aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/avr32/boards/atngw100/setup.c12
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c7
-rw-r--r--arch/avr32/boards/atstk1000/atstk1003.c3
-rw-r--r--arch/avr32/boards/atstk1000/atstk1004.c6
-rw-r--r--arch/avr32/include/asm/byteorder.h22
-rw-r--r--arch/avr32/include/asm/io.h8
-rw-r--r--arch/avr32/kernel/process.c3
-rw-r--r--arch/avr32/kernel/setup.c19
-rw-r--r--arch/avr32/mach-at32ap/at32ap700x.c394
-rw-r--r--arch/avr32/mach-at32ap/clock.c52
-rw-r--r--arch/avr32/mach-at32ap/clock.h8
-rw-r--r--arch/avr32/mach-at32ap/include/mach/at32ap700x.h128
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h2
-rw-r--r--arch/avr32/mach-at32ap/include/mach/io.h3
-rw-r--r--arch/avr32/mach-at32ap/include/mach/portmux.h5
-rw-r--r--arch/avr32/mach-at32ap/pdc.c3
-rw-r--r--arch/avr32/mach-at32ap/pio.c63
-rw-r--r--arch/avr32/oprofile/Makefile2
-rw-r--r--arch/avr32/oprofile/backtrace.c81
-rw-r--r--arch/avr32/oprofile/op_model_avr32.c4
20 files changed, 578 insertions, 247 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index f3085208959..6c54580a66d 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,7 @@
*/
#include <linux/clk.h>
#include <linux/etherdevice.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
@@ -193,7 +194,7 @@ static int __init atngw100_init(void)
* PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
* but it's not available off-board.
*/
- at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
+ at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
at32_select_gpio(i2c_gpio_data.sda_pin,
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
at32_select_gpio(i2c_gpio_data.scl_pin,
@@ -207,6 +208,15 @@ postcore_initcall(atngw100_init);
static int __init atngw100_arch_init(void)
{
+ /* PB30 is the otherwise unused jumper on the mainboard, with an
+ * external pullup; the jumper grounds it. Use it however you
+ * like, including letting U-Boot or Linux tweak boot sequences.
+ */
+ at32_select_gpio(GPIO_PIN_PB(30), 0);
+ gpio_request(GPIO_PIN_PB(30), "j15");
+ gpio_direction_input(GPIO_PIN_PB(30));
+ gpio_export(GPIO_PIN_PB(30), false);
+
/* set_irq_type() after the arch_initcall for EIC has run, and
* before the I2C subsystem could try using this IRQ.
*/
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 4fedbc4488d..29e5b51a7fd 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -330,13 +330,14 @@ static int __init atstk1002_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, &mci0_pdata);
+ at32_add_device_mci(0, &mci0_data);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
#else
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size, 0);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index acc61235b89..be089d7f37e 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -19,6 +19,7 @@
#include <linux/spi/spi.h>
#include <asm/setup.h>
+#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -94,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index d6a2d02f032..248ef237c16 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -21,6 +21,7 @@
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
+#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -99,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -150,7 +151,8 @@ static int __init atstk1004_init(void)
at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size, 0);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
index d77b48ba733..8e3af02076d 100644
--- a/arch/avr32/include/asm/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
@@ -7,6 +7,9 @@
#include <asm/types.h>
#include <linux/compiler.h>
+#define __BIG_ENDIAN
+#define __SWAB_64_THRU_32__
+
#ifdef __CHECKER__
extern unsigned long __builtin_bswap_32(unsigned long x);
extern unsigned short __builtin_bswap_16(unsigned short x);
@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x);
* the result.
*/
#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
-#define __arch__swab32(x) __builtin_bswap_32(x)
-#define __arch__swab16(x) __builtin_bswap_16(x)
-#endif
+static inline __attribute_const__ __u16 __arch_swab16(__u16 val)
+{
+ return __builtin_bswap_16(val);
+}
+#define __arch_swab16 __arch_swab16
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+ return __builtin_bswap_32(val);
+}
+#define __arch_swab32 __arch_swab32
#endif
-#include <linux/byteorder/big_endian.h>
-
+#include <linux/byteorder.h>
#endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
index a520f77ead9..22c97ef9220 100644
--- a/arch/avr32/include/asm/io.h
+++ b/arch/avr32/include/asm/io.h
@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32)
#define readw_relaxed readw
#define readl_relaxed readl
+#define readb_be __raw_readb
+#define readw_be __raw_readw
+#define readl_be __raw_readl
+
+#define writeb_be __raw_writeb
+#define writew_be __raw_writew
+#define writel_be __raw_writel
+
#define __BUILD_MEMORY_STRING(bwl, type) \
static inline void writes##bwl(volatile void __iomem *addr, \
const void *data, unsigned int count) \
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 2c08ac992ac..134d5302b6d 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -9,6 +9,7 @@
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/fs.h>
+#include <linux/pm.h>
#include <linux/ptrace.h>
#include <linux/reboot.h>
#include <linux/tick.h>
@@ -20,7 +21,7 @@
#include <mach/pm.h>
-void (*pm_power_off)(void) = NULL;
+void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
/*
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index d8e623c426c..5c7083916c3 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p)
}
early_param("fbmem", early_parse_fbmem);
+/*
+ * Pick out the memory size. We look for mem=size@start,
+ * where start and size are "size[KkMmGg]"
+ */
+static int __init early_mem(char *p)
+{
+ resource_size_t size, start;
+
+ start = system_ram->start;
+ size = memparse(p, &p);
+ if (*p == '@')
+ start = memparse(p + 1, &p);
+
+ system_ram->start = start;
+ system_ram->end = system_ram->start + size - 1;
+ return 0;
+}
+early_param("mem", early_mem);
+
static int __init parse_tag_core(struct tag *tag)
{
if (tag->hdr.size > 2) {
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index f1b9a3ac273..813b6844cdf 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -82,8 +82,9 @@ static struct platform_device _name##_id##_device = { \
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
}
-#define select_peripheral(pin, periph, flags) \
- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+#define select_peripheral(port, pin_mask, periph, flags) \
+ at32_select_periph(GPIO_##port##_BASE, pin_mask, \
+ GPIO_##periph, flags)
#define DEV_CLK(_name, devname, bus, _index) \
static struct clk devname##_##_name = { \
@@ -871,6 +872,7 @@ static struct clk atmel_psif1_pclk = {
struct platform_device *__init at32_add_device_psif(unsigned int id)
{
struct platform_device *pdev;
+ u32 pin_mask;
if (!(id == 0 || id == 1))
return NULL;
@@ -881,20 +883,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id)
switch (id) {
case 0:
+ pin_mask = (1 << 8) | (1 << 9); /* CLOCK & DATA */
+
if (platform_device_add_resources(pdev, atmel_psif0_resource,
ARRAY_SIZE(atmel_psif0_resource)))
goto err_add_resources;
atmel_psif0_pclk.dev = &pdev->dev;
- select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
- select_peripheral(PA(9), PERIPH_A, 0); /* DATA */
+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
break;
case 1:
+ pin_mask = (1 << 11) | (1 << 12); /* CLOCK & DATA */
+
if (platform_device_add_resources(pdev, atmel_psif1_resource,
ARRAY_SIZE(atmel_psif1_resource)))
goto err_add_resources;
atmel_psif1_pclk.dev = &pdev->dev;
- select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
- select_peripheral(PB(12), PERIPH_A, 0); /* DATA */
+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
break;
default:
return NULL;
@@ -958,26 +962,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
static inline void configure_usart0_pins(void)
{
- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
+ u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
+
+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
}
static inline void configure_usart1_pins(void)
{
- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
+ u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
+
+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
}
static inline void configure_usart2_pins(void)
{
- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
+ u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
+
+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
}
static inline void configure_usart3_pins(void)
{
- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
+ u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
+
+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
}
static struct platform_device *__initdata at32_usarts[4];
@@ -1057,59 +1065,69 @@ struct platform_device *__init
at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
{
struct platform_device *pdev;
+ u32 pin_mask;
switch (id) {
case 0:
pdev = &macb0_device;
- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
+ pin_mask = (1 << 3); /* TXD0 */
+ pin_mask |= (1 << 4); /* TXD1 */
+ pin_mask |= (1 << 7); /* TXEN */
+ pin_mask |= (1 << 8); /* TXCK */
+ pin_mask |= (1 << 9); /* RXD0 */
+ pin_mask |= (1 << 10); /* RXD1 */
+ pin_mask |= (1 << 13); /* RXER */
+ pin_mask |= (1 << 15); /* RXDV */
+ pin_mask |= (1 << 16); /* MDC */
+ pin_mask |= (1 << 17); /* MDIO */
if (!data->is_rmii) {
- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+ pin_mask |= (1 << 0); /* COL */
+ pin_mask |= (1 << 1); /* CRS */
+ pin_mask |= (1 << 2); /* TXER */
+ pin_mask |= (1 << 5); /* TXD2 */
+ pin_mask |= (1 << 6); /* TXD3 */
+ pin_mask |= (1 << 11); /* RXD2 */
+ pin_mask |= (1 << 12); /* RXD3 */
+ pin_mask |= (1 << 14); /* RXCK */
+ pin_mask |= (1 << 18); /* SPD */
}
+
+ select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
+
break;
case 1:
pdev = &macb1_device;
- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
+ pin_mask = (1 << 13); /* TXD0 */
+ pin_mask |= (1 << 14); /* TXD1 */
+ pin_mask |= (1 << 11); /* TXEN */
+ pin_mask |= (1 << 12); /* TXCK */
+ pin_mask |= (1 << 10); /* RXD0 */
+ pin_mask |= (1 << 6); /* RXD1 */
+ pin_mask |= (1 << 5); /* RXER */
+ pin_mask |= (1 << 4); /* RXDV */
+ pin_mask |= (1 << 3); /* MDC */
+ pin_mask |= (1 << 2); /* MDIO */
+
+ if (!data->is_rmii)
+ pin_mask |= (1 << 15); /* SPD */
+
+ select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
if (!data->is_rmii) {
- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
+ pin_mask = (1 << 19); /* COL */
+ pin_mask |= (1 << 23); /* CRS */
+ pin_mask |= (1 << 26); /* TXER */
+ pin_mask |= (1 << 27); /* TXD2 */
+ pin_mask |= (1 << 28); /* TXD3 */
+ pin_mask |= (1 << 29); /* RXD2 */
+ pin_mask |= (1 << 30); /* RXD3 */
+ pin_mask |= (1 << 24); /* RXCK */
+
+ select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
}
break;
@@ -1177,23 +1195,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
struct platform_device *pdev;
+ u32 pin_mask;
switch (id) {
case 0:
pdev = &atmel_spi0_device;
+ pin_mask = (1 << 1) | (1 << 2); /* MOSI & SCK */
+
/* pullup MISO so a level is always defined */
- select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP);
- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+ select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
at32_spi_setup_slaves(0, b, n, spi0_pins);
break;
case 1:
pdev = &atmel_spi1_device;
+ pin_mask = (1 << 1) | (1 << 5); /* MOSI */
+
/* pullup MISO so a level is always defined */
- select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP);
- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+ select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+
at32_spi_setup_slaves(1, b, n, spi1_pins);
break;
@@ -1226,6 +1249,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
unsigned int n)
{
struct platform_device *pdev;
+ u32 pin_mask;
if (id != 0)
return NULL;
@@ -1238,8 +1262,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
ARRAY_SIZE(atmel_twi0_resource)))
goto err_add_resources;
- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
+ pin_mask = (1 << 6) | (1 << 7); /* SDA & SDL */
+
+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
atmel_twi0_pclk.dev = &pdev->dev;
@@ -1274,6 +1299,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
{
struct platform_device *pdev;
struct dw_dma_slave *dws;
+ u32 pioa_mask;
+ u32 piob_mask;
if (id != 0 || !data)
return NULL;
@@ -1311,17 +1338,17 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
goto fail;
/* CLK line is common to both slots */
- select_peripheral(PA(10), PERIPH_A, 0);
+ pioa_mask = 1 << 10;
switch (data->slot[0].bus_width) {
case 4:
- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+ pioa_mask |= 1 << 13; /* DATA1 */
+ pioa_mask |= 1 << 14; /* DATA2 */
+ pioa_mask |= 1 << 15; /* DATA3 */
/* fall through */
case 1:
- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
+ pioa_mask |= 1 << 11; /* CMD */
+ pioa_mask |= 1 << 12; /* DATA0 */
if (gpio_is_valid(data->slot[0].detect_pin))
at32_select_gpio(data->slot[0].detect_pin, 0);
@@ -1335,15 +1362,19 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
goto fail;
}
+ select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
+ piob_mask = 0;
+
switch (data->slot[1].bus_width) {
case 4:
- select_peripheral(PB(8), PERIPH_B, 0); /* DATA1 */
- select_peripheral(PB(9), PERIPH_B, 0); /* DATA2 */
- select_peripheral(PB(10), PERIPH_B, 0); /* DATA3 */
+ piob_mask |= 1 << 8; /* DATA1 */
+ piob_mask |= 1 << 9; /* DATA2 */
+ piob_mask |= 1 << 10; /* DATA3 */
/* fall through */
case 1:
- select_peripheral(PB(6), PERIPH_B, 0); /* CMD */
- select_peripheral(PB(7), PERIPH_B, 0); /* DATA0 */
+ piob_mask |= 1 << 6; /* CMD */
+ piob_mask |= 1 << 7; /* DATA0 */
+ select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
if (gpio_is_valid(data->slot[1].detect_pin))
at32_select_gpio(data->slot[1].detect_pin, 0);
@@ -1405,13 +1436,14 @@ static struct clk atmel_lcdfb0_pixclk = {
struct platform_device *__init
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len,
- unsigned int pin_config)
+ u64 pin_mask)
{
struct platform_device *pdev;
struct atmel_lcdfb_info *info;
struct fb_monspecs *monspecs;
struct fb_videomode *modedb;
unsigned int modedb_size;
+ u32 portc_mask, portd_mask, porte_mask;
/*
* Do a deep copy of the fb data, monspecs and modedb. Make
@@ -1433,76 +1465,21 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
case 0:
pdev = &atmel_lcdfb0_device;
- switch (pin_config) {
- case 0:
- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
- break;
- case 1:
- select_peripheral(PE(0), PERIPH_B, 0); /* CC */
- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
- select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */
- select_peripheral(PE(2), PERIPH_B, 0); /* MODE */
- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
- select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */
- select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */
- select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */
- select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */
- select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */
- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
- select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */
- select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */
- select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */
- select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */
- select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */
- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
- select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */
- select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */
- select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */
- select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */
- select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */
- select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */
- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
- break;
- default:
- goto err_invalid_id;
- }
+ if (pin_mask == 0ULL)
+ /* Default to "full" lcdc control signals and 24bit */
+ pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
+
+ /* LCDC on port C */
+ portc_mask = (pin_mask & 0xfff80000) >> 19;
+ select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
+
+ /* LCDC on port D */
+ portd_mask = pin_mask & 0x0003ffff;
+ select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
+
+ /* LCDC on port E */
+ porte_mask = (pin_mask >> 32) & 0x0007ffff;
+ select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
@@ -1551,6 +1528,7 @@ static struct clk atmel_pwm0_mck = {
struct platform_device *__init at32_add_device_pwm(u32 mask)
{
struct platform_device *pdev;
+ u32 pin_mask;
if (!mask)
return NULL;
@@ -1566,14 +1544,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask)
if (platform_device_add_data(pdev, &mask, sizeof(mask)))
goto out_free_pdev;
+ pin_mask = 0;
if (mask & (1 << 0))
- select_peripheral(PA(28), PERIPH_A, 0);
+ pin_mask |= (1 << 28);
if (mask & (1 << 1))
- select_peripheral(PA(29), PERIPH_A, 0);
+ pin_mask |= (1 << 29);
+ if (pin_mask > 0)
+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+ pin_mask = 0;
if (mask & (1 << 2))
- select_peripheral(PA(21), PERIPH_B, 0);
+ pin_mask |= (1 << 21);
if (mask & (1 << 3))
- select_peripheral(PA(22), PERIPH_B, 0);
+ pin_mask |= (1 << 22);
+ if (pin_mask > 0)
+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
atmel_pwm0_mck.dev = &pdev->dev;
@@ -1614,52 +1599,65 @@ struct platform_device *__init
at32_add_device_ssc(unsigned int id, unsigned int flags)
{
struct platform_device *pdev;
+ u32 pin_mask = 0;
switch (id) {
case 0:
pdev = &ssc0_device;
if (flags & ATMEL_SSC_RF)
- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
+ pin_mask |= (1 << 21); /* RF */
if (flags & ATMEL_SSC_RK)
- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
+ pin_mask |= (1 << 22); /* RK */
if (flags & ATMEL_SSC_TK)
- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
+ pin_mask |= (1 << 23); /* TK */
if (flags & ATMEL_SSC_TF)
- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
+ pin_mask |= (1 << 24); /* TF */
if (flags & ATMEL_SSC_TD)
- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
+ pin_mask |= (1 << 25); /* TD */
if (flags & ATMEL_SSC_RD)
- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
+ pin_mask |= (1 << 26); /* RD */
+
+ if (pin_mask > 0)
+ select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
break;
case 1:
pdev = &ssc1_device;
if (flags & ATMEL_SSC_RF)
- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
+ pin_mask |= (1 << 0); /* RF */
if (flags & ATMEL_SSC_RK)
- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
+ pin_mask |= (1 << 1); /* RK */
if (flags & ATMEL_SSC_TK)
- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
+ pin_mask |= (1 << 2); /* TK */
if (flags & ATMEL_SSC_TF)
- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
+ pin_mask |= (1 << 3); /* TF */
if (flags & ATMEL_SSC_TD)
- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
+ pin_mask |= (1 << 4); /* TD */
if (flags & ATMEL_SSC_RD)
- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
+ pin_mask |= (1 << 5); /* RD */
+
+ if (pin_mask > 0)
+ select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+
break;
case 2:
pdev = &ssc2_device;
if (flags & ATMEL_SSC_TD)
- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
+ pin_mask |= (1 << 13); /* TD */
if (flags & ATMEL_SSC_RD)
- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
+ pin_mask |= (1 << 14); /* RD */
if (flags & ATMEL_SSC_TK)
- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
+ pin_mask |= (1 << 15); /* TK */
if (flags & ATMEL_SSC_TF)
- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
+ pin_mask |= (1 << 16); /* TF */
if (flags & ATMEL_SSC_RF)
- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
+ pin_mask |= (1 << 17); /* RF */
if (flags & ATMEL_SSC_RK)
- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
+ pin_mask |= (1 << 18); /* RK */
+
+ if (pin_mask > 0)
+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+
break;
default:
return NULL;
@@ -1797,14 +1795,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
unsigned int cs, unsigned int extint)
{
static unsigned int extint_pin_map[4] __initdata = {
- GPIO_PIN_PB(25),
- GPIO_PIN_PB(26),
- GPIO_PIN_PB(27),
- GPIO_PIN_PB(28),
+ (1 << 25),
+ (1 << 26),
+ (1 << 27),
+ (1 << 28),
};
static bool common_pins_initialized __initdata = false;
unsigned int extint_pin;
int ret;
+ u32 pin_mask;
if (extint >= ARRAY_SIZE(extint_pin_map))
return -EINVAL;
@@ -1818,7 +1817,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
if (ret)
return ret;
- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
+ /* NCS4 -> OE_N */
+ select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
break;
case 5:
@@ -1828,7 +1828,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
if (ret)
return ret;
- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
+ /* NCS5 -> OE_N */
+ select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
break;
default:
@@ -1836,14 +1837,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
}
if (!common_pins_initialized) {
- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
+ pin_mask = (1 << 19); /* CFCE1 -> CS0_N */
+ pin_mask |= (1 << 20); /* CFCE2 -> CS1_N */
+ pin_mask |= (1 << 23); /* CFRNW -> DIR */
+ pin_mask |= (1 << 24); /* NWAIT <- IORDY */
+
+ select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
+
common_pins_initialized = true;
}
- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+ select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
pdev->resource[1].start = EIM_IRQ_BASE + extint;
pdev->resource[1].end = pdev->resource[1].start;
@@ -1982,6 +1986,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
{
struct platform_device *pdev;
struct ac97c_platform_data _data;
+ u32 pin_mask;
if (id != 0)
return NULL;
@@ -2008,10 +2013,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
sizeof(struct ac97c_platform_data)))
goto fail;
- select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
- select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
- select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
- select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
+ pin_mask = (1 << 20) | (1 << 21); /* SDO & SYNC */
+ pin_mask |= (1 << 22) | (1 << 23); /* SCLK & SDI */
+
+ select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
if (data->reset_pin != GPIO_PIN_NONE)
@@ -2053,6 +2058,7 @@ static struct clk abdac0_sample_clk = {
struct platform_device *__init at32_add_device_abdac(unsigned int id)
{
struct platform_device *pdev;
+ u32 pin_mask;
if (id != 0)
return NULL;
@@ -2065,10 +2071,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id)
ARRAY_SIZE(abdac0_resource)))
goto err_add_resources;
- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
+ pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */
+ pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */
+
+ select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
abdac0_pclk.dev = &pdev->dev;
abdac0_sample_clk.dev = &pdev->dev;
@@ -2125,7 +2131,7 @@ static struct clk gclk4 = {
.index = 4,
};
-struct clk *at32_clock_list[] = {
+static __initdata struct clk *init_clocks[] = {
&osc32k,
&osc0,
&osc1,
@@ -2189,7 +2195,6 @@ struct clk *at32_clock_list[] = {
&gclk3,
&gclk4,
};
-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
void __init setup_platform(void)
{
@@ -2220,14 +2225,19 @@ void __init setup_platform(void)
genclk_init_parent(&abdac0_sample_clk);
/*
- * Turn on all clocks that have at least one user already, and
- * turn off everything else. We only do this for module
- * clocks, and even though it isn't particularly pretty to
- * check the address of the mode function, it should do the
- * trick...
+ * Build initial dynamic clock list by registering all clocks
+ * from the array.
+ * At the same time, turn on all clocks that have at least one
+ * user already, and turn off everything else. We only do this
+ * for module clocks, and even though it isn't particularly
+ * pretty to check the address of the mode function, it should
+ * do the trick...
*/
- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
- struct clk *clk = at32_clock_list[i];
+ for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
+ struct clk *clk = init_clocks[i];
+
+ /* first, register clock */
+ at32_clk_register(clk);
if (clk->users == 0)
continue;
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 6c27ddac5ad..138a00a2a2d 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -15,24 +15,40 @@
#include <linux/err.h>
#include <linux/device.h>
#include <linux/string.h>
+#include <linux/list.h>
#include <mach/chip.h>
#include "clock.h"
+/* at32 clock list */
+static LIST_HEAD(at32_clock_list);
+
static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(clk_list_lock);
+
+void at32_clk_register(struct clk *clk)
+{
+ spin_lock(&clk_list_lock);
+ /* add the new item to the end of the list */
+ list_add_tail(&clk->list, &at32_clock_list);
+ spin_unlock(&clk_list_lock);
+}
struct clk *clk_get(struct device *dev, const char *id)
{
- int i;
+ struct clk *clk;
- for (i = 0; i < at32_nr_clocks; i++) {
- struct clk *clk = at32_clock_list[i];
+ spin_lock(&clk_list_lock);
- if (clk->dev == dev && strcmp(id, clk->name) == 0)
+ list_for_each_entry(clk, &at32_clock_list, list) {
+ if (clk->dev == dev && strcmp(id, clk->name) == 0) {
+ spin_unlock(&clk_list_lock);
return clk;
+ }
}
+ spin_unlock(&clk_list_lock);
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
@@ -203,8 +219,8 @@ dump_clock(struct clk *parent, struct clkinf *r)
/* cost of this scan is small, but not linear... */
r->nest = nest + NEST_DELTA;
- for (i = 3; i < at32_nr_clocks; i++) {
- clk = at32_clock_list[i];
+
+ list_for_each_entry(clk, &at32_clock_list, list) {
if (clk->parent == parent)
dump_clock(clk, r);
}
@@ -215,6 +231,7 @@ static int clk_show(struct seq_file *s, void *unused)
{
struct clkinf r;
int i;
+ struct clk *clk;
/* show all the power manager registers */
seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
@@ -234,14 +251,25 @@ static int clk_show(struct seq_file *s, void *unused)
seq_printf(s, "\n");
- /* show clock tree as derived from the three oscillators
- * we "know" are at the head of the list
- */
r.s = s;
r.nest = 0;
- dump_clock(at32_clock_list[0], &r);
- dump_clock(at32_clock_list[1], &r);
- dump_clock(at32_clock_list[2], &r);
+ /* protected from changes on the list while dumping */
+ spin_lock(&clk_list_lock);
+
+ /* show clock tree as derived from the three oscillators */
+ clk = clk_get(NULL, "osc32k");
+ dump_clock(clk, &r);
+ clk_put(clk);
+
+ clk = clk_get(NULL, "osc0");
+ dump_clock(clk, &r);
+ clk_put(clk);
+
+ clk = clk_get(NULL, "osc1");
+ dump_clock(clk, &r);
+ clk_put(clk);
+
+ spin_unlock(&clk_list_lock);
return 0;
}
diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
index bb8e1f29583..623bf0e9a1e 100644
--- a/arch/avr32/mach-at32ap/clock.h
+++ b/arch/avr32/mach-at32ap/clock.h
@@ -12,8 +12,13 @@
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
+#include <linux/list.h>
+
+
+void at32_clk_register(struct clk *clk);
struct clk {
+ struct list_head list; /* linking element */
const char *name; /* Clock name/function */
struct device *dev; /* Device the clock is used by */
struct clk *parent; /* Parent clock, if any */
@@ -25,6 +30,3 @@ struct clk {
u16 users; /* Enabled if non-zero */
u16 index; /* Sibling index */
};
-
-extern struct clk *at32_clock_list[];
-extern unsigned int at32_nr_clocks;
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
index 1e9852d65cc..a77d372f6f3 100644
--- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -83,4 +83,132 @@
#define HMATRIX_BASE 0xfff00800
#define SDRAMC_BASE 0xfff03800
+/* LCDC on port C */
+#define ATMEL_LCDC_PC_CC (1ULL << 19)
+#define ATMEL_LCDC_PC_HSYNC (1ULL << 20)
+#define ATMEL_LCDC_PC_PCLK (1ULL << 21)
+#define ATMEL_LCDC_PC_VSYNC (1ULL << 22)
+#define ATMEL_LCDC_PC_DVAL (1ULL << 23)
+#define ATMEL_LCDC_PC_MODE (1ULL << 24)
+#define ATMEL_LCDC_PC_PWR (1ULL << 25)
+#define ATMEL_LCDC_PC_DATA0 (1ULL << 26)
+#define ATMEL_LCDC_PC_DATA1 (1ULL << 27)
+#define ATMEL_LCDC_PC_DATA2 (1ULL << 28)
+#define ATMEL_LCDC_PC_DATA3 (1ULL << 29)
+#define ATMEL_LCDC_PC_DATA4 (1ULL << 30)
+#define ATMEL_LCDC_PC_DATA5 (1ULL << 31)
+
+/* LCDC on port D */
+#define ATMEL_LCDC_PD_DATA6 (1ULL << 0)
+#define ATMEL_LCDC_PD_DATA7 (1ULL << 1)
+#define ATMEL_LCDC_PD_DATA8 (1ULL << 2)
+#define ATMEL_LCDC_PD_DATA9 (1ULL << 3)
+#define ATMEL_LCDC_PD_DATA10 (1ULL << 4)
+#define ATMEL_LCDC_PD_DATA11 (1ULL << 5)
+#define ATMEL_LCDC_PD_DATA12 (1ULL << 6)
+#define ATMEL_LCDC_PD_DATA13 (1ULL << 7)
+#define ATMEL_LCDC_PD_DATA14 (1ULL << 8)
+#define ATMEL_LCDC_PD_DATA15 (1ULL << 9)
+#define ATMEL_LCDC_PD_DATA16 (1ULL << 10)
+#define ATMEL_LCDC_PD_DATA17 (1ULL << 11)
+#define ATMEL_LCDC_PD_DATA18 (1ULL << 12)
+#define ATMEL_LCDC_PD_DATA19 (1ULL << 13)
+#define ATMEL_LCDC_PD_DATA20 (1ULL << 14)
+#define ATMEL_LCDC_PD_DATA21 (1ULL << 15)
+#define ATMEL_LCDC_PD_DATA22 (1ULL << 16)
+#define ATMEL_LCDC_PD_DATA23 (1ULL << 17)
+
+/* LCDC on port E */
+#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0))
+#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1))
+#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2))
+#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3))
+#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4))
+#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5))
+#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6))
+#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7))
+#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8))
+#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9))
+#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10))
+#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11))
+#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12))
+#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13))
+#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14))
+#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15))
+#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16))
+#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17))
+#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18))
+
+
+#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN)
+
+
+#define ATMEL_LCDC_PRI_24B_DATA ( \
+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \
+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \
+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \
+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \
+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \
+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \
+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \
+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \
+ ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \
+ ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \
+ ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \
+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
+
+#define ATMEL_LCDC_ALT_24B_DATA ( \
+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \
+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \
+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \
+ ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \
+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \
+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \
+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \
+ ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \
+ ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \
+ ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \
+ ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \
+ ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23))
+
+#define ATMEL_LCDC_PRI_15B_DATA ( \
+ ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \
+ ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \
+ ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \
+ ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \
+ ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \
+ ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA16) | \
+ ATMEL_LCDC(PD, DATA17) | ATMEL_LCDC(PD, DATA18) | \
+ ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20))
+
+#define ATMEL_LCDC_ALT_15B_DATA ( \
+ ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \
+ ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \
+ ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \
+ ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \
+ ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \
+ ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PE, DATA16) | \
+ ATMEL_LCDC(PE, DATA17) | ATMEL_LCDC(PE, DATA18) | \
+ ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20))
+
+#define ATMEL_LCDC_PRI_CONTROL ( \
+ ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \
+ ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR))
+
+#define ATMEL_LCDC_ALT_CONTROL ( \
+ ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \
+ ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR))
+
+#define ATMEL_LCDC_CONTROL ( \
+ ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \
+ ATMEL_LCDC(PC, PCLK))
+
+#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA)
+
+#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA)
+
+#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA)
+
+#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
+
#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index e60e9076544..c48386d66bc 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -43,7 +43,7 @@ struct atmel_lcdfb_info;
struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len,
- unsigned int pin_config);
+ u64 pin_mask);
struct usba_platform_data;
struct platform_device *
diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
index 4ec6abc68ea..22ea79b7405 100644
--- a/arch/avr32/mach-at32ap/include/mach/io.h
+++ b/arch/avr32/mach-at32ap/include/mach/io.h
@@ -1,8 +1,7 @@
#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
#define __ASM_AVR32_ARCH_AT32AP_IO_H
-/* For "bizarre" halfword swapping */
-#include <linux/byteorder/swabb.h>
+#include <linux/swab.h>
#if defined(CONFIG_AP700X_32_BIT_SMC)
# define __swizzle_addr_b(addr) (addr ^ 3UL)
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
index b1abe6b4e4e..21c79373b53 100644
--- a/arch/avr32/mach-at32ap/include/mach/portmux.h
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -21,9 +21,10 @@
#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
-void at32_select_periph(unsigned int pin, unsigned int periph,
- unsigned long flags);
+void at32_select_periph(unsigned int port, unsigned int pin,
+ unsigned int periph, unsigned long flags);
void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_deselect_pin(unsigned int pin);
void at32_reserve_pin(unsigned int pin);
#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c
index 1040bda4fda..61ab15aae97 100644
--- a/arch/avr32/mach-at32ap/pdc.c
+++ b/arch/avr32/mach-at32ap/pdc.c
@@ -35,7 +35,6 @@ static int __init pdc_probe(struct platform_device *pdev)
}
static struct platform_driver pdc_driver = {
- .probe = pdc_probe,
.driver = {
.name = "pdc",
},
@@ -43,6 +42,6 @@ static struct platform_driver pdc_driver = {
static int __init pdc_init(void)
{
- return platform_driver_register(&pdc_driver);
+ return platform_driver_probe(&pdc_driver, pdc_probe);
}
arch_initcall(pdc_init);
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 405ee6bad4c..ed81a8bcb22 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
}
/* Pin multiplexing API */
+static DEFINE_SPINLOCK(pio_lock);
-void __init at32_select_periph(unsigned int pin, unsigned int periph,
- unsigned long flags)
+void __init at32_select_periph(unsigned int port, u32 pin_mask,
+ unsigned int periph, unsigned long flags)
{
struct pio_device *pio;
- unsigned int pin_index = pin & 0x1f;
- u32 mask = 1 << pin_index;
- pio = gpio_to_pio(pin);
+ /* assign and verify pio */
+ pio = gpio_to_pio(port);
if (unlikely(!pio)) {
- printk("pio: invalid pin %u\n", pin);
+ printk(KERN_WARNING "pio: invalid port %u\n", port);
goto fail;
}
- if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
- || gpiochip_is_requested(&pio->chip, pin_index))) {
- printk("%s: pin %u is busy\n", pio->name, pin_index);
+ /* Test if any of the requested pins is already muxed */
+ spin_lock(&pio_lock);
+ if (unlikely(pio->pinmux_mask & pin_mask)) {
+ printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
+ pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+ spin_unlock(&pio_lock);
goto fail;
}
- pio_writel(pio, PUER, mask);
+ pio->pinmux_mask |= pin_mask;
+
+ /* enable pull ups */
+ pio_writel(pio, PUER, pin_mask);
+
+ /* select either peripheral A or B */
if (periph)
- pio_writel(pio, BSR, mask);
+ pio_writel(pio, BSR, pin_mask);
else
- pio_writel(pio, ASR, mask);
+ pio_writel(pio, ASR, pin_mask);
+
+ /* enable peripheral control */
+ pio_writel(pio, PDR, pin_mask);
- pio_writel(pio, PDR, mask);
+ /* Disable pull ups if not requested. */
if (!(flags & AT32_GPIOF_PULLUP))
- pio_writel(pio, PUDR, mask);
+ pio_writel(pio, PUDR, pin_mask);
+
+ spin_unlock(&pio_lock);
return;
@@ -134,6 +147,25 @@ fail:
dump_stack();
}
+/*
+ * Undo a previous pin reservation. Will not affect the hardware
+ * configuration.
+ */
+void at32_deselect_pin(unsigned int pin)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ dump_stack();
+ return;
+ }
+
+ clear_bit(pin_index, &pio->pinmux_mask);
+}
+
/* Reserve a pin, preventing anyone else from changing its configuration. */
void __init at32_reserve_pin(unsigned int pin)
{
@@ -382,7 +414,6 @@ static int __init pio_probe(struct platform_device *pdev)
}
static struct platform_driver pio_driver = {
- .probe = pio_probe,
.driver = {
.name = "pio",
},
@@ -390,7 +421,7 @@ static struct platform_driver pio_driver = {
static int __init pio_init(void)
{
- return platform_driver_register(&pio_driver);
+ return platform_driver_probe(&pio_driver, pio_probe);
}
postcore_initcall(pio_init);
diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
index 1fe81c3c1e8..e0eb520e028 100644
--- a/arch/avr32/oprofile/Makefile
+++ b/arch/avr32/oprofile/Makefile
@@ -5,4 +5,4 @@ oprofile-y := $(addprefix ../../../drivers/oprofile/, \
event_buffer.o oprofile_files.o \
oprofilefs.o oprofile_stats.o \
timer_int.o)
-oprofile-y += op_model_avr32.o
+oprofile-y += op_model_avr32.o backtrace.o
diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c
new file mode 100644
index 00000000000..75d9ad6f99c
--- /dev/null
+++ b/arch/avr32/oprofile/backtrace.c
@@ -0,0 +1,81 @@
+/*
+ * AVR32 specific backtracing code for oprofile
+ *
+ * Copyright 2008 Weinmann GmbH
+ *
+ * Author: Nikolaus Voss <n.voss@weinmann.de>
+ *
+ * Based on i386 oprofile backtrace code by John Levon and David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+/* The first two words of each frame on the stack look like this if we have
+ * frame pointers */
+struct frame_head {
+ unsigned long lr;
+ struct frame_head *fp;
+};
+
+/* copied from arch/avr32/kernel/process.c */
+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
+{
+ return (p > (unsigned long)tinfo)
+ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
+}
+
+/* copied from arch/x86/oprofile/backtrace.c */
+static struct frame_head *dump_user_backtrace(struct frame_head *head)
+{
+ struct frame_head bufhead[2];
+
+ /* Also check accessibility of one struct frame_head beyond */
+ if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+ return NULL;
+ if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+ return NULL;
+
+ oprofile_add_trace(bufhead[0].lr);
+
+ /* frame pointers should strictly progress back up the stack
+ * (towards higher addresses) */
+ if (bufhead[0].fp <= head)
+ return NULL;
+
+ return bufhead[0].fp;
+}
+
+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+ /* Get first frame pointer */
+ struct frame_head *head = (struct frame_head *)(regs->r7);
+
+ if (!user_mode(regs)) {
+#ifdef CONFIG_FRAME_POINTER
+ /*
+ * Traverse the kernel stack from frame to frame up to
+ * "depth" steps.
+ */
+ while (depth-- && valid_stack_ptr(task_thread_info(current),
+ (unsigned long)head)) {
+ oprofile_add_trace(head->lr);
+ if (head->fp <= head)
+ break;
+ head = head->fp;
+ }
+#endif
+ } else {
+ /* Assume we have frame pointers in user mode process */
+ while (depth-- && head)
+ head = dump_user_backtrace(head);
+ }
+}
+
+
diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
index df42325c7f8..a3e9b3c4845 100644
--- a/arch/avr32/oprofile/op_model_avr32.c
+++ b/arch/avr32/oprofile/op_model_avr32.c
@@ -22,6 +22,8 @@
#define AVR32_PERFCTR_IRQ_GROUP 0
#define AVR32_PERFCTR_IRQ_LINE 1
+void avr32_backtrace(struct pt_regs * const regs, unsigned int depth);
+
enum { PCCNT, PCNT0, PCNT1, NR_counter };
struct avr32_perf_counter {
@@ -223,6 +225,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
memcpy(ops, &avr32_perf_counter_ops,
sizeof(struct oprofile_operations));
+ ops->backtrace = avr32_backtrace;
+
printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
return 0;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 02:37:06 +0000