diff options
| -rw-r--r-- | MAINTAINERS | 3 | ||||
| -rw-r--r-- | arch/arm/configs/mx3_defconfig | 101 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/clock_imx21.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/clock_imx27.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/mxt_td60.c | 319 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/Kconfig | 8 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/clock-imx35.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/kzmarm11.c | 268 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/mx31moboard.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mx3/mx35pdk.c | 12 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/audmux-v1.c | 9 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/board-kzmarm11.h | 39 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux-mx3.h | 8 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/uncompress.h | 1 |
18 files changed, 750 insertions, 39 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 54f7d4afdbb..d13e2e33d40 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -637,6 +637,9 @@ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE M: Sascha Hauer <kernel@pengutronix.de> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +T: git://git.pengutronix.de/git/imx/linux-2.6.git +F: arch/arm/mach-mx*/ +F: arch/arm/plat-mxc/ ARM/GLOMATION GESBC9312SX MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index a4f9a2a8149..7734ccab211 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Tue Jul 28 14:11:34 2009 +# Linux kernel version: 2.6.32-rc5 +# Sun Nov 1 22:56:24 2009 # CONFIG_ARM=y CONFIG_HAVE_PWM=y @@ -9,7 +9,6 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -46,11 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -87,16 +87,14 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -139,6 +137,7 @@ CONFIG_FREEZER=y # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -153,6 +152,7 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -175,18 +175,22 @@ CONFIG_ARCH_MXC=y # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set # # Freescale MXC Implementations # # CONFIG_ARCH_MX1 is not set # CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX25 is not set CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MXC91231 is not set CONFIG_ARCH_MX31=y CONFIG_ARCH_MX35=y @@ -205,6 +209,7 @@ CONFIG_MACH_QONG=y CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_KZM_ARM11_01=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_ARCH_HAS_RNGA=y @@ -218,7 +223,7 @@ CONFIG_CPU_V6=y # CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -236,6 +241,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_L2X0=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -257,6 +263,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -277,6 +285,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -326,6 +335,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -367,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -407,6 +418,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -416,9 +428,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -587,14 +599,12 @@ CONFIG_DNET=y # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC=y # CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -608,6 +618,7 @@ CONFIG_FEC=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -630,7 +641,14 @@ CONFIG_DEVKMEM=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support @@ -649,6 +667,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -681,15 +700,17 @@ CONFIG_I2C_IMX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -712,6 +733,10 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# CONFIG_W1=y # @@ -734,7 +759,6 @@ CONFIG_W1_SLAVE_THERM=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -759,12 +783,24 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_CONFIG_MODE_0=y CONFIG_MFD_WM8352_CONFIG_MODE_0=y CONFIG_MFD_WM8350_I2C=y # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_WM8350=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set CONFIG_MEDIA_SUPPORT=y # @@ -874,10 +910,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_MXC=y # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set CONFIG_DMADEVICES=y @@ -896,16 +934,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_WM8350=y -# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -921,6 +954,7 @@ CONFIG_REGULATOR_WM8350=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -995,7 +1029,6 @@ CONFIG_UBIFS_FS_ZLIB=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1033,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1062,7 +1096,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1104,11 +1137,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 3e14da3698b..b96c6a38936 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -104,4 +104,11 @@ config MACH_PCA100 Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. +config MACH_MXT_TD60 + bool "Maxtrack i-MXT TD60" + depends on MACH_MX27 + help + Include support for i-MXT (aka td60) platform. This + includes specific configurations for the module and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 19560f04563..52aca0aaf9b 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += pca100.o +obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index eede79855f4..91901b5d56c 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -1000,7 +1000,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_enable(&per_clk[0]); clk_enable(&gpio_clk); -#ifdef CONFIG_DEBUG_LL_CONSOLE +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) clk_enable(&uart_clk[0]); #endif diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index aa640b4876c..b010bf9ceaa 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -751,7 +751,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&emi_clk); clk_enable(&iim_clk); -#ifdef CONFIG_DEBUG_LL_CONSOLE +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) clk_enable(&uart1_clk); #endif diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c new file mode 100644 index 00000000000..03dbbdc9895 --- /dev/null +++ b/arch/arm/mach-mx2/mxt_td60.c @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/gpio.h> +#include <mach/imx-uart.h> +#include <mach/iomux.h> +#include <mach/mxc_nand.h> +#include <mach/i2c.h> +#include <linux/i2c/pca953x.h> +#include <mach/imxfb.h> +#include <mach/mmc.h> + +#include "devices.h" + +static unsigned int mxt_td60_pins[] __initdata = { + /* UART0 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART1 */ + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD, + /* UART2 */ + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS, + /* UART3 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* UART4 */ + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS, + /* UART5 */ + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C1 */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* I2C2 */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* FB */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA25_PF_CLS, + PA27_PF_SPL_SPR, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + PA31_PF_OE_ACD, + /* OWIRE */ + PE16_AF_OWIRE, + /* SDHC1*/ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + PF8_AF_ATA_IORDY, + /* SDHC2*/ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +}; + +static struct mxc_nand_platform_data mxt_td60_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct imxi2c_platform_data mxt_td60_i2c_data = { + .bitrate = 100000, +}; + +/* PCA9557 */ +static int mxt_td60_pca9557_setup(struct i2c_client *client, + unsigned gpio_base, unsigned ngpio, + void *context) +{ + static int mxt_td60_gpio_value[] = { + -1, -1, -1, -1, -1, -1, -1, 1 + }; + int n; + + for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) { + gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp"); + if (mxt_td60_gpio_value[n] < 0) + gpio_direction_input(gpio_base + n); + else + gpio_direction_output(gpio_base + n, + mxt_td60_gpio_value[n]); + gpio_export(gpio_base + n, 0); + } + + return 0; +} + +static struct pca953x_platform_data mxt_td60_pca9557_pdata = { + .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */ + .invert = 0, /* Do not invert */ + .setup = mxt_td60_pca9557_setup, +}; + +static struct i2c_board_info mxt_td60_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9557", 0x18), + .platform_data = &mxt_td60_pca9557_pdata, + }, +}; + +static struct imxi2c_platform_data mxt_td60_i2c2_data = { + .bitrate = 100000, +}; + +static struct i2c_board_info mxt_td60_i2c2_devices[] = { +}; + +static struct imx_fb_videomode mxt_td60_modes[] = { + { + .mode = { + .name = "Chimei LW700AT9003", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30303, + .hsync_len = 64, + .left_margin = 0x67, + .right_margin = 0x68, + .vsync_len = 16, + .upper_margin = 0x0f, + .lower_margin = 0x0f, + }, + .bpp = 16, + .pcr = 0xFA208B83, + }, +}; + +static struct imx_fb_platform_data mxt_td60_fb_data = { + .mode = mxt_td60_modes, + .num_modes = ARRAY_SIZE(mxt_td60_modes), + + /* + * - HSYNC active high + * - VSYNC active high + * - clk notenabled while idle + * - clock inverted + * - data not inverted + * - data enable low active + * - enable sharp mode + */ + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING, + "sdhc1-card-detect", data); +} + +static void mxt_td60_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOF(8), data); +} + +static struct imxmmc_platform_data sdhc1_pdata = { + .init = mxt_td60_sdhc1_init, + .exit = mxt_td60_sdhc1_exit, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_fec_device, +}; + +static struct imxuart_platform_data uart_pdata[] = { + { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static void __init mxt_td60_board_init(void) +{ + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), + "MXT_TD60"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); + mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); + mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); + mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); + mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); + mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); + + i2c_register_board_info(0, mxt_td60_i2c_devices, + ARRAY_SIZE(mxt_td60_i2c_devices)); + + i2c_register_board_info(1, mxt_td60_i2c2_devices, + ARRAY_SIZE(mxt_td60_i2c2_devices)); + + mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data); + mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data); + mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); + mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mxt_td60_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer mxt_td60_timer = { + .init = mxt_td60_timer_init, +}; + +MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") + /* maintainer: Maxtrack Industrial */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = mxt_td60_board_init, + .timer = &mxt_td60_timer, +MACHINE_END + diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 0177b8a5fe3..ea8ed109a7c 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -103,4 +103,12 @@ config MACH_MX35_3DS help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. + +config MACH_KZM_ARM11_01 + bool "Support KZM-ARM11-01(Kyoto Microcomputer)" + select ARCH_MX31 + help + Include support for KZM-ARM11-01. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 940035cacae..93c7b296be6 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_QONG) += qong.o obj-$(CONFIG_MACH_PCM043) += pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o +obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 02a9a18e118..7584b4c6c55 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -387,6 +387,8 @@ DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL); DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL); DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); +DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL); + static int clk_dummy_enable(struct clk *clk) { return 0; @@ -471,6 +473,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk) _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) @@ -485,7 +488,7 @@ int __init mx35_clocks_init() int i; unsigned int ll = 0; -#ifdef CONFIG_DEBUG_LL_CONSOLE +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) ll = (3 << 16); #endif diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c new file mode 100644 index 00000000000..6fa99ce3008 --- /dev/null +++ b/arch/arm/mach-mx3/kzmarm11.c @@ -0,0 +1,268 @@ +/* + * KZM-ARM11-01 support + * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * based on code for MX31ADS, + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/smsc911x.h> +#include <linux/types.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/board-kzmarm11.h> +#include <mach/clock.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> +#include <mach/memory.h> + +#include "devices.h" + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +/* + * KZM-ARM11-01 has an external UART on FPGA + */ +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = IO_ADDRESS(KZM_ARM11_16550), + .mapbase = KZM_ARM11_16550, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + .irqflags = IRQ_TYPE_EDGE_RISING, + .uartclk = 14745600, + .regshift = 0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_BUGGY_UART, + }, + {}, +}; + +static struct resource serial8250_resources[] = { + { + .start = KZM_ARM11_16550, + .end = KZM_ARM11_16550 + 0x10, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = ARRAY_SIZE(serial8250_resources), + .resource = serial8250_resources, +}; + +static int __init kzm_init_ext_uart(void) +{ + u8 tmp; + + /* + * GPIO 1-1: external UART interrupt line + */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + + /* + * Unmask UART interrupt + */ + tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1)); + tmp |= 0x2; + __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1)); + + return platform_device_register(&serial_device); +} +#else +static inline int kzm_init_ext_uart(void) +{ + return 0; +} +#endif + +/* + * SMSC LAN9118 + */ +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct smsc911x_platform_config kzm_smsc9118_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, +}; + +static struct resource kzm_smsc9118_resources[] = { + { + .start = CS5_BASE_ADDR, + .end = CS5_BASE_ADDR + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device kzm_smsc9118_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), + .resource = kzm_smsc9118_resources, + .dev = { + .platform_data = &kzm_smsc9118_config, + }, +}; + +static int __init kzm_init_smsc9118(void) +{ + /* + * GPIO 1-2: SMSC9118 interrupt line + */ + mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + + return platform_device_register(&kzm_smsc9118_device); +} +#else +static inline int kzm_init_smsc9118(void) +{ + return 0; +} +#endif + +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static void __init kzm_init_imx_uart(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); +} +#else +static inline void kzm_init_imx_uart(void) +{ +} +#endif + +static int kzm_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_DCD_DCE1__DCD_DCE1, + MX31_PIN_RI_DCE1__RI_DCE1, + MX31_PIN_DSR_DCE1__DSR_DCE1, + MX31_PIN_DTR_DCE1__DTR_DCE1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_DCD_DTE1__DCD_DTE2, + MX31_PIN_RI_DTE1__RI_DTE2, + MX31_PIN_DSR_DTE1__DSR_DTE2, + MX31_PIN_DTR_DTE1__DTR_DTE2, +}; + +/* + * Board specific initialization. + */ +static void __init kzm_board_init(void) +{ + mxc_iomux_setup_multiple_pins(kzm_pins, + ARRAY_SIZE(kzm_pins), "kzm"); + kzm_init_ext_uart(); + kzm_init_smsc9118(); + kzm_init_imx_uart(); + + pr_info("Clock input source is 26MHz\n"); +} + +/* + * This structure defines static mappings for the kzm-arm11-01 board. + */ +static struct map_desc kzm_io_desc[] __initdata = { + { + .virtual = CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = CS4_SIZE, + .type = MT_DEVICE + }, + { + .virtual = CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS5_BASE_ADDR), + .length = CS5_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Set up static virtual mappings. + */ +static void __init kzm_map_io(void) +{ + mx31_map_io(); + iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); +} + +static void __init kzm_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer kzm_timer = { + .init = kzm_timer_init, +}; + +/* + * The following uses standard kernel macros define in arch.h in order to + * initialize __mach_desc_KZM_ARM11_01 data structure. + */ +MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = kzm_map_io, + .init_irq = mx31_init_irq, + .init_machine = kzm_board_init, + .timer = &kzm_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index 1ec679a3c72..b7052914593 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -226,7 +226,7 @@ static struct mc13783_regulator_init_data moboard_regulators[] = { static struct mc13783_platform_data moboard_pmic = { .regulators = moboard_regulators, .num_regulators = ARRAY_SIZE(moboard_regulators), - .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC, + .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | MC13783_USE_ADC, }; diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c index 6ff186e46ce..0bbc65ea23c 100644 --- a/arch/arm/mach-mx3/mx35pdk.c +++ b/arch/arm/mach-mx3/mx35pdk.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/memory.h> #include <linux/gpio.h> +#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -69,6 +70,15 @@ static struct pad_desc mx35pdk_pads[] = { MX35_PAD_FEC_TDATA2__FEC_TDATA_2, MX35_PAD_FEC_RDATA3__FEC_RDATA_3, MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* USBOTG */ + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, +}; + +/* OTG config */ +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; /* @@ -81,6 +91,8 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } static void __init mx35pdk_timer_init(void) diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index 70ab5aff2b9..da6387dcdf2 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -28,7 +28,9 @@ static void __iomem *audmux_base; -#define MXC_AUDMUX_V1_PCR(x) ((x) * 4) +static unsigned char port_mapping[] = { + 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c, +}; int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr) { @@ -37,7 +39,10 @@ int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr) return -ENOSYS; } - writel(pcr, audmux_base + MXC_AUDMUX_V1_PCR(port)); + if (port >= ARRAY_SIZE(port_mapping)) + return -EINVAL; + + writel(pcr, audmux_base + port_mapping[port]); return 0; } diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h new file mode 100644 index 00000000000..05ff2f31ef1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H +#define __ARM_ARCH_BOARD_KZM_ARM11_H + +/* + * KZM-ARM11-01 Board Control Registers on FPGA + */ +#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003) + +/* + * External UART for touch panel on FPGA + */ +#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050) + +#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ + diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 2f6583e185a..eaabd4e9692 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -524,10 +524,18 @@ enum iomux_pins { #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC) #define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC) #define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE) #define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2) #define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2) #define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2) diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h index 6d49f8ae325..011cfcd8b82 100644 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -123,6 +123,7 @@ #define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) #define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) #define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) +#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) extern void mxc_gpio_mode(int gpio_mode); diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index a41bf57fb3d..4d5d395ad63 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -84,6 +84,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_PCM038: case MACH_TYPE_MX21ADS: case MACH_TYPE_PCA100: + case MACH_TYPE_MXT_TD60: uart_base = MX2X_UART1_BASE_ADDR; break; case MACH_TYPE_MX31LITE: |