diff options
317 files changed, 4790 insertions, 2605 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index a30dd4480ad..681e2b36195 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -464,8 +464,8 @@ section Linus Computer Science 101. Nuff said. If your code deviates too much from this, it is likely to be rejected without further review, and without comment. -Once significant exception is when moving code from one file to -another in this case you should not modify the moved code at all in +One significant exception is when moving code from one file to +another -- in this case you should not modify the moved code at all in the same patch which moves it. This clearly delineates the act of moving the code and your changes. This greatly aids review of the actual differences and allows tools to better track the history of diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt index 2f75e750e4f..fc49b79bc1a 100644 --- a/Documentation/i386/boot.txt +++ b/Documentation/i386/boot.txt @@ -785,3 +785,41 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and After completing your hook, you should jump to the address that was in this field before your boot loader overwrote it (relocated, if appropriate.) + + +**** 32-bit BOOT PROTOCOL + +For machine with some new BIOS other than legacy BIOS, such as EFI, +LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel +based on legacy BIOS can not be used, so a 32-bit boot protocol needs +to be defined. + +In 32-bit boot protocol, the first step in loading a Linux kernel +should be to setup the boot parameters (struct boot_params, +traditionally known as "zero page"). The memory for struct boot_params +should be allocated and initialized to all zero. Then the setup header +from offset 0x01f1 of kernel image on should be loaded into struct +boot_params and examined. The end of setup header can be calculated as +follow: + + 0x0202 + byte value at offset 0x0201 + +In addition to read/modify/write the setup header of the struct +boot_params as that of 16-bit boot protocol, the boot loader should +also fill the additional fields of the struct boot_params as that +described in zero-page.txt. + +After setupping the struct boot_params, the boot loader can load the +32/64-bit kernel in the same way as that of 16-bit boot protocol. + +In 32-bit boot protocol, the kernel is started by jumping to the +32-bit kernel entry point, which is the start address of loaded +32/64-bit kernel. + +At entry, the CPU must be in 32-bit protected mode with paging +disabled; a GDT must be loaded with the descriptors for selectors +__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat +segment; __BOOS_CS must have execute/read permission, and __BOOT_DS +must have read/write permission; CS must be __BOOT_CS and DS, ES, SS +must be __BOOT_DS; interrupt must be disabled; %esi must hold the base +address of the struct boot_params; %ebp, %edi and %ebx must be zero. diff --git a/Documentation/i386/zero-page.txt b/Documentation/i386/zero-page.txt index 6c0817c4568..169ad423a3d 100644 --- a/Documentation/i386/zero-page.txt +++ b/Documentation/i386/zero-page.txt @@ -1,99 +1,31 @@ ---------------------------------------------------------------------------- -!!!!!!!!!!!!!!!WARNING!!!!!!!! -The zero page is a kernel internal data structure, not a stable ABI. It might change -without warning and the kernel has no way to detect old version of it. -If you're writing some external code like a boot loader you should only use -the stable versioned real mode boot protocol described in boot.txt. Otherwise the kernel -might break you at any time. -!!!!!!!!!!!!!WARNING!!!!!!!!!!! ----------------------------------------------------------------------------- +The additional fields in struct boot_params as a part of 32-bit boot +protocol of kernel. These should be filled by bootloader or 16-bit +real-mode setup code of the kernel. References/settings to it mainly +are in: -Summary of boot_params layout (kernel point of view) - ( collected by Hans Lermen and Martin Mares ) - -The contents of boot_params are used to pass parameters from the -16-bit realmode code of the kernel to the 32-bit part. References/settings -to it mainly are in: + include/asm-x86/bootparam.h - arch/i386/boot/setup.S - arch/i386/boot/video.S - arch/i386/kernel/head.S - arch/i386/kernel/setup.c - -Offset Type Description ------- ---- ----------- - 0 32 bytes struct screen_info, SCREEN_INFO - ATTENTION, overlaps the following !!! - 2 unsigned short EXT_MEM_K, extended memory size in Kb (from int 0x15) - 0x20 unsigned short CL_MAGIC, commandline magic number (=0xA33F) - 0x22 unsigned short CL_OFFSET, commandline offset - Address of commandline is calculated: - 0x90000 + contents of CL_OFFSET - (only taken, when CL_MAGIC = 0xA33F) - 0x40 20 bytes struct apm_bios_info, APM_BIOS_INFO - 0x60 16 bytes Intel SpeedStep (IST) BIOS support information - 0x80 16 bytes hd0-disk-parameter from intvector 0x41 - 0x90 16 bytes hd1-disk-parameter from intvector 0x46 +Offset Proto Name Meaning +/Size - 0xa0 16 bytes System description table truncated to 16 bytes. - ( struct sys_desc_table_struct ) - 0xb0 - 0x13f Free. Add more parameters here if you really need them. - 0x140- 0x1be EDID_INFO Video mode setup - -0x1c4 unsigned long EFI system table pointer -0x1c8 unsigned long EFI memory descriptor size -0x1cc unsigned long EFI memory descriptor version -0x1d0 unsigned long EFI memory descriptor map pointer -0x1d4 unsigned long EFI memory descriptor map size -0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb -0x1e4 unsigned long Scratch field for the kernel setup code -0x1e8 char number of entries in E820MAP (below) -0x1e9 unsigned char number of entries in EDDBUF (below) -0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below) -0x1f1 char size of setup.S, number of sectors -0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0) -0x1f4 unsigned short size of compressed kernel-part in the - (b)zImage-file (in 16 byte units, rounded up) -0x1f6 unsigned short swap_dev (unused AFAIK) -0x1f8 unsigned short RAMDISK_FLAGS -0x1fa unsigned short VGA-Mode (old one) -0x1fc unsigned short ORIG_ROOT_DEV (high=Major, low=minor) -0x1ff char AUX_DEVICE_INFO - -0x200 short jump to start of setup code aka "reserved" field. -0x202 4 bytes Signature for SETUP-header, ="HdrS" -0x206 unsigned short Version number of header format - Current version is 0x0201... -0x208 8 bytes (used by setup.S for communication with boot loaders, - look there) -0x210 char LOADER_TYPE, = 0, old one - else it is set by the loader: - 0xTV: T=0 for LILO - 1 for Loadlin - 2 for bootsect-loader - 3 for SYSLINUX - 4 for ETHERBOOT - 5 for ELILO - 7 for GRuB - 8 for U-BOOT - 9 for Xen - V = version -0x211 char loadflags: - bit0 = 1: kernel is loaded high (bzImage) - bit7 = 1: Heap and pointer (see below) set by boot - loader. -0x212 unsigned short (setup.S) -0x214 unsigned long KERNEL_START, where the loader started the kernel -0x218 unsigned long INITRD_START, address of loaded ramdisk image -0x21c unsigned long INITRD_SIZE, size in bytes of ramdisk image -0x220 4 bytes (setup.S) -0x224 unsigned short setup.S heap end pointer -0x226 unsigned short zero_pad -0x228 unsigned long cmd_line_ptr -0x22c unsigned long ramdisk_max -0x230 16 bytes trampoline -0x290 - 0x2cf EDD_MBR_SIG_BUFFER (edd.S) -0x2d0 - 0xd00 E820MAP -0xd00 - 0xeff EDDBUF (edd.S) for disk signature read sector -0xd00 - 0xeeb EDDBUF (edd.S) for edd data +000/040 ALL screen_info Text mode or frame buffer information + (struct screen_info) +040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info) +060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information + (struct ist_info) +080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! +090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! +0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) +140/080 ALL edid_info Video mode setup (struct edid_info) +1C0/020 ALL efi_info EFI 32 information (struct efi_info) +1E0/004 ALL alk_mem_k Alternative mem check, in KB +1E4/004 ALL scratch Scratch field for the kernel setup code +1E8/001 ALL e820_entries Number of entries in e820_map (below) +1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) +1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer + (below) +290/040 ALL edd_mbr_sig_buffer EDD MBR signatures +2D0/A00 ALL e820_map E820 memory map table + (array of struct e820entry) +D00/1EC ALL eddbuf EDD data (array of struct edd_info) diff --git a/Documentation/ja_JP/SubmittingPatches b/Documentation/ja_JP/SubmittingPatches new file mode 100644 index 00000000000..a9dc1243e85 --- /dev/null +++ b/Documentation/ja_JP/SubmittingPatches @@ -0,0 +1,556 @@ +NOTE: +This is a version of Documentation/SubmittingPatches into Japanese. +This document is maintained by Keiichi KII <k-keiichi@bx.jp.nec.com> +and the JF Project team <http://www.linux.or.jp/JF/>. +If you find any difference between this document and the original file +or a problem with the translation, +please contact the maintainer of this file or JF project. + +Please also note that the purpose of this file is to be easier to read +for non English (read: Japanese) speakers and is not intended as a +fork. So if you have any comments or updates of this file, please try +to update the original English file first. + +Last Updated: 2007/10/24 +================================== +これは、 +linux-2.6.23/Documentation/SubmittingPatches の和訳 +です。 +翻訳団体: JF プロジェクト < http://www.linux.or.jp/JF/ > +翻訳日: 2007/10/17 +翻訳者: Keiichi Kii <k-keiichi at bx dot jp dot nec dot com> +校正者: Masanari Kobayashi さん <zap03216 at nifty dot ne dot jp> + Matsukura さん <nbh--mats at nifty dot com> +================================== + + Linux カーネルに変更を加えるための Howto + 又は + かの Linus Torvalds の取り扱い説明書 + +Linux カーネルに変更を加えたいと思っている個人又は会社にとって、パッ +チの投稿に関連した仕組みに慣れていなければ、その過程は時々みなさんを +おじけづかせることもあります。この文章はあなたの変更を大いに受け入れ +てもらえやすくする提案を集めたものです。 + +コードを投稿する前に、Documentation/SubmitChecklist の項目リストに目 +を通してチェックしてください。もしあなたがドライバーを投稿しようとし +ているなら、Documentation/SubmittingDrivers にも目を通してください。 + +-------------------------------------------- +セクション1 パッチの作り方と送り方 +-------------------------------------------- + +1) 「 diff -up 」 +------------ + +パッチの作成には「 diff -up 」又は「 diff -uprN 」を使ってください。 + +Linux カーネルに対する全ての変更は diff(1) コマンドによるパッチの形式で +生成してください。パッチを作成するときには、diff(1) コマンドに「 -u 」引 +数を指定して、unified 形式のパッチを作成することを確認してください。また、 +変更がどの C 関数で行われたのかを表示する「 -p 」引数を使ってください。 +この引数は生成した差分をずっと読みやすくしてくれます。パッチは Linux +カーネルソースの中のサブディレクトリではなく Linux カーネルソースのルート +ディレクトリを基準にしないといけません。 + +1個のファイルについてのパッチを作成するためには、ほとんどの場合、 +以下の作業を行えば十分です。 + + SRCTREE= linux-2.6 + MYFILE= drivers/net/mydriver.c + + cd $SRCTREE + cp $MYFILE $MYFILE.orig + vi $MYFILE # make your change + cd .. + diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch + +複数のファイルについてのパッチを作成するためには、素の( vanilla )、す +なわち変更を加えてない Linux カーネルを展開し、自分の Linux カーネル +ソースとの差分を生成しないといけません。例えば、 + + MYSRC= /devel/linux-2.6 + + tar xvfz linux-2.6.12.tar.gz + mv linux-2.6.12 linux-2.6.12-vanilla + diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \ + linux-2.6.12-vanilla $MYSRC > /tmp/patch + +dontdiff ファイルには Linux カーネルのビルドプロセスの過程で生成された +ファイルの一覧がのっています。そして、それらはパッチを生成する diff(1) +コマンドで無視されるべきです。dontdiff ファイルは 2.6.12 以後のバージョ +ンの Linux カーネルソースツリーに含まれています。それより前のバージョン +の Linux カーネルソースツリーに対する dontdiff ファイルは、 +<http://www.xenotime.net/linux/doc/dontdiff>から取得することができます。 + +投稿するパッチの中に関係のない余分なファイルが含まれていないことを確 +認してください。diff(1) コマンドで生成したパッチがあなたの意図したとお +りのものであることを確認してください。 + +もしあなたのパッチが多くの差分を生み出すのであれば、あなたはパッチ +を意味のあるひとまとまりごとに分けたいと思うかもしれません。 +これは他のカーネル開発者にとってレビューしやすくなるので、あなたの +パッチを受け入れてもらうためにはとても重要なことです。これを補助でき +る多くのスクリプトがあります。 + +Quilt: +http://savannah.nongnu.org/projects/quilt + +Andrew Morton's patch scripts: +http://www.zip.com.au/~akpm/linux/patches/ +このリンクの先のスクリプトの代わりとして、quilt がパッチマネジメント +ツールとして推奨されています(上のリンクを見てください)。 + +2) パッチに対する説明 + +パッチの中の変更点に対する技術的な詳細について説明してください。 + +説明はできる限り具体的に。もっとも悪い説明は「ドライバー X を更新」、 +「ドライバー X に対するバグフィックス」あるいは「このパッチはサブシス +テム X に対する更新を含んでいます。どうか取り入れてください。」などです。 + +説明が長くなりだしたのであれば、おそらくそれはパッチを分ける必要がある +という兆候です。次の #3 を見てください。 + +3) パッチの分割 + +意味のあるひとまとまりごとに変更を個々のパッチファイルに分けてください。 + +例えば、もし1つのドライバーに対するバグフィックスとパフォーマンス強 +化の両方の変更を含んでいるのであれば、その変更を2つ以上のパッチに分 +けてください。もし変更箇所に API の更新と、その新しい API を使う新たな +ドライバーが含まれているなら、2つのパッチに分けてください。 + +一方で、もしあなたが多数のファイルに対して意味的に同じ1つの変更を加え +るのであれば、その変更を1つのパッチにまとめてください。言いかえると、 +意味的に同じ1つの変更は1つのパッチの中に含まれます。 + +あるパッチが変更を完結させるために他のパッチに依存していたとしても、 +それは問題ありません。パッチの説明の中で「このパッチはパッチ X に依存 +している」と簡単に注意書きをつけてください。 + +もしパッチをより小さなパッチの集合に凝縮することができないなら、まずは +15かそこらのパッチを送り、そのレビューと統合を待って下さい。 + +4) パッチのスタイルチェック + +あなたのパッチが基本的な( Linux カーネルの)コーディングスタイルに違反し +ていないかをチェックして下さい。その詳細を Documentation/CodingStyle で +見つけることができます。コーディングスタイルの違反はレビューする人の +時間を無駄にするだけなので、恐らくあなたのパッチは読まれることすらなく +拒否されるでしょう。 + +あなたはパッチを投稿する前に最低限パッチスタイルチェッカー +( scripts/patchcheck.pl )を利用してパッチをチェックすべきです。 +もしパッチに違反がのこっているならば、それらの全てについてあなたは正当な +理由を示せるようにしておく必要があります。 + +5) 電子メールの宛先の選び方 + +MAINTAINERS ファイルとソースコードに目を通してください。そして、その変 +更がメンテナのいる特定のサブシステムに加えられるものであることが分か +れば、その人に電子メールを送ってください。 + +もし、メンテナが載っていなかったり、メンテナからの応答がないなら、 +LKML ( linux-kernel@vger.kernel.org )へパッチを送ってください。ほとんど +のカーネル開発者はこのメーリングリストに目を通しており、変更に対して +コメントを得ることができます。 + +15個より多くのパッチを同時に vger.kernel.org のメーリングリストへ送らな +いでください!!! + +Linus Torvalds は Linux カーネルに入る全ての変更に対する最終的な意思決定者 +です。電子メールアドレスは torvalds@linux-foundation.org になります。彼は +多くの電子メールを受け取っているため、できる限り彼に電子メールを送るのは +避けるべきです。 + +バグフィックスであったり、自明な変更であったり、話し合いをほとんど +必要としないパッチは Linus へ電子メールを送るか CC しなければなりません。 +話し合いを必要としたり、明確なアドバンテージがないパッチは、通常まず +は LKML へ送られるべきです。パッチが議論された後にだけ、そのパッチを +Linus へ送るべきです。 + +6) CC (カーボンコピー)先の選び方 + +特に理由がないなら、LKML にも CC してください。 + +Linus 以外のカーネル開発者は変更に気づく必要があり、その結果、彼らはそ +の変更に対してコメントをくれたり、コードに対してレビューや提案をくれ +るかもしれません。LKML とは Linux カーネル開発者にとって一番中心的なメー +リングリストです。USB やフレームバッファデバイスや VFS や SCSI サブシステ +ムなどの特定のサブシステムに関するメーリングリストもあります。あなた +の変更に、はっきりと関連のあるメーリングリストについて知りたければ +MAINTAINERS ファイルを参照してください。 + +VGER.KERNEL.ORG でホスティングされているメーリングリストの一覧が下記の +サイトに載っています。 +<http://vger.kernel.org/vger-lists.html> + +もし、変更がユーザランドのカーネルインタフェースに影響を与え +るのであれば、MAN-PAGES のメンテナ( MAINTAINERS ファイルに一覧 +があります)に man ページのパッチを送ってください。少なくとも +情報がマニュアルページの中に入ってくるように、変更が起きたという +通知を送ってください。 + +たとえ、メンテナが #4 で反応がなかったとしても、メンテナのコードに変更を +加えたときには、いつもメンテナに CC するのを忘れないようにしてください。 + +小さなパッチであれば、Adrian Bunk が管理している Trivial Patch Monkey +(ちょっとしたパッチを集めている)<trivial@kernel.org>に CC してもいい +です。ちょっとしたパッチとは以下のルールのどれか1つを満たしていなけ +ればなりません。 + ・ドキュメントのスペルミスの修正 + ・grep(1) コマンドによる検索を困難にしているスペルの修正 + ・コンパイル時の警告の修正(無駄な警告が散乱することは好ましくないた + めです) + ・コンパイル問題の修正(それらの修正が本当に正しい場合に限る) + ・実行時の問題の修正(それらの修正が本当に問題を修正している場合に限る) + ・廃止予定の関数やマクロを使用しているコードの除去(例 check_region ) + ・問い合わせ先やドキュメントの修正 + ・移植性のないコードから移植性のあるコードへの置き換え(小さい範囲で + あればアーキテクチャ特有のことでも他の人がコピーできます) + ・作者やメンテナによる修正(すなわち patch monkey の再転送モード) +URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/> + +7) MIME やリンクや圧縮ファイルや添付ファイルではなくプレインテキストのみ + +Linus や他のカーネル開発者はあなたが投稿した変更を読んで、コメントでき +る必要があります。カーネル開発者にとって、あなたが書いたコードの特定の +部分にコメントをするために、標準的な電子メールクライアントで変更が引用 +できることは重要です。 + +上記の理由で、すべてのパッチは文中に含める形式の電子メールで投稿さ +れるべきです。警告:あなたがパッチをコピー&ペーストする際には、パッ +チを改悪するエディターの折り返し機能に注意してください。 + +パッチを圧縮の有無に関わらず MIME 形式で添付しないでください。多くのポ +ピュラーな電子メールクライアントは MIME 形式の添付ファイルをプレーンテ +キストとして送信するとは限らないでしょう。そうなると、電子メールクラ +イアントがコードに対するコメントを付けることをできなくします。また、 +MIME 形式の添付ファイルは Linus に手間を取らせることになり、その変更を +受け入れてもらう可能性が低くなってしまいます。 + +例外:お使いの電子メールクライアントがパッチをめちゃくちゃにするので +あれば、誰かが MIME 形式のパッチを再送するよう求めるかもしれません。 + +警告: Mozilla のような特定の電子メールクライアントは電子メールの +ヘッダに以下のものを付加して送ります。 +---- message header ---- +Content-Type: text/plain; charset=us-ascii; format=flowed +---- message header ---- +問題は、「 format=flowed 」が付いた電子メールを特定の受信側の電子メール +クライアントがタブをスペースに置き換えるというような変更をすることです。 +したがって送られてきたパッチは壊れているように見えるでしょう。 + +これを修正するには、mozilla の defaults/pref/mailnews.js ファイルを +以下のように修正します。 +pref("mailnews.send_plaintext_flowed", false); // RFC 2646======= +pref("mailnews.display.disable_format_flowed_support", true); + +8) 電子メールのサイズ + +パッチを Linus へ送るときは常に #7 の手順に従ってください。 + +大きなパッチはメーリングリストやメンテナにとって不親切です。パッチが +未圧縮で 40KB を超えるようであるなら、インターネット上のアクセス可能な +サーバに保存し、保存場所を示す URL を伝えるほうが適切です。 + +9) カーネルバージョンの明記 + +パッチが対象とするカーネルのバージョンをパッチの概要か電子メールの +サブジェクトに付けることが重要です。 + +パッチが最新バージョンのカーネルに正しく適用できなければ、Linus は +そのパッチを採用しないでしょう。 + +10) がっかりせず再投稿 + +パッチを投稿した後は、辛抱強く待っていてください。Linus があなたのパッ +チを気に入って採用すれば、Linus がリリースする次のバージョンのカーネル +の中で姿を見せるでしょう。 + +しかし、パッチが次のバージョンのカーネルに入っていないなら、いくつもの +理由があるのでしょう。その原因を絞り込み、間違っているものを正し、更新 +したパッチを投稿するのはあなたの仕事です。 + +Linus があなたのパッチに対して何のコメントもなく不採用にすることは極め +て普通のことです。それは自然な姿です。もし、Linus があなたのパッチを受 +け取っていないのであれば、以下の理由が考えられます。 +* パッチが最新バージョンの Linux カーネルにきちんと適用できなかった +* パッチが LKML で十分に議論されていなかった +* スタイルの問題(セクション2を参照) +* 電子メールフォーマットの問題(このセクションを参照) +* パッチに対する技術的な問題 +* Linus はたくさんの電子メールを受け取っているので、どさくさに紛れて見 + 失った +* 不愉快にさせている + +判断できない場合は、LKML にコメントを頼んでください。 + +11) サブジェクトに「 PATCH 」 + +Linus や LKML への大量の電子メールのために、サブジェクトのプレフィックスに +「 [PATCH] 」を付けることが慣習となっています。これによって Linus や他の +カーネル開発者がパッチであるのか、又は、他の議論に関する電子メールであるの +かをより簡単に識別できます。 + +12) パッチへの署名 + +誰が何をしたのかを追いかけやすくするために (特に、パッチが何人かの +メンテナを経て最終的に Linux カーネルに取り込まれる場合のために)、電子 +メールでやり取りされるパッチに対して「 sign-off 」という手続きを導入し +ました。 + +「 sign-off 」とは、パッチがあなたの書いたものであるか、あるいは、 +あなたがそのパッチをオープンソースとして提供する権利を保持している、 +という証明をパッチの説明の末尾に一行記載するというものです。 +ルールはとても単純です。以下の項目を確認して下さい。 + + 原作者の証明書( DCO ) 1.1 + + このプロジェクトに寄与するものとして、以下のことを証明する。 + + (a) 本寄与は私が全体又は一部作成したものであり、私がそのファイ + ル中に明示されたオープンソースライセンスの下で公開する権利 + を持っている。もしくは、 + + (b) 本寄与は、私が知る限り、適切なオープンソースライセンスでカバ + ーされている既存の作品を元にしている。同時に、私はそのライセ + ンスの下で、私が全体又は一部作成した修正物を、ファイル中で示 + される同一のオープンソースライセンスで(異なるライセンスの下で + 投稿することが許可されている場合を除いて)投稿する権利を持って + いる。もしくは、 + + (c) 本寄与は(a)、(b)、(c)を証明する第3者から私へ直接提供された + ものであり、私はそれに変更を加えていない。 + + (d) 私はこのプロジェクトと本寄与が公のものであることに理解及び同意す + る。同時に、関与した記録(投稿の際の全ての個人情報と sign-off を + 含む)が無期限に保全されることと、当該プロジェクト又は関連する + オープンソースライセンスに沿った形で再配布されることに理解及び + 同意する。 + +もしこれに同意できるなら、以下のような1行を追加してください。 + + Signed-off-by: Random J Developer <random@developer.example.org> + +実名を使ってください。(残念ですが、偽名や匿名による寄与はできません。) + +人によっては sign-off の近くに追加のタグを付加しています。それらは今のところ +無視されますが、あなたはそのタグを社内の手続きに利用したり、sign-off に特別 +な情報を示したりすることができます。 + +13) いつ Acked-by: を使うのか + +「 Signed-off-by: 」タグはその署名者がパッチの開発に関わっていたことやパッチ +の伝播パスにいたことを示しています。 + +ある人が直接パッチの準備や作成に関わっていないけれど、その人のパッチに対す +る承認を記録し、示したいとします。その場合、その人を示すのに Acked-by: が使 +えます。Acked-by: はパッチのチェンジログにも追加されます。 + +パッチの影響を受けるコードのメンテナがパッチに関わっていなかったり、パッチ +の伝播パスにいなかった時にも、メンテナは Acked-by: をしばしば利用します。 + +Acked-by: は Signed-off-by: のように公式なタグではありません。それはメンテナが +少なくともパッチをレビューし、同意を示しているという記録です。そのような +ことからパッチの統合者がメンテナの「うん、良いと思うよ」という発言を +Acked-by: へ置き換えることがあります。 + +Acked-by: が必ずしもパッチ全体の承認を示しているわけではありません。例えば、 +あるパッチが複数のサブシステムへ影響を与えており、その中の1つのサブシステム +のメンテナからの Acked-by: を持っているとします。その場合、Acked-by: は通常 +そのメンテナのコードに影響を与える一部分だけに対する承認を示しています。 +この点は、ご自分で判断してください。(その Acked-by: が)疑わしい場合は、 +メーリングリストアーカイブの中の大元の議論を参照すべきです。 + +14) 標準的なパッチのフォーマット + +標準的なパッチのサブジェクトは以下のとおりです。 + + Subject: [PATCH 001/123] subsystem: summary phrase + +標準的なパッチの、電子メールのボディは以下の項目を含んでいます。 + + - パッチの作成者を明記する「 from 」行 + + - 空行 + + - 説明本体。これはこのパッチを説明するために無期限のチェンジログ + (変更履歴)にコピーされます。 + + - 上述した「 Signed-off-by: 」行。これも説明本体と同じくチェン + ジログ内にコピーされます。 + + - マーカー行は単純に「 --- 」です。 + + - 余計なコメントは、チェンジログには不適切です。 + + - 実際のパッチ(差分出力) + +サブジェクト行のフォーマットは、アルファベット順で電子メールをとても +ソートしやすいものになっています。(ほとんどの電子メールクライアント +はソートをサポートしています)パッチのサブジェクトの連番は0詰めであ +るため、数字でのソートとアルファベットでのソートは同じ結果になります。 + +電子メールのサブジェクト内のサブシステム表記は、パッチが適用される +分野またはサブシステムを識別できるようにすべきです。 + +電子メールのサブジェクトの「概要の言い回し」はそのパッチの概要を正確 +に表現しなければなりません。「概要の言い回し」をファイル名にしてはい +けません。一連のパッチ中でそれぞれのパッチは同じ「概要の言い回し」を +使ってはいけません(「一連のパッチ」とは順序付けられた関連のある複数の +パッチ群です)。 + +あなたの電子メールの「概要の言い回し」がそのパッチにとって世界で唯 +一の識別子になるように心がけてください。「概要の言い回し」は git の +チェンジログの中へずっと伝播していきます。「概要の言い回し」は、開 +発者が後でパッチを参照するために議論の中で利用するかもしれません。 +人々はそのパッチに関連した議論を読むために「概要の言い回し」を使って +google で検索したがるでしょう。 + +サブジェクトの例を二つ + + Subject: [patch 2/5] ext2: improve scalability of bitmap searching + Subject: [PATCHv2 001/207] x86: fix eflags tracking + +「 from 」行は電子メールのボディの一番最初の行でなければなりません。 +その形式は以下のとおりです。 + + From: Original Author <author@example.com> + +「 from 」行はチェンジログの中で、そのパッチの作成者としてクレジットされ +ている人を特定するものです。「 from 」行がかけていると、電子メールのヘッ +ダーの「 From: 」が、チェンジログの中でパッチの作成者を決定するために使わ +れるでしょう。 + +説明本体は無期限のソースのチェンジログにコミットされます。なので、説明 +本体はそのパッチに至った議論の詳細を忘れているある程度の技量を持っている人 +がその詳細を思い出すことができるものでなければなりません。 + +「 --- 」マーカー行はパッチ処理ツールに対して、チェンジログメッセージの終端 +部分を認識させるという重要な役目を果たします。 + +「 --- 」マーカー行の後の追加コメントの良い使用方法の1つに diffstat コマンド +があります。diffstat コマンドとは何のファイルが変更され、1ファイル当たり何行 +追加され何行消されたかを示すものです。diffstat コマンドは特に大きなパッチに +おいて役立ちます。その時点でだけ又はメンテナにとってのみ関係のあるコメント +は無期限に保存されるチェンジログにとって適切ではありません。そのため、この +ようなコメントもマーカー行の後に書かれるべきです。ファイル名はカーネルソー +スツリーのトップディレクトリからの表記でリストされるため、横方向のスペース +をとり過ぎないように、diffstat コマンドにオプション「 -p 1 -w 70 」を指定し +てください(インデントを含めてちょうど80列に合うでしょう)。 + +適切なパッチのフォーマットの詳細についてはセクション3の参考文献を参照して +ください。 + +------------------------------------ +セクション2 - ヒントとTIPSと小技 +------------------------------------ + +このセクションは Linux カーネルに変更を適用することに関係のある一般的な +「お約束」の多くを載せています。物事には例外というものがあります。しか +し例外を適用するには、本当に妥当な理由が不可欠です。あなたは恐らくこの +セクションを Linus のコンピュータ・サイエンス101と呼ぶでしょう。 + +1) Documentation/CodingStyleを参照 + +言うまでもなく、あなたのコードがこのコーディングスタイルからあまりに +も逸脱していると、レビューやコメントなしに受け取ってもらえないかもし +れません。 + +唯一の特筆すべき例外は、コードをあるファイルから別のファイルに移動 +するときです。この場合、コードを移動するパッチでは、移動されるコード +に関して移動以外の変更を一切加えるべきではありません。これにより、 +コードの移動とあなたが行ったコードの修正を明確に区別できるようにな +ります。これは実際に何が変更されたかをレビューする際の大きな助けに +なるとともに、ツールにコードの履歴を追跡させることも容易になります。 + +投稿するより前にパッチのスタイルチェッカー( scripts/checkpatch.pl )で +あなたのパッチをチェックしてください。このスタイルチェッカーは最終結 +論としてではなく、指標としてみるべきです。もし、あなたのコードが違反 +はしているが修正するより良く見えるのであれば、おそらくそのままにする +のがベストです。 + +スタイルチェッカーによる3段階のレポート: + - エラー: 間違っている可能性が高い + - 警告:注意してレビューする必要がある + - チェック:考慮する必要がある + +あなたはパッチに残っている全ての違反について、それがなぜ必要なのか正当な +理由を示せるようにしておく必要があります。 + +2) #ifdefは見苦しい + +ifdef が散乱したコードは、読むのもメンテナンスするのも面倒です。コードの中 +で ifdef を使わないでください。代わりに、ヘッダファイルの中に ifdef を入れて、 +条件付きで、コードの中で使われる関数を「 static inline 」関数かマクロで定義し +てください。後はコンパイラが、何もしない箇所を最適化して取り去ってくれるで +しょう。 + +まずいコードの簡単な例 + + dev = alloc_etherdev (sizeof(struct funky_private)); + if (!dev) + return -ENODEV; + #ifdef CONFIG_NET_FUNKINESS + init_funky_net(dev); + #endif + +クリーンアップしたコードの例 + +(in header) + #ifndef CONFIG_NET_FUNKINESS + static inline void init_funky_net (struct net_device *d) {} + #endif + +(in the code itself) + dev = alloc_etherdev (sizeof(struct funky_private)); + if (!dev) + return -ENODEV; + init_funky_net(dev); + +3) マクロより「 static inline 」を推奨 + +「 static inline 」関数はマクロよりもずっと推奨されています。それらは、 +型安全性があり、長さにも制限が無く、フォーマットの制限もありません。 +gcc においては、マクロと同じくらい軽いです。 + +マクロは「 static inline 」が明らかに不適切であると分かる場所(高速化パスの +いくつかの特定のケース)や「 static inline 」関数を使うことができないような +場所(マクロの引数の文字列連結のような)にだけ使われるべきです。 + +「 static inline 」は「 static __inline__ 」や「 extern inline 」や +「 extern __inline__ 」よりも適切です。 + +4) 設計に凝りすぎるな + +それが有用になるかどうか分からないような不明瞭な将来を見越した設計 +をしないでください。「できる限り簡単に、そして、それ以上簡単になら +ないような設計をしてください。」 + +---------------------- +セクション3 参考文献 +---------------------- + +Andrew Morton, "The perfect patch" (tpp). + <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt> + +Jeff Garzik, "Linux kernel patch submission format". + <http://linux.yyz.us/patch-format.html> + +Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". + <http://www.kroah.com/log/2005/03/31/> + <http://www.kroah.com/log/2005/07/08/> + <http://www.kroah.com/log/2005/10/19/> + <http://www.kroah.com/log/2006/01/11/> + +NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! + <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2> + +Kernel Documentation/CodingStyle: + <http://users.sosdg.org/~qiyong/lxr/source/Documentation/CodingStyle> + +Linus Torvalds's mail on the canonical patch format: + <http://lkml.org/lkml/2005/4/7/183> +-- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8ae5fac08df..33121d6c827 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -586,11 +586,6 @@ and is between 256 and 4096 characters. It is defined in the file eata= [HW,SCSI] - ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode - Format: <int> - 0: polling mode - non-0: interrupt mode (default) - edd= [EDD] Format: {"of[f]" | "sk[ipmbr]"} See comment in arch/i386/boot/edd.S diff --git a/MAINTAINERS b/MAINTAINERS index 231bda28c42..6c0e44bbf60 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -216,7 +216,7 @@ P: Len Brown M: len.brown@intel.com M: lenb@kernel.org L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git S: Supported @@ -235,8 +235,8 @@ W: http://acpi.sourceforge.net/ S: Supported ACPI FAN DRIVER -P: Konstantin A. Karasyov -M: konstantin.a.karasyov@intel.com +P: Len Brown +M: len.brown@intel.com L: linux-acpi@vger.kernel.org W: http://acpi.sourceforge.net/ S: Supported @@ -248,15 +248,15 @@ L: pcihpd-discuss@lists.sourceforge.net S: Supported ACPI THERMAL DRIVER -P: Konstantin A. Karasyov -M: konstantin.a.karasyov@intel.com +P: Len Brown +M: len.brown@intel.com L: linux-acpi@vger.kernel.org W: http://acpi.sourceforge.net/ S: Supported ACPI VIDEO DRIVER -P: Luming Yu -M: luming.yu@intel.com +P: Rui Zhang +M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://acpi.sourceforge.net/ S: Supported @@ -398,6 +398,12 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained +APPLETOUCH TOUCHPAD DRIVER +P: Johannes Berg +M: johannes@sipsolutions.net +L: linux-input@vger.kernel.org +S: Maintained + ARC FRAMEBUFFER DRIVER P: Jaya Kumar M: jayalk@intworks.biz @@ -1701,7 +1707,7 @@ S: Maintained HID CORE LAYER P: Jiri Kosina M: jkosina@suse.cz -L: linux-input@atrey.karlin.mff.cuni.cz +L: linux-input@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained @@ -1927,8 +1933,7 @@ INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS P: Dmitry Torokhov M: dmitry.torokhov@gmail.com M: dtor@mail.ru -L: linux-input@atrey.karlin.mff.cuni.cz -L: linux-joystick@atrey.karlin.mff.cuni.cz +L: linux-input@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git S: Maintained @@ -3472,12 +3477,14 @@ L: linux-pm@lists.linux-foundation.org S: Supported SUSPEND TO RAM: +P: Len Brown +M: len.brown@intel.com P: Pavel Machek M: pavel@suse.cz P: Rafael J. Wysocki M: rjw@sisk.pl L: linux-pm@lists.linux-foundation.org -S: Maintained +S: Supported SONIC NETWORK DRIVER P: Thomas Bogendoerfer diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig new file mode 100644 index 00000000000..7949d04a360 --- /dev/null +++ b/arch/arm/configs/zylonite_defconfig @@ -0,0 +1,736 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23 +# Tue Oct 23 13:33:20 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +CONFIG_CPU_PXA310=y +CONFIG_CPU_PXA320=y +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_MACH_ZYLONITE=y +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA3xx=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig index 86f53f8ccbf..08d2707f6ca 100644 --- a/arch/arm/mach-ixp2000/Kconfig +++ b/arch/arm/mach-ixp2000/Kconfig @@ -14,7 +14,7 @@ config ARCH_ENP2611 help Say 'Y' here if you want your kernel to support the Radisys ENP2611 PCI network processing card. For more information on - this card, see <file:Documentation/arm/ENP2611>. + this card, see <file:Documentation/arm/IXP2000>. config ARCH_IXDP2400 bool "Support Intel IXDP2400" diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c index 172a058ddd6..bd5184fe177 100644 --- a/arch/arm/mach-netx/xc.c +++ b/arch/arm/mach-netx/xc.c @@ -190,15 +190,15 @@ struct xc *request_xc(int xcno, struct device *dev) goto exit; if (!request_mem_region - (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, dev->kobj.name)) + (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(dev->kobj))) goto exit_free; if (!request_mem_region - (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, dev->kobj.name)) + (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(dev->kobj))) goto exit_release_1; if (!request_mem_region - (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, dev->kobj.name)) + (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(dev->kobj))) goto exit_release_2; x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno)); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index b0921622566..130681201c1 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -343,6 +343,7 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; +#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata h2_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), @@ -356,6 +357,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { * - ... etc */ }; +#endif static void __init h2_init_smc91x(void) { @@ -467,8 +469,10 @@ static void __init h2_init(void) if (gpio_request(58, "tps65010") == 0) gpio_direction_input(58); +#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(1, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); +#endif } static void __init h2_map_io(void) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d9af4367f8b..e6e85b7b097 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -651,7 +651,7 @@ static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, break; case CM_SYSCLKOUT_SEL1: div_addr = (u32)&PRCM_CLKOUT_CTRL; - if ((div_off == 3) || (div_off = 11)) + if ((div_off == 3) || (div_off == 11)) mask= 0x3; break; case CM_CORE_SEL1: diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c index 5cd3cadbbd1..436f9657496 100644 --- a/arch/arm/mach-pxa/mfp.c +++ b/arch/arm/mach-pxa/mfp.c @@ -5,7 +5,7 @@ * * Copyright (C) 2007 Marvell Internation Ltd. * - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 7a34231f317..0a0d3877f21 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -5,7 +5,7 @@ * * Copyright (C) 2007 Marvell Internation Ltd. * - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index cd9eba5b3df..1010f77d977 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -5,7 +5,7 @@ * * Copyright (C) 2007 Marvell Internation Ltd. * - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 39f0de8c189..5da798282a5 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -5,7 +5,7 @@ * * Copyright (C) 2006 Marvell International Ltd. * - * 2007-09-02: eric miao <eric.y.miao@gmail.com> + * 2007-09-02: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index ec4286c7931..a2d45d742ce 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -151,6 +151,9 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) OIER &= ~OIER_E0; raw_local_irq_restore(irqflags); break; + + case CLOCK_EVT_MODE_RESUME: + break; } } diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 3f18d760dd1..743a87b2faa 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -5,7 +5,7 @@ * * Copyright (C) 2006 Marvell International Ltd. * - * 2007-09-04: eric miao <eric.y.miao@gmail.com> + * 2007-09-04: eric miao <eric.miao@marvell.com> * rewrite to align with latest kernel * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index b5fbd2f4c69..1832bc31650 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -5,7 +5,7 @@ * PXA3xx Development Platform (aka Zylonite) * * Copyright (C) 2007 Marvell Internation Ltd. - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 63cb36be086..94c715808b5 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -5,7 +5,7 @@ * PXA3xx Development Platform (aka Zylonite) * * Copyright (C) 2007 Marvell Internation Ltd. - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 5b80b6bdd0c..194ef48968e 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -105,9 +105,13 @@ ENTRY(cpu_arm926_do_idle) mrc p15, 0, r1, c1, c0, 0 @ Read control register mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer bic r2, r1, #1 << 12 + mrs r3, cpsr @ Disable FIQs while Icache + orr ip, r3, #PSR_F_BIT @ is disabled + msr cpsr_c, ip mcr p15, 0, r2, c1, c0, 0 @ Disable I cache mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable + msr cpsr_c, r3 @ Restore FIQ state mov pc, lr /* diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 7888551ed93..9f9de3e9582 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -295,6 +295,12 @@ config PNAV10 help PNAV 1.0 board Support. +config H8606_HVSISTEMAS + bool "HV Sistemas H8606" + depends on (BF532) + help + HV Sistemas H8606 board support. + config GENERIC_BOARD bool "Custom" depends on (BF537 || BF536 \ @@ -317,7 +323,8 @@ config MEM_MT48LC64M4A2FB_7E config MEM_MT48LC16M16A2TG_75 bool depends on (BFIN533_EZKIT || BFIN561_EZKIT \ - || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM) + || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \ + || H8606_HVSISTEMAS) default y config MEM_MT48LC32M8A2_75 @@ -366,7 +373,7 @@ config CLKIN_HZ int "Crystal Frequency in Hz" default "11059200" if BFIN533_STAMP default "27000000" if BFIN533_EZKIT - default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT) + default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS) default "30000000" if BFIN561_EZKIT default "24576000" if PNAV10 help @@ -404,6 +411,7 @@ config VCO_MULT default "20" if BFIN537_BLUETECHNIX_CM default "20" if BFIN561_BLUETECHNIX_CM default "20" if BFIN561_EZKIT + default "16" if H8606_HVSISTEMAS help This controls the frequency of the on-chip PLL. This can be between 1 and 64. PLL Frequency = (Crystal Frequency) * (this setting) @@ -440,6 +448,7 @@ config SCLK_DIV default 4 if BFIN537_BLUETECHNIX_CM default 4 if BFIN561_BLUETECHNIX_CM default 5 if BFIN561_EZKIT + default 3 if H8606_HVSISTEMAS help This sets the frequency of the system clock (including SDRAM or DDR). This can be between 1 and 15 @@ -492,11 +501,13 @@ config MEM_SIZE default 64 if BFIN561_EZKIT default 128 if BFIN533_STAMP default 64 if PNAV10 + default 32 if H8606_HVSISTEMAS config MEM_ADD_WIDTH int "SDRAM Memory Address Width" default 9 if BFIN533_EZKIT default 9 if BFIN561_EZKIT + default 9 if H8606_HVSISTEMAS default 10 if BFIN527_EZKIT default 10 if BFIN537_STAMP default 11 if BFIN533_STAMP diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index df974e785ee..1f6a93df6b3 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -244,7 +244,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 57f58d5cd47..9e9b420342d 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -198,7 +198,7 @@ CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 306302baff0..f59ade98010 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -199,7 +199,7 @@ CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 828b604438e..07eb63dc25e 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -206,7 +206,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index d8569888a1c..0dd3d2253dc 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.6 +# Linux kernel version: 2.6.22.10 +# Sat Oct 27 02:34:07 2007 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -64,7 +65,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 @@ -117,6 +117,9 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set # CONFIG_BF533 is not set @@ -129,6 +132,7 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BF549=y # CONFIG_BF561 is not set CONFIG_BF_REV_0_0=y +# CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set @@ -137,6 +141,7 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN527_EZKIT is not set # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set # CONFIG_BFIN537_STAMP is not set @@ -147,8 +152,23 @@ CONFIG_BFIN548_EZKIT=y # CONFIG_BFIN561_EZKIT is not set # CONFIG_BFIN561_TEPLA is not set # CONFIG_PNAV10 is not set +# CONFIG_H8606_HVSISTEMAS is not set # CONFIG_GENERIC_BOARD is not set CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_CNT=8 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_TIMER0=11 CONFIG_IRQ_TIMER1=11 CONFIG_IRQ_TIMER2=11 @@ -160,15 +180,6 @@ CONFIG_IRQ_TIMER7=11 CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 -CONFIG_IRQ_RTC=8 -CONFIG_IRQ_SPORT0_RX=9 -CONFIG_IRQ_SPORT0_TX=9 -CONFIG_IRQ_SPORT1_RX=9 -CONFIG_IRQ_SPORT1_TX=9 -CONFIG_IRQ_UART0_RX=10 -CONFIG_IRQ_UART0_TX=10 -CONFIG_IRQ_UART1_RX=10 -CONFIG_IRQ_UART1_TX=10 # # BF548 Specific Configuration @@ -236,16 +247,11 @@ CONFIG_IRQ_PIXC_IN0=8 CONFIG_IRQ_PIXC_IN1=8 CONFIG_IRQ_PIXC_OUT=8 CONFIG_IRQ_SDH=8 -CONFIG_IRQ_CNT=8 CONFIG_IRQ_KEY=8 CONFIG_IRQ_CAN1_RX=11 CONFIG_IRQ_CAN1_TX=11 CONFIG_IRQ_SDH_MASK0=11 CONFIG_IRQ_SDH_MASK1=11 -CONFIG_IRQ_USB_INT0=11 -CONFIG_IRQ_USB_INT1=11 -CONFIG_IRQ_USB_INT2=11 -CONFIG_IRQ_USB_DMA=11 CONFIG_IRQ_OTPSEC=11 CONFIG_IRQ_PINT2=11 CONFIG_IRQ_PINT3=11 @@ -273,9 +279,9 @@ CONFIG_PINT3_ASSIGN=0x02020303 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_VCO_HZ=533000000 +CONFIG_MAX_VCO_HZ=533333333 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -332,9 +338,10 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y -# CONFIG_DMA_UNCACHED_2M is not set -CONFIG_DMA_UNCACHED_1M=y +CONFIG_DMA_UNCACHED_2M=y +# CONFIG_DMA_UNCACHED_1M is not set # CONFIG_DMA_UNCACHED_NONE is not set # @@ -353,7 +360,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y # CONFIG_C_AMBEN is not set @@ -722,7 +729,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=y +CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set @@ -731,18 +738,39 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_TSDEV=m +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_KEYBOARD_BFIN=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +CONFIG_TOUCHSCREEN_AD7877=m +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set @@ -764,9 +792,9 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BFIN_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set @@ -958,17 +986,92 @@ CONFIG_DAB=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set -# CONFIG_FB is not set +CONFIG_FB=m +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_BFIN_7171 is not set +# CONFIG_FB_BFIN_7393 is not set +CONFIG_FB_BF54X_LQ043=m +# CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_LOGO is not set # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BFIN_AD73311 is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=y +CONFIG_SND_BF5XX_SOC=y +CONFIG_SND_BF5XX_SOC_AC97=y +CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_AD1980=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y # # HID Devices # -CONFIG_HID=y +CONFIG_HID=m # CONFIG_HID_DEBUG is not set # @@ -1101,8 +1204,13 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1123,15 +1231,22 @@ CONFIG_DNOTIFY=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y # # Pseudo filesystems @@ -1183,10 +1298,33 @@ CONFIG_JFFS2_RTIME=y # # Network File Systems # -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1195,13 +1333,68 @@ CONFIG_JFFS2_RTIME=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m # # Distributed Lock Manager diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 85e647f8775..277d72dac0f 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -243,7 +243,7 @@ CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 15e36aaf218..3d403e0b82c 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -204,7 +204,7 @@ CONFIG_CLKIN_HZ=24576000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 65c5ba4260b..65f4e67a65c 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -54,9 +54,11 @@ ENTRY(_ret_from_fork) [sp + PT_IPEND] = r0; /* do a 'fake' RTI by jumping to [RETI] * to avoid clearing supervisor mode in child - */ + */ + r0 = [sp + PT_PC]; + [sp + PT_P0] = r0; + RESTORE_ALL_SYS - p0 = reti; jump (p0); ENDPROC(_ret_from_fork) diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S index d8b1ebc7099..90262691b11 100644 --- a/arch/blackfin/kernel/fixed_code.S +++ b/arch/blackfin/kernel/fixed_code.S @@ -129,4 +129,18 @@ ENTRY(_atomic_xor32) rts; ENDPROC (_atomic_ior32) +.align 16 + /* + * safe_user_instruction + * Four NOPS are enough to allow the pipeline to speculativily load + * execute anything it wants. After that, things have gone bad, and + * we are stuck - so panic. Since we might be in user space, we can't + * call panic, so just cause a unhandled exception, this should cause + * a dump of the trace buffer so we can tell were we are, and a reboot + */ +ENTRY(_safe_user_instruction) + NOP; NOP; NOP; NOP; + EXCPT 0x4; +ENDPROC(_safe_user_instruction) + ENTRY(_fixed_code_end) diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index cb7ba9bfc79..5cf4bdb1df3 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -20,8 +20,7 @@ #else # define tassert(expr) \ if (!(expr)) \ - printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", \ - __FILE__, __func__, __LINE__); + printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__); #endif #define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1) @@ -70,7 +69,7 @@ static volatile GPTIMER_group_regs *const group_regs[BFIN_TIMER_NUM_GROUP] = #endif }; -static uint32_t const dis_mask[MAX_BLACKFIN_GPTIMERS] = +static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] = { TIMER_STATUS_TRUN0, TIMER_STATUS_TRUN1, @@ -90,7 +89,27 @@ static uint32_t const dis_mask[MAX_BLACKFIN_GPTIMERS] = #endif }; -static uint32_t const irq_mask[MAX_BLACKFIN_GPTIMERS] = +static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] = +{ + TIMER_STATUS_TOVF0, + TIMER_STATUS_TOVF1, + TIMER_STATUS_TOVF2, +#if (MAX_BLACKFIN_GPTIMERS > 3) + TIMER_STATUS_TOVF3, + TIMER_STATUS_TOVF4, + TIMER_STATUS_TOVF5, + TIMER_STATUS_TOVF6, + TIMER_STATUS_TOVF7, +#endif +#if (MAX_BLACKFIN_GPTIMERS > 8) + TIMER_STATUS_TOVF8, + TIMER_STATUS_TOVF9, + TIMER_STATUS_TOVF10, + TIMER_STATUS_TOVF11, +#endif +}; + +static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] = { TIMER_STATUS_TIMIL0, TIMER_STATUS_TIMIL1, @@ -165,17 +184,31 @@ EXPORT_SYMBOL(set_gptimer_status); uint16_t get_gptimer_intr(int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & irq_mask[timer_id]) ? 1 : 0; + return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0; } EXPORT_SYMBOL(get_gptimer_intr); void clear_gptimer_intr(int timer_id) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); - group_regs[BFIN_TIMER_OCTET(timer_id)]->status = irq_mask[timer_id]; + group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id]; } EXPORT_SYMBOL(clear_gptimer_intr); +uint16_t get_gptimer_over(int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0; +} +EXPORT_SYMBOL(get_gptimer_over); + +void clear_gptimer_over(int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id]; +} +EXPORT_SYMBOL(clear_gptimer_over); + void set_gptimer_config(int timer_id, uint16_t config) { tassert(timer_id < MAX_BLACKFIN_GPTIMERS); @@ -214,7 +247,7 @@ void disable_gptimers(uint16_t mask) } for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) - group_regs[BFIN_TIMER_OCTET(i)]->status |= dis_mask[i]; + group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i]; SSYNC(); } EXPORT_SYMBOL(disable_gptimers); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index f1b059e5a06..934234f4383 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -316,6 +316,15 @@ void __init setup_arch(char **cmdline_p) init_leds(); + _bfin_swrst = bfin_read_SWRST(); + + if (_bfin_swrst & RESET_DOUBLE) + printk(KERN_INFO "Recovering from Double Fault event\n"); + else if (_bfin_swrst & RESET_WDOG) + printk(KERN_INFO "Recovering from Watchdog event\n"); + else if (_bfin_swrst & RESET_SOFTWARE) + printk(KERN_NOTICE "Reset caused by Software reset\n"); + printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); @@ -402,8 +411,6 @@ void __init setup_arch(char **cmdline_p) if (l1_length > L1_DATA_A_LENGTH) panic("L1 data memory overflow\n"); - _bfin_swrst = bfin_read_SWRST(); - /* Copy atomic sequences to their fixed location, and sanity check that these locations are the ones that we advertise to userspace. */ memcpy((void *)FIXED_CODE_START, &fixed_code_start, @@ -424,6 +431,8 @@ void __init setup_arch(char **cmdline_p) != ATOMIC_AND32 - FIXED_CODE_START); BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start != ATOMIC_XOR32 - FIXED_CODE_START); + BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start + != SAFE_USER_INSTRUCTION - FIXED_CODE_START); init_exception_vectors(); bf53x_cache_init(); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index afd044e78af..cfa05436c97 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -37,10 +37,24 @@ #include <asm/blackfin.h> #include <asm/irq_handler.h> #include <asm/trace.h> +#include <asm/fixed_code.h> #ifdef CONFIG_KGDB # include <linux/debugger.h> # include <linux/kgdb.h> + +# define CHK_DEBUGGER_TRAP() \ + do { \ + CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \ + } while (0) +# define CHK_DEBUGGER_TRAP_MAYBE() \ + do { \ + if (kgdb_connected) \ + CHK_DEBUGGER_TRAP(); \ + } while (0) +#else +# define CHK_DEBUGGER_TRAP() do { } while (0) +# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0) #endif /* Initiate the event table handler */ @@ -53,13 +67,13 @@ void __init trap_init(void) int kstack_depth_to_print = 48; -#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON -static int printk_address(unsigned long address) +static void decode_address(char *buf, unsigned long address) { struct vm_list_struct *vml; struct task_struct *p; struct mm_struct *mm; - unsigned long offset; + unsigned long flags, offset; + unsigned int in_exception = bfin_read_IPEND() & 0x10; #ifdef CONFIG_KALLSYMS unsigned long symsize; @@ -75,20 +89,33 @@ static int printk_address(unsigned long address) /* yeah! kernel space! */ if (!modname) modname = delim = ""; - return printk("<0x%p> { %s%s%s%s + 0x%lx }", + sprintf(buf, "<0x%p> { %s%s%s%s + 0x%lx }", (void *)address, delim, modname, delim, symname, (unsigned long)offset); + return; } #endif + /* Problem in fixed code section? */ + if (address >= FIXED_CODE_START && address < FIXED_CODE_END) { + sprintf(buf, "<0x%p> /* Maybe fixed code section */", (void *)address); + return; + } + + /* Problem somewhere before the kernel start address */ + if (address < CONFIG_BOOT_LOAD) { + sprintf(buf, "<0x%p> /* Maybe null pointer? */", (void *)address); + return; + } + /* looks like we're off in user-land, so let's walk all the * mappings of all our processes and see if we can't be a whee * bit more specific */ - write_lock_irq(&tasklist_lock); + write_lock_irqsave(&tasklist_lock, flags); for_each_process(p) { - mm = get_task_mm(p); + mm = (in_exception ? p->mm : get_task_mm(p)); if (!mm) continue; @@ -117,25 +144,30 @@ static int printk_address(unsigned long address) else offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); - write_unlock_irq(&tasklist_lock); - mmput(mm); - return printk("<0x%p> [ %s + 0x%lx ]", - (void *)address, name, offset); + sprintf(buf, "<0x%p> [ %s + 0x%lx ]", + (void *)address, name, offset); + if (!in_exception) + mmput(mm); + goto done; } vml = vml->next; } - mmput(mm); + if (!in_exception) + mmput(mm); } - write_unlock_irq(&tasklist_lock); /* we were unable to find this address anywhere */ - return printk("[<0x%p>]", (void *)address); + sprintf(buf, "[<0x%p>]", (void *)address); + +done: + write_unlock_irqrestore(&tasklist_lock, flags); } -#endif asmlinkage void double_fault_c(struct pt_regs *fp) { + console_verbose(); + oops_in_progress = 1; printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); dump_bfin_regs(fp, (void *)fp->retx); panic("Double Fault - unrecoverable event\n"); @@ -151,22 +183,29 @@ asmlinkage void trap_c(struct pt_regs *fp) siginfo_t info; unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; + trace_buffer_save(j); + + /* Important - be very careful dereferncing pointers - will lead to + * double faults if the stack has become corrupt + */ + + /* If the fault was caused by a kernel thread, or interrupt handler + * we will kernel panic, so the system reboots. + * If KGDB is enabled, don't set this for kernel breakpoints + */ + if ((bfin_read_IPEND() & 0xFFC0) #ifdef CONFIG_KGDB -# define CHK_DEBUGGER_TRAP() \ - do { \ - CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \ - } while (0) -# define CHK_DEBUGGER_TRAP_MAYBE() \ - do { \ - if (kgdb_connected) \ - CHK_DEBUGGER_TRAP(); \ - } while (0) -#else -# define CHK_DEBUGGER_TRAP() do { } while (0) -# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0) + && trapnr != VEC_EXCPT02 #endif - - trace_buffer_save(j); + ){ + console_verbose(); + oops_in_progress = 1; + } else if (current) { + if (current->mm == NULL) { + console_verbose(); + oops_in_progress = 1; + } + } /* trap_c() will be called for exceptions. During exceptions * processing, the pc value should be set with retx value. @@ -211,7 +250,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_EXCPT03: info.si_code = SEGV_STACKFLOW; sig = SIGSEGV; - printk(KERN_EMERG EXC_0x03); + printk(KERN_NOTICE EXC_0x03); CHK_DEBUGGER_TRAP(); break; /* 0x04 - User Defined, Caught by default */ @@ -240,7 +279,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_OVFLOW: info.si_code = TRAP_TRACEFLOW; sig = SIGTRAP; - printk(KERN_EMERG EXC_0x11); + printk(KERN_NOTICE EXC_0x11); CHK_DEBUGGER_TRAP(); break; /* 0x12 - Reserved, Caught by default */ @@ -262,14 +301,14 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_UNDEF_I: info.si_code = ILL_ILLOPC; sig = SIGILL; - printk(KERN_EMERG EXC_0x21); + printk(KERN_NOTICE EXC_0x21); CHK_DEBUGGER_TRAP(); break; /* 0x22 - Illegal Instruction Combination, handled here */ case VEC_ILGAL_I: info.si_code = ILL_ILLPARAOP; sig = SIGILL; - printk(KERN_EMERG EXC_0x22); + printk(KERN_NOTICE EXC_0x22); CHK_DEBUGGER_TRAP(); break; /* 0x23 - Data CPLB Protection Violation, @@ -277,21 +316,21 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_CPLB_VL: info.si_code = ILL_CPLB_VI; sig = SIGILL; - printk(KERN_EMERG EXC_0x23); + printk(KERN_NOTICE EXC_0x23); CHK_DEBUGGER_TRAP(); break; /* 0x24 - Data access misaligned, handled here */ case VEC_MISALI_D: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_EMERG EXC_0x24); + printk(KERN_NOTICE EXC_0x24); CHK_DEBUGGER_TRAP(); break; /* 0x25 - Unrecoverable Event, handled here */ case VEC_UNCOV: info.si_code = ILL_ILLEXCPT; sig = SIGILL; - printk(KERN_EMERG EXC_0x25); + printk(KERN_NOTICE EXC_0x25); CHK_DEBUGGER_TRAP(); break; /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr, @@ -299,7 +338,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_CPLB_M: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_EMERG EXC_0x26); + printk(KERN_NOTICE EXC_0x26); CHK_DEBUGGER_TRAP(); break; /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ @@ -307,11 +346,10 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO sig = SIGSEGV; - printk(KERN_EMERG "\n" - KERN_EMERG "NULL pointer access (probably)\n"); + printk(KERN_NOTICE "NULL pointer access (probably)\n"); #else sig = SIGILL; - printk(KERN_EMERG EXC_0x27); + printk(KERN_NOTICE EXC_0x27); #endif CHK_DEBUGGER_TRAP(); break; @@ -331,7 +369,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */ info.si_code = BUS_OPFETCH; sig = SIGBUS; - printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n"); + printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n"); CHK_DEBUGGER_TRAP(); break; #else @@ -341,7 +379,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_MISALI_I: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_EMERG EXC_0x2A); + printk(KERN_NOTICE EXC_0x2A); CHK_DEBUGGER_TRAP(); break; /* 0x2B - Instruction CPLB protection Violation, @@ -349,14 +387,14 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_CPLB_I_VL: info.si_code = ILL_CPLB_VI; sig = SIGILL; - printk(KERN_EMERG EXC_0x2B); + printk(KERN_NOTICE EXC_0x2B); CHK_DEBUGGER_TRAP(); break; /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */ case VEC_CPLB_I_M: info.si_code = ILL_CPLB_MISS; sig = SIGBUS; - printk(KERN_EMERG EXC_0x2C); + printk(KERN_NOTICE EXC_0x2C); CHK_DEBUGGER_TRAP(); break; /* 0x2D - Instruction CPLB Multiple Hits, handled here */ @@ -364,10 +402,10 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO sig = SIGSEGV; - printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n"); + printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n"); #else sig = SIGILL; - printk(KERN_EMERG EXC_0x2D); + printk(KERN_NOTICE EXC_0x2D); #endif CHK_DEBUGGER_TRAP(); break; @@ -375,7 +413,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_ILL_RES: info.si_code = ILL_PRVOPC; sig = SIGILL; - printk(KERN_EMERG EXC_0x2E); + printk(KERN_NOTICE EXC_0x2E); CHK_DEBUGGER_TRAP(); break; /* 0x2F - Reserved, Caught by default */ @@ -404,38 +442,40 @@ asmlinkage void trap_c(struct pt_regs *fp) break; } - if (sig != 0 && sig != SIGTRAP) { + BUG_ON(sig == 0); + + if (sig != SIGTRAP) { unsigned long stack; dump_bfin_regs(fp, (void *)fp->retx); - dump_bfin_trace_buffer(); + + /* Print out the trace buffer if it makes sense */ +#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE + if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M) + printk(KERN_NOTICE "No trace since you do not have " + "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n" + KERN_NOTICE "\n"); + else +#endif + dump_bfin_trace_buffer(); show_stack(current, &stack); - if (current->mm == NULL) + if (oops_in_progress) { +#ifndef CONFIG_ACCESS_CHECK + printk(KERN_EMERG "Hey - dork - please turn on " + "CONFIG_ACCESS_CHECK\n"); +#endif panic("Kernel exception"); + } + + /* Ensure that bad return addresses don't end up in an infinite + * loop, due to speculative loads/reads + */ + fp->pc = SAFE_USER_INSTRUCTION; } info.si_signo = sig; info.si_errno = 0; info.si_addr = (void *)fp->pc; force_sig_info(sig, &info, current); - /* if the address that we are about to return to is not valid, set it - * to a valid address, if we have a current application or panic - */ - if (!(fp->pc <= physical_mem_end -#if L1_CODE_LENGTH != 0 - || (fp->pc >= L1_CODE_START && - fp->pc <= (L1_CODE_START + L1_CODE_LENGTH)) -#endif - )) { - if (current->mm) { - fp->pc = current->mm->start_code; - } else { - printk(KERN_EMERG - "I can't return to memory that doesn't exist" - " - bad things happen\n"); - panic("Help - I've fallen and can't get up\n"); - } - } - trace_buffer_restore(j); return; } @@ -448,21 +488,21 @@ void dump_bfin_trace_buffer(void) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags, i = 0; + char buf[150]; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND int j, index; #endif trace_buffer_save(tflags); - printk(KERN_EMERG "Hardware Trace:\n"); + printk(KERN_NOTICE "Hardware Trace:\n"); if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { - printk(KERN_EMERG "%4i Target : ", i); - printk_address((unsigned long)bfin_read_TBUF()); - printk("\n" KERN_EMERG " Source : "); - printk_address((unsigned long)bfin_read_TBUF()); - printk("\n"); + decode_address(buf, (unsigned long)bfin_read_TBUF()); + printk(KERN_NOTICE "%4i Target : %s\n", i, buf); + decode_address(buf, (unsigned long)bfin_read_TBUF()); + printk(KERN_NOTICE " Source : %s\n", buf); } } @@ -474,17 +514,16 @@ void dump_bfin_trace_buffer(void) j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; while (j) { - printk(KERN_EMERG "%4i Target : ", i); - printk_address(software_trace_buff[index]); + decode_address(buf, software_trace_buff[index]); + printk(KERN_NOTICE "%4i Target : %s\n", i, buf); index -= 1; if (index < 0 ) index = EXPAND_LEN; - printk("\n" KERN_EMERG " Source : "); - printk_address(software_trace_buff[index]); + decode_address(buf, software_trace_buff[index]); + printk(KERN_NOTICE " Source : %s\n", buf); index -= 1; if (index < 0) index = EXPAND_LEN; - printk("\n"); j--; i++; } @@ -499,10 +538,7 @@ static void show_trace(struct task_struct *tsk, unsigned long *sp) { unsigned long addr; - printk("\nCall Trace:"); -#ifdef CONFIG_KALLSYMS - printk("\n"); -#endif + printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n"); while (!kstack_end(sp)) { addr = *sp++; @@ -518,7 +554,7 @@ static void show_trace(struct task_struct *tsk, unsigned long *sp) print_ip_sym(addr); } - printk("\n"); + printk(KERN_NOTICE "\n"); } void show_stack(struct task_struct *task, unsigned long *stack) @@ -540,14 +576,15 @@ void show_stack(struct task_struct *task, unsigned long *stack) addr = (unsigned long)stack; endstack = (unsigned long *)PAGE_ALIGN(addr); - printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); + printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack); for (i = 0; i < kstack_depth_to_print; i++) { if (stack + 1 > endstack) break; if (i % 8 == 0) - printk("\n" KERN_EMERG " "); + printk("\n" KERN_NOTICE " "); printk(" %08lx", *stack++); } + printk("\n"); show_trace(task, stack); } @@ -568,33 +605,34 @@ EXPORT_SYMBOL(dump_stack); void dump_bfin_regs(struct pt_regs *fp, void *retaddr) { - if (current->pid) { - printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" - KERN_EMERG "\n"); - printk(KERN_EMERG "COMM=%s PID=%d\n", - current->comm, current->pid); + char buf [150]; + + if (!oops_in_progress) { + if (current->pid && current->mm) { + printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n"); + printk(KERN_NOTICE "COMM=%s PID=%d\n", + current->comm, current->pid); + + printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" + KERN_NOTICE "\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + } else { + printk (KERN_NOTICE "\n" KERN_NOTICE + "No Valid pid - Either things are really messed up," + " or you are in the kernel\n"); + } } else { - printk - (KERN_EMERG "\n" KERN_EMERG - "No Valid pid - Either things are really messed up," - " or you are in the kernel\n"); - } - - if (current->mm) { - printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_EMERG "\n", - (void *)current->mm->start_code, - (void *)current->mm->end_code, - (void *)current->mm->start_data, - (void *)current->mm->end_data, - (void *)current->mm->end_data, - (void *)current->mm->brk, - (void *)current->mm->start_stack); + printk(KERN_NOTICE "Kernel or interrupt exception\n"); } - printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr); - if (retaddr != 0 && retaddr <= (void *)physical_mem_end + if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end #if L1_CODE_LENGTH != 0 /* FIXME: Copy the code out of L1 Instruction SRAM through dma memcpy. */ @@ -604,18 +642,20 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) ) { int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32; unsigned short x = 0; + printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr); for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { if (!(i & 0xF)) - printk("\n" KERN_EMERG "0x%08x: ", i); + printk("\n" KERN_NOTICE "0x%08x: ", i); if (get_user(x, (unsigned short *)i)) break; #ifndef CONFIG_DEBUG_HWERR /* If one of the last few instructions was a STI * it is likely that the error occured awhile ago - * and we just noticed + * and we just noticed. This only happens in kernel + * context, which should mean an oops is happening */ - if (x >= 0x0040 && x <= 0x0047 && i <= 0) + if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0) panic("\n\nWARNING : You should reconfigure" " the kernel to turn on\n" " 'Hardware error interrupt" @@ -628,56 +668,60 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) else printk(" %04x ", x); } - printk("\n" KERN_EMERG "\n"); + printk("\n"); } else - printk(KERN_EMERG + printk("\n" KERN_NOTICE "Cannot look at the [PC] for it is" - "in unreadable L1 SRAM - sorry\n"); + " in unreadable memory - sorry\n"); + + printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); + printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", + (long)fp->seqstat, fp->ipend, fp->syscfg); + decode_address(buf, fp->rete); + printk(KERN_NOTICE " RETE: %s\n", buf); + decode_address(buf, fp->retn); + printk(KERN_NOTICE " RETN: %s\n", buf); + decode_address(buf, fp->retx); + printk(KERN_NOTICE " RETX: %s\n", buf); + decode_address(buf, fp->rets); + printk(KERN_NOTICE " RETS: %s\n", buf); - printk(KERN_EMERG - "RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", - fp->rete, fp->retn, fp->retx, fp->rets); - printk(KERN_EMERG "IPEND: %04lx SYSCFG: %04lx\n", - fp->ipend, fp->syscfg); - printk(KERN_EMERG "SEQSTAT: %08lx SP: %08lx\n", - (long)fp->seqstat, (long)fp); - printk(KERN_EMERG "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { + decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); + printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); + decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); + printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); + } + + printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n"); + printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", fp->r0, fp->r1, fp->r2, fp->r3); - printk(KERN_EMERG "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", fp->r4, fp->r5, fp->r6, fp->r7); - printk(KERN_EMERG "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", fp->p0, fp->p1, fp->p2, fp->p3); - printk(KERN_EMERG - "P4: %08lx P5: %08lx FP: %08lx\n", - fp->p4, fp->p5, fp->fp); - printk(KERN_EMERG - "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - - printk(KERN_EMERG "LB0: %08lx LT0: %08lx LC0: %08lx\n", + printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", + fp->p4, fp->p5, fp->fp, (long)fp); + printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0, fp->lc0); - printk(KERN_EMERG "LB1: %08lx LT1: %08lx LC1: %08lx\n", + printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1, fp->lc1); - printk(KERN_EMERG "B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", + printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", fp->b0, fp->l0, fp->m0, fp->i0); - printk(KERN_EMERG "B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", + printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", fp->b1, fp->l1, fp->m1, fp->i1); - printk(KERN_EMERG "B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", + printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", fp->b2, fp->l2, fp->m2, fp->i2); - printk(KERN_EMERG "B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", + printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", fp->b3, fp->l3, fp->m3, fp->i3); + printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); - printk(KERN_EMERG "\n" KERN_EMERG "USP: %08lx ASTAT: %08lx\n", + printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n", rdusp(), fp->astat); - if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", - (void *)bfin_read_DCPLB_FAULT_ADDR()); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", - (void *)bfin_read_ICPLB_FAULT_ADDR()); - } - printk("\n\n"); + printk(KERN_NOTICE "\n"); } #ifdef CONFIG_SYS_BFIN_SPINLOCK_L1 @@ -752,6 +796,8 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) break; } + oops_in_progress = 1; + printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); dump_bfin_regs(fp, (void *)fp->retx); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index eec43674a46..9b75bc83c71 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -172,9 +172,14 @@ SECTIONS __ebss_b_l1 = .; } - ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); - - .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) : + /* Force trailing alignment of our init section so that when we + * free our init memory, we don't leave behind a partial page. + */ + . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); + . = ALIGN(PAGE_SIZE); + ___init_end = .; + + .bss : { . = ALIGN(4); ___bss_start = .; diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 3e884f3a818..bf1bedcc886 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -41,9 +41,11 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb_sl811.h> +#include <asm/cplb.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> +#include <asm/nand.h> #include <linux/spi/ad7877.h> /* @@ -102,6 +104,53 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = 4 * SIZE_1M, + .size = (256 - 4) * SIZE_1M, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = NFC_CTL, + .end = NFC_DATA_RD + 2, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -650,6 +699,10 @@ static struct platform_device bfin_pata_device = { #endif static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, #endif diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c new file mode 100644 index 00000000000..b941550f956 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -0,0 +1,345 @@ +/* + * File: arch/blackfin/mach-bf533/H8606.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Javier Herrero <jherrero@hvsistemas.es> + * + * Created: 2007 + * Description: Board Info File for the HV Sistemas H8606 board + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc + * Copyright 2007 HV Sistemas S.L. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb_isp1362.h> +#endif +#include <linux/pata_platform.h> +#include <linux/irq.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "HV Sistemas H8606"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* +* Driver needs to know address, irq and flag pin. + */ + #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x20300000, + .end = 0x20300000 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF10, + .end = IRQ_PF10, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .id = 0, + .name = "dm9000", + .resource = dm9000_resources, + .num_resources = ARRAY_SIZE(dm9000_resources), +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, { + /* + * denotes the flag pin and is used directly if + * CONFIG_IRQCHIP_DEMUX_GPIO is defined. + */ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF10, + .end = IRQ_PF10, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00060000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "kernel", + .size = 0x100000, + .offset = 0x60000 + }, { + .name = "file system", + .size = 0x6a0000, + .offset = 0x00160000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .ctl_reg = 0x1000, + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .ctl_reg = 0x1000, + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x1c04, + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +/* Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate */ +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + /* this value is the baudrate divisor */ + .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 16, + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif + +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 4, + .bus_num = 1, + .chip_select = 3, + .controller_data = &spi_si3xxx_chip_info, + }, + + { + .modalias = "fxo-spi", + .max_speed_hz = 4, + .bus_num = 1, + .chip_select = 2, + .controller_data = &spi_si3xxx_chip_info, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +static struct platform_device bfin_fb_device = { + .name = "bf537-fb", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +}; + +static int __init H8606_init(void) +{ + printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(H8606_init);
\ No newline at end of file diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 12a631ab389..2452b456ccb 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o +obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 1c5a86adfab..a863522a446 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -46,7 +46,7 @@ const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ - +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", @@ -76,12 +76,15 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, }; +#endif /* SPI ADC chip */ +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16, }; +#endif #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { @@ -90,7 +93,15 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -100,7 +111,11 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, - }, { + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ @@ -108,6 +123,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, }, +#endif + #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) { .modalias = "ad1836-spi", @@ -117,6 +134,27 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad1836_spi_chip_info, }, #endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif }; /* SPI (0) */ diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index f84be4eabfd..62ffa500420 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -218,7 +218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 0, .platform_data = NULL, @@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, { .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 52e2320307d..2915931045e 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -281,8 +281,8 @@ static struct resource net2272_bfin_resources[] = { .end = 0x20200000 + 0x100, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PF7, - .end = IRQ_PF7, + .start = IRQ_PH14, + .end = IRQ_PH14, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index cc41f6c2ef4..5f7b91fbafe 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -450,7 +450,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 0, .platform_data = NULL, @@ -459,7 +459,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, { .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, @@ -612,7 +612,7 @@ static struct platform_device bfin_sport1_uart_device = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, + .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED, }; static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index e3ad5802868..1b13fa47097 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -917,7 +917,7 @@ ENTRY(_ex_table) .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ .long _ex_replaceable /* 0x02 - User Defined */ .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ - .long _ex_replaceable /* 0x04 - User Defined */ + .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */ .long _ex_replaceable /* 0x05 - User Defined */ .long _ex_replaceable /* 0x06 - User Defined */ .long _ex_replaceable /* 0x07 - User Defined */ diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index e2e9f57abe2..ff6a8712bd6 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -1,6 +1,6 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. # mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration" diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 75fd90dc76a..7f6b2377d13 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc6 -# Tue Sep 18 11:24:01 2007 +# Linux kernel version: 2.6.23 +# Thu Oct 18 16:03:40 2007 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -28,6 +28,8 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_CGROUPS=y CONFIG_CPUSETS=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y @@ -48,7 +50,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -69,6 +70,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -93,6 +95,7 @@ CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -113,10 +116,10 @@ CONFIG_IA64_SGI_SN2=y CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_4KB is not set # CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set -# CONFIG_PGTABLE_3 is not set -CONFIG_PGTABLE_4=y +# CONFIG_IA64_PAGE_SIZE_16KB is not set +CONFIG_IA64_PAGE_SIZE_64KB=y +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set @@ -131,6 +134,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=1024 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_SCHED_SMT=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -144,6 +148,7 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y @@ -171,6 +176,7 @@ CONFIG_IA64_PALINFO=y CONFIG_IA64_MC_ERR_INJECT=y CONFIG_SGI_SN=y # CONFIG_IA64_ESI is not set +# CONFIG_IA64_HP_AML_NFW is not set # # SN Devices @@ -220,7 +226,6 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y -# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -231,10 +236,6 @@ CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_SGI=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -271,6 +272,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set @@ -342,6 +344,7 @@ CONFIG_IPV6_SIT=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -402,7 +405,12 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEPNP is not set + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y @@ -410,8 +418,6 @@ CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -439,7 +445,6 @@ CONFIG_BLK_DEV_SGIIOC4=y # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set # CONFIG_BLK_DEV_HD is not set # @@ -482,6 +487,7 @@ CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y # CONFIG_SCSI_SAS_ATA is not set # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set @@ -492,6 +498,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -532,6 +539,7 @@ CONFIG_ATA_ACPI=y # CONFIG_SATA_VIA is not set CONFIG_SATA_VITESSE=y # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -556,6 +564,7 @@ CONFIG_SATA_VITESSE=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -588,10 +597,6 @@ CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y @@ -613,13 +618,16 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -638,12 +646,15 @@ CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y # CONFIG_CHELSIO_T1_NAPI is not set CONFIG_CHELSIO_T3=m +CONFIG_IXGBE=m # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -669,6 +680,7 @@ CONFIG_S2IO=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -690,7 +702,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -714,6 +725,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +# CONFIG_VT_UNICODE is not set CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -760,9 +772,6 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_EFI_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_SGI_TIOCA=y -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 # CONFIG_HPET is not set @@ -782,6 +791,12 @@ CONFIG_DEVPORT=y # CONFIG_HWMON is not set # +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# # Multifunction device drivers # # CONFIG_MFD_SM501 is not set @@ -796,15 +811,18 @@ CONFIG_DEVPORT=y # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_SGI_TIOCA=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set # # Console display driver support @@ -820,6 +838,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -951,19 +970,6 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# # Userspace I/O # # CONFIG_UIO is not set @@ -1005,6 +1011,8 @@ CONFIG_XFS_RT=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -1043,7 +1051,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1062,10 +1069,7 @@ CONFIG_RAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1082,6 +1086,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_XPRT_RDMA=m # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1118,10 +1123,6 @@ CONFIG_SGI_PARTITION=y # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1162,10 +1163,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # @@ -1223,6 +1220,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set CONFIG_IA64_GRANULE_16MB=y @@ -1238,6 +1236,7 @@ CONFIG_SYSVIPC_COMPAT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1262,6 +1261,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set @@ -1275,9 +1275,11 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 3f7ea13358e..6216eba2e38 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -1231,7 +1231,7 @@ kdump_find_rsvd_region (unsigned long size, #ifdef CONFIG_PROC_VMCORE /* locate the size find a the descriptor at a certain address */ -unsigned long +unsigned long __init vmcore_find_descriptor_size (unsigned long address) { void *efi_map_start, *efi_map_end, *p; diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S index 44817d97ab4..454d7a7dfa9 100644 --- a/arch/ia64/kernel/gate.lds.S +++ b/arch/ia64/kernel/gate.lds.S @@ -20,6 +20,8 @@ SECTIONS .gnu.version_d : { *(.gnu.version_d) } .gnu.version_r : { *(.gnu.version_r) } + .note : { *(.note*) } :readable :note + .dynamic : { *(.dynamic) } :readable :dynamic /* @@ -83,6 +85,7 @@ PHDRS epc PT_LOAD FILEHDR PHDRS FLAGS(1); /* PF_X */ #endif dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ + note PT_NOTE FLAGS(4); /* PF_R */ unwind PT_IA_64_UNWIND; } diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 2fdbd5c3f21..e86d0295979 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -109,7 +109,7 @@ int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) write_msi_msg(irq, &msg); set_irq_chip_and_handler(irq, &ia64_msi_chip, handle_edge_irq); - return irq; + return 0; } void ia64_teardown_msi_irq(unsigned int irq) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index ae6c3c02e11..2b3751eef5c 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -417,34 +417,6 @@ mark_bsp_online (void) #endif } -#ifdef CONFIG_SMP -static void __init -check_for_logical_procs (void) -{ - pal_logical_to_physical_t info; - s64 status; - - status = ia64_pal_logical_to_phys(0, &info); - if (status == -1) { - printk(KERN_INFO "No logical to physical processor mapping " - "available\n"); - return; - } - if (status) { - printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n", - status); - return; - } - /* - * Total number of siblings that BSP has. Though not all of them - * may have booted successfully. The correct number of siblings - * booted is in info.overview_num_log. - */ - smp_num_siblings = info.overview_tpc; - smp_num_cpucores = info.overview_cpp; -} -#endif - static __initdata int nomca; static __init int setup_nomca(char *s) { @@ -540,15 +512,6 @@ setup_arch (char **cmdline_p) #ifdef CONFIG_SMP cpu_physical_id(0) = hard_smp_processor_id(); - check_for_logical_procs(); - if (smp_num_cpucores > 1) - printk(KERN_INFO - "cpu package is Multi-Core capable: number of cores=%d\n", - smp_num_cpucores); - if (smp_num_siblings > 1) - printk(KERN_INFO - "cpu package is Multi-Threading capable: number of siblings=%d\n", - smp_num_siblings); #endif cpu_init(); /* initialize the bootstrap CPU */ @@ -661,12 +624,13 @@ show_cpuinfo (struct seq_file *m, void *v) lpj*HZ/500000, (lpj*HZ/5000) % 100); #ifdef CONFIG_SMP seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum])); + if (c->socket_id != -1) + seq_printf(m, "physical id: %u\n", c->socket_id); if (c->threads_per_core > 1 || c->cores_per_socket > 1) seq_printf(m, - "physical id: %u\n" - "core id : %u\n" - "thread id : %u\n", - c->socket_id, c->core_id, c->thread_id); + "core id : %u\n" + "thread id : %u\n", + c->core_id, c->thread_id); #endif seq_printf(m,"\n"); @@ -778,6 +742,9 @@ identify_cpu (struct cpuinfo_ia64 *c) c->socket_id = -1; identify_siblings(c); + + if (c->threads_per_core > smp_num_siblings) + smp_num_siblings = c->threads_per_core; #endif c->ppn = cpuid.field.ppn; c->number = cpuid.field.number; diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index c57dbce25c1..f0fc4d8465a 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -142,7 +142,6 @@ DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map); EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); int smp_num_siblings = 1; -int smp_num_cpucores = 1; /* which logical CPU number maps to which CPU (physical APIC ID) */ volatile int ia64_cpu_to_sapicid[NR_CPUS]; @@ -886,13 +885,17 @@ identify_siblings(struct cpuinfo_ia64 *c) u16 pltid; pal_logical_to_physical_t info; - if (smp_num_cpucores == 1 && smp_num_siblings == 1) - return; - if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) { - printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n", - status); - return; + if (status != PAL_STATUS_UNIMPLEMENTED) { + printk(KERN_ERR + "ia64_pal_logical_to_phys failed with %ld\n", + status); + return; + } + + info.overview_ppid = 0; + info.overview_cpp = 1; + info.overview_tpc = 1; } if ((status = ia64_sal_physical_id_info(&pltid)) != PAL_STATUS_SUCCESS) { printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status); @@ -900,6 +903,10 @@ identify_siblings(struct cpuinfo_ia64 *c) } c->socket_id = (pltid << 8) | info.overview_ppid; + + if (info.overview_cpp == 1 && info.overview_tpc == 1) + return; + c->cores_per_socket = info.overview_cpp; c->threads_per_core = info.overview_tpc; c->num_log = info.overview_num_log; diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index c6c19bf11be..25aef6211a5 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -472,7 +472,7 @@ struct memmap_init_callback_data { unsigned long zone; }; -static int +static int __meminit virtual_memmap_init (u64 start, u64 end, void *arg) { struct memmap_init_callback_data *args; @@ -503,7 +503,7 @@ virtual_memmap_init (u64 start, u64 end, void *arg) return 0; } -void +void __meminit memmap_init (unsigned long size, int nid, unsigned long zone, unsigned long start_pfn) { diff --git a/arch/ia64/scripts/check-segrel.lds b/arch/ia64/scripts/check-segrel.lds index 1c2f13e181d..85a0d54fb5a 100644 --- a/arch/ia64/scripts/check-segrel.lds +++ b/arch/ia64/scripts/check-segrel.lds @@ -1,6 +1,7 @@ SECTIONS { . = SIZEOF_HEADERS; .rodata : { *(.rodata) } :ro + .note : { *(.note*) } . = 0xa0000; .data : { *(.data) } :dat /DISCARD/ : { *(*) } diff --git a/arch/ia64/sn/kernel/mca.c b/arch/ia64/sn/kernel/mca.c index 3db62f24596..868c9aa64fe 100644 --- a/arch/ia64/sn/kernel/mca.c +++ b/arch/ia64/sn/kernel/mca.c @@ -98,6 +98,7 @@ sn_platform_plat_specific_err_print(const u8 * sect_header, u8 ** oemdata, while (*sn_oemdata_size > sn_oemdata_bufsize) { u8 *newbuf = vmalloc(*sn_oemdata_size); if (!newbuf) { + mutex_unlock(&sn_oemdata_mutex); printk(KERN_ERR "%s: unable to extend sn_oemdata\n", __FUNCTION__); return 1; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 97da953eb5d..2c7d6c240b7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -546,6 +546,7 @@ config SIBYTE_BIGSUR select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN config SNI_RM @@ -733,15 +734,27 @@ config ARCH_MAY_HAVE_PC_FDC config BOOT_RAW bool +config CEVT_BCM1480 + bool + config CEVT_GT641XX bool config CEVT_R4K bool +config CEVT_SB1250 + bool + config CEVT_TXX9 bool +config CSRC_BCM1480 + bool + +config CSRC_SB1250 + bool + config CFE bool diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile index afa7007d67f..85a90941de4 100644 --- a/arch/mips/au1000/mtx-1/Makefile +++ b/arch/mips/au1000/mtx-1/Makefile @@ -9,3 +9,5 @@ lib-y := init.o board_setup.o irqmap.o obj-y := platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c index 01ebff67797..49c0fb409fe 100644 --- a/arch/mips/au1000/mtx-1/platform.c +++ b/arch/mips/au1000/mtx-1/platform.c @@ -34,15 +34,6 @@ static struct resource mtx1_wdt_res[] = { } }; -static struct resource mtx1_sys_btn[] = { - [0] = { - .start = 7, - .end = 7, - .name = "mtx1-sys-btn-gpio", - .flags = IORESOURCE_IRQ, - } -}; - static struct platform_device mtx1_wdt = { .name = "mtx1-wdt", .id = 0, diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile index 22b673cf55a..970b1b1d5cd 100644 --- a/arch/mips/au1000/pb1200/Makefile +++ b/arch/mips/au1000/pb1200/Makefile @@ -3,3 +3,5 @@ # lib-y := init.o board_setup.o irqmap.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c index 5dbc9868f59..b98bebfa87c 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -68,9 +68,11 @@ void board_reset(void) void __init board_setup(void) { char *argptr = NULL; - u32 pin_func; #if 0 + { + u32 pin_func; + /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, * but it is board specific code, so put it here. */ @@ -81,11 +83,13 @@ void __init board_setup(void) au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ au_sync(); + } #endif #if defined(CONFIG_I2C_AU1550) { u32 freq0, clksrc; + u32 pin_func; /* Select SMBUS in CPLD */ bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c index bdf00e2a35e..c096be4ed4e 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -94,51 +94,41 @@ inline void pb1200_disable_irq(unsigned int irq_nr) bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN); } -static unsigned int pb1200_startup_irq( unsigned int irq_nr ) +static unsigned int pb1200_setup_cascade(void) { - if (++pb1200_cascade_en == 1) - { - request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, - 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler ); -#ifdef CONFIG_MIPS_PB1200 - /* We have a problem with CPLD rev3. Enable a workaround */ - if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3) - { - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); - printk("updated to latest revision. This software will not\n"); - printk("work on anything less than CPLD rev4\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - while(1); - } -#endif - } - pb1200_enable_irq(irq_nr); + int err; + + err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler); + if (err) + return err; + return 0; } -static void pb1200_shutdown_irq( unsigned int irq_nr ) +static unsigned int pb1200_startup_irq(unsigned int irq) { - pb1200_disable_irq(irq_nr); - if (--pb1200_cascade_en == 0) - { - free_irq(AU1000_GPIO_7, &pb1200_cascade_handler ); + if (++pb1200_cascade_en == 1) { + int res; + + res = pb1200_setup_cascade(); + if (res) + return res; } - return; + + pb1200_enable_irq(irq); + + return 0; } -static struct irq_chip external_irq_type = +static void pb1200_shutdown_irq(unsigned int irq) { + pb1200_disable_irq(irq); + if (--pb1200_cascade_en == 0) + free_irq(AU1000_GPIO_7, &pb1200_cascade_handler); +} + +static struct irq_chip external_irq_type = { #ifdef CONFIG_MIPS_PB1200 .name = "Pb1200 Ext", #endif @@ -155,16 +145,38 @@ static struct irq_chip external_irq_type = void _board_init_irq(void) { - int irq_nr; + unsigned int irq; - for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++) - { - set_irq_chip_and_handler(irq_nr, &external_irq_type, +#ifdef CONFIG_MIPS_PB1200 + /* We have a problem with CPLD rev3. Enable a workaround */ + if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); + printk("updated to latest revision. This software will not\n"); + printk("work on anything less than CPLD rev4\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + panic("Game over. Your score is 0."); + } +#endif + + for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) { + set_irq_chip_and_handler(irq, &external_irq_type, handle_level_irq); - pb1200_disable_irq(irq_nr); + pb1200_disable_irq(irq); } - /* GPIO_7 can not be hooked here, so it is hooked upon first - request of any source attached to the cascade */ + /* + * GPIO_7 can not be hooked here, so it is hooked upon first + * request of any source attached to the cascade + */ } - diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index 24378b9223f..6dd8f0d46d0 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -77,7 +77,7 @@ int titan_irqflags; void __init plat_time_init(void) { const u32 modebit5 = ocd_readl(0x00e4); - unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2, + unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2; unsigned int div = ((modebit5 >> 16) & 0x1f) + 2; if (div == 33) diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index ae25b480723..d7f8a782aae 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -97,9 +97,10 @@ asmlinkage void plat_irq_dispatch(void) if (pending & IE_IRQ4) { r4030_read_reg32(JAZZ_TIMER_REGISTER); do_IRQ(JAZZ_TIMER_IRQ); - } else if (pending & IE_IRQ2) - do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK)); - else if (pending & IE_IRQ1) { + } else if (pending & IE_IRQ2) { + irq = *(volatile u8 *)JAZZ_EISA_IRQ_ACK; + do_IRQ(irq); + } else if (pending & IE_IRQ1) { irq = *(volatile u8 *)JAZZ_IO_IRQ_SOURCE >> 2; if (likely(irq > 0)) do_IRQ(irq + JAZZ_IRQ_START - 1); @@ -117,16 +118,16 @@ static void r4030_set_mode(enum clock_event_mode mode, struct clock_event_device r4030_clockevent = { .name = "r4030", .features = CLOCK_EVT_FEAT_PERIODIC, - .rating = 100, + .rating = 300, .irq = JAZZ_TIMER_IRQ, - .cpumask = CPU_MASK_CPU0, .set_mode = r4030_set_mode, }; static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id) { - r4030_clockevent.event_handler(&r4030_clockevent); + struct clock_event_device *cd = dev_id; + cd->event_handler(cd); return IRQ_HANDLED; } @@ -134,15 +135,22 @@ static struct irqaction r4030_timer_irqaction = { .handler = r4030_timer_interrupt, .flags = IRQF_DISABLED, .mask = CPU_MASK_CPU0, - .name = "timer", + .name = "R4030 timer", }; void __init plat_time_init(void) { - struct irqaction *irq = &r4030_timer_irqaction; + struct clock_event_device *cd = &r4030_clockevent; + struct irqaction *action = &r4030_timer_irqaction; + unsigned int cpu = smp_processor_id(); BUG_ON(HZ != 100); + cd->cpumask = cpumask_of_cpu(cpu); + clockevents_register_device(cd); + action->dev_id = cd; + setup_irq(JAZZ_TIMER_IRQ, action); + /* * Set clock to 100Hz. * @@ -150,8 +158,5 @@ void __init plat_time_init(void) * a programmable 4-bit divider. This makes it fairly inflexible. */ r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9); - setup_irq(JAZZ_TIMER_IRQ, irq); - - clockevents_register_device(&r4030_clockevent); setup_pit_timer(); } diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 3196509a28d..b551535b7e4 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -8,9 +8,13 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o +obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o +obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o +obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o +obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ irix5sys.o sysirix.o diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c new file mode 100644 index 00000000000..21e6d63eb4d --- /dev/null +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2000,2001,2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/bcm1480_int.h> +#include <asm/sibyte/bcm1480_scd.h> + +#include <asm/sibyte/sb1250.h> + +#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0 +#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 +#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 + +/* + * The general purpose timer ticks at 1MHz independent if + * the rest of the system + */ +static void sibyte_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + __raw_writeq(0, cfg); + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + cfg); + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* Stop the timer until we actually program a shot */ + case CLOCK_EVT_MODE_SHUTDOWN: + __raw_writeq(0, cfg); + break; + + case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */ + case CLOCK_EVT_MODE_RESUME: + ; + } +} + +static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + __raw_writeq(delta - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE, cfg); + + return 0; +} + +static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = dev_id; + void __iomem *cfg; + unsigned long tmode; + + if (cd->mode == CLOCK_EVT_MODE_PERIODIC) + tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS; + else + tmode = 0; + + /* ACK interrupt */ + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + ____raw_writeq(tmode, cfg); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent); +static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction); +static DEFINE_PER_CPU(char [18], sibyte_hpt_name); + +void __cpuinit sb1480_clockevent_init(void) +{ + unsigned int cpu = smp_processor_id(); + unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu; + struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu); + struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu); + unsigned char *name = per_cpu(sibyte_hpt_name, cpu); + + BUG_ON(cpu > 3); /* Only have 4 general purpose timers */ + + sprintf(name, "bcm1480-counter-%d", cpu); + cd->name = name; + cd->features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + clockevent_set_clock(cd, V_SCD_TIMER_FREQ); + cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); + cd->min_delta_ns = clockevent_delta2ns(1, cd); + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = sibyte_next_event; + cd->set_mode = sibyte_set_mode; + clockevents_register_device(cd); + + bcm1480_mask_irq(cpu, irq); + + /* + * Map the timer interrupt to IP[4] of this cpu + */ + __raw_writeq(IMR_IP4_VAL, + IOADDR(A_BCM1480_IMR_REGISTER(cpu, + R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3))); + + bcm1480_unmask_irq(cpu, irq); + + action->handler = sibyte_counter_handler; + action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->name = name; + action->dev_id = cd; + setup_irq(irq, action); +} diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c new file mode 100644 index 00000000000..e2029d0fc39 --- /dev/null +++ b/arch/mips/kernel/cevt-sb1250.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_scd.h> + +#define IMR_IP2_VAL K_INT_MAP_I0 +#define IMR_IP3_VAL K_INT_MAP_I1 +#define IMR_IP4_VAL K_INT_MAP_I2 + +/* + * The general purpose timer ticks at 1MHz independent if + * the rest of the system + */ +static void sibyte_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + __raw_writeq(0, cfg); + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + cfg); + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* Stop the timer until we actually program a shot */ + case CLOCK_EVT_MODE_SHUTDOWN: + __raw_writeq(0, cfg); + break; + + case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */ + case CLOCK_EVT_MODE_RESUME: + ; + } +} + +static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + __raw_writeq(delta - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE, cfg); + + return 0; +} + +static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = dev_id; + void __iomem *cfg; + unsigned long tmode; + + if (cd->mode == CLOCK_EVT_MODE_PERIODIC) + tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS; + else + tmode = 0; + + /* ACK interrupt */ + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + ____raw_writeq(tmode, cfg); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent); +static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction); +static DEFINE_PER_CPU(char [18], sibyte_hpt_name); + +void __cpuinit sb1250_clockevent_init(void) +{ + unsigned int cpu = smp_processor_id(); + unsigned int irq = K_INT_TIMER_0 + cpu; + struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu); + struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu); + unsigned char *name = per_cpu(sibyte_hpt_name, cpu); + + /* Only have 4 general purpose timers, and we use last one as hpt */ + BUG_ON(cpu > 2); + + sprintf(name, "sb1250-counter-%d", cpu); + cd->name = name; + cd->features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + clockevent_set_clock(cd, V_SCD_TIMER_FREQ); + cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); + cd->min_delta_ns = clockevent_delta2ns(1, cd); + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = sibyte_next_event; + cd->set_mode = sibyte_set_mode; + clockevents_register_device(cd); + + sb1250_mask_irq(cpu, irq); + + /* + * Map the timer interrupt to IP[4] of this cpu + */ + __raw_writeq(IMR_IP4_VAL, + IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + + (irq << 3))); + + sb1250_unmask_irq(cpu, irq); + + action->handler = sibyte_counter_handler; + action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->name = name; + action->dev_id = cd; + setup_irq(irq, action); +} diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c new file mode 100644 index 00000000000..868745e7184 --- /dev/null +++ b/arch/mips/kernel/csrc-bcm1480.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2000,2001,2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/clocksource.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/bcm1480_int.h> +#include <asm/sibyte/bcm1480_scd.h> + +#include <asm/sibyte/sb1250.h> + +static cycle_t bcm1480_hpt_read(void) +{ + return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT)); +} + +struct clocksource bcm1480_clocksource = { + .name = "zbbus-cycles", + .rating = 200, + .read = bcm1480_hpt_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init sb1480_clocksource_init(void) +{ + struct clocksource *cs = &bcm1480_clocksource; + unsigned int plldiv; + unsigned long zbbus; + + plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); + zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000); + clocksource_set_clock(cs, zbbus); + clocksource_register(cs); +} diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c new file mode 100644 index 00000000000..ebb16e66887 --- /dev/null +++ b/arch/mips/kernel/csrc-sb1250.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/clocksource.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_scd.h> + +#define SB1250_HPT_NUM 3 +#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ + +/* + * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over + * again. + */ +static cycle_t sb1250_hpt_read(void) +{ + unsigned int count; + + count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); + + return SB1250_HPT_VALUE - count; +} + +struct clocksource bcm1250_clocksource = { + .name = "MIPS", + .rating = 200, + .read = sb1250_hpt_read, + .mask = CLOCKSOURCE_MASK(23), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init sb1250_clocksource_init(void) +{ + struct clocksource *cs = &bcm1250_clocksource; + + /* Setup hpt using timer #3 but do not enable irq for it */ + __raw_writeq(0, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, + R_SCD_TIMER_CFG))); + __raw_writeq(SB1250_HPT_VALUE, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, + R_SCD_TIMER_INIT))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, + R_SCD_TIMER_CFG))); + + clocksource_set_clock(cs, V_SCD_TIMER_FREQ); + clocksource_register(cs); +} diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 5d9830df359..c2d497ceffd 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -12,8 +12,9 @@ #include <asm/delay.h> #include <asm/i8253.h> #include <asm/io.h> +#include <asm/time.h> -static DEFINE_SPINLOCK(i8253_lock); +DEFINE_SPINLOCK(i8253_lock); /* * Initialize the PIT timer. @@ -87,11 +88,10 @@ struct clock_event_device pit_clockevent = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = init_pit_timer, .set_next_event = pit_next_event, - .shift = 32, .irq = 0, }; -irqreturn_t timer_interrupt(int irq, void *dev_id) +static irqreturn_t timer_interrupt(int irq, void *dev_id) { pit_clockevent.event_handler(&pit_clockevent); @@ -111,19 +111,20 @@ static struct irqaction irq0 = { */ void __init setup_pit_timer(void) { + struct clock_event_device *cd = &pit_clockevent; + unsigned int cpu = smp_processor_id(); + /* * Start pit with the boot cpu mask and make it global after the * IO_APIC has been initialized. */ - pit_clockevent.cpumask = cpumask_of_cpu(0); - pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); - pit_clockevent.max_delta_ns = - clockevent_delta2ns(0x7FFF, &pit_clockevent); - pit_clockevent.min_delta_ns = - clockevent_delta2ns(0xF, &pit_clockevent); - clockevents_register_device(&pit_clockevent); - - irq0.mask = cpumask_of_cpu(0); + cd->cpumask = cpumask_of_cpu(cpu); + clockevent_set_clock(cd, CLOCK_TICK_RATE); + cd->max_delta_ns = clockevent_delta2ns(0x7FFF, cd); + cd->min_delta_ns = clockevent_delta2ns(0xF, cd); + clockevents_register_device(cd); + + irq0.mask = cpumask_of_cpu(cpu); setup_irq(0, &irq0); } diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 27228f583da..3284b9b4eca 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -3,8 +3,7 @@ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * Copyright (c) 2003, 2004 Maciej W. Rozycki * - * Common time service routines for MIPS machines. See - * Documentation/mips/time.README. + * Common time service routines for MIPS machines. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -18,28 +17,17 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/param.h> -#include <linux/profile.h> #include <linux/time.h> #include <linux/timex.h> #include <linux/smp.h> -#include <linux/kernel_stat.h> #include <linux/spinlock.h> -#include <linux/interrupt.h> #include <linux/module.h> -#include <linux/kallsyms.h> -#include <asm/bootinfo.h> -#include <asm/cache.h> -#include <asm/compiler.h> -#include <asm/cpu.h> #include <asm/cpu-features.h> #include <asm/div64.h> -#include <asm/sections.h> #include <asm/smtc_ipi.h> #include <asm/time.h> -#include <irq.h> - /* * forward reference */ @@ -63,14 +51,6 @@ int update_persistent_clock(struct timespec now) } /* - * Null high precision timer functions for systems lacking one. - */ -static cycle_t null_hpt_read(void) -{ - return 0; -} - -/* * High precision timer functions for a R4k-compatible timer. */ static cycle_t c0_hpt_read(void) @@ -80,22 +60,6 @@ static cycle_t c0_hpt_read(void) int (*mips_timer_state)(void); -/* - * local_timer_interrupt() does profiling and process accounting - * on a per-CPU basis. - * - * In UP mode, it is invoked from the (global) timer_interrupt. - * - * In SMP mode, it might invoked by per-CPU timer interrupt, or - * a broadcasted inter-processor interrupt which itself is triggered - * by the global timer interrupt. - */ -void local_timer_interrupt(int irq, void *dev_id) -{ - profile_tick(CPU_PROFILING); - update_process_times(user_mode(get_irq_regs())); -} - int null_perf_irq(void) { return 0; @@ -120,6 +84,13 @@ EXPORT_SYMBOL(perf_irq); unsigned int mips_hpt_frequency; +static struct clocksource clocksource_mips = { + .name = "MIPS", + .read = c0_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + static unsigned int __init calibrate_hpt(void) { cycle_t frequency, hpt_start, hpt_end, hpt_count, hz; @@ -162,12 +133,6 @@ static unsigned int __init calibrate_hpt(void) return frequency >> log_2_loops; } -struct clocksource clocksource_mips = { - .name = "MIPS", - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) { u64 temp; @@ -203,9 +168,6 @@ void __cpuinit clockevent_set_clock(struct clock_event_device *cd, static void __init init_mips_clocksource(void) { - if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read) - return; - /* Calclate a somewhat reasonable rating value */ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; @@ -227,7 +189,7 @@ void __init __weak plat_time_init(void) * setup_irq calls and each clock_event_device should use its own * struct irqrequest. */ -void __init plat_timer_setup(struct irqaction *irq) +void __init plat_timer_setup(void) { BUG(); } @@ -236,21 +198,8 @@ void __init time_init(void) { plat_time_init(); - /* Choose appropriate high precision timer routines. */ - if (!cpu_has_counter && !clocksource_mips.read) - /* No high precision timer -- sorry. */ - clocksource_mips.read = null_hpt_read; - else if (!mips_hpt_frequency && !mips_timer_state) { - /* A high precision timer of unknown frequency. */ - if (!clocksource_mips.read) - /* No external high precision timer -- use R4k. */ - clocksource_mips.read = c0_hpt_read; - } else { + if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) { /* We know counter frequency. Or we can get it. */ - if (!clocksource_mips.read) { - /* No external high precision timer -- use R4k. */ - clocksource_mips.read = c0_hpt_read; - } if (!mips_hpt_frequency) mips_hpt_frequency = calibrate_hpt(); @@ -258,8 +207,8 @@ void __init time_init(void) printk("Using %u.%03u MHz high precision timer.\n", ((mips_hpt_frequency + 500) / 1000) / 1000, ((mips_hpt_frequency + 500) / 1000) % 1000); + init_mips_clocksource(); } - init_mips_clocksource(); mips_clockevent_init(); } diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c index 4681757460a..11f98476788 100644 --- a/arch/mips/qemu/q-irq.c +++ b/arch/mips/qemu/q-irq.c @@ -1,4 +1,5 @@ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/linkage.h> #include <asm/i8259.h> diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index dc59c3b708e..08d45369be4 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -131,7 +131,7 @@ static struct irq_chip rt_irq_type = { static int rt_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); - int slice putoslice(cpu); + int slice = cputoslice(cpu); unsigned long cnt; cnt = LOCAL_HUB_L(PI_RT_COUNT); @@ -169,7 +169,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) /* * Ack */ - LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, cnt); + LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, 0); cd->event_handler(cd); return IRQ_HANDLED; diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index 7309e48d163..77febd68fcd 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -42,7 +42,7 @@ static struct platform_device uart8250_device = { static int __init uart8250_init(void) { uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1; - uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1; + uart8250_data[1].membase = (void __iomem *) &mace->isa.serial2; return platform_device_register(&uart8250_device); } diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index e8fb880272b..366b19d33f7 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -1,5 +1,7 @@ config SIBYTE_SB1250 bool + select CEVT_SB1250 + select CSRC_SB1250 select HW_HAS_PCI select IRQ_CPU select SIBYTE_ENABLE_LDT_IF_PCI @@ -9,6 +11,8 @@ config SIBYTE_SB1250 config SIBYTE_BCM1120 bool + select CEVT_SB1250 + select CSRC_SB1250 select IRQ_CPU select SIBYTE_BCM112X select SIBYTE_HAS_ZBUS_PROFILING @@ -16,6 +20,8 @@ config SIBYTE_BCM1120 config SIBYTE_BCM1125 bool + select CEVT_SB1250 + select CSRC_SB1250 select HW_HAS_PCI select IRQ_CPU select SIBYTE_BCM112X @@ -24,6 +30,8 @@ config SIBYTE_BCM1125 config SIBYTE_BCM1125H bool + select CEVT_SB1250 + select CSRC_SB1250 select HW_HAS_PCI select IRQ_CPU select SIBYTE_BCM112X @@ -33,12 +41,16 @@ config SIBYTE_BCM1125H config SIBYTE_BCM112X bool + select CEVT_SB1250 + select CSRC_SB1250 select IRQ_CPU select SIBYTE_SB1xxx_SOC select SIBYTE_HAS_ZBUS_PROFILING config SIBYTE_BCM1x80 bool + select CEVT_BCM1480 + select CSRC_BCM1480 select HW_HAS_PCI select IRQ_CPU select SIBYTE_HAS_ZBUS_PROFILING @@ -47,6 +59,8 @@ config SIBYTE_BCM1x80 config SIBYTE_BCM1x55 bool + select CEVT_BCM1480 + select CSRC_BCM1480 select HW_HAS_PCI select IRQ_CPU select SIBYTE_SB1xxx_SOC diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 61790c4bfb6..e28d626255a 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -265,21 +265,6 @@ void __init init_bcm1480_irqs(void) } } - -static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id) -{ - return IRQ_NONE; -} - -static struct irqaction bcm1480_dummy_action = { - .handler = bcm1480_dummy_handler, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "bcm1480-private", - .next = NULL, - .dev_id = 0 -}; - /* * init_IRQ is called early in the boot sequence from init/main.c. It * is responsible for setting up the interrupt mapper and installing the @@ -308,7 +293,6 @@ static struct irqaction bcm1480_dummy_action = { void __init arch_init_irq(void) { - unsigned int i, cpu; u64 tmp; unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c index bbf19bfabcc..1680a68952a 100644 --- a/arch/mips/sibyte/bcm1480/time.c +++ b/arch/mips/sibyte/bcm1480/time.c @@ -15,163 +15,10 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/percpu.h> -#include <linux/spinlock.h> +#include <linux/init.h> -#include <asm/addrspace.h> -#include <asm/time.h> -#include <asm/io.h> - -#include <asm/sibyte/bcm1480_regs.h> -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/bcm1480_int.h> -#include <asm/sibyte/bcm1480_scd.h> - -#include <asm/sibyte/sb1250.h> - - -#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0 -#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 -#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 - -/* - * The general purpose timer ticks at 1MHz independent if - * the rest of the system - */ -static void sibyte_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - __raw_writeq(0, timer_cfg); - __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - timer_cfg); - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* Stop the timer until we actually program a shot */ - case CLOCK_EVT_MODE_SHUTDOWN: - __raw_writeq(0, timer_cfg); - break; - - case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */ - case CLOCK_EVT_MODE_RESUME: - ; - } -} - -static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_init; - unsigned int cnt; - int res; - - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - cnt = __raw_readq(timer_init); - cnt += delta; - __raw_writeq(cnt, timer_init); - res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0; - - return res; -} - -static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd = dev_id; - void __iomem *timer_cfg; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - - /* Reset the timer */ - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - timer_cfg); - cd->event_handler(cd); - - return IRQ_HANDLED; -} - -static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent); -static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction); -static DEFINE_PER_CPU(char [18], sibyte_hpt_name); - -void __cpuinit sb1480_clockevent_init(void) -{ - unsigned int cpu = smp_processor_id(); - unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu; - struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu); - struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu); - unsigned char *name = per_cpu(sibyte_hpt_name, cpu); - - BUG_ON(cpu > 3); /* Only have 4 general purpose timers */ - - sprintf(name, "bcm1480-counter %d", cpu); - cd->name = name; - cd->features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT; - clockevent_set_clock(cd, V_SCD_TIMER_FREQ); - cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); - cd->min_delta_ns = clockevent_delta2ns(1, cd); - cd->rating = 200; - cd->irq = irq; - cd->cpumask = cpumask_of_cpu(cpu); - cd->set_next_event = sibyte_next_event; - cd->set_mode = sibyte_set_mode; - clockevents_register_device(cd); - - bcm1480_mask_irq(cpu, irq); - - /* - * Map timer interrupt to IP[4] of this cpu - */ - __raw_writeq(IMR_IP4_VAL, - IOADDR(A_BCM1480_IMR_REGISTER(cpu, - R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3))); - - bcm1480_unmask_irq(cpu, irq); - - action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU; - action->name = name; - action->dev_id = cd; - setup_irq(irq, action); -} - -static cycle_t bcm1480_hpt_read(void) -{ - return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT)); -} - -struct clocksource bcm1480_clocksource = { - .name = "zbbus-cycles", - .rating = 200, - .read = bcm1480_hpt_read, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -void __init sb1480_clocksource_init(void) -{ - struct clocksource *cs = &bcm1480_clocksource; - unsigned int plldiv; - unsigned long zbbus; - - plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); - zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000); - clocksource_set_clock(cs, zbbus); - clocksource_register(cs); -} +extern void sb1480_clockevent_init(void); +extern void sb1480_clocksource_init(void); void __init plat_time_init(void) { diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 52d18fc91f3..eac9065ffe0 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -236,20 +236,6 @@ void __init init_sb1250_irqs(void) } -static irqreturn_t sb1250_dummy_handler(int irq, void *dev_id) -{ - return IRQ_NONE; -} - -static struct irqaction sb1250_dummy_action = { - .handler = sb1250_dummy_handler, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "sb1250-private", - .next = NULL, - .dev_id = 0 -}; - /* * arch_init_irq is called early in the boot sequence from init/main.c via * init_IRQ. It is responsible for setting up the interrupt mapper and diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 95ad34e3fba..68337bf7a5a 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -15,195 +15,10 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include <linux/init.h> -/* - * These are routines to set up and handle interrupts from the - * sb1250 general purpose timer 0. We're using the timer as a - * system clock, so we set it up to run at 100 Hz. On every - * interrupt, we update our idea of what the time of day is, - * then call do_timer() in the architecture-independent kernel - * code to do general bookkeeping (e.g. update jiffies, run - * bottom halves, etc.) - */ -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/kernel_stat.h> - -#include <asm/irq.h> -#include <asm/addrspace.h> -#include <asm/time.h> -#include <asm/io.h> - -#include <asm/sibyte/sb1250.h> -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/sb1250_int.h> -#include <asm/sibyte/sb1250_scd.h> - - -#define IMR_IP2_VAL K_INT_MAP_I0 -#define IMR_IP3_VAL K_INT_MAP_I1 -#define IMR_IP4_VAL K_INT_MAP_I2 - -#define SB1250_HPT_NUM 3 -#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ - - -/* - * The general purpose timer ticks at 1 Mhz independent if - * the rest of the system - */ -static void sibyte_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - __raw_writeq(0, timer_cfg); - __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - timer_cfg); - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* Stop the timer until we actually program a shot */ - case CLOCK_EVT_MODE_SHUTDOWN: - __raw_writeq(0, timer_cfg); - break; - - case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */ - case CLOCK_EVT_MODE_RESUME: - ; - } -} - -static int -sibyte_next_event(unsigned long delta, struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - void __iomem *timer_cfg, *timer_init; - - timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); - timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); - - __raw_writeq(0, timer_cfg); - __raw_writeq(delta, timer_init); - __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg); - - return 0; -} - -static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) -{ - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd = dev_id; - - /* ACK interrupt */ - ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); - - cd->event_handler(cd); - - return IRQ_HANDLED; -} - -static struct irqaction sibyte_irqaction = { - .handler = sibyte_counter_handler, - .flags = IRQF_DISABLED | IRQF_PERCPU, - .name = "timer", -}; - -static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent); -static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction); -static DEFINE_PER_CPU(char [18], sibyte_hpt_name); - -void __cpuinit sb1250_clockevent_init(void) -{ - unsigned int cpu = smp_processor_id(); - unsigned int irq = K_INT_TIMER_0 + cpu; - struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu); - struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu); - unsigned char *name = per_cpu(sibyte_hpt_name, cpu); - - /* Only have 4 general purpose timers, and we use last one as hpt */ - BUG_ON(cpu > 2); - - sprintf(name, "bcm1480-counter %d", cpu); - cd->name = name; - cd->features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT; - clockevent_set_clock(cd, V_SCD_TIMER_FREQ); - cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); - cd->min_delta_ns = clockevent_delta2ns(1, cd); - cd->rating = 200; - cd->irq = irq; - cd->cpumask = cpumask_of_cpu(cpu); - cd->set_next_event = sibyte_next_event; - cd->set_mode = sibyte_set_mode; - clockevents_register_device(cd); - - sb1250_mask_irq(cpu, irq); - - /* Map the timer interrupt to ip[4] of this cpu */ - __raw_writeq(IMR_IP4_VAL, - IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + - (irq << 3))); - cd->cpumask = cpumask_of_cpu(0); - - sb1250_unmask_irq(cpu, irq); - - action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU; - action->name = name; - action->dev_id = cd; - setup_irq(irq, &sibyte_irqaction); -} - -/* - * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over - * again. - */ -static cycle_t sb1250_hpt_read(void) -{ - unsigned int count; - - count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); - - return SB1250_HPT_VALUE - count; -} - -struct clocksource bcm1250_clocksource = { - .name = "MIPS", - .rating = 200, - .read = sb1250_hpt_read, - .mask = CLOCKSOURCE_MASK(23), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -void __init sb1250_clocksource_init(void) -{ - struct clocksource *cs = &bcm1250_clocksource; - - /* Setup hpt using timer #3 but do not enable irq for it */ - __raw_writeq(0, - IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, - R_SCD_TIMER_CFG))); - __raw_writeq(SB1250_HPT_VALUE, - IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, - R_SCD_TIMER_INIT))); - __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, - R_SCD_TIMER_CFG))); - - clocksource_set_clock(cs, V_SCD_TIMER_FREQ); - clocksource_register(cs); -} +extern void sb1250_clocksource_init(void); +extern void sb1250_clockevent_init(void); void __init plat_time_init(void) { diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 60bc62ef093..6f339af08d2 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -1,6 +1,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/time.h> +#include <linux/clockchips.h> #include <asm/i8253.h> #include <asm/sni.h> @@ -80,7 +81,7 @@ static void __init sni_a20r_timer_setup(void) unsigned int cpu = smp_processor_id(); cd->cpumask = cpumask_of_cpu(cpu); - + clockevents_register_device(cd); action->dev_id = cd; setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction); } @@ -169,8 +170,6 @@ void __init plat_time_init(void) mips_hpt_frequency = r4k_tick * HZ; - setup_pit_timer(); - switch (sni_brd_type) { case SNI_BRD_10: case SNI_BRD_10NEW: diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 4ec716d8c1a..1330061020a 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -513,7 +513,7 @@ config ZFCPDUMP default n help Select this option if you want to build an zfcpdump enabled kernel. - Refer to "Documentation/s390/zfcpdump.txt" for more details on this. + Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this. endmenu diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig index ba204bac49d..6884d5a518a 100644 --- a/arch/sh64/Kconfig +++ b/arch/sh64/Kconfig @@ -1,6 +1,6 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. # mainmenu "Linux/SH64 Kernel Configuration" diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index bd59ab0760b..10b212a1f9f 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -408,7 +408,7 @@ config SUNOS_EMUL config SOLARIS_EMUL tristate "Solaris binary emulation (EXPERIMENTAL)" - depends on SPARC32_COMPAT && EXPERIMENTAL + depends on SPARC32_COMPAT && NET && EXPERIMENTAL help This is experimental code which will enable you to run (many) Solaris binaries on your SPARC Linux machine. diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index e023d4b2fef..22734ac08c8 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Sun Oct 21 19:57:44 2007 +# Linux kernel version: 2.6.24-rc1 +# Wed Oct 31 15:36:47 2007 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -19,6 +19,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_SPARC64_PAGE_SIZE_8KB=y # CONFIG_SPARC64_PAGE_SIZE_64KB is not set # CONFIG_SPARC64_PAGE_SIZE_512KB is not set @@ -55,7 +56,8 @@ CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set @@ -117,22 +119,7 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=m -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_US3_FREQ=m -CONFIG_US2E_FREQ=m +# CONFIG_CPU_FREQ is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -161,7 +148,7 @@ CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y -# CONFIG_SUN_LDOMS is not set +CONFIG_SUN_LDOMS=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -338,6 +325,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y CONFIG_ATA_OVER_ETH=m +CONFIG_SUNVDC=m CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set @@ -440,12 +428,12 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -506,7 +494,7 @@ CONFIG_DM_ZERO=m # CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set -CONFIG_DUMMY=m +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set @@ -523,6 +511,7 @@ CONFIG_MII=m # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set CONFIG_CASSINI=m +CONFIG_SUNVNET=m # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -577,7 +566,7 @@ CONFIG_NETDEV_10000=y # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set +CONFIG_NIU=m # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_TR is not set @@ -702,7 +691,8 @@ CONFIG_SERIAL_SUNCORE=y # CONFIG_SERIAL_SUNZILOG is not set CONFIG_SERIAL_SUNSU=y CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_SERIAL_SUNSAB=m +CONFIG_SERIAL_SUNSAB=y +CONFIG_SERIAL_SUNSAB_CONSOLE=y CONFIG_SERIAL_SUNHV=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -880,9 +870,17 @@ CONFIG_FB_TILEBLITTING=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_UVESA is not set -# CONFIG_FB_SBUS is not set -# CONFIG_FB_XVR500 is not set -# CONFIG_FB_XVR2500 is not set +CONFIG_FB_SBUS=y +# CONFIG_FB_BW2 is not set +# CONFIG_FB_CG3 is not set +CONFIG_FB_CG6=y +CONFIG_FB_FFB=y +# CONFIG_FB_TCX is not set +# CONFIG_FB_CG14 is not set +# CONFIG_FB_P9100 is not set +# CONFIG_FB_LEO is not set +CONFIG_FB_XVR500=y +CONFIG_FB_XVR2500=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set @@ -892,7 +890,11 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_BACKLIGHT is not set # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set +CONFIG_FB_ATY=y +CONFIG_FB_ATY_CT=y +# CONFIG_FB_ATY_GENERIC_LCD is not set +CONFIG_FB_ATY_GX=y +# CONFIG_FB_ATY_BACKLIGHT is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set @@ -1191,7 +1193,7 @@ CONFIG_USB_STORAGE=m # # Misc Linux/SPARC drivers # -CONFIG_SUN_OPENPROMIO=m +CONFIG_SUN_OPENPROMIO=y # CONFIG_OBP_FLASH is not set # CONFIG_SUN_BPP is not set # CONFIG_BBC_I2C is not set @@ -1199,11 +1201,6 @@ CONFIG_SUN_OPENPROMIO=m # CONFIG_DISPLAY7SEG is not set # -# Fibre Channel support -# -# CONFIG_FC4 is not set - -# # File systems # CONFIG_EXT2_FS=y @@ -1345,6 +1342,7 @@ CONFIG_KPROBES=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1371,6 +1369,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 23fad7ebdd0..60765e314bd 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -221,7 +221,7 @@ EXPORT_SYMBOL(pci_dma_supported); /* I/O device mmaping on Sparc64. */ EXPORT_SYMBOL(io_remap_pfn_range); -#ifdef CONFIG_COMPAT +#if defined(CONFIG_COMPAT) && defined(CONFIG_NET) /* Solaris/SunOS binary compatibility */ EXPORT_SYMBOL(verify_compat_iovec); #endif diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index cd8c740cba1..a2cf955294c 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -1070,7 +1070,7 @@ static int set_rtc_mmss(unsigned long nowtime) * Not having a register set can lead to trouble. * Also starfire doesn't have a tod clock. */ - if (!mregs && !dregs & !bregs) + if (!mregs && !dregs && !bregs) return -1; if (mregs) { diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 7ff0a02f581..a3e6e4b635b 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -182,7 +182,9 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_idx, unsign break; default: - BUG(); + printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n", + current->comm, current->pid, tsb_bytes); + do_exit(SIGSEGV); }; tte |= pte_sz_bits(page_sz); diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 737c26923c0..2865c105b6a 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -120,13 +120,6 @@ __spitfire_flush_tlb_mm_slow: /* * The following code flushes one page_size worth. */ -#if (PAGE_SHIFT == 13) -#define ITAG_MASK 0xfe -#elif (PAGE_SHIFT == 16) -#define ITAG_MASK 0x7fe -#else -#error unsupported PAGE_SIZE -#endif .section .kprobes.text, "ax" .align 32 .globl __flush_icache_page diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 970b2defe7d..761ca7b5f12 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -6,9 +6,8 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" config EARLY_PRINTK - bool "Early printk" if EMBEDDED && DEBUG_KERNEL + bool "Early printk" if EMBEDDED && DEBUG_KERNEL && X86_32 default y - depends on X86_32 help Write kernel log output directly into the VGA buffer or to a serial port. @@ -91,7 +90,7 @@ config DOUBLEFAULT config IOMMU_DEBUG bool "Enable IOMMU debugging" - depends on IOMMU && DEBUG_KERNEL + depends on GART_IOMMU && DEBUG_KERNEL depends on X86_64 help Force the IOMMU to on even when you have less than 4GB of @@ -113,7 +112,4 @@ config IOMMU_LEAK Add a simple leak tracer to the IOMMU code. This is useful when you are debugging a buggy device driver that leaks IOMMU mappings. -#config X86_REMOTE_DEBUG -# bool "kgdb debugging stub" - endmenu diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64 index e2542e5b536..cc468ea6124 100644 --- a/arch/x86/Kconfig.x86_64 +++ b/arch/x86/Kconfig.x86_64 @@ -97,10 +97,6 @@ config X86_CMPXCHG bool default y -config EARLY_PRINTK - bool - default y - config GENERIC_ISA_DMA bool default y @@ -479,8 +475,8 @@ config HPET_EMULATE_RTC # Mark as embedded because too many people got it wrong. # The code disables itself when not needed. -config IOMMU - bool "IOMMU support" if EMBEDDED +config GART_IOMMU + bool "GART IOMMU support" if EMBEDDED default y select SWIOTLB select AGP @@ -687,7 +683,7 @@ source kernel/Kconfig.hz config K8_NB def_bool y - depends on AGP_AMD64 || IOMMU || (PCI && NUMA) + depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA) endmenu @@ -753,7 +749,6 @@ config PCI_DOMAINS config DMAR bool "Support for DMA Remapping Devices (EXPERIMENTAL)" depends on PCI_MSI && ACPI && EXPERIMENTAL - default y help DMA remapping (DMAR) devices support enables independent address translations for Direct Memory Access (DMA) from devices. diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index b091c5e3555..38a83f9c966 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -170,7 +170,7 @@ CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y -CONFIG_IOMMU=y +CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64 index 466337ae9a1..24671c3838b 100644 --- a/arch/x86/kernel/Makefile_64 +++ b/arch/x86/kernel/Makefile_64 @@ -25,7 +25,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o obj-$(CONFIG_PM) += suspend_64.o obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o +obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o obj-$(CONFIG_KPROBES) += kprobes_64.o diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 8f681cae7bf..5b6992799c9 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -20,14 +20,14 @@ #include <linux/ioport.h> #include <asm/e820.h> #include <asm/io.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include <asm/pci-direct.h> #include <asm/dma.h> #include <asm/k8.h> -int iommu_aperture; -int iommu_aperture_disabled __initdata = 0; -int iommu_aperture_allowed __initdata = 0; +int gart_iommu_aperture; +int gart_iommu_aperture_disabled __initdata = 0; +int gart_iommu_aperture_allowed __initdata = 0; int fallback_aper_order __initdata = 1; /* 64MB */ int fallback_aper_force __initdata = 0; @@ -204,14 +204,15 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) return 0; } -void __init iommu_hole_init(void) +void __init gart_iommu_hole_init(void) { int fix, num; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; int valid_agp = 0; - if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) + if (gart_iommu_aperture_disabled || !fix_aperture || + !early_pci_allowed()) return; printk(KERN_INFO "Checking aperture...\n"); @@ -222,7 +223,7 @@ void __init iommu_hole_init(void) continue; iommu_detected = 1; - iommu_aperture = 1; + gart_iommu_aperture = 1; aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; aper_size = (32 * 1024 * 1024) << aper_order; diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index 2d42b414b77..066f8c6af4d 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -49,7 +49,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", + NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -59,10 +59,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", - "altmovcr8", "abm", "sse4a", - "misalignsse", "3dnowprefetch", - "osvw", "ibs", NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", + "cr8_legacy", "abm", "sse4a", "misalignsse", + "3dnowprefetch", "osvw", "ibs", "sse5", + "skinit", "wdt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 639e6320518..88bb83ec895 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -17,19 +17,19 @@ #include <asm/io_apic.h> #include <asm/apic.h> -#ifdef CONFIG_IOMMU -#include <asm/iommu.h> +#ifdef CONFIG_GART_IOMMU +#include <asm/gart.h> #endif static void __init via_bugs(void) { -#ifdef CONFIG_IOMMU +#ifdef CONFIG_GART_IOMMU if ((end_pfn > MAX_DMA32_PFN || force_iommu) && - !iommu_aperture_allowed) { + !gart_iommu_aperture_allowed) { printk(KERN_INFO "Looks like a VIA chipset. Disabling IOMMU." " Override with iommu=allowed\n"); - iommu_aperture_disabled = 1; + gart_iommu_aperture_disabled = 1; } #endif } diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index 1a20fe31338..6bf1f716909 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -36,7 +36,7 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/scatterlist.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include <asm/calgary.h> #include <asm/tce.h> #include <asm/pci-direct.h> diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma_64.c index 393e2725a6e..aa805b11b24 100644 --- a/arch/x86/kernel/pci-dma_64.c +++ b/arch/x86/kernel/pci-dma_64.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <linux/dmar.h> #include <asm/io.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include <asm/calgary.h> int iommu_merge __read_mostly = 1; @@ -275,7 +275,7 @@ __init int iommu_setup(char *p) swiotlb = 1; #endif -#ifdef CONFIG_IOMMU +#ifdef CONFIG_GART_IOMMU gart_parse_options(p); #endif @@ -298,8 +298,8 @@ void __init pci_iommu_alloc(void) * The order of these functions is important for * fall-back/fail-over reasons */ -#ifdef CONFIG_IOMMU - iommu_hole_init(); +#ifdef CONFIG_GART_IOMMU + gart_iommu_hole_init(); #endif #ifdef CONFIG_CALGARY_IOMMU @@ -321,7 +321,7 @@ static int __init pci_iommu_init(void) intel_iommu_init(); -#ifdef CONFIG_IOMMU +#ifdef CONFIG_GART_IOMMU gart_iommu_init(); #endif diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 79b514b381b..06bcba53604 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -30,17 +30,17 @@ #include <asm/mtrr.h> #include <asm/pgtable.h> #include <asm/proto.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include <asm/cacheflush.h> #include <asm/swiotlb.h> #include <asm/dma.h> #include <asm/k8.h> -unsigned long iommu_bus_base; /* GART remapping area (physical) */ +static unsigned long iommu_bus_base; /* GART remapping area (physical) */ static unsigned long iommu_size; /* size of remapping area bytes */ static unsigned long iommu_pages; /* .. and in pages */ -u32 *iommu_gatt_base; /* Remapping table */ +static u32 *iommu_gatt_base; /* Remapping table */ /* If this is disabled the IOMMU will use an optimized flushing strategy of only flushing when an mapping is reused. With it true the GART is flushed @@ -135,8 +135,8 @@ static void flush_gart(void) /* Debugging aid for drivers that don't free their IOMMU tables */ static void **iommu_leak_tab; static int leak_trace; -int iommu_leak_pages = 20; -void dump_leak(void) +static int iommu_leak_pages = 20; +static void dump_leak(void) { int i; static int dump; @@ -627,12 +627,12 @@ void __init gart_iommu_init(void) return; /* Did we detect a different HW IOMMU? */ - if (iommu_detected && !iommu_aperture) + if (iommu_detected && !gart_iommu_aperture) return; if (no_iommu || (!force_iommu && end_pfn <= MAX_DMA32_PFN) || - !iommu_aperture || + !gart_iommu_aperture || (no_agp && init_k8_gatt(&info) < 0)) { if (end_pfn > MAX_DMA32_PFN) { printk(KERN_ERR "WARNING more than 4GB of memory " @@ -733,9 +733,9 @@ void __init gart_parse_options(char *p) fix_aperture = 0; /* duplicated from pci-dma.c */ if (!strncmp(p,"force",5)) - iommu_aperture_allowed = 1; + gart_iommu_aperture_allowed = 1; if (!strncmp(p,"allowed",7)) - iommu_aperture_allowed = 1; + gart_iommu_aperture_allowed = 1; if (!strncmp(p, "memaper", 7)) { fallback_aper_force = 1; p += 7; diff --git a/arch/x86/kernel/pci-nommu_64.c b/arch/x86/kernel/pci-nommu_64.c index faf70bdca33..ab08e183222 100644 --- a/arch/x86/kernel/pci-nommu_64.c +++ b/arch/x86/kernel/pci-nommu_64.c @@ -7,7 +7,7 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include <asm/processor.h> #include <asm/dma.h> diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c index b2f405ea7c8..102866d729a 100644 --- a/arch/x86/kernel/pci-swiotlb_64.c +++ b/arch/x86/kernel/pci-swiotlb_64.c @@ -5,7 +5,7 @@ #include <linux/module.h> #include <linux/dma-mapping.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include <asm/swiotlb.h> #include <asm/dma.h> diff --git a/arch/x86/kernel/reboot_64.c b/arch/x86/kernel/reboot_64.c index 776eb06b651..71b13c5f581 100644 --- a/arch/x86/kernel/reboot_64.c +++ b/arch/x86/kernel/reboot_64.c @@ -17,7 +17,7 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/apic.h> -#include <asm/iommu.h> +#include <asm/gart.h> /* * Power off function, if any diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index cc0e91447b7..e1e18c34c82 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -86,9 +86,6 @@ unsigned long mmu_cr4_features; /* for MCA, but anyone else can use it if they want */ unsigned int machine_id; -#ifdef CONFIG_MCA -EXPORT_SYMBOL(machine_id); -#endif unsigned int machine_submodel_id; unsigned int BIOS_revision; unsigned int mca_pentium_flag; diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index e7a9e36bd52..238633d3d09 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -1040,7 +1040,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", + NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -1050,10 +1050,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", - "altmovcr8", "abm", "sse4a", - "misalignsse", "3dnowprefetch", - "osvw", "ibs", NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", + "cr8_legacy", "abm", "sse4a", "misalignsse", + "3dnowprefetch", "osvw", "ibs", "sse5", + "skinit", "wdt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index fe608a45ffb..13a474d3c6e 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -40,7 +40,7 @@ struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); -bootmem_data_t node0_bdata; +static bootmem_data_t node0_bdata; /* * numa interface - we expect the numa architecture specific code to have @@ -404,7 +404,7 @@ void __init set_highmem_pages_init(int bad_ppro) } #ifdef CONFIG_MEMORY_HOTPLUG -int paddr_to_nid(u64 addr) +static int paddr_to_nid(u64 addr) { int nid; unsigned long pfn = PFN_DOWN(addr); diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 85ffbb49149..d3cb3d6af4c 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -1,5 +1,5 @@ # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. mainmenu "Linux/Xtensa Kernel Configuration" diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 5d0e26a5c34..da3a08fa9e4 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -3,7 +3,7 @@ # menuconfig ACPI - bool "ACPI Support (Advanced Configuration and Power Interface) Support" + bool "ACPI (Advanced Configuration and Power Interface) Support" depends on !X86_NUMAQ depends on !X86_VISWS depends on !IA64_HP_SIM @@ -88,7 +88,8 @@ config ACPI_PROC_EVENT config ACPI_AC tristate "AC Adapter" - depends on X86 && POWER_SUPPLY + depends on X86 + select POWER_SUPPLY default y help This driver adds support for the AC Adapter object, which indicates @@ -97,7 +98,8 @@ config ACPI_AC config ACPI_BATTERY tristate "Battery" - depends on X86 && POWER_SUPPLY + depends on X86 + select POWER_SUPPLY default y help This driver adds support for battery information through @@ -352,7 +354,7 @@ config ACPI_HOTPLUG_MEMORY config ACPI_SBS tristate "Smart Battery System" depends on X86 - depends on POWER_SUPPLY + select POWER_SUPPLY help This driver adds support for the Smart Battery System, another type of access to battery information, found on some laptops. diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 681e26b56b1..c2ce0ad2169 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -125,11 +125,15 @@ static int acpi_battery_technology(struct acpi_battery *battery) return POWER_SUPPLY_TECHNOLOGY_NiMH; if (!strcasecmp("LION", battery->type)) return POWER_SUPPLY_TECHNOLOGY_LION; + if (!strcasecmp("LI-ION", battery->type)) + return POWER_SUPPLY_TECHNOLOGY_LION; if (!strcasecmp("LiP", battery->type)) return POWER_SUPPLY_TECHNOLOGY_LIPO; return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; } +static int acpi_battery_update(struct acpi_battery *battery); + static int acpi_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -139,6 +143,7 @@ static int acpi_battery_get_property(struct power_supply *psy, if ((!acpi_battery_present(battery)) && psp != POWER_SUPPLY_PROP_PRESENT) return -ENODEV; + acpi_battery_update(battery); switch (psp) { case POWER_SUPPLY_PROP_STATUS: if (battery->state & 0x01) @@ -257,7 +262,7 @@ static int extract_package(struct acpi_battery *battery, union acpi_object *package, struct acpi_offsets *offsets, int num) { - int i, *x; + int i; union acpi_object *element; if (package->type != ACPI_TYPE_PACKAGE) return -EFAULT; @@ -266,16 +271,21 @@ static int extract_package(struct acpi_battery *battery, return -EFAULT; element = &package->package.elements[i]; if (offsets[i].mode) { - if (element->type != ACPI_TYPE_STRING && - element->type != ACPI_TYPE_BUFFER) - return -EFAULT; - strncpy((u8 *)battery + offsets[i].offset, - element->string.pointer, 32); + u8 *ptr = (u8 *)battery + offsets[i].offset; + if (element->type == ACPI_TYPE_STRING || + element->type == ACPI_TYPE_BUFFER) + strncpy(ptr, element->string.pointer, 32); + else if (element->type == ACPI_TYPE_INTEGER) { + strncpy(ptr, (u8 *)&element->integer.value, + sizeof(acpi_integer)); + ptr[sizeof(acpi_integer)] = 0; + } else return -EFAULT; } else { - if (element->type != ACPI_TYPE_INTEGER) - return -EFAULT; - x = (int *)((u8 *)battery + offsets[i].offset); - *x = element->integer.value; + if (element->type == ACPI_TYPE_INTEGER) { + int *x = (int *)((u8 *)battery + + offsets[i].offset); + *x = element->integer.value; + } else return -EFAULT; } } return 0; @@ -385,29 +395,81 @@ static int acpi_battery_init_alarm(struct acpi_battery *battery) return acpi_battery_set_alarm(battery); } +static ssize_t acpi_battery_alarm_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); + return sprintf(buf, "%d\n", battery->alarm * 1000); +} + +static ssize_t acpi_battery_alarm_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long x; + struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); + if (sscanf(buf, "%ld\n", &x) == 1) + battery->alarm = x/1000; + if (acpi_battery_present(battery)) + acpi_battery_set_alarm(battery); + return count; +} + +static struct device_attribute alarm_attr = { + .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE}, + .show = acpi_battery_alarm_show, + .store = acpi_battery_alarm_store, +}; + +static int sysfs_add_battery(struct acpi_battery *battery) +{ + int result; + + battery->update_time = 0; + result = acpi_battery_get_info(battery); + acpi_battery_init_alarm(battery); + if (result) + return result; + if (battery->power_unit) { + battery->bat.properties = charge_battery_props; + battery->bat.num_properties = + ARRAY_SIZE(charge_battery_props); + } else { + battery->bat.properties = energy_battery_props; + battery->bat.num_properties = + ARRAY_SIZE(energy_battery_props); + } + + battery->bat.name = acpi_device_bid(battery->device); + battery->bat.type = POWER_SUPPLY_TYPE_BATTERY; + battery->bat.get_property = acpi_battery_get_property; + + result = power_supply_register(&battery->device->dev, &battery->bat); + if (result) + return result; + return device_create_file(battery->bat.dev, &alarm_attr); +} + +static void sysfs_remove_battery(struct acpi_battery *battery) +{ + if (!battery->bat.dev) + return; + device_remove_file(battery->bat.dev, &alarm_attr); + power_supply_unregister(&battery->bat); +} + static int acpi_battery_update(struct acpi_battery *battery) { - int saved_present = acpi_battery_present(battery); int result = acpi_battery_get_status(battery); - if (result || !acpi_battery_present(battery)) + if (result) return result; - if (saved_present != acpi_battery_present(battery) || - !battery->update_time) { - battery->update_time = 0; - result = acpi_battery_get_info(battery); - if (result) - return result; - if (battery->power_unit) { - battery->bat.properties = charge_battery_props; - battery->bat.num_properties = - ARRAY_SIZE(charge_battery_props); - } else { - battery->bat.properties = energy_battery_props; - battery->bat.num_properties = - ARRAY_SIZE(energy_battery_props); - } - acpi_battery_init_alarm(battery); + if (!acpi_battery_present(battery)) { + sysfs_remove_battery(battery); + return 0; } + if (!battery->bat.dev) + sysfs_add_battery(battery); return acpi_battery_get_state(battery); } @@ -554,10 +616,6 @@ static ssize_t acpi_battery_write_alarm(struct file *file, if (!battery || (count > sizeof(alarm_string) - 1)) return -EINVAL; - if (result) { - result = -ENODEV; - goto end; - } if (!acpi_battery_present(battery)) { result = -ENODEV; goto end; @@ -688,33 +746,6 @@ static void acpi_battery_remove_fs(struct acpi_device *device) #endif -static ssize_t acpi_battery_alarm_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); - return sprintf(buf, "%d\n", battery->alarm * 1000); -} - -static ssize_t acpi_battery_alarm_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - unsigned long x; - struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); - if (sscanf(buf, "%ld\n", &x) == 1) - battery->alarm = x/1000; - if (acpi_battery_present(battery)) - acpi_battery_set_alarm(battery); - return count; -} - -static struct device_attribute alarm_attr = { - .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE}, - .show = acpi_battery_alarm_show, - .store = acpi_battery_alarm_store, -}; - /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -732,7 +763,9 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_netlink_event(device->pnp.device_class, device->dev.bus_id, event, acpi_battery_present(battery)); - kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE); + /* acpi_batter_update could remove power_supply object */ + if (battery->bat.dev) + kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE); } static int acpi_battery_add(struct acpi_device *device) @@ -756,11 +789,6 @@ static int acpi_battery_add(struct acpi_device *device) if (result) goto end; #endif - battery->bat.name = acpi_device_bid(device); - battery->bat.type = POWER_SUPPLY_TYPE_BATTERY; - battery->bat.get_property = acpi_battery_get_property; - result = power_supply_register(&battery->device->dev, &battery->bat); - result = device_create_file(battery->bat.dev, &alarm_attr); status = acpi_install_notify_handler(device->handle, ACPI_ALL_NOTIFY, acpi_battery_notify, battery); @@ -796,10 +824,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type) #ifdef CONFIG_ACPI_PROCFS acpi_battery_remove_fs(device); #endif - if (battery->bat.dev) { - device_remove_file(battery->bat.dev, &alarm_attr); - power_supply_unregister(&battery->bat); - } + sysfs_remove_battery(battery); mutex_destroy(&battery->lock); kfree(battery); return 0; @@ -813,6 +838,7 @@ static int acpi_battery_resume(struct acpi_device *device) return -EINVAL; battery = acpi_driver_data(device); battery->update_time = 0; + acpi_battery_update(battery); return 0; } diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index fb2cff9a2d2..49d432d0a12 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -198,12 +198,10 @@ int acpi_bus_set_power(acpi_handle handle, int state) return -ENODEV; } /* - * Get device's current power state if it's unknown - * This means device power state isn't initialized or previous setting failed + * Get device's current power state */ - if ((device->power.state == ACPI_STATE_UNKNOWN) || device->flags.force_power_state) - acpi_bus_get_power(device->handle, &device->power.state); - if ((state == device->power.state) && !device->flags.force_power_state) { + acpi_bus_get_power(device->handle, &device->power.state); + if (state == device->power.state) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n", state)); return 0; diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 301e832e696..24a7865a57c 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -78,6 +78,7 @@ MODULE_DEVICE_TABLE(acpi, button_device_ids); static int acpi_button_add(struct acpi_device *device); static int acpi_button_remove(struct acpi_device *device, int type); +static int acpi_button_resume(struct acpi_device *device); static int acpi_button_info_open_fs(struct inode *inode, struct file *file); static int acpi_button_state_open_fs(struct inode *inode, struct file *file); @@ -87,6 +88,7 @@ static struct acpi_driver acpi_button_driver = { .ids = button_device_ids, .ops = { .add = acpi_button_add, + .resume = acpi_button_resume, .remove = acpi_button_remove, }, }; @@ -253,6 +255,19 @@ static int acpi_button_remove_fs(struct acpi_device *device) /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ +static int acpi_lid_send_state(struct acpi_button *button) +{ + unsigned long state; + acpi_status status; + + status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, + &state); + if (ACPI_FAILURE(status)) + return -ENODEV; + /* input layer checks if event is redundant */ + input_report_switch(button->input, SW_LID, !state); + return 0; +} static void acpi_button_notify(acpi_handle handle, u32 event, void *data) { @@ -265,15 +280,8 @@ static void acpi_button_notify(acpi_handle handle, u32 event, void *data) switch (event) { case ACPI_BUTTON_NOTIFY_STATUS: input = button->input; - if (button->type == ACPI_BUTTON_TYPE_LID) { - struct acpi_handle *handle = button->device->handle; - unsigned long state; - - if (!ACPI_FAILURE(acpi_evaluate_integer(handle, "_LID", - NULL, &state))) - input_report_switch(input, SW_LID, !state); - + acpi_lid_send_state(button); } else { int keycode = test_bit(KEY_SLEEP, input->keybit) ? KEY_SLEEP : KEY_POWER; @@ -336,6 +344,17 @@ static int acpi_button_install_notify_handlers(struct acpi_button *button) return ACPI_FAILURE(status) ? -ENODEV : 0; } +static int acpi_button_resume(struct acpi_device *device) +{ + struct acpi_button *button; + if (!device) + return -EINVAL; + button = acpi_driver_data(device); + if (button && button->type == ACPI_BUTTON_TYPE_LID) + return acpi_lid_send_state(button); + return 0; +} + static void acpi_button_remove_notify_handlers(struct acpi_button *button) { switch (button->type) { @@ -453,6 +472,8 @@ static int acpi_button_add(struct acpi_device *device) error = input_register_device(input); if (error) goto err_remove_handlers; + if (button->type == ACPI_BUTTON_TYPE_LID) + acpi_lid_send_state(button); if (device->wakeup.flags.valid) { /* Button's GPE is run-wake GPE */ diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 7b4178393e3..06b78e5e33a 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -65,16 +65,18 @@ enum ec_command { /* EC events */ enum ec_event { ACPI_EC_EVENT_OBF_1 = 1, /* Output buffer full */ - ACPI_EC_EVENT_IBF_0, /* Input buffer empty */ + ACPI_EC_EVENT_IBF_0, /* Input buffer empty */ }; #define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */ #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ -static enum ec_mode { - EC_INTR = 1, /* Output buffer full */ - EC_POLL, /* Input buffer empty */ -} acpi_ec_mode = EC_INTR; +enum { + EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */ + EC_FLAGS_QUERY_PENDING, /* Query is pending */ + EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */ + EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */ +}; static int acpi_ec_remove(struct acpi_device *device, int type); static int acpi_ec_start(struct acpi_device *device); @@ -116,9 +118,8 @@ static struct acpi_ec { unsigned long command_addr; unsigned long data_addr; unsigned long global_lock; + unsigned long flags; struct mutex lock; - atomic_t query_pending; - atomic_t event_count; wait_queue_head_t wait; struct list_head list; u8 handlers_installed; @@ -148,45 +149,54 @@ static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) outb(data, ec->data_addr); } -static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event, - unsigned old_count) +static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event) { - u8 status = acpi_ec_read_status(ec); - if (old_count == atomic_read(&ec->event_count)) + if (test_bit(EC_FLAGS_WAIT_GPE, &ec->flags)) return 0; if (event == ACPI_EC_EVENT_OBF_1) { - if (status & ACPI_EC_FLAG_OBF) + if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_OBF) return 1; } else if (event == ACPI_EC_EVENT_IBF_0) { - if (!(status & ACPI_EC_FLAG_IBF)) + if (!(acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)) return 1; } return 0; } -static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, - unsigned count, int force_poll) +static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) { - if (unlikely(force_poll) || acpi_ec_mode == EC_POLL) { + if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) && + likely(!force_poll)) { + if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event), + msecs_to_jiffies(ACPI_EC_DELAY))) + return 0; + clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); + if (acpi_ec_check_status(ec, event)) { + if (event == ACPI_EC_EVENT_OBF_1) { + /* miss OBF = 1 GPE, don't expect it anymore */ + printk(KERN_INFO PREFIX "missing OBF_1 confirmation," + "switching to degraded mode.\n"); + set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags); + } else { + /* missing GPEs, switch back to poll mode */ + printk(KERN_INFO PREFIX "missing IBF_1 confirmations," + "switch off interrupt mode.\n"); + clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); + } + return 0; + } + } else { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); + clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); while (time_before(jiffies, delay)) { - if (acpi_ec_check_status(ec, event, 0)) + if (acpi_ec_check_status(ec, event)) return 0; } - } else { - if (wait_event_timeout(ec->wait, - acpi_ec_check_status(ec, event, count), - msecs_to_jiffies(ACPI_EC_DELAY)) || - acpi_ec_check_status(ec, event, 0)) { - return 0; - } else { - printk(KERN_ERR PREFIX "acpi_ec_wait timeout," + } + printk(KERN_ERR PREFIX "acpi_ec_wait timeout," " status = %d, expect_event = %d\n", acpi_ec_read_status(ec), event); - } - } - return -ETIME; } @@ -196,39 +206,42 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, int force_poll) { int result = 0; - unsigned count = atomic_read(&ec->event_count); + set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); acpi_ec_write_cmd(ec, command); for (; wdata_len > 0; --wdata_len) { - result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll); + result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll); if (result) { printk(KERN_ERR PREFIX "write_cmd timeout, command = %d\n", command); goto end; } - count = atomic_read(&ec->event_count); + set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); acpi_ec_write_data(ec, *(wdata++)); } if (!rdata_len) { - result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll); + result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll); if (result) { printk(KERN_ERR PREFIX "finish-write timeout, command = %d\n", command); goto end; } - } else if (command == ACPI_EC_COMMAND_QUERY) { - atomic_set(&ec->query_pending, 0); - } + } else if (command == ACPI_EC_COMMAND_QUERY) + clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); for (; rdata_len > 0; --rdata_len) { - result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count, force_poll); + if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags)) + force_poll = 1; + result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll); if (result) { printk(KERN_ERR PREFIX "read timeout, command = %d\n", command); goto end; } - count = atomic_read(&ec->event_count); + /* Don't expect GPE after last read */ + if (rdata_len > 1) + set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); *(rdata++) = acpi_ec_read_data(ec); } end: @@ -258,10 +271,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command, } } - /* Make sure GPE is enabled before doing transaction */ - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); - - status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0); + status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0); if (status) { printk(KERN_ERR PREFIX "input buffer is not empty, aborting transaction\n"); @@ -435,9 +445,9 @@ EXPORT_SYMBOL_GPL(acpi_ec_add_query_handler); void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) { - struct acpi_ec_query_handler *handler; + struct acpi_ec_query_handler *handler, *tmp; mutex_lock(&ec->lock); - list_for_each_entry(handler, &ec->list, node) { + list_for_each_entry_safe(handler, tmp, &ec->list, node) { if (query_bit == handler->query_bit) { list_del(&handler->node); kfree(handler); @@ -476,23 +486,24 @@ static void acpi_ec_gpe_query(void *ec_cxt) static u32 acpi_ec_gpe_handler(void *data) { acpi_status status = AE_OK; - u8 value; struct acpi_ec *ec = data; - atomic_inc(&ec->event_count); - - if (acpi_ec_mode == EC_INTR) { + clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); + if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) wake_up(&ec->wait); - } - value = acpi_ec_read_status(ec); - if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) { - atomic_set(&ec->query_pending, 1); - status = - acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec); + if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_SCI) { + if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) + status = acpi_os_execute(OSL_EC_BURST_HANDLER, + acpi_ec_gpe_query, ec); + } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) { + /* this is non-query, must be confirmation */ + printk(KERN_INFO PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); + set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } - return status == AE_OK ? + return ACPI_SUCCESS(status) ? ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED; } @@ -641,13 +652,10 @@ static struct acpi_ec *make_acpi_ec(void) struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL); if (!ec) return NULL; - - atomic_set(&ec->query_pending, 1); - atomic_set(&ec->event_count, 1); + ec->flags = 1 << EC_FLAGS_QUERY_PENDING; mutex_init(&ec->lock); init_waitqueue_head(&ec->wait); INIT_LIST_HEAD(&ec->list); - return ec; } @@ -741,6 +749,8 @@ static int acpi_ec_add(struct acpi_device *device) acpi_ec_add_fs(device); printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); + printk(KERN_INFO PREFIX "driver started in %s mode\n", + (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll"); return 0; } @@ -833,7 +843,7 @@ static int acpi_ec_start(struct acpi_device *device) ret = ec_install_handlers(ec); /* EC is fully operational, allow queries */ - atomic_set(&ec->query_pending, 0); + clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); return ret; } @@ -924,20 +934,4 @@ static void __exit acpi_ec_exit(void) return; } -#endif /* 0 */ - -static int __init acpi_ec_set_intr_mode(char *str) -{ - int intr; - - if (!get_option(&str, &intr)) - return 0; - - acpi_ec_mode = (intr) ? EC_INTR : EC_POLL; - - printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling"); - - return 1; -} - -__setup("ec_intr=", acpi_ec_set_intr_mode); +#endif /* 0 */ diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index c81f6bdb68b..a5a5532db26 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -47,8 +47,6 @@ MODULE_LICENSE("GPL"); static int acpi_fan_add(struct acpi_device *device); static int acpi_fan_remove(struct acpi_device *device, int type); -static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state); -static int acpi_fan_resume(struct acpi_device *device); static const struct acpi_device_id fan_device_ids[] = { {"PNP0C0B", 0}, @@ -63,15 +61,9 @@ static struct acpi_driver acpi_fan_driver = { .ops = { .add = acpi_fan_add, .remove = acpi_fan_remove, - .suspend = acpi_fan_suspend, - .resume = acpi_fan_resume, }, }; -struct acpi_fan { - struct acpi_device * device; -}; - /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ @@ -80,12 +72,12 @@ static struct proc_dir_entry *acpi_fan_dir; static int acpi_fan_read_state(struct seq_file *seq, void *offset) { - struct acpi_fan *fan = seq->private; + struct acpi_device *device = seq->private; int state = 0; - if (fan) { - if (acpi_bus_get_power(fan->device->handle, &state)) + if (device) { + if (acpi_bus_get_power(device->handle, &state)) seq_printf(seq, "status: ERROR\n"); else seq_printf(seq, "status: %s\n", @@ -105,11 +97,10 @@ acpi_fan_write_state(struct file *file, const char __user * buffer, { int result = 0; struct seq_file *m = file->private_data; - struct acpi_fan *fan = m->private; + struct acpi_device *device = m->private; char state_string[12] = { '\0' }; - - if (!fan || (count > sizeof(state_string) - 1)) + if (count > sizeof(state_string) - 1) return -EINVAL; if (copy_from_user(state_string, buffer, count)) @@ -117,7 +108,7 @@ acpi_fan_write_state(struct file *file, const char __user * buffer, state_string[count] = '\0'; - result = acpi_bus_set_power(fan->device->handle, + result = acpi_bus_set_power(device->handle, simple_strtoul(state_string, NULL, 0)); if (result) return result; @@ -158,7 +149,7 @@ static int acpi_fan_add_fs(struct acpi_device *device) return -ENODEV; else { entry->proc_fops = &acpi_fan_state_ops; - entry->data = acpi_driver_data(device); + entry->data = device; entry->owner = THIS_MODULE; } @@ -191,14 +182,8 @@ static int acpi_fan_add(struct acpi_device *device) if (!device) return -EINVAL; - fan = kzalloc(sizeof(struct acpi_fan), GFP_KERNEL); - if (!fan) - return -ENOMEM; - - fan->device = device; strcpy(acpi_device_name(device), "Fan"); strcpy(acpi_device_class(device), ACPI_FAN_CLASS); - acpi_driver_data(device) = fan; result = acpi_bus_get_power(device->handle, &state); if (result) { @@ -206,10 +191,6 @@ static int acpi_fan_add(struct acpi_device *device) goto end; } - device->flags.force_power_state = 1; - acpi_bus_set_power(device->handle, state); - device->flags.force_power_state = 0; - result = acpi_fan_add_fs(device); if (result) goto end; @@ -227,53 +208,14 @@ static int acpi_fan_add(struct acpi_device *device) static int acpi_fan_remove(struct acpi_device *device, int type) { - struct acpi_fan *fan = NULL; - - if (!device || !acpi_driver_data(device)) return -EINVAL; - fan = acpi_driver_data(device); - acpi_fan_remove_fs(device); - kfree(fan); - return 0; } -static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state) -{ - if (!device) - return -EINVAL; - - acpi_bus_set_power(device->handle, ACPI_STATE_D0); - - return AE_OK; -} - -static int acpi_fan_resume(struct acpi_device *device) -{ - int result = 0; - int power_state = 0; - - if (!device) - return -EINVAL; - - result = acpi_bus_get_power(device->handle, &power_state); - if (result) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error reading fan power state\n")); - return result; - } - - device->flags.force_power_state = 1; - acpi_bus_set_power(device->handle, power_state); - device->flags.force_power_state = 0; - - return result; -} - static int __init acpi_fan_init(void) { int result = 0; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 57b9a2998fd..af1769a20c7 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -86,7 +86,6 @@ struct acpi_power_resource { acpi_bus_id name; u32 system_level; u32 order; - int state; struct mutex resource_lock; struct list_head reference; }; @@ -128,33 +127,31 @@ acpi_power_get_context(acpi_handle handle, return 0; } -static int acpi_power_get_state(struct acpi_power_resource *resource) +static int acpi_power_get_state(struct acpi_power_resource *resource, int *state) { acpi_status status = AE_OK; unsigned long sta = 0; - if (!resource) + if (!resource || !state) return -EINVAL; status = acpi_evaluate_integer(resource->device->handle, "_STA", NULL, &sta); if (ACPI_FAILURE(status)) return -ENODEV; - if (sta & 0x01) - resource->state = ACPI_POWER_RESOURCE_STATE_ON; - else - resource->state = ACPI_POWER_RESOURCE_STATE_OFF; + *state = (sta & 0x01)?ACPI_POWER_RESOURCE_STATE_ON: + ACPI_POWER_RESOURCE_STATE_OFF; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n", - resource->name, resource->state ? "on" : "off")); + resource->name, state ? "on" : "off")); return 0; } static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) { - int result = 0; + int result = 0, state1; struct acpi_power_resource *resource = NULL; u32 i = 0; @@ -168,11 +165,11 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) result = acpi_power_get_context(list->handles[i], &resource); if (result) return result; - result = acpi_power_get_state(resource); + result = acpi_power_get_state(resource, &state1); if (result) return result; - *state = resource->state; + *state = state1; if (*state != ACPI_POWER_RESOURCE_STATE_ON) break; @@ -186,7 +183,7 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) static int acpi_power_on(acpi_handle handle, struct acpi_device *dev) { - int result = 0; + int result = 0, state; int found = 0; acpi_status status = AE_OK; struct acpi_power_resource *resource = NULL; @@ -224,20 +221,14 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev) } mutex_unlock(&resource->resource_lock); - if (resource->state == ACPI_POWER_RESOURCE_STATE_ON) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already on\n", - resource->name)); - return 0; - } - status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); if (ACPI_FAILURE(status)) return -ENODEV; - result = acpi_power_get_state(resource); + result = acpi_power_get_state(resource, &state); if (result) return result; - if (resource->state != ACPI_POWER_RESOURCE_STATE_ON) + if (state != ACPI_POWER_RESOURCE_STATE_ON) return -ENOEXEC; /* Update the power resource's _device_ power state */ @@ -250,7 +241,7 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev) static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) { - int result = 0; + int result = 0, state; acpi_status status = AE_OK; struct acpi_power_resource *resource = NULL; struct list_head *node, *next; @@ -281,20 +272,14 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) } mutex_unlock(&resource->resource_lock); - if (resource->state == ACPI_POWER_RESOURCE_STATE_OFF) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already off\n", - resource->name)); - return 0; - } - status = acpi_evaluate_object(resource->device->handle, "_OFF", NULL, NULL); if (ACPI_FAILURE(status)) return -ENODEV; - result = acpi_power_get_state(resource); + result = acpi_power_get_state(resource, &state); if (result) return result; - if (resource->state != ACPI_POWER_RESOURCE_STATE_OFF) + if (state != ACPI_POWER_RESOURCE_STATE_OFF) return -ENOEXEC; /* Update the power resource's _device_ power state */ @@ -494,7 +479,7 @@ static struct proc_dir_entry *acpi_power_dir; static int acpi_power_seq_show(struct seq_file *seq, void *offset) { int count = 0; - int result = 0; + int result = 0, state; struct acpi_power_resource *resource = NULL; struct list_head *node, *next; struct acpi_power_reference *ref; @@ -505,12 +490,12 @@ static int acpi_power_seq_show(struct seq_file *seq, void *offset) if (!resource) goto end; - result = acpi_power_get_state(resource); + result = acpi_power_get_state(resource, &state); if (result) goto end; seq_puts(seq, "state: "); - switch (resource->state) { + switch (state) { case ACPI_POWER_RESOURCE_STATE_ON: seq_puts(seq, "on\n"); break; @@ -591,7 +576,7 @@ static int acpi_power_remove_fs(struct acpi_device *device) static int acpi_power_add(struct acpi_device *device) { - int result = 0; + int result = 0, state; acpi_status status = AE_OK; struct acpi_power_resource *resource = NULL; union acpi_object acpi_object; @@ -622,11 +607,11 @@ static int acpi_power_add(struct acpi_device *device) resource->system_level = acpi_object.power_resource.system_level; resource->order = acpi_object.power_resource.resource_order; - result = acpi_power_get_state(resource); + result = acpi_power_get_state(resource, &state); if (result) goto end; - switch (resource->state) { + switch (state) { case ACPI_POWER_RESOURCE_STATE_ON: device->power.state = ACPI_STATE_D0; break; @@ -643,7 +628,7 @@ static int acpi_power_add(struct acpi_device *device) goto end; printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device), - acpi_device_bid(device), resource->state ? "on" : "off"); + acpi_device_bid(device), state ? "on" : "off"); end: if (result) @@ -680,7 +665,7 @@ static int acpi_power_remove(struct acpi_device *device, int type) static int acpi_power_resume(struct acpi_device *device) { - int result = 0; + int result = 0, state; struct acpi_power_resource *resource = NULL; struct acpi_power_reference *ref; @@ -689,12 +674,12 @@ static int acpi_power_resume(struct acpi_device *device) resource = (struct acpi_power_resource *)acpi_driver_data(device); - result = acpi_power_get_state(resource); + result = acpi_power_get_state(resource, &state); if (result) return result; mutex_lock(&resource->resource_lock); - if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) && + if (state == ACPI_POWER_RESOURCE_STATE_OFF && !list_empty(&resource->reference)) { ref = container_of(resource->reference.next, struct acpi_power_reference, node); mutex_unlock(&resource->resource_lock); diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index f3d3867303e..2c0b6630f8b 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -167,8 +167,8 @@ static void acpi_pm_finish(void) { u32 acpi_state = acpi_target_sleep_state; - acpi_leave_sleep_state(acpi_state); acpi_disable_wakeup_device(acpi_state); + acpi_leave_sleep_state(acpi_state); /* reset firmware waking vector */ acpi_set_firmware_waking_vector((acpi_physical_address) 0); @@ -272,8 +272,8 @@ static void acpi_hibernation_finish(void) * enable it here. */ acpi_enable(); - acpi_leave_sleep_state(ACPI_STATE_S4); acpi_disable_wakeup_device(ACPI_STATE_S4); + acpi_leave_sleep_state(ACPI_STATE_S4); /* reset firmware waking vector */ acpi_set_firmware_waking_vector((acpi_physical_address) 0); @@ -410,6 +410,7 @@ static void acpi_power_off(void) /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk("%s called\n", __FUNCTION__); local_irq_disable(); + acpi_enable_wakeup_device(ACPI_STATE_S5); acpi_enter_sleep_state(ACPI_STATE_S5); } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63035d71a61..164c7d9514f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -704,8 +704,8 @@ static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) /** * ata_dev_enable_pm - enable SATA interface power management - * @device - device to enable ipm for - * @policy - the link power management policy + * @dev: device to enable power management + * @policy: the link power management policy * * Enable SATA Interface power management. This will enable * Device Interface Power Management (DIPM) for min_power @@ -735,9 +735,10 @@ enable_pm_out: return /* rc */; /* hopefully we can use 'rc' eventually */ } +#ifdef CONFIG_PM /** * ata_dev_disable_pm - disable SATA interface power management - * @device - device to enable ipm for + * @dev: device to disable power management * * Disable SATA Interface power management. This will disable * Device Interface Power Management (DIPM) without changing @@ -755,6 +756,7 @@ static void ata_dev_disable_pm(struct ata_device *dev) if (ap->ops->disable_pm) ap->ops->disable_pm(ap); } +#endif /* CONFIG_PM */ void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) { @@ -764,6 +766,7 @@ void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) ata_port_schedule_eh(ap); } +#ifdef CONFIG_PM static void ata_lpm_enable(struct ata_host *host) { struct ata_link *link; @@ -789,6 +792,7 @@ static void ata_lpm_disable(struct ata_host *host) ata_lpm_schedule(ap, ap->pm_policy); } } +#endif /* CONFIG_PM */ /** @@ -2300,6 +2304,10 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = ATA_MAX_SECTORS; } + if ((dev->class == ATA_DEV_ATAPI) && + (atapi_command_packet_set(id) == TYPE_TAPE)) + dev->max_sectors = ATA_MAX_SECTORS_TAPE; + if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); @@ -2743,17 +2751,27 @@ int sata_down_spd_limit(struct ata_link *link) static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) { - u32 spd, limit; + struct ata_link *host_link = &link->ap->link; + u32 limit, target, spd; + + limit = link->sata_spd_limit; - if (link->sata_spd_limit == UINT_MAX) - limit = 0; + /* Don't configure downstream link faster than upstream link. + * It doesn't speed up anything and some PMPs choke on such + * configuration. + */ + if (!ata_is_host_link(link) && host_link->sata_spd) + limit &= (1 << host_link->sata_spd) - 1; + + if (limit == UINT_MAX) + target = 0; else - limit = fls(link->sata_spd_limit); + target = fls(limit); spd = (*scontrol >> 4) & 0xf; - *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); + *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); - return spd != limit; + return spd != target; } /** @@ -2776,7 +2794,7 @@ int sata_set_spd_needed(struct ata_link *link) u32 scontrol; if (sata_scr_read(link, SCR_CONTROL, &scontrol)) - return 0; + return 1; return __sata_set_spd_needed(link, &scontrol); } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index fefea7470e5..ed8813b222a 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1747,6 +1747,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) { struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; unsigned int all_err_mask = 0; int tag, is_io = 0; u32 serror; @@ -1800,10 +1801,8 @@ static void ata_eh_link_autopsy(struct ata_link *link) qc->err_mask &= ~AC_ERR_OTHER; /* SENSE_VALID trumps dev/unknown error and revalidation */ - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { + if (qc->flags & ATA_QCFLAG_SENSE_VALID) qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); - ehc->i.action &= ~ATA_EH_REVALIDATE; - } /* accumulate error info */ ehc->i.dev = qc->dev; @@ -1816,21 +1815,28 @@ static void ata_eh_link_autopsy(struct ata_link *link) if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) ehc->i.action |= ATA_EH_SOFTRESET; - else if (all_err_mask) + else if ((is_io && all_err_mask) || + (!is_io && (all_err_mask & ~AC_ERR_DEV))) ehc->i.action |= ATA_EH_REVALIDATE; - /* if we have offending qcs and the associated failed device */ + /* If we have offending qcs and the associated failed device, + * perform per-dev EH action only on the offending device. + */ if (ehc->i.dev) { - /* speed down */ - ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io, - all_err_mask); - - /* perform per-dev EH action only on the offending device */ ehc->i.dev_action[ehc->i.dev->devno] |= ehc->i.action & ATA_EH_PERDEV_MASK; ehc->i.action &= ~ATA_EH_PERDEV_MASK; } + /* consider speeding down */ + dev = ehc->i.dev; + if (!dev && ata_link_max_devices(link) == 1 && + ata_dev_enabled(link->device)) + dev = link->device; + + if (dev) + ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask); + DPRINTK("EXIT\n"); } @@ -1879,7 +1885,9 @@ static void ata_eh_link_report(struct ata_link *link) for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link) + if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link || + ((qc->flags & ATA_QCFLAG_QUIET) && + qc->err_mask == AC_ERR_DEV)) continue; if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) continue; @@ -2064,16 +2072,19 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { + const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts); struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; unsigned int *classes = ehc->classes; + unsigned int lflags = link->flags; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); int try = 0; struct ata_device *dev; - unsigned long deadline; + unsigned long deadline, now; unsigned int tmp_action; ata_reset_fn_t reset; unsigned long flags; + u32 sstatus; int rc; /* about to reset */ @@ -2105,7 +2116,7 @@ int ata_eh_reset(struct ata_link *link, int classify, /* Determine which reset to use and record in ehc->i.action. * prereset() may examine and modify it. */ - if (softreset && (!hardreset || (!(link->flags & ATA_LFLAG_NO_SRST) && + if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) && !sata_set_spd_needed(link) && !(ehc->i.action & ATA_EH_HARDRESET)))) tmp_action = ATA_EH_SOFTRESET; @@ -2180,82 +2191,64 @@ int ata_eh_reset(struct ata_link *link, int classify, "follow-up softreset required " "but no softreset avaliable\n"); rc = -EINVAL; - goto out; + goto fail; } ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK); rc = ata_do_reset(link, reset, classes, deadline); - - if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN && - !(link->flags & ATA_LFLAG_ASSUME_CLASS)) { - ata_link_printk(link, KERN_ERR, - "classification failed\n"); - rc = -EINVAL; - goto out; - } } - /* if we skipped follow-up srst, clear rc */ - if (rc == -EAGAIN) - rc = 0; - - if (rc && rc != -ERESTART && try < ARRAY_SIZE(ata_eh_reset_timeouts)) { - unsigned long now = jiffies; - - if (time_before(now, deadline)) { - unsigned long delta = deadline - jiffies; - - ata_link_printk(link, KERN_WARNING, "reset failed " - "(errno=%d), retrying in %u secs\n", - rc, (jiffies_to_msecs(delta) + 999) / 1000); + /* -EAGAIN can happen if we skipped followup SRST */ + if (rc && rc != -EAGAIN) + goto fail; - while (delta) - delta = schedule_timeout_uninterruptible(delta); + /* was classification successful? */ + if (classify && classes[0] == ATA_DEV_UNKNOWN && + !(lflags & ATA_LFLAG_ASSUME_CLASS)) { + if (try < max_tries) { + ata_link_printk(link, KERN_WARNING, + "classification failed\n"); + rc = -EINVAL; + goto fail; } - if (rc == -EPIPE || - try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1) - sata_down_spd_limit(link); - if (hardreset) - reset = hardreset; - goto retry; + ata_link_printk(link, KERN_WARNING, + "classfication failed, assuming ATA\n"); + lflags |= ATA_LFLAG_ASSUME_ATA; } - if (rc == 0) { - u32 sstatus; + ata_link_for_each_dev(dev, link) { + /* After the reset, the device state is PIO 0 and the + * controller state is undefined. Reset also wakes up + * drives from sleeping mode. + */ + dev->pio_mode = XFER_PIO_0; + dev->flags &= ~ATA_DFLAG_SLEEPING; - ata_link_for_each_dev(dev, link) { - /* After the reset, the device state is PIO 0 - * and the controller state is undefined. - * Reset also wakes up drives from sleeping - * mode. - */ - dev->pio_mode = XFER_PIO_0; - dev->flags &= ~ATA_DFLAG_SLEEPING; + if (ata_link_offline(link)) + continue; - if (ata_link_offline(link)) - continue; + /* apply class override and convert UNKNOWN to NONE */ + if (lflags & ATA_LFLAG_ASSUME_ATA) + classes[dev->devno] = ATA_DEV_ATA; + else if (lflags & ATA_LFLAG_ASSUME_SEMB) + classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */ + else if (classes[dev->devno] == ATA_DEV_UNKNOWN) + classes[dev->devno] = ATA_DEV_NONE; + } - /* apply class override and convert UNKNOWN to NONE */ - if (link->flags & ATA_LFLAG_ASSUME_ATA) - classes[dev->devno] = ATA_DEV_ATA; - else if (link->flags & ATA_LFLAG_ASSUME_SEMB) - classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */ - else if (classes[dev->devno] == ATA_DEV_UNKNOWN) - classes[dev->devno] = ATA_DEV_NONE; - } + /* record current link speed */ + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0) + link->sata_spd = (sstatus >> 4) & 0xf; - /* record current link speed */ - if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0) - link->sata_spd = (sstatus >> 4) & 0xf; + if (postreset) + postreset(link, classes); - if (postreset) - postreset(link, classes); + /* reset successful, schedule revalidation */ + ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK); + ehc->i.action |= ATA_EH_REVALIDATE; - /* reset successful, schedule revalidation */ - ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK); - ehc->i.action |= ATA_EH_REVALIDATE; - } + rc = 0; out: /* clear hotplug flag */ ehc->i.flags &= ~ATA_EHI_HOTPLUGGED; @@ -2265,6 +2258,28 @@ int ata_eh_reset(struct ata_link *link, int classify, spin_unlock_irqrestore(ap->lock, flags); return rc; + + fail: + if (rc == -ERESTART || try >= max_tries) + goto out; + + now = jiffies; + if (time_before(now, deadline)) { + unsigned long delta = deadline - now; + + ata_link_printk(link, KERN_WARNING, "reset failed " + "(errno=%d), retrying in %u secs\n", + rc, (jiffies_to_msecs(delta) + 999) / 1000); + + while (delta) + delta = schedule_timeout_uninterruptible(delta); + } + + if (rc == -EPIPE || try == max_tries - 1) + sata_down_spd_limit(link); + if (hardreset) + reset = hardreset; + goto retry; } static int ata_eh_revalidate_and_attach(struct ata_link *link, @@ -2697,8 +2712,15 @@ void ata_eh_finish(struct ata_port *ap) /* FIXME: Once EH migration is complete, * generate sense data in this function, * considering both err_mask and tf. + * + * There's no point in retrying invalid + * (detected by libata) and non-IO device + * errors (rejected by device). Finish them + * immediately. */ - if (qc->err_mask & AC_ERR_INVALID) + if ((qc->err_mask & AC_ERR_INVALID) || + (!(qc->flags & ATA_QCFLAG_IO) && + qc->err_mask == AC_ERR_DEV)) ata_eh_qc_complete(qc); else ata_eh_qc_retry(qc); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 93bd36c1969..245057df69d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -120,7 +120,7 @@ static const struct { { MEDIUM_POWER, "medium_power" }, }; -const char *ata_scsi_lpm_get(enum link_pm policy) +static const char *ata_scsi_lpm_get(enum link_pm policy) { int i; @@ -1108,6 +1108,9 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) else tf->command = ATA_CMD_FLUSH; + /* flush is critical for IO integrity, consider it an IO command */ + qc->flags |= ATA_QCFLAG_IO; + return 0; } @@ -2764,8 +2767,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) */ qc->nbytes = scsi_bufflen(scmd); - /* request result TF */ - qc->flags |= ATA_QCFLAG_RESULT_TF; + /* request result TF and be quiet about device error */ + qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; return 0; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index b4c37b9e413..d015b4adcfe 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -34,7 +34,8 @@ enum { SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY), + ATA_FLAG_NCQ), + SATA_FSL_HOST_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY, SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ @@ -264,10 +265,11 @@ struct sata_fsl_host_priv { void __iomem *hcr_base; void __iomem *ssr_base; void __iomem *csr_base; + int irq; }; static inline unsigned int sata_fsl_tag(unsigned int tag, - void __iomem * hcr_base) + void __iomem *hcr_base) { /* We let libATA core do actual (queue) tag allocation */ @@ -306,7 +308,7 @@ static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp, pp->cmdslot[tag].prde_fis_len = cpu_to_le32((num_prde << 16) | (fis_len << 2)); pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03); - pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F))); + pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F)); VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n", pp->cmdslot[tag].cda, @@ -316,7 +318,7 @@ static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp, } static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, - u32 * ttl, dma_addr_t cmd_desc_paddr) + u32 *ttl, dma_addr_t cmd_desc_paddr) { struct scatterlist *sg; unsigned int num_prde = 0; @@ -353,7 +355,7 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, "s/g len unaligned : 0x%x\n", sg_len); if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) && - !ata_sg_is_last(sg, qc)) { + (qc->n_iter + 1 != qc->n_elem)) { VPRINTK("setting indirect prde\n"); prd_ptr_to_indirect_ext = prd; prd->dba = cpu_to_le32(indirect_ext_segment_paddr); @@ -404,7 +406,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) cd = (struct command_desc *)pp->cmdentry + tag; cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; - ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis); + ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis); VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", cd->cfis[0], cd->cfis[1], cd->cfis[2]); @@ -470,16 +472,10 @@ static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in, switch (sc_reg_in) { case SCR_STATUS: - sc_reg = 0; - break; case SCR_ERROR: - sc_reg = 1; - break; case SCR_CONTROL: - sc_reg = 2; - break; case SCR_ACTIVE: - sc_reg = 3; + sc_reg = sc_reg_in; break; default: return -EINVAL; @@ -487,7 +483,7 @@ static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in, VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg); - iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4)); + iowrite32(val, ssr_base + (sc_reg * 4)); return 0; } @@ -500,16 +496,10 @@ static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in, switch (sc_reg_in) { case SCR_STATUS: - sc_reg = 0; - break; case SCR_ERROR: - sc_reg = 1; - break; case SCR_CONTROL: - sc_reg = 2; - break; case SCR_ACTIVE: - sc_reg = 3; + sc_reg = sc_reg_in; break; default: return -EINVAL; @@ -517,7 +507,7 @@ static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in, VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg); - *val = ioread32((void __iomem *)ssr_base + (sc_reg * 4)); + *val = ioread32(ssr_base + (sc_reg * 4)); return 0; } @@ -571,7 +561,6 @@ static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd struct ata_port *ap) { struct sata_fsl_port_priv *pp = ap->private_data; - u8 fis[6 * 4]; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); @@ -579,8 +568,7 @@ static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd cd = pp->cmdentry + tag; - memcpy(fis, &cd->sfis, 6 * 4); /* should we use memcpy_from_io() */ - ata_tf_from_fis(fis, &pp->tf); + ata_tf_from_fis(cd->sfis, &pp->tf); } static u8 sata_fsl_check_status(struct ata_port *ap) @@ -664,6 +652,7 @@ static int sata_fsl_port_start(struct ata_port *ap) VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA)); +#ifdef CONFIG_MPC8315_DS /* * Workaround for 8315DS board 3gbps link-up issue, * currently limit SATA port to GEN1 speed @@ -676,6 +665,7 @@ static int sata_fsl_port_start(struct ata_port *ap) sata_fsl_scr_read(ap, SCR_CONTROL, &temp); dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n", temp); +#endif return 0; } @@ -728,9 +718,10 @@ static unsigned int sata_fsl_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class, +static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { + struct ata_port *ap = link->ap; struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; @@ -739,10 +730,6 @@ static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class, u8 *cfis; u32 Serror; int i = 0; - struct ata_queued_cmd qc; - u8 *buf; - dma_addr_t dma_address; - struct scatterlist *sg; unsigned long start_jiffies; DPRINTK("in xx_softreset\n"); @@ -811,7 +798,7 @@ try_offline_again: */ temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500); - if ((!(temp & 0x10)) || ata_port_offline(ap)) { + if ((!(temp & 0x10)) || ata_link_offline(link)) { ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); @@ -842,13 +829,10 @@ try_offline_again: * reached here, we can send a command to the target device */ - if (ap->sactive) - goto skip_srst_do_ncq_error_handling; - DPRINTK("Sending SRST/device reset\n"); - ata_tf_init(ap->device, &tf); - cfis = (u8 *) & pp->cmdentry->cfis; + ata_tf_init(link->device, &tf); + cfis = (u8 *) &pp->cmdentry->cfis; /* device reset/SRST is a control register update FIS, uses tag0 */ sata_fsl_setup_cmd_hdr_entry(pp, 0, @@ -912,76 +896,13 @@ try_offline_again: * command bit of the CCreg */ iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */ - goto check_device_signature; - -skip_srst_do_ncq_error_handling: - - VPRINTK("Sending read log ext(10h) command\n"); - - memset(&qc, 0, sizeof(struct ata_queued_cmd)); - ata_tf_init(ap->device, &tf); - - tf.command = ATA_CMD_READ_LOG_EXT; - tf.lbal = ATA_LOG_SATA_NCQ; - tf.nsect = 1; - tf.hob_nsect = 0; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_PIO; - - qc.tag = ATA_TAG_INTERNAL; - qc.scsicmd = NULL; - qc.ap = ap; - qc.dev = ap->device; - - qc.tf = tf; - qc.flags |= ATA_QCFLAG_RESULT_TF; - qc.dma_dir = DMA_FROM_DEVICE; - - buf = ap->sector_buf; - ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE); - - /* - * Need to DMA-map the memory buffer associated with the command - */ - - sg = qc.__sg; - dma_address = dma_map_single(ap->dev, qc.buf_virt, - sg->length, DMA_FROM_DEVICE); - - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; - - VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length); - - sata_fsl_qc_prep(&qc); - sata_fsl_qc_issue(&qc); - - temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); - if (temp & 0x1) { - VPRINTK("READ_LOG_EXT_10H issue failed\n"); - - VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n", - ioread32(CQ + hcr_base), - ioread32(CA + hcr_base), ioread32(CC + hcr_base)); - - sata_fsl_scr_read(ap, SCR_ERROR, &Serror); - - VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); - VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); - VPRINTK("Serror = 0x%x\n", Serror); - goto err; - } - - iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */ - - check_device_signature: DPRINTK("SATA FSL : Now checking device signature\n"); *class = ATA_DEV_NONE; /* Verify if SStatus indicates device presence */ - if (ata_port_online(ap)) { + if (ata_link_online(link)) { /* * if we are here, device presence has been detected, * 1st D2H FIS would have been received, but sfis in @@ -1002,25 +923,13 @@ err: return -EIO; } -static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class, - unsigned long deadline) -{ - int retval; - - retval = sata_std_hardreset(ap, class, deadline); - - DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval); - - return retval; -} - static void sata_fsl_error_handler(struct ata_port *ap) { DPRINTK("in xx_error_handler\n"); /* perform recovery */ - ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset, + ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset, ata_std_postreset); } @@ -1042,7 +951,8 @@ static void sata_fsl_irq_clear(struct ata_port *ap) static void sata_fsl_error_intr(struct ata_port *ap) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_link *link = &ap->link; + struct ata_eh_info *ehi = &link->eh_info; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, dereg, cereg = 0, SError = 0; @@ -1111,7 +1021,7 @@ static void sata_fsl_error_intr(struct ata_port *ap) } /* record error info */ - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, link->active_tag); if (qc) { sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap); @@ -1139,6 +1049,7 @@ static void sata_fsl_qc_complete(struct ata_queued_cmd *qc) static void sata_fsl_host_intr(struct ata_port *ap) { + struct ata_link *link = &ap->link; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, qc_active = 0; @@ -1161,7 +1072,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) return; } - if (ap->sactive) { /* only true for NCQ commands */ + if (link->sactive) { /* only true for NCQ commands */ int i; /* Read command completed register */ qc_active = ioread32(hcr_base + CC); @@ -1190,10 +1101,10 @@ static void sata_fsl_host_intr(struct ata_port *ap) } else if (ap->qc_active) { iowrite32(1, hcr_base + CC); - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, link->active_tag); DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n", - ap->active_tag, ioread32(hcr_base + CC)); + link->active_tag, ioread32(hcr_base + CC)); if (qc) { sata_fsl_qc_complete(qc); @@ -1312,15 +1223,9 @@ static struct scsi_host_template sata_fsl_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations sata_fsl_ops = { - .port_disable = ata_port_disable, - .check_status = sata_fsl_check_status, .check_altstatus = sata_fsl_check_status, .dev_select = ata_noop_dev_select, @@ -1330,8 +1235,6 @@ static const struct ata_port_operations sata_fsl_ops = { .qc_prep = sata_fsl_qc_prep, .qc_issue = sata_fsl_qc_issue, .irq_clear = sata_fsl_irq_clear, - .irq_on = ata_dummy_irq_on, - .irq_ack = ata_dummy_irq_ack, .scr_read = sata_fsl_scr_read, .scr_write = sata_fsl_scr_write, @@ -1348,6 +1251,7 @@ static const struct ata_port_operations sata_fsl_ops = { static const struct ata_port_info sata_fsl_port_info[] = { { .flags = SATA_FSL_HOST_FLAGS, + .link_flags = SATA_FSL_HOST_LFLAGS, .pio_mask = 0x1f, /* pio 0-4 */ .udma_mask = 0x7f, /* udma 0-6 */ .port_ops = &sata_fsl_ops, @@ -1398,6 +1302,7 @@ static int sata_fsl_probe(struct of_device *ofdev, dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n"); goto error_exit_with_cleanup; } + host_priv->irq = irq; /* allocate host structure */ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS); @@ -1444,7 +1349,7 @@ static int sata_fsl_remove(struct of_device *ofdev) dev_set_drvdata(&ofdev->dev, NULL); - irq_dispose_mapping(host->irq); + irq_dispose_mapping(host_priv->irq); iounmap(host_priv->hcr_base); kfree(host_priv); diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index deb26f04f2d..7914def54fa 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -2,6 +2,7 @@ * sata_promise.c - Promise SATA * * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Mikael Pettersson <mikpe@it.uu.se> * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * @@ -45,11 +46,12 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "2.10" +#define DRV_VERSION "2.11" enum { PDC_MAX_PORTS = 4, PDC_MMIO_BAR = 3, + PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */ /* register offsets */ PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */ @@ -157,7 +159,7 @@ static struct scsi_host_template pdc_ata_sht = { .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, + .sg_tablesize = PDC_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -240,7 +242,7 @@ static const struct ata_port_operations pdc_pata_ops = { }; static const struct ata_port_info pdc_port_info[] = { - /* board_2037x */ + [board_2037x] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_SATA_PATA, @@ -250,7 +252,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_old_sata_ops, }, - /* board_2037x_pata */ + [board_2037x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, /* pio0-4 */ @@ -259,7 +261,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_20319 */ + [board_20319] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_4_PORTS, @@ -269,7 +271,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_old_sata_ops, }, - /* board_20619 */ + [board_20619] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_4_PORTS, @@ -279,7 +281,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_2057x */ + [board_2057x] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA, @@ -289,7 +291,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_sata_ops, }, - /* board_2057x_pata */ + [board_2057x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_GEN_II, @@ -299,7 +301,7 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_40518 */ + [board_40518] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS, @@ -523,6 +525,84 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) memcpy(buf+31, cdb, cdb_len); } +/** + * pdc_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * Make sure hardware does not choke on it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void pdc_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + unsigned int idx; + const u32 SG_COUNT_ASIC_BUG = 41*4; + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + + idx = 0; + ata_for_each_sg(sg, qc) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + sg_len -= len; + addr += len; + } + } + + if (idx) { + u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len); + + if (len > SG_COUNT_ASIC_BUG) { + u32 addr; + + VPRINTK("Splitting last PRD.\n"); + + addr = le32_to_cpu(ap->prd[idx - 1].addr); + ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); + + addr = addr + len - SG_COUNT_ASIC_BUG; + len = SG_COUNT_ASIC_BUG; + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + } + + ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + } +} + static void pdc_qc_prep(struct ata_queued_cmd *qc) { struct pdc_port_priv *pp = qc->ap->private_data; @@ -532,7 +612,7 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) switch (qc->tf.protocol) { case ATA_PROT_DMA: - ata_qc_prep(qc); + pdc_fill_sg(qc); /* fall through */ case ATA_PROT_NODATA: @@ -548,11 +628,11 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI: - ata_qc_prep(qc); + pdc_fill_sg(qc); break; case ATA_PROT_ATAPI_DMA: - ata_qc_prep(qc); + pdc_fill_sg(qc); /*FALLTHROUGH*/ case ATA_PROT_ATAPI_NODATA: pdc_atapi_pkt(qc); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 3c481e0e0c0..187dcb02c68 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -265,11 +265,11 @@ static struct sil24_cerr_info { unsigned int err_mask, action; const char *desc; } sil24_cerr_db[] = { - [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + [0] = { AC_ERR_DEV, 0, "device error" }, - [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + [PORT_CERR_DEV] = { AC_ERR_DEV, 0, "device error via D2H FIS" }, - [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, + [PORT_CERR_SDB] = { AC_ERR_DEV, 0, "device error via SDB FIS" }, [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, "error in data FIS" }, diff --git a/drivers/base/core.c b/drivers/base/core.c index c1343414d28..3f4d6aa1399 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1228,18 +1228,18 @@ int device_rename(struct device *dev, char *new_name) sysfs_remove_link(&dev->parent->kobj, old_class_name); } } -#endif - +#else if (dev->class) { sysfs_remove_link(&dev->class->subsys.kobj, old_device_name); error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj, dev->bus_id); if (error) { - /* Uh... how to unravel this if restoring can fail? */ dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n", __FUNCTION__, error); } } +#endif + out: put_device(dev); diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index f22c253bc09..ccb1fa89de2 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -56,9 +56,9 @@ config AGP_AMD X on AMD Irongate, 761, and 762 chipsets. config AGP_AMD64 - tristate "AMD Opteron/Athlon64 on-CPU GART support" if !IOMMU + tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU depends on AGP && X86 - default y if IOMMU + default y if GART_IOMMU help This option gives you AGP support for the GLX component of X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d95662e9632..d8200ac8f8c 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -787,7 +787,7 @@ static void __exit agp_amd64_cleanup(void) /* On AMD64 the PCI driver needs to initialize this driver early for the IOMMU, so it has to be called via a backdoor. */ -#ifndef CONFIG_IOMMU +#ifndef CONFIG_GART_IOMMU module_init(agp_amd64_init); module_exit(agp_amd64_cleanup); #endif diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 0e328d387af..6883fcb79ad 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -218,7 +218,7 @@ static void cn_rx_skb(struct sk_buff *__skb) skb->len < nlh->nlmsg_len || nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) { kfree_skb(skb); - goto out; + return; } len = NLMSG_ALIGN(nlh->nlmsg_len); @@ -229,9 +229,6 @@ static void cn_rx_skb(struct sk_buff *__skb) if (err < 0) kfree_skb(skb); } - -out: - kfree_skb(__skb); } /* diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index fdf4106b817..d2fabe7863a 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -19,7 +19,6 @@ #include "cpuidle.h" DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices); -EXPORT_PER_CPU_SYMBOL_GPL(cpuidle_devices); DEFINE_MUTEX(cpuidle_lock); LIST_HEAD(cpuidle_detected_devices); diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c index bb699cb2dc5..70b59642a70 100644 --- a/drivers/cpuidle/governor.c +++ b/drivers/cpuidle/governor.c @@ -94,8 +94,6 @@ int cpuidle_register_governor(struct cpuidle_governor *gov) return ret; } -EXPORT_SYMBOL_GPL(cpuidle_register_governor); - /** * cpuidle_replace_governor - find a replacement governor * @exclude_rating: the rating that will be skipped while looking for @@ -138,4 +136,3 @@ void cpuidle_unregister_governor(struct cpuidle_governor *gov) mutex_unlock(&cpuidle_lock); } -EXPORT_SYMBOL_GPL(cpuidle_unregister_governor); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 9c91b0fd134..6a7d25fc247 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -43,7 +43,6 @@ comment "DMA Clients" config NET_DMA bool "Network: TCP receive copy offload" depends on DMA_ENGINE && NET - default y help This enables the use of DMA engines in the network stack to offload receive copy-to-user operations, freeing CPU cycles. diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 67588326ae5..c9b9081831d 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -984,8 +984,10 @@ static void bus_reset_tasklet(unsigned long data) */ if (ohci->next_config_rom != NULL) { - free_rom = ohci->config_rom; - free_rom_bus = ohci->config_rom_bus; + if (ohci->next_config_rom != ohci->config_rom) { + free_rom = ohci->config_rom; + free_rom_bus = ohci->config_rom_bus; + } ohci->config_rom = ohci->next_config_rom; ohci->config_rom_bus = ohci->next_config_rom_bus; ohci->next_config_rom = NULL; @@ -1161,19 +1163,30 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) * the right values in the bus reset tasklet. */ - ohci->next_config_rom = - dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE, - &ohci->next_config_rom_bus, GFP_KERNEL); - if (ohci->next_config_rom == NULL) - return -ENOMEM; + if (config_rom) { + ohci->next_config_rom = + dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE, + &ohci->next_config_rom_bus, + GFP_KERNEL); + if (ohci->next_config_rom == NULL) + return -ENOMEM; - memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE); - fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4); + memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE); + fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4); + } else { + /* + * In the suspend case, config_rom is NULL, which + * means that we just reuse the old config rom. + */ + ohci->next_config_rom = ohci->config_rom; + ohci->next_config_rom_bus = ohci->config_rom_bus; + } - ohci->next_header = config_rom[0]; + ohci->next_header = be32_to_cpu(ohci->next_config_rom[0]); ohci->next_config_rom[0] = 0; reg_write(ohci, OHCI1394_ConfigROMhdr, 0); - reg_write(ohci, OHCI1394_BusOptions, config_rom[2]); + reg_write(ohci, OHCI1394_BusOptions, + be32_to_cpu(ohci->next_config_rom[2])); reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus); reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000); @@ -1984,7 +1997,7 @@ static int pci_resume(struct pci_dev *pdev) return err; } - return ohci_enable(&ohci->card, ohci->config_rom, CONFIG_ROM_SIZE); + return ohci_enable(&ohci->card, NULL, 0); } #endif diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index dd332f28e08..0b27da7d749 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -297,7 +297,7 @@ static struct hid_usage *hidinput_find_key(struct hid_device *hid, static int hidinput_getkeycode(struct input_dev *dev, int scancode, int *keycode) { - struct hid_device *hid = dev->private; + struct hid_device *hid = input_get_drvdata(dev); struct hid_usage *usage; usage = hidinput_find_key(hid, scancode, 0); @@ -311,7 +311,7 @@ static int hidinput_getkeycode(struct input_dev *dev, int scancode, static int hidinput_setkeycode(struct input_dev *dev, int scancode, int keycode) { - struct hid_device *hid = dev->private; + struct hid_device *hid = input_get_drvdata(dev); struct hid_usage *usage; int old_keycode; @@ -1152,7 +1152,7 @@ int hidinput_connect(struct hid_device *hid) kfree(hidinput); input_free_device(input_dev); err_hid("Out of memory during hid input probe"); - return -1; + goto out_unwind; } input_set_drvdata(input_dev, hid); @@ -1186,15 +1186,25 @@ int hidinput_connect(struct hid_device *hid) * UGCI) cram a lot of unrelated inputs into the * same interface. */ hidinput->report = report; - input_register_device(hidinput->input); + if (input_register_device(hidinput->input)) + goto out_cleanup; hidinput = NULL; } } - if (hidinput) - input_register_device(hidinput->input); + if (hidinput && input_register_device(hidinput->input)) + goto out_cleanup; return 0; + +out_cleanup: + input_free_device(hidinput->input); + kfree(hidinput); +out_unwind: + /* unwind the ones we already registered */ + hidinput_disconnect(hid); + + return -1; } EXPORT_SYMBOL_GPL(hidinput_connect); diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 41a59a80e7e..a2552856476 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -129,6 +129,11 @@ #define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053 #define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058 +#define USB_VENDOR_ID_GOTOP 0x08f2 +#define USB_DEVICE_ID_SUPER_Q2 0x007f +#define USB_DEVICE_ID_GOGOPEN 0x00ce +#define USB_DEVICE_ID_PENPOWER 0x00f4 + #define USB_VENDOR_ID_GRIFFIN 0x077d #define USB_DEVICE_ID_POWERMATE 0x0410 #define USB_DEVICE_ID_SOUNDKNOB 0x04AA @@ -415,6 +420,9 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE }, diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 9837adcb17e..5fc4019956b 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -743,7 +743,7 @@ inval: static long hiddev_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct inode *inode = file->f_path.dentry->d_inode; - return hiddev_ioctl(inode, file, cmd, compat_ptr(arg)); + return hiddev_ioctl(inode, file, cmd, (unsigned long)compat_ptr(arg)); } #endif diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c index c39c70a8aa9..67798932095 100644 --- a/drivers/ieee1394/ieee1394_transactions.c +++ b/drivers/ieee1394/ieee1394_transactions.c @@ -235,7 +235,6 @@ int hpsb_packet_success(struct hpsb_packet *packet) packet->node_id); return -EAGAIN; } - BUG(); case ACK_BUSY_X: case ACK_BUSY_A: @@ -282,7 +281,6 @@ int hpsb_packet_success(struct hpsb_packet *packet) packet->ack_code, packet->node_id, packet->tcode); return -EAGAIN; } - BUG(); } struct hpsb_packet *hpsb_make_readpacket(struct hpsb_host *host, nodeid_t node, diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index d7f64525469..e8d5f6b6499 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -291,10 +291,10 @@ struct ib_fmr_pool *ib_create_fmr_pool(struct ib_pd *pd, atomic_set(&pool->flush_ser, 0); init_waitqueue_head(&pool->force_wait); - pool->thread = kthread_create(ib_fmr_cleanup_thread, - pool, - "ib_fmr(%s)", - device->name); + pool->thread = kthread_run(ib_fmr_cleanup_thread, + pool, + "ib_fmr(%s)", + device->name); if (IS_ERR(pool->thread)) { printk(KERN_WARNING PFX "couldn't start cleanup thread\n"); ret = PTR_ERR(pool->thread); diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c index bcfa3ccb555..e7c25dbbcdc 100644 --- a/drivers/infiniband/hw/ipath/ipath_eeprom.c +++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c @@ -538,7 +538,15 @@ static u8 flash_csum(struct ipath_flash *ifp, int adjust) u8 *ip = (u8 *) ifp; u8 csum = 0, len; - for (len = 0; len < ifp->if_length; len++) + /* + * Limit length checksummed to max length of actual data. + * Checksum of erased eeprom will still be bad, but we avoid + * reading past the end of the buffer we were passed. + */ + len = ifp->if_length; + if (len > sizeof(struct ipath_flash)) + len = sizeof(struct ipath_flash); + while (len--) csum += *ip++; csum -= ifp->if_csum; csum = ~csum; diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index 6a5dd5cd773..c61f9da2964 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -453,7 +453,7 @@ skip_ibchange: } static void handle_supp_msgs(struct ipath_devdata *dd, - unsigned supp_msgs, char msg[512]) + unsigned supp_msgs, char *msg, int msgsz) { /* * Print the message unless it's ibc status change only, which @@ -461,9 +461,9 @@ static void handle_supp_msgs(struct ipath_devdata *dd, */ if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) { int iserr; - iserr = ipath_decode_err(msg, sizeof msg, - dd->ipath_lasterror & - ~INFINIPATH_E_IBSTATUSCHANGED); + iserr = ipath_decode_err(msg, msgsz, + dd->ipath_lasterror & + ~INFINIPATH_E_IBSTATUSCHANGED); if (dd->ipath_lasterror & ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS)) @@ -492,8 +492,8 @@ static void handle_supp_msgs(struct ipath_devdata *dd, } static unsigned handle_frequent_errors(struct ipath_devdata *dd, - ipath_err_t errs, char msg[512], - int *noprint) + ipath_err_t errs, char *msg, + int msgsz, int *noprint) { unsigned long nc; static unsigned long nextmsg_time; @@ -512,7 +512,7 @@ static unsigned handle_frequent_errors(struct ipath_devdata *dd, nextmsg_time = nc + HZ * 3; } else if (supp_msgs) { - handle_supp_msgs(dd, supp_msgs, msg); + handle_supp_msgs(dd, supp_msgs, msg, msgsz); supp_msgs = 0; nmsgs = 0; } @@ -525,14 +525,14 @@ static unsigned handle_frequent_errors(struct ipath_devdata *dd, static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) { - char msg[512]; + char msg[128]; u64 ignore_this_time = 0; int i, iserr = 0; int chkerrpkts = 0, noprint = 0; unsigned supp_msgs; int log_idx; - supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint); + supp_msgs = handle_frequent_errors(dd, errs, msg, sizeof msg, &noprint); /* don't report errors that are masked */ errs &= ~dd->ipath_maskederrs; diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index 4b6b7ee8e5c..54c61a972de 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -630,11 +630,8 @@ bail:; void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe, enum ib_wc_status status) { - u32 last = qp->s_last; - - if (++last == qp->s_size) - last = 0; - qp->s_last = last; + unsigned long flags; + u32 last; /* See ch. 11.2.4.1 and 10.7.3.1 */ if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) || @@ -658,4 +655,11 @@ void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe, wc.port_num = 0; ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0); } + + spin_lock_irqsave(&qp->s_lock, flags); + last = qp->s_last; + if (++last >= qp->s_size) + last = 0; + qp->s_last = last; + spin_unlock_irqrestore(&qp->s_lock, flags); } diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 6b3322486b5..8cba9c532e6 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1282,7 +1282,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int size; int i; - spin_lock_irqsave(&qp->rq.lock, flags); + spin_lock_irqsave(&qp->sq.lock, flags); ind = qp->sq.head; @@ -1448,7 +1448,7 @@ out: (qp->sq.wqe_cnt - 1)); } - spin_unlock_irqrestore(&qp->rq.lock, flags); + spin_unlock_irqrestore(&qp->sq.lock, flags); return err; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 87610772a97..059cf92b60a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -60,7 +60,7 @@ static struct ib_qp_attr ipoib_cm_err_attr = { .qp_state = IB_QPS_ERR }; -#define IPOIB_CM_RX_DRAIN_WRID 0x7fffffff +#define IPOIB_CM_RX_DRAIN_WRID 0xffffffff static struct ib_send_wr ipoib_cm_rx_drain_wr = { .wr_id = IPOIB_CM_RX_DRAIN_WRID, diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 6dd375825a1..6e9d75bd2b1 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -120,6 +120,7 @@ static const struct xpad_device { { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, @@ -129,6 +130,7 @@ static const struct xpad_device { { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index 4941a9e61e9..43aaa5cebd1 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -24,7 +24,7 @@ MODULE_DESCRIPTION("PC Speaker beeper driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pcspkr"); -#ifdef CONFIG_X86 +#if defined(CONFIG_MIPS) || defined(CONFIG_X86) /* Use the global PIT lock ! */ #include <asm/i8253.h> #else diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index f132702d137..b4423a471f0 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -129,12 +129,12 @@ MODULE_DEVICE_TABLE (usb, atp_table); */ #define ATP_THRESHOLD 5 -/* MacBook Pro (Geyser 3 & 4) initialization constants */ -#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1 -#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9 -#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300 -#define ATP_GEYSER3_MODE_REQUEST_INDEX 0 -#define ATP_GEYSER3_MODE_VENDOR_VALUE 0x04 +/* Geyser initialization constants */ +#define ATP_GEYSER_MODE_READ_REQUEST_ID 1 +#define ATP_GEYSER_MODE_WRITE_REQUEST_ID 9 +#define ATP_GEYSER_MODE_REQUEST_VALUE 0x300 +#define ATP_GEYSER_MODE_REQUEST_INDEX 0 +#define ATP_GEYSER_MODE_VENDOR_VALUE 0x04 /* Structure to hold all of our device specific stuff */ struct atp { @@ -142,9 +142,11 @@ struct atp { struct usb_device * udev; /* usb device */ struct urb * urb; /* usb request block */ signed char * data; /* transferred data */ - int open; /* non-zero if opened */ - struct input_dev *input; /* input dev */ - int valid; /* are the sensors valid ? */ + struct input_dev * input; /* input dev */ + unsigned char open; /* non-zero if opened */ + unsigned char valid; /* are the sensors valid ? */ + unsigned char size_detect_done; + unsigned char overflowwarn; /* overflow warning printed? */ int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ /* current value of the sensors */ @@ -153,7 +155,6 @@ struct atp { signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; /* accumulated sensors */ int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; - int overflowwarn; /* overflow warning printed? */ int datalen; /* size of an USB urb transfer */ int idlecount; /* number of empty packets */ struct work_struct work; @@ -170,7 +171,7 @@ struct atp { #define dprintk(format, a...) \ do { \ - if (debug) printk(format, ##a); \ + if (debug) printk(KERN_DEBUG format, ##a); \ } while (0) MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann"); @@ -188,6 +189,15 @@ static int debug = 1; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activate debugging output"); +static inline int atp_is_fountain(struct atp *dev) +{ + u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct); + + return productId == FOUNTAIN_ANSI_PRODUCT_ID || + productId == FOUNTAIN_ISO_PRODUCT_ID || + productId == FOUNTAIN_TP_ONLY_PRODUCT_ID; +} + /* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */ static inline int atp_is_geyser_2(struct atp *dev) { @@ -211,52 +221,63 @@ static inline int atp_is_geyser_3(struct atp *dev) } /* - * By default Geyser 3 device sends standard USB HID mouse + * By default newer Geyser devices send standard USB HID mouse * packets (Report ID 2). This code changes device mode, so it * sends raw sensor reports (Report ID 5). */ -static int atp_geyser3_init(struct usb_device *udev) +static int atp_geyser_init(struct usb_device *udev) { char data[8]; int size; size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - ATP_GEYSER3_MODE_READ_REQUEST_ID, + ATP_GEYSER_MODE_READ_REQUEST_ID, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_VALUE, + ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); if (size != 8) { err("Could not do mode read request from device" - " (Geyser 3 mode)"); + " (Geyser Raw mode)"); return -EIO; } /* Apply the mode switch */ - data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; + data[0] = ATP_GEYSER_MODE_VENDOR_VALUE; size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - ATP_GEYSER3_MODE_WRITE_REQUEST_ID, + ATP_GEYSER_MODE_WRITE_REQUEST_ID, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_VALUE, + ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); if (size != 8) { err("Could not do mode write request to device" - " (Geyser 3 mode)"); + " (Geyser Raw mode)"); return -EIO; } return 0; } -/* Reinitialise the device if it's a geyser 3 */ +/* + * Reinitialise the device. This usually stops stream of empty packets + * coming from it. + */ static void atp_reinit(struct work_struct *work) { struct atp *dev = container_of(work, struct atp, work); struct usb_device *udev = dev->udev; + int retval; dev->idlecount = 0; - atp_geyser3_init(udev); + + atp_geyser_init(udev); + + retval = usb_submit_urb(dev->urb, GFP_ATOMIC); + if (retval) { + err("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); + } } static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, @@ -337,7 +358,7 @@ static void atp_complete(struct urb* urb) break; case -EOVERFLOW: if(!dev->overflowwarn) { - printk("appletouch: OVERFLOW with data " + printk(KERN_WARNING "appletouch: OVERFLOW with data " "length %d, actual length is %d\n", dev->datalen, dev->urb->actual_length); dev->overflowwarn = 1; @@ -426,15 +447,17 @@ static void atp_complete(struct urb* urb) dev->x_old = dev->y_old = -1; memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); - if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */ + if (dev->size_detect_done || + atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */ goto exit; /* 17" Powerbooks have extra X sensors */ - for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) { - if (!dev->xy_cur[i]) continue; + for (i = (atp_is_geyser_2(dev) ? 15 : 16); i < ATP_XSENSORS; i++) { + if (!dev->xy_cur[i]) + continue; - printk("appletouch: 17\" model detected.\n"); - if(atp_is_geyser_2(dev)) + printk(KERN_INFO "appletouch: 17\" model detected.\n"); + if (atp_is_geyser_2(dev)) input_set_abs_params(dev->input, ABS_X, 0, (20 - 1) * ATP_XFACT - 1, @@ -444,10 +467,10 @@ static void atp_complete(struct urb* urb) (ATP_XSENSORS - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - break; } + dev->size_detect_done = 1; goto exit; } @@ -479,7 +502,7 @@ static void atp_complete(struct urb* urb) dev->y_old = y; if (debug > 1) - printk("appletouch: X: %3d Y: %3d " + printk(KERN_DEBUG "appletouch: X: %3d Y: %3d " "Xz: %3d Yz: %3d\n", x, y, x_z, y_z); @@ -507,19 +530,25 @@ static void atp_complete(struct urb* urb) input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); - /* Many Geysers will continue to send packets continually after - the first touch unless reinitialised. Do so if it's been - idle for a while in order to avoid waking the kernel up - several hundred times a second */ - - if (!x && !y && !key) { - dev->idlecount++; - if (dev->idlecount == 10) { - dev->valid = 0; - schedule_work(&dev->work); - } - } else - dev->idlecount = 0; + /* + * Many Geysers will continue to send packets continually after + * the first touch unless reinitialised. Do so if it's been + * idle for a while in order to avoid waking the kernel up + * several hundred times a second. Re-initialization does not + * work on Fountain touchpads. + */ + if (!atp_is_fountain(dev)) { + if (!x && !y && !key) { + dev->idlecount++; + if (dev->idlecount == 10) { + dev->valid = 0; + schedule_work(&dev->work); + /* Don't resubmit urb here, wait for reinit */ + return; + } + } else + dev->idlecount = 0; + } exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); @@ -593,12 +622,12 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id else dev->datalen = 81; - if (atp_is_geyser_3(dev)) { + if (!atp_is_fountain(dev)) { /* switch to raw sensor mode */ - if (atp_geyser3_init(udev)) + if (atp_geyser_init(udev)) goto err_free_devs; - printk("appletouch Geyser 3 inited.\n"); + printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); } dev->urb = usb_alloc_urb(0, GFP_KERNEL); diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c index 655a3921743..26ec09529b5 100644 --- a/drivers/input/mouse/inport.c +++ b/drivers/input/mouse/inport.c @@ -144,7 +144,7 @@ static int __init inport_init(void) b = inb(INPORT_SIGNATURE_PORT); c = inb(INPORT_SIGNATURE_PORT); if (a == b || a != c) { - printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE); + printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE); err = -ENODEV; goto err_release_region; } diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c index b23a4f3ea5c..37e7c75b43b 100644 --- a/drivers/input/mouse/logibm.c +++ b/drivers/input/mouse/logibm.c @@ -134,7 +134,7 @@ static int __init logibm_init(void) udelay(100); if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { - printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); + printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); err = -ENODEV; goto err_release_region; } diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 6af199805ff..02b3ad8c082 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -944,11 +944,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) #endif /* __hppa__ */ -#if !defined(__mc68000__) /* Link error on m68k! */ -static void __exit hp_sdc_exit(void) -#else static void hp_sdc_exit(void) -#endif { write_lock_irq(&hp_sdc.lock); diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 285fca676a6..623eea2652c 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -741,7 +741,7 @@ int __devinit init_ivtv_i2c(struct ivtv *itv) return i2c_bit_add_bus(&itv->i2c_adap); } -void __devexit exit_ivtv_i2c(struct ivtv *itv) +void exit_ivtv_i2c(struct ivtv *itv) { IVTV_DEBUG_I2C("i2c exit\n"); diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h index 677c3292855..de6a0744229 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.h +++ b/drivers/media/video/ivtv/ivtv-i2c.h @@ -36,6 +36,6 @@ void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg); /* init + register i2c algo-bit adapter */ int __devinit init_ivtv_i2c(struct ivtv *itv); -void __devexit exit_ivtv_i2c(struct ivtv *itv); +void exit_ivtv_i2c(struct ivtv *itv); #endif diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d366a6cc1fd..c8d62c268b1 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -122,9 +122,6 @@ static int get_lcd_level(void) else fujitsu->brightness_changed = 0; - if (status < 0) - return status; - return fujitsu->brightness_level; } @@ -198,7 +195,7 @@ static struct platform_driver fujitsupf_driver = { /* ACPI device */ -int acpi_fujitsu_add(struct acpi_device *device) +static int acpi_fujitsu_add(struct acpi_device *device) { int result = 0; int state = 0; @@ -229,7 +226,7 @@ int acpi_fujitsu_add(struct acpi_device *device) return result; } -int acpi_fujitsu_remove(struct acpi_device *device, int type) +static int acpi_fujitsu_remove(struct acpi_device *device, int type) { ACPI_FUNCTION_TRACE("acpi_fujitsu_remove"); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index a25ee71998a..1654a333034 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -39,6 +39,7 @@ #define DRIVER_NAME "pxa2xx-mci" #define NR_SG 1 +#define CLKRT_OFF (~0) struct pxamci_host { struct mmc_host *mmc; @@ -371,6 +372,9 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) unsigned long rate = host->clkrate; unsigned int clk = rate / ios->clock; + if (host->clkrt == CLKRT_OFF) + clk_enable(host->clk); + /* * clk might result in a lower divisor than we * desire. check for that condition and adjust @@ -379,14 +383,16 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (rate / clk > ios->clock) clk <<= 1; host->clkrt = fls(clk) - 1; - clk_enable(host->clk); /* * we write clkrt on the next command */ } else { pxamci_stop_clock(host); - clk_disable(host->clk); + if (host->clkrt != CLKRT_OFF) { + host->clkrt = CLKRT_OFF; + clk_disable(host->clk); + } } if (host->power_mode != ios->power_mode) { @@ -498,6 +504,7 @@ static int pxamci_probe(struct platform_device *pdev) host->mmc = mmc; host->dma = -1; host->pdata = pdev->dev.platform_data; + host->clkrt = CLKRT_OFF; host->clk = clk_get(&pdev->dev, "MMCCLK"); if (IS_ERR(host->clk)) { diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 867cb7345b5..5f800a6dd97 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1883,9 +1883,7 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MPC52xx - select PPC_BESTCOMM - select PPC_BESTCOMM_FEC + depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC select CRC32 select PHYLIB ---help--- diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 53fe7ded5d5..084acfd6fc5 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -371,7 +371,6 @@ static void bf537_adjust_link(struct net_device *dev) if (phydev->speed != lp->old_speed) { #if defined(CONFIG_BFIN_MAC_RMII) u32 opmode = bfin_read_EMAC_OPMODE(); - bf537mac_disable(); switch (phydev->speed) { case 10: opmode |= RMII_10; @@ -386,7 +385,6 @@ static void bf537_adjust_link(struct net_device *dev) break; } bfin_write_EMAC_OPMODE(opmode); - bf537mac_enable(); #endif new_state = 1; diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 781ed996848..3b840283a9c 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -351,4 +351,12 @@ enum e1000_state_t { __E1000_DOWN }; +extern char e1000_driver_name[]; +extern const char e1000_driver_version[]; + +extern void e1000_power_up_phy(struct e1000_adapter *); +extern void e1000_set_ethtool_ops(struct net_device *netdev); +extern void e1000_check_options(struct e1000_adapter *adapter); + + #endif /* _E1000_H_ */ diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6c9a643426f..667f18bcc17 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -32,9 +32,6 @@ #include <asm/uaccess.h> -extern char e1000_driver_name[]; -extern char e1000_driver_version[]; - extern int e1000_up(struct e1000_adapter *adapter); extern void e1000_down(struct e1000_adapter *adapter); extern void e1000_reinit_locked(struct e1000_adapter *adapter); @@ -733,16 +730,16 @@ err_setup: #define REG_PATTERN_TEST(R, M, W) \ { \ - uint32_t pat, value; \ - uint32_t test[] = \ + uint32_t pat, val; \ + const uint32_t test[] = \ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ - for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \ + for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \ E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \ - value = E1000_READ_REG(&adapter->hw, R); \ - if (value != (test[pat] & W & M)) { \ + val = E1000_READ_REG(&adapter->hw, R); \ + if (val != (test[pat] & W & M)) { \ DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \ "0x%08X expected 0x%08X\n", \ - E1000_##R, value, (test[pat] & W & M)); \ + E1000_##R, val, (test[pat] & W & M)); \ *data = (adapter->hw.mac_type < e1000_82543) ? \ E1000_82542_##R : E1000_##R; \ return 1; \ @@ -752,12 +749,12 @@ err_setup: #define REG_SET_AND_CHECK(R, M, W) \ { \ - uint32_t value; \ + uint32_t val; \ E1000_WRITE_REG(&adapter->hw, R, W & M); \ - value = E1000_READ_REG(&adapter->hw, R); \ - if ((W & M) != (value & M)) { \ + val = E1000_READ_REG(&adapter->hw, R); \ + if ((W & M) != (val & M)) { \ DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\ - "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \ + "expected 0x%08X\n", E1000_##R, (val & M), (W & M)); \ *data = (adapter->hw.mac_type < e1000_82543) ? \ E1000_82542_##R : E1000_##R; \ return 1; \ @@ -1621,8 +1618,6 @@ e1000_get_sset_count(struct net_device *netdev, int sset) } } -extern void e1000_power_up_phy(struct e1000_adapter *); - static void e1000_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, uint64_t *data) @@ -1859,8 +1854,8 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) - data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); + if (!data) + data = INT_MAX; if (adapter->hw.mac_type < e1000_82571) { if (!adapter->blink_timer.function) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 8fa0fe4009d..7c6888c58c2 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -8607,7 +8607,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, DEBUGFUNC("e1000_read_ich8_data"); - if (size < 1 || size > 2 || data == 0x0 || + if (size < 1 || size > 2 || data == NULL || index > ICH_FLASH_LINEAR_ADDR_MASK) return error; @@ -8841,7 +8841,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the * bank size may be 4, 8 or 64 KBytes *****************************************************************************/ -int32_t +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) { union ich8_hws_flash_status hsfsts; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index f1ce348470c..72deff0d4d9 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -37,8 +37,8 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #define DRIVERNAPI "-NAPI" #endif #define DRV_VERSION "7.3.20-k2"DRIVERNAPI -char e1000_driver_version[] = DRV_VERSION; -static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; +const char e1000_driver_version[] = DRV_VERSION; +static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; /* e1000_pci_tbl - PCI Device ID Table * @@ -188,7 +188,6 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); -void e1000_set_ethtool_ops(struct net_device *netdev); static void e1000_enter_82542_rst(struct e1000_adapter *adapter); static void e1000_leave_82542_rst(struct e1000_adapter *adapter); static void e1000_tx_timeout(struct net_device *dev); @@ -213,8 +212,6 @@ static void e1000_shutdown(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif -extern void e1000_check_options(struct e1000_adapter *adapter); - #define COPYBREAK_DEFAULT 256 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT; module_param(copybreak, uint, 0644); diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index f485874a63f..e6565ce686b 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -46,7 +46,7 @@ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } #define E1000_PARAM(X, desc) \ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ - static int num_##X = 0; \ + static unsigned int num_##X; \ module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); @@ -198,9 +198,9 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); struct e1000_option { enum { enable_option, range_option, list_option } type; - char *name; - char *err; - int def; + const char *name; + const char *err; + int def; union { struct { /* range_option info */ int min; @@ -214,8 +214,9 @@ struct e1000_option { }; static int __devinit -e1000_validate_option(int *value, struct e1000_option *opt, - struct e1000_adapter *adapter) +e1000_validate_option(unsigned int *value, + const struct e1000_option *opt, + struct e1000_adapter *adapter) { if (*value == OPTION_UNSET) { *value = opt->def; @@ -348,7 +349,7 @@ e1000_check_options(struct e1000_adapter *adapter) }; if (num_XsumRX > bd) { - int rx_csum = XsumRX[bd]; + unsigned int rx_csum = XsumRX[bd]; e1000_validate_option(&rx_csum, &opt, adapter); adapter->rx_csum = rx_csum; } else { @@ -374,7 +375,7 @@ e1000_check_options(struct e1000_adapter *adapter) }; if (num_FlowControl > bd) { - int fc = FlowControl[bd]; + unsigned int fc = FlowControl[bd]; e1000_validate_option(&fc, &opt, adapter); adapter->hw.fc = adapter->hw.original_fc = fc; } else { @@ -506,7 +507,7 @@ e1000_check_options(struct e1000_adapter *adapter) }; if (num_SmartPowerDownEnable > bd) { - int spd = SmartPowerDownEnable[bd]; + unsigned int spd = SmartPowerDownEnable[bd]; e1000_validate_option(&spd, &opt, adapter); adapter->smart_power_down = spd; } else { @@ -522,7 +523,7 @@ e1000_check_options(struct e1000_adapter *adapter) }; if (num_KumeranLockLoss > bd) { - int kmrn_lock_loss = KumeranLockLoss[bd]; + unsigned int kmrn_lock_loss = KumeranLockLoss[bd]; e1000_validate_option(&kmrn_lock_loss, &opt, adapter); adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; } else { @@ -581,7 +582,7 @@ e1000_check_fiber_options(struct e1000_adapter *adapter) static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) { - int speed, dplx, an; + unsigned int speed, dplx, an; int bd = adapter->bd_number; { /* Speed */ diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index cf70522fc85..14141a55eaa 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -283,7 +283,7 @@ static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter) adapter->flags &= ~FLAG_HAS_WOL; /* quad ports only support WoL on port A */ if (adapter->flags & FLAG_IS_QUAD_PORT && - (!adapter->flags & FLAG_IS_QUAD_PORT_A)) + (!(adapter->flags & FLAG_IS_QUAD_PORT_A))) adapter->flags &= ~FLAG_HAS_WOL; break; diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 0666e62e9ad..6a39784e7ee 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1680,8 +1680,8 @@ static int e1000_phys_id(struct net_device *netdev, u32 data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) - data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + if (!data) + data = INT_MAX; if (adapter->hw.phy.type == e1000_phy_ife) { if (!adapter->blink_timer.function) { diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index e4e655efb23..332789238b9 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -52,10 +52,11 @@ MODULE_PARM_DESC(copybreak, */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } -#define E1000_PARAM(X, desc) \ - static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ - static int num_##X; \ - module_param_array_named(X, X, int, &num_##X, 0); \ +#define E1000_PARAM(X, desc) \ + static int __devinitdata X[E1000_MAX_NIC+1] \ + = E1000_PARAM_INIT; \ + static unsigned int num_##X; \ + module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); @@ -124,9 +125,9 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); struct e1000_option { enum { enable_option, range_option, list_option } type; - char *name; - char *err; - int def; + const char *name; + const char *err; + int def; union { struct { /* range_option info */ int min; @@ -139,8 +140,8 @@ struct e1000_option { } arg; }; -static int __devinit e1000_validate_option(int *value, - struct e1000_option *opt, +static int __devinit e1000_validate_option(unsigned int *value, + const struct e1000_option *opt, struct e1000_adapter *adapter) { if (*value == OPTION_UNSET) { @@ -213,7 +214,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } { /* Transmit Interrupt Delay */ - struct e1000_option opt = { + const struct e1000_option opt = { .type = range_option, .name = "Transmit Interrupt Delay", .err = "using default of " @@ -232,7 +233,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } } { /* Transmit Absolute Interrupt Delay */ - struct e1000_option opt = { + const struct e1000_option opt = { .type = range_option, .name = "Transmit Absolute Interrupt Delay", .err = "using default of " @@ -277,7 +278,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } } { /* Receive Absolute Interrupt Delay */ - struct e1000_option opt = { + const struct e1000_option opt = { .type = range_option, .name = "Receive Absolute Interrupt Delay", .err = "using default of " @@ -296,7 +297,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } } { /* Interrupt Throttling Rate */ - struct e1000_option opt = { + const struct e1000_option opt = { .type = range_option, .name = "Interrupt Throttling Rate (ints/sec)", .err = "using default of " @@ -344,7 +345,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } } { /* Smart Power Down */ - struct e1000_option opt = { + const struct e1000_option opt = { .type = enable_option, .name = "PHY Smart Power Down", .err = "defaulting to Disabled", @@ -352,7 +353,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) }; if (num_SmartPowerDownEnable > bd) { - int spd = SmartPowerDownEnable[bd]; + unsigned int spd = SmartPowerDownEnable[bd]; e1000_validate_option(&spd, &opt, adapter); if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd) @@ -360,7 +361,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } } { /* Kumeran Lock Loss Workaround */ - struct e1000_option opt = { + const struct e1000_option opt = { .type = enable_option, .name = "Kumeran Lock Loss Workaround", .err = "defaulting to Enabled", @@ -368,7 +369,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) }; if (num_KumeranLockLoss > bd) { - int kmrn_lock_loss = KumeranLockLoss[bd]; + unsigned int kmrn_lock_loss = KumeranLockLoss[bd]; e1000_validate_option(&kmrn_lock_loss, &opt, adapter); if (hw->mac.type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index fc1cf0b742b..a8a0ee220da 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -879,9 +879,9 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) "Error while parsing device node resource\n" ); return rv; } - if ((mem.end - mem.start + 1) != sizeof(struct mpc52xx_fec)) { + if ((mem.end - mem.start + 1) < sizeof(struct mpc52xx_fec)) { printk(KERN_ERR DRIVER_NAME - " - invalid resource size (%lx != %x), check mpc52xx_devices.c\n", + " - invalid resource size (%lx < %x), check mpc52xx_devices.c\n", (unsigned long)(mem.end - mem.start + 1), sizeof(struct mpc52xx_fec)); return -EINVAL; } diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 1eee8894c73..3d2e7217e9a 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -196,4 +196,11 @@ struct ixgb_adapter { uint32_t alloc_rx_buff_failed; boolean_t have_msi; }; + +/* Exported from other modules */ +extern void ixgb_check_options(struct ixgb_adapter *adapter); +extern void ixgb_set_ethtool_ops(struct net_device *netdev); +extern char ixgb_driver_name[]; +extern const char ixgb_driver_version[]; + #endif /* _IXGB_H_ */ diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index fddd5844168..a267dd86252 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -32,9 +32,6 @@ #include <asm/uaccess.h> -extern char ixgb_driver_name[]; -extern char ixgb_driver_version[]; - extern int ixgb_up(struct ixgb_adapter *adapter); extern void ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog); extern void ixgb_reset(struct ixgb_adapter *adapter); @@ -639,8 +636,8 @@ ixgb_phys_id(struct net_device *netdev, uint32_t data) { struct ixgb_adapter *adapter = netdev_priv(netdev); - if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) - data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); + if (!data) + data = INT_MAX; if(!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c index ecbf45861c6..2c6367ace3c 100644 --- a/drivers/net/ixgb/ixgb_hw.c +++ b/drivers/net/ixgb/ixgb_hw.c @@ -1174,7 +1174,7 @@ mac_addr_valid(uint8_t *mac_addr) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -boolean_t +static boolean_t ixgb_link_reset(struct ixgb_hw *hw) { boolean_t link_status = FALSE; @@ -1205,7 +1205,7 @@ ixgb_link_reset(struct ixgb_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +static void ixgb_optics_reset(struct ixgb_hw *hw) { if (hw->phy_type == ixgb_phy_type_txn17401) { diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index d444de58ba3..3021234b1e1 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -37,8 +37,8 @@ static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #define DRIVERNAPI "-NAPI" #endif #define DRV_VERSION "1.0.126-k2"DRIVERNAPI -char ixgb_driver_version[] = DRV_VERSION; -static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; +const char ixgb_driver_version[] = DRV_VERSION; +static const char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; /* ixgb_pci_tbl - PCI Device ID Table * @@ -104,7 +104,6 @@ static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter, static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter); #endif static void ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter); -void ixgb_set_ethtool_ops(struct net_device *netdev); static void ixgb_tx_timeout(struct net_device *dev); static void ixgb_tx_timeout_task(struct work_struct *work); static void ixgb_vlan_rx_register(struct net_device *netdev, @@ -123,9 +122,6 @@ static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev); static void ixgb_io_resume (struct pci_dev *pdev); -/* Exported from other modules */ -extern void ixgb_check_options(struct ixgb_adapter *adapter); - static struct pci_error_handlers ixgb_err_handler = { .error_detected = ixgb_io_error_detected, .slot_reset = ixgb_io_slot_reset, @@ -1085,7 +1081,8 @@ ixgb_set_multi(struct net_device *netdev) rctl |= IXGB_RCTL_MPE; IXGB_WRITE_REG(hw, RCTL, rctl); } else { - uint8_t mta[netdev->mc_count * IXGB_ETH_LENGTH_OF_ADDRESS]; + uint8_t mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES * + IXGB_ETH_LENGTH_OF_ADDRESS]; IXGB_WRITE_REG(hw, RCTL, rctl); @@ -1324,8 +1321,8 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, /* Workaround for premature desc write-backs * in TSO mode. Append 4-byte sentinel desc */ - if (unlikely(mss && !nr_frags && size == len - && size > 8)) + if (unlikely(mss && (f == (nr_frags - 1)) + && size == len && size > 8)) size -= 4; buffer_info->length = size; diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c index 5d5ddabf436..865d14d6e5a 100644 --- a/drivers/net/ixgb/ixgb_param.c +++ b/drivers/net/ixgb/ixgb_param.c @@ -44,10 +44,11 @@ */ #define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET } -#define IXGB_PARAM(X, desc) \ - static int __devinitdata X[IXGB_MAX_NIC+1] = IXGB_PARAM_INIT; \ - static int num_##X = 0; \ - module_param_array_named(X, X, int, &num_##X, 0); \ +#define IXGB_PARAM(X, desc) \ + static int __devinitdata X[IXGB_MAX_NIC+1] \ + = IXGB_PARAM_INIT; \ + static unsigned int num_##X = 0; \ + module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); /* Transmit Descriptor Count @@ -178,8 +179,8 @@ IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable"); struct ixgb_option { enum { enable_option, range_option, list_option } type; - char *name; - char *err; + const char *name; + const char *err; int def; union { struct { /* range_option info */ @@ -197,7 +198,7 @@ struct ixgb_option { }; static int __devinit -ixgb_validate_option(int *value, struct ixgb_option *opt) +ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) { if(*value == OPTION_UNSET) { *value = opt->def; @@ -266,7 +267,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) } { /* Transmit Descriptor Count */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Transmit Descriptors", .err = "using default of " __MODULE_STRING(DEFAULT_TXD), @@ -285,7 +286,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); } { /* Receive Descriptor Count */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Receive Descriptors", .err = "using default of " __MODULE_STRING(DEFAULT_RXD), @@ -304,7 +305,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); } { /* Receive Checksum Offload Enable */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = enable_option, .name = "Receive Checksum Offload", .err = "defaulting to Enabled", @@ -312,7 +313,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) }; if(num_XsumRX > bd) { - int rx_csum = XsumRX[bd]; + unsigned int rx_csum = XsumRX[bd]; ixgb_validate_option(&rx_csum, &opt); adapter->rx_csum = rx_csum; } else { @@ -328,7 +329,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) { ixgb_fc_full, "Flow Control Enabled" }, { ixgb_fc_default, "Flow Control Hardware Default" }}; - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", @@ -338,7 +339,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) }; if(num_FlowControl > bd) { - int fc = FlowControl[bd]; + unsigned int fc = FlowControl[bd]; ixgb_validate_option(&fc, &opt); adapter->hw.fc.type = fc; } else { @@ -346,7 +347,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) } } { /* Receive Flow Control High Threshold */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Rx Flow Control High Threshold", .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH), @@ -366,7 +367,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) "Ignoring RxFCHighThresh when no RxFC\n"); } { /* Receive Flow Control Low Threshold */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Rx Flow Control Low Threshold", .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL), @@ -386,7 +387,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) "Ignoring RxFCLowThresh when no RxFC\n"); } { /* Flow Control Pause Time Request*/ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Flow Control Pause Time Request", .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE), @@ -396,7 +397,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) }; if(num_FCReqTimeout > bd) { - int pause_time = FCReqTimeout[bd]; + unsigned int pause_time = FCReqTimeout[bd]; ixgb_validate_option(&pause_time, &opt); adapter->hw.fc.pause_time = pause_time; } else { @@ -419,7 +420,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) } } { /* Receive Interrupt Delay */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Receive Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), @@ -436,7 +437,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) } } { /* Transmit Interrupt Delay */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = range_option, .name = "Transmit Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), @@ -454,7 +455,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) } { /* Transmit Interrupt Delay Enable */ - struct ixgb_option opt = { + const struct ixgb_option opt = { .type = enable_option, .name = "Tx Interrupt Delay Enable", .err = "defaulting to Enabled", @@ -462,7 +463,7 @@ ixgb_check_options(struct ixgb_adapter *adapter) }; if(num_IntDelayEnable > bd) { - int ide = IntDelayEnable[bd]; + unsigned int ide = IntDelayEnable[bd]; ixgb_validate_option(&ide, &opt); adapter->tx_int_delay_enable = ide; } else { diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index c160a7d91e2..bc51432b8d2 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -244,7 +244,7 @@ extern struct ixgbe_info ixgbe_82598EB_info; extern struct ixgbe_info ixgbe_82598AT_info; extern char ixgbe_driver_name[]; -extern char ixgbe_driver_version[]; +extern const char ixgbe_driver_version[]; extern int ixgbe_up(struct ixgbe_adapter *adapter); extern void ixgbe_down(struct ixgbe_adapter *adapter); diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 00ee20125ca..4d64673164c 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -30,8 +30,7 @@ #include <linux/delay.h> #include <linux/sched.h> -#include "ixgbe_type.h" -#include "ixgbe_common.h" +#include "ixgbe.h" #include "ixgbe_phy.h" #define IXGBE_82598_MAX_TX_QUEUES 32 diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index b75f1c6efc4..00bc525c656 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -45,12 +45,13 @@ #include "ixgbe_common.h" char ixgbe_driver_name[] = "ixgbe"; -static char ixgbe_driver_string[] = - "Intel(R) 10 Gigabit PCI Express Network Driver"; +static const char ixgbe_driver_string[] = + "Intel(R) 10 Gigabit PCI Express Network Driver"; #define DRV_VERSION "1.1.18" -char ixgbe_driver_version[] = DRV_VERSION; -static char ixgbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation."; +const char ixgbe_driver_version[] = DRV_VERSION; +static const char ixgbe_copyright[] = + "Copyright (c) 1999-2007 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598AF] = &ixgbe_82598AF_info, diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 366e62a2b1e..0f306ddb563 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1151,7 +1151,7 @@ static inline int myri10ge_clean_rx_done(struct myri10ge_priv *mgp, int budget) u16 length; __wsum checksum; - while (rx_done->entry[idx].length != 0 && work_done++ < budget) { + while (rx_done->entry[idx].length != 0 && work_done < budget) { length = ntohs(rx_done->entry[idx].length); rx_done->entry[idx].length = 0; checksum = csum_unfold(rx_done->entry[idx].checksum); @@ -1167,6 +1167,7 @@ static inline int myri10ge_clean_rx_done(struct myri10ge_priv *mgp, int budget) rx_bytes += rx_ok * (unsigned long)length; cnt++; idx = cnt & (myri10ge_max_intr_slots - 1); + work_done++; } rx_done->idx = idx; rx_done->cnt = cnt; @@ -1233,13 +1234,12 @@ static int myri10ge_poll(struct napi_struct *napi, int budget) struct myri10ge_priv *mgp = container_of(napi, struct myri10ge_priv, napi); struct net_device *netdev = mgp->dev; - struct myri10ge_rx_done *rx_done = &mgp->rx_done; int work_done; /* process as many rx events as NAPI will allow */ work_done = myri10ge_clean_rx_done(mgp, budget); - if (rx_done->entry[rx_done->idx].length == 0 || !netif_running(netdev)) { + if (work_done < budget || !netif_running(netdev)) { netif_rx_complete(netdev, napi); put_be32(htonl(3), mgp->irq_claim); } diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 8936ed3469c..a005d8f4c38 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -491,7 +491,7 @@ static int pppoe_create(struct net *net, struct socket *sock) int error = -ENOMEM; struct sock *sk; - sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppoe_sk_proto, 1); + sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppoe_sk_proto); if (!sk) goto out; diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 921d4ef6d14..f8904fd9236 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1416,7 +1416,7 @@ static int pppol2tp_create(struct net *net, struct socket *sock) int error = -ENOMEM; struct sock *sk; - sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto, 1); + sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto); if (!sk) goto out; diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index a2de32fabc1..2c685734b7a 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -586,6 +586,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0a46, 0x0268), /* ShanTou ST268 USB NIC */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x8515), /* ADMtek ADM8515 USB NIC */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 5ea877221f4..37c52e13175 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -142,9 +142,10 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ * To date internally, just copy this out to the user. */ case LMCIOCGINFO: /*fold01*/ - if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof (lmc_ctl_t))) - return -EFAULT; - ret = 0; + if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof(lmc_ctl_t))) + ret = -EFAULT; + else + ret = 0; break; case LMCIOCSINFO: /*fold01*/ @@ -159,8 +160,10 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; } - if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t))) - return -EFAULT; + if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) { + ret = -EFAULT; + break; + } sc->lmc_media->set_status (sc, &ctl); @@ -190,8 +193,10 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; } - if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) - return -EFAULT; + if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) { + ret = -EFAULT; + break; + } if (new_type == old_type) @@ -229,9 +234,10 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ sc->lmc_xinfo.Magic1 = 0xDEADBEEF; if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo, - sizeof (struct lmc_xinfo))) - return -EFAULT; - ret = 0; + sizeof(struct lmc_xinfo))) + ret = -EFAULT; + else + ret = 0; break; @@ -262,9 +268,9 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ if (copy_to_user(ifr->ifr_data, &sc->stats, sizeof (struct lmc_statistics))) - return -EFAULT; - - ret = 0; + ret = -EFAULT; + else + ret = 0; break; case LMCIOCCLEARLMCSTATS: /*fold01*/ @@ -292,8 +298,10 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; } - if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t))) - return -EFAULT; + if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) { + ret = -EFAULT; + break; + } sc->lmc_media->set_circuit_type(sc, ctl.circuit_type); sc->ictl.circuit_type = ctl.circuit_type; ret = 0; @@ -318,12 +326,15 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ #ifdef DEBUG case LMCIOCDUMPEVENTLOG: - if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof (u32))) - return -EFAULT; + if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof(u32))) { + ret = -EFAULT; + break; + } if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf))) - return -EFAULT; + ret = -EFAULT; + else + ret = 0; - ret = 0; break; #endif /* end ifdef _DBG_EVENTLOG */ case LMCIOCT1CONTROL: /*fold01*/ @@ -346,8 +357,10 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ */ netif_stop_queue(dev); - if (copy_from_user(&xc, ifr->ifr_data, sizeof (struct lmc_xilinx_control))) - return -EFAULT; + if (copy_from_user(&xc, ifr->ifr_data, sizeof(struct lmc_xilinx_control))) { + ret = -EFAULT; + break; + } switch(xc.command){ case lmc_xilinx_reset: /*fold02*/ { diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 25cfc6c3250..8d52a26c248 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -96,8 +96,8 @@ config IWL4965 If you want to compile the driver as a module ( = code which can be inserted in and remvoed from the running kernel whenever you want), - say M here and read <file:Documentation/modules.txt>. The module - will be called iwl4965.ko. + say M here and read <file:Documentation/kbuild/modules.txt>. The + module will be called iwl4965.ko. config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection" @@ -124,5 +124,5 @@ config IWL3945 If you want to compile the driver as a module ( = code which can be inserted in and remvoed from the running kernel whenever you want), - say M here and read <file:Documentation/modules.txt>. The module - will be called iwl3945.ko. + say M here and read <file:Documentation/kbuild/modules.txt>. The + module will be called iwl3945.ko. diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 9b35259eecf..e079a5237c9 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -34,7 +34,7 @@ #include "intel-iommu.h" #include <asm/proto.h> /* force_iommu in this header in x86-64*/ #include <asm/cacheflush.h> -#include <asm/iommu.h> +#include <asm/gart.h> #include "pci.h" #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) @@ -749,8 +749,8 @@ static char *fault_reason_strings[] = char *dmar_get_fault_reason(u8 fault_reason) { - if (fault_reason > MAX_FAULT_REASON_IDX) - return fault_reason_strings[MAX_FAULT_REASON_IDX]; + if (fault_reason >= MAX_FAULT_REASON_IDX) + return fault_reason_strings[MAX_FAULT_REASON_IDX - 1]; else return fault_reason_strings[fault_reason]; } diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 8c1012b432b..e2041b4d0c8 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -542,8 +542,6 @@ static int s3c_rtc_probe(struct platform_device *pdev) /* RTC Power management control */ -static struct timespec s3c_rtc_delta; - static int ticnt_save; static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a5763c6e936..86cf10efb0c 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -172,12 +172,12 @@ config CHR_DEV_SCH don't need this for those tiny 6-slot cdrom changers. Media changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. If you have such hardware and want to use it with linux, say Y - here. Check <file:Documentation/scsi-changer.txt> for details. + here. Check <file:Documentation/scsi/scsi-changer.txt> for details. If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.txt> and - <file:Documentation/scsi.txt>. The module will be called ch.o. + <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. If unsure, say N. diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 21ba57155be..bb6550e3192 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -38,9 +38,7 @@ static inline int next_SCp(struct scsi_pointer *SCp) if (ret) { SCp->buffer++; SCp->buffers_residual--; - SCp->ptr = (char *) - (page_address(SCp->buffer->page) + - SCp->buffer->offset); + SCp->ptr = sg_virt(SCp->buffer); SCp->this_residual = SCp->buffer->length; } else { SCp->ptr = NULL; @@ -76,9 +74,7 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt) SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; - SCpnt->SCp.ptr = (char *) - (page_address(SCpnt->SCp.buffer->page) + - SCpnt->SCp.buffer->offset); + SCpnt->SCp.ptr = sg_virt(SCpnt->SCp.buffer); SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; SCpnt->SCp.phase = SCpnt->request_bufflen; diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 6846a6c38b6..7ad21925869 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -657,7 +657,15 @@ static void serial_txx9_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { - if (state == 0) + /* + * If oldstate was -1 this is called from + * uart_configure_port(). In this case do not initialize the + * port now, because the port was already initialized (for + * non-console port) or should not be initialized here (for + * console port). If we initialized the port here we lose + * serial console settings. + */ + if (state == 0 && oldstate != -1) serial_txx9_initialize(port); } diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index eb4ac47612a..316a746e008 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -434,7 +434,7 @@ int usb_sg_init ( if (dma) { io->urbs [i]->transfer_dma = sg_dma_address (sg + i); len = sg_dma_len (sg + i); -#if defined(CONFIG_HIGHMEM) || defined(CONFIG_IOMMU) +#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU) io->urbs[i]->transfer_buffer = NULL; #else io->urbs[i]->transfer_buffer = sg_virt(&sg[i]); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index fb9d8d0b2c0..cc4b60f899c 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1509,7 +1509,7 @@ config FB_VOODOO1 WARNING: Do not use any application that uses the 3D engine (namely glide) while using this driver. - Please read the <file:Documentation/fb/README-sstfb.txt> for supported + Please read the <file:Documentation/fb/sstfb.txt> for supported options and other important info support. config FB_VT8623 @@ -1807,7 +1807,7 @@ config FB_SM501 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called sm501fb. If you want to compile it as a module, - say M here and read <file:Documentation/modules.txt>. + say M here and read <file:Documentation/kbuild/modules.txt>. If unsure, say N. @@ -1892,9 +1892,7 @@ config FB_VIRTUAL If unsure, say N. -if ARCH_OMAP - source "drivers/video/omap/Kconfig" -endif +source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" source "drivers/video/display/Kconfig" diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index be1d57bf9dc..83ee3e75386 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -27,8 +27,6 @@ #include "ati_ids.h" -static void radeon_reinitialize_M10(struct radeonfb_info *rinfo); - /* * Workarounds for bugs in PC laptops: * - enable D2 sleep in some IBM Thinkpads @@ -39,6 +37,8 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo); */ #if defined(CONFIG_PM) && defined(CONFIG_X86) +static void radeon_reinitialize_M10(struct radeonfb_info *rinfo); + struct radeon_device_id { const char *ident; /* (arbitrary) Name */ const unsigned short subsystem_vendor; /* Subsystem Vendor ID */ diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig index f4fcf11b290..44408850e2e 100644 --- a/drivers/video/omap/Kconfig +++ b/drivers/video/omap/Kconfig @@ -1,6 +1,6 @@ config FB_OMAP tristate "OMAP frame buffer support (EXPERIMENTAL)" - depends on FB + depends on FB && ARCH_OMAP select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 6854fd6b971..9adbb4f9047 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -17,7 +17,8 @@ config W1_CON bool "Userspace communication over connector" default y --- help --- - This allows to communicate with userspace using connector [Documentation/connector]. + This allows to communicate with userspace using connector. For more + information see <file:Documentation/connector/connector.txt>. There are three types of messages between w1 core and userspace: 1. Events. They are generated each time new master or slave device found either due to automatic or requested search. diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 81db48f07ca..2792bc1a726 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -15,8 +15,8 @@ menuconfig WATCHDOG implementation entirely in software (which can sometimes fail to reboot the machine) and a driver for hardware watchdog boards, which are more robust and can also keep track of the temperature inside - your computer. For details, read <file:Documentation/watchdog/watchdog.txt> - in the kernel source. + your computer. For details, read + <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. The watchdog is usually used together with the watchdog daemon which is available from diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index c404fc69e7e..b481cc0e32e 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -31,7 +31,7 @@ static unsigned long ali_is_open; static char ali_expect_release; static struct pci_dev *ali_pci; static u32 ali_timeout_bits; /* stores the computed timeout */ -static spinlock_t ali_lock; /* Guards the hardware */ +static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */ /* module parameters */ static int timeout = WATCHDOG_TIMEOUT; @@ -398,8 +398,6 @@ static int __init watchdog_init(void) { int ret; - spin_lock_init(&ali_lock); - /* Check whether or not the hardware watchdog is there */ if (ali_find_watchdog() != 0) { return -ENODEV; diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 19db5302ba6..a61cbd48dc0 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -61,7 +61,7 @@ static int heartbeat = DEFAULT_HEARTBEAT; -static spinlock_t io_lock; +static DEFINE_SPINLOCK(io_lock); static unsigned long wdt_status; #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 @@ -200,8 +200,6 @@ static int davinci_wdt_probe(struct platform_device *pdev) int ret = 0, size; struct resource *res; - spin_lock_init(&io_lock); - if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) heartbeat = DEFAULT_HEARTBEAT; @@ -262,7 +260,7 @@ static int __init davinci_wdt_init(void) static void __exit davinci_wdt_exit(void) { - return platform_driver_unregister(&platform_wdt_driver); + platform_driver_unregister(&platform_wdt_driver); } module_init(davinci_wdt_init); diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index f236954d253..ca44fd9b19b 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -77,7 +77,7 @@ /* internal variables */ static void __iomem *BASEADDR; -static spinlock_t esb_lock; /* Guards the hardware */ +static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */ static unsigned long timer_alive; static struct pci_dev *esb_pci; static unsigned short triggered; /* The status of the watchdog upon boot */ @@ -456,8 +456,6 @@ static int __init watchdog_init (void) { int ret; - spin_lock_init(&esb_lock); - /* Check whether or not the hardware watchdog is there */ if (!esb_getdevice () || esb_pci == NULL) return -ENODEV; diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index cd5a565bc3a..a0e6809e369 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -35,10 +35,12 @@ * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, - * 82801HB (ICH8) : document number 313056-002, 313057-004, - * 82801HR (ICH8R) : document number 313056-002, 313057-004, - * 82801HH (ICH8DH) : document number 313056-002, 313057-004, - * 82801HO (ICH8DO) : document number 313056-002, 313057-004, + * 82801HB (ICH8) : document number 313056-003, 313057-009, + * 82801HR (ICH8R) : document number 313056-003, 313057-009, + * 82801HBM (ICH8M) : document number 313056-003, 313057-009, + * 82801HH (ICH8DH) : document number 313056-003, 313057-009, + * 82801HO (ICH8DO) : document number 313056-003, 313057-009, + * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, * 82801IB (ICH9) : document number 316972-001, 316973-001, * 82801IR (ICH9R) : document number 316972-001, 316973-001, * 82801IH (ICH9DH) : document number 316972-001, 316973-001, @@ -95,8 +97,10 @@ enum iTCO_chipsets { TCO_ICH7M, /* ICH7-M */ TCO_ICH7MDH, /* ICH7-M DH */ TCO_ICH8, /* ICH8 & ICH8R */ + TCO_ICH8ME, /* ICH8M-E */ TCO_ICH8DH, /* ICH8DH */ TCO_ICH8DO, /* ICH8DO */ + TCO_ICH8M, /* ICH8M */ TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ @@ -125,8 +129,10 @@ static struct { {"ICH7-M", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, + {"ICH8M-E", 2}, {"ICH8DH", 2}, {"ICH8DO", 2}, + {"ICH8M", 2}, {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, @@ -134,6 +140,15 @@ static struct { {NULL,0} }; +#define ITCO_PCI_DEVICE(dev, data) \ + .vendor = PCI_VENDOR_ID_INTEL, \ + .device = dev, \ + .subvendor = PCI_ANY_ID, \ + .subdevice = PCI_ANY_ID, \ + .class = 0, \ + .class_mask = 0, \ + .driver_data = data + /* * This data only exists for exporting the supported PCI ids * via MODULE_DEVICE_TABLE. We do not actually register a @@ -141,45 +156,47 @@ static struct { * functions that probably will be registered by other drivers. */ static struct pci_device_id iTCO_wdt_pci_tbl[] = { - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO }, - { PCI_VENDOR_ID_INTEL, 0x2918, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9 }, - { PCI_VENDOR_ID_INTEL, 0x2916, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9R }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9DH }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2674, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2675, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2676, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2677, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2678, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x2679, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x267a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x267b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x267c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x267d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x267e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, - { PCI_VENDOR_ID_INTEL, 0x267f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M )}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2673, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2674, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2675, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2676, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2677, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2678, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x2679, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x267a, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x267b, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x267c, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, + { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); @@ -300,6 +317,7 @@ static int iTCO_wdt_start(void) /* disable chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit()) { + spin_unlock(&iTCO_wdt_private.io_lock); printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); return -EIO; } @@ -590,7 +608,7 @@ static struct miscdevice iTCO_wdt_miscdev = { * Init & exit routines */ -static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev) +static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev) { int ret; u32 base_address; @@ -694,7 +712,7 @@ out: return ret; } -static void iTCO_wdt_cleanup(void) +static void __devexit iTCO_wdt_cleanup(void) { /* Stop the timer before we leave */ if (!nowayout) @@ -709,7 +727,7 @@ static void iTCO_wdt_cleanup(void) iTCO_wdt_private.ACPIBASE = 0; } -static int iTCO_wdt_probe(struct platform_device *dev) +static int __devinit iTCO_wdt_probe(struct platform_device *dev) { int found = 0; struct pci_dev *pdev = NULL; @@ -735,7 +753,7 @@ static int iTCO_wdt_probe(struct platform_device *dev) return 0; } -static int iTCO_wdt_remove(struct platform_device *dev) +static int __devexit iTCO_wdt_remove(struct platform_device *dev) { if (iTCO_wdt_private.ACPIBASE) iTCO_wdt_cleanup(); @@ -753,7 +771,7 @@ static void iTCO_wdt_shutdown(struct platform_device *dev) static struct platform_driver iTCO_wdt_driver = { .probe = iTCO_wdt_probe, - .remove = iTCO_wdt_remove, + .remove = __devexit_p(iTCO_wdt_remove), .shutdown = iTCO_wdt_shutdown, .suspend = iTCO_wdt_suspend, .resume = iTCO_wdt_resume, diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index c3a60f52ccb..4b89f401691 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -48,7 +48,7 @@ static struct platform_device *ibwdt_platform_device; static unsigned long ibwdt_is_open; -static spinlock_t ibwdt_lock; +static DEFINE_SPINLOCK(ibwdt_lock); static char expect_close; /* Module information */ @@ -308,8 +308,6 @@ static int __devinit ibwdt_probe(struct platform_device *dev) { int res; - spin_lock_init(&ibwdt_lock); - #if WDT_START != WDT_STOP if (!request_region(WDT_STOP, 1, "IB700 WDT")) { printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP); diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index 6d35bb112a5..e6e07b4575e 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -123,8 +123,8 @@ static void zf_ping(unsigned long data); static int zf_action = GEN_RESET; static unsigned long zf_is_open; static char zf_expect_close; -static spinlock_t zf_lock; -static spinlock_t zf_port_lock; +static DEFINE_SPINLOCK(zf_lock); +static DEFINE_SPINLOCK(zf_port_lock); static DEFINE_TIMER(zf_timer, zf_ping, 0, 0); static unsigned long next_heartbeat = 0; @@ -438,9 +438,6 @@ static int __init zf_init(void) zf_show_action(action); - spin_lock_init(&zf_lock); - spin_lock_init(&zf_port_lock); - if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){ printk(KERN_ERR "cannot reserve I/O ports at %d\n", ZF_IOBASE); diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index a0bf95fb976..6369f569517 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -56,7 +56,7 @@ static int prescale = 1; static unsigned int timeout_sec; static unsigned long wdt_is_open; -static spinlock_t wdt_spinlock; +static DEFINE_SPINLOCK(wdt_spinlock); static void mpc83xx_wdt_keepalive(void) { @@ -185,9 +185,6 @@ static int __devinit mpc83xx_wdt_probe(struct platform_device *dev) printk(KERN_INFO "WDT driver for MPC83xx initialized. " "mode:%s timeout=%d (%d seconds)\n", reset ? "reset":"interrupt", timeout, timeout_sec); - - spin_lock_init(&wdt_spinlock); - return 0; err_unmap: diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 3d3deae0d64..15e4f8887a9 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -61,7 +61,7 @@ static unsigned long timer_enabled = 0; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ -static spinlock_t io_lock; /* to guard the watchdog from io races */ +static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ static int nowayout = WATCHDOG_NOWAYOUT; @@ -561,8 +561,6 @@ static int __init pc87413_init(void) { int ret; - spin_lock_init(&io_lock); - printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT); /* request_region(io, 2, "pc87413"); */ diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 22f8873dd09..b04aa096a10 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -80,7 +80,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = DEFAULT_HEARTBEAT; -static spinlock_t io_lock; +static DEFINE_SPINLOCK(io_lock); static unsigned long wdt_status; #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 @@ -254,8 +254,6 @@ static int pnx4008_wdt_probe(struct platform_device *pdev) int ret = 0, size; struct resource *res; - spin_lock_init(&io_lock); - if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) heartbeat = DEFAULT_HEARTBEAT; @@ -335,7 +333,7 @@ static int __init pnx4008_wdt_init(void) static void __exit pnx4008_wdt_exit(void) { - return platform_driver_unregister(&platform_wdt_driver); + platform_driver_unregister(&platform_wdt_driver); } module_init(pnx4008_wdt_init); diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index 285d8528953..2ee2677f364 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -54,7 +54,7 @@ #include <asm/system.h> static unsigned long sbc8360_is_open; -static spinlock_t sbc8360_lock; +static DEFINE_SPINLOCK(sbc8360_lock); static char expect_close; #define PFX "sbc8360: " @@ -359,7 +359,6 @@ static int __init sbc8360_init(void) goto out_noreboot; } - spin_lock_init(&sbc8360_lock); res = misc_register(&sbc8360_miscdev); if (res) { printk(KERN_ERR PFX "failed to register misc device\n"); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 9670d47190d..32ccd7c89c7 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -74,7 +74,7 @@ static int io = -1; static int io_len = 2; /* for non plug and play */ static struct semaphore open_sem; static char expect_close; -static spinlock_t sc1200wdt_lock; /* io port access serialisation */ +static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */ #if defined CONFIG_PNP static int isapnp = 1; @@ -375,7 +375,6 @@ static int __init sc1200wdt_init(void) printk("%s\n", banner); - spin_lock_init(&sc1200wdt_lock); sema_init(&open_sem, 1); #if defined CONFIG_PNP diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index e8594c64d1e..2847324a2be 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -125,7 +125,7 @@ static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; -static spinlock_t wdt_spinlock; +static DEFINE_SPINLOCK(wdt_spinlock); /* * Whack the dog @@ -383,8 +383,6 @@ static int __init sc520_wdt_init(void) { int rc = -EBUSY; - spin_lock_init(&wdt_spinlock); - /* Check that the timeout value is within it's range ; if not reset to the default */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index d3cb0a76602..5d2b5ba6141 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -83,7 +83,7 @@ static unsigned long timer_enabled = 0; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ -static spinlock_t io_lock; /* to guard the watchdog from io races */ +static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ static int nowayout = WATCHDOG_NOWAYOUT; @@ -540,8 +540,6 @@ static int __init wb_smsc_wdt_init(void) { int ret; - spin_lock_init(&io_lock); - printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index df33b3b5a53..386492821fc 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -48,7 +48,7 @@ static unsigned long wdt_is_open; static char expect_close; -static spinlock_t io_lock; +static DEFINE_SPINLOCK(io_lock); /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2E; @@ -328,8 +328,6 @@ wdt_init(void) { int ret; - spin_lock_init(&io_lock); - printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.\n"); if (wdt_set_heartbeat(timeout)) { diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 51826c216d6..c622a0e6c9a 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -47,7 +47,7 @@ static unsigned long wdt_is_open; static char expect_close; -static spinlock_t io_lock; +static DEFINE_SPINLOCK(io_lock); /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2e; @@ -376,8 +376,6 @@ wdt_init(void) { int ret, i, found = 0; - spin_lock_init(&io_lock); - printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); if (wdt_io == 0) { diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c index 3c88fe18f4f..bcc9d48955d 100644 --- a/drivers/watchdog/w83877f_wdt.c +++ b/drivers/watchdog/w83877f_wdt.c @@ -94,7 +94,7 @@ static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; -static spinlock_t wdt_spinlock; +static DEFINE_SPINLOCK(wdt_spinlock); /* * Whack the dog @@ -350,8 +350,6 @@ static int __init w83877f_wdt_init(void) { int rc = -EBUSY; - spin_lock_init(&wdt_spinlock); - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ { timeout = WATCHDOG_TIMEOUT; diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c index 15796844289..b475529d247 100644 --- a/drivers/watchdog/w83977f_wdt.c +++ b/drivers/watchdog/w83977f_wdt.c @@ -50,7 +50,7 @@ static int timeoutW; /* timeout in watchdog counter units */ static unsigned long timer_alive; static int testmode; static char expect_close; -static spinlock_t spinlock; +static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); @@ -476,8 +476,6 @@ static int __init w83977f_wdt_init(void) printk(KERN_INFO PFX DRIVER_VERSION); - spin_lock_init(&spinlock); - /* * Check that the timeout value is within it's range ; * if not reset to the default diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 950905d3c39..9e368091f79 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -45,7 +45,7 @@ static unsigned long wafwdt_is_open; static char expect_close; -static spinlock_t wafwdt_lock; +static DEFINE_SPINLOCK(wafwdt_lock); /* * You must set these - there is no sane way to probe for this board. @@ -252,8 +252,6 @@ static int __init wafwdt_init(void) printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n"); - spin_lock_init(&wafwdt_lock); - if (timeout < 1 || timeout > 255) { timeout = WD_TIMO; printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n", diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 0a3de6a0244..53d0bb410df 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -253,7 +253,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) printk(KERN_CRIT "Possible fan fault.\n"); } #endif /* CONFIG_WDT_501 */ - if (!(status & WDC_SR_WCCR)) + if (!(status & WDC_SR_WCCR)) { #ifdef SOFTWARE_REBOOT #ifdef ONLY_TESTING printk(KERN_CRIT "Would Reboot.\n"); @@ -264,6 +264,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) #else printk(KERN_CRIT "Reset in 5ms.\n"); #endif + } return IRQ_HANDLED; } diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index 7d300ff7ab0..9b7f6b6edef 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -59,7 +59,7 @@ static int timeoutM; /* timeout in minutes */ static unsigned long timer_alive; static int testmode; static char expect_close; -static spinlock_t spinlock; +static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); @@ -448,8 +448,6 @@ static int __init wd977_init(void) printk(KERN_INFO PFX DRIVER_VERSION); - spin_lock_init(&spinlock); - /* Check that the timeout value is within it's range ; if not reset to the default */ if (wdt977_set_timeout(timeout)) { diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 6baf4ae42c9..1355608683e 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -74,7 +74,7 @@ static int dev_count; static struct semaphore open_sem; -static spinlock_t wdtpci_lock; +static DEFINE_SPINLOCK(wdtpci_lock); static char expect_close; static int io; @@ -298,7 +298,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) printk(KERN_CRIT PFX "Possible fan fault.\n"); } #endif /* CONFIG_WDT_501_PCI */ - if (!(status&WDC_SR_WCCR)) + if (!(status&WDC_SR_WCCR)) { #ifdef SOFTWARE_REBOOT #ifdef ONLY_TESTING printk(KERN_CRIT PFX "Would Reboot.\n"); @@ -309,6 +309,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) #else printk(KERN_CRIT PFX "Reset in 5ms.\n"); #endif + } return IRQ_HANDLED; } @@ -606,7 +607,6 @@ static int __devinit wdtpci_init_one (struct pci_dev *dev, } sema_init(&open_sem, 1); - spin_lock_init(&wdtpci_lock); irq = dev->irq; io = pci_resource_start (dev, 2); diff --git a/fs/Kconfig b/fs/Kconfig index cc28a69246a..c75c9540649 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -504,7 +504,7 @@ config INOTIFY including multiple file events, one-shot support, and unmount notification. - For more information, see Documentation/filesystems/inotify.txt + For more information, see <file:Documentation/filesystems/inotify.txt> If unsure, say Y. @@ -518,7 +518,7 @@ config INOTIFY_USER directories via a single open fd. Events are read from the file descriptor, which is also select()- and poll()-able. - For more information, see Documentation/filesystems/inotify.txt + For more information, see <file:Documentation/filesystems/inotify.txt> If unsure, say Y. @@ -1089,7 +1089,7 @@ config ECRYPT_FS depends on EXPERIMENTAL && KEYS && CRYPTO && NET help Encrypted filesystem that operates on the VFS layer. See - <file:Documentation/ecryptfs.txt> to learn more about + <file:Documentation/filesystems/ecryptfs.txt> to learn more about eCryptfs. Userspace components are required and can be obtained from <http://ecryptfs.sf.net>. diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index a4284ccac1f..bd26e4cbb99 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -322,7 +322,7 @@ static int dev_ifname32(unsigned int fd, unsigned int cmd, unsigned long arg) int err; uifr = compat_alloc_user_space(sizeof(struct ifreq)); - if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32))); + if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32))) return -EFAULT; err = sys_ioctl(fd, SIOCGIFNAME, (unsigned long)uifr); diff --git a/fs/locks.c b/fs/locks.c index 0127a284681..8b8388eca05 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -696,17 +696,28 @@ EXPORT_SYMBOL(posix_test_lock); * Note: the above assumption may not be true when handling lock requests * from a broken NFS client. But broken NFS clients have a lot more to * worry about than proper deadlock detection anyway... --okir + * + * However, the failure of this assumption (also possible in the case of + * multiple tasks sharing the same open file table) also means there's no + * guarantee that the loop below will terminate. As a hack, we give up + * after a few iterations. */ + +#define MAX_DEADLK_ITERATIONS 10 + static int posix_locks_deadlock(struct file_lock *caller_fl, struct file_lock *block_fl) { struct file_lock *fl; + int i = 0; next_task: if (posix_same_owner(caller_fl, block_fl)) return 1; list_for_each_entry(fl, &blocked_list, fl_link) { if (posix_same_owner(fl, block_fl)) { + if (i++ > MAX_DEADLK_ITERATIONS) + return 0; fl = fl->fl_next; block_fl = fl; goto next_task; diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c index cfdc7900d27..ad87cb01299 100644 --- a/fs/ntfs/aops.c +++ b/fs/ntfs/aops.c @@ -405,6 +405,15 @@ static int ntfs_readpage(struct file *file, struct page *page) retry_readpage: BUG_ON(!PageLocked(page)); + vi = page->mapping->host; + i_size = i_size_read(vi); + /* Is the page fully outside i_size? (truncate in progress) */ + if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >> + PAGE_CACHE_SHIFT)) { + zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); + ntfs_debug("Read outside i_size - truncated?"); + goto done; + } /* * This can potentially happen because we clear PageUptodate() during * ntfs_writepage() of MstProtected() attributes. @@ -413,7 +422,6 @@ retry_readpage: unlock_page(page); return 0; } - vi = page->mapping->host; ni = NTFS_I(vi); /* * Only $DATA attributes can be encrypted and only unnamed $DATA diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index 92dabdcf2b8..50d3b0c258e 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -179,10 +179,7 @@ int ntfs_map_runlist_nolock(ntfs_inode *ni, VCN vcn, ntfs_attr_search_ctx *ctx) * ntfs_mapping_pairs_decompress() fails. */ end_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn) + 1; - if (!a->data.non_resident.lowest_vcn && end_vcn == 1) - end_vcn = sle64_to_cpu(a->data.non_resident.allocated_size) >> - ni->vol->cluster_size_bits; - if (unlikely(vcn >= end_vcn)) { + if (unlikely(vcn && vcn >= end_vcn)) { err = -ENOENT; goto err_out; } diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c index d98daf59e0b..d1619d05eb2 100644 --- a/fs/ntfs/compress.c +++ b/fs/ntfs/compress.c @@ -561,6 +561,16 @@ int ntfs_read_compressed_block(struct page *page) read_unlock_irqrestore(&ni->size_lock, flags); max_page = ((i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT) - offset; + /* Is the page fully outside i_size? (truncate in progress) */ + if (xpage >= max_page) { + kfree(bhs); + kfree(pages); + zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); + ntfs_debug("Compressed read outside i_size - truncated?"); + SetPageUptodate(page); + unlock_page(page); + return 0; + } if (nr_pages < max_page) max_page = nr_pages; for (i = 0; i < max_page; i++, offset++) { diff --git a/fs/proc/array.c b/fs/proc/array.c index d80baaabf83..eba339ecba2 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -374,7 +374,8 @@ static cputime_t task_stime(struct task_struct *p) stime = nsec_to_clock_t(p->se.sum_exec_runtime) - cputime_to_clock_t(task_utime(p)); - return clock_t_to_cputime(stime); + p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime)); + return p->prev_stime; } #endif diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index 7a8ce9e98b3..337162935d2 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -132,7 +132,7 @@ struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd) * RETURNS: * Pointer to @sd on success, NULL on failure. */ -struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd) +static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd) { if (unlikely(!sd)) return NULL; @@ -161,7 +161,7 @@ struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd) * Put an active reference to @sd. This function is noop if @sd * is NULL. */ -void sysfs_put_active(struct sysfs_dirent *sd) +static void sysfs_put_active(struct sysfs_dirent *sd) { struct completion *cmpl; int v; diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h index f8417988f6b..ff17f8da9b4 100644 --- a/fs/sysfs/sysfs.h +++ b/fs/sysfs/sysfs.h @@ -103,8 +103,6 @@ extern const struct file_operations sysfs_dir_operations; extern const struct inode_operations sysfs_dir_inode_operations; struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd); -struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd); -void sysfs_put_active(struct sysfs_dirent *sd); struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd); void sysfs_put_active_two(struct sysfs_dirent *sd); void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt, diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 584cf12cc40..c78c04fd993 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -933,20 +933,19 @@ magic_found: goto again; } - /* Set sbi->s_flags here, used by ufs_get_fs_state() below */ - sbi->s_flags = flags; + sbi->s_flags = flags;/*after that line some functions use s_flags*/ ufs_print_super_stuff(sb, usb1, usb2, usb3); /* * Check, if file system was correctly unmounted. * If not, make it read only. */ - if ((((flags & UFS_ST_MASK) == UFS_ST_44BSD) || - ((flags & UFS_ST_MASK) == UFS_ST_OLD) || - ((flags & UFS_ST_MASK) == UFS_ST_SUN) || - ((flags & UFS_ST_MASK) == UFS_ST_SUNOS) || - ((flags & UFS_ST_MASK) == UFS_ST_SUNx86)) && - (ufs_get_fs_state(sb, usb1, usb3) == (UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time)))) { + if (((flags & UFS_ST_MASK) == UFS_ST_44BSD) || + ((flags & UFS_ST_MASK) == UFS_ST_OLD) || + (((flags & UFS_ST_MASK) == UFS_ST_SUN || + (flags & UFS_ST_MASK) == UFS_ST_SUNOS || + (flags & UFS_ST_MASK) == UFS_ST_SUNx86) && + (ufs_get_fs_state(sb, usb1, usb3) == (UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time))))) { switch(usb1->fs_clean) { case UFS_FSCLEAN: UFSD("fs is clean\n"); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 7b74b60a68a..19c3ead2a90 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -168,8 +168,7 @@ struct acpi_device_flags { u32 power_manageable:1; u32 performance_manageable:1; u32 wake_capable:1; /* Wakeup(_PRW) supported? */ - u32 force_power_state:1; - u32 reserved:19; + u32 reserved:20; }; /* File System */ diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index d96b10fd449..c0d7075982c 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -130,4 +130,7 @@ extern u8 at91_leds_cpu; extern u8 at91_leds_timer; extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + #endif diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h index ea24a0e0bfd..ff8de30b2fb 100644 --- a/include/asm-arm/arch-davinci/gpio.h +++ b/include/asm-arm/arch-davinci/gpio.h @@ -13,6 +13,9 @@ #ifndef __DAVINCI_GPIO_H #define __DAVINCI_GPIO_H +#include <linux/io.h> +#include <asm/hardware.h> + /* * basic gpio routines * diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h index 7513c7a3402..822a27cd786 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa300.h +++ b/include/asm-arm/arch-pxa/mfp-pxa300.h @@ -4,7 +4,7 @@ * PXA300/PXA310 specific MFP configuration definitions * * Copyright (C) 2007 Marvell International Ltd. - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h index ae8ba34194c..488a5bbc49e 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa320.h +++ b/include/asm-arm/arch-pxa/mfp-pxa320.h @@ -4,7 +4,7 @@ * PXA320 specific MFP configuration definitions * * Copyright (C) 2007 Marvell International Ltd. - * 2007-08-21: eric miao <eric.y.miao@gmail.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index 60291742ffd..ac4157af5a8 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h @@ -5,7 +5,7 @@ * * Copyright (C) 2007 Marvell International Ltd. * - * 2007-8-21: eric miao <eric.y.miao@gmail.com> + * 2007-8-21: eric miao <eric.miao@marvell.com> * initial version * * This program is free software; you can redistribute it and/or modify diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h index 16f5375e57b..9918aa46d9e 100644 --- a/include/asm-arm/flat.h +++ b/include/asm-arm/flat.h @@ -11,8 +11,9 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) 0 #endif /* __ARM_FLAT_H__ */ diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h index b824d371ae0..d742205ac17 100644 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ b/include/asm-arm/plat-s3c/regs-nand.h @@ -35,7 +35,7 @@ #define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) #define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) #define S3C2440_NFMECC1 S3C2410_NFREG(0x30) -#define S3C2440_NFSECC S3C24E10_NFREG(0x34) +#define S3C2440_NFSECC S3C2410_NFREG(0x34) #define S3C2440_NFSBLK S3C2410_NFREG(0x38) #define S3C2440_NFEBLK S3C2410_NFREG(0x3C) diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 14cb8d35924..0212e180b90 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -80,6 +80,7 @@ extern int atomic_sub32(void); extern int atomic_ior32(void); extern int atomic_and32(void); extern int atomic_xor32(void); +extern void safe_user_instruction(void); extern void sigreturn_stub(void); extern void *l1_data_A_sram_alloc(size_t); diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h index e6df84ee155..37db66c7030 100644 --- a/include/asm-blackfin/fixed_code.h +++ b/include/asm-blackfin/fixed_code.h @@ -17,4 +17,6 @@ #define ATOMIC_SEQS_END 0x480 -#define FIXED_CODE_END 0x480 +#define SAFE_USER_INSTRUCTION 0x480 + +#define FIXED_CODE_END 0x490 diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h index c97ab03e43a..8265ea473d5 100644 --- a/include/asm-blackfin/gptimers.h +++ b/include/asm-blackfin/gptimers.h @@ -197,6 +197,8 @@ uint32_t get_gptimer_period (int timer_id); uint32_t get_gptimer_count (int timer_id); uint16_t get_gptimer_intr (int timer_id); void clear_gptimer_intr (int timer_id); +uint16_t get_gptimer_over (int timer_id); +void clear_gptimer_over (int timer_id); void set_gptimer_config (int timer_id, uint16_t config); uint16_t get_gptimer_config (int timer_id); void set_gptimer_pulse_hi (int timer_id); diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h index d6c24c54699..fc69cf93f14 100644 --- a/include/asm-blackfin/mach-bf527/defBF52x_base.h +++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h @@ -1718,55 +1718,55 @@ /* Bit masks for HOST_CONTROL */ -#define HOST_EN 0x1 /* Host Enable */ -#define nHOST_EN 0x0 -#define HOST_END 0x2 /* Host Endianess */ -#define nHOST_END 0x0 -#define DATA_SIZE 0x4 /* Data Size */ -#define nDATA_SIZE 0x0 -#define HOST_RST 0x8 /* Host Reset */ -#define nHOST_RST 0x0 -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define nHRDY_OVR 0x0 -#define INT_MODE 0x40 /* Interrupt Mode */ -#define nINT_MODE 0x0 -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define nBT_EN 0x0 -#define EHW 0x100 /* Enable Host Write */ -#define nEHW 0x0 -#define EHR 0x200 /* Enable Host Read */ -#define nEHR 0x0 -#define BDR 0x400 /* Burst DMA Requests */ -#define nBDR 0x0 +#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */ +#define HOST_CNTR_nHOST_EN 0x0 +#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */ +#define HOST_CNTR_nHOST_END 0x0 +#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */ +#define HOST_CNTR_nDATA_SIZE 0x0 +#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */ +#define HOST_CNTR_nHOST_RST 0x0 +#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */ +#define HOST_CNTR_nHRDY_OVR 0x0 +#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */ +#define HOST_CNTR_nINT_MODE 0x0 +#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */ +#define HOST_CNTR_ nBT_EN 0x0 +#define HOST_CNTR_EHW 0x100 /* Enable Host Write */ +#define HOST_CNTR_nEHW 0x0 +#define HOST_CNTR_EHR 0x200 /* Enable Host Read */ +#define HOST_CNTR_nEHR 0x0 +#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */ +#define HOST_CNTR_nBDR 0x0 /* Bit masks for HOST_STATUS */ -#define READY 0x1 /* DMA Ready */ -#define nREADY 0x0 -#define FIFOFULL 0x2 /* FIFO Full */ -#define nFIFOFULL 0x0 -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define nFIFOEMPTY 0x0 -#define COMPLETE 0x8 /* DMA Complete */ -#define nCOMPLETE 0x0 -#define HSHK 0x10 /* Host Handshake */ -#define nHSHK 0x0 -#define TIMEOUT 0x20 /* Host Timeout */ -#define nTIMEOUT 0x0 -#define HIRQ 0x40 /* Host Interrupt Request */ -#define nHIRQ 0x0 -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define nALLOW_CNFG 0x0 -#define DMA_DIR 0x100 /* DMA Direction */ -#define nDMA_DIR 0x0 -#define BTE 0x200 /* Bus Timeout Enabled */ -#define nBTE 0x0 -#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ -#define nHOSTRD_DONE 0x0 +#define HOST_STAT_READY 0x1 /* DMA Ready */ +#define HOST_STAT_nREADY 0x0 +#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */ +#define HOST_STAT_nFIFOFULL 0x0 +#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */ +#define HOST_STAT_nFIFOEMPTY 0x0 +#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */ +#define HOST_STAT_nCOMPLETE 0x0 +#define HOST_STAT_HSHK 0x10 /* Host Handshake */ +#define HOST_STAT_nHSHK 0x0 +#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */ +#define HOST_STAT_nTIMEOUT 0x0 +#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */ +#define HOST_STAT_nHIRQ 0x0 +#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define HOST_STAT_nALLOW_CNFG 0x0 +#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */ +#define HOST_STAT_nDMA_DIR 0x0 +#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */ +#define HOST_STAT_nBTE 0x0 +#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ +#define HOST_STAT_nHOSTRD_DONE 0x0 /* Bit masks for HOST_TIMEOUT */ -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ +#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ /* Bit masks for CNT_CONFIG */ diff --git a/include/asm-blackfin/mach-bf527/dma.h b/include/asm-blackfin/mach-bf527/dma.h index a41627ae913..2dfee12864f 100644 --- a/include/asm-blackfin/mach-bf527/dma.h +++ b/include/asm-blackfin/mach-bf527/dma.h @@ -35,7 +35,6 @@ #define MAX_BLACKFIN_DMA_CHANNEL 16 #define CH_PPI 0 /* PPI receive/transmit or NFC */ -#define CH_NFC 0 /* PPI receive/transmit or NFC */ #define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */ #define CH_EMAC_HOSTDP 1 /* Ethernet MAC receive or HOSTDP */ #define CH_EMAC_TX 2 /* Ethernet MAC transmit or NFC */ @@ -54,6 +53,12 @@ #define CH_MEM_STREAM1_DEST 14 /* TX */ #define CH_MEM_STREAM1_SRC 15 /* RX */ +#if defined(CONFIG_BF527_NAND_D_PORTF) +#define CH_NFC CH_PPI /* PPI receive/transmit or NFC */ +#elif defined(CONFIG_BF527_NAND_D_PORTH) +#define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */ +#endif + extern int channel2irq(unsigned int channel); extern struct dma_register *base_addr[]; diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h index 4e46d657e50..fcb72b41e00 100644 --- a/include/asm-blackfin/mach-bf548/defBF549.h +++ b/include/asm-blackfin/mach-bf548/defBF549.h @@ -1671,7 +1671,7 @@ /* Bit masks for MXVR_DMAx_CONFIG */ #define MDMAEN 0x1 /* DMA Channel Enable */ -#define DD 0x2 /* DMA Channel Direction */ +#define DMADD 0x2 /* DMA Channel Direction */ #define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */ #define LCHAN 0x3c0 /* DMA Channel Logical Channel */ #define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */ diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index 1d365c844ff..da979cb62f7 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -2252,6 +2252,13 @@ #define PLL_OFF 0x2 /* Disable PLL */ #define DF 0x1 /* Divide Frequency */ +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + /* Bit masks for PLL_STAT */ #define PLL_LOCKED 0x20 /* PLL Locked Status */ diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/include/asm-blackfin/mach-bf548/portmux.h index b382deb501a..6b485120015 100644 --- a/include/asm-blackfin/mach-bf548/portmux.h +++ b/include/asm-blackfin/mach-bf548/portmux.h @@ -267,4 +267,18 @@ #define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0)) #define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0)) + +#define P_NAND_D0 (P_DONTCARE) +#define P_NAND_D1 (P_DONTCARE) +#define P_NAND_D2 (P_DONTCARE) +#define P_NAND_D3 (P_DONTCARE) +#define P_NAND_D4 (P_DONTCARE) +#define P_NAND_D5 (P_DONTCARE) +#define P_NAND_D6 (P_DONTCARE) +#define P_NAND_D7 (P_DONTCARE) +#define P_NAND_WE (P_DONTCARE) +#define P_NAND_RE (P_DONTCARE) +#define P_NAND_CLE (P_DONTCARE) +#define P_NAND_ALE (P_DONTCARE) + #endif /* _MACH_PORTMUX_H_ */ diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index bf7dc4e0006..7945e8a3a84 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -55,6 +55,9 @@ /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ #define SWRST SICA_SWRST #define SYSCR SICA_SYSCR +#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A) +#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A) +#define RESET_SOFTWARE (SWRST_OCCURRED) /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ #define SICA_SWRST 0xFFC00100 /* Software Reset register */ diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h index 43a7aac414e..c4f1e328a5b 100644 --- a/include/asm-ia64/percpu.h +++ b/include/asm-ia64/percpu.h @@ -46,7 +46,7 @@ #ifdef CONFIG_SMP extern unsigned long __per_cpu_offset[NR_CPUS]; -#define per_cpu_offset(x) (__per_cpu_offset(x)) +#define per_cpu_offset(x) (__per_cpu_offset[x]) /* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */ DECLARE_PER_CPU(unsigned long, local_per_cpu_offset); diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h index 471cc2ee9ac..4fa733dd417 100644 --- a/include/asm-ia64/smp.h +++ b/include/asm-ia64/smp.h @@ -60,7 +60,6 @@ extern cpumask_t cpu_online_map; extern cpumask_t cpu_core_map[NR_CPUS]; DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); extern int smp_num_siblings; -extern int smp_num_cpucores; extern void __iomem *ipi_base_addr; extern unsigned char smp_int_redirect; diff --git a/include/asm-mips/i8253.h b/include/asm-mips/i8253.h index affb32ce4af..032ca73f181 100644 --- a/include/asm-mips/i8253.h +++ b/include/asm-mips/i8253.h @@ -5,25 +5,14 @@ #ifndef __ASM_I8253_H #define __ASM_I8253_H +#include <linux/spinlock.h> + /* i8253A PIT registers */ #define PIT_MODE 0x43 #define PIT_CH0 0x40 #define PIT_CH2 0x42 -/* i8259A PIC registers */ -#define PIC_MASTER_CMD 0x20 -#define PIC_MASTER_IMR 0x21 -#define PIC_MASTER_ISR PIC_MASTER_CMD -#define PIC_MASTER_POLL PIC_MASTER_ISR -#define PIC_MASTER_OCW3 PIC_MASTER_ISR -#define PIC_SLAVE_CMD 0xa0 -#define PIC_SLAVE_IMR 0xa1 - -/* i8259A PIC related value */ -#define PIC_CASCADE_IR 2 -#define MASTER_ICW4_DEFAULT 0x01 -#define SLAVE_ICW4_DEFAULT 0x01 -#define PIC_ICW4_AEOI 2 +extern spinlock_t i8253_lock; extern void setup_pit_timer(void); diff --git a/include/asm-mips/mach-au1x00/timex.h b/include/asm-mips/mach-au1x00/timex.h deleted file mode 100644 index e3ada66cb63..00000000000 --- a/include/asm-mips/mach-au1x00/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_AU1X00_TIMEX_H -#define __ASM_MACH_AU1X00_TIMEX_H - -#define CLOCK_TICK_RATE ((HZ * 100000UL) / 2) - -#endif /* __ASM_MACH_AU1X00_TIMEX_H */ diff --git a/include/asm-mips/mach-cobalt/irq.h b/include/asm-mips/mach-cobalt/irq.h index 179d0e850b5..57c8c9ac585 100644 --- a/include/asm-mips/mach-cobalt/irq.h +++ b/include/asm-mips/mach-cobalt/irq.h @@ -35,7 +35,7 @@ * 4 - ethernet * 5 - 16550 UART * 6 - cascade i8259 - * 7 - CP0 counter (unused) + * 7 - CP0 counter */ #define MIPS_CPU_IRQ_BASE 16 @@ -48,7 +48,6 @@ #define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5) #define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6) - #define GT641XX_IRQ_BASE 24 #include <asm/irq_gt641xx.h> diff --git a/include/asm-mips/mach-generic/timex.h b/include/asm-mips/mach-generic/timex.h deleted file mode 100644 index 48b4cfaa0d5..00000000000 --- a/include/asm-mips/mach-generic/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2005 by Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_TIMEX_H -#define __ASM_MACH_GENERIC_TIMEX_H - -#define CLOCK_TICK_RATE 500000 - -#endif /* __ASM_MACH_GENERIC_TIMEX_H */ diff --git a/include/asm-mips/mach-jazz/timex.h b/include/asm-mips/mach-jazz/timex.h deleted file mode 100644 index 93affa33dfa..00000000000 --- a/include/asm-mips/mach-jazz/timex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_JAZZ_TIMEX_H -#define __ASM_MACH_JAZZ_TIMEX_H - -/* - * Jazz is still using the R4030 100Hz counter - */ -#define CLOCK_TICK_RATE 100 - -#endif /* __ASM_MACH_JAZZ_TIMEX_H */ diff --git a/include/asm-mips/mach-qemu/timex.h b/include/asm-mips/mach-qemu/timex.h deleted file mode 100644 index cd543693fb0..00000000000 --- a/include/asm-mips/mach-qemu/timex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Daniel Jacobowitz - */ -#ifndef __ASM_MACH_QEMU_TIMEX_H -#define __ASM_MACH_QEMU_TIMEX_H - -/* - * We use a simulated i8254 PIC... - */ -#define CLOCK_TICK_RATE 1193182 - -#endif /* __ASM_MACH_QEMU_TIMEX_H */ diff --git a/include/asm-mips/mach-rm/timex.h b/include/asm-mips/mach-rm/timex.h deleted file mode 100644 index 11ff6cb0f21..00000000000 --- a/include/asm-mips/mach-rm/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2005 by Ralf Baechle - */ -#ifndef __ASM_MACH_RM200_TIMEX_H -#define __ASM_MACH_RM200_TIMEX_H - -#define CLOCK_TICK_RATE 1193182 - -#endif /* __ASM_MACH_RM200_TIMEX_H */ diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h index 0a6bc7dc158..ee1663e64da 100644 --- a/include/asm-mips/time.h +++ b/include/asm-mips/time.h @@ -10,15 +10,10 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * Please refer to Documentation/mips/time.README. */ #ifndef _ASM_TIME_H #define _ASM_TIME_H -#include <linux/interrupt.h> -#include <linux/linkage.h> -#include <linux/ptrace.h> #include <linux/rtc.h> #include <linux/spinlock.h> #include <linux/clockchips.h> @@ -38,25 +33,12 @@ extern int rtc_mips_set_mmss(unsigned long); /* * Timer interrupt functions. * mips_timer_state is needed for high precision timer calibration. - * mips_timer_ack may be NULL if the interrupt is self-recoverable. */ extern int (*mips_timer_state)(void); /* - * High precision timer clocksource. - * If .read is NULL, an R4k-compatible timer setup is attempted. - */ -extern struct clocksource clocksource_mips; - -/* - * profiling and process accouting is done separately in local_timer_interrupt - */ -extern void local_timer_interrupt(int irq, void *dev_id); - -/* * board specific routines required by time_init(). */ -struct irqaction; extern void plat_time_init(void); /* diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h index 87c68ae76ff..5816ad1569d 100644 --- a/include/asm-mips/timex.h +++ b/include/asm-mips/timex.h @@ -13,27 +13,12 @@ #include <asm/mipsregs.h> /* - * This is the frequency of the timer used for Linux's timer interrupt. - * The value should be defined as accurate as possible or under certain - * circumstances Linux timekeeping might become inaccurate or fail. - * - * For many system the exact clockrate of the timer isn't known but due to - * the way this value is used we can get away with a wrong value as long - * as this value is: - * - * - a multiple of HZ - * - a divisor of the actual rate - * - * 500000 is a good such cheat value. - * - * The obscure number 1193182 is the same as used by the original i8254 - * time in legacy PC hardware; the chip unfortunately also found in a - * bunch of MIPS systems. The last remaining user of the i8254 for the - * timer interrupt is the RM200; it's a very standard system so there is - * no reason to make this a separate architecture. + * This is the clock rate of the i8253 PIT. A MIPS system may not have + * a PIT by the symbol is used all over the kernel including some APIs. + * So keeping it defined to the number for the PIT is the only sane thing + * for now. */ - -#include <timex.h> +#define CLOCK_TICK_RATE 1193182 /* * Standard way to access the cycle counter. diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h index 876312fe82c..df1097d6ffb 100644 --- a/include/asm-sparc64/futex.h +++ b/include/asm-sparc64/futex.h @@ -17,7 +17,8 @@ "3:\n" \ " .section .fixup,#alloc,#execinstr\n" \ " .align 4\n" \ - "4: ba 3b\n" \ + "4: sethi %%hi(3b), %0\n" \ + " jmpl %0 + %%lo(3b), %%g0\n" \ " mov %5, %0\n" \ " .previous\n" \ " .section __ex_table,\"a\"\n" \ @@ -91,7 +92,8 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) "2:\n" " .section .fixup,#alloc,#execinstr\n" " .align 4\n" - "3: ba 2b\n" + "3: sethi %%hi(2b), %0\n" + " jmpl %0 + %%lo(2b), %%g0\n" " mov %4, %0\n" " .previous\n" " .section __ex_table,\"a\"\n" diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h index 159e62b51d7..99a669c190c 100644 --- a/include/asm-sparc64/system.h +++ b/include/asm-sparc64/system.h @@ -178,7 +178,9 @@ do { if (test_thread_flag(TIF_PERFCTR)) { \ "ldx [%%g6 + %9], %%g4\n\t" \ "brz,pt %%o7, 1f\n\t" \ " mov %%g7, %0\n\t" \ - "b,a ret_from_syscall\n\t" \ + "sethi %%hi(ret_from_syscall), %%g1\n\t" \ + "jmpl %%g1 + %%lo(ret_from_syscall), %%g0\n\t" \ + " nop\n\t" \ "1:\n\t" \ : "=&r" (last), "=r" (current), "=r" (current_thread_info_reg), \ "=r" (__local_per_cpu_offset) \ diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h index afe236ba555..93720e7b028 100644 --- a/include/asm-sparc64/uaccess.h +++ b/include/asm-sparc64/uaccess.h @@ -123,7 +123,8 @@ __asm__ __volatile__( \ ".section .fixup,#alloc,#execinstr\n\t" \ ".align 4\n" \ "3:\n\t" \ - "b 2b\n\t" \ + "sethi %%hi(2b), %0\n\t" \ + "jmpl %0 + %%lo(2b), %%g0\n\t" \ " mov %3, %0\n\n\t" \ ".previous\n\t" \ ".section __ex_table,\"a\"\n\t" \ @@ -165,8 +166,9 @@ __asm__ __volatile__( \ ".section .fixup,#alloc,#execinstr\n\t" \ ".align 4\n" \ "3:\n\t" \ + "sethi %%hi(2b), %0\n\t" \ "clr %1\n\t" \ - "b 2b\n\t" \ + "jmpl %0 + %%lo(2b), %%g0\n\t" \ " mov %3, %0\n\n\t" \ ".previous\n\t" \ ".section __ex_table,\"a\"\n\t" \ diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h new file mode 100644 index 00000000000..f704c50519b --- /dev/null +++ b/include/asm-x86/gart.h @@ -0,0 +1,29 @@ +#ifndef _ASM_X8664_IOMMU_H +#define _ASM_X8664_IOMMU_H 1 + +extern void pci_iommu_shutdown(void); +extern void no_iommu_init(void); +extern int force_iommu, no_iommu; +extern int iommu_detected; +#ifdef CONFIG_GART_IOMMU +extern void gart_iommu_init(void); +extern void gart_iommu_shutdown(void); +extern void __init gart_parse_options(char *); +extern void gart_iommu_hole_init(void); +extern int fallback_aper_order; +extern int fallback_aper_force; +extern int gart_iommu_aperture; +extern int gart_iommu_aperture_allowed; +extern int gart_iommu_aperture_disabled; +extern int fix_aperture; +#else +#define gart_iommu_aperture 0 +#define gart_iommu_aperture_allowed 0 + +static inline void gart_iommu_shutdown(void) +{ +} + +#endif + +#endif diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h index 5af471f228e..07862fdd23c 100644 --- a/include/asm-x86/iommu.h +++ b/include/asm-x86/iommu.h @@ -1,5 +1,5 @@ -#ifndef _ASM_X8664_IOMMU_H -#define _ASM_X8664_IOMMU_H 1 +#ifndef _ASM_X8664_GART_H +#define _ASM_X8664_GART_H 1 extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h index 9baa46d9f59..ef54226a932 100644 --- a/include/asm-x86/pci_64.h +++ b/include/asm-x86/pci_64.h @@ -37,7 +37,7 @@ extern int iommu_setup(char *opt); */ #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) -#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU) +#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU) #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 6a65231bc78..37bfa19d806 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -149,6 +149,7 @@ header-y += ticable.h header-y += times.h header-y += tiocl.h header-y += tipc.h +header-y += tipc_config.h header-y += toshiba.h header-y += ultrasound.h header-y += un.h @@ -325,6 +326,7 @@ unifdef-y += sonypi.h unifdef-y += soundcard.h unifdef-y += stat.h unifdef-y += stddef.h +unifdef-y += string.h unifdef-y += synclink.h unifdef-y += sysctl.h unifdef-y += tcp.h diff --git a/include/linux/ata.h b/include/linux/ata.h index 128dc7ad490..61535e72834 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -43,6 +43,7 @@ enum { ATA_MAX_SECTORS_128 = 128, ATA_MAX_SECTORS = 256, ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */ + ATA_MAX_SECTORS_TAPE = 65535, ATA_ID_WORDS = 256, ATA_ID_SERNO = 10, @@ -544,6 +545,11 @@ static inline int atapi_cdb_len(const u16 *dev_id) } } +static inline int atapi_command_packet_set(const u16 *dev_id) +{ + return (dev_id[0] >> 8) & 0x1f; +} + static inline int is_atapi_taskfile(const struct ata_taskfile *tf) { return (tf->protocol == ATA_PROT_ATAPI) || diff --git a/include/linux/input.h b/include/linux/input.h index 62268929856..b45f240a8c4 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -527,6 +527,9 @@ struct input_absinfo { #define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ #define KEY_LOGOFF 0x1b1 /* AL Logoff */ +#define KEY_DOLLAR 0x1b2 +#define KEY_EURO 0x1b3 + #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 #define KEY_INS_LINE 0x1c2 diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 56ae438ae51..6e8cec50338 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -173,7 +173,7 @@ static inline int ipmi_demangle_device_id(const unsigned char *data, id->firmware_revision_2 = data[3]; id->ipmi_version = data[4]; id->additional_device_support = data[5]; - if (data_len >= 6) { + if (data_len >= 11) { id->manufacturer_id = (data[6] | (data[7] << 8) | (data[8] << 16)); id->product_id = data[9] | (data[10] << 8); diff --git a/include/linux/libata.h b/include/linux/libata.h index 147ccc40c8a..1e277852ba4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -221,6 +221,7 @@ enum { ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */ + ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */ ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */ ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 8df230a279a..30e11aa3c1c 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -8,9 +8,9 @@ #define MV643XX_ETH_NAME "mv643xx_eth" #define MV643XX_ETH_SHARED_REGS 0x2000 #define MV643XX_ETH_SHARED_REGS_SIZE 0x2000 -#define MV643XX_ETH_BAR_4 0x220 -#define MV643XX_ETH_SIZE_REG_4 0x224 -#define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x0290 +#define MV643XX_ETH_BAR_4 0x2220 +#define MV643XX_ETH_SIZE_REG_4 0x2224 +#define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 struct mv643xx_eth_platform_data { int port_number; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9b0c8f12373..1e6af4f174b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -739,6 +739,16 @@ static inline void *netdev_priv(const struct net_device *dev) */ #define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev)) +/** + * netif_napi_add - initialize a napi context + * @dev: network device + * @napi: napi context + * @poll: polling function + * @weight: default weight + * + * netif_napi_add() must be used to initialize a napi context prior to calling + * *any* of the other napi related functions. + */ static inline void netif_napi_add(struct net_device *dev, struct napi_struct *napi, int (*poll)(struct napi_struct *, int), diff --git a/include/linux/sched.h b/include/linux/sched.h index b0b1fe6e0b1..155d7438f7a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1009,7 +1009,7 @@ struct task_struct { unsigned int rt_priority; cputime_t utime, stime, utimescaled, stimescaled; cputime_t gtime; - cputime_t prev_utime; + cputime_t prev_utime, prev_stime; unsigned long nvcsw, nivcsw; /* context switch counts */ struct timespec start_time; /* monotonic time */ struct timespec real_start_time; /* boot based time */ diff --git a/include/linux/string.h b/include/linux/string.h index 836062b7582..c5d3fcad7b5 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -3,16 +3,14 @@ /* We don't want strings.h stuff being user by user stuff by accident */ -#ifdef __KERNEL__ +#ifndef __KERNEL__ +#include <string.h> +#else #include <linux/compiler.h> /* for inline */ #include <linux/types.h> /* for size_t */ #include <linux/stddef.h> /* for NULL */ -#ifdef __cplusplus -extern "C" { -#endif - extern char *strndup_user(const char __user *, long); /* @@ -111,9 +109,5 @@ extern void *kmemdup(const void *src, size_t len, gfp_t gfp); extern char **argv_split(gfp_t gfp, const char *str, int *argcp); extern void argv_free(char **argv); -#ifdef __cplusplus -} -#endif - #endif #endif /* _LINUX_STRING_H_ */ diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 5279466606d..1fd449a6530 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -51,13 +51,12 @@ static inline struct net *copy_net_ns(unsigned long flags, struct net *net_ns) } #endif +#ifdef CONFIG_NET_NS extern void __put_net(struct net *net); static inline struct net *get_net(struct net *net) { -#ifdef CONFIG_NET atomic_inc(&net->count); -#endif return net; } @@ -75,26 +74,44 @@ static inline struct net *maybe_get_net(struct net *net) static inline void put_net(struct net *net) { -#ifdef CONFIG_NET if (atomic_dec_and_test(&net->count)) __put_net(net); -#endif } static inline struct net *hold_net(struct net *net) { -#ifdef CONFIG_NET atomic_inc(&net->use_count); -#endif return net; } static inline void release_net(struct net *net) { -#ifdef CONFIG_NET atomic_dec(&net->use_count); -#endif } +#else +static inline struct net *get_net(struct net *net) +{ + return net; +} + +static inline void put_net(struct net *net) +{ +} + +static inline struct net *hold_net(struct net *net) +{ + return net; +} + +static inline void release_net(struct net *net) +{ +} + +static inline struct net *maybe_get_net(struct net *net) +{ + return net; +} +#endif #define for_each_net(VAR) \ list_for_each_entry(VAR, &net_namespace_list, list) diff --git a/include/net/sock.h b/include/net/sock.h index 43fc3fa50d6..20de3fa7ae4 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -779,7 +779,7 @@ extern void FASTCALL(release_sock(struct sock *sk)); extern struct sock *sk_alloc(struct net *net, int family, gfp_t priority, - struct proto *prot, int zero_it); + struct proto *prot); extern void sk_free(struct sock *sk); extern struct sock *sk_clone(const struct sock *sk, const gfp_t priority); @@ -993,20 +993,6 @@ static inline void sock_graft(struct sock *sk, struct socket *parent) write_unlock_bh(&sk->sk_callback_lock); } -static inline void sock_copy(struct sock *nsk, const struct sock *osk) -{ -#ifdef CONFIG_SECURITY_NETWORK - void *sptr = nsk->sk_security; -#endif - - memcpy(nsk, osk, osk->sk_prot->obj_size); - get_net(nsk->sk_net); -#ifdef CONFIG_SECURITY_NETWORK - nsk->sk_security = sptr; - security_sk_clone(osk, nsk); -#endif -} - extern int sock_i_uid(struct sock *sk); extern unsigned long sock_i_ino(struct sock *sk); diff --git a/kernel/fork.c b/kernel/fork.c index a65bfc47177..28a74015198 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1057,6 +1057,7 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->utimescaled = cputime_zero; p->stimescaled = cputime_zero; p->prev_utime = cputime_zero; + p->prev_stime = cputime_zero; #ifdef CONFIG_TASK_XACCT p->rchar = 0; /* I/O counter: bytes read */ diff --git a/kernel/signal.c b/kernel/signal.c index 4537bdda1eb..909a0cc6bc7 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -124,7 +124,7 @@ void recalc_sigpending_and_wake(struct task_struct *t) void recalc_sigpending(void) { - if (!recalc_sigpending_tsk(current)) + if (!recalc_sigpending_tsk(current) && !freezing(current)) clear_thread_flag(TIF_SIGPENDING); } diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index 52c7a151e29..56cb009a4b3 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -40,10 +40,14 @@ cond_syscall(sys_recvfrom); cond_syscall(sys_recv); cond_syscall(sys_socket); cond_syscall(sys_setsockopt); +cond_syscall(compat_sys_setsockopt); cond_syscall(sys_getsockopt); +cond_syscall(compat_sys_getsockopt); cond_syscall(sys_shutdown); cond_syscall(sys_sendmsg); +cond_syscall(compat_sys_sendmsg); cond_syscall(sys_recvmsg); +cond_syscall(compat_sys_recvmsg); cond_syscall(sys_socketcall); cond_syscall(sys_futex); cond_syscall(compat_sys_futex); diff --git a/lib/kobject.c b/lib/kobject.c index 03d40360ff1..a7e3bf4d3c7 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -308,6 +308,19 @@ int kobject_rename(struct kobject * kobj, const char *new_name) if (!kobj->parent) return -EINVAL; + /* see if this name is already in use */ + if (kobj->kset) { + struct kobject *temp_kobj; + temp_kobj = kset_find_obj(kobj->kset, new_name); + if (temp_kobj) { + printk(KERN_WARNING "kobject '%s' can not be renamed " + "to '%s' as '%s' is already in existance.\n", + kobject_name(kobj), new_name, new_name); + kobject_put(temp_kobj); + return -EINVAL; + } + } + devpath = kobject_get_path(kobj, GFP_KERNEL); if (!devpath) { error = -ENOMEM; diff --git a/mm/filemap.c b/mm/filemap.c index 7c864363002..188cf5fd3e8 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1300,7 +1300,7 @@ int filemap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; if (vmf->pgoff >= size) - goto outside_data_content; + return VM_FAULT_SIGBUS; /* If we don't want any read-ahead, don't bother */ if (VM_RandomReadHint(vma)) @@ -1377,7 +1377,7 @@ retry_find: if (unlikely(vmf->pgoff >= size)) { unlock_page(page); page_cache_release(page); - goto outside_data_content; + return VM_FAULT_SIGBUS; } /* @@ -1388,15 +1388,6 @@ retry_find: vmf->page = page; return ret | VM_FAULT_LOCKED; -outside_data_content: - /* - * An external ptracer can access pages that normally aren't - * accessible.. - */ - if (vma->vm_mm == current->mm) - return VM_FAULT_SIGBUS; - - /* Fall through to the non-read-ahead case */ no_cached_page: /* * We're only likely to ever get here if MADV_RANDOM is in @@ -2511,21 +2502,17 @@ generic_file_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, } retval = mapping->a_ops->direct_IO(rw, iocb, iov, offset, nr_segs); - if (retval) - goto out; /* * Finally, try again to invalidate clean pages which might have been - * faulted in by get_user_pages() if the source of the write was an - * mmap()ed region of the file we're writing. That's a pretty crazy - * thing to do, so we don't support it 100%. If this invalidation - * fails and we have -EIOCBQUEUED we ignore the failure. + * cached by non-direct readahead, or faulted in by get_user_pages() + * if the source of the write was an mmap'ed region of the file + * we're writing. Either one is a pretty crazy thing to do, + * so we don't support it 100%. If this invalidation + * fails, tough, the write still worked... */ if (rw == WRITE && mapping->nrpages) { - int err = invalidate_inode_pages2_range(mapping, - offset >> PAGE_CACHE_SHIFT, end); - if (err && retval >= 0) - retval = err; + invalidate_inode_pages2_range(mapping, offset >> PAGE_CACHE_SHIFT, end); } out: return retval; diff --git a/mm/shmem.c b/mm/shmem.c index 404e53bb212..253d205914b 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -915,6 +915,21 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc) struct inode *inode; BUG_ON(!PageLocked(page)); + /* + * shmem_backing_dev_info's capabilities prevent regular writeback or + * sync from ever calling shmem_writepage; but a stacking filesystem + * may use the ->writepage of its underlying filesystem, in which case + * we want to do nothing when that underlying filesystem is tmpfs + * (writing out to swap is useful as a response to memory pressure, but + * of no use to stabilize the data) - just redirty the page, unlock it + * and claim success in this case. AOP_WRITEPAGE_ACTIVATE, and the + * page_mapped check below, must be avoided unless we're in reclaim. + */ + if (!wbc->for_reclaim) { + set_page_dirty(page); + unlock_page(page); + return 0; + } BUG_ON(page_mapped(page)); mapping = page->mapping; diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index d3b718b0c20..22620f6a976 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/vmalloc.h> +#include <linux/sched.h> #include <asm/dma.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 7c0b5151d52..e0d37d6dc1f 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1044,7 +1044,7 @@ static int atalk_create(struct net *net, struct socket *sock, int protocol) if (sock->type != SOCK_RAW && sock->type != SOCK_DGRAM) goto out; rc = -ENOMEM; - sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto, 1); + sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto); if (!sk) goto out; rc = 0; diff --git a/net/atm/common.c b/net/atm/common.c index e166d9e0ffd..eba09a04f6b 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -133,7 +133,7 @@ int vcc_create(struct net *net, struct socket *sock, int protocol, int family) sock->sk = NULL; if (sock->type == SOCK_STREAM) return -EINVAL; - sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto, 1); + sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto); if (!sk) return -ENOMEM; sock_init_data(sock, sk); diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index 993e5c75e90..8378afd54b3 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -836,7 +836,8 @@ static int ax25_create(struct net *net, struct socket *sock, int protocol) return -ESOCKTNOSUPPORT; } - if ((sk = sk_alloc(net, PF_AX25, GFP_ATOMIC, &ax25_proto, 1)) == NULL) + sk = sk_alloc(net, PF_AX25, GFP_ATOMIC, &ax25_proto); + if (sk == NULL) return -ENOMEM; ax25 = sk->sk_protinfo = ax25_create_cb(); @@ -861,7 +862,8 @@ struct sock *ax25_make_new(struct sock *osk, struct ax25_dev *ax25_dev) struct sock *sk; ax25_cb *ax25, *oax25; - if ((sk = sk_alloc(osk->sk_net, PF_AX25, GFP_ATOMIC, osk->sk_prot, 1)) == NULL) + sk = sk_alloc(osk->sk_net, PF_AX25, GFP_ATOMIC, osk->sk_prot); + if (sk == NULL) return NULL; if ((ax25 = ax25_create_cb()) == NULL) { diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c index f718965f296..9ebd3c64474 100644 --- a/net/bluetooth/bnep/sock.c +++ b/net/bluetooth/bnep/sock.c @@ -213,7 +213,7 @@ static int bnep_sock_create(struct net *net, struct socket *sock, int protocol) if (sock->type != SOCK_RAW) return -ESOCKTNOSUPPORT; - sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &bnep_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &bnep_proto); if (!sk) return -ENOMEM; diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c index cf700c20d11..783edab12ce 100644 --- a/net/bluetooth/cmtp/sock.c +++ b/net/bluetooth/cmtp/sock.c @@ -204,7 +204,7 @@ static int cmtp_sock_create(struct net *net, struct socket *sock, int protocol) if (sock->type != SOCK_RAW) return -ESOCKTNOSUPPORT; - sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &cmtp_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &cmtp_proto); if (!sk) return -ENOMEM; diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 8825102c517..14991323c27 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -645,7 +645,7 @@ static int hci_sock_create(struct net *net, struct socket *sock, int protocol) sock->ops = &hci_sock_ops; - sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hci_sk_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hci_sk_proto); if (!sk) return -ENOMEM; diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c index 1de2b6fbcac..3292b956a7c 100644 --- a/net/bluetooth/hidp/sock.c +++ b/net/bluetooth/hidp/sock.c @@ -255,7 +255,7 @@ static int hidp_sock_create(struct net *net, struct socket *sock, int protocol) if (sock->type != SOCK_RAW) return -ESOCKTNOSUPPORT; - sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hidp_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hidp_proto); if (!sk) return -ENOMEM; diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 6fbbae78b30..477e052b17b 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -607,7 +607,7 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int p { struct sock *sk; - sk = sk_alloc(net, PF_BLUETOOTH, prio, &l2cap_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, prio, &l2cap_proto); if (!sk) return NULL; diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 266b6972667..c46d51035e7 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -287,7 +287,7 @@ static struct sock *rfcomm_sock_alloc(struct net *net, struct socket *sock, int struct rfcomm_dlc *d; struct sock *sk; - sk = sk_alloc(net, PF_BLUETOOTH, prio, &rfcomm_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, prio, &rfcomm_proto); if (!sk) return NULL; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 82d0dfdfa7e..93ad1aae3f3 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -421,7 +421,7 @@ static struct sock *sco_sock_alloc(struct net *net, struct socket *sock, int pro { struct sock *sk; - sk = sk_alloc(net, PF_BLUETOOTH, prio, &sco_proto, 1); + sk = sk_alloc(net, PF_BLUETOOTH, prio, &sco_proto); if (!sk) return NULL; diff --git a/net/core/dev.c b/net/core/dev.c index 853c8b575f1..be6cedab5aa 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1751,9 +1751,6 @@ DEFINE_PER_CPU(struct netif_rx_stats, netdev_rx_stat) = { 0, }; * * return values: * NET_RX_SUCCESS (no congestion) - * NET_RX_CN_LOW (low congestion) - * NET_RX_CN_MOD (moderate congestion) - * NET_RX_CN_HIGH (high congestion) * NET_RX_DROP (packet was dropped) * */ @@ -2001,6 +1998,21 @@ out: } #endif +/** + * netif_receive_skb - process receive buffer from network + * @skb: buffer to process + * + * netif_receive_skb() is the main receive data processing function. + * It always succeeds. The buffer may be dropped during processing + * for congestion control or by the protocol layers. + * + * This function may only be called from softirq context and interrupts + * should be enabled. + * + * Return values (usually ignored): + * NET_RX_SUCCESS: no congestion + * NET_RX_DROP: packet was dropped + */ int netif_receive_skb(struct sk_buff *skb) { struct packet_type *ptype, *pt_prev; @@ -2172,7 +2184,15 @@ static void net_rx_action(struct softirq_action *h) weight = n->weight; - work = n->poll(n, weight); + /* This NAPI_STATE_SCHED test is for avoiding a race + * with netpoll's poll_napi(). Only the entity which + * obtains the lock and sees NAPI_STATE_SCHED set will + * actually make the ->poll() call. Therefore we avoid + * accidently calling ->poll() when NAPI is not scheduled. + */ + work = 0; + if (test_bit(NAPI_STATE_SCHED, &n->state)) + work = n->poll(n, weight); WARN_ON_ONCE(work > weight); @@ -3488,6 +3508,60 @@ static void net_set_todo(struct net_device *dev) spin_unlock(&net_todo_list_lock); } +static void rollback_registered(struct net_device *dev) +{ + BUG_ON(dev_boot_phase); + ASSERT_RTNL(); + + /* Some devices call without registering for initialization unwind. */ + if (dev->reg_state == NETREG_UNINITIALIZED) { + printk(KERN_DEBUG "unregister_netdevice: device %s/%p never " + "was registered\n", dev->name, dev); + + WARN_ON(1); + return; + } + + BUG_ON(dev->reg_state != NETREG_REGISTERED); + + /* If device is running, close it first. */ + dev_close(dev); + + /* And unlink it from device chain. */ + unlist_netdevice(dev); + + dev->reg_state = NETREG_UNREGISTERING; + + synchronize_net(); + + /* Shutdown queueing discipline. */ + dev_shutdown(dev); + + + /* Notify protocols, that we are about to destroy + this device. They should clean all the things. + */ + call_netdevice_notifiers(NETDEV_UNREGISTER, dev); + + /* + * Flush the unicast and multicast chains + */ + dev_addr_discard(dev); + + if (dev->uninit) + dev->uninit(dev); + + /* Notifier chain MUST detach us from master device. */ + BUG_TRAP(!dev->master); + + /* Remove entries from kobject tree */ + netdev_unregister_kobject(dev); + + synchronize_net(); + + dev_put(dev); +} + /** * register_netdevice - register a network device * @dev: device to register @@ -3625,8 +3699,10 @@ int register_netdevice(struct net_device *dev) /* Notify protocols, that a new device appeared. */ ret = call_netdevice_notifiers(NETDEV_REGISTER, dev); ret = notifier_to_errno(ret); - if (ret) - unregister_netdevice(dev); + if (ret) { + rollback_registered(dev); + dev->reg_state = NETREG_UNREGISTERED; + } out: return ret; @@ -3903,59 +3979,9 @@ void synchronize_net(void) void unregister_netdevice(struct net_device *dev) { - BUG_ON(dev_boot_phase); - ASSERT_RTNL(); - - /* Some devices call without registering for initialization unwind. */ - if (dev->reg_state == NETREG_UNINITIALIZED) { - printk(KERN_DEBUG "unregister_netdevice: device %s/%p never " - "was registered\n", dev->name, dev); - - WARN_ON(1); - return; - } - - BUG_ON(dev->reg_state != NETREG_REGISTERED); - - /* If device is running, close it first. */ - dev_close(dev); - - /* And unlink it from device chain. */ - unlist_netdevice(dev); - - dev->reg_state = NETREG_UNREGISTERING; - - synchronize_net(); - - /* Shutdown queueing discipline. */ - dev_shutdown(dev); - - - /* Notify protocols, that we are about to destroy - this device. They should clean all the things. - */ - call_netdevice_notifiers(NETDEV_UNREGISTER, dev); - - /* - * Flush the unicast and multicast chains - */ - dev_addr_discard(dev); - - if (dev->uninit) - dev->uninit(dev); - - /* Notifier chain MUST detach us from master device. */ - BUG_TRAP(!dev->master); - - /* Remove entries from kobject tree */ - netdev_unregister_kobject(dev); - + rollback_registered(dev); /* Finish processing unregister after unlock */ net_set_todo(dev); - - synchronize_net(); - - dev_put(dev); } /** diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 6f71db8c442..e9f0964ce70 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -17,74 +17,13 @@ static DEFINE_MUTEX(net_mutex); LIST_HEAD(net_namespace_list); -static struct kmem_cache *net_cachep; - struct net init_net; EXPORT_SYMBOL_GPL(init_net); -static struct net *net_alloc(void) -{ - return kmem_cache_zalloc(net_cachep, GFP_KERNEL); -} - -static void net_free(struct net *net) -{ - if (!net) - return; - - if (unlikely(atomic_read(&net->use_count) != 0)) { - printk(KERN_EMERG "network namespace not free! Usage: %d\n", - atomic_read(&net->use_count)); - return; - } - - kmem_cache_free(net_cachep, net); -} - -static void cleanup_net(struct work_struct *work) -{ - struct pernet_operations *ops; - struct net *net; - - net = container_of(work, struct net, work); - - mutex_lock(&net_mutex); - - /* Don't let anyone else find us. */ - rtnl_lock(); - list_del(&net->list); - rtnl_unlock(); - - /* Run all of the network namespace exit methods */ - list_for_each_entry_reverse(ops, &pernet_list, list) { - if (ops->exit) - ops->exit(net); - } - - mutex_unlock(&net_mutex); - - /* Ensure there are no outstanding rcu callbacks using this - * network namespace. - */ - rcu_barrier(); - - /* Finally it is safe to free my network namespace structure */ - net_free(net); -} - - -void __put_net(struct net *net) -{ - /* Cleanup the network namespace in process context */ - INIT_WORK(&net->work, cleanup_net); - schedule_work(&net->work); -} -EXPORT_SYMBOL_GPL(__put_net); - /* * setup_net runs the initializers for the network namespace object. */ -static int setup_net(struct net *net) +static __net_init int setup_net(struct net *net) { /* Must be called with net_mutex held */ struct pernet_operations *ops; @@ -112,9 +51,19 @@ out_undo: if (ops->exit) ops->exit(net); } + + rcu_barrier(); goto out; } +#ifdef CONFIG_NET_NS +static struct kmem_cache *net_cachep; + +static struct net *net_alloc(void) +{ + return kmem_cache_zalloc(net_cachep, GFP_KERNEL); +} + struct net *copy_net_ns(unsigned long flags, struct net *old_net) { struct net *new_net = NULL; @@ -125,10 +74,6 @@ struct net *copy_net_ns(unsigned long flags, struct net *old_net) if (!(flags & CLONE_NEWNET)) return old_net; -#ifndef CONFIG_NET_NS - return ERR_PTR(-EINVAL); -#endif - err = -ENOMEM; new_net = net_alloc(); if (!new_net) @@ -155,14 +100,78 @@ out: return new_net; } +static void net_free(struct net *net) +{ + if (!net) + return; + + if (unlikely(atomic_read(&net->use_count) != 0)) { + printk(KERN_EMERG "network namespace not free! Usage: %d\n", + atomic_read(&net->use_count)); + return; + } + + kmem_cache_free(net_cachep, net); +} + +static void cleanup_net(struct work_struct *work) +{ + struct pernet_operations *ops; + struct net *net; + + net = container_of(work, struct net, work); + + mutex_lock(&net_mutex); + + /* Don't let anyone else find us. */ + rtnl_lock(); + list_del(&net->list); + rtnl_unlock(); + + /* Run all of the network namespace exit methods */ + list_for_each_entry_reverse(ops, &pernet_list, list) { + if (ops->exit) + ops->exit(net); + } + + mutex_unlock(&net_mutex); + + /* Ensure there are no outstanding rcu callbacks using this + * network namespace. + */ + rcu_barrier(); + + /* Finally it is safe to free my network namespace structure */ + net_free(net); +} + +void __put_net(struct net *net) +{ + /* Cleanup the network namespace in process context */ + INIT_WORK(&net->work, cleanup_net); + schedule_work(&net->work); +} +EXPORT_SYMBOL_GPL(__put_net); + +#else +struct net *copy_net_ns(unsigned long flags, struct net *old_net) +{ + if (flags & CLONE_NEWNET) + return ERR_PTR(-EINVAL); + return old_net; +} +#endif + static int __init net_ns_init(void) { int err; printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net)); +#ifdef CONFIG_NET_NS net_cachep = kmem_cache_create("net_namespace", sizeof(struct net), SMP_CACHE_BYTES, SLAB_PANIC, NULL); +#endif mutex_lock(&net_mutex); err = setup_net(&init_net); @@ -185,29 +194,28 @@ static int register_pernet_operations(struct list_head *list, struct net *net, *undo_net; int error; - error = 0; list_add_tail(&ops->list, list); - for_each_net(net) { - if (ops->init) { + if (ops->init) { + for_each_net(net) { error = ops->init(net); if (error) goto out_undo; } } -out: - return error; + return 0; out_undo: /* If I have an error cleanup all namespaces I initialized */ list_del(&ops->list); - for_each_net(undo_net) { - if (undo_net == net) - goto undone; - if (ops->exit) + if (ops->exit) { + for_each_net(undo_net) { + if (undo_net == net) + goto undone; ops->exit(undo_net); + } } undone: - goto out; + return error; } static void unregister_pernet_operations(struct pernet_operations *ops) @@ -215,8 +223,8 @@ static void unregister_pernet_operations(struct pernet_operations *ops) struct net *net; list_del(&ops->list); - for_each_net(net) - if (ops->exit) + if (ops->exit) + for_each_net(net) ops->exit(net); } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index bf8d18f1b01..c499b5c69be 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -116,6 +116,29 @@ static __sum16 checksum_udp(struct sk_buff *skb, struct udphdr *uh, * network adapter, forcing superfluous retries and possibly timeouts. * Thus, we set our budget to greater than 1. */ +static int poll_one_napi(struct netpoll_info *npinfo, + struct napi_struct *napi, int budget) +{ + int work; + + /* net_rx_action's ->poll() invocations and our's are + * synchronized by this test which is only made while + * holding the napi->poll_lock. + */ + if (!test_bit(NAPI_STATE_SCHED, &napi->state)) + return budget; + + npinfo->rx_flags |= NETPOLL_RX_DROP; + atomic_inc(&trapped); + + work = napi->poll(napi, budget); + + atomic_dec(&trapped); + npinfo->rx_flags &= ~NETPOLL_RX_DROP; + + return budget - work; +} + static void poll_napi(struct netpoll *np) { struct netpoll_info *npinfo = np->dev->npinfo; @@ -123,17 +146,13 @@ static void poll_napi(struct netpoll *np) int budget = 16; list_for_each_entry(napi, &np->dev->napi_list, dev_list) { - if (test_bit(NAPI_STATE_SCHED, &napi->state) && - napi->poll_owner != smp_processor_id() && + if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { - npinfo->rx_flags |= NETPOLL_RX_DROP; - atomic_inc(&trapped); - - napi->poll(napi, budget); - - atomic_dec(&trapped); - npinfo->rx_flags &= ~NETPOLL_RX_DROP; + budget = poll_one_napi(npinfo, napi, budget); spin_unlock(&napi->poll_lock); + + if (!budget) + break; } } } diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 573e1724019..64b50ff7a41 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2028,8 +2028,8 @@ void __init skb_init(void) * Fill the specified scatter-gather list with mappings/pointers into a * region of the buffer space attached to a socket buffer. */ -int -skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +static int +__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) { int start = skb_headlen(skb); int i, copy = start - offset; @@ -2078,7 +2078,8 @@ skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) if ((copy = end - offset) > 0) { if (copy > len) copy = len; - elt += skb_to_sgvec(list, sg+elt, offset - start, copy); + elt += __skb_to_sgvec(list, sg+elt, offset - start, + copy); if ((len -= copy) == 0) return elt; offset += copy; @@ -2090,6 +2091,15 @@ skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) return elt; } +int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +{ + int nsg = __skb_to_sgvec(skb, sg, offset, len); + + __sg_mark_end(&sg[nsg - 1]); + + return nsg; +} + /** * skb_cow_data - Check that a socket buffer's data buffers are writable * @skb: The socket buffer to check. diff --git a/net/core/sock.c b/net/core/sock.c index bba9949681f..12ad2067a98 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -857,46 +857,43 @@ static inline void sock_lock_init(struct sock *sk) af_family_keys + sk->sk_family); } -/** - * sk_alloc - All socket objects are allocated here - * @net: the applicable net namespace - * @family: protocol family - * @priority: for allocation (%GFP_KERNEL, %GFP_ATOMIC, etc) - * @prot: struct proto associated with this new sock instance - * @zero_it: if we should zero the newly allocated sock - */ -struct sock *sk_alloc(struct net *net, int family, gfp_t priority, - struct proto *prot, int zero_it) +static void sock_copy(struct sock *nsk, const struct sock *osk) +{ +#ifdef CONFIG_SECURITY_NETWORK + void *sptr = nsk->sk_security; +#endif + + memcpy(nsk, osk, osk->sk_prot->obj_size); +#ifdef CONFIG_SECURITY_NETWORK + nsk->sk_security = sptr; + security_sk_clone(osk, nsk); +#endif +} + +static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority, + int family) { - struct sock *sk = NULL; - struct kmem_cache *slab = prot->slab; + struct sock *sk; + struct kmem_cache *slab; + slab = prot->slab; if (slab != NULL) sk = kmem_cache_alloc(slab, priority); else sk = kmalloc(prot->obj_size, priority); - if (sk) { - if (zero_it) { - memset(sk, 0, prot->obj_size); - sk->sk_family = family; - /* - * See comment in struct sock definition to understand - * why we need sk_prot_creator -acme - */ - sk->sk_prot = sk->sk_prot_creator = prot; - sock_lock_init(sk); - sk->sk_net = get_net(net); - } - + if (sk != NULL) { if (security_sk_alloc(sk, family, priority)) goto out_free; if (!try_module_get(prot->owner)) - goto out_free; + goto out_free_sec; } + return sk; +out_free_sec: + security_sk_free(sk); out_free: if (slab != NULL) kmem_cache_free(slab, sk); @@ -905,10 +902,53 @@ out_free: return NULL; } +static void sk_prot_free(struct proto *prot, struct sock *sk) +{ + struct kmem_cache *slab; + struct module *owner; + + owner = prot->owner; + slab = prot->slab; + + security_sk_free(sk); + if (slab != NULL) + kmem_cache_free(slab, sk); + else + kfree(sk); + module_put(owner); +} + +/** + * sk_alloc - All socket objects are allocated here + * @net: the applicable net namespace + * @family: protocol family + * @priority: for allocation (%GFP_KERNEL, %GFP_ATOMIC, etc) + * @prot: struct proto associated with this new sock instance + * @zero_it: if we should zero the newly allocated sock + */ +struct sock *sk_alloc(struct net *net, int family, gfp_t priority, + struct proto *prot) +{ + struct sock *sk; + + sk = sk_prot_alloc(prot, priority | __GFP_ZERO, family); + if (sk) { + sk->sk_family = family; + /* + * See comment in struct sock definition to understand + * why we need sk_prot_creator -acme + */ + sk->sk_prot = sk->sk_prot_creator = prot; + sock_lock_init(sk); + sk->sk_net = get_net(net); + } + + return sk; +} + void sk_free(struct sock *sk) { struct sk_filter *filter; - struct module *owner = sk->sk_prot_creator->owner; if (sk->sk_destruct) sk->sk_destruct(sk); @@ -925,25 +965,22 @@ void sk_free(struct sock *sk) printk(KERN_DEBUG "%s: optmem leakage (%d bytes) detected.\n", __FUNCTION__, atomic_read(&sk->sk_omem_alloc)); - security_sk_free(sk); put_net(sk->sk_net); - if (sk->sk_prot_creator->slab != NULL) - kmem_cache_free(sk->sk_prot_creator->slab, sk); - else - kfree(sk); - module_put(owner); + sk_prot_free(sk->sk_prot_creator, sk); } struct sock *sk_clone(const struct sock *sk, const gfp_t priority) { - struct sock *newsk = sk_alloc(sk->sk_net, sk->sk_family, priority, sk->sk_prot, 0); + struct sock *newsk; + newsk = sk_prot_alloc(sk->sk_prot, priority, sk->sk_family); if (newsk != NULL) { struct sk_filter *filter; sock_copy(newsk, sk); /* SANITY */ + get_net(newsk->sk_net); sk_node_init(&newsk->sk_node); sock_lock_init(newsk); bh_lock_sock(newsk); diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index aabe98d9402..57d57495183 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -474,7 +474,7 @@ static struct proto dn_proto = { static struct sock *dn_alloc_sock(struct net *net, struct socket *sock, gfp_t gfp) { struct dn_scp *scp; - struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto, 1); + struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto); if (!sk) goto out; diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index 9cae16b4e0b..f70df073c58 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -624,7 +624,7 @@ static int econet_create(struct net *net, struct socket *sock, int protocol) sock->state = SS_UNCONNECTED; err = -ENOBUFS; - sk = sk_alloc(net, PF_ECONET, GFP_KERNEL, &econet_proto, 1); + sk = sk_alloc(net, PF_ECONET, GFP_KERNEL, &econet_proto); if (sk == NULL) goto out; diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 621b128897d..d2f22e74b26 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -323,7 +323,7 @@ lookup_protocol: BUG_TRAP(answer_prot->slab != NULL); err = -ENOBUFS; - sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot, 1); + sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot); if (sk == NULL) goto out; diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index cad4278025a..c31bccb9b52 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -111,9 +111,10 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb) goto unlock; } sg_init_table(sg, nfrags); - sg_mark_end(sg, skb_to_sgvec(skb, sg, esph->enc_data + - esp->conf.ivlen - - skb->data, clen)); + skb_to_sgvec(skb, sg, + esph->enc_data + + esp->conf.ivlen - + skb->data, clen); err = crypto_blkcipher_encrypt(&desc, sg, sg, clen); if (unlikely(sg != &esp->sgbuf[0])) kfree(sg); @@ -205,8 +206,9 @@ static int esp_input(struct xfrm_state *x, struct sk_buff *skb) goto out; } sg_init_table(sg, nfrags); - sg_mark_end(sg, skb_to_sgvec(skb, sg, sizeof(*esph) + esp->conf.ivlen, - elen)); + skb_to_sgvec(skb, sg, + sizeof(*esph) + esp->conf.ivlen, + elen); err = crypto_blkcipher_decrypt(&desc, sg, sg, elen); if (unlikely(sg != &esp->sgbuf[0])) kfree(sg); diff --git a/net/ipv4/ipvs/ip_vs_lblcr.c b/net/ipv4/ipvs/ip_vs_lblcr.c index 6a1fec416ea..427b593c106 100644 --- a/net/ipv4/ipvs/ip_vs_lblcr.c +++ b/net/ipv4/ipvs/ip_vs_lblcr.c @@ -48,8 +48,6 @@ /* for sysctl */ #include <linux/fs.h> #include <linux/sysctl.h> -/* for proc_net_create/proc_net_remove */ -#include <linux/proc_fs.h> #include <net/net_namespace.h> #include <net/ip_vs.h> @@ -547,71 +545,6 @@ static void ip_vs_lblcr_check_expire(unsigned long data) mod_timer(&tbl->periodic_timer, jiffies+CHECK_EXPIRE_INTERVAL); } - -#ifdef CONFIG_IP_VS_LBLCR_DEBUG -static struct ip_vs_lblcr_table *lblcr_table_list; - -/* - * /proc/net/ip_vs_lblcr to display the mappings of - * destination IP address <==> its serverSet - */ -static int -ip_vs_lblcr_getinfo(char *buffer, char **start, off_t offset, int length) -{ - off_t pos=0, begin; - int len=0, size; - struct ip_vs_lblcr_table *tbl; - unsigned long now = jiffies; - int i; - struct ip_vs_lblcr_entry *en; - - tbl = lblcr_table_list; - - size = sprintf(buffer, "LastTime Dest IP address Server set\n"); - pos += size; - len += size; - - for (i=0; i<IP_VS_LBLCR_TAB_SIZE; i++) { - read_lock_bh(&tbl->lock); - list_for_each_entry(en, &tbl->bucket[i], list) { - char tbuf[16]; - struct ip_vs_dest_list *d; - - sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(en->addr)); - size = sprintf(buffer+len, "%8lu %-16s ", - now-en->lastuse, tbuf); - - read_lock(&en->set.lock); - for (d=en->set.list; d!=NULL; d=d->next) { - size += sprintf(buffer+len+size, - "%u.%u.%u.%u ", - NIPQUAD(d->dest->addr)); - } - read_unlock(&en->set.lock); - size += sprintf(buffer+len+size, "\n"); - len += size; - pos += size; - if (pos <= offset) - len=0; - if (pos >= offset+length) { - read_unlock_bh(&tbl->lock); - goto done; - } - } - read_unlock_bh(&tbl->lock); - } - - done: - begin = len - (pos - offset); - *start = buffer + begin; - len -= begin; - if(len>length) - len = length; - return len; -} -#endif - - static int ip_vs_lblcr_init_svc(struct ip_vs_service *svc) { int i; @@ -650,9 +583,6 @@ static int ip_vs_lblcr_init_svc(struct ip_vs_service *svc) tbl->periodic_timer.expires = jiffies+CHECK_EXPIRE_INTERVAL; add_timer(&tbl->periodic_timer); -#ifdef CONFIG_IP_VS_LBLCR_DEBUG - lblcr_table_list = tbl; -#endif return 0; } @@ -843,18 +773,12 @@ static int __init ip_vs_lblcr_init(void) { INIT_LIST_HEAD(&ip_vs_lblcr_scheduler.n_list); sysctl_header = register_sysctl_table(lblcr_root_table); -#ifdef CONFIG_IP_VS_LBLCR_DEBUG - proc_net_create(&init_net, "ip_vs_lblcr", 0, ip_vs_lblcr_getinfo); -#endif return register_ip_vs_scheduler(&ip_vs_lblcr_scheduler); } static void __exit ip_vs_lblcr_cleanup(void) { -#ifdef CONFIG_IP_VS_LBLCR_DEBUG - proc_net_remove(&init_net, "ip_vs_lblcr"); -#endif unregister_sysctl_table(sysctl_header); unregister_ip_vs_scheduler(&ip_vs_lblcr_scheduler); } diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c index c99f2a33fb9..0d4d9721cbd 100644 --- a/net/ipv4/ipvs/ip_vs_sync.c +++ b/net/ipv4/ipvs/ip_vs_sync.c @@ -72,7 +72,6 @@ struct ip_vs_sync_thread_data { int state; }; -#define IP_VS_SYNC_CONN_TIMEOUT (3*60*HZ) #define SIMPLE_CONN_SIZE (sizeof(struct ip_vs_sync_conn)) #define FULL_CONN_SIZE \ (sizeof(struct ip_vs_sync_conn) + sizeof(struct ip_vs_sync_conn_options)) @@ -284,6 +283,7 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen) struct ip_vs_sync_conn *s; struct ip_vs_sync_conn_options *opt; struct ip_vs_conn *cp; + struct ip_vs_protocol *pp; char *p; int i; @@ -342,7 +342,8 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen) p += SIMPLE_CONN_SIZE; atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]); - cp->timeout = IP_VS_SYNC_CONN_TIMEOUT; + pp = ip_vs_proto_get(s->protocol); + cp->timeout = pp->timeout_table[cp->state]; ip_vs_conn_put(cp); if (p > buffer+buflen) { diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index fa97947c6ae..9aca9c55687 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -128,7 +128,7 @@ config IP_NF_MATCH_ADDRTYPE eg. UNICAST, LOCAL, BROADCAST, ... If you want to compile it as a module, say M here and read - <file:Documentation/modules.txt>. If unsure, say `N'. + <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. # `filter', generic and specific targets config IP_NF_FILTER @@ -371,7 +371,7 @@ config IP_NF_RAW and OUTPUT chains. If you want to compile it as a module, say M here and read - <file:Documentation/modules.txt>. If unsure, say `N'. + <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. # ARP tables config IP_NF_ARPTABLES diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 9be0daa9c0e..ffdccc0972e 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -304,7 +304,7 @@ static void icmp_put(struct seq_file *seq) for (i=0; icmpmibmap[i].name != NULL; i++) seq_printf(seq, " %lu", snmp_fold_field((void **) icmpmsg_statistics, - icmpmibmap[i].index)); + icmpmibmap[i].index | 0x100)); } /* diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 2e6ad6dbba6..c64072bb504 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2453,7 +2453,7 @@ void __init tcp_init(void) 0, &tcp_hashinfo.ehash_size, NULL, - 0); + thash_entries ? 0 : 512 * 1024); tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size; for (i = 0; i < tcp_hashinfo.ehash_size; i++) { rwlock_init(&tcp_hashinfo.ehash[i].lock); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 69d8c38ccd3..ca9590f4f52 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1330,12 +1330,15 @@ tcp_sacktag_write_queue(struct sock *sk, struct sk_buff *ack_skb, u32 prior_snd_ cached_fack_count = 0; } - for (i=0; i<num_sacks; i++, sp++) { + for (i = 0; i < num_sacks; i++) { struct sk_buff *skb; __u32 start_seq = ntohl(sp->start_seq); __u32 end_seq = ntohl(sp->end_seq); int fack_count; int dup_sack = (found_dup_sack && (i == first_sack_index)); + int next_dup = (found_dup_sack && (i+1 == first_sack_index)); + + sp++; if (!tcp_is_sackblock_valid(tp, dup_sack, start_seq, end_seq)) { if (dup_sack) { @@ -1361,7 +1364,7 @@ tcp_sacktag_write_queue(struct sock *sk, struct sk_buff *ack_skb, u32 prior_snd_ flag |= FLAG_DATA_LOST; tcp_for_write_queue_from(skb, sk) { - int in_sack; + int in_sack = 0; u8 sacked; if (skb == tcp_send_head(sk)) @@ -1380,7 +1383,23 @@ tcp_sacktag_write_queue(struct sock *sk, struct sk_buff *ack_skb, u32 prior_snd_ if (!before(TCP_SKB_CB(skb)->seq, end_seq)) break; - in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq); + dup_sack = (found_dup_sack && (i == first_sack_index)); + + /* Due to sorting DSACK may reside within this SACK block! */ + if (next_dup) { + u32 dup_start = ntohl(sp->start_seq); + u32 dup_end = ntohl(sp->end_seq); + + if (before(TCP_SKB_CB(skb)->seq, dup_end)) { + in_sack = tcp_match_skb_to_sack(sk, skb, dup_start, dup_end); + if (in_sack > 0) + dup_sack = 1; + } + } + + /* DSACK info lost if out-of-mem, try SACK still */ + if (in_sack <= 0) + in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq); if (in_sack < 0) break; @@ -2059,7 +2078,7 @@ static void tcp_update_scoreboard(struct sock *sk) if (!tcp_skb_timedout(sk, skb)) break; - if (!(TCP_SKB_CB(skb)->sacked&TCPCB_TAGBITS)) { + if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_SACKED_ACKED|TCPCB_LOST))) { TCP_SKB_CB(skb)->sacked |= TCPCB_LOST; tp->lost_out += tcp_skb_pcount(skb); tcp_verify_retransmit_hint(tp, skb); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index ad759f1c377..eec02b29ffc 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -858,16 +858,16 @@ int tcp_v4_md5_do_add(struct sock *sk, __be32 addr, u8 *newkey, u8 newkeylen) { /* Add Key to the list */ - struct tcp4_md5sig_key *key; + struct tcp_md5sig_key *key; struct tcp_sock *tp = tcp_sk(sk); struct tcp4_md5sig_key *keys; - key = (struct tcp4_md5sig_key *)tcp_v4_md5_do_lookup(sk, addr); + key = tcp_v4_md5_do_lookup(sk, addr); if (key) { /* Pre-existing entry - just update that one. */ - kfree(key->base.key); - key->base.key = newkey; - key->base.keylen = newkeylen; + kfree(key->key); + key->key = newkey; + key->keylen = newkeylen; } else { struct tcp_md5sig_info *md5sig; @@ -1083,7 +1083,7 @@ static int tcp_v4_do_calc_md5_hash(char *md5_hash, struct tcp_md5sig_key *key, sg_set_buf(&sg[block++], key->key, key->keylen); nbytes += key->keylen; - sg_mark_end(sg, block); + __sg_mark_end(&sg[block - 1]); /* Now store the Hash into the packet */ err = crypto_hash_init(desc); diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c index b49dedcda52..007304e9984 100644 --- a/net/ipv4/tcp_vegas.c +++ b/net/ipv4/tcp_vegas.c @@ -266,26 +266,25 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, */ diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd; - if (tp->snd_cwnd <= tp->snd_ssthresh) { - /* Slow start. */ - if (diff > gamma) { - /* Going too fast. Time to slow down - * and switch to congestion avoidance. - */ - tp->snd_ssthresh = 2; - - /* Set cwnd to match the actual rate - * exactly: - * cwnd = (actual rate) * baseRTT - * Then we add 1 because the integer - * truncation robs us of full link - * utilization. - */ - tp->snd_cwnd = min(tp->snd_cwnd, - (target_cwnd >> - V_PARAM_SHIFT)+1); + if (diff > gamma && tp->snd_ssthresh > 2 ) { + /* Going too fast. Time to slow down + * and switch to congestion avoidance. + */ + tp->snd_ssthresh = 2; + + /* Set cwnd to match the actual rate + * exactly: + * cwnd = (actual rate) * baseRTT + * Then we add 1 because the integer + * truncation robs us of full link + * utilization. + */ + tp->snd_cwnd = min(tp->snd_cwnd, + (target_cwnd >> + V_PARAM_SHIFT)+1); - } + } else if (tp->snd_cwnd <= tp->snd_ssthresh) { + /* Slow start. */ tcp_slow_start(tp); } else { /* Congestion avoidance. */ diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 348bd8d0611..1bd8d818f8e 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4288,8 +4288,4 @@ void __exit addrconf_cleanup(void) del_timer(&addr_chk_timer); rtnl_unlock(); - -#ifdef CONFIG_PROC_FS - proc_net_remove(&init_net, "if_inet6"); -#endif } diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 1b1caf3aa1c..ecbd38894fd 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -162,7 +162,7 @@ lookup_protocol: BUG_TRAP(answer_prot->slab != NULL); err = -ENOBUFS; - sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot, 1); + sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot); if (sk == NULL) goto out; diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index ab17b5e6235..7db66f10e00 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -110,9 +110,10 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) goto unlock; } sg_init_table(sg, nfrags); - sg_mark_end(sg, skb_to_sgvec(skb, sg, esph->enc_data + - esp->conf.ivlen - - skb->data, clen)); + skb_to_sgvec(skb, sg, + esph->enc_data + + esp->conf.ivlen - + skb->data, clen); err = crypto_blkcipher_encrypt(&desc, sg, sg, clen); if (unlikely(sg != &esp->sgbuf[0])) kfree(sg); @@ -209,9 +210,9 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb) } } sg_init_table(sg, nfrags); - sg_mark_end(sg, skb_to_sgvec(skb, sg, - sizeof(*esph) + esp->conf.ivlen, - elen)); + skb_to_sgvec(skb, sg, + sizeof(*esph) + esp->conf.ivlen, + elen); ret = crypto_blkcipher_decrypt(&desc, sg, sg, elen); if (unlikely(sg != &esp->sgbuf[0])) kfree(sg); diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 20cfc90d559..36f7dbfb6db 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1670,7 +1670,7 @@ int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, struct file * f filp, buffer, lenp, ppos); else if ((strcmp(ctl->procname, "retrans_time_ms") == 0) || - (strcmp(ctl->procname, "base_reacable_time_ms") == 0)) + (strcmp(ctl->procname, "base_reachable_time_ms") == 0)) ret = proc_dointvec_ms_jiffies(ctl, write, filp, buffer, lenp, ppos); else diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 85208026278..4b903288095 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -561,16 +561,16 @@ static int tcp_v6_md5_do_add(struct sock *sk, struct in6_addr *peer, char *newkey, u8 newkeylen) { /* Add key to the list */ - struct tcp6_md5sig_key *key; + struct tcp_md5sig_key *key; struct tcp_sock *tp = tcp_sk(sk); struct tcp6_md5sig_key *keys; - key = (struct tcp6_md5sig_key*) tcp_v6_md5_do_lookup(sk, peer); + key = tcp_v6_md5_do_lookup(sk, peer); if (key) { /* modify existing entry - just update that one */ - kfree(key->base.key); - key->base.key = newkey; - key->base.keylen = newkeylen; + kfree(key->key); + key->key = newkey; + key->keylen = newkeylen; } else { /* reallocate new list if current one is full. */ if (!tp->md5sig_info) { @@ -781,7 +781,7 @@ static int tcp_v6_do_calc_md5_hash(char *md5_hash, struct tcp_md5sig_key *key, sg_set_buf(&sg[block++], key->key, key->keylen); nbytes += key->keylen; - sg_mark_end(sg, block); + __sg_mark_end(&sg[block - 1]); /* Now store the hash into the packet */ err = crypto_hash_init(desc); diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c index 29b063d4312..a195a66e0cc 100644 --- a/net/ipx/af_ipx.c +++ b/net/ipx/af_ipx.c @@ -1381,7 +1381,7 @@ static int ipx_create(struct net *net, struct socket *sock, int protocol) goto out; rc = -ENOMEM; - sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto, 1); + sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto); if (!sk) goto out; #ifdef IPX_REFCNT_DEBUG diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index 0328ae2654f..48ce59a6e02 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -1078,7 +1078,7 @@ static int irda_create(struct net *net, struct socket *sock, int protocol) } /* Allocate networking socket */ - sk = sk_alloc(net, PF_IRDA, GFP_ATOMIC, &irda_proto, 1); + sk = sk_alloc(net, PF_IRDA, GFP_ATOMIC, &irda_proto); if (sk == NULL) return -ENOMEM; diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c index 2f9f8dce5a6..e0eab5927c4 100644 --- a/net/irda/irnet/irnet_ppp.c +++ b/net/irda/irnet/irnet_ppp.c @@ -731,15 +731,25 @@ dev_irnet_ioctl(struct inode * inode, /* Get termios */ case TCGETS: DEBUG(FS_INFO, "Get termios.\n"); +#ifndef TCGETS2 if(kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios)) break; +#else + if(kernel_termios_to_user_termios_1((struct termios __user *)argp, &ap->termios)) + break; +#endif err = 0; break; /* Set termios */ case TCSETSF: DEBUG(FS_INFO, "Set termios.\n"); +#ifndef TCGETS2 if(user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp)) break; +#else + if(user_termios_to_kernel_termios_1(&ap->termios, (struct termios __user *)argp)) + break; +#endif err = 0; break; diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 43e01c8d382..aef66458035 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -216,7 +216,7 @@ static struct sock *iucv_sock_alloc(struct socket *sock, int proto, gfp_t prio) { struct sock *sk; - sk = sk_alloc(&init_net, PF_IUCV, prio, &iucv_proto, 1); + sk = sk_alloc(&init_net, PF_IUCV, prio, &iucv_proto); if (!sk) return NULL; diff --git a/net/key/af_key.c b/net/key/af_key.c index 7969f8a716d..10c89d47f68 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -152,7 +152,7 @@ static int pfkey_create(struct net *net, struct socket *sock, int protocol) return -EPROTONOSUPPORT; err = -ENOMEM; - sk = sk_alloc(net, PF_KEY, GFP_KERNEL, &key_proto, 1); + sk = sk_alloc(net, PF_KEY, GFP_KERNEL, &key_proto); if (sk == NULL) goto out; @@ -395,9 +395,9 @@ static inline int pfkey_sec_ctx_len(struct sadb_x_sec_ctx *sec_ctx) static inline int verify_sec_ctx_len(void *p) { struct sadb_x_sec_ctx *sec_ctx = (struct sadb_x_sec_ctx *)p; - int len; + int len = sec_ctx->sadb_x_ctx_len; - if (sec_ctx->sadb_x_ctx_len > PAGE_SIZE) + if (len > PAGE_SIZE) return -EINVAL; len = pfkey_sec_ctx_len(sec_ctx); diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c index 8ebc2769dfd..5c0b484237c 100644 --- a/net/llc/llc_conn.c +++ b/net/llc/llc_conn.c @@ -869,7 +869,7 @@ static void llc_sk_init(struct sock* sk) */ struct sock *llc_sk_alloc(struct net *net, int family, gfp_t priority, struct proto *prot) { - struct sock *sk = sk_alloc(net, family, priority, prot, 1); + struct sock *sk = sk_alloc(net, family, priority, prot); if (!sk) goto out; diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index d7a600a5720..21a9fcc0379 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -363,7 +363,7 @@ config NETFILTER_XT_TARGET_TRACE the tables, chains, rules. If you want to compile it as a module, say M here and read - <file:Documentation/modules.txt>. If unsure, say `N'. + <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. config NETFILTER_XT_TARGET_SECMARK tristate '"SECMARK" target support' diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 4d6171bc082..000c2fb462d 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -999,7 +999,7 @@ struct hlist_head *nf_ct_alloc_hashtable(int *sizep, int *vmalloced) *vmalloced = 0; size = *sizep = roundup(*sizep, PAGE_SIZE / sizeof(struct hlist_head)); - hash = (void*)__get_free_pages(GFP_KERNEL, + hash = (void*)__get_free_pages(GFP_KERNEL|__GFP_NOWARN, get_order(sizeof(struct hlist_head) * size)); if (!hash) { diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 4f994c0fb3f..26017125557 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -396,7 +396,7 @@ static int __netlink_create(struct net *net, struct socket *sock, sock->ops = &netlink_ops; - sk = sk_alloc(net, PF_NETLINK, GFP_KERNEL, &netlink_proto, 1); + sk = sk_alloc(net, PF_NETLINK, GFP_KERNEL, &netlink_proto); if (!sk) return -ENOMEM; diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 3a4d479ea64..972250c974f 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -423,7 +423,8 @@ static int nr_create(struct net *net, struct socket *sock, int protocol) if (sock->type != SOCK_SEQPACKET || protocol != 0) return -ESOCKTNOSUPPORT; - if ((sk = sk_alloc(net, PF_NETROM, GFP_ATOMIC, &nr_proto, 1)) == NULL) + sk = sk_alloc(net, PF_NETROM, GFP_ATOMIC, &nr_proto); + if (sk == NULL) return -ENOMEM; nr = nr_sk(sk); @@ -465,7 +466,8 @@ static struct sock *nr_make_new(struct sock *osk) if (osk->sk_type != SOCK_SEQPACKET) return NULL; - if ((sk = sk_alloc(osk->sk_net, PF_NETROM, GFP_ATOMIC, osk->sk_prot, 1)) == NULL) + sk = sk_alloc(osk->sk_net, PF_NETROM, GFP_ATOMIC, osk->sk_prot); + if (sk == NULL) return NULL; nr = nr_sk(sk); diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index d0936506b73..4cb2dfba099 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -995,7 +995,7 @@ static int packet_create(struct net *net, struct socket *sock, int protocol) sock->state = SS_UNCONNECTED; err = -ENOBUFS; - sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto, 1); + sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto); if (sk == NULL) goto out; diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 509defe53ee..ed2d65cd801 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -513,7 +513,8 @@ static int rose_create(struct net *net, struct socket *sock, int protocol) if (sock->type != SOCK_SEQPACKET || protocol != 0) return -ESOCKTNOSUPPORT; - if ((sk = sk_alloc(net, PF_ROSE, GFP_ATOMIC, &rose_proto, 1)) == NULL) + sk = sk_alloc(net, PF_ROSE, GFP_ATOMIC, &rose_proto); + if (sk == NULL) return -ENOMEM; rose = rose_sk(sk); @@ -551,7 +552,8 @@ static struct sock *rose_make_new(struct sock *osk) if (osk->sk_type != SOCK_SEQPACKET) return NULL; - if ((sk = sk_alloc(osk->sk_net, PF_ROSE, GFP_ATOMIC, &rose_proto, 1)) == NULL) + sk = sk_alloc(osk->sk_net, PF_ROSE, GFP_ATOMIC, &rose_proto); + if (sk == NULL) return NULL; rose = rose_sk(sk); diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index c680017f5c8..d6389450c4b 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -627,7 +627,7 @@ static int rxrpc_create(struct net *net, struct socket *sock, int protocol) sock->ops = &rxrpc_rpc_ops; sock->state = SS_UNCONNECTED; - sk = sk_alloc(net, PF_RXRPC, GFP_KERNEL, &rxrpc_proto, 1); + sk = sk_alloc(net, PF_RXRPC, GFP_KERNEL, &rxrpc_proto); if (!sk) return -ENOMEM; diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c index eebefb6ef13..c387cf68a08 100644 --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -237,7 +237,8 @@ static int rxkad_secure_packet_encrypt(const struct rxrpc_call *call, len = data_size + call->conn->size_align - 1; len &= ~(call->conn->size_align - 1); - sg_init_table(sg, skb_to_sgvec(skb, sg, 0, len)); + sg_init_table(sg, nsg); + skb_to_sgvec(skb, sg, 0, len); crypto_blkcipher_encrypt_iv(&desc, sg, sg, len); _leave(" = 0"); @@ -344,7 +345,7 @@ static int rxkad_verify_packet_auth(const struct rxrpc_call *call, goto nomem; sg_init_table(sg, nsg); - sg_mark_end(sg, skb_to_sgvec(skb, sg, 0, 8)); + skb_to_sgvec(skb, sg, 0, 8); /* start the decryption afresh */ memset(&iv, 0, sizeof(iv)); @@ -426,7 +427,7 @@ static int rxkad_verify_packet_encrypt(const struct rxrpc_call *call, } sg_init_table(sg, nsg); - sg_mark_end(sg, skb_to_sgvec(skb, sg, 0, skb->len)); + skb_to_sgvec(skb, sg, 0, skb->len); /* decrypt from the session key */ payload = call->conn->key->payload.data; @@ -701,7 +702,7 @@ static void rxkad_sg_set_buf2(struct scatterlist sg[2], nsg++; } - sg_mark_end(sg, nsg); + __sg_mark_end(&sg[nsg - 1]); ASSERTCMP(sg[0].length + sg[1].length, ==, buflen); } diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index eb4deaf5891..7f31ff638bc 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -631,7 +631,7 @@ static struct sock *sctp_v6_create_accept_sk(struct sock *sk, struct ipv6_pinfo *newnp, *np = inet6_sk(sk); struct sctp6_sock *newsctp6sk; - newsk = sk_alloc(sk->sk_net, PF_INET6, GFP_KERNEL, sk->sk_prot, 1); + newsk = sk_alloc(sk->sk_net, PF_INET6, GFP_KERNEL, sk->sk_prot); if (!newsk) goto out; diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index f5cd96f5fe7..40c1a47d1b8 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -552,7 +552,8 @@ static struct sock *sctp_v4_create_accept_sk(struct sock *sk, { struct inet_sock *inet = inet_sk(sk); struct inet_sock *newinet; - struct sock *newsk = sk_alloc(sk->sk_net, PF_INET, GFP_KERNEL, sk->sk_prot, 1); + struct sock *newsk = sk_alloc(sk->sk_net, PF_INET, GFP_KERNEL, + sk->sk_prot); if (!newsk) goto out; diff --git a/net/socket.c b/net/socket.c index 540013ea862..5d879fd3d01 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1250,11 +1250,14 @@ asmlinkage long sys_socketpair(int family, int type, int protocol, goto out_release_both; fd1 = sock_alloc_fd(&newfile1); - if (unlikely(fd1 < 0)) + if (unlikely(fd1 < 0)) { + err = fd1; goto out_release_both; + } fd2 = sock_alloc_fd(&newfile2); if (unlikely(fd2 < 0)) { + err = fd2; put_filp(newfile1); put_unused_fd(fd1); goto out_release_both; diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c index 91cd8f0d1e1..ab7cbd6575c 100644 --- a/net/sunrpc/auth_gss/gss_krb5_crypto.c +++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c @@ -211,8 +211,8 @@ encryptor(struct scatterlist *sg, void *data) if (thislen == 0) return 0; - sg_mark_end(desc->infrags, desc->fragno); - sg_mark_end(desc->outfrags, desc->fragno); + __sg_mark_end(&desc->infrags[desc->fragno - 1]); + __sg_mark_end(&desc->outfrags[desc->fragno - 1]); ret = crypto_blkcipher_encrypt_iv(&desc->desc, desc->outfrags, desc->infrags, thislen); @@ -293,7 +293,7 @@ decryptor(struct scatterlist *sg, void *data) if (thislen == 0) return 0; - sg_mark_end(desc->frags, desc->fragno); + __sg_mark_end(&desc->frags[desc->fragno - 1]); ret = crypto_blkcipher_decrypt_iv(&desc->desc, desc->frags, desc->frags, thislen); diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c index 864b541bbf5..2be714e9b38 100644 --- a/net/sunrpc/sysctl.c +++ b/net/sunrpc/sysctl.c @@ -87,9 +87,8 @@ proc_dodebug(ctl_table *table, int write, struct file *file, left--, s++; *(unsigned int *) table->data = value; /* Display the RPC tasks on writing to rpc_debug */ - if (table->ctl_name == CTL_RPCDEBUG) { + if (strcmp(table->procname, "rpc_debug") == 0) rpc_show_tasks(); - } } else { if (!access_ok(VERIFY_WRITE, buffer, left)) return -EFAULT; diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c index f877b88091c..9e11ce71595 100644 --- a/net/sunrpc/xprtrdma/rpc_rdma.c +++ b/net/sunrpc/xprtrdma/rpc_rdma.c @@ -221,8 +221,8 @@ rpcrdma_create_chunks(struct rpc_rqst *rqst, struct xdr_buf *target, seg->mr_base); dprintk("RPC: %s: read chunk " "elem %d@0x%llx:0x%x pos %d (%s)\n", __func__, - seg->mr_len, seg->mr_base, seg->mr_rkey, pos, - n < nsegs ? "more" : "last"); + seg->mr_len, (unsigned long long)seg->mr_base, + seg->mr_rkey, pos, n < nsegs ? "more" : "last"); cur_rchunk++; r_xprt->rx_stats.read_chunk_count++; } else { /* write/reply */ @@ -234,8 +234,8 @@ rpcrdma_create_chunks(struct rpc_rqst *rqst, struct xdr_buf *target, dprintk("RPC: %s: %s chunk " "elem %d@0x%llx:0x%x (%s)\n", __func__, (type == rpcrdma_replych) ? "reply" : "write", - seg->mr_len, seg->mr_base, seg->mr_rkey, - n < nsegs ? "more" : "last"); + seg->mr_len, (unsigned long long)seg->mr_base, + seg->mr_rkey, n < nsegs ? "more" : "last"); cur_wchunk++; if (type == rpcrdma_replych) r_xprt->rx_stats.reply_chunk_count++; @@ -577,7 +577,7 @@ rpcrdma_count_chunks(struct rpcrdma_rep *rep, int max, int wrchunk, __be32 **ipt dprintk("RPC: %s: chunk %d@0x%llx:0x%x\n", __func__, ntohl(seg->rs_length), - off, + (unsigned long long)off, ntohl(seg->rs_handle)); } total_len += ntohl(seg->rs_length); diff --git a/net/tipc/socket.c b/net/tipc/socket.c index e36b4b5a522..6b792265dc0 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -201,7 +201,7 @@ static int tipc_create(struct net *net, struct socket *sock, int protocol) return -EPROTOTYPE; } - sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto, 1); + sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto); if (!sk) { tipc_deleteport(ref); return -ENOMEM; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 9163ec526c2..515e7a692f9 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -602,7 +602,7 @@ static struct sock * unix_create1(struct net *net, struct socket *sock) if (atomic_read(&unix_nr_socks) >= 2*get_max_files()) goto out; - sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto, 1); + sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto); if (!sk) goto out; diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index fc416f9606a..92cfe8e3e0b 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -472,7 +472,7 @@ static struct proto x25_proto = { static struct sock *x25_alloc_socket(struct net *net) { struct x25_sock *x25; - struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto, 1); + struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto); if (!sk) goto out; |