diff options
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 187 |
1 files changed, 106 insertions, 81 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0ff5a6c53aa..378c2f61835 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state); static struct powerdomain *mpu_pwrdm; -/* PRCM Interrupt Handler for wakeups */ -static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +/* + * PRCM Interrupt Handler Helper Function + * + * The purpose of this function is to clear any wake-up events latched + * in the PRCM PM_WKST_x registers. It is possible that a wake-up event + * may occur whilst attempting to clear a PM_WKST_x register and thus + * set another bit in this register. A while loop is used to ensure + * that any peripheral wake-up events occurring while attempting to + * clear the PM_WKST_x are detected and cleared. + */ +static int prcm_clear_mod_irqs(s16 module, u8 regs) { - u32 wkst, irqstatus_mpu; - u32 fclk, iclk; - - /* WKUP */ - wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + u32 wkst, fclk, iclk, clken; + u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; + u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1; + u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1; + u16 grpsel_off = (regs == 3) ? + OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL; + int c = 0; + + wkst = prm_read_mod_reg(module, wkst_off); + wkst &= prm_read_mod_reg(module, grpsel_off); if (wkst) { - iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); - fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); - cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); - cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); - prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); - while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); - cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + iclk = cm_read_mod_reg(module, iclk_off); + fclk = cm_read_mod_reg(module, fclk_off); + while (wkst) { + clken = wkst; + cm_set_mod_reg_bits(clken, module, iclk_off); + /* + * For USBHOST, we don't know whether HOST1 or + * HOST2 woke us up, so enable both f-clocks + */ + if (module == OMAP3430ES2_USBHOST_MOD) + clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT; + cm_set_mod_reg_bits(clken, module, fclk_off); + prm_write_mod_reg(wkst, module, wkst_off); + wkst = prm_read_mod_reg(module, wkst_off); + c++; + } + cm_write_mod_reg(iclk, module, iclk_off); + cm_write_mod_reg(fclk, module, fclk_off); } - /* CORE */ - wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); - if (wkst) { - iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); - fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); - prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); - while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) - cpu_relax(); - cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); - cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); - } - wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); - if (wkst) { - iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); - fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); - cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); - while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) - cpu_relax(); - cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); - cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - } + return c; +} - /* PER */ - wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); - if (wkst) { - iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); - fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); - prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); - while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); - cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); - } +static int _prcm_int_handle_wakeup(void) +{ + int c; + c = prcm_clear_mod_irqs(WKUP_MOD, 1); + c += prcm_clear_mod_irqs(CORE_MOD, 1); + c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1); if (omap_rev() > OMAP3430_REV_ES1_0) { - /* USBHOST */ - wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); - if (wkst) { - iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, - PM_WKST); - while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - } + c += prcm_clear_mod_irqs(CORE_MOD, 3); + c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1); } - irqstatus_mpu = prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - prm_write_mod_reg(irqstatus_mpu, OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return c; +} + +/* + * PRCM Interrupt Handler + * + * The PRM_IRQSTATUS_MPU register indicates if there are any pending + * interrupts from the PRCM for the MPU. These bits must be cleared in + * order to clear the PRCM interrupt. The PRCM interrupt handler is + * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear + * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU + * register indicates that a wake-up event is pending for the MPU and + * this bit can only be cleared if the all the wake-up events latched + * in the various PM_WKST_x registers have been cleared. The interrupt + * handler is implemented using a do-while loop so that if a wake-up + * event occurred during the processing of the prcm interrupt handler + * (setting a bit in the corresponding PM_WKST_x register and thus + * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register) + * this would be handled. + */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 irqstatus_mpu; + int c = 0; + + do { + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) { + c = _prcm_int_handle_wakeup(); + + /* + * Is the MPU PRCM interrupt handler racing with the + * IVA2 PRCM interrupt handler ? + */ + WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup " + "but no wakeup sources are marked\n"); + } else { + /* XXX we need to expand our PRCM interrupt handler */ + WARN(1, "prcm: WARNING: PRCM interrupt received, but " + "no code to handle it (%08x)\n", irqstatus_mpu); + } + + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) - cpu_relax(); + } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)); return IRQ_HANDLED; } @@ -624,6 +639,16 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + /* Enable GPIO wakeups in PER */ + prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | + OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | + OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + /* and allow them to wake up MPU */ + prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | + OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | + OMAP3430_GRPSEL_GPIO6, + OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + /* Don't attach IVA interrupts */ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); |