diff options
| -rw-r--r-- | arch/mips/configs/osprey_defconfig | 618 | ||||
| -rw-r--r-- | arch/mips/vr4181/common/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/vr4181/common/int_handler.S | 206 | ||||
| -rw-r--r-- | arch/mips/vr4181/common/irq.c | 239 | ||||
| -rw-r--r-- | arch/mips/vr4181/common/serial.c | 51 | ||||
| -rw-r--r-- | arch/mips/vr4181/common/time.c | 145 | ||||
| -rw-r--r-- | arch/mips/vr4181/osprey/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/vr4181/osprey/dbg_io.c | 136 | ||||
| -rw-r--r-- | arch/mips/vr4181/osprey/prom.c | 49 | ||||
| -rw-r--r-- | arch/mips/vr4181/osprey/reset.c | 40 | ||||
| -rw-r--r-- | arch/mips/vr4181/osprey/setup.c | 68 | ||||
| -rw-r--r-- | include/asm-mips/vr4181/irq.h | 122 | ||||
| -rw-r--r-- | include/asm-mips/vr4181/vr4181.h | 413 |
13 files changed, 0 insertions, 2101 deletions
diff --git a/arch/mips/configs/osprey_defconfig b/arch/mips/configs/osprey_defconfig deleted file mode 100644 index 989cb9e7ae8..00000000000 --- a/arch/mips/configs/osprey_defconfig +++ /dev/null @@ -1,618 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc2 -# Wed Jan 26 02:49:08 2005 -# -CONFIG_MIPS=y -# CONFIG_MIPS64 is not set -# CONFIG_64BIT is not set -CONFIG_MIPS32=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Machine selection -# -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_DDB5074 is not set -# CONFIG_DDB5476 is not set -# CONFIG_DDB5477 is not set -CONFIG_NEC_OSPREY=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SOC_AU1X00 is not set -# CONFIG_SIBYTE_SB1xxx_SOC is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_VR4181=y - -# -# CPU selection -# -# CONFIG_CPU_MIPS32 is not set -# CONFIG_CPU_MIPS64 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_CPU_ADVANCED is not set -CONFIG_CPU_HAS_SYNC=y -# CONFIG_PREEMPT is not set - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PC-card bridges -# - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0" - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC32 is not set -CONFIG_LIBCRC32C=m -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/vr4181/common/Makefile b/arch/mips/vr4181/common/Makefile deleted file mode 100644 index f7587ca64ea..00000000000 --- a/arch/mips/vr4181/common/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code of NEC vr4181 based boards -# - -obj-y := irq.o int_handler.o serial.o time.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/vr4181/common/int_handler.S b/arch/mips/vr4181/common/int_handler.S deleted file mode 100644 index 2c041b8ee52..00000000000 --- a/arch/mips/vr4181/common/int_handler.S +++ /dev/null @@ -1,206 +0,0 @@ -/* - * arch/mips/vr4181/common/int_handler.S - * - * Adapted to the VR4181 and almost entirely rewritten: - * Copyright (C) 1999 Bradley D. LaRonde and Michael Klar - * - * Clean up to conform to the new IRQ - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <asm/asm.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/stackframe.h> - -#include <asm/vr4181/vr4181.h> - -/* - * [jsun] - * See include/asm/vr4181/irq.h for IRQ assignment and strategy. - */ - - .text - .set noreorder - - .align 5 - NESTED(vr4181_handle_irq, PT_SIZE, ra) - - .set noat - SAVE_ALL - CLI - - .set at - .set noreorder - - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - /* we check IP3 first; it happens most frequently */ - andi t1, t0, STATUSF_IP3 - bnez t1, ll_cpu_ip3 - andi t1, t0, STATUSF_IP2 - bnez t1, ll_cpu_ip2 - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - andi t1, t0, STATUSF_IP4 - bnez t1, ll_cpu_ip4 - andi t1, t0, STATUSF_IP5 - bnez t1, ll_cpu_ip5 - andi t1, t0, STATUSF_IP6 - bnez t1, ll_cpu_ip6 - andi t1, t0, STATUSF_IP0 /* software int 0 */ - bnez t1, ll_cpu_ip0 - andi t1, t0, STATUSF_IP1 /* software int 1 */ - bnez t1, ll_cpu_ip1 - nop - - .set reorder -do_spurious: - j spurious_interrupt - -/* - * regular CPU irqs - */ -ll_cputimer_irq: - li a0, VR4181_IRQ_TIMER - move a1, sp - jal do_IRQ - j ret_from_irq - - -ll_cpu_ip0: - li a0, VR4181_IRQ_SW1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip1: - li a0, VR4181_IRQ_SW2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip3: - li a0, VR4181_IRQ_INT1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip4: - li a0, VR4181_IRQ_INT2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip5: - li a0, VR4181_IRQ_INT3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip6: - li a0, VR4181_IRQ_INT4 - move a1, sp - jal do_IRQ - j ret_from_irq - -/* - * One of the sys irq has happend. - * - * In the interest of speed, we first determine in the following order - * which 16-irq block have pending interrupts: - * sysint1 (16 sources, including cascading intrs from GPIO) - * sysint2 - * gpio (16 intr sources) - * - * Then we do binary search to find the exact interrupt source. - */ -ll_cpu_ip2: - - lui t3,%hi(VR4181_SYSINT1REG) - lhu t0,%lo(VR4181_SYSINT1REG)(t3) - lhu t2,%lo(VR4181_MSYSINT1REG)(t3) - and t0, 0xfffb /* hack - remove RTC Long 1 intr */ - and t0, t2 - beqz t0, check_sysint2 - - /* check for GPIO interrupts */ - andi t1, t0, 0x0100 - bnez t1, check_gpio_int - - /* so we have an interrupt in sysint1 which is not gpio int */ - li a0, VR4181_SYS_IRQ_BASE - 1 - j check_16 - -check_sysint2: - - lhu t0,%lo(VR4181_SYSINT2REG)(t3) - lhu t2,%lo(VR4181_MSYSINT2REG)(t3) - and t0, 0xfffe /* hack - remove RTC Long 2 intr */ - and t0, t2 - li a0, VR4181_SYS_IRQ_BASE + 16 - 1 - j check_16 - -check_gpio_int: - lui t3,%hi(VR4181_GPINTMSK) - lhu t0,%lo(VR4181_GPINTMSK)(t3) - lhu t2,%lo(VR4181_GPINTSTAT)(t3) - xori t0, 0xffff /* why? reverse logic? */ - and t0, t2 - li a0, VR4181_GPIO_IRQ_BASE - 1 - j check_16 - -/* - * When we reach check_16, we have 16-bit status in t0 and base irq number - * in a0. - */ -check_16: - andi t1, t0, 0xff - bnez t1, check_8 - - srl t0, 8 - addi a0, 8 - j check_8 - -/* - * When we reach check_8, we have 8-bit status in t0 and base irq number - * in a0. - */ -check_8: - andi t1, t0, 0xf - bnez t1, check_4 - - srl t0, 4 - addi a0, 4 - j check_4 - -/* - * When we reach check_4, we have 4-bit status in t0 and base irq number - * in a0. - */ -check_4: - andi t0, t0, 0xf - beqz t0, do_spurious - -loop: - andi t2, t0, 0x1 - srl t0, 1 - addi a0, 1 - beqz t2, loop - -found_it: - move a1, sp - jal do_IRQ - - j ret_from_irq - - END(vr4181_handle_irq) diff --git a/arch/mips/vr4181/common/irq.c b/arch/mips/vr4181/common/irq.c deleted file mode 100644 index 2cdf77c5cb3..00000000000 --- a/arch/mips/vr4181/common/irq.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * linux/arch/mips/vr4181/common/irq.c - * Completely re-written to use the new irq.c - * - * Credits to Bradley D. LaRonde and Michael Klar for writing the original - * irq.c file which was derived from the common irq.c file. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/random.h> - -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/gdb-stub.h> - -#include <asm/vr4181/vr4181.h> - -/* - * Strategy: - * - * We essentially have three irq controllers, CPU, system, and gpio. - * - * CPU irq controller is taken care by arch/mips/kernel/irq_cpu.c and - * CONFIG_IRQ_CPU config option. - * - * We here provide sys_irq and gpio_irq controller code. - */ - -static int sys_irq_base; -static int gpio_irq_base; - -/* ---------------------- sys irq ------------------------ */ -static void -sys_irq_enable(unsigned int irq) -{ - irq -= sys_irq_base; - if (irq < 16) { - *VR4181_MSYSINT1REG |= (u16)(1 << irq); - } else { - irq -= 16; - *VR4181_MSYSINT2REG |= (u16)(1 << irq); - } -} - -static void -sys_irq_disable(unsigned int irq) -{ - irq -= sys_irq_base; - if (irq < 16) { - *VR4181_MSYSINT1REG &= ~((u16)(1 << irq)); - } else { - irq -= 16; - *VR4181_MSYSINT2REG &= ~((u16)(1 << irq)); - } - -} - -static unsigned int -sys_irq_startup(unsigned int irq) -{ - sys_irq_enable(irq); - return 0; -} - -#define sys_irq_shutdown sys_irq_disable -#define sys_irq_ack sys_irq_disable - -static void -sys_irq_end(unsigned int irq) -{ - if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - sys_irq_enable(irq); -} - -static hw_irq_controller sys_irq_controller = { - "vr4181_sys_irq", - sys_irq_startup, - sys_irq_shutdown, - sys_irq_enable, - sys_irq_disable, - sys_irq_ack, - sys_irq_end, - NULL /* no affinity stuff for UP */ -}; - -/* ---------------------- gpio irq ------------------------ */ -/* gpio irq lines use reverse logic */ -static void -gpio_irq_enable(unsigned int irq) -{ - irq -= gpio_irq_base; - *VR4181_GPINTMSK &= ~((u16)(1 << irq)); -} - -static void -gpio_irq_disable(unsigned int irq) -{ - irq -= gpio_irq_base; - *VR4181_GPINTMSK |= (u16)(1 << irq); -} - -static unsigned int -gpio_irq_startup(unsigned int irq) -{ - gpio_irq_enable(irq); - - irq -= gpio_irq_base; - *VR4181_GPINTEN |= (u16)(1 << irq ); - - return 0; -} - -static void -gpio_irq_shutdown(unsigned int irq) -{ - gpio_irq_disable(irq); - - irq -= gpio_irq_base; - *VR4181_GPINTEN &= ~((u16)(1 << irq )); -} - -static void -gpio_irq_ack(unsigned int irq) -{ - u16 irqtype; - u16 irqshift; - - gpio_irq_disable(irq); - - /* we clear interrupt if it is edge triggered */ - irq -= gpio_irq_base; - if (irq < 8) { - irqtype = *VR4181_GPINTTYPL; - irqshift = 2 << (irq*2); - } else { - irqtype = *VR4181_GPINTTYPH; - irqshift = 2 << ((irq-8)*2); - } - if ( ! (irqtype & irqshift) ) { - *VR4181_GPINTSTAT = (u16) (1 << irq); - } -} - -static void -gpio_irq_end(unsigned int irq) -{ - if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - gpio_irq_enable(irq); -} - -static hw_irq_controller gpio_irq_controller = { - "vr4181_gpio_irq", - gpio_irq_startup, - gpio_irq_shutdown, - gpio_irq_enable, - gpio_irq_disable, - gpio_irq_ack, - gpio_irq_end, - NULL /* no affinity stuff for UP */ -}; - -/* --------------------- IRQ init stuff ---------------------- */ - -extern asmlinkage void vr4181_handle_irq(void); -extern void breakpoint(void); -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); -extern void mips_cpu_irq_init(u32 irq_base); - -static struct irqaction cascade = - { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL }; -static struct irqaction reserved = - { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL }; - -void __init arch_init_irq(void) -{ - int i; - - set_except_vector(0, vr4181_handle_irq); - - /* init CPU irqs */ - mips_cpu_irq_init(VR4181_CPU_IRQ_BASE); - - /* init sys irqs */ - sys_irq_base = VR4181_SYS_IRQ_BASE; - for (i=sys_irq_base; i < sys_irq_base + VR4181_NUM_SYS_IRQ; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &sys_irq_controller; - } - - /* init gpio irqs */ - gpio_irq_base = VR4181_GPIO_IRQ_BASE; - for (i=gpio_irq_base; i < gpio_irq_base + VR4181_NUM_GPIO_IRQ; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &gpio_irq_controller; - } - - /* Default all ICU IRQs to off ... */ - *VR4181_MSYSINT1REG = 0; - *VR4181_MSYSINT2REG = 0; - - /* We initialize the level 2 ICU registers to all bits disabled. */ - *VR4181_MPIUINTREG = 0; - *VR4181_MAIUINTREG = 0; - *VR4181_MKIUINTREG = 0; - - /* disable all GPIO intrs */ - *VR4181_GPINTMSK = 0xffff; - - /* vector handler. What these do is register the IRQ as non-sharable */ - setup_irq(VR4181_IRQ_INT0, &cascade); - setup_irq(VR4181_IRQ_GIU, &cascade); - - /* - * RTC interrupts are interesting. They have two destinations. - * One is at sys irq controller, and the other is at CPU IP3 and IP4. - * RTC timer is used as system timer. - * We enable them here, but timer routine will register later - * with CPU IP3/IP4. - */ - setup_irq(VR4181_IRQ_RTCL1, &reserved); - setup_irq(VR4181_IRQ_RTCL2, &reserved); -} diff --git a/arch/mips/vr4181/common/serial.c b/arch/mips/vr4181/common/serial.c deleted file mode 100644 index 3f62c62b107..00000000000 --- a/arch/mips/vr4181/common/serial.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * arch/mips/vr4181/common/serial.c - * initialize serial port on vr4181. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* - * [jsun, 010925] - * You need to make sure rs_table has at least one element in - * drivers/char/serial.c file. There is no good way to do it right - * now. A workaround is to include CONFIG_SERIAL_MANY_PORTS in your - * configure file, which would gives you 64 ports and wastes 11K ram. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/serial.h> - -#include <asm/vr4181/vr4181.h> - -void __init vr4181_init_serial(void) -{ - struct serial_struct s; - - /* turn on UART clock */ - *VR4181_CMUCLKMSK |= VR4181_CMUCLKMSK_MSKSIU; - - /* clear memory */ - memset(&s, 0, sizeof(s)); - - s.line = 0; /* we set the first one */ - s.baud_base = 1152000; - s.irq = VR4181_IRQ_SIU; - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; /* STD_COM_FLAGS */ - s.iomem_base = (u8*)VR4181_SIURB; - s.iomem_reg_shift = 0; - s.io_type = SERIAL_IO_MEM; - if (early_serial_setup(&s) != 0) { - panic("vr4181_init_serial() failed!"); - } -} - diff --git a/arch/mips/vr4181/common/time.c b/arch/mips/vr4181/common/time.c deleted file mode 100644 index 17814076b6f..00000000000 --- a/arch/mips/vr4181/common/time.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * rtc and time ops for vr4181. Part of code is drived from - * linux-vr, originally written by Bradley D. LaRonde & Michael Klar. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/param.h> /* for HZ */ -#include <linux/time.h> -#include <linux/interrupt.h> - -#include <asm/system.h> -#include <asm/time.h> - -#include <asm/vr4181/vr4181.h> - -#define COUNTS_PER_JIFFY ((32768 + HZ/2) / HZ) - -/* - * RTC ops - */ - -DEFINE_SPINLOCK(rtc_lock); - -/* per VR41xx docs, bad data can be read if between 2 counts */ -static inline unsigned short -read_time_reg(volatile unsigned short *reg) -{ - unsigned short value; - do { - value = *reg; - barrier(); - } while (value != *reg); - return value; -} - -static unsigned long -vr4181_rtc_get_time(void) -{ - unsigned short regh, regm, regl; - - // why this crazy order, you ask? to guarantee that neither m - // nor l wrap before all 3 read - do { - regm = read_time_reg(VR4181_ETIMEMREG); - barrier(); - regh = read_time_reg(VR4181_ETIMEHREG); - barrier(); - regl = read_time_reg(VR4181_ETIMELREG); - } while (regm != read_time_reg(VR4181_ETIMEMREG)); - return ((regh << 17) | (regm << 1) | (regl >> 15)); -} - -static int -vr4181_rtc_set_time(unsigned long timeval) -{ - unsigned short intreg; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - intreg = *VR4181_RTCINTREG & 0x05; - barrier(); - *VR4181_ETIMELREG = timeval << 15; - *VR4181_ETIMEMREG = timeval >> 1; - *VR4181_ETIMEHREG = timeval >> 17; - barrier(); - // assume that any ints that just triggered are invalid, since the - // time value is written non-atomically in 3 separate regs - *VR4181_RTCINTREG = 0x05 ^ intreg; - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - - -/* - * timer interrupt routine (wrapper) - * - * we need our own interrupt routine because we need to clear - * RTC1 interrupt. - */ -static void -vr4181_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - /* Clear the interrupt. */ - *VR4181_RTCINTREG = 0x2; - - /* call the generic one */ - timer_interrupt(irq, dev_id, regs); -} - - -/* - * vr4181_time_init: - * - * We pick the following choices: - * . we use elapsed timer as the RTC. We set some reasonable init data since - * it does not persist across reset - * . we use RTC1 as the system timer interrupt source. - * . we use CPU counter for fast_gettimeoffset and we calivrate the cpu - * frequency. In other words, we use calibrate_div64_gettimeoffset(). - * . we use our own timer interrupt routine which clears the interrupt - * and then calls the generic high-level timer interrupt routine. - * - */ - -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); - -static void -vr4181_timer_setup(struct irqaction *irq) -{ - /* over-write the handler to be our own one */ - irq->handler = vr4181_timer_interrupt; - - /* sets up the frequency */ - *VR4181_RTCL1LREG = COUNTS_PER_JIFFY; - *VR4181_RTCL1HREG = 0; - - /* and ack any pending ints */ - *VR4181_RTCINTREG = 0x2; - - /* setup irqaction */ - setup_irq(VR4181_IRQ_INT1, irq); - -} - -void -vr4181_init_time(void) -{ - /* setup hookup functions */ - rtc_get_time = vr4181_rtc_get_time; - rtc_set_time = vr4181_rtc_set_time; - - board_timer_setup = vr4181_timer_setup; -} - diff --git a/arch/mips/vr4181/osprey/Makefile b/arch/mips/vr4181/osprey/Makefile deleted file mode 100644 index 34be0579088..00000000000 --- a/arch/mips/vr4181/osprey/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code of NEC Osprey board -# - -obj-y := setup.o prom.o reset.o - -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/vr4181/osprey/dbg_io.c b/arch/mips/vr4181/osprey/dbg_io.c deleted file mode 100644 index 5e8a84072d5..00000000000 --- a/arch/mips/vr4181/osprey/dbg_io.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * kgdb io functions for osprey. We use the serial port on debug board. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* ======================= CONFIG ======================== */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE 0xb7fffff0 -#define MAX_BAUD 115200 - -/* distance in bytes between two serial registers */ -#define REG_OFFSET 1 - -/* - * 0 - kgdb does serial init - * 1 - kgdb skip serial init - */ -static int remoteDebugInitialized = 1; - -/* - * the default baud rate *if* kgdb does serial init - */ -#define BAUD_DEFAULT UART16550_BAUD_38400 - -/* ======================= END OF CONFIG ======================== */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up buad rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(BAUD_DEFAULT, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(BAUD_DEFAULT, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/vr4181/osprey/prom.c b/arch/mips/vr4181/osprey/prom.c deleted file mode 100644 index af0d1456161..00000000000 --- a/arch/mips/vr4181/osprey/prom.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * arch/mips/vr4181/osprey/prom.c - * prom code for osprey. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <asm/bootinfo.h> -#include <asm/addrspace.h> - -const char *get_system_type(void) -{ - return "NEC_Vr41xx Osprey"; -} - -/* - * [jsun] right now we assume it is the nec debug monitor, which does - * not pass any arguments. - */ -void __init prom_init(void) -{ - // cmdline is now set in default config - // strcpy(arcs_cmdline, "ip=bootp "); - // strcat(arcs_cmdline, "ether=46,0x03fe0300,eth0 "); - // strcpy(arcs_cmdline, "ether=0,0x0300,eth0 " - // strcat(arcs_cmdline, "video=vr4181fb:xres:240,yres:320,bpp:8 "); - - mips_machgroup = MACH_GROUP_NEC_VR41XX; - mips_machtype = MACH_NEC_OSPREY; - - /* 16MB fixed */ - add_memory_region(0, 16 << 20, BOOT_MEM_RAM); -} - -unsigned long __init prom_free_prom_memory(void) -{ - return 0; -} diff --git a/arch/mips/vr4181/osprey/reset.c b/arch/mips/vr4181/osprey/reset.c deleted file mode 100644 index 036ae83d89d..00000000000 --- a/arch/mips/vr4181/osprey/reset.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 2001 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/cacheflush.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> - -void nec_osprey_restart(char *command) -{ - set_c0_status(ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void nec_osprey_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void nec_osprey_power_off(void) -{ - nec_osprey_halt(); -} diff --git a/arch/mips/vr4181/osprey/setup.c b/arch/mips/vr4181/osprey/setup.c deleted file mode 100644 index 2ff7140e7ed..00000000000 --- a/arch/mips/vr4181/osprey/setup.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/arch/mips/vr4181/setup.c - * - * VR41xx setup routines - * - * Copyright (C) 1999 Bradley D. LaRonde - * Copyright (C) 1999, 2000 Michael Klar - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <linux/ide.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <asm/reboot.h> -#include <asm/vr4181/vr4181.h> -#include <asm/io.h> - - -extern void nec_osprey_restart(char* c); -extern void nec_osprey_halt(void); -extern void nec_osprey_power_off(void); - -extern void vr4181_init_serial(void); -extern void vr4181_init_time(void); - -static void __init nec_osprey_setup(void) -{ - set_io_port_base(VR4181_PORT_BASE); - isa_slot_offset = VR4181_ISAMEM_BASE; - - vr4181_init_serial(); - vr4181_init_time(); - - _machine_restart = nec_osprey_restart; - _machine_halt = nec_osprey_halt; - _machine_power_off = nec_osprey_power_off; - - /* setup resource limit */ - ioport_resource.end = 0xffffffff; - iomem_resource.end = 0xffffffff; - - /* [jsun] hack */ - /* - printk("[jsun] hack to change external ISA control register, %x -> %x\n", - (*VR4181_XISACTL), - (*VR4181_XISACTL) | 0x2); - *VR4181_XISACTL |= 0x2; - */ - - // *VR4181_GPHIBSTH = 0x2000; - // *VR4181_GPMD0REG = 0x00c0; - // *VR4181_GPINTEN = 1<<6; - - /* [jsun] I believe this will get the interrupt type right - * for the ether port. - */ - *VR4181_GPINTTYPL = 0x3000; -} - -early_initcall(nec_osprey_setup); diff --git a/include/asm-mips/vr4181/irq.h b/include/asm-mips/vr4181/irq.h deleted file mode 100644 index 4bf0ea970ed..00000000000 --- a/include/asm-mips/vr4181/irq.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Macros for vr4181 IRQ numbers. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* - * Strategy: - * - * Vr4181 has conceptually three levels of interrupt controllers: - * 1. the CPU itself with 8 intr level. - * 2. system interrupt controller, cascaded from int0 pin in CPU, 32 intrs - * 3. GPIO interrupts : forwarding external interrupts to sys intr controller - */ - -/* decide the irq block assignment */ -#define VR4181_NUM_CPU_IRQ 8 -#define VR4181_NUM_SYS_IRQ 32 -#define VR4181_NUM_GPIO_IRQ 16 - -#define VR4181_IRQ_BASE 0 - -#define VR4181_CPU_IRQ_BASE VR4181_IRQ_BASE -#define VR4181_SYS_IRQ_BASE (VR4181_CPU_IRQ_BASE + VR4181_NUM_CPU_IRQ) -#define VR4181_GPIO_IRQ_BASE (VR4181_SYS_IRQ_BASE + VR4181_NUM_SYS_IRQ) - -/* CPU interrupts */ - -/* - IP0 - Software interrupt - IP1 - Software interrupt - IP2 - All but battery, high speed modem, and real time clock - IP3 - RTC Long1 (system timer) - IP4 - RTC Long2 - IP5 - High Speed Modem (unused on VR4181) - IP6 - Unused - IP7 - Timer interrupt from CPO_COMPARE -*/ - -#define VR4181_IRQ_SW1 (VR4181_CPU_IRQ_BASE + 0) -#define VR4181_IRQ_SW2 (VR4181_CPU_IRQ_BASE + 1) -#define VR4181_IRQ_INT0 (VR4181_CPU_IRQ_BASE + 2) -#define VR4181_IRQ_INT1 (VR4181_CPU_IRQ_BASE + 3) -#define VR4181_IRQ_INT2 (VR4181_CPU_IRQ_BASE + 4) -#define VR4181_IRQ_INT3 (VR4181_CPU_IRQ_BASE + 5) -#define VR4181_IRQ_INT4 (VR4181_CPU_IRQ_BASE + 6) -#define VR4181_IRQ_TIMER (VR4181_CPU_IRQ_BASE + 7) - - -/* Cascaded from VR4181_IRQ_INT0 (ICU mapped interrupts) */ - -/* - IP2 - same as VR4181_IRQ_INT1 - IP8 - This is a cascade to GPIO IRQ's. Do not use. - IP16 - same as VR4181_IRQ_INT2 - IP18 - CompactFlash -*/ - -#define VR4181_IRQ_BATTERY (VR4181_SYS_IRQ_BASE + 0) -#define VR4181_IRQ_POWER (VR4181_SYS_IRQ_BASE + 1) -#define VR4181_IRQ_RTCL1 (VR4181_SYS_IRQ_BASE + 2) -#define VR4181_IRQ_ETIMER (VR4181_SYS_IRQ_BASE + 3) -#define VR4181_IRQ_RFU12 (VR4181_SYS_IRQ_BASE + 4) -#define VR4181_IRQ_PIU (VR4181_SYS_IRQ_BASE + 5) -#define VR4181_IRQ_AIU (VR4181_SYS_IRQ_BASE + 6) -#define VR4181_IRQ_KIU (VR4181_SYS_IRQ_BASE + 7) -#define VR4181_IRQ_GIU (VR4181_SYS_IRQ_BASE + 8) -#define VR4181_IRQ_SIU (VR4181_SYS_IRQ_BASE + 9) -#define VR4181_IRQ_RFU18 (VR4181_SYS_IRQ_BASE + 10) -#define VR4181_IRQ_SOFT (VR4181_SYS_IRQ_BASE + 11) -#define VR4181_IRQ_RFU20 (VR4181_SYS_IRQ_BASE + 12) -#define VR4181_IRQ_DOZEPIU (VR4181_SYS_IRQ_BASE + 13) -#define VR4181_IRQ_RFU22 (VR4181_SYS_IRQ_BASE + 14) -#define VR4181_IRQ_RFU23 (VR4181_SYS_IRQ_BASE + 15) -#define VR4181_IRQ_RTCL2 (VR4181_SYS_IRQ_BASE + 16) -#define VR4181_IRQ_LED (VR4181_SYS_IRQ_BASE + 17) -#define VR4181_IRQ_ECU (VR4181_SYS_IRQ_BASE + 18) -#define VR4181_IRQ_CSU (VR4181_SYS_IRQ_BASE + 19) -#define VR4181_IRQ_USB (VR4181_SYS_IRQ_BASE + 20) -#define VR4181_IRQ_DMA (VR4181_SYS_IRQ_BASE + 21) -#define VR4181_IRQ_LCD (VR4181_SYS_IRQ_BASE + 22) -#define VR4181_IRQ_RFU31 (VR4181_SYS_IRQ_BASE + 23) -#define VR4181_IRQ_RFU32 (VR4181_SYS_IRQ_BASE + 24) -#define VR4181_IRQ_RFU33 (VR4181_SYS_IRQ_BASE + 25) -#define VR4181_IRQ_RFU34 (VR4181_SYS_IRQ_BASE + 26) -#define VR4181_IRQ_RFU35 (VR4181_SYS_IRQ_BASE + 27) -#define VR4181_IRQ_RFU36 (VR4181_SYS_IRQ_BASE + 28) -#define VR4181_IRQ_RFU37 (VR4181_SYS_IRQ_BASE + 29) -#define VR4181_IRQ_RFU38 (VR4181_SYS_IRQ_BASE + 30) -#define VR4181_IRQ_RFU39 (VR4181_SYS_IRQ_BASE + 31) - -/* Cascaded from VR4181_IRQ_GIU */ -#define VR4181_IRQ_GPIO0 (VR4181_GPIO_IRQ_BASE + 0) -#define VR4181_IRQ_GPIO1 (VR4181_GPIO_IRQ_BASE + 1) -#define VR4181_IRQ_GPIO2 (VR4181_GPIO_IRQ_BASE + 2) -#define VR4181_IRQ_GPIO3 (VR4181_GPIO_IRQ_BASE + 3) -#define VR4181_IRQ_GPIO4 (VR4181_GPIO_IRQ_BASE + 4) -#define VR4181_IRQ_GPIO5 (VR4181_GPIO_IRQ_BASE + 5) -#define VR4181_IRQ_GPIO6 (VR4181_GPIO_IRQ_BASE + 6) -#define VR4181_IRQ_GPIO7 (VR4181_GPIO_IRQ_BASE + 7) -#define VR4181_IRQ_GPIO8 (VR4181_GPIO_IRQ_BASE + 8) -#define VR4181_IRQ_GPIO9 (VR4181_GPIO_IRQ_BASE + 9) -#define VR4181_IRQ_GPIO10 (VR4181_GPIO_IRQ_BASE + 10) -#define VR4181_IRQ_GPIO11 (VR4181_GPIO_IRQ_BASE + 11) -#define VR4181_IRQ_GPIO12 (VR4181_GPIO_IRQ_BASE + 12) -#define VR4181_IRQ_GPIO13 (VR4181_GPIO_IRQ_BASE + 13) -#define VR4181_IRQ_GPIO14 (VR4181_GPIO_IRQ_BASE + 14) -#define VR4181_IRQ_GPIO15 (VR4181_GPIO_IRQ_BASE + 15) - - -// Alternative to above GPIO IRQ defines -#define VR4181_IRQ_GPIO(pin) ((VR4181_IRQ_GPIO0) + (pin)) - -#define VR4181_IRQ_MAX (VR4181_IRQ_BASE + VR4181_NUM_CPU_IRQ + \ - VR4181_NUM_SYS_IRQ + VR4181_NUM_GPIO_IRQ) diff --git a/include/asm-mips/vr4181/vr4181.h b/include/asm-mips/vr4181/vr4181.h deleted file mode 100644 index 5c5d6074151..00000000000 --- a/include/asm-mips/vr4181/vr4181.h +++ /dev/null @@ -1,413 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Michael Klar - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - */ -#ifndef __ASM_VR4181_VR4181_H -#define __ASM_VR4181_VR4181_H - -#include <asm/addrspace.h> - -#include <asm/vr4181/irq.h> - -#ifndef __ASSEMBLY__ -#define __preg8 (volatile unsigned char*) -#define __preg16 (volatile unsigned short*) -#define __preg32 (volatile unsigned int*) -#else -#define __preg8 -#define __preg16 -#define __preg32 -#endif - -// Embedded CPU peripheral registers -// Note that many of the registers have different physical address for VR4181 - -// Bus Control Unit (BCU) -#define VR4181_BCUCNTREG1 __preg16(KSEG1 + 0x0A000000) /* BCU control register 1 (R/W) */ -#define VR4181_CMUCLKMSK __preg16(KSEG1 + 0x0A000004) /* Clock mask register (R/W) */ -#define VR4181_CMUCLKMSK_MSKCSUPCLK 0x0040 -#define VR4181_CMUCLKMSK_MSKAIUPCLK 0x0020 -#define VR4181_CMUCLKMSK_MSKPIUPCLK 0x0010 -#define VR4181_CMUCLKMSK_MSKADUPCLK 0x0008 -#define VR4181_CMUCLKMSK_MSKSIU18M 0x0004 -#define VR4181_CMUCLKMSK_MSKADU18M 0x0002 -#define VR4181_CMUCLKMSK_MSKUSB 0x0001 -#define VR4181_CMUCLKMSK_MSKSIU VR4181_CMUCLKMSK_MSKSIU18M -#define VR4181_BCUSPEEDREG __preg16(KSEG1 + 0x0A00000C) /* BCU access time parameter (R/W) */ -#define VR4181_BCURFCNTREG __preg16(KSEG1 + 0x0A000010) /* BCU refresh control register (R/W) */ -#define VR4181_REVIDREG __preg16(KSEG1 + 0x0A000014) /* Revision ID register (R) */ -#define VR4181_CLKSPEEDREG __preg16(KSEG1 + 0x0A000018) /* Clock speed register (R) */ -#define VR4181_EDOMCYTREG __preg16(KSEG1 + 0x0A000300) /* Memory cycle timing register (R/W) */ -#define VR4181_MEMCFG_REG __preg16(KSEG1 + 0x0A000304) /* Memory configuration register (R/W) */ -#define VR4181_MODE_REG __preg16(KSEG1 + 0x0A000308) /* SDRAM mode register (R/W) */ -#define VR4181_SDTIMINGREG __preg16(KSEG1 + 0x0A00030C) /* SDRAM timing register (R/W) */ - -// DMA Control Unit (DCU) -#define VR4181_MICDEST1REG1 __preg16(KSEG1 + 0x0A000020) /* Microphone destination 1 address register 1 (R/W) */ -#define VR4181_MICDEST1REG2 __preg16(KSEG1 + 0x0A000022) /* Microphone destination 1 address register 2 (R/W) */ -#define VR4181_MICDEST2REG1 __preg16(KSEG1 + 0x0A000024) /* Microphone destination 2 address register 1 (R/W) */ -#define VR4181_MICDEST2REG2 __preg16(KSEG1 + 0x0A000026) /* Microphone destination 2 address register 2 (R/W) */ -#define VR4181_SPKRRC1REG1 __preg16(KSEG1 + 0x0A000028) /* Speaker Source 1 address register 1 (R/W) */ -#define VR4181_SPKRRC1REG2 __preg16(KSEG1 + 0x0A00002A) /* Speaker Source 1 address register 2 (R/W) */ -#define VR4181_SPKRRC2REG1 __preg16(KSEG1 + 0x0A00002C) /* Speaker Source 2 address register 1 (R/W) */ -#define VR4181_SPKRRC2REG2 __preg16(KSEG1 + 0x0A00002E) /* Speaker Source 2 address register 2 (R/W) */ -#define VR4181_DMARSTREG __preg16(KSEG1 + 0x0A000040) /* DMA Reset register (R/W) */ -#define VR4181_AIUDMAMSKREG __preg16(KSEG1 + 0x0A000046) /* Audio DMA mask register (R/W) */ -#define VR4181_USBDMAMSKREG __preg16(KSEG1 + 0x0A000600) /* USB DMA Mask register (R/W) */ -#define VR4181_USBRXS1AREG1 __preg16(KSEG1 + 0x0A000602) /* USB Rx source 1 address register 1 (R/W) */ -#define VR4181_USBRXS1AREG2 __preg16(KSEG1 + 0x0A000604) /* USB Rx source 1 address register 2 (R/W) */ -#define VR4181_USBRXS2AREG1 __preg16(KSEG1 + 0x0A000606) /* USB Rx source 2 address register 1 (R/W) */ -#define VR4181_USBRXS2AREG2 __preg16(KSEG1 + 0x0A000608) /* USB Rx source 2 address register 2 (R/W) */ -#define VR4181_USBTXS1AREG1 __preg16(KSEG1 + 0x0A00060A) /* USB Tx source 1 address register 1 (R/W) */ -#define VR4181_USBTXS1AREG2 __preg16(KSEG1 + 0x0A00060C) /* USB Tx source 1 address register 2 (R/W) */ -#define VR4181_USBTXS2AREG1 __preg16(KSEG1 + 0x0A00060E) /* USB Tx source 2 address register 1 (R/W) */ -#define VR4181_USBTXS2AREG2 __preg16(KSEG1 + 0x0A000610) /* USB Tx source 2 address register 2 (R/W) */ -#define VR4181_USBRXD1AREG1 __preg16(KSEG1 + 0x0A00062A) /* USB Rx destination 1 address register 1 (R/W) */ -#define VR4181_USBRXD1AREG2 __preg16(KSEG1 + 0x0A00062C) /* USB Rx destination 1 address register 2 (R/W) */ -#define VR4181_USBRXD2AREG1 __preg16(KSEG1 + 0x0A00062E) /* USB Rx destination 2 address register 1 (R/W) */ -#define VR4181_USBRXD2AREG2 __preg16(KSEG1 + 0x0A000630) /* USB Rx destination 2 address register 2 (R/W) */ -#define VR4181_USBTXD1AREG1 __preg16(KSEG1 + 0x0A000632) /* USB Tx destination 1 address register 1 (R/W) */ -#define VR4181_USBTXD1AREG2 __preg16(KSEG1 + 0x0A000634) /* USB Tx destination 1 address register 2 (R/W) */ -#define VR4181_USBTXD2AREG1 __preg16(KSEG1 + 0x0A000636) /* USB Tx destination 2 address register 1 (R/W) */ -#define VR4181_USBTXD2AREG2 __preg16(KSEG1 + 0x0A000638) /* USB Tx destination 2 address register 2 (R/W) */ -#define VR4181_RxRCLENREG __preg16(KSEG1 + 0x0A000652) /* USB Rx record length register (R/W) */ -#define VR4181_TxRCLENREG __preg16(KSEG1 + 0x0A000654) /* USB Tx record length register (R/W) */ -#define VR4181_MICRCLENREG __preg16(KSEG1 + 0x0A000658) /* Microphone record length register (R/W) */ -#define VR4181_SPKRCLENREG __preg16(KSEG1 + 0x0A00065A) /* Speaker record length register (R/W) */ -#define VR4181_USBCFGREG __preg16(KSEG1 + 0x0A00065C) /* USB configuration register (R/W) */ -#define VR4181_MICDMACFGREG __preg16(KSEG1 + 0x0A00065E) /* Microphone DMA configuration register (R/W) */ -#define VR4181_SPKDMACFGREG __preg16(KSEG1 + 0x0A000660) /* Speaker DMA configuration register (R/W) */ -#define VR4181_DMAITRQREG __preg16(KSEG1 + 0x0A000662) /* DMA interrupt request register (R/W) */ -#define VR4181_DMACLTREG __preg16(KSEG1 + 0x0A000664) /* DMA control register (R/W) */ -#define VR4181_DMAITMKREG __preg16(KSEG1 + 0x0A000666) /* DMA interrupt mask register (R/W) */ - -// ISA Bridge -#define VR4181_ISABRGCTL __preg16(KSEG1 + 0x0B0002C0) /* ISA Bridge Control Register (R/W) */ -#define VR4181_ISABRGSTS __preg16(KSEG1 + 0x0B0002C2) /* ISA Bridge Status Register (R/W) */ -#define VR4181_XISACTL __preg16(KSEG1 + 0x0B0002C4) /* External ISA Control Register (R/W) */ - -// Clocked Serial Interface (CSI) -#define VR4181_CSIMODE __preg16(KSEG1 + 0x0B000900) /* CSI Mode Register (R/W) */ -#define VR4181_CSIRXDATA __preg16(KSEG1 + 0x0B000902) /* CSI Receive Data Register (R) */ -#define VR4181_CSITXDATA __preg16(KSEG1 + 0x0B000904) /* CSI Transmit Data Register (R/W) */ -#define VR4181_CSILSTAT __preg16(KSEG1 + 0x0B000906) /* CSI Line Status Register (R/W) */ -#define VR4181_CSIINTMSK __preg16(KSEG1 + 0x0B000908) /* CSI Interrupt Mask Register (R/W) */ -#define VR4181_CSIINTSTAT __preg16(KSEG1 + 0x0B00090a) /* CSI Interrupt Status Register (R/W) */ -#define VR4181_CSITXBLEN __preg16(KSEG1 + 0x0B00090c) /* CSI Transmit Burst Length Register (R/W) */ -#define VR4181_CSIRXBLEN __preg16(KSEG1 + 0x0B00090e) /* CSI Receive Burst Length Register (R/W) */ - -// Interrupt Control Unit (ICU) -#define VR4181_SYSINT1REG __preg16(KSEG1 + 0x0A000080) /* Level 1 System interrupt register 1 (R) */ -#define VR4181_MSYSINT1REG __preg16(KSEG1 + 0x0A00008C) /* Level 1 mask system interrupt register 1 (R/W) */ -#define VR4181_NMIREG __preg16(KSEG1 + 0x0A000098) /* NMI register (R/W) */ -#define VR4181_SOFTINTREG __preg16(KSEG1 + 0x0A00009A) /* Software interrupt register (R/W) */ -#define VR4181_SYSINT2REG __preg16(KSEG1 + 0x0A000200) /* Level 1 System interrupt register 2 (R) */ -#define VR4181_MSYSINT2REG __preg16(KSEG1 + 0x0A000206) /* Level 1 mask system interrupt register 2 (R/W) */ -#define VR4181_PIUINTREGro __preg16(KSEG1 + 0x0B000082) /* Level 2 PIU interrupt register (R) */ -#define VR4181_AIUINTREG __preg16(KSEG1 + 0x0B000084) /* Level 2 AIU interrupt register (R) */ -#define VR4181_MPIUINTREG __preg16(KSEG1 + 0x0B00008E) /* Level 2 mask PIU interrupt register (R/W) */ -#define VR4181_MAIUINTREG __preg16(KSEG1 + 0x0B000090) /* Level 2 mask AIU interrupt register (R/W) */ -#define VR4181_MKIUINTREG __preg16(KSEG1 + 0x0B000092) /* Level 2 mask KIU interrupt register (R/W) */ -#define VR4181_KIUINTREG __preg16(KSEG1 + 0x0B000198) /* Level 2 KIU interrupt register (R) */ - -// Power Management Unit (PMU) -#define VR4181_PMUINTREG __preg16(KSEG1 + 0x0B0000A0) /* PMU Status Register (R/W) */ -#define VR4181_PMUINT_POWERSW 0x1 /* Power switch */ -#define VR4181_PMUINT_BATT 0x2 /* Low batt during normal operation */ -#define VR4181_PMUINT_DEADMAN 0x4 /* Deadman's switch */ -#define VR4181_PMUINT_RESET 0x8 /* Reset switch */ -#define VR4181_PMUINT_RTCRESET 0x10 /* RTC Reset */ -#define VR4181_PMUINT_TIMEOUT 0x20 /* HAL Timer Reset */ -#define VR4181_PMUINT_BATTLOW 0x100 /* Battery low */ -#define VR4181_PMUINT_RTC 0x200 /* RTC Alarm */ -#define VR4181_PMUINT_DCD 0x400 /* DCD# */ -#define VR4181_PMUINT_GPIO0 0x1000 /* GPIO0 */ -#define VR4181_PMUINT_GPIO1 0x2000 /* GPIO1 */ -#define VR4181_PMUINT_GPIO2 0x4000 /* GPIO2 */ -#define VR4181_PMUINT_GPIO3 0x8000 /* GPIO3 */ - -#define VR4181_PMUCNTREG __preg16(KSEG1 + 0x0B0000A2) /* PMU Control Register (R/W) */ -#define VR4181_PMUWAITREG __preg16(KSEG1 + 0x0B0000A8) /* PMU Wait Counter Register (R/W) */ -#define VR4181_PMUDIVREG __preg16(KSEG1 + 0x0B0000AC) /* PMU Divide Mode Register (R/W) */ -#define VR4181_DRAMHIBCTL __preg16(KSEG1 + 0x0B0000B2) /* DRAM Hibernate Control Register (R/W) */ - -// Real Time Clock Unit (RTC) -#define VR4181_ETIMELREG __preg16(KSEG1 + 0x0B0000C0) /* Elapsed Time L Register (R/W) */ -#define VR4181_ETIMEMREG __preg16(KSEG1 + 0x0B0000C2) /* Elapsed Time M Register (R/W) */ -#define VR4181_ETIMEHREG __preg16(KSEG1 + 0x0B0000C4) /* Elapsed Time H Register (R/W) */ -#define VR4181_ECMPLREG __preg16(KSEG1 + 0x0B0000C8) /* Elapsed Compare L Register (R/W) */ -#define VR4181_ECMPMREG __preg16(KSEG1 + 0x0B0000CA) /* Elapsed Compare M Register (R/W) */ -#define VR4181_ECMPHREG __preg16(KSEG1 + 0x0B0000CC) /* Elapsed Compare H Register (R/W) */ -#define VR4181_RTCL1LREG __preg16(KSEG1 + 0x0B0000D0) /* RTC Long 1 L Register (R/W) */ -#define VR4181_RTCL1HREG __preg16(KSEG1 + 0x0B0000D2) /* RTC Long 1 H Register (R/W) */ -#define VR4181_RTCL1CNTLREG __preg16(KSEG1 + 0x0B0000D4) /* RTC Long 1 Count L Register (R) */ -#define VR4181_RTCL1CNTHREG __preg16(KSEG1 + 0x0B0000D6) /* RTC Long 1 Count H Register (R) */ -#define VR4181_RTCL2LREG __preg16(KSEG1 + 0x0B0000D8) /* RTC Long 2 L Register (R/W) */ -#define VR4181_RTCL2HREG __preg16(KSEG1 + 0x0B0000DA) /* RTC Long 2 H Register (R/W) */ -#define VR4181_RTCL2CNTLREG __preg16(KSEG1 + 0x0B0000DC) /* RTC Long 2 Count L Register (R) */ -#define VR4181_RTCL2CNTHREG __preg16(KSEG1 + 0x0B0000DE) /* RTC Long 2 Count H Register (R) */ -#define VR4181_RTCINTREG __preg16(KSEG1 + 0x0B0001DE) /* RTC Interrupt Register (R/W) */ - -// Deadman's Switch Unit (DSU) -#define VR4181_DSUCNTREG __preg16(KSEG1 + 0x0B0000E0) /* DSU Control Register (R/W) */ -#define VR4181_DSUSETREG __preg16(KSEG1 + 0x0B0000E2) /* DSU Dead Time Set Register (R/W) */ -#define VR4181_DSUCLRREG __preg16(KSEG1 + 0x0B0000E4) /* DSU Clear Register (W) */ -#define VR4181_DSUTIMREG __preg16(KSEG1 + 0x0B0000E6) /* DSU Elapsed Time Register (R/W) */ - -// General Purpose I/O Unit (GIU) -#define VR4181_GPMD0REG __preg16(KSEG1 + 0x0B000300) /* GPIO Mode 0 Register (R/W) */ -#define VR4181_GPMD1REG __preg16(KSEG1 + 0x0B000302) /* GPIO Mode 1 Register (R/W) */ -#define VR4181_GPMD2REG __preg16(KSEG1 + 0x0B000304) /* GPIO Mode 2 Register (R/W) */ -#define VR4181_GPMD3REG __preg16(KSEG1 + 0x0B000306) /* GPIO Mode 3 Register (R/W) */ -#define VR4181_GPDATHREG __preg16(KSEG1 + 0x0B000308) /* GPIO Data High Register (R/W) */ -#define VR4181_GPDATHREG_GPIO16 0x0001 -#define VR4181_GPDATHREG_GPIO17 0x0002 -#define VR4181_GPDATHREG_GPIO18 0x0004 -#define VR4181_GPDATHREG_GPIO19 0x0008 -#define VR4181_GPDATHREG_GPIO20 0x0010 -#define VR4181_GPDATHREG_GPIO21 0x0020 -#define VR4181_GPDATHREG_GPIO22 0x0040 -#define VR4181_GPDATHREG_GPIO23 0x0080 -#define VR4181_GPDATHREG_GPIO24 0x0100 -#define VR4181_GPDATHREG_GPIO25 0x0200 -#define VR4181_GPDATHREG_GPIO26 0x0400 -#define VR4181_GPDATHREG_GPIO27 0x0800 -#define VR4181_GPDATHREG_GPIO28 0x1000 -#define VR4181_GPDATHREG_GPIO29 0x2000 -#define VR4181_GPDATHREG_GPIO30 0x4000 -#define VR4181_GPDATHREG_GPIO31 0x8000 -#define VR4181_GPDATLREG __preg16(KSEG1 + 0x0B00030A) /* GPIO Data Low Register (R/W) */ -#define VR4181_GPDATLREG_GPIO0 0x0001 -#define VR4181_GPDATLREG_GPIO1 0x0002 -#define VR4181_GPDATLREG_GPIO2 0x0004 -#define VR4181_GPDATLREG_GPIO3 0x0008 -#define VR4181_GPDATLREG_GPIO4 0x0010 -#define VR4181_GPDATLREG_GPIO5 0x0020 -#define VR4181_GPDATLREG_GPIO6 0x0040 -#define VR4181_GPDATLREG_GPIO7 0x0080 -#define VR4181_GPDATLREG_GPIO8 0x0100 -#define VR4181_GPDATLREG_GPIO9 0x0200 -#define VR4181_GPDATLREG_GPIO10 0x0400 -#define VR4181_GPDATLREG_GPIO11 0x0800 -#define VR4181_GPDATLREG_GPIO12 0x1000 -#define VR4181_GPDATLREG_GPIO13 0x2000 -#define VR4181_GPDATLREG_GPIO14 0x4000 -#define VR4181_GPDATLREG_GPIO15 0x8000 -#define VR4181_GPINTEN __preg16(KSEG1 + 0x0B00030C) /* GPIO Interrupt Enable Register (R/W) */ -#define VR4181_GPINTMSK __preg16(KSEG1 + 0x0B00030E) /* GPIO Interrupt Mask Register (R/W) */ -#define VR4181_GPINTTYPH __preg16(KSEG1 + 0x0B000310) /* GPIO Interrupt Type High Register (R/W) */ -#define VR4181_GPINTTYPL __preg16(KSEG1 + 0x0B000312) /* GPIO Interrupt Type Low Register (R/W) */ -#define VR4181_GPINTSTAT __preg16(KSEG1 + 0x0B000314) /* GPIO Interrupt Status Register (R/W) */ -#define VR4181_GPHIBSTH __preg16(KSEG1 + 0x0B000316) /* GPIO Hibernate Pin State High Register (R/W) */ -#define VR4181_GPHIBSTL __preg16(KSEG1 + 0x0B000318) /* GPIO Hibernate Pin State Low Register (R/W) */ -#define VR4181_GPSICTL __preg16(KSEG1 + 0x0B00031A) /* GPIO Serial Interface Control Register (R/W) */ -#define VR4181_KEYEN __preg16(KSEG1 + 0x0B00031C) /* Keyboard Scan Pin Enable Register (R/W) */ -#define VR4181_PCS0STRA __preg16(KSEG1 + 0x0B000320) /* Programmable Chip Select [0] Start Address Register (R/W) */ -#define VR4181_PCS0STPA __preg16(KSEG1 + 0x0B000322) /* Programmable Chip Select [0] Stop Address Register (R/W) */ -#define VR4181_PCS0HIA __preg16(KSEG1 + 0x0B000324) /* Programmable Chip Select [0] High Address Register (R/W) */ -#define VR4181_PCS1STRA __preg16(KSEG1 + 0x0B000326) /* Programmable Chip Select [1] Start Address Register (R/W) */ -#define VR4181_PCS1STPA __preg16(KSEG1 + 0x0B000328) /* Programmable Chip Select [1] Stop Address Register (R/W) */ -#define VR4181_PCS1HIA __preg16(KSEG1 + 0x0B00032A) /* Programmable Chip Select [1] High Address Register (R/W) */ -#define VR4181_PCSMODE __preg16(KSEG1 + 0x0B00032C) /* Programmable Chip Select Mode Register (R/W) */ -#define VR4181_LCDGPMODE __preg16(KSEG1 + 0x0B00032E) /* LCD General Purpose Mode Register (R/W) */ -#define VR4181_MISCREG0 __preg16(KSEG1 + 0x0B000330) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG1 __preg16(KSEG1 + 0x0B000332) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG2 __preg16(KSEG1 + 0x0B000334) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG3 __preg16(KSEG1 + 0x0B000336) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG4 __preg16(KSEG1 + 0x0B000338) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG5 __preg16(KSEG1 + 0x0B00033A) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG6 __preg16(KSEG1 + 0x0B00033C) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG7 __preg16(KSEG1 + 0x0B00033D) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG8 __preg16(KSEG1 + 0x0B000340) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG9 __preg16(KSEG1 + 0x0B000342) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG10 __preg16(KSEG1 + 0x0B000344) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG11 __preg16(KSEG1 + 0x0B000346) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG12 __preg16(KSEG1 + 0x0B000348) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG13 __preg16(KSEG1 + 0x0B00034A) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG14 __preg16(KSEG1 + 0x0B00034C) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_MISCREG15 __preg16(KSEG1 + 0x0B00034E) /* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */ -#define VR4181_SECIRQMASKL VR4181_GPINTEN -// No SECIRQMASKH for VR4181 - -// Touch Panel Interface Unit (PIU) -#define VR4181_PIUCNTREG __preg16(KSEG1 + 0x0B000122) /* PIU Control register (R/W) */ -#define VR4181_PIUCNTREG_PIUSEQEN 0x0004 -#define VR4181_PIUCNTREG_PIUPWR 0x0002 -#define VR4181_PIUCNTREG_PADRST 0x0001 - -#define VR4181_PIUINTREG __preg16(KSEG1 + 0x0B000124) /* PIU Interrupt cause register (R/W) */ -#define VR4181_PIUINTREG_OVP 0x8000 -#define VR4181_PIUINTREG_PADCMD 0x0040 -#define VR4181_PIUINTREG_PADADP 0x0020 -#define VR4181_PIUINTREG_PADPAGE1 0x0010 -#define VR4181_PIUINTREG_PADPAGE0 0x0008 -#define VR4181_PIUINTREG_PADDLOST 0x0004 -#define VR4181_PIUINTREG_PENCHG 0x0001 - -#define VR4181_PIUSIVLREG __preg16(KSEG1 + 0x0B000126) /* PIU Data sampling interval register (R/W) */ -#define VR4181_PIUSTBLREG __preg16(KSEG1 + 0x0B000128) /* PIU A/D converter start delay register (R/W) */ -#define VR4181_PIUCMDREG __preg16(KSEG1 + 0x0B00012A) /* PIU A/D command register (R/W) */ -#define VR4181_PIUASCNREG __preg16(KSEG1 + 0x0B000130) /* PIU A/D port scan register (R/W) */ -#define VR4181_PIUAMSKREG __preg16(KSEG1 + 0x0B000132) /* PIU A/D scan mask register (R/W) */ -#define VR4181_PIUCIVLREG __preg16(KSEG1 + 0x0B00013E) /* PIU Check interval register (R) */ -#define VR4181_PIUPB00REG __preg16(KSEG1 + 0x0B0002A0) /* PIU Page 0 Buffer 0 register (R/W) */ -#define VR4181_PIUPB01REG __preg16(KSEG1 + 0x0B0002A2) /* PIU Page 0 Buffer 1 register (R/W) */ -#define VR4181_PIUPB02REG __preg16(KSEG1 + 0x0B0002A4) /* PIU Page 0 Buffer 2 register (R/W) */ -#define VR4181_PIUPB03REG __preg16(KSEG1 + 0x0B0002A6) /* PIU Page 0 Buffer 3 register (R/W) */ -#define VR4181_PIUPB10REG __preg16(KSEG1 + 0x0B0002A8) /* PIU Page 1 Buffer 0 register (R/W) */ -#define VR4181_PIUPB11REG __preg16(KSEG1 + 0x0B0002AA) /* PIU Page 1 Buffer 1 register (R/W) */ -#define VR4181_PIUPB12REG __preg16(KSEG1 + 0x0B0002AC) /* PIU Page 1 Buffer 2 register (R/W) */ -#define VR4181_PIUPB13REG __preg16(KSEG1 + 0x0B0002AE) /* PIU Page 1 Buffer 3 register (R/W) */ -#define VR4181_PIUAB0REG __preg16(KSEG1 + 0x0B0002B0) /* PIU A/D scan Buffer 0 register (R/W) */ -#define VR4181_PIUAB1REG __preg16(KSEG1 + 0x0B0002B2) /* PIU A/D scan Buffer 1 register (R/W) */ -#define VR4181_PIUAB2REG __preg16(KSEG1 + 0x0B0002B4) /* PIU A/D scan Buffer 2 register (R/W) */ -#define VR4181_PIUAB3REG __preg16(KSEG1 + 0x0B0002B6) /* PIU A/D scan Buffer 3 register (R/W) */ -#define VR4181_PIUPB04REG __preg16(KSEG1 + 0x0B0002BC) /* PIU Page 0 Buffer 4 register (R/W) */ -#define VR4181_PIUPB14REG __preg16(KSEG1 + 0x0B0002BE) /* PIU Page 1 Buffer 4 register (R/W) */ - -// Audio Interface Unit (AIU) -#define VR4181_SODATREG __preg16(KSEG1 + 0x0B000166) /* Speaker Output Data Register (R/W) */ -#define VR4181_SCNTREG __preg16(KSEG1 + 0x0B000168) /* Speaker Output Control Register (R/W) */ -#define VR4181_MIDATREG __preg16(KSEG1 + 0x0B000170) /* Mike Input Data Register (R/W) */ -#define VR4181_MCNTREG __preg16(KSEG1 + 0x0B000172) /* Mike Input Control Register (R/W) */ -#define VR4181_DVALIDREG __preg16(KSEG1 + 0x0B000178) /* Data Valid Register (R/W) */ -#define VR4181_SEQREG __preg16(KSEG1 + 0x0B00017A) /* Sequential Register (R/W) */ -#define VR4181_INTREG __preg16(KSEG1 + 0x0B00017C) /* Interrupt Register (R/W) */ -#define VR4181_SDMADATREG __preg16(KSEG1 + 0x0B000160) /* Speaker DMA Data Register (R/W) */ -#define VR4181_MDMADATREG __preg16(KSEG1 + 0x0B000162) /* Microphone DMA Data Register (R/W) */ -#define VR4181_DAVREF_SETUP __preg16(KSEG1 + 0x0B000164) /* DAC Vref setup register (R/W) */ -#define VR4181_SCNVC_END __preg16(KSEG1 + 0x0B00016E) /* Speaker sample rate control (R/W) */ -#define VR4181_MIDATREG __preg16(KSEG1 + 0x0B000170) /* Microphone Input Data Register (R/W) */ -#define VR4181_MCNTREG __preg16(KSEG1 + 0x0B000172) /* Microphone Input Control Register (R/W) */ -#define VR4181_MCNVC_END __preg16(KSEG1 + 0x0B00017E) /* Microphone sample rate control (R/W) */ - -// Keyboard Interface Unit (KIU) -#define VR4181_KIUDAT0 __preg16(KSEG1 + 0x0B000180) /* KIU Data0 Register (R/W) */ -#define VR4181_KIUDAT1 __preg16(KSEG1 + 0x0B000182) /* KIU Data1 Register (R/W) */ -#define VR4181_KIUDAT2 __preg16(KSEG1 + 0x0B000184) /* KIU Data2 Register (R/W) */ -#define VR4181_KIUDAT3 __preg16(KSEG1 + 0x0B000186) /* KIU Data3 Register (R/W) */ -#define VR4181_KIUDAT4 __preg16(KSEG1 + 0x0B000188) /* KIU Data4 Register (R/W) */ -#define VR4181_KIUDAT5 __preg16(KSEG1 + 0x0B00018A) /* KIU Data5 Register (R/W) */ -#define VR4181_KIUSCANREP __preg16(KSEG1 + 0x0B000190) /* KIU Scan/Repeat Register (R/W) */ -#define VR4181_KIUSCANREP_KEYEN 0x8000 -#define VR4181_KIUSCANREP_SCANSTP 0x0008 -#define VR4181_KIUSCANREP_SCANSTART 0x0004 -#define VR4181_KIUSCANREP_ATSTP 0x0002 -#define VR4181_KIUSCANREP_ATSCAN 0x0001 -#define VR4181_KIUSCANS __preg16(KSEG1 + 0x0B000192) /* KIU Scan Status Register (R) */ -#define VR4181_KIUWKS __preg16(KSEG1 + 0x0B000194) /* KIU Wait Keyscan Stable Register (R/W) */ -#define VR4181_KIUWKI __preg16(KSEG1 + 0x0B000196) /* KIU Wait Keyscan Interval Register (R/W) */ -#define VR4181_KIUINT __preg16(KSEG1 + 0x0B000198) /* KIU Interrupt Register (R/W) */ -#define VR4181_KIUINT_KDATLOST 0x0004 -#define VR4181_KIUINT_KDATRDY 0x0002 -#define VR4181_KIUINT_SCANINT 0x0001 -#define VR4181_KIUDAT6 __preg16(KSEG1 + 0x0B00018C) /* Scan Line 6 Key Data Register (R) */ -#define VR4181_KIUDAT7 __preg16(KSEG1 + 0x0B00018E) /* Scan Line 7 Key Data Register (R) */ - -// CompactFlash Controller -#define VR4181_PCCARDINDEX __preg8(KSEG1 + 0x0B0008E0) /* PC Card Controller Index Register */ -#define VR4181_PCCARDDATA __preg8(KSEG1 + 0x0B0008E1) /* PC Card Controller Data Register */ -#define VR4181_INTSTATREG __preg16(KSEG1 + 0x0B0008F8) /* Interrupt Status Register (R/W) */ -#define VR4181_INTMSKREG __preg16(KSEG1 + 0x0B0008FA) /* Interrupt Mask Register (R/W) */ -#define VR4181_CFG_REG_1 __preg16(KSEG1 + 0x0B0008FE) /* Configuration Register 1 */ - -// LED Control Unit (LED) -#define VR4181_LEDHTSREG __preg16(KSEG1 + 0x0B000240) /* LED H Time Set register (R/W) */ -#define VR4181_LEDLTSREG __preg16(KSEG1 + 0x0B000242) /* LED L Time Set register (R/W) */ -#define VR4181_LEDCNTREG __preg16(KSEG1 + 0x0B000248) /* LED Control register (R/W) */ -#define VR4181_LEDASTCREG __preg16(KSEG1 + 0x0B00024A) /* LED Auto Stop Time Count register (R/W) */ -#define VR4181_LEDINTREG __preg16(KSEG1 + 0x0B00024C) /* LED Interrupt register (R/W) */ - -// Serial Interface Unit (SIU / SIU1 and SIU2) -#define VR4181_SIURB __preg8(KSEG1 + 0x0C000010) /* Receiver Buffer Register (Read) DLAB = 0 (R) */ -#define VR4181_SIUTH __preg8(KSEG1 + 0x0C000010) /* Transmitter Holding Register (Write) DLAB = 0 (W) */ -#define VR4181_SIUDLL __preg8(KSEG1 + 0x0C000010) /* Divisor Latch (Least Significant Byte) DLAB = 1 (R/W) */ -#define VR4181_SIUIE __preg8(KSEG1 + 0x0C000011) /* Interrupt Enable DLAB = 0 (R/W) */ -#define VR4181_SIUDLM __preg8(KSEG1 + 0x0C000011) /* Divisor Latch (Most Significant Byte) DLAB = 1 (R/W) */ -#define VR4181_SIUIID __preg8(KSEG1 + 0x0C000012) /* Interrupt Identification Register (Read) (R) */ -#define VR4181_SIUFC __preg8(KSEG1 + 0x0C000012) /* FIFO Control Register (Write) (W) */ -#define VR4181_SIULC __preg8(KSEG1 + 0x0C000013) /* Line Control Register (R/W) */ -#define VR4181_SIUMC __preg8(KSEG1 + 0x0C000014) /* MODEM Control Register (R/W) */ -#define VR4181_SIULS __preg8(KSEG1 + 0x0C000015) /* Line Status Register (R/W) */ -#define VR4181_SIUMS __preg8(KSEG1 + 0x0C000016) /* MODEM Status Register (R/W) */ -#define VR4181_SIUSC __preg8(KSEG1 + 0x0C000017) /* Scratch Register (R/W) */ -#define VR4181_SIURESET __preg8(KSEG1 + 0x0C000019) /* SIU Reset Register (R/W) */ -#define VR4181_SIUACTMSK __preg8(KSEG1 + 0x0C00001C) /* SIU Activity Mask (R/W) */ -#define VR4181_SIUACTTMR __preg8(KSEG1 + 0x0C00001E) /* SIU Activity Timer (R/W) */ -#define VR4181_SIURB_2 __preg8(KSEG1 + 0x0C000000) /* Receive Buffer Register (Read) (R) */ -#define VR4181_SIUTH_2 __preg8(KSEG1 + 0x0C000000) /* Transmitter Holding Register (Write) (W) */ -#define VR4181_SIUDLL_2 __preg8(KSEG1 + 0x0C000000) /* Divisor Latch (Least Significant Byte) (R/W) */ -#define VR4181_SIUIE_2 __preg8(KSEG1 + 0x0C000001) /* Interrupt Enable (DLAB = 0) (R/W) */ -#define VR4181_SIUDLM_2 __preg8(KSEG1 + 0x0C000001) /* Divisor Latch (Most Significant Byte) (DLAB = 1) (R/W) */ -#define VR4181_SIUIID_2 __preg8(KSEG1 + 0x0C000002) /* Interrupt Identification Register (Read) (R) */ -#define VR4181_SIUFC_2 __preg8(KSEG1 + 0x0C000002) /* FIFO Control Register (Write) (W) */ -#define VR4181_SIULC_2 __preg8(KSEG1 + 0x0C000003) /* Line Control Register (R/W) */ -#define VR4181_SIUMC_2 __preg8(KSEG1 + 0x0C000004) /* Modem Control Register (R/W) */ -#define VR4181_SIULS_2 __preg8(KSEG1 + 0x0C000005) /* Line Status Register (R/W) */ -#define VR4181_SIUMS_2 __preg8(KSEG1 + 0x0C000006) /* Modem Status Register (R/W) */ -#define VR4181_SIUSC_2 __preg8(KSEG1 + 0x0C000007) /* Scratch Register (R/W) */ -#define VR4181_SIUIRSEL_2 __preg8(KSEG1 + 0x0C000008) /* SIU IrDA Selectot (R/W) */ -#define VR4181_SIURESET_2 __preg8(KSEG1 + 0x0C000009) /* SIU Reset Register (R/W) */ -#define VR4181_SIUCSEL_2 __preg8(KSEG1 + 0x0C00000A) /* IrDA Echo-back Control (R/W) */ -#define VR4181_SIUACTMSK_2 __preg8(KSEG1 + 0x0C00000C) /* SIU Activity Mask Register (R/W) */ -#define VR4181_SIUACTTMR_2 __preg8(KSEG1 + 0x0C00000E) /* SIU Activity Timer Register (R/W) */ - - -// USB Module -#define VR4181_USBINFIFO __preg16(KSEG1 + 0x0B000780) /* USB Bulk Input FIFO (Bulk In End Point) (W) */ -#define VR4181_USBOUTFIFO __preg16(KSEG1 + 0x0B000782) /* USB Bulk Output FIFO (Bulk Out End Point) (R) */ -#define VR4181_USBCTLFIFO __preg16(KSEG1 + 0x0B000784) /* USB Control FIFO (Control End Point) (W) */ -#define VR4181_USBSTAT __preg16(KSEG1 + 0x0B000786) /* Interrupt Status Register (R/W) */ -#define VR4181_USBINTMSK __preg16(KSEG1 + 0x0B000788) /* Interrupt Mask Register (R/W) */ -#define VR4181_USBCTLREG __preg16(KSEG1 + 0x0B00078A) /* Control Register (R/W) */ -#define VR4181_USBSTPREG __preg16(KSEG1 + 0x0B00078C) /* USB Transfer Stop Register (R/W) */ - -// LCD Controller -#define VR4181_HRTOTALREG __preg16(KSEG1 + 0x0A000400) /* Horizontal total Register (R/W) */ -#define VR4181_HRVISIBREG __preg16(KSEG1 + 0x0A000402) /* Horizontal Visible Register (R/W) */ -#define VR4181_LDCLKSTREG __preg16(KSEG1 + 0x0A000404) /* Load clock start Register (R/W) */ -#define VR4181_LDCLKNDREG __preg16(KSEG1 + 0x0A000406) /* Load clock end Register (R/W) */ -#define VR4181_VRTOTALREG __preg16(KSEG1 + 0x0A000408) /* Vertical Total Register (R/W) */ -#define VR4181_VRVISIBREG __preg16(KSEG1 + 0x0A00040A) /* Vertical Visible Register (R/W) */ -#define VR4181_FVSTARTREG __preg16(KSEG1 + 0x0A00040C) /* FLM vertical start Register (R/W) */ -#define VR4181_FVENDREG __preg16(KSEG1 + 0x0A00040E) /* FLM vertical end Register (R/W) */ -#define VR4181_LCDCTRLREG __preg16(KSEG1 + 0x0A000410) /* LCD control Register (R/W) */ -#define VR4181_LCDINRQREG __preg16(KSEG1 + 0x0A000412) /* LCD Interrupt request Register (R/W) */ -#define VR4181_LCDCFGREG0 __preg16(KSEG1 + 0x0A000414) /* LCD Configuration Register 0 (R/W) */ -#define VR4181_LCDCFGREG1 __preg16(KSEG1 + 0x0A000416) /* LCD Configuration Register 1 (R/W) */ -#define VR4181_FBSTAD1REG __preg16(KSEG1 + 0x0A000418) /* Frame Buffer Start Address 1 Register (R/W) */ -#define VR4181_FBSTAD2REG __preg16(KSEG1 + 0x0A00041A) /* Frame Buffer Start Address 2 Register (R/W) */ -#define VR4181_FBNDAD1REG __preg16(KSEG1 + 0x0A000420) /* Frame Buffer End Address 1 Register (R/W) */ -#define VR4181_FBNDAD2REG __preg16(KSEG1 + 0x0A000422) /* Frame Buffer End Address 2 register (R/W) */ -#define VR4181_FHSTARTREG __preg16(KSEG1 + 0x0A000424) /* FLM horizontal Start Register (R/W) */ -#define VR4181_FHENDREG __preg16(KSEG1 + 0x0A000426) /* FLM horizontal End Register (R/W) */ -#define VR4181_PWRCONREG1 __preg16(KSEG1 + 0x0A000430) /* Power Control register 1 (R/W) */ -#define VR4181_PWRCONREG2 __preg16(KSEG1 + 0x0A000432) /* Power Control register 2 (R/W) */ -#define VR4181_LCDIMSKREG __preg16(KSEG1 + 0x0A000434) /* LCD Interrupt Mask register (R/W) */ -#define VR4181_CPINDCTREG __preg16(KSEG1 + 0x0A00047E) /* Color palette Index and control Register (R/W) */ -#define VR4181_CPALDATREG __preg32(KSEG1 + 0x0A000480) /* Color palette data register (32bits Register) (R/W) */ - -// physical address spaces -#define VR4181_LCD 0x0a000000 -#define VR4181_INTERNAL_IO_2 0x0b000000 -#define VR4181_INTERNAL_IO_1 0x0c000000 -#define VR4181_ISA_MEM 0x10000000 -#define VR4181_ISA_IO 0x14000000 -#define VR4181_ROM 0x18000000 - -// This is the base address for IO port decoding to which the 16 bit IO port address -// is added. Defining it to 0 will usually cause a kernel oops any time port IO is -// attempted, which can be handy for turning up parts of the kernel that make -// incorrect architecture assumptions (by assuming that everything acts like a PC), -// but we need it correctly defined to use the PCMCIA/CF controller: -#define VR4181_PORT_BASE (KSEG1 + VR4181_ISA_IO) -#define VR4181_ISAMEM_BASE (KSEG1 + VR4181_ISA_MEM) - -#endif /* __ASM_VR4181_VR4181_H */ |