diff options
146 files changed, 6652 insertions, 5694 deletions
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index 239fc42fb8d..dc6e474229b 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -202,7 +202,6 @@ static void elmc_xmt_int(struct net_device *dev); static void elmc_rnr_int(struct net_device *dev); struct priv { - struct net_device_stats stats; unsigned long base; char *memtop; unsigned long mapped_start; /* Start of ioremap */ @@ -989,18 +988,18 @@ static void elmc_rcv_int(struct net_device *dev) skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); dev->last_rx = jiffies; - p->stats.rx_packets++; - p->stats.rx_bytes += totlen; + dev->stats.rx_packets++; + dev->stats.rx_bytes += totlen; } else { - p->stats.rx_dropped++; + dev->stats.rx_dropped++; } } else { printk(KERN_WARNING "%s: received oversized frame.\n", dev->name); - p->stats.rx_dropped++; + dev->stats.rx_dropped++; } } else { /* frame !(ok), only with 'save-bad-frames' */ printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status); - p->stats.rx_errors++; + dev->stats.rx_errors++; } p->rfd_top->status = 0; p->rfd_top->last = RFD_SUSP; @@ -1018,7 +1017,7 @@ static void elmc_rnr_int(struct net_device *dev) { struct priv *p = (struct priv *) dev->priv; - p->stats.rx_errors++; + dev->stats.rx_errors++; WAIT_4_SCB_CMD(); /* wait for the last cmd */ p->scb->cmd = RUC_ABORT; /* usually the RU is in the 'no resource'-state .. abort it now. */ @@ -1046,24 +1045,24 @@ static void elmc_xmt_int(struct net_device *dev) printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); } if (status & STAT_OK) { - p->stats.tx_packets++; - p->stats.collisions += (status & TCMD_MAXCOLLMASK); + dev->stats.tx_packets++; + dev->stats.collisions += (status & TCMD_MAXCOLLMASK); } else { - p->stats.tx_errors++; + dev->stats.tx_errors++; if (status & TCMD_LATECOLL) { printk(KERN_WARNING "%s: late collision detected.\n", dev->name); - p->stats.collisions++; + dev->stats.collisions++; } else if (status & TCMD_NOCARRIER) { - p->stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; printk(KERN_WARNING "%s: no carrier detected.\n", dev->name); } else if (status & TCMD_LOSTCTS) { printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name); } else if (status & TCMD_UNDERRUN) { - p->stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name); } else if (status & TCMD_MAXCOLL) { printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name); - p->stats.collisions += 16; + dev->stats.collisions += 16; } } @@ -1215,12 +1214,12 @@ static struct net_device_stats *elmc_get_stats(struct net_device *dev) ovrn = p->scb->ovrn_errs; p->scb->ovrn_errs -= ovrn; - p->stats.rx_crc_errors += crc; - p->stats.rx_fifo_errors += ovrn; - p->stats.rx_frame_errors += aln; - p->stats.rx_dropped += rsc; + dev->stats.rx_crc_errors += crc; + dev->stats.rx_fifo_errors += ovrn; + dev->stats.rx_frame_errors += aln; + dev->stats.rx_dropped += rsc; - return &p->stats; + return &dev->stats; } /******************************************************** diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index fae295b6809..6aca0c640f1 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -158,7 +158,6 @@ struct mc32_local int slot; u32 base; - struct net_device_stats net_stats; volatile struct mc32_mailbox *rx_box; volatile struct mc32_mailbox *tx_box; volatile struct mc32_mailbox *exec_box; @@ -1093,24 +1092,24 @@ static void mc32_update_stats(struct net_device *dev) u32 rx_errors=0; - rx_errors+=lp->net_stats.rx_crc_errors +=st->rx_crc_errors; + rx_errors+=dev->stats.rx_crc_errors +=st->rx_crc_errors; st->rx_crc_errors=0; - rx_errors+=lp->net_stats.rx_fifo_errors +=st->rx_overrun_errors; + rx_errors+=dev->stats.rx_fifo_errors +=st->rx_overrun_errors; st->rx_overrun_errors=0; - rx_errors+=lp->net_stats.rx_frame_errors +=st->rx_alignment_errors; + rx_errors+=dev->stats.rx_frame_errors +=st->rx_alignment_errors; st->rx_alignment_errors=0; - rx_errors+=lp->net_stats.rx_length_errors+=st->rx_tooshort_errors; + rx_errors+=dev->stats.rx_length_errors+=st->rx_tooshort_errors; st->rx_tooshort_errors=0; - rx_errors+=lp->net_stats.rx_missed_errors+=st->rx_outofresource_errors; + rx_errors+=dev->stats.rx_missed_errors+=st->rx_outofresource_errors; st->rx_outofresource_errors=0; - lp->net_stats.rx_errors=rx_errors; + dev->stats.rx_errors=rx_errors; /* Number of packets which saw one collision */ - lp->net_stats.collisions+=st->dataC[10]; + dev->stats.collisions+=st->dataC[10]; st->dataC[10]=0; /* Number of packets which saw 2--15 collisions */ - lp->net_stats.collisions+=st->dataC[11]; + dev->stats.collisions+=st->dataC[11]; st->dataC[11]=0; } @@ -1178,7 +1177,7 @@ static void mc32_rx_ring(struct net_device *dev) skb=dev_alloc_skb(length+2); if(skb==NULL) { - lp->net_stats.rx_dropped++; + dev->stats.rx_dropped++; goto dropped; } @@ -1189,8 +1188,8 @@ static void mc32_rx_ring(struct net_device *dev) skb->protocol=eth_type_trans(skb,dev); dev->last_rx = jiffies; - lp->net_stats.rx_packets++; - lp->net_stats.rx_bytes += length; + dev->stats.rx_packets++; + dev->stats.rx_bytes += length; netif_rx(skb); } @@ -1253,34 +1252,34 @@ static void mc32_tx_ring(struct net_device *dev) /* Not COMPLETED */ break; } - lp->net_stats.tx_packets++; + dev->stats.tx_packets++; if(!(np->status & (1<<6))) /* Not COMPLETED_OK */ { - lp->net_stats.tx_errors++; + dev->stats.tx_errors++; switch(np->status&0x0F) { case 1: - lp->net_stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; break; /* Max collisions */ case 2: - lp->net_stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; break; case 3: - lp->net_stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; break; case 4: - lp->net_stats.tx_window_errors++; + dev->stats.tx_window_errors++; break; /* CTS Lost */ case 5: - lp->net_stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; break; /* Transmit timeout */ } } /* Packets are sent in order - this is basically a FIFO queue of buffers matching the card ring */ - lp->net_stats.tx_bytes+=lp->tx_ring[t].skb->len; + dev->stats.tx_bytes+=lp->tx_ring[t].skb->len; dev_kfree_skb_irq(lp->tx_ring[t].skb); lp->tx_ring[t].skb=NULL; atomic_inc(&lp->tx_count); @@ -1367,7 +1366,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id) case 6: /* Out of RX buffers stat */ /* Must restart rx */ - lp->net_stats.rx_dropped++; + dev->stats.rx_dropped++; mc32_rx_ring(dev); mc32_start_transceiver(dev); break; @@ -1489,10 +1488,8 @@ static int mc32_close(struct net_device *dev) static struct net_device_stats *mc32_get_stats(struct net_device *dev) { - struct mc32_local *lp = netdev_priv(dev); - mc32_update_stats(dev); - return &lp->net_stats; + return &dev->stats; } diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index a453eda834d..934db350e33 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -340,7 +340,6 @@ struct cp_private { u32 rx_config; u16 cpcmd; - struct net_device_stats net_stats; struct cp_extra_stats cp_stats; unsigned rx_head ____cacheline_aligned; @@ -457,8 +456,8 @@ static inline void cp_rx_skb (struct cp_private *cp, struct sk_buff *skb, { skb->protocol = eth_type_trans (skb, cp->dev); - cp->net_stats.rx_packets++; - cp->net_stats.rx_bytes += skb->len; + cp->dev->stats.rx_packets++; + cp->dev->stats.rx_bytes += skb->len; cp->dev->last_rx = jiffies; #if CP_VLAN_TAG_USED @@ -477,17 +476,17 @@ static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail, printk (KERN_DEBUG "%s: rx err, slot %d status 0x%x len %d\n", cp->dev->name, rx_tail, status, len); - cp->net_stats.rx_errors++; + cp->dev->stats.rx_errors++; if (status & RxErrFrame) - cp->net_stats.rx_frame_errors++; + cp->dev->stats.rx_frame_errors++; if (status & RxErrCRC) - cp->net_stats.rx_crc_errors++; + cp->dev->stats.rx_crc_errors++; if ((status & RxErrRunt) || (status & RxErrLong)) - cp->net_stats.rx_length_errors++; + cp->dev->stats.rx_length_errors++; if ((status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag)) - cp->net_stats.rx_length_errors++; + cp->dev->stats.rx_length_errors++; if (status & RxErrFIFO) - cp->net_stats.rx_fifo_errors++; + cp->dev->stats.rx_fifo_errors++; } static inline unsigned int cp_rx_csum_ok (u32 status) @@ -539,7 +538,7 @@ rx_status_loop: * that RX fragments are never encountered */ cp_rx_err_acct(cp, rx_tail, status, len); - cp->net_stats.rx_dropped++; + dev->stats.rx_dropped++; cp->cp_stats.rx_frags++; goto rx_next; } @@ -556,7 +555,7 @@ rx_status_loop: buflen = cp->rx_buf_sz + RX_OFFSET; new_skb = dev_alloc_skb (buflen); if (!new_skb) { - cp->net_stats.rx_dropped++; + dev->stats.rx_dropped++; goto rx_next; } @@ -710,20 +709,20 @@ static void cp_tx (struct cp_private *cp) if (netif_msg_tx_err(cp)) printk(KERN_DEBUG "%s: tx err, status 0x%x\n", cp->dev->name, status); - cp->net_stats.tx_errors++; + cp->dev->stats.tx_errors++; if (status & TxOWC) - cp->net_stats.tx_window_errors++; + cp->dev->stats.tx_window_errors++; if (status & TxMaxCol) - cp->net_stats.tx_aborted_errors++; + cp->dev->stats.tx_aborted_errors++; if (status & TxLinkFail) - cp->net_stats.tx_carrier_errors++; + cp->dev->stats.tx_carrier_errors++; if (status & TxFIFOUnder) - cp->net_stats.tx_fifo_errors++; + cp->dev->stats.tx_fifo_errors++; } else { - cp->net_stats.collisions += + cp->dev->stats.collisions += ((status >> TxColCntShift) & TxColCntMask); - cp->net_stats.tx_packets++; - cp->net_stats.tx_bytes += skb->len; + cp->dev->stats.tx_packets++; + cp->dev->stats.tx_bytes += skb->len; if (netif_msg_tx_done(cp)) printk(KERN_DEBUG "%s: tx done, slot %d\n", cp->dev->name, tx_tail); } @@ -956,7 +955,7 @@ static void cp_set_rx_mode (struct net_device *dev) static void __cp_get_stats(struct cp_private *cp) { /* only lower 24 bits valid; write any value to clear */ - cp->net_stats.rx_missed_errors += (cpr32 (RxMissed) & 0xffffff); + cp->dev->stats.rx_missed_errors += (cpr32 (RxMissed) & 0xffffff); cpw32 (RxMissed, 0); } @@ -971,7 +970,7 @@ static struct net_device_stats *cp_get_stats(struct net_device *dev) __cp_get_stats(cp); spin_unlock_irqrestore(&cp->lock, flags); - return &cp->net_stats; + return &dev->stats; } static void cp_stop_hw (struct cp_private *cp) @@ -1142,7 +1141,7 @@ static void cp_clean_rings (struct cp_private *cp) PCI_DMA_TODEVICE); if (le32_to_cpu(desc->opts1) & LastFrag) dev_kfree_skb(skb); - cp->net_stats.tx_dropped++; + cp->dev->stats.tx_dropped++; } } diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 53bd903d232..b23a00c5b84 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -574,7 +574,6 @@ struct rtl8139_private { u32 msg_enable; struct napi_struct napi; struct net_device *dev; - struct net_device_stats stats; unsigned char *rx_ring; unsigned int cur_rx; /* RX buf index of next pkt */ @@ -1711,7 +1710,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) dev_kfree_skb(skb); } else { dev_kfree_skb(skb); - tp->stats.tx_dropped++; + dev->stats.tx_dropped++; return 0; } @@ -1762,27 +1761,27 @@ static void rtl8139_tx_interrupt (struct net_device *dev, if (netif_msg_tx_err(tp)) printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n", dev->name, txstatus); - tp->stats.tx_errors++; + dev->stats.tx_errors++; if (txstatus & TxAborted) { - tp->stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; RTL_W32 (TxConfig, TxClearAbt); RTL_W16 (IntrStatus, TxErr); wmb(); } if (txstatus & TxCarrierLost) - tp->stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; if (txstatus & TxOutOfWindow) - tp->stats.tx_window_errors++; + dev->stats.tx_window_errors++; } else { if (txstatus & TxUnderrun) { /* Add 64 to the Tx FIFO threshold. */ if (tp->tx_flag < 0x00300000) tp->tx_flag += 0x00020000; - tp->stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; } - tp->stats.collisions += (txstatus >> 24) & 15; - tp->stats.tx_bytes += txstatus & 0x7ff; - tp->stats.tx_packets++; + dev->stats.collisions += (txstatus >> 24) & 15; + dev->stats.tx_bytes += txstatus & 0x7ff; + dev->stats.tx_packets++; } dirty_tx++; @@ -1818,7 +1817,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, if (netif_msg_rx_err (tp)) printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n", dev->name, rx_status); - tp->stats.rx_errors++; + dev->stats.rx_errors++; if (!(rx_status & RxStatusOK)) { if (rx_status & RxTooLong) { DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n", @@ -1826,11 +1825,11 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, /* A.C.: The chip hangs here. */ } if (rx_status & (RxBadSymbol | RxBadAlign)) - tp->stats.rx_frame_errors++; + dev->stats.rx_frame_errors++; if (rx_status & (RxRunt | RxTooLong)) - tp->stats.rx_length_errors++; + dev->stats.rx_length_errors++; if (rx_status & RxCRCErr) - tp->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; } else { tp->xstats.rx_lost_in_ring++; } @@ -1913,9 +1912,9 @@ static void rtl8139_isr_ack(struct rtl8139_private *tp) /* Clear out errors and receive interrupts */ if (likely(status != 0)) { if (unlikely(status & (RxFIFOOver | RxOverflow))) { - tp->stats.rx_errors++; + tp->dev->stats.rx_errors++; if (status & RxFIFOOver) - tp->stats.rx_fifo_errors++; + tp->dev->stats.rx_fifo_errors++; } RTL_W16_F (IntrStatus, RxAckBits); } @@ -2016,8 +2015,8 @@ no_early_rx: skb->protocol = eth_type_trans (skb, dev); dev->last_rx = jiffies; - tp->stats.rx_bytes += pkt_size; - tp->stats.rx_packets++; + dev->stats.rx_bytes += pkt_size; + dev->stats.rx_packets++; netif_receive_skb (skb); } else { @@ -2025,7 +2024,7 @@ no_early_rx: printk (KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - tp->stats.rx_dropped++; + dev->stats.rx_dropped++; } received++; @@ -2072,7 +2071,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev, assert (ioaddr != NULL); /* Update the error count. */ - tp->stats.rx_missed_errors += RTL_R32 (RxMissed); + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); RTL_W32 (RxMissed, 0); if ((status & RxUnderrun) && link_changed && @@ -2082,12 +2081,12 @@ static void rtl8139_weird_interrupt (struct net_device *dev, } if (status & (RxUnderrun | RxErr)) - tp->stats.rx_errors++; + dev->stats.rx_errors++; if (status & PCSTimeout) - tp->stats.rx_length_errors++; + dev->stats.rx_length_errors++; if (status & RxUnderrun) - tp->stats.rx_fifo_errors++; + dev->stats.rx_fifo_errors++; if (status & PCIErr) { u16 pci_cmd_status; pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status); @@ -2227,7 +2226,7 @@ static int rtl8139_close (struct net_device *dev) RTL_W16 (IntrMask, 0); /* Update the error counts. */ - tp->stats.rx_missed_errors += RTL_R32 (RxMissed); + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); RTL_W32 (RxMissed, 0); spin_unlock_irqrestore (&tp->lock, flags); @@ -2472,12 +2471,12 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) if (netif_running(dev)) { spin_lock_irqsave (&tp->lock, flags); - tp->stats.rx_missed_errors += RTL_R32 (RxMissed); + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); RTL_W32 (RxMissed, 0); spin_unlock_irqrestore (&tp->lock, flags); } - return &tp->stats; + return &dev->stats; } /* Set or clear the multicast filter for this adaptor. @@ -2561,7 +2560,7 @@ static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state) RTL_W8 (ChipCmd, 0); /* Update the error counts. */ - tp->stats.rx_missed_errors += RTL_R32 (RxMissed); + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); RTL_W32 (RxMissed, 0); spin_unlock_irqrestore (&tp->lock, flags); diff --git a/drivers/net/8390.h b/drivers/net/8390.h index 04ddec0f4c6..cf020d45aea 100644 --- a/drivers/net/8390.h +++ b/drivers/net/8390.h @@ -69,7 +69,6 @@ struct ei_device { unsigned char reg0; /* Register '0' in a WD8013 */ unsigned char reg5; /* Register '5' in a WD8013 */ unsigned char saved_irq; /* Original dev->irq value. */ - struct net_device_stats stat; /* The new statistics table. */ u32 *reg_offset; /* Register mapping table */ spinlock_t page_lock; /* Page register locks */ unsigned long priv; /* Private field to store bus IDs etc. */ diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index 6c192650d34..e4483de84e7 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -1457,11 +1457,6 @@ static int __devinit ace_init(struct net_device *dev) ace_set_txprd(regs, ap, 0); writel(0, ®s->RxRetCsm); - /* - * Zero the stats before starting the interface - */ - memset(&ap->stats, 0, sizeof(ap->stats)); - /* * Enable DMA engine now. * If we do this sooner, Mckinley box pukes. @@ -2041,8 +2036,8 @@ static void ace_rx_int(struct net_device *dev, u32 rxretprd, u32 rxretcsm) netif_rx(skb); dev->last_rx = jiffies; - ap->stats.rx_packets++; - ap->stats.rx_bytes += retdesc->size; + dev->stats.rx_packets++; + dev->stats.rx_bytes += retdesc->size; idx = (idx + 1) % RX_RETURN_RING_ENTRIES; } @@ -2090,8 +2085,8 @@ static inline void ace_tx_int(struct net_device *dev, } if (skb) { - ap->stats.tx_packets++; - ap->stats.tx_bytes += skb->len; + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); info->skb = NULL; } @@ -2863,11 +2858,11 @@ static struct net_device_stats *ace_get_stats(struct net_device *dev) struct ace_mac_stats __iomem *mac_stats = (struct ace_mac_stats __iomem *)ap->regs->Stats; - ap->stats.rx_missed_errors = readl(&mac_stats->drop_space); - ap->stats.multicast = readl(&mac_stats->kept_mc); - ap->stats.collisions = readl(&mac_stats->coll); + dev->stats.rx_missed_errors = readl(&mac_stats->drop_space); + dev->stats.multicast = readl(&mac_stats->kept_mc); + dev->stats.collisions = readl(&mac_stats->coll); - return &ap->stats; + return &dev->stats; } diff --git a/drivers/net/acenic.h b/drivers/net/acenic.h index 60ed1837fa8..4487f32759a 100644 --- a/drivers/net/acenic.h +++ b/drivers/net/acenic.h @@ -693,7 +693,6 @@ struct ace_private __attribute__ ((aligned (SMP_CACHE_BYTES))); u32 last_tx, last_std_rx, last_mini_rx; #endif - struct net_device_stats stats; int pci_using_dac; }; diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 2b5740b3d18..ae07100bb93 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -708,7 +708,7 @@ static void cpmac_tx_timeout(struct net_device *dev) spin_unlock(&priv->lock); if (netif_msg_tx_err(priv) && net_ratelimit()) printk(KERN_WARNING "%s: transmit timeout\n", dev->name); - /* + /* * FIXME: waking up random queue is not the best thing to * do... on the other hand why we got here at all? */ diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index d45bcd2660a..32a9a922f15 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -718,7 +718,7 @@ dm9000_probe(struct platform_device *pdev) if (!is_valid_ether_addr(ndev->dev_addr)) { /* try reading from mac */ - + mac_src = "chip"; for (i = 0; i < 6; i++) ndev->dev_addr[i] = ior(db, i+DM9000_PAR); @@ -768,7 +768,7 @@ dm9000_open(struct net_device *dev) dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n"); irqflags = DEFAULT_TRIGGER; } - + irqflags |= IRQF_SHARED; if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev)) @@ -1115,7 +1115,7 @@ static int dm9000_wait_eeprom(board_info_t *db) /* The DM9000 data sheets say we should be able to * poll the ERRE bit in EPCR to wait for the EEPROM * operation. From testing several chips, this bit - * does not seem to work. + * does not seem to work. * * We attempt to use the bit, but fall back to the * timeout (which is why we do not return an error diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 25bdd0832df..393a0f17530 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -928,7 +928,7 @@ rx_irq_fail: tx_irq_fail: free_irq(priv->interruptError, dev); err_irq_fail: -err_rxalloc_fail: +err_rxalloc_fail: rx_skb_fail: free_skb_resources(priv); tx_skb_fail: diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 9d5721287d6..06ad9f302b5 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -99,9 +99,6 @@ struct sixpack { unsigned int rx_count; unsigned int rx_count_cooked; - /* 6pack interface statistics. */ - struct net_device_stats stats; - int mtu; /* Our mtu (to spot changes!) */ int buffsize; /* Max buffers sizes */ @@ -237,7 +234,7 @@ static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len) return; out_drop: - sp->stats.tx_dropped++; + sp->dev->stats.tx_dropped++; netif_start_queue(sp->dev); if (net_ratelimit()) printk(KERN_DEBUG "%s: %s - dropped.\n", sp->dev->name, msg); @@ -252,7 +249,7 @@ static int sp_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_bh(&sp->lock); /* We were not busy, so we are now... :-) */ netif_stop_queue(dev); - sp->stats.tx_bytes += skb->len; + dev->stats.tx_bytes += skb->len; sp_encaps(sp, skb->data, skb->len); spin_unlock_bh(&sp->lock); @@ -298,12 +295,6 @@ static int sp_header(struct sk_buff *skb, struct net_device *dev, return 0; } -static struct net_device_stats *sp_get_stats(struct net_device *dev) -{ - struct sixpack *sp = netdev_priv(dev); - return &sp->stats; -} - static int sp_set_mac_address(struct net_device *dev, void *addr) { struct sockaddr_ax25 *sa = addr; @@ -338,7 +329,6 @@ static void sp_setup(struct net_device *dev) dev->destructor = free_netdev; dev->stop = sp_close; - dev->get_stats = sp_get_stats; dev->set_mac_address = sp_set_mac_address; dev->hard_header_len = AX25_MAX_HEADER_LEN; dev->header_ops = &sp_header_ops; @@ -370,7 +360,7 @@ static void sp_bump(struct sixpack *sp, char cmd) count = sp->rcount + 1; - sp->stats.rx_bytes += count; + sp->dev->stats.rx_bytes += count; if ((skb = dev_alloc_skb(count)) == NULL) goto out_mem; @@ -382,12 +372,12 @@ static void sp_bump(struct sixpack *sp, char cmd) skb->protocol = ax25_type_trans(skb, sp->dev); netif_rx(skb); sp->dev->last_rx = jiffies; - sp->stats.rx_packets++; + sp->dev->stats.rx_packets++; return; out_mem: - sp->stats.rx_dropped++; + sp->dev->stats.rx_dropped++; } @@ -436,7 +426,7 @@ static void sixpack_write_wakeup(struct tty_struct *tty) if (sp->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ - sp->stats.tx_packets++; + sp->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); sp->tx_enable = 0; netif_wake_queue(sp->dev); @@ -484,7 +474,7 @@ static void sixpack_receive_buf(struct tty_struct *tty, count--; if (fp && *fp++) { if (!test_and_set_bit(SIXPF_ERROR, &sp->flags)) - sp->stats.rx_errors++; + sp->dev->stats.rx_errors++; continue; } } diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c index 0c5447dac03..ed495275b57 100644 --- a/drivers/net/lib8390.c +++ b/drivers/net/lib8390.c @@ -150,19 +150,19 @@ static void __NS8390_init(struct net_device *dev, int startp); * card means that approach caused horrible problems like losing serial data * at 38400 baud on some chips. Remember many 8390 nics on PCI were ISA * chips with FPGA front ends. - * + * * Ok the logic behind the 8390 is very simple: - * + * * Things to know * - IRQ delivery is asynchronous to the PCI bus * - Blocking the local CPU IRQ via spin locks was too slow * - The chip has register windows needing locking work - * + * * So the path was once (I say once as people appear to have changed it * in the mean time and it now looks rather bogus if the changes to use * disable_irq_nosync_irqsave are disabling the local IRQ) - * - * + * + * * Take the page lock * Mask the IRQ on chip * Disable the IRQ (but not mask locally- someone seems to have @@ -170,22 +170,22 @@ static void __NS8390_init(struct net_device *dev, int startp); * [This must be _nosync as the page lock may otherwise * deadlock us] * Drop the page lock and turn IRQs back on - * + * * At this point an existing IRQ may still be running but we can't * get a new one - * + * * Take the lock (so we know the IRQ has terminated) but don't mask * the IRQs on the processor * Set irqlock [for debug] - * + * * Transmit (slow as ****) - * + * * re-enable the IRQ - * - * + * + * * We have to use disable_irq because otherwise you will get delayed * interrupts on the APIC bus deadlocking the transmit path. - * + * * Quite hairy but the chip simply wasn't designed for SMP and you can't * even ACK an interrupt without risking corrupting other parallel * activities on the chip." [lkml, 25 Jul 2007] @@ -265,7 +265,7 @@ static void ei_tx_timeout(struct net_device *dev) int txsr, isr, tickssofar = jiffies - dev->trans_start; unsigned long flags; - ei_local->stat.tx_errors++; + dev->stats.tx_errors++; spin_lock_irqsave(&ei_local->page_lock, flags); txsr = ei_inb(e8390_base+EN0_TSR); @@ -276,7 +276,7 @@ static void ei_tx_timeout(struct net_device *dev) dev->name, (txsr & ENTSR_ABT) ? "excess collisions." : (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar); - if (!isr && !ei_local->stat.tx_packets) + if (!isr && !dev->stats.tx_packets) { /* The 8390 probably hasn't gotten on the cable yet. */ ei_local->interface_num ^= 1; /* Try a different xcvr. */ @@ -374,7 +374,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); spin_unlock(&ei_local->page_lock); enable_irq_lockdep_irqrestore(dev->irq, &flags); - ei_local->stat.tx_errors++; + dev->stats.tx_errors++; return 1; } @@ -417,7 +417,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) enable_irq_lockdep_irqrestore(dev->irq, &flags); dev_kfree_skb (skb); - ei_local->stat.tx_bytes += send_length; + dev->stats.tx_bytes += send_length; return 0; } @@ -493,9 +493,9 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) if (interrupts & ENISR_COUNTERS) { - ei_local->stat.rx_frame_errors += ei_inb_p(e8390_base + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += ei_inb_p(e8390_base + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= ei_inb_p(e8390_base + EN0_COUNTER2); + dev->stats.rx_frame_errors += ei_inb_p(e8390_base + EN0_COUNTER0); + dev->stats.rx_crc_errors += ei_inb_p(e8390_base + EN0_COUNTER1); + dev->stats.rx_missed_errors+= ei_inb_p(e8390_base + EN0_COUNTER2); ei_outb_p(ENISR_COUNTERS, e8390_base + EN0_ISR); /* Ack intr. */ } @@ -553,7 +553,6 @@ static void __ei_poll(struct net_device *dev) static void ei_tx_err(struct net_device *dev) { unsigned long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); unsigned char txsr = ei_inb_p(e8390_base+EN0_TSR); unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); @@ -578,10 +577,10 @@ static void ei_tx_err(struct net_device *dev) ei_tx_intr(dev); else { - ei_local->stat.tx_errors++; - if (txsr & ENTSR_CRS) ei_local->stat.tx_carrier_errors++; - if (txsr & ENTSR_CDH) ei_local->stat.tx_heartbeat_errors++; - if (txsr & ENTSR_OWC) ei_local->stat.tx_window_errors++; + dev->stats.tx_errors++; + if (txsr & ENTSR_CRS) dev->stats.tx_carrier_errors++; + if (txsr & ENTSR_CDH) dev->stats.tx_heartbeat_errors++; + if (txsr & ENTSR_OWC) dev->stats.tx_window_errors++; } } @@ -645,25 +644,25 @@ static void ei_tx_intr(struct net_device *dev) /* Minimize Tx latency: update the statistics after we restart TXing. */ if (status & ENTSR_COL) - ei_local->stat.collisions++; + dev->stats.collisions++; if (status & ENTSR_PTX) - ei_local->stat.tx_packets++; + dev->stats.tx_packets++; else { - ei_local->stat.tx_errors++; + dev->stats.tx_errors++; if (status & ENTSR_ABT) { - ei_local->stat.tx_aborted_errors++; - ei_local->stat.collisions += 16; + dev->stats.tx_aborted_errors++; + dev->stats.collisions += 16; } if (status & ENTSR_CRS) - ei_local->stat.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; if (status & ENTSR_FU) - ei_local->stat.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; if (status & ENTSR_CDH) - ei_local->stat.tx_heartbeat_errors++; + dev->stats.tx_heartbeat_errors++; if (status & ENTSR_OWC) - ei_local->stat.tx_window_errors++; + dev->stats.tx_window_errors++; } netif_wake_queue(dev); } @@ -730,7 +729,7 @@ static void ei_receive(struct net_device *dev) && rx_frame.next != next_frame + 1 - num_rx_pages) { ei_local->current_page = rxing_page; ei_outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY); - ei_local->stat.rx_errors++; + dev->stats.rx_errors++; continue; } @@ -740,8 +739,8 @@ static void ei_receive(struct net_device *dev) printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n", dev->name, rx_frame.count, rx_frame.status, rx_frame.next); - ei_local->stat.rx_errors++; - ei_local->stat.rx_length_errors++; + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; } else if ((pkt_stat & 0x0F) == ENRSR_RXOK) { @@ -753,7 +752,7 @@ static void ei_receive(struct net_device *dev) if (ei_debug > 1) printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); - ei_local->stat.rx_dropped++; + dev->stats.rx_dropped++; break; } else @@ -764,10 +763,10 @@ static void ei_receive(struct net_device *dev) skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); dev->last_rx = jiffies; - ei_local->stat.rx_packets++; - ei_local->stat.rx_bytes += pkt_len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; if (pkt_stat & ENRSR_PHY) - ei_local->stat.multicast++; + dev->stats.multicast++; } } else @@ -776,10 +775,10 @@ static void ei_receive(struct net_device *dev) printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n", dev->name, rx_frame.status, rx_frame.next, rx_frame.count); - ei_local->stat.rx_errors++; + dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) - ei_local->stat.rx_fifo_errors++; + dev->stats.rx_fifo_errors++; } next_frame = rx_frame.next; @@ -816,7 +815,6 @@ static void ei_rx_overrun(struct net_device *dev) { unsigned long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); /* * Record whether a Tx was in progress and then issue the @@ -827,7 +825,7 @@ static void ei_rx_overrun(struct net_device *dev) if (ei_debug > 1) printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name); - ei_local->stat.rx_over_errors++; + dev->stats.rx_over_errors++; /* * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. @@ -889,16 +887,16 @@ static struct net_device_stats *get_stats(struct net_device *dev) /* If the card is stopped, just return the present stats. */ if (!netif_running(dev)) - return &ei_local->stat; + return &dev->stats; spin_lock_irqsave(&ei_local->page_lock,flags); /* Read the counter registers, assuming we are in page 0. */ - ei_local->stat.rx_frame_errors += ei_inb_p(ioaddr + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += ei_inb_p(ioaddr + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= ei_inb_p(ioaddr + EN0_COUNTER2); + dev->stats.rx_frame_errors += ei_inb_p(ioaddr + EN0_COUNTER0); + dev->stats.rx_crc_errors += ei_inb_p(ioaddr + EN0_COUNTER1); + dev->stats.rx_missed_errors+= ei_inb_p(ioaddr + EN0_COUNTER2); spin_unlock_irqrestore(&ei_local->page_lock, flags); - return &ei_local->stat; + return &dev->stats; } /* diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 46119bb3770..b238ed0e8ac 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -664,7 +664,7 @@ static ssize_t natsemi_show_##_name(struct device *dev, \ NATSEMI_ATTR(dspcfg_workaround); static ssize_t natsemi_show_dspcfg_workaround(struct device *dev, - struct device_attribute *attr, + struct device_attribute *attr, char *buf) { struct netdev_private *np = netdev_priv(to_net_dev(dev)); @@ -687,7 +687,7 @@ static ssize_t natsemi_set_dspcfg_workaround(struct device *dev, || !strncmp("0", buf, count - 1)) new_setting = 0; else - return count; + return count; spin_lock_irqsave(&np->lock, flags); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index 12fd570b942..c6fa883daa2 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -281,7 +281,7 @@ #define XMAC_ADDR1 0x000a8UL #define XMAC_ADDR1_ADDR1 0x000000000000ffffULL -#define XMAC_ADDR2 0x000b0UL +#define XMAC_ADDR2 0x000b0UL #define XMAC_ADDR2_ADDR2 0x000000000000ffffULL #define XMAC_ADDR_CMPEN 0x00208UL diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 3b78a3819bb..7112fd5e0e1 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -208,7 +208,6 @@ enum Window4 { /* Window 4: Xcvr/media bits. */ struct el3_private { struct pcmcia_device *p_dev; dev_node_t node; - struct net_device_stats stats; u16 advertising, partner; /* NWay media advertisement */ unsigned char phys; /* MII device address */ unsigned int autoselect:1, default_media:3; /* Read from the EEPROM/Wn3_Config. */ @@ -741,12 +740,11 @@ static int el3_open(struct net_device *dev) static void el3_tx_timeout(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; printk(KERN_NOTICE "%s: Transmit timed out!\n", dev->name); dump_status(dev); - lp->stats.tx_errors++; + dev->stats.tx_errors++; dev->trans_start = jiffies; /* Issue TX_RESET and TX_START commands. */ tc574_wait_for_completion(dev, TxReset); @@ -756,7 +754,6 @@ static void el3_tx_timeout(struct net_device *dev) static void pop_tx_status(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; int i; @@ -772,7 +769,7 @@ static void pop_tx_status(struct net_device *dev) DEBUG(1, "%s: transmit error: status 0x%02x\n", dev->name, tx_status); outw(TxEnable, ioaddr + EL3_CMD); - lp->stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; } outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */ } @@ -987,7 +984,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev) update_stats(dev); spin_unlock_irqrestore(&lp->window_lock, flags); } - return &lp->stats; + return &dev->stats; } /* Update statistics. @@ -996,7 +993,6 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev) */ static void update_stats(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; u8 rx, tx, up; @@ -1008,15 +1004,15 @@ static void update_stats(struct net_device *dev) /* Unlike the 3c509 we need not turn off stats updates while reading. */ /* Switch to the stats window, and read everything. */ EL3WINDOW(6); - lp->stats.tx_carrier_errors += inb(ioaddr + 0); - lp->stats.tx_heartbeat_errors += inb(ioaddr + 1); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); /* Multiple collisions. */ inb(ioaddr + 2); - lp->stats.collisions += inb(ioaddr + 3); - lp->stats.tx_window_errors += inb(ioaddr + 4); - lp->stats.rx_fifo_errors += inb(ioaddr + 5); - lp->stats.tx_packets += inb(ioaddr + 6); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); up = inb(ioaddr + 9); - lp->stats.tx_packets += (up&0x30) << 4; + dev->stats.tx_packets += (up&0x30) << 4; /* Rx packets */ inb(ioaddr + 7); /* Tx deferrals */ inb(ioaddr + 8); rx = inw(ioaddr + 10); @@ -1026,14 +1022,13 @@ static void update_stats(struct net_device *dev) /* BadSSD */ inb(ioaddr + 12); up = inb(ioaddr + 13); - lp->stats.tx_bytes += tx + ((up & 0xf0) << 12); + dev->stats.tx_bytes += tx + ((up & 0xf0) << 12); EL3WINDOW(1); } static int el3_rx(struct net_device *dev, int worklimit) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; short rx_status; @@ -1043,14 +1038,14 @@ static int el3_rx(struct net_device *dev, int worklimit) (--worklimit >= 0)) { if (rx_status & 0x4000) { /* Error, update stats. */ short error = rx_status & 0x3800; - lp->stats.rx_errors++; + dev->stats.rx_errors++; switch (error) { - case 0x0000: lp->stats.rx_over_errors++; break; - case 0x0800: lp->stats.rx_length_errors++; break; - case 0x1000: lp->stats.rx_frame_errors++; break; - case 0x1800: lp->stats.rx_length_errors++; break; - case 0x2000: lp->stats.rx_frame_errors++; break; - case 0x2800: lp->stats.rx_crc_errors++; break; + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; } } else { short pkt_len = rx_status & 0x7ff; @@ -1067,12 +1062,12 @@ static int el3_rx(struct net_device *dev, int worklimit) skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); dev->last_rx = jiffies; - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; } else { DEBUG(1, "%s: couldn't allocate a sk_buff of" " size %d.\n", dev->name, pkt_len); - lp->stats.rx_dropped++; + dev->stats.rx_dropped++; } } tc574_wait_for_completion(dev, RxDiscard); diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 1b1abb19c91..549a6455842 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -107,7 +107,6 @@ enum RxFilter { struct el3_private { struct pcmcia_device *p_dev; dev_node_t node; - struct net_device_stats stats; /* For transceiver monitoring */ struct timer_list media; u16 media_status; @@ -566,12 +565,11 @@ static int el3_open(struct net_device *dev) static void el3_tx_timeout(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; printk(KERN_WARNING "%s: Transmit timed out!\n", dev->name); dump_status(dev); - lp->stats.tx_errors++; + dev->stats.tx_errors++; dev->trans_start = jiffies; /* Issue TX_RESET and TX_START commands. */ tc589_wait_for_completion(dev, TxReset); @@ -581,7 +579,6 @@ static void el3_tx_timeout(struct net_device *dev) static void pop_tx_status(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; int i; @@ -596,7 +593,7 @@ static void pop_tx_status(struct net_device *dev) DEBUG(1, "%s: transmit error: status 0x%02x\n", dev->name, tx_status); outw(TxEnable, ioaddr + EL3_CMD); - lp->stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; } outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ } @@ -614,7 +611,7 @@ static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&priv->lock, flags); - priv->stats.tx_bytes += skb->len; + dev->stats.tx_bytes += skb->len; /* Put out the doubleword header... */ outw(skb->len, ioaddr + TX_FIFO); @@ -764,7 +761,7 @@ static void media_check(unsigned long arg) outw(StatsDisable, ioaddr + EL3_CMD); errs = inb(ioaddr + 0); outw(StatsEnable, ioaddr + EL3_CMD); - lp->stats.tx_carrier_errors += errs; + dev->stats.tx_carrier_errors += errs; if (errs || (lp->media_status & 0x0010)) media |= 0x0010; } @@ -814,7 +811,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev) update_stats(dev); spin_unlock_irqrestore(&lp->lock, flags); } - return &lp->stats; + return &dev->stats; } /* @@ -827,7 +824,6 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev) */ static void update_stats(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; DEBUG(2, "%s: updating the statistics.\n", dev->name); @@ -835,13 +831,13 @@ static void update_stats(struct net_device *dev) outw(StatsDisable, ioaddr + EL3_CMD); /* Switch to the stats window, and read everything. */ EL3WINDOW(6); - lp->stats.tx_carrier_errors += inb(ioaddr + 0); - lp->stats.tx_heartbeat_errors += inb(ioaddr + 1); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); /* Multiple collisions. */ inb(ioaddr + 2); - lp->stats.collisions += inb(ioaddr + 3); - lp->stats.tx_window_errors += inb(ioaddr + 4); - lp->stats.rx_fifo_errors += inb(ioaddr + 5); - lp->stats.tx_packets += inb(ioaddr + 6); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); /* Rx packets */ inb(ioaddr + 7); /* Tx deferrals */ inb(ioaddr + 8); /* Rx octets */ inw(ioaddr + 10); @@ -854,7 +850,6 @@ static void update_stats(struct net_device *dev) static int el3_rx(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; int worklimit = 32; short rx_status; @@ -865,14 +860,14 @@ static int el3_rx(struct net_device *dev) (--worklimit >= 0)) { if (rx_status & 0x4000) { /* Error, update stats. */ short error = rx_status & 0x3800; - lp->stats.rx_errors++; + dev->stats.rx_errors++; switch (error) { - case 0x0000: lp->stats.rx_over_errors++; break; - case 0x0800: lp->stats.rx_length_errors++; break; - case 0x1000: lp->stats.rx_frame_errors++; break; - case 0x1800: lp->stats.rx_length_errors++; break; - case 0x2000: lp->stats.rx_frame_errors++; break; - case 0x2800: lp->stats.rx_crc_errors++; break; + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; } } else { short pkt_len = rx_status & 0x7ff; @@ -889,12 +884,12 @@ static int el3_rx(struct net_device *dev) skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); dev->last_rx = jiffies; - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; } else { DEBUG(1, "%s: couldn't allocate a sk_buff of" " size %d.\n", dev->name, pkt_len); - lp->stats.rx_dropped++; + dev->stats.rx_dropped++; } } /* Pop the top of the Rx FIFO */ @@ -929,7 +924,7 @@ static int el3_close(struct net_device *dev) DEBUG(1, "%s: shutting down ethercard.\n", dev->name); if (pcmcia_dev_present(link)) { - /* Turn off statistics ASAP. We update lp->stats below. */ + /* Turn off statistics ASAP. We update dev->stats below. */ outw(StatsDisable, ioaddr + EL3_CMD); /* Disable the receiver and transmitter. */ diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index ce95c5d168f..d7018ff9e17 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1021,7 +1021,7 @@ static void ei_tx_timeout(struct net_device *dev) int txsr, isr, tickssofar = jiffies - dev->trans_start; unsigned long flags; - ei_local->stat.tx_errors++; + dev->stats.tx_errors++; spin_lock_irqsave(&ei_local->page_lock, flags); txsr = inb(e8390_base+EN0_TSR); @@ -1032,7 +1032,7 @@ static void ei_tx_timeout(struct net_device *dev) dev->name, (txsr & ENTSR_ABT) ? "excess collisions." : (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar); - if (!isr && !ei_local->stat.tx_packets) + if (!isr && !dev->stats.tx_packets) { /* The 8390 probably hasn't gotten on the cable yet. */ ei_local->interface_num ^= 1; /* Try a different xcvr. */ @@ -1122,7 +1122,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); spin_unlock_irqrestore(&ei_local->page_lock, flags); - ei_local->stat.tx_errors++; + dev->stats.tx_errors++; return 1; } @@ -1170,7 +1170,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&ei_local->page_lock, flags); dev_kfree_skb (skb); - ei_local->stat.tx_bytes += send_length; + dev->stats.tx_bytes += send_length; return 0; } @@ -1262,9 +1262,9 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) if (interrupts & ENISR_COUNTERS) { - ei_local->stat.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2); + dev->stats.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0); + dev->stats.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1); + dev->stats.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2); } } @@ -1309,7 +1309,6 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) static void ei_tx_err(struct net_device *dev) { long e8390_base = dev->base_addr; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); unsigned char txsr = inb_p(e8390_base+EN0_TSR); unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); @@ -1332,10 +1331,10 @@ static void ei_tx_err(struct net_device *dev) ei_tx_intr(dev); else { - ei_local->stat.tx_errors++; - if (txsr & ENTSR_CRS) ei_local->stat.tx_carrier_errors++; - if (txsr & ENTSR_CDH) ei_local->stat.tx_heartbeat_errors++; - if (txsr & ENTSR_OWC) ei_local->stat.tx_window_errors++; + dev->stats.tx_errors++; + if (txsr & ENTSR_CRS) dev->stats.tx_carrier_errors++; + if (txsr & ENTSR_CDH) dev->stats.tx_heartbeat_errors++; + if (txsr & ENTSR_OWC) dev->stats.tx_window_errors++; } } @@ -1397,25 +1396,25 @@ static void ei_tx_intr(struct net_device *dev) /* Minimize Tx latency: update the statistics after we restart TXing. */ if (status & ENTSR_COL) - ei_local->stat.collisions++; + dev->stats.collisions++; if (status & ENTSR_PTX) - ei_local->stat.tx_packets++; + dev->stats.tx_packets++; else { - ei_local->stat.tx_errors++; + dev->stats.tx_errors++; if (status & ENTSR_ABT) { - ei_local->stat.tx_aborted_errors++; - ei_local->stat.collisions += 16; + dev->stats.tx_aborted_errors++; + dev->stats.collisions += 16; } if (status & ENTSR_CRS) - ei_local->stat.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; if (status & ENTSR_FU) - ei_local->stat.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; if (status & ENTSR_CDH) - ei_local->stat.tx_heartbeat_errors++; + dev->stats.tx_heartbeat_errors++; if (status & ENTSR_OWC) - ei_local->stat.tx_window_errors++; + dev->stats.tx_window_errors++; } netif_wake_queue(dev); } @@ -1476,8 +1475,8 @@ static void ei_receive(struct net_device *dev) printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n", dev->name, rx_frame.count, rx_frame.status, rx_frame.next); - ei_local->stat.rx_errors++; - ei_local->stat.rx_length_errors++; + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; } else if ((pkt_stat & 0x0F) == ENRSR_RXOK) { @@ -1489,7 +1488,7 @@ static void ei_receive(struct net_device *dev) if (ei_debug > 1) printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); - ei_local->stat.rx_dropped++; + dev->stats.rx_dropped++; break; } else @@ -1500,10 +1499,10 @@ static void ei_receive(struct net_device *dev) skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); dev->last_rx = jiffies; - ei_local->stat.rx_packets++; - ei_local->stat.rx_bytes += pkt_len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; if (pkt_stat & ENRSR_PHY) - ei_local->stat.multicast++; + dev->stats.multicast++; } } else @@ -1512,10 +1511,10 @@ static void ei_receive(struct net_device *dev) printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n", dev->name, rx_frame.status, rx_frame.next, rx_frame.count); - ei_local->stat.rx_errors++; + dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) - ei_local->stat.rx_fifo_errors++; + dev->stats.rx_fifo_errors++; } next_frame = rx_frame.next; @@ -1550,7 +1549,6 @@ static void ei_rx_overrun(struct net_device *dev) axnet_dev_t *info = PRIV(dev); long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; - struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev); /* * Record whether a Tx was in progress and then issue the @@ -1561,7 +1559,7 @@ static void ei_rx_overrun(struct net_device *dev) if (ei_debug > 1) printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name); - ei_local->stat.rx_over_errors++; + dev->stats.rx_over_errors++; /* * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. @@ -1622,16 +1620,16 @@ static struct net_device_stats *get_stats(struct net_device *dev) /* If the card is stopped, just return the present stats. */ if (!netif_running(dev)) - return &ei_local->stat; + return &dev->stats; spin_lock_irqsave(&ei_local->page_lock,flags); /* Read the counter registers, assuming we are in page 0. */ - ei_local->stat.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0); - ei_local->stat.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1); - ei_local->stat.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2); + dev->stats.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0); + dev->stats.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1); + dev->stats.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2); spin_unlock_irqrestore(&ei_local->page_lock, flags); - return &ei_local->stat; + return &dev->stats; } /* diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index a1c454dbc16..81fd85214b9 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -1973,7 +1973,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) err_free_ring: pcnet32_free_ring(dev); err_free_consistent: - pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), + pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), lp->init_block, lp->init_dma_addr); err_free_netdev: free_netdev(dev); @@ -2953,7 +2953,7 @@ static void __devexit pcnet32_remove_one(struct pci_dev *pdev) unregister_netdev(dev); pcnet32_free_ring(dev); release_region(dev->base_addr, PCNET32_TOTAL_SIZE); - pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), + pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), lp->init_block, lp->init_dma_addr); free_netdev(dev); pci_disable_device(pdev); @@ -3036,7 +3036,7 @@ static void __exit pcnet32_cleanup_module(void) unregister_netdev(pcnet32_dev); pcnet32_free_ring(pcnet32_dev); release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE); - pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), + pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block), lp->init_block, lp->init_dma_addr); free_netdev(pcnet32_dev); pcnet32_dev = next_dev; diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index b7f7b2227d5..5f608780c3e 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1437,9 +1437,9 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev) reg &= ~PHY_GIG_ALL_PARAMS; if(portConfiguration & PORT_CONFIG_1000MB_SPEED) { - if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) + if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) reg |= PHY_GIG_ADV_1000F; - else + else reg |= PHY_GIG_ADV_1000H; } diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 523478ebfd6..75bde647583 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2547,7 +2547,7 @@ static int fill_rx_buffers(struct ring_info *ring) if (block_no) rxd_index += (block_no * ring->rxd_count); - if ((block_no == block_no1) && + if ((block_no == block_no1) && (off == ring->rx_curr_get_info.offset) && (rxdp->Host_Control)) { DBG_PRINT(INTR_DBG, "%s: Get and Put", @@ -2593,7 +2593,7 @@ static int fill_rx_buffers(struct ring_info *ring) first_rxdp->Control_1 |= RXD_OWN_XENA; } stats->mem_alloc_fail_cnt++; - + return -ENOMEM ; } stats->mem_allocated += skb->truesize; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 0709ebae913..58229dcbf5e 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -747,7 +747,7 @@ struct ring_info { /* interface MTU value */ unsigned mtu; - + /* Buffer Address store. */ struct buffAdd **ba; diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 888b7dec986..29519902517 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -1063,7 +1063,7 @@ static void sbmac_netpoll(struct net_device *netdev) ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), sc->sbm_imr); #else - __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | + __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); #endif } diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index abc63b0663b..3fe01763760 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1656,7 +1656,7 @@ static inline void sis190_init_rxfilter(struct net_device *dev) SIS_PCI_COMMIT(); } -static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, +static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) { int rc; diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index ec95e493ac1..fa3a460f8e2 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1766,7 +1766,7 @@ static int sis900_rx(struct net_device *net_dev) skb = sis_priv->rx_skbuff[entry]; net_dev->stats.rx_dropped++; goto refill_rx_ring; - } + } /* This situation should never happen, but due to some unknow bugs, it is possible that diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f226bcac7d1..4b0f0335877 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3369,7 +3369,7 @@ static void sky2_led(struct sky2_port *sky2, enum led_mode mode) gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); } else - gm_phy_write(hw, port, PHY_MARV_LED_OVER, + gm_phy_write(hw, port, PHY_MARV_LED_OVER, PHY_M_LED_MO_DUP(mode) | PHY_M_LED_MO_10(mode) | PHY_M_LED_MO_100(mode) | diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 47767160627..00aa0b108cb 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1704,7 +1704,7 @@ spider_net_poll_controller(struct net_device *netdev) * * spider_net_enable_interrupt enables several interrupts */ -static void +static void spider_net_enable_interrupts(struct spider_net_card *card) { spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, @@ -1721,7 +1721,7 @@ spider_net_enable_interrupts(struct spider_net_card *card) * * spider_net_disable_interrupts disables all the interrupts */ -static void +static void spider_net_disable_interrupts(struct spider_net_card *card) { spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0); diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index 45208a0e69a..7766cde0d63 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -132,7 +132,6 @@ static void xl_dn_comp(struct net_device *dev); static int xl_close(struct net_device *dev); static void xl_set_rx_mode(struct net_device *dev); static irqreturn_t xl_interrupt(int irq, void *dev_id); -static struct net_device_stats * xl_get_stats(struct net_device *dev); static int xl_set_mac_address(struct net_device *dev, void *addr) ; static void xl_arb_cmd(struct net_device *dev); static void xl_asb_cmd(struct net_device *dev) ; @@ -343,7 +342,6 @@ static int __devinit xl_probe(struct pci_dev *pdev, dev->stop=&xl_close; dev->do_ioctl=NULL; dev->set_multicast_list=&xl_set_rx_mode; - dev->get_stats=&xl_get_stats ; dev->set_mac_address=&xl_set_mac_address ; SET_NETDEV_DEV(dev, &pdev->dev); @@ -921,7 +919,7 @@ static void xl_rx(struct net_device *dev) adv_rx_ring(dev) ; adv_rx_ring(dev) ; /* One more time just for luck :) */ - xl_priv->xl_stats.rx_dropped++ ; + dev->stats.rx_dropped++ ; writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; return ; @@ -957,7 +955,7 @@ static void xl_rx(struct net_device *dev) if (skb==NULL) { /* Still need to fix the rx ring */ printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer \n",dev->name) ; adv_rx_ring(dev) ; - xl_priv->xl_stats.rx_dropped++ ; + dev->stats.rx_dropped++ ; writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; return ; } @@ -971,8 +969,8 @@ static void xl_rx(struct net_device *dev) xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG; adv_rx_ring(dev) ; - xl_priv->xl_stats.rx_packets++ ; - xl_priv->xl_stats.rx_bytes += frame_length ; + dev->stats.rx_packets++ ; + dev->stats.rx_bytes += frame_length ; netif_rx(skb2) ; } /* if multiple buffers */ @@ -1182,8 +1180,8 @@ static int xl_xmit(struct sk_buff *skb, struct net_device *dev) txd->buffer = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); txd->buffer_length = cpu_to_le32(skb->len) | TXDNFRAGLAST; xl_priv->tx_ring_skb[tx_head] = skb ; - xl_priv->xl_stats.tx_packets++ ; - xl_priv->xl_stats.tx_bytes += skb->len ; + dev->stats.tx_packets++ ; + dev->stats.tx_bytes += skb->len ; /* * Set the nextptr of the previous descriptor equal to this descriptor, add XL_TX_RING_SIZE -1 @@ -1463,12 +1461,6 @@ static void xl_srb_bh(struct net_device *dev) return ; } -static struct net_device_stats * xl_get_stats(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - return (struct net_device_stats *) &xl_priv->xl_stats; -} - static int xl_set_mac_address (struct net_device *dev, void *addr) { struct sockaddr *saddr = addr ; diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h index b880cba0f6f..0f8b4ec8695 100644 --- a/drivers/net/tokenring/3c359.h +++ b/drivers/net/tokenring/3c359.h @@ -273,8 +273,6 @@ struct xl_private { struct wait_queue *srb_wait; volatile int asb_queued; - struct net_device_stats xl_stats ; - u16 mac_buffer ; u16 xl_lan_status ; u8 xl_ring_speed ; diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 6017d5267d0..c028facd934 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1526,7 +1526,7 @@ static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) struct tsi108_prv_data *data = netdev_priv(dev); unsigned long flags; int rc; - + spin_lock_irqsave(&data->txlock, flags); rc = mii_ethtool_gset(&data->mii_if, cmd); spin_unlock_irqrestore(&data->txlock, flags); @@ -1543,7 +1543,7 @@ static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) spin_lock_irqsave(&data->txlock, flags); rc = mii_ethtool_sset(&data->mii_if, cmd); spin_unlock_irqrestore(&data->txlock, flags); - + return rc; } diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 299b7f17695..5f176f2b1c1 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -5,7 +5,7 @@ * * Author: Li Yang <leoli@freescale.com> * - * Limitation: + * Limitation: * Can only get/set setttings of the first queue. * Need to re-open the interface manually after changing some paramters. * @@ -159,7 +159,7 @@ uec_set_pauseparam(struct net_device *netdev, ugeth->ug_info->receiveFlowControl = pause->rx_pause; ugeth->ug_info->transmitFlowControl = pause->tx_pause; - + if (ugeth->phydev->autoneg) { if (netif_running(netdev)) { /* FIXME: automatically restart */ diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 5c0d2b08275..d93a1de77eb 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -306,11 +306,10 @@ static int adm8211_get_tx_stats(struct ieee80211_hw *dev, struct ieee80211_tx_queue_stats *stats) { struct adm8211_priv *priv = dev->priv; - struct ieee80211_tx_queue_stats_data *data = &stats->data[0]; - data->len = priv->cur_tx - priv->dirty_tx; - data->limit = priv->tx_ring_size - 2; - data->count = priv->dirty_tx; + stats[0].len = priv->cur_tx - priv->dirty_tx; + stats[0].limit = priv->tx_ring_size - 2; + stats[0].count = priv->dirty_tx; return 0; } diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 4e5c8fc3520..3201c160434 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1319,7 +1319,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, pktlen = skb->len; if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) { - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx; pktlen += ctl->icv_len; } @@ -1335,7 +1335,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, spin_lock_bh(&txq->lock); list_add_tail(&bf->list, &txq->q); - sc->tx_stats.data[txq->qnum].len++; + sc->tx_stats[txq->qnum].len++; if (txq->link == NULL) /* is this first packet? */ ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr); else /* no, so only link it */ @@ -1566,7 +1566,7 @@ ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) ath5k_txbuf_free(sc, bf); spin_lock_bh(&sc->txbuflock); - sc->tx_stats.data[txq->qnum].len--; + sc->tx_stats[txq->qnum].len--; list_move_tail(&bf->list, &sc->txbuf); sc->txbuf_len++; spin_unlock_bh(&sc->txbuflock); @@ -1979,10 +1979,10 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) } ieee80211_tx_status(sc->hw, skb, &txs); - sc->tx_stats.data[txq->qnum].count++; + sc->tx_stats[txq->qnum].count++; spin_lock(&sc->txbuflock); - sc->tx_stats.data[txq->qnum].len--; + sc->tx_stats[txq->qnum].len--; list_move_tail(&bf->list, &sc->txbuf); sc->txbuf_len++; spin_unlock(&sc->txbuflock); diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 3a975589301..ecb17495488 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -92,7 +92,8 @@ struct ath5k_softc { struct pci_dev *pdev; /* for dma mapping */ void __iomem *iobase; /* address of the device */ struct mutex lock; /* dev-level lock */ - struct ieee80211_tx_queue_stats tx_stats; + /* FIXME: how many does it really need? */ + struct ieee80211_tx_queue_stats tx_stats[16]; struct ieee80211_low_level_stats ll_stats; struct ieee80211_hw *hw; /* IEEE 802.11 common */ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 37783cdd301..7d034df250b 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -410,8 +410,7 @@ enum { #define B43_IRQ_TIMEOUT 0x80000000 #define B43_IRQ_ALL 0xFFFFFFFF -#define B43_IRQ_MASKTEMPLATE (B43_IRQ_MAC_SUSPENDED | \ - B43_IRQ_TBTT_INDI | \ +#define B43_IRQ_MASKTEMPLATE (B43_IRQ_TBTT_INDI | \ B43_IRQ_ATIM_END | \ B43_IRQ_PMQ | \ B43_IRQ_MAC_TXERR | \ diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 7fca2ebc747..210e2789c1c 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -270,24 +270,22 @@ static int restart_write_file(struct b43_wldev *dev, return err; } -static ssize_t append_lo_table(ssize_t count, char *buf, const size_t bufsize, - struct b43_loctl table[B43_NR_BB][B43_NR_RF]) +static unsigned long calc_expire_secs(unsigned long now, + unsigned long time, + unsigned long expire) { - unsigned int i, j; - struct b43_loctl *ctl; - - for (i = 0; i < B43_NR_BB; i++) { - for (j = 0; j < B43_NR_RF; j++) { - ctl = &(table[i][j]); - fappend("(bbatt %2u, rfatt %2u) -> " - "(I %+3d, Q %+3d, Used: %d, Calibrated: %d)\n", - i, j, ctl->i, ctl->q, - ctl->used, - b43_loctl_is_calibrated(ctl)); - } + expire = time + expire; + + if (time_after(now, expire)) + return 0; /* expired */ + if (expire < now) { + /* jiffies wrapped */ + expire -= MAX_JIFFY_OFFSET; + now -= MAX_JIFFY_OFFSET; } + B43_WARN_ON(expire < now); - return count; + return (expire - now) / HZ; } static ssize_t loctls_read_file(struct b43_wldev *dev, @@ -296,27 +294,45 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, ssize_t count = 0; struct b43_txpower_lo_control *lo; int i, err = 0; + struct b43_lo_calib *cal; + unsigned long now = jiffies; + struct b43_phy *phy = &dev->phy; - if (dev->phy.type != B43_PHYTYPE_G) { + if (phy->type != B43_PHYTYPE_G) { fappend("Device is not a G-PHY\n"); err = -ENODEV; goto out; } - lo = dev->phy.lo_control; + lo = phy->lo_control; fappend("-- Local Oscillator calibration data --\n\n"); - fappend("Measured: %d, Rebuild: %d, HW-power-control: %d\n", - lo->lo_measured, - lo->rebuild, + fappend("HW-power-control enabled: %d\n", dev->phy.hardware_power_control); - fappend("TX Bias: 0x%02X, TX Magn: 0x%02X\n", - lo->tx_bias, lo->tx_magn); - fappend("Power Vector: 0x%08X%08X\n", + fappend("TX Bias: 0x%02X, TX Magn: 0x%02X (expire in %lu sec)\n", + lo->tx_bias, lo->tx_magn, + calc_expire_secs(now, lo->txctl_measured_time, + B43_LO_TXCTL_EXPIRE)); + fappend("Power Vector: 0x%08X%08X (expires in %lu sec)\n", (unsigned int)((lo->power_vector & 0xFFFFFFFF00000000ULL) >> 32), - (unsigned int)(lo->power_vector & 0x00000000FFFFFFFFULL)); - fappend("\nControl table WITH PADMIX:\n"); - count = append_lo_table(count, buf, bufsize, lo->with_padmix); - fappend("\nControl table WITHOUT PADMIX:\n"); - count = append_lo_table(count, buf, bufsize, lo->no_padmix); + (unsigned int)(lo->power_vector & 0x00000000FFFFFFFFULL), + calc_expire_secs(now, lo->pwr_vec_read_time, + B43_LO_PWRVEC_EXPIRE)); + + fappend("\nCalibrated settings:\n"); + list_for_each_entry(cal, &lo->calib_list, list) { + bool active; + + active = (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && + b43_compare_rfatt(&cal->rfatt, &phy->rfatt)); + fappend("BB(%d), RF(%d,%d) -> I=%d, Q=%d " + "(expires in %lu sec)%s\n", + cal->bbatt.att, + cal->rfatt.att, cal->rfatt.with_padmix, + cal->ctl.i, cal->ctl.q, + calc_expire_secs(now, cal->calib_time, + B43_LO_CALIB_EXPIRE), + active ? " ACTIVE" : ""); + } + fappend("\nUsed RF attenuation values: Value(WithPadmix flag)\n"); for (i = 0; i < lo->rfatt_list.len; i++) { fappend("%u(%d), ", @@ -351,7 +367,7 @@ static ssize_t b43_debugfs_read(struct file *file, char __user *userbuf, struct b43_dfs_file *dfile; ssize_t uninitialized_var(ret); char *buf; - const size_t bufsize = 1024 * 128; + const size_t bufsize = 1024 * 16; /* 16 kiB buffer */ const size_t buforder = get_order(bufsize); int err = 0; @@ -380,8 +396,6 @@ static ssize_t b43_debugfs_read(struct file *file, char __user *userbuf, err = -ENOMEM; goto out_unlock; } - /* Sparse warns about the following memset, because it has a big - * size value. That warning is bogus, so I will ignore it. --mb */ memset(buf, 0, bufsize); if (dfops->take_irqlock) { spin_lock_irq(&dev->wl->irq_lock); @@ -523,6 +537,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev) add_dyn_dbg("debug_dmaverbose", B43_DBG_DMAVERBOSE, 0); add_dyn_dbg("debug_pwork_fast", B43_DBG_PWORK_FAST, 0); add_dyn_dbg("debug_pwork_stop", B43_DBG_PWORK_STOP, 0); + add_dyn_dbg("debug_lo", B43_DBG_LO, 0); #undef add_dyn_dbg } diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index 6eebe858db5..c75cff4151d 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -10,6 +10,7 @@ enum b43_dyndbg { /* Dynamic debugging features */ B43_DBG_DMAVERBOSE, B43_DBG_PWORK_FAST, B43_DBG_PWORK_STOP, + B43_DBG_LO, __B43_NR_DYNDBG, }; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 6dcbb3c87e7..f50e2014ffb 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1427,18 +1427,16 @@ void b43_dma_get_tx_stats(struct b43_wldev *dev, { const int nr_queues = dev->wl->hw->queues; struct b43_dmaring *ring; - struct ieee80211_tx_queue_stats_data *data; unsigned long flags; int i; for (i = 0; i < nr_queues; i++) { - data = &(stats->data[i]); ring = select_ring_by_priority(dev, i); spin_lock_irqsave(&ring->lock, flags); - data->len = ring->used_slots / SLOTS_PER_PACKET; - data->limit = ring->nr_slots / SLOTS_PER_PACKET; - data->count = ring->nr_tx_packets; + stats[i].len = ring->used_slots / SLOTS_PER_PACKET; + stats[i].limit = ring->nr_slots / SLOTS_PER_PACKET; + stats[i].count = ring->nr_tx_packets; spin_unlock_irqrestore(&ring->lock, flags); } } diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c index d890f366a23..4ce1e356120 100644 --- a/drivers/net/wireless/b43/lo.c +++ b/drivers/net/wireless/b43/lo.c @@ -36,17 +36,28 @@ #include <linux/sched.h> -/* Define to 1 to always calibrate all possible LO control pairs. - * This is a workaround until we fix the partial LO calibration optimization. */ -#define B43_CALIB_ALL_LOCTLS 1 +static struct b43_lo_calib * b43_find_lo_calib(struct b43_txpower_lo_control *lo, + const struct b43_bbatt *bbatt, + const struct b43_rfatt *rfatt) +{ + struct b43_lo_calib *c; + + list_for_each_entry(c, &lo->calib_list, list) { + if (!b43_compare_bbatt(&c->bbatt, bbatt)) + continue; + if (!b43_compare_rfatt(&c->rfatt, rfatt)) + continue; + return c; + } + return NULL; +} /* Write the LocalOscillator Control (adjust) value-pair. */ static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control) { struct b43_phy *phy = &dev->phy; u16 value; - u16 reg; if (B43_DEBUG) { if (unlikely(abs(control->i) > 16 || abs(control->q) > 16)) { @@ -56,189 +67,11 @@ static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control) return; } } + B43_WARN_ON(phy->type != B43_PHYTYPE_G); value = (u8) (control->q); value |= ((u8) (control->i)) << 8; - - reg = (phy->type == B43_PHYTYPE_B) ? 0x002F : B43_PHY_LO_CTL; - b43_phy_write(dev, reg, value); -} - -static int assert_rfatt_and_bbatt(const struct b43_rfatt *rfatt, - const struct b43_bbatt *bbatt, - struct b43_wldev *dev) -{ - int err = 0; - - /* Check the attenuation values against the LO control array sizes. */ - if (unlikely(rfatt->att >= B43_NR_RF)) { - b43err(dev->wl, "rfatt(%u) >= size of LO array\n", rfatt->att); - err = -EINVAL; - } - if (unlikely(bbatt->att >= B43_NR_BB)) { - b43err(dev->wl, "bbatt(%u) >= size of LO array\n", bbatt->att); - err = -EINVAL; - } - - return err; -} - -#if !B43_CALIB_ALL_LOCTLS -static -struct b43_loctl *b43_get_lo_g_ctl_nopadmix(struct b43_wldev *dev, - const struct b43_rfatt *rfatt, - const struct b43_bbatt *bbatt) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; - - if (assert_rfatt_and_bbatt(rfatt, bbatt, dev)) - return &(lo->no_padmix[0][0]); /* Just prevent a crash */ - return &(lo->no_padmix[bbatt->att][rfatt->att]); -} -#endif /* !B43_CALIB_ALL_LOCTLS */ - -struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev, - const struct b43_rfatt *rfatt, - const struct b43_bbatt *bbatt) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; - - if (assert_rfatt_and_bbatt(rfatt, bbatt, dev)) - return &(lo->no_padmix[0][0]); /* Just prevent a crash */ - if (rfatt->with_padmix) - return &(lo->with_padmix[bbatt->att][rfatt->att]); - return &(lo->no_padmix[bbatt->att][rfatt->att]); -} - -/* Call a function for every possible LO control value-pair. */ -static void b43_call_for_each_loctl(struct b43_wldev *dev, - void (*func) (struct b43_wldev *, - struct b43_loctl *)) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *ctl = phy->lo_control; - int i, j; - - for (i = 0; i < B43_NR_BB; i++) { - for (j = 0; j < B43_NR_RF; j++) - func(dev, &(ctl->with_padmix[i][j])); - } - for (i = 0; i < B43_NR_BB; i++) { - for (j = 0; j < B43_NR_RF; j++) - func(dev, &(ctl->no_padmix[i][j])); - } -} - -static u16 lo_b_r15_loop(struct b43_wldev *dev) -{ - int i; - u16 ret = 0; - - for (i = 0; i < 10; i++) { - b43_phy_write(dev, 0x0015, 0xAFA0); - udelay(1); - b43_phy_write(dev, 0x0015, 0xEFA0); - udelay(10); - b43_phy_write(dev, 0x0015, 0xFFA0); - udelay(40); - ret += b43_phy_read(dev, 0x002C); - } - - return ret; -} - -void b43_lo_b_measure(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 regstack[12] = { 0 }; - u16 mls; - u16 fval; - int i, j; - - regstack[0] = b43_phy_read(dev, 0x0015); - regstack[1] = b43_radio_read16(dev, 0x0052) & 0xFFF0; - - if (phy->radio_ver == 0x2053) { - regstack[2] = b43_phy_read(dev, 0x000A); - regstack[3] = b43_phy_read(dev, 0x002A); - regstack[4] = b43_phy_read(dev, 0x0035); - regstack[5] = b43_phy_read(dev, 0x0003); - regstack[6] = b43_phy_read(dev, 0x0001); - regstack[7] = b43_phy_read(dev, 0x0030); - - regstack[8] = b43_radio_read16(dev, 0x0043); - regstack[9] = b43_radio_read16(dev, 0x007A); - regstack[10] = b43_read16(dev, 0x03EC); - regstack[11] = b43_radio_read16(dev, 0x0052) & 0x00F0; - - b43_phy_write(dev, 0x0030, 0x00FF); - b43_write16(dev, 0x03EC, 0x3F3F); - b43_phy_write(dev, 0x0035, regstack[4] & 0xFF7F); - b43_radio_write16(dev, 0x007A, regstack[9] & 0xFFF0); - } - b43_phy_write(dev, 0x0015, 0xB000); - b43_phy_write(dev, 0x002B, 0x0004); - - if (phy->radio_ver == 0x2053) { - b43_phy_write(dev, 0x002B, 0x0203); - b43_phy_write(dev, 0x002A, 0x08A3); - } - - phy->minlowsig[0] = 0xFFFF; - - for (i = 0; i < 4; i++) { - b43_radio_write16(dev, 0x0052, regstack[1] | i); - lo_b_r15_loop(dev); - } - for (i = 0; i < 10; i++) { - b43_radio_write16(dev, 0x0052, regstack[1] | i); - mls = lo_b_r15_loop(dev) / 10; - if (mls < phy->minlowsig[0]) { - phy->minlowsig[0] = mls; - phy->minlowsigpos[0] = i; - } - } - b43_radio_write16(dev, 0x0052, regstack[1] | phy->minlowsigpos[0]); - - phy->minlowsig[1] = 0xFFFF; - - for (i = -4; i < 5; i += 2) { - for (j = -4; j < 5; j += 2) { - if (j < 0) - fval = (0x0100 * i) + j + 0x0100; - else - fval = (0x0100 * i) + j; - b43_phy_write(dev, 0x002F, fval); - mls = lo_b_r15_loop(dev) / 10; - if (mls < phy->minlowsig[1]) { - phy->minlowsig[1] = mls; - phy->minlowsigpos[1] = fval; - } - } - } - phy->minlowsigpos[1] += 0x0101; - - b43_phy_write(dev, 0x002F, phy->minlowsigpos[1]); - if (phy->radio_ver == 0x2053) { - b43_phy_write(dev, 0x000A, regstack[2]); - b43_phy_write(dev, 0x002A, regstack[3]); - b43_phy_write(dev, 0x0035, regstack[4]); - b43_phy_write(dev, 0x0003, regstack[5]); - b43_phy_write(dev, 0x0001, regstack[6]); - b43_phy_write(dev, 0x0030, regstack[7]); - - b43_radio_write16(dev, 0x0043, regstack[8]); - b43_radio_write16(dev, 0x007A, regstack[9]); - - b43_radio_write16(dev, 0x0052, - (b43_radio_read16(dev, 0x0052) & 0x000F) - | regstack[11]); - - b43_write16(dev, 0x03EC, regstack[10]); - } - b43_phy_write(dev, 0x0015, regstack[0]); + b43_phy_write(dev, B43_PHY_LO_CTL, value); } static u16 lo_measure_feedthrough(struct b43_wldev *dev, @@ -438,48 +271,26 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) b43_radio_write16(dev, 0x52, b43_radio_read16(dev, 0x52) & 0xFFF0); /* TX bias == 0 */ } + lo->txctl_measured_time = jiffies; } static void lo_read_power_vector(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; struct b43_txpower_lo_control *lo = phy->lo_control; - u16 i; + int i; u64 tmp; u64 power_vector = 0; - int rf_offset, bb_offset; - struct b43_loctl *loctl; for (i = 0; i < 8; i += 2) { tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x310 + i); - /* Clear the top byte. We get holes in the bitmap... */ - tmp &= 0xFF; power_vector |= (tmp << (i * 8)); /* Clear the vector on the device. */ b43_shm_write16(dev, B43_SHM_SHARED, 0x310 + i, 0); } - if (power_vector) lo->power_vector = power_vector; - power_vector = lo->power_vector; - - for (i = 0; i < 64; i++) { - if (power_vector & ((u64) 1ULL << i)) { - /* Now figure out which b43_loctl corresponds - * to this bit. - */ - rf_offset = i / lo->rfatt_list.len; - bb_offset = i % lo->rfatt_list.len; //FIXME? - loctl = - b43_get_lo_g_ctl(dev, - &lo->rfatt_list.list[rf_offset], - &lo->bbatt_list.list[bb_offset]); - /* And mark it as "used", as the device told us - * through the bitmap it is using it. - */ - loctl->used = 1; - } - } + lo->pwr_vec_read_time = jiffies; } /* 802.11/LO/GPHY/MeasuringGains */ @@ -609,8 +420,6 @@ static void lo_measure_setup(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x16), 0x410); b43_phy_write(dev, B43_PHY_CCK(0x17), 0x820); } - if (!lo->rebuild && b43_has_hardware_pctl(phy)) - lo_read_power_vector(dev); if (phy->rev >= 2) { sav->phy_analogover = b43_phy_read(dev, B43_PHY_ANALOGOVER); sav->phy_analogoverval = @@ -691,8 +500,12 @@ static void lo_measure_setup(struct b43_wldev *dev, b43_radio_read16(dev, 0x51); /* dummy read */ if (phy->type == B43_PHYTYPE_G) b43_phy_write(dev, B43_PHY_CCK(0x2F), 0); - if (lo->rebuild) + + /* Re-measure the txctl values, if needed. */ + if (time_before(lo->txctl_measured_time, + jiffies - B43_LO_TXCTL_EXPIRE)) lo_measure_txctl_values(dev); + if (phy->type == B43_PHYTYPE_G && phy->rev >= 3) { b43_phy_write(dev, B43_PHY_LO_MASK, 0xC078); } else { @@ -707,7 +520,6 @@ static void lo_measure_restore(struct b43_wldev *dev, struct lo_g_saved_values *sav) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; u16 tmp; if (phy->rev >= 2) { @@ -722,14 +534,6 @@ static void lo_measure_restore(struct b43_wldev *dev, tmp = (phy->pga_gain | 0xEFA0); b43_phy_write(dev, B43_PHY_PGACTL, tmp); } - if (b43_has_hardware_pctl(phy)) { - b43_gphy_dc_lt_init(dev); - } else { - if (lo->rebuild) - b43_lo_g_adjust_to(dev, 3, 2, 0); - else - b43_lo_g_adjust(dev); - } if (phy->type == B43_PHYTYPE_G) { if (phy->rev >= 3) b43_phy_write(dev, B43_PHY_CCK(0x2E), 0xC078); @@ -793,7 +597,6 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, struct b43_lo_g_statemachine *d) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; struct b43_loctl test_loctl; struct b43_loctl orig_loctl; struct b43_loctl prev_loctl = { @@ -852,7 +655,7 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, found_lower = 1; d->lowest_feedth = feedth; if ((d->nr_measured < 2) && - (!has_loopback_gain(phy) || lo->rebuild)) + !has_loopback_gain(phy)) break; } } @@ -874,7 +677,6 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, int *max_rx_gain) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; struct b43_lo_g_statemachine d; u16 feedth; int found_lower; @@ -883,18 +685,18 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, d.nr_measured = 0; d.state_val_multiplier = 1; - if (has_loopback_gain(phy) && !lo->rebuild) + if (has_loopback_gain(phy)) d.state_val_multiplier = 3; memcpy(&d.min_loctl, loctl, sizeof(struct b43_loctl)); - if (has_loopback_gain(phy) && lo->rebuild) + if (has_loopback_gain(phy)) max_repeat = 4; do { b43_lo_write(dev, &d.min_loctl); feedth = lo_measure_feedthrough(dev, phy->lna_gain, phy->pga_gain, phy->trsw_rx_gain); - if (!lo->rebuild && feedth < 0x258) { + if (feedth < 0x258) { if (feedth >= 0x12C) *max_rx_gain += 6; else @@ -944,278 +746,188 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, } while (++repeat_cnt < max_repeat); } -#if B43_CALIB_ALL_LOCTLS -static const struct b43_rfatt b43_full_rfatt_list_items[] = { - { .att = 0, .with_padmix = 0, }, - { .att = 1, .with_padmix = 0, }, - { .att = 2, .with_padmix = 0, }, - { .att = 3, .with_padmix = 0, }, - { .att = 4, .with_padmix = 0, }, - { .att = 5, .with_padmix = 0, }, - { .att = 6, .with_padmix = 0, }, - { .att = 7, .with_padmix = 0, }, - { .att = 8, .with_padmix = 0, }, - { .att = 9, .with_padmix = 0, }, - { .att = 10, .with_padmix = 0, }, - { .att = 11, .with_padmix = 0, }, - { .att = 12, .with_padmix = 0, }, - { .att = 13, .with_padmix = 0, }, - { .att = 14, .with_padmix = 0, }, - { .att = 15, .with_padmix = 0, }, - { .att = 0, .with_padmix = 1, }, - { .att = 1, .with_padmix = 1, }, - { .att = 2, .with_padmix = 1, }, - { .att = 3, .with_padmix = 1, }, - { .att = 4, .with_padmix = 1, }, - { .att = 5, .with_padmix = 1, }, - { .att = 6, .with_padmix = 1, }, - { .att = 7, .with_padmix = 1, }, - { .att = 8, .with_padmix = 1, }, - { .att = 9, .with_padmix = 1, }, - { .att = 10, .with_padmix = 1, }, - { .att = 11, .with_padmix = 1, }, - { .att = 12, .with_padmix = 1, }, - { .att = 13, .with_padmix = 1, }, - { .att = 14, .with_padmix = 1, }, - { .att = 15, .with_padmix = 1, }, -}; -static const struct b43_rfatt_list b43_full_rfatt_list = { - .list = b43_full_rfatt_list_items, - .len = ARRAY_SIZE(b43_full_rfatt_list_items), -}; - -static const struct b43_bbatt b43_full_bbatt_list_items[] = { - { .att = 0, }, - { .att = 1, }, - { .att = 2, }, - { .att = 3, }, - { .att = 4, }, - { .att = 5, }, - { .att = 6, }, - { .att = 7, }, - { .att = 8, }, - { .att = 9, }, - { .att = 10, }, - { .att = 11, }, -}; -static const struct b43_bbatt_list b43_full_bbatt_list = { - .list = b43_full_bbatt_list_items, - .len = ARRAY_SIZE(b43_full_bbatt_list_items), -}; -#endif /* B43_CALIB_ALL_LOCTLS */ - -static void lo_measure(struct b43_wldev *dev) +static +struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, + const struct b43_bbatt *bbatt, + const struct b43_rfatt *rfatt) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; struct b43_loctl loctl = { .i = 0, .q = 0, }; - struct b43_loctl *ploctl; int max_rx_gain; - int rfidx, bbidx; - const struct b43_bbatt_list *bbatt_list; - const struct b43_rfatt_list *rfatt_list; - + struct b43_lo_calib *cal; + struct lo_g_saved_values uninitialized_var(saved_regs); /* Values from the "TXCTL Register and Value Table" */ u16 txctl_reg; u16 txctl_value; u16 pad_mix_gain; - bbatt_list = &lo->bbatt_list; - rfatt_list = &lo->rfatt_list; -#if B43_CALIB_ALL_LOCTLS - bbatt_list = &b43_full_bbatt_list; - rfatt_list = &b43_full_rfatt_list; -#endif + saved_regs.old_channel = phy->channel; + b43_mac_suspend(dev); + lo_measure_setup(dev, &saved_regs); txctl_reg = lo_txctl_register_table(dev, &txctl_value, &pad_mix_gain); - for (rfidx = 0; rfidx < rfatt_list->len; rfidx++) { - - b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) - & 0xFFF0) | - rfatt_list->list[rfidx].att); - b43_radio_write16(dev, txctl_reg, - (b43_radio_read16(dev, txctl_reg) - & ~txctl_value) - | (rfatt_list->list[rfidx].with_padmix ? - txctl_value : 0)); - - for (bbidx = 0; bbidx < bbatt_list->len; bbidx++) { - if (lo->rebuild) { -#if B43_CALIB_ALL_LOCTLS - ploctl = b43_get_lo_g_ctl(dev, - &rfatt_list->list[rfidx], - &bbatt_list->list[bbidx]); -#else - ploctl = b43_get_lo_g_ctl_nopadmix(dev, - &rfatt_list-> - list[rfidx], - &bbatt_list-> - list[bbidx]); -#endif - } else { - ploctl = b43_get_lo_g_ctl(dev, - &rfatt_list->list[rfidx], - &bbatt_list->list[bbidx]); - if (!ploctl->used) - continue; - } - memcpy(&loctl, ploctl, sizeof(loctl)); - loctl.i = 0; - loctl.q = 0; - - max_rx_gain = rfatt_list->list[rfidx].att * 2; - max_rx_gain += bbatt_list->list[bbidx].att / 2; - if (rfatt_list->list[rfidx].with_padmix) - max_rx_gain -= pad_mix_gain; - if (has_loopback_gain(phy)) - max_rx_gain += phy->max_lb_gain; - lo_measure_gain_values(dev, max_rx_gain, - has_loopback_gain(phy)); - - b43_phy_set_baseband_attenuation(dev, - bbatt_list->list[bbidx].att); - lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain); - if (phy->type == B43_PHYTYPE_B) { - loctl.i++; - loctl.q++; - } - b43_loctl_set_calibrated(&loctl, 1); - memcpy(ploctl, &loctl, sizeof(loctl)); - } - } -} - -#if B43_DEBUG -static void do_validate_loctl(struct b43_wldev *dev, struct b43_loctl *control) -{ - const int is_initializing = (b43_status(dev) == B43_STAT_UNINIT); - int i = control->i; - int q = control->q; + b43_radio_write16(dev, 0x43, + (b43_radio_read16(dev, 0x43) & 0xFFF0) + | rfatt->att); + b43_radio_write16(dev, txctl_reg, + (b43_radio_read16(dev, txctl_reg) & ~txctl_value) + | (rfatt->with_padmix) ? txctl_value : 0); - if (b43_loctl_is_calibrated(control)) { - if ((abs(i) > 16) || (abs(q) > 16)) - goto error; - } else { - if (control->used) - goto error; - if (dev->phy.lo_control->rebuild) { - control->i = 0; - control->q = 0; - if ((i != B43_LOCTL_POISON) || - (q != B43_LOCTL_POISON)) - goto error; - } + max_rx_gain = rfatt->att * 2; + max_rx_gain += bbatt->att / 2; + if (rfatt->with_padmix) + max_rx_gain -= pad_mix_gain; + if (has_loopback_gain(phy)) + max_rx_gain += phy->max_lb_gain; + lo_measure_gain_values(dev, max_rx_gain, + has_loopback_gain(phy)); + + b43_phy_set_baseband_attenuation(dev, bbatt->att); + lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain); + + lo_measure_restore(dev, &saved_regs); + b43_mac_enable(dev); + + if (b43_debug(dev, B43_DBG_LO)) { + b43dbg(dev->wl, "LO: Calibrated for BB(%u), RF(%u,%u) " + "=> I=%d Q=%d\n", + bbatt->att, rfatt->att, rfatt->with_padmix, + loctl.i, loctl.q); } - if (is_initializing && control->used) - goto error; - - return; -error: - b43err(dev->wl, "LO control pair validation failed " - "(I: %d, Q: %d, used %u, calib: %u, initing: %d)\n", - i, q, control->used, - b43_loctl_is_calibrated(control), - is_initializing); -} -static void validate_all_loctls(struct b43_wldev *dev) -{ - b43_call_for_each_loctl(dev, do_validate_loctl); -} - -static void do_reset_calib(struct b43_wldev *dev, struct b43_loctl *control) -{ - if (dev->phy.lo_control->rebuild || - control->used) { - b43_loctl_set_calibrated(control, 0); - control->i = B43_LOCTL_POISON; - control->q = B43_LOCTL_POISON; + cal = kmalloc(sizeof(*cal), GFP_KERNEL); + if (!cal) { + b43warn(dev->wl, "LO calib: out of memory\n"); + return NULL; } + memcpy(&cal->bbatt, bbatt, sizeof(*bbatt)); + memcpy(&cal->rfatt, rfatt, sizeof(*rfatt)); + memcpy(&cal->ctl, &loctl, sizeof(loctl)); + cal->calib_time = jiffies; + INIT_LIST_HEAD(&cal->list); + + return cal; } -static void reset_all_loctl_calibration_states(struct b43_wldev *dev) +/* Get a calibrated LO setting for the given attenuation values. + * Might return a NULL pointer under OOM! */ +static +struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, + const struct b43_bbatt *bbatt, + const struct b43_rfatt *rfatt) { - b43_call_for_each_loctl(dev, do_reset_calib); + struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_lo_calib *c; + + c = b43_find_lo_calib(lo, bbatt, rfatt); + if (c) + return c; + /* Not in the list of calibrated LO settings. + * Calibrate it now. */ + c = b43_calibrate_lo_setting(dev, bbatt, rfatt); + if (!c) + return NULL; + list_add(&c->list, &lo->calib_list); + + return c; } -#else /* B43_DEBUG */ -static inline void validate_all_loctls(struct b43_wldev *dev) { } -static inline void reset_all_loctl_calibration_states(struct b43_wldev *dev) { } -#endif /* B43_DEBUG */ - -void b43_lo_g_measure(struct b43_wldev *dev) +void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all) { struct b43_phy *phy = &dev->phy; - struct lo_g_saved_values uninitialized_var(sav); - - B43_WARN_ON((phy->type != B43_PHYTYPE_B) && - (phy->type != B43_PHYTYPE_G)); - - sav.old_channel = phy->channel; - lo_measure_setup(dev, &sav); - reset_all_loctl_calibration_states(dev); - lo_measure(dev); - lo_measure_restore(dev, &sav); - - validate_all_loctls(dev); + struct b43_txpower_lo_control *lo = phy->lo_control; + int i; + int rf_offset, bb_offset; + const struct b43_rfatt *rfatt; + const struct b43_bbatt *bbatt; + u64 power_vector; + bool table_changed = 0; - phy->lo_control->lo_measured = 1; - phy->lo_control->rebuild = 0; -} + BUILD_BUG_ON(B43_DC_LT_SIZE != 32); + B43_WARN_ON(lo->rfatt_list.len * lo->bbatt_list.len > 64); -#if B43_DEBUG -static void validate_loctl_calibration(struct b43_wldev *dev, - struct b43_loctl *loctl, - struct b43_rfatt *rfatt, - struct b43_bbatt *bbatt) -{ - if (b43_loctl_is_calibrated(loctl)) - return; - if (!dev->phy.lo_control->lo_measured) { - /* On init we set the attenuation values before we - * calibrated the LO. I guess that's OK. */ - return; + power_vector = lo->power_vector; + if (!update_all && !power_vector) + return; /* Nothing to do. */ + + /* Suspend the MAC now to avoid continuous suspend/enable + * cycles in the loop. */ + b43_mac_suspend(dev); + + for (i = 0; i < B43_DC_LT_SIZE * 2; i++) { + struct b43_lo_calib *cal; + int idx; + u16 val; + + if (!update_all && !(power_vector & (((u64)1ULL) << i))) + continue; + /* Update the table entry for this power_vector bit. + * The table rows are RFatt entries and columns are BBatt. */ + bb_offset = i / lo->rfatt_list.len; + rf_offset = i % lo->rfatt_list.len; + bbatt = &(lo->bbatt_list.list[bb_offset]); + rfatt = &(lo->rfatt_list.list[rf_offset]); + + cal = b43_calibrate_lo_setting(dev, bbatt, rfatt); + if (!cal) { + b43warn(dev->wl, "LO: Could not " + "calibrate DC table entry\n"); + continue; + } + /*FIXME: Is Q really in the low nibble? */ + val = (u8)(cal->ctl.q); + val |= ((u8)(cal->ctl.i)) << 4; + kfree(cal); + + /* Get the index into the hardware DC LT. */ + idx = i / 2; + /* Change the table in memory. */ + if (i % 2) { + /* Change the high byte. */ + lo->dc_lt[idx] = (lo->dc_lt[idx] & 0x00FF) + | ((val & 0x00FF) << 8); + } else { + /* Change the low byte. */ + lo->dc_lt[idx] = (lo->dc_lt[idx] & 0xFF00) + | (val & 0x00FF); + } + table_changed = 1; } - b43err(dev->wl, "Adjusting Local Oscillator to an uncalibrated " - "control pair: rfatt=%u,%spadmix bbatt=%u\n", - rfatt->att, - (rfatt->with_padmix) ? "" : "no-", - bbatt->att); -} -#else -static inline void validate_loctl_calibration(struct b43_wldev *dev, - struct b43_loctl *loctl, - struct b43_rfatt *rfatt, - struct b43_bbatt *bbatt) -{ + if (table_changed) { + /* The table changed in memory. Update the hardware table. */ + for (i = 0; i < B43_DC_LT_SIZE; i++) + b43_phy_write(dev, 0x3A0 + i, lo->dc_lt[i]); + } + b43_mac_enable(dev); } -#endif -static inline void fixup_rfatt_for_txcontrol(struct b43_rfatt *rf, - u8 tx_control) +/* Fixup the RF attenuation value for the case where we are + * using the PAD mixer. */ +static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf) { - if (tx_control & B43_TXCTL_TXMIX) { - if (rf->att < 5) - rf->att = 4; - } + if (!rf->with_padmix) + return; + if ((rf->att != 1) && (rf->att != 2) && (rf->att != 3)) + rf->att = 4; } void b43_lo_g_adjust(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; + struct b43_lo_calib *cal; struct b43_rfatt rf; - struct b43_loctl *loctl; memcpy(&rf, &phy->rfatt, sizeof(rf)); - fixup_rfatt_for_txcontrol(&rf, phy->tx_control); + b43_lo_fixup_rfatt(&rf); - loctl = b43_get_lo_g_ctl(dev, &rf, &phy->bbatt); - validate_loctl_calibration(dev, loctl, &rf, &phy->bbatt); - b43_lo_write(dev, loctl); + cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf); + if (!cal) + return; + b43_lo_write(dev, &cal->ctl); } void b43_lo_g_adjust_to(struct b43_wldev *dev, @@ -1223,39 +935,102 @@ void b43_lo_g_adjust_to(struct b43_wldev *dev, { struct b43_rfatt rf; struct b43_bbatt bb; - struct b43_loctl *loctl; + struct b43_lo_calib *cal; memset(&rf, 0, sizeof(rf)); memset(&bb, 0, sizeof(bb)); rf.att = rfatt; bb.att = bbatt; - fixup_rfatt_for_txcontrol(&rf, tx_control); - loctl = b43_get_lo_g_ctl(dev, &rf, &bb); - validate_loctl_calibration(dev, loctl, &rf, &bb); - b43_lo_write(dev, loctl); + b43_lo_fixup_rfatt(&rf); + cal = b43_get_calib_lo_settings(dev, &bb, &rf); + if (!cal) + return; + b43_lo_write(dev, &cal->ctl); } -static void do_mark_unused(struct b43_wldev *dev, struct b43_loctl *control) +/* Periodic LO maintanance work */ +void b43_lo_g_maintanance_work(struct b43_wldev *dev) { - control->used = 0; + struct b43_phy *phy = &dev->phy; + struct b43_txpower_lo_control *lo = phy->lo_control; + unsigned long now; + unsigned long expire; + struct b43_lo_calib *cal, *tmp; + bool current_item_expired = 0; + bool hwpctl; + + if (!lo) + return; + now = jiffies; + hwpctl = b43_has_hardware_pctl(phy); + + if (hwpctl) { + /* Read the power vector and update it, if needed. */ + expire = now - B43_LO_PWRVEC_EXPIRE; + if (time_before(lo->pwr_vec_read_time, expire)) { + lo_read_power_vector(dev); + b43_gphy_dc_lt_init(dev, 0); + } + //FIXME Recalc the whole DC table from time to time? + } + + if (hwpctl) + return; + /* Search for expired LO settings. Remove them. + * Recalibrate the current setting, if expired. */ + expire = now - B43_LO_CALIB_EXPIRE; + list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) { + if (!time_before(cal->calib_time, expire)) + continue; + /* This item expired. */ + if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && + b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) { + B43_WARN_ON(current_item_expired); + current_item_expired = 1; + } + if (b43_debug(dev, B43_DBG_LO)) { + b43dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), " + "I=%d, Q=%d expired\n", + cal->bbatt.att, cal->rfatt.att, + cal->rfatt.with_padmix, + cal->ctl.i, cal->ctl.q); + } + list_del(&cal->list); + kfree(cal); + } + if (current_item_expired || unlikely(list_empty(&lo->calib_list))) { + /* Recalibrate currently used LO setting. */ + if (b43_debug(dev, B43_DBG_LO)) + b43dbg(dev->wl, "LO: Recalibrating current LO setting\n"); + cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt); + if (cal) { + list_add(&cal->list, &lo->calib_list); + b43_lo_write(dev, &cal->ctl); + } else + b43warn(dev->wl, "Failed to recalibrate current LO setting\n"); + } } -void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev) +void b43_lo_g_cleanup(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_lo_calib *cal, *tmp; - b43_call_for_each_loctl(dev, do_mark_unused); - lo->rebuild = 1; + if (!lo) + return; + list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) { + list_del(&cal->list); + kfree(cal); + } } -void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev) +/* LO Initialization */ +void b43_lo_g_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_rfatt rf; - memcpy(&rf, &phy->rfatt, sizeof(rf)); - fixup_rfatt_for_txcontrol(&rf, phy->tx_control); - - b43_get_lo_g_ctl(dev, &rf, &phy->bbatt)->used = 1; + if (b43_has_hardware_pctl(phy)) { + lo_read_power_vector(dev); + b43_gphy_dc_lt_init(dev, 1); + } } diff --git a/drivers/net/wireless/b43/lo.h b/drivers/net/wireless/b43/lo.h index 455615d1f8c..1da321cabc1 100644 --- a/drivers/net/wireless/b43/lo.h +++ b/drivers/net/wireless/b43/lo.h @@ -10,82 +10,63 @@ struct b43_loctl { /* Control values. */ s8 i; s8 q; - /* "Used by hardware" flag. */ - bool used; -#ifdef CONFIG_B43_DEBUG - /* Is this lo-control-array entry calibrated? */ - bool calibrated; -#endif }; - /* Debugging: Poison value for i and q values. */ #define B43_LOCTL_POISON 111 -/* loctl->calibrated debugging mechanism */ -#ifdef CONFIG_B43_DEBUG -static inline void b43_loctl_set_calibrated(struct b43_loctl *loctl, - bool calibrated) -{ - loctl->calibrated = calibrated; -} -static inline bool b43_loctl_is_calibrated(struct b43_loctl *loctl) -{ - return loctl->calibrated; -} -#else -static inline void b43_loctl_set_calibrated(struct b43_loctl *loctl, - bool calibrated) -{ -} -static inline bool b43_loctl_is_calibrated(struct b43_loctl *loctl) -{ - return 1; -} -#endif - -/* TX Power LO Control Array. - * Value-pairs to adjust the LocalOscillator are stored - * in this structure. - * There are two different set of values. One for "Flag is Set" - * and one for "Flag is Unset". - * By "Flag" the flag in struct b43_rfatt is meant. - * The Value arrays are two-dimensional. The first index - * is the baseband attenuation and the second index - * is the radio attenuation. - * Use b43_get_lo_g_ctl() to retrieve a value from the lists. - */ +/* This struct holds calibrated LO settings for a set of + * Baseband and RF attenuation settings. */ +struct b43_lo_calib { + /* The set of attenuation values this set of LO + * control values is calibrated for. */ + struct b43_bbatt bbatt; + struct b43_rfatt rfatt; + /* The set of control values for the LO. */ + struct b43_loctl ctl; + /* The time when these settings were calibrated (in jiffies) */ + unsigned long calib_time; + /* List. */ + struct list_head list; +}; + +/* Size of the DC Lookup Table in 16bit words. */ +#define B43_DC_LT_SIZE 32 + +/* Local Oscillator calibration information */ struct b43_txpower_lo_control { -#define B43_NR_BB 12 -#define B43_NR_RF 16 - /* LO Control values, with PAD Mixer */ - struct b43_loctl with_padmix[B43_NR_BB][B43_NR_RF]; - /* LO Control values, without PAD Mixer */ - struct b43_loctl no_padmix[B43_NR_BB][B43_NR_RF]; - - /* Flag to indicate a complete rebuild of the two tables above - * to the LO measuring code. */ - bool rebuild; - - /* Lists of valid RF and BB attenuation values for this device. */ + /* Lists of RF and BB attenuation values for this device. + * Used for building hardware power control tables. */ struct b43_rfatt_list rfatt_list; struct b43_bbatt_list bbatt_list; + /* The DC Lookup Table is cached in memory here. + * Note that this is only used for Hardware Power Control. */ + u16 dc_lt[B43_DC_LT_SIZE]; + + /* List of calibrated control values (struct b43_lo_calib). */ + struct list_head calib_list; + /* Last time the power vector was read (jiffies). */ + unsigned long pwr_vec_read_time; + /* Last time the txctl values were measured (jiffies). */ + unsigned long txctl_measured_time; + /* Current TX Bias value */ u8 tx_bias; /* Current TX Magnification Value (if used by the device) */ u8 tx_magn; - /* GPHY LO is measured. */ - bool lo_measured; - /* Saved device PowerVector */ u64 power_vector; }; -/* Measure the BPHY Local Oscillator. */ -void b43_lo_b_measure(struct b43_wldev *dev); -/* Measure the BPHY/GPHY Local Oscillator. */ -void b43_lo_g_measure(struct b43_wldev *dev); +/* Calibration expire timeouts. + * Timeouts must be multiple of 15 seconds. To make sure + * the item really expired when the 15 second timer hits, we + * subtract two additional seconds from the timeout. */ +#define B43_LO_CALIB_EXPIRE (HZ * (30 - 2)) +#define B43_LO_PWRVEC_EXPIRE (HZ * (30 - 2)) +#define B43_LO_TXCTL_EXPIRE (HZ * (180 - 4)) + /* Adjust the Local Oscillator to the saved attenuation * and txctl values. @@ -95,18 +76,10 @@ void b43_lo_g_adjust(struct b43_wldev *dev); void b43_lo_g_adjust_to(struct b43_wldev *dev, u16 rfatt, u16 bbatt, u16 tx_control); -/* Mark all possible b43_lo_g_ctl as "unused" */ -void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev); -/* Mark the b43_lo_g_ctl corresponding to the current - * attenuation values as used. - */ -void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev); +void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all); -/* Get a reference to a LO Control value pair in the - * TX Power LO Control Array. - */ -struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev, - const struct b43_rfatt *rfatt, - const struct b43_bbatt *bbatt); +void b43_lo_g_maintanance_work(struct b43_wldev *dev); +void b43_lo_g_cleanup(struct b43_wldev *dev); +void b43_lo_g_init(struct b43_wldev *dev); #endif /* B43_LO_H_ */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 8fdba9415c0..c6e79a15d3c 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2308,7 +2308,7 @@ static void b43_gpio_cleanup(struct b43_wldev *dev) } /* http://bcm-specs.sipsolutions.net/EnableMac */ -static void b43_mac_enable(struct b43_wldev *dev) +void b43_mac_enable(struct b43_wldev *dev) { dev->mac_suspended--; B43_WARN_ON(dev->mac_suspended < 0); @@ -2322,16 +2322,11 @@ static void b43_mac_enable(struct b43_wldev *dev) b43_read32(dev, B43_MMIO_MACCTL); b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); b43_power_saving_ctl_bits(dev, 0); - - /* Re-enable IRQs. */ - spin_lock_irq(&dev->wl->irq_lock); - b43_interrupt_enable(dev, dev->irq_savedstate); - spin_unlock_irq(&dev->wl->irq_lock); } } /* http://bcm-specs.sipsolutions.net/SuspendMAC */ -static void b43_mac_suspend(struct b43_wldev *dev) +void b43_mac_suspend(struct b43_wldev *dev) { int i; u32 tmp; @@ -2340,14 +2335,6 @@ static void b43_mac_suspend(struct b43_wldev *dev) B43_WARN_ON(dev->mac_suspended < 0); if (dev->mac_suspended == 0) { - /* Mask IRQs before suspending MAC. Otherwise - * the MAC stays busy and won't suspend. */ - spin_lock_irq(&dev->wl->irq_lock); - tmp = b43_interrupt_disable(dev, B43_IRQ_ALL); - spin_unlock_irq(&dev->wl->irq_lock); - b43_synchronize_irq(dev); - dev->irq_savedstate = tmp; - b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) @@ -2503,6 +2490,7 @@ static void b43_chip_exit(struct b43_wldev *dev) { b43_radio_turn_off(dev, 1); b43_gpio_cleanup(dev); + b43_lo_g_cleanup(dev); /* firmware is released later */ } @@ -2609,28 +2597,12 @@ err_gpio_clean: return err; } -static void b43_periodic_every120sec(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->type != B43_PHYTYPE_G || phy->rev < 2) - return; - - b43_mac_suspend(dev); - b43_lo_g_measure(dev); - b43_mac_enable(dev); - if (b43_has_hardware_pctl(phy)) - b43_lo_g_ctl_mark_all_unused(dev); -} - static void b43_periodic_every60sec(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; if (phy->type != B43_PHYTYPE_G) return; - if (!b43_has_hardware_pctl(phy)) - b43_lo_g_ctl_mark_all_unused(dev); if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { b43_mac_suspend(dev); b43_calc_nrssi_slope(dev); @@ -2682,6 +2654,7 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) } } b43_phy_xmitpower(dev); //FIXME: unless scanning? + b43_lo_g_maintanance_work(dev); //TODO for APHY (temperature?) atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); @@ -2693,8 +2666,6 @@ static void do_periodic_work(struct b43_wldev *dev) unsigned int state; state = dev->periodic_state; - if (state % 8 == 0) - b43_periodic_every120sec(dev); if (state % 4 == 0) b43_periodic_every60sec(dev); if (state % 2 == 0) @@ -3025,8 +2996,7 @@ static void b43_qos_update_work(struct work_struct *work) mutex_unlock(&wl->mutex); } -static int b43_op_conf_tx(struct ieee80211_hw *hw, - int _queue, +static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, const struct ieee80211_tx_queue_params *params) { struct b43_wl *wl = hw_to_b43_wl(hw); @@ -3668,8 +3638,8 @@ static void setup_struct_phy_for_init(struct b43_wldev *dev, lo = phy->lo_control; if (lo) { memset(lo, 0, sizeof(*(phy->lo_control))); - lo->rebuild = 1; lo->tx_bias = 0xFF; + INIT_LIST_HEAD(&lo->calib_list); } phy->max_lb_gain = 0; phy->trsw_rx_gain = 0; diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index 5230aeca78b..dad23c42b42 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -114,4 +114,7 @@ void b43_controller_restart(struct b43_wldev *dev, const char *reason); #define B43_PS_ASLEEP (1 << 3) /* Force device asleep */ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags); +void b43_mac_suspend(struct b43_wldev *dev); +void b43_mac_enable(struct b43_wldev *dev); + #endif /* B43_MAIN_H_ */ diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy.c index de024dc0371..8b3c24da8db 100644 --- a/drivers/net/wireless/b43/phy.c +++ b/drivers/net/wireless/b43/phy.c @@ -145,8 +145,7 @@ static void generate_rfatt_list(struct b43_wldev *dev, {.att = 9,.with_padmix = 1,}, }; - if ((phy->type == B43_PHYTYPE_A && phy->rev < 5) || - (phy->type == B43_PHYTYPE_G && phy->rev < 6)) { + if (!b43_has_hardware_pctl(phy)) { /* Software pctl */ list->list = rfatt_0; list->len = ARRAY_SIZE(rfatt_0); @@ -158,7 +157,7 @@ static void generate_rfatt_list(struct b43_wldev *dev, /* Hardware pctl */ list->list = rfatt_1; list->len = ARRAY_SIZE(rfatt_1); - list->min_val = 2; + list->min_val = 0; list->max_val = 14; return; } @@ -346,6 +345,7 @@ void b43_set_txpower_g(struct b43_wldev *dev, /* Save the values for later */ phy->tx_control = tx_control; memcpy(&phy->rfatt, rfatt, sizeof(*rfatt)); + phy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); memcpy(&phy->bbatt, bbatt, sizeof(*bbatt)); if (b43_debug(dev, B43_DBG_XMITPOWER)) { @@ -559,11 +559,6 @@ static void b43_gphy_gain_lt_init(struct b43_wldev *dev) u16 tmp; u8 rf, bb; - if (!lo->lo_measured) { - b43_phy_write(dev, 0x3FF, 0); - return; - } - for (rf = 0; rf < lo->rfatt_list.len; rf++) { for (bb = 0; bb < lo->bbatt_list.len; bb++) { if (nr_written >= 0x40) @@ -581,42 +576,6 @@ static void b43_gphy_gain_lt_init(struct b43_wldev *dev) } } -/* GPHY_DC_Lookup_Table */ -void b43_gphy_dc_lt_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; - struct b43_loctl *loctl0; - struct b43_loctl *loctl1; - int i; - int rf_offset, bb_offset; - u16 tmp; - - for (i = 0; i < lo->rfatt_list.len + lo->bbatt_list.len; i += 2) { - rf_offset = i / lo->rfatt_list.len; - bb_offset = i % lo->rfatt_list.len; - - loctl0 = b43_get_lo_g_ctl(dev, &lo->rfatt_list.list[rf_offset], - &lo->bbatt_list.list[bb_offset]); - if (i + 1 < lo->rfatt_list.len * lo->bbatt_list.len) { - rf_offset = (i + 1) / lo->rfatt_list.len; - bb_offset = (i + 1) % lo->rfatt_list.len; - - loctl1 = - b43_get_lo_g_ctl(dev, - &lo->rfatt_list.list[rf_offset], - &lo->bbatt_list.list[bb_offset]); - } else - loctl1 = loctl0; - - tmp = ((u16) loctl0->q & 0xF); - tmp |= ((u16) loctl0->i & 0xF) << 4; - tmp |= ((u16) loctl1->q & 0xF) << 8; - tmp |= ((u16) loctl1->i & 0xF) << 12; //FIXME? - b43_phy_write(dev, 0x3A0 + (i / 2), tmp); - } -} - static void hardware_pctl_init_aphy(struct b43_wldev *dev) { //TODO @@ -643,7 +602,7 @@ static void hardware_pctl_init_gphy(struct b43_wldev *dev) b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) & 0xFFBF); - b43_gphy_dc_lt_init(dev); + b43_gphy_dc_lt_init(dev, 1); } /* HardwarePowerControl init for A and G PHY */ @@ -931,109 +890,6 @@ static void b43_phy_inita(struct b43_wldev *dev) } } -static void b43_phy_initb2(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 offset, val; - - b43_write16(dev, 0x03EC, 0x3F22); - b43_phy_write(dev, 0x0020, 0x301C); - b43_phy_write(dev, 0x0026, 0x0000); - b43_phy_write(dev, 0x0030, 0x00C6); - b43_phy_write(dev, 0x0088, 0x3E00); - val = 0x3C3D; - for (offset = 0x0089; offset < 0x00A7; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - b43_phy_write(dev, 0x03E4, 0x3000); - b43_radio_selectchannel(dev, phy->channel, 0); - if (phy->radio_ver != 0x2050) { - b43_radio_write16(dev, 0x0075, 0x0080); - b43_radio_write16(dev, 0x0079, 0x0081); - } - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x005A, 0x0070); - b43_radio_write16(dev, 0x005B, 0x007B); - b43_radio_write16(dev, 0x005C, 0x00B0); - b43_radio_write16(dev, 0x007A, 0x000F); - b43_phy_write(dev, 0x0038, 0x0677); - b43_radio_init2050(dev); - } - b43_phy_write(dev, 0x0014, 0x0080); - b43_phy_write(dev, 0x0032, 0x00CA); - b43_phy_write(dev, 0x0032, 0x00CC); - b43_phy_write(dev, 0x0035, 0x07C2); - b43_lo_b_measure(dev); - b43_phy_write(dev, 0x0026, 0xCC00); - if (phy->radio_ver != 0x2050) - b43_phy_write(dev, 0x0026, 0xCE00); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, 0x1000); - b43_phy_write(dev, 0x002A, 0x88A3); - if (phy->radio_ver != 0x2050) - b43_phy_write(dev, 0x002A, 0x88C2); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - b43_phy_init_pctl(dev); -} - -static void b43_phy_initb4(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 offset, val; - - b43_write16(dev, 0x03EC, 0x3F22); - b43_phy_write(dev, 0x0020, 0x301C); - b43_phy_write(dev, 0x0026, 0x0000); - b43_phy_write(dev, 0x0030, 0x00C6); - b43_phy_write(dev, 0x0088, 0x3E00); - val = 0x3C3D; - for (offset = 0x0089; offset < 0x00A7; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - b43_phy_write(dev, 0x03E4, 0x3000); - b43_radio_selectchannel(dev, phy->channel, 0); - if (phy->radio_ver != 0x2050) { - b43_radio_write16(dev, 0x0075, 0x0080); - b43_radio_write16(dev, 0x0079, 0x0081); - } - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x005A, 0x0070); - b43_radio_write16(dev, 0x005B, 0x007B); - b43_radio_write16(dev, 0x005C, 0x00B0); - b43_radio_write16(dev, 0x007A, 0x000F); - b43_phy_write(dev, 0x0038, 0x0677); - b43_radio_init2050(dev); - } - b43_phy_write(dev, 0x0014, 0x0080); - b43_phy_write(dev, 0x0032, 0x00CA); - if (phy->radio_ver == 0x2050) - b43_phy_write(dev, 0x0032, 0x00E0); - b43_phy_write(dev, 0x0035, 0x07C2); - - b43_lo_b_measure(dev); - - b43_phy_write(dev, 0x0026, 0xCC00); - if (phy->radio_ver == 0x2050) - b43_phy_write(dev, 0x0026, 0xCE00); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, 0x1100); - b43_phy_write(dev, 0x002A, 0x88A3); - if (phy->radio_ver == 0x2050) - b43_phy_write(dev, 0x002A, 0x88C2); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { - b43_calc_nrssi_slope(dev); - b43_calc_nrssi_threshold(dev); - } - b43_phy_init_pctl(dev); -} - static void b43_phy_initb5(struct b43_wldev *dev) { struct ssb_bus *bus = dev->dev->bus; @@ -1259,19 +1115,9 @@ static void b43_phy_initb6(struct b43_wldev *dev) b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) | 0x0004); } - if (phy->type == B43_PHYTYPE_B) { - b43_write16(dev, 0x03E6, 0x8140); - b43_phy_write(dev, 0x0016, 0x0410); - b43_phy_write(dev, 0x0017, 0x0820); - b43_phy_write(dev, 0x0062, 0x0007); - b43_radio_init2050(dev); - b43_lo_g_measure(dev); - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { - b43_calc_nrssi_slope(dev); - b43_calc_nrssi_threshold(dev); - } - b43_phy_init_pctl(dev); - } else if (phy->type == B43_PHYTYPE_G) + if (phy->type == B43_PHYTYPE_B) + B43_WARN_ON(1); + else if (phy->type == B43_PHYTYPE_G) b43_write16(dev, 0x03E6, 0x0); } @@ -1534,34 +1380,31 @@ static void b43_phy_initg(struct b43_wldev *dev) else b43_radio_write16(dev, 0x0078, phy->initval); } - if (phy->lo_control->tx_bias == 0xFF) { - b43_lo_g_measure(dev); + b43_lo_g_init(dev); + if (has_tx_magnification(phy)) { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFF00) + | phy->lo_control->tx_bias | phy-> + lo_control->tx_magn); } else { - if (has_tx_magnification(phy)) { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFF00) - | phy->lo_control->tx_bias | phy-> - lo_control->tx_magn); - } else { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFFF0) - | phy->lo_control->tx_bias); - } - if (phy->rev >= 6) { - b43_phy_write(dev, B43_PHY_CCK(0x36), - (b43_phy_read(dev, B43_PHY_CCK(0x36)) - & 0x0FFF) | (phy->lo_control-> - tx_bias << 12)); - } - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); - else - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); - if (phy->rev < 2) - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); - else - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFFF0) + | phy->lo_control->tx_bias); } + if (phy->rev >= 6) { + b43_phy_write(dev, B43_PHY_CCK(0x36), + (b43_phy_read(dev, B43_PHY_CCK(0x36)) + & 0x0FFF) | (phy->lo_control-> + tx_bias << 12)); + } + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); + else + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); + if (phy->rev < 2) + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); + else + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); if (phy->gmode || phy->rev >= 2) { b43_lo_g_adjust(dev); b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); @@ -1821,10 +1664,8 @@ void b43_phy_xmitpower(struct b43_wldev *dev) bbatt_delta -= 4 * rfatt_delta; /* So do we finally need to adjust something? */ - if ((rfatt_delta == 0) && (bbatt_delta == 0)) { - b43_lo_g_ctl_mark_cur_used(dev); + if ((rfatt_delta == 0) && (bbatt_delta == 0)) return; - } /* Calculate the new attenuation values. */ bbatt = phy->bbatt.att; @@ -1870,7 +1711,6 @@ void b43_phy_xmitpower(struct b43_wldev *dev) b43_radio_lock(dev); b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - b43_lo_g_ctl_mark_cur_used(dev); b43_radio_unlock(dev); b43_phy_unlock(dev); break; @@ -2007,24 +1847,6 @@ int b43_phy_init(struct b43_wldev *dev) else unsupported = 1; break; - case B43_PHYTYPE_B: - switch (phy->rev) { - case 2: - b43_phy_initb2(dev); - break; - case 4: - b43_phy_initb4(dev); - break; - case 5: - b43_phy_initb5(dev); - break; - case 6: - b43_phy_initb6(dev); - break; - default: - unsupported = 1; - } - break; case B43_PHYTYPE_G: b43_phy_initg(dev); break; diff --git a/drivers/net/wireless/b43/phy.h b/drivers/net/wireless/b43/phy.h index 6d165d82217..4aab1090352 100644 --- a/drivers/net/wireless/b43/phy.h +++ b/drivers/net/wireless/b43/phy.h @@ -225,7 +225,6 @@ int b43_phy_init(struct b43_wldev *dev); void b43_set_rx_antenna(struct b43_wldev *dev, int antenna); void b43_phy_xmitpower(struct b43_wldev *dev); -void b43_gphy_dc_lt_init(struct b43_wldev *dev); /* Returns the boolean whether the board has HardwarePowerControl */ bool b43_has_hardware_pctl(struct b43_phy *phy); @@ -252,6 +251,14 @@ struct b43_rfatt_list { u8 max_val; }; +/* Returns true, if the values are the same. */ +static inline bool b43_compare_rfatt(const struct b43_rfatt *a, + const struct b43_rfatt *b) +{ + return ((a->att == b->att) && + (a->with_padmix == b->with_padmix)); +} + /* Baseband Attenuation */ struct b43_bbatt { u8 att; /* Attenuation value */ @@ -265,6 +272,13 @@ struct b43_bbatt_list { u8 max_val; }; +/* Returns true, if the values are the same. */ +static inline bool b43_compare_bbatt(const struct b43_bbatt *a, + const struct b43_bbatt *b) +{ + return (a->att == b->att); +} + /* tx_control bits. */ #define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ #define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index fcacafb0434..08c8a087f30 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -611,18 +611,16 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev, { const int nr_queues = dev->wl->hw->queues; struct b43_pio_txqueue *q; - struct ieee80211_tx_queue_stats_data *data; unsigned long flags; int i; for (i = 0; i < nr_queues; i++) { - data = &(stats->data[i]); q = select_queue_by_priority(dev, i); spin_lock_irqsave(&q->lock, flags); - data->len = B43_PIO_MAX_NR_TXPACKETS - q->free_packet_slots; - data->limit = B43_PIO_MAX_NR_TXPACKETS; - data->count = q->nr_tx_packets; + stats[i].len = B43_PIO_MAX_NR_TXPACKETS - q->free_packet_slots; + stats[i].limit = B43_PIO_MAX_NR_TXPACKETS; + stats[i].count = q->nr_tx_packets; spin_unlock_irqrestore(&q->lock, flags); } } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 19aefbfb2c9..88491947a20 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len + FCS_LEN; if (use_encryption) { - u8 key_idx = (u16) (txctl->key_idx); + u8 key_idx = txctl->hw_key->hw_key_idx; struct b43_key *key; int wlhdr_len; size_t iv_len; diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index c990f87b107..d6686f713b6 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -1455,18 +1455,16 @@ void b43legacy_dma_get_tx_stats(struct b43legacy_wldev *dev, { const int nr_queues = dev->wl->hw->queues; struct b43legacy_dmaring *ring; - struct ieee80211_tx_queue_stats_data *data; unsigned long flags; int i; for (i = 0; i < nr_queues; i++) { - data = &(stats->data[i]); ring = priority_to_txring(dev, i); spin_lock_irqsave(&ring->lock, flags); - data->len = ring->used_slots / SLOTS_PER_PACKET; - data->limit = ring->nr_slots / SLOTS_PER_PACKET; - data->count = ring->nr_tx_packets; + stats[i].len = ring->used_slots / SLOTS_PER_PACKET; + stats[i].limit = ring->nr_slots / SLOTS_PER_PACKET; + stats[i].count = ring->nr_tx_packets; spin_unlock_irqrestore(&ring->lock, flags); } } diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 14a5eea2573..1ccc51e90a8 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2383,8 +2383,7 @@ out: return NETDEV_TX_OK; } -static int b43legacy_op_conf_tx(struct ieee80211_hw *hw, - int queue, +static int b43legacy_op_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params) { return 0; diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c index bcdd54eb2ed..8d3d27d3cd6 100644 --- a/drivers/net/wireless/b43legacy/pio.c +++ b/drivers/net/wireless/b43legacy/pio.c @@ -525,13 +525,11 @@ void b43legacy_pio_get_tx_stats(struct b43legacy_wldev *dev, { struct b43legacy_pio *pio = &dev->pio; struct b43legacy_pioqueue *queue; - struct ieee80211_tx_queue_stats_data *data; queue = pio->queue1; - data = &(stats->data[0]); - data->len = B43legacy_PIO_MAXTXPACKETS - queue->nr_txfree; - data->limit = B43legacy_PIO_MAXTXPACKETS; - data->count = queue->nr_tx_packets; + stats[0].len = B43legacy_PIO_MAXTXPACKETS - queue->nr_txfree; + stats[0].limit = B43legacy_PIO_MAXTXPACKETS; + stats[0].count = queue->nr_tx_packets; } static void pio_rx_error(struct b43legacy_pioqueue *queue, diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index dcad2491a60..fc83dab6e2c 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, plcp_fragment_len = fragment_len + FCS_LEN; if (use_encryption) { - u8 key_idx = (u16)(txctl->key_idx); + u8 key_idx = txctl->hw_key->hw_key_idx; struct b43legacy_key *key; int wlhdr_len; size_t iv_len; diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 62fb89d8231..995dd537083 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -14,6 +14,15 @@ config IWLWIFI_LEDS bool default n +config IWLWIFI_RUN_TIME_CALIB + bool + depends on IWLCORE + default n + ---help--- + This option will enable run time calibration for the iwlwifi driver. + These calibrations are Sensitivity and Chain Noise. + + config IWLWIFI_RFKILL boolean "IWLWIFI RF kill support" depends on IWLCORE @@ -67,12 +76,14 @@ config IWL4965_SPECTRUM_MEASUREMENT ---help--- This option will enable spectrum measurement for the iwl4965 driver. -config IWL4965_SENSITIVITY - bool "Enable Sensitivity Calibration in iwl4965 driver" +config IWL4965_RUN_TIME_CALIB + bool "Enable run time Calibration for 4965 NIC" + select IWLWIFI_RUN_TIME_CALIB depends on IWL4965 + default y ---help--- - This option will enable sensitivity calibration for the iwl4965 - driver. + This option will enable run time calibration for the iwl4965 driver. + These calibrations are Sensitivity and Chain Noise. If unsure, say yes config IWLWIFI_DEBUG bool "Enable full debugging output in iwl4965 driver" @@ -100,6 +111,23 @@ config IWLWIFI_DEBUG as the debug information can assist others in helping you resolve any problems you may encounter. +config IWL5000 + bool "Intel Wireless WiFi 5000AGN" + depends on IWL4965 + ---help--- + This option enables support for Intel Wireless WiFi Link 5000AGN Family + Dependency on 4965 is temporary + +config IWL5000_RUN_TIME_CALIB + bool "Enable run time Calibration for 5000 NIC" + select IWLWIFI_RUN_TIME_CALIB + depends on IWL5000 + default y + ---help--- + This option will enable run time calibration for the iwl5000 driver. + These calibrations are Sensitivity and Chain Noise. If unsure, say yes + + config IWLWIFI_DEBUGFS bool "Iwlwifi debugfs support" depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index ec6187b75c3..b0b2b5ebfa6 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -1,8 +1,9 @@ obj-$(CONFIG_IWLCORE) += iwlcore.o -iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o +iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o +iwlcore-$(CONFIG_IWLWIFI_RUN_TIME_CALIB) += iwl-calib.o obj-$(CONFIG_IWL3945) += iwl3945.o iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o @@ -11,3 +12,8 @@ iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o obj-$(CONFIG_IWL4965) += iwl4965.o iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-4965-rs.o iwl-sta.o +ifeq ($(CONFIG_IWL5000),y) + iwl4965-objs += iwl-5000.o +endif + + diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h index ad612a8719f..644bd9e0805 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h @@ -126,7 +126,7 @@ enum { EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ - EEPROM_CHANNEL_NARROW = (1 << 6), /* 10 MHz channel (not used) */ + /* Bit 6 Reserved (was Narrow Channel) */ EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ }; @@ -289,17 +289,6 @@ struct iwl3945_eeprom { #define PCI_REG_WUM8 0x0E8 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) -/* SCD (3945 Tx Frame Scheduler) */ -#define SCD_BASE (CSR_BASE + 0x2E00) - -#define SCD_MODE_REG (SCD_BASE + 0x000) -#define SCD_ARASTAT_REG (SCD_BASE + 0x004) -#define SCD_TXFACT_REG (SCD_BASE + 0x010) -#define SCD_TXF4MF_REG (SCD_BASE + 0x014) -#define SCD_TXF5MF_REG (SCD_BASE + 0x020) -#define SCD_SBYP_MODE_1_REG (SCD_BASE + 0x02C) -#define SCD_SBYP_MODE_2_REG (SCD_BASE + 0x030) - /*=== FH (data Flow Handler) ===*/ #define FH_BASE (0x800) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 85c22641542..e51eeeff699 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -29,7 +29,6 @@ #include <linux/skbuff.h> #include <linux/wireless.h> #include <net/mac80211.h> -#include <net/ieee80211.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 62a3d8f8563..9df48b33f0c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -1229,7 +1229,7 @@ int iwl3945_hw_nic_init(struct iwl3945_priv *priv) iwl3945_power_init_handle(priv); spin_lock_irqsave(&priv->lock, flags); - iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, (1 << 24)); + iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL); iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index c7695a215a3..fb96c62ad0f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -924,11 +924,6 @@ static inline int is_channel_valid(const struct iwl3945_channel_info *ch_info) return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; } -static inline int is_channel_narrow(const struct iwl3945_channel_info *ch_info) -{ - return (ch_info->flags & EEPROM_CHANNEL_NARROW) ? 1 : 0; -} - static inline int is_channel_radar(const struct iwl3945_channel_info *ch_info) { return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index 1a66b508a8e..29749e2a8ff 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -62,13 +62,18 @@ *****************************************************************************/ /* * Please use this file (iwl-4965-hw.h) only for hardware-related definitions. - * Use iwl-4965-commands.h for uCode API definitions. - * Use iwl-4965.h for driver implementation definitions. + * Use iwl-commands.h for uCode API definitions. + * Use iwl-dev.h for driver implementation definitions. */ #ifndef __iwl_4965_hw_h__ #define __iwl_4965_hw_h__ +#include "iwl-fh.h" + +/* EERPROM */ +#define IWL4965_EEPROM_IMG_SIZE 1024 + /* * uCode queue management definitions ... * Queue #4 is the command queue for 3945 and 4965; map it to Tx FIFO chnl 4. @@ -93,7 +98,7 @@ #define IWL_RSSI_OFFSET 44 -#include "iwl-4965-commands.h" +#include "iwl-commands.h" #define PCI_LINK_CTRL 0x0F0 #define PCI_POWER_SOURCE 0x0C8 @@ -131,10 +136,8 @@ #define RTC_DATA_LOWER_BOUND (0x800000) #define IWL49_RTC_DATA_UPPER_BOUND (0x80A000) -#define IWL49_RTC_INST_SIZE \ - (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) -#define IWL49_RTC_DATA_SIZE \ - (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) +#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) +#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) #define IWL_MAX_INST_SIZE IWL49_RTC_INST_SIZE #define IWL_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE @@ -785,579 +788,13 @@ enum { /********************* END TXPOWER *****************************************/ -/****************************/ -/* Flow Handler Definitions */ -/****************************/ - -/** - * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) - * Addresses are offsets from device's PCI hardware base address. - */ -#define FH_MEM_LOWER_BOUND (0x1000) -#define FH_MEM_UPPER_BOUND (0x1EF0) - -/** - * Keep-Warm (KW) buffer base address. - * - * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the - * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency - * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host - * from going into a power-savings mode that would cause higher DRAM latency, - * and possible data over/under-runs, before all Tx/Rx is complete. - * - * Driver loads IWL_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) - * of the buffer, which must be 4K aligned. Once this is set up, the 4965 - * automatically invokes keep-warm accesses when normal accesses might not - * be sufficient to maintain fast DRAM response. - * - * Bit fields: - * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned - */ -#define IWL_FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) - - -/** - * TFD Circular Buffers Base (CBBC) addresses - * - * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident - * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) - * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 - * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte - * aligned (address bits 0-7 must be 0). - * - * Bit fields in each pointer register: - * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned - */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) - -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) - - -/** - * Rx SRAM Control and Status Registers (RSCSR) - * - * These registers provide handshake between driver and 4965 for the Rx queue - * (this queue handles *all* command responses, notifications, Rx data, etc. - * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx - * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can - * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer - * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 - * mapping between RBDs and RBs. - * - * Driver must allocate host DRAM memory for the following, and set the - * physical address of each into 4965 registers: - * - * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 - * entries (although any power of 2, up to 4096, is selectable by driver). - * Each entry (1 dword) points to a receive buffer (RB) of consistent size - * (typically 4K, although 8K or 16K are also selectable by driver). - * Driver sets up RB size and number of RBDs in the CB via Rx config - * register FH_MEM_RCSR_CHNL0_CONFIG_REG. - * - * Bit fields within one RBD: - * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned - * - * Driver sets physical address [35:8] of base of RBD circular buffer - * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. - * - * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers - * (RBs) have been filled, via a "write pointer", actually the index of - * the RB's corresponding RBD within the circular buffer. Driver sets - * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. - * - * Bit fields in lower dword of Rx status buffer (upper dword not used - * by driver; see struct iwl4965_shared, val0): - * 31-12: Not used by driver - * 11- 0: Index of last filled Rx buffer descriptor - * (4965 writes, driver reads this value) - * - * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must - * enter pointers to these RBs into contiguous RBD circular buffer entries, - * and update the 4965's "write" index register, FH_RSCSR_CHNL0_RBDCB_WPTR_REG. - * - * This "write" index corresponds to the *next* RBD that the driver will make - * available, i.e. one RBD past the tail of the ready-to-fill RBDs within - * the circular buffer. This value should initially be 0 (before preparing any - * RBs), should be 8 after preparing the first 8 RBs (for example), and must - * wrap back to 0 at the end of the circular buffer (but don't wrap before - * "read" index has advanced past 1! See below). - * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. - * - * As the 4965 fills RBs (referenced from contiguous RBDs within the circular - * buffer), it updates the Rx status buffer in host DRAM, 2) described above, - * to tell the driver the index of the latest filled RBD. The driver must - * read this "read" index from DRAM after receiving an Rx interrupt from 4965. - * - * The driver must also internally keep track of a third index, which is the - * next RBD to process. When receiving an Rx interrupt, driver should process - * all filled but unprocessed RBs up to, but not including, the RB - * corresponding to the "read" index. For example, if "read" index becomes "1", - * driver may process the RB pointed to by RBD 0. Depending on volume of - * traffic, there may be many RBs to process. - * - * If read index == write index, 4965 thinks there is no room to put new data. - * Due to this, the maximum number of filled RBs is 255, instead of 256. To - * be safe, make sure that there is a gap of at least 2 RBDs between "write" - * and "read" indexes; that is, make sure that there are no more than 254 - * buffers waiting to be filled. - */ -#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) -#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) - -/** - * Physical base address of 8-byte Rx Status buffer. - * Bit fields: - * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. - */ -#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) - -/** - * Physical base address of Rx Buffer Descriptor Circular Buffer. - * Bit fields: - * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. - */ -#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) - -/** - * Rx write pointer (index, really!). - * Bit fields: - * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. - * NOTE: For 256-entry circular buffer, use only bits [7:0]. - */ -#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) -#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) - - -/** - * Rx Config/Status Registers (RCSR) - * Rx Config Reg for channel 0 (only channel used) - * - * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for - * normal operation (see bit fields). - * - * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. - * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for - * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. - * - * Bit fields: - * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29-24: reserved - * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), - * min "5" for 32 RBDs, max "12" for 4096 RBDs. - * 19-18: reserved - * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, - * '10' 12K, '11' 16K. - * 15-14: reserved - * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) - * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) - * typical value 0x10 (about 1/2 msec) - * 3- 0: reserved - */ -#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) -#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) - -#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) - -#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MASK (0x00000FF0) /* bit 4-11 */ -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MASK (0x00001000) /* bit 12 */ -#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MASK (0x00008000) /* bit 15 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MASK (0x00030000) /* bits 16-17 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MASK (0x00F00000) /* bits 20-23 */ -#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MASK (0xC0000000) /* bits 30-31 */ - -#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20) -#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4) -#define RX_RB_TIMEOUT (0x10) - -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) - -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) - -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) - - -/** - * Rx Shared Status Registers (RSSR) - * - * After stopping Rx DMA channel (writing 0 to FH_MEM_RCSR_CHNL0_CONFIG_REG), - * driver must poll FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. - * - * Bit fields: - * 24: 1 = Channel 0 is idle - * - * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV contain - * default values that should not be altered by the driver. - */ -#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) -#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) - -#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) -#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) -#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV (FH_MEM_RSSR_LOWER_BOUND + 0x008) - -#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) - - -/** - * Transmit DMA Channel Control/Status Registers (TCSR) - * - * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels - * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, - * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. - * - * To use a Tx DMA channel, driver must initialize its - * IWL_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: - * - * IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - * IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL - * - * All other bits should be 0. - * - * Bit fields: - * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29- 4: Reserved, set to "0" - * 3: Enable internal DMA requests (1, normal operation), disable (0) - * 2- 0: Reserved, set to "0" - */ -#define IWL_FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) -#define IWL_FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) - -/* Find Control/Status reg for given Tx DMA/FIFO channel */ -#define IWL_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ - (IWL_FH_TCSR_LOWER_BOUND + 0x20 * _chnl) - -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008) - -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) -#define IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) - -/** - * Tx Shared Status Registers (TSSR) - * - * After stopping Tx DMA channel (writing 0 to - * IWL_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll - * IWL_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle - * (channel's buffers empty | no pending requests). - * - * Bit fields: - * 31-24: 1 = Channel buffers empty (channel 7:0) - * 23-16: 1 = No pending requests (channel 7:0) - */ -#define IWL_FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) -#define IWL_FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) - -#define IWL_FH_TSSR_TX_STATUS_REG (IWL_FH_TSSR_LOWER_BOUND + 0x010) - -#define IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) \ - ((1 << (_chnl)) << 24) -#define IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) \ - ((1 << (_chnl)) << 16) - -#define IWL_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \ - (IWL_FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ - IWL_FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) - - -/********************* START TX SCHEDULER *************************************/ - -/** - * 4965 Tx Scheduler - * - * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs - * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in - * host DRAM. It steers each frame's Tx command (which contains the frame - * data) into one of up to 7 prioritized Tx DMA FIFO channels within the - * device. A queue maps to only one (selectable by driver) Tx DMA channel, - * but one DMA channel may take input from several queues. - * - * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: - * - * 0 -- EDCA BK (background) frames, lowest priority - * 1 -- EDCA BE (best effort) frames, normal priority - * 2 -- EDCA VI (video) frames, higher priority - * 3 -- EDCA VO (voice) and management frames, highest priority - * 4 -- Commands (e.g. RXON, etc.) - * 5 -- HCCA short frames - * 6 -- HCCA long frames - * 7 -- not used by driver (device-internal only) - * - * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to - * support 11n aggregation via EDCA DMA channels. - * - * The driver sets up each queue to work in one of two modes: - * - * 1) Scheduler-Ack, in which the scheduler automatically supports a - * block-ack (BA) window of up to 64 TFDs. In this mode, each queue - * contains TFDs for a unique combination of Recipient Address (RA) - * and Traffic Identifier (TID), that is, traffic of a given - * Quality-Of-Service (QOS) priority, destined for a single station. - * - * In scheduler-ack mode, the scheduler keeps track of the Tx status of - * each frame within the BA window, including whether it's been transmitted, - * and whether it's been acknowledged by the receiving station. The device - * automatically processes block-acks received from the receiving STA, - * and reschedules un-acked frames to be retransmitted (successful - * Tx completion may end up being out-of-order). - * - * The driver must maintain the queue's Byte Count table in host DRAM - * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. - * This mode does not support fragmentation. - * - * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. - * The device may automatically retry Tx, but will retry only one frame - * at a time, until receiving ACK from receiving station, or reaching - * retry limit and giving up. - * - * The command queue (#4) must use this mode! - * This mode does not require use of the Byte Count table in host DRAM. - * - * Driver controls scheduler operation via 3 means: - * 1) Scheduler registers - * 2) Shared scheduler data base in internal 4956 SRAM - * 3) Shared data in host DRAM - * - * Initialization: - * - * When loading, driver should allocate memory for: - * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. - * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory - * (1024 bytes for each queue). - * - * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4, the command queue, otherwise - * the driver can't issue commands!): - */ - -/** - * Max Tx window size is the max number of contiguous TFDs that the scheduler - * can keep track of at one time when creating block-ack chains of frames. - * Note that "64" matches the number of ack bits in a block-ack packet. - * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize - * SCD_CONTEXT_QUEUE_OFFSET(x) values. - */ -#define SCD_WIN_SIZE 64 -#define SCD_FRAME_LIMIT 64 - -/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ -#define SCD_START_OFFSET 0xa02c00 - -/* - * 4965 tells driver SRAM address for internal scheduler structs via this reg. - * Value is valid only after "Alive" response from uCode. - */ -#define SCD_SRAM_BASE_ADDR (SCD_START_OFFSET + 0x0) - -/* - * Driver may need to update queue-empty bits after changing queue's - * write and read pointers (indexes) during (re-)initialization (i.e. when - * scheduler is not tracking what's happening). - * Bit fields: - * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit - * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty - * NOTE: This register is not used by Linux driver. - */ -#define SCD_EMPTY_BITS (SCD_START_OFFSET + 0x4) - -/* - * Physical base address of array of byte count (BC) circular buffers (CBs). - * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. - * This register points to BC CB for queue 0, must be on 1024-byte boundary. - * Others are spaced by 1024 bytes. - * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. - * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). - * Bit fields: - * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. - */ -#define SCD_DRAM_BASE_ADDR (SCD_START_OFFSET + 0x10) - -/* - * Enables any/all Tx DMA/FIFO channels. - * Scheduler generates requests for only the active channels. - * Set this to 0xff to enable all 8 channels (normal usage). - * Bit fields: - * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 - */ -#define SCD_TXFACT (SCD_START_OFFSET + 0x1c) - -/* Mask to enable contiguous Tx DMA/FIFO channels between "lo" and "hi". */ -#define SCD_TXFACT_REG_TXFIFO_MASK(lo, hi) \ - ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -/* - * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. - * Initialized and updated by driver as new TFDs are added to queue. - * NOTE: If using Block Ack, index must correspond to frame's - * Start Sequence Number; index = (SSN & 0xff) - * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? - */ -#define SCD_QUEUE_WRPTR(x) (SCD_START_OFFSET + 0x24 + (x) * 4) - -/* - * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. - * For FIFO mode, index indicates next frame to transmit. - * For Scheduler-ACK mode, index indicates first frame in Tx window. - * Initialized by driver, updated by scheduler. - */ -#define SCD_QUEUE_RDPTR(x) (SCD_START_OFFSET + 0x64 + (x) * 4) - -/* - * Select which queues work in chain mode (1) vs. not (0). - * Use chain mode to build chains of aggregated frames. - * Bit fields: - * 31-16: Reserved - * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time - * NOTE: If driver sets up queue for chain mode, it should be also set up - * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). - */ -#define SCD_QUEUECHAIN_SEL (SCD_START_OFFSET + 0xd0) - -/* - * Select which queues interrupt driver when scheduler increments - * a queue's read pointer (index). - * Bit fields: - * 31-16: Reserved - * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled - * NOTE: This functionality is apparently a no-op; driver relies on interrupts - * from Rx queue to read Tx command responses and update Tx queues. - */ -#define SCD_INTERRUPT_MASK (SCD_START_OFFSET + 0xe4) - -/* - * Queue search status registers. One for each queue. - * Sets up queue mode and assigns queue to Tx DMA channel. - * Bit fields: - * 19-10: Write mask/enable bits for bits 0-9 - * 9: Driver should init to "0" - * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). - * Driver should init to "1" for aggregation mode, or "0" otherwise. - * 7-6: Driver should init to "0" - * 5: Window Size Left; indicates whether scheduler can request - * another TFD, based on window size, etc. Driver should init - * this bit to "1" for aggregation mode, or "0" for non-agg. - * 4-1: Tx FIFO to use (range 0-7). - * 0: Queue is active (1), not active (0). - * Other bits should be written as "0" - * - * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled - * via SCD_QUEUECHAIN_SEL. - */ -#define SCD_QUEUE_STATUS_BITS(x) (SCD_START_OFFSET + 0x104 + (x) * 4) - -/* Bit field positions */ -#define SCD_QUEUE_STTS_REG_POS_ACTIVE (0) -#define SCD_QUEUE_STTS_REG_POS_TXF (1) -#define SCD_QUEUE_STTS_REG_POS_WSL (5) -#define SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) - -/* Write masks */ -#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) -#define SCD_QUEUE_STTS_REG_MSK (0x0007FC00) - -/** - * 4965 internal SRAM structures for scheduler, shared with driver ... - * - * Driver should clear and initialize the following areas after receiving - * "Alive" response from 4965 uCode, i.e. after initial - * uCode load, or after a uCode load done for error recovery: - * - * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) - * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) - * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) - * - * Driver accesses SRAM via HBUS_TARG_MEM_* registers. - * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. - * All OFFSET values must be added to this base address. - */ - -/* - * Queue context. One 8-byte entry for each of 16 queues. - * - * Driver should clear this entire area (size 0x80) to 0 after receiving - * "Alive" notification from uCode. Additionally, driver should init - * each queue's entry as follows: - * - * LS Dword bit fields: - * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. - * - * MS Dword bit fields: - * 16-22: Frame limit. Driver should init to 10 (0xa). - * - * Driver should init all other bits to 0. - * - * Init must be done after driver receives "Alive" response from 4965 uCode, - * and when setting up queue for aggregation. - */ -#define SCD_CONTEXT_DATA_OFFSET 0x380 -#define SCD_CONTEXT_QUEUE_OFFSET(x) (SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) - -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) -#define SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) - -/* - * Tx Status Bitmap - * - * Driver should clear this entire area (size 0x100) to 0 after receiving - * "Alive" notification from uCode. Area is used only by device itself; - * no other support (besides clearing) is required from driver. - */ -#define SCD_TX_STTS_BITMAP_OFFSET 0x400 - -/* - * RAxTID to queue translation mapping. - * - * When queue is in Scheduler-ACK mode, frames placed in a that queue must be - * for only one combination of receiver address (RA) and traffic ID (TID), i.e. - * one QOS priority level destined for one station (for this wireless link, - * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit - * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK - * mode, the device ignores the mapping value. - * - * Bit fields, for each 16-bit map: - * 15-9: Reserved, set to 0 - * 8-4: Index into device's station table for recipient station - * 3-0: Traffic ID (tid), range 0-15 - * - * Driver should clear this entire area (size 32 bytes) to 0 after receiving - * "Alive" notification from uCode. To update a 16-bit map value, driver - * must read a dword-aligned value from device SRAM, replace the 16-bit map - * value of interest, and write the dword value back into device SRAM. - */ -#define SCD_TRANSLATE_TBL_OFFSET 0x500 - -/* Find translation table dword to read/write for given queue */ -#define SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ - ((SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) - -#define SCD_TXFIFO_POS_TID (0) -#define SCD_TXFIFO_POS_RA (4) -#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) - -/*********************** END TX SCHEDULER *************************************/ - static inline u8 iwl4965_hw_get_rate(__le32 rate_n_flags) { return le32_to_cpu(rate_n_flags) & 0xFF; } -static inline u16 iwl4965_hw_get_rate_n_flags(__le32 rate_n_flags) +static inline u32 iwl4965_hw_get_rate_n_flags(__le32 rate_n_flags) { - return le32_to_cpu(rate_n_flags) & 0xFFFF; + return le32_to_cpu(rate_n_flags) & 0x1FFFF; } static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) { @@ -1385,11 +822,11 @@ static inline __le32 iwl4965_hw_set_rate_n_flags(u8 rate, u16 flags) * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array * in DRAM containing 256 Transmit Frame Descriptors (TFDs). */ -#define IWL4965_MAX_WIN_SIZE 64 -#define IWL4965_QUEUE_SIZE 256 -#define IWL4965_NUM_FIFOS 7 -#define IWL4965_MAX_NUM_QUEUES 16 - +#define IWL49_MAX_WIN_SIZE 64 +#define IWL49_QUEUE_SIZE 256 +#define IWL49_NUM_FIFOS 7 +#define IWL49_CMD_FIFO_NUM 4 +#define IWL49_NUM_QUEUES 16 /** * struct iwl4965_tfd_frame_data @@ -1520,10 +957,10 @@ struct iwl4965_queue_byte_cnt_entry { * 4965 assumes tables are separated by 1024 bytes. */ struct iwl4965_sched_queue_byte_cnt_tbl { - struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL4965_QUEUE_SIZE + - IWL4965_MAX_WIN_SIZE]; + struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL49_QUEUE_SIZE + + IWL49_MAX_WIN_SIZE]; u8 dont_care[1024 - - (IWL4965_QUEUE_SIZE + IWL4965_MAX_WIN_SIZE) * + (IWL49_QUEUE_SIZE + IWL49_MAX_WIN_SIZE) * sizeof(__le16)]; } __attribute__ ((packed)); @@ -1553,7 +990,7 @@ struct iwl4965_sched_queue_byte_cnt_tbl { */ struct iwl4965_shared { struct iwl4965_sched_queue_byte_cnt_tbl - queues_byte_cnt_tbls[IWL4965_MAX_NUM_QUEUES]; + queues_byte_cnt_tbls[IWL49_NUM_QUEUES]; __le32 rb_closed; /* __le32 rb_closed_stts_rb_num:12; */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index c9847b1a67f..24dee00b0e8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -28,7 +28,6 @@ #include <linux/skbuff.h> #include <linux/wireless.h> #include <net/mac80211.h> -#include <net/ieee80211.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -38,13 +37,13 @@ #include "../net/mac80211/rate.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-helpers.h" #define RS_NAME "iwl-4965-rs" -#define NUM_TRY_BEFORE_ANTENNA_TOGGLE 1 +#define NUM_TRY_BEFORE_ANT_TOGGLE 1 #define IWL_NUMBER_TRY 1 #define IWL_HT_NUMBER_TRY 3 @@ -65,9 +64,16 @@ static u8 rs_ht_to_legacy[] = { IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX }; -struct iwl4965_rate { - u32 rate_n_flags; -} __attribute__ ((packed)); +static const u8 ant_toggle_lookup[] = { + /*ANT_NONE -> */ ANT_NONE, + /*ANT_A -> */ ANT_B, + /*ANT_B -> */ ANT_C, + /*ANT_AB -> */ ANT_BC, + /*ANT_C -> */ ANT_A, + /*ANT_AC -> */ ANT_AB, + /*ANT_BC -> */ ANT_AC, + /*ANT_ABC -> */ ANT_ABC, +}; /** * struct iwl4965_rate_scale_data -- tx success history for one rate @@ -88,14 +94,14 @@ struct iwl4965_rate_scale_data { * one for "active", and one for "search". */ struct iwl4965_scale_tbl_info { - enum iwl4965_table_type lq_type; - enum iwl4965_antenna_type antenna_type; + enum iwl_table_type lq_type; + u8 ant_type; u8 is_SGI; /* 1 = short guard interval */ u8 is_fat; /* 1 = 40 MHz channel width */ u8 is_dup; /* 1 = duplicated data streams */ u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ - struct iwl4965_rate current_rate; /* rate_n_flags, uCode API format */ + u32 current_rate; /* rate_n_flags, uCode API format */ struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ }; @@ -136,8 +142,6 @@ struct iwl4965_lq_sta { u32 flush_timer; /* time staying in mode before new search */ u8 action_counter; /* # mode-switch actions tried */ - u8 antenna; - u8 valid_antenna; u8 is_green; u8 is_dup; enum ieee80211_band band; @@ -145,9 +149,10 @@ struct iwl4965_lq_sta { /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ u32 supp_rates; - u16 active_rate; + u16 active_legacy_rate; u16 active_siso_rate; - u16 active_mimo_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; u16 active_rate_basic; struct iwl_link_quality_cmd lq; @@ -162,7 +167,7 @@ struct iwl4965_lq_sta { #ifdef CONFIG_IWL4965_HT struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; #endif - struct iwl4965_rate dbg_fixed; + u32 dbg_fixed_rate; #endif struct iwl_priv *drv; }; @@ -171,17 +176,17 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, struct net_device *dev, struct ieee80211_hdr *hdr, struct sta_info *sta); -static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *tx_mcs, - struct iwl_link_quality_cmd *tbl); +static void rs_fill_link_cmd(const struct iwl_priv *priv, + struct iwl4965_lq_sta *lq_sta, + u32 rate_n_flags); #ifdef CONFIG_MAC80211_DEBUGFS static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *mcs, int index); + u32 *rate_n_flags, int index); #else static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *mcs, int index) + u32 *rate_n_flags, int index) {} #endif @@ -190,6 +195,7 @@ static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits * "G" is the only table that supports CCK (the first 4 rates). */ +/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/ static s32 expected_tpt_A[IWL_RATE_COUNT] = { 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 }; @@ -230,7 +236,7 @@ static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = { 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293 }; -static inline u8 iwl4965_rate_get_rate(u32 rate_n_flags) +static inline u8 rs_extract_rate(u32 rate_n_flags) { return (u8)(rate_n_flags & 0xFF); } @@ -245,6 +251,11 @@ static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window) window->stamp = 0; } +static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) +{ + return ((ant_type & valid_antenna) == ant_type); +} + #ifdef CONFIG_IWL4965_HT /* * removes the old data from the statistics. All data that is older than @@ -374,6 +385,13 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, #endif /* CONFIG_IWLWIFI_HT */ +static inline int get_num_of_ant_from_rate(u32 rate_n_flags) +{ + return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK)); +} + /** * rs_collect_tx_data - Update the success/failure sliding window * @@ -386,8 +404,7 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, int successes) { struct iwl4965_rate_scale_data *window = NULL; - u64 mask; - u8 win_size = IWL_RATE_MAX_WINDOW; + static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); s32 fail_count; if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) @@ -405,14 +422,14 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, * we keep these bitmaps!). */ while (retries > 0) { - if (window->counter >= win_size) { - window->counter = win_size - 1; - mask = 1; - mask = (mask << (win_size - 1)); + if (window->counter >= IWL_RATE_MAX_WINDOW) { + + /* remove earliest */ + window->counter = IWL_RATE_MAX_WINDOW - 1; + if (window->data & mask) { window->data &= ~mask; - window->success_counter = - window->success_counter - 1; + window->success_counter--; } } @@ -422,10 +439,9 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, /* Shift bitmap by one frame (throw away oldest history), * OR in "1", and increment "success" if this * frame was successful. */ - mask = window->data; - window->data = (mask << 1); + window->data <<= 1;; if (successes > 0) { - window->success_counter = window->success_counter + 1; + window->success_counter++; window->data |= 0x1; successes--; } @@ -458,170 +474,166 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, /* * Fill uCode API rate_n_flags field, based on "search" or "active" table. */ -static void rs_mcs_from_tbl(struct iwl4965_rate *mcs_rate, - struct iwl4965_scale_tbl_info *tbl, - int index, u8 use_green) +/* FIXME:RS:remove this function and put the flags statically in the table */ +static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl, + int index, u8 use_green) { + u32 rate_n_flags = 0; + if (is_legacy(tbl->lq_type)) { - mcs_rate->rate_n_flags = iwl4965_rates[index].plcp; + rate_n_flags = iwl4965_rates[index].plcp; if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) - mcs_rate->rate_n_flags |= RATE_MCS_CCK_MSK; + rate_n_flags |= RATE_MCS_CCK_MSK; - } else if (is_siso(tbl->lq_type)) { - if (index > IWL_LAST_OFDM_RATE) - index = IWL_LAST_OFDM_RATE; - mcs_rate->rate_n_flags = iwl4965_rates[index].plcp_siso | - RATE_MCS_HT_MSK; - } else { - if (index > IWL_LAST_OFDM_RATE) + } else if (is_Ht(tbl->lq_type)) { + if (index > IWL_LAST_OFDM_RATE) { + IWL_ERROR("invalid HT rate index %d\n", index); index = IWL_LAST_OFDM_RATE; - mcs_rate->rate_n_flags = iwl4965_rates[index].plcp_mimo | - RATE_MCS_HT_MSK; - } - - switch (tbl->antenna_type) { - case ANT_BOTH: - mcs_rate->rate_n_flags |= RATE_MCS_ANT_AB_MSK; - break; - case ANT_MAIN: - mcs_rate->rate_n_flags |= RATE_MCS_ANT_A_MSK; - break; - case ANT_AUX: - mcs_rate->rate_n_flags |= RATE_MCS_ANT_B_MSK; - break; - case ANT_NONE: - break; - } - - if (is_legacy(tbl->lq_type)) - return; + } + rate_n_flags = RATE_MCS_HT_MSK; - if (tbl->is_fat) { - if (tbl->is_dup) - mcs_rate->rate_n_flags |= RATE_MCS_DUP_MSK; + if (is_siso(tbl->lq_type)) + rate_n_flags |= iwl4965_rates[index].plcp_siso; + else if (is_mimo2(tbl->lq_type)) + rate_n_flags |= iwl4965_rates[index].plcp_mimo2; else - mcs_rate->rate_n_flags |= RATE_MCS_FAT_MSK; + rate_n_flags |= iwl4965_rates[index].plcp_mimo3; + } else { + IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type); } - if (tbl->is_SGI) - mcs_rate->rate_n_flags |= RATE_MCS_SGI_MSK; - if (use_green) { - mcs_rate->rate_n_flags |= RATE_MCS_GF_MSK; - if (is_siso(tbl->lq_type)) - mcs_rate->rate_n_flags &= ~RATE_MCS_SGI_MSK; + rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & + RATE_MCS_ANT_ABC_MSK); + + if (is_Ht(tbl->lq_type)) { + if (tbl->is_fat) { + if (tbl->is_dup) + rate_n_flags |= RATE_MCS_DUP_MSK; + else + rate_n_flags |= RATE_MCS_FAT_MSK; + } + if (tbl->is_SGI) + rate_n_flags |= RATE_MCS_SGI_MSK; + + if (use_green) { + rate_n_flags |= RATE_MCS_GF_MSK; + if (is_siso(tbl->lq_type) && tbl->is_SGI) { + rate_n_flags &= ~RATE_MCS_SGI_MSK; + IWL_ERROR("GF was set with SGI:SISO\n"); + } + } } + return rate_n_flags; } /* * Interpret uCode API's rate_n_flags format, * fill "search" or "active" tx mode table. */ -static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate, +static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, enum ieee80211_band band, struct iwl4965_scale_tbl_info *tbl, int *rate_idx) { - int index; - u32 ant_msk; + u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); + u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); + u8 mcs; - index = iwl4965_hwrate_to_plcp_idx(mcs_rate->rate_n_flags); + *rate_idx = iwl4965_hwrate_to_plcp_idx(rate_n_flags); - if (index == IWL_RATE_INVALID) { + if (*rate_idx == IWL_RATE_INVALID) { *rate_idx = -1; return -EINVAL; } tbl->is_SGI = 0; /* default legacy setup */ tbl->is_fat = 0; tbl->is_dup = 0; - tbl->antenna_type = ANT_BOTH; /* default MIMO setup */ + tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); + tbl->lq_type = LQ_NONE; /* legacy rate format */ - if (!(mcs_rate->rate_n_flags & RATE_MCS_HT_MSK)) { - ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK); - - if (ant_msk == RATE_MCS_ANT_AB_MSK) - tbl->lq_type = LQ_NONE; - else { - + if (!(rate_n_flags & RATE_MCS_HT_MSK)) { + if (num_of_ant == 1) { if (band == IEEE80211_BAND_5GHZ) tbl->lq_type = LQ_A; else tbl->lq_type = LQ_G; - - if (mcs_rate->rate_n_flags & RATE_MCS_ANT_A_MSK) - tbl->antenna_type = ANT_MAIN; - else - tbl->antenna_type = ANT_AUX; } - *rate_idx = index; - - /* HT rate format, SISO (might be 20 MHz legacy or 40 MHz fat width) */ - } else if (iwl4965_rate_get_rate(mcs_rate->rate_n_flags) - <= IWL_RATE_SISO_60M_PLCP) { - tbl->lq_type = LQ_SISO; - - ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK); - if (ant_msk == RATE_MCS_ANT_AB_MSK) - tbl->lq_type = LQ_NONE; - else { - if (mcs_rate->rate_n_flags & RATE_MCS_ANT_A_MSK) - tbl->antenna_type = ANT_MAIN; - else - tbl->antenna_type = ANT_AUX; - } - if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((mcs_rate->rate_n_flags & RATE_MCS_FAT_MSK) || - (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_fat = 1; - - if (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - - *rate_idx = index; - - /* HT rate format, MIMO (might be 20 MHz legacy or 40 MHz fat width) */ + /* HT rate format */ } else { - tbl->lq_type = LQ_MIMO; - if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK) + if (rate_n_flags & RATE_MCS_SGI_MSK) tbl->is_SGI = 1; - if ((mcs_rate->rate_n_flags & RATE_MCS_FAT_MSK) || - (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK)) + if ((rate_n_flags & RATE_MCS_FAT_MSK) || + (rate_n_flags & RATE_MCS_DUP_MSK)) tbl->is_fat = 1; - if (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK) + if (rate_n_flags & RATE_MCS_DUP_MSK) tbl->is_dup = 1; - *rate_idx = index; + + mcs = rs_extract_rate(rate_n_flags); + + /* SISO */ + if (mcs <= IWL_RATE_SISO_60M_PLCP) { + if (num_of_ant == 1) + tbl->lq_type = LQ_SISO; /*else NONE*/ + /* MIMO2 */ + } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { + if (num_of_ant == 2) + tbl->lq_type = LQ_MIMO2; + /* MIMO3 */ + } else { + if (num_of_ant == 3) + tbl->lq_type = LQ_MIMO3; + } } return 0; } -static inline void rs_toggle_antenna(struct iwl4965_rate *new_rate, - struct iwl4965_scale_tbl_info *tbl) +/* switch to another antenna/antennas and return 1 */ +/* if no other valid antenna found, return 0 */ +static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, + struct iwl4965_scale_tbl_info *tbl) { - if (tbl->antenna_type == ANT_AUX) { - tbl->antenna_type = ANT_MAIN; - new_rate->rate_n_flags &= ~RATE_MCS_ANT_B_MSK; - new_rate->rate_n_flags |= RATE_MCS_ANT_A_MSK; - } else { - tbl->antenna_type = ANT_AUX; - new_rate->rate_n_flags &= ~RATE_MCS_ANT_A_MSK; - new_rate->rate_n_flags |= RATE_MCS_ANT_B_MSK; - } + u8 new_ant_type; + + if (!tbl->ant_type || tbl->ant_type > ANT_ABC) + return 0; + + if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) + return 0; + + new_ant_type = ant_toggle_lookup[tbl->ant_type]; + + while ((new_ant_type != tbl->ant_type) && + !rs_is_valid_ant(valid_ant, new_ant_type)) + new_ant_type = ant_toggle_lookup[new_ant_type]; + + if (new_ant_type == tbl->ant_type) + return 0; + + tbl->ant_type = new_ant_type; + *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; + *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; + return 1; } -static inline u8 rs_use_green(struct iwl_priv *priv, - struct ieee80211_conf *conf) +/* FIXME:RS: in 4965 we don't use greenfield at all */ +/* FIXME:RS: don't use greenfield for now in TX */ +/* #ifdef CONFIG_IWL4965_HT */ +#if 0 +static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) { -#ifdef CONFIG_IWL4965_HT return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && priv->current_ht_config.is_green_field && !priv->current_ht_config.non_GF_STA_present); -#endif /* CONFIG_IWL4965_HT */ +} +#else +static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) +{ return 0; } +#endif /* CONFIG_IWL4965_HT */ /** * rs_get_supported_rates - get the available rates @@ -630,23 +642,23 @@ static inline u8 rs_use_green(struct iwl_priv *priv, * basic available rates. * */ -static void rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta, +static u16 rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta, struct ieee80211_hdr *hdr, - enum iwl4965_table_type rate_type, - u16 *data_rate) + enum iwl_table_type rate_type) { - if (is_legacy(rate_type)) - *data_rate = lq_sta->active_rate; - else { + if (hdr && is_multicast_ether_addr(hdr->addr1) && + lq_sta->active_rate_basic) + return lq_sta->active_rate_basic; + + if (is_legacy(rate_type)) { + return lq_sta->active_legacy_rate; + } else { if (is_siso(rate_type)) - *data_rate = lq_sta->active_siso_rate; + return lq_sta->active_siso_rate; + else if (is_mimo2(rate_type)) + return lq_sta->active_mimo2_rate; else - *data_rate = lq_sta->active_mimo_rate; - } - - if (hdr && is_multicast_ether_addr(hdr->addr1) && - lq_sta->active_rate_basic) { - *data_rate = lq_sta->active_rate_basic; + return lq_sta->active_mimo3_rate; } } @@ -705,9 +717,9 @@ static u16 rs_get_adjacent_rate(u8 index, u16 rate_mask, int rate_type) return (high << 8) | low; } -static void rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, +static u32 rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, struct iwl4965_scale_tbl_info *tbl, u8 scale_index, - u8 ht_possible, struct iwl4965_rate *mcs_rate) + u8 ht_possible) { s32 low; u16 rate_mask; @@ -726,15 +738,14 @@ static void rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, else tbl->lq_type = LQ_G; - if ((tbl->antenna_type == ANT_BOTH) || - (tbl->antenna_type == ANT_NONE)) - tbl->antenna_type = ANT_MAIN; + if (num_of_ant(tbl->ant_type) > 1) + tbl->ant_type = ANT_A;/*FIXME:RS*/ tbl->is_fat = 0; tbl->is_SGI = 0; } - rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, &rate_mask); + rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); /* Mask with station rate restriction */ if (is_legacy(tbl->lq_type)) { @@ -748,17 +759,18 @@ static void rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, /* If we switched from HT to legacy, check current rate */ if (switch_to_legacy && (rate_mask & (1 << scale_index))) { - rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green); - return; + low = scale_index; + goto out; } high_low = rs_get_adjacent_rate(scale_index, rate_mask, tbl->lq_type); low = high_low & 0xff; - if (low != IWL_RATE_INVALID) - rs_mcs_from_tbl(mcs_rate, tbl, low, is_green); - else - rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green); + if (low == IWL_RATE_INVALID) + low = scale_index; + +out: + return rate_n_flags_from_tbl(tbl, low, is_green); } /* @@ -780,7 +792,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, struct ieee80211_hw *hw = local_to_hw(local); struct iwl4965_rate_scale_data *window = NULL; struct iwl4965_rate_scale_data *search_win = NULL; - struct iwl4965_rate tx_mcs; + u32 tx_rate; struct iwl4965_scale_tbl_info tbl_type; struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl; u8 active_index = 0; @@ -822,15 +834,6 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, table = &lq_sta->lq; active_index = lq_sta->active_tbl; - /* Get mac80211 antenna info */ - lq_sta->antenna = - (lq_sta->valid_antenna & local->hw.conf.antenna_sel_tx); - if (!lq_sta->antenna) - lq_sta->antenna = lq_sta->valid_antenna; - - /* Ignore mac80211 antenna info for now */ - lq_sta->antenna = lq_sta->valid_antenna; - curr_tbl = &(lq_sta->lq_info[active_index]); search_tbl = &(lq_sta->lq_info[(1 - active_index)]); window = (struct iwl4965_rate_scale_data *) @@ -846,8 +849,8 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, * to check "search" mode, or a prior "search" mode after we've moved * to a new "search" mode (which might become the new "active" mode). */ - tx_mcs.rate_n_flags = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(&tx_mcs, priv->band, &tbl_type, &rs_index); + tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); if (priv->band == IEEE80211_BAND_5GHZ) rs_index -= IWL_FIRST_OFDM_RATE; @@ -858,16 +861,14 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, !!(tx_resp->control.flags & IEEE80211_TXCTL_40_MHZ_WIDTH)) || (tbl_type.is_dup ^ !!(tx_resp->control.flags & IEEE80211_TXCTL_DUP_DATA)) || - (tbl_type.antenna_type ^ - tx_resp->control.antenna_sel_tx) || - (!!(tx_mcs.rate_n_flags & RATE_MCS_HT_MSK) ^ + (tbl_type.ant_type ^ tx_resp->control.antenna_sel_tx) || + (!!(tx_rate & RATE_MCS_HT_MSK) ^ !!(tx_resp->control.flags & IEEE80211_TXCTL_OFDM_HT)) || - (!!(tx_mcs.rate_n_flags & RATE_MCS_GF_MSK) ^ + (!!(tx_rate & RATE_MCS_GF_MSK) ^ !!(tx_resp->control.flags & IEEE80211_TXCTL_GREEN_FIELD)) || (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != tx_resp->control.tx_rate->bitrate)) { - IWL_DEBUG_RATE("initial rate does not match 0x%x\n", - tx_mcs.rate_n_flags); + IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); goto out; } @@ -875,15 +876,14 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, while (retries) { /* Look up the rate and other info used for each tx attempt. * Each tx attempt steps one entry deeper in the rate table. */ - tx_mcs.rate_n_flags = - le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(&tx_mcs, priv->band, + tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); /* If type matches "search" table, * add failure to "search" history */ if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.antenna_type == search_tbl->antenna_type) && + (tbl_type.ant_type == search_tbl->ant_type) && (tbl_type.is_SGI == search_tbl->is_SGI)) { if (search_tbl->expected_tpt) tpt = search_tbl->expected_tpt[rs_index]; @@ -894,7 +894,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, /* Else if type matches "current/active" table, * add failure to "current/active" history */ } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.antenna_type == curr_tbl->antenna_type) && + (tbl_type.ant_type == curr_tbl->ant_type) && (tbl_type.is_SGI == curr_tbl->is_SGI)) { if (curr_tbl->expected_tpt) tpt = curr_tbl->expected_tpt[rs_index]; @@ -917,8 +917,8 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, * if Tx was successful first try, use original rate, * else look up the rate that was, finally, successful. */ - tx_mcs.rate_n_flags = le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(&tx_mcs, priv->band, &tbl_type, &rs_index); + tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); + rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); /* Update frame history window with "success" if Tx got ACKed ... */ if (tx_resp->flags & IEEE80211_TX_STATUS_ACK) @@ -929,7 +929,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, /* If type matches "search" table, * add final tx status to "search" history */ if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.antenna_type == search_tbl->antenna_type) && + (tbl_type.ant_type == search_tbl->ant_type) && (tbl_type.is_SGI == search_tbl->is_SGI)) { if (search_tbl->expected_tpt) tpt = search_tbl->expected_tpt[rs_index]; @@ -945,7 +945,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, /* Else if type matches "current/active" table, * add final tx status to "current/active" history */ } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.antenna_type == curr_tbl->antenna_type) && + (tbl_type.ant_type == curr_tbl->ant_type) && (tbl_type.is_SGI == curr_tbl->is_SGI)) { if (curr_tbl->expected_tpt) tpt = curr_tbl->expected_tpt[rs_index]; @@ -982,30 +982,6 @@ out: return; } -static u8 rs_is_ant_connected(u8 valid_antenna, - enum iwl4965_antenna_type antenna_type) -{ - if (antenna_type == ANT_AUX) - return ((valid_antenna & 0x2) ? 1:0); - else if (antenna_type == ANT_MAIN) - return ((valid_antenna & 0x1) ? 1:0); - else if (antenna_type == ANT_BOTH) - return ((valid_antenna & 0x3) == 0x3); - - return 1; -} - -static u8 rs_is_other_ant_connected(u8 valid_antenna, - enum iwl4965_antenna_type antenna_type) -{ - if (antenna_type == ANT_AUX) - return rs_is_ant_connected(valid_antenna, ANT_MAIN); - else - return rs_is_ant_connected(valid_antenna, ANT_AUX); - - return 0; -} - /* * Begin a period of staying with a selected modulation mode. * Set "stay_in_tbl" flag to prevent any mode switches. @@ -1017,7 +993,7 @@ static u8 rs_is_other_ant_connected(u8 valid_antenna, static void rs_set_stay_in_table(u8 is_legacy, struct iwl4965_lq_sta *lq_sta) { - IWL_DEBUG_HT("we are staying in the same table\n"); + IWL_DEBUG_RATE("we are staying in the same table\n"); lq_sta->stay_in_tbl = 1; /* only place this gets set */ if (is_legacy) { lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; @@ -1036,7 +1012,7 @@ static void rs_set_stay_in_table(u8 is_legacy, /* * Find correct throughput table for given mode of modulation */ -static void rs_get_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, +static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, struct iwl4965_scale_tbl_info *tbl) { if (is_legacy(tbl->lq_type)) { @@ -1055,7 +1031,7 @@ static void rs_get_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, else tbl->expected_tpt = expected_tpt_siso20MHz; - } else if (is_mimo(tbl->lq_type)) { + } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */ if (tbl->is_fat && !lq_sta->is_dup) if (tbl->is_SGI) tbl->expected_tpt = expected_tpt_mimo40MHzSGI; @@ -1085,7 +1061,7 @@ static void rs_get_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, static s32 rs_get_best_rate(struct iwl_priv *priv, struct iwl4965_lq_sta *lq_sta, struct iwl4965_scale_tbl_info *tbl, /* "search" */ - u16 rate_mask, s8 index, s8 rate) + u16 rate_mask, s8 index) { /* "active" values */ struct iwl4965_scale_tbl_info *active_tbl = @@ -1098,6 +1074,7 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, s32 new_rate, high, low, start_hi; u16 high_low; + s8 rate = index; new_rate = high = low = start_hi = IWL_RATE_INVALID; @@ -1172,21 +1149,16 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, } #endif /* CONFIG_IWL4965_HT */ -static inline u8 rs_is_both_ant_supp(u8 valid_antenna) -{ - return (rs_is_ant_connected(valid_antenna, ANT_BOTH)); -} - /* * Set up search table for MIMO */ -static int rs_switch_to_mimo(struct iwl_priv *priv, +#ifdef CONFIG_IWL4965_HT +static int rs_switch_to_mimo2(struct iwl_priv *priv, struct iwl4965_lq_sta *lq_sta, struct ieee80211_conf *conf, struct sta_info *sta, struct iwl4965_scale_tbl_info *tbl, int index) { -#ifdef CONFIG_IWL4965_HT u16 rate_mask; s32 rate; s8 is_green = lq_sta->is_green; @@ -1195,26 +1167,27 @@ static int rs_switch_to_mimo(struct iwl_priv *priv, !sta->ht_info.ht_supported) return -1; - IWL_DEBUG_HT("LQ: try to switch to MIMO\n"); - tbl->lq_type = LQ_MIMO; - rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, - &rate_mask); - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ - if (!rs_is_both_ant_supp(lq_sta->antenna)) + if (priv->hw_params.tx_chains_num < 2) return -1; + IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n"); + + tbl->lq_type = LQ_MIMO2; tbl->is_dup = lq_sta->is_dup; tbl->action = 0; + rate_mask = lq_sta->active_mimo2_rate; + if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) + == IWL_CHANNEL_WIDTH_40MHZ) tbl->is_fat = 1; else tbl->is_fat = 0; + /* FIXME: - don't toggle SGI here if (tbl->is_fat) { if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) tbl->is_SGI = 1; @@ -1224,23 +1197,35 @@ static int rs_switch_to_mimo(struct iwl_priv *priv, tbl->is_SGI = 1; else tbl->is_SGI = 0; + */ + + rs_set_expected_tpt_table(lq_sta, tbl); - rs_get_expected_tpt_table(lq_sta, tbl); + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index, index); + IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); - IWL_DEBUG_HT("LQ: MIMO best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) + if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { + IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n", + rate, rate_mask); return -1; - rs_mcs_from_tbl(&tbl->current_rate, tbl, rate, is_green); + } + tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); - IWL_DEBUG_HT("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate.rate_n_flags, is_green); + IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); return 0; +} #else +static int rs_switch_to_mimo2(struct iwl_priv *priv, + struct iwl4965_lq_sta *lq_sta, + struct ieee80211_conf *conf, + struct sta_info *sta, + struct iwl4965_scale_tbl_info *tbl, int index) +{ return -1; -#endif /*CONFIG_IWL4965_HT */ } +#endif /*CONFIG_IWL4965_HT */ /* * Set up search table for SISO @@ -1256,16 +1241,16 @@ static int rs_switch_to_siso(struct iwl_priv *priv, u8 is_green = lq_sta->is_green; s32 rate; - IWL_DEBUG_HT("LQ: try to switch to SISO\n"); if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || !sta->ht_info.ht_supported) return -1; + IWL_DEBUG_RATE("LQ: try to switch to SISO\n"); + tbl->is_dup = lq_sta->is_dup; tbl->lq_type = LQ_SISO; tbl->action = 0; - rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, - &rate_mask); + rate_mask = lq_sta->active_siso_rate; if (priv->current_ht_config.supported_chan_width == IWL_CHANNEL_WIDTH_40MHZ) @@ -1273,6 +1258,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, else tbl->is_fat = 0; + /* FIXME: - don't toggle SGI here if (tbl->is_fat) { if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) tbl->is_SGI = 1; @@ -1282,26 +1268,26 @@ static int rs_switch_to_siso(struct iwl_priv *priv, tbl->is_SGI = 1; else tbl->is_SGI = 0; + */ if (is_green) - tbl->is_SGI = 0; + tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ - rs_get_expected_tpt_table(lq_sta, tbl); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index, index); + rs_set_expected_tpt_table(lq_sta, tbl); + rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - IWL_DEBUG_HT("LQ: get best rate %d mask %X\n", rate, rate_mask); + IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask); if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_HT("can not switch with index %d rate mask %x\n", + IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n", rate, rate_mask); return -1; } - rs_mcs_from_tbl(&tbl->current_rate, tbl, rate, is_green); - IWL_DEBUG_HT("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate.rate_n_flags, is_green); + tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); + IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", + tbl->current_rate, is_green); return 0; #else return -1; - #endif /*CONFIG_IWL4965_HT */ } @@ -1314,7 +1300,6 @@ static int rs_move_legacy_other(struct iwl_priv *priv, struct sta_info *sta, int index) { - int ret = 0; struct iwl4965_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); struct iwl4965_scale_tbl_info *search_tbl = @@ -1323,41 +1308,35 @@ static int rs_move_legacy_other(struct iwl_priv *priv, u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + int ret = 0; for (; ;) { switch (tbl->action) { case IWL_LEGACY_SWITCH_ANTENNA: - IWL_DEBUG_HT("LQ Legacy switch Antenna\n"); + IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n"); - search_tbl->lq_type = LQ_NONE; lq_sta->action_counter++; /* Don't change antenna if success has been great */ if (window->success_ratio >= IWL_RS_GOOD_RATIO) break; - /* Don't change antenna if other one is not connected */ - if (!rs_is_other_ant_connected(lq_sta->antenna, - tbl->antenna_type)) - break; - /* Set up search table to try other antenna */ memcpy(search_tbl, tbl, sz); - rs_toggle_antenna(&(search_tbl->current_rate), - search_tbl); - rs_get_expected_tpt_table(lq_sta, search_tbl); - lq_sta->search_better_tbl = 1; - goto out; + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + lq_sta->search_better_tbl = 1; + goto out; + } case IWL_LEGACY_SWITCH_SISO: - IWL_DEBUG_HT("LQ: Legacy switch to SISO\n"); + IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n"); /* Set up search table to try SISO */ memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_SISO; search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; ret = rs_switch_to_siso(priv, lq_sta, conf, sta, search_tbl, index); if (!ret) { @@ -1367,16 +1346,15 @@ static int rs_move_legacy_other(struct iwl_priv *priv, } break; - case IWL_LEGACY_SWITCH_MIMO: - IWL_DEBUG_HT("LQ: Legacy switch MIMO\n"); + case IWL_LEGACY_SWITCH_MIMO2: + IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n"); /* Set up search table to try MIMO */ memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_MIMO; search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; - search_tbl->antenna_type = ANT_BOTH; - ret = rs_switch_to_mimo(priv, lq_sta, conf, sta, + search_tbl->ant_type = ANT_AB;/*FIXME:RS*/ + /*FIXME:RS:need to check ant validity*/ + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, search_tbl, index); if (!ret) { lq_sta->search_better_tbl = 1; @@ -1386,7 +1364,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv, break; } tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO) + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) tbl->action = IWL_LEGACY_SWITCH_ANTENNA; if (tbl->action == start_action) @@ -1397,7 +1375,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv, out: tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO) + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) tbl->action = IWL_LEGACY_SWITCH_ANTENNA; return 0; @@ -1412,7 +1390,6 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, struct sta_info *sta, int index) { - int ret; u8 is_green = lq_sta->is_green; struct iwl4965_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); @@ -1422,35 +1399,30 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; + u8 valid_tx_ant = priv->hw_params.valid_tx_ant; + int ret; for (;;) { lq_sta->action_counter++; switch (tbl->action) { case IWL_SISO_SWITCH_ANTENNA: - IWL_DEBUG_HT("LQ: SISO SWITCH ANTENNA SISO\n"); - search_tbl->lq_type = LQ_NONE; + IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n"); if (window->success_ratio >= IWL_RS_GOOD_RATIO) break; - if (!rs_is_other_ant_connected(lq_sta->antenna, - tbl->antenna_type)) - break; memcpy(search_tbl, tbl, sz); - search_tbl->action = IWL_SISO_SWITCH_MIMO; - rs_toggle_antenna(&(search_tbl->current_rate), - search_tbl); - lq_sta->search_better_tbl = 1; - - goto out; + if (rs_toggle_antenna(valid_tx_ant, + &search_tbl->current_rate, search_tbl)) { + lq_sta->search_better_tbl = 1; + goto out; + } - case IWL_SISO_SWITCH_MIMO: - IWL_DEBUG_HT("LQ: SISO SWITCH TO MIMO FROM SISO\n"); + case IWL_SISO_SWITCH_MIMO2: + IWL_DEBUG_RATE("LQ: SISO switch to MIMO\n"); memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_MIMO; search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; - search_tbl->antenna_type = ANT_BOTH; - ret = rs_switch_to_mimo(priv, lq_sta, conf, sta, + search_tbl->ant_type = ANT_AB; /*FIXME:RS*/ + ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, search_tbl, index); if (!ret) { lq_sta->search_better_tbl = 1; @@ -1458,29 +1430,25 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, } break; case IWL_SISO_SWITCH_GI: - IWL_DEBUG_HT("LQ: SISO SWITCH TO GI\n"); + IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n"); memcpy(search_tbl, tbl, sz); - search_tbl->action = 0; - if (search_tbl->is_SGI) - search_tbl->is_SGI = 0; - else if (!is_green) - search_tbl->is_SGI = 1; - else - break; - lq_sta->search_better_tbl = 1; - if ((tbl->lq_type == LQ_SISO) && - (tbl->is_SGI)) { + if (is_green) { + if (!tbl->is_SGI) + break; + else + IWL_ERROR("SGI was set in GF+SISO\n"); + } + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); + if (tbl->is_SGI) { s32 tpt = lq_sta->last_tpt / 100; - if (((!tbl->is_fat) && - (tpt >= expected_tpt_siso20MHz[index])) || - ((tbl->is_fat) && - (tpt >= expected_tpt_siso40MHz[index]))) - lq_sta->search_better_tbl = 0; + if (tpt >= search_tbl->expected_tpt[index]) + break; } - rs_get_expected_tpt_table(lq_sta, search_tbl); - rs_mcs_from_tbl(&search_tbl->current_rate, - search_tbl, index, is_green); + search_tbl->current_rate = rate_n_flags_from_tbl( + search_tbl, index, is_green); + lq_sta->search_better_tbl = 1; goto out; } tbl->action++; @@ -1508,7 +1476,6 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv, struct sta_info *sta, int index) { - int ret; s8 is_green = lq_sta->is_green; struct iwl4965_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); @@ -1517,24 +1484,24 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv, u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; + /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ + int ret; for (;;) { lq_sta->action_counter++; switch (tbl->action) { case IWL_MIMO_SWITCH_ANTENNA_A: case IWL_MIMO_SWITCH_ANTENNA_B: - IWL_DEBUG_HT("LQ: MIMO SWITCH TO SISO\n"); - + IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n"); /* Set up new search table for SISO */ memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_SISO; - search_tbl->is_SGI = 0; - search_tbl->is_fat = 0; + + /*FIXME:RS:need to check ant validity + C*/ if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) - search_tbl->antenna_type = ANT_MAIN; + search_tbl->ant_type = ANT_A; else - search_tbl->antenna_type = ANT_AUX; + search_tbl->ant_type = ANT_B; ret = rs_switch_to_siso(priv, lq_sta, conf, sta, search_tbl, index); @@ -1545,37 +1512,26 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv, break; case IWL_MIMO_SWITCH_GI: - IWL_DEBUG_HT("LQ: MIMO SWITCH TO GI\n"); + IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n"); /* Set up new search table for MIMO */ memcpy(search_tbl, tbl, sz); - search_tbl->lq_type = LQ_MIMO; - search_tbl->antenna_type = ANT_BOTH; - search_tbl->action = 0; - if (search_tbl->is_SGI) - search_tbl->is_SGI = 0; - else - search_tbl->is_SGI = 1; - lq_sta->search_better_tbl = 1; - + search_tbl->is_SGI = !tbl->is_SGI; + rs_set_expected_tpt_table(lq_sta, search_tbl); /* * If active table already uses the fastest possible * modulation (dual stream with short guard interval), * and it's working well, there's no need to look * for a better type of modulation! */ - if ((tbl->lq_type == LQ_MIMO) && - (tbl->is_SGI)) { + if (tbl->is_SGI) { s32 tpt = lq_sta->last_tpt / 100; - if (((!tbl->is_fat) && - (tpt >= expected_tpt_mimo20MHz[index])) || - ((tbl->is_fat) && - (tpt >= expected_tpt_mimo40MHz[index]))) - lq_sta->search_better_tbl = 0; + if (tpt >= search_tbl->expected_tpt[index]) + break; } - rs_get_expected_tpt_table(lq_sta, search_tbl); - rs_mcs_from_tbl(&search_tbl->current_rate, - search_tbl, index, is_green); + search_tbl->current_rate = rate_n_flags_from_tbl( + search_tbl, index, is_green); + lq_sta->search_better_tbl = 1; goto out; } @@ -1624,9 +1580,6 @@ static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) (unsigned long)(lq_sta->flush_timer + IWL_RATE_SCALE_FLUSH_INTVL)); - /* For now, disable the elapsed time criterion */ - flush_interval_passed = 0; - /* * Check if we should allow search for new modulation mode. * If many frames have failed or succeeded, or we've used @@ -1639,7 +1592,7 @@ static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) (lq_sta->total_success > lq_sta->max_success_limit) || ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) && (flush_interval_passed))) { - IWL_DEBUG_HT("LQ: stay is expired %d %d %d\n:", + IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:", lq_sta->total_failed, lq_sta->total_success, flush_interval_passed); @@ -1662,7 +1615,7 @@ static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) lq_sta->table_count_limit) { lq_sta->table_count = 0; - IWL_DEBUG_HT("LQ: stay in table clear win\n"); + IWL_DEBUG_RATE("LQ: stay in table clear win\n"); for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window( &(tbl->win[i])); @@ -1705,7 +1658,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, struct iwl4965_lq_sta *lq_sta; struct iwl4965_scale_tbl_info *tbl, *tbl1; u16 rate_scale_index_msk = 0; - struct iwl4965_rate mcs_rate; + u32 rate; u8 is_green = 0; u8 active_tbl = 0; u8 done_search = 0; @@ -1761,8 +1714,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, tbl->lq_type); /* rates available for this association, and for modulation mode */ - rs_get_supported_rates(lq_sta, hdr, tbl->lq_type, - &rate_mask); + rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask); @@ -1782,27 +1734,16 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, if (!rate_scale_index_msk) rate_scale_index_msk = rate_mask; - /* If current rate is no longer supported on current association, - * or user changed preferences for rates, find a new supported rate. */ - if (index < 0 || !((1 << index) & rate_scale_index_msk)) { - index = IWL_INVALID_VALUE; - update_lq = 1; - - /* get the highest available rate */ - for (i = 0; i <= IWL_RATE_COUNT; i++) { - if ((1 << i) & rate_scale_index_msk) - index = i; - } - - if (index == IWL_INVALID_VALUE) { - IWL_WARNING("Can not find a suitable rate\n"); - return; - } + if (!((1 << index) & rate_scale_index_msk)) { + IWL_ERROR("Current Rate is not valid\n"); + return; } /* Get expected throughput table and history window for current rate */ - if (!tbl->expected_tpt) - rs_get_expected_tpt_table(lq_sta, tbl); + if (!tbl->expected_tpt) { + IWL_ERROR("tbl->expected_tpt is NULL\n"); + return; + } window = &(tbl->win[index]); @@ -1814,10 +1755,9 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * in current association (use new rate found above). */ fail_count = window->counter - window->success_counter; - if (((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) - || (tbl->expected_tpt == NULL)) { - IWL_DEBUG_RATE("LQ: still below TH succ %d total %d " + if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && + (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { + IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d " "for index %d\n", window->success_counter, window->counter, index); @@ -1828,44 +1768,51 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * or search for a new one? */ rs_stay_in_table(lq_sta); - /* Set up new rate table in uCode, if needed */ - if (update_lq) { - rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green); - rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } goto out; /* Else we have enough samples; calculate estimate of * actual average throughput */ - } else - window->average_tpt = ((window->success_ratio * + } else { + /*FIXME:RS remove this else if we don't get this error*/ + if (window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)) { + IWL_ERROR("expected_tpt should have been calculated" + " by now\n"); + window->average_tpt = ((window->success_ratio * tbl->expected_tpt[index] + 64) / 128); + } + } /* If we are searching for better modulation mode, check success. */ if (lq_sta->search_better_tbl) { - int success_limit = IWL_RATE_SCALE_SWITCH; /* If good success, continue using the "search" mode; * no need to send new link quality command, since we're * continuing to use the setup that we've been trying. */ - if ((window->success_ratio > success_limit) || - (window->average_tpt > lq_sta->last_tpt)) { - if (!is_legacy(tbl->lq_type)) { - IWL_DEBUG_HT("LQ: we are switching to HT" - " rate suc %d current tpt %d" - " old tpt %d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); + if (window->average_tpt > lq_sta->last_tpt) { + + IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + + if (!is_legacy(tbl->lq_type)) lq_sta->enable_counter = 1; - } + /* Swap tables; "search" becomes "active" */ lq_sta->active_tbl = active_tbl; current_tpt = window->average_tpt; /* Else poor success; go back to mode in "active" table */ } else { + + IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE " + "suc=%d cur-tpt=%d old-tpt=%d\n", + window->success_ratio, + window->average_tpt, + lq_sta->last_tpt); + /* Nullify "search" table */ tbl->lq_type = LQ_NONE; @@ -1875,12 +1822,11 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, /* Revert to "active" rate and throughput info */ index = iwl4965_hwrate_to_plcp_idx( - tbl->current_rate.rate_n_flags); + tbl->current_rate); current_tpt = lq_sta->last_tpt; /* Need to set up a new rate table in uCode */ update_lq = 1; - IWL_DEBUG_HT("XXY GO BACK TO OLD TABLE\n"); } /* Either way, we've made a decision; modulation mode @@ -1988,15 +1934,15 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, break; } - IWL_DEBUG_HT("choose rate scale index %d action %d low %d " + IWL_DEBUG_RATE("choose rate scale index %d action %d low %d " "high %d type %d\n", index, scale_action, low, high, tbl->lq_type); lq_update: /* Replace uCode's rate table for the destination station. */ if (update_lq) { - rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green); - rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq); + rate = rate_n_flags_from_tbl(tbl, index, is_green); + rs_fill_link_cmd(priv, lq_sta, rate); iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); } @@ -2031,12 +1977,11 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, /* Use new "search" start rate */ index = iwl4965_hwrate_to_plcp_idx( - tbl->current_rate.rate_n_flags); + tbl->current_rate); - IWL_DEBUG_HT("Switch current mcs: %X index: %d\n", - tbl->current_rate.rate_n_flags, index); - rs_fill_link_cmd(lq_sta, &tbl->current_rate, - &lq_sta->lq); + IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n", + tbl->current_rate, index); + rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); } @@ -2052,7 +1997,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, #endif (lq_sta->action_counter >= 1)) { lq_sta->action_counter = 0; - IWL_DEBUG_HT("LQ: STAY in legacy table\n"); + IWL_DEBUG_RATE("LQ: STAY in legacy table\n"); rs_set_stay_in_table(1, lq_sta); } @@ -2065,7 +2010,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && (lq_sta->tx_agg_tid_en & (1 << tid)) && (tid != MAX_TID_COUNT)) { - IWL_DEBUG_HT("try to aggregate tid %d\n", tid); + IWL_DEBUG_RATE("try to aggregate tid %d\n", tid); rs_tl_turn_on_agg(priv, tid, lq_sta, sta); } #endif /*CONFIG_IWL4965_HT */ @@ -2086,7 +2031,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, } out: - rs_mcs_from_tbl(&tbl->current_rate, tbl, index, is_green); + tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green); i = index; sta->last_txrate_idx = i; @@ -2106,13 +2051,14 @@ static void rs_initialize_lq(struct iwl_priv *priv, struct ieee80211_conf *conf, struct sta_info *sta) { - int i; struct iwl4965_lq_sta *lq_sta; struct iwl4965_scale_tbl_info *tbl; - u8 active_tbl = 0; int rate_idx; + int i; + u32 rate; u8 use_green = rs_use_green(priv, conf); - struct iwl4965_rate mcs_rate; + u8 active_tbl = 0; + u8 valid_tx_ant; if (!sta || !sta->rate_ctrl_priv) goto out; @@ -2124,6 +2070,8 @@ static void rs_initialize_lq(struct iwl_priv *priv, (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) goto out; + valid_tx_ant = priv->hw_params.valid_tx_ant; + if (!lq_sta->search_better_tbl) active_tbl = lq_sta->active_tbl; else @@ -2134,22 +2082,23 @@ static void rs_initialize_lq(struct iwl_priv *priv, if ((i < 0) || (i >= IWL_RATE_COUNT)) i = 0; - mcs_rate.rate_n_flags = iwl4965_rates[i].plcp ; - mcs_rate.rate_n_flags |= RATE_MCS_ANT_B_MSK; - mcs_rate.rate_n_flags &= ~RATE_MCS_ANT_A_MSK; + /* FIXME:RS: This is also wrong in 4965 */ + rate = iwl4965_rates[i].plcp; + rate |= RATE_MCS_ANT_B_MSK; + rate &= ~RATE_MCS_ANT_A_MSK; if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) - mcs_rate.rate_n_flags |= RATE_MCS_CCK_MSK; + rate |= RATE_MCS_CCK_MSK; - tbl->antenna_type = ANT_AUX; - rs_get_tbl_info_from_mcs(&mcs_rate, priv->band, tbl, &rate_idx); - if (!rs_is_ant_connected(priv->valid_antenna, tbl->antenna_type)) - rs_toggle_antenna(&mcs_rate, tbl); + tbl->ant_type = ANT_B; + rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); + if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) + rs_toggle_antenna(valid_tx_ant, &rate, tbl); - rs_mcs_from_tbl(&mcs_rate, tbl, rate_idx, use_green); - tbl->current_rate.rate_n_flags = mcs_rate.rate_n_flags; - rs_get_expected_tpt_table(lq_sta, tbl); - rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq); + rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green); + tbl->current_rate = rate; + rs_set_expected_tpt_table(lq_sta, tbl); + rs_fill_link_cmd(NULL, lq_sta, rate); iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); out: return; @@ -2190,7 +2139,7 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev, if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && !lq_sta->ibss_sta_added) { - u8 sta_id = iwl4965_hw_find_station(priv, hdr->addr1); + u8 sta_id = iwl_find_station(priv, hdr->addr1); DECLARE_MAC_BUF(mac); if (sta_id == IWL_INVALID_STATION) { @@ -2260,7 +2209,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - IWL_DEBUG_RATE("rate scale global init\n"); + IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); /* TODO: what is a good starting rate for STA? About middle? Maybe not * the lowest or the highest rate.. Could consider using RSSI from * previous packets? Need to have IEEE 802.1X auth succeed immediately @@ -2268,11 +2217,11 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, lq_sta->ibss_sta_added = 0; if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - u8 sta_id = iwl4965_hw_find_station(priv, sta->addr); + u8 sta_id = iwl_find_station(priv, sta->addr); DECLARE_MAC_BUF(mac); /* for IBSS the call are from tasklet */ - IWL_DEBUG_HT("LQ: ADD station %s\n", + IWL_DEBUG_RATE("LQ: ADD station %s\n", print_mac(mac, sta->addr)); if (sta_id == IWL_INVALID_STATION) { @@ -2301,11 +2250,8 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; lq_sta->is_dup = 0; - lq_sta->valid_antenna = priv->valid_antenna; - lq_sta->antenna = priv->antenna; lq_sta->is_green = rs_use_green(priv, conf); - lq_sta->active_rate = priv->active_rate; - lq_sta->active_rate &= ~(0x1000); + lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); lq_sta->active_rate_basic = priv->active_rate_basic; lq_sta->band = priv->band; #ifdef CONFIG_IWL4965_HT @@ -2313,23 +2259,37 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), * supp_rates[] does not; shift to convert format, force 9 MBits off. */ - lq_sta->active_siso_rate = (priv->current_ht_config.supp_mcs_set[0] << 1); + lq_sta->active_siso_rate = + priv->current_ht_config.supp_mcs_set[0] << 1; lq_sta->active_siso_rate |= - (priv->current_ht_config.supp_mcs_set[0] & 0x1); + priv->current_ht_config.supp_mcs_set[0] & 0x1; lq_sta->active_siso_rate &= ~((u16)0x2); - lq_sta->active_siso_rate = - lq_sta->active_siso_rate << IWL_FIRST_OFDM_RATE; + lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; /* Same here */ - lq_sta->active_mimo_rate = (priv->current_ht_config.supp_mcs_set[1] << 1); - lq_sta->active_mimo_rate |= - (priv->current_ht_config.supp_mcs_set[1] & 0x1); - lq_sta->active_mimo_rate &= ~((u16)0x2); - lq_sta->active_mimo_rate = - lq_sta->active_mimo_rate << IWL_FIRST_OFDM_RATE; - IWL_DEBUG_HT("SISO RATE 0x%X MIMO RATE 0x%X\n", + lq_sta->active_mimo2_rate = + priv->current_ht_config.supp_mcs_set[1] << 1; + lq_sta->active_mimo2_rate |= + priv->current_ht_config.supp_mcs_set[1] & 0x1; + lq_sta->active_mimo2_rate &= ~((u16)0x2); + lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; + + lq_sta->active_mimo3_rate = + priv->current_ht_config.supp_mcs_set[2] << 1; + lq_sta->active_mimo3_rate |= + priv->current_ht_config.supp_mcs_set[2] & 0x1; + lq_sta->active_mimo3_rate &= ~((u16)0x2); + lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; + + IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", lq_sta->active_siso_rate, - lq_sta->active_mimo_rate); + lq_sta->active_mimo2_rate, + lq_sta->active_mimo3_rate); + + /* These values will be overriden later */ + lq_sta->lq.general_params.single_stream_ant_msk = ANT_A; + lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; + /* as default allow aggregation for all tids */ lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; #endif /*CONFIG_IWL4965_HT*/ @@ -2343,50 +2303,55 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, rs_initialize_lq(priv, conf, sta); } -static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *tx_mcs, - struct iwl_link_quality_cmd *lq_cmd) +static void rs_fill_link_cmd(const struct iwl_priv *priv, + struct iwl4965_lq_sta *lq_sta, + u32 new_rate) { + struct iwl4965_scale_tbl_info tbl_type; int index = 0; int rate_idx; int repeat_rate = 0; - u8 ant_toggle_count = 0; + u8 ant_toggle_cnt = 0; u8 use_ht_possible = 1; - struct iwl4965_rate new_rate; - struct iwl4965_scale_tbl_info tbl_type = { 0 }; + u8 valid_tx_ant = 0; + struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, tx_mcs, index); + rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - /* Interpret rate_n_flags */ - rs_get_tbl_info_from_mcs(tx_mcs, lq_sta->band, + /* Interpret new_rate (rate_n_flags) */ + memset(&tbl_type, 0, sizeof(tbl_type)); + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, &rate_idx); /* How many times should we repeat the initial rate? */ if (is_legacy(tbl_type.lq_type)) { - ant_toggle_count = 1; + ant_toggle_cnt = 1; repeat_rate = IWL_NUMBER_TRY; - } else + } else { repeat_rate = IWL_HT_NUMBER_TRY; + } lq_cmd->general_params.mimo_delimiter = is_mimo(tbl_type.lq_type) ? 1 : 0; /* Fill 1st table entry (index 0) */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(tx_mcs->rate_n_flags); - new_rate.rate_n_flags = tx_mcs->rate_n_flags; + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - if (is_mimo(tbl_type.lq_type) || (tbl_type.antenna_type == ANT_MAIN)) - lq_cmd->general_params.single_stream_ant_msk - = LINK_QUAL_ANT_A_MSK; - else - lq_cmd->general_params.single_stream_ant_msk - = LINK_QUAL_ANT_B_MSK; + if (num_of_ant(tbl_type.ant_type) == 1) { + lq_cmd->general_params.single_stream_ant_msk = + tbl_type.ant_type; + } else if (num_of_ant(tbl_type.ant_type) == 2) { + lq_cmd->general_params.dual_stream_ant_msk = + tbl_type.ant_type; + } /* otherwise we don't modify the existing value */ index++; repeat_rate--; + if (priv) + valid_tx_ant = priv->hw_params.valid_tx_ant; + /* Fill rest of rate table */ while (index < LINK_QUAL_MAX_RETRY_NUM) { /* Repeat initial/next rate. @@ -2394,26 +2359,25 @@ static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_count < - NUM_TRY_BEFORE_ANTENNA_TOGGLE) - ant_toggle_count++; - else { - rs_toggle_antenna(&new_rate, &tbl_type); - ant_toggle_count = 1; - } - } + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; +} /* Override next rate if needed for debug purposes */ rs_dbgfs_set_mcs(lq_sta, &new_rate, index); /* Fill next table entry */ lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate.rate_n_flags); + cpu_to_le32(new_rate); repeat_rate--; index++; } - rs_get_tbl_info_from_mcs(&new_rate, lq_sta->band, &tbl_type, + rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, &rate_idx); /* Indicate to uCode which entries might be MIMO. @@ -2423,20 +2387,22 @@ static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, lq_cmd->general_params.mimo_delimiter = index; /* Get next rate */ - rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, - use_ht_possible, &new_rate); + new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, + use_ht_possible); /* How many times should we repeat the next rate? */ if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_count < NUM_TRY_BEFORE_ANTENNA_TOGGLE) - ant_toggle_count++; - else { - rs_toggle_antenna(&new_rate, &tbl_type); - ant_toggle_count = 1; - } + if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) + ant_toggle_cnt++; + else if (priv && + rs_toggle_antenna(valid_tx_ant, + &new_rate, &tbl_type)) + ant_toggle_cnt = 1; + repeat_rate = IWL_NUMBER_TRY; - } else + } else { repeat_rate = IWL_HT_NUMBER_TRY; + } /* Don't allow HT rates after next pass. * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ @@ -2446,14 +2412,12 @@ static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta, rs_dbgfs_set_mcs(lq_sta, &new_rate, index); /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate.rate_n_flags); + lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); index++; repeat_rate--; } - lq_cmd->general_params.dual_stream_ant_msk = 3; lq_cmd->agg_params.agg_dis_start_th = 3; lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); } @@ -2496,25 +2460,21 @@ static int open_file_generic(struct inode *inode, struct file *file) return 0; } static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_rate *mcs, int index) + u32 *rate_n_flags, int index) { - u32 base_rate; - - if (lq_sta->band == IEEE80211_BAND_5GHZ) - base_rate = 0x800D; - else - base_rate = 0x820A; - - if (lq_sta->dbg_fixed.rate_n_flags) { - if (index < 12) - mcs->rate_n_flags = lq_sta->dbg_fixed.rate_n_flags; - else - mcs->rate_n_flags = base_rate; + if (lq_sta->dbg_fixed_rate) { + if (index < 12) { + *rate_n_flags = lq_sta->dbg_fixed_rate; + } else { + if (lq_sta->band == IEEE80211_BAND_5GHZ) + *rate_n_flags = 0x800D; + else + *rate_n_flags = 0x820A; + } IWL_DEBUG_RATE("Fixed rate ON\n"); - return; + } else { + IWL_DEBUG_RATE("Fixed rate OFF\n"); } - - IWL_DEBUG_RATE("Fixed rate OFF\n"); } static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, @@ -2531,19 +2491,20 @@ static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, return -EFAULT; if (sscanf(buf, "%x", &parsed_rate) == 1) - lq_sta->dbg_fixed.rate_n_flags = parsed_rate; + lq_sta->dbg_fixed_rate = parsed_rate; else - lq_sta->dbg_fixed.rate_n_flags = 0; + lq_sta->dbg_fixed_rate = 0; - lq_sta->active_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ - lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", - lq_sta->lq.sta_id, lq_sta->dbg_fixed.rate_n_flags); + lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); - if (lq_sta->dbg_fixed.rate_n_flags) { - rs_fill_link_cmd(lq_sta, &lq_sta->dbg_fixed, &lq_sta->lq); + if (lq_sta->dbg_fixed_rate) { + rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC); } @@ -2562,9 +2523,9 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", lq_sta->total_failed, lq_sta->total_success, - lq_sta->active_rate); + lq_sta->active_legacy_rate); desc += sprintf(buff+desc, "fixed rate 0x%X\n", - lq_sta->dbg_fixed.rate_n_flags); + lq_sta->dbg_fixed_rate); desc += sprintf(buff+desc, "general:" "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", lq_sta->lq.general_params.flags, @@ -2614,7 +2575,7 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, lq_sta->lq_info[i].is_SGI, lq_sta->lq_info[i].is_fat, lq_sta->lq_info[i].is_dup, - lq_sta->lq_info[i].current_rate.rate_n_flags); + lq_sta->lq_info[i].current_rate); for (j = 0; j < IWL_RATE_COUNT; j++) { desc += sprintf(buff+desc, "counter=%d success=%d %%=%d\n", @@ -2704,7 +2665,7 @@ int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) lq_sta = (void *)sta->rate_ctrl_priv; lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; - antenna = lq_sta->lq_info[lq_sta->active_tbl].antenna_type; + antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type; if (is_legacy(lq_type)) i = IWL_RATE_54M_INDEX; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h index 866e378aa38..7ea2041a22e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h @@ -27,12 +27,13 @@ #ifndef __iwl_4965_rs_h__ #define __iwl_4965_rs_h__ -#include "iwl-4965.h" +#include "iwl-dev.h" struct iwl4965_rate_info { u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ - u8 plcp_mimo; /* uCode API: IWL_RATE_MIMO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ u8 prev_ieee; /* previous rate in IEEE speeds */ u8 next_ieee; /* next rate in IEEE speeds */ @@ -60,9 +61,9 @@ enum { IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX, IWL_RATE_60M_INDEX, - IWL_RATE_COUNT, + IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, - IWL_RATE_INVALID = IWL_RATE_INVM_INDEX + IWL_RATE_INVALID = IWL_RATE_COUNT, }; enum { @@ -97,11 +98,13 @@ enum { IWL_RATE_36M_PLCP = 11, IWL_RATE_48M_PLCP = 1, IWL_RATE_54M_PLCP = 3, - IWL_RATE_60M_PLCP = 3, + IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ IWL_RATE_1M_PLCP = 10, IWL_RATE_2M_PLCP = 20, IWL_RATE_5M_PLCP = 55, IWL_RATE_11M_PLCP = 110, + /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ + /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ }; /* 4965 uCode API values for OFDM high-throughput (HT) bit rates */ @@ -114,16 +117,25 @@ enum { IWL_RATE_SISO_48M_PLCP = 5, IWL_RATE_SISO_54M_PLCP = 6, IWL_RATE_SISO_60M_PLCP = 7, - IWL_RATE_MIMO_6M_PLCP = 0x8, - IWL_RATE_MIMO_12M_PLCP = 0x9, - IWL_RATE_MIMO_18M_PLCP = 0xa, - IWL_RATE_MIMO_24M_PLCP = 0xb, - IWL_RATE_MIMO_36M_PLCP = 0xc, - IWL_RATE_MIMO_48M_PLCP = 0xd, - IWL_RATE_MIMO_54M_PLCP = 0xe, - IWL_RATE_MIMO_60M_PLCP = 0xf, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, IWL_RATE_SISO_INVM_PLCP, - IWL_RATE_MIMO_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, }; /* MAC header values for bit rates */ @@ -196,11 +208,11 @@ enum { /* possible actions when in legacy mode */ #define IWL_LEGACY_SWITCH_ANTENNA 0 #define IWL_LEGACY_SWITCH_SISO 1 -#define IWL_LEGACY_SWITCH_MIMO 2 +#define IWL_LEGACY_SWITCH_MIMO2 2 /* possible actions when in siso mode */ #define IWL_SISO_SWITCH_ANTENNA 0 -#define IWL_SISO_SWITCH_MIMO 1 +#define IWL_SISO_SWITCH_MIMO2 1 #define IWL_SISO_SWITCH_GI 2 /* possible actions when in mimo mode */ @@ -208,6 +220,10 @@ enum { #define IWL_MIMO_SWITCH_ANTENNA_B 1 #define IWL_MIMO_SWITCH_GI 2 +/*FIXME:RS:separate MIMO2/3 transitions*/ + +/*FIXME:RS:add posible acctions for MIMO3*/ + #define IWL_ACTION_LIMIT 3 /* # possible actions */ #define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ @@ -226,29 +242,40 @@ enum { extern const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT]; -enum iwl4965_table_type { +enum iwl_table_type { LQ_NONE, LQ_G, /* legacy types */ LQ_A, LQ_SISO, /* high-throughput types */ - LQ_MIMO, + LQ_MIMO2, + LQ_MIMO3, LQ_MAX, }; #define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) -#define is_siso(tbl) (((tbl) == LQ_SISO)) -#define is_mimo(tbl) (((tbl) == LQ_MIMO)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) #define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) -#define is_a_band(tbl) (((tbl) == LQ_A)) -#define is_g_and(tbl) (((tbl) == LQ_G)) - -/* 4965 has 2 antennas/chains for Tx (but 3 for Rx) */ -enum iwl4965_antenna_type { - ANT_NONE, - ANT_MAIN, - ANT_AUX, - ANT_BOTH, -}; +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define ANT_NONE 0x0 +#define ANT_A BIT(0) +#define ANT_B BIT(1) +#define ANT_AB (ANT_A | ANT_B) +#define ANT_C BIT(2) +#define ANT_AC (ANT_A | ANT_C) +#define ANT_BC (ANT_B | ANT_C) +#define ANT_ABC (ANT_AB | ANT_C) + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) { diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index bf19eb8aafd..5d675e39bab 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -39,14 +39,15 @@ #include <asm/unaligned.h> #include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-io.h" #include "iwl-helpers.h" +#include "iwl-calib.h" /* module parameters */ static struct iwl_mod_params iwl4965_mod_params = { - .num_of_queues = IWL4965_MAX_NUM_QUEUES, + .num_of_queues = IWL49_NUM_QUEUES, .enable_qos = 1, .amsdu_size_8K = 1, /* the rest are 0 by default */ @@ -54,42 +55,6 @@ static struct iwl_mod_params iwl4965_mod_params = { static void iwl4965_hw_card_show_info(struct iwl_priv *priv); -#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_SISO_##s##M_PLCP, \ - IWL_RATE_MIMO_##s##M_PLCP, \ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX } - -/* - * Parameter order: - * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ - IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ -}; - #ifdef CONFIG_IWL4965_HT static const u16 default_tid_to_tx_fifo[] = { @@ -259,120 +224,12 @@ static int iwl4965_load_bsm(struct iwl_priv *priv) return 0; } -static int iwl4965_init_drv(struct iwl_priv *priv) -{ - int ret; - int i; - - priv->antenna = (enum iwl4965_antenna)priv->cfg->mod_params->antenna; - priv->retry_rate = 1; - priv->ibss_beacon = NULL; - - spin_lock_init(&priv->lock); - spin_lock_init(&priv->power_data.lock); - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - spin_lock_init(&priv->lq_mngr.lock); - - priv->shared_virt = pci_alloc_consistent(priv->pci_dev, - sizeof(struct iwl4965_shared), - &priv->shared_phys); - - if (!priv->shared_virt) { - ret = -ENOMEM; - goto err; - } - - memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared)); - - - for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) - INIT_LIST_HEAD(&priv->ibss_mac_hash[i]); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); - - /* Clear the driver's (not device's) station table */ - iwlcore_clear_stations_table(priv); - - priv->data_retry_limit = -1; - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = IEEE80211_IF_TYPE_STA; - - priv->use_ant_b_for_management_frame = 1; /* start with ant B */ - priv->valid_antenna = 0x7; /* assume all 3 connected */ - priv->ps_mode = IWL_MIMO_PS_NONE; - - /* Choose which receivers/antennas to use */ - iwl4965_set_rxon_chain(priv); - - iwlcore_reset_qos(priv); - - priv->qos_data.qos_active = 0; - priv->qos_data.qos_cap.val = 0; - - iwlcore_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); - - priv->rates_mask = IWL_RATES_MASK; - /* If power management is turned on, default to AC mode */ - priv->power_mode = IWL_POWER_AC; - priv->user_txpower_limit = IWL_DEFAULT_TX_POWER; - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERROR("initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwl4965_init_geos(priv); - if (ret) { - IWL_ERROR("initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERROR("Failed to register network device (error %d)\n", - ret); - goto err_free_geos; - } - - priv->hw->conf.beacon_int = 100; - priv->mac80211_registered = 1; - - return 0; - -err_free_geos: - iwl4965_free_geos(priv); -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - static int is_fat_channel(__le32 rxon_flags) { return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) || (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK); } -static u8 is_single_stream(struct iwl_priv *priv) -{ -#ifdef CONFIG_IWL4965_HT - if (!priv->current_ht_config.is_ht || - (priv->current_ht_config.supp_mcs_set[1] == 0) || - (priv->ps_mode == IWL_MIMO_PS_STATIC)) - return 1; -#else - return 1; -#endif /*CONFIG_IWL4965_HT */ - return 0; -} - int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags) { int idx = 0; @@ -381,8 +238,8 @@ int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags) if (rate_n_flags & RATE_MCS_HT_MSK) { idx = (rate_n_flags & 0xff); - if (idx >= IWL_RATE_MIMO_6M_PLCP) - idx = idx - IWL_RATE_MIMO_6M_PLCP; + if (idx >= IWL_RATE_MIMO2_6M_PLCP) + idx = idx - IWL_RATE_MIMO2_6M_PLCP; idx += IWL_FIRST_OFDM_RATE; /* skip 9M not supported in ht*/ @@ -410,7 +267,7 @@ void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, int rate_index; control->antenna_sel_tx = - ((rate_n_flags & RATE_MCS_ANT_AB_MSK) >> RATE_MCS_ANT_POS); + ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); if (rate_n_flags & RATE_MCS_HT_MSK) control->flags |= IEEE80211_TXCTL_OFDM_HT; if (rate_n_flags & RATE_MCS_GF_MSK) @@ -431,41 +288,6 @@ void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, &priv->bands[IEEE80211_BAND_2GHZ].bitrates[rate_index]; } -/* - * Determine how many receiver/antenna chains to use. - * More provides better reception via diversity. Fewer saves power. - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. - */ -static int iwl4965_get_rx_chain_counter(struct iwl_priv *priv, - u8 *idle_state, u8 *rx_state) -{ - u8 is_single = is_single_stream(priv); - u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; - - /* # of Rx chains to use when expecting MIMO. */ - if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - *rx_state = 2; - else - *rx_state = 3; - - /* # Rx chains when idling and maybe trying to save power */ - switch (priv->ps_mode) { - case IWL_MIMO_PS_STATIC: - case IWL_MIMO_PS_DYNAMIC: - *idle_state = (is_cam) ? 2 : 1; - break; - case IWL_MIMO_PS_NONE: - *idle_state = (is_cam) ? *rx_state : 1; - break; - default: - *idle_state = 1; - break; - } - - return 0; -} - int iwl4965_hw_rxq_stop(struct iwl_priv *priv) { int rc; @@ -491,39 +313,32 @@ int iwl4965_hw_rxq_stop(struct iwl_priv *priv) return 0; } -u8 iwl4965_hw_find_station(struct iwl_priv *priv, const u8 *addr) +/* + * EEPROM handlers + */ + +static int iwl4965_eeprom_check_version(struct iwl_priv *priv) { - int i; - int start = 0; - int ret = IWL_INVALID_STATION; - unsigned long flags; - DECLARE_MAC_BUF(mac); + u16 eeprom_ver; + u16 calib_ver; - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) || - (priv->iw_mode == IEEE80211_IF_TYPE_AP)) - start = IWL_STA_ID; + eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); - if (is_broadcast_ether_addr(addr)) - return priv->hw_params.bcast_sta_id; + calib_ver = iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET); - spin_lock_irqsave(&priv->sta_lock, flags); - for (i = start; i < priv->hw_params.max_stations; i++) - if ((priv->stations[i].used) && - (!compare_ether_addr - (priv->stations[i].sta.sta.addr, addr))) { - ret = i; - goto out; - } + if (eeprom_ver < EEPROM_4965_EEPROM_VERSION || + calib_ver < EEPROM_4965_TX_POWER_VERSION) + goto err; - IWL_DEBUG_ASSOC_LIMIT("can not find STA %s total %d\n", - print_mac(mac, addr), priv->num_stations); + return 0; +err: + IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", + eeprom_ver, EEPROM_4965_EEPROM_VERSION, + calib_ver, EEPROM_4965_TX_POWER_VERSION); + return -EINVAL; - out: - spin_unlock_irqrestore(&priv->sta_lock, flags); - return ret; } - -static int iwl4965_nic_set_pwr_src(struct iwl_priv *priv, int pwr_max) +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) { int ret; unsigned long flags; @@ -535,20 +350,21 @@ static int iwl4965_nic_set_pwr_src(struct iwl_priv *priv, int pwr_max) return ret; } - if (!pwr_max) { + if (src == IWL_PWR_SRC_VAUX) { u32 val; - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, - &val); + &val); - if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) + if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } else + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } + } else { iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); @@ -619,7 +435,7 @@ static int iwl4965_kw_init(struct iwl_priv *priv) if (rc) goto out; - iwl_write_direct32(priv, IWL_FH_KW_MEM_ADDR_REG, + iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, priv->kw.dma_addr >> 4); iwl_release_nic_access(priv); out: @@ -722,116 +538,115 @@ static int iwl4965_txq_ctx_reset(struct iwl_priv *priv) error_kw: return rc; } - -int iwl4965_hw_nic_init(struct iwl_priv *priv) +static int iwl4965_apm_init(struct iwl_priv *priv) { - int rc; unsigned long flags; - struct iwl4965_rx_queue *rxq = &priv->rxq; - u8 rev_id; - u32 val; - u8 val_link; - - iwl4965_power_init_handle(priv); + int ret = 0; - /* nic_init */ spin_lock_irqsave(&priv->lock, flags); - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + /* set "initialization complete" bit to move adapter + * D0U* --> D0A* state */ iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - rc = iwl_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO("Failed to init the card\n"); - return rc; - } - rc = iwl_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; + /* wait for clock stabilization */ + ret = iwl_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (ret < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out; } - iwl_read_prph(priv, APMG_CLK_CTRL_REG); + ret = iwl_grab_nic_access(priv); + if (ret) + goto out; + /* enable DMA */ iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); - iwl_read_prph(priv, APMG_CLK_CTRL_REG); udelay(20); iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); iwl_release_nic_access(priv); - iwl_write32(priv, CSR_INT_COALESCING, 512 / 32); +out: spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} - /* Determine HW type */ - rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id); - if (rc) - return rc; - IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id); +static void iwl4965_nic_config(struct iwl_priv *priv) +{ + unsigned long flags; + u32 val; + u16 radio_cfg; + u8 val_link; - iwl4965_nic_set_pwr_src(priv, 1); spin_lock_irqsave(&priv->lock, flags); - if ((rev_id & 0x80) == 0x80 && (rev_id & 0x7f) < 8) { + if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) { pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val); /* Enable No Snoop field */ pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8, val & ~(1 << 11)); } - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->eeprom.calib_version < EEPROM_TX_POWER_VERSION_NEW) { - IWL_ERROR("Older EEPROM detected! Aborting.\n"); - return -EINVAL; - } - pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); /* disable L1 entry -- workaround for pre-B1 */ pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02); - spin_lock_irqsave(&priv->lock, flags); + radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); - /* set CSR_HW_CONFIG_REG for uCode use */ + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) | + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); + /* set CSR_HW_CONFIG_REG for uCode use */ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR49_HW_IF_CONFIG_REG_BIT_4965_R | - CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI); + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); - rc = iwl_grab_nic_access(priv); - if (rc < 0) { - spin_unlock_irqrestore(&priv->lock, flags); - IWL_DEBUG_INFO("Failed to init the card\n"); - return rc; - } + priv->calib_info = (struct iwl_eeprom_calib_info *) + iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET); - iwl_read_prph(priv, APMG_PS_CTRL_REG); - iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); + spin_unlock_irqrestore(&priv->lock, flags); +} - iwl_release_nic_access(priv); + +int iwl4965_hw_nic_init(struct iwl_priv *priv) +{ + unsigned long flags; + struct iwl4965_rx_queue *rxq = &priv->rxq; + int ret; + + /* nic_init */ + priv->cfg->ops->lib->apm_ops.init(priv); + + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_INT_COALESCING, 512 / 32); spin_unlock_irqrestore(&priv->lock, flags); + ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN); + + priv->cfg->ops->lib->apm_ops.config(priv); + iwl4965_hw_card_show_info(priv); /* end nic_init */ /* Allocate the RX queue, or reset if it is already allocated */ if (!rxq->bd) { - rc = iwl4965_rx_queue_alloc(priv); - if (rc) { + ret = iwl4965_rx_queue_alloc(priv); + if (ret) { IWL_ERROR("Unable to initialize Rx queue\n"); return -ENOMEM; } @@ -850,15 +665,9 @@ int iwl4965_hw_nic_init(struct iwl_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); /* Allocate and init all Tx and Command queues */ - rc = iwl4965_txq_ctx_reset(priv); - if (rc) - return rc; - - if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n"); - - if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n"); + ret = iwl4965_txq_ctx_reset(priv); + if (ret) + return ret; set_bit(STATUS_INIT, &priv->status); @@ -916,9 +725,9 @@ void iwl4965_hw_txq_ctx_stop(struct iwl_priv *priv) } iwl_write_direct32(priv, - IWL_FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), 0x0); - iwl_poll_direct_bit(priv, IWL_FH_TSSR_TX_STATUS_REG, - IWL_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE + FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), 0x0); + iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG, + FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE (txq_id), 200); iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); @@ -993,15 +802,9 @@ static void iwl4965_bg_statistics_periodic(unsigned long data) iwl_send_statistics_request(priv, CMD_ASYNC); } -#define CT_LIMIT_CONST 259 -#define TM_CT_KILL_THRESHOLD 110 - void iwl4965_rf_kill_ct_config(struct iwl_priv *priv) { struct iwl4965_ct_kill_config cmd; - u32 R1, R2, R3; - u32 temp_th; - u32 crit_temperature; unsigned long flags; int ret = 0; @@ -1010,440 +813,28 @@ void iwl4965_rf_kill_ct_config(struct iwl_priv *priv) CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); spin_unlock_irqrestore(&priv->lock, flags); - if (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK) { - R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]); - R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]); - R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]); - } else { - R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]); - R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]); - R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]); - } - - temp_th = CELSIUS_TO_KELVIN(TM_CT_KILL_THRESHOLD); + cmd.critical_temperature_R = + cpu_to_le32(priv->hw_params.ct_kill_threshold); - crit_temperature = ((temp_th * (R3-R1))/CT_LIMIT_CONST) + R2; - cmd.critical_temperature_R = cpu_to_le32(crit_temperature); ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, sizeof(cmd), &cmd); if (ret) IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n"); else - IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded\n"); -} - -#ifdef CONFIG_IWL4965_SENSITIVITY - -/* "false alarms" are signals that our DSP tries to lock onto, - * but then determines that they are either noise, or transmissions - * from a distant wireless network (also "noise", really) that get - * "stepped on" by stronger transmissions within our own network. - * This algorithm attempts to set a sensitivity level that is high - * enough to receive all of our own network traffic, but not so - * high that our DSP gets too busy trying to lock onto non-network - * activity/noise. */ -static int iwl4965_sens_energy_cck(struct iwl_priv *priv, - u32 norm_fa, - u32 rx_enable_time, - struct statistics_general_data *rx_info) -{ - u32 max_nrg_cck = 0; - int i = 0; - u8 max_silence_rssi = 0; - u32 silence_ref = 0; - u8 silence_rssi_a = 0; - u8 silence_rssi_b = 0; - u8 silence_rssi_c = 0; - u32 val; - - /* "false_alarms" values below are cross-multiplications to assess the - * numbers of false alarms within the measured period of actual Rx - * (Rx is off when we're txing), vs the min/max expected false alarms - * (some should be expected if rx is sensitive enough) in a - * hypothetical listening period of 200 time units (TU), 204.8 msec: - * - * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time - * - * */ - u32 false_alarms = norm_fa * 200 * 1024; - u32 max_false_alarms = MAX_FA_CCK * rx_enable_time; - u32 min_false_alarms = MIN_FA_CCK * rx_enable_time; - struct iwl4965_sensitivity_data *data = NULL; - - data = &(priv->sensitivity_data); - - data->nrg_auto_corr_silence_diff = 0; - - /* Find max silence rssi among all 3 receivers. - * This is background noise, which may include transmissions from other - * networks, measured during silence before our network's beacon */ - silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a & - ALL_BAND_FILTER) >> 8); - silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b & - ALL_BAND_FILTER) >> 8); - silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c & - ALL_BAND_FILTER) >> 8); - - val = max(silence_rssi_b, silence_rssi_c); - max_silence_rssi = max(silence_rssi_a, (u8) val); - - /* Store silence rssi in 20-beacon history table */ - data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi; - data->nrg_silence_idx++; - if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L) - data->nrg_silence_idx = 0; - - /* Find max silence rssi across 20 beacon history */ - for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) { - val = data->nrg_silence_rssi[i]; - silence_ref = max(silence_ref, val); - } - IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n", - silence_rssi_a, silence_rssi_b, silence_rssi_c, - silence_ref); - - /* Find max rx energy (min value!) among all 3 receivers, - * measured during beacon frame. - * Save it in 10-beacon history table. */ - i = data->nrg_energy_idx; - val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c); - data->nrg_value[i] = min(rx_info->beacon_energy_a, val); - - data->nrg_energy_idx++; - if (data->nrg_energy_idx >= 10) - data->nrg_energy_idx = 0; - - /* Find min rx energy (max value) across 10 beacon history. - * This is the minimum signal level that we want to receive well. - * Add backoff (margin so we don't miss slightly lower energy frames). - * This establishes an upper bound (min value) for energy threshold. */ - max_nrg_cck = data->nrg_value[0]; - for (i = 1; i < 10; i++) - max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i])); - max_nrg_cck += 6; - - IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n", - rx_info->beacon_energy_a, rx_info->beacon_energy_b, - rx_info->beacon_energy_c, max_nrg_cck - 6); - - /* Count number of consecutive beacons with fewer-than-desired - * false alarms. */ - if (false_alarms < min_false_alarms) - data->num_in_cck_no_fa++; - else - data->num_in_cck_no_fa = 0; - IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n", - data->num_in_cck_no_fa); - - /* If we got too many false alarms this time, reduce sensitivity */ - if (false_alarms > max_false_alarms) { - IWL_DEBUG_CALIB("norm FA %u > max FA %u\n", - false_alarms, max_false_alarms); - IWL_DEBUG_CALIB("... reducing sensitivity\n"); - data->nrg_curr_state = IWL_FA_TOO_MANY; - - if (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) { - /* Store for "fewer than desired" on later beacon */ - data->nrg_silence_ref = silence_ref; - - /* increase energy threshold (reduce nrg value) - * to decrease sensitivity */ - if (data->nrg_th_cck > (NRG_MAX_CCK + NRG_STEP_CCK)) - data->nrg_th_cck = data->nrg_th_cck - - NRG_STEP_CCK; - } - - /* increase auto_corr values to decrease sensitivity */ - if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK) - data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1; - else { - val = data->auto_corr_cck + AUTO_CORR_STEP_CCK; - data->auto_corr_cck = min((u32)AUTO_CORR_MAX_CCK, val); - } - val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK; - data->auto_corr_cck_mrc = min((u32)AUTO_CORR_MAX_CCK_MRC, val); - - /* Else if we got fewer than desired, increase sensitivity */ - } else if (false_alarms < min_false_alarms) { - data->nrg_curr_state = IWL_FA_TOO_FEW; - - /* Compare silence level with silence level for most recent - * healthy number or too many false alarms */ - data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref - - (s32)silence_ref; - - IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n", - false_alarms, min_false_alarms, - data->nrg_auto_corr_silence_diff); - - /* Increase value to increase sensitivity, but only if: - * 1a) previous beacon did *not* have *too many* false alarms - * 1b) AND there's a significant difference in Rx levels - * from a previous beacon with too many, or healthy # FAs - * OR 2) We've seen a lot of beacons (100) with too few - * false alarms */ - if ((data->nrg_prev_state != IWL_FA_TOO_MANY) && - ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || - (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { - - IWL_DEBUG_CALIB("... increasing sensitivity\n"); - /* Increase nrg value to increase sensitivity */ - val = data->nrg_th_cck + NRG_STEP_CCK; - data->nrg_th_cck = min((u32)NRG_MIN_CCK, val); - - /* Decrease auto_corr values to increase sensitivity */ - val = data->auto_corr_cck - AUTO_CORR_STEP_CCK; - data->auto_corr_cck = max((u32)AUTO_CORR_MIN_CCK, val); - - val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK; - data->auto_corr_cck_mrc = - max((u32)AUTO_CORR_MIN_CCK_MRC, val); - - } else - IWL_DEBUG_CALIB("... but not changing sensitivity\n"); - - /* Else we got a healthy number of false alarms, keep status quo */ - } else { - IWL_DEBUG_CALIB(" FA in safe zone\n"); - data->nrg_curr_state = IWL_FA_GOOD_RANGE; - - /* Store for use in "fewer than desired" with later beacon */ - data->nrg_silence_ref = silence_ref; - - /* If previous beacon had too many false alarms, - * give it some extra margin by reducing sensitivity again - * (but don't go below measured energy of desired Rx) */ - if (IWL_FA_TOO_MANY == data->nrg_prev_state) { - IWL_DEBUG_CALIB("... increasing margin\n"); - data->nrg_th_cck -= NRG_MARGIN; - } - } - - /* Make sure the energy threshold does not go above the measured - * energy of the desired Rx signals (reduced by backoff margin), - * or else we might start missing Rx frames. - * Lower value is higher energy, so we use max()! - */ - data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck); - IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck); - - data->nrg_prev_state = data->nrg_curr_state; - - return 0; -} - - -static int iwl4965_sens_auto_corr_ofdm(struct iwl_priv *priv, - u32 norm_fa, - u32 rx_enable_time) -{ - u32 val; - u32 false_alarms = norm_fa * 200 * 1024; - u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time; - u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time; - struct iwl4965_sensitivity_data *data = NULL; - - data = &(priv->sensitivity_data); - - /* If we got too many false alarms this time, reduce sensitivity */ - if (false_alarms > max_false_alarms) { - - IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n", - false_alarms, max_false_alarms); - - val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm = - min((u32)AUTO_CORR_MAX_OFDM, val); - - val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc = - min((u32)AUTO_CORR_MAX_OFDM_MRC, val); - - val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_x1 = - min((u32)AUTO_CORR_MAX_OFDM_X1, val); - - val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc_x1 = - min((u32)AUTO_CORR_MAX_OFDM_MRC_X1, val); - } - - /* Else if we got fewer than desired, increase sensitivity */ - else if (false_alarms < min_false_alarms) { - - IWL_DEBUG_CALIB("norm FA %u < min FA %u\n", - false_alarms, min_false_alarms); - - val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm = - max((u32)AUTO_CORR_MIN_OFDM, val); - - val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc = - max((u32)AUTO_CORR_MIN_OFDM_MRC, val); - - val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_x1 = - max((u32)AUTO_CORR_MIN_OFDM_X1, val); - - val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc_x1 = - max((u32)AUTO_CORR_MIN_OFDM_MRC_X1, val); - } - - else - IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n", - min_false_alarms, false_alarms, max_false_alarms); - - return 0; -} - -static int iwl4965_sensitivity_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, struct sk_buff *skb) -{ - /* We didn't cache the SKB; let the caller free it */ - return 1; -} - -/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ -static int iwl4965_sensitivity_write(struct iwl_priv *priv, u8 flags) -{ - struct iwl4965_sensitivity_cmd cmd ; - struct iwl4965_sensitivity_data *data = NULL; - struct iwl_host_cmd cmd_out = { - .id = SENSITIVITY_CMD, - .len = sizeof(struct iwl4965_sensitivity_cmd), - .meta.flags = flags, - .data = &cmd, - }; - int ret; - - data = &(priv->sensitivity_data); - - memset(&cmd, 0, sizeof(cmd)); - - cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm); - cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_mrc); - cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_x1); - cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1); - - cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_cck); - cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_cck_mrc); - - cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] = - cpu_to_le16((u16)data->nrg_th_cck); - cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] = - cpu_to_le16((u16)data->nrg_th_ofdm); - - cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] = - __constant_cpu_to_le16(190); - cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] = - __constant_cpu_to_le16(390); - cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] = - __constant_cpu_to_le16(62); - - IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n", - data->auto_corr_ofdm, data->auto_corr_ofdm_mrc, - data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1, - data->nrg_th_ofdm); - - IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n", - data->auto_corr_cck, data->auto_corr_cck_mrc, - data->nrg_th_cck); - - /* Update uCode's "work" table, and copy it to DSP */ - cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; - - if (flags & CMD_ASYNC) - cmd_out.meta.u.callback = iwl4965_sensitivity_callback; - - /* Don't send command to uCode if nothing has changed */ - if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]), - sizeof(u16)*HD_TABLE_SIZE)) { - IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n"); - return 0; - } - - /* Copy table for comparison next time */ - memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), - sizeof(u16)*HD_TABLE_SIZE); - - ret = iwl_send_cmd(priv, &cmd_out); - if (ret) - IWL_ERROR("SENSITIVITY_CMD failed\n"); - - return ret; -} - -void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags, u8 force) -{ - struct iwl4965_sensitivity_data *data = NULL; - int i; - int ret = 0; - - IWL_DEBUG_CALIB("Start iwl4965_init_sensitivity\n"); - - if (force) - memset(&(priv->sensitivity_tbl[0]), 0, - sizeof(u16)*HD_TABLE_SIZE); - - /* Clear driver's sensitivity algo data */ - data = &(priv->sensitivity_data); - memset(data, 0, sizeof(struct iwl4965_sensitivity_data)); - - data->num_in_cck_no_fa = 0; - data->nrg_curr_state = IWL_FA_TOO_MANY; - data->nrg_prev_state = IWL_FA_TOO_MANY; - data->nrg_silence_ref = 0; - data->nrg_silence_idx = 0; - data->nrg_energy_idx = 0; - - for (i = 0; i < 10; i++) - data->nrg_value[i] = 0; - - for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) - data->nrg_silence_rssi[i] = 0; - - data->auto_corr_ofdm = 90; - data->auto_corr_ofdm_mrc = 170; - data->auto_corr_ofdm_x1 = 105; - data->auto_corr_ofdm_mrc_x1 = 220; - data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF; - data->auto_corr_cck_mrc = 200; - data->nrg_th_cck = 100; - data->nrg_th_ofdm = 100; - - data->last_bad_plcp_cnt_ofdm = 0; - data->last_fa_cnt_ofdm = 0; - data->last_bad_plcp_cnt_cck = 0; - data->last_fa_cnt_cck = 0; - - /* Clear prior Sensitivity command data to force send to uCode */ - if (force) - memset(&(priv->sensitivity_tbl[0]), 0, - sizeof(u16)*HD_TABLE_SIZE); - - ret |= iwl4965_sensitivity_write(priv, flags); - IWL_DEBUG_CALIB("<<return 0x%X\n", ret); - - return; + IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, " + "critical temperature is %d\n", + cmd.critical_temperature_R); } +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB /* Reset differential Rx gains in NIC to prepare for chain noise calibration. * Called after every association, but this runs only once! * ... once chain noise is calibrated the first time, it's good forever. */ -void iwl4965_chain_noise_reset(struct iwl_priv *priv) +static void iwl4965_chain_noise_reset(struct iwl_priv *priv) { - struct iwl4965_chain_noise_data *data = NULL; + struct iwl_chain_noise_data *data = &(priv->chain_noise_data); - data = &(priv->chain_noise_data); if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) { struct iwl4965_calibration_cmd cmd; @@ -1452,357 +843,76 @@ void iwl4965_chain_noise_reset(struct iwl_priv *priv) cmd.diff_gain_a = 0; cmd.diff_gain_b = 0; cmd.diff_gain_c = 0; - iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD, - sizeof(cmd), &cmd, NULL); - msleep(4); + if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd)) + IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n"); data->state = IWL_CHAIN_NOISE_ACCUMULATE; IWL_DEBUG_CALIB("Run chain_noise_calibrate\n"); } - return; } -/* - * Accumulate 20 beacons of signal and noise statistics for each of - * 3 receivers/antennas/rx-chains, then figure out: - * 1) Which antennas are connected. - * 2) Differential rx gain settings to balance the 3 receivers. - */ -static void iwl4965_noise_calibration(struct iwl_priv *priv, - struct iwl4965_notif_statistics *stat_resp) +static void iwl4965_gain_computation(struct iwl_priv *priv, + u32 *average_noise, + u16 min_average_noise_antenna_i, + u32 min_average_noise) { - struct iwl4965_chain_noise_data *data = NULL; - int ret = 0; - - u32 chain_noise_a; - u32 chain_noise_b; - u32 chain_noise_c; - u32 chain_sig_a; - u32 chain_sig_b; - u32 chain_sig_c; - u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 max_average_sig; - u16 max_average_sig_antenna_i; - u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; - u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; - u16 i = 0; - u16 chan_num = INITIALIZATION_VALUE; - u32 band = INITIALIZATION_VALUE; - u32 active_chains = 0; - unsigned long flags; - struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general); - - data = &(priv->chain_noise_data); - - /* Accumulate just the first 20 beacons after the first association, - * then we're done forever. */ - if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) { - if (data->state == IWL_CHAIN_NOISE_ALIVE) - IWL_DEBUG_CALIB("Wait for noise calib reset\n"); - return; - } - - spin_lock_irqsave(&priv->lock, flags); - if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { - IWL_DEBUG_CALIB(" << Interference data unavailable\n"); - spin_unlock_irqrestore(&priv->lock, flags); - return; - } - - band = (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) ? 0 : 1; - chan_num = le16_to_cpu(priv->staging_rxon.channel); - - /* Make sure we accumulate data for just the associated channel - * (even if scanning). */ - if ((chan_num != (le32_to_cpu(stat_resp->flag) >> 16)) || - ((STATISTICS_REPLY_FLG_BAND_24G_MSK == - (stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK)) && band)) { - IWL_DEBUG_CALIB("Stats not from chan=%d, band=%d\n", - chan_num, band); - spin_unlock_irqrestore(&priv->lock, flags); - return; - } - - /* Accumulate beacon statistics values across 20 beacons */ - chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) & - IN_BAND_FILTER; - chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) & - IN_BAND_FILTER; - chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) & - IN_BAND_FILTER; - - chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER; - chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER; - chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER; - - spin_unlock_irqrestore(&priv->lock, flags); - - data->beacon_count++; - - data->chain_noise_a = (chain_noise_a + data->chain_noise_a); - data->chain_noise_b = (chain_noise_b + data->chain_noise_b); - data->chain_noise_c = (chain_noise_c + data->chain_noise_c); - - data->chain_signal_a = (chain_sig_a + data->chain_signal_a); - data->chain_signal_b = (chain_sig_b + data->chain_signal_b); - data->chain_signal_c = (chain_sig_c + data->chain_signal_c); - - IWL_DEBUG_CALIB("chan=%d, band=%d, beacon=%d\n", chan_num, band, - data->beacon_count); - IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n", - chain_sig_a, chain_sig_b, chain_sig_c); - IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n", - chain_noise_a, chain_noise_b, chain_noise_c); - - /* If this is the 20th beacon, determine: - * 1) Disconnected antennas (using signal strengths) - * 2) Differential gain (using silence noise) to balance receivers */ - if (data->beacon_count == CAL_NUM_OF_BEACONS) { - - /* Analyze signal for disconnected antenna */ - average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS; - average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS; - average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS; - - if (average_sig[0] >= average_sig[1]) { - max_average_sig = average_sig[0]; - max_average_sig_antenna_i = 0; - active_chains = (1 << max_average_sig_antenna_i); - } else { - max_average_sig = average_sig[1]; - max_average_sig_antenna_i = 1; - active_chains = (1 << max_average_sig_antenna_i); - } - - if (average_sig[2] >= max_average_sig) { - max_average_sig = average_sig[2]; - max_average_sig_antenna_i = 2; - active_chains = (1 << max_average_sig_antenna_i); - } - - IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n", - average_sig[0], average_sig[1], average_sig[2]); - IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n", - max_average_sig, max_average_sig_antenna_i); - - /* Compare signal strengths for all 3 receivers. */ - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (i != max_average_sig_antenna_i) { - s32 rssi_delta = (max_average_sig - - average_sig[i]); - - /* If signal is very weak, compared with - * strongest, mark it as disconnected. */ - if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) - data->disconn_array[i] = 1; - else - active_chains |= (1 << i); - IWL_DEBUG_CALIB("i = %d rssiDelta = %d " - "disconn_array[i] = %d\n", - i, rssi_delta, data->disconn_array[i]); - } - } - - /*If both chains A & B are disconnected - - * connect B and leave A as is */ - if (data->disconn_array[CHAIN_A] && - data->disconn_array[CHAIN_B]) { - data->disconn_array[CHAIN_B] = 0; - active_chains |= (1 << CHAIN_B); - IWL_DEBUG_CALIB("both A & B chains are disconnected! " - "W/A - declare B as connected\n"); - } - - IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n", - active_chains); - - /* Save for use within RXON, TX, SCAN commands, etc. */ - priv->valid_antenna = active_chains; - - /* Analyze noise for rx balance */ - average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS); - average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS); - average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS); - - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (!(data->disconn_array[i]) && - (average_noise[i] <= min_average_noise)) { - /* This means that chain i is active and has - * lower noise values so far: */ - min_average_noise = average_noise[i]; - min_average_noise_antenna_i = i; - } - } - - data->delta_gain_code[min_average_noise_antenna_i] = 0; + int i, ret; + struct iwl_chain_noise_data *data = &priv->chain_noise_data; - IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n", - average_noise[0], average_noise[1], - average_noise[2]); + data->delta_gain_code[min_average_noise_antenna_i] = 0; - IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n", - min_average_noise, min_average_noise_antenna_i); + for (i = 0; i < NUM_RX_CHAINS; i++) { + s32 delta_g = 0; - for (i = 0; i < NUM_RX_CHAINS; i++) { - s32 delta_g = 0; - - if (!(data->disconn_array[i]) && - (data->delta_gain_code[i] == + if (!(data->disconn_array[i]) && + (data->delta_gain_code[i] == CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) { - delta_g = average_noise[i] - min_average_noise; - data->delta_gain_code[i] = (u8)((delta_g * - 10) / 15); - if (CHAIN_NOISE_MAX_DELTA_GAIN_CODE < - data->delta_gain_code[i]) - data->delta_gain_code[i] = - CHAIN_NOISE_MAX_DELTA_GAIN_CODE; - - data->delta_gain_code[i] = - (data->delta_gain_code[i] | (1 << 2)); - } else - data->delta_gain_code[i] = 0; - } - IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n", - data->delta_gain_code[0], - data->delta_gain_code[1], - data->delta_gain_code[2]); - - /* Differential gain gets sent to uCode only once */ - if (!data->radio_write) { - struct iwl4965_calibration_cmd cmd; - data->radio_write = 1; - - memset(&cmd, 0, sizeof(cmd)); - cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD; - cmd.diff_gain_a = data->delta_gain_code[0]; - cmd.diff_gain_b = data->delta_gain_code[1]; - cmd.diff_gain_c = data->delta_gain_code[2]; - ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, - sizeof(cmd), &cmd); - if (ret) - IWL_DEBUG_CALIB("fail sending cmd " - "REPLY_PHY_CALIBRATION_CMD \n"); - - /* TODO we might want recalculate - * rx_chain in rxon cmd */ - - /* Mark so we run this algo only once! */ - data->state = IWL_CHAIN_NOISE_CALIBRATED; + delta_g = average_noise[i] - min_average_noise; + data->delta_gain_code[i] = (u8)((delta_g * 10) / 15); + data->delta_gain_code[i] = + min(data->delta_gain_code[i], + (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + + data->delta_gain_code[i] = + (data->delta_gain_code[i] | (1 << 2)); + } else { + data->delta_gain_code[i] = 0; } - data->chain_noise_a = 0; - data->chain_noise_b = 0; - data->chain_noise_c = 0; - data->chain_signal_a = 0; - data->chain_signal_b = 0; - data->chain_signal_c = 0; - data->beacon_count = 0; - } - return; -} - -static void iwl4965_sensitivity_calibration(struct iwl_priv *priv, - struct iwl4965_notif_statistics *resp) -{ - u32 rx_enable_time; - u32 fa_cck; - u32 fa_ofdm; - u32 bad_plcp_cck; - u32 bad_plcp_ofdm; - u32 norm_fa_ofdm; - u32 norm_fa_cck; - struct iwl4965_sensitivity_data *data = NULL; - struct statistics_rx_non_phy *rx_info = &(resp->rx.general); - struct statistics_rx *statistics = &(resp->rx); - unsigned long flags; - struct statistics_general_data statis; - int ret; - - data = &(priv->sensitivity_data); - - if (!iwl_is_associated(priv)) { - IWL_DEBUG_CALIB("<< - not associated\n"); - return; } + IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n", + data->delta_gain_code[0], + data->delta_gain_code[1], + data->delta_gain_code[2]); - spin_lock_irqsave(&priv->lock, flags); - if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { - IWL_DEBUG_CALIB("<< invalid data.\n"); - spin_unlock_irqrestore(&priv->lock, flags); - return; - } - - /* Extract Statistics: */ - rx_enable_time = le32_to_cpu(rx_info->channel_load); - fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt); - fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt); - bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err); - bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err); - - statis.beacon_silence_rssi_a = - le32_to_cpu(statistics->general.beacon_silence_rssi_a); - statis.beacon_silence_rssi_b = - le32_to_cpu(statistics->general.beacon_silence_rssi_b); - statis.beacon_silence_rssi_c = - le32_to_cpu(statistics->general.beacon_silence_rssi_c); - statis.beacon_energy_a = - le32_to_cpu(statistics->general.beacon_energy_a); - statis.beacon_energy_b = - le32_to_cpu(statistics->general.beacon_energy_b); - statis.beacon_energy_c = - le32_to_cpu(statistics->general.beacon_energy_c); - - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time); - - if (!rx_enable_time) { - IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n"); - return; - } - - /* These statistics increase monotonically, and do not reset - * at each beacon. Calculate difference from last value, or just - * use the new statistics value if it has reset or wrapped around. */ - if (data->last_bad_plcp_cnt_cck > bad_plcp_cck) - data->last_bad_plcp_cnt_cck = bad_plcp_cck; - else { - bad_plcp_cck -= data->last_bad_plcp_cnt_cck; - data->last_bad_plcp_cnt_cck += bad_plcp_cck; - } - - if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm) - data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm; - else { - bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm; - data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm; - } - - if (data->last_fa_cnt_ofdm > fa_ofdm) - data->last_fa_cnt_ofdm = fa_ofdm; - else { - fa_ofdm -= data->last_fa_cnt_ofdm; - data->last_fa_cnt_ofdm += fa_ofdm; - } + /* Differential gain gets sent to uCode only once */ + if (!data->radio_write) { + struct iwl4965_calibration_cmd cmd; + data->radio_write = 1; - if (data->last_fa_cnt_cck > fa_cck) - data->last_fa_cnt_cck = fa_cck; - else { - fa_cck -= data->last_fa_cnt_cck; - data->last_fa_cnt_cck += fa_cck; + memset(&cmd, 0, sizeof(cmd)); + cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD; + cmd.diff_gain_a = data->delta_gain_code[0]; + cmd.diff_gain_b = data->delta_gain_code[1]; + cmd.diff_gain_c = data->delta_gain_code[2]; + ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd); + if (ret) + IWL_DEBUG_CALIB("fail sending cmd " + "REPLY_PHY_CALIBRATION_CMD \n"); + + /* TODO we might want recalculate + * rx_chain in rxon cmd */ + + /* Mark so we run this algo only once! */ + data->state = IWL_CHAIN_NOISE_CALIBRATED; } - - /* Total aborted signal locks */ - norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm; - norm_fa_cck = fa_cck + bad_plcp_cck; - - IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck, - bad_plcp_cck, fa_ofdm, bad_plcp_ofdm); - - iwl4965_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time); - iwl4965_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis); - ret = iwl4965_sensitivity_write(priv, CMD_ASYNC); - - return; + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; } static void iwl4965_bg_sensitivity_work(struct work_struct *work) @@ -1819,21 +929,15 @@ static void iwl4965_bg_sensitivity_work(struct work_struct *work) } if (priv->start_calib) { - iwl4965_noise_calibration(priv, &priv->statistics); - - if (priv->sensitivity_data.state == - IWL_SENS_CALIB_NEED_REINIT) { - iwl4965_init_sensitivity(priv, CMD_ASYNC, 0); - priv->sensitivity_data.state = IWL_SENS_CALIB_ALLOWED; - } else - iwl4965_sensitivity_calibration(priv, - &priv->statistics); + iwl_chain_noise_calibration(priv, &priv->statistics); + + iwl_sensitivity_calibration(priv, &priv->statistics); } mutex_unlock(&priv->mutex); return; } -#endif /*CONFIG_IWL4965_SENSITIVITY*/ +#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/ static void iwl4965_bg_txpower_work(struct work_struct *work) { @@ -1890,11 +994,11 @@ static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, /* Set up and activate */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (active << SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) | - (scd_retry << SCD_QUEUE_STTS_REG_POS_WSL) | - (scd_retry << SCD_QUEUE_STTS_REG_POS_SCD_ACK) | - SCD_QUEUE_STTS_REG_MSK); + (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | + (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | + (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | + (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | + IWL49_SCD_QUEUE_STTS_REG_MSK); txq->sched_retry = scd_retry; @@ -1908,7 +1012,7 @@ static const u16 default_queue_to_tx_fifo[] = { IWL_TX_FIFO_AC2, IWL_TX_FIFO_AC1, IWL_TX_FIFO_AC0, - IWL_CMD_FIFO_NUM, + IWL49_CMD_FIFO_NUM, IWL_TX_FIFO_HCCA_1, IWL_TX_FIFO_HCCA_2 }; @@ -1932,15 +1036,15 @@ int iwl4965_alive_notify(struct iwl_priv *priv) spin_lock_irqsave(&priv->lock, flags); -#ifdef CONFIG_IWL4965_SENSITIVITY +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB memset(&(priv->sensitivity_data), 0, - sizeof(struct iwl4965_sensitivity_data)); + sizeof(struct iwl_sensitivity_data)); memset(&(priv->chain_noise_data), 0, - sizeof(struct iwl4965_chain_noise_data)); + sizeof(struct iwl_chain_noise_data)); for (i = 0; i < NUM_RX_CHAINS; i++) priv->chain_noise_data.delta_gain_code[i] = CHAIN_NOISE_DELTA_GAIN_INIT_VAL; -#endif /* CONFIG_IWL4965_SENSITIVITY*/ +#endif /* CONFIG_IWL4965_RUN_TIME_CALIB*/ ret = iwl_grab_nic_access(priv); if (ret) { spin_unlock_irqrestore(&priv->lock, flags); @@ -1949,10 +1053,10 @@ int iwl4965_alive_notify(struct iwl_priv *priv) /* Clear 4965's internal Tx Scheduler data base */ priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR); - a = priv->scd_base_addr + SCD_CONTEXT_DATA_OFFSET; - for (; a < priv->scd_base_addr + SCD_TX_STTS_BITMAP_OFFSET; a += 4) + a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; + for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); - for (; a < priv->scd_base_addr + SCD_TRANSLATE_TBL_OFFSET; a += 4) + for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) iwl_write_targ_mem(priv, a, 0); for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4) iwl_write_targ_mem(priv, a, 0); @@ -1974,18 +1078,18 @@ int iwl4965_alive_notify(struct iwl_priv *priv) /* Max Tx Window size for Scheduler-ACK mode */ iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i), - (SCD_WIN_SIZE << - SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), + (SCD_WIN_SIZE << + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); /* Frame limit */ iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i) + - sizeof(u32), - (SCD_FRAME_LIMIT << - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + + sizeof(u32), + (SCD_FRAME_LIMIT << + IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & + IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); } iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, @@ -2013,6 +1117,31 @@ int iwl4965_alive_notify(struct iwl_priv *priv) return ret; } +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB +static struct iwl_sensitivity_ranges iwl4965_sensitivity = { + .min_nrg_cck = 97, + .max_nrg_cck = 0, + + .auto_corr_min_ofdm = 85, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 140, + .auto_corr_max_ofdm_mrc_x1 = 270, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 200, + .auto_corr_max_cck_mrc = 400, + + .nrg_th_cck = 100, + .nrg_th_ofdm = 100, +}; +#endif + /** * iwl4965_hw_set_hw_params * @@ -2021,14 +1150,15 @@ int iwl4965_alive_notify(struct iwl_priv *priv) int iwl4965_hw_set_hw_params(struct iwl_priv *priv) { - if ((priv->cfg->mod_params->num_of_queues > IWL4965_MAX_NUM_QUEUES) || + if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) || (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { IWL_ERROR("invalid queues_num, should be between %d and %d\n", - IWL_MIN_NUM_QUEUES, IWL4965_MAX_NUM_QUEUES); + IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES); return -EINVAL; } priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues; + priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto; priv->hw_params.tx_cmd_len = sizeof(struct iwl4965_tx_cmd); priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; @@ -2040,10 +1170,20 @@ int iwl4965_hw_set_hw_params(struct iwl_priv *priv) priv->hw_params.max_stations = IWL4965_STATION_COUNT; priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID; + priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE; + priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; + priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ); + priv->hw_params.tx_chains_num = 2; priv->hw_params.rx_chains_num = 2; - priv->hw_params.valid_tx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX); - priv->hw_params.valid_rx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX); + priv->hw_params.valid_tx_ant = ANT_A | ANT_B; + priv->hw_params.valid_rx_ant = ANT_A | ANT_B; + priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD); + +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB + priv->hw_params.sens = &iwl4965_sensitivity; +#endif return 0; } @@ -2124,6 +1264,17 @@ int iwl4965_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl4965_tx_queue *txq) return 0; } +/* set card power command */ +static int iwl4965_set_power(struct iwl_priv *priv, + void *cmd) +{ + int ret = 0; + + ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, + sizeof(struct iwl4965_powertable_cmd), + cmd, NULL); + return ret; +} int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power) { IWL_ERROR("TODO: Implement iwl4965_hw_reg_set_txpower!\n"); @@ -2224,11 +1375,11 @@ static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel) s32 b = -1; for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { - if (priv->eeprom.calib_info.band_info[b].ch_from == 0) + if (priv->calib_info->band_info[b].ch_from == 0) continue; - if ((channel >= priv->eeprom.calib_info.band_info[b].ch_from) - && (channel <= priv->eeprom.calib_info.band_info[b].ch_to)) + if ((channel >= priv->calib_info->band_info[b].ch_from) + && (channel <= priv->calib_info->band_info[b].ch_to)) break; } @@ -2256,14 +1407,14 @@ static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) * in channel number. */ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, - struct iwl4965_eeprom_calib_ch_info *chan_info) + struct iwl_eeprom_calib_ch_info *chan_info) { s32 s = -1; u32 c; u32 m; - const struct iwl4965_eeprom_calib_measure *m1; - const struct iwl4965_eeprom_calib_measure *m2; - struct iwl4965_eeprom_calib_measure *omeas; + const struct iwl_eeprom_calib_measure *m1; + const struct iwl_eeprom_calib_measure *m2; + struct iwl_eeprom_calib_measure *omeas; u32 ch_i1; u32 ch_i2; @@ -2273,8 +1424,8 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, return -1; } - ch_i1 = priv->eeprom.calib_info.band_info[s].ch1.ch_num; - ch_i2 = priv->eeprom.calib_info.band_info[s].ch2.ch_num; + ch_i1 = priv->calib_info->band_info[s].ch1.ch_num; + ch_i2 = priv->calib_info->band_info[s].ch2.ch_num; chan_info->ch_num = (u8) channel; IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n", @@ -2282,9 +1433,9 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { - m1 = &(priv->eeprom.calib_info.band_info[s].ch1. + m1 = &(priv->calib_info->band_info[s].ch1. measurements[c][m]); - m2 = &(priv->eeprom.calib_info.band_info[s].ch2. + m2 = &(priv->calib_info->band_info[s].ch2. measurements[c][m]); omeas = &(chan_info->measurements[c][m]); @@ -2603,8 +1754,8 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, int i; int c; const struct iwl_channel_info *ch_info = NULL; - struct iwl4965_eeprom_calib_ch_info ch_eeprom_info; - const struct iwl4965_eeprom_calib_measure *measurement; + struct iwl_eeprom_calib_ch_info ch_eeprom_info; + const struct iwl_eeprom_calib_measure *measurement; s16 voltage; s32 init_voltage; s32 voltage_compensation; @@ -2661,9 +1812,9 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, /* hardware txpower limits ... * saturation (clipping distortion) txpowers are in half-dBm */ if (band) - saturation_power = priv->eeprom.calib_info.saturation_power24; + saturation_power = priv->calib_info->saturation_power24; else - saturation_power = priv->eeprom.calib_info.saturation_power52; + saturation_power = priv->calib_info->saturation_power52; if (saturation_power < IWL_TX_POWER_SATURATION_MIN || saturation_power > IWL_TX_POWER_SATURATION_MAX) { @@ -2693,7 +1844,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); /* calculate tx gain adjustment based on power supply voltage */ - voltage = priv->eeprom.calib_info.voltage; + voltage = priv->calib_info->voltage; init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); voltage_compensation = iwl4965_get_voltage_compensation(voltage, init_voltage); @@ -3104,9 +2255,9 @@ int iwl4965_hw_tx_queue_init(struct iwl_priv *priv, struct iwl4965_tx_queue *txq /* Enable DMA channel, using same id as for TFD queue */ iwl_write_direct32( - priv, IWL_FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), - IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL); + priv, FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL); iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); @@ -3149,18 +2300,37 @@ int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, static void iwl4965_hw_card_show_info(struct iwl_priv *priv) { - u16 hw_version = priv->eeprom.board_revision_4965; + u16 hw_version = iwl_eeprom_query16(priv, EEPROM_4965_BOARD_REVISION); IWL_DEBUG_INFO("4965ABGN HW Version %u.%u.%u\n", ((hw_version >> 8) & 0x0F), ((hw_version >> 8) >> 4), (hw_version & 0x00FF)); IWL_DEBUG_INFO("4965ABGN PBA Number %.16s\n", - priv->eeprom.board_pba_number_4965); + &priv->eeprom[EEPROM_4965_BOARD_PBA]); } -#define IWL_TX_CRC_SIZE 4 -#define IWL_TX_DELIMITER_SIZE 4 +static int iwl4965_alloc_shared_mem(struct iwl_priv *priv) +{ + priv->shared_virt = pci_alloc_consistent(priv->pci_dev, + sizeof(struct iwl4965_shared), + &priv->shared_phys); + if (!priv->shared_virt) + return -ENOMEM; + + memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared)); + + return 0; +} + +static void iwl4965_free_shared_mem(struct iwl_priv *priv) +{ + if (priv->shared_virt) + pci_free_consistent(priv->pci_dev, + sizeof(struct iwl4965_shared), + priv->shared_virt, + priv->shared_phys); +} /** * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array @@ -3180,50 +2350,13 @@ static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, tfd_offset[txq->q.write_ptr], byte_cnt, len); /* If within first 64 entries, duplicate at end */ - if (txq->q.write_ptr < IWL4965_MAX_WIN_SIZE) + if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE) IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. - tfd_offset[IWL4965_QUEUE_SIZE + txq->q.write_ptr], + tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr], byte_cnt, len); } /** - * iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void iwl4965_set_rxon_chain(struct iwl_priv *priv) -{ - u8 is_single = is_single_stream(priv); - u8 idle_state, rx_state; - - priv->staging_rxon.rx_chain = 0; - rx_state = idle_state = 3; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, iwl4965_noise_calibration() - * checks which antennas actually *are* connected. */ - priv->staging_rxon.rx_chain |= - cpu_to_le16(priv->valid_antenna << RXON_RX_CHAIN_VALID_POS); - - /* How many receivers should we use? */ - iwl4965_get_rx_chain_counter(priv, &idle_state, &rx_state); - priv->staging_rxon.rx_chain |= - cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); - priv->staging_rxon.rx_chain |= - cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); - - if (!is_single && (rx_state >= 2) && - !test_bit(STATUS_POWER_PMI, &priv->status)) - priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); -} - -/** * sign_extend - Sign extend a value using specified bit as sign-bit * * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1 @@ -3412,7 +2545,7 @@ void iwl4965_hw_rx_statistics(struct iwl_priv *priv, struct iwl4965_rx_mem_buffe if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { iwl4965_rx_calc_noise(priv); -#ifdef CONFIG_IWL4965_SENSITIVITY +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB queue_work(priv->workqueue, &priv->sensitivity_work); #endif } @@ -3562,6 +2695,53 @@ static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) priv->rx_stats[idx].bytes += len; } +/* + * returns non-zero if packet should be dropped + */ +static int iwl4965_set_decrypted_flag(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + u32 decrypt_res, + struct ieee80211_rx_status *stats) +{ + u16 fc = le16_to_cpu(hdr->frame_control); + + if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) + return 0; + + if (!(fc & IEEE80211_FCTL_PROTECTED)) + return 0; + + IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); + switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { + case RX_RES_STATUS_SEC_TYPE_TKIP: + /* The uCode has got a bad phase 1 Key, pushes the packet. + * Decryption will be done in SW. */ + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_BAD_KEY_TTAK) + break; + + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_BAD_ICV_MIC) { + /* bad ICV, the packet is destroyed since the + * decryption is inplace, drop it */ + IWL_DEBUG_RX("Packet destroyed\n"); + return -1; + } + case RX_RES_STATUS_SEC_TYPE_WEP: + case RX_RES_STATUS_SEC_TYPE_CCMP: + if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == + RX_RES_STATUS_DECRYPT_OK) { + IWL_DEBUG_RX("hw decrypt successfully!!!\n"); + stats->flag |= RX_FLAG_DECRYPTED; + } + break; + + default: + break; + } + return 0; +} + static u32 iwl4965_translate_rx_status(u32 decrypt_in) { u32 decrypt_out = 0; @@ -3691,8 +2871,10 @@ static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data, stats->flag = 0; hdr = (struct ieee80211_hdr *)rxb->skb->data; - if (!priv->cfg->mod_params->sw_crypto) - iwl4965_set_decrypted_flag(priv, rxb->skb, ampdu_status, stats); + /* in case of HW accelerated crypto and bad decryption, drop */ + if (!priv->hw_params.sw_crypto && + iwl4965_set_decrypted_flag(priv, hdr, ampdu_status, stats)) + return; if (priv->add_radiotap) iwl4965_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); @@ -3737,38 +2919,6 @@ static int iwl4965_calc_rssi(struct iwl4965_rx_phy_res *rx_resp) return (max_rssi - agc - IWL_RSSI_OFFSET); } -#ifdef CONFIG_IWL4965_HT - -void iwl4965_init_ht_hw_capab(struct iwl_priv *priv, - struct ieee80211_ht_info *ht_info, - enum ieee80211_band band) -{ - ht_info->cap = 0; - memset(ht_info->supp_mcs_set, 0, 16); - - ht_info->ht_supported = 1; - - if (band == IEEE80211_BAND_5GHZ) { - ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH; - ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40; - ht_info->supp_mcs_set[4] = 0x01; - } - ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; - ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; - ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & - (IWL_MIMO_PS_NONE << 2)); - - if (priv->cfg->mod_params->amsdu_size_8K) - ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU; - - ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; - ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; - - ht_info->supp_mcs_set[0] = 0xFF; - ht_info->supp_mcs_set[1] = 0xFF; -} -#endif /* CONFIG_IWL4965_HT */ - static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) { unsigned long flags; @@ -3786,7 +2936,7 @@ static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) static void iwl4965_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) { /* FIXME: need locking over ps_status ??? */ - u8 sta_id = iwl4965_hw_find_station(priv, addr); + u8 sta_id = iwl_find_station(priv, addr); if (sta_id != IWL_INVALID_STATION) { u8 sta_awake = priv->stations[sta_id]. @@ -4139,7 +3289,7 @@ static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv, struct iwl4965_rx_mem_buffer *rxb) { -#ifdef CONFIG_IWL4965_SENSITIVITY +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data; struct iwl4965_missed_beacon_notif *missed_beacon; @@ -4150,11 +3300,10 @@ static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv, le32_to_cpu(missed_beacon->total_missed_becons), le32_to_cpu(missed_beacon->num_recvd_beacons), le32_to_cpu(missed_beacon->num_expected_beacons)); - priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; - if (unlikely(!test_bit(STATUS_SCANNING, &priv->status))) - queue_work(priv->workqueue, &priv->sensitivity_work); + if (!test_bit(STATUS_SCANNING, &priv->status)) + iwl_init_sensitivity(priv); } -#endif /*CONFIG_IWL4965_SENSITIVITY*/ +#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/ } #ifdef CONFIG_IWL4965_HT @@ -4254,8 +3403,8 @@ static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv, * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)| - (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); + (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)| + (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); } /** @@ -4420,10 +3569,10 @@ static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, u32 tbl_dw; u16 scd_q2ratid; - scd_q2ratid = ra_tid & SCD_QUEUE_RA_TID_MAP_RATID_MSK; + scd_q2ratid = ra_tid & IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK; tbl_dw_addr = priv->scd_base_addr + - SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); + IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr); @@ -4485,14 +3634,14 @@ static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id, /* Set up Tx window size and frame limit for this queue */ iwl_write_targ_mem(priv, - priv->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id), - (SCD_WIN_SIZE << SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); + priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), + (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & + IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); iwl_write_targ_mem(priv, priv->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), - (SCD_FRAME_LIMIT << SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) - & SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), + (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) + & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); @@ -4544,8 +3693,7 @@ void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) rate_flags |= RATE_MCS_CCK_MSK; /* Use Tx antenna B only */ - rate_flags |= RATE_MCS_ANT_B_MSK; - rate_flags &= ~RATE_MCS_ANT_A_MSK; + rate_flags |= RATE_MCS_ANT_B_MSK; /*FIXME:RS*/ link_cmd.rs_table[i].rate_n_flags = iwl4965_hw_set_rate_n_flags(iwl4965_rates[r].plcp, rate_flags); @@ -4648,13 +3796,15 @@ void iwl4965_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS); - iwl4965_set_rxon_chain(priv); + iwl_set_rxon_chain(priv); - IWL_DEBUG_ASSOC("supported HT rate 0x%X %X " + IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X " "rxon flags 0x%X operation mode :0x%X " "extension channel offset 0x%x " "control chan %d\n", - ht_info->supp_mcs_set[0], ht_info->supp_mcs_set[1], + ht_info->supp_mcs_set[0], + ht_info->supp_mcs_set[1], + ht_info->supp_mcs_set[2], le32_to_cpu(rxon->flags), ht_info->ht_protection, ht_info->extension_chan_offset, ht_info->control_channel); @@ -4706,10 +3856,15 @@ void iwl4965_set_ht_add_station(struct iwl_priv *priv, u8 index, return; } -static void iwl4965_sta_modify_add_ba_tid(struct iwl_priv *priv, - int sta_id, int tid, u16 ssn) +static int iwl4965_rx_agg_start(struct iwl_priv *priv, + const u8 *addr, int tid, u16 ssn) { unsigned long flags; + int sta_id; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; spin_lock_irqsave(&priv->sta_lock, flags); priv->stations[sta_id].sta.station_flags_msk = 0; @@ -4719,13 +3874,19 @@ static void iwl4965_sta_modify_add_ba_tid(struct iwl_priv *priv, priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; spin_unlock_irqrestore(&priv->sta_lock, flags); - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, + CMD_ASYNC); } -static void iwl4965_sta_modify_del_ba_tid(struct iwl_priv *priv, - int sta_id, int tid) +static int iwl4965_rx_agg_stop(struct iwl_priv *priv, + const u8 *addr, int tid) { unsigned long flags; + int sta_id; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; spin_lock_irqsave(&priv->sta_lock, flags); priv->stations[sta_id].sta.station_flags_msk = 0; @@ -4734,7 +3895,8 @@ static void iwl4965_sta_modify_del_ba_tid(struct iwl_priv *priv, priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; spin_unlock_irqrestore(&priv->sta_lock, flags); - iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, + CMD_ASYNC); } /* @@ -4753,8 +3915,8 @@ static int iwl4965_txq_ctx_activate_free(struct iwl_priv *priv) return -1; } -static int iwl4965_mac_ht_tx_agg_start(struct ieee80211_hw *hw, const u8 *da, - u16 tid, u16 *start_seq_num) +static int iwl4965_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra, + u16 tid, u16 *start_seq_num) { struct iwl_priv *priv = hw->priv; int sta_id; @@ -4771,10 +3933,10 @@ static int iwl4965_mac_ht_tx_agg_start(struct ieee80211_hw *hw, const u8 *da, else return -EINVAL; - IWL_WARNING("%s on da = %s tid = %d\n", - __func__, print_mac(mac, da), tid); + IWL_WARNING("%s on ra = %s tid = %d\n", + __func__, print_mac(mac, ra), tid); - sta_id = iwl4965_hw_find_station(priv, da); + sta_id = iwl_find_station(priv, ra); if (sta_id == IWL_INVALID_STATION) return -ENXIO; @@ -4803,7 +3965,7 @@ static int iwl4965_mac_ht_tx_agg_start(struct ieee80211_hw *hw, const u8 *da, if (tid_data->tfds_in_queue == 0) { printk(KERN_ERR "HW queue is empty\n"); tid_data->agg.state = IWL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(hw, da, tid); + ieee80211_start_tx_ba_cb_irqsafe(hw, ra, tid); } else { IWL_DEBUG_HT("HW queue is NOT empty: %d packets in HW queue\n", tid_data->tfds_in_queue); @@ -4812,10 +3974,8 @@ static int iwl4965_mac_ht_tx_agg_start(struct ieee80211_hw *hw, const u8 *da, return ret; } -static int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, const u8 *da, - u16 tid) +static int iwl4965_tx_agg_stop(struct ieee80211_hw *hw, const u8 *ra, u16 tid) { - struct iwl_priv *priv = hw->priv; int tx_fifo_id, txq_id, sta_id, ssn = -1; struct iwl4965_tid_data *tid_data; @@ -4823,8 +3983,8 @@ static int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, const u8 *da, unsigned long flags; DECLARE_MAC_BUF(mac); - if (!da) { - IWL_ERROR("da = NULL\n"); + if (!ra) { + IWL_ERROR("ra = NULL\n"); return -EINVAL; } @@ -4833,7 +3993,7 @@ static int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, const u8 *da, else return -EINVAL; - sta_id = iwl4965_hw_find_station(priv, da); + sta_id = iwl_find_station(priv, ra); if (sta_id == IWL_INVALID_STATION) return -ENXIO; @@ -4855,7 +4015,7 @@ static int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, const u8 *da, return 0; } - IWL_DEBUG_HT("HW queue empty\n");; + IWL_DEBUG_HT("HW queue is empty\n"); priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; spin_lock_irqsave(&priv->lock, flags); @@ -4865,10 +4025,7 @@ static int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, const u8 *da, if (ret) return ret; - ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, da, tid); - - IWL_DEBUG_INFO("iwl4965_mac_ht_tx_agg_stop on da=%s tid=%d\n", - print_mac(mac, da), tid); + ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid); return 0; } @@ -4878,27 +4035,24 @@ int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, const u8 *addr, u16 tid, u16 *ssn) { struct iwl_priv *priv = hw->priv; - int sta_id; DECLARE_MAC_BUF(mac); - IWL_DEBUG_HT("A-MPDU action on da=%s tid=%d ", - print_mac(mac, addr), tid); - sta_id = iwl4965_hw_find_station(priv, addr); + IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", + print_mac(mac, addr), tid); + switch (action) { case IEEE80211_AMPDU_RX_START: IWL_DEBUG_HT("start Rx\n"); - iwl4965_sta_modify_add_ba_tid(priv, sta_id, tid, *ssn); - break; + return iwl4965_rx_agg_start(priv, addr, tid, *ssn); case IEEE80211_AMPDU_RX_STOP: IWL_DEBUG_HT("stop Rx\n"); - iwl4965_sta_modify_del_ba_tid(priv, sta_id, tid); - break; + return iwl4965_rx_agg_stop(priv, addr, tid); case IEEE80211_AMPDU_TX_START: IWL_DEBUG_HT("start Tx\n"); - return iwl4965_mac_ht_tx_agg_start(hw, addr, tid, ssn); + return iwl4965_tx_agg_start(hw, addr, tid, ssn); case IEEE80211_AMPDU_TX_STOP: IWL_DEBUG_HT("stop Tx\n"); - return iwl4965_mac_ht_tx_agg_stop(hw, addr, tid); + return iwl4965_tx_agg_stop(hw, addr, tid); default: IWL_DEBUG_HT("unknown\n"); return -EINVAL; @@ -4910,7 +4064,7 @@ int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, #endif /* CONFIG_IWL4965_HT */ /* Set up 4965-specific Rx frame reply handlers */ -void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv) +static void iwl4965_rx_handler_setup(struct iwl_priv *priv) { /* Legacy Rx frames */ priv->rx_handlers[REPLY_RX] = iwl4965_rx_reply_rx; @@ -4930,7 +4084,7 @@ void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv) void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv) { INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work); -#ifdef CONFIG_IWL4965_SENSITIVITY +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work); #endif init_timer(&priv->statistics_periodic); @@ -4952,22 +4106,46 @@ static struct iwl_hcmd_ops iwl4965_hcmd = { static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { .enqueue_hcmd = iwl4965_enqueue_hcmd, +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB + .chain_noise_reset = iwl4965_chain_noise_reset, + .gain_computation = iwl4965_gain_computation, +#endif }; static struct iwl_lib_ops iwl4965_lib = { - .init_drv = iwl4965_init_drv, .set_hw_params = iwl4965_hw_set_hw_params, + .alloc_shared_mem = iwl4965_alloc_shared_mem, + .free_shared_mem = iwl4965_free_shared_mem, .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl, .hw_nic_init = iwl4965_hw_nic_init, + .rx_handler_setup = iwl4965_rx_handler_setup, .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, .alive_notify = iwl4965_alive_notify, .load_ucode = iwl4965_load_bsm, + .apm_ops = { + .init = iwl4965_apm_init, + .config = iwl4965_nic_config, + .set_pwr_src = iwl4965_set_pwr_src, + }, .eeprom_ops = { + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS, + EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS + }, .verify_signature = iwlcore_eeprom_verify_signature, .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, .release_semaphore = iwlcore_eeprom_release_semaphore, + .check_version = iwl4965_eeprom_check_version, + .query_addr = iwlcore_eeprom_query_addr, }, .radio_kill_sw = iwl4965_radio_kill_sw, + .set_power = iwl4965_set_power, + .update_chain_flags = iwl4965_update_chain_flags, }; static struct iwl_ops iwl4965_ops = { @@ -4980,6 +4158,7 @@ struct iwl_cfg iwl4965_agn_cfg = { .name = "4965AGN", .fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode", .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .eeprom_size = IWL4965_EEPROM_IMG_SIZE, .ops = &iwl4965_ops, .mod_params = &iwl4965_mod_params, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h new file mode 100644 index 00000000000..9e557ce315b --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -0,0 +1,133 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +/* + * Please use this file (iwl-5000-hw.h) only for hardware-related definitions. + * Use iwl-5000-commands.h for uCode API definitions. + */ + +#ifndef __iwl_5000_hw_h__ +#define __iwl_5000_hw_h__ + +#define IWL50_RTC_INST_UPPER_BOUND (0x020000) +#define IWL50_RTC_DATA_UPPER_BOUND (0x80C000) +#define IWL50_RTC_INST_SIZE (IWL50_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND) +#define IWL50_RTC_DATA_SIZE (IWL50_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND) + +/* EERPROM */ +#define IWL_5000_EEPROM_IMG_SIZE 2048 + + +#define IWL50_MAX_WIN_SIZE 64 +#define IWL50_QUEUE_SIZE 256 +#define IWL50_CMD_FIFO_NUM 7 +#define IWL50_NUM_QUEUES 20 +#define IWL50_BACK_QUEUE_FIRST_ID 10 + +#define IWL_sta_id_POS 12 +#define IWL_sta_id_LEN 4 +#define IWL_sta_id_SYM val + +/* Fixed (non-configurable) rx data from phy */ + +/* Base physical address of iwl5000_shared is provided to SCD_DRAM_BASE_ADDR + * and &iwl5000_shared.val0 is provided to FH_RSCSR_CHNL0_STTS_WPTR_REG */ +struct iwl5000_sched_queue_byte_cnt_tbl { + struct iwl4965_queue_byte_cnt_entry tfd_offset[IWL50_QUEUE_SIZE + + IWL50_MAX_WIN_SIZE]; +} __attribute__ ((packed)); + +struct iwl5000_shared { + struct iwl5000_sched_queue_byte_cnt_tbl + queues_byte_cnt_tbls[IWL50_NUM_QUEUES]; + __le32 rb_closed; + + /* __le32 rb_closed_stts_rb_num:12; */ +#define IWL_rb_closed_stts_rb_num_POS 0 +#define IWL_rb_closed_stts_rb_num_LEN 12 +#define IWL_rb_closed_stts_rb_num_SYM rb_closed + /* __le32 rsrv1:4; */ + /* __le32 rb_closed_stts_rx_frame_num:12; */ +#define IWL_rb_closed_stts_rx_frame_num_POS 16 +#define IWL_rb_closed_stts_rx_frame_num_LEN 12 +#define IWL_rb_closed_stts_rx_frame_num_SYM rb_closed + /* __le32 rsrv2:4; */ + + __le32 frm_finished; + /* __le32 frame_finished_stts_rb_num:12; */ +#define IWL_frame_finished_stts_rb_num_POS 0 +#define IWL_frame_finished_stts_rb_num_LEN 12 +#define IWL_frame_finished_stts_rb_num_SYM frm_finished + /* __le32 rsrv3:4; */ + /* __le32 frame_finished_stts_rx_frame_num:12; */ +#define IWL_frame_finished_stts_rx_frame_num_POS 16 +#define IWL_frame_finished_stts_rx_frame_num_LEN 12 +#define IWL_frame_finished_stts_rx_frame_num_SYM frm_finished + /* __le32 rsrv4:4; */ + + __le32 padding1; /* so that allocation will be aligned to 16B */ + __le32 padding2; +} __attribute__ ((packed)); + + +#endif /* __iwl_5000_hw_h__ */ + diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c new file mode 100644 index 00000000000..0d8ef63f871 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -0,0 +1,519 @@ +/****************************************************************************** + * + * Copyright(c) 2007-2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/mac80211.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-helpers.h" +#include "iwl-5000-hw.h" + +#define IWL5000_UCODE_API "-1" + +static int iwl5000_apm_init(struct iwl_priv *priv) +{ + int ret = 0; + + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); + + /* set "initialization complete" bit to move adapter + * D0U* --> D0A* state */ + iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + /* wait for clock stabilization */ + ret = iwl_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (ret < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + return ret; + } + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + /* enable DMA */ + iwl_write_prph(priv, APMG_CLK_EN_REG, + APMG_CLK_VAL_DMA_CLK_RQT); + + udelay(20); + + iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + + iwl_release_nic_access(priv); + + return ret; +} + +static void iwl5000_nic_init(struct iwl_priv *priv) +{ + unsigned long flags; + u16 radio_cfg; + u8 val_link; + + spin_lock_irqsave(&priv->lock, flags); + + pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); + + /* disable L1 entry -- workaround for pre-B1 */ + pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02); + + radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); + + /* write radio config values to register */ + if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_5000_RF_CFG_TYPE_MAX) + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | + EEPROM_RF_CFG_STEP_MSK(radio_cfg) | + EEPROM_RF_CFG_DASH_MSK(radio_cfg)); + + /* set CSR_HW_CONFIG_REG for uCode use */ + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | + CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + + spin_unlock_irqrestore(&priv->lock, flags); +} + + + +/* + * EEPROM + */ +static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address) +{ + u16 offset = 0; + + if ((address & INDIRECT_ADDRESS) == 0) + return address; + + switch (address & INDIRECT_TYPE_MSK) { + case INDIRECT_HOST: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_HOST); + break; + case INDIRECT_GENERAL: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_GENERAL); + break; + case INDIRECT_REGULATORY: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_REGULATORY); + break; + case INDIRECT_CALIBRATION: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_CALIBRATION); + break; + case INDIRECT_PROCESS_ADJST: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_PROCESS_ADJST); + break; + case INDIRECT_OTHERS: + offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_OTHERS); + break; + default: + IWL_ERROR("illegal indirect type: 0x%X\n", + address & INDIRECT_TYPE_MSK); + break; + } + + /* translate the offset from words to byte */ + return (address & ADDRESS_MSK) + (offset << 1); +} + +static int iwl5000_eeprom_check_version(struct iwl_priv *priv) +{ + u16 eeprom_ver; + struct iwl_eeprom_calib_hdr { + u8 version; + u8 pa_type; + u16 voltage; + } *hdr; + + eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); + + hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv, + EEPROM_5000_CALIB_ALL); + + if (eeprom_ver < EEPROM_5000_EEPROM_VERSION || + hdr->version < EEPROM_5000_TX_POWER_VERSION) + goto err; + + return 0; +err: + IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", + eeprom_ver, EEPROM_5000_EEPROM_VERSION, + hdr->version, EEPROM_5000_TX_POWER_VERSION); + return -EINVAL; + +} + +#ifdef CONFIG_IWL5000_RUN_TIME_CALIB + +static void iwl5000_gain_computation(struct iwl_priv *priv, + u32 average_noise[NUM_RX_CHAINS], + u16 min_average_noise_antenna_i, + u32 min_average_noise) +{ + int i; + s32 delta_g; + struct iwl_chain_noise_data *data = &priv->chain_noise_data; + + /* Find Gain Code for the antennas B and C */ + for (i = 1; i < NUM_RX_CHAINS; i++) { + if ((data->disconn_array[i])) { + data->delta_gain_code[i] = 0; + continue; + } + delta_g = (1000 * ((s32)average_noise[0] - + (s32)average_noise[i])) / 1500; + /* bound gain by 2 bits value max, 3rd bit is sign */ + data->delta_gain_code[i] = + min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE); + + if (delta_g < 0) + /* set negative sign */ + data->delta_gain_code[i] |= (1 << 2); + } + + IWL_DEBUG_CALIB("Delta gains: ANT_B = %d ANT_C = %d\n", + data->delta_gain_code[1], data->delta_gain_code[2]); + + if (!data->radio_write) { + struct iwl5000_calibration_chain_noise_gain_cmd cmd; + memset(&cmd, 0, sizeof(cmd)); + + cmd.op_code = IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD; + cmd.delta_gain_1 = data->delta_gain_code[1]; + cmd.delta_gain_2 = data->delta_gain_code[2]; + iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd, NULL); + + data->radio_write = 1; + data->state = IWL_CHAIN_NOISE_CALIBRATED; + } + + data->chain_noise_a = 0; + data->chain_noise_b = 0; + data->chain_noise_c = 0; + data->chain_signal_a = 0; + data->chain_signal_b = 0; + data->chain_signal_c = 0; + data->beacon_count = 0; +} + + +static void iwl5000_chain_noise_reset(struct iwl_priv *priv) +{ + struct iwl_chain_noise_data *data = &priv->chain_noise_data; + + if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) { + struct iwl5000_calibration_chain_noise_reset_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_code = IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD; + if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, + sizeof(cmd), &cmd)) + IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n"); + data->state = IWL_CHAIN_NOISE_ACCUMULATE; + IWL_DEBUG_CALIB("Run chain_noise_calibrate\n"); + } +} + +static struct iwl_sensitivity_ranges iwl5000_sensitivity = { + .min_nrg_cck = 95, + .max_nrg_cck = 0, + .auto_corr_min_ofdm = 90, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 120, + .auto_corr_min_ofdm_mrc_x1 = 240, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + .auto_corr_max_ofdm_x1 = 155, + .auto_corr_max_ofdm_mrc_x1 = 290, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 170, + .auto_corr_max_cck_mrc = 400, + .nrg_th_cck = 95, + .nrg_th_ofdm = 95, +}; + +#endif /* CONFIG_IWL5000_RUN_TIME_CALIB */ + +static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv, + size_t offset) +{ + u32 address = eeprom_indirect_address(priv, offset); + BUG_ON(address >= priv->cfg->eeprom_size); + return &priv->eeprom[address]; +} + +static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) +{ + if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) || + (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { + IWL_ERROR("invalid queues_num, should be between %d and %d\n", + IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES); + return -EINVAL; + } + + priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues; + priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto; + priv->hw_params.tx_cmd_len = sizeof(struct iwl4965_tx_cmd); + priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; + priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; + if (priv->cfg->mod_params->amsdu_size_8K) + priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K; + else + priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K; + priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256; + priv->hw_params.max_stations = IWL5000_STATION_COUNT; + priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; + priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE; + priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; + priv->hw_params.fat_channel = BIT(IEEE80211_BAND_2GHZ) | + BIT(IEEE80211_BAND_5GHZ); +#ifdef CONFIG_IWL5000_RUN_TIME_CALIB + priv->hw_params.sens = &iwl5000_sensitivity; +#endif + + switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { + case CSR_HW_REV_TYPE_5100: + case CSR_HW_REV_TYPE_5150: + priv->hw_params.tx_chains_num = 1; + priv->hw_params.rx_chains_num = 2; + /* FIXME: move to ANT_A, ANT_B, ANT_C enum */ + priv->hw_params.valid_tx_ant = ANT_A; + priv->hw_params.valid_rx_ant = ANT_AB; + break; + case CSR_HW_REV_TYPE_5300: + case CSR_HW_REV_TYPE_5350: + priv->hw_params.tx_chains_num = 3; + priv->hw_params.rx_chains_num = 3; + priv->hw_params.valid_tx_ant = ANT_ABC; + priv->hw_params.valid_rx_ant = ANT_ABC; + break; + } + + switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { + case CSR_HW_REV_TYPE_5100: + case CSR_HW_REV_TYPE_5300: + /* 5X00 wants in Celsius */ + priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; + break; + case CSR_HW_REV_TYPE_5150: + case CSR_HW_REV_TYPE_5350: + /* 5X50 wants in Kelvin */ + priv->hw_params.ct_kill_threshold = + CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD); + break; + } + + return 0; +} + +static int iwl5000_alloc_shared_mem(struct iwl_priv *priv) +{ + priv->shared_virt = pci_alloc_consistent(priv->pci_dev, + sizeof(struct iwl5000_shared), + &priv->shared_phys); + if (!priv->shared_virt) + return -ENOMEM; + + memset(priv->shared_virt, 0, sizeof(struct iwl5000_shared)); + + return 0; +} + +static void iwl5000_free_shared_mem(struct iwl_priv *priv) +{ + if (priv->shared_virt) + pci_free_consistent(priv->pci_dev, + sizeof(struct iwl5000_shared), + priv->shared_virt, + priv->shared_phys); +} + +/** + * iwl5000_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array + */ +static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv, + struct iwl4965_tx_queue *txq, + u16 byte_cnt) +{ + struct iwl5000_shared *shared_data = priv->shared_virt; + int txq_id = txq->q.id; + u8 sec_ctl = 0; + u8 sta = 0; + int len; + + len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; + + if (txq_id != IWL_CMD_QUEUE_NUM) { + sta = txq->cmd[txq->q.write_ptr].cmd.tx.sta_id; + sec_ctl = txq->cmd[txq->q.write_ptr].cmd.tx.sec_ctl; + + switch (sec_ctl & TX_CMD_SEC_MSK) { + case TX_CMD_SEC_CCM: + len += CCMP_MIC_LEN; + break; + case TX_CMD_SEC_TKIP: + len += TKIP_ICV_LEN; + break; + case TX_CMD_SEC_WEP: + len += WEP_IV_LEN + WEP_ICV_LEN; + break; + } + } + + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[txq->q.write_ptr], byte_cnt, len); + + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[txq->q.write_ptr], sta_id, sta); + + if (txq->q.write_ptr < IWL50_MAX_WIN_SIZE) { + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[IWL50_QUEUE_SIZE + txq->q.write_ptr], + byte_cnt, len); + IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. + tfd_offset[IWL50_QUEUE_SIZE + txq->q.write_ptr], + sta_id, sta); + } +} + +static struct iwl_hcmd_ops iwl5000_hcmd = { +}; + +static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = { +#ifdef CONFIG_IWL5000_RUN_TIME_CALIB + .gain_computation = iwl5000_gain_computation, + .chain_noise_reset = iwl5000_chain_noise_reset, +#endif +}; + +static struct iwl_lib_ops iwl5000_lib = { + .set_hw_params = iwl5000_hw_set_hw_params, + .alloc_shared_mem = iwl5000_alloc_shared_mem, + .free_shared_mem = iwl5000_free_shared_mem, + .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl, + .apm_ops = { + .init = iwl5000_apm_init, + .config = iwl5000_nic_init, + .set_pwr_src = iwl4965_set_pwr_src, + }, + .eeprom_ops = { + .regulatory_bands = { + EEPROM_5000_REG_BAND_1_CHANNELS, + EEPROM_5000_REG_BAND_2_CHANNELS, + EEPROM_5000_REG_BAND_3_CHANNELS, + EEPROM_5000_REG_BAND_4_CHANNELS, + EEPROM_5000_REG_BAND_5_CHANNELS, + EEPROM_5000_REG_BAND_24_FAT_CHANNELS, + EEPROM_5000_REG_BAND_52_FAT_CHANNELS + }, + .verify_signature = iwlcore_eeprom_verify_signature, + .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, + .release_semaphore = iwlcore_eeprom_release_semaphore, + .check_version = iwl5000_eeprom_check_version, + .query_addr = iwl5000_eeprom_query_addr, + }, +}; + +static struct iwl_ops iwl5000_ops = { + .lib = &iwl5000_lib, + .hcmd = &iwl5000_hcmd, + .utils = &iwl5000_hcmd_utils, +}; + +static struct iwl_mod_params iwl50_mod_params = { + .num_of_queues = IWL50_NUM_QUEUES, + .enable_qos = 1, + .amsdu_size_8K = 1, + /* the rest are 0 by default */ +}; + + +struct iwl_cfg iwl5300_agn_cfg = { + .name = "5300AGN", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +struct iwl_cfg iwl5100_agn_cfg = { + .name = "5100AGN", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +struct iwl_cfg iwl5350_agn_cfg = { + .name = "5350AGN", + .fw_name = "iwlwifi-5000" IWL5000_UCODE_API ".ucode", + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, + .ops = &iwl5000_ops, + .eeprom_size = IWL_5000_EEPROM_IMG_SIZE, + .mod_params = &iwl50_mod_params, +}; + +module_param_named(disable50, iwl50_mod_params.disable, int, 0444); +MODULE_PARM_DESC(disable50, + "manually disable the 50XX radio (default 0 [radio on])"); +module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444); +MODULE_PARM_DESC(swcrypto50, + "using software crypto engine (default 0 [hardware])\n"); +module_param_named(debug50, iwl50_mod_params.debug, int, 0444); +MODULE_PARM_DESC(debug50, "50XX debug output mask"); +module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444); +MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series"); +module_param_named(qos_enable50, iwl50_mod_params.enable_qos, int, 0444); +MODULE_PARM_DESC(qos_enable50, "enable all 50XX QoS functionality"); +module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444); +MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series"); + + diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c new file mode 100644 index 00000000000..1289d4c91ab --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -0,0 +1,779 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Tomas Winkler <tomas.winkler@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#include <linux/kernel.h> +#include <net/mac80211.h> + +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-calib.h" +#include "iwl-eeprom.h" + +/* "false alarms" are signals that our DSP tries to lock onto, + * but then determines that they are either noise, or transmissions + * from a distant wireless network (also "noise", really) that get + * "stepped on" by stronger transmissions within our own network. + * This algorithm attempts to set a sensitivity level that is high + * enough to receive all of our own network traffic, but not so + * high that our DSP gets too busy trying to lock onto non-network + * activity/noise. */ +static int iwl_sens_energy_cck(struct iwl_priv *priv, + u32 norm_fa, + u32 rx_enable_time, + struct statistics_general_data *rx_info) +{ + u32 max_nrg_cck = 0; + int i = 0; + u8 max_silence_rssi = 0; + u32 silence_ref = 0; + u8 silence_rssi_a = 0; + u8 silence_rssi_b = 0; + u8 silence_rssi_c = 0; + u32 val; + + /* "false_alarms" values below are cross-multiplications to assess the + * numbers of false alarms within the measured period of actual Rx + * (Rx is off when we're txing), vs the min/max expected false alarms + * (some should be expected if rx is sensitive enough) in a + * hypothetical listening period of 200 time units (TU), 204.8 msec: + * + * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time + * + * */ + u32 false_alarms = norm_fa * 200 * 1024; + u32 max_false_alarms = MAX_FA_CCK * rx_enable_time; + u32 min_false_alarms = MIN_FA_CCK * rx_enable_time; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + data = &(priv->sensitivity_data); + + data->nrg_auto_corr_silence_diff = 0; + + /* Find max silence rssi among all 3 receivers. + * This is background noise, which may include transmissions from other + * networks, measured during silence before our network's beacon */ + silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a & + ALL_BAND_FILTER) >> 8); + silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b & + ALL_BAND_FILTER) >> 8); + silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c & + ALL_BAND_FILTER) >> 8); + + val = max(silence_rssi_b, silence_rssi_c); + max_silence_rssi = max(silence_rssi_a, (u8) val); + + /* Store silence rssi in 20-beacon history table */ + data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi; + data->nrg_silence_idx++; + if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L) + data->nrg_silence_idx = 0; + + /* Find max silence rssi across 20 beacon history */ + for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) { + val = data->nrg_silence_rssi[i]; + silence_ref = max(silence_ref, val); + } + IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n", + silence_rssi_a, silence_rssi_b, silence_rssi_c, + silence_ref); + + /* Find max rx energy (min value!) among all 3 receivers, + * measured during beacon frame. + * Save it in 10-beacon history table. */ + i = data->nrg_energy_idx; + val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c); + data->nrg_value[i] = min(rx_info->beacon_energy_a, val); + + data->nrg_energy_idx++; + if (data->nrg_energy_idx >= 10) + data->nrg_energy_idx = 0; + + /* Find min rx energy (max value) across 10 beacon history. + * This is the minimum signal level that we want to receive well. + * Add backoff (margin so we don't miss slightly lower energy frames). + * This establishes an upper bound (min value) for energy threshold. */ + max_nrg_cck = data->nrg_value[0]; + for (i = 1; i < 10; i++) + max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i])); + max_nrg_cck += 6; + + IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n", + rx_info->beacon_energy_a, rx_info->beacon_energy_b, + rx_info->beacon_energy_c, max_nrg_cck - 6); + + /* Count number of consecutive beacons with fewer-than-desired + * false alarms. */ + if (false_alarms < min_false_alarms) + data->num_in_cck_no_fa++; + else + data->num_in_cck_no_fa = 0; + IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n", + data->num_in_cck_no_fa); + + /* If we got too many false alarms this time, reduce sensitivity */ + if ((false_alarms > max_false_alarms) && + (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) { + IWL_DEBUG_CALIB("norm FA %u > max FA %u\n", + false_alarms, max_false_alarms); + IWL_DEBUG_CALIB("... reducing sensitivity\n"); + data->nrg_curr_state = IWL_FA_TOO_MANY; + /* Store for "fewer than desired" on later beacon */ + data->nrg_silence_ref = silence_ref; + + /* increase energy threshold (reduce nrg value) + * to decrease sensitivity */ + if (data->nrg_th_cck > + (ranges->max_nrg_cck + NRG_STEP_CCK)) + data->nrg_th_cck = data->nrg_th_cck + - NRG_STEP_CCK; + else + data->nrg_th_cck = ranges->max_nrg_cck; + /* Else if we got fewer than desired, increase sensitivity */ + } else if (false_alarms < min_false_alarms) { + data->nrg_curr_state = IWL_FA_TOO_FEW; + + /* Compare silence level with silence level for most recent + * healthy number or too many false alarms */ + data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref - + (s32)silence_ref; + + IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n", + false_alarms, min_false_alarms, + data->nrg_auto_corr_silence_diff); + + /* Increase value to increase sensitivity, but only if: + * 1a) previous beacon did *not* have *too many* false alarms + * 1b) AND there's a significant difference in Rx levels + * from a previous beacon with too many, or healthy # FAs + * OR 2) We've seen a lot of beacons (100) with too few + * false alarms */ + if ((data->nrg_prev_state != IWL_FA_TOO_MANY) && + ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || + (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { + + IWL_DEBUG_CALIB("... increasing sensitivity\n"); + /* Increase nrg value to increase sensitivity */ + val = data->nrg_th_cck + NRG_STEP_CCK; + data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val); + } else { + IWL_DEBUG_CALIB("... but not changing sensitivity\n"); + } + + /* Else we got a healthy number of false alarms, keep status quo */ + } else { + IWL_DEBUG_CALIB(" FA in safe zone\n"); + data->nrg_curr_state = IWL_FA_GOOD_RANGE; + + /* Store for use in "fewer than desired" with later beacon */ + data->nrg_silence_ref = silence_ref; + + /* If previous beacon had too many false alarms, + * give it some extra margin by reducing sensitivity again + * (but don't go below measured energy of desired Rx) */ + if (IWL_FA_TOO_MANY == data->nrg_prev_state) { + IWL_DEBUG_CALIB("... increasing margin\n"); + if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN)) + data->nrg_th_cck -= NRG_MARGIN; + else + data->nrg_th_cck = max_nrg_cck; + } + } + + /* Make sure the energy threshold does not go above the measured + * energy of the desired Rx signals (reduced by backoff margin), + * or else we might start missing Rx frames. + * Lower value is higher energy, so we use max()! + */ + data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck); + IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck); + + data->nrg_prev_state = data->nrg_curr_state; + + /* Auto-correlation CCK algorithm */ + if (false_alarms > min_false_alarms) { + + /* increase auto_corr values to decrease sensitivity + * so the DSP won't be disturbed by the noise + */ + if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK) + data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1; + else { + val = data->auto_corr_cck + AUTO_CORR_STEP_CCK; + data->auto_corr_cck = + min((u32)ranges->auto_corr_max_cck, val); + } + val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK; + data->auto_corr_cck_mrc = + min((u32)ranges->auto_corr_max_cck_mrc, val); + } else if ((false_alarms < min_false_alarms) && + ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || + (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { + + /* Decrease auto_corr values to increase sensitivity */ + val = data->auto_corr_cck - AUTO_CORR_STEP_CCK; + data->auto_corr_cck = + max((u32)ranges->auto_corr_min_cck, val); + val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK; + data->auto_corr_cck_mrc = + max((u32)ranges->auto_corr_min_cck_mrc, val); + } + + return 0; +} + + +static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv, + u32 norm_fa, + u32 rx_enable_time) +{ + u32 val; + u32 false_alarms = norm_fa * 200 * 1024; + u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time; + u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + data = &(priv->sensitivity_data); + + /* If we got too many false alarms this time, reduce sensitivity */ + if (false_alarms > max_false_alarms) { + + IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n", + false_alarms, max_false_alarms); + + val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm = + min((u32)ranges->auto_corr_max_ofdm, val); + + val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc = + min((u32)ranges->auto_corr_max_ofdm_mrc, val); + + val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_x1 = + min((u32)ranges->auto_corr_max_ofdm_x1, val); + + val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc_x1 = + min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val); + } + + /* Else if we got fewer than desired, increase sensitivity */ + else if (false_alarms < min_false_alarms) { + + IWL_DEBUG_CALIB("norm FA %u < min FA %u\n", + false_alarms, min_false_alarms); + + val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm = + max((u32)ranges->auto_corr_min_ofdm, val); + + val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc = + max((u32)ranges->auto_corr_min_ofdm_mrc, val); + + val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_x1 = + max((u32)ranges->auto_corr_min_ofdm_x1, val); + + val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM; + data->auto_corr_ofdm_mrc_x1 = + max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val); + } else { + IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n", + min_false_alarms, false_alarms, max_false_alarms); + } + return 0; +} + +/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ +static int iwl_sensitivity_write(struct iwl_priv *priv) +{ + int ret = 0; + struct iwl_sensitivity_cmd cmd ; + struct iwl_sensitivity_data *data = NULL; + struct iwl_host_cmd cmd_out = { + .id = SENSITIVITY_CMD, + .len = sizeof(struct iwl_sensitivity_cmd), + .meta.flags = CMD_ASYNC, + .data = &cmd, + }; + + data = &(priv->sensitivity_data); + + memset(&cmd, 0, sizeof(cmd)); + + cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm); + cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_mrc); + cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_x1); + cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1); + + cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] = + cpu_to_le16((u16)data->auto_corr_cck); + cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] = + cpu_to_le16((u16)data->auto_corr_cck_mrc); + + cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] = + cpu_to_le16((u16)data->nrg_th_cck); + cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] = + cpu_to_le16((u16)data->nrg_th_ofdm); + + cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] = + __constant_cpu_to_le16(190); + cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] = + __constant_cpu_to_le16(390); + cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] = + __constant_cpu_to_le16(62); + + IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n", + data->auto_corr_ofdm, data->auto_corr_ofdm_mrc, + data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1, + data->nrg_th_ofdm); + + IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n", + data->auto_corr_cck, data->auto_corr_cck_mrc, + data->nrg_th_cck); + + /* Update uCode's "work" table, and copy it to DSP */ + cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; + + /* Don't send command to uCode if nothing has changed */ + if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]), + sizeof(u16)*HD_TABLE_SIZE)) { + IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n"); + return 0; + } + + /* Copy table for comparison next time */ + memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), + sizeof(u16)*HD_TABLE_SIZE); + + ret = iwl_send_cmd(priv, &cmd_out); + if (ret) + IWL_ERROR("SENSITIVITY_CMD failed\n"); + + return ret; +} + +void iwl_init_sensitivity(struct iwl_priv *priv) +{ + int ret = 0; + int i; + struct iwl_sensitivity_data *data = NULL; + const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens; + + IWL_DEBUG_CALIB("Start iwl_init_sensitivity\n"); + + /* Clear driver's sensitivity algo data */ + data = &(priv->sensitivity_data); + + if (ranges == NULL) + /* can happen if IWLWIFI_RUN_TIME_CALIB is selected + * but no IWLXXXX_RUN_TIME_CALIB for specific is selected */ + return; + + memset(data, 0, sizeof(struct iwl_sensitivity_data)); + + data->num_in_cck_no_fa = 0; + data->nrg_curr_state = IWL_FA_TOO_MANY; + data->nrg_prev_state = IWL_FA_TOO_MANY; + data->nrg_silence_ref = 0; + data->nrg_silence_idx = 0; + data->nrg_energy_idx = 0; + + for (i = 0; i < 10; i++) + data->nrg_value[i] = 0; + + for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) + data->nrg_silence_rssi[i] = 0; + + data->auto_corr_ofdm = 90; + data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc; + data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1; + data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1; + data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF; + data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc; + data->nrg_th_cck = ranges->nrg_th_cck; + data->nrg_th_ofdm = ranges->nrg_th_ofdm; + + data->last_bad_plcp_cnt_ofdm = 0; + data->last_fa_cnt_ofdm = 0; + data->last_bad_plcp_cnt_cck = 0; + data->last_fa_cnt_cck = 0; + + ret |= iwl_sensitivity_write(priv); + IWL_DEBUG_CALIB("<<return 0x%X\n", ret); +} +EXPORT_SYMBOL(iwl_init_sensitivity); + +void iwl_sensitivity_calibration(struct iwl_priv *priv, + struct iwl4965_notif_statistics *resp) +{ + u32 rx_enable_time; + u32 fa_cck; + u32 fa_ofdm; + u32 bad_plcp_cck; + u32 bad_plcp_ofdm; + u32 norm_fa_ofdm; + u32 norm_fa_cck; + struct iwl_sensitivity_data *data = NULL; + struct statistics_rx_non_phy *rx_info = &(resp->rx.general); + struct statistics_rx *statistics = &(resp->rx); + unsigned long flags; + struct statistics_general_data statis; + + data = &(priv->sensitivity_data); + + if (!iwl_is_associated(priv)) { + IWL_DEBUG_CALIB("<< - not associated\n"); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { + IWL_DEBUG_CALIB("<< invalid data.\n"); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + /* Extract Statistics: */ + rx_enable_time = le32_to_cpu(rx_info->channel_load); + fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt); + fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt); + bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err); + bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err); + + statis.beacon_silence_rssi_a = + le32_to_cpu(statistics->general.beacon_silence_rssi_a); + statis.beacon_silence_rssi_b = + le32_to_cpu(statistics->general.beacon_silence_rssi_b); + statis.beacon_silence_rssi_c = + le32_to_cpu(statistics->general.beacon_silence_rssi_c); + statis.beacon_energy_a = + le32_to_cpu(statistics->general.beacon_energy_a); + statis.beacon_energy_b = + le32_to_cpu(statistics->general.beacon_energy_b); + statis.beacon_energy_c = + le32_to_cpu(statistics->general.beacon_energy_c); + + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time); + + if (!rx_enable_time) { + IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n"); + return; + } + + /* These statistics increase monotonically, and do not reset + * at each beacon. Calculate difference from last value, or just + * use the new statistics value if it has reset or wrapped around. */ + if (data->last_bad_plcp_cnt_cck > bad_plcp_cck) + data->last_bad_plcp_cnt_cck = bad_plcp_cck; + else { + bad_plcp_cck -= data->last_bad_plcp_cnt_cck; + data->last_bad_plcp_cnt_cck += bad_plcp_cck; + } + + if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm) + data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm; + else { + bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm; + data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm; + } + + if (data->last_fa_cnt_ofdm > fa_ofdm) + data->last_fa_cnt_ofdm = fa_ofdm; + else { + fa_ofdm -= data->last_fa_cnt_ofdm; + data->last_fa_cnt_ofdm += fa_ofdm; + } + + if (data->last_fa_cnt_cck > fa_cck) + data->last_fa_cnt_cck = fa_cck; + else { + fa_cck -= data->last_fa_cnt_cck; + data->last_fa_cnt_cck += fa_cck; + } + + /* Total aborted signal locks */ + norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm; + norm_fa_cck = fa_cck + bad_plcp_cck; + + IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck, + bad_plcp_cck, fa_ofdm, bad_plcp_ofdm); + + iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time); + iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis); + iwl_sensitivity_write(priv); + + return; +} +EXPORT_SYMBOL(iwl_sensitivity_calibration); + +/* + * Accumulate 20 beacons of signal and noise statistics for each of + * 3 receivers/antennas/rx-chains, then figure out: + * 1) Which antennas are connected. + * 2) Differential rx gain settings to balance the 3 receivers. + */ +void iwl_chain_noise_calibration(struct iwl_priv *priv, + struct iwl4965_notif_statistics *stat_resp) +{ + struct iwl_chain_noise_data *data = NULL; + + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_sig_a; + u32 chain_sig_b; + u32 chain_sig_c; + u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; + u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; + u32 max_average_sig; + u16 max_average_sig_antenna_i; + u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; + u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; + u16 i = 0; + u16 rxon_chnum = INITIALIZATION_VALUE; + u16 stat_chnum = INITIALIZATION_VALUE; + u8 rxon_band24; + u8 stat_band24; + u32 active_chains = 0; + u8 num_tx_chains; + unsigned long flags; + struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general); + + data = &(priv->chain_noise_data); + + /* Accumulate just the first 20 beacons after the first association, + * then we're done forever. */ + if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) { + if (data->state == IWL_CHAIN_NOISE_ALIVE) + IWL_DEBUG_CALIB("Wait for noise calib reset\n"); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { + IWL_DEBUG_CALIB(" << Interference data unavailable\n"); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + rxon_band24 = !!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK); + rxon_chnum = le16_to_cpu(priv->staging_rxon.channel); + stat_band24 = !!(stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK); + stat_chnum = le32_to_cpu(stat_resp->flag) >> 16; + + /* Make sure we accumulate data for just the associated channel + * (even if scanning). */ + if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) { + IWL_DEBUG_CALIB("Stats not from chan=%d, band24=%d\n", + rxon_chnum, rxon_band24); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + + /* Accumulate beacon statistics values across 20 beacons */ + chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) & + IN_BAND_FILTER; + chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) & + IN_BAND_FILTER; + chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) & + IN_BAND_FILTER; + + chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER; + chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER; + chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER; + + spin_unlock_irqrestore(&priv->lock, flags); + + data->beacon_count++; + + data->chain_noise_a = (chain_noise_a + data->chain_noise_a); + data->chain_noise_b = (chain_noise_b + data->chain_noise_b); + data->chain_noise_c = (chain_noise_c + data->chain_noise_c); + + data->chain_signal_a = (chain_sig_a + data->chain_signal_a); + data->chain_signal_b = (chain_sig_b + data->chain_signal_b); + data->chain_signal_c = (chain_sig_c + data->chain_signal_c); + + IWL_DEBUG_CALIB("chan=%d, band24=%d, beacon=%d\n", + rxon_chnum, rxon_band24, data->beacon_count); + IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n", + chain_sig_a, chain_sig_b, chain_sig_c); + IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n", + chain_noise_a, chain_noise_b, chain_noise_c); + + /* If this is the 20th beacon, determine: + * 1) Disconnected antennas (using signal strengths) + * 2) Differential gain (using silence noise) to balance receivers */ + if (data->beacon_count != CAL_NUM_OF_BEACONS) + return; + + /* Analyze signal for disconnected antenna */ + average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS; + average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS; + average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS; + + if (average_sig[0] >= average_sig[1]) { + max_average_sig = average_sig[0]; + max_average_sig_antenna_i = 0; + active_chains = (1 << max_average_sig_antenna_i); + } else { + max_average_sig = average_sig[1]; + max_average_sig_antenna_i = 1; + active_chains = (1 << max_average_sig_antenna_i); + } + + if (average_sig[2] >= max_average_sig) { + max_average_sig = average_sig[2]; + max_average_sig_antenna_i = 2; + active_chains = (1 << max_average_sig_antenna_i); + } + + IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n", + average_sig[0], average_sig[1], average_sig[2]); + IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n", + max_average_sig, max_average_sig_antenna_i); + + /* Compare signal strengths for all 3 receivers. */ + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (i != max_average_sig_antenna_i) { + s32 rssi_delta = (max_average_sig - average_sig[i]); + + /* If signal is very weak, compared with + * strongest, mark it as disconnected. */ + if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) + data->disconn_array[i] = 1; + else + active_chains |= (1 << i); + IWL_DEBUG_CALIB("i = %d rssiDelta = %d " + "disconn_array[i] = %d\n", + i, rssi_delta, data->disconn_array[i]); + } + } + + num_tx_chains = 0; + for (i = 0; i < NUM_RX_CHAINS; i++) { + /* loops on all the bits of + * priv->hw_setting.valid_tx_ant */ + u8 ant_msk = (1 << i); + if (!(priv->hw_params.valid_tx_ant & ant_msk)) + continue; + + num_tx_chains++; + if (data->disconn_array[i] == 0) + /* there is a Tx antenna connected */ + break; + if (num_tx_chains == priv->hw_params.tx_chains_num && + data->disconn_array[i]) { + /* This is the last TX antenna and is also + * disconnected connect it anyway */ + data->disconn_array[i] = 0; + active_chains |= ant_msk; + IWL_DEBUG_CALIB("All Tx chains are disconnected W/A - " + "declare %d as connected\n", i); + break; + } + } + + IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n", + active_chains); + + /* Save for use within RXON, TX, SCAN commands, etc. */ + /*priv->valid_antenna = active_chains;*/ + /*FIXME: should be reflected in RX chains in RXON */ + + /* Analyze noise for rx balance */ + average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS); + average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS); + average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS); + + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (!(data->disconn_array[i]) && + (average_noise[i] <= min_average_noise)) { + /* This means that chain i is active and has + * lower noise values so far: */ + min_average_noise = average_noise[i]; + min_average_noise_antenna_i = i; + } + } + + IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n", + average_noise[0], average_noise[1], + average_noise[2]); + + IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n", + min_average_noise, min_average_noise_antenna_i); + + priv->cfg->ops->utils->gain_computation(priv, average_noise, + min_average_noise_antenna_i, min_average_noise); +} +EXPORT_SYMBOL(iwl_chain_noise_calibration); + diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.h b/drivers/net/wireless/iwlwifi/iwl-calib.h new file mode 100644 index 00000000000..933b0b0a797 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-calib.h @@ -0,0 +1,104 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Tomas Winkler <tomas.winkler@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#ifndef __iwl_calib_h__ +#define __iwl_calib_h__ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> + +#include <net/mac80211.h> +#include "iwl-eeprom.h" +#include "iwl-core.h" +#include "iwl-dev.h" + +#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB +void iwl_chain_noise_calibration(struct iwl_priv *priv, + struct iwl4965_notif_statistics *stat_resp); +void iwl_sensitivity_calibration(struct iwl_priv *priv, + struct iwl4965_notif_statistics *resp); + +void iwl_init_sensitivity(struct iwl_priv *priv); + +static inline void iwl_chain_noise_reset(struct iwl_priv *priv) +{ + if (priv->cfg->ops->utils->chain_noise_reset) + priv->cfg->ops->utils->chain_noise_reset(priv); +} +#else +static inline void iwl_chain_noise_calibration(struct iwl_priv *priv, + struct iwl4965_notif_statistics *stat_resp) +{ +} +static inline void iwl_sensitivity_calibration(struct iwl_priv *priv, + struct iwl4965_notif_statistics *resp) +{ +} +static inline void iwl_init_sensitivity(struct iwl_priv *priv) +{ +} +static inline void iwl_chain_noise_reset(struct iwl_priv *priv) +{ +} +#endif + +#endif /* __iwl_calib_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 3bcd107e2d7..5afa7b79b59 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -61,9 +61,9 @@ * *****************************************************************************/ /* - * Please use this file (iwl-4965-commands.h) only for uCode API definitions. + * Please use this file (iwl-commands.h) only for uCode API definitions. * Please use iwl-4965-hw.h for hardware-related definitions. - * Please use iwl-4965.h for driver implementation definitions. + * Please use iwl-dev.h for driver implementation definitions. */ #ifndef __iwl4965_commands_h__ @@ -269,10 +269,11 @@ struct iwl_cmd_header { * 10 B active, A inactive * 11 Both active */ -#define RATE_MCS_ANT_POS 14 -#define RATE_MCS_ANT_A_MSK 0x04000 -#define RATE_MCS_ANT_B_MSK 0x08000 -#define RATE_MCS_ANT_AB_MSK 0x0C000 +#define RATE_MCS_ANT_POS 14 +#define RATE_MCS_ANT_A_MSK 0x04000 +#define RATE_MCS_ANT_B_MSK 0x08000 +#define RATE_MCS_ANT_C_MSK 0x10000 +#define RATE_MCS_ANT_ABC_MSK 0x1C000 /** @@ -711,6 +712,8 @@ struct iwl4965_qosparam_cmd { #define IWL_STA_ID 2 #define IWL4965_BROADCAST_ID 31 #define IWL4965_STATION_COUNT 32 +#define IWL5000_BROADCAST_ID 15 +#define IWL5000_STATION_COUNT 16 #define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/ #define IWL_INVALID_STATION 255 @@ -1100,6 +1103,14 @@ struct iwl4965_rx_mpdu_res_start { #define TX_CMD_SEC_KEY128 0x08 /* + * security overhead sizes + */ +#define WEP_IV_LEN 4 +#define WEP_ICV_LEN 4 +#define CCMP_MIC_LEN 8 +#define TKIP_ICV_LEN 4 + +/* * 4965 uCode updates these Tx attempt count values in host DRAM. * Used for managing Tx retries when expecting block-acks. * Driver should set these fields to 0. @@ -1853,6 +1864,7 @@ struct iwl4965_spectrum_notification { #define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le16(1 << 0) #define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le16(1 << 2) #define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3) +#define IWL_POWER_FAST_PD __constant_cpu_to_le16(1 << 4) struct iwl4965_powertable_cmd { __le16 flags; @@ -2559,7 +2571,7 @@ struct iwl4965_missed_beacon_notif { */ /* - * Table entries in SENSITIVITY_CMD (struct iwl4965_sensitivity_cmd) + * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd) */ #define HD_TABLE_SIZE (11) /* number of entries */ #define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */ @@ -2574,18 +2586,18 @@ struct iwl4965_missed_beacon_notif { #define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9) #define HD_OFDM_ENERGY_TH_IN_INDEX (10) -/* Control field in struct iwl4965_sensitivity_cmd */ +/* Control field in struct iwl_sensitivity_cmd */ #define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0) #define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1) /** - * struct iwl4965_sensitivity_cmd + * struct iwl_sensitivity_cmd * @control: (1) updates working table, (0) updates default table * @table: energy threshold values, use HD_* as index into table * * Always use "1" in "control" to update uCode's working table and DSP. */ -struct iwl4965_sensitivity_cmd { +struct iwl_sensitivity_cmd { __le16 control; /* always use "1" */ __le16 table[HD_TABLE_SIZE]; /* use HD_* as index */ } __attribute__ ((packed)); @@ -2659,6 +2671,37 @@ struct iwl4965_calibration_cmd { u8 reserved1; } __attribute__ ((packed)); +/* Phy calibration command for 5000 series */ + +enum { + IWL5000_PHY_CALIBRATE_DC_CMD = 8, + IWL5000_PHY_CALIBRATE_LO_CMD = 9, + IWL5000_PHY_CALIBRATE_RX_BB_CMD = 10, + IWL5000_PHY_CALIBRATE_TX_IQ_CMD = 11, + IWL5000_PHY_CALIBRATE_RX_IQ_CMD = 12, + IWL5000_PHY_CALIBRATION_NOISE_CMD = 13, + IWL5000_PHY_CALIBRATE_AGC_TABLE_CMD = 14, + IWL5000_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15, + IWL5000_PHY_CALIBRATE_BASE_BAND_CMD = 16, + IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18, + IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19, +}; + +struct iwl5000_calibration_chain_noise_reset_cmd { + u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */ + u8 flags; /* not used */ + __le16 reserved; +} __attribute__ ((packed)); + +struct iwl5000_calibration_chain_noise_gain_cmd { + u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */ + u8 flags; /* not used */ + __le16 reserved; + u8 delta_gain_1; + u8 delta_gain_2; + __le16 reserved1; +} __attribute__ ((packed)); + /****************************************************************************** * (12) * Miscellaneous Commands: diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 2dfd982d7d1..c4b5c1a100f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -34,9 +34,11 @@ struct iwl_priv; /* FIXME: remove */ #include "iwl-debug.h" #include "iwl-eeprom.h" -#include "iwl-4965.h" /* FIXME: remove */ +#include "iwl-dev.h" /* FIXME: remove */ #include "iwl-core.h" +#include "iwl-io.h" #include "iwl-rfkill.h" +#include "iwl-power.h" MODULE_DESCRIPTION("iwl core"); @@ -49,6 +51,45 @@ u32 iwl_debug_level; EXPORT_SYMBOL(iwl_debug_level); #endif +#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ + [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ + IWL_RATE_SISO_##s##M_PLCP, \ + IWL_RATE_MIMO2_##s##M_PLCP,\ + IWL_RATE_MIMO3_##s##M_PLCP,\ + IWL_RATE_##r##M_IEEE, \ + IWL_RATE_##ip##M_INDEX, \ + IWL_RATE_##in##M_INDEX, \ + IWL_RATE_##rp##M_INDEX, \ + IWL_RATE_##rn##M_INDEX, \ + IWL_RATE_##pp##M_INDEX, \ + IWL_RATE_##np##M_INDEX } + +/* + * Parameter order: + * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to IWL_RATE_INVALID + * + */ +const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = { + IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ + IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ + /* FIXME:RS: ^^ should be INV (legacy) */ +}; +EXPORT_SYMBOL(iwl4965_rates); + /* This function both allocates and initializes hw and priv. */ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, struct ieee80211_ops *hw_ops) @@ -72,6 +113,14 @@ out: } EXPORT_SYMBOL(iwl_alloc_all); +void iwl_hw_detect(struct iwl_priv *priv) +{ + priv->hw_rev = _iwl_read32(priv, CSR_HW_REV); + priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG); + pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id); +} +EXPORT_SYMBOL(iwl_hw_detect); + /** * iwlcore_clear_stations_table - Clear the driver's station table * @@ -90,7 +139,7 @@ void iwlcore_clear_stations_table(struct iwl_priv *priv) } EXPORT_SYMBOL(iwlcore_clear_stations_table); -void iwlcore_reset_qos(struct iwl_priv *priv) +void iwl_reset_qos(struct iwl_priv *priv) { u16 cw_min = 15; u16 cw_max = 1023; @@ -176,7 +225,289 @@ void iwlcore_reset_qos(struct iwl_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); } -EXPORT_SYMBOL(iwlcore_reset_qos); +EXPORT_SYMBOL(iwl_reset_qos); + +#ifdef CONFIG_IWL4965_HT +static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, + struct ieee80211_ht_info *ht_info, + enum ieee80211_band band) +{ + ht_info->cap = 0; + memset(ht_info->supp_mcs_set, 0, 16); + + ht_info->ht_supported = 1; + + if (priv->hw_params.fat_channel & BIT(band)) { + ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH; + ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40; + ht_info->supp_mcs_set[4] = 0x01; + } + ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; + ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; + ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & + (IWL_MIMO_PS_NONE << 2)); + + if (priv->cfg->mod_params->amsdu_size_8K) + ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU; + + ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; + ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; + + ht_info->supp_mcs_set[0] = 0xFF; + if (priv->hw_params.tx_chains_num >= 2) + ht_info->supp_mcs_set[1] = 0xFF; + if (priv->hw_params.tx_chains_num >= 3) + ht_info->supp_mcs_set[2] = 0xFF; +} +#endif /* CONFIG_IWL4965_HT */ + +static void iwlcore_init_hw_rates(struct iwl_priv *priv, + struct ieee80211_rate *rates) +{ + int i; + + for (i = 0; i < IWL_RATE_COUNT; i++) { + rates[i].bitrate = iwl4965_rates[i].ieee * 5; + rates[i].hw_value = i; /* Rate scaling will work on indexes */ + rates[i].hw_value_short = i; + rates[i].flags = 0; + if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { + /* + * If CCK != 1M then set short preamble rate flag. + */ + rates[i].flags |= + (iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ? + 0 : IEEE80211_RATE_SHORT_PREAMBLE; + } + } +} + +/** + * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom + */ +static int iwlcore_init_geos(struct iwl_priv *priv) +{ + struct iwl_channel_info *ch; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *channels; + struct ieee80211_channel *geo_ch; + struct ieee80211_rate *rates; + int i = 0; + + if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || + priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { + IWL_DEBUG_INFO("Geography modes already initialized.\n"); + set_bit(STATUS_GEO_CONFIGURED, &priv->status); + return 0; + } + + channels = kzalloc(sizeof(struct ieee80211_channel) * + priv->channel_count, GFP_KERNEL); + if (!channels) + return -ENOMEM; + + rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)), + GFP_KERNEL); + if (!rates) { + kfree(channels); + return -ENOMEM; + } + + /* 5.2GHz channels start after the 2.4GHz channels */ + sband = &priv->bands[IEEE80211_BAND_5GHZ]; + sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; + /* just OFDM */ + sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; + sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE; + + iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ); + + sband = &priv->bands[IEEE80211_BAND_2GHZ]; + sband->channels = channels; + /* OFDM & CCK */ + sband->bitrates = rates; + sband->n_bitrates = IWL_RATE_COUNT; + + iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ); + + priv->ieee_channels = channels; + priv->ieee_rates = rates; + + iwlcore_init_hw_rates(priv, rates); + + for (i = 0; i < priv->channel_count; i++) { + ch = &priv->channel_info[i]; + + /* FIXME: might be removed if scan is OK */ + if (!is_channel_valid(ch)) + continue; + + if (is_channel_a_band(ch)) + sband = &priv->bands[IEEE80211_BAND_5GHZ]; + else + sband = &priv->bands[IEEE80211_BAND_2GHZ]; + + geo_ch = &sband->channels[sband->n_channels++]; + + geo_ch->center_freq = + ieee80211_channel_to_frequency(ch->channel); + geo_ch->max_power = ch->max_power_avg; + geo_ch->max_antenna_gain = 0xff; + geo_ch->hw_value = ch->channel; + + if (is_channel_valid(ch)) { + if (!(ch->flags & EEPROM_CHANNEL_IBSS)) + geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; + + if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) + geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + if (ch->flags & EEPROM_CHANNEL_RADAR) + geo_ch->flags |= IEEE80211_CHAN_RADAR; + + if (ch->max_power_avg > priv->max_channel_txpower_limit) + priv->max_channel_txpower_limit = + ch->max_power_avg; + } else { + geo_ch->flags |= IEEE80211_CHAN_DISABLED; + } + + /* Save flags for reg domain usage */ + geo_ch->orig_flags = geo_ch->flags; + + IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n", + ch->channel, geo_ch->center_freq, + is_channel_a_band(ch) ? "5.2" : "2.4", + geo_ch->flags & IEEE80211_CHAN_DISABLED ? + "restricted" : "valid", + geo_ch->flags); + } + + if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && + priv->cfg->sku & IWL_SKU_A) { + printk(KERN_INFO DRV_NAME + ": Incorrectly detected BG card as ABG. Please send " + "your PCI ID 0x%04X:0x%04X to maintainer.\n", + priv->pci_dev->device, priv->pci_dev->subsystem_device); + priv->cfg->sku &= ~IWL_SKU_A; + } + + printk(KERN_INFO DRV_NAME + ": Tunable channels: %d 802.11bg, %d 802.11a channels\n", + priv->bands[IEEE80211_BAND_2GHZ].n_channels, + priv->bands[IEEE80211_BAND_5GHZ].n_channels); + + if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &priv->bands[IEEE80211_BAND_2GHZ]; + if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &priv->bands[IEEE80211_BAND_5GHZ]; + + set_bit(STATUS_GEO_CONFIGURED, &priv->status); + + return 0; +} + +/* + * iwlcore_free_geos - undo allocations in iwlcore_init_geos + */ +void iwlcore_free_geos(struct iwl_priv *priv) +{ + kfree(priv->ieee_channels); + kfree(priv->ieee_rates); + clear_bit(STATUS_GEO_CONFIGURED, &priv->status); +} +EXPORT_SYMBOL(iwlcore_free_geos); + +#ifdef CONFIG_IWL4965_HT +static u8 is_single_rx_stream(struct iwl_priv *priv) +{ + return !priv->current_ht_config.is_ht || + ((priv->current_ht_config.supp_mcs_set[1] == 0) && + (priv->current_ht_config.supp_mcs_set[2] == 0)) || + priv->ps_mode == IWL_MIMO_PS_STATIC; +} +#else +static inline u8 is_single_rx_stream(struct iwl_priv *priv) +{ + return 1; +} +#endif /*CONFIG_IWL4965_HT */ + +/* + * Determine how many receiver/antenna chains to use. + * More provides better reception via diversity. Fewer saves power. + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, + u8 *idle_state, u8 *rx_state) +{ + u8 is_single = is_single_rx_stream(priv); + u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; + + /* # of Rx chains to use when expecting MIMO. */ + if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) + *rx_state = 2; + else + *rx_state = 3; + + /* # Rx chains when idling and maybe trying to save power */ + switch (priv->ps_mode) { + case IWL_MIMO_PS_STATIC: + case IWL_MIMO_PS_DYNAMIC: + *idle_state = (is_cam) ? 2 : 1; + break; + case IWL_MIMO_PS_NONE: + *idle_state = (is_cam) ? *rx_state : 1; + break; + default: + *idle_state = 1; + break; + } + + return 0; +} + +/** + * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void iwl_set_rxon_chain(struct iwl_priv *priv) +{ + u8 is_single = is_single_rx_stream(priv); + u8 idle_state, rx_state; + + priv->staging_rxon.rx_chain = 0; + rx_state = idle_state = 3; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, iwl_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + priv->staging_rxon.rx_chain |= + cpu_to_le16(priv->hw_params.valid_rx_ant << + RXON_RX_CHAIN_VALID_POS); + + /* How many receivers should we use? */ + iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state); + priv->staging_rxon.rx_chain |= + cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); + priv->staging_rxon.rx_chain |= + cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); + + if (!is_single && (rx_state >= 2) && + !test_bit(STATUS_POWER_PMI, &priv->status)) + priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); +} +EXPORT_SYMBOL(iwl_set_rxon_chain); /** * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON @@ -188,7 +519,7 @@ EXPORT_SYMBOL(iwlcore_reset_qos); * NOTE: Does not commit to the hardware; it sets appropriate bit fields * in the staging RXON flag structure based on the phymode */ -int iwlcore_set_rxon_channel(struct iwl_priv *priv, +int iwl_set_rxon_channel(struct iwl_priv *priv, enum ieee80211_band band, u16 channel) { @@ -214,7 +545,7 @@ int iwlcore_set_rxon_channel(struct iwl_priv *priv, return 0; } -EXPORT_SYMBOL(iwlcore_set_rxon_channel); +EXPORT_SYMBOL(iwl_set_rxon_channel); static void iwlcore_init_hw(struct iwl_priv *priv) { @@ -237,15 +568,96 @@ static void iwlcore_init_hw(struct iwl_priv *priv) hw->queues = 4; #ifdef CONFIG_IWL4965_HT /* Enhanced value; more queues, to support 11n aggregation */ - hw->queues = 16; + hw->ampdu_queues = 12; #endif /* CONFIG_IWL4965_HT */ } +static int iwlcore_init_drv(struct iwl_priv *priv) +{ + int ret; + int i; + + priv->retry_rate = 1; + priv->ibss_beacon = NULL; + + spin_lock_init(&priv->lock); + spin_lock_init(&priv->power_data.lock); + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + spin_lock_init(&priv->lq_mngr.lock); + + for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) + INIT_LIST_HEAD(&priv->ibss_mac_hash[i]); + + INIT_LIST_HEAD(&priv->free_frames); + + mutex_init(&priv->mutex); + + /* Clear the driver's (not device's) station table */ + iwlcore_clear_stations_table(priv); + + priv->data_retry_limit = -1; + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = IEEE80211_IF_TYPE_STA; + + priv->use_ant_b_for_management_frame = 1; /* start with ant B */ + priv->ps_mode = IWL_MIMO_PS_NONE; + + /* Choose which receivers/antennas to use */ + iwl_set_rxon_chain(priv); + + iwl_reset_qos(priv); + + priv->qos_data.qos_active = 0; + priv->qos_data.qos_cap.val = 0; + + iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); + + priv->rates_mask = IWL_RATES_MASK; + /* If power management is turned on, default to AC mode */ + priv->power_mode = IWL_POWER_AC; + priv->user_txpower_limit = IWL_DEFAULT_TX_POWER; + + ret = iwl_init_channel_map(priv); + if (ret) { + IWL_ERROR("initializing regulatory failed: %d\n", ret); + goto err; + } + + ret = iwlcore_init_geos(priv); + if (ret) { + IWL_ERROR("initializing geos failed: %d\n", ret); + goto err_free_channel_map; + } + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + IWL_ERROR("Failed to register network device (error %d)\n", + ret); + goto err_free_geos; + } + + priv->hw->conf.beacon_int = 100; + priv->mac80211_registered = 1; + + return 0; + +err_free_geos: + iwlcore_free_geos(priv); +err_free_channel_map: + iwl_free_channel_map(priv); +err: + return ret; +} + int iwl_setup(struct iwl_priv *priv) { int ret = 0; iwlcore_init_hw(priv); - ret = priv->cfg->ops->lib->init_drv(priv); + ret = iwlcore_init_drv(priv); return ret; } EXPORT_SYMBOL(iwl_setup); @@ -263,8 +675,10 @@ int iwlcore_low_level_notify(struct iwl_priv *priv, if (ret) IWL_ERROR("Unable to initialize RFKILL system. " "Ignoring error: %d\n", ret); + iwl_power_initialize(priv); break; case IWLCORE_START_EVT: + iwl_power_update_mode(priv, 1); break; case IWLCORE_STOP_EVT: break; @@ -290,3 +704,137 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags) } EXPORT_SYMBOL(iwl_send_statistics_request); +/** + * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, + * using sample data 100 bytes apart. If these sample points are good, + * it's a pretty good bet that everything between them is good, too. + */ +static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) +{ + u32 val; + int ret = 0; + u32 errcnt = 0; + u32 i; + + IWL_DEBUG_INFO("ucode inst image size is %u\n", len); + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, + i + RTC_INST_LOWER_BOUND); + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + ret = -EIO; + errcnt++; + if (errcnt >= 3) + break; + } + } + + iwl_release_nic_access(priv); + + return ret; +} + +/** + * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host, + * looking at all data. + */ +static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image, + u32 len) +{ + u32 val; + u32 save_len = len; + int ret = 0; + u32 errcnt; + + IWL_DEBUG_INFO("ucode inst image size is %u\n", len); + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND); + + errcnt = 0; + for (; len > 0; len -= sizeof(u32), image++) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + IWL_ERROR("uCode INST section is invalid at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + save_len - len, val, le32_to_cpu(*image)); + ret = -EIO; + errcnt++; + if (errcnt >= 20) + break; + } + } + + iwl_release_nic_access(priv); + + if (!errcnt) + IWL_DEBUG_INFO + ("ucode image in INSTRUCTION memory is good\n"); + + return ret; +} + +/** + * iwl_verify_ucode - determine which instruction image is in SRAM, + * and verify its contents + */ +int iwl_verify_ucode(struct iwl_priv *priv) +{ + __le32 *image; + u32 len; + int ret; + + /* Try bootstrap */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n"); + return 0; + } + + /* Try initialize */ + image = (__le32 *)priv->ucode_init.v_addr; + len = priv->ucode_init.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n"); + return 0; + } + + /* Try runtime/protocol */ + image = (__le32 *)priv->ucode_code.v_addr; + len = priv->ucode_code.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n"); + return 0; + } + + IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); + + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + ret = iwl_verify_inst_full(priv, image, len); + + return ret; +} +EXPORT_SYMBOL(iwl_verify_ucode); + diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 7193d97630d..369f1821584 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -87,17 +87,26 @@ struct iwl_hcmd_ops { }; struct iwl_hcmd_utils_ops { int (*enqueue_hcmd)(struct iwl_priv *priv, struct iwl_host_cmd *cmd); +#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB + void (*gain_computation)(struct iwl_priv *priv, + u32 *average_noise, + u16 min_average_noise_antennat_i, + u32 min_average_noise); + void (*chain_noise_reset)(struct iwl_priv *priv); +#endif }; struct iwl_lib_ops { - /* iwlwifi driver (priv) init */ - int (*init_drv)(struct iwl_priv *priv); /* set hw dependant perameters */ int (*set_hw_params)(struct iwl_priv *priv); - + /* ucode shared memory */ + int (*alloc_shared_mem)(struct iwl_priv *priv); + void (*free_shared_mem)(struct iwl_priv *priv); void (*txq_update_byte_cnt_tbl)(struct iwl_priv *priv, struct iwl4965_tx_queue *txq, u16 byte_cnt); + /* setup Rx handler */ + void (*rx_handler_setup)(struct iwl_priv *priv); /* nic init */ int (*hw_nic_init)(struct iwl_priv *priv); /* alive notification */ @@ -108,6 +117,15 @@ struct iwl_lib_ops { int (*load_ucode)(struct iwl_priv *priv); /* rfkill */ void (*radio_kill_sw)(struct iwl_priv *priv, int disable_radio); + /* power management */ + struct { + int (*init)(struct iwl_priv *priv); + void (*config)(struct iwl_priv *priv); + int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src); + } apm_ops; + /* power */ + int (*set_power)(struct iwl_priv *priv, void *cmd); + void (*update_chain_flags)(struct iwl_priv *priv); /* eeprom operations (as defined in iwl-eeprom.h) */ struct iwl_eeprom_ops eeprom_ops; }; @@ -133,6 +151,7 @@ struct iwl_cfg { const char *name; const char *fw_name; unsigned int sku; + int eeprom_size; const struct iwl_ops *ops; const struct iwl_mod_params *mod_params; }; @@ -143,13 +162,15 @@ struct iwl_cfg { struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, struct ieee80211_ops *hw_ops); +void iwl_hw_detect(struct iwl_priv *priv); void iwlcore_clear_stations_table(struct iwl_priv *priv); -void iwlcore_reset_qos(struct iwl_priv *priv); -int iwlcore_set_rxon_channel(struct iwl_priv *priv, +void iwl_reset_qos(struct iwl_priv *priv); +void iwl_set_rxon_chain(struct iwl_priv *priv); +int iwl_set_rxon_channel(struct iwl_priv *priv, enum ieee80211_band band, u16 channel); - +void iwlcore_free_geos(struct iwl_priv *priv); int iwl_setup(struct iwl_priv *priv); /***************************************************** @@ -235,6 +256,7 @@ enum iwlcore_card_notify { int iwlcore_low_level_notify(struct iwl_priv *priv, enum iwlcore_card_notify notify); extern int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags); +extern int iwl_verify_ucode(struct iwl_priv *priv); int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_link_quality_cmd *lq, u8 flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 12725796ea5..9d6e5d2072d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -95,8 +95,7 @@ #define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) #define CSR_LED_REG (CSR_BASE+0x094) -/* Analog phase-lock-loop configuration (3945 only) - * Set bit 24. */ +/* Analog phase-lock-loop configuration */ #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) /* * Indicates hardware rev, to determine CCK backoff for txpower calculation. @@ -107,9 +106,9 @@ /* Bits for CSR_HW_IF_CONFIG_REG */ #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) -#define CSR49_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) -#define CSR49_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) -#define CSR49_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) +#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) +#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) +#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100) #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200) @@ -170,6 +169,10 @@ #define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ CSR_FH_INT_BIT_TX_CHNL0) +/* GPIO */ +#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) +#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) +#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) /* RESET */ #define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) @@ -191,6 +194,16 @@ #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) +/* HW REV */ +#define CSR_HW_REV_TYPE_MSK (0x00000F0) +#define CSR_HW_REV_TYPE_3945 (0x00000D0) +#define CSR_HW_REV_TYPE_4965 (0x0000000) +#define CSR_HW_REV_TYPE_5300 (0x0000020) +#define CSR_HW_REV_TYPE_5350 (0x0000030) +#define CSR_HW_REV_TYPE_5100 (0x0000050) +#define CSR_HW_REV_TYPE_5150 (0x0000040) +#define CSR_HW_REV_TYPE_NONE (0x00000F0) + /* EEPROM REG */ #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) #define CSR_EEPROM_REG_BIT_CMD (0x00000002) @@ -206,11 +219,6 @@ #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) -/* GPIO */ -#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) -#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) -#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC CSR_GPIO_IN_BIT_AUX_POWER - /* GI Chicken Bits */ #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) @@ -220,6 +228,10 @@ #define CSR_LED_REG_TRUN_ON (0x78) #define CSR_LED_REG_TRUN_OFF (0x38) +/* ANA_PLL */ +#define CSR39_ANA_PLL_CFG_VAL (0x01000000) +#define CSR50_ANA_PLL_CFG_VAL (0x00880300) + /*=== HBUS (Host-side Bus) ===*/ #define HBUS_BASE (0x400) /* diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index 9a30e1df311..30914453de1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -34,7 +34,7 @@ #include <net/mac80211.h> -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-debug.h" #include "iwl-core.h" #include "iwl-io.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 581b98556c8..78aba21bc18 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -24,8 +24,8 @@ * *****************************************************************************/ /* - * Please use this file (iwl-4965.h) for driver implementation definitions. - * Please use iwl-4965-commands.h for uCode API definitions. + * Please use this file (iwl-dev.h) for driver implementation definitions. + * Please use iwl-commands.h for uCode API definitions. * Please use iwl-4965-hw.h for hardware-related definitions. */ @@ -44,9 +44,13 @@ #include "iwl-prph.h" #include "iwl-debug.h" #include "iwl-led.h" +#include "iwl-power.h" /* configuration for the iwl4965 */ extern struct iwl_cfg iwl4965_agn_cfg; +extern struct iwl_cfg iwl5300_agn_cfg; +extern struct iwl_cfg iwl5100_agn_cfg; +extern struct iwl_cfg iwl5350_agn_cfg; /* Change firmware file name, using "-" and incrementing number, * *only* when uCode interface or architecture changes so that it @@ -54,6 +58,8 @@ extern struct iwl_cfg iwl4965_agn_cfg; * This number will also appear in << 8 position of 1st dword of uCode file */ #define IWL4965_UCODE_API "-1" +/* CT-KILL constants */ +#define CT_KILL_THRESHOLD 110 /* in Celsius */ /* Default noise level to report when noise measurement is not available. * This may be because we're: @@ -68,12 +74,6 @@ extern struct iwl_cfg iwl4965_agn_cfg; * averages within an s8's (used in some apps) range of negative values. */ #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) -enum iwl4965_antenna { - IWL_ANTENNA_DIVERSITY, - IWL_ANTENNA_MAIN, - IWL_ANTENNA_AUX -}; - /* * RTS threshold here is total size [2347] minus 4 FCS bytes * Per spec: @@ -199,9 +199,9 @@ enum { struct iwl_channel_info { struct iwl4965_channel_tgd_info tgd; struct iwl4965_channel_tgh_info tgh; - struct iwl4965_eeprom_channel eeprom; /* EEPROM regulatory limit */ - struct iwl4965_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for - * FAT channel */ + struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ + struct iwl_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for + * FAT channel */ u8 channel; /* channel number */ u8 flags; /* flags copied from EEPROM */ @@ -252,29 +252,9 @@ struct iwl4965_clip_group { /* Power management (not Tx power) structures */ -struct iwl4965_power_vec_entry { - struct iwl4965_powertable_cmd cmd; - u8 no_dtim; -}; -#define IWL_POWER_RANGE_0 (0) -#define IWL_POWER_RANGE_1 (1) - -#define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ -#define IWL_POWER_INDEX_3 0x03 -#define IWL_POWER_INDEX_5 0x05 -#define IWL_POWER_AC 0x06 -#define IWL_POWER_BATTERY 0x07 -#define IWL_POWER_LIMIT 0x07 -#define IWL_POWER_MASK 0x0F -#define IWL_POWER_ENABLED 0x10 -#define IWL_POWER_LEVEL(x) ((x) & IWL_POWER_MASK) - -struct iwl4965_power_mgr { - spinlock_t lock; - struct iwl4965_power_vec_entry pwr_range_0[IWL_POWER_AC]; - struct iwl4965_power_vec_entry pwr_range_1[IWL_POWER_AC]; - u8 active_index; - u32 dtim_val; +enum iwl_pwr_src { + IWL_PWR_SRC_VMAIN, + IWL_PWR_SRC_VAUX, }; #define IEEE80211_DATA_LEN 2304 @@ -566,16 +546,49 @@ struct iwl4965_ibss_seq { struct list_head list; }; +struct iwl_sensitivity_ranges { + u16 min_nrg_cck; + u16 max_nrg_cck; + + u16 nrg_th_cck; + u16 nrg_th_ofdm; + + u16 auto_corr_min_ofdm; + u16 auto_corr_min_ofdm_mrc; + u16 auto_corr_min_ofdm_x1; + u16 auto_corr_min_ofdm_mrc_x1; + + u16 auto_corr_max_ofdm; + u16 auto_corr_max_ofdm_mrc; + u16 auto_corr_max_ofdm_x1; + u16 auto_corr_max_ofdm_mrc_x1; + + u16 auto_corr_max_cck; + u16 auto_corr_max_cck_mrc; + u16 auto_corr_min_cck; + u16 auto_corr_min_cck_mrc; +}; + + +#define IWL_FAT_CHANNEL_52 BIT(IEEE80211_BAND_5GHZ) + /** * struct iwl_hw_params * @max_txq_num: Max # Tx queues supported * @tx_cmd_len: Size of Tx command (but not including frame itself) - * @tx_ant_num: Number of TX antennas + * @tx/rx_chains_num: Number of TX/RX chains + * @valid_tx/rx_ant: usable antennas * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) - * @rx_buffer_size: * @max_rxq_log: Log-base-2 of max_rxq_size + * @rx_buf_size: Rx buffer size * @max_stations: * @bcast_sta_id: + * @fat_channel: is 40MHz width possible in band 2.4 + * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) + * @sw_crypto: 0 for hw, 1 for sw + * @max_xxx_size: for ucode uses + * @ct_kill_threshold: temperature threshold + * @struct iwl_sensitivity_ranges: range of sensitivity values */ struct iwl_hw_params { u16 max_txq_num; @@ -590,10 +603,19 @@ struct iwl_hw_params { u32 max_pkt_size; u8 max_stations; u8 bcast_sta_id; + u8 fat_channel; + u8 sw_crypto; + u32 max_inst_size; + u32 max_data_size; + u32 max_bsm_size; + u32 ct_kill_threshold; /* value in hw-dependent units */ +#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB + const struct iwl_sensitivity_ranges *sens; +#endif }; -#define HT_SHORT_GI_20MHZ_ONLY (1 << 0) -#define HT_SHORT_GI_40MHZ_ONLY (1 << 1) +#define HT_SHORT_GI_20MHZ_ONLY (1 << 0) +#define HT_SHORT_GI_40MHZ_ONLY (1 << 1) #define IWL_RX_HDR(x) ((struct iwl4965_rx_frame_hdr *)(\ @@ -641,10 +663,10 @@ extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, const u8 *dest, int left); extern int iwl4965_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl4965_rx_queue *q); -extern void iwl4965_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb, - u32 decrypt_res, - struct ieee80211_rx_status *stats); extern __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr); +extern void iwl4965_update_chain_flags(struct iwl_priv *priv); +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); + int iwl4965_init_geos(struct iwl_priv *priv); void iwl4965_free_geos(struct iwl_priv *priv); @@ -674,7 +696,6 @@ extern u8 iwl4965_sync_station(struct iwl_priv *priv, int sta_id, * iwl4965_mac_ <-- mac80211 callback * ****************************************************************************/ -extern void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv); extern void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv); extern void iwl4965_hw_cancel_deferred_work(struct iwl_priv *priv); extern int iwl4965_hw_rxq_stop(struct iwl_priv *priv); @@ -706,14 +727,14 @@ extern void iwl4965_disable_events(struct iwl_priv *priv); extern int iwl4965_get_temperature(const struct iwl_priv *priv); /** - * iwl4965_hw_find_station - Find station id for a given BSSID + * iwl_find_station - Find station id for a given BSSID * @bssid: MAC address of station ID to find * * NOTE: This should not be hardware specific but the code has * not yet been merged into a single common layer for managing the * station tables. */ -extern u8 iwl4965_hw_find_station(struct iwl_priv *priv, const u8 *bssid); +extern u8 iwl_find_station(struct iwl_priv *priv, const u8 *bssid); extern int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel); extern int iwl4965_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index); @@ -729,21 +750,17 @@ extern int iwl4965_tx_queue_update_wr_ptr(struct iwl_priv *priv, u16 byte_cnt); extern void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap); -extern void iwl4965_set_rxon_chain(struct iwl_priv *priv); extern int iwl4965_alive_notify(struct iwl_priv *priv); extern void iwl4965_update_rate_scaling(struct iwl_priv *priv, u8 mode); -extern void iwl4965_chain_noise_reset(struct iwl_priv *priv); -extern void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags, - u8 force); extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); extern void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, struct ieee80211_tx_control *control); #ifdef CONFIG_IWL4965_HT -void iwl4965_init_ht_hw_capab(struct iwl_priv *priv, - struct ieee80211_ht_info *ht_info, - enum ieee80211_band band); +extern void iwl4965_init_ht_hw_capab(const struct iwl_priv *priv, + struct ieee80211_ht_info *ht_info, + enum ieee80211_band band); void iwl4965_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info); void iwl4965_set_ht_add_station(struct iwl_priv *priv, u8 index, @@ -754,7 +771,7 @@ int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id); #else -static inline void iwl4965_init_ht_hw_capab(struct iwl_priv *priv, +static inline void iwl4965_init_ht_hw_capab(const struct iwl_priv *priv, struct ieee80211_ht_info *ht_info, enum ieee80211_band band) {} @@ -787,8 +804,8 @@ struct iwl4965_kw { #define IWL_EXT_CHANNEL_OFFSET_RESERVE1 2 #define IWL_EXT_CHANNEL_OFFSET_BELOW 3 -#define NRG_NUM_PREV_STAT_L 20 -#define NUM_RX_CHAINS (3) +#define IWL_TX_CRC_SIZE 4 +#define IWL_TX_DELIMITER_SIZE 4 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 @@ -818,23 +835,8 @@ struct iwl4965_lq_mngr { #define MAX_FA_CCK 50 #define MIN_FA_CCK 5 -#define NRG_MIN_CCK 97 -#define NRG_MAX_CCK 0 - -#define AUTO_CORR_MIN_OFDM 85 -#define AUTO_CORR_MIN_OFDM_MRC 170 -#define AUTO_CORR_MIN_OFDM_X1 105 -#define AUTO_CORR_MIN_OFDM_MRC_X1 220 -#define AUTO_CORR_MAX_OFDM 120 -#define AUTO_CORR_MAX_OFDM_MRC 210 -#define AUTO_CORR_MAX_OFDM_X1 140 -#define AUTO_CORR_MAX_OFDM_MRC_X1 270 #define AUTO_CORR_STEP_OFDM 1 -#define AUTO_CORR_MIN_CCK (125) -#define AUTO_CORR_MAX_CCK (200) -#define AUTO_CORR_MIN_CCK_MRC 200 -#define AUTO_CORR_MAX_CCK_MRC 400 #define AUTO_CORR_STEP_CCK 3 #define AUTO_CORR_MAX_TH_CCK 160 @@ -853,6 +855,9 @@ struct iwl4965_lq_mngr { #define IN_BAND_FILTER 0xFF #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF +#define NRG_NUM_PREV_STAT_L 20 +#define NUM_RX_CHAINS 3 + enum iwl4965_false_alarm_state { IWL_FA_TOO_MANY = 0, IWL_FA_TOO_FEW = 1, @@ -865,11 +870,6 @@ enum iwl4965_chain_noise_state { IWL_CHAIN_NOISE_CALIBRATED = 2, }; -enum iwl4965_sensitivity_state { - IWL_SENS_CALIB_ALLOWED = 0, - IWL_SENS_CALIB_NEED_REINIT = 1, -}; - enum iwl4965_calib_enabled_state { IWL_CALIB_DISABLED = 0, /* must be 0 */ IWL_CALIB_ENABLED = 1, @@ -884,8 +884,9 @@ struct statistics_general_data { u32 beacon_energy_c; }; +#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB /* Sensitivity calib data */ -struct iwl4965_sensitivity_data { +struct iwl_sensitivity_data { u32 auto_corr_ofdm; u32 auto_corr_ofdm_mrc; u32 auto_corr_ofdm_x1; @@ -909,12 +910,10 @@ struct iwl4965_sensitivity_data { s32 nrg_auto_corr_silence_diff; u32 num_in_cck_no_fa; u32 nrg_th_ofdm; - - u8 state; }; /* Chain noise (differential Rx gain) calib data */ -struct iwl4965_chain_noise_data { +struct iwl_chain_noise_data { u8 state; u16 beacon_count; u32 chain_noise_a; @@ -927,6 +926,7 @@ struct iwl4965_chain_noise_data { u8 delta_gain_code[NUM_RX_CHAINS]; u8 radio_write; }; +#endif /* CONFIG_IWLWIFI_RUN_TIME_CALIB */ #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ @@ -1007,6 +1007,9 @@ struct iwl_priv { /* pci hardware address support */ void __iomem *hw_base; + u32 hw_rev; + u32 hw_wa_rev; + u8 rev_id; /* uCode images, save to reload in case of failure */ struct fw_desc ucode_code; /* runtime inst */ @@ -1050,13 +1053,12 @@ struct iwl_priv { u8 assoc_station_added; u8 use_ant_b_for_management_frame; /* Tx antenna selection */ - u8 valid_antenna; /* Bit mask of antennas actually connected */ -#ifdef CONFIG_IWL4965_SENSITIVITY - struct iwl4965_sensitivity_data sensitivity_data; - struct iwl4965_chain_noise_data chain_noise_data; u8 start_calib; +#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB + struct iwl_sensitivity_data sensitivity_data; + struct iwl_chain_noise_data chain_noise_data; __le16 sensitivity_tbl[HD_TABLE_SIZE]; -#endif /*CONFIG_IWL4965_SENSITIVITY*/ +#endif /*CONFIG_IWLWIFI_RUN_TIME_CALIB*/ #ifdef CONFIG_IWL4965_HT struct iwl_ht_info current_ht_config; @@ -1092,7 +1094,7 @@ struct iwl_priv { u64 bytes; } tx_stats[3], rx_stats[3]; - struct iwl4965_power_mgr power_data; + struct iwl_power_mgr power_data; struct iwl4965_notif_statistics statistics; unsigned long last_statistics_time; @@ -1137,7 +1139,8 @@ struct iwl_priv { struct list_head ibss_mac_hash[IWL_IBSS_MAC_HASH_SIZE]; /* eeprom */ - struct iwl4965_eeprom eeprom; + u8 *eeprom; + struct iwl_eeprom_calib_info *calib_info; enum ieee80211_if_types iw_mode; @@ -1206,7 +1209,7 @@ struct iwl_priv { #endif /* CONFIG_IWLWIFI_DEBUG */ struct work_struct txpower_work; -#ifdef CONFIG_IWL4965_SENSITIVITY +#ifdef CONFIG_IWL4965_RUN_TIME_CALIB struct work_struct sensitivity_work; #endif struct timer_list statistics_periodic; @@ -1224,11 +1227,6 @@ static inline int is_channel_valid(const struct iwl_channel_info *ch_info) return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; } -static inline int is_channel_narrow(const struct iwl_channel_info *ch_info) -{ - return (ch_info->flags & EEPROM_CHANNEL_NARROW) ? 1 : 0; -} - static inline int is_channel_radar(const struct iwl_channel_info *ch_info) { return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index a07d5dcb7ab..fa306601a55 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -68,8 +68,8 @@ #include <net/mac80211.h> -#include "iwl-4965-commands.h" -#include "iwl-4965.h" +#include "iwl-commands.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-debug.h" #include "iwl-eeprom.h" @@ -193,6 +193,12 @@ void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv) } EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore); +const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) +{ + BUG_ON(offset >= priv->cfg->eeprom_size); + return &priv->eeprom[offset]; +} +EXPORT_SYMBOL(iwlcore_eeprom_query_addr); /** * iwl_eeprom_init - read EEPROM contents @@ -203,30 +209,35 @@ EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore); */ int iwl_eeprom_init(struct iwl_priv *priv) { - u16 *e = (u16 *)&priv->eeprom; + u16 *e; u32 gp = iwl_read32(priv, CSR_EEPROM_GP); u32 r; - int sz = sizeof(priv->eeprom); + int sz = priv->cfg->eeprom_size; int ret; int i; u16 addr; - /* The EEPROM structure has several padding buffers within it - * and when adding new EEPROM maps is subject to programmer errors - * which may be very difficult to identify without explicitly - * checking the resulting size of the eeprom map. */ - BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE); + /* allocate eeprom */ + priv->eeprom = kzalloc(sz, GFP_KERNEL); + if (!priv->eeprom) { + ret = -ENOMEM; + goto alloc_err; + } + e = (u16 *)priv->eeprom; - if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) { + ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv); + if (ret < 0) { IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp); - return -ENOENT; + ret = -ENOENT; + goto err; } /* Make sure driver (instead of uCode) is allowed to read EEPROM */ ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv); if (ret < 0) { IWL_ERROR("Failed to acquire EEPROM semaphore.\n"); - return -ENOENT; + ret = -ENOENT; + goto err; } /* eeprom is an array of 16bit values */ @@ -250,61 +261,98 @@ int iwl_eeprom_init(struct iwl_priv *priv) e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16)); } ret = 0; - done: priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv); +err: + if (ret) + kfree(priv->eeprom); +alloc_err: return ret; } EXPORT_SYMBOL(iwl_eeprom_init); +void iwl_eeprom_free(struct iwl_priv *priv) +{ + if(priv->eeprom) + kfree(priv->eeprom); + priv->eeprom = NULL; +} +EXPORT_SYMBOL(iwl_eeprom_free); + +int iwl_eeprom_check_version(struct iwl_priv *priv) +{ + return priv->cfg->ops->lib->eeprom_ops.check_version(priv); +} +EXPORT_SYMBOL(iwl_eeprom_check_version); + +const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) +{ + return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset); +} +EXPORT_SYMBOL(iwl_eeprom_query_addr); + +u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset) +{ + return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8); +} +EXPORT_SYMBOL(iwl_eeprom_query16); void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac) { - memcpy(mac, priv->eeprom.mac_address, 6); + const u8 *addr = priv->cfg->ops->lib->eeprom_ops.query_addr(priv, + EEPROM_MAC_ADDRESS); + memcpy(mac, addr, ETH_ALEN); } EXPORT_SYMBOL(iwl_eeprom_get_mac); static void iwl_init_band_reference(const struct iwl_priv *priv, - int band, - int *eeprom_ch_count, - const struct iwl4965_eeprom_channel - **eeprom_ch_info, - const u8 **eeprom_ch_index) + int eep_band, int *eeprom_ch_count, + const struct iwl_eeprom_channel **eeprom_ch_info, + const u8 **eeprom_ch_index) { - switch (band) { + u32 offset = priv->cfg->ops->lib-> + eeprom_ops.regulatory_bands[eep_band - 1]; + switch (eep_band) { case 1: /* 2.4GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); - *eeprom_ch_info = priv->eeprom.band_1_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_1; break; case 2: /* 4.9GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); - *eeprom_ch_info = priv->eeprom.band_2_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_2; break; case 3: /* 5.2GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); - *eeprom_ch_info = priv->eeprom.band_3_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_3; break; case 4: /* 5.5GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); - *eeprom_ch_info = priv->eeprom.band_4_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_4; break; case 5: /* 5.7GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); - *eeprom_ch_info = priv->eeprom.band_5_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_5; break; case 6: /* 2.4GHz FAT channels */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); - *eeprom_ch_info = priv->eeprom.band_24_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_6; break; case 7: /* 5 GHz FAT channels */ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); - *eeprom_ch_info = priv->eeprom.band_52_channels; + *eeprom_ch_info = (struct iwl_eeprom_channel *) + iwl_eeprom_query_addr(priv, offset); *eeprom_ch_index = iwl_eeprom_band_7; break; default: @@ -323,7 +371,7 @@ static void iwl_init_band_reference(const struct iwl_priv *priv, */ static int iwl4965_set_fat_chan_info(struct iwl_priv *priv, enum ieee80211_band band, u16 channel, - const struct iwl4965_eeprom_channel *eeprom_ch, + const struct iwl_eeprom_channel *eeprom_ch, u8 fat_extension_channel) { struct iwl_channel_info *ch_info; @@ -334,7 +382,7 @@ static int iwl4965_set_fat_chan_info(struct iwl_priv *priv, if (!is_channel_valid(ch_info)) return -1; - IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x" + IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x" " %ddBm): Ad-Hoc %ssupported\n", ch_info->channel, is_channel_a_band(ch_info) ? @@ -343,7 +391,6 @@ static int iwl4965_set_fat_chan_info(struct iwl_priv *priv, CHECK_AND_PRINT(ACTIVE), CHECK_AND_PRINT(RADAR), CHECK_AND_PRINT(WIDE), - CHECK_AND_PRINT(NARROW), CHECK_AND_PRINT(DFS), eeprom_ch->flags, eeprom_ch->max_power_avg, @@ -372,7 +419,7 @@ int iwl_init_channel_map(struct iwl_priv *priv) { int eeprom_ch_count = 0; const u8 *eeprom_ch_index = NULL; - const struct iwl4965_eeprom_channel *eeprom_ch_info = NULL; + const struct iwl_eeprom_channel *eeprom_ch_info = NULL; int band, ch; struct iwl_channel_info *ch_info; @@ -381,12 +428,6 @@ int iwl_init_channel_map(struct iwl_priv *priv) return 0; } - if (priv->eeprom.version < 0x2f) { - IWL_WARNING("Unsupported EEPROM version: 0x%04X\n", - priv->eeprom.version); - return -EINVAL; - } - IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n"); priv->channel_count = @@ -447,7 +488,7 @@ int iwl_init_channel_map(struct iwl_priv *priv) ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; ch_info->min_power = 0; - IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x" + IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x" " %ddBm): Ad-Hoc %ssupported\n", ch_info->channel, is_channel_a_band(ch_info) ? @@ -457,7 +498,6 @@ int iwl_init_channel_map(struct iwl_priv *priv) CHECK_AND_PRINT_I(ACTIVE), CHECK_AND_PRINT_I(RADAR), CHECK_AND_PRINT_I(WIDE), - CHECK_AND_PRINT_I(NARROW), CHECK_AND_PRINT_I(DFS), eeprom_ch_info[ch].flags, eeprom_ch_info[ch].max_power_avg, diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index bd0a042ca77..dc1f027c66a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -106,7 +106,7 @@ enum { EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ - EEPROM_CHANNEL_NARROW = (1 << 6), /* 10 MHz channel (not used) */ + /* Bit 6 Reserved (was Narrow Channel) */ EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ }; @@ -116,7 +116,7 @@ enum { /* *regulatory* channel data format in eeprom, one for each channel. * There are separate entries for FAT (40 MHz) vs. normal (20 MHz) channels. */ -struct iwl4965_eeprom_channel { +struct iwl_eeprom_channel { u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ } __attribute__ ((packed)); @@ -131,17 +131,54 @@ struct iwl4965_eeprom_channel { * each of 3 target output levels */ #define EEPROM_TX_POWER_MEASUREMENTS (3) -#define EEPROM_4965_TX_POWER_VERSION (2) +/* 4965 Specific */ +/* 4965 driver does not work with txpower calibration version < 5 */ +#define EEPROM_4965_TX_POWER_VERSION (5) +#define EEPROM_4965_EEPROM_VERSION (0x2f) +#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */ +#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */ +#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */ +#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */ + +/* 5000 Specific */ +#define EEPROM_5000_TX_POWER_VERSION (4) +#define EEPROM_5000_EEPROM_VERSION (0x11A) + +/*5000 calibrations */ +#define EEPROM_5000_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) + +/* 5000 links */ +#define EEPROM_5000_LINK_HOST (2*0x64) +#define EEPROM_5000_LINK_GENERAL (2*0x65) +#define EEPROM_5000_LINK_REGULATORY (2*0x66) +#define EEPROM_5000_LINK_CALIBRATION (2*0x67) +#define EEPROM_5000_LINK_PROCESS_ADJST (2*0x68) +#define EEPROM_5000_LINK_OTHERS (2*0x69) + +/* 5000 regulatory - indirect access */ +#define EEPROM_5000_REG_SKU_ID ((0x02)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 4 bytes */ +#define EEPROM_5000_REG_BAND_1_CHANNELS ((0x08)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */ +#define EEPROM_5000_REG_BAND_2_CHANNELS ((0x26)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */ +#define EEPROM_5000_REG_BAND_3_CHANNELS ((0x42)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ +#define EEPROM_5000_REG_BAND_4_CHANNELS ((0x5C)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ +#define EEPROM_5000_REG_BAND_5_CHANNELS ((0x74)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ +#define EEPROM_5000_REG_BAND_24_FAT_CHANNELS ((0x82)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ +#define EEPROM_5000_REG_BAND_52_FAT_CHANNELS ((0x92)\ + | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ -/* 4965 driver does not work with txpower calibration version < 5. - * Look for this in calib_version member of struct iwl4965_eeprom. */ -#define EEPROM_TX_POWER_VERSION_NEW (5) /* 2.4 GHz */ extern const u8 iwl_eeprom_band_1[14]; /* - * 4965 factory calibration data for one txpower level, on one channel, + * factory calibration data for one txpower level, on one channel, * measured on one of the 2 tx chains (radio transmitter and associated * antenna). EEPROM contains: * @@ -154,7 +191,7 @@ extern const u8 iwl_eeprom_band_1[14]; * * 4) RF power amplifier detector level measurement (not used). */ -struct iwl4965_eeprom_calib_measure { +struct iwl_eeprom_calib_measure { u8 temperature; /* Device temperature (Celsius) */ u8 gain_idx; /* Index into gain table */ u8 actual_pow; /* Measured RF output power, half-dBm */ @@ -163,22 +200,22 @@ struct iwl4965_eeprom_calib_measure { /* - * 4965 measurement set for one channel. EEPROM contains: + * measurement set for one channel. EEPROM contains: * * 1) Channel number measured * * 2) Measurements for each of 3 power levels for each of 2 radio transmitters * (a.k.a. "tx chains") (6 measurements altogether) */ -struct iwl4965_eeprom_calib_ch_info { +struct iwl_eeprom_calib_ch_info { u8 ch_num; - struct iwl4965_eeprom_calib_measure + struct iwl_eeprom_calib_measure measurements[EEPROM_TX_POWER_TX_CHAINS] [EEPROM_TX_POWER_MEASUREMENTS]; } __attribute__ ((packed)); /* - * 4965 txpower subband info. + * txpower subband info. * * For each frequency subband, EEPROM contains the following: * @@ -187,16 +224,16 @@ struct iwl4965_eeprom_calib_ch_info { * * 2) Sample measurement sets for 2 channels close to the range endpoints. */ -struct iwl4965_eeprom_calib_subband_info { +struct iwl_eeprom_calib_subband_info { u8 ch_from; /* channel number of lowest channel in subband */ u8 ch_to; /* channel number of highest channel in subband */ - struct iwl4965_eeprom_calib_ch_info ch1; - struct iwl4965_eeprom_calib_ch_info ch2; + struct iwl_eeprom_calib_ch_info ch1; + struct iwl_eeprom_calib_ch_info ch2; } __attribute__ ((packed)); /* - * 4965 txpower calibration info. EEPROM contains: + * txpower calibration info. EEPROM contains: * * 1) Factory-measured saturation power levels (maximum levels at which * tx power amplifier can output a signal without too much distortion). @@ -212,55 +249,58 @@ struct iwl4965_eeprom_calib_subband_info { * characteristics of the analog radio circuitry vary with frequency. * * Not all sets need to be filled with data; - * struct iwl4965_eeprom_calib_subband_info contains range of channels + * struct iwl_eeprom_calib_subband_info contains range of channels * (0 if unused) for each set of data. */ -struct iwl4965_eeprom_calib_info { +struct iwl_eeprom_calib_info { u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ u8 saturation_power52; /* half-dBm */ s16 voltage; /* signed */ - struct iwl4965_eeprom_calib_subband_info + struct iwl_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; } __attribute__ ((packed)); - -/* - * 4965 EEPROM map - */ -struct iwl4965_eeprom { - u8 reserved0[16]; - u16 device_id; /* abs.ofs: 16 */ - u8 reserved1[2]; - u16 pmc; /* abs.ofs: 20 */ - u8 reserved2[20]; - u8 mac_address[6]; /* abs.ofs: 42 */ - u8 reserved3[58]; - u16 board_revision; /* abs.ofs: 106 */ - u8 reserved4[11]; - u8 board_pba_number[9]; /* abs.ofs: 119 */ - u8 reserved5[8]; - u16 version; /* abs.ofs: 136 */ - u8 sku_cap; /* abs.ofs: 138 */ - u8 leds_mode; /* abs.ofs: 139 */ - u16 oem_mode; - u16 wowlan_mode; /* abs.ofs: 142 */ - u16 leds_time_interval; /* abs.ofs: 144 */ - u8 leds_off_time; /* abs.ofs: 146 */ - u8 leds_on_time; /* abs.ofs: 147 */ - u8 almgor_m_version; /* abs.ofs: 148 */ - u8 antenna_switch_type; /* abs.ofs: 149 */ - u8 reserved6[8]; - u16 board_revision_4965; /* abs.ofs: 158 */ - u8 reserved7[13]; - u8 board_pba_number_4965[9]; /* abs.ofs: 173 */ - u8 reserved8[10]; - u8 sku_id[4]; /* abs.ofs: 192 */ +#define ADDRESS_MSK 0x0000FFFF +#define INDIRECT_TYPE_MSK 0x000F0000 +#define INDIRECT_HOST 0x00010000 +#define INDIRECT_GENERAL 0x00020000 +#define INDIRECT_REGULATORY 0x00030000 +#define INDIRECT_CALIBRATION 0x00040000 +#define INDIRECT_PROCESS_ADJST 0x00050000 +#define INDIRECT_OTHERS 0x00060000 +#define INDIRECT_ADDRESS 0x00100000 + +/* General */ +#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ +#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ +#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ +#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ +#define EEPROM_VERSION (2*0x44) /* 2 bytes */ +#define EEPROM_SKU_CAP (2*0x45) /* 1 bytes */ +#define EEPROM_LEDS_MODE (2*0x45+1) /* 1 bytes */ +#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ +#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */ +#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ +#define EEPROM_3945_M_VERSION (2*0x4A) /* 1 bytes */ +#define EEPROM_ANTENNA_SWITCH_TYPE (2*0x4A+1) /* 1 bytes */ + +/* The following masks are to be applied on EEPROM_RADIO_CONFIG */ +#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ +#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ +#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ +#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ +#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ +#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ + +#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0 +#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1 +#define EEPROM_5000_RF_CFG_TYPE_MAX 0x3 /* * Per-channel regulatory data. * - * Each channel that *might* be supported by 3945 or 4965 has a fixed location + * Each channel that *might* be supported by iwl has a fixed location * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory * txpower (MSB). * @@ -269,40 +309,38 @@ struct iwl4965_eeprom { * * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */ - u16 band_1_count; /* abs.ofs: 196 */ - struct iwl4965_eeprom_channel band_1_channels[14]; /* abs.ofs: 196 */ +#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */ +#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */ /* * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, * 5.0 GHz channels 7, 8, 11, 12, 16 * (4915-5080MHz) (none of these is ever supported) */ - u16 band_2_count; /* abs.ofs: 226 */ - struct iwl4965_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */ +#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */ /* * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 * (5170-5320MHz) */ - u16 band_3_count; /* abs.ofs: 254 */ - struct iwl4965_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */ +#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */ /* * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 * (5500-5700MHz) */ - u16 band_4_count; /* abs.ofs: 280 */ - struct iwl4965_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */ +#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */ /* * 5.7 GHz channels 145, 149, 153, 157, 161, 165 * (5725-5825MHz) */ - u16 band_5_count; /* abs.ofs: 304 */ - struct iwl4965_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */ - - u8 reserved10[2]; - +#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */ /* * 2.4 GHz FAT channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) @@ -319,52 +357,35 @@ struct iwl4965_eeprom { * * NOTE: 4965 does not support FAT channels on 2.4 GHz. */ - struct iwl4965_eeprom_channel band_24_channels[7]; /* abs.ofs: 320 */ - u8 reserved11[2]; +#define EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS (2*0xA0) /* 14 bytes */ /* * 5.2 GHz FAT channels 36 (40), 44 (48), 52 (56), 60 (64), * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161) */ - struct iwl4965_eeprom_channel band_52_channels[11]; /* abs.ofs: 336 */ - u8 reserved12[6]; - -/* - * 4965 driver requires txpower calibration format version 5 or greater. - * Driver does not work with txpower calibration version < 5. - * This value is simply a 16-bit number, no major/minor versions here. - */ - u16 calib_version; /* abs.ofs: 364 */ - u8 reserved13[2]; - u8 reserved14[96]; /* abs.ofs: 368 */ - -/* - * 4965 Txpower calibration data. - */ - struct iwl4965_eeprom_calib_info calib_info; /* abs.ofs: 464 */ - - u8 reserved16[140]; /* fill out to full 1024 byte block */ - - -} __attribute__ ((packed)); - -#define IWL_EEPROM_IMAGE_SIZE 1024 - -/* End of EEPROM */ +#define EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS (2*0xA8) /* 22 bytes */ struct iwl_eeprom_ops { + const u32 regulatory_bands[7]; int (*verify_signature) (struct iwl_priv *priv); int (*acquire_semaphore) (struct iwl_priv *priv); void (*release_semaphore) (struct iwl_priv *priv); + int (*check_version) (struct iwl_priv *priv); + const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset); }; void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac); int iwl_eeprom_init(struct iwl_priv *priv); +void iwl_eeprom_free(struct iwl_priv *priv); +int iwl_eeprom_check_version(struct iwl_priv *priv); +const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); +u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset); int iwlcore_eeprom_verify_signature(struct iwl_priv *priv); int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv); void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv); +const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); int iwl_init_channel_map(struct iwl_priv *priv); void iwl_free_channel_map(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h new file mode 100644 index 00000000000..944642450d3 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -0,0 +1,391 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +/****************************/ +/* Flow Handler Definitions */ +/****************************/ + +/** + * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) + * Addresses are offsets from device's PCI hardware base address. + */ +#define FH_MEM_LOWER_BOUND (0x1000) +#define FH_MEM_UPPER_BOUND (0x1EF0) + +/** + * Keep-Warm (KW) buffer base address. + * + * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the + * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency + * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host + * from going into a power-savings mode that would cause higher DRAM latency, + * and possible data over/under-runs, before all Tx/Rx is complete. + * + * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) + * of the buffer, which must be 4K aligned. Once this is set up, the 4965 + * automatically invokes keep-warm accesses when normal accesses might not + * be sufficient to maintain fast DRAM response. + * + * Bit fields: + * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned + */ +#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) + + +/** + * TFD Circular Buffers Base (CBBC) addresses + * + * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident + * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) + * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 + * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte + * aligned (address bits 0-7 must be 0). + * + * Bit fields in each pointer register: + * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned + */ +#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) + +/* Find TFD CB base pointer for given queue (range 0-15). */ +#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) + + +/** + * Rx SRAM Control and Status Registers (RSCSR) + * + * These registers provide handshake between driver and 4965 for the Rx queue + * (this queue handles *all* command responses, notifications, Rx data, etc. + * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx + * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can + * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer + * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 + * mapping between RBDs and RBs. + * + * Driver must allocate host DRAM memory for the following, and set the + * physical address of each into 4965 registers: + * + * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 + * entries (although any power of 2, up to 4096, is selectable by driver). + * Each entry (1 dword) points to a receive buffer (RB) of consistent size + * (typically 4K, although 8K or 16K are also selectable by driver). + * Driver sets up RB size and number of RBDs in the CB via Rx config + * register FH_MEM_RCSR_CHNL0_CONFIG_REG. + * + * Bit fields within one RBD: + * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned + * + * Driver sets physical address [35:8] of base of RBD circular buffer + * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. + * + * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers + * (RBs) have been filled, via a "write pointer", actually the index of + * the RB's corresponding RBD within the circular buffer. Driver sets + * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. + * + * Bit fields in lower dword of Rx status buffer (upper dword not used + * by driver; see struct iwl4965_shared, val0): + * 31-12: Not used by driver + * 11- 0: Index of last filled Rx buffer descriptor + * (4965 writes, driver reads this value) + * + * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must + * enter pointers to these RBs into contiguous RBD circular buffer entries, + * and update the 4965's "write" index register, + * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. + * + * This "write" index corresponds to the *next* RBD that the driver will make + * available, i.e. one RBD past the tail of the ready-to-fill RBDs within + * the circular buffer. This value should initially be 0 (before preparing any + * RBs), should be 8 after preparing the first 8 RBs (for example), and must + * wrap back to 0 at the end of the circular buffer (but don't wrap before + * "read" index has advanced past 1! See below). + * NOTE: 4965 EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. + * + * As the 4965 fills RBs (referenced from contiguous RBDs within the circular + * buffer), it updates the Rx status buffer in host DRAM, 2) described above, + * to tell the driver the index of the latest filled RBD. The driver must + * read this "read" index from DRAM after receiving an Rx interrupt from 4965. + * + * The driver must also internally keep track of a third index, which is the + * next RBD to process. When receiving an Rx interrupt, driver should process + * all filled but unprocessed RBs up to, but not including, the RB + * corresponding to the "read" index. For example, if "read" index becomes "1", + * driver may process the RB pointed to by RBD 0. Depending on volume of + * traffic, there may be many RBs to process. + * + * If read index == write index, 4965 thinks there is no room to put new data. + * Due to this, the maximum number of filled RBs is 255, instead of 256. To + * be safe, make sure that there is a gap of at least 2 RBDs between "write" + * and "read" indexes; that is, make sure that there are no more than 254 + * buffers waiting to be filled. + */ +#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) +#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) + +/** + * Physical base address of 8-byte Rx Status buffer. + * Bit fields: + * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. + */ +#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) + +/** + * Physical base address of Rx Buffer Descriptor Circular Buffer. + * Bit fields: + * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. + */ +#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) + +/** + * Rx write pointer (index, really!). + * Bit fields: + * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. + * NOTE: For 256-entry circular buffer, use only bits [7:0]. + */ +#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) +#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) + + +/** + * Rx Config/Status Registers (RCSR) + * Rx Config Reg for channel 0 (only channel used) + * + * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for + * normal operation (see bit fields). + * + * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. + * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for + * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. + * + * Bit fields: + * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29-24: reserved + * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), + * min "5" for 32 RBDs, max "12" for 4096 RBDs. + * 19-18: reserved + * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, + * '10' 12K, '11' 16K. + * 15-14: reserved + * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) + * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) + * typical value 0x10 (about 1/2 msec) + * 3- 0: reserved + */ +#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) +#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) + +#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) + +#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ +#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ +#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ + +#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20) +#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4) +#define RX_RB_TIMEOUT (0x10) + +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) + +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) + +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) + + +/** + * Rx Shared Status Registers (RSSR) + * + * After stopping Rx DMA channel (writing 0 to + * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll + * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. + * + * Bit fields: + * 24: 1 = Channel 0 is idle + * + * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV + * contain default values that should not be altered by the driver. + */ +#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) +#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) + +#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) +#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) +#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ + (FH_MEM_RSSR_LOWER_BOUND + 0x008) + +#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) + + +/** + * Transmit DMA Channel Control/Status Registers (TCSR) + * + * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels + * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, + * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. + * + * To use a Tx DMA channel, driver must initialize its + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: + * + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL + * + * All other bits should be 0. + * + * Bit fields: + * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29- 4: Reserved, set to "0" + * 3: Enable internal DMA requests (1, normal operation), disable (0) + * 2- 0: Reserved, set to "0" + */ +#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) +#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) + +/* Find Control/Status reg for given Tx DMA/FIFO channel */ +#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) + +#define FH_TCSR_CHNL_NUM (7) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) + +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) +#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl) +#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl + 0x4) +#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * _chnl + 0x8) + +/** + * Tx Shared Status Registers (TSSR) + * + * After stopping Tx DMA channel (writing 0 to + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll + * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle + * (channel's buffers empty | no pending requests). + * + * Bit fields: + * 31-24: 1 = Channel buffers empty (channel 7:0) + * 23-16: 1 = No pending requests (channel 7:0) + */ +#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) +#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) + +#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) + +#define FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) ((1 << (_chnl)) << 24) +#define FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) ((1 << (_chnl)) << 16) + +#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \ + (FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ + FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) + + + +#define FH_REGS_LOWER_BOUND (0x1000) +#define FH_REGS_UPPER_BOUND (0x2000) + +/* Tx service channels */ +#define FH_SRVC_CHNL (9) +#define FH_SRVC_LOWER_BOUND (FH_REGS_LOWER_BOUND + 0x9C8) +#define FH_SRVC_UPPER_BOUND (FH_REGS_LOWER_BOUND + 0x9D0) +#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ + (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) + +/* TFDB Area - TFDs buffer table */ +#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH_TFDIB_LOWER_BOUND (FH_REGS_LOWER_BOUND + 0x900) +#define FH_TFDIB_UPPER_BOUND (FH_REGS_LOWER_BOUND + 0x958) +#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) + +/* TCSR: tx_config register values */ +#define FH_RSCSR_FRAME_SIZE_MSK (0x00003FFF) /* bits 0-13 */ + diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index fdb27f1cdc0..acb5a8abd78 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -31,7 +31,7 @@ #include <linux/version.h> #include <net/mac80211.h> -#include "iwl-4965.h" /* FIXME: remove */ +#include "iwl-dev.h" /* FIXME: remove */ #include "iwl-debug.h" #include "iwl-eeprom.h" #include "iwl-core.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 03fdf5b434a..aa6ad18494c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -39,7 +39,7 @@ #include <linux/etherdevice.h> #include <asm/unaligned.h> -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-io.h" #include "iwl-helpers.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c new file mode 100644 index 00000000000..2e71803e09b --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -0,0 +1,423 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> + +#include <net/mac80211.h> + +#include "iwl-eeprom.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-commands.h" +#include "iwl-debug.h" +#include "iwl-power.h" +#include "iwl-helpers.h" + +/* + * Setting power level allow the card to go to sleep when not busy + * there are three factor that decide the power level to go to, they + * are list here with its priority + * 1- critical_power_setting this will be set according to card temperature. + * 2- system_power_setting this will be set by system PM manager. + * 3- user_power_setting this will be set by user either by writing to sys or + * mac80211 + * + * if system_power_setting and user_power_setting is set to auto + * the power level will be decided according to association status and battery + * status. + * + */ + +#define MSEC_TO_USEC 1024 +#define IWL_POWER_RANGE_0_MAX (2) +#define IWL_POWER_RANGE_1_MAX (10) + + +#define NOSLP __constant_cpu_to_le16(0), 0, 0 +#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 +#define SLP_TOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC) +#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \ + __constant_cpu_to_le32(X1), \ + __constant_cpu_to_le32(X2), \ + __constant_cpu_to_le32(X3), \ + __constant_cpu_to_le32(X4)} + +#define IWL_POWER_ON_BATTERY IWL_POWER_INDEX_5 +#define IWL_POWER_ON_AC_DISASSOC IWL_POWER_MODE_CAM +#define IWL_POWER_ON_AC_ASSOC IWL_POWER_MODE_CAM + + +#define IWL_CT_KILL_TEMPERATURE 110 +#define IWL_MIN_POWER_TEMPERATURE 100 +#define IWL_REDUCED_POWER_TEMPERATURE 95 + +/* default power management (not Tx power) table values */ +/* for tim 0-10 */ +static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = { + {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2} +}; + + +/* for tim = 3-10 */ +static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = { + {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2} +}; + +/* for tim > 11 */ +static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = { + {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, + {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, + {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} +}; + +/* decide the right power level according to association status + * and battery status + */ +static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) +{ + u16 mode = priv->power_data.user_power_setting; + + switch (priv->power_data.user_power_setting) { + case IWL_POWER_AUTO: + /* if running on battery */ + if (priv->power_data.is_battery_active) + mode = IWL_POWER_ON_BATTERY; + else if (iwl_is_associated(priv)) + mode = IWL_POWER_ON_AC_ASSOC; + else + mode = IWL_POWER_ON_AC_DISASSOC; + break; + case IWL_POWER_BATTERY: + mode = IWL_POWER_INDEX_3; + break; + case IWL_POWER_AC: + mode = IWL_POWER_MODE_CAM; + break; + } + return mode; +} + +/* initialize to default */ +static int iwl_power_init_handle(struct iwl_priv *priv) +{ + int ret = 0, i; + struct iwl_power_mgr *pow_data; + int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_AC; + u16 pci_pm; + + IWL_DEBUG_POWER("Initialize power \n"); + + pow_data = &(priv->power_data); + + memset(pow_data, 0, sizeof(*pow_data)); + + memcpy(&pow_data->pwr_range_0[0], &range_0[0], size); + memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); + memcpy(&pow_data->pwr_range_2[0], &range_2[0], size); + + ret = pci_read_config_word(priv->pci_dev, + PCI_LINK_CTRL, &pci_pm); + if (ret != 0) + return 0; + else { + struct iwl4965_powertable_cmd *cmd; + + IWL_DEBUG_POWER("adjust power command flags\n"); + + for (i = 0; i < IWL_POWER_AC; i++) { + cmd = &pow_data->pwr_range_0[i].cmd; + + if (pci_pm & 0x1) + cmd->flags &= ~IWL_POWER_PCI_PM_MSK; + else + cmd->flags |= IWL_POWER_PCI_PM_MSK; + } + } + return ret; +} + +/* adjust power command according to dtim period and power level*/ +static int iwl_update_power_command(struct iwl_priv *priv, + struct iwl4965_powertable_cmd *cmd, + u16 mode) +{ + int ret = 0, i; + u8 skip; + u32 max_sleep = 0; + struct iwl_power_vec_entry *range; + u8 period = 0; + struct iwl_power_mgr *pow_data; + + if (mode > IWL_POWER_INDEX_5) { + IWL_DEBUG_POWER("Error invalid power mode \n"); + return -1; + } + pow_data = &(priv->power_data); + + if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX) + range = &pow_data->pwr_range_0[0]; + else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX) + range = &pow_data->pwr_range_1[0]; + else + range = &pow_data->pwr_range_2[0]; + + period = pow_data->dtim_period; + memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd)); + + if (period == 0) { + period = 1; + skip = 0; + } else + skip = range[mode].no_dtim; + + if (skip == 0) { + max_sleep = period; + cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; + } else { + __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]; + max_sleep = le32_to_cpu(slp_itrvl); + if (max_sleep == 0xFF) + max_sleep = period * (skip + 1); + else if (max_sleep > period) + max_sleep = (le32_to_cpu(slp_itrvl) / period) * period; + cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; + } + + for (i = 0; i < IWL_POWER_VEC_SIZE; i++) { + if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) + cmd->sleep_interval[i] = cpu_to_le32(max_sleep); + } + + IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags); + IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); + IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); + IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n", + le32_to_cpu(cmd->sleep_interval[0]), + le32_to_cpu(cmd->sleep_interval[1]), + le32_to_cpu(cmd->sleep_interval[2]), + le32_to_cpu(cmd->sleep_interval[3]), + le32_to_cpu(cmd->sleep_interval[4])); + + return ret; +} + + +/* + * calucaute the final power mode index + */ +int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) +{ + struct iwl_power_mgr *setting = &(priv->power_data); + int ret = 0; + u16 uninitialized_var(final_mode); + + /* If on battery, set to 3, + * if plugged into AC power, set to CAM ("continuously aware mode"), + * else user level */ + + switch (setting->system_power_setting) { + case IWL_POWER_AUTO: + final_mode = iwl_get_auto_power_mode(priv); + break; + case IWL_POWER_BATTERY: + final_mode = IWL_POWER_INDEX_3; + break; + case IWL_POWER_AC: + final_mode = IWL_POWER_MODE_CAM; + break; + default: + final_mode = setting->system_power_setting; + } + + if (setting->critical_power_setting > final_mode) + final_mode = setting->critical_power_setting; + + /* driver only support CAM for non STA network */ + if (priv->iw_mode != IEEE80211_IF_TYPE_STA) + final_mode = IWL_POWER_MODE_CAM; + + if (!iwl_is_rfkill(priv) && !setting->power_disabled && + ((setting->power_mode != final_mode) || refresh)) { + struct iwl4965_powertable_cmd cmd; + + if (final_mode != IWL_POWER_MODE_CAM) + set_bit(STATUS_POWER_PMI, &priv->status); + + iwl_update_power_command(priv, &cmd, final_mode); + cmd.keep_alive_beacons = 0; + + if (final_mode == IWL_POWER_INDEX_5) + cmd.flags |= IWL_POWER_FAST_PD; + + if (priv->cfg->ops->lib->set_power) + ret = priv->cfg->ops->lib->set_power(priv, &cmd); + + if (final_mode == IWL_POWER_MODE_CAM) + clear_bit(STATUS_POWER_PMI, &priv->status); + else + set_bit(STATUS_POWER_PMI, &priv->status); + + if (priv->cfg->ops->lib->update_chain_flags) + priv->cfg->ops->lib->update_chain_flags(priv); + + if (!ret) + setting->power_mode = final_mode; + } + + return ret; +} +EXPORT_SYMBOL(iwl_power_update_mode); + +/* Allow other iwl code to disable/enable power management active + * this will be usefull for rate scale to disable PM during heavy + * Tx/Rx activities + */ +int iwl_power_disable_management(struct iwl_priv *priv) +{ + u16 prev_mode; + int ret = 0; + + if (priv->power_data.power_disabled) + return -EBUSY; + + prev_mode = priv->power_data.user_power_setting; + priv->power_data.user_power_setting = IWL_POWER_MODE_CAM; + ret = iwl_power_update_mode(priv, 0); + priv->power_data.power_disabled = 1; + priv->power_data.user_power_setting = prev_mode; + + return ret; +} +EXPORT_SYMBOL(iwl_power_disable_management); + +/* Allow other iwl code to disable/enable power management active + * this will be usefull for rate scale to disable PM during hight + * valume activities + */ +int iwl_power_enable_management(struct iwl_priv *priv) +{ + int ret = 0; + + priv->power_data.power_disabled = 0; + ret = iwl_power_update_mode(priv, 0); + return ret; +} +EXPORT_SYMBOL(iwl_power_enable_management); + +/* set user_power_setting */ +int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode) +{ + int ret = 0; + + if (mode > IWL_POWER_LIMIT) + return -EINVAL; + + priv->power_data.user_power_setting = mode; + + ret = iwl_power_update_mode(priv, 0); + + return ret; +} +EXPORT_SYMBOL(iwl_power_set_user_mode); + + +/* set system_power_setting. This should be set by over all + * PM application. + */ +int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode) +{ + int ret = 0; + + if (mode > IWL_POWER_LIMIT) + return -EINVAL; + + priv->power_data.system_power_setting = mode; + + ret = iwl_power_update_mode(priv, 0); + + return ret; +} +EXPORT_SYMBOL(iwl_power_set_system_mode); + +/* initilize to default */ +void iwl_power_initialize(struct iwl_priv *priv) +{ + + iwl_power_init_handle(priv); + priv->power_data.user_power_setting = IWL_POWER_AUTO; + priv->power_data.power_disabled = 0; + priv->power_data.system_power_setting = IWL_POWER_AUTO; + priv->power_data.is_battery_active = 0; + priv->power_data.power_disabled = 0; + priv->power_data.critical_power_setting = 0; +} +EXPORT_SYMBOL(iwl_power_initialize); + +/* set critical_power_setting according to temperature value */ +int iwl_power_temperature_change(struct iwl_priv *priv) +{ + int ret = 0; + u16 new_critical = priv->power_data.critical_power_setting; + s32 temperature = KELVIN_TO_CELSIUS(priv->last_temperature); + + if (temperature > IWL_CT_KILL_TEMPERATURE) + return 0; + else if (temperature > IWL_MIN_POWER_TEMPERATURE) + new_critical = IWL_POWER_INDEX_5; + else if (temperature > IWL_REDUCED_POWER_TEMPERATURE) + new_critical = IWL_POWER_INDEX_3; + else + new_critical = IWL_POWER_MODE_CAM; + + if (new_critical != priv->power_data.critical_power_setting) + priv->power_data.critical_power_setting = new_critical; + + if (priv->power_data.critical_power_setting > + priv->power_data.power_mode) + ret = iwl_power_update_mode(priv, 0); + + return ret; +} +EXPORT_SYMBOL(iwl_power_temperature_change); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h new file mode 100644 index 00000000000..b066724a1c2 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -0,0 +1,76 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * Portions of this file are derived from the ipw3945 project, as well + * as portions of the ieee80211 subsystem header files. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ +#ifndef __iwl_power_setting_h__ +#define __iwl_power_setting_h__ + +#include <net/mac80211.h> +#include "iwl-commands.h" + +struct iwl_priv; + +#define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ +#define IWL_POWER_INDEX_3 0x03 +#define IWL_POWER_INDEX_5 0x05 +#define IWL_POWER_AC 0x06 +#define IWL_POWER_BATTERY 0x07 +#define IWL_POWER_AUTO 0x08 +#define IWL_POWER_LIMIT 0x08 +#define IWL_POWER_MASK 0x0F +#define IWL_POWER_ENABLED 0x10 + +/* Power management (not Tx power) structures */ + +struct iwl_power_vec_entry { + struct iwl4965_powertable_cmd cmd; + u8 no_dtim; +}; + +struct iwl_power_mgr { + spinlock_t lock; + struct iwl_power_vec_entry pwr_range_0[IWL_POWER_AC]; + struct iwl_power_vec_entry pwr_range_1[IWL_POWER_AC]; + struct iwl_power_vec_entry pwr_range_2[IWL_POWER_AC]; + u32 dtim_period; + /* final power level that used to calculate final power command */ + u8 power_mode; + u8 user_power_setting; /* set by user through mac80211 or sysfs */ + u8 system_power_setting; /* set by kernel syatem tools */ + u8 critical_power_setting; /* set if driver over heated */ + u8 is_battery_active; /* DC/AC power */ + u8 power_disabled; /* flag to disable using power saving level */ +}; + +int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh); +int iwl_power_disable_management(struct iwl_priv *priv); +int iwl_power_enable_management(struct iwl_priv *priv); +int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode); +int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode); +void iwl_power_initialize(struct iwl_priv *priv); +int iwl_power_temperature_change(struct iwl_priv *priv); + +#endif /* __iwl_power_setting_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index c9cf8eef1a9..acac629386e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -239,40 +239,284 @@ #define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C) #define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030) +/** + * Tx Scheduler + * + * The Tx Scheduler selects the next frame to be transmitted, chosing TFDs + * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in + * host DRAM. It steers each frame's Tx command (which contains the frame + * data) into one of up to 7 prioritized Tx DMA FIFO channels within the + * device. A queue maps to only one (selectable by driver) Tx DMA channel, + * but one DMA channel may take input from several queues. + * + * Tx DMA channels have dedicated purposes. For 4965, they are used as follows: + * + * 0 -- EDCA BK (background) frames, lowest priority + * 1 -- EDCA BE (best effort) frames, normal priority + * 2 -- EDCA VI (video) frames, higher priority + * 3 -- EDCA VO (voice) and management frames, highest priority + * 4 -- Commands (e.g. RXON, etc.) + * 5 -- HCCA short frames + * 6 -- HCCA long frames + * 7 -- not used by driver (device-internal only) + * + * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. + * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to + * support 11n aggregation via EDCA DMA channels. + * + * The driver sets up each queue to work in one of two modes: + * + * 1) Scheduler-Ack, in which the scheduler automatically supports a + * block-ack (BA) window of up to 64 TFDs. In this mode, each queue + * contains TFDs for a unique combination of Recipient Address (RA) + * and Traffic Identifier (TID), that is, traffic of a given + * Quality-Of-Service (QOS) priority, destined for a single station. + * + * In scheduler-ack mode, the scheduler keeps track of the Tx status of + * each frame within the BA window, including whether it's been transmitted, + * and whether it's been acknowledged by the receiving station. The device + * automatically processes block-acks received from the receiving STA, + * and reschedules un-acked frames to be retransmitted (successful + * Tx completion may end up being out-of-order). + * + * The driver must maintain the queue's Byte Count table in host DRAM + * (struct iwl4965_sched_queue_byte_cnt_tbl) for this mode. + * This mode does not support fragmentation. + * + * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. + * The device may automatically retry Tx, but will retry only one frame + * at a time, until receiving ACK from receiving station, or reaching + * retry limit and giving up. + * + * The command queue (#4) must use this mode! + * This mode does not require use of the Byte Count table in host DRAM. + * + * Driver controls scheduler operation via 3 means: + * 1) Scheduler registers + * 2) Shared scheduler data base in internal 4956 SRAM + * 3) Shared data in host DRAM + * + * Initialization: + * + * When loading, driver should allocate memory for: + * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. + * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory + * (1024 bytes for each queue). + * + * After receiving "Alive" response from uCode, driver must initialize + * the scheduler (especially for queue #4, the command queue, otherwise + * the driver can't issue commands!): + */ + +/** + * Max Tx window size is the max number of contiguous TFDs that the scheduler + * can keep track of at one time when creating block-ack chains of frames. + * Note that "64" matches the number of ack bits in a block-ack packet. + * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize + * IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. + */ +#define SCD_WIN_SIZE 64 +#define SCD_FRAME_LIMIT 64 + +/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ +#define IWL49_SCD_START_OFFSET 0xa02c00 + +/* + * 4965 tells driver SRAM address for internal scheduler structs via this reg. + * Value is valid only after "Alive" response from uCode. + */ +#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x0) + +/* + * Driver may need to update queue-empty bits after changing queue's + * write and read pointers (indexes) during (re-)initialization (i.e. when + * scheduler is not tracking what's happening). + * Bit fields: + * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit + * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty + * NOTE: This register is not used by Linux driver. + */ +#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_START_OFFSET + 0x4) + +/* + * Physical base address of array of byte count (BC) circular buffers (CBs). + * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. + * This register points to BC CB for queue 0, must be on 1024-byte boundary. + * Others are spaced by 1024 bytes. + * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. + * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). + * Bit fields: + * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. + */ +#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x10) + +/* + * Enables any/all Tx DMA/FIFO channels. + * Scheduler generates requests for only the active channels. + * Set this to 0xff to enable all 8 channels (normal usage). + * Bit fields: + * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 + */ +#define IWL49_SCD_TXFACT (IWL49_SCD_START_OFFSET + 0x1c) + +/* Mask to enable contiguous Tx DMA/FIFO channels between "lo" and "hi". */ +#define SCD_TXFACT_REG_TXFIFO_MASK(lo, hi) \ + ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) + +/* + * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. + * Initialized and updated by driver as new TFDs are added to queue. + * NOTE: If using Block Ack, index must correspond to frame's + * Start Sequence Number; index = (SSN & 0xff) + * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? + */ +#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_START_OFFSET + 0x24 + (x) * 4) + +/* + * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. + * For FIFO mode, index indicates next frame to transmit. + * For Scheduler-ACK mode, index indicates first frame in Tx window. + * Initialized by driver, updated by scheduler. + */ +#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_START_OFFSET + 0x64 + (x) * 4) + +/* + * Select which queues work in chain mode (1) vs. not (0). + * Use chain mode to build chains of aggregated frames. + * Bit fields: + * 31-16: Reserved + * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time + * NOTE: If driver sets up queue for chain mode, it should be also set up + * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). + */ +#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_START_OFFSET + 0xd0) + +/* + * Select which queues interrupt driver when scheduler increments + * a queue's read pointer (index). + * Bit fields: + * 31-16: Reserved + * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled + * NOTE: This functionality is apparently a no-op; driver relies on interrupts + * from Rx queue to read Tx command responses and update Tx queues. + */ +#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_START_OFFSET + 0xe4) + +/* + * Queue search status registers. One for each queue. + * Sets up queue mode and assigns queue to Tx DMA channel. + * Bit fields: + * 19-10: Write mask/enable bits for bits 0-9 + * 9: Driver should init to "0" + * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). + * Driver should init to "1" for aggregation mode, or "0" otherwise. + * 7-6: Driver should init to "0" + * 5: Window Size Left; indicates whether scheduler can request + * another TFD, based on window size, etc. Driver should init + * this bit to "1" for aggregation mode, or "0" for non-agg. + * 4-1: Tx FIFO to use (range 0-7). + * 0: Queue is active (1), not active (0). + * Other bits should be written as "0" + * + * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled + * via SCD_QUEUECHAIN_SEL. + */ +#define IWL49_SCD_QUEUE_STATUS_BITS(x)\ + (IWL49_SCD_START_OFFSET + 0x104 + (x) * 4) + +/* Bit field positions */ +#define IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) +#define IWL49_SCD_QUEUE_STTS_REG_POS_TXF (1) +#define IWL49_SCD_QUEUE_STTS_REG_POS_WSL (5) +#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) + +/* Write masks */ +#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) +#define IWL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) + +/** + * 4965 internal SRAM structures for scheduler, shared with driver ... + * + * Driver should clear and initialize the following areas after receiving + * "Alive" response from 4965 uCode, i.e. after initial + * uCode load, or after a uCode load done for error recovery: + * + * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) + * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) + * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) + * + * Driver accesses SRAM via HBUS_TARG_MEM_* registers. + * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. + * All OFFSET values must be added to this base address. + */ + +/* + * Queue context. One 8-byte entry for each of 16 queues. + * + * Driver should clear this entire area (size 0x80) to 0 after receiving + * "Alive" notification from uCode. Additionally, driver should init + * each queue's entry as follows: + * + * LS Dword bit fields: + * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. + * + * MS Dword bit fields: + * 16-22: Frame limit. Driver should init to 10 (0xa). + * + * Driver should init all other bits to 0. + * + * Init must be done after driver receives "Alive" response from 4965 uCode, + * and when setting up queue for aggregation. + */ +#define IWL49_SCD_CONTEXT_DATA_OFFSET 0x380 +#define IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ + (IWL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) + +#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) +#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) +#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) +#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) + /* - * 4965 Tx Scheduler registers. - * Details are documented in iwl-4965-hw.h + * Tx Status Bitmap + * + * Driver should clear this entire area (size 0x100) to 0 after receiving + * "Alive" notification from uCode. Area is used only by device itself; + * no other support (besides clearing) is required from driver. */ -#define IWL49_SCD_BASE (PRPH_BASE + 0xa02c00) - -#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_BASE + 0x0) -#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_BASE + 0x4) -#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_BASE + 0x10) -#define IWL49_SCD_AIT (IWL49_SCD_BASE + 0x18) -#define IWL49_SCD_TXFACT (IWL49_SCD_BASE + 0x1c) -#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_BASE + 0x24 + (x) * 4) -#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_BASE + 0x64 + (x) * 4) -#define IWL49_SCD_SETQUEUENUM (IWL49_SCD_BASE + 0xa4) -#define IWL49_SCD_SET_TXSTAT_TXED (IWL49_SCD_BASE + 0xa8) -#define IWL49_SCD_SET_TXSTAT_DONE (IWL49_SCD_BASE + 0xac) -#define IWL49_SCD_SET_TXSTAT_NOT_SCHD (IWL49_SCD_BASE + 0xb0) -#define IWL49_SCD_DECREASE_CREDIT (IWL49_SCD_BASE + 0xb4) -#define IWL49_SCD_DECREASE_SCREDIT (IWL49_SCD_BASE + 0xb8) -#define IWL49_SCD_LOAD_CREDIT (IWL49_SCD_BASE + 0xbc) -#define IWL49_SCD_LOAD_SCREDIT (IWL49_SCD_BASE + 0xc0) -#define IWL49_SCD_BAR (IWL49_SCD_BASE + 0xc4) -#define IWL49_SCD_BAR_DW0 (IWL49_SCD_BASE + 0xc8) -#define IWL49_SCD_BAR_DW1 (IWL49_SCD_BASE + 0xcc) -#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_BASE + 0xd0) -#define IWL49_SCD_QUERY_REQ (IWL49_SCD_BASE + 0xd8) -#define IWL49_SCD_QUERY_RES (IWL49_SCD_BASE + 0xdc) -#define IWL49_SCD_PENDING_FRAMES (IWL49_SCD_BASE + 0xe0) -#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_BASE + 0xe4) -#define IWL49_SCD_INTERRUPT_THRESHOLD (IWL49_SCD_BASE + 0xe8) -#define IWL49_SCD_QUERY_MIN_FRAME_SIZE (IWL49_SCD_BASE + 0x100) -#define IWL49_SCD_QUEUE_STATUS_BITS(x) (IWL49_SCD_BASE + 0x104 + (x) * 4) - -/* SP SCD */ +#define IWL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 + +/* + * RAxTID to queue translation mapping. + * + * When queue is in Scheduler-ACK mode, frames placed in a that queue must be + * for only one combination of receiver address (RA) and traffic ID (TID), i.e. + * one QOS priority level destined for one station (for this wireless link, + * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit + * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK + * mode, the device ignores the mapping value. + * + * Bit fields, for each 16-bit map: + * 15-9: Reserved, set to 0 + * 8-4: Index into device's station table for recipient station + * 3-0: Traffic ID (tid), range 0-15 + * + * Driver should clear this entire area (size 32 bytes) to 0 after receiving + * "Alive" notification from uCode. To update a 16-bit map value, driver + * must read a dword-aligned value from device SRAM, replace the 16-bit map + * value of interest, and write the dword value back into device SRAM. + */ +#define IWL49_SCD_TRANSLATE_TBL_OFFSET 0x500 + +/* Find translation table dword to read/write for given queue */ +#define IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ + ((IWL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) + +#define IWL49_SCD_TXFIFO_POS_TID (0) +#define IWL49_SCD_TXFIFO_POS_RA (4) +#define IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) + +/* 5000 SCD */ #define IWL50_SCD_BASE (PRPH_BASE + 0xa02c00) #define IWL50_SCD_SRAM_BASE_ADDR (IWL50_SCD_BASE + 0x0) @@ -287,4 +531,6 @@ #define IWL50_SCD_INTERRUPT_MASK (IWL50_SCD_BASE + 0x108) #define IWL50_SCD_QUEUE_STATUS_BITS(x) (IWL50_SCD_BASE + 0x10c + (x) * 4) +/*********************** END TX SCHEDULER *************************************/ + #endif /* __iwl_prph_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c index 5980a5621cb..59c8a716bd9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c +++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c @@ -33,7 +33,7 @@ #include <net/mac80211.h> #include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-helpers.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index e4fdfaa2b9b..31b37a1a643 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -28,15 +28,48 @@ *****************************************************************************/ #include <net/mac80211.h> +#include <linux/etherdevice.h> #include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-sta.h" #include "iwl-io.h" #include "iwl-helpers.h" -#include "iwl-4965.h" -#include "iwl-sta.h" + +u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr) +{ + int i; + int start = 0; + int ret = IWL_INVALID_STATION; + unsigned long flags; + DECLARE_MAC_BUF(mac); + + if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) || + (priv->iw_mode == IEEE80211_IF_TYPE_AP)) + start = IWL_STA_ID; + + if (is_broadcast_ether_addr(addr)) + return priv->hw_params.bcast_sta_id; + + spin_lock_irqsave(&priv->sta_lock, flags); + for (i = start; i < priv->hw_params.max_stations; i++) + if (priv->stations[i].used && + (!compare_ether_addr(priv->stations[i].sta.sta.addr, + addr))) { + ret = i; + goto out; + } + + IWL_DEBUG_ASSOC_LIMIT("can not find STA %s total %d\n", + print_mac(mac, addr), priv->num_stations); + + out: + spin_unlock_irqrestore(&priv->sta_lock, flags); + return ret; +} +EXPORT_SYMBOL(iwl_find_station); + int iwl_get_free_ucode_key_index(struct iwl_priv *priv) { @@ -172,10 +205,14 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, memcpy(&priv->stations[sta_id].sta.key.key[3], keyconf->key, keyconf->keylen); - priv->stations[sta_id].sta.key.key_offset = + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = iwl_get_free_ucode_key_index(priv); - priv->stations[sta_id].sta.key.key_flags = key_flags; + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -214,8 +251,13 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); - priv->stations[sta_id].sta.key.key_offset = - iwl_get_free_ucode_key_index(priv); + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = + iwl_get_free_ucode_key_index(priv); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -243,8 +285,13 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, priv->stations[sta_id].keyinfo.alg = keyconf->alg; priv->stations[sta_id].keyinfo.conf = keyconf; priv->stations[sta_id].keyinfo.keylen = 16; - priv->stations[sta_id].sta.key.key_offset = + + if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + == STA_KEY_FLG_NO_ENC) + priv->stations[sta_id].sta.key.key_offset = iwl_get_free_ucode_key_index(priv); + /* else, we are overriding an existing key => no need to allocated room + * in uCode. */ /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -256,13 +303,31 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, return ret; } -int iwl_remove_dynamic_key(struct iwl_priv *priv, u8 sta_id) +int iwl_remove_dynamic_key(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + u8 sta_id) { unsigned long flags; + int ret = 0; + u16 key_flags; + u8 keyidx; priv->key_mapping_key = 0; spin_lock_irqsave(&priv->sta_lock, flags); + key_flags = le16_to_cpu(priv->stations[sta_id].sta.key.key_flags); + keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; + + if (keyconf->keyidx != keyidx) { + /* We need to remove a key with index different that the one + * in the uCode. This means that the key we need to remove has + * been replaced by another one with different index. + * Don't do anything and return ok + */ + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", @@ -271,13 +336,16 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, u8 sta_id) sizeof(struct iwl4965_hw_key)); memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl4965_keyinfo)); - priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; + priv->stations[sta_id].sta.key.key_flags = + STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; + priv->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n"); - return iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, 0); + ret = iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, 0); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return ret; } int iwl_set_dynamic_key(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index 44f272ecc82..38b1b0a9884 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -29,21 +29,14 @@ #ifndef __iwl_sta_h__ #define __iwl_sta_h__ -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-core.h" -#include "iwl-4965.h" -#include "iwl-io.h" -#include "iwl-helpers.h" - int iwl_get_free_ucode_key_index(struct iwl_priv *priv); int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty); int iwl_remove_default_wep_key(struct iwl_priv *priv, struct ieee80211_key_conf *key); int iwl_set_default_wep_key(struct iwl_priv *priv, struct ieee80211_key_conf *key); -int iwl_remove_dynamic_key(struct iwl_priv *priv, u8 sta_id); int iwl_set_dynamic_key(struct iwl_priv *priv, struct ieee80211_key_conf *key, u8 sta_id); +int iwl_remove_dynamic_key(struct iwl_priv *priv, + struct ieee80211_key_conf *key, u8 sta_id); #endif /* __iwl_sta_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 13925b627e3..7040cde8bc2 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2391,7 +2391,8 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, struct sk_buff *skb_frag, int last_frag) { - struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; + struct iwl3945_hw_key *keyinfo = + &priv->stations[ctl->hw_key->hw_key_idx].keyinfo; switch (keyinfo->alg) { case ALG_CCMP: @@ -2414,7 +2415,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, case ALG_WEP: cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP | - (ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT; + (ctl->hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT; if (keyinfo->keylen == 13) cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128; @@ -2422,7 +2423,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen); IWL_DEBUG_TX("Configuring packet for WEP encryption " - "with key %d\n", ctl->key_idx); + "with key %d\n", ctl->hw_key->hw_key_idx); break; default: @@ -4840,7 +4841,7 @@ static int iwl3945_init_channel_map(struct iwl3945_priv *priv) ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; ch_info->min_power = 0; - IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x" + IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x" " %ddBm): Ad-Hoc %ssupported\n", ch_info->channel, is_channel_a_band(ch_info) ? @@ -4850,7 +4851,6 @@ static int iwl3945_init_channel_map(struct iwl3945_priv *priv) CHECK_AND_PRINT(ACTIVE), CHECK_AND_PRINT(RADAR), CHECK_AND_PRINT(WIDE), - CHECK_AND_PRINT(NARROW), CHECK_AND_PRINT(DFS), eeprom_ch_info[ch].flags, eeprom_ch_info[ch].max_power_avg, @@ -4986,9 +4986,6 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, if (scan_ch->type & 1) scan_ch->type |= (direct_mask << 1); - if (is_channel_narrow(ch_info)) - scan_ch->type |= (1 << 7); - scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); @@ -7146,7 +7143,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, return rc; } -static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, int queue, +static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params) { struct iwl3945_priv *priv = hw->priv; @@ -7220,9 +7217,9 @@ static int iwl3945_mac_get_tx_stats(struct ieee80211_hw *hw, q = &txq->q; avail = iwl3945_queue_space(q); - stats->data[i].len = q->n_window - avail; - stats->data[i].limit = q->n_window - q->high_mark; - stats->data[i].count = q->n_window; + stats[i].len = q->n_window - avail; + stats[i].limit = q->n_window - q->high_mark; + stats[i].count = q->n_window; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 883b42f7e99..4406fc72d88 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -46,11 +46,12 @@ #include <asm/div64.h> #include "iwl-eeprom.h" -#include "iwl-4965.h" +#include "iwl-dev.h" #include "iwl-core.h" #include "iwl-io.h" #include "iwl-helpers.h" #include "iwl-sta.h" +#include "iwl-calib.h" static int iwl4965_tx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl4965_tx_queue *txq); @@ -98,7 +99,7 @@ __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr) return NULL; } -static const struct ieee80211_supported_band *iwl4965_get_hw_mode( +static const struct ieee80211_supported_band *iwl_get_hw_mode( struct iwl_priv *priv, enum ieee80211_band band) { return priv->hw->wiphy->bands[band]; @@ -795,14 +796,6 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) /* station table will be cleared */ priv->assoc_station_added = 0; -#ifdef CONFIG_IWL4965_SENSITIVITY - priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; - if (!priv->error_recovering) - priv->start_calib = 0; - - iwl4965_init_sensitivity(priv, CMD_ASYNC, 1); -#endif /* CONFIG_IWL4965_SENSITIVITY */ - /* If we are currently associated and the new config requires * an RXON_ASSOC and the new config wants the associated mask enabled, * we must clear the associated from the active configuration @@ -835,7 +828,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) le16_to_cpu(priv->staging_rxon.channel), print_mac(mac, priv->staging_rxon.bssid_addr)); - iwl4965_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto); + iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto); /* Apply the new configuration */ rc = iwl_send_cmd_pdu(priv, REPLY_RXON, sizeof(struct iwl4965_rxon_cmd), &priv->staging_rxon); @@ -846,13 +839,10 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) iwlcore_clear_stations_table(priv); -#ifdef CONFIG_IWL4965_SENSITIVITY if (!priv->error_recovering) priv->start_calib = 0; - priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT; - iwl4965_init_sensitivity(priv, CMD_ASYNC, 1); -#endif /* CONFIG_IWL4965_SENSITIVITY */ + iwl_init_sensitivity(priv); memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon)); @@ -889,6 +879,13 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) return 0; } +void iwl4965_update_chain_flags(struct iwl_priv *priv) +{ + + iwl_set_rxon_chain(priv); + iwl4965_commit_rxon(priv); +} + static int iwl4965_send_bt_config(struct iwl_priv *priv) { struct iwl4965_bt_cmd bt_cmd = { @@ -944,13 +941,6 @@ static int iwl4965_send_scan_abort(struct iwl_priv *priv) return rc; } -static int iwl4965_card_state_sync_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, - struct sk_buff *skb) -{ - return 1; -} - /* * CARD_STATE_CMD * @@ -970,40 +960,9 @@ static int iwl4965_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_fla .meta.flags = meta_flag, }; - if (meta_flag & CMD_ASYNC) - cmd.meta.u.callback = iwl4965_card_state_sync_callback; - return iwl_send_cmd(priv, &cmd); } -static int iwl4965_add_sta_sync_callback(struct iwl_priv *priv, - struct iwl_cmd *cmd, struct sk_buff *skb) -{ - struct iwl4965_rx_packet *res = NULL; - - if (!skb) { - IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n"); - return 1; - } - - res = (struct iwl4965_rx_packet *)skb->data; - if (res->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n", - res->hdr.flags); - return 1; - } - - switch (res->u.add_sta.status) { - case ADD_STA_SUCCESS_MSK: - break; - default: - break; - } - - /* We didn't cache the SKB; let the caller free it */ - return 1; -} - int iwl4965_send_add_station(struct iwl_priv *priv, struct iwl4965_addsta_cmd *sta, u8 flags) { @@ -1016,9 +975,7 @@ int iwl4965_send_add_station(struct iwl_priv *priv, .data = sta, }; - if (flags & CMD_ASYNC) - cmd.meta.u.callback = iwl4965_add_sta_sync_callback; - else + if (!(flags & CMD_ASYNC)) cmd.meta.flags |= CMD_WANT_SKB; rc = iwl_send_cmd(priv, &cmd); @@ -1116,17 +1073,29 @@ unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, return priv->ibss_beacon->len; } -static u8 iwl4965_rate_get_lowest_plcp(int rate_mask) +static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) { - u8 i; + int i; + int rate_mask; + + /* Set rate mask*/ + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) + rate_mask = priv->active_rate_basic & 0xF; + else + rate_mask = priv->active_rate_basic & 0xFF0; + /* Find lowest valid rate */ for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; - i = iwl4965_rates[i].next_ieee) { + i = iwl4965_rates[i].next_ieee) { if (rate_mask & (1 << i)) return iwl4965_rates[i].plcp; } - return IWL_RATE_INVALID; + /* No valid rate was found. Assign the lowest one */ + if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) + return IWL_RATE_1M_PLCP; + else + return IWL_RATE_6M_PLCP; } static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) @@ -1144,16 +1113,7 @@ static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) return -ENOMEM; } - if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) { - rate = iwl4965_rate_get_lowest_plcp(priv->active_rate_basic & - 0xFF0); - if (rate == IWL_INVALID_RATE) - rate = IWL_RATE_6M_PLCP; - } else { - rate = iwl4965_rate_get_lowest_plcp(priv->active_rate_basic & 0xF); - if (rate == IWL_INVALID_RATE) - rate = IWL_RATE_1M_PLCP; - } + rate = iwl4965_rate_get_lowest_plcp(priv); frame_size = iwl4965_hw_get_beacon_cmd(priv, frame, rate); @@ -1171,15 +1131,6 @@ static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) * ******************************************************************************/ -static void iwl4965_unset_hw_params(struct iwl_priv *priv) -{ - if (priv->shared_virt) - pci_free_consistent(priv->pci_dev, - sizeof(struct iwl4965_shared), - priv->shared_virt, - priv->shared_phys); -} - /** * iwl4965_supported_rate_to_ie - fill in the supported rate in IE field * @@ -1209,6 +1160,91 @@ static u16 iwl4965_supported_rate_to_ie(u8 *ie, u16 supported_rate, return ret_rates; } +#ifdef CONFIG_IWL4965_HT +static void iwl4965_ht_conf(struct iwl_priv *priv, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf; + struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; + struct iwl_ht_info *iwl_conf = &priv->current_ht_config; + + IWL_DEBUG_MAC80211("enter: \n"); + + iwl_conf->is_ht = bss_conf->assoc_ht; + + if (!iwl_conf->is_ht) + return; + + priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); + + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) + iwl_conf->sgf |= 0x1; + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) + iwl_conf->sgf |= 0x2; + + iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD); + iwl_conf->max_amsdu_size = + !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU); + + iwl_conf->supported_chan_width = + !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH); + iwl_conf->extension_chan_offset = + ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET; + /* If no above or below channel supplied disable FAT channel */ + if (iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_ABOVE && + iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_BELOW) + iwl_conf->supported_chan_width = 0; + + iwl_conf->tx_mimo_ps_mode = + (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); + memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); + + iwl_conf->control_channel = ht_bss_conf->primary_channel; + iwl_conf->tx_chan_width = + !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH); + iwl_conf->ht_protection = + ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION; + iwl_conf->non_GF_STA_present = + !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT); + + IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); + IWL_DEBUG_MAC80211("leave\n"); +} + +static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, + u8 *pos, int *left) +{ + struct ieee80211_ht_cap *ht_cap; + + if (!sband || !sband->ht_info.ht_supported) + return; + + if (*left < sizeof(struct ieee80211_ht_cap)) + return; + + *pos++ = sizeof(struct ieee80211_ht_cap); + ht_cap = (struct ieee80211_ht_cap *) pos; + + ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap); + memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16); + ht_cap->ampdu_params_info = + (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) | + ((sband->ht_info.ampdu_density << 2) & + IEEE80211_HT_CAP_AMPDU_DENSITY); + *left -= sizeof(struct ieee80211_ht_cap); +} +#else +static inline void iwl4965_ht_conf(struct iwl_priv *priv, + struct ieee80211_bss_conf *bss_conf) +{ +} +static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, + u8 *pos, int *left) +{ +} +#endif + + /** * iwl4965_fill_probe_req - fill in all required fields and IE for probe request */ @@ -1220,10 +1256,8 @@ static u16 iwl4965_fill_probe_req(struct iwl_priv *priv, int len = 0; u8 *pos = NULL; u16 active_rates, ret_rates, cck_rates, active_rate_basic; -#ifdef CONFIG_IWL4965_HT const struct ieee80211_supported_band *sband = - iwl4965_get_hw_mode(priv, band); -#endif /* CONFIG_IWL4965_HT */ + iwl_get_hw_mode(priv, band); /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ @@ -1306,24 +1340,19 @@ static u16 iwl4965_fill_probe_req(struct iwl_priv *priv, if (*pos > 0) len += 2 + *pos; -#ifdef CONFIG_IWL4965_HT - if (sband && sband->ht_info.ht_supported) { - struct ieee80211_ht_cap *ht_cap; - pos += (*pos) + 1; - *pos++ = WLAN_EID_HT_CAPABILITY; - *pos++ = sizeof(struct ieee80211_ht_cap); - ht_cap = (struct ieee80211_ht_cap *)pos; - ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap); - memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16); - ht_cap->ampdu_params_info =(sband->ht_info.ampdu_factor & - IEEE80211_HT_CAP_AMPDU_FACTOR) | - ((sband->ht_info.ampdu_density << 2) & - IEEE80211_HT_CAP_AMPDU_DENSITY); - len += 2 + sizeof(struct ieee80211_ht_cap); - } -#endif /*CONFIG_IWL4965_HT */ - fill_end: + /* fill in HT IE */ + left -= 2; + if (left < 0) + return 0; + + *pos++ = WLAN_EID_HT_CAPABILITY; + *pos = 0; + + iwl_ht_cap_to_ie(sband, pos, &left); + + if (*pos > 0) + len += 2 + *pos; return (u16)len; } @@ -1376,184 +1405,6 @@ static void iwl4965_activate_qos(struct iwl_priv *priv, u8 force) } } -/* - * Power management (not Tx power!) functions - */ -#define MSEC_TO_USEC 1024 - -#define NOSLP __constant_cpu_to_le16(0), 0, 0 -#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 -#define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC) -#define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \ - __constant_cpu_to_le32(X1), \ - __constant_cpu_to_le32(X2), \ - __constant_cpu_to_le32(X3), \ - __constant_cpu_to_le32(X4)} - - -/* default power management (not Tx power) table values */ -/* for tim 0-10 */ -static struct iwl4965_power_vec_entry range_0[IWL_POWER_AC] = { - {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1}, - {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1} -}; - -/* for tim > 10 */ -static struct iwl4965_power_vec_entry range_1[IWL_POWER_AC] = { - {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), - SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), - SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), - SLP_VEC(2, 6, 9, 9, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, - {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), - SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} -}; - -int iwl4965_power_init_handle(struct iwl_priv *priv) -{ - int rc = 0, i; - struct iwl4965_power_mgr *pow_data; - int size = sizeof(struct iwl4965_power_vec_entry) * IWL_POWER_AC; - u16 pci_pm; - - IWL_DEBUG_POWER("Initialize power \n"); - - pow_data = &(priv->power_data); - - memset(pow_data, 0, sizeof(*pow_data)); - - pow_data->active_index = IWL_POWER_RANGE_0; - pow_data->dtim_val = 0xffff; - - memcpy(&pow_data->pwr_range_0[0], &range_0[0], size); - memcpy(&pow_data->pwr_range_1[0], &range_1[0], size); - - rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm); - if (rc != 0) - return 0; - else { - struct iwl4965_powertable_cmd *cmd; - - IWL_DEBUG_POWER("adjust power command flags\n"); - - for (i = 0; i < IWL_POWER_AC; i++) { - cmd = &pow_data->pwr_range_0[i].cmd; - - if (pci_pm & 0x1) - cmd->flags &= ~IWL_POWER_PCI_PM_MSK; - else - cmd->flags |= IWL_POWER_PCI_PM_MSK; - } - } - return rc; -} - -static int iwl4965_update_power_cmd(struct iwl_priv *priv, - struct iwl4965_powertable_cmd *cmd, u32 mode) -{ - int rc = 0, i; - u8 skip; - u32 max_sleep = 0; - struct iwl4965_power_vec_entry *range; - u8 period = 0; - struct iwl4965_power_mgr *pow_data; - - if (mode > IWL_POWER_INDEX_5) { - IWL_DEBUG_POWER("Error invalid power mode \n"); - return -1; - } - pow_data = &(priv->power_data); - - if (pow_data->active_index == IWL_POWER_RANGE_0) - range = &pow_data->pwr_range_0[0]; - else - range = &pow_data->pwr_range_1[1]; - - memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd)); - -#ifdef IWL_MAC80211_DISABLE - if (priv->assoc_network != NULL) { - unsigned long flags; - - period = priv->assoc_network->tim.tim_period; - } -#endif /*IWL_MAC80211_DISABLE */ - skip = range[mode].no_dtim; - - if (period == 0) { - period = 1; - skip = 0; - } - - if (skip == 0) { - max_sleep = period; - cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; - } else { - __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]; - max_sleep = (le32_to_cpu(slp_itrvl) / period) * period; - cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; - } - - for (i = 0; i < IWL_POWER_VEC_SIZE; i++) { - if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep) - cmd->sleep_interval[i] = cpu_to_le32(max_sleep); - } - - IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags); - IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); - IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); - IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n", - le32_to_cpu(cmd->sleep_interval[0]), - le32_to_cpu(cmd->sleep_interval[1]), - le32_to_cpu(cmd->sleep_interval[2]), - le32_to_cpu(cmd->sleep_interval[3]), - le32_to_cpu(cmd->sleep_interval[4])); - - return rc; -} - -static int iwl4965_send_power_mode(struct iwl_priv *priv, u32 mode) -{ - u32 uninitialized_var(final_mode); - int rc; - struct iwl4965_powertable_cmd cmd; - - /* If on battery, set to 3, - * if plugged into AC power, set to CAM ("continuously aware mode"), - * else user level */ - switch (mode) { - case IWL_POWER_BATTERY: - final_mode = IWL_POWER_INDEX_3; - break; - case IWL_POWER_AC: - final_mode = IWL_POWER_MODE_CAM; - break; - default: - final_mode = mode; - break; - } - - cmd.keep_alive_beacons = 0; - - iwl4965_update_power_cmd(priv, &cmd, final_mode); - - rc = iwl_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd); - - if (final_mode == IWL_POWER_MODE_CAM) - clear_bit(STATUS_POWER_PMI, &priv->status); - else - set_bit(STATUS_POWER_PMI, &priv->status); - - return rc; -} - int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) { /* Filter incoming packets to determine if they are targeted toward @@ -1884,7 +1735,7 @@ static void iwl4965_connection_init_rx_config(struct iwl_priv *priv) memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; - iwl4965_set_rxon_chain(priv); + iwl_set_rxon_chain(priv); } static int iwl4965_set_mode(struct iwl_priv *priv, int mode) @@ -1936,7 +1787,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv, struct iwl_wep_key *wepkey; int keyidx = 0; - BUG_ON(ctl->key_idx > 3); + BUG_ON(ctl->hw_key->hw_key_idx > 3); switch (keyinfo->alg) { case ALG_CCMP: @@ -1955,11 +1806,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv, break; case ALG_WEP: - wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl = 0; if (priv->default_wep_key) { /* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx; memcpy(&cmd->cmd.tx.key[3], wepkey->key, wepkey->key_size); if (wepkey->key_size == WEP_KEY_LEN_128) @@ -2086,7 +1937,7 @@ static int iwl4965_get_sta_id(struct iwl_priv *priv, /* If we are an AP, then find the station, or use BCAST */ case IEEE80211_IF_TYPE_AP: - sta_id = iwl4965_hw_find_station(priv, hdr->addr1); + sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; return priv->hw_params.bcast_sta_id; @@ -2094,7 +1945,7 @@ static int iwl4965_get_sta_id(struct iwl_priv *priv, /* If this frame is going out to an IBSS network, find the station, * or create a new station table entry */ case IEEE80211_IF_TYPE_IBSS: - sta_id = iwl4965_hw_find_station(priv, hdr->addr1); + sta_id = iwl_find_station(priv, hdr->addr1); if (sta_id != IWL_INVALID_STATION) return sta_id; @@ -2196,7 +2047,7 @@ static int iwl4965_tx_skb(struct iwl_priv *priv, goto drop; } - IWL_DEBUG_RATE("station Id %d\n", sta_id); + IWL_DEBUG_TX("station Id %d\n", sta_id); qc = ieee80211_get_qos_ctrl(hdr); if (qc) { @@ -2367,7 +2218,7 @@ static void iwl4965_set_rate(struct iwl_priv *priv) struct ieee80211_rate *rate; int i; - hw = iwl4965_get_hw_mode(priv, priv->band); + hw = iwl_get_hw_mode(priv, priv->band); if (!hw) { IWL_ERROR("Failed to set rate: unable to get hw mode\n"); return; @@ -2466,45 +2317,6 @@ void iwl4965_radio_kill_sw(struct iwl_priv *priv, int disable_radio) return; } -void iwl4965_set_decrypted_flag(struct iwl_priv *priv, struct sk_buff *skb, - u32 decrypt_res, struct ieee80211_rx_status *stats) -{ - u16 fc = - le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control); - - if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) - return; - - if (!(fc & IEEE80211_FCTL_PROTECTED)) - return; - - IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); - switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { - case RX_RES_STATUS_SEC_TYPE_TKIP: - /* The uCode has got a bad phase 1 Key, pushes the packet. - * Decryption will be done in SW. */ - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_BAD_KEY_TTAK) - break; - - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_BAD_ICV_MIC) - stats->flag |= RX_FLAG_MMIC_ERROR; - case RX_RES_STATUS_SEC_TYPE_WEP: - case RX_RES_STATUS_SEC_TYPE_CCMP: - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_DECRYPT_OK) { - IWL_DEBUG_RX("hw decrypt successfully!!!\n"); - stats->flag |= RX_FLAG_DECRYPTED; - } - break; - - default: - break; - } -} - - #define IWL_PACKET_RETRY_TIME HZ int iwl4965_is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) @@ -2710,8 +2522,6 @@ static void iwl4965_txstatus_to_ieee(struct iwl_priv *priv, tx_sta->status.ack_signal = 0; tx_sta->status.excessive_retries = 0; - tx_sta->status.queue_length = 0; - tx_sta->status.queue_number = 0; if (in_interrupt()) ieee80211_tx_status_irqsafe(priv->hw, @@ -2788,7 +2598,7 @@ static inline int iwl4965_get_ra_sta_id(struct iwl_priv *priv, return IWL_AP_ID; else { u8 *da = ieee80211_get_DA(hdr); - return iwl4965_hw_find_station(priv, da); + return iwl_find_station(priv, da); } } @@ -2847,8 +2657,6 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, tx_status = &(priv->txq[txq_id].txb[idx].status); tx_status->retry_count = tx_resp->failure_frame; - tx_status->queue_number = status & 0xff; - tx_status->queue_length = tx_resp->failure_rts; tx_status->control.flags &= ~IEEE80211_TXCTL_AMPDU; tx_status->flags = iwl4965_is_tx_success(status)? IEEE80211_TX_STATUS_ACK : 0; @@ -3008,9 +2816,6 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, tx_status = &(txq->txb[txq->q.read_ptr].status); tx_status->retry_count = tx_resp->failure_frame; - tx_status->queue_number = status; - tx_status->queue_length = tx_resp->bt_kill_count; - tx_status->queue_length |= tx_resp->failure_rts; tx_status->flags = iwl4965_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0; iwl4965_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), @@ -3425,7 +3230,7 @@ static void iwl4965_setup_rx_handlers(struct iwl_priv *priv) priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; /* Set up hardware specific Rx handlers */ - iwl4965_hw_rx_handler_setup(priv); + priv->cfg->ops->lib->rx_handler_setup(priv); } /** @@ -4620,7 +4425,7 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, u16 active_dwell = 0; int added, i; - sband = iwl4965_get_hw_mode(priv, band); + sband = iwl_get_hw_mode(priv, band); if (!sband) return 0; @@ -4652,9 +4457,6 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, if (scan_ch->type & 1) scan_ch->type |= (direct_mask << 1); - if (is_channel_narrow(ch_info)) - scan_ch->type |= (1 << 7); - scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); @@ -4687,163 +4489,6 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, return added; } -static void iwl4965_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT; i++) { - rates[i].bitrate = iwl4965_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -/** - * iwl4965_init_geos - Initialize mac80211's geo/channel info based from eeprom - */ -int iwl4965_init_geos(struct iwl_priv *priv) -{ - struct iwl_channel_info *ch; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *channels; - struct ieee80211_channel *geo_ch; - struct ieee80211_rate *rates; - int i = 0; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || - priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { - IWL_DEBUG_INFO("Geography modes already initialized.\n"); - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - return 0; - } - - channels = kzalloc(sizeof(struct ieee80211_channel) * - priv->channel_count, GFP_KERNEL); - if (!channels) - return -ENOMEM; - - rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)), - GFP_KERNEL); - if (!rates) { - kfree(channels); - return -ENOMEM; - } - - /* 5.2GHz channels start after the 2.4GHz channels */ - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; - /* just OFDM */ - sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; - sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE; - - iwl4965_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ); - - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - sband->channels = channels; - /* OFDM & CCK */ - sband->bitrates = rates; - sband->n_bitrates = IWL_RATE_COUNT; - - iwl4965_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ); - - priv->ieee_channels = channels; - priv->ieee_rates = rates; - - iwl4965_init_hw_rates(priv, rates); - - for (i = 0; i < priv->channel_count; i++) { - ch = &priv->channel_info[i]; - - /* FIXME: might be removed if scan is OK */ - if (!is_channel_valid(ch)) - continue; - - if (is_channel_a_band(ch)) - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - else - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - - geo_ch = &sband->channels[sband->n_channels++]; - - geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel); - geo_ch->max_power = ch->max_power_avg; - geo_ch->max_antenna_gain = 0xff; - geo_ch->hw_value = ch->channel; - - if (is_channel_valid(ch)) { - if (!(ch->flags & EEPROM_CHANNEL_IBSS)) - geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; - - if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) - geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - if (ch->flags & EEPROM_CHANNEL_RADAR) - geo_ch->flags |= IEEE80211_CHAN_RADAR; - - if (ch->max_power_avg > priv->max_channel_txpower_limit) - priv->max_channel_txpower_limit = - ch->max_power_avg; - } else { - geo_ch->flags |= IEEE80211_CHAN_DISABLED; - } - - /* Save flags for reg domain usage */ - geo_ch->orig_flags = geo_ch->flags; - - IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n", - ch->channel, geo_ch->center_freq, - is_channel_a_band(ch) ? "5.2" : "2.4", - geo_ch->flags & IEEE80211_CHAN_DISABLED ? - "restricted" : "valid", - geo_ch->flags); - } - - if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && - priv->cfg->sku & IWL_SKU_A) { - printk(KERN_INFO DRV_NAME - ": Incorrectly detected BG card as ABG. Please send " - "your PCI ID 0x%04X:0x%04X to maintainer.\n", - priv->pci_dev->device, priv->pci_dev->subsystem_device); - priv->cfg->sku &= ~IWL_SKU_A; - } - - printk(KERN_INFO DRV_NAME - ": Tunable channels: %d 802.11bg, %d 802.11a channels\n", - priv->bands[IEEE80211_BAND_2GHZ].n_channels, - priv->bands[IEEE80211_BAND_5GHZ].n_channels); - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - - return 0; -} - -/* - * iwl4965_free_geos - undo allocations in iwl4965_init_geos - */ -void iwl4965_free_geos(struct iwl_priv *priv) -{ - kfree(priv->ieee_channels); - kfree(priv->ieee_rates); - clear_bit(STATUS_GEO_CONFIGURED, &priv->status); -} - /****************************************************************************** * * uCode download functions @@ -4860,146 +4505,6 @@ static void iwl4965_dealloc_ucode_pci(struct iwl_priv *priv) iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); } -/** - * iwl4965_verify_inst_full - verify runtime uCode image in card vs. host, - * looking at all data. - */ -static int iwl4965_verify_inst_full(struct iwl_priv *priv, __le32 *image, - u32 len) -{ - u32 val; - u32 save_len = len; - int rc = 0; - u32 errcnt; - - IWL_DEBUG_INFO("ucode inst image size is %u\n", len); - - rc = iwl_grab_nic_access(priv); - if (rc) - return rc; - - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND); - - errcnt = 0; - for (; len > 0; len -= sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERROR("uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - save_len - len, val, le32_to_cpu(*image)); - rc = -EIO; - errcnt++; - if (errcnt >= 20) - break; - } - } - - iwl_release_nic_access(priv); - - if (!errcnt) - IWL_DEBUG_INFO - ("ucode image in INSTRUCTION memory is good\n"); - - return rc; -} - - -/** - * iwl4965_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl4965_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - int rc = 0; - u32 errcnt = 0; - u32 i; - - IWL_DEBUG_INFO("ucode inst image size is %u\n", len); - - rc = iwl_grab_nic_access(priv); - if (rc) - return rc; - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - i + RTC_INST_LOWER_BOUND); - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { -#if 0 /* Enable this if you want to see details */ - IWL_ERROR("uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - i, val, *image); -#endif - rc = -EIO; - errcnt++; - if (errcnt >= 3) - break; - } - } - - iwl_release_nic_access(priv); - - return rc; -} - - -/** - * iwl4965_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl4965_verify_ucode(struct iwl_priv *priv) -{ - __le32 *image; - u32 len; - int rc = 0; - - /* Try bootstrap */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl4965_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n"); - return 0; - } - - /* Try initialize */ - image = (__le32 *)priv->ucode_init.v_addr; - len = priv->ucode_init.len; - rc = iwl4965_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n"); - return 0; - } - - /* Try runtime/protocol */ - image = (__le32 *)priv->ucode_code.v_addr; - len = priv->ucode_code.len; - rc = iwl4965_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - - /* Since nothing seems to match, show first several data entries in - * instruction SRAM, so maybe visual inspection will give a clue. - * Selection of bootstrap image (vs. other images) is arbitrary. */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl4965_verify_inst_full(priv, image, len); - - return rc; -} - static void iwl4965_nic_start(struct iwl_priv *priv) { /* Remove all resets to allow NIC to operate */ @@ -5075,34 +4580,34 @@ static int iwl4965_read_ucode(struct iwl_priv *priv) } /* Verify that uCode images will fit in card's SRAM */ - if (inst_size > IWL_MAX_INST_SIZE) { + if (inst_size > priv->hw_params.max_inst_size) { IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n", inst_size); ret = -EINVAL; goto err_release; } - if (data_size > IWL_MAX_DATA_SIZE) { + if (data_size > priv->hw_params.max_data_size) { IWL_DEBUG_INFO("uCode data len %d too large to fit in\n", data_size); ret = -EINVAL; goto err_release; } - if (init_size > IWL_MAX_INST_SIZE) { + if (init_size > priv->hw_params.max_inst_size) { IWL_DEBUG_INFO ("uCode init instr len %d too large to fit in\n", init_size); ret = -EINVAL; goto err_release; } - if (init_data_size > IWL_MAX_DATA_SIZE) { + if (init_data_size > priv->hw_params.max_data_size) { IWL_DEBUG_INFO ("uCode init data len %d too large to fit in\n", init_data_size); ret = -EINVAL; goto err_release; } - if (boot_size > IWL_MAX_BSM_SIZE) { + if (boot_size > priv->hw_params.max_bsm_size) { IWL_DEBUG_INFO ("uCode boot instr len %d too large to fit in\n", boot_size); @@ -5275,7 +4780,7 @@ static void iwl4965_init_alive_start(struct iwl_priv *priv) /* Bootstrap uCode has loaded initialize uCode ... verify inst image. * This is a paranoid check, because we would not have gotten the * "initialize" alive if code weren't properly loaded. */ - if (iwl4965_verify_ucode(priv)) { + if (iwl_verify_ucode(priv)) { /* Runtime instruction load was bad; * take it all the way back down so we can try again */ IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); @@ -5323,7 +4828,7 @@ static void iwl4965_alive_start(struct iwl_priv *priv) /* Initialize uCode has loaded Runtime uCode ... verify inst image. * This is a paranoid check, because we would not have gotten the * "runtime" alive if code weren't properly loaded. */ - if (iwl4965_verify_ucode(priv)) { + if (iwl_verify_ucode(priv)) { /* Runtime instruction load was bad; * take it all the way back down so we can try again */ IWL_DEBUG_INFO("Bad runtime uCode load.\n"); @@ -5353,8 +4858,6 @@ static void iwl4965_alive_start(struct iwl_priv *priv) priv->active_rate = priv->rates_mask; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - iwl4965_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode)); - if (iwl_is_associated(priv)) { struct iwl4965_rxon_cmd *active_rxon = (struct iwl4965_rxon_cmd *)(&priv->active_rxon); @@ -5485,6 +4988,7 @@ static void __iwl4965_down(struct iwl_priv *priv) iwl4965_hw_nic_stop_master(priv); iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); iwl4965_hw_nic_reset(priv); + priv->cfg->ops->lib->free_shared_mem(priv); exit: memset(&priv->card_alive, 0, sizeof(struct iwl4965_alive_resp)); @@ -5546,6 +5050,12 @@ static int __iwl4965_up(struct iwl_priv *priv) iwl_rfkill_set_hw_state(priv); iwl_write32(priv, CSR_INT, 0xFFFFFFFF); + ret = priv->cfg->ops->lib->alloc_shared_mem(priv); + if (ret) { + IWL_ERROR("Unable to allocate shared memory\n"); + return ret; + } + ret = priv->cfg->ops->lib->hw_nic_init(priv); if (ret) { IWL_ERROR("Unable to init nic\n"); @@ -5887,6 +5397,8 @@ static void iwl4965_bg_request_scan(struct work_struct *data) direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | + RXON_FILTER_BCON_AWARE_MSK); cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl4965_scan_channel); cmd.data = scan; @@ -5991,7 +5503,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) if (priv->current_ht_config.is_ht) iwl4965_set_rxon_ht(priv, &priv->current_ht_config); #endif /* CONFIG_IWL4965_HT*/ - iwl4965_set_rxon_chain(priv); + iwl_set_rxon_chain(priv); priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n", @@ -6040,17 +5552,16 @@ static void iwl4965_post_associate(struct iwl_priv *priv) iwl4965_sequence_reset(priv); -#ifdef CONFIG_IWL4965_SENSITIVITY /* Enable Rx differential gain and sensitivity calibrations */ - iwl4965_chain_noise_reset(priv); + iwl_chain_noise_reset(priv); priv->start_calib = 1; -#endif /* CONFIG_IWL4965_SENSITIVITY */ if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) priv->assoc_station_added = 1; iwl4965_activate_qos(priv, 0); + iwl_power_update_mode(priv, 0); /* we have just associated, don't start scan too early */ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN; } @@ -6338,7 +5849,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co priv->staging_rxon.flags = 0; #endif /* CONFIG_IWL4965_HT */ - iwlcore_set_rxon_channel(priv, conf->channel->band, + iwl_set_rxon_channel(priv, conf->channel->band, ieee80211_frequency_to_channel(conf->channel->center_freq)); iwl4965_set_flags_for_phymode(priv, conf->channel->band); @@ -6410,7 +5921,7 @@ static void iwl4965_config_ap(struct iwl_priv *priv) IWL_WARNING("REPLY_RXON_TIMING failed - " "Attempting to continue.\n"); - iwl4965_set_rxon_chain(priv); + iwl_set_rxon_chain(priv); /* FIXME: what should be the assoc_id for AP? */ priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id); @@ -6592,64 +6103,6 @@ static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw, } - -#ifdef CONFIG_IWL4965_HT -static void iwl4965_ht_conf(struct iwl_priv *priv, - struct ieee80211_bss_conf *bss_conf) -{ - struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf; - struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; - struct iwl_ht_info *iwl_conf = &priv->current_ht_config; - - IWL_DEBUG_MAC80211("enter: \n"); - - iwl_conf->is_ht = bss_conf->assoc_ht; - - if (!iwl_conf->is_ht) - return; - - priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) - iwl_conf->sgf |= 0x1; - if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) - iwl_conf->sgf |= 0x2; - - iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD); - iwl_conf->max_amsdu_size = - !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU); - - iwl_conf->supported_chan_width = - !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH); - iwl_conf->extension_chan_offset = - ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET; - /* If no above or below channel supplied disable FAT channel */ - if (iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_ABOVE && - iwl_conf->extension_chan_offset != IWL_EXT_CHANNEL_OFFSET_BELOW) - iwl_conf->supported_chan_width = 0; - - iwl_conf->tx_mimo_ps_mode = - (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); - memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); - - iwl_conf->control_channel = ht_bss_conf->primary_channel; - iwl_conf->tx_chan_width = - !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH); - iwl_conf->ht_protection = - ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION; - iwl_conf->non_GF_STA_present = - !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT); - - IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); - IWL_DEBUG_MAC80211("leave\n"); -} -#else -static inline void iwl4965_ht_conf(struct iwl_priv *priv, - struct ieee80211_bss_conf *bss_conf) -{ -} -#endif - #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -6680,7 +6133,7 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, if (changes & BSS_CHANGED_HT) { IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht); iwl4965_ht_conf(priv, bss_conf); - iwl4965_set_rxon_chain(priv); + iwl_set_rxon_chain(priv); } if (changes & BSS_CHANGED_ASSOC) { @@ -6780,7 +6233,7 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211("enter\n"); - sta_id = iwl4965_hw_find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_MAC80211("leave - %s not in station map.\n", print_mac(mac, addr)); @@ -6827,7 +6280,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, IWL_DEBUG_MAC80211("enter\n"); - if (priv->cfg->mod_params->sw_crypto) { + if (priv->hw_params.sw_crypto) { IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n"); return -EOPNOTSUPP; } @@ -6836,7 +6289,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, /* only support pairwise keys */ return -EOPNOTSUPP; - sta_id = iwl4965_hw_find_station(priv, addr); + sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_MAC80211("leave - %s not in station map.\n", print_mac(mac, addr)); @@ -6873,7 +6326,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (is_default_wep_key) ret = iwl_remove_default_wep_key(priv, key); else - ret = iwl_remove_dynamic_key(priv, sta_id); + ret = iwl_remove_dynamic_key(priv, key, sta_id); IWL_DEBUG_MAC80211("disable hwcrypto key\n"); break; @@ -6886,7 +6339,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, return ret; } -static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, int queue, +static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params) { struct iwl_priv *priv = hw->priv; @@ -6960,9 +6413,9 @@ static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, q = &txq->q; avail = iwl4965_queue_space(q); - stats->data[i].len = q->n_window - avail; - stats->data[i].limit = q->n_window - q->high_mark; - stats->data[i].count = q->n_window; + stats[i].len = q->n_window - avail; + stats[i].limit = q->n_window - q->high_mark; + stats[i].count = q->n_window; } spin_unlock_irqrestore(&priv->lock, flags); @@ -7004,7 +6457,7 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) spin_unlock_irqrestore(&priv->lock, flags); #endif /* CONFIG_IWL4965_HT */ - iwlcore_reset_qos(priv); + iwl_reset_qos(priv); cancel_delayed_work(&priv->post_associate); @@ -7041,6 +6494,8 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) iwl4965_commit_rxon(priv); } + iwl_power_update_mode(priv, 0); + /* Per mac80211.h: This is only used in IBSS mode... */ if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) { @@ -7089,7 +6544,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk IWL_DEBUG_MAC80211("leave\n"); spin_unlock_irqrestore(&priv->lock, flags); - iwlcore_reset_qos(priv); + iwl_reset_qos(priv); queue_work(priv->workqueue, &priv->post_associate.work); @@ -7372,20 +6827,11 @@ static ssize_t store_power_level(struct device *d, goto out; } - if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC)) - mode = IWL_POWER_AC; - else - mode |= IWL_POWER_ENABLED; - - if (mode != priv->power_mode) { - rc = iwl4965_send_power_mode(priv, IWL_POWER_LEVEL(mode)); - if (rc) { - IWL_DEBUG_MAC80211("failed setting power mode.\n"); - goto out; - } - priv->power_mode = mode; + rc = iwl_power_set_user_mode(priv, mode); + if (rc) { + IWL_DEBUG_MAC80211("failed setting power mode.\n"); + goto out; } - rc = count; out: @@ -7415,7 +6861,7 @@ static ssize_t show_power_level(struct device *d, struct device_attribute *attr, char *buf) { struct iwl_priv *priv = dev_get_drvdata(d); - int level = IWL_POWER_LEVEL(priv->power_mode); + int level = priv->power_data.power_mode; char *p = buf; p += sprintf(p, "%d ", level); @@ -7433,14 +6879,14 @@ static ssize_t show_power_level(struct device *d, timeout_duration[level - 1] / 1000, period_duration[level - 1] / 1000); } - +/* if (!(priv->power_mode & IWL_POWER_ENABLED)) p += sprintf(p, " OFF\n"); else p += sprintf(p, " \n"); - +*/ + p += sprintf(p, " \n"); return (p - buf + 1); - } static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, @@ -7493,44 +6939,6 @@ static ssize_t show_statistics(struct device *d, static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL); -static ssize_t show_antenna(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", priv->antenna); -} - -static ssize_t store_antenna(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - int ant; - struct iwl_priv *priv = dev_get_drvdata(d); - - if (count == 0) - return 0; - - if (sscanf(buf, "%1i", &ant) != 1) { - IWL_DEBUG_INFO("not in hex or decimal form.\n"); - return count; - } - - if ((ant >= 0) && (ant <= 2)) { - IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant); - priv->antenna = (enum iwl4965_antenna)ant; - } else - IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant); - - - return count; -} - -static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); - static ssize_t show_status(struct device *d, struct device_attribute *attr, char *buf) { @@ -7613,7 +7021,6 @@ static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) } static struct attribute *iwl4965_sysfs_entries[] = { - &dev_attr_antenna.attr, &dev_attr_channels.attr, &dev_attr_dump_errors.attr, &dev_attr_dump_events.attr, @@ -7711,13 +7118,19 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_master(pdev); - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (err) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + /* both attempts failed: */ if (err) { - printk(KERN_WARNING DRV_NAME - ": No suitable DMA available.\n"); + printk(KERN_WARNING "%s: No suitable DMA available.\n", + DRV_NAME); goto out_pci_disable_device; + } } err = pci_request_regions(pdev, DRV_NAME); @@ -7743,30 +7156,30 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e (unsigned long long) pci_resource_len(pdev, 0)); IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); + iwl_hw_detect(priv); printk(KERN_INFO DRV_NAME - ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); + ": Detected Intel Wireless WiFi Link %s REV=0x%X\n", + priv->cfg->name, priv->hw_rev); - /***************** - * 4. Read EEPROM - *****************/ - /* nic init */ - iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + /* amp init */ + err = priv->cfg->ops->lib->apm_ops.init(priv); if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); + IWL_DEBUG_INFO("Failed to init APMG\n"); goto out_iounmap; } + /***************** + * 4. Read EEPROM + *****************/ /* Read the EEPROM */ err = iwl_eeprom_init(priv); if (err) { IWL_ERROR("Unable to init EEPROM\n"); goto out_iounmap; } + err = iwl_eeprom_check_version(priv); + if (err) + goto out_iounmap; + /* MAC Address location in EEPROM same for 3945/4965 */ iwl_eeprom_get_mac(priv, priv->mac_addr); IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); @@ -7778,7 +7191,7 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* Device-specific setup */ if (priv->cfg->ops->lib->set_hw_params(priv)) { IWL_ERROR("failed to set hw parameters\n"); - goto out_iounmap; + goto out_free_eeprom; } /******************* @@ -7787,7 +7200,7 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e err = iwl_setup(priv); if (err) - goto out_unset_hw_params; + goto out_free_eeprom; /* At this point both hw and priv are initialized. */ /********************************** @@ -7813,7 +7226,7 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e err = sysfs_create_group(&pdev->dev.kobj, &iwl4965_attribute_group); if (err) { IWL_ERROR("failed to create sysfs device attributes\n"); - goto out_unset_hw_params; + goto out_free_eeprom; } err = iwl_dbgfs_register(priv, DRV_NAME); @@ -7837,8 +7250,8 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e out_remove_sysfs: sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); - out_unset_hw_params: - iwl4965_unset_hw_params(priv); + out_free_eeprom: + iwl_eeprom_free(priv); out_iounmap: pci_iounmap(pdev, priv->hw_base); out_pci_release_regions: @@ -7900,8 +7313,8 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) iwl4965_rx_queue_free(priv, &priv->rxq); iwl4965_hw_txq_ctx_free(priv); - iwl4965_unset_hw_params(priv); iwlcore_clear_stations_table(priv); + iwl_eeprom_free(priv); /*netif_stop_queue(dev); */ @@ -7919,7 +7332,7 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); iwl_free_channel_map(priv); - iwl4965_free_geos(priv); + iwlcore_free_geos(priv); if (priv->ibss_beacon) dev_kfree_skb(priv->ibss_beacon); @@ -7969,6 +7382,11 @@ static int iwl4965_pci_resume(struct pci_dev *pdev) static struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, +#ifdef CONFIG_IWL5000 + {IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)}, + {IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)}, + {IWL_PCI_DEVICE(0x423A, PCI_ANY_ID, iwl5350_agn_cfg)}, +#endif /* CONFIG_IWL5000 */ {0} }; MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h index 3dfc2d43c22..4295bc61366 100644 --- a/drivers/net/wireless/libertas/cmd.h +++ b/drivers/net/wireless/libertas/cmd.h @@ -44,7 +44,7 @@ int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan); int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria); int lbs_suspend(struct lbs_private *priv); -int lbs_resume(struct lbs_private *priv); +void lbs_resume(struct lbs_private *priv); int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv, uint16_t cmd_action, uint16_t *timeout); diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index b652fa301e1..0632b09655d 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -64,9 +64,9 @@ void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str); struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no); struct lbs_private *lbs_add_card(void *card, struct device *dmdev); -int lbs_remove_card(struct lbs_private *priv); +void lbs_remove_card(struct lbs_private *priv); int lbs_start_card(struct lbs_private *priv); -int lbs_stop_card(struct lbs_private *priv); +void lbs_stop_card(struct lbs_private *priv); void lbs_host_to_card_done(struct lbs_private *priv); int lbs_update_channel(struct lbs_private *priv); diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 406f54d4095..0be89573716 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -702,7 +702,7 @@ static int lbs_thread(void *data) if (shouldsleep) { lbs_deb_thread("sleeping, connect_status %d, " - "ps_mode %d, ps_state %d\n", + "psmode %d, psstate %d\n", priv->connect_status, priv->psmode, priv->psstate); spin_unlock_irq(&priv->driver_lock); @@ -889,7 +889,7 @@ int lbs_suspend(struct lbs_private *priv) } EXPORT_SYMBOL_GPL(lbs_suspend); -int lbs_resume(struct lbs_private *priv) +void lbs_resume(struct lbs_private *priv) { lbs_deb_enter(LBS_DEB_FW); @@ -905,7 +905,6 @@ int lbs_resume(struct lbs_private *priv) netif_device_attach(priv->mesh_dev); lbs_deb_leave(LBS_DEB_FW); - return 0; } EXPORT_SYMBOL_GPL(lbs_resume); @@ -1155,7 +1154,7 @@ done: EXPORT_SYMBOL_GPL(lbs_add_card); -int lbs_remove_card(struct lbs_private *priv) +void lbs_remove_card(struct lbs_private *priv) { struct net_device *dev = priv->dev; union iwreq_data wrqu; @@ -1167,8 +1166,8 @@ int lbs_remove_card(struct lbs_private *priv) dev = priv->dev; - cancel_delayed_work(&priv->scan_work); - cancel_delayed_work(&priv->assoc_work); + cancel_delayed_work_sync(&priv->scan_work); + cancel_delayed_work_sync(&priv->assoc_work); destroy_workqueue(priv->work_thread); if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { @@ -1190,7 +1189,6 @@ int lbs_remove_card(struct lbs_private *priv) free_netdev(dev); lbs_deb_leave(LBS_DEB_MAIN); - return 0; } EXPORT_SYMBOL_GPL(lbs_remove_card); @@ -1261,15 +1259,17 @@ done: EXPORT_SYMBOL_GPL(lbs_start_card); -int lbs_stop_card(struct lbs_private *priv) +void lbs_stop_card(struct lbs_private *priv) { struct net_device *dev = priv->dev; - int ret = -1; struct cmd_ctrl_node *cmdnode; unsigned long flags; lbs_deb_enter(LBS_DEB_MAIN); + if (!priv) + goto out; + netif_stop_queue(priv->dev); netif_carrier_off(priv->dev); @@ -1279,6 +1279,7 @@ int lbs_stop_card(struct lbs_private *priv) device_remove_file(&dev->dev, &dev_attr_lbs_mesh); /* Flush pending command nodes */ + del_timer_sync(&priv->command_timer); spin_lock_irqsave(&priv->driver_lock, flags); list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { cmdnode->result = -ENOENT; @@ -1289,8 +1290,8 @@ int lbs_stop_card(struct lbs_private *priv) unregister_netdev(dev); - lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); - return ret; +out: + lbs_deb_leave(LBS_DEB_MAIN); } EXPORT_SYMBOL_GPL(lbs_stop_card); @@ -1532,10 +1533,11 @@ static void lbs_remove_rtap(struct lbs_private *priv) { lbs_deb_enter(LBS_DEB_MAIN); if (priv->rtap_net_dev == NULL) - return; + goto out; unregister_netdev(priv->rtap_net_dev); free_netdev(priv->rtap_net_dev); priv->rtap_net_dev = NULL; +out: lbs_deb_leave(LBS_DEB_MAIN); } diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index 06d2c67f4c8..c6f27b9022f 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -64,7 +64,7 @@ struct p54_common { unsigned int tx_hdr_len; void *cached_vdcf; unsigned int fw_var; - struct ieee80211_tx_queue_stats tx_stats; + struct ieee80211_tx_queue_stats tx_stats[4]; }; int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb); diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 63f9badf3f5..33d608a60d7 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -146,10 +146,10 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) if (priv->fw_var >= 0x300) { /* Firmware supports QoS, use it! */ - priv->tx_stats.data[0].limit = 3; - priv->tx_stats.data[1].limit = 4; - priv->tx_stats.data[2].limit = 3; - priv->tx_stats.data[3].limit = 1; + priv->tx_stats[0].limit = 3; + priv->tx_stats[1].limit = 4; + priv->tx_stats[2].limit = 3; + priv->tx_stats[3].limit = 1; dev->queues = 4; } } @@ -379,7 +379,7 @@ static void inline p54_wake_free_queues(struct ieee80211_hw *dev) * But, what if some are full? */ for (i = 0; i < dev->queues; i++) - if (priv->tx_stats.data[i].len < priv->tx_stats.data[i].limit) + if (priv->tx_stats[i].len < priv->tx_stats[i].limit) ieee80211_wake_queue(dev, i); } @@ -417,8 +417,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) memcpy(&status.control, range->control, sizeof(status.control)); kfree(range->control); - priv->tx_stats.data[status.control.queue].len--; - + priv->tx_stats[status.control.queue].len--; entry_hdr = (struct p54_control_hdr *) entry->data; entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) @@ -555,7 +554,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb, struct ieee80211_tx_control *control) { - struct ieee80211_tx_queue_stats_data *current_queue; + struct ieee80211_tx_queue_stats *current_queue; struct p54_common *priv = dev->priv; struct p54_control_hdr *hdr; struct p54_tx_control_allocdata *txhdr; @@ -563,7 +562,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb, size_t padding, len; u8 rate; - current_queue = &priv->tx_stats.data[control->queue]; + current_queue = &priv->tx_stats[control->queue]; if (unlikely(current_queue->len > current_queue->limit)) return NETDEV_TX_BUSY; current_queue->len++; @@ -936,7 +935,7 @@ static void p54_configure_filter(struct ieee80211_hw *dev, } } -static int p54_conf_tx(struct ieee80211_hw *dev, int queue, +static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue, const struct ieee80211_tx_queue_params *params) { struct p54_common *priv = dev->priv; @@ -945,7 +944,7 @@ static int p54_conf_tx(struct ieee80211_hw *dev, int queue, vdcf = (struct p54_tx_control_vdcf *)(((struct p54_control_hdr *) ((void *)priv->cached_vdcf + priv->tx_hdr_len))->data); - if ((params) && !((queue < 0) || (queue > 4))) { + if ((params) && !(queue > 4)) { P54_SET_QUEUE(vdcf->queue[queue], params->aifs, params->cw_min, params->cw_max, params->txop); } else @@ -967,11 +966,8 @@ static int p54_get_tx_stats(struct ieee80211_hw *dev, struct ieee80211_tx_queue_stats *stats) { struct p54_common *priv = dev->priv; - unsigned int i; - for (i = 0; i < dev->queues; i++) - memcpy(&stats->data[i], &priv->tx_stats.data[i], - sizeof(stats->data[i])); + memcpy(stats, &priv->tx_stats, sizeof(stats[0]) * dev->queues); return 0; } @@ -1008,7 +1004,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) dev->channel_change_time = 1000; /* TODO: find actual value */ dev->max_rssi = 127; - priv->tx_stats.data[0].limit = 5; + priv->tx_stats[0].limit = 5; dev->queues = 1; dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 + diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index ab1029e7988..0ace7614942 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -5,12 +5,16 @@ config RT2X00 This will enable the experimental support for the Ralink drivers, developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. - These drivers will make use of the mac80211 stack. + These drivers make use of the mac80211 stack. When building one of the individual drivers, the rt2x00 library will also be created. That library (when the driver is built as a module) will be called "rt2x00lib.ko". + Additionally PCI and USB libraries will also be build depending + on the types of drivers being selected, these libraries will be + called "rt2x00pci.ko" and "rt2x00usb.ko". + if RT2X00 config RT2X00_LIB @@ -40,26 +44,27 @@ config RT2X00_LIB_LEDS depends on RT2X00_LIB config RT2400PCI - tristate "Ralink rt2400 pci/pcmcia support" + tristate "Ralink rt2400 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- - This is an experimental driver for the Ralink rt2400 wireless chip. + This adds support for rt2400 wireless chipset family. + Supported chips: RT2460. When compiled as a module, this driver will be called "rt2400pci.ko". config RT2400PCI_RFKILL - bool "RT2400 rfkill support" + bool "Ralink rt2400 rfkill support" depends on RT2400PCI select RT2X00_LIB_RFKILL ---help--- - This adds support for integrated rt2400 devices that feature a + This adds support for integrated rt2400 hardware that features a hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. config RT2400PCI_LEDS - bool "RT2400 leds support" + bool "Ralink rt2400 leds support" depends on RT2400PCI select LEDS_CLASS select RT2X00_LIB_LEDS @@ -67,26 +72,27 @@ config RT2400PCI_LEDS This adds support for led triggers provided my mac80211. config RT2500PCI - tristate "Ralink rt2500 pci/pcmcia support" + tristate "Ralink rt2500 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- - This is an experimental driver for the Ralink rt2500 wireless chip. + This adds support for rt2500 wireless chipset family. + Supported chips: RT2560. When compiled as a module, this driver will be called "rt2500pci.ko". config RT2500PCI_RFKILL - bool "RT2500 rfkill support" + bool "Ralink rt2500 rfkill support" depends on RT2500PCI select RT2X00_LIB_RFKILL ---help--- - This adds support for integrated rt2500 devices that feature a + This adds support for integrated rt2500 hardware that features a hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. config RT2500PCI_LEDS - bool "RT2500 leds support" + bool "Ralink rt2500 leds support" depends on RT2500PCI select LEDS_CLASS select RT2X00_LIB_LEDS @@ -94,28 +100,29 @@ config RT2500PCI_LEDS This adds support for led triggers provided my mac80211. config RT61PCI - tristate "Ralink rt61 pci/pcmcia support" + tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE select CRC_ITU_T select EEPROM_93CX6 ---help--- - This is an experimental driver for the Ralink rt61 wireless chip. + This adds support for rt2501 wireless chipset family. + Supported chips: RT2561, RT2561S & RT2661. When compiled as a module, this driver will be called "rt61pci.ko". config RT61PCI_RFKILL - bool "RT61 rfkill support" + bool "Ralink rt2501/rt61 rfkill support" depends on RT61PCI select RT2X00_LIB_RFKILL ---help--- - This adds support for integrated rt61 devices that feature a + This adds support for integrated rt61 hardware that features a hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. config RT61PCI_LEDS - bool "RT61 leds support" + bool "Ralink rt2501/rt61 leds support" depends on RT61PCI select LEDS_CLASS select RT2X00_LIB_LEDS @@ -123,16 +130,17 @@ config RT61PCI_LEDS This adds support for led triggers provided my mac80211. config RT2500USB - tristate "Ralink rt2500 usb support" + tristate "Ralink rt2500 (USB) support" depends on USB select RT2X00_LIB_USB ---help--- - This is an experimental driver for the Ralink rt2500 wireless chip. + This adds support for rt2500 wireless chipset family. + Supported chips: RT2571 & RT2572. When compiled as a module, this driver will be called "rt2500usb.ko". config RT2500USB_LEDS - bool "RT2500 leds support" + bool "Ralink rt2500 leds support" depends on RT2500USB select LEDS_CLASS select RT2X00_LIB_LEDS @@ -140,18 +148,19 @@ config RT2500USB_LEDS This adds support for led triggers provided my mac80211. config RT73USB - tristate "Ralink rt73 usb support" + tristate "Ralink rt2501/rt73 (USB) support" depends on USB select RT2X00_LIB_USB select RT2X00_LIB_FIRMWARE select CRC_ITU_T ---help--- - This is an experimental driver for the Ralink rt73 wireless chip. + This adds support for rt2501 wireless chipset family. + Supported chips: RT2571W, RT2573 & RT2671. When compiled as a module, this driver will be called "rt73usb.ko". config RT73USB_LEDS - bool "RT73 leds support" + bool "Ralink rt2501/rt73 leds support" depends on RT73USB select LEDS_CLASS select RT2X00_LIB_LEDS @@ -164,7 +173,7 @@ config RT2X00_LIB_DEBUGFS ---help--- Enable creation of debugfs files for the rt2x00 drivers. These debugfs files support both reading and writing of the - most important register types of the rt2x00 devices. + most important register types of the rt2x00 hardware. config RT2X00_DEBUG bool "Ralink debug output" diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 560b9c73c0b..247fbbfb0f2 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1055,11 +1055,11 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { rt2x00pci_register_read(rt2x00dev, CSR14, ®); if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); @@ -1071,12 +1071,9 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TXCSR0_KICK_TX, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, - (queue == RT2X00_BCN_QUEUE_ATIM)); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } @@ -1120,7 +1117,7 @@ static void rt2400pci_fill_rxdone(struct queue_entry *entry, * Interrupt functions. */ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum ieee80211_tx_queue queue_idx) + const enum data_queue_qid queue_idx) { struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); struct queue_entry_priv_pci_tx *priv_tx; @@ -1187,19 +1184,19 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) * 3 - Atim ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2400pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + rt2400pci_txdone(rt2x00dev, QID_ATIM); /* * 4 - Priority ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt2400pci_txdone(rt2x00dev, QID_AC_BE); /* * 5 - Tx ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt2400pci_txdone(rt2x00dev, QID_AC_BK); return IRQ_HANDLED; } @@ -1445,8 +1442,7 @@ static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, return 0; } -static int rt2400pci_conf_tx(struct ieee80211_hw *hw, - int queue, +static int rt2400pci_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -1456,7 +1452,7 @@ static int rt2400pci_conf_tx(struct ieee80211_hw *hw, * per queue. So by default we only configure the TX queue, * and ignore all other configurations. */ - if (queue != IEEE80211_TX_QUEUE_DATA0) + if (queue != 0) return -EINVAL; if (rt2x00mac_conf_tx(hw, queue, params)) @@ -1521,20 +1517,13 @@ static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, rt2x00pci_register_write(rt2x00dev, CSR14, reg); /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* * Enable beacon generation. * Write entire beacon with descriptor to register, * and kick the beacon generator. */ + rt2x00lib_write_tx_desc(rt2x00dev, skb, control); memcpy(priv_tx->data, skb->data, skb->len); - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index a5ed54b6926..0d53c75d55d 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -317,8 +317,7 @@ static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00intf_conf *conf, const unsigned int flags) { - struct data_queue *queue = - rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON); unsigned int bcn_preload; u32 reg; @@ -1210,11 +1209,11 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { rt2x00pci_register_read(rt2x00dev, CSR14, ®); if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); @@ -1226,12 +1225,9 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TXCSR0_KICK_TX, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, - (queue == RT2X00_BCN_QUEUE_ATIM)); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } @@ -1276,7 +1272,7 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry, * Interrupt functions. */ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum ieee80211_tx_queue queue_idx) + const enum data_queue_qid queue_idx) { struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); struct queue_entry_priv_pci_tx *priv_tx; @@ -1343,19 +1339,19 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) * 3 - Atim ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2500pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + rt2500pci_txdone(rt2x00dev, QID_ATIM); /* * 4 - Priority ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt2500pci_txdone(rt2x00dev, QID_AC_BE); /* * 5 - Tx ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt2500pci_txdone(rt2x00dev, QID_AC_BK); return IRQ_HANDLED; } @@ -1834,20 +1830,13 @@ static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, rt2x00pci_register_write(rt2x00dev, CSR14, reg); /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* * Enable beacon generation. * Write entire beacon with descriptor to register, * and kick the beacon generator. */ + rt2x00lib_write_tx_desc(rt2x00dev, skb, control); memcpy(priv_tx->data, skb->data, skb->len); - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index fdbd0ef2be4..80b34d47114 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -76,10 +76,10 @@ static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u16 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT16(length)); } static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, @@ -106,10 +106,10 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u16 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT16(length)); } static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev) @@ -1094,11 +1094,11 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u16 reg; - if (queue != RT2X00_BCN_QUEUE_BEACON) + if (queue != QID_BEACON) return; rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); @@ -1720,12 +1720,6 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* @@ -1757,7 +1751,7 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, /* * Enable beacon generation. */ - rt2500usb_kick_tx_queue(rt2x00dev, control->queue); + rt2500usb_kick_tx_queue(rt2x00dev, QID_BEACON); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 57bdc153952..79bd9c9f896 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.1.4" +#define DRV_VERSION "2.1.5" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -404,7 +404,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) * @supported_rates: Rate types which are supported (CCK, OFDM). * @num_channels: Number of supported channels. This is used as array size * for @tx_power_a, @tx_power_bg and @channels. - * channels: Device/chipset specific channel values (See &struct rf_channel). + * @channels: Device/chipset specific channel values (See &struct rf_channel). * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL). * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL). * @tx_power_default: Default TX power value to use when either @@ -548,7 +548,7 @@ struct rt2x00lib_ops { int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, - const unsigned int queue); + const enum data_queue_qid queue); /* * RX control handlers @@ -621,7 +621,6 @@ enum rt2x00_flags { /* * Driver features */ - DRIVER_SUPPORT_MIXED_INTERFACES, DRIVER_REQUIRE_FIRMWARE, DRIVER_REQUIRE_BEACON_GUARD, DRIVER_REQUIRE_ATIM_QUEUE, @@ -928,17 +927,16 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) } /** - * rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue + * rt2x00queue_get_queue - Convert queue index to queue pointer * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @queue: mac80211/rt2x00 queue index - * (see &enum ieee80211_tx_queue and &enum rt2x00_bcn_queue). + * @queue: rt2x00 queue index (see &enum data_queue_qid). */ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue); + const enum data_queue_qid queue); /** * rt2x00queue_get_entry - Get queue entry where the given index points to. - * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: Pointer to &struct data_queue from where we obtain the entry. * @index: Index identifier for obtaining the correct index. */ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, @@ -947,7 +945,7 @@ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, /** * rt2x00queue_index_inc - Index incrementation function * @queue: Queue (&struct data_queue) to perform the action on. - * @action: Index type (&enum queue_index) to perform the action on. + * @index: Index type (&enum queue_index) to perform the action on. * * This function will increase the requested index on the queue, * it will grab the appropriate locks and handle queue overflow events by @@ -999,7 +997,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, u32 changes); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b22c0273718..61510c51935 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -525,9 +525,6 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - tx_status.queue_length = entry->queue->limit; - tx_status.queue_number = tx_status.control.queue; - if (tx_status.control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { if (success) rt2x00dev->low_level_stats.dot11RTSSuccessCount++; @@ -687,8 +684,7 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Beacons and probe responses require the tsf timestamp * to be inserted into the frame. */ - if (control->queue == RT2X00_BCN_QUEUE_BEACON || - is_probe_resp(frame_control)) + if (txdesc.queue == QID_BEACON || is_probe_resp(frame_control)) __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc.flags); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c206b509207..767e0ffce04 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -81,6 +81,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, { struct rt2x00_dev *rt2x00dev = hw->priv; struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; + enum data_queue_qid qid = mac80211_queue_to_qid(control->queue); struct data_queue *queue; struct skb_frame_desc *skbdesc; u16 frame_control; @@ -101,14 +102,13 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, */ if (control->flags & IEEE80211_TXCTL_SEND_AFTER_DTIM && test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) - queue = rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + queue = rt2x00queue_get_queue(rt2x00dev, QID_ATIM); else - queue = rt2x00queue_get_queue(rt2x00dev, control->queue); + queue = rt2x00queue_get_queue(rt2x00dev, qid); if (unlikely(!queue)) { ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" - "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); + "Please file bug report to %s.\n", qid, DRV_PROJECT); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -118,11 +118,16 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, * create and queue that frame first. But make sure we have * at least enough entries available to send this CTS/RTS * frame as well as the data frame. + * Note that when the driver has set the set_rts_threshold() + * callback function it doesn't need software generation of + * neither RTS or CTS-to-self frames and handles everything + * inside the hardware. */ frame_control = le16_to_cpu(ieee80211hdr->frame_control); if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) && (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS | - IEEE80211_TXCTL_USE_CTS_PROTECT))) { + IEEE80211_TXCTL_USE_CTS_PROTECT)) && + !rt2x00dev->ops->hw->set_rts_threshold) { if (rt2x00queue_available(queue) <= 1) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; @@ -149,7 +154,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, ieee80211_stop_queue(rt2x00dev->hw, control->queue); if (rt2x00dev->ops->lib->kick_tx_queue) - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, qid); return NETDEV_TX_OK; } @@ -182,8 +187,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, { struct rt2x00_dev *rt2x00dev = hw->priv; struct rt2x00_intf *intf = vif_to_intf(conf->vif); - struct data_queue *queue = - rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON); struct queue_entry *entry = NULL; unsigned int i; @@ -196,13 +200,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, return -ENODEV; /* - * When we don't support mixed interfaces (a combination - * of sta and ap virtual interfaces) then we can only - * add this interface when the rival interface count is 0. + * We don't support mixed combinations of sta and ap virtual + * interfaces. We can only add this interface when the rival + * interface count is 0. */ - if (!test_bit(DRIVER_SUPPORT_MIXED_INTERFACES, &rt2x00dev->flags) && - ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) || - (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count))) + if ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) || + (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count)) return -ENOBUFS; /* @@ -454,9 +457,9 @@ int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, unsigned int i; for (i = 0; i < hw->queues; i++) { - stats->data[i].len = rt2x00dev->tx[i].length; - stats->data[i].limit = rt2x00dev->tx[i].limit; - stats->data[i].count = rt2x00dev->tx[i].count; + stats[i].len = rt2x00dev->tx[i].length; + stats[i].limit = rt2x00dev->tx[i].limit; + stats[i].count = rt2x00dev->tx[i].count; } return 0; @@ -514,7 +517,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx, +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 971af2546b5..c17078eac19 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -53,7 +53,7 @@ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, ERROR(rt2x00dev, "Arrived at non-free entry in the non-full queue %d.\n" "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); + entry->queue->qid, DRV_PROJECT); return -EINVAL; } diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 9d1cdb99431..2b0ef17bba6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -98,8 +98,9 @@ int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, * struct queue_entry_priv_pci_rx: Per RX entry PCI specific information * * @desc: Pointer to device descriptor. + * @desc_dma: DMA pointer to @desc. * @data: Pointer to device's entry memory. - * @dma: DMA pointer to &data. + * @data_dma: DMA pointer to &data. */ struct queue_entry_priv_pci_rx { __le32 *desc; @@ -113,8 +114,9 @@ struct queue_entry_priv_pci_rx { * struct queue_entry_priv_pci_tx: Per TX entry PCI specific information * * @desc: Pointer to device descriptor + * @desc_dma: DMA pointer to @desc. * @data: Pointer to device's entry memory. - * @dma: DMA pointer to &data. + * @data_dma: DMA pointer to &data. * @control: mac80211 control structure used to transmit data. */ struct queue_entry_priv_pci_tx { diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 659e9f44c40..e5b861f8416 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -30,7 +30,7 @@ #include "rt2x00lib.h" struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); @@ -40,9 +40,9 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, if (!rt2x00dev->bcn) return NULL; - if (queue == RT2X00_BCN_QUEUE_BEACON) + if (queue == QID_BEACON) return &rt2x00dev->bcn[0]; - else if (queue == RT2X00_BCN_QUEUE_ATIM && atim) + else if (queue == QID_ATIM && atim) return &rt2x00dev->bcn[1]; return NULL; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 7027c9f47d3..d1707a7ca41 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -54,6 +54,17 @@ /** * enum data_queue_qid: Queue identification + * + * @QID_AC_BE: AC BE queue + * @QID_AC_BK: AC BK queue + * @QID_AC_VI: AC VI queue + * @QID_AC_VO: AC VO queue + * @QID_HCCA: HCCA queue + * @QID_MGMT: MGMT queue (prio queue) + * @QID_RX: RX queue + * @QID_OTHER: None of the above (don't use, only present for completeness) + * @QID_BEACON: Beacon queue (value unspecified, don't send it to device) + * @QID_ATIM: Atim queue (value unspeficied, don't send it to device) */ enum data_queue_qid { QID_AC_BE = 0, @@ -64,22 +75,22 @@ enum data_queue_qid { QID_MGMT = 13, QID_RX = 14, QID_OTHER = 15, + QID_BEACON, + QID_ATIM, }; /** - * enum rt2x00_bcn_queue: Beacon queue index - * - * Start counting with a high offset, this because this enumeration - * supplements &enum ieee80211_tx_queue and we should prevent value - * conflicts. - * - * @RT2X00_BCN_QUEUE_BEACON: Beacon queue - * @RT2X00_BCN_QUEUE_ATIM: Atim queue (sends frame after beacon) + * mac80211_queue_to_qid - Convert mac80211 queue to rt2x00 qid + * @queue: mac80211 queue. */ -enum rt2x00_bcn_queue { - RT2X00_BCN_QUEUE_BEACON = 100, - RT2X00_BCN_QUEUE_ATIM = 101, -}; +static inline enum data_queue_qid mac80211_queue_to_qid(unsigned int queue) +{ + /* Regular TX queues are mapped directly */ + if (queue < 4) + return queue; + WARN_ON(1); + return QID_OTHER; +} /** * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc @@ -105,7 +116,6 @@ enum skb_frame_desc_flags { * of the scope of the skb->data pointer. * @data_len: Length of the frame data. * @desc_len: Length of the frame descriptor. - * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { @@ -240,7 +250,6 @@ struct txentry_desc { * encryption or decryption. The entry should only be touched after * the device has signaled it is done with it. */ - enum queue_entry_flags { ENTRY_BCN_ASSIGNED, ENTRY_OWNER_DEVICE_DATA, diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5a331674dcb..98aafc2d584 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -186,7 +186,7 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, ERROR(rt2x00dev, "Arrived at non-free entry in the non-full queue %d.\n" "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); + entry->queue->qid, DRV_PROJECT); return -EINVAL; } @@ -344,7 +344,7 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; unsigned int i; - rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, + rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, REGISTER_TIMEOUT); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 11e55180cba..4da9eb376eb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -47,6 +47,20 @@ #define REGISTER_TIMEOUT 500 #define REGISTER_TIMEOUT_FIRMWARE 1000 +/** + * REGISTER_TIMEOUT16 - Determine the timeout for 16bit register access + * @__datalen: Data length + */ +#define REGISTER_TIMEOUT16(__datalen) \ + ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u16)) ) + +/** + * REGISTER_TIMEOUT32 - Determine the timeout for 32bit register access + * @__datalen: Data length + */ +#define REGISTER_TIMEOUT32(__datalen) \ + ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u32)) ) + /* * Cache size */ @@ -185,13 +199,12 @@ static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev, * kmalloc for correct handling inside the kernel USB layer. */ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, - __le16 *eeprom, const u16 lenght) + __le16 *eeprom, const u16 length) { - int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); - return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, USB_VENDOR_REQUEST_IN, 0, 0, - eeprom, lenght, timeout); + eeprom, length, + REGISTER_TIMEOUT16(length)); } /* diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 14bc7b28165..b64f2f5d0d5 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1591,11 +1591,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { /* * For Wi-Fi faily generated beacons between participating * stations. Set TBTT phase adaptive adjustment step to 8us. @@ -1613,14 +1613,10 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, - (queue == IEEE80211_TX_QUEUE_DATA2)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, - (queue == IEEE80211_TX_QUEUE_DATA3)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } @@ -2400,24 +2396,17 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ + rt2x00lib_write_tx_desc(rt2x00dev, skb, control); beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); rt2x00pci_register_multiwrite(rt2x00dev, beacon_base, skbdesc->desc, skbdesc->desc_len); rt2x00pci_register_multiwrite(rt2x00dev, beacon_base + skbdesc->desc_len, skbdesc->data, skbdesc->data_len); - rt61pci_kick_tx_queue(rt2x00dev, control->queue); + rt61pci_kick_tx_queue(rt2x00dev, QID_BEACON); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index da19a3a91f4..351d95c4f50 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -74,10 +74,10 @@ static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u32 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT32(length)); } static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev, @@ -102,10 +102,10 @@ static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u32 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT32(length)); } static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev) @@ -876,7 +876,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, char *ptr = data; char *cache; int buflen; - int timeout; /* * Wait for stable hardware. @@ -907,14 +906,14 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32)); memcpy(cache, ptr, buflen); rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, FIRMWARE_IMAGE_BASE + i, 0, - cache, buflen, timeout); + cache, buflen, + REGISTER_TIMEOUT32(buflen)); ptr += buflen; } @@ -1331,11 +1330,11 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * TX data initialization */ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue != RT2X00_BCN_QUEUE_BEACON) + if (queue != QID_BEACON) return; /* @@ -1966,7 +1965,6 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, struct rt2x00_intf *intf = vif_to_intf(control->vif); struct skb_frame_desc *skbdesc; unsigned int beacon_base; - unsigned int timeout; u32 reg; if (unlikely(!intf->beacon)) @@ -2001,23 +1999,16 @@ static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ + rt2x00lib_write_tx_desc(rt2x00dev, skb, control); beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32)); rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, beacon_base, 0, - skb->data, skb->len, timeout); - rt73usb_kick_tx_queue(rt2x00dev, control->queue); + skb->data, skb->len, + REGISTER_TIMEOUT32(skb->len)); + rt73usb_kick_tx_queue(rt2x00dev, QID_BEACON); return 0; } diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 57c4ccfab1e..f883dcfffe0 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -510,17 +510,15 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); if (err) { - /* check for rev 4 sprom - has special signature */ - if (buf[32] == 0x5372) { - kfree(buf); - buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), - GFP_KERNEL); - if (!buf) - goto out; - bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; - sprom_do_read(bus, buf); - err = sprom_check_crc(buf, bus->sprom_size); - } + /* try for a 440 byte SPROM - revision 4 and higher */ + kfree(buf); + buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!buf) + goto out; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); if (err) ssb_printk(KERN_WARNING PFX "WARNING: Invalid" " SPROM CRC (corrupt SPROM)\n"); diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 529816bfbc5..b31399e1fd8 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -1262,9 +1262,6 @@ extern int ieee80211_set_encryption(struct ieee80211_device *ieee); /* ieee80211_tx.c */ extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); -extern int ieee80211_tx_frame(struct ieee80211_device *ieee, - struct ieee80211_hdr *frame, int hdr_len, - int total_len, int encrypt_mpdu); /* ieee80211_rx.c */ extern void ieee80211_rx_any(struct ieee80211_device *ieee, @@ -1312,14 +1309,6 @@ extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *extra); -extern int ieee80211_wx_set_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra); -extern int ieee80211_wx_get_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra); static inline void ieee80211_increment_scans(struct ieee80211_device *ieee) { diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4a80d74975e..75a34609eed 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -98,6 +98,18 @@ struct ieee80211_ht_bss_info { }; /** + * enum ieee80211_max_queues - maximum number of queues + * + * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. + * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable + * for A-MPDU operation. + */ +enum ieee80211_max_queues { + IEEE80211_MAX_QUEUES = 16, + IEEE80211_MAX_AMPDU_QUEUES = 16, +}; + +/** * struct ieee80211_tx_queue_params - transmit queue configuration * * The information provided in this structure is required for QoS @@ -117,58 +129,18 @@ struct ieee80211_tx_queue_params { }; /** - * struct ieee80211_tx_queue_stats_data - transmit queue statistics + * struct ieee80211_tx_queue_stats - transmit queue statistics * * @len: number of packets in queue * @limit: queue length limit * @count: number of frames sent */ -struct ieee80211_tx_queue_stats_data { +struct ieee80211_tx_queue_stats { unsigned int len; unsigned int limit; unsigned int count; }; -/** - * enum ieee80211_tx_queue - transmit queue number - * - * These constants are used with some callbacks that take a - * queue number to set parameters for a queue. - * - * @IEEE80211_TX_QUEUE_DATA0: data queue 0 - * @IEEE80211_TX_QUEUE_DATA1: data queue 1 - * @IEEE80211_TX_QUEUE_DATA2: data queue 2 - * @IEEE80211_TX_QUEUE_DATA3: data queue 3 - * @IEEE80211_TX_QUEUE_DATA4: data queue 4 - * @IEEE80211_TX_QUEUE_SVP: ?? - * @NUM_TX_DATA_QUEUES: number of data queues - * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be - * sent after a beacon - * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames - * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU - */ -enum ieee80211_tx_queue { - IEEE80211_TX_QUEUE_DATA0, - IEEE80211_TX_QUEUE_DATA1, - IEEE80211_TX_QUEUE_DATA2, - IEEE80211_TX_QUEUE_DATA3, - IEEE80211_TX_QUEUE_DATA4, - IEEE80211_TX_QUEUE_SVP, - - NUM_TX_DATA_QUEUES, - -/* due to stupidity in the sub-ioctl userspace interface, the items in - * this struct need to have fixed values. As soon as it is removed, we can - * fix these entries. */ - IEEE80211_TX_QUEUE_AFTER_BEACON = 6, - IEEE80211_TX_QUEUE_BEACON = 7, - NUM_TX_DATA_QUEUES_AMPDU = 16 -}; - -struct ieee80211_tx_queue_stats { - struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES_AMPDU]; -}; - struct ieee80211_low_level_stats { unsigned int dot11ACKFailureCount; unsigned int dot11RTSFailureCount; @@ -286,8 +258,17 @@ enum mac80211_tx_control_flags { /* Transmit control fields. This data structure is passed to low-level driver * with each TX frame. The low-level driver is responsible for configuring - * the hardware to use given values (depending on what is supported). */ - + * the hardware to use given values (depending on what is supported). + * + * NOTE: Be careful with using the pointers outside of the ieee80211_ops->tx() + * context (i.e. when defering the work to a workqueue). + * The vif pointer is valid until the it has been removed with the + * ieee80211_ops->remove_interface() callback funtion. + * The hw_key pointer is valid until it has been removed with the + * ieee80211_ops->set_key() callback function. + * The tx_rate and alt_retry_rate pointers are valid until the phy is + * deregistered. + */ struct ieee80211_tx_control { struct ieee80211_vif *vif; struct ieee80211_rate *tx_rate; @@ -298,9 +279,11 @@ struct ieee80211_tx_control { /* retry rate for the last retries */ struct ieee80211_rate *alt_retry_rate; + /* Key used for hardware encryption + * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ + struct ieee80211_key_conf *hw_key; + u32 flags; /* tx control flags defined above */ - u8 key_idx; /* keyidx from hw->set_key(), undefined if - * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */ @@ -308,7 +291,7 @@ struct ieee80211_tx_control { * position represents antenna number used */ u8 icv_len; /* length of the ICV/MIC field in octets */ u8 iv_len; /* length of the IV field in octets */ - u8 queue; /* hardware queue to use for this frame; + u16 queue; /* hardware queue to use for this frame; * 0 = highest, hw->queues-1 = lowest */ u16 aid; /* Station AID */ int type; /* internal */ @@ -410,8 +393,6 @@ enum ieee80211_tx_status_flags { * @ampdu_ack_map: block ack bit map for the aggregation. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ack_signal: signal strength of the ACK frame - * @queue_length: ?? REMOVE - * @queue_number: ?? REMOVE */ struct ieee80211_tx_status { struct ieee80211_tx_control control; @@ -421,8 +402,6 @@ struct ieee80211_tx_status { u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - int queue_length; - int queue_number; }; /** @@ -610,11 +589,14 @@ enum ieee80211_key_alg { * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by * the driver for a TKIP key if it requires Michael MIC * generation in software. + * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates + * that the key is pairwise rather then a shared key. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_WMM_STA = 1<<0, IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, + IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, }; /** @@ -766,7 +748,14 @@ enum ieee80211_hw_flags { * @max_noise: like @max_rssi, but for the noise value. * * @queues: number of available hardware transmit queues for - * data packets. WMM/QoS requires at least four. + * data packets. WMM/QoS requires at least four, these + * queues need to have configurable access parameters. + * + * @ampdu_queues: number of available hardware transmit queues + * for A-MPDU packets, these have no access parameters + * because they're used only for A-MPDU frames. Note that + * mac80211 will not currently use any of the regular queues + * for aggregation. * * @rate_control_algorithm: rate control algorithm for this hardware. * If unset (NULL), the default algorithm will be used. Must be @@ -785,7 +774,7 @@ struct ieee80211_hw { unsigned int extra_tx_headroom; int channel_change_time; int vif_data_size; - u8 queues; + u16 queues, ampdu_queues; s8 max_rssi; s8 max_signal; s8 max_noise; @@ -1063,15 +1052,13 @@ enum ieee80211_ampdu_mlme_action { * of assocaited station or AP. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), - * bursting) for a hardware TX queue. The @queue parameter uses the - * %IEEE80211_TX_QUEUE_* constants. Must be atomic. + * bursting) for a hardware TX queue. Must be atomic. * * @get_tx_stats: Get statistics of the current TX queue status. This is used * to get number of currently queued packets (queue length), maximum queue * size (limit), and total number of packets sent using each TX queue - * (count). This information is used for WMM to find out which TX - * queues have room for more packets and by hostapd to provide - * statistics about the current queueing state to external programs. + * (count). The 'stats' pointer points to an array that has hw->queues + + * hw->ampdu_queues items. * * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, * this is only used for IBSS mode debugging and, as such, is not a @@ -1145,7 +1132,7 @@ struct ieee80211_ops { u32 short_retry, u32 long_retr); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, const u8 *addr); - int (*conf_tx)(struct ieee80211_hw *hw, int queue, + int (*conf_tx)(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params); int (*get_tx_stats)(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats); diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 90b1e8d23b1..5672d489e92 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -179,6 +179,8 @@ int sctp_eps_proc_init(void); void sctp_eps_proc_exit(void); int sctp_assocs_proc_init(void); void sctp_assocs_proc_exit(void); +int sctp_remaddr_proc_init(void); +void sctp_remaddr_proc_exit(void); /* diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 0ce0443c5b7..e11151702be 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -300,6 +300,7 @@ struct sctp_sock { /* The default SACK delay timeout for new associations. */ __u32 sackdelay; + __u32 sackfreq; /* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */ __u32 param_flags; @@ -938,6 +939,7 @@ struct sctp_transport { /* SACK delay timeout */ unsigned long sackdelay; + __u32 sackfreq; /* When was the last time (in jiffies) that we heard from this * transport? We use this to pick new active and retran paths. @@ -1542,6 +1544,7 @@ struct sctp_association { * : SACK's are not delayed (see Section 6). */ __u8 sack_needed; /* Do we need to sack the peer? */ + __u32 sack_cnt; /* These are capabilities which our peer advertised. */ __u8 ecn_capable; /* Can peer do ECN? */ @@ -1651,6 +1654,7 @@ struct sctp_association { /* SACK delay timeout */ unsigned long sackdelay; + __u32 sackfreq; unsigned long timeouts[SCTP_NUM_TIMEOUT_TYPES]; diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 9619b9d35c9..f205b10f0ab 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -93,8 +93,9 @@ enum sctp_optname { #define SCTP_STATUS SCTP_STATUS SCTP_GET_PEER_ADDR_INFO, #define SCTP_GET_PEER_ADDR_INFO SCTP_GET_PEER_ADDR_INFO - SCTP_DELAYED_ACK_TIME, -#define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK_TIME + SCTP_DELAYED_ACK, +#define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK +#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK SCTP_CONTEXT, /* Receive Context */ #define SCTP_CONTEXT SCTP_CONTEXT SCTP_FRAGMENT_INTERLEAVE, @@ -136,12 +137,14 @@ enum sctp_optname { #define SCTP_GET_LOCAL_ADDRS_NUM_OLD SCTP_GET_LOCAL_ADDRS_NUM_OLD SCTP_GET_LOCAL_ADDRS_OLD, /* Get all local addresss. */ #define SCTP_GET_LOCAL_ADDRS_OLD SCTP_GET_LOCAL_ADDRS_OLD - SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */ -#define SCTP_SOCKOPT_CONNECTX SCTP_SOCKOPT_CONNECTX + SCTP_SOCKOPT_CONNECTX_OLD, /* CONNECTX old requests. */ +#define SCTP_SOCKOPT_CONNECTX_OLD SCTP_SOCKOPT_CONNECTX_OLD SCTP_GET_PEER_ADDRS, /* Get all peer addresss. */ #define SCTP_GET_PEER_ADDRS SCTP_GET_PEER_ADDRS SCTP_GET_LOCAL_ADDRS, /* Get all local addresss. */ #define SCTP_GET_LOCAL_ADDRS SCTP_GET_LOCAL_ADDRS + SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */ +#define SCTP_SOCKOPT_CONNECTX SCTP_SOCKOPT_CONNECTX }; /* @@ -618,13 +621,26 @@ struct sctp_authkeyid { }; -/* 7.1.23. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) +/* + * 7.1.23. Get or set delayed ack timer (SCTP_DELAYED_SACK) * - * This options will get or set the delayed ack timer. The time is set - * in milliseconds. If the assoc_id is 0, then this sets or gets the - * endpoints default delayed ack timer value. If the assoc_id field is - * non-zero, then the set or get effects the specified association. + * This option will effect the way delayed acks are performed. This + * option allows you to get or set the delayed ack time, in + * milliseconds. It also allows changing the delayed ack frequency. + * Changing the frequency to 1 disables the delayed sack algorithm. If + * the assoc_id is 0, then this sets or gets the endpoints default + * values. If the assoc_id field is non-zero, then the set or get + * effects the specified association for the one to many model (the + * assoc_id field is ignored by the one to one model). Note that if + * sack_delay or sack_freq are 0 when setting this option, then the + * current values will remain unchanged. */ +struct sctp_sack_info { + sctp_assoc_t sack_assoc_id; + uint32_t sack_delay; + uint32_t sack_freq; +}; + struct sctp_assoc_value { sctp_assoc_t assoc_id; uint32_t assoc_value; diff --git a/include/net/tipc/tipc_port.h b/include/net/tipc/tipc_port.h index 11105bcc445..9923e41a821 100644 --- a/include/net/tipc/tipc_port.h +++ b/include/net/tipc/tipc_port.h @@ -84,7 +84,8 @@ struct tipc_port { u32 tipc_createport_raw(void *usr_handle, u32 (*dispatcher)(struct tipc_port *, struct sk_buff *), void (*wakeup)(struct tipc_port *), - const u32 importance); + const u32 importance, + struct tipc_port **tp_ptr); int tipc_reject_msg(struct sk_buff *buf, u32 err); diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index d8b02603cbe..d996547f7a6 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -542,90 +542,4 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) return 1; } -/* Incoming 802.11 strucure is converted to a TXB - * a block of 802.11 fragment packets (stored as skbs) */ -int ieee80211_tx_frame(struct ieee80211_device *ieee, - struct ieee80211_hdr *frame, int hdr_len, int total_len, - int encrypt_mpdu) -{ - struct ieee80211_txb *txb = NULL; - unsigned long flags; - struct net_device_stats *stats = &ieee->stats; - struct sk_buff *skb_frag; - int priority = -1; - int fraglen = total_len; - int headroom = ieee->tx_headroom; - struct ieee80211_crypt_data *crypt = ieee->crypt[ieee->tx_keyidx]; - - spin_lock_irqsave(&ieee->lock, flags); - - if (encrypt_mpdu && (!ieee->sec.encrypt || !crypt)) - encrypt_mpdu = 0; - - /* If there is no driver handler to take the TXB, dont' bother - * creating it... */ - if (!ieee->hard_start_xmit) { - printk(KERN_WARNING "%s: No xmit handler.\n", ieee->dev->name); - goto success; - } - - if (unlikely(total_len < 24)) { - printk(KERN_WARNING "%s: skb too small (%d).\n", - ieee->dev->name, total_len); - goto success; - } - - if (encrypt_mpdu) { - frame->frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); - fraglen += crypt->ops->extra_mpdu_prefix_len + - crypt->ops->extra_mpdu_postfix_len; - headroom += crypt->ops->extra_mpdu_prefix_len; - } - - /* When we allocate the TXB we allocate enough space for the reserve - * and full fragment bytes (bytes_per_frag doesn't include prefix, - * postfix, header, FCS, etc.) */ - txb = ieee80211_alloc_txb(1, fraglen, headroom, GFP_ATOMIC); - if (unlikely(!txb)) { - printk(KERN_WARNING "%s: Could not allocate TXB\n", - ieee->dev->name); - goto failed; - } - txb->encrypted = 0; - txb->payload_size = fraglen; - - skb_frag = txb->fragments[0]; - - memcpy(skb_put(skb_frag, total_len), frame, total_len); - - if (ieee->config & - (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) - skb_put(skb_frag, 4); - - /* To avoid overcomplicating things, we do the corner-case frame - * encryption in software. The only real situation where encryption is - * needed here is during software-based shared key authentication. */ - if (encrypt_mpdu) - ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len); - - success: - spin_unlock_irqrestore(&ieee->lock, flags); - - if (txb) { - if ((*ieee->hard_start_xmit) (txb, ieee->dev, priority) == 0) { - stats->tx_packets++; - stats->tx_bytes += txb->payload_size; - return 0; - } - ieee80211_txb_free(txb); - } - return 0; - - failed: - spin_unlock_irqrestore(&ieee->lock, flags); - stats->tx_errors++; - return 1; -} - -EXPORT_SYMBOL(ieee80211_tx_frame); EXPORT_SYMBOL(ieee80211_txb_free); diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 623489afa62..822606b615c 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -744,98 +744,9 @@ int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, return 0; } -int ieee80211_wx_set_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct ieee80211_device *ieee = netdev_priv(dev); - unsigned long flags; - int err = 0; - - spin_lock_irqsave(&ieee->lock, flags); - - switch (wrqu->param.flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_KEY_MGMT: - /* - * Host AP driver does not use these parameters and allows - * wpa_supplicant to control them internally. - */ - break; - case IW_AUTH_TKIP_COUNTERMEASURES: - break; /* FIXME */ - case IW_AUTH_DROP_UNENCRYPTED: - ieee->drop_unencrypted = !!wrqu->param.value; - break; - case IW_AUTH_80211_AUTH_ALG: - break; /* FIXME */ - case IW_AUTH_WPA_ENABLED: - ieee->privacy_invoked = ieee->wpa_enabled = !!wrqu->param.value; - break; - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - ieee->ieee802_1x = !!wrqu->param.value; - break; - case IW_AUTH_PRIVACY_INVOKED: - ieee->privacy_invoked = !!wrqu->param.value; - break; - default: - err = -EOPNOTSUPP; - break; - } - spin_unlock_irqrestore(&ieee->lock, flags); - return err; -} - -int ieee80211_wx_get_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct ieee80211_device *ieee = netdev_priv(dev); - unsigned long flags; - int err = 0; - - spin_lock_irqsave(&ieee->lock, flags); - - switch (wrqu->param.flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_KEY_MGMT: - case IW_AUTH_TKIP_COUNTERMEASURES: /* FIXME */ - case IW_AUTH_80211_AUTH_ALG: /* FIXME */ - /* - * Host AP driver does not use these parameters and allows - * wpa_supplicant to control them internally. - */ - err = -EOPNOTSUPP; - break; - case IW_AUTH_DROP_UNENCRYPTED: - wrqu->param.value = ieee->drop_unencrypted; - break; - case IW_AUTH_WPA_ENABLED: - wrqu->param.value = ieee->wpa_enabled; - break; - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - wrqu->param.value = ieee->ieee802_1x; - break; - default: - err = -EOPNOTSUPP; - break; - } - spin_unlock_irqrestore(&ieee->lock, flags); - return err; -} - EXPORT_SYMBOL(ieee80211_wx_set_encodeext); EXPORT_SYMBOL(ieee80211_wx_get_encodeext); EXPORT_SYMBOL(ieee80211_wx_get_scan); EXPORT_SYMBOL(ieee80211_wx_set_encode); EXPORT_SYMBOL(ieee80211_wx_get_encode); - -EXPORT_SYMBOL_GPL(ieee80211_wx_set_auth); -EXPORT_SYMBOL_GPL(ieee80211_wx_get_auth); diff --git a/net/mac80211/aes_ccm.c b/net/mac80211/aes_ccm.c index 59f1691f62c..4d4c2dfcf9a 100644 --- a/net/mac80211/aes_ccm.c +++ b/net/mac80211/aes_ccm.c @@ -134,7 +134,7 @@ int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch, } -struct crypto_cipher * ieee80211_aes_key_setup_encrypt(const u8 key[]) +struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]) { struct crypto_cipher *tfm; diff --git a/net/mac80211/aes_ccm.h b/net/mac80211/aes_ccm.h index 885f19030b2..8cd0f14aab4 100644 --- a/net/mac80211/aes_ccm.h +++ b/net/mac80211/aes_ccm.h @@ -14,7 +14,7 @@ #define AES_BLOCK_LEN 16 -struct crypto_cipher * ieee80211_aes_key_setup_encrypt(const u8 key[]); +struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]); void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch, u8 *b_0, u8 *aad, u8 *data, size_t data_len, u8 *cdata, u8 *mic); diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 1cccbfd781f..d20d90eead1 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -197,45 +197,6 @@ DEBUGFS_STATS_FILE(rx_handlers_fragments, 20, "%u", DEBUGFS_STATS_FILE(tx_status_drop, 20, "%u", local->tx_status_drop); -static ssize_t stats_wme_rx_queue_read(struct file *file, - char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct ieee80211_local *local = file->private_data; - char buf[NUM_RX_DATA_QUEUES*15], *p = buf; - int i; - - for (i = 0; i < NUM_RX_DATA_QUEUES; i++) - p += scnprintf(p, sizeof(buf)+buf-p, - "%u\n", local->wme_rx_queue[i]); - - return simple_read_from_buffer(userbuf, count, ppos, buf, p-buf); -} - -static const struct file_operations stats_wme_rx_queue_ops = { - .read = stats_wme_rx_queue_read, - .open = mac80211_open_file_generic, -}; - -static ssize_t stats_wme_tx_queue_read(struct file *file, - char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct ieee80211_local *local = file->private_data; - char buf[NUM_TX_DATA_QUEUES*15], *p = buf; - int i; - - for (i = 0; i < NUM_TX_DATA_QUEUES; i++) - p += scnprintf(p, sizeof(buf)+buf-p, - "%u\n", local->wme_tx_queue[i]); - - return simple_read_from_buffer(userbuf, count, ppos, buf, p-buf); -} - -static const struct file_operations stats_wme_tx_queue_ops = { - .read = stats_wme_tx_queue_read, - .open = mac80211_open_file_generic, -}; #endif DEBUGFS_DEVSTATS_FILE(dot11ACKFailureCount); @@ -303,8 +264,6 @@ void debugfs_hw_add(struct ieee80211_local *local) DEBUGFS_STATS_ADD(rx_expand_skb_head2); DEBUGFS_STATS_ADD(rx_handlers_fragments); DEBUGFS_STATS_ADD(tx_status_drop); - DEBUGFS_STATS_ADD(wme_tx_queue); - DEBUGFS_STATS_ADD(wme_rx_queue); #endif DEBUGFS_STATS_ADD(dot11ACKFailureCount); DEBUGFS_STATS_ADD(dot11RTSFailureCount); @@ -356,8 +315,6 @@ void debugfs_hw_del(struct ieee80211_local *local) DEBUGFS_STATS_DEL(rx_expand_skb_head2); DEBUGFS_STATS_DEL(rx_handlers_fragments); DEBUGFS_STATS_DEL(tx_status_drop); - DEBUGFS_STATS_DEL(wme_tx_queue); - DEBUGFS_STATS_DEL(wme_rx_queue); #endif DEBUGFS_STATS_DEL(dot11ACKFailureCount); DEBUGFS_STATS_DEL(dot11RTSFailureCount); diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index e3326d04694..3ae5493d728 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -528,7 +528,7 @@ void ieee80211_debugfs_change_if_type(struct ieee80211_sub_if_data *sdata, add_files(sdata); } -static int netdev_notify(struct notifier_block * nb, +static int netdev_notify(struct notifier_block *nb, unsigned long state, void *ndev) { diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 6d47a1d31b3..676a93202ff 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -123,36 +123,6 @@ static ssize_t sta_last_seq_ctrl_read(struct file *file, char __user *userbuf, } STA_OPS(last_seq_ctrl); -#ifdef CONFIG_MAC80211_DEBUG_COUNTERS -static ssize_t sta_wme_rx_queue_read(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - char buf[15*NUM_RX_DATA_QUEUES], *p = buf; - int i; - struct sta_info *sta = file->private_data; - for (i = 0; i < NUM_RX_DATA_QUEUES; i++) - p += scnprintf(p, sizeof(buf)+buf-p, "%u ", - sta->wme_rx_queue[i]); - p += scnprintf(p, sizeof(buf)+buf-p, "\n"); - return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); -} -STA_OPS(wme_rx_queue); - -static ssize_t sta_wme_tx_queue_read(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - char buf[15*NUM_TX_DATA_QUEUES], *p = buf; - int i; - struct sta_info *sta = file->private_data; - for (i = 0; i < NUM_TX_DATA_QUEUES; i++) - p += scnprintf(p, sizeof(buf)+buf-p, "%u ", - sta->wme_tx_queue[i]); - p += scnprintf(p, sizeof(buf)+buf-p, "\n"); - return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); -} -STA_OPS(wme_tx_queue); -#endif - static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { @@ -293,10 +263,6 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta) DEBUGFS_ADD(num_ps_buf_frames); DEBUGFS_ADD(inactive_ms); DEBUGFS_ADD(last_seq_ctrl); -#ifdef CONFIG_MAC80211_DEBUG_COUNTERS - DEBUGFS_ADD(wme_rx_queue); - DEBUGFS_ADD(wme_tx_queue); -#endif DEBUGFS_ADD(agg_status); } @@ -306,10 +272,6 @@ void ieee80211_sta_debugfs_remove(struct sta_info *sta) DEBUGFS_DEL(num_ps_buf_frames); DEBUGFS_DEL(inactive_ms); DEBUGFS_DEL(last_seq_ctrl); -#ifdef CONFIG_MAC80211_DEBUG_COUNTERS - DEBUGFS_DEL(wme_rx_queue); - DEBUGFS_DEL(wme_tx_queue); -#endif DEBUGFS_DEL(agg_status); debugfs_remove(sta->debugfs.dir); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c7314bf4bec..d82ed20a344 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -610,8 +610,8 @@ struct ieee80211_local { struct sta_info *sta_hash[STA_HASH_SIZE]; struct timer_list sta_cleanup; - unsigned long state[NUM_TX_DATA_QUEUES_AMPDU]; - struct ieee80211_tx_stored_packet pending_packet[NUM_TX_DATA_QUEUES_AMPDU]; + unsigned long state[IEEE80211_MAX_AMPDU_QUEUES + IEEE80211_MAX_AMPDU_QUEUES]; + struct ieee80211_tx_stored_packet pending_packet[IEEE80211_MAX_AMPDU_QUEUES + IEEE80211_MAX_AMPDU_QUEUES]; struct tasklet_struct tx_pending_tasklet; /* number of interfaces with corresponding IFF_ flags */ @@ -705,8 +705,6 @@ struct ieee80211_local { unsigned int rx_expand_skb_head2; unsigned int rx_handlers_fragments; unsigned int tx_status_drop; - unsigned int wme_rx_queue[NUM_RX_DATA_QUEUES]; - unsigned int wme_tx_queue[NUM_RX_DATA_QUEUES]; #define I802_DEBUG_INC(c) (c)++ #else /* CONFIG_MAC80211_DEBUG_COUNTERS */ #define I802_DEBUG_INC(c) do { } while (0) @@ -764,8 +762,6 @@ struct ieee80211_local { struct dentry *rx_expand_skb_head2; struct dentry *rx_handlers_fragments; struct dentry *tx_status_drop; - struct dentry *wme_tx_queue; - struct dentry *wme_rx_queue; #endif struct dentry *dot11ACKFailureCount; struct dentry *dot11RTSFailureCount; @@ -919,9 +915,9 @@ ieee80211_rx_result ieee80211_sta_rx_scan( void ieee80211_rx_bss_list_init(struct net_device *dev); void ieee80211_rx_bss_list_deinit(struct net_device *dev); int ieee80211_sta_set_extra_ie(struct net_device *dev, char *ie, size_t len); -struct sta_info * ieee80211_ibss_add_sta(struct net_device *dev, - struct sk_buff *skb, u8 *bssid, - u8 *addr); +struct sta_info *ieee80211_ibss_add_sta(struct net_device *dev, + struct sk_buff *skb, u8 *bssid, + u8 *addr); int ieee80211_sta_deauthenticate(struct net_device *dev, u16 reason); int ieee80211_sta_disassociate(struct net_device *dev, u16 reason); void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, @@ -940,7 +936,6 @@ void ieee80211_send_delba(struct net_device *dev, const u8 *da, u16 tid, void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *da, u16 tid, u16 initiator, u16 reason); -void sta_rx_agg_session_timer_expired(unsigned long data); void sta_addba_resp_timer_expired(unsigned long data); void ieee80211_sta_tear_down_BA_sessions(struct net_device *dev, u8 *addr); u64 ieee80211_sta_get_rates(struct ieee80211_local *local, diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 06e88a5a036..4a8062f8b1c 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -33,9 +33,8 @@ static void ieee80211_if_sdata_deinit(struct ieee80211_sub_if_data *sdata) { int i; - for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) { + for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) __skb_queue_purge(&sdata->fragments[i].skb_list); - } } /* Must be called with rtnl lock held. */ diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 150d66dbda9..88b211af7c1 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -323,6 +323,13 @@ void ieee80211_key_link(struct ieee80211_key *key, */ if (sta->flags & WLAN_STA_WME) key->conf.flags |= IEEE80211_KEY_FLAG_WMM_STA; + + /* + * This key is for a specific sta interface, + * inform the driver that it should try to store + * this key as pairwise key. + */ + key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE; } else { if (sdata->vif.type == IEEE80211_IF_TYPE_STA) { struct sta_info *ap; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 915afadb060..eb347eca30b 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -385,8 +385,8 @@ static int ieee80211_open(struct net_device *dev) * yet be effective. Trigger execution of ieee80211_sta_work * to fix this. */ - if(sdata->vif.type == IEEE80211_IF_TYPE_STA || - sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { + if (sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { struct ieee80211_if_sta *ifsta = &sdata->u.sta; queue_work(local->hw.workqueue, &ifsta->work); } @@ -1482,7 +1482,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, return; } - rthdr = (struct ieee80211_tx_status_rtap_hdr*) + rthdr = (struct ieee80211_tx_status_rtap_hdr *) skb_push(skb, sizeof(*rthdr)); memset(rthdr, 0, sizeof(*rthdr)); @@ -1745,6 +1745,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_wep; } + if (hw->queues > IEEE80211_MAX_QUEUES) + hw->queues = IEEE80211_MAX_QUEUES; + if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES) + hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES; + ieee80211_install_qdisc(local->mdev); /* add one default STA interface */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4adba09e80c..5d7719f44be 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -87,6 +87,7 @@ static int ieee80211_sta_start_scan(struct net_device *dev, u8 *ssid, size_t ssid_len); static int ieee80211_sta_config_auth(struct net_device *dev, struct ieee80211_if_sta *ifsta); +static void sta_rx_agg_session_timer_expired(unsigned long data); void ieee802_11_parse_elems(u8 *start, size_t len, @@ -256,19 +257,8 @@ static void ieee80211_sta_def_wmm_params(struct net_device *dev, qparam.cw_max = 1023; qparam.txop = 0; - for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++) - local->ops->conf_tx(local_to_hw(local), - i + IEEE80211_TX_QUEUE_DATA0, - &qparam); - - if (ibss) { - /* IBSS uses different parameters for Beacon sending */ - qparam.cw_min++; - qparam.cw_min *= 2; - qparam.cw_min--; - local->ops->conf_tx(local_to_hw(local), - IEEE80211_TX_QUEUE_BEACON, &qparam); - } + for (i = 0; i < local_to_hw(local)->queues; i++) + local->ops->conf_tx(local_to_hw(local), i, &qparam); } } @@ -305,29 +295,25 @@ static void ieee80211_sta_wmm_params(struct net_device *dev, switch (aci) { case 1: - queue = IEEE80211_TX_QUEUE_DATA3; - if (acm) { + queue = 3; + if (acm) local->wmm_acm |= BIT(0) | BIT(3); - } break; case 2: - queue = IEEE80211_TX_QUEUE_DATA1; - if (acm) { + queue = 1; + if (acm) local->wmm_acm |= BIT(4) | BIT(5); - } break; case 3: - queue = IEEE80211_TX_QUEUE_DATA0; - if (acm) { + queue = 0; + if (acm) local->wmm_acm |= BIT(6) | BIT(7); - } break; case 0: default: - queue = IEEE80211_TX_QUEUE_DATA2; - if (acm) { + queue = 2; + if (acm) local->wmm_acm |= BIT(1) | BIT(2); - } break; } @@ -727,9 +713,8 @@ static void ieee80211_send_assoc(struct net_device *dev, if (bss) { if (bss->capability & WLAN_CAPABILITY_PRIVACY) capab |= WLAN_CAPABILITY_PRIVACY; - if (bss->wmm_ie) { + if (bss->wmm_ie) wmm = 1; - } ieee80211_rx_bss_put(dev, bss); } @@ -1134,8 +1119,8 @@ static void ieee80211_send_addba_resp(struct net_device *dev, u8 *da, u16 tid, struct ieee80211_mgmt *mgmt; u16 capab; - skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 + - sizeof(mgmt->u.action.u.addba_resp)); + skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom); + if (!skb) { printk(KERN_DEBUG "%s: failed to allocate buffer " "for addba resp frame\n", dev->name); @@ -1183,9 +1168,7 @@ void ieee80211_send_addba_request(struct net_device *dev, const u8 *da, struct ieee80211_mgmt *mgmt; u16 capab; - skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 + - sizeof(mgmt->u.action.u.addba_req)); - + skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom); if (!skb) { printk(KERN_ERR "%s: failed to allocate buffer " @@ -1447,8 +1430,7 @@ void ieee80211_send_delba(struct net_device *dev, const u8 *da, u16 tid, struct ieee80211_mgmt *mgmt; u16 params; - skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 + - sizeof(mgmt->u.action.u.delba)); + skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom); if (!skb) { printk(KERN_ERR "%s: failed to allocate buffer " @@ -1652,7 +1634,7 @@ timer_expired_exit: * resetting it after each frame that arrives from the originator. * if this timer expires ieee80211_sta_stop_rx_ba_session will be executed. */ -void sta_rx_agg_session_timer_expired(unsigned long data) +static void sta_rx_agg_session_timer_expired(unsigned long data) { /* not an elegant detour, but there is no choice as the timer passes * only one argument, and verious sta_info are needed here, so init @@ -1841,9 +1823,8 @@ static void ieee80211_rx_mgmt_deauth(struct net_device *dev, " (reason=%d)\n", dev->name, print_mac(mac, mgmt->sa), reason_code); - if (ifsta->flags & IEEE80211_STA_AUTHENTICATED) { + if (ifsta->flags & IEEE80211_STA_AUTHENTICATED) printk(KERN_DEBUG "%s: deauthenticated\n", dev->name); - } if (ifsta->state == IEEE80211_AUTHENTICATE || ifsta->state == IEEE80211_ASSOCIATE || @@ -3553,10 +3534,12 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, bss->beacon_int = local->hw.conf.beacon_int; bss->last_update = jiffies; bss->capability = WLAN_CAPABILITY_IBSS; - if (sdata->default_key) { + + if (sdata->default_key) bss->capability |= WLAN_CAPABILITY_PRIVACY; - } else + else sdata->drop_unencrypted = 0; + bss->supp_rates_len = sband->n_bitrates; pos = bss->supp_rates; for (i = 0; i < sband->n_bitrates; i++) { @@ -4239,6 +4222,7 @@ int ieee80211_sta_set_extra_ie(struct net_device *dev, char *ie, size_t len) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_if_sta *ifsta = &sdata->u.sta; + kfree(ifsta->extra_ie); if (len == 0) { ifsta->extra_ie = NULL; @@ -4256,9 +4240,9 @@ int ieee80211_sta_set_extra_ie(struct net_device *dev, char *ie, size_t len) } -struct sta_info * ieee80211_ibss_add_sta(struct net_device *dev, - struct sk_buff *skb, u8 *bssid, - u8 *addr) +struct sta_info *ieee80211_ibss_add_sta(struct net_device *dev, + struct sk_buff *skb, u8 *bssid, + u8 *addr) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct sta_info *sta; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1958bfb361c..9b5a3cbec26 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -275,11 +275,6 @@ static void ieee80211_parse_qos(struct ieee80211_rx_data *rx) } } - I802_DEBUG_INC(rx->local->wme_rx_queue[tid]); - /* only a debug counter, sta might not be assigned properly yet */ - if (rx->sta) - I802_DEBUG_INC(rx->sta->wme_rx_queue[tid]); - rx->queue = tid; /* Set skb->priority to 1d tag if highest order bit of TID is not set. * For now, set skb->priority to 0 for other cases. */ diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 7d4fe4a5292..631943e8af8 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -257,7 +257,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, * sta_rx_agg_session_timer_expired for useage */ sta->timer_to_tid[i] = i; /* tid to tx queue: initialize according to HW (0 is valid) */ - sta->tid_to_tx_q[i] = local->hw.queues; + sta->tid_to_tx_q[i] = local->hw.queues + local->hw.ampdu_queues; /* rx */ sta->ampdu_mlme.tid_state_rx[i] = HT_AGG_STATE_IDLE; sta->ampdu_mlme.tid_rx[i] = NULL; diff --git a/net/mac80211/tkip.h b/net/mac80211/tkip.h index b7c2ee763d9..1fa0bb4dba3 100644 --- a/net/mac80211/tkip.h +++ b/net/mac80211/tkip.h @@ -13,8 +13,8 @@ #include <linux/crypto.h> #include "key.h" -u8 * ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key, - u8 iv0, u8 iv1, u8 iv2); +u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key *key, + u8 iv0, u8 iv1, u8 iv2); void ieee80211_tkip_gen_phase1key(struct ieee80211_key *key, u8 *ta, u16 *phase1key); void ieee80211_tkip_gen_rc4key(struct ieee80211_key *key, u8 *ta, diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index affcecd78c1..3cbae42ec50 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -337,7 +337,7 @@ static int wep_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) if (ieee80211_wep_encrypt(tx->local, skb, tx->key)) return -1; } else { - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf; if (tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) { if (!ieee80211_wep_add_iv(tx->local, skb, tx->key)) return -1; diff --git a/net/mac80211/wep.h b/net/mac80211/wep.h index 363779c5065..e587172115b 100644 --- a/net/mac80211/wep.h +++ b/net/mac80211/wep.h @@ -26,7 +26,7 @@ int ieee80211_wep_encrypt(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_key *key); int ieee80211_wep_decrypt(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_key *key); -u8 * ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key); +u8 *ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key); ieee80211_rx_result ieee80211_crypto_wep_decrypt(struct ieee80211_rx_data *rx); diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index dc1598b8600..c87baf4ce97 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -19,16 +19,22 @@ #include "wme.h" /* maximum number of hardware queues we support. */ -#define TC_80211_MAX_QUEUES 16 +#define QD_MAX_QUEUES (IEEE80211_MAX_AMPDU_QUEUES + IEEE80211_MAX_QUEUES) +/* current number of hardware queues we support. */ +#define QD_NUM(hw) ((hw)->queues + (hw)->ampdu_queues) +/* + * Default mapping in classifier to work with default + * queue setup. + */ const int ieee802_1d_to_ac[8] = { 2, 3, 3, 2, 1, 1, 0, 0 }; struct ieee80211_sched_data { - unsigned long qdisc_pool[BITS_TO_LONGS(TC_80211_MAX_QUEUES)]; + unsigned long qdisc_pool[BITS_TO_LONGS(QD_MAX_QUEUES)]; struct tcf_proto *filter_list; - struct Qdisc *queues[TC_80211_MAX_QUEUES]; - struct sk_buff_head requeued[TC_80211_MAX_QUEUES]; + struct Qdisc *queues[QD_MAX_QUEUES]; + struct sk_buff_head requeued[QD_MAX_QUEUES]; }; static const char llc_ip_hdr[8] = {0xAA, 0xAA, 0x3, 0, 0, 0, 0x08, 0}; @@ -95,7 +101,7 @@ static inline int wme_downgrade_ac(struct sk_buff *skb) /* positive return value indicates which queue to use * negative return value indicates to drop the frame */ -static inline int classify80211(struct sk_buff *skb, struct Qdisc *qd) +static int classify80211(struct sk_buff *skb, struct Qdisc *qd) { struct ieee80211_local *local = wdev_priv(qd->dev->ieee80211_ptr); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; @@ -106,7 +112,7 @@ static inline int classify80211(struct sk_buff *skb, struct Qdisc *qd) if (unlikely((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA)) { /* management frames go on AC_VO queue, but are sent * without QoS control fields */ - return IEEE80211_TX_QUEUE_DATA0; + return 0; } if (0 /* injected */) { @@ -141,14 +147,15 @@ static inline int classify80211(struct sk_buff *skb, struct Qdisc *qd) static int wme_qdiscop_enqueue(struct sk_buff *skb, struct Qdisc* qd) { struct ieee80211_local *local = wdev_priv(qd->dev->ieee80211_ptr); + struct ieee80211_hw *hw = &local->hw; struct ieee80211_sched_data *q = qdisc_priv(qd); struct ieee80211_tx_packet_data *pkt_data = (struct ieee80211_tx_packet_data *) skb->cb; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; unsigned short fc = le16_to_cpu(hdr->frame_control); struct Qdisc *qdisc; - int err, queue; struct sta_info *sta; + int err, queue; u8 tid; if (pkt_data->flags & IEEE80211_TXPD_REQUEUE) { @@ -158,7 +165,7 @@ static int wme_qdiscop_enqueue(struct sk_buff *skb, struct Qdisc* qd) tid = skb->priority & QOS_CONTROL_TAG1D_MASK; if (sta) { int ampdu_queue = sta->tid_to_tx_q[tid]; - if ((ampdu_queue < local->hw.queues) && + if ((ampdu_queue < QD_NUM(hw)) && test_bit(ampdu_queue, q->qdisc_pool)) { queue = ampdu_queue; pkt_data->flags |= IEEE80211_TXPD_AMPDU; @@ -174,6 +181,9 @@ static int wme_qdiscop_enqueue(struct sk_buff *skb, struct Qdisc* qd) queue = classify80211(skb, qd); + if (unlikely(queue >= local->hw.queues)) + queue = local->hw.queues - 1; + /* now we know the 1d priority, fill in the QoS header if there is one */ if (WLAN_FC_IS_QOS_DATA(fc)) { @@ -193,8 +203,8 @@ static int wme_qdiscop_enqueue(struct sk_buff *skb, struct Qdisc* qd) sta = sta_info_get(local, hdr->addr1); if (sta) { int ampdu_queue = sta->tid_to_tx_q[tid]; - if ((ampdu_queue < local->hw.queues) && - test_bit(ampdu_queue, q->qdisc_pool)) { + if ((ampdu_queue < QD_NUM(hw)) && + test_bit(ampdu_queue, q->qdisc_pool)) { queue = ampdu_queue; pkt_data->flags |= IEEE80211_TXPD_AMPDU; } else { @@ -205,17 +215,6 @@ static int wme_qdiscop_enqueue(struct sk_buff *skb, struct Qdisc* qd) rcu_read_unlock(); } - if (unlikely(queue >= local->hw.queues)) { -#if 0 - if (net_ratelimit()) { - printk(KERN_DEBUG "%s - queue=%d (hw does not " - "support) -> %d\n", - __func__, queue, local->hw.queues - 1); - } -#endif - queue = local->hw.queues - 1; - } - if (unlikely(queue < 0)) { kfree_skb(skb); err = NET_XMIT_DROP; @@ -270,7 +269,7 @@ static struct sk_buff *wme_qdiscop_dequeue(struct Qdisc* qd) int queue; /* check all the h/w queues in numeric/priority order */ - for (queue = 0; queue < hw->queues; queue++) { + for (queue = 0; queue < QD_NUM(hw); queue++) { /* see if there is room in this hardware queue */ if ((test_bit(IEEE80211_LINK_STATE_XOFF, &local->state[queue])) || @@ -308,7 +307,7 @@ static void wme_qdiscop_reset(struct Qdisc* qd) /* QUESTION: should we have some hardware flush functionality here? */ - for (queue = 0; queue < hw->queues; queue++) { + for (queue = 0; queue < QD_NUM(hw); queue++) { skb_queue_purge(&q->requeued[queue]); qdisc_reset(q->queues[queue]); } @@ -326,7 +325,7 @@ static void wme_qdiscop_destroy(struct Qdisc* qd) tcf_destroy_chain(q->filter_list); q->filter_list = NULL; - for (queue=0; queue < hw->queues; queue++) { + for (queue = 0; queue < QD_NUM(hw); queue++) { skb_queue_purge(&q->requeued[queue]); qdisc_destroy(q->queues[queue]); q->queues[queue] = &noop_qdisc; @@ -337,17 +336,6 @@ static void wme_qdiscop_destroy(struct Qdisc* qd) /* called whenever parameters are updated on existing qdisc */ static int wme_qdiscop_tune(struct Qdisc *qd, struct nlattr *opt) { -/* struct ieee80211_sched_data *q = qdisc_priv(qd); -*/ - /* check our options block is the right size */ - /* copy any options to our local structure */ -/* Ignore options block for now - always use static mapping - struct tc_ieee80211_qopt *qopt = nla_data(opt); - - if (opt->nla_len < nla_attr_size(sizeof(*qopt))) - return -EINVAL; - memcpy(q->tag2queue, qopt->tag2queue, sizeof(qopt->tag2queue)); -*/ return 0; } @@ -358,7 +346,7 @@ static int wme_qdiscop_init(struct Qdisc *qd, struct nlattr *opt) struct ieee80211_sched_data *q = qdisc_priv(qd); struct net_device *dev = qd->dev; struct ieee80211_local *local; - int queues; + struct ieee80211_hw *hw; int err = 0, i; /* check that device is a mac80211 device */ @@ -366,29 +354,26 @@ static int wme_qdiscop_init(struct Qdisc *qd, struct nlattr *opt) dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid) return -EINVAL; - /* check this device is an ieee80211 master type device */ - if (dev->type != ARPHRD_IEEE80211) + local = wdev_priv(dev->ieee80211_ptr); + hw = &local->hw; + + /* only allow on master dev */ + if (dev != local->mdev) return -EINVAL; - /* check that there is no qdisc currently attached to device - * this ensures that we will be the root qdisc. (I can't find a better - * way to test this explicitly) */ - if (dev->qdisc_sleeping != &noop_qdisc) + /* ensure that we are root qdisc */ + if (qd->parent != TC_H_ROOT) return -EINVAL; if (qd->flags & TCQ_F_INGRESS) return -EINVAL; - local = wdev_priv(dev->ieee80211_ptr); - queues = local->hw.queues; - /* if options were passed in, set them */ - if (opt) { + if (opt) err = wme_qdiscop_tune(qd, opt); - } /* create child queues */ - for (i = 0; i < queues; i++) { + for (i = 0; i < QD_NUM(hw); i++) { skb_queue_head_init(&q->requeued[i]); q->queues[i] = qdisc_create_dflt(qd->dev, &pfifo_qdisc_ops, qd->handle); @@ -399,8 +384,8 @@ static int wme_qdiscop_init(struct Qdisc *qd, struct nlattr *opt) } } - /* reserve all legacy QoS queues */ - for (i = 0; i < min(IEEE80211_TX_QUEUE_DATA4, queues); i++) + /* non-aggregation queues: reserve/mark as used */ + for (i = 0; i < local->hw.queues; i++) set_bit(i, q->qdisc_pool); return err; @@ -408,16 +393,6 @@ static int wme_qdiscop_init(struct Qdisc *qd, struct nlattr *opt) static int wme_qdiscop_dump(struct Qdisc *qd, struct sk_buff *skb) { -/* struct ieee80211_sched_data *q = qdisc_priv(qd); - unsigned char *p = skb->tail; - struct tc_ieee80211_qopt opt; - - memcpy(&opt.tag2queue, q->tag2queue, TC_80211_MAX_TAG + 1); - NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt); -*/ return skb->len; -/* -nla_put_failure: - skb_trim(skb, p - skb->data);*/ return -1; } @@ -430,7 +405,7 @@ static int wme_classop_graft(struct Qdisc *qd, unsigned long arg, struct ieee80211_hw *hw = &local->hw; unsigned long queue = arg - 1; - if (queue >= hw->queues) + if (queue >= QD_NUM(hw)) return -EINVAL; if (!new) @@ -454,7 +429,7 @@ wme_classop_leaf(struct Qdisc *qd, unsigned long arg) struct ieee80211_hw *hw = &local->hw; unsigned long queue = arg - 1; - if (queue >= hw->queues) + if (queue >= QD_NUM(hw)) return NULL; return q->queues[queue]; @@ -467,7 +442,7 @@ static unsigned long wme_classop_get(struct Qdisc *qd, u32 classid) struct ieee80211_hw *hw = &local->hw; unsigned long queue = TC_H_MIN(classid); - if (queue - 1 >= hw->queues) + if (queue - 1 >= QD_NUM(hw)) return 0; return queue; @@ -493,7 +468,7 @@ static int wme_classop_change(struct Qdisc *qd, u32 handle, u32 parent, struct ieee80211_local *local = wdev_priv(qd->dev->ieee80211_ptr); struct ieee80211_hw *hw = &local->hw; - if (cl - 1 > hw->queues) + if (cl - 1 > QD_NUM(hw)) return -ENOENT; /* TODO: put code to program hardware queue parameters here, @@ -510,7 +485,7 @@ static int wme_classop_delete(struct Qdisc *qd, unsigned long cl) struct ieee80211_local *local = wdev_priv(qd->dev->ieee80211_ptr); struct ieee80211_hw *hw = &local->hw; - if (cl - 1 > hw->queues) + if (cl - 1 > QD_NUM(hw)) return -ENOENT; return 0; } @@ -523,7 +498,7 @@ static int wme_classop_dump_class(struct Qdisc *qd, unsigned long cl, struct ieee80211_local *local = wdev_priv(qd->dev->ieee80211_ptr); struct ieee80211_hw *hw = &local->hw; - if (cl - 1 > hw->queues) + if (cl - 1 > QD_NUM(hw)) return -ENOENT; tcm->tcm_handle = TC_H_MIN(cl); tcm->tcm_parent = qd->handle; @@ -541,7 +516,7 @@ static void wme_classop_walk(struct Qdisc *qd, struct qdisc_walker *arg) if (arg->stop) return; - for (queue = 0; queue < hw->queues; queue++) { + for (queue = 0; queue < QD_NUM(hw); queue++) { if (arg->count < arg->skip) { arg->count++; continue; @@ -658,10 +633,13 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, DECLARE_MAC_BUF(mac); /* prepare the filter and save it for the SW queue - * matching the recieved HW queue */ + * matching the received HW queue */ + + if (!local->hw.ampdu_queues) + return -EPERM; /* try to get a Qdisc from the pool */ - for (i = IEEE80211_TX_QUEUE_BEACON; i < local->hw.queues; i++) + for (i = local->hw.queues; i < QD_NUM(&local->hw); i++) if (!test_and_set_bit(i, q->qdisc_pool)) { ieee80211_stop_queue(local_to_hw(local), i); sta->tid_to_tx_q[tid] = i; @@ -690,13 +668,14 @@ void ieee80211_ht_agg_queue_remove(struct ieee80211_local *local, struct sta_info *sta, u16 tid, u8 requeue) { + struct ieee80211_hw *hw = &local->hw; struct ieee80211_sched_data *q = qdisc_priv(local->mdev->qdisc_sleeping); int agg_queue = sta->tid_to_tx_q[tid]; /* return the qdisc to the pool */ clear_bit(agg_queue, q->qdisc_pool); - sta->tid_to_tx_q[tid] = local->hw.queues; + sta->tid_to_tx_q[tid] = QD_NUM(hw); if (requeue) ieee80211_requeue(local, agg_queue); diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index 45709ada8fe..42f3654e1c5 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -228,7 +228,7 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, 0x7f), (u8) key->u.tkip.iv16); - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf; return 0; } @@ -256,7 +256,7 @@ ieee80211_crypto_tkip_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) && !wpa_test) { /* hwaccel - with no need for preallocated room for IV/ICV */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf; return TX_CONTINUE; } @@ -478,7 +478,7 @@ static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) { /* hwaccel - with preallocated room for CCMP header */ - tx->control->key_idx = key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf; return 0; } @@ -505,7 +505,7 @@ ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) { /* hwaccel - with no need for preallocated room for CCMP " * header or MIC fields */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf; return TX_CONTINUE; } diff --git a/net/sctp/associola.c b/net/sctp/associola.c index b4cd2b71953..7b79d1e781a 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -136,6 +136,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a /* Set association default SACK delay */ asoc->sackdelay = msecs_to_jiffies(sp->sackdelay); + asoc->sackfreq = sp->sackfreq; /* Set the association default flags controlling * Heartbeat, SACK delay, and Path MTU Discovery. @@ -261,6 +262,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a * already received one packet.] */ asoc->peer.sack_needed = 1; + asoc->peer.sack_cnt = 0; /* Assume that the peer will tell us if he recognizes ASCONF * as part of INIT exchange. @@ -615,6 +617,7 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, * association configured value. */ peer->sackdelay = asoc->sackdelay; + peer->sackfreq = asoc->sackfreq; /* Enable/disable heartbeat, SACK delay, and path MTU discovery * based on association setting. diff --git a/net/sctp/proc.c b/net/sctp/proc.c index 0aba759cb9b..5dd89831ece 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -383,3 +383,144 @@ void sctp_assocs_proc_exit(void) { remove_proc_entry("assocs", proc_net_sctp); } + +static void *sctp_remaddr_seq_start(struct seq_file *seq, loff_t *pos) +{ + if (*pos >= sctp_assoc_hashsize) + return NULL; + + if (*pos < 0) + *pos = 0; + + if (*pos == 0) + seq_printf(seq, "ADDR ASSOC_ID HB_ACT RTO MAX_PATH_RTX " + "REM_ADDR_RTX START\n"); + + return (void *)pos; +} + +static void *sctp_remaddr_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + if (++*pos >= sctp_assoc_hashsize) + return NULL; + + return pos; +} + +static void sctp_remaddr_seq_stop(struct seq_file *seq, void *v) +{ + return; +} + +static int sctp_remaddr_seq_show(struct seq_file *seq, void *v) +{ + struct sctp_hashbucket *head; + struct sctp_ep_common *epb; + struct sctp_association *assoc; + struct hlist_node *node; + struct sctp_transport *tsp; + int hash = *(loff_t *)v; + + if (hash >= sctp_assoc_hashsize) + return -ENOMEM; + + head = &sctp_assoc_hashtable[hash]; + sctp_local_bh_disable(); + read_lock(&head->lock); + sctp_for_each_hentry(epb, node, &head->chain) { + assoc = sctp_assoc(epb); + list_for_each_entry(tsp, &assoc->peer.transport_addr_list, + transports) { + /* + * The remote address (ADDR) + */ + tsp->af_specific->seq_dump_addr(seq, &tsp->ipaddr); + seq_printf(seq, " "); + + /* + * The association ID (ASSOC_ID) + */ + seq_printf(seq, "%d ", tsp->asoc->assoc_id); + + /* + * If the Heartbeat is active (HB_ACT) + * Note: 1 = Active, 0 = Inactive + */ + seq_printf(seq, "%d ", timer_pending(&tsp->hb_timer)); + + /* + * Retransmit time out (RTO) + */ + seq_printf(seq, "%lu ", tsp->rto); + + /* + * Maximum path retransmit count (PATH_MAX_RTX) + */ + seq_printf(seq, "%d ", tsp->pathmaxrxt); + + /* + * remote address retransmit count (REM_ADDR_RTX) + * Note: We don't have a way to tally this at the moment + * so lets just leave it as zero for the moment + */ + seq_printf(seq, "0 "); + + /* + * remote address start time (START). This is also not + * currently implemented, but we can record it with a + * jiffies marker in a subsequent patch + */ + seq_printf(seq, "0"); + + seq_printf(seq, "\n"); + } + } + + read_unlock(&head->lock); + sctp_local_bh_enable(); + + return 0; + +} + +static const struct seq_operations sctp_remaddr_ops = { + .start = sctp_remaddr_seq_start, + .next = sctp_remaddr_seq_next, + .stop = sctp_remaddr_seq_stop, + .show = sctp_remaddr_seq_show, +}; + +/* Cleanup the proc fs entry for 'remaddr' object. */ +void sctp_remaddr_proc_exit(void) +{ + remove_proc_entry("remaddr", proc_net_sctp); +} + +static int sctp_remaddr_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &sctp_remaddr_ops); +} + +static const struct file_operations sctp_remaddr_seq_fops = { + .open = sctp_remaddr_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +int __init sctp_remaddr_proc_init(void) +{ + struct proc_dir_entry *p; + + p = create_proc_entry("remaddr", S_IRUGO, proc_net_sctp); + if (!p) + return -ENOMEM; + p->proc_fops = &sctp_remaddr_seq_fops; + + return 0; +} + +void sctp_assoc_proc_exit(void) +{ + remove_proc_entry("remaddr", proc_net_sctp); +} diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 0ec234b762c..b8bd9e01449 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -113,6 +113,8 @@ static __init int sctp_proc_init(void) goto out_nomem; if (sctp_assocs_proc_init()) goto out_nomem; + if (sctp_remaddr_proc_init()) + goto out_nomem; return 0; @@ -129,6 +131,7 @@ static void sctp_proc_exit(void) sctp_snmp_proc_exit(); sctp_eps_proc_exit(); sctp_assocs_proc_exit(); + sctp_remaddr_proc_exit(); if (proc_net_sctp) { proc_net_sctp = NULL; diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 23a9f1a95b7..b083312c725 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -190,20 +190,28 @@ static int sctp_gen_sack(struct sctp_association *asoc, int force, * unacknowledged DATA chunk. ... */ if (!asoc->peer.sack_needed) { - /* We will need a SACK for the next packet. */ - asoc->peer.sack_needed = 1; + asoc->peer.sack_cnt++; /* Set the SACK delay timeout based on the * SACK delay for the last transport * data was received from, or the default * for the association. */ - if (trans) + if (trans) { + /* We will need a SACK for the next packet. */ + if (asoc->peer.sack_cnt >= trans->sackfreq - 1) + asoc->peer.sack_needed = 1; + asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = trans->sackdelay; - else + } else { + /* We will need a SACK for the next packet. */ + if (asoc->peer.sack_cnt >= asoc->sackfreq - 1) + asoc->peer.sack_needed = 1; + asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay; + } /* Restart the SACK timer. */ sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, @@ -216,6 +224,7 @@ static int sctp_gen_sack(struct sctp_association *asoc, int force, goto nomem; asoc->peer.sack_needed = 0; + asoc->peer.sack_cnt = 0; sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(sack)); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index e7e3baf7009..81600eea05d 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -956,7 +956,8 @@ out: */ static int __sctp_connect(struct sock* sk, struct sockaddr *kaddrs, - int addrs_size) + int addrs_size, + sctp_assoc_t *assoc_id) { struct sctp_sock *sp; struct sctp_endpoint *ep; @@ -1111,6 +1112,8 @@ static int __sctp_connect(struct sock* sk, timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK); err = sctp_wait_for_connect(asoc, &timeo); + if (!err && assoc_id) + *assoc_id = asoc->assoc_id; /* Don't free association on exit. */ asoc = NULL; @@ -1128,7 +1131,8 @@ out_free: /* Helper for tunneling sctp_connectx() requests through sctp_setsockopt() * * API 8.9 - * int sctp_connectx(int sd, struct sockaddr *addrs, int addrcnt); + * int sctp_connectx(int sd, struct sockaddr *addrs, int addrcnt, + * sctp_assoc_t *asoc); * * If sd is an IPv4 socket, the addresses passed must be IPv4 addresses. * If the sd is an IPv6 socket, the addresses passed can either be IPv4 @@ -1144,8 +1148,10 @@ out_free: * representation is termed a "packed array" of addresses). The caller * specifies the number of addresses in the array with addrcnt. * - * On success, sctp_connectx() returns 0. On failure, sctp_connectx() returns - * -1, and sets errno to the appropriate error code. + * On success, sctp_connectx() returns 0. It also sets the assoc_id to + * the association id of the new association. On failure, sctp_connectx() + * returns -1, and sets errno to the appropriate error code. The assoc_id + * is not touched by the kernel. * * For SCTP, the port given in each socket address must be the same, or * sctp_connectx() will fail, setting errno to EINVAL. @@ -1182,11 +1188,12 @@ out_free: * addrs The pointer to the addresses in user land * addrssize Size of the addrs buffer * - * Returns 0 if ok, <0 errno code on error. + * Returns >=0 if ok, <0 errno code on error. */ -SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk, +SCTP_STATIC int __sctp_setsockopt_connectx(struct sock* sk, struct sockaddr __user *addrs, - int addrs_size) + int addrs_size, + sctp_assoc_t *assoc_id) { int err = 0; struct sockaddr *kaddrs; @@ -1209,13 +1216,46 @@ SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk, if (__copy_from_user(kaddrs, addrs, addrs_size)) { err = -EFAULT; } else { - err = __sctp_connect(sk, kaddrs, addrs_size); + err = __sctp_connect(sk, kaddrs, addrs_size, assoc_id); } kfree(kaddrs); + return err; } +/* + * This is an older interface. It's kept for backward compatibility + * to the option that doesn't provide association id. + */ +SCTP_STATIC int sctp_setsockopt_connectx_old(struct sock* sk, + struct sockaddr __user *addrs, + int addrs_size) +{ + return __sctp_setsockopt_connectx(sk, addrs, addrs_size, NULL); +} + +/* + * New interface for the API. The since the API is done with a socket + * option, to make it simple we feed back the association id is as a return + * indication to the call. Error is always negative and association id is + * always positive. + */ +SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk, + struct sockaddr __user *addrs, + int addrs_size) +{ + sctp_assoc_t assoc_id = 0; + int err = 0; + + err = __sctp_setsockopt_connectx(sk, addrs, addrs_size, &assoc_id); + + if (err) + return err; + else + return assoc_id; +} + /* API 3.1.4 close() - UDP Style Syntax * Applications use close() to perform graceful shutdown (as described in * Section 10.1 of [SCTP]) on ALL the associations currently represented @@ -2305,74 +2345,98 @@ static int sctp_setsockopt_peer_addr_params(struct sock *sk, return 0; } -/* 7.1.23. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) - * - * This options will get or set the delayed ack timer. The time is set - * in milliseconds. If the assoc_id is 0, then this sets or gets the - * endpoints default delayed ack timer value. If the assoc_id field is - * non-zero, then the set or get effects the specified association. - * - * struct sctp_assoc_value { - * sctp_assoc_t assoc_id; - * uint32_t assoc_value; - * }; +/* + * 7.1.23. Get or set delayed ack timer (SCTP_DELAYED_SACK) + * + * This option will effect the way delayed acks are performed. This + * option allows you to get or set the delayed ack time, in + * milliseconds. It also allows changing the delayed ack frequency. + * Changing the frequency to 1 disables the delayed sack algorithm. If + * the assoc_id is 0, then this sets or gets the endpoints default + * values. If the assoc_id field is non-zero, then the set or get + * effects the specified association for the one to many model (the + * assoc_id field is ignored by the one to one model). Note that if + * sack_delay or sack_freq are 0 when setting this option, then the + * current values will remain unchanged. + * + * struct sctp_sack_info { + * sctp_assoc_t sack_assoc_id; + * uint32_t sack_delay; + * uint32_t sack_freq; + * }; * - * assoc_id - This parameter, indicates which association the - * user is preforming an action upon. Note that if - * this field's value is zero then the endpoints - * default value is changed (effecting future - * associations only). + * sack_assoc_id - This parameter, indicates which association the user + * is performing an action upon. Note that if this field's value is + * zero then the endpoints default value is changed (effecting future + * associations only). * - * assoc_value - This parameter contains the number of milliseconds - * that the user is requesting the delayed ACK timer - * be set to. Note that this value is defined in - * the standard to be between 200 and 500 milliseconds. + * sack_delay - This parameter contains the number of milliseconds that + * the user is requesting the delayed ACK timer be set to. Note that + * this value is defined in the standard to be between 200 and 500 + * milliseconds. * - * Note: a value of zero will leave the value alone, - * but disable SACK delay. A non-zero value will also - * enable SACK delay. + * sack_freq - This parameter contains the number of packets that must + * be received before a sack is sent without waiting for the delay + * timer to expire. The default value for this is 2, setting this + * value to 1 will disable the delayed sack algorithm. */ -static int sctp_setsockopt_delayed_ack_time(struct sock *sk, +static int sctp_setsockopt_delayed_ack(struct sock *sk, char __user *optval, int optlen) { - struct sctp_assoc_value params; + struct sctp_sack_info params; struct sctp_transport *trans = NULL; struct sctp_association *asoc = NULL; struct sctp_sock *sp = sctp_sk(sk); - if (optlen != sizeof(struct sctp_assoc_value)) - return - EINVAL; + if (optlen == sizeof(struct sctp_sack_info)) { + if (copy_from_user(¶ms, optval, optlen)) + return -EFAULT; - if (copy_from_user(¶ms, optval, optlen)) - return -EFAULT; + if (params.sack_delay == 0 && params.sack_freq == 0) + return 0; + } else if (optlen == sizeof(struct sctp_assoc_value)) { + printk(KERN_WARNING "SCTP: Use of struct sctp_sack_info " + "in delayed_ack socket option deprecated\n"); + printk(KERN_WARNING "SCTP: struct sctp_sack_info instead\n"); + if (copy_from_user(¶ms, optval, optlen)) + return -EFAULT; + + if (params.sack_delay == 0) + params.sack_freq = 1; + else + params.sack_freq = 0; + } else + return - EINVAL; /* Validate value parameter. */ - if (params.assoc_value > 500) + if (params.sack_delay > 500) return -EINVAL; - /* Get association, if assoc_id != 0 and the socket is a one + /* Get association, if sack_assoc_id != 0 and the socket is a one * to many style socket, and an association was not found, then * the id was invalid. */ - asoc = sctp_id2assoc(sk, params.assoc_id); - if (!asoc && params.assoc_id && sctp_style(sk, UDP)) + asoc = sctp_id2assoc(sk, params.sack_assoc_id); + if (!asoc && params.sack_assoc_id && sctp_style(sk, UDP)) return -EINVAL; - if (params.assoc_value) { + if (params.sack_delay) { if (asoc) { asoc->sackdelay = - msecs_to_jiffies(params.assoc_value); + msecs_to_jiffies(params.sack_delay); asoc->param_flags = (asoc->param_flags & ~SPP_SACKDELAY) | SPP_SACKDELAY_ENABLE; } else { - sp->sackdelay = params.assoc_value; + sp->sackdelay = params.sack_delay; sp->param_flags = (sp->param_flags & ~SPP_SACKDELAY) | SPP_SACKDELAY_ENABLE; } - } else { + } + + if (params.sack_freq == 1) { if (asoc) { asoc->param_flags = (asoc->param_flags & ~SPP_SACKDELAY) | @@ -2382,22 +2446,40 @@ static int sctp_setsockopt_delayed_ack_time(struct sock *sk, (sp->param_flags & ~SPP_SACKDELAY) | SPP_SACKDELAY_DISABLE; } + } else if (params.sack_freq > 1) { + if (asoc) { + asoc->sackfreq = params.sack_freq; + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } else { + sp->sackfreq = params.sack_freq; + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } } /* If change is for association, also apply to each transport. */ if (asoc) { list_for_each_entry(trans, &asoc->peer.transport_addr_list, transports) { - if (params.assoc_value) { + if (params.sack_delay) { trans->sackdelay = - msecs_to_jiffies(params.assoc_value); + msecs_to_jiffies(params.sack_delay); trans->param_flags = (trans->param_flags & ~SPP_SACKDELAY) | SPP_SACKDELAY_ENABLE; - } else { + } + if (params.sack_delay == 1) { trans->param_flags = (trans->param_flags & ~SPP_SACKDELAY) | SPP_SACKDELAY_DISABLE; + } else if (params.sack_freq > 1) { + trans->sackfreq = params.sack_freq; + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; } } } @@ -3164,10 +3246,18 @@ SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname, optlen, SCTP_BINDX_REM_ADDR); break; + case SCTP_SOCKOPT_CONNECTX_OLD: + /* 'optlen' is the size of the addresses buffer. */ + retval = sctp_setsockopt_connectx_old(sk, + (struct sockaddr __user *)optval, + optlen); + break; + case SCTP_SOCKOPT_CONNECTX: /* 'optlen' is the size of the addresses buffer. */ - retval = sctp_setsockopt_connectx(sk, (struct sockaddr __user *)optval, - optlen); + retval = sctp_setsockopt_connectx(sk, + (struct sockaddr __user *)optval, + optlen); break; case SCTP_DISABLE_FRAGMENTS: @@ -3186,8 +3276,8 @@ SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname, retval = sctp_setsockopt_peer_addr_params(sk, optval, optlen); break; - case SCTP_DELAYED_ACK_TIME: - retval = sctp_setsockopt_delayed_ack_time(sk, optval, optlen); + case SCTP_DELAYED_ACK: + retval = sctp_setsockopt_delayed_ack(sk, optval, optlen); break; case SCTP_PARTIAL_DELIVERY_POINT: retval = sctp_setsockopt_partial_delivery_point(sk, optval, optlen); @@ -3294,7 +3384,7 @@ SCTP_STATIC int sctp_connect(struct sock *sk, struct sockaddr *addr, /* Pass correct addr len to common routine (so it knows there * is only one address being passed. */ - err = __sctp_connect(sk, addr, af->sockaddr_len); + err = __sctp_connect(sk, addr, af->sockaddr_len, NULL); } sctp_release_sock(sk); @@ -3446,6 +3536,7 @@ SCTP_STATIC int sctp_init_sock(struct sock *sk) sp->pathmaxrxt = sctp_max_retrans_path; sp->pathmtu = 0; // allow default discovery sp->sackdelay = sctp_sack_timeout; + sp->sackfreq = 3; sp->param_flags = SPP_HB_ENABLE | SPP_PMTUD_ENABLE | SPP_SACKDELAY_ENABLE; @@ -3999,70 +4090,91 @@ static int sctp_getsockopt_peer_addr_params(struct sock *sk, int len, return 0; } -/* 7.1.23. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) - * - * This options will get or set the delayed ack timer. The time is set - * in milliseconds. If the assoc_id is 0, then this sets or gets the - * endpoints default delayed ack timer value. If the assoc_id field is - * non-zero, then the set or get effects the specified association. - * - * struct sctp_assoc_value { - * sctp_assoc_t assoc_id; - * uint32_t assoc_value; - * }; +/* + * 7.1.23. Get or set delayed ack timer (SCTP_DELAYED_SACK) + * + * This option will effect the way delayed acks are performed. This + * option allows you to get or set the delayed ack time, in + * milliseconds. It also allows changing the delayed ack frequency. + * Changing the frequency to 1 disables the delayed sack algorithm. If + * the assoc_id is 0, then this sets or gets the endpoints default + * values. If the assoc_id field is non-zero, then the set or get + * effects the specified association for the one to many model (the + * assoc_id field is ignored by the one to one model). Note that if + * sack_delay or sack_freq are 0 when setting this option, then the + * current values will remain unchanged. + * + * struct sctp_sack_info { + * sctp_assoc_t sack_assoc_id; + * uint32_t sack_delay; + * uint32_t sack_freq; + * }; * - * assoc_id - This parameter, indicates which association the - * user is preforming an action upon. Note that if - * this field's value is zero then the endpoints - * default value is changed (effecting future - * associations only). + * sack_assoc_id - This parameter, indicates which association the user + * is performing an action upon. Note that if this field's value is + * zero then the endpoints default value is changed (effecting future + * associations only). * - * assoc_value - This parameter contains the number of milliseconds - * that the user is requesting the delayed ACK timer - * be set to. Note that this value is defined in - * the standard to be between 200 and 500 milliseconds. + * sack_delay - This parameter contains the number of milliseconds that + * the user is requesting the delayed ACK timer be set to. Note that + * this value is defined in the standard to be between 200 and 500 + * milliseconds. * - * Note: a value of zero will leave the value alone, - * but disable SACK delay. A non-zero value will also - * enable SACK delay. + * sack_freq - This parameter contains the number of packets that must + * be received before a sack is sent without waiting for the delay + * timer to expire. The default value for this is 2, setting this + * value to 1 will disable the delayed sack algorithm. */ -static int sctp_getsockopt_delayed_ack_time(struct sock *sk, int len, +static int sctp_getsockopt_delayed_ack(struct sock *sk, int len, char __user *optval, int __user *optlen) { - struct sctp_assoc_value params; + struct sctp_sack_info params; struct sctp_association *asoc = NULL; struct sctp_sock *sp = sctp_sk(sk); - if (len < sizeof(struct sctp_assoc_value)) - return - EINVAL; - - len = sizeof(struct sctp_assoc_value); + if (len >= sizeof(struct sctp_sack_info)) { + len = sizeof(struct sctp_sack_info); - if (copy_from_user(¶ms, optval, len)) - return -EFAULT; + if (copy_from_user(¶ms, optval, len)) + return -EFAULT; + } else if (len == sizeof(struct sctp_assoc_value)) { + printk(KERN_WARNING "SCTP: Use of struct sctp_sack_info " + "in delayed_ack socket option deprecated\n"); + printk(KERN_WARNING "SCTP: struct sctp_sack_info instead\n"); + if (copy_from_user(¶ms, optval, len)) + return -EFAULT; + } else + return - EINVAL; - /* Get association, if assoc_id != 0 and the socket is a one + /* Get association, if sack_assoc_id != 0 and the socket is a one * to many style socket, and an association was not found, then * the id was invalid. */ - asoc = sctp_id2assoc(sk, params.assoc_id); - if (!asoc && params.assoc_id && sctp_style(sk, UDP)) + asoc = sctp_id2assoc(sk, params.sack_assoc_id); + if (!asoc && params.sack_assoc_id && sctp_style(sk, UDP)) return -EINVAL; if (asoc) { /* Fetch association values. */ - if (asoc->param_flags & SPP_SACKDELAY_ENABLE) - params.assoc_value = jiffies_to_msecs( + if (asoc->param_flags & SPP_SACKDELAY_ENABLE) { + params.sack_delay = jiffies_to_msecs( asoc->sackdelay); - else - params.assoc_value = 0; + params.sack_freq = asoc->sackfreq; + + } else { + params.sack_delay = 0; + params.sack_freq = 1; + } } else { /* Fetch socket values. */ - if (sp->param_flags & SPP_SACKDELAY_ENABLE) - params.assoc_value = sp->sackdelay; - else - params.assoc_value = 0; + if (sp->param_flags & SPP_SACKDELAY_ENABLE) { + params.sack_delay = sp->sackdelay; + params.sack_freq = sp->sackfreq; + } else { + params.sack_delay = 0; + params.sack_freq = 1; + } } if (copy_to_user(optval, ¶ms, len)) @@ -5218,8 +5330,8 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname, retval = sctp_getsockopt_peer_addr_params(sk, len, optval, optlen); break; - case SCTP_DELAYED_ACK_TIME: - retval = sctp_getsockopt_delayed_ack_time(sk, len, optval, + case SCTP_DELAYED_ACK: + retval = sctp_getsockopt_delayed_ack(sk, len, optval, optlen); break; case SCTP_INITMSG: diff --git a/net/tipc/config.c b/net/tipc/config.c index c71337a22d3..91d56f8fee9 100644 --- a/net/tipc/config.c +++ b/net/tipc/config.c @@ -529,7 +529,7 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area break; #endif case TIPC_CMD_SET_LOG_SIZE: - rep_tlv_buf = tipc_log_resize(req_tlv_area, req_tlv_space); + rep_tlv_buf = tipc_log_resize_cmd(req_tlv_area, req_tlv_space); break; case TIPC_CMD_DUMP_LOG: rep_tlv_buf = tipc_log_dump(); diff --git a/net/tipc/core.c b/net/tipc/core.c index 740aac5cdfb..6d6aa5a3c24 100644 --- a/net/tipc/core.c +++ b/net/tipc/core.c @@ -49,7 +49,7 @@ #include "config.h" -#define TIPC_MOD_VER "1.6.3" +#define TIPC_MOD_VER "1.6.4" #ifndef CONFIG_TIPC_ZONES #define CONFIG_TIPC_ZONES 3 @@ -182,7 +182,7 @@ static int __init tipc_init(void) { int res; - tipc_log_reinit(CONFIG_TIPC_LOG); + tipc_log_resize(CONFIG_TIPC_LOG); info("Activated (version " TIPC_MOD_VER " compiled " __DATE__ " " __TIME__ ")\n"); @@ -209,7 +209,7 @@ static void __exit tipc_exit(void) tipc_core_stop_net(); tipc_core_stop(); info("Deactivated\n"); - tipc_log_stop(); + tipc_log_resize(0); } module_init(tipc_init); diff --git a/net/tipc/core.h b/net/tipc/core.h index 5a0e4878d3b..bd78d1705c0 100644 --- a/net/tipc/core.h +++ b/net/tipc/core.h @@ -2,7 +2,7 @@ * net/tipc/core.h: Include file for TIPC global declarations * * Copyright (c) 2005-2006, Ericsson AB - * Copyright (c) 2005-2006, Wind River Systems + * Copyright (c) 2005-2007, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -59,84 +59,108 @@ #include <linux/vmalloc.h> /* - * TIPC debugging code + * TIPC sanity test macros */ #define assert(i) BUG_ON(!(i)) -struct tipc_msg; -extern struct print_buf *TIPC_NULL, *TIPC_CONS, *TIPC_LOG; -extern struct print_buf *TIPC_TEE(struct print_buf *, struct print_buf *); -void tipc_msg_print(struct print_buf*,struct tipc_msg *,const char*); -void tipc_printf(struct print_buf *, const char *fmt, ...); -void tipc_dump(struct print_buf*,const char *fmt, ...); - -#ifdef CONFIG_TIPC_DEBUG - /* - * TIPC debug support included: - * - system messages are printed to TIPC_OUTPUT print buffer - * - debug messages are printed to DBG_OUTPUT print buffer + * TIPC system monitoring code */ -#define err(fmt, arg...) tipc_printf(TIPC_OUTPUT, KERN_ERR "TIPC: " fmt, ## arg) -#define warn(fmt, arg...) tipc_printf(TIPC_OUTPUT, KERN_WARNING "TIPC: " fmt, ## arg) -#define info(fmt, arg...) tipc_printf(TIPC_OUTPUT, KERN_NOTICE "TIPC: " fmt, ## arg) +/* + * TIPC's print buffer subsystem supports the following print buffers: + * + * TIPC_NULL : null buffer (i.e. print nowhere) + * TIPC_CONS : system console + * TIPC_LOG : TIPC log buffer + * &buf : user-defined buffer (struct print_buf *) + * + * Note: TIPC_LOG is configured to echo its output to the system console; + * user-defined buffers can be configured to do the same thing. + */ -#define dbg(fmt, arg...) do {if (DBG_OUTPUT != TIPC_NULL) tipc_printf(DBG_OUTPUT, fmt, ## arg);} while(0) -#define msg_dbg(msg, txt) do {if (DBG_OUTPUT != TIPC_NULL) tipc_msg_print(DBG_OUTPUT, msg, txt);} while(0) -#define dump(fmt, arg...) do {if (DBG_OUTPUT != TIPC_NULL) tipc_dump(DBG_OUTPUT, fmt, ##arg);} while(0) +extern struct print_buf *const TIPC_NULL; +extern struct print_buf *const TIPC_CONS; +extern struct print_buf *const TIPC_LOG; +void tipc_printf(struct print_buf *, const char *fmt, ...); /* - * By default, TIPC_OUTPUT is defined to be system console and TIPC log buffer, - * while DBG_OUTPUT is the null print buffer. These defaults can be changed - * here, or on a per .c file basis, by redefining these symbols. The following - * print buffer options are available: - * - * TIPC_NULL : null buffer (i.e. print nowhere) - * TIPC_CONS : system console - * TIPC_LOG : TIPC log buffer - * &buf : user-defined buffer (struct print_buf *) - * TIPC_TEE(&buf_a,&buf_b) : list of buffers (eg. TIPC_TEE(TIPC_CONS,TIPC_LOG)) + * TIPC_OUTPUT is the destination print buffer for system messages. */ #ifndef TIPC_OUTPUT -#define TIPC_OUTPUT TIPC_TEE(TIPC_CONS,TIPC_LOG) -#endif - -#ifndef DBG_OUTPUT -#define DBG_OUTPUT TIPC_NULL +#define TIPC_OUTPUT TIPC_LOG #endif -#else - /* - * TIPC debug support not included: - * - system messages are printed to system console - * - debug messages are not printed + * TIPC can be configured to send system messages to TIPC_OUTPUT + * or to the system console only. */ +#ifdef CONFIG_TIPC_DEBUG + +#define err(fmt, arg...) tipc_printf(TIPC_OUTPUT, \ + KERN_ERR "TIPC: " fmt, ## arg) +#define warn(fmt, arg...) tipc_printf(TIPC_OUTPUT, \ + KERN_WARNING "TIPC: " fmt, ## arg) +#define info(fmt, arg...) tipc_printf(TIPC_OUTPUT, \ + KERN_NOTICE "TIPC: " fmt, ## arg) + +#else + #define err(fmt, arg...) printk(KERN_ERR "TIPC: " fmt , ## arg) #define info(fmt, arg...) printk(KERN_INFO "TIPC: " fmt , ## arg) #define warn(fmt, arg...) printk(KERN_WARNING "TIPC: " fmt , ## arg) -#define dbg(fmt, arg...) do {} while (0) -#define msg_dbg(msg,txt) do {} while (0) -#define dump(fmt,arg...) do {} while (0) +#endif +/* + * DBG_OUTPUT is the destination print buffer for debug messages. + * It defaults to the the null print buffer, but can be redefined + * (typically in the individual .c files being debugged) to allow + * selected debug messages to be generated where needed. + */ + +#ifndef DBG_OUTPUT +#define DBG_OUTPUT TIPC_NULL +#endif /* - * TIPC_OUTPUT is defined to be the system console, while DBG_OUTPUT is - * the null print buffer. Thes ensures that any system or debug messages - * that are generated without using the above macros are handled correctly. + * TIPC can be configured to send debug messages to the specified print buffer + * (typically DBG_OUTPUT) or to suppress them entirely. */ -#undef TIPC_OUTPUT -#define TIPC_OUTPUT TIPC_CONS +#ifdef CONFIG_TIPC_DEBUG -#undef DBG_OUTPUT -#define DBG_OUTPUT TIPC_NULL +#define dbg(fmt, arg...) \ + do { \ + if (DBG_OUTPUT != TIPC_NULL) \ + tipc_printf(DBG_OUTPUT, fmt, ## arg); \ + } while (0) +#define msg_dbg(msg, txt) \ + do { \ + if (DBG_OUTPUT != TIPC_NULL) \ + tipc_msg_dbg(DBG_OUTPUT, msg, txt); \ + } while (0) +#define dump(fmt, arg...) \ + do { \ + if (DBG_OUTPUT != TIPC_NULL) \ + tipc_dump_dbg(DBG_OUTPUT, fmt, ##arg); \ + } while (0) + +void tipc_msg_dbg(struct print_buf *, struct tipc_msg *, const char *); +void tipc_dump_dbg(struct print_buf *, const char *fmt, ...); + +#else + +#define dbg(fmt, arg...) do {} while (0) +#define msg_dbg(msg, txt) do {} while (0) +#define dump(fmt, arg...) do {} while (0) + +#define tipc_msg_dbg(...) do {} while (0) +#define tipc_dump_dbg(...) do {} while (0) #endif diff --git a/net/tipc/dbg.c b/net/tipc/dbg.c index e809d2a2ce0..29ecae85166 100644 --- a/net/tipc/dbg.c +++ b/net/tipc/dbg.c @@ -2,7 +2,7 @@ * net/tipc/dbg.c: TIPC print buffer routines for debugging * * Copyright (c) 1996-2006, Ericsson AB - * Copyright (c) 2005-2006, Wind River Systems + * Copyright (c) 2005-2007, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -38,17 +38,43 @@ #include "config.h" #include "dbg.h" -static char print_string[TIPC_PB_MAX_STR]; -static DEFINE_SPINLOCK(print_lock); +/* + * TIPC pre-defines the following print buffers: + * + * TIPC_NULL : null buffer (i.e. print nowhere) + * TIPC_CONS : system console + * TIPC_LOG : TIPC log buffer + * + * Additional user-defined print buffers are also permitted. + */ -static struct print_buf null_buf = { NULL, 0, NULL, NULL }; -struct print_buf *TIPC_NULL = &null_buf; +static struct print_buf null_buf = { NULL, 0, NULL, 0 }; +struct print_buf *const TIPC_NULL = &null_buf; -static struct print_buf cons_buf = { NULL, 0, NULL, NULL }; -struct print_buf *TIPC_CONS = &cons_buf; +static struct print_buf cons_buf = { NULL, 0, NULL, 1 }; +struct print_buf *const TIPC_CONS = &cons_buf; -static struct print_buf log_buf = { NULL, 0, NULL, NULL }; -struct print_buf *TIPC_LOG = &log_buf; +static struct print_buf log_buf = { NULL, 0, NULL, 1 }; +struct print_buf *const TIPC_LOG = &log_buf; + +/* + * Locking policy when using print buffers. + * + * 1) tipc_printf() uses 'print_lock' to protect against concurrent access to + * 'print_string' when writing to a print buffer. This also protects against + * concurrent writes to the print buffer being written to. + * + * 2) tipc_dump() and tipc_log_XXX() leverage the aforementioned + * use of 'print_lock' to protect against all types of concurrent operations + * on their associated print buffer (not just write operations). + * + * Note: All routines of the form tipc_printbuf_XXX() are lock-free, and rely + * on the caller to prevent simultaneous use of the print buffer(s) being + * manipulated. + */ + +static char print_string[TIPC_PB_MAX_STR]; +static DEFINE_SPINLOCK(print_lock); #define FORMAT(PTR,LEN,FMT) \ @@ -60,27 +86,14 @@ struct print_buf *TIPC_LOG = &log_buf; *(PTR + LEN) = '\0';\ } -/* - * Locking policy when using print buffers. - * - * The following routines use 'print_lock' for protection: - * 1) tipc_printf() - to protect its print buffer(s) and 'print_string' - * 2) TIPC_TEE() - to protect its print buffer(s) - * 3) tipc_dump() - to protect its print buffer(s) and 'print_string' - * 4) tipc_log_XXX() - to protect TIPC_LOG - * - * All routines of the form tipc_printbuf_XXX() rely on the caller to prevent - * simultaneous use of the print buffer(s) being manipulated. - */ - /** * tipc_printbuf_init - initialize print buffer to empty * @pb: pointer to print buffer structure * @raw: pointer to character array used by print buffer * @size: size of character array * - * Makes the print buffer a null device that discards anything written to it - * if the character array is too small (or absent). + * Note: If the character array is too small (or absent), the print buffer + * becomes a null device that discards anything written to it. */ void tipc_printbuf_init(struct print_buf *pb, char *raw, u32 size) @@ -88,13 +101,13 @@ void tipc_printbuf_init(struct print_buf *pb, char *raw, u32 size) pb->buf = raw; pb->crs = raw; pb->size = size; - pb->next = NULL; + pb->echo = 0; if (size < TIPC_PB_MIN_SIZE) { pb->buf = NULL; } else if (raw) { pb->buf[0] = 0; - pb->buf[size-1] = ~0; + pb->buf[size - 1] = ~0; } } @@ -105,7 +118,11 @@ void tipc_printbuf_init(struct print_buf *pb, char *raw, u32 size) void tipc_printbuf_reset(struct print_buf *pb) { - tipc_printbuf_init(pb, pb->buf, pb->size); + if (pb->buf) { + pb->crs = pb->buf; + pb->buf[0] = 0; + pb->buf[pb->size - 1] = ~0; + } } /** @@ -141,7 +158,7 @@ int tipc_printbuf_validate(struct print_buf *pb) if (pb->buf[pb->size - 1] == 0) { cp_buf = kmalloc(pb->size, GFP_ATOMIC); - if (cp_buf != NULL){ + if (cp_buf) { tipc_printbuf_init(&cb, cp_buf, pb->size); tipc_printbuf_move(&cb, pb); tipc_printbuf_move(pb, &cb); @@ -179,15 +196,16 @@ void tipc_printbuf_move(struct print_buf *pb_to, struct print_buf *pb_from) } if (pb_to->size < pb_from->size) { - tipc_printbuf_reset(pb_to); - tipc_printf(pb_to, "*** PRINT BUFFER MOVE ERROR ***"); + strcpy(pb_to->buf, "*** PRINT BUFFER MOVE ERROR ***"); + pb_to->buf[pb_to->size - 1] = ~0; + pb_to->crs = strchr(pb_to->buf, 0); return; } /* Copy data from char after cursor to end (if used) */ len = pb_from->buf + pb_from->size - pb_from->crs - 2; - if ((pb_from->buf[pb_from->size-1] == 0) && (len > 0)) { + if ((pb_from->buf[pb_from->size - 1] == 0) && (len > 0)) { strcpy(pb_to->buf, pb_from->crs + 1); pb_to->crs = pb_to->buf + len; } else @@ -203,8 +221,8 @@ void tipc_printbuf_move(struct print_buf *pb_to, struct print_buf *pb_from) } /** - * tipc_printf - append formatted output to print buffer chain - * @pb: pointer to chain of print buffers (may be NULL) + * tipc_printf - append formatted output to print buffer + * @pb: pointer to print buffer * @fmt: formatted info to be printed */ @@ -213,68 +231,40 @@ void tipc_printf(struct print_buf *pb, const char *fmt, ...) int chars_to_add; int chars_left; char save_char; - struct print_buf *pb_next; spin_lock_bh(&print_lock); + FORMAT(print_string, chars_to_add, fmt); if (chars_to_add >= TIPC_PB_MAX_STR) strcpy(print_string, "*** PRINT BUFFER STRING TOO LONG ***"); - while (pb) { - if (pb == TIPC_CONS) - printk(print_string); - else if (pb->buf) { - chars_left = pb->buf + pb->size - pb->crs - 1; - if (chars_to_add <= chars_left) { - strcpy(pb->crs, print_string); - pb->crs += chars_to_add; - } else if (chars_to_add >= (pb->size - 1)) { - strcpy(pb->buf, print_string + chars_to_add + 1 - - pb->size); - pb->crs = pb->buf + pb->size - 1; - } else { - strcpy(pb->buf, print_string + chars_left); - save_char = print_string[chars_left]; - print_string[chars_left] = 0; - strcpy(pb->crs, print_string); - print_string[chars_left] = save_char; - pb->crs = pb->buf + chars_to_add - chars_left; - } + if (pb->buf) { + chars_left = pb->buf + pb->size - pb->crs - 1; + if (chars_to_add <= chars_left) { + strcpy(pb->crs, print_string); + pb->crs += chars_to_add; + } else if (chars_to_add >= (pb->size - 1)) { + strcpy(pb->buf, print_string + chars_to_add + 1 + - pb->size); + pb->crs = pb->buf + pb->size - 1; + } else { + strcpy(pb->buf, print_string + chars_left); + save_char = print_string[chars_left]; + print_string[chars_left] = 0; + strcpy(pb->crs, print_string); + print_string[chars_left] = save_char; + pb->crs = pb->buf + chars_to_add - chars_left; } - pb_next = pb->next; - pb->next = NULL; - pb = pb_next; } - spin_unlock_bh(&print_lock); -} -/** - * TIPC_TEE - perform next output operation on both print buffers - * @b0: pointer to chain of print buffers (may be NULL) - * @b1: pointer to print buffer to add to chain - * - * Returns pointer to print buffer chain. - */ + if (pb->echo) + printk(print_string); -struct print_buf *TIPC_TEE(struct print_buf *b0, struct print_buf *b1) -{ - struct print_buf *pb = b0; - - if (!b0 || (b0 == b1)) - return b1; - - spin_lock_bh(&print_lock); - while (pb->next) { - if ((pb->next == b1) || (pb->next == b0)) - pb->next = pb->next->next; - else - pb = pb->next; - } - pb->next = b1; spin_unlock_bh(&print_lock); - return b0; } +#ifdef CONFIG_TIPC_DEBUG + /** * print_to_console - write string of bytes to console in multiple chunks */ @@ -321,72 +311,66 @@ static void printbuf_dump(struct print_buf *pb) } /** - * tipc_dump - dump non-console print buffer(s) to console - * @pb: pointer to chain of print buffers + * tipc_dump_dbg - dump (non-console) print buffer to console + * @pb: pointer to print buffer */ -void tipc_dump(struct print_buf *pb, const char *fmt, ...) +void tipc_dump_dbg(struct print_buf *pb, const char *fmt, ...) { - struct print_buf *pb_next; int len; + if (pb == TIPC_CONS) + return; + spin_lock_bh(&print_lock); + FORMAT(print_string, len, fmt); printk(print_string); - for (; pb; pb = pb->next) { - if (pb != TIPC_CONS) { - printk("\n---- Start of %s log dump ----\n\n", - (pb == TIPC_LOG) ? "global" : "local"); - printbuf_dump(pb); - tipc_printbuf_reset(pb); - printk("\n---- End of dump ----\n"); - } - pb_next = pb->next; - pb->next = NULL; - pb = pb_next; - } + printk("\n---- Start of %s log dump ----\n\n", + (pb == TIPC_LOG) ? "global" : "local"); + printbuf_dump(pb); + tipc_printbuf_reset(pb); + printk("\n---- End of dump ----\n"); + spin_unlock_bh(&print_lock); } +#endif + /** - * tipc_log_stop - free up TIPC log print buffer + * tipc_log_resize - change the size of the TIPC log buffer + * @log_size: print buffer size to use */ -void tipc_log_stop(void) +int tipc_log_resize(int log_size) { + int res = 0; + spin_lock_bh(&print_lock); if (TIPC_LOG->buf) { kfree(TIPC_LOG->buf); TIPC_LOG->buf = NULL; } - spin_unlock_bh(&print_lock); -} - -/** - * tipc_log_reinit - (re)initialize TIPC log print buffer - * @log_size: print buffer size to use - */ - -void tipc_log_reinit(int log_size) -{ - tipc_log_stop(); - if (log_size) { if (log_size < TIPC_PB_MIN_SIZE) log_size = TIPC_PB_MIN_SIZE; - spin_lock_bh(&print_lock); + res = TIPC_LOG->echo; tipc_printbuf_init(TIPC_LOG, kmalloc(log_size, GFP_ATOMIC), log_size); - spin_unlock_bh(&print_lock); + TIPC_LOG->echo = res; + res = !TIPC_LOG->buf; } + spin_unlock_bh(&print_lock); + + return res; } /** - * tipc_log_resize - reconfigure size of TIPC log buffer + * tipc_log_resize_cmd - reconfigure size of TIPC log buffer */ -struct sk_buff *tipc_log_resize(const void *req_tlv_area, int req_tlv_space) +struct sk_buff *tipc_log_resize_cmd(const void *req_tlv_area, int req_tlv_space) { u32 value; @@ -397,7 +381,9 @@ struct sk_buff *tipc_log_resize(const void *req_tlv_area, int req_tlv_space) if (value != delimit(value, 0, 32768)) return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE " (log size must be 0-32768)"); - tipc_log_reinit(value); + if (tipc_log_resize(value)) + return tipc_cfg_reply_error_string( + "unable to create specified log (log size is now 0)"); return tipc_cfg_reply_none(); } @@ -410,27 +396,32 @@ struct sk_buff *tipc_log_dump(void) struct sk_buff *reply; spin_lock_bh(&print_lock); - if (!TIPC_LOG->buf) + if (!TIPC_LOG->buf) { + spin_unlock_bh(&print_lock); reply = tipc_cfg_reply_ultra_string("log not activated\n"); - else if (tipc_printbuf_empty(TIPC_LOG)) + } else if (tipc_printbuf_empty(TIPC_LOG)) { + spin_unlock_bh(&print_lock); reply = tipc_cfg_reply_ultra_string("log is empty\n"); + } else { struct tlv_desc *rep_tlv; struct print_buf pb; int str_len; str_len = min(TIPC_LOG->size, 32768u); + spin_unlock_bh(&print_lock); reply = tipc_cfg_reply_alloc(TLV_SPACE(str_len)); if (reply) { rep_tlv = (struct tlv_desc *)reply->data; tipc_printbuf_init(&pb, TLV_DATA(rep_tlv), str_len); + spin_lock_bh(&print_lock); tipc_printbuf_move(&pb, TIPC_LOG); + spin_unlock_bh(&print_lock); str_len = strlen(TLV_DATA(rep_tlv)) + 1; skb_put(reply, TLV_SPACE(str_len)); TLV_SET(rep_tlv, TIPC_TLV_ULTRA_STRING, NULL, str_len); } } - spin_unlock_bh(&print_lock); return reply; } diff --git a/net/tipc/dbg.h b/net/tipc/dbg.h index c01b085000e..5ef1bc8f64e 100644 --- a/net/tipc/dbg.h +++ b/net/tipc/dbg.h @@ -2,7 +2,7 @@ * net/tipc/dbg.h: Include file for TIPC print buffer routines * * Copyright (c) 1997-2006, Ericsson AB - * Copyright (c) 2005-2006, Wind River Systems + * Copyright (c) 2005-2007, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -42,14 +42,14 @@ * @buf: pointer to character array containing print buffer contents * @size: size of character array * @crs: pointer to first unused space in character array (i.e. final NUL) - * @next: used to link print buffers when printing to more than one at a time + * @echo: echo output to system console if non-zero */ struct print_buf { char *buf; u32 size; char *crs; - struct print_buf *next; + int echo; }; #define TIPC_PB_MIN_SIZE 64 /* minimum size for a print buffer's array */ @@ -61,10 +61,10 @@ int tipc_printbuf_empty(struct print_buf *pb); int tipc_printbuf_validate(struct print_buf *pb); void tipc_printbuf_move(struct print_buf *pb_to, struct print_buf *pb_from); -void tipc_log_reinit(int log_size); -void tipc_log_stop(void); +int tipc_log_resize(int log_size); -struct sk_buff *tipc_log_resize(const void *req_tlv_area, int req_tlv_space); +struct sk_buff *tipc_log_resize_cmd(const void *req_tlv_area, + int req_tlv_space); struct sk_buff *tipc_log_dump(void); #endif diff --git a/net/tipc/link.c b/net/tipc/link.c index 2a26a16e269..bd206ebe4ee 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -147,9 +147,21 @@ static void link_print(struct link *l_ptr, struct print_buf *buf, #define LINK_LOG_BUF_SIZE 0 -#define dbg_link(fmt, arg...) do {if (LINK_LOG_BUF_SIZE) tipc_printf(&l_ptr->print_buf, fmt, ## arg); } while(0) -#define dbg_link_msg(msg, txt) do {if (LINK_LOG_BUF_SIZE) tipc_msg_print(&l_ptr->print_buf, msg, txt); } while(0) -#define dbg_link_state(txt) do {if (LINK_LOG_BUF_SIZE) link_print(l_ptr, &l_ptr->print_buf, txt); } while(0) +#define dbg_link(fmt, arg...) \ + do { \ + if (LINK_LOG_BUF_SIZE) \ + tipc_printf(&l_ptr->print_buf, fmt, ## arg); \ + } while (0) +#define dbg_link_msg(msg, txt) \ + do { \ + if (LINK_LOG_BUF_SIZE) \ + tipc_msg_dbg(&l_ptr->print_buf, msg, txt); \ + } while (0) +#define dbg_link_state(txt) \ + do { \ + if (LINK_LOG_BUF_SIZE) \ + link_print(l_ptr, &l_ptr->print_buf, txt); \ + } while (0) #define dbg_link_dump() do { \ if (LINK_LOG_BUF_SIZE) { \ tipc_printf(LOG, "\n\nDumping link <%s>:\n", l_ptr->name); \ @@ -1651,7 +1663,7 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf) struct tipc_msg *msg = buf_msg(buf); warn("Retransmission failure on link <%s>\n", l_ptr->name); - tipc_msg_print(TIPC_OUTPUT, msg, ">RETR-FAIL>"); + tipc_msg_dbg(TIPC_OUTPUT, msg, ">RETR-FAIL>"); if (l_ptr->addr) { diff --git a/net/tipc/msg.c b/net/tipc/msg.c index 696a8633df7..38abebaae88 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -41,7 +41,9 @@ #include "bearer.h" -void tipc_msg_print(struct print_buf *buf, struct tipc_msg *msg, const char *str) +#ifdef CONFIG_TIPC_DEBUG + +void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str) { u32 usr = msg_user(msg); tipc_printf(buf, str); @@ -315,9 +317,11 @@ void tipc_msg_print(struct print_buf *buf, struct tipc_msg *msg, const char *str } tipc_printf(buf, "\n"); if ((usr == CHANGEOVER_PROTOCOL) && (msg_msgcnt(msg))) { - tipc_msg_print(buf,msg_get_wrapped(msg)," /"); + tipc_msg_dbg(buf, msg_get_wrapped(msg), " /"); } if ((usr == MSG_FRAGMENTER) && (msg_type(msg) == FIRST_FRAGMENT)) { - tipc_msg_print(buf,msg_get_wrapped(msg)," /"); + tipc_msg_dbg(buf, msg_get_wrapped(msg), " /"); } } + +#endif diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c index 39fd1619feb..aecba5cd87d 100644 --- a/net/tipc/name_distr.c +++ b/net/tipc/name_distr.c @@ -41,9 +41,6 @@ #include "msg.h" #include "name_distr.h" -#undef DBG_OUTPUT -#define DBG_OUTPUT NULL - #define ITEM_SIZE sizeof(struct distr_item) /** diff --git a/net/tipc/name_table.c b/net/tipc/name_table.c index ac7dfdda797..892373e498e 100644 --- a/net/tipc/name_table.c +++ b/net/tipc/name_table.c @@ -1050,15 +1050,12 @@ void tipc_nametbl_dump(void) int tipc_nametbl_init(void) { - int array_size = sizeof(struct hlist_head) * tipc_nametbl_size; - - table.types = kzalloc(array_size, GFP_ATOMIC); + table.types = kcalloc(tipc_nametbl_size, sizeof(struct hlist_head), + GFP_ATOMIC); if (!table.types) return -ENOMEM; - write_lock_bh(&tipc_nametbl_lock); table.local_publ_count = 0; - write_unlock_bh(&tipc_nametbl_lock); return 0; } diff --git a/net/tipc/port.c b/net/tipc/port.c index 2f5806410c6..757de38fe6a 100644 --- a/net/tipc/port.c +++ b/net/tipc/port.c @@ -211,15 +211,18 @@ exit: } /** - * tipc_createport_raw - create a native TIPC port + * tipc_createport_raw - create a generic TIPC port * - * Returns local port reference + * Returns port reference, or 0 if unable to create it + * + * Note: The newly created port is returned in the locked state. */ u32 tipc_createport_raw(void *usr_handle, u32 (*dispatcher)(struct tipc_port *, struct sk_buff *), void (*wakeup)(struct tipc_port *), - const u32 importance) + const u32 importance, + struct tipc_port **tp_ptr) { struct port *p_ptr; struct tipc_msg *msg; @@ -237,7 +240,6 @@ u32 tipc_createport_raw(void *usr_handle, return 0; } - tipc_port_lock(ref); p_ptr->publ.usr_handle = usr_handle; p_ptr->publ.max_pkt = MAX_PKT_DEFAULT; p_ptr->publ.ref = ref; @@ -262,7 +264,7 @@ u32 tipc_createport_raw(void *usr_handle, INIT_LIST_HEAD(&p_ptr->port_list); list_add_tail(&p_ptr->port_list, &ports); spin_unlock_bh(&tipc_port_list_lock); - tipc_port_unlock(p_ptr); + *tp_ptr = &p_ptr->publ; return ref; } @@ -1053,6 +1055,7 @@ int tipc_createport(u32 user_ref, { struct user_port *up_ptr; struct port *p_ptr; + struct tipc_port *tp_ptr; u32 ref; up_ptr = kmalloc(sizeof(*up_ptr), GFP_ATOMIC); @@ -1060,12 +1063,13 @@ int tipc_createport(u32 user_ref, warn("Port creation failed, no memory\n"); return -ENOMEM; } - ref = tipc_createport_raw(NULL, port_dispatcher, port_wakeup, importance); - p_ptr = tipc_port_lock(ref); - if (!p_ptr) { + ref = tipc_createport_raw(NULL, port_dispatcher, port_wakeup, + importance, &tp_ptr); + if (ref == 0) { kfree(up_ptr); return -ENOMEM; } + p_ptr = (struct port *)tp_ptr; p_ptr->user_port = up_ptr; up_ptr->user_ref = user_ref; diff --git a/net/tipc/ref.c b/net/tipc/ref.c index 89cbab24d08..a101de86824 100644 --- a/net/tipc/ref.c +++ b/net/tipc/ref.c @@ -142,9 +142,13 @@ void tipc_ref_table_stop(void) /** * tipc_ref_acquire - create reference to an object * - * Return a unique reference value which can be translated back to the pointer - * 'object' at a later time. Also, pass back a pointer to the lock protecting - * the object, but without locking it. + * Register an object pointer in reference table and lock the object. + * Returns a unique reference value that is used from then on to retrieve the + * object pointer, or to determine that the object has been deregistered. + * + * Note: The object is returned in the locked state so that the caller can + * register a partially initialized object, without running the risk that + * the object will be accessed before initialization is complete. */ u32 tipc_ref_acquire(void *object, spinlock_t **lock) @@ -178,13 +182,13 @@ u32 tipc_ref_acquire(void *object, spinlock_t **lock) ref = (next_plus_upper & ~index_mask) + index; entry->ref = ref; entry->object = object; - spin_unlock_bh(&entry->lock); *lock = &entry->lock; } else if (tipc_ref_table.init_point < tipc_ref_table.capacity) { index = tipc_ref_table.init_point++; entry = &(tipc_ref_table.entries[index]); spin_lock_init(&entry->lock); + spin_lock_bh(&entry->lock); ref = tipc_ref_table.start_mask + index; entry->ref = ref; entry->object = object; diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 230f9ca2ad6..38f48795b40 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -188,6 +188,7 @@ static int tipc_create(struct net *net, struct socket *sock, int protocol) const struct proto_ops *ops; socket_state state; struct sock *sk; + struct tipc_port *tp_ptr; u32 portref; /* Validate arguments */ @@ -225,7 +226,7 @@ static int tipc_create(struct net *net, struct socket *sock, int protocol) /* Allocate TIPC port for socket to use */ portref = tipc_createport_raw(sk, &dispatch, &wakeupdispatch, - TIPC_LOW_IMPORTANCE); + TIPC_LOW_IMPORTANCE, &tp_ptr); if (unlikely(portref == 0)) { sk_free(sk); return -ENOMEM; @@ -241,6 +242,8 @@ static int tipc_create(struct net *net, struct socket *sock, int protocol) sk->sk_backlog_rcv = backlog_rcv; tipc_sk(sk)->p = tipc_get_port(portref); + spin_unlock_bh(tp_ptr->lock); + if (sock->state == SS_READY) { tipc_set_portunreturnable(portref, 1); if (sock->type == SOCK_DGRAM) diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c index 8c01ccd3626..8f8d0a6c1c1 100644 --- a/net/tipc/subscr.c +++ b/net/tipc/subscr.c @@ -474,6 +474,7 @@ static void subscr_named_msg_event(void *usr_handle, kfree(subscriber); return; } + spin_unlock_bh(subscriber->lock); /* Establish a connection to subscriber */ |