aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/include')
-rw-r--r--arch/arm/mach-pxa/include/mach/colibri.h32
-rw-r--r--arch/arm/mach-pxa/include/mach/dma.h83
-rw-r--r--arch/arm/mach-pxa/include/mach/gpio.h32
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa25x.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa27x.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa300.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa320.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h130
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa930.h1
10 files changed, 45 insertions, 241 deletions
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 2ae373fb567..3f2a01d6a03 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,19 +1,31 @@
#ifndef _COLIBRI_H_
#define _COLIBRI_H_
+/*
+ * common settings for all modules
+ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int) {}
+#endif
/* physical memory regions */
-#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
-#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
-/* virtual memory regions */
-#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */
+/* definitions for Colibri PXA270 */
-/* size of flash */
-#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000 114
-#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
+#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
+#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
+#define COLIBRI_PXA270_ETH_IRQ \
+ gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
#endif /* _COLIBRI_H_ */
+
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index b0812f59d3f..5bd55894a48 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -16,87 +16,6 @@
/* DMA Controller Registers Definitions */
#define DMAC_REGS_VIRT io_p2v(0x40000000)
-#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
-
-#define DCSR(n) DMAC_REG((n) << 2)
-#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */
-#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */
-#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4))
-#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4))
-#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4))
-#define DCMD(n) DMAC_REG(0x020c + ((n) << 4))
-#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
- (((n) & 0x3f) << 2))
-
-#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
-#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_EORINTR (1 << 9) /* The end of Receive */
-#endif
-
-#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
-#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-
-#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
-#define DDADR_STOP (1 << 0) /* Stop (read / write) */
-
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
-#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
-#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
-#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
-#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
-#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
-#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
-#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
-#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
-#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
- volatile u32 ddadr; /* Points to the next descriptor + flags */
- volatile u32 dsadr; /* DSADR value for the current transfer */
- volatile u32 dtadr; /* DTADR value for the current transfer */
- volatile u32 dcmd; /* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int irq, int num_ch);
-
-int pxa_request_dma (char *name,
- pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data);
-
-void pxa_free_dma (int dma_ch);
+#include <plat/dma.h>
#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c72c89a2285..b024a8b3743 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -99,40 +99,12 @@
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
#define NR_BUILTIN_GPIO 128
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
- return GPLR(gpio) & GPIO_bit(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
- if (value)
- GPSR(gpio) = GPIO_bit(gpio);
- else
- GPCR(gpio) = GPIO_bit(gpio);
- } else {
- __gpio_set_value(gpio, value);
- }
-}
-
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
-
#ifdef CONFIG_CPU_PXA26x
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
@@ -165,7 +137,5 @@ static inline int __gpio_is_occupied(unsigned gpio)
return GPDR(gpio) & GPIO_bit(gpio);
}
-typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index a72869b73ee..b13dc0269a6 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -1,7 +1,6 @@
#ifndef __ASM_ARCH_MFP_PXA25X_H
#define __ASM_ARCH_MFP_PXA25X_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
/* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index da4f85a4f99..6543c05f47e 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -8,7 +8,6 @@
* specific controller, and this should work in most cases.
*/
-#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 3e9211591e2..658b28ed129 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -1,7 +1,7 @@
#ifndef __ASM_ARCH_MFP_PXA2XX_H
#define __ASM_ARCH_MFP_PXA2XX_H
-#include <mach/mfp.h>
+#include <plat/mfp.h>
/*
* the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index bc1fb33a6e7..ae8441192ef 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -15,7 +15,6 @@
#ifndef __ASM_ARCH_MFP_PXA300_H
#define __ASM_ARCH_MFP_PXA300_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
@@ -41,6 +40,7 @@
#endif
/* Chip Select */
+#define GPIO1_nCS2 MFP_CFG(GPIO1, AF1)
#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
/* AC97 */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 67f8385ea54..07897e61d05 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -15,7 +15,6 @@
#ifndef __ASM_ARCH_MFP_PXA320_H
#define __ASM_ARCH_MFP_PXA320_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
@@ -38,6 +37,7 @@
#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
/* Chip Select */
+#define GPIO3_nCS2 MFP_CFG(GPIO3, AF1)
#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
/* AC97 */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
index 1f6b35c015d..d375195d982 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -1,68 +1,9 @@
#ifndef __ASM_ARCH_MFP_PXA3XX_H
#define __ASM_ARCH_MFP_PXA3XX_H
-#define MFPR_BASE (0x40e10000)
-#define MFPR_SIZE (PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL (0x1 << 15)
-#define MFPR_PULLUP_EN (0x1 << 14)
-#define MFPR_PULLDOWN_EN (0x1 << 13)
-#define MFPR_SLEEP_SEL (0x1 << 9)
-#define MFPR_SLEEP_OE_N (0x1 << 7)
-#define MFPR_EDGE_CLEAR (0x1 << 6)
-#define MFPR_EDGE_FALL_EN (0x1 << 5)
-#define MFPR_EDGE_RISE_EN (0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x) ((x) << 8)
-#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
+#include <plat/mfp.h>
-#define MFPR_EDGE_NONE (0)
-#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
- * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
- *
- * Input 0 X(0) X(0) X(0) 0
- * Drive 0 0 0 0 X(1) 0
- * Drive 1 0 1 X(1) 0 0
- * Pull hi (1) 1 X(1) 1 0 0
- * Pull lo (0) 1 X(0) 0 1 0
- * Z (float) 1 X(0) 0 0 0
- */
-#define MFPR_LPM_INPUT (0)
-#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK (0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior, the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition pull_sel pullup_en pulldown_en
- * MFPR_PULL_NONE 0 0 0
- * MFPR_PULL_LOW 1 0 1
- * MFPR_PULL_HIGH 1 1 0
- * MFPR_PULL_BOTH 1 1 1
- */
-#define MFPR_PULL_NONE (0)
-#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_BASE (0x40e10000)
/* PXA3xx common MFP configurations - processor specific ones defined
* in mfp-pxa300.h and mfp-pxa320.h
@@ -197,56 +138,21 @@
#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR() to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct pxa3xx_mfp_addr_map {
- unsigned int start;
- unsigned int end;
- unsigned long offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
- { MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
- { MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
+/* NOTE: usage of these two functions is not recommended,
+ * use pxa3xx_mfp_config() instead.
*/
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
+static inline unsigned long pxa3xx_mfp_read(int mfp)
+{
+ return mfp_read(mfp);
+}
+
+static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+ mfp_write(mfp, val);
+}
+
+static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
+{
+ mfp_config(mfp_cfg, num);
+}
#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fa73f56a137..0d119d3b922 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_MFP_PXA9xx_H
#define __ASM_ARCH_MFP_PXA9xx_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */