5 files changed, 21 insertions, 6 deletions
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 683ccae00ad..c014eccaf19 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -194,7 +194,7 @@ The following information is available in this file:
           - Packetized SCSI Protocol at 160MB/s and 320MB/s
           - Quick Arbitration Selection (QAS)
           - Retained Training Information (Rev B. ASIC only)
-        - Interrupt Coalessing
+        - Interrupt Coalescing
         - Initiator Mode (target mode not currently 
           supported)
         - Support for the PCI-X standard up to 133MHz
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 230e30846ef..08e2b4d04aa 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -206,7 +206,7 @@ of MOVE MEMORY instructions.
 The 896 and the 895A allows handling of the phase mismatch context from 
 SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
 until the C code has saved the context of the transfer).
-Implementing this without using LOAD/STORE instructions would be painfull 
+Implementing this without using LOAD/STORE instructions would be painful 
 and I didn't even want to try it.
 
 The 896 chip supports 64 bit PCI transactions and addressing, while the 
@@ -240,7 +240,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown SCSI devices do not properly support tagged command queuing.
+Some known SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that the hard disks I use on my machines behave well with 
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
index e5b071d4661..d7f181701dc 100644
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ b/Documentation/scsi/scsi_fc_transport.txt
@@ -1,10 +1,11 @@
                              SCSI FC Tansport
                  =============================================
 
-Date:  4/12/2007
+Date:  11/18/2008
 Kernel Revisions for features:
   rports : <<TBS>>
-  vports : 2.6.22 (? TBD)
+  vports : 2.6.22
+  bsg support : 2.6.30 (?TBD?)
 
 
 Introduction
@@ -15,6 +16,7 @@ The FC transport can be found at:
   drivers/scsi/scsi_transport_fc.c
   include/scsi/scsi_transport_fc.h
   include/scsi/scsi_netlink_fc.h
+  include/scsi/scsi_bsg_fc.h
 
 This file is found at Documentation/scsi/scsi_fc_transport.txt
 
@@ -472,6 +474,14 @@ int
 fc_vport_terminate(struct fc_vport *vport)
 
 
+FC BSG support (CT & ELS passthru, and more)
+========================================================================
+<< To Be Supplied >>
+
+
+
+
+
 Credits
 =======
 The following people have contributed to this document:
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index a6d5354639b..de67229251d 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -1271,6 +1271,11 @@ of interest:
     hostdata[0]  - area reserved for LLD at end of struct Scsi_Host. Size
                    is set by the second argument (named 'xtr_bytes') to
                    scsi_host_alloc() or scsi_register().
+    vendor_id    - a unique value that identifies the vendor supplying
+                   the LLD for the Scsi_Host.  Used most often in validating
+                   vendor-specific message requests.  Value consists of an
+                   identifier type and a vendor-specific value.
+                   See scsi_netlink.h for a description of valid formats.
 
 The scsi_host structure is defined in include/scsi/scsi_host.h
 
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 49ea5c58c6b..eb9a7b905b6 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -206,7 +206,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown old SCSI devices do not properly support tagged command queuing.
+Some known old SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that I never have had problem with tagged queuing using