aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/console/console.txt144
-rw-r--r--Documentation/fb/fbcon.txt180
-rw-r--r--Documentation/filesystems/ext3.txt8
-rw-r--r--Documentation/kbuild/makefiles.txt8
-rw-r--r--Documentation/kernel-parameters.txt19
-rw-r--r--Documentation/keys.txt43
-rw-r--r--Documentation/md.txt67
-rw-r--r--Documentation/tty.txt7
-rw-r--r--Documentation/x86_64/boot-options.txt21
9 files changed, 467 insertions, 30 deletions
diff --git a/Documentation/console/console.txt b/Documentation/console/console.txt
new file mode 100644
index 00000000000..d3e17447321
--- /dev/null
+++ b/Documentation/console/console.txt
@@ -0,0 +1,144 @@
+Console Drivers
+===============
+
+The linux kernel has 2 general types of console drivers. The first type is
+assigned by the kernel to all the virtual consoles during the boot process.
+This type will be called 'system driver', and only one system driver is allowed
+to exist. The system driver is persistent and it can never be unloaded, though
+it may become inactive.
+
+The second type has to be explicitly loaded and unloaded. This will be called
+'modular driver' by this document. Multiple modular drivers can coexist at
+any time with each driver sharing the console with other drivers including
+the system driver. However, modular drivers cannot take over the console
+that is currently occupied by another modular driver. (Exception: Drivers that
+call take_over_console() will succeed in the takeover regardless of the type
+of driver occupying the consoles.) They can only take over the console that is
+occupied by the system driver. In the same token, if the modular driver is
+released by the console, the system driver will take over.
+
+Modular drivers, from the programmer's point of view, has to call:
+
+ take_over_console() - load and bind driver to console layer
+ give_up_console() - unbind and unload driver
+
+In newer kernels, the following are also available:
+
+ register_con_driver()
+ unregister_con_driver()
+
+If sysfs is enabled, the contents of /sys/class/vtconsole can be
+examined. This shows the console backends currently registered by the
+system which are named vtcon<n> where <n> is an integer fro 0 to 15. Thus:
+
+ ls /sys/class/vtconsole
+ . .. vtcon0 vtcon1
+
+Each directory in /sys/class/vtconsole has 3 files:
+
+ ls /sys/class/vtconsole/vtcon0
+ . .. bind name uevent
+
+What do these files signify?
+
+ 1. bind - this is a read/write file. It shows the status of the driver if
+ read, or acts to bind or unbind the driver to the virtual consoles
+ when written to. The possible values are:
+
+ 0 - means the driver is not bound and if echo'ed, commands the driver
+ to unbind
+
+ 1 - means the driver is bound and if echo'ed, commands the driver to
+ bind
+
+ 2. name - read-only file. Shows the name of the driver in this format:
+
+ cat /sys/class/vtconsole/vtcon0/name
+ (S) VGA+
+
+ '(S)' stands for a (S)ystem driver, ie, it cannot be directly
+ commanded to bind or unbind
+
+ 'VGA+' is the name of the driver
+
+ cat /sys/class/vtconsole/vtcon1/name
+ (M) frame buffer device
+
+ In this case, '(M)' stands for a (M)odular driver, one that can be
+ directly commanded to bind or unbind.
+
+ 3. uevent - ignore this file
+
+When unbinding, the modular driver is detached first, and then the system
+driver takes over the consoles vacated by the driver. Binding, on the other
+hand, will bind the driver to the consoles that are currently occupied by a
+system driver.
+
+NOTE1: Binding and binding must be selected in Kconfig. It's under:
+
+Device Drivers -> Character devices -> Support for binding and unbinding
+console drivers
+
+NOTE2: If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
+unbinding will not succeed. An example of an application that sets the console
+to KD_GRAPHICS is X.
+
+How useful is this feature? This is very useful for console driver
+developers. By unbinding the driver from the console layer, one can unload the
+driver, make changes, recompile, reload and rebind the driver without any need
+for rebooting the kernel. For regular users who may want to switch from
+framebuffer console to VGA console and vice versa, this feature also makes
+this possible. (NOTE NOTE NOTE: Please read fbcon.txt under Documentation/fb
+for more details).
+
+Notes for developers:
+=====================
+
+take_over_console() is now broken up into:
+
+ register_con_driver()
+ bind_con_driver() - private function
+
+give_up_console() is a wrapper to unregister_con_driver(), and a driver must
+be fully unbound for this call to succeed. con_is_bound() will check if the
+driver is bound or not.
+
+Guidelines for console driver writers:
+=====================================
+
+In order for binding to and unbinding from the console to properly work,
+console drivers must follow these guidelines:
+
+1. All drivers, except system drivers, must call either register_con_driver()
+ or take_over_console(). register_con_driver() will just add the driver to
+ the console's internal list. It won't take over the
+ console. take_over_console(), as it name implies, will also take over (or
+ bind to) the console.
+
+2. All resources allocated during con->con_init() must be released in
+ con->con_deinit().
+
+3. All resources allocated in con->con_startup() must be released when the
+ driver, which was previously bound, becomes unbound. The console layer
+ does not have a complementary call to con->con_startup() so it's up to the
+ driver to check when it's legal to release these resources. Calling
+ con_is_bound() in con->con_deinit() will help. If the call returned
+ false(), then it's safe to release the resources. This balance has to be
+ ensured because con->con_startup() can be called again when a request to
+ rebind the driver to the console arrives.
+
+4. Upon exit of the driver, ensure that the driver is totally unbound. If the
+ condition is satisfied, then the driver must call unregister_con_driver()
+ or give_up_console().
+
+5. unregister_con_driver() can also be called on conditions which make it
+ impossible for the driver to service console requests. This can happen
+ with the framebuffer console that suddenly lost all of its drivers.
+
+The current crop of console drivers should still work correctly, but binding
+and unbinding them may cause problems. With minimal fixes, these drivers can
+be made to work correctly.
+
+==========================
+Antonino Daplas <adaplas@pol.net>
+
diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt
index 08dce0f631b..f373df12ed4 100644
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@@ -135,10 +135,10 @@ C. Boot options
The angle can be changed anytime afterwards by 'echoing' the same
numbers to any one of the 2 attributes found in
- /sys/class/graphics/fb{x}
+ /sys/class/graphics/fbcon
- con_rotate - rotate the display of the active console
- con_rotate_all - rotate the display of all consoles
+ rotate - rotate the display of the active console
+ rotate_all - rotate the display of all consoles
Console rotation will only become available if Console Rotation
Support is compiled in your kernel.
@@ -148,5 +148,177 @@ C. Boot options
Actually, the underlying fb driver is totally ignorant of console
rotation.
----
+C. Attaching, Detaching and Unloading
+
+Before going on on how to attach, detach and unload the framebuffer console, an
+illustration of the dependencies may help.
+
+The console layer, as with most subsystems, needs a driver that interfaces with
+the hardware. Thus, in a VGA console:
+
+console ---> VGA driver ---> hardware.
+
+Assuming the VGA driver can be unloaded, one must first unbind the VGA driver
+from the console layer before unloading the driver. The VGA driver cannot be
+unloaded if it is still bound to the console layer. (See
+Documentation/console/console.txt for more information).
+
+This is more complicated in the case of the the framebuffer console (fbcon),
+because fbcon is an intermediate layer between the console and the drivers:
+
+console ---> fbcon ---> fbdev drivers ---> hardware
+
+The fbdev drivers cannot be unloaded if it's bound to fbcon, and fbcon cannot
+be unloaded if it's bound to the console layer.
+
+So to unload the fbdev drivers, one must first unbind fbcon from the console,
+then unbind the fbdev drivers from fbcon. Fortunately, unbinding fbcon from
+the console layer will automatically unbind framebuffer drivers from
+fbcon. Thus, there is no need to explicitly unbind the fbdev drivers from
+fbcon.
+
+So, how do we unbind fbcon from the console? Part of the answer is in
+Documentation/console/console.txt. To summarize:
+
+Echo a value to the bind file that represents the framebuffer console
+driver. So assuming vtcon1 represents fbcon, then:
+
+echo 1 > sys/class/vtconsole/vtcon1/bind - attach framebuffer console to
+ console layer
+echo 0 > sys/class/vtconsole/vtcon1/bind - detach framebuffer console from
+ console layer
+
+If fbcon is detached from the console layer, your boot console driver (which is
+usually VGA text mode) will take over. A few drivers (rivafb and i810fb) will
+restore VGA text mode for you. With the rest, before detaching fbcon, you
+must take a few additional steps to make sure that your VGA text mode is
+restored properly. The following is one of the several methods that you can do:
+
+1. Download or install vbetool. This utility is included with most
+ distributions nowadays, and is usually part of the suspend/resume tool.
+
+2. In your kernel configuration, ensure that CONFIG_FRAMEBUFFER_CONSOLE is set
+ to 'y' or 'm'. Enable one or more of your favorite framebuffer drivers.
+
+3. Boot into text mode and as root run:
+
+ vbetool vbestate save > <vga state file>
+
+ The above command saves the register contents of your graphics
+ hardware to <vga state file>. You need to do this step only once as
+ the state file can be reused.
+
+4. If fbcon is compiled as a module, load fbcon by doing:
+
+ modprobe fbcon
+
+5. Now to detach fbcon:
+
+ vbetool vbestate restore < <vga state file> && \
+ echo 0 > /sys/class/vtconsole/vtcon1/bind
+
+6. That's it, you're back to VGA mode. And if you compiled fbcon as a module,
+ you can unload it by 'rmmod fbcon'
+
+7. To reattach fbcon:
+
+ echo 1 > /sys/class/vtconsole/vtcon1/bind
+
+8. Once fbcon is unbound, all drivers registered to the system will also
+become unbound. This means that fbcon and individual framebuffer drivers
+can be unloaded or reloaded at will. Reloading the drivers or fbcon will
+automatically bind the console, fbcon and the drivers together. Unloading
+all the drivers without unloading fbcon will make it impossible for the
+console to bind fbcon.
+
+Notes for vesafb users:
+=======================
+
+Unfortunately, if your bootline includes a vga=xxx parameter that sets the
+hardware in graphics mode, such as when loading vesafb, vgacon will not load.
+Instead, vgacon will replace the default boot console with dummycon, and you
+won't get any display after detaching fbcon. Your machine is still alive, so
+you can reattach vesafb. However, to reattach vesafb, you need to do one of
+the following:
+
+Variation 1:
+
+ a. Before detaching fbcon, do
+
+ vbetool vbemode save > <vesa state file> # do once for each vesafb mode,
+ # the file can be reused
+
+ b. Detach fbcon as in step 5.
+
+ c. Attach fbcon
+
+ vbetool vbestate restore < <vesa state file> && \
+ echo 1 > /sys/class/vtconsole/vtcon1/bind
+
+Variation 2:
+
+ a. Before detaching fbcon, do:
+ echo <ID> > /sys/class/tty/console/bind
+
+
+ vbetool vbemode get
+
+ b. Take note of the mode number
+
+ b. Detach fbcon as in step 5.
+
+ c. Attach fbcon:
+
+ vbetool vbemode set <mode number> && \
+ echo 1 > /sys/class/vtconsole/vtcon1/bind
+
+Samples:
+========
+
+Here are 2 sample bash scripts that you can use to bind or unbind the
+framebuffer console driver if you are in an X86 box:
+
+---------------------------------------------------------------------------
+#!/bin/bash
+# Unbind fbcon
+
+# Change this to where your actual vgastate file is located
+# Or Use VGASTATE=$1 to indicate the state file at runtime
+VGASTATE=/tmp/vgastate
+
+# path to vbetool
+VBETOOL=/usr/local/bin
+
+
+for (( i = 0; i < 16; i++))
+do
+ if test -x /sys/class/vtconsole/vtcon$i; then
+ if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \
+ = 1 ]; then
+ if test -x $VBETOOL/vbetool; then
+ echo Unbinding vtcon$i
+ $VBETOOL/vbetool vbestate restore < $VGASTATE
+ echo 0 > /sys/class/vtconsole/vtcon$i/bind
+ fi
+ fi
+ fi
+done
+
+---------------------------------------------------------------------------
+#!/bin/bash
+# Bind fbcon
+
+for (( i = 0; i < 16; i++))
+do
+ if test -x /sys/class/vtconsole/vtcon$i; then
+ if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \
+ = 1 ]; then
+ echo Unbinding vtcon$i
+ echo 1 > /sys/class/vtconsole/vtcon$i/bind
+ fi
+ fi
+done
+---------------------------------------------------------------------------
+
+--
Antonino Daplas <adaplas@pol.net>
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index afb1335c05d..4aecc9bdb27 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -113,6 +113,14 @@ noquota
grpquota
usrquota
+bh (*) ext3 associates buffer heads to data pages to
+nobh (a) cache disk block mapping information
+ (b) link pages into transaction to provide
+ ordering guarantees.
+ "bh" option forces use of buffer heads.
+ "nobh" option tries to avoid associating buffer
+ heads (supported only for "writeback" mode).
+
Specification
=============
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index a9c00facdf4..14ef3868a32 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1123,6 +1123,14 @@ The top Makefile exports the following variables:
$(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE). The user may
override this value on the command line if desired.
+ INSTALL_MOD_STRIP
+
+ If this variable is specified, will cause modules to be stripped
+ after they are installed. If INSTALL_MOD_STRIP is '1', then the
+ default option --strip-debug will be used. Otherwise,
+ INSTALL_MOD_STRIP will used as the option(s) to the strip command.
+
+
=== 8 Makefile language
The kernel Makefiles are designed to run with GNU Make. The Makefiles
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index bca6f389da6..2e352a605fc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -61,6 +61,7 @@ parameter is applicable:
MTD MTD support is enabled.
NET Appropriate network support is enabled.
NUMA NUMA support is enabled.
+ GENERIC_TIME The generic timeofday code is enabled.
NFS Appropriate NFS support is enabled.
OSS OSS sound support is enabled.
PARIDE The ParIDE subsystem is enabled.
@@ -179,6 +180,11 @@ running once the system is up.
override platform specific driver.
See also Documentation/acpi-hotkey.txt.
+ acpi_pm_good [IA-32,X86-64]
+ Override the pmtimer bug detection: force the kernel
+ to assume that this machine's pmtimer latches its value
+ and always returns good values.
+
enable_timer_pin_1 [i386,x86-64]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
@@ -341,10 +347,11 @@ running once the system is up.
Value can be changed at runtime via
/selinux/checkreqprot.
- clock= [BUGS=IA-32,HW] gettimeofday timesource override.
- Forces specified timesource (if avaliable) to be used
- when calculating gettimeofday(). If specicified
- timesource is not avalible, it defaults to PIT.
+ clock= [BUGS=IA-32, HW] gettimeofday clocksource override.
+ [Deprecated]
+ Forces specified clocksource (if avaliable) to be used
+ when calculating gettimeofday(). If specified
+ clocksource is not avalible, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
disable_8254_timer
@@ -1617,6 +1624,10 @@ running once the system is up.
time Show timing data prefixed to each printk message line
+ clocksource= [GENERIC_TIME] Override the default clocksource
+ Override the default clocksource and use the clocksource
+ with the name specified.
+
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index 3bbe157b45e..61c0fad2fe2 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -241,25 +241,30 @@ The security class "key" has been added to SELinux so that mandatory access
controls can be applied to keys created within various contexts. This support
is preliminary, and is likely to change quite significantly in the near future.
Currently, all of the basic permissions explained above are provided in SELinux
-as well; SE Linux is simply invoked after all basic permission checks have been
+as well; SELinux is simply invoked after all basic permission checks have been
performed.
-Each key is labeled with the same context as the task to which it belongs.
-Typically, this is the same task that was running when the key was created.
-The default keyrings are handled differently, but in a way that is very
-intuitive:
+The value of the file /proc/self/attr/keycreate influences the labeling of
+newly-created keys. If the contents of that file correspond to an SELinux
+security context, then the key will be assigned that context. Otherwise, the
+key will be assigned the current context of the task that invoked the key
+creation request. Tasks must be granted explicit permission to assign a
+particular context to newly-created keys, using the "create" permission in the
+key security class.
- (*) The user and user session keyrings that are created when the user logs in
- are currently labeled with the context of the login manager.
-
- (*) The keyrings associated with new threads are each labeled with the context
- of their associated thread, and both session and process keyrings are
- handled similarly.
+The default keyrings associated with users will be labeled with the default
+context of the user if and only if the login programs have been instrumented to
+properly initialize keycreate during the login process. Otherwise, they will
+be labeled with the context of the login program itself.
Note, however, that the default keyrings associated with the root user are
labeled with the default kernel context, since they are created early in the
boot process, before root has a chance to log in.
+The keyrings associated with new threads are each labeled with the context of
+their associated thread, and both session and process keyrings are handled
+similarly.
+
================
NEW PROCFS FILES
@@ -270,9 +275,17 @@ about the status of the key service:
(*) /proc/keys
- This lists all the keys on the system, giving information about their
- type, description and permissions. The payload of the key is not available
- this way:
+ This lists the keys that are currently viewable by the task reading the
+ file, giving information about their type, description and permissions.
+ It is not possible to view the payload of the key this way, though some
+ information about it may be given.
+
+ The only keys included in the list are those that grant View permission to
+ the reading process whether or not it possesses them. Note that LSM
+ security checks are still performed, and may further filter out keys that
+ the current process is not authorised to view.
+
+ The contents of the file look like this:
SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY
00000001 I----- 39 perm 1f3f0000 0 0 keyring _uid_ses.0: 1/4
@@ -300,7 +313,7 @@ about the status of the key service:
(*) /proc/key-users
This file lists the tracking data for each user that has at least one key
- on the system. Such data includes quota information and statistics:
+ on the system. Such data includes quota information and statistics:
[root@andromeda root]# cat /proc/key-users
0: 46 45/45 1/100 13/10000
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 03a13c462cf..0668f9dc9d2 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -200,6 +200,17 @@ All md devices contain:
This can be written only while the array is being assembled, not
after it is started.
+ layout
+ The "layout" for the array for the particular level. This is
+ simply a number that is interpretted differently by different
+ levels. It can be written while assembling an array.
+
+ resync_start
+ The point at which resync should start. If no resync is needed,
+ this will be a very large number. At array creation it will
+ default to 0, though starting the array as 'clean' will
+ set it much larger.
+
new_dev
This file can be written but not read. The value written should
be a block device number as major:minor. e.g. 8:0
@@ -207,6 +218,54 @@ All md devices contain:
available. It will then appear at md/dev-XXX (depending on the
name of the device) and further configuration is then possible.
+ safe_mode_delay
+ When an md array has seen no write requests for a certain period
+ of time, it will be marked as 'clean'. When another write
+ request arrive, the array is marked as 'dirty' before the write
+ commenses. This is known as 'safe_mode'.
+ The 'certain period' is controlled by this file which stores the
+ period as a number of seconds. The default is 200msec (0.200).
+ Writing a value of 0 disables safemode.
+
+ array_state
+ This file contains a single word which describes the current
+ state of the array. In many cases, the state can be set by
+ writing the word for the desired state, however some states
+ cannot be explicitly set, and some transitions are not allowed.
+
+ clear
+ No devices, no size, no level
+ Writing is equivalent to STOP_ARRAY ioctl
+ inactive
+ May have some settings, but array is not active
+ all IO results in error
+ When written, doesn't tear down array, but just stops it
+ suspended (not supported yet)
+ All IO requests will block. The array can be reconfigured.
+ Writing this, if accepted, will block until array is quiessent
+ readonly
+ no resync can happen. no superblocks get written.
+ write requests fail
+ read-auto
+ like readonly, but behaves like 'clean' on a write request.
+
+ clean - no pending writes, but otherwise active.
+ When written to inactive array, starts without resync
+ If a write request arrives then
+ if metadata is known, mark 'dirty' and switch to 'active'.
+ if not known, block and switch to write-pending
+ If written to an active array that has pending writes, then fails.
+ active
+ fully active: IO and resync can be happening.
+ When written to inactive array, starts with resync
+
+ write-pending
+ clean, but writes are blocked waiting for 'active' to be written.
+
+ active-idle
+ like active, but no writes have been seen for a while (safe_mode_delay).
+
+
sync_speed_min
sync_speed_max
This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
@@ -250,10 +309,18 @@ Each directory contains:
faulty - device has been kicked from active use due to
a detected fault
in_sync - device is a fully in-sync member of the array
+ writemostly - device will only be subject to read
+ requests if there are no other options.
+ This applies only to raid1 arrays.
spare - device is working, but not a full member.
This includes spares that are in the process
of being recoverred to
This list make grow in future.
+ This can be written to.
+ Writing "faulty" simulates a failure on the device.
+ Writing "remove" removes the device from the array.
+ Writing "writemostly" sets the writemostly flag.
+ Writing "-writemostly" clears the writemostly flag.
errors
An approximate count of read errors that have been detected on
diff --git a/Documentation/tty.txt b/Documentation/tty.txt
index 8ff7bc2a081..dab56604745 100644
--- a/Documentation/tty.txt
+++ b/Documentation/tty.txt
@@ -80,13 +80,6 @@ receive_buf() - Hand buffers of bytes from the driver to the ldisc
for processing. Semantics currently rather
mysterious 8(
-receive_room() - Can be called by the driver layer at any time when
- the ldisc is opened. The ldisc must be able to
- handle the reported amount of data at that instant.
- Synchronization between active receive_buf and
- receive_room calls is down to the driver not the
- ldisc. Must not sleep.
-
write_wakeup() - May be called at any point between open and close.
The TTY_DO_WRITE_WAKEUP flag indicates if a call
is needed but always races versus calls. Thus the
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index f2cd6ef53ff..6887d44d266 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -205,6 +205,27 @@ IOMMU
pages Prereserve that many 128K pages for the software IO bounce buffering.
force Force all IO through the software TLB.
+ calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
+ calgary=[translate_empty_slots]
+ calgary=[disable=<PCI bus number>]
+
+ 64k,...,8M - Set the size of each PCI slot's translation table
+ when using the Calgary IOMMU. This is the size of the translation
+ table itself in main memory. The smallest table, 64k, covers an IO
+ space of 32MB; the largest, 8MB table, can cover an IO space of
+ 4GB. Normally the kernel will make the right choice by itself.
+
+ translate_empty_slots - Enable translation even on slots that have
+ no devices attached to them, in case a device will be hotplugged
+ in the future.
+
+ disable=<PCI bus number> - Disable translation on a given PHB. For
+ example, the built-in graphics adapter resides on the first bridge
+ (PCI bus number 0); if translation (isolation) is enabled on this
+ bridge, X servers that access the hardware directly from user
+ space might stop working. Use this option if you have devices that
+ are accessed from userspace directly on some PCI host bridge.
+
Debugging
oops=panic Always panic on oopses. Default is to just kill the process,