diff options
| -rw-r--r-- | drivers/serial/mpc52xx_uart.c | 200 |
1 files changed, 107 insertions, 93 deletions
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 141b8da7e0e..1e3721a0eef 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -36,7 +36,7 @@ * DCD. However, the pin multiplexing aren't changed and should be set either * by the bootloader or in the platform init code. * - * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2, + * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2, * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly * fpr the console code : without this 1:1 mapping, at early boot time, when we @@ -68,8 +68,8 @@ #include <linux/sysrq.h> #include <linux/console.h> -#include <asm/delay.h> -#include <asm/io.h> +#include <linux/delay.h> +#include <linux/io.h> #if defined(CONFIG_PPC_MERGE) #include <linux/of.h> @@ -116,13 +116,14 @@ static void mpc52xx_uart_of_enumerate(void); /* Forward declaration of the interruption handling routine */ -static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id); +static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); /* Simple macro to test if a port is console or not. This one is taken * for serial_core.c and maybe should be moved to serial_core.h ? */ #ifdef CONFIG_SERIAL_CORE_CONSOLE -#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) +#define uart_console(port) \ + ((port)->cons && (port)->cons->index == (port)->line) #else #define uart_console(port) (0) #endif @@ -164,7 +165,7 @@ mpc52xx_uart_stop_tx(struct uart_port *port) { /* port->lock taken by caller */ port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); } static void @@ -172,7 +173,7 @@ mpc52xx_uart_start_tx(struct uart_port *port) { /* port->lock taken by caller */ port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); } static void @@ -186,7 +187,7 @@ mpc52xx_uart_send_xchar(struct uart_port *port, char ch) /* Make sure tx interrupts are on */ /* Truly necessary ??? They should be anyway */ port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); } spin_unlock_irqrestore(&port->lock, flags); @@ -197,7 +198,7 @@ mpc52xx_uart_stop_rx(struct uart_port *port) { /* port->lock taken by caller */ port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); } static void @@ -212,10 +213,10 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) unsigned long flags; spin_lock_irqsave(&port->lock, flags); - if ( ctl == -1 ) - out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK); + if (ctl == -1) + out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK); else - out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK); + out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK); spin_unlock_irqrestore(&port->lock, flags); } @@ -234,10 +235,10 @@ mpc52xx_uart_startup(struct uart_port *port) return ret; /* Reset/activate the port, clear and enable interrupts */ - out_8(&psc->command,MPC52xx_PSC_RST_RX); - out_8(&psc->command,MPC52xx_PSC_RST_TX); + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); - out_be32(&psc->sicr,0); /* UART mode DCD ignored */ + out_be32(&psc->sicr, 0); /* UART mode DCD ignored */ out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */ @@ -247,10 +248,10 @@ mpc52xx_uart_startup(struct uart_port *port) out_be16(&fifo->tfalarm, 0x80); port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; - out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); - out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); return 0; } @@ -261,12 +262,12 @@ mpc52xx_uart_shutdown(struct uart_port *port) struct mpc52xx_psc __iomem *psc = PSC(port); /* Shut down the port. Leave TX active if on a console port */ - out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_RX); if (!uart_console(port)) - out_8(&psc->command,MPC52xx_PSC_RST_TX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); port->read_status_mask = 0; - out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); /* Release interrupt */ free_irq(port->irq, port); @@ -274,7 +275,7 @@ mpc52xx_uart_shutdown(struct uart_port *port) static void mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) + struct ktermios *old) { struct mpc52xx_psc __iomem *psc = PSC(port); unsigned long flags; @@ -286,14 +287,14 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, mr1 = 0; switch (new->c_cflag & CSIZE) { - case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; - break; - case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; - break; - case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; - break; - case CS8: - default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; } if (new->c_cflag & PARENB) { @@ -335,24 +336,24 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, udelay(1); if (!j) - printk( KERN_ERR "mpc52xx_uart.c: " + printk(KERN_ERR "mpc52xx_uart.c: " "Unable to flush RX & TX fifos in-time in set_termios." - "Some chars may have been lost.\n" ); + "Some chars may have been lost.\n"); /* Reset the TX & RX */ - out_8(&psc->command,MPC52xx_PSC_RST_RX); - out_8(&psc->command,MPC52xx_PSC_RST_TX); + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); /* Send new mode settings */ - out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&psc->mode,mr1); - out_8(&psc->mode,mr2); - out_8(&psc->ctur,ctr >> 8); - out_8(&psc->ctlr,ctr & 0xff); + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&psc->mode, mr1); + out_8(&psc->mode, mr2); + out_8(&psc->ctur, ctr >> 8); + out_8(&psc->ctlr, ctr & 0xff); /* Reenable TX & RX */ - out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); /* We're all set, release the lock */ spin_unlock_irqrestore(&port->lock, flags); @@ -367,7 +368,8 @@ mpc52xx_uart_type(struct uart_port *port) static void mpc52xx_uart_release_port(struct uart_port *port) { - if (port->flags & UPF_IOREMAP) { /* remapped by us ? */ + /* remapped by us ? */ + if (port->flags & UPF_IOREMAP) { iounmap(port->membase); port->membase = NULL; } @@ -382,7 +384,7 @@ mpc52xx_uart_request_port(struct uart_port *port) if (port->flags & UPF_IOREMAP) /* Need to remap ? */ port->membase = ioremap(port->mapbase, - sizeof(struct mpc52xx_psc)); + sizeof(struct mpc52xx_psc)); if (!port->membase) return -EINVAL; @@ -401,22 +403,22 @@ mpc52xx_uart_request_port(struct uart_port *port) static void mpc52xx_uart_config_port(struct uart_port *port, int flags) { - if ( (flags & UART_CONFIG_TYPE) && - (mpc52xx_uart_request_port(port) == 0) ) - port->type = PORT_MPC52xx; + if ((flags & UART_CONFIG_TYPE) + && (mpc52xx_uart_request_port(port) == 0)) + port->type = PORT_MPC52xx; } static int mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) { - if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx ) + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) return -EINVAL; - if ( (ser->irq != port->irq) || - (ser->io_type != SERIAL_IO_MEM) || - (ser->baud_base != port->uartclk) || - (ser->iomem_base != (void*)port->mapbase) || - (ser->hub6 != 0 ) ) + if ((ser->irq != port->irq) || + (ser->io_type != SERIAL_IO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void *)port->mapbase) || + (ser->hub6 != 0)) return -EINVAL; return 0; @@ -458,8 +460,8 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) unsigned short status; /* While we can read, do so ! */ - while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) & - MPC52xx_PSC_SR_RXRDY) { + while ((status = in_be16(&PSC(port)->mpc52xx_psc_status)) & + MPC52xx_PSC_SR_RXRDY) { /* Get the char */ ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8); @@ -477,9 +479,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) flag = TTY_NORMAL; port->icount.rx++; - if ( status & (MPC52xx_PSC_SR_PE | - MPC52xx_PSC_SR_FE | - MPC52xx_PSC_SR_RB) ) { + if (status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB)) { if (status & MPC52xx_PSC_SR_RB) { flag = TTY_BREAK; @@ -490,7 +492,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port) flag = TTY_FRAME; /* Clear error condition */ - out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT); + out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); } tty_insert_flip_char(tty, ch, flag); @@ -571,16 +573,16 @@ mpc52xx_uart_int(int irq, void *dev_id) /* Do we need to receive chars ? */ /* For this RX interrupts must be on and some chars waiting */ - if ( status & MPC52xx_PSC_IMR_RXRDY ) + if (status & MPC52xx_PSC_IMR_RXRDY) keepgoing |= mpc52xx_uart_int_rx_chars(port); /* Do we need to send chars ? */ /* For this, TX must be ready and TX interrupt enabled */ - if ( status & MPC52xx_PSC_IMR_TXRDY ) + if (status & MPC52xx_PSC_IMR_TXRDY) keepgoing |= mpc52xx_uart_int_tx_chars(port); /* Limit number of iteration */ - if ( !(--pass) ) + if (!(--pass)) keepgoing = 0; } while (keepgoing); @@ -599,7 +601,7 @@ mpc52xx_uart_int(int irq, void *dev_id) static void __init mpc52xx_console_get_options(struct uart_port *port, - int *baud, int *parity, int *bits, int *flow) + int *baud, int *parity, int *bits, int *flow) { struct mpc52xx_psc __iomem *psc = PSC(port); unsigned char mr1; @@ -607,7 +609,7 @@ mpc52xx_console_get_options(struct uart_port *port, pr_debug("mpc52xx_console_get_options(port=%p)\n", port); /* Read the mode registers */ - out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); mr1 = in_8(&psc->mode); /* CT{U,L}R are write-only ! */ @@ -619,11 +621,18 @@ mpc52xx_console_get_options(struct uart_port *port, /* Parse them */ switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { - case MPC52xx_PSC_MODE_5_BITS: *bits = 5; break; - case MPC52xx_PSC_MODE_6_BITS: *bits = 6; break; - case MPC52xx_PSC_MODE_7_BITS: *bits = 7; break; - case MPC52xx_PSC_MODE_8_BITS: - default: *bits = 8; + case MPC52xx_PSC_MODE_5_BITS: + *bits = 5; + break; + case MPC52xx_PSC_MODE_6_BITS: + *bits = 6; + break; + case MPC52xx_PSC_MODE_7_BITS: + *bits = 7; + break; + case MPC52xx_PSC_MODE_8_BITS: + default: + *bits = 8; } if (mr1 & MPC52xx_PSC_MODE_PARNONE) @@ -660,7 +669,7 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count) /* Wait the TX buffer to be empty */ j = 20000; /* Maximum wait */ while (!(in_be16(&psc->mpc52xx_psc_status) & - MPC52xx_PSC_SR_TXEMP) && --j) + MPC52xx_PSC_SR_TXEMP) && --j) udelay(1); } @@ -733,16 +742,18 @@ mpc52xx_console_setup(struct console *co, char *options) } pr_debug("Console on ttyPSC%x is %s\n", - co->index, mpc52xx_uart_nodes[co->index]->full_name); + co->index, mpc52xx_uart_nodes[co->index]->full_name); /* Fetch register locations */ - if ((ret = of_address_to_resource(np, 0, &res)) != 0) { + ret = of_address_to_resource(np, 0, &res); + if (ret) { pr_debug("Could not get resources for PSC%x\n", co->index); return ret; } /* Search for bus-frequency property in this node or a parent */ - if ((ipb_freq = mpc52xx_find_ipb_freq(np)) == 0) { + ipb_freq = mpc52xx_find_ipb_freq(np); + if (ipb_freq == 0) { pr_debug("Could not find IPB bus frequency!\n"); return -EINVAL; } @@ -760,7 +771,8 @@ mpc52xx_console_setup(struct console *co, char *options) return -EINVAL; pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", - (void*)port->mapbase, port->membase, port->irq, port->uartclk); + (void *)port->mapbase, port->membase, + port->irq, port->uartclk); /* Setup the port parameters accoding to options */ if (options) @@ -769,7 +781,7 @@ mpc52xx_console_setup(struct console *co, char *options) mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", - baud, bits, parity, flow); + baud, bits, parity, flow); return uart_set_options(port, co, baud, parity, bits, flow); } @@ -784,7 +796,7 @@ static struct console mpc52xx_console = { .device = uart_console_device, .setup = mpc52xx_console_setup, .flags = CON_PRINTBUFFER, - .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0 ) */ + .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ .data = &mpc52xx_uart_driver, }; @@ -812,7 +824,6 @@ console_initcall(mpc52xx_console_init); /* ======================================================================== */ static struct uart_driver mpc52xx_uart_driver = { - .owner = THIS_MODULE, .driver_name = "mpc52xx_psc_uart", .dev_name = "ttyPSC", .major = SERIAL_PSC_MAJOR, @@ -840,7 +851,7 @@ mpc52xx_uart_probe(struct platform_device *dev) if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM) return -EINVAL; - if (!mpc52xx_match_psc_function(idx,"uart")) + if (!mpc52xx_match_psc_function(idx, "uart")) return -ENODEV; /* Init the port structure */ @@ -851,13 +862,13 @@ mpc52xx_uart_probe(struct platform_device *dev) port->fifosize = 512; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF | - ( uart_console(port) ? 0 : UPF_IOREMAP ); + (uart_console(port) ? 0 : UPF_IOREMAP); port->line = idx; port->ops = &mpc52xx_uart_ops; port->dev = &dev->dev; /* Search for IRQ and mapbase */ - for (i=0 ; i<dev->num_resources ; i++, res++) { + for (i = 0 ; i < dev->num_resources ; i++, res++) { if (res->flags & IORESOURCE_MEM) port->mapbase = res->start; else if (res->flags & IORESOURCE_IRQ) @@ -869,7 +880,7 @@ mpc52xx_uart_probe(struct platform_device *dev) /* Add the port to the uart sub-system */ ret = uart_add_one_port(&mpc52xx_uart_driver, port); if (!ret) - platform_set_drvdata(dev, (void*)port); + platform_set_drvdata(dev, (void *)port); return ret; } @@ -920,6 +931,7 @@ static struct platform_driver mpc52xx_uart_platform_driver = { .resume = mpc52xx_uart_resume, #endif .driver = { + .owner = THIS_MODULE, .name = "mpc52xx-psc", }, }; @@ -949,10 +961,11 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) if (idx >= MPC52xx_PSC_MAXNUM) return -EINVAL; pr_debug("Found %s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[idx]->full_name, idx); + mpc52xx_uart_nodes[idx]->full_name, idx); /* Search for bus-frequency property in this node or a parent */ - if ((ipb_freq = mpc52xx_find_ipb_freq(op->node)) == 0) { + ipb_freq = mpc52xx_find_ipb_freq(op->node); + if (ipb_freq == 0) { dev_dbg(&op->dev, "Could not find IPB bus frequency!\n"); return -EINVAL; } @@ -965,22 +978,23 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) port->fifosize = 512; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF | - ( uart_console(port) ? 0 : UPF_IOREMAP ); + (uart_console(port) ? 0 : UPF_IOREMAP); port->line = idx; port->ops = &mpc52xx_uart_ops; port->dev = &op->dev; /* Search for IRQ and mapbase */ - if ((ret = of_address_to_resource(op->node, 0, &res)) != 0) + ret = of_address_to_resource(op->node, 0, &res); + if (ret) return ret; port->mapbase = res.start; port->irq = irq_of_parse_and_map(op->node, 0); dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", - (void*)port->mapbase, port->irq, port->uartclk); + (void *)port->mapbase, port->irq, port->uartclk); - if ((port->irq==NO_IRQ) || !port->mapbase) { + if ((port->irq == NO_IRQ) || !port->mapbase) { printk(KERN_ERR "Could not allocate resources for PSC\n"); return -EINVAL; } @@ -988,7 +1002,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) /* Add the port to the uart sub-system */ ret = uart_add_one_port(&mpc52xx_uart_driver, port); if (!ret) - dev_set_drvdata(&op->dev, (void*)port); + dev_set_drvdata(&op->dev, (void *)port); return ret; } @@ -1051,6 +1065,7 @@ mpc52xx_uart_of_assign(struct device_node *np, int idx) if (idx < 0) return; /* No free slot; abort */ + of_node_get(np); /* If the slot is already occupied, then swap slots */ if (mpc52xx_uart_nodes[idx] && (free_idx != -1)) mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx]; @@ -1060,7 +1075,7 @@ mpc52xx_uart_of_assign(struct device_node *np, int idx) static void mpc52xx_uart_of_enumerate(void) { - static int enum_done = 0; + static int enum_done; struct device_node *np; const unsigned int *devno; int i; @@ -1074,7 +1089,7 @@ mpc52xx_uart_of_enumerate(void) /* Is a particular device number requested? */ devno = of_get_property(np, "port-number", NULL); - mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1); + mpc52xx_uart_of_assign(np, devno ? *devno : -1); } enum_done = 1; @@ -1082,15 +1097,13 @@ mpc52xx_uart_of_enumerate(void) for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { if (mpc52xx_uart_nodes[i]) pr_debug("%s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[i]->full_name, i); + mpc52xx_uart_nodes[i]->full_name, i); } } MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); static struct of_platform_driver mpc52xx_uart_of_driver = { - .owner = THIS_MODULE, - .name = "mpc52xx-psc-uart", .match_table = mpc52xx_uart_of_match, .probe = mpc52xx_uart_of_probe, .remove = mpc52xx_uart_of_remove, @@ -1116,7 +1129,8 @@ mpc52xx_uart_init(void) printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); - if ((ret = uart_register_driver(&mpc52xx_uart_driver)) != 0) { + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret) { printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", __FILE__, ret); return ret; |