diff options
Diffstat (limited to 'arch/arm/mach-ixp2000')
| -rw-r--r-- | arch/arm/mach-ixp2000/Kconfig | 8 | ||||
| -rw-r--r-- | arch/arm/mach-ixp2000/core.c | 128 | ||||
| -rw-r--r-- | arch/arm/mach-ixp2000/enp2611.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-ixp2000/ixdp2800.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ixp2000/ixdp2x00.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-ixp2000/pci.c | 13 |
6 files changed, 140 insertions, 35 deletions
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig index 9361e05f6fa..ecb58d83478 100644 --- a/arch/arm/mach-ixp2000/Kconfig +++ b/arch/arm/mach-ixp2000/Kconfig @@ -54,6 +54,14 @@ config ARCH_IXDP2X01 depends on ARCH_IXDP2401 || ARCH_IXDP2801 default y +config IXP2000_SUPPORT_BROKEN_PCI_IO + bool "Support broken PCI I/O on older IXP2000s" + default y + help + Say 'N' here if you only intend to run your kernel on an + IXP2000 B0 or later model and do not need the PCI I/O + byteswap workaround. Say 'Y' otherwise. + endmenu endif diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4f3c3d5c781..4b9d841e04c 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -40,6 +40,8 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; @@ -101,6 +103,11 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .length = IXP2000_PCI_CSR_SIZE, .type = MT_DEVICE }, { + .virtual = IXP2000_MSF_VIRT_BASE, + .physical = IXP2000_MSF_PHYS_BASE, + .length = IXP2000_MSF_SIZE, + .type = MT_DEVICE + }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .physical = IXP2000_PCI_IO_PHYS_BASE, .length = IXP2000_PCI_IO_SIZE, @@ -162,12 +169,13 @@ void __init ixp2000_map_io(void) static unsigned ticks_per_jiffy; static unsigned ticks_per_usec; static unsigned next_jiffy_time; +static volatile unsigned long *missing_jiffy_timer_csr; unsigned long ixp2000_gettimeoffset (void) { unsigned long offset; - offset = next_jiffy_time - *IXP2000_T4_CSR; + offset = next_jiffy_time - *missing_jiffy_timer_csr; return offset / ticks_per_usec; } @@ -178,8 +186,8 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - - while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) { + + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; } @@ -191,26 +199,43 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ixp2000_timer_irq = { .name = "IXP2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp2000_timer_interrupt, }; void __init ixp2000_init_time(unsigned long tick_rate) { - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; + /* + * We use timer 1 as our timer interrupt. + */ + ixp2000_reg_write(IXP2000_T1_CLR, 0); ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); /* - * We use T4 as a monotonic counter to track missed jiffies + * We use a second timer as a monotonic counter for tracking + * missed jiffies. The IXP2000 has four timers, but if we're + * on an A-step IXP2800, timer 2 and 3 don't work, so on those + * chips we use timer 4. Timer 4 is the only timer that can + * be used for the watchdog, so we use timer 2 if we're on a + * non-buggy chip. */ - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { + printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); + + ixp2000_reg_write(IXP2000_T4_CLR, 0); + ixp2000_reg_write(IXP2000_T4_CLD, -1); + ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T4_CSR; + } else { + ixp2000_reg_write(IXP2000_T2_CLR, 0); + ixp2000_reg_write(IXP2000_T2_CLD, -1); + ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T2_CSR; + } next_jiffy_time = 0xffffffff; /* register for interrupt */ @@ -220,35 +245,40 @@ void __init ixp2000_init_time(unsigned long tick_rate) /************************************************************************* * GPIO helpers *************************************************************************/ -static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_level_low; static unsigned long GPIO_IRQ_level_high; -void gpio_line_config(int line, int style) +static void update_gpio_int_csrs(void) +{ + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); +} + +void gpio_line_config(int line, int direction) { unsigned long flags; local_irq_save(flags); + if (direction == GPIO_OUT) { + irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - if(style == GPIO_OUT) { /* if it's an output, it ain't an interrupt anymore */ - ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line); - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; - } else if(style == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + update_gpio_int_csrs(); + + ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + } else if (direction == GPIO_IN) { + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); } - local_irq_restore(flags); -} +} /************************************************************************* @@ -267,9 +297,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str } } +static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP2000_GPIO0; + + /* + * First, configure this GPIO line as an input. + */ + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + + /* + * Then, set the proper trigger type. + */ + if (type & IRQT_FALLING) + GPIO_IRQ_falling_edge |= 1 << line; + else + GPIO_IRQ_falling_edge &= ~(1 << line); + if (type & IRQT_RISING) + GPIO_IRQ_rising_edge |= 1 << line; + else + GPIO_IRQ_rising_edge &= ~(1 << line); + if (type & IRQT_LOW) + GPIO_IRQ_level_low |= 1 << line; + else + GPIO_IRQ_level_low &= ~(1 << line); + if (type & IRQT_HIGH) + GPIO_IRQ_level_high |= 1 << line; + else + GPIO_IRQ_level_high &= ~(1 << line); + update_gpio_int_csrs(); + + /* + * Finally, mark the corresponding IRQ as valid. + */ + irq_desc[irq].valid = 1; + + return 0; +} + static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) { ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + + ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } @@ -284,6 +355,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) } static struct irqchip ixp2000_GPIO_irq_chip = { + .type = ixp2000_GPIO_irq_type, .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, .unmask = ixp2000_GPIO_irq_unmask @@ -320,7 +392,7 @@ static void ixp2000_irq_mask(unsigned int irq) static void ixp2000_irq_unmask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } static struct irqchip ixp2000_irq_chip = { @@ -357,16 +429,16 @@ void __init ixp2000_init_irq(void) * our mask/unmask code much simpler. */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); set_irq_handler(irq, do_level_IRQ); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - + /* * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling gpio_line_set(); + * by calling set_irq_type(). */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 04b38bcf9aa..f3a291b6a9f 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -197,8 +197,23 @@ static struct platform_device enp2611_flash = { .resource = &enp2611_flash_resource, }; +static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { + .sda_pin = ENP2611_GPIO_SDA, + .scl_pin = ENP2611_GPIO_SCL, +}; + +static struct platform_device enp2611_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &enp2611_i2c_gpio_pins + }, + .num_resources = 0 +}; + static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash + &enp2611_flash, + &enp2611_i2c_controller }; static void __init enp2611_init_machine(void) diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index aec13c7108a..468a4bbfb72 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -42,12 +42,6 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> - -void ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - /************************************************************************* * IXDP2800 timer tick *************************************************************************/ diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 21c41fe15b9..5e4380747b5 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -42,6 +42,9 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> +#include <asm/arch/gpio.h> + + /************************************************************************* * IXDP2x00 IRQ Initialization *************************************************************************/ diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 5ff2f2718c5..0788fb2b5c1 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -198,6 +198,19 @@ clear_master_aborts(void) void __init ixp2000_pci_preinit(void) { +#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO + /* + * Configure the PCI unit to properly byteswap I/O transactions, + * and verify that it worked. + */ + ixp2000_reg_write(IXP2000_PCI_CONTROL, + (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); + + if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) + panic("IXP2000: PCI I/O is broken on this ixp model, and " + "the needed workaround has not been configured in"); +#endif + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, "PCI config cycle to non-existent device"); } |