diff options
209 files changed, 7703 insertions, 2056 deletions
diff --git a/Documentation/networking/LICENSE.qla3xxx b/Documentation/networking/LICENSE.qla3xxx new file mode 100644 index 00000000000..2f2077e34d8 --- /dev/null +++ b/Documentation/networking/LICENSE.qla3xxx @@ -0,0 +1,46 @@ +Copyright (c) 2003-2006 QLogic Corporation +QLogic Linux Networking HBA Driver + +This program includes a device driver for Linux 2.6 that may be +distributed with QLogic hardware specific firmware binary file. +You may modify and redistribute the device driver code under the +GNU General Public License as published by the Free Software +Foundation (version 2 or a later version). + +You may redistribute the hardware specific firmware binary file +under the following terms: + + 1. Redistribution of source code (only if applicable), + must retain the above copyright notice, this list of + conditions and the following disclaimer. + + 2. Redistribution in binary form must reproduce the above + copyright notice, this list of conditions and the + following disclaimer in the documentation and/or other + materials provided with the distribution. + + 3. The name of QLogic Corporation may not be used to + endorse or promote products derived from this software + without specific prior written permission + +REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, +THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT +CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR +OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, +TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN +ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN +COMBINATION WITH THIS PROGRAM. + diff --git a/MAINTAINERS b/MAINTAINERS index c04c25ea314..d13f9857281 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2366,6 +2366,12 @@ M: linux-driver@qlogic.com L: linux-scsi@vger.kernel.org S: Supported +QLOGIC QLA3XXX NETWORK DRIVER +P: Ron Mercer +M: linux-driver@qlogic.com +L: netdev@vger.kernel.org +S: Supported + QNX4 FILESYSTEM P: Anders Larsen M: al@alarsen.net @@ -2901,8 +2907,8 @@ W: http://www.auk.cx/tms380tr/ S: Maintained TULIP NETWORK DRIVER -P: Jeff Garzik -M: jgarzik@pobox.com +P: Valerie Henson +M: val_henson@linux.intel.com L: tulip-users@lists.sourceforge.net W: http://sourceforge.net/projects/tulip/ S: Maintained diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 0de639d6e60..04661fef97f 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -17,6 +17,7 @@ #include <linux/pci.h> #include <linux/init.h> +#include <linux/irq.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index e2a2230b69f..a29b3b2b61b 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/reboot.h> +#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/reboot.h> diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 273e05f2b8d..0eadec91621 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2412 support obj-$(CONFIG_CPU_S3C2412) += s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o # diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h index b0ed9d2d141..be42e4032a6 100644 --- a/arch/arm/mach-s3c2410/cpu.h +++ b/arch/arm/mach-s3c2410/cpu.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 24-Aug-2004 BJD Start of generic S3C24XX support - * 18-Oct-2004 BJD Moved board struct into this file - * 04-Jan-2005 BJD New uart initialisation - * 10-Jan-2005 BJD Moved generic init here, specific to cpu headers - * 14-Jan-2005 BJD Added s3c24xx_init_clocks() call - * 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT - * 14-Mar-2005 BJD Updated for __iomem - * 15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro */ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index ad3845e329b..cae35ff76f3 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -1,22 +1,14 @@ /* linux/arch/arm/mach-s3c2410/devs.c * * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> + * Ben Dooks <ben@simtec.co.uk> * - * Base S3C2410 platform device definitions + * Base S3C24XX platform device definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices - * 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} - * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv - * 29-Aug-2004 BJD Added timers 0 through 3 - * 29-Aug-2004 BJD Changed index of devices we only have one of to -1 - * 21-Aug-2004 BJD Added IRQ_TICK to RTC resources - * 18-Aug-2004 BJD Created initial version */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 6822dc7f779..cd6139b3599 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -86,7 +86,7 @@ unsigned long s3c_irqwake_intmask = 0xffffffffL; unsigned long s3c_irqwake_eintallow = 0x0000fff0L; unsigned long s3c_irqwake_eintmask = 0xffffffffL; -static int +int s3c_irq_wake(unsigned int irqno, unsigned int state) { unsigned long irqbit = 1 << (irqno - IRQ_EINT0); @@ -260,7 +260,7 @@ s3c_irqext_unmask(unsigned int irqno) s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23); } -static int +int s3c_irqext_type(unsigned int irq, unsigned int type) { void __iomem *extint_reg; diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h index 4abf0ca14e0..f7cc4c983de 100644 --- a/arch/arm/mach-s3c2410/irq.h +++ b/arch/arm/mach-s3c2410/irq.h @@ -97,3 +97,8 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) __raw_writel(parentmask, S3C2410_INTPND); } } + +/* exported for use in arch/arm/mach-s3c2410 */ + +extern int s3c_irq_wake(unsigned int irqno, unsigned int state); +extern int s3c_irqext_type(unsigned int irq, unsigned int type); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 947234df816..2968fb235f9 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -8,31 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 14-Sep-2004 BJD USB power control - * 20-Aug-2004 BJD Added s3c2410_board struct - * 18-Aug-2004 BJD Added platform devices from default set - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to v2.6 kernel - * 06-Jan-2003 BJD Updates for <arch/map.h> - * 18-Jan-2003 BJD Added serial port configuration - * 05-Oct-2004 BJD Power management code - * 04-Nov-2004 BJD Updated serial port clocks - * 04-Jan-2005 BJD New uart init call - * 10-Jan-2005 BJD Removed include of s3c2410.h - * 14-Jan-2005 BJD Add support for muitlple NAND devices - * 03-Mar-2005 BJD Ensured that bast-cpld.h is included - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 14-Mar-2005 BJD Updated for __iomem changes - * 22-Jun-2005 BJD Added DM9000 platform information - * 28-Jun-2005 BJD Moved pm functionality out to common code - * 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s - * 25-Jul-2005 BJD Removed ASIX static mappings - * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus - * 20-Sep-2005 BJD Added static to non-exported items - * 26-Oct-2005 BJD Added FB platform data */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index aec431b2830..8c895c077d2 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -9,23 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 16-May-2003 BJD Created initial version - * 16-Aug-2003 BJD Fixed header files and copyright, added URL - * 05-Sep-2003 BJD Moved to v2.6 kernel - * 06-Jan-2003 BJD Updates for <arch/map.h> - * 18-Jan-2003 BJD Added serial port configuration - * 17-Feb-2003 BJD Copied to mach-ipaq.c - * 21-Aug-2004 BJD Added struct s3c2410_board - * 04-Sep-2004 BJD Changed uart init, renamed ipaq_ -> h1940_ - * 18-Oct-2004 BJD Updated new board structure name - * 04-Nov-2004 BJD Change for new serial clock - * 04-Jan-2005 BJD Updated uart init call - * 10-Jan-2005 BJD Removed include of s3c2410.h - * 14-Jan-2005 BJD Added clock init - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 20-Sep-2005 BJD Added static to non-exported items - * 26-Oct-2005 BJD Changed name of fb init call */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 306afc1d7cd..23d7c052013 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 16-Sep-2004 BJD Copied from mach-h1940.c - * 25-Oct-2004 BJD Updates for 2.6.10-rc1 - * 10-Jan-2005 BJD Removed include of s3c2410.h s3c2440.h - * 14-Jan-2005 BJD Added new clock init - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 14-Mar-2005 BJD Fixed __iomem warnings - * 20-Sep-2005 BJD Added static to non-exported items - * 31-Oct-2005 BJD Added LCD setup for framebuffer */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 25f7e9f4dce..b3b0171d505 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -27,10 +27,6 @@ * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by * Ben Dooks <ben@simtec.co.uk> * - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 20-Sep-2005 BJD Added static to non-exported items - * 01-Apr-2006 BJD Moved init code to common smdk - * ***********************************************************************/ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c index b7ef7d3c54a..3a4ca7f6f7b 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2413.c +++ b/arch/arm/mach-s3c2410/mach-smdk2413.c @@ -112,7 +112,20 @@ static void __init smdk2413_machine_init(void) smdk_machine_init(); } -MACHINE_START(S3C2413, "SMDK2413") +MACHINE_START(S3C2413, "S3C2413") + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .fixup = smdk2413_fixup, + .init_irq = s3c24xx_init_irq, + .map_io = smdk2413_map_io, + .init_machine = smdk2413_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END + +MACHINE_START(SMDK2413, "SMDK2413") /* Maintainer: Ben Dooks <ben@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index d18efb279d3..a0d7692cdb2 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -10,25 +10,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 14-Sep-2004 BJD USB Power control - * 04-Sep-2004 BJD Added new uart init, and io init - * 21-Aug-2004 BJD Added struct s3c2410_board - * 06-Aug-2004 BJD Fixed call to time initialisation - * 05-Apr-2004 BJD Copied to make mach-vr1000.c - * 18-Oct-2004 BJD Updated board struct - * 04-Nov-2004 BJD Clock and serial configuration update - * - * 04-Jan-2005 BJD Updated uart init call - * 10-Jan-2005 BJD Removed include of s3c2410.h - * 14-Jan-2005 BJD Added clock init - * 15-Jan-2005 BJD Add serial port device definition - * 20-Jan-2005 BJD Use UPF_IOREMAP for ports - * 10-Feb-2005 BJD Added power-off capability - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 14-Mar-2006 BJD void __iomem fixes - * 22-Jun-2006 BJD Added DM9000 platform information - * 20-Sep-2005 BJD Added static to non-exported items */ #include <linux/kernel.h> diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2410/s3c2400-gpio.c index 5127f39fa9b..f2a78175a70 100644 --- a/arch/arm/mach-s3c2410/s3c2400-gpio.c +++ b/arch/arm/mach-s3c2410/s3c2400-gpio.c @@ -17,10 +17,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog - * 15-Jan-2006 LCVR Splitted from gpio.c, adding support for the S3C2400 - */ +*/ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-s3c2410/s3c2410.h b/arch/arm/mach-s3c2410/s3c2410.h index 73f1a2474a6..fbed084f26d 100644 --- a/arch/arm/mach-s3c2410/s3c2410.h +++ b/arch/arm/mach-s3c2410/s3c2410.h @@ -9,14 +9,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Modifications: - * 18-Aug-2004 BJD Created initial version - * 20-Aug-2004 BJD Added s3c2410_board struct - * 04-Sep-2004 BJD Added s3c2410_init_uarts() call - * 17-Oct-2004 BJD Moved board out to cpu - * 04-Jan-2005 BJD Changed uart init - * 10-Jan-2005 BJD Removed timer to cpu.h, moved 2410 specific bits here - * 14-Jan-2005 BJD Added s3c2410_init_clocks call */ #ifdef CONFIG_CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c new file mode 100644 index 00000000000..c80ec93dfea --- /dev/null +++ b/arch/arm/mach-s3c2410/s3c2412-irq.c @@ -0,0 +1,130 @@ +/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/ptrace.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/mach/irq.h> + +#include <asm/arch/regs-irq.h> +#include <asm/arch/regs-gpio.h> + +#include "cpu.h" +#include "irq.h" + +/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by + * having them turn up in both the INT* and the EINT* registers. Whilst + * both show the status, they both now need to be acked when the IRQs + * go off. +*/ + +static void +s3c2412_irq_mask(unsigned int irqno) +{ + unsigned long bitval = 1UL << (irqno - IRQ_EINT0); + unsigned long mask; + + mask = __raw_readl(S3C2410_INTMSK); + __raw_writel(mask | bitval, S3C2410_INTMSK); + + mask = __raw_readl(S3C2412_EINTMASK); + __raw_writel(mask | bitval, S3C2412_EINTMASK); +} + +static inline void +s3c2412_irq_ack(unsigned int irqno) +{ + unsigned long bitval = 1UL << (irqno - IRQ_EINT0); + + __raw_writel(bitval, S3C2412_EINTPEND); + __raw_writel(bitval, S3C2410_SRCPND); + __raw_writel(bitval, S3C2410_INTPND); +} + +static inline void +s3c2412_irq_maskack(unsigned int irqno) +{ + unsigned long bitval = 1UL << (irqno - IRQ_EINT0); + unsigned long mask; + + mask = __raw_readl(S3C2410_INTMSK); + __raw_writel(mask|bitval, S3C2410_INTMSK); + + mask = __raw_readl(S3C2412_EINTMASK); + __raw_writel(mask | bitval, S3C2412_EINTMASK); + + __raw_writel(bitval, S3C2412_EINTPEND); + __raw_writel(bitval, S3C2410_SRCPND); + __raw_writel(bitval, S3C2410_INTPND); +} + +static void +s3c2412_irq_unmask(unsigned int irqno) +{ + unsigned long bitval = 1UL << (irqno - IRQ_EINT0); + unsigned long mask; + + mask = __raw_readl(S3C2412_EINTMASK); + __raw_writel(mask & ~bitval, S3C2412_EINTMASK); + + mask = __raw_readl(S3C2410_INTMSK); + __raw_writel(mask & ~bitval, S3C2410_INTMSK); +} + +static struct irqchip s3c2412_irq_eint0t4 = { + .ack = s3c2412_irq_ack, + .mask = s3c2412_irq_mask, + .unmask = s3c2412_irq_unmask, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, +}; + +static int s3c2412_irq_add(struct sys_device *sysdev) +{ + unsigned int irqno; + + for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { + set_irq_chip(irqno, &s3c2412_irq_eint0t4); + set_irq_handler(irqno, do_edge_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static struct sysdev_driver s3c2412_irq_driver = { + .add = s3c2412_irq_add, +}; + +static int s3c2412_irq_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver); +} + +arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c index acfe3870727..1667ba1fa43 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -17,9 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * Changelog: - * 25-Jul-2005 BJD Split from irq.c - * */ #include <linux/init.h> diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c index 2aadca1ce7e..44c5affa9b8 100644 --- a/arch/arm/mach-s3c2410/s3c244x-irq.c +++ b/arch/arm/mach-s3c2410/s3c244x-irq.c @@ -17,9 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * Changelog: - * 25-Jul-2005 BJD Split from irq.c - * */ #include <linux/init.h> @@ -122,21 +119,24 @@ static int s3c244x_irq_add(struct sys_device *sysdev) return 0; } -static struct sysdev_driver s3c244x_irq_driver = { +static struct sysdev_driver s3c2440_irq_driver = { .add = s3c244x_irq_add, }; static int s3c2440_irq_init(void) { - return sysdev_driver_register(&s3c2440_sysclass, &s3c244x_irq_driver); + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver); } arch_initcall(s3c2440_irq_init); +static struct sysdev_driver s3c2442_irq_driver = { + .add = s3c244x_irq_add, +}; static int s3c2442_irq_init(void) { - return sysdev_driver_register(&s3c2442_sysclass, &s3c244x_irq_driver); + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver); } arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 1e89d408047..44a7a652d62 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -480,7 +480,7 @@ __arm926_proc_info: b __arm926_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA .long cpu_arm926_name .long arm926_processor_functions .long v4wbi_tlb_fns diff --git a/arch/i386/kernel/audit.c b/arch/i386/kernel/audit.c index 5a53c6f371f..3b97cff4154 100644 --- a/arch/i386/kernel/audit.c +++ b/arch/i386/kernel/audit.c @@ -8,13 +8,41 @@ static unsigned dir_class[] = { ~0U }; +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + static unsigned chattr_class[] = { #include <asm-generic/audit_change_attr.h> ~0U }; +int audit_classify_syscall(int abi, unsigned syscall) +{ + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 0; + } +} + static int __init audit_classes_init(void) { + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); return 0; diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c index ab94f2e58cd..92d7d0c8d93 100644 --- a/arch/ia64/ia32/audit.c +++ b/arch/ia64/ia32/audit.c @@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = { #include <asm-generic/audit_change_attr.h> ~0U }; + +unsigned ia32_write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +unsigned ia32_read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +int ia32_classify_syscall(unsigned syscall) +{ + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 1; + } +} diff --git a/arch/ia64/kernel/audit.c b/arch/ia64/kernel/audit.c index f2512931cca..04682555a28 100644 --- a/arch/ia64/kernel/audit.c +++ b/arch/ia64/kernel/audit.c @@ -8,19 +8,54 @@ static unsigned dir_class[] = { ~0U }; +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + static unsigned chattr_class[] = { #include <asm-generic/audit_change_attr.h> ~0U }; +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_IA32_SUPPORT + extern int ia32_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_I386) + return ia32_classify_syscall(syscall); +#endif + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_execve: + return 5; + default: + return 0; + } +} + static int __init audit_classes_init(void) { #ifdef CONFIG_IA32_SUPPORT extern __u32 ia32_dir_class[]; + extern __u32 ia32_write_class[]; + extern __u32 ia32_read_class[]; extern __u32 ia32_chattr_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class); + audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class); audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class); audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class); #endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); return 0; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 956c2e5564b..7d32ad0194a 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -70,6 +70,8 @@ obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y) kexec-$(CONFIG_PPC64) := machine_kexec_64.o kexec-$(CONFIG_PPC32) := machine_kexec_32.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y) +obj-$(CONFIG_AUDIT) += audit.o +obj64-$(CONFIG_AUDIT) += compat_audit.o ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s diff --git a/arch/powerpc/kernel/audit.c b/arch/powerpc/kernel/audit.c new file mode 100644 index 00000000000..7fe5e6300e9 --- /dev/null +++ b/arch/powerpc/kernel/audit.c @@ -0,0 +1,66 @@ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/audit.h> +#include <asm/unistd.h> + +static unsigned dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +static unsigned chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_PPC64 + extern int ppc32_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_PPC) + return ppc32_classify_syscall(syscall); +#endif + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 0; + } +} + +static int __init audit_classes_init(void) +{ +#ifdef CONFIG_PPC64 + extern __u32 ppc32_dir_class[]; + extern __u32 ppc32_write_class[]; + extern __u32 ppc32_read_class[]; + extern __u32 ppc32_chattr_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class); + audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class); + audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class); +#endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); + audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); + return 0; +} + +__initcall(audit_classes_init); diff --git a/arch/powerpc/kernel/compat_audit.c b/arch/powerpc/kernel/compat_audit.c new file mode 100644 index 00000000000..640d4bb2932 --- /dev/null +++ b/arch/powerpc/kernel/compat_audit.c @@ -0,0 +1,38 @@ +#undef __powerpc64__ +#include <asm/unistd.h> + +unsigned ppc32_dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +unsigned ppc32_chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +unsigned ppc32_write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +unsigned ppc32_read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +int ppc32_classify_syscall(unsigned syscall) +{ + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 1; + } +} diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 86601a94570..9a33ed6ca69 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -16,9 +16,11 @@ extra-y += head.o init_task.o vmlinux.lds obj-$(CONFIG_MODULES) += s390_ksyms.o module.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_AUDIT) += audit.o +compat-obj-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_COMPAT) += compat_linux.o compat_signal.o \ compat_wrapper.o compat_exec_domain.o \ - binfmt_elf32.o + binfmt_elf32.o $(compat-obj-y) obj-$(CONFIG_VIRT_TIMER) += vtime.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/s390/kernel/audit.c b/arch/s390/kernel/audit.c new file mode 100644 index 00000000000..0741d919339 --- /dev/null +++ b/arch/s390/kernel/audit.c @@ -0,0 +1,66 @@ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/audit.h> +#include <asm/unistd.h> + +static unsigned dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +static unsigned chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_COMPAT + extern int s390_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_S390) + return s390_classify_syscall(syscall); +#endif + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 0; + } +} + +static int __init audit_classes_init(void) +{ +#ifdef CONFIG_COMPAT + extern __u32 s390_dir_class[]; + extern __u32 s390_write_class[]; + extern __u32 s390_read_class[]; + extern __u32 s390_chattr_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, s390_write_class); + audit_register_class(AUDIT_CLASS_READ_32, s390_read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE_32, s390_dir_class); + audit_register_class(AUDIT_CLASS_CHATTR_32, s390_chattr_class); +#endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); + audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); + return 0; +} + +__initcall(audit_classes_init); diff --git a/arch/s390/kernel/compat_audit.c b/arch/s390/kernel/compat_audit.c new file mode 100644 index 00000000000..16d9436bfa9 --- /dev/null +++ b/arch/s390/kernel/compat_audit.c @@ -0,0 +1,38 @@ +#undef __s390x__ +#include <asm/unistd.h> + +unsigned s390_dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +unsigned s390_chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +unsigned s390_write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +unsigned s390_read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +int s390_classify_syscall(unsigned syscall) +{ + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 1; + } +} diff --git a/arch/x86_64/ia32/audit.c b/arch/x86_64/ia32/audit.c index ab94f2e58cd..92d7d0c8d93 100644 --- a/arch/x86_64/ia32/audit.c +++ b/arch/x86_64/ia32/audit.c @@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = { #include <asm-generic/audit_change_attr.h> ~0U }; + +unsigned ia32_write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +unsigned ia32_read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +int ia32_classify_syscall(unsigned syscall) +{ + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 1; + } +} diff --git a/arch/x86_64/kernel/audit.c b/arch/x86_64/kernel/audit.c index a067aa468a8..21f33387bef 100644 --- a/arch/x86_64/kernel/audit.c +++ b/arch/x86_64/kernel/audit.c @@ -8,19 +8,54 @@ static unsigned dir_class[] = { ~0U }; +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + static unsigned chattr_class[] = { #include <asm-generic/audit_change_attr.h> ~0U }; +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_IA32_EMULATION + extern int ia32_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_I386) + return ia32_classify_syscall(syscall); +#endif + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_execve: + return 5; + default: + return 0; + } +} + static int __init audit_classes_init(void) { #ifdef CONFIG_IA32_EMULATION extern __u32 ia32_dir_class[]; + extern __u32 ia32_write_class[]; + extern __u32 ia32_read_class[]; extern __u32 ia32_chattr_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class); + audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class); audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class); audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class); #endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); return 0; diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index a7c725f8bf6..f286079d233 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -425,12 +425,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi return d->init_setup(dev, d); } -static const struct pci_device_id aec62xx_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 }, +static struct pci_device_id aec62xx_pci_tbl[] = { + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 03677bff0d7..f063d954236 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -649,11 +649,11 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device } static struct pci_device_id svwks_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { 0, }, }; MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 25ceb4a39ed..20b392948f3 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1082,10 +1082,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi } static struct pci_device_id siimage_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, #ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1}, - { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, #endif { 0, }, }; diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig index a4f7288a1fc..3ef567b99c7 100644 --- a/drivers/isdn/i4l/Kconfig +++ b/drivers/isdn/i4l/Kconfig @@ -5,6 +5,7 @@ config ISDN_PPP bool "Support synchronous PPP" depends on INET + select SLHC help Over digital connections such as ISDN, there is no need to synchronize sender and recipient's clocks with start and stop bits diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 7ca9e95bdf8..fb6565b98f3 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -91,6 +91,8 @@ struct imxmci_host { int dma_allocated; unsigned char actual_bus_width; + + int prev_cmd_code; }; #define IMXMCI_PEND_IRQ_b 0 @@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) * partial FIFO fills and reads. The length has to be rounded up to burst size multiple. * This is required for SCR read at least. */ - if (datasz < 64) { + if (datasz < 512) { host->dma_size = datasz; if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; /* Hack to enable read SCR */ - if(datasz < 16) { - MMC_NOB = 1; - MMC_BLK_LEN = 16; - } + MMC_NOB = 1; + MMC_BLK_LEN = 512; } else { host->dma_dir = DMA_TO_DEVICE; } @@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request * spin_unlock_irqrestore(&host->lock, flags); + if(req && req->cmd) + host->prev_cmd_code = req->cmd->opcode; + host->req = NULL; host->cmd = NULL; host->data = NULL; @@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) { int i; int burst_len; - int flush_len; int trans_done = 0; unsigned int stat = *pstat; @@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n", stat); + udelay(20); /* required for clocks < 8MHz*/ + if(host->dma_dir == DMA_FROM_DEVICE) { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE, - 20, "imxmci_cpu_driven_data read"); + 50, "imxmci_cpu_driven_data read"); while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && - (host->data_cnt < host->dma_size)) { - if(burst_len >= host->dma_size - host->data_cnt) { - flush_len = burst_len; - burst_len = host->dma_size - host->data_cnt; - flush_len -= burst_len; - host->data_cnt = host->dma_size; - trans_done = 1; - } else { - flush_len = 0; - host->data_cnt += burst_len; - } + (host->data_cnt < 512)) { + + udelay(20); /* required for clocks < 8MHz*/ for(i = burst_len; i>=2 ; i-=2) { - *(host->data_ptr++) = MMC_BUFFER_ACCESS; - udelay(20); /* required for clocks < 8MHz*/ + u16 data; + data = MMC_BUFFER_ACCESS; + udelay(10); /* required for clocks < 8MHz*/ + if(host->data_cnt+2 <= host->dma_size) { + *(host->data_ptr++) = data; + } else { + if(host->data_cnt < host->dma_size) + *(u8*)(host->data_ptr) = data; + } + host->data_cnt += 2; } - if(i == 1) - *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS; - stat = MMC_STATUS; - /* Flush extra bytes from FIFO */ - while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){ - i = MMC_BUFFER_ACCESS; - stat = MMC_STATUS; - stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */ - } - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n", - burst_len, stat); + dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", + host->data_cnt, burst_len, stat); } + + if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) + trans_done = 1; + + if(host->dma_size & 0x1ff) + stat &= ~STATUS_CRC_READ_ERR; + } else { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FE, @@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data) what, stat, MMC_INT_MASK); dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma)); - dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n", - host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size); + dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", + host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size); } if(!host->present || timeout) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 33525bdf2ab..74eaaee66de 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca, EXPORT_SYMBOL(mmc_wait_for_app_cmd); +/** + * mmc_set_data_timeout - set the timeout for a data command + * @data: data phase for command + * @card: the MMC card associated with the data transfer + * @write: flag to differentiate reads from writes + */ +void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card, + int write) +{ + unsigned int mult; + + /* + * SD cards use a 100 multiplier rather than 10 + */ + mult = mmc_card_sd(card) ? 100 : 10; + + /* + * Scale up the multiplier (and therefore the timeout) by + * the r2w factor for writes. + */ + if (write) + mult <<= card->csd.r2w_factor; + + data->timeout_ns = card->csd.tacc_ns * mult; + data->timeout_clks = card->csd.tacc_clks * mult; + + /* + * SD cards also have an upper limit on the timeout. + */ + if (mmc_card_sd(card)) { + unsigned int timeout_us, limit_us; + + timeout_us = data->timeout_ns / 1000; + timeout_us += data->timeout_clks * 1000 / + (card->host->ios.clock / 1000); + + if (write) + limit_us = 250000; + else + limit_us = 100000; + + if (timeout_us > limit_us) { + data->timeout_ns = limit_us * 1000; + data->timeout_clks = 0; + } + } +} +EXPORT_SYMBOL(mmc_set_data_timeout); + static int mmc_select_card(struct mmc_host *host, struct mmc_card *card); /** @@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host) { int err; struct mmc_card *card; - struct mmc_request mrq; struct mmc_command cmd; struct mmc_data data; - struct scatterlist sg; list_for_each_entry(card, &host->cards, node) { @@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host) memset(&data, 0, sizeof(struct mmc_data)); - data.timeout_ns = card->csd.tacc_ns * 10; - data.timeout_clks = card->csd.tacc_clks * 10; + mmc_set_data_timeout(&data, card, 0); + data.blksz_bits = 3; data.blksz = 1 << 3; data.blocks = 1; diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 115cc21094b..a0e0dad1b41 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -30,6 +30,7 @@ #include <linux/mutex.h> #include <linux/mmc/card.h> +#include <linux/mmc/host.h> #include <linux/mmc/protocol.h> #include <asm/system.h> @@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.cmd.arg = req->sector << 9; brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; - brq.data.timeout_ns = card->csd.tacc_ns * 10; - brq.data.timeout_clks = card->csd.tacc_clks * 10; brq.data.blksz_bits = md->block_bits; brq.data.blksz = 1 << md->block_bits; brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); @@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.stop.arg = 0; brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC; + mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ); + if (rq_data_dir(req) == READ) { brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK; brq.data.flags |= MMC_DATA_READ; @@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.cmd.opcode = MMC_WRITE_BLOCK; brq.data.flags |= MMC_DATA_WRITE; brq.data.blocks = 1; - - /* - * Scale up the timeout by the r2w factor - */ - brq.data.timeout_ns <<= card->csd.r2w_factor; - brq.data.timeout_clks <<= card->csd.r2w_factor; } if (brq.data.blocks > 1) { @@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) md->read_only = mmc_blk_readonly(card); /* - * Figure out a workable block size. MMC cards have: - * - two block sizes, one for read and one for write. - * - may support partial reads and/or writes - * (allows block sizes smaller than specified) - */ - md->block_bits = card->csd.read_blkbits; - if (card->csd.write_blkbits != card->csd.read_blkbits) { - if (card->csd.write_blkbits < card->csd.read_blkbits && - card->csd.read_partial) { - /* - * write block size is smaller than read block - * size, but we support partial reads, so choose - * the smaller write block size. - */ - md->block_bits = card->csd.write_blkbits; - } else if (card->csd.write_blkbits > card->csd.read_blkbits && - card->csd.write_partial) { - /* - * read block size is smaller than write block - * size, but we support partial writes. Use read - * block size. - */ - } else { - /* - * We don't support this configuration for writes. - */ - printk(KERN_ERR "%s: unable to select block size for " - "writing (rb%u wb%u rp%u wp%u)\n", - mmc_card_id(card), - 1 << card->csd.read_blkbits, - 1 << card->csd.write_blkbits, - card->csd.read_partial, - card->csd.write_partial); - md->read_only = 1; - } - } - - /* - * Refuse to allow block sizes smaller than 512 bytes. + * Both SD and MMC specifications state (although a bit + * unclearly in the MMC case) that a block size of 512 + * bytes must always be supported by the card. */ - if (md->block_bits < 9) { - printk(KERN_ERR "%s: unable to support block size %u\n", - mmc_card_id(card), 1 << md->block_bits); - ret = -EINVAL; - goto err_kfree; - } + md->block_bits = 9; md->disk = alloc_disk(1 << MMC_SHIFT); if (md->disk == NULL) { diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c index 07136ec423b..d7b115a3596 100644 --- a/drivers/net/3c501.c +++ b/drivers/net/3c501.c @@ -120,7 +120,6 @@ static const char version[] = #include <linux/slab.h> #include <linux/string.h> #include <linux/errno.h> -#include <linux/config.h> /* for CONFIG_IP_MULTICAST */ #include <linux/spinlock.h> #include <linux/ethtool.h> #include <linux/delay.h> diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 80e8ca013e4..7c23813bb09 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -3169,7 +3169,7 @@ static int __init vortex_init(void) { int pci_rc, eisa_rc; - pci_rc = pci_module_init(&vortex_driver); + pci_rc = pci_register_driver(&vortex_driver); eisa_rc = vortex_eisa_init(); if (pci_rc == 0) diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 1428bb7715a..4c2e76326c4 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -2098,7 +2098,7 @@ static int __init cp_init (void) #ifdef MODULE printk("%s", version); #endif - return pci_module_init (&cp_driver); + return pci_register_driver(&cp_driver); } static void __exit cp_exit (void) diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index e4f4eaff767..2a707747ed8 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -2629,7 +2629,7 @@ static int __init rtl8139_init_module (void) printk (KERN_INFO RTL8139_DRIVER_NAME "\n"); #endif - return pci_module_init (&rtl8139_pci_driver); + return pci_register_driver(&rtl8139_pci_driver); } diff --git a/drivers/net/8390.c b/drivers/net/8390.c index d2935ae3981..3eb7048684a 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -299,7 +299,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * Slow phase with lock held. */ - disable_irq_nosync(dev->irq); + disable_irq_nosync_lockdep(dev->irq); spin_lock(&ei_local->page_lock); @@ -338,7 +338,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); spin_unlock(&ei_local->page_lock); - enable_irq(dev->irq); + enable_irq_lockdep(dev->irq); ei_local->stat.tx_errors++; return 1; } @@ -379,7 +379,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) outb_p(ENISR_ALL, e8390_base + EN0_IMR); spin_unlock(&ei_local->page_lock); - enable_irq(dev->irq); + enable_irq_lockdep(dev->irq); dev_kfree_skb (skb); ei_local->stat.tx_bytes += send_length; @@ -505,9 +505,9 @@ irqreturn_t ei_interrupt(int irq, void *dev_id, struct pt_regs * regs) #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev) { - disable_irq(dev->irq); + disable_irq_lockdep(dev->irq); ei_interrupt(dev->irq, dev, NULL); - enable_irq(dev->irq); + enable_irq_lockdep(dev->irq); } #endif diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a2bd8119270..de4f9e1f2ca 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1411,6 +1411,22 @@ config FORCEDETH <file:Documentation/networking/net-modules.txt>. The module will be called forcedeth. +config FORCEDETH_NAPI + bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + depends on FORCEDETH && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. config CS89x0 tristate "CS89x0 support" @@ -2290,6 +2306,15 @@ config MV643XX_ETH_2 This enables support for Port 2 of the Marvell MV643XX Gigabit Ethernet. +config QLA3XXX + tristate "QLogic QLA3XXX Network Driver Support" + depends on PCI + help + This driver supports QLogic ISP3XXX gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called qla3xxx. + endmenu # @@ -2550,6 +2575,7 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" + select SLHC ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2730,6 +2756,7 @@ config SLIP config SLIP_COMPRESSED bool "CSLIP compressed headers" depends on SLIP + select SLHC ---help--- This protocol is faster than SLIP because it uses compression on the TCP/IP headers (not on the data itself), but it has to be supported @@ -2742,6 +2769,12 @@ config SLIP_COMPRESSED <http://www.tldp.org/docs.html#howto>, explains how to configure CSLIP. This won't enlarge your kernel. +config SLHC + tristate + help + This option enables Van Jacobsen serial line header compression + routines. + config SLIP_SMART bool "Keepalive and linefill" depends on SLIP diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 8427bf9dec9..6ff17649c0f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -2,10 +2,6 @@ # Makefile for the Linux network (ethercard) device drivers. # -ifeq ($(CONFIG_ISDN_PPP),y) - obj-$(CONFIG_ISDN) += slhc.o -endif - obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ @@ -113,8 +109,9 @@ obj-$(CONFIG_FORCEDETH) += forcedeth.o obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o +obj-$(CONFIG_QLA3XXX) += qla3xxx.o -obj-$(CONFIG_PPP) += ppp_generic.o slhc.o +obj-$(CONFIG_PPP) += ppp_generic.o obj-$(CONFIG_PPP_ASYNC) += ppp_async.o obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o @@ -123,9 +120,7 @@ obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o obj-$(CONFIG_PPPOE) += pppox.o pppoe.o obj-$(CONFIG_SLIP) += slip.o -ifeq ($(CONFIG_SLIP_COMPRESSED),y) - obj-$(CONFIG_SLIP) += slhc.o -endif +obj-$(CONFIG_SLHC) += slhc.o obj-$(CONFIG_DUMMY) += dummy.o obj-$(CONFIG_IFB) += ifb.o diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index 1c01e9b3d07..c0f3574b470 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -725,7 +725,7 @@ static struct pci_driver acenic_pci_driver = { static int __init acenic_init(void) { - return pci_module_init(&acenic_pci_driver); + return pci_register_driver(&acenic_pci_driver); } static void __exit acenic_exit(void) diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index ed322a76980..2ef8e554263 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -2158,7 +2158,7 @@ static struct pci_driver amd8111e_driver = { static int __init amd8111e_init(void) { - return pci_module_init(&amd8111e_driver); + return pci_register_driver(&amd8111e_driver); } static void __exit amd8111e_cleanup(void) diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 979a33df0a8..fc256c197cd 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -177,7 +177,7 @@ static struct pci_driver com20020pci_driver = { static int __init com20020pci_init(void) { BUGLVL(D_NORMAL) printk(VERSION); - return pci_module_init(&com20020pci_driver); + return pci_register_driver(&com20020pci_driver); } static void __exit com20020pci_cleanup(void) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index bea0fc0ede2..17eb2912971 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2354,7 +2354,7 @@ static int __init b44_init(void) dma_desc_align_mask = ~(dma_desc_align_size - 1); dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); - return pci_module_init(&b44_driver); + return pci_register_driver(&b44_driver); } static void __exit b44_cleanup(void) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 652eb05a6c2..654b903985c 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -6016,7 +6016,7 @@ static struct pci_driver bnx2_pci_driver = { static int __init bnx2_init(void) { - return pci_module_init(&bnx2_pci_driver); + return pci_register_driver(&bnx2_pci_driver); } static void __exit bnx2_cleanup(void) diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index a31544ccb3c..26040abfef6 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -5245,7 +5245,7 @@ static int __init cas_init(void) else link_transition_timeout = 0; - return pci_module_init(&cas_driver); + return pci_register_driver(&cas_driver); } static void __exit cas_cleanup(void) diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c index e67872433e9..b6de184e469 100644 --- a/drivers/net/chelsio/cxgb2.c +++ b/drivers/net/chelsio/cxgb2.c @@ -1243,7 +1243,7 @@ static struct pci_driver driver = { static int __init t1_init_module(void) { - return pci_module_init(&driver); + return pci_register_driver(&driver); } static void __exit t1_cleanup_module(void) diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c index 91cc8cbdd44..7d06dedbfb2 100644 --- a/drivers/net/defxx.c +++ b/drivers/net/defxx.c @@ -3444,7 +3444,7 @@ static int __init dfx_init(void) { int rc_pci, rc_eisa; - rc_pci = pci_module_init(&dfx_driver); + rc_pci = pci_register_driver(&dfx_driver); if (rc_pci >= 0) dfx_have_pci = 1; rc_eisa = dfx_eisa_init(); diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 402961e68c8..a572c297056 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -1815,7 +1815,7 @@ static struct pci_driver rio_driver = { static int __init rio_init (void) { - return pci_module_init (&rio_driver); + return pci_register_driver(&rio_driver); } static void __exit diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 3d76fa144c4..a860ebbbf81 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -377,8 +377,8 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db) kfree(db->data_req); } - if (db->addr_res != NULL) { - release_resource(db->addr_res); + if (db->addr_req != NULL) { + release_resource(db->addr_req); kfree(db->addr_req); } } diff --git a/drivers/net/e100.c b/drivers/net/e100.c index ce850f1078b..47d970896a5 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -158,10 +158,10 @@ #define DRV_NAME "e100" -#define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.10-k2"DRV_EXT +#define DRV_EXT "-NAPI" +#define DRV_VERSION "3.5.16-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" -#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" +#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " #define E100_WATCHDOG_PERIOD (2 * HZ) @@ -1395,15 +1395,11 @@ static int e100_phy_init(struct nic *nic) } if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && - (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000))) { - /* enable/disable MDI/MDI-X auto-switching. - MDI/MDI-X auto-switching is disabled for 82551ER/QM chips */ - if((nic->mac == mac_82551_E) || (nic->mac == mac_82551_F) || - (nic->mac == mac_82551_10) || (nic->mii.force_media) || - !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled)) - mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 0); - else - mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, NCONFIG_AUTO_SWITCH); + (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && + !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { + /* enable/disable MDI/MDI-X auto-switching. */ + mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, + nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH); } return 0; @@ -1767,11 +1763,10 @@ static inline void e100_start_receiver(struct nic *nic, struct rx *rx) #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN) static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) { - if(!(rx->skb = dev_alloc_skb(RFD_BUF_LEN + NET_IP_ALIGN))) + if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN))) return -ENOMEM; /* Align, init, and map the RFD. */ - rx->skb->dev = nic->netdev; skb_reserve(rx->skb, NET_IP_ALIGN); memcpy(rx->skb->data, &nic->blank_rfd, sizeof(struct rfd)); rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data, @@ -2147,7 +2142,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) e100_start_receiver(nic, NULL); - if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) { + if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) { err = -ENOMEM; goto err_loopback_none; } @@ -2799,6 +2794,7 @@ static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel /* Detach; put netif into state similar to hotplug unplug. */ netif_poll_enable(netdev); netif_device_detach(netdev); + pci_disable_device(pdev); /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -2877,7 +2873,7 @@ static int __init e100_init_module(void) printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT); } - return pci_module_init(&e100_driver); + return pci_register_driver(&e100_driver); } static void __exit e100_cleanup_module(void) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index d304297c496..98afa9c2057 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -242,12 +242,10 @@ struct e1000_adapter { struct timer_list watchdog_timer; struct timer_list phy_info_timer; struct vlan_group *vlgrp; - uint16_t mng_vlan_id; + uint16_t mng_vlan_id; uint32_t bd_number; uint32_t rx_buffer_len; - uint32_t part_num; uint32_t wol; - uint32_t ksp3_port_a; uint32_t smartspeed; uint32_t en_mng_pt; uint16_t link_speed; @@ -342,7 +340,9 @@ struct e1000_adapter { boolean_t tso_force; #endif boolean_t smart_power_down; /* phy smart power down */ + boolean_t quad_port_a; unsigned long flags; + uint32_t eeprom_wol; }; enum e1000_state_t { diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 88a82ba88f5..3fccffdb27b 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -183,6 +183,9 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) return -EINVAL; } + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + if (ecmd->autoneg == AUTONEG_ENABLE) { hw->autoneg = 1; if (hw->media_type == e1000_media_type_fiber) @@ -199,16 +202,20 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ADVERTISED_TP; ecmd->advertising = hw->autoneg_advertised; } else - if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) + if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + clear_bit(__E1000_RESETTING, &adapter->flags); return -EINVAL; + } /* reset the link */ - if (netif_running(adapter->netdev)) - e1000_reinit_locked(adapter); - else + if (netif_running(adapter->netdev)) { + e1000_down(adapter); + e1000_up(adapter); + } else e1000_reset(adapter); + clear_bit(__E1000_RESETTING, &adapter->flags); return 0; } @@ -238,9 +245,13 @@ e1000_set_pauseparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int retval = 0; adapter->fc_autoneg = pause->autoneg; + while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) + msleep(1); + if (pause->rx_pause && pause->tx_pause) hw->fc = e1000_fc_full; else if (pause->rx_pause && !pause->tx_pause) @@ -253,15 +264,17 @@ e1000_set_pauseparam(struct net_device *netdev, hw->original_fc = hw->fc; if (adapter->fc_autoneg == AUTONEG_ENABLE) { - if (netif_running(adapter->netdev)) - e1000_reinit_locked(adapter); - else + if (netif_running(adapter->netdev)) { + e1000_down(adapter); + e1000_up(adapter); + } else e1000_reset(adapter); } else - return ((hw->media_type == e1000_media_type_fiber) ? - e1000_setup_link(hw) : e1000_force_mac_fc(hw)); + retval = ((hw->media_type == e1000_media_type_fiber) ? + e1000_setup_link(hw) : e1000_force_mac_fc(hw)); - return 0; + clear_bit(__E1000_RESETTING, &adapter->flags); + return retval; } static uint32_t @@ -415,12 +428,12 @@ e1000_get_regs(struct net_device *netdev, regs_buff[23] = regs_buff[18]; /* mdix mode */ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0); } else { - e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); regs_buff[13] = (uint32_t)phy_data; /* cable length */ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */ - e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); regs_buff[17] = (uint32_t)phy_data; /* extended 10bt distance */ regs_buff[18] = regs_buff[13]; /* cable polarity */ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */ @@ -696,7 +709,6 @@ e1000_set_ringparam(struct net_device *netdev, } clear_bit(__E1000_RESETTING, &adapter->flags); - return 0; err_setup_tx: e1000_free_all_rx_resources(adapter); @@ -881,16 +893,17 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; + /* NOTE: we don't test MSI interrupts here, yet */ /* Hook up test interrupt handler just for this test */ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, - netdev->name, netdev)) { - shared_int = FALSE; - } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, - netdev->name, netdev)){ + netdev->name, netdev)) + shared_int = FALSE; + else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, + netdev->name, netdev)) { *data = 1; return -1; } - DPRINTK(PROBE,INFO, "testing %s interrupt\n", + DPRINTK(HW, INFO, "testing %s interrupt\n", (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ @@ -1256,11 +1269,10 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140); /* autoneg off */ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140); - } else if (adapter->hw.phy_type == e1000_phy_gg82563) { + } else if (adapter->hw.phy_type == e1000_phy_gg82563) e1000_write_phy_reg(&adapter->hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); - } ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL); @@ -1288,9 +1300,9 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) } if (adapter->hw.media_type == e1000_media_type_copper && - adapter->hw.phy_type == e1000_phy_m88) { + adapter->hw.phy_type == e1000_phy_m88) ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ - } else { + else { /* Set the ILOS bit on the fiber Nic is half * duplex link is detected. */ stat_reg = E1000_READ_REG(&adapter->hw, STATUS); @@ -1426,11 +1438,10 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) case e1000_82546_rev_3: default: hw->autoneg = TRUE; - if (hw->phy_type == e1000_phy_gg82563) { + if (hw->phy_type == e1000_phy_gg82563) e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); - } e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; @@ -1590,6 +1601,8 @@ e1000_diag_test_count(struct net_device *netdev) return E1000_TEST_LEN; } +extern void e1000_power_up_phy(struct e1000_adapter *); + static void e1000_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, uint64_t *data) @@ -1606,6 +1619,8 @@ e1000_diag_test(struct net_device *netdev, uint8_t forced_speed_duplex = adapter->hw.forced_speed_duplex; uint8_t autoneg = adapter->hw.autoneg; + DPRINTK(HW, INFO, "offline testing starting\n"); + /* Link test performed before hardware reset so autoneg doesn't * interfere with test result */ if (e1000_link_test(adapter, &data[4])) @@ -1629,6 +1644,8 @@ e1000_diag_test(struct net_device *netdev, eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); + /* make sure the phy is powered up */ + e1000_power_up_phy(adapter); if (e1000_loopback_test(adapter, &data[3])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1642,6 +1659,7 @@ e1000_diag_test(struct net_device *netdev, if (if_running) dev_open(netdev); } else { + DPRINTK(HW, INFO, "online testing starting\n"); /* Online tests */ if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1657,14 +1675,12 @@ e1000_diag_test(struct net_device *netdev, msleep_interruptible(4 * 1000); } -static void -e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol) { - struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int retval = 1; /* fail by default */ - switch (adapter->hw.device_id) { - case E1000_DEV_ID_82542: + switch (hw->device_id) { case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: case E1000_DEV_ID_82544EI_FIBER: @@ -1672,52 +1688,87 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82545EM_FIBER: case E1000_DEV_ID_82545EM_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER: + case E1000_DEV_ID_82546GB_PCIE: + /* these don't support WoL at all */ wol->supported = 0; - wol->wolopts = 0; - return; - - case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - /* device id 10B5 port-A supports wol */ - if (!adapter->ksp3_port_a) { - wol->supported = 0; - return; - } - /* KSP3 does not suppport UCAST wake-ups for any interface */ - wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; - - if (adapter->wol & E1000_WUFC_EX) - DPRINTK(DRV, ERR, "Interface does not support " - "directed (unicast) frame wake-up packets\n"); - wol->wolopts = 0; - goto do_defaults; - + break; case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82571EB_FIBER: - /* Wake events only supported on port A for dual fiber */ + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82571EB_COPPER: + /* Wake events not supported on port B */ if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; - wol->wolopts = 0; - return; + break; } - /* Fall Through */ - + /* return success for non excluded adapter ports */ + retval = 0; + break; + case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* quad port adapters only support WoL on port A */ + if (!adapter->quad_port_a) { + wol->supported = 0; + break; + } + /* return success for non excluded adapter ports */ + retval = 0; + break; default: - wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; + /* dual port cards only support WoL on port A from now on + * unless it was enabled in the eeprom for port B + * so exclude FUNC_1 ports from having WoL enabled */ + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 && + !adapter->eeprom_wol) { + wol->supported = 0; + break; + } -do_defaults: - if (adapter->wol & E1000_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & E1000_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & E1000_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & E1000_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; + retval = 0; + } + + return retval; +} + +static void +e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + + /* this function will set ->supported = 0 and return 1 if wol is not + * supported by this hardware */ + if (e1000_wol_exclusion(adapter, wol)) return; + + /* apply any specific unsupported masks here */ + switch (adapter->hw.device_id) { + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* KSP3 does not suppport UCAST wake-ups */ + wol->supported &= ~WAKE_UCAST; + + if (adapter->wol & E1000_WUFC_EX) + DPRINTK(DRV, ERR, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + break; + default: + break; } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + + return; } static int @@ -1726,51 +1777,35 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - switch (adapter->hw.device_id) { - case E1000_DEV_ID_82542: - case E1000_DEV_ID_82543GC_FIBER: - case E1000_DEV_ID_82543GC_COPPER: - case E1000_DEV_ID_82544EI_FIBER: - case E1000_DEV_ID_82546EB_QUAD_COPPER: - case E1000_DEV_ID_82546GB_QUAD_COPPER: - case E1000_DEV_ID_82545EM_FIBER: - case E1000_DEV_ID_82545EM_COPPER: + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (e1000_wol_exclusion(adapter, wol)) return wol->wolopts ? -EOPNOTSUPP : 0; + switch (hw->device_id) { case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - /* device id 10B5 port-A supports wol */ - if (!adapter->ksp3_port_a) - return wol->wolopts ? -EOPNOTSUPP : 0; - if (wol->wolopts & WAKE_UCAST) { DPRINTK(DRV, ERR, "Interface does not support " "directed (unicast) frame wake-up packets\n"); return -EOPNOTSUPP; } - - case E1000_DEV_ID_82546EB_FIBER: - case E1000_DEV_ID_82546GB_FIBER: - case E1000_DEV_ID_82571EB_FIBER: - /* Wake events only supported on port A for dual fiber */ - if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) - return wol->wolopts ? -EOPNOTSUPP : 0; - /* Fall Through */ - + break; default: - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; + break; + } - adapter->wol = 0; + /* these settings will always override what we currently have */ + adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= E1000_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= E1000_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= E1000_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= E1000_WUFC_MAG; - } + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; return 0; } @@ -1895,8 +1930,8 @@ static struct ethtool_ops e1000_ethtool_ops = { .get_regs = e1000_get_regs, .get_wol = e1000_get_wol, .set_wol = e1000_set_wol, - .get_msglevel = e1000_get_msglevel, - .set_msglevel = e1000_set_msglevel, + .get_msglevel = e1000_get_msglevel, + .set_msglevel = e1000_set_msglevel, .nway_reset = e1000_nway_reset, .get_link = ethtool_op_get_link, .get_eeprom_len = e1000_get_eeprom_len, @@ -1904,17 +1939,17 @@ static struct ethtool_ops e1000_ethtool_ops = { .set_eeprom = e1000_set_eeprom, .get_ringparam = e1000_get_ringparam, .set_ringparam = e1000_set_ringparam, - .get_pauseparam = e1000_get_pauseparam, - .set_pauseparam = e1000_set_pauseparam, - .get_rx_csum = e1000_get_rx_csum, - .set_rx_csum = e1000_set_rx_csum, - .get_tx_csum = e1000_get_tx_csum, - .set_tx_csum = e1000_set_tx_csum, - .get_sg = ethtool_op_get_sg, - .set_sg = ethtool_op_set_sg, + .get_pauseparam = e1000_get_pauseparam, + .set_pauseparam = e1000_set_pauseparam, + .get_rx_csum = e1000_get_rx_csum, + .set_rx_csum = e1000_set_rx_csum, + .get_tx_csum = e1000_get_tx_csum, + .set_tx_csum = e1000_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, #ifdef NETIF_F_TSO - .get_tso = ethtool_op_get_tso, - .set_tso = e1000_set_tso, + .get_tso = ethtool_op_get_tso, + .set_tso = e1000_set_tso, #endif .self_test_count = e1000_diag_test_count, .self_test = e1000_diag_test, @@ -1922,7 +1957,7 @@ static struct ethtool_ops e1000_ethtool_ops = { .phys_id = e1000_phys_id, .get_stats_count = e1000_get_stats_count, .get_ethtool_stats = e1000_get_ethtool_stats, - .get_perm_addr = ethtool_op_get_perm_addr, + .get_perm_addr = ethtool_op_get_perm_addr, }; void e1000_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index b3b919116e0..a6f8f4fce70 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -31,6 +31,7 @@ * Shared functions for accessing and configuring the MAC */ + #include "e1000_hw.h" static int32_t e1000_set_phy_type(struct e1000_hw *hw); @@ -166,10 +167,10 @@ e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); - if(hw->mac_type == e1000_undefined) + if (hw->mac_type == e1000_undefined) return -E1000_ERR_PHY_TYPE; - switch(hw->phy_id) { + switch (hw->phy_id) { case M88E1000_E_PHY_ID: case M88E1000_I_PHY_ID: case M88E1011_I_PHY_ID: @@ -177,10 +178,10 @@ e1000_set_phy_type(struct e1000_hw *hw) hw->phy_type = e1000_phy_m88; break; case IGP01E1000_I_PHY_ID: - if(hw->mac_type == e1000_82541 || - hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82547_rev_2) { + if (hw->mac_type == e1000_82541 || + hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547 || + hw->mac_type == e1000_82547_rev_2) { hw->phy_type = e1000_phy_igp; break; } @@ -207,6 +208,7 @@ e1000_set_phy_type(struct e1000_hw *hw) return E1000_SUCCESS; } + /****************************************************************************** * IGP phy init script - initializes the GbE PHY * @@ -220,7 +222,7 @@ e1000_phy_init_script(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_init_script"); - if(hw->phy_init_script) { + if (hw->phy_init_script) { msec_delay(20); /* Save off the current value of register 0x2F5B to be restored at @@ -236,7 +238,7 @@ e1000_phy_init_script(struct e1000_hw *hw) msec_delay(5); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82541: case e1000_82547: e1000_write_phy_reg(hw, 0x1F95, 0x0001); @@ -273,22 +275,22 @@ e1000_phy_init_script(struct e1000_hw *hw) /* Now enable the transmitter */ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - if(hw->mac_type == e1000_82547) { + if (hw->mac_type == e1000_82547) { uint16_t fused, fine, coarse; /* Move to analog registers page */ e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused); - if(!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { + if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) { e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused); fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK; coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK; - if(coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) { + if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) { coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10; fine -= IGP01E1000_ANALOG_FUSE_FINE_1; - } else if(coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH) + } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH) fine -= IGP01E1000_ANALOG_FUSE_FINE_10; fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) | @@ -387,6 +389,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82571EB_COPPER: case E1000_DEV_ID_82571EB_FIBER: case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82571EB_QUAD_COPPER: hw->mac_type = e1000_82571; break; case E1000_DEV_ID_82572EI_COPPER: @@ -418,7 +421,7 @@ e1000_set_mac_type(struct e1000_hw *hw) return -E1000_ERR_MAC_TYPE; } - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_ich8lan: hw->swfwhw_semaphore_present = TRUE; hw->asf_firmware_present = TRUE; @@ -456,7 +459,7 @@ e1000_set_media_type(struct e1000_hw *hw) DEBUGFUNC("e1000_set_media_type"); - if(hw->mac_type != e1000_82543) { + if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ hw->tbi_compatibility_en = FALSE; } @@ -516,16 +519,16 @@ e1000_reset_hw(struct e1000_hw *hw) DEBUGFUNC("e1000_reset_hw"); /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ - if(hw->mac_type == e1000_82542_rev2_0) { + if (hw->mac_type == e1000_82542_rev2_0) { DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); e1000_pci_clear_mwi(hw); } - if(hw->bus_type == e1000_bus_type_pci_express) { + if (hw->bus_type == e1000_bus_type_pci_express) { /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ - if(e1000_disable_pciex_master(hw) != E1000_SUCCESS) { + if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) { DEBUGOUT("PCI-E Master disable polling has failed.\n"); } } @@ -553,14 +556,14 @@ e1000_reset_hw(struct e1000_hw *hw) ctrl = E1000_READ_REG(hw, CTRL); /* Must reset the PHY before resetting the MAC */ - if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); msec_delay(5); } /* Must acquire the MDIO ownership before MAC reset. * Ownership defaults to firmware after a reset. */ - if(hw->mac_type == e1000_82573) { + if (hw->mac_type == e1000_82573) { timeout = 10; extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); @@ -570,14 +573,14 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); - if(extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) + if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) break; else extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; msec_delay(2); timeout--; - } while(timeout); + } while (timeout); } /* Workaround for ICH8 bit corruption issue in FIFO memory */ @@ -595,7 +598,7 @@ e1000_reset_hw(struct e1000_hw *hw) */ DEBUGOUT("Issuing a global reset to MAC\n"); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82544: case e1000_82540: case e1000_82545: @@ -634,7 +637,7 @@ e1000_reset_hw(struct e1000_hw *hw) * device. Later controllers reload the EEPROM automatically, so just wait * for reload to complete. */ - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: case e1000_82543: @@ -669,7 +672,7 @@ e1000_reset_hw(struct e1000_hw *hw) case e1000_ich8lan: case e1000_80003es2lan: ret_val = e1000_get_auto_rd_done(hw); - if(ret_val) + if (ret_val) /* We don't want to continue accessing MAC registers. */ return ret_val; break; @@ -680,13 +683,13 @@ e1000_reset_hw(struct e1000_hw *hw) } /* Disable HW ARPs on ASF enabled adapters */ - if(hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { + if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { manc = E1000_READ_REG(hw, MANC); manc &= ~(E1000_MANC_ARP_EN); E1000_WRITE_REG(hw, MANC, manc); } - if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { e1000_phy_init_script(hw); /* Configure activity LED after PHY reset */ @@ -704,8 +707,8 @@ e1000_reset_hw(struct e1000_hw *hw) icr = E1000_READ_REG(hw, ICR); /* If MWI was previously enabled, reenable it. */ - if(hw->mac_type == e1000_82542_rev2_0) { - if(hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE) + if (hw->mac_type == e1000_82542_rev2_0) { + if (hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE) e1000_pci_set_mwi(hw); } @@ -745,9 +748,20 @@ e1000_init_hw(struct e1000_hw *hw) DEBUGFUNC("e1000_init_hw"); + /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */ + if (hw->mac_type == e1000_ich8lan) { + reg_data = E1000_READ_REG(hw, TARC0); + reg_data |= 0x30000000; + E1000_WRITE_REG(hw, TARC0, reg_data); + + reg_data = E1000_READ_REG(hw, STATUS); + reg_data &= ~0x80000000; + E1000_WRITE_REG(hw, STATUS, reg_data); + } + /* Initialize Identification LED */ ret_val = e1000_id_led_init(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Initializing Identification LED\n"); return ret_val; } @@ -765,7 +779,7 @@ e1000_init_hw(struct e1000_hw *hw) } /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ - if(hw->mac_type == e1000_82542_rev2_0) { + if (hw->mac_type == e1000_82542_rev2_0) { DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); e1000_pci_clear_mwi(hw); E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST); @@ -779,11 +793,11 @@ e1000_init_hw(struct e1000_hw *hw) e1000_init_rx_addrs(hw); /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ - if(hw->mac_type == e1000_82542_rev2_0) { + if (hw->mac_type == e1000_82542_rev2_0) { E1000_WRITE_REG(hw, RCTL, 0); E1000_WRITE_FLUSH(hw); msec_delay(1); - if(hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE) + if (hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE) e1000_pci_set_mwi(hw); } @@ -792,7 +806,7 @@ e1000_init_hw(struct e1000_hw *hw) mta_size = E1000_MC_TBL_SIZE; if (hw->mac_type == e1000_ich8lan) mta_size = E1000_MC_TBL_SIZE_ICH8LAN; - for(i = 0; i < mta_size; i++) { + for (i = 0; i < mta_size; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* use write flush to prevent Memory Write Block (MWB) from * occuring when accessing our register space */ @@ -804,18 +818,18 @@ e1000_init_hw(struct e1000_hw *hw) * gives equal priority to transmits and receives. Valid only on * 82542 and 82543 silicon. */ - if(hw->dma_fairness && hw->mac_type <= e1000_82543) { + if (hw->dma_fairness && hw->mac_type <= e1000_82543) { ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR); } - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82545_rev_3: case e1000_82546_rev_3: break; default: /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */ - if(hw->bus_type == e1000_bus_type_pcix) { + if (hw->bus_type == e1000_bus_type_pcix) { e1000_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd_word); e1000_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI, &pcix_stat_hi_word); @@ -823,9 +837,9 @@ e1000_init_hw(struct e1000_hw *hw) PCIX_COMMAND_MMRBC_SHIFT; stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >> PCIX_STATUS_HI_MMRBC_SHIFT; - if(stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K) + if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K) stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K; - if(cmd_mmrbc > stat_mmrbc) { + if (cmd_mmrbc > stat_mmrbc) { pcix_cmd_word &= ~PCIX_COMMAND_MMRBC_MASK; pcix_cmd_word |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT; e1000_write_pci_cfg(hw, PCIX_COMMAND_REGISTER, @@ -843,7 +857,7 @@ e1000_init_hw(struct e1000_hw *hw) ret_val = e1000_setup_link(hw); /* Set the transmit descriptor write-back policy */ - if(hw->mac_type > e1000_82544) { + if (hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; switch (hw->mac_type) { @@ -894,14 +908,13 @@ e1000_init_hw(struct e1000_hw *hw) case e1000_ich8lan: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - if(hw->mac_type >= e1000_82571) + if (hw->mac_type >= e1000_82571) ctrl |= E1000_TXDCTL_COUNT_DESC; E1000_WRITE_REG(hw, TXDCTL1, ctrl); break; } - if (hw->mac_type == e1000_82573) { uint32_t gcr = E1000_READ_REG(hw, GCR); gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; @@ -945,10 +958,10 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw) DEBUGFUNC("e1000_adjust_serdes_amplitude"); - if(hw->media_type != e1000_media_type_internal_serdes) + if (hw->media_type != e1000_media_type_internal_serdes) return E1000_SUCCESS; - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82545_rev_3: case e1000_82546_rev_3: break; @@ -961,11 +974,11 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw) return ret_val; } - if(eeprom_data != EEPROM_RESERVED_WORD) { + if (eeprom_data != EEPROM_RESERVED_WORD) { /* Adjust SERDES output amplitude only. */ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data); - if(ret_val) + if (ret_val) return ret_val; } @@ -1033,10 +1046,10 @@ e1000_setup_link(struct e1000_hw *hw) * in case we get disconnected and then reconnected into a different * hub or switch with different Flow Control capabilities. */ - if(hw->mac_type == e1000_82542_rev2_0) + if (hw->mac_type == e1000_82542_rev2_0) hw->fc &= (~e1000_fc_tx_pause); - if((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) + if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) hw->fc &= (~e1000_fc_rx_pause); hw->original_fc = hw->fc; @@ -1051,12 +1064,12 @@ e1000_setup_link(struct e1000_hw *hw) * or e1000_phy_setup() is called. */ if (hw->mac_type == e1000_82543) { - ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, - 1, &eeprom_data); - if (ret_val) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << SWDPIO__EXT_SHIFT); E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); @@ -1089,14 +1102,14 @@ e1000_setup_link(struct e1000_hw *hw) * ability to transmit pause frames in not enabled, then these * registers will be set to 0. */ - if(!(hw->fc & e1000_fc_tx_pause)) { + if (!(hw->fc & e1000_fc_tx_pause)) { E1000_WRITE_REG(hw, FCRTL, 0); E1000_WRITE_REG(hw, FCRTH, 0); } else { /* We need to set up the Receive Threshold high and low water marks * as well as (optionally) enabling the transmission of XON frames. */ - if(hw->fc_send_xon) { + if (hw->fc_send_xon) { E1000_WRITE_REG(hw, FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water); } else { @@ -1143,11 +1156,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * the EEPROM. */ ctrl = E1000_READ_REG(hw, CTRL); - if(hw->media_type == e1000_media_type_fiber) + if (hw->media_type == e1000_media_type_fiber) signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; ret_val = e1000_adjust_serdes_amplitude(hw); - if(ret_val) + if (ret_val) return ret_val; /* Take the link out of reset */ @@ -1155,7 +1168,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) /* Adjust VCO speed to improve BER performance */ ret_val = e1000_set_vco_speed(hw); - if(ret_val) + if (ret_val) return ret_val; e1000_config_collision_dist(hw); @@ -1226,15 +1239,15 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * less than 500 milliseconds even if the other end is doing it in SW). * For internal serdes, we just assume a signal is present, then poll. */ - if(hw->media_type == e1000_media_type_internal_serdes || + if (hw->media_type == e1000_media_type_internal_serdes || (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) { DEBUGOUT("Looking for Link\n"); - for(i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { + for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { msec_delay(10); status = E1000_READ_REG(hw, STATUS); - if(status & E1000_STATUS_LU) break; + if (status & E1000_STATUS_LU) break; } - if(i == (LINK_UP_TIMEOUT / 10)) { + if (i == (LINK_UP_TIMEOUT / 10)) { DEBUGOUT("Never got a valid link from auto-neg!!!\n"); hw->autoneg_failed = 1; /* AutoNeg failed to achieve a link, so we'll call @@ -1243,7 +1256,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * non-autonegotiating link partners. */ ret_val = e1000_check_for_link(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error while checking for link\n"); return ret_val; } @@ -1277,7 +1290,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) * the PHY speed and duplex configuration is. In addition, we need to * perform a hardware reset on the PHY to take it out of reset. */ - if(hw->mac_type > e1000_82543) { + if (hw->mac_type > e1000_82543) { ctrl |= E1000_CTRL_SLU; ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); E1000_WRITE_REG(hw, CTRL, ctrl); @@ -1285,13 +1298,13 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); E1000_WRITE_REG(hw, CTRL, ctrl); ret_val = e1000_phy_hw_reset(hw); - if(ret_val) + if (ret_val) return ret_val; } /* Make sure we have a valid PHY */ ret_val = e1000_detect_gig_phy(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error, did not detect valid phy.\n"); return ret_val; } @@ -1299,19 +1312,19 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) /* Set PHY to class A mode (if necessary) */ ret_val = e1000_set_phy_mode(hw); - if(ret_val) + if (ret_val) return ret_val; - if((hw->mac_type == e1000_82545_rev_3) || + if ((hw->mac_type == e1000_82545_rev_3) || (hw->mac_type == e1000_82546_rev_3)) { ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); phy_data |= 0x00000008; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); } - if(hw->mac_type <= e1000_82543 || - hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || - hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) + if (hw->mac_type <= e1000_82543 || + hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || + hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) hw->phy_reset_disable = FALSE; return E1000_SUCCESS; @@ -1341,7 +1354,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) return ret_val; } - /* Wait 10ms for MAC to configure PHY from eeprom settings */ + /* Wait 15ms for MAC to configure PHY from eeprom settings */ msec_delay(15); if (hw->mac_type != e1000_ich8lan) { /* Configure activity LED after PHY reset */ @@ -1351,11 +1364,14 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) E1000_WRITE_REG(hw, LEDCTL, led_ctrl); } - /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); - if (ret_val) { - DEBUGOUT("Error Disabling LPLU D3\n"); - return ret_val; + /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ + if (hw->phy_type == e1000_phy_igp) { + /* disable lplu d3 during driver init */ + ret_val = e1000_set_d3_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } } /* disable lplu d0 during driver init */ @@ -1393,45 +1409,45 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) } } ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; /* set auto-master slave resolution settings */ - if(hw->autoneg) { + if (hw->autoneg) { e1000_ms_type phy_ms_setting = hw->master_slave; - if(hw->ffe_config_state == e1000_ffe_config_active) + if (hw->ffe_config_state == e1000_ffe_config_active) hw->ffe_config_state = e1000_ffe_config_enabled; - if(hw->dsp_config_state == e1000_dsp_config_activated) + if (hw->dsp_config_state == e1000_dsp_config_activated) hw->dsp_config_state = e1000_dsp_config_enabled; /* when autonegotiation advertisment is only 1000Mbps then we * should disable SmartSpeed and enable Auto MasterSlave * resolution as hardware default. */ - if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { + if (hw->autoneg_advertised == ADVERTISE_1000_FULL) { /* Disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if(ret_val) + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if(ret_val) + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if (ret_val) return ret_val; /* Set auto Master/Slave resolution process */ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~CR_1000T_MS_ENABLE; ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; } ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; /* load defaults for future use */ @@ -1455,7 +1471,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) break; } ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; } @@ -1476,12 +1492,12 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_ggp_setup"); - if(!hw->phy_reset_disable) { + if (!hw->phy_reset_disable) { /* Enable CRS on TX for half-duplex operation. */ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; @@ -1490,7 +1506,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; /* Options: @@ -1501,7 +1517,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) */ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK; @@ -1526,11 +1542,11 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * 1 - Enabled */ phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE; - if(hw->disable_polarity_correction == 1) + if (hw->disable_polarity_correction == 1) phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE; ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; /* SW Reset the PHY so all changes take effect */ @@ -1586,9 +1602,9 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) return ret_val; phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; - ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, phy_data); + if (ret_val) return ret_val; } @@ -1623,12 +1639,12 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_mgp_setup"); - if(hw->phy_reset_disable) + if (hw->phy_reset_disable) return E1000_SUCCESS; /* Enable CRS on TX. This must be set for half-duplex operation. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; @@ -1665,7 +1681,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) * 1 - Enabled */ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if(hw->disable_polarity_correction == 1) + if (hw->disable_polarity_correction == 1) phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); if (ret_val) @@ -1705,7 +1721,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) /* SW Reset the PHY so all changes take effect */ ret_val = e1000_phy_reset(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Resetting the PHY\n"); return ret_val; } @@ -1735,7 +1751,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) /* If autoneg_advertised is zero, we assume it was not defaulted * by the calling code so we set to advertise full capability. */ - if(hw->autoneg_advertised == 0) + if (hw->autoneg_advertised == 0) hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; /* IFE phy only supports 10/100 */ @@ -1744,7 +1760,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Setting up Auto-Negotiation\n"); return ret_val; } @@ -1754,20 +1770,20 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) * the Auto Neg Restart bit in the PHY control register. */ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; /* Does the user want to wait for Auto-Neg to complete here, or * check at a later time (for example, callback routine). */ - if(hw->wait_autoneg_complete) { + if (hw->wait_autoneg_complete) { ret_val = e1000_wait_autoneg(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error while waiting for autoneg to complete\n"); return ret_val; } @@ -1778,7 +1794,6 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) return E1000_SUCCESS; } - /****************************************************************************** * Config the MAC and the PHY after link is up. * 1) Set up the MAC to the current PHY speed/duplex @@ -1797,25 +1812,25 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) int32_t ret_val; DEBUGFUNC("e1000_copper_link_postconfig"); - if(hw->mac_type >= e1000_82544) { + if (hw->mac_type >= e1000_82544) { e1000_config_collision_dist(hw); } else { ret_val = e1000_config_mac_to_phy(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error configuring MAC to PHY settings\n"); return ret_val; } } ret_val = e1000_config_fc_after_link_up(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Configuring Flow Control\n"); return ret_val; } /* Config DSP to improve Giga link quality */ - if(hw->phy_type == e1000_phy_igp) { + if (hw->phy_type == e1000_phy_igp) { ret_val = e1000_config_dsp_after_link_change(hw, TRUE); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Configuring DSP after link up\n"); return ret_val; } @@ -1861,7 +1876,7 @@ e1000_setup_copper_link(struct e1000_hw *hw) /* Check if it is a valid PHY and set PHY mode if necessary. */ ret_val = e1000_copper_link_preconfig(hw); - if(ret_val) + if (ret_val) return ret_val; switch (hw->mac_type) { @@ -1882,30 +1897,30 @@ e1000_setup_copper_link(struct e1000_hw *hw) hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_copper_link_igp_setup(hw); - if(ret_val) + if (ret_val) return ret_val; } else if (hw->phy_type == e1000_phy_m88) { ret_val = e1000_copper_link_mgp_setup(hw); - if(ret_val) + if (ret_val) return ret_val; } else if (hw->phy_type == e1000_phy_gg82563) { ret_val = e1000_copper_link_ggp_setup(hw); - if(ret_val) + if (ret_val) return ret_val; } - if(hw->autoneg) { + if (hw->autoneg) { /* Setup autoneg and flow control advertisement * and perform autonegotiation */ ret_val = e1000_copper_link_autoneg(hw); - if(ret_val) + if (ret_val) return ret_val; } else { /* PHY will be set to 10H, 10F, 100H,or 100F * depending on value from forced_speed_duplex. */ DEBUGOUT("Forcing speed and duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Forcing Speed and Duplex\n"); return ret_val; } @@ -1914,18 +1929,18 @@ e1000_setup_copper_link(struct e1000_hw *hw) /* Check link status. Wait up to 100 microseconds for link to become * valid. */ - for(i = 0; i < 10; i++) { + for (i = 0; i < 10; i++) { ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if(phy_data & MII_SR_LINK_STATUS) { + if (phy_data & MII_SR_LINK_STATUS) { /* Config the MAC and PHY after link is up */ ret_val = e1000_copper_link_postconfig(hw); - if(ret_val) + if (ret_val) return ret_val; DEBUGOUT("Valid link established!!!\n"); @@ -2027,7 +2042,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Read the MII Auto-Neg Advertisement Register (Address 4). */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); - if(ret_val) + if (ret_val) return ret_val; if (hw->phy_type != e1000_phy_ife) { @@ -2055,36 +2070,36 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ - if(hw->autoneg_advertised & ADVERTISE_10_HALF) { + if (hw->autoneg_advertised & ADVERTISE_10_HALF) { DEBUGOUT("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ - if(hw->autoneg_advertised & ADVERTISE_10_FULL) { + if (hw->autoneg_advertised & ADVERTISE_10_FULL) { DEBUGOUT("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ - if(hw->autoneg_advertised & ADVERTISE_100_HALF) { + if (hw->autoneg_advertised & ADVERTISE_100_HALF) { DEBUGOUT("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ - if(hw->autoneg_advertised & ADVERTISE_100_FULL) { + if (hw->autoneg_advertised & ADVERTISE_100_FULL) { DEBUGOUT("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ - if(hw->autoneg_advertised & ADVERTISE_1000_HALF) { + if (hw->autoneg_advertised & ADVERTISE_1000_HALF) { DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n"); } /* Do we want to advertise 1000 Mb Full Duplex? */ - if(hw->autoneg_advertised & ADVERTISE_1000_FULL) { + if (hw->autoneg_advertised & ADVERTISE_1000_FULL) { DEBUGOUT("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; if (hw->phy_type == e1000_phy_ife) { @@ -2146,7 +2161,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) } ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); - if(ret_val) + if (ret_val) return ret_val; DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); @@ -2194,7 +2209,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Read the MII Control Register. */ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg); - if(ret_val) + if (ret_val) return ret_val; /* We need to disable autoneg in order to force link and duplex. */ @@ -2202,8 +2217,8 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN; /* Are we forcing Full or Half Duplex? */ - if(hw->forced_speed_duplex == e1000_100_full || - hw->forced_speed_duplex == e1000_10_full) { + if (hw->forced_speed_duplex == e1000_100_full || + hw->forced_speed_duplex == e1000_10_full) { /* We want to force full duplex so we SET the full duplex bits in the * Device and MII Control Registers. */ @@ -2220,7 +2235,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) } /* Are we forcing 100Mbps??? */ - if(hw->forced_speed_duplex == e1000_100_full || + if (hw->forced_speed_duplex == e1000_100_full || hw->forced_speed_duplex == e1000_100_half) { /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */ ctrl |= E1000_CTRL_SPD_100; @@ -2243,7 +2258,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) if ((hw->phy_type == e1000_phy_m88) || (hw->phy_type == e1000_phy_gg82563)) { ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI @@ -2251,7 +2266,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) */ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data); @@ -2275,20 +2290,20 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) * forced whenever speed or duplex are forced. */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; } /* Write back the modified PHY MII control register. */ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg); - if(ret_val) + if (ret_val) return ret_val; udelay(1); @@ -2300,50 +2315,50 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) * only if the user has set wait_autoneg_complete to 1, which is * the default. */ - if(hw->wait_autoneg_complete) { + if (hw->wait_autoneg_complete) { /* We will wait for autoneg to complete. */ DEBUGOUT("Waiting for forced speed/duplex link.\n"); mii_status_reg = 0; /* We will wait for autoneg to complete or 4.5 seconds to expire. */ - for(i = PHY_FORCE_TIME; i > 0; i--) { + for (i = PHY_FORCE_TIME; i > 0; i--) { /* Read the MII Status Register and wait for Auto-Neg Complete bit * to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; - if(mii_status_reg & MII_SR_LINK_STATUS) break; + if (mii_status_reg & MII_SR_LINK_STATUS) break; msec_delay(100); } - if((i == 0) && + if ((i == 0) && ((hw->phy_type == e1000_phy_m88) || (hw->phy_type == e1000_phy_gg82563))) { /* We didn't get link. Reset the DSP and wait again for link. */ ret_val = e1000_phy_reset_dsp(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error Resetting PHY DSP\n"); return ret_val; } } /* This loop will early-out if the link condition has been met. */ - for(i = PHY_FORCE_TIME; i > 0; i--) { - if(mii_status_reg & MII_SR_LINK_STATUS) break; + for (i = PHY_FORCE_TIME; i > 0; i--) { + if (mii_status_reg & MII_SR_LINK_STATUS) break; msec_delay(100); /* Read the MII Status Register and wait for Auto-Neg Complete bit * to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; } } @@ -2354,32 +2369,31 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) * defaults back to a 2.5MHz clock when the PHY is reset. */ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= M88E1000_EPSCR_TX_CLK_25; ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; /* In addition, because of the s/w reset above, we need to enable CRS on * TX. This must be set for both full and half duplex operation. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; - if((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && - (!hw->autoneg) && - (hw->forced_speed_duplex == e1000_10_full || - hw->forced_speed_duplex == e1000_10_half)) { + if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && + (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full || + hw->forced_speed_duplex == e1000_10_half)) { ret_val = e1000_polarity_reversal_workaround(hw); - if(ret_val) + if (ret_val) return ret_val; } } else if (hw->phy_type == e1000_phy_gg82563) { @@ -2470,10 +2484,10 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) * registers depending on negotiated values. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if(phy_data & M88E1000_PSSR_DPLX) + if (phy_data & M88E1000_PSSR_DPLX) ctrl |= E1000_CTRL_FD; else ctrl &= ~E1000_CTRL_FD; @@ -2483,9 +2497,9 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) /* Set up speed in the Device Control register depending on * negotiated values. */ - if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) + else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) ctrl |= E1000_CTRL_SPD_100; /* Write the configured values back to the Device Control Reg. */ @@ -2553,7 +2567,7 @@ e1000_force_mac_fc(struct e1000_hw *hw) } /* Disable TX Flow Control for 82542 (rev 2.0) */ - if(hw->mac_type == e1000_82542_rev2_0) + if (hw->mac_type == e1000_82542_rev2_0) ctrl &= (~E1000_CTRL_TFCE); E1000_WRITE_REG(hw, CTRL, ctrl); @@ -2587,11 +2601,12 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. */ - if(((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) || - ((hw->media_type == e1000_media_type_internal_serdes) && (hw->autoneg_failed)) || - ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) { + if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) || + ((hw->media_type == e1000_media_type_internal_serdes) && + (hw->autoneg_failed)) || + ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) { ret_val = e1000_force_mac_fc(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error forcing flow control settings\n"); return ret_val; } @@ -2602,19 +2617,19 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * has completed, and if so, how the PHY and link partner has * flow control configured. */ - if((hw->media_type == e1000_media_type_copper) && hw->autoneg) { + if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) { /* Read the MII Status Register and check to see if AutoNeg * has completed. We read this twice because this reg has * some "sticky" (latched) bits. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; - if(mii_status_reg & MII_SR_AUTONEG_COMPLETE) { + if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) { /* The AutoNeg process has completed, so we now need to * read both the Auto Negotiation Advertisement Register * (Address 4) and the Auto_Negotiation Base Page Ability @@ -2623,11 +2638,11 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); - if(ret_val) + if (ret_val) return ret_val; /* Two bits in the Auto Negotiation Advertisement Register @@ -2664,15 +2679,15 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * 1 | DC | 1 | DC | e1000_fc_full * */ - if((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { /* Now we need to check if the user selected RX ONLY * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise RX * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if(hw->original_fc == e1000_fc_full) { + if (hw->original_fc == e1000_fc_full) { hw->fc = e1000_fc_full; DEBUGOUT("Flow Control = FULL.\n"); } else { @@ -2688,10 +2703,10 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * 0 | 1 | 1 | 1 | e1000_fc_tx_pause * */ - else if(!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc = e1000_fc_tx_pause; DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); } @@ -2703,10 +2718,10 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * 1 | 1 | 0 | 1 | e1000_fc_rx_pause * */ - else if((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc = e1000_fc_rx_pause; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } @@ -2730,9 +2745,9 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if((hw->original_fc == e1000_fc_none || - hw->original_fc == e1000_fc_tx_pause) || - hw->fc_strict_ieee) { + else if ((hw->original_fc == e1000_fc_none || + hw->original_fc == e1000_fc_tx_pause) || + hw->fc_strict_ieee) { hw->fc = e1000_fc_none; DEBUGOUT("Flow Control = NONE.\n"); } else { @@ -2745,19 +2760,19 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * enabled per IEEE 802.3 spec. */ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error getting link speed and duplex\n"); return ret_val; } - if(duplex == HALF_DUPLEX) + if (duplex == HALF_DUPLEX) hw->fc = e1000_fc_none; /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. */ ret_val = e1000_force_mac_fc(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error forcing flow control settings\n"); return ret_val; } @@ -2796,13 +2811,13 @@ e1000_check_for_link(struct e1000_hw *hw) * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. */ - if((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) { + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) { rxcw = E1000_READ_REG(hw, RXCW); - if(hw->media_type == e1000_media_type_fiber) { + if (hw->media_type == e1000_media_type_fiber) { signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; - if(status & E1000_STATUS_LU) + if (status & E1000_STATUS_LU) hw->get_link_status = FALSE; } } @@ -2813,20 +2828,20 @@ e1000_check_for_link(struct e1000_hw *hw) * receive a Link Status Change interrupt or we have Rx Sequence * Errors. */ - if((hw->media_type == e1000_media_type_copper) && hw->get_link_status) { + if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) { /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex * of the PHY. * Read the register twice since the link bit is sticky. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if(phy_data & MII_SR_LINK_STATUS) { + if (phy_data & MII_SR_LINK_STATUS) { hw->get_link_status = FALSE; /* Check if there was DownShift, must be checked immediately after * link-up */ @@ -2840,10 +2855,10 @@ e1000_check_for_link(struct e1000_hw *hw) * happen due to the execution of this workaround. */ - if((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && - (!hw->autoneg) && - (hw->forced_speed_duplex == e1000_10_full || - hw->forced_speed_duplex == e1000_10_half)) { + if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) && + (!hw->autoneg) && + (hw->forced_speed_duplex == e1000_10_full || + hw->forced_speed_duplex == e1000_10_half)) { E1000_WRITE_REG(hw, IMC, 0xffffffff); ret_val = e1000_polarity_reversal_workaround(hw); icr = E1000_READ_REG(hw, ICR); @@ -2860,7 +2875,7 @@ e1000_check_for_link(struct e1000_hw *hw) /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. */ - if(!hw->autoneg) return -E1000_ERR_CONFIG; + if (!hw->autoneg) return -E1000_ERR_CONFIG; /* optimize the dsp settings for the igp phy */ e1000_config_dsp_after_link_change(hw, TRUE); @@ -2873,11 +2888,11 @@ e1000_check_for_link(struct e1000_hw *hw) * speed/duplex on the MAC to the current PHY speed/duplex * settings. */ - if(hw->mac_type >= e1000_82544) + if (hw->mac_type >= e1000_82544) e1000_config_collision_dist(hw); else { ret_val = e1000_config_mac_to_phy(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error configuring MAC to PHY settings\n"); return ret_val; } @@ -2888,7 +2903,7 @@ e1000_check_for_link(struct e1000_hw *hw) * have had to re-autoneg with a different link partner. */ ret_val = e1000_config_fc_after_link_up(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error configuring flow control\n"); return ret_val; } @@ -2900,7 +2915,7 @@ e1000_check_for_link(struct e1000_hw *hw) * at gigabit speed, then TBI compatibility is not needed. If we are * at gigabit speed, we turn on TBI compatibility. */ - if(hw->tbi_compatibility_en) { + if (hw->tbi_compatibility_en) { uint16_t speed, duplex; ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); if (ret_val) { @@ -2911,7 +2926,7 @@ e1000_check_for_link(struct e1000_hw *hw) /* If link speed is not set to gigabit speed, we do not need * to enable TBI compatibility. */ - if(hw->tbi_compatibility_on) { + if (hw->tbi_compatibility_on) { /* If we previously were in the mode, turn it off. */ rctl = E1000_READ_REG(hw, RCTL); rctl &= ~E1000_RCTL_SBP; @@ -2924,7 +2939,7 @@ e1000_check_for_link(struct e1000_hw *hw) * packets. Some frames have an additional byte on the end and * will look like CRC errors to to the hardware. */ - if(!hw->tbi_compatibility_on) { + if (!hw->tbi_compatibility_on) { hw->tbi_compatibility_on = TRUE; rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_SBP; @@ -2940,12 +2955,12 @@ e1000_check_for_link(struct e1000_hw *hw) * auto-negotiation time to complete, in case the cable was just plugged * in. The autoneg_failed flag does this. */ - else if((((hw->media_type == e1000_media_type_fiber) && + else if ((((hw->media_type == e1000_media_type_fiber) && ((ctrl & E1000_CTRL_SWDPIN1) == signal)) || - (hw->media_type == e1000_media_type_internal_serdes)) && - (!(status & E1000_STATUS_LU)) && - (!(rxcw & E1000_RXCW_C))) { - if(hw->autoneg_failed == 0) { + (hw->media_type == e1000_media_type_internal_serdes)) && + (!(status & E1000_STATUS_LU)) && + (!(rxcw & E1000_RXCW_C))) { + if (hw->autoneg_failed == 0) { hw->autoneg_failed = 1; return 0; } @@ -2961,7 +2976,7 @@ e1000_check_for_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000_config_fc_after_link_up(hw); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error configuring flow control\n"); return ret_val; } @@ -2971,9 +2986,9 @@ e1000_check_for_link(struct e1000_hw *hw) * Device Control register in an attempt to auto-negotiate with our link * partner. */ - else if(((hw->media_type == e1000_media_type_fiber) || - (hw->media_type == e1000_media_type_internal_serdes)) && - (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + else if (((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) && + (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); E1000_WRITE_REG(hw, TXCW, hw->txcw); E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -2983,12 +2998,12 @@ e1000_check_for_link(struct e1000_hw *hw) /* If we force link for non-auto-negotiation switch, check link status * based on MAC synchronization for internal serdes media type. */ - else if((hw->media_type == e1000_media_type_internal_serdes) && - !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { + else if ((hw->media_type == e1000_media_type_internal_serdes) && + !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { /* SYNCH bit and IV bit are sticky. */ udelay(10); - if(E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) { - if(!(rxcw & E1000_RXCW_IV)) { + if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) { + if (!(rxcw & E1000_RXCW_IV)) { hw->serdes_link_down = FALSE; DEBUGOUT("SERDES: Link is up.\n"); } @@ -2997,8 +3012,8 @@ e1000_check_for_link(struct e1000_hw *hw) DEBUGOUT("SERDES: Link is down.\n"); } } - if((hw->media_type == e1000_media_type_internal_serdes) && - (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { + if ((hw->media_type == e1000_media_type_internal_serdes) && + (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { hw->serdes_link_down = !(E1000_STATUS_LU & E1000_READ_REG(hw, STATUS)); } return E1000_SUCCESS; @@ -3022,12 +3037,12 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, DEBUGFUNC("e1000_get_speed_and_duplex"); - if(hw->mac_type >= e1000_82543) { + if (hw->mac_type >= e1000_82543) { status = E1000_READ_REG(hw, STATUS); - if(status & E1000_STATUS_SPEED_1000) { + if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; DEBUGOUT("1000 Mbs, "); - } else if(status & E1000_STATUS_SPEED_100) { + } else if (status & E1000_STATUS_SPEED_100) { *speed = SPEED_100; DEBUGOUT("100 Mbs, "); } else { @@ -3035,7 +3050,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, DEBUGOUT("10 Mbs, "); } - if(status & E1000_STATUS_FD) { + if (status & E1000_STATUS_FD) { *duplex = FULL_DUPLEX; DEBUGOUT("Full Duplex\n"); } else { @@ -3052,18 +3067,18 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, * if it is operating at half duplex. Here we set the duplex settings to * match the duplex in the link partner's capabilities. */ - if(hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { + if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) { ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if(!(phy_data & NWAY_ER_LP_NWAY_CAPS)) + if (!(phy_data & NWAY_ER_LP_NWAY_CAPS)) *duplex = HALF_DUPLEX; else { ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) || + if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) || (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS))) *duplex = HALF_DUPLEX; } @@ -3104,17 +3119,17 @@ e1000_wait_autoneg(struct e1000_hw *hw) DEBUGOUT("Waiting for Auto-Neg to complete.\n"); /* We will wait for autoneg to complete or 4.5 seconds to expire. */ - for(i = PHY_AUTO_NEG_TIME; i > 0; i--) { + for (i = PHY_AUTO_NEG_TIME; i > 0; i--) { /* Read the MII Status Register and wait for Auto-Neg * Complete bit to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if(phy_data & MII_SR_AUTONEG_COMPLETE) { + if (phy_data & MII_SR_AUTONEG_COMPLETE) { return E1000_SUCCESS; } msec_delay(100); @@ -3187,14 +3202,16 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw, /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); - while(mask) { + while (mask) { /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and * then raising and lowering the Management Data Clock. A "0" is * shifted out to the PHY by setting the MDIO bit to "0" and then * raising and lowering the clock. */ - if(data & mask) ctrl |= E1000_CTRL_MDIO; - else ctrl &= ~E1000_CTRL_MDIO; + if (data & mask) + ctrl |= E1000_CTRL_MDIO; + else + ctrl &= ~E1000_CTRL_MDIO; E1000_WRITE_REG(hw, CTRL, ctrl); E1000_WRITE_FLUSH(hw); @@ -3245,12 +3262,13 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw) e1000_raise_mdi_clk(hw, &ctrl); e1000_lower_mdi_clk(hw, &ctrl); - for(data = 0, i = 0; i < 16; i++) { + for (data = 0, i = 0; i < 16; i++) { data = data << 1; e1000_raise_mdi_clk(hw, &ctrl); ctrl = E1000_READ_REG(hw, CTRL); /* Check to see if we shifted in a "1". */ - if(ctrl & E1000_CTRL_MDIO) data |= 1; + if (ctrl & E1000_CTRL_MDIO) + data |= 1; e1000_lower_mdi_clk(hw, &ctrl); } @@ -3276,7 +3294,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) if (!hw->swfw_sync_present) return e1000_get_hw_eeprom_semaphore(hw); - while(timeout) { + while (timeout) { if (e1000_get_hw_eeprom_semaphore(hw)) return -E1000_ERR_SWFW_SYNC; @@ -3365,7 +3383,7 @@ e1000_read_phy_reg(struct e1000_hw *hw, (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); - if(ret_val) { + if (ret_val) { e1000_swfw_sync_release(hw, swfw); return ret_val; } @@ -3410,12 +3428,12 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, DEBUGFUNC("e1000_read_phy_reg_ex"); - if(reg_addr > MAX_PHY_REG_ADDRESS) { + if (reg_addr > MAX_PHY_REG_ADDRESS) { DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; } - if(hw->mac_type > e1000_82543) { + if (hw->mac_type > e1000_82543) { /* Set up Op-code, Phy Address, and register address in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. @@ -3427,16 +3445,16 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, E1000_WRITE_REG(hw, MDIC, mdic); /* Poll the ready bit to see if the MDI read completed */ - for(i = 0; i < 64; i++) { + for (i = 0; i < 64; i++) { udelay(50); mdic = E1000_READ_REG(hw, MDIC); - if(mdic & E1000_MDIC_READY) break; + if (mdic & E1000_MDIC_READY) break; } - if(!(mdic & E1000_MDIC_READY)) { + if (!(mdic & E1000_MDIC_READY)) { DEBUGOUT("MDI Read did not complete\n"); return -E1000_ERR_PHY; } - if(mdic & E1000_MDIC_ERROR) { + if (mdic & E1000_MDIC_ERROR) { DEBUGOUT("MDI Error\n"); return -E1000_ERR_PHY; } @@ -3505,7 +3523,7 @@ e1000_write_phy_reg(struct e1000_hw *hw, (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); - if(ret_val) { + if (ret_val) { e1000_swfw_sync_release(hw, swfw); return ret_val; } @@ -3550,12 +3568,12 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, DEBUGFUNC("e1000_write_phy_reg_ex"); - if(reg_addr > MAX_PHY_REG_ADDRESS) { + if (reg_addr > MAX_PHY_REG_ADDRESS) { DEBUGOUT1("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; } - if(hw->mac_type > e1000_82543) { + if (hw->mac_type > e1000_82543) { /* Set up Op-code, Phy Address, register address, and data intended * for the PHY register in the MDI Control register. The MAC will take * care of interfacing with the PHY to send the desired data. @@ -3568,12 +3586,12 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, E1000_WRITE_REG(hw, MDIC, mdic); /* Poll the ready bit to see if the MDI read completed */ - for(i = 0; i < 640; i++) { + for (i = 0; i < 641; i++) { udelay(5); mdic = E1000_READ_REG(hw, MDIC); - if(mdic & E1000_MDIC_READY) break; + if (mdic & E1000_MDIC_READY) break; } - if(!(mdic & E1000_MDIC_READY)) { + if (!(mdic & E1000_MDIC_READY)) { DEBUGOUT("MDI Write did not complete\n"); return -E1000_ERR_PHY; } @@ -3685,7 +3703,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) DEBUGOUT("Resetting Phy...\n"); - if(hw->mac_type > e1000_82543) { + if (hw->mac_type > e1000_82543) { if ((hw->mac_type == e1000_80003es2lan) && (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) { swfw = E1000_SWFW_PHY1_SM; @@ -3733,7 +3751,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) } udelay(150); - if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { /* Configure activity LED after PHY reset */ led_ctrl = E1000_READ_REG(hw, LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; @@ -3743,14 +3761,13 @@ e1000_phy_hw_reset(struct e1000_hw *hw) /* Wait for FW to finish PHY configuration. */ ret_val = e1000_get_phy_cfg_done(hw); + if (ret_val != E1000_SUCCESS) + return ret_val; e1000_release_software_semaphore(hw); - if ((hw->mac_type == e1000_ich8lan) && - (hw->phy_type == e1000_phy_igp_3)) { - ret_val = e1000_init_lcd_from_nvm(hw); - if (ret_val) - return ret_val; - } + if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3)) + ret_val = e1000_init_lcd_from_nvm(hw); + return ret_val; } @@ -3781,25 +3798,25 @@ e1000_phy_reset(struct e1000_hw *hw) case e1000_82572: case e1000_ich8lan: ret_val = e1000_phy_hw_reset(hw); - if(ret_val) + if (ret_val) return ret_val; break; default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= MII_CR_RESET; ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if(ret_val) + if (ret_val) return ret_val; udelay(1); break; } - if(hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) + if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) e1000_phy_init_script(hw); return E1000_SUCCESS; @@ -3877,8 +3894,8 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) if (hw->kmrn_lock_loss_workaround_disabled) return E1000_SUCCESS; - /* Make sure link is up before proceeding. If not just return. - * Attempting this while link is negotiating fouls up link + /* Make sure link is up before proceeding. If not just return. + * Attempting this while link is negotiating fouled up link * stability */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); @@ -3955,34 +3972,34 @@ e1000_detect_gig_phy(struct e1000_hw *hw) hw->phy_id = (uint32_t) (phy_id_high << 16); udelay(20); ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); - if(ret_val) + if (ret_val) return ret_val; hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK); hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK; - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82543: - if(hw->phy_id == M88E1000_E_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1000_E_PHY_ID) match = TRUE; break; case e1000_82544: - if(hw->phy_id == M88E1000_I_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1000_I_PHY_ID) match = TRUE; break; case e1000_82540: case e1000_82545: case e1000_82545_rev_3: case e1000_82546: case e1000_82546_rev_3: - if(hw->phy_id == M88E1011_I_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1011_I_PHY_ID) match = TRUE; break; case e1000_82541: case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: - if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE; + if (hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE; break; case e1000_82573: - if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; break; case e1000_80003es2lan: if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE; @@ -4021,14 +4038,14 @@ e1000_phy_reset_dsp(struct e1000_hw *hw) do { if (hw->phy_type != e1000_phy_gg82563) { ret_val = e1000_write_phy_reg(hw, 29, 0x001d); - if(ret_val) break; + if (ret_val) break; } ret_val = e1000_write_phy_reg(hw, 30, 0x00c1); - if(ret_val) break; + if (ret_val) break; ret_val = e1000_write_phy_reg(hw, 30, 0x0000); - if(ret_val) break; + if (ret_val) break; ret_val = E1000_SUCCESS; - } while(0); + } while (0); return ret_val; } @@ -4060,23 +4077,23 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, /* Check polarity status */ ret_val = e1000_check_polarity(hw, &polarity); - if(ret_val) + if (ret_val) return ret_val; phy_info->cable_polarity = polarity; ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_info->mdix_mode = (phy_data & IGP01E1000_PSSR_MDIX) >> IGP01E1000_PSSR_MDIX_SHIFT; - if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == + if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { /* Local/Remote Receiver Information are only valid at 1000 Mbps */ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> @@ -4086,19 +4103,19 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, /* Get cable length */ ret_val = e1000_get_cable_length(hw, &min_length, &max_length); - if(ret_val) + if (ret_val) return ret_val; /* Translate to old method */ average = (max_length + min_length) / 2; - if(average <= e1000_igp_cable_length_50) + if (average <= e1000_igp_cable_length_50) phy_info->cable_length = e1000_cable_length_50; - else if(average <= e1000_igp_cable_length_80) + else if (average <= e1000_igp_cable_length_80) phy_info->cable_length = e1000_cable_length_50_80; - else if(average <= e1000_igp_cable_length_110) + else if (average <= e1000_igp_cable_length_110) phy_info->cable_length = e1000_cable_length_80_110; - else if(average <= e1000_igp_cable_length_140) + else if (average <= e1000_igp_cable_length_140) phy_info->cable_length = e1000_cable_length_110_140; else phy_info->cable_length = e1000_cable_length_140; @@ -4174,7 +4191,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, phy_info->downshift = (e1000_downshift)hw->speed_downgraded; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_info->extended_10bt_distance = @@ -4186,12 +4203,12 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, /* Check polarity status */ ret_val = e1000_check_polarity(hw, &polarity); - if(ret_val) + if (ret_val) return ret_val; phy_info->cable_polarity = polarity; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX) >> @@ -4214,7 +4231,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, } ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> @@ -4251,20 +4268,20 @@ e1000_phy_get_info(struct e1000_hw *hw, phy_info->local_rx = e1000_1000t_rx_status_undefined; phy_info->remote_rx = e1000_1000t_rx_status_undefined; - if(hw->media_type != e1000_media_type_copper) { + if (hw->media_type != e1000_media_type_copper) { DEBUGOUT("PHY info is only valid for copper media\n"); return -E1000_ERR_CONFIG; } ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - if((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) { + if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) { DEBUGOUT("PHY info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -4284,7 +4301,7 @@ e1000_validate_mdi_setting(struct e1000_hw *hw) { DEBUGFUNC("e1000_validate_mdi_settings"); - if(!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { + if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) { DEBUGOUT("Invalid MDI setting detected\n"); hw->mdix = 1; return -E1000_ERR_CONFIG; @@ -4331,7 +4348,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->type = e1000_eeprom_microwire; eeprom->opcode_bits = 3; eeprom->delay_usec = 50; - if(eecd & E1000_EECD_SIZE) { + if (eecd & E1000_EECD_SIZE) { eeprom->word_size = 256; eeprom->address_bits = 8; } else { @@ -4399,7 +4416,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) } eeprom->use_eerd = TRUE; eeprom->use_eewr = TRUE; - if(e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { eeprom->type = e1000_eeprom_flash; eeprom->word_size = 2048; @@ -4460,17 +4477,17 @@ e1000_init_eeprom_params(struct e1000_hw *hw) /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to * 32KB (incremented by powers of 2). */ - if(hw->mac_type <= e1000_82547_rev_2) { + if (hw->mac_type <= e1000_82547_rev_2) { /* Set to default value for initial eeprom read. */ eeprom->word_size = 64; ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); - if(ret_val) + if (ret_val) return ret_val; eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; /* 256B eeprom size was not supported in earlier hardware, so we * bump eeprom_size up one to ensure that "1" (which maps to 256B) * is never the result used in the shifting logic below. */ - if(eeprom_size) + if (eeprom_size) eeprom_size++; } else { eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >> @@ -4555,7 +4572,7 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw, */ eecd &= ~E1000_EECD_DI; - if(data & mask) + if (data & mask) eecd |= E1000_EECD_DI; E1000_WRITE_REG(hw, EECD, eecd); @@ -4568,7 +4585,7 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw, mask = mask >> 1; - } while(mask); + } while (mask); /* We leave the "DI" bit set to "0" when we leave this routine. */ eecd &= ~E1000_EECD_DI; @@ -4600,14 +4617,14 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw, eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); data = 0; - for(i = 0; i < count; i++) { + for (i = 0; i < count; i++) { data = data << 1; e1000_raise_ee_clk(hw, &eecd); eecd = E1000_READ_REG(hw, EECD); eecd &= ~(E1000_EECD_DI); - if(eecd & E1000_EECD_DO) + if (eecd & E1000_EECD_DO) data |= 1; e1000_lower_ee_clk(hw, &eecd); @@ -4638,17 +4655,17 @@ e1000_acquire_eeprom(struct e1000_hw *hw) if (hw->mac_type != e1000_82573) { /* Request EEPROM Access */ - if(hw->mac_type > e1000_82544) { + if (hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); eecd = E1000_READ_REG(hw, EECD); - while((!(eecd & E1000_EECD_GNT)) && + while ((!(eecd & E1000_EECD_GNT)) && (i < E1000_EEPROM_GRANT_ATTEMPTS)) { i++; udelay(5); eecd = E1000_READ_REG(hw, EECD); } - if(!(eecd & E1000_EECD_GNT)) { + if (!(eecd & E1000_EECD_GNT)) { eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); DEBUGOUT("Could not acquire EEPROM grant\n"); @@ -4691,7 +4708,7 @@ e1000_standby_eeprom(struct e1000_hw *hw) eecd = E1000_READ_REG(hw, EECD); - if(eeprom->type == e1000_eeprom_microwire) { + if (eeprom->type == e1000_eeprom_microwire) { eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); E1000_WRITE_REG(hw, EECD, eecd); E1000_WRITE_FLUSH(hw); @@ -4714,7 +4731,7 @@ e1000_standby_eeprom(struct e1000_hw *hw) E1000_WRITE_REG(hw, EECD, eecd); E1000_WRITE_FLUSH(hw); udelay(eeprom->delay_usec); - } else if(eeprom->type == e1000_eeprom_spi) { + } else if (eeprom->type == e1000_eeprom_spi) { /* Toggle CS to flush commands */ eecd |= E1000_EECD_CS; E1000_WRITE_REG(hw, EECD, eecd); @@ -4748,7 +4765,7 @@ e1000_release_eeprom(struct e1000_hw *hw) E1000_WRITE_REG(hw, EECD, eecd); udelay(hw->eeprom.delay_usec); - } else if(hw->eeprom.type == e1000_eeprom_microwire) { + } else if (hw->eeprom.type == e1000_eeprom_microwire) { /* cleanup eeprom */ /* CS on Microwire is active-high */ @@ -4770,7 +4787,7 @@ e1000_release_eeprom(struct e1000_hw *hw) } /* Stop requesting EEPROM access */ - if(hw->mac_type > e1000_82544) { + if (hw->mac_type > e1000_82544) { eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); } @@ -4808,12 +4825,12 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw) retry_count += 5; e1000_standby_eeprom(hw); - } while(retry_count < EEPROM_MAX_RETRY_SPI); + } while (retry_count < EEPROM_MAX_RETRY_SPI); /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and * only 0-5mSec on 5V devices) */ - if(retry_count >= EEPROM_MAX_RETRY_SPI) { + if (retry_count >= EEPROM_MAX_RETRY_SPI) { DEBUGOUT("SPI EEPROM Status error\n"); return -E1000_ERR_EEPROM; } @@ -4844,7 +4861,7 @@ e1000_read_eeprom(struct e1000_hw *hw, /* A check for invalid values: offset too large, too many words, and not * enough words. */ - if((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || + if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { DEBUGOUT("\"words\" parameter out of bounds\n"); return -E1000_ERR_EEPROM; @@ -4852,7 +4869,7 @@ e1000_read_eeprom(struct e1000_hw *hw, /* FLASH reads without acquiring the semaphore are safe */ if (e1000_is_onboard_nvm_eeprom(hw) == TRUE && - hw->eeprom.use_eerd == FALSE) { + hw->eeprom.use_eerd == FALSE) { switch (hw->mac_type) { case e1000_80003es2lan: break; @@ -4879,7 +4896,7 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t word_in; uint8_t read_opcode = EEPROM_READ_OPCODE_SPI; - if(e1000_spi_eeprom_ready(hw)) { + if (e1000_spi_eeprom_ready(hw)) { e1000_release_eeprom(hw); return -E1000_ERR_EEPROM; } @@ -4887,7 +4904,7 @@ e1000_read_eeprom(struct e1000_hw *hw, e1000_standby_eeprom(hw); /* Some SPI eeproms use the 8th address bit embedded in the opcode */ - if((eeprom->address_bits == 8) && (offset >= 128)) + if ((eeprom->address_bits == 8) && (offset >= 128)) read_opcode |= EEPROM_A8_OPCODE_SPI; /* Send the READ command (opcode + addr) */ @@ -4903,7 +4920,7 @@ e1000_read_eeprom(struct e1000_hw *hw, word_in = e1000_shift_in_ee_bits(hw, 16); data[i] = (word_in >> 8) | (word_in << 8); } - } else if(eeprom->type == e1000_eeprom_microwire) { + } else if (eeprom->type == e1000_eeprom_microwire) { for (i = 0; i < words; i++) { /* Send the READ command (opcode + addr) */ e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE, @@ -4948,7 +4965,7 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, E1000_WRITE_REG(hw, EERD, eerd); error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); - if(error) { + if (error) { break; } data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); @@ -4985,7 +5002,7 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw, E1000_EEPROM_RW_REG_START; error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); - if(error) { + if (error) { break; } @@ -4993,7 +5010,7 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw, error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); - if(error) { + if (error) { break; } } @@ -5014,13 +5031,13 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) uint32_t i, reg = 0; int32_t done = E1000_ERR_EEPROM; - for(i = 0; i < attempts; i++) { - if(eerd == E1000_EEPROM_POLL_READ) + for (i = 0; i < attempts; i++) { + if (eerd == E1000_EEPROM_POLL_READ) reg = E1000_READ_REG(hw, EERD); else reg = E1000_READ_REG(hw, EEWR); - if(reg & E1000_EEPROM_RW_REG_DONE) { + if (reg & E1000_EEPROM_RW_REG_DONE) { done = E1000_SUCCESS; break; } @@ -5052,7 +5069,7 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) eecd = ((eecd >> 15) & 0x03); /* If both bits are set, device is Flash type */ - if(eecd == 0x03) { + if (eecd == 0x03) { return FALSE; } } @@ -5117,7 +5134,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) checksum += eeprom_data; } - if(checksum == (uint16_t) EEPROM_SUM) + if (checksum == (uint16_t) EEPROM_SUM) return E1000_SUCCESS; else { DEBUGOUT("EEPROM Checksum Invalid\n"); @@ -5142,15 +5159,15 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) DEBUGFUNC("e1000_update_eeprom_checksum"); - for(i = 0; i < EEPROM_CHECKSUM_REG; i++) { - if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { + for (i = 0; i < EEPROM_CHECKSUM_REG; i++) { + if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } checksum += eeprom_data; } checksum = (uint16_t) EEPROM_SUM - checksum; - if(e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { + if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { DEBUGOUT("EEPROM Write Error\n"); return -E1000_ERR_EEPROM; } else if (hw->eeprom.type == e1000_eeprom_flash) { @@ -5192,14 +5209,14 @@ e1000_write_eeprom(struct e1000_hw *hw, /* A check for invalid values: offset too large, too many words, and not * enough words. */ - if((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || + if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { DEBUGOUT("\"words\" parameter out of bounds\n"); return -E1000_ERR_EEPROM; } /* 82573 writes only through eewr */ - if(eeprom->use_eewr == TRUE) + if (eeprom->use_eewr == TRUE) return e1000_write_eeprom_eewr(hw, offset, words, data); if (eeprom->type == e1000_eeprom_ich8) @@ -5209,7 +5226,7 @@ e1000_write_eeprom(struct e1000_hw *hw, if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; - if(eeprom->type == e1000_eeprom_microwire) { + if (eeprom->type == e1000_eeprom_microwire) { status = e1000_write_eeprom_microwire(hw, offset, words, data); } else { status = e1000_write_eeprom_spi(hw, offset, words, data); @@ -5245,7 +5262,7 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, while (widx < words) { uint8_t write_opcode = EEPROM_WRITE_OPCODE_SPI; - if(e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM; + if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM; e1000_standby_eeprom(hw); @@ -5256,7 +5273,7 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, e1000_standby_eeprom(hw); /* Some SPI eeproms use the 8th address bit embedded in the opcode */ - if((eeprom->address_bits == 8) && (offset >= 128)) + if ((eeprom->address_bits == 8) && (offset >= 128)) write_opcode |= EEPROM_A8_OPCODE_SPI; /* Send the Write command (8-bit opcode + addr) */ @@ -5278,7 +5295,7 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, * operation, while the smaller eeproms are capable of an 8-byte * PAGE WRITE operation. Break the inner loop to pass new address */ - if((((offset + widx)*2) % eeprom->page_size) == 0) { + if ((((offset + widx)*2) % eeprom->page_size) == 0) { e1000_standby_eeprom(hw); break; } @@ -5344,12 +5361,12 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, * signal that the command has been completed by raising the DO signal. * If DO does not go high in 10 milliseconds, then error out. */ - for(i = 0; i < 200; i++) { + for (i = 0; i < 200; i++) { eecd = E1000_READ_REG(hw, EECD); - if(eecd & E1000_EECD_DO) break; + if (eecd & E1000_EECD_DO) break; udelay(50); } - if(i == 200) { + if (i == 200) { DEBUGOUT("EEPROM Write did not complete\n"); return -E1000_ERR_EEPROM; } @@ -5540,40 +5557,6 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) } /****************************************************************************** - * Reads the adapter's part number from the EEPROM - * - * hw - Struct containing variables accessed by shared code - * part_num - Adapter's part number - *****************************************************************************/ -int32_t -e1000_read_part_num(struct e1000_hw *hw, - uint32_t *part_num) -{ - uint16_t offset = EEPROM_PBA_BYTE_1; - uint16_t eeprom_data; - - DEBUGFUNC("e1000_read_part_num"); - - /* Get word 0 from EEPROM */ - if(e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - /* Save word 0 in upper half of part_num */ - *part_num = (uint32_t) (eeprom_data << 16); - - /* Get word 1 from EEPROM */ - if(e1000_read_eeprom(hw, ++offset, 1, &eeprom_data) < 0) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - /* Save word 1 in lower half of part_num */ - *part_num |= eeprom_data; - - return E1000_SUCCESS; -} - -/****************************************************************************** * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the * second function of dual function devices * @@ -5587,9 +5570,9 @@ e1000_read_mac_addr(struct e1000_hw * hw) DEBUGFUNC("e1000_read_mac_addr"); - for(i = 0; i < NODE_ADDRESS_SIZE; i += 2) { + for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) { offset = i >> 1; - if(e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { + if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -5604,12 +5587,12 @@ e1000_read_mac_addr(struct e1000_hw * hw) case e1000_82546_rev_3: case e1000_82571: case e1000_80003es2lan: - if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) hw->perm_mac_addr[5] ^= 0x01; break; } - for(i = 0; i < NODE_ADDRESS_SIZE; i++) + for (i = 0; i < NODE_ADDRESS_SIZE; i++) hw->mac_addr[i] = hw->perm_mac_addr[i]; return E1000_SUCCESS; } @@ -5648,7 +5631,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw) /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); - for(i = 1; i < rar_num; i++) { + for (i = 1; i < rar_num; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -5699,7 +5682,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) num_rar_entry -= 1; - for(i = rar_used_count; i < num_rar_entry; i++) { + for (i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_FLUSH(hw); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -5711,13 +5694,13 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, num_mta_entry = E1000_NUM_MTA_REGISTERS; if (hw->mac_type == e1000_ich8lan) num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN; - for(i = 0; i < num_mta_entry; i++) { + for (i = 0; i < num_mta_entry; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); E1000_WRITE_FLUSH(hw); } /* Add the new addresses */ - for(i = 0; i < mc_addr_count; i++) { + for (i = 0; i < mc_addr_count; i++) { DEBUGOUT(" Adding the multicast addresses:\n"); DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i, mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad)], @@ -5849,7 +5832,7 @@ e1000_mta_set(struct e1000_hw *hw, * in the MTA, save off the previous entry before writing and * restore the old value after writing. */ - if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) { + if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) { temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1)); E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta); E1000_WRITE_FLUSH(hw); @@ -5999,7 +5982,7 @@ e1000_id_led_init(struct e1000_hw * hw) DEBUGFUNC("e1000_id_led_init"); - if(hw->mac_type < e1000_82540) { + if (hw->mac_type < e1000_82540) { /* Nothing to do */ return E1000_SUCCESS; } @@ -6009,7 +5992,7 @@ e1000_id_led_init(struct e1000_hw * hw) hw->ledctl_mode1 = hw->ledctl_default; hw->ledctl_mode2 = hw->ledctl_default; - if(e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) { + if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -6026,7 +6009,7 @@ e1000_id_led_init(struct e1000_hw * hw) } for (i = 0; i < 4; i++) { temp = (eeprom_data >> (i << 2)) & led_mask; - switch(temp) { + switch (temp) { case ID_LED_ON1_DEF2: case ID_LED_ON1_ON2: case ID_LED_ON1_OFF2: @@ -6043,7 +6026,7 @@ e1000_id_led_init(struct e1000_hw * hw) /* Do nothing */ break; } - switch(temp) { + switch (temp) { case ID_LED_DEF1_ON2: case ID_LED_ON1_ON2: case ID_LED_OFF1_ON2: @@ -6077,7 +6060,7 @@ e1000_setup_led(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_led"); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: case e1000_82543: @@ -6091,16 +6074,16 @@ e1000_setup_led(struct e1000_hw *hw) /* Turn off PHY Smart Power Down (if enabled) */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &hw->phy_spd_default); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, (uint16_t)(hw->phy_spd_default & ~IGP01E1000_GMII_SPD)); - if(ret_val) + if (ret_val) return ret_val; /* Fall Through */ default: - if(hw->media_type == e1000_media_type_fiber) { + if (hw->media_type == e1000_media_type_fiber) { ledctl = E1000_READ_REG(hw, LEDCTL); /* Save current LEDCTL settings */ hw->ledctl_default = ledctl; @@ -6111,7 +6094,7 @@ e1000_setup_led(struct e1000_hw *hw) ledctl |= (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT); E1000_WRITE_REG(hw, LEDCTL, ledctl); - } else if(hw->media_type == e1000_media_type_copper) + } else if (hw->media_type == e1000_media_type_copper) E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1); break; } @@ -6119,6 +6102,7 @@ e1000_setup_led(struct e1000_hw *hw) return E1000_SUCCESS; } + /****************************************************************************** * Used on 82571 and later Si that has LED blink bits. * Callers must use their own timer and should have already called @@ -6169,7 +6153,7 @@ e1000_cleanup_led(struct e1000_hw *hw) DEBUGFUNC("e1000_cleanup_led"); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: case e1000_82543: @@ -6183,7 +6167,7 @@ e1000_cleanup_led(struct e1000_hw *hw) /* Turn on PHY Smart Power Down (if previously enabled) */ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, hw->phy_spd_default); - if(ret_val) + if (ret_val) return ret_val; /* Fall Through */ default: @@ -6211,7 +6195,7 @@ e1000_led_on(struct e1000_hw *hw) DEBUGFUNC("e1000_led_on"); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: case e1000_82543: @@ -6220,7 +6204,7 @@ e1000_led_on(struct e1000_hw *hw) ctrl |= E1000_CTRL_SWDPIO0; break; case e1000_82544: - if(hw->media_type == e1000_media_type_fiber) { + if (hw->media_type == e1000_media_type_fiber) { /* Set SW Defineable Pin 0 to turn on the LED */ ctrl |= E1000_CTRL_SWDPIN0; ctrl |= E1000_CTRL_SWDPIO0; @@ -6231,7 +6215,7 @@ e1000_led_on(struct e1000_hw *hw) } break; default: - if(hw->media_type == e1000_media_type_fiber) { + if (hw->media_type == e1000_media_type_fiber) { /* Clear SW Defineable Pin 0 to turn on the LED */ ctrl &= ~E1000_CTRL_SWDPIN0; ctrl |= E1000_CTRL_SWDPIO0; @@ -6262,7 +6246,7 @@ e1000_led_off(struct e1000_hw *hw) DEBUGFUNC("e1000_led_off"); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: case e1000_82543: @@ -6271,7 +6255,7 @@ e1000_led_off(struct e1000_hw *hw) ctrl |= E1000_CTRL_SWDPIO0; break; case e1000_82544: - if(hw->media_type == e1000_media_type_fiber) { + if (hw->media_type == e1000_media_type_fiber) { /* Clear SW Defineable Pin 0 to turn off the LED */ ctrl &= ~E1000_CTRL_SWDPIN0; ctrl |= E1000_CTRL_SWDPIO0; @@ -6282,7 +6266,7 @@ e1000_led_off(struct e1000_hw *hw) } break; default: - if(hw->media_type == e1000_media_type_fiber) { + if (hw->media_type == e1000_media_type_fiber) { /* Set SW Defineable Pin 0 to turn off the LED */ ctrl |= E1000_CTRL_SWDPIN0; ctrl |= E1000_CTRL_SWDPIO0; @@ -6306,7 +6290,7 @@ e1000_led_off(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void +void e1000_clear_hw_cntrs(struct e1000_hw *hw) { volatile uint32_t temp; @@ -6369,7 +6353,7 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, MPTC); temp = E1000_READ_REG(hw, BPTC); - if(hw->mac_type < e1000_82543) return; + if (hw->mac_type < e1000_82543) return; temp = E1000_READ_REG(hw, ALGNERRC); temp = E1000_READ_REG(hw, RXERRC); @@ -6378,13 +6362,13 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, TSCTC); temp = E1000_READ_REG(hw, TSCTFC); - if(hw->mac_type <= e1000_82544) return; + if (hw->mac_type <= e1000_82544) return; temp = E1000_READ_REG(hw, MGTPRC); temp = E1000_READ_REG(hw, MGTPDC); temp = E1000_READ_REG(hw, MGTPTC); - if(hw->mac_type <= e1000_82547_rev_2) return; + if (hw->mac_type <= e1000_82547_rev_2) return; temp = E1000_READ_REG(hw, IAC); temp = E1000_READ_REG(hw, ICRXOC); @@ -6415,8 +6399,8 @@ e1000_reset_adaptive(struct e1000_hw *hw) { DEBUGFUNC("e1000_reset_adaptive"); - if(hw->adaptive_ifs) { - if(!hw->ifs_params_forced) { + if (hw->adaptive_ifs) { + if (!hw->ifs_params_forced) { hw->current_ifs_val = 0; hw->ifs_min_val = IFS_MIN; hw->ifs_max_val = IFS_MAX; @@ -6443,12 +6427,12 @@ e1000_update_adaptive(struct e1000_hw *hw) { DEBUGFUNC("e1000_update_adaptive"); - if(hw->adaptive_ifs) { - if((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) { - if(hw->tx_packet_delta > MIN_NUM_XMITS) { + if (hw->adaptive_ifs) { + if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) { + if (hw->tx_packet_delta > MIN_NUM_XMITS) { hw->in_ifs_mode = TRUE; - if(hw->current_ifs_val < hw->ifs_max_val) { - if(hw->current_ifs_val == 0) + if (hw->current_ifs_val < hw->ifs_max_val) { + if (hw->current_ifs_val == 0) hw->current_ifs_val = hw->ifs_min_val; else hw->current_ifs_val += hw->ifs_step_size; @@ -6456,7 +6440,7 @@ e1000_update_adaptive(struct e1000_hw *hw) } } } else { - if(hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { + if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { hw->current_ifs_val = 0; hw->in_ifs_mode = FALSE; E1000_WRITE_REG(hw, AIT, 0); @@ -6503,46 +6487,46 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw, * This could be simplified if all environments supported * 64-bit integers. */ - if(carry_bit && ((stats->gorcl & 0x80000000) == 0)) + if (carry_bit && ((stats->gorcl & 0x80000000) == 0)) stats->gorch++; /* Is this a broadcast or multicast? Check broadcast first, * since the test for a multicast frame will test positive on * a broadcast frame. */ - if((mac_addr[0] == (uint8_t) 0xff) && (mac_addr[1] == (uint8_t) 0xff)) + if ((mac_addr[0] == (uint8_t) 0xff) && (mac_addr[1] == (uint8_t) 0xff)) /* Broadcast packet */ stats->bprc++; - else if(*mac_addr & 0x01) + else if (*mac_addr & 0x01) /* Multicast packet */ stats->mprc++; - if(frame_len == hw->max_frame_size) { + if (frame_len == hw->max_frame_size) { /* In this case, the hardware has overcounted the number of * oversize frames. */ - if(stats->roc > 0) + if (stats->roc > 0) stats->roc--; } /* Adjust the bin counters when the extra byte put the frame in the * wrong bin. Remember that the frame_len was adjusted above. */ - if(frame_len == 64) { + if (frame_len == 64) { stats->prc64++; stats->prc127--; - } else if(frame_len == 127) { + } else if (frame_len == 127) { stats->prc127++; stats->prc255--; - } else if(frame_len == 255) { + } else if (frame_len == 255) { stats->prc255++; stats->prc511--; - } else if(frame_len == 511) { + } else if (frame_len == 511) { stats->prc511++; stats->prc1023--; - } else if(frame_len == 1023) { + } else if (frame_len == 1023) { stats->prc1023++; stats->prc1522--; - } else if(frame_len == 1522) { + } else if (frame_len == 1522) { stats->prc1522++; } } @@ -6582,10 +6566,10 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? e1000_bus_type_pcix : e1000_bus_type_pci; - if(hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) { + if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) { hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ? e1000_bus_speed_66 : e1000_bus_speed_120; - } else if(hw->bus_type == e1000_bus_type_pci) { + } else if (hw->bus_type == e1000_bus_type_pci) { hw->bus_speed = (status & E1000_STATUS_PCI66) ? e1000_bus_speed_66 : e1000_bus_speed_33; } else { @@ -6680,11 +6664,11 @@ e1000_get_cable_length(struct e1000_hw *hw, *min_length = *max_length = 0; /* Use old method for Phy older than IGP */ - if(hw->phy_type == e1000_phy_m88) { + if (hw->phy_type == e1000_phy_m88) { ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT; @@ -6743,7 +6727,7 @@ e1000_get_cable_length(struct e1000_hw *hw, return -E1000_ERR_PHY; break; } - } else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ + } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ uint16_t cur_agc_value; uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE; uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = @@ -6752,10 +6736,10 @@ e1000_get_cable_length(struct e1000_hw *hw, IGP01E1000_PHY_AGC_C, IGP01E1000_PHY_AGC_D}; /* Read the AGC registers for all channels */ - for(i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); - if(ret_val) + if (ret_val) return ret_val; cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT; @@ -6805,7 +6789,7 @@ e1000_get_cable_length(struct e1000_hw *hw, if (ret_val) return ret_val; - /* Getting bits 15:9, which represent the combination of course and + /* Getting bits 15:9, which represent the combination of course and * fine gain values. The result is a number that can be put into * the lookup table to obtain the approximate cable length. */ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & @@ -6870,7 +6854,7 @@ e1000_check_polarity(struct e1000_hw *hw, /* return the Polarity bit in the Status register. */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> M88E1000_PSSR_REV_POLARITY_SHIFT; @@ -6880,18 +6864,18 @@ e1000_check_polarity(struct e1000_hw *hw, /* Read the Status register to check the speed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to * find the polarity status */ - if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == + if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { /* Read the GIG initialization PCS register (0x00B4) */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG, &phy_data); - if(ret_val) + if (ret_val) return ret_val; /* Check the polarity bits */ @@ -6940,7 +6924,7 @@ e1000_check_downshift(struct e1000_hw *hw) hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); - if(ret_val) + if (ret_val) return ret_val; hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0; @@ -6948,7 +6932,7 @@ e1000_check_downshift(struct e1000_hw *hw) (hw->phy_type == e1000_phy_gg82563)) { ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> @@ -6988,42 +6972,42 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, DEBUGFUNC("e1000_config_dsp_after_link_change"); - if(hw->phy_type != e1000_phy_igp) + if (hw->phy_type != e1000_phy_igp) return E1000_SUCCESS; - if(link_up) { + if (link_up) { ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex); - if(ret_val) { + if (ret_val) { DEBUGOUT("Error getting link speed and duplex\n"); return ret_val; } - if(speed == SPEED_1000) { + if (speed == SPEED_1000) { ret_val = e1000_get_cable_length(hw, &min_length, &max_length); if (ret_val) return ret_val; - if((hw->dsp_config_state == e1000_dsp_config_enabled) && + if ((hw->dsp_config_state == e1000_dsp_config_enabled) && min_length >= e1000_igp_cable_length_50) { - for(i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i], phy_data); - if(ret_val) + if (ret_val) return ret_val; } hw->dsp_config_state = e1000_dsp_config_activated; } - if((hw->ffe_config_state == e1000_ffe_config_enabled) && + if ((hw->ffe_config_state == e1000_ffe_config_enabled) && (min_length < e1000_igp_cable_length_50)) { uint16_t ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20; @@ -7032,70 +7016,70 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, /* clear previous idle error counts */ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; - for(i = 0; i < ffe_idle_err_timeout; i++) { + for (i = 0; i < ffe_idle_err_timeout; i++) { udelay(1000); ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); - if(ret_val) + if (ret_val) return ret_val; idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT); - if(idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) { + if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) { hw->ffe_config_state = e1000_ffe_config_active; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE, IGP01E1000_PHY_DSP_FFE_CM_CP); - if(ret_val) + if (ret_val) return ret_val; break; } - if(idle_errs) + if (idle_errs) ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100; } } } } else { - if(hw->dsp_config_state == e1000_dsp_config_activated) { + if (hw->dsp_config_state == e1000_dsp_config_activated) { /* Save off the current value of register 0x2F5B to be restored at * the end of the routines. */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - if(ret_val) + if (ret_val) return ret_val; /* Disable the PHY transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); - if(ret_val) + if (ret_val) return ret_val; - for(i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { + for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) { ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX; phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS; ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data); - if(ret_val) + if (ret_val) return ret_val; } ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_RESTART_AUTONEG); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(20); @@ -7103,40 +7087,40 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - if(ret_val) + if (ret_val) return ret_val; hw->dsp_config_state = e1000_dsp_config_enabled; } - if(hw->ffe_config_state == e1000_ffe_config_active) { + if (hw->ffe_config_state == e1000_ffe_config_active) { /* Save off the current value of register 0x2F5B to be restored at * the end of the routines. */ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data); - if(ret_val) + if (ret_val) return ret_val; /* Disable the PHY transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE, IGP01E1000_PHY_DSP_FFE_DEFAULT); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_RESTART_AUTONEG); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(20); @@ -7144,7 +7128,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); - if(ret_val) + if (ret_val) return ret_val; hw->ffe_config_state = e1000_ffe_config_enabled; @@ -7169,20 +7153,20 @@ e1000_set_phy_mode(struct e1000_hw *hw) DEBUGFUNC("e1000_set_phy_mode"); - if((hw->mac_type == e1000_82545_rev_3) && - (hw->media_type == e1000_media_type_copper)) { + if ((hw->mac_type == e1000_82545_rev_3) && + (hw->media_type == e1000_media_type_copper)) { ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data); - if(ret_val) { + if (ret_val) { return ret_val; } - if((eeprom_data != EEPROM_RESERVED_WORD) && - (eeprom_data & EEPROM_PHY_CLASS_A)) { + if ((eeprom_data != EEPROM_RESERVED_WORD) && + (eeprom_data & EEPROM_PHY_CLASS_A)) { ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104); - if(ret_val) + if (ret_val) return ret_val; hw->phy_reset_disable = FALSE; @@ -7233,16 +7217,16 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - if(ret_val) + if (ret_val) return ret_val; } - if(!active) { - if(hw->mac_type == e1000_82541_rev_2 || - hw->mac_type == e1000_82547_rev_2) { + if (!active) { + if (hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { phy_data &= ~IGP01E1000_GMII_FLEX_SPD; ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); - if(ret_val) + if (ret_val) return ret_val; } else { if (hw->mac_type == e1000_ich8lan) { @@ -7264,13 +7248,13 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, if (hw->smart_speed == e1000_smart_speed_on) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if(ret_val) + if (ret_val) return ret_val; } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, @@ -7281,19 +7265,19 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if(ret_val) + if (ret_val) return ret_val; } - } else if((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) || - (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || - (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { + } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) || + (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || + (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { - if(hw->mac_type == e1000_82541_rev_2 || + if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { phy_data |= IGP01E1000_GMII_FLEX_SPD; ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); - if(ret_val) + if (ret_val) return ret_val; } else { if (hw->mac_type == e1000_ich8lan) { @@ -7310,12 +7294,12 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if(ret_val) + if (ret_val) return ret_val; } @@ -7345,14 +7329,14 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, uint16_t phy_data; DEBUGFUNC("e1000_set_d0_lplu_state"); - if(hw->mac_type <= e1000_82547_rev_2) + if (hw->mac_type <= e1000_82547_rev_2) return E1000_SUCCESS; if (hw->mac_type == e1000_ich8lan) { phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - if(ret_val) + if (ret_val) return ret_val; } @@ -7374,13 +7358,13 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, if (hw->smart_speed == e1000_smart_speed_on) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if(ret_val) + if (ret_val) return ret_val; } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, @@ -7391,7 +7375,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if(ret_val) + if (ret_val) return ret_val; } @@ -7410,12 +7394,12 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); - if(ret_val) + if (ret_val) return ret_val; } @@ -7436,7 +7420,7 @@ e1000_set_vco_speed(struct e1000_hw *hw) DEBUGFUNC("e1000_set_vco_speed"); - switch(hw->mac_type) { + switch (hw->mac_type) { case e1000_82545_rev_3: case e1000_82546_rev_3: break; @@ -7447,39 +7431,39 @@ e1000_set_vco_speed(struct e1000_hw *hw) /* Set PHY register 30, page 5, bit 8 to 0 */ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data &= ~M88E1000_PHY_VCO_REG_BIT8; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); - if(ret_val) + if (ret_val) return ret_val; /* Set PHY register 30, page 4, bit 11 to 1 */ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data); - if(ret_val) + if (ret_val) return ret_val; phy_data |= M88E1000_PHY_VCO_REG_BIT11; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page); - if(ret_val) + if (ret_val) return ret_val; return E1000_SUCCESS; @@ -7558,7 +7542,7 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer, { uint8_t *tmp; uint8_t *bufptr = buffer; - uint32_t data; + uint32_t data = 0; uint16_t remaining, i, j, prev_bytes; /* sum = only sum of the data and it is not checksum */ @@ -7638,7 +7622,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, buffer = (uint8_t *) hdr; i = length; - while(i--) + while (i--) sum += buffer[i]; hdr->checksum = 0 - sum; @@ -7661,8 +7645,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, * returns - E1000_SUCCESS for success. ****************************************************************************/ static int32_t -e1000_mng_write_commit( - struct e1000_hw * hw) +e1000_mng_write_commit(struct e1000_hw * hw) { uint32_t hicr; @@ -7834,31 +7817,31 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) /* Disable the transmitter on the PHY */ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); - if(ret_val) + if (ret_val) return ret_val; /* This loop will early-out if the NO link condition has been met. */ - for(i = PHY_FORCE_TIME; i > 0; i--) { + for (i = PHY_FORCE_TIME; i > 0; i--) { /* Read the MII Status Register and wait for Link Status bit * to be clear. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; - if((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break; + if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break; msec_delay_irq(100); } @@ -7868,40 +7851,40 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) /* Now we will re-enable th transmitter on the PHY */ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(50); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(50); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00); - if(ret_val) + if (ret_val) return ret_val; msec_delay_irq(50); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000); - if(ret_val) + if (ret_val) return ret_val; /* This loop will early-out if the link condition has been met. */ - for(i = PHY_FORCE_TIME; i > 0; i--) { + for (i = PHY_FORCE_TIME; i > 0; i--) { /* Read the MII Status Register and wait for Link Status bit * to be set. */ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg); - if(ret_val) + if (ret_val) return ret_val; - if(mii_status_reg & MII_SR_LINK_STATUS) break; + if (mii_status_reg & MII_SR_LINK_STATUS) break; msec_delay_irq(100); } return E1000_SUCCESS; @@ -7980,15 +7963,15 @@ e1000_disable_pciex_master(struct e1000_hw *hw) e1000_set_pci_express_master_disable(hw); - while(timeout) { - if(!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) + while (timeout) { + if (!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) break; else udelay(100); timeout--; } - if(!timeout) { + if (!timeout) { DEBUGOUT("Master requests are pending.\n"); return -E1000_ERR_MASTER_REQUESTS_PENDING; } @@ -8029,7 +8012,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) timeout--; } - if(!timeout) { + if (!timeout) { DEBUGOUT("Auto read by HW from EEPROM has not completed.\n"); return -E1000_ERR_RESET; } @@ -8110,7 +8093,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_get_hw_eeprom_semaphore"); - if(!hw->eeprom_semaphore_present) + if (!hw->eeprom_semaphore_present) return E1000_SUCCESS; if (hw->mac_type == e1000_80003es2lan) { @@ -8121,20 +8104,20 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) /* Get the FW semaphore. */ timeout = hw->eeprom.word_size + 1; - while(timeout) { + while (timeout) { swsm = E1000_READ_REG(hw, SWSM); swsm |= E1000_SWSM_SWESMBI; E1000_WRITE_REG(hw, SWSM, swsm); /* if we managed to set the bit we got the semaphore. */ swsm = E1000_READ_REG(hw, SWSM); - if(swsm & E1000_SWSM_SWESMBI) + if (swsm & E1000_SWSM_SWESMBI) break; udelay(50); timeout--; } - if(!timeout) { + if (!timeout) { /* Release semaphores */ e1000_put_hw_eeprom_semaphore(hw); DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n"); @@ -8159,7 +8142,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_put_hw_eeprom_semaphore"); - if(!hw->eeprom_semaphore_present) + if (!hw->eeprom_semaphore_present) return; swsm = E1000_READ_REG(hw, SWSM); @@ -8192,16 +8175,16 @@ e1000_get_software_semaphore(struct e1000_hw *hw) if (hw->mac_type != e1000_80003es2lan) return E1000_SUCCESS; - while(timeout) { + while (timeout) { swsm = E1000_READ_REG(hw, SWSM); /* If SMBI bit cleared, it is now set and we hold the semaphore */ - if(!(swsm & E1000_SWSM_SMBI)) + if (!(swsm & E1000_SWSM_SMBI)) break; msec_delay_irq(1); timeout--; } - if(!timeout) { + if (!timeout) { DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); return -E1000_ERR_RESET; } @@ -8277,7 +8260,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) case e1000_82573: case e1000_80003es2lan: fwsm = E1000_READ_REG(hw, FWSM); - if((fwsm & E1000_FWSM_MODE_MASK) != 0) + if ((fwsm & E1000_FWSM_MODE_MASK) != 0) return TRUE; break; case e1000_ich8lan: diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 375b95518c3..a170e96251f 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -336,9 +336,9 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); #define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ #define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ -#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ +#define E1000_MNG_IAMT_MODE 0x3 #define E1000_MNG_ICH_IAMT_MODE 0x2 #define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ @@ -385,7 +385,7 @@ struct e1000_host_mng_dhcp_cookie{ #endif int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, - uint16_t length); + uint16_t length); boolean_t e1000_check_mng_mode(struct e1000_hw *hw); boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); @@ -470,6 +470,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82571EB_COPPER 0x105E #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 +#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 #define E1000_DEV_ID_82572EI_COPPER 0x107D #define E1000_DEV_ID_82572EI_FIBER 0x107E #define E1000_DEV_ID_82572EI_SERDES 0x107F @@ -523,7 +524,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); /* 802.1q VLAN Packet Sizes */ -#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ /* Ethertype field values */ #define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ @@ -697,6 +698,7 @@ union e1000_rx_desc_packet_split { E1000_RXDEXT_STATERR_CXE | \ E1000_RXDEXT_STATERR_RXE) + /* Transmit Descriptor */ struct e1000_tx_desc { uint64_t buffer_addr; /* Address of the descriptor's data buffer */ @@ -2086,7 +2088,7 @@ struct e1000_hw { #define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address * filtering */ #define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ -#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ +#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ @@ -2172,7 +2174,7 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 -/* PCI-Ex registers */ +/* PCI-Ex registers*/ /* PCI-Ex Control Register */ #define E1000_GCR_RXD_NO_SNOOP 0x00000001 @@ -2224,7 +2226,7 @@ struct e1000_host_command_info { #define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */ /* EEPROM Commands - SPI */ -#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ #define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ #define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ #define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ @@ -3082,10 +3084,10 @@ struct e1000_host_command_info { /* DSP Distance Register (Page 5, Register 26) */ #define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M; - 1 = 50-80M; - 2 = 80-110M; - 3 = 110-140M; - 4 = >140M */ + 1 = 50-80M; + 2 = 80-110M; + 3 = 110-140M; + 4 = >140M */ /* Kumeran Mode Control Register (Page 193, Register 16) */ #define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 726f43d5593..1d7c99947e9 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.1.9-k4"DRIVERNAPI +#define DRV_VERSION "7.2.7-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -48,7 +48,6 @@ static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)} */ static struct pci_device_id e1000_pci_tbl[] = { - INTEL_E1000_ETHERNET_DEVICE(0x1000), INTEL_E1000_ETHERNET_DEVICE(0x1001), INTEL_E1000_ETHERNET_DEVICE(0x1004), INTEL_E1000_ETHERNET_DEVICE(0x1008), @@ -99,6 +98,7 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1098), INTEL_E1000_ETHERNET_DEVICE(0x1099), INTEL_E1000_ETHERNET_DEVICE(0x109A), + INTEL_E1000_ETHERNET_DEVICE(0x10A4), INTEL_E1000_ETHERNET_DEVICE(0x10B5), INTEL_E1000_ETHERNET_DEVICE(0x10B9), INTEL_E1000_ETHERNET_DEVICE(0x10BA), @@ -245,7 +245,7 @@ e1000_init_module(void) printk(KERN_INFO "%s\n", e1000_copyright); - ret = pci_module_init(&e1000_driver); + ret = pci_register_driver(&e1000_driver); return ret; } @@ -485,7 +485,7 @@ e1000_up(struct e1000_adapter *adapter) * **/ -static void e1000_power_up_phy(struct e1000_adapter *adapter) +void e1000_power_up_phy(struct e1000_adapter *adapter) { uint16_t mii_reg = 0; @@ -682,9 +682,9 @@ e1000_probe(struct pci_dev *pdev, unsigned long flash_start, flash_len; static int cards_found = 0; - static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */ + static int global_quad_port_a = 0; /* global ksp3 port a indication */ int i, err, pci_using_dac; - uint16_t eeprom_data; + uint16_t eeprom_data = 0; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; if ((err = pci_enable_device(pdev))) return err; @@ -696,21 +696,20 @@ e1000_probe(struct pci_dev *pdev, if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) && (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) { E1000_ERR("No usable DMA configuration, aborting\n"); - return err; + goto err_dma; } pci_using_dac = 0; } if ((err = pci_request_regions(pdev, e1000_driver_name))) - return err; + goto err_pci_reg; pci_set_master(pdev); + err = -ENOMEM; netdev = alloc_etherdev(sizeof(struct e1000_adapter)); - if (!netdev) { - err = -ENOMEM; + if (!netdev) goto err_alloc_etherdev; - } SET_MODULE_OWNER(netdev); SET_NETDEV_DEV(netdev, &pdev->dev); @@ -725,11 +724,10 @@ e1000_probe(struct pci_dev *pdev, mmio_start = pci_resource_start(pdev, BAR_0); mmio_len = pci_resource_len(pdev, BAR_0); + err = -EIO; adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); - if (!adapter->hw.hw_addr) { - err = -EIO; + if (!adapter->hw.hw_addr) goto err_ioremap; - } for (i = BAR_1; i <= BAR_5; i++) { if (pci_resource_len(pdev, i) == 0) @@ -774,6 +772,7 @@ e1000_probe(struct pci_dev *pdev, if ((err = e1000_sw_init(adapter))) goto err_sw_init; + err = -EIO; /* Flash BAR mapping must happen after e1000_sw_init * because it depends on mac_type */ if ((adapter->hw.mac_type == e1000_ich8lan) && @@ -781,24 +780,13 @@ e1000_probe(struct pci_dev *pdev, flash_start = pci_resource_start(pdev, 1); flash_len = pci_resource_len(pdev, 1); adapter->hw.flash_address = ioremap(flash_start, flash_len); - if (!adapter->hw.flash_address) { - err = -EIO; + if (!adapter->hw.flash_address) goto err_flashmap; - } } - if ((err = e1000_check_phy_reset_block(&adapter->hw))) + if (e1000_check_phy_reset_block(&adapter->hw)) DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); - /* if ksp3, indicate if it's port a being setup */ - if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 && - e1000_ksp3_port_a == 0) - adapter->ksp3_port_a = 1; - e1000_ksp3_port_a++; - /* Reset for multiple KP3 adapters */ - if (e1000_ksp3_port_a == 4) - e1000_ksp3_port_a = 0; - if (adapter->hw.mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -830,7 +818,7 @@ e1000_probe(struct pci_dev *pdev, if (e1000_init_eeprom_params(&adapter->hw)) { E1000_ERR("EEPROM initialization failed\n"); - return -EIO; + goto err_eeprom; } /* before reading the EEPROM, reset the controller to @@ -842,7 +830,6 @@ e1000_probe(struct pci_dev *pdev, if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) { DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n"); - err = -EIO; goto err_eeprom; } @@ -855,12 +842,9 @@ e1000_probe(struct pci_dev *pdev, if (!is_valid_ether_addr(netdev->perm_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC Address\n"); - err = -EIO; goto err_eeprom; } - e1000_read_part_num(&adapter->hw, &(adapter->part_num)); - e1000_get_bus_info(&adapter->hw); init_timer(&adapter->tx_fifo_stall_timer); @@ -921,7 +905,38 @@ e1000_probe(struct pci_dev *pdev, break; } if (eeprom_data & eeprom_apme_mask) - adapter->wol |= E1000_WUFC_MAG; + adapter->eeprom_wol |= E1000_WUFC_MAG; + + /* now that we have the eeprom settings, apply the special cases + * where the eeprom may be wrong or the board simply won't support + * wake on lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82546GB_PCIE: + adapter->eeprom_wol = 0; + break; + case E1000_DEV_ID_82546EB_FIBER: + case E1000_DEV_ID_82546GB_FIBER: + case E1000_DEV_ID_82571EB_FIBER: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1) + adapter->eeprom_wol = 0; + break; + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + case E1000_DEV_ID_82571EB_QUAD_COPPER: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->eeprom_wol = 0; + else + adapter->quad_port_a = 1; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + adapter->wol = adapter->eeprom_wol; /* print bus type/speed/width info */ { @@ -964,16 +979,33 @@ e1000_probe(struct pci_dev *pdev, return 0; err_register: + e1000_release_hw_control(adapter); +err_eeprom: + if (!e1000_check_phy_reset_block(&adapter->hw)) + e1000_phy_hw_reset(&adapter->hw); + if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); err_flashmap: +#ifdef CONFIG_E1000_NAPI + for (i = 0; i < adapter->num_rx_queues; i++) + dev_put(&adapter->polling_netdev[i]); +#endif + + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +#ifdef CONFIG_E1000_NAPI + kfree(adapter->polling_netdev); +#endif err_sw_init: -err_eeprom: iounmap(adapter->hw.hw_addr); err_ioremap: free_netdev(netdev); err_alloc_etherdev: pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); return err; } @@ -1208,7 +1240,7 @@ e1000_open(struct net_device *netdev) err = e1000_request_irq(adapter); if (err) - goto err_up; + goto err_req_irq; e1000_power_up_phy(adapter); @@ -1229,6 +1261,9 @@ e1000_open(struct net_device *netdev) return E1000_SUCCESS; err_up: + e1000_power_down_phy(adapter); + e1000_free_irq(adapter); +err_req_irq: e1000_free_all_rx_resources(adapter); err_setup_rx: e1000_free_all_tx_resources(adapter); @@ -1381,10 +1416,6 @@ setup_tx_desc_die: * (Descriptors) for all queues * @adapter: board private structure * - * If this function returns with an error, then it's possible one or - * more of the rings is populated (while the rest are not). It is the - * callers duty to clean those orphaned rings. - * * Return 0 on success, negative on failure **/ @@ -1398,6 +1429,9 @@ e1000_setup_all_tx_resources(struct e1000_adapter *adapter) if (err) { DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i); + for (i-- ; i >= 0; i--) + e1000_free_tx_resources(adapter, + &adapter->tx_ring[i]); break; } } @@ -1499,8 +1533,6 @@ e1000_configure_tx(struct e1000_adapter *adapter) } else if (hw->mac_type == e1000_80003es2lan) { tarc = E1000_READ_REG(hw, TARC0); tarc |= 1; - if (hw->media_type == e1000_media_type_internal_serdes) - tarc |= (1 << 20); E1000_WRITE_REG(hw, TARC0, tarc); tarc = E1000_READ_REG(hw, TARC1); tarc |= 1; @@ -1639,10 +1671,6 @@ setup_rx_desc_die: * (Descriptors) for all queues * @adapter: board private structure * - * If this function returns with an error, then it's possible one or - * more of the rings is populated (while the rest are not). It is the - * callers duty to clean those orphaned rings. - * * Return 0 on success, negative on failure **/ @@ -1656,6 +1684,9 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter) if (err) { DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i); + for (i-- ; i >= 0; i--) + e1000_free_rx_resources(adapter, + &adapter->rx_ring[i]); break; } } @@ -2442,10 +2473,9 @@ e1000_watchdog(unsigned long data) * disable receives in the ISR and * reset device here in the watchdog */ - if (adapter->hw.mac_type == e1000_80003es2lan) { + if (adapter->hw.mac_type == e1000_80003es2lan) /* reset device */ schedule_work(&adapter->reset_task); - } } e1000_smartspeed(adapter); @@ -2545,7 +2575,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, cmd_length = E1000_TXD_CMD_IP; ipcse = skb->h.raw - skb->data - 1; #ifdef NETIF_F_TSO_IPV6 - } else if (skb->protocol == ntohs(ETH_P_IPV6)) { + } else if (skb->protocol == htons(ETH_P_IPV6)) { skb->nh.ipv6h->payload_len = 0; skb->h.th->check = ~csum_ipv6_magic(&skb->nh.ipv6h->saddr, @@ -3680,7 +3710,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); /* recycle */ - buffer_info-> skb = skb; + buffer_info->skb = skb; goto next_desc; } @@ -3711,7 +3741,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, netdev_alloc_skb(netdev, length + NET_IP_ALIGN); if (new_skb) { skb_reserve(new_skb, NET_IP_ALIGN); - new_skb->dev = netdev; memcpy(new_skb->data - NET_IP_ALIGN, skb->data - NET_IP_ALIGN, length + NET_IP_ALIGN); @@ -3978,13 +4007,13 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, buffer_info = &rx_ring->buffer_info[i]; while (cleaned_count--) { - if (!(skb = buffer_info->skb)) - skb = netdev_alloc_skb(netdev, bufsz); - else { + skb = buffer_info->skb; + if (skb) { skb_trim(skb, 0); goto map_skb; } + skb = netdev_alloc_skb(netdev, bufsz); if (unlikely(!skb)) { /* Better luck next round */ adapter->alloc_rx_buff_failed++; @@ -4009,10 +4038,10 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, dev_kfree_skb(skb); dev_kfree_skb(oldskb); break; /* while !buffer_info->skb */ - } else { - /* Use new allocation */ - dev_kfree_skb(oldskb); } + + /* Use new allocation */ + dev_kfree_skb(oldskb); } /* Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after @@ -4020,8 +4049,6 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, */ skb_reserve(skb, NET_IP_ALIGN); - skb->dev = netdev; - buffer_info->skb = skb; buffer_info->length = adapter->rx_buffer_len; map_skb: @@ -4135,8 +4162,6 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, */ skb_reserve(skb, NET_IP_ALIGN); - skb->dev = netdev; - buffer_info->skb = skb; buffer_info->length = adapter->rx_ps_bsize0; buffer_info->dma = pci_map_single(pdev, skb->data, @@ -4628,7 +4653,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) e1000_set_multi(netdev); /* turn on all-multi mode if wake on multicast is enabled */ - if (adapter->wol & E1000_WUFC_MC) { + if (wufc & E1000_WUFC_MC) { rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl |= E1000_RCTL_MPE; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); @@ -4700,11 +4725,14 @@ e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - uint32_t manc, ret_val; + uint32_t manc, err; pci_set_power_state(pdev, PCI_D0); e1000_pci_restore_state(adapter); - ret_val = pci_enable_device(pdev); + if ((err = pci_enable_device(pdev))) { + printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n"); + return err; + } pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 0ef413172c6..21284273897 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -324,7 +324,6 @@ e1000_check_options(struct e1000_adapter *adapter) DPRINTK(PROBE, NOTICE, "Warning: no configuration for board #%i\n", bd); DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); - bd = E1000_MAX_NIC; } { /* Transmit Descriptor Count */ @@ -342,9 +341,14 @@ e1000_check_options(struct e1000_adapter *adapter) opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD; - tx_ring->count = TxDescriptors[bd]; - e1000_validate_option(&tx_ring->count, &opt, adapter); - E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); + if (num_TxDescriptors > bd) { + tx_ring->count = TxDescriptors[bd]; + e1000_validate_option(&tx_ring->count, &opt, adapter); + E1000_ROUNDUP(tx_ring->count, + REQ_TX_DESCRIPTOR_MULTIPLE); + } else { + tx_ring->count = opt.def; + } for (i = 0; i < adapter->num_tx_queues; i++) tx_ring[i].count = tx_ring->count; } @@ -363,9 +367,14 @@ e1000_check_options(struct e1000_adapter *adapter) opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD; - rx_ring->count = RxDescriptors[bd]; - e1000_validate_option(&rx_ring->count, &opt, adapter); - E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); + if (num_RxDescriptors > bd) { + rx_ring->count = RxDescriptors[bd]; + e1000_validate_option(&rx_ring->count, &opt, adapter); + E1000_ROUNDUP(rx_ring->count, + REQ_RX_DESCRIPTOR_MULTIPLE); + } else { + rx_ring->count = opt.def; + } for (i = 0; i < adapter->num_rx_queues; i++) rx_ring[i].count = rx_ring->count; } @@ -377,9 +386,13 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_ENABLED }; - int rx_csum = XsumRX[bd]; - e1000_validate_option(&rx_csum, &opt, adapter); - adapter->rx_csum = rx_csum; + if (num_XsumRX > bd) { + int rx_csum = XsumRX[bd]; + e1000_validate_option(&rx_csum, &opt, adapter); + adapter->rx_csum = rx_csum; + } else { + adapter->rx_csum = opt.def; + } } { /* Flow Control */ @@ -399,9 +412,13 @@ e1000_check_options(struct e1000_adapter *adapter) .p = fc_list }} }; - int fc = FlowControl[bd]; - e1000_validate_option(&fc, &opt, adapter); - adapter->hw.fc = adapter->hw.original_fc = fc; + if (num_FlowControl > bd) { + int fc = FlowControl[bd]; + e1000_validate_option(&fc, &opt, adapter); + adapter->hw.fc = adapter->hw.original_fc = fc; + } else { + adapter->hw.fc = adapter->hw.original_fc = opt.def; + } } { /* Transmit Interrupt Delay */ struct e1000_option opt = { @@ -413,8 +430,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_TXDELAY }} }; - adapter->tx_int_delay = TxIntDelay[bd]; - e1000_validate_option(&adapter->tx_int_delay, &opt, adapter); + if (num_TxIntDelay > bd) { + adapter->tx_int_delay = TxIntDelay[bd]; + e1000_validate_option(&adapter->tx_int_delay, &opt, + adapter); + } else { + adapter->tx_int_delay = opt.def; + } } { /* Transmit Absolute Interrupt Delay */ struct e1000_option opt = { @@ -426,9 +448,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_TXABSDELAY }} }; - adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; - e1000_validate_option(&adapter->tx_abs_int_delay, &opt, - adapter); + if (num_TxAbsIntDelay > bd) { + adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; + e1000_validate_option(&adapter->tx_abs_int_delay, &opt, + adapter); + } else { + adapter->tx_abs_int_delay = opt.def; + } } { /* Receive Interrupt Delay */ struct e1000_option opt = { @@ -440,8 +466,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_RXDELAY }} }; - adapter->rx_int_delay = RxIntDelay[bd]; - e1000_validate_option(&adapter->rx_int_delay, &opt, adapter); + if (num_RxIntDelay > bd) { + adapter->rx_int_delay = RxIntDelay[bd]; + e1000_validate_option(&adapter->rx_int_delay, &opt, + adapter); + } else { + adapter->rx_int_delay = opt.def; + } } { /* Receive Absolute Interrupt Delay */ struct e1000_option opt = { @@ -453,9 +484,13 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_RXABSDELAY }} }; - adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; - e1000_validate_option(&adapter->rx_abs_int_delay, &opt, - adapter); + if (num_RxAbsIntDelay > bd) { + adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; + e1000_validate_option(&adapter->rx_abs_int_delay, &opt, + adapter); + } else { + adapter->rx_abs_int_delay = opt.def; + } } { /* Interrupt Throttling Rate */ struct e1000_option opt = { @@ -467,18 +502,24 @@ e1000_check_options(struct e1000_adapter *adapter) .max = MAX_ITR }} }; - adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - DPRINTK(PROBE, INFO, "%s turned off\n", opt.name); - break; - case 1: - DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); - break; - default: - e1000_validate_option(&adapter->itr, &opt, adapter); - break; + if (num_InterruptThrottleRate > bd) { + adapter->itr = InterruptThrottleRate[bd]; + switch (adapter->itr) { + case 0: + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + break; + case 1: + DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", + opt.name); + break; + default: + e1000_validate_option(&adapter->itr, &opt, + adapter); + break; + } + } else { + adapter->itr = opt.def; } } { /* Smart Power Down */ @@ -489,9 +530,13 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_DISABLED }; - int spd = SmartPowerDownEnable[bd]; - e1000_validate_option(&spd, &opt, adapter); - adapter->smart_power_down = spd; + if (num_SmartPowerDownEnable > bd) { + int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); + adapter->smart_power_down = spd; + } else { + adapter->smart_power_down = opt.def; + } } { /* Kumeran Lock Loss Workaround */ struct e1000_option opt = { @@ -501,9 +546,13 @@ e1000_check_options(struct e1000_adapter *adapter) .def = OPTION_ENABLED }; + if (num_KumeranLockLoss > bd) { int kmrn_lock_loss = KumeranLockLoss[bd]; e1000_validate_option(&kmrn_lock_loss, &opt, adapter); adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; + } else { + adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def; + } } switch (adapter->hw.media_type) { @@ -530,18 +579,17 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter) { int bd = adapter->bd_number; - bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; - if ((Speed[bd] != OPTION_UNSET)) { + if (num_Speed > bd) { DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, " "parameter ignored\n"); } - if ((Duplex[bd] != OPTION_UNSET)) { + if (num_Duplex > bd) { DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, " "parameter ignored\n"); } - if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) { + if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) { DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is " "not valid for fiber adapters, " "parameter ignored\n"); @@ -560,7 +608,6 @@ e1000_check_copper_options(struct e1000_adapter *adapter) { int speed, dplx, an; int bd = adapter->bd_number; - bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; { /* Speed */ struct e1000_opt_list speed_list[] = {{ 0, "" }, @@ -577,8 +624,12 @@ e1000_check_copper_options(struct e1000_adapter *adapter) .p = speed_list }} }; - speed = Speed[bd]; - e1000_validate_option(&speed, &opt, adapter); + if (num_Speed > bd) { + speed = Speed[bd]; + e1000_validate_option(&speed, &opt, adapter); + } else { + speed = opt.def; + } } { /* Duplex */ struct e1000_opt_list dplx_list[] = {{ 0, "" }, @@ -600,11 +651,15 @@ e1000_check_copper_options(struct e1000_adapter *adapter) "Speed/Duplex/AutoNeg parameter ignored.\n"); return; } - dplx = Duplex[bd]; - e1000_validate_option(&dplx, &opt, adapter); + if (num_Duplex > bd) { + dplx = Duplex[bd]; + e1000_validate_option(&dplx, &opt, adapter); + } else { + dplx = opt.def; + } } - if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) { + if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) { DPRINTK(PROBE, INFO, "AutoNeg specified along with Speed or Duplex, " "parameter ignored\n"); @@ -653,15 +708,19 @@ e1000_check_copper_options(struct e1000_adapter *adapter) .p = an_list }} }; - an = AutoNeg[bd]; - e1000_validate_option(&an, &opt, adapter); + if (num_AutoNeg > bd) { + an = AutoNeg[bd]; + e1000_validate_option(&an, &opt, adapter); + } else { + an = opt.def; + } adapter->hw.autoneg_advertised = an; } switch (speed + dplx) { case 0: adapter->hw.autoneg = adapter->fc_autoneg = 1; - if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET) + if ((num_Speed > bd) && (speed != 0 || dplx != 0)) DPRINTK(PROBE, INFO, "Speed and duplex autonegotiation enabled\n"); break; diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index e445988c92e..a3d515def10 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -2385,7 +2385,7 @@ static int __init eepro100_init_module(void) #ifdef MODULE printk(version); #endif - return pci_module_init(&eepro100_driver); + return pci_register_driver(&eepro100_driver); } static void __exit eepro100_cleanup_module(void) diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index a67650ccf08..25c4619d842 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -1604,7 +1604,7 @@ static int __init epic_init (void) version, version2, version3); #endif - return pci_module_init (&epic_driver); + return pci_register_driver(&epic_driver); } diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 567e27413cf..a2121faa610 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -1984,7 +1984,7 @@ static int __init fealnx_init(void) printk(version); #endif - return pci_module_init(&fealnx_driver); + return pci_register_driver(&fealnx_driver); } static void __exit fealnx_exit(void) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 11b8f1b43dd..59f9a515c07 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -109,6 +109,7 @@ * 0.54: 21 Mar 2006: Fix spin locks for multi irqs and cleanup. * 0.55: 22 Mar 2006: Add flow control (pause frame). * 0.56: 22 Mar 2006: Additional ethtool config and moduleparam support. + * 0.57: 14 May 2006: Mac address set in probe/remove and order corrections. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -120,7 +121,12 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.56" +#ifdef CONFIG_FORCEDETH_NAPI +#define DRIVERNAPI "-NAPI" +#else +#define DRIVERNAPI +#endif +#define FORCEDETH_VERSION "0.57" #define DRV_NAME "forcedeth" #include <linux/module.h> @@ -262,7 +268,8 @@ enum { NvRegRingSizes = 0x108, #define NVREG_RINGSZ_TXSHIFT 0 #define NVREG_RINGSZ_RXSHIFT 16 - NvRegUnknownTransmitterReg = 0x10c, + NvRegTransmitPoll = 0x10c, +#define NVREG_TRANSMITPOLL_MAC_ADDR_REV 0x00008000 NvRegLinkSpeed = 0x110, #define NVREG_LINKSPEED_FORCE 0x10000 #define NVREG_LINKSPEED_10 1000 @@ -381,21 +388,21 @@ enum { /* Big endian: should work, but is untested */ struct ring_desc { - u32 PacketBuffer; - u32 FlagLen; + __le32 buf; + __le32 flaglen; }; struct ring_desc_ex { - u32 PacketBufferHigh; - u32 PacketBufferLow; - u32 TxVlan; - u32 FlagLen; + __le32 bufhigh; + __le32 buflow; + __le32 txvlan; + __le32 flaglen; }; -typedef union _ring_type { +union ring_type { struct ring_desc* orig; struct ring_desc_ex* ex; -} ring_type; +}; #define FLAG_MASK_V1 0xffff0000 #define FLAG_MASK_V2 0xffffc000 @@ -536,6 +543,9 @@ typedef union _ring_type { #define PHYID1_OUI_SHFT 6 #define PHYID2_OUI_MASK 0xfc00 #define PHYID2_OUI_SHFT 10 +#define PHYID2_MODEL_MASK 0x03f0 +#define PHY_MODEL_MARVELL_E3016 0x220 +#define PHY_MARVELL_E3016_INITMASK 0x0300 #define PHY_INIT1 0x0f000 #define PHY_INIT2 0x0e00 #define PHY_INIT3 0x01000 @@ -653,8 +663,8 @@ static const struct nv_ethtool_str nv_etests_str[] = { }; struct register_test { - u32 reg; - u32 mask; + __le32 reg; + __le32 mask; }; static const struct register_test nv_registers_test[] = { @@ -694,6 +704,7 @@ struct fe_priv { int phyaddr; int wolenabled; unsigned int phy_oui; + unsigned int phy_model; u16 gigabit; int intr_test; @@ -707,13 +718,14 @@ struct fe_priv { u32 vlanctl_bits; u32 driver_data; u32 register_size; + int rx_csum; void __iomem *base; /* rx specific fields. * Locking: Within irq hander or disable_irq+spin_lock(&np->lock); */ - ring_type rx_ring; + union ring_type rx_ring; unsigned int cur_rx, refill_rx; struct sk_buff **rx_skbuff; dma_addr_t *rx_dma; @@ -733,7 +745,7 @@ struct fe_priv { /* * tx specific fields. */ - ring_type tx_ring; + union ring_type tx_ring; unsigned int next_tx, nic_tx; struct sk_buff **tx_skbuff; dma_addr_t *tx_dma; @@ -826,13 +838,13 @@ static inline void pci_push(u8 __iomem *base) static inline u32 nv_descr_getlength(struct ring_desc *prd, u32 v) { - return le32_to_cpu(prd->FlagLen) + return le32_to_cpu(prd->flaglen) & ((v == DESC_VER_1) ? LEN_MASK_V1 : LEN_MASK_V2); } static inline u32 nv_descr_getlength_ex(struct ring_desc_ex *prd, u32 v) { - return le32_to_cpu(prd->FlagLen) & LEN_MASK_V2; + return le32_to_cpu(prd->flaglen) & LEN_MASK_V2; } static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target, @@ -885,7 +897,7 @@ static void free_rings(struct net_device *dev) struct fe_priv *np = get_nvpriv(dev); if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - if(np->rx_ring.orig) + if (np->rx_ring.orig) pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (np->rx_ring_size + np->tx_ring_size), np->rx_ring.orig, np->ring_addr); } else { @@ -1020,14 +1032,13 @@ static int mii_rw(struct net_device *dev, int addr, int miireg, int value) return retval; } -static int phy_reset(struct net_device *dev) +static int phy_reset(struct net_device *dev, u32 bmcr_setup) { struct fe_priv *np = netdev_priv(dev); u32 miicontrol; unsigned int tries = 0; - miicontrol = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); - miicontrol |= BMCR_RESET; + miicontrol = BMCR_RESET | bmcr_setup; if (mii_rw(dev, np->phyaddr, MII_BMCR, miicontrol)) { return -1; } @@ -1052,6 +1063,16 @@ static int phy_init(struct net_device *dev) u8 __iomem *base = get_hwbase(dev); u32 phyinterface, phy_reserved, mii_status, mii_control, mii_control_1000,reg; + /* phy errata for E3016 phy */ + if (np->phy_model == PHY_MODEL_MARVELL_E3016) { + reg = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ); + reg &= ~PHY_MARVELL_E3016_INITMASK; + if (mii_rw(dev, np->phyaddr, MII_NCONFIG, reg)) { + printk(KERN_INFO "%s: phy write to errata reg failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } + /* set advertise register */ reg = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ); reg |= (ADVERTISE_10HALF|ADVERTISE_10FULL|ADVERTISE_100HALF|ADVERTISE_100FULL|ADVERTISE_PAUSE_ASYM|ADVERTISE_PAUSE_CAP); @@ -1082,8 +1103,13 @@ static int phy_init(struct net_device *dev) else np->gigabit = 0; - /* reset the phy */ - if (phy_reset(dev)) { + mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); + mii_control |= BMCR_ANENABLE; + + /* reset the phy + * (certain phys need bmcr to be setup with reset) + */ + if (phy_reset(dev, mii_control)) { printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); return PHY_ERROR; } @@ -1178,7 +1204,7 @@ static void nv_stop_tx(struct net_device *dev) KERN_INFO "nv_stop_tx: TransmitterStatus remained busy"); udelay(NV_TXSTOP_DELAY2); - writel(0, base + NvRegUnknownTransmitterReg); + writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll); } static void nv_txrx_reset(struct net_device *dev) @@ -1258,14 +1284,14 @@ static int nv_alloc_rx(struct net_device *dev) np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->end-skb->data, PCI_DMA_FROMDEVICE); if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]); + np->rx_ring.orig[nr].buf = cpu_to_le32(np->rx_dma[nr]); wmb(); - np->rx_ring.orig[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL); + np->rx_ring.orig[nr].flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL); } else { - np->rx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->rx_dma[nr]) >> 32; - np->rx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF; + np->rx_ring.ex[nr].bufhigh = cpu_to_le64(np->rx_dma[nr]) >> 32; + np->rx_ring.ex[nr].buflow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF; wmb(); - np->rx_ring.ex[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL); + np->rx_ring.ex[nr].flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL); } dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n", dev->name, refill_rx); @@ -1277,6 +1303,16 @@ static int nv_alloc_rx(struct net_device *dev) return 0; } +/* If rx bufs are exhausted called after 50ms to attempt to refresh */ +#ifdef CONFIG_FORCEDETH_NAPI +static void nv_do_rx_refill(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + + /* Just reschedule NAPI rx processing */ + netif_rx_schedule(dev); +} +#else static void nv_do_rx_refill(unsigned long data) { struct net_device *dev = (struct net_device *) data; @@ -1305,6 +1341,7 @@ static void nv_do_rx_refill(unsigned long data) enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector); } } +#endif static void nv_init_rx(struct net_device *dev) { @@ -1315,9 +1352,9 @@ static void nv_init_rx(struct net_device *dev) np->refill_rx = 0; for (i = 0; i < np->rx_ring_size; i++) if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->rx_ring.orig[i].FlagLen = 0; + np->rx_ring.orig[i].flaglen = 0; else - np->rx_ring.ex[i].FlagLen = 0; + np->rx_ring.ex[i].flaglen = 0; } static void nv_init_tx(struct net_device *dev) @@ -1328,9 +1365,9 @@ static void nv_init_tx(struct net_device *dev) np->next_tx = np->nic_tx = 0; for (i = 0; i < np->tx_ring_size; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->tx_ring.orig[i].FlagLen = 0; + np->tx_ring.orig[i].flaglen = 0; else - np->tx_ring.ex[i].FlagLen = 0; + np->tx_ring.ex[i].flaglen = 0; np->tx_skbuff[i] = NULL; np->tx_dma[i] = 0; } @@ -1373,9 +1410,9 @@ static void nv_drain_tx(struct net_device *dev) for (i = 0; i < np->tx_ring_size; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->tx_ring.orig[i].FlagLen = 0; + np->tx_ring.orig[i].flaglen = 0; else - np->tx_ring.ex[i].FlagLen = 0; + np->tx_ring.ex[i].flaglen = 0; if (nv_release_txskb(dev, i)) np->stats.tx_dropped++; } @@ -1387,9 +1424,9 @@ static void nv_drain_rx(struct net_device *dev) int i; for (i = 0; i < np->rx_ring_size; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->rx_ring.orig[i].FlagLen = 0; + np->rx_ring.orig[i].flaglen = 0; else - np->rx_ring.ex[i].FlagLen = 0; + np->rx_ring.ex[i].flaglen = 0; wmb(); if (np->rx_skbuff[i]) { pci_unmap_single(np->pci_dev, np->rx_dma[i], @@ -1450,17 +1487,17 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) np->tx_dma_len[nr] = bcnt; if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); - np->tx_ring.orig[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags); + np->tx_ring.orig[nr].buf = cpu_to_le32(np->tx_dma[nr]); + np->tx_ring.orig[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags); } else { - np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; - np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; - np->tx_ring.ex[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags); + np->tx_ring.ex[nr].bufhigh = cpu_to_le64(np->tx_dma[nr]) >> 32; + np->tx_ring.ex[nr].buflow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; + np->tx_ring.ex[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags); } tx_flags = np->tx_flags; offset += bcnt; size -= bcnt; - } while(size); + } while (size); /* setup the fragments */ for (i = 0; i < fragments; i++) { @@ -1477,12 +1514,12 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) np->tx_dma_len[nr] = bcnt; if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); - np->tx_ring.orig[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags); + np->tx_ring.orig[nr].buf = cpu_to_le32(np->tx_dma[nr]); + np->tx_ring.orig[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags); } else { - np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; - np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; - np->tx_ring.ex[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags); + np->tx_ring.ex[nr].bufhigh = cpu_to_le64(np->tx_dma[nr]) >> 32; + np->tx_ring.ex[nr].buflow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; + np->tx_ring.ex[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags); } offset += bcnt; size -= bcnt; @@ -1491,9 +1528,9 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) /* set last fragment flag */ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - np->tx_ring.orig[nr].FlagLen |= cpu_to_le32(tx_flags_extra); + np->tx_ring.orig[nr].flaglen |= cpu_to_le32(tx_flags_extra); } else { - np->tx_ring.ex[nr].FlagLen |= cpu_to_le32(tx_flags_extra); + np->tx_ring.ex[nr].flaglen |= cpu_to_le32(tx_flags_extra); } np->tx_skbuff[nr] = skb; @@ -1512,10 +1549,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) /* set tx flags */ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - np->tx_ring.orig[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra); + np->tx_ring.orig[start_nr].flaglen |= cpu_to_le32(tx_flags | tx_flags_extra); } else { - np->tx_ring.ex[start_nr].TxVlan = cpu_to_le32(tx_flags_vlan); - np->tx_ring.ex[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra); + np->tx_ring.ex[start_nr].txvlan = cpu_to_le32(tx_flags_vlan); + np->tx_ring.ex[start_nr].flaglen |= cpu_to_le32(tx_flags | tx_flags_extra); } dprintk(KERN_DEBUG "%s: nv_start_xmit: packet %d (entries %d) queued for transmission. tx_flags_extra: %x\n", @@ -1547,7 +1584,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) static void nv_tx_done(struct net_device *dev) { struct fe_priv *np = netdev_priv(dev); - u32 Flags; + u32 flags; unsigned int i; struct sk_buff *skb; @@ -1555,22 +1592,22 @@ static void nv_tx_done(struct net_device *dev) i = np->nic_tx % np->tx_ring_size; if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - Flags = le32_to_cpu(np->tx_ring.orig[i].FlagLen); + flags = le32_to_cpu(np->tx_ring.orig[i].flaglen); else - Flags = le32_to_cpu(np->tx_ring.ex[i].FlagLen); + flags = le32_to_cpu(np->tx_ring.ex[i].flaglen); - dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, Flags 0x%x.\n", - dev->name, np->nic_tx, Flags); - if (Flags & NV_TX_VALID) + dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, flags 0x%x.\n", + dev->name, np->nic_tx, flags); + if (flags & NV_TX_VALID) break; if (np->desc_ver == DESC_VER_1) { - if (Flags & NV_TX_LASTPACKET) { + if (flags & NV_TX_LASTPACKET) { skb = np->tx_skbuff[i]; - if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION| + if (flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION| NV_TX_UNDERFLOW|NV_TX_ERROR)) { - if (Flags & NV_TX_UNDERFLOW) + if (flags & NV_TX_UNDERFLOW) np->stats.tx_fifo_errors++; - if (Flags & NV_TX_CARRIERLOST) + if (flags & NV_TX_CARRIERLOST) np->stats.tx_carrier_errors++; np->stats.tx_errors++; } else { @@ -1579,13 +1616,13 @@ static void nv_tx_done(struct net_device *dev) } } } else { - if (Flags & NV_TX2_LASTPACKET) { + if (flags & NV_TX2_LASTPACKET) { skb = np->tx_skbuff[i]; - if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION| + if (flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION| NV_TX2_UNDERFLOW|NV_TX2_ERROR)) { - if (Flags & NV_TX2_UNDERFLOW) + if (flags & NV_TX2_UNDERFLOW) np->stats.tx_fifo_errors++; - if (Flags & NV_TX2_CARRIERLOST) + if (flags & NV_TX2_CARRIERLOST) np->stats.tx_carrier_errors++; np->stats.tx_errors++; } else { @@ -1638,29 +1675,29 @@ static void nv_tx_timeout(struct net_device *dev) if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n", i, - le32_to_cpu(np->tx_ring.orig[i].PacketBuffer), - le32_to_cpu(np->tx_ring.orig[i].FlagLen), - le32_to_cpu(np->tx_ring.orig[i+1].PacketBuffer), - le32_to_cpu(np->tx_ring.orig[i+1].FlagLen), - le32_to_cpu(np->tx_ring.orig[i+2].PacketBuffer), - le32_to_cpu(np->tx_ring.orig[i+2].FlagLen), - le32_to_cpu(np->tx_ring.orig[i+3].PacketBuffer), - le32_to_cpu(np->tx_ring.orig[i+3].FlagLen)); + le32_to_cpu(np->tx_ring.orig[i].buf), + le32_to_cpu(np->tx_ring.orig[i].flaglen), + le32_to_cpu(np->tx_ring.orig[i+1].buf), + le32_to_cpu(np->tx_ring.orig[i+1].flaglen), + le32_to_cpu(np->tx_ring.orig[i+2].buf), + le32_to_cpu(np->tx_ring.orig[i+2].flaglen), + le32_to_cpu(np->tx_ring.orig[i+3].buf), + le32_to_cpu(np->tx_ring.orig[i+3].flaglen)); } else { printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n", i, - le32_to_cpu(np->tx_ring.ex[i].PacketBufferHigh), - le32_to_cpu(np->tx_ring.ex[i].PacketBufferLow), - le32_to_cpu(np->tx_ring.ex[i].FlagLen), - le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferHigh), - le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferLow), - le32_to_cpu(np->tx_ring.ex[i+1].FlagLen), - le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferHigh), - le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferLow), - le32_to_cpu(np->tx_ring.ex[i+2].FlagLen), - le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferHigh), - le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferLow), - le32_to_cpu(np->tx_ring.ex[i+3].FlagLen)); + le32_to_cpu(np->tx_ring.ex[i].bufhigh), + le32_to_cpu(np->tx_ring.ex[i].buflow), + le32_to_cpu(np->tx_ring.ex[i].flaglen), + le32_to_cpu(np->tx_ring.ex[i+1].bufhigh), + le32_to_cpu(np->tx_ring.ex[i+1].buflow), + le32_to_cpu(np->tx_ring.ex[i+1].flaglen), + le32_to_cpu(np->tx_ring.ex[i+2].bufhigh), + le32_to_cpu(np->tx_ring.ex[i+2].buflow), + le32_to_cpu(np->tx_ring.ex[i+2].flaglen), + le32_to_cpu(np->tx_ring.ex[i+3].bufhigh), + le32_to_cpu(np->tx_ring.ex[i+3].buflow), + le32_to_cpu(np->tx_ring.ex[i+3].flaglen)); } } } @@ -1697,7 +1734,7 @@ static int nv_getlen(struct net_device *dev, void *packet, int datalen) int protolen; /* length as stored in the proto field */ /* 1) calculate len according to header */ - if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == __constant_htons(ETH_P_8021Q)) { + if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == htons(ETH_P_8021Q)) { protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto ); hdrlen = VLAN_HLEN; } else { @@ -1740,13 +1777,14 @@ static int nv_getlen(struct net_device *dev, void *packet, int datalen) } } -static void nv_rx_process(struct net_device *dev) +static int nv_rx_process(struct net_device *dev, int limit) { struct fe_priv *np = netdev_priv(dev); - u32 Flags; + u32 flags; u32 vlanflags = 0; + int count; - for (;;) { + for (count = 0; count < limit; ++count) { struct sk_buff *skb; int len; int i; @@ -1755,18 +1793,18 @@ static void nv_rx_process(struct net_device *dev) i = np->cur_rx % np->rx_ring_size; if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - Flags = le32_to_cpu(np->rx_ring.orig[i].FlagLen); + flags = le32_to_cpu(np->rx_ring.orig[i].flaglen); len = nv_descr_getlength(&np->rx_ring.orig[i], np->desc_ver); } else { - Flags = le32_to_cpu(np->rx_ring.ex[i].FlagLen); + flags = le32_to_cpu(np->rx_ring.ex[i].flaglen); len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver); - vlanflags = le32_to_cpu(np->rx_ring.ex[i].PacketBufferLow); + vlanflags = le32_to_cpu(np->rx_ring.ex[i].buflow); } - dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, Flags 0x%x.\n", - dev->name, np->cur_rx, Flags); + dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, flags 0x%x.\n", + dev->name, np->cur_rx, flags); - if (Flags & NV_RX_AVAIL) + if (flags & NV_RX_AVAIL) break; /* still owned by hardware, */ /* @@ -1780,7 +1818,7 @@ static void nv_rx_process(struct net_device *dev) { int j; - dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",Flags); + dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",flags); for (j=0; j<64; j++) { if ((j%16) == 0) dprintk("\n%03x:", j); @@ -1790,30 +1828,30 @@ static void nv_rx_process(struct net_device *dev) } /* look at what we actually got: */ if (np->desc_ver == DESC_VER_1) { - if (!(Flags & NV_RX_DESCRIPTORVALID)) + if (!(flags & NV_RX_DESCRIPTORVALID)) goto next_pkt; - if (Flags & NV_RX_ERROR) { - if (Flags & NV_RX_MISSEDFRAME) { + if (flags & NV_RX_ERROR) { + if (flags & NV_RX_MISSEDFRAME) { np->stats.rx_missed_errors++; np->stats.rx_errors++; goto next_pkt; } - if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) { + if (flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX_CRCERR) { + if (flags & NV_RX_CRCERR) { np->stats.rx_crc_errors++; np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX_OVERFLOW) { + if (flags & NV_RX_OVERFLOW) { np->stats.rx_over_errors++; np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX_ERROR4) { + if (flags & NV_RX_ERROR4) { len = nv_getlen(dev, np->rx_skbuff[i]->data, len); if (len < 0) { np->stats.rx_errors++; @@ -1821,32 +1859,32 @@ static void nv_rx_process(struct net_device *dev) } } /* framing errors are soft errors. */ - if (Flags & NV_RX_FRAMINGERR) { - if (Flags & NV_RX_SUBSTRACT1) { + if (flags & NV_RX_FRAMINGERR) { + if (flags & NV_RX_SUBSTRACT1) { len--; } } } } else { - if (!(Flags & NV_RX2_DESCRIPTORVALID)) + if (!(flags & NV_RX2_DESCRIPTORVALID)) goto next_pkt; - if (Flags & NV_RX2_ERROR) { - if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) { + if (flags & NV_RX2_ERROR) { + if (flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX2_CRCERR) { + if (flags & NV_RX2_CRCERR) { np->stats.rx_crc_errors++; np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX2_OVERFLOW) { + if (flags & NV_RX2_OVERFLOW) { np->stats.rx_over_errors++; np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX2_ERROR4) { + if (flags & NV_RX2_ERROR4) { len = nv_getlen(dev, np->rx_skbuff[i]->data, len); if (len < 0) { np->stats.rx_errors++; @@ -1854,17 +1892,17 @@ static void nv_rx_process(struct net_device *dev) } } /* framing errors are soft errors */ - if (Flags & NV_RX2_FRAMINGERR) { - if (Flags & NV_RX2_SUBSTRACT1) { + if (flags & NV_RX2_FRAMINGERR) { + if (flags & NV_RX2_SUBSTRACT1) { len--; } } } - if (np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) { - Flags &= NV_RX2_CHECKSUMMASK; - if (Flags == NV_RX2_CHECKSUMOK1 || - Flags == NV_RX2_CHECKSUMOK2 || - Flags == NV_RX2_CHECKSUMOK3) { + if (np->rx_csum) { + flags &= NV_RX2_CHECKSUMMASK; + if (flags == NV_RX2_CHECKSUMOK1 || + flags == NV_RX2_CHECKSUMOK2 || + flags == NV_RX2_CHECKSUMOK3) { dprintk(KERN_DEBUG "%s: hw checksum hit!.\n", dev->name); np->rx_skbuff[i]->ip_summed = CHECKSUM_UNNECESSARY; } else { @@ -1880,17 +1918,27 @@ static void nv_rx_process(struct net_device *dev) skb->protocol = eth_type_trans(skb, dev); dprintk(KERN_DEBUG "%s: nv_rx_process: packet %d with %d bytes, proto %d accepted.\n", dev->name, np->cur_rx, len, skb->protocol); - if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT)) { - vlan_hwaccel_rx(skb, np->vlangrp, vlanflags & NV_RX3_VLAN_TAG_MASK); - } else { +#ifdef CONFIG_FORCEDETH_NAPI + if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT)) + vlan_hwaccel_receive_skb(skb, np->vlangrp, + vlanflags & NV_RX3_VLAN_TAG_MASK); + else + netif_receive_skb(skb); +#else + if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT)) + vlan_hwaccel_rx(skb, np->vlangrp, + vlanflags & NV_RX3_VLAN_TAG_MASK); + else netif_rx(skb); - } +#endif dev->last_rx = jiffies; np->stats.rx_packets++; np->stats.rx_bytes += len; next_pkt: np->cur_rx++; } + + return count; } static void set_bufsize(struct net_device *dev) @@ -1990,7 +2038,7 @@ static int nv_set_mac_address(struct net_device *dev, void *addr) struct fe_priv *np = netdev_priv(dev); struct sockaddr *macaddr = (struct sockaddr*)addr; - if(!is_valid_ether_addr(macaddr->sa_data)) + if (!is_valid_ether_addr(macaddr->sa_data)) return -EADDRNOTAVAIL; /* synchronized against open : rtnl_lock() held by caller */ @@ -2032,7 +2080,6 @@ static void nv_set_multicast(struct net_device *dev) memset(mask, 0, sizeof(mask)); if (dev->flags & IFF_PROMISC) { - printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); pff |= NVREG_PFF_PROMISC; } else { pff |= NVREG_PFF_MYADDR; @@ -2283,20 +2330,20 @@ set_speed: lpa_pause = lpa & (LPA_PAUSE_CAP| LPA_PAUSE_ASYM); switch (adv_pause) { - case (ADVERTISE_PAUSE_CAP): + case ADVERTISE_PAUSE_CAP: if (lpa_pause & LPA_PAUSE_CAP) { pause_flags |= NV_PAUSEFRAME_RX_ENABLE; if (np->pause_flags & NV_PAUSEFRAME_TX_REQ) pause_flags |= NV_PAUSEFRAME_TX_ENABLE; } break; - case (ADVERTISE_PAUSE_ASYM): + case ADVERTISE_PAUSE_ASYM: if (lpa_pause == (LPA_PAUSE_CAP| LPA_PAUSE_ASYM)) { pause_flags |= NV_PAUSEFRAME_TX_ENABLE; } break; - case (ADVERTISE_PAUSE_CAP| ADVERTISE_PAUSE_ASYM): + case ADVERTISE_PAUSE_CAP| ADVERTISE_PAUSE_ASYM: if (lpa_pause & LPA_PAUSE_CAP) { pause_flags |= NV_PAUSEFRAME_RX_ENABLE; @@ -2376,14 +2423,6 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) nv_tx_done(dev); spin_unlock(&np->lock); - nv_rx_process(dev); - if (nv_alloc_rx(dev)) { - spin_lock(&np->lock); - if (!np->in_shutdown) - mod_timer(&np->oom_kick, jiffies + OOM_REFILL); - spin_unlock(&np->lock); - } - if (events & NVREG_IRQ_LINK) { spin_lock(&np->lock); nv_link_irq(dev); @@ -2403,6 +2442,29 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n", dev->name, events); } +#ifdef CONFIG_FORCEDETH_NAPI + if (events & NVREG_IRQ_RX_ALL) { + netif_rx_schedule(dev); + + /* Disable furthur receive irq's */ + spin_lock(&np->lock); + np->irqmask &= ~NVREG_IRQ_RX_ALL; + + if (np->msi_flags & NV_MSI_X_ENABLED) + writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask); + else + writel(np->irqmask, base + NvRegIrqMask); + spin_unlock(&np->lock); + } +#else + nv_rx_process(dev, dev->weight); + if (nv_alloc_rx(dev)) { + spin_lock(&np->lock); + if (!np->in_shutdown) + mod_timer(&np->oom_kick, jiffies + OOM_REFILL); + spin_unlock(&np->lock); + } +#endif if (i > max_interrupt_work) { spin_lock(&np->lock); /* disable interrupts on the nic */ @@ -2474,6 +2536,63 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs) return IRQ_RETVAL(i); } +#ifdef CONFIG_FORCEDETH_NAPI +static int nv_napi_poll(struct net_device *dev, int *budget) +{ + int pkts, limit = min(*budget, dev->quota); + struct fe_priv *np = netdev_priv(dev); + u8 __iomem *base = get_hwbase(dev); + + pkts = nv_rx_process(dev, limit); + + if (nv_alloc_rx(dev)) { + spin_lock_irq(&np->lock); + if (!np->in_shutdown) + mod_timer(&np->oom_kick, jiffies + OOM_REFILL); + spin_unlock_irq(&np->lock); + } + + if (pkts < limit) { + /* all done, no more packets present */ + netif_rx_complete(dev); + + /* re-enable receive interrupts */ + spin_lock_irq(&np->lock); + np->irqmask |= NVREG_IRQ_RX_ALL; + if (np->msi_flags & NV_MSI_X_ENABLED) + writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask); + else + writel(np->irqmask, base + NvRegIrqMask); + spin_unlock_irq(&np->lock); + return 0; + } else { + /* used up our quantum, so reschedule */ + dev->quota -= pkts; + *budget -= pkts; + return 1; + } +} +#endif + +#ifdef CONFIG_FORCEDETH_NAPI +static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) data; + u8 __iomem *base = get_hwbase(dev); + u32 events; + + events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL; + writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus); + + if (events) { + netif_rx_schedule(dev); + /* disable receive interrupts on the nic */ + writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask); + pci_push(base); + } + return IRQ_HANDLED; +} +#else static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) data; @@ -2492,7 +2611,7 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs) if (!(events & np->irqmask)) break; - nv_rx_process(dev); + nv_rx_process(dev, dev->weight); if (nv_alloc_rx(dev)) { spin_lock_irq(&np->lock); if (!np->in_shutdown) @@ -2514,12 +2633,12 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs) spin_unlock_irq(&np->lock); break; } - } dprintk(KERN_DEBUG "%s: nv_nic_irq_rx completed\n", dev->name); return IRQ_RETVAL(i); } +#endif static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs) { @@ -3057,9 +3176,18 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) if (netif_running(dev)) printk(KERN_INFO "%s: link down.\n", dev->name); bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); - bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); - mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); - + if (np->phy_model == PHY_MODEL_MARVELL_E3016) { + bmcr |= BMCR_ANENABLE; + /* reset the phy in order for settings to stick, + * and cause autoneg to start */ + if (phy_reset(dev, bmcr)) { + printk(KERN_INFO "%s: phy reset failed\n", dev->name); + return -EINVAL; + } + } else { + bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); + mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); + } } else { int adv, bmcr; @@ -3099,17 +3227,19 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) bmcr |= BMCR_FULLDPLX; if (np->fixed_mode & (ADVERTISE_100HALF|ADVERTISE_100FULL)) bmcr |= BMCR_SPEED100; - mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); if (np->phy_oui == PHY_OUI_MARVELL) { - /* reset the phy */ - if (phy_reset(dev)) { + /* reset the phy in order for forced mode settings to stick */ + if (phy_reset(dev, bmcr)) { printk(KERN_INFO "%s: phy reset failed\n", dev->name); return -EINVAL; } - } else if (netif_running(dev)) { - /* Wait a bit and then reconfigure the nic. */ - udelay(10); - nv_linkchange(dev); + } else { + mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); + if (netif_running(dev)) { + /* Wait a bit and then reconfigure the nic. */ + udelay(10); + nv_linkchange(dev); + } } } @@ -3166,8 +3296,17 @@ static int nv_nway_reset(struct net_device *dev) } bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); - bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); - mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); + if (np->phy_model == PHY_MODEL_MARVELL_E3016) { + bmcr |= BMCR_ANENABLE; + /* reset the phy in order for settings to stick*/ + if (phy_reset(dev, bmcr)) { + printk(KERN_INFO "%s: phy reset failed\n", dev->name); + return -EINVAL; + } + } else { + bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); + mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); + } if (netif_running(dev)) { nv_start_rx(dev); @@ -3245,7 +3384,7 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri if (!rxtx_ring || !rx_skbuff || !rx_dma || !tx_skbuff || !tx_dma || !tx_dma_len) { /* fall back to old rings */ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - if(rxtx_ring) + if (rxtx_ring) pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (ring->rx_pending + ring->tx_pending), rxtx_ring, ring_addr); } else { @@ -3418,7 +3557,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam* static u32 nv_get_rx_csum(struct net_device *dev) { struct fe_priv *np = netdev_priv(dev); - return (np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) != 0; + return (np->rx_csum) != 0; } static int nv_set_rx_csum(struct net_device *dev, u32 data) @@ -3428,22 +3567,15 @@ static int nv_set_rx_csum(struct net_device *dev, u32 data) int retcode = 0; if (np->driver_data & DEV_HAS_CHECKSUM) { - - if (((np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) && data) || - (!(np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) && !data)) { - /* already set or unset */ - return 0; - } - if (data) { + np->rx_csum = 1; np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; - } else if (!(np->vlanctl_bits & NVREG_VLANCONTROL_ENABLE)) { - np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK; } else { - printk(KERN_INFO "Can not disable rx checksum if vlan is enabled\n"); - return -EINVAL; + np->rx_csum = 0; + /* vlan is dependent on rx checksum offload */ + if (!(np->vlanctl_bits & NVREG_VLANCONTROL_ENABLE)) + np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK; } - if (netif_running(dev)) { spin_lock_irq(&np->lock); writel(np->txrxctl_bits, base + NvRegTxRxControl); @@ -3481,7 +3613,7 @@ static int nv_get_stats_count(struct net_device *dev) struct fe_priv *np = netdev_priv(dev); if (np->driver_data & DEV_HAS_STATISTICS) - return (sizeof(struct nv_ethtool_stats)/sizeof(u64)); + return sizeof(struct nv_ethtool_stats)/sizeof(u64); else return 0; } @@ -3619,7 +3751,7 @@ static int nv_loopback_test(struct net_device *dev) struct sk_buff *tx_skb, *rx_skb; dma_addr_t test_dma_addr; u32 tx_flags_extra = (np->desc_ver == DESC_VER_1 ? NV_TX_LASTPACKET : NV_TX2_LASTPACKET); - u32 Flags; + u32 flags; int len, i, pkt_len; u8 *pkt_data; u32 filter_flags = 0; @@ -3663,12 +3795,12 @@ static int nv_loopback_test(struct net_device *dev) tx_skb->end-tx_skb->data, PCI_DMA_FROMDEVICE); if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - np->tx_ring.orig[0].PacketBuffer = cpu_to_le32(test_dma_addr); - np->tx_ring.orig[0].FlagLen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra); + np->tx_ring.orig[0].buf = cpu_to_le32(test_dma_addr); + np->tx_ring.orig[0].flaglen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra); } else { - np->tx_ring.ex[0].PacketBufferHigh = cpu_to_le64(test_dma_addr) >> 32; - np->tx_ring.ex[0].PacketBufferLow = cpu_to_le64(test_dma_addr) & 0x0FFFFFFFF; - np->tx_ring.ex[0].FlagLen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra); + np->tx_ring.ex[0].bufhigh = cpu_to_le64(test_dma_addr) >> 32; + np->tx_ring.ex[0].buflow = cpu_to_le64(test_dma_addr) & 0x0FFFFFFFF; + np->tx_ring.ex[0].flaglen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra); } writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(get_hwbase(dev)); @@ -3677,21 +3809,21 @@ static int nv_loopback_test(struct net_device *dev) /* check for rx of the packet */ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { - Flags = le32_to_cpu(np->rx_ring.orig[0].FlagLen); + flags = le32_to_cpu(np->rx_ring.orig[0].flaglen); len = nv_descr_getlength(&np->rx_ring.orig[0], np->desc_ver); } else { - Flags = le32_to_cpu(np->rx_ring.ex[0].FlagLen); + flags = le32_to_cpu(np->rx_ring.ex[0].flaglen); len = nv_descr_getlength_ex(&np->rx_ring.ex[0], np->desc_ver); } - if (Flags & NV_RX_AVAIL) { + if (flags & NV_RX_AVAIL) { ret = 0; } else if (np->desc_ver == DESC_VER_1) { - if (Flags & NV_RX_ERROR) + if (flags & NV_RX_ERROR) ret = 0; } else { - if (Flags & NV_RX2_ERROR) { + if (flags & NV_RX2_ERROR) { ret = 0; } } @@ -3753,6 +3885,7 @@ static void nv_self_test(struct net_device *dev, struct ethtool_test *test, u64 if (test->flags & ETH_TEST_FL_OFFLINE) { if (netif_running(dev)) { netif_stop_queue(dev); + netif_poll_disable(dev); netif_tx_lock_bh(dev); spin_lock_irq(&np->lock); nv_disable_hw_interrupts(dev, np->irqmask); @@ -3811,6 +3944,7 @@ static void nv_self_test(struct net_device *dev, struct ethtool_test *test, u64 nv_start_rx(dev); nv_start_tx(dev); netif_start_queue(dev); + netif_poll_enable(dev); nv_enable_hw_interrupts(dev, np->irqmask); } } @@ -3895,10 +4029,9 @@ static int nv_open(struct net_device *dev) dprintk(KERN_DEBUG "nv_open: begin\n"); - /* 1) erase previous misconfiguration */ + /* erase previous misconfiguration */ if (np->driver_data & DEV_HAS_POWER_CNTRL) nv_mac_reset(dev); - /* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */ writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA); writel(0, base + NvRegMulticastAddrB); writel(0, base + NvRegMulticastMaskA); @@ -3913,26 +4046,22 @@ static int nv_open(struct net_device *dev) if (np->pause_flags & NV_PAUSEFRAME_TX_CAPABLE) writel(NVREG_TX_PAUSEFRAME_DISABLE, base + NvRegTxPauseFrame); - /* 2) initialize descriptor rings */ + /* initialize descriptor rings */ set_bufsize(dev); oom = nv_init_ring(dev); writel(0, base + NvRegLinkSpeed); - writel(0, base + NvRegUnknownTransmitterReg); + writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll); nv_txrx_reset(dev); writel(0, base + NvRegUnknownSetupReg6); np->in_shutdown = 0; - /* 3) set mac address */ - nv_copy_mac_to_hw(dev); - - /* 4) give hw rings */ + /* give hw rings */ setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING); writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT), base + NvRegRingSizes); - /* 5) continue setup */ writel(np->linkspeed, base + NvRegLinkSpeed); if (np->desc_ver == DESC_VER_1) writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark); @@ -3950,7 +4079,6 @@ static int nv_open(struct net_device *dev) writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus); writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus); - /* 6) continue setup */ writel(NVREG_MISC1_FORCE | NVREG_MISC1_HD, base + NvRegMisc1); writel(readl(base + NvRegTransmitterStatus), base + NvRegTransmitterStatus); writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags); @@ -4020,6 +4148,8 @@ static int nv_open(struct net_device *dev) nv_start_rx(dev); nv_start_tx(dev); netif_start_queue(dev); + netif_poll_enable(dev); + if (ret) { netif_carrier_on(dev); } else { @@ -4049,6 +4179,7 @@ static int nv_close(struct net_device *dev) spin_lock_irq(&np->lock); np->in_shutdown = 1; spin_unlock_irq(&np->lock); + netif_poll_disable(dev); synchronize_irq(dev->irq); del_timer_sync(&np->oom_kick); @@ -4076,12 +4207,6 @@ static int nv_close(struct net_device *dev) if (np->wolenabled) nv_start_rx(dev); - /* special op: write back the misordered MAC address - otherwise - * the next nv_probe would see a wrong address. - */ - writel(np->orig_mac[0], base + NvRegMacAddrA); - writel(np->orig_mac[1], base + NvRegMacAddrB); - /* FIXME: power down nic */ return 0; @@ -4094,7 +4219,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i unsigned long addr; u8 __iomem *base; int err, i; - u32 powerstate; + u32 powerstate, txreg; dev = alloc_etherdev(sizeof(struct fe_priv)); err = -ENOMEM; @@ -4190,6 +4315,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->pkt_limit = NV_PKTLIMIT_2; if (id->driver_data & DEV_HAS_CHECKSUM) { + np->rx_csum = 1; np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG; #ifdef NETIF_F_TSO @@ -4270,6 +4396,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = nv_poll_controller; #endif + dev->weight = 64; +#ifdef CONFIG_FORCEDETH_NAPI + dev->poll = nv_napi_poll; +#endif SET_ETHTOOL_OPS(dev, &ops); dev->tx_timeout = nv_tx_timeout; dev->watchdog_timeo = NV_WATCHDOG_TIMEO; @@ -4281,12 +4411,30 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->orig_mac[0] = readl(base + NvRegMacAddrA); np->orig_mac[1] = readl(base + NvRegMacAddrB); - dev->dev_addr[0] = (np->orig_mac[1] >> 8) & 0xff; - dev->dev_addr[1] = (np->orig_mac[1] >> 0) & 0xff; - dev->dev_addr[2] = (np->orig_mac[0] >> 24) & 0xff; - dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff; - dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff; - dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff; + /* check the workaround bit for correct mac address order */ + txreg = readl(base + NvRegTransmitPoll); + if (txreg & NVREG_TRANSMITPOLL_MAC_ADDR_REV) { + /* mac address is already in correct order */ + dev->dev_addr[0] = (np->orig_mac[0] >> 0) & 0xff; + dev->dev_addr[1] = (np->orig_mac[0] >> 8) & 0xff; + dev->dev_addr[2] = (np->orig_mac[0] >> 16) & 0xff; + dev->dev_addr[3] = (np->orig_mac[0] >> 24) & 0xff; + dev->dev_addr[4] = (np->orig_mac[1] >> 0) & 0xff; + dev->dev_addr[5] = (np->orig_mac[1] >> 8) & 0xff; + } else { + /* need to reverse mac address to correct order */ + dev->dev_addr[0] = (np->orig_mac[1] >> 8) & 0xff; + dev->dev_addr[1] = (np->orig_mac[1] >> 0) & 0xff; + dev->dev_addr[2] = (np->orig_mac[0] >> 24) & 0xff; + dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff; + dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff; + dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff; + /* set permanent address to be correct aswell */ + np->orig_mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) + + (dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24); + np->orig_mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8); + writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll); + } memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); if (!is_valid_ether_addr(dev->perm_addr)) { @@ -4309,6 +4457,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); + /* set mac address */ + nv_copy_mac_to_hw(dev); + /* disable WOL */ writel(0, base + NvRegWakeUpFlags); np->wolenabled = 0; @@ -4369,6 +4520,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (id2 < 0 || id2 == 0xffff) continue; + np->phy_model = id2 & PHYID2_MODEL_MASK; id1 = (id1 & PHYID1_OUI_MASK) << PHYID1_OUI_SHFT; id2 = (id2 & PHYID2_OUI_MASK) >> PHYID2_OUI_SHFT; dprintk(KERN_DEBUG "%s: open: Found PHY %04x:%04x at address %d.\n", @@ -4421,9 +4573,17 @@ out: static void __devexit nv_remove(struct pci_dev *pci_dev) { struct net_device *dev = pci_get_drvdata(pci_dev); + struct fe_priv *np = netdev_priv(dev); + u8 __iomem *base = get_hwbase(dev); unregister_netdev(dev); + /* special op: write back the misordered MAC address - otherwise + * the next nv_probe would see a wrong address. + */ + writel(np->orig_mac[0], base + NvRegMacAddrA); + writel(np->orig_mac[1], base + NvRegMacAddrB); + /* free all structures */ free_rings(dev); iounmap(get_hwbase(dev)); @@ -4540,7 +4700,7 @@ static struct pci_driver driver = { static int __init init_nic(void) { printk(KERN_INFO "forcedeth.c: Reverse Engineered nForce ethernet driver. Version %s.\n", FORCEDETH_VERSION); - return pci_module_init(&driver); + return pci_register_driver(&driver); } static void __exit exit_nic(void) diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index e7d9bf33028..ff5a67d619b 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -111,7 +111,6 @@ #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/types.h> -#include <linux/config.h> /* for CONFIG_PCI */ #include <linux/delay.h> #include <linux/init.h> #include <linux/bitops.h> diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c index 47f6f64d604..415ba8dc94c 100644 --- a/drivers/net/irda/mcs7780.c +++ b/drivers/net/irda/mcs7780.c @@ -45,7 +45,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/config.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index 0ea65c4c6f8..b69776e0095 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -40,7 +40,6 @@ ********************************************************************/ #include <linux/module.h> -#include <linux/config.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/skbuff.h> diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 82b67af54c9..a51604b3651 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -110,9 +110,6 @@ struct ixgb_adapter; #define IXGB_RXBUFFER_8192 8192 #define IXGB_RXBUFFER_16384 16384 -/* How many Tx Descriptors do we need to call netif_wake_queue? */ -#define IXGB_TX_QUEUE_WAKE 16 - /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define IXGB_RX_BUFFER_WRITE 4 /* Must be power of 2 */ @@ -173,7 +170,7 @@ struct ixgb_adapter { unsigned long led_status; /* TX */ - struct ixgb_desc_ring tx_ring; + struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp; unsigned long timeo_start; uint32_t tx_cmd_type; uint64_t hw_csum_tx_good; diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index cf19b898ba9..ba621083830 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -654,11 +654,7 @@ ixgb_phys_id(struct net_device *netdev, uint32_t data) mod_timer(&adapter->blink_timer, jiffies); - if (data) - schedule_timeout_interruptible(data * HZ); - else - schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); - + msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); ixgb_led_off(&adapter->hw); clear_bit(IXGB_LED_ON, &adapter->led_status); diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c index f7fa10e47fa..2b1515574fa 100644 --- a/drivers/net/ixgb/ixgb_hw.c +++ b/drivers/net/ixgb/ixgb_hw.c @@ -236,6 +236,17 @@ ixgb_identify_phy(struct ixgb_hw *hw) DEBUGOUT("Identified G6104 optics\n"); phy_type = ixgb_phy_type_g6104; break; + case IXGB_DEVICE_ID_82597EX_CX4: + DEBUGOUT("Identified CX4\n"); + xpak_vendor = ixgb_identify_xpak_vendor(hw); + if (xpak_vendor == ixgb_xpak_vendor_intel) { + DEBUGOUT("Identified TXN17201 optics\n"); + phy_type = ixgb_phy_type_txn17201; + } else { + DEBUGOUT("Identified G6005 optics\n"); + phy_type = ixgb_phy_type_g6005; + } + break; default: DEBUGOUT("Unknown physical layer module\n"); phy_type = ixgb_phy_type_unknown; diff --git a/drivers/net/ixgb/ixgb_ids.h b/drivers/net/ixgb/ixgb_ids.h index 40a085f94c7..9fd61189b4b 100644 --- a/drivers/net/ixgb/ixgb_ids.h +++ b/drivers/net/ixgb/ixgb_ids.h @@ -45,6 +45,7 @@ #define IXGB_DEVICE_ID_82597EX_CX4 0x109E #define IXGB_SUBDEVICE_ID_A00C 0xA00C +#define IXGB_SUBDEVICE_ID_A01C 0xA01C #endif /* #ifndef _IXGB_IDS_H_ */ /* End of File */ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 7bbd447289b..e36dee1dd33 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -36,7 +36,7 @@ static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "1.0.109-k2"DRIVERNAPI +#define DRV_VERSION "1.0.112-k2"DRIVERNAPI char ixgb_driver_version[] = DRV_VERSION; static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -118,15 +118,26 @@ static void ixgb_restore_vlan(struct ixgb_adapter *adapter); static void ixgb_netpoll(struct net_device *dev); #endif -/* Exported from other modules */ +static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, + enum pci_channel_state state); +static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev); +static void ixgb_io_resume (struct pci_dev *pdev); +/* Exported from other modules */ extern void ixgb_check_options(struct ixgb_adapter *adapter); +static struct pci_error_handlers ixgb_err_handler = { + .error_detected = ixgb_io_error_detected, + .slot_reset = ixgb_io_slot_reset, + .resume = ixgb_io_resume, +}; + static struct pci_driver ixgb_driver = { .name = ixgb_driver_name, .id_table = ixgb_pci_tbl, .probe = ixgb_probe, .remove = __devexit_p(ixgb_remove), + .err_handler = &ixgb_err_handler }; MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); @@ -140,12 +151,12 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); /* some defines for controlling descriptor fetches in h/w */ -#define RXDCTL_WTHRESH_DEFAULT 16 /* chip writes back at this many or RXT0 */ -#define RXDCTL_PTHRESH_DEFAULT 0 /* chip considers prefech below - * this */ -#define RXDCTL_HTHRESH_DEFAULT 0 /* chip will only prefetch if tail - * is pushed this many descriptors - * from head */ +#define RXDCTL_WTHRESH_DEFAULT 15 /* chip writes back at this many or RXT0 */ +#define RXDCTL_PTHRESH_DEFAULT 0 /* chip considers prefech below + * this */ +#define RXDCTL_HTHRESH_DEFAULT 0 /* chip will only prefetch if tail + * is pushed this many descriptors + * from head */ /** * ixgb_init_module - Driver Registration Routine @@ -162,7 +173,7 @@ ixgb_init_module(void) printk(KERN_INFO "%s\n", ixgb_copyright); - return pci_module_init(&ixgb_driver); + return pci_register_driver(&ixgb_driver); } module_init(ixgb_init_module); @@ -1174,6 +1185,7 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) int err; if (likely(skb_is_gso(skb))) { + struct ixgb_buffer *buffer_info; if (skb_header_cloned(skb)) { err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); if (err) @@ -1196,6 +1208,8 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) i = adapter->tx_ring.next_to_use; context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); + buffer_info = &adapter->tx_ring.buffer_info[i]; + WARN_ON(buffer_info->dma != 0); context_desc->ipcss = ipcss; context_desc->ipcso = ipcso; @@ -1233,11 +1247,14 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) uint8_t css, cso; if(likely(skb->ip_summed == CHECKSUM_HW)) { + struct ixgb_buffer *buffer_info; css = skb->h.raw - skb->data; cso = (skb->h.raw + skb->csum) - skb->data; i = adapter->tx_ring.next_to_use; context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i); + buffer_info = &adapter->tx_ring.buffer_info[i]; + WARN_ON(buffer_info->dma != 0); context_desc->tucss = css; context_desc->tucso = cso; @@ -1283,6 +1300,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, buffer_info = &tx_ring->buffer_info[i]; size = min(len, IXGB_MAX_DATA_PER_TXD); buffer_info->length = size; + WARN_ON(buffer_info->dma != 0); buffer_info->dma = pci_map_single(adapter->pdev, skb->data + offset, @@ -1543,6 +1561,11 @@ void ixgb_update_stats(struct ixgb_adapter *adapter) { struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + /* Prevent stats update while adapter is being reset */ + if (pdev->error_state && pdev->error_state != pci_channel_io_normal) + return; if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { @@ -1787,7 +1810,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter) if (unlikely(netif_queue_stopped(netdev))) { spin_lock(&adapter->tx_lock); if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev) && - (IXGB_DESC_UNUSED(tx_ring) > IXGB_TX_QUEUE_WAKE)) + (IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) netif_wake_queue(netdev); spin_unlock(&adapter->tx_lock); } @@ -1948,10 +1971,9 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) #define IXGB_CB_LENGTH 256 if (length < IXGB_CB_LENGTH) { struct sk_buff *new_skb = - dev_alloc_skb(length + NET_IP_ALIGN); + netdev_alloc_skb(netdev, length + NET_IP_ALIGN); if (new_skb) { skb_reserve(new_skb, NET_IP_ALIGN); - new_skb->dev = netdev; memcpy(new_skb->data - NET_IP_ALIGN, skb->data - NET_IP_ALIGN, length + NET_IP_ALIGN); @@ -2031,14 +2053,14 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) /* leave three descriptors unused */ while(--cleancount > 2) { /* recycle! its good for you */ - if (!(skb = buffer_info->skb)) - skb = dev_alloc_skb(adapter->rx_buffer_len - + NET_IP_ALIGN); - else { + skb = buffer_info->skb; + if (skb) { skb_trim(skb, 0); goto map_skb; } + skb = netdev_alloc_skb(netdev, adapter->rx_buffer_len + + NET_IP_ALIGN); if (unlikely(!skb)) { /* Better luck next round */ adapter->alloc_rx_buff_failed++; @@ -2051,8 +2073,6 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) */ skb_reserve(skb, NET_IP_ALIGN); - skb->dev = netdev; - buffer_info->skb = skb; buffer_info->length = adapter->rx_buffer_len; map_skb: @@ -2190,7 +2210,7 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter) static void ixgb_netpoll(struct net_device *dev) { - struct ixgb_adapter *adapter = dev->priv; + struct ixgb_adapter *adapter = netdev_priv(dev); disable_irq(adapter->pdev->irq); ixgb_intr(adapter->pdev->irq, dev, NULL); @@ -2198,4 +2218,98 @@ static void ixgb_netpoll(struct net_device *dev) } #endif +/** + * ixgb_io_error_detected() - called when PCI error is detected + * @pdev pointer to pci device with error + * @state pci channel state after error + * + * This callback is called by the PCI subsystem whenever + * a PCI bus error is detected. + */ +static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, + enum pci_channel_state state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev->priv; + + if(netif_running(netdev)) + ixgb_down(adapter, TRUE); + + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * ixgb_io_slot_reset - called after the pci bus has been reset. + * @pdev pointer to pci device with error + * + * This callback is called after the PCI buss has been reset. + * Basically, this tries to restart the card from scratch. + * This is a shortened version of the device probe/discovery code, + * it resembles the first-half of the ixgb_probe() routine. + */ +static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev->priv; + + if(pci_enable_device(pdev)) { + DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + /* Perform card reset only on one instance of the card */ + if (0 != PCI_FUNC (pdev->devfn)) + return PCI_ERS_RESULT_RECOVERED; + + pci_set_master(pdev); + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + ixgb_reset(adapter); + + /* Make sure the EEPROM is good */ + if(!ixgb_validate_eeprom_checksum(&adapter->hw)) { + DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); + + if(!is_valid_ether_addr(netdev->perm_addr)) { + DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * ixgb_io_resume - called when its OK to resume normal operations + * @pdev pointer to pci device with error + * + * The error recovery driver tells us that its OK to resume + * normal operation. Implementation resembles the second-half + * of the ixgb_probe() routine. + */ +static void ixgb_io_resume (struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev->priv; + + pci_set_master(pdev); + + if(netif_running(netdev)) { + if(ixgb_up(adapter)) { + printk ("ixgb: can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); + mod_timer(&adapter->watchdog_timer, jiffies); +} + /* ixgb_main.c */ diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 9bdd43ab357..b19e2034d11 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -187,11 +187,14 @@ struct myri10ge_priv { u8 mac_addr[6]; /* eeprom mac address */ unsigned long serial_number; int vendor_specific_offset; + int fw_multicast_support; u32 devctl; u16 msi_flags; u32 read_dma; u32 write_dma; u32 read_write_dma; + u32 link_changes; + u32 msg_enable; }; static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat"; @@ -257,6 +260,12 @@ module_param(myri10ge_max_irq_loops, int, S_IRUGO); MODULE_PARM_DESC(myri10ge_max_irq_loops, "Set stuck legacy IRQ detection threshold\n"); +#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK + +static int myri10ge_debug = -1; /* defaults above */ +module_param(myri10ge_debug, int, 0); +MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)"); + #define MYRI10GE_FW_OFFSET 1024*1024 #define MYRI10GE_HIGHPART_TO_U32(X) \ (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0) @@ -271,7 +280,7 @@ myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd, struct mcp_cmd *buf; char buf_bytes[sizeof(*buf) + 8]; struct mcp_cmd_response *response = mgp->cmd; - char __iomem *cmd_addr = mgp->sram + MXGEFW_CMD_OFFSET; + char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD; u32 dma_low, dma_high, result, value; int sleep_total = 0; @@ -320,6 +329,8 @@ myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd, if (result == 0) { data->data0 = value; return 0; + } else if (result == MXGEFW_CMD_UNKNOWN) { + return -ENOSYS; } else { dev_err(&mgp->pdev->dev, "command %d failed, result = %d\n", @@ -404,7 +415,7 @@ static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable) buf[4] = htonl(dma_low); /* dummy addr LSW */ buf[5] = htonl(enable); /* enable? */ - submit = mgp->sram + 0xfc01c0; + submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA; myri10ge_pio_copy(submit, &buf, sizeof(buf)); for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++) @@ -600,7 +611,7 @@ static int myri10ge_load_firmware(struct myri10ge_priv *mgp) buf[5] = htonl(8); /* where to copy to */ buf[6] = htonl(0); /* where to jump to */ - submit = mgp->sram + 0xfc0000; + submit = mgp->sram + MXGEFW_BOOT_HANDOFF; myri10ge_pio_copy(submit, &buf, sizeof(buf)); mb(); @@ -764,6 +775,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) mgp->rx_small.cnt = 0; mgp->rx_done.idx = 0; mgp->rx_done.cnt = 0; + mgp->link_changes = 0; status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr); myri10ge_change_promisc(mgp, 0, 0); myri10ge_change_pause(mgp, mgp->pause); @@ -798,12 +810,13 @@ myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst, * pages directly and building a fraglist in the near future. */ -static inline struct sk_buff *myri10ge_alloc_big(int bytes) +static inline struct sk_buff *myri10ge_alloc_big(struct net_device *dev, + int bytes) { struct sk_buff *skb; unsigned long data, roundup; - skb = dev_alloc_skb(bytes + 4096 + MXGEFW_PAD); + skb = netdev_alloc_skb(dev, bytes + 4096 + MXGEFW_PAD); if (skb == NULL) return NULL; @@ -821,12 +834,13 @@ static inline struct sk_buff *myri10ge_alloc_big(int bytes) /* Allocate 2x as much space as required and use whichever portion * does not cross a 4KB boundary */ -static inline struct sk_buff *myri10ge_alloc_small_safe(unsigned int bytes) +static inline struct sk_buff *myri10ge_alloc_small_safe(struct net_device *dev, + unsigned int bytes) { struct sk_buff *skb; unsigned long data, boundary; - skb = dev_alloc_skb(2 * (bytes + MXGEFW_PAD) - 1); + skb = netdev_alloc_skb(dev, 2 * (bytes + MXGEFW_PAD) - 1); if (unlikely(skb == NULL)) return NULL; @@ -847,12 +861,13 @@ static inline struct sk_buff *myri10ge_alloc_small_safe(unsigned int bytes) /* Allocate just enough space, and verify that the allocated * space does not cross a 4KB boundary */ -static inline struct sk_buff *myri10ge_alloc_small(int bytes) +static inline struct sk_buff *myri10ge_alloc_small(struct net_device *dev, + int bytes) { struct sk_buff *skb; unsigned long roundup, data, end; - skb = dev_alloc_skb(bytes + 16 + MXGEFW_PAD); + skb = netdev_alloc_skb(dev, bytes + 16 + MXGEFW_PAD); if (unlikely(skb == NULL)) return NULL; @@ -868,15 +883,17 @@ static inline struct sk_buff *myri10ge_alloc_small(int bytes) "myri10ge_alloc_small: small skb crossed 4KB boundary\n"); myri10ge_skb_cross_4k = 1; dev_kfree_skb_any(skb); - skb = myri10ge_alloc_small_safe(bytes); + skb = myri10ge_alloc_small_safe(dev, bytes); } return skb; } static inline int -myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct pci_dev *pdev, int bytes, - int idx) +myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct myri10ge_priv *mgp, + int bytes, int idx) { + struct net_device *dev = mgp->dev; + struct pci_dev *pdev = mgp->pdev; struct sk_buff *skb; dma_addr_t bus; int len, retval = 0; @@ -884,11 +901,11 @@ myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct pci_dev *pdev, int bytes, bytes += VLAN_HLEN; /* account for 802.1q vlan tag */ if ((bytes + MXGEFW_PAD) > (4096 - 16) /* linux overhead */ ) - skb = myri10ge_alloc_big(bytes); + skb = myri10ge_alloc_big(dev, bytes); else if (myri10ge_skb_cross_4k) - skb = myri10ge_alloc_small_safe(bytes); + skb = myri10ge_alloc_small_safe(dev, bytes); else - skb = myri10ge_alloc_small(bytes); + skb = myri10ge_alloc_small(dev, bytes); if (unlikely(skb == NULL)) { rx->alloc_fail++; @@ -951,7 +968,7 @@ myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx, unmap_len = pci_unmap_len(&rx->info[idx], len); /* try to replace the received skb */ - if (myri10ge_getbuf(rx, mgp->pdev, bytes, idx)) { + if (myri10ge_getbuf(rx, mgp, bytes, idx)) { /* drop the frame -- the old skbuf is re-cycled */ mgp->stats.rx_dropped += 1; return 0; @@ -968,7 +985,6 @@ myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx, skb_put(skb, len); skb->protocol = eth_type_trans(skb, mgp->dev); - skb->dev = mgp->dev; if (mgp->csum_flag) { if ((skb->protocol == ntohs(ETH_P_IP)) || (skb->protocol == ntohs(ETH_P_IPV6))) { @@ -1081,13 +1097,19 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp) if (mgp->link_state != stats->link_up) { mgp->link_state = stats->link_up; if (mgp->link_state) { - printk(KERN_INFO "myri10ge: %s: link up\n", - mgp->dev->name); + if (netif_msg_link(mgp)) + printk(KERN_INFO + "myri10ge: %s: link up\n", + mgp->dev->name); netif_carrier_on(mgp->dev); + mgp->link_changes++; } else { - printk(KERN_INFO "myri10ge: %s: link down\n", - mgp->dev->name); + if (netif_msg_link(mgp)) + printk(KERN_INFO + "myri10ge: %s: link down\n", + mgp->dev->name); netif_carrier_off(mgp->dev); + mgp->link_changes++; } } if (mgp->rdma_tags_available != @@ -1289,7 +1311,8 @@ static const char myri10ge_gstrings_stats[][ETH_GSTRING_LEN] = { "serial_number", "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt", "wake_queue", "stop_queue", "watchdog_resets", "tx_linearized", - "link_up", "dropped_link_overflow", "dropped_link_error_or_filtered", + "link_changes", "link_up", "dropped_link_overflow", + "dropped_link_error_or_filtered", "dropped_multicast_filtered", "dropped_runt", "dropped_overrun", "dropped_no_small_buffer", "dropped_no_big_buffer" }; @@ -1341,16 +1364,31 @@ myri10ge_get_ethtool_stats(struct net_device *netdev, data[i++] = (unsigned int)mgp->stop_queue; data[i++] = (unsigned int)mgp->watchdog_resets; data[i++] = (unsigned int)mgp->tx_linearized; + data[i++] = (unsigned int)mgp->link_changes; data[i++] = (unsigned int)ntohl(mgp->fw_stats->link_up); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_error_or_filtered); + data[i++] = + (unsigned int)ntohl(mgp->fw_stats->dropped_multicast_filtered); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_runt); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_overrun); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_small_buffer); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_big_buffer); } +static void myri10ge_set_msglevel(struct net_device *netdev, u32 value) +{ + struct myri10ge_priv *mgp = netdev_priv(netdev); + mgp->msg_enable = value; +} + +static u32 myri10ge_get_msglevel(struct net_device *netdev) +{ + struct myri10ge_priv *mgp = netdev_priv(netdev); + return mgp->msg_enable; +} + static struct ethtool_ops myri10ge_ethtool_ops = { .get_settings = myri10ge_get_settings, .get_drvinfo = myri10ge_get_drvinfo, @@ -1371,7 +1409,9 @@ static struct ethtool_ops myri10ge_ethtool_ops = { #endif .get_strings = myri10ge_get_strings, .get_stats_count = myri10ge_get_stats_count, - .get_ethtool_stats = myri10ge_get_ethtool_stats + .get_ethtool_stats = myri10ge_get_ethtool_stats, + .set_msglevel = myri10ge_set_msglevel, + .get_msglevel = myri10ge_get_msglevel }; static int myri10ge_allocate_rings(struct net_device *dev) @@ -1439,7 +1479,7 @@ static int myri10ge_allocate_rings(struct net_device *dev) /* Fill the receive rings */ for (i = 0; i <= mgp->rx_small.mask; i++) { - status = myri10ge_getbuf(&mgp->rx_small, mgp->pdev, + status = myri10ge_getbuf(&mgp->rx_small, mgp, mgp->small_bytes, i); if (status) { printk(KERN_ERR @@ -1451,8 +1491,7 @@ static int myri10ge_allocate_rings(struct net_device *dev) for (i = 0; i <= mgp->rx_big.mask; i++) { status = - myri10ge_getbuf(&mgp->rx_big, mgp->pdev, - dev->mtu + ETH_HLEN, i); + myri10ge_getbuf(&mgp->rx_big, mgp, dev->mtu + ETH_HLEN, i); if (status) { printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n", @@ -1648,9 +1687,11 @@ static int myri10ge_open(struct net_device *dev) } if (mgp->mtrr >= 0) { - mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + 0x200000; - mgp->rx_small.wc_fifo = (u8 __iomem *) mgp->sram + 0x300000; - mgp->rx_big.wc_fifo = (u8 __iomem *) mgp->sram + 0x340000; + mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4; + mgp->rx_small.wc_fifo = + (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL; + mgp->rx_big.wc_fifo = + (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_BIG; } else { mgp->tx.wc_fifo = NULL; mgp->rx_small.wc_fifo = NULL; @@ -1686,7 +1727,21 @@ static int myri10ge_open(struct net_device *dev) cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->fw_stats_bus); cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->fw_stats_bus); - status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA, &cmd, 0); + cmd.data2 = sizeof(struct mcp_irq_data); + status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0); + if (status == -ENOSYS) { + dma_addr_t bus = mgp->fw_stats_bus; + bus += offsetof(struct mcp_irq_data, send_done_count); + cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus); + status = myri10ge_send_cmd(mgp, + MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, + &cmd, 0); + /* Firmware cannot support multicast without STATS_DMA_V2 */ + mgp->fw_multicast_support = 0; + } else { + mgp->fw_multicast_support = 1; + } if (status) { printk(KERN_ERR "myri10ge: %s: Couldn't set stats DMA\n", dev->name); @@ -1841,7 +1896,8 @@ myri10ge_submit_req_wc(struct myri10ge_tx_buf *tx, if (cnt > 0) { /* pad it to 64 bytes. The src is 64 bytes bigger than it * needs to be so that we don't overrun it */ - myri10ge_pio_copy(tx->wc_fifo + (cnt << 18), src, 64); + myri10ge_pio_copy(tx->wc_fifo + MXGEFW_ETH_SEND_OFFSET(cnt), + src, 64); mb(); } } @@ -2140,9 +2196,81 @@ static struct net_device_stats *myri10ge_get_stats(struct net_device *dev) static void myri10ge_set_multicast_list(struct net_device *dev) { + struct myri10ge_cmd cmd; + struct myri10ge_priv *mgp; + struct dev_mc_list *mc_list; + int err; + + mgp = netdev_priv(dev); /* can be called from atomic contexts, * pass 1 to force atomicity in myri10ge_send_cmd() */ - myri10ge_change_promisc(netdev_priv(dev), dev->flags & IFF_PROMISC, 1); + myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1); + + /* This firmware is known to not support multicast */ + if (!mgp->fw_multicast_support) + return; + + /* Disable multicast filtering */ + + err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1); + if (err != 0) { + printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI," + " error status: %d\n", dev->name, err); + goto abort; + } + + if (dev->flags & IFF_ALLMULTI) { + /* request to disable multicast filtering, so quit here */ + return; + } + + /* Flush the filters */ + + err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, + &cmd, 1); + if (err != 0) { + printk(KERN_ERR + "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS" + ", error status: %d\n", dev->name, err); + goto abort; + } + + /* Walk the multicast list, and add each address */ + for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) { + memcpy(&cmd.data0, &mc_list->dmi_addr, 4); + memcpy(&cmd.data1, ((char *)&mc_list->dmi_addr) + 4, 2); + cmd.data0 = htonl(cmd.data0); + cmd.data1 = htonl(cmd.data1); + err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP, + &cmd, 1); + + if (err != 0) { + printk(KERN_ERR "myri10ge: %s: Failed " + "MXGEFW_JOIN_MULTICAST_GROUP, error status:" + "%d\t", dev->name, err); + printk(KERN_ERR "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ((unsigned char *)&mc_list->dmi_addr)[0], + ((unsigned char *)&mc_list->dmi_addr)[1], + ((unsigned char *)&mc_list->dmi_addr)[2], + ((unsigned char *)&mc_list->dmi_addr)[3], + ((unsigned char *)&mc_list->dmi_addr)[4], + ((unsigned char *)&mc_list->dmi_addr)[5] + ); + goto abort; + } + } + /* Enable multicast filtering */ + err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1); + if (err != 0) { + printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI," + "error status: %d\n", dev->name, err); + goto abort; + } + + return; + +abort: + return; } static int myri10ge_set_mac_address(struct net_device *dev, void *addr) @@ -2289,6 +2417,8 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) */ #define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132 +#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7 +#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa static void myri10ge_select_firmware(struct myri10ge_priv *mgp) { @@ -2298,15 +2428,34 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp) mgp->fw_name = myri10ge_fw_unaligned; if (myri10ge_force_firmware == 0) { + int link_width, exp_cap; + u16 lnk; + + exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP); + pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk); + link_width = (lnk >> 4) & 0x3f; + myri10ge_enable_ecrc(mgp); - /* Check to see if the upstream bridge is known to - * provide aligned completions */ - if (bridge - /* ServerWorks HT2000/HT1000 */ - && bridge->vendor == PCI_VENDOR_ID_SERVERWORKS - && bridge->device == - PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE) { + /* Check to see if Link is less than 8 or if the + * upstream bridge is known to provide aligned + * completions */ + if (link_width < 8) { + dev_info(&mgp->pdev->dev, "PCIE x%d Link\n", + link_width); + mgp->tx.boundary = 4096; + mgp->fw_name = myri10ge_fw_aligned; + } else if (bridge && + /* ServerWorks HT2000/HT1000 */ + ((bridge->vendor == PCI_VENDOR_ID_SERVERWORKS + && bridge->device == + PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE) + /* All Intel E5000 PCIE ports */ + || (bridge->vendor == PCI_VENDOR_ID_INTEL + && bridge->device >= + PCI_DEVICE_ID_INTEL_E5000_PCIE23 + && bridge->device <= + PCI_DEVICE_ID_INTEL_E5000_PCIE47))) { dev_info(&mgp->pdev->dev, "Assuming aligned completions (0x%x:0x%x)\n", bridge->vendor, bridge->device); @@ -2581,6 +2730,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) mgp->csum_flag = MXGEFW_FLAGS_CKSUM; mgp->pause = myri10ge_flow_control; mgp->intr_coal_delay = myri10ge_intr_coal_delay; + mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT); init_waitqueue_head(&mgp->down_wq); if (pci_enable_device(pdev)) { diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index 0a6cae6cb18..9519ae7cd5e 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -91,7 +91,19 @@ struct mcp_kreq_ether_recv { /* Commands */ -#define MXGEFW_CMD_OFFSET 0xf80000 +#define MXGEFW_BOOT_HANDOFF 0xfc0000 +#define MXGEFW_BOOT_DUMMY_RDMA 0xfc01c0 + +#define MXGEFW_ETH_CMD 0xf80000 +#define MXGEFW_ETH_SEND_4 0x200000 +#define MXGEFW_ETH_SEND_1 0x240000 +#define MXGEFW_ETH_SEND_2 0x280000 +#define MXGEFW_ETH_SEND_3 0x2c0000 +#define MXGEFW_ETH_RECV_SMALL 0x300000 +#define MXGEFW_ETH_RECV_BIG 0x340000 + +#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000)) +#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4) enum myri10ge_mcp_cmd_type { MXGEFW_CMD_NONE = 0, @@ -154,7 +166,7 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_SET_MTU, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, /* in microseconds */ MXGEFW_CMD_SET_STATS_INTERVAL, /* in microseconds */ - MXGEFW_CMD_SET_STATS_DMA, + MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, /* replaced by SET_STATS_DMA_V2 */ MXGEFW_ENABLE_PROMISC, MXGEFW_DISABLE_PROMISC, @@ -168,7 +180,26 @@ enum myri10ge_mcp_cmd_type { * data2 = RDMA length (MSH), WDMA length (LSH) * command return data = repetitions (MSH), 0.5-ms ticks (LSH) */ - MXGEFW_DMA_TEST + MXGEFW_DMA_TEST, + + MXGEFW_ENABLE_ALLMULTI, + MXGEFW_DISABLE_ALLMULTI, + + /* returns MXGEFW_CMD_ERROR_MULTICAST + * if there is no room in the cache + * data0,MSH(data1) = multicast group address */ + MXGEFW_JOIN_MULTICAST_GROUP, + /* returns MXGEFW_CMD_ERROR_MULTICAST + * if the address is not in the cache, + * or is equal to FF-FF-FF-FF-FF-FF + * data0,MSH(data1) = multicast group address */ + MXGEFW_LEAVE_MULTICAST_GROUP, + MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, + + MXGEFW_CMD_SET_STATS_DMA_V2, + /* data0, data1 = bus addr, + * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows + * adding new stuff to mcp_irq_data without changing the ABI */ }; enum myri10ge_mcp_cmd_status { @@ -180,11 +211,17 @@ enum myri10ge_mcp_cmd_status { MXGEFW_CMD_ERROR_CLOSED, MXGEFW_CMD_ERROR_HASH_ERROR, MXGEFW_CMD_ERROR_BAD_PORT, - MXGEFW_CMD_ERROR_RESOURCES + MXGEFW_CMD_ERROR_RESOURCES, + MXGEFW_CMD_ERROR_MULTICAST }; -/* 40 Bytes */ +#define MXGEFW_OLD_IRQ_DATA_LEN 40 + struct mcp_irq_data { + /* add new counters at the beginning */ + u32 future_use[5]; + u32 dropped_multicast_filtered; + /* 40 Bytes */ u32 send_done_count; u32 link_up; diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index db0475a1102..9510030feeb 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -3246,7 +3246,7 @@ static int __init natsemi_init_mod (void) printk(version); #endif - return pci_module_init (&natsemi_driver); + return pci_register_driver(&natsemi_driver); } static void __exit natsemi_exit_mod (void) diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index 34bdba9eec7..654b477b570 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -702,7 +702,7 @@ static int __init ne2k_pci_init(void) #ifdef MODULE printk(version); #endif - return pci_module_init (&ne2k_driver); + return pci_register_driver(&ne2k_driver); } diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b1311ae8267..30ed9a5a40e 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c @@ -17,7 +17,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/config.h> #include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 0e76859c90a..0dedd34804c 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -2178,7 +2178,7 @@ static struct pci_driver driver = { static int __init ns83820_init(void) { printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n"); - return pci_module_init(&driver); + return pci_register_driver(&driver); } static void __exit ns83820_exit(void) diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index e0e29396404..e6347620529 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -1963,7 +1963,7 @@ static int __init netdrv_init_module (void) #ifdef MODULE printk(version); #endif - return pci_module_init (&netdrv_pci_driver); + return pci_register_driver(&netdrv_pci_driver); } diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 297e9f80536..c54f6a7ebf3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -771,6 +771,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106), PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), + PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc), PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef), PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef), @@ -786,8 +787,6 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), PCMCIA_DEVICE_PROD_ID14("Network Everywhere", "AX88190", 0x820a67b6, 0xab9be5ef), - /* this is not specific enough */ - /* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), */ PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, axnet_ids); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 0ecebfc31f0..cc0dcc9bf63 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -654,11 +654,8 @@ static int pcnet_config(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); if (info->flags & (IS_DL10019|IS_DL10022)) { - u_char id = inb(dev->base_addr + 0x1a); dev->do_ioctl = &ei_ioctl; mii_phy_probe(dev); - if ((id == 0x30) && !info->pna_phy && (info->eth_phy == 4)) - info->eth_phy = 0; } link->dev_node = &info->node; @@ -821,15 +818,6 @@ static void mdio_write(kio_addr_t addr, int phy_id, int loc, int value) } } -static void mdio_reset(kio_addr_t addr, int phy_id) -{ - outb_p(0x08, addr); - outb_p(0x0c, addr); - outb_p(0x08, addr); - outb_p(0x0c, addr); - outb_p(0x00, addr); -} - /*====================================================================== EEPROM access routines for DL10019 and DL10022 based cards @@ -942,7 +930,8 @@ static void set_misc_reg(struct net_device *dev) } if (info->flags & IS_DL10022) { if (info->flags & HAS_MII) { - mdio_reset(nic_base + DLINK_GPIO, info->eth_phy); + /* Advertise 100F, 100H, 10F, 10H */ + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); /* Restart MII autonegotiation */ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index d50bcb89dd2..5e26fe806e2 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -2978,7 +2978,7 @@ static int __init pcnet32_init_module(void) tx_start = tx_start_pt; /* find the PCI devices */ - if (!pci_module_init(&pcnet32_driver)) + if (!pci_register_driver(&pcnet32_driver)) pcnet32_have_pci = 1; /* should we find any remaining VLbus devices ? */ diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 25e31fb5cb3..b1d8ed40ad9 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -14,7 +14,6 @@ * */ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mii.h> diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index ffd215d9a9b..792716beb05 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -12,7 +12,6 @@ * */ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mii.h> diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c new file mode 100644 index 00000000000..c729aeeb469 --- /dev/null +++ b/drivers/net/qla3xxx.c @@ -0,0 +1,3537 @@ +/* + * QLogic QLA3xxx NIC HBA Driver + * Copyright (c) 2003-2006 QLogic Corporation + * + * See LICENSE.qla3xxx for copyright and licensing details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/dmapool.h> +#include <linux/mempool.h> +#include <linux/spinlock.h> +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/ip.h> +#include <linux/if_arp.h> +#include <linux/if_ether.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/rtnetlink.h> +#include <linux/if_vlan.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> + +#include "qla3xxx.h" + +#define DRV_NAME "qla3xxx" +#define DRV_STRING "QLogic ISP3XXX Network Driver" +#define DRV_VERSION "v2.02.00-k36" +#define PFX DRV_NAME " " + +static const char ql3xxx_driver_name[] = DRV_NAME; +static const char ql3xxx_driver_version[] = DRV_VERSION; + +MODULE_AUTHOR("QLogic Corporation"); +MODULE_DESCRIPTION("QLogic ISP3XXX Network Driver " DRV_VERSION " "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static const u32 default_msg + = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK + | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; + +static int debug = -1; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +static int msi; +module_param(msi, int, 0); +MODULE_PARM_DESC(msi, "Turn on Message Signaled Interrupts."); + +static struct pci_device_id ql3xxx_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3022_DEVICE_ID)}, + /* required last entry */ + {0,} +}; + +MODULE_DEVICE_TABLE(pci, ql3xxx_pci_tbl); + +/* + * Caller must take hw_lock. + */ +static int ql_sem_spinlock(struct ql3_adapter *qdev, + u32 sem_mask, u32 sem_bits) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + u32 value; + unsigned int seconds = 3; + + do { + writel((sem_mask | sem_bits), + &port_regs->CommonRegs.semaphoreReg); + value = readl(&port_regs->CommonRegs.semaphoreReg); + if ((value & (sem_mask >> 16)) == sem_bits) + return 0; + ssleep(1); + } while(--seconds); + return -1; +} + +static void ql_sem_unlock(struct ql3_adapter *qdev, u32 sem_mask) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + writel(sem_mask, &port_regs->CommonRegs.semaphoreReg); + readl(&port_regs->CommonRegs.semaphoreReg); +} + +static int ql_sem_lock(struct ql3_adapter *qdev, u32 sem_mask, u32 sem_bits) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + u32 value; + + writel((sem_mask | sem_bits), &port_regs->CommonRegs.semaphoreReg); + value = readl(&port_regs->CommonRegs.semaphoreReg); + return ((value & (sem_mask >> 16)) == sem_bits); +} + +/* + * Caller holds hw_lock. + */ +static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev) +{ + int i = 0; + + while (1) { + if (!ql_sem_lock(qdev, + QL_DRVR_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) + * 2) << 1)) { + if (i < 10) { + ssleep(1); + i++; + } else { + printk(KERN_ERR PFX "%s: Timed out waiting for " + "driver lock...\n", + qdev->ndev->name); + return 0; + } + } else { + printk(KERN_DEBUG PFX + "%s: driver lock acquired.\n", + qdev->ndev->name); + return 1; + } + } +} + +static void ql_set_register_page(struct ql3_adapter *qdev, u32 page) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + + writel(((ISP_CONTROL_NP_MASK << 16) | page), + &port_regs->CommonRegs.ispControlStatus); + readl(&port_regs->CommonRegs.ispControlStatus); + qdev->current_page = page; +} + +static u32 ql_read_common_reg_l(struct ql3_adapter *qdev, + u32 __iomem * reg) +{ + u32 value; + unsigned long hw_flags; + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + value = readl(reg); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + return value; +} + +static u32 ql_read_common_reg(struct ql3_adapter *qdev, + u32 __iomem * reg) +{ + return readl(reg); +} + +static u32 ql_read_page0_reg_l(struct ql3_adapter *qdev, u32 __iomem *reg) +{ + u32 value; + unsigned long hw_flags; + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + + if (qdev->current_page != 0) + ql_set_register_page(qdev,0); + value = readl(reg); + + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return value; +} + +static u32 ql_read_page0_reg(struct ql3_adapter *qdev, u32 __iomem *reg) +{ + if (qdev->current_page != 0) + ql_set_register_page(qdev,0); + return readl(reg); +} + +static void ql_write_common_reg_l(struct ql3_adapter *qdev, + u32 * reg, u32 value) +{ + unsigned long hw_flags; + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + writel(value, (u32 *) reg); + readl(reg); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return; +} + +static void ql_write_common_reg(struct ql3_adapter *qdev, + u32 * reg, u32 value) +{ + writel(value, (u32 *) reg); + readl(reg); + return; +} + +static void ql_write_page0_reg(struct ql3_adapter *qdev, + u32 * reg, u32 value) +{ + if (qdev->current_page != 0) + ql_set_register_page(qdev,0); + writel(value, (u32 *) reg); + readl(reg); + return; +} + +/* + * Caller holds hw_lock. Only called during init. + */ +static void ql_write_page1_reg(struct ql3_adapter *qdev, + u32 * reg, u32 value) +{ + if (qdev->current_page != 1) + ql_set_register_page(qdev,1); + writel(value, (u32 *) reg); + readl(reg); + return; +} + +/* + * Caller holds hw_lock. Only called during init. + */ +static void ql_write_page2_reg(struct ql3_adapter *qdev, + u32 * reg, u32 value) +{ + if (qdev->current_page != 2) + ql_set_register_page(qdev,2); + writel(value, (u32 *) reg); + readl(reg); + return; +} + +static void ql_disable_interrupts(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + + ql_write_common_reg_l(qdev, &port_regs->CommonRegs.ispInterruptMaskReg, + (ISP_IMR_ENABLE_INT << 16)); + +} + +static void ql_enable_interrupts(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + + ql_write_common_reg_l(qdev, &port_regs->CommonRegs.ispInterruptMaskReg, + ((0xff << 16) | ISP_IMR_ENABLE_INT)); + +} + +static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev, + struct ql_rcv_buf_cb *lrg_buf_cb) +{ + u64 map; + lrg_buf_cb->next = NULL; + + if (qdev->lrg_buf_free_tail == NULL) { /* The list is empty */ + qdev->lrg_buf_free_head = qdev->lrg_buf_free_tail = lrg_buf_cb; + } else { + qdev->lrg_buf_free_tail->next = lrg_buf_cb; + qdev->lrg_buf_free_tail = lrg_buf_cb; + } + + if (!lrg_buf_cb->skb) { + lrg_buf_cb->skb = dev_alloc_skb(qdev->lrg_buffer_len); + if (unlikely(!lrg_buf_cb->skb)) { + printk(KERN_ERR PFX "%s: failed dev_alloc_skb().\n", + qdev->ndev->name); + qdev->lrg_buf_skb_check++; + } else { + /* + * We save some space to copy the ethhdr from first + * buffer + */ + skb_reserve(lrg_buf_cb->skb, QL_HEADER_SPACE); + map = pci_map_single(qdev->pdev, + lrg_buf_cb->skb->data, + qdev->lrg_buffer_len - + QL_HEADER_SPACE, + PCI_DMA_FROMDEVICE); + lrg_buf_cb->buf_phy_addr_low = + cpu_to_le32(LS_64BITS(map)); + lrg_buf_cb->buf_phy_addr_high = + cpu_to_le32(MS_64BITS(map)); + pci_unmap_addr_set(lrg_buf_cb, mapaddr, map); + pci_unmap_len_set(lrg_buf_cb, maplen, + qdev->lrg_buffer_len - + QL_HEADER_SPACE); + } + } + + qdev->lrg_buf_free_count++; +} + +static struct ql_rcv_buf_cb *ql_get_from_lrg_buf_free_list(struct ql3_adapter + *qdev) +{ + struct ql_rcv_buf_cb *lrg_buf_cb; + + if ((lrg_buf_cb = qdev->lrg_buf_free_head) != NULL) { + if ((qdev->lrg_buf_free_head = lrg_buf_cb->next) == NULL) + qdev->lrg_buf_free_tail = NULL; + qdev->lrg_buf_free_count--; + } + + return lrg_buf_cb; +} + +static u32 addrBits = EEPROM_NO_ADDR_BITS; +static u32 dataBits = EEPROM_NO_DATA_BITS; + +static void fm93c56a_deselect(struct ql3_adapter *qdev); +static void eeprom_readword(struct ql3_adapter *qdev, u32 eepromAddr, + unsigned short *value); + +/* + * Caller holds hw_lock. + */ +static void fm93c56a_select(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_1; + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev->eeprom_cmd_data); + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data)); +} + +/* + * Caller holds hw_lock. + */ +static void fm93c56a_cmd(struct ql3_adapter *qdev, u32 cmd, u32 eepromAddr) +{ + int i; + u32 mask; + u32 dataBit; + u32 previousBit; + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + /* Clock in a zero, then do the start bit */ + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev->eeprom_cmd_data | + AUBURN_EEPROM_DO_1); + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | AUBURN_EEPROM_DO_1 | + AUBURN_EEPROM_CLK_RISE); + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | AUBURN_EEPROM_DO_1 | + AUBURN_EEPROM_CLK_FALL); + + mask = 1 << (FM93C56A_CMD_BITS - 1); + /* Force the previous data bit to be different */ + previousBit = 0xffff; + for (i = 0; i < FM93C56A_CMD_BITS; i++) { + dataBit = + (cmd & mask) ? AUBURN_EEPROM_DO_1 : AUBURN_EEPROM_DO_0; + if (previousBit != dataBit) { + /* + * If the bit changed, then change the DO state to + * match + */ + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | dataBit); + previousBit = dataBit; + } + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | dataBit | + AUBURN_EEPROM_CLK_RISE); + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | dataBit | + AUBURN_EEPROM_CLK_FALL); + cmd = cmd << 1; + } + + mask = 1 << (addrBits - 1); + /* Force the previous data bit to be different */ + previousBit = 0xffff; + for (i = 0; i < addrBits; i++) { + dataBit = + (eepromAddr & mask) ? AUBURN_EEPROM_DO_1 : + AUBURN_EEPROM_DO_0; + if (previousBit != dataBit) { + /* + * If the bit changed, then change the DO state to + * match + */ + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | dataBit); + previousBit = dataBit; + } + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | dataBit | + AUBURN_EEPROM_CLK_RISE); + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev-> + eeprom_cmd_data | dataBit | + AUBURN_EEPROM_CLK_FALL); + eepromAddr = eepromAddr << 1; + } +} + +/* + * Caller holds hw_lock. + */ +static void fm93c56a_deselect(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_0; + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev->eeprom_cmd_data); +} + +/* + * Caller holds hw_lock. + */ +static void fm93c56a_datain(struct ql3_adapter *qdev, unsigned short *value) +{ + int i; + u32 data = 0; + u32 dataBit; + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + /* Read the data bits */ + /* The first bit is a dummy. Clock right over it. */ + for (i = 0; i < dataBits; i++) { + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev->eeprom_cmd_data | + AUBURN_EEPROM_CLK_RISE); + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg, + ISP_NVRAM_MASK | qdev->eeprom_cmd_data | + AUBURN_EEPROM_CLK_FALL); + dataBit = + (ql_read_common_reg + (qdev, + &port_regs->CommonRegs. + serialPortInterfaceReg) & AUBURN_EEPROM_DI_1) ? 1 : 0; + data = (data << 1) | dataBit; + } + *value = (u16) data; +} + +/* + * Caller holds hw_lock. + */ +static void eeprom_readword(struct ql3_adapter *qdev, + u32 eepromAddr, unsigned short *value) +{ + fm93c56a_select(qdev); + fm93c56a_cmd(qdev, (int)FM93C56A_READ, eepromAddr); + fm93c56a_datain(qdev, value); + fm93c56a_deselect(qdev); +} + +static void ql_swap_mac_addr(u8 * macAddress) +{ +#ifdef __BIG_ENDIAN + u8 temp; + temp = macAddress[0]; + macAddress[0] = macAddress[1]; + macAddress[1] = temp; + temp = macAddress[2]; + macAddress[2] = macAddress[3]; + macAddress[3] = temp; + temp = macAddress[4]; + macAddress[4] = macAddress[5]; + macAddress[5] = temp; +#endif +} + +static int ql_get_nvram_params(struct ql3_adapter *qdev) +{ + u16 *pEEPROMData; + u16 checksum = 0; + u32 index; + unsigned long hw_flags; + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + + pEEPROMData = (u16 *) & qdev->nvram_data; + qdev->eeprom_cmd_data = 0; + if(ql_sem_spinlock(qdev, QL_NVRAM_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 10)) { + printk(KERN_ERR PFX"%s: Failed ql_sem_spinlock().\n", + __func__); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return -1; + } + + for (index = 0; index < EEPROM_SIZE; index++) { + eeprom_readword(qdev, index, pEEPROMData); + checksum += *pEEPROMData; + pEEPROMData++; + } + ql_sem_unlock(qdev, QL_NVRAM_SEM_MASK); + + if (checksum != 0) { + printk(KERN_ERR PFX "%s: checksum should be zero, is %x!!\n", + qdev->ndev->name, checksum); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return -1; + } + + /* + * We have a problem with endianness for the MAC addresses + * and the two 8-bit values version, and numPorts. We + * have to swap them on big endian systems. + */ + ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn0.macAddress); + ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn1.macAddress); + ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn2.macAddress); + ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn3.macAddress); + pEEPROMData = (u16 *) & qdev->nvram_data.version; + *pEEPROMData = le16_to_cpu(*pEEPROMData); + + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return checksum; +} + +static const u32 PHYAddr[2] = { + PORT0_PHY_ADDRESS, PORT1_PHY_ADDRESS +}; + +static int ql_wait_for_mii_ready(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 temp; + int count = 1000; + + while (count) { + temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg); + if (!(temp & MAC_MII_STATUS_BSY)) + return 0; + udelay(10); + count--; + } + return -1; +} + +static void ql_mii_enable_scan_mode(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 scanControl; + + if (qdev->numPorts > 1) { + /* Auto scan will cycle through multiple ports */ + scanControl = MAC_MII_CONTROL_AS | MAC_MII_CONTROL_SC; + } else { + scanControl = MAC_MII_CONTROL_SC; + } + + /* + * Scan register 1 of PHY/PETBI, + * Set up to scan both devices + * The autoscan starts from the first register, completes + * the last one before rolling over to the first + */ + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg, + PHYAddr[0] | MII_SCAN_REGISTER); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + (scanControl) | + ((MAC_MII_CONTROL_SC | MAC_MII_CONTROL_AS) << 16)); +} + +static u8 ql_mii_disable_scan_mode(struct ql3_adapter *qdev) +{ + u8 ret; + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + /* See if scan mode is enabled before we turn it off */ + if (ql_read_page0_reg(qdev, &port_regs->macMIIMgmtControlReg) & + (MAC_MII_CONTROL_AS | MAC_MII_CONTROL_SC)) { + /* Scan is enabled */ + ret = 1; + } else { + /* Scan is disabled */ + ret = 0; + } + + /* + * When disabling scan mode you must first change the MII register + * address + */ + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg, + PHYAddr[0] | MII_SCAN_REGISTER); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + ((MAC_MII_CONTROL_SC | MAC_MII_CONTROL_AS | + MAC_MII_CONTROL_RC) << 16)); + + return ret; +} + +static int ql_mii_write_reg_ex(struct ql3_adapter *qdev, + u16 regAddr, u16 value, u32 mac_index) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u8 scanWasEnabled; + + scanWasEnabled = ql_mii_disable_scan_mode(qdev); + + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s Timed out waiting for management port to " + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg, + PHYAddr[mac_index] | regAddr); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtDataReg, value); + + /* Wait for write to complete 9/10/04 SJP */ + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to" + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + if (scanWasEnabled) + ql_mii_enable_scan_mode(qdev); + + return 0; +} + +static int ql_mii_read_reg_ex(struct ql3_adapter *qdev, u16 regAddr, + u16 * value, u32 mac_index) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u8 scanWasEnabled; + u32 temp; + + scanWasEnabled = ql_mii_disable_scan_mode(qdev); + + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to " + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg, + PHYAddr[mac_index] | regAddr); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + (MAC_MII_CONTROL_RC << 16)); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + (MAC_MII_CONTROL_RC << 16) | MAC_MII_CONTROL_RC); + + /* Wait for the read to complete */ + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to " + "get free after issuing command.\n", + qdev->ndev->name); + return -1; + } + + temp = ql_read_page0_reg(qdev, &port_regs->macMIIMgmtDataReg); + *value = (u16) temp; + + if (scanWasEnabled) + ql_mii_enable_scan_mode(qdev); + + return 0; +} + +static int ql_mii_write_reg(struct ql3_adapter *qdev, u16 regAddr, u16 value) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + ql_mii_disable_scan_mode(qdev); + + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to " + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg, + qdev->PHYAddr | regAddr); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtDataReg, value); + + /* Wait for write to complete. */ + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to " + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + ql_mii_enable_scan_mode(qdev); + + return 0; +} + +static int ql_mii_read_reg(struct ql3_adapter *qdev, u16 regAddr, u16 *value) +{ + u32 temp; + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + ql_mii_disable_scan_mode(qdev); + + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to " + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg, + qdev->PHYAddr | regAddr); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + (MAC_MII_CONTROL_RC << 16)); + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + (MAC_MII_CONTROL_RC << 16) | MAC_MII_CONTROL_RC); + + /* Wait for the read to complete */ + if (ql_wait_for_mii_ready(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Timed out waiting for management port to " + "get free before issuing command.\n", + qdev->ndev->name); + return -1; + } + + temp = ql_read_page0_reg(qdev, &port_regs->macMIIMgmtDataReg); + *value = (u16) temp; + + ql_mii_enable_scan_mode(qdev); + + return 0; +} + +static void ql_petbi_reset(struct ql3_adapter *qdev) +{ + ql_mii_write_reg(qdev, PETBI_CONTROL_REG, PETBI_CTRL_SOFT_RESET); +} + +static void ql_petbi_start_neg(struct ql3_adapter *qdev) +{ + u16 reg; + + /* Enable Auto-negotiation sense */ + ql_mii_read_reg(qdev, PETBI_TBI_CTRL, ®); + reg |= PETBI_TBI_AUTO_SENSE; + ql_mii_write_reg(qdev, PETBI_TBI_CTRL, reg); + + ql_mii_write_reg(qdev, PETBI_NEG_ADVER, + PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX); + + ql_mii_write_reg(qdev, PETBI_CONTROL_REG, + PETBI_CTRL_AUTO_NEG | PETBI_CTRL_RESTART_NEG | + PETBI_CTRL_FULL_DUPLEX | PETBI_CTRL_SPEED_1000); + +} + +static void ql_petbi_reset_ex(struct ql3_adapter *qdev, u32 mac_index) +{ + ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG, PETBI_CTRL_SOFT_RESET, + mac_index); +} + +static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev, u32 mac_index) +{ + u16 reg; + + /* Enable Auto-negotiation sense */ + ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, ®, mac_index); + reg |= PETBI_TBI_AUTO_SENSE; + ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg, mac_index); + + ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER, + PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX, mac_index); + + ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG, + PETBI_CTRL_AUTO_NEG | PETBI_CTRL_RESTART_NEG | + PETBI_CTRL_FULL_DUPLEX | PETBI_CTRL_SPEED_1000, + mac_index); +} + +static void ql_petbi_init(struct ql3_adapter *qdev) +{ + ql_petbi_reset(qdev); + ql_petbi_start_neg(qdev); +} + +static void ql_petbi_init_ex(struct ql3_adapter *qdev, u32 mac_index) +{ + ql_petbi_reset_ex(qdev, mac_index); + ql_petbi_start_neg_ex(qdev, mac_index); +} + +static int ql_is_petbi_neg_pause(struct ql3_adapter *qdev) +{ + u16 reg; + + if (ql_mii_read_reg(qdev, PETBI_NEG_PARTNER, ®) < 0) + return 0; + + return (reg & PETBI_NEG_PAUSE_MASK) == PETBI_NEG_PAUSE; +} + +static int ql_phy_get_speed(struct ql3_adapter *qdev) +{ + u16 reg; + + if (ql_mii_read_reg(qdev, AUX_CONTROL_STATUS, ®) < 0) + return 0; + + reg = (((reg & 0x18) >> 3) & 3); + + if (reg == 2) + return SPEED_1000; + else if (reg == 1) + return SPEED_100; + else if (reg == 0) + return SPEED_10; + else + return -1; +} + +static int ql_is_full_dup(struct ql3_adapter *qdev) +{ + u16 reg; + + if (ql_mii_read_reg(qdev, AUX_CONTROL_STATUS, ®) < 0) + return 0; + + return (reg & PHY_AUX_DUPLEX_STAT) != 0; +} + +static int ql_is_phy_neg_pause(struct ql3_adapter *qdev) +{ + u16 reg; + + if (ql_mii_read_reg(qdev, PHY_NEG_PARTNER, ®) < 0) + return 0; + + return (reg & PHY_NEG_PAUSE) != 0; +} + +/* + * Caller holds hw_lock. + */ +static void ql_mac_enable(struct ql3_adapter *qdev, u32 enable) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 value; + + if (enable) + value = (MAC_CONFIG_REG_PE | (MAC_CONFIG_REG_PE << 16)); + else + value = (MAC_CONFIG_REG_PE << 16); + + if (qdev->mac_index) + ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value); + else + ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value); +} + +/* + * Caller holds hw_lock. + */ +static void ql_mac_cfg_soft_reset(struct ql3_adapter *qdev, u32 enable) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 value; + + if (enable) + value = (MAC_CONFIG_REG_SR | (MAC_CONFIG_REG_SR << 16)); + else + value = (MAC_CONFIG_REG_SR << 16); + + if (qdev->mac_index) + ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value); + else + ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value); +} + +/* + * Caller holds hw_lock. + */ +static void ql_mac_cfg_gig(struct ql3_adapter *qdev, u32 enable) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 value; + + if (enable) + value = (MAC_CONFIG_REG_GM | (MAC_CONFIG_REG_GM << 16)); + else + value = (MAC_CONFIG_REG_GM << 16); + + if (qdev->mac_index) + ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value); + else + ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value); +} + +/* + * Caller holds hw_lock. + */ +static void ql_mac_cfg_full_dup(struct ql3_adapter *qdev, u32 enable) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 value; + + if (enable) + value = (MAC_CONFIG_REG_FD | (MAC_CONFIG_REG_FD << 16)); + else + value = (MAC_CONFIG_REG_FD << 16); + + if (qdev->mac_index) + ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value); + else + ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value); +} + +/* + * Caller holds hw_lock. + */ +static void ql_mac_cfg_pause(struct ql3_adapter *qdev, u32 enable) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 value; + + if (enable) + value = + ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) | + ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16)); + else + value = ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16); + + if (qdev->mac_index) + ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value); + else + ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value); +} + +/* + * Caller holds hw_lock. + */ +static int ql_is_fiber(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 bitToCheck = 0; + u32 temp; + + switch (qdev->mac_index) { + case 0: + bitToCheck = PORT_STATUS_SM0; + break; + case 1: + bitToCheck = PORT_STATUS_SM1; + break; + } + + temp = ql_read_page0_reg(qdev, &port_regs->portStatus); + return (temp & bitToCheck) != 0; +} + +static int ql_is_auto_cfg(struct ql3_adapter *qdev) +{ + u16 reg; + ql_mii_read_reg(qdev, 0x00, ®); + return (reg & 0x1000) != 0; +} + +/* + * Caller holds hw_lock. + */ +static int ql_is_auto_neg_complete(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 bitToCheck = 0; + u32 temp; + + switch (qdev->mac_index) { + case 0: + bitToCheck = PORT_STATUS_AC0; + break; + case 1: + bitToCheck = PORT_STATUS_AC1; + break; + } + + temp = ql_read_page0_reg(qdev, &port_regs->portStatus); + if (temp & bitToCheck) { + if (netif_msg_link(qdev)) + printk(KERN_INFO PFX + "%s: Auto-Negotiate complete.\n", + qdev->ndev->name); + return 1; + } else { + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Auto-Negotiate incomplete.\n", + qdev->ndev->name); + return 0; + } +} + +/* + * ql_is_neg_pause() returns 1 if pause was negotiated to be on + */ +static int ql_is_neg_pause(struct ql3_adapter *qdev) +{ + if (ql_is_fiber(qdev)) + return ql_is_petbi_neg_pause(qdev); + else + return ql_is_phy_neg_pause(qdev); +} + +static int ql_auto_neg_error(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 bitToCheck = 0; + u32 temp; + + switch (qdev->mac_index) { + case 0: + bitToCheck = PORT_STATUS_AE0; + break; + case 1: + bitToCheck = PORT_STATUS_AE1; + break; + } + temp = ql_read_page0_reg(qdev, &port_regs->portStatus); + return (temp & bitToCheck) != 0; +} + +static u32 ql_get_link_speed(struct ql3_adapter *qdev) +{ + if (ql_is_fiber(qdev)) + return SPEED_1000; + else + return ql_phy_get_speed(qdev); +} + +static int ql_is_link_full_dup(struct ql3_adapter *qdev) +{ + if (ql_is_fiber(qdev)) + return 1; + else + return ql_is_full_dup(qdev); +} + +/* + * Caller holds hw_lock. + */ +static int ql_link_down_detect(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 bitToCheck = 0; + u32 temp; + + switch (qdev->mac_index) { + case 0: + bitToCheck = ISP_CONTROL_LINK_DN_0; + break; + case 1: + bitToCheck = ISP_CONTROL_LINK_DN_1; + break; + } + + temp = + ql_read_common_reg(qdev, &port_regs->CommonRegs.ispControlStatus); + return (temp & bitToCheck) != 0; +} + +/* + * Caller holds hw_lock. + */ +static int ql_link_down_detect_clear(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + switch (qdev->mac_index) { + case 0: + ql_write_common_reg(qdev, + &port_regs->CommonRegs.ispControlStatus, + (ISP_CONTROL_LINK_DN_0) | + (ISP_CONTROL_LINK_DN_0 << 16)); + break; + + case 1: + ql_write_common_reg(qdev, + &port_regs->CommonRegs.ispControlStatus, + (ISP_CONTROL_LINK_DN_1) | + (ISP_CONTROL_LINK_DN_1 << 16)); + break; + + default: + return 1; + } + + return 0; +} + +/* + * Caller holds hw_lock. + */ +static int ql_this_adapter_controls_port(struct ql3_adapter *qdev, + u32 mac_index) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 bitToCheck = 0; + u32 temp; + + switch (mac_index) { + case 0: + bitToCheck = PORT_STATUS_F1_ENABLED; + break; + case 1: + bitToCheck = PORT_STATUS_F3_ENABLED; + break; + default: + break; + } + + temp = ql_read_page0_reg(qdev, &port_regs->portStatus); + if (temp & bitToCheck) { + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: is not link master.\n", qdev->ndev->name); + return 0; + } else { + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: is link master.\n", qdev->ndev->name); + return 1; + } +} + +static void ql_phy_reset_ex(struct ql3_adapter *qdev, u32 mac_index) +{ + ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET, mac_index); +} + +static void ql_phy_start_neg_ex(struct ql3_adapter *qdev, u32 mac_index) +{ + u16 reg; + + ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, + PHY_NEG_PAUSE | PHY_NEG_ADV_SPEED | 1, mac_index); + + ql_mii_read_reg_ex(qdev, CONTROL_REG, ®, mac_index); + ql_mii_write_reg_ex(qdev, CONTROL_REG, reg | PHY_CTRL_RESTART_NEG, + mac_index); +} + +static void ql_phy_init_ex(struct ql3_adapter *qdev, u32 mac_index) +{ + ql_phy_reset_ex(qdev, mac_index); + ql_phy_start_neg_ex(qdev, mac_index); +} + +/* + * Caller holds hw_lock. + */ +static u32 ql_get_link_state(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + u32 bitToCheck = 0; + u32 temp, linkState; + + switch (qdev->mac_index) { + case 0: + bitToCheck = PORT_STATUS_UP0; + break; + case 1: + bitToCheck = PORT_STATUS_UP1; + break; + } + temp = ql_read_page0_reg(qdev, &port_regs->portStatus); + if (temp & bitToCheck) { + linkState = LS_UP; + } else { + linkState = LS_DOWN; + if (netif_msg_link(qdev)) + printk(KERN_WARNING PFX + "%s: Link is down.\n", qdev->ndev->name); + } + return linkState; +} + +static int ql_port_start(struct ql3_adapter *qdev) +{ + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) + return -1; + + if (ql_is_fiber(qdev)) { + ql_petbi_init(qdev); + } else { + /* Copper port */ + ql_phy_init_ex(qdev, qdev->mac_index); + } + + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + return 0; +} + +static int ql_finish_auto_neg(struct ql3_adapter *qdev) +{ + + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) + return -1; + + if (!ql_auto_neg_error(qdev)) { + if (test_bit(QL_LINK_MASTER,&qdev->flags)) { + /* configure the MAC */ + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: Configuring link.\n", + qdev->ndev-> + name); + ql_mac_cfg_soft_reset(qdev, 1); + ql_mac_cfg_gig(qdev, + (ql_get_link_speed + (qdev) == + SPEED_1000)); + ql_mac_cfg_full_dup(qdev, + ql_is_link_full_dup + (qdev)); + ql_mac_cfg_pause(qdev, + ql_is_neg_pause + (qdev)); + ql_mac_cfg_soft_reset(qdev, 0); + + /* enable the MAC */ + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: Enabling mac.\n", + qdev->ndev-> + name); + ql_mac_enable(qdev, 1); + } + + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: Change port_link_state LS_DOWN to LS_UP.\n", + qdev->ndev->name); + qdev->port_link_state = LS_UP; + netif_start_queue(qdev->ndev); + netif_carrier_on(qdev->ndev); + if (netif_msg_link(qdev)) + printk(KERN_INFO PFX + "%s: Link is up at %d Mbps, %s duplex.\n", + qdev->ndev->name, + ql_get_link_speed(qdev), + ql_is_link_full_dup(qdev) + ? "full" : "half"); + + } else { /* Remote error detected */ + + if (test_bit(QL_LINK_MASTER,&qdev->flags)) { + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: Remote error detected. " + "Calling ql_port_start().\n", + qdev->ndev-> + name); + /* + * ql_port_start() is shared code and needs + * to lock the PHY on it's own. + */ + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + if(ql_port_start(qdev)) {/* Restart port */ + return -1; + } else + return 0; + } + } + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + return 0; +} + +static void ql_link_state_machine(struct ql3_adapter *qdev) +{ + u32 curr_link_state; + unsigned long hw_flags; + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + + curr_link_state = ql_get_link_state(qdev); + + if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) { + if (netif_msg_link(qdev)) + printk(KERN_INFO PFX + "%s: Reset in progress, skip processing link " + "state.\n", qdev->ndev->name); + return; + } + + switch (qdev->port_link_state) { + default: + if (test_bit(QL_LINK_MASTER,&qdev->flags)) { + ql_port_start(qdev); + } + qdev->port_link_state = LS_DOWN; + /* Fall Through */ + + case LS_DOWN: + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: port_link_state = LS_DOWN.\n", + qdev->ndev->name); + if (curr_link_state == LS_UP) { + if (netif_msg_link(qdev)) + printk(KERN_DEBUG PFX + "%s: curr_link_state = LS_UP.\n", + qdev->ndev->name); + if (ql_is_auto_neg_complete(qdev)) + ql_finish_auto_neg(qdev); + + if (qdev->port_link_state == LS_UP) + ql_link_down_detect_clear(qdev); + + } + break; + + case LS_UP: + /* + * See if the link is currently down or went down and came + * back up + */ + if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (netif_msg_link(qdev)) + printk(KERN_INFO PFX "%s: Link is down.\n", + qdev->ndev->name); + qdev->port_link_state = LS_DOWN; + } + break; + } + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); +} + +/* + * Caller must take hw_lock and QL_PHY_GIO_SEM. + */ +static void ql_get_phy_owner(struct ql3_adapter *qdev) +{ + if (ql_this_adapter_controls_port(qdev, qdev->mac_index)) + set_bit(QL_LINK_MASTER,&qdev->flags); + else + clear_bit(QL_LINK_MASTER,&qdev->flags); +} + +/* + * Caller must take hw_lock and QL_PHY_GIO_SEM. + */ +static void ql_init_scan_mode(struct ql3_adapter *qdev) +{ + ql_mii_enable_scan_mode(qdev); + + if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) { + if (ql_this_adapter_controls_port(qdev, qdev->mac_index)) + ql_petbi_init_ex(qdev, qdev->mac_index); + } else { + if (ql_this_adapter_controls_port(qdev, qdev->mac_index)) + ql_phy_init_ex(qdev, qdev->mac_index); + } +} + +/* + * MII_Setup needs to be called before taking the PHY out of reset so that the + * management interface clock speed can be set properly. It would be better if + * we had a way to disable MDC until after the PHY is out of reset, but we + * don't have that capability. + */ +static int ql_mii_setup(struct ql3_adapter *qdev) +{ + u32 reg; + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) + return -1; + + /* Divide 125MHz clock by 28 to meet PHY timing requirements */ + reg = MAC_MII_CONTROL_CLK_SEL_DIV28; + + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, + reg | ((MAC_MII_CONTROL_CLK_SEL_MASK) << 16)); + + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + return 0; +} + +static u32 ql_supported_modes(struct ql3_adapter *qdev) +{ + u32 supported; + + if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) { + supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + } else { + supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg | SUPPORTED_TP; + } + + return supported; +} + +static int ql_get_auto_cfg_status(struct ql3_adapter *qdev) +{ + int status; + unsigned long hw_flags; + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) + return 0; + status = ql_is_auto_cfg(qdev); + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return status; +} + +static u32 ql_get_speed(struct ql3_adapter *qdev) +{ + u32 status; + unsigned long hw_flags; + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) + return 0; + status = ql_get_link_speed(qdev); + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return status; +} + +static int ql_get_full_dup(struct ql3_adapter *qdev) +{ + int status; + unsigned long hw_flags; + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) + return 0; + status = ql_is_link_full_dup(qdev); + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + return status; +} + + +static int ql_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + + ecmd->transceiver = XCVR_INTERNAL; + ecmd->supported = ql_supported_modes(qdev); + + if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) { + ecmd->port = PORT_FIBRE; + } else { + ecmd->port = PORT_TP; + ecmd->phy_address = qdev->PHYAddr; + } + ecmd->advertising = ql_supported_modes(qdev); + ecmd->autoneg = ql_get_auto_cfg_status(qdev); + ecmd->speed = ql_get_speed(qdev); + ecmd->duplex = ql_get_full_dup(qdev); + return 0; +} + +static void ql_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *drvinfo) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + strncpy(drvinfo->driver, ql3xxx_driver_name, 32); + strncpy(drvinfo->version, ql3xxx_driver_version, 32); + strncpy(drvinfo->fw_version, "N/A", 32); + strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = 0; + drvinfo->eedump_len = 0; +} + +static u32 ql_get_msglevel(struct net_device *ndev) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + return qdev->msg_enable; +} + +static void ql_set_msglevel(struct net_device *ndev, u32 value) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + qdev->msg_enable = value; +} + +static struct ethtool_ops ql3xxx_ethtool_ops = { + .get_settings = ql_get_settings, + .get_drvinfo = ql_get_drvinfo, + .get_perm_addr = ethtool_op_get_perm_addr, + .get_link = ethtool_op_get_link, + .get_msglevel = ql_get_msglevel, + .set_msglevel = ql_set_msglevel, +}; + +static int ql_populate_free_queue(struct ql3_adapter *qdev) +{ + struct ql_rcv_buf_cb *lrg_buf_cb = qdev->lrg_buf_free_head; + u64 map; + + while (lrg_buf_cb) { + if (!lrg_buf_cb->skb) { + lrg_buf_cb->skb = dev_alloc_skb(qdev->lrg_buffer_len); + if (unlikely(!lrg_buf_cb->skb)) { + printk(KERN_DEBUG PFX + "%s: Failed dev_alloc_skb().\n", + qdev->ndev->name); + break; + } else { + /* + * We save some space to copy the ethhdr from + * first buffer + */ + skb_reserve(lrg_buf_cb->skb, QL_HEADER_SPACE); + map = pci_map_single(qdev->pdev, + lrg_buf_cb->skb->data, + qdev->lrg_buffer_len - + QL_HEADER_SPACE, + PCI_DMA_FROMDEVICE); + lrg_buf_cb->buf_phy_addr_low = + cpu_to_le32(LS_64BITS(map)); + lrg_buf_cb->buf_phy_addr_high = + cpu_to_le32(MS_64BITS(map)); + pci_unmap_addr_set(lrg_buf_cb, mapaddr, map); + pci_unmap_len_set(lrg_buf_cb, maplen, + qdev->lrg_buffer_len - + QL_HEADER_SPACE); + --qdev->lrg_buf_skb_check; + if (!qdev->lrg_buf_skb_check) + return 1; + } + } + lrg_buf_cb = lrg_buf_cb->next; + } + return 0; +} + +/* + * Caller holds hw_lock. + */ +static void ql_update_lrg_bufq_prod_index(struct ql3_adapter *qdev) +{ + struct bufq_addr_element *lrg_buf_q_ele; + int i; + struct ql_rcv_buf_cb *lrg_buf_cb; + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + + if ((qdev->lrg_buf_free_count >= 8) + && (qdev->lrg_buf_release_cnt >= 16)) { + + if (qdev->lrg_buf_skb_check) + if (!ql_populate_free_queue(qdev)) + return; + + lrg_buf_q_ele = qdev->lrg_buf_next_free; + + while ((qdev->lrg_buf_release_cnt >= 16) + && (qdev->lrg_buf_free_count >= 8)) { + + for (i = 0; i < 8; i++) { + lrg_buf_cb = + ql_get_from_lrg_buf_free_list(qdev); + lrg_buf_q_ele->addr_high = + lrg_buf_cb->buf_phy_addr_high; + lrg_buf_q_ele->addr_low = + lrg_buf_cb->buf_phy_addr_low; + lrg_buf_q_ele++; + + qdev->lrg_buf_release_cnt--; + } + + qdev->lrg_buf_q_producer_index++; + + if (qdev->lrg_buf_q_producer_index == NUM_LBUFQ_ENTRIES) + qdev->lrg_buf_q_producer_index = 0; + + if (qdev->lrg_buf_q_producer_index == + (NUM_LBUFQ_ENTRIES - 1)) { + lrg_buf_q_ele = qdev->lrg_buf_q_virt_addr; + } + } + + qdev->lrg_buf_next_free = lrg_buf_q_ele; + + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs. + rxLargeQProducerIndex, + qdev->lrg_buf_q_producer_index); + } +} + +static void ql_process_mac_tx_intr(struct ql3_adapter *qdev, + struct ob_mac_iocb_rsp *mac_rsp) +{ + struct ql_tx_buf_cb *tx_cb; + + tx_cb = &qdev->tx_buf[mac_rsp->transaction_id]; + pci_unmap_single(qdev->pdev, + pci_unmap_addr(tx_cb, mapaddr), + pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE); + dev_kfree_skb_irq(tx_cb->skb); + qdev->stats.tx_packets++; + qdev->stats.tx_bytes += tx_cb->skb->len; + tx_cb->skb = NULL; + atomic_inc(&qdev->tx_count); +} + +static void ql_process_mac_rx_intr(struct ql3_adapter *qdev, + struct ib_mac_iocb_rsp *ib_mac_rsp_ptr) +{ + long int offset; + u32 lrg_buf_phy_addr_low = 0; + struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL; + struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL; + u32 *curr_ial_ptr; + struct sk_buff *skb; + u16 length = le16_to_cpu(ib_mac_rsp_ptr->length); + + /* + * Get the inbound address list (small buffer). + */ + offset = qdev->small_buf_index * QL_SMALL_BUFFER_SIZE; + if (++qdev->small_buf_index == NUM_SMALL_BUFFERS) + qdev->small_buf_index = 0; + + curr_ial_ptr = (u32 *) (qdev->small_buf_virt_addr + offset); + qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset; + qdev->small_buf_release_cnt++; + + /* start of first buffer */ + lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr); + lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index]; + qdev->lrg_buf_release_cnt++; + if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) + qdev->lrg_buf_index = 0; + curr_ial_ptr++; /* 64-bit pointers require two incs. */ + curr_ial_ptr++; + + /* start of second buffer */ + lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr); + lrg_buf_cb2 = &qdev->lrg_buf[qdev->lrg_buf_index]; + + /* + * Second buffer gets sent up the stack. + */ + qdev->lrg_buf_release_cnt++; + if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) + qdev->lrg_buf_index = 0; + skb = lrg_buf_cb2->skb; + + qdev->stats.rx_packets++; + qdev->stats.rx_bytes += length; + + skb_put(skb, length); + pci_unmap_single(qdev->pdev, + pci_unmap_addr(lrg_buf_cb2, mapaddr), + pci_unmap_len(lrg_buf_cb2, maplen), + PCI_DMA_FROMDEVICE); + prefetch(skb->data); + skb->dev = qdev->ndev; + skb->ip_summed = CHECKSUM_NONE; + skb->protocol = eth_type_trans(skb, qdev->ndev); + + netif_receive_skb(skb); + qdev->ndev->last_rx = jiffies; + lrg_buf_cb2->skb = NULL; + + ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1); + ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2); +} + +static void ql_process_macip_rx_intr(struct ql3_adapter *qdev, + struct ib_ip_iocb_rsp *ib_ip_rsp_ptr) +{ + long int offset; + u32 lrg_buf_phy_addr_low = 0; + struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL; + struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL; + u32 *curr_ial_ptr; + struct sk_buff *skb1, *skb2; + struct net_device *ndev = qdev->ndev; + u16 length = le16_to_cpu(ib_ip_rsp_ptr->length); + u16 size = 0; + + /* + * Get the inbound address list (small buffer). + */ + + offset = qdev->small_buf_index * QL_SMALL_BUFFER_SIZE; + if (++qdev->small_buf_index == NUM_SMALL_BUFFERS) + qdev->small_buf_index = 0; + curr_ial_ptr = (u32 *) (qdev->small_buf_virt_addr + offset); + qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset; + qdev->small_buf_release_cnt++; + + /* start of first buffer */ + lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr); + lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index]; + + qdev->lrg_buf_release_cnt++; + if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) + qdev->lrg_buf_index = 0; + skb1 = lrg_buf_cb1->skb; + curr_ial_ptr++; /* 64-bit pointers require two incs. */ + curr_ial_ptr++; + + /* start of second buffer */ + lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr); + lrg_buf_cb2 = &qdev->lrg_buf[qdev->lrg_buf_index]; + skb2 = lrg_buf_cb2->skb; + qdev->lrg_buf_release_cnt++; + if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) + qdev->lrg_buf_index = 0; + + qdev->stats.rx_packets++; + qdev->stats.rx_bytes += length; + + /* + * Copy the ethhdr from first buffer to second. This + * is necessary for IP completions. + */ + if (*((u16 *) skb1->data) != 0xFFFF) + size = VLAN_ETH_HLEN; + else + size = ETH_HLEN; + + skb_put(skb2, length); /* Just the second buffer length here. */ + pci_unmap_single(qdev->pdev, + pci_unmap_addr(lrg_buf_cb2, mapaddr), + pci_unmap_len(lrg_buf_cb2, maplen), + PCI_DMA_FROMDEVICE); + prefetch(skb2->data); + + memcpy(skb_push(skb2, size), skb1->data + VLAN_ID_LEN, size); + skb2->dev = qdev->ndev; + skb2->ip_summed = CHECKSUM_NONE; + skb2->protocol = eth_type_trans(skb2, qdev->ndev); + + netif_receive_skb(skb2); + ndev->last_rx = jiffies; + lrg_buf_cb2->skb = NULL; + + ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1); + ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2); +} + +static int ql_tx_rx_clean(struct ql3_adapter *qdev, + int *tx_cleaned, int *rx_cleaned, int work_to_do) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + struct net_rsp_iocb *net_rsp; + struct net_device *ndev = qdev->ndev; + unsigned long hw_flags; + + /* While there are entries in the completion queue. */ + while ((cpu_to_le32(*(qdev->prsp_producer_index)) != + qdev->rsp_consumer_index) && (*rx_cleaned < work_to_do)) { + + net_rsp = qdev->rsp_current; + switch (net_rsp->opcode) { + + case OPCODE_OB_MAC_IOCB_FN0: + case OPCODE_OB_MAC_IOCB_FN2: + ql_process_mac_tx_intr(qdev, (struct ob_mac_iocb_rsp *) + net_rsp); + (*tx_cleaned)++; + break; + + case OPCODE_IB_MAC_IOCB: + ql_process_mac_rx_intr(qdev, (struct ib_mac_iocb_rsp *) + net_rsp); + (*rx_cleaned)++; + break; + + case OPCODE_IB_IP_IOCB: + ql_process_macip_rx_intr(qdev, (struct ib_ip_iocb_rsp *) + net_rsp); + (*rx_cleaned)++; + break; + default: + { + u32 *tmp = (u32 *) net_rsp; + printk(KERN_ERR PFX + "%s: Hit default case, not " + "handled!\n" + " dropping the packet, opcode = " + "%x.\n", + ndev->name, net_rsp->opcode); + printk(KERN_ERR PFX + "0x%08lx 0x%08lx 0x%08lx 0x%08lx \n", + (unsigned long int)tmp[0], + (unsigned long int)tmp[1], + (unsigned long int)tmp[2], + (unsigned long int)tmp[3]); + } + } + + qdev->rsp_consumer_index++; + + if (qdev->rsp_consumer_index == NUM_RSP_Q_ENTRIES) { + qdev->rsp_consumer_index = 0; + qdev->rsp_current = qdev->rsp_q_virt_addr; + } else { + qdev->rsp_current++; + } + } + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + + ql_update_lrg_bufq_prod_index(qdev); + + if (qdev->small_buf_release_cnt >= 16) { + while (qdev->small_buf_release_cnt >= 16) { + qdev->small_buf_q_producer_index++; + + if (qdev->small_buf_q_producer_index == + NUM_SBUFQ_ENTRIES) + qdev->small_buf_q_producer_index = 0; + qdev->small_buf_release_cnt -= 8; + } + + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs. + rxSmallQProducerIndex, + qdev->small_buf_q_producer_index); + } + + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs.rspQConsumerIndex, + qdev->rsp_consumer_index); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + if (unlikely(netif_queue_stopped(qdev->ndev))) { + if (netif_queue_stopped(qdev->ndev) && + (atomic_read(&qdev->tx_count) > (NUM_REQ_Q_ENTRIES / 4))) + netif_wake_queue(qdev->ndev); + } + + return *tx_cleaned + *rx_cleaned; +} + +static int ql_poll(struct net_device *ndev, int *budget) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + int work_to_do = min(*budget, ndev->quota); + int rx_cleaned = 0, tx_cleaned = 0; + + if (!netif_carrier_ok(ndev)) + goto quit_polling; + + ql_tx_rx_clean(qdev, &tx_cleaned, &rx_cleaned, work_to_do); + *budget -= rx_cleaned; + ndev->quota -= rx_cleaned; + + if ((!tx_cleaned && !rx_cleaned) || !netif_running(ndev)) { +quit_polling: + netif_rx_complete(ndev); + ql_enable_interrupts(qdev); + return 0; + } + return 1; +} + +static irqreturn_t ql3xxx_isr(int irq, void *dev_id, struct pt_regs *regs) +{ + + struct net_device *ndev = dev_id; + struct ql3_adapter *qdev = netdev_priv(ndev); + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + u32 value; + int handled = 1; + u32 var; + + port_regs = qdev->mem_map_registers; + + value = + ql_read_common_reg_l(qdev, &port_regs->CommonRegs.ispControlStatus); + + if (value & (ISP_CONTROL_FE | ISP_CONTROL_RI)) { + spin_lock(&qdev->adapter_lock); + netif_stop_queue(qdev->ndev); + netif_carrier_off(qdev->ndev); + ql_disable_interrupts(qdev); + qdev->port_link_state = LS_DOWN; + set_bit(QL_RESET_ACTIVE,&qdev->flags) ; + + if (value & ISP_CONTROL_FE) { + /* + * Chip Fatal Error. + */ + var = + ql_read_page0_reg_l(qdev, + &port_regs->PortFatalErrStatus); + printk(KERN_WARNING PFX + "%s: Resetting chip. PortFatalErrStatus " + "register = 0x%x\n", ndev->name, var); + set_bit(QL_RESET_START,&qdev->flags) ; + } else { + /* + * Soft Reset Requested. + */ + set_bit(QL_RESET_PER_SCSI,&qdev->flags) ; + printk(KERN_ERR PFX + "%s: Another function issued a reset to the " + "chip. ISR value = %x.\n", ndev->name, value); + } + queue_work(qdev->workqueue, &qdev->reset_work); + spin_unlock(&qdev->adapter_lock); + } else if (value & ISP_IMR_DISABLE_CMPL_INT) { + ql_disable_interrupts(qdev); + if (likely(netif_rx_schedule_prep(ndev))) + __netif_rx_schedule(ndev); + else + ql_enable_interrupts(qdev); + } else { + return IRQ_NONE; + } + + return IRQ_RETVAL(handled); +} + +static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev) +{ + struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev); + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + struct ql_tx_buf_cb *tx_cb; + struct ob_mac_iocb_req *mac_iocb_ptr; + u64 map; + + if (unlikely(atomic_read(&qdev->tx_count) < 2)) { + if (!netif_queue_stopped(ndev)) + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; + } + tx_cb = &qdev->tx_buf[qdev->req_producer_index] ; + mac_iocb_ptr = tx_cb->queue_entry; + memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req)); + mac_iocb_ptr->opcode = qdev->mac_ob_opcode; + mac_iocb_ptr->flags |= qdev->mb_bit_mask; + mac_iocb_ptr->transaction_id = qdev->req_producer_index; + mac_iocb_ptr->data_len = cpu_to_le16((u16) skb->len); + tx_cb->skb = skb; + map = pci_map_single(qdev->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + mac_iocb_ptr->buf_addr0_low = cpu_to_le32(LS_64BITS(map)); + mac_iocb_ptr->buf_addr0_high = cpu_to_le32(MS_64BITS(map)); + mac_iocb_ptr->buf_0_len = cpu_to_le32(skb->len | OB_MAC_IOCB_REQ_E); + pci_unmap_addr_set(tx_cb, mapaddr, map); + pci_unmap_len_set(tx_cb, maplen, skb->len); + atomic_dec(&qdev->tx_count); + + qdev->req_producer_index++; + if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES) + qdev->req_producer_index = 0; + wmb(); + ql_write_common_reg_l(qdev, + (u32 *) & port_regs->CommonRegs.reqQProducerIndex, + qdev->req_producer_index); + + ndev->trans_start = jiffies; + if (netif_msg_tx_queued(qdev)) + printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n", + ndev->name, qdev->req_producer_index, skb->len); + + return NETDEV_TX_OK; +} +static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev) +{ + qdev->req_q_size = + (u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req)); + + qdev->req_q_virt_addr = + pci_alloc_consistent(qdev->pdev, + (size_t) qdev->req_q_size, + &qdev->req_q_phy_addr); + + if ((qdev->req_q_virt_addr == NULL) || + LS_64BITS(qdev->req_q_phy_addr) & (qdev->req_q_size - 1)) { + printk(KERN_ERR PFX "%s: reqQ failed.\n", + qdev->ndev->name); + return -ENOMEM; + } + + qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb); + + qdev->rsp_q_virt_addr = + pci_alloc_consistent(qdev->pdev, + (size_t) qdev->rsp_q_size, + &qdev->rsp_q_phy_addr); + + if ((qdev->rsp_q_virt_addr == NULL) || + LS_64BITS(qdev->rsp_q_phy_addr) & (qdev->rsp_q_size - 1)) { + printk(KERN_ERR PFX + "%s: rspQ allocation failed\n", + qdev->ndev->name); + pci_free_consistent(qdev->pdev, (size_t) qdev->req_q_size, + qdev->req_q_virt_addr, + qdev->req_q_phy_addr); + return -ENOMEM; + } + + set_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags); + + return 0; +} + +static void ql_free_net_req_rsp_queues(struct ql3_adapter *qdev) +{ + if (!test_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags)) { + printk(KERN_INFO PFX + "%s: Already done.\n", qdev->ndev->name); + return; + } + + pci_free_consistent(qdev->pdev, + qdev->req_q_size, + qdev->req_q_virt_addr, qdev->req_q_phy_addr); + + qdev->req_q_virt_addr = NULL; + + pci_free_consistent(qdev->pdev, + qdev->rsp_q_size, + qdev->rsp_q_virt_addr, qdev->rsp_q_phy_addr); + + qdev->rsp_q_virt_addr = NULL; + + clear_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags); +} + +static int ql_alloc_buffer_queues(struct ql3_adapter *qdev) +{ + /* Create Large Buffer Queue */ + qdev->lrg_buf_q_size = + NUM_LBUFQ_ENTRIES * sizeof(struct lrg_buf_q_entry); + if (qdev->lrg_buf_q_size < PAGE_SIZE) + qdev->lrg_buf_q_alloc_size = PAGE_SIZE; + else + qdev->lrg_buf_q_alloc_size = qdev->lrg_buf_q_size * 2; + + qdev->lrg_buf_q_alloc_virt_addr = + pci_alloc_consistent(qdev->pdev, + qdev->lrg_buf_q_alloc_size, + &qdev->lrg_buf_q_alloc_phy_addr); + + if (qdev->lrg_buf_q_alloc_virt_addr == NULL) { + printk(KERN_ERR PFX + "%s: lBufQ failed\n", qdev->ndev->name); + return -ENOMEM; + } + qdev->lrg_buf_q_virt_addr = qdev->lrg_buf_q_alloc_virt_addr; + qdev->lrg_buf_q_phy_addr = qdev->lrg_buf_q_alloc_phy_addr; + + /* Create Small Buffer Queue */ + qdev->small_buf_q_size = + NUM_SBUFQ_ENTRIES * sizeof(struct lrg_buf_q_entry); + if (qdev->small_buf_q_size < PAGE_SIZE) + qdev->small_buf_q_alloc_size = PAGE_SIZE; + else + qdev->small_buf_q_alloc_size = qdev->small_buf_q_size * 2; + + qdev->small_buf_q_alloc_virt_addr = + pci_alloc_consistent(qdev->pdev, + qdev->small_buf_q_alloc_size, + &qdev->small_buf_q_alloc_phy_addr); + + if (qdev->small_buf_q_alloc_virt_addr == NULL) { + printk(KERN_ERR PFX + "%s: Small Buffer Queue allocation failed.\n", + qdev->ndev->name); + pci_free_consistent(qdev->pdev, qdev->lrg_buf_q_alloc_size, + qdev->lrg_buf_q_alloc_virt_addr, + qdev->lrg_buf_q_alloc_phy_addr); + return -ENOMEM; + } + + qdev->small_buf_q_virt_addr = qdev->small_buf_q_alloc_virt_addr; + qdev->small_buf_q_phy_addr = qdev->small_buf_q_alloc_phy_addr; + set_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags); + return 0; +} + +static void ql_free_buffer_queues(struct ql3_adapter *qdev) +{ + if (!test_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags)) { + printk(KERN_INFO PFX + "%s: Already done.\n", qdev->ndev->name); + return; + } + + pci_free_consistent(qdev->pdev, + qdev->lrg_buf_q_alloc_size, + qdev->lrg_buf_q_alloc_virt_addr, + qdev->lrg_buf_q_alloc_phy_addr); + + qdev->lrg_buf_q_virt_addr = NULL; + + pci_free_consistent(qdev->pdev, + qdev->small_buf_q_alloc_size, + qdev->small_buf_q_alloc_virt_addr, + qdev->small_buf_q_alloc_phy_addr); + + qdev->small_buf_q_virt_addr = NULL; + + clear_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags); +} + +static int ql_alloc_small_buffers(struct ql3_adapter *qdev) +{ + int i; + struct bufq_addr_element *small_buf_q_entry; + + /* Currently we allocate on one of memory and use it for smallbuffers */ + qdev->small_buf_total_size = + (QL_ADDR_ELE_PER_BUFQ_ENTRY * NUM_SBUFQ_ENTRIES * + QL_SMALL_BUFFER_SIZE); + + qdev->small_buf_virt_addr = + pci_alloc_consistent(qdev->pdev, + qdev->small_buf_total_size, + &qdev->small_buf_phy_addr); + + if (qdev->small_buf_virt_addr == NULL) { + printk(KERN_ERR PFX + "%s: Failed to get small buffer memory.\n", + qdev->ndev->name); + return -ENOMEM; + } + + qdev->small_buf_phy_addr_low = LS_64BITS(qdev->small_buf_phy_addr); + qdev->small_buf_phy_addr_high = MS_64BITS(qdev->small_buf_phy_addr); + + small_buf_q_entry = qdev->small_buf_q_virt_addr; + + qdev->last_rsp_offset = qdev->small_buf_phy_addr_low; + + /* Initialize the small buffer queue. */ + for (i = 0; i < (QL_ADDR_ELE_PER_BUFQ_ENTRY * NUM_SBUFQ_ENTRIES); i++) { + small_buf_q_entry->addr_high = + cpu_to_le32(qdev->small_buf_phy_addr_high); + small_buf_q_entry->addr_low = + cpu_to_le32(qdev->small_buf_phy_addr_low + + (i * QL_SMALL_BUFFER_SIZE)); + small_buf_q_entry++; + } + qdev->small_buf_index = 0; + set_bit(QL_ALLOC_SMALL_BUF_DONE,&qdev->flags); + return 0; +} + +static void ql_free_small_buffers(struct ql3_adapter *qdev) +{ + if (!test_bit(QL_ALLOC_SMALL_BUF_DONE,&qdev->flags)) { + printk(KERN_INFO PFX + "%s: Already done.\n", qdev->ndev->name); + return; + } + if (qdev->small_buf_virt_addr != NULL) { + pci_free_consistent(qdev->pdev, + qdev->small_buf_total_size, + qdev->small_buf_virt_addr, + qdev->small_buf_phy_addr); + + qdev->small_buf_virt_addr = NULL; + } +} + +static void ql_free_large_buffers(struct ql3_adapter *qdev) +{ + int i = 0; + struct ql_rcv_buf_cb *lrg_buf_cb; + + for (i = 0; i < NUM_LARGE_BUFFERS; i++) { + lrg_buf_cb = &qdev->lrg_buf[i]; + if (lrg_buf_cb->skb) { + dev_kfree_skb(lrg_buf_cb->skb); + pci_unmap_single(qdev->pdev, + pci_unmap_addr(lrg_buf_cb, mapaddr), + pci_unmap_len(lrg_buf_cb, maplen), + PCI_DMA_FROMDEVICE); + memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb)); + } else { + break; + } + } +} + +static void ql_init_large_buffers(struct ql3_adapter *qdev) +{ + int i; + struct ql_rcv_buf_cb *lrg_buf_cb; + struct bufq_addr_element *buf_addr_ele = qdev->lrg_buf_q_virt_addr; + + for (i = 0; i < NUM_LARGE_BUFFERS; i++) { + lrg_buf_cb = &qdev->lrg_buf[i]; + buf_addr_ele->addr_high = lrg_buf_cb->buf_phy_addr_high; + buf_addr_ele->addr_low = lrg_buf_cb->buf_phy_addr_low; + buf_addr_ele++; + } + qdev->lrg_buf_index = 0; + qdev->lrg_buf_skb_check = 0; +} + +static int ql_alloc_large_buffers(struct ql3_adapter *qdev) +{ + int i; + struct ql_rcv_buf_cb *lrg_buf_cb; + struct sk_buff *skb; + u64 map; + + for (i = 0; i < NUM_LARGE_BUFFERS; i++) { + skb = dev_alloc_skb(qdev->lrg_buffer_len); + if (unlikely(!skb)) { + /* Better luck next round */ + printk(KERN_ERR PFX + "%s: large buff alloc failed, " + "for %d bytes at index %d.\n", + qdev->ndev->name, + qdev->lrg_buffer_len * 2, i); + ql_free_large_buffers(qdev); + return -ENOMEM; + } else { + + lrg_buf_cb = &qdev->lrg_buf[i]; + memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb)); + lrg_buf_cb->index = i; + lrg_buf_cb->skb = skb; + /* + * We save some space to copy the ethhdr from first + * buffer + */ + skb_reserve(skb, QL_HEADER_SPACE); + map = pci_map_single(qdev->pdev, + skb->data, + qdev->lrg_buffer_len - + QL_HEADER_SPACE, + PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(lrg_buf_cb, mapaddr, map); + pci_unmap_len_set(lrg_buf_cb, maplen, + qdev->lrg_buffer_len - + QL_HEADER_SPACE); + lrg_buf_cb->buf_phy_addr_low = + cpu_to_le32(LS_64BITS(map)); + lrg_buf_cb->buf_phy_addr_high = + cpu_to_le32(MS_64BITS(map)); + } + } + return 0; +} + +static void ql_create_send_free_list(struct ql3_adapter *qdev) +{ + struct ql_tx_buf_cb *tx_cb; + int i; + struct ob_mac_iocb_req *req_q_curr = + qdev->req_q_virt_addr; + + /* Create free list of transmit buffers */ + for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) { + tx_cb = &qdev->tx_buf[i]; + tx_cb->skb = NULL; + tx_cb->queue_entry = req_q_curr; + req_q_curr++; + } +} + +static int ql_alloc_mem_resources(struct ql3_adapter *qdev) +{ + if (qdev->ndev->mtu == NORMAL_MTU_SIZE) + qdev->lrg_buffer_len = NORMAL_MTU_SIZE; + else if (qdev->ndev->mtu == JUMBO_MTU_SIZE) { + qdev->lrg_buffer_len = JUMBO_MTU_SIZE; + } else { + printk(KERN_ERR PFX + "%s: Invalid mtu size. Only 1500 and 9000 are accepted.\n", + qdev->ndev->name); + return -ENOMEM; + } + qdev->lrg_buffer_len += VLAN_ETH_HLEN + VLAN_ID_LEN + QL_HEADER_SPACE; + qdev->max_frame_size = + (qdev->lrg_buffer_len - QL_HEADER_SPACE) + ETHERNET_CRC_SIZE; + + /* + * First allocate a page of shared memory and use it for shadow + * locations of Network Request Queue Consumer Address Register and + * Network Completion Queue Producer Index Register + */ + qdev->shadow_reg_virt_addr = + pci_alloc_consistent(qdev->pdev, + PAGE_SIZE, &qdev->shadow_reg_phy_addr); + + if (qdev->shadow_reg_virt_addr != NULL) { + qdev->preq_consumer_index = (u16 *) qdev->shadow_reg_virt_addr; + qdev->req_consumer_index_phy_addr_high = + MS_64BITS(qdev->shadow_reg_phy_addr); + qdev->req_consumer_index_phy_addr_low = + LS_64BITS(qdev->shadow_reg_phy_addr); + + qdev->prsp_producer_index = + (u32 *) (((u8 *) qdev->preq_consumer_index) + 8); + qdev->rsp_producer_index_phy_addr_high = + qdev->req_consumer_index_phy_addr_high; + qdev->rsp_producer_index_phy_addr_low = + qdev->req_consumer_index_phy_addr_low + 8; + } else { + printk(KERN_ERR PFX + "%s: shadowReg Alloc failed.\n", qdev->ndev->name); + return -ENOMEM; + } + + if (ql_alloc_net_req_rsp_queues(qdev) != 0) { + printk(KERN_ERR PFX + "%s: ql_alloc_net_req_rsp_queues failed.\n", + qdev->ndev->name); + goto err_req_rsp; + } + + if (ql_alloc_buffer_queues(qdev) != 0) { + printk(KERN_ERR PFX + "%s: ql_alloc_buffer_queues failed.\n", + qdev->ndev->name); + goto err_buffer_queues; + } + + if (ql_alloc_small_buffers(qdev) != 0) { + printk(KERN_ERR PFX + "%s: ql_alloc_small_buffers failed\n", qdev->ndev->name); + goto err_small_buffers; + } + + if (ql_alloc_large_buffers(qdev) != 0) { + printk(KERN_ERR PFX + "%s: ql_alloc_large_buffers failed\n", qdev->ndev->name); + goto err_small_buffers; + } + + /* Initialize the large buffer queue. */ + ql_init_large_buffers(qdev); + ql_create_send_free_list(qdev); + + qdev->rsp_current = qdev->rsp_q_virt_addr; + + return 0; + +err_small_buffers: + ql_free_buffer_queues(qdev); +err_buffer_queues: + ql_free_net_req_rsp_queues(qdev); +err_req_rsp: + pci_free_consistent(qdev->pdev, + PAGE_SIZE, + qdev->shadow_reg_virt_addr, + qdev->shadow_reg_phy_addr); + + return -ENOMEM; +} + +static void ql_free_mem_resources(struct ql3_adapter *qdev) +{ + ql_free_large_buffers(qdev); + ql_free_small_buffers(qdev); + ql_free_buffer_queues(qdev); + ql_free_net_req_rsp_queues(qdev); + if (qdev->shadow_reg_virt_addr != NULL) { + pci_free_consistent(qdev->pdev, + PAGE_SIZE, + qdev->shadow_reg_virt_addr, + qdev->shadow_reg_phy_addr); + qdev->shadow_reg_virt_addr = NULL; + } +} + +static int ql_init_misc_registers(struct ql3_adapter *qdev) +{ + struct ql3xxx_local_ram_registers *local_ram = + (struct ql3xxx_local_ram_registers *)qdev->mem_map_registers; + + if(ql_sem_spinlock(qdev, QL_DDR_RAM_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 4)) + return -1; + + ql_write_page2_reg(qdev, + &local_ram->bufletSize, qdev->nvram_data.bufletSize); + + ql_write_page2_reg(qdev, + &local_ram->maxBufletCount, + qdev->nvram_data.bufletCount); + + ql_write_page2_reg(qdev, + &local_ram->freeBufletThresholdLow, + (qdev->nvram_data.tcpWindowThreshold25 << 16) | + (qdev->nvram_data.tcpWindowThreshold0)); + + ql_write_page2_reg(qdev, + &local_ram->freeBufletThresholdHigh, + qdev->nvram_data.tcpWindowThreshold50); + + ql_write_page2_reg(qdev, + &local_ram->ipHashTableBase, + (qdev->nvram_data.ipHashTableBaseHi << 16) | + qdev->nvram_data.ipHashTableBaseLo); + ql_write_page2_reg(qdev, + &local_ram->ipHashTableCount, + qdev->nvram_data.ipHashTableSize); + ql_write_page2_reg(qdev, + &local_ram->tcpHashTableBase, + (qdev->nvram_data.tcpHashTableBaseHi << 16) | + qdev->nvram_data.tcpHashTableBaseLo); + ql_write_page2_reg(qdev, + &local_ram->tcpHashTableCount, + qdev->nvram_data.tcpHashTableSize); + ql_write_page2_reg(qdev, + &local_ram->ncbBase, + (qdev->nvram_data.ncbTableBaseHi << 16) | + qdev->nvram_data.ncbTableBaseLo); + ql_write_page2_reg(qdev, + &local_ram->maxNcbCount, + qdev->nvram_data.ncbTableSize); + ql_write_page2_reg(qdev, + &local_ram->drbBase, + (qdev->nvram_data.drbTableBaseHi << 16) | + qdev->nvram_data.drbTableBaseLo); + ql_write_page2_reg(qdev, + &local_ram->maxDrbCount, + qdev->nvram_data.drbTableSize); + ql_sem_unlock(qdev, QL_DDR_RAM_SEM_MASK); + return 0; +} + +static int ql_adapter_initialize(struct ql3_adapter *qdev) +{ + u32 value; + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + struct ql3xxx_host_memory_registers __iomem *hmem_regs = + (struct ql3xxx_host_memory_registers *)port_regs; + u32 delay = 10; + int status = 0; + + if(ql_mii_setup(qdev)) + return -1; + + /* Bring out PHY out of reset */ + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + (ISP_SERIAL_PORT_IF_WE | + (ISP_SERIAL_PORT_IF_WE << 16))); + + qdev->port_link_state = LS_DOWN; + netif_carrier_off(qdev->ndev); + + /* V2 chip fix for ARS-39168. */ + ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, + (ISP_SERIAL_PORT_IF_SDE | + (ISP_SERIAL_PORT_IF_SDE << 16))); + + /* Request Queue Registers */ + *((u32 *) (qdev->preq_consumer_index)) = 0; + atomic_set(&qdev->tx_count,NUM_REQ_Q_ENTRIES); + qdev->req_producer_index = 0; + + ql_write_page1_reg(qdev, + &hmem_regs->reqConsumerIndexAddrHigh, + qdev->req_consumer_index_phy_addr_high); + ql_write_page1_reg(qdev, + &hmem_regs->reqConsumerIndexAddrLow, + qdev->req_consumer_index_phy_addr_low); + + ql_write_page1_reg(qdev, + &hmem_regs->reqBaseAddrHigh, + MS_64BITS(qdev->req_q_phy_addr)); + ql_write_page1_reg(qdev, + &hmem_regs->reqBaseAddrLow, + LS_64BITS(qdev->req_q_phy_addr)); + ql_write_page1_reg(qdev, &hmem_regs->reqLength, NUM_REQ_Q_ENTRIES); + + /* Response Queue Registers */ + *((u16 *) (qdev->prsp_producer_index)) = 0; + qdev->rsp_consumer_index = 0; + qdev->rsp_current = qdev->rsp_q_virt_addr; + + ql_write_page1_reg(qdev, + &hmem_regs->rspProducerIndexAddrHigh, + qdev->rsp_producer_index_phy_addr_high); + + ql_write_page1_reg(qdev, + &hmem_regs->rspProducerIndexAddrLow, + qdev->rsp_producer_index_phy_addr_low); + + ql_write_page1_reg(qdev, + &hmem_regs->rspBaseAddrHigh, + MS_64BITS(qdev->rsp_q_phy_addr)); + + ql_write_page1_reg(qdev, + &hmem_regs->rspBaseAddrLow, + LS_64BITS(qdev->rsp_q_phy_addr)); + + ql_write_page1_reg(qdev, &hmem_regs->rspLength, NUM_RSP_Q_ENTRIES); + + /* Large Buffer Queue */ + ql_write_page1_reg(qdev, + &hmem_regs->rxLargeQBaseAddrHigh, + MS_64BITS(qdev->lrg_buf_q_phy_addr)); + + ql_write_page1_reg(qdev, + &hmem_regs->rxLargeQBaseAddrLow, + LS_64BITS(qdev->lrg_buf_q_phy_addr)); + + ql_write_page1_reg(qdev, &hmem_regs->rxLargeQLength, NUM_LBUFQ_ENTRIES); + + ql_write_page1_reg(qdev, + &hmem_regs->rxLargeBufferLength, + qdev->lrg_buffer_len); + + /* Small Buffer Queue */ + ql_write_page1_reg(qdev, + &hmem_regs->rxSmallQBaseAddrHigh, + MS_64BITS(qdev->small_buf_q_phy_addr)); + + ql_write_page1_reg(qdev, + &hmem_regs->rxSmallQBaseAddrLow, + LS_64BITS(qdev->small_buf_q_phy_addr)); + + ql_write_page1_reg(qdev, &hmem_regs->rxSmallQLength, NUM_SBUFQ_ENTRIES); + ql_write_page1_reg(qdev, + &hmem_regs->rxSmallBufferLength, + QL_SMALL_BUFFER_SIZE); + + qdev->small_buf_q_producer_index = NUM_SBUFQ_ENTRIES - 1; + qdev->small_buf_release_cnt = 8; + qdev->lrg_buf_q_producer_index = NUM_LBUFQ_ENTRIES - 1; + qdev->lrg_buf_release_cnt = 8; + qdev->lrg_buf_next_free = + (struct bufq_addr_element *)qdev->lrg_buf_q_virt_addr; + qdev->small_buf_index = 0; + qdev->lrg_buf_index = 0; + qdev->lrg_buf_free_count = 0; + qdev->lrg_buf_free_head = NULL; + qdev->lrg_buf_free_tail = NULL; + + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs. + rxSmallQProducerIndex, + qdev->small_buf_q_producer_index); + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs. + rxLargeQProducerIndex, + qdev->lrg_buf_q_producer_index); + + /* + * Find out if the chip has already been initialized. If it has, then + * we skip some of the initialization. + */ + clear_bit(QL_LINK_MASTER, &qdev->flags); + value = ql_read_page0_reg(qdev, &port_regs->portStatus); + if ((value & PORT_STATUS_IC) == 0) { + + /* Chip has not been configured yet, so let it rip. */ + if(ql_init_misc_registers(qdev)) { + status = -1; + goto out; + } + + if (qdev->mac_index) + ql_write_page0_reg(qdev, + &port_regs->mac1MaxFrameLengthReg, + qdev->max_frame_size); + else + ql_write_page0_reg(qdev, + &port_regs->mac0MaxFrameLengthReg, + qdev->max_frame_size); + + value = qdev->nvram_data.tcpMaxWindowSize; + ql_write_page0_reg(qdev, &port_regs->tcpMaxWindow, value); + + value = (0xFFFF << 16) | qdev->nvram_data.extHwConfig; + + if(ql_sem_spinlock(qdev, QL_FLASH_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) + * 2) << 13)) { + status = -1; + goto out; + } + ql_write_page0_reg(qdev, &port_regs->ExternalHWConfig, value); + ql_write_page0_reg(qdev, &port_regs->InternalChipConfig, + (((INTERNAL_CHIP_SD | INTERNAL_CHIP_WE) << + 16) | (INTERNAL_CHIP_SD | + INTERNAL_CHIP_WE))); + ql_sem_unlock(qdev, QL_FLASH_SEM_MASK); + } + + + if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK, + (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) * + 2) << 7)) { + status = -1; + goto out; + } + + ql_init_scan_mode(qdev); + ql_get_phy_owner(qdev); + + /* Load the MAC Configuration */ + + /* Program lower 32 bits of the MAC address */ + ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg, + (MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16)); + ql_write_page0_reg(qdev, &port_regs->macAddrDataReg, + ((qdev->ndev->dev_addr[2] << 24) + | (qdev->ndev->dev_addr[3] << 16) + | (qdev->ndev->dev_addr[4] << 8) + | qdev->ndev->dev_addr[5])); + + /* Program top 16 bits of the MAC address */ + ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg, + ((MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16) | 1)); + ql_write_page0_reg(qdev, &port_regs->macAddrDataReg, + ((qdev->ndev->dev_addr[0] << 8) + | qdev->ndev->dev_addr[1])); + + /* Enable Primary MAC */ + ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg, + ((MAC_ADDR_INDIRECT_PTR_REG_PE << 16) | + MAC_ADDR_INDIRECT_PTR_REG_PE)); + + /* Clear Primary and Secondary IP addresses */ + ql_write_page0_reg(qdev, &port_regs->ipAddrIndexReg, + ((IP_ADDR_INDEX_REG_MASK << 16) | + (qdev->mac_index << 2))); + ql_write_page0_reg(qdev, &port_regs->ipAddrDataReg, 0); + + ql_write_page0_reg(qdev, &port_regs->ipAddrIndexReg, + ((IP_ADDR_INDEX_REG_MASK << 16) | + ((qdev->mac_index << 2) + 1))); + ql_write_page0_reg(qdev, &port_regs->ipAddrDataReg, 0); + + ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK); + + /* Indicate Configuration Complete */ + ql_write_page0_reg(qdev, + &port_regs->portControl, + ((PORT_CONTROL_CC << 16) | PORT_CONTROL_CC)); + + do { + value = ql_read_page0_reg(qdev, &port_regs->portStatus); + if (value & PORT_STATUS_IC) + break; + msleep(500); + } while (--delay); + + if (delay == 0) { + printk(KERN_ERR PFX + "%s: Hw Initialization timeout.\n", qdev->ndev->name); + status = -1; + goto out; + } + + /* Enable Ethernet Function */ + value = + (PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI | + PORT_CONTROL_HH); + ql_write_page0_reg(qdev, &port_regs->portControl, + ((value << 16) | value)); + +out: + return status; +} + +/* + * Caller holds hw_lock. + */ +static int ql_adapter_reset(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + int status = 0; + u16 value; + int max_wait_time; + + set_bit(QL_RESET_ACTIVE, &qdev->flags); + clear_bit(QL_RESET_DONE, &qdev->flags); + + /* + * Issue soft reset to chip. + */ + printk(KERN_DEBUG PFX + "%s: Issue soft reset to chip.\n", + qdev->ndev->name); + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs.ispControlStatus, + ((ISP_CONTROL_SR << 16) | ISP_CONTROL_SR)); + + /* Wait 3 seconds for reset to complete. */ + printk(KERN_DEBUG PFX + "%s: Wait 10 milliseconds for reset to complete.\n", + qdev->ndev->name); + + /* Wait until the firmware tells us the Soft Reset is done */ + max_wait_time = 5; + do { + value = + ql_read_common_reg(qdev, + &port_regs->CommonRegs.ispControlStatus); + if ((value & ISP_CONTROL_SR) == 0) + break; + + ssleep(1); + } while ((--max_wait_time)); + + /* + * Also, make sure that the Network Reset Interrupt bit has been + * cleared after the soft reset has taken place. + */ + value = + ql_read_common_reg(qdev, &port_regs->CommonRegs.ispControlStatus); + if (value & ISP_CONTROL_RI) { + printk(KERN_DEBUG PFX + "ql_adapter_reset: clearing RI after reset.\n"); + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs. + ispControlStatus, + ((ISP_CONTROL_RI << 16) | ISP_CONTROL_RI)); + } + + if (max_wait_time == 0) { + /* Issue Force Soft Reset */ + ql_write_common_reg(qdev, + (u32 *) & port_regs->CommonRegs. + ispControlStatus, + ((ISP_CONTROL_FSR << 16) | + ISP_CONTROL_FSR)); + /* + * Wait until the firmware tells us the Force Soft Reset is + * done + */ + max_wait_time = 5; + do { + value = + ql_read_common_reg(qdev, + &port_regs->CommonRegs. + ispControlStatus); + if ((value & ISP_CONTROL_FSR) == 0) { + break; + } + ssleep(1); + } while ((--max_wait_time)); + } + if (max_wait_time == 0) + status = 1; + + clear_bit(QL_RESET_ACTIVE, &qdev->flags); + set_bit(QL_RESET_DONE, &qdev->flags); + return status; +} + +static void ql_set_mac_info(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + u32 value, port_status; + u8 func_number; + + /* Get the function number */ + value = + ql_read_common_reg_l(qdev, &port_regs->CommonRegs.ispControlStatus); + func_number = (u8) ((value >> 4) & OPCODE_FUNC_ID_MASK); + port_status = ql_read_page0_reg(qdev, &port_regs->portStatus); + switch (value & ISP_CONTROL_FN_MASK) { + case ISP_CONTROL_FN0_NET: + qdev->mac_index = 0; + qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number; + qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number; + qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number; + qdev->mb_bit_mask = FN0_MA_BITS_MASK; + qdev->PHYAddr = PORT0_PHY_ADDRESS; + if (port_status & PORT_STATUS_SM0) + set_bit(QL_LINK_OPTICAL,&qdev->flags); + else + clear_bit(QL_LINK_OPTICAL,&qdev->flags); + break; + + case ISP_CONTROL_FN1_NET: + qdev->mac_index = 1; + qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number; + qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number; + qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number; + qdev->mb_bit_mask = FN1_MA_BITS_MASK; + qdev->PHYAddr = PORT1_PHY_ADDRESS; + if (port_status & PORT_STATUS_SM1) + set_bit(QL_LINK_OPTICAL,&qdev->flags); + else + clear_bit(QL_LINK_OPTICAL,&qdev->flags); + break; + + case ISP_CONTROL_FN0_SCSI: + case ISP_CONTROL_FN1_SCSI: + default: + printk(KERN_DEBUG PFX + "%s: Invalid function number, ispControlStatus = 0x%x\n", + qdev->ndev->name,value); + break; + } + qdev->numPorts = qdev->nvram_data.numPorts; +} + +static void ql_display_dev_info(struct net_device *ndev) +{ + struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev); + struct pci_dev *pdev = qdev->pdev; + + printk(KERN_INFO PFX + "\n%s Adapter %d RevisionID %d found on PCI slot %d.\n", + DRV_NAME, qdev->index, qdev->chip_rev_id, qdev->pci_slot); + printk(KERN_INFO PFX + "%s Interface.\n", + test_bit(QL_LINK_OPTICAL,&qdev->flags) ? "OPTICAL" : "COPPER"); + + /* + * Print PCI bus width/type. + */ + printk(KERN_INFO PFX + "Bus interface is %s %s.\n", + ((qdev->pci_width == 64) ? "64-bit" : "32-bit"), + ((qdev->pci_x) ? "PCI-X" : "PCI")); + + printk(KERN_INFO PFX + "mem IO base address adjusted = 0x%p\n", + qdev->mem_map_registers); + printk(KERN_INFO PFX "Interrupt number = %d\n", pdev->irq); + + if (netif_msg_probe(qdev)) + printk(KERN_INFO PFX + "%s: MAC address %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, ndev->dev_addr[0], ndev->dev_addr[1], + ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], + ndev->dev_addr[5]); +} + +static int ql_adapter_down(struct ql3_adapter *qdev, int do_reset) +{ + struct net_device *ndev = qdev->ndev; + int retval = 0; + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + clear_bit(QL_ADAPTER_UP,&qdev->flags); + clear_bit(QL_LINK_MASTER,&qdev->flags); + + ql_disable_interrupts(qdev); + + free_irq(qdev->pdev->irq, ndev); + + if (qdev->msi && test_bit(QL_MSI_ENABLED,&qdev->flags)) { + printk(KERN_INFO PFX + "%s: calling pci_disable_msi().\n", qdev->ndev->name); + clear_bit(QL_MSI_ENABLED,&qdev->flags); + pci_disable_msi(qdev->pdev); + } + + del_timer_sync(&qdev->adapter_timer); + + netif_poll_disable(ndev); + + if (do_reset) { + int soft_reset; + unsigned long hw_flags; + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + if (ql_wait_for_drvr_lock(qdev)) { + if ((soft_reset = ql_adapter_reset(qdev))) { + printk(KERN_ERR PFX + "%s: ql_adapter_reset(%d) FAILED!\n", + ndev->name, qdev->index); + } + printk(KERN_ERR PFX + "%s: Releaseing driver lock via chip reset.\n",ndev->name); + } else { + printk(KERN_ERR PFX + "%s: Could not acquire driver lock to do " + "reset!\n", ndev->name); + retval = -1; + } + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + } + ql_free_mem_resources(qdev); + return retval; +} + +static int ql_adapter_up(struct ql3_adapter *qdev) +{ + struct net_device *ndev = qdev->ndev; + int err; + unsigned long irq_flags = SA_SAMPLE_RANDOM | SA_SHIRQ; + unsigned long hw_flags; + + if (ql_alloc_mem_resources(qdev)) { + printk(KERN_ERR PFX + "%s Unable to allocate buffers.\n", ndev->name); + return -ENOMEM; + } + + if (qdev->msi) { + if (pci_enable_msi(qdev->pdev)) { + printk(KERN_ERR PFX + "%s: User requested MSI, but MSI failed to " + "initialize. Continuing without MSI.\n", + qdev->ndev->name); + qdev->msi = 0; + } else { + printk(KERN_INFO PFX "%s: MSI Enabled...\n", qdev->ndev->name); + set_bit(QL_MSI_ENABLED,&qdev->flags); + irq_flags &= ~SA_SHIRQ; + } + } + + if ((err = request_irq(qdev->pdev->irq, + ql3xxx_isr, + irq_flags, ndev->name, ndev))) { + printk(KERN_ERR PFX + "%s: Failed to reserve interrupt %d already in use.\n", + ndev->name, qdev->pdev->irq); + goto err_irq; + } + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + + if ((err = ql_wait_for_drvr_lock(qdev))) { + if ((err = ql_adapter_initialize(qdev))) { + printk(KERN_ERR PFX + "%s: Unable to initialize adapter.\n", + ndev->name); + goto err_init; + } + printk(KERN_ERR PFX + "%s: Releaseing driver lock.\n",ndev->name); + ql_sem_unlock(qdev, QL_DRVR_SEM_MASK); + } else { + printk(KERN_ERR PFX + "%s: Could not aquire driver lock.\n", + ndev->name); + goto err_lock; + } + + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + set_bit(QL_ADAPTER_UP,&qdev->flags); + + mod_timer(&qdev->adapter_timer, jiffies + HZ * 1); + + netif_poll_enable(ndev); + ql_enable_interrupts(qdev); + return 0; + +err_init: + ql_sem_unlock(qdev, QL_DRVR_SEM_MASK); +err_lock: + free_irq(qdev->pdev->irq, ndev); +err_irq: + if (qdev->msi && test_bit(QL_MSI_ENABLED,&qdev->flags)) { + printk(KERN_INFO PFX + "%s: calling pci_disable_msi().\n", + qdev->ndev->name); + clear_bit(QL_MSI_ENABLED,&qdev->flags); + pci_disable_msi(qdev->pdev); + } + return err; +} + +static int ql_cycle_adapter(struct ql3_adapter *qdev, int reset) +{ + if( ql_adapter_down(qdev,reset) || ql_adapter_up(qdev)) { + printk(KERN_ERR PFX + "%s: Driver up/down cycle failed, " + "closing device\n",qdev->ndev->name); + dev_close(qdev->ndev); + return -1; + } + return 0; +} + +static int ql3xxx_close(struct net_device *ndev) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + + /* + * Wait for device to recover from a reset. + * (Rarely happens, but possible.) + */ + while (!test_bit(QL_ADAPTER_UP,&qdev->flags)) + msleep(50); + + ql_adapter_down(qdev,QL_DO_RESET); + return 0; +} + +static int ql3xxx_open(struct net_device *ndev) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + return (ql_adapter_up(qdev)); +} + +static struct net_device_stats *ql3xxx_get_stats(struct net_device *dev) +{ + struct ql3_adapter *qdev = (struct ql3_adapter *)dev->priv; + return &qdev->stats; +} + +static int ql3xxx_change_mtu(struct net_device *ndev, int new_mtu) +{ + struct ql3_adapter *qdev = netdev_priv(ndev); + printk(KERN_ERR PFX "%s: new mtu size = %d.\n", ndev->name, new_mtu); + if (new_mtu != NORMAL_MTU_SIZE && new_mtu != JUMBO_MTU_SIZE) { + printk(KERN_ERR PFX + "%s: mtu size of %d is not valid. Use exactly %d or " + "%d.\n", ndev->name, new_mtu, NORMAL_MTU_SIZE, + JUMBO_MTU_SIZE); + return -EINVAL; + } + + if (!netif_running(ndev)) { + ndev->mtu = new_mtu; + return 0; + } + + ndev->mtu = new_mtu; + return ql_cycle_adapter(qdev,QL_DO_RESET); +} + +static void ql3xxx_set_multicast_list(struct net_device *ndev) +{ + /* + * We are manually parsing the list in the net_device structure. + */ + return; +} + +static int ql3xxx_set_mac_address(struct net_device *ndev, void *p) +{ + struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev); + struct ql3xxx_port_registers __iomem *port_regs = + qdev->mem_map_registers; + struct sockaddr *addr = p; + unsigned long hw_flags; + + if (netif_running(ndev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + /* Program lower 32 bits of the MAC address */ + ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg, + (MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16)); + ql_write_page0_reg(qdev, &port_regs->macAddrDataReg, + ((ndev->dev_addr[2] << 24) | (ndev-> + dev_addr[3] << 16) | + (ndev->dev_addr[4] << 8) | ndev->dev_addr[5])); + + /* Program top 16 bits of the MAC address */ + ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg, + ((MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16) | 1)); + ql_write_page0_reg(qdev, &port_regs->macAddrDataReg, + ((ndev->dev_addr[0] << 8) | ndev->dev_addr[1])); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + return 0; +} + +static void ql3xxx_tx_timeout(struct net_device *ndev) +{ + struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev); + + printk(KERN_ERR PFX "%s: Resetting...\n", ndev->name); + /* + * Stop the queues, we've got a problem. + */ + netif_stop_queue(ndev); + + /* + * Wake up the worker to process this event. + */ + queue_work(qdev->workqueue, &qdev->tx_timeout_work); +} + +static void ql_reset_work(struct ql3_adapter *qdev) +{ + struct net_device *ndev = qdev->ndev; + u32 value; + struct ql_tx_buf_cb *tx_cb; + int max_wait_time, i; + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + unsigned long hw_flags; + + if (test_bit((QL_RESET_PER_SCSI | QL_RESET_START),&qdev->flags)) { + clear_bit(QL_LINK_MASTER,&qdev->flags); + + /* + * Loop through the active list and return the skb. + */ + for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) { + tx_cb = &qdev->tx_buf[i]; + if (tx_cb->skb) { + + printk(KERN_DEBUG PFX + "%s: Freeing lost SKB.\n", + qdev->ndev->name); + pci_unmap_single(qdev->pdev, + pci_unmap_addr(tx_cb, mapaddr), + pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE); + dev_kfree_skb(tx_cb->skb); + tx_cb->skb = NULL; + } + } + + printk(KERN_ERR PFX + "%s: Clearing NRI after reset.\n", qdev->ndev->name); + spin_lock_irqsave(&qdev->hw_lock, hw_flags); + ql_write_common_reg(qdev, + &port_regs->CommonRegs. + ispControlStatus, + ((ISP_CONTROL_RI << 16) | ISP_CONTROL_RI)); + /* + * Wait the for Soft Reset to Complete. + */ + max_wait_time = 10; + do { + value = ql_read_common_reg(qdev, + &port_regs->CommonRegs. + + ispControlStatus); + if ((value & ISP_CONTROL_SR) == 0) { + printk(KERN_DEBUG PFX + "%s: reset completed.\n", + qdev->ndev->name); + break; + } + + if (value & ISP_CONTROL_RI) { + printk(KERN_DEBUG PFX + "%s: clearing NRI after reset.\n", + qdev->ndev->name); + ql_write_common_reg(qdev, + (u32 *) & + port_regs-> + CommonRegs. + ispControlStatus, + ((ISP_CONTROL_RI << + 16) | ISP_CONTROL_RI)); + } + + ssleep(1); + } while (--max_wait_time); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + if (value & ISP_CONTROL_SR) { + + /* + * Set the reset flags and clear the board again. + * Nothing else to do... + */ + printk(KERN_ERR PFX + "%s: Timed out waiting for reset to " + "complete.\n", ndev->name); + printk(KERN_ERR PFX + "%s: Do a reset.\n", ndev->name); + clear_bit(QL_RESET_PER_SCSI,&qdev->flags); + clear_bit(QL_RESET_START,&qdev->flags); + ql_cycle_adapter(qdev,QL_DO_RESET); + return; + } + + clear_bit(QL_RESET_ACTIVE,&qdev->flags); + clear_bit(QL_RESET_PER_SCSI,&qdev->flags); + clear_bit(QL_RESET_START,&qdev->flags); + ql_cycle_adapter(qdev,QL_NO_RESET); + } +} + +static void ql_tx_timeout_work(struct ql3_adapter *qdev) +{ + ql_cycle_adapter(qdev,QL_DO_RESET); +} + +static void ql_get_board_info(struct ql3_adapter *qdev) +{ + struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers; + u32 value; + + value = ql_read_page0_reg_l(qdev, &port_regs->portStatus); + + qdev->chip_rev_id = ((value & PORT_STATUS_REV_ID_MASK) >> 12); + if (value & PORT_STATUS_64) + qdev->pci_width = 64; + else + qdev->pci_width = 32; + if (value & PORT_STATUS_X) + qdev->pci_x = 1; + else + qdev->pci_x = 0; + qdev->pci_slot = (u8) PCI_SLOT(qdev->pdev->devfn); +} + +static void ql3xxx_timer(unsigned long ptr) +{ + struct ql3_adapter *qdev = (struct ql3_adapter *)ptr; + + if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) { + printk(KERN_DEBUG PFX + "%s: Reset in progress.\n", + qdev->ndev->name); + goto end; + } + + ql_link_state_machine(qdev); + + /* Restart timer on 2 second interval. */ +end: + mod_timer(&qdev->adapter_timer, jiffies + HZ * 1); +} + +static int __devinit ql3xxx_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_entry) +{ + struct net_device *ndev = NULL; + struct ql3_adapter *qdev = NULL; + static int cards_found = 0; + int pci_using_dac, err; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "%s cannot enable PCI device\n", + pci_name(pdev)); + goto err_out; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_out_disable_pdev; + } + + pci_set_master(pdev); + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + pci_using_dac = 1; + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + } else if (!(err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) { + pci_using_dac = 0; + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + } + + if (err) { + printk(KERN_ERR PFX "%s no usable DMA configuration\n", + pci_name(pdev)); + goto err_out_free_regions; + } + + ndev = alloc_etherdev(sizeof(struct ql3_adapter)); + if (!ndev) + goto err_out_free_regions; + + SET_MODULE_OWNER(ndev); + SET_NETDEV_DEV(ndev, &pdev->dev); + + ndev->features = NETIF_F_LLTX; + if (pci_using_dac) + ndev->features |= NETIF_F_HIGHDMA; + + pci_set_drvdata(pdev, ndev); + + qdev = netdev_priv(ndev); + qdev->index = cards_found; + qdev->ndev = ndev; + qdev->pdev = pdev; + qdev->port_link_state = LS_DOWN; + if (msi) + qdev->msi = 1; + + qdev->msg_enable = netif_msg_init(debug, default_msg); + + qdev->mem_map_registers = + ioremap_nocache(pci_resource_start(pdev, 1), + pci_resource_len(qdev->pdev, 1)); + if (!qdev->mem_map_registers) { + printk(KERN_ERR PFX "%s: cannot map device registers\n", + pci_name(pdev)); + goto err_out_free_ndev; + } + + spin_lock_init(&qdev->adapter_lock); + spin_lock_init(&qdev->hw_lock); + + /* Set driver entry points */ + ndev->open = ql3xxx_open; + ndev->hard_start_xmit = ql3xxx_send; + ndev->stop = ql3xxx_close; + ndev->get_stats = ql3xxx_get_stats; + ndev->change_mtu = ql3xxx_change_mtu; + ndev->set_multicast_list = ql3xxx_set_multicast_list; + SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops); + ndev->set_mac_address = ql3xxx_set_mac_address; + ndev->tx_timeout = ql3xxx_tx_timeout; + ndev->watchdog_timeo = 5 * HZ; + + ndev->poll = &ql_poll; + ndev->weight = 64; + + ndev->irq = pdev->irq; + + /* make sure the EEPROM is good */ + if (ql_get_nvram_params(qdev)) { + printk(KERN_ALERT PFX + "ql3xxx_probe: Adapter #%d, Invalid NVRAM parameters.\n", + qdev->index); + goto err_out_iounmap; + } + + ql_set_mac_info(qdev); + + /* Validate and set parameters */ + if (qdev->mac_index) { + memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn2.macAddress, + ETH_ALEN); + } else { + memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn0.macAddress, + ETH_ALEN); + } + memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); + + ndev->tx_queue_len = NUM_REQ_Q_ENTRIES; + + /* Turn off support for multicasting */ + ndev->flags &= ~IFF_MULTICAST; + + /* Record PCI bus information. */ + ql_get_board_info(qdev); + + /* + * Set the Maximum Memory Read Byte Count value. We do this to handle + * jumbo frames. + */ + if (qdev->pci_x) { + pci_write_config_word(pdev, (int)0x4e, (u16) 0x0036); + } + + err = register_netdev(ndev); + if (err) { + printk(KERN_ERR PFX "%s: cannot register net device\n", + pci_name(pdev)); + goto err_out_iounmap; + } + + /* we're going to reset, so assume we have no link for now */ + + netif_carrier_off(ndev); + netif_stop_queue(ndev); + + qdev->workqueue = create_singlethread_workqueue(ndev->name); + INIT_WORK(&qdev->reset_work, (void (*)(void *))ql_reset_work, qdev); + INIT_WORK(&qdev->tx_timeout_work, + (void (*)(void *))ql_tx_timeout_work, qdev); + + init_timer(&qdev->adapter_timer); + qdev->adapter_timer.function = ql3xxx_timer; + qdev->adapter_timer.expires = jiffies + HZ * 2; /* two second delay */ + qdev->adapter_timer.data = (unsigned long)qdev; + + if(!cards_found) { + printk(KERN_ALERT PFX "%s\n", DRV_STRING); + printk(KERN_ALERT PFX "Driver name: %s, Version: %s.\n", + DRV_NAME, DRV_VERSION); + } + ql_display_dev_info(ndev); + + cards_found++; + return 0; + +err_out_iounmap: + iounmap(qdev->mem_map_registers); +err_out_free_ndev: + free_netdev(ndev); +err_out_free_regions: + pci_release_regions(pdev); +err_out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +err_out: + return err; +} + +static void __devexit ql3xxx_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + struct ql3_adapter *qdev = netdev_priv(ndev); + + unregister_netdev(ndev); + qdev = netdev_priv(ndev); + + ql_disable_interrupts(qdev); + + if (qdev->workqueue) { + cancel_delayed_work(&qdev->reset_work); + cancel_delayed_work(&qdev->tx_timeout_work); + destroy_workqueue(qdev->workqueue); + qdev->workqueue = NULL; + } + + iounmap((void *)qdev->mmap_virt_base); + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(ndev); +} + +static struct pci_driver ql3xxx_driver = { + + .name = DRV_NAME, + .id_table = ql3xxx_pci_tbl, + .probe = ql3xxx_probe, + .remove = __devexit_p(ql3xxx_remove), +}; + +static int __init ql3xxx_init_module(void) +{ + return pci_register_driver(&ql3xxx_driver); +} + +static void __exit ql3xxx_exit(void) +{ + pci_unregister_driver(&ql3xxx_driver); +} + +module_init(ql3xxx_init_module); +module_exit(ql3xxx_exit); diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h new file mode 100644 index 00000000000..9492cee6b08 --- /dev/null +++ b/drivers/net/qla3xxx.h @@ -0,0 +1,1194 @@ +/* + * QLogic QLA3xxx NIC HBA Driver + * Copyright (c) 2003-2006 QLogic Corporation + * + * See LICENSE.qla3xxx for copyright and licensing details. + */ +#ifndef _QLA3XXX_H_ +#define _QLA3XXX_H_ + +/* + * IOCB Definitions... + */ +#pragma pack(1) + +#define OPCODE_OB_MAC_IOCB_FN0 0x01 +#define OPCODE_OB_MAC_IOCB_FN2 0x21 +#define OPCODE_OB_TCP_IOCB_FN0 0x03 +#define OPCODE_OB_TCP_IOCB_FN2 0x23 +#define OPCODE_UPDATE_NCB_IOCB_FN0 0x00 +#define OPCODE_UPDATE_NCB_IOCB_FN2 0x20 + +#define OPCODE_UPDATE_NCB_IOCB 0xF0 +#define OPCODE_IB_MAC_IOCB 0xF9 +#define OPCODE_IB_IP_IOCB 0xFA +#define OPCODE_IB_TCP_IOCB 0xFB +#define OPCODE_DUMP_PROTO_IOCB 0xFE +#define OPCODE_BUFFER_ALERT_IOCB 0xFB + +#define OPCODE_FUNC_ID_MASK 0x30 +#define OUTBOUND_MAC_IOCB 0x01 /* plus function bits */ +#define OUTBOUND_TCP_IOCB 0x03 /* plus function bits */ +#define UPDATE_NCB_IOCB 0x00 /* plus function bits */ + +#define FN0_MA_BITS_MASK 0x00 +#define FN1_MA_BITS_MASK 0x80 + +struct ob_mac_iocb_req { + u8 opcode; + u8 flags; +#define OB_MAC_IOCB_REQ_MA 0xC0 +#define OB_MAC_IOCB_REQ_F 0x20 +#define OB_MAC_IOCB_REQ_X 0x10 +#define OB_MAC_IOCB_REQ_D 0x02 +#define OB_MAC_IOCB_REQ_I 0x01 + __le16 reserved0; + + __le32 transaction_id; + __le16 data_len; + __le16 reserved1; + __le32 reserved2; + __le32 reserved3; + __le32 buf_addr0_low; + __le32 buf_addr0_high; + __le32 buf_0_len; + __le32 buf_addr1_low; + __le32 buf_addr1_high; + __le32 buf_1_len; + __le32 buf_addr2_low; + __le32 buf_addr2_high; + __le32 buf_2_len; + __le32 reserved4; + __le32 reserved5; +}; +/* + * The following constants define control bits for buffer + * length fields for all IOCB's. + */ +#define OB_MAC_IOCB_REQ_E 0x80000000 /* Last valid buffer in list. */ +#define OB_MAC_IOCB_REQ_C 0x40000000 /* points to an OAL. (continuation) */ +#define OB_MAC_IOCB_REQ_L 0x20000000 /* Auburn local address pointer. */ +#define OB_MAC_IOCB_REQ_R 0x10000000 /* 32-bit address pointer. */ + +struct ob_mac_iocb_rsp { + u8 opcode; + u8 flags; +#define OB_MAC_IOCB_RSP_P 0x08 +#define OB_MAC_IOCB_RSP_S 0x02 +#define OB_MAC_IOCB_RSP_I 0x01 + + __le16 reserved0; + __le32 transaction_id; + __le32 reserved1; + __le32 reserved2; +}; + +struct ib_mac_iocb_rsp { + u8 opcode; + u8 flags; +#define IB_MAC_IOCB_RSP_S 0x80 +#define IB_MAC_IOCB_RSP_H1 0x40 +#define IB_MAC_IOCB_RSP_H0 0x20 +#define IB_MAC_IOCB_RSP_B 0x10 +#define IB_MAC_IOCB_RSP_M 0x08 +#define IB_MAC_IOCB_RSP_MA 0x07 + + __le16 length; + __le32 reserved; + __le32 ial_low; + __le32 ial_high; + +}; + +struct ob_ip_iocb_req { + u8 opcode; + __le16 flags; +#define OB_IP_IOCB_REQ_O 0x100 +#define OB_IP_IOCB_REQ_H 0x008 +#define OB_IP_IOCB_REQ_U 0x004 +#define OB_IP_IOCB_REQ_D 0x002 +#define OB_IP_IOCB_REQ_I 0x001 + + u8 reserved0; + + __le32 transaction_id; + __le16 data_len; + __le16 reserved1; + __le32 hncb_ptr_low; + __le32 hncb_ptr_high; + __le32 buf_addr0_low; + __le32 buf_addr0_high; + __le32 buf_0_len; + __le32 buf_addr1_low; + __le32 buf_addr1_high; + __le32 buf_1_len; + __le32 buf_addr2_low; + __le32 buf_addr2_high; + __le32 buf_2_len; + __le32 reserved2; + __le32 reserved3; +}; + +/* defines for BufferLength fields above */ +#define OB_IP_IOCB_REQ_E 0x80000000 +#define OB_IP_IOCB_REQ_C 0x40000000 +#define OB_IP_IOCB_REQ_L 0x20000000 +#define OB_IP_IOCB_REQ_R 0x10000000 + +struct ob_ip_iocb_rsp { + u8 opcode; + u8 flags; +#define OB_MAC_IOCB_RSP_E 0x08 +#define OB_MAC_IOCB_RSP_L 0x04 +#define OB_MAC_IOCB_RSP_S 0x02 +#define OB_MAC_IOCB_RSP_I 0x01 + + __le16 reserved0; + __le32 transaction_id; + __le32 reserved1; + __le32 reserved2; +}; + +struct ob_tcp_iocb_req { + u8 opcode; + + u8 flags0; +#define OB_TCP_IOCB_REQ_P 0x80 +#define OB_TCP_IOCB_REQ_CI 0x20 +#define OB_TCP_IOCB_REQ_H 0x10 +#define OB_TCP_IOCB_REQ_LN 0x08 +#define OB_TCP_IOCB_REQ_K 0x04 +#define OB_TCP_IOCB_REQ_D 0x02 +#define OB_TCP_IOCB_REQ_I 0x01 + + u8 flags1; +#define OB_TCP_IOCB_REQ_OSM 0x40 +#define OB_TCP_IOCB_REQ_URG 0x20 +#define OB_TCP_IOCB_REQ_ACK 0x10 +#define OB_TCP_IOCB_REQ_PSH 0x08 +#define OB_TCP_IOCB_REQ_RST 0x04 +#define OB_TCP_IOCB_REQ_SYN 0x02 +#define OB_TCP_IOCB_REQ_FIN 0x01 + + u8 options_len; +#define OB_TCP_IOCB_REQ_OMASK 0xF0 +#define OB_TCP_IOCB_REQ_SHIFT 4 + + __le32 transaction_id; + __le32 data_len; + __le32 hncb_ptr_low; + __le32 hncb_ptr_high; + __le32 buf_addr0_low; + __le32 buf_addr0_high; + __le32 buf_0_len; + __le32 buf_addr1_low; + __le32 buf_addr1_high; + __le32 buf_1_len; + __le32 buf_addr2_low; + __le32 buf_addr2_high; + __le32 buf_2_len; + __le32 time_stamp; + __le32 reserved1; +}; + +struct ob_tcp_iocb_rsp { + u8 opcode; + + u8 flags0; +#define OB_TCP_IOCB_RSP_C 0x20 +#define OB_TCP_IOCB_RSP_H 0x10 +#define OB_TCP_IOCB_RSP_LN 0x08 +#define OB_TCP_IOCB_RSP_K 0x04 +#define OB_TCP_IOCB_RSP_D 0x02 +#define OB_TCP_IOCB_RSP_I 0x01 + + u8 flags1; +#define OB_TCP_IOCB_RSP_E 0x10 +#define OB_TCP_IOCB_RSP_W 0x08 +#define OB_TCP_IOCB_RSP_P 0x04 +#define OB_TCP_IOCB_RSP_T 0x02 +#define OB_TCP_IOCB_RSP_F 0x01 + + u8 state; +#define OB_TCP_IOCB_RSP_SMASK 0xF0 +#define OB_TCP_IOCB_RSP_SHIFT 4 + + __le32 transaction_id; + __le32 local_ncb_ptr; + __le32 reserved0; +}; + +struct ib_ip_iocb_rsp { + u8 opcode; + u8 flags; +#define IB_IP_IOCB_RSP_S 0x80 +#define IB_IP_IOCB_RSP_H1 0x40 +#define IB_IP_IOCB_RSP_H0 0x20 +#define IB_IP_IOCB_RSP_B 0x10 +#define IB_IP_IOCB_RSP_M 0x08 +#define IB_IP_IOCB_RSP_MA 0x07 + + __le16 length; + __le16 checksum; + __le16 reserved; +#define IB_IP_IOCB_RSP_R 0x01 + __le32 ial_low; + __le32 ial_high; +}; + +struct ib_tcp_iocb_rsp { + u8 opcode; + u8 flags; +#define IB_TCP_IOCB_RSP_P 0x80 +#define IB_TCP_IOCB_RSP_T 0x40 +#define IB_TCP_IOCB_RSP_D 0x20 +#define IB_TCP_IOCB_RSP_N 0x10 +#define IB_TCP_IOCB_RSP_IP 0x03 +#define IB_TCP_FLAG_MASK 0xf0 +#define IB_TCP_FLAG_IOCB_SYN 0x00 + +#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK) + + __le16 length; + __le32 hncb_ref_num; + __le32 ial_low; + __le32 ial_high; +}; + +struct net_rsp_iocb { + u8 opcode; + u8 flags; + __le16 reserved0; + __le32 reserved[3]; +}; +#pragma pack() + +/* + * Register Definitions... + */ +#define PORT0_PHY_ADDRESS 0x1e00 +#define PORT1_PHY_ADDRESS 0x1f00 + +#define ETHERNET_CRC_SIZE 4 + +#define MII_SCAN_REGISTER 0x00000001 + +/* 32-bit ispControlStatus */ +enum { + ISP_CONTROL_NP_MASK = 0x0003, + ISP_CONTROL_NP_PCSR = 0x0000, + ISP_CONTROL_NP_HMCR = 0x0001, + ISP_CONTROL_NP_LRAMCR = 0x0002, + ISP_CONTROL_NP_PSR = 0x0003, + ISP_CONTROL_RI = 0x0008, + ISP_CONTROL_CI = 0x0010, + ISP_CONTROL_PI = 0x0020, + ISP_CONTROL_IN = 0x0040, + ISP_CONTROL_BE = 0x0080, + ISP_CONTROL_FN_MASK = 0x0700, + ISP_CONTROL_FN0_NET = 0x0400, + ISP_CONTROL_FN0_SCSI = 0x0500, + ISP_CONTROL_FN1_NET = 0x0600, + ISP_CONTROL_FN1_SCSI = 0x0700, + ISP_CONTROL_LINK_DN_0 = 0x0800, + ISP_CONTROL_LINK_DN_1 = 0x1000, + ISP_CONTROL_FSR = 0x2000, + ISP_CONTROL_FE = 0x4000, + ISP_CONTROL_SR = 0x8000, +}; + +/* 32-bit ispInterruptMaskReg */ +enum { + ISP_IMR_ENABLE_INT = 0x0004, + ISP_IMR_DISABLE_RESET_INT = 0x0008, + ISP_IMR_DISABLE_CMPL_INT = 0x0010, + ISP_IMR_DISABLE_PROC_INT = 0x0020, +}; + +/* 32-bit serialPortInterfaceReg */ +enum { + ISP_SERIAL_PORT_IF_CLK = 0x0001, + ISP_SERIAL_PORT_IF_CS = 0x0002, + ISP_SERIAL_PORT_IF_D0 = 0x0004, + ISP_SERIAL_PORT_IF_DI = 0x0008, + ISP_NVRAM_MASK = (0x000F << 16), + ISP_SERIAL_PORT_IF_WE = 0x0010, + ISP_SERIAL_PORT_IF_NVR_MASK = 0x001F, + ISP_SERIAL_PORT_IF_SCI = 0x0400, + ISP_SERIAL_PORT_IF_SC0 = 0x0800, + ISP_SERIAL_PORT_IF_SCE = 0x1000, + ISP_SERIAL_PORT_IF_SDI = 0x2000, + ISP_SERIAL_PORT_IF_SDO = 0x4000, + ISP_SERIAL_PORT_IF_SDE = 0x8000, + ISP_SERIAL_PORT_IF_I2C_MASK = 0xFC00, +}; + +/* semaphoreReg */ +enum { + QL_RESOURCE_MASK_BASE_CODE = 0x7, + QL_RESOURCE_BITS_BASE_CODE = 0x4, + QL_DRVR_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 1), + QL_DDR_RAM_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 4), + QL_PHY_GIO_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 7), + QL_NVRAM_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 10), + QL_FLASH_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 13), + QL_DRVR_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (1 + 16)), + QL_DDR_RAM_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (4 + 16)), + QL_PHY_GIO_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (7 + 16)), + QL_NVRAM_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (10 + 16)), + QL_FLASH_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (13 + 16)), +}; + + /* + * QL3XXX memory-mapped registers + * QL3XXX has 4 "pages" of registers, each page occupying + * 256 bytes. Each page has a "common" area at the start and then + * page-specific registers after that. + */ +struct ql3xxx_common_registers { + u32 MB0; /* Offset 0x00 */ + u32 MB1; /* Offset 0x04 */ + u32 MB2; /* Offset 0x08 */ + u32 MB3; /* Offset 0x0c */ + u32 MB4; /* Offset 0x10 */ + u32 MB5; /* Offset 0x14 */ + u32 MB6; /* Offset 0x18 */ + u32 MB7; /* Offset 0x1c */ + u32 flashBiosAddr; + u32 flashBiosData; + u32 ispControlStatus; + u32 ispInterruptMaskReg; + u32 serialPortInterfaceReg; + u32 semaphoreReg; + u32 reqQProducerIndex; + u32 rspQConsumerIndex; + + u32 rxLargeQProducerIndex; + u32 rxSmallQProducerIndex; + u32 arcMadiCommand; + u32 arcMadiData; +}; + +enum { + EXT_HW_CONFIG_SP_MASK = 0x0006, + EXT_HW_CONFIG_SP_NONE = 0x0000, + EXT_HW_CONFIG_SP_BYTE_PARITY = 0x0002, + EXT_HW_CONFIG_SP_ECC = 0x0004, + EXT_HW_CONFIG_SP_ECCx = 0x0006, + EXT_HW_CONFIG_SIZE_MASK = 0x0060, + EXT_HW_CONFIG_SIZE_128M = 0x0000, + EXT_HW_CONFIG_SIZE_256M = 0x0020, + EXT_HW_CONFIG_SIZE_512M = 0x0040, + EXT_HW_CONFIG_SIZE_INVALID = 0x0060, + EXT_HW_CONFIG_PD = 0x0080, + EXT_HW_CONFIG_FW = 0x0200, + EXT_HW_CONFIG_US = 0x0400, + EXT_HW_CONFIG_DCS_MASK = 0x1800, + EXT_HW_CONFIG_DCS_9MA = 0x0000, + EXT_HW_CONFIG_DCS_15MA = 0x0800, + EXT_HW_CONFIG_DCS_18MA = 0x1000, + EXT_HW_CONFIG_DCS_24MA = 0x1800, + EXT_HW_CONFIG_DDS_MASK = 0x6000, + EXT_HW_CONFIG_DDS_9MA = 0x0000, + EXT_HW_CONFIG_DDS_15MA = 0x2000, + EXT_HW_CONFIG_DDS_18MA = 0x4000, + EXT_HW_CONFIG_DDS_24MA = 0x6000, +}; + +/* InternalChipConfig */ +enum { + INTERNAL_CHIP_DM = 0x0001, + INTERNAL_CHIP_SD = 0x0002, + INTERNAL_CHIP_RAP_MASK = 0x000C, + INTERNAL_CHIP_RAP_RR = 0x0000, + INTERNAL_CHIP_RAP_NRM = 0x0004, + INTERNAL_CHIP_RAP_ERM = 0x0008, + INTERNAL_CHIP_RAP_ERMx = 0x000C, + INTERNAL_CHIP_WE = 0x0010, + INTERNAL_CHIP_EF = 0x0020, + INTERNAL_CHIP_FR = 0x0040, + INTERNAL_CHIP_FW = 0x0080, + INTERNAL_CHIP_FI = 0x0100, + INTERNAL_CHIP_FT = 0x0200, +}; + +/* portControl */ +enum { + PORT_CONTROL_DS = 0x0001, + PORT_CONTROL_HH = 0x0002, + PORT_CONTROL_EI = 0x0004, + PORT_CONTROL_ET = 0x0008, + PORT_CONTROL_EF = 0x0010, + PORT_CONTROL_DRM = 0x0020, + PORT_CONTROL_RLB = 0x0040, + PORT_CONTROL_RCB = 0x0080, + PORT_CONTROL_MAC = 0x0100, + PORT_CONTROL_IPV = 0x0200, + PORT_CONTROL_IFP = 0x0400, + PORT_CONTROL_ITP = 0x0800, + PORT_CONTROL_FI = 0x1000, + PORT_CONTROL_DFP = 0x2000, + PORT_CONTROL_OI = 0x4000, + PORT_CONTROL_CC = 0x8000, +}; + +/* portStatus */ +enum { + PORT_STATUS_SM0 = 0x0001, + PORT_STATUS_SM1 = 0x0002, + PORT_STATUS_X = 0x0008, + PORT_STATUS_DL = 0x0080, + PORT_STATUS_IC = 0x0200, + PORT_STATUS_MRC = 0x0400, + PORT_STATUS_NL = 0x0800, + PORT_STATUS_REV_ID_MASK = 0x7000, + PORT_STATUS_REV_ID_1 = 0x1000, + PORT_STATUS_REV_ID_2 = 0x2000, + PORT_STATUS_REV_ID_3 = 0x3000, + PORT_STATUS_64 = 0x8000, + PORT_STATUS_UP0 = 0x10000, + PORT_STATUS_AC0 = 0x20000, + PORT_STATUS_AE0 = 0x40000, + PORT_STATUS_UP1 = 0x100000, + PORT_STATUS_AC1 = 0x200000, + PORT_STATUS_AE1 = 0x400000, + PORT_STATUS_F0_ENABLED = 0x1000000, + PORT_STATUS_F1_ENABLED = 0x2000000, + PORT_STATUS_F2_ENABLED = 0x4000000, + PORT_STATUS_F3_ENABLED = 0x8000000, +}; + +/* macMIIMgmtControlReg */ +enum { + MAC_ADDR_INDIRECT_PTR_REG_RP_MASK = 0x0003, + MAC_ADDR_INDIRECT_PTR_REG_RP_PRI_LWR = 0x0000, + MAC_ADDR_INDIRECT_PTR_REG_RP_PRI_UPR = 0x0001, + MAC_ADDR_INDIRECT_PTR_REG_RP_SEC_LWR = 0x0002, + MAC_ADDR_INDIRECT_PTR_REG_RP_SEC_UPR = 0x0003, + MAC_ADDR_INDIRECT_PTR_REG_PR = 0x0008, + MAC_ADDR_INDIRECT_PTR_REG_SS = 0x0010, + MAC_ADDR_INDIRECT_PTR_REG_SE = 0x0020, + MAC_ADDR_INDIRECT_PTR_REG_SP = 0x0040, + MAC_ADDR_INDIRECT_PTR_REG_PE = 0x0080, +}; + +/* macMIIMgmtControlReg */ +enum { + MAC_MII_CONTROL_RC = 0x0001, + MAC_MII_CONTROL_SC = 0x0002, + MAC_MII_CONTROL_AS = 0x0004, + MAC_MII_CONTROL_NP = 0x0008, + MAC_MII_CONTROL_CLK_SEL_MASK = 0x0070, + MAC_MII_CONTROL_CLK_SEL_DIV2 = 0x0000, + MAC_MII_CONTROL_CLK_SEL_DIV4 = 0x0010, + MAC_MII_CONTROL_CLK_SEL_DIV6 = 0x0020, + MAC_MII_CONTROL_CLK_SEL_DIV8 = 0x0030, + MAC_MII_CONTROL_CLK_SEL_DIV10 = 0x0040, + MAC_MII_CONTROL_CLK_SEL_DIV14 = 0x0050, + MAC_MII_CONTROL_CLK_SEL_DIV20 = 0x0060, + MAC_MII_CONTROL_CLK_SEL_DIV28 = 0x0070, + MAC_MII_CONTROL_RM = 0x8000, +}; + +/* macMIIStatusReg */ +enum { + MAC_MII_STATUS_BSY = 0x0001, + MAC_MII_STATUS_SC = 0x0002, + MAC_MII_STATUS_NV = 0x0004, +}; + +enum { + MAC_CONFIG_REG_PE = 0x0001, + MAC_CONFIG_REG_TF = 0x0002, + MAC_CONFIG_REG_RF = 0x0004, + MAC_CONFIG_REG_FD = 0x0008, + MAC_CONFIG_REG_GM = 0x0010, + MAC_CONFIG_REG_LB = 0x0020, + MAC_CONFIG_REG_SR = 0x8000, +}; + +enum { + MAC_HALF_DUPLEX_REG_ED = 0x10000, + MAC_HALF_DUPLEX_REG_NB = 0x20000, + MAC_HALF_DUPLEX_REG_BNB = 0x40000, + MAC_HALF_DUPLEX_REG_ALT = 0x80000, +}; + +enum { + IP_ADDR_INDEX_REG_MASK = 0x000f, + IP_ADDR_INDEX_REG_FUNC_0_PRI = 0x0000, + IP_ADDR_INDEX_REG_FUNC_0_SEC = 0x0001, + IP_ADDR_INDEX_REG_FUNC_1_PRI = 0x0002, + IP_ADDR_INDEX_REG_FUNC_1_SEC = 0x0003, + IP_ADDR_INDEX_REG_FUNC_2_PRI = 0x0004, + IP_ADDR_INDEX_REG_FUNC_2_SEC = 0x0005, + IP_ADDR_INDEX_REG_FUNC_3_PRI = 0x0006, + IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007, +}; + +enum { + PROBE_MUX_ADDR_REG_MUX_SEL_MASK = 0x003f, + PROBE_MUX_ADDR_REG_SYSCLK = 0x0000, + PROBE_MUX_ADDR_REG_PCICLK = 0x0040, + PROBE_MUX_ADDR_REG_NRXCLK = 0x0080, + PROBE_MUX_ADDR_REG_CPUCLK = 0x00C0, + PROBE_MUX_ADDR_REG_MODULE_SEL_MASK = 0x3f00, + PROBE_MUX_ADDR_REG_UP = 0x4000, + PROBE_MUX_ADDR_REG_RE = 0x8000, +}; + +enum { + STATISTICS_INDEX_REG_MASK = 0x01ff, + STATISTICS_INDEX_REG_MAC0_TX_FRAME = 0x0000, + STATISTICS_INDEX_REG_MAC0_TX_BYTES = 0x0001, + STATISTICS_INDEX_REG_MAC0_TX_STAT1 = 0x0002, + STATISTICS_INDEX_REG_MAC0_TX_STAT2 = 0x0003, + STATISTICS_INDEX_REG_MAC0_TX_STAT3 = 0x0004, + STATISTICS_INDEX_REG_MAC0_TX_STAT4 = 0x0005, + STATISTICS_INDEX_REG_MAC0_TX_STAT5 = 0x0006, + STATISTICS_INDEX_REG_MAC0_RX_FRAME = 0x0007, + STATISTICS_INDEX_REG_MAC0_RX_BYTES = 0x0008, + STATISTICS_INDEX_REG_MAC0_RX_STAT1 = 0x0009, + STATISTICS_INDEX_REG_MAC0_RX_STAT2 = 0x000a, + STATISTICS_INDEX_REG_MAC0_RX_STAT3 = 0x000b, + STATISTICS_INDEX_REG_MAC0_RX_ERR_CRC = 0x000c, + STATISTICS_INDEX_REG_MAC0_RX_ERR_ENC = 0x000d, + STATISTICS_INDEX_REG_MAC0_RX_ERR_LEN = 0x000e, + STATISTICS_INDEX_REG_MAC0_RX_STAT4 = 0x000f, + STATISTICS_INDEX_REG_MAC1_TX_FRAME = 0x0010, + STATISTICS_INDEX_REG_MAC1_TX_BYTES = 0x0011, + STATISTICS_INDEX_REG_MAC1_TX_STAT1 = 0x0012, + STATISTICS_INDEX_REG_MAC1_TX_STAT2 = 0x0013, + STATISTICS_INDEX_REG_MAC1_TX_STAT3 = 0x0014, + STATISTICS_INDEX_REG_MAC1_TX_STAT4 = 0x0015, + STATISTICS_INDEX_REG_MAC1_TX_STAT5 = 0x0016, + STATISTICS_INDEX_REG_MAC1_RX_FRAME = 0x0017, + STATISTICS_INDEX_REG_MAC1_RX_BYTES = 0x0018, + STATISTICS_INDEX_REG_MAC1_RX_STAT1 = 0x0019, + STATISTICS_INDEX_REG_MAC1_RX_STAT2 = 0x001a, + STATISTICS_INDEX_REG_MAC1_RX_STAT3 = 0x001b, + STATISTICS_INDEX_REG_MAC1_RX_ERR_CRC = 0x001c, + STATISTICS_INDEX_REG_MAC1_RX_ERR_ENC = 0x001d, + STATISTICS_INDEX_REG_MAC1_RX_ERR_LEN = 0x001e, + STATISTICS_INDEX_REG_MAC1_RX_STAT4 = 0x001f, + STATISTICS_INDEX_REG_IP_TX_PKTS = 0x0020, + STATISTICS_INDEX_REG_IP_TX_BYTES = 0x0021, + STATISTICS_INDEX_REG_IP_TX_FRAG = 0x0022, + STATISTICS_INDEX_REG_IP_RX_PKTS = 0x0023, + STATISTICS_INDEX_REG_IP_RX_BYTES = 0x0024, + STATISTICS_INDEX_REG_IP_RX_FRAG = 0x0025, + STATISTICS_INDEX_REG_IP_DGRM_REASSEMBLY = 0x0026, + STATISTICS_INDEX_REG_IP_V6_RX_PKTS = 0x0027, + STATISTICS_INDEX_REG_IP_RX_PKTERR = 0x0028, + STATISTICS_INDEX_REG_IP_REASSEMBLY_ERR = 0x0029, + STATISTICS_INDEX_REG_TCP_TX_SEG = 0x0030, + STATISTICS_INDEX_REG_TCP_TX_BYTES = 0x0031, + STATISTICS_INDEX_REG_TCP_RX_SEG = 0x0032, + STATISTICS_INDEX_REG_TCP_RX_BYTES = 0x0033, + STATISTICS_INDEX_REG_TCP_TIMER_EXP = 0x0034, + STATISTICS_INDEX_REG_TCP_RX_ACK = 0x0035, + STATISTICS_INDEX_REG_TCP_TX_ACK = 0x0036, + STATISTICS_INDEX_REG_TCP_RX_ERR = 0x0037, + STATISTICS_INDEX_REG_TCP_RX_WIN_PROBE = 0x0038, + STATISTICS_INDEX_REG_TCP_ECC_ERR_CORR = 0x003f, +}; + +enum { + PORT_FATAL_ERROR_STATUS_OFB_RE_MAC0 = 0x00000001, + PORT_FATAL_ERROR_STATUS_OFB_RE_MAC1 = 0x00000002, + PORT_FATAL_ERROR_STATUS_OFB_WE = 0x00000004, + PORT_FATAL_ERROR_STATUS_IFB_RE = 0x00000008, + PORT_FATAL_ERROR_STATUS_IFB_WE_MAC0 = 0x00000010, + PORT_FATAL_ERROR_STATUS_IFB_WE_MAC1 = 0x00000020, + PORT_FATAL_ERROR_STATUS_ODE_RE = 0x00000040, + PORT_FATAL_ERROR_STATUS_ODE_WE = 0x00000080, + PORT_FATAL_ERROR_STATUS_IDE_RE = 0x00000100, + PORT_FATAL_ERROR_STATUS_IDE_WE = 0x00000200, + PORT_FATAL_ERROR_STATUS_SDE_RE = 0x00000400, + PORT_FATAL_ERROR_STATUS_SDE_WE = 0x00000800, + PORT_FATAL_ERROR_STATUS_BLE = 0x00001000, + PORT_FATAL_ERROR_STATUS_SPE = 0x00002000, + PORT_FATAL_ERROR_STATUS_EP0 = 0x00004000, + PORT_FATAL_ERROR_STATUS_EP1 = 0x00008000, + PORT_FATAL_ERROR_STATUS_ICE = 0x00010000, + PORT_FATAL_ERROR_STATUS_ILE = 0x00020000, + PORT_FATAL_ERROR_STATUS_OPE = 0x00040000, + PORT_FATAL_ERROR_STATUS_TA = 0x00080000, + PORT_FATAL_ERROR_STATUS_MA = 0x00100000, + PORT_FATAL_ERROR_STATUS_SCE = 0x00200000, + PORT_FATAL_ERROR_STATUS_RPE = 0x00400000, + PORT_FATAL_ERROR_STATUS_MPE = 0x00800000, + PORT_FATAL_ERROR_STATUS_OCE = 0x01000000, +}; + +/* + * port control and status page - page 0 + */ + +struct ql3xxx_port_registers { + struct ql3xxx_common_registers CommonRegs; + + u32 ExternalHWConfig; + u32 InternalChipConfig; + u32 portControl; + u32 portStatus; + u32 macAddrIndirectPtrReg; + u32 macAddrDataReg; + u32 macMIIMgmtControlReg; + u32 macMIIMgmtAddrReg; + u32 macMIIMgmtDataReg; + u32 macMIIStatusReg; + u32 mac0ConfigReg; + u32 mac0IpgIfgReg; + u32 mac0HalfDuplexReg; + u32 mac0MaxFrameLengthReg; + u32 mac0PauseThresholdReg; + u32 mac1ConfigReg; + u32 mac1IpgIfgReg; + u32 mac1HalfDuplexReg; + u32 mac1MaxFrameLengthReg; + u32 mac1PauseThresholdReg; + u32 ipAddrIndexReg; + u32 ipAddrDataReg; + u32 ipReassemblyTimeout; + u32 tcpMaxWindow; + u32 currentTcpTimestamp[2]; + u32 internalRamRWAddrReg; + u32 internalRamWDataReg; + u32 reclaimedBufferAddrRegLow; + u32 reclaimedBufferAddrRegHigh; + u32 reserved[2]; + u32 fpgaRevID; + u32 localRamAddr; + u32 localRamDataAutoIncr; + u32 localRamDataNonIncr; + u32 gpOutput; + u32 gpInput; + u32 probeMuxAddr; + u32 probeMuxData; + u32 statisticsIndexReg; + u32 statisticsReadDataRegAutoIncr; + u32 statisticsReadDataRegNoIncr; + u32 PortFatalErrStatus; +}; + +/* + * port host memory config page - page 1 + */ +struct ql3xxx_host_memory_registers { + struct ql3xxx_common_registers CommonRegs; + + u32 reserved[12]; + + /* Network Request Queue */ + u32 reqConsumerIndex; + u32 reqConsumerIndexAddrLow; + u32 reqConsumerIndexAddrHigh; + u32 reqBaseAddrLow; + u32 reqBaseAddrHigh; + u32 reqLength; + + /* Network Completion Queue */ + u32 rspProducerIndex; + u32 rspProducerIndexAddrLow; + u32 rspProducerIndexAddrHigh; + u32 rspBaseAddrLow; + u32 rspBaseAddrHigh; + u32 rspLength; + + /* RX Large Buffer Queue */ + u32 rxLargeQConsumerIndex; + u32 rxLargeQBaseAddrLow; + u32 rxLargeQBaseAddrHigh; + u32 rxLargeQLength; + u32 rxLargeBufferLength; + + /* RX Small Buffer Queue */ + u32 rxSmallQConsumerIndex; + u32 rxSmallQBaseAddrLow; + u32 rxSmallQBaseAddrHigh; + u32 rxSmallQLength; + u32 rxSmallBufferLength; + +}; + +/* + * port local RAM page - page 2 + */ +struct ql3xxx_local_ram_registers { + struct ql3xxx_common_registers CommonRegs; + u32 bufletSize; + u32 maxBufletCount; + u32 currentBufletCount; + u32 reserved; + u32 freeBufletThresholdLow; + u32 freeBufletThresholdHigh; + u32 ipHashTableBase; + u32 ipHashTableCount; + u32 tcpHashTableBase; + u32 tcpHashTableCount; + u32 ncbBase; + u32 maxNcbCount; + u32 currentNcbCount; + u32 drbBase; + u32 maxDrbCount; + u32 currentDrbCount; +}; + +/* + * definitions for Semaphore bits in Semaphore/Serial NVRAM interface register + */ + +#define LS_64BITS(x) (u32)(0xffffffff & ((u64)x)) +#define MS_64BITS(x) (u32)(0xffffffff & (((u64)x)>>16>>16) ) + +/* + * I/O register + */ + +enum { + CONTROL_REG = 0, + STATUS_REG = 1, + PHY_STAT_LINK_UP = 0x0004, + PHY_CTRL_LOOPBACK = 0x4000, + + PETBI_CONTROL_REG = 0x00, + PETBI_CTRL_SOFT_RESET = 0x8000, + PETBI_CTRL_AUTO_NEG = 0x1000, + PETBI_CTRL_RESTART_NEG = 0x0200, + PETBI_CTRL_FULL_DUPLEX = 0x0100, + PETBI_CTRL_SPEED_1000 = 0x0040, + + PETBI_STATUS_REG = 0x01, + PETBI_STAT_NEG_DONE = 0x0020, + PETBI_STAT_LINK_UP = 0x0004, + + PETBI_NEG_ADVER = 0x04, + PETBI_NEG_PAUSE = 0x0080, + PETBI_NEG_PAUSE_MASK = 0x0180, + PETBI_NEG_DUPLEX = 0x0020, + PETBI_NEG_DUPLEX_MASK = 0x0060, + + PETBI_NEG_PARTNER = 0x05, + PETBI_NEG_ERROR_MASK = 0x3000, + + PETBI_EXPANSION_REG = 0x06, + PETBI_EXP_PAGE_RX = 0x0002, + + PETBI_TBI_CTRL = 0x11, + PETBI_TBI_RESET = 0x8000, + PETBI_TBI_AUTO_SENSE = 0x0100, + PETBI_TBI_SERDES_MODE = 0x0010, + PETBI_TBI_SERDES_WRAP = 0x0002, + + AUX_CONTROL_STATUS = 0x1c, + PHY_AUX_NEG_DONE = 0x8000, + PHY_NEG_PARTNER = 5, + PHY_AUX_DUPLEX_STAT = 0x0020, + PHY_AUX_SPEED_STAT = 0x0018, + PHY_AUX_NO_HW_STRAP = 0x0004, + PHY_AUX_RESET_STICK = 0x0002, + PHY_NEG_PAUSE = 0x0400, + PHY_CTRL_SOFT_RESET = 0x8000, + PHY_NEG_ADVER = 4, + PHY_NEG_ADV_SPEED = 0x01e0, + PHY_CTRL_RESTART_NEG = 0x0200, +}; +enum { +/* AM29LV Flash definitions */ + FM93C56A_START = 0x1, +/* Commands */ + FM93C56A_READ = 0x2, + FM93C56A_WEN = 0x0, + FM93C56A_WRITE = 0x1, + FM93C56A_WRITE_ALL = 0x0, + FM93C56A_WDS = 0x0, + FM93C56A_ERASE = 0x3, + FM93C56A_ERASE_ALL = 0x0, +/* Command Extentions */ + FM93C56A_WEN_EXT = 0x3, + FM93C56A_WRITE_ALL_EXT = 0x1, + FM93C56A_WDS_EXT = 0x0, + FM93C56A_ERASE_ALL_EXT = 0x2, +/* Special Bits */ + FM93C56A_READ_DUMMY_BITS = 1, + FM93C56A_READY = 0, + FM93C56A_BUSY = 1, + FM93C56A_CMD_BITS = 2, +/* AM29LV Flash definitions */ + FM93C56A_SIZE_8 = 0x100, + FM93C56A_SIZE_16 = 0x80, + FM93C66A_SIZE_8 = 0x200, + FM93C66A_SIZE_16 = 0x100, + FM93C86A_SIZE_16 = 0x400, +/* Address Bits */ + FM93C56A_NO_ADDR_BITS_16 = 8, + FM93C56A_NO_ADDR_BITS_8 = 9, + FM93C86A_NO_ADDR_BITS_16 = 10, +/* Data Bits */ + FM93C56A_DATA_BITS_16 = 16, + FM93C56A_DATA_BITS_8 = 8, +}; +enum { +/* Auburn Bits */ + AUBURN_EEPROM_DI = 0x8, + AUBURN_EEPROM_DI_0 = 0x0, + AUBURN_EEPROM_DI_1 = 0x8, + AUBURN_EEPROM_DO = 0x4, + AUBURN_EEPROM_DO_0 = 0x0, + AUBURN_EEPROM_DO_1 = 0x4, + AUBURN_EEPROM_CS = 0x2, + AUBURN_EEPROM_CS_0 = 0x0, + AUBURN_EEPROM_CS_1 = 0x2, + AUBURN_EEPROM_CLK_RISE = 0x1, + AUBURN_EEPROM_CLK_FALL = 0x0, +}; +enum {EEPROM_SIZE = FM93C86A_SIZE_16, + EEPROM_NO_ADDR_BITS = FM93C86A_NO_ADDR_BITS_16, + EEPROM_NO_DATA_BITS = FM93C56A_DATA_BITS_16, +}; + +/* + * MAC Config data structure + */ + struct eeprom_port_cfg { + u16 etherMtu_mac; + u16 pauseThreshold_mac; + u16 resumeThreshold_mac; + u16 portConfiguration; +#define PORT_CONFIG_AUTO_NEG_ENABLED 0x8000 +#define PORT_CONFIG_SYM_PAUSE_ENABLED 0x4000 +#define PORT_CONFIG_FULL_DUPLEX_ENABLED 0x2000 +#define PORT_CONFIG_HALF_DUPLEX_ENABLED 0x1000 +#define PORT_CONFIG_1000MB_SPEED 0x0400 +#define PORT_CONFIG_100MB_SPEED 0x0200 +#define PORT_CONFIG_10MB_SPEED 0x0100 +#define PORT_CONFIG_LINK_SPEED_MASK 0x0F00 + u16 reserved[12]; + +}; + +/* + * BIOS data structure + */ +struct eeprom_bios_cfg { + u16 SpinDlyEn:1, disBios:1, EnMemMap:1, EnSelectBoot:1, Reserved:12; + + u8 bootID0:7, boodID0Valid:1; + u8 bootLun0[8]; + + u8 bootID1:7, boodID1Valid:1; + u8 bootLun1[8]; + + u16 MaxLunsTrgt; + u8 reserved[10]; +}; + +/* + * Function Specific Data structure + */ +struct eeprom_function_cfg { + u8 reserved[30]; + u8 macAddress[6]; + u8 macAddressSecondary[6]; + + u16 subsysVendorId; + u16 subsysDeviceId; +}; + +/* + * EEPROM format + */ +struct eeprom_data { + u8 asicId[4]; + u8 version; + u8 numPorts; + u16 boardId; + +#define EEPROM_BOARDID_STR_SIZE 16 +#define EEPROM_SERIAL_NUM_SIZE 16 + + u8 boardIdStr[16]; + u8 serialNumber[16]; + u16 extHwConfig; + struct eeprom_port_cfg macCfg_port0; + struct eeprom_port_cfg macCfg_port1; + u16 bufletSize; + u16 bufletCount; + u16 tcpWindowThreshold50; + u16 tcpWindowThreshold25; + u16 tcpWindowThreshold0; + u16 ipHashTableBaseHi; + u16 ipHashTableBaseLo; + u16 ipHashTableSize; + u16 tcpHashTableBaseHi; + u16 tcpHashTableBaseLo; + u16 tcpHashTableSize; + u16 ncbTableBaseHi; + u16 ncbTableBaseLo; + u16 ncbTableSize; + u16 drbTableBaseHi; + u16 drbTableBaseLo; + u16 drbTableSize; + u16 reserved_142[4]; + u16 ipReassemblyTimeout; + u16 tcpMaxWindowSize; + u16 ipSecurity; +#define IPSEC_CONFIG_PRESENT 0x0001 + u8 reserved_156[294]; + u16 qDebug[8]; + struct eeprom_function_cfg funcCfg_fn0; + u16 reserved_510; + u8 oemSpace[432]; + struct eeprom_bios_cfg biosCfg_fn1; + struct eeprom_function_cfg funcCfg_fn1; + u16 reserved_1022; + u8 reserved_1024[464]; + struct eeprom_function_cfg funcCfg_fn2; + u16 reserved_1534; + u8 reserved_1536[432]; + struct eeprom_bios_cfg biosCfg_fn3; + struct eeprom_function_cfg funcCfg_fn3; + u16 checksum; +}; + +/* + * General definitions... + */ + +/* + * Below are a number compiler switches for controlling driver behavior. + * Some are not supported under certain conditions and are notated as such. + */ + +#define QL3XXX_VENDOR_ID 0x1077 +#define QL3022_DEVICE_ID 0x3022 + +/* MTU & Frame Size stuff */ +#define NORMAL_MTU_SIZE ETH_DATA_LEN +#define JUMBO_MTU_SIZE 9000 +#define VLAN_ID_LEN 2 + +/* Request Queue Related Definitions */ +#define NUM_REQ_Q_ENTRIES 256 /* so that 64 * 64 = 4096 (1 page) */ + +/* Response Queue Related Definitions */ +#define NUM_RSP_Q_ENTRIES 256 /* so that 256 * 16 = 4096 (1 page) */ + +/* Transmit and Receive Buffers */ +#define NUM_LBUFQ_ENTRIES 128 +#define NUM_SBUFQ_ENTRIES 64 +#define QL_SMALL_BUFFER_SIZE 32 +#define QL_ADDR_ELE_PER_BUFQ_ENTRY \ +(sizeof(struct lrg_buf_q_entry) / sizeof(struct bufq_addr_element)) + /* Each send has at least control block. This is how many we keep. */ +#define NUM_SMALL_BUFFERS NUM_SBUFQ_ENTRIES * QL_ADDR_ELE_PER_BUFQ_ENTRY +#define NUM_LARGE_BUFFERS NUM_LBUFQ_ENTRIES * QL_ADDR_ELE_PER_BUFQ_ENTRY +#define QL_HEADER_SPACE 32 /* make header space at top of skb. */ +/* + * Large & Small Buffers for Receives + */ +struct lrg_buf_q_entry { + + u32 addr0_lower; +#define IAL_LAST_ENTRY 0x00000001 +#define IAL_CONT_ENTRY 0x00000002 +#define IAL_FLAG_MASK 0x00000003 + u32 addr0_upper; + u32 addr1_lower; + u32 addr1_upper; + u32 addr2_lower; + u32 addr2_upper; + u32 addr3_lower; + u32 addr3_upper; + u32 addr4_lower; + u32 addr4_upper; + u32 addr5_lower; + u32 addr5_upper; + u32 addr6_lower; + u32 addr6_upper; + u32 addr7_lower; + u32 addr7_upper; + +}; + +struct bufq_addr_element { + u32 addr_low; + u32 addr_high; +}; + +#define QL_NO_RESET 0 +#define QL_DO_RESET 1 + +enum link_state_t { + LS_UNKNOWN = 0, + LS_DOWN, + LS_DEGRADE, + LS_RECOVER, + LS_UP, +}; + +struct ql_rcv_buf_cb { + struct ql_rcv_buf_cb *next; + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); + __le32 buf_phy_addr_low; + __le32 buf_phy_addr_high; + int index; +}; + +struct ql_tx_buf_cb { + struct sk_buff *skb; + struct ob_mac_iocb_req *queue_entry ; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); +}; + +/* definitions for type field */ +#define QL_BUF_TYPE_MACIOCB 0x01 +#define QL_BUF_TYPE_IPIOCB 0x02 +#define QL_BUF_TYPE_TCPIOCB 0x03 + +/* qdev->flags definitions. */ +enum { QL_RESET_DONE = 1, /* Reset finished. */ + QL_RESET_ACTIVE = 2, /* Waiting for reset to finish. */ + QL_RESET_START = 3, /* Please reset the chip. */ + QL_RESET_PER_SCSI = 4, /* SCSI driver requests reset. */ + QL_TX_TIMEOUT = 5, /* Timeout in progress. */ + QL_LINK_MASTER = 6, /* This driver controls the link. */ + QL_ADAPTER_UP = 7, /* Adapter has been brought up. */ + QL_THREAD_UP = 8, /* This flag is available. */ + QL_LINK_UP = 9, /* Link Status. */ + QL_ALLOC_REQ_RSP_Q_DONE = 10, + QL_ALLOC_BUFQS_DONE = 11, + QL_ALLOC_SMALL_BUF_DONE = 12, + QL_LINK_OPTICAL = 13, + QL_MSI_ENABLED = 14, +}; + +/* + * ql3_adapter - The main Adapter structure definition. + * This structure has all fields relevant to the hardware. + */ + +struct ql3_adapter { + u32 reserved_00; + unsigned long flags; + + /* PCI Configuration information for this device */ + struct pci_dev *pdev; + struct net_device *ndev; /* Parent NET device */ + + /* Hardware information */ + u8 chip_rev_id; + u8 pci_slot; + u8 pci_width; + u8 pci_x; + u32 msi; + int index; + struct timer_list adapter_timer; /* timer used for various functions */ + + spinlock_t adapter_lock; + spinlock_t hw_lock; + + /* PCI Bus Relative Register Addresses */ + u8 *mmap_virt_base; /* stores return value from ioremap() */ + struct ql3xxx_port_registers __iomem *mem_map_registers; + u32 current_page; /* tracks current register page */ + + u32 msg_enable; + u8 reserved_01[2]; + u8 reserved_02[2]; + + /* Page for Shadow Registers */ + void *shadow_reg_virt_addr; + dma_addr_t shadow_reg_phy_addr; + + /* Net Request Queue */ + u32 req_q_size; + u32 reserved_03; + struct ob_mac_iocb_req *req_q_virt_addr; + dma_addr_t req_q_phy_addr; + u16 req_producer_index; + u16 reserved_04; + u16 *preq_consumer_index; + u32 req_consumer_index_phy_addr_high; + u32 req_consumer_index_phy_addr_low; + atomic_t tx_count; + struct ql_tx_buf_cb tx_buf[NUM_REQ_Q_ENTRIES]; + + /* Net Response Queue */ + u32 rsp_q_size; + u32 eeprom_cmd_data; + struct net_rsp_iocb *rsp_q_virt_addr; + dma_addr_t rsp_q_phy_addr; + struct net_rsp_iocb *rsp_current; + u16 rsp_consumer_index; + u16 reserved_06; + u32 *prsp_producer_index; + u32 rsp_producer_index_phy_addr_high; + u32 rsp_producer_index_phy_addr_low; + + /* Large Buffer Queue */ + u32 lrg_buf_q_alloc_size; + u32 lrg_buf_q_size; + void *lrg_buf_q_alloc_virt_addr; + void *lrg_buf_q_virt_addr; + dma_addr_t lrg_buf_q_alloc_phy_addr; + dma_addr_t lrg_buf_q_phy_addr; + u32 lrg_buf_q_producer_index; + u32 lrg_buf_release_cnt; + struct bufq_addr_element *lrg_buf_next_free; + + /* Large (Receive) Buffers */ + struct ql_rcv_buf_cb lrg_buf[NUM_LARGE_BUFFERS]; + struct ql_rcv_buf_cb *lrg_buf_free_head; + struct ql_rcv_buf_cb *lrg_buf_free_tail; + u32 lrg_buf_free_count; + u32 lrg_buffer_len; + u32 lrg_buf_index; + u32 lrg_buf_skb_check; + + /* Small Buffer Queue */ + u32 small_buf_q_alloc_size; + u32 small_buf_q_size; + u32 small_buf_q_producer_index; + void *small_buf_q_alloc_virt_addr; + void *small_buf_q_virt_addr; + dma_addr_t small_buf_q_alloc_phy_addr; + dma_addr_t small_buf_q_phy_addr; + u32 small_buf_index; + + /* Small (Receive) Buffers */ + void *small_buf_virt_addr; + dma_addr_t small_buf_phy_addr; + u32 small_buf_phy_addr_low; + u32 small_buf_phy_addr_high; + u32 small_buf_release_cnt; + u32 small_buf_total_size; + + /* ISR related, saves status for DPC. */ + u32 control_status; + + struct eeprom_data nvram_data; + struct timer_list ioctl_timer; + u32 port_link_state; + u32 last_rsp_offset; + + /* 4022 specific */ + u32 mac_index; /* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */ + u32 PHYAddr; /* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */ + u32 mac_ob_opcode; /* Opcode to use on mac transmission */ + u32 tcp_ob_opcode; /* Opcode to use on tcp transmission */ + u32 update_ob_opcode; /* Opcode to use for updating NCB */ + u32 mb_bit_mask; /* MA Bits mask to use on transmission */ + u32 numPorts; + struct net_device_stats stats; + struct workqueue_struct *workqueue; + struct work_struct reset_work; + struct work_struct tx_timeout_work; + u32 max_frame_size; +}; + +#endif /* _QLA3XXX_H_ */ diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 4c2f575faad..5722a5638ff 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2809,7 +2809,7 @@ static struct pci_driver rtl8169_pci_driver = { static int __init rtl8169_init_module(void) { - return pci_module_init(&rtl8169_pci_driver); + return pci_register_driver(&rtl8169_pci_driver); } static void __exit diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c index c3ed734cbe3..31bcdad5471 100644 --- a/drivers/net/rrunner.c +++ b/drivers/net/rrunner.c @@ -1736,7 +1736,7 @@ static struct pci_driver rr_driver = { static int __init rr_init_module(void) { - return pci_module_init(&rr_driver); + return pci_register_driver(&rr_driver); } static void __exit rr_cleanup_module(void) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e72e0e09906..c16f9156c98 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -7233,7 +7233,7 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) int __init s2io_starter(void) { - return pci_module_init(&s2io_driver); + return pci_register_driver(&s2io_driver); } /** diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c index b2acedbefa8..c479b07be78 100644 --- a/drivers/net/saa9730.c +++ b/drivers/net/saa9730.c @@ -1131,7 +1131,7 @@ static struct pci_driver saa9730_driver = { static int __init saa9730_init(void) { - return pci_module_init(&saa9730_driver); + return pci_register_driver(&saa9730_driver); } static void __exit saa9730_cleanup(void) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index df0cbebb327..16e30d523fc 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1871,7 +1871,7 @@ static struct pci_driver sis190_pci_driver = { static int __init sis190_init_module(void) { - return pci_module_init(&sis190_pci_driver); + return pci_register_driver(&sis190_pci_driver); } static void __exit sis190_cleanup_module(void) diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 29ee7ffedff..6af50286349 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -134,6 +134,7 @@ static const struct mii_chip_info { { "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN }, { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME}, { "ICS LAN PHY", 0x0015, 0xF440, LAN }, + { "ICS LAN PHY", 0x0143, 0xBC70, LAN }, { "NS 83851 PHY", 0x2000, 0x5C20, MIX }, { "NS 83847 PHY", 0x2000, 0x5C30, MIX }, { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN }, @@ -2495,7 +2496,7 @@ static int __init sis900_init_module(void) printk(version); #endif - return pci_module_init(&sis900_pci_driver); + return pci_register_driver(&sis900_pci_driver); } static void __exit sis900_cleanup_module(void) diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index ee62845d3ac..49e76c7f10d 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -5133,7 +5133,7 @@ static struct pci_driver skge_driver = { static int __init skge_init(void) { - return pci_module_init(&skge_driver); + return pci_register_driver(&skge_driver); } static void __exit skge_exit(void) diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index b5714a60237..8e4d18440a5 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -2280,7 +2280,7 @@ static struct pci_driver skfddi_pci_driver = { static int __init skfd_init(void) { - return pci_module_init(&skfddi_pci_driver); + return pci_register_driver(&skfddi_pci_driver); } static void __exit skfd_exit(void) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index ad878dfddef..fba8b7455d8 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -43,7 +43,7 @@ #include "skge.h" #define DRV_NAME "skge" -#define DRV_VERSION "1.6" +#define DRV_VERSION "1.8" #define PFX DRV_NAME " " #define DEFAULT_TX_RING_SIZE 128 @@ -91,7 +91,7 @@ MODULE_DEVICE_TABLE(pci, skge_id_table); static int skge_up(struct net_device *dev); static int skge_down(struct net_device *dev); static void skge_phy_reset(struct skge_port *skge); -static void skge_tx_clean(struct skge_port *skge); +static void skge_tx_clean(struct net_device *dev); static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static void genesis_get_stats(struct skge_port *skge, u64 *data); @@ -105,6 +105,7 @@ static const int txqaddr[] = { Q_XA1, Q_XA2 }; static const int rxqaddr[] = { Q_R1, Q_R2 }; static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F }; static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F }; +static const u32 irqmask[] = { IS_R1_F|IS_XA1_F, IS_R2_F|IS_XA2_F }; static int skge_get_regs_len(struct net_device *dev) { @@ -818,8 +819,9 @@ static void skge_rx_clean(struct skge_port *skge) /* Allocate buffers for receive ring * For receive: to_clean is next received frame. */ -static int skge_rx_fill(struct skge_port *skge) +static int skge_rx_fill(struct net_device *dev) { + struct skge_port *skge = netdev_priv(dev); struct skge_ring *ring = &skge->rx_ring; struct skge_element *e; @@ -827,7 +829,8 @@ static int skge_rx_fill(struct skge_port *skge) do { struct sk_buff *skb; - skb = alloc_skb(skge->rx_buf_size + NET_IP_ALIGN, GFP_KERNEL); + skb = __netdev_alloc_skb(dev, skge->rx_buf_size + NET_IP_ALIGN, + GFP_KERNEL); if (!skb) return -ENOMEM; @@ -2178,7 +2181,7 @@ static int skge_up(struct net_device *dev) if (err) goto free_pci_mem; - err = skge_rx_fill(skge); + err = skge_rx_fill(dev); if (err) goto free_rx_ring; @@ -2281,7 +2284,7 @@ static int skge_down(struct net_device *dev) skge_led(skge, LED_MODE_OFF); netif_poll_disable(dev); - skge_tx_clean(skge); + skge_tx_clean(dev); skge_rx_clean(skge); kfree(skge->rx_ring.start); @@ -2306,25 +2309,12 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) int i; u32 control, len; u64 map; - unsigned long flags; if (skb_padto(skb, ETH_ZLEN)) return NETDEV_TX_OK; - if (!spin_trylock_irqsave(&skge->tx_lock, flags)) - /* Collision - tell upper layer to requeue */ - return NETDEV_TX_LOCKED; - - if (unlikely(skge_avail(&skge->tx_ring) < skb_shinfo(skb)->nr_frags + 1)) { - if (!netif_queue_stopped(dev)) { - netif_stop_queue(dev); - - printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", - dev->name); - } - spin_unlock_irqrestore(&skge->tx_lock, flags); + if (unlikely(skge_avail(&skge->tx_ring) < skb_shinfo(skb)->nr_frags + 1)) return NETDEV_TX_BUSY; - } e = skge->tx_ring.to_use; td = e->desc; @@ -2399,8 +2389,6 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); } - spin_unlock_irqrestore(&skge->tx_lock, flags); - dev->trans_start = jiffies; return NETDEV_TX_OK; @@ -2430,18 +2418,18 @@ static void skge_tx_free(struct skge_port *skge, struct skge_element *e, printk(KERN_DEBUG PFX "%s: tx done slot %td\n", skge->netdev->name, e - skge->tx_ring.start); - dev_kfree_skb_any(e->skb); + dev_kfree_skb(e->skb); } e->skb = NULL; } /* Free all buffers in transmit ring */ -static void skge_tx_clean(struct skge_port *skge) +static void skge_tx_clean(struct net_device *dev) { + struct skge_port *skge = netdev_priv(dev); struct skge_element *e; - unsigned long flags; - spin_lock_irqsave(&skge->tx_lock, flags); + netif_tx_lock_bh(dev); for (e = skge->tx_ring.to_clean; e != skge->tx_ring.to_use; e = e->next) { struct skge_tx_desc *td = e->desc; skge_tx_free(skge, e, td->control); @@ -2449,8 +2437,8 @@ static void skge_tx_clean(struct skge_port *skge) } skge->tx_ring.to_clean = e; - netif_wake_queue(skge->netdev); - spin_unlock_irqrestore(&skge->tx_lock, flags); + netif_wake_queue(dev); + netif_tx_unlock_bh(dev); } static void skge_tx_timeout(struct net_device *dev) @@ -2461,7 +2449,7 @@ static void skge_tx_timeout(struct net_device *dev) printk(KERN_DEBUG PFX "%s: tx timeout\n", dev->name); skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP); - skge_tx_clean(skge); + skge_tx_clean(dev); } static int skge_change_mtu(struct net_device *dev, int new_mtu) @@ -2584,16 +2572,17 @@ static inline int bad_phy_status(const struct skge_hw *hw, u32 status) /* Get receive buffer from descriptor. * Handles copy of small buffers and reallocation failures */ -static inline struct sk_buff *skge_rx_get(struct skge_port *skge, - struct skge_element *e, - u32 control, u32 status, u16 csum) +static struct sk_buff *skge_rx_get(struct net_device *dev, + struct skge_element *e, + u32 control, u32 status, u16 csum) { + struct skge_port *skge = netdev_priv(dev); struct sk_buff *skb; u16 len = control & BMU_BBC; if (unlikely(netif_msg_rx_status(skge))) printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n", - skge->netdev->name, e - skge->rx_ring.start, + dev->name, e - skge->rx_ring.start, status, len); if (len > skge->rx_buf_size) @@ -2609,7 +2598,7 @@ static inline struct sk_buff *skge_rx_get(struct skge_port *skge, goto error; if (len < RX_COPY_THRESHOLD) { - skb = alloc_skb(len + 2, GFP_ATOMIC); + skb = netdev_alloc_skb(dev, len + 2); if (!skb) goto resubmit; @@ -2624,7 +2613,7 @@ static inline struct sk_buff *skge_rx_get(struct skge_port *skge, skge_rx_reuse(e, skge->rx_buf_size); } else { struct sk_buff *nskb; - nskb = alloc_skb(skge->rx_buf_size + NET_IP_ALIGN, GFP_ATOMIC); + nskb = netdev_alloc_skb(dev, skge->rx_buf_size + NET_IP_ALIGN); if (!nskb) goto resubmit; @@ -2639,20 +2628,19 @@ static inline struct sk_buff *skge_rx_get(struct skge_port *skge, } skb_put(skb, len); - skb->dev = skge->netdev; if (skge->rx_csum) { skb->csum = csum; skb->ip_summed = CHECKSUM_HW; } - skb->protocol = eth_type_trans(skb, skge->netdev); + skb->protocol = eth_type_trans(skb, dev); return skb; error: if (netif_msg_rx_err(skge)) printk(KERN_DEBUG PFX "%s: rx err, slot %td control 0x%x status 0x%x\n", - skge->netdev->name, e - skge->rx_ring.start, + dev->name, e - skge->rx_ring.start, control, status); if (skge->hw->chip_id == CHIP_ID_GENESIS) { @@ -2677,15 +2665,15 @@ resubmit: } /* Free all buffers in Tx ring which are no longer owned by device */ -static void skge_txirq(struct net_device *dev) +static void skge_tx_done(struct net_device *dev) { struct skge_port *skge = netdev_priv(dev); struct skge_ring *ring = &skge->tx_ring; struct skge_element *e; - rmb(); + skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_IRQ_CL_F); - spin_lock(&skge->tx_lock); + netif_tx_lock(dev); for (e = ring->to_clean; e != ring->to_use; e = e->next) { struct skge_tx_desc *td = e->desc; @@ -2696,11 +2684,10 @@ static void skge_txirq(struct net_device *dev) } skge->tx_ring.to_clean = e; - if (netif_queue_stopped(skge->netdev) - && skge_avail(&skge->tx_ring) > TX_LOW_WATER) - netif_wake_queue(skge->netdev); + if (skge_avail(&skge->tx_ring) > TX_LOW_WATER) + netif_wake_queue(dev); - spin_unlock(&skge->tx_lock); + netif_tx_unlock(dev); } static int skge_poll(struct net_device *dev, int *budget) @@ -2712,6 +2699,10 @@ static int skge_poll(struct net_device *dev, int *budget) int to_do = min(dev->quota, *budget); int work_done = 0; + skge_tx_done(dev); + + skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_IRQ_CL_F); + for (e = ring->to_clean; prefetch(e->next), work_done < to_do; e = e->next) { struct skge_rx_desc *rd = e->desc; struct sk_buff *skb; @@ -2722,7 +2713,7 @@ static int skge_poll(struct net_device *dev, int *budget) if (control & BMU_OWN) break; - skb = skge_rx_get(skge, e, control, rd->status, rd->csum2); + skb = skge_rx_get(dev, e, control, rd->status, rd->csum2); if (likely(skb)) { dev->last_rx = jiffies; netif_receive_skb(skb); @@ -2742,12 +2733,11 @@ static int skge_poll(struct net_device *dev, int *budget) if (work_done >= to_do) return 1; /* not done */ - netif_rx_complete(dev); - spin_lock_irq(&hw->hw_lock); - hw->intr_mask |= rxirqmask[skge->port]; + __netif_rx_complete(dev); + hw->intr_mask |= irqmask[skge->port]; skge_write32(hw, B0_IMSK, hw->intr_mask); - mmiowb(); + skge_read32(hw, B0_IMSK); spin_unlock_irq(&hw->hw_lock); return 0; @@ -2881,6 +2871,7 @@ static void skge_extirq(void *arg) spin_lock_irq(&hw->hw_lock); hw->intr_mask |= IS_EXT_REG; skge_write32(hw, B0_IMSK, hw->intr_mask); + skge_read32(hw, B0_IMSK); spin_unlock_irq(&hw->hw_lock); } @@ -2888,27 +2879,23 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) { struct skge_hw *hw = dev_id; u32 status; + int handled = 0; + spin_lock(&hw->hw_lock); /* Reading this register masks IRQ */ status = skge_read32(hw, B0_SP_ISRC); - if (status == 0) - return IRQ_NONE; + if (status == 0 || status == ~0) + goto out; - spin_lock(&hw->hw_lock); + handled = 1; status &= hw->intr_mask; if (status & IS_EXT_REG) { hw->intr_mask &= ~IS_EXT_REG; schedule_work(&hw->phy_work); } - if (status & IS_XA1_F) { - skge_write8(hw, Q_ADDR(Q_XA1, Q_CSR), CSR_IRQ_CL_F); - skge_txirq(hw->dev[0]); - } - - if (status & IS_R1_F) { - skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F); - hw->intr_mask &= ~IS_R1_F; + if (status & (IS_XA1_F|IS_R1_F)) { + hw->intr_mask &= ~(IS_XA1_F|IS_R1_F); netif_rx_schedule(hw->dev[0]); } @@ -2927,14 +2914,8 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) skge_mac_intr(hw, 0); if (hw->dev[1]) { - if (status & IS_XA2_F) { - skge_write8(hw, Q_ADDR(Q_XA2, Q_CSR), CSR_IRQ_CL_F); - skge_txirq(hw->dev[1]); - } - - if (status & IS_R2_F) { - skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F); - hw->intr_mask &= ~IS_R2_F; + if (status & (IS_XA2_F|IS_R2_F)) { + hw->intr_mask &= ~(IS_XA2_F|IS_R2_F); netif_rx_schedule(hw->dev[1]); } @@ -2955,9 +2936,11 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) skge_error_irq(hw); skge_write32(hw, B0_IMSK, hw->intr_mask); + skge_read32(hw, B0_IMSK); +out: spin_unlock(&hw->hw_lock); - return IRQ_HANDLED; + return IRQ_RETVAL(handled); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -3106,7 +3089,6 @@ static int skge_reset(struct skge_hw *hw) else hw->ram_size = t8 * 4096; - spin_lock_init(&hw->hw_lock); hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1; if (hw->ports > 1) hw->intr_mask |= IS_PORT_2; @@ -3222,7 +3204,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, dev->poll_controller = skge_netpoll; #endif dev->irq = hw->pdev->irq; - dev->features = NETIF_F_LLTX; + if (highmem) dev->features |= NETIF_F_HIGHDMA; @@ -3244,8 +3226,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, skge->port = port; - spin_lock_init(&skge->tx_lock); - if (hw->chip_id != CHIP_ID_GENESIS) { dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; skge->rx_csum = 1; @@ -3332,6 +3312,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, hw->pdev = pdev; mutex_init(&hw->phy_mutex); INIT_WORK(&hw->phy_work, skge_extirq, hw); + spin_lock_init(&hw->hw_lock); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { @@ -3340,23 +3321,16 @@ static int __devinit skge_probe(struct pci_dev *pdev, goto err_out_free_hw; } - err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - goto err_out_iounmap; - } - pci_set_drvdata(pdev, hw); - err = skge_reset(hw); if (err) - goto err_out_free_irq; + goto err_out_iounmap; printk(KERN_INFO PFX DRV_VERSION " addr 0x%llx irq %d chip %s rev %d\n", (unsigned long long)pci_resource_start(pdev, 0), pdev->irq, skge_board_name(hw), hw->chip_rev); - if ((dev = skge_devinit(hw, 0, using_dac)) == NULL) + dev = skge_devinit(hw, 0, using_dac); + if (!dev) goto err_out_led_off; if (!is_valid_ether_addr(dev->dev_addr)) { @@ -3366,7 +3340,6 @@ static int __devinit skge_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "%s: cannot register net device\n", @@ -3374,6 +3347,12 @@ static int __devinit skge_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + dev->name, pdev->irq); + goto err_out_unregister; + } skge_show_addr(dev); if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) { @@ -3386,15 +3365,16 @@ static int __devinit skge_probe(struct pci_dev *pdev, free_netdev(dev1); } } + pci_set_drvdata(pdev, hw); return 0; +err_out_unregister: + unregister_netdev(dev); err_out_free_netdev: free_netdev(dev); err_out_led_off: skge_write16(hw, B0_LED, LED_STAT_OFF); -err_out_free_irq: - free_irq(pdev->irq, hw); err_out_iounmap: iounmap(hw->regs); err_out_free_hw: @@ -3424,6 +3404,7 @@ static void __devexit skge_remove(struct pci_dev *pdev) spin_lock_irq(&hw->hw_lock); hw->intr_mask = 0; skge_write32(hw, B0_IMSK, 0); + skge_read32(hw, B0_IMSK); spin_unlock_irq(&hw->hw_lock); skge_write16(hw, B0_LED, LED_STAT_OFF); @@ -3449,26 +3430,25 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state) struct skge_hw *hw = pci_get_drvdata(pdev); int i, wol = 0; - for (i = 0; i < 2; i++) { + pci_save_state(pdev); + for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; - if (dev) { + if (netif_running(dev)) { struct skge_port *skge = netdev_priv(dev); - if (netif_running(dev)) { - netif_carrier_off(dev); - if (skge->wol) - netif_stop_queue(dev); - else - skge_down(dev); - } - netif_device_detach(dev); + + netif_carrier_off(dev); + if (skge->wol) + netif_stop_queue(dev); + else + skge_down(dev); wol |= skge->wol; } + netif_device_detach(dev); } - pci_save_state(pdev); + skge_write32(hw, B0_IMSK, 0); pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); - pci_disable_device(pdev); pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; @@ -3477,23 +3457,33 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state) static int skge_resume(struct pci_dev *pdev) { struct skge_hw *hw = pci_get_drvdata(pdev); - int i; + int i, err; pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_enable_wake(pdev, PCI_D0, 0); - skge_reset(hw); + err = skge_reset(hw); + if (err) + goto out; - for (i = 0; i < 2; i++) { + for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; - if (dev) { - netif_device_attach(dev); - if (netif_running(dev) && skge_up(dev)) + + netif_device_attach(dev); + if (netif_running(dev)) { + err = skge_up(dev); + + if (err) { + printk(KERN_ERR PFX "%s: could not up: %d\n", + dev->name, err); dev_close(dev); + goto out; + } } } - return 0; +out: + return err; } #endif @@ -3510,7 +3500,7 @@ static struct pci_driver skge_driver = { static int __init skge_init_module(void) { - return pci_module_init(&skge_driver); + return pci_register_driver(&skge_driver); } static void __exit skge_cleanup_module(void) diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 593387b3c0d..79e09271bcf 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -2417,7 +2417,6 @@ struct skge_port { struct net_device *netdev; int port; - spinlock_t tx_lock; struct skge_ring tx_ring; struct skge_ring rx_ring; diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 933e87f1cc6..7ce0663baf4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.5" +#define DRV_VERSION "1.7" #define PFX DRV_NAME " " /* @@ -106,6 +106,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, @@ -117,10 +118,17 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, { 0 } }; @@ -190,7 +198,6 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) { u16 power_control; - u32 reg1; int vaux; pr_debug("sky2_set_power_state %d\n", state); @@ -223,20 +230,9 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) else sky2_write8(hw, B2_Y2_CLK_GATE, 0); - /* Turn off phy power saving */ - reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); - reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - - /* looks like this XL is back asswards .. */ - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { - reg1 |= PCI_Y2_PHY1_COMA; - if (hw->ports > 1) - reg1 |= PCI_Y2_PHY2_COMA; - } - sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - udelay(100); - if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + u32 reg1; + sky2_pci_write32(hw, PCI_DEV_REG3, 0); reg1 = sky2_pci_read32(hw, PCI_DEV_REG4); reg1 &= P_ASPM_CONTROL_MSK; @@ -248,15 +244,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) case PCI_D3hot: case PCI_D3cold: - /* Turn on phy power saving */ - reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) - reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - else - reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - udelay(100); - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) sky2_write8(hw, B2_Y2_CLK_GATE, 0); else @@ -280,7 +267,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } -static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) +static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) { u16 reg; @@ -528,6 +515,29 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); } +static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) +{ + u32 reg1; + static const u32 phy_power[] + = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; + + /* looks like this XL is back asswards .. */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + onoff = !onoff; + + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + + if (onoff) + /* Turn off phy power saving */ + reg1 &= ~phy_power[port]; + else + reg1 |= phy_power[port]; + + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + sky2_pci_read32(hw, PCI_DEV_REG1); + udelay(100); +} + /* Force a renegotiation */ static void sky2_phy_reinit(struct sky2_port *sky2) { @@ -760,9 +770,10 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) /* Update chip's next pointer */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) { + q = Y2_QADDR(q, PREF_UNIT_PUT_IDX); wmb(); - sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); - mmiowb(); + sky2_write16(hw, q, idx); + sky2_read16(hw, q); } @@ -949,14 +960,16 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) /* * It appears the hardware has a bug in the FIFO logic that * cause it to hang if the FIFO gets overrun and the receive buffer - * is not aligned. ALso alloc_skb() won't align properly if slab - * debugging is enabled. + * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is + * aligned except if slab debugging is enabled. */ -static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask) +static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev, + unsigned int length, + gfp_t gfp_mask) { struct sk_buff *skb; - skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask); + skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask); if (likely(skb)) { unsigned long p = (unsigned long) skb->data; skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); @@ -992,7 +1005,8 @@ static int sky2_rx_start(struct sky2_port *sky2) for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; - re->skb = sky2_alloc_skb(sky2->rx_bufsize, GFP_KERNEL); + re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize, + GFP_KERNEL); if (!re->skb) goto nomem; @@ -1080,6 +1094,8 @@ static int sky2_up(struct net_device *dev) if (!sky2->rx_ring) goto err_out; + sky2_phy_power(hw, port, 1); + sky2_mac_init(hw, port); /* Determine available ram buffer space (in 4K blocks). @@ -1184,7 +1200,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) struct sky2_tx_le *le = NULL; struct tx_ring_info *re; unsigned i, len; - int avail; dma_addr_t mapping; u32 addr64; u16 mss; @@ -1234,25 +1249,18 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Check for TCP Segmentation Offload */ mss = skb_shinfo(skb)->gso_size; if (mss != 0) { - /* just drop the packet if non-linear expansion fails */ - if (skb_header_cloned(skb) && - pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { - dev_kfree_skb(skb); - goto out_unlock; - } - mss += ((skb->h.th->doff - 5) * 4); /* TCP options */ mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); mss += ETH_HLEN; - } - if (mss != sky2->tx_last_mss) { - le = get_tx_le(sky2); - le->tx.tso.size = cpu_to_le16(mss); - le->tx.tso.rsvd = 0; - le->opcode = OP_LRGLEN | HW_OWNER; - le->ctrl = 0; - sky2->tx_last_mss = mss; + if (mss != sky2->tx_last_mss) { + le = get_tx_le(sky2); + le->tx.tso.size = cpu_to_le16(mss); + le->tx.tso.rsvd = 0; + le->opcode = OP_LRGLEN | HW_OWNER; + le->ctrl = 0; + sky2->tx_last_mss = mss; + } } ctrl = 0; @@ -1280,12 +1288,17 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) if (skb->nh.iph->protocol == IPPROTO_UDP) ctrl |= UDPTCP; - le = get_tx_le(sky2); - le->tx.csum.start = cpu_to_le16(hdr); - le->tx.csum.offset = cpu_to_le16(offset); - le->length = 0; /* initial checksum value */ - le->ctrl = 1; /* one packet */ - le->opcode = OP_TCPLISW | HW_OWNER; + if (hdr != sky2->tx_csum_start || offset != sky2->tx_csum_offset) { + sky2->tx_csum_start = hdr; + sky2->tx_csum_offset = offset; + + le = get_tx_le(sky2); + le->tx.csum.start = cpu_to_le16(hdr); + le->tx.csum.offset = cpu_to_le16(offset); + le->length = 0; /* initial checksum value */ + le->ctrl = 1; /* one packet */ + le->opcode = OP_TCPLISW | HW_OWNER; + } } le = get_tx_le(sky2); @@ -1320,23 +1333,18 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le->opcode = OP_BUFFER | HW_OWNER; fre = sky2->tx_ring - + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE); + + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE); pci_unmap_addr_set(fre, mapaddr, mapping); } re->idx = sky2->tx_prod; le->ctrl |= EOP; - avail = tx_avail(sky2); - if (mss != 0 || avail < TX_MIN_PENDING) { - le->ctrl |= FRC_STAT; - if (avail <= MAX_SKB_TX_LE) - netif_stop_queue(dev); - } + if (tx_avail(sky2) <= MAX_SKB_TX_LE) + netif_stop_queue(dev); sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); -out_unlock: spin_unlock(&sky2->tx_lock); dev->trans_start = jiffies; @@ -1421,7 +1429,7 @@ static int sky2_down(struct net_device *dev) /* Stop more packets from being queued */ netif_stop_queue(dev); - sky2_phy_reset(hw, port); + sky2_gmac_reset(hw, port); /* Stop transmitter */ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); @@ -1469,6 +1477,8 @@ static int sky2_down(struct net_device *dev) imask &= ~portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); + sky2_phy_power(hw, port, 0); + /* turn off LED's */ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); @@ -1832,15 +1842,16 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) * For small packets or errors, just reuse existing skb. * For larger packets, get new buffer. */ -static struct sk_buff *sky2_receive(struct sky2_port *sky2, +static struct sk_buff *sky2_receive(struct net_device *dev, u16 length, u32 status) { + struct sky2_port *sky2 = netdev_priv(dev); struct ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", - sky2->netdev->name, sky2->rx_next, status, length); + dev->name, sky2->rx_next, status, length); sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); @@ -1851,11 +1862,11 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if (length > sky2->netdev->mtu + ETH_HLEN) + if (length > dev->mtu + ETH_HLEN) goto oversize; if (length < copybreak) { - skb = alloc_skb(length + 2, GFP_ATOMIC); + skb = netdev_alloc_skb(dev, length + 2); if (!skb) goto resubmit; @@ -1870,7 +1881,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, } else { struct sk_buff *nskb; - nskb = sky2_alloc_skb(sky2->rx_bufsize, GFP_ATOMIC); + nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC); if (!nskb) goto resubmit; @@ -1900,7 +1911,7 @@ error: if (netif_msg_rx_err(sky2) && net_ratelimit()) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", - sky2->netdev->name, status, length); + dev->name, status, length); if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) sky2->net_stats.rx_length_errors++; @@ -1926,12 +1937,6 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } } -/* Is status ring empty or is there more to do? */ -static inline int sky2_more_work(const struct sky2_hw *hw) -{ - return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX)); -} - /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do) { @@ -1960,11 +1965,10 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: - skb = sky2_receive(sky2, length, status); + skb = sky2_receive(dev, length, status); if (!skb) break; - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; @@ -2022,6 +2026,9 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) } } + /* Fully processed status ring so clear irq */ + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + exit_loop: if (buf_write[0]) { sky2 = netdev_priv(hw->dev[0]); @@ -2231,19 +2238,16 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2); work_done = sky2_status_intr(hw, work_limit); - *budget -= work_done; - dev0->quota -= work_done; + if (work_done < work_limit) { + netif_rx_complete(dev0); - if (status & Y2_IS_STAT_BMU) - sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); - - if (sky2_more_work(hw)) + sky2_read32(hw, B0_Y2_SP_LISR); + return 0; + } else { + *budget -= work_done; + dev0->quota -= work_done; return 1; - - netif_rx_complete(dev0); - - sky2_read32(hw, B0_Y2_SP_LISR); - return 0; + } } static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) @@ -2409,7 +2413,7 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); for (i = 0; i < hw->ports; i++) - sky2_phy_reset(hw, i); + sky2_gmac_reset(hw, i); memset(hw->st_le, 0, STATUS_LE_BYTES); hw->st_idx = 0; @@ -3200,6 +3204,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) struct pci_dev *pdev = hw->pdev; int err; + init_waitqueue_head (&hw->msi_wait); + sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw); @@ -3209,10 +3215,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) return err; } - init_waitqueue_head (&hw->msi_wait); - sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); - wmb(); + sky2_read8(hw, B0_CTST); wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 2db8d19b22d..fa8af9f503e 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1748,7 +1748,6 @@ enum { INIT_SUM= 1<<3, LOCK_SUM= 1<<4, INS_VLAN= 1<<5, - FRC_STAT= 1<<6, EOP = 1<<7, }; @@ -1844,6 +1843,8 @@ struct sky2_port { u32 tx_addr64; u16 tx_pending; u16 tx_last_mss; + u16 tx_csum_start; + u16 tx_csum_offset; struct ring_info *rx_ring ____cacheline_aligned_in_smp; struct sky2_rx_le *rx_le; diff --git a/drivers/net/slhc.c b/drivers/net/slhc.c index 3a1b7131681..9a540e2092b 100644 --- a/drivers/net/slhc.c +++ b/drivers/net/slhc.c @@ -94,27 +94,23 @@ slhc_init(int rslots, int tslots) register struct cstate *ts; struct slcompress *comp; - comp = (struct slcompress *)kmalloc(sizeof(struct slcompress), - GFP_KERNEL); + comp = kzalloc(sizeof(struct slcompress), GFP_KERNEL); if (! comp) goto out_fail; - memset(comp, 0, sizeof(struct slcompress)); if ( rslots > 0 && rslots < 256 ) { size_t rsize = rslots * sizeof(struct cstate); - comp->rstate = (struct cstate *) kmalloc(rsize, GFP_KERNEL); + comp->rstate = kzalloc(rsize, GFP_KERNEL); if (! comp->rstate) goto out_free; - memset(comp->rstate, 0, rsize); comp->rslot_limit = rslots - 1; } if ( tslots > 0 && tslots < 256 ) { size_t tsize = tslots * sizeof(struct cstate); - comp->tstate = (struct cstate *) kmalloc(tsize, GFP_KERNEL); + comp->tstate = kzalloc(tsize, GFP_KERNEL); if (! comp->tstate) goto out_free2; - memset(comp->tstate, 0, tsize); comp->tslot_limit = tslots - 1; } @@ -141,9 +137,9 @@ slhc_init(int rslots, int tslots) return comp; out_free2: - kfree((unsigned char *)comp->rstate); + kfree(comp->rstate); out_free: - kfree((unsigned char *)comp); + kfree(comp); out_fail: return NULL; } @@ -700,20 +696,6 @@ EXPORT_SYMBOL(slhc_compress); EXPORT_SYMBOL(slhc_uncompress); EXPORT_SYMBOL(slhc_toss); -#ifdef MODULE - -int init_module(void) -{ - printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California\n"); - return 0; -} - -void cleanup_module(void) -{ - return; -} - -#endif /* MODULE */ #else /* CONFIG_INET */ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 0b15290df27..4438fe8c949 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -55,8 +55,6 @@ static const char version[] = ) #endif - -#include <linux/config.h> #include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index c0a62b00ffc..8e1f6206b7d 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -2053,7 +2053,7 @@ static int __init starfire_init (void) return -ENODEV; } - return pci_module_init (&starfire_driver); + return pci_register_driver(&starfire_driver); } diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 698568e751d..c243a80f400 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -17,6 +17,8 @@ Support and updates available at http://www.scyld.com/network/sundance.html [link no longer provides useful info -jgarzik] + Archives of the mailing list are still available at + http://www.beowulf.org/pipermail/netdrivers/ */ @@ -646,7 +648,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, /* Reset the chip to erase previous misconfiguration. */ if (netif_msg_hw(np)) printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); - iowrite16(0x00ff, ioaddr + ASICCtrl + 2); + sundance_reset(dev, 0x00ff << 16); if (netif_msg_hw(np)) printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); @@ -1075,13 +1077,8 @@ reset_tx (struct net_device *dev) /* Reset tx logic, TxListPtr will be cleaned */ iowrite16 (TxDisable, ioaddr + MACCtrl1); - iowrite16 (TxReset | DMAReset | FIFOReset | NetworkReset, - ioaddr + ASICCtrl + 2); - for (i=50; i > 0; i--) { - if ((ioread16(ioaddr + ASICCtrl + 2) & ResetBusy) == 0) - break; - mdelay(1); - } + sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16); + /* free all tx skbuff */ for (i = 0; i < TX_RING_SIZE; i++) { skb = np->tx_skbuff[i]; @@ -1736,7 +1733,7 @@ static int __init sundance_init(void) #ifdef MODULE printk(version); #endif - return pci_module_init(&sundance_driver); + return pci_register_driver(&sundance_driver); } static void __exit sundance_exit(void) diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index b70bbd74897..1a441a8a2ad 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -3194,7 +3194,7 @@ static struct pci_driver gem_driver = { static int __init gem_init(void) { - return pci_module_init(&gem_driver); + return pci_register_driver(&gem_driver); } static void __exit gem_cleanup(void) diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 8b53ded66d3..39460fa916f 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1725,7 +1725,7 @@ static struct pci_driver tc35815_driver = { static int __init tc35815_init_module(void) { - return pci_module_init(&tc35815_driver); + return pci_register_driver(&tc35815_driver); } static void __exit tc35815_cleanup_module(void) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index eafabb253f0..d6e2a6869f2 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -11819,7 +11819,7 @@ static struct pci_driver tg3_driver = { static int __init tg3_init(void) { - return pci_module_init(&tg3_driver); + return pci_register_driver(&tg3_driver); } static void __exit tg3_cleanup(void) diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index 465921e3874..412390ba142 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -1815,7 +1815,7 @@ static struct pci_driver xl_3c359_driver = { static int __init xl_pci_init (void) { - return pci_module_init (&xl_3c359_driver); + return pci_register_driver(&xl_3c359_driver); } diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c index 28d968ffd5d..0d66700c6ce 100644 --- a/drivers/net/tokenring/lanstreamer.c +++ b/drivers/net/tokenring/lanstreamer.c @@ -1998,7 +1998,7 @@ static struct pci_driver streamer_pci_driver = { }; static int __init streamer_init_module(void) { - return pci_module_init(&streamer_pci_driver); + return pci_register_driver(&streamer_pci_driver); } static void __exit streamer_cleanup_module(void) { diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 683f14b01c0..fa3a2bb105a 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/21142.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. @@ -26,9 +26,9 @@ static u16 t21142_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; /* Handle the 21143 uniquely: do autoselect with NWay, not the EEPROM list of available transceivers. */ -void t21142_timer(unsigned long data) +void t21142_media_task(void *data) { - struct net_device *dev = (struct net_device *)data; + struct net_device *dev = data; struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; int csr12 = ioread32(ioaddr + CSR12); diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index d05c5aa254e..17a2ebaef58 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -2138,17 +2138,21 @@ static int de_resume (struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata (pdev); struct de_private *de = dev->priv; + int retval = 0; rtnl_lock(); if (netif_device_present(dev)) goto out; - if (netif_running(dev)) { - pci_enable_device(pdev); - de_init_hw(de); - netif_device_attach(dev); - } else { - netif_device_attach(dev); + if (!netif_running(dev)) + goto out_attach; + if ((retval = pci_enable_device(pdev))) { + printk (KERN_ERR "%s: pci_enable_device failed in resume\n", + dev->name); + goto out; } + de_init_hw(de); +out_attach: + netif_device_attach(dev); out: rtnl_unlock(); return 0; @@ -2172,7 +2176,7 @@ static int __init de_init (void) #ifdef MODULE printk("%s", version); #endif - return pci_module_init (&de_driver); + return pci_register_driver(&de_driver); } static void __exit de_exit (void) diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 75ff14a5523..e661d0a9cc6 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -5754,7 +5754,7 @@ static int __init de4x5_module_init (void) int err = 0; #ifdef CONFIG_PCI - err = pci_module_init (&de4x5_pci_driver); + err = pci_register_driver(&de4x5_pci_driver); #endif #ifdef CONFIG_EISA err |= eisa_driver_register (&de4x5_eisa_driver); diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 4e5b0f2acc3..66dade55682 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -2039,7 +2039,7 @@ static int __init dmfe_init_module(void) if (HPNA_NoiseFloor > 15) HPNA_NoiseFloor = 0; - rc = pci_module_init(&dmfe_driver); + rc = pci_register_driver(&dmfe_driver); if (rc < 0) return rc; diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 5ffbd5b300c..206918bad53 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/eeprom.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c index 99ccf2ebb34..7f8f5d42a76 100644 --- a/drivers/net/tulip/interrupt.c +++ b/drivers/net/tulip/interrupt.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/interrupt.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index e9bc2a958c1..20bd52b8699 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/media.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c index ca7e53246ad..85a521e0d05 100644 --- a/drivers/net/tulip/pnic.c +++ b/drivers/net/tulip/pnic.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/pnic.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c index ab985023fcc..c31be0e377a 100644 --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/pnic2.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. Modified to hep support PNIC_II by Kevin B. Hendricks diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index e058a9fbfe8..066e5d6bcbd 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -1,7 +1,7 @@ /* drivers/net/tulip/timer.c - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. @@ -18,13 +18,14 @@ #include "tulip.h" -void tulip_timer(unsigned long data) +void tulip_media_task(void *data) { - struct net_device *dev = (struct net_device *)data; + struct net_device *dev = data; struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; u32 csr12 = ioread32(ioaddr + CSR12); int next_tick = 2*HZ; + unsigned long flags; if (tulip_debug > 2) { printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode" @@ -126,6 +127,15 @@ void tulip_timer(unsigned long data) } break; } + + + spin_lock_irqsave(&tp->lock, flags); + if (tp->timeout_recovery) { + tulip_tx_timeout_complete(tp, ioaddr); + tp->timeout_recovery = 0; + } + spin_unlock_irqrestore(&tp->lock, flags); + /* mod_timer synchronizes us with potential add_timer calls * from interrupts. */ diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 3bcfbf3d23e..25668ddb1f7 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -30,11 +30,10 @@ /* undefine, or define to various debugging levels (>4 == obscene levels) */ #define TULIP_DEBUG 1 -/* undefine USE_IO_OPS for MMIO, define for PIO */ #ifdef CONFIG_TULIP_MMIO -# undef USE_IO_OPS +#define TULIP_BAR 1 /* CBMA */ #else -# define USE_IO_OPS 1 +#define TULIP_BAR 0 /* CBIO */ #endif @@ -44,7 +43,8 @@ struct tulip_chip_table { int io_size; int valid_intrs; /* CSR7 interrupt enable settings */ int flags; - void (*media_timer) (unsigned long data); + void (*media_timer) (unsigned long); + void (*media_task) (void *); }; @@ -142,6 +142,7 @@ enum status_bits { RxNoBuf = 0x80, RxIntr = 0x40, TxFIFOUnderflow = 0x20, + RxErrIntr = 0x10, TxJabber = 0x08, TxNoBuf = 0x04, TxDied = 0x02, @@ -192,9 +193,14 @@ struct tulip_tx_desc { enum desc_status_bits { - DescOwned = 0x80000000, - RxDescFatalErr = 0x8000, - RxWholePkt = 0x0300, + DescOwned = 0x80000000, + DescWholePkt = 0x60000000, + DescEndPkt = 0x40000000, + DescStartPkt = 0x20000000, + DescEndRing = 0x02000000, + DescUseLink = 0x01000000, + RxDescFatalErr = 0x008000, + RxWholePkt = 0x00000300, }; @@ -366,6 +372,7 @@ struct tulip_private { unsigned int medialock:1; /* Don't sense media type. */ unsigned int mediasense:1; /* Media sensing in progress. */ unsigned int nway:1, nwayset:1; /* 21143 internal NWay. */ + unsigned int timeout_recovery:1; unsigned int csr0; /* CSR0 setting. */ unsigned int csr6; /* Current CSR6 control settings. */ unsigned char eeprom[EEPROM_SIZE]; /* Serial EEPROM contents. */ @@ -384,6 +391,7 @@ struct tulip_private { void __iomem *base_addr; int csr12_shadow; int pad0; /* Used for 8-byte alignment */ + struct work_struct media_work; }; @@ -398,7 +406,7 @@ struct eeprom_fixup { /* 21142.c */ extern u16 t21142_csr14[]; -void t21142_timer(unsigned long data); +void t21142_media_task(void *data); void t21142_start_nway(struct net_device *dev); void t21142_lnk_change(struct net_device *dev, int csr5); @@ -436,7 +444,7 @@ void pnic_lnk_change(struct net_device *dev, int csr5); void pnic_timer(unsigned long data); /* timer.c */ -void tulip_timer(unsigned long data); +void tulip_media_task(void *data); void mxic_timer(unsigned long data); void comet_timer(unsigned long data); @@ -485,4 +493,14 @@ static inline void tulip_restart_rxtx(struct tulip_private *tp) tulip_start_rxtx(tp); } +static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr) +{ + /* Stop and restart the chip's Tx processes. */ + tulip_restart_rxtx(tp); + /* Trigger an immediate transmit demand. */ + iowrite32(0, ioaddr + CSR1); + + tp->stats.tx_errors++; +} + #endif /* __NET_TULIP_H__ */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 7351831f57c..8092c4f8c03 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1,7 +1,7 @@ /* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux. */ /* - Maintained by Jeff Garzik <jgarzik@pobox.com> + Maintained by Valerie Henson <val_henson@linux.intel.com> Copyright 2000,2001 The Linux Kernel Team Written/copyright 1994-2001 by Donald Becker. @@ -130,7 +130,14 @@ int tulip_debug = TULIP_DEBUG; int tulip_debug = 1; #endif +static void tulip_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + if (netif_running(dev)) + schedule_work(&tp->media_work); +} /* * This table use during operation for capabilities and media timer. @@ -144,59 +151,60 @@ struct tulip_chip_table tulip_tbl[] = { /* DC21140 */ { "Digital DS21140 Tulip", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer }, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer, + tulip_media_task }, /* DC21142, DC21143 */ - { "Digital DS21143 Tulip", 128, 0x0801fbff, + { "Digital DS21142/43 Tulip", 128, 0x0801fbff, HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY - | HAS_INTR_MITIGATION | HAS_PCI_MWI, t21142_timer }, + | HAS_INTR_MITIGATION | HAS_PCI_MWI, tulip_timer, t21142_media_task }, /* LC82C168 */ { "Lite-On 82c168 PNIC", 256, 0x0001fbef, - HAS_MII | HAS_PNICNWAY, pnic_timer }, + HAS_MII | HAS_PNICNWAY, pnic_timer, }, /* MX98713 */ { "Macronix 98713 PMAC", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer }, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, }, /* MX98715 */ { "Macronix 98715 PMAC", 256, 0x0001ebef, - HAS_MEDIA_TABLE, mxic_timer }, + HAS_MEDIA_TABLE, mxic_timer, }, /* MX98725 */ { "Macronix 98725 PMAC", 256, 0x0001ebef, - HAS_MEDIA_TABLE, mxic_timer }, + HAS_MEDIA_TABLE, mxic_timer, }, /* AX88140 */ { "ASIX AX88140", 128, 0x0001fbff, HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY - | IS_ASIX, tulip_timer }, + | IS_ASIX, tulip_timer, tulip_media_task }, /* PNIC2 */ { "Lite-On PNIC-II", 256, 0x0801fbff, - HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer }, + HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer, }, /* COMET */ { "ADMtek Comet", 256, 0x0001abef, - HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer }, + HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer, }, /* COMPEX9881 */ { "Compex 9881 PMAC", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer }, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, }, /* I21145 */ { "Intel DS21145 Tulip", 128, 0x0801fbff, HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI - | HAS_NWAY | HAS_PCI_MWI, t21142_timer }, + | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task }, /* DM910X */ { "Davicom DM9102/DM9102A", 128, 0x0001ebef, HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, - tulip_timer }, + tulip_timer, tulip_media_task }, /* RS7112 */ { "Conexant LANfinity", 256, 0x0001ebef, - HAS_MII | HAS_ACPI, tulip_timer }, + HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task }, }; @@ -295,12 +303,14 @@ static void tulip_up(struct net_device *dev) /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ iowrite32(0x00000001, ioaddr + CSR0); + pci_read_config_dword(tp->pdev, PCI_COMMAND, &i); /* flush write */ udelay(100); /* Deassert reset. Wait the specified 50 PCI cycles after a reset by initializing Tx and Rx queues and the address filter list. */ iowrite32(tp->csr0, ioaddr + CSR0); + pci_read_config_dword(tp->pdev, PCI_COMMAND, &i); /* flush write */ udelay(100); if (tulip_debug > 1) @@ -522,20 +532,9 @@ static void tulip_tx_timeout(struct net_device *dev) "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15)); - if ( ! tp->medialock && tp->mtable) { - do - --tp->cur_index; - while (tp->cur_index >= 0 - && (tulip_media_cap[tp->mtable->mleaf[tp->cur_index].media] - & MediaIsFD)); - if (--tp->cur_index < 0) { - /* We start again, but should instead look for default. */ - tp->cur_index = tp->mtable->leafcount - 1; - } - tulip_select_media(dev, 0); - printk(KERN_WARNING "%s: transmit timed out, switching to %s " - "media.\n", dev->name, medianame[dev->if_port]); - } + tp->timeout_recovery = 1; + schedule_work(&tp->media_work); + goto out_unlock; } else if (tp->chip_id == PNIC2) { printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, " "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n", @@ -575,14 +574,9 @@ static void tulip_tx_timeout(struct net_device *dev) } #endif - /* Stop and restart the chip's Tx processes . */ - - tulip_restart_rxtx(tp); - /* Trigger an immediate transmit demand. */ - iowrite32(0, ioaddr + CSR1); - - tp->stats.tx_errors++; + tulip_tx_timeout_complete(tp, ioaddr); +out_unlock: spin_unlock_irqrestore (&tp->lock, flags); dev->trans_start = jiffies; netif_wake_queue (dev); @@ -732,6 +726,8 @@ static void tulip_down (struct net_device *dev) void __iomem *ioaddr = tp->base_addr; unsigned long flags; + flush_scheduled_work(); + del_timer_sync (&tp->timer); #ifdef CONFIG_TULIP_NAPI del_timer_sync (&tp->oom_timer); @@ -1361,11 +1357,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (pci_request_regions (pdev, "tulip")) goto err_out_free_netdev; -#ifndef USE_IO_OPS - ioaddr = pci_iomap(pdev, 1, tulip_tbl[chip_idx].io_size); -#else - ioaddr = pci_iomap(pdev, 0, tulip_tbl[chip_idx].io_size); -#endif + ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size); + if (!ioaddr) goto err_out_free_res; @@ -1398,6 +1391,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, tp->timer.data = (unsigned long)dev; tp->timer.function = tulip_tbl[tp->chip_id].media_timer; + INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task, dev); + dev->base_addr = (unsigned long)ioaddr; #ifdef CONFIG_TULIP_MWI @@ -1644,8 +1639,14 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (register_netdev(dev)) goto err_out_free_ring; - printk(KERN_INFO "%s: %s rev %d at %p,", - dev->name, chip_name, chip_rev, ioaddr); + printk(KERN_INFO "%s: %s rev %d at " +#ifdef CONFIG_TULIP_MMIO + "MMIO" +#else + "Port" +#endif + " %#llx,", dev->name, chip_name, chip_rev, + (unsigned long long) pci_resource_start(pdev, TULIP_BAR)); pci_set_drvdata(pdev, dev); if (eeprom_missing) @@ -1768,7 +1769,10 @@ static int tulip_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - pci_enable_device(pdev); + if ((retval = pci_enable_device(pdev))) { + printk (KERN_ERR "tulip: pci_enable_device failed in resume\n"); + return retval; + } if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev))) { printk (KERN_ERR "tulip: request_irq failed in resume\n"); @@ -1849,7 +1853,7 @@ static int __init tulip_init (void) tulip_max_interrupt_work = max_interrupt_work; /* probe for and init boards */ - return pci_module_init (&tulip_driver); + return pci_register_driver(&tulip_driver); } diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index fd64b2b3e99..c4c720e2d4c 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -1702,7 +1702,6 @@ MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8 static int __init uli526x_init_module(void) { - int rc; printk(version); printed_version = 1; @@ -1714,22 +1713,19 @@ static int __init uli526x_init_module(void) if (cr6set) uli526x_cr6_user_set = cr6set; - switch(mode) { + switch (mode) { case ULI526X_10MHF: case ULI526X_100MHF: case ULI526X_10MFD: case ULI526X_100MFD: uli526x_media_mode = mode; break; - default:uli526x_media_mode = ULI526X_AUTO; + default: + uli526x_media_mode = ULI526X_AUTO; break; } - rc = pci_module_init(&uli526x_driver); - if (rc < 0) - return rc; - - return 0; + return pci_register_driver(&uli526x_driver); } diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index eba9083da14..a64d6828d9a 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -90,10 +90,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; Making the Tx ring too large decreases the effectiveness of channel bonding and packet priority. There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ #define TX_QUEUE_LEN_RESTART 5 -#define RX_RING_SIZE 32 #define TX_BUFLIMIT (1024-128) @@ -137,6 +135,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; #include <asm/io.h> #include <asm/irq.h> +#include "tulip.h" + /* These identify the driver base version and may not be removed. */ static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n" @@ -242,8 +242,8 @@ static const struct pci_id_info pci_id_tbl[] __devinitdata = { }; /* This driver was written to use PCI memory space, however some x86 systems - work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space - accesses instead of memory space. */ + work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config +*/ /* Offsets to the Command and Status Registers, "CSRs". While similar to the Tulip, these registers are longword aligned. @@ -261,21 +261,11 @@ enum w840_offsets { CurTxDescAddr=0x4C, CurTxBufAddr=0x50, }; -/* Bits in the interrupt status/enable registers. */ -/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */ -enum intr_status_bits { - NormalIntr=0x10000, AbnormalIntr=0x8000, - IntrPCIErr=0x2000, TimerInt=0x800, - IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40, - TxFIFOUnderflow=0x20, RxErrIntr=0x10, - TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01, -}; - /* Bits in the NetworkConfig register. */ enum rx_mode_bits { - AcceptErr=0x80, AcceptRunt=0x40, - AcceptBroadcast=0x20, AcceptMulticast=0x10, - AcceptAllPhys=0x08, AcceptMyPhys=0x02, + AcceptErr=0x80, + RxAcceptBroadcast=0x20, AcceptMulticast=0x10, + RxAcceptAllPhys=0x08, AcceptMyPhys=0x02, }; enum mii_reg_bits { @@ -297,13 +287,6 @@ struct w840_tx_desc { u32 buffer1, buffer2; }; -/* Bits in network_desc.status */ -enum desc_status_bits { - DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000, - DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000, - DescIntr=0x80000000, -}; - #define MII_CNT 1 /* winbond only supports one MII */ struct netdev_private { struct w840_rx_desc *rx_ring; @@ -371,7 +354,6 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, int irq; int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; void __iomem *ioaddr; - int bar = 1; i = pci_enable_device(pdev); if (i) return i; @@ -393,10 +375,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, if (pci_request_regions(pdev, DRV_NAME)) goto err_out_netdev; -#ifdef USE_IO_OPS - bar = 0; -#endif - ioaddr = pci_iomap(pdev, bar, netdev_res_size); + + ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size); if (!ioaddr) goto err_out_free_res; @@ -838,7 +818,7 @@ static void init_rxtx_rings(struct net_device *dev) np->rx_buf_sz,PCI_DMA_FROMDEVICE); np->rx_ring[i].buffer1 = np->rx_addr[i]; - np->rx_ring[i].status = DescOwn; + np->rx_ring[i].status = DescOwned; } np->cur_rx = 0; @@ -923,7 +903,7 @@ static void init_registers(struct net_device *dev) } #elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) i |= 0xE000; -#elif defined(__sparc__) +#elif defined(__sparc__) || defined (CONFIG_PARISC) i |= 0x4800; #else #warning Processor architecture undefined @@ -1043,11 +1023,11 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) /* Now acquire the irq spinlock. * The difficult race is the the ordering between - * increasing np->cur_tx and setting DescOwn: + * increasing np->cur_tx and setting DescOwned: * - if np->cur_tx is increased first the interrupt * handler could consider the packet as transmitted - * since DescOwn is cleared. - * - If DescOwn is set first the NIC could report the + * since DescOwned is cleared. + * - If DescOwned is set first the NIC could report the * packet as sent, but the interrupt handler would ignore it * since the np->cur_tx was not yet increased. */ @@ -1055,7 +1035,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) np->cur_tx++; wmb(); /* flush length, buffer1, buffer2 */ - np->tx_ring[entry].status = DescOwn; + np->tx_ring[entry].status = DescOwned; wmb(); /* flush status and kick the hardware */ iowrite32(0, np->base_addr + TxStartDemand); np->tx_q_bytes += skb->len; @@ -1155,12 +1135,12 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs handled = 1; - if (intr_status & (IntrRxDone | RxNoBuf)) + if (intr_status & (RxIntr | RxNoBuf)) netdev_rx(dev); if (intr_status & RxNoBuf) iowrite32(0, ioaddr + RxStartDemand); - if (intr_status & (TxIdle | IntrTxDone) && + if (intr_status & (TxNoBuf | TxIntr) && np->cur_tx != np->dirty_tx) { spin_lock(&np->lock); netdev_tx_done(dev); @@ -1168,8 +1148,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs } /* Abnormal error summary/uncommon events handlers. */ - if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr | - TimerInt | IntrTxStopped)) + if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SytemError | + TimerInt | TxDied)) netdev_error(dev, intr_status); if (--work_limit < 0) { @@ -1305,7 +1285,7 @@ static int netdev_rx(struct net_device *dev) np->rx_ring[entry].buffer1 = np->rx_addr[entry]; } wmb(); - np->rx_ring[entry].status = DescOwn; + np->rx_ring[entry].status = DescOwned; } return 0; @@ -1342,7 +1322,7 @@ static void netdev_error(struct net_device *dev, int intr_status) dev->name, new); update_csr6(dev, new); } - if (intr_status & IntrRxDied) { /* Missed a Rx frame. */ + if (intr_status & RxDied) { /* Missed a Rx frame. */ np->stats.rx_errors++; } if (intr_status & TimerInt) { @@ -1381,13 +1361,13 @@ static u32 __set_rx_mode(struct net_device *dev) /* Unconditionally log net taps. */ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys + rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys | AcceptMyPhys; } else if ((dev->mc_count > multicast_filter_limit) || (dev->flags & IFF_ALLMULTI)) { /* Too many to match, or accept all multicasts. */ memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; } else { struct dev_mc_list *mclist; int i; @@ -1398,7 +1378,7 @@ static u32 __set_rx_mode(struct net_device *dev) filterbit &= 0x3f; mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); } - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; } iowrite32(mc_filter[0], ioaddr + MulticastFilter0); iowrite32(mc_filter[1], ioaddr + MulticastFilter1); @@ -1646,14 +1626,18 @@ static int w840_resume (struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata (pdev); struct netdev_private *np = netdev_priv(dev); + int retval = 0; rtnl_lock(); if (netif_device_present(dev)) goto out; /* device not suspended */ if (netif_running(dev)) { - pci_enable_device(pdev); - /* pci_power_on(pdev); */ - + if ((retval = pci_enable_device(pdev))) { + printk (KERN_ERR + "%s: pci_enable_device failed in resume\n", + dev->name); + goto out; + } spin_lock_irq(&np->lock); iowrite32(1, np->base_addr+PCIBusCfg); ioread32(np->base_addr+PCIBusCfg); @@ -1671,7 +1655,7 @@ static int w840_resume (struct pci_dev *pdev) } out: rtnl_unlock(); - return 0; + return retval; } #endif @@ -1689,7 +1673,7 @@ static struct pci_driver w840_driver = { static int __init w840_init(void) { printk(version); - return pci_module_init(&w840_driver); + return pci_register_driver(&w840_driver); } static void __exit w840_exit(void) diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c index 17ca7dc42e6..d797b7b2e35 100644 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ b/drivers/net/tulip/xircom_tulip_cb.c @@ -1707,7 +1707,7 @@ static int __init xircom_init(void) #ifdef MODULE printk(version); #endif - return pci_module_init(&xircom_driver); + return pci_register_driver(&xircom_driver); } diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index 4103c37172f..1014461178c 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -2660,7 +2660,7 @@ static struct pci_driver typhoon_driver = { static int __init typhoon_init(void) { - return pci_module_init(&typhoon_driver); + return pci_register_driver(&typhoon_driver); } static void __exit diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index ae971080e2e..efeb10b9c61 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -2005,7 +2005,7 @@ static int __init rhine_init(void) #ifdef MODULE printk(version); #endif - return pci_module_init(&rhine_driver); + return pci_register_driver(&rhine_driver); } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index aa9cd92f46b..e266db1518e 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2250,7 +2250,7 @@ static int __init velocity_init_module(void) int ret; velocity_register_notifier(); - ret = pci_module_init(&velocity_driver); + ret = pci_register_driver(&velocity_driver); if (ret < 0) velocity_unregister_notifier(); return ret; diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h index 496c3d59744..4665ef2c63d 100644 --- a/drivers/net/via-velocity.h +++ b/drivers/net/via-velocity.h @@ -262,25 +262,6 @@ struct velocity_rd_info { dma_addr_t skb_dma; }; -/** - * alloc_rd_info - allocate an rd info block - * - * Alocate and initialize a receive info structure used for keeping - * track of kernel side information related to each receive - * descriptor we are using - */ - -static inline struct velocity_rd_info *alloc_rd_info(void) -{ - struct velocity_rd_info *ptr; - if ((ptr = kmalloc(sizeof(struct velocity_rd_info), GFP_ATOMIC)) == NULL) - return NULL; - else { - memset(ptr, 0, sizeof(struct velocity_rd_info)); - return ptr; - } -} - /* * Used to track transmit side buffers. */ diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c index 430b1f630fb..a5e7ce1bd16 100644 --- a/drivers/net/wan/cycx_main.c +++ b/drivers/net/wan/cycx_main.c @@ -40,7 +40,6 @@ * 1998/08/08 acme Initial version. */ -#include <linux/config.h> /* OS configuration options */ #include <linux/stddef.h> /* offsetof(), etc. */ #include <linux/errno.h> /* return codes */ #include <linux/string.h> /* inline memset(), etc. */ diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 6e1ec5bf22f..73698755943 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -28,7 +28,6 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> /* for CONFIG_DLCI_COUNT */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 684af4316ff..af4d4155905 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -2062,7 +2062,7 @@ static struct pci_driver dscc4_driver = { static int __init dscc4_init_module(void) { - return pci_module_init(&dscc4_driver); + return pci_register_driver(&dscc4_driver); } static void __exit dscc4_cleanup_module(void) diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 3705db04a34..564351aafa4 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2697,7 +2697,7 @@ fst_init(void) for (i = 0; i < FST_MAX_CARDS; i++) fst_card_array[i] = NULL; spin_lock_init(&fst_work_q_lock); - return pci_module_init(&fst_driver); + return pci_register_driver(&fst_driver); } static void __exit diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 39f44241a72..7b5d81deb02 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -1790,7 +1790,7 @@ static struct pci_driver lmc_driver = { static int __init init_lmc(void) { - return pci_module_init(&lmc_driver); + return pci_register_driver(&lmc_driver); } static void __exit exit_lmc(void) diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 567effff4a3..56e69403d17 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -3677,7 +3677,7 @@ static struct pci_driver cpc_driver = { static int __init cpc_init(void) { - return pci_module_init(&cpc_driver); + return pci_register_driver(&cpc_driver); } static void __exit cpc_cleanup_module(void) diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index 4df61fa3214..a6b9c33b68e 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -476,7 +476,7 @@ static int __init pci200_init_module(void) printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n"); return -EINVAL; } - return pci_module_init(&pci200_pci_driver); + return pci_register_driver(&pci200_pci_driver); } diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index 7628c2d81f4..0ba018f8382 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -32,7 +32,6 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> /* for CONFIG_DLCI_MAX */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c index b2031dfc4bb..ec68f7dfd93 100644 --- a/drivers/net/wan/wanxl.c +++ b/drivers/net/wan/wanxl.c @@ -837,7 +837,7 @@ static int __init wanxl_init_module(void) #ifdef MODULE printk(KERN_INFO "%s\n", version); #endif - return pci_module_init(&wanxl_pci_driver); + return pci_register_driver(&wanxl_pci_driver); } static void __exit wanxl_cleanup_module(void) diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c index d425c3cefde..3bfa791c323 100644 --- a/drivers/net/wireless/atmel_pci.c +++ b/drivers/net/wireless/atmel_pci.c @@ -76,7 +76,7 @@ static void __devexit atmel_pci_remove(struct pci_dev *pdev) static int __init atmel_init_module(void) { - return pci_module_init(&atmel_driver); + return pci_register_driver(&atmel_driver); } static void __exit atmel_cleanup_module(void) diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 5d5dab6a209..d2db8eb412c 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -6532,7 +6532,7 @@ static int __init ipw2100_init(void) printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION); printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); - ret = pci_module_init(&ipw2100_pci_driver); + ret = pci_register_driver(&ipw2100_pci_driver); #ifdef CONFIG_IPW2100_DEBUG ipw2100_debug_level = debug; diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index fa245f126c8..f29ec0ebed2 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -11788,7 +11788,7 @@ static int __init ipw_init(void) printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); - ret = pci_module_init(&ipw_driver); + ret = pci_register_driver(&ipw_driver); if (ret) { IPW_ERROR("Unable to initialize PCI module\n"); return ret; diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index bf05b907747..eaf3d13b851 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -304,7 +304,7 @@ MODULE_LICENSE("Dual MPL/GPL"); static int __init orinoco_nortel_init(void) { printk(KERN_DEBUG "%s\n", version); - return pci_module_init(&orinoco_nortel_driver); + return pci_register_driver(&orinoco_nortel_driver); } static void __exit orinoco_nortel_exit(void) diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c index 1759c543fbe..97a8b4ff32b 100644 --- a/drivers/net/wireless/orinoco_pci.c +++ b/drivers/net/wireless/orinoco_pci.c @@ -244,7 +244,7 @@ MODULE_LICENSE("Dual MPL/GPL"); static int __init orinoco_pci_init(void) { printk(KERN_DEBUG "%s\n", version); - return pci_module_init(&orinoco_pci_driver); + return pci_register_driver(&orinoco_pci_driver); } static void __exit orinoco_pci_exit(void) diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c index 7f006f62417..31162ac25a9 100644 --- a/drivers/net/wireless/orinoco_plx.c +++ b/drivers/net/wireless/orinoco_plx.c @@ -351,7 +351,7 @@ MODULE_LICENSE("Dual MPL/GPL"); static int __init orinoco_plx_init(void) { printk(KERN_DEBUG "%s\n", version); - return pci_module_init(&orinoco_plx_driver); + return pci_register_driver(&orinoco_plx_driver); } static void __exit orinoco_plx_exit(void) diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c index 0831721e4d6..7c7b960c91d 100644 --- a/drivers/net/wireless/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco_tmd.c @@ -228,7 +228,7 @@ MODULE_LICENSE("Dual MPL/GPL"); static int __init orinoco_tmd_init(void) { printk(KERN_DEBUG "%s\n", version); - return pci_module_init(&orinoco_tmd_driver); + return pci_register_driver(&orinoco_tmd_driver); } static void __exit orinoco_tmd_exit(void) diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index 09fc17a0f02..f692dccf0d0 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -313,7 +313,7 @@ prism54_module_init(void) __bug_on_wrong_struct_sizes (); - return pci_module_init(&prism54_driver); + return pci_register_driver(&prism54_driver); } /* by the time prism54_module_exit() terminates, as a postcondition diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index 8459a18254a..b6b24743370 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -1434,7 +1434,7 @@ static int __init yellowfin_init (void) #ifdef MODULE printk(version); #endif - return pci_module_init (&yellowfin_driver); + return pci_register_driver(&yellowfin_driver); } diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 2d20caf377f..a9bb3cb7e89 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -123,7 +123,8 @@ enum { ich6_sata = 4, ich6_sata_ahci = 5, ich6m_sata_ahci = 6, - ich8_sata_ahci = 7, + ich7m_sata_ahci = 7, + ich8_sata_ahci = 8, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -188,7 +189,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci }, /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ @@ -336,6 +337,24 @@ static const struct piix_map_db ich6m_map_db = { }, }; +static const struct piix_map_db ich7m_map_db = { + .mask = 0x3, + .port_enable = 0x5, + .present_shift = 4, + + /* Map 01b isn't specified in the doc but some notebooks use + * it anyway. ATM, the only case spotted carries subsystem ID + * 1025:0107. This is the only difference from ich6m. + */ + .map = { + /* PM PS SM SS MAP */ + { P0, P2, RV, RV }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + static const struct piix_map_db ich8_map_db = { .mask = 0x3, .port_enable = 0x3, @@ -355,6 +374,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, + [ich7m_sata_ahci] = &ich7m_map_db, [ich8_sata_ahci] = &ich8_map_db, }; @@ -444,6 +464,18 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, + /* ich7m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + /* ich8_sata_ahci */ { .sht = &piix_sht, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 1053c7c76b7..fa38a413d16 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1961,8 +1961,7 @@ comreset_retry: timeout = jiffies + msecs_to_jiffies(200); do { sata_scr_read(ap, SCR_STATUS, &sstatus); - sstatus &= 0x3; - if ((sstatus == 3) || (sstatus == 0)) + if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; __msleep(1, can_sleep); diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 01d40369a8a..a3727af8b9c 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -77,6 +77,7 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void vt6420_error_handler(struct ata_port *ap); static const struct pci_device_id svia_pci_tbl[] = { + { 0x1106, 0x0591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index acb24c6219d..a2c56b2de58 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1444,7 +1444,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_GTCO_402 0x0402 #define USB_DEVICE_ID_GTCO_403 0x0403 #define USB_DEVICE_ID_GTCO_404 0x0404 -#define USB_DEVICE_ID_GTCO_404 0x0405 +#define USB_DEVICE_ID_GTCO_405 0x0405 #define USB_DEVICE_ID_GTCO_500 0x0500 #define USB_DEVICE_ID_GTCO_501 0x0501 #define USB_DEVICE_ID_GTCO_502 0x0502 @@ -1657,7 +1657,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 3b175aa482c..a338bf4c2d7 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) { *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); - *x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); *press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F); *touch = ~pkt[7] & 0x20; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 738bd7c7451..e16582f3733 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf) static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, + { USB_DEVICE(0x0711, 0x0901) }, + { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 15945e806f0..c6115aa1b44 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -506,6 +506,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 8888cd80a49..77299996f7e 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -467,6 +467,11 @@ #define TESTO_VID 0x128D #define TESTO_USB_INTERFACE_PID 0x0001 +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h index 5675b1796b5..40e8e270d33 100644 --- a/include/asm-arm/arch-s3c2410/anubis-cpld.h +++ b/include/asm-arm/arch-s3c2410/anubis-cpld.h @@ -9,9 +9,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * */ #ifndef __ASM_ARCH_ANUBISCPLD_H diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h index 82f15dbd97e..4b5f423779d 100644 --- a/include/asm-arm/arch-s3c2410/anubis-irq.h +++ b/include/asm-arm/arch-s3c2410/anubis-irq.h @@ -9,9 +9,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - */ +*/ #ifndef __ASM_ARCH_ANUBISIRQ_H #define __ASM_ARCH_ANUBISIRQ_H diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h index d529ffda859..058a2104b03 100644 --- a/include/asm-arm/arch-s3c2410/anubis-map.h +++ b/include/asm-arm/arch-s3c2410/anubis-map.h @@ -9,8 +9,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: */ /* needs arch/map.h including with this */ diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h index 0d276e67f2f..7e0222276c9 100644 --- a/include/asm-arm/arch-s3c2410/audio.h +++ b/include/asm-arm/arch-s3c2410/audio.h @@ -9,10 +9,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 20-Nov-2004 BJD Created file - * 07-Mar-2005 BJD Added suspend/resume calls */ #ifndef __ASM_ARCH_AUDIO_H diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h index e28ca51a497..8969cffe83f 100644 --- a/include/asm-arm/arch-s3c2410/bast-cpld.h +++ b/include/asm-arm/arch-s3c2410/bast-cpld.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 25-May-2003 BJD Created file, added CTRL1 registers - * 30-Aug-2004 BJD Updated definitions from 2.4.26 port - * 30-Aug-2004 BJD Added CTRL3 and CTRL4 definitions */ #ifndef __ASM_ARCH_BASTCPLD_H diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h index b79b47f0d12..15ffa66f501 100644 --- a/include/asm-arm/arch-s3c2410/bast-irq.h +++ b/include/asm-arm/arch-s3c2410/bast-irq.h @@ -8,11 +8,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 14-Sep-2004 BJD Fixed IRQ_USBOC definition - * 06-Jan-2003 BJD Linux 2.6.0 version - */ +*/ #ifndef __ASM_ARCH_BASTIRQ_H #define __ASM_ARCH_BASTIRQ_H diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h index 29c07e302b0..727cef84c70 100644 --- a/include/asm-arm/arch-s3c2410/bast-map.h +++ b/include/asm-arm/arch-s3c2410/bast-map.h @@ -8,10 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics from arch/map.h - * 12-Mar-2004 BJD Fixed header include protection */ /* needs arch/map.h including with this */ diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h index 758c5c59d4b..82836027f00 100644 --- a/include/asm-arm/arch-s3c2410/bast-pmu.h +++ b/include/asm-arm/arch-s3c2410/bast-pmu.h @@ -9,9 +9,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 08-Oct-2003 BJD Initial creation */ #ifndef __ASM_ARCH_BASTPMU_H diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index b7d15d12545..93064860e0e 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -10,9 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Modifications: - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA */ #include <asm/arch/map.h> diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h index 4790491ba9d..71161797bc8 100644 --- a/include/asm-arm/arch-s3c2410/fb.h +++ b/include/asm-arm/arch-s3c2410/fb.h @@ -7,13 +7,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * - * Changelog: - * 07-Sep-2004 RTP Created file - * 03-Nov-2004 BJD Updated and minor cleanups - * 03-Aug-2005 RTP Renamed to fb.h - * 26-Oct-2005 BJD Changed name of platdata init */ #ifndef __ASM_ARM_FB_H diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index a2330bf8369..871f8af09b8 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 21-May-2003 BJD Created file - * 06-Jun-2003 BJD Added CPU frequency settings - * 03-Sep-2003 BJD Linux v2.6 support - * 12-Mar-2004 BJD Fixed include protection, fixed type of clock vars - * 14-Sep-2004 BJD Added misccr and getpin to gpio - * 01-Oct-2004 BJD Added the new gpio functions - * 16-Oct-2004 BJD Removed the clock variables - * 15-Jan-2006 LCVR Added s3c2400_gpio_getirq() */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h index 749227c0957..eed450608f9 100644 --- a/include/asm-arm/arch-s3c2410/idle.h +++ b/include/asm-arm/arch-s3c2410/idle.h @@ -8,10 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 CPU Idle controls - * - * Changelog: - * 28-Oct-2004 BJD Initial version - * */ #ifndef __ASM_ARCH_IDLE_H diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h index 518547f6d7a..ed3d6c7bf6d 100644 --- a/include/asm-arm/arch-s3c2410/iic.h +++ b/include/asm-arm/arch-s3c2410/iic.h @@ -8,10 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 05-Oct-2004 BJD Created file - * 19-Oct-2004 BJD Updated for s3c2440 */ #ifndef __ASM_ARCH_IIC_H diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h index 16fbc8afffd..6b35a4f2630 100644 --- a/include/asm-arm/arch-s3c2410/io.h +++ b/include/asm-arm/arch-s3c2410/io.h @@ -4,13 +4,7 @@ * * Copyright (C) 1997 Russell King * (C) 2003 Simtec Electronics - * - * Modifications: - * 06-Dec-1997 RMK Created. - * 02-Sep-2003 BJD Modified for S3C2410 - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 13-Oct-2005 BJD Fixed problems with LDRH/STRH offset range - */ +*/ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h index d9773d69726..39a69829d16 100644 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ b/include/asm-arm/arch-s3c2410/irqs.h @@ -6,14 +6,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 12-May-2003 BJD Created file - * 08-Jan-2003 BJD Linux 2.6.0 version, moved BAST bits out - * 12-Mar-2004 BJD Fixed bug in header protection - * 10-Feb-2005 BJD Added camera IRQ from guillaume.gourat@nexvision.tv - * 28-Feb-2005 BJD Updated s3c2440 IRQs - */ +*/ #ifndef __ASM_ARCH_IRQS_H diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index fae2766ff32..27ba0ac3fdd 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -8,13 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 12-May-2003 BJD Created file - * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out - * 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv - * 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names - * 15-Jan-2006 LCVR Added S3C24XX_PA macros for common S3C24XX resources */ #ifndef __ASM_ARCH_MAP_H diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h index 6ab834a14c8..4be6a74c430 100644 --- a/include/asm-arm/arch-s3c2410/memory.h +++ b/include/asm-arm/arch-s3c2410/memory.h @@ -1,6 +1,4 @@ -/* - * linux/include/asm-arm/arch-s3c2410/memory.h - * +/* linux/include/asm-arm/arch-s3c2410/memory.h * from linux/include/asm-arm/arch-rpc/memory.h * * Copyright (C) 1996,1997,1998 Russell King. @@ -8,16 +6,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 11-Jan-1998 RMK Uninlined to reduce hits on cache - * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Added TASK_SIZE and PAGE_OFFSET - * 05-Apr-2004 BJD Copied and altered for arch-s3c2410 - * 17-Mar-2005 LCVR Modified for S3C2400 */ #ifndef __ASM_ARCH_MEMORY_H diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h index 9148ac045b0..e350ae2acfc 100644 --- a/include/asm-arm/arch-s3c2410/nand.h +++ b/include/asm-arm/arch-s3c2410/nand.h @@ -8,9 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 23-Sep-2004 BJD Created file */ /* struct s3c2410_nand_set diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h index 7c4b0cd2d14..e2d406218ae 100644 --- a/include/asm-arm/arch-s3c2410/osiris-map.h +++ b/include/asm-arm/arch-s3c2410/osiris-map.h @@ -9,8 +9,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: */ /* needs arch/map.h including with this */ diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h index 15bfc2f5754..c7b90b3ecc9 100644 --- a/include/asm-arm/arch-s3c2410/regs-adc.h +++ b/include/asm-arm/arch-s3c2410/regs-adc.h @@ -7,9 +7,6 @@ * published by the Free Software Foundation. * * S3C2410 ADC registers - * - * Changelog: - * 27-09-2004 SAH Created file */ #ifndef __ASM_ARCH_REGS_ADC_H diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index a7c61feb843..b2f4690c079 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -8,18 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 clock register definitions - * - * Changelog: - * 18-Aug-2004 Ben Dooks Added 2440 definitions - * 08-Aug-2004 Herbert Pötzl Added CLKCON definitions - * 19-06-2003 Ben Dooks Created file - * 12-03-2004 Ben Dooks Updated include protection - * 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion - * 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat) - * 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA - * 27-Aug-2005 Ben Dooks Add clock-slow info - * 20-Oct-2005 Ben Dooks Fixed overflow in PLL (Guillaume Gourat) - * 20-Oct-2005 Ben Dooks Add masks for DCLK (Guillaume Gourat) */ #ifndef __ASM_ARM_REGS_CLOCK diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 6dd17f0f84e..93c49432db9 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -8,21 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 GPIO register definitions - * - * Changelog: - * 19-06-2003 BJD Created file - * 23-06-2003 BJD Updated GSTATUS registers - * 12-03-2004 BJD Updated include protection - * 20-07-2004 BJD Added GPIO pin numbers, added Port A definitions - * 04-10-2004 BJD Fixed number of bugs, added EXT IRQ filter defs - * 17-10-2004 BJD Added GSTATUS1 register definitions - * 18-11-2004 BJD Fixed definitions of GPE3, GPE4, GPE5 and GPE6 - * 18-11-2004 BJD Added S3C2440 AC97 controls - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 28-Mar-2005 LCVR Fixed definition of GPB10 - * 26-Oct-2005 BJD Added generic configuration types - * 27-Nov-2005 LCVR Added definitions to S3C2400 registers - * 15-Jan-2006 LCVR Written S3C24XX_GPIO_BASE() macro */ diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h index 18edae50d0b..91cefa26049 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h @@ -8,10 +8,6 @@ * published by the Free Software Foundation. * * S3C2440 GPIO J register definitions - * - * Changelog: - * 11-Aug-2004 BJD Created file - * 10-Feb-2005 BJD Fix GPJ12 definition (Guillaume Gourat) */ diff --git a/include/asm-arm/arch-s3c2410/regs-iic.h b/include/asm-arm/arch-s3c2410/regs-iic.h index fed3288e204..2ae29522f25 100644 --- a/include/asm-arm/arch-s3c2410/regs-iic.h +++ b/include/asm-arm/arch-s3c2410/regs-iic.h @@ -8,10 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 I2C Controller - * - * Changelog: - * 03-Oct-2004 BJD Initial include for Linux - * 08-Nov-2004 BJD Added S3C2440 filter register */ #ifndef __ASM_ARCH_REGS_IIC_H diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h index 7fdde9b91cb..72cd2509822 100644 --- a/include/asm-arm/arch-s3c2410/regs-iis.h +++ b/include/asm-arm/arch-s3c2410/regs-iis.h @@ -8,17 +8,7 @@ * published by the Free Software Foundation. * * S3C2410 IIS register definition - * - * Changelog: - * 19-06-2003 BJD Created file - * 26-06-2003 BJD Finished off definitions for register addresses - * 12-03-2004 BJD Updated include protection - * 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL - * 05-04-2005 LCVR Added IISFCON definitions for the S3C2400 - * 18-07-2005 DA Change IISCON_MPLL to IISMOD_MPLL - * Correct IISMOD_256FS and IISMOD_384FS - * Add IISCON_PSCEN - */ +*/ #ifndef __ASM_ARCH_REGS_IIS_H #define __ASM_ARCH_REGS_IIS_H diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h index 572fca5d9ac..29fb8ef670f 100644 --- a/include/asm-arm/arch-s3c2410/regs-irq.h +++ b/include/asm-arm/arch-s3c2410/regs-irq.h @@ -6,14 +6,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * - * - * Changelog: - * 19-06-2003 BJD Created file - * 12-03-2004 BJD Updated include protection - * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - */ +*/ #ifndef ___ASM_ARCH_REGS_IRQ_H diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h index b6b1b4e8bbe..b306d6e3135 100644 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -6,14 +6,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * - * - * Changelog: - * 12-06-2003 BJD Created file - * 26-06-2003 BJD Updated LCDCON register definitions - * 12-03-2004 BJD Updated include protection - * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA */ diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h index a2d7d0cec04..375dca50364 100644 --- a/include/asm-arm/arch-s3c2410/regs-mem.h +++ b/include/asm-arm/arch-s3c2410/regs-mem.h @@ -8,12 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 Memory Control register definitions - * - * Changelog: - * 29-Sep-2004 BJD Initial include for Linux - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 04-Apr-2005 LCVR Added S3C2400 DRAM/BANKSIZE_MASK definitions - * */ #ifndef __ASM_ARM_MEMREGS_H diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h index c1470c695c3..b824d371ae0 100644 --- a/include/asm-arm/arch-s3c2410/regs-nand.h +++ b/include/asm-arm/arch-s3c2410/regs-nand.h @@ -8,10 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 NAND register definitions - * - * Changelog: - * 18-Aug-2004 BJD Copied file from 2.4 and updated - * 01-May-2005 BJD Added definitions for s3c2440 controller */ #ifndef __ASM_ARM_REGS_NAND diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h index 0fbec07bb6b..cd88fd634d1 100644 --- a/include/asm-arm/arch-s3c2410/regs-rtc.h +++ b/include/asm-arm/arch-s3c2410/regs-rtc.h @@ -8,11 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 Internal RTC register definition - * - * Changelog: - * 19-06-2003 BJD Created file - * 12-03-2004 BJD Updated include protection - * 15-01-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support) */ #ifndef __ASM_ARCH_REGS_RTC_H diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h index ca9a26fbece..06e716e5b46 100644 --- a/include/asm-arm/arch-s3c2410/regs-sdi.h +++ b/include/asm-arm/arch-s3c2410/regs-sdi.h @@ -8,11 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 MMC/SDIO register definitions - * - * Changelog: - * 18-Aug-2004 Ben Dooks Created initial file - * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates - * 29-Nov-2004 Ben Dooks Updated Koen's patch */ #ifndef __ASM_ARM_REGS_SDI diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h index 93f651ae296..19c77da9c3f 100644 --- a/include/asm-arm/arch-s3c2410/regs-serial.h +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -27,10 +27,7 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Modifications: - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support) - */ +*/ #ifndef __ASM_ARM_REGS_SERIAL_H #define __ASM_ARM_REGS_SERIAL_H diff --git a/include/asm-arm/arch-s3c2410/regs-spi.h b/include/asm-arm/arch-s3c2410/regs-spi.h index 338217858c7..3552280d1e8 100644 --- a/include/asm-arm/arch-s3c2410/regs-spi.h +++ b/include/asm-arm/arch-s3c2410/regs-spi.h @@ -7,13 +7,7 @@ * published by the Free Software Foundation. * * S3C2410 SPI register definition - * - * Changelog: - * 20-04-2004 KF Created file - * 04-10-2004 BJD Removed VA address (no longer mapped) - * tidied file for submission - * 03-04-2005 LCVR Added S3C2400_SPPIN_nCS definition - */ +*/ #ifndef __ASM_ARCH_REGS_SPI_H #define __ASM_ARCH_REGS_SPI_H diff --git a/include/asm-arm/arch-s3c2410/regs-timer.h b/include/asm-arm/arch-s3c2410/regs-timer.h index 169064e2752..731918e7783 100644 --- a/include/asm-arm/arch-s3c2410/regs-timer.h +++ b/include/asm-arm/arch-s3c2410/regs-timer.h @@ -8,13 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 Timer configuration - * - * Changelog: - * 05-06-2003 BJD Created file - * 26-06-2003 BJD Added more timer definitions to mux / control - * 12-03-2004 BJD Updated include protection - * 10-02-2005 BJD Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat) - * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA */ diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h index bf315b76325..3aa31a27da1 100644 --- a/include/asm-arm/arch-s3c2410/regs-udc.h +++ b/include/asm-arm/arch-s3c2410/regs-udc.h @@ -6,13 +6,7 @@ * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. - * - * Changelog: - * 01-08-2004 Initial creation - * 12-09-2004 Cleanup for submission - * 24-10-2004 Fixed S3C2410_UDC_MAXP_REG definition - * 10-03-2005 Changed S3C2410_VA to S3C24XX_VA - */ +*/ #ifndef __ASM_ARCH_REGS_UDC_H #define __ASM_ARCH_REGS_UDC_H diff --git a/include/asm-arm/arch-s3c2410/regs-watchdog.h b/include/asm-arm/arch-s3c2410/regs-watchdog.h index d199ca6aff2..f4fff448c7b 100644 --- a/include/asm-arm/arch-s3c2410/regs-watchdog.h +++ b/include/asm-arm/arch-s3c2410/regs-watchdog.h @@ -1,4 +1,4 @@ -/* linux/include/asm/arch-s3c2410/regs0watchdog.h +/* linux/include/asm/arch-s3c2410/regs-watchdog.h * * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ @@ -8,11 +8,6 @@ * published by the Free Software Foundation. * * S3C2410 Watchdog timer control - * - * Changelog: - * 21-06-2003 BJD Created file - * 12-03-2004 BJD Updated include protection - * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA */ diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 9b0d85024cb..718246d8595 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -8,14 +8,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 12-May-2003 BJD Created file - * 14-May-2003 BJD Removed idle to aid debugging - * 12-Jun-2003 BJD Added reset via watchdog - * 04-Sep-2003 BJD Moved to v2.6 - * 28-Oct-2004 BJD Added over-ride for idle, and fixed reset panic() - */ +*/ #include <asm/hardware.h> #include <asm/io.h> diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h index 3558a3a750b..703c337c561 100644 --- a/include/asm-arm/arch-s3c2410/timex.h +++ b/include/asm-arm/arch-s3c2410/timex.h @@ -8,12 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 02-Sep-2003 BJD Created file - * 05-Jan-2004 BJD Updated for Linux 2.6.0 - * 22-Nov-2004 BJD Fixed CLOCK_TICK_RATE - * 10-Jan-2004 BJD Removed s3c2410_clock_tick_rate */ #ifndef __ASM_ARCH_TIMEX_H diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 8e152a05e53..81b3e91c56a 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -8,15 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 22-May-2003 BJD Created - * 08-Sep-2003 BJD Moved to linux v2.6 - * 12-Mar-2004 BJD Updated header protection - * 12-Oct-2004 BJD Take account of debug uart configuration - * 15-Nov-2004 BJD Fixed uart configuration - * 22-Feb-2005 BJD Added watchdog to uncompress - * 04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1) */ #ifndef __ASM_ARCH_UNCOMPRESS_H diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h index bd43b566db3..35723569a17 100644 --- a/include/asm-arm/arch-s3c2410/usb-control.h +++ b/include/asm-arm/arch-s3c2410/usb-control.h @@ -8,11 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 11-Sep-2004 BJD Created file - * 21-Sep-2004 BJD Updated port info - * 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc */ #ifndef __ASM_ARCH_USBCONTROL_H diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h index 33963cd5461..0ae3bdb7e03 100644 --- a/include/asm-arm/arch-s3c2410/vmalloc.h +++ b/include/asm-arm/arch-s3c2410/vmalloc.h @@ -10,11 +10,7 @@ * published by the Free Software Foundation. * * S3C2410 vmalloc definition - * - * Changelog: - * 12-Mar-2004 BJD Fixed header, added include protection - * 12=Mar-2004 BJD Fixed VMALLOC_END definitions - */ +*/ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h index 0ee373ac60d..a341b1e1bd9 100644 --- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h +++ b/include/asm-arm/arch-s3c2410/vr1000-cpld.h @@ -8,10 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 25-May-2003 BJD Created file, added CTRL1 registers - * 19-Mar-2004 BJD Added VR1000 CPLD definitions */ #ifndef __ASM_ARCH_VR1000CPLD_H diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h index 694f7715d2d..c39a0ffa670 100644 --- a/include/asm-arm/arch-s3c2410/vr1000-irq.h +++ b/include/asm-arm/arch-s3c2410/vr1000-irq.h @@ -8,11 +8,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 06-Jan-2003 BJD Linux 2.6.0 version - * 19-Mar-2004 BJD Updates for VR1000 - */ +*/ #ifndef __ASM_ARCH_VR1000IRQ_H #define __ASM_ARCH_VR1000IRQ_H diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h index 867c9355fd3..1fe4db36c83 100644 --- a/include/asm-arm/arch-s3c2410/vr1000-map.h +++ b/include/asm-arm/arch-s3c2410/vr1000-map.h @@ -8,12 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 06-Jan-2003 BJD Linux 2.6.0 version, split specifics from arch/map.h - * 12-Mar-2004 BJD Fixed header include protection - * 19-Mar-2004 BJD Copied to VR1000 machine headers. - * 19-Jan-2005 BJD Updated map definitions */ /* needs arch/map.h including with this */ diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h index e2f1d75171d..01b7c26a303 100644 --- a/include/asm-arm/spinlock.h +++ b/include/asm-arm/spinlock.h @@ -201,7 +201,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw) static inline int __raw_read_trylock(raw_rwlock_t *rw) { - unsigned long tmp tmp2 = 1; + unsigned long tmp, tmp2 = 1; __asm__ __volatile__( "1: ldrex %0, [%2]\n" diff --git a/include/asm-generic/audit_read.h b/include/asm-generic/audit_read.h new file mode 100644 index 00000000000..0e87464d984 --- /dev/null +++ b/include/asm-generic/audit_read.h @@ -0,0 +1,8 @@ +__NR_readlink, +__NR_quotactl, +__NR_listxattr, +__NR_llistxattr, +__NR_flistxattr, +__NR_getxattr, +__NR_lgetxattr, +__NR_fgetxattr, diff --git a/include/asm-generic/audit_write.h b/include/asm-generic/audit_write.h new file mode 100644 index 00000000000..f10d367fb2a --- /dev/null +++ b/include/asm-generic/audit_write.h @@ -0,0 +1,11 @@ +#include <asm-generic/audit_dir_write.h> +__NR_acct, +__NR_swapon, +__NR_quotactl, +__NR_truncate, +#ifdef __NR_truncate64 +__NR_truncate64, +#endif +#ifdef __NR_bind +__NR_bind, /* bind can affect fs object only in one way... */ +#endif diff --git a/include/linux/audit.h b/include/linux/audit.h index 64f9f9e56ac..40a6c26294a 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -132,6 +132,10 @@ #define AUDIT_CLASS_DIR_WRITE_32 1 #define AUDIT_CLASS_CHATTR 2 #define AUDIT_CLASS_CHATTR_32 3 +#define AUDIT_CLASS_READ 4 +#define AUDIT_CLASS_READ_32 5 +#define AUDIT_CLASS_WRITE 6 +#define AUDIT_CLASS_WRITE_32 7 /* This bitmask is used to validate user input. It represents all bits that * are currently used in an audit field constant understood by the kernel. @@ -177,6 +181,7 @@ #define AUDIT_EXIT 103 #define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */ #define AUDIT_WATCH 105 +#define AUDIT_PERM 106 #define AUDIT_ARG0 200 #define AUDIT_ARG1 (AUDIT_ARG0+1) @@ -252,6 +257,11 @@ #define AUDIT_ARCH_V850 (EM_V850|__AUDIT_ARCH_LE) #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_PERM_EXEC 1 +#define AUDIT_PERM_WRITE 2 +#define AUDIT_PERM_READ 4 +#define AUDIT_PERM_ATTR 8 + struct audit_status { __u32 mask; /* Bit mask for valid entries */ __u32 enabled; /* 1 = enabled, 0 = disabled */ @@ -314,6 +324,7 @@ struct mqstat; #define AUDITSC_FAILURE 2 #define AUDITSC_RESULT(x) ( ((long)(x))<0?AUDITSC_FAILURE:AUDITSC_SUCCESS ) extern int __init audit_register_class(int class, unsigned *list); +extern int audit_classify_syscall(int abi, unsigned syscall); #ifdef CONFIG_AUDITSYSCALL /* These are defined in auditsc.c */ /* Public API */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index c1f021eddff..ba095aebedf 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -77,7 +77,7 @@ struct mmc_host { struct device *dev; struct class_device class_dev; int index; - struct mmc_host_ops *ops; + const struct mmc_host_ops *ops; unsigned int f_min; unsigned int f_max; u32 ocr_avail; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 03a14a30c46..627e2c08ce4 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -105,6 +105,8 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int, struct mmc_command *, int); +extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int); + extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card); static inline void mmc_claim_host(struct mmc_host *host) diff --git a/kernel/audit.c b/kernel/audit.c index 0a36091ed71..963fd15c962 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1028,6 +1028,9 @@ void audit_log_hex(struct audit_buffer *ab, const unsigned char *buf, struct sk_buff *skb; static const unsigned char *hex = "0123456789ABCDEF"; + if (!ab) + return; + BUG_ON(!ab->skb); skb = ab->skb; avail = skb_tailroom(skb); @@ -1060,6 +1063,9 @@ static void audit_log_n_string(struct audit_buffer *ab, size_t slen, unsigned char *ptr; struct sk_buff *skb; + if (!ab) + return; + BUG_ON(!ab->skb); skb = ab->skb; avail = skb_tailroom(skb); diff --git a/kernel/audit.h b/kernel/audit.h index 6aa33b848cf..a3370232a39 100644 --- a/kernel/audit.h +++ b/kernel/audit.h @@ -104,6 +104,7 @@ static inline int audit_hash_ino(u32 ino) return (ino & (AUDIT_INODE_BUCKETS-1)); } +extern int audit_match_class(int class, unsigned syscall); extern int audit_comparator(const u32 left, const u32 op, const u32 right); extern int audit_compare_dname_path(const char *dname, const char *path, int *dirlen); diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 6a9a5c5a4e7..a44879b0c72 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -302,6 +302,15 @@ int __init audit_register_class(int class, unsigned *list) return 0; } +int audit_match_class(int class, unsigned syscall) +{ + if (unlikely(syscall >= AUDIT_BITMASK_SIZE * sizeof(__u32))) + return 0; + if (unlikely(class >= AUDIT_SYSCALL_CLASSES || !classes[class])) + return 0; + return classes[class][AUDIT_WORD(syscall)] & AUDIT_BIT(syscall); +} + /* Common user-space to kernel rule translation. */ static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule) { @@ -404,6 +413,7 @@ static struct audit_entry *audit_rule_to_entry(struct audit_rule *rule) case AUDIT_PERS: case AUDIT_ARCH: case AUDIT_MSGTYPE: + case AUDIT_PPID: case AUDIT_DEVMAJOR: case AUDIT_DEVMINOR: case AUDIT_EXIT: @@ -413,6 +423,10 @@ static struct audit_entry *audit_rule_to_entry(struct audit_rule *rule) case AUDIT_ARG2: case AUDIT_ARG3: break; + case AUDIT_PERM: + if (f->val & ~15) + goto exit_free; + break; case AUDIT_INODE: err = audit_to_inode(&entry->rule, f); if (err) @@ -567,6 +581,10 @@ static struct audit_entry *audit_data_to_entry(struct audit_rule_data *data, entry->rule.buflen += f->val; entry->rule.filterkey = str; break; + case AUDIT_PERM: + if (f->val & ~15) + goto exit_free; + break; default: goto exit_free; } @@ -913,7 +931,7 @@ static void audit_update_watch(struct audit_parent *parent, } ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); - audit_log_format(ab, "audit updated rules specifying watch="); + audit_log_format(ab, "audit updated rules specifying path="); audit_log_untrustedstring(ab, owatch->path); audit_log_format(ab, " with dev=%u ino=%lu\n", dev, ino); audit_log_end(ab); @@ -936,19 +954,28 @@ static void audit_remove_parent_watches(struct audit_parent *parent) struct audit_watch *w, *nextw; struct audit_krule *r, *nextr; struct audit_entry *e; + struct audit_buffer *ab; mutex_lock(&audit_filter_mutex); parent->flags |= AUDIT_PARENT_INVALID; list_for_each_entry_safe(w, nextw, &parent->watches, wlist) { list_for_each_entry_safe(r, nextr, &w->rules, rlist) { e = container_of(r, struct audit_entry, rule); + + ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); + audit_log_format(ab, "audit implicitly removed rule path="); + audit_log_untrustedstring(ab, w->path); + if (r->filterkey) { + audit_log_format(ab, " key="); + audit_log_untrustedstring(ab, r->filterkey); + } else + audit_log_format(ab, " key=(null)"); + audit_log_format(ab, " list=%d", r->listnr); + audit_log_end(ab); + list_del(&r->rlist); list_del_rcu(&e->list); call_rcu(&e->rcu, audit_free_rule_rcu); - - audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE, - "audit implicitly removed rule from list=%d\n", - AUDIT_FILTER_EXIT); } audit_remove_watch(w); } diff --git a/kernel/auditsc.c b/kernel/auditsc.c index efc1b74bebf..1bd8827a010 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -209,6 +209,54 @@ struct audit_context { #endif }; +#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE]) +static inline int open_arg(int flags, int mask) +{ + int n = ACC_MODE(flags); + if (flags & (O_TRUNC | O_CREAT)) + n |= AUDIT_PERM_WRITE; + return n & mask; +} + +static int audit_match_perm(struct audit_context *ctx, int mask) +{ + unsigned n = ctx->major; + switch (audit_classify_syscall(ctx->arch, n)) { + case 0: /* native */ + if ((mask & AUDIT_PERM_WRITE) && + audit_match_class(AUDIT_CLASS_WRITE, n)) + return 1; + if ((mask & AUDIT_PERM_READ) && + audit_match_class(AUDIT_CLASS_READ, n)) + return 1; + if ((mask & AUDIT_PERM_ATTR) && + audit_match_class(AUDIT_CLASS_CHATTR, n)) + return 1; + return 0; + case 1: /* 32bit on biarch */ + if ((mask & AUDIT_PERM_WRITE) && + audit_match_class(AUDIT_CLASS_WRITE_32, n)) + return 1; + if ((mask & AUDIT_PERM_READ) && + audit_match_class(AUDIT_CLASS_READ_32, n)) + return 1; + if ((mask & AUDIT_PERM_ATTR) && + audit_match_class(AUDIT_CLASS_CHATTR_32, n)) + return 1; + return 0; + case 2: /* open */ + return mask & ACC_MODE(ctx->argv[1]); + case 3: /* openat */ + return mask & ACC_MODE(ctx->argv[2]); + case 4: /* socketcall */ + return ((mask & AUDIT_PERM_WRITE) && ctx->argv[0] == SYS_BIND); + case 5: /* execve */ + return mask & AUDIT_PERM_EXEC; + default: + return 0; + } +} + /* Determine if any context name data matches a rule's watch data */ /* Compare a task_struct with an audit_rule. Return 1 on match, 0 * otherwise. */ @@ -397,6 +445,9 @@ static int audit_filter_rules(struct task_struct *tsk, /* ignore this field for filtering */ result = 1; break; + case AUDIT_PERM: + result = audit_match_perm(ctx, f->val); + break; } if (!result) |