diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-regulator | 55 | ||||
| -rw-r--r-- | Documentation/filesystems/ocfs2.txt | 6 | ||||
| -rw-r--r-- | Documentation/power/regulator/machine.txt | 140 | ||||
| -rw-r--r-- | Documentation/power/regulator/regulator.txt | 8 |
4 files changed, 110 insertions, 99 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index 79a4a75b2d2..3731f6f29bc 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -1,7 +1,7 @@ What: /sys/class/regulator/.../state Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called state. This holds the regulator output state. @@ -27,7 +27,7 @@ Description: What: /sys/class/regulator/.../type Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called type. This holds the regulator type. @@ -51,7 +51,7 @@ Description: What: /sys/class/regulator/.../microvolts Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called microvolts. This holds the regulator output voltage setting @@ -65,7 +65,7 @@ Description: What: /sys/class/regulator/.../microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called microamps. This holds the regulator output current limit @@ -79,7 +79,7 @@ Description: What: /sys/class/regulator/.../opmode Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called opmode. This holds the regulator operating mode setting. @@ -102,7 +102,7 @@ Description: What: /sys/class/regulator/.../min_microvolts Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called min_microvolts. This holds the minimum safe working regulator @@ -116,7 +116,7 @@ Description: What: /sys/class/regulator/.../max_microvolts Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called max_microvolts. This holds the maximum safe working regulator @@ -130,7 +130,7 @@ Description: What: /sys/class/regulator/.../min_microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called min_microamps. This holds the minimum safe working regulator @@ -145,7 +145,7 @@ Description: What: /sys/class/regulator/.../max_microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called max_microamps. This holds the maximum safe working regulator @@ -157,10 +157,23 @@ Description: platform code. +What: /sys/class/regulator/.../name +Date: October 2008 +KernelVersion: 2.6.28 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Each regulator directory will contain a field called + name. This holds a string identifying the regulator for + display purposes. + + NOTE: this will be empty if no suitable name is provided + by platform or regulator drivers. + + What: /sys/class/regulator/.../num_users Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called num_users. This holds the number of consumer devices that @@ -170,7 +183,7 @@ Description: What: /sys/class/regulator/.../requested_microamps Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called requested_microamps. This holds the total requested load @@ -181,7 +194,7 @@ Description: What: /sys/class/regulator/.../parent Date: April 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Some regulator directories will contain a link called parent. This points to the parent or supply regulator if one exists. @@ -189,7 +202,7 @@ Description: What: /sys/class/regulator/.../suspend_mem_microvolts Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_mem_microvolts. This holds the regulator output @@ -203,7 +216,7 @@ Description: What: /sys/class/regulator/.../suspend_disk_microvolts Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_disk_microvolts. This holds the regulator output @@ -217,7 +230,7 @@ Description: What: /sys/class/regulator/.../suspend_standby_microvolts Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_standby_microvolts. This holds the regulator output @@ -231,7 +244,7 @@ Description: What: /sys/class/regulator/.../suspend_mem_mode Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_mem_mode. This holds the regulator operating mode @@ -245,7 +258,7 @@ Description: What: /sys/class/regulator/.../suspend_disk_mode Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_disk_mode. This holds the regulator operating mode @@ -258,7 +271,7 @@ Description: What: /sys/class/regulator/.../suspend_standby_mode Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_standby_mode. This holds the regulator operating mode @@ -272,7 +285,7 @@ Description: What: /sys/class/regulator/.../suspend_mem_state Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_mem_state. This holds the regulator operating state @@ -287,7 +300,7 @@ Description: What: /sys/class/regulator/.../suspend_disk_state Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_disk_state. This holds the regulator operating state @@ -302,7 +315,7 @@ Description: What: /sys/class/regulator/.../suspend_standby_state Date: May 2008 KernelVersion: 2.6.26 -Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Each regulator directory will contain a field called suspend_standby_state. This holds the regulator operating diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index c318a8bbb1e..4340cc82579 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -76,3 +76,9 @@ localalloc=8(*) Allows custom localalloc size in MB. If the value is too large, the fs will silently revert it to the default. Localalloc is not enabled for local mounts. localflocks This disables cluster aware flock. +inode64 Indicates that Ocfs2 is allowed to create inodes at + any location in the filesystem, including those which + will result in inode numbers occupying more than 32 + bits of significance. +user_xattr (*) Enables Extended User Attributes. +nouser_xattr Disables Extended User Attributes. diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index c9a35665cf7..ce3487d99ab 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -2,17 +2,8 @@ Regulator Machine Driver Interface =================================== The regulator machine driver interface is intended for board/machine specific -initialisation code to configure the regulator subsystem. Typical things that -machine drivers would do are :- +initialisation code to configure the regulator subsystem. - 1. Regulator -> Device mapping. - 2. Regulator supply configuration. - 3. Power Domain constraint setting. - - - -1. Regulator -> device mapping -============================== Consider the following machine :- Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] @@ -21,81 +12,82 @@ Consider the following machine :- The drivers for consumers A & B must be mapped to the correct regulator in order to control their power supply. This mapping can be achieved in machine -initialisation code by calling :- +initialisation code by creating a struct regulator_consumer_supply for +each regulator. + +struct regulator_consumer_supply { + struct device *dev; /* consumer */ + const char *supply; /* consumer supply - e.g. "vcc" */ +}; -int regulator_set_device_supply(const char *regulator, struct device *dev, - const char *supply); +e.g. for the machine above -and is shown with the following code :- +static struct regulator_consumer_supply regulator1_consumers[] = { +{ + .dev = &platform_consumerB_device.dev, + .supply = "Vcc", +},}; -regulator_set_device_supply("Regulator-1", devB, "Vcc"); -regulator_set_device_supply("Regulator-2", devA, "Vcc"); +static struct regulator_consumer_supply regulator2_consumers[] = { +{ + .dev = &platform_consumerA_device.dev, + .supply = "Vcc", +},}; This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 to the 'Vcc' supply for Consumer A. - -2. Regulator supply configuration. -================================== -Consider the following machine (again) :- - - Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] - | - +-> [Consumer B @ 3.3V] +Constraints can now be registered by defining a struct regulator_init_data +for each regulator power domain. This structure also maps the consumers +to their supply regulator :- + +static struct regulator_init_data regulator1_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(regulator1_consumers), + .consumer_supplies = regulator1_consumers, +}; Regulator-1 supplies power to Regulator-2. This relationship must be registered with the core so that Regulator-1 is also enabled when Consumer A enables it's -supply (Regulator-2). - -This relationship can be register with the core via :- - -int regulator_set_supply(const char *regulator, const char *regulator_supply); - -In this example we would use the following code :- - -regulator_set_supply("Regulator-2", "Regulator-1"); - -Relationships can be queried by calling :- - -const char *regulator_get_supply(const char *regulator); - - -3. Power Domain constraint setting. -=================================== -Each power domain within a system has physical constraints on voltage and -current. This must be defined in software so that the power domain is always -operated within specifications. - -Consider the following machine (again) :- - - Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] - | - +-> [Consumer B @ 3.3V] - -This gives us two regulators and two power domains: - - Domain 1: Regulator-2, Consumer B. - Domain 2: Consumer A. - -Constraints can be registered by calling :- - -int regulator_set_platform_constraints(const char *regulator, - struct regulation_constraints *constraints); - -The example is defined as follows :- - -struct regulation_constraints domain_1 = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, +supply (Regulator-2). The supply regulator is set by the supply_regulator_dev +field below:- + +static struct regulator_init_data regulator2_data = { + .supply_regulator_dev = &platform_regulator1_device.dev, + .constraints = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(regulator2_consumers), + .consumer_supplies = regulator2_consumers, }; -struct regulation_constraints domain_2 = { - .min_uV = 1800000, - .max_uV = 2000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, +Finally the regulator devices must be registered in the usual manner. + +static struct platform_device regulator_devices[] = { +{ + .name = "regulator", + .id = DCDC_1, + .dev = { + .platform_data = ®ulator1_data, + }, +}, +{ + .name = "regulator", + .id = DCDC_2, + .dev = { + .platform_data = ®ulator2_data, + }, +}, }; +/* register regulator 1 device */ +platform_device_register(&wm8350_regulator_devices[0]); -regulator_set_platform_constraints("Regulator-1", &domain_1); -regulator_set_platform_constraints("Regulator-2", &domain_2); +/* register regulator 2 device */ +platform_device_register(&wm8350_regulator_devices[1]); diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt index a6905014359..4200accb9bb 100644 --- a/Documentation/power/regulator/regulator.txt +++ b/Documentation/power/regulator/regulator.txt @@ -10,11 +10,11 @@ Registration Drivers can register a regulator by calling :- -struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, - void *reg_data); +struct regulator_dev *regulator_register(struct device *dev, + struct regulator_desc *regulator_desc); -This will register the regulators capabilities and operations the regulator -core. The core does not touch reg_data (private to regulator driver). +This will register the regulators capabilities and operations to the regulator +core. Regulators can be unregistered by calling :- |