diff options
Diffstat (limited to 'arch/arm/kernel/entry-armv.S')
| -rw-r--r-- | arch/arm/kernel/entry-armv.S | 67 |
1 files changed, 28 insertions, 39 deletions
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bb27c317d94..2a5c3fe09a9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -14,12 +14,12 @@ * it to save wrong values... Be aware! */ #include <linux/config.h> -#include <linux/init.h> -#include <asm/thread_info.h> #include <asm/glue.h> -#include <asm/ptrace.h> #include <asm/vfpmacros.h> +#include <asm/hardware.h> @ should be moved into entry-macro.S +#include <asm/arch/irqs.h> @ should be moved into entry-macro.S +#include <asm/arch/entry-macro.S> #include "entry-header.S" @@ -118,7 +118,7 @@ __dabt_svc: @ @ IRQs off again before pulling preserved data off the stack @ - disable_irq r0 + disable_irq @ @ restore SPSR and restart the instruction @@ -198,7 +198,7 @@ __und_svc: @ @ IRQs off again before pulling preserved data off the stack @ -1: disable_irq r0 +1: disable_irq @ @ restore SPSR and restart the instruction @@ -232,7 +232,7 @@ __pabt_svc: @ @ IRQs off again before pulling preserved data off the stack @ - disable_irq r0 + disable_irq @ @ restore SPSR and restart the instruction @@ -316,7 +316,7 @@ __dabt_usr: @ @ IRQs on, then call the main handler @ - enable_irq r2 + enable_irq mov r2, sp adr lr, ret_from_exception b do_DataAbort @@ -418,7 +418,7 @@ call_fpe: movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1) bcs iwmmxt_task_enable #endif - enable_irq r7 + enable_irq add pc, pc, r8, lsr #6 mov r0, r0 @@ -472,7 +472,7 @@ fpundefinstr: __pabt_usr: usr_entry abt - enable_irq r0 @ Enable interrupts + enable_irq @ Enable interrupts mov r0, r2 @ address (pc) mov r1, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -522,8 +522,9 @@ ENTRY(__switch_to) /* * Vector stubs. * - * This code is copied to 0x200 or 0xffff0200 so we can use branches in the - * vectors, rather than ldr's. + * This code is copied to 0xffff0200 so we can use branches in the + * vectors, rather than ldr's. Note that this code must not + * exceed 0x300 bytes. * * Common stub entry macro: * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC @@ -544,7 +545,7 @@ vector_\name: @ mrs r13, cpsr bic r13, r13, #MODE_MASK - orr r13, r13, #MODE_SVC + orr r13, r13, #SVC_MODE msr spsr_cxsf, r13 @ switch to SVC_32 mode and lr, lr, #15 @@ -552,6 +553,7 @@ vector_\name: movs pc, lr @ Changes mode and branches .endm + .globl __stubs_start __stubs_start: /* * Interrupt dispatcher @@ -686,37 +688,24 @@ vector_addrexcptn: .LCsabt: .word __temp_abt + .globl __stubs_end __stubs_end: - .equ __real_stubs_start, .LCvectors + 0x200 + .equ stubs_offset, __vectors_start + 0x200 - __stubs_start -.LCvectors: + .globl __vectors_start +__vectors_start: swi SYS_ERROR0 - b __real_stubs_start + (vector_und - __stubs_start) - ldr pc, __real_stubs_start + (.LCvswi - __stubs_start) - b __real_stubs_start + (vector_pabt - __stubs_start) - b __real_stubs_start + (vector_dabt - __stubs_start) - b __real_stubs_start + (vector_addrexcptn - __stubs_start) - b __real_stubs_start + (vector_irq - __stubs_start) - b __real_stubs_start + (vector_fiq - __stubs_start) - -ENTRY(__trap_init) - stmfd sp!, {r4 - r6, lr} - - mov r0, #0xff000000 - orr r0, r0, #0x00ff0000 @ high vectors position - adr r1, .LCvectors @ set up the vectors - ldmia r1, {r1, r2, r3, r4, r5, r6, ip, lr} - stmia r0, {r1, r2, r3, r4, r5, r6, ip, lr} - - add r2, r0, #0x200 - adr r0, __stubs_start @ copy stubs to 0x200 - adr r1, __stubs_end -1: ldr r3, [r0], #4 - str r3, [r2], #4 - cmp r0, r1 - blt 1b - LOADREGS(fd, sp!, {r4 - r6, pc}) + b vector_und + stubs_offset + ldr pc, .LCvswi + stubs_offset + b vector_pabt + stubs_offset + b vector_dabt + stubs_offset + b vector_addrexcptn + stubs_offset + b vector_irq + stubs_offset + b vector_fiq + stubs_offset + + .globl __vectors_end +__vectors_end: .data |