diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 22 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 13 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Makefile.boot | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-generic.c | 80 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 197 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/devices.c | 89 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/id.c | 124 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/io.c | 53 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/irq.c | 149 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/mux.c | 65 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prcm.h | 419 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/serial.c | 180 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/sram-fn.S | 333 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/timer-gp.c | 126 | ||||
| -rw-r--r-- | arch/arm/mm/Kconfig | 2 |
17 files changed, 1857 insertions, 1 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ec77721507c..3df7cbd924a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig" source "arch/arm/mach-omap1/Kconfig" +source "arch/arm/mach-omap2/Kconfig" + source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-lh7a40x/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 114cda7f1b7..81bd2193fe6 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_OMAP1) := omap1 + machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig new file mode 100644 index 00000000000..578880943cf --- /dev/null +++ b/arch/arm/mach-omap2/Kconfig @@ -0,0 +1,22 @@ +comment "OMAP Core Type" + depends on ARCH_OMAP2 + +config ARCH_OMAP24XX + bool "OMAP24xx Based System" + depends on ARCH_OMAP2 + +config ARCH_OMAP2420 + bool "OMAP2420 support" + depends on ARCH_OMAP24XX + +comment "OMAP Board Type" + depends on ARCH_OMAP2 + +config MACH_OMAP_GENERIC + bool "Generic OMAP board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + +config MACH_OMAP_H4 + bool "OMAP 2420 H4 board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile new file mode 100644 index 00000000000..42041166435 --- /dev/null +++ b/arch/arm/mach-omap2/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o + +obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o + +# Specific board support +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o + diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot new file mode 100644 index 00000000000..565aff7f37a --- /dev/null +++ b/arch/arm/mach-omap2/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c new file mode 100644 index 00000000000..c602e7a3d93 --- /dev/null +++ b/arch/arm/mach-omap2/board-generic.c @@ -0,0 +1,80 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-generic.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * Code for generic OMAP2 board. Should work on many OMAP2 systems where + * the bootloader passes the board-specific data to the kernel. + * Do not put any board specific code to this file; create a new machine + * type if you need custom low-level initializations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_board_config_kernel generic_config[] = { + { OMAP_TAG_UART, &generic_uart_config }, + { OMAP_TAG_MMC, &generic_mmc_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = generic_config; + omap_board_config_size = ARRAY_SIZE(generic_config); + omap_serial_init(); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c new file mode 100644 index 00000000000..f2554469a76 --- /dev/null +++ b/arch/arm/mach-omap2/board-h4.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-h4.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/prcm.h> + +#include <asm/io.h> +#include <asm/delay.h> + +static struct mtd_partition h4_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data h4_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = h4_partitions, + .nr_parts = ARRAY_SIZE(h4_partitions), +}; + +static struct resource h4_flash_resource = { + .start = H4_CS0_BASE, + .end = H4_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h4_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &h4_flash_data, + }, + .num_resources = 1, + .resource = &h4_flash_resource, +}; + +static struct resource h4_smc91x_resources[] = { + [0] = { + .start = OMAP24XX_ETHR_START, /* Physical */ + .end = OMAP24XX_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(h4_smc91x_resources), + .resource = h4_smc91x_resources, +}; + +static struct platform_device *h4_devices[] __initdata = { + &h4_smc91x_device, + &h4_flash_device, +}; + +static inline void __init h4_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011200; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + udelay(100); + + omap_cfg_reg(M15_24XX_GPIO92); + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_h4_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + h4_init_smc91x(); +} + +static struct omap_uart_config h4_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config h4_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config h4_lcd_config __initdata = { + .panel_name = "h4", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel h4_config[] = { + { OMAP_TAG_UART, &h4_uart_config }, + { OMAP_TAG_MMC, &h4_mmc_config }, + { OMAP_TAG_LCD, &h4_lcd_config }, +}; + +static void __init omap_h4_init(void) +{ + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); + omap_board_config = h4_config; + omap_board_config_size = ARRAY_SIZE(h4_config); + omap_serial_init(); +} + +static void __init omap_h4_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, + .init_machine = omap_h4_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c new file mode 100644 index 00000000000..7181edb8935 --- /dev/null +++ b/arch/arm/mach-omap2/devices.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-omap2/devices.c + * + * OMAP2 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + +extern void omap_nop_release(struct device *dev); + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP2_I2C_BASE2 0x48072000 +#define OMAP2_I2C_INT2 57 + +static struct resource i2c_resources2[] = { + { + .start = OMAP2_I2C_BASE2, + .end = OMAP2_I2C_BASE2 + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP2_I2C_INT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_i2c_device2 = { + .name = "i2c_omap", + .id = 2, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources2), + .resource = i2c_resources2, +}; + +/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ +static void omap_init_i2c(void) +{ + /* REVISIT: Second I2C not in use on H4? */ + if (machine_is_omap_h4()) + return; + + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + (void) platform_device_register(&omap_i2c_device2); +} + +#else + +static void omap_init_i2c(void) {} + +#endif + +/*-------------------------------------------------------------------------*/ + +static int __init omap2_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + + return 0; +} +arch_initcall(omap2_init_devices); + diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c new file mode 100644 index 00000000000..76187300f2b --- /dev/null +++ b/arch/arm/mach-omap2/id.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-omap2/id.c + * + * OMAP2 CPU identification code + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define OMAP24XX_TAP_BASE io_p2v(0x48014000) + +#define OMAP_TAP_IDCODE 0x0204 +#define OMAP_TAP_PROD_ID 0x0208 + +#define OMAP_TAP_DIE_ID_0 0x0218 +#define OMAP_TAP_DIE_ID_1 0x021C +#define OMAP_TAP_DIE_ID_2 0x0220 +#define OMAP_TAP_DIE_ID_3 0x0224 + +/* system_rev fields for OMAP2 processors: + * CPU id bits [31:16], + * CPU device type [15:12], (unprg,normal,POP) + * CPU revision [11:08] + * CPU class bits [07:00] + */ + +struct omap_id { + u16 hawkeye; /* Silicon type (Hawkeye id) */ + u8 dev; /* Device type from production_id reg */ + u32 type; /* combined type id copied to system_rev */ +}; + +/* Register values to detect the OMAP version */ +static struct omap_id omap_ids[] __initdata = { + { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 }, + { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 }, + { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 }, + { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 }, + { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 }, + { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 }, +}; + +static u32 __init read_tap_reg(int reg) +{ + return __raw_readl(OMAP24XX_TAP_BASE + reg); +} + +void __init omap2_check_revision(void) +{ + int i, j; + u32 idcode; + u32 prod_id; + u16 hawkeye; + u8 dev_type; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + prod_id = read_tap_reg(OMAP_TAP_PROD_ID); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0x0f; + dev_type = (prod_id >> 16) & 0x0f; + +#ifdef DEBUG + printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n", + idcode, rev, hawkeye, (idcode >> 1) & 0x7ff); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_0)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n", + read_tap_reg(OMAP_TAP_DIE_ID_1), + (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_2)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_3)); + printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", + prod_id, dev_type); +#endif + + /* Check hawkeye ids */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (hawkeye == omap_ids[i].hawkeye) + break; + } + + if (i == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP CPU id\n"); + return; + } + + for (j = i; j < ARRAY_SIZE(omap_ids); j++) { + if (dev_type == omap_ids[j].dev) + break; + } + + if (j == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP device type. " + "Handling it as OMAP%04x\n", + omap_ids[i].type >> 16); + j = i; + } + system_rev = omap_ids[j].type; + + system_rev |= rev << 8; + + /* Add the cpu class info (24xx) */ + system_rev |= 0x24; + + pr_info("OMAP%04x", system_rev >> 16); + if ((system_rev >> 8) & 0x0f) + printk("%x", (system_rev >> 8) & 0x0f); + printk("\n"); +} + diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c new file mode 100644 index 00000000000..8ea67bf196a --- /dev/null +++ b/arch/arm/mach-omap2/io.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/mach-omap2/io.c + * + * OMAP2 I/O mapping code + * + * Copyright (C) 2005 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/arch/mux.h> + +extern void omap_sram_init(void); +extern int omap2_clk_init(void); +extern void omap2_check_revision(void); + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc omap2_io_desc[] __initdata = { + { + .virtual = L3_24XX_VIRT, + .pfn = __phys_to_pfn(L3_24XX_PHYS), + .length = L3_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + } +}; + +void __init omap_map_common_io(void) +{ + iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); + omap2_check_revision(); + omap_sram_init(); + omap2_mux_init(); + omap2_clk_init(); +} diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c new file mode 100644 index 00000000000..d7baff675cf --- /dev/null +++ b/arch/arm/mach-omap2/irq.c @@ -0,0 +1,149 @@ +/* + * linux/arch/arm/mach-omap/omap2/irq.c + * + * Interrupt handler for OMAP2 boards. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/interrupt.h> +#include <asm/hardware.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/io.h> + +#define INTC_REVISION 0x0000 +#define INTC_SYSCONFIG 0x0010 +#define INTC_SYSSTATUS 0x0014 +#define INTC_CONTROL 0x0048 +#define INTC_MIR_CLEAR0 0x0088 +#define INTC_MIR_SET0 0x008c + +/* + * OMAP2 has a number of different interrupt controllers, each interrupt + * controller is identified as its own "bank". Register definitions are + * fairly consistent for each bank, but not all registers are implemented + * for each bank.. when in doubt, consult the TRM. + */ +static struct omap_irq_bank { + unsigned long base_reg; + unsigned int nr_irqs; +} __attribute__ ((aligned(4))) irq_banks[] = { + { + /* MPU INTC */ + .base_reg = OMAP24XX_IC_BASE, + .nr_irqs = 96, + }, { + /* XXX: DSP INTC */ + +#if 0 + /* + * Commented out for now until we fix the IVA clocking + */ +#ifdef CONFIG_ARCH_OMAP2420 + }, { + /* IVA INTC (2420 only) */ + .base_reg = OMAP24XX_IVA_INTC_BASE, + .nr_irqs = 16, /* Actually 32, but only 16 are used */ +#endif +#endif + } +}; + +/* XXX: FIQ and additional INTC support (only MPU at the moment) */ +static void omap_ack_irq(unsigned int irq) +{ + omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); +} + +static void omap_mask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); +} + +static void omap_unmask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); +} + +static void omap_mask_ack_irq(unsigned int irq) +{ + omap_mask_irq(irq); + omap_ack_irq(irq); +} + +static struct irqchip omap_irq_chip = { + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, +}; + +static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) +{ + unsigned long tmp; + + tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff; + printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " + "(revision %ld.%ld) with %d interrupts\n", + bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); + + tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG); + tmp |= 1 << 1; /* soft reset */ + omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + + while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + /* Wait for reset to complete */; +} + +void __init omap_init_irq(void) +{ + unsigned long nr_irqs = 0; + unsigned int nr_banks = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + + /* XXX */ + if (!bank->base_reg) + continue; + + omap_irq_bank_init_one(bank); + + nr_irqs += bank->nr_irqs; + nr_banks++; + } + + printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", + nr_irqs, nr_banks, nr_banks > 1 ? "s" : ""); + + for (i = 0; i < nr_irqs; i++) { + set_irq_chip(i, &omap_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID); + } +} + diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c new file mode 100644 index 00000000000..ea4654815dd --- /dev/null +++ b/arch/arm/mach-omap2/mux.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-omap2/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +#include <asm/arch/mux.h> + +#ifdef CONFIG_OMAP_MUX + +/* NOTE: See mux.h for the enumeration */ + +struct pin_config __initdata_or_module omap24xx_pins[] = { +/* + * description mux mux pull pull debug + * offset mode ena type + */ + +/* 24xx I2C */ +MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1) +MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1) +MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1) +MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) + +/* Menelaus interrupt */ +MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) + +/* 24xx GPIO */ +MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) +MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) + +}; + +int __init omap2_mux_init(void) +{ + omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins)); + return 0; +} + +#endif diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h new file mode 100644 index 00000000000..2eb89b936c8 --- /dev/null +++ b/arch/arm/mach-omap2/prcm.h @@ -0,0 +1,419 @@ +/* + * prcm.h - Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DPM_PRCM_H +#define __ASM_ARM_ARCH_DPM_PRCM_H + +/* SET_PERFORMANCE_LEVEL PARAMETERS */ +#define PRCM_HALF_SPEED 1 +#define PRCM_FULL_SPEED 2 + +#ifndef __ASSEMBLER__ + +#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset)) + +#define PRCM_REVISION PRCM_REG32(0x000) +#define PRCM_SYSCONFIG PRCM_REG32(0x010) +#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018) +#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C) +#define PRCM_VOLTCTRL PRCM_REG32(0x050) +#define PRCM_VOLTST PRCM_REG32(0x054) +#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060) +#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070) +#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078) +#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080) +#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084) +#define PRCM_VOLTSETUP PRCM_REG32(0x090) +#define PRCM_CLKSSETUP PRCM_REG32(0x094) +#define PRCM_POLCTRL PRCM_REG32(0x098) + +/* GENERAL PURPOSE */ +#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0) +#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4) +#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8) +#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC) +#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0) +#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4) +#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8) +#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC) +#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0) +#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4) +#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8) +#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC) +#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0) +#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4) +#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8) +#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC) +#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0) +#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4) +#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8) +#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC) + +/* MPU */ +#define CM_CLKSEL_MPU PRCM_REG32(0x140) +#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148) +#define RM_RSTST_MPU PRCM_REG32(0x158) +#define PM_WKDEP_MPU PRCM_REG32(0x1C8) +#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4) +#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8) +#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC) +#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0) +#define PM_PWSTST_MPU PRCM_REG32(0x1E4) + +/* CORE */ +#define CM_FCLKEN1_CORE PRCM_REG32(0x200) +#define CM_FCLKEN2_CORE PRCM_REG32(0x204) +#define CM_FCLKEN3_CORE PRCM_REG32(0x208) +#define CM_ICLKEN1_CORE PRCM_REG32(0x210) +#define CM_ICLKEN2_CORE PRCM_REG32(0x214) +#define CM_ICLKEN3_CORE PRCM_REG32(0x218) +#define CM_ICLKEN4_CORE PRCM_REG32(0x21C) +#define CM_IDLEST1_CORE PRCM_REG32(0x220) +#define CM_IDLEST2_CORE PRCM_REG32(0x224) +#define CM_IDLEST3_CORE PRCM_REG32(0x228) +#define CM_IDLEST4_CORE PRCM_REG32(0x22C) +#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230) +#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234) +#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238) +#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C) +#define CM_CLKSEL1_CORE PRCM_REG32(0x240) +#define CM_CLKSEL2_CORE PRCM_REG32(0x244) +#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248) +#define PM_WKEN1_CORE PRCM_REG32(0x2A0) +#define PM_WKEN2_CORE PRCM_REG32(0x2A4) +#define PM_WKST1_CORE PRCM_REG32(0x2B0) +#define PM_WKST2_CORE PRCM_REG32(0x2B4) +#define PM_WKDEP_CORE PRCM_REG32(0x2C8) +#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0) +#define PM_PWSTST_CORE PRCM_REG32(0x2E4) + +/* GFX */ +#define CM_FCLKEN_GFX PRCM_REG32(0x300) +#define CM_ICLKEN_GFX PRCM_REG32(0x310) +#define CM_IDLEST_GFX PRCM_REG32(0x320) +#define CM_CLKSEL_GFX PRCM_REG32(0x340) +#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348) +#define RM_RSTCTRL_GFX PRCM_REG32(0x350) +#define RM_RSTST_GFX PRCM_REG32(0x358) +#define PM_WKDEP_GFX PRCM_REG32(0x3C8) +#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0) +#define PM_PWSTST_GFX PRCM_REG32(0x3E4) + +/* WAKE-UP */ +#define CM_FCLKEN_WKUP PRCM_REG32(0x400) +#define CM_ICLKEN_WKUP PRCM_REG32(0x410) +#define CM_IDLEST_WKUP PRCM_REG32(0x420) +#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430) +#define CM_CLKSEL_WKUP PRCM_REG32(0x440) +#define RM_RSTCTRL_WKUP PRCM_REG32(0x450) +#define RM_RSTTIME_WKUP PRCM_REG32(0x454) +#define RM_RSTST_WKUP PRCM_REG32(0x458) +#define PM_WKEN_WKUP PRCM_REG32(0x4A0) +#define PM_WKST_WKUP PRCM_REG32(0x4B0) + +/* CLOCKS */ +#define CM_CLKEN_PLL PRCM_REG32(0x500) +#define CM_IDLEST_CKGEN PRCM_REG32(0x520) +#define CM_AUTOIDLE_PLL PRCM_REG32(0x530) +#define CM_CLKSEL1_PLL PRCM_REG32(0x540) +#define CM_CLKSEL2_PLL PRCM_REG32(0x544) + +/* DSP */ +#define CM_FCLKEN_DSP PRCM_REG32(0x800) +#define CM_ICLKEN_DSP PRCM_REG32(0x810) +#define CM_IDLEST_DSP PRCM_REG32(0x820) +#define CM_AUTOIDLE_DSP PRCM_REG32(0x830) +#define CM_CLKSEL_DSP PRCM_REG32(0x840) +#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848) +#define RM_RSTCTRL_DSP PRCM_REG32(0x850) +#define RM_RSTST_DSP PRCM_REG32(0x858) +#define PM_WKEN_DSP PRCM_REG32(0x8A0) +#define PM_WKDEP_DSP PRCM_REG32(0x8C8) +#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0) +#define PM_PWSTST_DSP PRCM_REG32(0x8E4) +#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0) +#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4) + +/* IVA */ +#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8) +#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC) + +/* Modem on 2430 */ +#define CM_FCLKEN_MDM PRCM_REG32(0xC00) +#define CM_ICLKEN_MDM PRCM_REG32(0xC10) +#define CM_IDLEST_MDM PRCM_REG32(0xC20) +#define CM_CLKSEL_MDM PRCM_REG32(0xC40) + +/* FIXME: Move to header for 2430 */ +#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000) +#define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) + +#define GPMC_BASE (OMAP24XX_GPMC_BASE) +#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset)) + +#define GPT1_BASE (OMAP24XX_GPT1) +#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) + +/* Misc sysconfig */ +#define DISPC_SYSCONFIG DISP_REG32(0x410) +#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000) +#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) +#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10) + +//#define DSP_MMU_SYSCONFIG 0x5A000010 +#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10) +//#define IVA_MMU_SYSCONFIG 0x5D000010 +//#define DSP_DMA_SYSCONFIG 0x00FCC02C +#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C) +#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C) +#define GPMC_SYSCONFIG GPMC_REG32(0x010) +#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010) +#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054) +#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054) +#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054) +//#define IVA_SYSCONFIG 0x5C060010 +#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10) +#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10) +#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010) +//#define VLYNQ_SYSCONFIG 0x67FFFE10 + +/* rkw - good cannidates for PM_ to start what nm was trying */ +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + +#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) +#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) +#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) +#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10) +#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10) +#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10) +#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10) +#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10) +#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10) +#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10) +#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) +#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) + +#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1))) + +#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10)) +#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10)) +#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10)) +#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10)) + +/* GP TIMER 1 */ +#define GPTIMER1_TISTAT GPT1_REG32(0x014) +#define GPTIMER1_TISR GPT1_REG32(0x018) +#define GPTIMER1_TIER GPT1_REG32(0x01C) +#define GPTIMER1_TWER GPT1_REG32(0x020) +#define GPTIMER1_TCLR GPT1_REG32(0x024) +#define GPTIMER1_TCRR GPT1_REG32(0x028) +#define GPTIMER1_TLDR GPT1_REG32(0x02C) +#define GPTIMER1_TTGR GPT1_REG32(0x030) +#define GPTIMER1_TWPS GPT1_REG32(0x034) +#define GPTIMER1_TMAR GPT1_REG32(0x038) +#define GPTIMER1_TCAR1 GPT1_REG32(0x03C) +#define GPTIMER1_TSICR GPT1_REG32(0x040) +#define GPTIMER1_TCAR2 GPT1_REG32(0x044) + +/* rkw -- base fix up please... */ +#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018) + +/* SDRC */ +#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060) +#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064) +#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068) +#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C) +#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070) +#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084) + +/* GPIO 1 */ +#define GPIO1_BASE GPIOX_BASE(1) +#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset)) +#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C) +#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018) +#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C) +#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028) +#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020) +#define GPIO1_RISINGDETECT GPIO1_REG32(0x048) +#define GPIO1_DATAIN GPIO1_REG32(0x038) +#define GPIO1_OE GPIO1_REG32(0x034) +#define GPIO1_DATAOUT GPIO1_REG32(0x03C) + +/* GPIO2 */ +#define GPIO2_BASE GPIOX_BASE(2) +#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset)) +#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C) +#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018) +#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C) +#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028) +#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020) +#define GPIO2_RISINGDETECT GPIO2_REG32(0x048) +#define GPIO2_DATAIN GPIO2_REG32(0x038) +#define GPIO2_OE GPIO2_REG32(0x034) +#define GPIO2_DATAOUT GPIO2_REG32(0x03C) + +/* GPIO 3 */ +#define GPIO3_BASE GPIOX_BASE(3) +#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset)) +#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C) +#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018) +#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C) +#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028) +#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020) +#define GPIO3_RISINGDETECT GPIO3_REG32(0x048) +#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C) +#define GPIO3_DATAIN GPIO3_REG32(0x038) +#define GPIO3_OE GPIO3_REG32(0x034) +#define GPIO3_DATAOUT GPIO3_REG32(0x03C) +#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) +#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) + +/* GPIO 4 */ +#define GPIO4_BASE GPIOX_BASE(4) +#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset)) +#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C) +#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018) +#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C) +#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028) +#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020) +#define GPIO4_RISINGDETECT GPIO4_REG32(0x048) +#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C) +#define GPIO4_DATAIN GPIO4_REG32(0x038) +#define GPIO4_OE GPIO4_REG32(0x034) +#define GPIO4_DATAOUT GPIO4_REG32(0x03C) +#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) +#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) + + +/* IO CONFIG */ +#define CONTROL_BASE (OMAP24XX_CTRL_BASE) +#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset)) + +#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) +#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) +#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8) +#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) +#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) +#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) +#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) +#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) +#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) + +/* CONTROL */ +#define CONTROL_DEVCONF CONTROL_REG32(0x274) + +/* INTERRUPT CONTROLLER */ +#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000) +#define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) + +#define INTC1_U_BASE INTC_REG32(0x000) +#define INTC_MIR0 INTC_REG32(0x084) +#define INTC_MIR_SET0 INTC_REG32(0x08C) +#define INTC_MIR_CLEAR0 INTC_REG32(0x088) +#define INTC_ISR_CLEAR0 INTC_REG32(0x094) +#define INTC_MIR1 INTC_REG32(0x0A4) +#define INTC_MIR_SET1 INTC_REG32(0x0AC) +#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8) +#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4) +#define INTC_MIR2 INTC_REG32(0x0C4) +#define INTC_MIR_SET2 INTC_REG32(0x0CC) +#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8) +#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) +#define INTC_SIR_IRQ INTC_REG32(0x040) +#define INTC_CONTROL INTC_REG32(0x048) +#define INTC_ILR11 INTC_REG32(0x12C) +#define INTC_ILR32 INTC_REG32(0x180) +#define INTC_ILR37 INTC_REG32(0x194) +#define INTC_SYSCONFIG INTC_REG32(0x010) + +/* RAM FIREWALL */ +#define RAMFW_BASE (0x68005000) +#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset)) + +#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048) +#define RAMFW_READPERM0 RAMFW_REG32(0x050) +#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058) + +/* GPMC CS1 FPGA ON USER INTERFACE MODULE */ +//#define DEBUG_BOARD_LED_REGISTER 0x04000014 + +/* GPMC CS0 */ +#define GPMC_CONFIG1_0 GPMC_REG32(0x060) +#define GPMC_CONFIG2_0 GPMC_REG32(0x064) +#define GPMC_CONFIG3_0 GPMC_REG32(0x068) +#define GPMC_CONFIG4_0 GPMC_REG32(0x06C) +#define GPMC_CONFIG5_0 GPMC_REG32(0x070) +#define GPMC_CONFIG6_0 GPMC_REG32(0x074) +#define GPMC_CONFIG7_0 GPMC_REG32(0x078) + +/* DSS */ +#define DSS_CONTROL DISP_REG32(0x040) +#define DISPC_CONTROL DISP_REG32(0x440) +#define DISPC_SYSSTATUS DISP_REG32(0x414) +#define DISPC_IRQSTATUS DISP_REG32(0x418) +#define DISPC_IRQENABLE DISP_REG32(0x41C) +#define DISPC_CONFIG DISP_REG32(0x444) +#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C) +#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450) +#define DISPC_TRANS_COLOR0 DISP_REG32(0x454) +#define DISPC_TRANS_COLOR1 DISP_REG32(0x458) +#define DISPC_LINE_NUMBER DISP_REG32(0x460) +#define DISPC_TIMING_H DISP_REG32(0x464) +#define DISPC_TIMING_V DISP_REG32(0x468) +#define DISPC_POL_FREQ DISP_REG32(0x46C) +#define DISPC_DIVISOR DISP_REG32(0x470) +#define DISPC_SIZE_DIG DISP_REG32(0x478) +#define DISPC_SIZE_LCD DISP_REG32(0x47C) +#define DISPC_GFX_BA0 DISP_REG32(0x480) +#define DISPC_GFX_BA1 DISP_REG32(0x484) +#define DISPC_GFX_POSITION DISP_REG32(0x488) +#define DISPC_GFX_SIZE DISP_REG32(0x48C) +#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0) +#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4) +#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC) +#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0) +#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4) +#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8) +#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4) +#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) +#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) + +/* Wake up define for board */ +#define GPIO97 (1 << 1) +#define GPIO88 (1 << 24) + +#endif /* __ASSEMBLER__ */ + +#endif + + + + + diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c new file mode 100644 index 00000000000..f4df04fe1dd --- /dev/null +++ b/arch/arm/mach-omap2/serial.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-omap/omap2/serial.c + * + * OMAP2 serial support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Based off of arch/arm/mach-omap/omap1/serial.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/common.h> +#include <asm/arch/board.h> + +static struct clk * uart1_ick = NULL; +static struct clk * uart1_fck = NULL; +static struct clk * uart2_ick = NULL; +static struct clk * uart2_fck = NULL; +static struct clk * uart3_ick = NULL; +static struct clk * uart3_fck = NULL; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = (unsigned long)OMAP_UART1_BASE, + .irq = 72, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = (unsigned long)OMAP_UART2_BASE, + .irq = 73, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = (unsigned long)OMAP_UART3_BASE, + .irq = 74, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .flags = 0 + } +}; + +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) +{ + offset <<= p->regshift; + __raw_writeb(value, (unsigned long)(p->membase + offset)); +} + +/* + * Internal UARTs need to be initialized for the 8250 autoconfig to work + * properly. Note that the TX watermark initialization may not be needed + * once the 8250.c watermark handling code is merged. + */ +static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +{ + serial_write_reg(p, UART_OMAP_MDR1, 0x07); + serial_write_reg(p, UART_OMAP_SCR, 0x08); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); + serial_write_reg(p, UART_OMAP_SYSC, 0x01); +} + +void __init omap_serial_init() +{ + int i; + const struct omap_uart_config *info; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + + info = omap_get_config(OMAP_TAG_UART, + struct omap_uart_config); + + if (info == NULL) + return; + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->membase = 0; + p->mapbase = 0; + continue; + } + + switch (i) { + case 0: + uart1_ick = clk_get(NULL, "uart1_ick"); + if (IS_ERR(uart1_ick)) + printk("Could not get uart1_ick\n"); + else { + clk_use(uart1_ick); + } + + uart1_fck = clk_get(NULL, "uart1_fck"); + if (IS_ERR(uart1_fck)) + printk("Could not get uart1_fck\n"); + else { + clk_use(uart1_fck); + } + break; + case 1: + uart2_ick = clk_get(NULL, "uart2_ick"); + if (IS_ERR(uart2_ick)) + printk("Could not get uart2_ick\n"); + else { + clk_use(uart2_ick); + } + + uart2_fck = clk_get(NULL, "uart2_fck"); + if (IS_ERR(uart2_fck)) + printk("Could not get uart2_fck\n"); + else { + clk_use(uart2_fck); + } + break; + case 2: + uart3_ick = clk_get(NULL, "uart3_ick"); + if (IS_ERR(uart3_ick)) + printk("Could not get uart3_ick\n"); + else { + clk_use(uart3_ick); + } + + uart3_fck = clk_get(NULL, "uart3_fck"); + if (IS_ERR(uart3_fck)) + printk("Could not get uart3_fck\n"); + else { + clk_use(uart3_fck); + } + break; + } + + omap_serial_reset(p); + } +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init omap_init(void) +{ + return platform_device_register(&serial_device); +} +arch_initcall(omap_init); diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S new file mode 100644 index 00000000000..2a869e20334 --- /dev/null +++ b/arch/arm/mach-omap2/sram-fn.S @@ -0,0 +1,333 @@ +/* + * linux/arch/arm/mach-omap1/sram.S + * + * Omap2 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/hardware.h> + +#include <asm/arch/prcm.h> + +#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) + +#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544) +#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050) +#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080) +#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500) +#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520) +#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540) + +#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060) +#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4) + + .text + +ENTRY(sram_ddr_init) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r12, r2 @ capture CS1 vs CS0 + mov r8, r3 @ capture force parameter + + /* frequency shift down */ + ldr r2, cm_clksel2_pll @ get address of dpllout reg + mov r3, #0x1 @ value for 1x operation + str r3, [r2] @ go to L1-freq operation + + /* voltage shift down */ + mov r9, #0x1 @ set up for L1 voltage call + bl voltage_shift @ go drop voltage + + /* dll lock mode */ + ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl + ldr r10, [r11] @ get current val + cmp r12, #0x1 @ cs1 base (2422 es2.05/1) + addeq r11, r11, #0x8 @ if cs1 base, move to DLLB + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode. + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + str r10, [r11] @ commit to DLLA_CTRL + bl i_dll_wait @ wait for dll to lock + + /* get dll value */ + add r11, r11, #0x4 @ get addr of status reg + ldr r10, [r11] @ get locked value + + /* voltage shift up */ + mov r9, #0x0 @ shift back to L0-voltage + bl voltage_shift @ go raise voltage + + /* frequency shift up */ + mov r3, #0x2 @ value for 2x operation + str r3, [r2] @ go to L0-freq operation + + /* reset entry mode for dllctrl */ + sub r11, r11, #0x4 @ move from status to ctrl + cmp r12, #0x1 @ normalize if cs1 based + subeq r11, r11, #0x8 @ possibly back to DLLA + cmp r8, #0x1 @ if forced unlock exit + orreq r1, r1, #0x4 @ make sure exit with unlocked value + str r1, [r11] @ restore DLLA_CTRL high value + add r11, r11, #0x8 @ move to DLLB_CTRL addr + str r1, [r11] @ set value DLLB_CTRL + bl i_dll_wait @ wait for possible lock + + /* set up for return, DDR should be good */ + str r10, [r0] @ write dll_status and return counter + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + + /* ensure the DLL has relocked */ +i_dll_wait: + mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + mov pc, lr + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift: + ldr r4, prcm_voltctrl @ get addr of volt ctrl. + ldr r5, [r4] @ get value. + ldr r6, prcm_mask_val @ get value of mask + and r5, r5, r6 @ apply mask to clear bits + orr r5, r5, r9 @ bulld value for L0/L1-volt operation. + str r5, [r4] @ set up for change. + mov r3, #0x4000 @ get val for force + orr r5, r5, r3 @ build value for force + str r5, [r4] @ Force transition to L1 + + ldr r3, timer_32ksynct_cr @ get addr of counter + ldr r5, [r3] @ get value + add r5, r5, #0x3 @ give it at most 93uS +volt_delay: + ldr r7, [r3] @ get timer value + cmp r5, r7 @ time up? + bhi volt_delay @ not yet->branch + mov pc, lr @ back to caller. + +/* relative load constants */ +cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +prcm_voltctrl: + .word PRCM_VOLTCTRL_V +prcm_mask_val: + .word 0xFFFF3FFC +timer_32ksynct_cr: + .word TIMER_32KSYNCT_CR_V +ENTRY(sram_ddr_init_sz) + .word . - sram_ddr_init + +/* + * Reprograms memory timings. + * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] + * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 + */ +ENTRY(sram_reprogram_sdrc) + stmfd sp!, {r0 - r10, lr} @ save registers on stack + mov r3, #0x0 @ clear for mrc call + mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR + nop + nop + ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg + ldr r5, [r6] @ get value + mov r5, r5, lsr #8 @ isolate rfr field and drop burst + + cmp r0, #0x1 @ going to half speed? + movne r9, #0x0 @ if up set flag up for pre up, hi volt + + blne voltage_shift_c @ adjust voltage + + cmp r0, #0x1 @ going to half speed (post branch link) + moveq r5, r5, lsr #1 @ divide by 2 if to half + movne r5, r5, lsl #1 @ mult by 2 if to full + mov r5, r5, lsl #8 @ put rfr field back into place + add r5, r5, #0x1 @ turn on burst of 1 + ldr r4, ddr_cm_clksel2_pll @ get address of out reg + ldr r3, [r4] @ get curr value + orr r3, r3, #0x3 + bic r3, r3, #0x3 @ clear lower bits + orr r3, r3, r0 @ new state value + str r3, [r4] @ set new state (pll/x, x=1 or 2) + nop + nop + + moveq r9, #0x1 @ if speed down, post down, drop volt + bleq voltage_shift_c + + mcr p15, 0, r3, c7, c10, 4 @ memory barrier + str r5, [r6] @ set new RFR_1 value + add r6, r6, #0x30 @ get RFR_2 addr + str r5, [r6] @ set RFR_2 + nop + cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL + bne freq_out @ leave if SDR, no DLL function + + /* With DDR, we need to take care of the DLL for the frequency change */ + ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl + str r1, [r2] @ write out new SDRC_DLLA_CTRL + add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL + str r1, [r2] @ commit to SDRC_DLLB_CTRL + mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks +dll_wait: + subs r1, r1, #0x1 + bne dll_wait +freq_out: + ldmfd sp!, {r0 - r10, pc} @ restore regs and return + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift_c: + ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl + ldr r8, [r10] @ get value + ldr r7, ddr_prcm_mask_val @ get value of mask + and r8, r8, r7 @ apply mask to clear bits + orr r8, r8, r9 @ bulld value for L0/L1-volt operation. + str r8, [r10] @ set up for change. + mov r7, #0x4000 @ get val for force + orr r8, r8, r7 @ build value for force + str r8, [r10] @ Force transition to L1 + + ldr r10, ddr_timer_32ksynct @ get addr of counter + ldr r8, [r10] @ get value + add r8, r8, #0x2 @ give it at most 62uS (min 31+) +volt_delay_c: + ldr r7, [r10] @ get timer value + cmp r8, r7 @ time up? + bhi volt_delay_c @ not yet->branch + mov pc, lr @ back to caller + +ddr_cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +ddr_sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +ddr_sdrc_rfr_ctrl: + .word SDRC_RFR_CTRL_V +ddr_prcm_voltctrl: + .word PRCM_VOLTCTRL_V +ddr_prcm_mask_val: + .word 0xFFFF3FFC +ddr_timer_32ksynct: + .word TIMER_32KSYNCT_CR_V + +ENTRY(sram_reprogram_sdrc_sz) + .word . - sram_reprogram_sdrc + +/* + * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. + */ +ENTRY(sram_set_prcm) + stmfd sp!, {r0-r12, lr} @ regs to stack + adr r4, pbegin @ addr of preload start + adr r8, pend @ addr of preload end + mcrr p15, 1, r8, r4, c12 @ preload into icache +pbegin: + /* move into fast relock bypass */ + ldr r8, pll_ctl @ get addr + ldr r5, [r8] @ get val + mvn r6, #0x3 @ clear mask + and r5, r5, r6 @ clear field + orr r7, r5, #0x2 @ fast relock val + str r7, [r8] @ go to fast relock + ldr r4, pll_stat @ addr of stat +block: + /* wait for bypass */ + ldr r8, [r4] @ stat value + and r8, r8, #0x3 @ mask for stat + cmp r8, #0x1 @ there yet + bne block @ loop if not + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div @ get addr + str r0, [r4] @ set dpll ctrl val + + ldr r4, set_config @ get addr + mov r8, #1 @ valid cfg msk + str r8, [r4] @ make dividers take + + mov r4, #100 @ dead spin a bit +wait_a_bit: + subs r4, r4, #1 @ dec loop + bne wait_a_bit @ delay done? + + /* check if staying in bypass */ + cmp r2, #0x1 @ stay in bypass? + beq pend @ jump over dpll relock + + /* relock DPLL with new vals */ + ldr r5, pll_stat @ get addr + ldr r4, pll_ctl @ get addr + orr r8, r7, #0x3 @ val for lock dpll + str r8, [r4] @ set val + mov r0, #1000 @ dead spin a bit +wait_more: + subs r0, r0, #1 @ dec loop + bne wait_more @ delay done? +wait_lock: + ldr r8, [r5] @ get lock val + and r8, r8, #3 @ isolate field + cmp r8, #2 @ locked? + bne wait_lock @ wait if not +pend: + /* update memory timings & briefly lock dll */ + ldr r4, sdrc_rfr @ get addr + str r1, [r4] @ update refresh timing + ldr r11, dlla_ctrl @ get addr of DLLA ctrl + ldr r10, [r11] @ get current val + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + str r10, [r11] @ commit to DLLA_CTRL + add r11, r11, #0x8 @ move to dllb + str r10, [r11] @ hit DLLB also + + mov r4, #0x800 @ relock time (min 0x400 L3 clocks) +wait_dll_lock: + subs r4, r4, #0x1 + bne wait_dll_lock + nop + ldmfd sp!, {r0-r12, pc} @ restore regs and return + +set_config: + .word PRCM_CLKCFG_CTRL_V +pll_ctl: + .word CM_CLKEN_PLL_V +pll_stat: + .word CM_IDLEST_CKGEN_V +pll_div: + .word CM_CLKSEL1_PLL_V +sdrc_rfr: + .word SDRC_RFR_CTRL_V +dlla_ctrl: + .word SDRC_DLLA_CTRL_V + +ENTRY(sram_set_prcm_sz) + .word . - sram_set_prcm diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c new file mode 100644 index 00000000000..9ec11443200 --- /dev/null +++ b/arch/arm/mach-omap2/timer-gp.c @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/mach-omap2/timer-gp.c + * + * OMAP2 GP timer support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <asm/mach/time.h> +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#define OMAP2_GP_TIMER1_BASE 0x48028000 +#define OMAP2_GP_TIMER2_BASE 0x4802a000 +#define OMAP2_GP_TIMER3_BASE 0x48078000 +#define OMAP2_GP_TIMER4_BASE 0x4807a000 + +#define GP_TIMER_TIDR 0x00 +#define GP_TIMER_TISR 0x18 +#define GP_TIMER_TIER 0x1c +#define GP_TIMER_TCLR 0x24 +#define GP_TIMER_TCRR 0x28 +#define GP_TIMER_TLDR 0x2c +#define GP_TIMER_TSICR 0x40 + +#define OS_TIMER_NR 1 /* GP timer 2 */ + +static unsigned long timer_base[] = { + IO_ADDRESS(OMAP2_GP_TIMER1_BASE), + IO_ADDRESS(OMAP2_GP_TIMER2_BASE), + IO_ADDRESS(OMAP2_GP_TIMER3_BASE), + IO_ADDRESS(OMAP2_GP_TIMER4_BASE), +}; + +static inline unsigned int timer_read_reg(int nr, unsigned int reg) +{ + return __raw_readl(timer_base[nr] + reg); +} + +static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val) +{ + __raw_writel(val, timer_base[nr] + reg); +} + +/* Note that we always enable the clock prescale divider bit */ +static inline void omap2_gp_timer_start(int nr, unsigned long load_val) +{ + unsigned int tmp; + + tmp = 0xffffffff - load_val; + + timer_write_reg(nr, GP_TIMER_TLDR, tmp); + timer_write_reg(nr, GP_TIMER_TCRR, tmp); + timer_write_reg(nr, GP_TIMER_TIER, 1 << 1); + timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1); +} + +static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1); + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction omap2_gp_timer_irq = { + .name = "gp timer", + .flags = SA_INTERRUPT, + .handler = omap2_gp_timer_interrupt, +}; + +static void __init omap2_gp_timer_init(void) +{ + struct clk * sys_ck; + u32 tick_period = 120000; + u32 l; + + /* Reset clock and prescale value */ + timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0); + + sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(sys_ck)) + printk(KERN_ERR "Could not get sys_ck\n"); + else { + clk_use(sys_ck); + tick_period = clk_get_rate(sys_ck) / 100; + clk_put(sys_ck); + } + + tick_period /= 2; /* Minimum prescale divider is 2 */ + tick_period -= 1; + + l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR); + printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n", + (l >> 4) & 0x0f, l & 0x0f); + + setup_irq(38, &omap2_gp_timer_irq); + + omap2_gp_timer_start(OS_TIMER_NR, tick_period); +} + +struct sys_timer omap_timer = { + .init = omap2_gp_timer_init, +}; + diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4e8d19318d2..e84fdde6edf 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 |