diff options
| -rw-r--r-- | drivers/spi/spi_mpc83xx.c | 21 |
1 files changed, 13 insertions, 8 deletions
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index 0c16a2b39b4..fe69e94043e 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -86,7 +86,7 @@ struct mpc83xx_spi { unsigned nsecs; /* (clock cycle time)/2 */ - u32 sysclk; + u32 spibrg; /* SPIBRG input clock */ u32 rx_shift; /* RX data reg shift when in qe mode */ u32 tx_shift; /* TX data reg shift when in qe mode */ @@ -169,17 +169,18 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value) regval |= SPMODE_LEN(len); - if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) { - u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64); + if ((mpc83xx_spi->spibrg / spi->max_speed_hz) >= 64) { + u8 pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 64); if (pm > 0x0f) { - printk(KERN_WARNING "MPC83xx SPI: SPICLK can't be less then a SYSCLK/1024!\n" - "Requested SPICLK is %d Hz. Will use %d Hz instead.\n", - spi->max_speed_hz, mpc83xx_spi->sysclk / 1024); + dev_err(&spi->dev, "Requested speed is too " + "low: %d Hz. Will use %d Hz instead.\n", + spi->max_speed_hz, + mpc83xx_spi->spibrg / 1024); pm = 0x0f; } regval |= SPMODE_PM(pm) | SPMODE_DIV16; } else { - u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4); + u8 pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 4); regval |= SPMODE_PM(pm); } @@ -429,13 +430,17 @@ static int __init mpc83xx_spi_probe(struct platform_device *dev) mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect; mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer; mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs; - mpc83xx_spi->sysclk = pdata->sysclk; mpc83xx_spi->activate_cs = pdata->activate_cs; mpc83xx_spi->deactivate_cs = pdata->deactivate_cs; mpc83xx_spi->qe_mode = pdata->qe_mode; mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8; mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8; + if (mpc83xx_spi->qe_mode) + mpc83xx_spi->spibrg = pdata->sysclk / 2; + else + mpc83xx_spi->spibrg = pdata->sysclk; + mpc83xx_spi->rx_shift = 0; mpc83xx_spi->tx_shift = 0; if (mpc83xx_spi->qe_mode) { |