diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/IRQ-affinity.txt | 37 | ||||
| -rw-r--r-- | Documentation/RCU/NMI-RCU.txt | 3 | ||||
| -rw-r--r-- | Documentation/RCU/RTFP.txt | 108 | ||||
| -rw-r--r-- | Documentation/RCU/checklist.txt | 89 | ||||
| -rw-r--r-- | Documentation/RCU/torture.txt | 48 | ||||
| -rw-r--r-- | Documentation/RCU/whatisRCU.txt | 58 | ||||
| -rw-r--r-- | Documentation/cputopology.txt | 26 | ||||
| -rw-r--r-- | Documentation/feature-removal-schedule.txt | 7 | ||||
| -rw-r--r-- | Documentation/filesystems/ext4.txt | 125 | ||||
| -rw-r--r-- | Documentation/filesystems/gfs2-glocks.txt | 114 | ||||
| -rw-r--r-- | Documentation/filesystems/proc.txt | 29 | ||||
| -rw-r--r-- | Documentation/i2c/busses/i2c-i810 | 47 | ||||
| -rw-r--r-- | Documentation/i2c/busses/i2c-prosavage | 23 | ||||
| -rw-r--r-- | Documentation/i2c/busses/i2c-savage4 | 26 | ||||
| -rw-r--r-- | Documentation/i2c/fault-codes | 127 | ||||
| -rw-r--r-- | Documentation/i2c/smbus-protocol | 4 | ||||
| -rw-r--r-- | Documentation/i2c/writing-clients | 51 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 9 |
18 files changed, 662 insertions, 269 deletions
diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt index 938d7dd0549..b4a615b7840 100644 --- a/Documentation/IRQ-affinity.txt +++ b/Documentation/IRQ-affinity.txt @@ -1,17 +1,26 @@ +ChangeLog: + Started by Ingo Molnar <mingo@redhat.com> + Update by Max Krasnyansky <maxk@qualcomm.com> -SMP IRQ affinity, started by Ingo Molnar <mingo@redhat.com> - +SMP IRQ affinity /proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed to turn off all CPUs, and if an IRQ controller does not support IRQ affinity then the value will not change from the default 0xffffffff. +/proc/irq/default_smp_affinity specifies default affinity mask that applies +to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask +will be set to the default mask. It can then be changed as described above. +Default mask is 0xffffffff. + Here is an example of restricting IRQ44 (eth1) to CPU0-3 then restricting -the IRQ to CPU4-7 (this is an 8-CPU SMP box): +it to CPU4-7 (this is an 8-CPU SMP box): +[root@moon 44]# cd /proc/irq/44 [root@moon 44]# cat smp_affinity ffffffff + [root@moon 44]# echo 0f > smp_affinity [root@moon 44]# cat smp_affinity 0000000f @@ -21,17 +30,27 @@ PING hell (195.4.7.3): 56 data bytes --- hell ping statistics --- 6029 packets transmitted, 6027 packets received, 0% packet loss round-trip min/avg/max = 0.1/0.1/0.4 ms -[root@moon 44]# cat /proc/interrupts | grep 44: - 44: 0 1785 1785 1783 1783 1 -1 0 IO-APIC-level eth1 +[root@moon 44]# cat /proc/interrupts | grep 'CPU\|44:' + CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 + 44: 1068 1785 1785 1783 0 0 0 0 IO-APIC-level eth1 + +As can be seen from the line above IRQ44 was delivered only to the first four +processors (0-3). +Now lets restrict that IRQ to CPU(4-7). + [root@moon 44]# echo f0 > smp_affinity +[root@moon 44]# cat smp_affinity +000000f0 [root@moon 44]# ping -f h PING hell (195.4.7.3): 56 data bytes .. --- hell ping statistics --- 2779 packets transmitted, 2777 packets received, 0% packet loss round-trip min/avg/max = 0.1/0.5/585.4 ms -[root@moon 44]# cat /proc/interrupts | grep 44: - 44: 1068 1785 1785 1784 1784 1069 1070 1069 IO-APIC-level eth1 -[root@moon 44]# +[root@moon 44]# cat /proc/interrupts | 'CPU\|44:' + CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 + 44: 1068 1785 1785 1783 1784 1069 1070 1069 IO-APIC-level eth1 + +This time around IRQ44 was delivered only to the last four processors. +i.e counters for the CPU0-3 did not change. diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index c64158ecde4..a6d32e65d22 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -93,6 +93,9 @@ Since NMI handlers disable preemption, synchronize_sched() is guaranteed not to return until all ongoing NMI handlers exit. It is therefore safe to free up the handler's data as soon as synchronize_sched() returns. +Important note: for this to work, the architecture in question must +invoke irq_enter() and irq_exit() on NMI entry and exit, respectively. + Answer to Quick Quiz diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 39ad8f56783..9f711d2df91 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -52,6 +52,10 @@ of each iteration. Unfortunately, chaotic relaxation requires highly structured data, such as the matrices used in scientific programs, and is thus inapplicable to most data structures in operating-system kernels. +In 1992, Henry (now Alexia) Massalin completed a dissertation advising +parallel programmers to defer processing when feasible to simplify +synchronization. RCU makes extremely heavy use of this advice. + In 1993, Jacobson [Jacobson93] verbally described what is perhaps the simplest deferred-free technique: simply waiting a fixed amount of time before freeing blocks awaiting deferred free. Jacobson did not describe @@ -138,6 +142,13 @@ blocking in read-side critical sections appeared [PaulEMcKenney2006c], Robert Olsson described an RCU-protected trie-hash combination [RobertOlsson2006a]. +2007 saw the journal version of the award-winning RCU paper from 2006 +[ThomasEHart2007a], as well as a paper demonstrating use of Promela +and Spin to mechanically verify an optimization to Oleg Nesterov's +QRCU [PaulEMcKenney2007QRCUspin], a design document describing +preemptible RCU [PaulEMcKenney2007PreemptibleRCU], and the three-part +LWN "What is RCU?" series [PaulEMcKenney2007WhatIsRCUFundamentally, +PaulEMcKenney2008WhatIsRCUUsage, and PaulEMcKenney2008WhatIsRCUAPI]. Bibtex Entries @@ -202,6 +213,20 @@ Bibtex Entries ,Year="1991" } +@phdthesis{HMassalinPhD +,author="H. Massalin" +,title="Synthesis: An Efficient Implementation of Fundamental Operating +System Services" +,school="Columbia University" +,address="New York, NY" +,year="1992" +,annotation=" + Mondo optimizing compiler. + Wait-free stuff. + Good advice: defer work to avoid synchronization. +" +} + @unpublished{Jacobson93 ,author="Van Jacobson" ,title="Avoid Read-Side Locking Via Delayed Free" @@ -635,3 +660,86 @@ Revised: " } +@unpublished{PaulEMcKenney2007PreemptibleRCU +,Author="Paul E. McKenney" +,Title="The design of preemptible read-copy-update" +,month="October" +,day="8" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/253651/} +[Viewed October 25, 2007]" +,annotation=" + LWN article describing the design of preemptible RCU. +" +} + +######################################################################## +# +# "What is RCU?" LWN series. +# + +@unpublished{PaulEMcKenney2007WhatIsRCUFundamentally +,Author="Paul E. McKenney and Jonathan Walpole" +,Title="What is {RCU}, Fundamentally?" +,month="December" +,day="17" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/262464/} +[Viewed December 27, 2007]" +,annotation=" + Lays out the three basic components of RCU: (1) publish-subscribe, + (2) wait for pre-existing readers to complete, and (2) maintain + multiple versions. +" +} + +@unpublished{PaulEMcKenney2008WhatIsRCUUsage +,Author="Paul E. McKenney" +,Title="What is {RCU}? Part 2: Usage" +,month="January" +,day="4" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/263130/} +[Viewed January 4, 2008]" +,annotation=" + Lays out six uses of RCU: + 1. RCU is a Reader-Writer Lock Replacement + 2. RCU is a Restricted Reference-Counting Mechanism + 3. RCU is a Bulk Reference-Counting Mechanism + 4. RCU is a Poor Man's Garbage Collector + 5. RCU is a Way of Providing Existence Guarantees + 6. RCU is a Way of Waiting for Things to Finish +" +} + +@unpublished{PaulEMcKenney2008WhatIsRCUAPI +,Author="Paul E. McKenney" +,Title="{RCU} part 3: the {RCU} {API}" +,month="January" +,day="17" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/264090/} +[Viewed January 10, 2008]" +,annotation=" + Gives an overview of the Linux-kernel RCU API and a brief annotated RCU + bibliography. +" +} + +@article{DinakarGuniguntala2008IBMSysJ +,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole" +,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}" +,Year="2008" +,Month="April" +,journal="IBM Systems Journal" +,volume="47" +,number="2" +,pages="@@-@@" +,annotation=" + RCU, realtime RCU, sleepable RCU, performance. +" +} diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 42b01bc2e1b..cf5562cbe35 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -13,10 +13,13 @@ over a rather long period of time, but improvements are always welcome! detailed performance measurements show that RCU is nonetheless the right tool for the job. - The other exception would be where performance is not an issue, - and RCU provides a simpler implementation. An example of this - situation is the dynamic NMI code in the Linux 2.6 kernel, - at least on architectures where NMIs are rare. + Another exception is where performance is not an issue, and RCU + provides a simpler implementation. An example of this situation + is the dynamic NMI code in the Linux 2.6 kernel, at least on + architectures where NMIs are rare. + + Yet another exception is where the low real-time latency of RCU's + read-side primitives is critically important. 1. Does the update code have proper mutual exclusion? @@ -39,9 +42,10 @@ over a rather long period of time, but improvements are always welcome! 2. Do the RCU read-side critical sections make proper use of rcu_read_lock() and friends? These primitives are needed - to suppress preemption (or bottom halves, in the case of - rcu_read_lock_bh()) in the read-side critical sections, - and are also an excellent aid to readability. + to prevent grace periods from ending prematurely, which + could result in data being unceremoniously freed out from + under your read-side code, which can greatly increase the + actuarial risk of your kernel. As a rough rule of thumb, any dereference of an RCU-protected pointer must be covered by rcu_read_lock() or rcu_read_lock_bh() @@ -54,15 +58,30 @@ over a rather long period of time, but improvements are always welcome! be running while updates are in progress. There are a number of ways to handle this concurrency, depending on the situation: - a. Make updates appear atomic to readers. For example, + a. Use the RCU variants of the list and hlist update + primitives to add, remove, and replace elements on an + RCU-protected list. Alternatively, use the RCU-protected + trees that have been added to the Linux kernel. + + This is almost always the best approach. + + b. Proceed as in (a) above, but also maintain per-element + locks (that are acquired by both readers and writers) + that guard per-element state. Of course, fields that + the readers refrain from accessing can be guarded by the + update-side lock. + + This works quite well, also. + + c. Make updates appear atomic to readers. For example, pointer updates to properly aligned fields will appear atomic, as will individual atomic primitives. Operations performed under a lock and sequences of multiple atomic primitives will -not- appear to be atomic. - This is almost always the best approach. + This can work, but is starting to get a bit tricky. - b. Carefully order the updates and the reads so that + d. Carefully order the updates and the reads so that readers see valid data at all phases of the update. This is often more difficult than it sounds, especially given modern CPUs' tendency to reorder memory references. @@ -123,18 +142,22 @@ over a rather long period of time, but improvements are always welcome! when publicizing a pointer to a structure that can be traversed by an RCU read-side critical section. -5. If call_rcu(), or a related primitive such as call_rcu_bh(), - is used, the callback function must be written to be called - from softirq context. In particular, it cannot block. +5. If call_rcu(), or a related primitive such as call_rcu_bh() or + call_rcu_sched(), is used, the callback function must be + written to be called from softirq context. In particular, + it cannot block. 6. Since synchronize_rcu() can block, it cannot be called from - any sort of irq context. + any sort of irq context. Ditto for synchronize_sched() and + synchronize_srcu(). 7. If the updater uses call_rcu(), then the corresponding readers must use rcu_read_lock() and rcu_read_unlock(). If the updater uses call_rcu_bh(), then the corresponding readers must use - rcu_read_lock_bh() and rcu_read_unlock_bh(). Mixing things up - will result in confusion and broken kernels. + rcu_read_lock_bh() and rcu_read_unlock_bh(). If the updater + uses call_rcu_sched(), then the corresponding readers must + disable preemption. Mixing things up will result in confusion + and broken kernels. One exception to this rule: rcu_read_lock() and rcu_read_unlock() may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh() @@ -143,9 +166,9 @@ over a rather long period of time, but improvements are always welcome! such cases is a must, of course! And the jury is still out on whether the increased speed is worth it. -8. Although synchronize_rcu() is a bit slower than is call_rcu(), - it usually results in simpler code. So, unless update - performance is critically important or the updaters cannot block, +8. Although synchronize_rcu() is slower than is call_rcu(), it + usually results in simpler code. So, unless update performance + is critically important or the updaters cannot block, synchronize_rcu() should be used in preference to call_rcu(). An especially important property of the synchronize_rcu() @@ -187,23 +210,23 @@ over a rather long period of time, but improvements are always welcome! number of updates per grace period. 9. All RCU list-traversal primitives, which include - list_for_each_rcu(), list_for_each_entry_rcu(), + rcu_dereference(), list_for_each_rcu(), list_for_each_entry_rcu(), list_for_each_continue_rcu(), and list_for_each_safe_rcu(), - must be within an RCU read-side critical section. RCU + must be either within an RCU read-side critical section or + must be protected by appropriate update-side locks. RCU read-side critical sections are delimited by rcu_read_lock() and rcu_read_unlock(), or by similar primitives such as rcu_read_lock_bh() and rcu_read_unlock_bh(). - Use of the _rcu() list-traversal primitives outside of an - RCU read-side critical section causes no harm other than - a slight performance degradation on Alpha CPUs. It can - also be quite helpful in reducing code bloat when common - code is shared between readers and updaters. + The reason that it is permissible to use RCU list-traversal + primitives when the update-side lock is held is that doing so + can be quite helpful in reducing code bloat when common code is + shared between readers and updaters. 10. Conversely, if you are in an RCU read-side critical section, - you -must- use the "_rcu()" variants of the list macros. - Failing to do so will break Alpha and confuse people reading - your code. + and you don't hold the appropriate update-side lock, you -must- + use the "_rcu()" variants of the list macros. Failing to do so + will break Alpha and confuse people reading your code. 11. Note that synchronize_rcu() -only- guarantees to wait until all currently executing rcu_read_lock()-protected RCU read-side @@ -230,6 +253,14 @@ over a rather long period of time, but improvements are always welcome! must use whatever locking or other synchronization is required to safely access and/or modify that data structure. + RCU callbacks are -usually- executed on the same CPU that executed + the corresponding call_rcu(), call_rcu_bh(), or call_rcu_sched(), + but are by -no- means guaranteed to be. For example, if a given + CPU goes offline while having an RCU callback pending, then that + RCU callback will execute on some surviving CPU. (If this was + not the case, a self-spawning RCU callback would prevent the + victim CPU from ever going offline.) + 14. SRCU (srcu_read_lock(), srcu_read_unlock(), and synchronize_srcu()) may only be invoked from process context. Unlike other forms of RCU, it -is- permissible to block in an SRCU read-side critical diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index 2967a65269d..a342b6e1cc1 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -10,23 +10,30 @@ status messages via printk(), which can be examined via the dmesg command (perhaps grepping for "torture"). The test is started when the module is loaded, and stops when the module is unloaded. -However, actually setting this config option to "y" results in the system -running the test immediately upon boot, and ending only when the system -is taken down. Normally, one will instead want to build the system -with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control -the test, perhaps using a script similar to the one shown at the end of -this document. Note that you will need CONFIG_MODULE_UNLOAD in order -to be able to end the test. +CONFIG_RCU_TORTURE_TEST_RUNNABLE + +It is also possible to specify CONFIG_RCU_TORTURE_TEST=y, which will +result in the tests being loaded into the base kernel. In this case, +the CONFIG_RCU_TORTURE_TEST_RUNNABLE config option is used to specify +whether the RCU torture tests are to be started immediately during +boot or whether the /proc/sys/kernel/rcutorture_runnable file is used +to enable them. This /proc file can be used to repeatedly pause and +restart the tests, regardless of the initial state specified by the +CONFIG_RCU_TORTURE_TEST_RUNNABLE config option. + +You will normally -not- want to start the RCU torture tests during boot +(and thus the default is CONFIG_RCU_TORTURE_TEST_RUNNABLE=n), but doing +this can sometimes be useful in finding boot-time bugs. MODULE PARAMETERS This module has the following parameters: -nreaders This is the number of RCU reading threads supported. - The default is twice the number of CPUs. Why twice? - To properly exercise RCU implementations with preemptible - read-side critical sections. +irqreaders Says to invoke RCU readers from irq level. This is currently + done via timers. Defaults to "1" for variants of RCU that + permit this. (Or, more accurately, variants of RCU that do + -not- permit this know to ignore this variable.) nfakewriters This is the number of RCU fake writer threads to run. Fake writer threads repeatedly use the synchronous "wait for @@ -37,6 +44,16 @@ nfakewriters This is the number of RCU fake writer threads to run. Fake to trigger special cases caused by multiple writers, such as the synchronize_srcu() early return optimization. +nreaders This is the number of RCU reading threads supported. + The default is twice the number of CPUs. Why twice? + To properly exercise RCU implementations with preemptible + read-side critical sections. + +shuffle_interval + The number of seconds to keep the test threads affinitied + to a particular subset of the CPUs, defaults to 3 seconds. + Used in conjunction with test_no_idle_hz. + stat_interval The number of seconds between output of torture statistics (via printk()). Regardless of the interval, statistics are printed when the module is unloaded. @@ -44,10 +61,11 @@ stat_interval The number of seconds between output of torture be printed -only- when the module is unloaded, and this is the default. -shuffle_interval - The number of seconds to keep the test threads affinitied - to a particular subset of the CPUs, defaults to 5 seconds. - Used in conjunction with test_no_idle_hz. +stutter The length of time to run the test before pausing for this + same period of time. Defaults to "stutter=5", so as + to run and pause for (roughly) five-second intervals. + Specifying "stutter=0" causes the test to run continuously + without pausing, which is the old default behavior. test_no_idle_hz Whether or not to test the ability of RCU to operate in a kernel that disables the scheduling-clock interrupt to diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index e0d6d99b8f9..e04d643a9f5 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -1,3 +1,11 @@ +Please note that the "What is RCU?" LWN series is an excellent place +to start learning about RCU: + +1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/ +2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ +3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ + + What is RCU? RCU is a synchronization mechanism that was added to the Linux kernel @@ -772,26 +780,18 @@ Linux-kernel source code, but it helps to have a full list of the APIs, since there does not appear to be a way to categorize them in docbook. Here is the list, by category. -Markers for RCU read-side critical sections: - - rcu_read_lock - rcu_read_unlock - rcu_read_lock_bh - rcu_read_unlock_bh - srcu_read_lock - srcu_read_unlock - RCU pointer/list traversal: rcu_dereference + list_for_each_entry_rcu + hlist_for_each_entry_rcu + list_for_each_rcu (to be deprecated in favor of list_for_each_entry_rcu) - list_for_each_entry_rcu list_for_each_continue_rcu (to be deprecated in favor of new list_for_each_entry_continue_rcu) - hlist_for_each_entry_rcu -RCU pointer update: +RCU pointer/list update: rcu_assign_pointer list_add_rcu @@ -799,16 +799,36 @@ RCU pointer update: list_del_rcu list_replace_rcu hlist_del_rcu + hlist_add_after_rcu + hlist_add_before_rcu hlist_add_head_rcu + hlist_replace_rcu + list_splice_init_rcu() -RCU grace period: +RCU: Critical sections Grace period Barrier + + rcu_read_lock synchronize_net rcu_barrier + rcu_read_unlock synchronize_rcu + call_rcu + + +bh: Critical sections Grace period Barrier + + rcu_read_lock_bh call_rcu_bh rcu_barrier_bh + rcu_read_unlock_bh + + +sched: Critical sections Grace period Barrier + + [preempt_disable] synchronize_sched rcu_barrier_sched + [and friends] call_rcu_sched + + +SRCU: Critical sections Grace period Barrier + + srcu_read_lock synchronize_srcu N/A + srcu_read_unlock - synchronize_net - synchronize_sched - synchronize_rcu - synchronize_srcu - call_rcu - call_rcu_bh See the comment headers in the source code (or the docbook generated from them) for more information. diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index b61cb956402..bd699da2466 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -14,9 +14,8 @@ represent the thread siblings to cpu X in the same physical package; To implement it in an architecture-neutral way, a new source file, drivers/base/topology.c, is to export the 4 attributes. -If one architecture wants to support this feature, it just needs to -implement 4 defines, typically in file include/asm-XXX/topology.h. -The 4 defines are: +For an architecture to support this feature, it must define some of +these macros in include/asm-XXX/topology.h: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) #define topology_thread_siblings(cpu) @@ -25,17 +24,10 @@ The 4 defines are: The type of **_id is int. The type of siblings is cpumask_t. -To be consistent on all architectures, the 4 attributes should have -default values if their values are unavailable. Below is the rule. -1) physical_package_id: If cpu has no physical package id, -1 is the -default value. -2) core_id: If cpu doesn't support multi-core, its core id is 0. -3) thread_siblings: Just include itself, if the cpu doesn't support -HT/multi-thread. -4) core_siblings: Just include itself, if the cpu doesn't support -multi-core and HT/Multi-thread. - -So be careful when declaring the 4 defines in include/asm-XXX/topology.h. - -If an attribute isn't defined on an architecture, it won't be exported. - +To be consistent on all architectures, include/linux/topology.h +provides default definitions for any of the above macros that are +not defined by include/asm-XXX/topology.h: +1) physical_package_id: -1 +2) core_id: 0 +3) thread_siblings: just the given CPU +4) core_siblings: just the given CPU diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 46ece3fba6f..65a1482457a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -222,13 +222,6 @@ Who: Thomas Gleixner <tglx@linutronix.de> --------------------------- -What: i2c-i810, i2c-prosavage and i2c-savage4 -When: May 2008 -Why: These drivers are superseded by i810fb, intelfb and savagefb. -Who: Jean Delvare <khali@linux-fr.org> - ---------------------------- - What (Why): - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files (superseded by xt_TOS/xt_tos target & match) diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 0c5086db835..80e193d82e2 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -13,72 +13,93 @@ Mailing list: linux-ext4@vger.kernel.org 1. Quick usage instructions: =========================== - - Grab updated e2fsprogs from - ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs-interim/ - This is a patchset on top of e2fsprogs-1.39, which can be found at + - Compile and install the latest version of e2fsprogs (as of this + writing version 1.41) from: + + http://sourceforge.net/project/showfiles.php?group_id=2406 + + or + ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/ - - It's still mke2fs -j /dev/hda1 + or grab the latest git repository from: + + git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git + + - Create a new filesystem using the ext4dev filesystem type: + + # mke2fs -t ext4dev /dev/hda1 + + Or configure an existing ext3 filesystem to support extents and set + the test_fs flag to indicate that it's ok for an in-development + filesystem to touch this filesystem: - - mount /dev/hda1 /wherever -t ext4dev + # tune2fs -O extents -E test_fs /dev/hda1 - - To enable extents, + If the filesystem was created with 128 byte inodes, it can be + converted to use 256 byte for greater efficiency via: - mount /dev/hda1 /wherever -t ext4dev -o extents + # tune2fs -I 256 /dev/hda1 - - The filesystem is compatible with the ext3 driver until you add a file - which has extents (ie: `mount -o extents', then create a file). + (Note: we currently do not have tools to convert an ext4dev + filesystem back to ext3; so please do not do try this on production + filesystems.) - NOTE: The "extents" mount flag is temporary. It will soon go away and - extents will be enabled by the "-o extents" flag to mke2fs or tune2fs + - Mounting: + + # mount -t ext4dev /dev/hda1 /wherever - When comparing performance with other filesystems, remember that - ext3/4 by default offers higher data integrity guarantees than most. So - when comparing with a metadata-only journalling filesystem, use `mount -o - data=writeback'. And you might as well use `mount -o nobh' too along - with it. Making the journal larger than the mke2fs default often helps - performance with metadata-intensive workloads. + ext3/4 by default offers higher data integrity guarantees than most. + So when comparing with a metadata-only journalling filesystem, such + as ext3, use `mount -o data=writeback'. And you might as well use + `mount -o nobh' too along with it. Making the journal larger than + the mke2fs default often helps performance with metadata-intensive + workloads. 2. Features =========== 2.1 Currently available -* ability to use filesystems > 16TB +* ability to use filesystems > 16TB (e2fsprogs support not available yet) * extent format reduces metadata overhead (RAM, IO for access, transactions) * extent format more robust in face of on-disk corruption due to magics, * internal redunancy in tree - -2.1 Previously available, soon to be enabled by default by "mkefs.ext4": - -* dir_index and resize inode will be on by default -* large inodes will be used by default for fast EAs, nsec timestamps, etc +* improved file allocation (multi-block alloc) +* fix 32000 subdirectory limit +* nsec timestamps for mtime, atime, ctime, create time +* inode version field on disk (NFSv4, Lustre) +* reduced e2fsck time via uninit_bg feature +* journal checksumming for robustness, performance +* persistent file preallocation (e.g for streaming media, databases) +* ability to pack bitmaps and inode tables into larger virtual groups via the + flex_bg feature +* large file support +* Inode allocation using large virtual block groups via flex_bg +* delayed allocation +* large block (up to pagesize) support +* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force + the ordering) 2.2 Candidate features for future inclusion -There are several under discussion, whether they all make it in is -partly a function of how much time everyone has to work on them: +* Online defrag (patches available but not well tested) +* reduced mke2fs time via lazy itable initialization in conjuction with + the uninit_bg feature (capability to do this is available in e2fsprogs + but a kernel thread to do lazy zeroing of unused inode table blocks + after filesystem is first mounted is required for safety) -* improved file allocation (multi-block alloc, delayed alloc; basically done) -* fix 32000 subdirectory limit (patch exists, needs some e2fsck work) -* nsec timestamps for mtime, atime, ctime, create time (patch exists, - needs some e2fsck work) -* inode version field on disk (NFSv4, Lustre; prototype exists) -* reduced mke2fs/e2fsck time via uninitialized groups (prototype exists) -* journal checksumming for robustness, performance (prototype exists) -* persistent file preallocation (e.g for streaming media, databases) +There are several others under discussion, whether they all make it in is +partly a function of how much time everyone has to work on them. Features like +metadata checksumming have been discussed and planned for a bit but no patches +exist yet so I'm not sure they're in the near-term roadmap. -Features like metadata checksumming have been discussed and planned for -a bit but no patches exist yet so I'm not sure they're in the near-term -roadmap. +The big performance win will come with mballoc, delalloc and flex_bg +grouping of bitmaps and inode tables. Some test results available here: -The big performance win will come with mballoc and delalloc. CFS has -been using mballoc for a few years already with Lustre, and IBM + Bull -did a lot of benchmarking on it. The reason it isn't in the first set of -patches is partly a manageability issue, and partly because it doesn't -directly affect the on-disk format (outside of much better allocation) -so it isn't critical to get into the first round of changes. I believe -Alex is working on a new set of patches right now. + - http://www.bullopensource.org/ext4/20080530/ffsb-write-2.6.26-rc2.html + - http://www.bullopensource.org/ext4/20080530/ffsb-readwrite-2.6.26-rc2.html 3. Options ========== @@ -222,9 +243,11 @@ stripe=n Number of filesystem blocks that mballoc will try to use for allocation size and alignment. For RAID5/6 systems this should be the number of data disks * RAID chunk size in file system blocks. - +delalloc (*) Deferring block allocation until write-out time. +nodelalloc Disable delayed allocation. Blocks are allocation + when data is copied from user to page cache. Data Mode ---------- +========= There are 3 different data modes: * writeback mode @@ -236,10 +259,10 @@ typically provide the best ext4 performance. * ordered mode In data=ordered mode, ext4 only officially journals metadata, but it logically -groups metadata and data blocks into a single unit called a transaction. When -it's time to write the new metadata out to disk, the associated data blocks -are written first. In general, this mode performs slightly slower than -writeback but significantly faster than journal mode. +groups metadata information related to data changes with the data blocks into a +single unit called a transaction. When it's time to write the new metadata +out to disk, the associated data blocks are written first. In general, +this mode performs slightly slower than writeback but significantly faster than journal mode. * journal mode data=journal mode provides full data and metadata journaling. All new data is @@ -247,7 +270,8 @@ written to the journal first, and then to its final location. In the event of a crash, the journal can be replayed, bringing both data and metadata into a consistent state. This mode is the slowest except when data needs to be read from and written to disk at the same time where it -outperforms all others modes. +outperforms all others modes. Curently ext4 does not have delayed +allocation support if this data journalling mode is selected. References ========== @@ -256,7 +280,8 @@ kernel source: <file:fs/ext4/> <file:fs/jbd2/> programs: http://e2fsprogs.sourceforge.net/ - http://ext2resize.sourceforge.net useful links: http://fedoraproject.org/wiki/ext3-devel http://www.bullopensource.org/ext4/ + http://ext4.wiki.kernel.org/index.php/Main_Page + http://fedoraproject.org/wiki/Features/Ext4 diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt new file mode 100644 index 00000000000..4dae9a3840b --- /dev/null +++ b/Documentation/filesystems/gfs2-glocks.txt @@ -0,0 +1,114 @@ + Glock internal locking rules + ------------------------------ + +This documents the basic principles of the glock state machine +internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h) +has two main (internal) locks: + + 1. A spinlock (gl_spin) which protects the internal state such + as gl_state, gl_target and the list of holders (gl_holders) + 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other + threads from making calls to the DLM, etc. at the same time. If a + thread takes this lock, it must then call run_queue (usually via the + workqueue) when it releases it in order to ensure any pending tasks + are completed. + +The gl_holders list contains all the queued lock requests (not +just the holders) associated with the glock. If there are any +held locks, then they will be contiguous entries at the head +of the list. Locks are granted in strictly the order that they +are queued, except for those marked LM_FLAG_PRIORITY which are +used only during recovery, and even then only for journal locks. + +There are three lock states that users of the glock layer can request, +namely shared (SH), deferred (DF) and exclusive (EX). Those translate +to the following DLM lock modes: + +Glock mode | DLM lock mode +------------------------------ + UN | IV/NL Unlocked (no DLM lock associated with glock) or NL + SH | PR (Protected read) + DF | CW (Concurrent write) + EX | EX (Exclusive) + +Thus DF is basically a shared mode which is incompatible with the "normal" +shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O +operations. The glocks are basically a lock plus some routines which deal +with cache management. The following rules apply for the cache: + +Glock mode | Cache data | Cache Metadata | Dirty Data | Dirty Metadata +-------------------------------------------------------------------------- + UN | No | No | No | No + SH | Yes | Yes | No | No + DF | No | Yes | No | No + EX | Yes | Yes | Yes | Yes + +These rules are implemented using the various glock operations which +are defined for each type of glock. Not all types of glocks use +all the modes. Only inode glocks use the DF mode for example. + +Table of glock operations and per type constants: + +Field | Purpose +---------------------------------------------------------------------------- +go_xmote_th | Called before remote state change (e.g. to sync dirty data) +go_xmote_bh | Called after remote state change (e.g. to refill cache) +go_inval | Called if remote state change requires invalidating the cache +go_demote_ok | Returns boolean value of whether its ok to demote a glock + | (e.g. checks timeout, and that there is no cached data) +go_lock | Called for the first local holder of a lock +go_unlock | Called on the final local unlock of a lock +go_dump | Called to print content of object for debugfs file, or on + | error to dump glock to the log. +go_type; | The type of the glock, LM_TYPE_..... +go_min_hold_time | The minimum hold time + +The minimum hold time for each lock is the time after a remote lock +grant for which we ignore remote demote requests. This is in order to +prevent a situation where locks are being bounced around the cluster +from node to node with none of the nodes making any progress. This +tends to show up most with shared mmaped files which are being written +to by multiple nodes. By delaying the demotion in response to a +remote callback, that gives the userspace program time to make +some progress before the pages are unmapped. + +There is a plan to try and remove the go_lock and go_unlock callbacks +if possible, in order to try and speed up the fast path though the locking. +Also, eventually we hope to make the glock "EX" mode locally shared +such that any local locking will be done with the i_mutex as required +rather than via the glock. + +Locking rules for glock operations: + +Operation | GLF_LOCK bit lock held | gl_spin spinlock held +----------------------------------------------------------------- +go_xmote_th | Yes | No +go_xmote_bh | Yes | No +go_inval | Yes | No +go_demote_ok | Sometimes | Yes +go_lock | Yes | No +go_unlock | Yes | No +go_dump | Sometimes | Yes + +N.B. Operations must not drop either the bit lock or the spinlock +if its held on entry. go_dump and do_demote_ok must never block. +Note that go_dump will only be called if the glock's state +indicates that it is caching uptodate data. + +Glock locking order within GFS2: + + 1. i_mutex (if required) + 2. Rename glock (for rename only) + 3. Inode glock(s) + (Parents before children, inodes at "same level" with same parent in + lock number order) + 4. Rgrp glock(s) (for (de)allocation operations) + 5. Transaction glock (via gfs2_trans_begin) for non-read operations + 6. Page lock (always last, very important!) + +There are two glocks per inode. One deals with access to the inode +itself (locking order as above), and the other, known as the iopen +glock is used in conjunction with the i_nlink field in the inode to +determine the lifetime of the inode in question. Locking of inodes +is on a per-inode basis. Locking of rgrps is on a per rgrp basis. + diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index dbc3c6a3650..7f268f327d7 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -380,28 +380,35 @@ i386 and x86_64 platforms support the new IRQ vector displays. Of some interest is the introduction of the /proc/irq directory to 2.4. It could be used to set IRQ to CPU affinity, this means that you can "hook" an IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the -irq subdir is one subdir for each IRQ, and one file; prof_cpu_mask +irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and +prof_cpu_mask. For example > ls /proc/irq/ 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask - 1 11 13 15 17 19 3 5 7 9 + 1 11 13 15 17 19 3 5 7 9 default_smp_affinity > ls /proc/irq/0/ smp_affinity -The contents of the prof_cpu_mask file and each smp_affinity file for each IRQ -is the same by default: +smp_affinity is a bitmask, in which you can specify which CPUs can handle the +IRQ, you can set it by doing: - > cat /proc/irq/0/smp_affinity - ffffffff + > echo 1 > /proc/irq/10/smp_affinity + +This means that only the first CPU will handle the IRQ, but you can also echo +5 which means that only the first and fourth CPU can handle the IRQ. -It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can -set it by doing: +The contents of each smp_affinity file is the same by default: + + > cat /proc/irq/0/smp_affinity + ffffffff - > echo 1 > /proc/irq/prof_cpu_mask +The default_smp_affinity mask applies to all non-active IRQs, which are the +IRQs which have not yet been allocated/activated, and hence which lack a +/proc/irq/[0-9]* directory. -This means that only the first CPU will handle the IRQ, but you can also echo 5 -which means that only the first and fourth CPU can handle the IRQ. +prof_cpu_mask specifies which CPUs are to be profiled by the system wide +profiler. Default value is ffffffff (all cpus). The way IRQs are routed is handled by the IO-APIC, and it's Round Robin between all the CPUs which are allowed to handle it. As usual the kernel has diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 deleted file mode 100644 index 778210ee158..00000000000 --- a/Documentation/i2c/busses/i2c-i810 +++ /dev/null @@ -1,47 +0,0 @@ -Kernel driver i2c-i810 - -Supported adapters: - * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH) - * Intel 82845G (GMCH) - -Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, - Ralph Metzler <rjkm@thp.uni-koeln.de>, - Mark D. Studebaker <mdsxyz123@yahoo.com> - -Main contact: Mark Studebaker <mdsxyz123@yahoo.com> - -Description ------------ - -WARNING: If you have an '810' or '815' motherboard, your standard I2C -temperature sensors are most likely on the 801's I2C bus. You want the -i2c-i801 driver for those, not this driver. - -Now for the i2c-i810... - -The GMCH chip contains two I2C interfaces. - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . - -The second interface is a general-purpose I2C bus. It may be connected to a -TV-out chip such as the BT869 or possibly to a digital flat-panel display. - -Features --------- - -Both busses use the i2c-algo-bit driver for 'bit banging' -and support for specific transactions is provided by i2c-algo-bit. - -Issues ------- - -If you enable bus testing in i2c-algo-bit (insmod i2c-algo-bit bit_test=1), -the test may fail; if so, the i2c-i810 driver won't be inserted. However, -we think this has been fixed. diff --git a/Documentation/i2c/busses/i2c-prosavage b/Documentation/i2c/busses/i2c-prosavage deleted file mode 100644 index 70368790251..00000000000 --- a/Documentation/i2c/busses/i2c-prosavage +++ /dev/null @@ -1,23 +0,0 @@ -Kernel driver i2c-prosavage - -Supported adapters: - - S3/VIA KM266/VT8375 aka ProSavage8 - S3/VIA KM133/VT8365 aka Savage4 - -Author: Henk Vergonet <henk@god.dyndns.org> - -Description ------------ - -The Savage4 chips contain two I2C interfaces (aka a I2C 'master' or -'host'). - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . The second interface is a general-purpose I2C bus. - -Usefull for gaining access to the TV Encoder chips. - diff --git a/Documentation/i2c/busses/i2c-savage4 b/Documentation/i2c/busses/i2c-savage4 deleted file mode 100644 index 6ecceab618d..00000000000 --- a/Documentation/i2c/busses/i2c-savage4 +++ /dev/null @@ -1,26 +0,0 @@ -Kernel driver i2c-savage4 - -Supported adapters: - * Savage4 - * Savage2000 - -Authors: - Alexander Wold <awold@bigfoot.com>, - Mark D. Studebaker <mdsxyz123@yahoo.com> - -Description ------------ - -The Savage4 chips contain two I2C interfaces (aka a I2C 'master' -or 'host'). - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . The DDC bus is not yet supported because its register -is not directly memory-mapped. - -The second interface is a general-purpose I2C bus. This is the only -interface supported by the driver at the moment. - diff --git a/Documentation/i2c/fault-codes b/Documentation/i2c/fault-codes new file mode 100644 index 00000000000..045765c0b9b --- /dev/null +++ b/Documentation/i2c/fault-codes @@ -0,0 +1,127 @@ +This is a summary of the most important conventions for use of fault +codes in the I2C/SMBus stack. + + +A "Fault" is not always an "Error" +---------------------------------- +Not all fault reports imply errors; "page faults" should be a familiar +example. Software often retries idempotent operations after transient +faults. There may be fancier recovery schemes that are appropriate in +some cases, such as re-initializing (and maybe resetting). After such +recovery, triggered by a fault report, there is no error. + +In a similar way, sometimes a "fault" code just reports one defined +result for an operation ... it doesn't indicate that anything is wrong +at all, just that the outcome wasn't on the "golden path". + +In short, your I2C driver code may need to know these codes in order +to respond correctly. Other code may need to rely on YOUR code reporting +the right fault code, so that it can (in turn) behave correctly. + + +I2C and SMBus fault codes +------------------------- +These are returned as negative numbers from most calls, with zero or +some positive number indicating a non-fault return. The specific +numbers associated with these symbols differ between architectures, +though most Linux systems use <asm-generic/errno*.h> numbering. + +Note that the descriptions here are not exhaustive. There are other +codes that may be returned, and other cases where these codes should +be returned. However, drivers should not return other codes for these +cases (unless the hardware doesn't provide unique fault reports). + +Also, codes returned by adapter probe methods follow rules which are +specific to their host bus (such as PCI, or the platform bus). + + +EAGAIN + Returned by I2C adapters when they lose arbitration in master + transmit mode: some other master was transmitting different + data at the same time. + + Also returned when trying to invoke an I2C operation in an + atomic context, when some task is already using that I2C bus + to execute some other operation. + +EBADMSG + Returned by SMBus logic when an invalid Packet Error Code byte + is received. This code is a CRC covering all bytes in the + transaction, and is sent before the terminating STOP. This + fault is only reported on read transactions; the SMBus slave + may have a way to report PEC mismatches on writes from the + host. Note that even if PECs are in use, you should not rely + on these as the only way to detect incorrect data transfers. + +EBUSY + Returned by SMBus adapters when the bus was busy for longer + than allowed. This usually indicates some device (maybe the + SMBus adapter) needs some fault recovery (such as resetting), + or that the reset was attempted but failed. + +EINVAL + This rather vague error means an invalid parameter has been + detected before any I/O operation was started. Use a more + specific fault code when you can. + + One example would be a driver trying an SMBus Block Write + with block size outside the range of 1-32 bytes. + +EIO + This rather vague error means something went wrong when + performing an I/O operation. Use a more specific fault + code when you can. + +ENODEV + Returned by driver probe() methods. This is a bit more + specific than ENXIO, implying the problem isn't with the + address, but with the device found there. Driver probes + may verify the device returns *correct* responses, and + return this as appropriate. (The driver core will warn + about probe faults other than ENXIO and ENODEV.) + +ENOMEM + Returned by any component that can't allocate memory when + it needs to do so. + +ENXIO + Returned by I2C adapters to indicate that the address phase + of a transfer didn't get an ACK. While it might just mean + an I2C device was temporarily not responding, usually it + means there's nothing listening at that address. + + Returned by driver probe() methods to indicate that they + found no device to bind to. (ENODEV may also be used.) + +EOPNOTSUPP + Returned by an adapter when asked to perform an operation + that it doesn't, or can't, support. + + For example, this would be returned when an adapter that + doesn't support SMBus block transfers is asked to execute + one. In that case, the driver making that request should + have verified that functionality was supported before it + made that block transfer request. + + Similarly, if an I2C adapter can't execute all legal I2C + messages, it should return this when asked to perform a + transaction it can't. (These limitations can't be seen in + the adapter's functionality mask, since the assumption is + that if an adapter supports I2C it supports all of I2C.) + +EPROTO + Returned when slave does not conform to the relevant I2C + or SMBus (or chip-specific) protocol specifications. One + case is when the length of an SMBus block data response + (from the SMBus slave) is outside the range 1-32 bytes. + +ETIMEDOUT + This is returned by drivers when an operation took too much + time, and was aborted before it completed. + + SMBus adapters may return it when an operation took more + time than allowed by the SMBus specification; for example, + when a slave stretches clocks too far. I2C has no such + timeouts, but it's normal for I2C adapters to impose some + arbitrary limits (much longer than SMBus!) too. + diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 03f08fb491c..24bfb65da17 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -42,8 +42,8 @@ Count (8 bits): A data byte containing the length of a block operation. [..]: Data sent by I2C device, as opposed to data sent by the host adapter. -SMBus Quick Command: i2c_smbus_write_quick() -============================================= +SMBus Quick Command +=================== This sends a single bit to the device, at the place of the Rd/Wr bit. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index d4cd4126d1a..6b61b3a2e90 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -44,6 +44,10 @@ static struct i2c_driver foo_driver = { .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, + /* if device autodetection is needed: */ + .class = I2C_CLASS_SOMETHING, + .detect = foo_detect, + .address_data = &addr_data, /* else, driver uses "legacy" binding model: */ .attach_adapter = foo_attach_adapter, @@ -217,6 +221,31 @@ in the I2C bus driver. You may want to save the returned i2c_client reference for later use. +Device Detection (Standard driver model) +---------------------------------------- + +Sometimes you do not know in advance which I2C devices are connected to +a given I2C bus. This is for example the case of hardware monitoring +devices on a PC's SMBus. In that case, you may want to let your driver +detect supported devices automatically. This is how the legacy model +was working, and is now available as an extension to the standard +driver model (so that we can finally get rid of the legacy model.) + +You simply have to define a detect callback which will attempt to +identify supported devices (returning 0 for supported ones and -ENODEV +for unsupported ones), a list of addresses to probe, and a device type +(or class) so that only I2C buses which may have that type of device +connected (and not otherwise enumerated) will be probed. The i2c +core will then call you back as needed and will instantiate a device +for you for every successful detection. + +Note that this mechanism is purely optional and not suitable for all +devices. You need some reliable way to identify the supported devices +(typically using device-specific, dedicated identification registers), +otherwise misdetections are likely to occur and things can get wrong +quickly. + + Device Deletion (Standard driver model) --------------------------------------- @@ -569,7 +598,6 @@ SMBus communication in terms of it. Never use this function directly! - extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); @@ -578,30 +606,31 @@ SMBus communication extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_word_data(struct i2c_client * client, u8 command, u16 value); + extern s32 i2c_smbus_read_block_data(struct i2c_client * client, + u8 command, u8 *values); extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); - -These ones were removed in Linux 2.6.10 because they had no users, but could -be added back later if needed: - - extern s32 i2c_smbus_read_block_data(struct i2c_client * client, - u8 command, u8 *values); extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); + +These ones were removed from i2c-core because they had no users, but could +be added back later if needed: + + extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_process_call(struct i2c_client * client, u8 command, u16 value); extern s32 i2c_smbus_block_process_call(struct i2c_client *client, u8 command, u8 length, u8 *values) -All these transactions return -1 on failure. The 'write' transactions -return 0 on success; the 'read' transactions return the read value, except -for read_block, which returns the number of values read. The block buffers -need not be longer than 32 bytes. +All these transactions return a negative errno value on failure. The 'write' +transactions return 0 on success; the 'read' transactions return the read +value, except for block transactions, which return the number of values +read. The block buffers need not be longer than 32 bytes. You can read the file `smbus-protocol' for more information about the actual SMBus protocol. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b3a5aad7e62..312fe77764a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -571,6 +571,8 @@ and is between 256 and 4096 characters. It is defined in the file debug_objects [KNL] Enable object debugging + debugpat [X86] Enable PAT debugging + decnet.addr= [HW,NET] Format: <area>[,<node>] See also Documentation/networking/decnet.txt. @@ -756,9 +758,6 @@ and is between 256 and 4096 characters. It is defined in the file hd= [EIDE] (E)IDE hard drive subsystem geometry Format: <cyl>,<head>,<sect> - hd?= [HW] (E)IDE subsystem - hd?lun= See Documentation/ide/ide.txt. - highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -1610,6 +1609,10 @@ and is between 256 and 4096 characters. It is defined in the file Format: { parport<nr> | timid | 0 } See also Documentation/parport.txt. + pmtmr= [X86] Manual setup of pmtmr I/O Port. + Override pmtimer IOPort with a hex value. + e.g. pmtmr=0x508 + pnpacpi= [ACPI] { off } |