch/sh/mm/tlbflush_64.c +++ b/arch/sh/mm/tlbflush_64.c @@ -3,7 +3,7 @@ * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes) - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -20,6 +20,7 @@ #include <linux/mman.h> #include <linux/mm.h> #include <linux/smp.h> +#include <linux/perf_counter.h> #include <linux/interrupt.h> #include <asm/system.h> #include <asm/io.h> @@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, /* Not an IO address, so reenable interrupts */ local_irq_enable(); + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. @@ -195,10 +198,16 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; - else + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { tsk->min_flt++; + perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } /* If we get here, the page fault has been handled. Do the TLB refill now from the newly-setup PTE, to avoid having to fault again right diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile index 96041a8d39e..1ff0fd92475 100644 --- a/arch/sparc/boot/Makefile +++ b/arch/sparc/boot/Makefile @@ -15,7 +15,7 @@ quiet_cmd_elftoaout = ELFTOAOUT $@ ifeq ($(CONFIG_SPARC32),y) quiet_cmd_piggy = PIGGY $@ - cmd_piggy = $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG) + cmd_piggy = $(obj)/piggyback_32 $@ System.map $(ROOT_IMG) quiet_cmd_btfix = BTFIX $@ cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@ quiet_cmd_sysmap = SYSMAP $(obj)/System.map @@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE $(obj)/zImage: $(obj)/image $(call if_changed,strip) -$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE +$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE $(call if_changed,elftoaout) $(call if_changed,piggy) @@ -79,7 +79,7 @@ $(obj)/image: vmlinux FORCE $(call if_changed,strip) @echo ' kernel: $@ is ready' -$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE +$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE $(call if_changed,elftoaout) $(call if_changed,piggy) @echo ' kernel: $@ is ready' diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c index c9f500c1a8b..e8dc9adfcd6 100644 --- a/arch/sparc/boot/piggyback_32.c +++ b/arch/sparc/boot/piggyback_32.c @@ -70,7 +70,7 @@ void die(char *str) int main(int argc,char **argv) { static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 }; - unsigned char buffer[1024], *q, *r; + char buffer[1024], *q, *r; unsigned int i, j, k, start, end, offset; FILE *map; struct stat s; @@ -84,7 +84,7 @@ int main(int argc,char **argv) while (fgets (buffer, 1024, map)) { if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n")) start = strtoul (buffer, NULL, 16); - else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n")) + else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n")) end = strtoul (buffer, NULL, 16); } fclose (map); diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c index de364bfed0b..c63fd1b6bdd 100644 --- a/arch/sparc/boot/piggyback_64.c +++ b/arch/sparc/boot/piggyback_64.c @@ -46,6 +46,7 @@ int main(int argc,char **argv) struct stat s; int image, tail; + start = end = 0; if (stat (argv[3], &s) < 0) die (argv[3]); map = fopen (argv[2], "r"); if (!map) die(argv[2]); diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index bd075054942..f0ee7905540 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -20,7 +20,6 @@ #include <linux/delay.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/bootmem.h> #include <linux/irq.h> #include <asm/ptrace.h> @@ -914,25 +913,19 @@ void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu) tb->nonresum_qmask); } -static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask) -{ - unsigned long size = PAGE_ALIGN(qmask + 1); - void *p = __alloc_bootmem(size, size, 0); - if (!p) { - prom_printf("SUN4V: Error, cannot allocate mondo queue.\n"); - prom_halt(); - } - - *pa_ptr = __pa(p); -} - -static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask) +/* Each queue region must be a power of 2 multiple of 64 bytes in + * size. The base real address must be aligned to the size of the + * region. Thus, an 8KB queue must be 8KB aligned, for example. + */ +static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask) { unsigned long size = PAGE_ALIGN(qmask + 1); - void *p = __alloc_bootmem(size, size, 0); + unsigned long order = get_order(size); + unsigned long p; + p = __get_free_pages(GFP_KERNEL, order); if (!p) { - prom_printf("SUN4V: Error, cannot allocate kbuf page.\n"); + prom_printf("SUN4V: Error, cannot allocate queue.\n"); prom_halt(); } @@ -942,11 +935,11 @@ static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask) static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb) { #ifdef CONFIG_SMP - void *page; + unsigned long page; BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64)); - page = alloc_bootmem_pages(PAGE_SIZE); + page = get_zeroed_page(GFP_KERNEL); if (!page) { prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n"); prom_halt(); @@ -965,13 +958,13 @@ static void __init sun4v_init_mondo_queues(void) for_each_possible_cpu(cpu) { struct trap_per_cpu *tb = &trap_block[cpu]; - alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask); - alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask); - alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask); - alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask); - alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask); - alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, - tb->nonresum_qmask); + alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask); + alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask); + alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask); + alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask); + alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask); + alloc_one_queue(&tb->nonresum_kernel_buf_pa, + tb->nonresum_qmask); } } @@ -999,7 +992,7 @@ void __init init_IRQ(void) kill_prom_timer(); size = sizeof(struct ino_bucket) * NUM_IVECS; - ivector_table = alloc_bootmem(size); + ivector_table = kzalloc(size, GFP_KERNEL); if (!ivector_table) { prom_printf("Fatal error, cannot allocate ivector_table\n"); prom_halt(); diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c index 5ec17563142..dd2aadc14af 100644 --- a/arch/um/drivers/slip_kern.c +++ b/arch/um/drivers/slip_kern.c @@ -30,7 +30,6 @@ static void slip_init(struct net_device *dev, void *data) slip_proto_init(&spri->slip); - dev->init = NULL; dev->hard_header_len = 0; dev->header_ops = NULL; dev->addr_len = 0; diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c index f15a6e7654f..e376284f0fb 100644 --- a/arch/um/drivers/slirp_kern.c +++ b/arch/um/drivers/slirp_kern.c @@ -32,7 +32,6 @@ void slirp_init(struct net_device *dev, void *data) slip_proto_init(&spri->slip); - dev->init = NULL; dev->hard_header_len = 0; dev->header_ops = NULL; dev->addr_len = 0; diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h index 90fc708b320..378de4bbf49 100644 --- a/arch/um/include/asm/dma-mapping.h +++ b/arch/um/include/asm/dma-mapping.h @@ -79,14 +79,14 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, } static inline void -dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size, +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { BUG(); } static inline void -dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems, +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction) { BUG(); diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index 56d43d0a396..0960de54495 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -70,8 +70,8 @@ void show_stack(struct task_struct *task, unsigned long *esp) if (kstack_end(stack)) break; if (i && ((i % 8) == 0)) - printk("\n" KERN_INFO " "); - printk("%08lx ", *stack++); + printk(KERN_INFO " "); + printk(KERN_CONT "%08lx ", *stack++); } show_trace(task, esp); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d1430ef6b4f..738bdc6b0f8 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1913,25 +1913,26 @@ config DMAR_DEFAULT_ON recommended you say N here while the DMAR code remains experimental. -config DMAR_GFX_WA - def_bool y - prompt "Support for Graphics workaround" +config DMAR_BROKEN_GFX_WA + def_bool n + prompt "Workaround broken graphics drivers (going away soon)" depends on DMAR ---help--- Current Graphics drivers tend to use physical address for DMA and avoid using DMA APIs. Setting this config option permits the IOMMU driver to set a unity map for all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA. + to use physical addresses for DMA, at least until this + option is removed in the 2.6.32 kernel. config DMAR_FLOPPY_WA def_bool y depends on DMAR ---help--- - Floppy disk drivers are know to bypass DMA API calls + Floppy disk drivers are known to bypass DMA API calls thereby failing to work when IOMMU is enabled. This workaround will setup a 1:1 mapping for the first - 16M to make floppy (an ISA device) work. + 16MiB to make floppy (an ISA device) work. config INTR_REMAP bool "Support for Interrupt Remapping (EXPERIMENTAL)" diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c index d660be49236..49e0c18833e 100644 --- a/arch/x86/boot/video-bios.c +++ b/arch/x86/boot/video-bios.c @@ -37,14 +37,13 @@ static int set_bios_mode(u8 mode) ireg.al = mode; /* AH=0x00 Set Video Mode */ intcall(0x10, &ireg, NULL); - ireg.ah = 0x0f; /* Get Current Video Mode */ intcall(0x10, &ireg, &oreg); do_restore = 1; /* Assume video contents were lost */ /* Not all BIOSes are clean with the top bit */ - new_mode = ireg.al & 0x7f; + new_mode = oreg.al & 0x7f; if (new_mode == mode) return 0; /* Mode change OK */ diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index c700147d6ff..275dd177f19 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -45,7 +45,7 @@ static int vesa_probe(void) ireg.di = (size_t)&vginfo; intcall(0x10, &ireg, &oreg); - if (ireg.ax != 0x004f || + if (oreg.ax != 0x004f || vginfo.signature != VESA_MAGIC || vginfo.version < 0x0102) return 0; /* Not present */ @@ -70,7 +70,7 @@ static int vesa_probe(void) ireg.di = (size_t)&vminfo; intcall(0x10, &ireg, &oreg); - if (ireg.ax != 0x004f) + if (oreg.ax != 0x004f) continue; if ((vminfo.mode_attr & 0x15) == 0x05) { diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index 418e632d4a8..7a1065958ba 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -8,7 +8,7 @@ #ifdef __KERNEL__ -#include <asm/page_types.h> +#include <asm/pgtable_types.h> /* Physical address where kernel should be loaded. */ #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ @@ -16,10 +16,10 @@ & ~(CONFIG_PHYSICAL_ALIGN - 1)) /* Minimum kernel alignment, as a power of two */ -#ifdef CONFIG_x86_64 +#ifdef CONFIG_X86_64 #define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT #else -#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1) +#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_ORDER) #endif #define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2) diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 2d81af3974a..7b2d71df39a 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -111,12 +111,9 @@ enum fixed_addresses { #ifdef CONFIG_PARAVIRT FIX_PARAVIRT_BOOTMAP, #endif - FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */ - FIX_TEXT_POKE1, + FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */ + FIX_TEXT_POKE0, /* first page is last, because allocation is backward */ __end_of_permanent_fixed_addresses, -#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT - FIX_OHCI1394_BASE, -#endif /* * 256 temporary boot-time mappings, used by early_ioremap(), * before ioremap() is functional. @@ -129,6 +126,9 @@ enum fixed_addresses { FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 - (__end_of_permanent_fixed_addresses & 255), FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1, +#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT + FIX_OHCI1394_BASE, +#endif #ifdef CONFIG_X86_32 FIX_WP_TEST, #endif diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 1692fb5050e..6be7fc254b5 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -246,10 +246,6 @@ #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38) #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39) -/* Intel Model 6 */ -#define MSR_P6_EVNTSEL0 0x00000186 -#define MSR_P6_EVNTSEL1 0x00000187 - /* P4/Xeon+ specific */ #define MSR_IA32_MCG_EAX 0x00000180 #define MSR_IA32_MCG_EBX 0x00000181 diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index c9726440993..c86e5ed4af5 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -72,7 +72,6 @@ void lapic_watchdog_stop(void); int lapic_watchdog_init(unsigned nmi_hz); int lapic_wd_event(unsigned nmi_hz); unsigned lapic_adjust_nmi_hz(unsigned hz); -int lapic_watchdog_ok(void); void disable_lapic_nmi_watchdog(void); void enable_lapic_nmi_watchdog(void); void stop_nmi(void); diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 927958d13c1..1ff685ca221 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void); #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) -#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG) +#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG) #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 02ecb30982a..103f1ddb0d8 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -42,6 +42,7 @@ #else /* ...!ASSEMBLY */ +#include <linux/kernel.h> #include <linux/stringify.h> #ifdef CONFIG_SMP @@ -155,6 +156,15 @@ do { \ /* We can use this directly for local CPU (faster). */ DECLARE_PER_CPU(unsigned long, this_cpu_off); +#ifdef CONFIG_NEED_MULTIPLE_NODES +void *pcpu_lpage_remapped(void *kaddr); +#else +static inline void *pcpu_lpage_remapped(void *kaddr) +{ + return NULL; +} +#endif + #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_SMP diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h index 5fb33e160ea..fa64e401589 100644 --- a/arch/x86/include/asm/perf_counter.h +++ b/arch/x86/include/asm/perf_counter.h @@ -87,6 +87,9 @@ union cpuid10_edx { #ifdef CONFIG_PERF_COUNTERS extern void init_hw_perf_counters(void); extern void perf_counters_lapic_init(void); + +#define PERF_COUNTER_INDEX_OFFSET 0 + #else static inline void init_hw_perf_counters(void) { } static inline void perf_counters_lapic_init(void) { } diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h index 49fb3ecf3bb..621f56d7312 100644 --- a/arch/x86/include/asm/proto.h +++ b/arch/x86/include/asm/proto.h @@ -22,7 +22,14 @@ extern int reboot_force; long do_arch_prctl(struct task_struct *task, int code, unsigned long addr); -#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1)) -#define round_down(x, y) ((x) & ~((y) - 1)) +/* + * This looks more complex than it should be. But we need to + * get the type for the ~ right in round_down (it needs to be + * as wide as the result!), and we want to evaluate the macro + * arguments just once each. + */ +#define __round_mask(x,y) ((__typeof__(x))((y)-1)) +#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1) +#define round_down(x,y) ((x) & ~__round_mask(x,y)) #endif /* _ASM_X86_PROTO_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 6c327b852e2..430d5b24af7 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -26,6 +26,8 @@ CFLAGS_tsc.o := $(nostackp) CFLAGS_paravirt.o := $(nostackp) GCOV_PROFILE_vsyscall_64.o := n GCOV_PROFILE_hpet.o := n +GCOV_PROFILE_tsc.o := n +GCOV_PROFILE_paravirt.o := n obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 9372f0406ad..6c99f503780 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1192,7 +1192,7 @@ out: return 0; } -struct notifier_block device_nb = { +static struct notifier_block device_nb = { .notifier_call = device_change_notifier, }; @@ -1763,7 +1763,7 @@ static void *alloc_coherent(struct device *dev, size_t size, flag |= __GFP_ZERO; virt_addr = (void *)__get_free_pages(flag, get_order(size)); if (!virt_addr) - return 0; + return NULL; paddr = virt_to_phys(virt_addr); diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 10b2accd12e..c1b17e97252 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -472,6 +472,8 @@ static u8 * __init alloc_event_buffer(struct amd_iommu *iommu) if (iommu->evt_buf == NULL) return NULL; + iommu->evt_buf_size = EVT_BUFFER_SIZE; + return iommu->evt_buf; } @@ -691,6 +693,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, devid = e->devid; devid_to = e->ext >> 8; + set_dev_entry_from_acpi(iommu, devid , e->flags, 0); set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0); amd_iommu_alias_table[devid] = devid_to; break; @@ -749,11 +752,13 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, devid = e->devid; for (dev_i = devid_start; dev_i <= devid; ++dev_i) { - if (alias) + if (alias) { amd_iommu_alias_table[dev_i] = devid_to; - set_dev_entry_from_acpi(iommu, - amd_iommu_alias_table[dev_i], - flags, ext_flags); + set_dev_entry_from_acpi(iommu, + devid_to, flags, ext_flags); + } + set_dev_entry_from_acpi(iommu, dev_i, + flags, ext_flags); } break; default: diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 8c7c042ecad..0a1c2830ec6 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -140,7 +140,6 @@ int x2apic_mode; #ifdef CONFIG_X86_X2APIC /* x2apic enabled before OS handover */ static int x2apic_preenabled; -static int disable_x2apic; static __init int setup_nox2apic(char *str) { if (x2apic_enabled()) { @@ -149,7 +148,6 @@ static __init int setup_nox2apic(char *str) return 0; } - disable_x2apic = 1; setup_clear_cpu_cap(X86_FEATURE_X2APIC); return 0; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 4d0216fcb36..90b5e6efa93 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1716,25 +1716,19 @@ __apicdebuginit(void) print_IO_APIC(void) return; } -__apicdebuginit(void) print_APIC_bitfield(int base) +__apicdebuginit(void) print_APIC_field(int base) { - unsigned int v; - int i, j; + int i; if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); - for (i = 0; i < 8; i++) { - v = apic_read(base + i*0x10); - for (j = 0; j < 32; j++) { - if (v & (1<<j)) - printk("1"); - else - printk("0"); - } - printk("\n"); - } + printk(KERN_DEBUG); + + for (i = 0; i < 8; i++) + printk(KERN_CONT "%08x", apic_read(base + i*0x10)); + + printk(KERN_CONT "\n"); } __apicdebuginit(void) print_local_APIC(void *dummy) @@ -1745,7 +1739,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy) if (apic_verbosity == APIC_QUIET) return; - printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", + printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); @@ -1786,11 +1780,11 @@ __apicdebuginit(void) print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); printk(KERN_DEBUG "... APIC ISR field:\n"); - print_APIC_bitfield(APIC_ISR); + print_APIC_field(APIC_ISR); printk(KERN_DEBUG "... APIC TMR field:\n"); - print_APIC_bitfield(APIC_TMR); + print_APIC_field(APIC_TMR); printk(KERN_DEBUG "... APIC IRR field:\n"); - print_APIC_bitfield(APIC_IRR); + print_APIC_field(APIC_IRR); if (APIC_INTEGRATED(ver)) { /* !82489DX */ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index e5b27d8f1b4..28e5f595604 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_HT unsigned bits; + int cpu = smp_processor_id(); bits = c->x86_coreid_bits; - /* Low order bits define the core id (index of core in socket) */ c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); /* Convert the initial APIC ID into the socket ID */ c->phys_proc_id = c->initial_apicid >> bits; + /* use socket ID also for last level cache */ + per_cpu(cpu_llc_id, cpu) = c->phys_proc_id; #endif } diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 6b26d4deada..f1961c07af9 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) numa_add_cpu(smp_processor_id()); #endif - - /* Cap the iomem address space to what is addressable on all CPUs */ - iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1; } #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 81cbe64ed6b..2a50ef89100 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -299,7 +299,7 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate) static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) { - if (core_voltage_pre_transition(data, reqvid)) + if (core_voltage_pre_transition(data, reqvid, reqfid)) return 1; if (core_frequency_transition(data, reqfid)) @@ -327,17 +327,20 @@ static int transition_fid_vid(struct powernow_k8_data *data, /* Phase 1 - core voltage transition ... setup voltage */ static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid) + u32 reqvid, u32 reqfid) { u32 rvosteps = data->rvo; u32 savefid = data->currfid; - u32 maxvid, lo; + u32 maxvid, lo, rvomult = 1; dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " "reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); + if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) + rvomult = 2; + rvosteps *= rvomult; rdmsr(MSR_FIDVID_STATUS, lo, maxvid); maxvid = 0x1f & (maxvid >> 16); dprintk("ph1 maxvid=0x%x\n", maxvid); @@ -351,7 +354,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, return 1; } - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + while ((rvosteps > 0) && + ((rvomult * data->rvo + data->currvid) > reqvid)) { if (data->currvid == maxvid) { rvosteps = 0; } else { @@ -384,13 +388,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) u32 vcoreqfid, vcocurrfid, vcofiddiff; u32 fid_interval, savevid = data->currvid; - if ((reqfid < HI_FID_TABLE_BOTTOM) && - (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX "ph2: illegal lo-lo transition " - "0x%x 0x%x\n", reqfid, data->currfid); - return 1; - } - if (data->currfid == reqfid) { printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); @@ -407,6 +404,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid : vcoreqfid - vcocurrfid; + if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) + vcofiddiff = 0; + while (vcofiddiff > 2) { (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); @@ -1081,14 +1081,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, return 0; } - if ((fid < HI_FID_TABLE_BOTTOM) && - (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX - "ignoring illegal change in lo freq table-%x to 0x%x\n", - data->currfid, fid); - return 1; - } - dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", smp_processor_id(), fid, vid); freqs.old = find_khz_freq_from_fid(data->currfid); @@ -1267,7 +1259,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { static const char ACPI_PSS_BIOS_BUG_MSG[] = KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; + FW_BUG PFX "Try again with latest BIOS.\n"; struct powernow_k8_data *data; struct init_on_cpu init_on_cpu; int rc; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index c9c1190b5e1..02ce824073c 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -215,7 +215,8 @@ struct pst_s { #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid); +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid, u32 regfid); static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 284d1de968b..484c1e5f658 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -194,14 +194,14 @@ static void print_mce(struct mce *m) m->cs, m->ip); if (m->cs == __KERNEL_CS) print_symbol("{%s}", m->ip); - printk("\n"); + printk(KERN_CONT "\n"); } printk(KERN_EMERG "TSC %llx ", m->tsc); if (m->addr) - printk("ADDR %llx ", m->addr); + printk(KERN_CONT "ADDR %llx ", m->addr); if (m->misc) - printk("MISC %llx ", m->misc); - printk("\n"); + printk(KERN_CONT "MISC %llx ", m->misc); + printk(KERN_CONT "\n"); printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid); @@ -209,13 +209,13 @@ static void print_mce(struct mce *m) static void print_mce_head(void) { - printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n"); + printk(KERN_EMERG "\nHARDWARE ERROR\n"); } static void print_mce_tail(void) { printk(KERN_EMERG "This is not a software problem!\n" - KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n"); + "Run through mcelog --ascii to decode and contact your hardware vendor\n"); } #define PANIC_TIMEOUT 5 /* 5 seconds */ @@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data) *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); t->expires = jiffies + *n; - add_timer(t); + add_timer_on(t, smp_processor_id()); } static void mce_do_trigger(struct work_struct *work) @@ -1321,7 +1321,7 @@ static void mce_init_timer(void) return; setup_timer(t, mcheck_timer, smp_processor_id()); t->expires = round_jiffies(jiffies + *n); - add_timer(t); + add_timer_on(t, smp_processor_id()); } /* diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 76dfef23f78..d4cf4ce19aa 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -401,7 +401,7 @@ static const u64 amd_hw_cache_event_ids [ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */ }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */ + [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */ [ C(RESULT_MISS) ] = 0, }, [ C(OP_PREFETCH) ] = { @@ -912,6 +912,8 @@ x86_perf_counter_set_period(struct perf_counter *counter, err = checking_wrmsrl(hwc->counter_base + idx, (u64)(-left) & x86_pmu.counter_mask); + perf_counter_update_userpage(counter); + return ret; } @@ -969,13 +971,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc) if (!x86_pmu.num_counters_fixed) return -1; - /* - * Quirk, IA32_FIXED_CTRs do not work on current Atom processors: - */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && - boot_cpu_data.x86_model == 28) - return -1; - event = hwc->config & ARCH_PERFMON_EVENT_MASK; if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS))) @@ -1041,6 +1036,8 @@ try_generic: x86_perf_counter_set_period(counter, hwc, idx); x86_pmu.enable(hwc, idx); + perf_counter_update_userpage(counter); + return 0; } @@ -1133,6 +1130,8 @@ static void x86_pmu_disable(struct perf_counter *counter) x86_perf_counter_update(counter, hwc, idx); cpuc->counters[idx] = NULL; clear_bit(idx, cpuc->used_mask); + + perf_counter_update_userpage(counter); } /* @@ -1428,8 +1427,6 @@ static int intel_pmu_init(void) */ x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3); - rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl); - /* * Install the hw-cache-events table: */ @@ -1499,21 +1496,22 @@ void __init init_hw_perf_counters(void) pr_cont("%s PMU driver.\n", x86_pmu.name); if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) { - x86_pmu.num_counters = X86_PMC_MAX_GENERIC; WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!", x86_pmu.num_counters, X86_PMC_MAX_GENERIC); + x86_pmu.num_counters = X86_PMC_MAX_GENERIC; } perf_counter_mask = (1 << x86_pmu.num_counters) - 1; perf_max_counters = x86_pmu.num_counters; if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) { - x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED; WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!", x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED); + x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED; } perf_counter_mask |= ((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED; + x86_pmu.intel_ctrl = perf_counter_mask; perf_counters_lapic_init(); register_die_notifier(&perf_counter_nmi_notifier); diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index 5c481f6205b..e60ed740d2b 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -803,8 +803,3 @@ int __kprobes lapic_wd_event(unsigned nmi_hz) wd_ops->rearm(wd, nmi_hz); return 1; } - -int lapic_watchdog_ok(void) -{ - return wd_ops != NULL; -} diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 95ea5fa7d44..c8405718a4c 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -22,6 +22,7 @@ #include "dumpstack.h" int panic_on_unrecovered_nmi; +int panic_on_io_nmi; unsigned int code_bytes = 64; int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE; static int die_counter; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 7271fa33d79..5cb5725b2ba 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -627,10 +627,9 @@ __init void e820_setup_gap(void) #ifdef CONFIG_X86_64 if (!found) { gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " - "address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource " - "registers may break!\n"); + printk(KERN_ERR + "PCI: Warning: Cannot find a gap in the 32bit address range\n" + "PCI: Unassigned devices with 32bit resource registers may break!\n"); } #endif @@ -1383,6 +1382,8 @@ static unsigned long ram_alignment(resource_size_t pos) return 32*1024*1024; } +#define MAX_RESOURCE_SIZE ((resource_size_t)-1) + void __init e820_reserve_resources_late(void) { int i; @@ -1400,17 +1401,19 @@ void __init e820_reserve_resources_late(void) * avoid stolen RAM: */ for (i = 0; i < e820.nr_map; i++) { - struct e820entry *entry = &e820_saved.map[i]; - resource_size_t start, end; + struct e820entry *entry = &e820.map[i]; + u64 start, end; if (entry->type != E820_RAM) continue; start = entry->addr + entry->size; - end = round_up(start, ram_alignment(start)); - if (start == end) + end = round_up(start, ram_alignment(start)) - 1; + if (end > MAX_RESOURCE_SIZE) + end = MAX_RESOURCE_SIZE; + if (start >= end) continue; - reserve_region_with_split(&iomem_resource, start, - end - 1, "RAM buffer"); + reserve_region_with_split(&iomem_resource, start, end, + "RAM buffer"); } } diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index a78ecad0c90..c664d515f61 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -200,7 +200,7 @@ static void kvm_leave_lazy_mmu(void) state->mode = paravirt_get_lazy_mode(); } -static void paravirt_ops_setup(void) +static void __init paravirt_ops_setup(void) { pv_info.name = "KVM"; pv_info.paravirt_enabled = 1; diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 47630479b06..1a041bcf506 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -211,11 +211,11 @@ static __init int iommu_setup(char *p) #ifdef CONFIG_SWIOTLB if (!strncmp(p, "soft", 4)) swiotlb = 1; +#endif if (!strncmp(p, "pt", 2)) { iommu_pass_through = 1; return 1; } -#endif gart_parse_options(p); diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index cfd9f906389..d2e56b8f48e 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -675,7 +675,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) nommu: /* Should not happen anymore */ printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n" - KERN_WARNING "falling back to iommu=soft.\n"); + "falling back to iommu=soft.\n"); return -1; } diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index be5ae80f897..de2cab13284 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -289,6 +289,20 @@ void * __init extend_brk(size_t size, size_t align) return ret; } +#ifdef CONFIG_X86_64 +static void __init init_gbpages(void) +{ + if (direct_gbpages && cpu_has_gbpages) + printk(KERN_INFO "Using GB pages for direct mapping\n"); + else + direct_gbpages = 0; +} +#else +static inline void init_gbpages(void) +{ +} +#endif + static void __init reserve_brk(void) { if (_brk_end > _brk_start) @@ -871,6 +885,8 @@ void __init setup_arch(char **cmdline_p) reserve_brk(); + init_gbpages(); + /* max_pfn_mapped is updated here */ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 9c3f0823e6a..29a3eef7cf4 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -124,7 +124,7 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, } /* - * Remap allocator + * Large page remap allocator * * This allocator uses PMD page as unit. A PMD page is allocated for * each cpu and each is remapped into vmalloc area using PMD mapping. @@ -137,105 +137,185 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, * better than only using 4k mappings while still being NUMA friendly. */ #ifdef CONFIG_NEED_MULTIPLE_NODES -static size_t pcpur_size __initdata; -static void **pcpur_ptrs __initdata; +struct pcpul_ent { + unsigned int cpu; + void *ptr; +}; + +static size_t pcpul_size; +static struct pcpul_ent *pcpul_map; +static struct vm_struct pcpul_vm; -static struct page * __init pcpur_get_page(unsigned int cpu, int pageno) +static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) { size_t off = (size_t)pageno << PAGE_SHIFT; - if (off >= pcpur_size) + if (off >= pcpul_size) return NULL; - return virt_to_page(pcpur_ptrs[cpu] + off); + return virt_to_page(pcpul_map[cpu].ptr + off); } -static ssize_t __init setup_pcpu_remap(size_t static_size) +static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) { - static struct vm_struct vm; - size_t ptrs_size, dyn_size; + size_t map_size, dyn_size; unsigned int cpu; + int i, j; ssize_t ret; - /* - * If large page isn't supported, there's no benefit in doing - * this. Also, on non-NUMA, embedding is better. - * - * NOTE: disabled for now. - */ - if (true || !cpu_has_pse || !pcpu_need_numa()) + if (!chosen) { + size_t vm_size = VMALLOC_END - VMALLOC_START; + size_t tot_size = num_possible_cpus() * PMD_SIZE; + + /* on non-NUMA, embedding is better */ + if (!pcpu_need_numa()) + return -EINVAL; + + /* don't consume more than 20% of vmalloc area */ + if (tot_size > vm_size / 5) { + pr_info("PERCPU: too large chunk size %zuMB for " + "large page remap\n", tot_size >> 20); + return -EINVAL; + } + } + + /* need PSE */ + if (!cpu_has_pse) { + pr_warning("PERCPU: lpage allocator requires PSE\n"); return -EINVAL; + } /* * Currently supports only single page. Supporting multiple * pages won't be too difficult if it ever becomes necessary. */ - pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + + pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE); - if (pcpur_size > PMD_SIZE) { + if (pcpul_size > PMD_SIZE) { pr_warning("PERCPU: static data is larger than large page, " "can't use large page\n"); return -EINVAL; } - dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; + dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; /* allocate pointer array and alloc large pages */ - ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0])); - pcpur_ptrs = alloc_bootmem(ptrs_size); + map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0])); + pcpul_map = alloc_bootmem(map_size); for_each_possible_cpu(cpu) { - pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE); - if (!pcpur_ptrs[cpu]) + pcpul_map[cpu].cpu = cpu; + pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE, + PMD_SIZE); + if (!pcpul_map[cpu].ptr) { + pr_warning("PERCPU: failed to allocate large page " + "for cpu%u\n", cpu); goto enomem; + } /* - * Only use pcpur_size bytes and give back the rest. + * Only use pcpul_size bytes and give back the rest. * * Ingo: The 2MB up-rounding bootmem is needed to make * sure the partial 2MB page is still fully RAM - it's * not well-specified to have a PAT-incompatible area * (unmapped RAM, device memory, etc.) in that hole. */ - free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size), - PMD_SIZE - pcpur_size); + free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size), + PMD_SIZE - pcpul_size); - memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size); + memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size); } /* allocate address and map */ - vm.flags = VM_ALLOC; - vm.size = num_possible_cpus() * PMD_SIZE; - vm_area_register_early(&vm, PMD_SIZE); + pcpul_vm.flags = VM_ALLOC; + pcpul_vm.size = num_possible_cpus() * PMD_SIZE; + vm_area_register_early(&pcpul_vm, PMD_SIZE); for_each_possible_cpu(cpu) { - pmd_t *pmd; + pmd_t *pmd, pmd_v; - pmd = populate_extra_pmd((unsigned long)vm.addr - + cpu * PMD_SIZE); - set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])), - PAGE_KERNEL_LARGE)); + pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr + + cpu * PMD_SIZE); + pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)), + PAGE_KERNEL_LARGE); + set_pmd(pmd, pmd_v); } /* we're ready, commit */ pr_info("PERCPU: Remapped at %p with large pages, static data " - "%zu bytes\n", vm.addr, static_size); + "%zu bytes\n", pcpul_vm.addr, static_size); - ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, + ret = pcpu_setup_first_chunk(pcpul_get_page, static_size, PERCPU_FIRST_CHUNK_RESERVE, dyn_size, - PMD_SIZE, vm.addr, NULL); - goto out_free_ar; + PMD_SIZE, pcpul_vm.addr, NULL); + + /* sort pcpul_map array for pcpu_lpage_remapped() */ + for (i = 0; i < num_possible_cpus() - 1; i++) + for (j = i + 1; j < num_possible_cpus(); j++) + if (pcpul_map[i].ptr > pcpul_map[j].ptr) { + struct pcpul_ent tmp = pcpul_map[i]; + pcpul_map[i] = pcpul_map[j]; + pcpul_map[j] = tmp; + } + + return ret; enomem: for_each_possible_cpu(cpu) - if (pcpur_ptrs[cpu]) - free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE); - ret = -ENOMEM; -out_free_ar: - free_bootmem(__pa(pcpur_ptrs), ptrs_size); - return ret; + if (pcpul_map[cpu].ptr) + free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size); + free_bootmem(__pa(pcpul_map), map_size); + return -ENOMEM; +} + +/** + * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area + * @kaddr: the kernel address in question + * + * Determine whether @kaddr falls in the pcpul recycled area. This is + * used by pageattr to detect VM aliases and break up the pcpu PMD + * mapping such that the same physical page is not mapped under + * different attributes. + * + * The recycled area is always at the tail of a partially used PMD + * page. + * + * RETURNS: + * Address of corresponding remapped pcpu address if match is found; + * otherwise, NULL. + */ +void *pcpu_lpage_remapped(void *kaddr) +{ + void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK); + unsigned long offset = (unsigned long)kaddr & ~PMD_MASK; + int left = 0, right = num_possible_cpus() - 1; + int pos; + + /* pcpul in use at all? */ + if (!pcpul_map) + return NULL; + + /* okay, perform binary search */ + while (left <= right) { + pos = (left + right) / 2; + + if (pcpul_map[pos].ptr < pmd_addr) + left = pos + 1; + else if (pcpul_map[pos].ptr > pmd_addr) + right = pos - 1; + else { + /* it shouldn't be in the area for the first chunk */ + WARN_ON(offset < pcpul_size); + + return pcpul_vm.addr + + pcpul_map[pos].cpu * PMD_SIZE + offset; + } + } + + return NULL; } #else -static ssize_t __init setup_pcpu_remap(size_t static_size) +static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) { return -EINVAL; } @@ -249,7 +329,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) * mapping so that it can use PMD mapping without additional TLB * pressure. */ -static ssize_t __init setup_pcpu_embed(size_t static_size) +static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; @@ -258,7 +338,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size) * this. Also, embedding allocation doesn't play well with * NUMA. */ - if (!cpu_has_pse || pcpu_need_numa()) + if (!chosen && (!cpu_has_pse || pcpu_need_numa())) return -EINVAL; return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, @@ -308,8 +388,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size) void *ptr; ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE); - if (!ptr) + if (!ptr) { + pr_warning("PERCPU: failed to allocate " + "4k page for cpu%u\n", cpu); goto enomem; + } memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE); pcpu4k_pages[j++] = virt_to_page(ptr); @@ -333,6 +416,16 @@ out_free_ar: return ret; } +/* for explicit first chunk allocator selection */ +static char pcpu_chosen_alloc[16] __initdata; + +static int __init percpu_alloc_setup(char *str) +{ + strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1); + return 0; +} +early_param("percpu_alloc", percpu_alloc_setup); + static inline void setup_percpu_segment(int cpu) { #ifdef CONFIG_X86_32 @@ -346,11 +439,6 @@ static inline void setup_percpu_segment(int cpu) #endif } -/* - * Great future plan: - * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. - * Always point %gs to its beginning - */ void __init setup_per_cpu_areas(void) { size_t static_size = __per_cpu_end - __per_cpu_start; @@ -367,9 +455,26 @@ void __init setup_per_cpu_areas(void) * of large page mappings. Please read comments on top of * each allocator for details. */ - ret = setup_pcpu_remap(static_size); - if (ret < 0) - ret = setup_pcpu_embed(static_size); + ret = -EINVAL; + if (strlen(pcpu_chosen_alloc)) { + if (strcmp(pcpu_chosen_alloc, "4k")) { + if (!strcmp(pcpu_chosen_alloc, "lpage")) + ret = setup_pcpu_lpage(static_size, true); + else if (!strcmp(pcpu_chosen_alloc, "embed")) + ret = setup_pcpu_embed(static_size, true); + else + pr_warning("PERCPU: unknown allocator %s " + "specified\n", pcpu_chosen_alloc); + if (ret < 0) + pr_warning("PERCPU: %s allocator failed (%zd), " + "falling back to 4k\n", + pcpu_chosen_alloc, ret); + } + } else { + ret = setup_pcpu_lpage(static_size, false); + if (ret < 0) + ret = setup_pcpu_embed(static_size, false); + } if (ret < 0) ret = setup_pcpu_4k(static_size); if (ret < 0) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 124d40c575d..8ccabb8a2f6 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -711,7 +711,6 @@ uv_activation_descriptor_init(int node, int pnode) unsigned long pa; unsigned long m; unsigned long n; - unsigned long mmr_image; struct bau_desc *adp; struct bau_desc *ad2; @@ -727,12 +726,8 @@ uv_activation_descriptor_init(int node, int pnode) n = pa >> uv_nshift; m = pa & uv_mmask; - mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE); - if (mmr_image) { - uv_write_global_mmr64(pnode, (unsigned long) - UVH_LB_BAU_SB_DESCRIPTOR_BASE, - (n << UV_DESC_BASE_PNODE_SHIFT | m)); - } + uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, + (n << UV_DESC_BASE_PNODE_SHIFT | m)); /* * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a0f48f5671c..5204332f475 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -346,6 +346,9 @@ io_check_error(unsigned char reason, struct pt_regs *regs) printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n"); show_registers(regs); + if (panic_on_io_nmi) + panic("NMI IOCK error: Not continuing"); + /* Re-enable the IOCK line, wait for a few seconds */ reason = (reason & 0xf) | 8; outb(reason, 0x61); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 5c3d6e81a7d..7030b5f911b 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2157,7 +2157,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level) else /* 32 bits PSE 4MB page */ context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21); - context->rsvd_bits_mask[1][0] = ~0ull; + context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0]; break; case PT32E_ROOT_LEVEL: context->rsvd_bits_mask[0][2] = @@ -2170,7 +2170,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level) context->rsvd_bits_mask[1][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 62) | rsvd_bits(13, 20); /* large page */ - context->rsvd_bits_mask[1][0] = ~0ull; + context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0]; break; case PT64_ROOT_LEVEL: context->rsvd_bits_mask[0][3] = exb_bit_rsvd | @@ -2186,7 +2186,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level) context->rsvd_bits_mask[1][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 51) | rsvd_bits(13, 20); /* large page */ - context->rsvd_bits_mask[1][0] = ~0ull; + context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0]; break; } } diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 258e4591e1c..67785f63539 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -281,7 +281,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, { unsigned access = gw->pt_access; struct kvm_mmu_page *shadow_page; - u64 spte, *sptep; + u64 spte, *sptep = NULL; int direct; gfn_t table_gfn; int r; diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index e770bf349ec..356a0ce85c6 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3012,6 +3012,12 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) return 1; } +static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) +{ + kvm_queue_exception(vcpu, UD_VECTOR); + return 1; +} + static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) { unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); @@ -3198,6 +3204,15 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu, [EXIT_REASON_HLT] = handle_halt, [EXIT_REASON_INVLPG] = handle_invlpg, [EXIT_REASON_VMCALL] = handle_vmcall, + [EXIT_REASON_VMCLEAR] = handle_vmx_insn, + [EXIT_REASON_VMLAUNCH] = handle_vmx_insn, + [EXIT_REASON_VMPTRLD] = handle_vmx_insn, + [EXIT_REASON_VMPTRST] = handle_vmx_insn, + [EXIT_REASON_VMREAD] = handle_vmx_insn, + [EXIT_REASON_VMRESUME] = handle_vmx_insn, + [EXIT_REASON_VMWRITE] = handle_vmx_insn, + [EXIT_REASON_VMOFF] = handle_vmx_insn, + [EXIT_REASON_VMON] = handle_vmx_insn, [EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold, [EXIT_REASON_APIC_ACCESS] = handle_apic_access, [EXIT_REASON_WBINVD] = handle_wbinvd, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 249540f9851..fe5474aec41 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -898,6 +898,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_VM_HSAVE_PA: case MSR_P6_EVNTSEL0: case MSR_P6_EVNTSEL1: + case MSR_K7_EVNTSEL0: data = 0; break; case MSR_MTRRcap: diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c index c1b6c232e02..616de4628d6 100644 --- a/arch/x86/kvm/x86_emulate.c +++ b/arch/x86/kvm/x86_emulate.c @@ -1361,7 +1361,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt, return 0; } -void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask) +static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask) { u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask); /* diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index 9a10a78bb4a..ebeafcce04a 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -5,15 +5,14 @@ * Zero a page. * rdi page */ - ALIGN -clear_page_c: +ENTRY(clear_page_c) CFI_STARTPROC movl $4096/8,%ecx xorl %eax,%eax rep stosq ret CFI_ENDPROC -ENDPROC(clear_page) +ENDPROC(clear_page_c) ENTRY(clear_page) CFI_STARTPROC diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index f118c110af3..6ba0f7bb85e 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -75,6 +75,7 @@ ENTRY(copy_to_user) jae bad_to_user ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string CFI_ENDPROC +ENDPROC(copy_to_user) /* Standard copy_from_user with segment limit checking */ ENTRY(copy_from_user) diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c index f4568605d7d..ff485d36118 100644 --- a/arch/x86/lib/delay.c +++ b/arch/x86/lib/delay.c @@ -55,8 +55,10 @@ static void delay_tsc(unsigned long loops) preempt_disable(); cpu = smp_processor_id(); + rdtsc_barrier(); rdtscl(bclock); for (;;) { + rdtsc_barrier(); rdtscl(now); if ((now - bclock) >= loops) break; @@ -78,6 +80,7 @@ static void delay_tsc(unsigned long loops) if (unlikely(cpu != smp_processor_id())) { loops -= (now - bclock); cpu = smp_processor_id(); + rdtsc_barrier(); rdtscl(bclock); } } diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 78a5fff857b..85307cc6e45 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -426,10 +426,11 @@ static noinline int vmalloc_fault(unsigned long address) } static const char errata93_warning[] = -KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n" -KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n" -KERN_ERR "******* Please consider a BIOS update.\n" -KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n"; +KERN_ERR +"******* Your BIOS seems to not contain a fix for K8 errata #93\n" +"******* Working around it, but it may cause SEGVs or burn power.\n" +"******* Please consider a BIOS update.\n" +"******* Disabling USB legacy in the BIOS may also help.\n"; /* * No vm86 mode in 64-bit mode: diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index f53b57e4086..0607119cef9 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -12,6 +12,7 @@ #include <asm/system.h> #include <asm/tlbflush.h> #include <asm/tlb.h> +#include <asm/proto.h> DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -177,20 +178,6 @@ static int __meminit save_mr(struct map_range *mr, int nr_range, return nr_range; } -#ifdef CONFIG_X86_64 -static void __init init_gbpages(void) -{ - if (direct_gbpages && cpu_has_gbpages) - printk(KERN_INFO "Using GB pages for direct mapping\n"); - else - direct_gbpages = 0; -} -#else -static inline void init_gbpages(void) -{ -} -#endif - /* * Setup the direct mapping of the physical memory at PAGE_OFFSET. * This runs before bootmem is initialized and gets pages directly from @@ -210,9 +197,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end); - if (!after_bootmem) - init_gbpages(); - #if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK) /* * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages. diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index c4378f4fd4a..6176fe8f29e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -598,6 +598,15 @@ void __init paging_init(void) sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); + + /* + * clear the default setting with node 0 + * note: don't use nodes_clear here, that is really clearing when + * numa support is not compiled in, and later node_set_state + * will not set it back. + */ + node_clear_state(0, N_NORMAL_MEMORY); + free_area_init_nodes(max_zone_pfns); } diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 3cfe9ced8a4..1b734d7a896 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -11,6 +11,7 @@ #include <linux/interrupt.h> #include <linux/seq_file.h> #include <linux/debugfs.h> +#include <linux/pfn.h> #include <asm/e820.h> #include <asm/processor.h> @@ -681,8 +682,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias); static int cpa_process_alias(struct cpa_data *cpa) { struct cpa_data alias_cpa; - int ret = 0; - unsigned long temp_cpa_vaddr, vaddr; + unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT); + unsigned long vaddr, remapped; + int ret; if (cpa->pfn >= max_pfn_mapped) return 0; @@ -706,42 +708,55 @@ static int cpa_process_alias(struct cpa_data *cpa) PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) { alias_cpa = *cpa; - temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT); - alias_cpa.vaddr = &temp_cpa_vaddr; + alias_cpa.vaddr = &laddr; alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); - ret = __change_page_attr_set_clr(&alias_cpa, 0); + if (ret) + return ret; } #ifdef CONFIG_X86_64 - if (ret) - return ret; /* - * No need to redo, when the primary call touched the high - * mapping already: - */ - if (within(vaddr, (unsigned long) _text, _brk_end)) - return 0; - - /* - * If the physical address is inside the kernel map, we need + * If the primary call didn't touch the high mapping already + * and the physical address is inside the kernel map, we need * to touch the high mapped kernel as well: */ - if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) - return 0; + if (!within(vaddr, (unsigned long)_text, _brk_end) && + within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) { + unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + + __START_KERNEL_map - phys_base; + alias_cpa = *cpa; + alias_cpa.vaddr = &temp_cpa_vaddr; + alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); - alias_cpa = *cpa; - temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base; - alias_cpa.vaddr = &temp_cpa_vaddr; - alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); + /* + * The high mapping range is imprecise, so ignore the + * return value. + */ + __change_page_attr_set_clr(&alias_cpa, 0); + } +#endif /* - * The high mapping range is imprecise, so ignore the return value. + * If the PMD page was partially used for per-cpu remapping, + * the recycled area needs to be split and modified. Because + * the area is always proper subset of a PMD page + * cpa->numpages is guaranteed to be 1 for these areas, so + * there's no need to loop over and check for further remaps. */ - __change_page_attr_set_clr(&alias_cpa, 0); -#endif - return ret; + remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr); + if (remapped) { + WARN_ON(cpa->numpages > 1); + alias_cpa = *cpa; + alias_cpa.vaddr = &remapped; + alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); + ret = __change_page_attr_set_clr(&alias_cpa, 0); + if (ret) + return ret; + } + + return 0; } static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index b26626dc517..1014eb4bfc3 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -68,6 +68,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data) unsigned long flags; struct resource *root; int max_root_bus_resources = PCI_BUS_NUM_RESOURCES; + u64 start, end; + + if (bus_has_transparent_bridge(info->bus)) + max_root_bus_resources -= 3; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -84,25 +88,24 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } else return AE_OK; - res = &info->res[info->res_num]; - res->name = info->name; - res->flags = flags; - res->start = addr.minimum + addr.translation_offset; - res->end = res->start + addr.address_length - 1; - res->child = NULL; - - if (bus_has_transparent_bridge(info->bus)) - max_root_bus_resources -= 3; + start = addr.minimum + addr.translation_offset; + end = start + addr.address_length - 1; if (info->res_num >= max_root_bus_resources) { printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx " "from %s for %s due to _CRS returning more than " - "%d resource descriptors\n", (unsigned long) res->start, - (unsigned long) res->end, root->name, info->name, + "%d resource descriptors\n", (unsigned long) start, + (unsigned long) end, root->name, info->name, max_root_bus_resources); - info->res_num++; return AE_OK; } + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = start; + res->end = end; + res->child = NULL; + if (insert_resource(root, res)) { printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " "from %s for %s\n", (unsigned long) res->start, @@ -115,23 +118,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } static void -adjust_transparent_bridge_resources(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - int i; - u16 class = dev->class >> 8; - - if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) { - for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) - dev->subordinate->resource[i] = - dev->bus->resource[i - 3]; - } - } -} - -static void get_current_resources(struct acpi_device *device, int busnum, int domain, struct pci_bus *bus) { @@ -158,8 +144,6 @@ get_current_resources(struct acpi_device *device, int busnum, info.res_num = 0; acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, &info); - if (info.res_num) - adjust_transparent_bridge_resources(bus); return; @@ -222,8 +206,15 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do */ memcpy(bus->sysdata, sd, sizeof(*sd)); kfree(sd); - } else - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + } else { + bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd); + if (bus) { + if (pci_probe & PCI_USE__CRS) + get_current_resources(device, busnum, domain, + bus); + bus->subordinate = pci_scan_child_bus(bus); + } + } if (!bus) kfree(sd); @@ -238,8 +229,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif } - if (bus && (pci_probe & PCI_USE__CRS)) - get_current_resources(device, busnum, domain, bus); return bus; } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index f893d6a6e80..3ffa10df20b 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -100,8 +100,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) int j; struct pci_root_info *info; - /* don't go for it if _CRS is used */ - if (pci_probe & PCI_USE__CRS) + /* don't go for it if _CRS is used already */ + if (b->resource[0] != &ioport_resource || + b->resource[1] != &iomem_resource) return; /* if only one root bus, don't need to anything */ @@ -116,6 +117,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) if (i == pci_root_num) return; + printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", + b->number); + info = &pci_root_info[i]; for (j = 0; j < info->res_num; j++) { struct resource *res; diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile index de2abbd0754..a6a198c3362 100644 --- a/arch/x86/power/Makefile +++ b/arch/x86/power/Makefile @@ -1,7 +1,7 @@ # __restore_processor_state() restores %gs after S3 resume and so should not # itself be stack-protected nostackp := $(call cc-option, -fno-stack-protector) -CFLAGS_cpu_$(BITS).o := $(nostackp) +CFLAGS_cpu.o := $(nostackp) obj-$(CONFIG_PM_SLEEP) += cpu.o obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index d277ef1eea5..b3d20b9cac6 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -244,7 +244,7 @@ static void __restore_processor_state(struct saved_context *ctxt) do_fpu_end(); mtrr_ap_init(); -#ifdef CONFIG_X86_32 +#ifdef CONFIG_X86_OLD_MCE mcheck_init(&boot_cpu_data); #endif } diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index ba9ab934978..e64efac3b9d 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -354,10 +354,10 @@ void show_regs(struct pt_regs * regs) for (i = 0; i < 16; i++) { if ((i % 8) == 0) - printk ("\n" KERN_INFO "a%02d: ", i); - printk("%08lx ", regs->areg[i]); + printk(KERN_INFO "a%02d:", i); + printk(KERN_CONT " %08lx", regs->areg[i]); } - printk("\n"); + printk(KERN_CONT "\n"); printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n", regs->pc, regs->ps, regs->depc, regs->excvaddr); diff --git a/block/Makefile b/block/Makefile index e9fa4dd690f..6c54ed0ff75 100644 --- a/block/Makefile +++ b/block/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \ blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \ blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \ - ioctl.o genhd.o scsi_ioctl.o cmd-filter.o + ioctl.o genhd.o scsi_ioctl.o obj-$(CONFIG_BLK_DEV_BSG) += bsg.o obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o diff --git a/block/blk-core.c b/block/blk-core.c index b06cf5c2a82..4b45435c6ea 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -595,8 +595,6 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) q->sg_reserved_size = INT_MAX; - blk_set_cmd_filter_defaults(&q->cmd_filter); - /* * all done */ @@ -1172,6 +1170,11 @@ static int __make_request(struct request_queue *q, struct bio *bio) const int unplug = bio_unplug(bio); int rw_flags; + if (bio_barrier(bio) && bio_has_data(bio) && + (q->next_ordered == QUEUE_ORDERED_NONE)) { + bio_endio(bio, -EOPNOTSUPP); + return 0; + } /* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even @@ -1472,11 +1475,6 @@ static inline void __generic_make_request(struct bio *bio) err = -EOPNOTSUPP; goto end_io; } - if (bio_barrier(bio) && bio_has_data(bio) && - (q->next_ordered == QUEUE_ORDERED_NONE)) { - err = -EOPNOTSUPP; - goto end_io; - } ret = q->make_request_fn(q, bio); } while (ret); @@ -2365,7 +2363,7 @@ int blk_rq_prep_clone(struct request *rq, struct request *rq_src, __bio_clone(bio, bio_src); if (bio_integrity(bio_src) && - bio_integrity_clone(bio, bio_src, gfp_mask)) + bio_integrity_clone(bio, bio_src, gfp_mask, bs)) goto free_and_out; if (bio_ctr && bio_ctr(bio, bio_src, data)) diff --git a/block/blk-merge.c b/block/blk-merge.c index 39ce64432ba..e1999679a4d 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -350,6 +350,12 @@ static int attempt_merge(struct request_queue *q, struct request *req, if (blk_integrity_rq(req) != blk_integrity_rq(next)) return 0; + /* don't merge requests of different failfast settings */ + if (blk_failfast_dev(req) != blk_failfast_dev(next) || + blk_failfast_transport(req) != blk_failfast_transport(next) || + blk_failfast_driver(req) != blk_failfast_driver(next)) + return 0; + /* * If we are allowed to merge, then append bio list * from next to rq and release next. merge_requests_fn diff --git a/block/bsg.c b/block/bsg.c index e7d47525424..5f184bb3ff9 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -186,7 +186,7 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq, return -EFAULT; if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) { - if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm)) + if (blk_verify_command(rq->cmd, has_write_perm)) return -EPERM; } else if (!capable(CAP_SYS_RAWIO)) return -EPERM; diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 833ec18eaa6..87276eb83f7 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -71,6 +71,51 @@ struct cfq_rb_root { #define CFQ_RB_ROOT (struct cfq_rb_root) { RB_ROOT, NULL, } /* + * Per process-grouping structure + */ +struct cfq_queue { + /* reference count */ + atomic_t ref; + /* various state flags, see below */ + unsigned int flags; + /* parent cfq_data */ + struct cfq_data *cfqd; + /* service_tree member */ + struct rb_node rb_node; + /* service_tree key */ + unsigned long rb_key; + /* prio tree member */ + struct rb_node p_node; + /* prio tree root we belong to, if any */ + struct rb_root *p_root; + /* sorted list of pending requests */ + struct rb_root sort_list; + /* if fifo isn't expired, next request to serve */ + struct request *next_rq; + /* requests queued in sort_list */ + int queued[2]; + /* currently allocated requests */ + int allocated[2]; + /* fifo list of requests in sort_list */ + struct list_head fifo; + + unsigned long slice_end; + long slice_resid; + unsigned int slice_dispatch; + + /* pending metadata requests */ + int meta_pending; + /* number of requests that are on the dispatch list or inside driver */ + int dispatched; + + /* io prio of this group */ + unsigned short ioprio, org_ioprio; + unsigned short ioprio_class, org_ioprio_class; + + pid_t pid; +}; + +/* * Per block device queue structure */ struct cfq_data { @@ -135,51 +180,11 @@ struct cfq_data { unsigned int cfq_slice_idle; struct list_head cic_list; -}; - -/* - * Per process-grouping structure - */ -struct cfq_queue { - /* reference count */ - atomic_t ref; - /* various state flags, see below */ - unsigned int flags; - /* parent cfq_data */ - struct cfq_data *cfqd; - /* service_tree member */ - struct rb_node rb_node; - /* service_tree key */ - unsigned long rb_key; - /* prio tree member */ - struct rb_node p_node; - /* prio tree root we belong to, if any */ - struct rb_root *p_root; - /* sorted list of pending requests */ - struct rb_root sort_list; - /* if fifo isn't expired, next request to serve */ - struct request *next_rq; - /* requests queued in sort_list */ - int queued[2]; - /* currently allocated requests */ - int allocated[2]; - /* fifo list of requests in sort_list */ - struct list_head fifo; - unsigned long slice_end; - long slice_resid; - unsigned int slice_dispatch; - - /* pending metadata requests */ - int meta_pending; - /* number of requests that are on the dispatch list or inside driver */ - int dispatched; - - /* io prio of this group */ - unsigned short ioprio, org_ioprio; - unsigned short ioprio_class, org_ioprio_class; - - pid_t pid; + /* + * Fallback dummy cfqq for extreme OOM conditions + */ + struct cfq_queue oom_cfqq; }; enum cfqq_state_flags { @@ -1641,6 +1646,26 @@ static void cfq_ioc_set_ioprio(struct io_context *ioc) ioc->ioprio_changed = 0; } +static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq, + pid_t pid, int is_sync) +{ + RB_CLEAR_NODE(&cfqq->rb_node); + RB_CLEAR_NODE(&cfqq->p_node); + INIT_LIST_HEAD(&cfqq->fifo); + + atomic_set(&cfqq->ref, 0); + cfqq->cfqd = cfqd; + + cfq_mark_cfqq_prio_changed(cfqq); + + if (is_sync) { + if (!cfq_class_idle(cfqq)) + cfq_mark_cfqq_idle_window(cfqq); + cfq_mark_cfqq_sync(cfqq); + } + cfqq->pid = pid; +} + static struct cfq_queue * cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc, gfp_t gfp_mask) @@ -1653,56 +1678,40 @@ retry: /* cic always exists here */ cfqq = cic_to_cfqq(cic, is_sync); - if (!cfqq) { + /* + * Always try a new alloc if we fell back to the OOM cfqq + * originally, since it should just be a temporary situation. + */ + if (!cfqq || cfqq == &cfqd->oom_cfqq) { + cfqq = NULL; if (new_cfqq) { cfqq = new_cfqq; new_cfqq = NULL; } else if (gfp_mask & __GFP_WAIT) { - /* - * Inform the allocator of the fact that we will - * just repeat this allocation if it fails, to allow - * the allocator to do whatever it needs to attempt to - * free memory. - */ spin_unlock_irq(cfqd->queue->queue_lock); new_cfqq = kmem_cache_alloc_node(cfq_pool, - gfp_mask | __GFP_NOFAIL | __GFP_ZERO, + gfp_mask | __GFP_ZERO, cfqd->queue->node); spin_lock_irq(cfqd->queue->queue_lock); - goto retry; + if (new_cfqq) + goto retry; } else { cfqq = kmem_cache_alloc_node(cfq_pool, gfp_mask | __GFP_ZERO, cfqd->queue->node); - if (!cfqq) - goto out; } - RB_CLEAR_NODE(&cfqq->rb_node); - RB_CLEAR_NODE(&cfqq->p_node); - INIT_LIST_HEAD(&cfqq->fifo); - - atomic_set(&cfqq->ref, 0); - cfqq->cfqd = cfqd; - - cfq_mark_cfqq_prio_changed(cfqq); - - cfq_init_prio_data(cfqq, ioc); - - if (is_sync) { - if (!cfq_class_idle(cfqq)) - cfq_mark_cfqq_idle_window(cfqq); - cfq_mark_cfqq_sync(cfqq); - } - cfqq->pid = current->pid; - cfq_log_cfqq(cfqd, cfqq, "alloced"); + if (cfqq) { + cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync); + cfq_init_prio_data(cfqq, ioc); + cfq_log_cfqq(cfqd, cfqq, "alloced"); + } else + cfqq = &cfqd->oom_cfqq; } if (new_cfqq) kmem_cache_free(cfq_pool, new_cfqq); -out: - WARN_ON((gfp_mask & __GFP_WAIT) && !cfqq); return cfqq; } @@ -1735,11 +1744,8 @@ cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc, cfqq = *async_cfqq; } - if (!cfqq) { + if (!cfqq) cfqq = cfq_find_alloc_queue(cfqd, is_sync, ioc, gfp_mask); - if (!cfqq) - return NULL; - } /* * pin the queue now that it's allocated, scheduler exit will prune it @@ -2307,10 +2313,6 @@ cfq_set_request(struct request_queue *q, struct request *rq, gfp_t gfp_mask) cfqq = cic_to_cfqq(cic, is_sync); if (!cfqq) { cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask); - - if (!cfqq) - goto queue_fail; - cic_set_cfqq(cic, cfqq, is_sync); } @@ -2465,6 +2467,14 @@ static void *cfq_init_queue(struct request_queue *q) for (i = 0; i < CFQ_PRIO_LISTS; i++) cfqd->prio_trees[i] = RB_ROOT; + /* + * Our fallback cfqq if cfq_find_alloc_queue() runs into OOM issues. + * Grab a permanent reference to it, so that the normal code flow + * will not attempt to free it. + */ + cfq_init_cfqq(cfqd, &cfqd->oom_cfqq, 1, 0); + atomic_inc(&cfqd->oom_cfqq.ref); + INIT_LIST_HEAD(&cfqd->cic_list); cfqd->queue = q; diff --git a/block/cmd-filter.c b/block/cmd-filter.c deleted file mode 100644 index 572bbc2f900..00000000000 --- a/block/cmd-filter.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2004 Peter M. Jones <pjones@redhat.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public Licens - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111- - * - */ - -#include <linux/list.h> -#include <linux/genhd.h> -#include <linux/spinlock.h> -#include <linux/capability.h> -#include <linux/bitops.h> -#include <linux/blkdev.h> - -#include <scsi/scsi.h> -#include <linux/cdrom.h> - -int blk_verify_command(struct blk_cmd_filter *filter, - unsigned char *cmd, fmode_t has_write_perm) -{ - /* root can do any command. */ - if (capable(CAP_SYS_RAWIO)) - return 0; - - /* if there's no filter set, assume we're filtering everything out */ - if (!filter) - return -EPERM; - - /* Anybody who can open the device can do a read-safe command */ - if (test_bit(cmd[0], filter->read_ok)) - return 0; - - /* Write-safe commands require a writable open */ - if (test_bit(cmd[0], filter->write_ok) && has_write_perm) - return 0; - - return -EPERM; -} -EXPORT_SYMBOL(blk_verify_command); - -#if 0 -/* and now, the sysfs stuff */ -static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page, - int rw) -{ - char *npage = page; - unsigned long *okbits; - int i; - - if (rw == READ) - okbits = filter->read_ok; - else - okbits = filter->write_ok; - - for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) { - if (test_bit(i, okbits)) { - npage += sprintf(npage, "0x%02x", i); - if (i < BLK_SCSI_MAX_CMDS - 1) - sprintf(npage++, " "); - } - } - - if (npage != page) - npage += sprintf(npage, "\n"); - - return npage - page; -} - -static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page) -{ - return rcf_cmds_show(filter, page, READ); -} - -static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter, - char *page) -{ - return rcf_cmds_show(filter, page, WRITE); -} - -static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter, - const char *page, size_t count, int rw) -{ - unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits; - int cmd, set; - char *p, *status; - - if (rw == READ) { - memcpy(&okbits, filter->read_ok, sizeof(okbits)); - target_okbits = filter->read_ok; - } else { - memcpy(&okbits, filter->write_ok, sizeof(okbits)); - target_okbits = filter->write_ok; - } - - while ((p = strsep((char **)&page, " ")) != NULL) { - set = 1; - - if (p[0] == '+') { - p++; - } else if (p[0] == '-') { - set = 0; - p++; - } - - cmd = simple_strtol(p, &status, 16); - - /* either of these cases means invalid input, so do nothing. */ - if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS) - return -EINVAL; - - if (set) - __set_bit(cmd, okbits); - else - __clear_bit(cmd, okbits); - } - - memcpy(target_okbits, okbits, sizeof(okbits)); - return count; -} - -static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter, - const char *page, size_t count) -{ - return rcf_cmds_store(filter, page, count, READ); -} - -static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter, - const char *page, size_t count) -{ - return rcf_cmds_store(filter, page, count, WRITE); -} - -struct rcf_sysfs_entry { - struct attribute attr; - ssize_t (*show)(struct blk_cmd_filter *, char *); - ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t); -}; - -static struct rcf_sysfs_entry rcf_readcmds_entry = { - .attr = { .name = "read_table", .mode = S_IRUGO | S_IWUSR }, - .show = rcf_readcmds_show, - .store = rcf_readcmds_store, -}; - -static struct rcf_sysfs_entry rcf_writecmds_entry = { - .attr = {.name = "write_table", .mode = S_IRUGO | S_IWUSR }, - .show = rcf_writecmds_show, - .store = rcf_writecmds_store, -}; - -static struct attribute *default_attrs[] = { - &rcf_readcmds_entry.attr, - &rcf_writecmds_entry.attr, - NULL, -}; - -#define to_rcf(atr) container_of((atr), struct rcf_sysfs_entry, attr) - -static ssize_t -rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page) -{ - struct rcf_sysfs_entry *entry = to_rcf(attr); - struct blk_cmd_filter *filter; - - filter = container_of(kobj, struct blk_cmd_filter, kobj); - if (entry->show) - return entry->show(filter, page); - - return 0; -} - -static ssize_t -rcf_attr_store(struct kobject *kobj, struct attribute *attr, - const char *page, size_t length) -{ - struct rcf_sysfs_entry *entry = to_rcf(attr); - struct blk_cmd_filter *filter; - - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - - if (!entry->store) - return -EINVAL; - - filter = container_of(kobj, struct blk_cmd_filter, kobj); - return entry->store(filter, page, length); -} - -static struct sysfs_ops rcf_sysfs_ops = { - .show = rcf_attr_show, - .store = rcf_attr_store, -}; - -static struct kobj_type rcf_ktype = { - .sysfs_ops = &rcf_sysfs_ops, - .default_attrs = default_attrs, -}; - -int blk_register_filter(struct gendisk *disk) -{ - int ret; - struct blk_cmd_filter *filter = &disk->queue->cmd_filter; - - ret = kobject_init_and_add(&filter->kobj, &rcf_ktype, - &disk_to_dev(disk)->kobj, - "%s", "cmd_filter"); - if (ret < 0) - return ret; - - return 0; -} -EXPORT_SYMBOL(blk_register_filter); - -void blk_unregister_filter(struct gendisk *disk) -{ - struct blk_cmd_filter *filter = &disk->queue->cmd_filter; - - kobject_put(&filter->kobj); -} -EXPORT_SYMBOL(blk_unregister_filter); -#endif diff --git a/block/elevator.c b/block/elevator.c index ca861927ba4..6f2375339a9 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -100,6 +100,14 @@ int elv_rq_merge_ok(struct request *rq, struct bio *bio) if (bio_integrity(bio) != blk_integrity_rq(rq)) return 0; + /* + * Don't merge if failfast settings don't match + */ + if (bio_failfast_dev(bio) != blk_failfast_dev(rq) || + bio_failfast_transport(bio) != blk_failfast_transport(rq) || + bio_failfast_driver(bio) != blk_failfast_driver(rq)) + return 0; + if (!elv_iosched_allow_merge(rq, bio)) return 0; diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 5f8e798ede4..f0e0ce0a607 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -32,6 +32,11 @@ #include <scsi/scsi_ioctl.h> #include <scsi/scsi_cmnd.h> +struct blk_cmd_filter { + unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; + unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; +} blk_default_cmd_filter; + /* Command group 3 is reserved and should never be used. */ const unsigned char scsi_command_size_tbl[8] = { @@ -105,7 +110,7 @@ static int sg_emulated_host(struct request_queue *q, int __user *p) return put_user(1, p); } -void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter) +static void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter) { /* Basic read-only commands */ __set_bit(TEST_UNIT_READY, filter->read_ok); @@ -187,14 +192,37 @@ void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter) __set_bit(GPCMD_SET_STREAMING, filter->write_ok); __set_bit(GPCMD_SET_READ_AHEAD, filter->write_ok); } -EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults); + +int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm) +{ + struct blk_cmd_filter *filter = &blk_default_cmd_filter; + + /* root can do any command. */ + if (capable(CAP_SYS_RAWIO)) + return 0; + + /* if there's no filter set, assume we're filtering everything out */ + if (!filter) + return -EPERM; + + /* Anybody who can open the device can do a read-safe command */ + if (test_bit(cmd[0], filter->read_ok)) + return 0; + + /* Write-safe commands require a writable open */ + if (test_bit(cmd[0], filter->write_ok) && has_write_perm) + return 0; + + return -EPERM; +} +EXPORT_SYMBOL(blk_verify_command); static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, struct sg_io_hdr *hdr, fmode_t mode) { if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len)) return -EFAULT; - if (blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE)) + if (blk_verify_command(rq->cmd, mode & FMODE_WRITE)) return -EPERM; /* @@ -427,7 +455,7 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode, if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len)) goto error; - err = blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE); + err = blk_verify_command(rq->cmd, mode & FMODE_WRITE); if (err) goto error; @@ -645,5 +673,10 @@ int scsi_cmd_ioctl(struct request_queue *q, struct gendisk *bd_disk, fmode_t mod blk_put_queue(q); return err; } - EXPORT_SYMBOL(scsi_cmd_ioctl); + +int __init blk_scsi_ioctl_init(void) +{ + blk_set_cmd_filter_defaults(&blk_default_cmd_filter); + return 0; +} diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 8a5bf3b356f..55b5b90c2a4 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -395,7 +395,7 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle) fn = adr & 0xffff; pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn)); - if (hnd == handle) + if (!pdev || hnd == handle) break; pbus = pdev->subordinate; diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 3d763fdf99b..24665067301 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -207,6 +207,16 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) void __iomem *tmp; int i, ret; + device_initialize(&dev->dev); + + /* + * Copy from device_add + */ + if (dev->dev.init_name) { + dev_set_name(&dev->dev, "%s", dev->dev.init_name); + dev->dev.init_name = NULL; + } + dev->dev.release = amba_device_release; dev->dev.bus = &amba_bustype; dev->dev.dma_mask = &dev->dma_mask; @@ -240,7 +250,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) goto err_release; } - ret = device_register(&dev->dev); + ret = device_add(&dev->dev); if (ret) goto err_release; diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index ddeb819c8f8..fc466531260 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -357,7 +357,7 @@ static void fw_dev_release(struct device *dev) kfree(fw_priv->pages); kfree(fw_priv->fw_id); kfree(fw_priv); - put_device(dev); + kfree(dev); module_put(THIS_MODULE); } @@ -408,13 +408,11 @@ static int fw_register_device(struct device **dev_p, const char *fw_name, if (retval) { dev_err(device, "%s: device_register failed\n", __func__); put_device(f_dev); - goto error_kfree_fw_id; + return retval; } *dev_p = f_dev; return 0; -error_kfree_fw_id: - kfree(fw_priv->fw_id); error_kfree: kfree(f_dev); kfree(fw_priv); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index fae72545898..58a3e572f2c 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -762,6 +762,7 @@ static int dpm_prepare(pm_message_t state) dev->power.status = DPM_ON; if (error == -EAGAIN) { put_device(dev); + error = 0; continue; } printk(KERN_ERR "PM: Failed to prepare device %s " diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 9c6e5b0fe89..2f07b7c99a9 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1645,7 +1645,7 @@ static int __init fd_probe_drives(void) { int drive,drives,nomem; - printk(KERN_INFO "FD: probing units\n" KERN_INFO "found "); + printk(KERN_INFO "FD: probing units\nfound "); drives=0; nomem=0; for(drive=0;drive<FD_MAX_UNITS;drive++) { diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index c7a527c08a0..65a0655e7fc 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -226,8 +226,18 @@ static inline void addQ(struct hlist_head *list, CommandList_struct *c) static inline void removeQ(CommandList_struct *c) { - if (WARN_ON(hlist_unhashed(&c->list))) + /* + * After kexec/dump some commands might still + * be in flight, which the firmware will try + * to complete. Resetting the firmware doesn't work + * with old fw revisions, so we have to mark + * them off as 'stale' to prevent the driver from + * falling over. + */ + if (WARN_ON(hlist_unhashed(&c->list))) { + c->cmd_type = CMD_MSG_STALE; return; + } hlist_del_init(&c->list); } @@ -4246,7 +4256,8 @@ static void fail_all_cmds(unsigned long ctlr) while (!hlist_empty(&h->cmpQ)) { c = hlist_entry(h->cmpQ.first, CommandList_struct, list); removeQ(c); - c->err_info->CommandStatus = CMD_HARDWARE_ERR; + if (c->cmd_type != CMD_MSG_STALE) + c->err_info->CommandStatus = CMD_HARDWARE_ERR; if (c->cmd_type == CMD_RWREQ) { complete_command(h, c, 0); } else if (c->cmd_type == CMD_IOCTL_PEND) diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h index cd665b00c7c..dbaed1ea0da 100644 --- a/drivers/block/cciss_cmd.h +++ b/drivers/block/cciss_cmd.h @@ -274,6 +274,7 @@ typedef struct _ErrorInfo_struct { #define CMD_SCSI 0x03 #define CMD_MSG_DONE 0x04 #define CMD_MSG_TIMEOUT 0x05 +#define CMD_MSG_STALE 0xff /* This structure needs to be divisible by 8 for new * indexing method. diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 862b40c9018..91b75301378 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3327,7 +3327,10 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g, if (!capable(CAP_SYS_ADMIN)) return -EPERM; mutex_lock(&open_lock); - LOCK_FDC(drive, 1); + if (lock_fdc(drive, 1)) { + mutex_unlock(&open_lock); + return -EINTR; + } floppy_type[type] = *g; floppy_type[type].name = "user format"; for (cnt = type << 2; cnt < (type << 2) + 4; cnt++) diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index f08491a3a81..b20abe102a2 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -390,9 +390,10 @@ static inline void ace_dump_mem(void *base, int len) static void ace_dump_regs(struct ace_device *ace) { - dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" - KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n" - KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", + dev_info(ace->dev, + " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" + " status:%.8x mpu_lba:%.8x busmode:%4x\n" + " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", ace_in32(ace, ACE_CTRL), ace_in(ace, ACE_SECCNTCMD), ace_in(ace, ACE_VERSION), diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0bd01f49cfd..6a06913b01d 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -1029,10 +1029,6 @@ config CS5535_GPIO If compiled as a module, it will be called cs5535_gpio. -config GPIO_VR41XX - tristate "NEC VR4100 series General-purpose I/O Unit support" - depends on CPU_VR41XX - config RAW_DRIVER tristate "RAW driver (/dev/raw/rawN)" depends on BLOCK diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 189efcff08c..66f779ad4f4 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -95,7 +95,6 @@ obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o -obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 140ea10ecb8..c02db01f736 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -27,6 +27,7 @@ #include <linux/cdev.h> #include <linux/list.h> #include <linux/mm.h> +#include <asm/pgtable.h> #include <asm/io.h> /* @@ -75,12 +76,13 @@ static struct class *bsr_class; static int bsr_major; enum { - BSR_8 = 0, - BSR_16 = 1, - BSR_64 = 2, - BSR_128 = 3, - BSR_UNKNOWN = 4, - BSR_MAX = 5, + BSR_8 = 0, + BSR_16 = 1, + BSR_64 = 2, + BSR_128 = 3, + BSR_4096 = 4, + BSR_UNKNOWN = 5, + BSR_MAX = 6, }; static unsigned bsr_types[BSR_MAX]; @@ -117,15 +119,22 @@ static int bsr_mmap(struct file *filp, struct vm_area_struct *vma) { unsigned long size = vma->vm_end - vma->vm_start; struct bsr_dev *dev = filp->private_data; + int ret; - if (size > dev->bsr_len || (size & (PAGE_SIZE-1))) - return -EINVAL; - - vma->vm_flags |= (VM_IO | VM_DONTEXPAND); vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT, - size, vma->vm_page_prot)) + /* check for the case of a small BSR device and map one 4k page for it*/ + if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE) + ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12, + vma->vm_page_prot); + else if (size <= dev->bsr_len) + ret = io_remap_pfn_range(vma, vma->vm_start, + dev->bsr_addr >> PAGE_SHIFT, + size, vma->vm_page_prot); + else + return -EINVAL; + + if (ret) return -EAGAIN; return 0; @@ -205,6 +214,11 @@ static int bsr_add_node(struct device_node *bn) cur->bsr_stride = bsr_stride[i]; cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs); + /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */ + /* we can only map 4k of it, so only advertise the 4k in sysfs */ + if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE) + cur->bsr_len = 4096; + switch(cur->bsr_bytes) { case 8: cur->bsr_type = BSR_8; @@ -218,9 +232,11 @@ static int bsr_add_node(struct device_node *bn) case 128: cur->bsr_type = BSR_128; break; + case 4096: + cur->bsr_type = BSR_4096; + break; default: cur->bsr_type = BSR_UNKNOWN; - printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes); } cur->bsr_num = bsr_types[cur->bsr_type]; diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5dcbe603eca..91b53eb1c05 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -305,10 +305,11 @@ static int __init intel_init_hw_struct(struct intel_rng_hw *intel_rng_hw, (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)) == BIOS_CNTL_LOCK_ENABLE_MASK) { static __initdata /*const*/ char warning[] = - KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n" - KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n" - KERN_WARNING PFX "you are certain that your system has a functional\n" - KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n"; + KERN_WARNING +PFX "Firmware space is locked read-only. If you can't or\n" +PFX "don't want to disable this in firmware setup, and if\n" +PFX "you are certain that your system has a functional\n" +PFX "RNG, try using the 'no_fwh_detect' option.\n"; if (no_fwh_detect) return -ENODEV; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 4159292e35c..621d1184673 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1478,10 +1478,10 @@ static int __devinit load_firmware(struct pci_dev *pdev, status = inw(base + 0x4); if (status != 0) { dev_warn(&pdev->dev, "Card%d rejected load header:\n" - KERN_WARNING "Address:0x%x\n" - KERN_WARNING "Count:0x%x\n" - KERN_WARNING "Status:0x%x\n", - index + 1, frame->addr, frame->count, status); + "Address:0x%x\n" + "Count:0x%x\n" + "Status:0x%x\n", + index + 1, frame->addr, frame->count, status); goto errrelfw; } outsw(base, frame->data, word_count); @@ -1526,10 +1526,10 @@ static int __devinit load_firmware(struct pci_dev *pdev, status = inw(base + 0x4); if (status != 0) { dev_warn(&pdev->dev, "Card%d rejected verify header:\n" - KERN_WARNING "Address:0x%x\n" - KERN_WARNING "Count:0x%x\n" - KERN_WARNING "Status: 0x%x\n", - index + 1, frame->addr, frame->count, status); + "Address:0x%x\n" + "Count:0x%x\n" + "Status: 0x%x\n", + index + 1, frame->addr, frame->count, status); goto errrelfw; } diff --git a/drivers/char/pty.c b/drivers/char/pty.c index daebe1ba43d..9d1b4f548f6 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -75,114 +75,88 @@ static void pty_close(struct tty_struct *tty, struct file *filp) */ static void pty_unthrottle(struct tty_struct *tty) { - struct tty_struct *o_tty = tty->link; - - if (!o_tty) - return; - - tty_wakeup(o_tty); + tty_wakeup(tty->link); set_bit(TTY_THROTTLED, &tty->flags); } -/* - * WSH 05/24/97: modified to - * (1) use space in tty->flip instead of a shared temp buffer - * The flip buffers aren't being used for a pty, so there's lots - * of space available. The buffer is protected by a per-pty - * semaphore that should almost never come under contention. - * (2) avoid redundant copying for cases where count >> receive_room - * N.B. Calls from user space may now return an error code instead of - * a count. +/** + * pty_space - report space left for writing + * @to: tty we are writing into * - * FIXME: Our pty_write method is called with our ldisc lock held but - * not our partners. We can't just wait on the other one blindly without - * risking deadlocks. At some point when everything has settled down we need - * to look into making pty_write at least able to sleep over an ldisc change. + * The tty buffers allow 64K but we sneak a peak and clip at 8K this + * allows a lot of overspill room for echo and other fun messes to + * be handled properly + */ + +static int pty_space(struct tty_struct *to) +{ + int n = 8192 - to->buf.memory_used; + if (n < 0) + return 0; + return n; +} + +/** + * pty_write - write to a pty + * @tty: the tty we write from + * @buf: kernel buffer of data + * @count: bytes to write * - * The return on no ldisc is a bit counter intuitive but the logic works - * like this. During an ldisc change the other end will flush its buffers. We - * thus return the full length which is identical to the case where we had - * proper locking and happened to queue the bytes just before the flush during - * the ldisc change. + * Our "hardware" write method. Data is coming from the ldisc which + * may be in a non sleeping state. We simply throw this at the other + * end of the link as if we were an IRQ handler receiving stuff for + * the other side of the pty/tty pair. */ + static int pty_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct tty_struct *to = tty->link; - struct tty_ldisc *ld; - int c = count; + int c; - if (!to || tty->stopped) + if (tty->stopped) return 0; - ld = tty_ldisc_ref(to); - - if (ld) { - c = to->receive_room; - if (c > count) - c = count; - ld->ops->receive_buf(to, buf, NULL, c); - tty_ldisc_deref(ld); + + /* This isn't locked but our 8K is quite sloppy so no + big deal */ + + c = pty_space(to); + if (c > count) + c = count; + if (c > 0) { + /* Stuff the data into the input queue of the other end */ + c = tty_insert_flip_string(to, buf, c); + /* And shovel */ + tty_flip_buffer_push(to); + tty_wakeup(tty); } return c; } +/** + * pty_write_room - write space + * @tty: tty we are writing from + * + * Report how many bytes the ldisc can send into the queue for + * the other device. + */ + static int pty_write_room(struct tty_struct *tty) { - struct tty_struct *to = tty->link; - - if (!to || tty->stopped) - return 0; - - return to->receive_room; + return pty_space(tty->link); } -/* - * WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior - * The chars_in_buffer() value is used by the ldisc select() function - * to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256). - * The pty driver chars_in_buffer() Master/Slave must behave differently: - * - * The Master side needs to allow typed-ahead commands to accumulate - * while being canonicalized, so we report "our buffer" as empty until - * some threshold is reached, and then report the count. (Any count > - * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock - * the count returned must be 0 if no canonical data is available to be - * read. (The N_TTY ldisc.chars_in_buffer now knows this.) +/** + * pty_chars_in_buffer - characters currently in our tx queue + * @tty: our tty * - * The Slave side passes all characters in raw mode to the Master side's - * buffer where they can be read immediately, so in this case we can - * return the true count in the buffer. + * Report how much we have in the transmit queue. As everything is + * instantly at the other end this is easy to implement. */ + static int pty_chars_in_buffer(struct tty_struct *tty) { - struct tty_struct *to = tty->link; - struct tty_ldisc *ld; - int count = 0; - - /* We should get the line discipline lock for "tty->link" */ - if (!to) - return 0; - /* We cannot take a sleeping reference here without deadlocking with - an ldisc change - but it doesn't really matter */ - ld = tty_ldisc_ref(to); - if (ld == NULL) - return 0; - - /* The ldisc must report 0 if no characters available to be read */ - if (ld->ops->chars_in_buffer) - count = ld->ops->chars_in_buffer(to); - - tty_ldisc_deref(ld); - - if (tty->driver->subtype == PTY_TYPE_SLAVE) - return count; - - /* Master side driver ... if the other side's read buffer is less than - * half full, return 0 to allow writers to proceed; otherwise return - * the count. This leaves a comfortable margin to avoid overflow, - * and still allows half a buffer's worth of typed-ahead commands. - */ - return (count < N_TTY_BUF_SIZE/2) ? 0 : count; + return 0; } /* Set the lock flag on a pty */ @@ -202,20 +176,10 @@ static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; unsigned long flags; - struct tty_ldisc *ld; if (!to) return; - ld = tty_ldisc_ref(to); - - /* The other end is changing discipline */ - if (!ld) - return; - - if (ld->ops->flush_buffer) - to->ldisc->ops->flush_buffer(to); - tty_ldisc_deref(ld); - + /* tty_buffer_flush(to); FIXME */ if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); tty->ctrl_status |= TIOCPKT_FLUSHWRITE; diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c index 6062b62800f..b3ec9b10e29 100644 --- a/drivers/char/tb0219.c +++ b/drivers/char/tb0219.c @@ -1,7 +1,7 @@ /* * Driver for TANBAC TB0219 base board. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,7 +28,7 @@ #include <asm/vr41xx/giu.h> #include <asm/vr41xx/tb0219.h> -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_DESCRIPTION("TANBAC TB0219 base board driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index a19e935847b..913aa8d3f1c 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -867,15 +867,22 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_wait_idle(tty); /* - * Shutdown the current line discipline, and reset it to N_TTY. - * - * FIXME: this MUST get fixed for the new reflocking + * Now kill off the ldisc */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; + + /* Ensure the next open requests the N_TTY ldisc */ + tty_set_termios_ldisc(tty, N_TTY); - tty_ldisc_reinit(tty); /* This will need doing differently if we need to lock */ if (o_tty) tty_ldisc_release(o_tty, NULL); + + /* And the memory resources remaining (buffers, termios) will be + disposed of when the kref hits zero */ } /** diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c index 54c837288d1..e69de29bb2d 100644 --- a/drivers/char/vr41xx_giu.c +++ b/drivers/char/vr41xx_giu.c @@ -1,680 +0,0 @@ -/* - * Driver for NEC VR4100 series General-purpose I/O Unit. - * - * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/smp_lock.h> -#include <linux/spinlock.h> -#include <linux/types.h> - -#include <asm/io.h> -#include <asm/vr41xx/giu.h> -#include <asm/vr41xx/irq.h> -#include <asm/vr41xx/vr41xx.h> - -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); -MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver"); -MODULE_LICENSE("GPL"); - -static int major; /* default is dynamic major device number */ -module_param(major, int, 0); -MODULE_PARM_DESC(major, "Major device number"); - -#define GIUIOSELL 0x00 -#define GIUIOSELH 0x02 -#define GIUPIODL 0x04 -#define GIUPIODH 0x06 -#define GIUINTSTATL 0x08 -#define GIUINTSTATH 0x0a -#define GIUINTENL 0x0c -#define GIUINTENH 0x0e -#define GIUINTTYPL 0x10 -#define GIUINTTYPH 0x12 -#define GIUINTALSELL 0x14 -#define GIUINTALSELH 0x16 -#define GIUINTHTSELL 0x18 -#define GIUINTHTSELH 0x1a -#define GIUPODATL 0x1c -#define GIUPODATEN 0x1c -#define GIUPODATH 0x1e - #define PIOEN0 0x0100 - #define PIOEN1 0x0200 -#define GIUPODAT 0x1e -#define GIUFEDGEINHL 0x20 -#define GIUFEDGEINHH 0x22 -#define GIUREDGEINHL 0x24 -#define GIUREDGEINHH 0x26 - -#define GIUUSEUPDN 0x1e0 -#define GIUTERMUPDN 0x1e2 - -#define GPIO_HAS_PULLUPDOWN_IO 0x0001 -#define GPIO_HAS_OUTPUT_ENABLE 0x0002 -#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100 - -static spinlock_t giu_lock; -static unsigned long giu_flags; -static unsigned int giu_nr_pins; - -static void __iomem *giu_base; - -#define giu_read(offset) readw(giu_base + (offset)) -#define giu_write(offset, value) writew((value), giu_base + (offset)) - -#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE) -#define GIUINT_HIGH_OFFSET 16 -#define GIUINT_HIGH_MAX 32 - -static inline uint16_t giu_set(uint16_t offset, uint16_t set) -{ - uint16_t data; - - data = giu_read(offset); - data |= set; - giu_write(offset, data); - - return data; -} - -static inline uint16_t giu_clear(uint16_t offset, uint16_t clear) -{ - uint16_t data; - - data = giu_read(offset); - data &= ~clear; - giu_write(offset, data); - - return data; -} - -static void ack_giuint_low(unsigned int irq) -{ - giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -static void mask_giuint_low(unsigned int irq) -{ - giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -static void mask_ack_giuint_low(unsigned int irq) -{ - unsigned int pin; - - pin = GPIO_PIN_OF_IRQ(irq); - giu_clear(GIUINTENL, 1 << pin); - giu_write(GIUINTSTATL, 1 << pin); -} - -static void unmask_giuint_low(unsigned int irq) -{ - giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -static struct irq_chip giuint_low_irq_chip = { - .name = "GIUINTL", - .ack = ack_giuint_low, - .mask = mask_giuint_low, - .mask_ack = mask_ack_giuint_low, - .unmask = unmask_giuint_low, -}; - -static void ack_giuint_high(unsigned int irq) -{ - giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -static void mask_giuint_high(unsigned int irq) -{ - giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -static void mask_ack_giuint_high(unsigned int irq) -{ - unsigned int pin; - - pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET; - giu_clear(GIUINTENH, 1 << pin); - giu_write(GIUINTSTATH, 1 << pin); -} - -static void unmask_giuint_high(unsigned int irq) -{ - giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -static struct irq_chip giuint_high_irq_chip = { - .name = "GIUINTH", - .ack = ack_giuint_high, - .mask = mask_giuint_high, - .mask_ack = mask_ack_giuint_high, - .unmask = unmask_giuint_high, -}; - -static int giu_get_irq(unsigned int irq) -{ - uint16_t pendl, pendh, maskl, maskh; - int i; - - pendl = giu_read(GIUINTSTATL); - pendh = giu_read(GIUINTSTATH); - maskl = giu_read(GIUINTENL); - maskh = giu_read(GIUINTENH); - - maskl &= pendl; - maskh &= pendh; - - if (maskl) { - for (i = 0; i < 16; i++) { - if (maskl & (1 << i)) - return GIU_IRQ(i); - } - } else if (maskh) { - for (i = 0; i < 16; i++) { - if (maskh & (1 << i)) - return GIU_IRQ(i + GIUINT_HIGH_OFFSET); - } - } - - printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", - maskl, pendl, maskh, pendh); - - atomic_inc(&irq_err_count); - - return -EINVAL; -} - -void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal) -{ - uint16_t mask; - - if (pin < GIUINT_HIGH_OFFSET) { - mask = 1 << pin; - if (trigger != IRQ_TRIGGER_LEVEL) { - giu_set(GIUINTTYPL, mask); - if (signal == IRQ_SIGNAL_HOLD) - giu_set(GIUINTHTSELL, mask); - else - giu_clear(GIUINTHTSELL, mask); - if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { - switch (trigger) { - case IRQ_TRIGGER_EDGE_FALLING: - giu_set(GIUFEDGEINHL, mask); - giu_clear(GIUREDGEINHL, mask); - break; - case IRQ_TRIGGER_EDGE_RISING: - giu_clear(GIUFEDGEINHL, mask); - giu_set(GIUREDGEINHL, mask); - break; - default: - giu_set(GIUFEDGEINHL, mask); - giu_set(GIUREDGEINHL, mask); - break; - } - } - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_low_irq_chip, - handle_edge_irq); - } else { - giu_clear(GIUINTTYPL, mask); - giu_clear(GIUINTHTSELL, mask); - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_low_irq_chip, - handle_level_irq); - } - giu_write(GIUINTSTATL, mask); - } else if (pin < GIUINT_HIGH_MAX) { - mask = 1 << (pin - GIUINT_HIGH_OFFSET); - if (trigger != IRQ_TRIGGER_LEVEL) { - giu_set(GIUINTTYPH, mask); - if (signal == IRQ_SIGNAL_HOLD) - giu_set(GIUINTHTSELH, mask); - else - giu_clear(GIUINTHTSELH, mask); - if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { - switch (trigger) { - case IRQ_TRIGGER_EDGE_FALLING: - giu_set(GIUFEDGEINHH, mask); - giu_clear(GIUREDGEINHH, mask); - break; - case IRQ_TRIGGER_EDGE_RISING: - giu_clear(GIUFEDGEINHH, mask); - giu_set(GIUREDGEINHH, mask); - break; - default: - giu_set(GIUFEDGEINHH, mask); - giu_set(GIUREDGEINHH, mask); - break; - } - } - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_high_irq_chip, - handle_edge_irq); - } else { - giu_clear(GIUINTTYPH, mask); - giu_clear(GIUINTHTSELH, mask); - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_high_irq_chip, - handle_level_irq); - } - giu_write(GIUINTSTATH, mask); - } -} -EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger); - -void vr41xx_set_irq_level(unsigned int pin, irq_level_t level) -{ - uint16_t mask; - - if (pin < GIUINT_HIGH_OFFSET) { - mask = 1 << pin; - if (level == IRQ_LEVEL_HIGH) - giu_set(GIUINTALSELL, mask); - else - giu_clear(GIUINTALSELL, mask); - giu_write(GIUINTSTATL, mask); - } else if (pin < GIUINT_HIGH_MAX) { - mask = 1 << (pin - GIUINT_HIGH_OFFSET); - if (level == IRQ_LEVEL_HIGH) - giu_set(GIUINTALSELH, mask); - else - giu_clear(GIUINTALSELH, mask); - giu_write(GIUINTSTATH, mask); - } -} -EXPORT_SYMBOL_GPL(vr41xx_set_irq_level); - -gpio_data_t vr41xx_gpio_get_pin(unsigned int pin) -{ - uint16_t reg, mask; - - if (pin >= giu_nr_pins) - return GPIO_DATA_INVAL; - - if (pin < 16) { - reg = giu_read(GIUPIODL); - mask = (uint16_t)1 << pin; - } else if (pin < 32) { - reg = giu_read(GIUPIODH); - mask = (uint16_t)1 << (pin - 16); - } else if (pin < 48) { - reg = giu_read(GIUPODATL); - mask = (uint16_t)1 << (pin - 32); - } else { - reg = giu_read(GIUPODATH); - mask = (uint16_t)1 << (pin - 48); - } - - if (reg & mask) - return GPIO_DATA_HIGH; - - return GPIO_DATA_LOW; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin); - -int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data) -{ - uint16_t offset, mask, reg; - unsigned long flags; - - if (pin >= giu_nr_pins) - return -EINVAL; - - if (pin < 16) { - offset = GIUPIODL; - mask = (uint16_t)1 << pin; - } else if (pin < 32) { - offset = GIUPIODH; - mask = (uint16_t)1 << (pin - 16); - } else if (pin < 48) { - offset = GIUPODATL; - mask = (uint16_t)1 << (pin - 32); - } else { - offset = GIUPODATH; - mask = (uint16_t)1 << (pin - 48); - } - - spin_lock_irqsave(&giu_lock, flags); - - reg = giu_read(offset); - if (data == GPIO_DATA_HIGH) - reg |= mask; - else - reg &= ~mask; - giu_write(offset, reg); - - spin_unlock_irqrestore(&giu_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin); - -int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir) -{ - uint16_t offset, mask, reg; - unsigned long flags; - - if (pin >= giu_nr_pins) - return -EINVAL; - - if (pin < 16) { - offset = GIUIOSELL; - mask = (uint16_t)1 << pin; - } else if (pin < 32) { - offset = GIUIOSELH; - mask = (uint16_t)1 << (pin - 16); - } else { - if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) { - offset = GIUPODATEN; - mask = (uint16_t)1 << (pin - 32); - } else { - switch (pin) { - case 48: - offset = GIUPODATH; - mask = PIOEN0; - break; - case 49: - offset = GIUPODATH; - mask = PIOEN1; - break; - default: - return -EINVAL; - } - } - } - - spin_lock_irqsave(&giu_lock, flags); - - reg = giu_read(offset); - if (dir == GPIO_OUTPUT) - reg |= mask; - else - reg &= ~mask; - giu_write(offset, reg); - - spin_unlock_irqrestore(&giu_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction); - -int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull) -{ - uint16_t reg, mask; - unsigned long flags; - - if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO) - return -EPERM; - - if (pin >= 15) - return -EINVAL; - - mask = (uint16_t)1 << pin; - - spin_lock_irqsave(&giu_lock, flags); - - if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) { - reg = giu_read(GIUTERMUPDN); - if (pull == GPIO_PULL_UP) - reg |= mask; - else - reg &= ~mask; - giu_write(GIUTERMUPDN, reg); - - reg = giu_read(GIUUSEUPDN); - reg |= mask; - giu_write(GIUUSEUPDN, reg); - } else { - reg = giu_read(GIUUSEUPDN); - reg &= ~mask; - giu_write(GIUUSEUPDN, reg); - } - - spin_unlock_irqrestore(&giu_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown); - -static ssize_t gpio_read(struct file *file, char __user *buf, size_t len, - loff_t *ppos) -{ - unsigned int pin; - char value = '0'; - - pin = iminor(file->f_path.dentry->d_inode); - if (pin >= giu_nr_pins) - return -EBADF; - - if (vr41xx_gpio_get_pin(pin) == GPIO_DATA_HIGH) - value = '1'; - - if (len <= 0) - return -EFAULT; - - if (put_user(value, buf)) - return -EFAULT; - - return 1; -} - -static ssize_t gpio_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - unsigned int pin; - size_t i; - char c; - int retval = 0; - - pin = iminor(file->f_path.dentry->d_inode); - if (pin >= giu_nr_pins) - return -EBADF; - - for (i = 0; i < len; i++) { - if (get_user(c, data + i)) - return -EFAULT; - - switch (c) { - case '0': - retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_LOW); - break; - case '1': - retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_HIGH); - break; - case 'D': - printk(KERN_INFO "GPIO%d: pull down\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DOWN); - break; - case 'd': - printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE); - break; - case 'I': - printk(KERN_INFO "GPIO%d: input\n", pin); - retval = vr41xx_gpio_set_direction(pin, GPIO_INPUT); - break; - case 'O': - printk(KERN_INFO "GPIO%d: output\n", pin); - retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT); - break; - case 'o': - printk(KERN_INFO "GPIO%d: output disable\n", pin); - retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT_DISABLE); - break; - case 'P': - printk(KERN_INFO "GPIO%d: pull up\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_UP); - break; - case 'p': - printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE); - break; - default: - break; - } - - if (retval < 0) - break; - } - - return i; -} - -static int gpio_open(struct inode *inode, struct file *file) -{ - unsigned int pin; - - cycle_kernel_lock(); - pin = iminor(inode); - if (pin >= giu_nr_pins) - return -EBADF; - - return nonseekable_open(inode, file); -} - -static int gpio_release(struct inode *inode, struct file *file) -{ - unsigned int pin; - - pin = iminor(inode); - if (pin >= giu_nr_pins) - return -EBADF; - - return 0; -} - -static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .read = gpio_read, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, -}; - -static int __devinit giu_probe(struct platform_device *dev) -{ - struct resource *res; - unsigned int trigger, i, pin; - struct irq_chip *chip; - int irq, retval; - - switch (dev->id) { - case GPIO_50PINS_PULLUPDOWN: - giu_flags = GPIO_HAS_PULLUPDOWN_IO; - giu_nr_pins = 50; - break; - case GPIO_36PINS: - giu_nr_pins = 36; - break; - case GPIO_48PINS_EDGE_SELECT: - giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT; - giu_nr_pins = 48; - break; - default: - printk(KERN_ERR "GIU: unknown ID %d\n", dev->id); - return -ENODEV; - } - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - return -EBUSY; - - giu_base = ioremap(res->start, res->end - res->start + 1); - if (!giu_base) - return -ENOMEM; - - retval = register_chrdev(major, "GIU", &gpio_fops); - if (retval < 0) { - iounmap(giu_base); - giu_base = NULL; - return retval; - } - - if (major == 0) { - major = retval; - printk(KERN_INFO "GIU: major number %d\n", major); - } - - spin_lock_init(&giu_lock); - - giu_write(GIUINTENL, 0); - giu_write(GIUINTENH, 0); - - trigger = giu_read(GIUINTTYPH) << 16; - trigger |= giu_read(GIUINTTYPL); - for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { - pin = GPIO_PIN_OF_IRQ(i); - if (pin < GIUINT_HIGH_OFFSET) - chip = &giuint_low_irq_chip; - else - chip = &giuint_high_irq_chip; - - if (trigger & (1 << pin)) - set_irq_chip_and_handler(i, chip, handle_edge_irq); - else - set_irq_chip_and_handler(i, chip, handle_level_irq); - - } - - irq = platform_get_irq(dev, 0); - if (irq < 0 || irq >= nr_irqs) - return -EBUSY; - - return cascade_irq(irq, giu_get_irq); -} - -static int __devexit giu_remove(struct platform_device *dev) -{ - if (giu_base) { - iounmap(giu_base); - giu_base = NULL; - } - - return 0; -} - -static struct platform_driver giu_device_driver = { - .probe = giu_probe, - .remove = __devexit_p(giu_remove), - .driver = { - .name = "GIU", - .owner = THIS_MODULE, - }, -}; - -static int __init vr41xx_giu_init(void) -{ - return platform_driver_register(&giu_device_driver); -} - -static void __exit vr41xx_giu_exit(void) -{ - platform_driver_unregister(&giu_device_driver); -} - -module_init(vr41xx_giu_init); -module_exit(vr41xx_giu_exit); diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 9ffb05f4095..93c2322feab 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -161,7 +161,7 @@ static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, if (periodic) sh_tmu_write(p, TCOR, delta); else - sh_tmu_write(p, TCOR, 0); + sh_tmu_write(p, TCOR, 0xffffffff); sh_tmu_write(p, TCNT, delta); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 6e2ec0b1894..b90eda8b344 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -761,6 +761,10 @@ static struct kobj_type ktype_cpufreq = { * cpufreq_add_dev - add a CPU device * * Adds the cpufreq interface for a CPU device. + * + * The Oracle says: try running cpufreq registration/unregistration concurrently + * with with cpu hotplugging and all hell will break loose. Tried to clean this + * mess up, but more thorough testing is needed. - Mathieu */ static int cpufreq_add_dev(struct sys_device *sys_dev) { @@ -772,9 +776,6 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) struct sys_device *cpu_sys_dev; unsigned long flags; unsigned int j; -#ifdef CONFIG_SMP - struct cpufreq_policy *managed_policy; -#endif if (cpu_is_offline(cpu)) return 0; @@ -804,15 +805,12 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) goto nomem_out; } if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) { - kfree(policy); ret = -ENOMEM; - goto nomem_out; + goto err_free_policy; } if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { - free_cpumask_var(policy->cpus); - kfree(policy); ret = -ENOMEM; - goto nomem_out; + goto err_free_cpumask; } policy->cpu = cpu; @@ -820,7 +818,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) /* Initially set CPU itself as the policy_cpu */ per_cpu(policy_cpu, cpu) = cpu; - lock_policy_rwsem_write(cpu); + ret = (lock_policy_rwsem_write(cpu) < 0); + WARN_ON(ret); init_completion(&policy->kobj_unregister); INIT_WORK(&policy->update, handle_update); @@ -833,7 +832,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = cpufreq_driver->init(policy); if (ret) { dprintk("initialization failed\n"); - goto err_out; + goto err_unlock_policy; } policy->user_policy.min = policy->min; policy->user_policy.max = policy->max; @@ -852,21 +851,29 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) #endif for_each_cpu(j, policy->cpus) { + struct cpufreq_policy *managed_policy; + if (cpu == j) continue; /* Check for existing affected CPUs. * They may not be aware of it due to CPU Hotplug. */ - managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */ + managed_policy = cpufreq_cpu_get(j); if (unlikely(managed_policy)) { /* Set proper policy_cpu */ unlock_policy_rwsem_write(cpu); per_cpu(policy_cpu, cpu) = managed_policy->cpu; - if (lock_policy_rwsem_write(cpu) < 0) - goto err_out_driver_exit; + if (lock_policy_rwsem_write(cpu) < 0) { + /* Should not go through policy unlock path */ + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); + ret = -EBUSY; + cpufreq_cpu_put(managed_policy); + goto err_free_cpumask; + } spin_lock_irqsave(&cpufreq_driver_lock, flags); cpumask_copy(managed_policy->cpus, policy->cpus); @@ -877,12 +884,14 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = sysfs_create_link(&sys_dev->kobj, &managed_policy->kobj, "cpufreq"); - if (ret) - goto err_out_driver_exit; - - cpufreq_debug_enable_ratelimit(); - ret = 0; - goto err_out_driver_exit; /* call driver->exit() */ + if (!ret) + cpufreq_cpu_put(managed_policy); + /* + * Success. We only needed to be added to the mask. + * Call driver->exit() because only the cpu parent of + * the kobj needed to call init(). + */ + goto out_driver_exit; /* call driver->exit() */ } } #endif @@ -892,25 +901,25 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, "cpufreq"); if (ret) - goto err_out_driver_exit; + goto out_driver_exit; /* set up files for this cpu device */ drv_attr = cpufreq_driver->attr; while ((drv_attr) && (*drv_attr)) { ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; drv_attr++; } if (cpufreq_driver->get) { ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; } if (cpufreq_driver->target) { ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; } spin_lock_irqsave(&cpufreq_driver_lock, flags); @@ -922,18 +931,22 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) /* symlink affected CPUs */ for_each_cpu(j, policy->cpus) { + struct cpufreq_policy *managed_policy; + if (j == cpu) continue; if (!cpu_online(j)) continue; dprintk("CPU %u already managed, adding link\n", j); - cpufreq_cpu_get(cpu); + managed_policy = cpufreq_cpu_get(cpu); cpu_sys_dev = get_cpu_sysdev(j); ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj, "cpufreq"); - if (ret) + if (ret) { + cpufreq_cpu_put(managed_policy); goto err_out_unregister; + } } policy->governor = NULL; /* to assure that the starting sequence is @@ -965,17 +978,20 @@ err_out_unregister: per_cpu(cpufreq_cpu_data, j) = NULL; spin_unlock_irqrestore(&cpufreq_driver_lock, flags); +err_out_kobj_put: kobject_put(&policy->kobj); wait_for_completion(&policy->kobj_unregister); -err_out_driver_exit: +out_driver_exit: if (cpufreq_driver->exit) cpufreq_driver->exit(policy); -err_out: +err_unlock_policy: unlock_policy_rwsem_write(cpu); +err_free_cpumask: + free_cpumask_var(policy->cpus); +err_free_policy: kfree(policy); - nomem_out: module_put(cpufreq_driver->owner); module_out: @@ -1070,8 +1086,6 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif - unlock_policy_rwsem_write(cpu); - if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); @@ -1088,6 +1102,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) if (cpufreq_driver->exit) cpufreq_driver->exit(data); + unlock_policy_rwsem_write(cpu); + free_cpumask_var(data->related_cpus); free_cpumask_var(data->cpus); kfree(data); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 7fc58af748b..57490502b21 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -63,22 +63,20 @@ struct cpu_dbs_info_s { unsigned int down_skip; unsigned int requested_freq; int cpu; - unsigned int enable:1; + /* + * percpu mutex that serializes governor limit change with + * do_dbs_timer invocation. We do not want do_dbs_timer to run + * when user is changing the governor or limits. + */ + struct mutex timer_mutex; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ /* - * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug - * lock and dbs_mutex. cpu_hotplug lock should always be held before - * dbs_mutex. If any function that can potentially take cpu_hotplug lock - * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then - * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock - * is recursive for the same process. -Venki - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it - * would deadlock with cancel_delayed_work_sync(), which is needed for proper - * raceless workqueue teardown. + * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on + * different CPUs. It protects dbs_enable in governor start/stop. */ static DEFINE_MUTEX(dbs_mutex); @@ -143,9 +141,6 @@ dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val, struct cpufreq_policy *policy; - if (!this_dbs_info->enable) - return 0; - policy = this_dbs_info->cur_policy; /* @@ -488,18 +483,12 @@ static void do_dbs_timer(struct work_struct *work) delay -= jiffies % delay; - if (lock_policy_rwsem_write(cpu) < 0) - return; - - if (!dbs_info->enable) { - unlock_policy_rwsem_write(cpu); - return; - } + mutex_lock(&dbs_info->timer_mutex); dbs_check_cpu(dbs_info); queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay); - unlock_policy_rwsem_write(cpu); + mutex_unlock(&dbs_info->timer_mutex); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -508,7 +497,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work, delay); @@ -516,7 +504,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - dbs_info->enable = 0; cancel_delayed_work_sync(&dbs_info->work); } @@ -535,9 +522,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; - if (this_dbs_info->enable) /* Already enabled */ - break; - mutex_lock(&dbs_mutex); rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); @@ -561,6 +545,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, this_dbs_info->down_skip = 0; this_dbs_info->requested_freq = policy->cur; + mutex_init(&this_dbs_info->timer_mutex); dbs_enable++; /* * Start the timerschedule work, when this governor @@ -590,17 +575,19 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, &dbs_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); } - dbs_timer_init(this_dbs_info); - mutex_unlock(&dbs_mutex); + dbs_timer_init(this_dbs_info); + break; case CPUFREQ_GOV_STOP: - mutex_lock(&dbs_mutex); dbs_timer_exit(this_dbs_info); + + mutex_lock(&dbs_mutex); sysfs_remove_group(&policy->kobj, &dbs_attr_group); dbs_enable--; + mutex_destroy(&this_dbs_info->timer_mutex); /* * Stop the timerschedule work, when this governor @@ -616,7 +603,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, break; case CPUFREQ_GOV_LIMITS: - mutex_lock(&dbs_mutex); + mutex_lock(&this_dbs_info->timer_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target( this_dbs_info->cur_policy, @@ -625,7 +612,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, __cpufreq_driver_target( this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); - mutex_unlock(&dbs_mutex); + mutex_unlock(&this_dbs_info->timer_mutex); break; } diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 1911d172935..d6ba14276bb 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -70,23 +70,21 @@ struct cpu_dbs_info_s { unsigned int freq_lo_jiffies; unsigned int freq_hi_jiffies; int cpu; - unsigned int enable:1, - sample_type:1; + unsigned int sample_type:1; + /* + * percpu mutex that serializes governor limit change with + * do_dbs_timer invocation. We do not want do_dbs_timer to run + * when user is changing the governor or limits. + */ + struct mutex timer_mutex; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ /* - * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug - * lock and dbs_mutex. cpu_hotplug lock should always be held before - * dbs_mutex. If any function that can potentially take cpu_hotplug lock - * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then - * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock - * is recursive for the same process. -Venki - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it - * would deadlock with cancel_delayed_work_sync(), which is needed for proper - * raceless workqueue teardown. + * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on + * different CPUs. It protects dbs_enable in governor start/stop. */ static DEFINE_MUTEX(dbs_mutex); @@ -192,13 +190,18 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy, return freq_hi; } +static void ondemand_powersave_bias_init_cpu(int cpu) +{ + struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); + dbs_info->freq_table = cpufreq_frequency_get_table(cpu); + dbs_info->freq_lo = 0; +} + static void ondemand_powersave_bias_init(void) { int i; for_each_online_cpu(i) { - struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i); - dbs_info->freq_table = cpufreq_frequency_get_table(i); - dbs_info->freq_lo = 0; + ondemand_powersave_bias_init_cpu(i); } } @@ -240,12 +243,10 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, unsigned int input; int ret; ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; mutex_lock(&dbs_mutex); - if (ret != 1) { - mutex_unlock(&dbs_mutex); - return -EINVAL; - } dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate); mutex_unlock(&dbs_mutex); @@ -259,13 +260,12 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, int ret; ret = sscanf(buf, "%u", &input); - mutex_lock(&dbs_mutex); if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || input < MIN_FREQUENCY_UP_THRESHOLD) { - mutex_unlock(&dbs_mutex); return -EINVAL; } + mutex_lock(&dbs_mutex); dbs_tuners_ins.up_threshold = input; mutex_unlock(&dbs_mutex); @@ -363,9 +363,6 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) struct cpufreq_policy *policy; unsigned int j; - if (!this_dbs_info->enable) - return; - this_dbs_info->freq_lo = 0; policy = this_dbs_info->cur_policy; @@ -493,14 +490,7 @@ static void do_dbs_timer(struct work_struct *work) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - - if (lock_policy_rwsem_write(cpu) < 0) - return; - - if (!dbs_info->enable) { - unlock_policy_rwsem_write(cpu); - return; - } + mutex_lock(&dbs_info->timer_mutex); /* Common NORMAL_SAMPLE setup */ dbs_info->sample_type = DBS_NORMAL_SAMPLE; @@ -517,7 +507,7 @@ static void do_dbs_timer(struct work_struct *work) dbs_info->freq_lo, CPUFREQ_RELATION_H); } queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); - unlock_policy_rwsem_write(cpu); + mutex_unlock(&dbs_info->timer_mutex); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -526,8 +516,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; - ondemand_powersave_bias_init(); dbs_info->sample_type = DBS_NORMAL_SAMPLE; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work, @@ -536,7 +524,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - dbs_info->enable = 0; cancel_delayed_work_sync(&dbs_info->work); } @@ -555,19 +542,15 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; - if (this_dbs_info->enable) /* Already enabled */ - break; - mutex_lock(&dbs_mutex); - dbs_enable++; rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); if (rc) { - dbs_enable--; mutex_unlock(&dbs_mutex); return rc; } + dbs_enable++; for_each_cpu(j, policy->cpus) { struct cpu_dbs_info_s *j_dbs_info; j_dbs_info = &per_cpu(cpu_dbs_info, j); @@ -581,6 +564,8 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, } } this_dbs_info->cpu = cpu; + ondemand_powersave_bias_init_cpu(cpu); + mutex_init(&this_dbs_info->timer_mutex); /* * Start the timerschedule work, when this governor * is used for first time @@ -598,29 +583,31 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, max(min_sampling_rate, latency * LATENCY_MULTIPLIER); } - dbs_timer_init(this_dbs_info); - mutex_unlock(&dbs_mutex); + + dbs_timer_init(this_dbs_info); break; case CPUFREQ_GOV_STOP: - mutex_lock(&dbs_mutex); dbs_timer_exit(this_dbs_info); + + mutex_lock(&dbs_mutex); sysfs_remove_group(&policy->kobj, &dbs_attr_group); + mutex_destroy(&this_dbs_info->timer_mutex); dbs_enable--; mutex_unlock(&dbs_mutex); break; case CPUFREQ_GOV_LIMITS: - mutex_lock(&dbs_mutex); + mutex_lock(&this_dbs_info->timer_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->max, CPUFREQ_RELATION_H); else if (policy->min > this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); - mutex_unlock(&dbs_mutex); + mutex_unlock(&this_dbs_info->timer_mutex); break; } return 0; diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c36bf40568c..858fe603722 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -754,13 +754,13 @@ static void amd64_cpu_display_info(struct amd64_pvt *pvt) static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) { int bit; - enum dev_type edac_cap = EDAC_NONE; + enum dev_type edac_cap = EDAC_FLAG_NONE; bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F) ? 19 : 17; - if (pvt->dclr0 >> BIT(bit)) + if (pvt->dclr0 & BIT(bit)) edac_cap = EDAC_FLAG_SECDED; return edac_cap; @@ -1269,7 +1269,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt) if (channels == 0) channels = 1; - debugf0("DIMM count= %d\n", channels); + debugf0("MCT channel count: %d\n", channels); return channels; @@ -2966,7 +2966,12 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) " Use of the override can cause " "unknown side effects.\n"); ret = -ENODEV; - } + } else + /* + * enable further driver loading if ECC enable is + * overridden. + */ + ret = 0; } else { amd64_printk(KERN_INFO, "ECC is enabled by BIOS, Proceeding " @@ -3006,7 +3011,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; mci->edac_ctl_cap = EDAC_FLAG_NONE; - mci->edac_cap = EDAC_FLAG_NONE; if (pvt->nbcap & K8_NBCAP_SECDED) mci->edac_ctl_cap |= EDAC_FLAG_SECDED; @@ -3052,7 +3056,7 @@ static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl, if (!pvt) goto err_exit; - pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl); + pvt->mc_node_id = get_node_id(dram_f2_ctl); pvt->dram_f2_ctl = dram_f2_ctl; pvt->ext_model = boot_cpu_data.x86_model >> 4; @@ -3179,8 +3183,7 @@ static int __devinit amd64_init_one_instance(struct pci_dev *pdev, { int ret = 0; - debugf0("(MC node=%d,mc_type='%s')\n", - get_mc_node_id_from_pdev(pdev), + debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev), get_amd_family_name(mc_type->driver_data)); ret = pci_enable_device(pdev); @@ -3319,15 +3322,17 @@ static int __init amd64_edac_init(void) err = amd64_init_2nd_stage(pvt_lookup[nb]); if (err) - goto err_exit; + goto err_2nd_stage; } amd64_setup_pci_device(); return 0; +err_2nd_stage: + debugf0("2nd stage failed\n"); + err_exit: - debugf0("'finish_setup' stage failed\n"); pci_unregister_driver(&amd64_pci_driver); return err; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index a159957e167..ba73015af8e 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -444,7 +444,7 @@ enum { #define K8_MSR_MC4ADDR 0x0412 /* AMD sets the first MC device at device ID 0x18. */ -static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev) +static inline int get_node_id(struct pci_dev *pdev) { return PCI_SLOT(pdev->devfn) - 0x18; } diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 3493c6bdb82..871c13b4c14 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -150,6 +150,8 @@ enum mem_type { MEM_FB_DDR2, /* fully buffered DDR2 */ MEM_RDDR2, /* Registered DDR2 RAM */ MEM_XDR, /* Rambus XDR */ + MEM_DDR3, /* DDR3 RAM */ + MEM_RDDR3, /* Registered DDR3 RAM */ }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) @@ -167,6 +169,8 @@ enum mem_type { #define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) #define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) #define MEM_FLAG_XDR BIT(MEM_XDR) +#define MEM_FLAG_DDR3 BIT(MEM_DDR3) +#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) /* chipset Error Detection and Correction capabilities and mode */ enum edac_type { diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index ad218fe4942..e1d4ce08348 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -94,7 +94,9 @@ static const char *mem_types[] = { [MEM_DDR2] = "Unbuffered-DDR2", [MEM_FB_DDR2] = "FullyBuffered-DDR2", [MEM_RDDR2] = "Registered-DDR2", - [MEM_XDR] = "XDR" + [MEM_XDR] = "XDR", + [MEM_DDR3] = "Unbuffered-DDR3", + [MEM_RDDR3] = "Registered-DDR3" }; static const char *dev_types[] = { diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 7c8c2d72916..3f2ccfc6407 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -757,6 +757,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) case DSC_SDTYPE_DDR2: mtype = MEM_RDDR2; break; + case DSC_SDTYPE_DDR3: + mtype = MEM_RDDR3; + break; default: mtype = MEM_UNKNOWN; break; @@ -769,6 +772,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) case DSC_SDTYPE_DDR2: mtype = MEM_DDR2; break; + case DSC_SDTYPE_DDR3: + mtype = MEM_DDR3; + break; default: mtype = MEM_UNKNOWN; break; diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h index 135b3539a03..52432ee7c4b 100644 --- a/drivers/edac/mpc85xx_edac.h +++ b/drivers/edac/mpc85xx_edac.h @@ -53,6 +53,7 @@ #define DSC_SDTYPE_DDR 0x02000000 #define DSC_SDTYPE_DDR2 0x03000000 +#define DSC_SDTYPE_DDR3 0x07000000 #define DSC_X32_EN 0x00000020 /* Err_Int_En */ diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 543fccac81b..f74edae5cb4 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -196,8 +196,8 @@ static void allocate_broadcast_channel(struct fw_card *card, int generation) { int channel, bandwidth = 0; - fw_iso_resource_manage(card, generation, 1ULL << 31, - &channel, &bandwidth, true); + fw_iso_resource_manage(card, generation, 1ULL << 31, &channel, + &bandwidth, true, card->bm_transaction_data); if (channel == 31) { card->broadcast_channel_allocated = true; device_for_each_child(card->device, (void *)(long)generation, @@ -230,7 +230,6 @@ static void fw_card_bm_work(struct work_struct *work) bool do_reset = false; bool root_device_is_running; bool root_device_is_cmc; - __be32 lock_data[2]; spin_lock_irqsave(&card->lock, flags); @@ -273,22 +272,23 @@ static void fw_card_bm_work(struct work_struct *work) goto pick_me; } - lock_data[0] = cpu_to_be32(0x3f); - lock_data[1] = cpu_to_be32(local_id); + card->bm_transaction_data[0] = cpu_to_be32(0x3f); + card->bm_transaction_data[1] = cpu_to_be32(local_id); spin_unlock_irqrestore(&card->lock, flags); rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP, irm_id, generation, SCODE_100, CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID, - lock_data, sizeof(lock_data)); + card->bm_transaction_data, + sizeof(card->bm_transaction_data)); if (rcode == RCODE_GENERATION) /* Another bus reset, BM work has been rescheduled. */ goto out; if (rcode == RCODE_COMPLETE && - lock_data[0] != cpu_to_be32(0x3f)) { + card->bm_transaction_data[0] != cpu_to_be32(0x3f)) { /* Somebody else is BM. Only act as IRM. */ if (local_id == irm_id) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index d1d30c615b0..ced186d7e9a 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -125,6 +125,7 @@ struct iso_resource { int generation; u64 channels; s32 bandwidth; + __be32 transaction_data[2]; struct iso_resource_event *e_alloc, *e_dealloc; }; @@ -1049,7 +1050,8 @@ static void iso_resource_work(struct work_struct *work) r->channels, &channel, &bandwidth, todo == ISO_RES_ALLOC || todo == ISO_RES_REALLOC || - todo == ISO_RES_ALLOC_ONCE); + todo == ISO_RES_ALLOC_ONCE, + r->transaction_data); /* * Is this generation outdated already? As long as this resource sticks * in the idr, it will be scheduled again for a newer generation or at diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 166f19c6d38..110e731f557 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -177,9 +177,8 @@ EXPORT_SYMBOL(fw_iso_context_stop); */ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, - int bandwidth, bool allocate) + int bandwidth, bool allocate, __be32 data[2]) { - __be32 data[2]; int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0; /* @@ -215,9 +214,9 @@ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, } static int manage_channel(struct fw_card *card, int irm_id, int generation, - u32 channels_mask, u64 offset, bool allocate) + u32 channels_mask, u64 offset, bool allocate, __be32 data[2]) { - __be32 data[2], c, all, old; + __be32 c, all, old; int i, retry = 5; old = all = allocate ? cpu_to_be32(~0) : 0; @@ -260,7 +259,7 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation, } static void deallocate_channel(struct fw_card *card, int irm_id, - int generation, int channel) + int generation, int channel, __be32 buffer[2]) { u32 mask; u64 offset; @@ -269,7 +268,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id, offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI : CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO; - manage_channel(card, irm_id, generation, mask, offset, false); + manage_channel(card, irm_id, generation, mask, offset, false, buffer); } /** @@ -298,7 +297,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id, */ void fw_iso_resource_manage(struct fw_card *card, int generation, u64 channels_mask, int *channel, int *bandwidth, - bool allocate) + bool allocate, __be32 buffer[2]) { u32 channels_hi = channels_mask; /* channels 31...0 */ u32 channels_lo = channels_mask >> 32; /* channels 63...32 */ @@ -310,10 +309,12 @@ void fw_iso_resource_manage(struct fw_card *card, int generation, if (channels_hi) c = manage_channel(card, irm_id, generation, channels_hi, - CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate); + CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, + allocate, buffer); if (channels_lo && c < 0) { c = manage_channel(card, irm_id, generation, channels_lo, - CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate); + CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, + allocate, buffer); if (c >= 0) c += 32; } @@ -325,12 +326,13 @@ void fw_iso_resource_manage(struct fw_card *card, int generation, if (*bandwidth == 0) return; - ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate); + ret = manage_bandwidth(card, irm_id, generation, *bandwidth, + allocate, buffer); if (ret < 0) *bandwidth = 0; if (allocate && ret < 0 && c >= 0) { - deallocate_channel(card, irm_id, generation, c); + deallocate_channel(card, irm_id, generation, c, buffer); *channel = ret; } } diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h index c3cfc647e5e..6052816be35 100644 --- a/drivers/firewire/core.h +++ b/drivers/firewire/core.h @@ -120,7 +120,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event); int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma); void fw_iso_resource_manage(struct fw_card *card, int generation, - u64 channels_mask, int *channel, int *bandwidth, bool allocate); + u64 channels_mask, int *channel, int *bandwidth, + bool allocate, __be32 buffer[2]); /* -topology */ diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 24c45635376..8d51568ee14 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -201,6 +201,12 @@ static struct fw_device *target_device(struct sbp2_target *tgt) #define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */ /* + * There is no transport protocol limit to the CDB length, but we implement + * a fixed length only. 16 bytes is enough for disks larger than 2 TB. + */ +#define SBP2_MAX_CDB_SIZE 16 + +/* * The default maximum s/g segment size of a FireWire controller is * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to * be quadlet-aligned, we set the length limit to 0xffff & ~3. @@ -312,7 +318,7 @@ struct sbp2_command_orb { struct sbp2_pointer next; struct sbp2_pointer data_descriptor; __be32 misc; - u8 command_block[12]; + u8 command_block[SBP2_MAX_CDB_SIZE]; } request; struct scsi_cmnd *cmd; scsi_done_fn_t done; @@ -1146,6 +1152,8 @@ static int sbp2_probe(struct device *dev) if (fw_device_enable_phys_dma(device) < 0) goto fail_shost_put; + shost->max_cmd_len = SBP2_MAX_CDB_SIZE; + if (scsi_add_host(shost, &unit->device) < 0) goto fail_shost_put; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3582c39f972..96dda81c922 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -79,6 +79,12 @@ config GPIO_XILINX help Say yes here to support the Xilinx FPGA GPIO device +config GPIO_VR41XX + tristate "NEC VR4100 series General-purpose I/O Uint support" + depends on CPU_VR41XX + help + Say yes here to support the NEC VR4100 series General-purpose I/O Uint + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index ef90203e8f3..9244c6fcd8b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_GPIO_PL061) += pl061.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o +obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index aa8e7cb020d..4ee4c8367a3 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -109,6 +109,16 @@ static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) writeb(!!value << offset, chip->base + (1 << (offset + 2))); } +static int pl061_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); + + if (chip->irq_base == (unsigned) -1) + return -EINVAL; + + return chip->irq_base + offset; +} + /* * PL061 GPIO IRQ */ @@ -200,7 +210,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) desc->chip->ack(irq); list_for_each(ptr, chip_list) { unsigned long pending; - int gpio; + int offset; chip = list_entry(ptr, struct pl061_gpio, list); pending = readb(chip->base + GPIOMIS); @@ -209,8 +219,8 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) if (pending == 0) continue; - for_each_bit(gpio, &pending, PL061_GPIO_NR) - generic_handle_irq(gpio_to_irq(gpio)); + for_each_bit(offset, &pending, PL061_GPIO_NR) + generic_handle_irq(pl061_to_irq(&chip->gc, offset)); } desc->chip->unmask(irq); } @@ -221,7 +231,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) struct pl061_gpio *chip; struct list_head *chip_list; int ret, irq, i; - static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)]; + static DECLARE_BITMAP(init_irq, NR_IRQS); pdata = dev->dev.platform_data; if (pdata == NULL) @@ -251,6 +261,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) chip->gc.direction_output = pl061_direction_output; chip->gc.get = pl061_get_value; chip->gc.set = pl061_set_value; + chip->gc.to_irq = pl061_to_irq; chip->gc.base = pdata->gpio_base; chip->gc.ngpio = PL061_GPIO_NR; chip->gc.label = dev_name(&dev->dev); @@ -280,6 +291,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */ chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL); if (chip_list == NULL) { + clear_bit(irq, init_irq); ret = -ENOMEM; goto iounmap; } diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c new file mode 100644 index 00000000000..b70e06133e7 --- /dev/null +++ b/drivers/gpio/vr41xx_giu.c @@ -0,0 +1,586 @@ +/* + * Driver for NEC VR4100 series General-purpose I/O Unit. + * + * Copyright (C) 2002 MontaVista Software Inc. + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/smp_lock.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/vr41xx/giu.h> +#include <asm/vr41xx/irq.h> +#include <asm/vr41xx/vr41xx.h> + +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); +MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver"); +MODULE_LICENSE("GPL"); + +#define GIUIOSELL 0x00 +#define GIUIOSELH 0x02 +#define GIUPIODL 0x04 +#define GIUPIODH 0x06 +#define GIUINTSTATL 0x08 +#define GIUINTSTATH 0x0a +#define GIUINTENL 0x0c +#define GIUINTENH 0x0e +#define GIUINTTYPL 0x10 +#define GIUINTTYPH 0x12 +#define GIUINTALSELL 0x14 +#define GIUINTALSELH 0x16 +#define GIUINTHTSELL 0x18 +#define GIUINTHTSELH 0x1a +#define GIUPODATL 0x1c +#define GIUPODATEN 0x1c +#define GIUPODATH 0x1e + #define PIOEN0 0x0100 + #define PIOEN1 0x0200 +#define GIUPODAT 0x1e +#define GIUFEDGEINHL 0x20 +#define GIUFEDGEINHH 0x22 +#define GIUREDGEINHL 0x24 +#define GIUREDGEINHH 0x26 + +#define GIUUSEUPDN 0x1e0 +#define GIUTERMUPDN 0x1e2 + +#define GPIO_HAS_PULLUPDOWN_IO 0x0001 +#define GPIO_HAS_OUTPUT_ENABLE 0x0002 +#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100 + +enum { + GPIO_INPUT, + GPIO_OUTPUT, +}; + +static DEFINE_SPINLOCK(giu_lock); +static unsigned long giu_flags; + +static void __iomem *giu_base; + +#define giu_read(offset) readw(giu_base + (offset)) +#define giu_write(offset, value) writew((value), giu_base + (offset)) + +#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE) +#define GIUINT_HIGH_OFFSET 16 +#define GIUINT_HIGH_MAX 32 + +static inline u16 giu_set(u16 offset, u16 set) +{ + u16 data; + + data = giu_read(offset); + data |= set; + giu_write(offset, data); + + return data; +} + +static inline u16 giu_clear(u16 offset, u16 clear) +{ + u16 data; + + data = giu_read(offset); + data &= ~clear; + giu_write(offset, data); + + return data; +} + +static void ack_giuint_low(unsigned int irq) +{ + giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq)); +} + +static void mask_giuint_low(unsigned int irq) +{ + giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); +} + +static void mask_ack_giuint_low(unsigned int irq) +{ + unsigned int pin; + + pin = GPIO_PIN_OF_IRQ(irq); + giu_clear(GIUINTENL, 1 << pin); + giu_write(GIUINTSTATL, 1 << pin); +} + +static void unmask_giuint_low(unsigned int irq) +{ + giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); +} + +static struct irq_chip giuint_low_irq_chip = { + .name = "GIUINTL", + .ack = ack_giuint_low, + .mask = mask_giuint_low, + .mask_ack = mask_ack_giuint_low, + .unmask = unmask_giuint_low, +}; + +static void ack_giuint_high(unsigned int irq) +{ + giu_write(GIUINTSTATH, + 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); +} + +static void mask_giuint_high(unsigned int irq) +{ + giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); +} + +static void mask_ack_giuint_high(unsigned int irq) +{ + unsigned int pin; + + pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET; + giu_clear(GIUINTENH, 1 << pin); + giu_write(GIUINTSTATH, 1 << pin); +} + +static void unmask_giuint_high(unsigned int irq) +{ + giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); +} + +static struct irq_chip giuint_high_irq_chip = { + .name = "GIUINTH", + .ack = ack_giuint_high, + .mask = mask_giuint_high, + .mask_ack = mask_ack_giuint_high, + .unmask = unmask_giuint_high, +}; + +static int giu_get_irq(unsigned int irq) +{ + u16 pendl, pendh, maskl, maskh; + int i; + + pendl = giu_read(GIUINTSTATL); + pendh = giu_read(GIUINTSTATH); + maskl = giu_read(GIUINTENL); + maskh = giu_read(GIUINTENH); + + maskl &= pendl; + maskh &= pendh; + + if (maskl) { + for (i = 0; i < 16; i++) { + if (maskl & (1 << i)) + return GIU_IRQ(i); + } + } else if (maskh) { + for (i = 0; i < 16; i++) { + if (maskh & (1 << i)) + return GIU_IRQ(i + GIUINT_HIGH_OFFSET); + } + } + + printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", + maskl, pendl, maskh, pendh); + + atomic_inc(&irq_err_count); + + return -EINVAL; +} + +void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, + irq_signal_t signal) +{ + u16 mask; + + if (pin < GIUINT_HIGH_OFFSET) { + mask = 1 << pin; + if (trigger != IRQ_TRIGGER_LEVEL) { + giu_set(GIUINTTYPL, mask); + if (signal == IRQ_SIGNAL_HOLD) + giu_set(GIUINTHTSELL, mask); + else + giu_clear(GIUINTHTSELL, mask); + if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { + switch (trigger) { + case IRQ_TRIGGER_EDGE_FALLING: + giu_set(GIUFEDGEINHL, mask); + giu_clear(GIUREDGEINHL, mask); + break; + case IRQ_TRIGGER_EDGE_RISING: + giu_clear(GIUFEDGEINHL, mask); + giu_set(GIUREDGEINHL, mask); + break; + default: + giu_set(GIUFEDGEINHL, mask); + giu_set(GIUREDGEINHL, mask); + break; + } + } + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_edge_irq); + } else { + giu_clear(GIUINTTYPL, mask); + giu_clear(GIUINTHTSELL, mask); + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_level_irq); + } + giu_write(GIUINTSTATL, mask); + } else if (pin < GIUINT_HIGH_MAX) { + mask = 1 << (pin - GIUINT_HIGH_OFFSET); + if (trigger != IRQ_TRIGGER_LEVEL) { + giu_set(GIUINTTYPH, mask); + if (signal == IRQ_SIGNAL_HOLD) + giu_set(GIUINTHTSELH, mask); + else + giu_clear(GIUINTHTSELH, mask); + if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { + switch (trigger) { + case IRQ_TRIGGER_EDGE_FALLING: + giu_set(GIUFEDGEINHH, mask); + giu_clear(GIUREDGEINHH, mask); + break; + case IRQ_TRIGGER_EDGE_RISING: + giu_clear(GIUFEDGEINHH, mask); + giu_set(GIUREDGEINHH, mask); + break; + default: + giu_set(GIUFEDGEINHH, mask); + giu_set(GIUREDGEINHH, mask); + break; + } + } + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_edge_irq); + } else { + giu_clear(GIUINTTYPH, mask); + giu_clear(GIUINTHTSELH, mask); + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_level_irq); + } + giu_write(GIUINTSTATH, mask); + } +} +EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger); + +void vr41xx_set_irq_level(unsigned int pin, irq_level_t level) +{ + u16 mask; + + if (pin < GIUINT_HIGH_OFFSET) { + mask = 1 << pin; + if (level == IRQ_LEVEL_HIGH) + giu_set(GIUINTALSELL, mask); + else + giu_clear(GIUINTALSELL, mask); + giu_write(GIUINTSTATL, mask); + } else if (pin < GIUINT_HIGH_MAX) { + mask = 1 << (pin - GIUINT_HIGH_OFFSET); + if (level == IRQ_LEVEL_HIGH) + giu_set(GIUINTALSELH, mask); + else + giu_clear(GIUINTALSELH, mask); + giu_write(GIUINTSTATH, mask); + } +} +EXPORT_SYMBOL_GPL(vr41xx_set_irq_level); + +static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir) +{ + u16 offset, mask, reg; + unsigned long flags; + + if (pin >= chip->ngpio) + return -EINVAL; + + if (pin < 16) { + offset = GIUIOSELL; + mask = 1 << pin; + } else if (pin < 32) { + offset = GIUIOSELH; + mask = 1 << (pin - 16); + } else { + if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) { + offset = GIUPODATEN; + mask = 1 << (pin - 32); + } else { + switch (pin) { + case 48: + offset = GIUPODATH; + mask = PIOEN0; + break; + case 49: + offset = GIUPODATH; + mask = PIOEN1; + break; + default: + return -EINVAL; + } + } + } + + spin_lock_irqsave(&giu_lock, flags); + + reg = giu_read(offset); + if (dir == GPIO_OUTPUT) + reg |= mask; + else + reg &= ~mask; + giu_write(offset, reg); + + spin_unlock_irqrestore(&giu_lock, flags); + + return 0; +} + +int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull) +{ + u16 reg, mask; + unsigned long flags; + + if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO) + return -EPERM; + + if (pin >= 15) + return -EINVAL; + + mask = 1 << pin; + + spin_lock_irqsave(&giu_lock, flags); + + if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) { + reg = giu_read(GIUTERMUPDN); + if (pull == GPIO_PULL_UP) + reg |= mask; + else + reg &= ~mask; + giu_write(GIUTERMUPDN, reg); + + reg = giu_read(GIUUSEUPDN); + reg |= mask; + giu_write(GIUUSEUPDN, reg); + } else { + reg = giu_read(GIUUSEUPDN); + reg &= ~mask; + giu_write(GIUUSEUPDN, reg); + } + + spin_unlock_irqrestore(&giu_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown); + +static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin) +{ + u16 reg, mask; + + if (pin >= chip->ngpio) + return -EINVAL; + + if (pin < 16) { + reg = giu_read(GIUPIODL); + mask = 1 << pin; + } else if (pin < 32) { + reg = giu_read(GIUPIODH); + mask = 1 << (pin - 16); + } else if (pin < 48) { + reg = giu_read(GIUPODATL); + mask = 1 << (pin - 32); + } else { + reg = giu_read(GIUPODATH); + mask = 1 << (pin - 48); + } + + if (reg & mask) + return 1; + + return 0; +} + +static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin, + int value) +{ + u16 offset, mask, reg; + unsigned long flags; + + if (pin >= chip->ngpio) + return; + + if (pin < 16) { + offset = GIUPIODL; + mask = 1 << pin; + } else if (pin < 32) { + offset = GIUPIODH; + mask = 1 << (pin - 16); + } else if (pin < 48) { + offset = GIUPODATL; + mask = 1 << (pin - 32); + } else { + offset = GIUPODATH; + mask = 1 << (pin - 48); + } + + spin_lock_irqsave(&giu_lock, flags); + + reg = giu_read(offset); + if (value) + reg |= mask; + else + reg &= ~mask; + giu_write(offset, reg); + + spin_unlock_irqrestore(&giu_lock, flags); +} + + +static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return giu_set_direction(chip, offset, GPIO_INPUT); +} + +static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + vr41xx_gpio_set(chip, offset, value); + + return giu_set_direction(chip, offset, GPIO_OUTPUT); +} + +static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset >= chip->ngpio) + return -EINVAL; + + return GIU_IRQ_BASE + offset; +} + +static struct gpio_chip vr41xx_gpio_chip = { + .label = "vr41xx", + .owner = THIS_MODULE, + .direction_input = vr41xx_gpio_direction_input, + .get = vr41xx_gpio_get, + .direction_output = vr41xx_gpio_direction_output, + .set = vr41xx_gpio_set, + .to_irq = vr41xx_gpio_to_irq, +}; + +static int __devinit giu_probe(struct platform_device *pdev) +{ + struct resource *res; + unsigned int trigger, i, pin; + struct irq_chip *chip; + int irq, retval; + + switch (pdev->id) { + case GPIO_50PINS_PULLUPDOWN: + giu_flags = GPIO_HAS_PULLUPDOWN_IO; + vr41xx_gpio_chip.ngpio = 50; + break; + case GPIO_36PINS: + vr41xx_gpio_chip.ngpio = 36; + break; + case GPIO_48PINS_EDGE_SELECT: + giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT; + vr41xx_gpio_chip.ngpio = 48; + break; + default: + dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EBUSY; + + giu_base = ioremap(res->start, res->end - res->start + 1); + if (!giu_base) + return -ENOMEM; + + vr41xx_gpio_chip.dev = &pdev->dev; + + retval = gpiochip_add(&vr41xx_gpio_chip); + + giu_write(GIUINTENL, 0); + giu_write(GIUINTENH, 0); + + trigger = giu_read(GIUINTTYPH) << 16; + trigger |= giu_read(GIUINTTYPL); + for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { + pin = GPIO_PIN_OF_IRQ(i); + if (pin < GIUINT_HIGH_OFFSET) + chip = &giuint_low_irq_chip; + else + chip = &giuint_high_irq_chip; + + if (trigger & (1 << pin)) + set_irq_chip_and_handler(i, chip, handle_edge_irq); + else + set_irq_chip_and_handler(i, chip, handle_level_irq); + + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0 || irq >= nr_irqs) + return -EBUSY; + + return cascade_irq(irq, giu_get_irq); +} + +static int __devexit giu_remove(struct platform_device *pdev) +{ + if (giu_base) { + iounmap(giu_base); + giu_base = NULL; + } + + return 0; +} + +static struct platform_driver giu_device_driver = { + .probe = giu_probe, + .remove = __devexit_p(giu_remove), + .driver = { + .name = "GIU", + .owner = THIS_MODULE, + }, +}; + +static int __init vr41xx_giu_init(void) +{ + return platform_driver_register(&giu_device_driver); +} + +static void __exit vr41xx_giu_exit(void) +{ + platform_driver_unregister(&giu_device_driver); +} + +module_init(vr41xx_giu_init); +module_exit(vr41xx_giu_exit); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index c961fe415ae..39b393d38bb 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -81,6 +81,7 @@ config DRM_I830 config DRM_I915 tristate "i915 driver" + depends on AGP_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4e89ab08b7b..fe23f29f7cb 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -16,6 +16,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm-$(CONFIG_COMPAT) += drm_ioc32.o obj-$(CONFIG_DRM) += drm.o +obj-$(CONFIG_DRM_TTM) += ttm/ obj-$(CONFIG_DRM_TDFX) += tdfx/ obj-$(CONFIG_DRM_R128) += r128/ obj-$(CONFIG_DRM_RADEON)+= radeon/ @@ -26,4 +27,3 @@ obj-$(CONFIG_DRM_I915) += i915/ obj-$(CONFIG_DRM_SIS) += sis/ obj-$(CONFIG_DRM_SAVAGE)+= savage/ obj-$(CONFIG_DRM_VIA) +=via/ -obj-$(CONFIG_DRM_TTM) += ttm/ diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 7d0835226f6..80cc6d06d61 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -294,10 +294,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo; unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo; unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo; - unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo; - unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo; - unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf); - unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4; + unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo; + unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo; + unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4; + unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf); /* ignore tiny modes */ if (hactive < 64 || vactive < 64) @@ -347,8 +347,8 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; - mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; - mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; + mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; + mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; if (quirks & EDID_QUIRK_DETAILED_IN_CM) { mode->width_mm *= 10; diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 51c5a050aa7..30d6b99fb30 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -13,6 +13,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ intel_crt.o \ intel_lvds.o \ intel_bios.o \ + intel_dp.o \ + intel_dp_i2c.o \ intel_hdmi.o \ intel_sdvo.o \ intel_modes.o \ diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h index e747ac42fe3..288fc50627e 100644 --- a/drivers/gpu/drm/i915/dvo.h +++ b/drivers/gpu/drm/i915/dvo.h @@ -37,7 +37,7 @@ struct intel_dvo_device { /* GPIO register used for i2c bus to control this device */ u32 gpio; int slave_addr; - struct intel_i2c_chan *i2c_bus; + struct i2c_adapter *i2c_bus; const struct intel_dvo_dev_ops *dev_ops; void *dev_priv; @@ -52,7 +52,7 @@ struct intel_dvo_dev_ops { * Returns NULL if the device does not exist. */ bool (*init)(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus); + struct i2c_adapter *i2cbus); /* * Called to allow the output a chance to create properties after the diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c index 03d4b4973b0..621815b531d 100644 --- a/drivers/gpu/drm/i915/dvo_ch7017.c +++ b/drivers/gpu/drm/i915/dvo_ch7017.c @@ -176,19 +176,20 @@ static void ch7017_dpms(struct intel_dvo_device *dvo, int mode); static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) { - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -208,10 +209,11 @@ static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) { - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -228,8 +230,9 @@ static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) /** Probes for a CH7017 on the given bus and slave address. */ static bool ch7017_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); struct ch7017_priv *priv; uint8_t val; @@ -237,8 +240,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo, if (priv == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = priv; if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val)) @@ -248,7 +250,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo, val != CH7018_DEVICE_ID_VALUE && val != CH7019_DEVICE_ID_VALUE) { DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n", - val, i2cbus->adapter.name,i2cbus->slave_addr); + val, i2cbus->adapter.name,dvo->slave_addr); goto fail; } diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index d2fd95dbd03..a9b89628968 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -123,19 +123,20 @@ static char *ch7xxx_get_id(uint8_t vid) static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct ch7xxx_priv *ch7xxx= dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -152,7 +153,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!ch7xxx->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -161,10 +162,11 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct ch7xxx_priv *ch7xxx = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -178,14 +180,14 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!ch7xxx->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } static bool ch7xxx_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the CH7xxx chip on the specified i2c bus */ struct ch7xxx_priv *ch7xxx; @@ -196,8 +198,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, if (ch7xxx == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = ch7xxx; ch7xxx->quiet = true; @@ -207,7 +208,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, name = ch7xxx_get_id(vendor); if (!name) { DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", - vendor, i2cbus->adapter.name, i2cbus->slave_addr); + vendor, adapter->name, dvo->slave_addr); goto out; } @@ -217,7 +218,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, if (device != CH7xxx_DID) { DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", - vendor, i2cbus->adapter.name, i2cbus->slave_addr); + vendor, adapter->name, dvo->slave_addr); goto out; } diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c index 0c8d375e8e3..aa176f9921f 100644 --- a/drivers/gpu/drm/i915/dvo_ivch.c +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -169,13 +169,14 @@ static void ivch_dump_regs(struct intel_dvo_device *dvo); static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) { struct ivch_priv *priv = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[1]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 0, }, @@ -186,7 +187,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD | I2C_M_NOSTART, .len = 2, .buf = in_buf, @@ -202,7 +203,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) if (!priv->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -211,10 +212,11 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) { struct ivch_priv *priv = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[3]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 3, .buf = out_buf, @@ -229,7 +231,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) if (!priv->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -237,7 +239,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) /** Probes the given bus and slave address for an ivch */ static bool ivch_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { struct ivch_priv *priv; uint16_t temp; @@ -246,8 +248,7 @@ static bool ivch_init(struct intel_dvo_device *dvo, if (priv == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = priv; priv->quiet = true; diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c index 033a4bb070b..e1c1f7341e5 100644 --- a/drivers/gpu/drm/i915/dvo_sil164.c +++ b/drivers/gpu/drm/i915/dvo_sil164.c @@ -76,19 +76,20 @@ struct sil164_priv { static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct sil164_priv *sil = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -105,7 +106,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!sil->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -113,10 +114,11 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct sil164_priv *sil= dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -130,7 +132,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!sil->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -138,7 +140,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) /* Silicon Image 164 driver for chip on i2c bus */ static bool sil164_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the SIL164 chip on the specified i2c bus */ struct sil164_priv *sil; @@ -148,8 +150,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (sil == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = sil; sil->quiet = true; @@ -158,7 +159,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (ch != (SIL164_VID & 0xff)) { DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", - ch, i2cbus->adapter.name, i2cbus->slave_addr); + ch, adapter->name, dvo->slave_addr); goto out; } @@ -167,7 +168,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (ch != (SIL164_DID & 0xff)) { DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", - ch, i2cbus->adapter.name, i2cbus->slave_addr); + ch, adapter->name, dvo->slave_addr); goto out; } sil->quiet = false; diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c index 207fda806eb..9ecc907384e 100644 --- a/drivers/gpu/drm/i915/dvo_tfp410.c +++ b/drivers/gpu/drm/i915/dvo_tfp410.c @@ -101,19 +101,20 @@ struct tfp410_priv { static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct tfp410_priv *tfp = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -130,7 +131,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!tfp->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -138,10 +139,11 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct tfp410_priv *tfp = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -155,7 +157,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!tfp->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -174,7 +176,7 @@ static int tfp410_getid(struct intel_dvo_device *dvo, int addr) /* Ti TFP410 driver for chip on i2c bus */ static bool tfp410_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the tfp410 chip on the specified i2c bus */ struct tfp410_priv *tfp; @@ -184,20 +186,19 @@ static bool tfp410_init(struct intel_dvo_device *dvo, if (tfp == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = tfp; tfp->quiet = true; if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n", - id, i2cbus->adapter.name, i2cbus->slave_addr); + id, adapter->name, dvo->slave_addr); goto out; } if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n", - id, i2cbus->adapter.name, i2cbus->slave_addr); + id, adapter->name, dvo->slave_addr); goto out; } tfp->quiet = false; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 98560e1e899..e3cb4025e32 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -67,8 +67,6 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) pci_save_state(dev->pdev); - i915_save_state(dev); - /* If KMS is active, we do the leavevt stuff here */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { if (i915_gem_idle(dev)) @@ -77,6 +75,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) drm_irq_uninstall(dev); } + i915_save_state(dev); + intel_opregion_free(dev, 1); if (state.event == PM_EVENT_SUSPEND) { diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7a84f04e843..bb4c2d387b6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -306,6 +306,17 @@ typedef struct drm_i915_private { u32 saveCURBPOS; u32 saveCURBBASE; u32 saveCURSIZE; + u32 saveDP_B; + u32 saveDP_C; + u32 saveDP_D; + u32 savePIPEA_GMCH_DATA_M; + u32 savePIPEB_GMCH_DATA_M; + u32 savePIPEA_GMCH_DATA_N; + u32 savePIPEB_GMCH_DATA_N; + u32 savePIPEA_DP_LINK_M; + u32 savePIPEB_DP_LINK_M; + u32 savePIPEA_DP_LINK_N; + u32 savePIPEB_DP_LINK_N; struct { struct drm_mm gtt_space; @@ -857,6 +868,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ IS_I915GM(dev))) #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) +#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index fd2b8bdffe3..876b65cb762 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1006,7 +1006,7 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF - DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", + DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n", obj, obj->size, read_domains, write_domain); #endif if (read_domains & I915_GEM_DOMAIN_GTT) { @@ -1050,7 +1050,7 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, } #if WATCH_BUF - DRM_INFO("%s: sw_finish %d (%p %d)\n", + DRM_INFO("%s: sw_finish %d (%p %zd)\n", __func__, args->handle, obj, obj->size); #endif obj_priv = obj->driver_private; @@ -2423,7 +2423,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) } #if WATCH_BUF - DRM_INFO("Binding object of size %d at 0x%08x\n", + DRM_INFO("Binding object of size %zd at 0x%08x\n", obj->size, obj_priv->gtt_offset); #endif ret = i915_gem_object_get_pages(obj); @@ -4227,6 +4227,7 @@ i915_gem_lastclose(struct drm_device *dev) void i915_gem_load(struct drm_device *dev) { + int i; drm_i915_private_t *dev_priv = dev->dev_private; spin_lock_init(&dev_priv->mm.active_list_lock); @@ -4246,6 +4247,18 @@ i915_gem_load(struct drm_device *dev) else dev_priv->num_fence_regs = 8; + /* Initialize fence registers to zero */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0); + } else { + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_830_0 + (i * 4), 0); + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_945_8 + (i * 4), 0); + } + i915_gem_detect_bit_6_swizzle(dev); } diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c index 8d0b943e2c5..e602614bd3f 100644 --- a/drivers/gpu/drm/i915/i915_gem_debug.c +++ b/drivers/gpu/drm/i915/i915_gem_debug.c @@ -87,7 +87,7 @@ i915_gem_dump_object(struct drm_gem_object *obj, int len, chunk_len = page_len - chunk; if (chunk_len > 128) chunk_len = 128; - i915_gem_dump_page(obj_priv->page_list[page], + i915_gem_dump_page(obj_priv->pages[page], chunk, chunk + chunk_len, obj_priv->gtt_offset + page * PAGE_SIZE, @@ -143,7 +143,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) uint32_t *backing_map = NULL; int bad_count = 0; - DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n", + DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n", __func__, obj, obj_priv->gtt_offset, handle, obj->size / 1024); @@ -157,7 +157,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) for (page = 0; page < obj->size / PAGE_SIZE; page++) { int i; - backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0); + backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0); if (backing_map == NULL) { DRM_ERROR("failed to map backing page\n"); diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 5c1ceec49f5..daeae62e1c2 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -114,11 +114,13 @@ intel_alloc_mchbar_resource(struct drm_device *dev) mchbar_addr = ((u64)temp_hi << 32) | temp_lo; /* If ACPI doesn't have it, assume we need to allocate it ourselves */ +#ifdef CONFIG_PNP if (mchbar_addr && pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) { ret = 0; goto out_put; } +#endif /* Get some space for it */ ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res, diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b86b7b7130c..228546f6eaa 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -232,7 +232,17 @@ static void i915_hotplug_work_func(struct work_struct *work) drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, hotplug_work); struct drm_device *dev = dev_priv->dev; - + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + if (mode_config->num_connector) { + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->hot_plug) + (*intel_output->hot_plug) (intel_output); + } + } /* Just fire off a uevent and let userspace tell us what to do */ drm_sysfs_hotplug_event(dev); } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f6237a0b113..88bf7521405 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -569,6 +569,19 @@ #define C0DRB3 0x10206 #define C1DRB3 0x10606 +/* Clocking configuration register */ +#define CLKCFG 0x10c00 +#define CLKCFG_FSB_400 (0 << 0) /* hrawclk 100 */ +#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ +#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ +#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ +#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ +#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ +/* this is a guess, could be 5 as well */ +#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_1600_ALT (5 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_MASK (7 << 0) + /** GM965 GM45 render standby register */ #define MCHBAR_RENDER_STANDBY 0x111B8 @@ -834,9 +847,25 @@ #define HORIZ_INTERP_MASK (3 << 6) #define HORIZ_AUTO_SCALE (1 << 5) #define PANEL_8TO6_DITHER_ENABLE (1 << 3) +#define PFIT_FILTER_FUZZY (0 << 24) +#define PFIT_SCALING_AUTO (0 << 26) +#define PFIT_SCALING_PROGRAMMED (1 << 26) +#define PFIT_SCALING_PILLAR (2 << 26) +#define PFIT_SCALING_LETTER (3 << 26) #define PFIT_PGM_RATIOS 0x61234 #define PFIT_VERT_SCALE_MASK 0xfff00000 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* Pre-965 */ +#define PFIT_VERT_SCALE_SHIFT 20 +#define PFIT_VERT_SCALE_MASK 0xfff00000 +#define PFIT_HORIZ_SCALE_SHIFT 4 +#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* 965+ */ +#define PFIT_VERT_SCALE_SHIFT_965 16 +#define PFIT_VERT_SCALE_MASK_965 0x1fff0000 +#define PFIT_HORIZ_SCALE_SHIFT_965 0 +#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff + #define PFIT_AUTO_RATIOS 0x61238 /* Backlight control */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index a98e2831ed3..8d8e083d14a 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -322,6 +322,20 @@ int i915_save_state(struct drm_device *dev) dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + dev_priv->saveDP_B = I915_READ(DP_B); + dev_priv->saveDP_C = I915_READ(DP_C); + dev_priv->saveDP_D = I915_READ(DP_D); + dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M); + dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M); + dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N); + dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N); + dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M); + dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M); + dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N); + dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N); + } /* FIXME: save TV & SDVO state */ /* FBC state */ @@ -404,7 +418,19 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 8; i++) I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); } - + + /* Display port ratios (must be done before clock is set) */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M); + I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M); + I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N); + I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N); + I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M); + I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M); + I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); + I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { @@ -518,6 +544,12 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(DP_B, dev_priv->saveDP_B); + I915_WRITE(DP_C, dev_priv->saveDP_C); + I915_WRITE(DP_D, dev_priv->saveDP_D); + } /* FIXME: restore TV & SDVO state */ /* FBC info */ diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index cdd126d068a..716409a5724 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -99,9 +99,11 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, { struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; + struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; struct bdb_lvds_lfp_data_entry *entry; struct lvds_dvo_timing *dvo_timing; struct drm_display_mode *panel_fixed_mode; + int lfp_data_size; /* Defaults if we can't find VBT info */ dev_priv->lvds_dither = 0; @@ -119,9 +121,17 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, if (!lvds_lfp_data) return; + lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); + if (!lvds_lfp_data_ptrs) + return; + dev_priv->lvds_vbt = 1; - entry = &lvds_lfp_data->data[lvds_options->panel_type]; + lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; + entry = (struct bdb_lvds_lfp_data_entry *) + ((uint8_t *)lvds_lfp_data->data + (lfp_data_size * + lvds_options->panel_type)); dvo_timing = &entry->dvo_timing; panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3e1c7816211..73e7b9cecac 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -29,6 +29,7 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" +#include "intel_dp.h" #include "drm_crtc_helper.h" @@ -127,19 +128,6 @@ struct intel_limit { #define I9XX_P2_LVDS_FAST 7 #define I9XX_P2_LVDS_SLOW_LIMIT 112000 -#define INTEL_LIMIT_I8XX_DVO_DAC 0 -#define INTEL_LIMIT_I8XX_LVDS 1 -#define INTEL_LIMIT_I9XX_SDVO_DAC 2 -#define INTEL_LIMIT_I9XX_LVDS 3 -#define INTEL_LIMIT_G4X_SDVO 4 -#define INTEL_LIMIT_G4X_HDMI_DAC 5 -#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6 -#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7 -#define INTEL_LIMIT_IGD_SDVO_DAC 8 -#define INTEL_LIMIT_IGD_LVDS 9 -#define INTEL_LIMIT_IGDNG_SDVO_DAC 10 -#define INTEL_LIMIT_IGDNG_LVDS 11 - /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 #define G4X_DOT_SDVO_MAX 270000 @@ -218,6 +206,25 @@ struct intel_limit { #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 +/*The parameter is for DISPLAY PORT on G4x platform*/ +#define G4X_DOT_DISPLAY_PORT_MIN 161670 +#define G4X_DOT_DISPLAY_PORT_MAX 227000 +#define G4X_N_DISPLAY_PORT_MIN 1 +#define G4X_N_DISPLAY_PORT_MAX 2 +#define G4X_M_DISPLAY_PORT_MIN 97 +#define G4X_M_DISPLAY_PORT_MAX 108 +#define G4X_M1_DISPLAY_PORT_MIN 0x10 +#define G4X_M1_DISPLAY_PORT_MAX 0x12 +#define G4X_M2_DISPLAY_PORT_MIN 0x05 +#define G4X_M2_DISPLAY_PORT_MAX 0x06 +#define G4X_P_DISPLAY_PORT_MIN 10 +#define G4X_P_DISPLAY_PORT_MAX 20 +#define G4X_P1_DISPLAY_PORT_MIN 1 +#define G4X_P1_DISPLAY_PORT_MAX 2 +#define G4X_P2_DISPLAY_PORT_SLOW 10 +#define G4X_P2_DISPLAY_PORT_FAST 10 +#define G4X_P2_DISPLAY_PORT_LIMIT 0 + /* IGDNG */ /* as we calculate clock using (register_value + 2) for N/M1/M2, so here the range value for them is (actual_value-2). @@ -256,8 +263,11 @@ static bool intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); -static const intel_limit_t intel_limits[] = { - { /* INTEL_LIMIT_I8XX_DVO_DAC */ +static bool +intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock); + +static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, @@ -269,8 +279,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I8XX_LVDS */ +}; + +static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, @@ -282,8 +293,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I9XX_SDVO_DAC */ +}; + +static const intel_limit_t intel_limits_i9xx_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, @@ -295,8 +307,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I9XX_LVDS */ +}; + +static const intel_limit_t intel_limits_i9xx_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, @@ -311,9 +324,10 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - }, +}; + /* below parameter and function is for G4X Chipset Family*/ - { /* INTEL_LIMIT_G4X_SDVO */ +static const intel_limit_t intel_limits_g4x_sdvo = { .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX }, @@ -327,8 +341,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_SDVO_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_HDMI_DAC */ +}; + +static const intel_limit_t intel_limits_g4x_hdmi = { .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX }, @@ -342,8 +357,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_HDMI_DAC_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */ +}; + +static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -365,8 +381,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */ +}; + +static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN, .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -388,8 +405,32 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_IGD_SDVO */ +}; + +static const intel_limit_t intel_limits_g4x_display_port = { + .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, + .max = G4X_DOT_DISPLAY_PORT_MAX }, + .vco = { .min = G4X_VCO_MIN, + .max = G4X_VCO_MAX}, + .n = { .min = G4X_N_DISPLAY_PORT_MIN, + .max = G4X_N_DISPLAY_PORT_MAX }, + .m = { .min = G4X_M_DISPLAY_PORT_MIN, + .max = G4X_M_DISPLAY_PORT_MAX }, + .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN, + .max = G4X_M1_DISPLAY_PORT_MAX }, + .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN, + .max = G4X_M2_DISPLAY_PORT_MAX }, + .p = { .min = G4X_P_DISPLAY_PORT_MIN, + .max = G4X_P_DISPLAY_PORT_MAX }, + .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN, + .max = G4X_P1_DISPLAY_PORT_MAX}, + .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT, + .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, + .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, + .find_pll = intel_find_pll_g4x_dp, +}; + +static const intel_limit_t intel_limits_igd_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, .n = { .min = IGD_N_MIN, .max = IGD_N_MAX }, @@ -401,8 +442,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_IGD_LVDS */ +}; + +static const intel_limit_t intel_limits_igd_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, .n = { .min = IGD_N_MIN, .max = IGD_N_MAX }, @@ -415,8 +457,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_IGDNG_SDVO_DAC */ +}; + +static const intel_limit_t intel_limits_igdng_sdvo = { .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, @@ -429,8 +472,9 @@ static const intel_limit_t intel_limits[] = { .p2_slow = IGDNG_P2_SDVO_DAC_SLOW, .p2_fast = IGDNG_P2_SDVO_DAC_FAST }, .find_pll = intel_igdng_find_best_PLL, - }, - { /* INTEL_LIMIT_IGDNG_LVDS */ +}; + +static const intel_limit_t intel_limits_igdng_lvds = { .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, @@ -443,16 +487,15 @@ static const intel_limit_t intel_limits[] = { .p2_slow = IGDNG_P2_LVDS_SLOW, .p2_fast = IGDNG_P2_LVDS_FAST }, .find_pll = intel_igdng_find_best_PLL, - }, }; static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc) { const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS]; + limit = &intel_limits_igdng_lvds; else - limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC]; + limit = &intel_limits_igdng_sdvo; return limit; } @@ -467,19 +510,19 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) /* LVDS with dual channel */ - limit = &intel_limits - [INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS]; + limit = &intel_limits_g4x_dual_channel_lvds; else /* LVDS with dual channel */ - limit = &intel_limits - [INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS]; + limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { - limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC]; + limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { - limit = &intel_limits[INTEL_LIMIT_G4X_SDVO]; + limit = &intel_limits_g4x_sdvo; + } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { + limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ - limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + limit = &intel_limits_i9xx_sdvo; return limit; } @@ -495,19 +538,19 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) limit = intel_g4x_limit(crtc); } else if (IS_I9XX(dev) && !IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + limit = &intel_limits_i9xx_lvds; else - limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + limit = &intel_limits_i9xx_sdvo; } else if (IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_IGD_LVDS]; + limit = &intel_limits_igd_lvds; else - limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC]; + limit = &intel_limits_igd_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + limit = &intel_limits_i8xx_lvds; else - limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + limit = &intel_limits_i8xx_dvo; } return limit; } @@ -764,6 +807,35 @@ out: return found; } +/* DisplayPort has only two frequencies, 162MHz and 270MHz */ +static bool +intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock) +{ + intel_clock_t clock; + if (target < 200000) { + clock.dot = 161670; + clock.p = 20; + clock.p1 = 2; + clock.p2 = 10; + clock.n = 0x01; + clock.m = 97; + clock.m1 = 0x10; + clock.m2 = 0x05; + } else { + clock.dot = 270000; + clock.p = 10; + clock.p1 = 1; + clock.p2 = 10; + clock.n = 0x02; + clock.m = 108; + clock.m1 = 0x12; + clock.m2 = 0x06; + } + memcpy(best_clock, &clock, sizeof(intel_clock_t)); + return true; +} + void intel_wait_for_vblank(struct drm_device *dev) { @@ -1541,7 +1613,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; + bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; const intel_limit_t *limit; @@ -1585,6 +1657,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_ANALOG: is_crt = true; break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; } num_outputs++; @@ -1600,6 +1675,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else { refclk = 48000; } + /* * Returns a set of divisors for the desired target clock with the given @@ -1662,6 +1738,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, else if (IS_IGDNG(dev)) dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } + if (is_dp) + dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_IGD(dev)) @@ -1809,6 +1887,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } + if (is_dp) + intel_dp_set_m_n(crtc, mode, adjusted_mode); I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); @@ -2475,6 +2555,8 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_B); } /* Before G4X SDVOC doesn't have its own detect register */ @@ -2487,7 +2569,11 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOC); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOC); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_C); } + if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) + intel_dp_init(dev, DP_D); } else intel_dvo_init(dev); @@ -2530,6 +2616,11 @@ static void intel_setup_outputs(struct drm_device *dev) (1 << 1)); clone_mask = (1 << INTEL_OUTPUT_TVOUT); break; + case INTEL_OUTPUT_DISPLAYPORT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT); + break; } encoder->possible_crtcs = crtc_mask; encoder->possible_clones = intel_connector_clones(dev, clone_mask); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c new file mode 100644 index 00000000000..8f8d37d5663 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -0,0 +1,1153 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_dp.h" + +#define DP_LINK_STATUS_SIZE 6 +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +struct intel_dp_priv { + uint32_t output_reg; + uint32_t DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + uint32_t save_DP; + uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE]; + bool has_audio; + int dpms_mode; + uint8_t link_bw; + uint8_t lane_count; + uint8_t dpcd[4]; + struct intel_output *intel_output; + struct i2c_adapter adapter; + struct i2c_algo_dp_aux_data algo; +}; + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]); + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP); + +static int +intel_dp_max_lane_count(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_lane_count = 4; + + if (dp_priv->dpcd[0] >= 0x11) { + max_lane_count = dp_priv->dpcd[2] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; + } + } + return max_lane_count; +} + +static int +intel_dp_max_link_bw(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_link_bw = dp_priv->dpcd[1]; + + switch (max_link_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + default: + max_link_bw = DP_LINK_BW_1_62; + break; + } + return max_link_bw; +} + +static int +intel_dp_link_clock(uint8_t link_bw) +{ + if (link_bw == DP_LINK_BW_2_7) + return 270000; + else + return 162000; +} + +/* I think this is a fiction */ +static int +intel_dp_link_required(int pixel_clock) +{ + return pixel_clock * 3; +} + +static int +intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output)); + int max_lanes = intel_dp_max_lane_count(intel_output); + + if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes) + return MODE_CLOCK_HIGH; + + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +static void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +/* hrawclock is 1/4 the FSB frequency */ +static int +intel_hrawclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t clkcfg; + + clkcfg = I915_READ(CLKCFG); + switch (clkcfg & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_400: + return 100; + case CLKCFG_FSB_533: + return 133; + case CLKCFG_FSB_667: + return 166; + case CLKCFG_FSB_800: + return 200; + case CLKCFG_FSB_1067: + return 266; + case CLKCFG_FSB_1333: + return 333; + /* these two are just a guess; one of them might be right */ + case CLKCFG_FSB_1600: + case CLKCFG_FSB_1600_ALT: + return 400; + default: + return 133; + } +} + +static int +intel_dp_aux_ch(struct intel_output *intel_output, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t output_reg = dp_priv->output_reg; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t ctl; + uint32_t status; + uint32_t aux_clock_divider; + int try; + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. So, take the + * hrawclk value and divide by 2 and use that + */ + aux_clock_divider = intel_hrawclk(dev) / 2; + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) { + uint32_t d = pack_aux(send + i, send_bytes - i);; + + I915_WRITE(ch_data + i, d); + } + + ctl = (DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + /* Send the command and wait for it to complete */ + I915_WRITE(ch_ctl, ctl); + (void) I915_READ(ch_ctl); + for (;;) { + udelay(100); + status = I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + } + + /* Clear done status and any errors */ + I915_WRITE(ch_ctl, (ctl | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)); + (void) I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0) + break; + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); + return -EBUSY; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status); + return -EIO; + } + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status); + return -ETIMEDOUT; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) { + uint32_t d = I915_READ(ch_data + i); + + unpack_aux(d, recv + i, recv_bytes - i); + } + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +intel_dp_aux_native_write(struct intel_output *intel_output, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +intel_dp_aux_native_write_1(struct intel_output *intel_output, + uint16_t address, uint8_t byte) +{ + return intel_dp_aux_native_write(intel_output, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +intel_dp_aux_native_read(struct intel_output *intel_output, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, + reply, reply_bytes); + if (ret == 0) + return -EPROTO; + if (ret < 0) + return ret; + ack = reply[0]; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } +} + +static int +intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes) +{ + struct intel_dp_priv *dp_priv = container_of(adapter, + struct intel_dp_priv, + adapter); + struct intel_output *intel_output = dp_priv->intel_output; + + return intel_dp_aux_ch(intel_output, + send, send_bytes, recv, recv_bytes); +} + +static int +intel_dp_i2c_init(struct intel_output *intel_output, const char *name) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + DRM_ERROR("i2c_init %s\n", name); + dp_priv->algo.running = false; + dp_priv->algo.address = 0; + dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; + + memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter)); + dp_priv->adapter.owner = THIS_MODULE; + dp_priv->adapter.class = I2C_CLASS_DDC; + strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1); + dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0'; + dp_priv->adapter.algo_data = &dp_priv->algo; + dp_priv->adapter.dev.parent = &intel_output->base.kdev; + + return i2c_dp_aux_add_bus(&dp_priv->adapter); +} + +static bool +intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int lane_count, clock; + int max_lane_count = intel_dp_max_lane_count(intel_output); + int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0; + static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = 0; clock <= max_clock; clock++) { + int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; + + if (intel_dp_link_required(mode->clock) <= link_avail) { + dp_priv->link_bw = bws[clock]; + dp_priv->lane_count = lane_count; + adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); + printk(KERN_ERR "link bw %02x lane count %d clock %d\n", + dp_priv->link_bw, dp_priv->lane_count, + adjusted_mode->clock); + return true; + } + } + } + return false; +} + +struct intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + } +} + +static void +intel_dp_compute_m_n(int bytes_per_pixel, + int nlanes, + int pixel_clock, + int link_clock, + struct intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = pixel_clock * bytes_per_pixel; + m_n->gmch_n = link_clock * nlanes; + intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int lane_count = 4; + struct intel_dp_m_n m_n; + + /* + * Find the lane count in the intel_output private + */ + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) { + lane_count = dp_priv->lane_count; + break; + } + } + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + intel_dp_compute_m_n(3, lane_count, + mode->clock, adjusted_mode->clock, &m_n); + + if (intel_crtc->pipe == 0) { + I915_WRITE(PIPEA_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEA_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); + } else { + I915_WRITE(PIPEB_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEB_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); + } +} + +static void +intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_crtc *crtc = intel_output->enc.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + dp_priv->DP = (DP_LINK_TRAIN_OFF | + DP_VOLTAGE_0_4 | + DP_PRE_EMPHASIS_0 | + DP_SYNC_VS_HIGH | + DP_SYNC_HS_HIGH); + + switch (dp_priv->lane_count) { + case 1: + dp_priv->DP |= DP_PORT_WIDTH_1; + break; + case 2: + dp_priv->DP |= DP_PORT_WIDTH_2; + break; + case 4: + dp_priv->DP |= DP_PORT_WIDTH_4; + break; + } + if (dp_priv->has_audio) + dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE; + + memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + dp_priv->link_configuration[0] = dp_priv->link_bw; + dp_priv->link_configuration[1] = dp_priv->lane_count; + + /* + * Check for DPCD version > 1.1, + * enable enahanced frame stuff in that case + */ + if (dp_priv->dpcd[0] >= 0x11) { + dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + dp_priv->DP |= DP_ENHANCED_FRAMING; + } + + if (intel_crtc->pipe == 1) + dp_priv->DP |= DP_PIPEB_SELECT; +} + + +static void +intel_dp_dpms(struct drm_encoder *encoder, int mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dp_reg = I915_READ(dp_priv->output_reg); + + if (mode != DRM_MODE_DPMS_ON) { + if (dp_reg & DP_PORT_EN) + intel_dp_link_down(intel_output, dp_priv->DP); + } else { + if (!(dp_reg & DP_PORT_EN)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); + } + dp_priv->dpms_mode = mode; +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +intel_dp_get_link_status(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + int ret; + + ret = intel_dp_aux_native_read(intel_output, + DP_LANE0_1_STATUS, + link_status, DP_LINK_STATUS_SIZE); + if (ret != DP_LINK_STATUS_SIZE) + return false; + return true; +} + +static uint8_t +intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +static void +intel_dp_save(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + dp_priv->save_DP = I915_READ(dp_priv->output_reg); + intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET, + dp_priv->save_link_configuration, + sizeof (dp_priv->save_link_configuration)); +} + +static uint8_t +intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} + + +#if 0 +static char *voltage_names[] = { + "0.4V", "0.6V", "0.8V", "1.2V" +}; +static char *pre_emph_names[] = { + "0dB", "3.5dB", "6dB", "9.5dB" +}; +static char *link_train_names[] = { + "pattern 1", "pattern 2", "idle", "off" +}; +#endif + +/* + * These are source-specific values; current Intel hardware supports + * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB + */ +#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 + +static uint8_t +intel_dp_pre_emphasis_max(uint8_t voltage_swing) +{ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } +} + +static void +intel_get_adjust_train(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane_count, + uint8_t train_set[4]) +{ + uint8_t v = 0; + uint8_t p = 0; + int lane; + + for (lane = 0; lane < lane_count; lane++) { + uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + if (v >= I830_DP_VOLTAGE_MAX) + v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + + if (p >= intel_dp_pre_emphasis_max(v)) + p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (lane = 0; lane < 4; lane++) + train_set[lane] = v | p; +} + +static uint32_t +intel_dp_signal_levels(uint8_t train_set, int lane_count) +{ + uint32_t signal_levels = 0; + + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + default: + signal_levels |= DP_VOLTAGE_0_4; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + signal_levels |= DP_VOLTAGE_0_6; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + signal_levels |= DP_VOLTAGE_0_8; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + signal_levels |= DP_VOLTAGE_1_2; + break; + } + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + default: + signal_levels |= DP_PRE_EMPHASIS_0; + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + signal_levels |= DP_PRE_EMPHASIS_3_5; + break; + case DP_TRAIN_PRE_EMPHASIS_6: + signal_levels |= DP_PRE_EMPHASIS_6; + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + signal_levels |= DP_PRE_EMPHASIS_9_5; + break; + } + return signal_levels; +} + +static uint8_t +intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + uint8_t l = intel_dp_link_status(link_status, i); + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static bool +intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return false; + } + return true; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ + DP_LANE_CHANNEL_EQ_DONE|\ + DP_LANE_SYMBOL_LOCKED) +static bool +intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = intel_dp_link_status(link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return false; + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return false; + } + return true; +} + +static bool +intel_dp_set_link_train(struct intel_output *intel_output, + uint32_t dp_reg_value, + uint8_t dp_train_pat, + uint8_t train_set[4], + bool first) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int ret; + + I915_WRITE(dp_priv->output_reg, dp_reg_value); + POSTING_READ(dp_priv->output_reg); + if (first) + intel_wait_for_vblank(dev); + + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + ret = intel_dp_aux_native_write(intel_output, + DP_TRAINING_LANE0_SET, train_set, 4); + if (ret != 4) + return false; + + return true; +} + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t train_set[4]; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + int i; + uint8_t voltage; + bool clock_recovery = false; + bool channel_eq = false; + bool first = true; + int tries; + + /* Write the link configuration data */ + intel_dp_aux_native_write(intel_output, 0x100, + link_configuration, DP_LINK_CONFIGURATION_SIZE); + + DP |= DP_PORT_EN; + DP &= ~DP_LINK_TRAIN_MASK; + memset(train_set, 0, 4); + voltage = 0xff; + tries = 0; + clock_recovery = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1, + DP_TRAINING_PATTERN_1, train_set, first)) + break; + first = false; + /* Set training pattern 1 */ + + udelay(100); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) { + clock_recovery = true; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < dp_priv->lane_count; i++) + if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == dp_priv->lane_count) + break; + + /* Check to see if we've tried the same voltage 5 times */ + if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + } + + /* channel equalization */ + tries = 0; + channel_eq = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + /* channel eq pattern */ + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2, + DP_TRAINING_PATTERN_2, train_set, + false)) + break; + + udelay(400); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) { + channel_eq = true; + break; + } + + /* Try 5 times */ + if (tries > 5) + break; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + ++tries; + } + + I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF); + POSTING_READ(dp_priv->output_reg); + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); +} + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN); + POSTING_READ(dp_priv->output_reg); +} + +static void +intel_dp_restore(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->save_DP & DP_PORT_EN) + intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration); + else + intel_dp_link_down(intel_output, dp_priv->save_DP); +} + +/* + * According to DP spec + * 5.1.2: + * 1. Read DPCD + * 2. Configure link according to Receiver Capabilities + * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 + * 4. Check link status on receipt of hot-plug interrupt + */ + +static void +intel_dp_check_link_status(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + + if (!intel_output->enc.crtc) + return; + + if (!intel_dp_get_link_status(intel_output, link_status)) { + intel_dp_link_down(intel_output, dp_priv->DP); + return; + } + + if (!intel_channel_eq_ok(link_status, dp_priv->lane_count)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); +} + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. + * + * \return true if DP port is connected. + * \return false if DP port is disconnected. + */ +static enum drm_connector_status +intel_dp_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t temp, bit; + enum drm_connector_status status; + + dp_priv->has_audio = false; + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, + temp | + DPB_HOTPLUG_INT_EN | + DPC_HOTPLUG_INT_EN | + DPD_HOTPLUG_INT_EN); + + POSTING_READ(PORT_HOTPLUG_EN); + + switch (dp_priv->output_reg) { + case DP_B: + bit = DPB_HOTPLUG_INT_STATUS; + break; + case DP_C: + bit = DPC_HOTPLUG_INT_STATUS; + break; + case DP_D: + bit = DPD_HOTPLUG_INT_STATUS; + break; + default: + return connector_status_unknown; + } + + temp = I915_READ(PORT_HOTPLUG_STAT); + + if ((temp & bit) == 0) + return connector_status_disconnected; + + status = connector_status_disconnected; + if (intel_dp_aux_native_read(intel_output, + 0x000, dp_priv->dpcd, + sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd)) + { + if (dp_priv->dpcd[0] != 0) + status = connector_status_connected; + } + return status; +} + +static int intel_dp_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* We should parse the EDID data and find out if it has an audio sink + */ + + return intel_ddc_get_modes(intel_output); +} + +static void +intel_dp_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { + .dpms = intel_dp_dpms, + .mode_fixup = intel_dp_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_dp_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_dp_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .save = intel_dp_save, + .restore = intel_dp_restore, + .detect = intel_dp_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_dp_destroy, +}; + +static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { + .get_modes = intel_dp_get_modes, + .mode_valid = intel_dp_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static void intel_dp_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_dp_enc_funcs = { + .destroy = intel_dp_enc_destroy, +}; + +void +intel_dp_hot_plug(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON) + intel_dp_check_link_status(intel_output); +} + +void +intel_dp_init(struct drm_device *dev, int output_reg) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_dp_priv *dp_priv; + + intel_output = kcalloc(sizeof(struct intel_output) + + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); + if (!intel_output) + return; + + dp_priv = (struct intel_dp_priv *)(intel_output + 1); + + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_dp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); + + intel_output->type = INTEL_OUTPUT_DISPLAYPORT; + + connector->interlace_allowed = true; + connector->doublescan_allowed = 0; + + dp_priv->intel_output = intel_output; + dp_priv->output_reg = output_reg; + dp_priv->has_audio = false; + dp_priv->dpms_mode = DRM_MODE_DPMS_ON; + intel_output->dev_priv = dp_priv; + + drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs, + DRM_MODE_ENCODER_TMDS); + drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + drm_sysfs_connector_add(connector); + + /* Set up the DDC bus. */ + intel_dp_i2c_init(intel_output, + (output_reg == DP_B) ? "DPDDC-B" : + (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D"); + intel_output->ddc_bus = &dp_priv->adapter; + intel_output->hot_plug = intel_dp_hot_plug; + + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written + * 0xd. Failure to do so will result in spurious interrupts being + * generated on the port when a cable is not attached. + */ + if (IS_G4X(dev) && !IS_GM45(dev)) { + u32 temp = I915_READ(PEG_BAND_GAP_DATA); + I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); + } +} diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h new file mode 100644 index 00000000000..2b38054d3b6 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.h @@ -0,0 +1,144 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _INTEL_DP_H_ +#define _INTEL_DP_H_ + +/* From the VESA DisplayPort spec */ + +#define AUX_NATIVE_WRITE 0x8 +#define AUX_NATIVE_READ 0x9 +#define AUX_I2C_WRITE 0x0 +#define AUX_I2C_READ 0x1 +#define AUX_I2C_STATUS 0x2 +#define AUX_I2C_MOT 0x4 + +#define AUX_NATIVE_REPLY_ACK (0x0 << 4) +#define AUX_NATIVE_REPLY_NACK (0x1 << 4) +#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) +#define AUX_NATIVE_REPLY_MASK (0x3 << 4) + +#define AUX_I2C_REPLY_ACK (0x0 << 6) +#define AUX_I2C_REPLY_NACK (0x1 << 6) +#define AUX_I2C_REPLY_DEFER (0x2 << 6) +#define AUX_I2C_REPLY_MASK (0x3 << 6) + +/* AUX CH addresses */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 + +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) +# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) +# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) +# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 + +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 + +#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes); +}; + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter); + +#endif /* _INTEL_DP_H_ */ diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c new file mode 100644 index 00000000000..4e60f14b1a6 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp_i2c.c @@ -0,0 +1,272 @@ +/* + * Copyright © 2009 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/i2c.h> +#include "intel_dp.h" + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (;;) { + ret = (*algo_data->aux_ch)(adapter, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + printk(KERN_ERR "aux_ch failed %d\n", ret); + return ret; + } + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + printk(KERN_ERR "aux_ch nack\n"); + return -EREMOTEIO; + case AUX_I2C_REPLY_DEFER: + printk(KERN_ERR "aux_ch defer\n"); + udelay(100); + break; + default: + printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + int ret; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + return ret; +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * the I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); + return ret; +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); + return ret; +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + printk(KERN_ERR "dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); + +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} +EXPORT_SYMBOL(i2c_dp_aux_add_bus); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cd4b9c5f715..004541c935a 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -54,6 +54,7 @@ #define INTEL_OUTPUT_LVDS 4 #define INTEL_OUTPUT_TVOUT 5 #define INTEL_OUTPUT_HDMI 6 +#define INTEL_OUTPUT_DISPLAYPORT 7 #define INTEL_DVO_CHIP_NONE 0 #define INTEL_DVO_CHIP_LVDS 1 @@ -65,7 +66,6 @@ struct intel_i2c_chan { u32 reg; /* GPIO reg */ struct i2c_adapter adapter; struct i2c_algo_bit_data algo; - u8 slave_addr; }; struct intel_framebuffer { @@ -79,11 +79,12 @@ struct intel_output { struct drm_encoder enc; int type; - struct intel_i2c_chan *i2c_bus; /* for control functions */ - struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ + struct i2c_adapter *i2c_bus; + struct i2c_adapter *ddc_bus; bool load_detect_temp; bool needs_tv_clock; void *dev_priv; + void (*hot_plug)(struct intel_output *); }; struct intel_crtc { @@ -104,9 +105,9 @@ struct intel_crtc { #define enc_to_intel_output(x) container_of(x, struct intel_output, enc) #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) -struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, - const char *name); -void intel_i2c_destroy(struct intel_i2c_chan *chan); +struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name); +void intel_i2c_destroy(struct i2c_adapter *adapter); int intel_ddc_get_modes(struct intel_output *intel_output); extern bool intel_ddc_probe(struct intel_output *intel_output); void intel_i2c_quirk_set(struct drm_device *dev, bool enable); @@ -116,6 +117,10 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_lvds_init(struct drm_device *dev); +extern void intel_dp_init(struct drm_device *dev, int dp_reg); +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); extern void intel_crtc_load_lut(struct drm_crtc *crtc); extern void intel_encoder_prepare (struct drm_encoder *encoder); diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 1ee3007d6ec..13bff20930e 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -384,10 +384,9 @@ void intel_dvo_init(struct drm_device *dev) { struct intel_output *intel_output; struct intel_dvo_device *dvo; - struct intel_i2c_chan *i2cbus = NULL; + struct i2c_adapter *i2cbus = NULL; int ret = 0; int i; - int gpio_inited = 0; int encoder_type = DRM_MODE_ENCODER_NONE; intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) @@ -420,14 +419,11 @@ void intel_dvo_init(struct drm_device *dev) * It appears that everything is on GPIOE except for panels * on i830 laptops, which are on GPIOB (DVOA). */ - if (gpio_inited != gpio) { - if (i2cbus != NULL) - intel_i2c_destroy(i2cbus); - if (!(i2cbus = intel_i2c_create(dev, gpio, - gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { - continue; - } - gpio_inited = gpio; + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); + if (!(i2cbus = intel_i2c_create(dev, gpio, + gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { + continue; } if (dvo->dev_ops!= NULL) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 4ea2a651b92..9e30daae37d 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -31,6 +31,7 @@ #include "drmP.h" #include "drm.h" #include "drm_crtc.h" +#include "drm_edid.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" @@ -56,8 +57,7 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE | SDVO_VSYNC_ACTIVE_HIGH | - SDVO_HSYNC_ACTIVE_HIGH | - SDVO_NULL_PACKETS_DURING_VSYNC; + SDVO_HSYNC_ACTIVE_HIGH; if (hdmi_priv->has_hdmi_sink) sdvox |= SDVO_AUDIO_ENABLE; @@ -129,20 +129,26 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder, return true; } -static void -intel_hdmi_sink_detect(struct drm_connector *connector) +static enum drm_connector_status +intel_hdmi_edid_detect(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; struct edid *edid = NULL; + enum drm_connector_status status = connector_status_disconnected; edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); - if (edid != NULL) { - hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); - kfree(edid); + intel_output->ddc_bus); + hdmi_priv->has_hdmi_sink = false; + if (edid) { + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + status = connector_status_connected; + hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); + } intel_output->base.display_info.raw_edid = NULL; + kfree(edid); } + return status; } static enum drm_connector_status @@ -154,11 +160,7 @@ igdng_hdmi_detect(struct drm_connector *connector) /* FIXME hotplug detect */ hdmi_priv->has_hdmi_sink = false; - intel_hdmi_sink_detect(connector); - if (hdmi_priv->has_hdmi_sink) - return connector_status_connected; - else - return connector_status_disconnected; + return intel_hdmi_edid_detect(connector); } static enum drm_connector_status @@ -201,10 +203,9 @@ intel_hdmi_detect(struct drm_connector *connector) return connector_status_unknown; } - if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) { - intel_hdmi_sink_detect(connector); - return connector_status_connected; - } else + if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) + return intel_hdmi_edid_detect(connector); + else return connector_status_disconnected; } diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index f7061f68d05..62b8bead765 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -124,6 +124,7 @@ static void set_data(void *data, int state_high) * @output: driver specific output device * @reg: GPIO reg to use * @name: name for this bus + * @slave_addr: slave address (if fixed) * * Creates and registers a new i2c bus with the Linux i2c layer, for use * in output probing and control (e.g. DDC or SDVO control functions). @@ -139,8 +140,8 @@ static void set_data(void *data, int state_high) * %GPIOH * see PRM for details on how these different busses are used. */ -struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, - const char *name) +struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name) { struct intel_i2c_chan *chan; @@ -174,7 +175,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, intel_i2c_quirk_set(dev, false); udelay(20); - return chan; + return &chan->adapter; out_free: kfree(chan); @@ -187,11 +188,16 @@ out_free: * * Unregister the adapter from the i2c layer, then free the structure. */ -void intel_i2c_destroy(struct intel_i2c_chan *chan) +void intel_i2c_destroy(struct i2c_adapter *adapter) { - if (!chan) + struct intel_i2c_chan *chan; + + if (!adapter) return; + chan = container_of(adapter, + struct intel_i2c_chan, + adapter); i2c_del_adapter(&chan->adapter); kfree(chan); } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f073ed8432e..9564ca44a97 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -39,6 +39,21 @@ #define I915_LVDS "i915_lvds" +/* + * the following four scaling options are defined. + * #define DRM_MODE_SCALE_NON_GPU 0 + * #define DRM_MODE_SCALE_FULLSCREEN 1 + * #define DRM_MODE_SCALE_NO_SCALE 2 + * #define DRM_MODE_SCALE_ASPECT 3 + */ + +/* Private structure for the integrated LVDS support */ +struct intel_lvds_priv { + int fitting_mode; + u32 pfit_control; + u32 pfit_pgm_ratios; +}; + /** * Sets the backlight level. * @@ -213,10 +228,27 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + /* + * float point operation is not supported . So the PANEL_RATIO_FACTOR + * is defined, which can avoid the float point computation when + * calculating the panel ratio. + */ +#define PANEL_RATIO_FACTOR 8192 struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct drm_encoder *tmp_encoder; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + u32 pfit_control = 0, pfit_pgm_ratios = 0; + int left_border = 0, right_border = 0, top_border = 0; + int bottom_border = 0; + bool border = 0; + int panel_ratio, desired_ratio, vert_scale, horiz_scale; + int horiz_ratio, vert_ratio; + u32 hsync_width, vsync_width; + u32 hblank_width, vblank_width; + u32 hsync_pos, vsync_pos; /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { @@ -232,7 +264,9 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, return false; } } - + /* If we don't have a panel mode, there is nothing we can do */ + if (dev_priv->panel_fixed_mode == NULL) + return true; /* * If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, @@ -256,6 +290,243 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); } + /* Make sure pre-965s set dither correctly */ + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + + /* Native modes don't need fitting */ + if (adjusted_mode->hdisplay == mode->hdisplay && + adjusted_mode->vdisplay == mode->vdisplay) { + pfit_pgm_ratios = 0; + border = 0; + goto out; + } + + /* 965+ wants fuzzy fitting */ + if (IS_I965G(dev)) + pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | + PFIT_FILTER_FUZZY; + + hsync_width = adjusted_mode->crtc_hsync_end - + adjusted_mode->crtc_hsync_start; + vsync_width = adjusted_mode->crtc_vsync_end - + adjusted_mode->crtc_vsync_start; + hblank_width = adjusted_mode->crtc_hblank_end - + adjusted_mode->crtc_hblank_start; + vblank_width = adjusted_mode->crtc_vblank_end - + adjusted_mode->crtc_vblank_start; + /* + * Deal with panel fitting options. Figure out how to stretch the + * image based on its aspect ratio & the current panel fitting mode. + */ + panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / + adjusted_mode->vdisplay; + desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR / + mode->vdisplay; + /* + * Enable automatic panel scaling for non-native modes so that they fill + * the screen. Should be enabled before the pipe is enabled, according + * to register description and PRM. + * Change the value here to see the borders for debugging + */ + I915_WRITE(BCLRPAT_A, 0); + I915_WRITE(BCLRPAT_B, 0); + + switch (lvds_priv->fitting_mode) { + case DRM_MODE_SCALE_NO_SCALE: + /* + * For centered modes, we have to calculate border widths & + * heights and modify the values programmed into the CRTC. + */ + left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2; + right_border = left_border; + if (mode->hdisplay & 1) + right_border++; + top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + /* Set active & border values */ + adjusted_mode->crtc_hdisplay = mode->hdisplay; + /* Keep the boder be even */ + if (right_border & 1) + right_border++; + /* use the border directly instead of border minuse one */ + adjusted_mode->crtc_hblank_start = mode->hdisplay + + right_border; + /* keep the blank width constant */ + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_hblank_start + hblank_width; + /* get the hsync pos relative to hblank start */ + hsync_pos = (hblank_width - hsync_width) / 2; + /* keep the hsync pos be even */ + if (hsync_pos & 1) + hsync_pos++; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start + hsync_pos; + /* keep the hsync width constant */ + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hsync_start + hsync_width; + adjusted_mode->crtc_vdisplay = mode->vdisplay; + /* use the border instead of border minus one */ + adjusted_mode->crtc_vblank_start = mode->vdisplay + + bottom_border; + /* keep the vblank width constant */ + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vblank_start + vblank_width; + /* get the vsync start postion relative to vblank start */ + vsync_pos = (vblank_width - vsync_width) / 2; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start + vsync_pos; + /* keep the vsync width constant */ + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vblank_start + vsync_width; + border = 1; + break; + case DRM_MODE_SCALE_ASPECT: + /* Scale but preserve the spect ratio */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) { + /* 965+ is easy, it does everything in hw */ + if (panel_ratio > desired_ratio) + pfit_control |= PFIT_SCALING_PILLAR; + else if (panel_ratio < desired_ratio) + pfit_control |= PFIT_SCALING_LETTER; + else + pfit_control |= PFIT_SCALING_AUTO; + } else { + /* + * For earlier chips we have to calculate the scaling + * ratio by hand and program it into the + * PFIT_PGM_RATIO register + */ + u32 horiz_bits, vert_bits, bits = 12; + horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->hdisplay; + vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->vdisplay; + horiz_scale = adjusted_mode->hdisplay * + PANEL_RATIO_FACTOR / mode->hdisplay; + vert_scale = adjusted_mode->vdisplay * + PANEL_RATIO_FACTOR / mode->vdisplay; + + /* retain aspect ratio */ + if (panel_ratio > desired_ratio) { /* Pillar */ + u32 scaled_width; + scaled_width = mode->hdisplay * vert_scale / + PANEL_RATIO_FACTOR; + horiz_ratio = vert_ratio; + pfit_control |= (VERT_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Pillar will have left/right borders */ + left_border = (adjusted_mode->hdisplay - + scaled_width) / 2; + right_border = left_border; + if (mode->hdisplay & 1) /* odd resolutions */ + right_border++; + /* keep the border be even */ + if (right_border & 1) + right_border++; + adjusted_mode->crtc_hdisplay = scaled_width; + /* use border instead of border minus one */ + adjusted_mode->crtc_hblank_start = + scaled_width + right_border; + /* keep the hblank width constant */ + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_hblank_start + + hblank_width; + /* + * get the hsync start pos relative to + * hblank start + */ + hsync_pos = (hblank_width - hsync_width) / 2; + /* keep the hsync_pos be even */ + if (hsync_pos & 1) + hsync_pos++; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start + + hsync_pos; + /* keept hsync width constant */ + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hsync_start + + hsync_width; + border = 1; + } else if (panel_ratio < desired_ratio) { /* letter */ + u32 scaled_height = mode->vdisplay * + horiz_scale / PANEL_RATIO_FACTOR; + vert_ratio = horiz_ratio; + pfit_control |= (HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Letterbox will have top/bottom border */ + top_border = (adjusted_mode->vdisplay - + scaled_height) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + adjusted_mode->crtc_vdisplay = scaled_height; + /* use border instead of border minus one */ + adjusted_mode->crtc_vblank_start = + scaled_height + bottom_border; + /* keep the vblank width constant */ + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vblank_start + + vblank_width; + /* + * get the vsync start pos relative to + * vblank start + */ + vsync_pos = (vblank_width - vsync_width) / 2; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start + + vsync_pos; + /* keep the vsync width constant */ + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vsync_start + + vsync_width; + border = 1; + } else { + /* Aspects match, Let hw scale both directions */ + pfit_control |= (VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } + horiz_bits = (1 << bits) * horiz_ratio / + PANEL_RATIO_FACTOR; + vert_bits = (1 << bits) * vert_ratio / + PANEL_RATIO_FACTOR; + pfit_pgm_ratios = + ((vert_bits << PFIT_VERT_SCALE_SHIFT) & + PFIT_VERT_SCALE_MASK) | + ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) & + PFIT_HORIZ_SCALE_MASK); + } + break; + + case DRM_MODE_SCALE_FULLSCREEN: + /* + * Full scaling, even if it changes the aspect ratio. + * Fortunately this is all done for us in hw. + */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) + pfit_control |= PFIT_SCALING_AUTO; + else + pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + break; + default: + break; + } + +out: + lvds_priv->pfit_control = pfit_control; + lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the @@ -301,8 +572,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - u32 pfit_control; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; /* * The LVDS pin pair will already have been turned on in the @@ -319,22 +590,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) - pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | - HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | - HORIZ_INTERP_BILINEAR); - else - pfit_control = 0; - - if (!IS_I965G(dev)) { - if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - } - else - pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; - - I915_WRITE(PFIT_CONTROL, pfit_control); + I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control); } /** @@ -406,6 +663,34 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = + to_intel_output(connector); + + if (property == dev->mode_config.scaling_mode_property && + connector->encoder) { + struct drm_crtc *crtc = connector->encoder->crtc; + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + if (value == DRM_MODE_SCALE_NON_GPU) { + DRM_DEBUG_KMS(I915_LVDS, + "non_GPU property is unsupported\n"); + return 0; + } + if (lvds_priv->fitting_mode == value) { + /* the LVDS scaling property is not changed */ + return 0; + } + lvds_priv->fitting_mode = value; + if (crtc && crtc->enabled) { + /* + * If the CRTC is enabled, the display will be changed + * according to the new panel fitting mode. + */ + drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); + } + } + return 0; } @@ -456,7 +741,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core series)", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), }, }, @@ -464,7 +749,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core 2 series)", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), }, }, @@ -518,6 +803,7 @@ void intel_lvds_init(struct drm_device *dev) struct drm_encoder *encoder; struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; + struct intel_lvds_priv *lvds_priv; u32 lvds; int pipe, gpio = GPIOC; @@ -531,7 +817,8 @@ void intel_lvds_init(struct drm_device *dev) gpio = PCH_GPIOC; } - intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + intel_output = kzalloc(sizeof(struct intel_output) + + sizeof(struct intel_lvds_priv), GFP_KERNEL); if (!intel_output) { return; } @@ -553,7 +840,18 @@ void intel_lvds_init(struct drm_device *dev) connector->interlace_allowed = false; connector->doublescan_allowed = false; + lvds_priv = (struct intel_lvds_priv *)(intel_output + 1); + intel_output->dev_priv = lvds_priv; + /* create the scaling mode property */ + drm_mode_create_scaling_mode_property(dev); + /* + * the initial panel fitting mode will be FULL_SCREEN. + */ + drm_connector_attach_property(&intel_output->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN; /* * LVDS discovery: * 1) check for EDID on DDC @@ -649,5 +947,5 @@ failed: if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); - kfree(connector); + kfree(intel_output); } diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index e0910fefce8..67e2f4632a2 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -53,10 +53,9 @@ bool intel_ddc_probe(struct intel_output *intel_output) } }; - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); - ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); - + intel_i2c_quirk_set(intel_output->base.dev, true); + ret = i2c_transfer(intel_output->ddc_bus, msgs, 2); + intel_i2c_quirk_set(intel_output->base.dev, false); if (ret == 2) return true; @@ -74,10 +73,9 @@ int intel_ddc_get_modes(struct intel_output *intel_output) struct edid *edid; int ret = 0; - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); - edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); + intel_i2c_quirk_set(intel_output->base.dev, true); + edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); + intel_i2c_quirk_set(intel_output->base.dev, false); if (edid) { drm_mode_connector_update_edid_property(&intel_output->base, edid); diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9a00adb3a50..f03473779fe 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -38,8 +38,7 @@ #undef SDVO_DEBUG #define I915_SDVO "i915_sdvo" struct intel_sdvo_priv { - struct intel_i2c_chan *i2c_bus; - int slaveaddr; + u8 slave_addr; /* Register for the SDVO device: SDVOB or SDVOC */ int output_device; @@ -146,13 +145,13 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, struct i2c_msg msgs[] = { { - .addr = sdvo_priv->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = sdvo_priv->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = I2C_M_RD, .len = 1, .buf = buf, @@ -162,7 +161,7 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, out_buf[0] = addr; out_buf[1] = 0; - if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) + if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2) { *ch = buf[0]; return true; @@ -175,10 +174,11 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, u8 ch) { + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; u8 out_buf[2]; struct i2c_msg msgs[] = { { - .addr = intel_output->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = 0, .len = 2, .buf = out_buf, @@ -188,7 +188,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, out_buf[0] = addr; out_buf[1] = ch; - if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) + if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1) { return true; } @@ -1369,9 +1369,8 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; struct edid *edid = NULL; - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); + intel_output->ddc_bus); if (edid != NULL) { sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid); kfree(edid); @@ -1549,7 +1548,6 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector) static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; struct drm_i915_private *dev_priv = connector->dev->dev_private; /* @@ -1557,8 +1555,6 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) * Assume that the preferred modes are * arranged in priority order. */ - /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); if (list_empty(&connector->probed_modes) == false) return; @@ -1709,7 +1705,7 @@ intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (to_intel_output(connector)->ddc_bus == chan) { + if (to_intel_output(connector)->ddc_bus == &chan->adapter) { intel_output = to_intel_output(connector); break; } @@ -1723,7 +1719,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; struct i2c_algo_bit_data *algo_data; - struct i2c_algorithm *algo; + const struct i2c_algorithm *algo; algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data; intel_output = @@ -1733,7 +1729,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, return -EINVAL; sdvo_priv = intel_output->dev_priv; - algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo; + algo = intel_output->i2c_bus->algo; intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); return algo->master_xfer(i2c_adap, msgs, num); @@ -1785,13 +1781,11 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; - struct intel_i2c_chan *i2cbus = NULL; - struct intel_i2c_chan *ddcbus = NULL; + int connector_type; u8 ch[0x40]; int i; - int encoder_type, output_id; - u8 slave_addr; + int encoder_type; intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); if (!intel_output) { @@ -1799,29 +1793,24 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); + sdvo_priv->output_device = output_device; + + intel_output->dev_priv = sdvo_priv; intel_output->type = INTEL_OUTPUT_SDVO; /* setup the DDC bus. */ if (output_device == SDVOB) - i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); + intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); else - i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); + intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); - if (!i2cbus) + if (!intel_output->i2c_bus) goto err_inteloutput; - slave_addr = intel_sdvo_get_slave_addr(dev, output_device); - sdvo_priv->i2c_bus = i2cbus; + sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device); - if (output_device == SDVOB) { - output_id = 1; - } else { - output_id = 2; - } - sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1; - sdvo_priv->output_device = output_device; - intel_output->i2c_bus = i2cbus; - intel_output->dev_priv = sdvo_priv; + /* Save the bit-banging i2c functionality for use by the DDC wrapper */ + intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality; /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { @@ -1835,17 +1824,15 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* setup the DDC bus. */ if (output_device == SDVOB) - ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); + intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); else - ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); + intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); - if (ddcbus == NULL) + if (intel_output->ddc_bus == NULL) goto err_i2c; - intel_sdvo_i2c_bit_algo.functionality = - intel_output->i2c_bus->adapter.algo->functionality; - ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo; - intel_output->ddc_bus = ddcbus; + /* Wrap with our custom algo which switches to DDC mode */ + intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo; /* In defaut case sdvo lvds is false */ sdvo_priv->is_lvds = false; @@ -1965,9 +1952,10 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) return true; err_i2c: - if (ddcbus != NULL) + if (intel_output->ddc_bus != NULL) intel_i2c_destroy(intel_output->ddc_bus); - intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->i2c_bus != NULL) + intel_i2c_destroy(intel_output->i2c_bus); err_inteloutput: kfree(intel_output); diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index ea68992e441..a43c98e3f07 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1383,34 +1383,31 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output) /* * Detect TV by polling) */ - if (intel_output->load_detect_temp) { - /* TV not currently running, prod it with destructive detect */ - save_tv_dac = tv_dac; - tv_ctl = I915_READ(TV_CTL); - save_tv_ctl = tv_ctl; - tv_ctl &= ~TV_ENC_ENABLE; - tv_ctl &= ~TV_TEST_MODE_MASK; - tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; - tv_dac &= ~TVDAC_SENSE_MASK; - tv_dac &= ~DAC_A_MASK; - tv_dac &= ~DAC_B_MASK; - tv_dac &= ~DAC_C_MASK; - tv_dac |= (TVDAC_STATE_CHG_EN | - TVDAC_A_SENSE_CTL | - TVDAC_B_SENSE_CTL | - TVDAC_C_SENSE_CTL | - DAC_CTL_OVERRIDE | - DAC_A_0_7_V | - DAC_B_0_7_V | - DAC_C_0_7_V); - I915_WRITE(TV_CTL, tv_ctl); - I915_WRITE(TV_DAC, tv_dac); - intel_wait_for_vblank(dev); - tv_dac = I915_READ(TV_DAC); - I915_WRITE(TV_DAC, save_tv_dac); - I915_WRITE(TV_CTL, save_tv_ctl); - intel_wait_for_vblank(dev); - } + save_tv_dac = tv_dac; + tv_ctl = I915_READ(TV_CTL); + save_tv_ctl = tv_ctl; + tv_ctl &= ~TV_ENC_ENABLE; + tv_ctl &= ~TV_TEST_MODE_MASK; + tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; + tv_dac &= ~TVDAC_SENSE_MASK; + tv_dac &= ~DAC_A_MASK; + tv_dac &= ~DAC_B_MASK; + tv_dac &= ~DAC_C_MASK; + tv_dac |= (TVDAC_STATE_CHG_EN | + TVDAC_A_SENSE_CTL | + TVDAC_B_SENSE_CTL | + TVDAC_C_SENSE_CTL | + DAC_CTL_OVERRIDE | + DAC_A_0_7_V | + DAC_B_0_7_V | + DAC_C_0_7_V); + I915_WRITE(TV_CTL, tv_ctl); + I915_WRITE(TV_DAC, tv_dac); + intel_wait_for_vblank(dev); + tv_dac = I915_READ(TV_DAC); + I915_WRITE(TV_DAC, save_tv_dac); + I915_WRITE(TV_CTL, save_tv_ctl); + intel_wait_for_vblank(dev); /* * A B C * 0 1 1 Composite diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f30aa7274a5..f97563db4e5 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -35,6 +35,23 @@ #include "atom.h" /* + * Clear GPU surface registers. + */ +static void radeon_surface_init(struct radeon_device *rdev) +{ + /* FIXME: check this out */ + if (rdev->family < CHIP_R600) { + int i; + + for (i = 0; i < 8; i++) { + WREG32(RADEON_SURFACE0_INFO + + i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO), + 0); + } + } +} + +/* * GPU scratch registers helpers function. */ static void radeon_scratch_init(struct radeon_device *rdev) @@ -496,6 +513,8 @@ int radeon_device_init(struct radeon_device *rdev, radeon_errata(rdev); /* Initialize scratch registers */ radeon_scratch_init(rdev); + /* Initialize surface registers */ + radeon_surface_init(rdev); /* TODO: disable VGA need to use VGA request */ /* BIOS*/ @@ -604,9 +623,6 @@ int radeon_device_init(struct radeon_device *rdev, if (r) { return r; } - if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) { - rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private; - } if (!ret) { DRM_INFO("radeon: kernel modesetting successfully initialized.\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 09c9fb9f621..84ba69f4878 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -345,7 +345,7 @@ static void __exit radeon_exit(void) drm_exit(driver); } -late_initcall(radeon_init); +module_init(radeon_init); module_exit(radeon_exit); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index fa86d398945..9e8f191eb64 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -478,14 +478,16 @@ int radeonfb_create(struct radeon_device *rdev, { struct fb_info *info; struct radeon_fb_device *rfbdev; - struct drm_framebuffer *fb; + struct drm_framebuffer *fb = NULL; struct radeon_framebuffer *rfb; struct drm_mode_fb_cmd mode_cmd; struct drm_gem_object *gobj = NULL; struct radeon_object *robj = NULL; struct device *device = &rdev->pdev->dev; int size, aligned_size, ret; + u64 fb_gpuaddr; void *fbptr = NULL; + unsigned long tmp; mode_cmd.width = surface_width; mode_cmd.height = surface_height; @@ -498,11 +500,12 @@ int radeonfb_create(struct radeon_device *rdev, aligned_size = ALIGN(size, PAGE_SIZE); ret = radeon_gem_object_create(rdev, aligned_size, 0, - RADEON_GEM_DOMAIN_VRAM, - false, ttm_bo_type_kernel, - false, &gobj); + RADEON_GEM_DOMAIN_VRAM, + false, ttm_bo_type_kernel, + false, &gobj); if (ret) { - printk(KERN_ERR "failed to allocate framebuffer\n"); + printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n", + surface_width, surface_height); ret = -ENOMEM; goto out; } @@ -515,12 +518,19 @@ int radeonfb_create(struct radeon_device *rdev, ret = -ENOMEM; goto out_unref; } + ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr); + if (ret) { + printk(KERN_ERR "failed to pin framebuffer\n"); + ret = -ENOMEM; + goto out_unref; + } list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list); rfb = to_radeon_framebuffer(fb); *rfb_p = rfb; rdev->fbdev_rfb = rfb; + rdev->fbdev_robj = robj; info = framebuffer_alloc(sizeof(struct radeon_fb_device), device); if (info == NULL) { @@ -541,13 +551,13 @@ int radeonfb_create(struct radeon_device *rdev, info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ info->fix.ywrapstep = 0; - info->fix.accel = FB_ACCEL_I830; + info->fix.accel = FB_ACCEL_NONE; info->fix.type_aux = 0; info->flags = FBINFO_DEFAULT; info->fbops = &radeonfb_ops; info->fix.line_length = fb->pitch; - info->screen_base = fbptr; - info->fix.smem_start = (unsigned long)fbptr; + tmp = fb_gpuaddr - rdev->mc.vram_location; + info->fix.smem_start = rdev->mc.aper_base + tmp; info->fix.smem_len = size; info->screen_base = fbptr; info->screen_size = size; @@ -562,8 +572,8 @@ int radeonfb_create(struct radeon_device *rdev, info->var.width = -1; info->var.xres = fb_width; info->var.yres = fb_height; - info->fix.mmio_start = pci_resource_start(rdev->pdev, 2); - info->fix.mmio_len = pci_resource_len(rdev->pdev, 2); + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; info->pixmap.size = 64*1024; info->pixmap.buf_align = 8; info->pixmap.access_align = 32; @@ -644,7 +654,7 @@ out_unref: if (robj) { radeon_object_kunmap(robj); } - if (ret) { + if (fb && ret) { list_del(&fb->filp_head); drm_gem_object_unreference(gobj); drm_framebuffer_cleanup(fb); @@ -813,6 +823,7 @@ int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb) robj = rfb->obj->driver_private; unregister_framebuffer(info); radeon_object_kunmap(robj); + radeon_object_unpin(robj); framebuffer_release(info); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 983e8df5e00..bac0d06c52a 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -223,7 +223,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, { uint32_t flags; uint32_t tmp; - void *fbptr; int r; flags = radeon_object_flags_from_domain(domain); @@ -242,10 +241,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, DRM_ERROR("radeon: failed to reserve object for pinning it.\n"); return r; } - if (robj->rdev->fbdev_robj == robj) { - mutex_lock(&robj->rdev->fbdev_info->lock); - radeon_object_kunmap(robj); - } tmp = robj->tobj.mem.placement; ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM); robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING; @@ -261,23 +256,12 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, DRM_ERROR("radeon: failed to pin object.\n"); } radeon_object_unreserve(robj); - if (robj->rdev->fbdev_robj == robj) { - if (!r) { - r = radeon_object_kmap(robj, &fbptr); - } - if (!r) { - robj->rdev->fbdev_info->screen_base = fbptr; - robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr; - } - mutex_unlock(&robj->rdev->fbdev_info->lock); - } return r; } void radeon_object_unpin(struct radeon_object *robj) { uint32_t flags; - void *fbptr; int r; spin_lock(&robj->tobj.lock); @@ -297,10 +281,6 @@ void radeon_object_unpin(struct radeon_object *robj) DRM_ERROR("radeon: failed to reserve object for unpinning it.\n"); return; } - if (robj->rdev->fbdev_robj == robj) { - mutex_lock(&robj->rdev->fbdev_info->lock); - radeon_object_kunmap(robj); - } flags = robj->tobj.mem.placement; robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT; r = ttm_buffer_object_validate(&robj->tobj, @@ -310,16 +290,6 @@ void radeon_object_unpin(struct radeon_object *robj) DRM_ERROR("radeon: failed to unpin buffer.\n"); } radeon_object_unreserve(robj); - if (robj->rdev->fbdev_robj == robj) { - if (!r) { - r = radeon_object_kmap(robj, &fbptr); - } - if (!r) { - robj->rdev->fbdev_info->screen_base = fbptr; - robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr; - } - mutex_unlock(&robj->rdev->fbdev_info->lock); - } } int radeon_object_wait(struct radeon_object *robj) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index 517c8455963..bdec583901e 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -34,7 +34,6 @@ #include <linux/highmem.h> #include <linux/wait.h> #include <linux/vmalloc.h> -#include <linux/version.h> #include <linux/module.h> void ttm_bo_free_old_node(struct ttm_buffer_object *bo) diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index 27b146c54fb..40b75032ea4 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -32,7 +32,6 @@ #include <ttm/ttm_bo_driver.h> #include <ttm/ttm_placement.h> #include <linux/mm.h> -#include <linux/version.h> #include <linux/rbtree.h> #include <linux/module.h> #include <linux/uaccess.h> diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 0331fa74cd3..75dc8bd2459 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -28,7 +28,6 @@ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com> */ -#include <linux/version.h> #include <linux/vmalloc.h> #include <linux/sched.h> #include <linux/highmem.h> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index aa87b6a3bbe..8206442fbab 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -328,6 +328,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE tristate "Synopsys DesignWare" + depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index e4476743f20..b1bc6e277d2 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -85,10 +85,11 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); - printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n" - KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n" - KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" - KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n", + printk(KERN_DEBUG + " cntl = 0x%02x, mdcntl = 0x%02x\n" + " sts = 0x%02x, extsts = 0x%02x\n" + " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" + " xtcntlss = 0x%02x, directcntl = 0x%02x\n", in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), in_8(&iic->xtcntlss), in_8(&iic->directcntl)); diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index bd066bb9d61..09f98ed0731 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -135,6 +135,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); hw[0].irq = 14; + hw[1].irq = 15; return ide_host_add(d, hws, 2, NULL); } diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 77f79d26b26..c509c991646 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -92,6 +92,11 @@ int ide_acpi_init(void) return 0; } +bool ide_port_acpi(ide_hwif_t *hwif) +{ + return ide_noacpi == 0 && hwif->acpidata; +} + /** * ide_get_dev_handle - finds acpi_handle and PCI device.function * @dev: device to locate @@ -352,9 +357,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive) unsigned long gtf_address; unsigned long obj_loc; - if (ide_noacpi) - return 0; - DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn); ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc); @@ -389,16 +391,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) struct acpi_buffer output; union acpi_object *out_obj; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Setting up output buffer for _GTM */ output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ @@ -479,16 +471,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) struct ide_acpi_drive_link *master = &hwif->acpidata->master; struct ide_acpi_drive_link *slave = &hwif->acpidata->slave; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Give the GTM buffer + drive Identify data to the channel via the * _STM method: */ /* setup input parameters buffer for _STM */ @@ -527,16 +509,11 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) ide_drive_t *drive; int i; - if (ide_noacpi || ide_noacpi_psx) + if (ide_noacpi_psx) return; DEBPRINT("ENTER:\n"); - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* channel first and then drives for power on and verse versa for power off */ if (on) acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0); @@ -616,7 +593,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) drive->name, err); } - if (!ide_acpionboot) { + if (ide_noacpi || ide_acpionboot == 0) { DEBPRINT("ACPI methods disabled on boot\n"); return; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 4a19686fcfe..6a9a769bffc 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -592,9 +592,19 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } } else if (!blk_pc_request(rq)) { ide_cd_request_sense_fixup(drive, cmd); - /* complain if we still have data left to transfer */ + uptodate = cmd->nleft ? 0 : 1; - if (uptodate == 0) + + /* + * suck out the remaining bytes from the drive in an + * attempt to complete the data xfer. (see BZ#13399) + */ + if (!(stat & ATA_ERR) && !uptodate && thislen) { + ide_pio_bytes(drive, cmd, write, thislen); + uptodate = cmd->nleft ? 0 : 1; + } + + if (!uptodate) rq->cmd_flags |= REQ_FAILED; } goto out_end; @@ -876,9 +886,12 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, return stat; /* - * Sanity check the given block size + * Sanity check the given block size, in so far as making + * sure the sectors_per_frame we give to the caller won't + * end up being bogus. */ blocklen = be32_to_cpu(capbuf.blocklen); + blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS; switch (blocklen) { case 512: case 1024: @@ -886,10 +899,9 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, case 4096: break; default: - printk(KERN_ERR PFX "%s: weird block size %u\n", + printk_once(KERN_ERR PFX "%s: weird block size %u; " + "setting default block size to 2048\n", drive->name, blocklen); - printk(KERN_ERR PFX "%s: default to 2kb block size\n", - drive->name); blocklen = 2048; break; } diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index 5bf958e5b1d..1099bf7cf96 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c @@ -183,6 +183,6 @@ ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq) err = setfunc(drive, *(int *)&rq->cmd[1]); if (err) rq->errors = err; - ide_complete_rq(drive, err, ide_rq_bytes(rq)); + ide_complete_rq(drive, err, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 219e6fb78dc..ee58c88dee5 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -361,9 +361,6 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; - if (ide_id_dma_bug(drive)) - return 0; - if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -394,24 +391,6 @@ static int ide_dma_check(ide_drive_t *drive) return -1; } -int ide_id_dma_bug(ide_drive_t *drive) -{ - u16 *id = drive->id; - - if (id[ATA_ID_FIELD_VALID] & 4) { - if ((id[ATA_ID_UDMA_MODES] >> 8) && - (id[ATA_ID_MWDMA_MODES] >> 8)) - goto err_out; - } else if ((id[ATA_ID_MWDMA_MODES] >> 8) && - (id[ATA_ID_SWDMA_MODES] >> 8)) - goto err_out; - - return 0; -err_out: - printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); - return 1; -} - int ide_set_dma(ide_drive_t *drive) { int rc; diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index 2b914197961..e9abf2c3c33 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -149,7 +149,7 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) { if (err <= 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq)); + ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq)); } } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8b3f204f7d7..fefbdfc8db0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -293,7 +293,7 @@ out_end: drive->failed_pc = NULL; if (blk_fs_request(rq) == 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1059f809b80..db96138fefc 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -112,16 +112,6 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) } } -/* obsolete, blk_rq_bytes() should be used instead */ -unsigned int ide_rq_bytes(struct request *rq) -{ - if (blk_pc_request(rq)) - return blk_rq_bytes(rq); - else - return blk_rq_cur_sectors(rq) << 9; -} -EXPORT_SYMBOL_GPL(ide_rq_bytes); - int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes) { ide_hwif_t *hwif = drive->hwif; @@ -152,14 +142,14 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq) if ((media == ide_floppy || media == ide_tape) && drv_req) { rq->errors = 0; - ide_complete_rq(drive, 0, blk_rq_bytes(rq)); } else { if (media == ide_tape) rq->errors = IDE_DRV_ERROR_GENERAL; else if (blk_fs_request(rq) == 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); } + + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); } static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 82f252c3ee6..e246d3d3fbc 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -64,7 +64,8 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, goto out; } - id = kmalloc(size, GFP_KERNEL); + /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */ + id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL); if (id == NULL) { rc = -ENOMEM; goto out; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index fa047150a1c..2892b242bbe 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -210,6 +210,7 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); */ static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, + { "QUANTUM FIREBALLlct20 30" , "APL.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, @@ -329,9 +330,6 @@ int ide_driveid_update(ide_drive_t *drive) kfree(id); - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive)) - ide_dma_off(drive); - return 1; out_err: if (rc == 2) diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index c14ca144cff..ad7be2669dc 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -10,9 +10,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) struct request_pm_state rqpm; int ret; - /* call ACPI _GTM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) - ide_acpi_get_timing(hwif); + if (ide_port_acpi(hwif)) { + /* call ACPI _GTM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) + ide_acpi_get_timing(hwif); + } memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); @@ -26,9 +28,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ret = blk_execute_rq(drive->queue, NULL, rq, 0); blk_put_request(rq); - /* call ACPI _PS3 only after both devices are suspended */ - if (ret == 0 && ((drive->dn & 1) || pair == NULL)) - ide_acpi_set_state(hwif, 0); + if (ret == 0 && ide_port_acpi(hwif)) { + /* call ACPI _PS3 only after both devices are suspended */ + if ((drive->dn & 1) || pair == NULL) + ide_acpi_set_state(hwif, 0); + } return ret; } @@ -42,13 +46,15 @@ int generic_ide_resume(struct device *dev) struct request_pm_state rqpm; int err; - /* call ACPI _PS0 / _STM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) { - ide_acpi_set_state(hwif, 1); - ide_acpi_push_timing(hwif); - } + if (ide_port_acpi(hwif)) { + /* call ACPI _PS0 / _STM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) { + ide_acpi_set_state(hwif, 1); + ide_acpi_push_timing(hwif); + } - ide_acpi_exec_tfs(drive); + ide_acpi_exec_tfs(drive); + } memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 51af4eea0d3..1bb106f6221 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -818,6 +818,24 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) return j; } +static void ide_host_enable_irqs(struct ide_host *host) +{ + ide_hwif_t *hwif; + int i; + + ide_host_for_each_port(i, hwif, host) { + if (hwif == NULL) + continue; + + /* clear any pending IRQs */ + hwif->tp_ops->read_status(hwif); + + /* unmask IRQs */ + if (hwif->io_ports.ctl_addr) + hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + } +} + /* * This routine sets up the IRQ for an IDE interface. */ @@ -831,9 +849,6 @@ static int init_irq (ide_hwif_t *hwif) if (irq_handler == NULL) irq_handler = ide_intr; - if (io_ports->ctl_addr) - hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; @@ -1404,6 +1419,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_port_tune_devices(hwif); } + ide_host_enable_irqs(host); + ide_host_for_each_port(i, hwif, host) { if (hwif == NULL) continue; diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 83b734aec92..52b25f8b111 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -880,6 +880,7 @@ static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud) } shost->hostdata[0] = (unsigned long)lu; + shost->max_cmd_len = SBP2_MAX_CDB_SIZE; if (!scsi_add_host(shost, &ud->device)) { lu->shost = shost; diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index c5036f1cc5b..64a3a66a8a3 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -25,6 +25,12 @@ #define SBP2_DEVICE_NAME "sbp2" /* + * There is no transport protocol limit to the CDB length, but we implement + * a fixed length only. 16 bytes is enough for disks larger than 2 TB. + */ +#define SBP2_MAX_CDB_SIZE 16 + +/* * SBP-2 specific definitions */ @@ -51,7 +57,7 @@ struct sbp2_command_orb { u32 data_descriptor_hi; u32 data_descriptor_lo; u32 misc; - u8 cdb[12]; + u8 cdb[SBP2_MAX_CDB_SIZE]; } __attribute__((packed)); #define SBP2_LOGIN_REQUEST 0x0 diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9d8f796c674..a6b989a9dc0 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,50 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. + module will be called ep93xx_keypad. -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA - help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called amikbd. + module will be called gpio_keys. -config ATARI_KBD_CORE - bool - -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Enable support for GPIO driven matrix keypad. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -261,20 +231,39 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO help - Say Y here if you want to use the OMAP keypad. + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. @@ -288,51 +277,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -344,13 +320,45 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. -config KEYBOARD_EP93XX - tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) help - Say Y here to enable the matrix keypad on the Cirrus EP93XX. + Say Y here if you want to use the OMAP keypad. To compile this driver as a module, choose M here: the - module will be called ep93xx_keypad. + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 156b647a259..b5b5eae9724 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,29 +4,30 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o -obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o -obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o -obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o -obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o +obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o +obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o -obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o -obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o -obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o -obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 2157cd7de00..efed0c9e242 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -29,7 +29,8 @@ struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; - struct delayed_work work; + struct timer_list timer; + struct work_struct work; }; struct gpio_keys_drvdata { @@ -40,7 +41,7 @@ struct gpio_keys_drvdata { static void gpio_keys_report_event(struct work_struct *work) { struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work.work); + container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -50,17 +51,25 @@ static void gpio_keys_report_event(struct work_struct *work) input_sync(input); } +static void gpio_keys_timer(unsigned long _data) +{ + struct gpio_button_data *data = (struct gpio_button_data *)_data; + + schedule_work(&data->work); +} + static irqreturn_t gpio_keys_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; struct gpio_keys_button *button = bdata->button; - unsigned long delay; BUG_ON(irq != gpio_to_irq(button->gpio)); - delay = button->debounce_interval ? - msecs_to_jiffies(button->debounce_interval) : 0; - schedule_delayed_work(&bdata->work, delay); + if (button->debounce_interval) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(button->debounce_interval)); + else + schedule_work(&bdata->work); return IRQ_HANDLED; } @@ -107,7 +116,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; - INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event); + setup_timer(&bdata->timer, + gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_report_event); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -166,7 +177,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail2: while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } @@ -190,7 +203,9 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 00000000000..e9b2e7cb05b --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,453 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/input/matrix_keypad.h> + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned short *keycodes; + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + bool scan_pending; + bool stopped; + spinlock_t lock; +}; + +/* + * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause + * minmal side effect when scanning other columns, here it is configured to + * be input, and it should work on most platforms. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = (row << 4) + col; + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = true; + mb(); + flush_work(&keypad->work.work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM +static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + return 0; +} + +static int matrix_keypad_resume(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#else +#define matrix_keypad_suspend NULL +#define matrix_keypad_resume NULL +#endif + +static int __devinit init_matrix_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err = -EINVAL; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static int __devinit matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + unsigned short *keycodes; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!keymap_data->max_keymap_size) { + dev_err(&pdev->dev, "invalid keymap data supplied\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + keycodes = kzalloc(keymap_data->max_keymap_size * + sizeof(keypad->keycodes), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !keycodes || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->keycodes = keycodes; + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + input_dev->keycode = keycodes; + input_dev->keycodesize = sizeof(*keycodes); + input_dev->keycodemax = keymap_data->max_keymap_size; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keycodes[(row << 4) + col] = code; + __set_bit(code, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = init_matrix_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_mem; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_mem: + input_free_device(input_dev); + kfree(keycodes); + kfree(keypad); + return err; +} + +static int __devexit matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + device_init_wakeup(&pdev->dev, 0); + + for (i = 0; i < pdata->num_row_gpios; i++) { + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + gpio_free(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); + + input_unregister_device(keypad->input_dev); + platform_set_drvdata(pdev, NULL); + kfree(keypad->keycodes); + kfree(keypad); + + return 0; +} + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = __devexit_p(matrix_keypad_remove), + .suspend = matrix_keypad_suspend, + .resume = matrix_keypad_resume, + .driver = { + .name = "matrix-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init matrix_keypad_init(void) +{ + return platform_driver_register(&matrix_keypad_driver); +} + +static void __exit matrix_keypad_exit(void) +{ + platform_driver_unregister(&matrix_keypad_driver); +} + +module_init(matrix_keypad_init); +module_exit(matrix_keypad_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index 2adf9cb265d..d114d3a9e1e 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -1,7 +1,7 @@ /* * Cobalt button interface driver. * - * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -148,7 +148,7 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev) return 0; } -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_DESCRIPTION("Cobalt button interface driver"); MODULE_LICENSE("GPL"); /* work with hotplug and coldplug */ diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 5e5eb88d8d1..7b6ce178f1b 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -46,7 +46,7 @@ static void gpio_mouse_scan(struct input_polled_dev *dev) input_sync(input); } -static int __init gpio_mouse_probe(struct platform_device *pdev) +static int __devinit gpio_mouse_probe(struct platform_device *pdev) { struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; struct input_polled_dev *input_poll; @@ -170,10 +170,8 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev) return 0; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:gpio_mouse"); - static struct platform_driver gpio_mouse_device_driver = { + .probe = gpio_mouse_probe, .remove = __devexit_p(gpio_mouse_remove), .driver = { .name = "gpio_mouse", @@ -183,8 +181,7 @@ static struct platform_driver gpio_mouse_device_driver = { static int __init gpio_mouse_init(void) { - return platform_driver_probe(&gpio_mouse_device_driver, - gpio_mouse_probe); + return platform_driver_register(&gpio_mouse_device_driver); } module_init(gpio_mouse_init); @@ -197,3 +194,5 @@ module_exit(gpio_mouse_exit); MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); MODULE_DESCRIPTION("GPIO mouse driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */ + diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fb8a3cd3ffd..924e8ed7f2c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -392,6 +392,34 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), }, }, + { + .ident = "Acer Aspire One 150", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), + }, + }, + { + .ident = "Advent 4211", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), + DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), + }, + }, + { + .ident = "Medion Akoya Mini E1210", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), + }, + }, + { + .ident = "Mivvy M310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), + DMI_MATCH(DMI_PRODUCT_NAME, "N10"), + }, + }, { } }; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index f919bf57293..582245c497e 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -934,10 +934,11 @@ static bool i8042_suspended; static int i8042_suspend(struct platform_device *dev, pm_message_t state) { - if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) { + if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) i8042_controller_reset(); - i8042_suspended = true; - } + + i8042_suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index fb17573f8f2..d66f4944f2a 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -935,10 +935,11 @@ static int serio_suspend(struct device *dev, pm_message_t state) { struct serio *serio = to_serio_port(dev); - if (!serio->suspended && state.event == PM_EVENT_SUSPEND) { + if (!serio->suspended && state.event == PM_EVENT_SUSPEND) serio_cleanup(serio); - serio->suspended = true; - } + + serio->suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 38bf86384ae..c896d6a21b7 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -384,6 +384,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS2, 0); wacom_report_key(wcombo, BTN_TOUCH, 0); wacom_report_abs(wcombo, ABS_WHEEL, 0); + if (wacom->features->type >= INTUOS3S) + wacom_report_abs(wcombo, ABS_Z, 0); } wacom_report_key(wcombo, wacom->tool[idx], 0); wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ @@ -836,6 +838,7 @@ static struct wacom_features wacom_features[] = { { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, + { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL }, { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, @@ -897,8 +900,9 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9b60b6b684d..7c8e7122aaa 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -75,6 +75,7 @@ config LEDS_ALIX2 depends on LEDS_CLASS && X86 && EXPERIMENTAL help This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. + You have to set leds-alix2.force=1 for boards with Award BIOS. config LEDS_H1940 tristate "LED Support for iPAQ H1940 device" @@ -145,15 +146,16 @@ config LEDS_GPIO_OF of_platform devices. For instance, LEDs which are listed in a "dts" file. -config LEDS_LP5521 - tristate "LED Support for the LP5521 LEDs" +config LEDS_LP3944 + tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" depends on LEDS_CLASS && I2C help - If you say 'Y' here you get support for the National Semiconductor - LP5521 LED driver used in n8x0 boards. + This option enables support for LEDs connected to the National + Semiconductor LP3944 Lighting Management Unit (LMU) also known as + Fun Light Chip. - This driver can be built as a module by choosing 'M'. The module - will be called leds-lp5521. + To compile this driver as a module, choose M here: the + module will be called leds-lp3944. config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 2d41c4dcf92..e8cdcf77a4c 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o +obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index ddbd7730dfc..731d4eef342 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -14,7 +14,7 @@ static int force = 0; module_param(force, bool, 0444); -MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs"); +MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); struct alix_led { struct led_classdev cdev; @@ -155,6 +155,11 @@ static int __init alix_led_init(void) goto out; } + /* enable output on GPIO for LED 1,2,3 */ + outl(1 << 6, 0x6104); + outl(1 << 9, 0x6184); + outl(1 << 11, 0x6184); + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { ret = platform_driver_probe(&alix_led_driver, alix_led_probe); diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 4149ecb3a9b..779d7f262c0 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -97,6 +97,10 @@ struct bd2802_led { enum led_ids led_id; enum led_colors color; enum led_bits state; + + /* General attributes of RGB LEDs */ + int wave_pattern; + int rgb_current; }; @@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id, bd2802_reset_cancel(led); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); @@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id, reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); - bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF); + bd2802_write_byte(led->client, reg, led->wave_pattern); bd2802_enable(led, id); bd2802_update_state(led, id, color, BD2802_BLINK); @@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led) ret = device_create_file(&led->client->dev, bd2802_addr_attributes[i]); if (ret) { - dev_err(&led->client->dev, "failed to sysfs file %s\n", + dev_err(&led->client->dev, "failed: sysfs file %s\n", bd2802_addr_attributes[i]->attr.name); goto failed_remove_files; } @@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = { .store = bd2802_store_adv_conf, }; +#define BD2802_CONTROL_ATTR(attr_name, name_str) \ +static ssize_t bd2802_show_##attr_name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + ssize_t ret; \ + down_read(&led->rwsem); \ + ret = sprintf(buf, "0x%02x\n", led->attr_name); \ + up_read(&led->rwsem); \ + return ret; \ +} \ +static ssize_t bd2802_store_##attr_name(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + unsigned long val; \ + int ret; \ + if (!count) \ + return -EINVAL; \ + ret = strict_strtoul(buf, 16, &val); \ + if (ret) \ + return ret; \ + down_write(&led->rwsem); \ + led->attr_name = val; \ + up_write(&led->rwsem); \ + return count; \ +} \ +static struct device_attribute bd2802_##attr_name##_attr = { \ + .attr = { \ + .name = name_str, \ + .mode = 0644, \ + .owner = THIS_MODULE \ + }, \ + .show = bd2802_show_##attr_name, \ + .store = bd2802_store_##attr_name, \ +}; + +BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern"); +BD2802_CONTROL_ATTR(rgb_current, "rgb_current"); + +static struct device_attribute *bd2802_attributes[] = { + &bd2802_adv_conf_attr, + &bd2802_wave_pattern_attr, + &bd2802_rgb_current_attr, +}; + static void bd2802_led_work(struct work_struct *work) { struct bd2802_led *led = container_of(work, struct bd2802_led, work); @@ -538,7 +588,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1r.brightness = LED_OFF; led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness; led->cdev_led1r.blink_set = bd2802_set_led1r_blink; - led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1r); if (ret < 0) { @@ -551,7 +600,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1g.brightness = LED_OFF; led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness; led->cdev_led1g.blink_set = bd2802_set_led1g_blink; - led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1g); if (ret < 0) { @@ -564,7 +612,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1b.brightness = LED_OFF; led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness; led->cdev_led1b.blink_set = bd2802_set_led1b_blink; - led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1b); if (ret < 0) { @@ -577,7 +624,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led2r.brightness = LED_OFF; led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness; led->cdev_led2r.blink_set = bd2802_set_led2r_blink; - led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led2r); if (ret < 0) { @@ -590,7 +636,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led2g.brightness = LED_OFF; led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness; led->cdev_led2g.blink_set = bd2802_set_led2g_blink; - led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led2g); if (ret < 0) { @@ -640,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client, { struct bd2802_led *led; struct bd2802_led_platform_data *pdata; - int ret; + int ret, i; led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL); if (!led) { @@ -670,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client, /* To save the power, reset BD2802 after detecting */ gpio_set_value(led->pdata->reset_gpio, 0); + /* Default attributes */ + led->wave_pattern = BD2802_PATTERN_HALF; + led->rgb_current = BD2802_CURRENT_032; + init_rwsem(&led->rwsem); - ret = device_create_file(&client->dev, &bd2802_adv_conf_attr); - if (ret) { - dev_err(&client->dev, "failed to create sysfs file %s\n", - bd2802_adv_conf_attr.attr.name); - goto failed_free; + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) { + ret = device_create_file(&led->client->dev, + bd2802_attributes[i]); + if (ret) { + dev_err(&led->client->dev, "failed: sysfs file %s\n", + bd2802_attributes[i]->attr.name); + goto failed_unregister_dev_file; + } } ret = bd2802_register_led_classdev(led); @@ -686,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client, return 0; failed_unregister_dev_file: - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i--; i >= 0; i--) + device_remove_file(&led->client->dev, bd2802_attributes[i]); failed_free: i2c_set_clientdata(client, NULL); kfree(led); @@ -697,12 +750,14 @@ failed_free: static int __exit bd2802_remove(struct i2c_client *client) { struct bd2802_led *led = i2c_get_clientdata(client); + int i; - bd2802_unregister_led_classdev(led); gpio_set_value(led->pdata->reset_gpio, 0); + bd2802_unregister_led_classdev(led); if (led->adf_on) bd2802_disable_adv_conf(led); - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) + device_remove_file(&led->client->dev, bd2802_attributes[i]); i2c_set_clientdata(client, NULL); kfree(led); @@ -723,8 +778,7 @@ static int bd2802_resume(struct i2c_client *client) struct bd2802_led *led = i2c_get_clientdata(client); if (!bd2802_is_all_off(led) || led->adf_on) { - gpio_set_value(led->pdata->reset_gpio, 1); - udelay(100); + bd2802_reset_cancel(led); bd2802_restore_state(led); } @@ -762,4 +816,4 @@ module_exit(bd2802_exit); MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); MODULE_DESCRIPTION("BD2802 LED driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index ff0e8c3fbf9..5f1ce810815 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -1,7 +1,7 @@ /* * LEDs driver for the Cobalt Raq series. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index d2109054de8..6b06638eb5b 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -76,7 +76,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, struct gpio_led_data *led_dat, struct device *parent, int (*blink_set)(unsigned, unsigned long *, unsigned long *)) { - int ret; + int ret, state; /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { @@ -99,11 +99,15 @@ static int __devinit create_gpio_led(const struct gpio_led *template, led_dat->cdev.blink_set = gpio_blink_set; } led_dat->cdev.brightness_set = gpio_led_set; - led_dat->cdev.brightness = LED_OFF; + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) + state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low; + else + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; if (!template->retain_state_suspended) led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - ret = gpio_direction_output(led_dat->gpio, led_dat->active_low); + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); if (ret < 0) goto err; @@ -129,7 +133,7 @@ static void delete_gpio_led(struct gpio_led_data *led) } #ifdef CONFIG_LEDS_GPIO_PLATFORM -static int gpio_led_probe(struct platform_device *pdev) +static int __devinit gpio_led_probe(struct platform_device *pdev) { struct gpio_led_platform_data *pdata = pdev->dev.platform_data; struct gpio_led_data *leds_data; @@ -223,12 +227,22 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev, memset(&led, 0, sizeof(led)); for_each_child_of_node(np, child) { enum of_gpio_flags flags; + const char *state; led.gpio = of_get_gpio_flags(child, 0, &flags); led.active_low = flags & OF_GPIO_ACTIVE_LOW; led.name = of_get_property(child, "label", NULL) ? : child->name; led.default_trigger = of_get_property(child, "linux,default-trigger", NULL); + state = of_get_property(child, "default-state", NULL); + if (state) { + if (!strcmp(state, "keep")) + led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + else if(!strcmp(state, "on")) + led.default_state = LEDS_GPIO_DEFSTATE_ON; + else + led.default_state = LEDS_GPIO_DEFSTATE_OFF; + } ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++], &ofdev->dev, NULL); diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c new file mode 100644 index 00000000000..5946208ba26 --- /dev/null +++ b/drivers/leds/leds-lp3944.c @@ -0,0 +1,466 @@ +/* + * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip + * + * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* + * I2C driver for National Semiconductor LP3944 Funlight Chip + * http://www.national.com/pf/LP/LP3944.html + * + * This helper chip can drive up to 8 leds, with two programmable DIM modes; + * it could even be used as a gpio expander but this driver assumes it is used + * as a led controller. + * + * The DIM modes are used to set _blink_ patterns for leds, the pattern is + * specified supplying two parameters: + * - period: from 0s to 1.6s + * - duty cycle: percentage of the period the led is on, from 0 to 100 + * + * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb + * leds, the camera flash light and the displays backlights. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/mutex.h> +#include <linux/workqueue.h> +#include <linux/leds-lp3944.h> + +/* Read Only Registers */ +#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */ +#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */ + +#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */ +#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */ +#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */ +#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */ +#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */ +#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */ + +/* These registers are not used to control leds in LP3944, they can store + * arbitrary values which the chip will ignore. + */ +#define LP3944_REG_REGISTER8 0x08 +#define LP3944_REG_REGISTER9 0x09 + +#define LP3944_DIM0 0 +#define LP3944_DIM1 1 + +/* period in ms */ +#define LP3944_PERIOD_MIN 0 +#define LP3944_PERIOD_MAX 1600 + +/* duty cycle is a percentage */ +#define LP3944_DUTY_CYCLE_MIN 0 +#define LP3944_DUTY_CYCLE_MAX 100 + +#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev) + +/* Saved data */ +struct lp3944_led_data { + u8 id; + enum lp3944_type type; + enum lp3944_status status; + struct led_classdev ldev; + struct i2c_client *client; + struct work_struct work; +}; + +struct lp3944_data { + struct mutex lock; + struct i2c_client *client; + struct lp3944_led_data leds[LP3944_LEDS_MAX]; +}; + +static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value) +{ + int tmp; + + tmp = i2c_smbus_read_byte_data(client, reg); + if (tmp < 0) + return -EINVAL; + + *value = tmp; + + return 0; +} + +static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/** + * Set the period for DIM status + * + * @client: the i2c client + * @dim: either LP3944_DIM0 or LP3944_DIM1 + * @period: period of a blink, that is a on/off cycle, expressed in ms. + */ +static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period) +{ + u8 psc_reg; + u8 psc_value; + int err; + + if (dim == LP3944_DIM0) + psc_reg = LP3944_REG_PSC0; + else if (dim == LP3944_DIM1) + psc_reg = LP3944_REG_PSC1; + else + return -EINVAL; + + /* Convert period to Prescaler value */ + if (period > LP3944_PERIOD_MAX) + return -EINVAL; + + psc_value = (period * 255) / LP3944_PERIOD_MAX; + + err = lp3944_reg_write(client, psc_reg, psc_value); + + return err; +} + +/** + * Set the duty cycle for DIM status + * + * @client: the i2c client + * @dim: either LP3944_DIM0 or LP3944_DIM1 + * @duty_cycle: percentage of a period during which a led is ON + */ +static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim, + u8 duty_cycle) +{ + u8 pwm_reg; + u8 pwm_value; + int err; + + if (dim == LP3944_DIM0) + pwm_reg = LP3944_REG_PWM0; + else if (dim == LP3944_DIM1) + pwm_reg = LP3944_REG_PWM1; + else + return -EINVAL; + + /* Convert duty cycle to PWM value */ + if (duty_cycle > LP3944_DUTY_CYCLE_MAX) + return -EINVAL; + + pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX; + + err = lp3944_reg_write(client, pwm_reg, pwm_value); + + return err; +} + +/** + * Set the led status + * + * @led: a lp3944_led_data structure + * @status: one of LP3944_LED_STATUS_OFF + * LP3944_LED_STATUS_ON + * LP3944_LED_STATUS_DIM0 + * LP3944_LED_STATUS_DIM1 + */ +static int lp3944_led_set(struct lp3944_led_data *led, u8 status) +{ + struct lp3944_data *data = i2c_get_clientdata(led->client); + u8 id = led->id; + u8 reg; + u8 val = 0; + int err; + + dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n", + __func__, led->ldev.name, status); + + switch (id) { + case LP3944_LED0: + case LP3944_LED1: + case LP3944_LED2: + case LP3944_LED3: + reg = LP3944_REG_LS0; + break; + case LP3944_LED4: + case LP3944_LED5: + case LP3944_LED6: + case LP3944_LED7: + id -= LP3944_LED4; + reg = LP3944_REG_LS1; + break; + default: + return -EINVAL; + } + + if (status > LP3944_LED_STATUS_DIM1) + return -EINVAL; + + /* invert only 0 and 1, leave unchanged the other values, + * remember we are abusing status to set blink patterns + */ + if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2) + status = 1 - status; + + mutex_lock(&data->lock); + lp3944_reg_read(led->client, reg, &val); + + val &= ~(LP3944_LED_STATUS_MASK << (id << 1)); + val |= (status << (id << 1)); + + dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n", + __func__, led->ldev.name, reg, id, status, val); + + /* set led status */ + err = lp3944_reg_write(led->client, reg, val); + mutex_unlock(&data->lock); + + return err; +} + +static int lp3944_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct lp3944_led_data *led = ldev_to_led(led_cdev); + u16 period; + u8 duty_cycle; + int err; + + /* units are in ms */ + if (*delay_on + *delay_off > LP3944_PERIOD_MAX) + return -EINVAL; + + if (*delay_on == 0 && *delay_off == 0) { + /* Special case: the leds subsystem requires a default user + * friendly blink pattern for the LED. Let's blink the led + * slowly (1Hz). + */ + *delay_on = 500; + *delay_off = 500; + } + + period = (*delay_on) + (*delay_off); + + /* duty_cycle is the percentage of period during which the led is ON */ + duty_cycle = 100 * (*delay_on) / period; + + /* invert duty cycle for inverted leds, this has the same effect of + * swapping delay_on and delay_off + */ + if (led->type == LP3944_LED_TYPE_LED_INVERTED) + duty_cycle = 100 - duty_cycle; + + /* NOTE: using always the first DIM mode, this means that all leds + * will have the same blinking pattern. + * + * We could find a way later to have two leds blinking in hardware + * with different patterns at the same time, falling back to software + * control for the other ones. + */ + err = lp3944_dim_set_period(led->client, LP3944_DIM0, period); + if (err) + return err; + + err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle); + if (err) + return err; + + dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n", + __func__); + + led->status = LP3944_LED_STATUS_DIM0; + schedule_work(&led->work); + + return 0; +} + +static void lp3944_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct lp3944_led_data *led = ldev_to_led(led_cdev); + + dev_dbg(&led->client->dev, "%s: %s, %d\n", + __func__, led_cdev->name, brightness); + + led->status = brightness; + schedule_work(&led->work); +} + +static void lp3944_led_work(struct work_struct *work) +{ + struct lp3944_led_data *led; + + led = container_of(work, struct lp3944_led_data, work); + lp3944_led_set(led, led->status); +} + +static int lp3944_configure(struct i2c_client *client, + struct lp3944_data *data, + struct lp3944_platform_data *pdata) +{ + int i, err = 0; + + for (i = 0; i < pdata->leds_size; i++) { + struct lp3944_led *pled = &pdata->leds[i]; + struct lp3944_led_data *led = &data->leds[i]; + led->client = client; + led->id = i; + + switch (pled->type) { + + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led->type = pled->type; + led->status = pled->status; + led->ldev.name = pled->name; + led->ldev.max_brightness = 1; + led->ldev.brightness_set = lp3944_led_set_brightness; + led->ldev.blink_set = lp3944_led_set_blink; + led->ldev.flags = LED_CORE_SUSPENDRESUME; + + INIT_WORK(&led->work, lp3944_led_work); + err = led_classdev_register(&client->dev, &led->ldev); + if (err < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led->ldev.name); + goto exit; + } + + /* to expose the default value to userspace */ + led->ldev.brightness = led->status; + + /* Set the default led status */ + err = lp3944_led_set(led, led->status); + if (err < 0) { + dev_err(&client->dev, + "%s couldn't set STATUS %d\n", + led->ldev.name, led->status); + goto exit; + } + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + + } + } + return 0; + +exit: + if (i > 0) + for (i = i - 1; i >= 0; i--) + switch (pdata->leds[i].type) { + + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + } + + return err; +} + +static int __devinit lp3944_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data; + struct lp3944_data *data; + + if (lp3944_pdata == NULL) { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + + /* Let's see whether this adapter can support what we need. */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "insufficient functionality!\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + dev_info(&client->dev, "lp3944 enabled\n"); + + lp3944_configure(client, data, lp3944_pdata); + return 0; +} + +static int __devexit lp3944_remove(struct i2c_client *client) +{ + struct lp3944_platform_data *pdata = client->dev.platform_data; + struct lp3944_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->leds_size; i++) + switch (data->leds[i].type) { + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + } + + kfree(data); + i2c_set_clientdata(client, NULL); + + return 0; +} + +/* lp3944 i2c driver struct */ +static const struct i2c_device_id lp3944_id[] = { + {"lp3944", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lp3944_id); + +static struct i2c_driver lp3944_driver = { + .driver = { + .name = "lp3944", + }, + .probe = lp3944_probe, + .remove = __devexit_p(lp3944_remove), + .id_table = lp3944_id, +}; + +static int __init lp3944_module_init(void) +{ + return i2c_add_driver(&lp3944_driver); +} + +static void __exit lp3944_module_exit(void) +{ + i2c_del_driver(&lp3944_driver); +} + +module_init(lp3944_module_init); +module_exit(lp3944_module_exit); + +MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>"); +MODULE_DESCRIPTION("LP3944 Fun Light Chip"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index 3937244fdca..dba8921240f 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -35,7 +35,7 @@ struct pca9532_data { struct pca9532_led leds[16]; struct mutex update_lock; struct input_dev *idev; - struct work_struct work; + struct work_struct work; u8 pwm[2]; u8 psc[2]; }; @@ -87,14 +87,14 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink, if (b > 0xFF) return -EINVAL; data->pwm[pwm] = b; - data->psc[pwm] = blink; - return 0; + data->psc[pwm] = blink; + return 0; } static int pca9532_setpwm(struct i2c_client *client, int pwm) { - struct pca9532_data *data = i2c_get_clientdata(client); - mutex_lock(&data->update_lock); + struct pca9532_data *data = i2c_get_clientdata(client); + mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm), data->pwm[pwm]); i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm), @@ -132,11 +132,11 @@ static void pca9532_set_brightness(struct led_classdev *led_cdev, led->state = PCA9532_ON; else { led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */ - err = pca9532_calcpwm(led->client, 0, 0, value); + err = pca9532_calcpwm(led->client, 0, 0, value); if (err) return; /* XXX: led api doesn't allow error code? */ } - schedule_work(&led->work); + schedule_work(&led->work); } static int pca9532_set_blink(struct led_classdev *led_cdev, @@ -145,7 +145,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, struct pca9532_led *led = ldev_to_led(led_cdev); struct i2c_client *client = led->client; int psc; - int err = 0; + int err = 0; if (*delay_on == 0 && *delay_off == 0) { /* led subsystem ask us for a blink rate */ @@ -157,11 +157,11 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, /* Thecus specific: only use PSC/PWM 0 */ psc = (*delay_on * 152-1)/1000; - err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); - if (err) - return err; - schedule_work(&led->work); - return 0; + err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); + if (err) + return err; + schedule_work(&led->work); + return 0; } static int pca9532_event(struct input_dev *dev, unsigned int type, @@ -178,15 +178,15 @@ static int pca9532_event(struct input_dev *dev, unsigned int type, else data->pwm[1] = 0; - schedule_work(&data->work); + schedule_work(&data->work); - return 0; + return 0; } static void pca9532_input_work(struct work_struct *work) { - struct pca9532_data *data; - data = container_of(work, struct pca9532_data, work); + struct pca9532_data *data; + data = container_of(work, struct pca9532_data, work); mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1), data->pwm[1]); @@ -195,11 +195,11 @@ static void pca9532_input_work(struct work_struct *work) static void pca9532_led_work(struct work_struct *work) { - struct pca9532_led *led; - led = container_of(work, struct pca9532_led, work); - if (led->state == PCA9532_PWM0) - pca9532_setpwm(led->client, 0); - pca9532_setled(led); + struct pca9532_led *led; + led = container_of(work, struct pca9532_led, work); + if (led->state == PCA9532_PWM0) + pca9532_setpwm(led->client, 0); + pca9532_setled(led); } static int pca9532_configure(struct i2c_client *client, @@ -232,7 +232,7 @@ static int pca9532_configure(struct i2c_client *client, led->ldev.brightness = LED_OFF; led->ldev.brightness_set = pca9532_set_brightness; led->ldev.blink_set = pca9532_set_blink; - INIT_WORK(&led->work, pca9532_led_work); + INIT_WORK(&led->work, pca9532_led_work); err = led_classdev_register(&client->dev, &led->ldev); if (err < 0) { dev_err(&client->dev, @@ -262,11 +262,11 @@ static int pca9532_configure(struct i2c_client *client, BIT_MASK(SND_TONE); data->idev->event = pca9532_event; input_set_drvdata(data->idev, data); - INIT_WORK(&data->work, pca9532_input_work); + INIT_WORK(&data->work, pca9532_input_work); err = input_register_device(data->idev); if (err) { input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; goto exit; } @@ -283,13 +283,13 @@ exit: break; case PCA9532_TYPE_LED: led_classdev_unregister(&data->leds[i].ldev); - cancel_work_sync(&data->leds[i].work); + cancel_work_sync(&data->leds[i].work); break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { input_unregister_device(data->idev); input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; } break; @@ -340,13 +340,13 @@ static int pca9532_remove(struct i2c_client *client) break; case PCA9532_TYPE_LED: led_classdev_unregister(&data->leds[i].ldev); - cancel_work_sync(&data->leds[i].work); + cancel_work_sync(&data->leds[i].work); break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { input_unregister_device(data->idev); input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; } break; diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index d4e8979735c..9c3138265f8 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -82,7 +82,7 @@ struct lg_cpu { struct lg_eventfd { unsigned long addr; - struct file *event; + struct eventfd_ctx *event; }; struct lg_eventfd_map { diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 32e29712105..9f9a2953b38 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -50,7 +50,7 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) /* Now append new entry. */ new->map[new->num].addr = addr; - new->map[new->num].event = eventfd_fget(fd); + new->map[new->num].event = eventfd_ctx_fdget(fd); if (IS_ERR(new->map[new->num].event)) { kfree(new); return PTR_ERR(new->map[new->num].event); @@ -357,7 +357,7 @@ static int close(struct inode *inode, struct file *file) /* Release any eventfds they registered. */ for (i = 0; i < lg->eventfds->num; i++) - fput(lg->eventfds->map[i].event); + eventfd_ctx_put(lg->eventfds->map[i].event); kfree(lg->eventfds); /* If lg->dead doesn't contain an error code it will be NULL or a diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 6e149f4a1ff..a0f68386c12 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; +#ifdef CONFIG_PCI + /* Set the DMA ops to the ones from the PCI device, this could be + * fishy if we didn't know that on PowerMac it's always direct ops + * or iommu ops that will work fine + */ + dev->ofdev.dev.archdata.dma_ops = + chip->lbus.pdev->dev.archdata.dma_ops; + dev->ofdev.dev.archdata.dma_data = + chip->lbus.pdev->dev.archdata.dma_data; +#endif /* CONFIG_PCI */ + #ifdef DEBUG printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj); diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index c3ae51584b1..3710ff88fc1 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -195,7 +195,7 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv, struct dm_exception_store **store) { int r = 0; - struct dm_exception_store_type *type; + struct dm_exception_store_type *type = NULL; struct dm_exception_store *tmp_store; char persistent; @@ -211,12 +211,15 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv, } persistent = toupper(*argv[1]); - if (persistent != 'P' && persistent != 'N') { + if (persistent == 'P') + type = get_type("P"); + else if (persistent == 'N') + type = get_type("N"); + else { ti->error = "Persistent flag is not P or N"; return -EINVAL; } - type = get_type(&persistent); if (!type) { ti->error = "Exception store type not recognised"; r = -EINVAL; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 4899ebe767c..2cba557d9e6 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -495,7 +495,7 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, return 0; } - if (blk_stack_limits(limits, &q->limits, start) < 0) + if (blk_stack_limits(limits, &q->limits, start << 9) < 0) DMWARN("%s: target device %s is misaligned", dm_device_name(ti->table->md), bdevname(bdev, b)); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 3c6d4ee8921..9acd54a5cff 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1017,7 +1017,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_flags |= 1 << BIO_CLONED; if (bio_integrity(bio)) { - bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_clone(clone, bio, GFP_NOIO, bs); bio_integrity_trim(clone, bio_sector_offset(bio, idx, offset), len); } @@ -1045,7 +1045,7 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone->bi_flags &= ~(1 << BIO_SEG_VALID); if (bio_integrity(bio)) { - bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_clone(clone, bio, GFP_NOIO, bs); if (idx != bio->bi_idx || clone->bi_size < bio->bi_size) bio_integrity_trim(clone, diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 15c8b7b25a9..5810fa906af 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -166,8 +166,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) rdev->sectors = sectors * mddev->chunk_sectors; } - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/md.c b/drivers/md/md.c index 09be637d52c..d4351ff0849 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1756,9 +1756,10 @@ static void print_sb_1(struct mdp_superblock_1 *sb) __u8 *uuid; uuid = sb->set_uuid; - printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x" - ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n" - KERN_INFO "md: Name: \"%s\" CT:%llu\n", + printk(KERN_INFO + "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x" + ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n" + "md: Name: \"%s\" CT:%llu\n", le32_to_cpu(sb->major_version), le32_to_cpu(sb->feature_map), uuid[0], uuid[1], uuid[2], uuid[3], @@ -1770,12 +1771,13 @@ static void print_sb_1(struct mdp_superblock_1 *sb) & MD_SUPERBLOCK_1_TIME_SEC_MASK); uuid = sb->device_uuid; - printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu" + printk(KERN_INFO + "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu" " RO:%llu\n" - KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x" - ":%02x%02x%02x%02x%02x%02x\n" - KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n" - KERN_INFO "md: (MaxDev:%u) \n", + "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x" + ":%02x%02x%02x%02x%02x%02x\n" + "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n" + "md: (MaxDev:%u) \n", le32_to_cpu(sb->level), (unsigned long long)le64_to_cpu(sb->size), le32_to_cpu(sb->raid_disks), @@ -3573,7 +3575,8 @@ suspend_lo_store(mddev_t *mddev, const char *buf, size_t len) char *e; unsigned long long new = simple_strtoull(buf, &e, 10); - if (mddev->pers->quiesce == NULL) + if (mddev->pers == NULL || + mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; @@ -3601,7 +3604,8 @@ suspend_hi_store(mddev_t *mddev, const char *buf, size_t len) char *e; unsigned long long new = simple_strtoull(buf, &e, 10); - if (mddev->pers->quiesce == NULL) + if (mddev->pers == NULL || + mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; @@ -3844,11 +3848,9 @@ static int md_alloc(dev_t dev, char *name) flush_scheduled_work(); mutex_lock(&disks_mutex); - if (mddev->gendisk) { - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -EEXIST; - } + error = -EEXIST; + if (mddev->gendisk) + goto abort; if (name) { /* Need to ensure that 'name' is not a duplicate. @@ -3860,17 +3862,15 @@ static int md_alloc(dev_t dev, char *name) if (mddev2->gendisk && strcmp(mddev2->gendisk->disk_name, name) == 0) { spin_unlock(&all_mddevs_lock); - return -EEXIST; + goto abort; } spin_unlock(&all_mddevs_lock); } + error = -ENOMEM; mddev->queue = blk_alloc_queue(GFP_KERNEL); - if (!mddev->queue) { - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -ENOMEM; - } + if (!mddev->queue) + goto abort; mddev->queue->queuedata = mddev; /* Can be unlocked because the queue is new: no concurrency */ @@ -3880,11 +3880,9 @@ static int md_alloc(dev_t dev, char *name) disk = alloc_disk(1 << shift); if (!disk) { - mutex_unlock(&disks_mutex); blk_cleanup_queue(mddev->queue); mddev->queue = NULL; - mddev_put(mddev); - return -ENOMEM; + goto abort; } disk->major = MAJOR(mddev->unit); disk->first_minor = unit << shift; @@ -3906,16 +3904,22 @@ static int md_alloc(dev_t dev, char *name) mddev->gendisk = disk; error = kobject_init_and_add(&mddev->kobj, &md_ktype, &disk_to_dev(disk)->kobj, "%s", "md"); - mutex_unlock(&disks_mutex); - if (error) + if (error) { + /* This isn't possible, but as kobject_init_and_add is marked + * __must_check, we must do something with the result + */ printk(KERN_WARNING "md: cannot register %s/md - name in use\n", disk->disk_name); - else { + error = 0; + } + abort: + mutex_unlock(&disks_mutex); + if (!error) { kobject_uevent(&mddev->kobj, KOBJ_ADD); mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state"); } mddev_put(mddev); - return 0; + return error; } static struct kobject *md_probe(dev_t dev, int *part, void *data) @@ -6334,10 +6338,16 @@ void md_do_sync(mddev_t *mddev) sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } - if (j >= mddev->resync_max) - wait_event(mddev->recovery_wait, - mddev->resync_max > j - || kthread_should_stop()); + while (j >= mddev->resync_max && !kthread_should_stop()) { + /* As this condition is controlled by user-space, + * we can block indefinitely, so use '_interruptible' + * to avoid triggering warnings. + */ + flush_signals(current); /* just in case */ + wait_event_interruptible(mddev->recovery_wait, + mddev->resync_max > j + || kthread_should_stop()); + } if (kthread_should_stop()) goto interrupted; diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index cbe368fa659..237fe3fd235 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -294,7 +294,8 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for (path = first; path <= last; path++) if ((p=conf->multipaths+path)->rdev == NULL) { q = rdev->bdev->bd_disk->queue; - blk_queue_stack_limits(mddev->queue, q); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as @@ -463,9 +464,9 @@ static int multipath_run (mddev_t *mddev) disk = conf->multipaths + disk_idx; disk->rdev = rdev; + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); /* as we don't honour merge_bvec_fn, we must never risk * violating it, not that we ever expect a device with * a merge_bvec_fn to be involved in multipath */ diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index ab4a489d869..335f490dcad 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -170,8 +170,8 @@ static int create_strip_zones(mddev_t *mddev) } dev[j] = rdev1; - blk_queue_stack_limits(mddev->queue, - rdev1->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev1->bdev, + rdev1->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -250,6 +250,11 @@ static int create_strip_zones(mddev_t *mddev) mddev->chunk_sectors << 9); goto abort; } + + blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9); + blk_queue_io_opt(mddev->queue, + (mddev->chunk_sectors << 9) * mddev->raid_disks); + printk(KERN_INFO "raid0: done.\n"); mddev->private = conf; return 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 89939a7aef5..0569efba0c0 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1123,8 +1123,8 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for (mirror = first; mirror <= last; mirror++) if ( !(p=conf->mirrors+mirror)->rdev) { - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -1988,9 +1988,8 @@ static int run(mddev_t *mddev) disk = conf->mirrors + disk_idx; disk->rdev = rdev; - - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ae12ceafe10..7298a5e5a18 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1151,8 +1151,8 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for ( ; mirror <= last ; mirror++) if ( !(p=conf->mirrors+mirror)->rdev) { - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -2044,7 +2044,7 @@ raid10_size(mddev_t *mddev, sector_t sectors, int raid_disks) static int run(mddev_t *mddev) { conf_t *conf; - int i, disk_idx; + int i, disk_idx, chunk_size; mirror_info_t *disk; mdk_rdev_t *rdev; int nc, fc, fo; @@ -2130,6 +2130,14 @@ static int run(mddev_t *mddev) spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; + chunk_size = mddev->chunk_sectors << 9; + blk_queue_io_min(mddev->queue, chunk_size); + if (conf->raid_disks % conf->near_copies) + blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks); + else + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->raid_disks / conf->near_copies)); + list_for_each_entry(rdev, &mddev->disks, same_set) { disk_idx = rdev->raid_disk; if (disk_idx >= mddev->raid_disks @@ -2138,9 +2146,8 @@ static int run(mddev_t *mddev) disk = conf->mirrors + disk_idx; disk->rdev = rdev; - - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f9f991e6e13..37835538b58 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3699,13 +3699,21 @@ static int make_request(struct request_queue *q, struct bio * bi) goto retry; } } - /* FIXME what if we get a false positive because these - * are being updated. - */ - if (logical_sector >= mddev->suspend_lo && + + if (bio_data_dir(bi) == WRITE && + logical_sector >= mddev->suspend_lo && logical_sector < mddev->suspend_hi) { release_stripe(sh); - schedule(); + /* As the suspend_* range is controlled by + * userspace, we want an interruptible + * wait. + */ + flush_signals(current); + prepare_to_wait(&conf->wait_for_overlap, + &w, TASK_INTERRUPTIBLE); + if (logical_sector >= mddev->suspend_lo && + logical_sector < mddev->suspend_hi) + schedule(); goto retry; } @@ -4452,7 +4460,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) static int run(mddev_t *mddev) { raid5_conf_t *conf; - int working_disks = 0; + int working_disks = 0, chunk_size; mdk_rdev_t *rdev; if (mddev->recovery_cp != MaxSector) @@ -4607,6 +4615,14 @@ static int run(mddev_t *mddev) md_set_array_sectors(mddev, raid5_size(mddev, 0, 0)); blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec); + chunk_size = mddev->chunk_sectors << 9; + blk_queue_io_min(mddev->queue, chunk_size); + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->raid_disks - conf->max_degraded)); + + list_for_each_entry(rdev, &mddev->disks, same_set) + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); return 0; abort: diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index b6da9c3873f..aa20ce8cc66 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1096,8 +1096,19 @@ static int xc2028_set_params(struct dvb_frontend *fe, } /* All S-code tables need a 200kHz shift */ - if (priv->ctrl.demod) + if (priv->ctrl.demod) { demod = priv->ctrl.demod + 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + */ + if (type & DTV7) + demod += 500; + } return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0, demod); diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 68eb4493f99..d8d4214fd65 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -1,5 +1,6 @@ config TTPCI_EEPROM tristate + depends on I2C default n config DVB_AV7110 diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 640421ceb24..46d21632961 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file) video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); - goto done; + goto unlock; } /* stop rds reception */ @@ -1213,9 +1213,8 @@ static int si470x_fops_release(struct file *file) retval = si470x_stop(radio); usb_autopm_put_interface(radio->intf); } - +unlock: mutex_unlock(&radio->disconnect_lock); - done: return retval; } diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 061e147f6f2..84b6fc15519 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 7fb3add1b38..9f2e3214a48 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c92a25036f0..36f2d76006f 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, - .name = "Yuan MPC718", - .comment = "Analog video capture works; some audio line in may not.\n", + .name = "Yuan MPC718 MiniPCI DVB-T/Analog", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, - .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = { { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, - { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* Probably Samsung K4D263238G-VC33 memory */ - .chip_config = 0x003, - .refresh = 0x30c, - .timing1 = 0x23230b73, - .timing2 = 0x08, + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, .tune_lane = 0, .initial_emrs = 2, }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + /* FIXME - these GPIO's are just guesses */ + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x3, + .radio = 0x1 }, .xceive_pin = 0, .pci_list = cx18_pci_mpc718, .i2c = &cx18_i2c_std, diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index 6ea3fe623ef..51a0c33b25b 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -30,6 +30,10 @@ #include "s5h1409.h" #include "mxl5005s.h" #include "zl10353.h" + +#include <linux/firmware.h> +#include "mt352.h" +#include "mt352_priv.h" #include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_CLOCK_ENABLE2 0xc71024 #define CX18_DMUX_CLK_MASK 0x0080 +/* + * CX18_CARD_HVR_1600_ESMT + * CX18_CARD_HVR_1600_SAMSUNG + */ + static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, .if_freq = IF_FREQ_5380000HZ, @@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +/* + * CX18_CARD_LEADTEK_DVR3100H + */ /* Information/confirmation of proper config values provided by Terry Wu */ static struct zl10353_config leadtek_dvr3100h_demod = { .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ @@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = { .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; +/* + * CX18_CARD_YUAN_MPC718 + */ +/* + * Due to + * + * 1. an absence of information on how to prgram the MT352 + * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * + * We have to use an init sequence that *you* must extract from the Windows + * driver (yuanrap.sys) and which we load as a firmware. + * + * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual + * with chip programming details, then I can remove this annoyance. + */ +static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, + const struct firmware **fw) +{ + struct cx18 *cx = stream->cx; + const char *fn = "dvb-cx18-mpc718-mt352.fw"; + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); + if (ret) + CX18_ERR("Unable to open firmware file %s\n", fn); + else { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", + fn, (unsigned long) sz); + ret = -EILSEQ; + release_firmware(*fw); + *fw = NULL; + } + } + + if (ret) { + CX18_ERR("The MPC718 board variant with the MT352 DVB-T" + "demodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " + "mpc718' if you need the firmware\n"); + } + return ret; +} + +static int yuan_mpc718_mt352_init(struct dvb_frontend *fe) +{ + struct cx18_dvb *dvb = container_of(fe->dvb, + struct cx18_dvb, dvb_adapter); + struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb); + const struct firmware *fw = NULL; + int ret; + int i; + u8 buf[3]; + + ret = yuan_mpc718_mt352_reqfw(stream, &fw); + if (ret) + return ret; + + /* Loop through all the register-value pairs in the firmware file */ + for (i = 0; i < fw->size; i += 2) { + buf[0] = fw->data[i]; + /* Intercept a few registers we want to set ourselves */ + switch (buf[0]) { + case TRL_NOMINAL_RATE_0: + /* Set our custom OFDM bandwidth in the case below */ + break; + case TRL_NOMINAL_RATE_1: + /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */ + /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */ + /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */ + buf[1] = 0x72; + buf[2] = 0x49; + mt352_write(fe, buf, 3); + break; + case INPUT_FREQ_0: + /* Set our custom IF in the case below */ + break; + case INPUT_FREQ_1: + /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */ + buf[1] = 0x31; + buf[2] = 0xc0; + mt352_write(fe, buf, 3); + break; + default: + /* Pass through the register-value pair from the fw */ + buf[1] = fw->data[i+1]; + mt352_write(fe, buf, 2); + break; + } + } + + buf[0] = (u8) TUNER_GO; + buf[1] = 0x01; /* Go */ + mt352_write(fe, buf, 2); + release_firmware(fw); + return 0; +} + +static struct mt352_config yuan_mpc718_mt352_demod = { + .demod_address = 0x1e >> 1, + .adc_clock = 20480, /* 20.480 MHz */ + .if2 = 4560, /* 4.560 MHz */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .demod_init = yuan_mpc718_mt352_init, +}; + +static struct zl10353_config yuan_mpc718_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + static int dvb_register(struct cx18_stream *stream); /* Kernel DVB framework calls this when the feed needs to start. @@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) break; case CX18_CARD_LEADTEK_DVR3100H: + case CX18_CARD_YUAN_MPC718: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream) fe->ops.tuner_ops.set_config(fe, &ctrl); } break; + case CX18_CARD_YUAN_MPC718: + /* + * TODO + * Apparently, these cards also could instead have a + * DiBcom demod supported by one of the db7000 drivers + */ + dvb->fe = dvb_attach(mt352_attach, + &yuan_mpc718_mt352_demod, + &cx->i2c_adap[1]); + if (dvb->fe == NULL) + dvb->fe = dvb_attach(zl10353_attach, + &yuan_mpc718_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 48a975134ac..86ac529e62b 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -463,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (param->u.vsb.modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + } + return (port->set_frontend_save) ? + port->set_frontend_save(fe, param) : -ENODEV; +} + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -502,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr127x_config); } + + /* FIXME: temporary hack */ + /* define bridge override to set_frontend */ + port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend; + fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend; + break; case CX23885_BOARD_HAUPPAUGE_HVR1255: i2c_bus = &dev->i2c_bus[0]; diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 1a2ac518a3f..214a55e943b 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -288,6 +288,10 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; void *port_priv; + + /* FIXME: temporary hack */ + int (*set_frontend_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); }; struct cx23885_dev { diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 16a5af30e9d..6524b493e03 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c43fdb9bc88..ebd24a25fb8 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -58,6 +58,8 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); +#define MT9V011_VERSION 0x8243 + /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -191,6 +193,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -438,6 +447,18 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_27xx = 1, + .decoder = EM28XX_MT9V011, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -826,7 +847,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1639,6 +1660,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1678,6 +1704,46 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + if (dev->model != EM2820_BOARD_UNKNOWN) + return 0; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case MT9V011_VERSION: + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + break; + default: + printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -1706,7 +1772,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + if (dev->board.is_27xx) + em28xx_info("chip is em2710\n"); + else + em28xx_info("chip ID is em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -2158,6 +2227,10 @@ void em28xx_card_setup(struct em28xx *dev) before probing the i2c bus. */ em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2189,6 +2262,10 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->board.decoder == EM28XX_MT9V011) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2333,6 +2410,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + em28xx_hint_sensor(dev); + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2573,6 +2652,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = em28xx_init_dev(&dev, udev, interface, nr); if (retval) { em28xx_devused &= ~(1<<dev->devno); + mutex_unlock(&dev->lock); kfree(dev); goto err; } diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index c8d7ce8fbd3..079ab4d563a 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -648,17 +648,28 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; + int vinmode, vinctl, outfmt; + + outfmt = dev->format->reg; + + if (dev->board.is_27xx) { + vinmode = 0x0d; + vinctl = 0x00; + } else { + vinmode = 0x10; + vinctl = 0x11; + } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + outfmt | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -695,13 +706,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_27xx) { + /* FIXME: Don't use the scaler yet */ + mode = 0; + } else if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -720,8 +737,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index e7b47c8da8f..3da97c32b8f 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -243,6 +243,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -433,7 +441,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -444,6 +451,25 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_terratec_xs_zl10353_xc3028, + &dev->i2c_adap); + if (dvb->frontend == NULL) { + /* This board could have either a zl10353 or a mt352. + If the chip id isn't for zl10353, try mt352 */ + + /* FIXME: make support for mt352 work */ + printk(KERN_ERR "version of this board with mt352 not " + "currently supported\n"); + result = -EINVAL; + goto out_free; + } + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 2c86fcf089f..27e33a287df 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -483,7 +483,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8fe1beecfff..14316c91217 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -90,10 +90,35 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* supported video standards */ static struct em28xx_fmt format[] = { { - .name = "16bpp YUY2, 4:2:2, packed", + .name = "16 bpp YUY2, 4:2:2, packed", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB 565, LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_RGB_16_656, + }, { + .name = "8 bpp Bayer BGBG..GRGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, + }, { + .name = "8 bpp Bayer GRGR..BGBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GRGR, + }, { + .name = "8 bpp Bayer GBGB..RGRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "12 bpp YUV411", + .fourcc = V4L2_PIX_FMT_YUV411P, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, }, }; @@ -701,7 +726,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_em2800) { + if (dev->board.is_27xx) { + /* FIXME: This is the only supported fmt */ + width = 640; + height = 480; + } else if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ height = height > (3 * maxh / 4) ? maxh : maxh / 2; width = width > (3 * maxw / 4) ? maxw : maxw / 2; @@ -733,13 +762,40 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, + unsigned width, unsigned height) +{ + struct em28xx_fmt *fmt; + + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) { + width = 640; + height = 480; + } + + fmt = format_by_fourcc(fourcc); + if (!fmt) + return -EINVAL; + + dev->format = fmt; + dev->width = width; + dev->height = height; + + /* set new image size */ + get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); + + em28xx_set_alternate(dev); + em28xx_resolution_set(dev); + + return 0; +} + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_fmt *fmt; rc = check_dev(dev); if (rc < 0) @@ -749,12 +805,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, vidioc_try_fmt_vid_cap(file, priv, f); - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - rc = -EINVAL; - goto out; - } - if (videobuf_queue_is_busy(&fh->vb_vidq)) { em28xx_errdev("%s queue busy\n", __func__); rc = -EBUSY; @@ -767,16 +817,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - /* set new image size */ - dev->width = f->fmt.pix.width; - dev->height = f->fmt.pix.height; - dev->format = fmt; - get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - - em28xx_set_alternate(dev); - em28xx_resolution_set(dev); - - rc = 0; + rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); out: mutex_unlock(&dev->lock); @@ -1616,11 +1658,6 @@ static int em28xx_v4l2_open(struct file *filp) filp->private_data = fh; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->hscale = 0; - dev->vscale = 0; - em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); @@ -1962,15 +1999,14 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* set default norm */ dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; dev->ctl_input = 0; /* Analog specific initialization */ dev->format = &format[0]; + em28xx_set_video_format(dev, format[0].fourcc, + norm_maxw(dev), norm_maxh(dev)); + video_mux(dev, dev->ctl_input); /* Audio defaults */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 813ce45c2f9..d90fef46376 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -107,6 +107,7 @@ #define EM2860_BOARD_TERRATEC_AV350 68 #define EM2882_BOARD_KWORLD_ATSC_315U 69 #define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -360,6 +361,7 @@ enum em28xx_decoder { EM28XX_NODECODER, EM28XX_TVP5150, EM28XX_SAA711X, + EM28XX_MT9V011, }; enum em28xx_adecoder { @@ -388,6 +390,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_27xx:1; unsigned int valid:1; unsigned char xclk, i2c_speed; diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h index 9df7137fe67..992ce530f13 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -36,10 +36,6 @@ #define STV_ISOC_ENDPOINT_ADDR 0x81 -#ifndef V4L2_PIX_FMT_SGRBG8 -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') -#endif - #define STV_REG23 0x0423 /* Control registers of the STV0600 ASIC */ diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c new file mode 100644 index 00000000000..1fe8fc9183a --- /dev/null +++ b/drivers/media/video/mt9v011.c @@ -0,0 +1,431 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1000 }, + + { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (640 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); +}; + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, + .id_table = mt9v011_id, +}; diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h new file mode 100644 index 00000000000..9e443ee3055 --- /dev/null +++ b/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 16f595d4337..9f5ae816785 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -237,11 +237,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) return -ENOMEM; icd->num_user_formats = fmts; - fmts = 0; dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ + fmts = 0; for (i = 0; i < icd->num_formats; i++) if (!ici->ops->get_formats) { icd->user_formats[i].host_fmt = icd->formats + i; @@ -877,8 +877,11 @@ static int soc_camera_probe(struct device *dev) (unsigned short)~0; ret = soc_camera_init_user_formats(icd); - if (ret < 0) + if (ret < 0) { + if (icd->ops->remove) + icd->ops->remove(icd); goto eiufmt; + } icd->height = DEFAULT_HEIGHT; icd->width = DEFAULT_WIDTH; @@ -902,8 +905,10 @@ static int soc_camera_remove(struct device *dev) { struct soc_camera_device *icd = to_soc_camera_dev(dev); + mutex_lock(&icd->video_lock); if (icd->ops->remove) icd->ops->remove(icd); + mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1145,6 +1150,7 @@ evidallocd: } EXPORT_SYMBOL(soc_camera_video_start); +/* Called from client .remove() methods with .video_lock held */ void soc_camera_video_stop(struct soc_camera_device *icd) { struct video_device *vdev = icd->vdev; @@ -1154,10 +1160,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd) if (!icd->dev.parent || !vdev) return; - mutex_lock(&icd->video_lock); video_unregister_device(vdev); icd->vdev = NULL; - mutex_unlock(&icd->video_lock); } EXPORT_SYMBOL(soc_camera_video_stop); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index cd726685846..7705fc6baf0 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -343,6 +343,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -755,6 +802,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -893,53 +942,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -965,8 +967,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1357,6 +1357,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 7ac12cb0be4..5b6e58a3ba4 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -32,8 +32,7 @@ * This driver was tested with firmware revision A4. */ -#if defined(CONFIG_KEYBOARD_DM355EVM) \ - || defined(CONFIG_KEYBOARD_DM355EVM_MODULE) +#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE) #define msp_has_keyboard() true #else #define msp_has_keyboard() false diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index 671a7efe86a..c1de4afa89a 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -238,8 +238,10 @@ static irqreturn_t pcap_adc_irq(int irq, void *_pcap) mutex_lock(&pcap->adc_mutex); req = pcap->adc_queue[pcap->adc_head]; - if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) + if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) { + mutex_unlock(&pcap->adc_mutex); return IRQ_HANDLED; + } /* read requested channels results */ ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 4c7b7962f6b..0cc5eeff5ee 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -367,7 +367,8 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to) break; default: - return -1; + gate = -1; + goto already; } writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 8d1c60a3f0d..5d778ec8cdb 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -235,7 +235,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) skb->ip_summed = CHECKSUM_UNNECESSARY; dev_dbg(xpnet, "passing skb to network layer\n" - KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " + "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); @@ -399,7 +399,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, msg->buf_pa = xp_pa((void *)start_addr); dev_dbg(xpnet, "sending XPC message to %d:%d\n" - KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " + "msg->buf_pa=0x%lx, msg->size=%u, " "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, msg->leadin_ignore, msg->tailout_ignore); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 240608cc7ae..a461017ce5c 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1313,6 +1313,12 @@ static int mmc_spi_probe(struct spi_device *spi) struct mmc_spi_host *host; int status; + /* We rely on full duplex transfers, mostly to reduce + * per-transfer overheads (by making fewer transfers). + */ + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + return -EINVAL; + /* MMC and SD specs only seem to care that sampling is on the * rising edge ... meaning SPI modes 0 or 3. So either SPI mode * should be legit. We'll use mode 0 since the steady state is 0, diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 5011fa73f91..1479da6d3aa 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -194,7 +194,7 @@ static struct mtd_partition * newpart(char *s, parts[this_part].name = extra_mem; extra_mem += name_len + 1; - dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n", + dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n", this_part, parts[this_part].name, parts[this_part].offset, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 59c46126a5c..ae5fe91867e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */ +#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 73f05227dc8..d8cf29c01cc 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -226,7 +226,7 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate) if (!desperate && inftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free " "EUNs (%d)\n", inftl->numfreeEUNs); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -281,7 +281,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned silly = MAX_LOOPS; while (thisEUN < inftl->nb_blocks) { for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) { - if ((BlockMap[block] != 0xffff) || BlockDeleted[block]) + if ((BlockMap[block] != BLOCK_NIL) || + BlockDeleted[block]) continue; if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) @@ -525,7 +526,7 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) if (!silly--) { printk(KERN_WARNING "INFTL: infinite loop in " "Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -549,7 +550,7 @@ hitused: * waiting to be picked up. We're going to have to fold * a chain to make room. */ - thisEUN = INFTL_makefreeblock(inftl, 0xffff); + thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL); /* * Hopefully we free something, lets try again. @@ -631,7 +632,7 @@ hitused: printk(KERN_WARNING "INFTL: error folding to make room for Virtual " "Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index b08a798ee25..2aac41bde8b 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -42,10 +42,8 @@ #include <mach/hardware.h> #include <asm/system.h> -#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2) - struct armflash_subdev_info { - char name[SUBDEV_NAME_SIZE]; + char *name; struct mtd_info *mtd; struct map_info map; struct flash_platform_data *plat; @@ -134,6 +132,8 @@ static void armflash_subdev_remove(struct armflash_subdev_info *subdev) map_destroy(subdev->mtd); if (subdev->map.virt) iounmap(subdev->map.virt); + kfree(subdev->name); + subdev->name = NULL; release_mem_region(subdev->map.phys, subdev->map.size); } @@ -177,16 +177,22 @@ static int armflash_probe(struct platform_device *dev) if (nr == 1) /* No MTD concatenation, just use the default name */ - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s", - dev_name(&dev->dev)); + subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL); else - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d", - dev_name(&dev->dev), i); + subdev->name = kasprintf(GFP_KERNEL, "%s-%d", + dev_name(&dev->dev), i); + if (!subdev->name) { + err = -ENOMEM; + break; + } subdev->plat = plat; err = armflash_subdev_probe(subdev, res); - if (err) + if (err) { + kfree(subdev->name); + subdev->name = NULL; break; + } } info->nr_subdev = i; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 2802992b39d..20c828ba940 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -534,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) &num_partitions); if ((!partitions) || (num_partitions == 0)) { - printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n"); + printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n"); res = ENXIO; goto err_no_partitions; } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 0cd76f89f4b..ebd07e95b81 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -11,6 +11,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/sched.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -541,7 +543,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); unsigned long timeo = jiffies; - int status, state = this->state; + int status = NAND_STATUS_FAIL, state = this->state; if (state == FL_ERASING) timeo += (HZ * 400) / 1000; @@ -556,8 +558,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) while (time_before(jiffies, timeo)) { status = __raw_readb(this->IO_ADDR_R); - if (!(status & 0x40)) + if (status & NAND_STATUS_READY) break; + cond_resched(); } return status; } diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index e3f8495a94c..fb86cacd5bd 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -208,7 +208,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) /* Normally, we force a fold to happen before we run out of free blocks completely */ if (!desperate && nftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n"); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -230,11 +230,11 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) printk("Argh! No free blocks found! LastFreeEUN = %d, " "FirstEUN = %d\n", nftl->LastFreeEUN, le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); - return 0xffff; + return BLOCK_NIL; } } while (pot != nftl->LastFreeEUN); - return 0xffff; + return BLOCK_NIL; } static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) @@ -431,7 +431,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p /* add the header so that it is now a valid chain */ oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); - oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; + oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL; nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, 8, &retlen, (char *)&oob.u); @@ -515,7 +515,7 @@ static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) if (ChainLength < 2) { printk(KERN_WARNING "No Virtual Unit Chains available for folding. " "Failing request\n"); - return 0xffff; + return BLOCK_NIL; } return NFTL_foldchain (nftl, LongestChain, pendingblock); @@ -578,7 +578,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -601,7 +601,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) //u16 startEUN = nftl->EUNtable[thisVUC]; //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); - writeEUN = NFTL_makefreeblock(nftl, 0xffff); + writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL); if (writeEUN == BLOCK_NIL) { /* OK, we accept that the above comment is @@ -673,7 +673,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c index 85a18175730..08787f5a22a 100644 --- a/drivers/net/a2065.c +++ b/drivers/net/a2065.c @@ -569,16 +569,8 @@ static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) #ifdef DEBUG_DRIVER /* dump the packet */ - { - int i; - - for (i = 0; i < 64; i++) { - if ((i % 16) == 0) - printk("\n" KERN_DEBUG); - printk ("%2.2x ", skb->data [i]); - } - printk("\n"); - } + print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE, + 16, 1, skb->data, 64, true); #endif entry = lp->tx_new & lp->tx_ring_mod_mask; ib->btx_ring [entry].length = (-skblen) | 0xf000; diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index d6d4ab3b430..7d227cdab9f 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -158,15 +158,12 @@ module_exit(arcnet_exit); void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) { - int i; + char hdr[32]; - printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc); - for (i = 0; i < skb->len; i++) { - if (i % 16 == 0) - printk("\n" KERN_DEBUG "[%04X] ", i); - printk("%02X ", ((u_char *) skb->data)[i]); - } - printk("\n"); + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, skb->data, skb->len, true); } EXPORT_SYMBOL(arcnet_dump_skb); @@ -184,6 +181,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, int i, length; unsigned long flags = 0; static uint8_t buf[512]; + char hdr[32]; /* hw.copy_from_card expects IRQ context so take the IRQ lock to keep it single threaded */ @@ -197,14 +195,10 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, /* if the offset[0] byte is nonzero, this is a 256-byte packet */ length = (buf[2] ? 256 : 512); - printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc); - for (i = 0; i < length; i++) { - if (i % 16 == 0) - printk("\n" KERN_DEBUG "[%04X] ", i); - printk("%02X ", buf[i]); - } - printk("\n"); - + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, buf, length, true); } #else diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 9578a3dfac0..206144f2470 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -428,10 +428,11 @@ bmac_init_phy(struct net_device *dev) printk(KERN_DEBUG "phy registers:"); for (addr = 0; addr < 32; ++addr) { if ((addr & 7) == 0) - printk("\n" KERN_DEBUG); - printk(" %.4x", bmac_mif_read(dev, addr)); + printk(KERN_DEBUG); + printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr)); } - printk("\n"); + printk(KERN_CONT "\n"); + if (bp->is_bmac_plus) { unsigned int capable, ctrl; diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 6c67be67976..c36a5f33739 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -484,8 +484,9 @@ static void bnx2x_fw_dump(struct bnx2x *bp) mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); mark = ((mark + 0x3) & ~0x3); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark); + printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + printk(KERN_ERR PFX); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + @@ -500,7 +501,7 @@ static void bnx2x_fw_dump(struct bnx2x *bp) data[8] = 0x0; printk(KERN_CONT "%s", (char *)data); } - printk("\n" KERN_ERR PFX "end of fw dump\n"); + printk(KERN_ERR PFX "end of fw dump\n"); } static void bnx2x_panic_dump(struct bnx2x *bp) @@ -7354,7 +7355,7 @@ static void bnx2x_reset_task(struct work_struct *work) #ifdef BNX2X_STOP_ON_ERROR BNX2X_ERR("reset task called but STOP_ON_ERROR defined" " so reset not done to allow debug dump,\n" - KERN_ERR " you will need to reboot when done\n"); + " you will need to reboot when done\n"); return; #endif diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 895d72143ee..4b6a219fece 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -268,8 +268,9 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_INFO "tx_coalesce:\t%d packets\n", tx_coalesce); if (np->coalesce) - printk(KERN_INFO "rx_coalesce:\t%d packets\n" - KERN_INFO "rx_timeout: \t%d ns\n", + printk(KERN_INFO + "rx_coalesce:\t%d packets\n" + "rx_timeout: \t%d ns\n", np->rx_coalesce, np->rx_timeout*640); if (np->vlan) printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); @@ -1522,9 +1523,9 @@ mii_get_media (struct net_device *dev) printk (KERN_INFO "Operating at 10 Mbps, "); } if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } } if (np->tx_flow) @@ -1614,9 +1615,9 @@ mii_set_media (struct net_device *dev) } if (np->full_duplex) { bmcr |= MII_BMCR_DUPLEX_MODE; - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } #if 0 /* Set 1000BaseT Master/Slave setting */ @@ -1669,9 +1670,9 @@ mii_get_media_pcs (struct net_device *dev) __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); printk (KERN_INFO "Operating at 1000 Mbps, "); if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } } if (np->tx_flow) diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index b60e27dfcfa..88d7ebf3122 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -338,8 +338,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, #ifndef MODULE static int printed_version; if (!printed_version++) - printk (KERN_INFO "%s" KERN_INFO "%s", - version, version2); + printk(KERN_INFO "%s%s", version, version2); #endif card_idx++; @@ -1600,7 +1599,7 @@ static int __init epic_init (void) { /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE - printk (KERN_INFO "%s" KERN_INFO "%s", + printk (KERN_INFO "%s%s", version, version2); #endif diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 891be28a7d4..48385c42ab5 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -1209,17 +1209,20 @@ static void fealnx_tx_timeout(struct net_device *dev) unsigned long flags; int i; - printk(KERN_WARNING "%s: Transmit timed out, status %8.8x," - " resetting...\n", dev->name, ioread32(ioaddr + ISR)); + printk(KERN_WARNING + "%s: Transmit timed out, status %8.8x, resetting...\n", + dev->name, ioread32(ioaddr + ISR)); { printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int) np->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring); + printk(KERN_CONT " %8.8x", + (unsigned int) np->rx_ring[i].status); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", np->tx_ring[i].status); - printk("\n"); + printk(KERN_CONT " %4.4x", np->tx_ring[i].status); + printk(KERN_CONT "\n"); } spin_lock_irqsave(&np->lock, flags); diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 9d5b62cb30f..d62378cbc14 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -173,8 +173,8 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static const char version[] __devinitconst = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n" -KERN_INFO " Some modifications by Eric kasten <kasten@nscl.msu.edu>\n" -KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n"; +" Some modifications by Eric kasten <kasten@nscl.msu.edu>\n" +" Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n"; /* IP_MF appears to be only defined in <netinet/ip.h>, however, @@ -1080,11 +1080,14 @@ static void hamachi_tx_timeout(struct net_device *dev) { printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length)); - printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); + printk(KERN_CONT " %8.8x", + le32_to_cpu(hmp->rx_ring[i].status_n_length)); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length)); - printk("\n"); + printk(KERN_CONT " %4.4x", + le32_to_cpu(hmp->tx_ring[i].status_n_length)); + printk(KERN_CONT "\n"); } /* Reinit the hardware and make sure the Rx and Tx processes @@ -1753,13 +1756,13 @@ static int hamachi_close(struct net_device *dev) #ifdef __i386__ if (hamachi_debug > 2) { - printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + printk(KERN_DEBUG " Tx ring at %8.8x:\n", (int)hmp->tx_ring_dma); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %c #%d desc. %8.8x %8.8x.\n", + printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n", readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ', i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)hmp->rx_ring_dma); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n", @@ -1770,7 +1773,7 @@ static int hamachi_close(struct net_device *dev) u16 *addr = (u16 *) hmp->rx_skbuff[i]->data; int j; - + printk(KERN_DEBUG "Addr: "); for (j = 0; j < 0x50; j++) printk(" %4.4x", addr[j]); printk("\n"); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 5e4b7afd068..352703255bb 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -68,7 +68,7 @@ static const char paranoia_str[] = KERN_ERR static const char bc_drvname[] = "baycom_epp"; static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index 2e6fc4dc74b..5f5af9a606f 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -102,7 +102,7 @@ static const char bc_drvname[] = "baycom_par"; static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index b6a816e60c0..aa4488e871b 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -91,7 +91,7 @@ static const char bc_drvname[] = "baycom_ser_fdx"; static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 3bcc57acbe6..88c59359602 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -79,7 +79,7 @@ static const char bc_drvname[] = "baycom_ser_hdx"; static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index c9bfe4eea18..78c088331f5 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -130,8 +130,8 @@ static int full_duplex[MAX_UNITS]; static const char version[] __devinitconst = KERN_INFO DRV_NAME " dp8381x driver, version " DRV_VERSION ", " DRV_RELDATE "\n" - KERN_INFO " originally by Donald Becker <becker@scyld.com>\n" - KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; + " originally by Donald Becker <becker@scyld.com>\n" + " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 5c3e242428f..992dbfffdb0 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -321,7 +321,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (ei_debug && version_printed++ == 0) - printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2); + printk(KERN_INFO "%s%s", version1, version2); printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 8c1f6988f39..89f7b2ad523 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -105,7 +105,7 @@ IVc. Errata static char version[] __devinitdata = KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n" -KERN_INFO " Support available from http://foo.com/bar/baz.html\n"; +" Support available from http://foo.com/bar/baz.html\n"; /* define to 1 to enable PIO instead of MMIO */ #undef USE_IO_OPS diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index f51944b28cf..06618af1a46 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -298,14 +298,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) strcpy(info->node.dev_name, dev->name); - printk(KERN_INFO "%s: port %#3lx, irq %d,", - dev->name, dev->base_addr, dev->irq); - printk (" mmio %#5lx,", (u_long)ti->mmio); - printk (" sram %#5lx,", (u_long)ti->sram_base << 12); - printk ("\n" KERN_INFO " hwaddr="); - for (i = 0; i < TR_ALEN; i++) - printk("%02X", dev->dev_addr[i]); - printk("\n"); + printk(KERN_INFO + "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", + dev->name, dev->base_addr, dev->irq, + (u_long)ti->mmio, (u_long)(ti->sram_base << 12), + dev->dev_addr); return 0; cs_failed: diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 02ef63ed1f9..36de91baf23 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1425,15 +1425,12 @@ static void BuildLAF(int *ladrf, int *adr) ladrf[byte] |= (1 << (hashcode & 7)); #ifdef PCMCIA_DEBUG - if (pc_debug > 2) { - printk(KERN_DEBUG " adr ="); - for (i = 0; i < 6; i++) - printk(" %02X", adr[i]); - printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]" - " =", hashcode); - for (i = 0; i < 8; i++) - printk(" %02X", ladrf[i]); - printk("\n"); + if (pc_debug > 2) + printk(KERN_DEBUG " adr =%pM\n", adr); + printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); + for (i = 0; i < 8; i++) + printk(KERN_CONT " %02X", ladrf[i]); + printk(KERN_CONT "\n"); } #endif } /* BuildLAF */ diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 1c35e1d637a..28368157dac 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -485,7 +485,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, &new_ring_dma_addr); if (new_tx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Consistent memory allocation failed.\n", dev->name); return; @@ -496,7 +496,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_dma_addr_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_tx_ring; } @@ -505,7 +505,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_skb_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_lists; } @@ -563,7 +563,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, &new_ring_dma_addr); if (new_rx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Consistent memory allocation failed.\n", dev->name); return; @@ -574,7 +574,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_dma_addr_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_rx_ring; } @@ -583,7 +583,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_skb_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_lists; } @@ -1766,38 +1766,38 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* Version 0x2623 and 0x2624 */ if (((chip_version + 1) & 0xfffe) == 0x2624) { i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */ - printk("\n" KERN_INFO " tx_start_pt(0x%04x):", i); + printk(KERN_INFO " tx_start_pt(0x%04x):", i); switch (i >> 10) { case 0: - printk(" 20 bytes,"); + printk(KERN_CONT " 20 bytes,"); break; case 1: - printk(" 64 bytes,"); + printk(KERN_CONT " 64 bytes,"); break; case 2: - printk(" 128 bytes,"); + printk(KERN_CONT " 128 bytes,"); break; case 3: - printk("~220 bytes,"); + printk(KERN_CONT "~220 bytes,"); break; } i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */ - printk(" BCR18(%x):", i & 0xffff); + printk(KERN_CONT " BCR18(%x):", i & 0xffff); if (i & (1 << 5)) - printk("BurstWrEn "); + printk(KERN_CONT "BurstWrEn "); if (i & (1 << 6)) - printk("BurstRdEn "); + printk(KERN_CONT "BurstRdEn "); if (i & (1 << 7)) - printk("DWordIO "); + printk(KERN_CONT "DWordIO "); if (i & (1 << 11)) - printk("NoUFlow "); + printk(KERN_CONT "NoUFlow "); i = a->read_bcr(ioaddr, 25); - printk("\n" KERN_INFO " SRAMSIZE=0x%04x,", i << 8); + printk(KERN_INFO " SRAMSIZE=0x%04x,", i << 8); i = a->read_bcr(ioaddr, 26); - printk(" SRAM_BND=0x%04x,", i << 8); + printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8); i = a->read_bcr(ioaddr, 27); if (i & (1 << 14)) - printk("LowLatRx"); + printk(KERN_CONT "LowLatRx"); } } @@ -1996,7 +1996,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) &lp->tx_ring_dma_addr); if (lp->tx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; @@ -2008,7 +2008,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) &lp->rx_ring_dma_addr); if (lp->rx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; @@ -2018,7 +2018,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->tx_dma_addr) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2027,7 +2027,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->rx_dma_addr) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2036,7 +2036,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->tx_skbuff) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2045,7 +2045,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->rx_skbuff) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 838cce8b8ff..669253c7bd4 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -180,7 +180,7 @@ static int full_duplex[MAX_UNITS] = {0, }; /* These identify the driver base version and may not be removed. */ static const char version[] __devinitconst = KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n" -KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; +" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 545f81b34ad..d1521c3875b 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -1698,13 +1698,13 @@ static int netdev_close(struct net_device *dev) #ifdef __i386__ if (netif_msg_hw(np)) { - printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + printk(KERN_DEBUG " Tx ring at %8.8x:\n", (int)(np->tx_ring_dma)); for (i = 0; i < TX_RING_SIZE; i++) - printk(" #%d desc. %4.4x %8.8x %8.8x.\n", + printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, np->tx_ring[i].frag[0].length); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)(np->rx_ring_dma)); for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 0f78f99f9b2..7030bd5e984 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1132,7 +1132,9 @@ static int tsi108_get_mac(struct net_device *dev) } if (!is_valid_ether_addr(dev->dev_addr)) { - printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2); + printk(KERN_ERR + "%s: Invalid MAC address. word1: %08x, word2: %08x\n", + dev->name, word1, word2); return -EINVAL; } @@ -1201,8 +1203,8 @@ static void tsi108_set_rx_mode(struct net_device *dev) __set_bit(hash, &data->mc_hash[0]); } else { printk(KERN_ERR - "%s: got multicast address of length %d " - "instead of 6.\n", dev->name, + "%s: got multicast address of length %d instead of 6.\n", + dev->name, mc->dmi_addrlen); } diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 81f054dbb88..ef49744a508 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -944,9 +944,10 @@ static void de_set_media (struct de_private *de) macmode &= ~FullDuplex; if (netif_msg_link(de)) { - printk(KERN_INFO "%s: set link %s\n" - KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" - KERN_INFO "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", + printk(KERN_INFO + "%s: set link %s\n" + "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" + "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", de->dev->name, media_name[media], de->dev->name, dr32(MacMode), dr32(SIAStatus), dr32(CSR13), dr32(CSR14), dr32(CSR15), diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 2abb5d3becc..99a63649f4f 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -570,16 +570,18 @@ static void tulip_tx_timeout(struct net_device *dev) (unsigned int)tp->rx_ring[i].buffer2, buf[0], buf[1], buf[2]); for (j = 0; buf[j] != 0xee && j < 1600; j++) - if (j < 100) printk(" %2.2x", buf[j]); - printk(" j=%d.\n", j); + if (j < 100) + printk(KERN_CONT " %2.2x", buf[j]); + printk(KERN_CONT " j=%d.\n", j); } printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); + printk(KERN_CONT " %8.8x", + (unsigned int)tp->rx_ring[i].status); + printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->tx_ring[i].status); - printk("\n"); + printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status); + printk(KERN_CONT "\n"); } #endif diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 842b1a2c40d..0f15773dae5 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -142,7 +142,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static const char version[] __initconst = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n" - KERN_INFO " http://www.scyld.com/network/drivers.html\n"; + " http://www.scyld.com/network/drivers.html\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); @@ -939,7 +939,7 @@ static void tx_timeout(struct net_device *dev) printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) printk(" %8.8x", (unsigned int)np->rx_ring[i].status); - printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring); + printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) printk(" %8.8x", np->tx_ring[i].status); printk("\n"); @@ -1520,7 +1520,7 @@ static int netdev_close(struct net_device *dev) printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n", i, np->tx_ring[i].length, np->tx_ring[i].status, np->tx_ring[i].buffer1); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c index 223238de475..1ea1ef6c3b9 100644 --- a/drivers/net/wan/hd64570.c +++ b/drivers/net/wan/hd64570.c @@ -584,8 +584,9 @@ static void sca_dump_rings(struct net_device *dev) sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in"); for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++) printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat))); + printk(KERN_CONT "\n"); - printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " + printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " "last=%u %sactive", sca_inw(get_dmac_tx(port) + CDAL, card), sca_inw(get_dmac_tx(port) + EDAL, card), diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c index 497b003d723..f099c34a3ae 100644 --- a/drivers/net/wan/hd64572.c +++ b/drivers/net/wan/hd64572.c @@ -529,8 +529,9 @@ static void sca_dump_rings(struct net_device *dev) sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in"); for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++) printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat))); + printk(KERN_CONT "\n"); - printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " + printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " "last=%u %sactive", sca_inl(get_dmac_tx(port) + CDAL, card), sca_inl(get_dmac_tx(port) + EDAL, card), diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 3fb9dbc88a1..d14e95a08d6 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -326,11 +326,9 @@ sbni_pci_probe( struct net_device *dev ) } if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs) - printk( KERN_WARNING " WARNING: The PCI BIOS assigned " - "this PCI card to IRQ %d, which is unlikely " - "to work!.\n" - KERN_WARNING " You should use the PCI BIOS " - "setup to assign a valid IRQ line.\n", + printk( KERN_WARNING + " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n" + " You should use the PCI BIOS setup to assign a valid IRQ line.\n", pci_irq_line ); /* avoiding re-enable dual adapters */ diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b10b0383dfa..698b11b1cad 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2427,11 +2427,10 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len) #ifdef PCMCIA_DEBUG if (pc_debug > 3) { - int i; - printk(KERN_DEBUG "skb->data before untranslate"); - for (i = 0; i < 64; i++) - printk("%02x ", skb->data[i]); - printk("\n" KERN_DEBUG + print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ", + DUMP_PREFIX_NONE, 16, 1, + skb->data, 64, true); + printk(KERN_DEBUG "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n", ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl, psnap->org[0], psnap->org[1], psnap->org[2]); diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 6af706408ac..c6d300666ad 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3556,17 +3556,8 @@ wv_82593_config(struct net_device * dev) cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */ #ifdef DEBUG_I82593_SHOW - { - u_char *c = (u_char *) &cfblk; - int i; - printk(KERN_DEBUG "wavelan_cs: config block:"); - for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++) - { - if((i % 16) == 0) printk("\n" KERN_DEBUG); - printk("%02x ", *c); - } - printk("\n"); - } + print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE, + 16, 1, &cfblk, sizeof(struct i82593_conf_block), false); #endif /* Copy the config block to the i82593 */ diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index 3c7a5053f1d..a07580138e8 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -109,7 +109,7 @@ static int gx_fix; /* These identify the driver base version and may not be removed. */ static const char version[] __devinitconst = KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n" - KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; + " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver"); @@ -700,12 +700,15 @@ static void yellowfin_tx_timeout(struct net_device *dev) int i; printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", yp->rx_ring[i].result_status); - printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring); + printk(KERN_CONT " %8.8x", + yp->rx_ring[i].result_status); + printk(KERN_CONT "\n"); + printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs, - yp->tx_ring[i].result_status); - printk("\n"); + printk(KERN_CONT " %4.4x /%8.8x", + yp->tx_status[i].tx_errs, + yp->tx_ring[i].result_status); + printk(KERN_CONT "\n"); } /* If the hardware is found to hang regularly, we will update the code @@ -1216,20 +1219,20 @@ static int yellowfin_close(struct net_device *dev) #if defined(__i386__) if (yellowfin_debug > 2) { - printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n", + printk(KERN_DEBUG" Tx ring at %8.8llx:\n", (unsigned long long)yp->tx_ring_dma); for (i = 0; i < TX_RING_SIZE*2; i++) - printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", + printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ', i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr, yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status); printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status); for (i = 0; i < TX_RING_SIZE; i++) - printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n", + printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n", i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs, yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused); - printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n", + printk(KERN_DEBUG " Rx ring %8.8llx:\n", (unsigned long long)yp->rx_ring_dma); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n", diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 5d610cbcfe8..0f0e0b919ef 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1134,7 +1134,7 @@ static const struct file_operations ccio_proc_bitmap_fops = { .llseek = seq_lseek, .release = single_release, }; -#endif +#endif /* CONFIG_PROC_FS */ /** * ccio_find_ioc - Find the ioc in the ioc_list @@ -1568,14 +1568,15 @@ static int __init ccio_probe(struct parisc_device *dev) /* if this fails, no I/O cards will work, so may as well bug */ BUG_ON(dev->dev.platform_data == NULL); HBA_DATA(dev->dev.platform_data)->iommu = ioc; - + +#ifdef CONFIG_PROC_FS if (ioc_count == 0) { proc_create(MODULE_NAME, 0, proc_runway_root, &ccio_proc_info_fops); proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root, &ccio_proc_bitmap_fops); } - +#endif ioc_count++; parisc_has_iommu(); diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 52ae0b1d470..c590974e981 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -353,7 +353,7 @@ static unsigned int dino_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type dino_interrupt_type = { +static struct irq_chip dino_interrupt_type = { .typename = "GSC-PCI", .startup = dino_startup_irq, .shutdown = dino_disable_irq, @@ -1019,22 +1019,22 @@ static int __init dino_probe(struct parisc_device *dev) ** It's not used to avoid chicken/egg problems ** with configuration accessor functions. */ - bus = pci_scan_bus_parented(&dev->dev, dino_current_bus, - &dino_cfg_ops, NULL); + dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev, + dino_current_bus, &dino_cfg_ops, NULL); + if(bus) { - pci_bus_add_devices(bus); /* This code *depends* on scanning being single threaded * if it isn't, this global bus number count will fail */ dino_current_bus = bus->subordinate + 1; pci_bus_assign_resources(bus); + pci_bus_add_devices(bus); } else { - printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", + printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n", dev_name(&dev->dev), dino_current_bus); /* increment the bus number in case of duplicates */ dino_current_bus++; } - dino_dev->hba.hba_bus = bus; return 0; } diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 5b89f404e66..51220749cb6 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -188,7 +188,7 @@ static unsigned int eisa_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type eisa_interrupt_type = { +static struct irq_chip eisa_interrupt_type = { .typename = "EISA", .startup = eisa_startup_irq, .shutdown = eisa_disable_irq, diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c index c709ecc2b7f..0be1d50645a 100644 --- a/drivers/parisc/eisa_enumerator.c +++ b/drivers/parisc/eisa_enumerator.c @@ -101,7 +101,7 @@ static int configure_memory(const unsigned char *buf, printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end); result = request_resource(mem_parent, res); if (result < 0) { - printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); + printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); return result; } } @@ -191,7 +191,7 @@ static int configure_port(const unsigned char *buf, struct resource *io_parent, printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end); result = request_resource(io_parent, res); if (result < 0) { - printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); + printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); return result; } } @@ -224,7 +224,7 @@ static int configure_port_init(const unsigned char *buf) case HPEE_PORT_INIT_WIDTH_BYTE: s=1; if (c & HPEE_PORT_INIT_MASK) { - printk("\n" KERN_WARNING "port_init: unverified mask attribute\n"); + printk(KERN_WARNING "port_init: unverified mask attribute\n"); outb((inb(get_16(buf+len+1) & get_8(buf+len+3)) | get_8(buf+len+4)), get_16(buf+len+1)); @@ -249,7 +249,7 @@ static int configure_port_init(const unsigned char *buf) case HPEE_PORT_INIT_WIDTH_DWORD: s=4; if (c & HPEE_PORT_INIT_MASK) { - printk("\n" KERN_WARNING "port_init: unverified mask attribute\n"); + printk(KERN_WARNING "port_init: unverified mask attribute\n"); outl((inl(get_16(buf+len+1) & get_32(buf+len+3)) | get_32(buf+len+7)), get_16(buf+len+1)); @@ -259,7 +259,7 @@ static int configure_port_init(const unsigned char *buf) break; default: - printk("\n" KERN_ERR "Invalid port init word %02x\n", c); + printk(KERN_ERR "Invalid port init word %02x\n", c); return 0; } @@ -297,7 +297,7 @@ static int configure_type_string(const unsigned char *buf) /* just skip past the type field */ len = get_8(buf); if (len > 80) { - printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); + printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); } return 1+len; @@ -398,7 +398,7 @@ static int parse_slot_config(int slot, } if (p0 + function_len < pos) { - printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match " + printk(KERN_ERR "eisa_enumerator: function %d length mis-match " "got %d, expected %d\n", num_func, pos-p0, function_len); res=-1; diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index d3363291769..647adc9f85a 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -148,7 +148,7 @@ static unsigned int gsc_asic_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type gsc_asic_interrupt_type = { +static struct irq_chip gsc_asic_interrupt_type = { .typename = "GSC-ASIC", .startup = gsc_asic_startup_irq, .shutdown = gsc_asic_disable_irq, @@ -158,7 +158,7 @@ static struct hw_interrupt_type gsc_asic_interrupt_type = { .end = no_end_irq, }; -int gsc_assign_irq(struct hw_interrupt_type *type, void *data) +int gsc_assign_irq(struct irq_chip *type, void *data) { static int irq = GSC_IRQ_BASE; struct irq_desc *desc; diff --git a/drivers/parisc/gsc.h b/drivers/parisc/gsc.h index 762a1babad6..b9d7bfb68e2 100644 --- a/drivers/parisc/gsc.h +++ b/drivers/parisc/gsc.h @@ -38,7 +38,7 @@ struct gsc_asic { int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic); int gsc_alloc_irq(struct gsc_irq *dev); /* dev needs an irq */ int gsc_claim_irq(struct gsc_irq *dev, int irq); /* dev needs this irq */ -int gsc_assign_irq(struct hw_interrupt_type *type, void *data); +int gsc_assign_irq(struct irq_chip *type, void *data); int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit); void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, void (*choose)(struct parisc_device *child, void *ctrl)); diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 4a9cc92d4d1..88e33355321 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -729,7 +729,7 @@ static int iosapic_set_affinity_irq(unsigned int irq, } #endif -static struct hw_interrupt_type iosapic_interrupt_type = { +static struct irq_chip iosapic_interrupt_type = { .typename = "IO-SAPIC-level", .startup = iosapic_startup_irq, .shutdown = iosapic_disable_irq, diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 59fbbf12836..ede614616f8 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -980,28 +980,38 @@ static void lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) { unsigned long bytecnt; - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; /* PA_VIEW */ - pdc_pat_cell_mod_maddr_block_t io_pdc_cell; /* IO_VIEW */ long io_count; long status; /* PDC return status */ long pa_count; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */ + pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */ int i; + pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL); + if (!pa_pdc_cell) + return; + + io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL); + if (!pa_pdc_cell) { + kfree(pa_pdc_cell); + return; + } + /* return cell module (IO view) */ status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, - PA_VIEW, & pa_pdc_cell); - pa_count = pa_pdc_cell.mod[1]; + PA_VIEW, pa_pdc_cell); + pa_count = pa_pdc_cell->mod[1]; status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, - IO_VIEW, &io_pdc_cell); - io_count = io_pdc_cell.mod[1]; + IO_VIEW, io_pdc_cell); + io_count = io_pdc_cell->mod[1]; /* We've already done this once for device discovery...*/ if (status != PDC_OK) { panic("pdc_pat_cell_module() call failed for LBA!\n"); } - if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) { + if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) { panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n"); } @@ -1016,8 +1026,8 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) } *p, *io; struct resource *r; - p = (void *) &(pa_pdc_cell.mod[2+i*3]); - io = (void *) &(io_pdc_cell.mod[2+i*3]); + p = (void *) &(pa_pdc_cell->mod[2+i*3]); + io = (void *) &(io_pdc_cell->mod[2+i*3]); /* Convert the PAT range data to PCI "struct resource" */ switch(p->type & 0xff) { @@ -1096,6 +1106,9 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) break; } } + + kfree(pa_pdc_cell); + kfree(io_pdc_cell); } #else /* keep compiler from complaining about missing declarations */ @@ -1509,10 +1522,6 @@ lba_driver_probe(struct parisc_device *dev) lba_bus = lba_dev->hba.hba_bus = pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start, cfg_ops, NULL); - if (lba_bus) { - lba_next_bus = lba_bus->subordinate + 1; - pci_bus_add_devices(lba_bus); - } /* This is in lieu of calling pci_assign_unassigned_resources() */ if (is_pdc_pat()) { @@ -1533,7 +1542,6 @@ lba_driver_probe(struct parisc_device *dev) } pci_enable_bridges(lba_bus); - /* ** Once PCI register ops has walked the bus, access to config ** space is restricted. Avoids master aborts on config cycles. @@ -1543,6 +1551,11 @@ lba_driver_probe(struct parisc_device *dev) lba_dev->flags |= LBA_FLAG_SKIP_PROBE; } + if (lba_bus) { + lba_next_bus = lba_bus->subordinate + 1; + pci_bus_add_devices(lba_bus); + } + /* Whew! Finally done! Tell services we got this one covered. */ return 0; } diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index d46dd57450a..123d8fe3427 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -2057,6 +2057,7 @@ void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r) r->start = (base & ~1UL) | PCI_F_EXTEND; size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK); r->end = r->start + size; + r->flags = IORESOURCE_MEM; } } @@ -2093,4 +2094,5 @@ void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r ) size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC; r->start += rope * (size + 1); /* adjust base for this rope */ r->end = r->start + size; + r->flags = IORESOURCE_MEM; } diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index 33e5ade774c..675f04e6597 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -325,7 +325,7 @@ static unsigned int superio_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type superio_interrupt_type = { +static struct irq_chip superio_interrupt_type = { .typename = SUPERIO, .startup = superio_startup_irq, .shutdown = superio_disable_irq, @@ -434,8 +434,8 @@ static void __init superio_parport_init(void) 0 /*base_hi*/, PAR_IRQ, PARPORT_DMA_NONE /* dma */, - NULL /*struct pci_dev* */), - 0 /* shared irq flags */ ) + NULL /*struct pci_dev* */, + 0 /* shared irq flags */)) printk(KERN_WARNING PFX "Probing parallel port failed.\n"); #endif /* CONFIG_PARPORT_PC */ diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 1032d5fdbd4..2597145a066 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2907,6 +2907,7 @@ enum parport_pc_pci_cards { netmos_9755, netmos_9805, netmos_9815, + netmos_9901, quatech_sppxp100, }; @@ -2987,7 +2988,7 @@ static struct parport_pc_pci { /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, - + /* netmos_9901 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -3089,6 +3090,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x2000, 0, 0, netmos_9901 }, /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 844580489d4..5c5043f239c 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -555,6 +555,8 @@ static struct hotplug_slot *get_slot_from_name (const char *name) * @slot: pointer to the &struct hotplug_slot to register * @devnr: device number * @name: name registered with kobject core + * @owner: caller module owner + * @mod_name: caller module name * * Registers a hotplug slot with the pci hotplug subsystem, which will allow * userspace interaction to the slot. diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index e53eacd75c8..ebc9b8dca88 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -39,7 +39,6 @@ #include <linux/sysdev.h> #include <asm/cacheflush.h> #include <asm/iommu.h> -#include <asm/e820.h> #include "pci.h" #define ROOT_SIZE VTD_PAGE_SIZE @@ -57,14 +56,32 @@ #define MAX_AGAW_WIDTH 64 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1) +#define DOMAIN_MAX_PFN(gaw) ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1) #define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT) #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) #define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64)) -#ifndef PHYSICAL_PAGE_MASK -#define PHYSICAL_PAGE_MASK PAGE_MASK -#endif + +/* VT-d pages must always be _smaller_ than MM pages. Otherwise things + are never going to work. */ +static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn) +{ + return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT); +} + +static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn) +{ + return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT); +} +static inline unsigned long page_to_dma_pfn(struct page *pg) +{ + return mm_to_dma_pfn(page_to_pfn(pg)); +} +static inline unsigned long virt_to_dma_pfn(void *p) +{ + return page_to_dma_pfn(virt_to_page(p)); +} /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; @@ -205,12 +222,17 @@ static inline void dma_set_pte_prot(struct dma_pte *pte, unsigned long prot) static inline u64 dma_pte_addr(struct dma_pte *pte) { - return (pte->val & VTD_PAGE_MASK); +#ifdef CONFIG_64BIT + return pte->val & VTD_PAGE_MASK; +#else + /* Must have a full atomic 64-bit read */ + return __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK; +#endif } -static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr) +static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn) { - pte->val |= (addr & VTD_PAGE_MASK); + pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT; } static inline bool dma_pte_present(struct dma_pte *pte) @@ -218,6 +240,11 @@ static inline bool dma_pte_present(struct dma_pte *pte) return (pte->val & 3) != 0; } +static inline int first_pte_in_page(struct dma_pte *pte) +{ + return !((unsigned long)pte & ~VTD_PAGE_MASK); +} + /* * This domain is a statically identity mapping domain. * 1. This domain creats a static 1:1 mapping to all usable memory. @@ -245,7 +272,6 @@ struct dmar_domain { struct iova_domain iovad; /* iova's that belong to this domain */ struct dma_pte *pgd; /* virtual address */ - spinlock_t mapping_lock; /* page table lock */ int gaw; /* max guest address width */ /* adjusted guest address width, 0 is level 2 30-bit */ @@ -649,80 +675,78 @@ static inline int width_to_agaw(int width) static inline unsigned int level_to_offset_bits(int level) { - return (12 + (level - 1) * LEVEL_STRIDE); + return (level - 1) * LEVEL_STRIDE; } -static inline int address_level_offset(u64 addr, int level) +static inline int pfn_level_offset(unsigned long pfn, int level) { - return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK); + return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK; } -static inline u64 level_mask(int level) +static inline unsigned long level_mask(int level) { - return ((u64)-1 << level_to_offset_bits(level)); + return -1UL << level_to_offset_bits(level); } -static inline u64 level_size(int level) +static inline unsigned long level_size(int level) { - return ((u64)1 << level_to_offset_bits(level)); + return 1UL << level_to_offset_bits(level); } -static inline u64 align_to_level(u64 addr, int level) +static inline unsigned long align_to_level(unsigned long pfn, int level) { - return ((addr + level_size(level) - 1) & level_mask(level)); + return (pfn + level_size(level) - 1) & level_mask(level); } -static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) +static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, + unsigned long pfn) { - int addr_width = agaw_to_width(domain->agaw); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; struct dma_pte *parent, *pte = NULL; int level = agaw_to_level(domain->agaw); int offset; - unsigned long flags; BUG_ON(!domain->pgd); - - addr &= (((u64)1) << addr_width) - 1; + BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width); parent = domain->pgd; - spin_lock_irqsave(&domain->mapping_lock, flags); while (level > 0) { void *tmp_page; - offset = address_level_offset(addr, level); + offset = pfn_level_offset(pfn, level); pte = &parent[offset]; if (level == 1) break; if (!dma_pte_present(pte)) { + uint64_t pteval; + tmp_page = alloc_pgtable_page(); - if (!tmp_page) { - spin_unlock_irqrestore(&domain->mapping_lock, - flags); + if (!tmp_page) return NULL; + + domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE); + pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE; + if (cmpxchg64(&pte->val, 0ULL, pteval)) { + /* Someone else set it while we were thinking; use theirs. */ + free_pgtable_page(tmp_page); + } else { + dma_pte_addr(pte); + domain_flush_cache(domain, pte, sizeof(*pte)); } - domain_flush_cache(domain, tmp_page, PAGE_SIZE); - dma_set_pte_addr(pte, virt_to_phys(tmp_page)); - /* - * high level table always sets r/w, last level page - * table control read/write - */ - dma_set_pte_readable(pte); - dma_set_pte_writable(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); } parent = phys_to_virt(dma_pte_addr(pte)); level--; } - spin_unlock_irqrestore(&domain->mapping_lock, flags); return pte; } /* return address's pte at specific level */ -static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, - int level) +static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, + unsigned long pfn, + int level) { struct dma_pte *parent, *pte = NULL; int total = agaw_to_level(domain->agaw); @@ -730,7 +754,7 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, parent = domain->pgd; while (level <= total) { - offset = address_level_offset(addr, total); + offset = pfn_level_offset(pfn, total); pte = &parent[offset]; if (level == total) return pte; @@ -743,74 +767,82 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, return NULL; } -/* clear one page's page table */ -static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr) -{ - struct dma_pte *pte = NULL; - - /* get last level pte */ - pte = dma_addr_level_pte(domain, addr, 1); - - if (pte) { - dma_clear_pte(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); - } -} - /* clear last level pte, a tlb flush should be followed */ -static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) +static void dma_pte_clear_range(struct dmar_domain *domain, + unsigned long start_pfn, + unsigned long last_pfn) { - int addr_width = agaw_to_width(domain->agaw); - int npages; + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + struct dma_pte *first_pte, *pte; - start &= (((u64)1) << addr_width) - 1; - end &= (((u64)1) << addr_width) - 1; - /* in case it's partial page */ - start &= PAGE_MASK; - end = PAGE_ALIGN(end); - npages = (end - start) / VTD_PAGE_SIZE; + BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); - /* we don't need lock here, nobody else touches the iova range */ - while (npages--) { - dma_pte_clear_one(domain, start); - start += VTD_PAGE_SIZE; + /* we don't need lock here; nobody else touches the iova range */ + while (start_pfn <= last_pfn) { + first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1); + if (!pte) { + start_pfn = align_to_level(start_pfn + 1, 2); + continue; + } + do { + dma_clear_pte(pte); + start_pfn++; + pte++; + } while (start_pfn <= last_pfn && !first_pte_in_page(pte)); + + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); } } /* free page table pages. last level pte should already be cleared */ static void dma_pte_free_pagetable(struct dmar_domain *domain, - u64 start, u64 end) + unsigned long start_pfn, + unsigned long last_pfn) { - int addr_width = agaw_to_width(domain->agaw); - struct dma_pte *pte; + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + struct dma_pte *first_pte, *pte; int total = agaw_to_level(domain->agaw); int level; - u64 tmp; + unsigned long tmp; - start &= (((u64)1) << addr_width) - 1; - end &= (((u64)1) << addr_width) - 1; + BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); - /* we don't need lock here, nobody else touches the iova range */ + /* We don't need lock here; nobody else touches the iova range */ level = 2; while (level <= total) { - tmp = align_to_level(start, level); - if (tmp >= end || (tmp + level_size(level) > end)) + tmp = align_to_level(start_pfn, level); + + /* If we can't even clear one PTE at this level, we're done */ + if (tmp + level_size(level) - 1 > last_pfn) return; - while (tmp < end) { - pte = dma_addr_level_pte(domain, tmp, level); - if (pte) { - free_pgtable_page( - phys_to_virt(dma_pte_addr(pte))); - dma_clear_pte(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); + while (tmp + level_size(level) - 1 <= last_pfn) { + first_pte = pte = dma_pfn_level_pte(domain, tmp, level); + if (!pte) { + tmp = align_to_level(tmp + 1, level + 1); + continue; } - tmp += level_size(level); + do { + if (dma_pte_present(pte)) { + free_pgtable_page(phys_to_virt(dma_pte_addr(pte))); + dma_clear_pte(pte); + } + pte++; + tmp += level_size(level); + } while (!first_pte_in_page(pte) && + tmp + level_size(level) - 1 <= last_pfn); + + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + } level++; } /* free pgd */ - if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) { + if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) { free_pgtable_page(domain->pgd); domain->pgd = NULL; } @@ -1036,11 +1068,11 @@ static void iommu_flush_dev_iotlb(struct dmar_domain *domain, } static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, - u64 addr, unsigned int pages) + unsigned long pfn, unsigned int pages) { unsigned int mask = ilog2(__roundup_pow_of_two(pages)); + uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT; - BUG_ON(addr & (~VTD_PAGE_MASK)); BUG_ON(pages == 0); /* @@ -1055,7 +1087,12 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, else iommu->flush.flush_iotlb(iommu, did, addr, mask, DMA_TLB_PSI_FLUSH); - if (did) + + /* + * In caching mode, domain ID 0 is reserved for non-present to present + * mapping flush. Device IOTLB doesn't need to be flushed in this case. + */ + if (!cap_caching_mode(iommu->cap) || did) iommu_flush_dev_iotlb(iommu->domains[did], addr, mask); } @@ -1280,7 +1317,6 @@ static void dmar_init_reserved_ranges(void) struct pci_dev *pdev = NULL; struct iova *iova; int i; - u64 addr, size; init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN); @@ -1303,12 +1339,9 @@ static void dmar_init_reserved_ranges(void) r = &pdev->resource[i]; if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; - addr = r->start; - addr &= PHYSICAL_PAGE_MASK; - size = r->end - addr; - size = PAGE_ALIGN(size); - iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), - IOVA_PFN(size + addr) - 1); + iova = reserve_iova(&reserved_iova_list, + IOVA_PFN(r->start), + IOVA_PFN(r->end)); if (!iova) printk(KERN_ERR "Reserve iova failed\n"); } @@ -1342,7 +1375,6 @@ static int domain_init(struct dmar_domain *domain, int guest_width) unsigned long sagaw; init_iova_domain(&domain->iovad, DMA_32BIT_PFN); - spin_lock_init(&domain->mapping_lock); spin_lock_init(&domain->iommu_lock); domain_reserve_special_ranges(domain); @@ -1389,7 +1421,6 @@ static void domain_exit(struct dmar_domain *domain) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; - u64 end; /* Domain 0 is reserved, so dont process it */ if (!domain) @@ -1398,14 +1429,12 @@ static void domain_exit(struct dmar_domain *domain) domain_remove_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); - end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK); /* clear ptes */ - dma_pte_clear_range(domain, 0, end); + dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ - dma_pte_free_pagetable(domain, 0, end); + dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); for_each_active_iommu(iommu, drhd) if (test_bit(iommu->seq_id, &domain->iommu_bmp)) @@ -1619,42 +1648,86 @@ static int domain_context_mapped(struct pci_dev *pdev) tmp->devfn); } -static int -domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, - u64 hpa, size_t size, int prot) +static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long phys_pfn, + unsigned long nr_pages, int prot) { - u64 start_pfn, end_pfn; - struct dma_pte *pte; - int index; - int addr_width = agaw_to_width(domain->agaw); + struct dma_pte *first_pte = NULL, *pte = NULL; + phys_addr_t uninitialized_var(pteval); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + unsigned long sg_res; - hpa &= (((u64)1) << addr_width) - 1; + BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; - iova &= PAGE_MASK; - start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT; - end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT; - index = 0; - while (start_pfn < end_pfn) { - pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index); - if (!pte) - return -ENOMEM; + + prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP; + + if (sg) + sg_res = 0; + else { + sg_res = nr_pages + 1; + pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot; + } + + while (nr_pages--) { + uint64_t tmp; + + if (!sg_res) { + sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT; + sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset; + sg->dma_length = sg->length; + pteval = page_to_phys(sg_page(sg)) | prot; + } + if (!pte) { + first_pte = pte = pfn_to_dma_pte(domain, iov_pfn); + if (!pte) + return -ENOMEM; + } /* We don't need lock here, nobody else * touches the iova range */ - BUG_ON(dma_pte_addr(pte)); - dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT); - dma_set_pte_prot(pte, prot); - if (prot & DMA_PTE_SNP) - dma_set_pte_snp(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); - start_pfn++; - index++; + tmp = cmpxchg64_local(&pte->val, 0ULL, pteval); + if (tmp) { + static int dumps = 5; + printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n", + iov_pfn, tmp, (unsigned long long)pteval); + if (dumps) { + dumps--; + debug_dma_dump_mappings(NULL); + } + WARN_ON(1); + } + pte++; + if (!nr_pages || first_pte_in_page(pte)) { + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + pte = NULL; + } + iov_pfn++; + pteval += VTD_PAGE_SIZE; + sg_res--; + if (!sg_res) + sg = sg_next(sg); } return 0; } +static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long nr_pages, + int prot) +{ + return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot); +} + +static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + unsigned long phys_pfn, unsigned long nr_pages, + int prot) +{ + return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot); +} + static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn) { if (!iommu) @@ -1845,58 +1918,61 @@ error: static int iommu_identity_mapping; +static int iommu_domain_identity_map(struct dmar_domain *domain, + unsigned long long start, + unsigned long long end) +{ + unsigned long first_vpfn = start >> VTD_PAGE_SHIFT; + unsigned long last_vpfn = end >> VTD_PAGE_SHIFT; + + if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn), + dma_to_mm_pfn(last_vpfn))) { + printk(KERN_ERR "IOMMU: reserve iova failed\n"); + return -ENOMEM; + } + + pr_debug("Mapping reserved region %llx-%llx for domain %d\n", + start, end, domain->id); + /* + * RMRR range might have overlap with physical memory range, + * clear it first + */ + dma_pte_clear_range(domain, first_vpfn, last_vpfn); + + return domain_pfn_mapping(domain, first_vpfn, first_vpfn, + last_vpfn - first_vpfn + 1, + DMA_PTE_READ|DMA_PTE_WRITE); +} + static int iommu_prepare_identity_map(struct pci_dev *pdev, unsigned long long start, unsigned long long end) { struct dmar_domain *domain; - unsigned long size; - unsigned long long base; int ret; printk(KERN_INFO - "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", - pci_name(pdev), start, end); - if (iommu_identity_mapping) - domain = si_domain; - else - /* page table init */ - domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); + "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", + pci_name(pdev), start, end); + + domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); if (!domain) return -ENOMEM; - /* The address might not be aligned */ - base = start & PAGE_MASK; - size = end - base; - size = PAGE_ALIGN(size); - if (!reserve_iova(&domain->iovad, IOVA_PFN(base), - IOVA_PFN(base + size) - 1)) { - printk(KERN_ERR "IOMMU: reserve iova failed\n"); - ret = -ENOMEM; - goto error; - } - - pr_debug("Mapping reserved region %lx@%llx for %s\n", - size, base, pci_name(pdev)); - /* - * RMRR range might have overlap with physical memory range, - * clear it first - */ - dma_pte_clear_range(domain, base, base + size); - - ret = domain_page_mapping(domain, base, base, size, - DMA_PTE_READ|DMA_PTE_WRITE); + ret = iommu_domain_identity_map(domain, start, end); if (ret) goto error; /* context entry init */ ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL); - if (!ret) - return 0; -error: + if (ret) + goto error; + + return 0; + + error: domain_exit(domain); return ret; - } static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, @@ -1908,64 +1984,6 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, rmrr->end_address + 1); } -#ifdef CONFIG_DMAR_GFX_WA -struct iommu_prepare_data { - struct pci_dev *pdev; - int ret; -}; - -static int __init iommu_prepare_work_fn(unsigned long start_pfn, - unsigned long end_pfn, void *datax) -{ - struct iommu_prepare_data *data; - - data = (struct iommu_prepare_data *)datax; - - data->ret = iommu_prepare_identity_map(data->pdev, - start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); - return data->ret; - -} - -static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev) -{ - int nid; - struct iommu_prepare_data data; - - data.pdev = pdev; - data.ret = 0; - - for_each_online_node(nid) { - work_with_active_regions(nid, iommu_prepare_work_fn, &data); - if (data.ret) - return data.ret; - } - return data.ret; -} - -static void __init iommu_prepare_gfx_mapping(void) -{ - struct pci_dev *pdev = NULL; - int ret; - - for_each_pci_dev(pdev) { - if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO || - !IS_GFX_DEVICE(pdev)) - continue; - printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n", - pci_name(pdev)); - ret = iommu_prepare_with_active_regions(pdev); - if (ret) - printk(KERN_ERR "IOMMU: mapping reserved region failed\n"); - } -} -#else /* !CONFIG_DMAR_GFX_WA */ -static inline void iommu_prepare_gfx_mapping(void) -{ - return; -} -#endif - #ifdef CONFIG_DMAR_FLOPPY_WA static inline void iommu_prepare_isa(void) { @@ -1976,12 +1994,12 @@ static inline void iommu_prepare_isa(void) if (!pdev) return; - printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n"); + printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n"); ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024); if (ret) - printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, " - "floppy might not work\n"); + printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; " + "floppy might not work\n"); } #else @@ -2009,16 +2027,30 @@ static int __init init_context_pass_through(void) } static int md_domain_init(struct dmar_domain *domain, int guest_width); + +static int __init si_domain_work_fn(unsigned long start_pfn, + unsigned long end_pfn, void *datax) +{ + int *ret = datax; + + *ret = iommu_domain_identity_map(si_domain, + (uint64_t)start_pfn << PAGE_SHIFT, + (uint64_t)end_pfn << PAGE_SHIFT); + return *ret; + +} + static int si_domain_init(void) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; - int ret = 0; + int nid, ret = 0; si_domain = alloc_domain(); if (!si_domain) return -EFAULT; + pr_debug("Identity mapping domain is domain %d\n", si_domain->id); for_each_active_iommu(iommu, drhd) { ret = iommu_attach_domain(si_domain, iommu); @@ -2035,6 +2067,12 @@ static int si_domain_init(void) si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY; + for_each_online_node(nid) { + work_with_active_regions(nid, si_domain_work_fn, &ret); + if (ret) + return ret; + } + return 0; } @@ -2079,9 +2117,49 @@ static int domain_add_dev_info(struct dmar_domain *domain, return 0; } +static int iommu_should_identity_map(struct pci_dev *pdev, int startup) +{ + if (iommu_identity_mapping == 2) + return IS_GFX_DEVICE(pdev); + + /* + * We want to start off with all devices in the 1:1 domain, and + * take them out later if we find they can't access all of memory. + * + * However, we can't do this for PCI devices behind bridges, + * because all PCI devices behind the same bridge will end up + * with the same source-id on their transactions. + * + * Practically speaking, we can't change things around for these + * devices at run-time, because we can't be sure there'll be no + * DMA transactions in flight for any of their siblings. + * + * So PCI devices (unless they're on the root bus) as well as + * their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of + * the 1:1 domain, just in _case_ one of their siblings turns out + * not to be able to map all of memory. + */ + if (!pdev->is_pcie) { + if (!pci_is_root_bus(pdev->bus)) + return 0; + if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI) + return 0; + } else if (pdev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) + return 0; + + /* + * At boot time, we don't yet know if devices will be 64-bit capable. + * Assume that they will -- if they turn out not to be, then we can + * take them out of the 1:1 domain later. + */ + if (!startup) + return pdev->dma_mask > DMA_BIT_MASK(32); + + return 1; +} + static int iommu_prepare_static_identity_mapping(void) { - int i; struct pci_dev *pdev = NULL; int ret; @@ -2089,23 +2167,19 @@ static int iommu_prepare_static_identity_mapping(void) if (ret) return -EFAULT; - printk(KERN_INFO "IOMMU: Setting identity map:\n"); for_each_pci_dev(pdev) { - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (ei->type == E820_RAM) { - ret = iommu_prepare_identity_map(pdev, - ei->addr, ei->addr + ei->size); - if (ret) { - printk(KERN_INFO "1:1 mapping to one domain failed.\n"); - return -EFAULT; - } - } + if (iommu_should_identity_map(pdev, 1)) { + printk(KERN_INFO "IOMMU: identity mapping for device %s\n", + pci_name(pdev)); + + ret = domain_context_mapping(si_domain, pdev, + CONTEXT_TT_MULTI_LEVEL); + if (ret) + return ret; + ret = domain_add_dev_info(si_domain, pdev); + if (ret) + return ret; } - ret = domain_add_dev_info(si_domain, pdev); - if (ret) - return ret; } return 0; @@ -2260,6 +2334,10 @@ int __init init_dmars(void) * identity mapping if iommu_identity_mapping is set. */ if (!iommu_pass_through) { +#ifdef CONFIG_DMAR_BROKEN_GFX_WA + if (!iommu_identity_mapping) + iommu_identity_mapping = 2; +#endif if (iommu_identity_mapping) iommu_prepare_static_identity_mapping(); /* @@ -2293,8 +2371,6 @@ int __init init_dmars(void) } } - iommu_prepare_gfx_mapping(); - iommu_prepare_isa(); } @@ -2339,50 +2415,40 @@ error: return ret; } -static inline u64 aligned_size(u64 host_addr, size_t size) +/* Returns a number of VTD pages, but aligned to MM page size */ +static inline unsigned long aligned_nrpages(unsigned long host_addr, + size_t size) { - u64 addr; - addr = (host_addr & (~PAGE_MASK)) + size; - return PAGE_ALIGN(addr); -} - -struct iova * -iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end) -{ - struct iova *piova; - - /* Make sure it's in range */ - end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end); - if (!size || (IOVA_START_ADDR + size > end)) - return NULL; - - piova = alloc_iova(&domain->iovad, - size >> PAGE_SHIFT, IOVA_PFN(end), 1); - return piova; + host_addr &= ~PAGE_MASK; + return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT; } -static struct iova * -__intel_alloc_iova(struct device *dev, struct dmar_domain *domain, - size_t size, u64 dma_mask) +/* This takes a number of _MM_ pages, not VTD pages */ +static struct iova *intel_alloc_iova(struct device *dev, + struct dmar_domain *domain, + unsigned long nrpages, uint64_t dma_mask) { struct pci_dev *pdev = to_pci_dev(dev); struct iova *iova = NULL; - if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac) - iova = iommu_alloc_iova(domain, size, dma_mask); - else { + /* Restrict dma_mask to the width that the iommu can handle */ + dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask); + + if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) { /* * First try to allocate an io virtual address in * DMA_BIT_MASK(32) and if that fails then try allocating * from higher range */ - iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32)); - if (!iova) - iova = iommu_alloc_iova(domain, size, dma_mask); - } - - if (!iova) { - printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev)); + iova = alloc_iova(&domain->iovad, nrpages, + IOVA_PFN(DMA_BIT_MASK(32)), 1); + if (iova) + return iova; + } + iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1); + if (unlikely(!iova)) { + printk(KERN_ERR "Allocating %ld-page iova for %s failed", + nrpages, pci_name(pdev)); return NULL; } @@ -2424,16 +2490,24 @@ static int iommu_dummy(struct pci_dev *pdev) } /* Check if the pdev needs to go through non-identity map and unmap process.*/ -static int iommu_no_mapping(struct pci_dev *pdev) +static int iommu_no_mapping(struct device *dev) { + struct pci_dev *pdev; int found; + if (unlikely(dev->bus != &pci_bus_type)) + return 1; + + pdev = to_pci_dev(dev); + if (iommu_dummy(pdev)) + return 1; + if (!iommu_identity_mapping) - return iommu_dummy(pdev); + return 0; found = identity_mapping(pdev); if (found) { - if (pdev->dma_mask > DMA_BIT_MASK(32)) + if (iommu_should_identity_map(pdev, 0)) return 1; else { /* @@ -2450,9 +2524,12 @@ static int iommu_no_mapping(struct pci_dev *pdev) * In case of a detached 64 bit DMA device from vm, the device * is put into si_domain for identity mapping. */ - if (pdev->dma_mask > DMA_BIT_MASK(32)) { + if (iommu_should_identity_map(pdev, 0)) { int ret; ret = domain_add_dev_info(si_domain, pdev); + if (ret) + return 0; + ret = domain_context_mapping(si_domain, pdev, CONTEXT_TT_MULTI_LEVEL); if (!ret) { printk(KERN_INFO "64bit %s uses identity mapping\n", pci_name(pdev)); @@ -2461,7 +2538,7 @@ static int iommu_no_mapping(struct pci_dev *pdev) } } - return iommu_dummy(pdev); + return 0; } static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, @@ -2477,7 +2554,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, BUG_ON(dir == DMA_NONE); - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(hwdev)) return paddr; domain = get_valid_domain_for_dev(pdev); @@ -2485,14 +2562,13 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, return 0; iommu = domain_get_iommu(domain); - size = aligned_size((u64)paddr, size); + size = aligned_nrpages(paddr, size); - iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size), + pdev->dma_mask); if (!iova) goto error; - start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; - /* * Check if DMAR supports zero-length reads on write only * mappings.. @@ -2508,20 +2584,20 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, * might have two guest_addr mapping to the same host paddr, but this * is not a big problem */ - ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PHYSICAL_PAGE_MASK, - size, prot); + ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo), + paddr >> VTD_PAGE_SHIFT, size, prot); if (ret) goto error; /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_paddr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size); else iommu_flush_write_buffer(iommu); - return start_paddr + ((u64)paddr & (~PAGE_MASK)); + start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; + start_paddr += paddr & ~PAGE_MASK; + return start_paddr; error: if (iova) @@ -2614,11 +2690,11 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, { struct pci_dev *pdev = to_pci_dev(dev); struct dmar_domain *domain; - unsigned long start_addr; + unsigned long start_pfn, last_pfn; struct iova *iova; struct intel_iommu *iommu; - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(dev)) return; domain = find_domain(pdev); @@ -2627,22 +2703,25 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, iommu = domain_get_iommu(domain); iova = find_iova(&domain->iovad, IOVA_PFN(dev_addr)); - if (!iova) + if (WARN_ONCE(!iova, "Driver unmaps unmatched page at PFN %llx\n", + (unsigned long long)dev_addr)) return; - start_addr = iova->pfn_lo << PAGE_SHIFT; - size = aligned_size((u64)dev_addr, size); + start_pfn = mm_to_dma_pfn(iova->pfn_lo); + last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1; - pr_debug("Device %s unmapping: %zx@%llx\n", - pci_name(pdev), size, (unsigned long long)start_addr); + pr_debug("Device %s unmapping: pfn %lx-%lx\n", + pci_name(pdev), start_pfn, last_pfn); /* clear the whole page */ - dma_pte_clear_range(domain, start_addr, start_addr + size); + dma_pte_clear_range(domain, start_pfn, last_pfn); + /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, start_addr + size); + dma_pte_free_pagetable(domain, start_pfn, last_pfn); + if (intel_iommu_strict) { - iommu_flush_iotlb_psi(iommu, domain->id, start_addr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, domain->id, start_pfn, + last_pfn - start_pfn + 1); /* free iova */ __free_iova(&domain->iovad, iova); } else { @@ -2700,17 +2779,13 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, enum dma_data_direction dir, struct dma_attrs *attrs) { - int i; struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; - unsigned long start_addr; + unsigned long start_pfn, last_pfn; struct iova *iova; - size_t size = 0; - phys_addr_t addr; - struct scatterlist *sg; struct intel_iommu *iommu; - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(hwdev)) return; domain = find_domain(pdev); @@ -2719,22 +2794,21 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, iommu = domain_get_iommu(domain); iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address)); - if (!iova) + if (WARN_ONCE(!iova, "Driver unmaps unmatched sglist at PFN %llx\n", + (unsigned long long)sglist[0].dma_address)) return; - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size += aligned_size((u64)addr, sg->length); - } - start_addr = iova->pfn_lo << PAGE_SHIFT; + start_pfn = mm_to_dma_pfn(iova->pfn_lo); + last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1; /* clear the whole page */ - dma_pte_clear_range(domain, start_addr, start_addr + size); + dma_pte_clear_range(domain, start_pfn, last_pfn); + /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, start_addr + size); + dma_pte_free_pagetable(domain, start_pfn, last_pfn); - iommu_flush_iotlb_psi(iommu, domain->id, start_addr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, domain->id, start_pfn, + (last_pfn - start_pfn + 1)); /* free iova */ __free_iova(&domain->iovad, iova); @@ -2757,21 +2831,20 @@ static int intel_nontranslate_map_sg(struct device *hddev, static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, enum dma_data_direction dir, struct dma_attrs *attrs) { - phys_addr_t addr; int i; struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; size_t size = 0; int prot = 0; - size_t offset = 0; + size_t offset_pfn = 0; struct iova *iova = NULL; int ret; struct scatterlist *sg; - unsigned long start_addr; + unsigned long start_vpfn; struct intel_iommu *iommu; BUG_ON(dir == DMA_NONE); - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(hwdev)) return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir); domain = get_valid_domain_for_dev(pdev); @@ -2780,12 +2853,11 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne iommu = domain_get_iommu(domain); - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size += aligned_size((u64)addr, sg->length); - } + for_each_sg(sglist, sg, nelems, i) + size += aligned_nrpages(sg->offset, sg->length); - iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size), + pdev->dma_mask); if (!iova) { sglist->dma_length = 0; return 0; @@ -2801,35 +2873,24 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) prot |= DMA_PTE_WRITE; - start_addr = iova->pfn_lo << PAGE_SHIFT; - offset = 0; - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size = aligned_size((u64)addr, sg->length); - ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PHYSICAL_PAGE_MASK, - size, prot); - if (ret) { - /* clear the page */ - dma_pte_clear_range(domain, start_addr, - start_addr + offset); - /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, - start_addr + offset); - /* free iova */ - __free_iova(&domain->iovad, iova); - return 0; - } - sg->dma_address = start_addr + offset + - ((u64)addr & (~PAGE_MASK)); - sg->dma_length = sg->length; - offset += size; + start_vpfn = mm_to_dma_pfn(iova->pfn_lo); + + ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot); + if (unlikely(ret)) { + /* clear the page */ + dma_pte_clear_range(domain, start_vpfn, + start_vpfn + size - 1); + /* free page tables */ + dma_pte_free_pagetable(domain, start_vpfn, + start_vpfn + size - 1); + /* free iova */ + __free_iova(&domain->iovad, iova); + return 0; } /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_addr, - offset >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn); else iommu_flush_write_buffer(iommu); @@ -3334,7 +3395,6 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width) int adjust_width; init_iova_domain(&domain->iovad, DMA_32BIT_PFN); - spin_lock_init(&domain->mapping_lock); spin_lock_init(&domain->iommu_lock); domain_reserve_special_ranges(domain); @@ -3388,8 +3448,6 @@ static void iommu_free_vm_domain(struct dmar_domain *domain) static void vm_domain_exit(struct dmar_domain *domain) { - u64 end; - /* Domain 0 is reserved, so dont process it */ if (!domain) return; @@ -3397,14 +3455,12 @@ static void vm_domain_exit(struct dmar_domain *domain) vm_domain_remove_all_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); - end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~VTD_PAGE_MASK); /* clear ptes */ - dma_pte_clear_range(domain, 0, end); + dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ - dma_pte_free_pagetable(domain, 0, end); + dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); iommu_free_vm_domain(domain); free_domain_mem(domain); @@ -3513,7 +3569,7 @@ static int intel_iommu_map_range(struct iommu_domain *domain, if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping) prot |= DMA_PTE_SNP; - max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size); + max_addr = iova + size; if (dmar_domain->max_addr < max_addr) { int min_agaw; u64 end; @@ -3531,8 +3587,11 @@ static int intel_iommu_map_range(struct iommu_domain *domain, } dmar_domain->max_addr = max_addr; } - - ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot); + /* Round up size to next multiple of PAGE_SIZE, if it and + the low bits of hpa would take us onto the next page */ + size = aligned_nrpages(hpa, size); + ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT, + hpa >> VTD_PAGE_SHIFT, size, prot); return ret; } @@ -3540,15 +3599,15 @@ static void intel_iommu_unmap_range(struct iommu_domain *domain, unsigned long iova, size_t size) { struct dmar_domain *dmar_domain = domain->priv; - dma_addr_t base; - /* The address might not be aligned */ - base = iova & VTD_PAGE_MASK; - size = VTD_PAGE_ALIGN(size); - dma_pte_clear_range(dmar_domain, base, base + size); + if (!size) + return; + + dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT, + (iova + size - 1) >> VTD_PAGE_SHIFT); - if (dmar_domain->max_addr == base + size) - dmar_domain->max_addr = base; + if (dmar_domain->max_addr == iova + size) + dmar_domain->max_addr = iova; } static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, @@ -3558,7 +3617,7 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, struct dma_pte *pte; u64 phys = 0; - pte = addr_to_dma_pte(dmar_domain, iova); + pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT); if (pte) phys = dma_pte_addr(pte); diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c index 2287116e982..46dd440e231 100644 --- a/drivers/pci/iova.c +++ b/drivers/pci/iova.c @@ -1,9 +1,19 @@ /* - * Copyright (c) 2006, Intel Corporation. + * Copyright © 2006-2009, Intel Corporation. * - * This file is released under the GPLv2. + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. * - * Copyright (C) 2006-2008 Intel Corporation * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> */ @@ -123,7 +133,15 @@ move_left: /* Insert the new_iova into domain rbtree by holding writer lock */ /* Add new node and rebalance tree. */ { - struct rb_node **entry = &((prev)), *parent = NULL; + struct rb_node **entry, *parent = NULL; + + /* If we have 'prev', it's a valid place to start the + insertion. Otherwise, start from the root. */ + if (prev) + entry = &prev; + else + entry = &iovad->rbroot.rb_node; + /* Figure out where to put new node */ while (*entry) { struct iova *this = container_of(*entry, diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index d9f06fbfa0b..d986afb7032 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -127,17 +127,23 @@ static inline __attribute_const__ u32 msi_enabled_mask(u16 control) * reliably as devices without an INTx disable bit will then generate a * level IRQ which will never be cleared. */ -static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) +static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) { u32 mask_bits = desc->masked; if (!desc->msi_attrib.maskbit) - return; + return 0; mask_bits &= ~mask; mask_bits |= flag; pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits); - desc->masked = mask_bits; + + return mask_bits; +} + +static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) +{ + desc->masked = __msi_mask_irq(desc, mask, flag); } /* @@ -147,15 +153,21 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) * file. This saves a few milliseconds when initialising devices with lots * of MSI-X interrupts. */ -static void msix_mask_irq(struct msi_desc *desc, u32 flag) +static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) { u32 mask_bits = desc->masked; unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET; + PCI_MSIX_ENTRY_VECTOR_CTRL; mask_bits &= ~1; mask_bits |= flag; writel(mask_bits, desc->mask_base + offset); - desc->masked = mask_bits; + + return mask_bits; +} + +static void msix_mask_irq(struct msi_desc *desc, u32 flag) +{ + desc->masked = __msix_mask_irq(desc, flag); } static void msi_set_mask_bit(unsigned irq, u32 flag) @@ -188,9 +200,9 @@ void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) void __iomem *base = entry->mask_base + entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; - msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); - msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); - msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET); + msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); + msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); + msg->data = readl(base + PCI_MSIX_ENTRY_DATA); } else { struct pci_dev *dev = entry->dev; int pos = entry->msi_attrib.pos; @@ -225,11 +237,9 @@ void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) base = entry->mask_base + entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; - writel(msg->address_lo, - base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); - writel(msg->address_hi, - base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); - writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET); + writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); + writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); + writel(msg->data, base + PCI_MSIX_ENTRY_DATA); } else { struct pci_dev *dev = entry->dev; int pos = entry->msi_attrib.pos; @@ -385,6 +395,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) /* Configure MSI capability structure */ ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); if (ret) { + msi_mask_irq(entry, mask, ~mask); msi_free_irqs(dev); return ret; } @@ -439,8 +450,14 @@ static int msix_capability_init(struct pci_dev *dev, for (i = 0; i < nvec; i++) { entry = alloc_msi_entry(dev); - if (!entry) - break; + if (!entry) { + if (!i) + iounmap(base); + else + msi_free_irqs(dev); + /* No enough memory. Don't try again */ + return -ENOMEM; + } j = entries[i].entry; entry->msi_attrib.is_msix = 1; @@ -487,7 +504,7 @@ static int msix_capability_init(struct pci_dev *dev, set_irq_msi(entry->irq, entry); j = entries[i].entry; entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + PCI_MSIX_ENTRY_VECTOR_CTRL); msix_mask_irq(entry, 1); i++; } @@ -611,9 +628,11 @@ void pci_msi_shutdown(struct pci_dev *dev) pci_intx_for_msi(dev, 1); dev->msi_enabled = 0; + /* Return the device with MSI unmasked as initial states */ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl); mask = msi_capable_mask(ctrl); - msi_mask_irq(desc, mask, ~mask); + /* Keep cached state to be restored */ + __msi_mask_irq(desc, mask, ~mask); /* Restore dev->irq to its default pin-assertion irq */ dev->irq = desc->msi_attrib.default_irq; @@ -653,7 +672,6 @@ static int msi_free_irqs(struct pci_dev* dev) list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { if (entry->msi_attrib.is_msix) { - msix_mask_irq(entry, 1); if (list_is_last(&entry->list, &dev->msi_list)) iounmap(entry->mask_base); } @@ -741,9 +759,17 @@ static void msix_free_all_irqs(struct pci_dev *dev) void pci_msix_shutdown(struct pci_dev* dev) { + struct msi_desc *entry; + if (!pci_msi_enable || !dev || !dev->msix_enabled) return; + /* Return the device with MSI-X masked as initial states */ + list_for_each_entry(entry, &dev->msi_list, list) { + /* Keep cached states to be restored */ + __msix_mask_irq(entry, 1); + } + msix_set_enable(dev, 0); pci_intx_for_msi(dev, 1); dev->msix_enabled = 0; diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index a0662842550..de27c1cb5a2 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,11 +6,11 @@ #ifndef MSI_H #define MSI_H -#define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4 -#define PCI_MSIX_ENTRY_DATA_OFFSET 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12 +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 #define msi_control_reg(base) (base + PCI_MSI_FLAGS) #define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6c93af5ced1..dbd0f947f49 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1517,11 +1517,20 @@ void pci_enable_ari(struct pci_dev *dev) * * Perform INTx swizzling for a device behind one level of bridge. This is * required by section 9.1 of the PCI-to-PCI bridge specification for devices - * behind bridges on add-in cards. + * behind bridges on add-in cards. For devices with ARI enabled, the slot + * number is always 0 (see the Implementation Note in section 2.2.8.1 of + * the PCI Express Base Specification, Revision 2.1) */ u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin) { - return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1; + int slot; + + if (pci_ari_enabled(dev->bus)) + slot = 0; + else + slot = PCI_SLOT(dev->devfn); + + return (((pin - 1) + slot) % 4) + 1; } int @@ -2171,7 +2180,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) u16 ctrl; struct pci_dev *pdev; - if (dev->subordinate) + if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self) return -ENOTTY; list_for_each_entry(pdev, &dev->bus->devices, bus_list) diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c index ece97df4df6..a928d8ab6bd 100644 --- a/drivers/pci/pcie/aer/ecrc.c +++ b/drivers/pci/pcie/aer/ecrc.c @@ -106,7 +106,7 @@ void pcie_set_ecrc_checking(struct pci_dev *dev) disable_ecrc_checking(dev); break; case ECRC_POLICY_ON: - enable_ecrc_checking(dev);; + enable_ecrc_checking(dev); break; default: return; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 56552d74abe..06b96562396 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1058,6 +1058,11 @@ static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3); +/* ALi loses some register settings that we cannot then restore */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3); +/* VIA comes back fine but we need to keep it alive or ACPI GTM failures + occur when mode detecting */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index eddb0748b0e..8c02b6c53bd 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -311,7 +311,7 @@ EXPORT_SYMBOL_GPL(pci_destroy_slot); #include <linux/pci_hotplug.h> /** * pci_hp_create_link - create symbolic link to the hotplug driver module. - * @slot: struct pci_slot + * @pci_slot: struct pci_slot * * Helper function for pci_hotplug_core.c to create symbolic link to * the hotplug driver module. @@ -334,7 +334,7 @@ EXPORT_SYMBOL_GPL(pci_hp_create_module_link); /** * pci_hp_remove_link - remove symbolic link to the hotplug driver module. - * @slot: struct pci_slot + * @pci_slot: struct pci_slot * * Helper function for pci_hotplug_core.c to remove symbolic link to * the hotplug driver module. diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 9ad97ea836e..8eb04230fec 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -472,7 +472,8 @@ static int __init init_tcic(void) init_timer(&poll_timer); /* Build interrupt mask */ - printk(", %d sockets\n" KERN_INFO " irq list (", sockets); + printk(KERN_CONT ", %d sockets\n", sockets); + printk(KERN_INFO " irq list ("); if (irq_list_count == 0) mask = irq_mask; else diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index 659421d0ca4..d4ad50d737b 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -1,7 +1,7 @@ /* * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services. * - * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,7 +32,7 @@ #include "i82365.h" MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services"); -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_LICENSE("GPL"); #define CARD_MAX_SLOTS 2 diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c index 812f038e9bd..9b3c15827e5 100644 --- a/drivers/pcmcia/vrc4173_cardu.c +++ b/drivers/pcmcia/vrc4173_cardu.c @@ -6,7 +6,7 @@ * NEC VRC4173 CARDU driver for Socket Services * (This device doesn't support CardBus. it is supporting only 16bit PC Card.) * - * Copyright 2002,2003 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright 2002,2003 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -41,7 +41,7 @@ #include "vrc4173_cardu.h" MODULE_DESCRIPTION("NEC VRC4173 CARDU driver for Socket Services"); -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_LICENSE("GPL"); static int vrc4173_cardu_slots; diff --git a/drivers/pcmcia/vrc4173_cardu.h b/drivers/pcmcia/vrc4173_cardu.h index 7d77c74120c..a7d96018ed8 100644 --- a/drivers/pcmcia/vrc4173_cardu.h +++ b/drivers/pcmcia/vrc4173_cardu.h @@ -5,7 +5,7 @@ * BRIEF MODULE DESCRIPTION * Include file for NEC VRC4173 CARDU. * - * Copyright 2002 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright 2002 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7232fe7104a..46dad12f952 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -355,6 +355,7 @@ config EEEPC_LAPTOP depends on INPUT depends on EXPERIMENTAL depends on RFKILL || RFKILL = n + depends on HOTPLUG_PCI select BACKLIGHT_CLASS_DEVICE select HWMON ---help--- diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 4207b26ff99..ec560f16d72 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -16,6 +16,8 @@ * GNU General Public License for more details. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -31,6 +33,7 @@ #include <linux/input.h> #include <linux/rfkill.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #define EEEPC_LAPTOP_VERSION "0.1" @@ -40,11 +43,6 @@ #define EEEPC_HOTK_DEVICE_NAME "Hotkey" #define EEEPC_HOTK_HID "ASUS010" -#define EEEPC_LOG EEEPC_HOTK_FILE ": " -#define EEEPC_ERR KERN_ERR EEEPC_LOG -#define EEEPC_WARNING KERN_WARNING EEEPC_LOG -#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG -#define EEEPC_INFO KERN_INFO EEEPC_LOG /* * Definitions for Asus EeePC @@ -141,8 +139,10 @@ struct eeepc_hotk { u16 event_count[128]; /* count for each event */ struct input_dev *inputdev; u16 *keycode_map; - struct rfkill *eeepc_wlan_rfkill; - struct rfkill *eeepc_bluetooth_rfkill; + struct rfkill *wlan_rfkill; + struct rfkill *bluetooth_rfkill; + struct rfkill *wwan3g_rfkill; + struct hotplug_slot *hotplug_slot; }; /* The actual device the driver binds to */ @@ -213,6 +213,15 @@ static struct acpi_driver eeepc_hotk_driver = { }, }; +/* PCI hotplug ops */ +static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value); + +static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { + .owner = THIS_MODULE, + .get_adapter_status = eeepc_get_adapter_status, + .get_power_status = eeepc_get_adapter_status, +}; + /* The backlight device /sys/class/backlight */ static struct backlight_device *eeepc_backlight_device; @@ -274,20 +283,20 @@ static int set_acpi(int cm, int value) if (method == NULL) return -ENODEV; if (write_acpi_int(ehotk->handle, method, value, NULL)) - printk(EEEPC_WARNING "Error writing %s\n", method); + pr_warning("Error writing %s\n", method); } return 0; } static int get_acpi(int cm) { - int value = -1; + int value = -ENODEV; if ((ehotk->cm_supported & (0x1 << cm))) { const char *method = cm_getv[cm]; if (method == NULL) return -ENODEV; if (read_acpi_int(ehotk->handle, method, &value)) - printk(EEEPC_WARNING "Error reading %s\n", method); + pr_warning("Error reading %s\n", method); } return value; } @@ -359,13 +368,19 @@ static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) rv = parse_arg(buf, count, &value); if (rv > 0) - set_acpi(cm, value); + value = set_acpi(cm, value); + if (value < 0) + return value; return rv; } static ssize_t show_sys_acpi(int cm, char *buf) { - return sprintf(buf, "%d\n", get_acpi(cm)); + int value = get_acpi(cm); + + if (value < 0) + return value; + return sprintf(buf, "%d\n", value); } #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \ @@ -539,6 +554,28 @@ static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) return -EINVAL; } +static void cmsg_quirk(int cm, const char *name) +{ + int dummy; + + /* Some BIOSes do not report cm although it is avaliable. + Check if cm_getv[cm] works and, if yes, assume cm should be set. */ + if (!(ehotk->cm_supported & (1 << cm)) + && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) { + pr_info("%s (%x) not reported by BIOS," + " enabling anyway\n", name, 1 << cm); + ehotk->cm_supported |= 1 << cm; + } +} + +static void cmsg_quirks(void) +{ + cmsg_quirk(CM_ASL_LID, "LID"); + cmsg_quirk(CM_ASL_TYPE, "TYPE"); + cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER"); + cmsg_quirk(CM_ASL_TPD, "TPD"); +} + static int eeepc_hotk_check(void) { const struct key_entry *key; @@ -551,26 +588,24 @@ static int eeepc_hotk_check(void) if (ehotk->device->status.present) { if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, &buffer)) { - printk(EEEPC_ERR "Hotkey initialization failed\n"); + pr_err("Hotkey initialization failed\n"); return -ENODEV; } else { - printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n", - ehotk->init_flag); + pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag); } /* get control methods supported */ if (read_acpi_int(ehotk->handle, "CMSG" , &ehotk->cm_supported)) { - printk(EEEPC_ERR - "Get control methods supported failed\n"); + pr_err("Get control methods supported failed\n"); return -ENODEV; } else { - printk(EEEPC_INFO - "Get control methods supported: 0x%x\n", - ehotk->cm_supported); + cmsg_quirks(); + pr_info("Get control methods supported: 0x%x\n", + ehotk->cm_supported); } ehotk->inputdev = input_allocate_device(); if (!ehotk->inputdev) { - printk(EEEPC_INFO "Unable to allocate input device\n"); + pr_info("Unable to allocate input device\n"); return 0; } ehotk->inputdev->name = "Asus EeePC extra buttons"; @@ -589,12 +624,12 @@ static int eeepc_hotk_check(void) } result = input_register_device(ehotk->inputdev); if (result) { - printk(EEEPC_INFO "Unable to register input device\n"); + pr_info("Unable to register input device\n"); input_free_device(ehotk->inputdev); return 0; } } else { - printk(EEEPC_ERR "Hotkey device not present, aborting\n"); + pr_err("Hotkey device not present, aborting\n"); return -EINVAL; } return 0; @@ -612,6 +647,19 @@ static int notify_brn(void) return -1; } +static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, + u8 *value) +{ + int val = get_acpi(CM_ASL_WLAN); + + if (val == 1 || val == 0) + *value = val; + else + return -EINVAL; + + return 0; +} + static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; @@ -619,7 +667,7 @@ static void eeepc_rfkill_hotplug(void) bool blocked; if (!bus) { - printk(EEEPC_WARNING "Unable to find PCI bus 1?\n"); + pr_warning("Unable to find PCI bus 1?\n"); return; } @@ -635,7 +683,7 @@ static void eeepc_rfkill_hotplug(void) if (dev) { pci_bus_assign_resources(bus); if (pci_bus_add_device(dev)) - printk(EEEPC_ERR "Unable to hotplug wifi\n"); + pr_err("Unable to hotplug wifi\n"); } } else { dev = pci_get_slot(bus, 0); @@ -645,7 +693,7 @@ static void eeepc_rfkill_hotplug(void) } } - rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked); + rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) @@ -718,8 +766,7 @@ static int eeepc_register_rfkill_notifier(char *node) eeepc_rfkill_notify, NULL); if (ACPI_FAILURE(status)) - printk(EEEPC_WARNING - "Failed to register notify on %s\n", node); + pr_warning("Failed to register notify on %s\n", node); } else return -ENODEV; @@ -738,19 +785,66 @@ static void eeepc_unregister_rfkill_notifier(char *node) ACPI_SYSTEM_NOTIFY, eeepc_rfkill_notify); if (ACPI_FAILURE(status)) - printk(EEEPC_ERR - "Error removing rfkill notify handler %s\n", + pr_err("Error removing rfkill notify handler %s\n", node); } } +static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot) +{ + kfree(hotplug_slot->info); + kfree(hotplug_slot); +} + +static int eeepc_setup_pci_hotplug(void) +{ + int ret = -ENOMEM; + struct pci_bus *bus = pci_find_bus(0, 1); + + if (!bus) { + pr_err("Unable to find wifi PCI bus\n"); + return -ENODEV; + } + + ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); + if (!ehotk->hotplug_slot) + goto error_slot; + + ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), + GFP_KERNEL); + if (!ehotk->hotplug_slot->info) + goto error_info; + + ehotk->hotplug_slot->private = ehotk; + ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; + ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops; + eeepc_get_adapter_status(ehotk->hotplug_slot, + &ehotk->hotplug_slot->info->adapter_status); + + ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); + if (ret) { + pr_err("Unable to register hotplug slot - %d\n", ret); + goto error_register; + } + + return 0; + +error_register: + kfree(ehotk->hotplug_slot->info); +error_info: + kfree(ehotk->hotplug_slot); + ehotk->hotplug_slot = NULL; +error_slot: + return ret; +} + static int eeepc_hotk_add(struct acpi_device *device) { int result; if (!device) return -EINVAL; - printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n"); + pr_notice(EEEPC_HOTK_NAME "\n"); ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); if (!ehotk) return -ENOMEM; @@ -764,53 +858,8 @@ static int eeepc_hotk_add(struct acpi_device *device) if (result) goto ehotk_fail; - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - - if (get_acpi(CM_ASL_WLAN) != -1) { - ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan", - &device->dev, - RFKILL_TYPE_WLAN, - &eeepc_rfkill_ops, - (void *)CM_ASL_WLAN); - - if (!ehotk->eeepc_wlan_rfkill) - goto wlan_fail; - - rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill, - get_acpi(CM_ASL_WLAN) != 1); - result = rfkill_register(ehotk->eeepc_wlan_rfkill); - if (result) - goto wlan_fail; - } - - if (get_acpi(CM_ASL_BLUETOOTH) != -1) { - ehotk->eeepc_bluetooth_rfkill = - rfkill_alloc("eeepc-bluetooth", - &device->dev, - RFKILL_TYPE_BLUETOOTH, - &eeepc_rfkill_ops, - (void *)CM_ASL_BLUETOOTH); - - if (!ehotk->eeepc_bluetooth_rfkill) - goto bluetooth_fail; - - rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill, - get_acpi(CM_ASL_BLUETOOTH) != 1); - result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); - if (result) - goto bluetooth_fail; - } - return 0; - bluetooth_fail: - rfkill_destroy(ehotk->eeepc_bluetooth_rfkill); - rfkill_unregister(ehotk->eeepc_wlan_rfkill); - wlan_fail: - rfkill_destroy(ehotk->eeepc_wlan_rfkill); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: kfree(ehotk); ehotk = NULL; @@ -823,16 +872,13 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type) if (!device || !acpi_driver_data(device)) return -EINVAL; - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); - kfree(ehotk); return 0; } static int eeepc_hotk_resume(struct acpi_device *device) { - if (ehotk->eeepc_wlan_rfkill) { + if (ehotk->wlan_rfkill) { bool wlan; /* Workaround - it seems that _PTS disables the wireless @@ -844,14 +890,13 @@ static int eeepc_hotk_resume(struct acpi_device *device) wlan = get_acpi(CM_ASL_WLAN); set_acpi(CM_ASL_WLAN, wlan); - rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, - wlan != 1); + rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1); eeepc_rfkill_hotplug(); } - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill, + if (ehotk->bluetooth_rfkill) + rfkill_set_sw_state(ehotk->bluetooth_rfkill, get_acpi(CM_ASL_BLUETOOTH) != 1); return 0; @@ -973,10 +1018,16 @@ static void eeepc_backlight_exit(void) static void eeepc_rfkill_exit(void) { - if (ehotk->eeepc_wlan_rfkill) - rfkill_unregister(ehotk->eeepc_wlan_rfkill); - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (ehotk->wlan_rfkill) + rfkill_unregister(ehotk->wlan_rfkill); + if (ehotk->bluetooth_rfkill) + rfkill_unregister(ehotk->bluetooth_rfkill); + if (ehotk->wwan3g_rfkill) + rfkill_unregister(ehotk->wwan3g_rfkill); + if (ehotk->hotplug_slot) + pci_hp_deregister(ehotk->hotplug_slot); } static void eeepc_input_exit(void) @@ -1011,6 +1062,75 @@ static void __exit eeepc_laptop_exit(void) platform_driver_unregister(&platform_driver); } +static int eeepc_new_rfkill(struct rfkill **rfkill, + const char *name, struct device *dev, + enum rfkill_type type, int cm) +{ + int result; + + result = get_acpi(cm); + if (result < 0) + return result; + + *rfkill = rfkill_alloc(name, dev, type, + &eeepc_rfkill_ops, (void *)(unsigned long)cm); + + if (!*rfkill) + return -EINVAL; + + rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1); + result = rfkill_register(*rfkill); + if (result) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return result; + } + return 0; +} + + +static int eeepc_rfkill_init(struct device *dev) +{ + int result = 0; + + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + + result = eeepc_new_rfkill(&ehotk->wlan_rfkill, + "eeepc-wlan", dev, + RFKILL_TYPE_WLAN, CM_ASL_WLAN); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill, + "eeepc-bluetooth", dev, + RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill, + "eeepc-wwan3g", dev, + RFKILL_TYPE_WWAN, CM_ASL_3G); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_setup_pci_hotplug(); + /* + * If we get -EBUSY then something else is handling the PCI hotplug - + * don't fail in this case + */ + if (result == -EBUSY) + result = 0; + +exit: + if (result && result != -ENODEV) + eeepc_rfkill_exit(); + return result; +} + static int eeepc_backlight_init(struct device *dev) { struct backlight_device *bd; @@ -1018,8 +1138,7 @@ static int eeepc_backlight_init(struct device *dev) bd = backlight_device_register(EEEPC_HOTK_FILE, dev, NULL, &eeepcbl_ops); if (IS_ERR(bd)) { - printk(EEEPC_ERR - "Could not register eeepc backlight device\n"); + pr_err("Could not register eeepc backlight device\n"); eeepc_backlight_device = NULL; return PTR_ERR(bd); } @@ -1038,8 +1157,7 @@ static int eeepc_hwmon_init(struct device *dev) hwmon = hwmon_device_register(dev); if (IS_ERR(hwmon)) { - printk(EEEPC_ERR - "Could not register eeepc hwmon device\n"); + pr_err("Could not register eeepc hwmon device\n"); eeepc_hwmon_device = NULL; return PTR_ERR(hwmon); } @@ -1065,19 +1183,6 @@ static int __init eeepc_laptop_init(void) acpi_bus_unregister_driver(&eeepc_hotk_driver); return -ENODEV; } - dev = acpi_get_physical_device(ehotk->device->handle); - - if (!acpi_video_backlight_support()) { - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; - } else - printk(EEEPC_INFO "Backlight controlled by ACPI video " - "driver\n"); - - result = eeepc_hwmon_init(dev); - if (result) - goto fail_hwmon; eeepc_enable_camera(); @@ -1097,7 +1202,33 @@ static int __init eeepc_laptop_init(void) &platform_attribute_group); if (result) goto fail_sysfs; + + dev = &platform_device->dev; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + pr_info("Backlight controlled by ACPI video " + "driver\n"); + + result = eeepc_hwmon_init(dev); + if (result) + goto fail_hwmon; + + result = eeepc_rfkill_init(dev); + if (result) + goto fail_rfkill; + return 0; +fail_rfkill: + eeepc_hwmon_exit(); +fail_hwmon: + eeepc_backlight_exit(); +fail_backlight: + sysfs_remove_group(&platform_device->dev.kobj, + &platform_attribute_group); fail_sysfs: platform_device_del(platform_device); fail_platform_device2: @@ -1105,12 +1236,7 @@ fail_platform_device2: fail_platform_device1: platform_driver_unregister(&platform_driver); fail_platform_driver: - eeepc_hwmon_exit(); -fail_hwmon: - eeepc_backlight_exit(); -fail_backlight: eeepc_input_exit(); - eeepc_rfkill_exit(); return result; } diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index aafd3e6ebb0..a118eb0f1e6 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -1,8 +1,8 @@ /* * Blackfin On-Chip Real Time Clock Driver - * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789] + * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x * - * Copyright 2004-2008 Analog Devices Inc. + * Copyright 2004-2009 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -363,7 +363,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) struct bfin_rtc *rtc; struct device *dev = &pdev->dev; int ret = 0; - unsigned long timeout; + unsigned long timeout = jiffies + HZ; dev_dbg_stamp(dev); @@ -374,32 +374,32 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); device_init_wakeup(dev, 1); + /* Register our RTC with the RTC framework */ + rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, + THIS_MODULE); + if (unlikely(IS_ERR(rtc->rtc_dev))) { + ret = PTR_ERR(rtc->rtc_dev); + goto err; + } + /* Grab the IRQ and init the hardware */ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev); if (unlikely(ret)) - goto err; + goto err_reg; /* sometimes the bootloader touched things, but the write complete was not * enabled, so let's just do a quick timeout here since the IRQ will not fire ... */ - timeout = jiffies + HZ; while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING) if (time_after(jiffies, timeout)) break; bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE); bfin_write_RTC_SWCNT(0); - /* Register our RTC with the RTC framework */ - rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE); - if (unlikely(IS_ERR(rtc->rtc_dev))) { - ret = PTR_ERR(rtc->rtc_dev); - goto err_irq; - } - return 0; - err_irq: - free_irq(IRQ_RTC, dev); - err: +err_reg: + rtc_device_unregister(rtc->rtc_dev); +err: kfree(rtc); return ret; } diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 32b27739ec2..713f7bf5afb 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -283,7 +283,7 @@ static void ds1374_work(struct work_struct *work) stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); if (stat < 0) - return; + goto unlock; if (stat & DS1374_REG_SR_AF) { stat &= ~DS1374_REG_SR_AF; @@ -302,7 +302,7 @@ static void ds1374_work(struct work_struct *work) out: if (!ds1374->exiting) enable_irq(client->irq); - +unlock: mutex_unlock(&ds1374->mutex); } diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index f11297aff85..2c839d0d21b 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -1,7 +1,7 @@ /* * Driver for NEC VR4100 series Real Time Clock unit. * - * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +33,7 @@ #include <asm/io.h> #include <asm/uaccess.h> -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_DESCRIPTION("NEC VR4100 series RTC driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 0471f880048..4240b05aef6 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -2826,8 +2826,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); /* Maybe it is sufficient just to release the ST-DMA lock... (if * possible at all) At least, we should check if the lock could be diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild index 25a2032bfa2..70d060b7ff4 100644 --- a/drivers/scsi/cxgb3i/Kbuild +++ b/drivers/scsi/cxgb3i/Kbuild @@ -1,4 +1,4 @@ -EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 +EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3 cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index 74369a3f963..c399f485aa7 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -13,6 +13,7 @@ #include <linux/inet.h> #include <linux/crypto.h> +#include <linux/if_vlan.h> #include <net/dst.h> #include <net/tcp.h> #include <scsi/scsi_cmnd.h> @@ -184,6 +185,9 @@ static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev) struct cxgb3i_adapter *snic; int i; + if (ndev->priv_flags & IFF_802_1Q_VLAN) + ndev = vlan_dev_real_dev(ndev); + read_lock(&cxgb3i_snic_rwlock); list_for_each_entry(snic, &cxgb3i_snic_list, list_head) { for (i = 0; i < snic->hba_cnt; i++) { diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c index a84072865fc..2c266c01dc5 100644 --- a/drivers/scsi/fnic/fnic_main.c +++ b/drivers/scsi/fnic/fnic_main.c @@ -473,16 +473,16 @@ static int __devinit fnic_probe(struct pci_dev *pdev, * limitation for the device. Try 40-bit first, and * fail to 32-bit. */ - err = pci_set_dma_mask(pdev, DMA_40BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40)); if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "No usable DMA configuration " "aborting\n"); goto err_out_release_regions; } - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "Unable to obtain 32-bit DMA " @@ -490,7 +490,7 @@ static int __devinit fnic_probe(struct pci_dev *pdev, goto err_out_release_regions; } } else { - err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "Unable to obtain 40-bit DMA " diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index eabf3650285..bfc996971b8 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -245,7 +245,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, struct vnic_wq_copy *wq, struct fnic_io_req *io_req, struct scsi_cmnd *sc, - u32 sg_count) + int sg_count) { struct scatterlist *sg; struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); @@ -260,9 +260,6 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, char msg[2]; if (sg_count) { - BUG_ON(sg_count < 0); - BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT); - /* For each SGE, create a device desc entry */ desc = io_req->sgl_list; for_each_sg(scsi_sglist(sc), sg, sg_count, i) { @@ -344,7 +341,7 @@ int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) struct fnic *fnic; struct vnic_wq_copy *wq; int ret; - u32 sg_count; + int sg_count; unsigned long flags; unsigned long ptr; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 869a11bdccb..9928704e235 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1095,9 +1095,14 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct) MAX_INDIRECT_BUFS); hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS; } + + if (hostdata->madapter_info.os_type == 3) { + enable_fast_fail(hostdata); + return; + } } - enable_fast_fail(hostdata); + send_srp_login(hostdata); } /** diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index b12ad7c7c67..18735b39b3d 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -75,8 +75,9 @@ static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd * int i; printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); for (i = 0; i < cmd->cmd_len; ++i) - printk(" %.2x", cmd->cmnd[i]); - printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", + printk(KERN_CONT " %.2x", cmd->cmnd[i]); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd)); } #endif diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 2eee9e6e4fe..292c02f810d 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3670,13 +3670,14 @@ static void fc_bsg_goose_queue(struct fc_rport *rport) { int flagset; + unsigned long flags; if (!rport->rqst_q) return; get_device(&rport->dev); - spin_lock(rport->rqst_q->queue_lock); + spin_lock_irqsave(rport->rqst_q->queue_lock, flags); flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) && !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags); if (flagset) @@ -3684,7 +3685,7 @@ fc_bsg_goose_queue(struct fc_rport *rport) __blk_run_queue(rport->rqst_q); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q); - spin_unlock(rport->rqst_q->queue_lock); + spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags); put_device(&rport->dev); } diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 8201387b4da..4d6f2fe1cfe 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -210,13 +210,11 @@ static void sg_put_dev(Sg_device *sdp); static int sg_allow_access(struct file *filp, unsigned char *cmd) { struct sg_fd *sfp = (struct sg_fd *)filp->private_data; - struct request_queue *q = sfp->parentdp->device->request_queue; if (sfp->parentdp->device->type == TYPE_SCANNER) return 0; - return blk_verify_command(&q->cmd_filter, - cmd, filp->f_mode & FMODE_WRITE); + return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE); } static int @@ -621,7 +619,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) if (strcmp(current->comm, cmd) && printk_ratelimit()) { printk(KERN_WARNING "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--" - "guessing data in;\n" KERN_WARNING " " + "guessing data in;\n " "program %s not setting count and/or reply_len properly\n", old_hdr.reply_len - (int)SZ_SG_HEADER, input_size, (unsigned int) cmnd[0], diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index bcaba86060a..75da6e58ce5 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -2860,8 +2860,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); return SCSI_ABORT_NOT_RUNNING; } diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 97f3158fa7b..27e84e4b1fa 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -134,7 +134,7 @@ zalon_probe(struct parisc_device *dev) host = ncr_attach(&zalon7xx_template, unit, &device); if (!host) - goto fail; + return -ENODEV; if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) { dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ", diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index a07015d646d..e7108e75653 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -60,11 +60,12 @@ struct serial_private { static void moan_device(const char *str, struct pci_dev *dev) { - printk(KERN_WARNING "%s: %s\n" - KERN_WARNING "Please send the output of lspci -vv, this\n" - KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" - KERN_WARNING "manufacturer and name of serial board or\n" - KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n", + printk(KERN_WARNING + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to rmk+serial@arm.linux.org.uk.\n", pci_name(dev), str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } @@ -759,6 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev) /* subdevice 0x00PS means <P> parallel, <S> serial */ unsigned int num_serial = dev->subsystem_device & 0xf; + if (dev->device == PCI_DEVICE_ID_NETMOS_9901) + return 0; if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) return 0; @@ -3557,6 +3560,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 66f52674ca0..8e2feb56334 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -707,24 +707,25 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; + unsigned short ssr_status, scr_status, err_enabled; struct uart_port *port = ptr; irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port, SCxSR); scr_status = sci_in(port, SCSCR); + err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE)) ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE)) ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); return ret; diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 0573f3b5175..dac550e57c2 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -1,7 +1,7 @@ /* * Driver for NEC VR4100 series Serial Interface Unit. * - * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * Based on drivers/serial/8250.c, by Russell King. * diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index aa90ddb3706..8980a5640bd 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -514,6 +514,8 @@ static int __init uwire_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->flags = SPI_MASTER_HALF_DUPLEX; + master->bus_num = 2; /* "official" */ master->num_chipselect = 4; master->setup = uwire_setup; diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 2a5abc08e85..f1db395dd88 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -258,6 +258,11 @@ static void bitbang_work(struct work_struct *work) struct spi_bitbang *bitbang = container_of(work, struct spi_bitbang, work); unsigned long flags; + int do_setup = -1; + int (*setup_transfer)(struct spi_device *, + struct spi_transfer *); + + setup_transfer = bitbang->setup_transfer; spin_lock_irqsave(&bitbang->lock, flags); bitbang->busy = 1; @@ -269,8 +274,6 @@ static void bitbang_work(struct work_struct *work) unsigned tmp; unsigned cs_change; int status; - int (*setup_transfer)(struct spi_device *, - struct spi_transfer *); m = container_of(bitbang->queue.next, struct spi_message, queue); @@ -287,19 +290,19 @@ static void bitbang_work(struct work_struct *work) tmp = 0; cs_change = 1; status = 0; - setup_transfer = NULL; list_for_each_entry (t, &m->transfers, transfer_list) { - /* override or restore speed and wordsize */ - if (t->speed_hz || t->bits_per_word) { - setup_transfer = bitbang->setup_transfer; + /* override speed or wordsize? */ + if (t->speed_hz || t->bits_per_word) + do_setup = 1; + + /* init (-1) or override (1) transfer params */ + if (do_setup != 0) { if (!setup_transfer) { status = -ENOPROTOOPT; break; } - } - if (setup_transfer) { status = setup_transfer(spi, t); if (status < 0) break; @@ -363,9 +366,10 @@ static void bitbang_work(struct work_struct *work) m->status = status; m->complete(m->context); - /* restore speed and wordsize */ - if (setup_transfer) + /* restore speed and wordsize if it was overridden */ + if (do_setup == 1) setup_transfer(spi, NULL); + do_setup = 0; /* normally deactivate chipselect ... unless no error and * cs_change has hinted that the next message will probably diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 5d869c4d3eb..606e7a40a8d 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -58,15 +58,20 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; /* Bit masks for spi_device.mode management. Note that incorrect - * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other - * devices on a shared bus: CS_HIGH, because this device will be - * active when it shouldn't be; 3WIRE, because when active it won't - * behave as it should. + * settings for some settings can cause *lots* of trouble for other + * devices on a shared bus: * - * REVISIT should changing those two modes be privileged? + * - CS_HIGH ... this device will be active when it shouldn't be + * - 3WIRE ... when active, it won't behave as it should + * - NO_CS ... there will be no explicit message boundaries; this + * is completely incompatible with the shared bus model + * - READY ... transfers may proceed when they shouldn't. + * + * REVISIT should changing those flags be privileged? */ #define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \ - | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP) + | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \ + | SPI_NO_CS | SPI_READY) struct spidev_data { dev_t devt; diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 3fd3e3b412b..3c6feed46f6 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { static inline u32 ssb_irqflag(struct ssb_device *dev) { - return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; + u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); + if (tpsflag) + return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; + else + /* not irq supported */ + return 0x3f; +} + +static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) +{ + struct ssb_bus *bus = rdev->bus; + int i; + for (i = 0; i < bus->nr_devices; i++) { + struct ssb_device *dev; + dev = &(bus->devices[i]); + if (ssb_irqflag(dev) == irqflag) + return dev; + } + return NULL; } /* Get the MIPS IRQ assignment for a specified device. * If unassigned, 0 is returned. + * If disabled, 5 is returned. + * If not supported, 6 is returned. */ unsigned int ssb_mips_irq(struct ssb_device *dev) { struct ssb_bus *bus = dev->bus; + struct ssb_device *mdev = bus->mipscore.dev; u32 irqflag; u32 ipsflag; u32 tmp; unsigned int irq; irqflag = ssb_irqflag(dev); + if (irqflag == 0x3f) + return 6; ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); for (irq = 1; irq <= 4; irq++) { tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); if (tmp == irqflag) break; } - if (irq == 5) - irq = 0; + if (irq == 5) { + if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) + irq = 0; + } return irq; } @@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *dev, unsigned int irq) struct ssb_device *mdev = bus->mipscore.dev; u32 irqflag = ssb_irqflag(dev); + BUG_ON(oldirq == 6); + dev->irq = irq + 2; - ssb_dprintk(KERN_INFO PFX - "set_irq: core 0x%04x, irq %d => %d\n", - dev->id.coreid, oldirq, irq); /* clear the old irq */ if (oldirq == 0) ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); - else + else if (oldirq != 5) clear_irq(bus, oldirq); /* assign the new one */ if (irq == 0) { ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); } else { + u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); + if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { + u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; + struct ssb_device *olddev = find_device(dev, oldipsflag); + if (olddev) + set_irq(olddev, 0); + } irqflag <<= ipsflag_irq_shift[irq]; - irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); + irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); ssb_write32(mdev, SSB_IPSFLAG, irqflag); } + ssb_dprintk(KERN_INFO PFX + "set_irq: core 0x%04x, irq %d => %d\n", + dev->id.coreid, oldirq+2, irq+2); +} + +static void print_irq(struct ssb_device *dev, unsigned int irq) +{ + int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; + ssb_dprintk(KERN_INFO PFX + "core 0x%04x, irq :", dev->id.coreid); + for (i = 0; i <= 6; i++) { + ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); + } + ssb_dprintk("\n"); +} + +static void dump_irq(struct ssb_bus *bus) +{ + int i; + for (i = 0; i < bus->nr_devices; i++) { + struct ssb_device *dev; + dev = &(bus->devices[i]); + print_irq(dev, ssb_mips_irq(dev)); + } } static void ssb_mips_serial_init(struct ssb_mipscore *mcore) @@ -197,16 +253,23 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore) /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ for (irq = 2, i = 0; i < bus->nr_devices; i++) { + int mips_irq; dev = &(bus->devices[i]); - dev->irq = ssb_mips_irq(dev) + 2; + mips_irq = ssb_mips_irq(dev); + if (mips_irq > 4) + dev->irq = 0; + else + dev->irq = mips_irq + 2; + if (dev->irq > 5) + continue; switch (dev->id.coreid) { case SSB_DEV_USB11_HOST: /* shouldn't need a separate irq line for non-4710, most of them have a proper * external usb controller on the pci */ if ((bus->chip_id == 0x4710) && (irq <= 4)) { set_irq(dev, irq++); - break; } + break; /* fallthrough */ case SSB_DEV_PCI: case SSB_DEV_ETHERNET: @@ -220,6 +283,8 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore) } } } + ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); + dump_irq(bus); ssb_mips_serial_init(mcore); ssb_mips_flash_detect(mcore); diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index d288608d220..100e7a5c5ea 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) ssb_printk("."); err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); if (err) { - ssb_printk("\n" KERN_NOTICE PFX + ssb_printk(KERN_NOTICE PFX "Failed to write to SPROM.\n"); failed = 1; break; @@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) } err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); if (err) { - ssb_printk("\n" KERN_NOTICE PFX + ssb_printk(KERN_NOTICE PFX "Could not disable SPROM write access.\n"); failed = 1; } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 38bfdb0f666..3f104599347 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -550,7 +550,7 @@ static void acm_waker(struct work_struct *waker) static int acm_tty_open(struct tty_struct *tty, struct file *filp) { struct acm *acm; - int rv = -EINVAL; + int rv = -ENODEV; int i; dbg("Entering acm_tty_open."); @@ -677,7 +677,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) /* Perform the closing process and see if we need to do the hardware shutdown */ - if (tty_port_close_start(&acm->port, tty, filp) == 0) + if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0) return; acm_port_down(acm, 0); tty_port_close_end(&acm->port, tty); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index ce3f453f02e..95ccfa0b9fc 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -648,7 +648,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) struct urb *urb; int length; unsigned long flags; - char buffer[4]; /* Any root hubs with > 31 ports? */ + char buffer[6]; /* Any root hubs with > 31 ports? */ if (unlikely(!hcd->rh_registered)) return; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1576a0520ad..0c03471f0d4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -337,10 +337,10 @@ config USB_R8A66597_HCD config SUPERH_ON_CHIP_R8A66597 boolean "Enable SuperH on-chip R8A66597 USB" - depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) + depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724) help This driver enables support for the on-chip R8A66597 in the - SH7366 and SH7723 processors. + SH7366, SH7723 and SH7724 processors. config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index f8d9045d668..0f7a30b7d2d 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1261,7 +1261,7 @@ static int mon_alloc_buff(struct mon_pgmap *map, int npages) return -ENOMEM; } map[n].ptr = (unsigned char *) vaddr; - map[n].pg = virt_to_page(vaddr); + map[n].pg = virt_to_page((void *) vaddr); } return 0; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index d595aa5586a..a84216464ca 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -333,6 +333,9 @@ static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __func__, port->number); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d6d65ef85f5..8afcf08eba9 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -616,6 +616,8 @@ config FB_STI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select STI_CONSOLE + select VT default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index fb8163d181a..a21efcd10b7 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -226,9 +226,10 @@ static int clcdfb_set_par(struct fb_info *info) clcdfb_enable(fb, regs.cntl); #ifdef DEBUG - printk(KERN_INFO "CLCD: Registers set to\n" - KERN_INFO " %08x %08x %08x %08x\n" - KERN_INFO " %08x %08x %08x %08x\n", + printk(KERN_INFO + "CLCD: Registers set to\n" + " %08x %08x %08x %08x\n" + " %08x %08x %08x %08x\n", readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1), readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3), readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS), diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 018850c116c..8cd279be74e 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2405,6 +2405,9 @@ static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive) return 0; } +/* fbhw->encode_fix() must be called with fb_info->mm_lock held + * if it is called after the register_framebuffer() - not a case here + */ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) { struct atafb_par par; @@ -2414,7 +2417,8 @@ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) if (err) return err; memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - return fbhw->encode_fix(fix, &par); + err = fbhw->encode_fix(fix, &par); + return err; } static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -2743,7 +2747,9 @@ static int atafb_set_par(struct fb_info *info) /* Decode wanted screen parameters */ fbhw->decode_var(&info->var, par); + mutex_lock(&info->mm_lock); fbhw->encode_fix(&info->fix, par); + mutex_unlock(&info->mm_lock); /* Set new videomode */ ata_set_par(par); diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 5afd64482f5..da05f0801bb 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -261,6 +261,9 @@ static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) /** * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory * @sinfo: the frame buffer to allocate memory for + * + * This function is called only from the atmel_lcdfb_probe() + * so no locking by fb_info->mm_lock around smem_len setting is needed. */ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) { diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h index 7691e73823d..1f39a62f899 100644 --- a/drivers/video/aty/atyfb.h +++ b/drivers/video/aty/atyfb.h @@ -187,6 +187,8 @@ struct atyfb_par { int mtrr_reg; #endif u32 mem_cntl; + struct crtc saved_crtc; + union aty_pll saved_pll; }; /* @@ -217,6 +219,7 @@ struct atyfb_par { #define M64F_XL_DLL 0x00080000 #define M64F_MFB_FORCE_4 0x00100000 #define M64F_HW_TRIPLE 0x00200000 +#define M64F_XL_MEM 0x00400000 /* * Register access */ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 1207c208a30..63d3739d43a 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -66,6 +66,8 @@ #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/backlight.h> +#include <linux/reboot.h> +#include <linux/dmi.h> #include <asm/io.h> #include <linux/uaccess.h> @@ -249,8 +251,6 @@ static int aty_init(struct fb_info *info); static int store_video_par(char *videopar, unsigned char m64_num); #endif -static struct crtc saved_crtc; -static union aty_pll saved_pll; static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc); static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc); @@ -261,6 +261,8 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info); static int read_aty_sense(const struct atyfb_par *par); #endif +static DEFINE_MUTEX(reboot_lock); +static struct fb_info *reboot_info; /* * Interface used by the world @@ -361,8 +363,8 @@ static unsigned long phys_guiregbase[FB_MAX] __devinitdata = { 0, }; #define ATI_CHIP_264GTPRO (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D) #define ATI_CHIP_264LTPRO (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D) -#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4) -#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS) +#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM) +#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS) static struct { u16 pci_id; @@ -539,6 +541,7 @@ static char ram_edo[] __devinitdata = "EDO"; static char ram_sdram[] __devinitdata = "SDRAM (1:1)"; static char ram_sgram[] __devinitdata = "SGRAM (1:1)"; static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)"; +static char ram_wram[] __devinitdata = "WRAM"; static char ram_off[] __devinitdata = "OFF"; #endif /* CONFIG_FB_ATY_CT */ @@ -553,6 +556,10 @@ static char *aty_gx_ram[8] __devinitdata = { #ifdef CONFIG_FB_ATY_CT static char *aty_ct_ram[8] __devinitdata = { ram_off, ram_dram, ram_edo, ram_edo, + ram_sdram, ram_sgram, ram_wram, ram_resv +}; +static char *aty_xl_ram[8] __devinitdata = { + ram_off, ram_dram, ram_edo, ram_edo, ram_sdram, ram_sgram, ram_sdram32, ram_resv }; #endif /* CONFIG_FB_ATY_CT */ @@ -760,6 +767,17 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) #endif /* CONFIG_FB_ATY_GENERIC_LCD */ } +static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp) +{ + u32 line_length = vxres * bpp / 8; + + if (par->ram_type == SGRAM || + (!M64_HAS(XL_MEM) && par->ram_type == WRAM)) + line_length = (line_length + 63) & ~63; + + return line_length; +} + static int aty_var_to_crtc(const struct fb_info *info, const struct fb_var_screeninfo *var, struct crtc *crtc) { @@ -769,13 +787,14 @@ static int aty_var_to_crtc(const struct fb_info *info, u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol; u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync; u32 pix_width, dp_pix_width, dp_chain_mask; + u32 line_length; /* input */ - xres = var->xres; + xres = (var->xres + 7) & ~7; yres = var->yres; - vxres = var->xres_virtual; + vxres = (var->xres_virtual + 7) & ~7; vyres = var->yres_virtual; - xoffset = var->xoffset; + xoffset = (var->xoffset + 7) & ~7; yoffset = var->yoffset; bpp = var->bits_per_pixel; if (bpp == 16) @@ -827,7 +846,9 @@ static int aty_var_to_crtc(const struct fb_info *info, } else FAIL("invalid bpp"); - if (vxres * vyres * bpp / 8 > info->fix.smem_len) + line_length = calc_line_length(par, vxres, bpp); + + if (vyres * line_length > info->fix.smem_len) FAIL("not enough video RAM"); h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; @@ -969,7 +990,9 @@ static int aty_var_to_crtc(const struct fb_info *info, crtc->xoffset = xoffset; crtc->yoffset = yoffset; crtc->bpp = bpp; - crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19); + crtc->off_pitch = + ((yoffset * line_length + xoffset * bpp / 8) / 8) | + ((line_length / bpp) << 22); crtc->vline_crnt_vline = 0; crtc->h_tot_disp = h_total | (h_disp<<16); @@ -1394,7 +1417,9 @@ static int atyfb_set_par(struct fb_info *info) } aty_st_8(DAC_MASK, 0xff, par); - info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8; + info->fix.line_length = calc_line_length(par, var->xres_virtual, + var->bits_per_pixel); + info->fix.visual = var->bits_per_pixel <= 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; @@ -1505,10 +1530,12 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info) { u32 xoffset = info->var.xoffset; u32 yoffset = info->var.yoffset; - u32 vxres = par->crtc.vxres; + u32 line_length = info->fix.line_length; u32 bpp = info->var.bits_per_pixel; - par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19); + par->crtc.off_pitch = + ((yoffset * line_length + xoffset * bpp / 8) / 8) | + ((line_length / bpp) << 22); } @@ -2201,7 +2228,7 @@ static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk) const int *refresh_tbl; int i, size; - if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) { + if (M64_HAS(XL_MEM)) { refresh_tbl = ragexl_tbl; size = ARRAY_SIZE(ragexl_tbl); } else { @@ -2335,7 +2362,10 @@ static int __devinit aty_init(struct fb_info *info) par->pll_ops = &aty_pll_ct; par->bus_type = PCI; par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07); - ramname = aty_ct_ram[par->ram_type]; + if (M64_HAS(XL_MEM)) + ramname = aty_xl_ram[par->ram_type]; + else + ramname = aty_ct_ram[par->ram_type]; /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) par->pll_limits.mclk = 63; @@ -2390,9 +2420,9 @@ static int __devinit aty_init(struct fb_info *info) #endif /* CONFIG_FB_ATY_CT */ /* save previous video mode */ - aty_get_crtc(par, &saved_crtc); + aty_get_crtc(par, &par->saved_crtc); if(par->pll_ops->get_pll) - par->pll_ops->get_pll(info, &saved_pll); + par->pll_ops->get_pll(info, &par->saved_pll); par->mem_cntl = aty_ld_le32(MEM_CNTL, par); gtb_memsize = M64_HAS(GTB_DSP); @@ -2667,8 +2697,8 @@ static int __devinit aty_init(struct fb_info *info) aty_init_exit: /* restore video mode */ - aty_set_crtc(par, &saved_crtc); - par->pll_ops->set_pll(info, &saved_pll); + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(info, &par->saved_pll); #ifdef CONFIG_MTRR if (par->mtrr_reg >= 0) { @@ -3502,6 +3532,11 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi par->mmap_map[1].prot_flag = _PAGE_E; #endif /* __sparc__ */ + mutex_lock(&reboot_lock); + if (!reboot_info) + reboot_info = info; + mutex_unlock(&reboot_lock); + return 0; err_release_io: @@ -3614,8 +3649,8 @@ static void __devexit atyfb_remove(struct fb_info *info) struct atyfb_par *par = (struct atyfb_par *) info->par; /* restore video mode */ - aty_set_crtc(par, &saved_crtc); - par->pll_ops->set_pll(info, &saved_pll); + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(info, &par->saved_pll); unregister_framebuffer(info); @@ -3661,6 +3696,11 @@ static void __devexit atyfb_pci_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); + mutex_lock(&reboot_lock); + if (reboot_info == info) + reboot_info = NULL; + mutex_unlock(&reboot_lock); + atyfb_remove(info); } @@ -3808,6 +3848,56 @@ static int __init atyfb_setup(char *options) } #endif /* MODULE */ +static int atyfb_reboot_notify(struct notifier_block *nb, + unsigned long code, void *unused) +{ + struct atyfb_par *par; + + if (code != SYS_RESTART) + return NOTIFY_DONE; + + mutex_lock(&reboot_lock); + + if (!reboot_info) + goto out; + + if (!lock_fb_info(reboot_info)) + goto out; + + par = reboot_info->par; + + /* + * HP OmniBook 500's BIOS doesn't like the state of the + * hardware after atyfb has been used. Restore the hardware + * to the original state to allow successful reboots. + */ + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(reboot_info, &par->saved_pll); + + unlock_fb_info(reboot_info); + out: + mutex_unlock(&reboot_lock); + + return NOTIFY_DONE; +} + +static struct notifier_block atyfb_reboot_notifier = { + .notifier_call = atyfb_reboot_notify, +}; + +static const struct dmi_system_id atyfb_reboot_ids[] = { + { + .ident = "HP OmniBook 500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"), + }, + }, + + { } +}; + static int __init atyfb_init(void) { int err1 = 1, err2 = 1; @@ -3826,11 +3916,20 @@ static int __init atyfb_init(void) err2 = atyfb_atari_probe(); #endif - return (err1 && err2) ? -ENODEV : 0; + if (err1 && err2) + return -ENODEV; + + if (dmi_check_system(atyfb_reboot_ids)) + register_reboot_notifier(&atyfb_reboot_notifier); + + return 0; } static void __exit atyfb_exit(void) { + if (dmi_check_system(atyfb_reboot_ids)) + unregister_reboot_notifier(&atyfb_reboot_notifier); + #ifdef CONFIG_PCI pci_unregister_driver(&atyfb_driver); #endif diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c index 0cc9724e61a..51fcc0a2c94 100644 --- a/drivers/video/aty/mach64_accel.c +++ b/drivers/video/aty/mach64_accel.c @@ -63,14 +63,17 @@ static void reset_GTC_3D_engine(const struct atyfb_par *par) void aty_init_engine(struct atyfb_par *par, struct fb_info *info) { u32 pitch_value; + u32 vxres; /* determine modal information from global mode structure */ - pitch_value = info->var.xres_virtual; + pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8); + vxres = info->var.xres_virtual; if (info->var.bits_per_pixel == 24) { /* In 24 bpp, the engine is in 8 bpp - this requires that all */ /* horizontal coordinates and widths must be adjusted */ pitch_value *= 3; + vxres *= 3; } /* On GTC (RagePro), we need to reset the 3D engine before */ @@ -133,7 +136,7 @@ void aty_init_engine(struct atyfb_par *par, struct fb_info *info) aty_st_le32(SC_LEFT, 0, par); aty_st_le32(SC_TOP, 0, par); aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par); - aty_st_le32(SC_RIGHT, pitch_value - 1, par); + aty_st_le32(SC_RIGHT, vxres - 1, par); /* set background color to minimum value (usually BLACK) */ aty_st_le32(DP_BKGD_CLR, 0, par); diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c index 1dae7f8f3c6..51422fc4f60 100644 --- a/drivers/video/backlight/tdo24m.c +++ b/drivers/video/backlight/tdo24m.c @@ -356,7 +356,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi) lcd->power = FB_BLANK_POWERDOWN; lcd->mode = MODE_VGA; /* default to VGA */ - lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL)); + lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL); if (lcd->buf == NULL) { kfree(lcd); return -ENOMEM; diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c index 7bad24ed04e..108b89e09a8 100644 --- a/drivers/video/cobalt_lcdfb.c +++ b/drivers/video/cobalt_lcdfb.c @@ -1,7 +1,7 @@ /* * Cobalt server LCD frame buffer driver. * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index f8a09bf8d0c..53ea05645ff 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1310,8 +1310,6 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd, static int fb_mmap(struct file *file, struct vm_area_struct * vma) -__acquires(&info->lock) -__releases(&info->lock) { int fbidx = iminor(file->f_path.dentry->d_inode); struct fb_info *info = registered_fb[fbidx]; @@ -1325,16 +1323,14 @@ __releases(&info->lock) off = vma->vm_pgoff << PAGE_SHIFT; if (!fb) return -ENODEV; + mutex_lock(&info->mm_lock); if (fb->fb_mmap) { int res; - mutex_lock(&info->lock); res = fb->fb_mmap(info, vma); - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); return res; } - mutex_lock(&info->lock); - /* frame buffer memory */ start = info->fix.smem_start; len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len); @@ -1342,13 +1338,13 @@ __releases(&info->lock) /* memory mapped io */ off -= len; if (info->var.accel_flags) { - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); return -EINVAL; } start = info->fix.mmio_start; len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len); } - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); start &= PAGE_MASK; if ((vma->vm_end - vma->vm_start + off) > len) return -EINVAL; @@ -1518,6 +1514,7 @@ register_framebuffer(struct fb_info *fb_info) break; fb_info->node = i; mutex_init(&fb_info->lock); + mutex_init(&fb_info->mm_lock); fb_info->dev = device_create(fb_class, fb_info->device, MKDEV(FB_MAJOR, i), NULL, "fb%d", i); diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index f153c581cbd..72d68b3dc47 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -750,24 +750,26 @@ static void update_lcdc(struct fb_info *info) static int map_video_memory(struct fb_info *info) { phys_addr_t phys; + u32 smem_len = info->fix.line_length * info->var.yres_virtual; pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual); pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual); pr_debug("info->fix.line_length = %d\n", info->fix.line_length); + pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len); - info->fix.smem_len = info->fix.line_length * info->var.yres_virtual; - pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len); - info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys); + info->screen_base = fsl_diu_alloc(smem_len, &phys); if (info->screen_base == NULL) { printk(KERN_ERR "Unable to allocate fb memory\n"); return -ENOMEM; } + mutex_lock(&info->mm_lock); info->fix.smem_start = (unsigned long) phys; + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); info->screen_size = info->fix.smem_len; pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n", - info->fix.smem_start, - info->fix.smem_len); + info->fix.smem_start, info->fix.smem_len); pr_debug("screen base %p\n", info->screen_base); return 0; @@ -776,9 +778,11 @@ static int map_video_memory(struct fb_info *info) static void unmap_video_memory(struct fb_info *info) { fsl_diu_free(info->screen_base, info->fix.smem_len); + mutex_lock(&info->mm_lock); info->screen_base = NULL; info->fix.smem_start = 0; info->fix.smem_len = 0; + mutex_unlock(&info->mm_lock); } /* @@ -1219,12 +1223,6 @@ static int __devinit install_fb(struct fb_info *info) return -EINVAL; } - if (fsl_diu_set_par(info)) { - printk(KERN_ERR "fb_set_par failed"); - fb_dealloc_cmap(&info->cmap); - return -EINVAL; - } - if (register_framebuffer(info) < 0) { printk(KERN_ERR "register_framebuffer failed"); unmap_video_memory(info); diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index 020db7fc915..e7116a6d82d 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -44,9 +44,6 @@ static struct fb_fix_screeninfo hitfb_fix __initdata = { .accel = FB_ACCEL_NONE, }; -static u32 pseudo_palette[16]; -static struct fb_info fb_info; - static inline void hitfb_accel_wait(void) { while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ; @@ -331,6 +328,8 @@ static struct fb_ops hitfb_ops = { static int __init hitfb_probe(struct platform_device *dev) { unsigned short lcdclor, ldr3, ldvndr; + struct fb_info *info; + int ret; if (fb_get_options("hitfb", NULL)) return -ENODEV; @@ -384,32 +383,53 @@ static int __init hitfb_probe(struct platform_device *dev) break; } - fb_info.fbops = &hitfb_ops; - fb_info.var = hitfb_var; - fb_info.fix = hitfb_fix; - fb_info.pseudo_palette = pseudo_palette; - fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | + info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev); + if (unlikely(!info)) + return -ENOMEM; + + info->fbops = &hitfb_ops; + info->var = hitfb_var; + info->fix = hitfb_fix; + info->pseudo_palette = info->par; + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; - fb_info.screen_base = (void *)hitfb_fix.smem_start; + info->screen_base = (void *)hitfb_fix.smem_start; - fb_alloc_cmap(&fb_info.cmap, 256, 0); + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (unlikely(ret < 0)) + goto err_fb; - if (register_framebuffer(&fb_info) < 0) - return -EINVAL; + ret = register_framebuffer(info); + if (unlikely(ret < 0)) + goto err; + + platform_set_drvdata(dev, info); printk(KERN_INFO "fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); + info->node, info->fix.id); + return 0; + +err: + fb_dealloc_cmap(&info->cmap); +err_fb: + framebuffer_release(info); + return ret; } static int __exit hitfb_remove(struct platform_device *dev) { - return unregister_framebuffer(&fb_info); + struct fb_info *info = platform_get_drvdata(dev); + + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); + + return 0; } -#ifdef CONFIG_PM -static int hitfb_suspend(struct platform_device *dev, pm_message_t state) +static int hitfb_suspend(struct device *dev) { u16 v; @@ -421,7 +441,7 @@ static int hitfb_suspend(struct platform_device *dev, pm_message_t state) return 0; } -static int hitfb_resume(struct platform_device *dev) +static int hitfb_resume(struct device *dev) { u16 v; @@ -435,17 +455,19 @@ static int hitfb_resume(struct platform_device *dev) return 0; } -#endif + +static struct dev_pm_ops hitfb_dev_pm_ops = { + .suspend = hitfb_suspend, + .resume = hitfb_resume, +}; static struct platform_driver hitfb_driver = { .probe = hitfb_probe, .remove = __exit_p(hitfb_remove), -#ifdef CONFIG_PM - .suspend = hitfb_suspend, - .resume = hitfb_resume, -#endif .driver = { .name = "hitfb", + .owner = THIS_MODULE, + .pm = &hitfb_dev_pm_ops, }, }; diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 2e940199fc8..5743ea25e81 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -1090,8 +1090,10 @@ static int encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) memset(fix, 0, sizeof(struct fb_fix_screeninfo)); strcpy(fix->id, "I810"); + mutex_lock(&info->mm_lock); fix->smem_start = par->fb.physical; fix->smem_len = par->fb.size; + mutex_unlock(&info->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; fix->type_aux = 0; fix->xpanstep = 8; @@ -2058,8 +2060,7 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev, fb_var_to_videomode(&mode, &info->var); fb_add_videomode(&mode, &info->modelist); - encode_fix(&info->fix, info); - + i810fb_init_ringbuffer(info); err = register_framebuffer(info); diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c index 0ce3b0a8979..a74e5da17aa 100644 --- a/drivers/video/matrox/matroxfb_DAC1064.c +++ b/drivers/video/matrox/matroxfb_DAC1064.c @@ -454,9 +454,9 @@ static void DAC1064_restore_2(WPMINFO2) { dprintk(KERN_DEBUG "DAC1064regs "); for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) { dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]); - if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); + if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... "); } - dprintk("\n" KERN_DEBUG "DAC1064clk "); + dprintk(KERN_DEBUG "DAC1064clk "); for (i = 0; i < 6; i++) dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]); dprintk("\n"); diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c index 13524821e24..4e825112a60 100644 --- a/drivers/video/matrox/matroxfb_Ti3026.c +++ b/drivers/video/matrox/matroxfb_Ti3026.c @@ -651,9 +651,9 @@ static void Ti3026_restore(WPMINFO2) { dprintk(KERN_DEBUG "3026DACregs "); for (i = 0; i < 21; i++) { dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]); - if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); + if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... "); } - dprintk("\n" KERN_DEBUG "DACclk "); + dprintk(KERN_DEBUG "DACclk "); for (i = 0; i < 6; i++) dprintk("C%02X=%02X ", i, hw->DACclk[i]); dprintk("\n"); diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 8e7a275df50..0c1049b308b 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -724,8 +724,10 @@ static void matroxfb_update_fix(WPMINFO2) struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix; DBG(__func__) + mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock); fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes); fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes); + mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock); } static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -1874,7 +1876,6 @@ static int initMatrox2(WPMINFO struct board* b){ } matroxfb_init_fix(PMINFO2); ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase)); - matroxfb_update_fix(PMINFO2); /* Normalize values (namely yres_virtual) */ matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon)); /* And put it into "current" var. Do NOT program hardware yet, or we'll not take over @@ -2081,6 +2082,7 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm spin_lock_init(&ACCESS_FBINFO(lock.accel)); init_rwsem(&ACCESS_FBINFO(crtc2.lock)); init_rwsem(&ACCESS_FBINFO(altout.lock)); + mutex_init(&ACCESS_FBINFO(fbcon).mm_lock); ACCESS_FBINFO(irq_flags) = 0; init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait)); init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait)); diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c index 7ac4c5f6145..ebcb5c6b496 100644 --- a/drivers/video/matrox/matroxfb_crtc2.c +++ b/drivers/video/matrox/matroxfb_crtc2.c @@ -289,7 +289,12 @@ static int matroxfb_dh_release(struct fb_info* info, int user) { #undef m2info } -static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) { +/* + * This function is called before the register_framebuffer so + * no locking is needed. + */ +static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) +{ struct fb_fix_screeninfo *fix = &m2info->fbcon.fix; strcpy(fix->id, "MATROX DH"); diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index b7af5256e88..567fb944bd2 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -669,7 +669,7 @@ static uint32_t bpp_to_pixfmt(int bpp) } static int mx3fb_blank(int blank, struct fb_info *fbi); -static int mx3fb_map_video_memory(struct fb_info *fbi); +static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len); static int mx3fb_unmap_video_memory(struct fb_info *fbi); /** @@ -742,8 +742,7 @@ static int mx3fb_set_par(struct fb_info *fbi) if (fbi->fix.smem_start) mx3fb_unmap_video_memory(fbi); - fbi->fix.smem_len = mem_len; - if (mx3fb_map_video_memory(fbi) < 0) { + if (mx3fb_map_video_memory(fbi, mem_len) < 0) { mutex_unlock(&mx3_fbi->mutex); return -ENOMEM; } @@ -1198,6 +1197,7 @@ static int mx3fb_resume(struct platform_device *pdev) /** * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. * @fbi: framebuffer information pointer + * @mem_len: length of mapped memory * @return: Error code indicating success or failure * * This buffer is remapped into a non-cached, non-buffered, memory region to @@ -1205,23 +1205,26 @@ static int mx3fb_resume(struct platform_device *pdev) * area is remapped, all virtual memory access to the video memory should occur * at the new region. */ -static int mx3fb_map_video_memory(struct fb_info *fbi) +static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len) { int retval = 0; dma_addr_t addr; fbi->screen_base = dma_alloc_writecombine(fbi->device, - fbi->fix.smem_len, + mem_len, &addr, GFP_DMA); if (!fbi->screen_base) { dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", - fbi->fix.smem_len); + mem_len); retval = -EBUSY; goto err0; } + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = addr; + fbi->fix.smem_len = mem_len; + mutex_unlock(&fbi->mm_lock); dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); @@ -1251,8 +1254,10 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi) fbi->screen_base, fbi->fix.smem_start); fbi->screen_base = 0; + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; + mutex_unlock(&fbi->mm_lock); return 0; } diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 060d72fe57c..4ea99bfc37b 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -393,8 +393,10 @@ static void set_fb_fix(struct fb_info *fbi) rg = &plane->fbdev->mem_desc.region[plane->idx]; fbi->screen_base = rg->vaddr; + mutex_lock(&fbi->mm_lock); fix->smem_start = rg->paddr; fix->smem_len = rg->size; + mutex_unlock(&fbi->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; bpp = var->bits_per_pixel; @@ -886,8 +888,10 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) * plane memory is dealloce'd, the other * screen parameters in var / fix are invalid. */ + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; + mutex_unlock(&fbi->mm_lock); } } } diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c index 03b3670130a..bacfabd9ce1 100644 --- a/drivers/video/platinumfb.c +++ b/drivers/video/platinumfb.c @@ -141,7 +141,9 @@ static int platinumfb_set_par (struct fb_info *info) offset = 0x10; info->screen_base = pinfo->frame_buffer + init->fb_offset + offset; + mutex_lock(&info->mm_lock); info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset; + mutex_unlock(&info->mm_lock); info->fix.visual = (pinfo->cmode == CMODE_8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 0889d50c328..6506117c134 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -815,8 +815,10 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb) ofb->video_mem_phys = virt_to_phys(ofb->video_mem); ofb->video_mem_size = size; + mutex_lock(&ofb->fb.mm_lock); ofb->fb.fix.smem_start = ofb->video_mem_phys; ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual; + mutex_unlock(&ofb->fb.mm_lock); ofb->fb.screen_base = ofb->video_mem; return 0; } diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 43680e54542..bb63c07e13d 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -211,23 +211,21 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var, /** * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock. + * @id: window id. * @sfb: The hardware state. * @pixclock: The pixel clock wanted, in picoseconds. * * Given the specified pixel clock, work out the necessary divider to get * close to the output frequency. */ -static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk) +static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk) { + struct s3c_fb_pd_win *win = sfb->pdata->win[id]; unsigned long clk = clk_get_rate(sfb->bus_clk); - unsigned long long tmp; unsigned int result; - tmp = (unsigned long long)clk; - tmp *= pixclk; - - do_div(tmp, 1000000000UL); - result = (unsigned int)tmp / 1000; + pixclk *= win->win_mode.refresh; + result = clk / pixclk; dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n", pixclk, clk, result, clk / result); @@ -267,6 +265,7 @@ static int s3c_fb_set_par(struct fb_info *info) struct s3c_fb *sfb = win->parent; void __iomem *regs = sfb->regs; int win_no = win->index; + u32 osdc_data = 0; u32 data; u32 pagewidth; int clkdiv; @@ -302,7 +301,7 @@ static int s3c_fb_set_par(struct fb_info *info) /* use window 0 as the basis for the lcd output timings */ if (win_no == 0) { - clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock); + clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock); data = sfb->pdata->vidcon0; data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); @@ -359,8 +358,6 @@ static int s3c_fb_set_par(struct fb_info *info) data = var->xres * var->yres; - u32 osdc_data = 0; - osdc_data = VIDISD14C_ALPHA1_R(0xf) | VIDISD14C_ALPHA1_G(0xf) | VIDISD14C_ALPHA1_B(0xf); diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c index 653bdfee305..9f6d6e61f0c 100644 --- a/drivers/video/sh7760fb.c +++ b/drivers/video/sh7760fb.c @@ -120,18 +120,6 @@ static int sh7760_setcolreg (u_int regno, return 0; } -static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info, - unsigned long stride) -{ - memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - strcpy(fix->id, "sh7760-lcdc"); - - fix->smem_start = (unsigned long)info->screen_base; - fix->smem_len = info->screen_size; - - fix->line_length = stride; -} - static int sh7760fb_get_color_info(struct device *dev, u16 lddfr, int *bpp, int *gray) { @@ -334,7 +322,8 @@ static int sh7760fb_set_par(struct fb_info *info) iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */ - encode_fix(&info->fix, info, stride); + info->fix.line_length = stride; + sh7760fb_check_var(&info->var, info); sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */ @@ -435,6 +424,8 @@ static int sh7760fb_alloc_mem(struct fb_info *info) info->screen_base = fbmem; info->screen_size = vram; + info->fix.smem_start = (unsigned long)info->screen_base; + info->fix.smem_len = info->screen_size; return 0; } @@ -520,6 +511,8 @@ static int __devinit sh7760fb_probe(struct platform_device *pdev) info->var.transp.length = 0; info->var.transp.msb_right = 0; + strcpy(info->fix.id, "sh7760-lcdc"); + /* set the DON2 bit now, before cmap allocation, as it will randomize * palette memory. */ diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index f10d2fbeda0..8f24564f77b 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> +#include <linux/vmalloc.h> #include <video/sh_mobile_lcdc.h> #include <asm/atomic.h> @@ -30,9 +31,10 @@ struct sh_mobile_lcdc_chan { unsigned long enabled; /* ME and SE in LDCNT2R */ struct sh_mobile_lcdc_chan_cfg cfg; u32 pseudo_palette[PALETTE_NR]; - struct fb_info info; + struct fb_info *info; dma_addr_t dma_handle; struct fb_deferred_io defio; + struct scatterlist *sglist; unsigned long frame_end; wait_queue_head_t frame_end_wait; }; @@ -206,16 +208,38 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {} static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {} #endif +static int sh_mobile_lcdc_sginit(struct fb_info *info, + struct list_head *pagelist) +{ + struct sh_mobile_lcdc_chan *ch = info->par; + unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT; + struct page *page; + int nr_pages = 0; + + sg_init_table(ch->sglist, nr_pages_max); + + list_for_each_entry(page, pagelist, lru) + sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0); + + return nr_pages; +} + static void sh_mobile_lcdc_deferred_io(struct fb_info *info, struct list_head *pagelist) { struct sh_mobile_lcdc_chan *ch = info->par; + unsigned int nr_pages; /* enable clocks before accessing hardware */ sh_mobile_lcdc_clk_on(ch->lcdc); + nr_pages = sh_mobile_lcdc_sginit(info, pagelist); + dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + /* trigger panel update */ lcdc_write_chan(ch, LDSM2R, 1); + + dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); } static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info) @@ -418,22 +442,22 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* set bpp format in PKF[4:0] */ tmp = lcdc_read_chan(ch, LDDFR); tmp &= ~(0x0001001f); - tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0; + tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0; lcdc_write_chan(ch, LDDFR, tmp); /* point out our frame buffer */ - lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start); + lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start); /* set line size */ - lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length); + lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length); /* setup deferred io if SYS bus */ tmp = ch->cfg.sys_bus_cfg.deferred_io_msec; if (ch->ldmt1r_value & (1 << 12) && tmp) { ch->defio.deferred_io = sh_mobile_lcdc_deferred_io; ch->defio.delay = msecs_to_jiffies(tmp); - ch->info.fbdefio = &ch->defio; - fb_deferred_io_init(&ch->info); + ch->info->fbdefio = &ch->defio; + fb_deferred_io_init(ch->info); /* one-shot mode */ lcdc_write_chan(ch, LDSM1R, 1); @@ -479,12 +503,12 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) * flush frame, and wait for frame end interrupt * clean up deferred io and enable clock */ - if (ch->info.fbdefio) { + if (ch->info->fbdefio) { ch->frame_end = 0; - schedule_delayed_work(&ch->info.deferred_work, 0); + schedule_delayed_work(&ch->info->deferred_work, 0); wait_event(ch->frame_end_wait, ch->frame_end); - fb_deferred_io_cleanup(&ch->info); - ch->info.fbdefio = NULL; + fb_deferred_io_cleanup(ch->info); + ch->info->fbdefio = NULL; sh_mobile_lcdc_clk_on(priv); } @@ -793,9 +817,16 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1); for (i = 0; i < j; i++) { - info = &priv->ch[i].info; cfg = &priv->ch[i].cfg; + priv->ch[i].info = framebuffer_alloc(0, &pdev->dev); + if (!priv->ch[i].info) { + dev_err(&pdev->dev, "unable to allocate fb_info\n"); + error = -ENOMEM; + break; + } + + info = priv->ch[i].info; info->fbops = &sh_mobile_lcdc_ops; info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres; info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres; @@ -846,21 +877,31 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) } for (i = 0; i < j; i++) { - error = register_framebuffer(&priv->ch[i].info); + struct sh_mobile_lcdc_chan *ch = priv->ch + i; + + info = ch->info; + + if (info->fbdefio) { + priv->ch->sglist = vmalloc(sizeof(struct scatterlist) * + info->fix.smem_len >> PAGE_SHIFT); + if (!priv->ch->sglist) { + dev_err(&pdev->dev, "cannot allocate sglist\n"); + goto err1; + } + } + + error = register_framebuffer(info); if (error < 0) goto err1; - } - for (i = 0; i < j; i++) { - info = &priv->ch[i].info; dev_info(info->dev, "registered %s/%s as %dx%d %dbpp.\n", pdev->name, - (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ? + (ch->cfg.chan == LCDC_CHAN_MAINLCD) ? "mainlcd" : "sublcd", - (int) priv->ch[i].cfg.lcd_cfg.xres, - (int) priv->ch[i].cfg.lcd_cfg.yres, - priv->ch[i].cfg.bpp); + (int) ch->cfg.lcd_cfg.xres, + (int) ch->cfg.lcd_cfg.yres, + ch->cfg.bpp); /* deferred io mode: disable clock to save power */ if (info->fbdefio) @@ -881,20 +922,24 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) int i; for (i = 0; i < ARRAY_SIZE(priv->ch); i++) - if (priv->ch[i].info.dev) - unregister_framebuffer(&priv->ch[i].info); + if (priv->ch[i].info->dev) + unregister_framebuffer(priv->ch[i].info); sh_mobile_lcdc_stop(priv); for (i = 0; i < ARRAY_SIZE(priv->ch); i++) { - info = &priv->ch[i].info; + info = priv->ch[i].info; - if (!info->device) + if (!info || !info->device) continue; + if (priv->ch[i].sglist) + vfree(priv->ch[i].sglist); + dma_free_coherent(&pdev->dev, info->fix.smem_len, info->screen_base, priv->ch[i].dma_handle); fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); } #ifdef CONFIG_HAVE_CLK diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 7072d19080d..4a067f0d0ce 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -1847,8 +1847,10 @@ sisfb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info) strcpy(fix->id, ivideo->myid); + mutex_lock(&info->mm_lock); fix->smem_start = ivideo->video_base + ivideo->video_offset; fix->smem_len = ivideo->sisfb_mem; + mutex_unlock(&info->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; fix->type_aux = 0; fix->visual = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; @@ -6365,7 +6367,6 @@ error_3: vfree(ivideo->bios_abase); sis_fb_info->fix = ivideo->sisfb_fix; sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset; sis_fb_info->fbops = &sisfb_ops; - sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info); sis_fb_info->pseudo_palette = ivideo->pseudo_palette; fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0); diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index eb5d73a0670..16d4f4c7d52 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -145,7 +145,7 @@ static inline void sm501fb_sync_regs(struct sm501fb_info *info) #define SM501_MEMF_ACCEL (8) static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, - unsigned int why, size_t size) + unsigned int why, size_t size, u32 smem_len) { struct sm501fb_par *par; struct fb_info *fbi; @@ -172,7 +172,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, if (ptr > 0) ptr &= ~(PAGE_SIZE - 1); - if (fbi && ptr < fbi->fix.smem_len) + if (fbi && ptr < smem_len) return -ENOMEM; break; @@ -197,7 +197,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, case SM501_MEMF_ACCEL: fbi = inf->fb[HEAD_CRT]; - ptr = fbi ? fbi->fix.smem_len : 0; + ptr = fbi ? smem_len : 0; fbi = inf->fb[HEAD_PANEL]; if (fbi) { @@ -413,6 +413,7 @@ static int sm501fb_set_par_common(struct fb_info *info, unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; + unsigned int smem_len; dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n", __func__, var->xres, var->yres, var->bits_per_pixel, @@ -453,18 +454,20 @@ static int sm501fb_set_par_common(struct fb_info *info, /* allocate fb memory within 501 */ info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8; - info->fix.smem_len = info->fix.line_length * var->yres_virtual; + smem_len = info->fix.line_length * var->yres_virtual; dev_dbg(fbi->dev, "%s: line length = %u\n", __func__, info->fix.line_length); - if (sm501_alloc_mem(fbi, &par->screen, mem_type, - info->fix.smem_len)) { + if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) { dev_err(fbi->dev, "no memory available\n"); return -ENOMEM; } + mutex_lock(&info->mm_lock); info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr; + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); info->screen_base = fbi->fbmem + par->screen.sm_addr; info->screen_size = info->fix.smem_len; @@ -637,7 +640,8 @@ static int sm501fb_set_par_crt(struct fb_info *info) if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) { /* the head is displaying panel data... */ - sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0); + sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0, + info->fix.smem_len); goto out_update; } @@ -1289,7 +1293,8 @@ static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base) par->cursor_regs = info->regs + reg_base; - ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024); + ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024, + fbi->fix.smem_len); if (ret < 0) return ret; @@ -1619,6 +1624,8 @@ static int __devinit sm501fb_start_one(struct sm501fb_info *info, if (!fbi) return 0; + mutex_init(&info->fb[head]->mm_lock); + ret = sm501fb_init_fb(info->fb[head], head, drvname); if (ret) { dev_err(info->dev, "cannot initialise fb %s\n", drvname); diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index eec9dcb7f59..6120f0c526f 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -1115,10 +1115,9 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) if the device name contains the string "DX" and tell the user how to reconfigure the card. */ if (strstr(sti->outptr.dev_name, "DX")) { - printk(KERN_WARNING "WARNING: stifb framebuffer driver does not " - "support '%s' in double-buffer mode.\n" - KERN_WARNING "WARNING: Please disable the double-buffer mode " - "in IPL menu (the PARISC-BIOS).\n", + printk(KERN_WARNING +"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n" +"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n", sti->outptr.dev_name); goto out_err0; } diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index d0674f1e3f1..2376f688ec8 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -523,6 +523,7 @@ static int w100fb_set_par(struct fb_info *info) info->fix.ywrapstep = 0; info->fix.line_length = par->xres * BITS_PER_PIXEL / 8; + mutex_lock(&info->mm_lock); if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) { par->extmem_active = 1; info->fix.smem_len = par->mach->mem->size+1; @@ -530,6 +531,7 @@ static int w100fb_set_par(struct fb_info *info) par->extmem_active = 0; info->fix.smem_len = MEM_INT_SIZE+1; } + mutex_unlock(&info->mm_lock); w100fb_activate_var(par); } @@ -746,8 +748,6 @@ int __init w100fb_probe(struct platform_device *pdev) goto out; } - w100fb_set_par(info); - if (register_framebuffer(info) < 0) { err = -EINVAL; goto out; diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig index f6542211db4..a9efb162532 100644 --- a/drivers/vlynq/Kconfig +++ b/drivers/vlynq/Kconfig @@ -13,7 +13,7 @@ config VLYNQ config VLYNQ_DEBUG bool "VLYNQ bus debug" - depends on VLYNQ && KERNEL_DEBUG + depends on VLYNQ && DEBUG_KERNEL help Turn on VLYNQ bus debugging. diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c index 7335433b067..f05d2a36836 100644 --- a/drivers/vlynq/vlynq.c +++ b/drivers/vlynq/vlynq.c @@ -76,7 +76,7 @@ struct vlynq_regs { u32 int_device[8]; }; -#ifdef VLYNQ_DEBUG +#ifdef CONFIG_VLYNQ_DEBUG static void vlynq_dump_regs(struct vlynq_device *dev) { int i; diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index a4fe7a38d9b..3bde56bce63 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -218,16 +218,14 @@ static void wdrtas_timer_keepalive(void) */ static int wdrtas_get_temperature(void) { - long result; + int result; int temperature = 0; - result = rtas_call(wdrtas_token_get_sensor_state, 2, 2, - (void *)__pa(&temperature), - WDRTAS_THERMAL_SENSOR, 0); + result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature); if (result < 0) printk(KERN_WARNING "wdrtas: reading the thermal sensor " - "faild: %li\n", result); + "failed: %i\n", result); else temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */ diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 891d2e90753..abad71b1632 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -927,9 +927,9 @@ static struct irq_chip xen_dynamic_chip __read_mostly = { void __init xen_init_IRQ(void) { int i; - size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s); - cpu_evtchn_mask_p = alloc_bootmem(size); + cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s), + GFP_KERNEL); BUG_ON(cpu_evtchn_mask_p == NULL); init_evtchn_cpu_bindings(); diff --git a/fs/afs/flock.c b/fs/afs/flock.c index 210acafe4a9..3ff8bdd18fb 100644 --- a/fs/afs/flock.c +++ b/fs/afs/flock.c @@ -432,7 +432,6 @@ vfs_rejected_lock: list_del_init(&fl->fl_u.afs.link); if (list_empty(&vnode->granted_locks)) afs_defer_unlock(vnode, key); - spin_unlock(&vnode->lock); goto abort_attempt; } diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c index c52be53f694..5ffb570cd3a 100644 --- a/fs/afs/mntpt.c +++ b/fs/afs/mntpt.c @@ -17,7 +17,6 @@ #include <linux/pagemap.h> #include <linux/mount.h> #include <linux/namei.h> -#include <linux/mnt_namespace.h> #include "internal.h" @@ -485,6 +485,8 @@ static inline void really_put_req(struct kioctx *ctx, struct kiocb *req) { assert_spin_locked(&ctx->ctx_lock); + if (req->ki_eventfd != NULL) + eventfd_ctx_put(req->ki_eventfd); if (req->ki_dtor) req->ki_dtor(req); if (req->ki_iovec != &req->ki_inline_vec) @@ -509,8 +511,6 @@ static void aio_fput_routine(struct work_struct *data) /* Complete the fput(s) */ if (req->ki_filp != NULL) __fput(req->ki_filp); - if (req->ki_eventfd != NULL) - __fput(req->ki_eventfd); /* Link the iocb into the context's free list */ spin_lock_irq(&ctx->ctx_lock); @@ -528,8 +528,6 @@ static void aio_fput_routine(struct work_struct *data) */ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req) { - int schedule_putreq = 0; - dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n", req, atomic_long_read(&req->ki_filp->f_count)); @@ -549,24 +547,16 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req) * we would not be holding the last reference to the file*, so * this function will be executed w/out any aio kthread wakeup. */ - if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) - schedule_putreq++; - else - req->ki_filp = NULL; - if (req->ki_eventfd != NULL) { - if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count))) - schedule_putreq++; - else - req->ki_eventfd = NULL; - } - if (unlikely(schedule_putreq)) { + if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) { get_ioctx(ctx); spin_lock(&fput_lock); list_add(&req->ki_list, &fput_head); spin_unlock(&fput_lock); queue_work(aio_wq, &fput_work); - } else + } else { + req->ki_filp = NULL; really_put_req(ctx, req); + } return 1; } @@ -1622,7 +1612,7 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, * an eventfd() fd, and will be signaled for each completed * event using the eventfd_signal() function. */ - req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd); + req->ki_eventfd = eventfd_ctx_fdget((int) iocb->aio_resfd); if (IS_ERR(req->ki_eventfd)) { ret = PTR_ERR(req->ki_eventfd); req->ki_eventfd = NULL; diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 9fa212b014a..b7c1603cd4b 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1522,11 +1522,11 @@ static int fill_note_info(struct elfhdr *elf, int phdrs, info->thread = NULL; psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL); - fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo); - if (psinfo == NULL) return 0; + fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo); + /* * Figure out how many notes we're going to need for each thread. */ @@ -1929,7 +1929,10 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file, un elf = kmalloc(sizeof(*elf), GFP_KERNEL); if (!elf) goto out; - + /* + * The number of segs are recored into ELF header as 16bit value. + * Please check DEFAULT_MAX_MAP_COUNT definition when you modify here. + */ segs = current->mm->map_count; #ifdef ELF_CORE_EXTRA_PHDRS segs += ELF_CORE_EXTRA_PHDRS; diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 31c46a241ba..49a34e7f730 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -1,7 +1,7 @@ /* * bio-integrity.c - bio data integrity extensions * - * Copyright (C) 2007, 2008 Oracle Corporation + * Copyright (C) 2007, 2008, 2009 Oracle Corporation * Written by: Martin K. Petersen <martin.petersen@oracle.com> * * This program is free software; you can redistribute it and/or @@ -25,63 +25,121 @@ #include <linux/bio.h> #include <linux/workqueue.h> -static struct kmem_cache *bio_integrity_slab __read_mostly; -static mempool_t *bio_integrity_pool; -static struct bio_set *integrity_bio_set; +struct integrity_slab { + struct kmem_cache *slab; + unsigned short nr_vecs; + char name[8]; +}; + +#define IS(x) { .nr_vecs = x, .name = "bip-"__stringify(x) } +struct integrity_slab bip_slab[BIOVEC_NR_POOLS] __read_mostly = { + IS(1), IS(4), IS(16), IS(64), IS(128), IS(BIO_MAX_PAGES), +}; +#undef IS + static struct workqueue_struct *kintegrityd_wq; +static inline unsigned int vecs_to_idx(unsigned int nr) +{ + switch (nr) { + case 1: + return 0; + case 2 ... 4: + return 1; + case 5 ... 16: + return 2; + case 17 ... 64: + return 3; + case 65 ... 128: + return 4; + case 129 ... BIO_MAX_PAGES: + return 5; + default: + BUG(); + } +} + +static inline int use_bip_pool(unsigned int idx) +{ + if (idx == BIOVEC_NR_POOLS) + return 1; + + return 0; +} + /** - * bio_integrity_alloc - Allocate integrity payload and attach it to bio + * bio_integrity_alloc_bioset - Allocate integrity payload and attach it to bio * @bio: bio to attach integrity metadata to * @gfp_mask: Memory allocation mask * @nr_vecs: Number of integrity metadata scatter-gather elements + * @bs: bio_set to allocate from * * Description: This function prepares a bio for attaching integrity * metadata. nr_vecs specifies the maximum number of pages containing * integrity metadata that can be attached. */ -struct bio_integrity_payload *bio_integrity_alloc(struct bio *bio, - gfp_t gfp_mask, - unsigned int nr_vecs) +struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio, + gfp_t gfp_mask, + unsigned int nr_vecs, + struct bio_set *bs) { struct bio_integrity_payload *bip; - struct bio_vec *iv; - unsigned long idx; + unsigned int idx = vecs_to_idx(nr_vecs); BUG_ON(bio == NULL); + bip = NULL; - bip = mempool_alloc(bio_integrity_pool, gfp_mask); - if (unlikely(bip == NULL)) { - printk(KERN_ERR "%s: could not alloc bip\n", __func__); - return NULL; - } + /* Lower order allocations come straight from slab */ + if (!use_bip_pool(idx)) + bip = kmem_cache_alloc(bip_slab[idx].slab, gfp_mask); - memset(bip, 0, sizeof(*bip)); + /* Use mempool if lower order alloc failed or max vecs were requested */ + if (bip == NULL) { + bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask); - iv = bvec_alloc_bs(gfp_mask, nr_vecs, &idx, integrity_bio_set); - if (unlikely(iv == NULL)) { - printk(KERN_ERR "%s: could not alloc bip_vec\n", __func__); - mempool_free(bip, bio_integrity_pool); - return NULL; + if (unlikely(bip == NULL)) { + printk(KERN_ERR "%s: could not alloc bip\n", __func__); + return NULL; + } } - bip->bip_pool = idx; - bip->bip_vec = iv; + memset(bip, 0, sizeof(*bip)); + + bip->bip_slab = idx; bip->bip_bio = bio; bio->bi_integrity = bip; return bip; } +EXPORT_SYMBOL(bio_integrity_alloc_bioset); + +/** + * bio_integrity_alloc - Allocate integrity payload and attach it to bio + * @bio: bio to attach integrity metadata to + * @gfp_mask: Memory allocation mask + * @nr_vecs: Number of integrity metadata scatter-gather elements + * + * Description: This function prepares a bio for attaching integrity + * metadata. nr_vecs specifies the maximum number of pages containing + * integrity metadata that can be attached. + */ +struct bio_integrity_payload *bio_integrity_alloc(struct bio *bio, + gfp_t gfp_mask, + unsigned int nr_vecs) +{ + return bio_integrity_alloc_bioset(bio, gfp_mask, nr_vecs, fs_bio_set); +} EXPORT_SYMBOL(bio_integrity_alloc); /** * bio_integrity_free - Free bio integrity payload * @bio: bio containing bip to be freed + * @bs: bio_set this bio was allocated from * * Description: Used to free the integrity portion of a bio. Usually * called from bio_free(). */ -void bio_integrity_free(struct bio *bio) +void bio_integrity_free(struct bio *bio, struct bio_set *bs) { struct bio_integrity_payload *bip = bio->bi_integrity; @@ -92,8 +150,10 @@ void bio_integrity_free(struct bio *bio) && bip->bip_buf != NULL) kfree(bip->bip_buf); - bvec_free_bs(integrity_bio_set, bip->bip_vec, bip->bip_pool); - mempool_free(bip, bio_integrity_pool); + if (use_bip_pool(bip->bip_slab)) + mempool_free(bip, bs->bio_integrity_pool); + else + kmem_cache_free(bip_slab[bip->bip_slab].slab, bip); bio->bi_integrity = NULL; } @@ -114,7 +174,7 @@ int bio_integrity_add_page(struct bio *bio, struct page *page, struct bio_integrity_payload *bip = bio->bi_integrity; struct bio_vec *iv; - if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_pool)) { + if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) { printk(KERN_ERR "%s: bip_vec full\n", __func__); return 0; } @@ -647,8 +707,8 @@ void bio_integrity_split(struct bio *bio, struct bio_pair *bp, int sectors) bp->iv1 = bip->bip_vec[0]; bp->iv2 = bip->bip_vec[0]; - bp->bip1.bip_vec = &bp->iv1; - bp->bip2.bip_vec = &bp->iv2; + bp->bip1.bip_vec[0] = bp->iv1; + bp->bip2.bip_vec[0] = bp->iv2; bp->iv1.bv_len = sectors * bi->tuple_size; bp->iv2.bv_offset += sectors * bi->tuple_size; @@ -667,17 +727,19 @@ EXPORT_SYMBOL(bio_integrity_split); * @bio: New bio * @bio_src: Original bio * @gfp_mask: Memory allocation mask + * @bs: bio_set to allocate bip from * * Description: Called to allocate a bip when cloning a bio */ -int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask) +int bio_integrity_clone(struct bio *bio, struct bio *bio_src, + gfp_t gfp_mask, struct bio_set *bs) { struct bio_integrity_payload *bip_src = bio_src->bi_integrity; struct bio_integrity_payload *bip; BUG_ON(bip_src == NULL); - bip = bio_integrity_alloc(bio, gfp_mask, bip_src->bip_vcnt); + bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs); if (bip == NULL) return -EIO; @@ -693,25 +755,43 @@ int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask) } EXPORT_SYMBOL(bio_integrity_clone); -static int __init bio_integrity_init(void) +int bioset_integrity_create(struct bio_set *bs, int pool_size) { - kintegrityd_wq = create_workqueue("kintegrityd"); + unsigned int max_slab = vecs_to_idx(BIO_MAX_PAGES); + + bs->bio_integrity_pool = + mempool_create_slab_pool(pool_size, bip_slab[max_slab].slab); + if (!bs->bio_integrity_pool) + return -1; + + return 0; +} +EXPORT_SYMBOL(bioset_integrity_create); + +void bioset_integrity_free(struct bio_set *bs) +{ + if (bs->bio_integrity_pool) + mempool_destroy(bs->bio_integrity_pool); +} +EXPORT_SYMBOL(bioset_integrity_free); + +void __init bio_integrity_init(void) +{ + unsigned int i; + + kintegrityd_wq = create_workqueue("kintegrityd"); if (!kintegrityd_wq) panic("Failed to create kintegrityd\n"); - bio_integrity_slab = KMEM_CACHE(bio_integrity_payload, - SLAB_HWCACHE_ALIGN|SLAB_PANIC); + for (i = 0 ; i < BIOVEC_NR_POOLS ; i++) { + unsigned int size; - bio_integrity_pool = mempool_create_slab_pool(BIO_POOL_SIZE, - bio_integrity_slab); - if (!bio_integrity_pool) - panic("bio_integrity: can't allocate bip pool\n"); + size = sizeof(struct bio_integrity_payload) + + bip_slab[i].nr_vecs * sizeof(struct bio_vec); - integrity_bio_set = bioset_create(BIO_POOL_SIZE, 0); - if (!integrity_bio_set) - panic("bio_integrity: can't allocate bio_set\n"); - - return 0; + bip_slab[i].slab = + kmem_cache_create(bip_slab[i].name, size, 0, + SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL); + } } -subsys_initcall(bio_integrity_init); @@ -238,7 +238,7 @@ void bio_free(struct bio *bio, struct bio_set *bs) bvec_free_bs(bs, bio->bi_io_vec, BIO_POOL_IDX(bio)); if (bio_integrity(bio)) - bio_integrity_free(bio); + bio_integrity_free(bio, bs); /* * If we have front padding, adjust the bio pointer before freeing @@ -341,7 +341,7 @@ struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) static void bio_kmalloc_destructor(struct bio *bio) { if (bio_integrity(bio)) - bio_integrity_free(bio); + bio_integrity_free(bio, fs_bio_set); kfree(bio); } @@ -472,7 +472,7 @@ struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask) if (bio_integrity(bio)) { int ret; - ret = bio_integrity_clone(b, bio, gfp_mask); + ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set); if (ret < 0) { bio_put(b); @@ -1539,6 +1539,7 @@ void bioset_free(struct bio_set *bs) if (bs->bio_pool) mempool_destroy(bs->bio_pool); + bioset_integrity_free(bs); biovec_free_pools(bs); bio_put_slab(bs); @@ -1579,6 +1580,9 @@ struct bio_set *bioset_create(unsigned int pool_size, unsigned int front_pad) if (!bs->bio_pool) goto bad; + if (bioset_integrity_create(bs, pool_size)) + goto bad; + if (!biovec_create_pools(bs, pool_size)) return bs; @@ -1616,6 +1620,7 @@ static int __init init_bio(void) if (!bio_slabs) panic("bio: can't allocate bios\n"); + bio_integrity_init(); biovec_init_slabs(); fs_bio_set = bioset_create(BIO_POOL_SIZE, 0); diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 7f88628a1a7..6e4f6c50a12 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -299,8 +299,8 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers) "btrfs-%s-%d", workers->name, workers->num_workers + i); if (IS_ERR(worker->task)) { - kfree(worker); ret = PTR_ERR(worker->task); + kfree(worker); goto fail; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2779c2f5360..98a87383871 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2074,8 +2074,7 @@ static inline int btrfs_insert_empty_item(struct btrfs_trans_handle *trans, int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path); int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path); int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf); -int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root - *root); +int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref); int btrfs_drop_subtree(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *node, diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index edc7d208c5c..a5aca3997d4 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -990,15 +990,13 @@ static inline int extent_ref_type(u64 parent, u64 owner) return type; } -static int find_next_key(struct btrfs_path *path, struct btrfs_key *key) +static int find_next_key(struct btrfs_path *path, int level, + struct btrfs_key *key) { - int level; - BUG_ON(!path->keep_locks); - for (level = 0; level < BTRFS_MAX_LEVEL; level++) { + for (; level < BTRFS_MAX_LEVEL; level++) { if (!path->nodes[level]) break; - btrfs_assert_tree_locked(path->nodes[level]); if (path->slots[level] + 1 >= btrfs_header_nritems(path->nodes[level])) continue; @@ -1158,7 +1156,8 @@ int lookup_inline_extent_backref(struct btrfs_trans_handle *trans, * For simplicity, we just do not add new inline back * ref if there is any kind of item for this block */ - if (find_next_key(path, &key) == 0 && key.objectid == bytenr && + if (find_next_key(path, 0, &key) == 0 && + key.objectid == bytenr && key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) { err = -EAGAIN; goto out; @@ -2697,7 +2696,7 @@ again: printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes" ", %llu bytes_used, %llu bytes_reserved, " - "%llu bytes_pinned, %llu bytes_readonly, %llu may use" + "%llu bytes_pinned, %llu bytes_readonly, %llu may use " "%llu total\n", (unsigned long long)bytes, (unsigned long long)data_sinfo->bytes_delalloc, (unsigned long long)data_sinfo->bytes_used, @@ -4128,6 +4127,7 @@ struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans, return buf; } +#if 0 int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *leaf) { @@ -4171,8 +4171,6 @@ int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans, return 0; } -#if 0 - static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_leaf_ref *ref) @@ -4553,262 +4551,471 @@ out: } #endif +struct walk_control { + u64 refs[BTRFS_MAX_LEVEL]; + u64 flags[BTRFS_MAX_LEVEL]; + struct btrfs_key update_progress; + int stage; + int level; + int shared_level; + int update_ref; + int keep_locks; +}; + +#define DROP_REFERENCE 1 +#define UPDATE_BACKREF 2 + /* - * helper function for drop_subtree, this function is similar to - * walk_down_tree. The main difference is that it checks reference - * counts while tree blocks are locked. + * hepler to process tree block while walking down the tree. + * + * when wc->stage == DROP_REFERENCE, this function checks + * reference count of the block. if the block is shared and + * we need update back refs for the subtree rooted at the + * block, this function changes wc->stage to UPDATE_BACKREF + * + * when wc->stage == UPDATE_BACKREF, this function updates + * back refs for pointers in the block. + * + * NOTE: return value 1 means we should stop walking down. */ -static noinline int walk_down_tree(struct btrfs_trans_handle *trans, +static noinline int walk_down_proc(struct btrfs_trans_handle *trans, struct btrfs_root *root, - struct btrfs_path *path, int *level) + struct btrfs_path *path, + struct walk_control *wc) { - struct extent_buffer *next; - struct extent_buffer *cur; - struct extent_buffer *parent; - u64 bytenr; - u64 ptr_gen; - u64 refs; - u64 flags; - u32 blocksize; + int level = wc->level; + struct extent_buffer *eb = path->nodes[level]; + struct btrfs_key key; + u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF; int ret; - cur = path->nodes[*level]; - ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len, - &refs, &flags); - BUG_ON(ret); - if (refs > 1) - goto out; + if (wc->stage == UPDATE_BACKREF && + btrfs_header_owner(eb) != root->root_key.objectid) + return 1; - BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)); + /* + * when reference count of tree block is 1, it won't increase + * again. once full backref flag is set, we never clear it. + */ + if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) || + (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) { + BUG_ON(!path->locks[level]); + ret = btrfs_lookup_extent_info(trans, root, + eb->start, eb->len, + &wc->refs[level], + &wc->flags[level]); + BUG_ON(ret); + BUG_ON(wc->refs[level] == 0); + } - while (*level >= 0) { - cur = path->nodes[*level]; - if (*level == 0) { - ret = btrfs_drop_leaf_ref(trans, root, cur); - BUG_ON(ret); - clean_tree_block(trans, root, cur); - break; - } - if (path->slots[*level] >= btrfs_header_nritems(cur)) { - clean_tree_block(trans, root, cur); - break; + if (wc->stage == DROP_REFERENCE && + wc->update_ref && wc->refs[level] > 1) { + BUG_ON(eb == root->node); + BUG_ON(path->slots[level] > 0); + if (level == 0) + btrfs_item_key_to_cpu(eb, &key, path->slots[level]); + else + btrfs_node_key_to_cpu(eb, &key, path->slots[level]); + if (btrfs_header_owner(eb) == root->root_key.objectid && + btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) { + wc->stage = UPDATE_BACKREF; + wc->shared_level = level; } + } - bytenr = btrfs_node_blockptr(cur, path->slots[*level]); - blocksize = btrfs_level_size(root, *level - 1); - ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]); + if (wc->stage == DROP_REFERENCE) { + if (wc->refs[level] > 1) + return 1; - next = read_tree_block(root, bytenr, blocksize, ptr_gen); - btrfs_tree_lock(next); - btrfs_set_lock_blocking(next); + if (path->locks[level] && !wc->keep_locks) { + btrfs_tree_unlock(eb); + path->locks[level] = 0; + } + return 0; + } - ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize, - &refs, &flags); + /* wc->stage == UPDATE_BACKREF */ + if (!(wc->flags[level] & flag)) { + BUG_ON(!path->locks[level]); + ret = btrfs_inc_ref(trans, root, eb, 1); BUG_ON(ret); - if (refs > 1) { - parent = path->nodes[*level]; - ret = btrfs_free_extent(trans, root, bytenr, - blocksize, parent->start, - btrfs_header_owner(parent), - *level - 1, 0); + ret = btrfs_dec_ref(trans, root, eb, 0); + BUG_ON(ret); + ret = btrfs_set_disk_extent_flags(trans, root, eb->start, + eb->len, flag, 0); + BUG_ON(ret); + wc->flags[level] |= flag; + } + + /* + * the block is shared by multiple trees, so it's not good to + * keep the tree lock + */ + if (path->locks[level] && level > 0) { + btrfs_tree_unlock(eb); + path->locks[level] = 0; + } + return 0; +} + +/* + * hepler to process tree block while walking up the tree. + * + * when wc->stage == DROP_REFERENCE, this function drops + * reference count on the block. + * + * when wc->stage == UPDATE_BACKREF, this function changes + * wc->stage back to DROP_REFERENCE if we changed wc->stage + * to UPDATE_BACKREF previously while processing the block. + * + * NOTE: return value 1 means we should stop walking up. + */ +static noinline int walk_up_proc(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct walk_control *wc) +{ + int ret = 0; + int level = wc->level; + struct extent_buffer *eb = path->nodes[level]; + u64 parent = 0; + + if (wc->stage == UPDATE_BACKREF) { + BUG_ON(wc->shared_level < level); + if (level < wc->shared_level) + goto out; + + BUG_ON(wc->refs[level] <= 1); + ret = find_next_key(path, level + 1, &wc->update_progress); + if (ret > 0) + wc->update_ref = 0; + + wc->stage = DROP_REFERENCE; + wc->shared_level = -1; + path->slots[level] = 0; + + /* + * check reference count again if the block isn't locked. + * we should start walking down the tree again if reference + * count is one. + */ + if (!path->locks[level]) { + BUG_ON(level == 0); + btrfs_tree_lock(eb); + btrfs_set_lock_blocking(eb); + path->locks[level] = 1; + + ret = btrfs_lookup_extent_info(trans, root, + eb->start, eb->len, + &wc->refs[level], + &wc->flags[level]); BUG_ON(ret); - path->slots[*level]++; - btrfs_tree_unlock(next); - free_extent_buffer(next); - continue; + BUG_ON(wc->refs[level] == 0); + if (wc->refs[level] == 1) { + btrfs_tree_unlock(eb); + path->locks[level] = 0; + return 1; + } + } else { + BUG_ON(level != 0); } + } - BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)); + /* wc->stage == DROP_REFERENCE */ + BUG_ON(wc->refs[level] > 1 && !path->locks[level]); - *level = btrfs_header_level(next); - path->nodes[*level] = next; - path->slots[*level] = 0; - path->locks[*level] = 1; - cond_resched(); + if (wc->refs[level] == 1) { + if (level == 0) { + if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) + ret = btrfs_dec_ref(trans, root, eb, 1); + else + ret = btrfs_dec_ref(trans, root, eb, 0); + BUG_ON(ret); + } + /* make block locked assertion in clean_tree_block happy */ + if (!path->locks[level] && + btrfs_header_generation(eb) == trans->transid) { + btrfs_tree_lock(eb); + btrfs_set_lock_blocking(eb); + path->locks[level] = 1; + } + clean_tree_block(trans, root, eb); + } + + if (eb == root->node) { + if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) + parent = eb->start; + else + BUG_ON(root->root_key.objectid != + btrfs_header_owner(eb)); + } else { + if (wc->flags[level + 1] & BTRFS_BLOCK_FLAG_FULL_BACKREF) + parent = path->nodes[level + 1]->start; + else + BUG_ON(root->root_key.objectid != + btrfs_header_owner(path->nodes[level + 1])); } -out: - if (path->nodes[*level] == root->node) - parent = path->nodes[*level]; - else - parent = path->nodes[*level + 1]; - bytenr = path->nodes[*level]->start; - blocksize = path->nodes[*level]->len; - ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start, - btrfs_header_owner(parent), *level, 0); + ret = btrfs_free_extent(trans, root, eb->start, eb->len, parent, + root->root_key.objectid, level, 0); BUG_ON(ret); +out: + wc->refs[level] = 0; + wc->flags[level] = 0; + return ret; +} + +static noinline int walk_down_tree(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct walk_control *wc) +{ + struct extent_buffer *next; + struct extent_buffer *cur; + u64 bytenr; + u64 ptr_gen; + u32 blocksize; + int level = wc->level; + int ret; + + while (level >= 0) { + cur = path->nodes[level]; + BUG_ON(path->slots[level] >= btrfs_header_nritems(cur)); - if (path->locks[*level]) { - btrfs_tree_unlock(path->nodes[*level]); - path->locks[*level] = 0; + ret = walk_down_proc(trans, root, path, wc); + if (ret > 0) + break; + + if (level == 0) + break; + + bytenr = btrfs_node_blockptr(cur, path->slots[level]); + blocksize = btrfs_level_size(root, level - 1); + ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]); + + next = read_tree_block(root, bytenr, blocksize, ptr_gen); + btrfs_tree_lock(next); + btrfs_set_lock_blocking(next); + + level--; + BUG_ON(level != btrfs_header_level(next)); + path->nodes[level] = next; + path->slots[level] = 0; + path->locks[level] = 1; + wc->level = level; } - free_extent_buffer(path->nodes[*level]); - path->nodes[*level] = NULL; - *level += 1; - cond_resched(); return 0; } -/* - * helper for dropping snapshots. This walks back up the tree in the path - * to find the first node higher up where we haven't yet gone through - * all the slots - */ static noinline int walk_up_tree(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, - int *level, int max_level) + struct walk_control *wc, int max_level) { - struct btrfs_root_item *root_item = &root->root_item; - int i; - int slot; + int level = wc->level; int ret; - for (i = *level; i < max_level && path->nodes[i]; i++) { - slot = path->slots[i]; - if (slot + 1 < btrfs_header_nritems(path->nodes[i])) { - /* - * there is more work to do in this level. - * Update the drop_progress marker to reflect - * the work we've done so far, and then bump - * the slot number - */ - path->slots[i]++; - WARN_ON(*level == 0); - if (max_level == BTRFS_MAX_LEVEL) { - btrfs_node_key(path->nodes[i], - &root_item->drop_progress, - path->slots[i]); - root_item->drop_level = i; - } - *level = i; + path->slots[level] = btrfs_header_nritems(path->nodes[level]); + while (level < max_level && path->nodes[level]) { + wc->level = level; + if (path->slots[level] + 1 < + btrfs_header_nritems(path->nodes[level])) { + path->slots[level]++; return 0; } else { - struct extent_buffer *parent; - - /* - * this whole node is done, free our reference - * on it and go up one level - */ - if (path->nodes[*level] == root->node) - parent = path->nodes[*level]; - else - parent = path->nodes[*level + 1]; + ret = walk_up_proc(trans, root, path, wc); + if (ret > 0) + return 0; - clean_tree_block(trans, root, path->nodes[i]); - ret = btrfs_free_extent(trans, root, - path->nodes[i]->start, - path->nodes[i]->len, - parent->start, - btrfs_header_owner(parent), - *level, 0); - BUG_ON(ret); - if (path->locks[*level]) { - btrfs_tree_unlock(path->nodes[i]); - path->locks[i] = 0; + if (path->locks[level]) { + btrfs_tree_unlock(path->nodes[level]); + path->locks[level] = 0; } - free_extent_buffer(path->nodes[i]); - path->nodes[i] = NULL; - *level = i + 1; + free_extent_buffer(path->nodes[level]); + path->nodes[level] = NULL; + level++; } } return 1; } /* - * drop the reference count on the tree rooted at 'snap'. This traverses - * the tree freeing any blocks that have a ref count of zero after being - * decremented. + * drop a subvolume tree. + * + * this function traverses the tree freeing any blocks that only + * referenced by the tree. + * + * when a shared tree block is found. this function decreases its + * reference count by one. if update_ref is true, this function + * also make sure backrefs for the shared block and all lower level + * blocks are properly updated. */ -int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root - *root) +int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref) { - int ret = 0; - int wret; - int level; struct btrfs_path *path; - int update_count; + struct btrfs_trans_handle *trans; + struct btrfs_root *tree_root = root->fs_info->tree_root; struct btrfs_root_item *root_item = &root->root_item; + struct walk_control *wc; + struct btrfs_key key; + int err = 0; + int ret; + int level; path = btrfs_alloc_path(); BUG_ON(!path); - level = btrfs_header_level(root->node); + wc = kzalloc(sizeof(*wc), GFP_NOFS); + BUG_ON(!wc); + + trans = btrfs_start_transaction(tree_root, 1); + if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) { + level = btrfs_header_level(root->node); path->nodes[level] = btrfs_lock_root_node(root); btrfs_set_lock_blocking(path->nodes[level]); path->slots[level] = 0; path->locks[level] = 1; + memset(&wc->update_progress, 0, + sizeof(wc->update_progress)); } else { - struct btrfs_key key; - struct btrfs_disk_key found_key; - struct extent_buffer *node; - btrfs_disk_key_to_cpu(&key, &root_item->drop_progress); + memcpy(&wc->update_progress, &key, + sizeof(wc->update_progress)); + level = root_item->drop_level; + BUG_ON(level == 0); path->lowest_level = level; - wret = btrfs_search_slot(NULL, root, &key, path, 0, 0); - if (wret < 0) { - ret = wret; + ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + path->lowest_level = 0; + if (ret < 0) { + err = ret; goto out; } - node = path->nodes[level]; - btrfs_node_key(node, &found_key, path->slots[level]); - WARN_ON(memcmp(&found_key, &root_item->drop_progress, - sizeof(found_key))); + btrfs_node_key_to_cpu(path->nodes[level], &key, + path->slots[level]); + WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key))); + /* * unlock our path, this is safe because only this * function is allowed to delete this snapshot */ btrfs_unlock_up_safe(path, 0); + + level = btrfs_header_level(root->node); + while (1) { + btrfs_tree_lock(path->nodes[level]); + btrfs_set_lock_blocking(path->nodes[level]); + + ret = btrfs_lookup_extent_info(trans, root, + path->nodes[level]->start, + path->nodes[level]->len, + &wc->refs[level], + &wc->flags[level]); + BUG_ON(ret); + BUG_ON(wc->refs[level] == 0); + + if (level == root_item->drop_level) + break; + + btrfs_tree_unlock(path->nodes[level]); + WARN_ON(wc->refs[level] != 1); + level--; + } } + + wc->level = level; + wc->shared_level = -1; + wc->stage = DROP_REFERENCE; + wc->update_ref = update_ref; + wc->keep_locks = 0; + while (1) { - unsigned long update; - wret = walk_down_tree(trans, root, path, &level); - if (wret > 0) + ret = walk_down_tree(trans, root, path, wc); + if (ret < 0) { + err = ret; break; - if (wret < 0) - ret = wret; + } - wret = walk_up_tree(trans, root, path, &level, - BTRFS_MAX_LEVEL); - if (wret > 0) + ret = walk_up_tree(trans, root, path, wc, BTRFS_MAX_LEVEL); + if (ret < 0) { + err = ret; break; - if (wret < 0) - ret = wret; - if (trans->transaction->in_commit || - trans->transaction->delayed_refs.flushing) { - ret = -EAGAIN; + } + + if (ret > 0) { + BUG_ON(wc->stage != DROP_REFERENCE); break; } - for (update_count = 0; update_count < 16; update_count++) { + + if (wc->stage == DROP_REFERENCE) { + level = wc->level; + btrfs_node_key(path->nodes[level], + &root_item->drop_progress, + path->slots[level]); + root_item->drop_level = level; + } + + BUG_ON(wc->level == 0); + if (trans->transaction->in_commit || + trans->transaction->delayed_refs.flushing) { + ret = btrfs_update_root(trans, tree_root, + &root->root_key, + root_item); + BUG_ON(ret); + + btrfs_end_transaction(trans, tree_root); + trans = btrfs_start_transaction(tree_root, 1); + } else { + unsigned long update; update = trans->delayed_ref_updates; trans->delayed_ref_updates = 0; if (update) - btrfs_run_delayed_refs(trans, root, update); - else - break; + btrfs_run_delayed_refs(trans, tree_root, + update); } } + btrfs_release_path(root, path); + BUG_ON(err); + + ret = btrfs_del_root(trans, tree_root, &root->root_key); + BUG_ON(ret); + + free_extent_buffer(root->node); + free_extent_buffer(root->commit_root); + kfree(root); out: + btrfs_end_transaction(trans, tree_root); + kfree(wc); btrfs_free_path(path); - return ret; + return err; } +/* + * drop subtree rooted at tree block 'node'. + * + * NOTE: this function will unlock and release tree block 'node' + */ int btrfs_drop_subtree(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *node, struct extent_buffer *parent) { struct btrfs_path *path; + struct walk_control *wc; int level; int parent_level; int ret = 0; int wret; + BUG_ON(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID); + path = btrfs_alloc_path(); BUG_ON(!path); + wc = kzalloc(sizeof(*wc), GFP_NOFS); + BUG_ON(!wc); + btrfs_assert_tree_locked(parent); parent_level = btrfs_header_level(parent); extent_buffer_get(parent); @@ -4817,24 +5024,33 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans, btrfs_assert_tree_locked(node); level = btrfs_header_level(node); - extent_buffer_get(node); path->nodes[level] = node; path->slots[level] = 0; + path->locks[level] = 1; + + wc->refs[parent_level] = 1; + wc->flags[parent_level] = BTRFS_BLOCK_FLAG_FULL_BACKREF; + wc->level = level; + wc->shared_level = -1; + wc->stage = DROP_REFERENCE; + wc->update_ref = 0; + wc->keep_locks = 1; while (1) { - wret = walk_down_tree(trans, root, path, &level); - if (wret < 0) + wret = walk_down_tree(trans, root, path, wc); + if (wret < 0) { ret = wret; - if (wret != 0) break; + } - wret = walk_up_tree(trans, root, path, &level, parent_level); + wret = walk_up_tree(trans, root, path, wc, parent_level); if (wret < 0) ret = wret; if (wret != 0) break; } + kfree(wc); btrfs_free_path(path); return ret; } diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 126477eaecf..7c3cd248d8d 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -151,7 +151,10 @@ static noinline int dirty_and_release_pages(struct btrfs_trans_handle *trans, } if (end_pos > isize) { i_size_write(inode, end_pos); - btrfs_update_inode(trans, root, inode); + /* we've only changed i_size in ram, and we haven't updated + * the disk i_size. There is no need to log the inode + * at this time. + */ } err = btrfs_end_transaction(trans, root); out_unlock: diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index dbe1aabf96c..7ffa3d34ea1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3580,12 +3580,6 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, owner = 1; BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0, alloc_hint, owner); - if ((mode & S_IFREG)) { - if (btrfs_test_opt(root, NODATASUM)) - BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM; - if (btrfs_test_opt(root, NODATACOW)) - BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW; - } key[0].objectid = objectid; btrfs_set_key_type(&key[0], BTRFS_INODE_ITEM_KEY); @@ -3640,6 +3634,13 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, btrfs_inherit_iflags(inode, dir); + if ((mode & S_IFREG)) { + if (btrfs_test_opt(root, NODATASUM)) + BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM; + if (btrfs_test_opt(root, NODATACOW)) + BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW; + } + insert_inode_hash(inode); inode_tree_add(inode); return inode; @@ -5082,6 +5083,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, u64 mask = BTRFS_I(inode)->root->sectorsize - 1; struct extent_map *em; struct btrfs_trans_handle *trans; + struct btrfs_root *root; int ret; alloc_start = offset & ~mask; @@ -5100,6 +5102,13 @@ static long btrfs_fallocate(struct inode *inode, int mode, goto out; } + root = BTRFS_I(inode)->root; + + ret = btrfs_check_data_free_space(root, inode, + alloc_end - alloc_start); + if (ret) + goto out; + locked_end = alloc_end - 1; while (1) { struct btrfs_ordered_extent *ordered; @@ -5107,7 +5116,7 @@ static long btrfs_fallocate(struct inode *inode, int mode, trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1); if (!trans) { ret = -EIO; - goto out; + goto out_free; } /* the extent lock is ordered inside the running @@ -5168,6 +5177,8 @@ static long btrfs_fallocate(struct inode *inode, int mode, GFP_NOFS); btrfs_end_transaction(trans, BTRFS_I(inode)->root); +out_free: + btrfs_free_reserved_data_space(root, inode, alloc_end - alloc_start); out: mutex_unlock(&inode->i_mutex); return ret; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index eff18f5b536..9f4db848db1 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1028,7 +1028,8 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, struct btrfs_file_extent_item); comp = btrfs_file_extent_compression(leaf, extent); type = btrfs_file_extent_type(leaf, extent); - if (type == BTRFS_FILE_EXTENT_REG) { + if (type == BTRFS_FILE_EXTENT_REG || + type == BTRFS_FILE_EXTENT_PREALLOC) { disko = btrfs_file_extent_disk_bytenr(leaf, extent); diskl = btrfs_file_extent_disk_num_bytes(leaf, @@ -1051,7 +1052,8 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, new_key.objectid = inode->i_ino; new_key.offset = key.offset + destoff - off; - if (type == BTRFS_FILE_EXTENT_REG) { + if (type == BTRFS_FILE_EXTENT_REG || + type == BTRFS_FILE_EXTENT_PREALLOC) { ret = btrfs_insert_empty_item(trans, root, path, &new_key, size); if (ret) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index b23dc209ae1..00839793477 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1788,7 +1788,7 @@ static void merge_func(struct btrfs_work *work) btrfs_end_transaction(trans, root); } - btrfs_drop_dead_root(reloc_root); + btrfs_drop_snapshot(reloc_root, 0); if (atomic_dec_and_test(async->num_pending)) complete(async->done); @@ -2075,9 +2075,6 @@ static int do_relocation(struct btrfs_trans_handle *trans, ret = btrfs_drop_subtree(trans, root, eb, upper->eb); BUG_ON(ret); - - btrfs_tree_unlock(eb); - free_extent_buffer(eb); } if (!lowest) { btrfs_tree_unlock(upper->eb); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 4e83457ea25..2dbf1c1f56e 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -593,6 +593,7 @@ int btrfs_defrag_root(struct btrfs_root *root, int cacheonly) return 0; } +#if 0 /* * when dropping snapshots, we generate a ton of delayed refs, and it makes * sense not to join the transaction while it is trying to flush the current @@ -681,6 +682,7 @@ int btrfs_drop_dead_root(struct btrfs_root *root) btrfs_btree_balance_dirty(tree_root, nr); return ret; } +#endif /* * new snapshots need to be created at a very specific time in the @@ -1081,7 +1083,7 @@ int btrfs_clean_old_snapshots(struct btrfs_root *root) while (!list_empty(&list)) { root = list_entry(list.next, struct btrfs_root, root_list); list_del_init(&root->root_list); - btrfs_drop_dead_root(root); + btrfs_drop_snapshot(root, 0); } return 0; } diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index b4868983942..3a9b7a58a51 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,7 +5,7 @@ client generated ones by default (mount option "serverino" turned on by default if server supports it). Add forceuid and forcegid mount options (so that when negotiating unix extensions specifying which uid mounted does not immediately force the server's reported -uids to be overridden). +uids to be overridden). Add support for scope moutn parm. Version 1.58 ------------ diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index 1b09f167006..20692fbfdb2 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -49,6 +49,7 @@ #define ASN1_OJI 6 /* Object Identifier */ #define ASN1_OJD 7 /* Object Description */ #define ASN1_EXT 8 /* External */ +#define ASN1_ENUM 10 /* Enumerated */ #define ASN1_SEQ 16 /* Sequence */ #define ASN1_SET 17 /* Set */ #define ASN1_NUMSTR 18 /* Numerical String */ @@ -78,10 +79,12 @@ #define SPNEGO_OID_LEN 7 #define NTLMSSP_OID_LEN 10 #define KRB5_OID_LEN 7 +#define KRB5U2U_OID_LEN 8 #define MSKRB5_OID_LEN 7 static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 }; static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 }; static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 }; +static unsigned long KRB5U2U_OID[8] = { 1, 2, 840, 113554, 1, 2, 2, 3 }; static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 }; /* @@ -122,6 +125,28 @@ asn1_octet_decode(struct asn1_ctx *ctx, unsigned char *ch) return 1; } +#if 0 /* will be needed later by spnego decoding/encoding of ntlmssp */ +static unsigned char +asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val) +{ + unsigned char ch; + + if (ctx->pointer >= ctx->end) { + ctx->error = ASN1_ERR_DEC_EMPTY; + return 0; + } + + ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */ + if ((ch) == ASN1_ENUM) /* if ch value is ENUM, 0xa */ + *val = *(++(ctx->pointer)); /* value has enum value */ + else + return 0; + + ctx->pointer++; + return 1; +} +#endif + static unsigned char asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag) { @@ -476,10 +501,9 @@ decode_negTokenInit(unsigned char *security_blob, int length, unsigned int cls, con, tag, oidlen, rc; bool use_ntlmssp = false; bool use_kerberos = false; + bool use_kerberosu2u = false; bool use_mskerberos = false; - *secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/ - /* cifs_dump_mem(" Received SecBlob ", security_blob, length); */ asn1_open(&ctx, security_blob, length); @@ -515,6 +539,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, return 0; } + /* SPNEGO */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding negTokenInit")); return 0; @@ -526,6 +551,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, return 0; } + /* negTokenInit */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding negTokenInit")); return 0; @@ -537,6 +563,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, return 0; } + /* sequence */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding 2nd part of negTokenInit")); return 0; @@ -548,6 +575,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, return 0; } + /* sequence of */ if (asn1_header_decode (&ctx, &sequence_end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding 2nd part of negTokenInit")); @@ -560,6 +588,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, return 0; } + /* list of security mechanisms */ while (!asn1_eoc_decode(&ctx, sequence_end)) { rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag); if (!rc) { @@ -576,11 +605,15 @@ decode_negTokenInit(unsigned char *security_blob, int length, if (compare_oid(oid, oidlen, MSKRB5_OID, MSKRB5_OID_LEN) && - !use_kerberos) + !use_mskerberos) use_mskerberos = true; + else if (compare_oid(oid, oidlen, KRB5U2U_OID, + KRB5U2U_OID_LEN) && + !use_kerberosu2u) + use_kerberosu2u = true; else if (compare_oid(oid, oidlen, KRB5_OID, KRB5_OID_LEN) && - !use_mskerberos) + !use_kerberos) use_kerberos = true; else if (compare_oid(oid, oidlen, NTLMSSP_OID, NTLMSSP_OID_LEN)) @@ -593,7 +626,12 @@ decode_negTokenInit(unsigned char *security_blob, int length, } } + /* mechlistMIC */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + /* Check if we have reached the end of the blob, but with + no mechListMic (e.g. NTLMSSP instead of KRB5) */ + if (ctx.error == ASN1_ERR_DEC_EMPTY) + goto decode_negtoken_exit; cFYI(1, ("Error decoding last part negTokenInit exit3")); return 0; } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) { @@ -602,6 +640,8 @@ decode_negTokenInit(unsigned char *security_blob, int length, cls, con, tag, end, *end)); return 0; } + + /* sequence */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding last part negTokenInit exit5")); return 0; @@ -611,6 +651,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, cls, con, tag, end, *end)); } + /* sequence of */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding last part negTokenInit exit 7")); return 0; @@ -619,6 +660,8 @@ decode_negTokenInit(unsigned char *security_blob, int length, cls, con, tag, end, *end)); return 0; } + + /* general string */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding last part negTokenInit exit9")); return 0; @@ -630,13 +673,13 @@ decode_negTokenInit(unsigned char *security_blob, int length, } cFYI(1, ("Need to call asn1_octets_decode() function for %s", ctx.pointer)); /* is this UTF-8 or ASCII? */ - +decode_negtoken_exit: if (use_kerberos) *secType = Kerberos; else if (use_mskerberos) *secType = MSKerberos; else if (use_ntlmssp) - *secType = NTLMSSP; + *secType = RawNTLMSSP; return 1; } diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 0d92114195a..9f669f982c4 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -333,6 +333,27 @@ cifs_destroy_inode(struct inode *inode) kmem_cache_free(cifs_inode_cachep, CIFS_I(inode)); } +static void +cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server) +{ + seq_printf(s, ",addr="); + + switch (server->addr.sockAddr.sin_family) { + case AF_INET: + seq_printf(s, "%pI4", &server->addr.sockAddr.sin_addr.s_addr); + break; + case AF_INET6: + seq_printf(s, "%pI6", + &server->addr.sockAddr6.sin6_addr.s6_addr); + if (server->addr.sockAddr6.sin6_scope_id) + seq_printf(s, "%%%u", + server->addr.sockAddr6.sin6_scope_id); + break; + default: + seq_printf(s, "(unknown)"); + } +} + /* * cifs_show_options() is for displaying mount options in /proc/mounts. * Not all settable options are displayed but most of the important @@ -343,83 +364,64 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m) { struct cifs_sb_info *cifs_sb; struct cifsTconInfo *tcon; - struct TCP_Server_Info *server; cifs_sb = CIFS_SB(m->mnt_sb); + tcon = cifs_sb->tcon; - if (cifs_sb) { - tcon = cifs_sb->tcon; - if (tcon) { - seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName); - if (tcon->ses) { - if (tcon->ses->userName) - seq_printf(s, ",username=%s", - tcon->ses->userName); - if (tcon->ses->domainName) - seq_printf(s, ",domain=%s", - tcon->ses->domainName); - server = tcon->ses->server; - if (server) { - seq_printf(s, ",addr="); - switch (server->addr.sockAddr6. - sin6_family) { - case AF_INET6: - seq_printf(s, "%pI6", - &server->addr.sockAddr6.sin6_addr); - break; - case AF_INET: - seq_printf(s, "%pI4", - &server->addr.sockAddr.sin_addr.s_addr); - break; - } - } - } - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) || - !(tcon->unix_ext)) - seq_printf(s, ",uid=%d", cifs_sb->mnt_uid); - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) || - !(tcon->unix_ext)) - seq_printf(s, ",gid=%d", cifs_sb->mnt_gid); - if (!tcon->unix_ext) { - seq_printf(s, ",file_mode=0%o,dir_mode=0%o", + seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName); + if (tcon->ses->userName) + seq_printf(s, ",username=%s", tcon->ses->userName); + if (tcon->ses->domainName) + seq_printf(s, ",domain=%s", tcon->ses->domainName); + + seq_printf(s, ",uid=%d", cifs_sb->mnt_uid); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) + seq_printf(s, ",forceuid"); + + seq_printf(s, ",gid=%d", cifs_sb->mnt_gid); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) + seq_printf(s, ",forcegid"); + + cifs_show_address(s, tcon->ses->server); + + if (!tcon->unix_ext) + seq_printf(s, ",file_mode=0%o,dir_mode=0%o", cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode); - } - if (tcon->seal) - seq_printf(s, ",seal"); - if (tcon->nocase) - seq_printf(s, ",nocase"); - if (tcon->retry) - seq_printf(s, ",hard"); - } - if (cifs_sb->prepath) - seq_printf(s, ",prepath=%s", cifs_sb->prepath); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) - seq_printf(s, ",posixpaths"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) - seq_printf(s, ",setuids"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) - seq_printf(s, ",serverino"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) - seq_printf(s, ",directio"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR) - seq_printf(s, ",nouser_xattr"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR) - seq_printf(s, ",mapchars"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) - seq_printf(s, ",sfu"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL) - seq_printf(s, ",nobrl"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) - seq_printf(s, ",cifsacl"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) - seq_printf(s, ",dynperm"); - if (m->mnt_sb->s_flags & MS_POSIXACL) - seq_printf(s, ",acl"); - - seq_printf(s, ",rsize=%d", cifs_sb->rsize); - seq_printf(s, ",wsize=%d", cifs_sb->wsize); - } + if (tcon->seal) + seq_printf(s, ",seal"); + if (tcon->nocase) + seq_printf(s, ",nocase"); + if (tcon->retry) + seq_printf(s, ",hard"); + if (cifs_sb->prepath) + seq_printf(s, ",prepath=%s", cifs_sb->prepath); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) + seq_printf(s, ",posixpaths"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) + seq_printf(s, ",setuids"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) + seq_printf(s, ",serverino"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) + seq_printf(s, ",directio"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR) + seq_printf(s, ",nouser_xattr"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR) + seq_printf(s, ",mapchars"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) + seq_printf(s, ",sfu"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL) + seq_printf(s, ",nobrl"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) + seq_printf(s, ",cifsacl"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) + seq_printf(s, ",dynperm"); + if (m->mnt_sb->s_flags & MS_POSIXACL) + seq_printf(s, ",acl"); + + seq_printf(s, ",rsize=%d", cifs_sb->rsize); + seq_printf(s, ",wsize=%d", cifs_sb->wsize); + return 0; } @@ -535,9 +537,14 @@ static void cifs_umount_begin(struct super_block *sb) if (tcon == NULL) return; - lock_kernel(); read_lock(&cifs_tcp_ses_lock); - if (tcon->tc_count == 1) + if ((tcon->tc_count > 1) || (tcon->tidStatus == CifsExiting)) { + /* we have other mounts to same share or we have + already tried to force umount this and woken up + all waiting network requests, nothing to do */ + read_unlock(&cifs_tcp_ses_lock); + return; + } else if (tcon->tc_count == 1) tcon->tidStatus = CifsExiting; read_unlock(&cifs_tcp_ses_lock); @@ -552,9 +559,7 @@ static void cifs_umount_begin(struct super_block *sb) wake_up_all(&tcon->ses->server->response_q); msleep(1); } -/* BB FIXME - finish add checks for tidStatus BB */ - unlock_kernel(); return; } diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index a61ab772c6f..e1225e6ded2 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -83,7 +83,7 @@ enum securityEnum { NTLM, /* Legacy NTLM012 auth with NTLM hash */ NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */ RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */ - NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */ +/* NTLMSSP, */ /* can use rawNTLMSSP instead of NTLMSSP via SPNEGO */ Kerberos, /* Kerberos via SPNEGO */ MSKerberos, /* MS Kerberos via SPNEGO */ }; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index f9452329bcc..c419416a42e 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -74,7 +74,7 @@ extern unsigned int smbCalcSize(struct smb_hdr *ptr); extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr); extern int decode_negTokenInit(unsigned char *security_blob, int length, enum securityEnum *secType); -extern int cifs_inet_pton(const int, const char *source, void *dst); +extern int cifs_convert_address(char *src, void *dst); extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr); extern void header_assemble(struct smb_hdr *, char /* command */ , const struct cifsTconInfo *, int /* length of diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index b84c61d5bca..61007c62749 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -594,7 +594,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) else if (secFlags & CIFSSEC_MAY_KRB5) server->secType = Kerberos; else if (secFlags & CIFSSEC_MAY_NTLMSSP) - server->secType = NTLMSSP; + server->secType = RawNTLMSSP; else if (secFlags & CIFSSEC_MAY_LANMAN) server->secType = LANMAN; /* #ifdef CONFIG_CIFS_EXPERIMENTAL @@ -729,7 +729,7 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) * the tcon is no longer on the list, so no need to take lock before * checking this. */ - if (tcon->need_reconnect) + if ((tcon->need_reconnect) || (tcon->ses->need_reconnect)) return 0; rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 97f4311b9a8..e16d7592116 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -70,7 +70,6 @@ struct smb_vol { mode_t file_mode; mode_t dir_mode; unsigned secFlg; - bool rw:1; bool retry:1; bool intr:1; bool setuids:1; @@ -832,7 +831,6 @@ cifs_parse_mount_options(char *options, const char *devname, vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR; /* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */ - vol->rw = true; /* default is always to request posix paths. */ vol->posix_paths = 1; /* default to using server inode numbers where available */ @@ -1199,7 +1197,9 @@ cifs_parse_mount_options(char *options, const char *devname, } else if (strnicmp(data, "guest", 5) == 0) { /* ignore */ } else if (strnicmp(data, "rw", 2) == 0) { - vol->rw = true; + /* ignore */ + } else if (strnicmp(data, "ro", 2) == 0) { + /* ignore */ } else if (strnicmp(data, "noblocksend", 11) == 0) { vol->noblocksnd = 1; } else if (strnicmp(data, "noautotune", 10) == 0) { @@ -1218,8 +1218,6 @@ cifs_parse_mount_options(char *options, const char *devname, parse these options again and set anything and it is ok to just ignore them */ continue; - } else if (strnicmp(data, "ro", 2) == 0) { - vol->rw = false; } else if (strnicmp(data, "hard", 4) == 0) { vol->retry = 1; } else if (strnicmp(data, "soft", 4) == 0) { @@ -1386,8 +1384,10 @@ cifs_find_tcp_session(struct sockaddr_storage *addr) server->addr.sockAddr.sin_addr.s_addr)) continue; else if (addr->ss_family == AF_INET6 && - !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr, - &addr6->sin6_addr)) + (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr, + &addr6->sin6_addr) || + server->addr.sockAddr6.sin6_scope_id != + addr6->sin6_scope_id)) continue; ++server->srv_count; @@ -1433,28 +1433,15 @@ cifs_get_tcp_session(struct smb_vol *volume_info) memset(&addr, 0, sizeof(struct sockaddr_storage)); - if (volume_info->UNCip && volume_info->UNC) { - rc = cifs_inet_pton(AF_INET, volume_info->UNCip, - &sin_server->sin_addr.s_addr); - - if (rc <= 0) { - /* not ipv4 address, try ipv6 */ - rc = cifs_inet_pton(AF_INET6, volume_info->UNCip, - &sin_server6->sin6_addr.in6_u); - if (rc > 0) - addr.ss_family = AF_INET6; - } else { - addr.ss_family = AF_INET; - } + cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip)); - if (rc <= 0) { + if (volume_info->UNCip && volume_info->UNC) { + rc = cifs_convert_address(volume_info->UNCip, &addr); + if (!rc) { /* we failed translating address */ rc = -EINVAL; goto out_err; } - - cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, - volume_info->UNCip)); } else if (volume_info->UNCip) { /* BB using ip addr as tcp_ses name to connect to the DFS root below */ @@ -1513,14 +1500,14 @@ cifs_get_tcp_session(struct smb_vol *volume_info) cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ + sin_server6->sin6_port = htons(volume_info->port); memcpy(&tcp_ses->addr.sockAddr6, sin_server6, sizeof(struct sockaddr_in6)); - sin_server6->sin6_port = htons(volume_info->port); rc = ipv6_connect(tcp_ses); } else { + sin_server->sin_port = htons(volume_info->port); memcpy(&tcp_ses->addr.sockAddr, sin_server, sizeof(struct sockaddr_in)); - sin_server->sin_port = htons(volume_info->port); rc = ipv4_connect(tcp_ses); } if (rc < 0) { diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 3758965d73d..7dc6b74f9de 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -307,8 +307,9 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } if (oplockEnabled) @@ -540,8 +541,9 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL); if (buf == NULL) { kfree(full_path); + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } rc = CIFSSMBOpen(xid, pTcon, full_path, diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index df4a306f697..87948147d7e 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -35,26 +35,11 @@ * 0 - name is not IP */ static int -is_ip(const char *name) +is_ip(char *name) { - int rc; - struct sockaddr_in sin_server; - struct sockaddr_in6 sin_server6; - - rc = cifs_inet_pton(AF_INET, name, - &sin_server.sin_addr.s_addr); - - if (rc <= 0) { - /* not ipv4 address, try ipv6 */ - rc = cifs_inet_pton(AF_INET6, name, - &sin_server6.sin6_addr.in6_u); - if (rc > 0) - return 1; - } else { - return 1; - } - /* we failed translating address */ - return 0; + struct sockaddr_storage ss; + + return cifs_convert_address(name, &ss); } static int @@ -72,7 +57,7 @@ dns_resolver_instantiate(struct key *key, const void *data, ip[datalen] = '\0'; /* make sure this looks like an address */ - if (!is_ip((const char *) ip)) { + if (!is_ip(ip)) { kfree(ip); return -EINVAL; } diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 06866841b97..97ce4bf89d1 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -300,14 +300,16 @@ int cifs_open(struct inode *inode, struct file *file) pCifsInode = CIFS_I(file->f_path.dentry->d_inode); pCifsFile = cifs_fill_filedata(file); if (pCifsFile) { + rc = 0; FreeXid(xid); - return 0; + return rc; } full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } cFYI(1, ("inode = 0x%p file flags are 0x%x for %s", @@ -491,11 +493,12 @@ static int cifs_reopen_file(struct file *file, bool can_flush) return -EBADF; xid = GetXid(); - mutex_unlock(&pCifsFile->fh_mutex); + mutex_lock(&pCifsFile->fh_mutex); if (!pCifsFile->invalidHandle) { - mutex_lock(&pCifsFile->fh_mutex); + mutex_unlock(&pCifsFile->fh_mutex); + rc = 0; FreeXid(xid); - return 0; + return rc; } if (file->f_path.dentry == NULL) { @@ -524,7 +527,7 @@ static int cifs_reopen_file(struct file *file, bool can_flush) if (full_path == NULL) { rc = -ENOMEM; reopen_error_exit: - mutex_lock(&pCifsFile->fh_mutex); + mutex_unlock(&pCifsFile->fh_mutex); FreeXid(xid); return rc; } @@ -566,14 +569,14 @@ reopen_error_exit: cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc) { - mutex_lock(&pCifsFile->fh_mutex); + mutex_unlock(&pCifsFile->fh_mutex); cFYI(1, ("cifs_open returned 0x%x", rc)); cFYI(1, ("oplock: %d", oplock)); } else { reopen_success: pCifsFile->netfid = netfid; pCifsFile->invalidHandle = false; - mutex_lock(&pCifsFile->fh_mutex); + mutex_unlock(&pCifsFile->fh_mutex); pCifsInode = CIFS_I(inode); if (pCifsInode) { if (can_flush) { @@ -845,8 +848,9 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock) tcon = cifs_sb->tcon; if (file->private_data == NULL) { + rc = -EBADF; FreeXid(xid); - return -EBADF; + return rc; } netfid = ((struct cifsFileInfo *)file->private_data)->netfid; @@ -1805,8 +1809,9 @@ ssize_t cifs_user_read(struct file *file, char __user *read_data, pTcon = cifs_sb->tcon; if (file->private_data == NULL) { + rc = -EBADF; FreeXid(xid); - return -EBADF; + return rc; } open_file = (struct cifsFileInfo *)file->private_data; @@ -1885,8 +1890,9 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size, pTcon = cifs_sb->tcon; if (file->private_data == NULL) { + rc = -EBADF; FreeXid(xid); - return -EBADF; + return rc; } open_file = (struct cifsFileInfo *)file->private_data; @@ -2019,8 +2025,9 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, xid = GetXid(); if (file->private_data == NULL) { + rc = -EBADF; FreeXid(xid); - return -EBADF; + return rc; } open_file = (struct cifsFileInfo *)file->private_data; cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); @@ -2185,8 +2192,9 @@ static int cifs_readpage(struct file *file, struct page *page) xid = GetXid(); if (file->private_data == NULL) { + rc = -EBADF; FreeXid(xid); - return -EBADF; + return rc; } cFYI(1, ("readpage %p at offset %d 0x%x\n", diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fad882b075b..155c9e785d0 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -988,8 +988,9 @@ int cifs_unlink(struct inode *dir, struct dentry *dentry) * sb->s_vfs_rename_mutex here */ full_path = build_path_from_dentry(dentry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } if ((tcon->ses->capabilities & CAP_UNIX) && @@ -1118,8 +1119,9 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } if ((pTcon->ses->capabilities & CAP_UNIX) && @@ -1303,8 +1305,9 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls, @@ -1508,8 +1511,9 @@ int cifs_revalidate(struct dentry *direntry) since that would deadlock */ full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld " "jiffies %ld", full_path, direntry->d_inode, @@ -1911,8 +1915,9 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } /* diff --git a/fs/cifs/link.c b/fs/cifs/link.c index cd83c53fcbb..fc1e0487eae 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -172,8 +172,9 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname) full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } cFYI(1, ("Full path: %s", full_path)); diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c index 32d6baa0a54..bd6d6895730 100644 --- a/fs/cifs/netmisc.c +++ b/fs/cifs/netmisc.c @@ -133,10 +133,12 @@ static const struct smb_to_posix_error mapping_table_ERRHRD[] = { {0, 0} }; -/* Convert string containing dotted ip address to binary form */ -/* returns 0 if invalid address */ - -int +/* + * Convert a string containing text IPv4 or IPv6 address to binary form. + * + * Returns 0 on failure. + */ +static int cifs_inet_pton(const int address_family, const char *cp, void *dst) { int ret = 0; @@ -153,6 +155,52 @@ cifs_inet_pton(const int address_family, const char *cp, void *dst) return ret; } +/* + * Try to convert a string to an IPv4 address and then attempt to convert + * it to an IPv6 address if that fails. Set the family field if either + * succeeds. If it's an IPv6 address and it has a '%' sign in it, try to + * treat the part following it as a numeric sin6_scope_id. + * + * Returns 0 on failure. + */ +int +cifs_convert_address(char *src, void *dst) +{ + int rc; + char *pct, *endp; + struct sockaddr_in *s4 = (struct sockaddr_in *) dst; + struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst; + + /* IPv4 address */ + if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) { + s4->sin_family = AF_INET; + return 1; + } + + /* temporarily terminate string */ + pct = strchr(src, '%'); + if (pct) + *pct = '\0'; + + rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr); + + /* repair temp termination (if any) and make pct point to scopeid */ + if (pct) + *pct++ = '%'; + + if (!rc) + return rc; + + s6->sin6_family = AF_INET6; + if (pct) { + s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0); + if (!*pct || *endp) + return 0; + } + + return rc; +} + /***************************************************************************** convert a NT status code to a dos class/code *****************************************************************************/ diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 897a052270f..7085a6275c4 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -802,7 +802,7 @@ ssetup_ntlmssp_authenticate: #endif /* CONFIG_CIFS_UPCALL */ } else { #ifdef CONFIG_CIFS_EXPERIMENTAL - if ((experimEnabled > 1) && (type == RawNTLMSSP)) { + if (type == RawNTLMSSP) { if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) { cERROR(1, ("NTLMSSP requires Unicode support")); rc = -ENOSYS; diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index e9527eedc63..a75afa3dd9e 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -64,8 +64,9 @@ int cifs_removexattr(struct dentry *direntry, const char *ea_name) full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } if (ea_name == NULL) { cFYI(1, ("Null xattr names not supported")); @@ -118,8 +119,9 @@ int cifs_setxattr(struct dentry *direntry, const char *ea_name, full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } /* return dos attributes as pseudo xattr */ /* return alt name if available as pseudo attr */ @@ -225,8 +227,9 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name, full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } /* return dos attributes as pseudo xattr */ /* return alt name if available as pseudo attr */ @@ -351,8 +354,9 @@ ssize_t cifs_listxattr(struct dentry *direntry, char *data, size_t buf_size) full_path = build_path_from_dentry(direntry); if (full_path == NULL) { + rc = -ENOMEM; FreeXid(xid); - return -ENOMEM; + return rc; } /* return dos attributes as pseudo xattr */ /* return alt name if available as pseudo attr */ diff --git a/fs/compat.c b/fs/compat.c index cdd51a3a7c5..fbadb947727 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1486,8 +1486,8 @@ int compat_do_execve(char * filename, if (!bprm) goto out_files; - retval = mutex_lock_interruptible(¤t->cred_guard_mutex); - if (retval < 0) + retval = -ERESTARTNOINTR; + if (mutex_lock_interruptible(¤t->cred_guard_mutex)) goto out_free; current->in_execve = 1; diff --git a/fs/eventfd.c b/fs/eventfd.c index 3f0e1974abd..31d12de83a2 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -14,35 +14,44 @@ #include <linux/list.h> #include <linux/spinlock.h> #include <linux/anon_inodes.h> -#include <linux/eventfd.h> #include <linux/syscalls.h> #include <linux/module.h> +#include <linux/kref.h> +#include <linux/eventfd.h> struct eventfd_ctx { + struct kref kref; wait_queue_head_t wqh; /* * Every time that a write(2) is performed on an eventfd, the * value of the __u64 being written is added to "count" and a * wakeup is performed on "wqh". A read(2) will return the "count" * value to userspace, and will reset "count" to zero. The kernel - * size eventfd_signal() also, adds to the "count" counter and + * side eventfd_signal() also, adds to the "count" counter and * issue a wakeup. */ __u64 count; unsigned int flags; }; -/* - * Adds "n" to the eventfd counter "count". Returns "n" in case of - * success, or a value lower then "n" in case of coutner overflow. - * This function is supposed to be called by the kernel in paths - * that do not allow sleeping. In this function we allow the counter - * to reach the ULLONG_MAX value, and we signal this as overflow - * condition by returining a POLLERR to poll(2). +/** + * eventfd_signal - Adds @n to the eventfd counter. + * @ctx: [in] Pointer to the eventfd context. + * @n: [in] Value of the counter to be added to the eventfd internal counter. + * The value cannot be negative. + * + * This function is supposed to be called by the kernel in paths that do not + * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX + * value, and we signal this as overflow condition by returining a POLLERR + * to poll(2). + * + * Returns @n in case of success, a non-negative number lower than @n in case + * of overflow, or the following error codes: + * + * -EINVAL : The value of @n is negative. */ -int eventfd_signal(struct file *file, int n) +int eventfd_signal(struct eventfd_ctx *ctx, int n) { - struct eventfd_ctx *ctx = file->private_data; unsigned long flags; if (n < 0) @@ -59,9 +68,45 @@ int eventfd_signal(struct file *file, int n) } EXPORT_SYMBOL_GPL(eventfd_signal); +static void eventfd_free(struct kref *kref) +{ + struct eventfd_ctx *ctx = container_of(kref, struct eventfd_ctx, kref); + + kfree(ctx); +} + +/** + * eventfd_ctx_get - Acquires a reference to the internal eventfd context. + * @ctx: [in] Pointer to the eventfd context. + * + * Returns: In case of success, returns a pointer to the eventfd context. + */ +struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx) +{ + kref_get(&ctx->kref); + return ctx; +} +EXPORT_SYMBOL_GPL(eventfd_ctx_get); + +/** + * eventfd_ctx_put - Releases a reference to the internal eventfd context. + * @ctx: [in] Pointer to eventfd context. + * + * The eventfd context reference must have been previously acquired either + * with eventfd_ctx_get() or eventfd_ctx_fdget()). + */ +void eventfd_ctx_put(struct eventfd_ctx *ctx) +{ + kref_put(&ctx->kref, eventfd_free); +} +EXPORT_SYMBOL_GPL(eventfd_ctx_put); + static int eventfd_release(struct inode *inode, struct file *file) { - kfree(file->private_data); + struct eventfd_ctx *ctx = file->private_data; + + wake_up_poll(&ctx->wqh, POLLHUP); + eventfd_ctx_put(ctx); return 0; } @@ -185,6 +230,16 @@ static const struct file_operations eventfd_fops = { .write = eventfd_write, }; +/** + * eventfd_fget - Acquire a reference of an eventfd file descriptor. + * @fd: [in] Eventfd file descriptor. + * + * Returns a pointer to the eventfd file structure in case of success, or the + * following error pointer: + * + * -EBADF : Invalid @fd file descriptor. + * -EINVAL : The @fd file descriptor is not an eventfd file. + */ struct file *eventfd_fget(int fd) { struct file *file; @@ -201,6 +256,48 @@ struct file *eventfd_fget(int fd) } EXPORT_SYMBOL_GPL(eventfd_fget); +/** + * eventfd_ctx_fdget - Acquires a reference to the internal eventfd context. + * @fd: [in] Eventfd file descriptor. + * + * Returns a pointer to the internal eventfd context, otherwise the error + * pointers returned by the following functions: + * + * eventfd_fget + */ +struct eventfd_ctx *eventfd_ctx_fdget(int fd) +{ + struct file *file; + struct eventfd_ctx *ctx; + + file = eventfd_fget(fd); + if (IS_ERR(file)) + return (struct eventfd_ctx *) file; + ctx = eventfd_ctx_get(file->private_data); + fput(file); + + return ctx; +} +EXPORT_SYMBOL_GPL(eventfd_ctx_fdget); + +/** + * eventfd_ctx_fileget - Acquires a reference to the internal eventfd context. + * @file: [in] Eventfd file pointer. + * + * Returns a pointer to the internal eventfd context, otherwise the error + * pointer: + * + * -EINVAL : The @fd file descriptor is not an eventfd file. + */ +struct eventfd_ctx *eventfd_ctx_fileget(struct file *file) +{ + if (file->f_op != &eventfd_fops) + return ERR_PTR(-EINVAL); + + return eventfd_ctx_get(file->private_data); +} +EXPORT_SYMBOL_GPL(eventfd_ctx_fileget); + SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags) { int fd; @@ -217,6 +314,7 @@ SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags) if (!ctx) return -ENOMEM; + kref_init(&ctx->kref); init_waitqueue_head(&ctx->wqh); ctx->count = count; ctx->flags = flags; diff --git a/fs/exec.c b/fs/exec.c index e639957d7a5..4a8849e45b2 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1277,8 +1277,8 @@ int do_execve(char * filename, if (!bprm) goto out_files; - retval = mutex_lock_interruptible(¤t->cred_guard_mutex); - if (retval < 0) + retval = -ERESTARTNOINTR; + if (mutex_lock_interruptible(¤t->cred_guard_mutex)) goto out_free; current->in_execve = 1; diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c index 6524ecaebb7..e1dedb0f787 100644 --- a/fs/ext2/namei.c +++ b/fs/ext2/namei.c @@ -66,8 +66,16 @@ static struct dentry *ext2_lookup(struct inode * dir, struct dentry *dentry, str inode = NULL; if (ino) { inode = ext2_iget(dir->i_sb, ino); - if (IS_ERR(inode)) - return ERR_CAST(inode); + if (unlikely(IS_ERR(inode))) { + if (PTR_ERR(inode) == -ESTALE) { + ext2_error(dir->i_sb, __func__, + "deleted inode referenced: %lu", + ino); + return ERR_PTR(-EIO); + } else { + return ERR_CAST(inode); + } + } } return d_splice_alias(inode, dentry); } diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 8fed2ed12f3..f58ecbc416c 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -849,6 +849,81 @@ err: return err; } +static int fuse_notify_inval_inode(struct fuse_conn *fc, unsigned int size, + struct fuse_copy_state *cs) +{ + struct fuse_notify_inval_inode_out outarg; + int err = -EINVAL; + + if (size != sizeof(outarg)) + goto err; + + err = fuse_copy_one(cs, &outarg, sizeof(outarg)); + if (err) + goto err; + fuse_copy_finish(cs); + + down_read(&fc->killsb); + err = -ENOENT; + if (!fc->sb) + goto err_unlock; + + err = fuse_reverse_inval_inode(fc->sb, outarg.ino, + outarg.off, outarg.len); + +err_unlock: + up_read(&fc->killsb); + return err; + +err: + fuse_copy_finish(cs); + return err; +} + +static int fuse_notify_inval_entry(struct fuse_conn *fc, unsigned int size, + struct fuse_copy_state *cs) +{ + struct fuse_notify_inval_entry_out outarg; + int err = -EINVAL; + char buf[FUSE_NAME_MAX+1]; + struct qstr name; + + if (size < sizeof(outarg)) + goto err; + + err = fuse_copy_one(cs, &outarg, sizeof(outarg)); + if (err) + goto err; + + err = -ENAMETOOLONG; + if (outarg.namelen > FUSE_NAME_MAX) + goto err; + + name.name = buf; + name.len = outarg.namelen; + err = fuse_copy_one(cs, buf, outarg.namelen + 1); + if (err) + goto err; + fuse_copy_finish(cs); + buf[outarg.namelen] = 0; + name.hash = full_name_hash(name.name, name.len); + + down_read(&fc->killsb); + err = -ENOENT; + if (!fc->sb) + goto err_unlock; + + err = fuse_reverse_inval_entry(fc->sb, outarg.parent, &name); + +err_unlock: + up_read(&fc->killsb); + return err; + +err: + fuse_copy_finish(cs); + return err; +} + static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, unsigned int size, struct fuse_copy_state *cs) { @@ -856,6 +931,12 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, case FUSE_NOTIFY_POLL: return fuse_notify_poll(fc, size, cs); + case FUSE_NOTIFY_INVAL_INODE: + return fuse_notify_inval_inode(fc, size, cs); + + case FUSE_NOTIFY_INVAL_ENTRY: + return fuse_notify_inval_entry(fc, size, cs); + default: fuse_copy_finish(cs); return -EINVAL; @@ -910,7 +991,7 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos) { int err; - unsigned nbytes = iov_length(iov, nr_segs); + size_t nbytes = iov_length(iov, nr_segs); struct fuse_req *req; struct fuse_out_header oh; struct fuse_copy_state cs; diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index b3089a083d3..e703654e7f4 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -375,7 +375,7 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode, struct fuse_conn *fc = get_fuse_conn(dir); struct fuse_req *req; struct fuse_req *forget_req; - struct fuse_open_in inarg; + struct fuse_create_in inarg; struct fuse_open_out outopen; struct fuse_entry_out outentry; struct fuse_file *ff; @@ -399,15 +399,20 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode, if (!ff) goto out_put_request; + if (!fc->dont_mask) + mode &= ~current_umask(); + flags &= ~O_NOCTTY; memset(&inarg, 0, sizeof(inarg)); memset(&outentry, 0, sizeof(outentry)); inarg.flags = flags; inarg.mode = mode; + inarg.umask = current_umask(); req->in.h.opcode = FUSE_CREATE; req->in.h.nodeid = get_node_id(dir); req->in.numargs = 2; - req->in.args[0].size = sizeof(inarg); + req->in.args[0].size = fc->minor < 12 ? sizeof(struct fuse_open_in) : + sizeof(inarg); req->in.args[0].value = &inarg; req->in.args[1].size = entry->d_name.len + 1; req->in.args[1].value = entry->d_name.name; @@ -546,12 +551,17 @@ static int fuse_mknod(struct inode *dir, struct dentry *entry, int mode, if (IS_ERR(req)) return PTR_ERR(req); + if (!fc->dont_mask) + mode &= ~current_umask(); + memset(&inarg, 0, sizeof(inarg)); inarg.mode = mode; inarg.rdev = new_encode_dev(rdev); + inarg.umask = current_umask(); req->in.h.opcode = FUSE_MKNOD; req->in.numargs = 2; - req->in.args[0].size = sizeof(inarg); + req->in.args[0].size = fc->minor < 12 ? FUSE_COMPAT_MKNOD_IN_SIZE : + sizeof(inarg); req->in.args[0].value = &inarg; req->in.args[1].size = entry->d_name.len + 1; req->in.args[1].value = entry->d_name.name; @@ -578,8 +588,12 @@ static int fuse_mkdir(struct inode *dir, struct dentry *entry, int mode) if (IS_ERR(req)) return PTR_ERR(req); + if (!fc->dont_mask) + mode &= ~current_umask(); + memset(&inarg, 0, sizeof(inarg)); inarg.mode = mode; + inarg.umask = current_umask(); req->in.h.opcode = FUSE_MKDIR; req->in.numargs = 2; req->in.args[0].size = sizeof(inarg); @@ -845,6 +859,43 @@ int fuse_update_attributes(struct inode *inode, struct kstat *stat, return err; } +int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid, + struct qstr *name) +{ + int err = -ENOTDIR; + struct inode *parent; + struct dentry *dir; + struct dentry *entry; + + parent = ilookup5(sb, parent_nodeid, fuse_inode_eq, &parent_nodeid); + if (!parent) + return -ENOENT; + + mutex_lock(&parent->i_mutex); + if (!S_ISDIR(parent->i_mode)) + goto unlock; + + err = -ENOENT; + dir = d_find_alias(parent); + if (!dir) + goto unlock; + + entry = d_lookup(dir, name); + dput(dir); + if (!entry) + goto unlock; + + fuse_invalidate_attr(parent); + fuse_invalidate_entry(entry); + dput(entry); + err = 0; + + unlock: + mutex_unlock(&parent->i_mutex); + iput(parent); + return err; +} + /* * Calling into a user-controlled filesystem gives the filesystem * daemon ptrace-like capabilities over the requester process. This diff --git a/fs/fuse/file.c b/fs/fuse/file.c index fce6ce694fd..cbc464043b6 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1922,7 +1922,7 @@ unsigned fuse_file_poll(struct file *file, poll_table *wait) req = fuse_get_req(fc); if (IS_ERR(req)) - return PTR_ERR(req); + return POLLERR; req->in.h.opcode = FUSE_POLL; req->in.h.nodeid = ff->nodeid; diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index aaf2f9ff970..52b641fc0fa 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -446,6 +446,9 @@ struct fuse_conn { /** Do multi-page cached writes */ unsigned big_writes:1; + /** Don't apply umask to creation modes */ + unsigned dont_mask:1; + /** The number of requests waiting for completion */ atomic_t num_waiting; @@ -481,6 +484,12 @@ struct fuse_conn { /** Called on final put */ void (*release)(struct fuse_conn *); + + /** Super block for this connection. */ + struct super_block *sb; + + /** Read/write semaphore to hold when accessing sb. */ + struct rw_semaphore killsb; }; static inline struct fuse_conn *get_fuse_conn_super(struct super_block *sb) @@ -509,6 +518,11 @@ extern const struct file_operations fuse_dev_operations; extern const struct dentry_operations fuse_dentry_operations; /** + * Inode to nodeid comparison. + */ +int fuse_inode_eq(struct inode *inode, void *_nodeidp); + +/** * Get a filled in inode */ struct inode *fuse_iget(struct super_block *sb, u64 nodeid, @@ -708,6 +722,19 @@ void fuse_release_nowrite(struct inode *inode); u64 fuse_get_attr_version(struct fuse_conn *fc); +/** + * File-system tells the kernel to invalidate cache for the given node id. + */ +int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid, + loff_t offset, loff_t len); + +/** + * File-system tells the kernel to invalidate parent attributes and + * the dentry matching parent/name. + */ +int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid, + struct qstr *name); + int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file, bool isdir); ssize_t fuse_direct_io(struct file *file, const char __user *buf, diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index d8673ccf90b..f91ccc4a189 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -206,7 +206,7 @@ static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr) BUG(); } -static int fuse_inode_eq(struct inode *inode, void *_nodeidp) +int fuse_inode_eq(struct inode *inode, void *_nodeidp) { u64 nodeid = *(u64 *) _nodeidp; if (get_node_id(inode) == nodeid) @@ -257,6 +257,31 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid, return inode; } +int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid, + loff_t offset, loff_t len) +{ + struct inode *inode; + pgoff_t pg_start; + pgoff_t pg_end; + + inode = ilookup5(sb, nodeid, fuse_inode_eq, &nodeid); + if (!inode) + return -ENOENT; + + fuse_invalidate_attr(inode); + if (offset >= 0) { + pg_start = offset >> PAGE_CACHE_SHIFT; + if (len <= 0) + pg_end = -1; + else + pg_end = (offset + len - 1) >> PAGE_CACHE_SHIFT; + invalidate_inode_pages2_range(inode->i_mapping, + pg_start, pg_end); + } + iput(inode); + return 0; +} + static void fuse_umount_begin(struct super_block *sb) { fuse_abort_conn(get_fuse_conn_super(sb)); @@ -480,6 +505,7 @@ void fuse_conn_init(struct fuse_conn *fc) memset(fc, 0, sizeof(*fc)); spin_lock_init(&fc->lock); mutex_init(&fc->inst_mutex); + init_rwsem(&fc->killsb); atomic_set(&fc->count, 1); init_waitqueue_head(&fc->waitq); init_waitqueue_head(&fc->blocked_waitq); @@ -725,6 +751,8 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) } if (arg->flags & FUSE_BIG_WRITES) fc->big_writes = 1; + if (arg->flags & FUSE_DONT_MASK) + fc->dont_mask = 1; } else { ra_pages = fc->max_read / PAGE_CACHE_SIZE; fc->no_lock = 1; @@ -748,7 +776,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) arg->minor = FUSE_KERNEL_MINOR_VERSION; arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE; arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC | - FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES; + FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK; req->in.h.opcode = FUSE_INIT; req->in.numargs = 1; req->in.args[0].size = sizeof(*arg); @@ -860,10 +888,16 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fuse_conn_init(fc); fc->dev = sb->s_dev; + fc->sb = sb; err = fuse_bdi_init(fc, sb); if (err) goto err_put_conn; + /* Handle umasking inside the fuse code */ + if (sb->s_flags & MS_POSIXACL) + fc->dont_mask = 1; + sb->s_flags |= MS_POSIXACL; + fc->release = fuse_free_conn; fc->flags = d.flags; fc->user_id = d.user_id; @@ -941,12 +975,25 @@ static int fuse_get_sb(struct file_system_type *fs_type, return get_sb_nodev(fs_type, flags, raw_data, fuse_fill_super, mnt); } +static void fuse_kill_sb_anon(struct super_block *sb) +{ + struct fuse_conn *fc = get_fuse_conn_super(sb); + + if (fc) { + down_write(&fc->killsb); + fc->sb = NULL; + up_write(&fc->killsb); + } + + kill_anon_super(sb); +} + static struct file_system_type fuse_fs_type = { .owner = THIS_MODULE, .name = "fuse", .fs_flags = FS_HAS_SUBTYPE, .get_sb = fuse_get_sb, - .kill_sb = kill_anon_super, + .kill_sb = fuse_kill_sb_anon, }; #ifdef CONFIG_BLOCK @@ -958,11 +1005,24 @@ static int fuse_get_sb_blk(struct file_system_type *fs_type, mnt); } +static void fuse_kill_sb_blk(struct super_block *sb) +{ + struct fuse_conn *fc = get_fuse_conn_super(sb); + + if (fc) { + down_write(&fc->killsb); + fc->sb = NULL; + up_write(&fc->killsb); + } + + kill_block_super(sb); +} + static struct file_system_type fuseblk_fs_type = { .owner = THIS_MODULE, .name = "fuseblk", .get_sb = fuse_get_sb_blk, - .kill_sb = kill_block_super, + .kill_sb = fuse_kill_sb_blk, .fs_flags = FS_REQUIRES_DEV | FS_HAS_SUBTYPE, }; diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c index fe02ad4740e..032604e5ef2 100644 --- a/fs/hostfs/hostfs_kern.c +++ b/fs/hostfs/hostfs_kern.c @@ -972,6 +972,7 @@ static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent) sb->s_blocksize_bits = 10; sb->s_magic = HOSTFS_SUPER_MAGIC; sb->s_op = &hostfs_sbops; + sb->s_maxbytes = MAX_LFS_FILESIZE; /* NULL is printed as <NULL> by sprintf: avoid that. */ if (req_root == NULL) diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index a0244740b75..b47679be118 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -270,19 +270,21 @@ static inline void jffs2_remove_node_refs_from_ino_list(struct jffs2_sb_info *c, D2({ int i=0; struct jffs2_raw_node_ref *this; - printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n" KERN_DEBUG); + printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n"); this = ic->nodes; + printk(KERN_DEBUG); while(this) { - printk( "0x%08x(%d)->", ref_offset(this), ref_flags(this)); + printk(KERN_CONT "0x%08x(%d)->", + ref_offset(this), ref_flags(this)); if (++i == 5) { - printk("\n" KERN_DEBUG); + printk(KERN_DEBUG); i=0; } this = this->next_in_ino; } - printk("\n"); + printk(KERN_CONT "\n"); }); switch (ic->class) { diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c index 7515e73e2bf..696686cc206 100644 --- a/fs/jffs2/scan.c +++ b/fs/jffs2/scan.c @@ -130,9 +130,9 @@ int jffs2_scan_medium(struct jffs2_sb_info *c) if (jffs2_sum_active()) { s = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL); if (!s) { - kfree(flashbuf); JFFS2_WARNING("Can't allocate memory for summary\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out; } } diff --git a/fs/namei.c b/fs/namei.c index 5b961eb71cb..f3c5b278895 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1761,6 +1761,10 @@ do_last: goto exit; } filp = nameidata_to_filp(&nd, open_flag); + if (IS_ERR(filp)) + ima_counts_put(&nd.path, + acc_mode & (MAY_READ | MAY_WRITE | + MAY_EXEC)); mnt_drop_write(nd.path.mnt); if (nd.root.mnt) path_put(&nd.root); @@ -1817,6 +1821,9 @@ ok: goto exit; } filp = nameidata_to_filp(&nd, open_flag); + if (IS_ERR(filp)) + ima_counts_put(&nd.path, + acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC)); /* * It is now safe to drop the mnt write * because the filp has had a write taken diff --git a/fs/namespace.c b/fs/namespace.c index 3dc283fd471..277c28a63ea 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -22,6 +22,7 @@ #include <linux/seq_file.h> #include <linux/mnt_namespace.h> #include <linux/namei.h> +#include <linux/nsproxy.h> #include <linux/security.h> #include <linux/mount.h> #include <linux/ramfs.h> diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c index 46177cb8706..b35d2a61606 100644 --- a/fs/nfs/getroot.c +++ b/fs/nfs/getroot.c @@ -30,7 +30,6 @@ #include <linux/nfs_idmap.h> #include <linux/vfs.h> #include <linux/namei.h> -#include <linux/mnt_namespace.h> #include <linux/security.h> #include <asm/system.h> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 4145083dcf8..23341c1063b 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -678,7 +678,6 @@ __be32 nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access, struct file **filp) { - const struct cred *cred = current_cred(); struct dentry *dentry; struct inode *inode; int flags = O_RDONLY|O_LARGEFILE; @@ -733,7 +732,7 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, vfs_dq_init(inode); } *filp = dentry_open(dget(dentry), mntget(fhp->fh_export->ex_path.mnt), - flags, cred); + flags, current_cred()); if (IS_ERR(*filp)) host_err = PTR_ERR(*filp); else diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index ff231ad2389..ff27a296584 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -296,12 +296,15 @@ static int inotify_fasync(int fd, struct file *file, int on) static int inotify_release(struct inode *ignored, struct file *file) { struct fsnotify_group *group = file->private_data; + struct user_struct *user = group->inotify_data.user; fsnotify_clear_marks_by_group(group); /* free this group, matching get was inotify_init->fsnotify_obtain_group */ fsnotify_put_group(group); + atomic_dec(&user->inotify_devs); + return 0; } diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 607c579e5ec..70f36c043d6 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -2042,8 +2042,8 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, * changes */ invalidate_bdev(sb->s_bdev); } - mutex_lock(&inode->i_mutex); mutex_lock(&dqopt->dqonoff_mutex); + mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); if (sb_has_quota_loaded(sb, type)) { error = -EBUSY; goto out_lock; @@ -2094,7 +2094,6 @@ out_file_init: dqopt->files[type] = NULL; iput(inode); out_lock: - mutex_unlock(&dqopt->dqonoff_mutex); if (oldflags != -1) { down_write(&dqopt->dqptr_sem); /* Set the flags back (in the case of accidental quotaon() @@ -2104,6 +2103,7 @@ out_lock: up_write(&dqopt->dqptr_sem); } mutex_unlock(&inode->i_mutex); + mutex_unlock(&dqopt->dqonoff_mutex); out_fmt: put_quota_format(fmt); diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index d3aeb061612..7adea74d6a8 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -24,7 +24,6 @@ #include <linux/exportfs.h> #include <linux/quotaops.h> #include <linux/vfs.h> -#include <linux/mnt_namespace.h> #include <linux/mount.h> #include <linux/namei.h> #include <linux/crc32.h> diff --git a/fs/sync.c b/fs/sync.c index dd200025af8..3422ba61d86 100644 --- a/fs/sync.c +++ b/fs/sync.c @@ -112,8 +112,13 @@ restart: mutex_unlock(&mutex); } +/* + * sync everything. Start out by waking pdflush, because that writes back + * all queues in parallel. + */ SYSCALL_DEFINE0(sync) { + wakeup_pdflush(0); sync_filesystems(0); sync_filesystems(1); if (unlikely(laptop_mode)) diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 9345806c885..2524714bece 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -171,6 +171,7 @@ static ssize_t write(struct file *file, const char __user *userbuf, if (count > 0) *off = offs + count; + kfree(temp); return count; } diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index d7d50d7ee51..aa00800adac 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -97,4 +97,8 @@ extern void setup_per_cpu_areas(void); #define PER_CPU_ATTRIBUTES #endif +#ifndef PER_CPU_DEF_ATTRIBUTES +#define PER_CPU_DEF_ATTRIBUTES +#endif + #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 92b73b6140f..a553f1041cf 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -191,7 +191,7 @@ . = ALIGN(align); \ *(.data.cacheline_aligned) -#define INIT_TASK(align) \ +#define INIT_TASK_DATA(align) \ . = ALIGN(align); \ *(.data.init_task) @@ -434,14 +434,15 @@ /* * Init task */ -#define INIT_TASK_DATA(align) \ +#define INIT_TASK_DATA_SECTION(align) \ . = ALIGN(align); \ .data.init_task : { \ - INIT_TASK \ + INIT_TASK_DATA(align) \ } #ifdef CONFIG_CONSTRUCTORS -#define KERNEL_CTORS() VMLINUX_SYMBOL(__ctors_start) = .; \ +#define KERNEL_CTORS() . = ALIGN(8); \ + VMLINUX_SYMBOL(__ctors_start) = .; \ *(.ctors) \ VMLINUX_SYMBOL(__ctors_end) = .; #else @@ -704,15 +705,15 @@ * matches the requirment of PAGE_ALIGNED_DATA. * * use 0 as page_align if page_aligned data is not used */ -#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask) \ +#define RW_DATA_SECTION(cacheline, pagealigned, inittask) \ . = ALIGN(PAGE_SIZE); \ .data : AT(ADDR(.data) - LOAD_OFFSET) { \ - INIT_TASK(inittask) \ + INIT_TASK_DATA(inittask) \ CACHELINE_ALIGNED_DATA(cacheline) \ READ_MOSTLY_DATA(cacheline) \ DATA_DATA \ CONSTRUCTORS \ - NOSAVE_DATA(nosave) \ + NOSAVE_DATA \ PAGE_ALIGNED_DATA(pagealigned) \ } diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index c263e4d7175..7d6c9a2dfcb 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -35,11 +35,11 @@ struct est_timings { } __attribute__((packed)); /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */ -#define EDID_TIMING_ASPECT_SHIFT 0 +#define EDID_TIMING_ASPECT_SHIFT 6 #define EDID_TIMING_ASPECT_MASK (0x3 << EDID_TIMING_ASPECT_SHIFT) /* need to add 60 */ -#define EDID_TIMING_VFREQ_SHIFT 2 +#define EDID_TIMING_VFREQ_SHIFT 0 #define EDID_TIMING_VFREQ_MASK (0x3f << EDID_TIMING_VFREQ_SHIFT) struct std_timing { @@ -47,11 +47,11 @@ struct std_timing { u8 vfreq_aspect; } __attribute__((packed)); -#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6) -#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5) +#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1) +#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2) #define DRM_EDID_PT_SEPARATE_SYNC (3 << 3) -#define DRM_EDID_PT_STEREO (1 << 2) -#define DRM_EDID_PT_INTERLACED (1 << 1) +#define DRM_EDID_PT_STEREO (1 << 5) +#define DRM_EDID_PT_INTERLACED (1 << 7) /* If detailed data is pixel timing */ struct detailed_pixel_timing { @@ -93,7 +93,7 @@ struct detailed_data_monitor_range { } __attribute__((packed)); struct detailed_data_wpindex { - u8 white_xy_lo; /* Upper 2 bits each */ + u8 white_yx_lo; /* Lower 2 bits each */ u8 white_x_hi; u8 white_y_hi; u8 gamma; /* need to divide by 100 then add 1 */ @@ -135,21 +135,21 @@ struct detailed_timing { } data; } __attribute__((packed)); -#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7) -#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 5) -#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 4) +#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0) +#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 1) +#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 2) #define DRM_EDID_INPUT_SEPARATE_SYNCS (1 << 3) -#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 2) -#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 1) -#define DRM_EDID_INPUT_DIGITAL (1 << 0) /* bits above must be zero if set */ +#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 4) +#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 5) +#define DRM_EDID_INPUT_DIGITAL (1 << 7) /* bits below must be zero if set */ -#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 7) -#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6) -#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 5) +#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 0) +#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1) +#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 2) #define DRM_EDID_FEATURE_DISPLAY_TYPE (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */ -#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 2) -#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 1) -#define DRM_EDID_FEATURE_PM_STANDBY (1 << 0) +#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 5) +#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 6) +#define DRM_EDID_FEATURE_PM_STANDBY (1 << 7) struct edid { u8 header[8]; diff --git a/include/linux/aio.h b/include/linux/aio.h index b16a957030f..47f7d932a01 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -121,9 +121,9 @@ struct kiocb { /* * If the aio_resfd field of the userspace iocb is not zero, - * this is the underlying file* to deliver event to. + * this is the underlying eventfd context to deliver events to. */ - struct file *ki_eventfd; + struct eventfd_ctx *ki_eventfd; }; #define is_sync_kiocb(iocb) ((iocb)->ki_key == KIOCB_SYNC_KEY) diff --git a/include/linux/bio.h b/include/linux/bio.h index 2a04eb54c0d..2892b710771 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -319,7 +319,6 @@ static inline int bio_has_allocated_vec(struct bio *bio) */ struct bio_integrity_payload { struct bio *bip_bio; /* parent bio */ - struct bio_vec *bip_vec; /* integrity data vector */ sector_t bip_sector; /* virtual start sector */ @@ -328,11 +327,12 @@ struct bio_integrity_payload { unsigned int bip_size; - unsigned short bip_pool; /* pool the ivec came from */ + unsigned short bip_slab; /* slab the bip came from */ unsigned short bip_vcnt; /* # of integrity bio_vecs */ unsigned short bip_idx; /* current bip_vec index */ struct work_struct bip_work; /* I/O completion */ + struct bio_vec bip_vec[0]; /* embedded bvec array */ }; #endif /* CONFIG_BLK_DEV_INTEGRITY */ @@ -430,6 +430,9 @@ struct bio_set { unsigned int front_pad; mempool_t *bio_pool; +#if defined(CONFIG_BLK_DEV_INTEGRITY) + mempool_t *bio_integrity_pool; +#endif mempool_t *bvec_pool; }; @@ -634,8 +637,9 @@ static inline struct bio *bio_list_get(struct bio_list *bl) #define bio_integrity(bio) (bio->bi_integrity != NULL) +extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *); extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int); -extern void bio_integrity_free(struct bio *); +extern void bio_integrity_free(struct bio *, struct bio_set *); extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int); extern int bio_integrity_enabled(struct bio *bio); extern int bio_integrity_set_tag(struct bio *, void *, unsigned int); @@ -645,21 +649,27 @@ extern void bio_integrity_endio(struct bio *, int); extern void bio_integrity_advance(struct bio *, unsigned int); extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int); extern void bio_integrity_split(struct bio *, struct bio_pair *, int); -extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t); +extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *); +extern int bioset_integrity_create(struct bio_set *, int); +extern void bioset_integrity_free(struct bio_set *); +extern void bio_integrity_init(void); #else /* CONFIG_BLK_DEV_INTEGRITY */ #define bio_integrity(a) (0) +#define bioset_integrity_create(a, b) (0) #define bio_integrity_prep(a) (0) #define bio_integrity_enabled(a) (0) -#define bio_integrity_clone(a, b, c) (0) -#define bio_integrity_free(a) do { } while (0) +#define bio_integrity_clone(a, b, c, d) (0) +#define bioset_integrity_free(a) do { } while (0) +#define bio_integrity_free(a, b) do { } while (0) #define bio_integrity_endio(a, b) do { } while (0) #define bio_integrity_advance(a, b) do { } while (0) #define bio_integrity_trim(a, b, c) do { } while (0) #define bio_integrity_split(a, b, c) do { } while (0) #define bio_integrity_set_tag(a, b, c) do { } while (0) #define bio_integrity_get_tag(a, b, c) do { } while (0) +#define bio_integrity_init(a) do { } while (0) #endif /* CONFIG_BLK_DEV_INTEGRITY */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8963d9149b5..49ae07951d5 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -301,12 +301,6 @@ struct blk_queue_tag { #define BLK_SCSI_MAX_CMDS (256) #define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) -struct blk_cmd_filter { - unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; - unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; - struct kobject kobj; -}; - struct queue_limits { unsigned long bounce_pfn; unsigned long seg_boundary_mask; @@ -445,7 +439,6 @@ struct request_queue #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device bsg_dev; #endif - struct blk_cmd_filter cmd_filter; }; #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ @@ -998,13 +991,7 @@ static inline int sb_issue_discard(struct super_block *sb, return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL); } -/* -* command filter functions -*/ -extern int blk_verify_command(struct blk_cmd_filter *filter, - unsigned char *cmd, fmode_t has_write_perm); -extern void blk_unregister_filter(struct gendisk *disk); -extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter); +extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 7605c5e9589..00d6a68d042 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -122,9 +122,10 @@ static inline void elf_core_copy_kernel_regs(elf_gregset_t *elfregs, struct pt_r static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs) { -#ifdef ELF_CORE_COPY_TASK_REGS - +#if defined (ELF_CORE_COPY_TASK_REGS) return ELF_CORE_COPY_TASK_REGS(t, elfregs); +#elif defined (task_pt_regs) + elf_core_copy_regs(elfregs, task_pt_regs(t)); #endif return 0; } diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index f45a8ae5f82..3b85ba6479f 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -8,10 +8,8 @@ #ifndef _LINUX_EVENTFD_H #define _LINUX_EVENTFD_H -#ifdef CONFIG_EVENTFD - -/* For O_CLOEXEC and O_NONBLOCK */ #include <linux/fcntl.h> +#include <linux/file.h> /* * CAREFUL: Check include/asm-generic/fcntl.h when defining @@ -27,16 +25,37 @@ #define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK) #define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE) +#ifdef CONFIG_EVENTFD + +struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx); +void eventfd_ctx_put(struct eventfd_ctx *ctx); struct file *eventfd_fget(int fd); -int eventfd_signal(struct file *file, int n); +struct eventfd_ctx *eventfd_ctx_fdget(int fd); +struct eventfd_ctx *eventfd_ctx_fileget(struct file *file); +int eventfd_signal(struct eventfd_ctx *ctx, int n); #else /* CONFIG_EVENTFD */ -#define eventfd_fget(fd) ERR_PTR(-ENOSYS) -static inline int eventfd_signal(struct file *file, int n) -{ return 0; } +/* + * Ugly ugly ugly error layer to support modules that uses eventfd but + * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO. + */ +static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int eventfd_signal(struct eventfd_ctx *ctx, int n) +{ + return -ENOSYS; +} + +static inline void eventfd_ctx_put(struct eventfd_ctx *ctx) +{ + +} -#endif /* CONFIG_EVENTFD */ +#endif #endif /* _LINUX_EVENTFD_H */ diff --git a/include/linux/fb.h b/include/linux/fb.h index dd68358996b..f847df9e99b 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -819,6 +819,7 @@ struct fb_info { int node; int flags; struct mutex lock; /* Lock for open/release/ioctl funcs */ + struct mutex mm_lock; /* Lock for fb_mmap and smem_* fields */ struct fb_var_screeninfo var; /* Current var */ struct fb_fix_screeninfo fix; /* Current fix */ struct fb_monspecs monspecs; /* Current Monitor specs */ diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 9823946adbc..192d1e43c43 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -127,6 +127,7 @@ struct fw_card { struct delayed_work work; int bm_retries; int bm_generation; + __be32 bm_transaction_data[2]; bool broadcast_channel_allocated; u32 broadcast_channel; diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 44848aa830d..6c3de999fb3 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -280,7 +280,7 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) assert_spin_locked(&dentry->d_lock); parent = dentry->d_parent; - if (fsnotify_inode_watches_children(parent->d_inode)) + if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode)) dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED; else dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED; diff --git a/include/linux/fuse.h b/include/linux/fuse.h index d41ed593f79..cf593bf9fd3 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -25,6 +25,11 @@ * - add IOCTL message * - add unsolicited notification support * - add POLL message and NOTIFY_POLL notification + * + * 7.12 + * - add umask flag to input argument of open, mknod and mkdir + * - add notification messages for invalidation of inodes and + * directory entries */ #ifndef _LINUX_FUSE_H @@ -36,7 +41,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 11 +#define FUSE_KERNEL_MINOR_VERSION 12 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -112,6 +117,7 @@ struct fuse_file_lock { * INIT request/reply flags * * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." + * FUSE_DONT_MASK: don't apply umask to file mode on create operations */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -119,6 +125,7 @@ struct fuse_file_lock { #define FUSE_ATOMIC_O_TRUNC (1 << 3) #define FUSE_EXPORT_SUPPORT (1 << 4) #define FUSE_BIG_WRITES (1 << 5) +#define FUSE_DONT_MASK (1 << 6) /** * CUSE INIT request/reply flags @@ -224,6 +231,8 @@ enum fuse_opcode { enum fuse_notify_code { FUSE_NOTIFY_POLL = 1, + FUSE_NOTIFY_INVAL_INODE = 2, + FUSE_NOTIFY_INVAL_ENTRY = 3, FUSE_NOTIFY_CODE_MAX, }; @@ -262,14 +271,18 @@ struct fuse_attr_out { struct fuse_attr attr; }; +#define FUSE_COMPAT_MKNOD_IN_SIZE 8 + struct fuse_mknod_in { __u32 mode; __u32 rdev; + __u32 umask; + __u32 padding; }; struct fuse_mkdir_in { __u32 mode; - __u32 padding; + __u32 umask; }; struct fuse_rename_in { @@ -301,7 +314,14 @@ struct fuse_setattr_in { struct fuse_open_in { __u32 flags; + __u32 unused; +}; + +struct fuse_create_in { + __u32 flags; __u32 mode; + __u32 umask; + __u32 padding; }; struct fuse_open_out { @@ -508,4 +528,16 @@ struct fuse_dirent { #define FUSE_DIRENT_SIZE(d) \ FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) +struct fuse_notify_inval_inode_out { + __u64 ino; + __s64 off; + __s64 len; +}; + +struct fuse_notify_inval_entry_out { + __u64 parent; + __u32 namelen; + __u32 padding; +}; + #endif /* _LINUX_FUSE_H */ diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 7400900de94..54648e625ef 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -21,6 +21,7 @@ #include <linux/list.h> #include <linux/wait.h> #include <linux/percpu.h> +#include <linux/timer.h> struct hrtimer_clock_base; @@ -447,6 +448,8 @@ extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf, static inline void timer_stats_account_hrtimer(struct hrtimer *timer) { + if (likely(!timer->start_pid)) + return; timer_stats_update_stats(timer, timer->start_pid, timer->start_site, timer->function, timer->start_comm, 0); } @@ -456,6 +459,8 @@ extern void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer, static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer) { + if (likely(!timer_stats_active)) + return; __timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0)); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 95c6e00a72e..edc93a6d931 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1062,7 +1062,6 @@ int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned l extern int ide_vlb_clk; extern int ide_pci_clk; -unsigned int ide_rq_bytes(struct request *); int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int); void ide_kill_rq(ide_drive_t *, struct request *); @@ -1361,7 +1360,6 @@ int ide_in_drive_list(u16 *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int ide_dma_good_drive(ide_drive_t *); int __ide_dma_bad_drive(ide_drive_t *); -int ide_id_dma_bug(ide_drive_t *); u8 ide_find_dma_mode(ide_drive_t *, u8); @@ -1402,7 +1400,6 @@ void ide_dma_lost_irq(ide_drive_t *); ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int); #else -static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; } static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; } @@ -1422,6 +1419,7 @@ static inline void ide_dma_unmap_sg(ide_drive_t *drive, #ifdef CONFIG_BLK_DEV_IDEACPI int ide_acpi_init(void); +bool ide_port_acpi(ide_hwif_t *hwif); extern int ide_acpi_exec_tfs(ide_drive_t *drive); extern void ide_acpi_get_timing(ide_hwif_t *hwif); extern void ide_acpi_push_timing(ide_hwif_t *hwif); @@ -1430,6 +1428,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *); extern void ide_acpi_set_state(ide_hwif_t *hwif, int on); #else static inline int ide_acpi_init(void) { return 0; } +static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; } static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } diff --git a/include/linux/ima.h b/include/linux/ima.h index b1b827d091a..0e3f2a4c25f 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -24,6 +24,7 @@ extern int ima_path_check(struct path *path, int mask, int update_counts); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); extern void ima_counts_get(struct file *file); +extern void ima_counts_put(struct path *path, int mask); #else static inline int ima_bprm_check(struct linux_binprm *bprm) @@ -60,5 +61,10 @@ static inline void ima_counts_get(struct file *file) { return; } + +static inline void ima_counts_put(struct path *path, int mask) +{ + return; +} #endif /* CONFIG_IMA_H */ #endif /* _LINUX_IMA_H */ diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 5368fbdc780..7fc01b13be4 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -183,5 +183,8 @@ extern struct cred init_cred; LIST_HEAD_INIT(cpu_timers[2]), \ } +/* Attach to the init_task data structure for proper alignment */ +#define __init_task_data __attribute__((__section__(".data.init_task"))) + #endif diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h new file mode 100644 index 00000000000..7964516c695 --- /dev/null +++ b/include/linux/input/matrix_keypad.h @@ -0,0 +1,65 @@ +#ifndef _MATRIX_KEYPAD_H +#define _MATRIX_KEYPAD_H + +#include <linux/types.h> +#include <linux/input.h> + +#define MATRIX_MAX_ROWS 16 +#define MATRIX_MAX_COLS 16 + +#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\ + (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\ + (val & 0xffff)) + +#define KEY_ROW(k) (((k) >> 24) & 0xff) +#define KEY_COL(k) (((k) >> 16) & 0xff) +#define KEY_VAL(k) ((k) & 0xffff) + +/** + * struct matrix_keymap_data - keymap for matrix keyboards + * @keymap: pointer to array of uint32 values encoded with KEY() macro + * representing keymap + * @keymap_size: number of entries (initialized) in this keymap + * @max_keymap_size: maximum size of keymap supported by the device + * + * This structure is supposed to be used by platform code to supply + * keymaps to drivers that implement matrix-like keypads/keyboards. + */ +struct matrix_keymap_data { + const uint32_t *keymap; + unsigned int keymap_size; + unsigned int max_keymap_size; +}; + +/** + * struct matrix_keypad_platform_data - platform-dependent keypad data + * @keymap_data: pointer to &matrix_keymap_data + * @row_gpios: array of gpio numbers reporesenting rows + * @col_gpios: array of gpio numbers reporesenting colums + * @num_row_gpios: actual number of row gpios used by device + * @num_col_gpios: actual number of col gpios used by device + * @col_scan_delay_us: delay, measured in microseconds, that is + * needed before we can keypad after activating column gpio + * @debounce_ms: debounce interval in milliseconds + * + * This structure represents platform-specific data that use used by + * matrix_keypad driver to perform proper initialization. + */ +struct matrix_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + unsigned int row_gpios[MATRIX_MAX_ROWS]; + unsigned int col_gpios[MATRIX_MAX_COLS]; + unsigned int num_row_gpios; + unsigned int num_col_gpios; + + unsigned int col_scan_delay_us; + + /* key debounce interval in milli-second */ + unsigned int debounce_ms; + + bool active_low; + bool wakeup; +}; + +#endif /* _MATRIX_KEYPAD_H */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fac104e7186..d6320a3e8de 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -303,6 +303,7 @@ extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in extern int panic_timeout; extern int panic_on_oops; extern int panic_on_unrecovered_nmi; +extern int panic_on_io_nmi; extern const char *print_tainted(void); extern void add_taint(unsigned flag); extern int test_taint(unsigned flag); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index aacc5449f58..16713dc672e 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -125,6 +125,7 @@ struct kvm_kernel_irq_routing_entry { struct kvm { struct mutex lock; /* protects the vcpus array and APIC accesses */ spinlock_t mmu_lock; + spinlock_t requests_lock; struct rw_semaphore slots_lock; struct mm_struct *mm; /* userspace tied to this vm */ int nmemslots; diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h new file mode 100644 index 00000000000..afc9f9fd70f --- /dev/null +++ b/include/linux/leds-lp3944.h @@ -0,0 +1,53 @@ +/* + * leds-lp3944.h - platform data structure for lp3944 led controller + * + * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LEDS_LP3944_H +#define __LINUX_LEDS_LP3944_H + +#include <linux/leds.h> +#include <linux/workqueue.h> + +#define LP3944_LED0 0 +#define LP3944_LED1 1 +#define LP3944_LED2 2 +#define LP3944_LED3 3 +#define LP3944_LED4 4 +#define LP3944_LED5 5 +#define LP3944_LED6 6 +#define LP3944_LED7 7 +#define LP3944_LEDS_MAX 8 + +#define LP3944_LED_STATUS_MASK 0x03 +enum lp3944_status { + LP3944_LED_STATUS_OFF = 0x0, + LP3944_LED_STATUS_ON = 0x1, + LP3944_LED_STATUS_DIM0 = 0x2, + LP3944_LED_STATUS_DIM1 = 0x3 +}; + +enum lp3944_type { + LP3944_LED_TYPE_NONE, + LP3944_LED_TYPE_LED, + LP3944_LED_TYPE_LED_INVERTED, +}; + +struct lp3944_led { + char *name; + enum lp3944_type type; + enum lp3944_status status; +}; + +struct lp3944_platform_data { + struct lp3944_led leds[LP3944_LEDS_MAX]; + u8 leds_size; +}; + +#endif /* __LINUX_LEDS_LP3944_H */ diff --git a/include/linux/leds.h b/include/linux/leds.h index 376fe07732e..d8bf9665e70 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -45,7 +45,10 @@ struct led_classdev { /* Get LED brightness level */ enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); - /* Activate hardware accelerated blink */ + /* Activate hardware accelerated blink, delays are in + * miliseconds and if none is provided then a sensible default + * should be chosen. The call can adjust the timings if it can't + * match the values specified exactly. */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); @@ -141,9 +144,14 @@ struct gpio_led { const char *name; const char *default_trigger; unsigned gpio; - u8 active_low : 1; - u8 retain_state_suspended : 1; + unsigned active_low : 1; + unsigned retain_state_suspended : 1; + unsigned default_state : 2; + /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */ }; +#define LEDS_GPIO_DEFSTATE_OFF 0 +#define LEDS_GPIO_DEFSTATE_ON 1 +#define LEDS_GPIO_DEFSTATE_KEEP 2 struct gpio_led_platform_data { int num_leds; diff --git a/include/linux/linkage.h b/include/linux/linkage.h index fee9e59649c..691f59171c6 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -22,6 +22,15 @@ #define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE) /* + * For assembly routines. + * + * Note when using these that you must specify the appropriate + * alignment directives yourself + */ +#define __PAGE_ALIGNED_DATA .section ".data.page_aligned", "aw" +#define __PAGE_ALIGNED_BSS .section ".bss.page_aligned", "aw" + +/* * This is used by architectures to keep arguments on the stack * untouched by the compiler by keeping them live until the end. * The argument stack may be owned by the assembly-language diff --git a/include/linux/mm.h b/include/linux/mm.h index d006e93d5c9..ba3a7cb1eaa 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -826,7 +826,7 @@ extern int make_pages_present(unsigned long addr, unsigned long end); extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write); int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, - unsigned long start, int len, int write, int force, + unsigned long start, int nr_pages, int write, int force, struct page **pages, struct vm_area_struct **vmas); int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages); diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h index 3beb2592b03..d74785c2393 100644 --- a/include/linux/mnt_namespace.h +++ b/include/linux/mnt_namespace.h @@ -2,10 +2,9 @@ #define _NAMESPACE_H_ #ifdef __KERNEL__ -#include <linux/mount.h> -#include <linux/sched.h> -#include <linux/nsproxy.h> +#include <linux/path.h> #include <linux/seq_file.h> +#include <linux/wait.h> struct mnt_namespace { atomic_t count; @@ -28,14 +27,6 @@ extern struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt); extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *, struct fs_struct *); extern void put_mnt_ns(struct mnt_namespace *ns); - -static inline void exit_mnt_ns(struct task_struct *p) -{ - struct mnt_namespace *ns = p->nsproxy->mnt_ns; - if (ns) - put_mnt_ns(ns); -} - static inline void get_mnt_ns(struct mnt_namespace *ns) { atomic_inc(&ns->count); diff --git a/include/linux/pci.h b/include/linux/pci.h index d304ddf412d..115fb7ba508 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1145,7 +1145,7 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data) /* If you want to know what to call your pci_dev, ask this function. * Again, it's a wrapper around the generic device. */ -static inline const char *pci_name(struct pci_dev *pdev) +static inline const char *pci_name(const struct pci_dev *pdev) { return dev_name(&pdev->dev); } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index a3b00036579..73b46b6b904 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2645,6 +2645,7 @@ #define PCI_DEVICE_ID_NETMOS_9835 0x9835 #define PCI_DEVICE_ID_NETMOS_9845 0x9845 #define PCI_DEVICE_ID_NETMOS_9855 0x9855 +#define PCI_DEVICE_ID_NETMOS_9901 0x9901 #define PCI_VENDOR_ID_3COM_2 0xa727 diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index 8f921d74f49..68438e18fff 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -24,7 +24,8 @@ #define DEFINE_PER_CPU_SECTION(type, name, section) \ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES \ + __typeof__(type) per_cpu__##name /* * Variant on the per-CPU variable declaration/definition theme used for diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 89698d8aba5..5e970c7d3fd 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -178,8 +178,10 @@ struct perf_counter_attr { mmap : 1, /* include mmap data */ comm : 1, /* include comm data */ freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ - __reserved_1 : 53; + __reserved_1 : 51; __u32 wakeup_events; /* wakeup every n events */ __u32 __reserved_2; @@ -232,6 +234,14 @@ struct perf_counter_mmap_page { __u32 lock; /* seqlock for synchronization */ __u32 index; /* hardware counter identifier */ __s64 offset; /* add to hardware counter value */ + __u64 time_enabled; /* time counter active */ + __u64 time_running; /* time counter on cpu */ + + /* + * Hole for extension of the self monitor capabilities + */ + + __u64 __reserved[123]; /* align to 1k */ /* * Control data for the mmap() data buffer. @@ -253,7 +263,6 @@ struct perf_counter_mmap_page { #define PERF_EVENT_MISC_KERNEL (1 << 0) #define PERF_EVENT_MISC_USER (2 << 0) #define PERF_EVENT_MISC_HYPERVISOR (3 << 0) -#define PERF_EVENT_MISC_OVERFLOW (1 << 2) struct perf_event_header { __u32 type; @@ -327,9 +336,18 @@ enum perf_event_type { PERF_EVENT_FORK = 7, /* - * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field - * will be PERF_SAMPLE_* - * + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * u64 value; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 parent_id; } && PERF_FORMAT_ID + * }; + */ + PERF_EVENT_READ = 8, + + /* * struct { * struct perf_event_header header; * @@ -337,8 +355,9 @@ enum perf_event_type { * { u32 pid, tid; } && PERF_SAMPLE_TID * { u64 time; } && PERF_SAMPLE_TIME * { u64 addr; } && PERF_SAMPLE_ADDR - * { u64 config; } && PERF_SAMPLE_CONFIG + * { u64 id; } && PERF_SAMPLE_ID * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD * * { u64 nr; * { u64 id, val; } cnt[nr]; } && PERF_SAMPLE_GROUP @@ -347,6 +366,9 @@ enum perf_event_type { * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN * }; */ + PERF_EVENT_SAMPLE = 9, + + PERF_EVENT_MAX, /* non-ABI */ }; enum perf_callchain_context { @@ -582,6 +604,7 @@ struct perf_counter_context { int nr_counters; int nr_active; int is_active; + int nr_stat; atomic_t refcount; struct task_struct *task; @@ -669,7 +692,16 @@ static inline int is_software_counter(struct perf_counter *counter) (counter->attr.type != PERF_TYPE_HW_CACHE); } -extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64); +extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX]; + +extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64); + +static inline void +perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr) +{ + if (atomic_read(&perf_swcounter_enabled[event])) + __perf_swcounter_event(event, nr, nmi, regs, addr); +} extern void __perf_counter_mmap(struct vm_area_struct *vma); diff --git a/include/linux/sched.h b/include/linux/sched.h index 4d075426988..0085d758d64 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -349,8 +349,20 @@ extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner); struct nsproxy; struct user_namespace; -/* Maximum number of active map areas.. This is a random (large) number */ -#define DEFAULT_MAX_MAP_COUNT 65536 +/* + * Default maximum number of active map areas, this limits the number of vmas + * per mm struct. Users can overwrite this number by sysctl but there is a + * problem. + * + * When a program's coredump is generated as ELF format, a section is created + * per a vma. In ELF, the number of sections is represented in unsigned short. + * This means the number of sections should be smaller than 65535 at coredump. + * Because the kernel adds some informative sections to a image of program at + * generating coredump, we need some margin. The number of extra sections is + * 1-3 now and depends on arch. We use "5" as safe margin, here. + */ +#define MAPCOUNT_ELF_CORE_MARGIN (5) +#define DEFAULT_MAX_MAP_COUNT (USHORT_MAX - MAPCOUNT_ELF_CORE_MARGIN) extern int sysctl_max_map_count; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 9c4cd27f468..c47c4b4da97 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -80,6 +80,8 @@ struct spi_device { #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */ #define SPI_LOOP 0x20 /* loopback mode */ +#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */ +#define SPI_READY 0x80 /* slave pulls low to pause */ u8 bits_per_word; int irq; void *controller_state; @@ -248,6 +250,10 @@ struct spi_master { /* spi_device.mode flags understood by this controller driver */ u16 mode_bits; + /* other constraints relevant to this driver */ + u16 flags; +#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ + /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h index 95251ccd5a0..bf0570a84f7 100644 --- a/include/linux/spi/spidev.h +++ b/include/linux/spi/spidev.h @@ -40,6 +40,8 @@ #define SPI_LSB_FIRST 0x08 #define SPI_3WIRE 0x10 #define SPI_LOOP 0x20 +#define SPI_NO_CS 0x40 +#define SPI_READY 0x80 /*---------------------------------------------------------------------------*/ diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h index 98a1d8cfb73..99adcdc0d3c 100644 --- a/include/linux/sysrq.h +++ b/include/linux/sysrq.h @@ -14,6 +14,8 @@ #ifndef _LINUX_SYSRQ_H #define _LINUX_SYSRQ_H +#include <linux/errno.h> + struct pt_regs; struct tty_struct; diff --git a/include/linux/timer.h b/include/linux/timer.h index ccf882eed8f..be62ec2ebea 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -190,6 +190,8 @@ extern unsigned long get_next_timer_interrupt(unsigned long now); */ #ifdef CONFIG_TIMER_STATS +extern int timer_stats_active; + #define TIMER_STATS_FLAG_DEFERRABLE 0x1 extern void init_timer_stats(void); @@ -203,6 +205,8 @@ extern void __timer_stats_timer_set_start_info(struct timer_list *timer, static inline void timer_stats_timer_set_start_info(struct timer_list *timer) { + if (likely(!timer_stats_active)) + return; __timer_stats_timer_set_start_info(timer, __builtin_return_address(0)); } diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 8a025d51090..95846d98801 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -318,6 +318,8 @@ struct v4l2_pix_format { /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ + /* * 10bit raw bayer, expanded to 16 bits * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 4d7e2272c42..11a4a2d3e36 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -155,6 +155,9 @@ enum { /* module cafe_ccic, just ident 8801 */ V4L2_IDENT_CAFE = 8801, + /* module mt9v011, just ident 8243 */ + V4L2_IDENT_MT9V011 = 8243, + /* module tw9910: just ident 9910 */ V4L2_IDENT_TW9910 = 9910, diff --git a/ipc/mqueue.c b/ipc/mqueue.c index e35ba2c3a8d..c5e68adc673 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -32,6 +32,7 @@ #include <linux/nsproxy.h> #include <linux/pid.h> #include <linux/ipc_namespace.h> +#include <linux/ima.h> #include <net/sock.h> #include "util.h" @@ -733,6 +734,7 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, mode_t, mode, error = PTR_ERR(filp); goto out_putfd; } + ima_counts_get(filp); fd_install(fd, filp); goto out_upsem; diff --git a/kernel/Makefile b/kernel/Makefile index 780c8dcf451..2093a691f1c 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -96,6 +96,7 @@ obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o obj-$(CONFIG_FUNCTION_TRACER) += trace/ obj-$(CONFIG_TRACING) += trace/ obj-$(CONFIG_X86_DS) += trace/ +obj-$(CONFIG_RING_BUFFER) += trace/ obj-$(CONFIG_SMP) += sched_cpupri.o obj-$(CONFIG_SLOW_WORK) += slow-work.o obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o diff --git a/kernel/acct.c b/kernel/acct.c index 7afa3156416..9f3391090b3 100644 --- a/kernel/acct.c +++ b/kernel/acct.c @@ -215,6 +215,7 @@ static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file, static int acct_on(char *name) { struct file *file; + struct vfsmount *mnt; int error; struct pid_namespace *ns; struct bsd_acct_struct *acct = NULL; @@ -256,11 +257,12 @@ static int acct_on(char *name) acct = NULL; } - mnt_pin(file->f_path.mnt); + mnt = file->f_path.mnt; + mnt_pin(mnt); acct_file_reopen(ns->bacct, file, ns); spin_unlock(&acct_lock); - mntput(file->f_path.mnt); /* it's pinned, now give up active reference */ + mntput(mnt); /* it's pinned, now give up active reference */ kfree(acct); return 0; diff --git a/kernel/exit.c b/kernel/exit.c index 628d41f0dd5..869dc221733 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -12,7 +12,6 @@ #include <linux/completion.h> #include <linux/personality.h> #include <linux/tty.h> -#include <linux/mnt_namespace.h> #include <linux/iocontext.h> #include <linux/key.h> #include <linux/security.h> diff --git a/kernel/fork.c b/kernel/fork.c index 467746b3f0a..bd295922887 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/completion.h> -#include <linux/mnt_namespace.h> #include <linux/personality.h> #include <linux/mempolicy.h> #include <linux/sem.h> diff --git a/kernel/futex.c b/kernel/futex.c index 1c337112335..794c862125f 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -299,7 +299,7 @@ void put_futex_key(int fshared, union futex_key *key) static int fault_in_user_writeable(u32 __user *uaddr) { int ret = get_user_pages(current, current->mm, (unsigned long)uaddr, - sizeof(*uaddr), 1, 0, NULL, NULL); + 1, 1, 0, NULL, NULL); return ret < 0 ? ret : 0; } diff --git a/kernel/kmod.c b/kernel/kmod.c index 7e95bedb2bf..385c31a1bdb 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -24,7 +24,6 @@ #include <linux/unistd.h> #include <linux/kmod.h> #include <linux/slab.h> -#include <linux/mnt_namespace.h> #include <linux/completion.h> #include <linux/file.h> #include <linux/fdtable.h> diff --git a/kernel/module.c b/kernel/module.c index 38928fcaff2..0a049837008 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2451,9 +2451,9 @@ SYSCALL_DEFINE3(init_module, void __user *, umod, return ret; } if (ret > 0) { - printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, " - "it should follow 0/-E convention\n" - KERN_WARNING "%s: loading module anyway...\n", + printk(KERN_WARNING +"%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention\n" +"%s: loading module anyway...\n", __func__, mod->name, ret, __func__); dump_stack(); diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index 1a933a221ea..a641eb753b8 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -236,6 +236,8 @@ list_add_counter(struct perf_counter *counter, struct perf_counter_context *ctx) list_add_rcu(&counter->event_entry, &ctx->event_list); ctx->nr_counters++; + if (counter->attr.inherit_stat) + ctx->nr_stat++; } /* @@ -250,6 +252,8 @@ list_del_counter(struct perf_counter *counter, struct perf_counter_context *ctx) if (list_empty(&counter->list_entry)) return; ctx->nr_counters--; + if (counter->attr.inherit_stat) + ctx->nr_stat--; list_del_init(&counter->list_entry); list_del_rcu(&counter->event_entry); @@ -1006,6 +1010,81 @@ static int context_equiv(struct perf_counter_context *ctx1, && !ctx1->pin_count && !ctx2->pin_count; } +static void __perf_counter_read(void *counter); + +static void __perf_counter_sync_stat(struct perf_counter *counter, + struct perf_counter *next_counter) +{ + u64 value; + + if (!counter->attr.inherit_stat) + return; + + /* + * Update the counter value, we cannot use perf_counter_read() + * because we're in the middle of a context switch and have IRQs + * disabled, which upsets smp_call_function_single(), however + * we know the counter must be on the current CPU, therefore we + * don't need to use it. + */ + switch (counter->state) { + case PERF_COUNTER_STATE_ACTIVE: + __perf_counter_read(counter); + break; + + case PERF_COUNTER_STATE_INACTIVE: + update_counter_times(counter); + break; + + default: + break; + } + + /* + * In order to keep per-task stats reliable we need to flip the counter + * values when we flip the contexts. + */ + value = atomic64_read(&next_counter->count); + value = atomic64_xchg(&counter->count, value); + atomic64_set(&next_counter->count, value); + + swap(counter->total_time_enabled, next_counter->total_time_enabled); + swap(counter->total_time_running, next_counter->total_time_running); + + /* + * Since we swizzled the values, update the user visible data too. + */ + perf_counter_update_userpage(counter); + perf_counter_update_userpage(next_counter); +} + +#define list_next_entry(pos, member) \ + list_entry(pos->member.next, typeof(*pos), member) + +static void perf_counter_sync_stat(struct perf_counter_context *ctx, + struct perf_counter_context *next_ctx) +{ + struct perf_counter *counter, *next_counter; + + if (!ctx->nr_stat) + return; + + counter = list_first_entry(&ctx->event_list, + struct perf_counter, event_entry); + + next_counter = list_first_entry(&next_ctx->event_list, + struct perf_counter, event_entry); + + while (&counter->event_entry != &ctx->event_list && + &next_counter->event_entry != &next_ctx->event_list) { + + __perf_counter_sync_stat(counter, next_counter); + + counter = list_next_entry(counter, event_entry); + next_counter = list_next_entry(counter, event_entry); + } +} + /* * Called from scheduler to remove the counters of the current task, * with interrupts disabled. @@ -1061,6 +1140,8 @@ void perf_counter_task_sched_out(struct task_struct *task, ctx->task = next; next_ctx->task = task; do_switch = 0; + + perf_counter_sync_stat(ctx, next_ctx); } spin_unlock(&next_ctx->lock); spin_unlock(&ctx->lock); @@ -1348,9 +1429,56 @@ void perf_counter_task_tick(struct task_struct *curr, int cpu) } /* + * Enable all of a task's counters that have been marked enable-on-exec. + * This expects task == current. + */ +static void perf_counter_enable_on_exec(struct task_struct *task) +{ + struct perf_counter_context *ctx; + struct perf_counter *counter; + unsigned long flags; + int enabled = 0; + + local_irq_save(flags); + ctx = task->perf_counter_ctxp; + if (!ctx || !ctx->nr_counters) + goto out; + + __perf_counter_task_sched_out(ctx); + + spin_lock(&ctx->lock); + + list_for_each_entry(counter, &ctx->counter_list, list_entry) { + if (!counter->attr.enable_on_exec) + continue; + counter->attr.enable_on_exec = 0; + if (counter->state >= PERF_COUNTER_STATE_INACTIVE) + continue; + counter->state = PERF_COUNTER_STATE_INACTIVE; + counter->tstamp_enabled = + ctx->time - counter->total_time_enabled; + enabled = 1; + } + + /* + * Unclone this context if we enabled any counter. + */ + if (enabled && ctx->parent_ctx) { + put_ctx(ctx->parent_ctx); + ctx->parent_ctx = NULL; + } + + spin_unlock(&ctx->lock); + + perf_counter_task_sched_in(task, smp_processor_id()); + out: + local_irq_restore(flags); +} + +/* * Cross CPU call to read the hardware counter */ -static void __read(void *info) +static void __perf_counter_read(void *info) { struct perf_counter *counter = info; struct perf_counter_context *ctx = counter->ctx; @@ -1372,7 +1500,7 @@ static u64 perf_counter_read(struct perf_counter *counter) */ if (counter->state == PERF_COUNTER_STATE_ACTIVE) { smp_call_function_single(counter->oncpu, - __read, counter, 1); + __perf_counter_read, counter, 1); } else if (counter->state == PERF_COUNTER_STATE_INACTIVE) { update_counter_times(counter); } @@ -1508,11 +1636,13 @@ static void free_counter(struct perf_counter *counter) { perf_pending_sync(counter); - atomic_dec(&nr_counters); - if (counter->attr.mmap) - atomic_dec(&nr_mmap_counters); - if (counter->attr.comm) - atomic_dec(&nr_comm_counters); + if (!counter->parent) { + atomic_dec(&nr_counters); + if (counter->attr.mmap) + atomic_dec(&nr_mmap_counters); + if (counter->attr.comm) + atomic_dec(&nr_comm_counters); + } if (counter->destroy) counter->destroy(counter); @@ -1751,6 +1881,14 @@ int perf_counter_task_disable(void) return 0; } +static int perf_counter_index(struct perf_counter *counter) +{ + if (counter->state != PERF_COUNTER_STATE_ACTIVE) + return 0; + + return counter->hw.idx + 1 - PERF_COUNTER_INDEX_OFFSET; +} + /* * Callers need to ensure there can be no nesting of this function, otherwise * the seqlock logic goes bad. We can not serialize this because the arch @@ -1775,11 +1913,17 @@ void perf_counter_update_userpage(struct perf_counter *counter) preempt_disable(); ++userpg->lock; barrier(); - userpg->index = counter->hw.idx; + userpg->index = perf_counter_index(counter); userpg->offset = atomic64_read(&counter->count); if (counter->state == PERF_COUNTER_STATE_ACTIVE) userpg->offset -= atomic64_read(&counter->hw.prev_count); + userpg->time_enabled = counter->total_time_enabled + + atomic64_read(&counter->child_total_time_enabled); + + userpg->time_running = counter->total_time_running + + atomic64_read(&counter->child_total_time_running); + barrier(); ++userpg->lock; preempt_enable(); @@ -1876,7 +2020,7 @@ fail: static void perf_mmap_free_page(unsigned long addr) { - struct page *page = virt_to_page(addr); + struct page *page = virt_to_page((void *)addr); page->mapping = NULL; __free_page(page); @@ -2483,15 +2627,14 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, u32 cpu, reserved; } cpu_entry; - header.type = 0; + header.type = PERF_EVENT_SAMPLE; header.size = sizeof(header); - header.misc = PERF_EVENT_MISC_OVERFLOW; + header.misc = 0; header.misc |= perf_misc_flags(data->regs); if (sample_type & PERF_SAMPLE_IP) { ip = perf_instruction_pointer(data->regs); - header.type |= PERF_SAMPLE_IP; header.size += sizeof(ip); } @@ -2500,7 +2643,6 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, tid_entry.pid = perf_counter_pid(counter, current); tid_entry.tid = perf_counter_tid(counter, current); - header.type |= PERF_SAMPLE_TID; header.size += sizeof(tid_entry); } @@ -2510,34 +2652,25 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, */ time = sched_clock(); - header.type |= PERF_SAMPLE_TIME; header.size += sizeof(u64); } - if (sample_type & PERF_SAMPLE_ADDR) { - header.type |= PERF_SAMPLE_ADDR; + if (sample_type & PERF_SAMPLE_ADDR) header.size += sizeof(u64); - } - if (sample_type & PERF_SAMPLE_ID) { - header.type |= PERF_SAMPLE_ID; + if (sample_type & PERF_SAMPLE_ID) header.size += sizeof(u64); - } if (sample_type & PERF_SAMPLE_CPU) { - header.type |= PERF_SAMPLE_CPU; header.size += sizeof(cpu_entry); cpu_entry.cpu = raw_smp_processor_id(); } - if (sample_type & PERF_SAMPLE_PERIOD) { - header.type |= PERF_SAMPLE_PERIOD; + if (sample_type & PERF_SAMPLE_PERIOD) header.size += sizeof(u64); - } if (sample_type & PERF_SAMPLE_GROUP) { - header.type |= PERF_SAMPLE_GROUP; header.size += sizeof(u64) + counter->nr_siblings * sizeof(group_entry); } @@ -2547,10 +2680,9 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, if (callchain) { callchain_size = (1 + callchain->nr) * sizeof(u64); - - header.type |= PERF_SAMPLE_CALLCHAIN; header.size += callchain_size; - } + } else + header.size += sizeof(u64); } ret = perf_output_begin(&handle, counter, header.size, nmi, 1); @@ -2601,13 +2733,79 @@ static void perf_counter_output(struct perf_counter *counter, int nmi, } } - if (callchain) - perf_output_copy(&handle, callchain, callchain_size); + if (sample_type & PERF_SAMPLE_CALLCHAIN) { + if (callchain) + perf_output_copy(&handle, callchain, callchain_size); + else { + u64 nr = 0; + perf_output_put(&handle, nr); + } + } perf_output_end(&handle); } /* + * read event + */ + +struct perf_read_event { + struct perf_event_header header; + + u32 pid; + u32 tid; + u64 value; + u64 format[3]; +}; + +static void +perf_counter_read_event(struct perf_counter *counter, + struct task_struct *task) +{ + struct perf_output_handle handle; + struct perf_read_event event = { + .header = { + .type = PERF_EVENT_READ, + .misc = 0, + .size = sizeof(event) - sizeof(event.format), + }, + .pid = perf_counter_pid(counter, task), + .tid = perf_counter_tid(counter, task), + .value = atomic64_read(&counter->count), + }; + int ret, i = 0; + + if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) { + event.header.size += sizeof(u64); + event.format[i++] = counter->total_time_enabled; + } + + if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) { + event.header.size += sizeof(u64); + event.format[i++] = counter->total_time_running; + } + + if (counter->attr.read_format & PERF_FORMAT_ID) { + u64 id; + + event.header.size += sizeof(u64); + if (counter->parent) + id = counter->parent->id; + else + id = counter->id; + + event.format[i++] = id; + } + + ret = perf_output_begin(&handle, counter, event.header.size, 0, 0); + if (ret) + return; + + perf_output_copy(&handle, &event, event.header.size); + perf_output_end(&handle); +} + +/* * fork tracking */ @@ -2798,6 +2996,9 @@ void perf_counter_comm(struct task_struct *task) { struct perf_comm_event comm_event; + if (task->perf_counter_ctxp) + perf_counter_enable_on_exec(task); + if (!atomic_read(&nr_comm_counters)) return; @@ -3317,8 +3518,8 @@ out: put_cpu_var(perf_cpu_context); } -void -perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr) +void __perf_swcounter_event(u32 event, u64 nr, int nmi, + struct pt_regs *regs, u64 addr) { struct perf_sample_data data = { .regs = regs, @@ -3509,9 +3710,21 @@ static const struct pmu *tp_perf_counter_init(struct perf_counter *counter) } #endif +atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX]; + +static void sw_perf_counter_destroy(struct perf_counter *counter) +{ + u64 event = counter->attr.config; + + WARN_ON(counter->parent); + + atomic_dec(&perf_swcounter_enabled[event]); +} + static const struct pmu *sw_perf_counter_init(struct perf_counter *counter) { const struct pmu *pmu = NULL; + u64 event = counter->attr.config; /* * Software counters (currently) can't in general distinguish @@ -3520,7 +3733,7 @@ static const struct pmu *sw_perf_counter_init(struct perf_counter *counter) * to be kernel events, and page faults are never hypervisor * events. */ - switch (counter->attr.config) { + switch (event) { case PERF_COUNT_SW_CPU_CLOCK: pmu = &perf_ops_cpu_clock; @@ -3541,6 +3754,10 @@ static const struct pmu *sw_perf_counter_init(struct perf_counter *counter) case PERF_COUNT_SW_PAGE_FAULTS_MAJ: case PERF_COUNT_SW_CONTEXT_SWITCHES: case PERF_COUNT_SW_CPU_MIGRATIONS: + if (!counter->parent) { + atomic_inc(&perf_swcounter_enabled[event]); + counter->destroy = sw_perf_counter_destroy; + } pmu = &perf_ops_generic; break; } @@ -3556,6 +3773,7 @@ perf_counter_alloc(struct perf_counter_attr *attr, int cpu, struct perf_counter_context *ctx, struct perf_counter *group_leader, + struct perf_counter *parent_counter, gfp_t gfpflags) { const struct pmu *pmu; @@ -3591,6 +3809,8 @@ perf_counter_alloc(struct perf_counter_attr *attr, counter->ctx = ctx; counter->oncpu = -1; + counter->parent = parent_counter; + counter->ns = get_pid_ns(current->nsproxy->pid_ns); counter->id = atomic64_inc_return(&perf_counter_id); @@ -3648,11 +3868,13 @@ done: counter->pmu = pmu; - atomic_inc(&nr_counters); - if (counter->attr.mmap) - atomic_inc(&nr_mmap_counters); - if (counter->attr.comm) - atomic_inc(&nr_comm_counters); + if (!counter->parent) { + atomic_inc(&nr_counters); + if (counter->attr.mmap) + atomic_inc(&nr_mmap_counters); + if (counter->attr.comm) + atomic_inc(&nr_comm_counters); + } return counter; } @@ -3815,7 +4037,7 @@ SYSCALL_DEFINE5(perf_counter_open, } counter = perf_counter_alloc(&attr, cpu, ctx, group_leader, - GFP_KERNEL); + NULL, GFP_KERNEL); ret = PTR_ERR(counter); if (IS_ERR(counter)) goto err_put_context; @@ -3881,7 +4103,8 @@ inherit_counter(struct perf_counter *parent_counter, child_counter = perf_counter_alloc(&parent_counter->attr, parent_counter->cpu, child_ctx, - group_leader, GFP_KERNEL); + group_leader, parent_counter, + GFP_KERNEL); if (IS_ERR(child_counter)) return child_counter; get_ctx(child_ctx); @@ -3904,12 +4127,6 @@ inherit_counter(struct perf_counter *parent_counter, */ add_counter_to_ctx(child_counter, child_ctx); - child_counter->parent = parent_counter; - /* - * inherit into child's child as well: - */ - child_counter->attr.inherit = 1; - /* * Get a reference to the parent filp - we will fput it * when the child counter exits. This is safe to do because @@ -3953,10 +4170,14 @@ static int inherit_group(struct perf_counter *parent_counter, } static void sync_child_counter(struct perf_counter *child_counter, - struct perf_counter *parent_counter) + struct task_struct *child) { + struct perf_counter *parent_counter = child_counter->parent; u64 child_val; + if (child_counter->attr.inherit_stat) + perf_counter_read_event(child_counter, child); + child_val = atomic64_read(&child_counter->count); /* @@ -3985,7 +4206,8 @@ static void sync_child_counter(struct perf_counter *child_counter, static void __perf_counter_exit_task(struct perf_counter *child_counter, - struct perf_counter_context *child_ctx) + struct perf_counter_context *child_ctx, + struct task_struct *child) { struct perf_counter *parent_counter; @@ -3999,7 +4221,7 @@ __perf_counter_exit_task(struct perf_counter *child_counter, * counters need to be zapped - but otherwise linger. */ if (parent_counter) { - sync_child_counter(child_counter, parent_counter); + sync_child_counter(child_counter, child); free_counter(child_counter); } } @@ -4061,7 +4283,7 @@ void perf_counter_exit_task(struct task_struct *child) again: list_for_each_entry_safe(child_counter, tmp, &child_ctx->counter_list, list_entry) - __perf_counter_exit_task(child_counter, child_ctx); + __perf_counter_exit_task(child_counter, child_ctx, child); /* * If the last counter was a group counter, it will have appended all diff --git a/kernel/pid.c b/kernel/pid.c index 31310b5d3f5..5fa1db48d8b 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -36,6 +36,7 @@ #include <linux/pid_namespace.h> #include <linux/init_task.h> #include <linux/syscalls.h> +#include <linux/kmemleak.h> #define pid_hashfn(nr, ns) \ hash_long((unsigned long)nr + (unsigned long)ns, pidhash_shift) @@ -512,6 +513,12 @@ void __init pidhash_init(void) pid_hash = alloc_bootmem(pidhash_size * sizeof(*(pid_hash))); if (!pid_hash) panic("Could not alloc pidhash!\n"); + /* + * pid_hash contains references to allocated struct pid objects and it + * must be scanned by kmemleak to avoid false positives. + */ + kmemleak_alloc(pid_hash, pidhash_size * sizeof(*(pid_hash)), 0, + GFP_KERNEL); for (i = 0; i < pidhash_size; i++) INIT_HLIST_HEAD(&pid_hash[i]); } diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 61c78b2c07b..082c320e4db 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -181,8 +181,8 @@ int ptrace_attach(struct task_struct *task) * interference; SUID, SGID and LSM creds get determined differently * under ptrace. */ - retval = mutex_lock_interruptible(&task->cred_guard_mutex); - if (retval < 0) + retval = -ERESTARTNOINTR; + if (mutex_lock_interruptible(&task->cred_guard_mutex)) goto out; task_lock(task); diff --git a/kernel/resource.c b/kernel/resource.c index ac5f3a36923..78b087221c1 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -787,7 +787,7 @@ static int __init reserve_setup(char *str) static struct resource reserve[MAXRESERVE]; for (;;) { - int io_start, io_num; + unsigned int io_start, io_num; int x = reserved; if (get_option (&str, &io_start) != 2) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 62e4ff9968b..98e02328c67 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -335,7 +335,10 @@ static struct ctl_table kern_table[] = { .data = &sysctl_timer_migration, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &zero, + .extra2 = &one, }, #endif { @@ -744,6 +747,14 @@ static struct ctl_table kern_table[] = { .proc_handler = &proc_dointvec, }, { + .ctl_name = CTL_UNNUMBERED, + .procname = "panic_on_io_nmi", + .data = &panic_on_io_nmi, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, + { .ctl_name = KERN_BOOTLOADER_TYPE, .procname = "bootloader_type", .data = &bootloader_type, diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c index c994530d166..4cde8b9c716 100644 --- a/kernel/time/timer_stats.c +++ b/kernel/time/timer_stats.c @@ -96,7 +96,7 @@ static DEFINE_MUTEX(show_mutex); /* * Collection status, active/inactive: */ -static int __read_mostly active; +int __read_mostly timer_stats_active; /* * Beginning/end timestamps of measurement: @@ -242,7 +242,7 @@ void timer_stats_update_stats(void *timer, pid_t pid, void *startf, struct entry *entry, input; unsigned long flags; - if (likely(!active)) + if (likely(!timer_stats_active)) return; lock = &per_cpu(lookup_lock, raw_smp_processor_id()); @@ -254,7 +254,7 @@ void timer_stats_update_stats(void *timer, pid_t pid, void *startf, input.timer_flag = timer_flag; spin_lock_irqsave(lock, flags); - if (!active) + if (!timer_stats_active) goto out_unlock; entry = tstat_lookup(&input, comm); @@ -290,7 +290,7 @@ static int tstats_show(struct seq_file *m, void *v) /* * If still active then calculate up to now: */ - if (active) + if (timer_stats_active) time_stop = ktime_get(); time = ktime_sub(time_stop, time_start); @@ -368,18 +368,18 @@ static ssize_t tstats_write(struct file *file, const char __user *buf, mutex_lock(&show_mutex); switch (ctl[0]) { case '0': - if (active) { - active = 0; + if (timer_stats_active) { + timer_stats_active = 0; time_stop = ktime_get(); sync_access(); } break; case '1': - if (!active) { + if (!timer_stats_active) { reset_entries(); time_start = ktime_get(); smp_mb(); - active = 1; + timer_stats_active = 1; } break; default: diff --git a/kernel/timer.c b/kernel/timer.c index 54d3912f8ca..0b36b9e5cc8 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -380,6 +380,8 @@ static void timer_stats_account_timer(struct timer_list *timer) { unsigned int flag = 0; + if (likely(!timer->start_site)) + return; if (unlikely(tbase_get_deferrable(timer->base))) flag |= TIMER_STATS_FLAG_DEFERRABLE; diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 3718d55fb4c..f3716bf04df 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -291,7 +291,9 @@ function_stat_next(void *v, int idx) pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK); again: - rec++; + if (idx != 0) + rec++; + if ((void *)rec >= (void *)&pg->records[pg->index]) { pg = pg->next; if (!pg) @@ -1417,10 +1419,20 @@ static void *t_hash_start(struct seq_file *m, loff_t *pos) { struct ftrace_iterator *iter = m->private; void *p = NULL; + loff_t l; + + if (!(iter->flags & FTRACE_ITER_HASH)) + *pos = 0; iter->flags |= FTRACE_ITER_HASH; - return t_hash_next(m, p, pos); + iter->hidx = 0; + for (l = 0; l <= *pos; ) { + p = t_hash_next(m, p, &l); + if (!p) + break; + } + return p; } static int t_hash_show(struct seq_file *m, void *v) @@ -1467,8 +1479,6 @@ t_next(struct seq_file *m, void *v, loff_t *pos) iter->pg = iter->pg->next; iter->idx = 0; goto retry; - } else { - iter->idx = -1; } } else { rec = &iter->pg->records[iter->idx++]; @@ -1497,6 +1507,7 @@ static void *t_start(struct seq_file *m, loff_t *pos) { struct ftrace_iterator *iter = m->private; void *p = NULL; + loff_t l; mutex_lock(&ftrace_lock); /* @@ -1508,23 +1519,21 @@ static void *t_start(struct seq_file *m, loff_t *pos) if (*pos > 0) return t_hash_start(m, pos); iter->flags |= FTRACE_ITER_PRINTALL; - (*pos)++; return iter; } if (iter->flags & FTRACE_ITER_HASH) return t_hash_start(m, pos); - if (*pos > 0) { - if (iter->idx < 0) - return p; - (*pos)--; - iter->idx--; + iter->pg = ftrace_pages_start; + iter->idx = 0; + for (l = 0; l <= *pos; ) { + p = t_next(m, p, &l); + if (!p) + break; } - p = t_next(m, p, pos); - - if (!p) + if (!p && iter->flags & FTRACE_ITER_FILTER) return t_hash_start(m, pos); return p; @@ -2500,32 +2509,31 @@ int ftrace_graph_count; unsigned long ftrace_graph_funcs[FTRACE_GRAPH_MAX_FUNCS] __read_mostly; static void * -g_next(struct seq_file *m, void *v, loff_t *pos) +__g_next(struct seq_file *m, loff_t *pos) { unsigned long *array = m->private; - int index = *pos; - (*pos)++; - - if (index >= ftrace_graph_count) + if (*pos >= ftrace_graph_count) return NULL; + return &array[*pos]; +} - return &array[index]; +static void * +g_next(struct seq_file *m, void *v, loff_t *pos) +{ + (*pos)++; + return __g_next(m, pos); } static void *g_start(struct seq_file *m, loff_t *pos) { - void *p = NULL; - mutex_lock(&graph_lock); /* Nothing, tell g_show to print all functions are enabled */ if (!ftrace_graph_count && !*pos) return (void *)1; - p = g_next(m, p, pos); - - return p; + return __g_next(m, pos); } static void g_stop(struct seq_file *m, void *p) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 04dac263825..bf27bb7a63e 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1563,6 +1563,8 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer, return NULL; } +#ifdef CONFIG_TRACING + #define TRACE_RECURSIVE_DEPTH 16 static int trace_recursive_lock(void) @@ -1593,6 +1595,13 @@ static void trace_recursive_unlock(void) current->trace_recursion--; } +#else + +#define trace_recursive_lock() (0) +#define trace_recursive_unlock() do { } while (0) + +#endif + static DEFINE_PER_CPU(int, rb_need_resched); /** @@ -3104,6 +3113,7 @@ int ring_buffer_read_page(struct ring_buffer *buffer, } EXPORT_SYMBOL_GPL(ring_buffer_read_page); +#ifdef CONFIG_TRACING static ssize_t rb_simple_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) @@ -3171,6 +3181,7 @@ static __init int rb_init_debugfs(void) } fs_initcall(rb_init_debugfs); +#endif #ifdef CONFIG_HOTPLUG_CPU static int rb_cpu_notify(struct notifier_block *self, diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 076fa6f0ee4..3aa0a0dfdfa 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -284,13 +284,12 @@ void trace_wake_up(void) static int __init set_buf_size(char *str) { unsigned long buf_size; - int ret; if (!str) return 0; - ret = strict_strtoul(str, 0, &buf_size); + buf_size = memparse(str, &str); /* nr_entries can not be zero */ - if (ret < 0 || buf_size == 0) + if (buf_size == 0) return 0; trace_buf_size = buf_size; return 1; @@ -2053,25 +2052,23 @@ static int tracing_open(struct inode *inode, struct file *file) static void * t_next(struct seq_file *m, void *v, loff_t *pos) { - struct tracer *t = m->private; + struct tracer *t = v; (*pos)++; if (t) t = t->next; - m->private = t; - return t; } static void *t_start(struct seq_file *m, loff_t *pos) { - struct tracer *t = m->private; + struct tracer *t; loff_t l = 0; mutex_lock(&trace_types_lock); - for (; t && l < *pos; t = t_next(m, t, &l)) + for (t = trace_types; t && l < *pos; t = t_next(m, t, &l)) ; return t; @@ -2107,18 +2104,10 @@ static struct seq_operations show_traces_seq_ops = { static int show_traces_open(struct inode *inode, struct file *file) { - int ret; - if (tracing_disabled) return -ENODEV; - ret = seq_open(file, &show_traces_seq_ops); - if (!ret) { - struct seq_file *m = file->private_data; - m->private = trace_types; - } - - return ret; + return seq_open(file, &show_traces_seq_ops); } static ssize_t diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 6e735d4771f..3548ae5cc78 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -597,6 +597,7 @@ print_graph_function(struct trace_iterator *iter) extern struct pid *ftrace_pid_trace; +#ifdef CONFIG_FUNCTION_TRACER static inline int ftrace_trace_task(struct task_struct *task) { if (!ftrace_pid_trace) @@ -604,6 +605,12 @@ static inline int ftrace_trace_task(struct task_struct *task) return test_tsk_trace_trace(task); } +#else +static inline int ftrace_trace_task(struct task_struct *task) +{ + return 1; +} +#endif /* * trace_iterator_flags is an enumeration that defines bit diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index aa08be69a1b..53c8fd376a8 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -300,10 +300,18 @@ t_next(struct seq_file *m, void *v, loff_t *pos) static void *t_start(struct seq_file *m, loff_t *pos) { + struct ftrace_event_call *call = NULL; + loff_t l; + mutex_lock(&event_mutex); - if (*pos == 0) - m->private = ftrace_events.next; - return t_next(m, NULL, pos); + + m->private = ftrace_events.next; + for (l = 0; l <= *pos; ) { + call = t_next(m, NULL, &l); + if (!call) + break; + } + return call; } static void * @@ -332,10 +340,18 @@ s_next(struct seq_file *m, void *v, loff_t *pos) static void *s_start(struct seq_file *m, loff_t *pos) { + struct ftrace_event_call *call = NULL; + loff_t l; + mutex_lock(&event_mutex); - if (*pos == 0) - m->private = ftrace_events.next; - return s_next(m, NULL, pos); + + m->private = ftrace_events.next; + for (l = 0; l <= *pos; ) { + call = s_next(m, NULL, &l); + if (!call) + break; + } + return call; } static int t_show(struct seq_file *m, void *v) diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 90f13476483..7402144bff2 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -302,8 +302,7 @@ ftrace_trace_onoff_print(struct seq_file *m, unsigned long ip, if (count == -1) seq_printf(m, ":unlimited\n"); else - seq_printf(m, ":count=%ld", count); - seq_putc(m, '\n'); + seq_printf(m, ":count=%ld\n", count); return 0; } diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c index 9bece9687b6..7b627811082 100644 --- a/kernel/trace/trace_printk.c +++ b/kernel/trace/trace_printk.c @@ -155,25 +155,19 @@ int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap) EXPORT_SYMBOL_GPL(__ftrace_vprintk); static void * -t_next(struct seq_file *m, void *v, loff_t *pos) +t_start(struct seq_file *m, loff_t *pos) { - const char **fmt = m->private; - const char **next = fmt; - - (*pos)++; + const char **fmt = __start___trace_bprintk_fmt + *pos; if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt) return NULL; - - next = fmt; - m->private = ++next; - return fmt; } -static void *t_start(struct seq_file *m, loff_t *pos) +static void *t_next(struct seq_file *m, void * v, loff_t *pos) { - return t_next(m, NULL, pos); + (*pos)++; + return t_start(m, pos); } static int t_show(struct seq_file *m, void *v) @@ -224,15 +218,7 @@ static const struct seq_operations show_format_seq_ops = { static int ftrace_formats_open(struct inode *inode, struct file *file) { - int ret; - - ret = seq_open(file, &show_format_seq_ops); - if (!ret) { - struct seq_file *m = file->private_data; - - m->private = __start___trace_bprintk_fmt; - } - return ret; + return seq_open(file, &show_format_seq_ops); } static const struct file_operations ftrace_formats_fops = { diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c index c00643733f4..e66f5e49334 100644 --- a/kernel/trace/trace_stat.c +++ b/kernel/trace/trace_stat.c @@ -199,17 +199,13 @@ static void *stat_seq_start(struct seq_file *s, loff_t *pos) mutex_lock(&session->stat_mutex); /* If we are in the beginning of the file, print the headers */ - if (!*pos && session->ts->stat_headers) { - (*pos)++; + if (!*pos && session->ts->stat_headers) return SEQ_START_TOKEN; - } node = rb_first(&session->stat_root); for (i = 0; node && i < *pos; i++) node = rb_next(node); - (*pos)++; - return node; } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4c32b1a1a06..12327b2bb78 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -359,6 +359,18 @@ config DEBUG_KMEMLEAK In order to access the kmemleak file, debugfs needs to be mounted (usually at /sys/kernel/debug). +config DEBUG_KMEMLEAK_EARLY_LOG_SIZE + int "Maximum kmemleak early log entries" + depends on DEBUG_KMEMLEAK + range 200 2000 + default 400 + help + Kmemleak must track all the memory allocations to avoid + reporting false positives. Since memory may be allocated or + freed before kmemleak is initialised, an early log buffer is + used to store these actions. If kmemleak reports "early log + buffer exceeded", please increase this value. + config DEBUG_KMEMLEAK_TEST tristate "Simple test for the kernel memory leak detector" depends on DEBUG_KMEMLEAK diff --git a/mm/dmapool.c b/mm/dmapool.c index b1f0885dda2..3df063706f5 100644 --- a/mm/dmapool.c +++ b/mm/dmapool.c @@ -86,10 +86,12 @@ show_pools(struct device *dev, struct device_attribute *attr, char *buf) unsigned pages = 0; unsigned blocks = 0; + spin_lock_irq(&pool->lock); list_for_each_entry(page, &pool->page_list, page_list) { pages++; blocks += page->in_use; } + spin_unlock_irq(&pool->lock); /* per-pool info, no real statistics yet */ temp = scnprintf(next, size, "%-16s %4u %4Zu %4Zu %2u\n", diff --git a/mm/filemap.c b/mm/filemap.c index 22396713feb..ccea3b665c1 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2272,6 +2272,7 @@ again: pagefault_enable(); flush_dcache_page(page); + mark_page_accessed(page); status = a_ops->write_end(file, mapping, pos, bytes, copied, page, fsdata); if (unlikely(status < 0)) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index c96f2c8700a..e766e1da09d 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -48,10 +48,10 @@ * scanned. This list is only modified during a scanning episode when the * scan_mutex is held. At the end of a scan, the gray_list is always empty. * Note that the kmemleak_object.use_count is incremented when an object is - * added to the gray_list and therefore cannot be freed - * - kmemleak_mutex (mutex): prevents multiple users of the "kmemleak" debugfs - * file together with modifications to the memory scanning parameters - * including the scan_thread pointer + * added to the gray_list and therefore cannot be freed. This mutex also + * prevents multiple users of the "kmemleak" debugfs file together with + * modifications to the memory scanning parameters including the scan_thread + * pointer * * The kmemleak_object structures have a use_count incremented or decremented * using the get_object()/put_object() functions. When the use_count becomes @@ -105,7 +105,6 @@ #define MAX_TRACE 16 /* stack trace length */ #define REPORTS_NR 50 /* maximum number of reported leaks */ #define MSECS_MIN_AGE 5000 /* minimum object age for reporting */ -#define MSECS_SCAN_YIELD 10 /* CPU yielding period */ #define SECS_FIRST_SCAN 60 /* delay before the first scan */ #define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */ @@ -186,19 +185,16 @@ static atomic_t kmemleak_error = ATOMIC_INIT(0); static unsigned long min_addr = ULONG_MAX; static unsigned long max_addr; -/* used for yielding the CPU to other tasks during scanning */ -static unsigned long next_scan_yield; static struct task_struct *scan_thread; -static unsigned long jiffies_scan_yield; +/* used to avoid reporting of recently allocated objects */ static unsigned long jiffies_min_age; +static unsigned long jiffies_last_scan; /* delay between automatic memory scannings */ static signed long jiffies_scan_wait; /* enables or disables the task stacks scanning */ -static int kmemleak_stack_scan; -/* mutex protecting the memory scanning */ +static int kmemleak_stack_scan = 1; +/* protects the memory scanning, parameters and debug/kmemleak file access */ static DEFINE_MUTEX(scan_mutex); -/* mutex protecting the access to the /sys/kernel/debug/kmemleak file */ -static DEFINE_MUTEX(kmemleak_mutex); /* number of leaks reported (for limitation purposes) */ static int reported_leaks; @@ -235,7 +231,7 @@ struct early_log { }; /* early logging buffer and current position */ -static struct early_log early_log[200]; +static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE]; static int crt_early_log; static void kmemleak_disable(void); @@ -279,15 +275,6 @@ static int color_gray(const struct kmemleak_object *object) } /* - * Objects are considered referenced if their color is gray and they have not - * been deleted. - */ -static int referenced_object(struct kmemleak_object *object) -{ - return (object->flags & OBJECT_ALLOCATED) && color_gray(object); -} - -/* * Objects are considered unreferenced only if their color is white, they have * not be deleted and have a minimum age to avoid false positives caused by * pointers temporarily stored in CPU registers. @@ -295,42 +282,28 @@ static int referenced_object(struct kmemleak_object *object) static int unreferenced_object(struct kmemleak_object *object) { return (object->flags & OBJECT_ALLOCATED) && color_white(object) && - time_is_before_eq_jiffies(object->jiffies + jiffies_min_age); + time_before_eq(object->jiffies + jiffies_min_age, + jiffies_last_scan); } /* - * Printing of the (un)referenced objects information, either to the seq file - * or to the kernel log. The print_referenced/print_unreferenced functions - * must be called with the object->lock held. + * Printing of the unreferenced objects information to the seq file. The + * print_unreferenced function must be called with the object->lock held. */ -#define print_helper(seq, x...) do { \ - struct seq_file *s = (seq); \ - if (s) \ - seq_printf(s, x); \ - else \ - pr_info(x); \ -} while (0) - -static void print_referenced(struct kmemleak_object *object) -{ - pr_info("referenced object 0x%08lx (size %zu)\n", - object->pointer, object->size); -} - static void print_unreferenced(struct seq_file *seq, struct kmemleak_object *object) { int i; - print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n", - object->pointer, object->size); - print_helper(seq, " comm \"%s\", pid %d, jiffies %lu\n", - object->comm, object->pid, object->jiffies); - print_helper(seq, " backtrace:\n"); + seq_printf(seq, "unreferenced object 0x%08lx (size %zu):\n", + object->pointer, object->size); + seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu\n", + object->comm, object->pid, object->jiffies); + seq_printf(seq, " backtrace:\n"); for (i = 0; i < object->trace_len; i++) { void *ptr = (void *)object->trace[i]; - print_helper(seq, " [<%p>] %pS\n", ptr, ptr); + seq_printf(seq, " [<%p>] %pS\n", ptr, ptr); } } @@ -554,8 +527,10 @@ static void delete_object(unsigned long ptr) write_lock_irqsave(&kmemleak_lock, flags); object = lookup_object(ptr, 0); if (!object) { +#ifdef DEBUG kmemleak_warn("Freeing unknown object at 0x%08lx\n", ptr); +#endif write_unlock_irqrestore(&kmemleak_lock, flags); return; } @@ -571,8 +546,6 @@ static void delete_object(unsigned long ptr) * cannot be freed when it is being scanned. */ spin_lock_irqsave(&object->lock, flags); - if (object->flags & OBJECT_REPORTED) - print_referenced(object); object->flags &= ~OBJECT_ALLOCATED; spin_unlock_irqrestore(&object->lock, flags); put_object(object); @@ -696,7 +669,8 @@ static void log_early(int op_type, const void *ptr, size_t size, struct early_log *log; if (crt_early_log >= ARRAY_SIZE(early_log)) { - kmemleak_stop("Early log buffer exceeded\n"); + pr_warning("Early log buffer exceeded\n"); + kmemleak_disable(); return; } @@ -808,21 +782,6 @@ void kmemleak_no_scan(const void *ptr) EXPORT_SYMBOL(kmemleak_no_scan); /* - * Yield the CPU so that other tasks get a chance to run. The yielding is - * rate-limited to avoid excessive number of calls to the schedule() function - * during memory scanning. - */ -static void scan_yield(void) -{ - might_sleep(); - - if (time_is_before_eq_jiffies(next_scan_yield)) { - schedule(); - next_scan_yield = jiffies + jiffies_scan_yield; - } -} - -/* * Memory scanning is a long process and it needs to be interruptable. This * function checks whether such interrupt condition occured. */ @@ -862,15 +821,6 @@ static void scan_block(void *_start, void *_end, if (scan_should_stop()) break; - /* - * When scanning a memory block with a corresponding - * kmemleak_object, the CPU yielding is handled in the calling - * code since it holds the object->lock to avoid the block - * freeing. - */ - if (!scanned) - scan_yield(); - object = find_and_get_object(pointer, 1); if (!object) continue; @@ -952,6 +902,9 @@ static void kmemleak_scan(void) struct kmemleak_object *object, *tmp; struct task_struct *task; int i; + int new_leaks = 0; + + jiffies_last_scan = jiffies; /* prepare the kmemleak_object's */ rcu_read_lock(); @@ -1033,7 +986,7 @@ static void kmemleak_scan(void) */ object = list_entry(gray_list.next, typeof(*object), gray_list); while (&object->gray_list != &gray_list) { - scan_yield(); + cond_resched(); /* may add new objects to the list */ if (!scan_should_stop()) @@ -1049,6 +1002,32 @@ static void kmemleak_scan(void) object = tmp; } WARN_ON(!list_empty(&gray_list)); + + /* + * If scanning was stopped do not report any new unreferenced objects. + */ + if (scan_should_stop()) + return; + + /* + * Scanning result reporting. + */ + rcu_read_lock(); + list_for_each_entry_rcu(object, &object_list, object_list) { + spin_lock_irqsave(&object->lock, flags); + if (unreferenced_object(object) && + !(object->flags & OBJECT_REPORTED)) { + object->flags |= OBJECT_REPORTED; + new_leaks++; + } + spin_unlock_irqrestore(&object->lock, flags); + } + rcu_read_unlock(); + + if (new_leaks) + pr_info("%d new suspected memory leaks (see " + "/sys/kernel/debug/kmemleak)\n", new_leaks); + } /* @@ -1070,36 +1049,12 @@ static int kmemleak_scan_thread(void *arg) } while (!kthread_should_stop()) { - struct kmemleak_object *object; signed long timeout = jiffies_scan_wait; mutex_lock(&scan_mutex); - kmemleak_scan(); - reported_leaks = 0; - - rcu_read_lock(); - list_for_each_entry_rcu(object, &object_list, object_list) { - unsigned long flags; - - if (reported_leaks >= REPORTS_NR) - break; - spin_lock_irqsave(&object->lock, flags); - if (!(object->flags & OBJECT_REPORTED) && - unreferenced_object(object)) { - print_unreferenced(NULL, object); - object->flags |= OBJECT_REPORTED; - reported_leaks++; - } else if ((object->flags & OBJECT_REPORTED) && - referenced_object(object)) { - print_referenced(object); - object->flags &= ~OBJECT_REPORTED; - } - spin_unlock_irqrestore(&object->lock, flags); - } - rcu_read_unlock(); - mutex_unlock(&scan_mutex); + /* wait before the next scan */ while (timeout && !kthread_should_stop()) timeout = schedule_timeout_interruptible(timeout); @@ -1112,7 +1067,7 @@ static int kmemleak_scan_thread(void *arg) /* * Start the automatic memory scanning thread. This function must be called - * with the kmemleak_mutex held. + * with the scan_mutex held. */ void start_scan_thread(void) { @@ -1127,7 +1082,7 @@ void start_scan_thread(void) /* * Stop the automatic memory scanning thread. This function must be called - * with the kmemleak_mutex held. + * with the scan_mutex held. */ void stop_scan_thread(void) { @@ -1147,10 +1102,8 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos) struct kmemleak_object *object; loff_t n = *pos; - if (!n) { - kmemleak_scan(); + if (!n) reported_leaks = 0; - } if (reported_leaks >= REPORTS_NR) return NULL; @@ -1211,11 +1164,10 @@ static int kmemleak_seq_show(struct seq_file *seq, void *v) unsigned long flags; spin_lock_irqsave(&object->lock, flags); - if (!unreferenced_object(object)) - goto out; - print_unreferenced(seq, object); - reported_leaks++; -out: + if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object)) { + print_unreferenced(seq, object); + reported_leaks++; + } spin_unlock_irqrestore(&object->lock, flags); return 0; } @@ -1234,13 +1186,10 @@ static int kmemleak_open(struct inode *inode, struct file *file) if (!atomic_read(&kmemleak_enabled)) return -EBUSY; - ret = mutex_lock_interruptible(&kmemleak_mutex); + ret = mutex_lock_interruptible(&scan_mutex); if (ret < 0) goto out; if (file->f_mode & FMODE_READ) { - ret = mutex_lock_interruptible(&scan_mutex); - if (ret < 0) - goto kmemleak_unlock; ret = seq_open(file, &kmemleak_seq_ops); if (ret < 0) goto scan_unlock; @@ -1249,8 +1198,6 @@ static int kmemleak_open(struct inode *inode, struct file *file) scan_unlock: mutex_unlock(&scan_mutex); -kmemleak_unlock: - mutex_unlock(&kmemleak_mutex); out: return ret; } @@ -1259,11 +1206,9 @@ static int kmemleak_release(struct inode *inode, struct file *file) { int ret = 0; - if (file->f_mode & FMODE_READ) { + if (file->f_mode & FMODE_READ) seq_release(inode, file); - mutex_unlock(&scan_mutex); - } - mutex_unlock(&kmemleak_mutex); + mutex_unlock(&scan_mutex); return ret; } @@ -1278,6 +1223,7 @@ static int kmemleak_release(struct inode *inode, struct file *file) * scan=off - stop the automatic memory scanning thread * scan=... - set the automatic memory scanning period in seconds (0 to * disable it) + * scan - trigger a memory scan */ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, size_t size, loff_t *ppos) @@ -1315,7 +1261,9 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf, jiffies_scan_wait = msecs_to_jiffies(secs * 1000); start_scan_thread(); } - } else + } else if (strncmp(buf, "scan", 4) == 0) + kmemleak_scan(); + else return -EINVAL; /* ignore the rest of the buffer, only one command at a time */ @@ -1340,11 +1288,9 @@ static int kmemleak_cleanup_thread(void *arg) { struct kmemleak_object *object; - mutex_lock(&kmemleak_mutex); + mutex_lock(&scan_mutex); stop_scan_thread(); - mutex_unlock(&kmemleak_mutex); - mutex_lock(&scan_mutex); rcu_read_lock(); list_for_each_entry_rcu(object, &object_list, object_list) delete_object(object->pointer); @@ -1411,7 +1357,6 @@ void __init kmemleak_init(void) int i; unsigned long flags; - jiffies_scan_yield = msecs_to_jiffies(MSECS_SCAN_YIELD); jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE); jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000); @@ -1486,9 +1431,9 @@ static int __init kmemleak_late_init(void) &kmemleak_fops); if (!dentry) pr_warning("Failed to create the debugfs kmemleak file\n"); - mutex_lock(&kmemleak_mutex); + mutex_lock(&scan_mutex); start_scan_thread(); - mutex_unlock(&kmemleak_mutex); + mutex_unlock(&scan_mutex); pr_info("Kernel memory leak detector initialized\n"); diff --git a/mm/memory.c b/mm/memory.c index f46ac18ba23..65216194eb8 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1207,8 +1207,8 @@ static inline int use_zero_page(struct vm_area_struct *vma) int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, - unsigned long start, int len, int flags, - struct page **pages, struct vm_area_struct **vmas) + unsigned long start, int nr_pages, int flags, + struct page **pages, struct vm_area_struct **vmas) { int i; unsigned int vm_flags = 0; @@ -1217,7 +1217,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS); int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL); - if (len <= 0) + if (nr_pages <= 0) return 0; /* * Require read or write permissions. @@ -1269,7 +1269,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, vmas[i] = gate_vma; i++; start += PAGE_SIZE; - len--; + nr_pages--; continue; } @@ -1280,7 +1280,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, if (is_vm_hugetlb_page(vma)) { i = follow_hugetlb_page(mm, vma, pages, vmas, - &start, &len, i, write); + &start, &nr_pages, i, write); continue; } @@ -1357,9 +1357,9 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, vmas[i] = vma; i++; start += PAGE_SIZE; - len--; - } while (len && start < vma->vm_end); - } while (len); + nr_pages--; + } while (nr_pages && start < vma->vm_end); + } while (nr_pages); return i; } @@ -1368,7 +1368,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, * @tsk: task_struct of target task * @mm: mm_struct of target mm * @start: starting user address - * @len: number of pages from start to pin + * @nr_pages: number of pages from start to pin * @write: whether pages will be written to by the caller * @force: whether to force write access even if user mapping is * readonly. This will result in the page being COWed even @@ -1380,7 +1380,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, * Or NULL if the caller does not require them. * * Returns number of pages pinned. This may be fewer than the number - * requested. If len is 0 or negative, returns 0. If no pages + * requested. If nr_pages is 0 or negative, returns 0. If no pages * were pinned, returns -errno. Each page returned must be released * with a put_page() call when it is finished with. vmas will only * remain valid while mmap_sem is held. @@ -1414,7 +1414,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, * See also get_user_pages_fast, for performance critical applications. */ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, - unsigned long start, int len, int write, int force, + unsigned long start, int nr_pages, int write, int force, struct page **pages, struct vm_area_struct **vmas) { int flags = 0; @@ -1424,9 +1424,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, if (force) flags |= GUP_FLAGS_FORCE; - return __get_user_pages(tsk, mm, - start, len, flags, - pages, vmas); + return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas); } EXPORT_SYMBOL(get_user_pages); diff --git a/mm/nommu.c b/mm/nommu.c index 2fd2ad5da98..53cab10fece 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -173,8 +173,8 @@ unsigned int kobjsize(const void *objp) } int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, - unsigned long start, int len, int flags, - struct page **pages, struct vm_area_struct **vmas) + unsigned long start, int nr_pages, int flags, + struct page **pages, struct vm_area_struct **vmas) { struct vm_area_struct *vma; unsigned long vm_flags; @@ -189,7 +189,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm, vm_flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD); vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE); - for (i = 0; i < len; i++) { + for (i = 0; i < nr_pages; i++) { vma = find_vma(mm, start); if (!vma) goto finish_or_fault; @@ -224,7 +224,7 @@ finish_or_fault: * - don't permit access to VMAs that don't support it, such as I/O mappings */ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, - unsigned long start, int len, int write, int force, + unsigned long start, int nr_pages, int write, int force, struct page **pages, struct vm_area_struct **vmas) { int flags = 0; @@ -234,12 +234,31 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, if (force) flags |= GUP_FLAGS_FORCE; - return __get_user_pages(tsk, mm, - start, len, flags, - pages, vmas); + return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas); } EXPORT_SYMBOL(get_user_pages); +/** + * follow_pfn - look up PFN at a user virtual address + * @vma: memory mapping + * @address: user virtual address + * @pfn: location to store found PFN + * + * Only IO mappings and raw PFN mappings are allowed. + * + * Returns zero and the pfn at @pfn on success, -ve otherwise. + */ +int follow_pfn(struct vm_area_struct *vma, unsigned long address, + unsigned long *pfn) +{ + if (!(vma->vm_flags & (VM_IO | VM_PFNMAP))) + return -EINVAL; + + *pfn = address >> PAGE_SHIFT; + return 0; +} +EXPORT_SYMBOL(follow_pfn); + DEFINE_RWLOCK(vmlist_lock); struct vm_struct *vmlist; diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 7b0dcea4935..7687879253b 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -541,8 +541,11 @@ static void balance_dirty_pages(struct address_space *mapping) * filesystems (i.e. NFS) in which data may have been * written to the server's write cache, but has not yet * been flushed to permanent storage. + * Only move pages to writeback if this bdi is over its + * threshold otherwise wait until the disk writes catch + * up. */ - if (bdi_nr_reclaimable) { + if (bdi_nr_reclaimable > bdi_thresh) { writeback_inodes(&wbc); pages_written += write_chunk - wbc.nr_to_write; get_dirty_limits(&background_thresh, &dirty_thresh, diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5d714f8fb30..ad7cd1c56b0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1983,7 +1983,7 @@ void *alloc_pages_exact(size_t size, gfp_t gfp_mask) unsigned long alloc_end = addr + (PAGE_SIZE << order); unsigned long used = addr + PAGE_ALIGN(size); - split_page(virt_to_page(addr), order); + split_page(virt_to_page((void *)addr), order); while (used < alloc_end) { free_page(used); used += PAGE_SIZE; @@ -4032,6 +4032,8 @@ static void __init find_zone_movable_pfns_for_nodes(unsigned long *movable_pfn) int i, nid; unsigned long usable_startpfn; unsigned long kernelcore_node, kernelcore_remaining; + /* save the state before borrow the nodemask */ + nodemask_t saved_node_state = node_states[N_HIGH_MEMORY]; unsigned long totalpages = early_calculate_totalpages(); int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]); @@ -4059,7 +4061,7 @@ static void __init find_zone_movable_pfns_for_nodes(unsigned long *movable_pfn) /* If kernelcore was not specified, there is no ZONE_MOVABLE */ if (!required_kernelcore) - return; + goto out; /* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */ find_usable_zone_for_movable(); @@ -4158,6 +4160,10 @@ restart: for (nid = 0; nid < MAX_NUMNODES; nid++) zone_movable_pfn[nid] = roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES); + +out: + /* restore the node_state */ + node_states[N_HIGH_MEMORY] = saved_node_state; } /* Any regular memory on that node ? */ @@ -4242,11 +4248,6 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn) early_node_map[i].start_pfn, early_node_map[i].end_pfn); - /* - * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init - * that node_mask, clear it at first - */ - nodes_clear(node_states[N_HIGH_MEMORY]); /* Initialise every node */ mminit_verify_pageflags_layout(); setup_nr_node_ids(); diff --git a/mm/percpu.c b/mm/percpu.c index c0b2c1a76e8..b70f2acd885 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -549,14 +549,14 @@ static void pcpu_free_area(struct pcpu_chunk *chunk, int freeme) * @chunk: chunk of interest * @page_start: page index of the first page to unmap * @page_end: page index of the last page to unmap + 1 - * @flush: whether to flush cache and tlb or not + * @flush_tlb: whether to flush tlb or not * * For each cpu, unmap pages [@page_start,@page_end) out of @chunk. * If @flush is true, vcache is flushed before unmapping and tlb * after. */ static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end, - bool flush) + bool flush_tlb) { unsigned int last = num_possible_cpus() - 1; unsigned int cpu; @@ -569,9 +569,8 @@ static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end, * the whole region at once rather than doing it for each cpu. * This could be an overkill but is more scalable. */ - if (flush) - flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start), - pcpu_chunk_addr(chunk, last, page_end)); + flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start), + pcpu_chunk_addr(chunk, last, page_end)); for_each_possible_cpu(cpu) unmap_kernel_range_noflush( @@ -579,7 +578,7 @@ static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end, (page_end - page_start) << PAGE_SHIFT); /* ditto as flush_cache_vunmap() */ - if (flush) + if (flush_tlb) flush_tlb_kernel_range(pcpu_chunk_addr(chunk, 0, page_start), pcpu_chunk_addr(chunk, last, page_end)); } @@ -1234,6 +1233,7 @@ static struct page * __init pcpue_get_page(unsigned int cpu, int pageno) ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size, ssize_t dyn_size, ssize_t unit_size) { + size_t chunk_size; unsigned int cpu; /* determine parameters and allocate */ @@ -1248,11 +1248,15 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size, } else pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE); - pcpue_ptr = __alloc_bootmem_nopanic( - num_possible_cpus() * pcpue_unit_size, - PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); - if (!pcpue_ptr) + chunk_size = pcpue_unit_size * num_possible_cpus(); + + pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE, + __pa(MAX_DMA_ADDRESS)); + if (!pcpue_ptr) { + pr_warning("PERCPU: failed to allocate %zu bytes for " + "embedding\n", chunk_size); return -ENOMEM; + } /* return the leftover and copy */ for_each_possible_cpu(cpu) { diff --git a/mm/slab.c b/mm/slab.c index e74a16e4ced..7b5d4deacfc 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1544,9 +1544,6 @@ void __init kmem_cache_init(void) } g_cpucache_up = EARLY; - - /* Annotate slab for lockdep -- annotate the malloc caches */ - init_lock_keys(); } void __init kmem_cache_init_late(void) @@ -1563,6 +1560,9 @@ void __init kmem_cache_init_late(void) /* Done! */ g_cpucache_up = FULL; + /* Annotate slab for lockdep -- annotate the malloc caches */ + init_lock_keys(); + /* * Register a cpu startup notifier callback that initializes * cpu_cache_get for all new cpus @@ -2547,7 +2547,7 @@ void kmem_cache_destroy(struct kmem_cache *cachep) } if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU)) - synchronize_rcu(); + rcu_barrier(); __kmem_cache_destroy(cachep); mutex_unlock(&cache_chain_mutex); diff --git a/mm/slob.c b/mm/slob.c index c78742defdc..9641da3d5e5 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -595,6 +595,8 @@ EXPORT_SYMBOL(kmem_cache_create); void kmem_cache_destroy(struct kmem_cache *c) { kmemleak_free(c); + if (c->flags & SLAB_DESTROY_BY_RCU) + rcu_barrier(); slob_free(c, sizeof(struct kmem_cache)); } EXPORT_SYMBOL(kmem_cache_destroy); diff --git a/mm/slub.c b/mm/slub.c index 819f056b39c..a9201d83178 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2595,6 +2595,8 @@ static inline int kmem_cache_close(struct kmem_cache *s) */ void kmem_cache_destroy(struct kmem_cache *s) { + if (s->flags & SLAB_DESTROY_BY_RCU) + rcu_barrier(); down_write(&slub_lock); s->refcount--; if (!s->refcount) { diff --git a/scripts/.gitignore b/scripts/.gitignore index b939fbd0119..52cab46ae35 100644 --- a/scripts/.gitignore +++ b/scripts/.gitignore @@ -7,3 +7,4 @@ pnmtologo bin2c unifdef binoffset +ihex2fw diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore new file mode 100644 index 00000000000..095acb49a37 --- /dev/null +++ b/scripts/dtc/.gitignore @@ -0,0 +1,5 @@ +dtc +dtc-lexer.lex.c +dtc-parser.tab.c +dtc-parser.tab.h + diff --git a/scripts/kernel-doc b/scripts/kernel-doc index ed591e9b7d1..b52d340d759 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1426,6 +1426,8 @@ sub dump_struct($$) { # strip comments: $members =~ s/\/\*.*?\*\///gos; $nested =~ s/\/\*.*?\*\///gos; + # strip kmemcheck_bitfield_{begin,end}.*; + $members =~ s/kmemcheck_bitfield_.*?;//gos; create_parameterlist($members, ';', $file); check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested); @@ -1468,8 +1470,6 @@ sub dump_enum($$) { } } - # strip kmemcheck_bitfield_{begin,end}.*; - $members =~ s/kmemcheck_bitfield_.*?;//gos; output_declaration($declaration_name, 'enum', diff --git a/scripts/package/builddeb b/scripts/package/builddeb index 01c2d13dd02..b19f1f4962e 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -16,6 +16,8 @@ create_package() { local pname="$1" pdir="$2" cp debian/copyright "$pdir/usr/share/doc/$pname/" + cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian" + gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian" # Fix ownership and permissions chown -R root:root "$pdir" diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c index 64f5ddb09ea..5c113123ed9 100644 --- a/scripts/pnmtologo.c +++ b/scripts/pnmtologo.c @@ -237,7 +237,7 @@ static void write_header(void) fprintf(out, " * Linux logo %s\n", logoname); fputs(" */\n\n", out); fputs("#include <linux/linux_logo.h>\n\n", out); - fprintf(out, "static const unsigned char %s_data[] __initconst = {\n", + fprintf(out, "static unsigned char %s_data[] __initdata = {\n", logoname); } @@ -374,7 +374,7 @@ static void write_logo_clut224(void) fputs("\n};\n\n", out); /* write logo clut */ - fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n", + fprintf(out, "static unsigned char %s_clut[] __initdata = {\n", logoname); write_hex_cnt = 0; for (i = 0; i < logo_clutsize; i++) { diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 6f611874d10..101c512564e 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -238,7 +238,34 @@ out: } /* - * ima_opens_get - increment file counts + * ima_counts_put - decrement file counts + * + * File counts are incremented in ima_path_check. On file open + * error, such as ETXTBSY, decrement the counts to prevent + * unnecessary imbalance messages. + */ +void ima_counts_put(struct path *path, int mask) +{ + struct inode *inode = path->dentry->d_inode; + struct ima_iint_cache *iint; + + if (!ima_initialized || !S_ISREG(inode->i_mode)) + return; + iint = ima_iint_find_insert_get(inode); + if (!iint) + return; + + mutex_lock(&iint->mutex); + iint->opencount--; + if ((mask & MAY_WRITE) || (mask == 0)) + iint->writecount--; + else if (mask & (MAY_READ | MAY_EXEC)) + iint->readcount--; + mutex_unlock(&iint->mutex); +} + +/* + * ima_counts_get - increment file counts * * - for IPC shm and shmat file. * - for nfsd exported files. diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c index 7ec94314ac0..a0880e9c8e0 100644 --- a/security/integrity/ima/ima_queue.c +++ b/security/integrity/ima/ima_queue.c @@ -134,7 +134,8 @@ int ima_add_template_entry(struct ima_template_entry *entry, int violation, } out: mutex_unlock(&ima_extend_list_mutex); - integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, entry->template_name, + integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, + entry->template.file_name, op, audit_cause, result, audit_info); return result; } diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index de83608719e..3ee0269e5bd 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -338,7 +338,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, return -EBUSY; acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL); - if (acard->play == NULL) + if (acard->mpu == NULL) return -EBUSY; pdev = acard->cap; diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c index c180598f171..89466b056be 100644 --- a/sound/oss/kahlua.c +++ b/sound/oss/kahlua.c @@ -199,7 +199,7 @@ MODULE_LICENSE("GPL"); */ static struct pci_device_id id_tbl[] = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 }, { } }; diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c index 6c0a770ed05..1b2316f35b1 100644 --- a/sound/oss/mpu401.c +++ b/sound/oss/mpu401.c @@ -926,31 +926,21 @@ static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV]; static void mpu401_chk_version(int n, struct mpu_config *devc) { int tmp; - unsigned long flags; devc->version = devc->revision = 0; - spin_lock_irqsave(&devc->lock,flags); - if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0) - { - spin_unlock_irqrestore(&devc->lock,flags); + tmp = mpu_cmd(n, 0xAC, 0); + if (tmp < 0) return; - } if ((tmp & 0xf0) > 0x20) /* Why it's larger than 2.x ??? */ - { - spin_unlock_irqrestore(&devc->lock,flags); return; - } devc->version = tmp; - if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) - { + if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) { devc->version = 0; - spin_unlock_irqrestore(&devc->lock,flags); return; } devc->revision = tmp; - spin_unlock_irqrestore(&devc->lock,flags); } int attach_mpu401(struct address_info *hw_config, struct module *owner) diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index 71515ddb459..d6752dff2a4 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -287,10 +287,10 @@ struct atiixp { /* */ static struct pci_device_id snd_atiixp_ids[] = { - { 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */ - { 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */ - { 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */ - { 0x1002, 0x4382, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB600 */ + { PCI_VDEVICE(ATI, 0x4341), 0 }, /* SB200 */ + { PCI_VDEVICE(ATI, 0x4361), 0 }, /* SB300 */ + { PCI_VDEVICE(ATI, 0x4370), 0 }, /* SB400 */ + { PCI_VDEVICE(ATI, 0x4382), 0 }, /* SB600 */ { 0, } }; diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c index c3136cccc55..e7e147bf8eb 100644 --- a/sound/pci/atiixp_modem.c +++ b/sound/pci/atiixp_modem.c @@ -262,8 +262,8 @@ struct atiixp_modem { /* */ static struct pci_device_id snd_atiixp_ids[] = { - { 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */ - { 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */ + { PCI_VDEVICE(ATI, 0x434d), 0 }, /* SB200 */ + { PCI_VDEVICE(ATI, 0x4378), 0 }, /* SB400 */ { 0, } }; diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c index fce22c7af0e..c0e8c6b295c 100644 --- a/sound/pci/au88x0/au8810.c +++ b/sound/pci/au88x0/au8810.c @@ -1,8 +1,7 @@ #include "au8810.h" #include "au88x0.h" static struct pci_device_id snd_vortex_ids[] = { - {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,}, + {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE), 1,}, {0,} }; diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c index d1fbcce0725..a6527330df5 100644 --- a/sound/pci/au88x0/au8820.c +++ b/sound/pci/au88x0/au8820.c @@ -1,8 +1,7 @@ #include "au8820.h" #include "au88x0.h" static struct pci_device_id snd_vortex_ids[] = { - {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, + {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1), 0,}, {0,} }; diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c index d4f2717c14f..6c702ad4352 100644 --- a/sound/pci/au88x0/au8830.c +++ b/sound/pci/au88x0/au8830.c @@ -1,8 +1,7 @@ #include "au8830.h" #include "au88x0.h" static struct pci_device_id snd_vortex_ids[] = { - {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, + {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2), 0,}, {0,} }; diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 57b992a5c05..f24bf1ecb36 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -1876,7 +1876,7 @@ static int snd_ca0106_resume(struct pci_dev *pci) // PCI IDs static struct pci_device_id snd_ca0106_ids[] = { - { 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Audigy LS or Live 24bit */ + { PCI_VDEVICE(CREATIVE, 0x0007), 0 }, /* Audigy LS or Live 24bit */ { 0, } }; MODULE_DEVICE_TABLE(pci, snd_ca0106_ids); diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index 449fe02f666..ddcd4a9fd7e 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -2797,11 +2797,11 @@ static inline void snd_cmipci_proc_init(struct cmipci *cm) {} static struct pci_device_id snd_cmipci_ids[] = { - {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_AL, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A), 0}, + {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B), 0}, + {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738), 0}, + {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B), 0}, + {PCI_VDEVICE(AL, PCI_DEVICE_ID_CMEDIA_CM8738), 0}, {0,}, }; diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c index f6286f84a22..e2e0359bb05 100644 --- a/sound/pci/cs4281.c +++ b/sound/pci/cs4281.c @@ -495,7 +495,7 @@ struct cs4281 { static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id); static struct pci_device_id snd_cs4281_ids[] = { - { 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4281 */ + { PCI_VDEVICE(CIRRUS, 0x6005), 0, }, /* CS4281 */ { 0, } }; diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c index c9b3e3d48cb..033aec43011 100644 --- a/sound/pci/cs46xx/cs46xx.c +++ b/sound/pci/cs46xx/cs46xx.c @@ -65,9 +65,9 @@ module_param_array(mmap_valid, bool, NULL, 0444); MODULE_PARM_DESC(mmap_valid, "Support OSS mmap."); static struct pci_device_id snd_cs46xx_ids[] = { - { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4280 */ - { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4612 */ - { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4615 */ + { PCI_VDEVICE(CIRRUS, 0x6001), 0, }, /* CS4280 */ + { PCI_VDEVICE(CIRRUS, 0x6003), 0, }, /* CS4612 */ + { PCI_VDEVICE(CIRRUS, 0x6004), 0, }, /* CS4615 */ { 0, } }; diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c index c7f3b994101..168af67d938 100644 --- a/sound/pci/emu10k1/emu10k1.c +++ b/sound/pci/emu10k1/emu10k1.c @@ -77,9 +77,9 @@ MODULE_PARM_DESC(subsystem, "Force card subsystem model."); * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value Model:SB0400 */ static struct pci_device_id snd_emu10k1_ids[] = { - { 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* EMU10K1 */ - { 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy */ - { 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy 2 Value SB0400 */ + { PCI_VDEVICE(CREATIVE, 0x0002), 0 }, /* EMU10K1 */ + { PCI_VDEVICE(CREATIVE, 0x0004), 1 }, /* Audigy */ + { PCI_VDEVICE(CREATIVE, 0x0008), 1 }, /* Audigy 2 Value SB0400 */ { 0, } }; diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index 4d3ad793e98..36e08bd2b3c 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -1607,7 +1607,7 @@ static void __devexit snd_emu10k1x_remove(struct pci_dev *pci) // PCI IDs static struct pci_device_id snd_emu10k1x_ids[] = { - { 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dell OEM version (EMU10K1) */ + { PCI_VDEVICE(CREATIVE, 0x0006), 0 }, /* Dell OEM version (EMU10K1) */ { 0, } }; MODULE_DEVICE_TABLE(pci, snd_emu10k1x_ids); diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c index e617acaf10e..61b8ab39800 100644 --- a/sound/pci/emu10k1/p16v.c +++ b/sound/pci/emu10k1/p16v.c @@ -644,7 +644,7 @@ int __devinit snd_p16v_pcm(struct snd_emu10k1 *emu, int device, struct snd_pcm * int err; int capture=1; - /* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */ + /* snd_printk(KERN_DEBUG "snd_p16v_pcm called. device=%d\n", device); */ emu->p16v_device_offset = device; if (rpcm) *rpcm = NULL; diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 18f4d1e98c4..2b82c5c723e 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -445,12 +445,12 @@ static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id); static struct pci_device_id snd_audiopci_ids[] = { #ifdef CHIP1370 - { 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1370 */ + { PCI_VDEVICE(ENSONIQ, 0x5000), 0, }, /* ES1370 */ #endif #ifdef CHIP1371 - { 0x1274, 0x1371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1371 */ - { 0x1274, 0x5880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1373 - CT5880 */ - { 0x1102, 0x8938, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Ectiva EV1938 */ + { PCI_VDEVICE(ENSONIQ, 0x1371), 0, }, /* ES1371 */ + { PCI_VDEVICE(ENSONIQ, 0x5880), 0, }, /* ES1373 - CT5880 */ + { PCI_VDEVICE(ECTIVA, 0x8938), 0, }, /* Ectiva EV1938 */ #endif { 0, } }; diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c index fbd2ac09aa3..820318ee62c 100644 --- a/sound/pci/es1938.c +++ b/sound/pci/es1938.c @@ -244,7 +244,7 @@ struct es1938 { static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id); static struct pci_device_id snd_es1938_ids[] = { - { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Solo-1 */ + { PCI_VDEVICE(ESS, 0x1969), 0, }, /* Solo-1 */ { 0, } }; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 462e2cedaa6..26d255de6be 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3470,10 +3470,16 @@ int snd_hda_multi_out_analog_open(struct hda_codec *codec, } mutex_lock(&codec->spdif_mutex); if (mout->share_spdif) { - runtime->hw.rates &= mout->spdif_rates; - runtime->hw.formats &= mout->spdif_formats; - if (mout->spdif_maxbps < hinfo->maxbps) - hinfo->maxbps = mout->spdif_maxbps; + if ((runtime->hw.rates & mout->spdif_rates) && + (runtime->hw.formats & mout->spdif_formats)) { + runtime->hw.rates &= mout->spdif_rates; + runtime->hw.formats &= mout->spdif_formats; + if (mout->spdif_maxbps < hinfo->maxbps) + hinfo->maxbps = mout->spdif_maxbps; + } else { + mout->share_spdif = 0; + /* FIXME: need notify? */ + } } mutex_unlock(&codec->spdif_mutex); } diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 4e9ea708027..1877d95d4aa 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1454,6 +1454,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) mutex_unlock(&chip->open_mutex); return err; } + snd_pcm_limit_hw_rates(runtime); spin_lock_irqsave(&chip->reg_lock, flags); azx_dev->substream = substream; azx_dev->running = 0; @@ -1463,6 +1464,12 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) snd_pcm_set_sync(substream); mutex_unlock(&chip->open_mutex); + if (snd_BUG_ON(!runtime->hw.channels_min || !runtime->hw.channels_max)) + return -EINVAL; + if (snd_BUG_ON(!runtime->hw.formats)) + return -EINVAL; + if (snd_BUG_ON(!runtime->hw.rates)) + return -EINVAL; return 0; } diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 84cc49ca914..be7d25fa7f3 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -72,6 +72,7 @@ struct ad198x_spec { hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; unsigned int jack_present :1; + unsigned int inv_jack_detect:1; #ifdef CONFIG_SND_HDA_POWER_SAVE struct hda_loopback_check loopback; @@ -669,39 +670,13 @@ static struct hda_input_mux ad1986a_automic_capture_source = { }, }; -static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = { +static struct snd_kcontrol_new ad1986a_laptop_master_mixers[] = { HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw), - HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT), - HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .info = ad198x_mux_enum_info, - .get = ad198x_mux_enum_get, - .put = ad198x_mux_enum_put, - }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "External Amplifier", - .info = ad198x_eapd_info, - .get = ad198x_eapd_get, - .put = ad198x_eapd_put, - .private_value = 0x1b | (1 << 8), /* port-D, inversed */ - }, { } /* end */ }; -static struct snd_kcontrol_new ad1986a_samsung_mixers[] = { - HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), - HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw), +static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = { HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), @@ -727,6 +702,12 @@ static struct snd_kcontrol_new ad1986a_samsung_mixers[] = { { } /* end */ }; +static struct snd_kcontrol_new ad1986a_laptop_intmic_mixers[] = { + HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT), + { } /* end */ +}; + /* re-connect the mic boost input according to the jack sensing */ static void ad1986a_automic(struct hda_codec *codec) { @@ -776,8 +757,9 @@ static void ad1986a_hp_automute(struct hda_codec *codec) unsigned int present; present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0); - /* Lenovo N100 seems to report the reversed bit for HP jack-sensing */ - spec->jack_present = !(present & 0x80000000); + spec->jack_present = !!(present & 0x80000000); + if (spec->inv_jack_detect) + spec->jack_present = !spec->jack_present; ad1986a_update_hp(codec); } @@ -816,7 +798,7 @@ static int ad1986a_hp_master_sw_put(struct snd_kcontrol *kcontrol, return change; } -static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = { +static struct snd_kcontrol_new ad1986a_automute_master_mixers[] = { HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -826,33 +808,10 @@ static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = { .put = ad1986a_hp_master_sw_put, .private_value = HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_OUTPUT), }, - HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .info = ad198x_mux_enum_info, - .get = ad198x_mux_enum_get, - .put = ad198x_mux_enum_put, - }, - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "External Amplifier", - .info = ad198x_eapd_info, - .get = ad198x_eapd_get, - .put = ad198x_eapd_put, - .private_value = 0x1b | (1 << 8), /* port-D, inversed */ - }, { } /* end */ }; + /* * initialization verbs */ @@ -981,6 +940,27 @@ static struct hda_verb ad1986a_hp_init_verbs[] = { {} }; +static void ad1986a_samsung_p50_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case AD1986A_HP_EVENT: + ad1986a_hp_automute(codec); + break; + case AD1986A_MIC_EVENT: + ad1986a_automic(codec); + break; + } +} + +static int ad1986a_samsung_p50_init(struct hda_codec *codec) +{ + ad198x_init(codec); + ad1986a_hp_automute(codec); + ad1986a_automic(codec); + return 0; +} + /* models */ enum { @@ -991,6 +971,7 @@ enum { AD1986A_LAPTOP_AUTOMUTE, AD1986A_ULTRA, AD1986A_SAMSUNG, + AD1986A_SAMSUNG_P50, AD1986A_MODELS }; @@ -1002,6 +983,7 @@ static const char *ad1986a_models[AD1986A_MODELS] = { [AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute", [AD1986A_ULTRA] = "ultra", [AD1986A_SAMSUNG] = "samsung", + [AD1986A_SAMSUNG_P50] = "samsung-p50", }; static struct snd_pci_quirk ad1986a_cfg_tbl[] = { @@ -1024,6 +1006,7 @@ static struct snd_pci_quirk ad1986a_cfg_tbl[] = { SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD), SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK), SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP), + SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50), SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA), SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG), SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK), @@ -1111,7 +1094,10 @@ static int patch_ad1986a(struct hda_codec *codec) spec->multiout.dac_nids = ad1986a_laptop_dac_nids; break; case AD1986A_LAPTOP_EAPD: - spec->mixers[0] = ad1986a_laptop_eapd_mixers; + spec->num_mixers = 3; + spec->mixers[0] = ad1986a_laptop_master_mixers; + spec->mixers[1] = ad1986a_laptop_eapd_mixers; + spec->mixers[2] = ad1986a_laptop_intmic_mixers; spec->num_init_verbs = 2; spec->init_verbs[1] = ad1986a_eapd_init_verbs; spec->multiout.max_channels = 2; @@ -1122,7 +1108,9 @@ static int patch_ad1986a(struct hda_codec *codec) spec->input_mux = &ad1986a_laptop_eapd_capture_source; break; case AD1986A_SAMSUNG: - spec->mixers[0] = ad1986a_samsung_mixers; + spec->num_mixers = 2; + spec->mixers[0] = ad1986a_laptop_master_mixers; + spec->mixers[1] = ad1986a_laptop_eapd_mixers; spec->num_init_verbs = 3; spec->init_verbs[1] = ad1986a_eapd_init_verbs; spec->init_verbs[2] = ad1986a_automic_verbs; @@ -1135,8 +1123,28 @@ static int patch_ad1986a(struct hda_codec *codec) codec->patch_ops.unsol_event = ad1986a_automic_unsol_event; codec->patch_ops.init = ad1986a_automic_init; break; + case AD1986A_SAMSUNG_P50: + spec->num_mixers = 2; + spec->mixers[0] = ad1986a_automute_master_mixers; + spec->mixers[1] = ad1986a_laptop_eapd_mixers; + spec->num_init_verbs = 4; + spec->init_verbs[1] = ad1986a_eapd_init_verbs; + spec->init_verbs[2] = ad1986a_automic_verbs; + spec->init_verbs[3] = ad1986a_hp_init_verbs; + spec->multiout.max_channels = 2; + spec->multiout.num_dacs = 1; + spec->multiout.dac_nids = ad1986a_laptop_dac_nids; + if (!is_jack_available(codec, 0x25)) + spec->multiout.dig_out_nid = 0; + spec->input_mux = &ad1986a_automic_capture_source; + codec->patch_ops.unsol_event = ad1986a_samsung_p50_unsol_event; + codec->patch_ops.init = ad1986a_samsung_p50_init; + break; case AD1986A_LAPTOP_AUTOMUTE: - spec->mixers[0] = ad1986a_laptop_automute_mixers; + spec->num_mixers = 3; + spec->mixers[0] = ad1986a_automute_master_mixers; + spec->mixers[1] = ad1986a_laptop_eapd_mixers; + spec->mixers[2] = ad1986a_laptop_intmic_mixers; spec->num_init_verbs = 3; spec->init_verbs[1] = ad1986a_eapd_init_verbs; spec->init_verbs[2] = ad1986a_hp_init_verbs; @@ -1148,6 +1156,10 @@ static int patch_ad1986a(struct hda_codec *codec) spec->input_mux = &ad1986a_laptop_eapd_capture_source; codec->patch_ops.unsol_event = ad1986a_hp_unsol_event; codec->patch_ops.init = ad1986a_hp_init; + /* Lenovo N100 seems to report the reversed bit + * for HP jack-sensing + */ + spec->inv_jack_detect = 1; break; case AD1986A_ULTRA: spec->mixers[0] = ad1986a_laptop_eapd_mixers; @@ -3734,9 +3746,30 @@ static struct snd_kcontrol_new ad1884a_laptop_mixers[] = { { } /* end */ }; +static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); + int mute = (!ucontrol->value.integer.value[0] && + !ucontrol->value.integer.value[1]); + /* toggle GPIO1 according to the mute state */ + snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, + mute ? 0x02 : 0x0); + return ret; +} + static struct snd_kcontrol_new ad1884a_mobile_mixers[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT), + /*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/ + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .info = snd_hda_mixer_amp_switch_info, + .get = snd_hda_mixer_amp_switch_get, + .put = ad1884a_mobile_master_sw_put, + .private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT), + }, HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT), HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT), HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT), @@ -3857,6 +3890,10 @@ static struct hda_verb ad1884a_mobile_verbs[] = { /* unsolicited event for pin-sense */ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT}, {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT}, + /* allow to touch GPIO1 (for mute control) */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x02}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */ { } /* end */ }; @@ -3966,6 +4003,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE), + SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP), SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP), SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD), diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c index 392d108c355..019ca7cb56d 100644 --- a/sound/pci/hda/patch_ca0110.c +++ b/sound/pci/hda/patch_ca0110.c @@ -510,7 +510,7 @@ static int ca0110_parse_auto_config(struct hda_codec *codec) } -int patch_ca0110(struct hda_codec *codec) +static int patch_ca0110(struct hda_codec *codec) { struct ca0110_spec *spec; int err; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 33453319742..e661b21354b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -945,12 +945,13 @@ static void alc_fix_pll_init(struct hda_codec *codec, hda_nid_t nid, static void alc_automute_pin(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - unsigned int present; + unsigned int present, pincap; unsigned int nid = spec->autocfg.hp_pins[0]; int i; - /* need to execute and sync at first */ - snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); + pincap = snd_hda_query_pin_caps(codec, nid); + if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ + snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); present = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0); spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0; @@ -1392,7 +1393,7 @@ static struct hda_verb alc888_fujitsu_xa3530_verbs[] = { static void alc_automute_amp(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - unsigned int val, mute; + unsigned int val, mute, pincap; hda_nid_t nid; int i; @@ -1401,6 +1402,10 @@ static void alc_automute_amp(struct hda_codec *codec) nid = spec->autocfg.hp_pins[i]; if (!nid) break; + pincap = snd_hda_query_pin_caps(codec, nid); + if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ + snd_hda_codec_read(codec, nid, 0, + AC_VERB_SET_PIN_SENSE, 0); val = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0); if (val & AC_PINSENSE_PRESENCE) { @@ -1471,6 +1476,10 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { static struct hda_verb alc888_acer_aspire_6530g_verbs[] = { /* Bias voltage on for external mic port */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80}, +/* Front Mic: set to PIN_IN (empty by default) */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +/* Unselect Front Mic by default in input mixer 3 */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)}, /* Enable unsolicited event for HP jack */ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, /* Enable speaker output */ @@ -1560,18 +1569,22 @@ static struct hda_input_mux alc888_2_capture_sources[2] = { static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = { /* Interal mic only available on one ADC */ { - .num_items = 3, + .num_items = 5, .items = { { "Ext Mic", 0x0 }, + { "Line In", 0x2 }, { "CD", 0x4 }, + { "Input Mix", 0xa }, { "Int Mic", 0xb }, }, }, { - .num_items = 2, + .num_items = 4, .items = { { "Ext Mic", 0x0 }, + { "Line In", 0x2 }, { "CD", 0x4 }, + { "Input Mix", 0xa }, }, } }; @@ -1639,6 +1652,17 @@ static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec) alc_automute_amp(codec); } +static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + spec->autocfg.hp_pins[0] = 0x15; + spec->autocfg.speaker_pins[0] = 0x14; + spec->autocfg.speaker_pins[1] = 0x16; + spec->autocfg.speaker_pins[2] = 0x17; + alc_automute_amp(codec); +} + static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -8189,6 +8213,8 @@ static struct snd_kcontrol_new alc888_acer_aspire_6530_mixer[] = { HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), @@ -9064,7 +9090,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", - ALC888_ACER_ASPIRE_4930G), + ALC888_ACER_ASPIRE_6530G), SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G", ALC888_ACER_ASPIRE_6530G), /* default Acer -- disabled as it causes more problems. @@ -9317,7 +9343,7 @@ static struct alc_config_preset alc883_presets[] = { ARRAY_SIZE(alc888_2_capture_sources), .input_mux = alc888_acer_aspire_6530_sources, .unsol_event = alc_automute_amp_unsol_event, - .init_hook = alc888_acer_aspire_4930g_init_hook, + .init_hook = alc888_acer_aspire_6530g_init_hook, }, [ALC888_ACER_ASPIRE_8930G] = { .mixers = { alc888_base_mixer, @@ -12437,6 +12463,8 @@ static int alc268_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + alc_ssid_check(codec, 0x15, 0x1b, 0x14); + return 1; } @@ -12848,20 +12876,11 @@ static struct snd_kcontrol_new alc269_lifebook_mixer[] = { { } }; -/* bind volumes of both NID 0x0c and 0x0d */ -static struct hda_bind_ctls alc269_epc_bind_vol = { - .ops = &snd_hda_bind_vol, - .values = { - HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT), - HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT), - 0 - }, -}; - static struct snd_kcontrol_new alc269_eeepc_mixer[] = { - HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol), - HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT), { } /* end */ }; @@ -12874,12 +12893,7 @@ static struct snd_kcontrol_new alc269_epc_capture_mixer[] = { }; /* FSC amilo */ -static struct snd_kcontrol_new alc269_fujitsu_mixer[] = { - HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), - HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol), - { } /* end */ -}; +#define alc269_fujitsu_mixer alc269_eeepc_mixer static struct hda_verb alc269_quanta_fl1_verbs[] = { {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, @@ -13345,6 +13359,8 @@ static int alc269_parse_auto_config(struct hda_codec *codec) if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); + alc_ssid_check(codec, 0x15, 0x1b, 0x14); + return 1; } diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index 0d0cdbdb448..cecf1ffeeaa 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -107,7 +107,7 @@ MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE."); static const struct pci_device_id snd_ice1712_ids[] = { - { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICE1712 */ + { PCI_VDEVICE(ICE, PCI_DEVICE_ID_ICE_1712), 0 }, /* ICE1712 */ { 0, } }; diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 36ade77cf37..cc84a831eb2 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -93,7 +93,7 @@ MODULE_PARM_DESC(model, "Use the given board model."); /* Both VT1720 and VT1724 have the same PCI IDs */ static const struct pci_device_id snd_vt1724_ids[] = { - { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VDEVICE(ICE, PCI_DEVICE_ID_VT1724), 0 }, { 0, } }; diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 8aa5687f392..171ada53520 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -421,29 +421,29 @@ struct intel8x0 { }; static struct pci_device_id snd_intel8x0_ids[] = { - { 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */ - { 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */ - { 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */ - { 0x8086, 0x2485, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH3 */ - { 0x8086, 0x24c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH4 */ - { 0x8086, 0x24d5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH5 */ - { 0x8086, 0x25a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB */ - { 0x8086, 0x266e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH6 */ - { 0x8086, 0x27de, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH7 */ - { 0x8086, 0x2698, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB2 */ - { 0x8086, 0x7195, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 440MX */ - { 0x1039, 0x7012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS }, /* SI7012 */ - { 0x10de, 0x01b1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */ - { 0x10de, 0x003a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP04 */ - { 0x10de, 0x006a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */ - { 0x10de, 0x0059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK804 */ - { 0x10de, 0x008a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8 */ - { 0x10de, 0x00da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */ - { 0x10de, 0x00ea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8S */ - { 0x10de, 0x026b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP51 */ - { 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */ - { 0x1022, 0x7445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */ - { 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */ + { PCI_VDEVICE(INTEL, 0x2415), DEVICE_INTEL }, /* 82801AA */ + { PCI_VDEVICE(INTEL, 0x2425), DEVICE_INTEL }, /* 82901AB */ + { PCI_VDEVICE(INTEL, 0x2445), DEVICE_INTEL }, /* 82801BA */ + { PCI_VDEVICE(INTEL, 0x2485), DEVICE_INTEL }, /* ICH3 */ + { PCI_VDEVICE(INTEL, 0x24c5), DEVICE_INTEL_ICH4 }, /* ICH4 */ + { PCI_VDEVICE(INTEL, 0x24d5), DEVICE_INTEL_ICH4 }, /* ICH5 */ + { PCI_VDEVICE(INTEL, 0x25a6), DEVICE_INTEL_ICH4 }, /* ESB */ + { PCI_VDEVICE(INTEL, 0x266e), DEVICE_INTEL_ICH4 }, /* ICH6 */ + { PCI_VDEVICE(INTEL, 0x27de), DEVICE_INTEL_ICH4 }, /* ICH7 */ + { PCI_VDEVICE(INTEL, 0x2698), DEVICE_INTEL_ICH4 }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x7195), DEVICE_INTEL }, /* 440MX */ + { PCI_VDEVICE(SI, 0x7012), DEVICE_SIS }, /* SI7012 */ + { PCI_VDEVICE(NVIDIA, 0x01b1), DEVICE_NFORCE }, /* NFORCE */ + { PCI_VDEVICE(NVIDIA, 0x003a), DEVICE_NFORCE }, /* MCP04 */ + { PCI_VDEVICE(NVIDIA, 0x006a), DEVICE_NFORCE }, /* NFORCE2 */ + { PCI_VDEVICE(NVIDIA, 0x0059), DEVICE_NFORCE }, /* CK804 */ + { PCI_VDEVICE(NVIDIA, 0x008a), DEVICE_NFORCE }, /* CK8 */ + { PCI_VDEVICE(NVIDIA, 0x00da), DEVICE_NFORCE }, /* NFORCE3 */ + { PCI_VDEVICE(NVIDIA, 0x00ea), DEVICE_NFORCE }, /* CK8S */ + { PCI_VDEVICE(NVIDIA, 0x026b), DEVICE_NFORCE }, /* MCP51 */ + { PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL }, /* AMD8111 */ + { PCI_VDEVICE(AMD, 0x7445), DEVICE_INTEL }, /* AMD768 */ + { PCI_VDEVICE(AL, 0x5455), DEVICE_ALI }, /* Ali5455 */ { 0, } }; diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c index 6ec0fc50d6b..9e7d12e7673 100644 --- a/sound/pci/intel8x0m.c +++ b/sound/pci/intel8x0m.c @@ -220,24 +220,24 @@ struct intel8x0m { }; static struct pci_device_id snd_intel8x0m_ids[] = { - { 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */ - { 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */ - { 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */ - { 0x8086, 0x2486, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH3 */ - { 0x8086, 0x24c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH4 */ - { 0x8086, 0x24d6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH5 */ - { 0x8086, 0x266d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH6 */ - { 0x8086, 0x27dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH7 */ - { 0x8086, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 440MX */ - { 0x1022, 0x7446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */ - { 0x1039, 0x7013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS }, /* SI7013 */ - { 0x10de, 0x01c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */ - { 0x10de, 0x0069, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */ - { 0x10de, 0x0089, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2s */ - { 0x10de, 0x00d9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */ + { PCI_VDEVICE(INTEL, 0x2416), DEVICE_INTEL }, /* 82801AA */ + { PCI_VDEVICE(INTEL, 0x2426), DEVICE_INTEL }, /* 82901AB */ + { PCI_VDEVICE(INTEL, 0x2446), DEVICE_INTEL }, /* 82801BA */ + { PCI_VDEVICE(INTEL, 0x2486), DEVICE_INTEL }, /* ICH3 */ + { PCI_VDEVICE(INTEL, 0x24c6), DEVICE_INTEL }, /* ICH4 */ + { PCI_VDEVICE(INTEL, 0x24d6), DEVICE_INTEL }, /* ICH5 */ + { PCI_VDEVICE(INTEL, 0x266d), DEVICE_INTEL }, /* ICH6 */ + { PCI_VDEVICE(INTEL, 0x27dd), DEVICE_INTEL }, /* ICH7 */ + { PCI_VDEVICE(INTEL, 0x7196), DEVICE_INTEL }, /* 440MX */ + { PCI_VDEVICE(AMD, 0x7446), DEVICE_INTEL }, /* AMD768 */ + { PCI_VDEVICE(SI, 0x7013), DEVICE_SIS }, /* SI7013 */ + { PCI_VDEVICE(NVIDIA, 0x01c1), DEVICE_NFORCE }, /* NFORCE */ + { PCI_VDEVICE(NVIDIA, 0x0069), DEVICE_NFORCE }, /* NFORCE2 */ + { PCI_VDEVICE(NVIDIA, 0x0089), DEVICE_NFORCE }, /* NFORCE2s */ + { PCI_VDEVICE(NVIDIA, 0x00d9), DEVICE_NFORCE }, /* NFORCE3 */ #if 0 - { 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */ - { 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */ + { PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL }, /* AMD8111 */ + { PCI_VDEVICE(AL, 0x5455), DEVICE_ALI }, /* Ali5455 */ #endif { 0, } }; diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index 18da2ef04d0..11b8c6514b3 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -654,13 +654,12 @@ static int __devinit lx_init_ethersound_config(struct lx6464es *chip) int i; u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES); - u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) | + /* configure 64 io channels */ + u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) | (64 << IOCR_INPUTS_OFFSET) | + (64 << IOCR_OUTPUTS_OFFSET) | (FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET); - u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) - | (default_conf_es & CONFES_WRITE_PART_MASK); - snd_printdd("->lx_init_ethersound\n"); chip->freq_ratio = FREQ_RATIO_SINGLE_MODE; diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c index 82bc5b9e762..a83d1968a84 100644 --- a/sound/pci/mixart/mixart.c +++ b/sound/pci/mixart/mixart.c @@ -61,7 +61,7 @@ MODULE_PARM_DESC(enable, "Enable Digigram " CARD_NAME " soundcard."); */ static struct pci_device_id snd_mixart_ids[] = { - { 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */ + { PCI_VDEVICE(MOTOROLA, 0x0003), 0, }, /* MC8240 */ { 0, } }; diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c index 522a040855d..97a0731331a 100644 --- a/sound/pci/nm256/nm256.c +++ b/sound/pci/nm256/nm256.c @@ -263,9 +263,9 @@ struct nm256 { * PCI ids */ static struct pci_device_id snd_nm256_ids[] = { - {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0}, + {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0}, + {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0}, {0,}, }; diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index 304da169bfd..5401c547c4e 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -575,8 +575,10 @@ static int ac97_switch_put(struct snd_kcontrol *ctl, static int ac97_volume_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info) { + int stereo = (ctl->private_value >> 16) & 1; + info->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - info->count = 2; + info->count = stereo ? 2 : 1; info->value.integer.min = 0; info->value.integer.max = 0x1f; return 0; @@ -587,6 +589,7 @@ static int ac97_volume_get(struct snd_kcontrol *ctl, { struct oxygen *chip = ctl->private_data; unsigned int codec = (ctl->private_value >> 24) & 1; + int stereo = (ctl->private_value >> 16) & 1; unsigned int index = ctl->private_value & 0xff; u16 reg; @@ -594,7 +597,8 @@ static int ac97_volume_get(struct snd_kcontrol *ctl, reg = oxygen_read_ac97(chip, codec, index); mutex_unlock(&chip->mutex); value->value.integer.value[0] = 31 - (reg & 0x1f); - value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f); + if (stereo) + value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f); return 0; } @@ -603,6 +607,7 @@ static int ac97_volume_put(struct snd_kcontrol *ctl, { struct oxygen *chip = ctl->private_data; unsigned int codec = (ctl->private_value >> 24) & 1; + int stereo = (ctl->private_value >> 16) & 1; unsigned int index = ctl->private_value & 0xff; u16 oldreg, newreg; int change; @@ -612,8 +617,11 @@ static int ac97_volume_put(struct snd_kcontrol *ctl, newreg = oldreg; newreg = (newreg & ~0x1f) | (31 - (value->value.integer.value[0] & 0x1f)); - newreg = (newreg & ~0x1f00) | - ((31 - (value->value.integer.value[0] & 0x1f)) << 8); + if (stereo) + newreg = (newreg & ~0x1f00) | + ((31 - (value->value.integer.value[1] & 0x1f)) << 8); + else + newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8); change = newreg != oldreg; if (change) oxygen_write_ac97(chip, codec, index, newreg); @@ -673,7 +681,7 @@ static int ac97_fp_rec_volume_put(struct snd_kcontrol *ctl, .private_value = ((codec) << 24) | ((invert) << 16) | \ ((bitnr) << 8) | (index), \ } -#define AC97_VOLUME(xname, codec, index) { \ +#define AC97_VOLUME(xname, codec, index, stereo) { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ @@ -682,7 +690,7 @@ static int ac97_fp_rec_volume_put(struct snd_kcontrol *ctl, .get = ac97_volume_get, \ .put = ac97_volume_put, \ .tlv = { .p = ac97_db_scale, }, \ - .private_value = ((codec) << 24) | (index), \ + .private_value = ((codec) << 24) | ((stereo) << 16) | (index), \ } static DECLARE_TLV_DB_SCALE(monitor_db_scale, -1000, 1000, 0); @@ -882,18 +890,18 @@ static const struct { }; static const struct snd_kcontrol_new ac97_controls[] = { - AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC), + AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC, 0), AC97_SWITCH("Mic Capture Switch", 0, AC97_MIC, 15, 1), AC97_SWITCH("Mic Boost (+20dB)", 0, AC97_MIC, 6, 0), AC97_SWITCH("Line Capture Switch", 0, AC97_LINE, 15, 1), - AC97_VOLUME("CD Capture Volume", 0, AC97_CD), + AC97_VOLUME("CD Capture Volume", 0, AC97_CD, 1), AC97_SWITCH("CD Capture Switch", 0, AC97_CD, 15, 1), - AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX), + AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX, 1), AC97_SWITCH("Aux Capture Switch", 0, AC97_AUX, 15, 1), }; static const struct snd_kcontrol_new ac97_fp_controls[] = { - AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE), + AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE, 1), AC97_SWITCH("Front Panel Playback Switch", 1, AC97_HEADPHONE, 15, 1), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index bf971f7cfdc..6ebcb6bdd71 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -635,6 +635,8 @@ static void xonar_d2_resume(struct oxygen *chip) static void xonar_d1_resume(struct oxygen *chip) { + oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC); + msleep(1); cs43xx_init(chip); xonar_enable_output(chip); } diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c index d7b966e7c4c..f977dba7cbd 100644 --- a/sound/pci/rme32.c +++ b/sound/pci/rme32.c @@ -227,12 +227,9 @@ struct rme32 { }; static struct pci_device_id snd_rme32_ids[] = { - {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, - {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, - {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, + {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,}, + {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,}, + {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,}, {0,} }; diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c index 55fb1c131f5..2ba5c0fd55d 100644 --- a/sound/pci/rme96.c +++ b/sound/pci/rme96.c @@ -232,14 +232,10 @@ struct rme96 { }; static struct pci_device_id snd_rme96_ids[] = { - { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, - { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, - { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, - { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, + { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96), 0, }, + { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8), 0, }, + { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO), 0, }, + { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST), 0, }, { 0, } }; diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index 7dc60ad4772..1f6406c4534 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -243,7 +243,7 @@ struct sonicvibes { }; static struct pci_device_id snd_sonic_ids[] = { - { 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, + { PCI_VDEVICE(S3, 0xca00), 0, }, { 0, } }; diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 949fcaf6b70..acfa4760da4 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -402,9 +402,9 @@ struct via82xx { static struct pci_device_id snd_via82xx_ids[] = { /* 0x1106, 0x3058 */ - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, }, /* 686A */ + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686_5), TYPE_CARD_VIA686, }, /* 686A */ /* 0x1106, 0x3059 */ - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, }, /* VT8233 */ + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_5), TYPE_CARD_VIA8233, }, /* VT8233 */ { 0, } }; diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c index 0d54e3503c1..47eb61561df 100644 --- a/sound/pci/via82xx_modem.c +++ b/sound/pci/via82xx_modem.c @@ -261,7 +261,7 @@ struct via82xx_modem { }; static struct pci_device_id snd_via82xx_modem_ids[] = { - { 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, }, + { PCI_VDEVICE(VIA, 0x3068), TYPE_CARD_VIA82XX_MODEM, }, { 0, } }; diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 4af66661f9b..e6b18b90d45 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -67,12 +67,12 @@ module_param_array(rear_switch, bool, NULL, 0444); MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch"); static struct pci_device_id snd_ymfpci_ids[] = { - { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724 */ - { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724F */ - { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740 */ - { 0x1073, 0x000c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740C */ - { 0x1073, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF744 */ - { 0x1073, 0x0012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF754 */ + { PCI_VDEVICE(YAMAHA, 0x0004), 0, }, /* YMF724 */ + { PCI_VDEVICE(YAMAHA, 0x000d), 0, }, /* YMF724F */ + { PCI_VDEVICE(YAMAHA, 0x000a), 0, }, /* YMF740 */ + { PCI_VDEVICE(YAMAHA, 0x000c), 0, }, /* YMF740C */ + { PCI_VDEVICE(YAMAHA, 0x0010), 0, }, /* YMF744 */ + { PCI_VDEVICE(YAMAHA, 0x0012), 0, }, /* YMF754 */ { 0, } }; diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 5dbebf82249..8cb65ccad35 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -33,7 +33,7 @@ config SND_SOC_MPC5200_I2S config SND_SOC_MPC5200_AC97 tristate "Freescale MPC5200 PSC in AC97 mode driver" depends on PPC_MPC52xx && PPC_BESTCOMM - select AC97_BUS + select SND_SOC_AC97_BUS select SND_MPC52xx_DMA select PPC_BESTCOMM_GEN_BD help @@ -41,7 +41,7 @@ config SND_SOC_MPC5200_AC97 config SND_MPC52xx_SOC_PCM030 tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712" - depends on PPC_MPC5200_SIMPLE && BROKEN + depends on PPC_MPC5200_SIMPLE select SND_SOC_MPC5200_AC97 select SND_SOC_WM9712 help @@ -50,7 +50,7 @@ config SND_MPC52xx_SOC_PCM030 config SND_MPC52xx_SOC_EFIKA tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" - depends on PPC_EFIKA && BROKEN + depends on PPC_EFIKA select SND_SOC_MPC5200_AC97 select SND_SOC_STAC9766 help diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 6454e15f7d2..84a1950880e 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -216,12 +216,15 @@ static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream) dma_addr_t ptr; snd_pcm_uframes_t offset; - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - ptr = omap_get_dma_src_pos(prtd->dma_ch); - else + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { ptr = omap_get_dma_dst_pos(prtd->dma_ch); + offset = bytes_to_frames(runtime, ptr - runtime->dma_addr); + } else if (!(cpu_is_omap1510())) { + ptr = omap_get_dma_src_pos(prtd->dma_ch); + offset = bytes_to_frames(runtime, ptr - runtime->dma_addr); + } else + offset = prtd->period_index * runtime->period_size; - offset = bytes_to_frames(runtime, ptr - runtime->dma_addr); if (offset >= runtime->buffer_size) offset = 0; diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 4743e262895..6b8f655d1ad 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -167,6 +167,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream, BUG_ON(IS_ERR(clk_i2s)); clk_enable(clk_i2s); + dai->private_data = dai; pxa_i2s_wait(); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) @@ -255,7 +256,10 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream, if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) { SACR0 &= ~SACR0_ENB; pxa_i2s_wait(); - clk_disable(clk_i2s); + if (dai->private_data != NULL) { + clk_disable(clk_i2s); + dai->private_data = NULL; + } } } @@ -336,6 +340,7 @@ static int pxa2xx_i2s_probe(struct platform_device *dev) return PTR_ERR(clk_i2s); pxa_i2s_dai.dev = &dev->dev; + pxa_i2s_dai.private_data = NULL; ret = snd_soc_register_dai(&pxa_i2s_dai); if (ret != 0) clk_put(clk_i2s); diff --git a/sound/sound_core.c b/sound/sound_core.c index 12522e6913d..a41f8b127f4 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -10,6 +10,8 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/kdev_t.h> +#include <linux/major.h> #include <sound/core.h> #ifdef CONFIG_SOUND_OSS_CORE @@ -29,6 +31,8 @@ MODULE_LICENSE("GPL"); static char *sound_nodename(struct device *dev) { + if (MAJOR(dev->devt) == SOUND_MAJOR) + return NULL; return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev)); } @@ -104,7 +108,6 @@ module_exit(cleanup_soundcore); #include <linux/types.h> #include <linux/kernel.h> #include <linux/sound.h> -#include <linux/major.h> #include <linux/kmod.h> #define SOUND_STEP 16 diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 0e5db719de2..de38108f0b2 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -35,7 +35,7 @@ #include "input.h" MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.17"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," @@ -349,7 +349,9 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) log("Unable to set up control system (ret=%d)\n", ret); } -static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) +static int create_card(struct usb_device *usb_dev, + struct usb_interface *intf, + struct snd_card **cardp) { int devnum; int err; @@ -374,7 +376,7 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor), le16_to_cpu(usb_dev->descriptor.idProduct)); spin_lock_init(&dev->spinlock); - snd_card_set_dev(card, &usb_dev->dev); + snd_card_set_dev(card, &intf->dev); *cardp = card; return 0; @@ -461,7 +463,7 @@ static int __devinit snd_probe(struct usb_interface *intf, struct snd_card *card; struct usb_device *device = interface_to_usbdev(intf); - ret = create_card(device, &card); + ret = create_card(device, intf, &card); if (ret < 0) return ret; diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index a5aae9d67f3..fd44946ce4b 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -514,7 +514,6 @@ static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp) US122L(card)->chip.dev->bus->busnum, US122L(card)->chip.dev->devnum ); - snd_card_set_dev(card, &device->dev); *cardp = card; return 0; } @@ -531,6 +530,7 @@ static int us122l_usb_probe(struct usb_interface *intf, if (err < 0) return err; + snd_card_set_dev(card, &intf->dev); if (!us122l_create_card(card)) { snd_card_free(card); return -EINVAL; diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index 5ce0da23ee9..cb4bb8373ca 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -364,7 +364,6 @@ static int usX2Y_create_card(struct usb_device *device, struct snd_card **cardp) 0,//us428(card)->usbmidi.ifnum, usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum ); - snd_card_set_dev(card, &device->dev); *cardp = card; return 0; } @@ -388,6 +387,7 @@ static int usX2Y_usb_probe(struct usb_device *device, err = usX2Y_create_card(device, &card); if (err < 0) return err; + snd_card_set_dev(card, &intf->dev); if ((err = usX2Y_hwdep_new(card, device)) < 0 || (err = snd_card_register(card)) < 0) { snd_card_free(card); diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c index dd1ab617784..9efd27f6b52 100644 --- a/sound/usb/usx2y/usbusx2yaudio.c +++ b/sound/usb/usx2y/usbusx2yaudio.c @@ -296,9 +296,10 @@ static void usX2Y_error_urb_status(struct usX2Ydev *usX2Y, static void usX2Y_error_sequence(struct usX2Ydev *usX2Y, struct snd_usX2Y_substream *subs, struct urb *urb) { - snd_printk(KERN_ERR "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n" - KERN_ERR "Most propably some urb of usb-frame %i is still missing.\n" - KERN_ERR "Cause could be too long delays in usb-hcd interrupt handling.\n", + snd_printk(KERN_ERR +"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n" +"Most propably some urb of usb-frame %i is still missing.\n" +"Cause could be too long delays in usb-hcd interrupt handling.\n", usb_get_current_frame_number(usX2Y->chip.dev), subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out", usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame); diff --git a/tools/perf/CREDITS b/tools/perf/CREDITS new file mode 100644 index 00000000000..c2ddcb3acbd --- /dev/null +++ b/tools/perf/CREDITS @@ -0,0 +1,30 @@ +Most of the infrastructure that 'perf' uses here has been reused +from the Git project, as of version: + + 66996ec: Sync with 1.6.2.4 + +Here is an (incomplete!) list of main contributors to those files +in util/* and elsewhere: + + Alex Riesen + Christian Couder + Dmitry Potapov + Jeff King + Johannes Schindelin + Johannes Sixt + Junio C Hamano + Linus Torvalds + Matthias Kestenholz + Michal Ostrowski + Miklos Vajna + Petr Baudis + Pierre Habouzit + René Scharfe + Samuel Tardieu + Shawn O. Pearce + Steffen Prohaska + Steve Haslam + +Thanks guys! + +The full history of the files can be found in the upstream Git commits. diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt index 52d3fc6846a..8aa3f8c8870 100644 --- a/tools/perf/Documentation/perf-report.txt +++ b/tools/perf/Documentation/perf-report.txt @@ -13,13 +13,25 @@ SYNOPSIS DESCRIPTION ----------- This command displays the performance counter profile information recorded -via perf report. +via perf record. OPTIONS ------- -i:: --input=:: Input file name. (default: perf.data) +-d:: +--dsos=:: + Only consider symbols in these dsos. CSV that understands + file://filename entries. +-C:: +--comms=:: + Only consider symbols in these comms. CSV that understands + file://filename entries. +-S:: +--symbols=:: + Only consider these symbols. CSV that understands + file://filename entries. SEE ALSO -------- diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index c368a72721d..0d74346d21a 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -8,8 +8,8 @@ perf-stat - Run a command and gather performance counter statistics SYNOPSIS -------- [verse] -'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] <command> -'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>] +'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command> +'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>] DESCRIPTION ----------- @@ -40,7 +40,7 @@ OPTIONS -a:: system-wide collection --l:: +-S:: scale counter values EXAMPLES diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 36d7eef4991..9c6d0ae3708 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -290,7 +290,7 @@ LIB_FILE=libperf.a LIB_H += ../../include/linux/perf_counter.h LIB_H += perf.h -LIB_H += types.h +LIB_H += util/types.h LIB_H += util/list.h LIB_H += util/rbtree.h LIB_H += util/levenshtein.h @@ -301,6 +301,7 @@ LIB_H += util/util.h LIB_H += util/help.h LIB_H += util/strbuf.h LIB_H += util/string.h +LIB_H += util/strlist.h LIB_H += util/run-command.h LIB_H += util/sigchain.h LIB_H += util/symbol.h @@ -322,12 +323,15 @@ LIB_OBJS += util/run-command.o LIB_OBJS += util/quote.o LIB_OBJS += util/strbuf.o LIB_OBJS += util/string.o +LIB_OBJS += util/strlist.o LIB_OBJS += util/usage.o LIB_OBJS += util/wrapper.o LIB_OBJS += util/sigchain.o LIB_OBJS += util/symbol.o LIB_OBJS += util/color.o LIB_OBJS += util/pager.o +LIB_OBJS += util/header.o +LIB_OBJS += util/callchain.o BUILTIN_OBJS += builtin-annotate.o BUILTIN_OBJS += builtin-help.o diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 7e58e3ad150..722c0f54e54 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -855,7 +855,7 @@ static unsigned long total = 0, total_unknown = 0; static int -process_overflow_event(event_t *event, unsigned long offset, unsigned long head) +process_sample_event(event_t *event, unsigned long offset, unsigned long head) { char level; int show = 0; @@ -1013,10 +1013,10 @@ process_period_event(event_t *event, unsigned long offset, unsigned long head) static int process_event(event_t *event, unsigned long offset, unsigned long head) { - if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) - return process_overflow_event(event, offset, head); - switch (event->header.type) { + case PERF_EVENT_SAMPLE: + return process_sample_event(event, offset, head); + case PERF_EVENT_MMAP: return process_mmap_event(event, offset, head); diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index d7ebbd75754..d18546f37d7 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -14,6 +14,8 @@ #include "util/parse-events.h" #include "util/string.h" +#include "util/header.h" + #include <unistd.h> #include <sched.h> @@ -39,6 +41,8 @@ static int force = 0; static int append_file = 0; static int call_graph = 0; static int verbose = 0; +static int inherit_stat = 0; +static int no_samples = 0; static long samples; static struct timeval last_read; @@ -52,7 +56,8 @@ static int nr_poll; static int nr_cpu; static int file_new = 1; -static struct perf_file_header file_header; + +struct perf_header *header; struct mmap_event { struct perf_event_header header; @@ -306,12 +311,11 @@ static void pid_synthesize_mmap_samples(pid_t pid) continue; pbf += n + 3; if (*pbf == 'x') { /* vm_exec */ - char *execname = strrchr(bf, ' '); + char *execname = strchr(bf, '/'); - if (execname == NULL || execname[1] != '/') + if (execname == NULL) continue; - execname += 1; size = strlen(execname); execname[size - 1] = '\0'; /* Remove \n */ memcpy(mmap_ev.filename, execname, size); @@ -329,7 +333,7 @@ static void pid_synthesize_mmap_samples(pid_t pid) fclose(fp); } -static void synthesize_samples(void) +static void synthesize_all(void) { DIR *proc; struct dirent dirent, *next; @@ -353,10 +357,35 @@ static void synthesize_samples(void) static int group_fd; +static struct perf_header_attr *get_header_attr(struct perf_counter_attr *a, int nr) +{ + struct perf_header_attr *h_attr; + + if (nr < header->attrs) { + h_attr = header->attr[nr]; + } else { + h_attr = perf_header_attr__new(a); + perf_header__add_attr(header, h_attr); + } + + return h_attr; +} + static void create_counter(int counter, int cpu, pid_t pid) { struct perf_counter_attr *attr = attrs + counter; - int track = 1; + struct perf_header_attr *h_attr; + int track = !counter; /* only the first counter needs these */ + struct { + u64 count; + u64 time_enabled; + u64 time_running; + u64 id; + } read_data; + + attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | + PERF_FORMAT_TOTAL_TIME_RUNNING | + PERF_FORMAT_ID; attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID; @@ -366,25 +395,20 @@ static void create_counter(int counter, int cpu, pid_t pid) attr->sample_freq = freq; } + if (no_samples) + attr->sample_freq = 0; + + if (inherit_stat) + attr->inherit_stat = 1; + if (call_graph) attr->sample_type |= PERF_SAMPLE_CALLCHAIN; - if (file_new) { - file_header.sample_type = attr->sample_type; - } else { - if (file_header.sample_type != attr->sample_type) { - fprintf(stderr, "incompatible append\n"); - exit(-1); - } - } - attr->mmap = track; attr->comm = track; attr->inherit = (cpu < 0) && inherit; attr->disabled = 1; - track = 0; /* only the first counter needs these */ - try_again: fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0); @@ -415,6 +439,22 @@ try_again: exit(-1); } + h_attr = get_header_attr(attr, counter); + + if (!file_new) { + if (memcmp(&h_attr->attr, attr, sizeof(*attr))) { + fprintf(stderr, "incompatible append\n"); + exit(-1); + } + } + + if (read(fd[nr_cpu][counter], &read_data, sizeof(read_data)) == -1) { + perror("Unable to read perf file descriptor\n"); + exit(-1); + } + + perf_header_attr__add_id(h_attr, read_data.id); + assert(fd[nr_cpu][counter] >= 0); fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK); @@ -445,11 +485,6 @@ static void open_counters(int cpu, pid_t pid) { int counter; - if (pid > 0) { - pid_synthesize_comm_event(pid, 0); - pid_synthesize_mmap_samples(pid); - } - group_fd = -1; for (counter = 0; counter < nr_counters; counter++) create_counter(counter, cpu, pid); @@ -459,17 +494,16 @@ static void open_counters(int cpu, pid_t pid) static void atexit_header(void) { - file_header.data_size += bytes_written; + header->data_size += bytes_written; - if (pwrite(output, &file_header, sizeof(file_header), 0) == -1) - perror("failed to write on file headers"); + perf_header__write(header, output); } static int __cmd_record(int argc, const char **argv) { int i, counter; struct stat st; - pid_t pid; + pid_t pid = 0; int flags; int ret; @@ -500,22 +534,31 @@ static int __cmd_record(int argc, const char **argv) exit(-1); } - if (!file_new) { - if (read(output, &file_header, sizeof(file_header)) == -1) { - perror("failed to read file headers"); - exit(-1); - } - - lseek(output, file_header.data_size, SEEK_CUR); - } + if (!file_new) + header = perf_header__read(output); + else + header = perf_header__new(); atexit(atexit_header); if (!system_wide) { - open_counters(-1, target_pid != -1 ? target_pid : getpid()); + pid = target_pid; + if (pid == -1) + pid = getpid(); + + open_counters(-1, pid); } else for (i = 0; i < nr_cpus; i++) open_counters(i, target_pid); + if (file_new) + perf_header__write(header, output); + + if (!system_wide) { + pid_synthesize_comm_event(pid, 0); + pid_synthesize_mmap_samples(pid); + } else + synthesize_all(); + if (target_pid == -1 && argc) { pid = fork(); if (pid < 0) @@ -539,10 +582,7 @@ static int __cmd_record(int argc, const char **argv) } } - if (system_wide) - synthesize_samples(); - - while (!done) { + for (;;) { int hits = samples; for (i = 0; i < nr_cpu; i++) { @@ -550,8 +590,11 @@ static int __cmd_record(int argc, const char **argv) mmap_read(&mmap_array[i][counter]); } - if (hits == samples) + if (hits == samples) { + if (done) + break; ret = poll(event_array, nr_poll, 100); + } } /* @@ -600,6 +643,10 @@ static const struct option options[] = { "do call-graph (stack chain/backtrace) recording"), OPT_BOOLEAN('v', "verbose", &verbose, "be more verbose (show counter open errors, etc)"), + OPT_BOOLEAN('s', "stat", &inherit_stat, + "per thread counts"), + OPT_BOOLEAN('n', "no-samples", &no_samples, + "don't sample"), OPT_END() }; diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 5eb5566f0c9..135b7837e6b 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -15,8 +15,11 @@ #include "util/rbtree.h" #include "util/symbol.h" #include "util/string.h" +#include "util/callchain.h" +#include "util/strlist.h" #include "perf.h" +#include "util/header.h" #include "util/parse-options.h" #include "util/parse-events.h" @@ -30,6 +33,8 @@ static char *vmlinux = NULL; static char default_sort_order[] = "comm,dso"; static char *sort_order = default_sort_order; +static char *dso_list_str, *comm_list_str, *sym_list_str; +static struct strlist *dso_list, *comm_list, *sym_list; static int input; static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV; @@ -51,6 +56,9 @@ static char *parent_pattern = default_parent_pattern; static regex_t parent_regex; static int exclude_other = 1; +static int callchain; + +static u64 sample_type; struct ip_event { struct perf_event_header header; @@ -59,11 +67,6 @@ struct ip_event { unsigned char __more_data[]; }; -struct ip_callchain { - u64 nr; - u64 ips[0]; -}; - struct mmap_event { struct perf_event_header header; u32 pid, tid; @@ -97,6 +100,13 @@ struct lost_event { u64 lost; }; +struct read_event { + struct perf_event_header header; + u32 pid,tid; + u64 value; + u64 format[3]; +}; + typedef union event_union { struct perf_event_header header; struct ip_event ip; @@ -105,6 +115,7 @@ typedef union event_union { struct fork_event fork; struct period_event period; struct lost_event lost; + struct read_event read; } event_t; static LIST_HEAD(dsos); @@ -229,7 +240,7 @@ static u64 vdso__map_ip(struct map *map, u64 ip) static inline int is_anon_memory(const char *filename) { - return strcmp(filename, "//anon") == 0; + return strcmp(filename, "//anon") == 0; } static struct map *map__new(struct mmap_event *event) @@ -400,9 +411,27 @@ static void thread__insert_map(struct thread *self, struct map *map) list_for_each_entry_safe(pos, tmp, &self->maps, node) { if (map__overlap(pos, map)) { - list_del_init(&pos->node); - /* XXX leaks dsos */ - free(pos); + if (verbose >= 2) { + printf("overlapping maps:\n"); + map__fprintf(map, stdout); + map__fprintf(pos, stdout); + } + + if (map->start <= pos->start && map->end > pos->start) + pos->start = map->end; + + if (map->end >= pos->end && map->start < pos->end) + pos->end = map->start; + + if (verbose >= 2) { + printf("after collision:\n"); + map__fprintf(pos, stdout); + } + + if (pos->start >= pos->end) { + list_del_init(&pos->node); + free(pos); + } } } @@ -464,17 +493,19 @@ static size_t threads__fprintf(FILE *fp) static struct rb_root hist; struct hist_entry { - struct rb_node rb_node; - - struct thread *thread; - struct map *map; - struct dso *dso; - struct symbol *sym; - struct symbol *parent; - u64 ip; - char level; - - u64 count; + struct rb_node rb_node; + + struct thread *thread; + struct map *map; + struct dso *dso; + struct symbol *sym; + struct symbol *parent; + u64 ip; + char level; + struct callchain_node callchain; + struct rb_root sorted_chain; + + u64 count; }; /* @@ -745,6 +776,48 @@ hist_entry__collapse(struct hist_entry *left, struct hist_entry *right) } static size_t +callchain__fprintf(FILE *fp, struct callchain_node *self, u64 total_samples) +{ + struct callchain_list *chain; + size_t ret = 0; + + if (!self) + return 0; + + ret += callchain__fprintf(fp, self->parent, total_samples); + + + list_for_each_entry(chain, &self->val, list) + ret += fprintf(fp, " %p\n", (void *)chain->ip); + + return ret; +} + +static size_t +hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self, + u64 total_samples) +{ + struct rb_node *rb_node; + struct callchain_node *chain; + size_t ret = 0; + + rb_node = rb_first(&self->sorted_chain); + while (rb_node) { + double percent; + + chain = rb_entry(rb_node, struct callchain_node, rb_node); + percent = chain->hit * 100.0 / total_samples; + ret += fprintf(fp, " %6.2f%%\n", percent); + ret += callchain__fprintf(fp, chain, total_samples); + ret += fprintf(fp, "\n"); + rb_node = rb_next(rb_node); + } + + return ret; +} + + +static size_t hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples) { struct sort_entry *se; @@ -784,6 +857,9 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples) ret += fprintf(fp, "\n"); + if (callchain) + hist_entry_callchain__fprintf(fp, self, total_samples); + return ret; } @@ -797,7 +873,7 @@ resolve_symbol(struct thread *thread, struct map **mapp, { struct dso *dso = dsop ? *dsop : NULL; struct map *map = mapp ? *mapp : NULL; - uint64_t ip = *ipp; + u64 ip = *ipp; if (!thread) return NULL; @@ -814,7 +890,6 @@ resolve_symbol(struct thread *thread, struct map **mapp, *mapp = map; got_map: ip = map->map_ip(map, ip); - *ipp = ip; dso = map->dso; } else { @@ -828,6 +903,8 @@ got_map: dso = kernel_dso; } dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>"); + dprintf(" ...... map: %Lx -> %Lx\n", *ipp, ip); + *ipp = ip; if (dsop) *dsop = dso; @@ -867,6 +944,7 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, .level = level, .count = count, .parent = NULL, + .sorted_chain = RB_ROOT }; int cmp; @@ -909,6 +987,8 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, if (!cmp) { he->count += count; + if (callchain) + append_chain(&he->callchain, chain); return 0; } @@ -922,6 +1002,10 @@ hist_entry__add(struct thread *thread, struct map *map, struct dso *dso, if (!he) return -ENOMEM; *he = entry; + if (callchain) { + callchain_init(&he->callchain); + append_chain(&he->callchain, chain); + } rb_link_node(&he->rb_node, parent, p); rb_insert_color(&he->rb_node, &hist); @@ -998,6 +1082,9 @@ static void output__insert_entry(struct hist_entry *he) struct rb_node *parent = NULL; struct hist_entry *iter; + if (callchain) + sort_chain_to_rbtree(&he->sorted_chain, &he->callchain); + while (*p != NULL) { parent = *p; iter = rb_entry(parent, struct hist_entry, rb_node); @@ -1115,7 +1202,7 @@ static int validate_chain(struct ip_callchain *chain, event_t *event) } static int -process_overflow_event(event_t *event, unsigned long offset, unsigned long head) +process_sample_event(event_t *event, unsigned long offset, unsigned long head) { char level; int show = 0; @@ -1127,12 +1214,12 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head) void *more_data = event->ip.__more_data; struct ip_callchain *chain = NULL; - if (event->header.type & PERF_SAMPLE_PERIOD) { + if (sample_type & PERF_SAMPLE_PERIOD) { period = *(u64 *)more_data; more_data += sizeof(u64); } - dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n", + dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d: %p period: %Ld\n", (void *)(offset + head), (void *)(long)(event->header.size), event->header.misc, @@ -1140,7 +1227,7 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head) (void *)(long)ip, (long long)period); - if (event->header.type & PERF_SAMPLE_CALLCHAIN) { + if (sample_type & PERF_SAMPLE_CALLCHAIN) { int i; chain = (void *)more_data; @@ -1166,6 +1253,9 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head) return -1; } + if (comm_list && !strlist__has_entry(comm_list, thread->comm)) + return 0; + if (event->header.misc & PERF_EVENT_MISC_KERNEL) { show = SHOW_KERNEL; level = 'k'; @@ -1188,6 +1278,12 @@ process_overflow_event(event_t *event, unsigned long offset, unsigned long head) if (show & show_mask) { struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip); + if (dso_list && dso && dso->name && !strlist__has_entry(dso_list, dso->name)) + return 0; + + if (sym_list && sym && !strlist__has_entry(sym_list, sym->name)) + return 0; + if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) { eprintf("problem incrementing symbol count, skipping event\n"); return -1; @@ -1328,14 +1424,27 @@ static void trace_event(event_t *event) } static int +process_read_event(event_t *event, unsigned long offset, unsigned long head) +{ + dprintf("%p [%p]: PERF_EVENT_READ: %d %d %Lu\n", + (void *)(offset + head), + (void *)(long)(event->header.size), + event->read.pid, + event->read.tid, + event->read.value); + + return 0; +} + +static int process_event(event_t *event, unsigned long offset, unsigned long head) { trace_event(event); - if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) - return process_overflow_event(event, offset, head); - switch (event->header.type) { + case PERF_EVENT_SAMPLE: + return process_sample_event(event, offset, head); + case PERF_EVENT_MMAP: return process_mmap_event(event, offset, head); @@ -1351,6 +1460,9 @@ process_event(event_t *event, unsigned long offset, unsigned long head) case PERF_EVENT_LOST: return process_lost_event(event, offset, head); + case PERF_EVENT_READ: + return process_read_event(event, offset, head); + /* * We dont process them right now but they are fine: */ @@ -1366,13 +1478,30 @@ process_event(event_t *event, unsigned long offset, unsigned long head) return 0; } -static struct perf_file_header file_header; +static struct perf_header *header; + +static u64 perf_header__sample_type(void) +{ + u64 sample_type = 0; + int i; + + for (i = 0; i < header->attrs; i++) { + struct perf_header_attr *attr = header->attr[i]; + + if (!sample_type) + sample_type = attr->attr.sample_type; + else if (sample_type != attr->attr.sample_type) + die("non matching sample_type"); + } + + return sample_type; +} static int __cmd_report(void) { int ret, rc = EXIT_FAILURE; unsigned long offset = 0; - unsigned long head = sizeof(file_header); + unsigned long head, shift; struct stat stat; event_t *event; uint32_t size; @@ -1400,13 +1529,12 @@ static int __cmd_report(void) exit(0); } - if (read(input, &file_header, sizeof(file_header)) == -1) { - perror("failed to read file headers"); - exit(-1); - } + header = perf_header__read(input); + head = header->data_offset; - if (sort__has_parent && - !(file_header.sample_type & PERF_SAMPLE_CALLCHAIN)) { + sample_type = perf_header__sample_type(); + + if (sort__has_parent && !(sample_type & PERF_SAMPLE_CALLCHAIN)) { fprintf(stderr, "selected --sort parent, but no callchain data\n"); exit(-1); } @@ -1426,6 +1554,11 @@ static int __cmd_report(void) cwd = NULL; cwdlen = 0; } + + shift = page_size * (head / page_size); + offset += shift; + head -= shift; + remap: buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ, MAP_SHARED, input, offset); @@ -1442,9 +1575,10 @@ more: size = 8; if (head + event->header.size >= page_size * mmap_window) { - unsigned long shift = page_size * (head / page_size); int ret; + shift = page_size * (head / page_size); + ret = munmap(buf, page_size * mmap_window); assert(ret == 0); @@ -1482,7 +1616,7 @@ more: head += size; - if (offset + head >= sizeof(file_header) + file_header.data_size) + if (offset + head >= header->data_offset + header->data_size) goto done; if (offset + head < stat.st_size) @@ -1536,6 +1670,13 @@ static const struct option options[] = { "regex filter to identify parent, see: '--sort parent'"), OPT_BOOLEAN('x', "exclude-other", &exclude_other, "Only display entries with parent-match"), + OPT_BOOLEAN('c', "callchain", &callchain, "Display callchains"), + OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]", + "only consider symbols in these dsos"), + OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]", + "only consider symbols in these comms"), + OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]", + "only consider these symbols"), OPT_END() }; @@ -1554,6 +1695,19 @@ static void setup_sorting(void) free(str); } +static void setup_list(struct strlist **list, const char *list_str, + const char *list_name) +{ + if (list_str) { + *list = strlist__new(true, list_str); + if (!*list) { + fprintf(stderr, "problems parsing %s list\n", + list_name); + exit(129); + } + } +} + int cmd_report(int argc, const char **argv, const char *prefix) { symbol__init(); @@ -1575,6 +1729,10 @@ int cmd_report(int argc, const char **argv, const char *prefix) if (argc) usage_with_options(report_usage, options); + setup_list(&dso_list, dso_list_str, "dso"); + setup_list(&comm_list, comm_list_str, "comm"); + setup_list(&sym_list, sym_list_str, "symbol"); + setup_pager(); return __cmd_report(); diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 6d3eeac1ea2..2e03524a1de 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -32,6 +32,7 @@ * Wu Fengguang <fengguang.wu@intel.com> * Mike Galbraith <efault@gmx.de> * Paul Mackerras <paulus@samba.org> + * Jaswinder Singh Rajput <jaswinder@kernel.org> * * Released under the GPL v2. (and only v2, not any later version) */ @@ -45,7 +46,7 @@ #include <sys/prctl.h> #include <math.h> -static struct perf_counter_attr default_attrs[MAX_COUNTERS] = { +static struct perf_counter_attr default_attrs[] = { { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, @@ -59,42 +60,28 @@ static struct perf_counter_attr default_attrs[MAX_COUNTERS] = { }; +#define MAX_RUN 100 + static int system_wide = 0; -static int inherit = 1; static int verbose = 0; - -static int fd[MAX_NR_CPUS][MAX_COUNTERS]; - -static int target_pid = -1; static int nr_cpus = 0; -static unsigned int page_size; +static int run_idx = 0; +static int run_count = 1; +static int inherit = 1; static int scale = 1; +static int target_pid = -1; +static int null_run = 0; -static const unsigned int default_count[] = { - 1000000, - 1000000, - 10000, - 10000, - 1000000, - 10000, -}; - -#define MAX_RUN 100 - -static int run_count = 1; -static int run_idx = 0; - -static u64 event_res[MAX_RUN][MAX_COUNTERS][3]; -static u64 event_scaled[MAX_RUN][MAX_COUNTERS]; - -//static u64 event_hist[MAX_RUN][MAX_COUNTERS][3]; - +static int fd[MAX_NR_CPUS][MAX_COUNTERS]; static u64 runtime_nsecs[MAX_RUN]; static u64 walltime_nsecs[MAX_RUN]; static u64 runtime_cycles[MAX_RUN]; +static u64 event_res[MAX_RUN][MAX_COUNTERS][3]; +static u64 event_scaled[MAX_RUN][MAX_COUNTERS]; + static u64 event_res_avg[MAX_COUNTERS][3]; static u64 event_res_noise[MAX_COUNTERS][3]; @@ -109,7 +96,10 @@ static u64 walltime_nsecs_noise; static u64 runtime_cycles_avg; static u64 runtime_cycles_noise; -static void create_perf_stat_counter(int counter) +#define ERR_PERF_OPEN \ +"Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n" + +static void create_perf_stat_counter(int counter, int pid) { struct perf_counter_attr *attr = attrs + counter; @@ -119,20 +109,21 @@ static void create_perf_stat_counter(int counter) if (system_wide) { int cpu; - for (cpu = 0; cpu < nr_cpus; cpu ++) { + for (cpu = 0; cpu < nr_cpus; cpu++) { fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0); - if (fd[cpu][counter] < 0 && verbose) { - printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno)); - } + if (fd[cpu][counter] < 0 && verbose) + fprintf(stderr, ERR_PERF_OPEN, counter, + fd[cpu][counter], strerror(errno)); } } else { - attr->inherit = inherit; - attr->disabled = 1; - - fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0); - if (fd[0][counter] < 0 && verbose) { - printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno)); - } + attr->inherit = inherit; + attr->disabled = 1; + attr->enable_on_exec = 1; + + fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0); + if (fd[0][counter] < 0 && verbose) + fprintf(stderr, ERR_PERF_OPEN, counter, + fd[0][counter], strerror(errno)); } } @@ -168,7 +159,7 @@ static void read_counter(int counter) count[0] = count[1] = count[2] = 0; nv = scale ? 3 : 1; - for (cpu = 0; cpu < nr_cpus; cpu ++) { + for (cpu = 0; cpu < nr_cpus; cpu++) { if (fd[cpu][counter] < 0) continue; @@ -215,32 +206,67 @@ static int run_perf_stat(int argc, const char **argv) int status = 0; int counter; int pid; + int child_ready_pipe[2], go_pipe[2]; + char buf; if (!system_wide) nr_cpus = 1; - for (counter = 0; counter < nr_counters; counter++) - create_perf_stat_counter(counter); - - /* - * Enable counters and exec the command: - */ - t0 = rdclock(); - prctl(PR_TASK_PERF_COUNTERS_ENABLE); + if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) { + perror("failed to create pipes"); + exit(1); + } if ((pid = fork()) < 0) perror("failed to fork"); if (!pid) { - if (execvp(argv[0], (char **)argv)) { - perror(argv[0]); - exit(-1); - } + close(child_ready_pipe[0]); + close(go_pipe[1]); + fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC); + + /* + * Do a dummy execvp to get the PLT entry resolved, + * so we avoid the resolver overhead on the real + * execvp call. + */ + execvp("", (char **)argv); + + /* + * Tell the parent we're ready to go + */ + close(child_ready_pipe[1]); + + /* + * Wait until the parent tells us to go. + */ + read(go_pipe[0], &buf, 1); + + execvp(argv[0], (char **)argv); + + perror(argv[0]); + exit(-1); } + /* + * Wait for the child to be ready to exec. + */ + close(child_ready_pipe[1]); + close(go_pipe[0]); + read(child_ready_pipe[0], &buf, 1); + close(child_ready_pipe[0]); + + for (counter = 0; counter < nr_counters; counter++) + create_perf_stat_counter(counter, pid); + + /* + * Enable counters and exec the command: + */ + t0 = rdclock(); + + close(go_pipe[1]); wait(&status); - prctl(PR_TASK_PERF_COUNTERS_DISABLE); t1 = rdclock(); walltime_nsecs[run_idx] = t1 - t0; @@ -262,7 +288,7 @@ static void nsec_printout(int counter, u64 *count, u64 *noise) { double msecs = (double)count[0] / 1000000; - fprintf(stderr, " %14.6f %-20s", msecs, event_name(counter)); + fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter)); if (attrs[counter].type == PERF_TYPE_SOFTWARE && attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) { @@ -276,7 +302,7 @@ static void nsec_printout(int counter, u64 *count, u64 *noise) static void abs_printout(int counter, u64 *count, u64 *noise) { - fprintf(stderr, " %14Ld %-20s", count[0], event_name(counter)); + fprintf(stderr, " %14Ld %-24s", count[0], event_name(counter)); if (runtime_cycles_avg && attrs[counter].type == PERF_TYPE_HARDWARE && @@ -306,7 +332,7 @@ static void print_counter(int counter) scaled = event_scaled_avg[counter]; if (scaled == -1) { - fprintf(stderr, " %14s %-20s\n", + fprintf(stderr, " %14s %-24s\n", "<not counted>", event_name(counter)); return; } @@ -364,8 +390,11 @@ static void calc_avg(void) event_res_avg[j]+1, event_res[i][j]+1); update_avg("counter/2", j, event_res_avg[j]+2, event_res[i][j]+2); - update_avg("scaled", j, - event_scaled_avg + j, event_scaled[i]+j); + if (event_scaled[i][j] != -1) + update_avg("scaled", j, + event_scaled_avg + j, event_scaled[i]+j); + else + event_scaled_avg[j] = -1; } } runtime_nsecs_avg /= run_count; @@ -429,11 +458,14 @@ static void print_stat(int argc, const char **argv) for (counter = 0; counter < nr_counters; counter++) print_counter(counter); - fprintf(stderr, "\n"); - fprintf(stderr, " %14.9f seconds time elapsed.\n", + fprintf(stderr, " %14.9f seconds time elapsed", (double)walltime_nsecs_avg/1e9); - fprintf(stderr, "\n"); + if (run_count > 1) { + fprintf(stderr, " ( +- %7.3f%% )", + 100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg); + } + fprintf(stderr, "\n\n"); } static volatile int signr = -1; @@ -466,13 +498,15 @@ static const struct option options[] = { OPT_INTEGER('p', "pid", &target_pid, "stat events on existing pid"), OPT_BOOLEAN('a', "all-cpus", &system_wide, - "system-wide collection from all CPUs"), + "system-wide collection from all CPUs"), OPT_BOOLEAN('S', "scale", &scale, - "scale/normalize counters"), + "scale/normalize counters"), OPT_BOOLEAN('v', "verbose", &verbose, "be more verbose (show counter open errors, etc)"), OPT_INTEGER('r', "repeat", &run_count, "repeat command and print average + stddev (max: 100)"), + OPT_BOOLEAN('n', "null", &null_run, + "null run - dont start any counters"), OPT_END() }; @@ -480,18 +514,17 @@ int cmd_stat(int argc, const char **argv, const char *prefix) { int status; - page_size = sysconf(_SC_PAGE_SIZE); - - memcpy(attrs, default_attrs, sizeof(attrs)); - argc = parse_options(argc, argv, options, stat_usage, 0); if (!argc) usage_with_options(stat_usage, options); if (run_count <= 0 || run_count > MAX_RUN) usage_with_options(stat_usage, options); - if (!nr_counters) - nr_counters = 8; + /* Set attrs and nr_counters if no event is selected and !null_run */ + if (!null_run && !nr_counters) { + memcpy(attrs, default_attrs, sizeof(default_attrs)); + nr_counters = ARRAY_SIZE(default_attrs); + } nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); assert(nr_cpus <= MAX_NR_CPUS); @@ -511,7 +544,7 @@ int cmd_stat(int argc, const char **argv, const char *prefix) status = 0; for (run_idx = 0; run_idx < run_count; run_idx++) { if (run_count != 1 && verbose) - fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx+1); + fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1); status = run_perf_stat(argc, argv); } diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 5352b5e352e..cf0d21f1ae1 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -392,11 +392,11 @@ static void record_ip(u64 ip, int counter) samples--; } -static void process_event(u64 ip, int counter) +static void process_event(u64 ip, int counter, int user) { samples++; - if (ip < min_ip || ip > max_ip) { + if (user) { userspace_samples++; return; } @@ -509,9 +509,10 @@ static void mmap_read_counter(struct mmap_data *md) old += size; - if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) { - if (event->header.type & PERF_SAMPLE_IP) - process_event(event->ip.ip, md->counter); + if (event->header.type == PERF_EVENT_SAMPLE) { + int user = + (event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK) == PERF_EVENT_MISC_USER; + process_event(event->ip.ip, md->counter, user); } } diff --git a/tools/perf/perf.h b/tools/perf/perf.h index ceb68aa51f7..d3042a6ba03 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -19,13 +19,29 @@ #define cpu_relax() asm volatile("" ::: "memory"); #endif +#ifdef __sh__ +#include "../../arch/sh/include/asm/unistd.h" +#if defined(__SH4A__) || defined(__SH5__) +# define rmb() asm volatile("synco" ::: "memory") +#else +# define rmb() asm volatile("" ::: "memory") +#endif +#define cpu_relax() asm volatile("" ::: "memory") +#endif + +#ifdef __hppa__ +#include "../../arch/parisc/include/asm/unistd.h" +#define rmb() asm volatile("" ::: "memory") +#define cpu_relax() asm volatile("" ::: "memory"); +#endif + #include <time.h> #include <unistd.h> #include <sys/types.h> #include <sys/syscall.h> #include "../../include/linux/perf_counter.h" -#include "types.h" +#include "util/types.h" /* * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all @@ -72,10 +88,9 @@ sys_perf_counter_open(struct perf_counter_attr *attr, #define MAX_COUNTERS 256 #define MAX_NR_CPUS 256 -struct perf_file_header { - u64 version; - u64 sample_type; - u64 data_size; +struct ip_callchain { + u64 nr; + u64 ips[0]; }; #endif diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c new file mode 100644 index 00000000000..ad3c2857896 --- /dev/null +++ b/tools/perf/util/callchain.c @@ -0,0 +1,174 @@ +/* + * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com> + * + * Handle the callchains from the stream in an ad-hoc radix tree and then + * sort them in an rbtree. + * + */ + +#include <stdlib.h> +#include <stdio.h> +#include <stdbool.h> +#include <errno.h> + +#include "callchain.h" + + +static void rb_insert_callchain(struct rb_root *root, struct callchain_node *chain) +{ + struct rb_node **p = &root->rb_node; + struct rb_node *parent = NULL; + struct callchain_node *rnode; + + while (*p) { + parent = *p; + rnode = rb_entry(parent, struct callchain_node, rb_node); + + if (rnode->hit < chain->hit) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&chain->rb_node, parent, p); + rb_insert_color(&chain->rb_node, root); +} + +/* + * Once we get every callchains from the stream, we can now + * sort them by hit + */ +void sort_chain_to_rbtree(struct rb_root *rb_root, struct callchain_node *node) +{ + struct callchain_node *child; + + list_for_each_entry(child, &node->children, brothers) + sort_chain_to_rbtree(rb_root, child); + + if (node->hit) + rb_insert_callchain(rb_root, node); +} + +static struct callchain_node *create_child(struct callchain_node *parent) +{ + struct callchain_node *new; + + new = malloc(sizeof(*new)); + if (!new) { + perror("not enough memory to create child for code path tree"); + return NULL; + } + new->parent = parent; + INIT_LIST_HEAD(&new->children); + INIT_LIST_HEAD(&new->val); + list_add_tail(&new->brothers, &parent->children); + + return new; +} + +static void +fill_node(struct callchain_node *node, struct ip_callchain *chain, int start) +{ + int i; + + for (i = start; i < chain->nr; i++) { + struct callchain_list *call; + + call = malloc(sizeof(*chain)); + if (!call) { + perror("not enough memory for the code path tree"); + return; + } + call->ip = chain->ips[i]; + list_add_tail(&call->list, &node->val); + } + node->val_nr = i - start; +} + +static void add_child(struct callchain_node *parent, struct ip_callchain *chain) +{ + struct callchain_node *new; + + new = create_child(parent); + fill_node(new, chain, parent->val_nr); + + new->hit = 1; +} + +static void +split_add_child(struct callchain_node *parent, struct ip_callchain *chain, + struct callchain_list *to_split, int idx) +{ + struct callchain_node *new; + + /* split */ + new = create_child(parent); + list_move_tail(&to_split->list, &new->val); + new->hit = parent->hit; + parent->hit = 0; + parent->val_nr = idx; + + /* create the new one */ + add_child(parent, chain); +} + +static int +__append_chain(struct callchain_node *root, struct ip_callchain *chain, + int start); + +static int +__append_chain_children(struct callchain_node *root, struct ip_callchain *chain) +{ + struct callchain_node *rnode; + + /* lookup in childrens */ + list_for_each_entry(rnode, &root->children, brothers) { + int ret = __append_chain(rnode, chain, root->val_nr); + if (!ret) + return 0; + } + return -1; +} + +static int +__append_chain(struct callchain_node *root, struct ip_callchain *chain, + int start) +{ + struct callchain_list *cnode; + int i = start; + bool found = false; + + /* lookup in the current node */ + list_for_each_entry(cnode, &root->val, list) { + if (cnode->ip != chain->ips[i++]) + break; + if (!found) + found = true; + if (i == chain->nr) + break; + } + + /* matches not, relay on the parent */ + if (!found) + return -1; + + /* we match only a part of the node. Split it and add the new chain */ + if (i < root->val_nr) { + split_add_child(root, chain, cnode, i); + return 0; + } + + /* we match 100% of the path, increment the hit */ + if (i == root->val_nr) { + root->hit++; + return 0; + } + + return __append_chain_children(root, chain); +} + +void append_chain(struct callchain_node *root, struct ip_callchain *chain) +{ + if (__append_chain_children(root, chain) == -1) + add_child(root, chain); +} diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h new file mode 100644 index 00000000000..fa1cd2f71fd --- /dev/null +++ b/tools/perf/util/callchain.h @@ -0,0 +1,33 @@ +#ifndef __PERF_CALLCHAIN_H +#define __PERF_CALLCHAIN_H + +#include "../perf.h" +#include "list.h" +#include "rbtree.h" + + +struct callchain_node { + struct callchain_node *parent; + struct list_head brothers; + struct list_head children; + struct list_head val; + struct rb_node rb_node; + int val_nr; + int hit; +}; + +struct callchain_list { + unsigned long ip; + struct list_head list; +}; + +static inline void callchain_init(struct callchain_node *node) +{ + INIT_LIST_HEAD(&node->brothers); + INIT_LIST_HEAD(&node->children); + INIT_LIST_HEAD(&node->val); +} + +void append_chain(struct callchain_node *root, struct ip_callchain *chain); +void sort_chain_to_rbtree(struct rb_root *rb_root, struct callchain_node *node); +#endif diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c new file mode 100644 index 00000000000..450384b3bbe --- /dev/null +++ b/tools/perf/util/header.c @@ -0,0 +1,242 @@ +#include <sys/types.h> +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> + +#include "util.h" +#include "header.h" + +/* + * + */ + +struct perf_header_attr *perf_header_attr__new(struct perf_counter_attr *attr) +{ + struct perf_header_attr *self = malloc(sizeof(*self)); + + if (!self) + die("nomem"); + + self->attr = *attr; + self->ids = 0; + self->size = 1; + self->id = malloc(sizeof(u64)); + + if (!self->id) + die("nomem"); + + return self; +} + +void perf_header_attr__add_id(struct perf_header_attr *self, u64 id) +{ + int pos = self->ids; + + self->ids++; + if (self->ids > self->size) { + self->size *= 2; + self->id = realloc(self->id, self->size * sizeof(u64)); + if (!self->id) + die("nomem"); + } + self->id[pos] = id; +} + +/* + * + */ + +struct perf_header *perf_header__new(void) +{ + struct perf_header *self = malloc(sizeof(*self)); + + if (!self) + die("nomem"); + + self->frozen = 0; + + self->attrs = 0; + self->size = 1; + self->attr = malloc(sizeof(void *)); + + if (!self->attr) + die("nomem"); + + self->data_offset = 0; + self->data_size = 0; + + return self; +} + +void perf_header__add_attr(struct perf_header *self, + struct perf_header_attr *attr) +{ + int pos = self->attrs; + + if (self->frozen) + die("frozen"); + + self->attrs++; + if (self->attrs > self->size) { + self->size *= 2; + self->attr = realloc(self->attr, self->size * sizeof(void *)); + if (!self->attr) + die("nomem"); + } + self->attr[pos] = attr; +} + +static const char *__perf_magic = "PERFFILE"; + +#define PERF_MAGIC (*(u64 *)__perf_magic) + +struct perf_file_section { + u64 offset; + u64 size; +}; + +struct perf_file_attr { + struct perf_counter_attr attr; + struct perf_file_section ids; +}; + +struct perf_file_header { + u64 magic; + u64 size; + u64 attr_size; + struct perf_file_section attrs; + struct perf_file_section data; +}; + +static void do_write(int fd, void *buf, size_t size) +{ + while (size) { + int ret = write(fd, buf, size); + + if (ret < 0) + die("failed to write"); + + size -= ret; + buf += ret; + } +} + +void perf_header__write(struct perf_header *self, int fd) +{ + struct perf_file_header f_header; + struct perf_file_attr f_attr; + struct perf_header_attr *attr; + int i; + + lseek(fd, sizeof(f_header), SEEK_SET); + + + for (i = 0; i < self->attrs; i++) { + attr = self->attr[i]; + + attr->id_offset = lseek(fd, 0, SEEK_CUR); + do_write(fd, attr->id, attr->ids * sizeof(u64)); + } + + + self->attr_offset = lseek(fd, 0, SEEK_CUR); + + for (i = 0; i < self->attrs; i++) { + attr = self->attr[i]; + + f_attr = (struct perf_file_attr){ + .attr = attr->attr, + .ids = { + .offset = attr->id_offset, + .size = attr->ids * sizeof(u64), + } + }; + do_write(fd, &f_attr, sizeof(f_attr)); + } + + + self->data_offset = lseek(fd, 0, SEEK_CUR); + + f_header = (struct perf_file_header){ + .magic = PERF_MAGIC, + .size = sizeof(f_header), + .attr_size = sizeof(f_attr), + .attrs = { + .offset = self->attr_offset, + .size = self->attrs * sizeof(f_attr), + }, + .data = { + .offset = self->data_offset, + .size = self->data_size, + }, + }; + + lseek(fd, 0, SEEK_SET); + do_write(fd, &f_header, sizeof(f_header)); + lseek(fd, self->data_offset + self->data_size, SEEK_SET); + + self->frozen = 1; +} + +static void do_read(int fd, void *buf, size_t size) +{ + while (size) { + int ret = read(fd, buf, size); + + if (ret < 0) + die("failed to read"); + + size -= ret; + buf += ret; + } +} + +struct perf_header *perf_header__read(int fd) +{ + struct perf_header *self = perf_header__new(); + struct perf_file_header f_header; + struct perf_file_attr f_attr; + u64 f_id; + + int nr_attrs, nr_ids, i, j; + + lseek(fd, 0, SEEK_SET); + do_read(fd, &f_header, sizeof(f_header)); + + if (f_header.magic != PERF_MAGIC || + f_header.size != sizeof(f_header) || + f_header.attr_size != sizeof(f_attr)) + die("incompatible file format"); + + nr_attrs = f_header.attrs.size / sizeof(f_attr); + lseek(fd, f_header.attrs.offset, SEEK_SET); + + for (i = 0; i < nr_attrs; i++) { + struct perf_header_attr *attr; + off_t tmp = lseek(fd, 0, SEEK_CUR); + + do_read(fd, &f_attr, sizeof(f_attr)); + + attr = perf_header_attr__new(&f_attr.attr); + + nr_ids = f_attr.ids.size / sizeof(u64); + lseek(fd, f_attr.ids.offset, SEEK_SET); + + for (j = 0; j < nr_ids; j++) { + do_read(fd, &f_id, sizeof(f_id)); + + perf_header_attr__add_id(attr, f_id); + } + perf_header__add_attr(self, attr); + lseek(fd, tmp, SEEK_SET); + } + + self->data_offset = f_header.data.offset; + self->data_size = f_header.data.size; + + lseek(fd, self->data_offset + self->data_size, SEEK_SET); + + self->frozen = 1; + + return self; +} diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h new file mode 100644 index 00000000000..b5ef53ad4c7 --- /dev/null +++ b/tools/perf/util/header.h @@ -0,0 +1,37 @@ +#ifndef _PERF_HEADER_H +#define _PERF_HEADER_H + +#include "../../../include/linux/perf_counter.h" +#include <sys/types.h> +#include "types.h" + +struct perf_header_attr { + struct perf_counter_attr attr; + int ids, size; + u64 *id; + off_t id_offset; +}; + +struct perf_header { + int frozen; + int attrs, size; + struct perf_header_attr **attr; + off_t attr_offset; + u64 data_offset; + u64 data_size; +}; + +struct perf_header *perf_header__read(int fd); +void perf_header__write(struct perf_header *self, int fd); + +void perf_header__add_attr(struct perf_header *self, + struct perf_header_attr *attr); + +struct perf_header_attr * +perf_header_attr__new(struct perf_counter_attr *attr); +void perf_header_attr__add_id(struct perf_header_attr *self, u64 id); + + +struct perf_header *perf_header__new(void); + +#endif /* _PERF_HEADER_H */ diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c index 6653f7dd1d7..17a00e0df2c 100644 --- a/tools/perf/util/help.c +++ b/tools/perf/util/help.c @@ -126,21 +126,6 @@ static int is_executable(const char *name) !S_ISREG(st.st_mode)) return 0; -#ifdef __MINGW32__ - /* cannot trust the executable bit, peek into the file instead */ - char buf[3] = { 0 }; - int n; - int fd = open(name, O_RDONLY); - st.st_mode &= ~S_IXUSR; - if (fd >= 0) { - n = read(fd, buf, 2); - if (n == 2) - /* DOS executables start with "MZ" */ - if (!strcmp(buf, "#!") || !strcmp(buf, "MZ")) - st.st_mode |= S_IXUSR; - close(fd); - } -#endif return st.st_mode & S_IXUSR; } diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c index a28bccae545..1915de20dca 100644 --- a/tools/perf/util/pager.c +++ b/tools/perf/util/pager.c @@ -9,7 +9,6 @@ static int spawned_pager; -#ifndef __MINGW32__ static void pager_preexec(void) { /* @@ -24,7 +23,6 @@ static void pager_preexec(void) setenv("LESS", "FRSX", 0); } -#endif static const char *pager_argv[] = { "sh", "-c", NULL, NULL }; static struct child_process pager_process; @@ -70,9 +68,8 @@ void setup_pager(void) pager_argv[2] = pager; pager_process.argv = pager_argv; pager_process.in = -1; -#ifndef __MINGW32__ pager_process.preexec_cb = pager_preexec; -#endif + if (start_command(&pager_process)) return; diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 35d04da38d6..4d042f104cd 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -16,32 +16,28 @@ struct event_symbol { u8 type; u64 config; char *symbol; + char *alias; }; -#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y -#define CR(x, y) .type = PERF_TYPE_##x, .config = y +#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x +#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x static struct event_symbol event_symbols[] = { - { C(HARDWARE, HW_CPU_CYCLES), "cpu-cycles", }, - { C(HARDWARE, HW_CPU_CYCLES), "cycles", }, - { C(HARDWARE, HW_INSTRUCTIONS), "instructions", }, - { C(HARDWARE, HW_CACHE_REFERENCES), "cache-references", }, - { C(HARDWARE, HW_CACHE_MISSES), "cache-misses", }, - { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions", }, - { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches", }, - { C(HARDWARE, HW_BRANCH_MISSES), "branch-misses", }, - { C(HARDWARE, HW_BUS_CYCLES), "bus-cycles", }, - - { C(SOFTWARE, SW_CPU_CLOCK), "cpu-clock", }, - { C(SOFTWARE, SW_TASK_CLOCK), "task-clock", }, - { C(SOFTWARE, SW_PAGE_FAULTS), "page-faults", }, - { C(SOFTWARE, SW_PAGE_FAULTS), "faults", }, - { C(SOFTWARE, SW_PAGE_FAULTS_MIN), "minor-faults", }, - { C(SOFTWARE, SW_PAGE_FAULTS_MAJ), "major-faults", }, - { C(SOFTWARE, SW_CONTEXT_SWITCHES), "context-switches", }, - { C(SOFTWARE, SW_CONTEXT_SWITCHES), "cs", }, - { C(SOFTWARE, SW_CPU_MIGRATIONS), "cpu-migrations", }, - { C(SOFTWARE, SW_CPU_MIGRATIONS), "migrations", }, + { CHW(CPU_CYCLES), "cpu-cycles", "cycles" }, + { CHW(INSTRUCTIONS), "instructions", "" }, + { CHW(CACHE_REFERENCES), "cache-references", "" }, + { CHW(CACHE_MISSES), "cache-misses", "" }, + { CHW(BRANCH_INSTRUCTIONS), "branch-instructions", "branches" }, + { CHW(BRANCH_MISSES), "branch-misses", "" }, + { CHW(BUS_CYCLES), "bus-cycles", "" }, + + { CSW(CPU_CLOCK), "cpu-clock", "" }, + { CSW(TASK_CLOCK), "task-clock", "" }, + { CSW(PAGE_FAULTS), "page-faults", "faults" }, + { CSW(PAGE_FAULTS_MIN), "minor-faults", "" }, + { CSW(PAGE_FAULTS_MAJ), "major-faults", "" }, + { CSW(CONTEXT_SWITCHES), "context-switches", "cs" }, + { CSW(CPU_MIGRATIONS), "cpu-migrations", "migrations" }, }; #define __PERF_COUNTER_FIELD(config, name) \ @@ -74,26 +70,70 @@ static char *sw_event_names[] = { #define MAX_ALIASES 8 -static char *hw_cache [][MAX_ALIASES] = { - { "L1-data" , "l1-d", "l1d" }, - { "L1-instruction" , "l1-i", "l1i" }, - { "L2" , "l2" }, - { "Data-TLB" , "dtlb", "d-tlb" }, - { "Instruction-TLB" , "itlb", "i-tlb" }, - { "Branch" , "bpu" , "btb", "bpc" }, +static char *hw_cache[][MAX_ALIASES] = { + { "L1-d$", "l1-d", "l1d", "L1-data", }, + { "L1-i$", "l1-i", "l1i", "L1-instruction", }, + { "LLC", "L2" }, + { "dTLB", "d-tlb", "Data-TLB", }, + { "iTLB", "i-tlb", "Instruction-TLB", }, + { "branch", "branches", "bpu", "btb", "bpc", }, }; -static char *hw_cache_op [][MAX_ALIASES] = { - { "Load" , "read" }, - { "Store" , "write" }, - { "Prefetch" , "speculative-read", "speculative-load" }, +static char *hw_cache_op[][MAX_ALIASES] = { + { "load", "loads", "read", }, + { "store", "stores", "write", }, + { "prefetch", "prefetches", "speculative-read", "speculative-load", }, }; -static char *hw_cache_result [][MAX_ALIASES] = { - { "Reference" , "ops", "access" }, - { "Miss" }, +static char *hw_cache_result[][MAX_ALIASES] = { + { "refs", "Reference", "ops", "access", }, + { "misses", "miss", }, }; +#define C(x) PERF_COUNT_HW_CACHE_##x +#define CACHE_READ (1 << C(OP_READ)) +#define CACHE_WRITE (1 << C(OP_WRITE)) +#define CACHE_PREFETCH (1 << C(OP_PREFETCH)) +#define COP(x) (1 << x) + +/* + * cache operartion stat + * L1I : Read and prefetch only + * ITLB and BPU : Read-only + */ +static unsigned long hw_cache_stat[C(MAX)] = { + [C(L1D)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH), + [C(L1I)] = (CACHE_READ | CACHE_PREFETCH), + [C(LL)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH), + [C(DTLB)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH), + [C(ITLB)] = (CACHE_READ), + [C(BPU)] = (CACHE_READ), +}; + +static int is_cache_op_valid(u8 cache_type, u8 cache_op) +{ + if (hw_cache_stat[cache_type] & COP(cache_op)) + return 1; /* valid */ + else + return 0; /* invalid */ +} + +static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result) +{ + static char name[50]; + + if (cache_result) { + sprintf(name, "%s-%s-%s", hw_cache[cache_type][0], + hw_cache_op[cache_op][0], + hw_cache_result[cache_result][0]); + } else { + sprintf(name, "%s-%s", hw_cache[cache_type][0], + hw_cache_op[cache_op][1]); + } + + return name; +} + char *event_name(int counter) { u64 config = attrs[counter].config; @@ -113,7 +153,6 @@ char *event_name(int counter) case PERF_TYPE_HW_CACHE: { u8 cache_type, cache_op, cache_result; - static char name[100]; cache_type = (config >> 0) & 0xff; if (cache_type > PERF_COUNT_HW_CACHE_MAX) @@ -127,12 +166,10 @@ char *event_name(int counter) if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX) return "unknown-ext-hardware-cache-result"; - sprintf(name, "%s-Cache-%s-%ses", - hw_cache[cache_type][0], - hw_cache_op[cache_op][0], - hw_cache_result[cache_result][0]); + if (!is_cache_op_valid(cache_type, cache_op)) + return "invalid-cache"; - return name; + return event_cache_name(cache_type, cache_op, cache_result); } case PERF_TYPE_SOFTWARE: @@ -163,7 +200,8 @@ static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size) return -1; } -static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr) +static int +parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr) { int cache_type = -1, cache_op = 0, cache_result = 0; @@ -182,6 +220,9 @@ static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *a if (cache_op == -1) cache_op = PERF_COUNT_HW_CACHE_OP_READ; + if (!is_cache_op_valid(cache_type, cache_op)) + return -EINVAL; + cache_result = parse_aliases(str, hw_cache_result, PERF_COUNT_HW_CACHE_RESULT_MAX); /* @@ -196,6 +237,19 @@ static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *a return 0; } +static int check_events(const char *str, unsigned int i) +{ + if (!strncmp(str, event_symbols[i].symbol, + strlen(event_symbols[i].symbol))) + return 1; + + if (strlen(event_symbols[i].alias)) + if (!strncmp(str, event_symbols[i].alias, + strlen(event_symbols[i].alias))) + return 1; + return 0; +} + /* * Each event can have multiple symbolic names. * Symbolic names are (almost) exactly matched. @@ -235,9 +289,7 @@ static int parse_event_symbols(const char *str, struct perf_counter_attr *attr) } for (i = 0; i < ARRAY_SIZE(event_symbols); i++) { - if (!strncmp(str, event_symbols[i].symbol, - strlen(event_symbols[i].symbol))) { - + if (check_events(str, i)) { attr->type = event_symbols[i].type; attr->config = event_symbols[i].config; @@ -289,6 +341,7 @@ void print_events(void) { struct event_symbol *syms = event_symbols; unsigned int i, type, prev_type = -1; + char name[40]; fprintf(stderr, "\n"); fprintf(stderr, "List of pre-defined events (to be used in -e):\n"); @@ -301,14 +354,18 @@ void print_events(void) if (type != prev_type) fprintf(stderr, "\n"); - fprintf(stderr, " %-30s [%s]\n", syms->symbol, + if (strlen(syms->alias)) + sprintf(name, "%s OR %s", syms->symbol, syms->alias); + else + strcpy(name, syms->symbol); + fprintf(stderr, " %-40s [%s]\n", name, event_type_descriptors[type]); prev_type = type; } fprintf(stderr, "\n"); - fprintf(stderr, " %-30s [raw hardware event descriptor]\n", + fprintf(stderr, " %-40s [raw hardware event descriptor]\n", "rNNN"); fprintf(stderr, "\n"); diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c index b2f5e854f40..a3935343091 100644 --- a/tools/perf/util/run-command.c +++ b/tools/perf/util/run-command.c @@ -65,7 +65,6 @@ int start_command(struct child_process *cmd) cmd->err = fderr[0]; } -#ifndef __MINGW32__ fflush(NULL); cmd->pid = fork(); if (!cmd->pid) { @@ -118,71 +117,6 @@ int start_command(struct child_process *cmd) } exit(127); } -#else - int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */ - const char **sargv = cmd->argv; - char **env = environ; - - if (cmd->no_stdin) { - s0 = dup(0); - dup_devnull(0); - } else if (need_in) { - s0 = dup(0); - dup2(fdin[0], 0); - } else if (cmd->in) { - s0 = dup(0); - dup2(cmd->in, 0); - } - - if (cmd->no_stderr) { - s2 = dup(2); - dup_devnull(2); - } else if (need_err) { - s2 = dup(2); - dup2(fderr[1], 2); - } - - if (cmd->no_stdout) { - s1 = dup(1); - dup_devnull(1); - } else if (cmd->stdout_to_stderr) { - s1 = dup(1); - dup2(2, 1); - } else if (need_out) { - s1 = dup(1); - dup2(fdout[1], 1); - } else if (cmd->out > 1) { - s1 = dup(1); - dup2(cmd->out, 1); - } - - if (cmd->dir) - die("chdir in start_command() not implemented"); - if (cmd->env) { - env = copy_environ(); - for (; *cmd->env; cmd->env++) - env = env_setenv(env, *cmd->env); - } - - if (cmd->perf_cmd) { - cmd->argv = prepare_perf_cmd(cmd->argv); - } - - cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env); - - if (cmd->env) - free_environ(env); - if (cmd->perf_cmd) - free(cmd->argv); - - cmd->argv = sargv; - if (s0 >= 0) - dup2(s0, 0), close(s0); - if (s1 >= 0) - dup2(s1, 1), close(s1); - if (s2 >= 0) - dup2(s2, 2), close(s2); -#endif if (cmd->pid < 0) { int err = errno; @@ -288,14 +222,6 @@ int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const return run_command(&cmd); } -#ifdef __MINGW32__ -static __stdcall unsigned run_thread(void *data) -{ - struct async *async = data; - return async->proc(async->fd_for_proc, async->data); -} -#endif - int start_async(struct async *async) { int pipe_out[2]; @@ -304,7 +230,6 @@ int start_async(struct async *async) return error("cannot create pipe: %s", strerror(errno)); async->out = pipe_out[0]; -#ifndef __MINGW32__ /* Flush stdio before fork() to avoid cloning buffers */ fflush(NULL); @@ -319,33 +244,17 @@ int start_async(struct async *async) exit(!!async->proc(pipe_out[1], async->data)); } close(pipe_out[1]); -#else - async->fd_for_proc = pipe_out[1]; - async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL); - if (!async->tid) { - error("cannot create thread: %s", strerror(errno)); - close_pair(pipe_out); - return -1; - } -#endif + return 0; } int finish_async(struct async *async) { -#ifndef __MINGW32__ int ret = 0; if (wait_or_whine(async->pid)) ret = error("waitpid (async) failed"); -#else - DWORD ret = 0; - if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0) - ret = error("waiting for thread failed: %lu", GetLastError()); - else if (!GetExitCodeThread(async->tid, &ret)) - ret = error("cannot get thread exit code: %lu", GetLastError()); - CloseHandle(async->tid); -#endif + return ret; } diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h index 328289f2366..cc1837deba8 100644 --- a/tools/perf/util/run-command.h +++ b/tools/perf/util/run-command.h @@ -79,12 +79,7 @@ struct async { int (*proc)(int fd, void *data); void *data; int out; /* caller reads from here and closes it */ -#ifndef __MINGW32__ pid_t pid; -#else - HANDLE tid; - int fd_for_proc; -#endif }; int start_async(struct async *async); diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c index eaba0930680..464e7ca898c 100644 --- a/tools/perf/util/strbuf.c +++ b/tools/perf/util/strbuf.c @@ -259,7 +259,7 @@ size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *f) res = fread(sb->buf + sb->len, 1, size, f); if (res > 0) strbuf_setlen(sb, sb->len + res); - else if (res < 0 && oldalloc == 0) + else if (oldalloc == 0) strbuf_release(sb); return res; } diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h index 37b03255b42..3dca2f654cd 100644 --- a/tools/perf/util/string.h +++ b/tools/perf/util/string.h @@ -1,7 +1,7 @@ #ifndef _PERF_STRING_H_ #define _PERF_STRING_H_ -#include "../types.h" +#include "types.h" int hex2u64(const char *ptr, u64 *val); diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c new file mode 100644 index 00000000000..025a78edfff --- /dev/null +++ b/tools/perf/util/strlist.c @@ -0,0 +1,184 @@ +/* + * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com> + * + * Licensed under the GPLv2. + */ + +#include "strlist.h" +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +static struct str_node *str_node__new(const char *s, bool dupstr) +{ + struct str_node *self = malloc(sizeof(*self)); + + if (self != NULL) { + if (dupstr) { + s = strdup(s); + if (s == NULL) + goto out_delete; + } + self->s = s; + } + + return self; + +out_delete: + free(self); + return NULL; +} + +static void str_node__delete(struct str_node *self, bool dupstr) +{ + if (dupstr) + free((void *)self->s); + free(self); +} + +int strlist__add(struct strlist *self, const char *new_entry) +{ + struct rb_node **p = &self->entries.rb_node; + struct rb_node *parent = NULL; + struct str_node *sn; + + while (*p != NULL) { + int rc; + + parent = *p; + sn = rb_entry(parent, struct str_node, rb_node); + rc = strcmp(sn->s, new_entry); + + if (rc > 0) + p = &(*p)->rb_left; + else if (rc < 0) + p = &(*p)->rb_right; + else + return -EEXIST; + } + + sn = str_node__new(new_entry, self->dupstr); + if (sn == NULL) + return -ENOMEM; + + rb_link_node(&sn->rb_node, parent, p); + rb_insert_color(&sn->rb_node, &self->entries); + + return 0; +} + +int strlist__load(struct strlist *self, const char *filename) +{ + char entry[1024]; + int err; + FILE *fp = fopen(filename, "r"); + + if (fp == NULL) + return errno; + + while (fgets(entry, sizeof(entry), fp) != NULL) { + const size_t len = strlen(entry); + + if (len == 0) + continue; + entry[len - 1] = '\0'; + + err = strlist__add(self, entry); + if (err != 0) + goto out; + } + + err = 0; +out: + fclose(fp); + return err; +} + +void strlist__remove(struct strlist *self, struct str_node *sn) +{ + rb_erase(&sn->rb_node, &self->entries); + str_node__delete(sn, self->dupstr); +} + +bool strlist__has_entry(struct strlist *self, const char *entry) +{ + struct rb_node **p = &self->entries.rb_node; + struct rb_node *parent = NULL; + + while (*p != NULL) { + struct str_node *sn; + int rc; + + parent = *p; + sn = rb_entry(parent, struct str_node, rb_node); + rc = strcmp(sn->s, entry); + + if (rc > 0) + p = &(*p)->rb_left; + else if (rc < 0) + p = &(*p)->rb_right; + else + return true; + } + + return false; +} + +static int strlist__parse_list_entry(struct strlist *self, const char *s) +{ + if (strncmp(s, "file://", 7) == 0) + return strlist__load(self, s + 7); + + return strlist__add(self, s); +} + +int strlist__parse_list(struct strlist *self, const char *s) +{ + char *sep; + int err; + + while ((sep = strchr(s, ',')) != NULL) { + *sep = '\0'; + err = strlist__parse_list_entry(self, s); + *sep = ','; + if (err != 0) + return err; + s = sep + 1; + } + + return *s ? strlist__parse_list_entry(self, s) : 0; +} + +struct strlist *strlist__new(bool dupstr, const char *slist) +{ + struct strlist *self = malloc(sizeof(*self)); + + if (self != NULL) { + self->entries = RB_ROOT; + self->dupstr = dupstr; + if (slist && strlist__parse_list(self, slist) != 0) + goto out_error; + } + + return self; +out_error: + free(self); + return NULL; +} + +void strlist__delete(struct strlist *self) +{ + if (self != NULL) { + struct str_node *pos; + struct rb_node *next = rb_first(&self->entries); + + while (next) { + pos = rb_entry(next, struct str_node, rb_node); + next = rb_next(&pos->rb_node); + strlist__remove(self, pos); + } + self->entries = RB_ROOT; + free(self); + } +} diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h new file mode 100644 index 00000000000..2fb117fb4b6 --- /dev/null +++ b/tools/perf/util/strlist.h @@ -0,0 +1,32 @@ +#ifndef STRLIST_H_ +#define STRLIST_H_ + +#include "rbtree.h" +#include <stdbool.h> + +struct str_node { + struct rb_node rb_node; + const char *s; +}; + +struct strlist { + struct rb_root entries; + bool dupstr; +}; + +struct strlist *strlist__new(bool dupstr, const char *slist); +void strlist__delete(struct strlist *self); + +void strlist__remove(struct strlist *self, struct str_node *sn); +int strlist__load(struct strlist *self, const char *filename); +int strlist__add(struct strlist *self, const char *str); + +bool strlist__has_entry(struct strlist *self, const char *entry); + +static inline bool strlist__empty(const struct strlist *self) +{ + return rb_first(&self->entries) == NULL; +} + +int strlist__parse_list(struct strlist *self, const char *s); +#endif /* STRLIST_H_ */ diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 86e14375e74..78c2efde01b 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -520,7 +520,9 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, nr_syms = shdr.sh_size / shdr.sh_entsize; memset(&sym, 0, sizeof(sym)); - + self->prelinked = elf_section_by_name(elf, &ehdr, &shdr, + ".gnu.prelink_undo", + NULL) != NULL; elf_symtab__for_each_symbol(syms, nr_syms, index, sym) { struct symbol *f; u64 obj_start; @@ -535,7 +537,13 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, gelf_getshdr(sec, &shdr); obj_start = sym.st_value; - sym.st_value -= shdr.sh_addr - shdr.sh_offset; + if (self->prelinked) { + if (verbose >= 2) + printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n", + (u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset); + + sym.st_value -= shdr.sh_addr - shdr.sh_offset; + } f = symbol__new(sym.st_value, sym.st_size, elf_sym__name(&sym, symstrs), @@ -569,6 +577,8 @@ int dso__load(struct dso *self, symbol_filter_t filter, int verbose) if (!name) return -1; + self->prelinked = 0; + if (strncmp(self->name, "/tmp/perf-", 10) == 0) return dso__load_perf_map(self, filter, verbose); @@ -629,7 +639,7 @@ int dso__load_kernel(struct dso *self, const char *vmlinux, if (vmlinux) err = dso__load_vmlinux(self, vmlinux, filter, verbose); - if (err) + if (err < 0) err = dso__load_kallsyms(self, filter, verbose); return err; diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index ea332e56e45..2c48ace8203 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -2,7 +2,7 @@ #define _PERF_SYMBOL_ 1 #include <linux/types.h> -#include "../types.h" +#include "types.h" #include "list.h" #include "rbtree.h" @@ -20,8 +20,9 @@ struct symbol { struct dso { struct list_head node; struct rb_root syms; - unsigned int sym_priv_size; struct symbol *(*find_symbol)(struct dso *, u64 ip); + unsigned int sym_priv_size; + unsigned char prelinked; char name[0]; }; diff --git a/tools/perf/types.h b/tools/perf/util/types.h index 5e75f900594..5e75f900594 100644 --- a/tools/perf/types.h +++ b/tools/perf/util/types.h diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h index b8cfed776d8..b4be6071c10 100644 --- a/tools/perf/util/util.h +++ b/tools/perf/util/util.h @@ -67,7 +67,6 @@ #include <assert.h> #include <regex.h> #include <utime.h> -#ifndef __MINGW32__ #include <sys/wait.h> #include <sys/poll.h> #include <sys/socket.h> @@ -81,20 +80,6 @@ #include <netdb.h> #include <pwd.h> #include <inttypes.h> -#if defined(__CYGWIN__) -#undef _XOPEN_SOURCE -#include <grp.h> -#define _XOPEN_SOURCE 600 -#include "compat/cygwin.h" -#else -#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */ -#include <grp.h> -#define _ALL_SOURCE 1 -#endif -#else /* __MINGW32__ */ -/* pull in Windows compatibility stuff */ -#include "compat/mingw.h" -#endif /* __MINGW32__ */ #ifndef NO_ICONV #include <iconv.h> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 764554350ed..2884baf1d5f 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -746,6 +746,7 @@ static bool make_all_cpus_request(struct kvm *kvm, unsigned int req) cpumask_clear(cpus); me = get_cpu(); + spin_lock(&kvm->requests_lock); for (i = 0; i < KVM_MAX_VCPUS; ++i) { vcpu = kvm->vcpus[i]; if (!vcpu) @@ -762,6 +763,7 @@ static bool make_all_cpus_request(struct kvm *kvm, unsigned int req) smp_call_function_many(cpus, ack_flush, NULL, 1); else called = false; + spin_unlock(&kvm->requests_lock); put_cpu(); free_cpumask_var(cpus); return called; @@ -982,6 +984,7 @@ static struct kvm *kvm_create_vm(void) kvm->mm = current->mm; atomic_inc(&kvm->mm->mm_count); spin_lock_init(&kvm->mmu_lock); + spin_lock_init(&kvm->requests_lock); kvm_io_bus_init(&kvm->pio_bus); mutex_init(&kvm->lock); kvm_io_bus_init(&kvm->mmio_bus); @@ -1194,6 +1197,8 @@ int __kvm_set_memory_region(struct kvm *kvm, if (!new.dirty_bitmap) goto out_free; memset(new.dirty_bitmap, 0, dirty_bytes); + if (old.npages) + kvm_arch_flush_shadow(kvm); } #endif /* not defined CONFIG_S390 */ |