diff options
156 files changed, 4105 insertions, 838 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5f149b030c0..653574bc19c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -238,21 +238,8 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MARKEINS - bool "NEC EMMA2RH Mark-eins" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_CPU_R5000 - help - This enables support for the R5432-based NEC Mark-eins - boards with R5500 CPU. +config MACH_EMMA + bool "NEC EMMA series based machines" config MACH_VR41XX bool "NEC VR4100 series based machines" @@ -261,6 +248,19 @@ config MACH_VR41XX select SYS_HAS_CPU_VR41XX select GENERIC_HARDIRQS_NO__DO_IRQ +config NXP_STB220 + bool "NXP STB220 board" + select SOC_PNX833X + help + Support for NXP Semiconductors STB220 Development Board. + +config NXP_STB225 + bool "NXP 225 board" + select SOC_PNX833X + select SOC_PNX8335 + help + Support for NXP Semiconductors STB225 Development Board. + config PNX8550_JBS bool "NXP PNX8550 based JBS board" select PNX8550 @@ -601,6 +601,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" +source "arch/mips/emma/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -849,6 +850,24 @@ config MIPS_RM9122 bool select SERIAL_RM9000 +config SOC_PNX833X + bool + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select DMA_NONCOHERENT + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_GPIO + select CPU_MIPSR2_IRQ_VI + +config SOC_PNX8335 + bool + select SOC_PNX833X + config PNX8550 bool select SOC_PNX8550 @@ -1092,6 +1111,16 @@ config CPU_R5432 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL +config CPU_R5500 + bool "R5500" + depends on SYS_HAS_CPU_R5500 + select CPU_HAS_LLSC + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + help + NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV + instruction set. + config CPU_R6000 bool "R6000" depends on EXPERIMENTAL @@ -1202,6 +1231,9 @@ config SYS_HAS_CPU_R5000 config SYS_HAS_CPU_R5432 bool +config SYS_HAS_CPU_R5500 + bool + config SYS_HAS_CPU_R6000 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 7f39fd8a91f..28c55f60891 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_ cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -Wa,--trap +cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ + -Wa,--trap cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ @@ -381,6 +383,14 @@ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 # load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 +# NXP STB225 +core-$(CONFIG_SOC_PNX833X) += arch/mips/nxp/pnx833x/common/ +cflags-$(CONFIG_SOC_PNX833X) += -Iarch/mips/include/asm/mach-pnx833x +libs-$(CONFIG_NXP_STB220) += arch/mips/nxp/pnx833x/stb22x/ +load-$(CONFIG_NXP_STB220) += 0xffffffff80001000 +libs-$(CONFIG_NXP_STB225) += arch/mips/nxp/pnx833x/stb22x/ +load-$(CONFIG_NXP_STB225) += 0xffffffff80001000 + # # Common NXP PNX8550 # @@ -399,14 +409,17 @@ load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 libs-$(CONFIG_PNX8550_STB810) += arch/mips/nxp/pnx8550/stb810/ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 -# NEC EMMA2RH boards # -core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/ -cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh +# Common NEC EMMAXXX +# +core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/ +cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh +# # NEC EMMA2RH Mark-eins -core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/ -load-$(CONFIG_MARKEINS) += 0xffffffff88100000 +# +core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/ +load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 # # SGI IP22 (Indy/Indigo2) diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index dc8a67efac2..5c76c6448e0 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -17,6 +17,8 @@ #include <linux/init.h> #include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1100_mmc.h> #define PORT(_base, _irq) \ { \ @@ -163,24 +165,6 @@ static struct resource au1xxx_usb_gdt_resources[] = { }, }; -static struct resource au1xxx_mmc_resources[] = { - [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - } -}; - static u64 udc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_gdt_device = { @@ -249,16 +233,79 @@ static struct platform_device au1200_lcd_device = { static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; -static struct platform_device au1xxx_mmc_device = { +extern struct au1xmmc_platform_data au1xmmc_platdata[2]; + +static struct resource au1200_mmc0_resources[] = { + [0] = { + .start = SD0_PHYS_ADDR, + .end = SD0_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_SDMS_TX0, + .end = DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_SDMS_RX0, + .end = DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device au1200_mmc0_device = { .name = "au1xxx-mmc", .id = 0, .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &au1xmmc_platdata[0], }, - .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), - .resource = au1xxx_mmc_resources, + .num_resources = ARRAY_SIZE(au1200_mmc0_resources), + .resource = au1200_mmc0_resources, }; + +#ifndef CONFIG_MIPS_DB1200 +static struct resource au1200_mmc1_resources[] = { + [0] = { + .start = SD1_PHYS_ADDR, + .end = SD1_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_SDMS_TX1, + .end = DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_SDMS_RX1, + .end = DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device au1200_mmc1_device = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &au1xmmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_resources), + .resource = au1200_mmc1_resources, +}; +#endif /* #ifndef CONFIG_MIPS_DB1200 */ #endif /* #ifdef CONFIG_SOC_AU1200 */ static struct platform_device au1x00_pcmcia_device = { @@ -296,7 +343,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, - &au1xxx_mmc_device, + &au1200_mmc0_device, +#ifndef CONFIG_MIPS_DB1200 + &au1200_mmc1_device, +#endif #endif #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, diff --git a/arch/mips/alchemy/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c index f8fb0aeac57..95303297c53 100644 --- a/arch/mips/alchemy/pb1200/platform.c +++ b/arch/mips/alchemy/pb1200/platform.c @@ -20,9 +20,90 @@ #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/leds.h> #include <linux/platform_device.h> #include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1100_mmc.h> + +static int mmc_activity; + +static void pb1200mmc0_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD0PWR; + else + bcsr->board &= ~BCSR_BOARD_SD0PWR; + + au_sync_delay(1); +} + +static int pb1200mmc0_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int pb1200mmc0_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void pb1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) { + if (++mmc_activity == 1) + bcsr->disk_leds &= ~(1 << 8); + } else { + if (--mmc_activity == 0) + bcsr->disk_leds |= (1 << 8); + } +} + +static struct led_classdev pb1200mmc_led = { + .brightness_set = pb1200_mmcled_set, +}; + +#ifndef CONFIG_MIPS_DB1200 +static void pb1200mmc1_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD1PWR; + else + bcsr->board &= ~BCSR_BOARD_SD1PWR; + + au_sync_delay(1); +} + +static int pb1200mmc1_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200mmc1_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; +} +#endif + +const struct au1xmmc_platform_data au1xmmc_platdata[2] = { + [0] = { + .set_power = pb1200mmc0_set_power, + .card_inserted = pb1200mmc0_card_inserted, + .card_readonly = pb1200mmc0_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#ifndef CONFIG_MIPS_DB1200 + [1] = { + .set_power = pb1200mmc1_set_power, + .card_inserted = pb1200mmc1_card_inserted, + .card_readonly = pb1200mmc1_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#endif +}; static struct resource ide_resources[] = { [0] = { diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig new file mode 100644 index 00000000000..d9536522cff --- /dev/null +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -0,0 +1,1149 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26 +# Sat Jul 26 09:02:59 2008 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +CONFIG_NXP_STB225=y +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_WR_PPMC is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SOC_PNX833X=y +CONFIG_SOC_PNX8335=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_128=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=128 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=y +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x18000000 +CONFIG_MTD_PHYSMAP_LEN=0x04000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PNX8XXX=y +CONFIG_SERIAL_PNX8XXX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=y +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +# CONFIG_DVB_CX24110 is not set +# CONFIG_DVB_CX24123 is not set +# CONFIG_DVB_MT312 is not set +# CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set +# CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set + +# +# DVB-T (terrestrial) frontends +# +# CONFIG_DVB_SP8870 is not set +# CONFIG_DVB_SP887X is not set +# CONFIG_DVB_CX22700 is not set +# CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set +# CONFIG_DVB_L64781 is not set +CONFIG_DVB_TDA1004X=y +# CONFIG_DVB_NXT6000 is not set +# CONFIG_DVB_MT352 is not set +# CONFIG_DVB_ZL10353 is not set +# CONFIG_DVB_DIB3000MB is not set +# CONFIG_DVB_DIB3000MC is not set +# CONFIG_DVB_DIB7000M is not set +# CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set + +# +# DVB-C (cable) frontends +# +# CONFIG_DVB_VES1820 is not set +# CONFIG_DVB_TDA10021 is not set +# CONFIG_DVB_TDA10023 is not set +# CONFIG_DVB_STV0297 is not set + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +# CONFIG_DVB_NXT200X is not set +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +# CONFIG_DVB_BCM3510 is not set +# CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set + +# +# Digital terrestrial only tuners/PLL +# +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_TUNER_DIB0070 is not set + +# +# SEC control devices for DVB-S +# +# CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set +# CONFIG_DVB_ISL6421 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_MIPS=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=m +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SAMPLES is not set +# CONFIG_KERNEL_TESTS is not set +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_PRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig new file mode 100644 index 00000000000..9669c72123c --- /dev/null +++ b/arch/mips/emma/Kconfig @@ -0,0 +1,29 @@ +choice + prompt "Machine type" + depends on MACH_EMMA + default NEC_MARKEINS + +config NEC_MARKEINS + bool "NEC EMMA2RH Mark-eins board" + select SOC_EMMA2RH + select HW_HAS_PCI + help + This enables support for the NEC Electronics Mark-eins boards. + +endchoice + +config SOC_EMMA2RH + bool + select SOC_EMMA + select SYS_HAS_CPU_R5500 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + +config SOC_EMMA + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/emma2rh/common/Makefile b/arch/mips/emma/common/Makefile index 859121b3867..c392d28c1ef 100644 --- a/arch/mips/emma2rh/common/Makefile +++ b/arch/mips/emma/common/Makefile @@ -10,4 +10,4 @@ # (at your option) any later version. # -obj-$(CONFIG_MARKEINS) += irq.o irq_emma2rh.o prom.o +obj-$(CONFIG_NEC_MARKEINS) += prom.o diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma/common/prom.c index e14a2e3d884..120f53fbdb4 100644 --- a/arch/mips/emma2rh/common/prom.c +++ b/arch/mips/emma/common/prom.c @@ -29,11 +29,11 @@ #include <asm/addrspace.h> #include <asm/bootinfo.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> const char *get_system_type(void) { -#if defined(CONFIG_MARKEINS) +#ifdef CONFIG_NEC_MARKEINS return "NEC EMMA2RH Mark-eins"; #else #error Unknown NEC board @@ -60,7 +60,7 @@ void __init prom_init(void) strcat(arcs_cmdline, " "); } -#if defined(CONFIG_MARKEINS) +#ifdef CONFIG_NEC_MARKEINS add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); #else #error Unknown NEC board diff --git a/arch/mips/emma2rh/markeins/Makefile b/arch/mips/emma/markeins/Makefile index 14fc268b175..16e0017ba91 100644 --- a/arch/mips/emma2rh/markeins/Makefile +++ b/arch/mips/emma/markeins/Makefile @@ -10,4 +10,4 @@ # (at your option) any later version. # -obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o +obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c new file mode 100644 index 00000000000..c2583ecc93c --- /dev/null +++ b/arch/mips/emma/markeins/irq.c @@ -0,0 +1,331 @@ +/* + * arch/mips/emma2rh/markeins/irq.c + * This file defines the irq handler for EMMA2RH. + * + * Copyright (C) NEC Electronics Corporation 2004-2006 + * + * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c + * + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/delay.h> + +#include <asm/irq_cpu.h> +#include <asm/system.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> + +#include <asm/emma/emma2rh.h> + +static void emma2rh_irq_enable(unsigned int irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + irq -= EMMA2RH_IRQ_BASE; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (irq % 32); + emma2rh_out32(reg_index, reg_value | reg_bitmask); +} + +static void emma2rh_irq_disable(unsigned int irq) +{ + u32 reg_value; + u32 reg_bitmask; + u32 reg_index; + + irq -= EMMA2RH_IRQ_BASE; + + reg_index = EMMA2RH_BHIF_INT_EN_0 + + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); + reg_value = emma2rh_in32(reg_index); + reg_bitmask = 0x1 << (irq % 32); + emma2rh_out32(reg_index, reg_value & ~reg_bitmask); +} + +struct irq_chip emma2rh_irq_controller = { + .name = "emma2rh_irq", + .ack = emma2rh_irq_disable, + .mask = emma2rh_irq_disable, + .mask_ack = emma2rh_irq_disable, + .unmask = emma2rh_irq_enable, +}; + +void emma2rh_irq_init(void) +{ + u32 i; + + for (i = 0; i < NUM_EMMA2RH_IRQ; i++) + set_irq_chip_and_handler(EMMA2RH_IRQ_BASE + i, + &emma2rh_irq_controller, + handle_level_irq); +} + +static void emma2rh_sw_irq_enable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_SW_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +static void emma2rh_sw_irq_disable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_SW_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); +} + +struct irq_chip emma2rh_sw_irq_controller = { + .name = "emma2rh_sw_irq", + .ack = emma2rh_sw_irq_disable, + .mask = emma2rh_sw_irq_disable, + .mask_ack = emma2rh_sw_irq_disable, + .unmask = emma2rh_sw_irq_enable, +}; + +void emma2rh_sw_irq_init(void) +{ + u32 i; + + for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++) + set_irq_chip_and_handler(EMMA2RH_SW_IRQ_BASE + i, + &emma2rh_sw_irq_controller, + handle_level_irq); +} + +static void emma2rh_gpio_irq_enable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_GPIO_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +static void emma2rh_gpio_irq_disable(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_GPIO_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +static void emma2rh_gpio_irq_ack(unsigned int irq) +{ + u32 reg; + + irq -= EMMA2RH_GPIO_IRQ_BASE; + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg &= ~(1 << irq); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); +} + +static void emma2rh_gpio_irq_end(unsigned int irq) +{ + u32 reg; + + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + + irq -= EMMA2RH_GPIO_IRQ_BASE; + + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + reg |= 1 << irq; + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); + } +} + +struct irq_chip emma2rh_gpio_irq_controller = { + .name = "emma2rh_gpio_irq", + .ack = emma2rh_gpio_irq_ack, + .mask = emma2rh_gpio_irq_disable, + .mask_ack = emma2rh_gpio_irq_ack, + .unmask = emma2rh_gpio_irq_enable, + .end = emma2rh_gpio_irq_end, +}; + +void emma2rh_gpio_irq_init(void) +{ + u32 i; + + for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++) + set_irq_chip(EMMA2RH_GPIO_IRQ_BASE + i, + &emma2rh_gpio_irq_controller); +} + +static struct irqaction irq_cascade = { + .handler = no_action, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "cascade", + .dev_id = NULL, + .next = NULL, +}; + +/* + * the first level int-handler will jump here if it is a emma2rh irq + */ +void emma2rh_irq_dispatch(void) +{ + u32 intStatus; + u32 bitmask; + u32 i; + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) & + emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); + +#ifdef EMMA2RH_SW_CASCADE + if (intStatus & + (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 swIntStatus; + swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) + & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (swIntStatus & bitmask) { + do_IRQ(EMMA2RH_SW_IRQ_BASE + i); + return; + } + } + } +#endif + + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) & + emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); + +#ifdef EMMA2RH_GPIO_CASCADE + if (intStatus & + (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { + u32 gpioIntStatus; + gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) + & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { + if (gpioIntStatus & bitmask) { + do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); + return; + } + } + } +#endif + + for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } + + intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) & + emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); + + for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { + if (intStatus & bitmask) { + do_IRQ(EMMA2RH_IRQ_BASE + i); + return; + } + } +} + +void __init arch_init_irq(void) +{ + u32 reg; + + /* by default, interrupts are disabled. */ + emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); + emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); + emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); + + clear_c0_status(0xff00); + set_c0_status(0x0400); + +#define GPIO_PCI (0xf<<15) + /* setup GPIO interrupt for PCI interface */ + /* direction input */ + reg = emma2rh_in32(EMMA2RH_GPIO_DIR); + emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); + /* disable interrupt */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); + emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); + /* level triggerd */ + reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); + emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); + reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); + emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); + /* interrupt clear */ + emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); + + /* init all controllers */ + emma2rh_irq_init(); + emma2rh_sw_irq_init(); + emma2rh_gpio_irq_init(); + mips_cpu_irq_init(); + + /* setup cascade interrupts */ + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); + setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(CPU_IRQ_BASE + 7); + else if (pending & STATUSF_IP2) + emma2rh_irq_dispatch(); + else if (pending & STATUSF_IP1) + do_IRQ(CPU_IRQ_BASE + 1); + else if (pending & STATUSF_IP0) + do_IRQ(CPU_IRQ_BASE + 0); + else + spurious_interrupt(); +} diff --git a/arch/mips/emma2rh/markeins/led.c b/arch/mips/emma/markeins/led.c index b65254c1bfe..377a181b656 100644 --- a/arch/mips/emma2rh/markeins/led.c +++ b/arch/mips/emma/markeins/led.c @@ -21,7 +21,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/string.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> const unsigned long clear = 0x20202020; diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma/markeins/platform.c index fb9cda253ab..88e87f6b344 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -36,7 +36,7 @@ #include <asm/reboot.h> #include <asm/traps.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */ diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma/markeins/setup.c index b6a23ad539f..67f45650008 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma/markeins/setup.c @@ -29,7 +29,7 @@ #include <asm/time.h> #include <asm/reboot.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ diff --git a/arch/mips/emma2rh/common/irq.c b/arch/mips/emma2rh/common/irq.c deleted file mode 100644 index 91cbd959ab6..00000000000 --- a/arch/mips/emma2rh/common/irq.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/mips/emma2rh/common/irq.c - * This file is common irq dispatcher. - * - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> - -#include <asm/system.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> - -#include <asm/emma2rh/emma2rh.h> - -/* - * the first level int-handler will jump here if it is a emma2rh irq - */ -void emma2rh_irq_dispatch(void) -{ - u32 intStatus; - u32 bitmask; - u32 i; - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) - & emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); - -#ifdef EMMA2RH_SW_CASCADE - if (intStatus & - (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { - u32 swIntStatus; - swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) - & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (swIntStatus & bitmask) { - do_IRQ(EMMA2RH_SW_IRQ_BASE + i); - return; - } - } - } -#endif - - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) - & emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); - -#ifdef EMMA2RH_GPIO_CASCADE - if (intStatus & - (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) { - u32 gpioIntStatus; - gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) - & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (gpioIntStatus & bitmask) { - do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); - return; - } - } - } -#endif - - for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) - & emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); - - for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } -} diff --git a/arch/mips/emma2rh/common/irq_emma2rh.c b/arch/mips/emma2rh/common/irq_emma2rh.c deleted file mode 100644 index 96df37b7775..00000000000 --- a/arch/mips/emma2rh/common/irq_emma2rh.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/mips/emma2rh/common/irq_emma2rh.c - * This file defines the irq handler for EMMA2RH. - * - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * EMMA2RH defines 64 IRQs. - * - * This file exports one function: - * emma2rh_irq_init(u32 irq_base); - */ - -#include <linux/interrupt.h> -#include <linux/types.h> -#include <linux/ptrace.h> - -#include <asm/debug.h> - -#include <asm/emma2rh/emma2rh.h> - -/* number of total irqs supported by EMMA2RH */ -#define NUM_EMMA2RH_IRQ 96 - -static int emma2rh_irq_base = -1; - -void ll_emma2rh_irq_enable(int); -void ll_emma2rh_irq_disable(int); - -static void emma2rh_irq_enable(unsigned int irq) -{ - ll_emma2rh_irq_enable(irq - emma2rh_irq_base); -} - -static void emma2rh_irq_disable(unsigned int irq) -{ - ll_emma2rh_irq_disable(irq - emma2rh_irq_base); -} - -struct irq_chip emma2rh_irq_controller = { - .name = "emma2rh_irq", - .ack = emma2rh_irq_disable, - .mask = emma2rh_irq_disable, - .mask_ack = emma2rh_irq_disable, - .unmask = emma2rh_irq_enable, -}; - -void emma2rh_irq_init(u32 irq_base) -{ - u32 i; - - for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++) - set_irq_chip_and_handler(i, &emma2rh_irq_controller, - handle_level_irq); - - emma2rh_irq_base = irq_base; -} - -void ll_emma2rh_irq_enable(int emma2rh_irq) -{ - u32 reg_value; - u32 reg_bitmask; - u32 reg_index; - - reg_index = EMMA2RH_BHIF_INT_EN_0 - + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) - * (emma2rh_irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (emma2rh_irq % 32); - db_assert((reg_value & reg_bitmask) == 0); - emma2rh_out32(reg_index, reg_value | reg_bitmask); -} - -void ll_emma2rh_irq_disable(int emma2rh_irq) -{ - u32 reg_value; - u32 reg_bitmask; - u32 reg_index; - - reg_index = EMMA2RH_BHIF_INT_EN_0 - + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) - * (emma2rh_irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (emma2rh_irq % 32); - db_assert((reg_value & reg_bitmask) != 0); - emma2rh_out32(reg_index, reg_value & ~reg_bitmask); -} diff --git a/arch/mips/emma2rh/markeins/irq.c b/arch/mips/emma2rh/markeins/irq.c deleted file mode 100644 index 6bcf6a06367..00000000000 --- a/arch/mips/emma2rh/markeins/irq.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/mips/emma2rh/markeins/irq.c - * This file defines the irq handler for EMMA2RH. - * - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/delay.h> - -#include <asm/irq_cpu.h> -#include <asm/system.h> -#include <asm/mipsregs.h> -#include <asm/debug.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> - -#include <asm/emma2rh/emma2rh.h> - -/* - * IRQ mapping - * - * 0-7: 8 CPU interrupts - * 0 - software interrupt 0 - * 1 - software interrupt 1 - * 2 - most Vrc5477 interrupts are routed to this pin - * 3 - (optional) some other interrupts routed to this pin for debugg - * 4 - not used - * 5 - not used - * 6 - not used - * 7 - cpu timer (used by default) - * - */ - -extern void emma2rh_sw_irq_init(u32 base); -extern void emma2rh_gpio_irq_init(u32 base); -extern void emma2rh_irq_init(u32 base); -extern void emma2rh_irq_dispatch(void); - -static struct irqaction irq_cascade = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "cascade", - .dev_id = NULL, - .next = NULL, -}; - -void __init arch_init_irq(void) -{ - u32 reg; - - db_run(printk("markeins_irq_setup invoked.\n")); - - /* by default, interrupts are disabled. */ - emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); - - clear_c0_status(0xff00); - set_c0_status(0x0400); - -#define GPIO_PCI (0xf<<15) - /* setup GPIO interrupt for PCI interface */ - /* direction input */ - reg = emma2rh_in32(EMMA2RH_GPIO_DIR); - emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); - /* disable interrupt */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); - /* level triggerd */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); - emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); - reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); - emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); - /* interrupt clear */ - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); - - /* init all controllers */ - emma2rh_irq_init(EMMA2RH_IRQ_BASE); - emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE); - emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE); - mips_cpu_irq_init(); - - /* setup cascade interrupts */ - setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); - setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade); - setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(CPU_IRQ_BASE + 7); - else if (pending & STATUSF_IP2) - emma2rh_irq_dispatch(); - else if (pending & STATUSF_IP1) - do_IRQ(CPU_IRQ_BASE + 1); - else if (pending & STATUSF_IP0) - do_IRQ(CPU_IRQ_BASE + 0); - else - spurious_interrupt(); -} - - diff --git a/arch/mips/emma2rh/markeins/irq_markeins.c b/arch/mips/emma2rh/markeins/irq_markeins.c deleted file mode 100644 index fba5c156f47..00000000000 --- a/arch/mips/emma2rh/markeins/irq_markeins.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * arch/mips/emma2rh/markeins/irq_markeins.c - * This file defines the irq handler for Mark-eins. - * - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c - * - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/ptrace.h> - -#include <asm/debug.h> -#include <asm/emma2rh/emma2rh.h> - -static int emma2rh_sw_irq_base = -1; -static int emma2rh_gpio_irq_base = -1; - -void ll_emma2rh_sw_irq_enable(int reg); -void ll_emma2rh_sw_irq_disable(int reg); -void ll_emma2rh_gpio_irq_enable(int reg); -void ll_emma2rh_gpio_irq_disable(int reg); - -static void emma2rh_sw_irq_enable(unsigned int irq) -{ - ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base); -} - -static void emma2rh_sw_irq_disable(unsigned int irq) -{ - ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base); -} - -struct irq_chip emma2rh_sw_irq_controller = { - .name = "emma2rh_sw_irq", - .ack = emma2rh_sw_irq_disable, - .mask = emma2rh_sw_irq_disable, - .mask_ack = emma2rh_sw_irq_disable, - .unmask = emma2rh_sw_irq_enable, -}; - -void emma2rh_sw_irq_init(u32 irq_base) -{ - u32 i; - - for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++) - set_irq_chip_and_handler(i, &emma2rh_sw_irq_controller, - handle_level_irq); - - emma2rh_sw_irq_base = irq_base; -} - -void ll_emma2rh_sw_irq_enable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < NUM_EMMA2RH_IRQ_SW); - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -void ll_emma2rh_sw_irq_disable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < 32); - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -static void emma2rh_gpio_irq_enable(unsigned int irq) -{ - ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); -} - -static void emma2rh_gpio_irq_disable(unsigned int irq) -{ - ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base); -} - -static void emma2rh_gpio_irq_ack(unsigned int irq) -{ - irq -= emma2rh_gpio_irq_base; - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); - ll_emma2rh_gpio_irq_disable(irq); -} - -static void emma2rh_gpio_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base); -} - -struct irq_chip emma2rh_gpio_irq_controller = { - .name = "emma2rh_gpio_irq", - .ack = emma2rh_gpio_irq_ack, - .mask = emma2rh_gpio_irq_disable, - .mask_ack = emma2rh_gpio_irq_ack, - .unmask = emma2rh_gpio_irq_enable, - .end = emma2rh_gpio_irq_end, -}; - -void emma2rh_gpio_irq_init(u32 irq_base) -{ - u32 i; - - for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++) - set_irq_chip(i, &emma2rh_gpio_irq_controller); - - emma2rh_gpio_irq_base = irq_base; -} - -void ll_emma2rh_gpio_irq_enable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -void ll_emma2rh_gpio_irq_disable(int irq) -{ - u32 reg; - - db_assert(irq >= 0); - db_assert(irq < NUM_EMMA2RH_IRQ_GPIO); - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h index 6a1af0af51e..30aea91de62 100644 --- a/arch/mips/include/asm/emma2rh/emma2rh.h +++ b/arch/mips/include/asm/emma/emma2rh.h @@ -1,5 +1,5 @@ /* - * include/asm-mips/emma2rh/emma2rh.h + * arch/mips/include/asm/emma/emma2rh.h * This file is EMMA2RH common header. * * Copyright (C) NEC Electronics Corporation 2005-2006 @@ -21,8 +21,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_EMMA2RH_EMMA2RH_H -#define __ASM_EMMA2RH_EMMA2RH_H +#ifndef __ASM_EMMA_EMMA2RH_H +#define __ASM_EMMA_EMMA2RH_H #include <irq.h> @@ -206,7 +206,6 @@ static inline void emma2rh_out32(u32 offset, u32 val) static inline u32 emma2rh_in32(u32 offset) { u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); return val; } @@ -219,7 +218,6 @@ static inline void emma2rh_out16(u32 offset, u16 val) static inline u16 emma2rh_in16(u32 offset) { u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); return val; } @@ -232,7 +230,6 @@ static inline void emma2rh_out8(u32 offset, u8 val) static inline u8 emma2rh_in8(u32 offset) { u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); return val; } @@ -324,10 +321,10 @@ static inline u8 emma2rh_in8(u32 offset) /* * include the board dependent part */ -#if defined(CONFIG_MARKEINS) -#include <asm/emma2rh/markeins.h> +#ifdef CONFIG_NEC_MARKEINS +#include <asm/emma/markeins.h> #else #error "Unknown EMMA2RH board!" #endif -#endif /* __ASM_EMMA2RH_EMMA2RH_H */ +#endif /* __ASM_EMMA_EMMA2RH_H */ diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma/markeins.h index 973b0628490..973b0628490 100644 --- a/arch/mips/include/asm/emma2rh/markeins.h +++ b/arch/mips/include/asm/emma/markeins.h diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h new file mode 100644 index 00000000000..ea6aa143b78 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/pci.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org> + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + */ + +#ifndef _LEMOTE_PCI_H_ +#define _LEMOTE_PCI_H_ + +#define LOONGSON2E_PCI_MEM_START 0x14000000UL +#define LOONGSON2E_PCI_MEM_END 0x1fffffffUL +#define LOONGSON2E_PCI_IO_START 0x00004000UL +#define LOONGSON2E_IO_PORT_BASE 0x1fd00000UL + +#endif /* !_LEMOTE_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h new file mode 100644 index 00000000000..8de0eb9c98a --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/gpio.h @@ -0,0 +1,172 @@ +/* + * gpio.h: GPIO Support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H +#define __ASM_MIPS_MACH_PNX833X_GPIO_H + +/* BIG FAT WARNING: races danger! + No protections exist here. Current users are only early init code, + when locking is not needed because no cuncurency yet exists there, + and GPIO IRQ dispatcher, which does locking. + However, if many uses will ever happen, proper locking will be needed + - including locking between different uses +*/ + +#include "pnx833x.h" + +#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0) +#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0) + +/* Initialize GPIO to a known state */ +static inline void pnx833x_gpio_init(void) +{ + PNX833X_PIO_DIR = 0; + PNX833X_PIO_DIR2 = 0; + PNX833X_PIO_SEL = 0; + PNX833X_PIO_SEL2 = 0; + PNX833X_PIO_INT_EDGE = 0; + PNX833X_PIO_INT_HI = 0; + PNX833X_PIO_INT_LO = 0; + + /* clear any GPIO interrupt requests */ + PNX833X_PIO_INT_CLEAR = 0xffff; + PNX833X_PIO_INT_CLEAR = 0; + PNX833X_PIO_INT_ENABLE = 0; +} + +/* Select GPIO direction for a pin */ +static inline void pnx833x_gpio_select_input(unsigned int pin) +{ + if (pin < 32) + CLEAR_REG_BIT(PNX833X_PIO_DIR, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31); +} +static inline void pnx833x_gpio_select_output(unsigned int pin) +{ + if (pin < 32) + SET_REG_BIT(PNX833X_PIO_DIR, pin); + else + SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31); +} + +/* Select GPIO or alternate function for a pin */ +static inline void pnx833x_gpio_select_function_io(unsigned int pin) +{ + if (pin < 32) + CLEAR_REG_BIT(PNX833X_PIO_SEL, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31); +} +static inline void pnx833x_gpio_select_function_alt(unsigned int pin) +{ + if (pin < 32) + SET_REG_BIT(PNX833X_PIO_SEL, pin); + else + SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31); +} + +/* Read GPIO pin */ +static inline int pnx833x_gpio_read(unsigned int pin) +{ + if (pin < 32) + return (PNX833X_PIO_IN >> pin) & 1; + else + return (PNX833X_PIO_IN2 >> (pin & 31)) & 1; +} + +/* Write GPIO pin */ +static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin) +{ + if (pin < 32) { + if (val) + SET_REG_BIT(PNX833X_PIO_OUT, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_OUT, pin); + } else { + if (val) + SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31); + else + CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31); + } +} + +/* Configure GPIO interrupt */ +#define GPIO_INT_NONE 0 +#define GPIO_INT_LEVEL_LOW 1 +#define GPIO_INT_LEVEL_HIGH 2 +#define GPIO_INT_EDGE_RISING 3 +#define GPIO_INT_EDGE_FALLING 4 +#define GPIO_INT_EDGE_BOTH 5 +static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin) +{ + switch (when) { + case GPIO_INT_LEVEL_LOW: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_LEVEL_HIGH: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_RISING: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_FALLING: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_BOTH: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + default: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + } +} + +/* Enable/disable GPIO interrupt */ +static inline void pnx833x_gpio_enable_irq(unsigned int pin) +{ + SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); +} +static inline void pnx833x_gpio_disable_irq(unsigned int pin) +{ + CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); +} + +/* Clear GPIO interrupt request */ +static inline void pnx833x_gpio_clear_irq(unsigned int pin) +{ + SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); +} + +#endif diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h new file mode 100644 index 00000000000..657f089b172 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h @@ -0,0 +1,126 @@ + +/* + * irq.h: IRQ mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H +#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H +/* + * The "IRQ numbers" are completely virtual. + * + * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. + * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, + * numbers 49..64 for (virtual) GPIO interrupts. + * + * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, + * connected to PIC, which uses core hardware interrupt 2, and also + * a timer interrupt through hardware interrupt 5. + * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, + * numbers 65..80 for (virtual) GPIO interrupts. + * + */ +#include <irq.h> + +#define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) + +/* Interrupts supported by PIC */ +#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1) +#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2) +#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3) +#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4) +#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5) +#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6) +#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7) +#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8) +#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9) +#define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10) +#define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11) +#define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12) +#define PNX8330_PIC_SPU_INT (PNX833X_PIC_IRQ_BASE + 13) +#define PNX8335_PIC_SATA_INT (PNX833X_PIC_IRQ_BASE + 13) +#define PNX833X_PIC_OSD_INT (PNX833X_PIC_IRQ_BASE + 14) +#define PNX833X_PIC_DISP1_INT (PNX833X_PIC_IRQ_BASE + 15) +#define PNX833X_PIC_DEINTERLACER_INT (PNX833X_PIC_IRQ_BASE + 16) +#define PNX833X_PIC_DISPLAY2_INT (PNX833X_PIC_IRQ_BASE + 17) +#define PNX833X_PIC_VC_INT (PNX833X_PIC_IRQ_BASE + 18) +#define PNX833X_PIC_SC_INT (PNX833X_PIC_IRQ_BASE + 19) +#define PNX833X_PIC_IDE_INT (PNX833X_PIC_IRQ_BASE + 20) +#define PNX833X_PIC_IDE_DMA_INT (PNX833X_PIC_IRQ_BASE + 21) +#define PNX833X_PIC_TS_IN1_DV_INT (PNX833X_PIC_IRQ_BASE + 22) +#define PNX833X_PIC_TS_IN1_DMA_INT (PNX833X_PIC_IRQ_BASE + 23) +#define PNX833X_PIC_SGDX_DMA_INT (PNX833X_PIC_IRQ_BASE + 24) +#define PNX833X_PIC_TS_OUT_INT (PNX833X_PIC_IRQ_BASE + 25) +#define PNX833X_PIC_IR_INT (PNX833X_PIC_IRQ_BASE + 26) +#define PNX833X_PIC_VMSP1_INT (PNX833X_PIC_IRQ_BASE + 27) +#define PNX833X_PIC_VMSP2_INT (PNX833X_PIC_IRQ_BASE + 28) +#define PNX833X_PIC_PIBC_INT (PNX833X_PIC_IRQ_BASE + 29) +#define PNX833X_PIC_TS_IN0_TRD_INT (PNX833X_PIC_IRQ_BASE + 30) +#define PNX833X_PIC_SGDX_TPD_INT (PNX833X_PIC_IRQ_BASE + 31) +#define PNX833X_PIC_USB_INT (PNX833X_PIC_IRQ_BASE + 32) +#define PNX833X_PIC_TS_IN1_TRD_INT (PNX833X_PIC_IRQ_BASE + 33) +#define PNX833X_PIC_CLOCK_INT (PNX833X_PIC_IRQ_BASE + 34) +#define PNX833X_PIC_SGDX_PARSER_INT (PNX833X_PIC_IRQ_BASE + 35) +#define PNX833X_PIC_VMSP_DMA_INT (PNX833X_PIC_IRQ_BASE + 36) + +#if defined(CONFIG_SOC_PNX8335) +#define PNX8335_PIC_MIU_INT (PNX833X_PIC_IRQ_BASE + 37) +#define PNX8335_PIC_AVCHIP_IRQ_INT (PNX833X_PIC_IRQ_BASE + 38) +#define PNX8335_PIC_SYNC_HD_INT (PNX833X_PIC_IRQ_BASE + 39) +#define PNX8335_PIC_DISP_HD_INT (PNX833X_PIC_IRQ_BASE + 40) +#define PNX8335_PIC_DISP_SCALER_INT (PNX833X_PIC_IRQ_BASE + 41) +#define PNX8335_PIC_OSD_HD1_INT (PNX833X_PIC_IRQ_BASE + 42) +#define PNX8335_PIC_DTL_WRITER_Y_INT (PNX833X_PIC_IRQ_BASE + 43) +#define PNX8335_PIC_DTL_WRITER_C_INT (PNX833X_PIC_IRQ_BASE + 44) +#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT (PNX833X_PIC_IRQ_BASE + 45) +#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT (PNX833X_PIC_IRQ_BASE + 46) +#define PNX8335_PIC_DENC_TTX_INT (PNX833X_PIC_IRQ_BASE + 47) +#define PNX8335_PIC_MMI_SIF0_INT (PNX833X_PIC_IRQ_BASE + 48) +#define PNX8335_PIC_MMI_SIF1_INT (PNX833X_PIC_IRQ_BASE + 49) +#define PNX8335_PIC_MMI_CDMMU_INT (PNX833X_PIC_IRQ_BASE + 50) +#define PNX8335_PIC_PIBCS_INT (PNX833X_PIC_IRQ_BASE + 51) +#define PNX8335_PIC_ETHERNET_INT (PNX833X_PIC_IRQ_BASE + 52) +#define PNX8335_PIC_VMSP1_0_INT (PNX833X_PIC_IRQ_BASE + 53) +#define PNX8335_PIC_VMSP1_1_INT (PNX833X_PIC_IRQ_BASE + 54) +#define PNX8335_PIC_VMSP1_DMA_INT (PNX833X_PIC_IRQ_BASE + 55) +#define PNX8335_PIC_TDGR_DE_INT (PNX833X_PIC_IRQ_BASE + 56) +#define PNX8335_PIC_IR1_IRQ_INT (PNX833X_PIC_IRQ_BASE + 57) +#endif + +/* GPIO interrupts */ +#define PNX833X_GPIO_0_INT (PNX833X_GPIO_IRQ_BASE + 0) +#define PNX833X_GPIO_1_INT (PNX833X_GPIO_IRQ_BASE + 1) +#define PNX833X_GPIO_2_INT (PNX833X_GPIO_IRQ_BASE + 2) +#define PNX833X_GPIO_3_INT (PNX833X_GPIO_IRQ_BASE + 3) +#define PNX833X_GPIO_4_INT (PNX833X_GPIO_IRQ_BASE + 4) +#define PNX833X_GPIO_5_INT (PNX833X_GPIO_IRQ_BASE + 5) +#define PNX833X_GPIO_6_INT (PNX833X_GPIO_IRQ_BASE + 6) +#define PNX833X_GPIO_7_INT (PNX833X_GPIO_IRQ_BASE + 7) +#define PNX833X_GPIO_8_INT (PNX833X_GPIO_IRQ_BASE + 8) +#define PNX833X_GPIO_9_INT (PNX833X_GPIO_IRQ_BASE + 9) +#define PNX833X_GPIO_10_INT (PNX833X_GPIO_IRQ_BASE + 10) +#define PNX833X_GPIO_11_INT (PNX833X_GPIO_IRQ_BASE + 11) +#define PNX833X_GPIO_12_INT (PNX833X_GPIO_IRQ_BASE + 12) +#define PNX833X_GPIO_13_INT (PNX833X_GPIO_IRQ_BASE + 13) +#define PNX833X_GPIO_14_INT (PNX833X_GPIO_IRQ_BASE + 14) +#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15) + +#endif + diff --git a/arch/mips/include/asm/mach-pnx833x/irq.h b/arch/mips/include/asm/mach-pnx833x/irq.h new file mode 100644 index 00000000000..745114b1d8d --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/irq.h @@ -0,0 +1,53 @@ +/* + * irq.h: IRQ mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H +#define __ASM_MIPS_MACH_PNX833X_IRQ_H +/* + * The "IRQ numbers" are completely virtual. + * + * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. + * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, + * numbers 49..64 for (virtual) GPIO interrupts. + * + * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, + * connected to PIC, which uses core hardware interrupt 2, and also + * a timer interrupt through hardware interrupt 5. + * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, + * numbers 65..80 for (virtual) GPIO interrupts. + * + */ +#if defined(CONFIG_SOC_PNX8335) + #define PNX833X_PIC_NUM_IRQ 58 +#else + #define PNX833X_PIC_NUM_IRQ 37 +#endif + +#define MIPS_CPU_NUM_IRQ 8 +#define PNX833X_GPIO_NUM_IRQ 16 + +#define MIPS_CPU_IRQ_BASE 0 +#define PNX833X_PIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ) +#define PNX833X_GPIO_IRQ_BASE (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ) +#define NR_IRQS (MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ) + +#endif diff --git a/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/arch/mips/include/asm/mach-pnx833x/pnx833x.h new file mode 100644 index 00000000000..100f52870e3 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/pnx833x.h @@ -0,0 +1,202 @@ +/* + * pnx833x.h: Register mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H +#define __ASM_MIPS_MACH_PNX833X_PNX833X_H + +/* All regs are accessed in KSEG1 */ +#define PNX833X_BASE (0xa0000000ul + 0x17E00000ul) + +#define PNX833X_REG(offs) (*((volatile unsigned long *)(PNX833X_BASE + offs))) + +/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */ + +/* Read access to multibit fields */ +#define PNX833X_BIT(val, reg, field) ((val) & PNX833X_##reg##_##field) +#define PNX833X_REGBIT(reg, field) PNX833X_BIT(PNX833X_##reg, reg, field) + +/* Use PNX833X_FIELD to extract a field from val */ +#define PNX_FIELD(cpu, val, reg, field) \ + (((val) & PNX##cpu##_##reg##_##field##_MASK) >> \ + PNX##cpu##_##reg##_##field##_SHIFT) +#define PNX833X_FIELD(val, reg, field) PNX_FIELD(833X, val, reg, field) +#define PNX8330_FIELD(val, reg, field) PNX_FIELD(8330, val, reg, field) +#define PNX8335_FIELD(val, reg, field) PNX_FIELD(8335, val, reg, field) + +/* Use PNX833X_REGFIELD to extract a field from a register */ +#define PNX833X_REGFIELD(reg, field) PNX833X_FIELD(PNX833X_##reg, reg, field) +#define PNX8330_REGFIELD(reg, field) PNX8330_FIELD(PNX8330_##reg, reg, field) +#define PNX8335_REGFIELD(reg, field) PNX8335_FIELD(PNX8335_##reg, reg, field) + + +#define PNX_WRITEFIELD(cpu, val, reg, field) \ + (PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \ + ((val) << PNX##cpu##_##reg##_##field##_SHIFT)) +#define PNX833X_WRITEFIELD(val, reg, field) \ + PNX_WRITEFIELD(833X, val, reg, field) +#define PNX8330_WRITEFIELD(val, reg, field) \ + PNX_WRITEFIELD(8330, val, reg, field) +#define PNX8335_WRITEFIELD(val, reg, field) \ + PNX_WRITEFIELD(8335, val, reg, field) + + +/* Macros to detect CPU type */ + +#define PNX833X_CONFIG_MODULE_ID PNX833X_REG(0x7FFC) +#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK 0x0000f000 +#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT 12 +#define PNX8330_CONFIG_MODULE_MAJREV 4 +#define PNX8335_CONFIG_MODULE_MAJREV 5 +#define CPU_IS_PNX8330 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ + PNX8330_CONFIG_MODULE_MAJREV) +#define CPU_IS_PNX8335 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ + PNX8335_CONFIG_MODULE_MAJREV) + + + +#define PNX833X_RESET_CONTROL PNX833X_REG(0x8004) +#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014) + +#define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs)) +#define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0) +#define PNX833X_PIC_INT_SRC PNX833X_PIC_REG(0x4) +#define PNX833X_PIC_INT_SRC_INT_SRC_MASK 0x00000FF8ul /* bits 11:3 */ +#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3 +#define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq)) + +#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228) +#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */ +#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */ +#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3 + +#define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020) +#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f +#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT 0 + +#define PNX833X_CONFIG_MUX PNX833X_REG(0x7004) +#define PNX833X_CONFIG_MUX_IDE_MUX 0x00000080 /* bit 7 */ + +#define PNX8330_CONFIG_POLYFUSE_7 PNX833X_REG(0x7040) +#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK 0x00180000 +#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT 19 + +#define PNX833X_PIO_IN PNX833X_REG(0xF000) +#define PNX833X_PIO_OUT PNX833X_REG(0xF004) +#define PNX833X_PIO_DIR PNX833X_REG(0xF008) +#define PNX833X_PIO_SEL PNX833X_REG(0xF014) +#define PNX833X_PIO_INT_EDGE PNX833X_REG(0xF020) +#define PNX833X_PIO_INT_HI PNX833X_REG(0xF024) +#define PNX833X_PIO_INT_LO PNX833X_REG(0xF028) +#define PNX833X_PIO_INT_STATUS PNX833X_REG(0xFFE0) +#define PNX833X_PIO_INT_ENABLE PNX833X_REG(0xFFE4) +#define PNX833X_PIO_INT_CLEAR PNX833X_REG(0xFFE8) +#define PNX833X_PIO_IN2 PNX833X_REG(0xF05C) +#define PNX833X_PIO_OUT2 PNX833X_REG(0xF060) +#define PNX833X_PIO_DIR2 PNX833X_REG(0xF064) +#define PNX833X_PIO_SEL2 PNX833X_REG(0xF068) + +#define PNX833X_UART0_PORTS_START (PNX833X_BASE + 0xB000) +#define PNX833X_UART0_PORTS_END (PNX833X_BASE + 0xBFFF) +#define PNX833X_UART1_PORTS_START (PNX833X_BASE + 0xC000) +#define PNX833X_UART1_PORTS_END (PNX833X_BASE + 0xCFFF) + +#define PNX833X_USB_PORTS_START (PNX833X_BASE + 0x19000) +#define PNX833X_USB_PORTS_END (PNX833X_BASE + 0x19FFF) + +#define PNX833X_CONFIG_USB PNX833X_REG(0x7008) + +#define PNX833X_I2C0_PORTS_START (PNX833X_BASE + 0xD000) +#define PNX833X_I2C0_PORTS_END (PNX833X_BASE + 0xDFFF) +#define PNX833X_I2C1_PORTS_START (PNX833X_BASE + 0xE000) +#define PNX833X_I2C1_PORTS_END (PNX833X_BASE + 0xEFFF) + +#define PNX833X_IDE_PORTS_START (PNX833X_BASE + 0x1A000) +#define PNX833X_IDE_PORTS_END (PNX833X_BASE + 0x1AFFF) +#define PNX833X_IDE_MODULE_ID PNX833X_REG(0x1AFFC) + +#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 +#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT 16 +#define PNX833X_IDE_MODULE_ID_VALUE 0xA009 + + +#define PNX833X_MIU_SEL0 PNX833X_REG(0x2004) +#define PNX833X_MIU_SEL0_TIMING PNX833X_REG(0x2008) +#define PNX833X_MIU_SEL1 PNX833X_REG(0x200C) +#define PNX833X_MIU_SEL1_TIMING PNX833X_REG(0x2010) +#define PNX833X_MIU_SEL2 PNX833X_REG(0x2014) +#define PNX833X_MIU_SEL2_TIMING PNX833X_REG(0x2018) +#define PNX833X_MIU_SEL3 PNX833X_REG(0x201C) +#define PNX833X_MIU_SEL3_TIMING PNX833X_REG(0x2020) + +#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14) +#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14 + +#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7) +#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7 + +#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9) +#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT 9 + +#define PNX833X_MIU_CONFIG_SPI PNX833X_REG(0x2000) + +#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3) +#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3 + +#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2) +#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2 + +#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1) +#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1 + +#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0) +#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT 0 + +#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \ + (PNX833X_MIU_CONFIG_SPI = \ + ((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) | \ + ((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) | \ + ((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) | \ + ((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT)) + +#define PNX8335_IP3902_PORTS_START (PNX833X_BASE + 0x2F000) +#define PNX8335_IP3902_PORTS_END (PNX833X_BASE + 0x2FFFF) +#define PNX8335_IP3902_MODULE_ID PNX833X_REG(0x2FFFC) + +#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 +#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT 16 +#define PNX8335_IP3902_MODULE_ID_VALUE 0x3902 + + /* I/O location(gets remapped)*/ +#define PNX8335_NAND_BASE 0x18000000 +/* I/O location with CLE high */ +#define PNX8335_NAND_CLE_MASK 0x00100000 +/* I/O location with ALE high */ +#define PNX8335_NAND_ALE_MASK 0x00010000 + +#define PNX8335_SATA_PORTS_START (PNX833X_BASE + 0x2E000) +#define PNX8335_SATA_PORTS_END (PNX833X_BASE + 0x2EFFF) +#define PNX8335_SATA_MODULE_ID PNX833X_REG(0x2EFFC) + +#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 +#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT 16 +#define PNX8335_SATA_MODULE_ID_VALUE 0xA099 + +#endif diff --git a/arch/mips/include/asm/mach-pnx833x/war.h b/arch/mips/include/asm/mach-pnx833x/war.h new file mode 100644 index 00000000000..82cd1e97bc2 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_PNX833X_WAR_H +#define __ASM_MIPS_MACH_PNX833X_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/mangle-port.h b/arch/mips/include/asm/mach-tx49xx/mangle-port.h new file mode 100644 index 00000000000..5e6912fdd0e --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/mangle-port.h @@ -0,0 +1,26 @@ +#ifndef __ASM_MACH_TX49XX_MANGLE_PORT_H +#define __ASM_MACH_TX49XX_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#define ioswabb(a, x) (x) +#define __mem_ioswabb(a, x) (x) +#if defined(CONFIG_TOSHIBA_RBTX4939) && \ + (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) && \ + defined(__BIG_ENDIAN) +#define NEEDS_TXX9_IOSWABW +extern u16 (*ioswabw)(volatile u16 *a, u16 x); +extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x); +#else +#define ioswabw(a, x) le16_to_cpu(x) +#define __mem_ioswabw(a, x) (x) +#endif +#define ioswabl(a, x) le32_to_cpu(x) +#define __mem_ioswabl(a, x) (x) +#define ioswabq(a, x) le64_to_cpu(x) +#define __mem_ioswabq(a, x) (x) + +#endif /* __ASM_MACH_TX49XX_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 979866000da..9316324d070 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -192,6 +192,7 @@ #define PM_16M 0x01ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 +#define PM_1G 0x7fffe000 #endif diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index de6d09ebbd8..e2e09b2cd26 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "R5000 " #elif defined CONFIG_CPU_R5432 #define MODULE_PROC_FAMILY "R5432 " +#elif defined CONFIG_CPU_R5500 +#define MODULE_PROC_FAMILY "R5500 " #elif defined CONFIG_CPU_R6000 #define MODULE_PROC_FAMILY "R6000 " #elif defined CONFIG_CPU_NEVADA diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 9c22571b160..813abd16255 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -80,25 +80,25 @@ enum pt_watch_style { pt_watch_style_mips64 }; struct mips32_watch_regs { - uint32_t watchlo[8]; + unsigned int watchlo[8]; /* Lower 16 bits of watchhi. */ - uint16_t watchhi[8]; + unsigned short watchhi[8]; /* Valid mask and I R W bits. * bit 0 -- 1 if W bit is usable. * bit 1 -- 1 if R bit is usable. * bit 2 -- 1 if I bit is usable. * bits 3 - 11 -- Valid watchhi mask bits. */ - uint16_t watch_masks[8]; + unsigned short watch_masks[8]; /* The number of valid watch register pairs. */ - uint32_t num_valid; + unsigned int num_valid; } __attribute__((aligned(8))); struct mips64_watch_regs { - uint64_t watchlo[8]; - uint16_t watchhi[8]; - uint16_t watch_masks[8]; - uint32_t num_valid; + unsigned long long watchlo[8]; + unsigned short watchhi[8]; + unsigned short watch_masks[8]; + unsigned int num_valid; } __attribute__((aligned(8))); struct pt_watch_regs { @@ -116,6 +116,7 @@ struct pt_watch_regs { #include <linux/compiler.h> #include <linux/linkage.h> +#include <linux/types.h> #include <asm/isadep.h> struct task_struct; diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h index 4316a3e5767..9cde0090cbf 100644 --- a/arch/mips/include/asm/txx9/generic.h +++ b/arch/mips/include/asm/txx9/generic.h @@ -86,4 +86,9 @@ void txx9_iocled_init(unsigned long baseaddr, int basenum, unsigned int num, int lowactive, const char *color, char **deftriggers); +/* 7SEG LED */ +void txx9_7segled_init(unsigned int num, + void (*putc)(unsigned int pos, unsigned char val)); +int txx9_7segled_putc(unsigned int pos, char c); + #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index d9da7112aaf..b1372c27f13 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_R5500) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 5e75a316f6b..759f68066b5 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -180,7 +180,7 @@ bad_stack: * The system call does not exist in this kernel */ illegal_syscall: - li v0, -ENOSYS # error + li v0, ENOSYS # error sw v0, PT_R2(sp) li t0, 1 # set error flag sw t0, PT_R7(sp) @@ -293,7 +293,7 @@ bad_alignment: jr t2 /* Unreached */ -einval: li v0, -EINVAL +einval: li v0, -ENOSYS jr ra END(sys_syscall) diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 3d58204c9d4..a9e17161899 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -117,7 +117,7 @@ syscall_trace_entry: illegal_syscall: /* This also isn't a 64-bit syscall, throw an error. */ - li v0, -ENOSYS # error + li v0, ENOSYS # error sd v0, PT_R2(sp) li t0, 1 # set error flag sd t0, PT_R7(sp) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 16f8edfe5cd..4430a1f8fdf 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -601,8 +601,8 @@ static int __init debugfs_mips(void) struct dentry *d; d = debugfs_create_dir("mips", NULL); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; mips_debugfs_dir = d; return 0; } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 7b59cfb7e60..b79ea7055ec 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -163,8 +163,10 @@ static void stop_this_cpu(void *dummy) * Remove this CPU: */ cpu_clear(smp_processor_id(), cpu_online_map); - local_irq_enable(); /* May need to service _machine_restart IPI */ - for (;;); /* Wait if available. */ + for (;;) { + if (cpu_wait) + (*cpu_wait)(); /* Wait if available. */ + } } void smp_send_stop(void) diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index c327b21bca8..20709669e59 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -560,12 +560,12 @@ static int __init debugfs_unaligned(void) return -ENODEV; d = debugfs_create_u32("unaligned_instructions", S_IRUGO, mips_debugfs_dir, &unaligned_instructions); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, mips_debugfs_dir, &unaligned_action); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; return 0; } __initcall(debugfs_unaligned); diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c index c1e41f15cc7..8be03a8e1ad 100644 --- a/arch/mips/lemote/lm2e/pci.c +++ b/arch/mips/lemote/lm2e/pci.c @@ -30,19 +30,20 @@ #include <linux/kernel.h> #include <linux/init.h> #include <asm/mips-boards/bonito64.h> +#include <asm/mach-lemote/pci.h> extern struct pci_ops bonito64_pci_ops; static struct resource loongson2e_pci_mem_resource = { .name = "LOONGSON2E PCI MEM", - .start = 0x14000000UL, - .end = 0x1fffffffUL, + .start = LOONGSON2E_PCI_MEM_START, + .end = LOONGSON2E_PCI_MEM_END, .flags = IORESOURCE_MEM, }; static struct resource loongson2e_pci_io_resource = { .name = "LOONGSON2E PCI IO MEM", - .start = 0x00004000UL, + .start = LOONGSON2E_PCI_IO_START, .end = IO_SPACE_LIMIT, .flags = IORESOURCE_IO, }; @@ -82,6 +83,12 @@ static void __init ict_pcimap(void) static int __init pcibios_init(void) { ict_pcimap(); + + loongson2e_pci_controller.io_map_base = + (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE, + loongson2e_pci_io_resource.end - + loongson2e_pci_io_resource.start + 1); + register_pci_controller(&loongson2e_pci_controller); return 0; diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c index 2cc6745991a..ebd6ceaef2f 100644 --- a/arch/mips/lemote/lm2e/setup.c +++ b/arch/mips/lemote/lm2e/setup.c @@ -34,6 +34,7 @@ #include <asm/mc146818-time.h> #include <asm/time.h> #include <asm/wbflush.h> +#include <asm/mach-lemote/pci.h> #ifdef CONFIG_VT #include <linux/console.h> @@ -42,12 +43,6 @@ extern void mips_reboot_setup(void); -#ifdef CONFIG_64BIT -#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p))) -#else -#define PTR_PAD(p) (p) -#endif - unsigned long cpu_clock_freq; unsigned long bus_clock; unsigned int memsize; @@ -80,8 +75,8 @@ static void wbflush_loongson2e(void) void __init plat_mem_setup(void) { - set_io_port_base(PTR_PAD(0xbfd00000)); - + set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE, + IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1)); mips_reboot_setup(); __wbflush = wbflush_loongson2e; diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 8810dfb915d..dbcf6511b74 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300) += dump_tlb.o obj-$(CONFIG_CPU_R4X00) += dump_tlb.o obj-$(CONFIG_CPU_R5000) += dump_tlb.o obj-$(CONFIG_CPU_R5432) += dump_tlb.o +obj-$(CONFIG_CPU_R5500) += dump_tlb.o obj-$(CONFIG_CPU_R6000) += obj-$(CONFIG_CPU_R8000) += obj-$(CONFIG_CPU_RM7000) += dump_tlb.o diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 465ff0ec85b..779821cd54a 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask) case PM_16M: return "16Mb"; case PM_64M: return "64Mb"; case PM_256M: return "256Mb"; + case PM_1G: return "1Gb"; #endif } return ""; diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index b08fc65c13a..7ec0b217dfd 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -1299,12 +1299,12 @@ static int __init debugfs_fpuemu(void) if (!mips_debugfs_dir) return -ENODEV; dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); - if (IS_ERR(dir)) - return PTR_ERR(dir); + if (!dir) + return -ENOMEM; for (i = 0; i < ARRAY_SIZE(vars); i++) { d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; } return 0; } diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 44e8dd8106b..95ba32b5b72 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o tlb-r4k.o +obj-$(CONFIG_CPU_R5500) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o tlb-r4k.o diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 891312f8e5a..5b98d0e731c 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -324,7 +324,6 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, if (cpu_is_noncoherent_r10000(dev)) __dma_sync((unsigned long)page_address(sg_page(sg)), sg->length, direction); - plat_unmap_dma_mem(sg->dma_address); } } @@ -342,7 +341,6 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele if (!plat_device_is_coherent(dev)) __dma_sync((unsigned long)page_address(sg_page(sg)), sg->length, direction); - plat_unmap_dma_mem(sg->dma_address); } } diff --git a/arch/mips/nxp/pnx833x/common/Makefile b/arch/mips/nxp/pnx833x/common/Makefile new file mode 100644 index 00000000000..4a16f3b503b --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/Makefile @@ -0,0 +1,3 @@ +obj-y := interrupts.o platform.o prom.o setup.o reset.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c new file mode 100644 index 00000000000..30533ba200e --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/interrupts.c @@ -0,0 +1,380 @@ +/* + * interrupts.c: Interrupt mappings for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/hardirq.h> +#include <linux/interrupt.h> +#include <asm/mipsregs.h> +#include <asm/irq_cpu.h> +#include <irq.h> +#include <irq-mapping.h> +#include <gpio.h> + +static int mips_cpu_timer_irq; + +static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] = +{ + 0, /* unused */ + 4, /* PNX833X_PIC_I2C0_INT 1 */ + 4, /* PNX833X_PIC_I2C1_INT 2 */ + 1, /* PNX833X_PIC_UART0_INT 3 */ + 1, /* PNX833X_PIC_UART1_INT 4 */ + 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ + 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ + 7, /* PNX833X_PIC_GPIO_INT 7 */ + 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ + 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ + 4, /* PNX833X_PIC_CONFIG_INT 10 */ + 4, /* PNX833X_PIC_AOI_INT 11 */ + 9, /* PNX833X_PIC_SYNC_INT 12 */ + 9, /* PNX8335_PIC_SATA_INT 13 */ + 4, /* PNX833X_PIC_OSD_INT 14 */ + 9, /* PNX833X_PIC_DISP1_INT 15 */ + 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ + 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ + 4, /* PNX833X_PIC_VC_INT 18 */ + 4, /* PNX833X_PIC_SC_INT 19 */ + 9, /* PNX833X_PIC_IDE_INT 20 */ + 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ + 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ + 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ + 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ + 4, /* PNX833X_PIC_TS_OUT_INT 25 */ + 4, /* PNX833X_PIC_IR_INT 26 */ + 3, /* PNX833X_PIC_VMSP1_INT 27 */ + 3, /* PNX833X_PIC_VMSP2_INT 28 */ + 4, /* PNX833X_PIC_PIBC_INT 29 */ + 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ + 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ + 5, /* PNX833X_PIC_USB_INT 32 */ + 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ + 4, /* PNX833X_PIC_CLOCK_INT 34 */ + 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ + 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ +#if defined(CONFIG_SOC_PNX8335) + 4, /* PNX8335_PIC_MIU_INT 37 */ + 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ + 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ + 9, /* PNX8335_PIC_DISP_HD_INT 40 */ + 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ + 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ + 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ + 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ + 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */ + 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */ + 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ + 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ + 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ + 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ + 4, /* PNX8335_PIC_PIBCS_INT 51 */ + 12, /* PNX8335_PIC_ETHERNET_INT 52 */ + 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ + 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ + 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ + 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ + 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ +#endif +}; + +static void pnx833x_timer_dispatch(void) +{ + do_IRQ(mips_cpu_timer_irq); +} + +static void pic_dispatch(void) +{ + unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC); + + if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) { + unsigned long priority = PNX833X_PIC_INT_PRIORITY; + PNX833X_PIC_INT_PRIORITY = irq_prio[irq]; + + if (irq == PNX833X_PIC_GPIO_INT) { + unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE; + int pin; + while ((pin = ffs(mask & 0xffff))) { + pin -= 1; + do_IRQ(PNX833X_GPIO_IRQ_BASE + pin); + mask &= ~(1 << pin); + } + } else { + do_IRQ(irq + PNX833X_PIC_IRQ_BASE); + } + + PNX833X_PIC_INT_PRIORITY = priority; + } else { + printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP4) + pic_dispatch(); + else if (pending & STATUSF_IP7) + do_IRQ(PNX833X_TIMER_IRQ); + else + spurious_interrupt(); +} + +static inline void pnx833x_hard_enable_pic_irq(unsigned int irq) +{ + /* Currently we do this by setting IRQ priority to 1. + If priority support is being implemented, 1 should be repalced + by a better value. */ + PNX833X_PIC_INT_REG(irq) = irq_prio[irq]; +} + +static inline void pnx833x_hard_disable_pic_irq(unsigned int irq) +{ + /* Disable IRQ by writing setting it's priority to 0 */ + PNX833X_PIC_INT_REG(irq) = 0; +} + +static int irqflags[PNX833X_PIC_NUM_IRQ]; /* initialized by zeroes */ +#define IRQFLAG_STARTED 1 +#define IRQFLAG_DISABLED 2 + +static DEFINE_SPINLOCK(pnx833x_irq_lock); + +static unsigned int pnx833x_startup_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */ + pnx833x_hard_enable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + return 0; +} + +static void pnx833x_shutdown_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] = 0; /* not started */ + pnx833x_hard_disable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_enable_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] &= ~IRQFLAG_DISABLED; + if (irqflags[pic_irq] == IRQFLAG_STARTED) + pnx833x_hard_enable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_disable_pic_irq(unsigned int irq) +{ + unsigned long flags; + unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; + + spin_lock_irqsave(&pnx833x_irq_lock, flags); + + irqflags[pic_irq] |= IRQFLAG_DISABLED; + pnx833x_hard_disable_pic_irq(pic_irq); + + spin_unlock_irqrestore(&pnx833x_irq_lock, flags); +} + +static void pnx833x_ack_pic_irq(unsigned int irq) +{ +} + +static void pnx833x_end_pic_irq(unsigned int irq) +{ +} + +static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); + +static unsigned int pnx833x_startup_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_enable_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + return 0; +} + +static void pnx833x_enable_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_enable_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static void pnx833x_disable_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_disable_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static void pnx833x_ack_gpio_irq(unsigned int irq) +{ +} + +static void pnx833x_end_gpio_irq(unsigned int irq) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + unsigned long flags; + spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + pnx833x_gpio_clear_irq(pin); + spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); +} + +static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) +{ + int pin = irq - PNX833X_GPIO_IRQ_BASE; + int gpio_mode; + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + gpio_mode = GPIO_INT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + gpio_mode = GPIO_INT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + gpio_mode = GPIO_INT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + gpio_mode = GPIO_INT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + gpio_mode = GPIO_INT_LEVEL_LOW; + break; + default: + gpio_mode = GPIO_INT_NONE; + break; + } + + pnx833x_gpio_setup_irq(gpio_mode, pin); + + return 0; +} + +static struct irq_chip pnx833x_pic_irq_type = { + .typename = "PNX-PIC", + .startup = pnx833x_startup_pic_irq, + .shutdown = pnx833x_shutdown_pic_irq, + .enable = pnx833x_enable_pic_irq, + .disable = pnx833x_disable_pic_irq, + .ack = pnx833x_ack_pic_irq, + .end = pnx833x_end_pic_irq +}; + +static struct irq_chip pnx833x_gpio_irq_type = { + .typename = "PNX-GPIO", + .startup = pnx833x_startup_gpio_irq, + .shutdown = pnx833x_disable_gpio_irq, + .enable = pnx833x_enable_gpio_irq, + .disable = pnx833x_disable_gpio_irq, + .ack = pnx833x_ack_gpio_irq, + .end = pnx833x_end_gpio_irq, + .set_type = pnx833x_set_type_gpio_irq +}; + +void __init arch_init_irq(void) +{ + unsigned int irq; + + /* setup standard internal cpu irqs */ + mips_cpu_irq_init(); + + /* Set IRQ information in irq_desc */ + for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) { + pnx833x_hard_disable_pic_irq(irq); + set_irq_chip_and_handler(irq, &pnx833x_pic_irq_type, handle_simple_irq); + } + + for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++) + set_irq_chip_and_handler(irq, &pnx833x_gpio_irq_type, handle_simple_irq); + + /* Set PIC priority limiter register to 0 */ + PNX833X_PIC_INT_PRIORITY = 0; + + /* Setup GPIO IRQ dispatching */ + pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT); + + /* Enable PIC IRQs (HWIRQ2) */ + if (cpu_has_vint) + set_vi_handler(4, pic_dispatch); + + write_c0_status(read_c0_status() | IE_IRQ2); +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ + if (cpu_has_vint) + set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch); + + mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + return mips_cpu_timer_irq; +} + +void __init plat_time_init(void) +{ + /* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */ + + extern unsigned long mips_hpt_frequency; + unsigned long reg = PNX833X_CLOCK_CPUCP_CTL; + + if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) { + /* Functional clock is disabled so use crystal frequency */ + mips_hpt_frequency = 25; + } else { +#if defined(CONFIG_SOC_PNX8335) + /* Functional clock is enabled, so get clock multiplier */ + mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ)); +#else + static const unsigned long int freq[4] = {240, 160, 120, 80}; + mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)]; +#endif + } + + printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency); + + mips_hpt_frequency *= 500000; +} + diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/nxp/pnx833x/common/platform.c new file mode 100644 index 00000000000..b1ccbcc18f7 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/platform.c @@ -0,0 +1,319 @@ +/* + * platform.c: platform support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/resource.h> +#include <linux/serial.h> +#include <linux/serial_pnx8xxx.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#ifdef CONFIG_I2C_PNX0105 +/* Until i2c driver available in kernel.*/ +#include <linux/i2c-pnx0105.h> +#endif + +#include <irq.h> +#include <irq-mapping.h> +#include <pnx833x.h> + +static u64 uart_dmamask = DMA_32BIT_MASK; + +static struct resource pnx833x_uart_resources[] = { + [0] = { + .start = PNX833X_UART0_PORTS_START, + .end = PNX833X_UART0_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX833X_PIC_UART0_INT, + .end = PNX833X_PIC_UART0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = PNX833X_UART1_PORTS_START, + .end = PNX833X_UART1_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = PNX833X_PIC_UART1_INT, + .end = PNX833X_PIC_UART1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct pnx8xxx_port pnx8xxx_ports[] = { + [0] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX833X_UART0_PORTS_START, + .mapbase = PNX833X_UART0_PORTS_START, + .irq = PNX833X_PIC_UART0_INT, + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX833X_UART1_PORTS_START, + .mapbase = PNX833X_UART1_PORTS_START, + .irq = PNX833X_PIC_UART1_INT, + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, +}; + +static struct platform_device pnx833x_uart_device = { + .name = "pnx8xxx-uart", + .id = -1, + .dev = { + .dma_mask = &uart_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = pnx8xxx_ports, + }, + .num_resources = ARRAY_SIZE(pnx833x_uart_resources), + .resource = pnx833x_uart_resources, +}; + +static u64 ehci_dmamask = DMA_32BIT_MASK; + +static struct resource pnx833x_usb_ehci_resources[] = { + [0] = { + .start = PNX833X_USB_PORTS_START, + .end = PNX833X_USB_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX833X_PIC_USB_INT, + .end = PNX833X_PIC_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_usb_ehci_device = { + .name = "pnx833x-ehci", + .id = -1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), + .resource = pnx833x_usb_ehci_resources, +}; + +#ifdef CONFIG_I2C_PNX0105 +static struct resource pnx833x_i2c0_resources[] = { + { + .start = PNX833X_I2C0_PORTS_START, + .end = PNX833X_I2C0_PORTS_END, + .flags = IORESOURCE_MEM, + }, + { + .start = PNX833X_PIC_I2C0_INT, + .end = PNX833X_PIC_I2C0_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource pnx833x_i2c1_resources[] = { + { + .start = PNX833X_I2C1_PORTS_START, + .end = PNX833X_I2C1_PORTS_END, + .flags = IORESOURCE_MEM, + }, + { + .start = PNX833X_PIC_I2C1_INT, + .end = PNX833X_PIC_I2C1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { + { + .base = PNX833X_I2C0_PORTS_START, + .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ + .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ + .bus_addr = 0, /* no slave support */ + }, + { + .base = PNX833X_I2C1_PORTS_START, + .irq = -1, /* on high freq, polling is faster */ + /*.irq = PNX833X_PIC_I2C1_INT,*/ + .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ + .bus_addr = 0, /* no slave support */ + }, +}; + +static struct platform_device pnx833x_i2c0_device = { + .name = "i2c-pnx0105", + .id = 0, + .dev = { + .platform_data = &pnx833x_i2c_dev[0], + }, + .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), + .resource = pnx833x_i2c0_resources, +}; + +static struct platform_device pnx833x_i2c1_device = { + .name = "i2c-pnx0105", + .id = 1, + .dev = { + .platform_data = &pnx833x_i2c_dev[1], + }, + .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), + .resource = pnx833x_i2c1_resources, +}; +#endif + +static u64 ethernet_dmamask = DMA_32BIT_MASK; + +static struct resource pnx833x_ethernet_resources[] = { + [0] = { + .start = PNX8335_IP3902_PORTS_START, + .end = PNX8335_IP3902_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8335_PIC_ETHERNET_INT, + .end = PNX8335_PIC_ETHERNET_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_ethernet_device = { + .name = "ip3902-eth", + .id = -1, + .dev = { + .dma_mask = ðernet_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), + .resource = pnx833x_ethernet_resources, +}; + +static struct resource pnx833x_sata_resources[] = { + [0] = { + .start = PNX8335_SATA_PORTS_START, + .end = PNX8335_SATA_PORTS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8335_PIC_SATA_INT, + .end = PNX8335_PIC_SATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pnx833x_sata_device = { + .name = "pnx833x-sata", + .id = -1, + .num_resources = ARRAY_SIZE(pnx833x_sata_resources), + .resource = pnx833x_sata_resources, +}; + +static const char *part_probes[] = { + "cmdlinepart", + NULL +}; + +static void +pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK)); + else + writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK)); +} + +static struct platform_nand_data pnx833x_flash_nand_data = { + .chip = { + .chip_delay = 25, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl + } +}; + +/* + * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!), + * 12 bytes more seems to be the standard that allows for NAND access. + */ +static struct resource pnx833x_flash_nand_resource = { + .start = PNX8335_NAND_BASE, + .end = PNX8335_NAND_BASE + 12, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pnx833x_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &pnx833x_flash_nand_resource, + .dev = { + .platform_data = &pnx833x_flash_nand_data, + }, +}; + +static struct platform_device *pnx833x_platform_devices[] __initdata = { + &pnx833x_uart_device, + &pnx833x_usb_ehci_device, +#ifdef CONFIG_I2C_PNX0105 + &pnx833x_i2c0_device, + &pnx833x_i2c1_device, +#endif + &pnx833x_ethernet_device, + &pnx833x_sata_device, + &pnx833x_flash_nand, +}; + +static int __init pnx833x_platform_init(void) +{ + int res; + + res = platform_add_devices(pnx833x_platform_devices, + ARRAY_SIZE(pnx833x_platform_devices)); + + return res; +} + +arch_initcall(pnx833x_platform_init); diff --git a/arch/mips/nxp/pnx833x/common/prom.c b/arch/mips/nxp/pnx833x/common/prom.c new file mode 100644 index 00000000000..2a41e8fec21 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/prom.c @@ -0,0 +1,70 @@ +/* + * prom.c: + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <asm/bootinfo.h> +#include <linux/string.h> + +void __init prom_init_cmdline(void) +{ + int argc = fw_arg0; + char **argv = (char **)fw_arg1; + char *c = &(arcs_cmdline[0]); + int i; + + for (i = 1; i < argc; i++) { + strcpy(c, argv[i]); + c += strlen(argv[i]); + if (i < argc-1) + *c++ = ' '; + } + *c = 0; +} + +char __init *prom_getenv(char *envname) +{ + extern char **prom_envp; + char **env = prom_envp; + int i; + + i = strlen(envname); + + while (*env) { + if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=') + return *env + i + 1; + env++; + } + + return 0; +} + +void __init prom_free_prom_memory(void) +{ +} + +char * __init prom_getcmdline(void) +{ + return arcs_cmdline; +} + diff --git a/arch/mips/nxp/pnx833x/common/reset.c b/arch/mips/nxp/pnx833x/common/reset.c new file mode 100644 index 00000000000..a9bc9bacad2 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/reset.c @@ -0,0 +1,45 @@ +/* + * reset.c: reset support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/slab.h> +#include <linux/reboot.h> +#include <pnx833x.h> + +void pnx833x_machine_restart(char *command) +{ + PNX833X_RESET_CONTROL_2 = 0; + PNX833X_RESET_CONTROL = 0; +} + +void pnx833x_machine_halt(void) +{ + while (1) + __asm__ __volatile__ ("wait"); + +} + +void pnx833x_machine_power_off(void) +{ + pnx833x_machine_halt(); +} diff --git a/arch/mips/nxp/pnx833x/common/setup.c b/arch/mips/nxp/pnx833x/common/setup.c new file mode 100644 index 00000000000..e51fbc4b644 --- /dev/null +++ b/arch/mips/nxp/pnx833x/common/setup.c @@ -0,0 +1,64 @@ +/* + * setup.c: Setup PNX833X Soc. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/pci.h> +#include <asm/reboot.h> +#include <pnx833x.h> +#include <gpio.h> + +extern void pnx833x_board_setup(void); +extern void pnx833x_machine_restart(char *); +extern void pnx833x_machine_halt(void); +extern void pnx833x_machine_power_off(void); + +int __init plat_mem_setup(void) +{ + /* fake pci bus to avoid bounce buffers */ + PCI_DMA_BUS_IS_PHYS = 1; + + /* set mips clock to 320MHz */ +#if defined(CONFIG_SOC_PNX8335) + PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ); +#endif + pnx833x_gpio_init(); /* so it will be ready in board_setup() */ + + pnx833x_board_setup(); + + _machine_restart = pnx833x_machine_restart; + _machine_halt = pnx833x_machine_halt; + pm_power_off = pnx833x_machine_power_off; + + /* IO/MEM resources. */ + set_io_port_base(KSEG1); + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + return 0; +} diff --git a/arch/mips/nxp/pnx833x/stb22x/Makefile b/arch/mips/nxp/pnx833x/stb22x/Makefile new file mode 100644 index 00000000000..f81c5801f45 --- /dev/null +++ b/arch/mips/nxp/pnx833x/stb22x/Makefile @@ -0,0 +1,3 @@ +lib-y := board.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/nxp/pnx833x/stb22x/board.c new file mode 100644 index 00000000000..90cc604bdad --- /dev/null +++ b/arch/mips/nxp/pnx833x/stb22x/board.c @@ -0,0 +1,133 @@ +/* + * board.c: STB225 board support. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * Based on software written by: + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/init.h> +#include <asm/bootinfo.h> +#include <linux/mm.h> +#include <pnx833x.h> +#include <gpio.h> + +/* endianess twiddlers */ +#define PNX8335_DEBUG0 0x4400 +#define PNX8335_DEBUG1 0x4404 +#define PNX8335_DEBUG2 0x4408 +#define PNX8335_DEBUG3 0x440c +#define PNX8335_DEBUG4 0x4410 +#define PNX8335_DEBUG5 0x4414 +#define PNX8335_DEBUG6 0x4418 +#define PNX8335_DEBUG7 0x441c + +int prom_argc; +char **prom_argv = 0, **prom_envp = 0; + +extern void prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP STB22x"; +} + +static inline unsigned long env_or_default(char *env, unsigned long dfl) +{ + char *str = prom_getenv(env); + return str ? simple_strtol(str, 0, 0) : dfl; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize = env_or_default("memsize", 0x02000000); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void __init pnx833x_board_setup(void) +{ + pnx833x_gpio_select_function_alt(4); + pnx833x_gpio_select_output(4); + pnx833x_gpio_select_function_alt(5); + pnx833x_gpio_select_input(5); + pnx833x_gpio_select_function_alt(6); + pnx833x_gpio_select_input(6); + pnx833x_gpio_select_function_alt(7); + pnx833x_gpio_select_output(7); + + pnx833x_gpio_select_function_alt(25); + pnx833x_gpio_select_function_alt(26); + + pnx833x_gpio_select_function_alt(27); + pnx833x_gpio_select_function_alt(28); + pnx833x_gpio_select_function_alt(29); + pnx833x_gpio_select_function_alt(30); + pnx833x_gpio_select_function_alt(31); + pnx833x_gpio_select_function_alt(32); + pnx833x_gpio_select_function_alt(33); + +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + /* Setup MIU for NAND access on CS0... + * + * (it seems that we must also configure CS1 for reliable operation, + * otherwise the first read ID command will fail if it's read as 4 bytes + * but pass if it's read as 1 word.) + */ + + /* Setup MIU CS0 & CS1 timing */ + PNX833X_MIU_SEL0 = 0; + PNX833X_MIU_SEL1 = 0; + PNX833X_MIU_SEL0_TIMING = 0x50003081; + PNX833X_MIU_SEL1_TIMING = 0x50003081; + + /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ + pnx833x_gpio_select_function_alt(0); + + /* Setup GPIO 04 to input NAND read/busy signal */ + pnx833x_gpio_select_function_io(4); + pnx833x_gpio_select_input(4); + + /* Setup GPIO 05 to disable NAND write protect */ + pnx833x_gpio_select_function_io(5); + pnx833x_gpio_select_output(5); + pnx833x_gpio_write(1, 5); + +#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE) + + /* Set up MIU for 16-bit NOR access on CS0 and CS1... */ + + /* Setup MIU CS0 & CS1 timing */ + PNX833X_MIU_SEL0 = 1; + PNX833X_MIU_SEL1 = 1; + PNX833X_MIU_SEL0_TIMING = 0x6A08D082; + PNX833X_MIU_SEL1_TIMING = 0x6A08D082; + + /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ + pnx833x_gpio_select_function_alt(0); +#endif +} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index b1886244ced..e8a97f59e06 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o +obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c index 846eae9cdd0..fba5aad00d5 100644 --- a/arch/mips/pci/fixup-emma2rh.c +++ b/arch/mips/pci/fixup-emma2rh.c @@ -30,7 +30,7 @@ #include <asm/bootinfo.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define EMMA2RH_PCI_HOST_SLOT 0x09 #define EMMA2RH_USB_SLOT 0x03 diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c index 75b90dcb7a0..3d86823d03a 100644 --- a/arch/mips/pci/fixup-rc32434.c +++ b/arch/mips/pci/fixup-rc32434.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <asm/mach-rc32434/rc32434.h> +#include <asm/mach-rc32434/irq.h> static int __devinitdata irq_map[2][12] = { {0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1}, diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c index d31bfc6d415..5947a70b0b7 100644 --- a/arch/mips/pci/ops-emma2rh.c +++ b/arch/mips/pci/ops-emma2rh.c @@ -30,7 +30,7 @@ #include <asm/addrspace.h> #include <asm/debug.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> #define RTABORT (0x1<<9) #define RMABORT (0x1<<10) diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c index 772e283daa6..2df4190232c 100644 --- a/arch/mips/pci/pci-emma2rh.c +++ b/arch/mips/pci/pci-emma2rh.c @@ -30,7 +30,7 @@ #include <asm/bootinfo.h> -#include <asm/emma2rh/emma2rh.h> +#include <asm/emma/emma2rh.h> static struct resource pci_io_resource = { .name = "pci IO space", diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 31619c601b1..2f22d714d5b 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -280,7 +280,7 @@ static int __init plat_setup_devices(void) { /* Look for the CF card reader */ if (!readl(IDT434_REG_BASE + DEV1MASK)) - rb532_devs[1] = NULL; + rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */ else { cf_slot0_res[0].start = readl(IDT434_REG_BASE + DEV1BASE); diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 76a7fd96d56..70c4a672637 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -310,6 +310,10 @@ int __init rb532_gpio_init(void) return -ENXIO; } + /* Set the interrupt status and level for the CF pin */ + rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1); + rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0); + return 0; } arch_initcall(rb532_gpio_init); diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index f6d9bf4b26e..f8b18af141a 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -12,20 +12,11 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> #include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> #include <asm/irq_cpu.h> -#include <asm/sgi/ioc.h> #include <asm/sgi/hpc3.h> #include <asm/sgi/ip22.h> -#include <asm/time.h> - -/* #define DEBUG_SGINT */ /* So far nothing hangs here */ #undef USE_LIO3_IRQ @@ -68,7 +59,7 @@ static void enable_local1_irq(unsigned int irq) sgint->imask1 |= (1 << (irq - SGINT_LOCAL1)); } -void disable_local1_irq(unsigned int irq) +static void disable_local1_irq(unsigned int irq) { sgint->imask1 &= ~(1 << (irq - SGINT_LOCAL1)); } @@ -87,7 +78,7 @@ static void enable_local2_irq(unsigned int irq) sgint->cmeimask0 |= (1 << (irq - SGINT_LOCAL2)); } -void disable_local2_irq(unsigned int irq) +static void disable_local2_irq(unsigned int irq) { sgint->cmeimask0 &= ~(1 << (irq - SGINT_LOCAL2)); if (!sgint->cmeimask0) @@ -108,7 +99,7 @@ static void enable_local3_irq(unsigned int irq) sgint->cmeimask1 |= (1 << (irq - SGINT_LOCAL3)); } -void disable_local3_irq(unsigned int irq) +static void disable_local3_irq(unsigned int irq) { sgint->cmeimask1 &= ~(1 << (irq - SGINT_LOCAL3)); if (!sgint->cmeimask1) @@ -344,6 +335,6 @@ void __init arch_init_irq(void) #ifdef CONFIG_EISA if (ip22_is_fullhouse()) /* Only Indigo-2 has EISA stuff */ - ip22_eisa_init(); + ip22_eisa_init(); #endif } diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 17052db4161..226e8bb2f0a 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -46,9 +46,10 @@ config TOSHIBA_RBTX4938 support this machine type config TOSHIBA_RBTX4939 - bool "Toshiba RBTX4939 bobard" + bool "Toshiba RBTX4939 board" depends on MACH_TX49XX select SOC_TX4939 + select TXX9_7SEGLED help This Toshiba board is based on the TX4939 processor. Say Y here to support this machine type @@ -86,6 +87,9 @@ config SOC_TX4939 select HW_HAS_PCI select PCI_TX4927 +config TXX9_7SEGLED + bool + config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on PCI && MACH_TXX9 diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c new file mode 100644 index 00000000000..727ab21b661 --- /dev/null +++ b/arch/mips/txx9/generic/7segled.c @@ -0,0 +1,112 @@ +/* + * 7 Segment LED routines + * Based on RBTX49xx patch from CELF patch archive. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright TOSHIBA CORPORATION 2005-2007 + * All Rights Reserved. + */ +#include <linux/sysdev.h> +#include <linux/slab.h> +#include <linux/map_to_7segment.h> +#include <asm/txx9/generic.h> + +static unsigned int tx_7segled_num; +static void (*tx_7segled_putc)(unsigned int pos, unsigned char val); + +void __init txx9_7segled_init(unsigned int num, + void (*putc)(unsigned int pos, unsigned char val)) +{ + tx_7segled_num = num; + tx_7segled_putc = putc; +} + +static SEG7_CONVERSION_MAP(txx9_seg7map, MAP_ASCII7SEG_ALPHANUM_LC); + +int txx9_7segled_putc(unsigned int pos, char c) +{ + if (pos >= tx_7segled_num) + return -EINVAL; + c = map_to_seg7(&txx9_seg7map, c); + if (c < 0) + return c; + tx_7segled_putc(pos, c); + return 0; +} + +static ssize_t ascii_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t size) +{ + unsigned int ch = dev->id; + txx9_7segled_putc(ch, buf[0]); + return size; +} + +static ssize_t raw_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t size) +{ + unsigned int ch = dev->id; + tx_7segled_putc(ch, buf[0]); + return size; +} + +static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store); +static SYSDEV_ATTR(raw, 0200, NULL, raw_store); + +static ssize_t map_seg7_show(struct sysdev_class *class, char *buf) +{ + memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map)); + return sizeof(txx9_seg7map); +} + +static ssize_t map_seg7_store(struct sysdev_class *class, + const char *buf, size_t size) +{ + if (size != sizeof(txx9_seg7map)) + return -EINVAL; + memcpy(&txx9_seg7map, buf, size); + return size; +} + +static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store); + +static struct sysdev_class tx_7segled_sysdev_class = { + .name = "7segled", +}; + +static int __init tx_7segled_init_sysfs(void) +{ + int error, i; + if (!tx_7segled_num) + return -ENODEV; + error = sysdev_class_register(&tx_7segled_sysdev_class); + if (error) + return error; + error = sysdev_class_create_file(&tx_7segled_sysdev_class, + &attr_map_seg7); + if (error) + return error; + for (i = 0; i < tx_7segled_num; i++) { + struct sys_device *dev; + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + error = -ENODEV; + break; + } + dev->id = i; + dev->cls = &tx_7segled_sysdev_class; + error = sysdev_register(dev); + if (!error) { + sysdev_create_file(dev, &attr_ascii); + sysdev_create_file(dev, &attr_raw); + } + } + return error; +} + +device_initcall(tx_7segled_init_sysfs); diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 0030d23bef5..f2579ce054a 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -10,5 +10,6 @@ obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_SPI) += spi_eeprom.o +obj-$(CONFIG_TXX9_7SEGLED) += 7segled.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5526375010f..a13a08b8c9e 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -156,11 +156,23 @@ static struct txx9_board_vec *__init find_board_byname(const char *name) static void __init prom_init_cmdline(void) { - int argc = (int)fw_arg0; - int *argv32 = (int *)fw_arg1; + int argc; + int *argv32; int i; /* Always ignore the "-c" at argv[0] */ char builtin[CL_SIZE]; + if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { + /* + * argc is not a valid number, or argv32 is not a valid + * pointer + */ + argc = 0; + argv32 = NULL; + } else { + argc = (int)fw_arg0; + argv32 = (int *)fw_arg1; + } + /* ignore all built-in args if any f/w args given */ /* * But if built-in strings was started with '+', append them @@ -414,10 +426,12 @@ char * __init prom_getcmdline(void) const char *__init prom_getenv(const char *name) { - const s32 *str = (const s32 *)fw_arg2; + const s32 *str; - if (!str) + if (fw_arg2 < CKSEG0) return NULL; + + str = (const s32 *)fw_arg2; /* YAMON style ("name", "value" pairs) */ while (str[0] && str[1]) { if (!strcmp((const char *)(unsigned long)str[0], name)) @@ -622,6 +636,21 @@ unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; EXPORT_SYMBOL(__swizzle_addr_b); #endif +#ifdef NEEDS_TXX9_IOSWABW +static u16 ioswabw_default(volatile u16 *a, u16 x) +{ + return le16_to_cpu(x); +} +static u16 __mem_ioswabw_default(volatile u16 *a, u16 x) +{ + return x; +} +u16 (*ioswabw)(volatile u16 *a, u16 x) = ioswabw_default; +EXPORT_SYMBOL(ioswabw); +u16 (*__mem_ioswabw)(volatile u16 *a, u16 x) = __mem_ioswabw_default; +EXPORT_SYMBOL(__mem_ioswabw); +#endif + void __init txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, const struct physmap_flash_data *pdata) diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 9855d7bccc2..6daee9b1cd5 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -14,6 +14,8 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/interrupt.h> +#include <linux/smc91x.h> #include <asm/reboot.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> @@ -33,6 +35,21 @@ static void __init rbtx4939_time_init(void) tx4939_time_init(0); } +#if defined(__BIG_ENDIAN) && \ + (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) +#define HAVE_RBTX4939_IOSWAB +#define IS_CE1_ADDR(addr) \ + ((((unsigned long)(addr) - IO_BASE) & 0xfff00000) == TXX9_CE(1)) +static u16 rbtx4939_ioswabw(volatile u16 *a, u16 x) +{ + return IS_CE1_ADDR(a) ? x : le16_to_cpu(x); +} +static u16 rbtx4939_mem_ioswabw(volatile u16 *a, u16 x) +{ + return !IS_CE1_ADDR(a) ? x : le16_to_cpu(x); +} +#endif /* __BIG_ENDIAN && CONFIG_SMC91X */ + static void __init rbtx4939_pci_setup(void) { #ifdef CONFIG_PCI @@ -239,6 +256,32 @@ static inline void rbtx4939_led_setup(void) } #endif +static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val) +{ +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) + unsigned long flags; + local_irq_save(flags); + /* bit7: reserved for LED class */ + led_val[pos] = (led_val[pos] & 0x80) | (val & 0x7f); + val = led_val[pos]; + local_irq_restore(flags); +#endif + writeb(val, rbtx4939_7seg_addr(pos / 4, pos % 4)); +} + +static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val) +{ + /* convert from map_to_seg7() notation */ + val = (val & 0x88) | + ((val & 0x40) >> 6) | + ((val & 0x20) >> 4) | + ((val & 0x10) >> 2) | + ((val & 0x04) << 2) | + ((val & 0x02) << 4) | + ((val & 0x01) << 6); + __rbtx4939_7segled_putc(pos, val); +} + static void __init rbtx4939_arch_init(void) { rbtx4939_pci_setup(); @@ -246,6 +289,22 @@ static void __init rbtx4939_arch_init(void) static void __init rbtx4939_device_init(void) { + unsigned long smc_addr = RBTX4939_ETHER_ADDR - IO_BASE; + struct resource smc_res[] = { + { + .start = smc_addr, + .end = smc_addr + 0x10 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RBTX4939_IRQ_ETHER, + /* override default irq flag defined in smc91x.h */ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, + }; + struct smc91x_platdata smc_pdata = { + .flags = SMC91X_USE_16BIT, + }; + struct platform_device *pdev; #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) int i, j; unsigned char ethaddr[2][6]; @@ -262,6 +321,12 @@ static void __init rbtx4939_device_init(void) } tx4939_ethaddr_init(ethaddr[0], ethaddr[1]); #endif + pdev = platform_device_alloc("smc91x", -1); + if (!pdev || + platform_device_add_resources(pdev, smc_res, ARRAY_SIZE(smc_res)) || + platform_device_add_data(pdev, &smc_pdata, sizeof(smc_pdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); @@ -269,6 +334,8 @@ static void __init rbtx4939_device_init(void) static void __init rbtx4939_setup(void) { + int i; + rbtx4939_ebusc_setup(); /* always enable ATA0 */ txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE); @@ -276,9 +343,16 @@ static void __init rbtx4939_setup(void) if (txx9_master_clock == 0) txx9_master_clock = 20000000; tx4939_setup(); +#ifdef HAVE_RBTX4939_IOSWAB + ioswabw = rbtx4939_ioswabw; + __mem_ioswabw = rbtx4939_mem_ioswabw; +#endif _machine_restart = rbtx4939_machine_restart; + txx9_7segled_init(RBTX4939_MAX_7SEGLEDS, rbtx4939_7segled_putc); + for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) + txx9_7segled_putc(i, '-'); pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr), readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr)); diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 70b7645ce74..8116a3328a1 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -241,19 +241,17 @@ config PACK_STACK Say Y if you are unsure. config SMALL_STACK - bool "Use 4kb/8kb for kernel stack instead of 8kb/16kb" - depends on PACK_STACK && !LOCKDEP + bool "Use 8kb for kernel stack instead of 16kb" + depends on PACK_STACK && 64BIT && !LOCKDEP help If you say Y here and the compiler supports the -mkernel-backchain - option the kernel will use a smaller kernel stack size. For 31 bit - the reduced size is 4kb instead of 8kb and for 64 bit it is 8kb - instead of 16kb. This allows to run more thread on a system and - reduces the pressure on the memory management for higher order - page allocations. + option the kernel will use a smaller kernel stack size. The reduced + size is 8kb instead of 16kb. This allows to run more threads on a + system and reduces the pressure on the memory management for higher + order page allocations. Say N if you are unsure. - config CHECK_STACK bool "Detect kernel stack overflow" help @@ -384,7 +382,7 @@ config IPL choice prompt "IPL method generated into head.S" depends on IPL - default IPL_TAPE + default IPL_VM help Select "tape" if you want to IPL the image from a Tape. diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index a7f8979fb92..a06a47cdd5e 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -424,7 +424,7 @@ out: */ int appldata_register_ops(struct appldata_ops *ops) { - if ((ops->size > APPLDATA_MAX_REC_SIZE) || (ops->size < 0)) + if (ops->size > APPLDATA_MAX_REC_SIZE) return -EINVAL; ops->ctl_table = kzalloc(4 * sizeof(struct ctl_table), GFP_KERNEL); diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h index 146100224de..c13568b9351 100644 --- a/arch/s390/include/asm/kvm_virtio.h +++ b/arch/s390/include/asm/kvm_virtio.h @@ -52,7 +52,7 @@ struct kvm_vqconfig { #ifdef __KERNEL__ /* early virtio console setup */ -#ifdef CONFIG_VIRTIO_CONSOLE +#ifdef CONFIG_S390_GUEST extern void s390_virtio_console_init(void); #else static inline void s390_virtio_console_init(void) diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h index 5dd5e7b3476..d2b4ff83147 100644 --- a/arch/s390/include/asm/mmu.h +++ b/arch/s390/include/asm/mmu.h @@ -7,7 +7,8 @@ typedef struct { unsigned long asce_bits; unsigned long asce_limit; int noexec; - int pgstes; + int has_pgste; /* The mmu context has extended page tables */ + int alloc_pgste; /* cloned contexts will have extended page tables */ } mm_context_t; #endif diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index 4c2fbf48c9c..28ec870655a 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -20,12 +20,25 @@ static inline int init_new_context(struct task_struct *tsk, #ifdef CONFIG_64BIT mm->context.asce_bits |= _ASCE_TYPE_REGION3; #endif - if (current->mm->context.pgstes) { + if (current->mm->context.alloc_pgste) { + /* + * alloc_pgste indicates, that any NEW context will be created + * with extended page tables. The old context is unchanged. The + * page table allocation and the page table operations will + * look at has_pgste to distinguish normal and extended page + * tables. The only way to create extended page tables is to + * set alloc_pgste and then create a new context (e.g. dup_mm). + * The page table allocation is called after init_new_context + * and if has_pgste is set, it will create extended page + * tables. + */ mm->context.noexec = 0; - mm->context.pgstes = 1; + mm->context.has_pgste = 1; + mm->context.alloc_pgste = 1; } else { mm->context.noexec = s390_noexec; - mm->context.pgstes = 0; + mm->context.has_pgste = 0; + mm->context.alloc_pgste = 0; } mm->context.asce_limit = STACK_TOP_MAX; crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm)); diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 1a928f84afd..7fc76133b3e 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -679,7 +679,7 @@ static inline void pmd_clear(pmd_t *pmd) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - if (mm->context.pgstes) + if (mm->context.has_pgste) ptep_rcp_copy(ptep); pte_val(*ptep) = _PAGE_TYPE_EMPTY; if (mm->context.noexec) @@ -763,7 +763,7 @@ static inline int kvm_s390_test_and_clear_page_dirty(struct mm_struct *mm, struct page *page; unsigned int skey; - if (!mm->context.pgstes) + if (!mm->context.has_pgste) return -EINVAL; rcp_lock(ptep); pgste = (unsigned long *) (ptep + PTRS_PER_PTE); @@ -794,7 +794,7 @@ static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, int young; unsigned long *pgste; - if (!vma->vm_mm->context.pgstes) + if (!vma->vm_mm->context.has_pgste) return 0; physpage = pte_val(*ptep) & PAGE_MASK; pgste = (unsigned long *) (ptep + PTRS_PER_PTE); @@ -844,7 +844,7 @@ static inline void __ptep_ipte(unsigned long address, pte_t *ptep) static inline void ptep_invalidate(struct mm_struct *mm, unsigned long address, pte_t *ptep) { - if (mm->context.pgstes) { + if (mm->context.has_pgste) { rcp_lock(ptep); __ptep_ipte(address, ptep); ptep_rcp_copy(ptep); diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index de3fad60c68..c1eaf9604da 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -15,13 +15,8 @@ * Size of kernel stack for each process */ #ifndef __s390x__ -#ifndef __SMALL_STACK #define THREAD_ORDER 1 #define ASYNC_ORDER 1 -#else -#define THREAD_ORDER 0 -#define ASYNC_ORDER 0 -#endif #else /* __s390x__ */ #ifndef __SMALL_STACK #define THREAD_ORDER 2 diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 9e8b1f9b8f4..b5595688a47 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -1119,9 +1119,7 @@ out: return rc; } -static ssize_t __ref rescan_store(struct sys_device *dev, - struct sysdev_attribute *attr, - const char *buf, +static ssize_t __ref rescan_store(struct sysdev_class *class, const char *buf, size_t count) { int rc; @@ -1129,12 +1127,10 @@ static ssize_t __ref rescan_store(struct sys_device *dev, rc = smp_rescan_cpus(); return rc ? rc : count; } -static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store); +static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store); #endif /* CONFIG_HOTPLUG_CPU */ -static ssize_t dispatching_show(struct sys_device *dev, - struct sysdev_attribute *attr, - char *buf) +static ssize_t dispatching_show(struct sysdev_class *class, char *buf) { ssize_t count; @@ -1144,9 +1140,8 @@ static ssize_t dispatching_show(struct sys_device *dev, return count; } -static ssize_t dispatching_store(struct sys_device *dev, - struct sysdev_attribute *attr, - const char *buf, size_t count) +static ssize_t dispatching_store(struct sysdev_class *dev, const char *buf, + size_t count) { int val, rc; char delim; @@ -1168,7 +1163,8 @@ out: put_online_cpus(); return rc ? rc : count; } -static SYSDEV_ATTR(dispatching, 0644, dispatching_show, dispatching_store); +static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show, + dispatching_store); static int __init topology_init(void) { @@ -1178,13 +1174,11 @@ static int __init topology_init(void) register_cpu_notifier(&smp_cpu_nb); #ifdef CONFIG_HOTPLUG_CPU - rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj, - &attr_rescan.attr); + rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_rescan); if (rc) return rc; #endif - rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj, - &attr_dispatching.attr); + rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_dispatching); if (rc) return rc; for_each_present_cpu(cpu) { diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 3d98ba82ea6..ef3635b52fc 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -169,7 +169,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm) unsigned long *table; unsigned long bits; - bits = (mm->context.noexec || mm->context.pgstes) ? 3UL : 1UL; + bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; spin_lock(&mm->page_table_lock); page = NULL; if (!list_empty(&mm->context.pgtable_list)) { @@ -186,7 +186,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm) pgtable_page_ctor(page); page->flags &= ~FRAG_MASK; table = (unsigned long *) page_to_phys(page); - if (mm->context.pgstes) + if (mm->context.has_pgste) clear_table_pgstes(table); else clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE); @@ -210,7 +210,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) struct page *page; unsigned long bits; - bits = (mm->context.noexec || mm->context.pgstes) ? 3UL : 1UL; + bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long); page = pfn_to_page(__pa(table) >> PAGE_SHIFT); spin_lock(&mm->page_table_lock); @@ -257,7 +257,7 @@ int s390_enable_sie(void) struct mm_struct *mm, *old_mm; /* Do we have pgstes? if yes, we are done */ - if (tsk->mm->context.pgstes) + if (tsk->mm->context.has_pgste) return 0; /* lets check if we are allowed to replace the mm */ @@ -269,14 +269,14 @@ int s390_enable_sie(void) } task_unlock(tsk); - /* we copy the mm with pgstes enabled */ - tsk->mm->context.pgstes = 1; + /* we copy the mm and let dup_mm create the page tables with_pgstes */ + tsk->mm->context.alloc_pgste = 1; mm = dup_mm(tsk); - tsk->mm->context.pgstes = 0; + tsk->mm->context.alloc_pgste = 0; if (!mm) return -ENOMEM; - /* Now lets check again if somebody attached ptrace etc */ + /* Now lets check again if something happened */ task_lock(tsk); if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) { diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index aeadd00411a..a67b8e7c712 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -49,6 +49,17 @@ #define DRV_NAME "ahci" #define DRV_VERSION "3.0" +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 + static int ahci_skip_host_reset; module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); @@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg) struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; unsigned long led_message = emp->led_state; u32 activity_led_state; + unsigned long flags; - led_message &= 0xffff0000; + led_message &= EM_MSG_LED_VALUE; led_message |= ap->port_no | (link->pmp << 8); /* check to see if we've had activity. If so, * toggle state of LED and reset timer. If not, * turn LED to desired idle state. */ + spin_lock_irqsave(ap->lock, flags); if (emp->saved_activity != emp->activity) { emp->saved_activity = emp->activity; /* get the current LED state */ - activity_led_state = led_message & 0x00010000; + activity_led_state = led_message & EM_MSG_LED_VALUE_ON; if (activity_led_state) activity_led_state = 0; @@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg) activity_led_state = 1; /* clear old state */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; /* toggle state */ led_message |= (activity_led_state << 16); mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); } else { /* switch to idle */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; if (emp->blink_policy == BLINK_OFF) led_message |= (1 << 16); } + spin_unlock_irqrestore(ap->lock, flags); ahci_transmit_led_message(ap, led_message, 4); } @@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, struct ahci_em_priv *emp; /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, message[0] |= (4 << 8); /* ignore 0:4 of byte zero, fill in port info yourself */ - message[1] = ((state & 0xfffffff0) | ap->port_no); + message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); /* write message to EM_LOC */ writel(message[0], mmio + hpriv->em_loc); @@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, state = simple_strtoul(buf, NULL, 0); /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, * activity led through em_message */ if (emp->blink_policy) - state &= 0xfff8ffff; + state &= ~EM_MSG_LED_VALUE_ACTIVITY; return ahci_transmit_led_message(ap, state, size); } @@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); /* set the LED to OFF */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); ahci_transmit_led_message(ap, port_led_state, 4); } else { link->flags |= ATA_LFLAG_SW_ACTIVITY; if (val == BLINK_OFF) { /* set LED to ON for idle */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); - port_led_state |= 0x00010000; /* check this */ + port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ ahci_transmit_led_message(ap, port_led_state, 4); } } @@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 em_loc = readl(mmio + HOST_EM_LOC); u32 em_ctl = readl(mmio + HOST_EM_CTL); - messages = (em_ctl & 0x000f0000) >> 16; + messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; /* we only support LED message type right now */ if ((messages & 0x01) && (ahci_em_messages == 1)) { diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 75a406f5e69..5c33767e66d 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -1,6 +1,6 @@ /* * ata_generic.c - Generic PATA/SATA controller driver. - * Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005 Red Hat Inc, all rights reserved. * * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index e9e32ed6b1a..52dc2d8b8f2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -14,7 +14,7 @@ * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8cb0b360bfd..2ff633c119e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4156,29 +4156,33 @@ static int cable_is_40wire(struct ata_port *ap) struct ata_link *link; struct ata_device *dev; - /* If the controller thinks we are 40 wire, we are */ + /* If the controller thinks we are 40 wire, we are. */ if (ap->cbl == ATA_CBL_PATA40) return 1; - /* If the controller thinks we are 80 wire, we are */ + + /* If the controller thinks we are 80 wire, we are. */ if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) return 0; - /* If the system is known to be 40 wire short cable (eg laptop), - then we allow 80 wire modes even if the drive isn't sure */ + + /* If the system is known to be 40 wire short cable (eg + * laptop), then we allow 80 wire modes even if the drive + * isn't sure. + */ if (ap->cbl == ATA_CBL_PATA40_SHORT) return 0; - /* If the controller doesn't know we scan - - - Note: We look for all 40 wire detects at this point. - Any 80 wire detect is taken to be 80 wire cable - because - - In many setups only the one drive (slave if present) - will give a valid detect - - If you have a non detect capable drive you don't - want it to colour the choice - */ + + /* If the controller doesn't know, we scan. + * + * Note: We look for all 40 wire detects at this point. Any + * 80 wire detect is taken to be 80 wire cable because + * - in many setups only the one drive (slave if present) will + * give a valid detect + * - if you have a non detect capable drive you don't want it + * to colour the choice + */ ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) { - if (!ata_is_40wire(dev)) + if (ata_dev_enabled(dev) && !ata_is_40wire(dev)) return 0; } } @@ -4553,6 +4557,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: command tag * * LOCKING: * None. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 5d687d7cffa..8077bdf5d30 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host) ata_link_for_each_dev(dev, link) { int devno = dev->devno; + if (!ata_dev_enabled(dev)) + continue; + ehc->saved_xfer_mode[devno] = dev->xfer_mode; if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; @@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev) { struct ata_link *link = dev->link; struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; unsigned long flags; ata_dev_disable(dev); @@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev) ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } - /* clear per-dev EH actions */ + /* clear per-dev EH info */ ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK); ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK); + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); spin_unlock_irqrestore(ap->lock, flags); } @@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ ata_link_for_each_dev(dev, link) { + if (!ata_dev_enabled(dev)) + continue; + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { struct ata_ering_entry *ent; @@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + if (!ata_dev_enabled(dev)) + continue; + if (dev->xfer_mode != saved_xfer_mode || ata_ncq_enabled(dev) != saved_ncq) dev->flags |= ATA_DFLAG_DUBIOUS_XFER; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 4b95c4387e9..bbb30d882f0 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1107,6 +1107,15 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); + + /* + * If this device is behind a port multiplier, we have + * to share the tag map between all devices on that PMP. + * Set up the shared tag map here and we get automatic. + */ + if (dev->link->ap->pmp_link) + scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); scsi_activate_tcq(sdev, depth); } diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index eb919c16a03..e2e332d8ff9 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -1,7 +1,7 @@ /* * ACPI PATA driver * - * (c) 2007 Red Hat <alan@redhat.com> + * (c) 2007 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 5ca70fa1f58..73c466e452c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -1,7 +1,6 @@ /* * pata_ali.c - ALI 15x3 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based in part upon * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 57dd00f463d..0ec9c7d9fe9 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -1,7 +1,6 @@ /* * pata_amd.c - AMD PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on pata-sil680. Errata information is taken from data sheets * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 0f513bc1119..6b3092c75ff 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -1,7 +1,7 @@ /* * pata_artop.c - ARTOP ATA controller driver * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on drivers/ide/pci/aec62xx.c diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index e8a0d99d735..0e2cde8f997 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -1,7 +1,6 @@ /* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 2de30b99027..34a394264c3 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -1,7 +1,6 @@ /* * pata_cmd640.c - CMD640 PCI PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based upon * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index ddd09b7d98c..3167d8fed2f 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -1,7 +1,7 @@ /* * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 0c4b271a9d5..bba453381f4 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -1,7 +1,6 @@ /* * pata-cs5530.c - CS5530 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon cs5530.c by Mark Lord. * diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index f1b6556f048..1b2d4a0f5f7 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -1,7 +1,7 @@ /* * pata-cs5535.c - CS5535 PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 2ff62608ae3..d546425cd38 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -1,7 +1,7 @@ /* * pata_cypress.c - Cypress PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox * * Based heavily on * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 9fba82976ba..ac6392ea35b 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -1,7 +1,7 @@ /* * pata_efar.c - EFAR PIIX clone controller driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 6a111baab52..15cdb9148aa 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -1,7 +1,7 @@ /* * pata-isapnp.c - ISA PnP PATA controller driver. - * Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat Inc, all rights reserved. * * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> */ diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 0221c9a4676..860ede52628 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -1,7 +1,7 @@ /* * pata_it821x.c - IT821x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * based upon @@ -10,7 +10,7 @@ * * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 * - * Copyright (C) 2004 Red Hat <alan@redhat.com> + * Copyright (C) 2004 Red Hat * * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. @@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev, if (strstr(model_num, "Integrated Technology Express")) { /* Set feature bits the firmware neglects */ id[49] |= 0x0300; /* LBA, DMA */ - id[82] |= 0x0400; /* LBA48 */ id[83] &= 0x7FFF; - id[83] |= 0x4000; /* Word 83 is valid */ + id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 73b7596816b..38cf1ab2d28 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -4,7 +4,7 @@ * driven by AHCI in the usual configuration although * this driver can handle other setups if we need it. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index bc037ffce20..930c2208640 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -1,6 +1,6 @@ /* * pata-legacy.c - Legacy port PATA/SATA controller driver. - * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat, all rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 0d87eec8496..76e399bf8c1 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -5,7 +5,7 @@ * isn't making full use of the device functionality but it is * easy to get working. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 7d7e3fdab71..7c8faa48b5f 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -1,7 +1,7 @@ /* * pata_mpiix.c - Intel MPIIX PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * The MPIIX is different enough to the PIIX4 and friends that we give it * a separate driver. The old ide/pci code handles this by just not tuning diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index d9719c8b9db..9dc05e1656a 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -1,7 +1,7 @@ /* * pata_netcell.c - Netcell PATA driver * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 565e67cd13f..4e466eae8b4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -1,7 +1,6 @@ /* * pata_ninja32.c - Ninja32 PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Note: The controller like many controllers has shared timings for * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back @@ -45,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.0.1" +#define DRV_VERSION "0.1.1" /** @@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = { .set_piomode = ninja32_set_piomode, }; +static void ninja32_program(void __iomem *base) +{ + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x01, base + 0x03); /* Unknown */ + iowrite8(0x20, base + 0x04); /* WAIT0 */ + iowrite8(0x8f, base + 0x05); /* Unknown */ + iowrite8(0xa4, base + 0x1c); /* Unknown */ + iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ +} + static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ata_host *host; @@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); - iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ - iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ - iowrite8(0x01, base + 0x03); /* Unknown */ - iowrite8(0x20, base + 0x04); /* WAIT0 */ - iowrite8(0x8f, base + 0x05); /* Unknown */ - iowrite8(0xa4, base + 0x1c); /* Unknown */ - iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ + ninja32_program(base); /* FIXME: Should we disable them at remove ? */ return ata_host_activate(host, dev->irq, ata_sff_interrupt, IRQF_SHARED, &ninja32_sht); } +#ifdef CONFIG_PM + +static int ninja32_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ninja32_program(host->iomap[0]); + ata_host_resume(host); + return 0; +} +#endif + static const struct pci_device_id ninja32[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, @@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = { .name = DRV_NAME, .id_table = ninja32, .probe = ninja32_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ninja32_reinit_one, +#endif }; static int __init ninja32_init(void) diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index be756b7ef07..40d411c460d 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -1,7 +1,6 @@ /* * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index e0aa7eaaee0..89bf5f865d6 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -1,7 +1,7 @@ /* * pata_ns87415.c - NS87415 (non PARISC) PATA * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk> * * This is a fairly generic MWDMA controller. It has some limitations * as it requires timing reloads on PIO/DMA transitions but it is otherwise diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index df64f244300..c0dbc46a348 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -1,7 +1,7 @@ /* * pata_oldpiix.c - Intel PATA/SATA controllers * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index fb2cf661b0e..e4fa4d565e9 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -1,7 +1,6 @@ /* * pata_opti.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 4cd74445631..93bb6e91973 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -1,7 +1,6 @@ /* * pata_optidma.c - Opti DMA PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * The Opti DMA controllers are related to the older PIO PCI controllers * and indeed the VLB ones. The main differences are that the timing diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 02b596b9cf6..271cb64d429 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -1,6 +1,6 @@ /* * pata_pcmcia.c - PCMCIA PATA controller driver. - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * <openembedded@hrw.one.pl> * diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index d2673060bc8..799a6a09871 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -1,7 +1,7 @@ /* * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 8f65ad61b8a..77e4e3b17f5 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -5,7 +5,7 @@ * * Based on pata_pcmcia: * - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 63b7a1c165a..3080f371222 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -1,6 +1,6 @@ /* * pata_qdi.c - QDI VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * This driver mostly exists as a proof of concept for non PCI devices under * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1c0d9fa7ee5..0b0aa452de1 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -1,7 +1,7 @@ /* * pata_radisys.c - Intel PATA/SATA controllers * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk> * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 0278fd2b8fb..9a4bdca5461 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -1,5 +1,5 @@ /* - * New ATA layer SC1200 driver Alan Cox <alan@redhat.com> + * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk> * * TODO: Mode selection filtering * TODO: Can't enable second channel until ATA core has serialize diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 16673d16857..cf3707e516a 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -8,7 +8,7 @@ * Copyright 2003-2005 Jeff Garzik * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * and drivers/ata/ahci.c: * Copyright 2004-2005 Red Hat, Inc. diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index ffd26d0dc50..72e41c9f969 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -1,7 +1,6 @@ /* * pata_serverworks.c - Serverworks PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a598bb36aaf..83580a59db5 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -1,7 +1,6 @@ /* * pata_sil680.c - SIL680 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 26345d7b531..d3423661175 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -1,7 +1,7 @@ /* * pata_sis.c - SiS ATA driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 69877bd8181..1b0e7b6d8ef 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -1,7 +1,6 @@ /* * pata_sl82c105.c - SL82C105 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based in part on linux/drivers/ide/pci/sl82c105.c * SL82C105/Winbond 553 IDE driver diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index b181261f274..ef9597517cd 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -1,7 +1,7 @@ /* * pata_triflex.c - Compaq PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon * diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 8fdb2ce7321..681169c9c64 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -1,7 +1,6 @@ /* * pata_via.c - VIA PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Documentation * Most chipset documentation available under NDA only diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index a7606b044a6..319e164a3d7 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -1,6 +1,6 @@ /* * pata_winbond.c - Winbond VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * Support for the Winbond 83759A when operating in advanced mode. * Multichip mode is not currently supported. diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 4621807a1a6..ccee930f1e1 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + /* Set max read request size to 4096. This slightly increases + * write throughput for pci-e variants. + */ + pcie_set_readrq(pdev, 4096); + sil24_init_controller(host); pci_set_master(pdev); diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 58630cc1eff..cda6c7cc944 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -152,7 +152,7 @@ static int btsdio_rx_packet(struct btsdio_data *data) err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4); if (err < 0) { - kfree(skb); + kfree_skb(skb); return err; } diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c index c422e870dc5..cd0ba51f7c8 100644 --- a/drivers/char/hw_random/amd-rng.c +++ b/drivers/char/hw_random/amd-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index fed4ef5569f..64d513f6836 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 8a2fce0756e..5dcbe603eca 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index 128202e18fc..4e9573c1d39 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 251416f2148..8e16bfbdcb3 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -476,6 +476,7 @@ static int ar_context_add_page(struct ar_context *ctx) if (ab == NULL) return -ENOMEM; + ab->next = NULL; memset(&ab->descriptor, 0, sizeof(ab->descriptor)); ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | DESCRIPTOR_STATUS | @@ -496,6 +497,21 @@ static int ar_context_add_page(struct ar_context *ctx) return 0; } +static void ar_context_release(struct ar_context *ctx) +{ + struct ar_buffer *ab, *ab_next; + size_t offset; + dma_addr_t ab_bus; + + for (ab = ctx->current_buffer; ab; ab = ab_next) { + ab_next = ab->next; + offset = offsetof(struct ar_buffer, data); + ab_bus = le32_to_cpu(ab->descriptor.data_address) - offset; + dma_free_coherent(ctx->ohci->card.device, PAGE_SIZE, + ab, ab_bus); + } +} + #if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) #define cond_le32_to_cpu(v) \ (ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v)) @@ -2349,8 +2365,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { - fw_error("Could not malloc fw_ohci data.\n"); - return -ENOMEM; + err = -ENOMEM; + goto fail; } fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev); @@ -2359,7 +2375,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) err = pci_enable_device(dev); if (err) { - fw_error("Failed to enable OHCI hardware.\n"); + fw_error("Failed to enable OHCI hardware\n"); goto fail_free; } @@ -2427,9 +2443,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci->ir_context_list = kzalloc(size, GFP_KERNEL); if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) { - fw_error("Out of memory for it/ir contexts.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } /* self-id dma buffer allocation */ @@ -2438,9 +2453,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) &ohci->self_id_bus, GFP_KERNEL); if (ohci->self_id_cpu == NULL) { - fw_error("Out of memory for self ID buffer.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } bus_options = reg_read(ohci, OHCI1394_BusOptions); @@ -2460,9 +2474,13 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_self_id: dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); - fail_registers: - kfree(ohci->it_context_list); + fail_contexts: kfree(ohci->ir_context_list); + kfree(ohci->it_context_list); + context_release(&ohci->at_response_ctx); + context_release(&ohci->at_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + ar_context_release(&ohci->ar_request_ctx); pci_iounmap(dev, ohci->registers); fail_iomem: pci_release_region(dev, 0); @@ -2471,6 +2489,9 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_free: kfree(&ohci->card); ohci_pmac_off(dev); + fail: + if (err == -ENOMEM) + fw_error("Out of memory\n"); return err; } @@ -2491,8 +2512,19 @@ static void pci_remove(struct pci_dev *dev) software_reset(ohci); free_irq(dev->irq, ohci); + + if (ohci->next_config_rom && ohci->next_config_rom != ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->next_config_rom, ohci->next_config_rom_bus); + if (ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->config_rom, ohci->config_rom_bus); dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); + ar_context_release(&ohci->ar_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + context_release(&ohci->at_request_ctx); + context_release(&ohci->at_response_ctx); kfree(ohci->it_context_list); kfree(ohci->ir_context_list); pci_iounmap(dev, ohci->registers); diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index ef0b9b419c2..d334cac5e1f 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -173,6 +173,9 @@ struct sbp2_target { int blocked; /* ditto */ }; +/* Impossible login_id, to detect logout attempt before successful login */ +#define INVALID_LOGIN_ID 0x10000 + /* * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be * provided in the config rom. Most devices do provide a value, which @@ -788,9 +791,20 @@ static void sbp2_release_target(struct kref *kref) scsi_remove_device(sdev); scsi_device_put(sdev); } - sbp2_send_management_orb(lu, tgt->node_id, lu->generation, - SBP2_LOGOUT_REQUEST, lu->login_id, NULL); - + if (lu->login_id != INVALID_LOGIN_ID) { + int generation, node_id; + /* + * tgt->node_id may be obsolete here if we failed + * during initial login or after a bus reset where + * the topology changed. + */ + generation = device->generation; + smp_rmb(); /* node_id vs. generation */ + node_id = device->node_id; + sbp2_send_management_orb(lu, node_id, generation, + SBP2_LOGOUT_REQUEST, + lu->login_id, NULL); + } fw_core_remove_address_handler(&lu->address_handler); list_del(&lu->link); kfree(lu); @@ -805,19 +819,20 @@ static void sbp2_release_target(struct kref *kref) static struct workqueue_struct *sbp2_wq; +static void sbp2_target_put(struct sbp2_target *tgt) +{ + kref_put(&tgt->kref, sbp2_release_target); +} + /* * Always get the target's kref when scheduling work on one its units. * Each workqueue job is responsible to call sbp2_target_put() upon return. */ static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay) { - if (queue_delayed_work(sbp2_wq, &lu->work, delay)) - kref_get(&lu->tgt->kref); -} - -static void sbp2_target_put(struct sbp2_target *tgt) -{ - kref_put(&tgt->kref, sbp2_release_target); + kref_get(&lu->tgt->kref); + if (!queue_delayed_work(sbp2_wq, &lu->work, delay)) + sbp2_target_put(lu->tgt); } /* @@ -978,6 +993,7 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) lu->tgt = tgt; lu->lun = lun_entry & 0xffff; + lu->login_id = INVALID_LOGIN_ID; lu->retries = 0; lu->has_sdev = false; lu->blocked = false; @@ -1147,7 +1163,7 @@ static int sbp2_probe(struct device *dev) /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) - sbp2_queue_work(lu, 0); + sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); return 0; fail_tgt_put: diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c1b81077c4a..5e204713002 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -413,7 +413,7 @@ static void update_tree(struct fw_card *card, struct fw_node *root) { struct list_head list0, list1; - struct fw_node *node0, *node1; + struct fw_node *node0, *node1, *next1; int i, event; INIT_LIST_HEAD(&list0); @@ -485,7 +485,9 @@ update_tree(struct fw_card *card, struct fw_node *root) } node0 = fw_node(node0->link.next); - node1 = fw_node(node1->link.next); + next1 = fw_node(node1->link.next); + fw_node_put(node1); + node1 = next1; } } diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index 027f58ce81a..aed7dbb17cd 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -248,7 +248,7 @@ struct fw_card { struct fw_node *local_node; struct fw_node *root_node; struct fw_node *irm_node; - int color; + u8 color; /* must be u8 to match the definition in struct fw_node */ int gap_count; bool beta_repeaters_present; diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c index ce238f59b3c..be3a15f5b25 100644 --- a/drivers/input/misc/sgi_btns.c +++ b/drivers/input/misc/sgi_btns.c @@ -174,5 +174,6 @@ static void __exit sgi_buttons_exit(void) platform_driver_unregister(&sgi_buttons_driver); } +MODULE_LICENSE("GPL"); module_init(sgi_buttons_init); module_exit(sgi_buttons_exit); diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c index f1fddb18d70..2768c69257f 100644 --- a/drivers/leds/leds-da903x.c +++ b/drivers/leds/leds-da903x.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/workqueue.h> #include <linux/mfd/da903x.h> #define DA9030_LED1_CONTROL 0x20 diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 5749f22b296..079e6aa874d 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -328,7 +328,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, lbs_deb_rx("rx err: frame received with bad length\n"); priv->stats.rx_length_errors++; ret = -EINVAL; - kfree(skb); + kfree_skb(skb); goto done; } diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 023803dbb0c..ae18baf59f0 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -76,7 +76,7 @@ tapeblock_trigger_requeue(struct tape_device *device) static void tapeblock_end_request(struct request *req, int error) { - if (__blk_end_request(req, error, blk_rq_bytes(req))) + if (blk_end_request(req, error, blk_rq_bytes(req))) BUG(); } @@ -166,7 +166,7 @@ tapeblock_requeue(struct work_struct *work) { nr_queued++; spin_unlock(get_ccwdev_lock(device->cdev)); - spin_lock(&device->blk_data.request_queue_lock); + spin_lock_irq(&device->blk_data.request_queue_lock); while ( !blk_queue_plugged(queue) && elv_next_request(queue) && @@ -176,7 +176,9 @@ tapeblock_requeue(struct work_struct *work) { if (rq_data_dir(req) == WRITE) { DBF_EVENT(1, "TBLOCK: Rejecting write request\n"); blkdev_dequeue_request(req); + spin_unlock_irq(&device->blk_data.request_queue_lock); tapeblock_end_request(req, -EIO); + spin_lock_irq(&device->blk_data.request_queue_lock); continue; } blkdev_dequeue_request(req); diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index d7073dbf825..f9bb51fa7f5 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -1200,7 +1200,7 @@ tape_open(struct tape_device *device) { int rc; - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_NOT_OPER) { DBF_EVENT(6, "TAPE:nodev\n"); rc = -ENODEV; @@ -1218,7 +1218,7 @@ tape_open(struct tape_device *device) tape_state_set(device, TS_IN_USE); rc = 0; } - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return rc; } @@ -1228,11 +1228,11 @@ tape_open(struct tape_device *device) int tape_release(struct tape_device *device) { - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_IN_USE) tape_state_set(device, TS_UNUSED); module_put(device->discipline->owner); - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return 0; } diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index b5390821434..f05590355be 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -20,6 +20,7 @@ static struct dentry *debugfs_root; #define MAX_DEBUGFS_QUEUES 32 static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL }; static DEFINE_MUTEX(debugfs_mutex); +#define QDIO_DEBUGFS_NAME_LEN 40 void qdio_allocate_do_dbf(struct qdio_initialize *init_data) { @@ -152,17 +153,6 @@ static int qstat_seq_open(struct inode *inode, struct file *filp) filp->f_path.dentry->d_inode->i_private); } -static void get_queue_name(struct qdio_q *q, struct ccw_device *cdev, char *name) -{ - memset(name, 0, sizeof(name)); - sprintf(name, "%s", dev_name(&cdev->dev)); - if (q->is_input_q) - sprintf(name + strlen(name), "_input"); - else - sprintf(name + strlen(name), "_output"); - sprintf(name + strlen(name), "_%d", q->nr); -} - static void remove_debugfs_entry(struct qdio_q *q) { int i; @@ -189,14 +179,17 @@ static struct file_operations debugfs_fops = { static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev) { int i = 0; - char name[40]; + char name[QDIO_DEBUGFS_NAME_LEN]; while (debugfs_queues[i] != NULL) { i++; if (i >= MAX_DEBUGFS_QUEUES) return; } - get_queue_name(q, cdev, name); + snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d", + dev_name(&cdev->dev), + q->is_input_q ? "input" : "output", + q->nr); debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR, debugfs_root, q, &debugfs_fops); } diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index a50682d2a0f..7c865915199 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1083,7 +1083,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, case -EIO: sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no); QDIO_DBF_TEXT2(1, setup, dbf_text); - qdio_int_error(cdev); return; case -ETIMEDOUT: sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no); diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c index cfd29da714d..0376ac66c44 100644 --- a/fs/coda/psdev.c +++ b/fs/coda/psdev.c @@ -2,7 +2,7 @@ * An implementation of a loadable kernel mode driver providing * multiple kernel/user space bidirectional communications links. * - * Author: Alan Cox <alan@redhat.com> + * Author: Alan Cox <alan@lxorguk.ukuu.org.uk> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index b9195c02a86..dc52793ff8f 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -5,7 +5,7 @@ * * nfs inode and superblock handling functions * - * Modularised by Alan Cox <Alan.Cox@linux.org>, while hacking some + * Modularised by Alan Cox <alan@lxorguk.ukuu.org.uk>, while hacking some * experimental NFS changes. Modularisation taken straight from SYS5 fs. * * Change to nfs_read_super() to permit NFS mounts to multi-homed hosts. diff --git a/fs/nfs/super.c b/fs/nfs/super.c index a3b0061dfd4..f48db679a1c 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -5,7 +5,7 @@ * * nfs superblock handling functions * - * Modularised by Alan Cox <Alan.Cox@linux.org>, while hacking some + * Modularised by Alan Cox <alan@lxorguk.ukuu.org.uk>, while hacking some * experimental NFS changes. Modularisation taken straight from SYS5 fs. * * Change to nfs_read_super() to permit NFS mounts to multi-homed hosts. diff --git a/fs/proc/array.c b/fs/proc/array.c index bb9f4b05703..6af7fba7abb 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -40,7 +40,7 @@ * * * Alan Cox : security fixes. - * <Alan.Cox@linux.org> + * <alan@lxorguk.ukuu.org.uk> * * Al Viro : safe handling of mm_struct * diff --git a/include/linux/phonet.h b/include/linux/phonet.h index c9609f9aeda..4157faa857b 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -72,6 +72,7 @@ struct phonetmsg { } pn_msg_u; }; #define PN_COMMON_MESSAGE 0xF0 +#define PN_COMMGR 0x10 #define PN_PREFIX 0xE0 /* resource for extended messages */ #define pn_submsg_id pn_msg_u.base.pn_submsg_id #define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id diff --git a/include/net/phonet/phonet.h b/include/net/phonet/phonet.h index d4e72508e14..c6a24518446 100644 --- a/include/net/phonet/phonet.h +++ b/include/net/phonet/phonet.h @@ -27,7 +27,7 @@ * The lower layers may not require more space, ever. Make sure it's * enough. */ -#define MAX_PHONET_HEADER 8 +#define MAX_PHONET_HEADER (8 + MAX_HEADER) /* * Every Phonet* socket has this structure first in its diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index cf4c219c0b5..17231385cb3 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -140,8 +140,18 @@ static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag) */ static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth) { - shost->bqt = blk_init_tags(depth); - return shost->bqt ? 0 : -ENOMEM; + /* + * If the shared tag map isn't already initialized, do it now. + * This saves callers from having to check ->bqt when setting up + * devices on the shared host (for libata) + */ + if (!shost->bqt) { + shost->bqt = blk_init_tags(depth); + if (!shost->bqt) + return -ENOMEM; + } + + return 0; } /** diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index e4c5ac9fe89..ba85d883189 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2279,6 +2279,11 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst, } memset(&opts, 0, sizeof(opts)); +#ifdef CONFIG_SYN_COOKIES + if (unlikely(req->cookie_ts)) + TCP_SKB_CB(skb)->when = cookie_init_timestamp(req); + else +#endif TCP_SKB_CB(skb)->when = tcp_time_stamp; tcp_header_size = tcp_synack_options(sk, req, mss, skb, &opts, &md5) + @@ -2304,11 +2309,6 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst, /* RFC1323: The window in SYN & SYN/ACK segments is never scaled. */ th->window = htons(min(req->rcv_wnd, 65535U)); -#ifdef CONFIG_SYN_COOKIES - if (unlikely(req->cookie_ts)) - TCP_SKB_CB(skb)->when = cookie_init_timestamp(req); - else -#endif tcp_options_write((__be32 *)(th + 1), tp, &opts, &md5_hash_location); th->doff = (tcp_header_size >> 2); TCP_INC_STATS(sock_net(sk), TCP_MIB_OUTSEGS); diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index b9d97effebe..defeb7a0d50 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -261,6 +261,8 @@ static inline int can_respond(struct sk_buff *skb) return 0; /* we are not the destination */ if (ph->pn_res == PN_PREFIX && !pskb_may_pull(skb, 5)) return 0; + if (ph->pn_res == PN_COMMGR) /* indications */ + return 0; ph = pn_hdr(skb); /* re-acquires the pointer */ pm = pn_msg(skb); @@ -309,7 +311,8 @@ static int send_reset_indications(struct sk_buff *rskb) return pn_raw_send(data, sizeof(data), rskb->dev, pn_object(oph->pn_sdev, 0x00), - pn_object(oph->pn_rdev, oph->pn_robj), 0x10); + pn_object(oph->pn_rdev, oph->pn_robj), + PN_COMMGR); } diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c index eb9bc365530..c180598f171 100644 --- a/sound/oss/kahlua.c +++ b/sound/oss/kahlua.c @@ -1,7 +1,7 @@ /* * Initialisation code for Cyrix/NatSemi VSA1 softaudio * - * (C) Copyright 2003 Red Hat Inc <alan@redhat.com> + * (C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk> * * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems. * The older version (VSA1) provides fairly good soundblaster emulation diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c index 92f3a976ef2..a7f38e63303 100644 --- a/sound/pci/ad1889.c +++ b/sound/pci/ad1889.c @@ -932,7 +932,7 @@ snd_ad1889_create(struct snd_card *card, goto free_and_ret; chip->bar = pci_resource_start(pci, 0); - chip->iobase = ioremap_nocache(chip->bar, pci_resource_len(pci, 0)); + chip->iobase = pci_ioremap_bar(pci, 0); if (chip->iobase == NULL) { printk(KERN_ERR PFX "unable to reserve region.\n"); err = -EBUSY; diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index 085a52b8c80..226fe8237d3 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -1609,7 +1609,7 @@ static int __devinit snd_atiixp_create(struct snd_card *card, return err; } chip->addr = pci_resource_start(pci, 0); - chip->remap_addr = ioremap_nocache(chip->addr, pci_resource_len(pci, 0)); + chip->remap_addr = pci_ioremap_bar(pci, 0); if (chip->remap_addr == NULL) { snd_printk(KERN_ERR "AC'97 space ioremap problem\n"); snd_atiixp_free(chip); diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c index 2f106306c7f..0e6e5cc1c50 100644 --- a/sound/pci/atiixp_modem.c +++ b/sound/pci/atiixp_modem.c @@ -1252,7 +1252,7 @@ static int __devinit snd_atiixp_create(struct snd_card *card, return err; } chip->addr = pci_resource_start(pci, 0); - chip->remap_addr = ioremap_nocache(chip->addr, pci_resource_len(pci, 0)); + chip->remap_addr = pci_ioremap_bar(pci, 0); if (chip->remap_addr == NULL) { snd_printk(KERN_ERR "AC'97 space ioremap problem\n"); snd_atiixp_free(chip); diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c index 68368e49007..a36d4d1fd41 100644 --- a/sound/pci/au88x0/au88x0.c +++ b/sound/pci/au88x0/au88x0.c @@ -180,8 +180,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) if ((err = pci_request_regions(pci, CARD_NAME_SHORT)) != 0) goto regions_out; - chip->mmio = ioremap_nocache(pci_resource_start(pci, 0), - pci_resource_len(pci, 0)); + chip->mmio = pci_ioremap_bar(pci, 0); if (!chip->mmio) { printk(KERN_ERR "MMIO area remap failed.\n"); err = -ENOMEM; diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 3aa8d973540..1aa1c040254 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -749,8 +749,7 @@ static int __devinit snd_bt87x_create(struct snd_card *card, pci_disable_device(pci); return err; } - chip->mmio = ioremap_nocache(pci_resource_start(pci, 0), - pci_resource_len(pci, 0)); + chip->mmio = pci_ioremap_bar(pci, 0); if (!chip->mmio) { snd_printk(KERN_ERR "cannot remap io memory\n"); err = -ENOMEM; diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c index ef9308f7c45..192e7842e18 100644 --- a/sound/pci/cs4281.c +++ b/sound/pci/cs4281.c @@ -1382,8 +1382,8 @@ static int __devinit snd_cs4281_create(struct snd_card *card, chip->ba0_addr = pci_resource_start(pci, 0); chip->ba1_addr = pci_resource_start(pci, 1); - chip->ba0 = ioremap_nocache(chip->ba0_addr, pci_resource_len(pci, 0)); - chip->ba1 = ioremap_nocache(chip->ba1_addr, pci_resource_len(pci, 1)); + chip->ba0 = pci_ioremap_bar(pci, 0); + chip->ba1 = pci_ioremap_bar(pci, 1); if (!chip->ba0 || !chip->ba1) { snd_cs4281_free(chip); return -ENOMEM; diff --git a/sound/pci/cs5530.c b/sound/pci/cs5530.c index 7ff8b68e997..6dea5b5cc77 100644 --- a/sound/pci/cs5530.c +++ b/sound/pci/cs5530.c @@ -2,7 +2,7 @@ * cs5530.c - Initialisation code for Cyrix/NatSemi VSA1 softaudio * * (C) Copyright 2007 Ash Willis <ashwillis@programmer.net> - * (C) Copyright 2003 Red Hat Inc <alan@redhat.com> + * (C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk> * * This driver was ported (shamelessly ripped ;) from oss/kahlua.c but I did * mess with it a bit. The chip seems to have to have trouble with full duplex @@ -132,7 +132,7 @@ static int __devinit snd_cs5530_create(struct snd_card *card, } chip->pci_base = pci_resource_start(pci, 0); - mem = ioremap_nocache(chip->pci_base, pci_resource_len(pci, 0)); + mem = pci_ioremap_bar(pci, 0); if (mem == NULL) { kfree(chip); pci_disable_device(pci); diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9f316c1b279..f080f8ce0ec 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2158,7 +2158,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, } chip->addr = pci_resource_start(pci, 0); - chip->remap_addr = ioremap_nocache(chip->addr, pci_resource_len(pci,0)); + chip->remap_addr = pci_ioremap_bar(pci, 0); if (chip->remap_addr == NULL) { snd_printk(KERN_ERR SFX "ioremap error\n"); err = -ENXIO; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ef4955c73c8..4eceab9bd10 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -307,6 +307,13 @@ struct alc_spec { /* for PLL fix */ hda_nid_t pll_nid; unsigned int pll_coef_idx, pll_coef_bit; + +#ifdef SND_HDA_NEEDS_RESUME +#define ALC_MAX_PINS 16 + unsigned int num_pins; + hda_nid_t pin_nids[ALC_MAX_PINS]; + unsigned int pin_cfgs[ALC_MAX_PINS]; +#endif }; /* @@ -2778,6 +2785,64 @@ static void alc_free(struct hda_codec *codec) codec->spec = NULL; /* to be sure */ } +#ifdef SND_HDA_NEEDS_RESUME +static void store_pin_configs(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + hda_nid_t nid, end_nid; + + end_nid = codec->start_nid + codec->num_nodes; + for (nid = codec->start_nid; nid < end_nid; nid++) { + unsigned int wid_caps = get_wcaps(codec, nid); + unsigned int wid_type = + (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; + if (wid_type != AC_WID_PIN) + continue; + if (spec->num_pins >= ARRAY_SIZE(spec->pin_nids)) + break; + spec->pin_nids[spec->num_pins] = nid; + spec->pin_cfgs[spec->num_pins] = + snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_CONFIG_DEFAULT, 0); + spec->num_pins++; + } +} + +static void resume_pin_configs(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + int i; + + for (i = 0; i < spec->num_pins; i++) { + hda_nid_t pin_nid = spec->pin_nids[i]; + unsigned int pin_config = spec->pin_cfgs[i]; + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, + pin_config & 0x000000ff); + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, + (pin_config & 0x0000ff00) >> 8); + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, + (pin_config & 0x00ff0000) >> 16); + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, + pin_config >> 24); + } +} + +static int alc_resume(struct hda_codec *codec) +{ + resume_pin_configs(codec); + codec->patch_ops.init(codec); + snd_hda_codec_resume_amp(codec); + snd_hda_codec_resume_cache(codec); + return 0; +} +#else +#define store_pin_configs(codec) +#endif + /* */ static struct hda_codec_ops alc_patch_ops = { @@ -2786,6 +2851,9 @@ static struct hda_codec_ops alc_patch_ops = { .init = alc_init, .free = alc_free, .unsol_event = alc_unsol_event, +#ifdef SND_HDA_NEEDS_RESUME + .resume = alc_resume, +#endif #ifdef CONFIG_SND_HDA_POWER_SAVE .check_power_status = alc_check_power_status, #endif @@ -3832,6 +3900,7 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux; + store_pin_configs(codec); return 1; } @@ -5250,6 +5319,7 @@ static int alc260_parse_auto_config(struct hda_codec *codec) } spec->num_mixers++; + store_pin_configs(codec); return 1; } @@ -10313,6 +10383,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + store_pin_configs(codec); return 1; } @@ -11447,6 +11518,7 @@ static int alc268_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + store_pin_configs(codec); return 1; } @@ -12230,6 +12302,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec) spec->mixers[spec->num_mixers] = alc269_capture_mixer; spec->num_mixers++; + store_pin_configs(codec); return 1; } @@ -13316,6 +13389,7 @@ static int alc861_parse_auto_config(struct hda_codec *codec) spec->mixers[spec->num_mixers] = alc861_capture_mixer; spec->num_mixers++; + store_pin_configs(codec); return 1; } @@ -14427,6 +14501,7 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + store_pin_configs(codec); return 1; } @@ -16258,6 +16333,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec) spec->mixers[spec->num_mixers] = alc662_capture_mixer; spec->num_mixers++; + + store_pin_configs(codec); return 1; } diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c index 2d0dce649a6..ae7601f353a 100644 --- a/sound/pci/mixart/mixart.c +++ b/sound/pci/mixart/mixart.c @@ -1314,8 +1314,7 @@ static int __devinit snd_mixart_probe(struct pci_dev *pci, } for (i = 0; i < 2; i++) { mgr->mem[i].phys = pci_resource_start(pci, i); - mgr->mem[i].virt = ioremap_nocache(mgr->mem[i].phys, - pci_resource_len(pci, i)); + mgr->mem[i].virt = pci_ioremap_bar(pci, i); if (!mgr->mem[i].virt) { printk(KERN_ERR "unable to remap resource 0x%lx\n", mgr->mem[i].phys); diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c index 827587f0818..e020c160ee4 100644 --- a/sound/soc/blackfin/bf5xx-i2s.c +++ b/sound/soc/blackfin/bf5xx-i2s.c @@ -70,12 +70,24 @@ static struct sport_param sport_params[2] = { } }; -static u16 sport_req[][7] = { - { P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0}, - { P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0}, -}; +/* + * Setting the TFS pin selector for SPORT 0 based on whether the selected + * port id F or G. If the port is F then no conflict should exist for the + * TFS. When Port G is selected and EMAC then there is a conflict between + * the PHY interrupt line and TFS. Current settings prevent the conflict + * by ignoring the TFS pin when Port G is selected. This allows both + * ssm2602 using Port G and EMAC concurrently. + */ +#ifdef CONFIG_BF527_SPORT0_PORTF +#define LOCAL_SPORT0_TFS (P_SPORT0_TFS) +#else +#define LOCAL_SPORT0_TFS (0) +#endif + +static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0}, + {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI, + P_SPORT1_RSCLK, P_SPORT1_TFS, 0} }; static int bf5xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) @@ -98,23 +110,21 @@ static int bf5xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, ret = -EINVAL; break; default: + printk(KERN_ERR "%s: Unknown DAI format type\n", __func__); ret = -EINVAL; break; } switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBS_CFS: - ret = -EINVAL; - break; - case SND_SOC_DAIFMT_CBM_CFS: - ret = -EINVAL; - break; case SND_SOC_DAIFMT_CBM_CFM: break; + case SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_CBM_CFS: case SND_SOC_DAIFMT_CBS_CFM: ret = -EINVAL; break; default: + printk(KERN_ERR "%s: Unknown DAI master type\n", __func__); ret = -EINVAL; break; } diff --git a/sound/sound_core.c b/sound/sound_core.c index faef87a9bc3..a75b289a5d7 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -57,7 +57,7 @@ module_exit(cleanup_soundcore); /* * OSS sound core handling. Breaks out sound functions to submodules * - * Author: Alan Cox <alan.cox@linux.org> + * Author: Alan Cox <alan@lxorguk.ukuu.org.uk> * * Fixes: * |