aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/lguest/extract58
-rw-r--r--Documentation/lguest/lguest.c620
2 files changed, 632 insertions, 46 deletions
diff --git a/Documentation/lguest/extract b/Documentation/lguest/extract
new file mode 100644
index 00000000000..7730bb6e4b9
--- /dev/null
+++ b/Documentation/lguest/extract
@@ -0,0 +1,58 @@
+#! /bin/sh
+
+set -e
+
+PREFIX=$1
+shift
+
+trap 'rm -r $TMPDIR' 0
+TMPDIR=`mktemp -d`
+
+exec 3>/dev/null
+for f; do
+ while IFS="
+" read -r LINE; do
+ case "$LINE" in
+ *$PREFIX:[0-9]*:\**)
+ NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
+ if [ -f $TMPDIR/$NUM ]; then
+ echo "$TMPDIR/$NUM already exits prior to $f"
+ exit 1
+ fi
+ exec 3>>$TMPDIR/$NUM
+ echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
+ /bin/echo "$LINE" | sed -e "s/$PREFIX:[0-9]*//" -e "s/:\*/*/" >&3
+ ;;
+ *$PREFIX:[0-9]*)
+ NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
+ if [ -f $TMPDIR/$NUM ]; then
+ echo "$TMPDIR/$NUM already exits prior to $f"
+ exit 1
+ fi
+ exec 3>>$TMPDIR/$NUM
+ echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
+ /bin/echo "$LINE" | sed "s/$PREFIX:[0-9]*//" >&3
+ ;;
+ *:\**)
+ /bin/echo "$LINE" | sed -e "s/:\*/*/" -e "s,/\*\*/,," >&3
+ echo >&3
+ exec 3>/dev/null
+ ;;
+ *)
+ /bin/echo "$LINE" >&3
+ ;;
+ esac
+ done < $f
+ echo >&3
+ exec 3>/dev/null
+done
+
+LASTFILE=""
+for f in $TMPDIR/*; do
+ if [ "$LASTFILE" != $(cat $TMPDIR/.$(basename $f) ) ]; then
+ LASTFILE=$(cat $TMPDIR/.$(basename $f) )
+ echo "[ $LASTFILE ]"
+ fi
+ cat $f
+done
+
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 62a8133393e..f7918401a00 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,5 +1,10 @@
-/* Simple program to layout "physical" memory for new lguest guest.
- * Linked high to avoid likely physical memory. */
+/*P:100 This is the Launcher code, a simple program which lays out the
+ * "physical" memory for the new Guest by mapping the kernel image and the
+ * virtual devices, then reads repeatedly from /dev/lguest to run the Guest.
+ *
+ * The only trick: the Makefile links it at a high address so it will be clear
+ * of the guest memory region. It means that each Guest cannot have more than
+ * about 2.5G of memory on a normally configured Host. :*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
@@ -29,12 +34,20 @@
#include <termios.h>
#include <getopt.h>
#include <zlib.h>
+/*L:110 We can ignore the 28 include files we need for this program, but I do
+ * want to draw attention to the use of kernel-style types.
+ *
+ * As Linus said, "C is a Spartan language, and so should your naming be." I
+ * like these abbreviations and the header we need uses them, so we define them
+ * here.
+ */
typedef unsigned long long u64;
typedef uint32_t u32;
typedef uint16_t u16;
typedef uint8_t u8;
#include "../../include/linux/lguest_launcher.h"
#include "../../include/asm-i386/e820.h"
+/*:*/
#define PAGE_PRESENT 0x7 /* Present, RW, Execute */
#define NET_PEERNUM 1
@@ -43,33 +56,52 @@ typedef uint8_t u8;
#define SIOCBRADDIF 0x89a2 /* add interface to bridge */
#endif
+/*L:120 verbose is both a global flag and a macro. The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here. */
static bool verbose;
#define verbose(args...) \
do { if (verbose) printf(args); } while(0)
+/*:*/
+
+/* The pipe to send commands to the waker process */
static int waker_fd;
+/* The top of guest physical memory. */
static u32 top;
+/* This is our list of devices. */
struct device_list
{
+ /* Summary information about the devices in our list: ready to pass to
+ * select() to ask which need servicing.*/
fd_set infds;
int max_infd;
+ /* The descriptor page for the devices. */
struct lguest_device_desc *descs;
+
+ /* A single linked list of devices. */
struct device *dev;
+ /* ... And an end pointer so we can easily append new devices */
struct device **lastdev;
};
+/* The device structure describes a single device. */
struct device
{
+ /* The linked-list pointer. */
struct device *next;
+ /* The descriptor for this device, as mapped into the Guest. */
struct lguest_device_desc *desc;
+ /* The memory page(s) of this device, if any. Also mapped in Guest. */
void *mem;
- /* Watch this fd if handle_input non-NULL. */
+ /* If handle_input is set, it wants to be called when this file
+ * descriptor is ready. */
int fd;
bool (*handle_input)(int fd, struct device *me);
- /* Watch DMA to this key if handle_input non-NULL. */
+ /* If handle_output is set, it wants to be called when the Guest sends
+ * DMA to this key. */
unsigned long watch_key;
u32 (*handle_output)(int fd, const struct iovec *iov,
unsigned int num, struct device *me);
@@ -78,6 +110,11 @@ struct device
void *priv;
};
+/*L:130
+ * Loading the Kernel.
+ *
+ * We start with couple of simple helper routines. open_or_die() avoids
+ * error-checking code cluttering the callers: */
static int open_or_die(const char *name, int flags)
{
int fd = open(name, flags);
@@ -86,26 +123,38 @@ static int open_or_die(const char *name, int flags)
return fd;
}
+/* map_zeroed_pages() takes a (page-aligned) address and a number of pages. */
static void *map_zeroed_pages(unsigned long addr, unsigned int num)
{
+ /* We cache the /dev/zero file-descriptor so we only open it once. */
static int fd = -1;
if (fd == -1)
fd = open_or_die("/dev/zero", O_RDONLY);
+ /* We use a private mapping (ie. if we write to the page, it will be
+ * copied), and obviously we insist that it be mapped where we ask. */
if (mmap((void *)addr, getpagesize() * num,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_FIXED|MAP_PRIVATE, fd, 0)
!= (void *)addr)
err(1, "Mmaping %u pages of /dev/zero @%p", num, (void *)addr);
+
+ /* Returning the address is just a courtesy: can simplify callers. */
return (void *)addr;
}
-/* Find magic string marking entry point, return entry point. */
+/* To find out where to start we look for the magic Guest string, which marks
+ * the code we see in lguest_asm.S. This is a hack which we are currently
+ * plotting to replace with the normal Linux entry point. */
static unsigned long entry_point(void *start, void *end,
unsigned long page_offset)
{
void *p;
+ /* The scan gives us the physical starting address. We want the
+ * virtual address in this case, and fortunately, we already figured
+ * out the physical-virtual difference and passed it here in
+ * "page_offset". */
for (p = start; p < end; p++)
if (memcmp(p, "GenuineLguest", strlen("GenuineLguest")) == 0)
return (long)p + strlen("GenuineLguest") + page_offset;
@@ -113,7 +162,17 @@ static unsigned long entry_point(void *start, void *end,
err(1, "Is this image a genuine lguest?");
}
-/* Returns the entry point */
+/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+ * the Guest memory. ELF = Embedded Linking Format, which is the format used
+ * by all modern binaries on Linux including the kernel.
+ *
+ * The ELF headers give *two* addresses: a physical address, and a virtual
+ * address. The Guest kernel expects to be placed in memory at the physical
+ * address, and the page tables set up so it will correspond to that virtual
+ * address. We return the difference between the virtual and physical
+ * addresses in the "page_offset" pointer.
+ *
+ * We return the starting address. */
static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr,
unsigned long *page_offset)
{
@@ -122,40 +181,61 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr,
unsigned int i;
unsigned long start = -1UL, end = 0;
- /* Sanity checks. */
+ /* Sanity checks on the main ELF header: an x86 executable with a
+ * reasonable number of correctly-sized program headers. */
if (ehdr->e_type != ET_EXEC
|| ehdr->e_machine != EM_386
|| ehdr->e_phentsize != sizeof(Elf32_Phdr)
|| ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
errx(1, "Malformed elf header");
+ /* An ELF executable contains an ELF header and a number of "program"
+ * headers which indicate which parts ("segments") of the program to
+ * load where. */
+
+ /* We read in all the program headers at once: */
if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
err(1, "Seeking to program headers");
if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
err(1, "Reading program headers");
+ /* We don't know page_offset yet. */
*page_offset = 0;
- /* We map the loadable segments at virtual addresses corresponding
- * to their physical addresses (our virtual == guest physical). */
+
+ /* Try all the headers: there are usually only three. A read-only one,
+ * a read-write one, and a "note" section which isn't loadable. */
for (i = 0; i < ehdr->e_phnum; i++) {
+ /* If this isn't a loadable segment, we ignore it */
if (phdr[i].p_type != PT_LOAD)
continue;
verbose("Section %i: size %i addr %p\n",
i, phdr[i].p_memsz, (void *)phdr[i].p_paddr);
- /* We expect linear address space. */
+ /* We expect a simple linear address space: every segment must
+ * have the same difference between virtual (p_vaddr) and
+ * physical (p_paddr) address. */
if (!*page_offset)
*page_offset = phdr[i].p_vaddr - phdr[i].p_paddr;
else if (*page_offset != phdr[i].p_vaddr - phdr[i].p_paddr)
errx(1, "Page offset of section %i different", i);
+ /* We track the first and last address we mapped, so we can
+ * tell entry_point() where to scan. */
if (phdr[i].p_paddr < start)
start = phdr[i].p_paddr;
if (phdr[i].p_paddr + phdr[i].p_filesz > end)
end = phdr[i].p_paddr + phdr[i].p_filesz;
- /* We map everything private, writable. */
+ /* We map this section of the file at its physical address. We
+ * map it read & write even if the header says this segment is
+ * read-only. The kernel really wants to be writable: it
+ * patches its own instructions which would normally be
+ * read-only.
+ *
+ * MAP_PRIVATE means that the page won't be copied until a
+ * write is done to it. This allows us to share much of the
+ * kernel memory between Guests. */
addr = mmap((void *)phdr[i].p_paddr,
phdr[i].p_filesz,
PROT_READ|PROT_WRITE|PROT_EXEC,
@@ -169,7 +249,31 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr,
return entry_point((void *)start, (void *)end, *page_offset);
}
-/* This is amazingly reliable. */
+/*L:170 Prepare to be SHOCKED and AMAZED. And possibly a trifle nauseated.
+ *
+ * We know that CONFIG_PAGE_OFFSET sets what virtual address the kernel expects
+ * to be. We don't know what that option was, but we can figure it out
+ * approximately by looking at the addresses in the code. I chose the common
+ * case of reading a memory location into the %eax register:
+ *
+ * movl <some-address>, %eax
+ *
+ * This gets encoded as five bytes: "0xA1 <4-byte-address>". For example,
+ * "0xA1 0x18 0x60 0x47 0xC0" reads the address 0xC0476018 into %eax.
+ *
+ * In this example can guess that the kernel was compiled with
+ * CONFIG_PAGE_OFFSET set to 0xC0000000 (it's always a round number). If the
+ * kernel were larger than 16MB, we might see 0xC1 addresses show up, but our
+ * kernel isn't that bloated yet.
+ *
+ * Unfortunately, x86 has variable-length instructions, so finding this
+ * particular instruction properly involves writing a disassembler. Instead,
+ * we rely on statistics. We look for "0xA1" and tally the different bytes
+ * which occur 4 bytes later (the "0xC0" in our example above). When one of
+ * those bytes appears three times, we can be reasonably confident that it
+ * forms the start of CONFIG_PAGE_OFFSET.
+ *
+ * This is amazingly reliable. */
static unsigned long intuit_page_offset(unsigned char *img, unsigned long len)
{
unsigned int i, possibilities[256] = { 0 };
@@ -182,30 +286,52 @@ static unsigned long intuit_page_offset(unsigned char *img, unsigned long len)
errx(1, "could not determine page offset");
}
+/*L:160 Unfortunately the entire ELF image isn't compressed: the segments
+ * which need loading are extracted and compressed raw. This denies us the
+ * information we need to make a fully-general loader. */
static unsigned long unpack_bzimage(int fd, unsigned long *page_offset)
{
gzFile f;
int ret, len = 0;
+ /* A bzImage always gets loaded at physical address 1M. This is
+ * actually configurable as CONFIG_PHYSICAL_START, but as the comment
+ * there says, "Don't change this unless you know what you are doing".
+ * Indeed. */
void *img = (void *)0x100000;
+ /* gzdopen takes our file descriptor (carefully placed at the start of
+ * the GZIP header we found) and returns a gzFile. */
f = gzdopen(fd, "rb");
+ /* We read it into memory in 64k chunks until we hit the end. */
while ((ret = gzread(f, img + len, 65536)) > 0)
len += ret;
if (ret < 0)
err(1, "reading image from bzImage");
verbose("Unpacked size %i addr %p\n", len, img);
+
+ /* Without the ELF header, we can't tell virtual-physical gap. This is
+ * CONFIG_PAGE_OFFSET, and people do actually change it. Fortunately,
+ * I have a clever way of figuring it out from the code itself. */
*page_offset = intuit_page_offset(img, len);
return entry_point(img, img + len, *page_offset);
}
+/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded. You're
+ * supposed to jump into it and it will unpack itself. We can't do that
+ * because the Guest can't run the unpacking code, and adding features to
+ * lguest kills puppies, so we don't want to.
+ *
+ * The bzImage is formed by putting the decompressing code in front of the
+ * compressed kernel code. So we can simple scan through it looking for the
+ * first "gzip" header, and start decompressing from there. */
static unsigned long load_bzimage(int fd, unsigned long *page_offset)
{
unsigned char c;
int state = 0;
- /* Ugly brute force search for gzip header. */
+ /* GZIP header is 0x1F 0x8B <method> <flags>... <compressed-by>. */
while (read(fd, &c, 1) == 1) {
switch (state) {
case 0:
@@ -222,8 +348,10 @@ static unsigned long load_bzimage(int fd, unsigned long *page_offset)
state++;
break;
case 9:
+ /* Seek back to the start of the gzip header. */
lseek(fd, -10, SEEK_CUR);
- if (c != 0x03) /* Compressed under UNIX. */
+ /* One final check: "compressed under UNIX". */
+ if (c != 0x03)
state = -1;
else
return unpack_bzimage(fd, page_offset);
@@ -232,25 +360,43 @@ static unsigned long load_bzimage(int fd, unsigned long *page_offset)
errx(1, "Could not find kernel in bzImage");
}
+/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+ * come wrapped up in the self-decompressing "bzImage" format. With some funky
+ * coding, we can load those, too. */
static unsigned long load_kernel(int fd, unsigned long *page_offset)
{
Elf32_Ehdr hdr;
+ /* Read in the first few bytes. */
if (read(fd, &hdr, sizeof(hdr)) != sizeof(hdr))
err(1, "Reading kernel");
+ /* If it's an ELF file, it starts with "\177ELF" */
if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
return map_elf(fd, &hdr, page_offset);
+ /* Otherwise we assume it's a bzImage, and try to unpack it */
return load_bzimage(fd, page_offset);
}
+/* This is a trivial little helper to align pages. Andi Kleen hated it because
+ * it calls getpagesize() twice: "it's dumb code."
+ *
+ * Kernel guys get really het up about optimization, even when it's not
+ * necessary. I leave this code as a reaction against that. */
static inline unsigned long page_align(unsigned long addr)
{
+ /* Add upwards and truncate downwards. */
return ((addr + getpagesize()-1) & ~(getpagesize()-1));
}
-/* initrd gets loaded at top of memory: return length. */
+/*L:180 An "initial ram disk" is a disk image loaded into memory along with
+ * the kernel which the kernel can use to boot from without needing any
+ * drivers. Most distributions now use this as standard: the initrd contains
+ * the code to load the appropriate driver modules for the current machine.
+ *
+ * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
+ * kernels. He sent me this (and tells me when I break it). */
static unsigned long load_initrd(const char *name, unsigned long mem)
{
int ifd;
@@ -259,21 +405,35 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
void *iaddr;
ifd = open_or_die(name, O_RDONLY);
+ /* fstat() is needed to get the file size. */
if (fstat(ifd, &st) < 0)
err(1, "fstat() on initrd '%s'", name);
+ /* The length needs to be rounded up to a page size: mmap needs the
+ * address to be page aligned. */
len = page_align(st.st_size);
+ /* We map the initrd at the top of memory. */
iaddr = mmap((void *)mem - len, st.st_size,
PROT_READ|PROT_EXEC|PROT_WRITE,
MAP_FIXED|MAP_PRIVATE, ifd, 0);
if (iaddr != (void *)mem - len)
err(1, "Mmaping initrd '%s' returned %p not %p",
name, iaddr, (void *)mem - len);
+ /* Once a file is mapped, you can close the file descriptor. It's a
+ * little odd, but quite useful. */
close(ifd);
verbose("mapped initrd %s size=%lu @ %p\n", name, st.st_size, iaddr);
+
+ /* We return the initrd size. */
return len;
}
+/* Once we know how much memory we have, and the address the Guest kernel
+ * expects, we can construct simple linear page tables which will get the Guest
+ * far enough into the boot to create its own.
+ *
+ * We lay them out of the way, just below the initrd (which is why we need to
+ * know its size). */
static unsigned long setup_pagetables(unsigned long mem,
unsigned long initrd_size,
unsigned long page_offset)
@@ -282,23 +442,32 @@ static unsigned long setup_pagetables(unsigned long mem,
unsigned int mapped_pages, i, linear_pages;
unsigned int ptes_per_page = getpagesize()/sizeof(u32);
- /* If we can map all of memory above page_offset, we do so. */
+ /* Ideally we map all physical memory starting at page_offset.
+ * However, if page_offset is 0xC0000000 we can only map 1G of physical
+ * (0xC0000000 + 1G overflows). */
if (mem <= -page_offset)
mapped_pages = mem/getpagesize();
else
mapped_pages = -page_offset/getpagesize();
- /* Each linear PTE page can map ptes_per_page pages. */
+ /* Each PTE page can map ptes_per_page pages: how many do we need? */
linear_pages = (mapped_pages + ptes_per_page-1)/ptes_per_page;
- /* We lay out top-level then linear mapping immediately below initrd */
+ /* We put the toplevel page directory page at the top of memory. */
pgdir = (void *)mem - initrd_size - getpagesize();
+
+ /* Now we use the next linear_pages pages as pte pages */
linear = (void *)pgdir - linear_pages*getpagesize();
+ /* Linear mapping is easy: put every page's address into the mapping in
+ * order. PAGE_PRESENT contains the flags Present, Writable and
+ * Executable. */
for (i = 0; i < mapped_pages; i++)
linear[i] = ((i * getpagesize()) | PAGE_PRESENT);
- /* Now set up pgd so that this memory is at page_offset */
+ /* The top level points to the linear page table pages above. The
+ * entry representing page_offset points to the first one, and they
+ * continue from there. */
for (i = 0; i < mapped_pages; i += ptes_per_page) {
pgdir[(i + page_offset/getpagesize())/ptes_per_page]
= (((u32)linear + i*sizeof(u32)) | PAGE_PRESENT);
@@ -307,9 +476,13 @@ static unsigned long setup_pagetables(unsigned long mem,
verbose("Linear mapping of %u pages in %u pte pages at %p\n",
mapped_pages, linear_pages, linear);
+ /* We return the top level (guest-physical) address: the kernel needs
+ * to know where it is. */
return (unsigned long)pgdir;
}
+/* Simple routine to roll all the commandline arguments together with spaces
+ * between them. */
static void concat(char *dst, char *args[])
{
unsigned int i, len = 0;
@@ -323,6 +496,10 @@ static void concat(char *dst, char *args[])
dst[len] = '\0';
}
+/* This is where we actually tell the kernel to initialize the Guest. We saw
+ * the arguments it expects when we looked at initialize() in lguest_user.c:
+ * the top physical page to allow, the top level pagetable, the entry point and
+ * the page_offset constant for the Guest. */
static int tell_kernel(u32 pgdir, u32 start, u32 page_offset)
{
u32 args[] = { LHREQ_INITIALIZE,
@@ -332,8 +509,11 @@ static int tell_kernel(u32 pgdir, u32 start, u32 page_offset)
fd = open_or_die("/dev/lguest", O_RDWR);
if (write(fd, args, sizeof(args)) < 0)
err(1, "Writing to /dev/lguest");
+
+ /* We return the /dev/lguest file descriptor to control this Guest */
return fd;
}
+/*:*/
static void set_fd(int fd, struct device_list *devices)
{
@@ -342,61 +522,108 @@ static void set_fd(int fd, struct device_list *devices)
devices->max_infd = fd;
}
-/* When input arrives, we tell the kernel to kick lguest out with -EAGAIN. */
+/*L:200
+ * The Waker.
+ *
+ * With a console and network devices, we can have lots of input which we need
+ * to process. We could try to tell the kernel what file descriptors to watch,
+ * but handing a file descriptor mask through to the kernel is fairly icky.
+ *
+ * Instead, we fork off a process which watches the file descriptors and writes
+ * the LHREQ_BREAK command to the /dev/lguest filedescriptor to tell the Host
+ * loop to stop running the Guest. This causes it to return from the
+ * /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
+ * the LHREQ_BREAK and wake us up again.
+ *
+ * This, of course, is merely a different *kind* of icky.
+ */
static void wake_parent(int pipefd, int lguest_fd, struct device_list *devices)
{
+ /* Add the pipe from the Launcher to the fdset in the device_list, so
+ * we watch it, too. */
set_fd(pipefd, devices);
for (;;) {
fd_set rfds = devices->infds;
u32 args[] = { LHREQ_BREAK, 1 };
+ /* Wait until input is ready from one of the devices. */
select(devices->max_infd+1, &rfds, NULL, NULL, NULL);
+ /* Is it a message from the Launcher? */
if (FD_ISSET(pipefd, &rfds)) {
int ignorefd;
+ /* If read() returns 0, it means the Launcher has
+ * exited. We silently follow. */
if (read(pipefd, &ignorefd, sizeof(ignorefd)) == 0)
exit(0);
+ /* Otherwise it's telling us there's a problem with one
+ * of the devices, and we should ignore that file
+ * descriptor from now on. */
FD_CLR(ignorefd, &devices->infds);
- } else
+ } else /* Send LHREQ_BREAK command. */
write(lguest_fd, args, sizeof(args));
}
}
+/* This routine just sets up a pipe to the Waker process. */
static int setup_waker(int lguest_fd, struct device_list *device_list)
{
int pipefd[2], child;
+ /* We create a pipe to talk to the waker, and also so it knows when the
+ * Launcher dies (and closes pipe). */
pipe(pipefd);
child = fork();
if (child == -1)
err(1, "forking");
if (child == 0) {
+ /* Close the "writing" end of our copy of the pipe */
close(pipefd[1]);
wake_parent(pipefd[0], lguest_fd, device_list);
}
+ /* Close the reading end of our copy of the pipe. */
close(pipefd[0]);
+ /* Here is the fd used to talk to the waker. */
return pipefd[1];
}
+/*L:210
+ * Device Handling.
+ *
+ * When the Guest sends DMA to us, it sends us an array of addresses and sizes.
+ * We need to make sure it's not trying to reach into the Launcher itself, so
+ * we have a convenient routine which check it and exits with an error message
+ * if something funny is going on:
+ */
static void *_check_pointer(unsigned long addr, unsigned int size,
unsigned int line)
{
+ /* We have to separately check addr and addr+size, because size could
+ * be huge and addr + size might wrap around. */
if (addr >= top || addr + size >= top)
errx(1, "%s:%i: Invalid address %li", __FILE__, line, addr);
+ /* We return a pointer for the caller's convenience, now we know it's
+ * safe to use. */
return (void *)addr;
}
+/* A macro which transparently hands the line number to the real function. */
#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
-/* Returns pointer to dma->used_len */
+/* The Guest has given us the address of a "struct lguest_dma". We check it's
+ * OK and convert it to an iovec (which is a simple array of ptr/size
+ * pairs). */
static u32 *dma2iov(unsigned long dma, struct iovec iov[], unsigned *num)
{
unsigned int i;
struct lguest_dma *udma;
+ /* First we make sure that the array memory itself is valid. */
udma = check_pointer(dma, sizeof(*udma));
+ /* Now we check each element */
for (i = 0; i < LGUEST_MAX_DMA_SECTIONS; i++) {
+ /* A zero length ends the array. */
if (!udma->len[i])
break;
@@ -404,9 +631,15 @@ static u32 *dma2iov(unsigned long dma, struct iovec iov[], unsigned *num)
iov[i].iov_len = udma->len[i];
}
*num = i;
+
+ /* We return the pointer to where the caller should write the amount of
+ * the buffer used. */
return &udma->used_len;
}
+/* This routine gets a DMA buffer from the Guest for a given key, and converts
+ * it to an iovec array. It returns the interrupt the Guest wants when we're
+ * finished, and a pointer to the "used_len" field to fill in. */
static u32 *get_dma_buffer(int fd, void *key,
struct iovec iov[], unsigned int *num, u32 *irq)
{
@@ -414,16 +647,21 @@ static u32 *get_dma_buffer(int fd, void *key,
unsigned long udma;
u32 *res;
+ /* Ask the kernel for a DMA buffer corresponding to this key. */
udma = write(fd, buf, sizeof(buf));
+ /* They haven't registered any, or they're all used? */
if (udma == (unsigned long)-1)
return NULL;
- /* Kernel stashes irq in ->used_len. */
+ /* Convert it into our iovec array */
res = dma2iov(udma, iov, num);
+ /* The kernel stashes irq in ->used_len to get it out to us. */
*irq = *res;
+ /* Return a pointer to ((struct lguest_dma *)udma)->used_len. */
return res;
}
+/* This is a convenient routine to send the Guest an interrupt. */
static void trigger_irq(int fd, u32 irq)
{
u32 buf[] = { LHREQ_IRQ, irq };
@@ -431,6 +669,10 @@ static void trigger_irq(int fd, u32 irq)
err(1, "Triggering irq %i", irq);
}
+/* This simply sets up an iovec array where we can put data to be discarded.
+ * This happens when the Guest doesn't want or can't handle the input: we have
+ * to get rid of it somewhere, and if we bury it in the ceiling space it will
+ * start to smell after a week. */
static void discard_iovec(struct iovec *iov, unsigned int *num)
{
static char discard_buf[1024];
@@ -439,19 +681,24 @@ static void discard_iovec(struct iovec *iov, unsigned int *num)
iov->iov_len = sizeof(discard_buf);
}
+/* Here is the input terminal setting we save, and the routine to restore them
+ * on exit so the user can see what they type next. */
static struct termios orig_term;
static void restore_term(void)
{
tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
}
+/* We associate some data with the console for our exit hack. */
struct console_abort
{
+ /* How many times have they hit ^C? */
int count;
+ /* When did they start? */
struct timeval start;
};
-/* We DMA input to buffer bound at start of console page. */
+/* This is the routine which handles console input (ie. stdin). */
static bool handle_console_input(int fd, struct device *dev)
{
u32 irq = 0, *lenp;
@@ -460,24 +707,38 @@ static bool handle_console_input(int fd, struct device *dev)
struct iovec iov[LGUEST_MAX_DMA_SECTIONS];
struct console_abort *abort = dev->priv;
+ /* First we get the console buffer from the Guest. The key is dev->mem
+ * which was set to 0 in setup_console(). */
lenp = get_dma_buffer(fd, dev->mem, iov, &num, &irq);
if (!lenp) {
+ /* If it's not ready for input, warn and set up to discard. */
warn("console: no dma buffer!");
discard_iovec(iov, &num);
}
+ /* This is why we convert to iovecs: the readv() call uses them, and so
+ * it reads straight into the Guest's buffer. */
len = readv(dev->fd, iov, num);
if (len <= 0) {
+ /* This implies that the console is closed, is /dev/null, or
+ * something went terribly wrong. We still go through the rest
+ * of the logic, though, especially the exit handling below. */
warnx("Failed to get console input, ignoring console.");
len = 0;
}
+ /* If we read the data into the Guest, fill in the length and send the
+ * interrupt. */
if (lenp) {
*lenp = len;
trigger_irq(fd, irq);
}
- /* Three ^C within one second? Exit. */
+ /* Three ^C within one second? Exit.
+ *
+ * This is such a hack, but works surprisingly well. Each ^C has to be
+ * in a buffer by itself, so they can't be too fast. But we check that
+ * we get three within about a second, so they can't be too slow. */
if (len == 1 && ((char *)iov[0].iov_base)[0] == 3) {
if (!abort->count++)
gettimeofday(&abort->start, NULL);
@@ -485,43 +746,60 @@ static bool handle_console_input(int fd, struct device *dev)
struct timeval now;
gettimeofday(&now, NULL);
if (now.tv_sec <= abort->start.tv_sec+1) {
- /* Make sure waker is not blocked in BREAK */
u32 args[] = { LHREQ_BREAK, 0 };
+ /* Close the fd so Waker will know it has to
+ * exit. */
close(waker_fd);
+ /* Just in case waker is blocked in BREAK, send
+ * unbreak now. */
write(fd, args, sizeof(args));
exit(2);
}
abort->count = 0;
}
} else
+ /* Any other key resets the abort counter. */
abort->count = 0;
+ /* Now, if we didn't read anything, put the input terminal back and
+ * return failure (meaning, don't call us again). */
if (!len) {
restore_term();
return false;
}
+ /* Everything went OK! */
return true;
}
+/* Handling console output is much simpler than input. */
static u32 handle_console_output(int fd, const struct iovec *iov,
unsigned num, struct device*dev)
{
+ /* Whatever the Guest sends, write it to standard output. Return the
+ * number of bytes written. */
return writev(STDOUT_FILENO, iov, num);
}
+/* Guest->Host network output is also pretty easy. */
static u32 handle_tun_output(int fd, const struct iovec *iov,
unsigned num, struct device *dev)
{
- /* Now we've seen output, we should warn if we can't get buffers. */
+ /* We put a flag in the "priv" pointer of the network device, and set
+ * it as soon as we see output. We'll see why in handle_tun_input() */
*(bool *)dev->priv = true;
+ /* Whatever packet the Guest sent us, write it out to the tun
+ * device. */
return writev(dev->fd, iov, num);
}
+/* This matches the peer_key() in lguest_net.c. The key for any given slot
+ * is the address of the network device's page plus 4 * the slot number. */
static unsigned long peer_offset(unsigned int peernum)
{
return 4 * peernum;
}
+/* This is where we handle a packet coming in from the tun device */
static bool handle_tun_input(int fd, struct device *dev)
{
u32 irq = 0, *lenp;
@@ -529,17 +807,28 @@ static bool handle_tun_input(int fd, struct device *dev)
unsigned num;
struct iovec iov[LGUEST_MAX_DMA_SECTIONS];
+ /* First we get a buffer the Guest has bound to its key. */
lenp = get_dma_buffer(fd, dev->mem+peer_offset(NET_PEERNUM), iov, &num,
&irq);
if (!lenp) {
+ /* Now, it's expected that if we try to send a packet too
+ * early, the Guest won't be ready yet. This is why we set a
+ * flag when the Guest sends its first packet. If it's sent a
+ * packet we assume it should be ready to receive them.
+ *
+ * Actually, this is what the status bits in the descriptor are
+ * for: we should *use* them. FIXME! */
if (*(bool *)dev->priv)
warn("network: no dma buffer!");
discard_iovec(iov, &num);
}
+ /* Read the packet from the device directly into the Guest's buffer. */
len = readv(dev->fd, iov, num);
if (len <= 0)
err(1, "reading network");
+
+ /* Write the used_len, and trigger the interrupt for the Guest */
if (lenp) {
*lenp = len;
trigger_irq(fd, irq);
@@ -547,9 +836,13 @@ static bool handle_tun_input(int fd, struct device *dev)
verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
((u8 *)iov[0].iov_base)[0], ((u8 *)iov[0].iov_base)[1],
lenp ? "sent" : "discarded");
+ /* All good. */
return true;
}
+/* The last device handling routine is block output: the Guest has sent a DMA
+ * to the block device. It will have placed the command it wants in the
+ * "struct lguest_block_page". */
static u32 handle_block_output(int fd, const struct iovec *iov,
unsigned num, struct device *dev)
{
@@ -559,36 +852,64 @@ static u32 handle_block_output(int fd, const struct iovec *iov,
struct iovec reply[LGUEST_MAX_DMA_SECTIONS];
off64_t device_len, off = (off64_t)p->sector * 512;
+ /* First we extract the device length from the dev->priv pointer. */
device_len = *(off64_t *)dev->priv;
+ /* We first check that the read or write is within the length of the
+ * block file. */
if (off >= device_len)
err(1, "Bad offset %llu vs %llu", off, device_len);
+ /* Move to the right location in the block file. This shouldn't fail,
+ * but best to check. */
if (lseek64(dev->fd, off, SEEK_SET) != off)
err(1, "Bad seek to sector %i", p->sector);
verbose("Block: %s at offset %llu\n", p->type ? "WRITE" : "READ", off);
+ /* They were supposed to bind a reply buffer at key equal to the start
+ * of the block device memory. We need this to tell them when the
+ * request is finished. */
lenp = get_dma_buffer(fd, dev->mem, reply, &reply_num, &irq);
if (!lenp)
err(1, "Block request didn't give us a dma buffer");
if (p->type) {
+ /* A write request. The DMA they sent contained the data, so
+ * write it out. */
len = writev(dev->fd, iov, num);
+ /* Grr... Now we know how long the "struct lguest_dma" they
+ * sent was, we make sure they didn't try to write over the end
+ * of the block file (possibly extending it). */
if (off + len > device_len) {
+ /* Trim it back to the correct length */
ftruncate(dev->fd, device_len);
+ /* Die, bad Guest, die. */
errx(1, "Write past end %llu+%u", off, len);
}
+ /* The reply length is 0: we just send back an empty DMA to
+ * interrupt them and tell them the write is finished. */
*lenp = 0;
} else {
+ /* A read request. They sent an empty DMA to start the
+ * request, and we put the read contents into the reply
+ * buffer. */
len = readv(dev->fd, reply, reply_num);
*lenp = len;
}
+ /* The result is 1 (done), 2 if there was an error (short read or
+ * write). */
p->result = 1 + (p->bytes != len);
+ /* Now tell them we've used their reply buffer. */
trigger_irq(fd, irq);
+
+ /* We're supposed to return the number of bytes of the output buffer we
+ * used. But the block device uses the "result" field instead, so we
+ * don't bother. */
return 0;
}
+/* This is the generic routine we call when the Guest sends some DMA out. */
static void handle_output(int fd, unsigned long dma, unsigned long key,
struct device_list *devices)
{
@@ -597,30 +918,53 @@ static void handle_output(int fd, unsigned long dma, unsigned long key,
struct iovec iov[LGUEST_MAX_DMA_SECTIONS];
unsigned num = 0;
+ /* Convert the "struct lguest_dma" they're sending to a "struct
+ * iovec". */
lenp = dma2iov(dma, iov, &num);
+
+ /* Check each device: if they expect output to this key, tell them to
+ * handle it. */
for (i = devices->dev; i; i = i->next) {
if (i->handle_output && key == i->watch_key) {
+ /* We write the result straight into the used_len field
+ * for them. */
*lenp = i->handle_output(fd, iov, num, i);
return;
}
}
+
+ /* This can happen: the kernel sends any SEND_DMA which doesn't match
+ * another Guest to us. It could be that another Guest just left a
+ * network, for example. But it's unusual. */
warnx("Pending dma %p, key %p", (void *)dma, (void *)key);
}
+/* This is called when the waker wakes us up: check for incoming file
+ * descriptors. */
static void handle_input(int fd, struct device_list *devices)
{
+ /* select() wants a zeroed timeval to mean "don't wait". */
struct timeval poll = { .tv_sec = 0, .tv_usec = 0 };
for (;;) {
struct device *i;
fd_set fds = devices->infds;
+ /* If nothing is ready, we're done. */
if (select(devices->max_infd+1, &fds, NULL, NULL, &poll) == 0)
break;
+ /* Otherwise, call the device(s) which have readable
+ * file descriptors and a method of handling them. */
for (i = devices->dev; i; i = i->next) {
if (i->handle_input && FD_ISSET(i->fd, &fds)) {
+ /* If handle_input() returns false, it means we
+ * should no longer service it.
+ * handle_console_input() does this. */
if (!i->handle_input(fd, i)) {
+ /* Clear it from the set of input file
+ * descriptors kept at the head of the
+ * device list. */
FD_CLR(i->fd, &devices->infds);
/* Tell waker to ignore it too... */
write(waker_fd, &i->fd, sizeof(i->fd));
@@ -630,6 +974,15 @@ static void handle_input(int fd, struct device_list *devices)
}
}
+/*L:190
+ * Device Setup
+ *
+ * All devices need a descriptor so the Guest knows it exists, and a "struct
+ * device" so the Launcher can keep track of it. We have common helper
+ * routines to allocate them.
+ *
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
+ * table in the devices array just above the Guest's normal memory. */
static struct lguest_device_desc *
new_dev_desc(struct lguest_device_desc *descs,
u16 type, u16 features, u16 num_pages)
@@ -641,6 +994,8 @@ new_dev_desc(struct lguest_device_desc *descs,
descs[i].type = type;
descs[i].features = features;
descs[i].num_pages = num_pages;
+ /* If they said the device needs memory, we allocate
+ * that now, bumping up the top of Guest memory. */
if (num_pages) {
map_zeroed_pages(top, num_pages);
descs[i].pfn = top/getpagesize();
@@ -652,6 +1007,9 @@ new_dev_desc(struct lguest_device_desc *descs,
errx(1, "too many devices");
}
+/* This monster routine does all the creation and setup of a new device,
+ * including caling new_dev_desc() to allocate the descriptor and device
+ * memory. */
static struct device *new_device(struct device_list *devices,
u16 type, u16 num_pages, u16 features,
int fd,
@@ -664,12 +1022,18 @@ static struct device *new_device(struct device_list *devices,
{
struct device *dev = malloc(sizeof(*dev));
- /* Append to device list. */
+ /* Append to device list. Prepending to a single-linked list is
+ * easier, but the user expects the devices to be arranged on the bus
+ * in command-line order. The first network device on the command line
+ * is eth0, the first block device /dev/lgba, etc. */
*devices->lastdev = dev;
dev->next = NULL;
devices->lastdev = &dev->next;
+ /* Now we populate the fields one at a time. */
dev->fd = fd;
+ /* If we have an input handler for this file descriptor, then we add it
+ * to the device_list's fdset and maxfd. */
if (handle_input)
set_fd(dev->fd, devices);
dev->desc = new_dev_desc(devices->descs, type, features, num_pages);
@@ -680,27 +1044,37 @@ static struct device *new_device(struct device_list *devices,
return dev;
}
+/* Our first setup routine is the console. It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be. */
static void setup_console(struct device_list *devices)
{
struct device *dev;
+ /* If we can save the initial standard input settings... */
if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
struct termios term = orig_term;
+ /* Then we turn off echo, line buffering and ^C etc. We want a
+ * raw input stream to the Guest. */
term.c_lflag &= ~(ISIG|ICANON|ECHO);
tcsetattr(STDIN_FILENO, TCSANOW, &term);
+ /* If we exit gracefully, the original settings will be
+ * restored so the user can see what they're typing. */
atexit(restore_term);
}
- /* We don't currently require a page for the console. */
+ /* We don't currently require any memory for the console, so we ask for
+ * 0 pages. */
dev = new_device(devices, LGUEST_DEVICE_T_CONSOLE, 0, 0,
STDIN_FILENO, handle_console_input,
LGUEST_CONSOLE_DMA_KEY, handle_console_output);
+ /* We store the console state in dev->priv, and initialize it. */
dev->priv = malloc(sizeof(struct console_abort));
((struct console_abort *)dev->priv)->count = 0;
verbose("device %p: console\n",
(void *)(dev->desc->pfn * getpagesize()));
}
+/* Setting up a block file is also fairly straightforward. */
static void setup_block_file(const char *filename, struct device_list *devices)
{
int fd;
@@ -708,20 +1082,47 @@ static void setup_block_file(const char *filename, struct device_list *devices)
off64_t *device_len;
struct lguest_block_page *p;
+ /* We open with O_LARGEFILE because otherwise we get stuck at 2G. We
+ * open with O_DIRECT because otherwise our benchmarks go much too
+ * fast. */
fd = open_or_die(filename, O_RDWR|O_LARGEFILE|O_DIRECT);
+
+ /* We want one page, and have no input handler (the block file never
+ * has anything interesting to say to us). Our timing will be quite
+ * random, so it should be a reasonable randomness source. */
dev = new_device(devices, LGUEST_DEVICE_T_BLOCK, 1,
LGUEST_DEVICE_F_RANDOMNESS,
fd, NULL, 0, handle_block_output);
+
+ /* We store the device size in the private area */
device_len = dev->priv = malloc(sizeof(*device_len));
+ /* This is the safe way of establishing the size of our device: it
+ * might be a normal file or an actual block device like /dev/hdb. */
*device_len = lseek64(fd, 0, SEEK_END);
- p = dev->mem;
+ /* The device memory is a "struct lguest_block_page". It's zeroed
+ * already, we just need to put in the device size. Block devices
+ * think in sectors (ie. 512 byte chunks), so we translate here. */
+ p = dev->mem;
p->num_sectors = *device_len/512;
verbose("device %p: block %i sectors\n",
(void *)(dev->desc->pfn * getpagesize()), p->num_sectors);
}
-/* We use fnctl locks to reserve network slots (autocleanup!) */
+/*
+ * Network Devices.
+ *
+ * Setting up network devices is quite a pain, because we have three types.
+ * First, we have the inter-Guest network. This is a file which is mapped into
+ * the address space of the Guests who are on the network. Because it is a
+ * shared mapping, the same page underlies all the devices, and they can send
+ * DMA to each other.
+ *
+ * Remember from our network driver, the Guest is told what slot in the page it
+ * is to use. We use exclusive fnctl locks to reserve a slot. If another
+ * Guest is using a slot, the lock will fail and we try another. Because fnctl
+ * locks are cleaned up automatically when we die, this cleverly means that our
+ * reservation on the slot will vanish if we crash. */
static unsigned int find_slot(int netfd, const char *filename)
{
struct flock fl;
@@ -729,26 +1130,33 @@ static unsigned int find_slot(int netfd, const char *filename)
fl.l_type = F_WRLCK;
fl.l_whence = SEEK_SET;
fl.l_len = 1;
+ /* Try a 1 byte lock in each possible position number */
for (fl.l_start = 0;
fl.l_start < getpagesize()/sizeof(struct lguest_net);
fl.l_start++) {
+ /* If we succeed, return the slot number. */
if (fcntl(netfd, F_SETLK, &fl) == 0)
return fl.l_start;
}
errx(1, "No free slots in network file %s", filename);
}
+/* This function sets up the network file */
static void setup_net_file(const char *filename,
struct device_list *devices)
{
int netfd;
struct device *dev;
+ /* We don't use open_or_die() here: for friendliness we create the file
+ * if it doesn't already exist. */
netfd = open(filename, O_RDWR, 0);
if (netfd < 0) {
if (errno == ENOENT) {
netfd = open(filename, O_RDWR|O_CREAT, 0600);
if (netfd >= 0) {
+ /* If we succeeded, initialize the file with a
+ * blank page. */
char page[getpagesize()];
memset(page, 0, sizeof(page));
write(netfd, page, sizeof(page));
@@ -758,11 +1166,15 @@ static void setup_net_file(const char *filename,
err(1, "cannot open net file '%s'", filename);
}
+ /* We need 1 page, and the features indicate the slot to use and that
+ * no checksum is needed. We never touch this device again; it's
+ * between the Guests on the network, so we don't register input or
+ * output handlers. */
dev = new_device(devices, LGUEST_DEVICE_T_NET, 1,
find_slot(netfd, filename)|LGUEST_NET_F_NOCSUM,
-1, NULL, 0, NULL);
- /* We overwrite the /dev/zero mapping with the actual file. */
+ /* Map the shared file. */
if (mmap(dev->mem, getpagesize(), PROT_READ|PROT_WRITE,
MAP_FIXED|MAP_SHARED, netfd, 0) != dev->mem)
err(1, "could not mmap '%s'", filename);
@@ -770,6 +1182,7 @@ static void setup_net_file(const char *filename,
(void *)(dev->desc->pfn * getpagesize()), filename,
dev->desc->features & ~LGUEST_NET_F_NOCSUM);
}
+/*:*/
static u32 str2ip(const char *ipaddr)
{
@@ -779,7 +1192,11 @@ static u32 str2ip(const char *ipaddr)
return (byte[0] << 24) | (byte[1] << 16) | (byte[2] << 8) | byte[3];
}
-/* adapted from libbridge */
+/* This code is "adapted" from libbridge: it attaches the Host end of the
+ * network device to the bridge device specified by the command line.
+ *
+ * This is yet another James Morris contribution (I'm an IP-level guy, so I
+ * dislike bridging), and I just try not to break it. */
static void add_to_bridge(int fd, const char *if_name, const char *br_name)
{
int ifidx;
@@ -798,12 +1215,16 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
err(1, "can't add %s to bridge %s", if_name, br_name);
}
+/* This sets up the Host end of the network device with an IP address, brings
+ * it up so packets will flow, the copies the MAC address into the hwaddr
+ * pointer (in practice, the Host's slot in the network device's memory). */
static void configure_device(int fd, const char *devname, u32 ipaddr,
unsigned char hwaddr[6])
{
struct ifreq ifr;
struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
+ /* Don't read these incantations. Just cut & paste them like I did! */
memset(&ifr, 0, sizeof(ifr));
strcpy(ifr.ifr_name, devname);
sin->sin_family = AF_INET;
@@ -814,12 +1235,19 @@ static void configure_device(int fd, const char *devname, u32 ipaddr,
if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
err(1, "Bringing interface %s up", devname);
+ /* SIOC stands for Socket I/O Control. G means Get (vs S for Set
+ * above). IF means Interface, and HWADDR is hardware address.
+ * Simple! */
if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
err(1, "getting hw address for %s", devname);
-
memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
}
+/*L:195 The other kind of network is a Host<->Guest network. This can either
+ * use briding or routing, but the principle is the same: it uses the "tun"
+ * device to inject packets into the Host as if they came in from a normal
+ * network card. We just shunt packets between the Guest and the tun
+ * device. */
static void setup_tun_net(const char *arg, struct device_list *devices)
{
struct device *dev;
@@ -828,36 +1256,56 @@ static void setup_tun_net(const char *arg, struct device_list *devices)
u32 ip;
const char *br_name = NULL;
+ /* We open the /dev/net/tun device and tell it we want a tap device. A
+ * tap device is like a tun device, only somehow different. To tell
+ * the truth, I completely blundered my way through this code, but it
+ * works now! */
netfd = open_or_die("/dev/net/tun", O_RDWR);
memset(&ifr, 0, sizeof(ifr));
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
strcpy(ifr.ifr_name, "tap%d");
if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
err(1, "configuring /dev/net/tun");
+ /* We don't need checksums calculated for packets coming in this
+ * device: trust us! */
ioctl(netfd, TUNSETNOCSUM, 1);
- /* You will be peer 1: we should create enough jitter to randomize */
+ /* We create the net device with 1 page, using the features field of
+ * the descriptor to tell the Guest it is in slot 1 (NET_PEERNUM), and
+ * that the device has fairly random timing. We do *not* specify
+ * LGUEST_NET_F_NOCSUM: these packets can reach the real world.
+ *
+ * We will put our MAC address is slot 0 for the Guest to see, so
+ * it will send packets to us using the key "peer_offset(0)": */
dev = new_device(devices, LGUEST_DEVICE_T_NET, 1,
NET_PEERNUM|LGUEST_DEVICE_F_RANDOMNESS, netfd,
handle_tun_input, peer_offset(0), handle_tun_output);
+
+ /* We keep a flag which says whether we've seen packets come out from
+ * this network device. */
dev->priv = malloc(sizeof(bool));
*(bool *)dev->priv = false;
+ /* We need a socket to perform the magic network ioctls to bring up the
+ * tap interface, connect to the bridge etc. Any socket will do! */
ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
if (ipfd < 0)
err(1, "opening IP socket");
+ /* If the command line was --tunnet=bridge:<name> do bridging. */
if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
ip = INADDR_ANY;
br_name = arg + strlen(BRIDGE_PFX);
add_to_bridge(ipfd, ifr.ifr_name, br_name);
- } else
+ } else /* It is an IP address to set up the device with */
ip = str2ip(arg);
- /* We are peer 0, ie. first slot. */
+ /* We are peer 0, ie. first slot, so we hand dev->mem to this routine
+ * to write the MAC address at the start of the device memory. */
configure_device(ipfd, ifr.ifr_name, ip, dev->mem);
- /* Set "promisc" bit: we want every single packet. */
+ /* Set "promisc" bit: we want every single packet if we're going to
+ * bridge to other machines (and otherwise it doesn't matter). */
*((u8 *)dev->mem) |= 0x1;
close(ipfd);
@@ -868,7 +1316,10 @@ static void setup_tun_net(const char *arg, struct device_list *devices)
if (br_name)
verbose("attached to bridge: %s\n", br_name);
}
+/* That's the end of device setup. */
+/*L:220 Finally we reach the core of the Launcher, which runs the Guest, serves
+ * its input and output, and finally, lays it to rest. */
static void __attribute__((noreturn))
run_guest(int lguest_fd, struct device_list *device_list)
{
@@ -880,20 +1331,37 @@ run_guest(int lguest_fd, struct device_list *device_list)
/* We read from the /dev/lguest device to run the Guest. */
readval = read(lguest_fd, arr, sizeof(arr));
+ /* The read can only really return sizeof(arr) (the Guest did a
+ * SEND_DMA to us), or an error. */
+
+ /* For a successful read, arr[0] is the address of the "struct
+ * lguest_dma", and arr[1] is the key the Guest sent to. */
if (readval == sizeof(arr)) {
handle_output(lguest_fd, arr[0], arr[1], device_list);
continue;
+ /* ENOENT means the Guest died. Reading tells us why. */
} else if (errno == ENOENT) {
char reason[1024] = { 0 };
read(lguest_fd, reason, sizeof(reason)-1);
errx(1, "%s", reason);
+ /* EAGAIN means the waker wanted us to look at some input.
+ * Anything else means a bug or incompatible change. */
} else if (errno != EAGAIN)
err(1, "Running guest failed");
+
+ /* Service input, then unset the BREAK which releases
+ * the Waker. */
handle_input(lguest_fd, device_list);
if (write(lguest_fd, args, sizeof(args)) < 0)
err(1, "Resetting break");
}
}
+/*
+ * This is the end of the Launcher.
+ *
+ * But wait! We've seen I/O from the Launcher, and we've seen I/O from the
+ * Drivers. If we were to see the Host kernel I/O code, our understanding
+ * would be complete... :*/
static struct option opts[] = {
{ "verbose", 0, NULL, 'v' },
@@ -911,20 +1379,49 @@ static void usage(void)
"<mem-in-mb> vmlinux [args...]");
}
+/*L:100 The Launcher code itself takes us out into userspace, that scary place
+ * where pointers run wild and free! Unfortunately, like most userspace
+ * programs, it's quite boring (which is why everyone like to hack on the
+ * kernel!). Perhaps if you make up an Lguest Drinking Game at this point, it
+ * will get you through this section. Or, maybe not.
+ *
+ * The Launcher binary sits up high, usually starting at address 0xB8000000.
+ * Everything below this is the "physical" memory for the Guest. For example,
+ * if the Guest were to write a "1" at physical address 0, we would see a "1"
+ * in the Launcher at "(int *)0". Guest physical == Launcher virtual.
+ *
+ * This can be tough to get your head around, but usually it just means that we
+ * don't need to do any conversion when the Guest gives us it's "physical"
+ * addresses.
+ */
int main(int argc, char *argv[])
{
+ /* Memory, top-level pagetable, code startpoint, PAGE_OFFSET and size
+ * of the (optional) initrd. */
unsigned long mem = 0, pgdir, start, page_offset, initrd_size = 0;
+ /* A temporary and the /dev/lguest file descriptor. */
int i, c, lguest_fd;
+ /* The list of Guest devices, based on command line arguments. */
struct device_list device_list;
+ /* The boot information for the Guest: at guest-physical address 0. */
void *boot = (void *)0;
+ /* If they specify an initrd file to load. */
const char *initrd_name = NULL;
+ /* First we initialize the device list. Since console and network
+ * device receive input from a file descriptor, we keep an fdset
+ * (infds) and the maximum fd number (max_infd) with the head of the
+ * list. We also keep a pointer to the last device, for easy appending
+ * to the list. */
device_list.max_infd = -1;
device_list.dev = NULL;
device_list.lastdev = &device_list.dev;
FD_ZERO(&device_list.infds);
- /* We need to know how much memory so we can allocate devices. */
+ /* We need to know how much memory so we can set up the device
+ * descriptor and memory pages for the devices as we parse the command
+ * line. So we quickly look through the arguments to find the amount
+ * of memory now. */
for (i = 1; i < argc; i++) {
if (argv[i][0] != '-') {
mem = top = atoi(argv[i]) * 1024 * 1024;
@@ -933,6 +1430,8 @@ int main(int argc, char *argv[])
break;
}
}
+
+ /* The options are fairly straight-forward */
while ((c = getopt_long(argc, argv, "v", opts, NULL)) != EOF) {
switch (c) {
case 'v':
@@ -955,42 +1454,71 @@ int main(int argc, char *argv[])
usage();
}
}
+ /* After the other arguments we expect memory and kernel image name,
+ * followed by command line arguments for the kernel. */
if (optind + 2 > argc)
usage();
- /* We need a console device */
+ /* We always have a console device */
setup_console(&device_list);
- /* First we map /dev/zero over all of guest-physical memory. */
+ /* We start by mapping anonymous pages over all of guest-physical
+ * memory range. This fills it with 0, and ensures that the Guest
+ * won't be killed when it tries to access it. */
map_zeroed_pages(0, mem / getpagesize());
/* Now we load the kernel */
start = load_kernel(open_or_die(argv[optind+1], O_RDONLY),
&page_offset);
- /* Map the initrd image if requested */
+ /* Map the initrd image if requested (at top of physical memory) */
if (initrd_name) {
initrd_size = load_initrd(initrd_name, mem);
+ /* These are the location in the Linux boot header where the
+ * start and size of the initrd are expected to be found. */
*(unsigned long *)(boot+0x218) = mem - initrd_size;
*(unsigned long *)(boot+0x21c) = initrd_size;
+ /* The bootloader type 0xFF means "unknown"; that's OK. */
*(unsigned char *)(boot+0x210) = 0xFF;
}
- /* Set up the initial linar pagetables. */
+ /* Set up the initial linear pagetables, starting below the initrd. */
pgdir = setup_pagetables(mem, initrd_size, page_offset);
- /* E820 memory map: ours is a simple, single region. */
+ /* The Linux boot header contains an "E820" memory map: ours is a
+ * simple, single region. */
*(char*)(boot+E820NR) = 1;
*((struct e820entry *)(boot+E820MAP))
= ((struct e820entry) { 0, mem, E820_RAM });
- /* Command line pointer and command line (at 4096) */
+ /* The boot header contains a command line pointer: we put the command
+ * line after the boot header (at address 4096) */
*(void **)(boot + 0x228) = boot + 4096;
concat(boot + 4096, argv+optind+2);
- /* Paravirt type: 1 == lguest */
+
+ /* The guest type value of "1" tells the Guest it's under lguest. */
*(int *)(boot + 0x23c) = 1;
+ /* We tell the kernel to initialize the Guest: this returns the open
+ * /dev/lguest file descriptor. */
lguest_fd = tell_kernel(pgdir, start, page_offset);
+
+ /* We fork off a child process, which wakes the Launcher whenever one
+ * of the input file descriptors needs attention. Otherwise we would
+ * run the Guest until it tries to output something. */
waker_fd = setup_waker(lguest_fd, &device_list);
+ /* Finally, run the Guest. This doesn't return. */
run_guest(lguest_fd, &device_list);
}
+/*:*/
+
+/*M:999
+ * Mastery is done: you now know everything I do.
+ *
+ * But surely you have seen code, features and bugs in your wanderings which
+ * you now yearn to attack? That is the real game, and I look forward to you
+ * patching and forking lguest into the Your-Name-Here-visor.
+ *
+ * Farewell, and good coding!
+ * Rusty Russell.
+ */