aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/filesystems/fuse.txt341
1 files changed, 341 insertions, 0 deletions
diff --git a/Documentation/filesystems/fuse.txt b/Documentation/filesystems/fuse.txt
new file mode 100644
index 00000000000..83f96cf5696
--- /dev/null
+++ b/Documentation/filesystems/fuse.txt
@@ -0,0 +1,341 @@
+Definitions
+~~~~~~~~~~~
+
+Userspace filesystem:
+
+ A filesystem in which data and metadata are provided by an ordinary
+ userspace process. The filesystem can be accessed normally through
+ the kernel interface.
+
+Filesystem daemon:
+
+ The process(es) providing the data and metadata of the filesystem.
+
+Non-privileged mount (or user mount):
+
+ A userspace filesystem mounted by a non-privileged (non-root) user.
+ The filesystem daemon is running with the privileges of the mounting
+ user. NOTE: this is not the same as mounts allowed with the "user"
+ option in /etc/fstab, which is not discussed here.
+
+Mount owner:
+
+ The user who does the mounting.
+
+User:
+
+ The user who is performing filesystem operations.
+
+What is FUSE?
+~~~~~~~~~~~~~
+
+FUSE is a userspace filesystem framework. It consists of a kernel
+module (fuse.ko), a userspace library (libfuse.*) and a mount utility
+(fusermount).
+
+One of the most important features of FUSE is allowing secure,
+non-privileged mounts. This opens up new possibilities for the use of
+filesystems. A good example is sshfs: a secure network filesystem
+using the sftp protocol.
+
+The userspace library and utilities are available from the FUSE
+homepage:
+
+ http://fuse.sourceforge.net/
+
+Mount options
+~~~~~~~~~~~~~
+
+'fd=N'
+
+ The file descriptor to use for communication between the userspace
+ filesystem and the kernel. The file descriptor must have been
+ obtained by opening the FUSE device ('/dev/fuse').
+
+'rootmode=M'
+
+ The file mode of the filesystem's root in octal representation.
+
+'user_id=N'
+
+ The numeric user id of the mount owner.
+
+'group_id=N'
+
+ The numeric group id of the mount owner.
+
+'default_permissions'
+
+ By default FUSE doesn't check file access permissions, the
+ filesystem is free to implement it's access policy or leave it to
+ the underlying file access mechanism (e.g. in case of network
+ filesystems). This option enables permission checking, restricting
+ access based on file mode. This is option is usually useful
+ together with the 'allow_other' mount option.
+
+'allow_other'
+
+ This option overrides the security measure restricting file access
+ to the user mounting the filesystem. This option is by default only
+ allowed to root, but this restriction can be removed with a
+ (userspace) configuration option.
+
+'kernel_cache'
+
+ This option disables flushing the cache of the file contents on
+ every open(). This should only be enabled on filesystems, where the
+ file data is never changed externally (not through the mounted FUSE
+ filesystem). Thus it is not suitable for network filesystems and
+ other "intermediate" filesystems.
+
+ NOTE: if this option is not specified (and neither 'direct_io') data
+ is still cached after the open(), so a read() system call will not
+ always initiate a read operation.
+
+'direct_io'
+
+ This option disables the use of page cache (file content cache) in
+ the kernel for this filesystem. This has several affects:
+
+ - Each read() or write() system call will initiate one or more
+ read or write operations, data will not be cached in the
+ kernel.
+
+ - The return value of the read() and write() system calls will
+ correspond to the return values of the read and write
+ operations. This is useful for example if the file size is not
+ known in advance (before reading it).
+
+'max_read=N'
+
+ With this option the maximum size of read operations can be set.
+ The default is infinite. Note that the size of read requests is
+ limited anyway to 32 pages (which is 128kbyte on i386).
+
+How do non-privileged mounts work?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Since the mount() system call is a privileged operation, a helper
+program (fusermount) is needed, which is installed setuid root.
+
+The implication of providing non-privileged mounts is that the mount
+owner must not be able to use this capability to compromise the
+system. Obvious requirements arising from this are:
+
+ A) mount owner should not be able to get elevated privileges with the
+ help of the mounted filesystem
+
+ B) mount owner should not get illegitimate access to information from
+ other users' and the super user's processes
+
+ C) mount owner should not be able to induce undesired behavior in
+ other users' or the super user's processes
+
+How are requirements fulfilled?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ A) The mount owner could gain elevated privileges by either:
+
+ 1) creating a filesystem containing a device file, then opening
+ this device
+
+ 2) creating a filesystem containing a suid or sgid application,
+ then executing this application
+
+ The solution is not to allow opening device files and ignore
+ setuid and setgid bits when executing programs. To ensure this
+ fusermount always adds "nosuid" and "nodev" to the mount options
+ for non-privileged mounts.
+
+ B) If another user is accessing files or directories in the
+ filesystem, the filesystem daemon serving requests can record the
+ exact sequence and timing of operations performed. This
+ information is otherwise inaccessible to the mount owner, so this
+ counts as an information leak.
+
+ The solution to this problem will be presented in point 2) of C).
+
+ C) There are several ways in which the mount owner can induce
+ undesired behavior in other users' processes, such as:
+
+ 1) mounting a filesystem over a file or directory which the mount
+ owner could otherwise not be able to modify (or could only
+ make limited modifications).
+
+ This is solved in fusermount, by checking the access
+ permissions on the mountpoint and only allowing the mount if
+ the mount owner can do unlimited modification (has write
+ access to the mountpoint, and mountpoint is not a "sticky"
+ directory)
+
+ 2) Even if 1) is solved the mount owner can change the behavior
+ of other users' processes.
+
+ i) It can slow down or indefinitely delay the execution of a
+ filesystem operation creating a DoS against the user or the
+ whole system. For example a suid application locking a
+ system file, and then accessing a file on the mount owner's
+ filesystem could be stopped, and thus causing the system
+ file to be locked forever.
+
+ ii) It can present files or directories of unlimited length, or
+ directory structures of unlimited depth, possibly causing a
+ system process to eat up diskspace, memory or other
+ resources, again causing DoS.
+
+ The solution to this as well as B) is not to allow processes
+ to access the filesystem, which could otherwise not be
+ monitored or manipulated by the mount owner. Since if the
+ mount owner can ptrace a process, it can do all of the above
+ without using a FUSE mount, the same criteria as used in
+ ptrace can be used to check if a process is allowed to access
+ the filesystem or not.
+
+ Note that the ptrace check is not strictly necessary to
+ prevent B/2/i, it is enough to check if mount owner has enough
+ privilege to send signal to the process accessing the
+ filesystem, since SIGSTOP can be used to get a similar effect.
+
+I think these limitations are unacceptable?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If a sysadmin trusts the users enough, or can ensure through other
+measures, that system processes will never enter non-privileged
+mounts, it can relax the last limitation with a "user_allow_other"
+config option. If this config option is set, the mounting user can
+add the "allow_other" mount option which disables the check for other
+users' processes.
+
+Kernel - userspace interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following diagram shows how a filesystem operation (in this
+example unlink) is performed in FUSE.
+
+NOTE: everything in this description is greatly simplified
+
+ | "rm /mnt/fuse/file" | FUSE filesystem daemon
+ | |
+ | | >sys_read()
+ | | >fuse_dev_read()
+ | | >request_wait()
+ | | [sleep on fc->waitq]
+ | |
+ | >sys_unlink() |
+ | >fuse_unlink() |
+ | [get request from |
+ | fc->unused_list] |
+ | >request_send() |
+ | [queue req on fc->pending] |
+ | [wake up fc->waitq] | [woken up]
+ | >request_wait_answer() |
+ | [sleep on req->waitq] |
+ | | <request_wait()
+ | | [remove req from fc->pending]
+ | | [copy req to read buffer]
+ | | [add req to fc->processing]
+ | | <fuse_dev_read()
+ | | <sys_read()
+ | |
+ | | [perform unlink]
+ | |
+ | | >sys_write()
+ | | >fuse_dev_write()
+ | | [look up req in fc->processing]
+ | | [remove from fc->processing]
+ | | [copy write buffer to req]
+ | [woken up] | [wake up req->waitq]
+ | | <fuse_dev_write()
+ | | <sys_write()
+ | <request_wait_answer() |
+ | <request_send() |
+ | [add request to |
+ | fc->unused_list] |
+ | <fuse_unlink() |
+ | <sys_unlink() |
+
+There are a couple of ways in which to deadlock a FUSE filesystem.
+Since we are talking about unprivileged userspace programs,
+something must be done about these.
+
+Scenario 1 - Simple deadlock
+-----------------------------
+
+ | "rm /mnt/fuse/file" | FUSE filesystem daemon
+ | |
+ | >sys_unlink("/mnt/fuse/file") |
+ | [acquire inode semaphore |
+ | for "file"] |
+ | >fuse_unlink() |
+ | [sleep on req->waitq] |
+ | | <sys_read()
+ | | >sys_unlink("/mnt/fuse/file")
+ | | [acquire inode semaphore
+ | | for "file"]
+ | | *DEADLOCK*
+
+The solution for this is to allow requests to be interrupted while
+they are in userspace:
+
+ | [interrupted by signal] |
+ | <fuse_unlink() |
+ | [release semaphore] | [semaphore acquired]
+ | <sys_unlink() |
+ | | >fuse_unlink()
+ | | [queue req on fc->pending]
+ | | [wake up fc->waitq]
+ | | [sleep on req->waitq]
+
+If the filesystem daemon was single threaded, this will stop here,
+since there's no other thread to dequeue and execute the request.
+In this case the solution is to kill the FUSE daemon as well. If
+there are multiple serving threads, you just have to kill them as
+long as any remain.
+
+Moral: a filesystem which deadlocks, can soon find itself dead.
+
+Scenario 2 - Tricky deadlock
+----------------------------
+
+This one needs a carefully crafted filesystem. It's a variation on
+the above, only the call back to the filesystem is not explicit,
+but is caused by a pagefault.
+
+ | Kamikaze filesystem thread 1 | Kamikaze filesystem thread 2
+ | |
+ | [fd = open("/mnt/fuse/file")] | [request served normally]
+ | [mmap fd to 'addr'] |
+ | [close fd] | [FLUSH triggers 'magic' flag]
+ | [read a byte from addr] |
+ | >do_page_fault() |
+ | [find or create page] |
+ | [lock page] |
+ | >fuse_readpage() |
+ | [queue READ request] |
+ | [sleep on req->waitq] |
+ | | [read request to buffer]
+ | | [create reply header before addr]
+ | | >sys_write(addr - headerlength)
+ | | >fuse_dev_write()
+ | | [look up req in fc->processing]
+ | | [remove from fc->processing]
+ | | [copy write buffer to req]
+ | | >do_page_fault()
+ | | [find or create page]
+ | | [lock page]
+ | | * DEADLOCK *
+
+Solution is again to let the the request be interrupted (not
+elaborated further).
+
+An additional problem is that while the write buffer is being
+copied to the request, the request must not be interrupted. This
+is because the destination address of the copy may not be valid
+after the request is interrupted.
+
+This is solved with doing the copy atomically, and allowing
+interruption while the page(s) belonging to the write buffer are
+faulted with get_user_pages(). The 'req->locked' flag indicates
+when the copy is taking place, and interruption is delayed until
+this flag is unset.
+