aboutsummaryrefslogtreecommitdiff
path: root/Documentation/DocBook/dvb/frontend.xml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/DocBook/dvb/frontend.xml')
-rw-r--r--Documentation/DocBook/dvb/frontend.xml1765
1 files changed, 1765 insertions, 0 deletions
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
new file mode 100644
index 00000000000..91a749f70cb
--- /dev/null
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -0,0 +1,1765 @@
+<title>DVB Frontend API</title>
+
+<para>The DVB frontend device controls the tuner and DVB demodulator
+hardware. It can be accessed through <emphasis
+role="tt">/dev/dvb/adapter0/frontend0</emphasis>. Data types and and
+ioctl definitions can be accessed by including <emphasis
+role="tt">linux/dvb/frontend.h</emphasis> in your application.</para>
+
+<para>DVB frontends come in three varieties: DVB-S (satellite), DVB-C
+(cable) and DVB-T (terrestrial). Transmission via the internet (DVB-IP)
+is not yet handled by this API but a future extension is possible. For
+DVB-S the frontend device also supports satellite equipment control
+(SEC) via DiSEqC and V-SEC protocols. The DiSEqC (digital SEC)
+specification is available from Eutelsat <emphasis
+role="tt">http://www.eutelsat.org/</emphasis>.</para>
+
+<para>Note that the DVB API may also be used for MPEG decoder-only PCI
+cards, in which case there exists no frontend device.</para>
+
+<section id="frontend_types">
+<title>Frontend Data Types</title>
+
+<section id="frontend_type">
+<title>frontend type</title>
+
+<para>For historical reasons frontend types are named after the type of modulation used in
+transmission.</para>
+<programlisting>
+ typedef enum fe_type {
+ FE_QPSK, /&#x22C6; DVB-S &#x22C6;/
+ FE_QAM, /&#x22C6; DVB-C &#x22C6;/
+ FE_OFDM /&#x22C6; DVB-T &#x22C6;/
+ } fe_type_t;
+</programlisting>
+
+</section>
+
+<section id="frontend_caps">
+<title>frontend capabilities</title>
+
+<para>Capabilities describe what a frontend can do. Some capabilities can only be supported for
+a specific frontend type.</para>
+<programlisting>
+ typedef enum fe_caps {
+ FE_IS_STUPID = 0,
+ FE_CAN_INVERSION_AUTO = 0x1,
+ FE_CAN_FEC_1_2 = 0x2,
+ FE_CAN_FEC_2_3 = 0x4,
+ FE_CAN_FEC_3_4 = 0x8,
+ FE_CAN_FEC_4_5 = 0x10,
+ FE_CAN_FEC_5_6 = 0x20,
+ FE_CAN_FEC_6_7 = 0x40,
+ FE_CAN_FEC_7_8 = 0x80,
+ FE_CAN_FEC_8_9 = 0x100,
+ FE_CAN_FEC_AUTO = 0x200,
+ FE_CAN_QPSK = 0x400,
+ FE_CAN_QAM_16 = 0x800,
+ FE_CAN_QAM_32 = 0x1000,
+ FE_CAN_QAM_64 = 0x2000,
+ FE_CAN_QAM_128 = 0x4000,
+ FE_CAN_QAM_256 = 0x8000,
+ FE_CAN_QAM_AUTO = 0x10000,
+ FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000,
+ FE_CAN_BANDWIDTH_AUTO = 0x40000,
+ FE_CAN_GUARD_INTERVAL_AUTO = 0x80000,
+ FE_CAN_HIERARCHY_AUTO = 0x100000,
+ FE_CAN_MUTE_TS = 0x80000000,
+ FE_CAN_CLEAN_SETUP = 0x40000000
+ } fe_caps_t;
+</programlisting>
+</section>
+
+<section id="frontend_info">
+<title>frontend information</title>
+
+<para>Information about the frontend ca be queried with FE_GET_INFO.</para>
+
+<programlisting>
+ struct dvb_frontend_info {
+ char name[128];
+ fe_type_t type;
+ uint32_t frequency_min;
+ uint32_t frequency_max;
+ uint32_t frequency_stepsize;
+ uint32_t frequency_tolerance;
+ uint32_t symbol_rate_min;
+ uint32_t symbol_rate_max;
+ uint32_t symbol_rate_tolerance; /&#x22C6; ppm &#x22C6;/
+ uint32_t notifier_delay; /&#x22C6; ms &#x22C6;/
+ fe_caps_t caps;
+ };
+</programlisting>
+</section>
+
+<section id="frontend_diseqc">
+<title>diseqc master command</title>
+
+<para>A message sent from the frontend to DiSEqC capable equipment.</para>
+<programlisting>
+ struct dvb_diseqc_master_cmd {
+ uint8_t msg [6]; /&#x22C6; { framing, address, command, data[3] } &#x22C6;/
+ uint8_t msg_len; /&#x22C6; valid values are 3...6 &#x22C6;/
+ };
+</programlisting>
+</section>
+<section role="subsection">
+<title>diseqc slave reply</title>
+
+<para>A reply to the frontend from DiSEqC 2.0 capable equipment.</para>
+<programlisting>
+ struct dvb_diseqc_slave_reply {
+ uint8_t msg [4]; /&#x22C6; { framing, data [3] } &#x22C6;/
+ uint8_t msg_len; /&#x22C6; valid values are 0...4, 0 means no msg &#x22C6;/
+ int timeout; /&#x22C6; return from ioctl after timeout ms with &#x22C6;/
+ }; /&#x22C6; errorcode when no message was received &#x22C6;/
+</programlisting>
+</section>
+
+<section id="frontend_diseqc_slave_reply">
+<title>diseqc slave reply</title>
+<para>The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation
+(horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched
+consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
+<programlisting>
+ typedef enum fe_sec_voltage {
+ SEC_VOLTAGE_13,
+ SEC_VOLTAGE_18
+ } fe_sec_voltage_t;
+</programlisting>
+</section>
+
+<section id="frontend_sec_tone">
+<title>SEC continuous tone</title>
+
+<para>The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
+high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to
+be switched consistently to the DiSEqC commands as described in the DiSEqC
+spec.</para>
+<programlisting>
+ typedef enum fe_sec_tone_mode {
+ SEC_TONE_ON,
+ SEC_TONE_OFF
+ } fe_sec_tone_mode_t;
+</programlisting>
+</section>
+
+<section id="frontend_sec_burst">
+<title>SEC tone burst</title>
+
+<para>The 22KHz tone burst is usually used with non-DiSEqC capable switches to select
+between two connected LNBs/satellites. When using DiSEqC epuipment this voltage has to
+be switched consistently to the DiSEqC commands as described in the DiSEqC
+spec.</para>
+<programlisting>
+ typedef enum fe_sec_mini_cmd {
+ SEC_MINI_A,
+ SEC_MINI_B
+ } fe_sec_mini_cmd_t;
+</programlisting>
+
+<para></para>
+</section>
+
+<section id="frontend_status">
+<title>frontend status</title>
+<para>Several functions of the frontend device use the fe_status data type defined
+by</para>
+<programlisting>
+ typedef enum fe_status {
+ FE_HAS_SIGNAL = 0x01, /&#x22C6; found something above the noise level &#x22C6;/
+ FE_HAS_CARRIER = 0x02, /&#x22C6; found a DVB signal &#x22C6;/
+ FE_HAS_VITERBI = 0x04, /&#x22C6; FEC is stable &#x22C6;/
+ FE_HAS_SYNC = 0x08, /&#x22C6; found sync bytes &#x22C6;/
+ FE_HAS_LOCK = 0x10, /&#x22C6; everything's working... &#x22C6;/
+ FE_TIMEDOUT = 0x20, /&#x22C6; no lock within the last ~2 seconds &#x22C6;/
+ FE_REINIT = 0x40 /&#x22C6; frontend was reinitialized, &#x22C6;/
+ } fe_status_t; /&#x22C6; application is recommned to reset &#x22C6;/
+</programlisting>
+<para>to indicate the current state and/or state changes of the frontend hardware.
+</para>
+
+</section>
+
+<section id="frontend_params">
+<title>frontend parameters</title>
+<para>The kind of parameters passed to the frontend device for tuning depend on
+the kind of hardware you are using. All kinds of parameters are combined as an
+union in the FrontendParameters structure:</para>
+<programlisting>
+ struct dvb_frontend_parameters {
+ uint32_t frequency; /&#x22C6; (absolute) frequency in Hz for QAM/OFDM &#x22C6;/
+ /&#x22C6; intermediate frequency in kHz for QPSK &#x22C6;/
+ fe_spectral_inversion_t inversion;
+ union {
+ struct dvb_qpsk_parameters qpsk;
+ struct dvb_qam_parameters qam;
+ struct dvb_ofdm_parameters ofdm;
+ } u;
+ };
+</programlisting>
+<para>For satellite QPSK frontends you have to use the <constant>QPSKParameters</constant> member defined by</para>
+<programlisting>
+ struct dvb_qpsk_parameters {
+ uint32_t symbol_rate; /&#x22C6; symbol rate in Symbols per second &#x22C6;/
+ fe_code_rate_t fec_inner; /&#x22C6; forward error correction (see above) &#x22C6;/
+ };
+</programlisting>
+<para>for cable QAM frontend you use the <constant>QAMParameters</constant> structure</para>
+<programlisting>
+ struct dvb_qam_parameters {
+ uint32_t symbol_rate; /&#x22C6; symbol rate in Symbols per second &#x22C6;/
+ fe_code_rate_t fec_inner; /&#x22C6; forward error correction (see above) &#x22C6;/
+ fe_modulation_t modulation; /&#x22C6; modulation type (see above) &#x22C6;/
+ };
+</programlisting>
+<para>DVB-T frontends are supported by the <constant>OFDMParamters</constant> structure
+</para>
+<programlisting>
+ struct dvb_ofdm_parameters {
+ fe_bandwidth_t bandwidth;
+ fe_code_rate_t code_rate_HP; /&#x22C6; high priority stream code rate &#x22C6;/
+ fe_code_rate_t code_rate_LP; /&#x22C6; low priority stream code rate &#x22C6;/
+ fe_modulation_t constellation; /&#x22C6; modulation type (see above) &#x22C6;/
+ fe_transmit_mode_t transmission_mode;
+ fe_guard_interval_t guard_interval;
+ fe_hierarchy_t hierarchy_information;
+ };
+</programlisting>
+<para>In the case of QPSK frontends the <constant>Frequency</constant> field specifies the intermediate
+frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of
+the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and
+OFDM frontends the Frequency specifies the absolute frequency and is given in
+Hz.
+</para>
+<para>The Inversion field can take one of these values:
+</para>
+<programlisting>
+ typedef enum fe_spectral_inversion {
+ INVERSION_OFF,
+ INVERSION_ON,
+ INVERSION_AUTO
+ } fe_spectral_inversion_t;
+</programlisting>
+<para>It indicates if spectral inversion should be presumed or not. In the automatic setting
+(<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
+itself.
+</para>
+<para>The possible values for the <constant>FEC_inner</constant> field are
+</para>
+<programlisting>
+ typedef enum fe_code_rate {
+ FEC_NONE = 0,
+ FEC_1_2,
+ FEC_2_3,
+ FEC_3_4,
+ FEC_4_5,
+ FEC_5_6,
+ FEC_6_7,
+ FEC_7_8,
+ FEC_8_9,
+ FEC_AUTO
+ } fe_code_rate_t;
+</programlisting>
+<para>which correspond to error correction rates of 1/2, 2/3, etc., no error correction or auto
+detection.
+</para>
+<para>For cable and terrestrial frontends (QAM and OFDM) one also has to specify the quadrature
+modulation mode which can be one of the following:
+</para>
+<programlisting>
+ typedef enum fe_modulation {
+ QPSK,
+ QAM_16,
+ QAM_32,
+ QAM_64,
+ QAM_128,
+ QAM_256,
+ QAM_AUTO
+ } fe_modulation_t;
+</programlisting>
+<para>Finally, there are several more parameters for OFDM:
+</para>
+<programlisting>
+ typedef enum fe_transmit_mode {
+ TRANSMISSION_MODE_2K,
+ TRANSMISSION_MODE_8K,
+ TRANSMISSION_MODE_AUTO
+ } fe_transmit_mode_t;
+</programlisting>
+ <programlisting>
+ typedef enum fe_bandwidth {
+ BANDWIDTH_8_MHZ,
+ BANDWIDTH_7_MHZ,
+ BANDWIDTH_6_MHZ,
+ BANDWIDTH_AUTO
+ } fe_bandwidth_t;
+</programlisting>
+ <programlisting>
+ typedef enum fe_guard_interval {
+ GUARD_INTERVAL_1_32,
+ GUARD_INTERVAL_1_16,
+ GUARD_INTERVAL_1_8,
+ GUARD_INTERVAL_1_4,
+ GUARD_INTERVAL_AUTO
+ } fe_guard_interval_t;
+</programlisting>
+ <programlisting>
+ typedef enum fe_hierarchy {
+ HIERARCHY_NONE,
+ HIERARCHY_1,
+ HIERARCHY_2,
+ HIERARCHY_4,
+ HIERARCHY_AUTO
+ } fe_hierarchy_t;
+</programlisting>
+
+</section>
+
+<section id="frontend_events">
+<title>frontend events</title>
+ <programlisting>
+ struct dvb_frontend_event {
+ fe_status_t status;
+ struct dvb_frontend_parameters parameters;
+ };
+</programlisting>
+ </section>
+</section>
+
+
+<section id="frontend_fcalls">
+<title>Frontend Function Calls</title>
+
+<section id="frontend_f_open">
+<title>open()</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>This system call opens a named frontend device (/dev/dvb/adapter0/frontend0)
+ for subsequent use. Usually the first thing to do after a successful open is to
+ find out the frontend type with FE_GET_INFO.</para>
+<para>The device can be opened in read-only mode, which only allows monitoring of
+ device status and statistics, or read/write mode, which allows any kind of use
+ (e.g. performing tuning operations.)
+</para>
+<para>In a system with multiple front-ends, it is usually the case that multiple devices
+ cannot be open in read/write mode simultaneously. As long as a front-end
+ device is opened in read/write mode, other open() calls in read/write mode will
+ either fail or block, depending on whether non-blocking or blocking mode was
+ specified. A front-end device opened in blocking mode can later be put into
+ non-blocking mode (and vice versa) using the F_SETFL command of the fcntl
+ system call. This is a standard system call, documented in the Linux manual
+ page for fcntl. When an open() call has succeeded, the device will be ready
+ for use in the specified mode. This implies that the corresponding hardware is
+ powered up, and that other front-ends may have been powered down to make
+ that possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int open(const char &#x22C6;deviceName, int flags);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>const char
+ *deviceName</para>
+</entry><entry
+ align="char">
+<para>Name of specific video device.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int flags</para>
+</entry><entry
+ align="char">
+<para>A bit-wise OR of the following flags:</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDONLY read-only access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_RDWR read/write access</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>O_NONBLOCK open in non-blocking mode</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>(blocking mode is the default)</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_f_close">
+<title>close()</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This system call closes a previously opened front-end device. After closing
+ a front-end device, its corresponding hardware might be powered down
+ automatically.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int close(int fd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_read_status">
+<title>FE_READ_STATUS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns status information about the front-end. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_READ_STATUS,
+ fe_status_t &#x22C6;status);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_READ_STATUS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct fe_status_t
+ *status</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end status word is
+ to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>status points to invalid address.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_read_ber">
+<title>FE_READ_BER</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the bit error rate for the signal currently
+ received/demodulated by the front-end. For this command, read-only access to
+ the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_READ_BER,
+ uint32_t &#x22C6;ber);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_READ_BER for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>uint32_t *ber</para>
+</entry><entry
+ align="char">
+<para>The bit error rate is stored into *ber.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>ber points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSIGNAL</para>
+</entry><entry
+ align="char">
+<para>There is no signal, thus no meaningful bit error rate. Also
+ returned if the front-end is not turned on.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSYS</para>
+</entry><entry
+ align="char">
+<para>Function not available for this device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_read_snr">
+<title>FE_READ_SNR</title>
+
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the signal-to-noise ratio for the signal currently received
+ by the front-end. For this command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_READ_SNR, int16_t
+ &#x22C6;snr);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_READ_SNR for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int16_t *snr</para>
+</entry><entry
+ align="char">
+<para>The signal-to-noise ratio is stored into *snr.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>snr points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSIGNAL</para>
+</entry><entry
+ align="char">
+<para>There is no signal, thus no meaningful signal strength
+ value. Also returned if front-end is not turned on.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSYS</para>
+</entry><entry
+ align="char">
+<para>Function not available for this device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_read_signal_strength">
+<title>FE_READ_SIGNAL_STRENGTH</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the signal strength value for the signal currently received
+ by the front-end. For this command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ FE_READ_SIGNAL_STRENGTH, int16_t &#x22C6;strength);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_READ_SIGNAL_STRENGTH for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int16_t *strength</para>
+</entry><entry
+ align="char">
+<para>The signal strength value is stored into *strength.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>status points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSIGNAL</para>
+</entry><entry
+ align="char">
+<para>There is no signal, thus no meaningful signal strength
+ value. Also returned if front-end is not turned on.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSYS</para>
+</entry><entry
+ align="char">
+<para>Function not available for this device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_read_ub">
+<title>FE_READ_UNCORRECTED_BLOCKS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns the number of uncorrected blocks detected by the device
+ driver during its lifetime. For meaningful measurements, the increment in block
+ count during a specific time interval should be calculated. For this command,
+ read-only access to the device is sufficient.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>Note that the counter will wrap to zero after its maximum count has been
+ reached.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl( int fd, int request =
+ FE_READ_UNCORRECTED_BLOCKS, uint32_t &#x22C6;ublocks);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_READ_UNCORRECTED_BLOCKS for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>uint32_t *ublocks</para>
+</entry><entry
+ align="char">
+<para>The total number of uncorrected blocks seen by the driver
+ so far.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>ublocks points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ENOSYS</para>
+</entry><entry
+ align="char">
+<para>Function not available for this device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_set_fe">
+<title>FE_SET_FRONTEND</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call starts a tuning operation using specified parameters. The result
+ of this call will be successful if the parameters were valid and the tuning could
+ be initiated. The result of the tuning operation in itself, however, will arrive
+ asynchronously as an event (see documentation for FE_GET_EVENT and
+ FrontendEvent.) If a new FE_SET_FRONTEND operation is initiated before
+ the previous one was completed, the previous operation will be aborted in favor
+ of the new one. This command requires read/write access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_SET_FRONTEND,
+ struct dvb_frontend_parameters &#x22C6;p);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_SET_FRONTEND for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_parameters
+ *p</para>
+</entry><entry
+ align="char">
+<para>Points to parameters for tuning operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>p points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Maximum supported symbol rate reached.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_get_fe">
+<title>FE_GET_FRONTEND</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call queries the currently effective frontend parameters. For this
+ command, read-only access to the device is sufficient.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_GET_FRONTEND,
+ struct dvb_frontend_parameters &#x22C6;p);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_SET_FRONTEND for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_parameters
+ *p</para>
+</entry><entry
+ align="char">
+<para>Points to parameters for tuning operation.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>p points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Maximum supported symbol rate reached.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+</section>
+
+<section id="frontend_get_event">
+<title>FE_GET_EVENT</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns a frontend event if available. If an event is not
+ available, the behavior depends on whether the device is in blocking or
+ non-blocking mode. In the latter case, the call fails immediately with errno
+ set to EWOULDBLOCK. In the former case, the call blocks until an event
+ becomes available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>The standard Linux poll() and/or select() system calls can be used with the
+ device file descriptor to watch for new events. For select(), the file descriptor
+ should be included in the exceptfds argument, and for poll(), POLLPRI should
+ be specified as the wake-up condition. Since the event queue allocated is
+ rather small (room for 8 events), the queue must be serviced regularly to avoid
+ overflow. If an overflow happens, the oldest event is discarded from the queue,
+ and an error (EOVERFLOW) occurs the next time the queue is read. After
+ reporting the error condition in this fashion, subsequent FE_GET_EVENT
+ calls will return events from the queue as usual.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>For the sake of implementation simplicity, this command requires read/write
+ access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = QPSK_GET_EVENT,
+ struct dvb_frontend_event &#x22C6;ev);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_GET_EVENT for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_event
+ *ev</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the event,</para>
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>if any, is to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>ev points to invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EWOULDBLOCK</para>
+</entry><entry
+ align="char">
+<para>There is no event pending, and the device is in
+ non-blocking mode.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EOVERFLOW</para>
+</entry><entry
+ align="char">
+</entry>
+ </row><row><entry
+ align="char">
+</entry><entry
+ align="char">
+<para>Overflow in event queue - one or more events were lost.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_get_info">
+<title>FE_GET_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns information about the front-end. This call only requires
+ read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para> int ioctl(int fd, int request = FE_GET_INFO, struct
+ dvb_frontend_info &#x22C6;info);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_GET_INFO for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_frontend_info
+ *info</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end information is
+ to be stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid open file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>info points to invalid address.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_diseqc_reset_overload">
+<title>FE_DISEQC_RESET_OVERLOAD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>If the bus has been automatically powered off due to power overload, this ioctl
+ call restores the power to the bus. The call requires read/write access to the
+ device. This call has no effect if the device is manually powered off. Not all
+ DVB adapters support this ioctl.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ FE_DISEQC_RESET_OVERLOAD);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_DISEQC_RESET_OVERLOAD for this
+ command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Permission denied (needs read/write access).</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_diseqc_send_master_cmd">
+<title>FE_DISEQC_SEND_MASTER_CMD</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to send a a DiSEqC command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ FE_DISEQC_SEND_MASTER_CMD, struct
+ dvb_diseqc_master_cmd &#x22C6;cmd);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_DISEQC_SEND_MASTER_CMD for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_diseqc_master_cmd
+ *cmd</para>
+</entry><entry
+ align="char">
+<para>Pointer to the command to be transmitted.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>Seq points to an invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>The data structure referred to by seq is invalid in some
+ way.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Permission denied (needs read/write access).</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_diseqc_recv_slave_reply">
+<title>FE_DISEQC_RECV_SLAVE_REPLY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to receive reply to a DiSEqC 2.0 command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ FE_DISEQC_RECV_SLAVE_REPLY, struct
+ dvb_diseqc_slave_reply &#x22C6;reply);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_DISEQC_RECV_SLAVE_REPLY for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct
+ dvb_diseqc_slave_reply
+ *reply</para>
+</entry><entry
+ align="char">
+<para>Pointer to the command to be received.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>Seq points to an invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>The data structure referred to by seq is invalid in some
+ way.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Permission denied (needs read/write access).</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_diseqc_send_burst">
+<title>FE_DISEQC_SEND_BURST</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call is used to send a 22KHz tone burst.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ FE_DISEQC_SEND_BURST, fe_sec_mini_cmd_t burst);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_DISEQC_SEND_BURST for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_mini_cmd_t
+ burst</para>
+</entry><entry
+ align="char">
+<para>burst A or B.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>EBADF</para>
+</entry><entry
+ align="char">
+<para>fd is not a valid file descriptor.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EFAULT</para>
+</entry><entry
+ align="char">
+<para>Seq points to an invalid address.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>The data structure referred to by seq is invalid in some
+ way.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>Permission denied (needs read/write access).</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_set_tone">
+<title>FE_SET_TONE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This call is used to set the generation of the continuous 22kHz tone. This call
+ requires read/write permissions.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_SET_TONE,
+ fe_sec_tone_mode_t tone);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_SET_TONE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_tone_mode_t
+ tone</para>
+</entry><entry
+ align="char">
+<para>The requested tone generation mode (on/off).</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>File not opened with read permissions.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+<section id="fe_set_voltage">
+<title>FE_SET_VOLTAGE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This call is used to set the bus voltage. This call requires read/write
+ permissions.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = FE_SET_VOLTAGE,
+ fe_sec_voltage_t voltage);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_SET_VOLTAGE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>fe_sec_voltage_t
+ voltage</para>
+</entry><entry
+ align="char">
+<para>The requested bus voltage.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>File not opened with read permissions.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="frontend_enable_high_lnb_volt">
+<title>FE_ENABLE_HIGH_LNB_VOLTAGE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>If high != 0 enables slightly higher voltages instead of 13/18V (to compensate
+ for long cables). This call requires read/write permissions. Not all DVB
+ adapters support this ioctl.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ FE_ENABLE_HIGH_LNB_VOLTAGE, int high);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals FE_SET_VOLTAGE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int high</para>
+</entry><entry
+ align="char">
+<para>The requested bus voltage.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>ENODEV</para>
+</entry><entry
+ align="char">
+<para>Device driver not loaded/available.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EBUSY</para>
+</entry><entry
+ align="char">
+<para>Device or resource busy.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINVAL</para>
+</entry><entry
+ align="char">
+<para>Invalid argument.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EPERM</para>
+</entry><entry
+ align="char">
+<para>File not opened with read permissions.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>EINTERNAL</para>
+</entry><entry
+ align="char">
+<para>Internal error in the device driver.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+</section>