diff options
-rw-r--r-- | fs/Kconfig | 2 | ||||
-rw-r--r-- | fs/configfs/dir.c | 2 | ||||
-rw-r--r-- | fs/ocfs2/cluster/heartbeat.c | 40 | ||||
-rw-r--r-- | fs/ocfs2/dlm/userdlm.c | 74 | ||||
-rw-r--r-- | fs/ocfs2/file.c | 19 |
5 files changed, 101 insertions, 36 deletions
diff --git a/fs/Kconfig b/fs/Kconfig index e207be68d4c..97f31741312 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -861,7 +861,7 @@ config RAMFS config CONFIGFS_FS tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on SYSFS && EXPERIMENTAL help configfs is a ram-based filesystem that provides the converse of sysfs's functionality. Where sysfs is a filesystem-based diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 8ed9b06a982..5638c8f9362 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -504,7 +504,7 @@ static int populate_groups(struct config_group *group) int ret = 0; int i; - if (group && group->default_groups) { + if (group->default_groups) { /* FYI, we're faking mkdir here * I'm not sure we need this semaphore, as we're called * from our parent's mkdir. That holds our parent's diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index bff0f0d0686..21f38accd03 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -153,6 +153,7 @@ struct o2hb_region { struct o2hb_bio_wait_ctxt { atomic_t wc_num_reqs; struct completion wc_io_complete; + int wc_error; }; static void o2hb_write_timeout(void *arg) @@ -186,6 +187,7 @@ static inline void o2hb_bio_wait_init(struct o2hb_bio_wait_ctxt *wc, { atomic_set(&wc->wc_num_reqs, num_ios); init_completion(&wc->wc_io_complete); + wc->wc_error = 0; } /* Used in error paths too */ @@ -218,8 +220,10 @@ static int o2hb_bio_end_io(struct bio *bio, { struct o2hb_bio_wait_ctxt *wc = bio->bi_private; - if (error) + if (error) { mlog(ML_ERROR, "IO Error %d\n", error); + wc->wc_error = error; + } if (bio->bi_size) return 1; @@ -390,6 +394,8 @@ static int o2hb_read_slots(struct o2hb_region *reg, bail_and_wait: o2hb_wait_on_io(reg, &wc); + if (wc.wc_error && !status) + status = wc.wc_error; if (bios) { for(i = 0; i < num_bios; i++) @@ -790,20 +796,24 @@ static int o2hb_highest_node(unsigned long *nodes, return highest; } -static void o2hb_do_disk_heartbeat(struct o2hb_region *reg) +static int o2hb_do_disk_heartbeat(struct o2hb_region *reg) { int i, ret, highest_node, change = 0; unsigned long configured_nodes[BITS_TO_LONGS(O2NM_MAX_NODES)]; struct bio *write_bio; struct o2hb_bio_wait_ctxt write_wc; - if (o2nm_configured_node_map(configured_nodes, sizeof(configured_nodes))) - return; + ret = o2nm_configured_node_map(configured_nodes, + sizeof(configured_nodes)); + if (ret) { + mlog_errno(ret); + return ret; + } highest_node = o2hb_highest_node(configured_nodes, O2NM_MAX_NODES); if (highest_node >= O2NM_MAX_NODES) { mlog(ML_NOTICE, "ocfs2_heartbeat: no configured nodes found!\n"); - return; + return -EINVAL; } /* No sense in reading the slots of nodes that don't exist @@ -813,7 +823,7 @@ static void o2hb_do_disk_heartbeat(struct o2hb_region *reg) ret = o2hb_read_slots(reg, highest_node + 1); if (ret < 0) { mlog_errno(ret); - return; + return ret; } /* With an up to date view of the slots, we can check that no @@ -831,7 +841,7 @@ static void o2hb_do_disk_heartbeat(struct o2hb_region *reg) ret = o2hb_issue_node_write(reg, &write_bio, &write_wc); if (ret < 0) { mlog_errno(ret); - return; + return ret; } i = -1; @@ -847,6 +857,15 @@ static void o2hb_do_disk_heartbeat(struct o2hb_region *reg) */ o2hb_wait_on_io(reg, &write_wc); bio_put(write_bio); + if (write_wc.wc_error) { + /* Do not re-arm the write timeout on I/O error - we + * can't be sure that the new block ever made it to + * disk */ + mlog(ML_ERROR, "Write error %d on device \"%s\"\n", + write_wc.wc_error, reg->hr_dev_name); + return write_wc.wc_error; + } + o2hb_arm_write_timeout(reg); /* let the person who launched us know when things are steady */ @@ -854,6 +873,8 @@ static void o2hb_do_disk_heartbeat(struct o2hb_region *reg) if (atomic_dec_and_test(®->hr_steady_iterations)) wake_up(&o2hb_steady_queue); } + + return 0; } /* Subtract b from a, storing the result in a. a *must* have a larger @@ -913,7 +934,10 @@ static int o2hb_thread(void *data) * likely to time itself out. */ do_gettimeofday(&before_hb); - o2hb_do_disk_heartbeat(reg); + i = 0; + do { + ret = o2hb_do_disk_heartbeat(reg); + } while (ret && ++i < 2); do_gettimeofday(&after_hb); elapsed_msec = o2hb_elapsed_msecs(&before_hb, &after_hb); diff --git a/fs/ocfs2/dlm/userdlm.c b/fs/ocfs2/dlm/userdlm.c index c3764f4744e..74ca4e5f976 100644 --- a/fs/ocfs2/dlm/userdlm.c +++ b/fs/ocfs2/dlm/userdlm.c @@ -139,6 +139,10 @@ static void user_ast(void *opaque) return; } + mlog_bug_on_msg(lockres->l_requested == LKM_IVMODE, + "Lockres %s, requested ivmode. flags 0x%x\n", + lockres->l_name, lockres->l_flags); + /* we're downconverting. */ if (lockres->l_requested < lockres->l_level) { if (lockres->l_requested <= @@ -229,23 +233,42 @@ static void user_unlock_ast(void *opaque, enum dlm_status status) mlog(0, "UNLOCK AST called on lock %s\n", lockres->l_name); - if (status != DLM_NORMAL) + if (status != DLM_NORMAL && status != DLM_CANCELGRANT) mlog(ML_ERROR, "Dlm returns status %d\n", status); spin_lock(&lockres->l_lock); - if (lockres->l_flags & USER_LOCK_IN_TEARDOWN) + /* The teardown flag gets set early during the unlock process, + * so test the cancel flag to make sure that this ast isn't + * for a concurrent cancel. */ + if (lockres->l_flags & USER_LOCK_IN_TEARDOWN + && !(lockres->l_flags & USER_LOCK_IN_CANCEL)) { lockres->l_level = LKM_IVMODE; - else { + } else if (status == DLM_CANCELGRANT) { + mlog(0, "Lock %s, cancel fails, flags 0x%x\n", + lockres->l_name, lockres->l_flags); + /* We tried to cancel a convert request, but it was + * already granted. Don't clear the busy flag - the + * ast should've done this already. */ + BUG_ON(!(lockres->l_flags & USER_LOCK_IN_CANCEL)); + lockres->l_flags &= ~USER_LOCK_IN_CANCEL; + goto out_noclear; + } else { + BUG_ON(!(lockres->l_flags & USER_LOCK_IN_CANCEL)); + /* Cancel succeeded, we want to re-queue */ + mlog(0, "Lock %s, cancel succeeds, flags 0x%x\n", + lockres->l_name, lockres->l_flags); lockres->l_requested = LKM_IVMODE; /* cancel an * upconvert * request. */ lockres->l_flags &= ~USER_LOCK_IN_CANCEL; /* we want the unblock thread to look at it again * now. */ - __user_dlm_queue_lockres(lockres); + if (lockres->l_flags & USER_LOCK_BLOCKED) + __user_dlm_queue_lockres(lockres); } lockres->l_flags &= ~USER_LOCK_BUSY; +out_noclear: spin_unlock(&lockres->l_lock); wake_up(&lockres->l_event); @@ -268,13 +291,26 @@ static void user_dlm_unblock_lock(void *opaque) spin_lock(&lockres->l_lock); - BUG_ON(!(lockres->l_flags & USER_LOCK_BLOCKED)); - BUG_ON(!(lockres->l_flags & USER_LOCK_QUEUED)); + mlog_bug_on_msg(!(lockres->l_flags & USER_LOCK_QUEUED), + "Lockres %s, flags 0x%x\n", + lockres->l_name, lockres->l_flags); - /* notice that we don't clear USER_LOCK_BLOCKED here. That's - * for user_ast to do. */ + /* notice that we don't clear USER_LOCK_BLOCKED here. If it's + * set, we want user_ast clear it. */ lockres->l_flags &= ~USER_LOCK_QUEUED; + /* It's valid to get here and no longer be blocked - if we get + * several basts in a row, we might be queued by the first + * one, the unblock thread might run and clear the queued + * flag, and finally we might get another bast which re-queues + * us before our ast for the downconvert is called. */ + if (!(lockres->l_flags & USER_LOCK_BLOCKED)) { + mlog(0, "Lockres %s, flags 0x%x: queued but not blocking\n", + lockres->l_name, lockres->l_flags); + spin_unlock(&lockres->l_lock); + goto drop_ref; + } + if (lockres->l_flags & USER_LOCK_IN_TEARDOWN) { mlog(0, "lock is in teardown so we do nothing\n"); spin_unlock(&lockres->l_lock); @@ -282,7 +318,9 @@ static void user_dlm_unblock_lock(void *opaque) } if (lockres->l_flags & USER_LOCK_BUSY) { - mlog(0, "BUSY flag detected...\n"); + mlog(0, "Cancel lock %s, flags 0x%x\n", + lockres->l_name, lockres->l_flags); + if (lockres->l_flags & USER_LOCK_IN_CANCEL) { spin_unlock(&lockres->l_lock); goto drop_ref; @@ -296,14 +334,7 @@ static void user_dlm_unblock_lock(void *opaque) LKM_CANCEL, user_unlock_ast, lockres); - if (status == DLM_CANCELGRANT) { - /* If we got this, then the ast was fired - * before we could cancel. We cleanup our - * state, and restart the function. */ - spin_lock(&lockres->l_lock); - lockres->l_flags &= ~USER_LOCK_IN_CANCEL; - spin_unlock(&lockres->l_lock); - } else if (status != DLM_NORMAL) + if (status != DLM_NORMAL) user_log_dlm_error("dlmunlock", status, lockres); goto drop_ref; } @@ -581,6 +612,14 @@ int user_dlm_destroy_lock(struct user_lock_res *lockres) mlog(0, "asked to destroy %s\n", lockres->l_name); spin_lock(&lockres->l_lock); + if (lockres->l_flags & USER_LOCK_IN_TEARDOWN) { + mlog(0, "Lock is already torn down\n"); + spin_unlock(&lockres->l_lock); + return 0; + } + + lockres->l_flags |= USER_LOCK_IN_TEARDOWN; + while (lockres->l_flags & USER_LOCK_BUSY) { spin_unlock(&lockres->l_lock); @@ -606,7 +645,6 @@ int user_dlm_destroy_lock(struct user_lock_res *lockres) lockres->l_flags &= ~USER_LOCK_ATTACHED; lockres->l_flags |= USER_LOCK_BUSY; - lockres->l_flags |= USER_LOCK_IN_TEARDOWN; spin_unlock(&lockres->l_lock); mlog(0, "unlocking lockres %s\n", lockres->l_name); diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 34e903a6a46..581eb451a41 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -260,6 +260,17 @@ static int ocfs2_truncate_file(struct inode *inode, if (new_i_size == le64_to_cpu(fe->i_size)) goto bail; + /* This forces other nodes to sync and drop their pages. Do + * this even if we have a truncate without allocation change - + * ocfs2 cluster sizes can be much greater than page size, so + * we have to truncate them anyway. */ + status = ocfs2_data_lock(inode, 1); + if (status < 0) { + mlog_errno(status); + goto bail; + } + ocfs2_data_unlock(inode, 1); + if (le32_to_cpu(fe->i_clusters) == ocfs2_clusters_for_bytes(osb->sb, new_i_size)) { mlog(0, "fe->i_clusters = %u, so we do a simple truncate\n", @@ -272,14 +283,6 @@ static int ocfs2_truncate_file(struct inode *inode, goto bail; } - /* This forces other nodes to sync and drop their pages */ - status = ocfs2_data_lock(inode, 1); - if (status < 0) { - mlog_errno(status); - goto bail; - } - ocfs2_data_unlock(inode, 1); - /* alright, we're going to need to do a full blown alloc size * change. Orphan the inode so that recovery can complete the * truncate if necessary. This does the task of marking |